From 0c0436f47c296513dace43d3ba20e3cc36f8f527 Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Sun, 25 Mar 2012 17:46:26 +0200 Subject: Board, rev A. --- firmware/LUFA/Drivers/USB/LowLevel/Device.h | 247 ++++++++++++++++++++++++++++ 1 file changed, 247 insertions(+) create mode 100644 firmware/LUFA/Drivers/USB/LowLevel/Device.h (limited to 'firmware/LUFA/Drivers/USB/LowLevel/Device.h') diff --git a/firmware/LUFA/Drivers/USB/LowLevel/Device.h b/firmware/LUFA/Drivers/USB/LowLevel/Device.h new file mode 100644 index 0000000..631c883 --- /dev/null +++ b/firmware/LUFA/Drivers/USB/LowLevel/Device.h @@ -0,0 +1,247 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB device mode definitions. + * + * This file contains structures, function prototypes and macros related to USB device mode. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * @defgroup Group_Device Device Management + * + * USB Device mode related macros and enums. This module contains macros and enums which are used when + * the USB controller is initialized in device mode. + * + * @{ + */ + +#ifndef __USBDEVICE_H__ +#define __USBDEVICE_H__ + + /* Includes: */ + #include + #include + #include + + #include "../../../Common/Common.h" + #include "../HighLevel/StdDescriptors.h" + #include "USBInterrupt.h" + #include "Endpoint.h" + + /* Preprocessor Checks: */ + #if (defined(USE_RAM_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS)) + #error USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive. + #endif + + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name USB Device Mode Option Masks */ + //@{ + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__) + /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the + * USB interface should be initialized in low speed (1.5Mb/s) mode. + * + * \note Low Speed mode is not available on all USB AVR models. + * \n + * + * \note Restrictions apply on the number, size and type of endpoints which can be used + * when running in low speed mode - refer to the USB 2.0 specification. + */ + #define USB_DEVICE_OPT_LOWSPEED (1 << 0) + #endif + + /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the + * USB interface should be initialized in full speed (12Mb/s) mode. + */ + #define USB_DEVICE_OPT_FULLSPEED (0 << 0) + //@} + + /* Function Prototypes: */ + /** Sends a Remote Wakeup request to the host. This signals to the host that the device should + * be taken out of suspended mode, and communications should resume. + * + * Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the + * host computer when the host has suspended all USB devices to enter a low power state. + * + * \note This macro should only be used if the device has indicated to the host that it + * supports the Remote Wakeup feature in the device descriptors, and should only be + * issued if the host is currently allowing remote wakeup events from the device (i.e., + * the \ref USB_RemoteWakeupEnabled flag is set). When the NO_DEVICE_REMOTE_WAKEUP compile + * time option is used, this macro is unavailable. + * \n\n + * + * \note The USB clock must be running for this function to operate. If the stack is initialized with + * the \ref USB_OPT_MANUAL_PLL option enabled, the user must ensure that the PLL is running + * before attempting to call this function. + * + * \see \ref Group_Descriptors for more information on the RMWAKEUP feature and device descriptors. + */ + void USB_Device_SendRemoteWakeup(void); + + /* Type Defines: */ + enum USB_Device_States_t + { + DEVICE_STATE_Unattached = 0, /**< Internally implemented by the library. This state indicates + * that the device is not currently connected to a host. + */ + DEVICE_STATE_Powered = 1, /**< Internally implemented by the library. This state indicates + * that the device is connected to a host, but enumeration has not + * yet begun. + */ + DEVICE_STATE_Default = 2, /**< Internally implemented by the library. This state indicates + * that the device's USB bus has been reset by the host and it is + * now waiting for the host to begin the enumeration process. + */ + DEVICE_STATE_Addressed = 3, /**< Internally implemented by the library. This state indicates + * that the device has been addressed by the USB Host, but is not + * yet configured. + */ + DEVICE_STATE_Configured = 4, /**< May be implemented by the user project. This state