From 237ea87c4fcb4865863fc15e07e179323caa7881 Mon Sep 17 00:00:00 2001 From: HÃ¥vard Espeland Date: Sat, 5 Feb 2011 19:26:39 +0100 Subject: Fork of LUFA CDC Bootloader Initial commit --- LUFA/ManPages/AboutLUFA.txt | 20 + LUFA/ManPages/AlternativeStacks.txt | 69 ++ LUFA/ManPages/Author.jpg | Bin 0 -> 28410 bytes LUFA/ManPages/BuildingLinkableLibraries.txt | 23 + LUFA/ManPages/ChangeLog.txt | 1099 +++++++++++++++++++++++++++ LUFA/ManPages/CompileTimeTokens.txt | 212 ++++++ LUFA/ManPages/CompilingApps.txt | 30 + LUFA/ManPages/ConfiguringApps.txt | 89 +++ LUFA/ManPages/DevelopingWithLUFA.txt | 21 + LUFA/ManPages/DeviceSupport.txt | 51 ++ LUFA/ManPages/DirectorySummaries.txt | 192 +++++ LUFA/ManPages/Donating.txt | 24 + LUFA/ManPages/FutureChanges.txt | 42 + LUFA/ManPages/GettingStarted.txt | 27 + LUFA/ManPages/Groups.txt | 21 + LUFA/ManPages/LUFA.png | Bin 0 -> 10296 bytes LUFA/ManPages/LUFAPoweredProjects.txt | 95 +++ LUFA/ManPages/LUFAvsAtmelStack.txt | 46 ++ LUFA/ManPages/LibraryApps.txt | 116 +++ LUFA/ManPages/LibraryResources.txt | 32 + LUFA/ManPages/LicenseInfo.txt | 22 + LUFA/ManPages/MainPage.txt | 48 ++ LUFA/ManPages/MigrationInformation.txt | 564 ++++++++++++++ LUFA/ManPages/ProgrammingApps.txt | 27 + LUFA/ManPages/SoftwareBootloaderJump.txt | 69 ++ LUFA/ManPages/VIDAndPIDValues.txt | 424 +++++++++++ LUFA/ManPages/WhyUseLUFA.txt | 46 ++ LUFA/ManPages/WritingBoardDrivers.txt | 27 + 28 files changed, 3436 insertions(+) create mode 100644 LUFA/ManPages/AboutLUFA.txt create mode 100644 LUFA/ManPages/AlternativeStacks.txt create mode 100644 LUFA/ManPages/Author.jpg create mode 100644 LUFA/ManPages/BuildingLinkableLibraries.txt create mode 100644 LUFA/ManPages/ChangeLog.txt create mode 100644 LUFA/ManPages/CompileTimeTokens.txt create mode 100644 LUFA/ManPages/CompilingApps.txt create mode 100644 LUFA/ManPages/ConfiguringApps.txt create mode 100644 LUFA/ManPages/DevelopingWithLUFA.txt create mode 100644 LUFA/ManPages/DeviceSupport.txt create mode 100644 LUFA/ManPages/DirectorySummaries.txt create mode 100644 LUFA/ManPages/Donating.txt create mode 100644 LUFA/ManPages/FutureChanges.txt create mode 100644 LUFA/ManPages/GettingStarted.txt create mode 100644 LUFA/ManPages/Groups.txt create mode 100644 LUFA/ManPages/LUFA.png create mode 100644 LUFA/ManPages/LUFAPoweredProjects.txt create mode 100644 LUFA/ManPages/LUFAvsAtmelStack.txt create mode 100644 LUFA/ManPages/LibraryApps.txt create mode 100644 LUFA/ManPages/LibraryResources.txt create mode 100644 LUFA/ManPages/LicenseInfo.txt create mode 100644 LUFA/ManPages/MainPage.txt create mode 100644 LUFA/ManPages/MigrationInformation.txt create mode 100644 LUFA/ManPages/ProgrammingApps.txt create mode 100644 LUFA/ManPages/SoftwareBootloaderJump.txt create mode 100644 LUFA/ManPages/VIDAndPIDValues.txt create mode 100644 LUFA/ManPages/WhyUseLUFA.txt create mode 100644 LUFA/ManPages/WritingBoardDrivers.txt (limited to 'LUFA/ManPages') diff --git a/LUFA/ManPages/AboutLUFA.txt b/LUFA/ManPages/AboutLUFA.txt new file mode 100644 index 0000000..697535c --- /dev/null +++ b/LUFA/ManPages/AboutLUFA.txt @@ -0,0 +1,20 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \page Page_AboutLUFA About LUFA + * + * This section of the manual contains information about the library as a whole, including its supported targets, + * past and planned changes, and links to other projects incorporating LUFA. + * + * Subsections: + * \li \subpage Page_DeviceSupport - Current Device and Hardware Support + * \li \subpage Page_Resources - LUFA and USB Related Resources + * \li \subpage Page_ChangeLog - Project Changelog + * \li \subpage Page_FutureChanges - Planned Changes to the Library + * \li \subpage Page_LUFAPoweredProjects - Other Projects Using LUFA + */ + diff --git a/LUFA/ManPages/AlternativeStacks.txt b/LUFA/ManPages/AlternativeStacks.txt new file mode 100644 index 0000000..889183c --- /dev/null +++ b/LUFA/ManPages/AlternativeStacks.txt @@ -0,0 +1,69 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \page Page_AlternativeStacks Alternative USB AVR Stacks + * + * LUFA is not the only stack available for the USB AVRs, although it is perhaps the best (see \ref Page_WhyUseLUFA). + * In the interests of completeness and user choice, other known USB AVR stacks are listed here. + * + * \section Sec_HardwareStacks Hardware USB AVR Stacks + * These are the known alternative USB stacks which are designed for and run exclusively on the USB AVR series microcontrollers, + * which contain on-chip USB controller hardware for maximum features and speed. + * + * - Name: Atmel USB AVR Stack (Atmel Inc.) \n + * Cost: Free \n + * License: Atmel Limited License (see Atmel download for details) \n + * Website: http://atmel.com/dyn/products/app_notes.asp?family_id=607#USB \n + * Description: This is the official Atmel USB AVR stack, for their 8-bit USB AVR lineup. Each series of + * USB AVR is separated into a separate download stack, which is both AVR-GCC and IAR compatible. + * + * - Name: Dr. Stefan Salewski's AT90USB1287 Stack (Dr. Stefan Salewski) \n + * Cost: Free \n + * License: GPL \n + * Website: http://www.ssalewski.de/AT90USB_firmware.html.en \n + * Description: This is a GPL'd library specifically designed for the AT90USB1287, by Dr. Stefan Salewski, a + * German Physicist. It compiles for AVR-GCC and can potentially be modified to work on other USB + * AVR models. + * + * - Name: FreakUSB Stack (FreakLabs) \n + * Cost: Free \n + * License: Modified BSD \n + * Website: http://freaklabs.org/index.php/FreakUSB-Open-Source-USB-Device-Stack.html \n + * Description: An open source simple USB stack for a selection of the USB AVRs. Contains a sample class driver + * for the CDC-ACM class, however other class driver implementations are also possible. + * + * - Name: PJRC Teensy Stack (Paul Stoffregen) \n + * Cost: Free \n + * License: BSD \n + * Website: http://www.pjrc.com/teensy/usb_debug_only.html \n + * Description: Not so much a complete stack as a collection of USB enabled demos, this library is specifically + * designed for the PJRC Teensy line of USB AVRs, and thus may need to be modified for other USB AVR + * chips. These minimal code samples shows the inner workings of the USB controller, without all the + * abstraction present in most other USB AVR stacks. + * + * \section Sec_SoftwareStacks Software AVR Stacks + * These are the known alternative USB stacks which can run on regular AVR models, lacking dedicated hardware USB controllers + * via a bit-banged (emulated) version of the USB protocol. They are limited in their capabilities due to the cycles required + * to be dedicated to managing the USB bus, but offer a cheap way to implement USB functionality into a design. + * + * - Name: AVR309: Software USB (Atmel) \n + * Cost: Free \n + * License: None Stated \n + * Website: http://www.atmel.com/dyn/Products/app_notes.asp?family_id=607 \n + * Description: Atmel's official software USB implementation, an Application Note containing work by Igor Cesko. This + * is a minimal assembly-only implementation of software USB, providing HID functionality. Less compile + * options than V-USB (see below). + * + * - Name: V-USB (Objective Development) \n + * Cost: Free for some uses, see website for licensing \n + * License: Dual GPL2/Custom \n + * Website: http://www.obdev.at/products/vusb/index.html \n + * Description: Well regarded and complete USB 1.1 software stack for several AVR models, implementing Low Speed HID. + * Used in many commercial and non-commercial designs, with user-submitted projects available for viewing + * on the company's website. Uses C language code mixed with assembly for time-critical sections. + */ + diff --git a/LUFA/ManPages/Author.jpg b/LUFA/ManPages/Author.jpg new file mode 100644 index 0000000..e8f5541 Binary files /dev/null and b/LUFA/ManPages/Author.jpg differ diff --git a/LUFA/ManPages/BuildingLinkableLibraries.txt b/LUFA/ManPages/BuildingLinkableLibraries.txt new file mode 100644 index 0000000..ff5fdc5 --- /dev/null +++ b/LUFA/ManPages/BuildingLinkableLibraries.txt @@ -0,0 +1,23 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_BuildLibrary Building as a Linkable Library + * + * The LUFA library can be built as a proper linkable library (with the extention .a) under AVR-GCC, so that + * the library does not need to be recompiled with each revision of a user project. Instructions for creating + * a library from a given source tree can be found in the AVR-GCC user manual included in the WinAVR install + * /Docs/ directory. + * + * However, building the library is not recommended, as the static (compile-time) options will be + * unable to be changed without a recompilation of the LUFA code. Therefore, if the library is to be built + * from the LUFA source, it should be made to be application-specific and compiled with the static options + * that are required for each project (which should be recorded along with the library). + * + * Normal library use has the library components compiled in at the same point as the application code, as + * demonstrated in the library demos and applications. This is the preferred method, as the library is recompiled + * each time to ensure that all static options for a particular application are applied. + */ + diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt new file mode 100644 index 0000000..1cd368d --- /dev/null +++ b/LUFA/ManPages/ChangeLog.txt @@ -0,0 +1,1099 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + + /** \page Page_ChangeLog Project Changelog + * + * \section Sec_ChangeLog101122 Version 101122 + * New: + * - Core: + * - Added new SCSI_ASENSE_NOT_READY_TO_READY_CHANGE constant to the Mass Storage class driver, to indicate when a previously + * not ready removable medium has now become ready for the host's use (thanks to Martin Degelsegger) + * - Moved the Pipe and Endpoint stream related code to two new USB library core source files EndpointStream.c and PipeStream.c + * - Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number + * - Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application + * handling of USB Start of Frame events while in USB Host mode + * - Added new PRNT_Host_BytesReceived(), PRNT_Host_ReceiveByte(), PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the + * Print Host Class driver + * - Added class specific descriptor alternative struct type defines with standard USB-IF element naming + * - Added new project makefile template to the library and moved board driver stub files into in a new "CodeTemplates" directory + * - Added board hardware driver support for the Adafruit U4 breakout board + * - Added board hardware driver support for the Arduino Uno development board + * - Added board hardware driver support for the Blackcat USB JTAG board (thanks to the PSGroove team) + * - Added board hardware driver support for the Busware BUI development board + * - Added board hardware driver support for the Busware CUL V3 868MHZ radio board (thanks to Dirk Tostmann) + * - Added board hardware driver support for the Kernel Concepts USBFOO development board + * - Added board hardware driver support for the Linnix UDIP development board + * - Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett) + * - Added board hardware driver support for the Maximus board (thanks to the PSGroove team) + * - Added board hardware driver support for the Microsin AVR-USB162 breakout board + * - Added board hardware driver support for the Minimus board (thanks to the PSGroove team) + * - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management + * tasks for each driver is called + * - Added standard keyboard HID report scancode defines (thanks to Laszlo Monda) + * - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions + * - Library Applications: + * - Added default test tone generation mode to the Device mode AudioInput demos + * - Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_WRITE_SUPPORT compile time options to the + * CDC class bootloader + * - Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light) + * + * Changed: + * - Core: + * - Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions + * depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing + * with basic code + * - Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove + * the need for extra casting inside the callback (thanks to Jonathan Kollasch) + * - Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode + * - Removed the EVENT_USB_InitFailure() event, not specifying a USB mode correctly now defaults to UID selection mode + * - Renamed and moved class driver common constant definitions to make the naming scheme more uniform + * - Moved the USB mode specifier constants into a new enum, so that they are semantically related to one another + * - Renamed ENDPOINT_DOUBLEBANK_SUPPORTED() to ENDPOINT_BANKS_SUPPORTED() and changed it to return the maximum number of supported banks for + * the given endpoint + * - Better algorithm to extract and convert the internal device serial number into a string descriptor (if present) + * - All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be seperately included + * - The MIDI class drivers now automatically flushes the MIDI interface when the MIDI class driver's USBTask() function is called + * - Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library + * request handlers, not afterwards + * - Library Applications: + * - Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints + * - Added missing DataflashManager_CheckDataflashOperation() function to the MassStorageKeyboard demo, removed redundant + * SCSI_Codes.h file as these values are part of the MassStorage Class Driver + * - Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel + * does not exist on these chips (thanks to Marco) + * - Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data + * transferred as quickly as possible without any processing inbetween sections, so that long callbacks or event handlers will + * not break communications with the host by exceeding the maximum control request stage timeout period + * - Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible + * to free up the Start of Frame flag for interrupt use in the user application + * - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany) + * - Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive + * - Changed configuration descriptor parser for all host mode projects and class drivers to ensure better compatibility with devices + * - All LowLevel demos changed to use the constants and types defined in the USB class drivers + * - Changed AudioInput and AudioOutput demos to reload the next sample via an interrupt rather than polling the sample timer + * - Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times + * - Changed ClassDriver MIDI demos to process all incomming events in a loop until the bank becomes empty rather than one at a time + * - Changed LowLevel MIDI demos to only clear the incomming event bank once it has become empty to support packed event packets + * + * Fixed: + * - Core: + * - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist + * within the supplied report of a multiple report HID device + * - Fixed critical pipe/endpoint memory allocation issue where the bank memory address space could be silently overlapped + * in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger) + * - Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev) + * - Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts + * - Fixed USB_Host_ClearPipeStall() incorrectly determining the endpoint direction from the currently selected pipe + * - Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode + * - Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests + * - Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target + * - Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver + * - Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set + * - Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called + * - Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings + * - Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured + * - Fixed MIDI class driver send routines silently discarding packets if the endpoint or pipe is busy (thanks to Robin Green) + * - Library Applications: + * - Fixed MassStorage based demos and projects resetting the SCSI sense values before the command is executed, leading to + * missed SCSI sense values when the host retrieves the sense key (thanks to Martin Degelsegger) + * - Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control + * request handler + * - Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value + * - Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2 + * - Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev) + * - Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used + * - Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules + * - Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full + * - Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor + * - Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics) + * - Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode + * + * \section Sec_ChangeLog100807 Version 100807 + * New: + * - Added new ADC_DisableChannel() function (thanks to Mich Davis) + * - Added new VTARGET_REF_VOLTS and VTARGET_SCALE_FACTOR compile time defines to the AVRISP-MKII programmer project to set + * the VTARGET reference voltage and scale factor + * - Added new pgm_read_ptr() macro to Common.h for reading of pointers out of flash memory space + * - Added new SWAPENDIAN_16() and SWAPENDIAN_32() macros to Common.h for statically initialized variables at compile time + * - Added new Drivers/USB/LowLevel/Device.c file to house Device mode specific functions that are more complicated than simple macros + * - Added new AVRStudio 4 project files for all library demos, projects and bootloaders + * - Added ability to set the serial baud rate via the user's terminal in the XPLAINBridge project + * - Added new LUFA module variables for the different source modules in the core library makefile to simplify project makefiles + * - Added start of a new Test and Measurement class demo (thanks to Peter Lawrence) + * - Added new SPI_ORDER_* data order masks to the SPI peripheral driver + * - Added support to the AVRISP-MKII project for ISP speeds slower than 125KHz via a new software SPI driver + * - Added support for the new button/LED on the latest model USBTINY-MKII + * + * Changed: + * - The RingBuff library code has been replaced in the XPLAINBridge, Benito and USBtoSerial projects with an ultra lightweight + * ring buffer to help improve the reliability of the projects + * - The EEPROM stream read/write functions now use eeprom_update_byte() instead of eeprom_write_byte(), so that only + * changed bytes are written to EEPROM to preserve its lifespan + * - Changed over the AVRISP-MKII and TemperatureDataLogger projects to use eeprom_update_byte() when writing non-volatile + * parameters to EEPROM to preserve its lifespan + * - Removed unused line encoding data and control requests from the CDC Bootloader code, to save space + * - Renamed SERIAL_STREAM_ASSERT() macro to STDOUT_ASSERT() + * - The USB_Device_IsRemoteWakeupSent() and USB_Device_IsUSBSuspended() macros have been deleted, as they are now obsolete + * - Rewrote the implementation of the SwapEndian_16() and SwapEndian_32() functions so that they compile down in most instances to + * minimal loads and stores rather than complicated shifts + * - The software UART in the XPLAINBridge has been largely altered to try to improve upon its performance and reliability + * - The USBtoSerial and Benito projects now flushes received data via a flush timer, so that several bytes can be transmitted at once + * - Removed the automated checking of event names in the demo, project and bootloader makefiles due to inconsistencies between the + * behaviour of the command line tools used to perform the check on each platform + * - Internal USB driver source files renamed and moved to ease future possible architecture ports + * - All internal pseudo-function macros have been converted to true inline functions for type-safety and readability + * - Changed LED indicator masks for the AVRISP-MKII project, so that there are defined roles for each LED + * - Altered the CDC Device and Host Class drivers' receive byte routines, so that no data is indicated by the function returning a + * negative value (thanks to Andreas Paulin) + * - Added auto flushing of OUT data to the CDC Host Class driver's USBTask function to automatically flush the send pipe buffer + * + * Fixed: + * - Fixed AVRISP project sending a LOAD EXTENDED ADDRESS command to 128KB AVRs after programming or reading from + * the last page of FLASH (thanks to Gerard Sexton) + * - Fixed AVRISP project not sending a full erase-and-write EEPROM command to XMEGA targets when writing to the EEPROM + * instead of the split write-only command (thanks to Tim Margush) + * - Fixed RNDISEthernet demos crashing when calculating checksums for Ethernet/TCP packets of more than ~500 bytes due to + * an overflow in the checksum calculation loop (thanks to Kevin Malec) + * - Fixed XPLAINBridge project not correctly reading the XMEGA's supply voltage when reporting back to the host + * - Fixed incorrect signature for the ATMEGA32U2 in the DFU bootloader (thanks to Axel Rohde) + * - Fixed internal device serial not being accessible on the ATMEGAXXU2 AVRs (thanks to Axel Rohde) + * - Fixed void pointer arithmetic in ConfigDescriptor.h breaking C++ compatibility (thanks to Michael Hennebry) + * - Fixed broken PDI EEPROM Section Erase functionality in the AVRISP-MKII project + * - Fixed USB_Device_SendRemoteWakeup() not working when the USB clock was frozen during USB bus suspend (thanks to Brian Dickman) + * - Fixed occasional lockup of the AVRISP project due to the timeout extension code incorrectly extending the timeout in + * PDI and TPI programming modes infinitely + * - Fixed HID device class driver still using PrevReportINBuffer for GetReport control requests even when it has been + * set to NULL by the user application (thanks to Axel Rohde) + * - Fixed MIDI_Device_SendEventPacket() not correctly waiting for the endpoint to become ready (thanks to Robin Green) + * - Fixed Benito and USBtoSerial projects not turning off the USART before reconfiguring it, which could cause incorrect + * operation to occur (thanks to Bob Paddock) + * - Fixed Serial peripheral driver not turning off the USART before reconfiguring it, which would cause incorrect operation + * to occur (thanks to Bob Paddock) + * - Fixed software application start command broken in the DFU class bootloader when dfu-programmer is used due to application + * start address corruption + * + * \section Sec_ChangeLog100513 Version 100513 + * New: + * - Added incomplete MIDIToneGenerator project + * - Added new Relay Controller Board project (thanks to OBinou) + * - Added board hardware driver support for the Teensy, USBTINY MKII, Benito and JM-DB-U2 lines of third party USB AVR boards + * - Added new ATTR_NO_INIT variable attribute for global variables that should not be automatically cleared on startup + * - Added new ENDPOINT_*_BusSuspended error code to the Endpoint function, so that the stream functions early-abort if the bus + * is suspended before or during a transfer + * - Added new EVENT_CDC_Device_BreakSent() event and CDC_Host_SendBreak() function to the Device and Host CDC Class drivers + * - Added ReportType parameter to the HID device class driver CALLBACK_HID_Device_ProcessHIDReport() function so that FEATURE + * reports from the host to the device can be correctly processed + * - Added ReportType parameter to the HID host class driver HID_Host_SendReportByID() function so that FEATURE reports can be + * issued to the attached device + * + * Changed: + * - AVRISP programmer project now has a more robust timeout system + * - Added a timeout value to the TWI_StartTransmission() function, within which the addressed device must respond + * - Webserver project now uses the board LEDs to indicate the current IP configuration state + * - Added ENABLE_TELNET_SERVER compile time option to the Webserver project to disable the TELNET server if desired + * - Increased throughput of the USBtoSerial demo on systems that send multiple bytes per packet (thanks to Opendous Inc.) + * - Double bank CDC endpoints in the XPLAIN Bridge project, re-enable JTAG once the mode selection pin has been sampled. + * - Standardized the naming scheme given to configuration descriptor sub-elements in the Device mode demos, bootloaders + * and projects + * - All Class Driver Host mode demos now correctly set the board LEDs to READY once the enumeration process has completed + * - Added LIBUSB_FILTERDRV_COMPAT compile time option to the AVRISP programmer project to make the code compatible with Windows + * builds of avrdude at the expense of AVRStudio compatibility + * - Removed two-step endpoint/pipe bank clear and switch sequence for smaller, faster endpoint/pipe code + * - The USB_Init() function no longer calls sei() - the user is now responsible for enabling interrupts when they are ready + * for them to be enabled (thanks to Andrei Krainev) + * - The Audio_Device_IsSampleReceived() and Audio_Device_IsReadyForNextSample() functions are now inline, to reduce overhead + * - Removed the cast to uint16_t on the set baud rate in the USBtoSerial project, so that the higher >1M baud rates can be + * selected (thanks to Steffan Woltjer) + * - Removed software PDI and TPI emulation from the AVRISP-MKII clone project as it was very buggy and slow - PDI and TPI must + * now be implemented via separate programming headers + * - The CDC class bootloader now uses a watchdog reset rather than a soft-reset when exited to ensure that all hardware is + * properly reset to their defaults + * - Device mode class driver callbacks are now fired before the control request status stage is sent to prevent the host from + * timing out if another request is immediately fired and the device has a lengthy callback routine + * - The TeensyHID bootloader has been removed, per request from Paul at PJRC + * - The LIBUSB_FILTERDRV_COMPAT compile time option in the XPLAINBridge and AVRISP-MKII projects has been renamed + * LIBUSB_DRIVER_COMPAT, as it applies to all software on all platforms using the libUSB driver + * + * Fixed: + * - Fixed possible device lockup when INTERRUPT_CONTROL_ENDPOINT is enabled and the control endpoint is not properly + * selected when the ISR completes + * - Fixed AVRISP-MKII clone project not correctly issuing LOAD EXTENDED ADDRESS commands when the extended address + * boundary is crossed during programming or read back (thanks to Gerard Sexton) + * - Fixed warnings when building the AVRISP-MKII clone project with the ENABLE_XPROG_PROTOCOL compile time option disabled + * - Fixed software PDI/TPI programming mode in the AVRISP project not correctly toggling just the clock pin + * - Fixed TWI_StartTransmission() corrupting the contents of the GPIOR0 register + * - Fixed TWI driver not aborting when faced with no response after attempting to address a device on the bus + * - Fixed ADC routines not correctly returning the last result when multiple channels were read + * - Fixed ADC routines failing to read the extended channels (Channels 8 to 13, Internal Temperature Sensor) on the + * U4 series USB AVR parts + * - Fixed LowLevel MassStorage demo broken on the U2 series USB AVRs due to unsupported double-banked endpoint modes used + * - Fixed compilation error in the AudioInput demos when MICROPHONE_BIASED_TO_HALF_RAIL is defined (thanks to C. Scott Ananian) + * - Fixed incorrect definition of HID_ALIGN_DATA() causing incorrect HID report item data alignment + * - Fixed Still Image Host class driver not resetting the transaction ID when a new session is opened, fixed driver not sending + * a valid session ID to the device + * - Removed invalid dfu and flip related targets from the bootloaders - bootloaders can only be replaced with an external programmer + * - Fixed Set/Clear Feature requests directed to a non-configured endpoint not returning a stall to the host + * - Fixed HID Device Class Driver not allocating a temporary buffer when the host requests a report