From 29d6678fd546377459ef75cf54abeef5b969b5cf Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Fri, 27 Aug 2010 15:14:24 +0100 Subject: Major layout change to the packages directory Having one monolithic packages directory makes it hard to find things and is generally overwhelming. This commit splits it into several logical sections roughly based on function, recipes.txt gives more information about the classifications used. The opportunity is also used to switch from "packages" to "recipes" as used in OpenEmbedded as the term "packages" can be confusing to people and has many different meanings. Not all recipes have been classified yet, this is just a first pass at separating things out. Some packages are moved to meta-extras as they're no longer actively used or maintained. Signed-off-by: Richard Purdie --- .../initscripts/initscripts-1.0/arm/alignment.sh | 13 -- .../packages/initscripts/initscripts-1.0/banner.sh | 24 --- .../initscripts/initscripts-1.0/bootmisc.sh | 78 -------- .../initscripts/initscripts-1.0/checkfs.sh | 49 ----- .../initscripts/initscripts-1.0/checkroot.sh | 137 ------------- .../initscripts/initscripts-1.0/device_table.txt | 197 ------------------- meta/packages/initscripts/initscripts-1.0/devpts | 5 - .../packages/initscripts/initscripts-1.0/devpts.sh | 28 --- .../packages/initscripts/initscripts-1.0/finish.sh | 14 -- .../packages/initscripts/initscripts-1.0/functions | 14 -- meta/packages/initscripts/initscripts-1.0/halt | 29 --- .../initscripts/initscripts-1.0/hostname.sh | 13 -- .../initscripts-1.0/jornada6xx/checkroot.sh | 211 --------------------- .../initscripts-1.0/jornada7xx/checkroot.sh | 211 --------------------- .../initscripts/initscripts-1.0/mountall.sh | 38 ---- .../initscripts/initscripts-1.0/mountnfs.sh | 83 -------- .../initscripts/initscripts-1.0/om-gta01/inittab | 48 ----- .../initscripts/initscripts-1.0/openmn/extractfs | 7 - .../initscripts/initscripts-1.0/openmn/packages | 63 ------ .../initscripts/initscripts-1.0/openmn/umountfs | 17 -- .../initscripts-1.0/populate-volatile.sh | 197 ------------------- meta/packages/initscripts/initscripts-1.0/reboot | 15 -- .../initscripts/initscripts-1.0/rmnologin.sh | 20 -- .../initscripts/initscripts-1.0/save-rtc.sh | 13 -- meta/packages/initscripts/initscripts-1.0/sendsigs | 21 -- meta/packages/initscripts/initscripts-1.0/single | 24 --- meta/packages/initscripts/initscripts-1.0/sysfs.sh | 19 -- meta/packages/initscripts/initscripts-1.0/umountfs | 24 --- .../initscripts/initscripts-1.0/umountnfs.sh | 32 ---- meta/packages/initscripts/initscripts-1.0/urandom | 46 ----- .../packages/initscripts/initscripts-1.0/volatiles | 39 ---- meta/packages/initscripts/initscripts_1.0.bb | 121 ------------ 32 files changed, 1850 deletions(-) delete mode 100644 meta/packages/initscripts/initscripts-1.0/arm/alignment.sh delete mode 100644 meta/packages/initscripts/initscripts-1.0/banner.sh delete mode 100755 meta/packages/initscripts/initscripts-1.0/bootmisc.sh delete mode 100755 meta/packages/initscripts/initscripts-1.0/checkfs.sh delete mode 100755 meta/packages/initscripts/initscripts-1.0/checkroot.sh delete mode 100644 meta/packages/initscripts/initscripts-1.0/device_table.txt delete mode 100644 meta/packages/initscripts/initscripts-1.0/devpts delete mode 100755 meta/packages/initscripts/initscripts-1.0/devpts.sh delete mode 100755 meta/packages/initscripts/initscripts-1.0/finish.sh delete mode 100644 meta/packages/initscripts/initscripts-1.0/functions delete mode 100755 meta/packages/initscripts/initscripts-1.0/halt delete mode 100755 meta/packages/initscripts/initscripts-1.0/hostname.sh delete mode 100755 meta/packages/initscripts/initscripts-1.0/jornada6xx/checkroot.sh delete mode 100755 meta/packages/initscripts/initscripts-1.0/jornada7xx/checkroot.sh delete mode 100755 meta/packages/initscripts/initscripts-1.0/mountall.sh delete mode 100755 meta/packages/initscripts/initscripts-1.0/mountnfs.sh delete mode 100644 meta/packages/initscripts/initscripts-1.0/om-gta01/inittab delete mode 100755 meta/packages/initscripts/initscripts-1.0/openmn/extractfs delete mode 100755 meta/packages/initscripts/initscripts-1.0/openmn/packages delete mode 100755 meta/packages/initscripts/initscripts-1.0/openmn/umountfs delete mode 100755 meta/packages/initscripts/initscripts-1.0/populate-volatile.sh delete mode 100755 meta/packages/initscripts/initscripts-1.0/reboot delete mode 100755 meta/packages/initscripts/initscripts-1.0/rmnologin.sh delete mode 100644 meta/packages/initscripts/initscripts-1.0/save-rtc.sh delete mode 100755 meta/packages/initscripts/initscripts-1.0/sendsigs delete mode 100755 meta/packages/initscripts/initscripts-1.0/single delete mode 100644 meta/packages/initscripts/initscripts-1.0/sysfs.sh delete mode 100755 meta/packages/initscripts/initscripts-1.0/umountfs delete mode 100755 meta/packages/initscripts/initscripts-1.0/umountnfs.sh delete mode 100755 meta/packages/initscripts/initscripts-1.0/urandom delete mode 100644 meta/packages/initscripts/initscripts-1.0/volatiles delete mode 100644 meta/packages/initscripts/initscripts_1.0.bb (limited to 'meta/packages/initscripts') diff --git a/meta/packages/initscripts/initscripts-1.0/arm/alignment.sh b/meta/packages/initscripts/initscripts-1.0/arm/alignment.sh deleted file mode 100644 index b577b9a03..000000000 --- a/meta/packages/initscripts/initscripts-1.0/arm/alignment.sh +++ /dev/null @@ -1,13 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: alignment -# Required-Start: mountkernfs -# Required-Stop: mountkernfs -# Default-Start: S -# Default-Stop: -### END INIT INFO - -if [ -e /proc/cpu/alignment ]; then - echo "3" > /proc/cpu/alignment -fi - diff --git a/meta/packages/initscripts/initscripts-1.0/banner.sh b/meta/packages/initscripts/initscripts-1.0/banner.sh deleted file mode 100644 index 9e2b09125..000000000 --- a/meta/packages/initscripts/initscripts-1.0/banner.sh +++ /dev/null @@ -1,24 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: banner -# Required-Start: -# Required-Stop: -# Default-Start: S -# Default-Stop: -### END INIT INFO - -if [ ! -e /dev/tty ]; then - /bin/mknod -m 0666 /dev/tty c 5 0 -fi - -if ( > /dev/tty0 ) 2>/dev/null; then - vtmaster=/dev/tty0 -elif ( > /dev/vc/0 ) 2>/dev/null; then - vtmaster=/dev/vc/0 -elif ( > /dev/console ) 2>/dev/null; then - vtmaster=/dev/console -else - vtmaster=/dev/null -fi -echo > $vtmaster -echo "Please wait: booting..." > $vtmaster diff --git a/meta/packages/initscripts/initscripts-1.0/bootmisc.sh b/meta/packages/initscripts/initscripts-1.0/bootmisc.sh deleted file mode 100755 index bd11f9a2f..000000000 --- a/meta/packages/initscripts/initscripts-1.0/bootmisc.sh +++ /dev/null @@ -1,78 +0,0 @@ -### BEGIN INIT INFO -# Provides: bootmisc -# Required-Start: $local_fs mountvirtfs -# Required-Stop: $local_fs -# Default-Start: S -# Default-Stop: 0 6 -# Short-Description: Misc and other. -### END INIT INFO - -. /etc/default/rcS -# -# Put a nologin file in /etc to prevent people from logging in before -# system startup is complete. -# -if test "$DELAYLOGIN" = yes -then - echo "System bootup in progress - please