diff options
Diffstat (limited to 'meta/packages/linux/linux-rp-2.6.24/spitz_h_rewrite.patch')
-rw-r--r-- | meta/packages/linux/linux-rp-2.6.24/spitz_h_rewrite.patch | 497 |
1 files changed, 0 insertions, 497 deletions
diff --git a/meta/packages/linux/linux-rp-2.6.24/spitz_h_rewrite.patch b/meta/packages/linux/linux-rp-2.6.24/spitz_h_rewrite.patch deleted file mode 100644 index df6d5f66c..000000000 --- a/meta/packages/linux/linux-rp-2.6.24/spitz_h_rewrite.patch +++ /dev/null @@ -1,497 +0,0 @@ -http://www.uwsg.indiana.edu/hypermail/linux/kernel/0802.1/3541.html - -Here is a rewrite of spitz.h, which includes comments documenting -function of particular GPIO pins. - -spitz_h_rewrite.patch provides: -- no changes in compiled code -- partial spitz.h rewrite: - * organized by function - * describes complete GPIO pinout - * comments added - * removed defines cloning pxa-regs.h -- prefer generic pxa-regs.h GPIO if available -- use GPIO names instead of numbers - -Thanks to Trisoft for providing needed information. - -Index: linux-2.6.24/arch/arm/mach-pxa/spitz_pm.c -=================================================================== ---- linux-2.6.24.orig/arch/arm/mach-pxa/spitz_pm.c 2008-01-24 22:58:37.000000000 +0000 -+++ linux-2.6.24/arch/arm/mach-pxa/spitz_pm.c 2008-02-13 13:49:22.000000000 +0000 -@@ -110,9 +110,9 @@ - pxa_gpio_mode(GPIO18_RDY|GPIO_OUT | GPIO_DFLT_HIGH); - - PRER = GPIO_bit(SPITZ_GPIO_KEY_INT); -- PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); -- PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC; -- PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET); -+ PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST); -+ PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST) | PWER_RTC; -+ PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(GPIO1_RST); - PKSR = 0xffffffff; // clear - - /* nRESET_OUT Disable */ -@@ -128,7 +128,7 @@ - static void spitz_postsuspend(void) - { - pxa_gpio_mode(GPIO18_RDY_MD); -- pxa_gpio_mode(10 | GPIO_IN); -+ pxa_gpio_mode(SPITZ_GPIO_NC_10 | GPIO_IN); - } - - static int spitz_should_wakeup(unsigned int resume_on_alarm) -Index: linux-2.6.24/drivers/video/pxafb.c -=================================================================== ---- linux-2.6.24.orig/drivers/video/pxafb.c 2008-02-13 13:49:04.000000000 +0000 -+++ linux-2.6.24/drivers/video/pxafb.c 2008-02-13 13:49:57.000000000 +0000 -@@ -920,7 +920,7 @@ - return; - } - -- for (gpio = 58; ldd_bits > 0; gpio++, ldd_bits--) { -+ for (gpio = GPIO58_LDD_0; ldd_bits > 0; gpio++, ldd_bits--) { - pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT); - } - pxa_gpio_mode(GPIO74_LCD_FCLK_MD); -Index: linux-2.6.24/include/asm-arm/arch-pxa/akita.h -=================================================================== ---- linux-2.6.24.orig/include/asm-arm/arch-pxa/akita.h 2008-01-24 22:58:37.000000000 +0000 -+++ linux-2.6.24/include/asm-arm/arch-pxa/akita.h 2008-02-13 13:49:22.000000000 +0000 -@@ -12,11 +12,11 @@ - /* Akita IO Expander GPIOs */ - - #define AKITA_IOEXP_RESERVED_7 (1 << 7) --#define AKITA_IOEXP_IR_ON (1 << 6) --#define AKITA_IOEXP_AKIN_PULLUP (1 << 5) --#define AKITA_IOEXP_BACKLIGHT_CONT (1 << 4) --#define AKITA_IOEXP_BACKLIGHT_ON (1 << 3) --#define AKITA_IOEXP_MIC_BIAS (1 << 2) -+#define AKITA_IOEXP_IR_ON (1 << 6) /* IrDA On */ -+#define AKITA_IOEXP_AKIN_PULLUP (1 << 5) /* Pull-Up for Remote */ -+#define AKITA_IOEXP_BACKLIGHT_CONT (1 << 4) /* Backlight Control */ -+#define AKITA_IOEXP_BACKLIGHT_ON (1 << 3) /* Backlight On */ -+#define AKITA_IOEXP_MIC_BIAS (1 << 2) /* Mic Bias On */ - #define AKITA_IOEXP_RESERVED_1 (1 << 1) - #define AKITA_IOEXP_RESERVED_0 (1 << 0) - -Index: linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h -=================================================================== ---- linux-2.6.24.orig/include/asm-arm/arch-pxa/pxa-regs.h 2008-02-13 13:49:07.000000000 +0000 -+++ linux-2.6.24/include/asm-arm/arch-pxa/pxa-regs.h 2008-02-13 13:49:22.000000000 +0000 -@@ -1334,6 +1334,7 @@ - #define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ - #define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ - #define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ -+#define GPIO104_pSKTSEL 104 /* PCMCIA Socket Select (PXA27x) */ - #define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ - #define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ - #define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ -Index: linux-2.6.24/include/asm-arm/arch-pxa/spitz.h -=================================================================== ---- linux-2.6.24.orig/include/asm-arm/arch-pxa/spitz.h 2008-02-13 13:49:01.000000000 +0000 -+++ linux-2.6.24/include/asm-arm/arch-pxa/spitz.h 2008-02-13 13:49:22.000000000 +0000 -@@ -1,8 +1,9 @@ - /* -- * Hardware specific definitions for SL-Cx000 series of PDAs -+ * Hardware specific definitions for SL-Cxx00 series of PDAs - * - * Copyright (c) 2005 Alexander Wykes - * Copyright (c) 2005 Richard Purdie -+ * Copyright (c) 2008 Stanislav Brabec - * - * Based on Sharp's 2.4 kernel patches - * -@@ -13,140 +14,257 @@ - */ - #ifndef __ASM_ARCH_SPITZ_H - #define __ASM_ARCH_SPITZ_H 1 --#endif - --#include <linux/fb.h> -+#include <asm-arm/arch-pxa/irqs.h> -+#include <linux/platform_device.h> - - /* Spitz/Akita GPIOs */ - --#define SPITZ_GPIO_KEY_INT (0) /* Key Interrupt */ --#define SPITZ_GPIO_RESET (1) --#define SPITZ_GPIO_nSD_DETECT (9) --#define SPITZ_GPIO_TP_INT (11) /* Touch Panel interrupt */ --#define SPITZ_GPIO_AK_INT (13) /* Remote Control */ --#define SPITZ_GPIO_ADS7846_CS (14) --#define SPITZ_GPIO_SYNC (16) --#define SPITZ_GPIO_MAX1111_CS (20) --#define SPITZ_GPIO_FATAL_BAT (21) --#define SPITZ_GPIO_HSYNC (22) --#define SPITZ_GPIO_nSD_CLK (32) --#define