via the control endpoint and the + * user has set the PrevReportINBuffer driver configuration element to NULL (thanks to Lars Noschinski) + * - Fixed device state not being reset to DEVICE_STATE_Default if the host sets a 0x00 device address + * - Fixed device not stalling configuration requests before the device's address has been set + * - Fixed possibility of internal signature retrieval being corrupted if an interrupt occurs during a signature byte + * read (thanks to Andrei Krainev) + * - Fixed device state not being reset back to the default state if the host sets the address to 0 + * - Fixed Set Configuration requests not being stalled until the host has set the device's address + * - Fixed Host mode HID class driver not sending the correct report type when HID_Host_SendReportByID() was called and the + * HID_HOST_BOOT_PROTOCOL_ONLY compile time option is set + * - Fixed INTERRUPT_CONTROL_ENDPOINT compile time option preventing other interrupts from occurring while the control endpoint + * request is being processed, causing possible lockups if a USB interrupt occurs during a transfer + * - Remove incorrect Abstract Call Management class specific descriptor from the CDC demos, bootloaders and projects + * + * \section Sec_ChangeLog100219 Version 100219 + * + * New: + * - Added TPI programming support for 6-pin ATTINY devices to the AVRISP programmer project (thanks to Tom Light) + * - Added command timeout counter to the AVRISP project so that the device no longer freezes when incorrectly connected + * to a target + * - Added new TemperatureDataLogger application, a USB data logger which writes to the device's dataflash and appears to + * the host as a standard Mass Storage device when inserted + * - Added MIDI event packing support to the MIDI Device and Host mode Class drivers, allowing for multiple MIDI events to + * sent or received in packed form in a single USB packet + * - Added new MIDI send buffer flush routines to the MIDI Device and Host mode Class drivers, to flush packed events + * - Added master mode hardware TWI driver for easy TWI peripheral control + * - Added ADC MUX masks for the standard ADC input channels on all AVR models with an ADC, altered demos to use these masks + * as on some models, the channel number is not identical to its single-ended ADC MUX mask + * - New Webserver project, a RNDIS host USB webserver using the open source uIP TCP/IP network stack and FatFS library + * - New BOARD value option BOARD_NONE (equivalent to not specifying BOARD) which will remove all board hardware drivers which + * do not adversely affect the code operation (currently only the LEDs driver) + * - Added keyboard modifier masks (HID_KEYBOARD_MODIFER_*) and LED report masks (KEYBOARD_LED_*) to the HID class driver and + * Keyboard demos + * - Added .5MHz recovery clock to the AVRISP programmer project when in ISP programming mode to correct mis-set fuses + * + * Changed: + * - Slowed down software USART carried PDI programming in the AVRISP project to prevent transmission errors + * - Renamed the AVRISP project folder to AVRISP-MKII to reduce confusion + * - Renamed the RESET_LINE_* makefile tokens in the AVRISP MKII Project to AUX_LINE_*, as they are not always used for target + * reset + * - Changed over the MassStorageKeyboard Class driver device demo to use Start of Frame events rather than a timer to keep track + * of elapsed milliseconds + * - Inlined currently unused (but standardized) maintenance functions in the Device and Host Class drivers to save space + * - The XPLAINBridge project now selects between a USB to Serial bridge and a PDI programmer on startup, reading the JTAG port's + * TDI pin to determine which mode to use + * - Removed the stream example code from the Low Level VirtualSerial demos, as they were buggy and only served to add clutter + * + * Fixed: + * - Fixed AVRISP project not able to enter programming mode when ISP protocol is used + * - Fixed AVRISP PDI race condition where the guard time between direction changes could be interpreted as a start bit + * - Fixed ADC_IsReadingComplete() returning an inverted result + * - Fixed blocking CDC streams not aborting when the host is disconnected + * - Fixed XPLAIN board Dataflash driver broken due to incorrect preprocessor commands + * - Fixed inverted XPLAIN LED driver output (LED turned on when it was supposed to be turned off, and vice-versa) + * - Fixed Class Driver struct interface numbers in the KeyboardMouse and VirtualSerialMouse demos (thanks to Renaud Cerrato) + * - Fixed invalid USB controller PLL prescaler values for the ATMEGAxxU2 controllers + * - Fixed lack of support for the ATMEGA32U2 in the DFU and CDC class bootloaders + * - Fixed Benito project not resetting the target AVR automatically when programming has completed + * - Fixed DFU bootloader programming not discarding the correct number of filler bytes from the host when non-aligned programming + * ranges are specified (thanks to Thomas Bleeker) + * - Fixed CDC and RNDIS host demos and class drivers - bidirectional endpoints should use two separate pipes, not one half-duplex pipe + * - Fixed Pipe_IsEndpointBound() not taking the endpoint's direction into account + * - Fixed EEPROM and FLASH ISP programming in the AVRISP project + * - Fixed incorrect values of USB_CONFIG_ATTR_SELFPOWERED and USB_CONFIG_ATTR_REMOTEWAKEUP tokens (thanks to Claus Christensen) + * - Fixed SerialStream driver blocking while waiting for characters to be received instead of returning EOF + * - Fixed SerialStream driver not setting stdin to the created serial stream (thanks to Mike Alexander) + * - Fixed USB_GetHIDReportSize() returning the number of bits in the specified report instead of bytes + * - Fixed AVRISP project not extending the command delay after each successful page/word/byte program + * - Fixed accuracy of the SERIAL_UBBRVAL() and SERIAL_2X_UBBRVAL() macros for higher baud rates (thanks to Renaud Cerrato) + * + * \section Sec_ChangeLog091223 Version 091223 + * + * New: + * - Added activity LED indicators to the AVRISP project to indicate when the device is busy processing a command + * - The USB target family and allowable USB mode tokens are now public and documented (USB_CAN_BE_*, USB_SERIES_*_AVR) + * - Added new XPLAIN USB to Serial Bridge project (thanks to John Steggall for initial proof-of-concept, David Prentice + * and Peter Danneger for revised software USART code) + * - Added new RNDIS Ethernet Host LowLevel demo + * - Added new RNDIS Ethernet Host Class Driver + * - Added new RNDIS Ethernet Host ClassDriver demo + * - Added CDC_Host_Flush() function to the CDC Host Class driver to flush sent data to the attached device + * - Added PDI programming support for XMEGA devices to the AVRISP programmer project (thanks to Justin Mattair) + * - Added support for the XPLAIN board Dataflash, with new XPLAIN_REV1 board target for the different dataflash used + * on the first revision boards compared to the one mounted on later revisions + * - Added new HID_ALIGN_DATA() macro to return the pre-retrieved value of a HID report item, left-aligned to a given datatype + * - Added new PreviousValue to the HID Report Parser report item structure, for easy monitoring of previous report item values + * - Added new EVK527 board target + * - Added new USB_Host_GetDeviceStringDescriptor() convenience function + * - Added new LEDNotification project to the library, to give a visual LED notification on new events from the host + * - Added new NO_DEVICE_REMOTE_WAKEUP and NO_DEVICE_SELF_POWER compile time options + * + * Changed: + * - Removed code in the Keyboard demos to send zeroed reports between two reports with differing numbers of key codes + * as this relied on non-standard OS driver behaviour to repeat key groups + * - The SCSI_Request_Sense_Response_t and SCSI_Inquiry_Response_t type defines are now part of the Mass Storage Class + * driver common defines, rather than being defined in the Host mode Class driver section only + * - The USB_MODE_HOST token is now defined even when host mode is not available + * - The CALLBACK_HID_Device_CreateHIDReport() HID Device Class driver callback now has a new ReportType parameter to + * indicate the report type to generate + * - All Class Drivers now return false or the "DeviceDisconnected" error code of their respective error enums when a function + * is called when no host/device is connected where possible + * - The HOST_SENDCONTROL_DeviceDisconnect enum value has been renamed to HOST_SENDCONTROL_DeviceDisconnected to be in line + * with the rest of the library error codes + * - Make MIDI device demos also turn off the on board LEDs if MIDI Note On messages are sent with a velocity of zero, + * which some devices use instead of Note Off messages (thanks to Robin Green) + * - The CDC demos are now named "VirtualSerial" instead to indicate the demos' function rather than its implemented USB class, + * to reduce confusion and to be in line with the rest of the LUFA demos + * - The SImage_Host_SendBlockHeader() and SImage_Host_ReceiveBlockHeader() Still Image Host Class driver functions are now public + * + * Fixed: + * - Added missing CDC_Host_CreateBlockingStream() function code to the CDC Host Class driver + * - Fixed incorrect values for REPORT_ITEM_TYPE_* enum values causing corrupt data in the HID Host Parser + * - Fixed misnamed SI_Host_USBTask() and SI_Host_ConfigurePipes() functions + * - Fixed broken USB_GetNextDescriptor() function causing the descriptor to jump ahead double the expected amount + * - Fixed Pipe_IsEndpointBound() not masking the given Endpoint Address against PIPE_EPNUM_MASK + * - Fixed host state machine not enabling Auto VBUS mode when HOST_DEVICE_SETTLE_DELAY_MS is set to zero + * - Fixed misnamed Pipe_SetPipeToken() macro for setting a pipe's direction + * - Fixed CDCHost failing on devices with bidirectional endpoints + * - Fixed USB driver failing to define the PLL prescaler mask for the ATMEGA8U2 and ATMEGA16U2 + * - Fixed HID Parser not distributing the Usage Min and Usage Max values across an array of report items + * - Fixed Mass Storage Host Class driver and Low Level demo not clearing the error condition if an attached device returns a + * STALL to a GET MAX LUN request (thanks to Martin Luxen) + * - Fixed TeensyHID bootloader not properly shutting down the USB interface to trigger a disconnection on the host before resetting + * - Fixed MassStorageHost Class driver demo not having USB_STREAM_TIMEOUT_MS compile time option set properly to prevent slow + * devices from timing out the data pipes + * - Fixed the definition of the Endpoint_BytesInEndpoint() macro for the U4 series AVR parts + * - Fixed MIDI host Class driver MIDI_Host_SendEventPacket() routine not properly checking for Pipe ready before writing + * - Fixed use of deprecated struct initializers, removed library unused parameter warnings when compiled with -Wextra enabled + * - Fixed Still Image Host Class driver truncating the PIMA response code (thanks to Daniel Seibert) + * - Fixed USB_CurrentMode not being reset to USB_MODE_NONE when the USB interface is shut down and both Host and Device modes can be + * used (thanks to Daniel Levy) + * - Fixed TeensyHID bootloader not enumerating to the host correctly (thanks to Clint Fisher) + * - Fixed AVRISP project timeouts not checking for the correct timeout period (thanks to Carl Ott) + * - Fixed STK525 Dataflash driver using incorrect bit-shifting for Dataflash addresses (thanks to Tim Mitchell) + * + * \section Sec_ChangeLog091122 Version 091122 + * + * New: + * - Added new Dual Role Keyboard/Mouse demo + * - Added new HID_HOST_BOOT_PROTOCOL_ONLY compile time token to reduce the size of the HID Host Class driver when + * Report protocol is not needed + * - Added new MIDI LowLevel and ClassDriver Host demo, add new MIDI Host Class driver + * - Added new CDC/Mouse ClassDriver device demo + * - Added new Joystick Host ClassDriver and LowLevel demos + * - Added new Printer Host mode Class driver + * - Added new Printer Host mode ClassDriver demo + * - Added optional support for double banked endpoints and pipes in the Device and Host mode Class drivers + * - Added new stream creation function to the CDC Class drivers, to easily make standard I/O streams from CDC Class driver instances + * + * Changed: + * - Removed mostly useless "TestApp" demo, as it was mainly useful only for checking for syntax errors in the library + * - MIDI device demos now receive MIDI events from the host and display note ON messages via the board LEDs + * - Cleanups to the Device mode Mass Storage demo application SCSI routines + * - Changed Audio Class driver sample read/write functions to be inline, to reduce the number of cycles needed to transfer + * samples to and from the device (allowing more time for sample processing and output) + * - Audio class Device mode demos now work at both 16MHz and 8MHz, rather than just at 8MHz + * - The previous USBtoSerial demo has been moved into the projects directory, as it was just a modified CDC demo + * - The Endpoint/Pipe functions now use the const qualifier on the input buffer + * - Changed the CALLBACK_HIDParser_FilterHIDReportItem() callback to pass a HID_ReportItem_t rather than just the current + * item's attributes, to expose more information on the item (including it's type, collection path, etc.) + * - Changed MouseHostWithParser demos to check that the report items have a Mouse usage collection as a parent at some point, + * to prevent Joysticks from enumerating with the demo + * - Corrected the name of the misnamed USB_GetDeviceConfigDescriptor() function to USB_Host_GetDeviceConfigDescriptor(). + * - Keyboard LowLevel/ClassDriver demos now support multiple simultaneous key presses (up to 6) per report + * + * Fixed: + * - Fixed PrinterHost demo returning invalid Device ID data when the attached device does not have a + * device ID (thanks to Andrei Krainev) + * - Changed LUFA_VERSION_INTEGER define to use BCD values, to make comparisons easier + * - Fixed issue in the HID Host class driver's HID_Host_SendReportByID() routine using the incorrect mode (control/pipe) + * to send report to the attached device + * - Fixed ClassDriver AudioOutput device demo not selecting an audio output mode + * - Fixed incorrect SampleFrequencyType value in the AudioInput and AudioOutput ClassDriver demos' descriptors + * - Fixed incorrect event name rule in demo/project/bootloader makefiles + * - Fixed HID device class driver not reselecting the correct endpoint once the user callback routines have been called + * - Corrected HID descriptor in the Joystick Device demos - buttons should be placed outside the pointer collection + * - Fixed HID report parser collection paths invalid due to misplaced semicolon in the free path item search loop + * - Fixed HID host Class driver report send/receive report broken when issued through the control pipe + * - Fixed HOST_STATE_AS_GPIOR compile time option being ignored when in host mode (thanks to David Lyons) + * - Fixed LowLevel Keyboard demo not saving the issues report only after it has been sent to the host + * - Fixed Endpoint_Write_Control_Stream_* functions not sending a terminating IN when given data Length is zero + * + * \section Sec_ChangeLog090924 Version 090924 + * + * New: + * - Added new host mode class drivers and matching demos to the library for rapid application development + * - Added flag to the HID report parser to indicate if a device has multiple reports + * - Added new EVENT_USB_Device_StartOfFrame() event, controlled by the new USB_Device_EnableSOFEvents() and + * USB_Device_DisableSOFEvents() macros to give bus-synchronized millisecond interrupts when in USB device mode + * - Added new Endpoint_SetEndpointDirection() macro for bidirectional endpoints + * - Added new AVRISP project, a LUFA powered clone of the Atmel AVRISP-MKII programmer + * - Added ShutDown() functions for all hardware peripheral drivers, so that peripherals can be turned off after use + * - Added new CDC_Device_Flush() command to the device mode CDC Class driver to flush Device->Host data + * - Added extra masks to the SPI driver, changed SPI_Init() so that the clock polarity and sample modes can be set + * - Added new callback to the HID report parser, so that the user application can filter only the items it is interested + * in to be stored into the HIDReportInfo structure to save RAM + * - Added support for the officially recommended external peripheral layout for the BUMBLEB board (thanks to Dave Fletcher) + * - Added new Pipe_IsFrozen() macro to determine if the currently selected pipe is frozen + * - Added new USB_GetHIDReportSize() function to the HID report parser to retrieve the size of a given report by its ID + * - Added new combined Mass Storage and Keyboard demo (thanks to Matthias Hullin) + * + * Changed: + * - SetIdle requests to the HID device driver with a 0 idle period (send changes only) now only affect the requested + * HID interface within the device, not all HID interfaces + * - Added explicit attribute masks to the device mode demos' descriptors + * - Added return values to the CDC and MIDI class driver transmit functions + * - Optimized Endpoint_Read_Word_* and Pipe_Read_Word_* macros to reduce compiled size + * - Added non-null function parameter pointer restrictions to USB Class drivers to improve user code reliability + * - Added new "Common" section to the class drivers, to hold all mode-independent definitions for clarity + * - Moved SCSI command/sense constants into the Mass Storage Class driver, instead of the user-code + * - Altered the SCSI commands in the LowLevel Mass Storage Host to save on FLASH space by reducing function calls + * - Changed the parameters and behaviour of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks + * and data validations internally, to simplify user code + * - Changed HIDParser to only zero out important values in the Parsed HID Report Item Information structure to save cycles + * - The HID report parser now always processed FEATURE items - HID_ENABLE_FEATURE_PROCESSING token now has no effect + * - The HID report parser now always ignores constant-data items, HID_INCLUDE_CONSTANT_DATA_ITEMS token now has no effect + * - The Benito Programmer project now has its own unique VID/PID pair allocated from the Atmel donated LUFA VID/PID pool + * - Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names + * are used in a project + * - The HID Report Parser now gives information on the total length of each report within a HID interface + * - The USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now separate USB_Descriptor_* and + * USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so both may be used + * + * Fixed: + * - Fixed possible lockup in the CDC device class driver, when the host sends data that is a multiple of the + * endpoint's bank + * - Fixed swapped parameters in the HID state memory copy call while processing a HID PUSH item in the HID report parser + * - Fixed memory corruption HID report parser when too many COLLECTION or PUSH items were processed + * - Fixed HID report parser not resetting the FEATURE item count when a REPORT ID item is encountered + * - Fixed USBtoSerial demos not reading in UDR1 when the USART receives data but the USB interface is not enumerated, + * causing continuous USART receive interrupts + * - Fixed misspelled event name in the Class driver USBtoSerial demo, preventing correct operation + * - Fixed invalid data being returned when a GetStatus request is issued in Device mode with an unhandled data recipient + * - Added hardware USART receive interrupt and software buffering to the Benito project to ensure received data is not + * missed or corrupted + * - Fixed Device mode HID Class driver always sending IN packets, even when nothing to report + * - Fixed Device mode HID Class driver not explicitly initializing the ReportSize parameter to zero before calling callback + * routine, so that ignored callbacks don't cause incorrect data to be sent + * - Fixed StillImageHost not correctly freezing and unfreezing data pipes while waiting for a response block header + * - Fixed error in the PrinterHost demo preventing the full page data from being sent to the attached device (thanks to John Andrews) + * - Fixed CDC based demos and projects' INF driver files under 64 bit versions of Windows (thanks to Ronny Hanson, Thomas Bleeker) + * - Re-add in missing flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.) + * - Fix allowable F_CPU values comment in project makefiles to more accurately reflect the allowable values on the USB AVRs + * - Fixed DFU and CDC class bootloaders on the series 2 USB AVRs, corrected invalid signatures, added support for the new + * ATMEGAxx2 series 2 variant AVRs to the DFU bootloader + * - Fixed Low Level USBtoSerial demo not storing received characters (thanks to Michael Cooper) + * - Fixed MIDI Device Class driver not sending/receiving MIDI packets of the correct size (thanks to Thomas Bleeker) + * + * + * \section Sec_ChangeLog090810 Version 090810 + * + * New: + * - Added new device class drivers and matching demos to the library for rapid application development + * - Added new PrinterHost demo (thanks to John Andrews) + * - Added USB Missile Launcher project, submitted by Dave Fletcher + * - Added new Benito Arduino Programmer project + * - Added incomplete device and host mode demos for later enhancement + * - Updated MassStorage device block write routines to use ping-pong Dataflash buffering to increase throughput by around 30% + * - Error status LEDs shown when device endpoint configuration fails to complete in all demos and projects + * - Added new USB_Host_SetDeviceConfiguration() convenience function for easy configuration selection of devices while in USB + * host mode + * - Added new USB_Host_ClearPipeStall() convenience function to clear a stall condition on an attached device's endpoint + * - Added new USB_Host_GetDeviceDescriptor() convenience function to retrieve the attached device's Device descriptor + * - Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers + * - Added new USE_INTERNAL_SERIAL define for using the unique serial numbers in some AVR models as the USB device's serial number, + * added NO_INTERNAL_SERIAL compile time option to turn off new serial number reading code + * - Added new DATAFLASH_CHIP_MASK() macro to the Dataflash driver, which returns the Dataflash select mask for the given chip index + * - Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the + * device has been removed (for use when an error occurs or communications with the device have completed) + * - Added new FAST_STREAM_TRANSFERS compile time option for faster stream transfers via multiple bytes copied per stream loop + * - Added stdio stream demo code to the CDC device demos, to show how to create standard streams out of the virtual serial ports + * - Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions + * - Added new USE_FLASH_DESCRIPTORS and FIXED_NUM_CONFIGURATIONS compile time options + * - Added support for the new ATMEGA32U2, ATMEGA16U2 and ATMEGA8U2 AVR models + * - Added new USB_DeviceState variable to keep track of the current Device mode USB state + * - Added new LEDs_ToggleLEDs() function to the LEDs driver + * - Added new Pipe_BoundEndpointNumber() and Pipe_IsEndpointBound() functions + * - Added new DEVICE_STATE_AS_GPIOR and HOST_STATE_AS_GPIOR compile time options + * - Added 404 Not Found errors to the webserver in the RNDIS demos to indicate invalid URLs + * + * Changed: + * - Deprecated pseudo-scheduler and removed dynamic memory allocator from the library (first no longer needed and second unused) + * - The device-mode CALLBACK_USB_GetDescriptor() function now has an extra parameter so that the memory space in which the requested + * descriptor is located can be specified. This means that descriptors can now be located in multiple memory spaces within a device. + * - Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality + * - Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead + * - Extended USB_GetDeviceConfigDescriptor() routine to require the configuration number within the device to fetch + * - Dataflash_WaitWhileBusy() now always ensures that the dataflash is ready for the next command immediately after returning, + * no need to call Dataflash_ToggleSelectedChipCS() afterwards + * - Low level API MIDI device demo no longer blocks if a note change event is sent while the endpoint is not ready + * - Pipe_GetErrorFlags() now returns additional error flags for overflow and underflow errors + * - Pipe stream functions now automatically set the correct pipe token, so that bidirectional pipes can be used + * - Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling + * the existing Pipe_SetFiniteINRequests() function + * - Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case + * - Host mode demos now use sane terminal escape codes, so that text is always readable and events/program output is visually distinguished + * from one another using foreground colours + * - Internal per-device preprocessing conditions changed to per-device series rather than per-controller group for finer-grain + * internal control + * - Interrupts are no longer disabled during the processing of Control Requests on the default endpoint while in device mode + * - AudioOutput demos now always output to board LEDs, regardless of output mode (removed AUDIO_OUT_LEDS project option) + * - Removed SINGLE_DEVICE_CONFIGURATION compile time option in favor of the new FIXED_NUM_CONFIGURATIONS option so that the exact number + * of device configurations can be defined statically + * - Removed VBUS events, as they are already exposed to the user application via the regular device connection and disconnection events + * - Renamed and altered existing events to properly separate out Host and Device mode events + * - All demos switched over from GNU99 standards mode to C99 standards mode, to reduce the dependancies on GCC-only language extensions + * + * Fixed: + * - Changed bootloaders to use FLASHEND rather than the existence of RAMPZ to determine if far FLASH pointers are needed to fix + * bootloaders on some of the USB AVR devices where avr-libc erroneously defines RAMPZ + * - Fixes to MassStorageHost for better device compatibility (increase command timeout, change MassStore_WaitForDataReceived() + * to only unfreeze and check one data pipe at a time) to prevent incorrect device enumerations and freezes while transferring data + * - Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is + * cleared to prevent endpoint type corruption + * - Fixed issue opening CDC-ACM ports on hosts when the CDC device tries to send data before the host has set the line encoding + * - Fixed USB_OPT_MANUAL_PLL option being ignored during device disconnects on some models (thanks to Brian Dickman) + * - Fixed documentation mentioning Pipe_GetCurrentToken() function when correct function name is Pipe_GetPipeToken() + * - Fixed ADC driver for the ATMEGA32U4 and ATMEGA16U4 (thanks to Opendous Inc.) + * - Fixed CDCHost demo unfreezing the pipes at the point of configuration, rather than use + * - Fixed MassStorage demo not clearing the reset flag when a Mass Storage Reset is issued while not processing a command + * - Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails + * - Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used + * - Fixed Host mode to Device mode UID change not causing a USB Disconnect event when a device was connected + * - Fixed Mouse/Keyboard demos not performing the correct arithmetic on the Idle period at the right times (thanks to Brian Dickman) + * - Fixed GenericHID failing HID class tests due to incorrect Logical Minimum and Logical Maximum values (thanks to Søren Greiner) + * - Fixed incorrect PIPE_EPNUM_MASK mask causing pipe failures on devices with endpoint addresses of 8 and above (thanks to John Andrews) + * - Fixed report data alignment issues in the MouseHostWithParser demo when X and Y movement data size is not a multiple of 8 bits + * - Fixed HID Report Descriptor Parser not correctly resetting internal states when a REPORT ID element is encountered + * - Fixed incorrect BUTTONS_BUTTON1 for the STK526 target + * - Fixed RNDIS demos freezing when more than one connection was attempted simultaneously, causing memory corruption + * - Fixed USBtoSerial demo receiving noise from the USART due to pull-up not being enabled + * + * + * \section Sec_ChangeLog090605 Version 090605 + * + * - Fixed bug in RNDISEthernet and DualCDC demos not using the correct USB_ControlRequest structure for control request data + * - Fixed documentation showing incorrect USB mode support on the supported AVRs list + * - Fixed RNDISEthernet not working under Linux due to Linux requiring an "optional" RNDIS request which was unhandled + * - Fixed Mouse and Keyboard device demos not acting in accordance with the HID specification for idle periods (thanks to Brian Dickman) + * - Removed support for endpoint/pipe non-control interrupts; these did not act in the way users expected, and had many subtle issues + * - Fixed Device Mode not handling Set Feature and Clear Feature Chapter 9 requests that are addressed to the device (thanks to Brian Dickman) + * - Moved control endpoint interrupt handling into the library itself, enable via the new INTERRUPT_CONTROL_ENDPOINT token + * - Fixed CDCHost not clearing configured pipes and resetting configured pipes mask when a partially enumerated invalid CDC + * interface is skipped + * - Clarified the size of library tokens which accept integer values in the Compile Time Tokens page, values now use the smallest datatype + * inside the library that is able to hold their defined value to save space + * - Removed DESCRIPTOR_ADDRESS() macro as it was largely superfluous and only served to obfuscate code + * - Rewritten event system to remove all macros, to make user code clearer + * - Fixed incorrect ENDPOINT_EPNUM_MASK mask preventing endpoints above EP3 from being selected (thanks to Jonathan Oakley) + * - Removed STREAM_CALLBACK() macro - callbacks now use regular function definitions to clarify user code + * - Removed DESCRIPTOR_COMPARATOR() macro - comparators should now use regular function definitions to clarify user code + * - USB_IsConnected is now cleared before the USB_Disconnect() event is fired in response to VBUS being removed + * - Fixed incorrect PID value being used in the USBtoSerial project (thanks to Phill) + * - Deleted StdDescriptors.c, renamed USB_GetDescriptor() to CALLBACK_USB_GetDescriptor, moved ConfigDescriptor.c/.h from the + * LUFA/Drivers/USB/Class/ directory to LUFA/Drivers/USB/HighLevel/ in preparation for the new USB class APIs + * - Moved out each demos' functionality library files (e.g. Ring Buffer library) to /Lib directories for a better directory structure + * - Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt + * - Fixed possible enumeration errors from spin-loops which may fail to exit if the USB connection is severed before the exit condition + * becomes true + * + * + * \section Sec_ChangeLog090510 Version 090510 + * + * - Added new GenericHIDHost demo + * - Corrections to the KeyboardHost and MouseHost demos' pipe handling to freeze and unfreeze the data pipes at the point of use + * - KeyboardHost, MouseHost and GenericHIDHost demos now save and restore the currently selected pipe inside the pipe ISR + * - Changed GenericHID device demo to use the LUFA scheduler, added INTERRUPT_DATA_ENDPOINT and INTERRUPT_CONTROL_ENDPOINT compile + * time options + * - All comments in the library, bootloaders, demos and projects have now been spell-checked and spelling mistakes/typos corrected + * - Added new PIMA_DATA_SIZE() define to the Still Image Host demo + * - Add call to MassStore_WaitForDataReceived() in MassStore_GetReturnedStatus() to ensure that the CSW has been received in the + * extended MSC timeout period before continuing, to prevent long processing delays from causing the MassStore_GetReturnedStatus() + * to early-abort (thanks to Dmitry Maksimov) + * - Move StdRequestType.h, StreamCallbacks.h, USBMode.h from the LowLevel USB driver directory to the HighLevel USB driver directory, + * where they are more suited + * - Removed all binary constants and replaced with decimal or hexadecimal constants so that unpatched GCC compilers can still build the + * code without having to be itself patched and recompiled first + * - Added preprocessor checks and documentation to the bootloaders giving information about missing SIGNATURE_x defines due to + * outdated avr-libc versions. + * - Added support to the CDCHost demo for devices with multiple CDC interfaces which are not the correct ACM type preceding the desired + * ACM CDC interface + * - Fixed GenericHID demo not starting USB and HID management tasks when not using interrupt driven modes (thanks to Carl Kjeldsen) + * - Fixed RNDISEthenet demo checking the incorrect message field for packet size constraints (thanks to Jonathan Oakley) + * - Fixed WriteNextReport code in the GenericHIDHost demo using incorrect parameter types and not selecting the correct endpoint + * - Adjusted sample CTC timer calculations in the AudioOutput and AudioInput demos to match the CTC calculations in the AVR datasheet, + * and to fix instances where rounding caused the endpoint to underflow (thanks to Robin Theunis) + * - The USB_Host_SendControlRequest() function no longer automatically selects the Control pipe (pipe 0), so that other control type + * pipes can be used with the function + * - The USB Host management task now saves and restores the currently selected pipe before and after the task completes + * - Fixed GenericHIDHost demo report write routine incorrect for control type requests (thanks to Andrei Krainev) + * - Removed Endpoint_ClearCurrentBank() and Pipe_ClearCurrentBank() in favor of new Endpoint_ClearIN(), Endpoint_ClearOUT(), + * Pipe_ClearIN() and Pipe_ClearOUT() macros (done to allow for the detection of packets of zero length) + * - Renamed *_ReadWriteAllowed() macros to *_IsReadWriteAllowed() to remain consistent with the rest of the LUFA API + * - Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived(), Endpoint_ClearSetupReceived() macro has been + * renamed to Endpoint_ClearSETUP(), the Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent() and the + * Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe + * bank management API + * - Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel from Curetis AG) + * - Updated library doxygen documentation, added groups, changed documentation macro functions to real functions for clarity + * - Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity + * - Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway + * - Renamed the main Drivers/AT90USBXXX directory to Drivers/Peripheral, renamed the Serial_Stream driver to SerialStream + * - Fixed CDC and USBtoSerial demos freezing where buffers were full while still transmitting or receiving (thanks to Peter Hand) + * - Removed "Host_" section of the function names in ConfigDescriptor.h, as most of the routines can now be used in device mode on the + * device descriptor + * - Renamed functions in the HID parser to have a "USB_" prefix and the acronym "HID" in the name + * - Fixed incorrect HID interface class and subclass values in the Mouse and KeyboardMouse demos (thanks to Brian Dickman) + * - Capitalized the "Descriptor_Search" and "Descriptor_Search_Comp" prefixes of the values in the DSearch_Return_ErrorCodes_t and + * DSearch_Comp_Return_ErrorCodes_t enums + * - Removed "ERROR" from the enum names in the endpoint and pipe stream error code enums + * - Renamed the USB_PowerOnErrorCodes_t enum to USB_InitErrorCodes_t, renamed the POWERON_ERROR_NoUSBModeSpecified enum value to + * USB_INITERROR_NoUSBModeSpecified + * - Renamed USB_PowerOnFail event to USB_InitFailure + * - Renamed OTG.h header functions to be more consistent with the rest of the library API + * - Changed over all deprecated GCC structure tag initializers to the standardized C99 format (thanks to Mike Alexander) + * - USB_HostRequest renamed to USB_ControlRequest, entire control request header is now read into USB_ControlRequest in Device mode + * rather than having the library pass only partially read header data to the application + * - The USB_UnhandledControlPacket event has had its parameters removed, in favor of accessing the new USB_ControlRequest structure + * - The Endpoint control stream functions now correctly send a ZLP to the host when less data than requested is sent + * - Fixed USB_RemoteWakeupEnabled flag never being set (the REMOTE WAKEUP Set Feature request was not being handled) + * - Renamed the FEATURELESS_CONTROL_ONLY_DEVICE compile-time token to CONTROL_ONLY_DEVICE + * - Endpoint configuration is now refined to give better output when all configurations have static inputs - removed the now useless + * STATIC_ENDPOINT_CONFIGURATION compile time token + * - Fixed SPI driver init function not clearing SPI2X bit when not needed + * - Fixed PREVENT ALLOW MEDIUM REMOVAL command issuing in the MassStorageHost demo using incorrect parameters (thanks to Mike Alex) + * - Fixed MassStorageHost demo broken due to an incorrect if statement test in MassStore_GetReturnedStatus() + * - Fixed reversed signature byte ordering in the CDC bootloader (thanks to Johannes Raschke) + * - Changed PIPE_CONTROLPIPE_DEFAULT_SIZE from 8 to 64 to try to prevent problems with faulty devices which do not respect the given + * wLength value when reading in the device descriptor + * - Fixed missing semicolon in the ATAVRUSBRF01 LED board driver code (thanks to Morten Lund) + * - Changed LED board driver code to define dummy LED masks for the first four board LEDs, so that user code can be compiled for boards + * with less than four LEDs without code modifications (thanks to Morten Lund) + * - Changed HWB board driver to Buttons driver, to allow for the support of future boards with more than one mounted GPIO button + * - Serial driver now correctly calculates the baud register value when in double speed mode + * - Init function of the Serial driver is now static inline to product smaller code for the common-case of static init values + * + * + * \section Sec_ChangeLog090401 Version 090401 + * + * - Fixed MagStripe project configuration descriptor containing an unused (blank) endpoint descriptor + * - Incorporated makefile changes by Denver Gingerich to retain compatibility with stock (non-WinAVR) AVR-GCC installations + * - Fixed makefile EEPROM programming targets programming FLASH data in addition to EEPROM data + * - LUFA devices now enumerate correctly with LUFA hosts + * - Fixed Configuration Descriptor search routine freezing when a comparator returned a failure + * - Removed HID report item serial dump in the MouseHostWithParser and KeyboardHostWithParser - useful only for debugging, and + * slowed down the enumeration of HID devices too much + * - Increased the number of bits per track which can be read in the MagStripe project to 8192 when compiled for the AT90USBXXX6/7 + * - Fixed KeyboardMouse demo discarding the wIndex value in the REQ_GetReport request + * - USBtoSerial demo now discards all Rx data when not connected to a USB host, rather than buffering characters for transmission + * next time the device is attached to a host. + * - Added new F_CLOCK compile time constant to the library and makefiles, to give the raw input clock (used to feed the PLL before any + * clock prescaling is performed) frequency, so that the PLL prescale mask can be determined + * - Changed stream wait timeout counter to be 16-bit, so that very long timeout periods can be set for correct communications with + * badly designed hosts or devices which greatly exceed the USB specification limits + * - Mass Storage Host demo now uses a USB_STREAM_TIMEOUT_MS of two seconds to maintain compatibility with poorly designed devices + * - Function attribute ATTR_ALWAYSINLINE renamed to ATTR_ALWAYS_INLINE to match other function attribute macro naming conventions + * - Added ATTR_ALWAYS_INLINE attribute to several key inlined library components, to ensure they are inlined in all circumstances + * - Removed SetSystemClockPrescaler() macro, the clock_prescale_set() avr-libc macro has been corrected in recent avr-libc versions + * - Fixed incorrect/missing control status stage transfers on demos, bootloaders and applications (thanks to Nate Lawson) + * - The NO_CLEARSET_FEATURE_REQUEST compile time token has been renamed to FEATURELESS_CONTROL_ONLY_DEVICE, and its function expanded + * to also remove parts of the Get Status chapter 9 request to further reduce code usage + * - Makefile updated to include output giving the currently selected BOARD parameter value + * - Board Dataflash driver now allows for dataflash ICs which use different shifts for setting the current page/byte address (thanks + * to Kenneth Clubb) + * - Added DataflashManager_WriteBlocks_RAM() and DataflashManager_ReadBlocks_RAM() functions to the MassStorage demo, to allow for easy + * interfacing with a FAT library for dataflash file level access + * - Corrected CDC class bootloader to fix a few bugs, changed address counter to store x2 addresses for convenience + * - Fixed typos in the SPI driver SPI_SPEED_FCPU_DIV_64 and SPI_SPEED_FCPU_DIV_128 masks (thanks to Markus Zocholl) + * - Keyboard and Mouse device demos (normal, data interrupt and fully interrupt driven) combined into unified keyboard and mouse demos + * - Keyboard and Mouse host demos (normal and data interrupt driven) combined into unified keyboard and mouse demos + * - Removed AVRISP_Programmer project due to code quality concerns + * - Fixed CDC demo not sending an empty packet after each transfer to prevent the host from buffering incoming data + * - Fixed documentation typos and preprocessor checks relating to misspellings of the USE_RAM_DESCRIPTORS token (thanks to Ian Gregg) + * - Fixed USBTask.h not conditionally including HostChapter9.h only when USB_CAN_BE_HOST is defined (thanks to Ian Gregg) + * - Fixed incorrect ADC driver init register manipulation (thanks to Tobias) + * - Added new GenericHID device demo application + * - Fixed Still Image Host SImage_SendData() function not clearing the pipe bank after sending data + * + * + * \section Sec_ChangeLog090209 Version 090209 + * + * - PWM timer mode in AudioOut demo changed to Fast PWM for speed + * - Updated Magstripe project to work with the latest hardware revision + * - Fixed library not responding to the BCERRI flag correctly in host mode, leading to device lockups + * - Fixed library handling Get Descriptor requests when not addressed as standard requests to the device or interface (thanks to + * Nate Lawson) + * - Fixed serious data corruption issue in MassStorage demo dataflash write routine + * - Added new NO_CLEARSET_FEATURE_REQUEST compile time token + * - USB task now restores previous global interrupt state after execution, rather than forcing global interrupts to be enabled + * - Fixed USB_DeviceEnumerationComplete event firing after each configuration change, rather than once after the initial configuration + * - Added ENDPOINT_DOUBLEBANK_SUPPORTED() macros to Endpoint.h, altered ENDPOINT_MAX_SIZE() to allow user to specify endpoint + * - ENDPOINT_MAX_ENDPOINTS changed to ENDPOINT_TOTAL_ENDPOINTS, PIPE_MAX_PIPES changed to PIPE_TOTAL_PIPES + * - Endpoint and Pipe non-control stream functions now ensure endpoint or pipe is ready before reading or writing + * - Changed Teensy bootloader to use a watchdog reset when exiting rather than a software jump + * - Fixed integer promotion error in MassStorage and MassStorageHost demos, corrupting read/write transfers + * - SPI_SendByte is now SPI_TransferByte, added new SPI_SendByte and SPI_ReceiveByte functions for fast one-way transfer + * - MassStorage demo changed to use new fast one-way SPI transfers to increase throughput + * - MassStorage handling of Mass Storage Reset class request improved + * - Altered MassStorage demo dataflash block read code for speed + * - Added USB_IsSuspended global flag + * - Simplified internal Dual Mode (OTG) USB library code to reduce code size + * - Extended stream timeout period to 100ms from 50ms + * - Mass Storage Host demo commands now all return an error code from the Pipe_Stream_RW_ErrorCodes_t enum + * - Added SubErrorCode parameter to the USB_DeviceEnumerationFailed event + * - VBUS drop interrupt now disabled during the manual-to-auto VBUS delivery handoff + * - Simplified low level backend so that device/host mode initialization uses the same code paths + * - Added workaround for faulty Mass Storage devices which do not implement the required GET_MAX_LUN request + * - Removed buggy Telnet application from the RNDIS demo + * - Moved Mass Storage class requests in the Mass Storage Host demo to wrapper functions in MassStoreCommands.c + * - Fixed incorrect SCSI command size value in the Request Sense command in MassStoreCommands.c + * - Added SetProtocol request to HID class non-parser Mouse and Keyboard demos to force devices to use the correct Boot Protocol + * - Added new "dfu" and "flip" programming targets to project makefiles + * - HID_PARSE_Sucessful enum member typo corrected to HID_PARSE_Successful + * - Changed COLLECTION item structures in the HID descriptor parser to include the collection's Usage Page value + * - Serial driver now sets Tx line as output, enables pull-up on Rx line + * - Fixed smaller USB AVRs raising multiple connection and disconnection events when NO_LIMITED_CONTROLLER_CONNECT is disabled + * - Added HOST_DEVICE_SETTLE_DELAY_MS to give the host delay after a device is connected before it is enumerated + * - Fixed KeyboardHostWithParser demo linking against the wrong global variables + * - Completed doxygen documentation of remaining library bootloaders, demos and projects + * - Fixed incorrect bootloader start address in the TeensyHID bootloader + * - Added HWB button whole-disk ASCII dump functionality to MassStoreHost demo + * - Replaced printf_P(PSTR("%c"), {Variable}) calls with putchar() for speed and size savings + * - Serial driver now accepts baud rates over 16-bits in size, added double speed flag option + * - Fixed incorrect callback abort return value in Pipe.c + * - Added new flip-ee and dfu-ee makefile targets (courtesy of Opendous Inc.) + * - Removed reboot-on-disconnect code from the TeensyHID bootloader, caused problems on some systems + * - Fixed AudioOutput and AudioInput demos looping on the endpoint data, rather than processing a sample at a time and returning + * each time the task runs to allow for other tasks to execute + * - Added support for the Atmel ATAVRUSBRF01 board + * - Added AVRISP Programmer Project, courtesy of Opendous Inc. + * - Fixed CDC Host demo not searching through both CDC interfaces for endpoints + * - Fixed incorrect Product String descriptor length in the DFU class bootloader + * + * + * \section Sec_ChangeLog081224 Version 081224 + * + * - MyUSB name changed to LUFA, the Lightweight USB Framework for AVRs + * - Fixed Mass Storage Host demo's MassStore_SendCommand() delay in the incorrect place + * - Fixed USBtoSerial demo not calling ReconfigureUSART() after a change in the line encoding + * - Fixed infinite loop in host mode Host-to-Device control transfers with data stages + * - HID report parser now supports devices with multiple reports in one interface via Report IDs + * - Fixed RZUSBSTICK board LED driver header incorrect macro definition order causing compile errors + * - Calling USB_Init() when the USB interface is already configured now forces a complete interface reset + * and re-enumeration - fixes MyUSB DFU bootloader not switching to app code correctly when soft reset used + * - Fixed "No newline at end of file" warning when stream callbacks are enabled + * - DFU bootloader now uses fixed signature bytes per device, rather than reading them out dynamically for size + * - Added new FIXED_CONTROL_ENDPOINT_SIZE and USE_SINGLE_DEVICE_CONFIGURATION switches to statically define certain values to + * reduce compiled binary size + * - Added new NO_LIMITED_CONTROLLER_CONNECT switch to prevent the library from trying to determine bus connection + * state from the suspension and wake up events on the smaller USB AVRs + * - Added summary of all library compile time tokens to the documentation + * - Added overview of the LUFA scheduler to the documentation + * - Removed MANUAL_PLL_CONTROL compile time token, replaced with a mask for the USB_Init() Options parameter + * - CDC bootloader now uses the correct non-far or far versions of the pgm_* functions depending on if RAMPZ is defined + * - Doxygen documentation now contains documentation on all the projects, bootloaders and most demos included with the library + * - CDC bootloader now runs user application when USB disconnected rather than waiting for a hard reset + * - MouseHostWithParser and KeyboardHostWithParser now support multiple-report devices + * - RNDIS demo can now close connections correctly using the new TCP_APP_CLOSECONNECTION() macro - used in Webserver + * - Fixed the DFU bootloader, no longer freezes up when certain files are programmed into an AVR, made reading/writing faster + * - Fixed mouse/joystick up/down movements reversed - HID mouse X/Y coordinates use a left-handed coordinate system, not a normal + * right-handed system + * - Added stub code to the CDC and USBtoSerial demos showing how to read and set the RS-232 handshake lines - not currently used in + * the demos, but the example code and supporting defines are now in place + * - Interrupts are now disabled when processing a control request in device mode, to avoid exceeding the strict control request + * timing requirements. + * - All demos now use a central StatusUpdate() function rather than direct calls to the board LED functions, so that the demos can + * easily be altered to show different LED combinations (or do something else entirely) as the demo's status changes + * - Removed LED commands from the CDC bootloader, unused by most AVR910 programming software + * - Fixed RNDIS demo ICMP ping requests echoing back incorrect data + * - Added DHCP server code to RNDIS demo, allowing for hands-free auto configuration on any PC + * - Fixed DFU bootloader PID value for the ATMEGA16U4 AVR + * - Endpoint and Pipe configuration functions now return an error code indicating success or failure + * - USB Reset in device mode now resets and disables all device endpoints + * - Added intermediate states to the host mode state machine, reducing the USB task blocking time to no more than 1ms explicitly per + * invocation when in host mode + * - Added support for the ATMEGA32U6 microcontroller + * - Added STATIC_ENDPOINT_CONFIGURATION compile time option, enabled in the bootloaders to minimize space usage + * - Removed redundant code from the USB device GetStatus() chapter 9 processing routine + * - Added new TeensyHID bootloader, compatible with the Teensy HID protocol (http://www.pjrc.com/teensy/) + * - Versions are now numbered by release dates, rather than arbitrary major/minor revision numbers + * - USB_RemoteWakeupEnabled is now correctly set and cleared by SetFeature and ClearFeature requests from the host + * - Changed prototype of GetDescriptor, so that it now returns the descriptor size (or zero if the descriptor doesn't exist) + * rather than passing the size back to the caller through a parameter and returning a boolean + * + * + * \section Sec_ChangeLog153 Version 1.5.3 - Released 2nd October, 2008 + * + * - Fixed CDC bootloader using pgmspace macros for some descriptors inappropriately + * - Updated all Mouse and Keyboard device demos to include boot protocol support (now works in BIOS) + * - Renamed bootloader directories to remove spaces, which were causing build problems on several OSes + * - Removed serial number strings from all but the MassStore demo where it is required - users were not + * modifying the code to either omit the descriptor or use a unique serial per device causing problems + * when multiple units of the same device were plugged in at the same time + * - AudioOutput and AudioInput demos now correctly silence endpoints when not enabled by the host + * - Added KeyboardMouse demo (Keyboard and Mouse functionality combined into a single demo) + * - Added DriverStubs directory to house board level driver templates, to make MyUSB compatible custom board + * driver creation easier + * - Extended MassStorage demo to support multiple LUNs, 2 by default + * - Fixed incorrect device address mask, preventing the device from enumerating with addresses larger than 63 + * - Fixed incorrect data direction mask in the GetStatus standard request, preventing it from being handled + * - Fixed incorrect GetStatus standard request for endpoints, now returns the endpoint STALL status correctly + * - Added in new USB_RemoteWakeupEnabled and USB_CurrentlySelfPowered flags rather than using fixed values + * - Added DualCDC demo to demonstrate the use of Interface Association Descriptors + * - Added pipe NAK detection and clearing API + * - Added pipe status change (NAK, STALL, etc.) interrupt API + * - Fixed MassStorageHost demo so that it no longer freezes randomly when issuing several commands in a row + * - Host demos configuration descriptor routines now return a unique error code when the returned data does + * not have a valid configuration descriptor header + * - Added Endpoint_WaitUntilReady() and Pipe_WaitUntilReady() functions + * - Stream functions now have software timeouts, timeout period can be set by the USB_STREAM_TIMEOUT_MS token + * - All demos now pass the USB.org automated Chapter 9 device compliance tests + * - All HID demos now pass the USB.org automated HID compliance tests + * - Polling interval of the interrupt endpoint in the CDC based demos changed to 0xFF to fix problems on Linux systems + * - Changed stream functions to accept a new callback function, with NO_STREAM_CALLBACKS used to disable all callbacks + * - Mass Storage demo dataflash management routines changed to use the endpoint stream functions + * - Added AVRStudio project files for each demo in addition to the existing Programmer's Notepad master project file + * - Re-added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes + * are reflected in the hardware (change was previously lost) + * + * + * \section Sec_ChangeLog152 Version 1.5.2 - Released 31st July, 2008 + * + * - Fixed SwapEndian_32() function in Common.h so that it now works correctly (wrong parameter types) + * - Updated RNDIS demo - notification endpoint is no longer blocking so that it works with faulty Linux RNDIS + * implementations (where the notification endpoint is ignored in favor of polling the control endpoint) + * - Fixed incorrect Vendor Description string return size in RNDIS demo for the OID_GEN_VENDOR_DESCRIPTION OID token + * - Added very basic TCP/IP stack and HTTP/TELNET servers to RNDIS demo + * - Fixed DFU bootloader exit causing programming software to complain about failed writes + * - Fixed DFU bootloader EEPROM programming mode wiping first flash page + * - Fixed Clear/Set Feature device standard request processing code (fixing MassStorage demo in the process) + * - Added support for the ATMEGA16U4 AVR microcontroller + * - Library license changed from LGPLv3 to MIT license + * + * + * \section Sec_ChangeLog151 Version 1.5.1 - Released 31st July, 2008 + * + * - Changed host demos to enable the host function task on the firing of the USB_DeviceEnumerationComplete event + * rather than the USB_DeviceAttached event + * - HID Usage Stack now forcefully cleared after an IN/OUT/FEATURE item has been completely processed to remove + * any referenced but not created usages + * - Changed USB_INT_DisableAllInterrupts() and USB_INT_ClearAllInterrupts(), USB_Host_GetNextDescriptorOfType(), + * USB_Host_GetNextDescriptorOfTypeBefore(), USB_Host_GetNextDescriptorOfTypeAfter() to normal functions (from inline) + * - Fixed USBtoSerial demo not sending data, only receiving + * - Fixed main makefile to make all by default, fixed MagStripe directory case to prevent case-sensitive path problems + * - ConfigDescriptor functions made normal, instead of static inline + * - Pipe/Endpoint *_Ignore_* functions changed to *_Discard_*, old names still present as aliases + * - Fixed ENDPOINT_MAX_SIZE define to be correct on limited USB controller AVRs + * - Changed endpoint