From 3ff78923ba9f8aa05dd3ca8e779e675b457efffa Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Wed, 9 Jun 2010 12:50:17 +0100 Subject: gcc-4.3.3: Drop unused patches Signed-off-by: Richard Purdie --- .../gcc/gcc-4.3.3/debian/ada-libgnatprj.dpatch | 4809 -------------------- 1 file changed, 4809 deletions(-) delete mode 100644 meta/packages/gcc/gcc-4.3.3/debian/ada-libgnatprj.dpatch (limited to 'meta/packages/gcc/gcc-4.3.3/debian/ada-libgnatprj.dpatch') diff --git a/meta/packages/gcc/gcc-4.3.3/debian/ada-libgnatprj.dpatch b/meta/packages/gcc/gcc-4.3.3/debian/ada-libgnatprj.dpatch deleted file mode 100644 index dcbf30aef..000000000 --- a/meta/packages/gcc/gcc-4.3.3/debian/ada-libgnatprj.dpatch +++ /dev/null @@ -1,4809 +0,0 @@ -#! /bin/sh -e - -# DP: - Introduce a new shared library named libgnatprj, containing -# DP: the GNAT project file manager licensed under the pure GPL, for -# DP: use in GNAT tools, GLADE and GPS. Link the GNAT tools against -# DP: this new library. - -# This patch seems large, but the hunks in Makefile.in are actually -# generated from Makefile.def using autogen. - -# !!! Must be applied after ada-libgnatvsn.dpatch - -dir=./ -if [ $# -eq 3 -a "$2" = '-d' ]; then - pdir="-d $3" - dir="$3/" -elif [ $# -ne 1 ]; then - echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" - exit 1 -fi -case "$1" in - -patch) - patch $pdir -f --no-backup-if-mismatch -p0 < $0 - cd ${dir} && autoconf - ;; - -unpatch) - patch $pdir -f --no-backup-if-mismatch -R -p0 < $0 - ;; - *) - echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" - exit 1 -esac -exit 0 - -Index: gcc/ada/config-lang.in -=================================================================== ---- gcc/ada/config-lang.in.orig -+++ gcc/ada/config-lang.in -@@ -34,8 +34,8 @@ - - outputs=ada/Makefile - --target_libs="target-libada target-libgnatvsn" --lang_dirs="libada libgnatvsn gnattools" -+target_libs="target-libada target-libgnatvsn target-libgnatprj" -+lang_dirs="libada libgnatvsn libgnatprj gnattools" - - # Ada will not work until the front end starts emitting GIMPLE trees. - build_by_default=no -Index: gnattools/Makefile.in -=================================================================== ---- gnattools/Makefile.in.orig -+++ gnattools/Makefile.in -@@ -35,13 +35,13 @@ - target_noncanonical=@target_noncanonical@ - - CFLAGS=-O2 -Wall --INCLUDES = -I@srcdir@/../gcc/ada -I@srcdir@/../gcc - ADA_CFLAGS=-O2 -gnatn --ADA_INCLUDES=-nostdinc -I- -I. -I../gcc/ada/rts -I../libgnatvsn -+ADA_INCLUDES=-nostdinc -I- -I. -I../gcc/ada/rts -I../libgnatvsn -I../libgnatprj - LIB_VERSION=$(strip $(shell grep ' Library_Version :' \ - ../libgnatvsn/gnatvsn.ads | sed -e 's/.*"\(.*\)".*/\1/')) - ADA_LIBS := -L../gcc/ada/rts -lgnat-$(LIB_VERSION) - ADA_LIBS += -L../libgnatvsn -lgnatvsn -+ADA_LIBS += -L../libgnatprj -lgnatprj - - # We will use the just-built compiler to compile and link everything. - GCC=../gcc/xgcc -B../gcc/ -@@ -66,74 +66,18 @@ - - # Since we don't have gnatmake, we must specify the full list of - # object files necessary to build gnatmake and gnatlink. --# TODO: remove from these lists the objects that are part of --# libgnatprj. - GNATLINK_OBJS = \ --ali.o \ --butil.o \ --fmap.o \ - gnatlink.o \ - indepsw.o \ --osint.o \ --prefix.o \ --rident.o \ --sdefault.o \ --stylesw.o \ --switch.o \ --targparm.o \ - validsw.o - - GNATMAKE_OBJS = \ --ali-util.o \ --ali.o \ --binderr.o \ --butil.o \ --err_vars.o \ --erroutc.o \ --errutil.o \ --fmap.o \ - fname-sf.o \ --fname-uf.o \ - gnatmake.o \ - make.o \ - makeusg.o \ --makeutl.o \ --mlib-fil.o \ - mlib-prj.o \ --mlib-tgt.o \ --mlib-tgt-specific.o \ --mlib-utl.o \ --mlib.o \ - osint-m.o \ --osint.o \ --prefix.o \ --prj-attr-pm.o \ --prj-attr.o \ --prj-com.o \ --prj-dect.o \ --prj-env.o \ --prj-err.o \ --prj-ext.o \ --prj-nmsc.o \ --prj-pars.o \ --prj-part.o \ --prj-proc.o \ --prj-strt.o \ --prj-tree.o \ --prj-util.o \ --prj.o \ --rident.o \ --scng.o \ --sdefault.o \ --sfn_scan.o \ --sinput-c.o \ --sinput-p.o \ --styleg.o \ --stylesw.o \ --switch-m.o \ --switch.o \ --targparm.o \ --tempdir.o \ - usage.o \ - validsw.o \ - $(EXTRA_GNATMAKE_OBJS) -@@ -175,11 +119,6 @@ - for file in $(BODIES) $(SPECS); do \ - $(LN_S) -f $$file .; \ - done -- rm -f sdefault.adb; $(LN_S) ../gcc/ada/sdefault.adb . -- $(foreach PAIR,$(TOOLS_TARGET_PAIRS), \ -- rm -f $(word 1,$(subst <, ,$(PAIR)));\ -- $(LN_S) @srcdir@/../gcc/ada/$(word 2,$(subst <, ,$(PAIR))) \ -- $(word 1,$(subst <, ,$(PAIR)));) - touch $@ - - gnattools-native: ../gcc/ada/rts/libgnat-$(LIB_VERSION).so -@@ -192,19 +131,16 @@ - vpath %.c @srcdir@/../gcc/ada:@srcdir@/../gcc - vpath %.h @srcdir@/../gcc/ada - --# Because the just-built gcc is a host tool like us, we can use some --# of its object files, e.g. prefix.o. --vpath prefix.o ../gcc -- - # gnatlink - --gnatlink-static: $(GNATLINK_OBJS) b_gnatl.o link.o -+gnatlink-static: $(GNATLINK_OBJS) b_gnatl.o - $(GCC) -o $@ $^ \ -+ ../libgnatprj/libgnatprj.a \ - ../libgnatvsn/libgnatvsn.a \ - ../gcc/ada/rts/libgnat.a \ - ../libiberty/libiberty.a - --gnatlink: $(GNATLINK_OBJS) b_gnatl.o link.o -+gnatlink: $(GNATLINK_OBJS) b_gnatl.o - $(GCC) -o $@ $^ $(ADA_LIBS) ../libiberty/libiberty.a - - b_gnatl.o: b_gnatl.c adaint.h -@@ -215,13 +151,14 @@ - - # gnatmake - --gnatmake-static: $(GNATMAKE_OBJS) b_gnatm.o link.o -+gnatmake-static: $(GNATMAKE_OBJS) b_gnatm.o - $(GCC) -o $@ $(ADA_CFLAGS) $^ \ -+ ../libgnatprj/libgnatprj.a \ - ../libgnatvsn/libgnatvsn.a \ - ../gcc/ada/rts/libgnat.a \ - ../libiberty/libiberty.a - --gnatmake: $(GNATMAKE_OBJS) b_gnatm.o link.o -+gnatmake: $(GNATMAKE_OBJS) b_gnatm.o - $(GCC) -o $@ $(ADA_CFLAGS) $^ $(ADA_LIBS) ../libiberty/libiberty.a - - b_gnatm.o: b_gnatm.c adaint.h -@@ -231,19 +168,11 @@ - ../gcc/gnatbind -C -o $@ $(ADA_INCLUDES) gnatmake.ali - - # Other tools --gnatkr: -- if [ ! -f $@.adb ] ; then $(LN_S) ../../src/gcc/ada/$@.ad[bs] .; fi -- ./gnatmake-static -c -b $@ $(ADA_CFLAGS) $(ADA_INCLUDES) \ -- --GCC="$(GCC)" \ -- --GNATBIND=../gcc/gnatbind -- ./gnatlink-static -o $@ $@.ali $^ $(ADA_INCLUDES) $(ADA_LIBS) \ -- --GCC="$(GCC) $(ADA_INCLUDES)" -- - gnat: gnatcmd - cp -lp $< $@ - --gnatbind gnatchop gnatclean gnatcmd gnatfind gnatls gnatname gnatprep gnatxref gprmake: \ --link.o prefix.o -+gnatbind gnatchop gnatclean gnatcmd gnatfind gnatkr gnatls gnatname gnatprep \ -+gnatxref gprmake: - if [ ! -f $@.adb ] ; then $(LN_S) ../../src/gcc/ada/$@.ad[bs] .; fi - ./gnatmake-static -c -b $@ $(ADA_CFLAGS) $(ADA_INCLUDES) \ - --GCC="$(GCC)" \ -@@ -252,29 +181,19 @@ - ../libiberty/libiberty.a \ - --GCC="$(GCC) $(ADA_INCLUDES)" - --gnatbl: gnatbl.c link.o prefix.o -+gnatbl: gnatbl.c - $(GCC) -o $@ $< $(CFLAGS) \ - -I../gcc -I@srcdir@/../gcc/config -I@srcdir@/../gcc \ - -I@srcdir@/../include \ - $(filter-out %.c,$^) \ - $(ADA_LIBS) ../libiberty/libiberty.a - --# Force compiling sdefault.adb, not .ads, to produce sdefault.o --sdefault.o: sdefault.adb -- --sdefault.adb: stamp-gnattools-sources -- - %.o: %.adb - $(GCC) -c -o $@ $< $(ADA_CFLAGS) $(ADA_INCLUDES) - - %.o: %.ads - $(GCC) -c -o $@ $< $(ADA_CFLAGS) $(ADA_INCLUDES) - --%.o: %.c -- $(GCC) -c -o $@ $< $(CFLAGS) $(INCLUDES) -- --prefix.o: -- - # Other - # ----- - -Index: libgnatprj/configure -=================================================================== ---- /dev/null -+++ libgnatprj/configure -@@ -0,0 +1,3138 @@ -+#! /bin/sh -+# Guess values for system-dependent variables and create Makefiles. -+# Generated by GNU Autoconf 2.61. -+# -+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -+# This configure script is free software; the Free Software Foundation -+# gives unlimited permission to copy, distribute and modify it. -+## --------------------- ## -+## M4sh Initialization. ## -+## --------------------- ## -+ -+# Be more Bourne compatible -+DUALCASE=1; export DUALCASE # for MKS sh -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+ -+ -+# PATH needs CR -+# Avoid depending upon Character Ranges. -+as_cr_letters='abcdefghijklmnopqrstuvwxyz' -+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -+as_cr_Letters=$as_cr_letters$as_cr_LETTERS -+as_cr_digits='0123456789' -+as_cr_alnum=$as_cr_Letters$as_cr_digits -+ -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ echo "#! /bin/sh" >conf$$.sh -+ echo "exit 0" >>conf$$.sh -+ chmod +x conf$$.sh -+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -+ PATH_SEPARATOR=';' -+ else -+ PATH_SEPARATOR=: -+ fi -+ rm -f conf$$.sh -+fi -+ -+# Support unset when possible. -+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -+ as_unset=unset -+else -+ as_unset=false -+fi -+ -+ -+# IFS -+# We need space, tab and new line, in precisely that order. Quoting is -+# there to prevent editors from complaining about space-tab. -+# (If _AS_PATH_WALK were called with IFS unset, it would disable word -+# splitting by setting IFS to empty value.) -+as_nl=' -+' -+IFS=" "" $as_nl" -+ -+# Find who we are. Look in the path if we contain no directory separator. -+case $0 in -+ *[\\/]* ) as_myself=$0 ;; -+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+done -+IFS=$as_save_IFS -+ -+ ;; -+esac -+# We did not find ourselves, most probably we were run as `sh COMMAND' -+# in which case we are not to be found in the path. -+if test "x$as_myself" = x; then -+ as_myself=$0 -+fi -+if test ! -f "$as_myself"; then -+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 -+ { (exit 1); exit 1; } -+fi -+ -+# Work around bugs in pre-3.0 UWIN ksh. -+for as_var in ENV MAIL MAILPATH -+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+done -+PS1='$ ' -+PS2='> ' -+PS4='+ ' -+ -+# NLS nuisances. -+for as_var in \ -+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ -+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ -+ LC_TELEPHONE LC_TIME -+do -+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then -+ eval $as_var=C; export $as_var -+ else -+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+ fi -+done -+ -+# Required to use basename. -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then -+ as_basename=basename -+else -+ as_basename=false -+fi -+ -+ -+# Name of the executable. -+as_me=`$as_basename -- "$0" || -+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ -+ X"$0" : 'X\(//\)$' \| \ -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || -+echo X/"$0" | -+ sed '/^.*\/\([^/][^/]*\)\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ -+# CDPATH. -+$as_unset CDPATH -+ -+ -+if test "x$CONFIG_SHELL" = x; then -+ if (eval ":") 2>/dev/null; then -+ as_have_required=yes -+else -+ as_have_required=no -+fi -+ -+ if test $as_have_required = yes && (eval ": -+(as_func_return () { -+ (exit \$1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test \$exitcode = 0) || { (exit 1); exit 1; } -+ -+( -+ as_lineno_1=\$LINENO -+ as_lineno_2=\$LINENO -+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && -+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } -+") 2> /dev/null; then -+ : -+else -+ as_candidate_shells= -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ case $as_dir in -+ /*) -+ for as_base in sh bash ksh sh5; do -+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" -+ done;; -+ esac -+done -+IFS=$as_save_IFS -+ -+ -+ for as_shell in $as_candidate_shells $SHELL; do -+ # Try only shells that exist, to save several forks. -+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && -+ { ("$as_shell") 2> /dev/null <<\_ASEOF -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+: -+_ASEOF -+}; then -+ CONFIG_SHELL=$as_shell -+ as_have_required=yes -+ if { "$as_shell" 2> /dev/null <<\_ASEOF -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+: -+(as_func_return () { -+ (exit $1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = "$1" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test $exitcode = 0) || { (exit 1); exit 1; } -+ -+( -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } -+ -+_ASEOF -+}; then -+ break -+fi -+ -+fi -+ -+ done -+ -+ if test "x$CONFIG_SHELL" != x; then -+ for as_var in BASH_ENV ENV -+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+ done -+ export CONFIG_SHELL -+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -+fi -+ -+ -+ if test $as_have_required = no; then -+ echo This script requires a shell more modern than all the -+ echo shells that I found on your system. Please install a -+ echo modern shell, or manually run the script under such a -+ echo shell if you do have one. -+ { (exit 1); exit 1; } -+fi -+ -+ -+fi -+ -+fi -+ -+ -+ -+(eval "as_func_return () { -+ (exit \$1) -+} -+as_func_success () { -+ as_func_return 0 -+} -+as_func_failure () { -+ as_func_return 1 -+} -+as_func_ret_success () { -+ return 0 -+} -+as_func_ret_failure () { -+ return 1 -+} -+ -+exitcode=0 -+if as_func_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_success failed. -+fi -+ -+if as_func_failure; then -+ exitcode=1 -+ echo as_func_failure succeeded. -+fi -+ -+if as_func_ret_success; then -+ : -+else -+ exitcode=1 -+ echo as_func_ret_success failed. -+fi -+ -+if as_func_ret_failure; then -+ exitcode=1 -+ echo as_func_ret_failure succeeded. -+fi -+ -+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then -+ : -+else -+ exitcode=1 -+ echo positional parameters were not saved. -+fi -+ -+test \$exitcode = 0") || { -+ echo No shell found that supports shell functions. -+ echo Please tell autoconf@gnu.org about your system, -+ echo including any error possibly output before this -+ echo message -+} -+ -+ -+ -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { -+ -+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO -+ # uniformly replaced by the line number. The first 'sed' inserts a -+ # line-number line after each line using $LINENO; the second 'sed' -+ # does the real work. The second script uses 'N' to pair each -+ # line-number line with the line containing $LINENO, and appends -+ # trailing '-' during substitution so that $LINENO is not a special -+ # case at line end. -+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -+ # scripts with optimization help from Paolo Bonzini. Blame Lee -+ # E. McMahon (1931-1989) for sed's syntax. :-) -+ sed -n ' -+ p -+ /[$]LINENO/= -+ ' <$as_myself | -+ sed ' -+ s/[$]LINENO.*/&-/ -+ t lineno -+ b -+ :lineno -+ N -+ :loop -+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ -+ t loop -+ s/-\n.*// -+ ' >$as_me.lineno && -+ chmod +x "$as_me.lineno" || -+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 -+ { (exit 1); exit 1; }; } -+ -+ # Don't try to exec as it changes $[0], causing all sort of problems -+ # (the dirname of $[0] is not the place where we might find the -+ # original and so on. Autoconf is especially sensitive to this). -+ . "./$as_me.lineno" -+ # Exit status is that of the last command. -+ exit -+} -+ -+ -+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then -+ as_dirname=dirname -+else -+ as_dirname=false -+fi -+ -+ECHO_C= ECHO_N= ECHO_T= -+case `echo -n x` in -+-n*) -+ case `echo 'x\c'` in -+ *c*) ECHO_T=' ';; # ECHO_T is single tab character. -+ *) ECHO_C='\c';; -+ esac;; -+*) -+ ECHO_N='-n';; -+esac -+ -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+rm -f conf$$ conf$$.exe conf$$.file -+if test -d conf$$.dir; then -+ rm -f conf$$.dir/conf$$.file -+else -+ rm -f conf$$.dir -+ mkdir conf$$.dir -+fi -+echo >conf$$.file -+if ln -s conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s='ln -s' -+ # ... but there are two gotchas: -+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. -+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. -+ # In both cases, we have to default to `cp -p'. -+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || -+ as_ln_s='cp -p' -+elif ln conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s=ln -+else -+ as_ln_s='cp -p' -+fi -+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -+rmdir conf$$.dir 2>/dev/null -+ -+if mkdir -p . 2>/dev/null; then -+ as_mkdir_p=: -+else -+ test -d ./-p && rmdir ./-p -+ as_mkdir_p=false -+fi -+ -+if test -x / >/dev/null 2>&1; then -+ as_test_x='test -x' -+else -+ if ls -dL / >/dev/null 2>&1; then -+ as_ls_L_option=L -+ else -+ as_ls_L_option= -+ fi -+ as_test_x=' -+ eval sh -c '\'' -+ if test -d "$1"; then -+ test -d "$1/."; -+ else -+ case $1 in -+ -*)set "./$1";; -+ esac; -+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in -+ ???