summaryrefslogtreecommitdiff
path: root/meta
Commit message (Collapse)AuthorAgeFilesLines
...
* classes/sanity: trim trailing newline when reading /etc/redhat-releasePaul Eggleton2012-04-181-1/+1
| | | | | | | | Any trailing whitespace needs to be stripped before comparing it to the SANITY_TESTED_DISTROS list. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libproxy: remove dependency on gconf when x11 not in DISTRO_FEATURESPaul Eggleton2012-04-181-2/+2
| | | | | | | | | | | | This allows libzypp to successfully build when x11 is not in DISTRO_FEATURES (avoiding the libzypp -> libproxy -> gconf -> gtk+ dependency chain which without X results in gtk+ failing at do_configure). Fixes [YOCTO #2320]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemugl: make postinst run at first bootScott Garman2012-04-181-5/+11
| | | | | | | | | | | | The previous postinst script was not working for images which use RPM because do_rootfs could allow qemugl to be installed after libgl1, and the postinst needs to run after libgl1 is installed. Hence, it's being changed to run at first boot instead of during do_rootfs. Signed-off-by: Scott Garman <scott.a.garman@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* self-hosted-image: remove BB_NO_NETWORK and update Poky SRCREVSaul Wold2012-04-171-3/+2
| | | | | | | | | | | | | | Remove BB_NO_NETWORK because we can not guarentee that all downloads will be available in the self-hosted image for the possible targets being built. If this image is run with out networking, failures may be seen and BB_NO_NETWORK should be set via the Hob Update the Poky SRCREV so it has the latest set of fixes and patches. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* task-self-hosted: Add LSB for distro infoSaul Wold2012-04-171-0/+1
| | | | | | | | | | | The lsb package is needed to enable the distro checking in the self hosted image. Currently there is no standard identification in the self-hosted image so use the existing lsb package which provides lsb_release that parses the /etc/release file Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lsb: Add DISTRO Info to /etc/lsb-release file also add util-linux to DEPENDSSaul Wold2012-04-171-0/+5
| | | | | | | | | | | Add the DISTRO* fields to the /etc/lsb-release file so the distro parsing code can find standard information about the Poky Distro when using the Self-Hosted Image. The lsb_release command uses getopt which is provided by util-linux Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto/meta: remove kernel config audit warningsBruce Ashfield2012-04-175-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Updating the meta SRCREVs to pickup the following meta change for the 3.0 and 3.2 kernels: [ meta: Clean up BSPs kernel config Clean up some QEMU and non-x86 BSPs kernel config, including qemuarm qemuppc qemux86 beagleboard mpc8315e_rdb Only obsolete/invalid kernel configs are removed. Signed-off-by: Yang Shi <yang.shi@windriver.com> ] With this commit, the configuration audit for the qemu and hardware reference boards is (largely) warning free. Signed-off-by: Yang Shi <yang.shi@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto/meta: beagleboard: disable CONFIG_PREEMPTBruce Ashfield2012-04-175-5/+5
| | | | | | | | | | | | | | | | | | | | | | Updating the meta SRCREV for both the 3.0 and 3.2 kernel trees to pickup the beagleboard xM boot fix: [ meta/beagleboard: disable CONFIG_PREEMPT The boot hangs with the message: mmc0: error -110 whilst initialising SD card The MMC driver has issues initializing when PREEMPT is enabled (either forced or voluntary). Unplugging and then plugging the card back will reset the driver and continue booting. Alternatively, disable preemption. ] [YOCTO: #1892] Signed-off-by: Denys Dmytriyenko <denys@ti.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto: .diff is a valid patch extensionBruce Ashfield2012-04-172-2/+2
| | | | | | | | | | | | | | | In fixing an existing patch migration bug, the list of valid extensions got out of sync from the core patch class. As a result, valid patches were not being applied to the tree. Updating the tools to migrate .diff files fixes the issue. Also in this fix is the removal of .patch in the find_sccs() routine, since it will never be returned by patch.bbclass when all non-patches are requested, it is simply confusing. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* matchbox-wm-2: Fix incorrect update-alternativesMark Hatle2012-04-171-2/+2
| | | | | | | | Update-alternatives was pointing to matchbox-session, and should have been pointing to matchbox-window-manager. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* lrzsz: sz, sx and sb were linked incorrectlyMark Hatle2012-04-171-3/+9
| | | | | | | | The sz, sx and sb links were created incorrectly to lrz, they should point to lsz. Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libproxy: Allow to build in non-gplv3 configurationRichard Purdie2012-04-171-0/+6
| | | | Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gst-plugins-bad: Add missing PR bump after curl changeRichard Purdie2012-04-172-2/+4
| | | | Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemu: Disable curl explicitly, its not in DEPENDSRichard Purdie2012-04-171-1/+1