indicates + * that the device has been enumerated by the host and is ready + * for USB communications to begin. + */ + DEVICE_STATE_Suspended = 5, /**< May be implemented by the user project. This state indicates + * that the USB bus has been suspended by the host, and the device + * should power down to a minimal power level until the bus is + * resumed. + */ + }; + + /* Inline Functions: */ + /** Returns the current USB frame number, when in device mode. Every millisecond the USB bus is active (i.e. enumerated to a host) + * the frame number is incremented by one. + */ + static inline uint16_t USB_Device_GetFrameNumber(void) + { + return UDFNUM; + } + + #if !defined(NO_SOF_EVENTS) + /** Enables the device mode Start Of Frame events. When enabled, this causes the + * \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus, + * at the start of each USB frame when enumerated in device mode. + * + * \note Not available when the NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_EnableSOFEvents(void) + { + USB_INT_Enable(USB_INT_SOFI); + } + + /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the + * \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode. + * + * \note Not available when the NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_DisableSOFEvents(void) + { + USB_INT_Disable(USB_INT_SOFI); + } + #endif + + /* Function Prototypes: */ + /** Function to retrieve a given descriptor's size and memory location from the given descriptor type value, + * index and language ID. This function MUST be overridden in the user application (added with full, identical + * prototype and name so that the library can call it to retrieve descriptor data. + * + * \param[in] wValue The type of the descriptor to retrieve in the upper byte, and the index in the + * lower byte (when more than one descriptor of the given type exists, such as the + * case of string descriptors). The type may be one of the standard types defined + * in the DescriptorTypes_t enum, or may be a class-specific descriptor type value. + * \param[in] wIndex The language ID of the string to return if the wValue type indicates DTYPE_String, + * otherwise zero for standard descriptors, or as defined in a class-specific + * standards. + * \param[out] DescriptorAddress Pointer to the descriptor in memory. This should be set by the routine to + * the address of the descriptor. + * \param[out] MemoryAddressSpace A value from the \ref USB_DescriptorMemorySpaces_t enum to indicate the memory + * space in which the descriptor is stored. This parameter does not exist when one + * of the USE_*_DESCRIPTORS compile time options is used. + * + * \note By default, the library expects all descriptors to be located in flash memory via the PROGMEM attribute. + * If descriptors should be located in RAM or EEPROM instead (to speed up access in the case of RAM, or to + * allow the descriptors to be changed dynamically at runtime) either the USE_RAM_DESCRIPTORS or the + * USE_EEPROM_DESCRIPTORS tokens may be defined in the project makefile and passed to the compiler by the -D + * switch. + * + * \return Size in bytes of the descriptor if it exists, zero or \ref NO_DESCRIPTOR otherwise. + */ + uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + const void** const DescriptorAddress + #if !defined(USE_FLASH_DESCRIPTORS) && !defined(USE_EEPROM_DESCRIPTORS) && !defined(USE_RAM_DESCRIPTORS) + , uint8_t* MemoryAddressSpace + #endif + ) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Inline Functions: */ + #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)) + static inline void USB_Device_SetLowSpeed(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetLowSpeed(void) + { + UDCON |= (1 << LSM); + } + + static inline void USB_Device_SetFullSpeed(void) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetFullSpeed(void) + { + UDCON &= ~(1 << LSM); + } + #endif + + static inline void USB_Device_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void USB_Device_SetDeviceAddress(const uint8_t Address) + { + UDADDR = ((UDADDR & (1 << ADDEN)) | (Address & 0x7F)); + UDADDR |= (1 << ADDEN); + } + + static inline bool USB_Device_IsAddressSet(void) ATTR_ALWAYS_INLINE; + static inline bool USB_Device_IsAddressSet(void) + { + return (UDADDR & (1 << ADDEN)); + } + #endif + +#endif + +/** @} */ + -- cgit v1.2.3