summaryrefslogtreecommitdiff
path: root/scripts
Commit message (Collapse)AuthorAgeFilesLines
* sstate-cache-management.sh: fixes and enhancementRobert Yang2012-03-301-49/+240
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a few problems and enhance its functions, it shoud be more useful than before. * Search in meta and meta-* for archs, and grep AVAILTUNES for archs, (only search meta, and grep DEFAULTTUNE before), add the host arch. and also can search in extra layers with --extra-layer. * Reduce the analyzing time when remove duplicated files. It would cost more than 10 minutes to analyze 11,000 files before, now only needs about 50 seconds. * Check the access time rather than create time. * Need the user's confirm before really remove the file, or use --yes to assume yes. * Add --stamps-dir to keep sstate files which are used by the build directory, and remove others this can make the sstate cache dir clean, it is faster and should be useful than the --remove-duplicated. * Add --verbose to explain what is being done. * Add "-d" which is short for --remove-duplicated [YOCTO #2198] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* runqemu: set console=ttyS0 when running with nographic optionScott Garman2012-03-291-0/+1
| | | | | | | | | | | When passing the nograhic option to the runqemu script, set console=ttyS0 in the kernel options so the user can view the kernel boot messages. This fixes [YOCTO #1475] Signed-off-by: Scott Garman <scott.a.garman@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/bitbake: Update to help rebuild pseudo-nativeMark Hatle2012-03-281-5/+31
| | | | | | | | | | | | Attempt to detect when pseudo-native has been updated. If it has been updated, or if the user is attempting an operation with pseudo-native in the name, force a build of pseudo-native, prior to running the main build. Note: This causes a build, then clean in the case of bitbake -c cleansstate pseudo-native Signed-off-by: Mark Hatle <mark.hatle@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python: fix packaging dependencies on minimal systemsGary Thomas2012-03-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If you install the top-level python package only on a minimal system which has no other python packages installed then python is not functional at all. Without any extra packages installed this error is seen: # python Traceback (most recent call last): File "/usr/lib/python2.7/site.py", line 64, in <module> import traceback ImportError: No module named traceback Installing python-lang only partly fixes the problem as this error still exists: # python Traceback (most recent call last): File "/usr/lib/python2.7/site.py", line 569, in <module> main() File "/usr/lib/python2.7/site.py", line 551, in main known_paths = addusersitepackages(known_paths) File "/usr/lib/python2.7/site.py", line 278, in addusersitepackages user_site = getusersitepackages() File "/usr/lib/python2.7/site.py", line 253, in getusersitepackages user_base = getuserbase() # this will also set USER_BASE File "/usr/lib/python2.7/site.py", line 243, in getuserbase USER_BASE = get_config_var('userbase') File "/usr/lib/python2.7/sysconfig.py", line 520, in get_config_var return get_config_vars().get(name) File "/usr/lib/python2.7/sysconfig.py", line 400, in get_config_vars import re ImportError: No module named re Signed-off-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Various typoes fixed, all comments or output strings.Robert P. J. Day2012-03-262-2/+2
| | | | | | | Typoes fixed: "enviroment", "editted", "spliting", "scheulder". Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* qemu: add fedora pkg names when build failedRobert Yang2012-03-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | When qemu build failed, we can see such messages: You need libGL.so and libGLU.so to exist in your library path and the development headers for SDL installed to build qemu-native. Ubuntu package names are: libgl1-mesa-dev, libglu1-mesa-dev and libsdl1.2-dev These pkgs have different names on Fedora distributions, and Fedora is one the main linux distributions, so add Fedora package names. The following Fedora versions have these pkgs: Fedora 9 64bit Fedora 13 32bit Fedora 13 64bit Fedora 16 64bit [YOCTO #2174] Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/combo-layer: handle diffs in commit messagesPaul Eggleton2012-03-231-0/+38