[sx]*):;;*)false;;esac;fi -+ '\'' sh -+ ' -+fi -+as_executable_p=$as_test_x -+ -+# Sed expression to map a string onto a valid CPP name. -+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -+ -+# Sed expression to map a string onto a valid variable name. -+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -+ -+ -+ -+exec 7<&0 &1 -+ -+# Name of the host. -+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -+# so uname gets run too. -+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` -+ -+# -+# Initializations. -+# -+ac_default_prefix=/usr/local -+ac_clean_files= -+ac_config_libobj_dir=. -+LIBOBJS= -+cross_compiling=no -+subdirs= -+MFLAGS= -+MAKEFLAGS= -+SHELL=${CONFIG_SHELL-/bin/sh} -+ -+# Identity of this package. -+PACKAGE_NAME= -+PACKAGE_TARNAME= -+PACKAGE_VERSION= -+PACKAGE_STRING= -+PACKAGE_BUGREPORT= -+ -+ac_unique_file="Makefile.in" -+ac_subst_vars='SHELL -+PATH_SEPARATOR -+PACKAGE_NAME -+PACKAGE_TARNAME -+PACKAGE_VERSION -+PACKAGE_STRING -+PACKAGE_BUGREPORT -+exec_prefix -+prefix -+program_transform_name -+bindir -+sbindir -+libexecdir -+datarootdir -+datadir -+sysconfdir -+sharedstatedir -+localstatedir -+includedir -+oldincludedir -+docdir -+infodir -+htmldir -+dvidir -+pdfdir -+psdir -+libdir -+localedir -+mandir -+DEFS -+ECHO_C -+ECHO_N -+ECHO_T -+LIBS -+build_alias -+host_alias -+target_alias -+INSTALL_PROGRAM -+INSTALL_SCRIPT -+INSTALL_DATA -+build -+build_cpu -+build_vendor -+build_os -+host -+host_cpu -+host_vendor -+host_os -+target -+target_cpu -+target_vendor -+target_os -+target_noncanonical -+LN_S -+x_ada_cflags -+default_gnattools_target -+TOOLS_TARGET_PAIRS -+LIBOBJS -+LTLIBOBJS' -+ac_subst_files='' -+ ac_precious_vars='build_alias -+host_alias -+target_alias' -+ -+ -+# Initialize some variables set by options. -+ac_init_help= -+ac_init_version=false -+# The variables have the same names as the options, with -+# dashes changed to underlines. -+cache_file=/dev/null -+exec_prefix=NONE -+no_create= -+no_recursion= -+prefix=NONE -+program_prefix=NONE -+program_suffix=NONE -+program_transform_name=s,x,x, -+silent= -+site= -+srcdir= -+verbose= -+x_includes=NONE -+x_libraries=NONE -+ -+# Installation directory options. -+# These are left unexpanded so users can "make install exec_prefix=/foo" -+# and all the variables that are supposed to be based on exec_prefix -+# by default will actually change. -+# Use braces instead of parens because sh, perl, etc. also accept them. -+# (The list follows the same order as the GNU Coding Standards.) -+bindir='${exec_prefix}/bin' -+sbindir='${exec_prefix}/sbin' -+libexecdir='${exec_prefix}/libexec' -+datarootdir='${prefix}/share' -+datadir='${datarootdir}' -+sysconfdir='${prefix}/etc' -+sharedstatedir='${prefix}/com' -+localstatedir='${prefix}/var' -+includedir='${prefix}/include' -+oldincludedir='/usr/include' -+docdir='${datarootdir}/doc/${PACKAGE}' -+infodir='${datarootdir}/info' -+htmldir='${docdir}' -+dvidir='${docdir}' -+pdfdir='${docdir}' -+psdir='${docdir}' -+libdir='${exec_prefix}/lib' -+localedir='${datarootdir}/locale' -+mandir='${datarootdir}/man' -+ -+ac_prev= -+ac_dashdash= -+for ac_option -+do -+ # If the previous option needs an argument, assign it. -+ if test -n "$ac_prev"; then -+ eval $ac_prev=\$ac_option -+ ac_prev= -+ continue -+ fi -+ -+ case $ac_option in -+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; -+ *) ac_optarg=yes ;; -+ esac -+ -+ # Accept the important Cygnus configure options, so we can diagnose typos. -+ -+ case $ac_dashdash$ac_option in -+ --) -+ ac_dashdash=yes ;; -+ -+ -bindir | --bindir | --bindi | --bind | --bin | --bi) -+ ac_prev=bindir ;; -+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) -+ bindir=$ac_optarg ;; -+ -+ -build | --build | --buil | --bui | --bu) -+ ac_prev=build_alias ;; -+ -build=* | --build=* | --buil=* | --bui=* | --bu=*) -+ build_alias=$ac_optarg ;; -+ -+ -cache-file | --cache-file | --cache-fil | --cache-fi \ -+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) -+ ac_prev=cache_file ;; -+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ -+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) -+ cache_file=$ac_optarg ;; -+ -+ --config-cache | -C) -+ cache_file=config.cache ;; -+ -+ -datadir | --datadir | --datadi | --datad) -+ ac_prev=datadir ;; -+ -datadir=* | --datadir=* | --datadi=* | --datad=*) -+ datadir=$ac_optarg ;; -+ -+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ -+ | --dataroo | --dataro | --datar) -+ ac_prev=datarootdir ;; -+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ -+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) -+ datarootdir=$ac_optarg ;; -+ -+ -disable-* | --disable-*) -+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` -+ # Reject names that are not valid shell variable names. -+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 -+ { (exit 1); exit 1; }; } -+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` -+ eval enable_$ac_feature=no ;; -+ -+ -docdir | --docdir | --docdi | --doc | --do) -+ ac_prev=docdir ;; -+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) -+ docdir=$ac_optarg ;; -+ -+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) -+ ac_prev=dvidir ;; -+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) -+ dvidir=$ac_optarg ;; -+ -+ -enable-* | --enable-*) -+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` -+ # Reject names that are not valid shell variable names. -+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2 -+ { (exit 1); exit 1; }; } -+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` -+ eval enable_$ac_feature=\$ac_optarg ;; -+ -+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ -+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ -+ | --exec | --exe | --ex) -+ ac_prev=exec_prefix ;; -+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ -+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ -+ | --exec=* | --exe=* | --ex=*) -+ exec_prefix=$ac_optarg ;; -+ -+ -gas | --gas | --ga | --g) -+ # Obsolete; use --with-gas. -+ with_gas=yes ;; -+ -+ -help | --help | --hel | --he | -h) -+ ac_init_help=long ;; -+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) -+ ac_init_help=recursive ;; -+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) -+ ac_init_help=short ;; -+ -+ -host | --host | --hos | --ho) -+ ac_prev=host_alias ;; -+ -host=* | --host=* | --hos=* | --ho=*) -+ host_alias=$ac_optarg ;; -+ -+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) -+ ac_prev=htmldir ;; -+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ -+ | --ht=*) -+ htmldir=$ac_optarg ;; -+ -+ -includedir | --includedir | --includedi | --included | --include \ -+ | --includ | --inclu | --incl | --inc) -+ ac_prev=includedir ;; -+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ -+ | --includ=* | --inclu=* | --incl=* | --inc=*) -+ includedir=$ac_optarg ;; -+ -+ -infodir | --infodir | --infodi | --infod | --info | --inf) -+ ac_prev=infodir ;; -+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) -+ infodir=$ac_optarg ;; -+ -+ -libdir | --libdir | --libdi | --libd) -+ ac_prev=libdir ;; -+ -libdir=* | --libdir=* | --libdi=* | --libd=*) -+ libdir=$ac_optarg ;; -+ -+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ -+ | --libexe | --libex | --libe) -+ ac_prev=libexecdir ;; -+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ -+ | --libexe=* | --libex=* | --libe=*) -+ libexecdir=$ac_optarg ;; -+ -+ -localedir | --localedir | --localedi | --localed | --locale) -+ ac_prev=localedir ;; -+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) -+ localedir=$ac_optarg ;; -+ -+ -localstatedir | --localstatedir | --localstatedi | --localstated \ -+ | --localstate | --localstat | --localsta | --localst | --locals) -+ ac_prev=localstatedir ;; -+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ -+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) -+ localstatedir=$ac_optarg ;; -+ -+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m) -+ ac_prev=mandir ;; -+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) -+ mandir=$ac_optarg ;; -+ -+ -nfp | --nfp | --nf) -+ # Obsolete; use --without-fp. -+ with_fp=no ;; -+ -+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \ -+ | --no-cr | --no-c | -n) -+ no_create=yes ;; -+ -+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \ -+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) -+ no_recursion=yes ;; -+ -+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ -+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ -+ | --oldin | --oldi | --old | --ol | --o) -+ ac_prev=oldincludedir ;; -+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ -+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ -+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) -+ oldincludedir=$ac_optarg ;; -+ -+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) -+ ac_prev=prefix ;; -+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) -+ prefix=$ac_optarg ;; -+ -+ -program-prefix | --program-prefix | --program-prefi | --program-pref \ -+ | --program-pre | --program-pr | --program-p) -+ ac_prev=program_prefix ;; -+ -program-prefix=* | --program-prefix=* | --program-prefi=* \ -+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) -+ program_prefix=$ac_optarg ;; -+ -+ -program-suffix | --program-suffix | --program-suffi | --program-suff \ -+ | --program-suf | --program-su | --program-s) -+ ac_prev=program_suffix ;; -+ -program-suffix=* | --program-suffix=* | --program-suffi=* \ -+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) -+ program_suffix=$ac_optarg ;; -+ -+ -program-transform-name | --program-transform-name \ -+ | --program-transform-nam | --program-transform-na \ -+ | --program-transform-n | --program-transform- \ -+ | --program-transform | --program-transfor \ -+ | --program-transfo | --program-transf \ -+ | --program-trans | --program-tran \ -+ | --progr-tra | --program-tr | --program-t) -+ ac_prev=program_transform_name ;; -+ -program-transform-name=* | --program-transform-name=* \ -+ | --program-transform-nam=* | --program-transform-na=* \ -+ | --program-transform-n=* | --program-transform-=* \ -+ | --program-transform=* | --program-transfor=* \ -+ | --program-transfo=* | --program-transf=* \ -+ | --program-trans=* | --program-tran=* \ -+ | --progr-tra=* | --program-tr=* | --program-t=*) -+ program_transform_name=$ac_optarg ;; -+ -+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) -+ ac_prev=pdfdir ;; -+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) -+ pdfdir=$ac_optarg ;; -+ -+ -psdir | --psdir | --psdi | --psd | --ps) -+ ac_prev=psdir ;; -+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) -+ psdir=$ac_optarg ;; -+ -+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ -+ | -silent | --silent | --silen | --sile | --sil) -+ silent=yes ;; -+ -+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) -+ ac_prev=sbindir ;; -+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ -+ | --sbi=* | --sb=*) -+ sbindir=$ac_optarg ;; -+ -+ -sharedstatedir | --sharedstatedir | --sharedstatedi \ -+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ -+ | --sharedst | --shareds | --shared | --share | --shar \ -+ | --sha | --sh) -+ ac_prev=sharedstatedir ;; -+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ -+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ -+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ -+ | --sha=* | --sh=*) -+ sharedstatedir=$ac_optarg ;; -+ -+ -site | --site | --sit) -+ ac_prev=site ;; -+ -site=* | --site=* | --sit=*) -+ site=$ac_optarg ;; -+ -+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) -+ ac_prev=srcdir ;; -+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) -+ srcdir=$ac_optarg ;; -+ -+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ -+ | --syscon | --sysco | --sysc | --sys | --sy) -+ ac_prev=sysconfdir ;; -+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ -+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) -+ sysconfdir=$ac_optarg ;; -+ -+ -target | --target | --targe | --targ | --tar | --ta | --t) -+ ac_prev=target_alias ;; -+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) -+ target_alias=$ac_optarg ;; -+ -+ -v | -verbose | --verbose | --verbos | --verbo | --verb) -+ verbose=yes ;; -+ -+ -version | --version | --versio | --versi | --vers | -V) -+ ac_init_version=: ;; -+ -+ -with-* | --with-*) -+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` -+ # Reject names that are not valid shell variable names. -+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid package name: $ac_package" >&2 -+ { (exit 1); exit 1; }; } -+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` -+ eval with_$ac_package=\$ac_optarg ;; -+ -+ -without-* | --without-*) -+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` -+ # Reject names that are not valid shell variable names. -+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid package name: $ac_package" >&2 -+ { (exit 1); exit 1; }; } -+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` -+ eval with_$ac_package=no ;; -+ -+ --x) -+ # Obsolete; use --with-x. -+ with_x=yes ;; -+ -+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ -+ | --x-incl | --x-inc | --x-in | --x-i) -+ ac_prev=x_includes ;; -+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ -+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) -+ x_includes=$ac_optarg ;; -+ -+ -x-libraries | --x-libraries | --x-librarie | --x-librari \ -+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) -+ ac_prev=x_libraries ;; -+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ -+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) -+ x_libraries=$ac_optarg ;; -+ -+ -*) { echo "$as_me: error: unrecognized option: $ac_option -+Try \`$0 --help' for more information." >&2 -+ { (exit 1); exit 1; }; } -+ ;; -+ -+ *=*) -+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` -+ # Reject names that are not valid shell variable names. -+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && -+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 -+ { (exit 1); exit 1; }; } -+ eval $ac_envvar=\$ac_optarg -+ export $ac_envvar ;; -+ -+ *) -+ # FIXME: should be removed in autoconf 3.0. -+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2 -+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && -+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2 -+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} -+ ;; -+ -+ esac -+done -+ -+if test -n "$ac_prev"; then -+ ac_option=--`echo $ac_prev | sed 's/_/-/g'` -+ { echo "$as_me: error: missing argument to $ac_option" >&2 -+ { (exit 1); exit 1; }; } -+fi -+ -+# Be sure to have absolute directory names. -+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ -+ datadir sysconfdir sharedstatedir localstatedir includedir \ -+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ -+ libdir localedir mandir -+do -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ [\\/$]* | ?:[\\/]* ) continue;; -+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; -+ esac -+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 -+ { (exit 1); exit 1; }; } -+done -+ -+# There might be people who depend on the old broken behavior: `$host' -+# used to hold the argument of --host etc. -+# FIXME: To remove some day. -+build=$build_alias -+host=$host_alias -+target=$target_alias -+ -+# FIXME: To remove some day. -+if test "x$host_alias" != x; then -+ if test "x$build_alias" = x; then -+ cross_compiling=maybe -+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. -+ If a cross compiler is detected then cross compile mode will be used." >&2 -+ elif test "x$build_alias" != "x$host_alias"; then -+ cross_compiling=yes -+ fi -+fi -+ -+ac_tool_prefix= -+test -n "$host_alias" && ac_tool_prefix=$host_alias- -+ -+test "$silent" = yes && exec 6>/dev/null -+ -+ -+ac_pwd=`pwd` && test -n "$ac_pwd" && -+ac_ls_di=`ls -di .