1 files changed, 78 insertions, 0 deletions
diff --git a/meta-emenlow/README b/meta-emenlow/README
new file mode 100644
index 000000000..862af5481
--- /dev/null
+++ b/meta-emenlow/README
@@ -0,0 +1,78 @@
+This README file contains information on building the meta-emenlow
+BSP layer using any of the supported machine configurations, and
+booting the images contained in the /binary directory.
+
+If you're only interested in booting the images in the /binary
+directory of a BSP tarball you've downloaded, there's nothing special
+to do - the appropriate images are already in the /binary directory
+depending on which BSP tarball you downloaded.
+
+Please see the corresponding sections below for details.
+
+
+Table of Contents
+=================
+
+ I. Building the meta-emenlow BSP layer
+II. Booting the images in /binary
+
+
+I. Building the meta-emenlow BSP layer
+=======================================
+
+In order to build an image with BSP support for emenlow, you just need
+to check out the poky master branch.
+
+Having done that, you can build an emenlow image by adding the
+location of the meta-emenlow layer to bblayers.conf e.g.:
+
+  yocto/meta-emenlow \
+
+To enable the emenlow layer, add the emenlow MACHINE to local.conf:
+
+  MACHINE ?= "emenlow"
+
+You should then be able to build an emenlow image as such:
+
+  $ source poky-init-build-env
+  $ bitbake poky-image-sato-live
+
+At the end of a successful build, you should have a live image that
+you can boot from a USB flash drive (see instructions on how to do
+that below, in the section 'Booting the images from /binary').
+
+
+II. Booting the images in /binary
+=================================
+
+This BSP contains bootable live images, which can be used to directly
+boot Yocto off of a USB flash drive.
+
+Under Linux, insert a USB flash drive.  Assuming the USB flash drive
+takes device /dev/sdf, use dd to copy the live image to it.  For
+example:
+
+# dd if=poky-image-sato-live-emenlow-20101207053738.hddimg of=/dev/sdf
+# sync
+# eject /dev/sdf
+
+This should give you a bootable USB flash device.  Insert the device
+into a bootable USB socket on the target, and power on.  This should
+result in a system booted to the Sato graphical desktop.
+
+If you want a terminal, use the arrows at the top of the UI to move to
+different pages of available applications, one of which is named
+'Terminal'.  Clicking that should give you a root terminal.
+
+If you want to ssh into the system, you can use the root terminal to
+ifconfig the IP address and use that to ssh in.  The root password is
+empty, so to log in type 'root' for the user name and hit 'Enter' at
+the Password prompt: and you should be in.
+
+----
+
+If you find you're getting corrupt images on the USB (it doesn't show
+the syslinux boot: prompt, or the boot: prompt contains strange
+characters), try doing this first:
+
+# dd if=/dev/zero of=/dev/sdf bs=1M count=512