| | | | | | | | | | | A few recent commits in the OE-Core repository contain diffs in their commit messages, which totally confuses git-am when applying them to the combo repository during update. Add some code to detect and indent any diff text in the commit message so that this does not happen (and show a warning). Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/combo-layer: limit component repo dirty checkPaul Eggleton2012-03-231-9/+9
| | | | | | | | | If one or more components are specified for update, only check if their repository/repositories are dirty rather than checking all of the configured repositories. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ddimage: Add script for writing images to boot mediaDarren Hart2012-03-221-0/+87
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes [YOCTO #1806] Standard practice is to use the Linux "dd" command to write images to boot media. This can be error prone and the results of sloppy usage can be disastrous. Locating the device you want to use is a clumsy process, especially on a headless build system. The ddimage script does the following: o Check the image and device exist o Check the device is writable o Compare the device to a blacklist and abort if it's listed Blacklist defaults to "/dev/sda" o Display useful identifying information about the image and device o Prompt the user before commencing the write The output looks something like this: $ sudo ~/bin/ddimage tmp/deploy/images/core-image-sato-fri2-noemgd.hddimg /dev/sdk Image details ============= image: `tmp/deploy/images/core-image-sato-fri2-noemgd.hddimg' -> `core-image-sato-fri2-noemgd-20111202214038.hddimg' size: 318568448 bytes modified: 2011-12-02 13:45:05.298897861 -0800 type: x86 boot sector, code offset 0x58, OEM-ID "SYSLINUX", sectors/cluster 16, root entries 512, Media descriptor 0xf8, sectors/FAT 152, heads 64, hidden sectors 32, sectors 622204 (volumes > 32 MB) , serial number 0x4ed946e0, label: "boot ", FAT (16 bit) Device details ============== device: /dev/sdk vendor: Kingston model: DT 101 G2 Write tmp/deploy/images/core-image-sato-fri2-noemgd.hddimg to /dev/sdk [y/N]? y Writing image... 303+1 records in 303+1 records out 318568448 bytes (319 MB) copied, 53.6766 s, 5.9 MB/s Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Dexuan Cui <dexuan.cui@intel.com> CC: Joshua Lock <josh@linux.intel.com> CC: Kishore K Bodke <kishore.k.bodke@intel.com>
* buildhistory_analysis: use bb.utils.explode_dep_versionsPaul Eggleton2012-03-211-3/+18
| | | | | | | | | | Previously this had its own implementation of splitting a list of packages with optional version e.g. "libncurses-dev (>= 5.9)"; switch to using the already existing bitbake function which does this as it is much better tested. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/qemuimage-testlib: fix typosYi Zhao2012-03-211-2/+2
| | | | Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cleanup-workdir: add a script to clean up WORKDIRKang Kai2012-03-211-0/+150
| | | | | | | | | | [Yocto 1561] Add script cleanup-workdir to clean up WORKDIR. It checks every package build directories under WORKDIR then parse the directory name to get package name and version. If the version is not the package prefer version then delete the directory. Signed-off-by: Kang Kai <kai.kang@windriver.com>
* scripts/bitbake: ensure user is in build directoryPaul Eggleton2012-03-141-0/+5
| | | | | | | | | If the user is in any directory other than $BUILDDIR when the bitbake wrapper script is run, then show an error an exit. Fixes [YOCTO #2071]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* scripts/contrib/python/generate-manifest-2.7.py: Catch up with staticdev fixesRichard Purdie2012-03-141-2/+8
| | | | Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/oe-git-proxy-socks-command: Add fallback to use ncRichard Purdie2012-03-021-5/+11
| | | | | | | If our own proxy command isn't available for some reason and nc is available, fall back to use it. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/oe-git-proxy-socks-command: Improve error fallback/handlingRichard Purdie2012-03-021-0/+15
| | | | | | | | | | | If oe-git-proxy-socks isn't available, try and create it. If that fails, tell the user there is a problem, don't just fail to find the command. [YOCTO #2007] Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/prserv-tool: Adepted to new bitbake cache.Lianhao Lu2012-02-281-11/+17
| | | | | | | | Adepted to the new bitbake cache mechanism which is based on file content but not on file timp stamps any more. Signed-off-by: Lianhao Lu <lianhao.lu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/hob: Launch the new hobDongxiao Xu2012-02-241-29/+1
| | | | | | | Change the scripts to launch the new Hob. Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* A script to clean obsolete sstate cache filesRobert Yang2012-02-231-0/+135