SPITZ_GPIO_USB_DEVICE (35) --#define SPITZ_GPIO_USB_HOST (37) --#define SPITZ_GPIO_USB_CONNECT (41) --#define SPITZ_GPIO_LCDCON_CS (53) --#define SPITZ_GPIO_nPCE (54) --#define SPITZ_GPIO_nSD_WP (81) --#define SPITZ_GPIO_ON_RESET (89) --#define SPITZ_GPIO_BAT_COVER (90) --#define SPITZ_GPIO_CF_CD (94) --#define SPITZ_GPIO_ON_KEY (95) --#define SPITZ_GPIO_SWA (97) --#define SPITZ_GPIO_SWB (96) --#define SPITZ_GPIO_CHRG_FULL (101) --#define SPITZ_GPIO_CO (101) --#define SPITZ_GPIO_CF_IRQ (105) --#define SPITZ_GPIO_AC_IN (115) --#define SPITZ_GPIO_HP_IN (116) -+/* This list refers to all GPIO pins either in defines or in comments. -+ * -+ * GPIO pins not listed: -+ * GPIO2 SYS_EN: System Power Enable -+ * GPIO5-GPIO8 PWR_CAP0-PWR_CAP3: sleep DC-DC converter power capacitors -+ * GPIO40 not connected -+ */ - --/* Spitz Only GPIOs */ - --#define SPITZ_GPIO_CF2_IRQ (106) /* CF slot1 Ready */ --#define SPITZ_GPIO_CF2_CD (93) -+/* Spitz/Akita System GPIO */ -+ -+#define SPITZ_GPIO_KEY_INT (0) /* Key Interrupt */ -+#define SPITZ_GPIO_SYNC (16) /* IOPORT Wake Up (input) */ -+#define SPITZ_GPIO_NAND_CS (79) /* NAND Flash Chip Select */ -+#define SPITZ_GPIO_NC_10 (10) /* Not Connected (but used in kernel) */ -+/* This GPIO pin is connected: -+ * GPIO1_RST -+ */ - - -+/* Compact Flash Interface */ -+ -+/* Spitz/Akita Compact Flash Interface */ -+#define SPITZ_GPIO_CF_CD (94) /* CF IRQ */ -+#define SPITZ_GPIO_CF_IRQ (105) /* CF Ready */ -+/* These GPIO pins are connected: -+ * GPIO48_nPOE -+ * GPIO49_nPWE -+ * GPIO50_nPIOR -+ * GPIO51_nPIOW -+ * GPIO54_nPCE_2 -+ * GPIO55_nPREG -+ * GPIO56_nPWAIT -+ * GPIO57_nIOIS16 -+ * GPIO80_nCS_4 -+ * GPIO85_nPCE_1 -+ * GPIO104_pSKTSEL -+ */ -+ -+/* Spitz only Compact Flash Interface */ -+#define SPITZ_GPIO_CF2_CD (93) /* CF slot1 IRQ */ -+#define SPITZ_GPIO_CF2_IRQ (106) /* CF slot1 Ready */ -+/* This GPIO pin is connected: -+ * GPIO78_nCS_2 -+ */ -+ -+ -+/* Spitz/Akita Battery, Power and Service Connector */ -+ -+#define SPITZ_GPIO_FATAL_BAT (21) /* Fatal Battery */ -+#define SPITZ_GPIO_BAT_COVER (90) /* Battery Cover switch */ -+#define SPITZ_GPIO_BAT_COVER2 (15) /* Battery Cover switch, parallel pin */ -+#define SPITZ_GPIO_CHRG_FULL (101) /* Battery Full */ -+#define SPITZ_GPIO_AC_IN (115) /* External Power Supply is active */ -+#define SPITZ_GPIO_ON_RESET (89) /* Software Reset */ -+#define SPITZ_GPIO_SERVICE0 (83) /* Service Connector */ -+#define SPITZ_GPIO_SERVICE1 (84) /* Service Connector */ -+/* This GPIO pin is connected: -+ * GPIO18_RDY -+ */ -+ -+ -+/* Spitz/Akita Display Controller */ -+ -+#define SPITZ_GPIO_HSYNC (22) /* Line Sync Feedback */ -+/* These GPIO pins are connected: -+ * GPIO58_LDD_0-GPIO58_LDD_15 -+ * GPIO74_LCD_FCLK -+ * GPIO75_LCD_LCLK -+ * GPIO76_LCD_PCLK -+ * GPIO77_LCD_ACBIAS -+ */ -+ -+ -+/* Spitz/Akita SSP/SPI Bus and Devices */ -+ -+#define SPITZ_GPIO_SSP_CLK (19) /* SSP bus Clock */ -+#define SPITZ_GPIO_SSP_RXD (86) /* SSP bus RxD */ -+#define SPITZ_GPIO_SSP_TXD (87) /* SSP bus TxD */ -+#define SPITZ_GPIO_TP_INT (11) /* Touch Panel IRQ */ -+#define SPITZ_GPIO_ADS7846_CS (14) /* Touch Panel Controller Chip Select */ -+#define SPITZ_GPIO_MAX1111_CS (20) /* Multi Channel ADC Chip Select */ -+#define SPITZ_GPIO_LCDCON_CS (53) /* LCD Controller Chip Select */ -+ -+ -+/* Spitz/Akita Supplementary USB OTG Pins */ -+ -+#define SPITZ_GPIO_USB_DEVICE (35) /* USB Client power is present */ -+#define SPITZ_GPIO_USB_HOST (37) /* USB OTG 5V Host power supply control */ -+#define SPITZ_GPIO_USB_CONNECT (41) /* USB Host Cable is connected */ -+ -+ -+/* Spitz/Akita Audio */ -+ -+#define SPITZ_GPIO_HP_IN (116) /* CPU Headphone detect */ -+#define SPITZ_GPIO_AK_INT (13) /* Remote Control detect */ -+/* These GPIO AC97 pins are connected: -+ * GPIO28_BITCLK -+ * GPIO29_SDATA_IN -+ * GPIO30_SDATA_OUT -+ * GPIO31_SYNC -+ * GPIO113_AC97_RESET_N -+ */ -+ -+ -+/* Spitz/Akita SD Slot */ -+ -+#define SPITZ_GPIO_nSD_DETECT (9) /* SD Card Presence */ -+#define SPITZ_GPIO_nSD_WP (81) /* SD Write Protection */ -+/* These GPIO pins are connected: -+ * GPIO32_MMCCLK -+ * GPIO92_MMCDAT0 -+ * GPIO109_MMCDAT1 -+ * GPIO110_MMCDAT2 -+ * GPIO111_MMCDAT3 -+ * GPIO112_MMCCMD -+ */ -+ -+/* Spitz/Akita I2C bus */ -+#define SPITZ_GPIO_SCL (117) /* I2C SCL */ -+#define SPITZ_GPIO_SDA (118) /* I2C SDA */ -+#define SPITZ_GPIO_PWR_SCL (3) /* I2C SCL power */ -+#define SPITZ_GPIO_PWR_SDA (4) /* I2C SDA power */ -+ -+/* audio codec pins */ -+ -+ -+/* Spitz/Akita UART ports */ -+ -+/* Fully Featured UART - connected to IOPORT connector */ -+#define SPITZ_GPIO_FFRXD (102) /* IOPORT has nRXD inverted levels */ -+#define SPITZ_GPIO_FFTXD (99) /* IOPORT has nTXD inverted levels */ -+#define SPITZ_GPIO_FFRTS (98) -+#define SPITZ_GPIO_FFCTS (100) -+#define SPITZ_GPIO_FFDTR (82) -+#define SPITZ_GPIO_FFDSR (33) -+ -+/* These UART GPIO pins are connected to Bluetooth -+ * (only on Akita version with Bluetooth) -+ * GPIO42_BTRXD -+ * GPIO43_BTTXD -+ * GPIO44_BTCTS -+ * GPIO45_BTRTS -+ */ -+ -+/* These UART GPIO pins are connected to IrDA: -+ * GPIO46_STRXD -+ * GPIO47_STTXD -+ */ -+ - /* Spitz/Akita Keyboard Definitions */ - --#define SPITZ_KEY_STROBE_NUM (11) --#define SPITZ_KEY_SENSE_NUM (7) --#define SPITZ_GPIO_G0_STROBE_BIT 0x0f800000 --#define SPITZ_GPIO_G1_STROBE_BIT 0x00100000 --#define SPITZ_GPIO_G2_STROBE_BIT 0x01000000 --#define SPITZ_GPIO_G3_STROBE_BIT 0x00041880 --#define SPITZ_GPIO_G0_SENSE_BIT 0x00021000 --#define SPITZ_GPIO_G1_SENSE_BIT 0x000000d4 --#define SPITZ_GPIO_G2_SENSE_BIT 0x08000000 --#define SPITZ_GPIO_G3_SENSE_BIT 0x00000000 -- --#define SPITZ_GPIO_KEY_STROBE0 88 --#define SPITZ_GPIO_KEY_STROBE1 23 --#define SPITZ_GPIO_KEY_STROBE2 24 --#define SPITZ_GPIO_KEY_STROBE3 25 --#define SPITZ_GPIO_KEY_STROBE4 26 --#define SPITZ_GPIO_KEY_STROBE5 27 --#define SPITZ_GPIO_KEY_STROBE6 52 --#define SPITZ_GPIO_KEY_STROBE7 103 --#define SPITZ_GPIO_KEY_STROBE8 107 --#define SPITZ_GPIO_KEY_STROBE9 108 --#define SPITZ_GPIO_KEY_STROBE10 114 -- --#define SPITZ_GPIO_KEY_SENSE0 12 --#define SPITZ_GPIO_KEY_SENSE1 17 --#define SPITZ_GPIO_KEY_SENSE2 91 --#define SPITZ_GPIO_KEY_SENSE3 34 --#define SPITZ_GPIO_KEY_SENSE4 36 --#define SPITZ_GPIO_KEY_SENSE5 38 --#define SPITZ_GPIO_KEY_SENSE6 39 -+#define SPITZ_KEY_STROBE_NUM (11) -+#define SPITZ_KEY_SENSE_NUM (7) -+#define SPITZ_GPIO_G0_STROBE_BIT 0x0f800000 -+#define SPITZ_GPIO_G1_STROBE_BIT 0x00100000 -+#define SPITZ_GPIO_G2_STROBE_BIT 0x01000000 -+#define SPITZ_GPIO_G3_STROBE_BIT 0x00041880 -+#define SPITZ_GPIO_G0_SENSE_BIT 0x00021000 -+#define SPITZ_GPIO_G1_SENSE_BIT 0x000000d4 -+#define SPITZ_GPIO_G2_SENSE_BIT 0x08000000 -+#define SPITZ_GPIO_G3_SENSE_BIT 0x00000000 -+#define SPITZ_GPIO_KEY_STROBE0 (88) -+#define SPITZ_GPIO_KEY_STROBE1 (23) -+#define SPITZ_GPIO_KEY_STROBE2 (24) -+#define SPITZ_GPIO_KEY_STROBE3 (25) -+#define SPITZ_GPIO_KEY_STROBE4 (26) -+#define SPITZ_GPIO_KEY_STROBE5 (27) -+#define SPITZ_GPIO_KEY_STROBE6 (52) -+#define SPITZ_GPIO_KEY_STROBE7 (103) -+#define SPITZ_GPIO_KEY_STROBE8 (107) -+#define SPITZ_GPIO_KEY_STROBE9 (108) -+#define SPITZ_GPIO_KEY_STROBE10 (114) -+#define SPITZ_GPIO_KEY_SENSE0 (12) -+#define SPITZ_GPIO_KEY_SENSE1 (17) -+#define SPITZ_GPIO_KEY_SENSE2 (91) -+#define SPITZ_GPIO_KEY_SENSE3 (34) -+#define SPITZ_GPIO_KEY_SENSE4 (36) -+#define SPITZ_GPIO_KEY_SENSE5 (38) -+#define SPITZ_GPIO_KEY_SENSE6 (39) -+ -+#define SPITZ_GPIO_SWA (97) /* Keyboard Interrupt A */ -+#define SPITZ_GPIO_SWB (96) /* Keyboard Interrupt B */ -+#define SPITZ_GPIO_ON_KEY (95) /* Power On Key */ - - --/* Spitz Scoop Device (No. 1) GPIOs */ -+/* Spitz/Akita Scoop Device (No. 1) GPIOs */ - /* Suspend States in comments */ --#define SPITZ_SCP_LED_GREEN SCOOP_GPCR_PA11 /* Keep */ --#define SPITZ_SCP_JK_B SCOOP_GPCR_PA12 /* Keep */ --#define SPITZ_SCP_CHRG_ON SCOOP_GPCR_PA13 /* Keep */ --#define SPITZ_SCP_MUTE_L SCOOP_GPCR_PA14 /* Low */ --#define SPITZ_SCP_MUTE_R SCOOP_GPCR_PA15 /* Low */ --#define SPITZ_SCP_CF_POWER SCOOP_GPCR_PA16 /* Keep */ --#define SPITZ_SCP_LED_ORANGE SCOOP_GPCR_PA17 /* Keep */ --#define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Low */ --#define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Low */ -+#define SPITZ_SCP_LED_GREEN SCOOP_GPCR_PA11 /* Green LED, Keep */ -+#define SPITZ_SCP_JK_B SCOOP_GPCR_PA12 /* Fast Charge On, Keep */ -+#define SPITZ_SCP_CHRG_ON SCOOP_GPCR_PA13 /* Charge On, Keep */ -+#define SPITZ_SCP_MUTE_L SCOOP_GPCR_PA14 /* Extra Mute Left, Low */ -+#define SPITZ_SCP_MUTE_R SCOOP_GPCR_PA15 /* Extra Mute Right, Low */ -+#define SPITZ_SCP_CF_POWER SCOOP_GPCR_PA16 /* CF+SD Power Circuit, Keep */ -+#define SPITZ_SCP_LED_ORANGE SCOOP_GPCR_PA17 /* Orange LED, Keep */ -+#define SPITZ_SCP_JK_A SCOOP_GPCR_PA18 /* Dummy Load, Low */ -+#define SPITZ_SCP_ADC_TEMP_ON SCOOP_GPCR_PA19 /* Battery Sensor On, Low */ - - #define SPITZ_SCP_IO_DIR (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \ -- SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \ -- SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) -+ SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \ -+ SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) - #define SPITZ_SCP_IO_OUT (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R) - #define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON) - #define SPITZ_SCP_SUS_SET 0 - - /* Spitz Scoop Device (No. 2) GPIOs */ --/* Suspend States in comments */ --#define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* High */ --#define SPITZ_SCP2_AKIN_PULLUP SCOOP_GPCR_PA12 /* Keep */ --#define SPITZ_SCP2_RESERVED_1 SCOOP_GPCR_PA13 /* High */ --#define SPITZ_SCP2_RESERVED_2 SCOOP_GPCR_PA14 /* Low */ --#define SPITZ_SCP2_RESERVED_3 SCOOP_GPCR_PA15 /* Low */ --#define SPITZ_SCP2_RESERVED_4 SCOOP_GPCR_PA16 /* Low */ --#define SPITZ_SCP2_BACKLIGHT_CONT SCOOP_GPCR_PA17 /* Low */ --#define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Low */ --#define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Low */ -+/* Suspend States in comments -+ * Spitz only, Akita uses corresponding AKITA_IOEXP_ */ -+#define SPITZ_SCP2_IR_ON SCOOP_GPCR_PA11 /* IrDA On, High */ -+#define SPITZ_SCP2_AKIN_PULLUP SCOOP_GPCR_PA12 /* Pull-Up for Remote, Keep */ -+#define SPITZ_SCP2_RESERVED_1 SCOOP_GPCR_PA13 /* High */ -+#define SPITZ_SCP2_RESERVED_2 SCOOP_GPCR_PA14 /* Low */ -+#define SPITZ_SCP2_RESERVED_3 SCOOP_GPCR_PA15 /* Low */ -+#define SPITZ_SCP2_RESERVED_4 SCOOP_GPCR_PA16 /* Low */ -+#define SPITZ_SCP2_BACKLIGHT_CONT SCOOP_GPCR_PA17 /* Backlight Control, Low */ -+#define SPITZ_SCP2_BACKLIGHT_ON SCOOP_GPCR_PA18 /* Backlight On, Low */ -+#define SPITZ_SCP2_MIC_BIAS SCOOP_GPCR_PA19 /* Mic Bias On, Low */ - - #define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \ -- SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ -- SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) -+ SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ -+ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) - - #define SPITZ_SCP2_IO_OUT (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1) - #define SPITZ_SCP2_SUS_CLR (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \ -- SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) -+ SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS) - #define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1) - - --/* Spitz IRQ Definitions */ -+/* Spitz/Akita IRQ Definitions */ - --#define SPITZ_IRQ_GPIO_KEY_INT IRQ_GPIO(SPITZ_GPIO_KEY_INT) --#define SPITZ_IRQ_GPIO_AC_IN IRQ_GPIO(SPITZ_GPIO_AC_IN) --#define SPITZ_IRQ_GPIO_AK_INT