wait" > /etc/nologin - cp /etc/nologin /etc/nologin.boot -fi - -# -# Set pseudo-terminal access permissions. -# -if test -c /dev/ttyp0 -then - chmod 666 /dev/tty[p-za-e][0-9a-f] - chown root:tty /dev/tty[p-za-e][0-9a-f] -fi - -# -# Apply /proc settings if defined -# -SYSCTL_CONF="/etc/sysctl.conf" -if [ -f "${SYSCTL_CONF}" ] -then - if [ -x "/sbin/sysctl" ] - then - /sbin/sysctl -p "${SYSCTL_CONF}" - else - echo "To have ${SYSCTL_CONF} applied during boot, install package ." - fi -fi - -# -# Update /etc/motd. -# -if test "$EDITMOTD" != no -then - uname -a > /etc/motd.tmp - sed 1d /etc/motd >> /etc/motd.tmp - mv /etc/motd.tmp /etc/motd -fi - -# -# This is as good a place as any for a sanity check -# /tmp should be a symlink to /var/tmp to cut down on the number -# of mounted ramdisks. -if test ! -L /tmp && test -d /var/tmp -then - rm -rf /tmp - ln -sf /var/tmp /tmp -fi - -# Set the system clock from hardware clock -# If the timestamp is 1 day or more recent than the current time, -# use the timestamp instead. -/etc/init.d/hwclock.sh start -if test -e /etc/timestamp2 -then - SYSTEMDATE=`date "+%Y%m%d%2H%2M"` - read TIMESTAMP < /etc/timestamp2 - NEEDUPDATE=`expr \( $TIMESTAMP \> $SYSTEMDATE + 10000 \)` - if [ $NEEDUPDATE -eq 1 ]; then - date $TIMESTAMP - /etc/init.d/hwclock.sh stop - fi -fi -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/checkfs.sh b/meta/packages/initscripts/initscripts-1.0/checkfs.sh deleted file mode 100755 index 91897d4cb..000000000 --- a/meta/packages/initscripts/initscripts-1.0/checkfs.sh +++ /dev/null @@ -1,49 +0,0 @@ -### BEGIN INIT INFO -# Provides: checkfs -# Required-Start: checkroot -# Required-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Check all other file systems -### END INIT INFO - -. /etc/default/rcS - -# -# Check the rest of the filesystems. -# -if test ! -f /fastboot -then - if test -f /forcefsck - then - force="-f" - else - force="" - fi - if test "$FSCKFIX" = yes - then - fix="-y" - else - fix="-a" - fi - spinner="-C" - case "$TERM" in - dumb|network|unknown|"") spinner="" ;; - esac - test "`uname -m`" = "s390" && spinner="" # This should go away - test "$VERBOSE" != no && echo "Checking all filesystems..." - fsck $spinner -R -A $fix $force - if test "$?" -gt 1 - then - echo - echo "fsck failed. Please repair manually." - echo - echo "CONTROL-D will exit from this shell and continue system startup." - echo - # Start a single user shell on the console - /sbin/sulogin $CONSOLE - fi -fi -rm -f /fastboot /forcefsck - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/checkroot.sh b/meta/packages/initscripts/initscripts-1.0/checkroot.sh deleted file mode 100755 index 02697ce9b..000000000 --- a/meta/packages/initscripts/initscripts-1.0/checkroot.sh +++ /dev/null @@ -1,137 +0,0 @@ -### BEGIN INIT INFO -# Provides: checkroot -# Required-Start: udev -# Required-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Check to root file system. -### END INIT INFO - -. /etc/default/rcS - -# -# Set SULOGIN in /etc/default/rcS to yes if you want a sulogin to be spawned -# from this script *before anything else* with a timeout, like SCO does. -# -test "$SULOGIN" = yes && sulogin -t 30 $CONSOLE - -# -# Read /etc/fstab. -# -exec 9< /etc/fstab -rootmode=rw -rootopts=rw -rootcheck=no -swap_on_md=no -devfs= -while read fs mnt type opts dump pass junk <&9 -do - case "$fs" in - ""|\#*) - continue; - ;; - /dev/md*) - # Swap on md device. - test "$type" = swap && swap_on_md=yes - ;; - /dev/*) - ;; - *) - # Might be a swapfile. - test "$type" = swap && swap_on_md=yes - ;; - esac - test "$type" = devfs && devfs="$fs" - test "$mnt" != / && continue - rootopts="$opts" - test "$pass" = 0 -o "$pass" = "" && rootcheck=no - case "$opts" in - ro|ro,*|*,ro|*,ro,*) - rootmode=ro - ;; - esac -done -exec 0>&9 9>&- - -# -# Activate the swap device(s) in /etc/fstab. This needs to be done -# before fsck, since fsck can be quite memory-hungry. -# -test "$VERBOSE" != no && echo "Activating swap" -swapon -a 2> /dev/null - -# -# Check the root filesystem. -# -if test -f /fastboot || test $rootcheck = no -then - test $rootcheck = yes && echo "Fast boot, no filesystem check" -else - # - # Ensure that root is quiescent and read-only before fsck'ing. - # - mount -n -o remount,ro / - if test $? = 0 - then - if test -f /forcefsck - then - force="-f" - else - force="" - fi - if test "$FSCKFIX" = yes - then - fix="-y" - else - fix="-a" - fi - spinner="-C" - case "$TERM" in - dumb|network|unknown|"") spinner="" ;; - esac - test `uname -m` = s390 && spinner="" # This should go away - test "$VERBOSE" != no && echo "Checking root filesystem..." - fsck $spinner $force $fix / - # - # If there was a failure, drop into single-user mode. - # - # NOTE: "failure" is defined as exiting with a return code of - # 2 or larger. A return code of 1 indicates that filesystem - # errors were corrected but that the boot may proceed. - # - if test "$?" -gt 1 - then - # Surprise! Re-directing from a HERE document (as in - # "cat << EOF") won't work, because the root is read-only. - echo - echo "fsck failed. Please repair manually and reboot. Please note" - echo "that the root filesystem is currently mounted read-only. To" - echo "remount it read-write:" - echo - echo " # mount -n -o remount,rw /" - echo - echo "CONTROL-D will exit from this shell and REBOOT the system." - echo - # Start a single user shell on the console - /sbin/sulogin $CONSOLE - reboot -f - fi - else - echo "*** ERROR! Cannot fsck root fs because it is not mounted read-only!" - echo - fi -fi - -# -# If the root filesystem was not marked as read-only in /etc/fstab, -# remount the rootfs rw but do not try to change mtab because it -# is on a ro fs until the remount succeeded. Then clean up old mtabs -# and finally write the new mtab. -# -mount -n -o remount,$rootmode / -if test "$rootmode" = rw -then - ln -sf /proc/mounts /dev/mtab -fi - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/device_table.txt b/meta/packages/initscripts/initscripts-1.0/device_table.txt deleted file mode 100644 index a302c5aca..000000000 --- a/meta/packages/initscripts/initscripts-1.0/device_table.txt +++ /dev/null @@ -1,197 +0,0 @@ -#/dev/ d 775 0 0 - - - - - -#/dev/msys d 775 0 0 - - - - - -#/dev/pts d 775 0 0 - - - - - -#/var d 775 0 0 - - - - - -/boot/var/empty d 755 0 3 - - - - -/dev/apm_bios c 660 0 46 10 134 - - - -/dev/audio c 660 0 29 14 4 - - - -/dev/audio1 c 660 0 29 14 20 - - - -/dev/audio2 c 660 0 29 14 36 - - - -/dev/audio3 c 660 0 29 14 52 - - - -/dev/bty c 644 0 0 60 0 0 1 5 -/dev/sharp_fl c 640 0 44 254 0 - - - -/dev/console c 660 0 5 5 1 - - -/dev/cusa0 c 640 0 0 205 5 - - - -/dev/cusa1 c 640 0 0 205 6 - - - -/dev/cusa2 c 640 0 0 205 7 - - - -/dev/dsp c 660 0 29 14 3 - - - -/dev/dsp1 c 660 0 29 14 19 - - - -/dev/dsp2 c 660 0 29 14 35 - - - -/dev/dsp3 c 660 0 29 14 51 - - - -/dev/fb c 660 0 44 29 0 0 32 2 -/dev/fb0autodetect c 660 0 44 29 1 - - - -/dev/fb0current c 660 0 44 29 0 - - - -#/dev/fb1 c 660 0 44 29 32 - - - -/dev/fb1autodetect c 660 0 44 29 33 - - - -/dev/fb1current c 660 0 44 29 32 - - - -/dev/full c 666 0 7 - - - -/dev/hda b 660 