| | | | | | | | | | | | | | | | | | | | | | | | | | There would be many obsolete cache files in the SSTATE_DIR after several builds, this script can remove the obsolete one for a pkg, only leave the up to date one. Here is the help text: sstate-cache-management.sh <OPTION> Options: --help, -h Display this help and exit. --cache-dir=<sstate cache dir> Specify sstate cache directory, will use the environment variable SSTATE_CACHE_DIR if it is not specified. --remove-duplicated Remove the duplicated sstate cache files of one package, only the newest one would be kept. [YOCTO #1682] Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
* scripts/combo-layer: allow updating a specific component(s) onlyPaul Eggleton2012-02-211-8/+23
| | | | | | | | | If you specify one or more components to update immediately following the "update" command, only these components will be updated as opposed to the default behaviour of updating all of them. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/combo-layer: add branch option to example configPaul Eggleton2012-02-211-4/+9
| | | | | | | | | | Minor improvements to the example combo-layer config file: * Add the recently added branch option to the optional options section * Mention in comments that last_revision gets updated during "update" * Tidy up some more grammar Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/combo-layer: avoid saving last revision if unchangedPaul Eggleton2012-02-211-1/+2
| | | | | | | | | | | | | | If we are running an update and the last revision hasn't changed since the last update, don't write to the configuration file. This avoids committing the config file with no changes other than spontaneous reordering of sections, which sometimes occurs due to the behaviour of the internal dictionary in Python's ConfigParser class. (This can be fixed properly but the fix is only easy in Python 2.7+ due to the availability there of the collections.OrderedDict class, and we currently want to be compatible with 2.6.x as well.) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/combo-layer: avoid error when config file is outside repoPaul Eggleton2012-02-211-3/+4
| | | | | | | | | Avoid displaying the error from the "git status" command we use to check the status of the config file if the config file is outside of the repository (a situation that is already handled). Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/bitbake: pass through debug options to initial pseudo buildPaul Eggleton2012-02-211-1/+13
| | | | | | | | | | If you specify -D or -v options to the bitbake wrapper script, and the initial pseudo build needs to be done, it's useful to pass these options through to that command so that you can debug the initial pseudo build as well. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* runqemu-internal: qemuarm can handle 256MKhem Raj2012-02-071-6/+7
| | | | | | | Raise the check for max RAM supported for QEMU/arm its 256M since we patched it to be so in OE Signed-off-by: Khem Raj <raj.khem@gmail.com>
* documentation-audit.sh: remove COMMERCIAL_LICENSE warningTom Zanussi2012-01-241-1/+2
| | | | | | | | COMMERCIAL_LICENSE no longer exists; the equivalent functionality is now has been replaced by LICENSE_FLAGS_WHITELIST, so replace the COMMERCIAL_LICENSE warning with a similarly equivalent warning. Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
* qemuimage-testlib: rename qemuppc imageSaul Wold2012-01-241-2/+2
| | | | | | | | A recent set of changes changed the kernel name from bzImage to vmlinux, this test needs to change also. Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-yocto/qemuppc: fix console and ethernetBruce Ashfield2012-01-241-1/+1
| | | | | | | | | | | | | | | Two issues are fixed with this commit, the ability to use the keyboard on a graphical qemu boot and enabling ethernet by default on a 3.0 kernel. The keyboard is fixed via the same method as the other simulations with the addition of console=tty on the qemu command line. Ethernet is fixed by adding a dependency of PCNET32 to the qemuppc configuration, which allows us to build ethernet directly into the image. Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* runqemu: Fix the wrong path of libGL.so in 64b Ubuntu 11.10Zhai Edwin2012-01-171-1/+10
| | | | | | | | From 11.10, libGL.so is installed @ /usr/lib/x86_64-linux-gnu/ in 64b Ubuntu. [YOCTO #1885] got fixed Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
* qemuppc: replace emulation of qemuppc from prep to mac99Liming Wang2012-01-172-14/+9
