summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* kernel.bbclass: remove unintended change of INITRAMFS_TASKAndrea Adami2011-07-141-1/+1
| | | | | | | | | | | | * during an unfortunate round of tests right before commiting the patch * do_configure[depends] became kernel_do_configure[depends] * Nonsense! * As documented in commit 4dfef62dfe54a3b2c557a6df81d155adc1e03ccb * of OpenEmbedded git server, this must be in do_configure[depends] * to do the magic. Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane: make GNU_HASH check slightly more robust (avoids false negatives ↵Phil Blundell2011-07-141-11/+33
| | | | | | | | | | | with gold); add check for useless rpaths It isn't safe to make assumptions about the order of the entries in the dynamic section. Fix the ldflags test to cope with the case where GNU_HASH comes before NEEDED and/or INIT. Also, add a new warning for binaries which contain useless (but benign) rpath entries pointing to the default search locations. Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* openssl: pass ${mandir} explicitly to "make install"Phil Blundell2011-07-142-2/+2
| | | | | | | Otherwise it will use the openssl internal default of /usr/share/man which may not be correct. Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ncurses: Fix site_configMark Hatle2011-07-141-0/+0
| | | | | | | The site_config directory should have been attached to ncurses. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libpcre: Add bzip2, zlib and readline to DEPENDSTom Rini2011-07-141-0/+1
| | | | | | | | | | | libpcre will build, if found, optional support for bzip2/zlib in pcregrep and a readline frontend to pcretest. It will not however listen to --disable-pcregrep-{libz,libbz2} and will still build these if found. So we add bzip2, zlib and readline to DEPENDS to make sure that we get consistent builds. Signed-off-by: Tom Rini <tom_rini@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* groff: Disable x11 supportTom Rini2011-07-141-0/+1
| | | | | | | | groff will build with, or without x11 support depending on if X has been built already or not. Disable x11 support for consistency. Signed-off-by: Tom Rini <tom_rini@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* hicolor-icon-theme: Use ${BPN}-${PV} not ${P} to unbreak nativesdkTom Rini2011-07-141-1/+1
| | | | | Signed-off-by: Tom Rini <tom_rini@mentor.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* opkg-utils: Print out License fieldKhem Raj2011-07-142-1/+41
| | | | | Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* package_ipk: add License field to control fileKoen Kooi2011-07-141-0/+1
| | | | | | | | Port of oe.dev Revision e35d1ffad1553f259b084578992f15d10f590f98 Signed-off-by: Koen Kooi <koen@openembedded.org> Signed-off-by: Khem Raj <raj.khem@gmail.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* eglibc: fix runtime assertion failureNitin A Kamble2011-07-132-0/+180
| | | | | | | | | | | | This fixes bug [YOCTO #1237] Runtime assertion errors were observed: Inconsistency detected by ld.so: dl-deps.c: 622: _dl_map_object_deps: Assertion `nlist > 1' failed! A fix was available for this issue: http://sourceware.org/bugzilla/show_bug.cgi?id=12454 Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
* eglibc: fix installed but not packaged filesNitin A Kamble2011-07-131-0/+4
| | | | | | | | | Fixes these package QA warnings: WARNING: For recipe eglibc, the following files were installed but not shipped in any package: WARNING: /etc/localtime Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
* binutils: package unpackaged filesNitin A Kamble2011-07-134-3/+5
| | | | | | | | | To fix these package qa warnings WARNING: For recipe binutils, the following files were installed but not shipped in any package: WARNING: /usr/bin/ld.bfd WARNING: /usr/bin/elfedit Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
* pulseaudio: enable bluetooth supportKoen Kooi2011-07-133-4/+4
| | | | | Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* connman-gnome: run oe-stylize over recipeKoen Kooi2011-07-131-2/+15
| | | | | | | Variable ordering changed slightly and the RRECOMMENDS line is broken up, no functional changes Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ofono: fix packaging and clean up custom do_installKoen Kooi2011-07-133-3/+4
| | | | | | | | | | | The makefile installs the udev rule in the proper place already. Also fix: WARNING: For recipe ofono, the following files were installed but not shipped in any package: WARNING: /lib/udev/rules.d/97-ofono.rules WARNING: /lib/systemd/system/ofono.service Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* distro-tracking: add RECIPE_MANUAL_CHECK_DATE for various recipesScott Garman2011-07-131-0/+7
| | | | | | | | | | | | | | | | The upstream package tracking webapp needs this additional distro tracking field to work properly for the following recipes I maintain: * icu * blktool * apmd * gperf * dosfstools * insserv * at Signed-off-by: Scott Garman <scott.a.garman@intel.com>
* Patches: Fix Upstream-Status infoSaul Wold2011-07-1320-99/+15
| | | | Signed-off-by: Saul Wold <sgw@linux.intel.com>
* classes/image_types: add a variable to list available IMAGE_FSTYPE'sJoshua Lock2011-07-131-0/+2
| | | | | | | | This is for use in the Hob GUI to enable the user to change the type of the generated image. Signed-off-by: Joshua Lock <josh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* glibc: fix false failureNitin A Kamble2011-07-131-1/+1
| | | | | | do not just fail if grep does not match the locale name in the list Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
* kernel.bbclass: fix the broken linesNitin A Kamble2011-07-131-2/+2
| | | | | Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
* libzypp: fix for non /usr/lib libdir caseYu Ke2011-07-132-2/+25
| | | | | | | | this patch has two fixes: 1. the src tool/CMakeLists.txt has hardcode "lib", so add a patch to fix it 2. the recipe has hardcode "-DLIB=lib", so replace it with libdir Signed-off-by: Yu Ke <ke.yu@intel.com>
* sat-solver: fix for non /usr/lib libdir caseYu Ke2011-07-132-2/+8
| | | | | | | | | | | | | | | | | | | | when libdir set to non /usr/lib like /usr/lib64, there is do_configure error: " -- Libraries will be installed in /usr/lib CMake Error at /home/kyu3/sdb/lib64/tmp/sysroots/x86_64-linux/usr/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:91 (MESSAGE): Please install 'check' and 'check-devel' packages (missing: CHECK_LIBRARY) Call Stack (most recent call first): /home/kyu3/sdb/lib64/tmp/sysroots/x86_64-linux/usr/share/cmake-2.8/Modules/FindPackageHandleStandardArgs.cmake:252 (_FPHSA_FAILURE_MESSAGE) cmake/modules/FindCheck.cmake:17 (FIND_PACKAGE_HANDLE_STANDARD_ARGS) CMakeLists.txt:35 (FIND_PACKAGE) -- Configuring incomplete, errors occurred! " The reason is that cmake did not search /usr/lib64 for libcheck, thus report error add ${libdir} to the CMAKE_SYSTEM_LIBRARY_PATH can fix this issue. Signed-off-by: Yu Ke <ke.yu@intel.com>
* eglibc: ensure that NSS libs go into the right package when ${base_libdir} ↵Phil Blundell2011-07-132-3/+3
| | | | | | | | | | | and ${libdir} are the same Previously, libnss_hesiod et al. could get swallowed by the wildcarded glob in ${PN}-dev. Fix it by moving eglibc-extra-nss earlier in the PACKAGES and adjusting its FILES to ensure that the devel symlinks don't get caught. Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* xserver-kdrive: add patch upstream status infoYu Ke2011-07-1331-1440/+73
| | | | | | | - add patch upstream status - also remove the obsolete xserver-kdrive-1.3.0.0 patches Signed-off-by: Yu Ke <ke.yu@intel.com>
* python: Fix libdir usage which broke python packagingRichard Purdie2011-07-132-2/+2
| | | | Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sato-sdk: add clutter for sato-sdk imageYu Ke2011-07-121-1/+3
