From 0c0436f47c296513dace43d3ba20e3cc36f8f527 Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Sun, 25 Mar 2012 17:46:26 +0200 Subject: Board, rev A. --- firmware/LUFA/Drivers/USB/LowLevel/USBController.h | 471 +++++++++++++++++++++ 1 file changed, 471 insertions(+) create mode 100644 firmware/LUFA/Drivers/USB/LowLevel/USBController.h (limited to 'firmware/LUFA/Drivers/USB/LowLevel/USBController.h') diff --git a/firmware/LUFA/Drivers/USB/LowLevel/USBController.h b/firmware/LUFA/Drivers/USB/LowLevel/USBController.h new file mode 100644 index 0000000..3ac73aa --- /dev/null +++ b/firmware/LUFA/Drivers/USB/LowLevel/USBController.h @@ -0,0 +1,471 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief USB low level USB controller definitions. + * + * This file contains structures, function prototypes and macros related to the low level configuration of the + * USB controller, to start, stop and reset the USB library core. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +/** \ingroup Group_USB + * @defgroup Group_USBManagement USB Interface Management + * + * Functions, macros, variables, enums and types related to the setup and management of the USB interface. + * + * @{ + */ + +#ifndef __USBCONTROLLER_H__ +#define __USBCONTROLLER_H__ + + /* Includes: */ + #include + #include + #include + + #include "../HighLevel/USBMode.h" + + #include "../../../Common/Common.h" + #include "../HighLevel/USBMode.h" + #include "../HighLevel/Events.h" + #include "../HighLevel/USBTask.h" + #include "USBInterrupt.h" + + #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__) + #include "Host.h" + #include "OTG.h" + #include "Pipe.h" + #include "../HighLevel/HostStandardReq.h" + #include "../HighLevel/PipeStream.h" + #endif + + #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__) + #include "Device.h" + #include "Endpoint.h" + #include "../HighLevel/DeviceStandardReq.h" + #include "../HighLevel/EndpointStream.h" + #endif + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks and Defines: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + #if !defined(F_CLOCK) + #error F_CLOCK is not defined. You must define F_CLOCK to the frequency of the unprescaled input clock in your project makefile. + #endif + + #if (F_CLOCK == 8000000) + #if (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__) || \ + defined(__AVR_ATmega8U2__) || defined(__AVR_ATmega16U2__) || \ + defined(__AVR_ATmega32U2__)) + #define USB_PLL_PSC 0 + #elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) + #define USB_PLL_PSC 0 + #elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) || defined(__AVR_ATmega32U6__)) + #define USB_PLL_PSC ((1 << PLLP1) | (1 << PLLP0)) + #elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__)) + #define USB_PLL_PSC ((1 << PLLP1) | (1 << PLLP0)) + #endif + #elif (F_CLOCK == 16000000) + #if (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__) || \ + defined(__AVR_ATmega8U2__) || defined(__AVR_ATmega16U2__) || \ + defined(__AVR_ATmega32U2__)) + #define USB_PLL_PSC (1 << PLLP0) + #elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) + #define USB_PLL_PSC (1 << PINDIV) + #elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_ATmega32U6__)) + #define USB_PLL_PSC ((1 << PLLP2) | (1 << PLLP1)) + #elif (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)) + #define USB_PLL_PSC ((1 << PLLP2) | (1 << PLLP0)) + #endif + #endif + + #if !defined(USB_PLL_PSC) + #error No PLL prescale value available for chosen F_CLOCK value and AVR model. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** \name USB Controller Option Masks */ + //@{ + /** Regulator disable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad + * regulator should be enabled to regulate the data pin voltages to within the USB standard. + * + * \note See USB AVR data sheet for more information on the internal pad regulator. + */ + #define USB_OPT_REG_DISABLED (1 << 1) + + /** Regulator enable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad + * regulator should be disabled and the AVR's VCC level used for the data pads. + * + * \note See USB AVR data sheet for more information on the internal pad regulator. + */ + #define USB_OPT_REG_ENABLED (0 << 1) + + /** Manual PLL control option mask for \ref USB_Init(). This indicates to the library that the user application + * will take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock + * that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations. + */ + #define USB_OPT_MANUAL_PLL (1 << 2) + + /** Automatic PLL control option mask for \ref USB_Init(). This indicates to the library that the library should + * take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock + * that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations. + */ + #define USB_OPT_AUTO_PLL (0 << 2) + //@} + + /** \name Endpoint/Pipe Type Masks */ + //@{ + /** Mask for a CONTROL type endpoint or pipe. + * + * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions. + */ + #define EP_TYPE_CONTROL 0x00 + + /** Mask for an ISOCHRONOUS type endpoint or pipe. + * + * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions. + */ + #define EP_TYPE_ISOCHRONOUS 0x01 + + /** Mask for a BULK type endpoint or pipe. + * + * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions. + */ + #define