` && -+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || -+ { echo "$as_me: error: Working directory cannot be determined" >&2 -+ { (exit 1); exit 1; }; } -+test "X$ac_ls_di" = "X$ac_pwd_ls_di" || -+ { echo "$as_me: error: pwd does not report name of working directory" >&2 -+ { (exit 1); exit 1; }; } -+ -+ -+# Find the source files, if location was not specified. -+if test -z "$srcdir"; then -+ ac_srcdir_defaulted=yes -+ # Try the directory containing this script, then the parent directory. -+ ac_confdir=`$as_dirname -- "$0" || -+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$0" : 'X\(//\)[^/]' \| \ -+ X"$0" : 'X\(//\)$' \| \ -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || -+echo X"$0" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ srcdir=$ac_confdir -+ if test ! -r "$srcdir/$ac_unique_file"; then -+ srcdir=.. -+ fi -+else -+ ac_srcdir_defaulted=no -+fi -+if test ! -r "$srcdir/$ac_unique_file"; then -+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." -+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 -+ { (exit 1); exit 1; }; } -+fi -+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -+ac_abs_confdir=`( -+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 -+ { (exit 1); exit 1; }; } -+ pwd)` -+# When building in place, set srcdir=. -+if test "$ac_abs_confdir" = "$ac_pwd"; then -+ srcdir=. -+fi -+# Remove unnecessary trailing slashes from srcdir. -+# Double slashes in file names in object file debugging info -+# mess up M-x gdb in Emacs. -+case $srcdir in -+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -+esac -+for ac_var in $ac_precious_vars; do -+ eval ac_env_${ac_var}_set=\${${ac_var}+set} -+ eval ac_env_${ac_var}_value=\$${ac_var} -+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} -+ eval ac_cv_env_${ac_var}_value=\$${ac_var} -+done -+ -+# -+# Report the --help message. -+# -+if test "$ac_init_help" = "long"; then -+ # Omit some internal or obsolete options to make the list less imposing. -+ # This message is too long to be a string in the A/UX 3.1 sh. -+ cat <<_ACEOF -+\`configure' configures this package to adapt to many kinds of systems. -+ -+Usage: $0 [OPTION]... [VAR=VALUE]... -+ -+To assign environment variables (e.g., CC, CFLAGS...), specify them as -+VAR=VALUE. See below for descriptions of some of the useful variables. -+ -+Defaults for the options are specified in brackets. -+ -+Configuration: -+ -h, --help display this help and exit -+ --help=short display options specific to this package -+ --help=recursive display the short help of all the included packages -+ -V, --version display version information and exit -+ -q, --quiet, --silent do not print \`checking...' messages -+ --cache-file=FILE cache test results in FILE [disabled] -+ -C, --config-cache alias for \`--cache-file=config.cache' -+ -n, --no-create do not create output files -+ --srcdir=DIR find the sources in DIR [configure dir or \`..'] -+ -+Installation directories: -+ --prefix=PREFIX install architecture-independent files in PREFIX -+ [$ac_default_prefix] -+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX -+ [PREFIX] -+ -+By default, \`make install' will install all the files in -+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -+an installation prefix other than \`$ac_default_prefix' using \`--prefix', -+for instance \`--prefix=\$HOME'. -+ -+For better control, use the options below. -+ -+Fine tuning of the installation directories: -+ --bindir=DIR user executables [EPREFIX/bin] -+ --sbindir=DIR system admin executables [EPREFIX/sbin] -+ --libexecdir=DIR program executables [EPREFIX/libexec] -+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc] -+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] -+ --localstatedir=DIR modifiable single-machine data [PREFIX/var] -+ --libdir=DIR object code libraries [EPREFIX/lib] -+ --includedir=DIR C header files [PREFIX/include] -+ --oldincludedir=DIR C header files for non-gcc [/usr/include] -+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] -+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] -+ --infodir=DIR info documentation [DATAROOTDIR/info] -+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] -+ --mandir=DIR man documentation [DATAROOTDIR/man] -+ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] -+ --htmldir=DIR html documentation [DOCDIR] -+ --dvidir=DIR dvi documentation [DOCDIR] -+ --pdfdir=DIR pdf documentation [DOCDIR] -+ --psdir=DIR ps documentation [DOCDIR] -+_ACEOF -+ -+ cat <<\_ACEOF -+ -+System types: -+ --build=BUILD configure for building on BUILD [guessed] -+ --host=HOST cross-compile to build programs to run on HOST [BUILD] -+ --target=TARGET configure for building compilers for TARGET [HOST] -+_ACEOF -+fi -+ -+if test -n "$ac_init_help"; then -+ -+ cat <<\_ACEOF -+ -+_ACEOF -+ac_status=$? -+fi -+ -+if test "$ac_init_help" = "recursive"; then -+ # If there are subdirs, report their specific --help. -+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue -+ test -d "$ac_dir" || continue -+ ac_builddir=. -+ -+case "$ac_dir" in -+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -+*) -+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -+ # A ".." for each directory in $ac_dir_suffix. -+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` -+ case $ac_top_builddir_sub in -+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; -+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -+ esac ;; -+esac -+ac_abs_top_builddir=$ac_pwd -+ac_abs_builddir=$ac_pwd$ac_dir_suffix -+# for backward compatibility: -+ac_top_builddir=$ac_top_build_prefix -+ -+case $srcdir in -+ .) # We are building in place. -+ ac_srcdir=. -+ ac_top_srcdir=$ac_top_builddir_sub -+ ac_abs_top_srcdir=$ac_pwd ;; -+ [\\/]* | ?:[\\/]* ) # Absolute name. -+ ac_srcdir=$srcdir$ac_dir_suffix; -+ ac_top_srcdir=$srcdir -+ ac_abs_top_srcdir=$srcdir ;; -+ *) # Relative name. -+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_build_prefix$srcdir -+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -+esac -+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix -+ -+ cd "$ac_dir" || { ac_status=$?; continue; } -+ # Check for guested configure. -+ if test -f "$ac_srcdir/configure.gnu"; then -+ echo && -+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive -+ elif test -f "$ac_srcdir/configure"; then -+ echo && -+ $SHELL "$ac_srcdir/configure" --help=recursive -+ else -+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 -+ fi || ac_status=$? -+ cd "$ac_pwd" || { ac_status=$?; break; } -+ done -+fi -+ -+test -n "$ac_init_help" && exit $ac_status -+if $ac_init_version; then -+ cat <<\_ACEOF -+configure -+generated by GNU Autoconf 2.61 -+ -+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -+This configure script is free software; the Free Software Foundation -+gives unlimited permission to copy, distribute and modify it. -+_ACEOF -+ exit -+fi -+cat >config.log <<_ACEOF -+This file contains any messages produced by compilers while -+running configure, to aid debugging if configure makes a mistake. -+ -+It was created by $as_me, which was -+generated by GNU Autoconf 2.61. Invocation command line was -+ -+ $ $0 $@ -+ -+_ACEOF -+exec 5>>config.log -+{ -+cat <<_ASUNAME -+## --------- ## -+## Platform. ## -+## --------- ## -+ -+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -+uname -m = `(uname -m) 2>/dev/null || echo unknown` -+uname -r = `(uname -r) 2>/dev/null || echo unknown` -+uname -s = `(uname -s) 2>/dev/null || echo unknown` -+uname -v = `(uname -v) 2>/dev/null || echo unknown` -+ -+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` -+ -+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` -+ -+_ASUNAME -+ -+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ echo "PATH: $as_dir" -+done -+IFS=$as_save_IFS -+ -+} >&5 -+ -+cat >&5 <<_ACEOF -+ -+ -+## ----------- ## -+## Core tests. ## -+## ----------- ## -+ -+_ACEOF -+ -+ -+# Keep a trace of the command line. -+# Strip out --no-create and --no-recursion so they do not pile up. -+# Strip out --silent because we don't want to record it for future runs. -+# Also quote any args containing shell meta-characters. -+# Make two passes to allow for proper duplicate-argument suppression. -+ac_configure_args= -+ac_configure_args0= -+ac_configure_args1= -+ac_must_keep_next=false -+for ac_pass in 1 2 -+do -+ for ac_arg -+ do -+ case $ac_arg in -+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; -+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ -+ | -silent | --silent | --silen | --sile | --sil) -+ continue ;; -+ *\'*) -+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; -+ esac -+ case $ac_pass in -+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; -+ 2) -+ ac_configure_args1="$ac_configure_args1 '$ac_arg'" -+ if test $ac_must_keep_next = true; then -+ ac_must_keep_next=false # Got value, back to normal. -+ else -+ case $ac_arg in -+ *=* | --config-cache | -C | -disable-* | --disable-* \ -+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ -+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ -+ | -with-* | --with-* | -without-* | --without-* | --x) -+ case "$ac_configure_args0 " in -+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; -+ esac -+ ;; -+ -* ) ac_must_keep_next=true ;; -+ esac -+ fi -+ ac_configure_args="$ac_configure_args '$ac_arg'" -+ ;; -+ esac -+ done -+done -+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } -+ -+# When interrupted or exit'd, cleanup temporary files, and complete -+# config.log. We remove comments because anyway the quotes in there -+# would cause problems or look ugly. -+# WARNING: Use '\'' to represent an apostrophe within the trap. -+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -+trap 'exit_status=$? -+ # Save into config.log some information that might help in debugging. -+ { -+ echo -+ -+ cat <<\_ASBOX -+## ---------------- ## -+## Cache variables. ## -+## ---------------- ## -+_ASBOX -+ echo -+ # The following way of writing the cache mishandles newlines in values, -+( -+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do -+ eval ac_val=\$$ac_var -+ case $ac_val in #( -+ *${as_nl}*) -+ case $ac_var in #( -+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; -+ esac -+ case $ac_var in #( -+ _ | IFS | as_nl) ;; #( -+ *) $as_unset $ac_var ;; -+ esac ;; -+ esac -+ done -+ (set) 2>&1 | -+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( -+ *${as_nl}ac_space=\ *) -+ sed -n \ -+ "s/'\''/'\''\\\\'\'''\''/g; -+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" -+ ;; #( -+ *) -+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" -+ ;; -+ esac | -+ sort -+) -+ echo -+ -+ cat <<\_ASBOX -+## ----------------- ## -+## Output variables. ## -+## ----------------- ## -+_ASBOX -+ echo -+ for ac_var in $ac_subst_vars -+ do -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; -+ esac -+ echo "$ac_var='\''$ac_val'\''" -+ done | sort -+ echo -+ -+ if test -n "$ac_subst_files"; then -+ cat <<\_ASBOX -+## ------------------- ## -+## File substitutions. ## -+## ------------------- ## -+_ASBOX -+ echo -+ for ac_var in $ac_subst_files -+ do -+ eval ac_val=\$$ac_var -+ case $ac_val in -+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; -+ esac -+ echo "$ac_var='\''$ac_val'\''" -+ done | sort -+ echo -+ fi -+ -+ if test -s confdefs.h; then -+ cat <<\_ASBOX -+## ----------- ## -+## confdefs.h. ## -+## ----------- ## -+_ASBOX -+ echo -+ cat confdefs.h -+ echo -+ fi -+ test "$ac_signal" != 0 && -+ echo "$as_me: caught signal $ac_signal" -+ echo "$as_me: exit $exit_status" -+ } >&5 -+ rm -f core *.core core.conftest.* && -+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && -+ exit $exit_status -+' 0 -+for ac_signal in 1 2 13 15; do -+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -+done -+ac_signal=0 -+ -+# confdefs.h avoids OS command line length limits that DEFS can exceed. -+rm -f -r conftest* confdefs.h -+ -+# Predefined preprocessor variables. -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_NAME "$PACKAGE_NAME" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_VERSION "$PACKAGE_VERSION" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_STRING "$PACKAGE_STRING" -+_ACEOF -+ -+ -+cat >>confdefs.h <<_ACEOF -+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -+_ACEOF -+ -+ -+# Let the site file select an alternate cache file if it wants to. -+# Prefer explicitly selected file to automatically selected ones. -+if test -n "$CONFIG_SITE"; then -+ set x "$CONFIG_SITE" -+elif test "x$prefix" != xNONE; then -+ set x "$prefix/share/config.site" "$prefix/etc/config.site" -+else -+ set x "$ac_default_prefix/share/config.site" \ -+ "$ac_default_prefix/etc/config.site" -+fi -+shift -+for ac_site_file -+do -+ if test -r "$ac_site_file"; then -+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -+echo "$as_me: loading site script $ac_site_file" >&6;} -+ sed 's/^/| /' "$ac_site_file" >&5 -+ . "$ac_site_file" -+ fi -+done -+ -+if test -r "$cache_file"; then -+ # Some versions of bash will fail to source /dev/null (special -+ # files actually), so we avoid doing that. -+ if test -f "$cache_file"; then -+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -+echo "$as_me: loading cache $cache_file" >&6;} -+ case $cache_file in -+ [\\/]* | ?:[\\/]* ) . "$cache_file";; -+ *) . "./$cache_file";; -+ esac -+ fi -+else -+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -+echo "$as_me: creating cache $cache_file" >&6;} -+ >$cache_file -+fi -+ -+# Check that the precious variables saved in the cache have kept the same -+# value. -+ac_cache_corrupted=false -+for ac_var in $ac_precious_vars; do -+ eval ac_old_set=\$ac_cv_env_${ac_var}_set -+ eval ac_new_set=\$ac_env_${ac_var}_set -+ eval ac_old_val=\$ac_cv_env_${ac_var}_value -+ eval ac_new_val=\$ac_env_${ac_var}_value -+ case $ac_old_set,$ac_new_set in -+ set,) -+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} -+ ac_cache_corrupted=: ;; -+ ,set) -+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} -+ ac_cache_corrupted=: ;; -+ ,);; -+ *) -+ if test "x$ac_old_val" != "x$ac_new_val"; then -+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} -+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -+echo "$as_me: former value: $ac_old_val" >&2;} -+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -+echo "$as_me: current value: $ac_new_val" >&2;} -+ ac_cache_corrupted=: -+ fi;; -+ esac -+ # Pass precious variables to config.status. -+ if test "$ac_new_set" = set; then -+ case $ac_new_val in -+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; -+ *) ac_arg=$ac_var=$ac_new_val ;; -+ esac -+ case " $ac_configure_args " in -+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. -+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; -+ esac -+ fi -+done -+if $ac_cache_corrupted; then -+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -+echo "$as_me: error: changes in the environment can compromise the build" >&2;} -+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ac_ext=c -+ac_cpp='$CPP $CPPFLAGS' -+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -+ac_compiler_gnu=$ac_cv_c_compiler_gnu -+ -+ -+ -+ -+ -+ -+# Start of actual configure tests -+ -+ac_aux_dir= -+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do -+ if test -f "$ac_dir/install-sh"; then -+ ac_aux_dir=$ac_dir -+ ac_install_sh="$ac_aux_dir/install-sh -c" -+ break -+ elif test -f "$ac_dir/install.sh"; then -+ ac_aux_dir=$ac_dir -+ ac_install_sh="$ac_aux_dir/install.sh -c" -+ break -+ elif test -f "$ac_dir/shtool"; then -+ ac_aux_dir=$ac_dir -+ ac_install_sh="$ac_aux_dir/shtool install -c" -+ break -+ fi -+done -+if test -z "$ac_aux_dir"; then -+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 -+echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+# These three variables are undocumented and unsupported, -+# and are intended to be withdrawn in a future Autoconf release. -+# They can cause serious problems if a builder's source tree is in a directory -+# whose full name contains unusual characters. -+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. -+ -+ -+# Find a good install program. We prefer a C program (faster), -+# so one script is as good as another. But avoid the broken or -+# incompatible versions: -+# SysV /etc/install, /usr/sbin/install -+# SunOS /usr/etc/install -+# IRIX /sbin/install -+# AIX /bin/install -+# AmigaOS /C/install, which installs bootblocks on floppy discs -+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -+# AFS /usr/afsws/bin/install, which mishandles nonexistent args -+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -+# OS/2's system install, which has a completely different semantic -+# ./install, which can be erroneously created by make from ./install.sh. -+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } -+if test -z "$INSTALL"; then -+if test "${ac_cv_path_install+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ # Account for people who put trailing slashes in PATH elements. -+case $as_dir/ in -+ ./ | .