| | | | | | | | | | | Yocto ADT has Eclips clutter template, so it is better to have clutter in SDK image to support ADT. this patch add clutter and clutter-box2d app to sato-sdk image for this purpose Fix [YOCTO #891] Signed-off-by: Yu Ke <ke.yu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* insane.bbclass: skip rdepends QA checks for kernel / modulesPaul Eggleton2011-07-121-0/+5
| | | | | | | | | | The kernel and module recipes have very few dbg/dev packages, however they can easily have false positive results from the rdepends QA checks (e.g. kernel-module-lirc-dev). Thus disable these tests for any recipe that inherits kernel or module-base. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bluez-dtl1-workaround: deletedPhil Blundell2011-07-123-422/+0
| | | | | Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel.bbclass, task-base: remove references to obsolete bluez-dtl1-workaroundPhil Blundell2011-07-122-10/+0
| | | | | Signed-off-by: Phil Blundell <philb@gnu.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* busybox: fix missing features due to lack of variable expansionPaul Eggleton2011-07-122-3/+3
| | | | | | | | Expand DISTRO_FEATURES and MACHINE_FEATURES fully so that any inner variable references (such as DISTRO_FEATURES_LIBC) are expanded properly. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bb-matrix: initial scripts to record TIME(1) metrics for BB and PM combinationsDarren Hart2011-07-122-0/+215
| | | | | | | | | | | | | | The bb-matrix.sh script will run a bitbake command, building core-image-minimal by default, for various combinations of BB_NUMBER_THREADS and PARALLEL_MAKE. It records all relevant metrics of the TIME(1) command for each combination in a data file. The bb-matrix-plot.sh script can be used to visualize each of these metrics via a 3d surface plot, either solid surface or wireframe with a value-map projection on the XY plane. Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* pulseaudio: make it work out of the boxKoen Kooi2011-07-123-2/+6
| | | | | | | | | | | | | | | | * reuse 'audio' group as access group The current failure is: root@usrp-e1xx:/etc/pulse# pulseaudio --system [..] W: protocol-native.c: Failed to get GID of group 'pulse-access' W: protocol-native.c: Failed to check group membership. W: protocol-native.c: Denied access to client with invalid authorization data. * add more required modules Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel.bbclass: handle embedding of initramfs imagesAndrea Adami2011-07-121-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * "All 2.6 Linux kernels contain a gzipped "cpio" format archive, which is * extracted into rootfs when the kernel boots up." * (http://www.kernel.org/doc/Documentation/filesystems/ramfs-rootfs-initramfs.txt) * * In some cases it can be useful to take advantage of this ability and embed your * customized rootfs ("the move to early userspace is necessary because finding * and mounting the real root device is complex"). * * Therefore, some code was added and since 2009 OpenEmbedded metadata * provides a convenient way to include your initramfs by setting * INITRAMFS_IMAGE = "your_initramfs_image.bb" * and specifying the chosen output format in the initramfs image recipe, e.g. * IMAGE_FSTYPES = "cpio.gz cpio.lzma" * * * Patch was imported from the OpenEmbedded git server * (git://git.openembedded.org/openembedded) * * Add satndalone task "builtin_initramfs". * commit 72761e468bb3e905459f2b81ce1bc4d80419481f * Signed-off-by:Paul Sokolovsky <pmiscml@gmail.com> * * 'Remove usage of non-standard variables (DEPLOY_TO) and random renaming * of output.' * commit 456ba7ffd159821e86ad7ad4b66ec7d5790bd054 * Richard Purdie <rpurdie@rpsys.net> * * 'Fis typo in do_builtin_initramfs.' * commit 37f2fe4b801df832e93553a08eff24fec736c7d4 * Signed-off-by:Paul Sokolovsky <pmiscml@gmail.com> * * 'comment initramfs stuff till rootfs locking works properly (initramfs * should be optional as well)' * commit 2818d8b7be1a0d9a59ad3528091d47517d59328b * Signed-off-by: Koen Kooi <koen@openembedded.org> * * 'get initramfs stuff working * commit 1642b3e8fc81c666713951fdd4e7ff9a50d1c5a8 * Signed-off-by: Thomas