0 6 3 0 - - - -/dev/hda b 660 0 6 3 1 1 1 20 -/dev/hdb b 660 0 6 3 64 - - - -/dev/hdb b 660 0 6 3 65 1 1 20 -/dev/hdc b 660 0 6 22 0 - - - -/dev/hdc b 660 0 6 22 1 1 1 20 -/dev/initctl p 600 0 0 - - - - -/dev/i2c0 c 660 0 0 89 0 - - - -/dev/inportbm c 660 0 0 10 2 - - - -/dev/input/event c 660 0 0 13 64 0 1 20 -/dev/ircomm0 c 640 0 0 161 0 - - - -/dev/jbm c 660 0 0 10 4 - - - -/dev/kmem c 640 0 15 1 2 - - - -/dev/lirc c 660 0 5 61 0 - - - -/dev/logibm c 660 0 0 10 0 - - - -/dev/loop0 b 660 0 11 7 0 - - - -/dev/loop1 b 660 0 11 7 1 - - - -/dev/mem c 640 0 15 1 1 - - - -/dev/mixer c 666 0 0 14 0 - - - -/dev/mixer1 c 666 0 0 14 16 - - - -/dev/mixer2 c 666 0 0 14 32 - - - -/dev/mixer3 c 666 0 0 14 48 - - - -/dev/mmcda b 640 0 0 60 0 - - - -/dev/mmcda1 b 640 0 0 60 1 - - - -/dev/mmcda2 b 640 0 0 60 2 - - - -/dev/msys/fla b 660 0 11 100 0 - - - -/dev/msys/fla1 b 660 0 11 100 1 - - - -/dev/msys/fla2 b 660 0 11 100 2 - - - -/dev/msys/fla3 b 660 0 11 100 3 - - - -/dev/msys/fla4 b 660 0 11 100 4 - - - -/dev/msys/flb b 660 0 11 100 64 - - - -/dev/msys/flb1 b 660 0 11 100 65 - - - -/dev/msys/flb2 b 660 0 11 100 66 - - - -/dev/msys/flb3 b 660 0 11 100 67 - - - -/dev/msys/flb4 b 660 0 11 100 68 - - - -/dev/mtd c 660 0 6 90 0 0 2 8 -/dev/mtdblock b 640 0 0 31 0 0 1 8 -/dev/nst0 c 664 0 11 9 128 - - - -/dev/nst0a c 664 0 11 9 224 - - - -/dev/nst0l c 664 0 11 9 160 - - - -/dev/nst0m c 664 0 11 9 192 - - - -/dev/nst1 c 664 0 11 9 129 - - - -/dev/nst1a c 664 0 11 9 225 - - - -/dev/nst1l c 664 0 11 9 161 - - - -/dev/nst1m c 664 0 11 9 193 - - - -/dev/null c 666 0 0 1 3 - - - -/dev/par0 c 660 0 7 6 0 - - - -/dev/par1 c 660 0 7 6 1 - - - -/dev/par2 c 660 0 7 6 2 - - - -/dev/port c 640 0 15 1 4 - - - -/dev/ppp c 640 0 0 108 0 - - - -/dev/psaux c 660 0 0 10 1 - - - -/dev/ptmx c 666 0 5 5 2 - - - -/dev/ptya0 c 660 0 5 2 176 - - - -/dev/ptya1 c 660 0 5 2 177 - - - -/dev/ptya2 c 660 0 5 2 178 - - - -/dev/ptya3 c 660 0 5 2 179 - - - -/dev/ptya4 c 660 0 5 2 180 - - - -/dev/ptya5 c 660 0 5 2 181 - - - -/dev/ptya6 c 660 0 5 2 182 - - - -/dev/ptya7 c 660 0 5 2 183 - - - -/dev/ptya8 c 660 0 5 2 184 - - - -/dev/ptya9 c 660 0 5 2 185 - - - -/dev/ptyaa c 660 0 5 2 186 - - - -/dev/ptyab c 660 0 5 2 187 - - - -/dev/ptyac c 660 0 5 2 188 - - - -/dev/ptyad c 660 0 5 2 189 - - - -/dev/ptyae c 660 0 5 2 190 - - - -/dev/ptyaf c 660 0 5 2 191 - - - -/dev/ram b 640 0 0 1 0 0 1 4 -/dev/random c 444 0 0 1 8 - - - -/dev/rfcomm0 c 660 0 0 216 0 - - - -/dev/rfcomm1 c 660 0 0 216 1 - - - -/dev/rfcomm2 c 660 0 0 216 2 - - - -/dev/rfcomm3 c 660 0 0 216 3 - - - -/dev/rfcomm4 c 660 0 0 216 4 - - - -/dev/rfcomm5 c 660 0 0 216 5 - - - -/dev/rfcomm6 c 660 0 0 216 6 - - - -/dev/rfcomm7 c 660 0 0 216 7 - - - -/dev/rfcomm8 c 660 0 0 216 8 - - - -/dev/rfcomm9 c 660 0 0 216 9 - - - -/dev/rfcomm10 c 660 0 0 216 10 - - - -/dev/rfcomm11 c 660 0 0 216 11 - - - -/dev/rfcomm12 c 660 0 0 216 12 - - - -/dev/rfcomm13 c 660 0 0 216 13 - - - -/dev/rfcomm14 c 660 0 0 216 14 - - - -/dev/rfcomm15 c 660 0 0 216 15 - - - -/dev/rmidi0 c 660 0 0 35 64 - - - -/dev/rmidi1 c 660 0 0 35 65 - - - -/dev/rmidi2 c 660 0 0 35 66 - - - -/dev/rmidi3 c 660 0 0 35 67 - - - -/dev/rtc c 660 0 47 10 135 - - - -/dev/scd0 b 660 0 6 11 0 - - - -/dev/scd1 b 660 0 6 11 1 - - - -/dev/sda b 660 0 6 8 0 - - - -/dev/sda1 b 660 0 6 8 1 - - - -/dev/sda2 b 660 0 6 8 2 - - - -/dev/sda3 b 660 0 6 8 3 - - - -/dev/sda4 b 660 0 6 8 4 - - - -/dev/sda5 b 660 0 6 8 5 - - - -/dev/sda6 b 660 0 6 8 6 - - - -/dev/sda7 b 660 0 6 8 7 - - - -/dev/sda8 b 660 0 6 8 8 - - - -/dev/sda9 b 660 0 6 8 9 - - - -/dev/sdb b 660 0 6 8 16 - - - -/dev/sdb1 b 660 0 6 8 17 - - - -/dev/sdb2 b 660 0 6 8 18 - - - -/dev/sdb3 b 660 0 6 8 19 - - - -/dev/sdb4 b 660 0 6 8 20 - - - -/dev/sdb5 b 660 0 6 8 21 - - - -/dev/sdb6 b 660 0 6 8 22 - - - -/dev/sdb7 b 660 0 6 8 23 - - - -/dev/sdb8 b 660 0 6 8 24 - - - -/dev/sdb9 b 660 0 6 8 25 - - - -/dev/sdc b 660 0 6 8 32 - - - -/dev/sdc1 b 660 0 6 8 33 - - - -/dev/sdc2 b 660 0 6 8 34 - - - -/dev/sdc3 b 660 0 6 8 35 - - - -/dev/sdc4 b 660 0 6 8 36 - - - -/dev/sdc5 b 660 0 6 8 37 - - - -/dev/sdc6 b 660 0 6 8 38 - - - -/dev/sdc7 b 660 0 6 8 39 - - - -/dev/sdc8 b 660 0 6 8 40 - - - -/dev/sdc9 b 660 0 6 8 41 - - - -/dev/sd_slotstat c 660 0 6 10 240 - - - -/dev/sharp_audioctl c 660 0 29 10 213 - - - -/dev/sharp_buz c 660 0 29 10 211 - - - -/dev/sharp_kbdctl c 660 0 45 10 214 - - - -/dev/sharp_led c 660 0 48 10 210 - - - -/dev/sharp_ts c 640 0 45 11 0 - - - -/dev/smtpe0 c 640 0 0 35 128 - - - -/dev/smtpe1 c 640 0 0 35 129 - - - -/dev/smtpe2 c 640 0 0 35 130 - - - -/dev/smtpe3 c 640 0 0 35 131 - - - -/dev/sndstat c 660 0 29 14 6 - - - -/dev/snd/seq c 660 0 0 116 1 - - - -/dev/snd/timer c 660 0 0 116 33 - - - -/dev/snd/controlC0 c 660 0 0 116 0 - - - -/dev/snd/controlC1 c 660 0 0 116 32 - - - -/dev/snd/controlC2 c 660 0 0 116 64 - - - -/dev/snd/controlC3 c 660 0 0 116 96 - - - -/dev/snd/hwC0D0 c 660 0 0 116 4 - - - -/dev/snd/hwC0D1 c 660 0 0 116 5 - - - -/dev/snd/hwC0D2 c 660 0 0 116 6 - - - -/dev/snd/hwC0D3 c 660 0 0 116 7 - - - -/dev/snd/pcmC0D0c c 660 0 0 116 24 - - - -/dev/snd/pcmC0D0p c 660 0 0 116 16 - - - -/dev/snd/pcmC0D1c c 660 0 0 116 25 - - - -/dev/snd/pcmC0D1p c 660 0 0 116 17 - - - -/dev/snd/pcmC0D2c c 660 0 0 116 26 - - - -/dev/snd/pcmC0D2p c 660 0 0 116 18 - - - -/dev/snd/pcmC0D3c c 660 0 0 116 27 - - - -/dev/snd/pcmC0D3p c 660 0 0 116 19 - - - -/dev/st0 c 660 0 11 9 0 - - - -/dev/st0a c 660 0 11 9 96 - - - -/dev/st0l c 660 0 11 9 32 - - - -/dev/st0m c 660 0 11 9 64 - - - -/dev/st1 c 660 0 11 9 1 - - - -/dev/st1a c 660 0 11 9 97 - - - -/dev/st1l c 660 0 11 9 33 - - - -/dev/st1m c 660 0 11 9 65 - - - -/dev/tty c 664 0 5 5 0 - - - -/dev/tty c 666 0 5 4 0 0 1 9 -/dev/ttyS c 640 0 5 4 64 0 1 4 -/dev/ttySA c 640 0 5 204 5 0 1 4 -/dev/ttyUSB c 660 0 5 188 0 0 1 2 -/dev/urandom c 644 0 0 1 9 - - - -/dev/usbmouse c 640 0 45 10 32 - - - -/dev/zero c 644 0 0 1 5 - - - -/dev/input/mice c 660 0 0 13 63 - - - diff --git a/meta/packages/initscripts/initscripts-1.0/devpts b/meta/packages/initscripts/initscripts-1.0/devpts deleted file mode 100644 index 4a0978b40..000000000 --- a/meta/packages/initscripts/initscripts-1.0/devpts +++ /dev/null @@ -1,5 +0,0 @@ -# GID of the `tty' group -TTYGRP=5 - -# Set to 600 to have `mesg n' be the default -TTYMODE=620 diff --git a/meta/packages/initscripts/initscripts-1.0/devpts.sh b/meta/packages/initscripts/initscripts-1.0/devpts.sh deleted file mode 100755 index 18202adcc..000000000 --- a/meta/packages/initscripts/initscripts-1.0/devpts.sh +++ /dev/null @@ -1,28 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: devpts -# Required-Start: udev -# Required-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Mount /dev/pts file systems. -### END INIT INFO - -. /etc/default/devpts - -if grep -q devpts /proc/filesystems -then - # - # Create multiplexor device. - # - test -c /dev/ptmx || mknod -m 666 /dev/ptmx c 5 2 - - # - # Mount /dev/pts if needed. - # - if ! grep -q devpts /proc/mounts - then - mkdir -p /dev/pts - mount -t devpts devpts /dev/pts -ogid=${TTYGRP},mode=${TTYMODE} - fi -fi diff --git a/meta/packages/initscripts/initscripts-1.0/finish.sh