// | /cC/* | \ -+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ -+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ -+ /usr/ucb/* ) ;; -+ *) -+ # OSF1 and SCO ODT 3.0 have their own names for install. -+ # Don't use installbsd from OSF since it installs stuff as root -+ # by default. -+ for ac_prog in ginstall scoinst install; do -+ for ac_exec_ext in '' $ac_executable_extensions; do -+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then -+ if test $ac_prog = install && -+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then -+ # AIX install. It has an incompatible calling convention. -+ : -+ elif test $ac_prog = install && -+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then -+ # program-specific install script used by HP pwplus--don't use. -+ : -+ else -+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" -+ break 3 -+ fi -+ fi -+ done -+ done -+ ;; -+esac -+done -+IFS=$as_save_IFS -+ -+ -+fi -+ if test "${ac_cv_path_install+set}" = set; then -+ INSTALL=$ac_cv_path_install -+ else -+ # As a last resort, use the slow shell script. Don't cache a -+ # value for INSTALL within a source directory, because that will -+ # break other packages using the cache if that directory is -+ # removed, or if the value is a relative name. -+ INSTALL=$ac_install_sh -+ fi -+fi -+{ echo "$as_me:$LINENO: result: $INSTALL" >&5 -+echo "${ECHO_T}$INSTALL" >&6; } -+ -+# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -+# It thinks the first close brace ends the variable substitution. -+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' -+ -+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' -+ -+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -+ -+ -+# Make sure we can run config.sub. -+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || -+ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 -+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} -+ { (exit 1); exit 1; }; } -+ -+{ echo "$as_me:$LINENO: checking build system type" >&5 -+echo $ECHO_N "checking build system type... $ECHO_C" >&6; } -+if test "${ac_cv_build+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ ac_build_alias=$build_alias -+test "x$ac_build_alias" = x && -+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -+test "x$ac_build_alias" = x && -+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -+echo "$as_me: error: cannot guess build type; you must specify one" >&2;} -+ { (exit 1); exit 1; }; } -+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || -+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 -+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} -+ { (exit 1); exit 1; }; } -+ -+fi -+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -+echo "${ECHO_T}$ac_cv_build" >&6; } -+case $ac_cv_build in -+*-*-*) ;; -+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 -+echo "$as_me: error: invalid value of canonical build" >&2;} -+ { (exit 1); exit 1; }; };; -+esac -+build=$ac_cv_build -+ac_save_IFS=$IFS; IFS='-' -+set x $ac_cv_build -+shift -+build_cpu=$1 -+build_vendor=$2 -+shift; shift -+# Remember, the first character of IFS is used to create $*, -+# except with old shells: -+build_os=$* -+IFS=$ac_save_IFS -+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac -+ -+ -+{ echo "$as_me:$LINENO: checking host system type" >&5 -+echo $ECHO_N "checking host system type... $ECHO_C" >&6; } -+if test "${ac_cv_host+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test "x$host_alias" = x; then -+ ac_cv_host=$ac_cv_build -+else -+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || -+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 -+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+fi -+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -+echo "${ECHO_T}$ac_cv_host" >&6; } -+case $ac_cv_host in -+*-*-*) ;; -+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 -+echo "$as_me: error: invalid value of canonical host" >&2;} -+ { (exit 1); exit 1; }; };; -+esac -+host=$ac_cv_host -+ac_save_IFS=$IFS; IFS='-' -+set x $ac_cv_host -+shift -+host_cpu=$1 -+host_vendor=$2 -+shift; shift -+# Remember, the first character of IFS is used to create $*, -+# except with old shells: -+host_os=$* -+IFS=$ac_save_IFS -+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac -+ -+ -+{ echo "$as_me:$LINENO: checking target system type" >&5 -+echo $ECHO_N "checking target system type... $ECHO_C" >&6; } -+if test "${ac_cv_target+set}" = set; then -+ echo $ECHO_N "(cached) $ECHO_C" >&6 -+else -+ if test "x$target_alias" = x; then -+ ac_cv_target=$ac_cv_host -+else -+ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || -+ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 -+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} -+ { (exit 1); exit 1; }; } -+fi -+ -+fi -+{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5 -+echo "${ECHO_T}$ac_cv_target" >&6; } -+case $ac_cv_target in -+*-*-*) ;; -+*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 -+echo "$as_me: error: invalid value of canonical target" >&2;} -+ { (exit 1); exit 1; }; };; -+esac -+target=$ac_cv_target -+ac_save_IFS=$IFS; IFS='-' -+set x $ac_cv_target -+shift -+target_cpu=$1 -+target_vendor=$2 -+shift; shift -+# Remember, the first character of IFS is used to create $*, -+# except with old shells: -+target_os=$* -+IFS=$ac_save_IFS -+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac -+ -+ -+# The aliases save the names the user supplied, while $host etc. -+# will get canonicalized. -+test -n "$target_alias" && -+ test "$program_prefix$program_suffix$program_transform_name" = \ -+ NONENONEs,x,x, && -+ program_prefix=${target_alias}- -+ -+# Autoconf M4 include file defining utility macros for complex Canadian -+# cross builds. -+ -+ -+ -+ -+ -+ -+ -+ -+ -+#### -+# _NCN_TOOL_PREFIXES: Some stuff that oughtta be done in AC_CANONICAL_SYSTEM -+# or AC_INIT. -+# These demand that AC_CANONICAL_SYSTEM be called beforehand. -+ -+#### -+# NCN_STRICT_CHECK_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path]) -+# Like plain AC_CHECK_TOOLS, but require prefix if build!=host. -+ -+ -+#### -+# NCN_STRICT_CHECK_TARGET_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path]) -+# Like CVS Autoconf AC_CHECK_TARGET_TOOLS, but require prefix if build!=target. -+ -+ -+ -+# Backported from Autoconf 2.5x; can go away when and if -+# we switch. Put the OS path separator in $PATH_SEPARATOR. -+ -+ -+ -+ -+# ACX_HAVE_GCC_FOR_TARGET -+# Check if the variable GCC_FOR_TARGET really points to a GCC binary. -+ -+ -+# ACX_CHECK_INSTALLED_TARGET_TOOL(VAR, PROG) -+# Searching for installed target binutils. We need to take extra care, -+# else we may find the wrong assembler, linker, etc., and lose. -+# -+# First try --with-build-time-tools, if specified. -+# -+# For build != host, we ask the installed GCC for the name of the tool it -+# uses, and accept it if it is an absolute path. This is because the -+# only good choice for a compiler is the same GCC version that is being -+# installed (or we couldn't make target libraries), and we assume that -+# on the host system we'll have not only the same GCC version, but also -+# the same binutils version. -+# -+# For build == host, search the same directories that the installed -+# compiler will search. We used to do this for the assembler, linker, -+# and nm only; for simplicity of configuration, however, we extend this -+# criterion to tools (such as ar and ranlib) that are never invoked by -+# the compiler, to avoid mismatches. -+# -+# Also note we have to check MD_EXEC_PREFIX before checking the user's path -+# if build == target. This makes the most sense only when bootstrapping, -+# but we also do so when build != host. In this case, we hope that the -+# build and host systems will have similar contents of MD_EXEC_PREFIX. -+# -+# If we do not find a suitable binary, then try the user's path. -+ -+ -+### -+# AC_PROG_CPP_WERROR -+# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which -+# triggers warnings from the preprocessor. Will be in autoconf 2.58. -+# For now, using this also overrides header checks to use only the -+# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a -+# bit harder from here). -+# Eventually autoconf will default to checking headers with the compiler -+# instead, and we'll have to do this differently. -+ -+# AC_PROG_CPP_WERROR -+ -+# Test for GNAT. -+# We require the gnatbind program, and a compiler driver that -+# understands Ada. We use the user's CC setting, already found. -+# -+# Sets the shell variable have_gnat to yes or no as appropriate, and -+# substitutes GNATBIND and GNATMAKE. -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ case ${build_alias} in -+ "") build_noncanonical=${build} ;; -+ *) build_noncanonical=${build_alias} ;; -+esac -+ -+ case ${host_alias} in -+ "") host_noncanonical=${build_noncanonical} ;; -+ *) host_noncanonical=${host_alias} ;; -+esac -+ -+ case ${target_alias} in -+ "") target_noncanonical=${host_noncanonical} ;; -+ *) target_noncanonical=${target_alias} ;; -+esac -+ -+ -+ -+ -+# Need to pass this down for now :-P -+{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 -+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } -+LN_S=$as_ln_s -+if test "$LN_S" = "ln -s"; then -+ { echo "$as_me:$LINENO: result: yes" >&5 -+echo "${ECHO_T}yes" >&6; } -+else -+ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 -+echo "${ECHO_T}no, using $LN_S" >&6; } -+fi -+ -+ -+# Determine x_ada_cflags -+case $host in -+ hppa*) x_ada_cflags=-mdisable-indexing ;; -+ *) x_ada_cflags= ;; -+esac -+ -+ -+# Determine what to build for 'gnattools' -+if test $build = $target ; then -+ # Note that build=target is almost certainly the wrong test; FIXME -+ default_gnattools_target="gnattools-native" -+else -+ default_gnattools_target="gnattools-cross" -+fi -+ -+ -+# Target-specific stuff (defaults) -+TOOLS_TARGET_PAIRS= -+ -+ -+# Per-target case statement -+# ------------------------- -+case "${target}" in -+ alpha*-dec-vx*) # Unlike all other Vxworks -+ ;; -+ m68k*-wrs-vx* \ -+ | powerpc*-wrs-vxworks \ -+ | sparc*-wrs-vx* \ -+ | *86-wrs-vxworks \ -+ | xscale*-wrs-vx* \ -+ | xscale*-wrs-coff \ -+ | mips*-wrs-vx*) -+ TOOLS_TARGET_PAIRS="mlib-tgt-specific.adbconfcache <<\_ACEOF -+# This file is a shell script that caches the results of configure -+# tests run on this system so they can be shared between configure -+# scripts and configure runs, see configure's option --config-cache. -+# It is not useful on other systems. If it contains results you don't -+# want to keep, you may remove or edit it. -+# -+# config.status only pays attention to the cache file if you give it -+# the --recheck option to rerun configure. -+# -+# `ac_cv_env_foo' variables (set or unset) will be overridden when -+# loading this file, other *unset* `ac_cv_foo' will be assigned the -+# following values. -+ -+_ACEOF -+ -+# The following way of writing the cache mishandles newlines in values, -+# but we know of no workaround that is simple, portable, and efficient. -+# So, we kill variables containing newlines. -+# Ultrix sh set writes to stderr and can't be redirected directly, -+# and sets the high bit in the cache file unless we assign to the vars. -+( -+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do -+ eval ac_val=\$$ac_var -+ case $ac_val in #( -+ *${as_nl}*) -+ case $ac_var in #( -+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; -+ esac -+ case $ac_var in #( -+ _ | IFS | as_nl) ;; #( -+ *) $as_unset $ac_var ;; -+ esac ;; -+ esac -+ done -+ -+ (set) 2>&1 | -+ case $as_nl`(ac_space=' '; set) 2>&1` in #( -+ *${as_nl}ac_space=\ *) -+ # `set' does not quote correctly, so add quotes (double-quote -+ # substitution turns \\\\ into \\, and sed turns \\ into \). -+ sed -n \ -+ "s/'/'\\\\''/g; -+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" -+ ;; #( -+ *) -+ # `set' quotes correctly as required by POSIX, so do not add quotes. -+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" -+ ;; -+ esac | -+ sort -+) | -+ sed ' -+ /^ac_cv_env_/b end -+ t clear -+ :clear -+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ -+ t end -+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ -+ :end' >>confcache -+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else -+ if test -w "$cache_file"; then -+ test "x$cache_file" != "x/dev/null" && -+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 -+echo "$as_me: updating cache $cache_file" >&6;} -+ cat confcache >$cache_file -+ else -+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 -+echo "$as_me: not updating unwritable cache $cache_file" >&6;} -+ fi -+fi -+rm -f confcache -+ -+test "x$prefix" = xNONE && prefix=$ac_default_prefix -+# Let make expand exec_prefix. -+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -+ -+# Transform confdefs.h into DEFS. -+# Protect against shell expansion while executing Makefile rules. -+# Protect against Makefile macro expansion. -+# -+# If the first sed substitution is executed (which looks for macros that -+# take arguments), then branch to the quote section. Otherwise, -+# look for a macro that doesn't take arguments. -+ac_script=' -+t clear -+:clear -+s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g -+t quote -+s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g -+t quote -+b any -+:quote -+s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g -+s/\[/\\&/g -+s/\]/\\&/g -+s/\$/$$/g -+H -+:any -+${ -+ g -+ s/^\n// -+ s/\n/ /g -+ p -+} -+' -+DEFS=`sed -n "$ac_script" confdefs.h` -+ -+ -+ac_libobjs= -+ac_ltlibobjs= -+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue -+ # 1. Remove the extension, and $U if already installed. -+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' -+ ac_i=`echo "$ac_i" | sed "$ac_script"` -+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR -+ # will be set to the directory where LIBOBJS objects are built. -+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" -+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' -+done -+LIBOBJS=$ac_libobjs -+ -+LTLIBOBJS=$ac_ltlibobjs -+ -+ -+ -+: ${CONFIG_STATUS=./config.status} -+ac_clean_files_save=$ac_clean_files -+ac_clean_files="$ac_clean_files $CONFIG_STATUS" -+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -+echo "$as_me: creating $CONFIG_STATUS" >&6;} -+cat >$CONFIG_STATUS <<_ACEOF -+#! $SHELL -+# Generated by $as_me. -+# Run this file to recreate the current configuration. -+# Compiler output produced by configure, useful for debugging -+# configure, is in config.log if it exists. -+ -+debug=false -+ac_cs_recheck=false -+ac_cs_silent=false -+SHELL=\${CONFIG_SHELL-$SHELL} -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+## --------------------- ## -+## M4sh Initialization. ## -+## --------------------- ## -+ -+# Be more Bourne compatible -+DUALCASE=1; export DUALCASE # for MKS sh -+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then -+ emulate sh -+ NULLCMD=: -+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which -+ # is contrary to our usage. Disable this feature. -+ alias -g '${1+"$@"}'='"$@"' -+ setopt NO_GLOB_SUBST -+else -+ case `(set -o) 2>/dev/null` in -+ *posix*) set -o posix ;; -+esac -+ -+fi -+ -+ -+ -+ -+# PATH needs CR -+# Avoid depending upon Character Ranges. -+as_cr_letters='abcdefghijklmnopqrstuvwxyz' -+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -+as_cr_Letters=$as_cr_letters$as_cr_LETTERS -+as_cr_digits='0123456789' -+as_cr_alnum=$as_cr_Letters$as_cr_digits -+ -+# The user is always right. -+if test "${PATH_SEPARATOR+set}" != set; then -+ echo "#! /bin/sh" >conf$$.sh -+ echo "exit 0" >>conf$$.sh -+ chmod +x conf$$.sh -+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then -+ PATH_SEPARATOR=';' -+ else -+ PATH_SEPARATOR=: -+ fi -+ rm -f conf$$.sh -+fi -+ -+# Support unset when possible. -+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -+ as_unset=unset -+else -+ as_unset=false -+fi -+ -+ -+# IFS -+# We need space, tab and new line, in precisely that order. Quoting is -+# there to prevent editors from complaining about space-tab. -+# (If _AS_PATH_WALK were called with IFS unset, it would disable word -+# splitting by setting IFS to empty value.) -+as_nl=' -+' -+IFS=" "" $as_nl" -+ -+# Find who we are. Look in the path if we contain no directory separator. -+case $0 in -+ *[\\/]* ) as_myself=$0 ;; -+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -+for as_dir in $PATH -+do -+ IFS=$as_save_IFS -+ test -z "$as_dir" && as_dir=. -+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -+done -+IFS=$as_save_IFS -+ -+ ;; -+esac -+# We did not find ourselves, most probably we were run as `sh COMMAND' -+# in which case we are not to be found in the path. -+if test "x$as_myself" = x; then -+ as_myself=$0 -+fi -+if test ! -f "$as_myself"; then -+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 -+ { (exit 1); exit 1; } -+fi -+ -+# Work around bugs in pre-3.0 UWIN ksh. -+for as_var in ENV MAIL MAILPATH -+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+done -+PS1='$ ' -+PS2='> ' -+PS4='+ ' -+ -+# NLS nuisances. -+for as_var in \ -+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ -+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ -+ LC_TELEPHONE LC_TIME -+do -+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then -+ eval $as_var=C; export $as_var -+ else -+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -+ fi -+done -+ -+# Required to use basename. -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then -+ as_basename=basename -+else -+ as_basename=false -+fi -+ -+ -+# Name of the executable. -+as_me=`$as_basename -- "$0" || -+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ -+ X"$0" : 'X\(//\)$' \| \ -+ X"$0" : 'X\(/\)' \| . 