From 0adc74b06210f1be01145a5977a36b83aca0aa68 Mon Sep 17 00:00:00 2001 From: Marcin Juszkiewicz Date: Mon, 27 Apr 2009 16:41:24 +0200 Subject: beagleboard: added 2.6.29 kernel from OE tested on B7 Signed-off-by: Marcin Juszkiewicz --- .../0001-ASoC-Add-support-for-OMAP3-EVM.patch | 206 + ...es-Steve-Kipisz-USB-EHCI-support.-He-star.patch | 146 + ...add-regulator-info-to-get-the-microSD-slo.patch | 90 + .../0124-leds-gpio-broken-with-current-git.patch | 79 + .../linux-omap-2.6.29/ads7846-detection.patch | 41 + .../beagleboard/beagle-asoc.patch | 35 + .../linux/linux-omap-2.6.29/beagleboard/defconfig | 2269 + .../linux/linux-omap-2.6.29/beagleboard/ehci.patch | 131 + .../beagleboard/logo_linux_clut224.ppm | 73147 +++++++++++++++++++ .../linux-omap-2.6.29/cache-display-fix.patch | 238 + ...t-gro-Fix-legacy-path-napi_complete-crash.patch | 39 + ...002-OMAPFB-move-omapfb.h-to-include-linux.patch | 1316 + ...003-DSS2-OMAP2-3-Display-Subsystem-driver.patch | 14450 ++++ .../dss2/0004-DSS2-OMAP-framebuffer-driver.patch | 3403 + .../dss2/0005-DSS2-Add-panel-drivers.patch | 396 + .../0006-DSS2-HACK-Add-DSS2-support-for-N800.patch | 1079 + ...Add-DSS2-support-for-SDP-Beagle-Overo-EVM.patch | 5715 ++ ...unction-to-display-object-to-get-the-back.patch | 39 + .../dss2/0009-DSS2-Add-acx565akm-panel.patch | 778 + ...2-Small-VRFB-context-allocation-bug-fixed.patch | 28 + ...-Allocated-memory-for-Color-Look-up-table.patch | 37 + .../dss2/0012-DSS2-Fix-DMA-rotation.patch | 65 + .../0013-DSS2-Verify-that-overlay-paddr-0.patch | 41 + ...-Add-function-to-get-DSS-logic-clock-rate.patch | 51 + ...-DSS2-DSI-calculate-VP_CLK_RATIO-properly.patch | 68 + ...6-DSS2-DSI-improve-packet-len-calculation.patch | 58 + ...2-Disable-video-planes-on-sync-lost-error.patch | 103 + ...S2-check-for-ovl-paddr-only-when-enabling.patch | 40 + ...-fclk-limits-when-configuring-video-plane.patch | 183 + ...heck-scaling-limits-against-proper-values.patch | 79 + .../dss2/0021-DSS2-Add-venc-register-dump.patch | 96 + .../0022-DSS2-FB-remove-unused-var-warning.patch | 27 + ...the-default-FB-color-format-through-board.patch | 214 + .../dss2/0024-DSS2-Beagle-Use-gpio_set_value.patch | 48 + ...-Macro-for-calculating-base-address-of-th.patch | 28 + ...I-sidlemode-to-noidle-while-sending-frame.patch | 78 + ...2-VRFB-rotation-and-mirroring-implemented.patch | 324 + ...FB-Added-support-for-the-YUV-VRFB-rotatio.patch | 236 + ...FB-Set-line_length-correctly-for-YUV-with.patch | 61 + ..._get_trans_key-was-returning-wrong-key-ty.patch | 29 + ...2-do-bootmem-reserve-for-exclusive-access.patch | 33 + ...DSS2-Fix-DISPC_VID_FIR-value-for-omap34xx.patch | 35 + .../dss2/0033-DSS2-Prefer-3-tap-filter.patch | 82 + ...34-DSS2-VRAM-improve-omap_vram_add_region.patch | 135 + ...-the-function-pointer-for-getting-default.patch | 66 + ...-support-for-setting-and-querying-alpha-b.patch | 118 + ...2-Added-support-for-querying-color-keying.patch | 150 + ...B-Some-color-keying-pointerd-renamed-in-D.patch | 56 + ...ysfs-entry-to-for-the-alpha-blending-supp.patch | 59 + ...ded-proper-exclusion-for-destination-colo.patch | 97 + ...S2-Disable-vertical-offset-with-fieldmode.patch | 71 + ...DSS2-Don-t-enable-fieldmode-automatically.patch | 34 + ...3-DSS2-Swap-field-0-and-field-1-registers.patch | 170 + ...dd-sysfs-entry-for-seting-the-rotate-type.patch | 76 + .../0045-DSS2-Fixed-line-endings-from-to.patch | 48 + ...-DSI-decrease-sync-timeout-from-60s-to-2s.patch | 26 + ...eturn-value-for-rotate_type-sysfs-functio.patch | 44 + ...3-DMA-implement-trans-copy-and-const-fill.patch | 123 + ...9-DSS2-VRAM-clear-allocated-area-with-DMA.patch | 101 + .../0050-DSS2-OMAPFB-remove-fb-clearing-code.patch | 53 + .../0051-DSS2-VRAM-use-debugfs-not-procfs.patch | 170 + ...52-DSS2-VRAM-fix-section-mismatch-warning.patch | 34 + ...S2-disable-LCD-DIGIT-before-resetting-DSS.patch | 41 + meta/packages/linux/linux-omap-2.6.29/ehci.patch | 0 .../linux/linux-omap-2.6.29/evm-mcspi-ts.diff | 132 + .../linux-omap-2.6.29/fix-audio-capture.patch | 16 + .../linux/linux-omap-2.6.29/fix-install.patch | 23 + .../linux-omap-2.6.29/fix-unaligned-access.diff | 41 + ...base-address-definitions-and-resources-fo.patch | 153 + ...1-omap-iommu-tlb-and-pagetable-primitives.patch | 1226 + ...mmu-omap2-architecture-specific-functions.patch | 453 + ...map-iommu-omap3-iommu-device-registration.patch | 124 + ...u-simple-virtual-address-space-management.patch | 1083 + ...ap-iommu-entries-for-Kconfig-and-Makefile.patch | 45 + ...-omap-iommu-Don-t-try-BUG_ON-in_interrupt.patch | 26 + ...u-We-support-chained-scatterlists-probabl.patch | 24 + ...p2-iommu-entries-for-Kconfig-and-Makefile.patch | 29 + ...dd-ISP-main-driver-and-register-definitio.patch | 4625 ++ .../0002-omap3isp-Add-ISP-MMU-wrapper.patch | 209 + .../0003-omap3isp-Add-userspace-header.patch | 696 + .../0004-omap3isp-Add-ISP-frontend-CCDC.patch | 1875 + ...0005-omap3isp-Add-ISP-backend-PRV-and-RSZ.patch | 3413 + ...Add-statistics-collection-modules-H3A-and.patch | 2741 + .../0007-omap3isp-Add-CSI2-interface-support.patch | 2384 + .../omap3camera/0008-omap3isp-Add-ISP-tables.patch | 4018 + .../0009-omap34xxcam-Add-camera-driver.patch | 2249 + ...izer-and-Previewer-driver-added-to-commit.patch | 2915 + ...Resizer-bug-fixes-on-top-of-1.0.2-release.patch | 730 + .../v4l/0001-V4L2-Add-COLORFX-user-control.patch | 44 + ...f-v4l2_int_device_try_attach_all-requires.patch | 50 + .../isp/v4l/0003-V4L-Int-if-Dummy-slave.patch | 61 + ...t-device-add-support-for-VIDIOC_QUERYMENU.patch | 33 + .../0005-V4L-Int-if-Add-vidioc_int_querycap.patch | 35 + .../linux-omap-2.6.29/make-alignment-visible.diff | 26 + .../linux/linux-omap-2.6.29/mmctiming.patch | 16 + .../linux/linux-omap-2.6.29/modedb-hd720.patch | 13 + ...-USB-musb-only-turn-off-vbus-in-OTG-hosts.patch | 43 + ...B-composite-avoid-inconsistent-lock-state.patch | 76 + ...sb-NAK-timeout-scheme-on-bulk-RX-endpoint.patch | 218 + ...rewrite-host-periodic-endpoint-allocation.patch | 106 + ...isable-VUSB-regulators-when-cable-unplugg.patch | 181 + ...t-composite-device-level-suspend-resume-h.patch | 84 + ...dget-fix-ethernet-link-reports-to-ethtool.patch | 47 + ...sb-musb_host-minor-enqueue-locking-fix-v2.patch | 60 + .../0009-usb-musb_host-fix-ep0-fifo-flushing.patch | 93 + ...b-sanitize-clearing-TXCSR-DMA-bits-take-2.patch | 361 + .../0011-musb-fix-isochronous-TXDMA-take-2.patch | 417 + ...12-musb-fix-possible-panic-while-resuming.patch | 56 + ...usb_host-refactor-musb_save_toggle-take-2.patch | 91 + ...get-suppress-parasitic-TX-interrupts-with.patch | 32 + ...musb_gadget-fix-unhandled-endpoint-0-IRQs.patch | 202 + ...musb_host-factor-out-musb_ep_-get-set-_qh.patch | 146 + .../0017-musb_host-refactor-URB-giveback.patch | 132 + ...018-musb-split-out-CPPI-interrupt-handler.patch | 167 + ...9-musb_host-simplify-check-for-active-URB.patch | 158 + ...sb_host-streamline-musb_cleanup_urb-calls.patch | 58 + ...1-twl4030-usb-fix-minor-reporting-goofage.patch | 70 + ...dma-mode-1-for-TX-if-transfer-size-equals.patch | 38 + .../0023-musb-add-high-bandwidth-ISO-support.patch | 187 + .../0024-USB-otg-adding-nop-usb-transceiver.patch | 259 + ...-usb-xceiv-behave-when-linked-as-a-module.patch | 90 + ...musb-proper-hookup-to-transceiver-drivers.patch | 1109 + .../musb/0027-musb-otg-timer-cleanup.patch | 198 + ...-musb-make-initial-HNP-roleswitch-work-v2.patch | 133 + ...b-support-disconnect-after-HNP-roleswitch.patch | 145 + .../linux-omap-2.6.29/no-cortex-deadlock.patch | 77 + .../no-empty-flash-warnings.patch | 15 + .../linux/linux-omap-2.6.29/no-harry-potter.diff | 11 + .../linux/linux-omap-2.6.29/omap-2430-lcd.patch | 11 + .../linux/linux-omap-2.6.29/omap1710h3/defconfig | 1224 + .../linux/linux-omap-2.6.29/omap2420h4/defconfig | 1119 + .../linux/linux-omap-2.6.29/omap2430sdp/defconfig | 1303 + .../linux-omap-2.6.29/omap3-pandora/defconfig | 2186 + .../linux/linux-omap-2.6.29/omap3evm/defconfig | 2197 + .../linux-omap-2.6.29/omap3evm/omap3evm-dss2.diff | 443 + .../omap3evm/omap3evm-lcd-redtint.diff | 66 + .../linux/linux-omap-2.6.29/omap5912osk/defconfig | 1098 + .../linux/linux-omap-2.6.29/omapzoom/defconfig | 1951 + .../linux/linux-omap-2.6.29/overo/defconfig | 2248 + .../linux/linux-omap-2.6.29/overo/ehci.patch | 113 + .../linux/linux-omap-2.6.29/read_die_ids.patch | 23 + .../linux-omap-2.6.29/timer-suppression.patch | 43 + .../linux/linux-omap-2.6.29/touchscreen.patch | 22 + .../linux/linux-omap-2.6.29/usbttyfix.patch | 29 + meta/packages/linux/linux-omap_2.6.29.bb | 159 + 145 files changed, 156116 insertions(+) create mode 100644 meta/packages/linux/linux-omap-2.6.29/0001-ASoC-Add-support-for-OMAP3-EVM.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/0001-This-merges-Steve-Kipisz-USB-EHCI-support.-He-star.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/0001-board-ldp-add-regulator-info-to-get-the-microSD-slo.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/0124-leds-gpio-broken-with-current-git.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/ads7846-detection.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/beagleboard/beagle-asoc.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/beagleboard/defconfig create mode 100644 meta/packages/linux/linux-omap-2.6.29/beagleboard/ehci.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/beagleboard/logo_linux_clut224.ppm create mode 100644 meta/packages/linux/linux-omap-2.6.29/cache-display-fix.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0001-Revert-gro-Fix-legacy-path-napi_complete-crash.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0002-OMAPFB-move-omapfb.h-to-include-linux.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0003-DSS2-OMAP2-3-Display-Subsystem-driver.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0004-DSS2-OMAP-framebuffer-driver.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0005-DSS2-Add-panel-drivers.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0006-DSS2-HACK-Add-DSS2-support-for-N800.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0007-DSS2-Add-DSS2-support-for-SDP-Beagle-Overo-EVM.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0008-DSS2-Add-function-to-display-object-to-get-the-back.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0009-DSS2-Add-acx565akm-panel.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0010-DSS2-Small-VRFB-context-allocation-bug-fixed.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0011-DSS2-Allocated-memory-for-Color-Look-up-table.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0012-DSS2-Fix-DMA-rotation.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0013-DSS2-Verify-that-overlay-paddr-0.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0014-DSS2-Add-function-to-get-DSS-logic-clock-rate.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0015-DSS2-DSI-calculate-VP_CLK_RATIO-properly.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0016-DSS2-DSI-improve-packet-len-calculation.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0017-DSS2-Disable-video-planes-on-sync-lost-error.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0018-DSS2-check-for-ovl-paddr-only-when-enabling.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0019-DSS2-Check-fclk-limits-when-configuring-video-plane.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0020-DSS2-Check-scaling-limits-against-proper-values.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0021-DSS2-Add-venc-register-dump.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0022-DSS2-FB-remove-unused-var-warning.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0023-DSS2-pass-the-default-FB-color-format-through-board.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0024-DSS2-Beagle-Use-gpio_set_value.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0025-DSS2-VRFB-Macro-for-calculating-base-address-of-th.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0026-DSS2-DSI-sidlemode-to-noidle-while-sending-frame.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0027-DSS2-VRFB-rotation-and-mirroring-implemented.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0028-DSS2-OMAPFB-Added-support-for-the-YUV-VRFB-rotatio.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0029-DSS2-OMAPFB-Set-line_length-correctly-for-YUV-with.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0030-DSS2-dispc_get_trans_key-was-returning-wrong-key-ty.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0031-DSS2-do-bootmem-reserve-for-exclusive-access.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0032-DSS2-Fix-DISPC_VID_FIR-value-for-omap34xx.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0033-DSS2-Prefer-3-tap-filter.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0034-DSS2-VRAM-improve-omap_vram_add_region.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0035-DSS2-Added-the-function-pointer-for-getting-default.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0036-DSS2-Added-support-for-setting-and-querying-alpha-b.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0037-DSS2-Added-support-for-querying-color-keying.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0038-DSS2-OMAPFB-Some-color-keying-pointerd-renamed-in-D.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0039-DSS2-Add-sysfs-entry-to-for-the-alpha-blending-supp.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0040-DSS2-Provided-proper-exclusion-for-destination-colo.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0041-DSS2-Disable-vertical-offset-with-fieldmode.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0042-DSS2-Don-t-enable-fieldmode-automatically.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0043-DSS2-Swap-field-0-and-field-1-registers.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0044-DSS2-add-sysfs-entry-for-seting-the-rotate-type.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0045-DSS2-Fixed-line-endings-from-to.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0046-DSS2-DSI-decrease-sync-timeout-from-60s-to-2s.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0047-DSS2-fix-return-value-for-rotate_type-sysfs-functio.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0048-OMAP2-3-DMA-implement-trans-copy-and-const-fill.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0049-DSS2-VRAM-clear-allocated-area-with-DMA.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0050-DSS2-OMAPFB-remove-fb-clearing-code.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0051-DSS2-VRAM-use-debugfs-not-procfs.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0052-DSS2-VRAM-fix-section-mismatch-warning.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/dss2/0053-DSS2-disable-LCD-DIGIT-before-resetting-DSS.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/ehci.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/evm-mcspi-ts.diff create mode 100644 meta/packages/linux/linux-omap-2.6.29/fix-audio-capture.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/fix-install.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/fix-unaligned-access.diff create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/base/0001-omap3-Add-base-address-definitions-and-resources-fo.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/iommu/0001-omap-iommu-tlb-and-pagetable-primitives.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/iommu/0002-omap-iommu-omap2-architecture-specific-functions.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/iommu/0003-omap-iommu-omap3-iommu-device-registration.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/iommu/0004-omap-iommu-simple-virtual-address-space-management.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/iommu/0005-omap-iommu-entries-for-Kconfig-and-Makefile.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/iommu/0006-omap-iommu-Don-t-try-BUG_ON-in_interrupt.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/iommu/0007-omap-iommu-We-support-chained-scatterlists-probabl.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/iommu/0008-omap2-iommu-entries-for-Kconfig-and-Makefile.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0001-omap3isp-Add-ISP-main-driver-and-register-definitio.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0002-omap3isp-Add-ISP-MMU-wrapper.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0003-omap3isp-Add-userspace-header.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0004-omap3isp-Add-ISP-frontend-CCDC.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0005-omap3isp-Add-ISP-backend-PRV-and-RSZ.