From d0703775221dc25613f6b81cbe151b54db6cc66c Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Sun, 25 Mar 2012 17:46:26 +0200 Subject: Board, rev A. --- firmware/LUFA/Drivers/Misc/TerminalCodes.h | 224 +++++++++++++++++++++++++++++ 1 file changed, 224 insertions(+) create mode 100644 firmware/LUFA/Drivers/Misc/TerminalCodes.h (limited to 'firmware/LUFA/Drivers/Misc') diff --git a/firmware/LUFA/Drivers/Misc/TerminalCodes.h b/firmware/LUFA/Drivers/Misc/TerminalCodes.h new file mode 100644 index 0000000..f6673bc --- /dev/null +++ b/firmware/LUFA/Drivers/Misc/TerminalCodes.h @@ -0,0 +1,224 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief ANSI terminal special escape code macros. + * + * ANSI terminal compatible escape sequences. These escape sequences are designed to be concatenated with existing + * strings to modify their display on a compatible terminal application. + */ + +/** \ingroup Group_MiscDrivers + * @defgroup Group_Terminal ANSI Terminal Escape Codes - LUFA/Drivers/Misc/TerminalCodes.h + * + * \section Sec_Dependencies Module Source Dependencies + * The following files must be built with any user project that uses this module: + * - None + * + * \section Module Description + * Escape code macros for ANSI compliant text terminals. + * + * \note If desired, the macro DISABLE_TERMINAL_CODES can be defined in the project makefile and passed to the GCC + * compiler via the -D switch to disable the terminal codes without modifying the source, for use with non + * compatible terminals (any terminal codes then equate to empty strings). + * + * Example Usage: + * \code + * printf("Some String, " ESC_BOLD_ON " Some bold string"); + * \endcode + * + * @{ + */ + +#ifndef __TERMINALCODES_H__ +#define __TERMINALCODES_H__ + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + #if !defined(DISABLE_TERMINAL_CODES) + /** Creates an ANSI escape sequence with the specified payload. + * + * \param[in] EscapeSeq Payload to encode as an ANSI escape sequence, a ESC_* mask. + */ + #define ANSI_ESCAPE_SEQUENCE(EscapeSeq) "\33[" EscapeSeq + #else + #define ANSI_ESCAPE_SEQUENCE(EscapeSeq) + #endif + + /** \name Text Display Modifier Escape Sequences */ + //@{ + /** Turns on bold so that any following text is printed to the terminal in bold. */ + #define ESC_BOLD_ON ANSI_ESCAPE_SEQUENCE("1m") + + /** Turns on italics so that any following text is printed to the terminal in italics. */ + #define ESC_ITALICS_ON ANSI_ESCAPE_SEQUENCE("3m") + + /** Turns on underline so that any following text is printed to the terminal underlined. */ + #define ESC_UNDERLINE_ON ANSI_ESCAPE_SEQUENCE("4m") + + /** Turns on inverse so that any following text is printed to the terminal in inverted colours. */ + #define ESC_INVERSE_ON ANSI_ESCAPE_SEQUENCE("7m") + + /** Turns on strikethrough so that any following text is printed to the terminal with a line through the + * center. + */ + #define ESC_STRIKETHROUGH_ON ANSI_ESCAPE_SEQUENCE("9m") + + /** Turns off bold so that any following text is printed to the terminal in non bold. */ + #define ESC_BOLD_OFF ANSI_ESCAPE_SEQUENCE("22m") + + /** Turns off italics so that any following text is printed to the terminal in non italics. */ + #define ESC_ITALICS_OFF ANSI_ESCAPE_SEQUENCE("23m") + + /** Turns off underline so that any following text is printed to the terminal non underlined. */ + #define ESC_UNDERLINE_OFF ANSI_ESCAPE_SEQUENCE("24m") + + /** Turns off inverse so that any following text is printed to the terminal in non inverted colours. */ + #define ESC_INVERSE_OFF ANSI_ESCAPE_SEQUENCE("27m") + + /** Turns off strikethrough so that any following text is printed to the terminal without a line through + * the center. + */ + #define ESC_STRIKETHROUGH_OFF ANSI_ESCAPE_SEQUENCE("29m") + //@} + + /** \name Text Colour Control Sequences */ + //@{ + /** Sets the foreground (text) colour to black. */ + #define ESC_FG_BLACK ANSI_ESCAPE_SEQUENCE("30m") + + /** Sets the foreground (text) colour to red. */ + #define ESC_FG_RED ANSI_ESCAPE_SEQUENCE("31m") + + /** Sets the foreground (text) colour to green. */ + #define ESC_FG_GREEN ANSI_ESCAPE_SEQUENCE("32m") + + /** Sets the foreground (text) colour to yellow. */ + #define ESC_FG_YELLOW ANSI_ESCAPE_SEQUENCE("33m") + + /** Sets the foreground (text) colour to blue. */ + #define ESC_FG_BLUE ANSI_ESCAPE_SEQUENCE("34m") + + /** Sets the foreground (text) colour to magenta. */ + #define ESC_FG_MAGENTA ANSI_ESCAPE_SEQUENCE("35m") + + /** Sets the foreground (text) colour to cyan. */ + #define ESC_FG_CYAN ANSI_ESCAPE_SEQUENCE("36m") + + /** Sets the foreground (text) colour to white. */ + #define ESC_FG_WHITE ANSI_ESCAPE_SEQUENCE("37m") + + /** Sets the foreground (text) colour to the terminal's default. */ + #define ESC_FG_DEFAULT ANSI_ESCAPE_SEQUENCE("39m") + + /** Sets the text background colour to black. */ + #define ESC_BG_BLACK ANSI_ESCAPE_SEQUENCE("40m") + + /** Sets the text background colour to red. */ + #define ESC_BG_RED ANSI_ESCAPE_SEQUENCE("41m") + + /** Sets the text background colour to green. */ + #define ESC_BG_GREEN ANSI_ESCAPE_SEQUENCE("42m") + + /** Sets the text background colour to yellow. */ + #define ESC_BG_YELLOW ANSI_ESCAPE_SEQUENCE("43m") + + /** Sets the text background colour to blue. */ + #define ESC_BG_BLUE ANSI_ESCAPE_SEQUENCE("44m") + + /** Sets the text background colour to magenta. */ + #define ESC_BG_MAGENTA ANSI_ESCAPE_SEQUENCE("45m") + + /** Sets the text background colour to cyan. */ + #define ESC_BG_CYAN ANSI_ESCAPE_SEQUENCE("46m") + + /** Sets the text background colour to white. */ + #define ESC_BG_WHITE ANSI_ESCAPE_SEQUENCE("47m") + + /** Sets the text background colour to the terminal's default. */ + #define ESC_BG_DEFAULT ANSI_ESCAPE_SEQUENCE("49m") + //@} + + /** \name Cursor Positioning Control Sequences */ + //@{ + /** Saves the current cursor position so that it may be restored with \ref ESC_CURSOR_POS_RESTORE. */ + #define ESC_CURSOR_POS_SAVE ANSI_ESCAPE_SEQUENCE("s") + + /** Restores the cursor position to the last position saved with \ref ESC_CURSOR_POS_SAVE. */ + #define ESC_CURSOR_POS_RESTORE ANSI_ESCAPE_SEQUENCE("u") + + /** Sets the cursor position to the given line and column. + * + * \param[in] Line Line number to position the cursor at + * \param[in] Column Column number to position the cursor at + */ + #define ESC_CURSOR_POS(Line, Column) ANSI_ESCAPE_SEQUENCE(#Line ";" #Column "H") + + /** Moves the cursor up the given number of lines. + * + * \param[in] Lines Number of lines to move the cursor position + */ + #define ESC_CURSOR_UP(Lines) ANSI_ESCAPE_SEQUENCE(#Lines "A") + + /** Moves the cursor down the given number of lines. + * + * \param[in] Lines Number of lines to move the cursor position + */ + #define ESC_CURSOR_DOWN(Lines) ANSI_ESCAPE_SEQUENCE(#Lines "B") + + /** Moves the cursor to the right the given number of columns. + * + * \param[in] Columns Number of columns to move the cursor position + */ + #define ESC_CURSOR_FORWARD(Columns) ANSI_ESCAPE_SEQUENCE(#Columns "C") + + /** Moves the cursor to the left the given number of columns. + * + * \param[in] Columns Number of columns to move the cursor position + */ + #define ESC_CURSOR_BACKWARD(Columns) ANSI_ESCAPE_SEQUENCE(#Columns "D") + //@} + + /** \name Miscellaneous Control Sequences */ + //@{ + /** Resets any escape sequence modifiers back to their defaults. */ + #define ESC_RESET ANSI_ESCAPE_SEQUENCE("0m") + + /** Erases the entire display, returning the cursor to the top left. */ + #define ESC_ERASE_DISPLAY ANSI_ESCAPE_SEQUENCE("2J") + + /** Erases the current line, returning the cursor to the far left. */ + #define ESC_ERASE_LINE ANSI_ESCAPE_SEQUENCE("K") + //@} + +#endif + +/** @} */ + -- cgit v1.2.3