2>/dev/null || -+echo X/"$0" | -+ sed '/^.*\/\([^/][^/]*\)\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\/\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ -+# CDPATH. -+$as_unset CDPATH -+ -+ -+ -+ as_lineno_1=$LINENO -+ as_lineno_2=$LINENO -+ test "x$as_lineno_1" != "x$as_lineno_2" && -+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { -+ -+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO -+ # uniformly replaced by the line number. The first 'sed' inserts a -+ # line-number line after each line using $LINENO; the second 'sed' -+ # does the real work. The second script uses 'N' to pair each -+ # line-number line with the line containing $LINENO, and appends -+ # trailing '-' during substitution so that $LINENO is not a special -+ # case at line end. -+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the -+ # scripts with optimization help from Paolo Bonzini. Blame Lee -+ # E. McMahon (1931-1989) for sed's syntax. :-) -+ sed -n ' -+ p -+ /[$]LINENO/= -+ ' <$as_myself | -+ sed ' -+ s/[$]LINENO.*/&-/ -+ t lineno -+ b -+ :lineno -+ N -+ :loop -+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ -+ t loop -+ s/-\n.*// -+ ' >$as_me.lineno && -+ chmod +x "$as_me.lineno" || -+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 -+ { (exit 1); exit 1; }; } -+ -+ # Don't try to exec as it changes $[0], causing all sort of problems -+ # (the dirname of $[0] is not the place where we might find the -+ # original and so on. Autoconf is especially sensitive to this). -+ . "./$as_me.lineno" -+ # Exit status is that of the last command. -+ exit -+} -+ -+ -+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then -+ as_dirname=dirname -+else -+ as_dirname=false -+fi -+ -+ECHO_C= ECHO_N= ECHO_T= -+case `echo -n x` in -+-n*) -+ case `echo 'x\c'` in -+ *c*) ECHO_T=' ';; # ECHO_T is single tab character. -+ *) ECHO_C='\c';; -+ esac;; -+*) -+ ECHO_N='-n';; -+esac -+ -+if expr a : '\(a\)' >/dev/null 2>&1 && -+ test "X`expr 00001 : '.*\(...\)'`" = X001; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+rm -f conf$$ conf$$.exe conf$$.file -+if test -d conf$$.dir; then -+ rm -f conf$$.dir/conf$$.file -+else -+ rm -f conf$$.dir -+ mkdir conf$$.dir -+fi -+echo >conf$$.file -+if ln -s conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s='ln -s' -+ # ... but there are two gotchas: -+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. -+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. -+ # In both cases, we have to default to `cp -p'. -+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || -+ as_ln_s='cp -p' -+elif ln conf$$.file conf$$ 2>/dev/null; then -+ as_ln_s=ln -+else -+ as_ln_s='cp -p' -+fi -+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -+rmdir conf$$.dir 2>/dev/null -+ -+if mkdir -p . 2>/dev/null; then -+ as_mkdir_p=: -+else -+ test -d ./-p && rmdir ./-p -+ as_mkdir_p=false -+fi -+ -+if test -x / >/dev/null 2>&1; then -+ as_test_x='test -x' -+else -+ if ls -dL / >/dev/null 2>&1; then -+ as_ls_L_option=L -+ else -+ as_ls_L_option= -+ fi -+ as_test_x=' -+ eval sh -c '\'' -+ if test -d "$1"; then -+ test -d "$1/."; -+ else -+ case $1 in -+ -*)set "./$1";; -+ esac; -+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in -+ ???[sx]*):;;*)false;;esac;fi -+ '\'' sh -+ ' -+fi -+as_executable_p=$as_test_x -+ -+# Sed expression to map a string onto a valid CPP name. -+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" -+ -+# Sed expression to map a string onto a valid variable name. -+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" -+ -+ -+exec 6>&1 -+ -+# Save the log message, to keep $[0] and so on meaningful, and to -+# report actual input values of CONFIG_FILES etc. instead of their -+# values after options handling. -+ac_log=" -+This file was extended by $as_me, which was -+generated by GNU Autoconf 2.61. Invocation command line was -+ -+ CONFIG_FILES = $CONFIG_FILES -+ CONFIG_HEADERS = $CONFIG_HEADERS -+ CONFIG_LINKS = $CONFIG_LINKS -+ CONFIG_COMMANDS = $CONFIG_COMMANDS -+ $ $0 $@ -+ -+on `(hostname || uname -n) 2>/dev/null | sed 1q` -+" -+ -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<_ACEOF -+# Files that config.status was made for. -+config_files="$ac_config_files" -+ -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+ac_cs_usage="\ -+\`$as_me' instantiates files from templates according to the -+current configuration. -+ -+Usage: $0 [OPTIONS] [FILE]... -+ -+ -h, --help print this help, then exit -+ -V, --version print version number and configuration settings, then exit -+ -q, --quiet do not print progress messages -+ -d, --debug don't remove temporary files -+ --recheck update $as_me by reconfiguring in the same conditions -+ --file=FILE[:TEMPLATE] -+ instantiate the configuration file FILE -+ -+Configuration files: -+$config_files -+ -+Report bugs to ." -+ -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF -+ac_cs_version="\\ -+config.status -+configured by $0, generated by GNU Autoconf 2.61, -+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" -+ -+Copyright (C) 2006 Free Software Foundation, Inc. -+This config.status script is free software; the Free Software Foundation -+gives unlimited permission to copy, distribute and modify it." -+ -+ac_pwd='$ac_pwd' -+srcdir='$srcdir' -+INSTALL='$INSTALL' -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+# If no file are specified by the user, then we need to provide default -+# value. By we need to know if files were specified by the user. -+ac_need_defaults=: -+while test $# != 0 -+do -+ case $1 in -+ --*=*) -+ ac_option=`expr "X$1" : 'X\([^=]*\)='` -+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` -+ ac_shift=: -+ ;; -+ *) -+ ac_option=$1 -+ ac_optarg=$2 -+ ac_shift=shift -+ ;; -+ esac -+ -+ case $ac_option in -+ # Handling of the options. -+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) -+ ac_cs_recheck=: ;; -+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) -+ echo "$ac_cs_version"; exit ;; -+ --debug | --debu | --deb | --de | --d | -d ) -+ debug=: ;; -+ --file | --fil | --fi | --f ) -+ $ac_shift -+ CONFIG_FILES="$CONFIG_FILES $ac_optarg" -+ ac_need_defaults=false;; -+ --he | --h | --help | --hel | -h ) -+ echo "$ac_cs_usage"; exit ;; -+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \ -+ | -silent | --silent | --silen | --sile | --sil | --si | --s) -+ ac_cs_silent=: ;; -+ -+ # This is an error. -+ -*) { echo "$as_me: error: unrecognized option: $1 -+Try \`$0 --help' for more information." >&2 -+ { (exit 1); exit 1; }; } ;; -+ -+ *) ac_config_targets="$ac_config_targets $1" -+ ac_need_defaults=false ;; -+ -+ esac -+ shift -+done -+ -+ac_configure_extra_args= -+ -+if $ac_cs_silent; then -+ exec 6>/dev/null -+ ac_configure_extra_args="$ac_configure_extra_args --silent" -+fi -+ -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF -+if \$ac_cs_recheck; then -+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 -+ CONFIG_SHELL=$SHELL -+ export CONFIG_SHELL -+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -+fi -+ -+_ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF -+exec 5>>config.log -+{ -+ echo -+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -+## Running $as_me. ## -+_ASBOX -+ echo "$ac_log" -+} >&5 -+ -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+ -+# Handling of arguments. -+for ac_config_target in $ac_config_targets -+do -+ case $ac_config_target in -+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; -+ -+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -+echo "$as_me: error: invalid argument: $ac_config_target" >&2;} -+ { (exit 1); exit 1; }; };; -+ esac -+done -+ -+ -+# If the user did not use the arguments to specify the items to instantiate, -+# then the envvar interface is used. Set only those that are not. -+# We use the long form for the default assignment because of an extremely -+# bizarre bug on SunOS 4.1.3. -+if $ac_need_defaults; then -+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files -+fi -+ -+# Have a temporary directory for convenience. Make it in the build tree -+# simply because there is no reason against having it here, and in addition, -+# creating and moving files from /tmp can sometimes cause problems. -+# Hook for its removal unless debugging. -+# Note that there is a small window in which the directory will not be cleaned: -+# after its creation but before its name has been assigned to `$tmp'. -+$debug || -+{ -+ tmp= -+ trap 'exit_status=$? -+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -+' 0 -+ trap '{ (exit 1); exit 1; }' 1 2 13 15 -+} -+# Create a (secure) tmp directory for tmp files. -+ -+{ -+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && -+ test -n "$tmp" && test -d "$tmp" -+} || -+{ -+ tmp=./conf$$-$RANDOM -+ (umask 077 && mkdir "$tmp") -+} || -+{ -+ echo "$me: cannot create a temporary directory in ." >&2 -+ { (exit 1); exit 1; } -+} -+ -+# -+# Set up the sed scripts for CONFIG_FILES section. -+# -+ -+# No need to generate the scripts if there are no CONFIG_FILES. -+# This happens for instance when ./config.status config.h -+if test -n "$CONFIG_FILES"; then -+ -+_ACEOF -+ -+ -+ -+ac_delim='%!_!# ' -+for ac_last_try in false false false false false :; do -+ cat >conf$$subs.sed <<_ACEOF -+SHELL!$SHELL$ac_delim -+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim -+PACKAGE_NAME!$PACKAGE_NAME$ac_delim -+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim -+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim -+PACKAGE_STRING!$PACKAGE_STRING$ac_delim -+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim -+exec_prefix!$exec_prefix$ac_delim -+prefix!$prefix$ac_delim -+program_transform_name!$program_transform_name$ac_delim -+bindir!$bindir$ac_delim -+sbindir!$sbindir$ac_delim -+libexecdir!$libexecdir$ac_delim -+datarootdir!$datarootdir$ac_delim -+datadir!$datadir$ac_delim -+sysconfdir!$sysconfdir$ac_delim -+sharedstatedir!$sharedstatedir$ac_delim -+localstatedir!$localstatedir$ac_delim -+includedir!$includedir$ac_delim -+oldincludedir!$oldincludedir$ac_delim -+docdir!$docdir$ac_delim -+infodir!$infodir$ac_delim -+htmldir!$htmldir$ac_delim -+dvidir!$dvidir$ac_delim -+pdfdir!$pdfdir$ac_delim -+psdir!$psdir$ac_delim -+libdir!$libdir$ac_delim -+localedir!$localedir$ac_delim -+mandir!$mandir$ac_delim -+DEFS!$DEFS$ac_delim -+ECHO_C!$ECHO_C$ac_delim -+ECHO_N!$ECHO_N$ac_delim -+ECHO_T!$ECHO_T$ac_delim -+LIBS!$LIBS$ac_delim -+build_alias!$build_alias$ac_delim -+host_alias!$host_alias$ac_delim -+target_alias!$target_alias$ac_delim -+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim -+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim -+INSTALL_DATA!$INSTALL_DATA$ac_delim -+build!$build$ac_delim -+build_cpu!$build_cpu$ac_delim -+build_vendor!$build_vendor$ac_delim -+build_os!$build_os$ac_delim -+host!$host$ac_delim -+host_cpu!$host_cpu$ac_delim -+host_vendor!$host_vendor$ac_delim -+host_os!$host_os$ac_delim -+target!$target$ac_delim -+target_cpu!$target_cpu$ac_delim -+target_vendor!$target_vendor$ac_delim -+target_os!$target_os$ac_delim -+target_noncanonical!$target_noncanonical$ac_delim -+LN_S!$LN_S$ac_delim -+x_ada_cflags!$x_ada_cflags$ac_delim -+default_gnattools_target!$default_gnattools_target$ac_delim -+TOOLS_TARGET_PAIRS!$TOOLS_TARGET_PAIRS$ac_delim -+LIBOBJS!$LIBOBJS$ac_delim -+LTLIBOBJS!$LTLIBOBJS$ac_delim -+_ACEOF -+ -+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 59; then -+ break -+ elif $ac_last_try; then -+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} -+ { (exit 1); exit 1; }; } -+ else -+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " -+ fi -+done -+ -+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` -+if test -n "$ac_eof"; then -+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` -+ ac_eof=`expr $ac_eof + 1` -+fi -+ -+cat >>$CONFIG_STATUS <<_ACEOF -+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof -+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end -+_ACEOF -+sed ' -+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g -+s/^/s,@/; s/!/@,|#_!!_#|/ -+:n -+t n -+s/'"$ac_delim"'$/,g/; t -+s/$/\\/; p -+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n -+' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF -+:end -+s/|#_!!_#|//g -+CEOF$ac_eof -+_ACEOF -+ -+ -+# VPATH may cause trouble with some makes, so we remove $(srcdir), -+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -+# trailing colons and then remove the whole line if VPATH becomes empty -+# (actually we leave an empty line to preserve line numbers). -+if test "x$srcdir" = x.; then -+ ac_vpsub='/^[ ]*VPATH[ ]*=/{ -+s/:*\$(srcdir):*/:/ -+s/:*\${srcdir}:*/:/ -+s/:*@srcdir@:*/:/ -+s/^\([^=]*=[ ]*\):*/\1/ -+s/:*$// -+s/^[^=]*=[ ]*$// -+}' -+fi -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+fi # test -n "$CONFIG_FILES" -+ -+ -+for ac_tag in :F $CONFIG_FILES -+do -+ case $ac_tag in -+ :[FHLC]) ac_mode=$ac_tag; continue;; -+ esac -+ case $ac_mode$ac_tag in -+ :[FHL]*:*);; -+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 -+echo "$as_me: error: Invalid tag $ac_tag." >&2;} -+ { (exit 1); exit 1; }; };; -+ :[FH]-) ac_tag=-:-;; -+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; -+ esac -+ ac_save_IFS=$IFS -+ IFS=: -+ set x $ac_tag -+ IFS=$ac_save_IFS -+ shift -+ ac_file=$1 -+ shift -+ -+ case $ac_mode in -+ :L) ac_source=$1;; -+ :[FH]) -+ ac_file_inputs= -+ for ac_f -+ do -+ case $ac_f in -+ -) ac_f="$tmp/stdin";; -+ *) # Look for the file first in the build tree, then in the source tree -+ # (if the path is not absolute). The absolute path cannot be DOS-style, -+ # because $ac_f cannot contain `:'. -+ test -f "$ac_f" || -+ case $ac_f in -+ [\\/$]*) false;; -+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; -+ esac || -+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -+echo "$as_me: error: cannot find input file: $ac_f" >&2;} -+ { (exit 1); exit 1; }; };; -+ esac -+ ac_file_inputs="$ac_file_inputs $ac_f" -+ done -+ -+ # Let's still pretend it is `configure' which instantiates (i.e., don't -+ # use $as_me), people would be surprised to read: -+ # /* config.h. Generated by config.status. */ -+ configure_input="Generated from "`IFS=: -+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." -+ if test x"$ac_file" != x-; then -+ configure_input="$ac_file. $configure_input" -+ { echo "$as_me:$LINENO: creating $ac_file" >&5 -+echo "$as_me: creating $ac_file" >&6;} -+ fi -+ -+ case $ac_tag in -+ *:-:* | *:-) cat >"$tmp/stdin";; -+ esac -+ ;; -+ esac -+ -+ ac_dir=`$as_dirname -- "$ac_file" || -+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$ac_file" : 'X\(//\)[^/]' \| \ -+ X"$ac_file" : 'X\(//\)$' \| \ -+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -+echo X"$ac_file" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ { as_dir="$ac_dir" -+ case $as_dir in #( -+ -*) as_dir=./$as_dir;; -+ esac -+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { -+ as_dirs= -+ while :; do -+ case $as_dir in #( -+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( -+ *) as_qdir=$as_dir;; -+ esac -+ as_dirs="'$as_qdir' $as_dirs" -+ as_dir=`$as_dirname -- "$as_dir" || -+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ -+ X"$as_dir" : 'X\(//\)[^/]' \| \ -+ X"$as_dir" : 'X\(//\)$' \| \ -+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -+echo X"$as_dir" | -+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)[^/].