b/meta/packages/initscripts/initscripts-1.0/finish.sh deleted file mode 100755 index 183a384fa..000000000 --- a/meta/packages/initscripts/initscripts-1.0/finish.sh +++ /dev/null @@ -1,14 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: finish.sh -# Required-Start: $remote_fs rmnologin -# Required-Stop: -# Default-Start: 2 3 4 5 -# Default-Stop: -# Short-Description: Finish system start -# Description: -### END INIT INFO - -if ! test -e /etc/.configured; then - > /etc/.configured -fi diff --git a/meta/packages/initscripts/initscripts-1.0/functions b/meta/packages/initscripts/initscripts-1.0/functions deleted file mode 100644 index 689fd32b3..000000000 --- a/meta/packages/initscripts/initscripts-1.0/functions +++ /dev/null @@ -1,14 +0,0 @@ -# -*-Shell-script-*- -# -# functions This file contains functions to be used by most or all -# shell scripts in the /etc/init.d directory. -# - -machine_id() { # return the machine ID - awk 'BEGIN { FS=": " } /Hardware/ { gsub(" ", "_", $2); print tolower($2) } ' &0 &9 9>&- - -# -# Activate the swap device(s) in /etc/fstab. This needs to be done -# before fsck, since fsck can be quite memory-hungry. -# -doswap=no -test -d /proc/1 || mount -n /proc -case "`uname -r`" in - 2.[0123].*) - if test $swap_on_md = yes && grep -qs resync /proc/mdstat - then - test "$VERBOSE" != no && echo "Not activating swap - RAID array resyncing" - else - doswap=yes - fi - ;; - *) - doswap=yes - ;; -esac -if test $doswap = yes -then - test "$VERBOSE" != no && echo "Activating swap" - swapon -a 2> /dev/null -fi - -# -# Check the root filesystem. -# -if test -f /fastboot || test $rootcheck = no -then - test $rootcheck = yes && echo "Fast boot, no filesystem check" -else - # - # Ensure that root is quiescent and read-only before fsck'ing. - # - mount -n -o remount,ro / - if test $? = 0 - then - if test -f /forcefsck - then - force="-f" - else - force="" - fi - if test "$FSCKFIX" = yes - then - fix="-y" - else - fix="-a" - fi - spinner="-C" - case "$TERM" in - dumb|network|unknown|"") spinner="" ;; - esac - test `uname -m` = s390 && spinner="" # This should go away - test "$VERBOSE" != no && echo "Checking root filesystem..." - fsck $spinner $force $fix / - # - # If there was a failure, drop into single-user mode. - # - # NOTE: "failure" is defined as exiting with a return code of - # 2 or larger. A return code of 1 indicates that filesystem - # errors were corrected but that the boot may proceed. - # - if test "$?" -gt 1 - then - - # Since this script is run very early in the boot-process, it should be safe to assume that the - # output is printed to VT1. However, some distributions use a bootsplash to hide the "ugly" boot - # messages and having the bootsplash "hang" due to a waiting fsck prompt is less than ideal - chvt 1 - - # Surprise! Re-directing from a HERE document (as in - # "cat << EOF") won't work, because the root is read-only. - echo - echo "fsck failed. Please repair manually and reboot. Please note" - echo "that the root filesystem is currently mounted read-only. To" - echo "remount it read-write:" - echo - echo " # mount -n -o remount,rw /" - echo - echo "CONTROL-D will exit from this shell and REBOOT the system." - echo - # Start a single user shell on the console - /sbin/sulogin $CONSOLE - reboot -f - fi - else - echo "*** ERROR! Cannot fsck root fs because it is not mounted read-only!" - echo - fi -fi - -# -# If the root filesystem was not marked as read-only in /etc/fstab, -# remount the rootfs rw but do not try to change mtab because it -# is on a ro fs until the remount succeeded. Then clean up old mtabs -# and finally write the new mtab. -# This part is only needed if the rootfs was mounted ro. -# -if [ $(grep rootfs /proc/mounts | awk '{print $4}') = rw ]; then - exit 0 -fi - -# Add a second check, which seems to be needed for some kernel versions -if [ $(grep "/dev/root" /proc/mounts | awk '{print $4}') = rw ]; then - exit 0 -fi - - -echo "Remounting root file system..." -mount -n -o remount,$rootmode / -if test "$rootmode" = rw -then - if test ! -L /etc/mtab - then - rm -f /etc/mtab~ /etc/nologin - : > /etc/mtab - fi - mount -f -o remount / - mount -f /proc - test "$devfs" && grep -q '^devfs /dev' /proc/mounts && mount -f "$devfs" -fi - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/jornada7xx/checkroot.sh b/meta/packages/initscripts/initscripts-1.0/jornada7xx/checkroot.sh deleted file mode 100755 index 9e2d3cfc8..000000000 --- a/meta/packages/initscripts/initscripts-1.0/jornada7xx/checkroot.sh +++ /dev/null @@ -1,211 +0,0 @@ -# -# checkroot.sh Check to root filesystem. -# -# Version: @(#)checkroot.sh 2.84 25-Jan-2002 miquels@cistron.nl -# - -. /etc/default/rcS - -# -# Set SULOGIN in /etc/default/rcS to yes if you want a sulogin to be spawned -# from this script *before anything else* with a timeout, like SCO does. -# -test "$SULOGIN" = yes && sulogin -t 30 $CONSOLE - -# -# Ensure that bdflush (update) is running before any major I/O is -# performed (the following fsck is a good example of such activity :). -# -test -x /sbin/update && update - -# -# Read /etc/fstab. -# -exec 9>&0 &9 9>&- - -# -# Activate the swap device(s) in /etc/fstab. This needs to be done -# before fsck, since fsck can be quite memory-hungry. -# -doswap=no -test -d /proc/1 || mount -n /proc -case "`uname -r`" in - 2.[0123].*) - if test $swap_on_md = yes && grep -qs resync /proc/mdstat - then - test "$VERBOSE" != no && echo "Not activating swap - RAID array resyncing" - else - doswap=yes - fi - ;; - *) - doswap=yes - ;; -esac -if test $doswap = yes -then - test "$VERBOSE" != no && echo "Activating swap" - swapon -a 2> /dev/null -fi - -# -# Check the root filesystem. -# -if test -f /fastboot || test $rootcheck = no -then - test $rootcheck = yes && echo "Fast boot, no filesystem check" -else - # - # Ensure that root is quiescent and read-only before fsck'ing. - # - mount -n -o remount,ro / - if test $? = 0 - then - if test -f /forcefsck - then - force="-f" - else - force="" - fi - if test "$FSCKFIX" = yes - then - fix="-y" - else - fix="-a" - fi - spinner="-C" - case "$TERM" in - dumb|network|unknown|"") spinner="" ;; - esac - test `uname -m` = s390 && spinner="" # This should go away - test "$VERBOSE" != no && echo "Checking root filesystem..." - fsck $spinner $force $fix / - # - # If there was a failure, drop into single-user mode. - # - # NOTE: "failure" is defined as exiting with a return code of - # 2 or larger. A return code of 1 indicates that filesystem - # errors were corrected but that the boot may proceed. - # - if test "$?" -gt 1 - then - - # Since this script is run very early in the boot-process, it should be safe to assume that the - # output is printed to VT1. However, some distributions use a bootsplash to hide the "ugly" boot - # messages and having the bootsplash "hang" due to a waiting fsck prompt is less than ideal - chvt 1 - - # Surprise! Re-directing from a HERE document (as in - # "cat << EOF") won't work, because the root is read-only. - echo - echo "fsck failed. Please repair manually and reboot. Please note" - echo "that the root filesystem is currently