diff options
| -rw-r--r-- | meta/recipes-core/base-passwd/base-passwd-3.5.22/login.defs | 386 | ||||
| -rw-r--r-- | meta/recipes-core/base-passwd/base-passwd_3.5.22.bb | 9 |
2 files changed, 1 insertions, 394 deletions
diff --git a/meta/recipes-core/base-passwd/base-passwd-3.5.22/login.defs b/meta/recipes-core/base-passwd/base-passwd-3.5.22/login.defs deleted file mode 100644 index 1d392acf2..000000000 --- a/meta/recipes-core/base-passwd/base-passwd-3.5.22/login.defs +++ /dev/null @@ -1,386 +0,0 @@ -# -# /etc/login.defs - Configuration control definitions for the shadow package. -# -# $Id: login.defs 3038 2009-07-23 20:41:35Z nekral-guest $ -# - -# -# Delay in seconds before being allowed another attempt after a login failure -# Note: When PAM is used, some modules may enfore a minimal delay (e.g. -# pam_unix enforces a 2s delay) -# -FAIL_DELAY 3 - -# -# Enable logging and display of /var/log/faillog login failure info. -# -FAILLOG_ENAB yes - -# -# Enable display of unknown usernames when login failures are recorded. -# -LOG_UNKFAIL_ENAB no - -# -# Enable logging of successful logins -# -LOG_OK_LOGINS no - -# -# Enable logging and display of /var/log/lastlog login time info. -# -LASTLOG_ENAB yes - -# -# Enable checking and display of mailbox status upon login. -# -# Disable if the shell startup files already check for mail -# ("mailx -e" or equivalent). -# -#MAIL_CHECK_ENAB yes - -# -# Enable additional checks upon password changes. -# -OBSCURE_CHECKS_ENAB yes - -# -# Enable checking of time restrictions specified in /etc/porttime. -# -PORTTIME_CHECKS_ENAB yes - -# -# Enable setting of ulimit, umask, and niceness from passwd gecos field. -# -QUOTAS_ENAB yes - -# -# Enable "syslog" logging of su activity - in addition to sulog file logging. -# SYSLOG_SG_ENAB does the same for newgrp and sg. -# -SYSLOG_SU_ENAB yes -SYSLOG_SG_ENAB yes - -# -# If defined, either full pathname of a file containing device names or -# a ":" delimited list of device names. Root logins will be allowed only -# upon these devices. -# -CONSOLE /etc/securetty -#CONSOLE console:tty01:tty02:tty03:tty04 - -# -# If defined, all su activity is logged to this file. -# -#SULOG_FILE /var/log/sulog - -# -# If defined, ":" delimited list of "message of the day" files to -# be displayed upon login. -# -MOTD_FILE /etc/motd -#MOTD_FILE /etc/motd:/usr/lib/news/news-motd - -# -# If defined, this file will be output before each login prompt. -# -#ISSUE_FILE /etc/issue - -# -# If defined, file which maps tty line to TERM environment parameter. -# Each line of the file is in a format something like "vt100 tty01". -# -#TTYTYPE_FILE /etc/ttytype - -# -# If defined, login failures will be logged here in a utmp format. -# last, when invoked as lastb, will read /var/log/btmp, so... -# -FTMP_FILE /var/log/btmp - -# -# If defined, name of file whose presence which will inhibit non-root -# logins. The contents of this file should be a message indicating -# why logins are inhibited. -# -NOLOGINS_FILE /etc/nologin - -# -# If defined, the command name to display when running "su -". For -# example, if this is defined as "su" then a "ps" will display the -# command is "-su". If not defined, then "ps" would display the -# name of the shell actually being run, e.g. something like "-sh". -# -SU_NAME su - -# -# *REQUIRED* -# Directory where mailboxes reside, _or_ name of file, relative to the -# home directory. If you _do_ define both, #MAIL_DIR takes precedence. -# -#MAIL_DIR /var/spool/mail -MAIL_FILE .mail - -# -# If defined, file which inhibits all the usual chatter during the login -# sequence. If a full pathname, then hushed mode will be enabled if the -# user's name or shell are found in the file. If not a full pathname, then -# hushed mode will be enabled if the file exists in the user's home directory. -# -HUSHLOGIN_FILE .hushlogin -#HUSHLOGIN_FILE /etc/hushlogins - -# -# If defined, either a TZ environment parameter spec or the -# fully-rooted pathname of a file containing such a spec. -# -#ENV_TZ TZ=CST6CDT -#ENV_TZ /etc/tzname - -# -# If defined, an HZ environment parameter spec. -# -# for Linux/x86 -ENV_HZ HZ=100 -# For Linux/Alpha... -#ENV_HZ HZ=1024 - -# -# *REQUIRED* The default PATH settings, for superuser and normal users. -# -# (they are minimal, add the rest in the shell startup files) -ENV_SUPATH PATH=/sbin:/bin:/usr/sbin:/usr/bin -ENV_PATH PATH=/bin:/usr/bin - -# -# Terminal