Kunze <thommycheck@gmx.de> * * 'Fix INITRAMFS logic to stop breaking builds for people not using it' * commit dcf3049eb9eedf0838af59969b3f70a43298d3d7 * Signed-off-by: Richard Purdie <rpurdie@rpsys.net> * * '-change initramfs-logic' * commit 3e3f297457138e96e2b652658675796853eb0293 * Signed-off-by: Thomas Kunze <thommycheck@gmx.de> * * 'move initramfs stuff to configure so we can do postprocessing * on it with do_configure_append' * commit fc03e2be0b4470748a8b7707cea7293303adc424 * Signed-off-by: Koen Kooi <koen@openembedded.org> * * 'copy gz, lzo, lzma initramfs cpio images.' * commit 572abc3fdd1076ca35d8c15d269cc9d862101805 * Signed-off-by: Andrea Adami <andrea.adami@gmail.com> * * 'move the kernel size check to linux-kexecboot.inc.' * commit 45f82a941c77e9d747814fa1e337ba803475d327 * Signed-off-by: Andrea Adami <andrea.adami@gmail.com> * * Finally, two refinements as discussed on openembedded-core * mailing list: * - replace "if image != '' and image is not None:" with "if image" * - add cpio.xz support Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* image_types.bbclass: add support for tar.xz, cpio.xz, cpio.lzmaAndrea Adami2011-07-121-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Once we add support for building kernel containing initramfs images * we expect compressed cpio archives. * Thus, add support for lzma and xz compressors for the initramfs images. * While there, add support for tar.xz as done in org.openembedded.dev. * * Patch was imported from the OpenEmbedded git server * (git://git.openembedded.org/openembedded) * * 'bitbake.conf: add cpio and ext4 .xz support' * commit 7977d3325a09e2edf4a8a1b02f48085f88f7a631 * Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> * * 'bitbake.conf: Define tar.xz image types.' * 1fca8dc50a821f4589fa5e339e6e279dd3c0dafe * Signed-off-by: Tom Rini <tom_rini@mentor.com> * * 'bitbake.conf: add XZ_INTEGRITY_CHECK and LZMA_COMPRESSION_LEVEL variables' * commit 312b42bcf2cc9b11266ba497ade68e8ddabb3007 * Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> * * 'bitbake.conf: unbreak and improve lzma image compression handling and adapt * linux-kexecboot.inc' * commit c382a9ce64bf4291572665652138aa01b2e54306 * Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> * Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add support for BAD_RECOMMENDATIONS to rootfs_ipkChris Elston2011-07-121-0/+20
| | | | | | | | | | | | | As discussed on IRC on 30/06/11, this patch adds support for BAD_RECOMMENDATIONS to rootfs_ipk, which is a list of packages NOT to install if suggested or recommended by a recipe. Taken from http://thread.gmane.org/gmane.comp.handhelds.openembedded/30417. Note that current support for this in oe.dev may also be broken, depending on the version of opkg in use. Signed-off-by: Chris Elston <celston@katalix.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* rpm: fix for non /usr/lib libdir caseYu Ke2011-07-121-1/+2
| | | | | | | | | | rpm default will use /usr/lib if the --with-path-lib is not specified. this will not work in non /usr/lib libdir case. so this patch add the --with-path-lib to fix this issue. Signed-off-by: Yu Ke <ke.yu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libcap: fix for non /usr/lib libdir caseYu Ke2011-07-122-3/+4
| | | | | | | | | | the recipe has hardcoded "lib=lib", which does not work in libdir=/usr/lib64 case where should be "lib=lib64", So this patch fix it by replacing lib with libdir Signed-off-by: Yu Ke <ke.yu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* perl: fix for non /usr/lib libdir caseYu Ke2011-07-121-1/+2
| | | | | | | | | | the config.sh is hardcoded to be /usr/lib, which does not work in non /usr/lib libdir case. This patch replace the hard code /usr/lib with ${libdir} to fix this issue Signed-off-by: Yu Ke <ke.yu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python-native: fix for non /usr/lib libdir caseYu Ke2011-07-122-5/+12