mounted read-only. To" - echo "remount it read-write:" - echo - echo " # mount -n -o remount,rw /" - echo - echo "CONTROL-D will exit from this shell and REBOOT the system." - echo - # Start a single user shell on the console - /sbin/sulogin $CONSOLE - reboot -f - fi - else - echo "*** ERROR! Cannot fsck root fs because it is not mounted read-only!" - echo - fi -fi - -# -# If the root filesystem was not marked as read-only in /etc/fstab, -# remount the rootfs rw but do not try to change mtab because it -# is on a ro fs until the remount succeeded. Then clean up old mtabs -# and finally write the new mtab. -# This part is only needed if the rootfs was mounted ro. -# -if [ $(grep rootfs /proc/mounts | awk '{print $4}') = rw ]; then - exit 0 -fi - -# Add a second check, which seems to be needed for some kernel versions -if [ $(grep "/dev/root" /proc/mounts | awk '{print $4}') = rw ]; then - exit 0 -fi - - -echo "Remounting root file system..." -mount -n -o remount,$rootmode / -if test "$rootmode" = rw -then - if test ! -L /etc/mtab - then - rm -f /etc/mtab~ /etc/nologin - : > /etc/mtab - fi - mount -f -o remount / - mount -f /proc - test "$devfs" && grep -q '^devfs /dev' /proc/mounts && mount -f "$devfs" -fi - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/mountall.sh b/meta/packages/initscripts/initscripts-1.0/mountall.sh deleted file mode 100755 index 9d4f97b68..000000000 --- a/meta/packages/initscripts/initscripts-1.0/mountall.sh +++ /dev/null @@ -1,38 +0,0 @@ -### BEGIN INIT INFO -# Provides: mountall -# Required-Start: mountvirtfs -# Required-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Mount all filesystems. -# Description: -### END INIT INFO - -. /etc/default/rcS - -# -# Mount local filesystems in /etc/fstab. For some reason, people -# might want to mount "proc" several times, and mount -v complains -# about this. So we mount "proc" filesystems without -v. -# -test "$VERBOSE" != no && echo "Mounting local filesystems..." -mount -at nonfs,nosmbfs,noncpfs 2>/dev/null - -# -# We might have mounted something over /dev, see if /dev/initctl is there. -# -if test ! -p /dev/initctl -then - rm -f /dev/initctl - mknod -m 600 /dev/initctl p -fi -kill -USR1 1 - -# -# Execute swapon command again, in case we want to swap to -# a file on a now mounted filesystem. -# -swapon -a 2> /dev/null - -: exit 0 - diff --git a/meta/packages/initscripts/initscripts-1.0/mountnfs.sh b/meta/packages/initscripts/initscripts-1.0/mountnfs.sh deleted file mode 100755 index 46c58b16a..000000000 --- a/meta/packages/initscripts/initscripts-1.0/mountnfs.sh +++ /dev/null @@ -1,83 +0,0 @@ -### BEGIN INIT INFO -# Provides: mountnfs -# Required-Start: $local_fs $network $portmap -# Required-Stop: -# Default-Start: S -# Default-Stop: -### END INIT INFO - -. /etc/default/rcS - -# -# Run in a subshell because of I/O redirection. -# -test -f /etc/fstab && ( - -# -# Read through fstab line by line. If it is NFS, set the flag -# for mounting NFS filesystems. If any NFS partition is found and it -# not mounted with the nolock option, we start the portmapper. -# -portmap=no -mount_nfs=no -mount_smb=no -mount_ncp=no -while read device mountpt fstype options -do - case "$device" in - ""|\#*) - continue - ;; - esac - - case "$options" in - *noauto*) - continue - ;; - esac - - if test "$fstype" = nfs - then - mount_nfs=yes - case "$options" in - *nolock*) - ;; - *) - portmap=yes - ;; - esac - fi - if test "$fstype" = smbfs - then - mount_smb=yes - fi - if test "$fstype" = ncpfs - then - mount_ncp=yes - fi -done - -exec 0>&1 - -if test "$portmap" = yes -then - if test -x /sbin/portmap - then - echo -n "Starting portmapper... " - start-stop-daemon --start --quiet --exec /sbin/portmap - sleep 2 - fi -fi - -if test "$mount_nfs" = yes || test "$mount_smb" = yes || test "$mount_ncp" = yes -then - echo "Mounting remote filesystems..." - test "$mount_nfs" = yes && mount -a -t nfs - test "$mount_smb" = yes && mount -a -t smbfs - test "$mount_ncp" = yes && mount -a -t ncpfs -fi - -) < /etc/fstab - -: exit 0 - diff --git a/meta/packages/initscripts/initscripts-1.0/om-gta01/inittab b/meta/packages/initscripts/initscripts-1.0/om-gta01/inittab deleted file mode 100644 index 8d313b2a5..000000000 --- a/meta/packages/initscripts/initscripts-1.0/om-gta01/inittab +++ /dev/null @@ -1,48 +0,0 @@ -# /etc/inittab: init(8) configuration. -# $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $ - -# The default runlevel. -id:5:initdefault: - -# Boot-time system configuration/initialization script. -# This is run first except when booting in emergency (-b) mode. -si::sysinit:/etc/init.d/rcS - -# What to do in single-user mode. -~~:S:wait:/sbin/sulogin - -# Shut down if kernel sends us SIGINT or SIGPWR -ca::ctrlaltdel:/sbin/halt -p -pf::powerfailnow:/sbin/halt -p - -# /etc/init.d executes the S and K scripts upon change -# of runlevel. -# -# Runlevel 0 is halt. -# Runlevel 1 is single-user. -# Runlevels 2-5 are multi-user. -# Runlevel 6 is reboot. - -l0:0:wait:/etc/init.d/rc 0 -l1:1:wait:/etc/init.d/rc 1 -l2:2:wait:/etc/init.d/rc 2 -l3:3:wait:/etc/init.d/rc 3 -l4:4:wait:/etc/init.d/rc 4 -l5:5:wait:/etc/init.d/rc 5 -l6:6:wait:/etc/init.d/rc 6 -# Normally not reached, but fallthrough in case of emergency. -z6:6:respawn:/sbin/sulogin - -# /sbin/getty invocations for the runlevels. -# -# The "id" field MUST be the same as the last -# characters of the device (after "tty"). -# -# Format: -# ::: - -# NOTE: FIC GTA01 has this odd multiplexer on ttySAC0 since -# GSM shares it with the serial output. We only allow -# the getty in runlevel 2 to cope with that. gsmd gets -# started in runlevel 3. -- mickey@openmoko.org -S:2:respawn:/sbin/getty 115200 ttySAC0 diff --git a/meta/packages/initscripts/initscripts-1.0/openmn/extractfs b/meta/packages/initscripts/initscripts-1.0/openmn/extractfs deleted file mode 100755 index 7e57dedd2..000000000 --- a/meta/packages/initscripts/initscripts-1.0/openmn/extractfs +++ /dev/null @@ -1,7 +0,0 @@ -#!/bin/sh - -if (grep -q 'tmpfs.*/var.*tmpfs' /proc/mounts) -then - test "$VERBOSE" != no && echo "Copying /var filesystem..." - cp -a /boot/var / -fi diff --git a/meta/packages/initscripts/initscripts-1.0/openmn/packages b/meta/packages/initscripts/initscripts-1.0/openmn/packages deleted file mode 100755 index 2566487d2..000000000 --- a/meta/packages/initscripts/initscripts-1.0/openmn/packages +++ /dev/null @@ -1,63 +0,0 @@ -#!/bin/sh -# Original author: ??? -# -# Additions by Steph Meslin-Weber: -# x Percentage display -# x Dot display of dependency installations -# - removed both of above -# - display is now X of Y packages and current package name being installed - -#. /etc/default/rcS - -reconfigure () { - pkg=$1 - path=$2 - isdependent=$3 - test -e "$path/info/$pkg.control" || return 1 - depends="`cat $path/info/$pkg.control|grep Depends|cut -d: -f2`" - - # make sure we haven't already installed this package - isthere=`cat /tmp/.configured.list|grep $pkg` - if test "$isthere" != ""; then - return 1 - fi - - if test "$depends" != ""; then - for dep in $depends; do - (echo $log|grep $dep >/dev/null 2>&1) || ( reconfigure $dep $path "$max" "$pkg" && log="$log $dep"; ) - done - fi - - echo -ne " ${pkg}" - - test -e "$path/info/$pkg.prerm" && $path/info/$pkg.prerm unconfigure >/dev/null 2>&1 - test -e "$path/info/$pkg.postinst" && $path/info/$pkg.postinst configure >/dev/null 2>&1 - - log="$log $pkg" - - # append the installed package name to the list - echo -ne "$pkg\n" >> /tmp/.configured.list - - echo - return 0 -} - -if test ! -e /etc/.configured; then - echo "Reconfiguring all packages installed to root:" - - # create unique packages list file - rm -f /tmp/.configured.list - touch /tmp/.configured.list - - log="" - - for control in /usr/lib/ipkg/info/*.control; do - package=`echo $control|sed -e 's,.