EP_TYPE_BULK 0x02 + + /** Mask for an INTERRUPT type endpoint or pipe. + * + * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions. + */ + #define EP_TYPE_INTERRUPT 0x03 + //@} + + #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__) + /** Constant for the maximum software timeout period of the USB data stream transfer functions + * (both control and standard) when in either device or host mode. If the next packet of a stream + * is not received or acknowledged within this time period, the stream function will fail. + * + * This value may be overridden in the user project makefile as the value of the + * \ref USB_STREAM_TIMEOUT_MS token, and passed to the compiler using the -D switch. + */ + #define USB_STREAM_TIMEOUT_MS 100 + #endif + + /* Inline Functions: */ + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__) + /** Returns boolean true if the VBUS line is currently high (i.e. the USB host is supplying power), + * otherwise returns false. + * + * \note This function is not available on some AVR models which do not support hardware VBUS monitoring. + */ + static inline bool USB_VBUS_GetStatus(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_VBUS_GetStatus(void) + { + return ((USBSTA & (1 << VBUS)) ? true : false); + } + #endif + + /** Detaches the device from the USB bus. This has the effect of removing the device from any + * attached host, ceasing USB communications. If no host is present, this prevents any host from + * enumerating the device once attached until \ref USB_Attach() is called. + */ + static inline void USB_Detach(void) ATTR_ALWAYS_INLINE; + static inline void USB_Detach(void) + { + UDCON |= (1 << DETACH); + } + + /** Attaches the device to the USB bus. This announces the device's presence to any attached + * USB host, starting the enumeration process. If no host is present, attaching the device + * will allow for enumeration once a host is connected to the device. + * + * This is inexplicably also required for proper operation while in host mode, to enable the + * attachment of a device to the host. This is despite the bit being located in the device-mode + * register and despite the datasheet making no mention of its requirement in host mode. + */ + static inline void USB_Attach(void) ATTR_ALWAYS_INLINE; + static inline void USB_Attach(void) + { + UDCON &= ~(1 << DETACH); + } + + /* Function Prototypes: */ + /** Main function to initialize and start the USB interface. Once active, the USB interface will + * allow for device connection to a host when in device mode, or for device enumeration while in + * host mode. + * + * As the USB library relies on interrupts for the device and host mode enumeration processes, + * the user must enable global interrupts before or shortly after this function is called. In + * device mode, interrupts must be enabled within 500ms of this function being called to ensure + * that the host does not time out whilst enumerating the device. In host mode, interrupts may be + * enabled at the application's leisure however enumeration will not begin of an attached device + * until after this has occurred. + * + * Calling this function when the USB interface is already initialized will cause a complete USB + * interface reset and re-enumeration. + * + * \param[in] Mode This is a mask indicating what mode the USB interface is to be initialized to, a value + * from the \ref USB_Modes_t enum. + * + * \param[in] Options Mask indicating the options which should be used when initializing the USB + * interface to control the USB interface's behaviour. This should be comprised of + * a USB_OPT_REG_* mask to control the regulator, a USB_OPT_*_PLL mask to control the + * PLL, and a USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device + * mode speed. + * + * \note To reduce the FLASH requirements of the library if only device or host mode is required, + * the mode can be statically set in the project makefile by defining the token USB_DEVICE_ONLY + * (for device mode) or USB_HOST_ONLY (for host mode), passing the token to the compiler + * via the -D switch. If the mode is statically set, this parameter does not exist in the + * function prototype. + * \n\n + * + * \note To reduce the FLASH requirements of the library if only fixed settings are are required, + * the options may be set statically in the same manner as the mode (see the Mode parameter of + * this function). To statically set the USB options, pass in the USE_STATIC_OPTIONS token, + * defined to the appropriate options masks. When the options are statically set, this + * parameter does not exist in the function prototype. + * \n\n + * + * \note The mode parameter does not exist on devices where only one mode is possible, such as USB + * AVR models which only implement the USB device mode in hardware. + * + * \see Device.h for the USB_DEVICE_OPT_* masks. + */ + void USB_Init( + #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__) + const uint8_t Mode + #endif + + #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) || defined(__DOXYGEN__) + , + #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS)) + void + #endif + + #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__) + const uint8_t Options + #endif + ); + + /** Shuts down the USB