| | | | | | | | | With this new emulation, existing qemuppc functionality is maintained and other functionality such as framebuffer + sato and NFS boot are added. Signed-off-by: Liming Wang <liming.wang@windriver.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* meta/PRService: Added export/import fuctions.Lianhao Lu2012-01-111-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [YOCTO #1556] - Modified meta/class/package.bbclass and prserv.bbclass according to the change in PR service by adding PACKAGE_ARCH into the query tuple. - Added prexport.bbclass, primport.bbclass to export/import AUTOPR values from/to PRService. - Move PR service related common code to lib/oe/prservice.py. - Supported reading the AUTOPR values from the exported .inc file instead of reading it from remote PR service. - Created a new script bitbake-prserv-tool to export/import the AUTOPR values from/to the PR service. Typical usage scenario of the export/import is: 1. bitbake-prserv-tool export <file> to export the AUTOPR values from the current PR service into an exported .inc file. 2. Others may use that exported .inc file(to be included in the local.conf) to lockdown and reproduce the same AUTOPR when generating package feeds. 3. Others may "bitbake-prserv-tool import <file>" to import the AUTOPR values into their own PR service and the AUTOPR values will be incremented from there. Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
* buildhistory: add script to check for significant changesPaul Eggleton2012-01-061-0/+43
| | | | | | | | | | | | | | | | Adds a buildhistory-diff script which can be used to analyse changes in the buildhistory git repository (as produced by buildhistory.bbclass), and report significant ones that may need manual checking to ensure they aren't regressions (e.g. package size changed by more than a certain percentage, files added/removed/changed in the image, etc.) The implementation is actually split into a small script and a Python module, in order to make the logic re-usable in a future web-based interface. Implements the first part of [YOCTO #1566]. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* rpm2cpio.sh: make compression tests case-insensitiveTom Zanussi2012-01-031-4/+4
| | | | | | | | | | | | | | | | | | | In the rpm2cpio.sh script, the output of $COMPRESSION is tested for certain lowercase strings such as 'xz' in order to determine the decompression to use. The problem is that the output strings tested are from the output of 'file', which uses different cases in different versions e.g. file-5.09 prints: tmp/sysroots/x86_64-linux/usr/bin$ ./file xxx.tar.xz: XZ compressed data while file-5.03 prints: tmp/sysroots/x86_64-linux/usr/bin$ ./file xxx.tar.xz: xz compressed data In the former, the XZ string causes xz compressed payloads to incorrectly fall through to the catch-all lzma case. Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
* scripts/bitbake: add a version >= 2.6 checkPaul Eggleton2011-12-151-0/+9
| | | | | | | | | Unfortunately we now have code in BitBake which is parsed before the current version check and is incompatible with Python < 2.6. Rather than fixing this and being eternally vigilant for >= 2.6 feature usage, just add a version check to the wrapper script. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* scripts/runqemu: show an error if /dev/net/tun is unusablePaul Eggleton2011-12-151-0/+8
| | | | | | | | | | If /dev/net/tun is either not present or is not writable by the user, then show an appropriate error message. (QEMU needs access to this device in order to enable networking; it may be missing if it is not enabled or loaded into the kernel, and some distributions such as CentOS 5.x set restrictive permissions upon it.) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* scripts/send-pull-request: fix typoOtavio Salvador2011-12-121-1/+1
| | | | | | s/No cover letter will be send./No cover letter will be sent./ Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* scripts/runqemu-ifup: Ensure netmask is set correctlyRichard Purdie2011-12-121-1/+1
| | | | | | | | Without this the command will add a route for the subnet 192.168.7.0 which means multiple qemu instances can't operate correctly since all but the last one will be masked out. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/send-pull-request: allow sending of patches without a cover letterOtavio Salvador2011-12-091-9/+12
| | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* runqemu: look for *-image* to be more flexible for image namesSaul Wold2011-11-291-2/+2
