From 0c0436f47c296513dace43d3ba20e3cc36f8f527 Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Sun, 25 Mar 2012 17:46:26 +0200 Subject: Board, rev A. --- firmware/LUFA/Scheduler/Scheduler.h | 313 ++++++++++++++++++++++++++++++++++++ 1 file changed, 313 insertions(+) create mode 100644 firmware/LUFA/Scheduler/Scheduler.h (limited to 'firmware/LUFA/Scheduler/Scheduler.h') diff --git a/firmware/LUFA/Scheduler/Scheduler.h b/firmware/LUFA/Scheduler/Scheduler.h new file mode 100644 index 0000000..a6f8ddd --- /dev/null +++ b/firmware/LUFA/Scheduler/Scheduler.h @@ -0,0 +1,313 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Simple round-robbin pseudo-task scheduler. + * + * Simple round-robbin cooperative scheduler for use in basic projects where non real-time tasks need + * to be executed. Each task is executed in sequence, and can be enabled or disabled individually or as a group. + * + * \deprecated This module is deprecated and will be removed in a future library release. + */ + +/** @defgroup Group_Scheduler Simple Task Scheduler - LUFA/Scheduler/Scheduler.h + * + * \deprecated This module is deprecated and will be removed in a future library release. + * + * \section Sec_Dependencies Module Source Dependencies + * The following files must be built with any user project that uses this module: + * - LUFA/Scheduler/Scheduler.c (Makefile source module name: LUFA_SRC_SCHEDULER) + * + * \section Module Description + * Simple round-robbin cooperative scheduler for use in basic projects where non real-time tasks need + * to be executed. Each task is executed in sequence, and can be enabled or disabled individually or as a group. + * + * For a task to yield it must return, thus each task should have persistent data marked with the static attribute. + * + * Each LUFA scheduler task should be written similar to an ISR; it should execute quickly (so that no one task + * hogs the processor, preventing another from running before some sort of timeout is exceeded). Unlike normal RTOS + * tasks, each LUFA scheduler task is a regular function, and thus must be designed to be called, and designed to + * return to the calling scheduler function repeatedly. Data which must be preserved between task calls should be + * declared as global or (preferably) as a static local variable inside the task. + * + * The scheduler consists of a task list, listing all the tasks which can be executed by the scheduler. Once started, + * each task is then called one after another, unless the task is stopped by another running task or interrupt. + * + * Usage Example: + * \code + * #include + * + * TASK(MyTask1); // Task prototype + * TASK(MyTask2); // Task prototype + * + * TASK_LIST + * { + * { .Task = MyTask1, .TaskStatus = TASK_RUN, .GroupID = 1 }, + * { .Task = MyTask2, .TaskStatus = TASK_RUN, .GroupID = 1 }, + * } + * + * int main(void) + * { + * Scheduler_Init(); + * + * // Other initialisation here + * + * Scheduler_Start(); + * } + * + * TASK(MyTask1) + * { + * // Task implementation here + * } + * + * TASK(MyTask2) + * { + * // Task implementation here + * } + * \endcode + * + * If desired, the LUFA scheduler does not need to be used in a LUFA powered application. A more conventional + * approach to application design can be used, or a proper scheduling RTOS inserted in the place of the LUFA scheduler. + * In the case of the former the USB task must be run manually repeatedly to maintain USB communications, and in the + * case of the latter a proper RTOS task must be set up to do the same. + * + * @{ + */ + +#ifndef __SCHEDULER_H__ +#define __SCHEDULER_H__ + + /* Includes: */ + #include + #include + + #include + + #include "../Common/Common.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Creates a new scheduler task body or prototype. Should be used in the form: + * \code + * TASK(TaskName); // Prototype + * + * TASK(TaskName) + * { + * // Task body + * } + * \endcode + */ + #define TASK(name) void name (void) + + /** Defines a task list array, containing one or more task entries of the type TaskEntry_t. Each task list + * should be encased in curly braces and ended with a comma. + * + * Usage Example: + * \code + * TASK_LIST + * { + * { .Task = MyTask1, .TaskStatus = TASK_RUN, .GroupID = 1 }, + * // More task entries here + * } + * \endcode + */ + #define TASK_LIST TaskEntry_t Scheduler_TaskList[] = + + /** Constant, giving the maximum delay in scheduler ticks which can be stored in a variable of type + * \ref SchedulerDelayCounter_t. + */ + #define TASK_MAX_DELAY (MAX_DELAYCTR_COUNT - 1) + + /** Task status mode constant, for passing to \ref Scheduler_SetTaskMode() or \ref Scheduler_SetGroupTaskMode(). */ + #define TASK_RUN true + + /** Task status mode constant, for passing to \ref Scheduler_SetTaskMode() or \ref Scheduler_SetGroupTaskMode(). */ + #define TASK_STOP false + + /* Pseudo-Function Macros: */ + #if defined(__DOXYGEN__) + /** Starts the scheduler in its infinite loop, executing running tasks. This should be placed at the end + * of the user application's main() function, as it can never return to the calling function. + */ + void Scheduler_Start(void); + + /** Initialises the scheduler so that the