*/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\/\)$/{ -+ s//\1/ -+ q -+ } -+ /^X\(\/\).*/{ -+ s//\1/ -+ q -+ } -+ s/.*/./; q'` -+ test -d "$as_dir" && break -+ done -+ test -z "$as_dirs" || eval "mkdir $as_dirs" -+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -+echo "$as_me: error: cannot create directory $as_dir" >&2;} -+ { (exit 1); exit 1; }; }; } -+ ac_builddir=. -+ -+case "$ac_dir" in -+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -+*) -+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` -+ # A ".." for each directory in $ac_dir_suffix. -+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` -+ case $ac_top_builddir_sub in -+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; -+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; -+ esac ;; -+esac -+ac_abs_top_builddir=$ac_pwd -+ac_abs_builddir=$ac_pwd$ac_dir_suffix -+# for backward compatibility: -+ac_top_builddir=$ac_top_build_prefix -+ -+case $srcdir in -+ .) # We are building in place. -+ ac_srcdir=. -+ ac_top_srcdir=$ac_top_builddir_sub -+ ac_abs_top_srcdir=$ac_pwd ;; -+ [\\/]* | ?:[\\/]* ) # Absolute name. -+ ac_srcdir=$srcdir$ac_dir_suffix; -+ ac_top_srcdir=$srcdir -+ ac_abs_top_srcdir=$srcdir ;; -+ *) # Relative name. -+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix -+ ac_top_srcdir=$ac_top_build_prefix$srcdir -+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -+esac -+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix -+ -+ -+ case $ac_mode in -+ :F) -+ # -+ # CONFIG_FILE -+ # -+ -+ case $INSTALL in -+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; -+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; -+ esac -+_ACEOF -+ -+cat >>$CONFIG_STATUS <<\_ACEOF -+# If the template does not know about datarootdir, expand it. -+# FIXME: This hack should be removed a few years after 2.60. -+ac_datarootdir_hack=; ac_datarootdir_seen= -+ -+case `sed -n '/datarootdir/ { -+ p -+ q -+} -+/@datadir@/p -+/@docdir@/p -+/@infodir@/p -+/@localedir@/p -+/@mandir@/p -+' $ac_file_inputs` in -+*datarootdir*) ac_datarootdir_seen=yes;; -+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) -+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -+_ACEOF -+cat >>$CONFIG_STATUS <<_ACEOF -+ ac_datarootdir_hack=' -+ s&@datadir@&$datadir&g -+ s&@docdir@&$docdir&g -+ s&@infodir@&$infodir&g -+ s&@localedir@&$localedir&g -+ s&@mandir@&$mandir&g -+ s&\\\${datarootdir}&$datarootdir&g' ;; -+esac -+_ACEOF -+ -+# Neutralize VPATH when `$srcdir' = `.'. -+# Shell code in configure.ac might set extrasub. -+# FIXME: do we really want to maintain this feature? -+cat >>$CONFIG_STATUS <<_ACEOF -+ sed "$ac_vpsub -+$extrasub -+_ACEOF -+cat >>$CONFIG_STATUS <<\_ACEOF -+:t -+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -+s&@configure_input@&$configure_input&;t t -+s&@top_builddir@&$ac_top_builddir_sub&;t t -+s&@srcdir@&$ac_srcdir&;t t -+s&@abs_srcdir@&$ac_abs_srcdir&;t t -+s&@top_srcdir@&$ac_top_srcdir&;t t -+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -+s&@builddir@&$ac_builddir&;t t -+s&@abs_builddir@&$ac_abs_builddir&;t t -+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -+s&@INSTALL@&$ac_INSTALL&;t t -+$ac_datarootdir_hack -+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out -+ -+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && -+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && -+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && -+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' -+which seems to be undefined. Please make sure it is defined." >&5 -+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -+which seems to be undefined. Please make sure it is defined." >&2;} -+ -+ rm -f "$tmp/stdin" -+ case $ac_file in -+ -) cat "$tmp/out"; rm -f "$tmp/out";; -+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; -+ esac -+ ;; -+ -+ -+ -+ esac -+ -+done # for ac_tag -+ -+ -+{ (exit 0); exit 0; } -+_ACEOF -+chmod +x $CONFIG_STATUS -+ac_clean_files=$ac_clean_files_save -+ -+ -+# configure is writing to config.log, and then calls config.status. -+# config.status does its own redirection, appending to config.log. -+# Unfortunately, on DOS this fails, as config.log is still kept open -+# by configure, so config.status won't be able to write to it; its -+# output is simply discarded. So we exec the FD to /dev/null, -+# effectively closing config.log, so it can be properly (re)opened and -+# appended to by config.status. When coming back to configure, we -+# need to make the FD available again. -+if test "$no_create" != yes; then -+ ac_cs_success=: -+ ac_config_status_args= -+ test "$silent" = yes && -+ ac_config_status_args="$ac_config_status_args --quiet" -+ exec 5>/dev/null -+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false -+ exec 5>>config.log -+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which -+ # would make configure fail if this is the last instruction. -+ $ac_cs_success || { (exit 1); exit 1; } -+fi -+ -Index: libgnatprj/Makefile.in -=================================================================== ---- /dev/null -+++ libgnatprj/Makefile.in -@@ -0,0 +1,177 @@ -+# Makefile for libgnatprj. -+# Copyright (c) 2006 Ludovic Brenta -+# -+# This file is free software; you can redistribute it and/or modify -+# it under the terms of the GNU General Public License as published by -+# the Free Software Foundation; either version 2 of the License, or -+# (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -+ -+# Default target; must be first. -+all: libgnatprj -+ -+.SUFFIXES: -+ -+CPUS := $(shell getconf _NPROCESSORS_ONLN) -+LIB_VERSION := $(strip $(shell grep ' Library_Version :' \ -+ @srcdir@/../gcc/ada/gnatvsn.ads | \ -+ sed -e 's/.*"\(.*\)".*/\1/')) -+GCC:=../gcc/xgcc -B../gcc/ -+LIBGNAT_JUST_BUILT := -nostdinc -I../gcc/ada/rts -+LIBGNATVSN := -I../libgnatvsn -+CFLAGS := -g -O2 -+ADAFLAGS := -g -O2 -gnatn -+BASEVER := $(shell cat @srcdir@/../gcc/BASE-VER) -+DEVPHASE := $(shell cat @srcdir@/../gcc/DEV-PHASE) -+DATESTAMP := $(shell cat @srcdir@/../gcc/DATESTAMP) -+TOOLS_TARGET_PAIRS := @TOOLS_TARGET_PAIRS@ -+LN_S := @LN_S@ -+ -+ifneq (@build@,@host@) -+ CFLAGS += -b @host@ -+endif -+ -+.PHONY: libgnatprj install -+libgnatprj: libgnatprj.so.$(LIB_VERSION) libgnatprj.a -+ -+# Here we list one file per Ada unit: the body file if the unit has a -+# body, the spec file otherwise. -+PRJ_SOURCES := ali.adb ali-util.adb butil.adb binderr.adb errout.adb \ -+erroutc.adb errutil.adb err_vars.ads fname-uf.adb fmap.adb impunit.adb \ -+lib-util.adb makeutl.adb mlib.adb mlib-fil.adb mlib-tgt.adb \ -+mlib-tgt-specific.adb mlib-utl.adb osint.adb osint-c.adb prj.adb prj-attr.adb \ -+prj-attr-pm.adb prj-com.ads prj-dect.adb prj-env.adb prj-err.adb prj-ext.adb \ -+prj-nmsc.adb prj-pars.adb prj-part.adb prj-pp.adb prj-proc.adb prj-strt.adb \ -+prj-tree.adb prj-util.adb rident.ads scng.adb sfn_scan.adb sinfo-cn.adb \ -+sinput-c.adb sinput-p.adb style.ads styleg.adb styleg-c.adb stylesw.adb \ -+switch.adb switch-m.adb targparm.adb tempdir.adb -+ -+# Source files generated in build/gcc/ada, not src/gcc/ada. -+GENERATED_SOURCES := sdefault.adb -+ -+SOURCES := $(PRJ_SOURCES) $(GENERATED_SOURCES) -+ -+OBJECTS := $(patsubst %.ads,%.o,$(SOURCES:.adb=.o)) -+ -+# Add some object files compiled from C sources. prefix.o requires -+# some objects from libiberty. -+OBJECTS += concat.o link.o prefix.o xexit.o xmalloc.o xstrdup.o -+ -+vpath %.c @srcdir@/../gcc/ada -+ -+libgnatprj.so.$(LIB_VERSION): $(addprefix obj-shared/,$(OBJECTS)) -+ : # Make libgnatprj.so -+ $(GCC) -o $@ -shared -fPIC -Wl,--soname,$@ $^ \ -+ -L../gcc/ada/rts -lgnat-$(LIB_VERSION) \ -+ -L../libgnatvsn -lgnatvsn -+ $(LN_S) -f libgnatprj.so.$(LIB_VERSION) libgnatprj.so -+ chmod a=r obj-shared/*.ali -+# Make the .ali files, but not the .o files, visible to the gnat tools. -+ cp -lp obj-shared/*.ali . -+ -+$(addprefix obj-shared/,$(OBJECTS)): | stamp-libgnatprj-sources obj-shared -+ -+obj-shared/%.o: %.adb -+ $(GCC) -c -fPIC $(ADAFLAGS) $(LIBGNAT_JUST_BUILT) $(LIBGNATVSN) $< -o $@ -+ -+obj-shared/%.o: %.ads -+ $(GCC) -c -fPIC $(ADAFLAGS) $(LIBGNAT_JUST_BUILT) $(LIBGNATVSN) $< -o $@ -+ -+obj-shared/%.o: %.c -+ $(GCC) -c -fPIC $(CFLAGS) -I@srcdir@/../gcc $< -o $@ -+ -+obj-shared/prefix.o: @srcdir@/../gcc/prefix.c -+ $(GCC) -c -fPIC $(CFLAGS) -DPREFIX=\"@prefix@\" -DBASEVER=\"$(BASEVER)\" \ -+ -I@srcdir@/../gcc -I@srcdir@/../include -I../gcc -I../libiberty \ -+ $< -o $@ -+ -+obj-shared/%.o: @srcdir@/../libiberty/%.c -+ $(GCC) -c -fPIC $(CFLAGS) \ -+ -I@srcdir@/../libiberty -I@srcdir@/../include $< -o $@ -+ -+obj-shared: -+ -mkdir $@ -+ -+libgnatprj.a: $(addprefix obj-static/,$(OBJECTS)) -+ : # Make libgnatprj.a -+ ar rc $@ $^ -+ ranlib $@ -+ -+$(addprefix obj-static/,$(OBJECTS)): | stamp-libgnatprj-sources obj-static -+ -+obj-static/%.o: %.adb -+ $(GCC) -c $(ADAFLAGS) $(LIBGNAT_JUST_BUILT) $(LIBGNATVSN) $< -o $@ -+ -+obj-static/%.o: %.ads -+ $(GCC) -c $(ADAFLAGS) $(LIBGNAT_JUST_BUILT) $(LIBGNATVSN) $< -o $@ -+ -+obj-static/%.o: %.c -+ $(GCC) -c $(CFLAGS) -I@srcdir@/../gcc $< -o $@ -+ -+obj-static/prefix.o: @srcdir@/../gcc/prefix.c -+ $(GCC) -c $(CFLAGS) -DPREFIX=\"@prefix@\" -DBASEVER=\"$(BASEVER)\" \ -+ -I@srcdir@/../gcc -I@srcdir@/../include -I../gcc -I../libiberty \ -+ $< -o $@ -+ -+obj-static/%.o: @srcdir@/../libiberty/%.c -+ $(GCC) -c -fPIC $(CFLAGS) \ -+ -I@srcdir@/../libiberty -I@srcdir@/../include $< -o $@ -+ -+obj-static: -+ -mkdir $@ -+ -+$(SOURCES): stamp-libgnatprj-sources -+ -+stamp-libgnatprj-sources: -+ for file in $(PRJ_SOURCES); do \ -+ ads=$$(echo $$file | sed 's/\.adb/.ads/'); \ -+ if [ -f @srcdir@/../gcc/ada/$$file -a ! -L $$file ] ; then $(LN_S) @srcdir@/../gcc/ada/$$file .; fi; \ -+ if [ -f @srcdir@/../gcc/ada/$$ads -a ! -L $$ads ] ; then $(LN_S) @srcdir@/../gcc/ada/$$ads .; fi; \ -+ done -+ for file in $(GENERATED_SOURCES); do \ -+ ads=$$(echo $$file | sed 's/\.adb/.ads/'); \ -+ if [ -f ../gcc/ada/$$file -a ! -L $$file ] ; then $(LN_S) ../gcc/ada/$$file .; fi; \ -+ if [ -f ../gcc/ada/$$ads -a ! -L $$ads ] ; then $(LN_S) ../gcc/ada/$$ads .; \ -+ else \ -+ if [ -f @srcdir@/../gcc/ada/$$ads -a ! -L $$ads ] ; then $(LN_S) @srcdir@/../gcc/ada/$$ads .; fi; \ -+ fi; \ -+ done -+ $(foreach PAIR,$(TOOLS_TARGET_PAIRS), \ -+ rm -f $(word 1,$(subst <, ,$(PAIR)));\ -+ $(LN_S) @srcdir@/../gcc/ada/$(word 2,$(subst <, ,$(PAIR))) \ -+ $(word 1,$(subst <, ,$(PAIR)));) -+ touch $@ -+ -+# Generate a list of source files (.ads and .adb) to install. Almost -+# all of them are in src/gcc/ada, but some are generated during build -+# and are in build/gcc/ada. -+BODIES := $(filter %.adb,$(PRJ_SOURCES)) -+SPECS := $(filter %.ads,$(PRJ_SOURCES)) $(patsubst %.adb,%.ads,$(BODIES)) -+SOURCES_TO_INSTALL := \ -+$(addprefix @srcdir@/../gcc/ada/,$(SPECS) $(BODIES)) \ -+$(addprefix ../gcc/ada/,$(GENERATED_SOURCES)) -+ -+install: libgnatprj -+ $(INSTALL_DATA) libgnatprj.a $(DESTDIR)$(prefix)/lib -+ $(INSTALL_DATA) libgnatprj.so.$(LIB_VERSION) $(DESTDIR)$(prefix)/lib -+ cd $(DESTDIR)$(prefix)/lib; \ -+ ln -sf libgnatprj.so.$(LIB_VERSION) libgnatprj.so -+ mkdir -p $(DESTDIR)$(prefix)/share/ada/adainclude/gnatprj -+ $(INSTALL_DATA) $(SOURCES_TO_INSTALL) \ -+ $(DESTDIR)$(prefix)/share/ada/adainclude/gnatprj -+ mkdir -p $(DESTDIR)$(prefix)/lib/ada/adalib/gnatprj -+ $(INSTALL) -m 0444 obj-shared/*.ali \ -+ $(DESTDIR)$(prefix)/lib/ada/adalib/gnatprj -+ chmod a=r $(DESTDIR)$(prefix)/lib/ada/adalib/gnatprj/*.ali -+ -+.PHONY: clean -+clean: -+ rm -rf *.ali obj-static obj-shared libgnatprj* *.adb *.ads stamp* -Index: Makefile.def -=================================================================== ---- Makefile.def.orig -+++ Makefile.def -@@ -130,6 +130,13 @@ - missing= TAGS; - missing= install-info; - missing= installcheck; }; -+host_modules= { module= libgnatprj; no_check=true; -+ missing= info; -+ missing= dvi; -+ missing= html; -+ missing= TAGS; -+ missing= install-info; -+ missing= installcheck; }; - host_modules= { module= gnattools; no_check=true; - missing= info; - missing= dvi; -@@ -175,6 +182,13 @@ - missing= TAGS; - missing= install-info; - missing= installcheck; }; -+target_modules = { module= libgnatprj; no_check=true; -+ missing= info; -+ missing= dvi; -+ missing= html; -+ missing= TAGS; -+ missing= install-info; -+ missing= installcheck; }; - target_modules = { module= libgomp; lib_path=.libs; }; - - // These are (some of) the make targets to be done in each subdirectory. -@@ -346,7 +360,10 @@ - - dependencies = { module=all-gnattools; on=all-libada; }; - dependencies = { module=all-gnattools; on=all-libgnatvsn; }; -+dependencies = { module=all-gnattools; on=all-libgnatprj; }; - dependencies = { module=all-libgnatvsn; on=all-libada; }; -+dependencies = { module=all-libgnatprj; on=all-libada; }; -+dependencies = { module=all-libgnatprj; on=all-libgnatvsn; }; - - dependencies = { module=configure-mpfr; on=all-gmp; }; - -Index: Makefile.in -=================================================================== ---- Makefile.in.orig -+++ Makefile.in -@@ -699,6 +699,7 @@ - maybe-configure-utils \ - maybe-configure-libada \ - maybe-configure-libgnatvsn \ -+ maybe-configure-libgnatprj \ - maybe-configure-gnattools - .PHONY: configure-target - configure-target: \ -@@ -723,6 +724,7 @@ - maybe-configure-target-rda \ - maybe-configure-target-libada \ - maybe-configure-target-libgnatvsn \ -+ maybe-configure-target-libgnatprj \ - maybe-configure-target-libgomp - - # The target built for a native non-bootstrap build. -@@ -852,6 +854,7 @@ - all-host: maybe-all-utils - all-host: maybe-all-libada - all-host: maybe-all-libgnatvsn -+all-host: maybe-all-libgnatprj - all-host: maybe-all-gnattools - - .PHONY: all-target -@@ -879,6 +882,7 @@ - all-target: maybe-all-target-rda - all-target: maybe-all-target-libada - all-target: maybe-all-target-libgnatvsn -+all-target: maybe-all-target-libgnatprj - all-target: maybe-all-target-libgomp - - # Do a target for all the subdirectories. A ``make do-X'' will do a -@@ -968,6 +972,7 @@ - info-host: maybe-info-utils - info-host: maybe-info-libada - info-host: maybe-info-libgnatvsn -+info-host: maybe-info-libgnatprj - info-host: maybe-info-gnattools - - .PHONY: info-target -@@ -993,6 +998,7 @@ - info-target: maybe-info-target-rda - info-target: maybe-info-target-libada - info-target: maybe-info-target-libgnatvsn -+info-target: maybe-info-target-libgnatprj - info-target: maybe-info-target-libgomp - - .PHONY: do-dvi -@@ -1077,6 +1083,7 @@ - dvi-host: maybe-dvi-utils - dvi-host: maybe-dvi-libada - dvi-host: maybe-dvi-libgnatvsn -+dvi-host: maybe-dvi-libgnatprj - dvi-host: maybe-dvi-gnattools - - .PHONY: dvi-target -@@ -1102,6 +1109,7 @@ - dvi-target: maybe-dvi-target-rda - dvi-target: maybe-dvi-target-libada - dvi-target: maybe-dvi-target-libgnatvsn -+dvi-target: maybe-dvi-target-libgnatprj - dvi-target: maybe-dvi-target-libgomp - - .PHONY: do-pdf -@@ -1186,6 +1194,7 @@ - pdf-host: maybe-pdf-utils - pdf-host: maybe-pdf-libada - pdf-host: maybe-pdf-libgnatvsn -+pdf-host: maybe-pdf-libgnatprj - pdf-host: maybe-pdf-gnattools - - .PHONY: pdf-target -@@ -1211,6 +1220,7 @@ - pdf-target: maybe-pdf-target-rda - pdf-target: maybe-pdf-target-libada - pdf-target: maybe-pdf-target-libgnatvsn -+pdf-target: maybe-pdf-target-libgnatprj - pdf-target: maybe-pdf-target-libgomp - - .PHONY: do-html -@@ -1295,6 +1305,7 @@ - html-host: maybe-html-utils - html-host: maybe-html-libada - html-host: maybe-html-libgnatvsn -+html-host: maybe-html-libgnatprj - html-host: maybe-html-gnattools - - .PHONY: html-target -@@ -1320,6 +1331,7 @@ - html-target: maybe-html-target-rda - html-target: maybe-html-target-libada - html-target: maybe-html-target-libgnatvsn -+html-target: maybe-html-target-libgnatprj - html-target: maybe-html-target-libgomp - - .PHONY: do-TAGS -@@ -1404,6 +1416,7 @@ - TAGS-host: maybe-TAGS-utils - TAGS-host: maybe-TAGS-libada - TAGS-host: maybe-TAGS-libgnatvsn -+TAGS-host: maybe-TAGS-libgnatprj - TAGS-host: maybe-TAGS-gnattools - - .PHONY: TAGS-target -@@ -1429,6 +1442,7 @@ - TAGS-target: maybe-TAGS-target-rda - TAGS-target: maybe-TAGS-target-libada - TAGS-target: maybe-TAGS-target-libgnatvsn -+TAGS-target: maybe-TAGS-target-libgnatprj - TAGS-target: maybe-TAGS-target-libgomp - - .PHONY: do-install-info -@@ -1513,6 +1527,7 @@ - install-info-host: maybe-install-info-utils - install-info-host: maybe-install-info-libada - install-info-host: maybe-install-info-libgnatvsn -+install-info-host: maybe-install-info-libgnatprj - install-info-host: maybe-install-info-gnattools - - .PHONY: install-info-target -@@ -1538,6 +1553,7 @@ - install-info-target: maybe-install-info-target-rda - install-info-target: maybe-install-info-target-libada - install-info-target: maybe-install-info-target-libgnatvsn -+install-info-target: maybe-install-info-target-libgnatprj - install-info-target: maybe-install-info-target-libgomp - - .PHONY: do-install-pdf -@@ -1622,6 +1638,7 @@ - install-pdf-host: maybe-install-pdf-utils - install-pdf-host: maybe-install-pdf-libada - install-pdf-host: maybe-install-pdf-libgnatvsn -+install-pdf-host: maybe-install-pdf-libgnatprj - install-pdf-host: maybe-install-pdf-gnattools - - .PHONY: install-pdf-target -@@ -1647,6 +1664,7 @@ - install-pdf-target: maybe-install-pdf-target-rda - install-pdf-target: maybe-install-pdf-target-libada - install-pdf-target: maybe-install-pdf-target-libgnatvsn -+install-pdf-target: maybe-install-pdf-target-libgnatprj - install-pdf-target: maybe-install-pdf-target-libgomp - - .PHONY: do-install-html -@@ -1731,6 +1749,7 @@ - install-html-host: maybe-install-html-utils - install-html-host: maybe-install-html-libada - install-html-host: maybe-install-html-libgnatvsn -+install-html-host: maybe-install-html-libgnatprj - install-html-host: maybe-install-html-gnattools - - .PHONY: install-html-target -@@ -1756,6 +1775,7 @@ - install-html-target: maybe-install-html-target-rda - install-html-target: maybe-install-html-target-libada - install-html-target: maybe-install-html-target-libgnatvsn -+install-html-target: maybe-install-html-target-libgnatprj - install-html-target: maybe-install-html-target-libgomp - - .PHONY: do-installcheck -@@ -1840,6 +1860,7 @@ - installcheck-host: maybe-installcheck-utils - installcheck-host: maybe-installcheck-libada - installcheck-host: maybe-installcheck-libgnatvsn -+installcheck-host: maybe-installcheck-libgnatprj - installcheck-host: maybe-installcheck-gnattools - - .PHONY: installcheck-target -@@ -1865,6 +1886,7 @@ - installcheck-target: maybe-installcheck-target-rda - installcheck-target: maybe-installcheck-target-libada - installcheck-target: maybe-installcheck-target-libgnatvsn -+installcheck-target: maybe-installcheck-target-libgnatprj - installcheck-target: maybe-installcheck-target-libgomp - - .PHONY: do-mostlyclean -@@ -1949,6 +1971,7 @@ - mostlyclean-host: maybe-mostlyclean-utils - mostlyclean-host: maybe-mostlyclean-libada - mostlyclean-host: maybe-mostlyclean-libgnatvsn -+mostlyclean-host: maybe-mostlyclean-libgnatprj - mostlyclean-host: maybe-mostlyclean-gnattools - - .PHONY: mostlyclean-target -@@ -1974,6 +1997,7 @@ - mostlyclean-target: maybe-mostlyclean-target-rda - mostlyclean-target: maybe-mostlyclean-target-libada - mostlyclean-target: maybe-mostlyclean-target-libgnatvsn -+mostlyclean-target: maybe-mostlyclean-target-libgnatprj - mostlyclean-target: maybe-mostlyclean-target-libgomp - - .PHONY: do-clean -@@ -2058,6 +2082,7 @@ - clean-host: maybe-clean-utils - clean-host: maybe-clean-libada - clean-host: maybe-clean-libgnatvsn -+clean-host: maybe-clean-libgnatprj - clean-host: maybe-clean-gnattools - - .PHONY: clean-target -@@ -2083,6 +2108,7 @@ - clean-target: maybe-clean-target-rda - clean-target: maybe-clean-target-libada - clean-target: maybe-clean-target-libgnatvsn -+clean-target: maybe-clean-target-libgnatprj - clean-target: maybe-clean-target-libgomp - - .PHONY: do-distclean -@@ -2167,6 +2193,7 @@ - distclean-host: maybe-distclean-utils - distclean-host: maybe-distclean-libada - distclean-host: maybe-distclean-libgnatvsn -+distclean-host: maybe-distclean-libgnatprj - distclean-host: maybe-distclean-gnattools - - .PHONY: distclean-target -@@ -2192,6 +2219,7 @@ - distclean-target: maybe-distclean-target-rda - distclean-target: maybe-distclean-target-libada - distclean-target: maybe-distclean-target-libgnatvsn -+distclean-target: maybe-distclean-target-libgnatprj - distclean-target: maybe-distclean-target-libgomp - - .PHONY: do-maintainer-clean -@@ -2276,6 +2304,7 @@ - maintainer-clean-host: maybe-maintainer-clean-utils - maintainer-clean-host: maybe-maintainer-clean-libada - maintainer-clean-host: maybe-maintainer-clean-libgnatvsn -+maintainer-clean-host: maybe-maintainer-clean-libgnatprj - maintainer-clean-host: maybe-maintainer-clean-gnattools - - .PHONY: maintainer-clean-target -@@ -2301,6 +2330,7 @@ - maintainer-clean-target: maybe-maintainer-clean-target-rda - maintainer-clean-target: maybe-maintainer-clean-target-libada - maintainer-clean-target: maybe-maintainer-clean-target-libgnatvsn -+maintainer-clean-target: maybe-maintainer-clean-target-libgnatprj - maintainer-clean-target: maybe-maintainer-clean-target-libgomp - - -@@ -2439,6 +2469,7 @@ - maybe-check-utils \ - maybe-check-libada \ - maybe-check-libgnatvsn \ -+ maybe-check-libgnatprj \ - maybe-check-gnattools - - .PHONY: check-target -@@ -2464,6 +2495,7 @@ - maybe-check-target-rda \ - maybe-check-target-libada \ - maybe-check-target-libgnatvsn \ -+ maybe-check-target-libgnatprj \ - maybe-check-target-libgomp - - do-check: -@@ -2574,6 +2606,7 @@ - maybe-install-utils \ - maybe-install-libada \ - maybe-install-libgnatvsn \ -+ maybe-install-libgnatprj \ - maybe-install-gnattools - - .PHONY: install-host -@@ -2649,6 +2682,7 @@ - maybe-install-utils \ - maybe-install-libada \ - maybe-install-libgnatvsn \ -+ maybe-install-libgnatprj \ - maybe-install-gnattools - - .PHONY: install-target -@@ -2674,6 +2708,7 @@ - maybe-install-target-rda \ - maybe-install-target-libada \ - maybe-install-target-libgnatvsn \ -+ maybe-install-target-libgnatprj \ - maybe-install-target-libgomp - - uninstall: -@@ -39562,6 +39597,327 @@ - - - -+.PHONY: configure-libgnatprj maybe-configure-libgnatprj -+maybe-configure-libgnatprj: -+@if gcc-bootstrap -+configure-libgnatprj: stage_current -+@endif gcc-bootstrap -+@if libgnatprj -+maybe-configure-libgnatprj: configure-libgnatprj -+configure-libgnatprj: -+ @: $(MAKE); $(unstage) -+ @r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ test ! -f $(HOST_SUBDIR)/libgnatprj/Makefile || exit 0; \ -+ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgnatprj ; \ -+ $(HOST_EXPORTS) \ -+ echo Configuring in $(HOST_SUBDIR)/libgnatprj; \ -+ cd "$(HOST_SUBDIR)/libgnatprj" || exit 1; \ -+ case $(srcdir) in \ -+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \ -+ *) topdir=`echo $(HOST_SUBDIR)/libgnatprj/ | \ -+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \ -+ esac; \ -+ srcdiroption="--srcdir=$${topdir}/libgnatprj"; \ -+ libsrcdir="$$s/libgnatprj"; \ -+ $(SHELL) $${libsrcdir}/configure \ -+ $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \ -+ --target=${target_alias} $${srcdiroption} \ -+ || exit 1 -+@endif libgnatprj -+ -+ -+ -+ -+ -+.PHONY: all-libgnatprj maybe-all-libgnatprj -+maybe-all-libgnatprj: -+@if gcc-bootstrap -+all-libgnatprj: stage_current -+@endif gcc-bootstrap -+@if libgnatprj -+TARGET-libgnatprj=all -+maybe-all-libgnatprj: all-libgnatprj -+all-libgnatprj: configure-libgnatprj -+ @: $(MAKE); $(unstage) -+ @r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(HOST_EXPORTS) \ -+ (cd $(HOST_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(FLAGS_TO_PASS) $(TARGET-libgnatprj)) -+@endif libgnatprj -+ -+ -+ -+ -+.PHONY: check-libgnatprj maybe-check-libgnatprj -+maybe-check-libgnatprj: -+@if libgnatprj -+maybe-check-libgnatprj: check-libgnatprj -+ -+check-libgnatprj: -+ -+@endif libgnatprj -+ -+.PHONY: install-libgnatprj maybe-install-libgnatprj -+maybe-install-libgnatprj: -+@if libgnatprj -+maybe-install-libgnatprj: install-libgnatprj -+ -+install-libgnatprj: installdirs -+ @: $(MAKE); $(unstage) -+ @r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(HOST_EXPORTS) \ -+ (cd $(HOST_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(FLAGS_TO_PASS) install) -+ -+@endif libgnatprj -+ -+# Other targets (info, dvi, pdf, etc.) -+ -+.PHONY: maybe-info-libgnatprj info-libgnatprj -+maybe-info-libgnatprj: -+@if libgnatprj -+maybe-info-libgnatprj: info-libgnatprj -+ -+# libgnatprj doesn't support info. -+info-libgnatprj: -+ -+@endif libgnatprj -+ -+.PHONY: maybe-dvi-libgnatprj dvi-libgnatprj -+maybe-dvi-libgnatprj: -+@if libgnatprj -+maybe-dvi-libgnatprj: dvi-libgnatprj -+ -+# libgnatprj doesn't support dvi. -+dvi-libgnatprj: -+ -+@endif libgnatprj -+ -+.PHONY: maybe-pdf-libgnatprj pdf-libgnatprj -+maybe-pdf-libgnatprj: -+@if libgnatprj -+maybe-pdf-libgnatprj: pdf-libgnatprj -+ -+pdf-libgnatprj: \ -+ configure-libgnatprj -+ @: $(MAKE); $(unstage) -+ @[ -f ./libgnatprj/Makefile ] || exit 0; \ -+ r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(HOST_EXPORTS) \ -+ for flag in $(EXTRA_HOST_FLAGS) ; do \ -+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ -+ done; \ -+ echo "Doing pdf in libgnatprj" ; \ -+ (cd $(HOST_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ -+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ -+ "RANLIB=$${RANLIB}" \ -+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ -+ pdf) \ -+ || exit 1 -+ -+@endif libgnatprj -+ -+.PHONY: maybe-html-libgnatprj html-libgnatprj -+maybe-html-libgnatprj: -+@if libgnatprj -+maybe-html-libgnatprj: html-libgnatprj -+ -+# libgnatprj doesn't support html. -+html-libgnatprj: -+ -+@endif libgnatprj -+ -+.PHONY: maybe-TAGS-libgnatprj TAGS-libgnatprj -+maybe-TAGS-libgnatprj: -+@if libgnatprj -+maybe-TAGS-libgnatprj: TAGS-libgnatprj -+ -+# libgnatprj doesn't support TAGS. -+TAGS-libgnatprj: -+ -+@endif libgnatprj -+ -+.PHONY: maybe-install-info-libgnatprj install-info-libgnatprj -+maybe-install-info-libgnatprj: -+@if libgnatprj -+maybe-install-info-libgnatprj: install-info-libgnatprj -+ -+# libgnatprj doesn't support install-info. -+install-info-libgnatprj: -+ -+@endif libgnatprj -+ -+.PHONY: maybe-install-pdf-libgnatprj install-pdf-libgnatprj -+maybe-install-pdf-libgnatprj: -+@if libgnatprj -+maybe-install-pdf-libgnatprj: install-pdf-libgnatprj -+ -+install-pdf-libgnatprj: \ -+ configure-libgnatprj \ -+ pdf-libgnatprj -+ @: $(MAKE); $(unstage) -+ @[ -f ./libgnatprj/Makefile ] || exit 0; \ -+ r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(HOST_EXPORTS) \ -+ for flag in $(EXTRA_HOST_FLAGS) ; do \ -+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ -+ done; \ -+ echo "Doing install-pdf in libgnatprj" ; \ -+ (cd $(HOST_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ -+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ -+ "RANLIB=$${RANLIB}" \ -+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ -+ install-pdf) \ -+ || exit 1 -+ -+@endif libgnatprj -+ -+.PHONY: maybe-install-html-libgnatprj install-html-libgnatprj -+maybe-install-html-libgnatprj: -+@if libgnatprj -+maybe-install-html-libgnatprj: install-html-libgnatprj -+ -+install-html-libgnatprj: \ -+ configure-libgnatprj \ -+ html-libgnatprj -+ @: $(MAKE); $(unstage) -+ @[ -f ./libgnatprj/Makefile ] || exit 0; \ -+ r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(HOST_EXPORTS) \ -+ for flag in $(EXTRA_HOST_FLAGS) ; do \ -+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ -+ done; \ -+ echo "Doing install-html in libgnatprj" ; \ -+ (cd $(HOST_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ -+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ -+ "RANLIB=$${RANLIB}" \ -+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ -+ install-html) \ -+ || exit 1 -+ -+@endif libgnatprj -+ -+.PHONY: maybe-installcheck-libgnatprj installcheck-libgnatprj -+maybe-installcheck-libgnatprj: -+@if libgnatprj -+maybe-installcheck-libgnatprj: installcheck-libgnatprj -+ -+# libgnatprj doesn't support installcheck. -+installcheck-libgnatprj: -+ -+@endif libgnatprj -+ -+.PHONY: maybe-mostlyclean-libgnatprj mostlyclean-libgnatprj -+maybe-mostlyclean-libgnatprj: -+@if libgnatprj -+maybe-mostlyclean-libgnatprj: mostlyclean-libgnatprj -+ -+mostlyclean-libgnatprj: -+ @: $(MAKE); $(unstage) -+ @[ -f ./libgnatprj/Makefile ] || exit 0; \ -+ r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(HOST_EXPORTS) \ -+ for flag in $(EXTRA_HOST_FLAGS) ; do \ -+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ -+ done; \ -+ echo "Doing mostlyclean in libgnatprj" ; \ -+ (cd $(HOST_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ -+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ -+ "RANLIB=$${RANLIB}" \ -+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ -+ mostlyclean) \ -+ || exit 1 -+ -+@endif libgnatprj -+ -+.PHONY: maybe-clean-libgnatprj clean-libgnatprj -+maybe-clean-libgnatprj: -+@if libgnatprj -+maybe-clean-libgnatprj: clean-libgnatprj -+ -+clean-libgnatprj: -+ @: $(MAKE); $(unstage) -+ @[ -f ./libgnatprj/Makefile ] || exit 0; \ -+ r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(HOST_EXPORTS) \ -+ for flag in $(EXTRA_HOST_FLAGS) ; do \ -+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ -+ done; \ -+ echo "Doing clean in libgnatprj" ; \ -+ (cd $(HOST_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ -+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ -+ "RANLIB=$${RANLIB}" \ -+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ -+ clean) \ -+ || exit 1 -+ -+@endif libgnatprj -+ -+.PHONY: maybe-distclean-libgnatprj distclean-libgnatprj -+maybe-distclean-libgnatprj: -+@if libgnatprj -+maybe-distclean-libgnatprj: distclean-libgnatprj -+ -+distclean-libgnatprj: -+ @: $(MAKE); $(unstage) -+ @[ -f ./libgnatprj/Makefile ] || exit 0; \ -+ r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(HOST_EXPORTS) \ -+ for flag in $(EXTRA_HOST_FLAGS) ; do \ -+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ -+ done; \ -+ echo "Doing distclean in libgnatprj" ; \ -+ (cd $(HOST_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ -+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ -+ "RANLIB=$${RANLIB}" \ -+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ -+ distclean) \ -+ || exit 1 -+ -+@endif libgnatprj -+ -+.PHONY: maybe-maintainer-clean-libgnatprj maintainer-clean-libgnatprj -+maybe-maintainer-clean-libgnatprj: -+@if libgnatprj -+maybe-maintainer-clean-libgnatprj: maintainer-clean-libgnatprj -+ -+maintainer-clean-libgnatprj: -+ @: $(MAKE); $(unstage) -+ @[ -f ./libgnatprj/Makefile ] || exit 0; \ -+ r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(HOST_EXPORTS) \ -+ for flag in $(EXTRA_HOST_FLAGS) ; do \ -+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ -+ done; \ -+ echo "Doing maintainer-clean in libgnatprj" ; \ -+ (cd $(HOST_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ -+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ -+ "RANLIB=$${RANLIB}" \ -+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ -+ maintainer-clean) \ -+ || exit 1 -+ -+@endif libgnatprj -+ -+ -+ - .PHONY: configure-gnattools maybe-configure-gnattools - maybe-configure-gnattools: - @if