| | | | | | | | | | | | | | | | | | | | There is an error when build meta-toolchain-sdk on Ubuntu 10.10: | Installing NATIVESDK packages | Processing task-sdk-host-nativesdk... | Processing task-cross-canadian-mips... | error: Failed dependencies: | libcurl.so.4 is needed by qemu-nativesdk-0.15.1-r5.i686 NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed ERROR: Task 21 (/buildarea2/lyang1/poky/meta/recipes-core/meta/meta-toolchain-gmae.bb, do_populate_sdk) failed with exit code '1' This is because qemu would depend on curl if it happened to be available at build time and could confuse the -native and -nativesdk librbaries. [YOCTO #2305] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sanity.bbclass: If the sanity tests fail, don't mark them as completeRichard Purdie2012-04-171-1/+1
| | | | | | | | | If the sanity tests fail, we still were writing out the stamp which means they'd get skipped the next time we run bitbake. This is clearly wrong and we should only write out the stamp file if the sanity tests complete successfully. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* perl: fix re-execution of compile taskVenkata ramana gollamudi2012-04-171-2/+3
| | | | | | | | | | | | After building perl package, re-execution of compile task recursively substitutes the path, making it an invalid path. Fixed to prevent recursive substitution. Similar case as [Yocto #2194] Signed-off-by: Venkata Ramana Gollamudi <ramana.gollamudi@huawei.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* avahi-daemon: fix missing init script linksAndreas Oberritter2012-04-171-5/+4
| | | | | | | | | * update-rc.d wasn't executed when the rootfs was built, because pkg_postinst_avahi-daemon exited early. It wasn't run either on first boot, because the exit code was 0. Signed-off-by: Andreas Oberritter <obi@opendreambox.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake.conf: Add PARALLEL_MAKE to BB_HASHBASE_WHITELISTRichard Purdie2012-04-161-1/+1
| | | | | | | | | The value of PARALLEL_MAKE shouldn't affect sstate checksums. In general it doesn't as the value is injected as a task override and the sstate checksum doesn't track these. That isn't the case for linux-yocto in particular so adding it the list of variables to ignore is useful. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libzypp: add libproxy to DEPENDSSaul Wold2012-04-161-2/+2
| | | | | | | | | libzypp uses proxy.h to handle proxies [YOCTO #2306] Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* distrodata.bbclass: fix comment typoOtavio Salvador2012-04-161-1/+1
| | | | | | | | | | Fixes: - xf86-intput-synaptics-12.6.9.tar.gz + xf86-input-synaptics-12.6.9.tar.gz Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* flex: backport Debian patches to fix generated code warningsOtavio Salvador2012-04-163-1/+105
| | | | | | | | | The generated parser had warnings regarding signess and return check which makes Linux Kernel's perf tool from 3.4 release to fail without those patches. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* connman-gnome: fix segfault on connectPaul Eggleton2012-04-162-2/+33
| | | | | | | | Fixes a segfault in the properties application when connecting to a WiFi service succeeds. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* automake-nativesdk: fix builds on fedora 17Robert Yang2012-04-161-3/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generally distros keep perl at /usr/bin/perl Fedora 17 also has /bin/perl this causes automake-nativesdk build on such distros to put perl interpreter path in the perl scripts as /bin/perl But we set perl location for target as /usr/bin/perl This mismatch of perl path causes failure of rootfs image creation like this: | error: Failed dependencies: | /bin/perl is needed by automake-nativesdk-1.11.2-r2.x86_64 NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed The second sed command is for such a case: eval 'case $# in 0) exec /bin/perl -S "$0";; *) exec /bin/perl -S "$0" "$@";; esac' This line has two "/bin/perl" and we can't use a line number to tell sed which line it is since the line numbers in different files are defferent. [YOCTO #2304] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
* autoconf-nativesdk: fix builds on fedora 17Robert Yang2012-04-162-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Generally distros keep perl at /usr/bin/perl Fedora 17 also has /bin/perl this causes autoconf-nativesdk build on such distros to put perl interpreter path in the perl scripts as /bin/perl But we set perl location for target as /usr/bin/perl This mismatch of perl path causes failure of rootfs image creation like this: | error: Failed dependencies: | /bin/perl is needed by autoconf-nativesdk-2.68-r6.x86_64.rpm NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed The second sed command is for such a case: eval 'case $# in 0) exec /bin/perl -S "$0";; *) exec /bin/perl -S "$0" "$@";; esac' This line has two "/bin/perl" and we can't use a line number to tell sed which line it is since the line numbers in different files are defferent. [YOCTO #2304] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
* glib-2.0: fix builds on fedora 17Robert Yang2012-04-161-1/+11
| | | | | | | | | | | | | | | | | | | | | Generally distros keep perl at /usr/bin/perl Fedora 17 also has /bin/perl this causes glib-2.0 build on such distros to put perl interpreter path in the perl scripts as /bin/perl But we set perl location for target as /usr/bin/perl This mismatch of perl path causes failure of rootfs image creation like this: | error: Failed dependencies: | /bin/perl is needed by libglib-2.0-utils-2.30.3-r0.ppc603e NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed [YOCTO #2304] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