scheduler functions can be called before the scheduler itself + * is started. This must be executed before any scheduler function calls other than Scheduler_Start(), + * and can be omitted if no such functions could be called before the scheduler is started. + */ + void Scheduler_Init(void); + #else + #define Scheduler_Start() Scheduler_GoSchedule(TOTAL_TASKS); + #define Scheduler_Init() Scheduler_InitScheduler(TOTAL_TASKS); + #endif + + /* Type Defines: */ + /** Type define for a pointer to a scheduler task. */ + typedef void (*TaskPtr_t)(void); + + /** Type define for a variable which can hold a tick delay value for the scheduler up to the maximum delay + * possible. + */ + typedef uint16_t SchedulerDelayCounter_t; + + /** \brief Scheduler Task List Entry Structure. + * + * Structure for holding a single task's information in the scheduler task list. + */ + typedef struct + { + TaskPtr_t Task; /**< Pointer to the task to execute. */ + bool TaskStatus; /**< Status of the task (either TASK_RUN or TASK_STOP). */ + uint8_t GroupID; /**< Group ID of the task so that its status can be changed as a group. */ + } TaskEntry_t; + + /* Global Variables: */ + /** Task entry list, containing the scheduler tasks, task statuses and group IDs. Each entry is of type + * TaskEntry_t and can be manipulated as desired, although it is preferential that the proper Scheduler + * functions should be used instead of direct manipulation. + */ + exter TaskEntry_t Scheduler_TaskList[]; + + /** Contains the total number of tasks in the task list, irrespective of if the task's status is set to + * \ref TASK_RUN or \ref TASK_STOP. + * + * \note This value should be treated as read-only, and never altered in user-code. + */ + extern volatile uint8_t Scheduler_TotalTasks; + + /** Contains the current scheduler tick count, for use with the delay functions. If the delay functions + * are used in the user code, this should be incremented each tick period so that the delays can be + * calculated. + */ + extern volatile SchedulerDelayCounter_t Scheduler_TickCounter; + + /* Inline Functions: */ + /** Resets the delay counter value to the current tick count. This should be called to reset the period + * for a delay in a task which is dependant on the current tick value. + * + * \param[out] DelayCounter Counter which is storing the starting tick count for a given delay. + */ + static inline void Scheduler_ResetDelay(SchedulerDelayCounter_t* const DelayCounter) + ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE; + static inline void Scheduler_ResetDelay(SchedulerDelayCounter_t* const DelayCounter) + { + ATOMIC_BLOCK(ATOMIC_RESTORESTATE) + { + *DelayCounter = Scheduler_TickCounter; + } + } + + /* Function Prototypes: */ + /** Determines if the given tick delay has elapsed, based on the given delay period and tick counter value. + * + * \param[in] Delay The delay to test for, measured in ticks. + * \param[in] DelayCounter The counter which is storing the starting tick value for the delay. + * + * \return Boolean true if the delay has elapsed, false otherwise. + * + * Usage Example: + * \code + * static SchedulerDelayCounter_t DelayCounter = 10000; // Force immediate run on start-up + * + * // Task runs every 10000 ticks, 10 seconds for this demo + * if (Scheduler_HasDelayElapsed(10000, &DelayCounter)) + * { + * // Code to execute after delay interval elapsed here + * } + * \endcode + */ + bool Scheduler_HasDelayElapsed(const uint16_t Delay, + SchedulerDelayCounter_t* const DelayCounter) + ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(2); + + /** Sets the task mode for a given task. + * + * \param[in] Task Name of the task whose status is to be changed. + * \param[in] TaskStatus New task status for the task (\ref TASK_RUN or \ref TASK_STOP). + */ + void Scheduler_SetTaskMode(const TaskPtr_t Task, + const bool TaskStatus); + + /** Sets the task mode for a given task group ID, allowing for an entire group of tasks to have their + * statuses changed at once. + * + * \param[in] GroupID Value of the task group ID whose status is to be changed. + * \param[in] TaskStatus New task status for tasks in the specified group (\ref TASK_RUN or \ref TASK_STOP). + */ + void Scheduler_SetGroupTaskMode(const uint8_t GroupID, + const bool TaskStatus); + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #define TOTAL_TASKS (sizeof(Scheduler_TaskList) / sizeof(TaskEntry_t)) + #define MAX_DELAYCTR_COUNT 0xFFFF + + /* Inline Functions: */ + static inline void Scheduler_InitScheduler(const uint8_t TotalTasks) ATTR_ALWAYS_INLINE; + static inline void Scheduler_InitScheduler(const uint8_t TotalTasks) + { + Scheduler_TotalTasks = TotalTasks; + } + + static inline void Scheduler_GoSchedule(const uint8_t TotalTasks) ATTR_NO_RETURN ATTR_ALWAYS_INLINE ATTR_DEPRECATED; + static inline void Scheduler_GoSchedule(const uint8_t TotalTasks) + { + Scheduler_InitScheduler(TotalTasks); + + for (;;) + { + TaskEntry_t* CurrTask = &Scheduler_TaskList[0]; + + while (CurrTask != &Scheduler_TaskList[TotalTasks]) + { + if (CurrTask->TaskStatus == TASK_RUN) + CurrTask->Task(); + + CurrTask++; + } + } + } + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + -- cgit v1.2.3