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0006-omap3isp-Add-statistics-collection-modules-H3A-and.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0007-omap3isp-Add-CSI2-interface-support.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0008-omap3isp-Add-ISP-tables.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0009-omap34xxcam-Add-camera-driver.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/standalone/0001-Resizer-and-Previewer-driver-added-to-commit.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/standalone/0002-Resizer-bug-fixes-on-top-of-1.0.2-release.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/v4l/0001-V4L2-Add-COLORFX-user-control.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/v4l/0002-V4L-Int-if-v4l2_int_device_try_attach_all-requires.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/v4l/0003-V4L-Int-if-Dummy-slave.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/v4l/0004-V4L-int-device-add-support-for-VIDIOC_QUERYMENU.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/isp/v4l/0005-V4L-Int-if-Add-vidioc_int_querycap.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/make-alignment-visible.diff create mode 100644 meta/packages/linux/linux-omap-2.6.29/mmctiming.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/modedb-hd720.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0001-USB-musb-only-turn-off-vbus-in-OTG-hosts.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0002-USB-composite-avoid-inconsistent-lock-state.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0003-USB-musb-NAK-timeout-scheme-on-bulk-RX-endpoint.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0004-USB-musb-rewrite-host-periodic-endpoint-allocation.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0005-USB-TWL-disable-VUSB-regulators-when-cable-unplugg.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0006-USB-gadget-composite-device-level-suspend-resume-h.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0007-usb-gadget-fix-ethernet-link-reports-to-ethtool.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0008-usb-musb_host-minor-enqueue-locking-fix-v2.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0009-usb-musb_host-fix-ep0-fifo-flushing.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0010-musb-sanitize-clearing-TXCSR-DMA-bits-take-2.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0011-musb-fix-isochronous-TXDMA-take-2.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0012-musb-fix-possible-panic-while-resuming.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0013-musb_host-refactor-musb_save_toggle-take-2.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0014-musb_gadget-suppress-parasitic-TX-interrupts-with.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0015-musb_gadget-fix-unhandled-endpoint-0-IRQs.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0016-musb_host-factor-out-musb_ep_-get-set-_qh.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0017-musb_host-refactor-URB-giveback.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0018-musb-split-out-CPPI-interrupt-handler.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0019-musb_host-simplify-check-for-active-URB.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0020-musb_host-streamline-musb_cleanup_urb-calls.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0021-twl4030-usb-fix-minor-reporting-goofage.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0022-musb-use-dma-mode-1-for-TX-if-transfer-size-equals.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0023-musb-add-high-bandwidth-ISO-support.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0024-USB-otg-adding-nop-usb-transceiver.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0025-nop-usb-xceiv-behave-when-linked-as-a-module.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0026-musb-proper-hookup-to-transceiver-drivers.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0027-musb-otg-timer-cleanup.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0028-musb-make-initial-HNP-roleswitch-work-v2.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/musb/0029-musb-support-disconnect-after-HNP-roleswitch.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/no-cortex-deadlock.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/no-empty-flash-warnings.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/no-harry-potter.diff create mode 100644 meta/packages/linux/linux-omap-2.6.29/omap-2430-lcd.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/omap1710h3/defconfig create mode 100644 meta/packages/linux/linux-omap-2.6.29/omap2420h4/defconfig create mode 100644 meta/packages/linux/linux-omap-2.6.29/omap2430sdp/defconfig create mode 100644 meta/packages/linux/linux-omap-2.6.29/omap3-pandora/defconfig create mode 100644 meta/packages/linux/linux-omap-2.6.29/omap3evm/defconfig create mode 100644 meta/packages/linux/linux-omap-2.6.29/omap3evm/omap3evm-dss2.diff create mode 100644 meta/packages/linux/linux-omap-2.6.29/omap3evm/omap3evm-lcd-redtint.diff create mode 100644 meta/packages/linux/linux-omap-2.6.29/omap5912osk/defconfig create mode 100644 meta/packages/linux/linux-omap-2.6.29/omapzoom/defconfig create mode 100644 meta/packages/linux/linux-omap-2.6.29/overo/defconfig create mode 100644 meta/packages/linux/linux-omap-2.6.29/overo/ehci.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/read_die_ids.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/timer-suppression.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/touchscreen.patch create mode 100644 meta/packages/linux/linux-omap-2.6.29/usbttyfix.patch create mode 100644 meta/packages/linux/linux-omap_2.6.29.bb (limited to 'meta/packages/linux') diff --git a/meta/packages/linux/linux-omap-2.6.29/0001-ASoC-Add-support-for-OMAP3-EVM.patch b/meta/packages/linux/linux-omap-2.6.29/0001-ASoC-Add-support-for-OMAP3-EVM.patch new file mode 100644 index 000000000..a76e96e44 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/0001-ASoC-Add-support-for-OMAP3-EVM.patch @@ -0,0 +1,206 @@ +From c1dad0b6b434300ae64c902d11611c54c513ea10 Mon Sep 17 00:00:00 2001 +From: Anuj Aggarwal +Date: Fri, 21 Nov 2008 17:41:03 +0530 +Subject: [PATCH] ASoC: Add support for OMAP3 EVM + +This patch adds ALSA SoC support for OMAP3 EVM using TWL4030 audio codec. + +Signed-off-by: Anuj Aggarwal +--- + sound/soc/omap/Kconfig | 8 +++ + sound/soc/omap/Makefile | 3 +- + sound/soc/omap/omap3evm.c | 147 +++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 157 insertions(+), 1 deletions(-) + create mode 100644 sound/soc/omap/omap3evm.c + +diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig +index 0daeee4..deb6ba9 100644 +--- a/sound/soc/omap/Kconfig ++++ b/sound/soc/omap/Kconfig +@@ -22,6 +22,14 @@ config SND_OMAP_SOC_OMAP3_BEAGLE + help + Say Y if you want to add support for SoC audio on the Beagleboard. + ++config SND_OMAP_SOC_OMAP3EVM ++ tristate "SoC Audio support for OMAP3EVM board" ++ depends on SND_OMAP_SOC && MACH_OMAP3EVM ++ select SND_OMAP_SOC_MCBSP ++ select SND_SOC_TWL4030 ++ help ++ Say Y if you want to add support for SoC audio on the omap3evm board. ++ + config SND_OMAP_SOC_OSK5912 + tristate "SoC Audio support for omap osk5912" + depends on SND_OMAP_SOC && MACH_OMAP_OSK +diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile +index 4bae404..ef31c25 100644 +--- a/sound/soc/omap/Makefile ++++ b/sound/soc/omap/Makefile +@@ -10,9 +10,10 @@ snd-soc-n810-objs := n810.o + snd-soc-omap3beagle-objs := omap3beagle.o + snd-soc-osk5912-objs := osk5912.o + snd-soc-overo-objs := overo.o ++snd-soc-omap3evm-objs := omap3evm.o + + obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o + obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o + obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o + obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o +- ++obj-$(CONFIG_MACH_OMAP3EVM) += snd-soc-omap3evm.o +diff --git a/sound/soc/omap/omap3evm.c b/sound/soc/omap/omap3evm.c +new file mode 100644 +index 0000000..570af55 +--- /dev/null ++++ b/sound/soc/omap/omap3evm.c +@@ -0,0 +1,147 @@ ++/* ++ * omap3evm.c -- ALSA SoC support for OMAP3 EVM ++ * ++ * Author: Anuj Aggarwal ++ * ++ * Based on sound/soc/omap/beagle.c by Steve Sakoman ++ * ++ * Copyright (C) 2008 Texas Instruments, Incorporated ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation version 2. ++ * ++ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, ++ * whether express or implied; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "omap-mcbsp.h" ++#include "omap-pcm.h" ++#include "../codecs/twl4030.h" ++ ++static int omap3evm_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; ++ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; ++ int ret; ++ ++ /* Set codec DAI configuration */ ++ ret = snd_soc_dai_set_fmt(codec_dai, ++ SND_SOC_DAIFMT_I2S | ++ SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM); ++ if (ret < 0) { ++ printk(KERN_ERR "can't set codec DAI configuration\n"); ++ return ret; ++ } ++ ++ /* Set cpu DAI configuration */ ++ ret = snd_soc_dai_set_fmt(cpu_dai, ++ SND_SOC_DAIFMT_I2S | ++ SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBM_CFM); ++ if (ret < 0) { ++ printk(KERN_ERR "can't set cpu DAI configuration\n"); ++ return ret; ++ } ++ ++ /* Set the codec system clock for DAC and ADC */ ++ ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000, ++ SND_SOC_CLOCK_IN); ++ if (ret < 0) { ++ printk(KERN_ERR "can't set codec system clock\n"); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static struct snd_soc_ops omap3evm_ops = { ++ .hw_params = omap3evm_hw_params, ++}; ++ ++/* Digital audio interface glue - connects codec <--> CPU */ ++static struct snd_soc_dai_link omap3evm_dai = { ++ .name = "TWL4030", ++ .stream_name = "TWL4030", ++ .cpu_dai = &omap_mcbsp_dai[0], ++ .codec_dai = &twl4030_dai, ++ .ops = &omap3evm_ops, ++}; ++ ++/* Audio machine driver */ ++static struct snd_soc_machine snd_soc_machine_omap3evm = { ++ .name = "omap3evm", ++ .dai_link = &omap3evm_dai, ++ .num_links = 1, ++}; ++ ++/* Audio subsystem */ ++static struct snd_soc_device omap3evm_snd_devdata = { ++ .machine = &snd_soc_machine_omap3evm, ++ .platform = &omap_soc_platform, ++ .codec_dev = &soc_codec_dev_twl4030, ++}; ++ ++static struct platform_device *omap3evm_snd_device; ++ ++static int __init omap3evm_soc_init(void) ++{ ++ int ret; ++ ++ if (!machine_is_omap3evm()) { ++ pr_debug("Not OMAP3 EVM!\n"); ++ return -ENODEV; ++ } ++ pr_info("OMAP3 EVM SoC init\n"); ++ ++ omap3evm_snd_device = platform_device_alloc("soc-audio", -1); ++ if (!omap3evm_snd_device) { ++ printk(KERN_ERR "Platform device allocation failed\n"); ++ return -ENOMEM; ++ } ++ ++ platform_set_drvdata(omap3evm_snd_device, &omap3evm_snd_devdata); ++ omap3evm_snd_devdata.dev = &omap3evm_snd_device->dev; ++ *(unsigned int *)omap3evm_dai.cpu_dai->private_data = 1; /* McBSP2 */ ++ ++ ret = platform_device_add(omap3evm_snd_device); ++ if (ret) ++ goto err1; ++ ++ return 0; ++ ++err1: ++ printk(KERN_ERR "Unable to add platform device\n"); ++ platform_device_put(omap3evm_snd_device); ++ ++ return ret; ++} ++ ++static void __exit omap3evm_soc_exit(void) ++{ ++ platform_device_unregister(omap3evm_snd_device); ++} ++ ++module_init(omap3evm_soc_init); ++module_exit(omap3evm_soc_exit); ++ ++MODULE_AUTHOR("Anuj Aggarwal "); ++MODULE_DESCRIPTION("ALSA SoC OMAP3 EVM"); ++MODULE_LICENSE("GPL"); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/0001-This-merges-Steve-Kipisz-USB-EHCI-support.-He-star.patch b/meta/packages/linux/linux-omap-2.6.29/0001-This-merges-Steve-Kipisz-USB-EHCI-support.-He-star.patch new file mode 100644 index 000000000..d590f8ffb --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/0001-This-merges-Steve-Kipisz-USB-EHCI-support.-He-star.patch @@ -0,0 +1,146 @@ +From f8f10f496bce396416d7156da876222c6ce8c341 Mon Sep 17 00:00:00 2001 +From: Steven Kipisz +Date: Wed, 9 Jan 2009 12:01:11 -0600 +Subject: [PATCH-USB] Omap3 beagleboard: add support for EHCI in revision C1 boards + +Signed-off-by: Jason Kridner +--- + arch/arm/mach-omap2/board-omap3beagle.c | 10 +--------- + arch/arm/mach-omap2/usb-ehci.c | 4 +--- + drivers/usb/host/ehci-omap.c | 26 ++++++++++++++++++++++++++ + 3 files changed, 28 insertions(+), 12 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index fe97bab..de81153 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -140,15 +140,7 @@ static int beagle_twl_gpio_setup(struct device *dev, + * power switch and overcurrent detect + */ + +- gpio_request(gpio + 1, "EHCI_nOC"); +- gpio_direction_input(gpio + 1); +- +- /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ +- gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); +- gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); +- +- /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ +- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; ++ /* TODO: This needs to be modified to not rely on u-boot */ + + return 0; + } +diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c +index 489439d..2c6305b 100644 +--- a/arch/arm/mach-omap2/usb-ehci.c ++++ b/arch/arm/mach-omap2/usb-ehci.c +@@ -152,9 +152,7 @@ static void setup_ehci_io_mux(void) + void __init usb_ehci_init(void) + { + #if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) +- /* Setup Pin IO MUX for EHCI */ +- if (cpu_is_omap34xx()) +- setup_ehci_io_mux(); ++ /* TODO: Setup Pin IO MUX for EHCI - moved this temporarily to U-boot */ + + if (platform_device_register(&ehci_device) < 0) { + printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); + +diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c +index 1b3266c..8472996 100644 +--- a/drivers/usb/host/ehci-omap.c ++++ b/drivers/usb/host/ehci-omap.c +@@ -48,16 +48,26 @@ + * to get the PHY state machine in working state + */ + #define EXTERNAL_PHY_RESET ++#ifdef CONFIG_MACH_OMAP3_BEAGLE ++#define EXT_PHY_RESET_GPIO_PORT2 (147) ++#else + #define EXT_PHY_RESET_GPIO_PORT1 (57) + #define EXT_PHY_RESET_GPIO_PORT2 (61) ++#endif + #define EXT_PHY_RESET_DELAY (10) + ++#define PHY_STP_PULLUP_ENABLE (0x10) ++#define PHY_STP_PULLUP_DISABLE (0x90) ++ ++ + /* ISSUE2: + * USBHOST supports External charge pump PHYs only + * Use the VBUS from Port1 to power VBUS of Port2 externally + * So use Port2 as the working ULPI port + */ ++#ifndef CONFIG_MACH_OMAP3_BEAGLE + #define VBUS_INTERNAL_CHARGEPUMP_HACK ++#endif + + #endif /* CONFIG_OMAP_EHCI_PHY_MODE */ + +@@ -225,14 +235,43 @@ static int omap_start_ehc(struct platform_device *dev, struct usb_hcd *hcd) + + #ifdef EXTERNAL_PHY_RESET + /* Refer: ISSUE1 */ ++#ifndef CONFIG_MACH_OMAP3_BEAGLE + gpio_request(EXT_PHY_RESET_GPIO_PORT1, "USB1 PHY reset"); + gpio_direction_output(EXT_PHY_RESET_GPIO_PORT1, 0); ++#endif + gpio_request(EXT_PHY_RESET_GPIO_PORT2, "USB2 PHY reset"); + gpio_direction_output(EXT_PHY_RESET_GPIO_PORT2, 0); ++ gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 0); + /* Hold the PHY in RESET for enough time till DIR is high */ + udelay(EXT_PHY_RESET_DELAY); + #endif + ++ /* ++ * The PHY register 0x7 - Interface Control register is ++ * configured to disable the integrated STP pull-up resistor ++ * used for interface protection. ++ * ++ * May not need to be here. ++ */ ++ omap_writel((0x7 << EHCI_INSNREG05_ULPI_REGADD_SHIFT) |/* interface reg */ ++ (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) |/* Write */ ++ (1 << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) |/* Port1 */ ++ (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT) |/* Start */ ++ (PHY_STP_PULLUP_DISABLE), ++ EHCI_INSNREG05_ULPI); ++ ++ while (!