From 0c0436f47c296513dace43d3ba20e3cc36f8f527 Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Sun, 25 Mar 2012 17:46:26 +0200 Subject: Board, rev A. --- firmware/LUFA/Drivers/USB/LowLevel/Host.h | 527 ++++++++++++++++++++++++++++++ 1 file changed, 527 insertions(+) create mode 100644 firmware/LUFA/Drivers/USB/LowLevel/Host.h (limited to 'firmware/LUFA/Drivers/USB/LowLevel/Host.h') diff --git a/firmware/LUFA/Drivers/USB/LowLevel/Host.h b/firmware/LUFA/Drivers/USB/LowLevel/Host.h new file mode 100644 index 0000000..dce3a95 --- /dev/null +++ b/firmware/LUFA/Drivers/USB/LowLevel/Host.h @@ -0,0 +1,527 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB host mode definitions. + * + * This file contains structures, function prototypes and macros related to USB host mode. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * @defgroup Group_Host Host Management + * + * USB Host mode related macros and enums. This module contains macros and enums which are used when + * the USB controller is initialized in host mode. + * + * @{ + */ + +#ifndef __USBHOST_H__ +#define __USBHOST_H__ + + /* Includes: */ + #include + #include + #include + + #include "../../../Common/Common.h" + #include "../HighLevel/StdDescriptors.h" + #include "Pipe.h" + #include "USBInterrupt.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Indicates the fixed USB device address which any attached device is enumerated to when in + * host mode. As only one USB device may be attached to the AVR in host mode at any one time + * and that the address used is not important (other than the fact that it is non-zero), a + * fixed value is specified by the library. + */ + #define USB_HOST_DEVICEADDRESS 1 + + #if !defined(USB_HOST_TIMEOUT_MS) || defined(__DOXYGEN__) + /** Constant for the maximum software timeout period of sent USB control transactions to an attached + * device. If a device fails to respond to a sent control request within this period, the + * library will return a timeout error code. + * + * This value may be overridden in the user project makefile as the value of the + * \ref USB_HOST_TIMEOUT_MS token, and passed to the compiler using the -D switch. + */ + #define USB_HOST_TIMEOUT_MS 1000 + #endif + + #if !defined(HOST_DEVICE_SETTLE_DELAY_MS) || defined(__DOXYGEN__) + /** Constant for the delay in milliseconds after a device is connected before the library + * will start the enumeration process. Some devices require a delay of up to 5 seconds + * after connection before the enumeration process can start or incorrect operation will + * occur. + * + * The default delay value may be overridden in the user project makefile by definining the + * HOST_DEVICE_SETTLE_DELAY_MS token to tbe required delay in milliseconds, and passed to the + * compiler using the -D switch. + */ + #define HOST_DEVICE_SETTLE_DELAY_MS 1000 + #endif + + /* Enums: */ + /** Enum for the various states of the USB Host state machine. Only some states are + * implemented in the LUFA library - other states are left to the user to implement. + * + * For information on each possible USB host state, refer to the USB 2.0 specification. + * Several of the USB host states are broken up further into multiple smaller sub-states, + * so that they can be internally implemented inside the library in an efficient manner. + * + * \see \ref USB_HostState, which stores the current host state machine state. + */ + enum USB_Host_States_t + { + HOST_STATE_WaitForDeviceRemoval = 0, /**< Internally implemented by the library. This state can be + * used by the library to wait until the attached device is + * removed by the user - useful for when an error occurs or + * further communication with the device is not needed. This + * allows for other code to run while the state machine is + * effectively disabled. + */ + HOST_STATE_WaitForDevice = 1, /**< Internally implemented by the library. This state indicates + * that the stack is waiting for an interval to elapse before + * continuing with the next step of the device enumeration + * process. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Unattached = 2, /**< Internally implemented by the library. This state indicates + * that the host state machine is waiting for a device to be + * attached so that it can start the enumeration process. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Powered = 3, /**< Internally implemented by the library. This state indicates + * that a device has been attached, and the library's internals + * are being configured to begin the enumeration process. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Powered_WaitForDeviceSettle = 4, /**< Internally implemented by the library. This state indicates + * that the stack is waiting for the initial settling period to + * elapse before beginning the enumeration process. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Powered_WaitForConnect = 5, /**< Internally implemented by the library. This state indicates + * that the stack is waiting for a connection event from the USB + * controller to indicate a valid USB device has been attached to + * the bus and is ready to be enumerated. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Powered_DoReset = 6, /**< Internally implemented by the library. This state indicates + * that a valid USB device has been attached, and that it is + * will now be reset to ensure it is ready for enumeration. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Powered_ConfigPipe = 7, /**< Internally implemented by the library. This state indicates + * that the attached device is currently powered and reset, and + * that the control pipe is now being configured by the stack. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Default = 8, /**< Internally implemented by the library. This state indicates + * that the stack is currently retrieving the control endpoint's + * size from the device, so that the control pipe can be altered + * to match. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Default_PostReset = 9, /**< Internally implemented by the library. This state indicates that + * the control pipe is being reconfigured to match the retrieved + * control endpoint size from the device, and the device's USB bus + * address is being set. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Default_PostAddressSet = 10, /**< Internally implemented by the library. This state indicates that + * the device's address has now been set, and the stack is has now + * completed the device enumeration process. This state causes the + * stack to change the current USB device address to that set for + * the connected device, before progressing to the user-implemented + * \ref HOST_STATE_Addressed state for further communications. + * + * \note Do not manually change to this state in the user code. + */ + HOST_STATE_Addressed = 11, /**< May be implemented by the user project. This state should + * set the device configuration before progressing to the + * \ref HOST_STATE_Configured state. Other processing (such as the + * retrieval and processing of the device descriptor) should also + * be placed in this state. + */ + HOST_STATE_Configured = 12, /**< May be implemented by the user project. This state should implement the + * actual work performed on the attached device and changed to the + * \ref HOST_STATE_Suspended or \ref HOST_STATE_WaitForDeviceRemoval states as needed. + */ + HOST_STATE_Suspended = 15, /**< May be implemented by the user project. This state should be maintained + * while the bus is suspended, and changed to either the \ref HOST_STATE_Configured + * (after resuming the bus with the USB_Host_ResumeBus() macro) or the + * \ref HOST_STATE_WaitForDeviceRemoval states as needed. + */ + }; + + /** Enum for the error codes for the \ref EVENT_USB_Host_HostError() event. + * + * \see \ref Group_Events for more information on this event. + */ + enum USB_Host_ErrorCodes_t + { + HOST_ERROR_VBusVoltageDip = 0, /**< VBUS voltage dipped to an unacceptable level. This + * error may be the result of an attached device drawing + * too much current from the VBUS line, or due to the + * AVR's power source being unable to supply sufficient + * current. + */ + }; + + /** Enum for the error codes for the \ref EVENT_USB_Host_DeviceEnumerationFailed() event. + * + * \see \ref Group_Events for more information on this event. + */ + enum USB_Host_EnumerationErrorCodes_t + { + HOST_ENUMERROR_NoError = 0, /**< No error occurred. Used internally, this is not a valid + * ErrorCode parameter value for the \ref EVENT_USB_Host_DeviceEnumerationFailed() + * event. + */ + HOST_ENUMERROR_WaitStage = 1, /**< One of the delays between enumeration steps failed + * to complete successfully, due to a timeout or other + * error. + */ + HOST_ENUMERROR_NoDeviceDetected = 2, /**< No device was detected, despite the USB data lines + * indicating the attachment of a device. + */ + HOST_ENUMERROR_ControlError = 3, /**< One of the enumeration control requests failed to + * complete successfully. + */ + HOST_ENUMERROR_PipeConfigError = 4, /**< The default control pipe (address 0) failed to + * configure correctly. + */ + }; + + /* Inline Functions: */ + /** Returns the current USB frame number, when in host mode. Every millisecond the USB bus is active (i.e. not suspended) + * the frame number is incremented by one. + */ + static inline uint16_t USB_Host_GetFrameNumber(void) + { + return UHFNUM; + } + + #if !defined(NO_SOF_EVENTS) + /** Enables