IRQ_GPIO(SPITZ_GPIO_AK_INT) --#define SPITZ_IRQ_GPIO_HP_IN IRQ_GPIO(SPITZ_GPIO_HP_IN) --#define SPITZ_IRQ_GPIO_TP_INT IRQ_GPIO(SPITZ_GPIO_TP_INT) --#define SPITZ_IRQ_GPIO_SYNC IRQ_GPIO(SPITZ_GPIO_SYNC) --#define SPITZ_IRQ_GPIO_ON_KEY IRQ_GPIO(SPITZ_GPIO_ON_KEY) --#define SPITZ_IRQ_GPIO_SWA IRQ_GPIO(SPITZ_GPIO_SWA) --#define SPITZ_IRQ_GPIO_SWB IRQ_GPIO(SPITZ_GPIO_SWB) -+#define SPITZ_IRQ_GPIO_KEY_INT IRQ_GPIO(SPITZ_GPIO_KEY_INT) -+#define SPITZ_IRQ_GPIO_AC_IN IRQ_GPIO(SPITZ_GPIO_AC_IN) -+#define SPITZ_IRQ_GPIO_AK_INT IRQ_GPIO(SPITZ_GPIO_AK_INT) -+#define SPITZ_IRQ_GPIO_HP_IN IRQ_GPIO(SPITZ_GPIO_HP_IN) -+#define SPITZ_IRQ_GPIO_TP_INT IRQ_GPIO(SPITZ_GPIO_TP_INT) -+#define SPITZ_IRQ_GPIO_SYNC IRQ_GPIO(SPITZ_GPIO_SYNC) -+#define SPITZ_IRQ_GPIO_ON_KEY IRQ_GPIO(SPITZ_GPIO_ON_KEY) -+#define SPITZ_IRQ_GPIO_SWA IRQ_GPIO(SPITZ_GPIO_SWA) -+#define SPITZ_IRQ_GPIO_SWB IRQ_GPIO(SPITZ_GPIO_SWB) - #define SPITZ_IRQ_GPIO_BAT_COVER IRQ_GPIO(SPITZ_GPIO_BAT_COVER) - #define SPITZ_IRQ_GPIO_FATAL_BAT IRQ_GPIO(SPITZ_GPIO_FATAL_BAT) --#define SPITZ_IRQ_GPIO_CO IRQ_GPIO(SPITZ_GPIO_CO) --#define SPITZ_IRQ_GPIO_CF_IRQ IRQ_GPIO(SPITZ_GPIO_CF_IRQ) --#define SPITZ_IRQ_GPIO_CF_CD IRQ_GPIO(SPITZ_GPIO_CF_CD) --#define SPITZ_IRQ_GPIO_CF2_IRQ IRQ_GPIO(SPITZ_GPIO_CF2_IRQ) --#define SPITZ_IRQ_GPIO_nSD_INT IRQ_GPIO(SPITZ_GPIO_nSD_INT) -+#define SPITZ_IRQ_GPIO_CF_IRQ IRQ_GPIO(SPITZ_GPIO_CF_IRQ) -+#define SPITZ_IRQ_GPIO_CF_CD IRQ_GPIO(SPITZ_GPIO_CF_CD) -+#define SPITZ_IRQ_GPIO_CF2_IRQ IRQ_GPIO(SPITZ_GPIO_CF2_IRQ) -+#define SPITZ_IRQ_GPIO_nSD_INT IRQ_GPIO(SPITZ_GPIO_nSD_INT) - #define SPITZ_IRQ_GPIO_nSD_DETECT IRQ_GPIO(SPITZ_GPIO_nSD_DETECT) - - /* -@@ -156,3 +274,5 @@ - extern struct platform_device spitzscoop2_device; - extern struct platform_device spitzssp_device; - extern struct sharpsl_charger_machinfo spitz_pm_machinfo; -+ -+#endif -Index: linux-2.6.24/sound/arm/pxa2xx-ac97.c -=================================================================== ---- linux-2.6.24.orig/sound/arm/pxa2xx-ac97.c 2008-01-24 22:58:37.000000000 +0000 -+++ linux-2.6.24/sound/arm/pxa2xx-ac97.c 2008-02-13 13:49:22.000000000 +0000 -@@ -133,10 +133,10 @@ - #ifdef CONFIG_PXA27x - /* warm reset broken on Bulverde, - so manually keep AC97 reset high */ -- pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH); -+ pxa_gpio_mode(GPIO113_AC97_RESET_N | GPIO_OUT | GPIO_DFLT_HIGH); - udelay(10); - GCR |= GCR_WARM_RST; -- pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); -+ pxa_gpio_mode(GPIO113_AC97_RESET_N_MD); - udelay(500); - #else - GCR |= GCR_WARM_RST|GCR_PRIRDY_IEN|GCR_SECRDY_IEN; -@@ -335,7 +335,7 @@ - pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); - #ifdef CONFIG_PXA27x - /* Use GPIO 113 as AC97 Reset on Bulverde */ -- pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); -+ pxa_gpio_mode(GPIO113_AC97_RESET_N_MD); - #endif - pxa_set_cken(CKEN_AC97, 1); - |