and pipe size translation routines to use previous IF/ELSE IF cascade code, new algorithmic + * approach was buggy and caused problems + * - Bootloaders now compile with -fno-inline-small-functions option to reduce code size + * - Audio demos now use correct endpoint sizes for full and limited controller USB AVRs, double banking in all cases + * to be in line with the specification (isochronous endpoints MUST be double banked) + * - Added Interface Association descriptor to StdDescriptors.h, based on the relevant USB2.0 ECN + * - Fixed MIDI demo, corrected Audio Streaming descriptor to follow the MIDI-specific AS structure + * - Fixed HID class demo descriptors so that the HID interface's protocol is 0x00 (required for non-boot protocol HID + * devices) to prevent problems on hosts expecting the boot protocol functions to be supported + * - Added read/write control stream functions to Endpoint.h + * - Fixed AudioOut demo not setting port pins to inputs on USB disconnect properly + * - Added RNDISEthernet demo application + * + * + * \section Sec_ChangeLog150 Version 1.5.0 - Released 10 June, 2008 + * + * - Fixed MIDI demo, now correctly waits for the endpoint to be ready between multiple note messages + * - Added CDC Host demo application + * - Added KeyboardFullInt demo application + * - Endpoint and Pipe creation routines now mask endpoint/pipe size with the size mask, to remove transaction + * size bits not required for the routines (improves compatibility with devices) + * - Fixed AudioInput demo - now correctly sends sampled audio to the host PC + * - Fixed AudioOutput demo once more -- apparently Windows requires endpoint packets to be >=192 bytes + * - Shrunk round-robbin scheduler code slightly via the use of struct pointers rather than array indexes + * - Fixed off-by-one error when determining if the Usage Stack is full inside the HID Report parser + * - Renamed Magstripe.h to MagstripeHW.h and moved driver out of the library and into the MagStripe demo folder + * - Added preprocessor checks to enable C linkage on the library components when used with a C++ compiler + * - Added Still Image Host demo application + * - The USB device task now restores the previously selected endpoint, allowing control requests to be transparently + * handled via interrupts while other endpoints are serviced through polling + * - Fixed device signature being sent in reverse order in the CDC bootloader + * - Host demos now have a separate ConfigDescriptor.c/.h file for configuration descriptor processing + * - HostWithParser demos now have a separate HIDReport.c/.h file for HID report processing and dumping + * - Removed non-mandatory commands from MassStorage demo to save space, fixed SENSE ResponseCode value + * - CDC demos now send empty packets after sending a full one to prevent buffering issues on the host + * - Updated demo descriptors to use VID/PID values donated by Atmel + * - Added DoxyGen documentation to the source files + * - Fixed Serial_IsCharReceived() definition, was previously reversed + * - Removed separate USB_Descriptor_Language_t descriptor, USB_Descriptor_String_t is used instead + * - Removed unused Device Qualifier descriptor structure + * - Renamed the USB_CreateEndpoints event to the more appropriate USB_ConfigurationChanged + * - Fixed MassStorageHost demo reading in the block data in reverse + * - Removed outdated typedefs in StdRequestType.h, superseded by the macro masks + * - Corrected OTG.h is now included when the AVR supports both Host and Device modes, for creating OTG products + * - USB_DeviceEnumerationComplete event is now also fired when in device mode and the host has finished its enumeration + * - Interrupt driven demos now properly restore previously selected endpoint when ISR is complete + * - The value of USB_HOST_TIMEOUT_MS can now be overridden in the user project makefile to a custom fixed timeout value + * - Renamed USB_Host_SOFGeneration_* macros to more friendly USB_Host_SuspendBus(), USB_Host_ResumeBus() + * and USB_Host_IsBusSuspended() + * - Renamed *_*_Is* macros to *_Is* to make all flag checking macros consistent, Pipe_SetInterruptFreq() is now + * Pipe_SetInterruptPeriod() to use the correct terminology + * - UnicodeString member of USB_Descriptor_String_t struct changed to an ordinary int array type, so that the GCC + * Unicode strings (prefixed with an L before the opening quotation mark) can be used instead of explicit arrays + * of ASCII characters + * - Fixed Endpoint/Pipes being configured incorrectly if the maximum endpoint/pipe size for the selected USB AVR + * model was given as the bank size + * - HID device demos now use a true raw array for the HID report descriptor rather than a struct wrapped array + * - Added VERSION_BCD() macro, fixed reported HID and USB version numbers in demo descriptors + * - Cleaned up GetDescriptor device chapter 9 handler function + * - Added GET_REPORT class specific request to HID demos to make them complaint to the HID class + * - Cleaned up setting of USB_IsInitialized and USB_IsConnected values to only when needed + * - Removed Atomic.c and ISRMacro.h; the library was already only compatible with recent avr-lib-c for other reasons + * - All demos and library functions now use USB standardized names for the USB data (bRequest, wLength, etc.) + * - Added USE_NONSTANDARD_DESCRIPTOR_NAMES token to switch back to the non-standard descriptor element names + * + * + * \section Sec_ChangeLog141 Version 1.4.1 - Released 5 May, 2008 + * + * - Enhanced KeyboardWithParser demo, now prints out pressed alphanumeric characters like the standard demo + * - Fixed MassStorage demo, read/writes using non mode-10 commands now work correctly + * - Corrected version number in Version.h + * + * + * \section Sec_ChangeLog140 Version 1.4.0 - Released 5 May, 2008 + * + * - Added HID Report Parser API to the library + * - Added Mouse and Keyboard host demo applications, using the new HID report parser engine + * - Added MouseFullInt demo, which demonstrates a fully interrupt (including control requests) mouse device + * - Fixed incorrect length value in the audio control descriptor of the AudioOutput and AudioInput demos + * - Added MIDI device demo application to the library + * - Fixed problem preventing USB devices from being resumed from a suspended state + * - Added new CDC class bootloader to the library, based on the AVR109 bootloader protocol + * - Added header to each demo application indicating the mode, class, subclass, standards used and supported speed + * - Functions expecting endpoint/pipe numbers are no longer automatically masked against ENDPOINT_EPNUM_MASK or + * PIPE_PIPENUM_MASK - this should be manually added to code which requires it + * - Fixed DFU class bootloader - corrected frequency of flash page writes, greatly reducing programming time + * - Renamed AVR_HOST_GetDeviceConfigDescriptor() to USB_Host_GetDeviceConfigDescriptor() and AVR_HOST_GetNextDescriptor() + * to USB_Host_GetNextDescriptor() + * - Added new USB_Host_GetNextDescriptorOfTypeBefore() and USB_Host_GetNextDescriptorOfTypeAfter() routines + * - Moved configuration descriptor routines to MyUSB/Drivers/USB/Class/, new accompanying ConfigDescriptors.c file + * - Added new configuration descriptor comparator API for more powerful descriptor parsing, updated host demos to use the + * new comparator API + * - Fixed MassStorageHost demo capacity printout, and changed data read/write mode from little-endian to the correct + * big-endian for SCSI devices + * - Fixed macro/function naming consistency; USB_HOST is now USB_Host, USB_DEV is now USB_Device + * - Added better error reporting to host demos + * - Added 10 microsecond delay after addressing devices in host mode, to prevent control stalls + * + * + * \section Sec_ChangeLog132 Version 1.3.2 - Released April 1st, 2008 + * + * - Added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes + * are reflected in the hardware + * - Fixed CDC and USBtoSerial demos - Stream commands do not work for control endpoints, and the + * GetLineCoding request had an incorrect RequestType mask preventing it from being processed + * - Improved reliability of the USBtoSerial demo, adding a busy wait while the buffer is full + * - Device control endpoint size is now determined from the device's descriptors rather than being fixed + * - Separated out SPI code into new SPI driver in AT90USBXXX driver directory + * - Bootloader now returns correct PID for the selected USB AVR model, not just the AT90USB128X PID + * - Added support for the RZUSBSTICK board + * - Bicolour driver removed in favor of generic LEDs driver + * - Added support for the ATMEGA32U4 AVR + * - Added MANUAL_PLL_CONTROL compile time option to prevent the USB library from manipulating the PLL + * + * + * \section Sec_ChangeLog131 Version 1.3.1 - Released March 19th 2008 + * + * - Fixed USB to Serial demo - class value in the descriptors was incorrect + * - Control endpoint size changed from 64 bytes to 8 bytes to save on USB FIFO RAM and to allow low + * speed mode devices to enumerate properly + * - USB to Serial demo data endpoints changed to dual-banked 16 byte to allow the demo to work + * on USB AVRs with limited USB FIFO RAM + * - Changed demo endpoint numbers to use endpoints 3 and 4 for double banking, to allow limited + * USB device controller AVRs (AT90USB162, AT90USB82) to function correctly + * - Updated Audio Out demo to use timer 1 for AVRs lacking a timer 3 for the PWM output + * - Fixed incorrect USB_DEV_OPT_HIGHSPEED entry in the Mass Storage device demo makefile + * - Optimized Mass Storage demo for a little extra transfer speed + * - Added LED indicators to the Keyboard demo for Caps Lock, Num Lock and Scroll Lock + * - Added Endpoint_Read_Stream, Endpoint_Write_Stream, Pipe_Read_Stream and Pipe_Write_Stream functions + * (including Big and Little Endian variants) + * - Made Dataflash functions inline for speed, removed now empty Dataflash.c driver file + * - Added new SetSystemClockPrescaler() macro (thanks to Joerg Wunsch) + * - Fixed Endpoint_ClearStall() to function correctly on full USB controller AVRs (AT90USBXXX6/7) + * - Endpoint_Setup_In_Clear() and Endpoint_Setup_Out_Clear() no longer set FIFOCON, in line with the + * directives in the datasheet + * - Fixed PLL prescaler defines for all AVR models and frequencies + * - Fixed ENDPOINT_INT_IN and ENDPOINT_INT_OUT definitions + * - Added interrupt driven keyboard and mouse device demos + * - Combined USB_Device_ClearFeature and USB_Device_SetFeature requests into a single routine for code + * size savings + * - Added missing Pipe_GetCurrentPipe() macro to Pipe.h + * + * + * \section Sec_ChangeLog130 Version 1.3.0 - Released March 7th 2008 + * + * - Unnecessary control endpoint config removed from device mode + * - Fixed device standard request interpreter accidentally processing some class-specific requests + * - Added USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS compile time options to instruct the library + * to use descriptors stored in RAM or EEPROM rather than flash memory + * - All demos now disable watchdog on startup, in case it has been enabled by fuses or the bootloader + * - USB_DEV_OPT_LOWSPEED option now works correctly + * - Added ability to set the USB options statically for a binary size reduction via the USE_STATIC_OPTIONS + * compile time define + * - USB_Init no longer takes a Mode parameter if compiled for a USB device with no host mode option, or + * if forced to a particular mode via the USB_HOST_ONLY or USB_DEVICE_ONLY compile time options + * - USB_Init no longer takes an Options parameter if options statically configured by USE_STATIC_OPTIONS + * - Endpoint_Ignore_* and Pipe_Ignore_* made smaller by making the dummy variable non-volatile so that the + * compiler can throw away the result more efficiently + * - Added in an optional GroupID value to each scheduler entry, so that groups of tasks can once again be + * controlled by the new Scheduler_SetGroupTaskMode() routine + * - Added support for AT90USB162 and AT90USB82 AVR models + * - Added support for the STK525 and STK526 boards + * - Added support for custom board drivers to be supplied by selecting the board type as BOARD_USER, and + * placing board drivers in {Application Directory}/Board/ + * - PLL is now stopped and USB clock is frozen when detached from host in device mode, to save power + * - Joystick defines are now in synch with the schematics - orientation will be rotated for the USBKEY + * - Fixed USB_DEV_IsUSBSuspended() - now checks the correct register + * - Fixed data transfers to devices when in host mode + * - Renamed USB_DEV_OPT_HIGHSPEED to USB_DEV_OPT_FULLSPEED and USB_HOST_IsDeviceHighSpeed() to + * USB_HOST_IsDeviceFullSpeed() to be in line with the official USB speed names (to avoid confusion with + * the real high speed mode, which is unavailable on the USB AVRs) + * + * + * \section Sec_ChangeLog120 Version 1.2.0 - Released February 4th, 2008 + * + * - Added USB_DeviceEnumerationComplete event for host mode + * - Added new Scheduler_Init routine to prepare the scheduler, so that tasks can be started and + * stopped before the scheduler has been started (via Scheduler_Start) + * - Connection events in both Device and Host mode are now interrupt-driven, allowing the USB management + * task to be stopped when the USB is not connected to a host or device + * - All demos updated to stop the USB task when not in use via the appropriate USB events + * - Mass Storage Host demo application updated to function correctly with all USB flash disks + * - Mass Storage Host demo application now prints out the capacity and number of LUNs in the attached + * device, and prints the first block as hexadecimal numbers rather than ASCII characters + * - Endpoint and Pipe clearing routines now clear the Endpoint/Pipe interrupt and status flags + * - Shifted error handling code in the host enum state machine to a single block, to reduce code complexity + * - Added in DESCRIPTOR_TYPE, DESCRIPTOR_SIZE and DESCRIPTOR_CAST macros to make config descriptor processing + * clearer in USB hosts and DESCRIPTOR_ADDRESS for convenience in USB devices + * - Added in alloca macro to common.h, in case the user is using an old version of avr-lib-c missing the macro + * + * + * \section Sec_ChangeLog130 Version 1.1.0 - Released January 25th 2008 + * + * - Fixed DCONNI interrupt being enabled accidentally after a USB reset + * - Fixed DDISCI interrupt not being disabled when a device is not connected + * - Added workaround for powerless pull-up devices causing false disconnect interrupts + * - Added USB_DeviceEnumerationFailed event for Host mode + * - AVR_HOST_GetDeviceConfigDescriptor routine no longer modifies ConfigSizePtr if a valid buffer + * pointer is passed + * - Added ALLOCABLE_BYTES to DynAlloc, and added code to make the size of key storage variables + * dependant on size of memory parameters passed in via the user project's makefile + * - Fixed incorrect device reset routine being called in USBTask + * - Devices which do not connect within the standard 300mS are now supported + * - Removed incorrect ATTR_PURE from Scheduler_SetTaskMode(), which was preventing tasks from being + * started/stopped, as well as USB_InitTaskPointer(), which was breaking dual device/host USB projects + * - Changed scheduler to use the task name rather than IDs for setting the task mode, eliminating the + * need to have a task ID list + * - ID transition interrupt now raises the appropriate device/host disconnect event if device attached + * - Fixed double VBUS change (and VBUS -) event when detaching in device mode + * - Added ability to disable ANSI terminal codes by the defining of DISABLE_TERMINAL_CODES in makefile + * - Removed return from ConfigurePipe and ConfigureEndpoint functions - use Pipe_IsConfigured() and + * Endpoint_IsConfigured() after calling the config functions to determine success + */ + diff --git a/LUFA/ManPages/CompileTimeTokens.txt b/LUFA/ManPages/CompileTimeTokens.txt new file mode 100644 index 0000000..86fa438 --- /dev/null +++ b/LUFA/ManPages/CompileTimeTokens.txt @@ -0,0 +1,212 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_TokenSummary Summary of Compile Tokens + * + * The following lists all the possible tokens which can be defined in a project makefile, and passed to the + * compiler via the -D switch, to alter the LUFA library code. These tokens may alter the library behaviour, + * or remove features unused by a given application in order to save flash space. + * + * + * \section Sec_SummaryNonUSBTokens Non USB Related Tokens + * This section describes compile tokens which affect non-USB sections of the LUFA library. + * + * DISABLE_TERMINAL_CODES - ( \ref Group_Terminal ) \n + * If an application contains ANSI terminal control codes listed in TerminalCodes.h, it might be desired to remove them + * at compile time for use with a terminal which is non-ANSI control code aware, without modifying the source code. If + * this token is defined, all ANSI control codes in the application code from the TerminalCodes.h header are removed from + * the source code at compile time. + * + * + * \section Sec_SummaryUSBClassTokens USB Class Driver Related Tokens + * This section describes compile tokens which affect USB class-specific drivers in the LUFA library. + * + * HID_HOST_BOOT_PROTOCOL_ONLY - ( \ref Group_USBClassHIDHost ) \n + * By default, the USB HID Host class driver is designed to work with HID devices using either the Boot or Report HID + * communication protocols. On devices where the Report protocol is not used (i.e. in applications where only basic + * Mouse or Keyboard operation is desired, using boot compatible devices), the code responsible for the Report protocol + * mode can be removed to save space in the compiled application by defining this token. When defined, it is still necessary + * to explicitly put the attached device into Boot protocol mode via a call to \ref HID_Host_SetBootProtocol(). + * + * HID_STATETABLE_STACK_DEPTH=x - ( \ref Group_HIDParser ) \n + * HID reports may contain PUSH and POP elements, to store and retrieve the current HID state table onto a stack. This + * allows for reports to save the state table before modifying it slightly for a data item, and then restore the previous + * state table in a compact manner. This token may be defined to a non-zero 8-bit value to give the maximum depth of the state + * table stack. If not defined, this defaults to the value indicated in the HID.h file documentation. + * + * HID_USAGE_STACK_DEPTH=x - ( \ref Group_HIDParser ) \n + * HID reports generally contain many USAGE elements, which are assigned to INPUT, OUTPUT and FEATURE items in succession + * when multiple items are defined at once (via REPORT COUNT elements). This allows for several items to be defined with + * different usages in a compact manner. This token may be defined to a non-zero 8-bit value to set the maximum depth of the + * usage stack, indicating the maximum number of USAGE items which can be stored temporarily until the next INPUT, OUTPUT + * and FEATURE item. If not defined, this defaults to the value indicated in the HID.h file documentation. + * + * HID_MAX_COLLECTIONS=x - ( \ref Group_HIDParser ) \n + * HID reports generally contain several COLLECTION elements, used to group related data items together. Collection information + * is stored separately in the processed usage structure (and referred to by the data elements in the structure) to save space. + * This token may be defined to a non-zero 8-bit value to set the maximum number of COLLECTION items which can be processed by the + * parser into the resultant processed report structure. If not defined, this defaults to the value indicated in the HID.h file + * documentation. + * + * HID_MAX_REPORTITEMS=x - ( \ref Group_HIDParser ) \n + * All HID reports contain one or more INPUT, OUTPUT and/or FEATURE items describing the data which can be sent to and from the HID + * device. Each item has associated usages, bit offsets in the item reports and other associated data indicating the manner in which + * the report data should be interpreted by the host. This token may be defined to a non-zero 8-bit value to set the maximum number of + * data elements which can be stored in the processed HID report structure, including INPUT, OUTPUT and (if enabled) FEATURE items. + * If a item has a multiple count (i.e. a REPORT COUNT of more than 1), each item in the report count is placed separately in the + * processed HID report table. If not defined, this defaults to the value indicated in the HID.h file documentation. + * + * HID_MAX_REPORT_IDS=x - ( \ref Group_HIDParser ) \n + * HID reports may contain several report IDs, to logically distinguish grouped device data from one another - for example, a combination + * keyboard and mouse might use report IDs to separate the keyboard reports from the mouse reports. In order to determine the size of each + * report, and thus know how many bytes must be read or written, the size of each report (IN, OUT and FEATURE) must be calculated and + * stored. This token may be defined to a non-zero 8-bit value to set the maximum number of report IDs in a device which can be processed + * and their sizes calculated/stored into the resultant processed report structure. If not defined, this defaults to the value indicated in + * the HID.h file documentation. + * + * NO_CLASS_DRIVER_AUTOFLUSH + * Many of the device and host mode class drivers automatically flush any data waiting to be written to an interface, when the corresponding + * USB management task is executed. This is usually desirable to ensure that any queued data is sent as soon as possible once and new data is + * constructed in the main program loop. However, if flushing is to be controlled manually by the user application via the *_Flush() commands, + * the compile time token may be defined in the application's makefile to disable automatic flushing during calls to the class driver USB + * management tasks. + * + * \section Sec_SummaryUSBTokens General USB Driver Related Tokens + * This section describes compile tokens which affect USB driver stack as a whole in the LUFA library. + * + * NO_STREAM_CALLBACKS - ( \ref Group_EndpointPacketManagement , \ref Group_PipePacketManagement )\n + * Both the endpoint and the pipe driver code contains stream functions, allowing for arrays of data to be sent to or from the + * host easily via a single function call (rather than complex routines worrying about sending full packets, waiting for the endpoint/ + * pipe to become ready, etc.). By default, these stream functions require a callback function which is executed after each byte processed, + * allowing for early-aborts of stream transfers by the application. If callbacks are not required in an application, they can be removed + * by defining this token, reducing the compiled binary size. When removed, the stream functions no longer accept a callback function as + * a parameter. + * + * FAST_STREAM_TRANSFERS - ( \ref Group_EndpointPacketManagement , \ref Group_PipePacketManagement )\n + * By default, streams are transferred internally via a loop, sending or receiving one byte per iteration before checking for a bank full + * or empty condition. This allows for multiple stream functions to be chained together easily, as there are no alignment issues. However, + * this can lead to heavy performance penalties in applications where large streams are used frequently. When this compile time option is + * used, bytes are sent or received in groups of 8 bytes at a time increasing performance at the expense of a larger flash memory consumption + * due to the extra code required to deal with byte alignment. + * + * USE_STATIC_OPTIONS=x - ( \ref Group_USBManagement ) \n + * By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad + * voltage regulator is enabled, and the device speed when in device mode. By defining this token to a mask comprised of the USB options + * mask defines usually passed as the Options parameter to USB_Init(), the resulting compiled binary can be decreased in size by removing + * the dynamic options code, and replacing it with the statically set options. When defined, the USB_Init() function no longer accepts an + * Options parameter. + * + * USB_DEVICE_ONLY - ( \ref Group_USBManagement ) \n + * For the USB AVR models supporting both device and host USB modes, the USB_Init() function contains a Mode parameter which specifies the + * mode the library should be initialized to. If only device mode is required, the code for USB host mode can be removed from the binary to + * save space. When defined, the USB_Init() function no longer accepts a Mode parameter. This define is irrelevant on smaller USB AVRs which + * do not support host mode. + * + * USB_HOST_ONLY - ( \ref Group_USBManagement ) \n + * Same as USB_DEVICE_ONLY, except the library is fixed to USB host mode rather than USB device mode. Not available on some USB AVR models. + * + * USB_STREAM_TIMEOUT_MS=x - ( \ref Group_USBManagement ) \n + * When endpoint and/or pipe stream functions are used, by default there is a timeout between each transfer which the connected device or host + * must satisfy, or the stream function aborts the remaining data transfer. This token may be defined to a non-zero 16-bit value to set the timeout + * period for stream transfers, specified in milliseconds. If not defined, the default value specified in LowLevel.h is used instead. + * + * NO_LIMITED_CONTROLLER_CONNECT - ( \ref Group_Events ) \n + * On the smaller USB AVRs, the USB controller lacks VBUS events to determine the physical connection state of the USB bus to a host. In lieu of + * VBUS events, the library attempts to determine the connection state via the bus suspension and wake up events instead. This however may be + * slightly inaccurate due to the possibility of the host suspending the bus while the device is still connected. If accurate connection status is + * required, the VBUS line of the USB connector should be routed to an AVR pin to detect its level, so that the USB_DeviceState global + * can be accurately set and the \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events manually raised by the RAISE_EVENT macro. + * When defined, this token disables the library's auto-detection of the connection state by the aforementioned suspension and wake up events. + * + * NO_SOF_EVENTS - ( \ref Group_Events ) \n + * By default, there exists a LUFA application event for the start of each USB frame while the USB bus is not suspended in either host or device mode. + * This event can be selectively enabled or disabled by calling the appropriate device or host mode function. When this compile time token is defined, + * the ability to receive USB Start of Frame events via the \ref EVENT_USB_Device_StartOfFrame() or \ref EVENT_USB_Host_StartOfFrame() events is removed, + * reducing the compiled program's binary size. + * + * \section Sec_SummaryUSBDeviceTokens USB Device Mode Driver Related Tokens + * This section describes compile tokens which affect USB driver stack of the LUFA library when used in Device mode. + * + * USE_RAM_DESCRIPTORS - ( \ref Group_Descriptors ) \n + * Define this token to indicate to the USB driver that all device descriptors are stored in RAM, rather than being located in any one + * of the AVR's memory spaces. RAM descriptors may be desirable in applications where the descriptors need to be modified at runtime. + * + * USE_FLASH_DESCRIPTORS - ( \ref Group_Descriptors ) \n + * Similar to USE_RAM_DESCRIPTORS, but all descriptors are stored in the AVR's FLASH memory rather than RAM. + * + * USE_EEPROM_DESCRIPTORS - ( \ref Group_Descriptors ) \n + * Similar to USE_RAM_DESCRIPTORS, but all descriptors are stored in the AVR's EEPROM memory rather than RAM. + * + * NO_INTERNAL_SERIAL - ( \ref Group_Descriptors ) \n + * Some AVR models contain a unique 20-digit serial number which can be used as the device serial number, while in device mode. This + * allows the host to uniquely identify the device regardless of if it is moved between USB ports on the same computer, allowing + * allocated resources (such as drivers, COM Port number allocations) to be preserved. This is not