the host mode Start Of Frame events. When enabled, this causes the + * \ref EVENT_USB_Host_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus, + * at the start of each USB frame when a device is enumerated while in host mode. + * + * \note Not available when the NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Host_EnableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_EnableSOFEvents(void) + { + USB_INT_Enable(USB_INT_HSOFI); + } + + /** Disables the host mode Start Of Frame events. When disabled, this stops the firing of the + * \ref EVENT_USB_Host_StartOfFrame() event when enumerated in host mode. + * + * \note Not available when the NO_SOF_EVENTS compile time token is defined. + */ + static inline void USB_Host_DisableSOFEvents(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_DisableSOFEvents(void) + { + USB_INT_Disable(USB_INT_HSOFI); + } + #endif + + /** Resets the USB bus, including the endpoints in any attached device and pipes on the AVR host. + * USB bus resets leave the default control pipe configured (if already configured). + * + * If the USB bus has been suspended prior to issuing a bus reset, the attached device will be + * woken up automatically and the bus resumed after the reset has been correctly issued. + */ + static inline void USB_Host_ResetBus(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_ResetBus(void) + { + UHCON |= (1 << RESET); + } + + /** Determines if a previously issued bus reset (via the \ref USB_Host_ResetBus() macro) has + * completed. + * + * \return Boolean true if no bus reset is currently being sent, false otherwise. + */ + static inline bool USB_Host_IsBusResetComplete(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsBusResetComplete(void) + { + return ((UHCON & (1 << RESET)) ? false : true); + } + + /** Resumes USB communications with an attached and enumerated device, by resuming the transmission + * of the 1MS Start Of Frame messages to the device. When resumed, USB communications between the + * host and attached device may occur. + */ + static inline void USB_Host_ResumeBus(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_ResumeBus(void) + { + UHCON |= (1 << SOFEN); + } + + /** Suspends the USB bus, preventing any communications from occurring between the host and attached + * device until the bus has been resumed. This stops the transmission of the 1MS Start Of Frame + * messages to the device. + */ + static inline void USB_Host_SuspendBus(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_SuspendBus(void) + { + UHCON &= ~(1 << SOFEN); + } + + /** Determines if the USB bus has been suspended via the use of the \ref USB_Host_SuspendBus() macro, + * false otherwise. While suspended, no USB communications can occur until the bus is resumed, + * except for the Remote Wakeup event from the device if supported. + * + * \return Boolean true if the bus is currently suspended, false otherwise. + */ + static inline bool USB_Host_IsBusSuspended(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsBusSuspended(void) + { + return ((UHCON & (1 << SOFEN)) ? false : true); + } + + /** Determines if the attached device is currently enumerated in Full Speed mode (12Mb/s), or + * false if the attached device is enumerated in Low Speed mode (1.5Mb/s). + * + * \return Boolean true if the attached device is enumerated in Full Speed mode, false otherwise. + */ + static inline bool USB_Host_IsDeviceFullSpeed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsDeviceFullSpeed(void) + { + return ((USBSTA & (1 << SPEED)) ? true : false); + } + + /** Determines if the attached device is currently issuing a Remote Wakeup request, requesting + * that the host resume the USB bus and wake up the device, false otherwise. + * + * \return Boolean true if the attached device has sent a Remote Wakeup request, false otherwise. + */ + static inline bool USB_Host_IsRemoteWakeupSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsRemoteWakeupSent(void) + { + return ((UHINT & (1 << RXRSMI)) ? true : false); + } + + /** Clears the flag indicating that a Remote Wakeup request has been issued by an attached device. */ + static inline void USB_Host_ClearRemoteWakeupSent(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_ClearRemoteWakeupSent(void) + { + UHINT &= ~(1 << RXRSMI); + } + + /** Accepts a Remote Wakeup request from an attached device. This must be issued in response to + * a device's Remote Wakeup request within 2ms for the request to be accepted and the bus to + * be resumed. + */ + static inline void USB_Host_ResumeFromWakeupRequest(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_ResumeFromWakeupRequest(void) + { + UHCON |= (1 << RESUME); + } + + /** Determines if a resume from