From d0703775221dc25613f6b81cbe151b54db6cc66c Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Sun, 25 Mar 2012 17:46:26 +0200 Subject: Board, rev A. --- firmware/LUFA/Drivers/USB/HighLevel/USBTask.h | 206 ++++++++++++++++++++++++++ 1 file changed, 206 insertions(+) create mode 100644 firmware/LUFA/Drivers/USB/HighLevel/USBTask.h (limited to 'firmware/LUFA/Drivers/USB/HighLevel/USBTask.h') diff --git a/firmware/LUFA/Drivers/USB/HighLevel/USBTask.h b/firmware/LUFA/Drivers/USB/HighLevel/USBTask.h new file mode 100644 index 0000000..651c6c4 --- /dev/null +++ b/firmware/LUFA/Drivers/USB/HighLevel/USBTask.h @@ -0,0 +1,206 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Main USB service task management. + * + * This file contains the function definitions required for the main USB service task, which must be called + * from the user application to ensure that the USB connection to or from a connected USB device is maintained. + * + * \note This file should not be included directly. It is automatically included as needed by the USB driver + * dispatch header located in LUFA/Drivers/USB/USB.h. + */ + +#ifndef __USBTASK_H__ +#define __USBTASK_H__ + + /* Includes: */ + #include + #include + #include + + #include "../LowLevel/USBController.h" + #include "Events.h" + #include "StdRequestType.h" + #include "StdDescriptors.h" + #include "USBMode.h" + + #if defined(USB_CAN_BE_DEVICE) + #include "DeviceStandardReq.h" + #endif + + #if defined(USB_CAN_BE_HOST) + #include "HostStandardReq.h" + #endif + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_USB_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Global Variables: */ + /** Indicates if the USB interface is currently initialized but not necessarily connected to a host + * or device (i.e. if \ref USB_Init() has been run). If this is false, all other library globals related + * to the USB driver are invalid. + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value. + * + * \ingroup Group_USBManagement + */ + extern volatile bool USB_IsInitialized; + + /** Structure containing the last received Control request when in Device mode (for use in user-applications + * inside of the \ref EVENT_USB_Device_ControlRequest() event, or for filling up with a control request to + * issue when in Host mode before calling \ref USB_Host_SendControlRequest(). + * + * \ingroup Group_USBManagement + */ + extern USB_Request_Header_t USB_ControlRequest; + + #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__) + #if !defined(HOST_STATE_AS_GPIOR) || defined(__DOXYGEN__) + /** Indicates the current host state machine state. When in host mode, this indicates the state + * via one of the values of the \ref USB_Host_States_t enum values. + * + * This value may be altered by the user application to implement the \ref HOST_STATE_Addressed, + * \ref HOST_STATE_Configured and \ref HOST_STATE_Suspended states which are not implemented by + * the library internally. + * + * To reduce program size and speed up checks of this global, it can be placed into one of the AVR's + * GPIOR hardware registers instead of RAM by defining the HOST_STATE_AS_GPIOR token to a value + * between 0 and 2 in the project makefile and passing it to the compiler via the -D switch. When + * defined, the corresponding GPIOR register should not be used in the user application except + * implicitly via the library APIs. + * + * \note This global is only present if the user application can be a USB host. + * + * \see \ref USB_Host_States_t for a list of possible device states. + * + * \ingroup Group_Host + */ + extern volatile uint8_t USB_HostState; + #else + #define _GET_HOST_GPIOR_NAME2(y) GPIOR ## y + #define _GET_HOST_GPIOR_NAME(x) _GET_HOST_GPIOR_NAME2(x) + #define USB_HostState _GET_HOST_GPIOR_NAME(HOST_STATE_AS_GPIOR) + #endif + #endif + + #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__) + #if !defined(DEVICE_STATE_AS_GPIOR) || defined(__DOXYGEN__) + /** Indicates the current device state machine state. When in device mode, this indicates the state + * via one of the values of the \ref USB_Device_States_t enum values. + * + * This value should not be altered by the user application as it is handled automatically by the + * library. The only exception to this rule is if the NO_LIMITED_CONTROLLER_CONNECT token is used + * (see \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events). + * + * To reduce program size and speed up checks of this global, it can be placed into one of the AVR's + * GPIOR hardware registers instead of RAM by defining the DEVICE_STATE_AS_GPIOR token to a value + * between 0 and 2 in the project makefile and passing it to the compiler via the -D switch. When + * defined, the corresponding GPIOR register should not be used in the user application except + * implicitly via the library APIs. + * + * \note This global is only present if the user application can be a USB device. + * \n\n + * + * \note This variable should be treated as read-only in the user application, and never manually + * changed in value except in the circumstances outlined above. + * + * \see \ref USB_Device_States_t for a list of possible device states. + * + * \ingroup Group_Device + */ + extern volatile uint8_t USB_DeviceState; + #else + #define _GET_DEVICE_GPIOR_NAME2(y) GPIOR ## y + #define _GET_DEVICE_GPIOR_NAME(x) _GET_DEVICE_GPIOR_NAME2(x) + #define USB_DeviceState _GET_DEVICE_GPIOR_NAME(DEVICE_STATE_AS_GPIOR) + #endif + #endif + + /* Function Prototypes: */ + /** This is the main USB management task. The USB driver requires this task to be executed + * continuously when the USB system is active (device attached in host mode, or attached to a host + * in device mode) in order to manage USB communications. This task may be executed inside an RTOS, + * fast timer ISR or the main user application loop. + * + * The USB task must be serviced within 30ms while in device mode, or within 1ms while in host mode. + * The task may be serviced at all times, or (for minimum CPU consumption): + * + * - In device mode, it may be disabled at start-up, enabled on the firing of the \ref EVENT_USB_Device_Connect() + * event and disabled again on the firing of the \ref EVENT_USB_Device_Disconnect() event. + * + * - In host mode, it may be disabled at start-up, enabled on the firing of the \ref EVENT_USB_Host_DeviceAttached() + * event and disabled again on the firing of the \ref EVENT_USB_Host_DeviceEnumerationComplete() or + * \ref EVENT_USB_Host_DeviceEnumerationFailed() events. + * + * If in device mode (only), the control endpoint can instead be managed via interrupts entirely by the library + * by defining the INTERRUPT_CONTROL_ENDPOINT token and passing it to the compiler via the -D switch. + * + * \see \ref Group_Events for more information on the USB events. + * + * \ingroup Group_USBManagement + */ + void USB_USBTask(void); + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_USBTASK_C) + #if defined(USB_CAN_BE_HOST) + static void USB_HostTask(void); + #endif + + #if defined(USB_CAN_BE_DEVICE) + static void USB_DeviceTask(void); + #endif + #endif + + /* Macros: */ + #define HOST_TASK_NONBLOCK_WAIT(Duration, NextState) MACROS{ USB_HostState = HOST_STATE_WaitForDevice; \ + WaitMSRemaining = (Duration); \ + PostWaitState = (NextState); }MACROE + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + -- cgit v1.2.3