needed in many apps, and so the + * code that performs this task can be disabled by defining this option and passing it to the compiler via the -D switch. + * + * FIXED_CONTROL_ENDPOINT_SIZE=x - ( \ref Group_EndpointManagement ) \n + * By default, the library determines the size of the control endpoint (when in device mode) by reading the device descriptor. + * Normally this reduces the amount of configuration required for the library, allows the value to change dynamically (if + * descriptors are stored in EEPROM or RAM rather than flash memory) and reduces code maintenance. However, this token can be + * defined to a non-zero value instead to give the size in bytes of the control endpoint, to reduce the size of the compiled + * binary. + * + * DEVICE_STATE_AS_GPIOR - ( \ref Group_Device ) \n + * One of the most frequently used global variables in the stack is the USB_DeviceState global, which indicates the current state of + * the Device State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token + * may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR + * reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except + * implicitly via the library APIs. + * + * FIXED_NUM_CONFIGURATIONS=x - ( \ref Group_Device ) \n + * By default, the library determines the number of configurations a USB device supports by reading the device descriptor. This reduces + * the amount of configuration required to set up the library, and allows the value to change dynamically (if descriptors are stored in + * EEPROM or RAM rather than flash memory) and reduces code maintenance. However, this value may be fixed via this token in the project + * makefile to reduce the compiled size of the binary at the expense of flexibility. + * + * CONTROL_ONLY_DEVICE \n + * In some limited USB device applications, there are no device endpoints other than the control endpoint; i.e. all device communication + * is through control endpoint requests. Defining this token will remove several features related to the selection and control of device + * endpoints internally, saving space. Generally, this is usually only useful in (some) bootloaders and is best avoided. + * + * INTERRUPT_CONTROL_ENDPOINT - ( \ref Group_USBManagement ) \n + * Some applications prefer to not call the USB_USBTask() management task regularly while in device mode, as it can complicate code significantly. + * Instead, when device mode is used this token can be passed to the library via the -D switch to allow the library to manage the USB control + * endpoint entirely via USB controller interrupts asynchronously to the user application. When defined, USB_USBTask() does not need to be called + * when in USB device mode. + * + * NO_DEVICE_REMOTE_WAKEUP - (\ref Group_Device ) \n + * Many devices do not require the use of the Remote Wakeup features of USB, used to wake up the USB host when suspended. On these devices, + * the code required to manage device Remote Wakeup can be disabled by defining this token and passing it to the library via the -D switch. + * + * NO_DEVICE_SELF_POWER - (\ref Group_Device ) \n + * USB devices may be bus powered, self powered, or a combination of both. When a device can be both bus powered and self powered, the host may + * query the device to determine the current power source, via \ref USB_CurrentlySelfPowered. For solely bus powered devices, this global and the + * code required to manage it may be disabled by passing this token to the library via the -D switch. + * + * + * \section Sec_SummaryUSBHostTokens USB Host Mode Driver Related Tokens + * + * This section describes compile tokens which affect USB driver stack of the LUFA library when used in Host mode. + * + * HOST_STATE_AS_GPIOR - ( \ref Group_Host ) \n + * One of the most frequently used global variables in the stack is the USB_HostState global, which indicates the current state of + * the Host State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token + * may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR + * reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except + * implicitly via the library APIs. + * + * USB_HOST_TIMEOUT_MS=x - ( \ref Group_Host ) \n + * When a control transfer is initiated in host mode to an attached device, a timeout is used to abort the transfer if the attached + * device fails to respond within the timeout period. This token may be defined to a non-zero 16-bit value to set the timeout period for + * control transfers, specified in milliseconds. If not defined, the default value specified in Host.h is used instead. + * + * HOST_DEVICE_SETTLE_DELAY_MS=x - ( \ref Group_Host ) \n + * Some devices require a delay of up to 5 seconds after they are connected to VBUS before the enumeration process can be started, or + * they will fail to enumerate correctly. By placing a delay before the enumeration process, it can be ensured that the bus has settled + * back to a known idle state before communications occur with the device. This token may be defined to a 16-bit value to set the device + * settle period, specified in milliseconds. If not defined, the default value specified in Host.h is used instead. + */ + diff --git a/LUFA/ManPages/CompilingApps.txt b/LUFA/ManPages/CompilingApps.txt new file mode 100644 index 0000000..ff34534 --- /dev/null +++ b/LUFA/ManPages/CompilingApps.txt @@ -0,0 +1,30 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_CompilingApps Compiling the Demos, Bootloaders and Projects + * + * The following details how to compile the included LUFA demos, applications and bootloaders using AVR-GCC. + * + * \section Sec_Prerequisites Prerequisites + * Before you can compile any of the LUFA library code or demos, you will need a recent distribution of avr-libc (1.6.2+) + * and the AVR-GCC (4.2+) compiler. For Windows users, the best way to obtain these is the WinAVR project + * (http://winavr.sourceforge.net) as this provides a single-file setup for everything required to compile your + * own AVR projects. + * + * \section Sec_Compiling Compiling a LUFA Application + * Compiling the LUFA demos, applications and/or bootloaders is very simple. LUFA comes with makefile scripts for + * each individual demo, bootloader and project folder, as well as scripts in the /Demos/, /Bootloaders/, /Projects/ + * and the LUFA root directory. This means that compilation can be started from any of the above directories, with + * a build started from an upper directory in the directory structure executing build of all child directories under it. + * This means that while a build inside a particular demo directory will build only that particular demo, a build stated + * from the /Demos/ directory will build all LUFA demo projects sequentially. + * + * To build a project from the source via the command line, the command "make all" should be executed from the command line in the directory + * of interest. To remove compiled files (including the binary output, all intermediately files and all diagnostic output + * files), execute "make clean". Once a "make all" has been run and no errors were encountered, the resulting binary will + * be located in the generated ".HEX" file. If your project makes use of pre-initialized EEPROM variables, the generated ".EEP" + * file will contain the project's EEPROM data. + */ diff --git a/LUFA/ManPages/ConfiguringApps.txt b/LUFA/ManPages/ConfiguringApps.txt new file mode 100644 index 0000000..9ab0c5a --- /dev/null +++ b/LUFA/ManPages/ConfiguringApps.txt @@ -0,0 +1,89 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_ConfiguringApps Configuring the Demos, Bootloaders and Projects + * + * If the target AVR model, clock speed, board or other settings are different from the current settings, they must be changed + * and the project recompiled from the source code before being programmed into the AVR microcontroller. Most project + * configuration options are located in the "makefile" build script inside each LUFA application's folder, however some + * demo or application-specific configuration settings (such as the output format in the AudioOut demo) are located in one or + * more of the source files of the project. See each project's individual documentation for application-specific configuration + * values. + * + * Each project "makefile" contains all the script and configuration data required to compile each project. When opened with + * any regular basic text editor such as Notepad or WordPad (ensure that the save format is a pure ASCII text format) the + * build configuration settings may be altered. + * + * Inside each makefile, a number of configuration variables are located, with the format " = ". For + * each application, the important variables which should be altered are: + * + * - MCU, the target AVR processor + * - BOARD, the target board hardware + * - F_CLOCK, the target raw master clock frequency, before any prescaling is performed + * - F_CPU, the target AVR CPU master clock frequency, after any prescaling + * - CDEFS, the C preprocessor defines which configure options the source code + * - LUFA_PATH, the path to the LUFA library source code + * - LUFA_OPTS, the compile time LUFA options which configure the library features + * + * These values should be changed to reflect the build hardware. + * + * \section Sec_MCU The MCU Parameter + * This parameter indicates the target AVR model for the compiled application. This should be set to the model of the target AVR + * (such as the AT90USB1287, or the ATMEGA32U4), in all lower-case (e.g. "at90usb1287"). Note that not all demos support all the + * USB AVR models, as they may make use of peripherals or modes only present in some devices. + * + * For supported processor models, see \ref Page_DeviceSupport. + * + * \section Sec_BOARD The BOARD Parameter + * This parameter indicates the target AVR board hardware for the compiled application. Some LUFA library drivers are board-specific, + * such as the LED driver, and the library needs to know the layout of the target board. If you are using one of the board models listed + * on the main library page, change this parameter to the board name in all UPPER-case. + * + * If you are not using any board-specific drivers in the LUFA library, or you are using a custom board layout, change this to read + * "USER" (no quotes) instead of a standard board name. If the USER board type is selected and the application makes use of one or more + * board-specific hardware drivers inside the LUFA library, then the appropriate stub drives files should be copied from the /BoardStubs/ + * directory into a /Board/ folder inside the application directory, and the stub driver completed with the appropriate code to drive the + * custom board's hardware. + * + * For boards with built in hardware driver support within the LUFA library, see \ref Page_DeviceSupport. + * + * \section Sec_F_CLOCK The F_CLOCK Parameter + * This parameter indicates the target AVR's input clock frequency, in Hz. This is the actual clock input, before any prescaling is performed. In the + * USB AVR architecture, the input clock before any prescaling is fed directly to the PLL subsystem, and thus the PLL is derived directly from the + * clock input. The PLL then feeds the USB and other sections of the AVR with the correct upscaled frequencies required for those sections to function. + * + * Note that this value does not actually *alter* the AVR's input clock frequency, it is just a way to indicate to the library the clock frequency + * of the AVR as set by the AVR's fuses. If this value does not reflect the actual running frequency of the AVR, incorrect operation of one of more + * library components will occur. + * + * \section Sec_F_CPU The F_CPU Parameter + * This parameter indicates the target AVR's master CPU clock frequency, in Hz. + * + * Note that this value does not actually *alter* the AVR's CPU clock frequency, it is just a way to indicate to the library the clock frequency + * of the AVR core as set by the AVR's fuses. If this value does not reflect the actual running frequency of the AVR, incorrect operation of one of more + * library components will occur. + * + * \section Sec_CDEFS The CDEFS Parameter + * Many applications have features which can be controlled by the defining of specially named preprocessor tokens at the point of compilation - for example, + * an application might use a compile time token to turn on or off optional or mutually exclusive portions of code. Preprocessor tokens can be + * defined here by listing each one with the -D command line switch, and each token can optionally be defined to a specific value. When defined in the + * project makefile, these behave as if they were defined in every source file via a normal preprocessor define statement. + * + * Most applications will actually have multiple CDEF lines, which are concatenated together with the "+=" operator. This ensures that large + * numbers of configuration options remain readable by splitting up groups of options into separate lines. + * + * \section Sec_LUFA_PATH The LUFA_PATH Parameter + * As each LUFA program requires the LUFA library source code to compile correctly, the application must know where the LUFA library is located. This + * value specifies the path to the LUFA library base relative to the path of the project makefile. + * + * \section Sec_LUFA_OPTS The LUFA_OPTS Parameter + * This value is similar to the CDEFS parameter listed elsewhere -- indeed, it is simply a convenient place to group LUFA related tokens away from the + * application's compile time tokens. Normally, these options do not need to be altered to allow an application to compile and run correctly on a + * different board or AVR to the current configuration - if the options are incorrect, then the demo is most likely incompatible with the chosen USB AVR + * model and cannot be made to function through the altering of the makefile settings alone (or at all). Settings such as the USB mode (device, host or both), + * the USB interface speed (Low or Full speed) and other LUFA configuration options can be set here - see \ref Page_TokenSummary documentation for details + * on the available LUFA compile time configuration options. + */ diff --git a/LUFA/ManPages/DevelopingWithLUFA.txt b/LUFA/ManPages/DevelopingWithLUFA.txt new file mode 100644 index 0000000..1b73fa6 --- /dev/null +++ b/LUFA/ManPages/DevelopingWithLUFA.txt @@ -0,0 +1,21 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \page Page_DevelopingWithLUFA Developing With LUFA + * + * This section of the manual contains information on LUFA development, such as Getting Started information, + * information on compile-time tuning of the library and other developer-related sections. + * + * Subsections: + * \li \subpage Page_TokenSummary - Summary of Compile Time Tokens + * \li \subpage Page_Migration - Migrating from an Older LUFA Version + * \li \subpage Page_VIDPID - Allocated USB VID and PID Values + * \li \subpage Page_BuildLibrary - Building as a Linkable Library + * \li \subpage Page_WritingBoardDrivers - How to Write Custom Board Drivers + * \li \subpage Page_SoftwareBootloaderStart - How to jump to the bootloader in software + */ + diff --git a/LUFA/ManPages/DeviceSupport.txt b/LUFA/ManPages/DeviceSupport.txt new file mode 100644 index 0000000..157b8c6 --- /dev/null +++ b/LUFA/ManPages/DeviceSupport.txt @@ -0,0 +1,51 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \page Page_DeviceSupport Device and Hardware Support + * + * Currently supported AVR models: + * - AT90USB82 (USB Device Only) + * - ATMEGA8U2 (USB Device Only) + * - AT90USB162 (USB Device Only) + * - ATMEGA16U2 (USB Device Only) + * - ATMEGA16U4 (USB Device Only) + * - ATMEGA32U2 (USB Device Only) + * - ATMEGA32U4 (USB Device Only) + * - ATMEGA32U6 (USB Device Only) + * - AT90USB646 (USB Device Only) + * - AT90USB647 (USB Host and Device) + * - AT90USB1286 (USB Device Only) + * - AT90USB1287 (USB Host and Device) + * + * Currently supported Atmel boards (see \ref Group_BoardTypes): + * - AT90USBKEY + * - ATAVRUSBRF01 + * - EVK527 + * - RZUSBSTICK + * - STK525 + * - STK526 + * - XPLAIN (Both original first revision board, and newer boards with a different Dataflash model) + * + * Currently supported third-party boards (see \ref Group_BoardTypes for makefile BOARD constant names): + * - Adafruit U4 Breakout Board + * - Arduino Uno + * - Busware BUI + * - Busware CUL V3 + * - Fletchtronics Bumble-B (using officially recommended peripheral layout) + * - Kernel Concepts USBFOO + * - Linnix UDIP + * - MattairTech JM-DB-U2 + * - Maximus USB + * - Minimus USB + * - Olimex AVR-USB-162 + * - PJRC Teensy (all revisions and versions) + * - TCNISO Blackcat USB JTAG + * - Tempusdictum Benito + * - Tom's USBTINY-MKII (all revisions and versions) + * - Any Other Custom User Boards (with Board Drivers if desired, see \ref Page_WritingBoardDrivers) + */ + diff --git a/LUFA/ManPages/DirectorySummaries.txt b/LUFA/ManPages/DirectorySummaries.txt new file mode 100644 index 0000000..d4b862b --- /dev/null +++ b/LUFA/ManPages/DirectorySummaries.txt @@ -0,0 +1,192 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \dir LUFA/Common + * \brief Common library header files. + * + * This folder contains header files which are common to all parts of the LUFA library. They may be used freely in + * user applications. + * + * \dir LUFA/Drivers + * \brief Library hardware and software drivers. + * + * This folder contains all the library hardware and software drivers for each supported board and USB AVR + * microcontroller model. + * + * \dir LUFA/Drivers/Misc + * \brief Miscellaneous driver files. + * + * This folder contains drivers for aspects other than the USB interface, board hardware or AVR peripherals. + * + * \dir LUFA/Drivers/Peripheral + * \brief USB AVR peripheral driver files. + * + * This folder contains drivers for several of the AVR internal peripherals such as the USART, compatible with + * all USB AVR models. + * + * \dir LUFA/Drivers/Peripheral/AVRU4U6U7 + * \brief AT90USBXXX6, AT90USBXXX7 and ATMEGAXXU4 AVR model peripheral driver files. + * + * This folder contains drivers for several of the AVR internal peripherals such as the USART, compatible only with + * the AT90USBXXX6, AT90USBXXX7 and ATMEGAXXU4 USB AVR models, such as the AT90USB1287. Its contents should not be + * included by the user application - the dispatch header file located in the parent directory should be used + * instead. + * + * \dir LUFA/Drivers/USB + * \brief USB controller peripheral driver files. + * + * This folder contains the main header files required to implement the USB interface in the USB supporting AVR models. + * The header files contained directly in this folder should be included in the user application in order to gain USB + * functionality, and the appropriate C source files in the LowLevel and HighLevel driver folders added to the compile + * and link stages. + * + * \dir LUFA/Drivers/USB/LowLevel + * \brief Low level USB driver files. + * + * This folder contains low level USB driver source files required to implement USB functionality on the USB AVR microcontrollers. + * + * \dir LUFA/Drivers/USB/HighLevel + * \brief High level USB driver files. + * + * This folder contains high level USB driver source files required to implement USB functionality on the USB AVR microcontrollers. + * + * \dir LUFA/Drivers/USB/Class + * \brief USB Class helper driver files. + * + * This folder contains drivers for implementing functionality of standardized USB classes. These are not used directly by the library, + * but provide a standard and library-maintained way of implementing functionality from some of the defined USB classes without extensive + * development effort. Is is recommended that these drivers be used where possible to reduce maintenance of user applications. + * + * \dir LUFA/Drivers/USB/Class/Device + * \brief USB Device Class helper driver files. + * + * Device mode drivers for the standard USB classes. + * + * \dir LUFA/Drivers/USB/Class/Host + * \brief USB Host Class helper driver files. + * + * Host mode drivers for the standard USB classes. + * + * \dir LUFA/Drivers/Board + * \brief Board hardware driver files. + * + * This folder contains drivers for interfacing with the physical hardware on supported commercial boards, primarily from + * the Atmel corporation. Header files in this folder should be included in user applications requiring the functionality of + * hardware placed on supported boards. + * + * \dir LUFA/Drivers/Board/USBKEY + * \brief USBKEY board hardware driver files. + * + * This folder contains drivers for hardware on the Atmel USBKEY demonstration board. The header files in this folder should + * not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory + * should be included instead. + * + * \dir LUFA/Drivers/Board/STK526 + * \brief STK526 board hardware driver files. + * + * This folder contains drivers for hardware on the Atmel STK526 development board. The header files in this folder should + * not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory + * should be included instead. + * + * \dir LUFA/Drivers/Board/STK525 + * \brief STK525 board hardware driver files. + * + * This folder contains drivers for hardware on the Atmel STK525 development board. The header files in this folder should + * not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory + * should be included instead. + * + * \dir LUFA/Drivers/Board/RZUSBSTICK + * \brief RZUSBSTICK board hardware driver files. + * + * This folder contains drivers for hardware on the Atmel RZUSBSTICK board, as used in the Atmel "Raven" wireless kits. The header + * files in this folder should not be included directly in user applications; the similarly named dispatch header files located in + * the parent Board directory should be included instead. + * + * \dir LUFA/Drivers/Board/ATAVRUSBRF01 + * \brief ATAVRUSBRF01 board hardware driver files. + * + * This folder contains drivers for hardware on the Atmel ATAVRUSBRF01 board, as used in several Atmel wireless demo kits. The header + * files in this folder should not be included directly in user applications; the similarly named dispatch header files located in + * the parent Board directory should be included instead. + * + * \dir LUFA/Drivers/Board/BUMBLEB + * \brief BUMBLEB board hardware driver files. + * + * This folder contains drivers for hardware on the Fletchtronics Bumble-B board (http://fletchtronics.net/bumble-b). The header + * files in this folder should not be included directly in user applications; the similarly named dispatch header files located in + * the parent Board directory should be included instead. + * + * \dir LUFA/Drivers/Board/XPLAIN + * \brief XPLAIN board hardware driver files. + * + * This folder contains drivers for hardware on the Atmel XPLAIN board (all hardware revisions). The header files in this folder + * should not be included directly in user applications; the similarly named dispatch header files located in the parent Board + * directory should be included instead. + * + * \dir LUFA/Drivers/Board/EVK527 + * \brief XPLAIN board hardware driver files. + * + * This folder contains drivers for hardware on the Atmel EVK527 development board. The header files in this folder should + * not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory + * should be included instead. + * + * \dir LUFA/Drivers/Board/TEENSY + * \brief TEENSY board hardware driver files. + * + * This folder contains drivers for hardware on all revisions of the PJRC Teensy boards (http://www.pjrc.com/teensy/). The header + * files in this folder should not be included directly in user applications; the similarly named dispatch header files located + * in the parent Board directory should be included instead. + * + * \dir LUFA/Drivers/Board/USBTINYMKII + * \brief USBTINY-MKII board hardware driver files. + * + * This folder contains drivers for hardware on all revisions of the USBTINY-MKII boards (http://tom-itx.dyndns.org:81/~webpage/). + * The header files in this folder should not be included directly in user applications; the similarly named dispatch header files + * located in the parent Board directory should be included instead. + * + * \dir LUFA/Drivers/Board/BENITO + * \brief BENITO board hardware driver files. + * + * This folder contains drivers for hardware on the Benito boards (http://dorkbotpdx.org/wiki/benito). The header files in this + * folder should not be included directly in user applications; the similarly named dispatch header files located in the parent + * Board directory should be included instead. + * + * \dir LUFA/Drivers/Board/JMDBU2 + * \brief JM-DB-U2 board hardware driver files. + * + * This folder contains drivers for hardware on the JM-DB-U2 boards (http://u2.mattair.net/). The header files in this folder + * should not be included directly in user applications; the similarly named dispatch header files located in the parent Board + * directory should be included instead. + * + * \dir LUFA/Drivers/Board/OLIMEX162 + * \brief Olimex USB-STK-162 board hardware driver files. + * + * This folder contains drivers for hardware on the Olimex AVR-USB-162 boards (http://www.olimex.com/dev/avr-usb-162.html). + * The header files in this folder should not be included directly in user applications; the similarly named dispatch header files + * located in the parent Board directory should be included instead. + * + * \dir LUFA/Drivers/Board/USBFOO + * \brief USBFOO board hardware driver files. + * + * This folder contains drivers for hardware on the USBFOO boards (http://shop.kernelconcepts.de/product_info.php?products_id=102). + * The header files in this folder should not be included directly in user applications; the similarly named dispatch header files + * located in the parent Board directory should be included instead. + * + * \dir LUFA/CodeTemplates + * \brief Code templates for use in LUFA powered applications. + * + * This contains code templates for board drivers, sample LUFA project makefiles and other similar templates that can be copied into + * a LUFA powered application and modified to speed up development. + * + * \dir LUFA/CodeTemplates/DriverStubs + * \brief Driver stub header files for custom boards, to allow the LUFA board drivers to operate. + * + * This contains stub files for the LUFA board drivers. If the LUFA board drivers are used with board hardware other than those + * directly supported by the library, the BOARD parameter of the application's makefile can be set to "USER", and these stub files + * copied to the "/Board/" directory of the application's folder. When fleshed out with working driver code for the custom board, + * the corresponding LUFA board APIs will work correctly with the non-standard board hardware. + */ + diff --git a/LUFA/ManPages/Donating.txt b/LUFA/ManPages/Donating.txt new file mode 100644 index 0000000..9538982 --- /dev/null +++ b/LUFA/ManPages/Donating.txt @@ -0,0 +1,24 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \page Page_Donating Donating to Support This Project + * + * \image html Author.jpg "Dean Camera, LUFA Developer" + * + * I am a 21 year old University student studying for a double degree in Computer Science and Electronics Engineering. + * The development and support of this library requires much effort from myself, as I am the sole developer, maintainer + * and supporter. Please consider donating a small amount to support this and my future Open Source projects - All + * donations are greatly appreciated. + * + * Note that commercial entities can remove the attribution portion of the LUFA license by a one-time fee - see + * \ref Page_LicenseInfo for more details (Note: Please do NOT pay this in advance through the donation link below - + * contact author for payment details.). + * + * \image html "http://www.pledgie.com/campaigns/6927.png?skin_name=chrome" + * Donate to this project via PayPal - Thanks in Advance! + */ + diff --git a/LUFA/ManPages/FutureChanges.txt b/LUFA/ManPages/FutureChanges.txt new file mode 100644 index 0000000..bfe1528 --- /dev/null +++ b/LUFA/ManPages/FutureChanges.txt @@ -0,0 +1,42 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + + /** \page Page_FutureChanges Future Changes + * + * Below is a list of future changes which are proposed for the LUFA