Remote Wakeup request is currently being sent to an attached + * device. + * + * \return Boolean true if no resume request is currently being sent, false otherwise. + */ + static inline bool USB_Host_IsResumeFromWakeupRequestSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_Host_IsResumeFromWakeupRequestSent(void) + { + return ((UHCON & (1 << RESUME)) ? false : true); + } + + /* Function Prototypes: */ + /** Convenience function. This routine sends a SetConfiguration standard request to the attached + * device, with the given configuration index. This can be used to easily set the device + * configuration without creating and sending the request manually. + * + * \note After this routine returns, the control pipe will be selected. + * + * \param[in] ConfigNumber Configuration index to send to the device. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_SetDeviceConfiguration(const uint8_t ConfigNumber); + + /** Convenience function. This routine sends a GetDescriptor standard request to the attached + * device, requesting the device descriptor. This can be used to easily retrieve information + * about the device such as its VID, PID and power requirements. + * + * \note After this routine returns, the control pipe will be selected. + * + * \param[out] DeviceDescriptorPtr Pointer to the destination device descriptor structure where + * the read data is to be stored. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_GetDeviceDescriptor(void* const DeviceDescriptorPtr); + + /** Convenience function. This routine sends a GetDescriptor standard request to the attached + * device, requesting the string descriptor of the specified index. This can be used to easily + * retrieve string descriptors from the device by index, after the index is obtained from the + * Device or Configuration descriptors. + * + * \note After this routine returns, the control pipe will be selected. + * + * \param[in] Index Index of the string index to retrieve. + * \param[out] Buffer Pointer to the destination buffer where the retrieved string descriptor is + * to be stored. + * \param[in] BufferLength Maximum size of the string descriptor which can be stored into the buffer. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_GetDeviceStringDescriptor(const uint8_t Index, + void* const Buffer, + const uint8_t BufferLength); + + /** Clears a stall condition on the given pipe, via a ClearFeature request to the attached device. + * + * \note After this routine returns, the control pipe will be selected. + * + * \param[in] EndpointIndex Index of the endpoint to clear, including the endpoint's direction. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result. + */ + uint8_t USB_Host_ClearPipeStall(const uint8_t EndpointIndex); + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + static inline void USB_Host_HostMode_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_HostMode_On(void) + { + USBCON |= (1 << HOST); + } + + static inline void USB_Host_HostMode_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_HostMode_Off(void) + { + USBCON &= ~(1 << HOST); + } + + static inline void USB_Host_VBUS_Auto_Enable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Auto_Enable(void) + { + OTGCON &= ~(1 << VBUSHWC); + UHWCON |= (1 << UVCONE); + } + + static inline void USB_Host_VBUS_Manual_Enable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Manual_Enable(void) + { + OTGCON |= (1 << VBUSHWC); + UHWCON &= ~(1 << UVCONE); + + DDRE |= (1 << 7); + } + + static inline void USB_Host_VBUS_Auto_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Auto_On(void) + { + OTGCON |= (1 << VBUSREQ); + } + + static inline void USB_Host_VBUS_Manual_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Manual_On(void) + { + PORTE |= (1 << 7); + } + + static inline void USB_Host_VBUS_Auto_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Auto_Off(void) + { + OTGCON |= (1 << VBUSRQC); + } + + static inline void USB_Host_VBUS_Manual_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_Host_VBUS_Manual_Off(void) + { + PORTE &= ~(1 << 7); + } + + static inline void USB_Host_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void USB_Host_SetDeviceAddress(const uint8_t Address) + { + UHADDR = (Address & 0x7F); + } + + /* Enums: */ + enum USB_Host_WaitMSErrorCodes_t + { + HOST_WAITERROR_Successful = 0, + HOST_WAITERROR_DeviceDisconnect = 1, + HOST_WAITERROR_PipeError = 2, + HOST_WAITERROR_SetupStalled = 3, + }; + + /* Function Prototypes: */ + void USB_Host_ProcessNextHostState(void); + uint8_t USB_Host_WaitMS(uint8_t MS); + + #if defined(__INCLUDE_FROM_HOST_C) + static void USB_Host_ResetDevice(void); + #endif + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + -- cgit v1.2.3