| | | | | | We can't just look for *image* since it will catch up bzimage Signed-off-by: Saul Wold <sgw@linux.intel.com>
* sanitytest: use different option for command ps from busybox and procpsJiajun Xu2011-11-181-4/+24
| | | | | | | | | | | Current sanitytest use option -e for ps command, which only works for ps from procps. It fails if ps is provided by busybox. Add check to use different option for command from busybox and procps. [YOCTO #1756] Signed-off-by: Jiajun Xu <jiajun.xu@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Convert to use direct access to the data store (instead of bb.data.*Var*())Richard Purdie2011-11-101-14/+14
| | | | | | | | | | | | | | | This is the result of running the following over the metadata: sed \ -e 's:bb.data.\(setVar([^,()]*,[^,()]*\), *\([^ )]*\) *):\2.\1):g' \ -e 's:bb.data.\(setVarFlag([^,()]*,[^,()]*,[^,()]*\), *\([^) ]*\) *):\2.\1):g' \ -e 's:bb.data.\(getVar([^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \ -e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^(), ]*\) *,\([^)]*\)):\2.\1,\3):g' \ -e 's:bb.data.\(getVarFlag([^,()]*,[^,()]*\), *\([^() ]*\) *):\2.\1):g' \ -e 's:bb.data.\(getVar([^,()]*\), *\([^) ]*\) *):\2.\1):g' \ -i `grep -ril bb.data *` Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* scripts/qemuimage-testlib: Output a slightly better error if expect is missingRichard Purdie2011-11-101-0/+14
| | | | Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* python: improve packagingMartin Jansa2011-11-071-17/+30
| | | | | | | | | | | | | | | * move 2to3 to separate package and include lib2to3 (was in python-misc) * fix pattern for python-unittest (was in python-misc because it's in subdirectory now) * add pydoc_data to python-pydoc (was in python-misc) * add more stuff to smtpd, audio, codecs, ctypes, html, io, json, mime, pickle, stringold, xmlrpc * move all FILES_ details from python recipe to manifest generator so it's in one place * added manual line break in FILES_${PN}-core, because git send-email doesn't like too long lines $ git send-email -1 dfaae65839f0ab23e5b2ae2a68df0f370bca84d2 fatal: /tmp/k8zbDajUNP/0001-python-improve-packaging.patch: 64: patch contains a line longer than 998 characters Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* scripts/combo-layer: skip empty commitsPaul Eggleton2011-11-071-12/+15
| | | | | | | | | If a commit is empty (for example, commits brought over from svn where only properties were changed) then attempting to apply it with "git am" will result in the error "Patch format detection failed", so skip it instead. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* scripts/combo-layer: improve some messagesPaul Eggleton2011-11-071-8/+8
| | | | | | Fix some grammar. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* scripts/combo-layer: auto-commit updated config filePaul Eggleton2011-11-071-0/+12
| | | | | | | | | | | | | If the config file is tracked within the combo-layer repository and it is updated at the end of the "update" operation (because last_revision has been changed), then automatically commit the file. This ensures that multiple people can perform updates on different machines without the last revision information going missing. (If the file is outside the repository or is masked via .gitignore, this will do nothing.) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* scripts/combo-layer: fix dirty repo checkPaul Eggleton2011-11-071-6/+2
| | | | | | | Fix the dirty repository check to detect any changes, including untracked files and uncommitted changes in the index. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* scripts/combo-layer: make component repo branch configurablePaul Eggleton2011-11-071-8/+14
| | | | | | | Add an optional per-component branch setting to allow specifying the branch instead of always using master. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* scripts/combo-layer: tidy up config examplePaul Eggleton2011-11-072-51/+19
| | | | | | | Move all example configuration to the example config file, tidy up a few long lines and fix some grammar. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* scripts/combo-layer: make init set up initial component dataPaul Eggleton2011-11-072-4/+23
| | | | | | | | | | The "init" subcommand will now copy the current state of each component repository into the combo layer repository, set last_revision for each component, and then use "git add" to set up the initial commit (but will not actually make the initial commit - that is left up to the user). Also take the opportunity to bump the version number. Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>