library, but not yet started/complete. + * This gives an unordered list of future changes which may be available in future releases of the library. + * If you have an item to add to this list, please contact the library author via email, the LUFA mailing list, + * or post your suggestion as an enhancement request to the project bug tracker. + * + * Targeted for Future Releases: + * - Code Features + * -# Add hub support when in Host mode for multiple devices + * -# Investigate virtual hubs when in device mode instead of composite devices + * -# Add ability to get number of bytes not written with pipe/endpoint write routines after an error + * -# Change makefiles to allow for absolute LUFA location to be used + * -# Re-add interrupt Pipe/Endpoint support + * -# Add HID report macros to make HID report editing easier + * -# Investigate dynamically created device descriptors + * - Documentation/Support + * -# Add detailed overviews of how each demo works + * -# Add board overviews + * -# Write LUFA tutorials + * - Demos/Projects + * -# Multiple-Report HID device + * -# Device/Host USB bridge + * -# Alternative (USB-IF endorsed) USB-CDC Ethernet Class + * -# Finish Test and Measurement Class demo + * -# Finish BluetoothHost demo + * -# Finish SideShow demo + * -# Finish StandaloneProgrammer project + * -# Arduino Uno compatible USB-MIDI, USB-HID + * -# Make Webserver project work in RNDIS device mode + * - Ports + * -# AVR32 UC3B series microcontrollers + * -# Atmel ARM7 series microcontrollers + * -# Other (commercial) C compilers + */ + diff --git a/LUFA/ManPages/GettingStarted.txt b/LUFA/ManPages/GettingStarted.txt new file mode 100644 index 0000000..cc936ab --- /dev/null +++ b/LUFA/ManPages/GettingStarted.txt @@ -0,0 +1,27 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_GettingStarted Getting Started + * + * Out of the box, LUFA contains a large number of pre-made class demos for you to test, experiment with and + * ultimately build upon for your own projects. All the demos (where possible) come pre-configured to build and + * run correctly on the AT90USB1287 AVR microcontroller, mounted on the Atmel USBKEY board and running at an 8MHz + * master clock. This is due to two reasons; one, it is the hardware the author possesses, and two, it is the most + * popular Atmel USB demonstration board to date. To learn how to reconfigure, recompile and program the included + * LUFA applications using different settings, see the subsections below. + * + * Most of the included demos in the /Demos/ folder come in both ClassDriver and LowLevel varieties. If you are new + * to LUFA, it is highly recommended that you look at the ClassDriver versions first, which use the pre-made USB + * Class Drivers (\ref Group_USBClassDrivers) to simplify the use of the standard USB classes in user applications. + * + * For an overview of the included library applications, bootloaders and demos, see \ref Page_LibraryApps. + * + * Subsections: + * \li \subpage Page_ConfiguringApps - How to Configure the Included Demos, Projects and Bootloaders + * \li \subpage Page_CompilingApps - How to Compile the Included Demos, Projects and Bootloaders + * \li \subpage Page_ProgrammingApps - How to Program an AVR with the Included Demos, Projects and Bootloaders + */ + diff --git a/LUFA/ManPages/Groups.txt b/LUFA/ManPages/Groups.txt new file mode 100644 index 0000000..c1c4a43 --- /dev/null +++ b/LUFA/ManPages/Groups.txt @@ -0,0 +1,21 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** @defgroup Group_BoardDrivers Board Drivers + * + * Functions, macros, variables, enums and types related to the control of physical board hardware. + */ + +/** @defgroup Group_PeripheralDrivers On-chip Peripheral Drivers + * + * Functions, macros, variables, enums and types related to the control of AVR subsystems. + */ + +/** @defgroup Group_MiscDrivers Miscellaneous Drivers + * + * Miscellaneous driver Functions, macros, variables, enums and types. + */ + diff --git a/LUFA/ManPages/LUFA.png b/LUFA/ManPages/LUFA.png new file mode 100644 index 0000000..54fa1a6 Binary files /dev/null and b/LUFA/ManPages/LUFA.png differ diff --git a/LUFA/ManPages/LUFAPoweredProjects.txt b/LUFA/ManPages/LUFAPoweredProjects.txt new file mode 100644 index 0000000..17fbfd4 --- /dev/null +++ b/LUFA/ManPages/LUFAPoweredProjects.txt @@ -0,0 +1,95 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_LUFAPoweredProjects User Projects Powered by LUFA + * + * LUFA is currently in use all around the world, in many applications both commercial and non-commercial. Below is a + * list of known public LUFA powered projects, which all use the LUFA library in some way. Feel free to visit each project's + * home page for more information on each project. + * + * If you have a project that you would like to add to this list, please contact me via the details on the main page of this + * documentation. + * + * \section Sec_BoardsUsingLUFA AVR-USB Development Boards Using LUFA + * + * The following is a list of known AVR USB development boards, which recommend using LUFA for the USB stack. Some of these + * are open design, and all are available for purchase as completed development boards suitable for project development. + * + * - AVR-USB-162, a USBKEY-like development board for the AT90USB162: http://olimex.com/dev/avr-usb-162.html + * - Benito #7, a no-frills USB board: http://www.dorkbotpdx.org/wiki/benito + * - JM-DB-U2, an ATMEGA32U2 development board: http://u2.mattair.net/index.html + * - Micropendous, an open design/source set of AVR USB development boards: http://micropendous.org/ + * - Microsin AVR-USB162 breakout board, a DIY AT90USB162 development board: http://microsin.ru/content/view/685/44/ + * - Minimus USB, a board specially designed for PSGroove: http://www.minimususb.com/ + * - Nanduino, a do-it-yourself AT90USB162 board: http://www.makestuff.eu/wordpress/?page_id=569 + * - Teensy and Teensy++, two other AVR USB development boards: http://www.pjrc.com/teensy/index.html + * - U2DIL/U4DIL, a set of DIP layout USB AVR boards: http://www.reworld.eu/re/en/products/u2dil/ + * - USBFOO 2, AT90USB162 based development board: http://shop.kernelconcepts.de/product_info.php?products_id=102 + * + * \section Sec_LUFAProjects Projects Using LUFA (Hobbyist) + * + * The following are known hobbyist projects using LUFA. Most are open source, and show off interesting ways that the LUFA library + * can be incorporated into many different applications. + * + * - Accelerometer Game Joystick: http://www.crictor.co.il/he/episodes/joystick/ + * - Arcade Controller: http://fletchtronics.net/arcade-controller-made-petunia + * - AVR USB Modem, a 3G Wireless Modem host: http://code.google.com/p/avrusbmodem/ + * - Bicycle POV: http://www.code.google.com/p/bicycleledpov/ + * - Bus Ninja, an AVR clone of the popular BusPirate project: http://blog.hodgepig.org/busninja/ + * - CAMTRIG, a remote Camera Trigger device: http://code.astraw.com/projects/motmot/camtrig + * - CD Driver Emulator Dongle for ISO Files: http://cdemu.blogspot.com/ + * - ClockTamer, a configurable clock generator: http://code.google.com/p/clock-tamer/ + * - EMUCOMBOX, a USB-RS422 adapter for E-Mu Emax samplers: http://users.skynet.be/emxp/EMUCOMBOX.htm + * - Estick JTAG, an ARM JTAG debugger: http://code.google.com/p/estick-jtag/ + * - "Fingerlicking Wingdinger" (WARNING: Bad Language if no Javascript), a MIDI controller: http://noisybox.net/electronics/wingdinger/ + * - Garmin GPS USB to NMEA standard serial sentence translator: http://github.com/nall/garmin-transmogrifier/tree/master + * - Generic HID Device Creator: http://generichid.sourceforge.net/ + * - Ghetto Drum, a MIDI drum controller: http://noisybox.net/art/gdrum/ + * - IR Remote to Keyboard decoder: http://netzhansa.blogspot.com/2010/04/our-living-room-hi-fi-setup-needs-mp3.html + * - LED Panel controller: http://projects.peterpolidoro.net/caltech/panelscontroller/panelscontroller.htm + * - PSGroove, a Playstation 3 Homebrew dongle: http://github.com/psgroove + * - Single LED Matrix Display: http://guysoft.wordpress.com/2009/10/08/bumble-b/ + * - Linux Secure Storage Dongle: http://github.com/TomMD/teensy + * - MakeTV Episode Dispenser: http://www.youtube.com/watch?v=BkWUi18hl3g + * - MidiMonster, a USB-to-MIDI gateway board: http://www.dorkbotpdx.org/wiki/midimonster + * - Mobo 4.3, a USB controlled all band (160-10m) HF SDR transceiver: http://sites.google.com/site/lofturj/mobo4_3 + * - NES Controller USB modification: http://projects.peterpolidoro.net/video/NESUSB.htm + * - Opendous-JTAG, an open source ARM JTAG debugger: http://code.google.com/p/opendous-jtag/ + * - Openkubus, an open source hardware-based authentication dongle: http://code.google.com/p/openkubus/ + * - Orbee, a USB connected RGB Orb for notifications: http://www.franksworkshop.com.au/Electronics/Orbee/Orbee.htm + * - Programmable XBOX controller: http://richard-burke.dyndns.org/wordpress/pan-galactic-gargantuan-gargle-brain-aka-xbox-360-usb-controller/ + * - Reprap with LUFA, a LUFA powered 3D printer: http://code.google.com/p/at90usb1287-code-for-arduino-and-eclipse/ + * - SD Card reader: http://elasticsheep.com/2010/04/teensy2-usb-mass-storage-with-an-sd-card/ + * - SEGA Megadrive/Genesis Development Cartridge: http://www.makestuff.eu/wordpress/?page_id=398 + * - Stripe Snoop, a Magnetic Card reader: http://www.ossguy.com/ss_usb/ + * - Teensy SD Card .WAV file player: http://elasticsheep.com/2010/04/teensy2-usb-wav-player-part-1/ + * - Touchscreen Input Device: http://capnstech.blogspot.com/2010/07/touchscreen-update.html + * - USB Interface for Playstation Portable Devices: http://forums.ps2dev.org/viewtopic.php?t=11001 + * - Userial, a USB to Serial converter with SPI, I2C and other protocols: http://www.tty1.net/userial/ + * - XUM1541, a Commodore 64 floppy drive to USB adapter: http://www.root.org/~nate/c64/xum1541/ + * + * \section Sec_LUFACommercialProjects Projects Using LUFA (Commercial) + * + * The following is a list of known commercial products using LUFA. Some of these are open source, although many are "black-box" + * solutions with no source code given. + * + * - Arduino Uno, the official Arduino board: www.arduino.cc + * - ARPS Locator: http://la3t.hamradio.no/lab//?id=tracker_en + * - Digital Survey Instruments Magnetometer and Pointer: http://www.digitalsurveyinstruments.com/ + * - Penguino, an Arduino Board With On-Board LUFA Powered Debugger/Programmer: http://wiki.icy.com.au/PenguinoAVR + * - PIR-1, an IR control interface for consumer electronics: http://www.promixis.com/pir-1.php + * - Many of Busware's Products: http://www.busware.de/ + * - MIDIFighter, a USB-MIDI controller: http://www.midifighter.com/ + * - Retrode, a USB Games Console Cartridge Reader: http://www.retrode.org + * - USBTINY-MKII, an AVRISP-MKII Clone AVR Programmer: http://tom-itx.dyndns.org:81/~webpage/boards/USBTiny_Mkii/USBTiny_Mkii_index.php + * - XMEGA Development Board, using LUFA as an On-Board Programmer: http://xmega.mattair.net/ + * + * \section Sec_LUFAPublications Publications Mentioning LUFA + * - Elektor Magazine, "My First AVR-USB" by Antoine Authier (feature), January 2010 Issue + * - Elektor Magazine, "USB is Cool/Sucks" by Jerry Jacobs and Chris Vossen (minor mention), January 2010 Issue + * - Elektor Magazine, "20 x Open Source" by Jens Nickel, March 2010 Issue + * - Circuit Cellar Magazine, "Advanced USB Design Debugging" by Collin O'Flynn, August 2010 Issue + */ diff --git a/LUFA/ManPages/LUFAvsAtmelStack.txt b/LUFA/ManPages/LUFAvsAtmelStack.txt new file mode 100644 index 0000000..97035b5 --- /dev/null +++ b/LUFA/ManPages/LUFAvsAtmelStack.txt @@ -0,0 +1,46 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \page Page_LUFAvsAtmelStack LUFA vs the Atmel Stack + * + * Atmel offers an official USB AVR stack, which may be incorporated into user projects and products. As LUFA and the Atmel + * stack aims to give roughly the same functionality to a design, it is often asked what advantages LUFA carries over the + * official Atmel USB stack. Below are just some of the advantages to choosing LUFA over the official stack. + * + * - Licensing: + * LUFA is released under a very permissive MIT license (see \ref Page_LicenseInfo), while the Atmel stack carries several + * restrictions as to how and where it can be used. LUFA's licensing should be suitable for both Commercial and Non-Commercial + * entities alike. + * + * - Demos and Projects: + * Unlike the Atmel stack, LUFA comes with many different Device and Host mode Demos and Projects ready to run out of the box. + * Atmel favors separate downloads for each of their (small set) of USB AVR demos, which requires more time and offers less + * to the end-user. LUFA also contains several open source Bootloaders, which can be modified as the user wishes to suit his or + * her application, instead of being forced to use Atmel's single prebuilt (closed-source) DFU bootloader. + * + * - Central Library Code: + * LUFA is designed to allow the central library core code to be shared amongst several projects, so long as the compiled object + * files are cleaned between different projects. This is in direct contrast to the Atmel library, which is strongly coupled to the + * project it is integrated with. Using LUFA allows for only one copy of the library core to be needed for all applications, and + * makes updating the library used in all projects a trivial copy-and-paste process. + * + * - Clean API: + * One of the main design goals of LUFA is to make the API easy to use. While LUFA is a fluid project which has undergone many + * API improvements, the API is arguably much nicer to use and easier to understand than the equivalent Atmel stack code. LUFA's + * API is also more complete than the Atmel stack, and contains many features to speed up application development. + * + * - Full Hardware Support: + * LUFA supports the full range of Atmel's USB AVR microcontrollers (see \ref Page_DeviceSupport), with porting between chips being + * as simple as a single compile switch in many cases. Atmel's stack requires different libraries to be used based on the USB AVR + * microcontroller series, complicating the process of moving between USB AVR models. In addition, LUFA contains drivers for all the + * hardware contained on Atmel's USB AVR based boards, so you can get started quickly and easily. + * + * - Better Library Support: + * As many people are now using LUFA, there is a community being built around it. You can get answers to your LUFA related questions + * quickly by either emailing the library author (subject to author's schedule) or by posting to the official LUFA support mailing list. + */ + diff --git a/LUFA/ManPages/LibraryApps.txt b/LUFA/ManPages/LibraryApps.txt new file mode 100644 index 0000000..1de0ea7 --- /dev/null +++ b/LUFA/ManPages/LibraryApps.txt @@ -0,0 +1,116 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_LibraryApps Included Library Applications + * + * The LUFA library ships with several different host and device demos, located in the /Demos/ subdirectory. Within this + * directory the demos are separated by USB mode (Device, Host, OTG) and further separated by the use or non-use of the + * library USB Class drivers (which abstract out the actual implementation of the USB classes to simplify development even + * further at the expense of a loss of flexibility). + * + * With one or two exceptions (e.g. proprietary classes such as RNDIS) all the included demos will work across all OSes without + * the need for special drivers. On Windows, some demos require the supplied .INF file to be used as the device driver, which + * directs the OS to use its inbuilt class drivers for the device. + * + * Also included with the library are two fully functional bootloaders, located in the /Bootloaders/ subdirectory. + * The DFU class bootloader is compatible with Atmel's FLIP software or the open source dfu-programmer project, while + * the CDC class (AVR109 protocol) is compatible with such open source software as AVRDUDE and AVR-OSP. + * + * User-submitted projects are located in the /Projects/ subdirectory. If you wish to have your LUFA project included, + * please email it to the Library author. + * + * \section Sec_AppOverview Overview of Included Library Applications + * The following shows the folder structure of the included library applications, including demos, bootloaders and user-submitted + * open source projects. + * + * + * + * - Demos + * - Device + * - ClassDriver + * - AudioInput - Audio In (microphone) demo, using the library USB Audio Class driver framework + * - AudioOutput - Audio Out (speaker) demo, using the library USB Audio Class driver framework + * - DualVirtualSerial - Dual Virtual Serial Port demo, using the library USB CDC Class driver framework + * - GenericHID - Generic Human Interface Class demo, using the library USB HID Class driver framework + * - Joystick - USB Joystick demo, using the library USB HID Class driver framework + * - Keyboard - USB Keyboard demo, using the library USB HID Class driver framework + * - KeyboardMouse - Dual Keyboard/Mouse demo, using the library USB HID Class driver framework + * - MassStorage - Dual Drive Mass Storage demo, using the library USB Mass Storage Class driver framework + * - MassStorageKeyboard - Mass Storage and Keyboard demo, using the library USB Mass Storage/HID Class driver frameworks + * - MIDI - MIDI In demo, using the library USB MIDI-Audio Class driver framework + * - Mouse - USB Mouse demo, using the library USB HID driver framework + * - RNDISEthernet - RNDIS Ethernet Webserver demo, using the library USB RNDIS driver framework + * - VirtualSerial - Virtual Serial Port demo, using the library USB CDC Class driver framework + * - VirtualSerialMouse - Virtual Serial Port and Mouse demo, using the library USB CDC and HID Class driver frameworks + * - LowLevel + * - AudioInput - Audio In (microphone) demo, using the low level LUFA APIs to implement the USB Audio class + * - AudioOutput - Audio Out (speaker) demo, using the low level LUFA APIs to implement the USB Audio class + * - DualVirtualSerial - Dual Virtual Serial Port demo, using the low level LUFA APIs to implement the USB CDC class + * - GenericHID - Generic Human Interface Class demo, using the low level LUFA APIs to implement the USB HID class + * - Joystick - USB Joystick demo, using the low level LUFA APIs to implement the USB HID class + * - Keyboard - USB Keyboard demo, using the low level LUFA APIs to implement the USB HID class + * - KeyboardMouse - Dual Keyboard/Mouse demo, using the low level LUFA APIs to implement the USB HID class + * - MassStorage - Dual Drive Mass Storage demo, using the low level LUFA APIs to implement the USB Mass Storage class + * - MIDI - MIDI In demo, using the low level LUFA APIs to implement the USB MIDI-Audio class + * - Mouse - USB Mouse demo, using the low level LUFA APIs to implement the USB HID class + * - RNDISEthernet - RNDIS Ethernet Webserver demo, using the low level LUFA APIs to implement the USB RNDIS class + * - VirtualSerial - Virtual Serial Port demo, using the low level LUFA APIs to implement the USB CDC class + * - Incomplete + * - SideShow - Incomplete Windows SideShow demo, using the low level LUFA APIs to implement the USB SideShow class + * - TestAndMeasurement - Incomplete Test and Measurement demo, using the low level LUFA APIs to implement the USB Test and + * Measurement class + * - Host + * - ClassDriver + * - JoystickHostWithParser - Joystick host demo with HID Descriptor parser, using the library USB HID Class driver framework + * - KeyboardHost - USB Keyboard host demo, using the library USB HID Class driver framework + * - KeyboardHostWithParser - USB Keyboard host demo with HID Descriptor parser, using the library USB HID Class + * driver framework + * - MassStorageHost - Mass Storage host demo, using the library USB Mass Storage Class driver framework + * - MouseHost - Mouse host demo, using the library USB HID Class driver framework + * - MouseHostWithParser - Mouse host demo with HID Descriptor parser, using the library USB HID Class driver framework + * - RNDISHost - RNDIS Ethernet host demo, using the library USB RNDIS Class driver framework + * - StillImageHost - Still Image Camera host demo, using the library USB Still Image Class driver framework + * - VirtualSerialHost - Virtual Serial Port host demo, using the library USB CDC Class driver framework + * - LowLevel + * - JoystickHostWithParser - Joystick host demo with HID Descriptor parser, using the low level LUFA APIs to implement + * the USB HID class + * - GenericHIDHost - Generic HID host demo, using the low level LUFA APIs to implement the USB HID class + * - KeyboardHost - USB Keyboard host demo, using the low level LUFA APIs to implement the USB HID class + * - KeyboardHostWithParser - USB Keyboard host demo with HID Descriptor parser, using the low level LUFA APIs to + * implement the USB HID class + * - MassStorageHost - Mass Storage host demo, using the low level LUFA APIs to implement the USB Mass Storage class + * - MouseHost - Mouse host demo, using the low level LUFA APIs to implement the USB HID class + * - MouseHostWithParser - Mouse host demo with HID Descriptor parser, using the low level LUFA APIs to implement the + * USB HID class + * - PrinterHost - Printer host demo, using the low level LUFA APIs to implement the USB Printer class + * - RNDISHost - RNDIS Ethernet host demo, using the low level LUFA APIs to implement the RNDIS class + * - StillImageHost - Still Image Camera host demo, using the low level LUFA APIs to implement the USB Still Image class + * - VirtualSerialHost - Virtual Serial Port host demo, using the low level LUFA APIs to implement the USB CDC class + * - Incomplete + * - BluetoothHost - Incomplete Bluetooth host demo, using the low level LUFA APIs to implement the USB Bluetooth class + * - DualRole + * - ClassDriver + * - MouseHostDevice - Dual role Mouse Host and Mouse Device demo, using the library USB CDC Class driver framework + * - Bootloaders + * - DFU - DFU Class USB bootloader, compatible with Atmel's FLIP and the open source dfu-programmer software + * - CDC - CDC Class USB bootloader, compatible with any AVR910 protocol programming software such as AVRDude + * - Projects + * - AVRISP-MKII - AVRISP-MKII Programmer Clone project + * - Benito - Benito Board Arduino Programmer project + * - LEDNotifier - USB LED Notification project + * - Magstripe - Magnetic Stripe Card Reader project + * - MissileLaucher - Toy Missile Launcher Host project + * - RelayBoard - Relay board controller, controllable via the "sismpctl" Linux application + * - TempDataLogger - Temperature Datalogging project, using the FatFS library + * - USBtoSerial - USB to USART Serial Converter project + * - Webserver - RNDIS Host Webserver with DHCP client, powered by uIP TCP/IP stack project and FatFS library + * - XPLAINBridge - XPLAIN alternative PDI Programmer/USB to Serial Bridge firmware project + * - Incomplete + * - StandaloneProgrammer - Incomplete Standalone AVR Programmer application, to program AVRs directly from a Mass Storage disk + * + * + */ + diff --git a/LUFA/ManPages/LibraryResources.txt b/LUFA/ManPages/LibraryResources.txt new file mode 100644 index 0000000..eef36d9 --- /dev/null +++ b/LUFA/ManPages/LibraryResources.txt @@ -0,0 +1,32 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \page Page_Resources Library Resources + * + * \section Sec_ProjectPages LUFA Related Webpages + * Project Homepage: http://www.lufa-lib.org \n + * Commercial Licenses: http://www.lufa-lib.org/license \n + * Author's Website: http://www.fourwalledcubicle.com \n + * Development Blog: http://www.fourwalledcubicle.com/blog \n + * + * \section Sec_ProjectHelp Assistance With LUFA + * Discussion Group: http://www.lufa-lib.org/support \n + * Author's Email: dean [at] fourwalledcubicle [dot] com + * Author's Skype: abcminiuser + * + * \section Sec_InDevelopment Latest In-Development Source Code + * Issue Tracker: http://www.lufa-lib.org/tracker \n + * Bazaar Access: http://www.lufa-lib.org/bzr \n + * SVN Access: http://www.lufa-lib.org/svn \n + * Git Access: http://www.lufa-lib.org/git \n + * Latest Repository Source Archive: http://www.lufa-lib.org/latest-archive \n + * Commit RSS Feed: http://www.lufa-lib.org/rss \n + * + * \section Sec_USBResources USB Resources + * USB-IF Website: http://www.usb.org \n + */ + diff --git a/LUFA/ManPages/LicenseInfo.txt b/LUFA/ManPages/LicenseInfo.txt new file mode 100644 index 0000000..091ce94 --- /dev/null +++ b/LUFA/ManPages/LicenseInfo.txt @@ -0,0 +1,22 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \page Page_LicenseInfo Source Code License + * + * The LUFA library is currently released under the MIT license, included below. + * + * Commercial entities can opt out of the public disclosure clause in this license + * for a one-time US$1500 payment. This provides a non-exclusive modified MIT licensed which + * allows for the free use of the LUFA library, bootloaders and (where the sole copyright + * is attributed to Dean Camera) demos without public disclosure within an organization, in + * addition to three free hours of consultation with the library author, and priority support. + * Please visit the Commercial License link on \ref Page_Resources for more information on + * ordering a commercial license for your company. + * + * \verbinclude License.txt + */ + diff --git a/LUFA/ManPages/MainPage.txt b/LUFA/ManPages/MainPage.txt new file mode 100644 index 0000000..d5935c2 --- /dev/null +++ b/LUFA/ManPages/MainPage.txt @@ -0,0 +1,48 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \mainpage + * + * \image html LUFA.png + *
Logo design by Ryo Photography
+ * \n + *
http://www.lufa-lib.org