(omap_readl(EHCI_INSNREG05_ULPI) & (1<usbtll_fck_clk = clk_get(&dev->dev, USBHOST_TLL_FCLK); + if (IS_ERR(ehci_clocks->usbtll_fck_clk)) +@@ -307,7 +346,9 @@ static int omap_start_ehc(struct platform_device *dev, struct usb_hcd *hcd) + * Hold the PHY in RESET for enough time till PHY is settled and ready + */ + udelay(EXT_PHY_RESET_DELAY); ++#ifndef CONFIG_MACH_OMAP3_BEAGLE + gpio_set_value(EXT_PHY_RESET_GPIO_PORT1, 1); ++#endif + gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 1); + #endif + +@@ -393,7 +434,9 @@ static void omap_stop_ehc(struct platform_device *dev, struct usb_hcd *hcd) + + + #ifdef EXTERNAL_PHY_RESET ++#ifndef CONFIG_MACH_OMAP3_BEAGLE + gpio_free(EXT_PHY_RESET_GPIO_PORT1); ++#endif + gpio_free(EXT_PHY_RESET_GPIO_PORT2); + #endif + +-- +1.6.0.4.790.gaa14a diff --git a/meta/packages/linux/linux-omap-2.6.29/0001-board-ldp-add-regulator-info-to-get-the-microSD-slo.patch b/meta/packages/linux/linux-omap-2.6.29/0001-board-ldp-add-regulator-info-to-get-the-microSD-slo.patch new file mode 100644 index 000000000..49045f7bb --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/0001-board-ldp-add-regulator-info-to-get-the-microSD-slo.patch @@ -0,0 +1,90 @@ +From 7efa7cc5b807cb840c62b5bf54bf47181c9b95a6 Mon Sep 17 00:00:00 2001 +From: Koen Kooi +Date: Mon, 30 Mar 2009 15:21:37 +0200 +Subject: [PATCH v2] ARM: OMAP: board-ldp: add regulator info to get the microSD slot working again + +The ldp board was left behind when other boards got updated. The ldp info was copied from the beagleboard board file and s/beagle/ldp/g + +Changes since v1: + * dropped vsim portion since only 4 pins are hooked up + +Signed-off-by: Koen Kooi +--- + arch/arm/mach-omap2/board-ldp.c | 32 ++++++++++++++++++++++++++++++++ + 1 files changed, 32 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c +index 30926b0..19a5c15 100644 +--- a/arch/arm/mach-omap2/board-ldp.c ++++ b/arch/arm/mach-omap2/board-ldp.c +@@ -22,6 +22,7 @@ + #include + #include + #include ++#include + #include + + #include +@@ -450,7 +451,16 @@ static struct twl4030_script *twl4030_scripts[] __initdata = { + &wrst_script, + }; + ++static const struct twl4030_resconfig ldp_resconfig[] = { ++ /* disable regulators that u-boot left enabled; the ++ * devices' drivers should be managing these. ++ */ ++ { .resource = RES_VMMC1, }, ++ { 0, }, ++}; ++ + static struct twl4030_power_data sdp3430_t2scripts_data __initdata = { ++ .resource_config = ldp_resconfig, + .scripts = twl4030_scripts, + .size = ARRAY_SIZE(twl4030_scripts), + }; +@@ -474,6 +484,25 @@ static struct twl4030_madc_platform_data ldp_madc_data = { + .irq_line = 1, + }; + ++static struct regulator_consumer_supply ldp_vmmc1_supply = { ++ .supply = "vmmc", ++}; ++ ++/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ ++static struct regulator_init_data ldp_vmmc1 = { ++ .constraints = { ++ .min_uV = 1850000, ++ .max_uV = 3150000, ++ .valid_modes_mask = REGULATOR_MODE_NORMAL ++ | REGULATOR_MODE_STANDBY, ++ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE ++ | REGULATOR_CHANGE_MODE ++ | REGULATOR_CHANGE_STATUS, ++ }, ++ .num_consumer_supplies = 1, ++ .consumer_supplies = &ldp_vmmc1_supply, ++}; ++ + static struct twl4030_platform_data ldp_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, +@@ -483,6 +512,7 @@ static struct twl4030_platform_data ldp_twldata = { + .madc = &ldp_madc_data, + .usb = &ldp_usb_data, + .power = &sdp3430_t2scripts_data, ++ .vmmc1 = &ldp_vmmc1, + .gpio = &ldp_gpio_data, + .keypad = &ldp_kp_twl4030_data, + }; +@@ -530,6 +560,8 @@ static void __init omap_ldp_init(void) + omap_serial_init(); + usb_musb_init(); + twl4030_mmc_init(mmc); ++ /* link regulators to MMC adapters */ ++ ldp_vmmc1_supply.dev = mmc[0].dev; + } + + static void __init omap_ldp_map_io(void) +-- +1.6.2 + diff --git a/meta/packages/linux/linux-omap-2.6.29/0124-leds-gpio-broken-with-current-git.patch b/meta/packages/linux/linux-omap-2.6.29/0124-leds-gpio-broken-with-current-git.patch new file mode 100644 index 000000000..dc6e190e8 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/0124-leds-gpio-broken-with-current-git.patch @@ -0,0 +1,79 @@ +From c810e850d830330cf04225a4cff8e981e153f269 Mon Sep 17 00:00:00 2001 +From: David Brownell +Date: Mon, 23 Feb 2009 14:08:14 -0800 +Subject: [PATCH 124/133] leds-gpio broken with current git? +MIME-Version: 1.0 +Content-Type: text/plain; charset=utf-8 +Content-Transfer-Encoding: 8bit + +On Monday 23 February 2009, David Brownell wrote: +> +> > Perhaps something broke with Tony's RC1 merge? +> > The LEDs are broken for me as well. +> +> Still works for me.  Did you maybe not enable the twl4030 +> GPIO support in Kconfig? + +Oh, and if you did *not*, please give this patch a try. +I've been meaning to test it. + +- Dave + +============== +Sometimes it's awkward to make sure that the array in the +platform_data handed to the leds-gpio driver has only valid +data ... some leds may not be always available, and coping +with that currently requires patching or rebuilding the array. + +This patch fixes that by making it be OK to pass an invalid +GPIO (such as "-EINVAL") ... such table entries are skipped. +--- + drivers/leds/leds-gpio.c | 12 +++++++++++- + 1 files changed, 11 insertions(+), 1 deletions(-) + +diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c +index b13bd29..83737e6 100644 +--- a/drivers/leds/leds-gpio.c ++++ b/drivers/leds/leds-gpio.c +@@ -90,13 +90,19 @@ static int gpio_led_probe(struct platform_device *pdev) + cur_led = &pdata->leds[i]; + led_dat = &leds_data[i]; + ++ /* skip leds that aren't available */ ++ led_dat->gpio = cur_led->gpio; ++ if (!gpio_is_valid(led_dat->gpio)) { ++ dev_dbg(&pdev->dev, "skipping %s\n", cur_led->name); ++ continue; ++ } ++ + ret = gpio_request(cur_led->gpio, cur_led->name); + if (ret < 0) + goto err; + + led_dat->cdev.name = cur_led->name; + led_dat->cdev.default_trigger = cur_led->default_trigger; +- led_dat->gpio = cur_led->gpio; + led_dat->can_sleep = gpio_cansleep(cur_led->gpio); + led_dat->active_low = cur_led->active_low; + if (pdata->gpio_blink_set) { +@@ -124,6 +130,8 @@ static int gpio_led_probe(struct platform_device *pdev) + err: + if (i > 0) { + for (i = i - 1; i >= 0; i--) { ++ if (!gpio_is_valid(leds_data[i].gpio)) ++ continue; + led_classdev_unregister(&leds_data[i].cdev); + cancel_work_sync(&leds_data[i].work); + gpio_free(leds_data[i].gpio); +@@ -144,6 +152,8 @@ static int __devexit gpio_led_remove(struct platform_device *pdev) + leds_data = platform_get_drvdata(pdev); + + for (i = 0; i < pdata->num_leds; i++) { ++ if (!gpio_is_valid(leds_data[i].gpio)) ++ continue; + led_classdev_unregister(&leds_data[i].cdev); + cancel_work_sync(&leds_data[i].work); + gpio_free(leds_data[i].gpio); +-- +1.6.0.4.790.gaa14a + diff --git a/meta/packages/linux/linux-omap-2.6.29/ads7846-detection.patch b/meta/packages/linux/linux-omap-2.6.29/ads7846-detection.patch new file mode 100644 index 000000000..25a1cb052 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/ads7846-detection.patch @@ -0,0 +1,41 @@ +diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c +index 2ae5ab8..a68b0a6 100644 +--- a/drivers/input/touchscreen/ads7846.c ++++ b/drivers/input/touchscreen/ads7846.c +@@ -1154,9 +1154,16 @@ static int __devinit ads7846_probe(struct spi_device *spi) + /* take a first sample, leaving nPENIRQ active and vREF off; avoid + * the touchscreen, in case it's not connected. + */ +- (void) ads7846_read12_ser(&spi->dev, ++ err = ads7846_read12_ser(&spi->dev, + READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON); + ++ /* if sample is all 0's or all 1's then there is no device on spi */ ++ if ( (err == 0x000) || (err == 0xfff)) { ++ dev_info(&spi->dev, "no device detected, test read result was 0x%08X\n", err); ++ err = -ENODEV; ++ goto err_free_irq; ++ } ++ + err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group); + if (err) + goto err_remove_hwmon; +@@ -1174,7 +1181,7 @@ static int __devinit ads7846_probe(struct spi_device *spi) + err_free_irq: + free_irq(spi->irq, ts); + err_free_gpio: +- if (ts->gpio_pendown != -1) ++ if (!ts->get_pendown_state && ts->gpio_pendown != -1) + gpio_free(ts->gpio_pendown); + err_cleanup_filter: + if (ts->filter_cleanup) +@@ -1201,7 +1208,7 @@ static int __devexit ads7846_remove(struct spi_device *spi) + /* suspend left the IRQ disabled */ + enable_irq(ts->spi->irq); + +- if (ts->gpio_pendown != -1) ++ if (!ts->get_pendown_state && ts->gpio_pendown != -1) + gpio_free(ts->gpio_pendown); + + if (ts->filter_cleanup) + diff --git a/meta/packages/linux/linux-omap-2.6.29/beagleboard/beagle-asoc.patch b/meta/packages/linux/linux-omap-2.6.29/beagleboard/beagle-asoc.patch new file mode 100644 index 000000000..b2b920037 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/beagleboard/beagle-asoc.patch @@ -0,0 +1,35 @@ +diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig +index 4f7f040..ccd8973 100644 +--- a/sound/soc/omap/Kconfig ++++ b/sound/soc/omap/Kconfig +@@ -55,3 +55,13 @@ config SND_OMAP_SOC_OMAP3_PANDORA + select SND_SOC_TWL4030 + help + Say Y if you want to add support for SoC audio on the OMAP3 Pandora. ++ ++config SND_OMAP_SOC_OMAP3_BEAGLE ++ tristate "SoC Audio support for OMAP3 Beagle" ++ depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_BEAGLE ++ select SND_OMAP_SOC_MCBSP ++ select SND_SOC_TWL4030 ++ help ++ Say Y if you want to add support for SoC audio on the Beagleboard. ++ ++ +diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile +index 76fedd9..0c9e4ac 100644 +--- a/sound/soc/omap/Makefile ++++ b/sound/soc/omap/Makefile +@@ -12,6 +12,7 @@ snd-soc-overo-objs := overo.o + snd-soc-omap2evm-objs := omap2evm.o + snd-soc-sdp3430-objs := sdp3430.o + snd-soc-omap3pandora-objs := omap3pandora.o ++snd-soc-omap3beagle-objs := omap3beagle.o + + obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o + obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o +@@ -19,3 +20,4 @@ obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o + obj-$(CONFIG_MACH_OMAP2EVM) += snd-soc-omap2evm.o + obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o + obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o ++obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o diff --git a/meta/packages/linux/linux-omap-2.6.29/beagleboard/defconfig b/meta/packages/linux/linux-omap-2.6.29/beagleboard/defconfig new file mode 100644 index 000000000..ef5e35c99 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/beagleboard/defconfig @@ -0,0 +1,2269 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-omap1 +# Tue Apr 7 18:11:42 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_SMARTREFLEX=y +# CONFIG_OMAP_SMARTREFLEX_TESTING is not set +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_BOOT_TAG=y +CONFIG_OMAP_BOOT_REASON=y +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_IOMMU is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_TICK_GPTIMER=12 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_OMAP3EVM is not set +CONFIG_MACH_OMAP3_BEAGLE=y +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3_PANDORA is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +CONFIG_CPU_FREQ_DEBUG=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y +# CONFIG_ARM_ERRATUM_451034 is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=y +CONFIG_BT_HCIBTSDIO=y +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=y +CONFIG_BT_HCIBPA10X=y +CONFIG_BT_HCIBFUSB=y +# CONFIG_BT_HCIBRF6150 is not set +# CONFIG_BT_HCIH4P is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=y +CONFIG_LIB80211_CRYPT_WEP=y +CONFIG_LIB80211_CRYPT_CCMP=y +CONFIG_LIB80211_CRYPT_TKIP=y +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_WIMAX=m +CONFIG_WIMAX_DEBUG_LEVEL=8 +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_OMAP_STI is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +CONFIG_EEPROM_93CX6=y +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=m + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_MII=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=y +CONFIG_LIBERTAS_USB=y +# CONFIG_LIBERTAS_SDIO is not set +# CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_LIBERTAS_THINFIRM is not set +CONFIG_USB_ZD1201=y +CONFIG_USB_NET_RNDIS_WLAN=y +CONFIG_RTL8187=y +# CONFIG_MAC80211_HWSIM is not set +CONFIG_P54_COMMON=y +CONFIG_P54_USB=y +# CONFIG_IWLWIFI_LEDS is not set +CONFIG_HOSTAP=y +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_B43=y +CONFIG_B43_LEDS=y +# CONFIG_B43_DEBUG is not set +# CONFIG_B43LEGACY is not set +CONFIG_ZD1211RW=y +# CONFIG_ZD1211RW_DEBUG is not set +CONFIG_RT2X00=y +CONFIG_RT2500USB=y +CONFIG_RT73USB=y +CONFIG_RT2X00_LIB_USB=y +CONFIG_RT2X00_LIB=y +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_LEDS=y +# CONFIG_RT2X00_DEBUG is not set + +# +# WiMAX Wireless Broadband devices +# +# CONFIG_WIMAX_I2400M_USB is not set +# CONFIG_WIMAX_I2400M_SDIO is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=y +CONFIG_USB_KAWETH=y +CONFIG_USB_PEGASUS=y +CONFIG_USB_RTL8150=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +CONFIG_USB_NET_DM9601=y +CONFIG_USB_NET_SMSC95XX=y +CONFIG_USB_NET_GL620A=y +CONFIG_USB_NET_NET1080=y +CONFIG_USB_NET_PLUSB=y +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=y +CONFIG_USB_NET_CDC_SUBSET=y +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_TWL4030 is not set +# CONFIG_KEYBOARD_LM8323 is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_TWL4030_PWRBUTTON=y +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +CONFIG_TWL4030_MADC=m +CONFIG_TWL4030_POWEROFF=y +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_OMAP24XX is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=m +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_TWL4030_BCI_BATTERY is not set +# CONFIG_BATTERY_BQ27x00 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_TSC210X is not set +CONFIG_SENSORS_OMAP34XX=y +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=y +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_WM8775=m +CONFIG_VIDEO_SAA711X=m +CONFIG_VIDEO_CX25840=m +CONFIG_VIDEO_CX2341X=m +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_VIDEO_AU0828 is not set +# CONFIG_VIDEO_OMAP3 is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_STK014=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_ZC3XX=m +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +# CONFIG_VIDEO_EM28XX is not set +CONFIG_VIDEO_USBVISION=m +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +CONFIG_USB_QUICKCAM_MESSENGER=m +# CONFIG_USB_ET61X251 is not set +CONFIG_VIDEO_OVCAMCHIP=m +CONFIG_USB_W9968CF=m +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_ZR364XX=m +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_USB_DSBR is not set +# CONFIG_USB_SI470X is not set +# CONFIG_USB_MR800 is not set +# CONFIG_RADIO_TEA5764 is not set +# CONFIG_DVB_DYNAMIC_MINORS is not set +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Supported USB Adapters +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +CONFIG_DVB_USB_DW2102=m +CONFIG_DVB_USB_CINERGY_T2=m +CONFIG_DVB_USB_ANYSEE=m +CONFIG_DVB_USB_DTV5100=m +CONFIG_DVB_USB_AF9015=m +CONFIG_DVB_SIANO_SMS1XXX=m +CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# + +# +# Customise DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set + +# +# Multistandard (satellite) frontends +# +# CONFIG_DVB_STB0899 is not set +# CONFIG_DVB_STB6100 is not set + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_TDA8261=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TUNER_CX24113=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_SI21XX=m + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +# CONFIG_DVB_DRX397XD is not set +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +# CONFIG_DVB_OR51211 is not set +# CONFIG_DVB_OR51132 is not set +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3304=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_S5H1411=m + +# +# ISDB-T (terrestrial) frontends +# +CONFIG_DVB_S921=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_LNBP21=m +# CONFIG_DVB_ISL6405 is not set +CONFIG_DVB_ISL6421=m +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +CONFIG_DVB_AF9013=m +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_DSS_VRAM_SIZE=14 +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y +# CONFIG_OMAP2_DSS_RFBI is not set +CONFIG_OMAP2_DSS_VENC=y +# CONFIG_OMAP2_DSS_SDI is not set +CONFIG_OMAP2_DSS_DSI=y +CONFIG_OMAP2_DSS_USE_DSI_PLL=y +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=1 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_GENERIC=y +CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C=m +# CONFIG_PANEL_SHARP_LS037V7DW01 is not set +# CONFIG_PANEL_N800 is not set +# CONFIG_CTRL_BLIZZARD is not set +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG_SUPPORT=y +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set +CONFIG_FB_OMAP2_NUM_FBS=3 +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=y +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_MCBSP=y +CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_TWL4030=y +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_GREENASIA_FF=y +CONFIG_HID_TOPSEED=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_OMAP_EHCI_PHY_MODE=y +# CONFIG_OMAP_EHCI_TLL_MODE is not set +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_OXU210HP_HCD=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP2101=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_FUNSOFT=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MOTOROLA=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIEMENS_MPI=m +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_USB_CDC_COMPOSITE=y + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +CONFIG_USB_GPIO_VBUS=y +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_OMAP_HS=y +CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_OMAP_DEBUG is not set +CONFIG_LEDS_OMAP=y +# CONFIG_LEDS_OMAP_PWM is not set +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +# CONFIG_JFFS2_CMODE_PRIORITY is not set +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_JFFS2_CMODE_FAVOURLZO=y +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-omap-2.6.29/beagleboard/ehci.patch b/meta/packages/linux/linux-omap-2.6.29/beagleboard/ehci.patch new file mode 100644 index 000000000..5a8c84471 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/beagleboard/ehci.patch @@ -0,0 +1,131 @@ +Index: git/arch/arm/mach-omap2/board-omap3beagle.c +=================================================================== +--- git.orig/arch/arm/mach-omap2/board-omap3beagle.c ++++ git/arch/arm/mach-omap2/board-omap3beagle.c +@@ -154,6 +154,7 @@ static int beagle_twl_gpio_setup(struct + * power switch and overcurrent detect + */ + ++#if 0 /* TODO: This needs to be modified to not rely on u-boot */ + gpio_request(gpio + 1, "EHCI_nOC"); + gpio_direction_input(gpio + 1); + +@@ -163,7 +164,7 @@ static int beagle_twl_gpio_setup(struct + + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; +- ++#endif + return 0; + } + +Index: git/arch/arm/mach-omap2/usb-ehci.c +=================================================================== +--- git.orig/arch/arm/mach-omap2/usb-ehci.c ++++ git/arch/arm/mach-omap2/usb-ehci.c +@@ -147,9 +147,11 @@ static void setup_ehci_io_mux(void) + + void __init usb_ehci_init(void) + { ++#if 0 /* TODO: Setup Pin IO MUX for EHCI - moved this temporarily to U-boot */ + /* Setup Pin IO MUX for EHCI */ + if (cpu_is_omap34xx()) + setup_ehci_io_mux(); ++#endif + + if (platform_device_register(&ehci_device) < 0) { + printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); +Index: git/drivers/usb/host/ehci-omap.c +=================================================================== +--- git.orig/drivers/usb/host/ehci-omap.c ++++ git/drivers/usb/host/ehci-omap.c +@@ -48,16 +48,25 @@ + * to get the PHY state machine in working state + */ + #define EXTERNAL_PHY_RESET ++#ifdef CONFIG_MACH_OMAP3_BEAGLE ++#define EXT_PHY_RESET_GPIO_PORT2 (147) ++#else + #define EXT_PHY_RESET_GPIO_PORT1 (57) + #define EXT_PHY_RESET_GPIO_PORT2 (61) ++#endif + #define EXT_PHY_RESET_DELAY (10) + ++#define PHY_STP_PULLUP_ENABLE (0x10) ++#define PHY_STP_PULLUP_DISABLE (0x90) ++ + /* ISSUE2: + * USBHOST supports External charge pump PHYs only + * Use the VBUS from Port1 to power VBUS of Port2 externally + * So use Port2 as the working ULPI port + */ ++#ifndef CONFIG_MACH_OMAP3_BEAGLE + #define VBUS_INTERNAL_CHARGEPUMP_HACK ++#endif + + #endif /* CONFIG_OMAP_EHCI_PHY_MODE */ + +@@ -225,14 +234,43 @@ static int omap_start_ehc(struct platfor + + #ifdef EXTERNAL_PHY_RESET + /* Refer: ISSUE1 */ ++#ifndef CONFIG_MACH_OMAP3_BEAGLE + gpio_request(EXT_PHY_RESET_GPIO_PORT1, "USB1 PHY reset"); + gpio_direction_output(EXT_PHY_RESET_GPIO_PORT1, 0); ++#endif + gpio_request(EXT_PHY_RESET_GPIO_PORT2, "USB2 PHY reset"); + gpio_direction_output(EXT_PHY_RESET_GPIO_PORT2, 0); ++ gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 0); + /* Hold the PHY in RESET for enough time till DIR is high */ + udelay(EXT_PHY_RESET_DELAY); + #endif + ++ /* ++ * The PHY register 0x7 - Interface Control register is ++ * configured to disable the integrated STP pull-up resistor ++ * used for interface protection. ++ * ++ * May not need to be here. ++ */ ++ omap_writel((0x7 << EHCI_INSNREG05_ULPI_REGADD_SHIFT) |/* interface reg */ ++ (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) |/* Write */ ++ (1 << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) |/* Port1 */ ++ (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT) |/* Start */ ++ (PHY_STP_PULLUP_DISABLE), ++ EHCI_INSNREG05_ULPI); ++ ++ while (!(omap_readl(EHCI_INSNREG05_ULPI) & (1<usbtll_fck_clk = clk_get(&dev->dev, USBHOST_TLL_FCLK); + if (IS_ERR(ehci_clocks->usbtll_fck_clk)) +@@ -307,7 +345,9 @@ static int omap_start_ehc(struct platfor + * Hold the PHY in RESET for enough time till PHY is settled and ready + */ + udelay(EXT_PHY_RESET_DELAY); ++#ifndef CONFIG_MACH_OMAP3_BEAGLE + gpio_set_value(EXT_PHY_RESET_GPIO_PORT1, 1); ++#endif + gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 1); + #endif + +@@ -393,7 +433,9 @@ static void omap_stop_ehc(struct platfor + + + #ifdef EXTERNAL_PHY_RESET ++#ifndef CONFIG_MACH_OMAP3_BEAGLE + gpio_free(EXT_PHY_RESET_GPIO_PORT1); ++#endif + gpio_free(EXT_PHY_RESET_GPIO_PORT2); + #endif + diff --git a/meta/packages/linux/linux-omap-2.6.29/beagleboard/logo_linux_clut224.ppm b/meta/packages/linux/linux-omap-2.6.29/beagleboard/logo_linux_clut224.ppm new file mode 100644 index 000000000..d29fc1c54 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/beagleboard/logo_linux_clut224.ppm @@ -0,0 +1,73147 @@ +P3 +# CREATOR: GIMP PNM Filter Version 1.1 +387 63 +255 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +116 +28 +246 +116 +28 +246 +116 +28 +246 +116 +28 +246 +116 +28 +246 +116 +28 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +111 +26 +246 +116 +28 +246 +116 +28 +247 +118 +39 +247 +118 +39 +247 +118 +39 +246 +116 +28 +247 +111 +26 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +246 +116 +28 +247 +118 +39 +247 +118 +39 +247 +118 +39 +246 +116 +28 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +246 +116 +28 +247 +118 +39 +247 +118 +39 +247 +118 +39 +246 +116 +28 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +246 +116 +28 +247 +118 +39 +247 +118 +39 +247 +118 +39 +246 +116 +28 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +118 +39 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +123 +41 +247 +123 +41 +247 +118 +39 +246 +116 +28 +247 +111 +26 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +246 +116 +28 +247 +118 +39 +247 +123 +41 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +123 +41 +247 +118 +39 +246 +116 +28 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +111 +26 +246 +116 +28 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +123 +41 +247 +118 +39 +247 +111 +26 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +118 +39 +247 +123 +41 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +123 +41 +247 +123 +41 +247 +118 +39 +247 +111 +26 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +111 +26 +246 +116 +28 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +123 +41 +247 +118 +39 +247 +111 +26 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +247 +111 +26 +246 +116 +28 +247 +118 +39 +247 +123 +41 +247 +130 +53 +248 +138 +64 +250 +139 +73 +247 +143 +74 +247 +143 +74 +249 +146 +83 +249 +146 +83 +249 +146 +83 +247 +143 +74 +250 +139 +73 +248 +138 +64 +247 +130 +53 +247 +123 +41 +247 +118 +39 +246 +116 +28 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +246 +116 +28 +247 +123 +41 +247 +130 +53 +248 +138 +64 +250 +139 +73 +247 +143 +74 +247 +143 +74 +250 +139 +73 +248 +138 +64 +247 +130 +53 +247 +123 +41 +246 +116 +28 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +118 +39 +247 +123 +41 +247 +130 +60 +248 +138 +64 +247 +143 +74 +247 +143 +74 +247 +143 +74 +250 +139 +73 +247 +130 +60 +247 +130 +53 +247 +123 +41 +246 +116 +28 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +118 +39 +247 +130 +53 +247 +130 +60 +250 +139 +73 +247 +143 +74 +247 +143 +74 +247 +143 +74 +248 +138 +64 +247 +130 +60 +247 +130 +53 +247 +118 +39 +247 +111 +26 +247 +111 +26 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +118 +39 +247 +123 +41 +247 +130 +60 +248 +138 +64 +247 +143 +74 +247 +143 +74 +247 +143 +74 +250 +139 +73 +247 +130 +60 +247 +130 +53 +247 +123 +41 +246 +116 +28 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +246 +116 +28 +247 +118 +39 +247 +130 +53 +247 +130 +60 +250 +139 +73 +249 +146 +83 +249 +152 +92 +249 +159 +103 +249 +159 +103 +247 +165 +111 +251 +168 +115 +251 +168 +115 +247 +165 +111 +247 +165 +111 +249 +159 +103 +249 +152 +92 +249 +146 +83 +250 +139 +73 +247 +130 +60 +247 +123 +41 +247 +118 +39 +247 +111 +26 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +246 +116 +28 +247 +123 +41 +247 +130 +60 +247 +143 +74 +247 +150 +84 +246 +156 +93 +249 +159 +103 +249 +159 +103 +246 +156 +93 +247 +150 +84 +250 +139 +73 +247 +130 +60 +247 +123 +41 +246 +116 +28 +247 +111 +26 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +118 +39 +247 +123 +41 +248 +138 +64 +247 +143 +74 +249 +152 +92 +249 +159 +103 +249 +159 +103 +249 +159 +103 +246 +156 +93 +247 +150 +84 +250 +139 +73 +247 +130 +53 +247 +123 +41 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +118 +39 +247 +130 +53 +248 +138 +64 +249 +146 +83 +249 +152 +92 +249 +159 +103 +249 +159 +103 +249 +159 +103 +249 +152 +92 +249 +146 +83 +248 +138 +64 +247 +130 +53 +247 +118 +39 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +118 +39 +247 +130 +53 +248 +138 +64 +247 +143 +74 +249 +152 +92 +249 +159 +103 +249 +159 +103 +249 +159 +103 +246 +156 +93 +247 +150 +84 +250 +139 +73 +247 +130 +53 +247 +123 +41 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +118 +39 +247 +123 +41 +247 +130 +60 +250 +139 +73 +247 +150 +84 +249 +159 +103 +247 +165 +111 +249 +174 +124 +248 +180 +134 +252 +185 +144 +240 +181 +138 +219 +170 +138 +219 +170 +138 +230 +173 +136 +240 +181 +138 +248 +180 +134 +249 +174 +124 +247 +165 +111 +249 +159 +103 +249 +146 +83 +248 +138 +64 +247 +130 +53 +247 +123 +41 +247 +111 +26 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +247 +130 +60 +247 +143 +74 +249 +159 +103 +214 +151 +109 +121 +100 +85 +65 +67 +64 +74 +68 +68 +129 +102 +78 +214 +151 +109 +246 +156 +93 +247 +143 +74 +247 +130 +53 +247 +118 +39 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +111 +26 +246 +116 +28 +247 +123 +41 +248 +138 +64 +249 +146 +83 +249 +159 +103 +204 +141 +99 +102 +91 +75 +65 +67 +64 +81 +77 +76 +146 +111 +88 +238 +159 +107 +249 +152 +92 +250 +139 +73 +247 +130 +53 +247 +118 +39 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +118 +39 +247 +130 +53 +248 +138 +64 +247 +150 +84 +245 +162 +103 +162 +125 +96 +81 +77 +76 +55 +66 +67 +99 +90 +79 +187 +140 +108 +249 +159 +103 +247 +150 +84 +248 +138 +64 +247 +123 +41 +246 +116 +28 +247 +111 +26 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +111 +26 +246 +116 +28 +247 +123 +41 +248 +138 +64 +249 +146 +83 +249 +159 +103 +187 +140 +108 +102 +91 +75 +58 +69 +70 +76 +78 +76 +146 +111 +88 +238 +159 +107 +249 +152 +92 +250 +139 +73 +247 +130 +53 +247 +118 +39 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +246 +116 +28 +247 +123 +41 +247 +130 +53 +248 +138 +64 +249 +146 +83 +249 +159 +103 +251 +168 +115 +248 +180 +134 +239 +182 +144 +186 +157 +134 +124 +111 +99 +82 +69 +65 +65 +58 +56 +55 +48 +48 +65 +58 +56 +65 +58 +56 +65 +58 +56 +99 +90 +79 +158 +130 +108 +230 +173 +136 +250 +176 +132 +247 +165 +111 +249 +152 +92 +247 +143 +74 +247 +130 +53 +247 +123 +41 +246 +116 +28 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +111 +26 +247 +118 +39 +247 +130 +53 +250 +139 +73 +246 +156 +93 +214 +151 +109 +74 +68 +68 +56 +64 +60 +95 +87 +59 +88 +82 +59 +56 +64 +60 +81 +77 +76 +238 +159 +107 +249 +152 +92 +248 +138 +64 +247 +130 +53 +246 +116 +28 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +118 +39 +247 +130 +53 +247 +143 +74 +249 +159 +103 +187 +140 +108 +51 +62 +63 +69 +69 +61 +95 +87 +59 +83 +78 +61 +48 +58 +59 +121 +100 +85 +247 +165 +111 +247 +150 +84 +248 +138 +64 +247 +123 +41 +246 +116 +28 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +247 +130 +60 +247 +150 +84 +247 +165 +111 +139 +115 +96 +48 +58 +59 +95 +78 +64 +118 +86 +65 +81 +73 +62 +48 +58 +59 +162 +125 +96 +249 +159 +103 +249 +146 +83 +247 +130 +60 +247 +123 +41 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +118 +39 +247 +130 +53 +247 +143 +74 +249 +159 +103 +187 +140 +108 +48 +58 +59 +76 +70 +64 +118 +86 +65 +95 +78 +64 +51 +62 +63 +121 +100 +85 +247 +165 +111 +247 +150 +84 +248 +138 +64 +247 +123 +41 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +246 +116 +28 +247 +123 +41 +247 +130 +60 +247 +143 +74 +249 +152 +92 +247 +165 +111 +250 +176 +132 +251 +192 +154 +167 +142 +123 +65 +58 +56 +35 +31 +30 +71 +60 +43 +108 +87 +46 +129 +106 +52 +137 +110 +49 +156 +125 +62 +187 +166 +150 +129 +106 +52 +101 +83 +47 +59 +50 +39 +55 +48 +48 +139 +115 +96 +240 +181 +138 +249 +174 +124 +249 +159 +103 +247 +143 +74 +247 +130 +53 +247 +123 +41 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +247 +130 +60 +247 +150 +84 +247 +165 +111 +124 +111 +99 +56 +64 +60 +137 +110 +49 +171 +129 +45 +171 +129 +45 +129 +106 +52 +51 +62 +63 +162 +125 +96 +247 +165 +111 +249 +146 +83 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +248 +138 +64 +249 +152 +92 +245 +169 +119 +81 +77 +76 +69 +69 +61 +152 +119 +47 +171 +129 +45 +171 +129 +45 +105 +93 +60 +48 +58 +59 +187 +140 +108 +249 +159 +103 +247 +143 +74 +247 +130 +53 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +111 +26 +246 +116 +28 +247 +130 +53 +250 +139 +73 +249 +159 +103 +210 +156 +119 +51 +62 +63 +112 +85 +63 +234 +126 +45 +234 +126 +45 +225 +124 +48 +95 +78 +64 +63 +74 +74 +234 +168 +124 +246 +156 +93 +250 +139 +73 +247 +123 +41 +246 +116 +28 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +248 +138 +64 +249 +152 +92 +245 +169 +119 +81 +77 +76 +81 +73 +62 +212 +120 +56 +234 +126 +45 +234 +126 +45 +135 +94 +64 +41 +58 +57 +187 +140 +108 +249 +159 +103 +247 +143 +74 +247 +130 +53 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +246 +116 +28 +247 +123 +41 +247 +130 +60 +249 +146 +83 +249 +159 +103 +249 +174 +124 +249 +189 +146 +236 +186 +153 +99 +90 +79 +47 +40 +38 +85 +71 +43 +145 +114 +49 +171 +129 +45 +171 +129 +45 +171 +129 +45 +168 +127 +42 +160 +120 +43 +195 +167 +113 +216 +194 +154 +168 +127 +42 +168 +127 +42 +123 +102 +54 +59 +50 +39 +82 +69 +65 +230 +173 +136 +249 +174 +124 +249 +159 +103 +247 +143 +74 +247 +130 +53 +247 +118 +39 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +248 +138 +64 +246 +156 +93 +245 +169 +119 +84 +85 +82 +83 +78 +61 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +75 +74 +61 +101 +100 +92 +249 +174 +124 +246 +156 +93 +248 +138 +64 +247 +123 +41 +246 +116 +28 +247 +111 +26 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +111 +26 +247 +118 +39 +247 +130 +53 +247 +143 +74 +249 +159 +103 +210 +156 +119 +48 +58 +59 +105 +93 +60 +171 +129 +45 +158 +125 +46 +161 +127 +40 +152 +119 +47 +62 +63 +61 +139 +115 +96 +251 +168 +115 +247 +150 +84 +247 +130 +60 +247 +123 +41 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +111 +26 +247 +118 +39 +247 +130 +53 +249 +146 +83 +247 +165 +111 +158 +130 +108 +51 +62 +63 +188 +112 +56 +234 +125 +52 +224 +123 +55 +234 +126 +45 +163 +104 +61 +48 +58 +59 +210 +156 +119 +247 +165 +111 +249 +146 +83 +247 +130 +60 +247 +118 +39 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +118 +39 +247 +130 +53 +247 +143 +74 +247 +165 +111 +210 +156 +119 +55 +66 +67 +146 +97 +64 +234 +126 +45 +224 +123 +55 +234 +125 +52 +199 +115 +54 +62 +63 +61 +139 +115 +96 +251 +168 +115 +247 +150 +84 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +111 +26 +246 +116 +28 +247 +123 +41 +247 +130 +60 +249 +146 +83 +249 +159 +103 +250 +176 +132 +219 +170 +138 +150 +125 +114 +65 +58 +56 +24 +22 +23 +59 +50 +39 +152 +119 +47 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +160 +120 +43 +158 +125 +46 +227 +196 +175 +192 +155 +91 +160 +120 +43 +171 +129 +45 +158 +125 +46 +85 +71 +43 +65 +58 +56 +219 +170 +138 +249 +174 +124 +246 +156 +93 +250 +139 +73 +247 +130 +53 +247 +118 +39 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +97 +3 +247 +103 +7 +246 +109 +10 +246 +116 +28 +247 +130 +53 +247 +143 +74 +249 +159 +103 +230 +173 +136 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +91 +92 +89 +252 +185 +144 +247 +165 +111 +249 +146 +83 +247 +130 +60 +247 +123 +41 +246 +116 +28 +247 +111 +26 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +111 +26 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +111 +26 +246 +116 +28 +247 +123 +41 +248 +138 +64 +249 +152 +92 +249 +174 +124 +203 +161 +131 +43 +57 +62 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +133 +120 +107 +250 +176 +132 +246 +156 +93 +248 +138 +64 +247 +123 +41 +246 +116 +28 +247 +111 +26 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +111 +26 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +248 +138 +64 +249 +152 +92 +249 +174 +124 +154 +133 +118 +56 +64 +60 +199 +115 +54 +227 +126 +50 +224 +123 +55 +234 +125 +52 +183 +110 +59 +51 +62 +63 +186 +157 +134 +250 +176 +132 +246 +156 +93 +250 +139 +73 +247 +130 +53 +247 +118 +39 +247 +111 +26 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +118 +39 +247 +130 +53 +250 +139 +73 +246 +156 +93 +249 +174 +124 +209 +171 +139 +51 +62 +63 +155 +100 +63 +234 +125 +52 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +133 +120 +107 +249 +174 +124 +246 +156 +93 +248 +138 +64 +247 +123 +41 +247 +111 +26 +246 +109 +10 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +118 +39 +247 +130 +53 +247 +143 +74 +249 +159 +103 +250 +176 +132 +158 +130 +108 +47 +40 +38 +59 +50 +39 +85 +71 +43 +85 +71 +43 +59 +50 +39 +35 +31 +30 +123 +102 +54 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +152 +119 +47 +192 +155 +91 +224 +207 +180 +158 +125 +46 +160 +120 +43 +168 +127 +42 +171 +129 +45 +71 +60 +43 +82 +69 +65 +239 +182 +144 +249 +174 +124 +249 +152 +92 +248 +138 +64 +247 +123 +41 +246 +116 +28 +247 +111 +26 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +111 +26 +247 +118 +39 +247 +130 +53 +249 +146 +83 +247 +165 +111 +239 +182 +144 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +91 +92 +89 +250 +197 +158 +250 +176 +132 +249 +159 +103 +247 +143 +74 +247 +130 +60 +247 +123 +41 +247 +118 +39 +246 +116 +28 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +116 +28 +247 +118 +39 +247 +118 +39 +247 +118 +39 +246 +116 +28 +246 +116 +28 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +246 +116 +28 +246 +116 +28 +246 +116 +28 +247 +118 +39 +247 +118 +39 +246 +116 +28 +246 +116 +28 +246 +116 +28 +246 +116 +28 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +116 +28 +246 +116 +28 +247 +118 +39 +247 +118 +39 +246 +116 +28 +246 +116 +28 +246 +116 +28 +246 +116 +28 +246 +116 +28 +247 +118 +39 +247 +123 +41 +247 +130 +60 +249 +146 +83 +249 +159 +103 +248 +180 +134 +212 +173 +150 +48 +58 +59 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +65 +67 +64 +137 +127 +115 +248 +180 +134 +249 +159 +103 +247 +143 +74 +247 +130 +53 +247 +118 +39 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +116 +28 +247 +118 +39 +247 +118 +39 +247 +118 +39 +246 +116 +28 +246 +116 +28 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +118 +39 +247 +130 +53 +250 +139 +73 +249 +159 +103 +250 +176 +132 +167 +142 +123 +56 +64 +60 +199 +115 +54 +227 +126 +50 +224 +123 +55 +234 +125 +52 +173 +106 +60 +48 +58 +59 +187 +166 +150 +249 +189 +146 +251 +168 +115 +249 +152 +92 +250 +139 +73 +247 +130 +53 +247 +123 +41 +246 +116 +28 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +116 +28 +246 +116 +28 +247 +118 +39 +247 +118 +39 +246 +116 +28 +246 +116 +28 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +116 +28 +246 +116 +28 +247 +118 +39 +247 +118 +39 +246 +116 +28 +246 +116 +28 +246 +116 +28 +246 +116 +28 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +116 +28 +247 +123 +41 +247 +130 +53 +248 +138 +64 +247 +150 +84 +247 +165 +111 +252 +185 +144 +212 +173 +150 +51 +62 +63 +155 +100 +63 +234 +125 +52 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +133 +120 +107 +248 +180 +134 +249 +159 +103 +250 +139 +73 +247 +123 +41 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +116 +28 +246 +116 +28 +247 +118 +39 +247 +118 +39 +247 +118 +39 +246 +116 +28 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +103 +7 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +116 +28 +246 +116 +28 +247 +118 +39 +247 +118 +39 +246 +116 +28 +246 +116 +28 +246 +116 +28 +246 +116 +28 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +111 +26 +247 +118 +39 +247 +130 +53 +250 +139 +73 +249 +159 +103 +250 +176 +132 +167 +142 +123 +24 +22 +23 +85 +71 +43 +158 +125 +46 +171 +129 +45 +171 +129 +45 +171 +129 +45 +85 +71 +43 +35 +31 +30 +145 +114 +49 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +152 +119 +47 +216 +194 +154 +195 +167 +113 +152 +119 +47 +158 +125 +46 +168 +127 +42 +158 +125 +46 +59 +50 +39 +139 +115 +96 +252 +185 +144 +247 +165 +111 +247 +150 +84 +247 +130 +60 +247 +123 +41 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +118 +39 +247 +130 +60 +247 +150 +84 +251 +168 +115 +236 +186 +153 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +91 +92 +89 +251 +209 +178 +249 +189 +146 +249 +174 +124 +249 +159 +103 +249 +146 +83 +248 +138 +64 +247 +130 +53 +247 +130 +53 +247 +123 +41 +247 +118 +39 +246 +116 +28 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +247 +111 +26 +246 +116 +28 +247 +118 +39 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +123 +41 +247 +123 +41 +246 +116 +28 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +111 +26 +246 +116 +28 +247 +118 +39 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +118 +39 +246 +116 +28 +246 +116 +28 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +116 +28 +247 +118 +39 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +248 +138 +64 +247 +143 +74 +246 +156 +93 +249 +174 +124 +251 +192 +154 +207 +178 +158 +48 +58 +59 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +137 +127 +115 +249 +189 +146 +247 +165 +111 +247 +150 +84 +248 +138 +64 +247 +130 +53 +247 +123 +41 +247 +118 +39 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +123 +41 +247 +118 +39 +247 +118 +39 +247 +118 +39 +247 +123 +41 +247 +130 +60 +247 +143 +74 +249 +159 +103 +252 +185 +144 +167 +142 +123 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +234 +125 +52 +173 +106 +60 +51 +62 +63 +187 +166 +150 +250 +200 +166 +248 +180 +134 +247 +165 +111 +249 +152 +92 +247 +143 +74 +247 +130 +60 +247 +130 +53 +247 +123 +41 +247 +123 +41 +247 +118 +39 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +118 +39 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +123 +41 +247 +123 +41 +247 +118 +39 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +118 +39 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +118 +39 +247 +118 +39 +247 +118 +39 +247 +118 +39 +247 +118 +39 +247 +118 +39 +247 +118 +39 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +130 +60 +250 +139 +73 +249 +152 +92 +247 +165 +111 +248 +180 +134 +250 +197 +158 +207 +178 +158 +51 +62 +63 +155 +100 +63 +234 +125 +52 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +252 +185 +144 +249 +159 +103 +247 +143 +74 +247 +130 +53 +246 +116 +28 +246 +109 +10 +247 +103 +7 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +118 +39 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +123 +41 +247 +123 +41 +247 +118 +39 +246 +116 +28 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +116 +28 +247 +118 +39 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +118 +39 +247 +118 +39 +246 +116 +28 +246 +116 +28 +246 +116 +28 +247 +118 +39 +247 +118 +39 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +118 +39 +246 +116 +28 +247 +111 +26 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +248 +138 +64 +247 +150 +84 +251 +168 +115 +230 +173 +136 +47 +40 +38 +59 +50 +39 +168 +127 +42 +168 +127 +42 +158 +125 +46 +158 +125 +46 +161 +127 +40 +171 +129 +45 +59 +50 +39 +71 +60 +43 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +152 +119 +47 +170 +137 +67 +239 +227 +208 +170 +137 +67 +160 +120 +43 +158 +125 +46 +171 +129 +45 +123 +102 +54 +47 +40 +38 +209 +171 +139 +248 +180 +134 +247 +165 +111 +249 +146 +83 +247 +130 +60 +247 +123 +41 +247 +111 +26 +247 +111 +26 +246 +109 +10 +247 +111 +26 +247 +123 +41 +247 +130 +60 +247 +150 +84 +249 +174 +124 +236 +186 +153 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +91 +92 +89 +255 +215 +190 +253 +204 +176 +249 +189 +146 +249 +174 +124 +247 +165 +111 +246 +156 +93 +249 +146 +83 +247 +143 +74 +248 +138 +64 +247 +130 +60 +247 +130 +53 +247 +123 +41 +246 +116 +28 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +116 +28 +247 +118 +39 +247 +123 +41 +247 +130 +53 +248 +138 +64 +250 +139 +73 +247 +143 +74 +249 +146 +83 +247 +150 +84 +249 +146 +83 +249 +146 +83 +247 +143 +74 +248 +138 +64 +247 +130 +60 +247 +130 +53 +247 +123 +41 +247 +118 +39 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +247 +111 +26 +247 +111 +26 +246 +116 +28 +247 +118 +39 +247 +123 +41 +247 +130 +53 +248 +138 +64 +250 +139 +73 +247 +143 +74 +249 +146 +83 +249 +146 +83 +249 +146 +83 +249 +146 +83 +249 +146 +83 +247 +143 +74 +247 +143 +74 +250 +139 +73 +250 +139 +73 +248 +138 +64 +247 +130 +60 +247 +130 +53 +247 +130 +53 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +130 +60 +250 +139 +73 +247 +143 +74 +249 +146 +83 +249 +146 +83 +249 +146 +83 +249 +146 +83 +249 +146 +83 +247 +143 +74 +247 +143 +74 +247 +143 +74 +247 +143 +74 +247 +150 +84 +249 +159 +103 +249 +174 +124 +252 +185 +144 +250 +200 +166 +217 +187 +166 +48 +58 +59 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +137 +127 +115 +251 +192 +154 +249 +174 +124 +246 +156 +93 +247 +143 +74 +248 +138 +64 +247 +130 +60 +247 +130 +60 +248 +138 +64 +250 +139 +73 +247 +143 +74 +249 +146 +83 +247 +150 +84 +249 +146 +83 +249 +146 +83 +247 +143 +74 +248 +138 +64 +247 +130 +60 +247 +130 +53 +247 +130 +53 +247 +130 +60 +250 +139 +73 +247 +150 +84 +251 +168 +115 +249 +189 +146 +161 +144 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +234 +125 +52 +173 +106 +60 +48 +58 +59 +187 +166 +150 +253 +212 +188 +250 +197 +158 +248 +180 +134 +251 +168 +115 +249 +159 +103 +247 +150 +84 +247 +143 +74 +250 +139 +73 +248 +138 +64 +247 +130 +53 +247 +123 +41 +247 +118 +39 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +111 +26 +247 +118 +39 +247 +123 +41 +247 +130 +53 +248 +138 +64 +250 +139 +73 +247 +143 +74 +249 +146 +83 +247 +150 +84 +247 +150 +84 +249 +146 +83 +247 +143 +74 +250 +139 +73 +247 +130 +60 +247 +130 +53 +247 +123 +41 +247 +118 +39 +247 +111 +26 +247 +111 +26 +246 +109 +10 +246 +109 +10 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +118 +39 +247 +123 +41 +247 +130 +53 +247 +130 +60 +248 +138 +64 +247 +143 +74 +249 +146 +83 +249 +146 +83 +249 +146 +83 +249 +146 +83 +249 +146 +83 +247 +143 +74 +247 +143 +74 +247 +143 +74 +250 +139 +73 +250 +139 +73 +250 +139 +73 +248 +138 +64 +248 +138 +64 +248 +138 +64 +248 +138 +64 +248 +138 +64 +248 +138 +64 +250 +139 +73 +250 +139 +73 +250 +139 +73 +250 +139 +73 +247 +143 +74 +247 +143 +74 +250 +139 +73 +250 +139 +73 +248 +138 +64 +248 +138 +64 +247 +130 +60 +247 +130 +60 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +60 +247 +130 +60 +248 +138 +64 +250 +139 +73 +247 +143 +74 +247 +150 +84 +249 +159 +103 +251 +168 +115 +248 +180 +134 +250 +197 +158 +253 +212 +188 +207 +178 +158 +51 +62 +63 +155 +100 +63 +234 +125 +52 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +249 +189 +146 +247 +165 +111 +247 +143 +74 +247 +130 +53 +246 +116 +28 +246 +109 +10 +247 +103 +7 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +111 +26 +247 +118 +39 +247 +123 +41 +247 +130 +53 +247 +130 +60 +250 +139 +73 +247 +143 +74 +249 +146 +83 +247 +150 +84 +247 +150 +84 +249 +146 +83 +247 +143 +74 +250 +139 +73 +248 +138 +64 +247 +130 +53 +247 +123 +41 +247 +123 +41 +247 +118 +39 +247 +118 +39 +247 +118 +39 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +130 +53 +248 +138 +64 +248 +138 +64 +250 +139 +73 +250 +139 +73 +247 +143 +74 +247 +143 +74 +250 +139 +73 +250 +139 +73 +248 +138 +64 +247 +130 +60 +247 +130 +60 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +60 +248 +138 +64 +250 +139 +73 +247 +143 +74 +249 +146 +83 +249 +146 +83 +249 +146 +83 +249 +146 +83 +249 +146 +83 +247 +143 +74 +247 +143 +74 +250 +139 +73 +250 +139 +73 +248 +138 +64 +247 +130 +60 +247 +130 +53 +247 +123 +41 +247 +123 +41 +246 +116 +28 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +111 +26 +247 +118 +39 +247 +130 +53 +247 +143 +74 +249 +159 +103 +252 +185 +144 +139 +115 +96 +35 +31 +30 +129 +106 +52 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +117 +98 +55 +35 +31 +30 +152 +119 +47 +168 +127 +42 +168 +127 +42 +160 +120 +43 +168 +127 +42 +171 +129 +45 +152 +119 +47 +216 +194 +154 +224 +207 +180 +160 +120 +43 +160 +120 +43 +137 +110 +49 +102 +91 +75 +35 +31 +30 +115 +102 +92 +250 +200 +166 +250 +176 +132 +249 +159 +103 +249 +146 +83 +247 +130 +60 +247 +123 +41 +246 +116 +28 +247 +111 +26 +246 +116 +28 +247 +123 +41 +248 +138 +64 +249 +152 +92 +249 +174 +124 +236 +186 +153 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +91 +92 +89 +255 +215 +190 +255 +215 +190 +253 +204 +176 +250 +197 +158 +252 +185 +144 +249 +174 +124 +251 +168 +115 +249 +159 +103 +246 +156 +93 +247 +150 +84 +250 +139 +73 +247 +130 +60 +247 +130 +53 +247 +123 +41 +247 +118 +39 +246 +116 +28 +246 +116 +28 +247 +118 +39 +247 +123 +41 +247 +130 +53 +248 +138 +64 +249 +146 +83 +249 +152 +92 +249 +159 +103 +247 +165 +111 +251 +168 +115 +251 +168 +115 +251 +168 +115 +251 +168 +115 +247 +165 +111 +249 +159 +103 +247 +150 +84 +247 +143 +74 +248 +138 +64 +247 +130 +53 +247 +123 +41 +247 +118 +39 +246 +116 +28 +246 +116 +28 +246 +116 +28 +247 +118 +39 +247 +123 +41 +247 +130 +60 +250 +139 +73 +249 +146 +83 +249 +152 +92 +249 +159 +103 +247 +165 +111 +251 +168 +115 +251 +168 +115 +251 +168 +115 +251 +168 +115 +247 +165 +111 +247 +165 +111 +247 +165 +111 +249 +159 +103 +249 +159 +103 +246 +156 +93 +247 +150 +84 +249 +146 +83 +247 +143 +74 +248 +138 +64 +247 +130 +60 +247 +130 +60 +247 +130 +60 +248 +138 +64 +250 +139 +73 +249 +146 +83 +249 +152 +92 +249 +159 +103 +249 +159 +103 +247 +165 +111 +251 +168 +115 +251 +168 +115 +251 +168 +115 +251 +168 +115 +247 +165 +111 +247 +165 +111 +249 +159 +103 +247 +165 +111 +251 +168 +115 +250 +176 +132 +252 +185 +144 +250 +200 +166 +255 +215 +190 +217 +187 +166 +48 +58 +59 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +65 +67 +64 +137 +127 +115 +250 +200 +166 +250 +176 +132 +247 +165 +111 +249 +152 +92 +247 +150 +84 +249 +146 +83 +247 +150 +84 +249 +152 +92 +249 +159 +103 +247 +165 +111 +251 +168 +115 +251 +168 +115 +251 +168 +115 +247 +165 +111 +249 +159 +103 +246 +156 +93 +247 +150 +84 +247 +143 +74 +250 +139 +73 +247 +143 +74 +249 +146 +83 +249 +159 +103 +249 +174 +124 +251 +192 +154 +161 +144 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +227 +126 +50 +173 +106 +60 +51 +62 +63 +187 +166 +150 +255 +215 +190 +253 +212 +188 +250 +200 +166 +249 +189 +146 +248 +180 +134 +249 +174 +124 +247 +165 +111 +249 +159 +103 +249 +152 +92 +247 +143 +74 +248 +138 +64 +247 +130 +53 +247 +123 +41 +247 +118 +39 +246 +116 +28 +247 +111 +26 +246 +116 +28 +247 +118 +39 +247 +123 +41 +247 +130 +53 +248 +138 +64 +247 +143 +74 +249 +152 +92 +249 +159 +103 +247 +165 +111 +251 +168 +115 +251 +168 +115 +251 +168 +115 +251 +168 +115 +247 +165 +111 +249 +159 +103 +249 +152 +92 +247 +143 +74 +248 +138 +64 +247 +130 +53 +247 +123 +41 +247 +118 +39 +247 +111 +26 +247 +111 +26 +247 +111 +26 +246 +116 +28 +247 +123 +41 +247 +130 +53 +248 +138 +64 +247 +143 +74 +247 +150 +84 +249 +159 +103 +249 +159 +103 +247 +165 +111 +251 +168 +115 +251 +168 +115 +251 +168 +115 +251 +168 +115 +247 +165 +111 +247 +165 +111 +249 +159 +103 +249 +159 +103 +249 +159 +103 +249 +159 +103 +249 +159 +103 +249 +159 +103 +246 +156 +93 +246 +156 +93 +246 +156 +93 +249 +159 +103 +249 +159 +103 +249 +159 +103 +249 +159 +103 +249 +159 +103 +249 +159 +103 +249 +159 +103 +249 +159 +103 +249 +159 +103 +249 +159 +103 +249 +152 +92 +249 +152 +92 +247 +150 +84 +249 +146 +83 +249 +146 +83 +249 +146 +83 +247 +150 +84 +249 +152 +92 +246 +156 +93 +249 +159 +103 +247 +165 +111 +249 +174 +124 +250 +176 +132 +249 +189 +146 +250 +200 +166 +253 +212 +188 +255 +215 +190 +207 +178 +158 +51 +62 +63 +155 +100 +63 +234 +125 +52 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +249 +189 +146 +247 +165 +111 +247 +143 +74 +247 +130 +53 +246 +116 +28 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +109 +10 +247 +111 +26 +246 +116 +28 +247 +123 +41 +247 +130 +53 +248 +138 +64 +247 +143 +74 +247 +150 +84 +249 +159 +103 +247 +165 +111 +251 +168 +115 +251 +168 +115 +251 +168 +115 +251 +168 +115 +247 +165 +111 +249 +159 +103 +249 +152 +92 +249 +146 +83 +250 +139 +73 +247 +130 +60 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +60 +248 +138 +64 +247 +143 +74 +249 +146 +83 +249 +152 +92 +246 +156 +93 +249 +159 +103 +249 +159 +103 +249 +159 +103 +249 +159 +103 +249 +159 +103 +249 +159 +103 +246 +156 +93 +249 +152 +92 +247 +150 +84 +249 +146 +83 +247 +143 +74 +247 +143 +74 +247 +143 +74 +249 +146 +83 +247 +150 +84 +246 +156 +93 +249 +159 +103 +247 +165 +111 +247 +165 +111 +251 +168 +115 +251 +168 +115 +251 +168 +115 +247 +165 +111 +247 +165 +111 +247 +165 +111 +249 +159 +103 +249 +159 +103 +246 +156 +93 +247 +150 +84 +247 +143 +74 +248 +138 +64 +247 +130 +53 +247 +123 +41 +247 +118 +39 +247 +111 +26 +246 +109 +10 +247 +103 +7 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +248 +138 +64 +249 +152 +92 +249 +174 +124 +236 +186 +153 +47 +40 +38 +59 +50 +39 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +47 +40 +38 +108 +87 +46 +168 +127 +42 +111 +94 +57 +76 +70 +64 +59 +50 +39 +101 +83 +47 +160 +120 +43 +170 +137 +67 +253 +255 +252 +195 +167 +113 +145 +114 +49 +69 +69 +61 +120 +114 +108 +35 +31 +30 +47 +40 +38 +217 +187 +166 +250 +197 +158 +250 +176 +132 +249 +159 +103 +249 +146 +83 +248 +138 +64 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +130 +53 +250 +139 +73 +246 +156 +93 +250 +176 +132 +232 +190 +161 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +91 +92 +89 +255 +215 +190 +255 +215 +190 +245 +212 +186 +227 +196 +175 +212 +173 +150 +209 +171 +139 +219 +170 +138 +240 +181 +138 +250 +176 +132 +251 +168 +115 +249 +159 +103 +247 +150 +84 +250 +139 +73 +247 +130 +60 +247 +130 +53 +247 +130 +53 +247 +130 +53 +247 +130 +53 +248 +138 +64 +249 +146 +83 +246 +156 +93 +247 +165 +111 +249 +174 +124 +248 +180 +134 +240 +181 +138 +219 +170 +138 +203 +161 +131 +203 +161 +131 +219 +170 +138 +240 +181 +138 +250 +176 +132 +249 +174 +124 +249 +159 +103 +249 +152 +92 +247 +143 +74 +247 +130 +60 +247 +130 +53 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +130 +53 +248 +138 +64 +249 +146 +83 +246 +156 +93 +247 +165 +111 +249 +174 +124 +245 +179 +138 +230 +173 +136 +203 +161 +131 +203 +161 +131 +219 +170 +138 +239 +182 +144 +251 +192 +154 +249 +189 +146 +252 +185 +144 +252 +185 +144 +248 +180 +134 +245 +169 +119 +234 +168 +124 +247 +165 +111 +249 +159 +103 +249 +152 +92 +247 +150 +84 +247 +150 +84 +247 +150 +84 +249 +152 +92 +249 +159 +103 +247 +165 +111 +249 +174 +124 +248 +180 +134 +230 +173 +136 +219 +170 +138 +203 +161 +131 +209 +171 +139 +239 +182 +144 +251 +192 +154 +249 +189 +146 +249 +189 +146 +252 +185 +144 +252 +185 +144 +249 +189 +146 +236 +186 +153 +250 +200 +166 +255 +215 +190 +255 +215 +190 +217 +187 +166 +48 +58 +59 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +65 +67 +64 +137 +127 +115 +253 +204 +176 +252 +185 +144 +249 +174 +124 +247 +165 +111 +247 +165 +111 +247 +165 +111 +251 +168 +115 +249 +174 +124 +248 +180 +134 +230 +173 +136 +219 +170 +138 +203 +161 +131 +209 +171 +139 +230 +173 +136 +245 +179 +138 +250 +176 +132 +251 +168 +115 +249 +159 +103 +249 +159 +103 +246 +156 +93 +249 +159 +103 +251 +168 +115 +248 +180 +134 +250 +197 +158 +161 +144 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +227 +126 +50 +173 +106 +60 +51 +62 +63 +187 +166 +150 +255 +215 +190 +255 +215 +190 +234 +204 +183 +207 +178 +158 +209 +171 +139 +209 +171 +139 +230 +173 +136 +248 +180 +134 +249 +174 +124 +247 +165 +111 +249 +152 +92 +247 +143 +74 +248 +138 +64 +247 +130 +53 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +130 +53 +248 +138 +64 +247 +143 +74 +249 +152 +92 +247 +165 +111 +249 +174 +124 +248 +180 +134 +240 +181 +138 +219 +170 +138 +203 +161 +131 +203 +161 +131 +219 +170 +138 +240 +181 +138 +248 +180 +134 +249 +174 +124 +247 +165 +111 +249 +152 +92 +247 +143 +74 +248 +138 +64 +247 +130 +53 +247 +123 +41 +247 +123 +41 +247 +123 +41 +247 +130 +53 +247 +130 +60 +247 +143 +74 +249 +152 +92 +249 +159 +103 +249 +174 +124 +250 +176 +132 +240 +181 +138 +219 +170 +138 +203 +161 +131 +203 +161 +131 +230 +173 +136 +251 +192 +154 +249 +189 +146 +249 +189 +146 +252 +185 +144 +252 +185 +144 +248 +180 +134 +234 +168 +124 +250 +176 +132 +248 +180 +134 +250 +176 +132 +250 +176 +132 +250 +176 +132 +248 +180 +134 +248 +180 +134 +230 +173 +136 +240 +181 +138 +252 +185 +144 +252 +185 +144 +252 +185 +144 +252 +185 +144 +248 +180 +134 +234 +168 +124 +234 +168 +124 +249 +174 +124 +251 +168 +115 +247 +165 +111 +247 +165 +111 +247 +165 +111 +251 +168 +115 +249 +174 +124 +250 +176 +132 +248 +180 +134 +230 +173 +136 +219 +170 +138 +209 +171 +139 +207 +178 +158 +227 +196 +175 +253 +212 +188 +255 +215 +190 +217 +187 +166 +51 +62 +63 +155 +100 +63 +234 +125 +52 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +249 +189 +146 +247 +165 +111 +247 +143 +74 +247 +130 +53 +246 +116 +28 +247 +111 +26 +246 +109 +10 +246 +109 +10 +247 +111 +26 +246 +116 +28 +247 +123 +41 +247 +130 +60 +247 +143 +74 +249 +152 +92 +249 +159 +103 +249 +174 +124 +248 +180 +134 +240 +181 +138 +219 +170 +138 +203 +161 +131 +203 +161 +131 +219 +170 +138 +240 +181 +138 +248 +180 +134 +249 +174 +124 +247 +165 +111 +249 +159 +103 +247 +150 +84 +249 +146 +83 +247 +143 +74 +247 +143 +74 +249 +146 +83 +249 +152 +92 +249 +159 +103 +247 +165 +111 +234 +168 +124 +234 +168 +124 +248 +180 +134 +252 +185 +144 +252 +185 +144 +252 +185 +144 +248 +180 +134 +250 +176 +132 +234 +168 +124 +249 +174 +124 +251 +168 +115 +247 +165 +111 +247 +165 +111 +249 +159 +103 +247 +165 +111 +251 +168 +115 +249 +174 +124 +250 +176 +132 +248 +180 +134 +230 +173 +136 +203 +161 +131 +203 +161 +131 +219 +170 +138 +239 +182 +144 +251 +192 +154 +249 +189 +146 +252 +185 +144 +252 +185 +144 +248 +180 +134 +234 +168 +124 +238 +159 +107 +247 +165 +111 +249 +152 +92 +247 +143 +74 +247 +130 +60 +247 +123 +41 +246 +116 +28 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +111 +26 +246 +116 +28 +247 +130 +53 +247 +143 +74 +247 +165 +111 +252 +185 +144 +154 +133 +118 +24 +22 +23 +108 +87 +46 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +71 +60 +43 +85 +71 +43 +101 +83 +47 +89 +84 +82 +152 +147 +147 +24 +22 +23 +24 +22 +23 +108 +87 +46 +168 +127 +42 +224 +207 +180 +253 +255 +252 +209 +171 +139 +101 +83 +47 +24 +22 +23 +35 +31 +30 +35 +31 +30 +167 +142 +123 +253 +212 +188 +250 +197 +158 +248 +180 +134 +247 +165 +111 +247 +150 +84 +250 +139 +73 +247 +130 +60 +247 +130 +60 +248 +138 +64 +249 +146 +83 +249 +159 +103 +250 +176 +132 +232 +190 +161 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +97 +98 +96 +217 +187 +166 +137 +127 +115 +91 +92 +89 +55 +66 +67 +48 +58 +59 +48 +58 +59 +55 +66 +67 +84 +85 +82 +133 +120 +107 +209 +171 +139 +248 +180 +134 +251 +168 +115 +249 +159 +103 +247 +150 +84 +247 +143 +74 +250 +139 +73 +250 +139 +73 +249 +146 +83 +249 +152 +92 +247 +165 +111 +249 +174 +124 +245 +179 +138 +178 +146 +122 +124 +111 +99 +76 +78 +76 +51 +62 +63 +48 +58 +59 +48 +58 +59 +58 +69 +70 +91 +92 +89 +144 +125 +110 +203 +161 +131 +248 +180 +134 +249 +174 +124 +249 +159 +103 +247 +150 +84 +247 +143 +74 +248 +138 +64 +248 +138 +64 +250 +139 +73 +249 +146 +83 +246 +156 +93 +247 +165 +111 +250 +176 +132 +230 +173 +136 +154 +133 +118 +101 +100 +92 +58 +69 +70 +48 +58 +59 +48 +58 +59 +51 +62 +63 +84 +85 +82 +137 +127 +115 +217 +187 +166 +253 +212 +188 +227 +196 +175 +144 +125 +110 +89 +84 +82 +81 +77 +76 +115 +102 +92 +210 +156 +119 +249 +174 +124 +251 +168 +115 +251 +168 +115 +251 +168 +115 +249 +174 +124 +250 +176 +132 +252 +185 +144 +195 +157 +134 +124 +111 +99 +76 +78 +76 +51 +62 +63 +48 +58 +59 +48 +58 +59 +70 +79 +77 +120 +114 +108 +187 +166 +150 +253 +212 +188 +253 +212 +188 +172 +150 +134 +101 +100 +92 +77 +85 +81 +101 +100 +92 +176 +156 +141 +255 +215 +190 +217 +187 +166 +48 +58 +59 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +137 +127 +115 +253 +212 +188 +250 +197 +158 +252 +185 +144 +248 +180 +134 +248 +180 +134 +252 +185 +144 +239 +182 +144 +167 +142 +123 +109 +106 +99 +70 +79 +77 +48 +58 +59 +48 +58 +59 +48 +58 +59 +58 +69 +70 +91 +92 +89 +150 +125 +114 +219 +170 +138 +248 +180 +134 +249 +174 +124 +249 +174 +124 +249 +174 +124 +250 +176 +132 +249 +189 +146 +253 +204 +176 +161 +144 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +234 +125 +52 +183 +110 +59 +51 +62 +63 +176 +156 +141 +187 +166 +150 +109 +106 +99 +63 +74 +74 +43 +57 +62 +43 +57 +62 +43 +57 +62 +63 +74 +74 +109 +106 +99 +178 +146 +122 +245 +179 +138 +249 +174 +124 +249 +159 +103 +247 +150 +84 +247 +143 +74 +248 +138 +64 +248 +138 +64 +248 +138 +64 +247 +143 +74 +247 +150 +84 +249 +159 +103 +249 +174 +124 +252 +185 +144 +195 +157 +134 +124 +111 +99 +77 +85 +81 +51 +62 +63 +41 +58 +57 +43 +57 +62 +51 +62 +63 +77 +85 +81 +124 +111 +99 +195 +157 +134 +252 +185 +144 +249 +174 +124 +249 +159 +103 +247 +150 +84 +247 +143 +74 +248 +138 +64 +247 +130 +60 +248 +138 +64 +250 +139 +73 +247 +150 +84 +249 +159 +103 +251 +168 +115 +248 +180 +134 +203 +161 +131 +124 +111 +99 +77 +85 +81 +48 +58 +59 +43 +57 +62 +43 +57 +62 +63 +74 +74 +109 +106 +99 +187 +166 +150 +253 +212 +188 +253 +212 +188 +187 +166 +150 +109 +106 +99 +77 +85 +81 +84 +85 +82 +150 +125 +114 +232 +190 +161 +253 +204 +176 +253 +204 +176 +172 +150 +134 +101 +100 +92 +77 +85 +81 +91 +92 +89 +137 +127 +115 +227 +196 +175 +253 +212 +188 +186 +157 +134 +109 +106 +99 +77 +85 +81 +84 +85 +82 +124 +111 +99 +219 +170 +138 +249 +189 +146 +249 +189 +146 +249 +189 +146 +251 +192 +154 +250 +197 +158 +186 +157 +134 +109 +106 +99 +70 +79 +77 +43 +57 +62 +43 +57 +62 +41 +58 +57 +63 +74 +74 +101 +100 +92 +176 +156 +141 +194 +173 +157 +55 +66 +67 +155 +100 +63 +234 +125 +52 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +249 +189 +146 +247 +165 +111 +247 +143 +74 +247 +130 +53 +247 +118 +39 +247 +111 +26 +246 +109 +10 +247 +111 +26 +246 +116 +28 +247 +123 +41 +247 +130 +60 +249 +146 +83 +249 +159 +103 +249 +174 +124 +252 +185 +144 +203 +161 +131 +133 +120 +107 +84 +85 +82 +55 +66 +67 +43 +57 +62 +41 +58 +57 +51 +62 +63 +77 +85 +81 +124 +111 +99 +178 +146 +122 +239 +182 +144 +250 +176 +132 +249 +174 +124 +247 +165 +111 +249 +159 +103 +249 +159 +103 +247 +165 +111 +249 +174 +124 +210 +156 +119 +124 +111 +99 +77 +85 +81 +77 +85 +81 +109 +106 +99 +194 +173 +157 +253 +212 +188 +217 +187 +166 +133 +120 +107 +89 +84 +82 +76 +78 +76 +101 +100 +92 +178 +146 +122 +249 +189 +146 +252 +185 +144 +252 +185 +144 +252 +185 +144 +251 +192 +154 +236 +186 +153 +167 +142 +123 +101 +100 +92 +63 +74 +74 +41 +58 +57 +43 +57 +62 +51 +62 +63 +77 +85 +81 +137 +127 +115 +217 +187 +166 +253 +212 +188 +227 +196 +175 +144 +125 +110 +84 +85 +82 +76 +78 +76 +115 +102 +92 +204 +141 +99 +249 +159 +103 +247 +143 +74 +247 +130 +60 +247 +123 +41 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +248 +138 +64 +249 +152 +92 +249 +174 +124 +250 +197 +158 +82 +69 +65 +47 +40 +38 +152 +119 +47 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +101 +83 +47 +59 +50 +39 +101 +83 +47 +24 +22 +23 +35 +31 +30 +24 +22 +23 +24 +22 +23 +108 +87 +46 +168 +127 +42 +195 +167 +113 +253 +255 +252 +253 +255 +252 +239 +227 +208 +186 +157 +134 +162 +125 +96 +105 +93 +60 +47 +40 +38 +150 +125 +114 +217 +187 +166 +250 +200 +166 +252 +185 +144 +251 +168 +115 +246 +156 +93 +249 +146 +83 +247 +143 +74 +249 +146 +83 +249 +152 +92 +247 +165 +111 +252 +185 +144 +232 +190 +161 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +55 +66 +67 +58 +69 +70 +56 +64 +60 +83 +78 +61 +105 +93 +60 +117 +98 +55 +117 +98 +55 +105 +93 +60 +83 +78 +61 +56 +64 +60 +55 +66 +67 +144 +125 +110 +239 +182 +144 +250 +176 +132 +247 +165 +111 +249 +159 +103 +246 +156 +93 +249 +159 +103 +247 +165 +111 +249 +174 +124 +252 +185 +144 +195 +157 +134 +89 +84 +82 +48 +58 +59 +63 +69 +60 +95 +87 +59 +111 +94 +57 +123 +102 +54 +117 +98 +55 +105 +93 +60 +83 +78 +61 +56 +64 +60 +51 +62 +63 +124 +111 +99 +219 +170 +138 +248 +180 +134 +251 +168 +115 +249 +159 +103 +249 +152 +92 +249 +152 +92 +246 +156 +93 +247 +165 +111 +249 +174 +124 +252 +185 +144 +167 +142 +123 +70 +79 +77 +51 +62 +63 +75 +74 +61 +100 +89 +56 +117 +98 +55 +123 +102 +54 +105 +93 +60 +83 +78 +61 +51 +62 +63 +63 +74 +74 +172 +150 +134 +109 +106 +99 +51 +62 +63 +83 +78 +61 +95 +87 +59 +65 +67 +64 +65 +67 +64 +209 +171 +139 +249 +189 +146 +249 +189 +146 +249 +189 +146 +250 +197 +158 +212 +173 +150 +109 +106 +99 +48 +58 +59 +63 +69 +60 +95 +87 +59 +111 +94 +57 +123 +102 +54 +117 +98 +55 +95 +87 +59 +62 +63 +61 +48 +58 +59 +137 +127 +115 +146 +135 +124 +48 +58 +59 +75 +74 +61 +95 +87 +59 +75 +74 +61 +48 +58 +59 +161 +144 +134 +217 +187 +166 +48 +58 +59 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +137 +127 +115 +255 +215 +190 +251 +209 +178 +250 +200 +166 +250 +200 +166 +250 +200 +166 +172 +150 +134 +77 +85 +81 +48 +58 +59 +69 +69 +61 +95 +87 +59 +111 +94 +57 +123 +102 +54 +117 +98 +55 +100 +89 +56 +75 +74 +61 +56 +64 +60 +55 +66 +67 +133 +120 +107 +236 +186 +153 +251 +192 +154 +249 +189 +146 +251 +192 +154 +250 +200 +166 +253 +212 +188 +161 +144 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +227 +126 +50 +173 +106 +60 +51 +62 +63 +63 +74 +74 +48 +58 +59 +76 +70 +64 +118 +86 +65 +146 +97 +64 +155 +100 +63 +146 +97 +64 +118 +86 +65 +76 +70 +64 +43 +57 +62 +91 +92 +89 +203 +161 +131 +248 +180 +134 +251 +168 +115 +249 +159 +103 +249 +152 +92 +247 +150 +84 +249 +152 +92 +249 +159 +103 +251 +168 +115 +248 +180 +134 +209 +171 +139 +101 +100 +92 +43 +57 +62 +69 +69 +61 +106 +82 +65 +135 +94 +64 +155 +100 +63 +155 +100 +63 +135 +94 +64 +106 +82 +65 +65 +67 +64 +43 +57 +62 +101 +100 +92 +209 +171 +139 +248 +180 +134 +251 +168 +115 +249 +159 +103 +249 +152 +92 +247 +150 +84 +247 +150 +84 +246 +156 +93 +247 +165 +111 +250 +176 +132 +219 +170 +138 +124 +111 +99 +48 +58 +59 +62 +63 +61 +106 +82 +65 +139 +96 +61 +155 +100 +63 +146 +97 +64 +125 +90 +64 +76 +70 +64 +41 +58 +57 +120 +114 +108 +172 +150 +134 +51 +62 +63 +69 +69 +61 +112 +85 +63 +95 +78 +64 +51 +62 +63 +120 +114 +108 +245 +212 +186 +146 +135 +124 +43 +57 +62 +81 +73 +62 +118 +86 +65 +95 +78 +64 +56 +64 +60 +101 +100 +92 +133 +120 +107 +43 +57 +62 +76 +70 +64 +112 +85 +63 +106 +82 +65 +62 +63 +61 +77 +85 +81 +227 +196 +175 +253 +212 +188 +253 +212 +188 +217 +187 +166 +109 +106 +99 +41 +58 +57 +69 +69 +61 +112 +85 +63 +139 +96 +61 +155 +100 +63 +146 +97 +64 +118 +86 +65 +81 +73 +62 +48 +58 +59 +58 +69 +70 +51 +62 +63 +155 +100 +63 +234 +125 +52 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +251 +192 +154 +247 +165 +111 +249 +146 +83 +247 +130 +53 +247 +118 +39 +247 +111 +26 +247 +111 +26 +246 +116 +28 +247 +123 +41 +248 +138 +64 +249 +146 +83 +249 +159 +103 +250 +176 +132 +219 +170 +138 +124 +111 +99 +43 +57 +62 +62 +63 +61 +106 +82 +65 +135 +94 +64 +155 +100 +63 +155 +100 +63 +139 +96 +61 +106 +82 +65 +69 +69 +61 +43 +57 +62 +91 +92 +89 +195 +157 +134 +251 +192 +154 +252 +185 +144 +248 +180 +134 +248 +180 +134 +252 +185 +144 +203 +161 +131 +63 +74 +74 +62 +63 +61 +106 +82 +65 +112 +85 +63 +69 +69 +61 +55 +66 +67 +146 +135 +124 +63 +74 +74 +56 +64 +60 +95 +78 +64 +112 +85 +63 +76 +70 +64 +48 +58 +59 +172 +150 +134 +253 +204 +176 +251 +209 +178 +251 +209 +178 +187 +166 +150 +77 +85 +81 +48 +58 +59 +81 +73 +62 +125 +90 +64 +146 +97 +64 +155 +100 +63 +139 +96 +61 +95 +78 +64 +56 +64 +60 +58 +69 +70 +161 +144 +134 +109 +106 +99 +51 +62 +63 +95 +78 +64 +112 +85 +63 +65 +67 +64 +65 +67 +64 +204 +141 +99 +246 +156 +93 +250 +139 +73 +247 +130 +53 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +246 +116 +28 +247 +130 +53 +247 +143 +74 +249 +159 +103 +252 +185 +144 +209 +171 +139 +24 +22 +23 +85 +71 +43 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +137 +110 +49 +47 +40 +38 +137 +110 +49 +101 +83 +47 +59 +50 +39 +59 +50 +39 +101 +83 +47 +158 +125 +46 +160 +120 +43 +192 +155 +91 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +237 +233 +225 +152 +147 +147 +81 +77 +76 +55 +48 +48 +115 +102 +92 +212 +173 +150 +251 +192 +154 +249 +174 +124 +247 +165 +111 +249 +159 +103 +249 +159 +103 +247 +165 +111 +249 +174 +124 +249 +189 +146 +238 +205 +179 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +43 +57 +62 +95 +87 +59 +145 +114 +49 +168 +127 +42 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +168 +127 +42 +145 +114 +49 +95 +87 +59 +48 +58 +59 +109 +106 +99 +236 +186 +153 +252 +185 +144 +248 +180 +134 +250 +176 +132 +250 +176 +132 +252 +185 +144 +251 +192 +154 +150 +125 +114 +48 +58 +59 +69 +69 +61 +117 +98 +55 +158 +125 +46 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +168 +127 +42 +152 +119 +47 +100 +89 +56 +56 +64 +60 +63 +74 +74 +186 +157 +134 +249 +189 +146 +248 +180 +134 +249 +174 +124 +249 +174 +124 +250 +176 +132 +252 +185 +144 +251 +192 +154 +133 +120 +107 +48 +58 +59 +75 +74 +61 +137 +110 +49 +168 +127 +42 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +145 +114 +49 +75 +74 +61 +43 +57 +62 +51 +62 +63 +123 +102 +54 +171 +129 +45 +171 +129 +45 +145 +114 +49 +56 +64 +60 +133 +120 +107 +253 +212 +188 +251 +209 +178 +253 +212 +188 +194 +173 +157 +63 +74 +74 +56 +64 +60 +111 +94 +57 +158 +125 +46 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +158 +125 +46 +105 +93 +60 +51 +62 +63 +43 +57 +62 +88 +82 +59 +168 +127 +42 +171 +129 +45 +168 +127 +42 +88 +82 +59 +63 +74 +74 +187 +166 +150 +55 +66 +67 +111 +94 +57 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +137 +127 +115 +255 +215 +190 +255 +215 +190 +255 +215 +190 +245 +212 +186 +133 +120 +107 +48 +58 +59 +75 +74 +61 +129 +106 +52 +158 +125 +46 +171 +129 +45 +171 +129 +45 +171 +129 +45 +168 +127 +42 +171 +129 +45 +168 +127 +42 +145 +114 +49 +95 +87 +59 +51 +62 +63 +77 +85 +81 +212 +173 +150 +253 +204 +176 +253 +204 +176 +251 +209 +178 +255 +215 +190 +161 +144 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +227 +126 +50 +183 +110 +59 +41 +58 +57 +69 +69 +61 +155 +100 +63 +214 +121 +50 +234 +126 +45 +234 +126 +45 +234 +126 +45 +234 +126 +45 +234 +126 +45 +224 +123 +55 +155 +100 +63 +69 +69 +61 +51 +62 +63 +178 +146 +122 +249 +189 +146 +250 +176 +132 +251 +168 +115 +251 +168 +115 +249 +174 +124 +250 +176 +132 +249 +189 +146 +167 +142 +123 +55 +66 +67 +65 +67 +64 +146 +97 +64 +212 +120 +56 +234 +126 +45 +234 +125 +52 +234 +126 +45 +234 +125 +52 +234 +126 +45 +234 +125 +52 +209 +117 +53 +146 +97 +64 +65 +67 +64 +55 +66 +67 +178 +146 +122 +249 +189 +146 +250 +176 +132 +251 +168 +115 +247 +165 +111 +251 +168 +115 +249 +174 +124 +252 +185 +144 +203 +161 +131 +63 +74 +74 +56 +64 +60 +125 +90 +64 +209 +117 +53 +234 +126 +45 +234 +126 +45 +234 +125 +52 +234 +126 +45 +234 +126 +45 +214 +121 +50 +146 +97 +64 +56 +64 +60 +41 +58 +57 +81 +73 +62 +209 +117 +53 +234 +126 +45 +234 +126 +45 +125 +90 +64 +51 +62 +63 +176 +156 +141 +55 +66 +67 +106 +82 +65 +225 +124 +48 +234 +126 +45 +234 +126 +45 +146 +97 +64 +41 +58 +57 +43 +57 +62 +125 +90 +64 +214 +121 +50 +234 +126 +45 +234 +126 +45 +183 +110 +59 +56 +64 +60 +137 +127 +115 +255 +215 +190 +194 +173 +157 +63 +74 +74 +62 +63 +61 +146 +97 +64 +214 +121 +50 +234 +125 +52 +234 +126 +45 +234 +125 +52 +234 +125 +52 +234 +126 +45 +225 +124 +48 +173 +106 +60 +81 +73 +62 +35 +56 +60 +155 +100 +63 +234 +125 +52 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +251 +192 +154 +247 +165 +111 +249 +146 +83 +247 +130 +53 +247 +118 +39 +246 +116 +28 +246 +116 +28 +247 +123 +41 +247 +130 +60 +249 +146 +83 +247 +165 +111 +248 +180 +134 +186 +157 +134 +58 +69 +70 +56 +64 +60 +135 +94 +64 +199 +115 +54 +234 +125 +52 +234 +126 +45 +234 +125 +52 +234 +125 +52 +234 +126 +45 +234 +125 +52 +212 +120 +56 +155 +100 +63 +76 +70 +64 +51 +62 +63 +146 +135 +124 +251 +209 +178 +253 +204 +176 +250 +200 +166 +253 +204 +176 +101 +100 +92 +69 +69 +61 +194 +112 +58 +234 +126 +45 +234 +126 +45 +199 +115 +54 +65 +67 +64 +35 +56 +60 +81 +73 +62 +194 +112 +58 +234 +125 +52 +234 +126 +45 +214 +121 +50 +95 +78 +64 +63 +74 +74 +238 +205 +179 +255 +215 +190 +161 +144 +134 +43 +57 +62 +81 +73 +62 +173 +106 +60 +225 +124 +48 +234 +126 +45 +234 +126 +45 +234 +125 +52 +234 +126 +45 +234 +126 +45 +194 +112 +58 +95 +78 +64 +41 +58 +57 +48 +58 +59 +155 +100 +63 +234 +126 +45 +234 +126 +45 +199 +115 +54 +69 +69 +61 +99 +90 +79 +251 +168 +115 +247 +150 +84 +247 +130 +60 +247 +123 +41 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +103 +7 +247 +111 +26 +247 +118 +39 +247 +130 +60 +247 +150 +84 +249 +174 +124 +251 +192 +154 +124 +111 +99 +35 +31 +30 +137 +110 +49 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +47 +40 +38 +108 +87 +46 +175 +132 +40 +161 +127 +40 +168 +127 +42 +171 +129 +45 +158 +125 +46 +152 +119 +47 +203 +161 +131 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +186 +181 +179 +89 +84 +82 +47 +40 +38 +139 +115 +96 +236 +186 +153 +252 +185 +144 +250 +176 +132 +249 +174 +124 +250 +176 +132 +252 +185 +144 +250 +197 +158 +238 +205 +179 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +111 +94 +57 +171 +129 +45 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +171 +129 +45 +111 +94 +57 +48 +58 +59 +109 +106 +99 +253 +204 +176 +250 +200 +166 +250 +200 +166 +250 +200 +166 +253 +204 +176 +137 +127 +115 +43 +57 +62 +88 +82 +59 +158 +125 +46 +171 +129 +45 +161 +127 +40 +158 +125 +46 +158 +125 +46 +168 +127 +42 +161 +127 +40 +158 +125 +46 +158 +125 +46 +168 +127 +42 +171 +129 +45 +145 +114 +49 +69 +69 +61 +51 +62 +63 +187 +166 +150 +250 +200 +166 +250 +197 +158 +251 +192 +154 +250 +197 +158 +253 +204 +176 +133 +120 +107 +48 +58 +59 +95 +87 +59 +168 +127 +42 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +158 +125 +46 +75 +74 +61 +62 +63 +61 +168 +127 +42 +161 +127 +40 +158 +125 +46 +171 +129 +45 +83 +78 +61 +91 +92 +89 +255 +215 +190 +255 +215 +190 +207 +178 +158 +58 +69 +70 +63 +69 +60 +145 +114 +49 +171 +129 +45 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +171 +129 +45 +105 +93 +60 +43 +57 +62 +137 +110 +49 +171 +129 +45 +158 +125 +46 +171 +129 +45 +137 +110 +49 +51 +62 +63 +146 +135 +124 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +152 +119 +47 +65 +67 +64 +137 +127 +115 +255 +215 +190 +255 +215 +190 +245 +212 +186 +120 +114 +108 +48 +58 +59 +100 +89 +56 +168 +127 +42 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +171 +129 +45 +129 +106 +52 +61 +67 +58 +63 +74 +74 +207 +178 +158 +255 +215 +190 +255 +215 +190 +255 +215 +190 +161 +144 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +234 +125 +52 +173 +106 +60 +95 +78 +64 +209 +117 +53 +234 +126 +45 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +126 +45 +209 +117 +53 +89 +75 +66 +51 +62 +63 +187 +166 +150 +250 +197 +158 +251 +192 +154 +249 +189 +146 +251 +192 +154 +250 +200 +166 +161 +144 +134 +41 +58 +57 +95 +78 +64 +199 +115 +54 +234 +126 +45 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +126 +45 +199 +115 +54 +89 +75 +66 +41 +58 +57 +167 +142 +123 +250 +200 +166 +251 +192 +154 +252 +185 +144 +249 +189 +146 +250 +197 +158 +212 +173 +150 +63 +74 +74 +69 +69 +61 +183 +110 +59 +234 +126 +45 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +126 +45 +163 +104 +61 +41 +58 +57 +135 +94 +64 +234 +126 +45 +224 +123 +55 +234 +125 +52 +188 +112 +56 +51 +62 +63 +109 +106 +99 +51 +62 +63 +188 +112 +56 +234 +126 +45 +224 +123 +55 +234 +125 +52 +188 +112 +56 +43 +57 +62 +112 +85 +63 +234 +126 +45 +227 +126 +50 +224 +123 +55 +227 +126 +50 +234 +126 +45 +95 +78 +64 +109 +106 +99 +217 +187 +166 +58 +69 +70 +69 +69 +61 +188 +112 +56 +234 +126 +45 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +125 +52 +214 +121 +50 +95 +78 +64 +146 +97 +64 +234 +125 +52 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +251 +192 +154 +247 +165 +111 +249 +146 +83 +247 +130 +53 +247 +123 +41 +247 +118 +39 +247 +123 +41 +247 +130 +53 +247 +143 +74 +249 +159 +103 +250 +176 +132 +186 +157 +134 +51 +62 +63 +81 +73 +62 +188 +112 +56 +234 +126 +45 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +126 +45 +212 +120 +56 +106 +82 +65 +41 +58 +57 +146 +135 +124 +255 +215 +190 +255 +215 +190 +234 +204 +183 +63 +74 +74 +125 +90 +64 +234 +126 +45 +224 +123 +55 +227 +126 +50 +234 +125 +52 +89 +75 +66 +62 +63 +61 +199 +115 +54 +234 +126 +45 +224 +123 +55 +224 +123 +55 +234 +126 +45 +163 +104 +61 +48 +58 +59 +217 +187 +166 +172 +150 +134 +41 +58 +57 +106 +82 +65 +214 +121 +50 +234 +126 +45 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +225 +124 +48 +81 +73 +62 +69 +69 +61 +227 +126 +50 +227 +126 +50 +224 +123 +55 +238 +123 +45 +125 +90 +64 +55 +66 +67 +250 +176 +132 +246 +156 +93 +250 +139 +73 +247 +123 +41 +247 +111 +26 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +250 +139 +73 +249 +159 +103 +248 +180 +134 +232 +190 +161 +47 +40 +38 +71 +60 +43 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +71 +60 +43 +71 +60 +43 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +160 +120 +43 +170 +137 +67 +237 +233 +225 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +186 +181 +179 +74 +68 +68 +89 +75 +66 +212 +173 +150 +250 +197 +158 +251 +192 +154 +249 +189 +146 +251 +192 +154 +253 +204 +176 +234 +204 +183 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +152 +119 +47 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +171 +129 +45 +171 +129 +45 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +111 +94 +57 +48 +58 +59 +161 +144 +134 +255 +215 +190 +255 +215 +190 +255 +215 +190 +172 +150 +134 +48 +58 +59 +95 +87 +59 +168 +127 +42 +168 +127 +42 +158 +125 +46 +161 +127 +40 +171 +129 +45 +158 +125 +46 +152 +119 +47 +152 +119 +47 +168 +127 +42 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +152 +119 +47 +69 +69 +61 +58 +69 +70 +217 +187 +166 +255 +215 +190 +255 +215 +190 +255 +215 +190 +172 +150 +134 +43 +57 +62 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +171 +129 +45 +171 +129 +45 +171 +129 +45 +158 +125 +46 +168 +127 +42 +137 +110 +49 +83 +78 +61 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +88 +82 +59 +84 +85 +82 +255 +215 +190 +238 +205 +179 +84 +85 +82 +62 +63 +61 +145 +114 +49 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +171 +129 +45 +171 +129 +45 +171 +129 +45 +168 +127 +42 +161 +127 +40 +158 +125 +46 +88 +82 +59 +152 +119 +47 +161 +127 +40 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +137 +127 +115 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +152 +119 +47 +63 +69 +60 +137 +127 +115 +255 +215 +190 +255 +215 +190 +137 +127 +115 +48 +58 +59 +105 +93 +60 +171 +129 +45 +161 +127 +40 +158 +125 +46 +168 +127 +42 +168 +127 +42 +158 +125 +46 +152 +119 +47 +152 +119 +47 +168 +127 +42 +171 +129 +45 +158 +125 +46 +158 +125 +46 +171 +129 +45 +145 +114 +49 +62 +63 +61 +70 +79 +77 +227 +196 +175 +255 +215 +190 +255 +215 +190 +161 +144 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +227 +126 +50 +212 +120 +56 +214 +121 +50 +227 +126 +50 +224 +123 +55 +227 +126 +50 +234 +126 +45 +234 +126 +45 +234 +125 +52 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +209 +117 +53 +76 +70 +64 +70 +79 +77 +234 +204 +183 +253 +212 +188 +251 +209 +178 +253 +212 +188 +187 +166 +150 +43 +57 +62 +95 +78 +64 +225 +124 +48 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +125 +52 +234 +126 +45 +234 +126 +45 +227 +126 +50 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +125 +52 +214 +121 +50 +95 +78 +64 +48 +58 +59 +194 +173 +157 +253 +212 +188 +251 +209 +178 +251 +209 +178 +245 +212 +186 +91 +92 +89 +62 +63 +61 +188 +112 +56 +234 +126 +45 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +125 +52 +234 +125 +52 +234 +126 +45 +227 +126 +50 +224 +123 +55 +234 +126 +45 +125 +90 +64 +146 +97 +64 +234 +125 +52 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +97 +98 +96 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +224 +123 +55 +212 +120 +56 +183 +110 +59 +214 +121 +50 +227 +126 +50 +224 +123 +55 +227 +126 +50 +227 +126 +50 +234 +126 +45 +95 +78 +64 +84 +85 +82 +91 +92 +89 +62 +63 +61 +188 +112 +56 +234 +126 +45 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +125 +52 +234 +126 +45 +234 +126 +45 +227 +126 +50 +224 +123 +55 +227 +126 +50 +224 +123 +55 +209 +117 +53 +227 +126 +50 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +251 +192 +154 +247 +165 +111 +249 +146 +83 +247 +130 +60 +247 +123 +41 +247 +123 +41 +247 +130 +53 +248 +138 +64 +249 +152 +92 +249 +174 +124 +209 +171 +139 +58 +69 +70 +81 +73 +62 +209 +117 +53 +234 +125 +52 +224 +123 +55 +224 +123 +55 +227 +126 +50 +227 +126 +50 +234 +125 +52 +234 +125 +52 +234 +125 +52 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +227 +126 +50 +112 +85 +63 +41 +58 +57 +172 +150 +134 +255 +215 +190 +227 +196 +175 +63 +74 +74 +135 +94 +64 +234 +125 +52 +224 +123 +55 +224 +123 +55 +224 +123 +55 +194 +112 +58 +199 +115 +54 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +238 +128 +40 +163 +104 +61 +55 +66 +67 +161 +144 +134 +58 +69 +70 +95 +78 +64 +225 +124 +48 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +227 +126 +50 +234 +126 +45 +234 +126 +45 +234 +125 +52 +227 +126 +50 +234 +125 +52 +173 +106 +60 +118 +86 +65 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +125 +52 +146 +97 +64 +51 +62 +63 +252 +185 +144 +249 +159 +103 +247 +143 +74 +247 +130 +53 +246 +116 +28 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +111 +26 +247 +118 +39 +247 +130 +53 +249 +146 +83 +251 +168 +115 +251 +192 +154 +154 +133 +118 +24 +22 +23 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +108 +87 +46 +47 +40 +38 +158 +125 +46 +158 +125 +46 +158 +125 +46 +160 +120 +43 +156 +125 +62 +224 +207 +180 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +152 +147 +147 +35 +31 +30 +55 +48 +48 +154 +133 +118 +217 +187 +166 +253 +204 +176 +253 +204 +176 +253 +212 +188 +234 +204 +183 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +158 +125 +46 +168 +127 +42 +158 +125 +46 +123 +102 +54 +105 +93 +60 +111 +94 +57 +129 +106 +52 +168 +127 +42 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +83 +78 +61 +58 +69 +70 +227 +196 +175 +255 +215 +190 +217 +187 +166 +58 +69 +70 +75 +74 +61 +168 +127 +42 +161 +127 +40 +158 +125 +46 +168 +127 +42 +152 +119 +47 +105 +93 +60 +69 +69 +61 +62 +63 +61 +62 +63 +61 +75 +74 +61 +117 +98 +55 +161 +127 +40 +161 +127 +40 +158 +125 +46 +171 +129 +45 +145 +114 +49 +56 +64 +60 +97 +98 +96 +245 +212 +186 +255 +215 +190 +227 +196 +175 +63 +74 +74 +75 +74 +61 +158 +125 +46 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +158 +125 +46 +129 +106 +52 +111 +94 +57 +105 +93 +60 +129 +106 +52 +158 +125 +46 +168 +127 +42 +161 +127 +40 +152 +119 +47 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +84 +85 +82 +255 +215 +190 +161 +144 +134 +48 +58 +59 +123 +102 +54 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +117 +98 +55 +105 +93 +60 +117 +98 +55 +145 +114 +49 +171 +129 +45 +168 +127 +42 +152 +119 +47 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +137 +127 +115 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +137 +127 +115 +255 +215 +190 +194 +173 +157 +48 +58 +59 +88 +82 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +152 +119 +47 +95 +87 +59 +69 +69 +61 +62 +63 +61 +62 +63 +61 +83 +78 +61 +123 +102 +54 +168 +127 +42 +161 +127 +40 +158 +125 +46 +171 +129 +45 +129 +106 +52 +51 +62 +63 +120 +114 +108 +255 +215 +190 +255 +215 +190 +161 +144 +134 +56 +64 +60 +199 +115 +54 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +227 +126 +50 +227 +126 +50 +227 +126 +50 +188 +112 +56 +146 +97 +64 +135 +94 +64 +146 +97 +64 +199 +115 +54 +234 +125 +52 +224 +123 +55 +224 +123 +55 +224 +123 +55 +234 +126 +45 +173 +106 +60 +48 +58 +59 +146 +135 +124 +255 +215 +190 +255 +215 +190 +234 +204 +183 +77 +85 +81 +76 +70 +64 +214 +121 +50 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +125 +52 +214 +121 +50 +163 +104 +61 +135 +94 +64 +135 +94 +64 +163 +104 +61 +224 +123 +55 +234 +125 +52 +224 +123 +55 +224 +123 +55 +227 +126 +50 +212 +120 +56 +76 +70 +64 +77 +85 +81 +238 +205 +179 +255 +215 +190 +255 +215 +190 +161 +144 +134 +48 +58 +59 +155 +100 +63 +234 +126 +45 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +125 +52 +199 +115 +54 +155 +100 +63 +135 +94 +64 +146 +97 +64 +188 +112 +56 +227 +126 +50 +227 +126 +50 +214 +121 +50 +209 +117 +53 +227 +126 +50 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +101 +100 +92 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +234 +125 +52 +227 +126 +50 +224 +123 +55 +227 +126 +50 +227 +126 +50 +199 +115 +54 +125 +90 +64 +51 +62 +63 +55 +66 +67 +41 +58 +57 +146 +97 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +224 +123 +55 +234 +126 +45 +209 +117 +53 +155 +100 +63 +135 +94 +64 +139 +96 +61 +183 +110 +59 +227 +126 +50 +227 +126 +50 +227 +126 +50 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +251 +192 +154 +247 +165 +111 +249 +146 +83 +247 +130 +60 +247 +130 +53 +247 +130 +53 +247 +130 +60 +249 +146 +83 +247 +165 +111 +252 +185 +144 +101 +100 +92 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +227 +126 +50 +173 +106 +60 +135 +94 +64 +135 +94 +64 +163 +104 +61 +214 +121 +50 +234 +125 +52 +224 +123 +55 +224 +123 +55 +227 +126 +50 +224 +123 +55 +81 +73 +62 +58 +69 +70 +227 +196 +175 +234 +204 +183 +63 +74 +74 +135 +94 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +227 +126 +50 +224 +123 +55 +227 +126 +50 +234 +125 +52 +212 +120 +56 +155 +100 +63 +69 +69 +61 +76 +78 +76 +84 +85 +82 +65 +67 +64 +209 +117 +53 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +227 +126 +50 +183 +110 +59 +139 +96 +61 +135 +94 +64 +155 +100 +63 +209 +117 +53 +234 +125 +52 +224 +123 +55 +212 +120 +56 +224 +123 +55 +224 +123 +55 +224 +123 +55 +234 +126 +45 +139 +96 +61 +55 +66 +67 +251 +192 +154 +251 +168 +115 +249 +146 +83 +247 +130 +53 +247 +118 +39 +246 +109 +10 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +248 +138 +64 +249 +152 +92 +250 +176 +132 +232 +190 +161 +65 +58 +56 +59 +50 +39 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +47 +40 +38 +129 +106 +52 +168 +127 +42 +160 +120 +43 +158 +125 +46 +224 +207 +180 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +219 +212 +208 +62 +63 +61 +35 +31 +30 +91 +92 +89 +164 +158 +157 +186 +181 +179 +82 +69 +65 +176 +156 +141 +255 +215 +190 +255 +215 +190 +238 +205 +179 