*/,,g; s,\.control,,g;'` - (echo $log|grep $package >/dev/null 2>&1) || reconfigure $package /usr/lib/ipkg - done - - # cleanup unique packages list file - rm -f /tmp/.configured.list -fi - -test -f /usr/lib/ipkg/info/task-ramses || ipkg install task-ramses diff --git a/meta/packages/initscripts/initscripts-1.0/openmn/umountfs b/meta/packages/initscripts/initscripts-1.0/openmn/umountfs deleted file mode 100755 index 399194109..000000000 --- a/meta/packages/initscripts/initscripts-1.0/openmn/umountfs +++ /dev/null @@ -1,17 +0,0 @@ -#! /bin/sh -# -# umountfs Turn off swap and unmount all local filesystems. -# - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -echo "Deactivating swap..." -swapoff -a - -# We leave /proc mounted. -echo "Unmounting local filesystems..." -umount -f -a -r - -mount -o remount,ro / - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/populate-volatile.sh b/meta/packages/initscripts/initscripts-1.0/populate-volatile.sh deleted file mode 100755 index 1813fd124..000000000 --- a/meta/packages/initscripts/initscripts-1.0/populate-volatile.sh +++ /dev/null @@ -1,197 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: volatile -# Required-Start: $local_fs -# Required-Stop: $local_fs -# Default-Start: S -# Default-Stop: -# Short-Description: Populate the volatile filesystem -### END INIT INFO - -. /etc/default/rcS - -CFGDIR="/etc/default/volatiles" -TMPROOT="/var/tmp" -COREDEF="00_core" - -[ "${VERBOSE}" != "no" ] && echo "Populating volatile Filesystems." - -create_file() { - EXEC=" - touch \"$1\"; - chown ${TUSER}.${TGROUP} $1 || echo \"Failed to set owner -${TUSER}- for -$1-.\" >/dev/tty0 2>&1; - chmod ${TMODE} $1 || echo \"Failed to set mode -${TMODE}- for -$1-.\" >/dev/tty0 2>&1 " - - test "$VOLATILE_ENABLE_CACHE" = yes && echo "$EXEC" >> /etc/volatile.cache - - [ -e "$1" ] && { - [ "${VERBOSE}" != "no" ] && echo "Target already exists. Skipping." - } || { - eval $EXEC & - } -} - -mk_dir() { - EXEC=" - mkdir -p \"$1\"; - chown ${TUSER}.${TGROUP} $1 || echo \"Failed to set owner -${TUSER}- for -$1-.\" >/dev/tty0 2>&1; - chmod ${TMODE} $1 || echo \"Failed to set mode -${TMODE}- for -$1-.\" >/dev/tty0 2>&1 " - - test "$VOLATILE_ENABLE_CACHE" = yes && echo "$EXEC" >> /etc/volatile.cache - - [ -e "$1" ] && { - [ "${VERBOSE}" != "no" ] && echo "Target already exists. Skipping." - } || { - eval $EXEC & - } -} - -link_file() { - EXEC="test -e \"$2\" -o -L $2 || ln -s \"$1\" \"$2\" >/dev/tty0 2>&1" - - test "$VOLATILE_ENABLE_CACHE" = yes && echo " $EXEC" >> /etc/volatile.cache - - [ -e "$2" ] && { - echo "Cannot create link over existing -${TNAME}-." >&2 - } || { - eval $EXEC & - } -} - -check_requirements() { - - cleanup() { - rm "${TMP_INTERMED}" - rm "${TMP_DEFINED}" - rm "${TMP_COMBINED}" - } - - CFGFILE="$1" - - [ `basename "${CFGFILE}"` = "${COREDEF}" ] && return 0 - - TMP_INTERMED="${TMPROOT}/tmp.$$" - TMP_DEFINED="${TMPROOT}/tmpdefined.$$" - TMP_COMBINED="${TMPROOT}/tmpcombined.$$" - - - cat /etc/passwd | sed 's@\(^:\)*:.*@\1@' | sort | uniq > "${TMP_DEFINED}" - cat ${CFGFILE} | grep -v "^#" | cut -d " " -f 2 > "${TMP_INTERMED}" - cat "${TMP_DEFINED}" "${TMP_INTERMED}" | sort | uniq > "${TMP_COMBINED}" - - NR_DEFINED_USERS="`cat "${TMP_DEFINED}" | wc -l`" - NR_COMBINED_USERS="`cat "${TMP_COMBINED}" | wc -l`" - - [ "${NR_DEFINED_USERS}" -ne "${NR_COMBINED_USERS}" ] && { - echo "Undefined users:" - diff "${TMP_DEFINED}" "${TMP_COMBINED}" | grep "^>" - cleanup - return 1 - } - - - cat /etc/group | sed 's@\(^:\)*:.*@\1@' | sort | uniq > "${TMP_DEFINED}" - cat ${CFGFILE} | grep -v "^#" | cut -d " " -f 3 > "${TMP_INTERMED}" - cat "${TMP_DEFINED}" "${TMP_INTERMED}" | sort | uniq > "${TMP_COMBINED}" - - NR_DEFINED_GROUPS="`cat "${TMP_DEFINED}" | wc -l`" - NR_COMBINED_GROUPS="`cat "${TMP_COMBINED}" | wc -l`" - - [ "${NR_DEFINED_GROUPS}" -ne "${NR_COMBINED_GROUPS}" ] && { - echo "Undefined groups:" - diff "${TMP_DEFINED}" "${TMP_COMBINED}" | grep "^>" - cleanup - return 1 - } - - # Add checks for required directories here - - cleanup - return 0 - } - -apply_cfgfile() { - - CFGFILE="$1" - - check_requirements "${CFGFILE}" || { - echo "Skipping ${CFGFILE}" - return 1 - } - - cat ${CFGFILE} | grep -v "^#" | \ - while read LINE; do - - eval `echo "$LINE" | sed -n "s/\(.*\)\ \(.*\) \(.*\)\ \(.*\)\ \(.*\)\ \(.*\)/TTYPE=\1 ; TUSER=\2; TGROUP=\3; TMODE=\4; TNAME=\5 TLTARGET=\6/p"` - - [ "${VERBOSE}" != "no" ] && echo "Checking for -${TNAME}-." - - - [ "${TTYPE}" = "l" ] && { - TSOURCE="$TLTARGET" - [ -L "${TNAME}" ] || { - [ "${VERBOSE}" != "no" ] && echo "Creating link -${TNAME}- pointing to -${TSOURCE}-." - link_file "${TSOURCE}" "${TNAME}" & - } - continue - } - - [ -L "${TNAME}" ] && { - [ "${VERBOSE}" != "no" ] && echo "Found link." - NEWNAME=`ls -l "${TNAME}" | sed -e 's/^.*-> \(.*\)$/\1/'` - echo ${NEWNAME} | grep -v "^/" >/dev/null && { - TNAME="`echo ${TNAME} | sed -e 's@\(.*\)/.*@\1@'`/${NEWNAME}" - [ "${VERBOSE}" != "no" ] && echo "Converted relative linktarget to absolute path -${TNAME}-." - } || { - TNAME="${NEWNAME}" - [ "${VERBOSE}" != "no" ] && echo "Using absolute link target -${TNAME}-." - } - } - - case "${TTYPE}" in - "f") [ "${VERBOSE}" != "no" ] && echo "Creating file -${TNAME}-." - create_file "${TNAME}" & - ;; - "d") [ "${VERBOSE}" != "no" ] && echo "Creating directory -${TNAME}-." - mk_dir "${TNAME}" & - # Add check to see if there's an entry in fstab to mount. - ;; - *) [ "${VERBOSE}" != "no" ] && echo "Invalid type -${TTYPE}-." - continue - ;; - esac - - - done - - return 0 - - } - -clearcache=0 -exec 9&- - -if test -e /etc/volatile.cache -a "$VOLATILE_ENABLE_CACHE" = "yes" -a "x$1" != "xupdate" -a "x$clearcache" = "x0" -then - sh /etc/volatile.cache -else - rm -f /etc/volatile.cache - for file in `ls -1 "${CFGDIR}" | sort`; do - apply_cfgfile "${CFGDIR}/${file}" - done -fi - -if test -f /etc/ld.so.cache -a ! -f /var/run/ld.so.cache -then - ln -s /etc/ld.so.cache /var/run/ld.so.cache -fi diff --git a/meta/packages/initscripts/initscripts-1.0/reboot b/meta/packages/initscripts/initscripts-1.0/reboot deleted file mode 100755 index 4c55885ab..000000000 --- a/meta/packages/initscripts/initscripts-1.0/reboot +++ /dev/null @@ -1,15 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: reboot -# Required-Start: -# Required-Stop: -# Default-Start: -# Default-Stop: 6 -# Short-Description: Execute the reboot command. -# Description: -### END INIT INFO - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -echo -n "Rebooting... " -reboot -d -f -i diff --git a/meta/packages/initscripts/initscripts-1.0/rmnologin.sh b/meta/packages/initscripts/initscripts-1.0/rmnologin.sh deleted file mode 100755 index 417efc245..000000000 --- a/meta/packages/initscripts/initscripts-1.0/rmnologin.sh +++ /dev/null @@ -1,20 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: rmnologin -# Required-Start: $remote_fs $all -# Required-Stop: -# Default-Start: 2 3 4 5 -# Default-Stop: -# Short-Description: Remove /etc/nologin at boot -# Description: This script removes the /etc/nologin file as the -# last step in the boot process, if DELAYLOGIN=yes. -# If DELAYLOGIN=no, /etc/nologin was not created by -# bootmisc earlier in the boot process. -### END INIT INFO - -if test -f /etc/nologin.boot -then - rm -f /etc/nologin /etc/nologin.boot -fi - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/save-rtc.sh b/meta/packages/initscripts/initscripts-1.0/save-rtc.sh deleted file mode 100644 index 75e43001b..000000000 --- a/meta/packages/initscripts/initscripts-1.0/save-rtc.sh +++ /dev/null @@ -1,13 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: save-rtc -# Required-Start: -# Required-Stop: $local_fs hwclock -# Default-Start: S -# Default-Stop: 0 6 -# Short-Description: Store system clock into file -# Description: -### END INIT INFO - -# Update the timestamp -date +%Y%m%d%2H%2M > /etc/timestamp2 diff --git a/meta/packages/initscripts/initscripts-1.0/sendsigs b/meta/packages/initscripts/initscripts-1.0/sendsigs deleted file mode 100755 index 2b0f8f363..000000000 --- a/meta/packages/initscripts/initscripts-1.0/sendsigs +++ /dev/null @@ -1,21 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: sendsigs -# Required-Start: -# Required-Stop: umountnfs -# Default-Start: -# Default-Stop: 0 6 -# Short-Description: Kill all remaining processes. -# Description: -### END INIT INFO - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -# Kill all processes. -echo "Sending all processes the TERM signal..." -killall5 -15 -sleep 5 -echo "Sending all processes the KILL signal..." -killall5 -9 - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/single b/meta/packages/initscripts/initscripts-1.0/single deleted file mode 100755 index 0cad693f2..000000000 --- a/meta/packages/initscripts/initscripts-1.0/single +++ /dev/null @@ -1,24 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: single -# Required-Start: $local_fs $all killprocs -# Required-Stop: -# Default-Start: 1 -# Default-Stop: -# Short-Description: executed by init(8) upon entering runlevel 1 (single). -### END INIT INFO - -PATH="/sbin:/bin:/usr/sbin:/usr/bin" - -# Kill all processes. -echo "Sending all processes the TERM signal..." -killall5 -15 -sleep 5 -echo "Sending all processes the KILL signal..." -killall5 -9 - -# We start update here, since we just killed it. -test -x /sbin/update && update - -echo "Entering single-user mode..." -exec init -t1 S diff --git a/meta/packages/initscripts/initscripts-1.0/sysfs.sh b/meta/packages/initscripts/initscripts-1.0/sysfs.sh deleted file mode 100644 index be28bb35b..000000000 --- a/meta/packages/initscripts/initscripts-1.0/sysfs.sh +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: mountvirtfs -# Required-Start: -# Required-Stop: -# Default-Start: S -# Default-Stop: -# Short-Description: Mount kernel virtual file systems. -# Description: Mount initial set of virtual filesystems the kernel -# provides and that are required by everything. -### END INIT INFO - -if [ -e /proc ] && ! [ -e /proc/mounts ]; then - mount -t proc proc /proc -fi - -if [ -e /sys ] && grep -q sysfs /proc/filesystems; then - mount sysfs /sys -t sysfs -fi diff --git a/meta/packages/initscripts/initscripts-1.0/umountfs b/meta/packages/initscripts/initscripts-1.0/umountfs deleted file mode 100755 index 5c6793dc9..000000000 --- a/meta/packages/initscripts/initscripts-1.0/umountfs +++ /dev/null @@ -1,24 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: umountfs -# Required-Start: -# Required-Stop: -# Default-Start: -# Default-Stop: 0 6 -# Short-Description: Turn off swap and unmount all local file systems. -# Description: -### END INIT INFO - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -echo "Deactivating swap..." -swapoff -a - -# We leave /proc mounted. -echo "Unmounting local filesystems..." -mount -o remount,ro /mnt/ram -umount -f -a -r - -mount -o remount,ro / - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/umountnfs.sh b/meta/packages/initscripts/initscripts-1.0/umountnfs.sh deleted file mode 100755 index a4fb821d9..000000000 --- a/meta/packages/initscripts/initscripts-1.0/umountnfs.sh +++ /dev/null @@ -1,32 +0,0 @@ -### BEGIN INIT INFO -# Provides: umountnfs -# Required-Start: -# Required-Stop: umountfs -# Should-Stop: $network $portmap -# Default-Start: -# Default-Stop: 0 6 -# Short-Description: Unmount all network filesystems -### END INIT INFO - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -# Write a reboot record to /var/log/wtmp before unmounting -halt -w - -echo "Unmounting remote filesystems..." - -test -f /etc/fstab && ( - -# -# Read through fstab line by line and unount network file systems -# -while read device mountpt fstype options -do - if test "$fstype" = nfs || test "$fstype" = smbfs || test "$fstype" = ncpfs - then - umount -f $mountpt - fi -done -) < /etc/fstab - -: exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/urandom b/meta/packages/initscripts/initscripts-1.0/urandom deleted file mode 100755 index b6d807cf3..000000000 --- a/meta/packages/initscripts/initscripts-1.0/urandom +++ /dev/null @@ -1,46 +0,0 @@ -#! /bin/sh -### BEGIN INIT INFO -# Provides: urandom -# Required-Start: $local_fs mountvirtfs -# Required-Stop: $local_fs -# Default-Start: S -# Default-Stop: 0 6 -# Short-Description: Save and restore the random seed -# Description: Save the random seed on shutdown and restore it on boot, -# to ensure that the seed isn't predicable on startup -# (because the boot process is predictable) -### END INIT INFO - -test -c /dev/urandom || exit 0 -. /etc/default/rcS - -case "$1" in - start|"") - test "$VERBOSE" != no && echo "Initializing random number generator..." - # Load and then save 512 bytes, - # which is the size of the entropy pool - if test -f /var/lib/urandom/random-seed - then - cat /var/lib/urandom/random-seed >/dev/urandom - fi - rm -f /var/lib/urandom/random-seed - umask 077 - dd if=/dev/urandom of=/var/lib/urandom/random-seed count=1 \ - >/dev/null 2>&1 || echo "urandom start: failed." - umask 022 - ;; - stop) - # Carry a random seed from shut-down to start-up; - # see documentation in linux/drivers/char/random.c - test "$VERBOSE" != no && echo "Saving random seed..." - umask 077 - dd if=/dev/urandom of=/var/lib/urandom/random-seed count=1 \ - >/dev/null 2>&1 || echo "urandom stop: failed." - ;; - *) - echo "Usage: urandom {start|stop}" >&2 - exit 1 - ;; -esac - -exit 0 diff --git a/meta/packages/initscripts/initscripts-1.0/volatiles b/meta/packages/initscripts/initscripts-1.0/volatiles deleted file mode 100644 index b2ae2794d..000000000 --- a/meta/packages/initscripts/initscripts-1.0/volatiles +++ /dev/null @@ -1,39 +0,0 @@ -# This configuration file lists filesystem objects that should get verified -# during startup and be created if missing. -# -# Every line must either be a comment starting with # -# or a definition of format: -# -# where the items are separated by whitespace ! -# -# : d|f|l : (d)irectory|(f)ile|(l)ink -# -# A linking example: -# l root root 0777 /var/test /tmp/testfile -# f root root 0644 /var/test none -# -# Understanding links: -# When populate-volatile is to verify/create a directory or file, it will first -# check it's existence. If a link is found to exist in the place of the target, -# the path of the target is replaced with the target the link points to. -# Thus, if a link is in the place to be verified, the object will be created -# in the place the link points to instead. -# This explains the order of "link before object" as in the example above, where -# a link will be created at /var/test pointing to /tmp/testfile and due to this -# link the file defined as /var/test will actually be created as /tmp/testfile. -d root root 0755 /var/volatile/cache none -d root root 1777 /var/volatile/lock none -d root root 0755 /var/volatile/log none -d root root 0755 /var/volatile/run none -d root root 1777 /var/volatile/tmp none -l root root 0755 /var/cache /var/volatile/cache -l root root 1777 /var/lock /var/volatile/lock -l root root 0755 /var/log /var/volatile/log -l root root 0755 /var/run /var/volatile/run -l root root 1777 /var/tmp /var/volatile/tmp -d root root 0755 /var/lock/subsys none -f root root 0664 /var/log/wtmp none -f root root 0664 /var/run/utmp none -l root root 0644 /etc/resolv.conf /var/run/resolv.conf -f root root 0644 /var/run/resolv.conf none - diff --git a/meta/packages/initscripts/initscripts_1.0.bb b/meta/packages/initscripts/initscripts_1.0.bb deleted file mode 100644 index 0d79b53a8..000000000 --- a/meta/packages/initscripts/initscripts_1.0.bb +++ /dev/null @@ -1,121 +0,0 @@ -DESCRIPTION = "SysV init scripts" -SECTION = "base" -PRIORITY = "required" -DEPENDS = "makedevs" -RDEPENDS = "makedevs" -LICENSE = "GPLv2" -PR = "r122" - -SRC_URI = "file://functions \ - file://halt \ - file://umountfs \ - file://devpts.sh \ - file://devpts \ - file://hostname.sh \ - file://mountall.sh \ - file://banner.sh \ - file://finish.sh \ - file://bootmisc.sh \ - file://mountnfs.sh \ - file://reboot \ - file://checkfs.sh \ - file://single \ - file://sendsigs \ - file://urandom \ - file://rmnologin.sh \ - file://checkroot.sh \ - file://umountnfs.sh \ - file://sysfs.sh \ - file://device_table.txt \ - file://populate-volatile.sh \ - file://volatiles \ - file://save-rtc.sh" - -SRC_URI_append_arm = " file://alignment.sh" - -KERNEL_VERSION = "" - -do_install () { -# -# Create directories and install device independent scripts -# - install -d ${D}${sysconfdir}/init.d - install -d ${D}${sysconfdir}/rcS.d - install -d ${D}${sysconfdir}/rc0.d - install -d ${D}${sysconfdir}/rc1.d - install -d ${D}${sysconfdir}/rc2.d - install -d ${D}${sysconfdir}/rc3.d - install -d ${D}${sysconfdir}/rc4.d - install -d ${D}${sysconfdir}/rc5.d - install -d ${D}${sysconfdir}/rc6.d - install -d ${D}${sysconfdir}/default - install -d ${D}${sysconfdir}/default/volatiles - - install -m 0644 ${WORKDIR}/functions ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/bootmisc.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/checkroot.sh ${D}${sysconfdir}/init.d -# install -m 0755 ${WORKDIR}/finish.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/halt ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/hostname.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/mountall.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/mountnfs.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/reboot ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/rmnologin.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/sendsigs ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/single ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/umountnfs.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/urandom ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/devpts.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/devpts ${D}${sysconfdir}/default - install -m 0755 ${WORKDIR}/sysfs.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/populate-volatile.sh ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/save-rtc.sh ${D}${sysconfdir}/init.d - install -m 0644 ${WORKDIR}/volatiles ${D}${sysconfdir}/default/volatiles/00_core - if [ "${TARGET_ARCH}" = "arm" ]; then - install -m 0755 ${WORKDIR}/alignment.sh ${D}${sysconfdir}/init.d - fi -# -# Install device dependent scripts -# - install -m 0755 ${WORKDIR}/banner.sh ${D}${sysconfdir}/init.d/banner.sh - install -m 0755 ${WORKDIR}/umountfs ${D}${sysconfdir}/init.d/umountfs -# -# Create runlevel links -# - ln -sf ../init.d/rmnologin.sh ${D}${sysconfdir}/rc2.d/S99rmnologin.sh - ln -sf ../init.d/rmnologin.sh ${D}${sysconfdir}/rc3.d/S99rmnologin.sh - ln -sf ../init.d/rmnologin.sh ${D}${sysconfdir}/rc4.d/S99rmnologin.sh - ln -sf ../init.d/rmnologin.sh ${D}${sysconfdir}/rc5.d/S99rmnologin.sh - ln -sf ../init.d/sendsigs ${D}${sysconfdir}/rc6.d/S20sendsigs -# ln -sf ../init.d/urandom ${D}${sysconfdir}/rc6.d/S30urandom - ln -sf ../init.d/umountnfs.sh ${D}${sysconfdir}/rc6.d/S31umountnfs.sh - ln -sf ../init.d/umountfs ${D}${sysconfdir}/rc6.d/S40umountfs - # udev will run at S55 if installed - ln -sf ../init.d/reboot ${D}${sysconfdir}/rc6.d/S90reboot - ln -sf ../init.d/sendsigs ${D}${sysconfdir}/rc0.d/S20sendsigs -# ln -sf ../init.d/urandom ${D}${sysconfdir}/rc0.d/S30urandom - ln -sf ../init.d/umountnfs.sh ${D}${sysconfdir}/rc0.d/S31umountnfs.sh - ln -sf ../init.d/umountfs ${D}${sysconfdir}/rc0.d/S40umountfs - # udev will run at S55 if installed - ln -sf ../init.d/halt ${D}${sysconfdir}/rc0.d/S90halt - ln -sf ../init.d/save-rtc.sh ${D}${sysconfdir}/rc0.d/S25save-rtc.sh - ln -sf ../init.d/save-rtc.sh ${D}${sysconfdir}/rc6.d/S25save-rtc.sh - ln -sf ../init.d/banner.sh ${D}${sysconfdir}/rcS.d/S02banner.sh - ln -sf ../init.d/checkroot.sh ${D}${sysconfdir}/rcS.d/S10checkroot.sh -# ln -sf ../init.d/checkfs.sh ${D}${sysconfdir}/rcS.d/S30checkfs.sh - ln -sf ../init.d/mountall.sh ${D}${sysconfdir}/rcS.d/S35mountall.sh - ln -sf ../init.d/hostname.sh ${D}${sysconfdir}/rcS.d/S39hostname.sh - ln -sf ../init.d/mountnfs.sh ${D}${sysconfdir}/rcS.d/S45mountnfs.sh - ln -sf ../init.d/bootmisc.sh ${D}${sysconfdir}/rcS.d/S55bootmisc.sh -# ln -sf ../init.d/urandom ${D}${sysconfdir}/rcS.d/S55urandom -# ln -sf ../init.d/finish.sh ${D}${sysconfdir}/rcS.d/S99finish.sh - # udev will run at S04 if installed - ln -sf ../init.d/sysfs.sh ${D}${sysconfdir}/rcS.d/S03sysfs.sh - ln -sf ../init.d/populate-volatile.sh ${D}${sysconfdir}/rcS.d/S37populate-volatile.sh - ln -sf ../init.d/devpts.sh ${D}${sysconfdir}/rcS.d/S38devpts.sh - if [ "${TARGET_ARCH}" = "arm" ]; then - ln -sf ../init.d/alignment.sh ${D}${sysconfdir}/rcS.d/S06alignment.sh - fi - - install -m 0755 ${WORKDIR}/device_table.txt ${D}${sysconfdir}/device_table -} -- cgit v1.2.3