+ * \n + * + * LUFA is donationware. For author and donation information, see \ref Page_Donating. + * + * LUFA is an open-source USB library for the USB-enabled AVR microcontrollers, released under the MIT license (see \ref Page_LicenseInfo). + * It supports a large number of USB AVR models and boards (see \ref Page_DeviceSupport). It is designed to provide an easy to use, + * feature rich framework for the development of USB peripherals and hosts. + * + * LUFA focuses on the microcontroller side of USB development only; it includes no PC host USB driver development facilities - other projects + * such as the Windows Driver Development Kit, Windows USB Device Mode Framework and libusb may be of interest for developing custom OS drivers. + * While custom USB devices can be made with LUFA using such tools, the included demos all use the inbuilt OS drivers for each USB class for + * simplicity. + * + * The library is currently in a stable release, suitable for download and incorporation into user projects for + * both host and device modes. For information about the project progression, see the blog link at \ref Page_Resources. + * + * LUFA is written specifically for the free AVR-GCC compiler, and uses several GCC-only extensions to make the + * library API more streamlined and robust. You can download AVR-GCC for free in a convenient windows package, + * from the the WinAVR website (see \ref Page_Resources). + * + * The only required AVR peripherals for LUFA is the USB controller itself and interrupts - LUFA does not require the use of the + * microcontroller's timers or other hardware, leaving more hardware to the application developer. + * + * Accompanying LUFA in the download package is a set of example demo applications, plus several Bootloaders of different classes + * and open source LUFA powered projects. + * + * Subsections: + * \li \subpage Page_WhyUseLUFA - What are the advantages of using LUFA? + * \li \subpage Page_LUFAvsAtmelStack - How does LUFA compare to the Atmel USB AVR stack? + * \li \subpage Page_AlternativeStacks - Alternative USB AVR Stacks + * \li \subpage Page_LicenseInfo - Project source license and commercial use information + * \li \subpage Page_Donating - Donating to support this project + * \li \subpage Page_LibraryApps - Overview of included Demos, Bootloaders and Projects + */ + diff --git a/LUFA/ManPages/MigrationInformation.txt b/LUFA/ManPages/MigrationInformation.txt new file mode 100644 index 0000000..be5e949 --- /dev/null +++ b/LUFA/ManPages/MigrationInformation.txt @@ -0,0 +1,564 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_Migration Migrating from Older Versions + * + * Below is migration information for updating existing projects based on previous versions of the LUFA library + * to the next version released. It does not indicate all new additions to the library in each version change, only + * areas relevant to making older projects compatible with the API changes of each new release. + * + * \section Sec_Migration101122 Migrating from 100807 to 101122 + * USB Core + * - A new USB driver source file, Drivers/USB/HighLevel/EndpointStream.c now exists. This source file should be added + * to all project makefiles using the USB driver of LUFA, or the makefile should be updated to use the new module source + * variables. + * - A new USB driver source file, Drivers/USB/HighLevel/PipeStream.c now exists. This source file should be added to all + * project makefiles using the USB driver of LUFA, or the makefile should be updated to use the new module source variables. + * - The EVENT_USB_InitFailure() event has been removed, as the USB_Init() function will no longer fail; if not USB mode is + * specified, the controller will default to UID selection mode. + * - The USB mode specifier constants have been moved into a new enum and renamed. Existing projects should use the equivalent + * value in the new \ref USB_Modes_t enum. + * - All class driver headers are now included as part of the standard LUFA/Drivers/USB/USB.h master dispatch header, and should + * no longer be included seperately. Class driver module source files must still be added as a seperate module in the project's + * makefile if used. + * + * Device Mode + * - Endpoints MUST be allocated in ascending order to ensure that bank corruption does not occur. Ensure that your user application + * allocated endpoints in ascending order - or if your application uses the USB device mode class drivers, ensure that each instance's + * endpoint indexes are not overlapped with other interface's endpoints. + * - The signature for the CALLBACK_USB_GetDescriptor() callback has changed, the "void** const DescriptorAddress" parameter is + * now "const void** const DescriptorAddress". Existing applications should update their callback signatures to match this, and + * eliminate any casting of descriptor pointers to a non-const pointer. + * - The names of the class specific descriptor type defines in the USB Class drivers have changed - refer to the driver documentation + * for each class driver for the new class specific descriptor type names. + * - The ENDPOINT_DOUBLEBANK_SUPPORTED() macro is has been renamed \ref ENDPOINT_BANKS_SUPPORTED() and now returns the total number of + * banks supported by the given endpoint. Existing code should switch to the new naming scheme, and test that the return value of the + * macro is equal to or greated than 2 to regain the previous functionality. + * - The EVENT_USB_Device_UnhandledControlRequest() event is now named \ref EVENT_USB_Device_ControlRequest() and fires before (not after) + * the internal library event handlers. Existing code should rename the event handlers in the user application to match the new event + * name, and should ensure that the new execution order does not affect the application's operation. + * + * Host Mode + * - Pipes MUST be allocated in ascending order to ensure that bank corruption does not occur. Ensure that your user application + * allocated pipes in ascending order - or if your application uses the USB host mode class drivers, ensure that each instance's + * pipe indexes are not overlapped with other interface's pipes. + * - The PRNT_Host_SendData() function has been renamed to \ref PRNT_Host_SendString(). Existing applications should simply + * replace all references to the obsolete function name with the new function name. + * - The names of the class specific descriptor type defines in the USB Class drivers have changed - refer to the driver documentation + * for each class driver for the new class specific descriptor type names. + * - The Still Image Host class' function prefix has been changed from "SImage_" to "SI_", to remain consistent with the rest of the + * driver's enums, type defines and constants. + * + * \section Sec_Migration100807 Migrating from 100513 to 100807 + * + * Non-USB Library Components + * - The Dataflash board driver stub file has changed, as dataflash functions previously located in the internal + * Dataflash driver of the library have now been moved to the individual board files. Existing drivers can + * copy-paste the new functions from the board Dataflash stub driver. + * + * USB Core + * - A new USB driver source file, Drivers/USB/LowLevel/Device.c now exists. This source file should be added to all project + * makefiles using the USB driver of LUFA, or the makefile should be updated to use the new module source variables. + * - The Drivers/USB/LowLevel/DevChapter9.c source file has moved to Drivers/USB/HighLevel/DeviceStandardReq.c - this should + * be updated in all project makefiles, or the makefile should be updated to use the new module source variables. + * - The Drivers/USB/LowLevel/HostChapter9.h source file has moved to Drivers/USB/HighLevel/HostStandardReq.c - this should + * be updated in all project makefiles, or the makefile should be updated to use the new module source variables. + * - The Drivers/USB/LowLevel/LowLevel.c source file has moved to Drivers/LowLevel/USBController.c - this should be updated + * in all project makefiles, or the makefile should be updated to use the new module source variables. + * + * Device Mode + * - The USB_Device_IsRemoteWakeupSent() macro has been removed, as the remote wakeup request is now fully handled by the + * enhanced \ref USB_Device_SendRemoteWakeup() function. Existing code may now discard any checks to USB_Device_IsRemoteWakeupSent(). + * - The USB_Device_IsUSBSuspended() macro has been removed, as it is obsolete. Existing code should compare \ref USB_DeviceState + * to see if it the device is in the \ref DEVICE_STATE_Suspended state instead. + * - The \ref CDC_Device_ReceiveByte() function has changed, and now returns a signed 16-bit integer, with -1 indicating no data was + * received. This allows for more efficient coding, as a call to \ref CDC_Device_BytesReceived() is no longer needed if the exact + * number of queued bytes received is not needed. + * + * Host Mode + * - The \ref CDC_Host_ReceiveByte() function has changed, and now returns a signed 16-bit integer, with -1 indicating no data was + * received. This allows for more efficient coding, as a call to \ref CDC_Device_BytesReceived() is no longer needed if the exact + * number of queued bytes received is not needed. + * - The \ref CDC_Host_USBTask() now calls \ref CDC_Host_Flush() automatically, flushing any queued data to the attached device. Manual + * flushing of the interface is no longer needed if the flushes should be in sync with calls to \ref CDC_Host_USBTask(). + * + * \section Sec_Migration100513 Migrating from 100219 to 100513 + * + * Non-USB Library Components + * - The \ref TWI_StartTransmission() function now takes in a timeout period, expressed in milliseconds, within which the addressed + * device must respond or the function will abort. + * + * Device Mode + * - The \ref USB_Init() function no longer calls sei() to enable global interrupts, as the user application may need + * to perform other initialization before it is ready to handle global interrupts. The user application is now responsible + * for enabling global interrupts before or shortly after calling \ref USB_Init() to ensure that the enumeration process + * functions correctly. + * - The USBInterrupt.c USB driver source file has been relocated from LUFA/Drivers/USB/HighLevel/ to LUFA/Drivers/USB/LowLevel. + * Projects must update their makefile SRC values accordingly. + * - The HID Device Class driver's function signature for the CALLBACK_HID_Device_ProcessHIDReport() function has been changed, to + * allow for a new ReportType parameter. This new parameter must be added in all user applications using the Device mode HID Class + * Driver, but may be ignored unless Host-to-Device FEATURE HID reports are used. + * + * Host Mode + * - The \ref USB_Init() function no longer calls sei() to enable global interrupts, as the user application may need + * to perform other initialization before it is ready to handle global interrupts. The user application is now responsible + * for enabling global interrupts before or shortly after calling \ref USB_Init() to ensure that the enumeration process + * functions correctly. + * - The USBInterrupt.c USB driver source file has been relocated from LUFA/Drivers/USB/HighLevel/ to LUFA/Drivers/USB/LowLevel. + * Projects must update their makefile SRC values accordingly. + * - The HID Host Class driver's function signature for the HID_Host_SendReportByID() function has been changed, to allow for a new + * ReportType parameter. Existing calls to this function should substitute REPORT_ITEM_TYPE_Out as this parameter's value. + * + * \section Sec_Migration100219 Migrating from 091223 to 100219 + * + * Non-USB Library Components + * - Due to some ADC channels not being identical to their ADC MUX selection masks for single-ended conversions on some AVR models, + * the ADC driver now has explicit masks for each of the standard ADC channels (see \ref Group_ADC). These masks should be used + * when calling the ADC functions to ensure proper operation across all AVR models. Note that the \ref ADC_SetupChannel() function + * is an exception, and should always be called with a channel number rather than a channel mask. + * + * Host Mode + * - The MIDI Host Class driver send and receive routines now operate on packed events, where multiple MIDI events may be + * packed into a single USB packet. This means that the sending of MIDI events will now be delayed until the MIDI send + * pipe bank is full. To override this new behaviour and revert to the previous behaviour, the user application may manually + * flush the queued event(s) to the device by calling \ref MIDI_Host_Flush(). + * - The Pipe_IsEndpointBound() function now takes the endpoint's direction into account, by checking if the MSB of the endpoint's address + * is set to denote IN endpoints. If the previous functionality where the direction is to be discounted is required, mask the endpoint + * address against the \ref PIPE_EPNUM_MASK token before calling Pipe_IsEndpointBound(). + * + * Device Mode + * - The MIDI Device Class driver send and receive routines now operate on packed events, where multiple MIDI events may be + * packed into a single USB packet. This means that the sending of MIDI events will now be delayed until the MIDI send + * endpoint bank is full. To override this new behaviour and revert to the previous behaviour, the user application may manually + * flush the queued event(s) to the host by calling \ref MIDI_Device_Flush(). + * + * \section Sec_Migration091223 Migrating from 091122 to 091223 + * + * Host Mode + * - The Still Image Host Class driver SI_Host_USBTask() and SI_Host_ConfigurePipes() functions were misnamed, and are + * now named SImage_Host_USBTask() and SImage_Host_ConfigurePipes() respectively. + * - The HOST_SENDCONTROL_DeviceDisconnect enum value has been renamed to \ref HOST_SENDCONTROL_DeviceDisconnected to be in + * line with the rest of the library error codes. + * - The HID Parser item usages no longer contain separate minimum and maximum values, as this was a violation of the HID + * specification. Instead, the values are distributed evenly across each item as its usage value, to ensure that all items + * can be distinguished from one-another. + * + * Device Mode + * - The CALLBACK_HID_Device_CreateHIDReport() HID Device Class driver callback now has a new ReportType parameter to + * indicate the report type to generate. Existing applications may simply add and ignore this additional parameter. + * + * \section Sec_Migration091122 Migrating from 090924 to 091122 + * + * Host Mode + * - The HID_PARSE_UsageStackOverflow HID parser error constant is now named \ref HID_PARSE_UsageListOverflow + * - The \ref CALLBACK_HIDParser_FilterHIDReportItem() HID Parser callback now passes a complete HID_ReportItem_t to the + * user application, instead of just its attributes. + * - The USB_GetDeviceConfigDescriptor() function was incorrectly named and is now called \ref USB_Host_GetDeviceConfigDescriptor(). + * + * \section Sec_Migration090924 Migrating from 090810 to 090924 + * + * Non-USB Library Components + * - The ADC_Off() function has been renamed to \ref ADC_ShutDown() to be consistent with the rest of the library. + * - The \ref SPI_Init() routine's parameters have changed, so that the clock polarity and data sampling modes can be set. See + * the \ref SPI_Init() function documentation for more details + * - The \ref Dataflash_Init() routine no longer initializes the SPI bus - the SPI bus should be initialized manually via a + * call to SPI_Init() before using the Dataflash driver + * + * Host Mode + * - The USB_GetDeviceConfigDescriptor() function's parameters and behaviour has changed; the user is required to + * preallocate the largest allowable buffer, and pass the size of the buffer to the function. This allows for a single + * call to the function to retrieve, size check and validate the Configuration Descriptor rather than having the user + * application perform these intermediary steps. + * - The HID report parser now requires a mandatory callback in the user code, to filter only the items the application + * is interested in into the processed HID report item structure to save RAM. See \ref CALLBACK_HIDParser_FilterHIDReportItem(). + * - The HID report parser now always parses FEATURE and always ignores constant-data items - the HID_ENABLE_FEATURE_PROCESSING + * and HID_INCLUDE_CONSTANT_DATA_ITEMS compile time tokens now have no effect. + * - The USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now separate USB_Descriptor_* + * and USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so that both may be used in + * the one project. For existing projects using the standardized names, change all code to use the USB_StdDescriptor_* variants. + * + * Device Mode + * - The USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now separate USB_Descriptor_* + * and USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so that both may be used in + * the one project. For existing projects using the standardized names, change all code to use the USB_StdDescriptor_* variants. + * + * \section Sec_Migration090810 Migrating from 090605 to 090810 + * + * All + * - The "Simple Scheduler" has been deprecated, as it was little more than an abstracted loop and caused much confusion. + * User applications using the scheduler should switch to regular loops instead. The scheduler code will be removed in a future + * release. + * - The "Dynamic Memory Block Allocator" has been removed, as it was unused in (and unrelated to) the LUFA library and never + * used in user applications. The library is available from the author's website for those wishing to still use it in their + * applications. + * + * Non-USB Library Components + * - The ATTR_NOINLINE function attribute macro has been renamed to ATTR_NO_INLINE to be in line with the rest of the function attribute + * macro names. + * + * Library Demos + * - Most demos now have a corresponding Class Driver implementation, which uses the new internal library class drivers for the standard + * USB classes. This allows for more rapid device and host development, and so should be used in preference to the low level APIs where + * possible so that fixes to the class drivers propagate to all applications which use them automatically with each new LUFA release. + * + * Host Mode + * - The HIDParser.c module has moved from LUFA/Drivers/USB/Class/ to LUFA/Drivers/USB/Class/Host/. + * - The USB_GetDeviceConfigDescriptor() function now requires the desired configuration index within the device as its first + * parameter, to add support for multi-configuration devices. Existing code should use a configuration index of 1 to indicate the + * first configuration descriptor within the device. + * - The non-standard "Ready" host state has been removed. Existing \ref HOST_STATE_Configured code should be moved to the end of + * the existing \ref HOST_STATE_Addressed state, and the existing HOST_STATE_Ready state code should be moved to the \ref HOST_STATE_Configured + * state. + * - The USB_IsConnected global has been removed, as it is too vague for general use. Test \ref USB_HostState explicitly to ensure the host is + * in the desired state instead. + * - The USB event names have been changed and their firing conditions changed to properly separate out Host mode events from Device mode + * events. See the \ref Group_Events page for details on the new event names and firing conditions. + * + * Device Mode + * - The \ref CALLBACK_USB_GetDescriptor() function now takes an extra parameter to specify the descriptor's memory space so that + * descriptors in mixed memory spaces can be used. The previous functionality can be returned by defining the USE_FLASH_DESCRIPTORS + * token in the project makefile to fix all descriptors into FLASH space and remove the extra function parameter. + * - The USB_IsSuspended global has been removed - test \ref USB_DeviceState against \ref DEVICE_STATE_Suspended instead. + * - The USB_IsConnected global has been removed, as it is too vague for general use. Test \ref USB_DeviceState explicitly to ensure the device + * is in the desired state instead. + * - The VBUS events have been removed, as they are already exposed to the user via the USB_Connect and USB_Disconnect events. + * - The USB event names have been changed and their firing conditions changed to properly separate out Host mode events from Device mode + * events. See the \ref Group_Events page for details on the new event names and firing conditions. * + * + * \section Sec_Migration090605 Migrating from 090510 to 090605 + * + * Device Mode + * - Support for non-control data endpoint interrupts has been dropped due to many issues in the implementation. All existing + * projects using interrupts on non-control endpoints should switch to polling. For control interrupts, the library can + * manage the control endpoint via interrupts automatically by compiling with the INTERRUPT_CONTROL_ENDPOINT token defined. + * - The DESCRIPTOR_ADDRESS() macro has been removed. User applications should use normal casts to obtain a descriptor's memory + * address. + * - The library events system has been rewritten, so that all macros have been removed to allow for clearer user code. See + * \ref Group_Events for new API details. + * - The STREAM_CALLBACK() macro has been removed. User applications should replace all instances of the macro with regular + * function signatures of a function accepting no arguments and returning a uint8_t value. + * - The Event_DeviceError() event no longer exists, as its sole caller (unlinked USB_GetDescriptor() function) now produces a + * compilation error rather than a runtime error. The StdDescriptors.c file no longer exists as a result, and should be removed + * from project makefiles. + * - The USB_GetDescriptor() function has been renamed to CALLBACK_USB_GetDescriptor() to be in line with the new CALLBACK_ function + * prefixes for functions which *must* be implemented in the user application. + * + * Host Mode + * - Support for non-control data pipe interrupts has been dropped due to many issues in the implementation. All existing + * projects using interrupts on non-control pipes should switch to polling. + * - The library events system has been rewritten, so that all macros have been removed to allow for clearer user code. See + * \ref Group_Events for new API details. + * - The STREAM_CALLBACK() macro has been removed. User applications should replace all instances of the macro with regular + * function signatures of a function accepting no arguments and returning a uint8_t value. + * - The DESCRIPTOR_COMPARATOR() macro has been removed. User applications should replace all instances of the macro with + * regular function signatures of a function accepting a void pointer to the descriptor to test, and returning a uint8_t value. + * + * \section Sec_Migration090510 Migrating from 090401 to 090510 + * + * All + * - The ButtLoadTag.h header has been removed, as it was never used for its intended purpose. Projects should either remove all + * BUTTLOADTAG elements, or download and extract ButtLoadTag.h header from the ButtLoad project. + * - The Drivers/AT90USBXXX directory has been renamed to Drivers/Peripheral. + * - The Serial_Stream driver has been renamed to SerialStream to remain consistent with the rest of the library naming scheme. + * - The HWB driver has changed to the Buttons driver. See the board Buttons driver documentation for the new API. + * + * Dual Role Mode + * - The USB_PowerOnFail even has been renamed to USB_InitFailure. + * - The functions in OTG.h have been renamed to remain more consistent with the library API. See the functions in OTG.h for more + * details. + * + * Library Demos + * - Most demos, bootloaders and applications have had significant changes from previous versions. Applications built off of any + * library demos should update to the latest versions. + * + * Device Mode + * - The Endpoint_ClearCurrentBank() macro has been removed, and is now replaced with the Endpoint_ClearIN(), Endpoint_ClearOUT() + * macros. See Endpoint.h documentation for more details on the new endpoint management macros. + * - The Endpoint_ReadWriteAllowed() macro has been renamed to Endpoint_IsReadWriteAllowed() to be more consistent with the rest of + * the API naming scheme. + * - The Endpoint_IsSetupINReady() and Endpoint_IsSetupOutReceived() macros have been renamed to Endpoint_IsINReady() and + * Endpoint_IsOUTReceived() respectively. + * - The Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived(). + * - The Endpoint_ClearSetupReceived() macro has been renamed to Endpoint_ClearSETUP(). + * - All endpoint read/write/discard aliases which did not have an explicitly endianness specifier (such as Endpoint_Read_Word()) have + * been removed for clarity. Existing projects should use the "_LE" suffix on such calls to use the explicit Little Endian versions. + * - The USB_UnhandledControlPacket event no longer has any parameters. User code should no longer attempt to read in the remainder of + * the Control Request header as all Control Request header data is now preloaded by the library and made available in the + * USB_ControlRequest structure. + * - The FEATURELESS_CONTROL_ONLY_DEVICE token has been renamed to CONTROL_ONLY_DEVICE. + * - The STATIC_ENDPOINT_CONFIGURATION is no longer applicable as the library will apply this optimization when appropriate automatically. + * - The values of the Endpoint_Stream_RW_ErrorCodes_t and Endpoint_ControlStream_RW_ErrorCodes_t enums have had the "ERROR_" portion + * of their names removed. + * + * Host Mode + * - The USB_Host_SendControlRequest() function no longer automatically selects the Control pipe (pipe 0) to allow it to be used on + * other control type pipes. Care should be taken to ensure that the Control pipe is always selected before the function is called + * in existing projects where the Control pipe is to be operated on. + * - The USB Host management task now saves and restores the currently selected pipe before and after the task runs. Projects no longer + * need to manage this manually when calling the USB management task. + * - The Pipe_ClearCurrentBank() macro has been removed, and is now replaced with the Pipe_ClearIN(), Pipe_ClearOUT() macros. See + * Pipe.h documentation for more details on the new pipe management macros. + * - The Pipe_ReadWriteAllowed() macro has been renamed to Pipe_IsReadWriteAllowed() to be more consistent with the rest of the API + * naming scheme. + * - The Pipe_IsSetupINReceived() and Pipe_IsOutReady() macros have been renamed to Pipe_IsINReceived() and Pipe_IsOUTReady() + * respectively. + * - The new Pipe_ClearSETUP() macro should be used to send SETUP transactions, rather than the previous Pipe_ClearSetupOUT() macro. + * - The Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent(). + * - The Pipe_ClearSetupSent() macro is no longer applicable and should be removed. + * - All pipe read/write/discard aliases which did not have an explicitly endianness specifier (such as Pipe_Read_Word()) have + * been removed for clarity. Existing projects should use the "_LE" suffix on such calls to use the explicit Little Endian versions. + * - The Host_IsResetBusDone() macro has been renamed to Host_IsBusResetComplete(). + * - The Pipe_Ignore_Word() and Pipe_Ignore_DWord() functions have been renamed to Pipe_Discard_Word() and Pipe_Discard_DWord() to remain + * consistent with the rest of the pipe API. + * - It is no longer needed to manually include the headers from LUFA/Drivers/USB/Class, as they are now included along with the rest + * of the USB headers when LUFA/Drivers/USB/USB.h is included. + * - Functions in the ConfigDescriptor.h header file no longer have "Host_" as part of their names. + * - The ProcessHIDReport() has been renamed to USB_ProcessHIDReport(), GetReportItemInfo() has been renamed to USB_GetHIDReportItemInfo() + * and SetReportItemInfo() has been renamed to USB_GetHIDReportItemInfo(). + * - The values of the DSearch_Return_ErrorCodes_t and DSearch_Comp_Return_ErrorCodes_t enums have had their respective "Descriptor_Search" + * and "Descriptor_Search_Comp" prefixes changed to all caps. + * - The USB_HostRequest global has been renamed to USB_ControlRequest, and is used in Device mode also. The USB_Host_Request_Header_t + * structure type has been renamed to USB_Request_Header_t. + * - The values of the Pipe_Stream_RW_ErrorCodes_t enum have had the "ERROR_" portion of their names removed. + * + * \section Sec_Migration090401 Migrating from 090209 to 090401 + * + * All + * - LUFA projects must now give the raw input clock frequency (before any prescaling) as a compile time constant "F_CLOCK", + * defined in the project makefile and passed to the compiler via the -D switch. + * - The makefile EEPROM programming targets for FLIP and dfu-programmer no longer program in the FLASH data in addition to the + * EEPROM data into the device. If both are to be programmed, both the EEPROM and FLASH programming targets must be called. + * - As the avr-libc macro has been corrected in recent avr-libc distributions, the SetSystemClockPrescaler() macro has been removed. + * Include and call clock_prescale_set(clock_div_1); instead on recent avr-libc distributions. + * + * Library Demos + * - The USBtoSerial demo now discards all data when not connected to a host, rather than buffering it for later transmission. + * - Most demos, bootloaders and applications have had their control request handling code corrected, to properly send the status + * stage in all handled requests. If you are using code based off one of the library demos, bootloaders or applications, you should + * update to the latest revisions. + * + * Non-USB Library Components + * - The ATTR_ALWAYSINLINE function attribute macro has been renamed to ATTR_ALWAYS_INLINE. + * - Custom board Dataflash drivers now require the implementation of Dataflash_SelectChipFromPage() and Dataflash_SendAddressBytes(). + * + * Device Mode + * - The NO_CLEARSET_FEATURE_REQUEST compile time token has been renamed to FEATURELESS_CONTROL_ONLY_DEVICE, and its function expanded + * to also remove parts of the Get Status chapter 9 request to further reduce code usage. On all applications currently using the + * NO_CLEARSET_FEATURE_REQUEST compile time token, it can be replaced with the FEATURELESS_CONTROL_ONLY_DEVICE token with no further + * modifications required. + * + * \section Sec_Migration090209 Migrating from 081217 to 090209 + * + * Device Mode + * - The ENDPOINT_MAX_ENDPOINTS constant has been renamed to the more appropriate name of ENDPOINT_TOTAL_ENDPOINTS. + * - The USB_STREAM_TIMEOUT_MS stream timeout default period has been extended to 100ms. This can