permissions -# -# TTYGROUP Login tty will be assigned this group ownership. -# TTYPERM Login tty will be set to this permission. -# -# If you have a "write" program which is "setgid" to a special group -# which owns the terminals, define TTYGROUP to the group number and -# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign -# TTYPERM to either 622 or 600. -# -TTYGROUP tty -TTYPERM 0600 - -# -# Login configuration initializations: -# -# ERASECHAR Terminal ERASE character ('\010' = backspace). -# KILLCHAR Terminal KILL character ('\025' = CTRL/U). -# ULIMIT Default "ulimit" value. -# -# The ERASECHAR and KILLCHAR are used only on System V machines. -# The ULIMIT is used only if the system supports it. -# (now it works with setrlimit too; ulimit is in 512-byte units) -# -# Prefix these values with "0" to get octal, "0x" to get hexadecimal. -# -ERASECHAR 0177 -KILLCHAR 025 -#ULIMIT 2097152 - -# Default initial "umask" value for non-PAM enabled systems. -# UMASK is also used by useradd and newusers to set the mode of new home -# directories. -# 022 is the default value, but 027, or even 077, could be considered -# better for privacy. There is no One True Answer here: each sysadmin -# must make up her mind. -UMASK 022 - -# -# Password aging controls: -# -# PASS_MAX_DAYS Maximum number of days a password may be used. -# PASS_MIN_DAYS Minimum number of days allowed between password changes. -# PASS_MIN_LEN Minimum acceptable password length. -# PASS_WARN_AGE Number of days warning given before a password expires. -# -PASS_MAX_DAYS 99999 -PASS_MIN_DAYS 0 -PASS_MIN_LEN 5 -PASS_WARN_AGE 7 - -# -# If "yes", the user must be listed as a member of the first gid 0 group -# in /etc/group (called "root" on most Linux systems) to be able to "su" -# to uid 0 accounts. If the group doesn't exist or is empty, no one -# will be able to "su" to uid 0. -# -SU_WHEEL_ONLY no - -# -# If compiled with cracklib support, where are the dictionaries -# -CRACKLIB_DICTPATH /var/cache/cracklib/cracklib_dict - -# -# Min/max values for automatic uid selection in useradd -# -UID_MIN 1000 -UID_MAX 60000 -# System accounts -SYS_UID_MIN 101 -SYS_UID_MAX 999 - -# -# Min/max values for automatic gid selection in groupadd -# -GID_MIN 1000 -GID_MAX 60000 -# System accounts -SYS_GID_MIN 101 -SYS_GID_MAX 999 - -# -# Max number of login retries if password is bad -# -LOGIN_RETRIES 5 - -# -# Max time in seconds for login -# -LOGIN_TIMEOUT 60 - -# -# Maximum number of attempts to change password if rejected (too easy) -# -PASS_CHANGE_TRIES 5 - -# -# Warn about weak passwords (but still allow them) if you are root. -# -PASS_ALWAYS_WARN yes - -# -# Number of significant characters in the password for crypt(). -# Default is 8, don't change unless your crypt() is better. -# Ignored if MD5_CRYPT_ENAB set to "yes". -# -#PASS_MAX_LEN 8 - -# -# Require password before chfn/chsh can make any changes. -# -CHFN_AUTH yes - -# -# Which fields may be changed by regular users using chfn - use -# any combination of letters "frwh" (full name, room number, work -# phone, home phone). If not defined, no changes are allowed. -# For backward compatibility, "yes" = "rwh" and "no" = "frwh". -# -CHFN_RESTRICT rwh - -# -# Password prompt (%s will be replaced by user name). -# -# XXX - it doesn't work correctly yet, for now leave it commented out -# to use the default which is just "Password: ". -#LOGIN_STRING "%s's Password: " - -# -# Only works if compiled with MD5_CRYPT defined: -# If set to "yes", new passwords will be encrypted using the MD5-based -# algorithm compatible with the one used by recent releases of FreeBSD. -# It supports passwords of unlimited length and longer salt strings. -# Set to "no" if you need to copy encrypted passwords to other systems -# which don't understand the new algorithm. Default is "no". -# -# Note: If you use PAM, it is recommended to use a value consistent with -# the PAM modules configuration. -# -# This variable is deprecated. You should use ENCRYPT_METHOD. -# -#MD5_CRYPT_ENAB no - -# -# Only works if compiled with ENCRYPTMETHOD_SELECT defined: -# If set to MD5 , MD5-based algorithm will be used for encrypting password -# If set to SHA256, SHA256-based algorithm will be used for encrypting password -# If set to SHA512, SHA512-based algorithm will be used for encrypting password -# If set to DES, DES-based algorithm will be used for encrypting password (default) -# Overrides the MD5_CRYPT_ENAB option -# -# Note: If you use PAM, it is recommended to use a value consistent with -# the PAM modules configuration. -# -#ENCRYPT_METHOD DES - -# -# Only works if ENCRYPT_METHOD is set to SHA256 or SHA512. -# -# Define the number of SHA rounds. -# With a lot of rounds, it is more difficult to brute forcing the password. -# But note also that it more CPU resources will be needed to authenticate -# users. -# -# If not specified, the libc will choose the default number of rounds (5000). -# The values must be inside the 1000-999999999 range. -# If only one of the MIN or MAX values is set, then this value will be used. -# If MIN > MAX, the highest value will be used. -# -# SHA_CRYPT_MIN_ROUNDS 5000 -# SHA_CRYPT_MAX_ROUNDS 5000 - -# -# List of groups to add to the user's supplementary group set -# when logging in on the console (as determined by the CONSOLE -# setting). Default is none. -# -# Use with caution - it is possible for users to gain permanent -# access to these groups, even when not logged in on the console. -# How to do it is left as an exercise for the reader... -# -#CONSOLE_GROUPS floppy:audio:cdrom - -# -# Should login be allowed if we can't cd to the home directory? -# Default in no. -# -DEFAULT_HOME yes - -# -# If this file exists and is readable, login environment will be -# read from it. Every line should be in the form name=value. -# -ENVIRON_FILE /etc/environment - -# -# If defined, this command is run when removing a user. -# It should remove any at/cron/print jobs etc. owned by -# the user to be removed (passed as the first argument). -# -#USERDEL_CMD /usr/sbin/userdel_local - -# -# Enable setting of the umask group bits to be the same as owner bits -# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is -# the same as gid, and username is the same as the primary group name. -# -# This also enables userdel to remove user groups if no members exist. -# -USERGROUPS_ENAB yes - -# -# If set to a non-nul number, the shadow utilities will make sure that -# groups never have more than this number of users on one line. -# This permit to support split groups (groups split into multiple lines, -# with the same group ID, to avoid limitation of the line length in the -# group file). -# -# 0 is the default value and disables this feature. -# -#MAX_MEMBERS_PER_GROUP 0 - -# -# If useradd should create home directories for users by default (non -# system users only) -# This option is overridden with the -M or -m flags on the useradd command -# line. -# -CREATE_HOME yes - diff --git a/meta/recipes-core/base-passwd/base-passwd_3.5.22.bb b/meta/recipes-core/base-passwd/base-passwd_3.5.22.bb index 7b1fdf17c..a155b4102 100644 --- a/meta/recipes-core/base-passwd/base-passwd_3.5.22.bb +++ b/meta/recipes-core/base-passwd/base-passwd_3.5.22.bb @@ -7,8 +7,7 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=eb723b61539feef013de476e68b5c50a" SRC_URI = "${DEBIAN_MIRROR}/main/b/base-passwd/base-passwd_${PV}.tar.gz \ file://nobash.patch \ - file://root-home.patch \ - file://login.defs" + file://root-home.patch" SRC_URI[md5sum] = "47f22ab6b572d0133409ff6ad1fab402" SRC_URI[sha256sum] = "d34acb35a9f9f221e7e4f642b9ef4b22083dd77bb2fc7216756f445316d842fc" @@ -30,7 +29,6 @@ do_install () { install -d -m 755 ${D}${datadir}/base-passwd install -o root -g root -p -m 644 passwd.master ${D}${datadir}/base-passwd/ install -o root -g root -p -m 644 group.master ${D}${datadir}/base-passwd/ - install -o root -g root -p -m 644 ${S}/../login.defs ${D}${datadir}/base-passwd/login.defs install -d -m 755 ${D}${docdir}/${PN} install -p -m 644 debian/changelog ${D}${docdir}/${PN}/ @@ -49,10 +47,6 @@ pkg_postinst_${PN} () { if [ ! -e $D${sysconfdir}/group ] ; then cp $D${datadir}/base-passwd/group.master $D${sysconfdir}/group fi - - if [ ! -e $D{sysconfdir}/login.defs ] ; then - cp $D${datadir}/base-passwd/login.defs $D${sysconfdir}/login.defs - fi exit 0 } @@ -67,6 +61,5 @@ base_passwd_sstate_postinst() { install -d -m 755 ${STAGING_DIR_TARGET}${sysconfdir} install -p -m 644 ${STAGING_DIR_TARGET}${datadir}/base-passwd/passwd.master ${STAGING_DIR_TARGET}${sysconfdir}/passwd install -p -m 644 ${STAGING_DIR_TARGET}${datadir}/base-passwd/group.master ${STAGING_DIR_TARGET}${sysconfdir}/group - install -p -m 644 ${STAGING_DIR_TARGET}${datadir}/base-passwd/login.defs ${STAGING_DIR_TARGET}/${sysconfdir}/login.defs fi } |