* perl: fix re-execution of patch/configurePaul Eggleton2012-04-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | The perl recipe's do_configure() does some manual sed replacements over the entire WORKDIR. Fix the following issues with this: * Skip patches, which fixes re-execution of do_patch after do_configure has run once * Ensure that the replacement operation does nothing if do_configure is re-executed * Avoid unnecessarily modifying /usr/include paths within documentation that will end up being packaged * Fix a quoting issue in the expression used in the grep command that ended up causing files that did not contain .*\.h after /usr/include to be matched and modified. The files modified during do_configure have been compared before and after this patch to ensure there are no unexpected changes. Some /usr/include paths that are not within documentation are no longer being substituted however these are all within comments or scripts for other Unix operating systems that are not applicable. [YOCTO #2194] Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* core-image-sato-sdk: typo in DESCRIPTIONBeth Flanagan2012-04-161-1/+1
| | | | | | | Fix for a minor type in DESCRIPTION Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* core-image-rt-*.bb: require munges DESCRIPTIONBeth Flanagan2012-04-162-4/+2
| | | | | | | | | | The require of core-image-minimal overrides the description. The best fix for this would be conditional setting of DESCRIPTION in the required images for all image descriptions, but that opens a potential can of worms. Moving the require fixes this. Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* autogen-native: Fix sstate relocation issue when reusing libguileRichard Purdie2012-04-161-1/+12
| | | | | | | This was found to cause issues on the Yocto autobuilders and fixes do_compile failures when guile-native has been relocated. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake.conf: Include abi_version.conf in a early stageDongxiao Xu2012-04-161-1/+1
| | | | | | | | We may define new OELAYOUT_ABI variable in ${DISTRO}.conf, therefore we need to move the abi_version.conf before that. Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Multilib: Fix RDEPENDS in libc-package.bbclass, useradd.bbclass...Zhai Edwin2012-04-163-3/+4
| | | | | | | MLPREFIX is needed in RDEPENDS for multilib build Signed-off-by: Zhai Edwin <edwin.zhai@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* opkg-config-base/poky-feed-config-opkg: Always use ↵Richard Purdie2012-04-162-8/+4
| | | | | | | | | | | ALL_MULTILIB_PACKAGE_ARCHS to build arch list We need consistent configuration files for opkg so we might as well always use the full list. This is equal to PACKAGE_ARCHS in the non-multilib case. This fixes various multilib failures with ipk multilibs. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* dropbear: Allow tasks to be safely re-executedRichard Purdie2012-04-161-10/+1
| | | | | | | | | | Re-running the debug_patch task would cause the build to fail. This patch moves the extra patch handling directly into SRC_URI and removes the need for the separate task, allowing safe re-execution of each task. [YOCTO #2194] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* docbook-utils-native: Fix re-execution of the unpack taskRichard Purdie2012-04-161-2/+3
| | | | | | | | | | | If the do_unpack task is re-executed, the sed_done stamp was not removed, the sed commands wouldn't re-run and the build would fail in do_compile. This patch ensures the stamp is in ${S} and that we clean that directory when unpack runs so it is a build from sctatch at that point. [YOCTO #2194] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sgml-common: Fix re-execution of the compile taskRichard Purdie2012-04-161-1/+1
| | | | | | | | | The sed command run during do_compile isn't idempotent. This change fixes it so that it is and the compile task can be re-executed. [YOCTO #2194] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* wget: Fix re-execution issueRichard Purdie2012-04-162-14/+1
| | | | | | | | | | | | The patch in this recipe patches both configure and configure.in which leads to build failures once configure has executed and regenerated configure. The fix to make patch re-executable is not to patch configure and only patch configure.in. [YOCTO #2194] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python: Fix re-execution problem due to patching configure and configure.inRichard Purdie2012-04-163-13/+2
| | | | | | | | | | | There was a patch patching both configure and configure.in. Since the recipes all autoreconf, this is pointless and means subsequent patch tasks fail. The fix is to only patch configure.in. [YOCTO #2194] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gcc-configure-common.inc: Stop gcc looking at build system pathsRichard Purdie2012-04-151-0/+4