gcc-bootstrap -@@ -49480,6 +49836,345 @@ - - - -+.PHONY: configure-target-libgnatprj maybe-configure-target-libgnatprj -+maybe-configure-target-libgnatprj: -+@if gcc-bootstrap -+configure-target-libgnatprj: stage_current -+@endif gcc-bootstrap -+@if target-libgnatprj -+maybe-configure-target-libgnatprj: configure-target-libgnatprj -+configure-target-libgnatprj: -+ @: $(MAKE); $(unstage) -+ @r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ echo "Checking multilib configuration for libgnatprj..."; \ -+ $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libgnatprj ; \ -+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libgnatprj/multilib.tmp 2> /dev/null ; \ -+ if test -r $(TARGET_SUBDIR)/libgnatprj/multilib.out; then \ -+ if cmp -s $(TARGET_SUBDIR)/libgnatprj/multilib.tmp $(TARGET_SUBDIR)/libgnatprj/multilib.out; then \ -+ rm -f $(TARGET_SUBDIR)/libgnatprj/multilib.tmp; \ -+ else \ -+ rm -f $(TARGET_SUBDIR)/libgnatprj/Makefile; \ -+ mv $(TARGET_SUBDIR)/libgnatprj/multilib.tmp $(TARGET_SUBDIR)/libgnatprj/multilib.out; \ -+ fi; \ -+ else \ -+ mv $(TARGET_SUBDIR)/libgnatprj/multilib.tmp $(TARGET_SUBDIR)/libgnatprj/multilib.out; \ -+ fi; \ -+ test ! -f $(TARGET_SUBDIR)/libgnatprj/Makefile || exit 0; \ -+ $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libgnatprj ; \ -+ $(NORMAL_TARGET_EXPORTS) \ -+ echo Configuring in $(TARGET_SUBDIR)/libgnatprj; \ -+ cd "$(TARGET_SUBDIR)/libgnatprj" || exit 1; \ -+ case $(srcdir) in \ -+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \ -+ *) topdir=`echo $(TARGET_SUBDIR)/libgnatprj/ | \ -+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \ -+ esac; \ -+ srcdiroption="--srcdir=$${topdir}/libgnatprj"; \ -+ libsrcdir="$$s/libgnatprj"; \ -+ rm -f no-such-file || : ; \ -+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ -+ $(TARGET_CONFIGARGS) --build=${build_alias} --host=${target_alias} \ -+ --target=${target_alias} $${srcdiroption} \ -+ || exit 1 -+@endif target-libgnatprj -+ -+ -+ -+ -+ -+.PHONY: all-target-libgnatprj maybe-all-target-libgnatprj -+maybe-all-target-libgnatprj: -+@if gcc-bootstrap -+all-target-libgnatprj: stage_current -+@endif gcc-bootstrap -+@if target-libgnatprj -+TARGET-target-libgnatprj=all -+maybe-all-target-libgnatprj: all-target-libgnatprj -+all-target-libgnatprj: configure-target-libgnatprj -+ @: $(MAKE); $(unstage) -+ @r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(NORMAL_TARGET_EXPORTS) \ -+ (cd $(TARGET_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(TARGET_FLAGS_TO_PASS) $(TARGET-target-libgnatprj)) -+@endif target-libgnatprj -+ -+ -+ -+ -+ -+.PHONY: check-target-libgnatprj maybe-check-target-libgnatprj -+maybe-check-target-libgnatprj: -+@if target-libgnatprj -+maybe-check-target-libgnatprj: check-target-libgnatprj -+ -+# Dummy target for uncheckable module. -+check-target-libgnatprj: -+ -+@endif target-libgnatprj -+ -+.PHONY: install-target-libgnatprj maybe-install-target-libgnatprj -+maybe-install-target-libgnatprj: -+@if target-libgnatprj -+maybe-install-target-libgnatprj: install-target-libgnatprj -+ -+install-target-libgnatprj: installdirs -+ @: $(MAKE); $(unstage) -+ @r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(NORMAL_TARGET_EXPORTS) \ -+ (cd $(TARGET_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install) -+ -+@endif target-libgnatprj -+ -+# Other targets (info, dvi, pdf, etc.) -+ -+.PHONY: maybe-info-target-libgnatprj info-target-libgnatprj -+maybe-info-target-libgnatprj: -+@if target-libgnatprj -+maybe-info-target-libgnatprj: info-target-libgnatprj -+ -+# libgnatprj doesn't support info. -+info-target-libgnatprj: -+ -+@endif target-libgnatprj -+ -+.PHONY: maybe-dvi-target-libgnatprj dvi-target-libgnatprj -+maybe-dvi-target-libgnatprj: -+@if target-libgnatprj -+maybe-dvi-target-libgnatprj: dvi-target-libgnatprj -+ -+# libgnatprj doesn't support dvi. -+dvi-target-libgnatprj: -+ -+@endif target-libgnatprj -+ -+.PHONY: maybe-pdf-target-libgnatprj pdf-target-libgnatprj -+maybe-pdf-target-libgnatprj: -+@if target-libgnatprj -+maybe-pdf-target-libgnatprj: pdf-target-libgnatprj -+ -+pdf-target-libgnatprj: \ -+ configure-target-libgnatprj -+ @: $(MAKE); $(unstage) -+ @[ -f $(TARGET_SUBDIR)/libgnatprj/Makefile ] || exit 0 ; \ -+ r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(NORMAL_TARGET_EXPORTS) \ -+ echo "Doing pdf in $(TARGET_SUBDIR)/libgnatprj" ; \ -+ for flag in $(EXTRA_TARGET_FLAGS); do \ -+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ -+ done; \ -+ (cd $(TARGET_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ -+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ -+ "RANLIB=$${RANLIB}" \ -+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ -+ pdf) \ -+ || exit 1 -+ -+@endif target-libgnatprj -+ -+.PHONY: maybe-html-target-libgnatprj html-target-libgnatprj -+maybe-html-target-libgnatprj: -+@if target-libgnatprj -+maybe-html-target-libgnatprj: html-target-libgnatprj -+ -+# libgnatprj doesn't support html. -+html-target-libgnatprj: -+ -+@endif target-libgnatprj -+ -+.PHONY: maybe-TAGS-target-libgnatprj TAGS-target-libgnatprj -+maybe-TAGS-target-libgnatprj: -+@if target-libgnatprj -+maybe-TAGS-target-libgnatprj: TAGS-target-libgnatprj -+ -+# libgnatprj doesn't support TAGS. -+TAGS-target-libgnatprj: -+ -+@endif target-libgnatprj -+ -+.PHONY: maybe-install-info-target-libgnatprj install-info-target-libgnatprj -+maybe-install-info-target-libgnatprj: -+@if target-libgnatprj -+maybe-install-info-target-libgnatprj: install-info-target-libgnatprj -+ -+# libgnatprj doesn't support install-info. -+install-info-target-libgnatprj: -+ -+@endif target-libgnatprj -+ -+.PHONY: maybe-install-pdf-target-libgnatprj install-pdf-target-libgnatprj -+maybe-install-pdf-target-libgnatprj: -+@if target-libgnatprj -+maybe-install-pdf-target-libgnatprj: install-pdf-target-libgnatprj -+ -+install-pdf-target-libgnatprj: \ -+ configure-target-libgnatprj \ -+ pdf-target-libgnatprj -+ @: $(MAKE); $(unstage) -+ @[ -f $(TARGET_SUBDIR)/libgnatprj/Makefile ] || exit 0 ; \ -+ r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(NORMAL_TARGET_EXPORTS) \ -+ echo "Doing install-pdf in $(TARGET_SUBDIR)/libgnatprj" ; \ -+ for flag in $(EXTRA_TARGET_FLAGS); do \ -+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ -+ done; \ -+ (cd $(TARGET_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ -+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ -+ "RANLIB=$${RANLIB}" \ -+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ -+ install-pdf) \ -+ || exit 1 -+ -+@endif target-libgnatprj -+ -+.PHONY: maybe-install-html-target-libgnatprj install-html-target-libgnatprj -+maybe-install-html-target-libgnatprj: -+@if target-libgnatprj -+maybe-install-html-target-libgnatprj: install-html-target-libgnatprj -+ -+install-html-target-libgnatprj: \ -+ configure-target-libgnatprj \ -+ html-target-libgnatprj -+ @: $(MAKE); $(unstage) -+ @[ -f $(TARGET_SUBDIR)/libgnatprj/Makefile ] || exit 0 ; \ -+ r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(NORMAL_TARGET_EXPORTS) \ -+ echo "Doing install-html in $(TARGET_SUBDIR)/libgnatprj" ; \ -+ for flag in $(EXTRA_TARGET_FLAGS); do \ -+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ -+ done; \ -+ (cd $(TARGET_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ -+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ -+ "RANLIB=$${RANLIB}" \ -+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ -+ install-html) \ -+ || exit 1 -+ -+@endif target-libgnatprj -+ -+.PHONY: maybe-installcheck-target-libgnatprj installcheck-target-libgnatprj -+maybe-installcheck-target-libgnatprj: -+@if target-libgnatprj -+maybe-installcheck-target-libgnatprj: installcheck-target-libgnatprj -+ -+# libgnatprj doesn't support installcheck. -+installcheck-target-libgnatprj: -+ -+@endif target-libgnatprj -+ -+.PHONY: maybe-mostlyclean-target-libgnatprj mostlyclean-target-libgnatprj -+maybe-mostlyclean-target-libgnatprj: -+@if target-libgnatprj -+maybe-mostlyclean-target-libgnatprj: mostlyclean-target-libgnatprj -+ -+mostlyclean-target-libgnatprj: -+ @: $(MAKE); $(unstage) -+ @[ -f $(TARGET_SUBDIR)/libgnatprj/Makefile ] || exit 0 ; \ -+ r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(NORMAL_TARGET_EXPORTS) \ -+ echo "Doing mostlyclean in $(TARGET_SUBDIR)/libgnatprj" ; \ -+ for flag in $(EXTRA_TARGET_FLAGS); do \ -+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ -+ done; \ -+ (cd $(TARGET_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ -+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ -+ "RANLIB=$${RANLIB}" \ -+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ -+ mostlyclean) \ -+ || exit 1 -+ -+@endif target-libgnatprj -+ -+.PHONY: maybe-clean-target-libgnatprj clean-target-libgnatprj -+maybe-clean-target-libgnatprj: -+@if target-libgnatprj -+maybe-clean-target-libgnatprj: clean-target-libgnatprj -+ -+clean-target-libgnatprj: -+ @: $(MAKE); $(unstage) -+ @[ -f $(TARGET_SUBDIR)/libgnatprj/Makefile ] || exit 0 ; \ -+ r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(NORMAL_TARGET_EXPORTS) \ -+ echo "Doing clean in $(TARGET_SUBDIR)/libgnatprj" ; \ -+ for flag in $(EXTRA_TARGET_FLAGS); do \ -+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ -+ done; \ -+ (cd $(TARGET_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ -+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ -+ "RANLIB=$${RANLIB}" \ -+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ -+ clean) \ -+ || exit 1 -+ -+@endif target-libgnatprj -+ -+.PHONY: maybe-distclean-target-libgnatprj distclean-target-libgnatprj -+maybe-distclean-target-libgnatprj: -+@if target-libgnatprj -+maybe-distclean-target-libgnatprj: distclean-target-libgnatprj -+ -+distclean-target-libgnatprj: -+ @: $(MAKE); $(unstage) -+ @[ -f $(TARGET_SUBDIR)/libgnatprj/Makefile ] || exit 0 ; \ -+ r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(NORMAL_TARGET_EXPORTS) \ -+ echo "Doing distclean in $(TARGET_SUBDIR)/libgnatprj" ; \ -+ for flag in $(EXTRA_TARGET_FLAGS); do \ -+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ -+ done; \ -+ (cd $(TARGET_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ -+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ -+ "RANLIB=$${RANLIB}" \ -+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ -+ distclean) \ -+ || exit 1 -+ -+@endif target-libgnatprj -+ -+.PHONY: maybe-maintainer-clean-target-libgnatprj maintainer-clean-target-libgnatprj -+maybe-maintainer-clean-target-libgnatprj: -+@if target-libgnatprj -+maybe-maintainer-clean-target-libgnatprj: maintainer-clean-target-libgnatprj -+ -+maintainer-clean-target-libgnatprj: -+ @: $(MAKE); $(unstage) -+ @[ -f $(TARGET_SUBDIR)/libgnatprj/Makefile ] || exit 0 ; \ -+ r=`${PWD_COMMAND}`; export r; \ -+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ -+ $(NORMAL_TARGET_EXPORTS) \ -+ echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libgnatprj" ; \ -+ for flag in $(EXTRA_TARGET_FLAGS); do \ -+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ -+ done; \ -+ (cd $(TARGET_SUBDIR)/libgnatprj && \ -+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ -+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ -+ "RANLIB=$${RANLIB}" \ -+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \ -+ maintainer-clean) \ -+ || exit 1 -+ -+@endif target-libgnatprj -+ -+ -+ -+ -+ - .PHONY: configure-target-libgomp maybe-configure-target-libgomp - maybe-configure-target-libgomp: - @if gcc-bootstrap -@@ -52030,6 +52725,7 @@ - configure-target-rda: stage_last - configure-target-libada: stage_last - configure-target-libgnatvsn: stage_last -+configure-target-libgnatprj: stage_last - configure-target-libgomp: stage_last - @endif gcc-bootstrap - -@@ -52055,6 +52751,7 @@ - configure-target-rda: maybe-all-gcc - configure-target-libada: maybe-all-gcc - configure-target-libgnatvsn: maybe-all-gcc -+configure-target-libgnatprj: maybe-all-gcc - configure-target-libgomp: maybe-all-gcc - @endif gcc-no-bootstrap - -@@ -52310,7 +53007,10 @@ - all-fixincludes: maybe-all-libiberty - all-gnattools: maybe-all-libada - all-gnattools: maybe-all-libgnatvsn -+all-gnattools: maybe-all-libgnatprj - all-libgnatvsn: maybe-all-libada -+all-libgnatprj: maybe-all-libada -+all-libgnatprj: maybe-all-libgnatvsn - configure-mpfr: maybe-all-gmp - - configure-stage1-mpfr: maybe-all-stage1-gmp -@@ -52749,6 +53449,7 @@ - configure-target-rda: maybe-all-target-libgcc - configure-target-libada: maybe-all-target-libgcc - configure-target-libgnatvsn: maybe-all-target-libgcc -+configure-target-libgnatprj: maybe-all-target-libgcc - configure-target-libgomp: maybe-all-target-libgcc - @endif gcc-no-bootstrap - -@@ -52793,6 +53494,8 @@ - - configure-target-libgnatvsn: maybe-all-target-newlib maybe-all-target-libgloss - -+configure-target-libgnatprj: maybe-all-target-newlib maybe-all-target-libgloss -+ - configure-target-libgomp: maybe-all-target-newlib maybe-all-target-libgloss - - -Index: configure.ac -=================================================================== ---- configure.ac.orig -+++ configure.ac -@@ -155,7 +155,7 @@ - - # these libraries are used by various programs built for the host environment - # --host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr libada libgnatvsn" -+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr libada libgnatvsn libgnatprj" - - # these tools are built for the host environment - # Note, the powerpc-eabi build depends on sim occurring before gdb in order to -@@ -186,7 +186,8 @@ - ${libgcj} \ - target-libobjc \ - target-libada \ -- target-libgnatvsn" -+ target-libgnatvsn \ -+ target-libgnatprj" - - # these tools are built using the target libraries, and are intended to - # run only in the target environment -@@ -264,7 +265,7 @@ - - # Similarly, some are only suitable for cross toolchains. - # Remove these if host=target. --cross_only="target-libgloss target-newlib target-opcodes target-libada target-libgnatvsn" -+cross_only="target-libgloss target-newlib target-opcodes target-libada target-libgnatvsn target-libgnatprj" - - case $is_cross_compiler in - no) skipdirs="${skipdirs} ${cross_only}" ;; -@@ -341,7 +342,7 @@ - ENABLE_LIBADA=$enableval, - ENABLE_LIBADA=yes) - if test "${ENABLE_LIBADA}" != "yes" ; then -- noconfigdirs="$noconfigdirs libgnatvsn gnattools" -+ noconfigdirs="$noconfigdirs libgnatvsn libgnatprj gnattools" - fi - - AC_ARG_ENABLE(libssp, -Index: libgnatprj/configure.ac -=================================================================== ---- /dev/null -+++ libgnatprj/configure.ac -@@ -0,0 +1,144 @@ -+# Configure script for libada. -+# Copyright 2003, 2004 Free Software Foundation, Inc. -+# -+# This file is free software; you can redistribute it and/or modify it -+# under the terms of the GNU General Public License as published by -+# the Free Software Foundation; either version 2 of the License, or -+# (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, but -+# WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+# General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ -+AC_INIT -+AC_PREREQ([2.59]) -+ -+AC_CONFIG_SRCDIR([Makefile.in]) -+ -+# Start of actual configure tests -+ -+AC_PROG_INSTALL -+ -+AC_CANONICAL_BUILD -+AC_CANONICAL_HOST -+AC_CANONICAL_TARGET -+ -+sinclude(../config/acx.m4) -+ACX_NONCANONICAL_TARGET -+ -+# Need to pass this down for now :-P -+AC_PROG_LN_S -+ -+# Determine x_ada_cflags -+case $host in -+ hppa*) x_ada_cflags=-mdisable-indexing ;; -+ *) x_ada_cflags= ;; -+esac -+AC_SUBST([x_ada_cflags]) -+ -+# Determine what to build for 'gnattools' -+if test $build = $target ; then -+ # Note that build=target is almost certainly the wrong test; FIXME -+ default_gnattools_target="gnattools-native" -+else -+ default_gnattools_target="gnattools-cross" -+fi -+AC_SUBST([default_gnattools_target]) -+ -+# Target-specific stuff (defaults) -+TOOLS_TARGET_PAIRS= -+AC_SUBST(TOOLS_TARGET_PAIRS) -+ -+# Per-target case statement -+# ------------------------- -+case "${target}" in -+ alpha*-dec-vx*) # Unlike all other Vxworks -+ ;; -+ m68k*-wrs-vx* \ -+ | powerpc*-wrs-vxworks \ -+ | sparc*-wrs-vx* \ -+ | *86-wrs-vxworks \ -+ | xscale*-wrs-vx* \ -+ | xscale*-wrs-coff \ -+ | mips*-wrs-vx*) -+ TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb