| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
| |
psuedo needs a full path to its pid file, so convert
relative extract-dir paths to full ones.
The symptom of this bug is receiving the following error:
pseudo: Couldn't open relative/path/to/var/pseudo/pseudo.pid: No such file or directory
This fixes [BUGID #670]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
image for each case
To reduce the time on sanity testing, we remove variable SHARE_IMAGE and use
a new variable TEST_SERIALIZE in local.conf. It is by default set to 1. Poky
will copy and boot the to-be tested image for only once. It will not remove
or kill the image and test cases will be serialized executed against the same
image. If it is set to 0, image is always be copied for each cases, which takes
much time. I had a experiment that latest qemuppc sato only takes 7 minutes to
finish 9 sanity test cases, which takes more than 20 minutes before.
I also removed sanity case "boot" from sato/sdk/lsb because the other cases for
these targets already cover the check point of "boot".
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
on autobuilder
Fixes [BUGID #595]
Because of the QEMU booting slowness issue(see bug #646 and #618), autobuilder
may suffer a timeout issue when running sanity test. We introduce variable
SHARE_IMAGE here to fix the issue. It is by default set to 1. Poky will copy
latest built-out image and keep using it in sanity testing. If it is set to 0,
latest built-out image will be copied and tested for each case, which will take
much time.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
bbvars.py will compare recipes in meta directories with documentation files
and report on variables that don't appear to be documented. It reports the
number of times a variable is used as well as any doctags present in the
documentation config file.
The output of this is intended to aid in determining where documentation may
be lacking, but it is not perfect, and does generate some false positives. An
experienced eye and careful attention to count and doctag should be applied to
the results.
$ ./bbvars.py -d ../../documentation/poky-ref-manual/poky-ref-manual.html -m ../../meta -t ../../meta/conf/documentation.conf -T | head -n 10
Found 1413 undocumented bb variables (out of 1578):
VARIABLE COUNT DOCTAG
===================================================
BUILD_ARCH 4 The name of the building architecture. E.g. i686.
BUILD_CC_ARCH 2 FIXME
BUILD_PREFIX 4 FIXME
BUILD_SYS 13 FIXME
BUILD_VENDOR 2 FIXME
CACHE 1 The directory holding the cache of the metadata.
COMPATIBLE_HOST 19 A regular expression which matches the HOST_SYS names supported by the package/file. Failure to match will cause the file to be skipped by the parser.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
|
|
|
|
|
|
|
|
| |
Test_Create_Qemu
There is no connman in LSB image. So we need to remove connman test from it.
And when we check if ip address fetched by Test_Fetch_Target_IP is valid,
we should use "==" operator for string comparison.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
|
|
|
|
|
|
|
| |
Fixed [BUGID# 625]. Skip building pseudo if necessary by parsing the
options to bitbake.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
|
|
|
|
|
|
|
|
| |
Add one case for connman sanity test. We check if connmand is running
in background after booting and if there is always one connmand process
running even connmand is executed by several times.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
|
|
|
|
|
|
| |
Add one case for compile tools sanity test in target, including gcc/g++/make.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
|
|
|
|
|
|
| |
Add one case for rpm query sanity test.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
|
|
|
|
|
|
| |
Add two cases for zypper sanity test.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
|
|
|
|
| |
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Previously, any active command containing the word "qemu" including
in the command path would trigger a "success" result for detecting
the qemu process. This change fixes the check to search for commands
starting with "qemu" and ignores pathnames.
It also shortens the timeout for the qemu process to appear to 10
seconds. If it doesn't appear in that time there is always a problem.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
| |
The recent environment changes mean TOPDIR/BUILDDIR need to be exported
specifcially to the enviromnent so the qemu scripts can find the correct
build directory.
Without this, qemu can fail to run.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
address
Fixes [BUGID #612, #611]
Add check for existence of image to be tested in qemuimage-testlib.
This ensures that sanity test returns failure immediatly when there is
no image found. And also add check for the correctness of ip address.
If the ip address returned by function Test_Fetch_Target_IP is 0, it
means qemu starts up failed and no valid ip address found.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
|
|
|
|
|
|
|
|
| |
Check the missing modules and permission with informative output.
[BUGID #599] got fixed.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some users find it easier to use their git sendmail setup over a local
MTA to deliver mail with the send-pull-request script. If you would
like to do this, please read the git-send-email man page and set
the relevant entries in your git config. In particular, be sure to
set sendemail.from to avoid being asked each time.
Reported-by: Khem Raj <raj.khem@gmail.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some users experience problems viewing the pull requests as a sequential
mail series due to the script using the git commit date for the patches
and today's date for the cover letter.
Address this by renaming the email Date: header to Old-Date: and adding
a new Date: header with a current timestamp.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Reported-by: Gary Thomas <gary@mlbassoc.com>
Cc: Josh Lock <josh@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update the script so that it will work in more then just bash. If bash
is not used, it will assume the PWD is the Poky location. (This is because
BASH_SOURCE is a bash-ism, and equivalent functionality is not available in
other shells).
This has been verified with dash (see comment in the code), ksh, zsh and
of course bash.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
|
|
|
|
|
|
|
|
| |
Break up the scripts/poky-env-internal into two parts:
1) Chunk that is sourced and sets up the environment
2) Chunk that is executed and configures the build directory
OEROOT configuration was moved into the initial poky-init-build-env script.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
|
|
|
|
|
|
| |
enabled/disabled modes
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
|
|
| |
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
|
|
|
|
| |
override bitbake's main script
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
|
|
|
|
|
|
| |
In order to support qemu user's flexibility requirement, we add extra
parameter options, user can add extra params such as "<-m 256>"
in poky-qemu script command.
Signed-off-by: Liping ke <liping.ke@intel.com>
|
|
|
|
|
|
|
|
|
|
|
| |
If someone has changed TMPDIR in local.conf to a non-standard location, the
poky-qemu script currently doesn't handle this and assumes if BUILDDIR is set,
$BUILDDIR/tmp will exist.
Its simple to check if this exists and if not, to ask bitbake where the
directory is so this patch changes the code to do that.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
|
|
|
|
|
|
|
|
| |
If we make a test with lsb test suite, then we must creat a large image with lsb test suite.
three function in this script:
1 download lsb test suite
2 creat a block file with 3G
3 install file system of poky-image-lsb, modules of driver and lsb test suite
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
|
|
|
|
|
|
|
| |
User need build kvm module for native kernel and install them by "modprobe
kvm_intel". Then add "kvm" option to poky-qemu to enable it.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
|
|
|
|
|
|
|
|
|
|
| |
* No longer assume SDK toolchains are installed in /opt/poky
* [BUGFIX #568] where specifying paths to both the kernel and fs
image caused an error due to POKY_NATIVE_SYSROOT never being
set, triggering failure of poky-qemu-ifup/ifdown
* Cosmetic improvements to usage() functions by using basename
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
|
|
|
|
|
|
|
|
|
| |
basis for the working "conf" directory.
By using the POKYCONF variable, a meta layer can provide the basic setup for files to
be used during a build. This is similar to the default values stored in the main meta
tree, .../meta/conf/local.conf.sample, etc
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
|
|
|
|
| |
Removing leftover cruft
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
|
|
| |
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
|
|
| |
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
|
|
| |
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
|
|
|
|
|
| |
These variables are not on any bitbake environment whitelist so will never make it into
the environment. This is legacy code which is not required any more so remove it.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
|
|
|
|
|
| |
OEROOT isn't used outside the init script so stop exporting it into the environment
where it can "corrupt" sstate packages.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
|
|
|
|
|
|
|
|
|
| |
This fixes two bugs with poky-qemu when it is run from a
standalone meta-toolchain setup.
[BUGFIX #535] and [BUGFIX #536]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
|
|
|
|
|
| |
scp test is to check if file copying via network work or not in target.
shutdown test is to check if target can be poweroff with qemu process off.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
send-pull-request facilitates sending pull requests generated by
create-pull-request. The primary role of this script is to harvest email
addresses from the patches and send them out. A working installation of sendmail
(exim, postfix, msmtp, etc.) is required to use this script.
You can explicitly specify To addresses with the -t option. As this can be
tedious, the -a option will scan all the patches for To, CC, and *-by lines and
the collected addresses to the To and CC headers for each patch.
This script uses an identical recipients list for every patch, including the
cover letter. This is by design. Existing tools will auto-generate the CC header
for individual patches, but since they don't apply it to the other patches, the
recipients can lack the necessary context to provide a meaningful review. This
is especially true of the cover letter.
The pull directory generated by the create-pull-request script is specified
using the -p option.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Nitin A Kamble <nitin.a.kamble@intel.com>
CC: Richard Purdie <rpurdie@linux.intel.com>
CC: Saul Wold <saul.wold@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous create-pull-request only generated a cover letter. When used to
send to the list, it did not include the patches, which made it difficult
to perform peer review. A pull request without patches is typically only sent
by a maintainer. As we are not all maintainers, we need a means to easily
submit patches for review.