be overridden in the user + * makefile if desired to restore the previous 50ms timeout. + * + * Host Mode + * - The PIPE_MAX_ENDPOINTS constant has been renamed to the more appropriate name of PIPE_TOTAL_ENDPOINTS. + * - The USB_STREAM_TIMEOUT_MS stream timeout default period has been extended to 100ms. This can be overridden in the user + * makefile if desired to restore the previous 50ms timeout. + * - The USB_DeviceEnumerationFailed event now contains a second "SubErrorCode" parameter, giving the error code of the function + * which failed. + * - The HID_PARSE_Sucessful enum member constant has been corrected to HID_PARSE_Successful. + * + * Non-USB Library Components + * - The previous SPI_SendByte() functionality is now located in SPI_TransferByte(). SPI_SendByte() now discards the return byte + * for speed, to compliment the new SPI_ReceiveByte() function. If two-way SPI transfers are required, calls to SPI_SendByte() + * should be changed to SPI_TransferByte(). + * - The serial driver now sets the Tx line as an output explicitly, and enables the pull-up of the Rx line. + * - The Serial_Init() and SerialStream_Init() functions now take a second DoubleSpeed parameter, which indicates if the USART + * should be initialized in double speed mode - useful in some circumstances for attaining baud rates not usually possible at + * the given AVR clock speed. + * + * Library Demos + * - Most library demos have been enhanced and/or had errors corrected. All users of all demos should upgrade their codebase to + * the latest demo versions. + * + * \section Sec_Migration171208 Migrating from V1.5.3 to 081217 + * + * All + * - The MyUSB project name has been changed to LUFA (Lightweight Framework for USB AVRs). All references to MyUSB, including macro names, + * have been changed to LUFA. + * + * Library Demos + * - The ReconfigureUSART() routine in the USBtoSerial demo was not being called after new line encoding + * parameters were set by the host. Projects built on the USBtoSerial code should update to the latest version. + * - The HID Parser now supports multiple report (on a single endpoint) HID devices. The MouseHostWithParser and + * KeyboardHostWithPaser demos use the updated API functions to function correctly on such devices. Projects + * built on either "WithParser" demo should update to the latest code. + * - The RNDIS demo TCP stack has been modified so that connections can be properly closed. It is still not + * recommended that the MyUSB RNDIS demo TCP/IP stack be used for anything other than demonstration purposes, + * as it is neither a full nor a standards compliant implementation. + * + * Non-USB Library Components + * - The Serial_IsCharReceived() macro has been changed to the correct spelling of Serial_IsCharReceived() in Serial.h. + * + * Device Mode + * - The MANUAL_PLL_CONTROL compile time token has been removed, and replaced with a USB_OPT_MANUAL_PLL mask + * to be used in the Options parameter of the USB_Init() function. + * - Calling USB_Init() now forces a complete USB interface reset and enumeration, even if the USB interface is + * currently initialized. + * - Interrupts are now disabled when processing control requests, to avoid problems with interrupts causing the library + * or user request processing code to exceed the strict USB timing requirements on control transfers. + * - The USB Reset event now resets and disables all device endpoints. If user code depends on endpoints remaining configured + * after a Reset event, it should be altered to explicitly re-initialize all user endpoints. + * - The prototype for the GetDescriptor function has been changed, as the return value was redundant. The function now + * returns the size of the descriptor, rather than passing it back via a parameter, or returns NO_DESCRIPTOR if the specified + * descriptor does not exist. + * - The NO_DESCRIPTOR_STRING macro has been renamed NO_DESCRIPTOR, and is now also used as a possible return value for the + * GetDescriptor function. + * + * Host Mode + * - The MANUAL_PLL_CONTROL compile time token has been removed, and replaced with a USB_OPT_MANUAL_PLL mask + * to be used in the Options parameter of the USB_Init() function. + * - The HID report parser now supports multiple Report IDs. The HID report parser GetReportItemInfo() and + * SetReportItemInfo() routines now return a boolean, set if the requested report item was located in the + * current report. If sending a report to a multi-report device, the first byte of the report is automatically + * set to the report ID of the given report item. + * - Calling USB_Init() now forces a complete USB interface reset and enumeration, even if the USB interface is + * currently initialized. + * + * \section Sec_Migration152 Migrating from V1.5.2 to V1.5.3 + * + * Library Demos + * - Previously, all demos contained a serial number string descriptor, filled with all zeros. A serial number + * string is required in Mass Storage devices, or devices which are to retain settings when moved between + * ports on a machine. As people were not changing the serial number value, this was causing conflicts and so + * the serial number descriptor has been removed from all but the Mass Storage demo, which requires it. + * - The AudioOut and AudioIn demos did not previously silence their endpoints when the host has deactivated + * them. Projects built upon either demo should upgrade to the latest code. + * - The FEATURE_ENDPOINT macro has been renamed FEATURE_ENDPOINT_HALT, and is now correctly documented. + * - The MassStoreHost demo contained errors which caused it to lock up randomly on certain devices. Projects built + * on the MassStoreDemo code should update to the latest version. + * - The Interrupt type endpoint in the CDC based demos previously had a polling interval of 0x02, which caused + * problems on some Linux systems. This has been changed to 0xFF, projects built on the CDC demos should upgrade + * to the latest code. + * - The HID keyboard and mouse demos were not previously boot mode compatible. To enable boot mode support, projects + * built on the keyboard or mouse demos (or derivatives) should upgrade to the latest code. + * - The Mass Storage demo was not previously standards compliant. Projects built on the Mass Storage demo should + * upgrade to the latest code. + * - The USART was not being reconfigured after the host sent new encoding settings in the USBtoSerial demo. This was + * previously discovered and fixed, but the change was lost. Projects built on the USBtoSerial demo should update + * to the latest code. + * + * Device Mode + * - The endpoint non-control stream functions now have a default timeout of 50ms between packets in the stream. + * If this timeout is exceeded, the function returns the new ENDPOINT_RWSTREAM_ERROR_Timeout error value. The + * timeout value can be overridden by defining the USB_STREAM_TIMEOUT_MS in the project makefile to the desired + * timeout duration in ms. + * - Rather than returning fixed values, the flags indicating if the device has Remote Wakeup currently enabled + * and/or is self-powered are now accessed and set through the new USB_RemoteWakeupEnabled and + * USB_CurrentlySelfPowered macros. See the DevChapter9.h documentation for more details. + * - All endpoint stream functions now require an extra Callback function parameter. Existing code may be updated + * to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by passing + * the token NO_STREAM_CALLBACKS to the compiler using the -D switch. + * + * Host Mode + * - The pipe non-control stream functions now have a default timeout of 50ms between packets in the stream. + * If this timeout is exceeded, the function returns the new PIPE_RWSTREAM_ERROR_Timeout error value. The + * timeout value can be overridden by defining the USB_STREAM_TIMEOUT_MS in the project makefile to the desired + * timeout duration in ms. + * - CollectionPath_t has been renamed to HID_CollectionPath_t to be more in line with the other HID parser structures. + * - All pipe stream functions now require an extra Callback function parameter. Existing code may be updated + * to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by passing + * the token NO_STREAM_CALLBACKS to the compiler using the -D switch. + * + * \section Sec_Migration151 Migrating from V1.5.1 to V1.5.2 + * + * Library Demos + * - The RNDIS demo application has been updated so that it is functional on Linux under earlier implementations + * of the RNDIS specification, which had non-standard behaviour. Projects built upon the demo should upgrade + * to the latest code. + * - The DFU class bootloader has had several bugs corrected in this release. It is recommended that where + * possible any existing devices upgrade to the latest bootloader code. + * + * \section Sec_Migration150 Migrating from V1.5.0 to V1.5.1 + * + * Library Demos + * - The USBtoSerial demo was broken in the 1.5.0 release, due to incorrect register polling in place of the + * global "Transmitting" flag. The change has been reverted in this release. Projects built upon the demo + * should upgrade to the latest code. + * - The HID class demos did not implement the mandatory GetReport HID class request. Projects built upon the HID + * demos should upgrade to the latest code. + * - The HID class demos incorrectly reported themselves as boot-protocol enabled HID devices in their descriptors. + * Projects built upon the HID demos should upgrade to the latest code. + * - The MIDI device demo had incorrect AudioStreaming interface descriptors. Projects built upon the MIDI demo + * should upgrade to the latest code. + * - The AudioOut demo did not correctly tristate the speaker pins when USB was disconnected, wasting power. + * Projects built upon the AudioOut demo should upgrade to the latest code. + * + * \section Sec_Migration141 Migrating from V1.4.1 to V1.5.0 + * + * Library Demos + * - Previous versions of the library demos had incorrectly encoded BCD version numbers in the descriptors. To + * avoid such mistakes in the future, the VERSION_BCD macro has been added to StdDescriptors.h. Existing + * projects should at least manually correct the BCD version numbers, or preferably update the descriptors to + * encode the version number in BCD format using the new macro. + * - The mandatory GetReport class-specific request was accidentally omitted from previous versions of the demos + * based on the Human Interface Device (HID) class. This has been corrected, and any user projects based on the + * HID demos should also be updated accordingly. + * - The CDC demos now correctly send an empty packet directly after a full packet, to end the transmission. + * Failure to do this on projects which always or frequently send full packets will cause buffering issues on + * the host OS. All CDC user projects are advised to update their transmission routines in the same manner as + * the library CDC demos. + * - The previous interrupt-driven Endpoint/Pipe demos did not properly save and restore the currently selected + * Endpoint/Pipe when the ISR fired. This has been corrected - user projects based on the interrupt driven + * demos should also update to properly save and restore the selected Endpoint/Pipe. + * + * Non-USB Library Components + * - The Atomic.h and ISRMacro.h header files in MyUSB/Common have been removed, as the library is now only + * compatible with avr-libc library versions newer than the time before the functionality of the deleted + * headers was available. + * + * Device Mode + * - The GetDescriptor function (see StdDescriptors.h) now has a new prototype, with altered parameter names and + * functions. Existing projects will need to update the GetDescriptor implementation to reflect the new API. + * The previously split Type and Index parameters are now passed as the original wValue parameter to the + * function, to make way for the USB specification wIndex parameter which is not the same as the + * previous Index parameter. + * - The USB_UnhandledControlPacket event (see Events.h) now has new parameter names, to be in line with the + * official USB specification. Existing code will need to be altered to use the new parameter names. + * - The USB_CreateEndpoints event (see Events.h) has been renamed to USB_ConfigurationChanged, which is more + * appropriate. It fires in an identical manner to the previously named event, thus the only change to be made + * is the event name itself in the user project. + * - The USB_Descriptor_Language_t structure no longer exists in StdDescriptors.h, as this was a + * pseudo-descriptor modeled on the string descriptor. It is replaced by the true USB_Descriptor_String_t type + * descriptor as indicated in the USB specification, thus all device code must be updated accordingly. + * - The names of several Endpoint macros have been changed to be more consistent with the rest of the library, + * with no implementation changes. This means that existing code can be altered to use the new macro names + * with no other considerations required. See Endpoint.h for the new macro names. + * - The previous version of the MassStorage demo had an incorrect value in the SCSI_Request_Sense_Response_t + * structure named SenseData in SCSI.c which caused some problems with some hosts. User projects based on this + * demo should correct the structure value to maintain compatibility across multiple OS platforms. + * - By default, the descriptor structures use the official USB specification names for the elements. Previous + * versions of the library used non-standard (but more verbose) names, which are still usable in the current + * and future releases when the correct compile time option is enabled. See the StdDescriptors.h file + * documentation for more details. + * + * Host Mode + * - The USB_Host_Request_Header_t structure in HostChapter9.h (used for issuing control requests) has had its + * members renamed to the official USB specification names for requests. Existing code will need to be updated + * to use the new names. + * - The names of several Pipe macros have been changed to be more consistent with the rest of the library, + * with no implementation changes. This means that existing code can be altered to use the new macro names + * with no other considerations required. See Pipe.h for the new macro names. + * - By default, the descriptor structures use the official USB specification names for the elements. Previous + * versions of the library used non-standard (but more verbose) names, which are still usable in the current + * and future releases when the correct compile time option is enabled. See the StdDescriptors.h file + * documentation for more details. + * - The names of the macros in Host.h for controlling the SOF generation have been renamed, see the Host.h + * module documentation for the new macro names. + * + * Dual Role Mode + * - The OTG.h header file has been corrected so that the macros now perform their stated functions. Any existing + * projects using custom headers to fix the broken OTG header should now be altered to once again use the OTG + * header inside the library. + * - The USB_DeviceEnumerationComplete event (see Events.h) now also fires in Device mode, when the host has + * finished enumerating the device. Projects relying on the event only firing in Host mode should be updated + * so that the event action only occurs when the USB_Mode global is set to USB_MODE_HOST. + */ + diff --git a/LUFA/ManPages/ProgrammingApps.txt b/LUFA/ManPages/ProgrammingApps.txt new file mode 100644 index 0000000..ea5a447 --- /dev/null +++ b/LUFA/ManPages/ProgrammingApps.txt @@ -0,0 +1,27 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_ProgrammingApps Programming an Application into a USB AVR + * + * Once you have built an application, you will need a way to program in the resulting ".HEX" file (and, if your + * application uses EEPROM variables with initial values, also a ".EEP" file) into your USB AVR. Normally, the + * reprogramming of an AVR device must be performed using a special piece of programming hardware, through one of the + * supported AVR programming protocols - ISP, HVSP, HVPP, JTAG or dW. This can be done through a custom programmer, + * a third party programmer, or an official Atmel AVR tool - for more information, see the Atmel.com website. + * + * Alternatively, you can use the bootloader. From the Atmel factory, each USB AVR comes preloaded with the Atmel + * DFU (Device Firmware Update) class bootloader, a small piece of AVR firmware which allows the remainder of the + * AVR to be programmed through a non-standard interface such as the serial USART port, SPI, or (in this case) USB. + * Bootloaders have the advantage of not requiring any special hardware for programming, and cannot usually be erased + * or broken without an external programming device. They have disadvantages however; they cannot change the fuses of + * the AVR (special configuration settings that control the operation of the chip itself) and a small portion of the + * AVR's FLASH program memory must be reserved to contain the bootloader firmware, and thus cannot be used by the + * loaded application. Atmel's DFU bootloader is either 4KB (for the smaller USB AVRs) or 8KB (for the larger USB AVRs). + * + * If you wish to use the DFU bootloader to program in your application, refer to your DFU programmer's documentation. + * Atmel provides a free utility called FLIP which is USB AVR compatible, and an open source (Linux compatible) + * alternative exists called "dfu-programmer". + */ diff --git a/LUFA/ManPages/SoftwareBootloaderJump.txt b/LUFA/ManPages/SoftwareBootloaderJump.txt new file mode 100644 index 0000000..a553ebd --- /dev/null +++ b/LUFA/ManPages/SoftwareBootloaderJump.txt @@ -0,0 +1,69 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \page Page_SoftwareBootloaderStart Entering the Bootloader via Software + * + * A common requirement of many applications is the ability to jump to the programmed bootloader of a chip + * on demand, via the code's firmware (i.e. not as a result of any physical user interaction with the + * hardware). This might be required because the device does not have any physical user input, or simply + * just to streamline the device upgrade process on the host PC. + * + * The following C code snippet may be used to enter the bootloader upon request by the user application. + * By using the watchdog to physically reset the controller, it is ensured that all system hardware is + * completely reset to their defaults before the bootloader is run. This is important; since bootloaders + * are written to occupy a very limited space, they usually make assumptions about the register states based + * on the default values after a hard-reset of the chip. + * + * \code + * #include + * #include + * #include + * + * #include + * #include + * + * uint32_t Boot_Key ATTR_NO_INIT; + * + * #define MAGIC_BOOT_KEY 0xDC42ACCA + * #define BOOTLOADER_START_ADDRESS (FLASH_SIZE_BYTES - BOOTLOADER_SEC_SIZE_BYTES) + * + * void Bootloader_Jump_Check(void) ATTR_INIT_SECTION(3); + * void Bootloader_Jump_Check(void) + * { + * // If the reset source was the bootloader and the key is correct, clear it and jump to the bootloader + * if ((MCUSR & (1 << WDRF)) && (Boot_Key == MAGIC_BOOT_KEY)) + * { + * Boot_Key = 0; + * ((void (*)(void))BOOTLOADER_START_ADDRESS)(); + * } + * } + * + * void Jump_To_Bootloader(void) + * { + * // If USB is used, detach from the bus + * USB_ShutDown(); + * + * // Disable all interrupts + * cli(); + * + * // Wait two seconds for the USB detachment to register on the host + * for (uint8_t i = 0; i < 128; i++) + * _delay_ms(16); + * + * // Set the bootloader key to the magic value and force a reset + * Boot_Key = MAGIC_BOOT_KEY; + * wdt_enable(WDTO_250MS); + * for (;;); + * } + * \endcode + * + * Note that the bootloader magic key can be any arbitrary value. The FLASH_SIZE_BYTES and + * BOOTLOADER_SEC_SIZE_BYTES tokens should be replaced with the total flash size of the AVR + * in bytes, and the allocated size of the bootloader section for the target AVR. + * + */ + diff --git a/LUFA/ManPages/VIDAndPIDValues.txt b/LUFA/ManPages/VIDAndPIDValues.txt new file mode 100644 index 0000000..1dd2515 --- /dev/null +++ b/LUFA/ManPages/VIDAndPIDValues.txt @@ -0,0 +1,424 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_VIDPID VID and PID values + * + * \section Sec_VIDPID_Allocations + * The LUFA library uses VID/PID combinations generously donated by Atmel. The following VID/PID combinations + * are used within the LUFA demos, and thus may be re-used by derivations of each demo. Free PID values may be + * used by future LUFA demo projects. + * + * These VID/PID values should not be used in commercial designs under any circumstances. Private projects + * may use the following values freely, but must accept any collisions due to other LUFA derived private projects + * sharing identical values. It is suggested that private projects using interfaces compatible with existing + * demos share the same VID/PID value. + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + *
+ * VID + * + * PID + * + * Usage + *
+ * 0x03EB + * + * 0x2040 + * + * Test VID/PID (See below) + *
+ * 0x03EB + * + * 0x2041 + * + * Mouse Demo Application + *
+ * 0x03EB + * + * 0x2042 + * + * Keyboard Demo Application + *
+ * 0x03EB + * + * 0x2043 + * + * Joystick Demo Application + *
+ * 0x03EB + * + * 0x2044 + * + * CDC Demo Application + *
+ * 0x03EB + * + * 0x2045 + * + * Mass Storage Demo Application + *
+ * 0x03EB + * + * 0x2046 + * + * Audio Output Demo Application + *
+ * 0x03EB + * + * 0x2047 + * + * Audio Input Demo Application + *
+ * 0x03EB + * + * 0x2048 + * + * MIDI Demo Application + *
+ * 0x03EB + * + * 0x2049 + * + * MagStripe Project + *
+ * 0x03EB + * + * 0x204A + * + * CDC Bootloader + *
+ * 0x03EB + * + * 0x204B + * + * USB to Serial Demo Application + *
+ * 0x03EB + * + * 0x204C + * + * RNDIS Demo Application + *
+ * 0x03EB + * + * 0x204D + * + * Combined Keyboard and Mouse Demo Application + *
+ * 0x03EB + * + * 0x204E + * + * Dual CDC Demo Application + *
+ * 0x03EB + * + * 0x204F + * + * Generic HID Demo Application + *
+ * 0x03EB + * + * 0x2060 + * + * Benito Programmer Project + *
+ * 0x03EB + * + * 0x2061 + * + * Combined Mass Storage and Keyboard Demo + *
+ * 0x03EB + * + * 0x2062 + * + * Combined CDC and Mouse Demo + *
+ * 0x03EB + * + * 0x2063 + * + * Mass Storage/HID Interface Datalogger Project + *
+ * 0x03EB + * + * 0x2064 + * + * Interfaceless Control-Only LUFA Devices + *
+ * 0x03EB + * + * 0x2065 + * + * Test and Measurement Demo + *
+ * 0x03EB + * + * 0x2066 + * + * Currently Unallocated + *
+ * 0x03EB + * + * 0x2067 + * + * Currently Unallocated + *
+ * 0x03EB + * + * 0x2068 + * + * Currently Unallocated + *
+ * 0x03EB + * + * 0x2069 + * + * Currently Unallocated + *
+ * 0x03EB + * + * 0x206A + * + * Currently Unallocated + *
+ * 0x03EB + * + * 0x206B + * + * Currently Unallocated + *
+ * 0x03EB + * + * 0x206C + * + * Currently Unallocated + *
+ * 0x03EB + * + * 0x206D + * + * Currently Unallocated + *
+ * 0x03EB + * + * 0x206E + * + * Currently Unallocated + *
+ * 0x03EB + * + * 0x206F + * + * Currently Unallocated + *
+ * + * \section Sec_Test_VIDPID The Test VID/PID Combination: + * For use in testing of LUFA powered devices during development only, by non-commercial entities. + * All devices must accept collisions on this VID/PID range (from other in-development LUFA devices) + * to be resolved by using a unique release number in the Device Descriptor. No devices using this + * VID/PID combination may be released to the general public. + */ + diff --git a/LUFA/ManPages/WhyUseLUFA.txt b/LUFA/ManPages/WhyUseLUFA.txt new file mode 100644 index 0000000..43df7e5 --- /dev/null +++ b/LUFA/ManPages/WhyUseLUFA.txt @@ -0,0 +1,46 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** + * \page Page_WhyUseLUFA Why Use LUFA? + * + * The LUFA Library has many advantages over implementing the code required to drive the USB AVRs directly. + * It is much more preferable to incorporate LUFA into your existing projects - or even make a new project + * using LUFA - than it is to start from scratch and use the USB AVR registers directly. Some of these reasons + * are: + * + * - Portability: + * The LUFA stack is designed to run (at some capacity) on the entire Atmel range of USB AVRs, regardless of the + * exact USB controller revision used. If you decide to implement your own USB stack, you will either need to + * code around the differences between each USB AVR controller's implementation between different chip models, or + * require your code to run on only one specific USB AVR model series. + * + * - Speed of Development: + * LUFA ships with a wide range of pre-made demos, bootloaders and projects for you to try, learn and extend. Each + * of these demos are tested (where possible) across as many USB AVRs and Operating Systems as possible, to ensure + * that they work under as many conditions as possible. In addition, there are inbuilt class drivers for several of + * the USB classes which you can make use of in your projects with minimal effort. + * + * - Maintainability: + * As LUFA takes care of much of the USB implementation, you can be left to focusing on your actual project's + * functionality, rather than being held back developing and debugging the USB stack code. Since LUFA uses clear APIs + * for USB development, your code will be more readable than if it had the low level USB stack code integrated into + * it directly. Updating the LUFA library is a simple folder-replacement and gives new features and bug fixes in + * seconds each time a new release is made. + * + * - Size: + * Not just requiring less code to make complex USB devices, LUFA (under most cases with the correct compile options) + * requires less FLASH space than Atmel's stack, meaning more space for the user application*. + * + * - Support: + * Since many people are now using LUFA in their own projects, you can take advantage of other's knowledge when you run + * into difficulties or need some advice. In addition, you can also email the library author to receive personalized + * support when you need it (subject to author's schedule). + * + * * Atmel Stack Mouse Device Demo 4292 bytes, LUFA Mouse Low Level Device Demo 3332 bytes, under identical build + * environments + */ + diff --git a/LUFA/ManPages/WritingBoardDrivers.txt b/LUFA/ManPages/WritingBoardDrivers.txt new file mode 100644 index 0000000..1b33269 --- /dev/null +++ b/LUFA/ManPages/WritingBoardDrivers.txt @@ -0,0 +1,27 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \page Page_WritingBoardDrivers Writing LUFA Board Drivers + * + * LUFA ships with several basic pre-made board drivers, to control hardware present on the supported board + * hardware - such as Dataflash ICs, LEDs, Joysticks, or other hardware peripherals. When compiling an application + * which makes use of one or more board drivers located in LUFA/Drivers/Board, you must also indicate what board + * hardware you are using in your project makefile. This is done by defining the BOARD macro using the -D switch + * passed to the compiler, with a constant of BOARD_{Name}. For example -DBOARD=BOARD_USBKEY instructs the + * compiler to use the USBKEY board hardware drivers. + * + * If your application does not use *any* board level drivers, you can omit the definition of the BOARD macro. + * However, some users may wish to write their own custom board hardware drivers which are to remain compatible + * with the LUFA hardware API. To do this, the BOARD macro should be defined to the value BOARD_USER. This indicates + * that the board level drivers should be located in a folder named "Board" located inside the application's folder. + * + * When used, the driver stub files located in the LUFA/CodeTemplates/DriverStubs folder should be copied to the user + * Board/ directory, and fleshed out to include the values and code needed to control the custom board hardware. Once + * done, the existing LUFA board level APIs (accessed in the regular LUFA/Drivers/Board/ folder) will redirect to the + * user board drivers, maintaining code compatibility and allowing for a different board to be selected through the + * project makefile with no code changes. + */ + -- cgit v1.2.3