| | | | | | | | | | | | | | | | | There were puzzling failures when you make a force recompile of any gcc component. The error was in do_configure with cross-compilation badness being detected in config.log files. gcc is different in that many of the config.log files are generated during the do_compile phase. This means this host contamination issue has always been present but only shows up on a rebuild. The fix is to force the appropriate configuration variable to "none required" then gcc won't look in the bad locations. [YOCTO #2279] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gst-plugins-bad: add curl as build dependencyDongxiao Xu2012-04-151-1/+1
| | | | | | | | gst-plugins-bad needs curl.h to finish its build, so add curl as its dependency. Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* net-tools: Fix do_patch to be re-executableRichard Purdie2012-04-151-2/+10
| | | | | | | | | | | | This recipe's do_patch was not able to be re-executed due to its custom patching functions. This fixes things so that it can be re-executed. It also fixes the unpack task re-execution by ensuring ${S} is clean before the unpack starts. [YOCTO #2194] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* man-pages: Fix to allow re-execution of tasksRichard Purdie2012-04-151-8/+4
| | | | | | | | | | | | The all target in the makefile triggers "screen" and "remove" targets, neither of which do anything useful/sane for our usecases. The simplest way to get the makefile to behave is to only use the install target. Clean up the recipe a bit whilst making these changes and simplify things. [YOCTO #2194] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* pseudo: Ensure the correct libraries are used at runtimeRichard Purdie2012-04-153-5/+4
| | | | | | | | | | | | | | | | | There can be a conflict between the nativesdk libc and the host system's libc. It is assumed the nativesdk version is of an equal or higher version. This is a particular issue for pseudo if its loading a system binary since the system's libc might be used of an older verison which would then confuse libpseudo.so when loaded as a preload. To avoid this, set LD_LIBRARY_PATH so the nativesdk libc is always used. Since we now use --without-rpath, we can remove the MAKEOPTS RPATH workaround. [YOCTO #2299] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* unfs-server: Fix do_configure so it can be re-executed safelyRichard Purdie2012-04-151-1/+3
| | | | | | [YOCTO #2194] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* guile: Fix binary relocation issue for precompiled guile objectsRichard Purdie2012-04-151-3/+5
| | | | | | | | | | | | | When guile-native was relocated, there were messages like: ;;; note: source file /srv/home/pokybuild/yocto-autobuilder/yocto-slave/emenlow/build/build/tmp/sysroots/x86_64-linux/usr/share/guile/2.0/ice-9/eval.scm ;;; newer than compiled /srv/home/pokybuild/yocto-autobuilder/yocto-slave/fri2/build/build/tmp/sysroots/x86_64-linux/usr/lib/guile/2.0/ccache/ice-9/eval.go and this confuses things like the autogen-native "guile --version" check. This patch ensures the wrapper script sets the necessary variables correctly. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* connman-gnome: connman 0.79 API fixesPaul Eggleton2012-04-159-553/+2221
| | | | | | | | | | | | Fix connman-gnome to work with connman 0.79, which made a number of fairly serious DBus API changes. Also switch over to the newly repopulated git repo on kernel.org in which the two previous patches have been merged. Fixes [YOCTO #2202]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* grub: Add missing dependency on autogen-native to avoid build failuresRichard Purdie2012-04-141-0/+1
| | | | Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* distro_tracking: add entries for several new recipesScott Garman2012-04-141-7/+77
| | | | | | | | | | | | | | | | | | | | | | | Added distro tracking fileds for the following recipes: qt-mobility-x11 gst-plugin-bluetooth alsa-state ocf-linux avahi-ui libjson systemtap-uprobes xf86-video-fbdev u-boot-fw-utils qt4-graphics-system qt-mobility-embedded lttng-tools shadow-securetty Also fixed a few minor typos in others (spelling of bluetooth and months) Signed-off-by: Scott Garman <scott.a.garman@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* distro_tracking: add some additional DISTRO_ALIASESSaul Wold2012-04-141-0/+18
| | | | | | | | | | | | | | | | | | | | ltp rgb libksba stat directfb-example libfakekey builder core-gtk-directfb task-core-tools-* task-self-hosted sato-screenshot libxxf86misc qmmp portmap Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* mulitlib.bbclass: Ensure correct value of ALL_MULTILIB_PACKAGE_ARCHS is ↵Richard Purdie2012-04-141-0/+3
| | | | | | | | | | | | | | | preserved The value of ALL_MULTILIB_PACKAGE_ARCHS needs to be consistent both in multilib extended recipes and in normal context. If this isn't the case it can lead to inconsistent configuration files at a minimum. This patch ensures the value is preserved during the class extension code since computing it after that point is hard. [YOCTO #2290] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* update-alternatives: Fix for compatibility with multilib recipesRichard Purdie2012-04-141-2/+3
| | | | | | | | | | The PN == BPN test was designed to exclude native/nativesdk but also unfortunately excludes multilib unintentionally. This change fixes this and allows multilib images with alternatives to funciton correctly. [YOCTO #2214] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-16 06:05:41 +0000