| | | | | | | | | | | | the get_python_lib() use hard code "lib". when other recipe building use python-native, the STAGING_LIBDIR is non /usr/lib, so the hard code "lib" will break the build This patch replace the hardcoded "lib" with value from libdir to fix this issue. Signed-off-by: Yu Ke <ke.yu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python: fix for libdir=/usr/lib64 caseYu Ke2011-07-122-1/+252
| | | | | | | | | | python has several place hard code "lib" which breaks build when libdir=/usr/lib64. SUSE has a patch to fix this issue. So this patch add the SUSE patch to address this issue Signed-off-by: Yu Ke <ke.yu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* openssl: fix for non /usr/lib libdir caseYu Ke2011-07-122-2/+2
| | | | | | | | | | | if libdir is not /usr/lib, e.g /usr/lib64, openssl build will fail because it still use /usr/lib as library dir. this patch appends the configure option "--libdir" to specify the correct library directory Signed-off-by: Yu Ke <ke.yu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* native.bbclass: generate libdir from libdir_nativeYu Ke2011-07-121-0/+2
| | | | | | | | | | | | | currently, the libdir in native.bbclass is inherited from target libdir defined in bitbake.conf. This is not correct in concept, instead, it should be inherited from libdir_native. Current code works because both the target libdir and libdir_native are the same value "/usr/lib". But if libdir changes (e.g. to /usr/lib64), then build will break. This patch make libdir generated from libdir_native to fix this issue. Signed-off-by: Yu Ke <ke.yu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gcc: Fix packaging correctlySaul Wold2011-07-122-4/+7
| | | | | | | | | | [YOCTO #1233] This fix directly packages the contents in and adds the lib*.so correctly to the -dev package. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* webkit-gtk: update SRCREVKoen Kooi2011-07-127-220/+454
| | | | | | | | | | | | | | | | | | | The layout of the repository has changed, so we need to account for that: * fixed license checksums * fixed SRC_URI * fixed SRCREV_FORMAT PCRE is gone, so no need for the dftables hack anymore But most importantly, this fixes the crash issues when using javascript (e.g. github.com) Tested on: * usrp-e1xx/angstrom-2011.07 Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* pulseaudio 0.9.15: delete, but keep 0.9.22 and 0.9.23Koen Kooi2011-07-128-1015/+0
| | | | | Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* pulseaudio: try harder to disable HALKoen Kooi2011-07-124-5/+4
| | | | | | | This disables linking against (lib)hal but enables the udev-hal compat layer so the hal-detect plugin keeps working. The hal-detect plugin is removed from the default dependencies to discourage its usage, but can be installed manually if needed. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cmake: update to 2.8.5 releaseOtavio Salvador2011-07-122-16/+6
| | | | | | Acked-by: Tom Rini <tom_rini@mentor.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libarchive: remove undistributable copyright content from sourceOtavio Salvador2011-07-121-3/+5
| | | | | | | | | | | The original tarball has two undistributable files that we have removed from the repacked tarball. The issue has been reported upstream at: http://code.google.com/p/libarchive/issues/detail?id=162 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sstate: Improve performance by moving files rather than using copy and deleteRichard Purdie2011-07-121-5/+11
| | | | | Acked-by: Joshua Lock <josh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* update-rc.d: Switch from a tag to a sepcific revisionRichard Purdie2011-07-121-1/+4
| | | | | | | | | | | | Unfortunately the git fetcher cannot resolve a named tag into a revision without network access. Since its desireable for OE-Core to function in a networkless environment, we need to specify the revision in the recipe which corresponds to the 0.7 tag. [YOCTO #1140] Acked-by: Joshua Lock <josh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-26 08:52:12 +0000