interface. This turns off the USB interface after deallocating all USB FIFO + * memory, endpoints and pipes. When turned off, no USB functionality can be used until the interface + * is restarted with the \ref USB_Init() function. + */ + void USB_ShutDown(void); + + /** Resets the interface, when already initialized. This will re-enumerate the device if already connected + * to a host, or re-enumerate an already attached device when in host mode. + */ + void USB_ResetInterface(void); + + /* Global Variables: */ + #if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY)) || defined(__DOXYGEN__) + /** Indicates the mode that the USB interface is currently initialized to, a value from the + * \ref USB_Modes_t enum. + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value. + * \n\n + * + * \note When the controller is initialized into UID autodetection mode, this variable will hold the + * currently selected USB mode (i.e. \ref USB_MODE_Device or \ref USB_MODE_Host). If the controller + * is fixed into a specific mode (either through the USB_DEVICE_ONLY or USB_HOST_ONLY compile time + * options, or a limitation of the USB controller in the chosen device model) this will evaluate to + * a constant of the appropriate value and will never evaluate to \ref USB_MODE_None even when the + * USB interface is not initialized. + */ + extern volatile uint8_t USB_CurrentMode; + #elif defined(USB_HOST_ONLY) + #define USB_CurrentMode USB_MODE_Host + #elif defined(USB_DEVICE_ONLY) + #define USB_CurrentMode USB_MODE_Device + #endif + + #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__) + /** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init() + * was called. This value will be one of the USB_MODE_* masks defined elsewhere in this module. + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value. + */ + extern volatile uint8_t USB_Options; + #elif defined(USE_STATIC_OPTIONS) + #define USB_Options USE_STATIC_OPTIONS + #endif + + /* Enums: */ + /** Enum for the possible USB controller modes, for initialization via \ref USB_Init() and indication back to the + * user application via \ref USB_CurrentMode. + */ + enum USB_Modes_t + { + USB_MODE_None = 0, /**< Indicates that the controller is currently not initialized in any specific USB mode. */ + USB_MODE_Device = 1, /**< Indicates that the controller is currently initialized in USB Device mode. */ + USB_MODE_Host = 2, /**< Indicates that the controller is currently initialized in USB Host mode. */ + USB_MODE_UID = 3, /**< Indicates that the controller should determine the USB mode from the UID pin of the + * USB connector. + */ + }; + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_USB_CONTROLLER_C) + #if defined(USB_CAN_BE_DEVICE) + static void USB_Init_Device(void); + #endif + + #if defined(USB_CAN_BE_HOST) + static void USB_Init_Host(void); + #endif + #endif + + /* Inline Functions: */ + static inline void USB_PLL_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_PLL_On(void) + { + PLLCSR = USB_PLL_PSC; + PLLCSR |= (1 << PLLE); + } + + static inline void USB_PLL_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_PLL_Off(void) + { + PLLCSR = 0; + } + + static inline bool USB_PLL_IsReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool USB_PLL_IsReady(void) + { + return ((PLLCSR & (1 << PLOCK)) ? true : false); + } + + static inline void USB_REG_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_REG_On(void) + { + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + UHWCON |= (1 << UVREGE); + #else + REGCR &= ~(1 << REGDIS); + #endif + } + + static inline void USB_REG_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_REG_Off(void) + { + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + UHWCON &= ~(1 << UVREGE); + #else + REGCR |= (1 << REGDIS); + #endif + } + + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + static inline void USB_OTGPAD_On(void) ATTR_ALWAYS_INLINE; + static inline void USB_OTGPAD_On(void) + { + USBCON |= (1 << OTGPADE); + } + + static inline void USB_OTGPAD_Off(void) ATTR_ALWAYS_INLINE; + static inline void USB_OTGPAD_Off(void) + { + USBCON &= ~(1 << OTGPADE); + } + #endif + + static inline void USB_CLK_Freeze(void) ATTR_ALWAYS_INLINE; + static inline void USB_CLK_Freeze(void) + { + USBCON |= (1 << FRZCLK); + } + + static inline void USB_CLK_Unfreeze(void) ATTR_ALWAYS_INLINE; + static inline void USB_CLK_Unfreeze(void) + { + USBCON &= ~(1 << FRZCLK); + } + + static inline void USB_Controller_Enable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Enable(void) + { + USBCON |= (1 << USBE); + } + + static inline void USB_Controller_Disable(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Disable(void) + { + USBCON &= ~(1 << USBE); + } + + static inline void USB_Controller_Reset(void) ATTR_ALWAYS_INLINE; + static inline void USB_Controller_Reset(void) + { + const uint8_t Temp = USBCON; + + USBCON = (Temp & ~(1 << USBE)); + USBCON = (Temp | (1 << USBE)); + } + + #if defined(USB_CAN_BE_BOTH) + static inline uint8_t USB_GetUSBModeFromUID(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t USB_GetUSBModeFromUID(void) + { + if (USBSTA & (1 << ID)) + return USB_MODE_Device; + else + return USB_MODE_Host; + } + #endif + + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + -- cgit v1.2.3