As we are accustomed to making pull requests, this script retains a
git-pull-style cover letter, while sending the relevant patches as responses
to the pull. This will provide the necessary context for peer review, and still
allow people to collapse threads and see no more mail than they were previously.
This version retains the relative_to, commit_id, and contrib_branch arguments
from the original, along with their default values. It adds several more,
resulting in a highly flexible tool.
The script creates a pull directory (pull-$$ by default, configurable via the -o
option) and populates it with a git-format-patch generated patch series and
cover letter. The cover letter is modified to include the git and http pull URLs
and branch name, as well as a basic signature from the author pulled from git's
user.name and user.email config. git-format-patch provides the shortlog and
diffstat of the series.
Breaking a bit from the original, this script maintains the [PATCH] subject
prefix in the cover letter (as opposed to [GIT PULL]. This is better suited to
the majority of developers (who are not maintainers). This prefix is
configurable with the -p option, allowing you to create an [RFC PATCH]
prefix, for example.
By default, the generated cover letter with contain "*** SUBJECT HERE ***" and
"*** BLURB HERE ***" tokens which you should replace with something
appropriate prior to sending the messages.
When developing multiple versions of a patch series, it can save time to
maintain a message.txt file, rather than having to retype the message body of
the cover letter every time. The -m option allows you to specify a message file
and replace the "*** BLURB HERE ***" token of the cover letter with the contents
of the message file.
Finally, the -s option will replace the "*** SUBJECT HERE ***" token in the cover
letter with the specified subject.
The generated patches are suitable for sending via sendmail.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Nitin A Kamble <nitin.a.kamble@intel.com>
CC: Richard Purdie <rpurdie@linux.intel.com>
CC: Saul Wold <saul.wold@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
The patches to follow completely rewrite the existing create-pull-request.
Rather than have an initial diff of the two files (which are not at all
similar) remove the original, and then create the new one.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Nitin A Kamble <nitin.a.kamble@intel.com>
CC: Richard Purdie <rpurdie@linux.intel.com>
CC: Saul Wold <saul.wold@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
|
|
|
|
|
|
|
|
| |
Fixes [BUGID #394]
Now that the qemu/mti mips kernel branches have been fixed
for wacom USB interaction, we can re-nable the standard set
of qemu UI options for qemumips.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
|
|
|
|
|
|
| |
Add a test case for error log check with command dmesg in target. The
case introduces a new folder in target, "/opt/test", which holds test
scripts running in target.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
|
|
|
|
|
|
| |
This fixes [BUGID #100]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
|
|
|
|
|
|
|
|
|
| |
In scenarios where the POKY_NATIVE_SYSROOT env variable hasn't been
set up, bug #427 can still be triggered. This fixes it by running
setup_tmpdir(). This fixes [BUGID #427].
Also, the qemu tap dev lock directory needs to be chmod 777 so that
multiple users can create and delete lock files.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
|
|
|
|
| |
This fixes [BUGID #408]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
|
|
|
|
|
|
|
| |
This fixes [BUGID #433]
Also set a sane default for the ifconfig command, which simplifies
our autobuilder sanity test setup.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
|
|
|
|
| |
This fixes [BUGID #427]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There does not appear to be a universal lockfile utility that
meets our needs. For example:
* 'lockfile' is part of the procmail pacakge in Ubuntu, a
requirement we don't want to impose on our users
* lockfile-[create|remove] from the Ubuntu lockfile-progs
package does not appear to be available in Fedora/openSUSE
So, the most portable way to do this is just to implement it
in bash. The likelihood of race conditions is minimal for
what we need this for.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
|
|
|
|
|
|
|
|
| |
This allows the user to specify a rootfs type
(e.g, poky-image-sato) without typing out the full filename
and path (assuming we can infer a valid MACHINE and FSTYPE).
This fixes [BUGID #415]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Using poky-qemu with our new tap networking and/or unfs support
required too many additional build steps. This updates the
meta-ide-support dependencies so all features are built and
available to use.
Specifically, this adds psuedo-native, qemu-helper-native, and
unfs-server-native to the dependency chain for meta-ide-support.
This fixes [BUGID #392]
Also add poky-gen-tapdevs and remove runqemu-nfs from the
qemu-helper-native recipe, and update some qemu control script
error messages to suggest building meta-ide-support.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
This merges the functionality of the runqemu script into poky-qemu.
It also removes the requirement to order command line args to poky-qemu
in any particular order.
This fixes a slew of runqemu-related bugs by making the runqemu script
obsolete (and fixing the issues in the new poky-qemu), including
[BUGID #294] [BUGID #295] [BUGID #371] and [BUGID #324].
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
|