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +129 +106 +52 +65 +67 +64 +48 +58 +59 +55 +66 +67 +55 +66 +67 +48 +58 +59 +83 +78 +61 +145 +114 +49 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +137 +110 +49 +51 +62 +63 +146 +135 +124 +255 +215 +190 +120 +114 +108 +56 +64 +60 +145 +114 +49 +171 +129 +45 +158 +125 +46 +168 +127 +42 +152 +119 +47 +69 +69 +61 +43 +57 +62 +109 +106 +99 +146 +135 +124 +137 +127 +115 +91 +92 +89 +43 +57 +62 +88 +82 +59 +158 +125 +46 +161 +127 +40 +158 +125 +46 +171 +129 +45 +117 +98 +55 +48 +58 +59 +172 +150 +134 +255 +215 +190 +146 +135 +124 +51 +62 +63 +137 +110 +49 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +75 +74 +61 +48 +58 +59 +55 +66 +67 +55 +66 +67 +48 +58 +59 +69 +69 +61 +137 +110 +49 +168 +127 +42 +161 +127 +40 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +91 +92 +89 +234 +204 +183 +70 +79 +77 +83 +78 +61 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +111 +94 +57 +56 +64 +60 +43 +57 +62 +58 +69 +70 +48 +58 +59 +56 +64 +60 +100 +89 +56 +158 +125 +46 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +137 +127 +115 +58 +69 +70 +111 +94 +57 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +65 +67 +64 +137 +127 +115 +255 +215 +190 +97 +98 +96 +62 +63 +61 +152 +119 +47 +168 +127 +42 +158 +125 +46 +168 +127 +42 +137 +110 +49 +62 +63 +61 +51 +62 +63 +120 +114 +108 +146 +135 +124 +137 +127 +115 +84 +85 +82 +43 +57 +62 +95 +87 +59 +168 +127 +42 +158 +125 +46 +158 +125 +46 +171 +129 +45 +100 +89 +56 +43 +57 +62 +194 +173 +157 +255 +215 +190 +161 +144 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +224 +123 +55 +118 +86 +65 +51 +62 +63 +43 +57 +62 +58 +69 +70 +41 +58 +57 +56 +64 +60 +146 +97 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +125 +52 +106 +82 +65 +63 +74 +74 +234 +204 +183 +255 +215 +190 +161 +144 +134 +48 +58 +59 +173 +106 +60 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +125 +52 +183 +110 +59 +76 +70 +64 +43 +57 +62 +55 +66 +67 +55 +66 +67 +48 +58 +59 +81 +73 +62 +183 +110 +59 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +126 +45 +163 +104 +61 +48 +58 +59 +161 +144 +134 +255 +215 +190 +234 +204 +183 +63 +74 +74 +95 +78 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +227 +126 +50 +227 +126 +50 +135 +94 +64 +62 +63 +61 +43 +57 +62 +58 +69 +70 +43 +57 +62 +51 +62 +63 +125 +90 +64 +225 +124 +48 +227 +126 +50 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +97 +98 +96 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +234 +125 +52 +227 +126 +50 +173 +106 +60 +95 +78 +64 +56 +64 +60 +51 +62 +63 +120 +114 +108 +70 +79 +77 +89 +75 +66 +225 +124 +48 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +126 +45 +163 +104 +61 +65 +67 +64 +41 +58 +57 +55 +66 +67 +51 +62 +63 +48 +58 +59 +106 +82 +65 +209 +117 +53 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +251 +192 +154 +247 +165 +111 +249 +146 +83 +248 +138 +64 +247 +130 +53 +247 +130 +60 +250 +139 +73 +246 +156 +93 +250 +176 +132 +186 +157 +134 +41 +58 +57 +146 +97 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +234 +125 +52 +199 +115 +54 +89 +75 +66 +48 +58 +59 +51 +62 +63 +55 +66 +67 +43 +57 +62 +76 +70 +64 +173 +106 +60 +234 +125 +52 +224 +123 +55 +224 +123 +55 +227 +126 +50 +183 +110 +59 +51 +62 +63 +137 +127 +115 +234 +204 +183 +63 +74 +74 +135 +94 +64 +234 +125 +52 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +126 +45 +199 +115 +54 +125 +90 +64 +69 +69 +61 +41 +58 +57 +97 +98 +96 +146 +135 +124 +51 +62 +63 +146 +97 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +227 +126 +50 +214 +121 +50 +106 +82 +65 +48 +58 +59 +51 +62 +63 +55 +66 +67 +41 +58 +57 +65 +67 +64 +163 +104 +61 +234 +126 +45 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +234 +125 +52 +139 +96 +61 +55 +66 +67 +250 +197 +158 +251 +168 +115 +247 +150 +84 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +246 +116 +28 +247 +130 +53 +247 +143 +74 +249 +159 +103 +252 +185 +144 +154 +133 +118 +24 +22 +23 +108 +87 +46 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +71 +60 +43 +85 +71 +43 +171 +129 +45 +160 +120 +43 +216 +194 +154 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +237 +233 +225 +65 +58 +56 +62 +63 +61 +219 +212 +208 +253 +255 +252 +237 +233 +225 +120 +114 +108 +35 +31 +30 +55 +48 +48 +227 +196 +175 +255 +215 +190 +238 +205 +179 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +129 +106 +52 +51 +62 +63 +84 +85 +82 +187 +166 +150 +227 +196 +175 +227 +196 +175 +161 +144 +134 +51 +62 +63 +69 +69 +61 +152 +119 +47 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +91 +92 +89 +217 +187 +166 +55 +66 +67 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +75 +74 +61 +58 +69 +70 +187 +166 +150 +255 +215 +190 +255 +215 +190 +255 +215 +190 +245 +212 +186 +161 +144 +134 +43 +57 +62 +100 +89 +56 +171 +129 +45 +158 +125 +46 +158 +125 +46 +161 +127 +40 +75 +74 +61 +84 +85 +82 +234 +204 +183 +76 +78 +76 +88 +82 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +62 +63 +61 +63 +74 +74 +176 +156 +141 +227 +196 +175 +227 +196 +175 +176 +156 +141 +70 +79 +77 +62 +63 +61 +145 +114 +49 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +97 +98 +96 +172 +150 +134 +48 +58 +59 +129 +106 +52 +168 +127 +42 +158 +125 +46 +158 +125 +46 +171 +129 +45 +105 +93 +60 +43 +57 +62 +120 +114 +108 +207 +178 +158 +227 +196 +175 +217 +187 +166 +120 +114 +108 +41 +58 +57 +95 +87 +59 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +56 +64 +60 +137 +127 +115 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +65 +67 +64 +146 +135 +124 +207 +178 +158 +48 +58 +59 +111 +94 +57 +171 +129 +45 +158 +125 +46 +168 +127 +42 +152 +119 +47 +62 +63 +61 +70 +79 +77 +207 +178 +158 +255 +215 +190 +255 +215 +190 +255 +215 +190 +238 +205 +179 +137 +127 +115 +43 +57 +62 +117 +98 +55 +168 +127 +42 +158 +125 +46 +168 +127 +42 +152 +119 +47 +62 +63 +61 +109 +106 +99 +255 +215 +190 +161 +144 +134 +56 +64 +60 +199 +115 +54 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +227 +126 +50 +106 +82 +65 +41 +58 +57 +137 +127 +115 +217 +187 +166 +227 +196 +175 +207 +178 +158 +109 +106 +99 +41 +58 +57 +146 +97 +64 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +125 +52 +173 +106 +60 +48 +58 +59 +176 +156 +141 +245 +212 +186 +70 +79 +77 +95 +78 +64 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +125 +52 +188 +112 +56 +56 +64 +60 +70 +79 +77 +176 +156 +141 +227 +196 +175 +227 +196 +175 +176 +156 +141 +63 +74 +74 +62 +63 +61 +194 +112 +58 +227 +126 +50 +224 +123 +55 +227 +126 +50 +227 +126 +50 +95 +78 +64 +77 +85 +81 +245 +212 +186 +172 +150 +134 +48 +58 +59 +173 +106 +60 +234 +126 +45 +224 +123 +55 +224 +123 +55 +234 +125 +52 +135 +94 +64 +35 +56 +60 +120 +114 +108 +207 +178 +158 +227 +196 +175 +217 +187 +166 +133 +120 +107 +35 +56 +60 +118 +86 +65 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +101 +100 +92 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +194 +112 +58 +95 +78 +64 +48 +58 +59 +70 +79 +77 +146 +135 +124 +217 +187 +166 +207 +178 +158 +51 +62 +63 +155 +100 +63 +234 +126 +45 +224 +123 +55 +224 +123 +55 +234 +125 +52 +163 +104 +61 +48 +58 +59 +91 +92 +89 +194 +173 +157 +227 +196 +175 +217 +187 +166 +146 +135 +124 +43 +57 +62 +89 +75 +66 +214 +121 +50 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +251 +192 +154 +247 +165 +111 +247 +150 +84 +248 +138 +64 +247 +130 +60 +248 +138 +64 +249 +146 +83 +247 +165 +111 +239 +182 +144 +91 +92 +89 +76 +70 +64 +224 +123 +55 +227 +126 +50 +224 +123 +55 +227 +126 +50 +209 +117 +53 +76 +70 +64 +55 +66 +67 +172 +150 +134 +227 +196 +175 +227 +196 +175 +187 +166 +150 +77 +85 +81 +51 +62 +63 +173 +106 +60 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +126 +45 +118 +86 +65 +58 +69 +70 +217 +187 +166 +70 +79 +77 +135 +94 +64 +234 +125 +52 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +225 +124 +48 +125 +90 +64 +56 +64 +60 +55 +66 +67 +120 +114 +108 +187 +166 +150 +245 +212 +186 +120 +114 +108 +76 +70 +64 +214 +121 +50 +227 +126 +50 +224 +123 +55 +227 +126 +50 +225 +124 +48 +95 +78 +64 +43 +57 +62 +146 +135 +124 +217 +187 +166 +227 +196 +175 +194 +173 +157 +91 +92 +89 +48 +58 +59 +163 +104 +61 +234 +125 +52 +224 +123 +55 +224 +123 +55 +224 +123 +55 +234 +126 +45 +139 +96 +61 +55 +66 +67 +250 +197 +158 +249 +174 +124 +247 +150 +84 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +111 +26 +247 +118 +39 +247 +130 +53 +249 +146 +83 +251 +168 +115 +239 +182 +144 +65 +58 +56 +59 +50 +39 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +108 +87 +46 +47 +40 +38 +152 +119 +47 +170 +137 +67 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +174 +168 +167 +24 +22 +23 +109 +106 +99 +152 +147 +147 +97 +98 +96 +47 +40 +38 +24 +22 +23 +35 +31 +30 +35 +31 +30 +176 +156 +141 +255 +215 +190 +238 +205 +179 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +69 +69 +61 +76 +78 +76 +227 +196 +175 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +187 +166 +150 +51 +62 +63 +95 +87 +59 +168 +127 +42 +158 +125 +46 +158 +125 +46 +171 +129 +45 +117 +98 +55 +55 +66 +67 +109 +106 +99 +48 +58 +59 +137 +110 +49 +168 +127 +42 +158 +125 +46 +168 +127 +42 +117 +98 +55 +48 +58 +59 +187 +166 +150 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +137 +127 +115 +51 +62 +63 +145 +114 +49 +168 +127 +42 +158 +125 +46 +171 +129 +45 +117 +98 +55 +55 +66 +67 +137 +127 +115 +55 +66 +67 +123 +102 +54 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +55 +66 +67 +207 +178 +158 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +217 +187 +166 +58 +69 +70 +83 +78 +61 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +88 +82 +59 +91 +92 +89 +109 +106 +99 +69 +69 +61 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +120 +114 +108 +245 +212 +186 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +137 +127 +115 +48 +58 +59 +129 +106 +52 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +137 +127 +115 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +65 +67 +64 +146 +135 +124 +146 +135 +124 +62 +63 +61 +152 +119 +47 +168 +127 +42 +158 +125 +46 +168 +127 +42 +100 +89 +56 +51 +62 +63 +207 +178 +158 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +109 +106 +99 +63 +69 +60 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +100 +89 +56 +51 +62 +63 +227 +196 +175 +172 +150 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +126 +45 +155 +100 +63 +41 +58 +57 +146 +135 +124 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +245 +212 +186 +109 +106 +99 +56 +64 +60 +199 +115 +54 +227 +126 +50 +224 +123 +55 +227 +126 +50 +224 +123 +55 +76 +70 +64 +109 +106 +99 +194 +173 +157 +43 +57 +62 +163 +104 +61 +234 +125 +52 +224 +123 +55 +224 +123 +55 +225 +124 +48 +89 +75 +66 +63 +74 +74 +217 +187 +166 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +217 +187 +166 +58 +69 +70 +95 +78 +64 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +126 +45 +155 +100 +63 +43 +57 +62 +207 +178 +158 +109 +106 +99 +76 +70 +64 +224 +123 +55 +227 +126 +50 +224 +123 +55 +227 +126 +50 +194 +112 +58 +51 +62 +63 +120 +114 +108 +253 +212 +188 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +137 +127 +115 +48 +58 +59 +173 +106 +60 +234 +125 +52 +224 +123 +55 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +101 +100 +92 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +188 +112 +56 +62 +63 +61 +58 +69 +70 +161 +144 +134 +234 +204 +183 +255 +215 +190 +255 +215 +190 +137 +127 +115 +62 +63 +61 +209 +117 +53 +227 +126 +50 +224 +123 +55 +227 +126 +50 +212 +120 +56 +69 +69 +61 +77 +85 +81 +234 +204 +183 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +176 +156 +141 +35 +56 +60 +135 +94 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +251 +192 +154 +251 +168 +115 +247 +150 +84 +250 +139 +73 +248 +138 +64 +250 +139 +73 +249 +152 +92 +249 +174 +124 +209 +171 +139 +43 +57 +62 +135 +94 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +234 +126 +45 +112 +85 +63 +51 +62 +63 +194 +173 +157 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +227 +196 +175 +70 +79 +77 +76 +70 +64 +214 +121 +50 +227 +126 +50 +224 +123 +55 +227 +126 +50 +183 +110 +59 +48 +58 +59 +146 +135 +124 +77 +85 +81 +135 +94 +64 +234 +125 +52 +224 +123 +55 +224 +123 +55 +227 +126 +50 +214 +121 +50 +95 +78 +64 +35 +56 +60 +120 +114 +108 +217 +187 +166 +255 +215 +190 +255 +215 +190 +227 +196 +175 +58 +69 +70 +125 +90 +64 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +125 +52 +139 +96 +61 +41 +58 +57 +172 +150 +134 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +234 +204 +183 +77 +85 +81 +76 +70 +64 +214 +121 +50 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +125 +52 +139 +96 +61 +51 +62 +63 +250 +200 +166 +249 +174 +124 +249 +152 +92 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +111 +26 +247 +123 +41 +248 +138 +64 +249 +152 +92 +249 +174 +124 +178 +146 +122 +24 +22 +23 +101 +83 +47 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +152 +119 +47 +47 +40 +38 +123 +102 +54 +209 +171 +139 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +164 +158 +157 +24 +22 +23 +24 +22 +23 +24 +22 +23 +24 +22 +23 +24 +22 +23 +35 +31 +30 +35 +31 +30 +47 +40 +38 +194 +173 +157 +255 +215 +190 +238 +205 +179 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +129 +106 +52 +48 +58 +59 +176 +156 +141 +255 +215 +190 +255 +215 +190 +253 +212 +188 +255 +215 +190 +255 +215 +190 +255 +215 +190 +120 +114 +108 +56 +64 +60 +152 +119 +47 +161 +127 +40 +158 +125 +46 +168 +127 +42 +137 +110 +49 +51 +62 +63 +48 +58 +59 +75 +74 +61 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +63 +74 +74 +194 +173 +157 +207 +178 +158 +207 +178 +158 +207 +178 +158 +207 +178 +158 +207 +178 +158 +207 +178 +158 +172 +150 +134 +48 +58 +59 +111 +94 +57 +171 +129 +45 +158 +125 +46 +168 +127 +42 +152 +119 +47 +56 +64 +60 +51 +62 +63 +56 +64 +60 +152 +119 +47 +168 +127 +42 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +146 +135 +124 +255 +215 +190 +255 +215 +190 +253 +212 +188 +253 +212 +188 +255 +215 +190 +255 +215 +190 +146 +135 +124 +51 +62 +63 +145 +114 +49 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +88 +82 +59 +70 +79 +77 +63 +74 +74 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +171 +129 +45 +95 +87 +59 +55 +66 +67 +227 +196 +175 +255 +215 +190 +255 +215 +190 +253 +212 +188 +255 +215 +190 +255 +215 +190 +234 +204 +183 +70 +79 +77 +88 +82 +59 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +56 +64 +60 +137 +127 +115 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +137 +127 +115 +97 +98 +96 +83 +78 +61 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +69 +69 +61 +84 +85 +82 +207 +178 +158 +207 +178 +158 +207 +178 +158 +207 +178 +158 +207 +178 +158 +207 +178 +158 +217 +187 +166 +146 +135 +124 +48 +58 +59 +129 +106 +52 +168 +127 +42 +158 +125 +46 +168 +127 +42 +129 +106 +52 +51 +62 +63 +187 +166 +150 +176 +156 +141 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +89 +75 +66 +70 +79 +77 +245 +212 +186 +255 +215 +190 +255 +215 +190 +253 +212 +188 +255 +215 +190 +255 +215 +190 +217 +187 +166 +43 +57 +62 +125 +90 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +234 +126 +45 +106 +82 +65 +77 +85 +81 +133 +120 +107 +62 +63 +61 +209 +117 +53 +227 +126 +50 +224 +123 +55 +227 +126 +50 +183 +110 +59 +48 +58 +59 +161 +144 +134 +255 +215 +190 +255 +215 +190 +253 +212 +188 +253 +212 +188 +255 +215 +190 +255 +215 +190 +146 +135 +124 +48 +58 +59 +188 +112 +56 +227 +126 +50 +224 +123 +55 +227 +126 +50 +199 +115 +54 +62 +63 +61 +133 +120 +107 +77 +85 +81 +118 +86 +65 +234 +126 +45 +224 +123 +55 +224 +123 +55 +234 +126 +45 +125 +90 +64 +55 +66 +67 +227 +196 +175 +255 +215 +190 +255 +215 +190 +253 +212 +188 +255 +215 +190 +255 +215 +190 +234 +204 +183 +63 +74 +74 +106 +82 +65 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +97 +98 +96 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +227 +126 +50 +224 +123 +55 +89 +75 +66 +63 +74 +74 +217 +187 +166 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +91 +92 +89 +95 +78 +64 +227 +126 +50 +227 +126 +50 +224 +123 +55 +234 +126 +45 +146 +97 +64 +43 +57 +62 +187 +166 +150 +255 +215 +190 +255 +215 +190 +253 +212 +188 +255 +215 +190 +255 +215 +190 +255 +215 +190 +101 +100 +92 +76 +70 +64 +224 +123 +55 +227 +126 +50 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +251 +192 +154 +251 +168 +115 +247 +150 +84 +250 +139 +73 +250 +139 +73 +247 +143 +74 +249 +159 +103 +250 +176 +132 +154 +133 +118 +51 +62 +63 +183 +110 +59 +227 +126 +50 +224 +123 +55 +227 +126 +50 +199 +115 +54 +62 +63 +61 +133 +120 +107 +255 +215 +190 +255 +215 +190 +253 +212 +188 +253 +212 +188 +255 +215 +190 +255 +215 +190 +176 +156 +141 +43 +57 +62 +163 +104 +61 +234 +125 +52 +224 +123 +55 +227 +126 +50 +214 +121 +50 +76 +70 +64 +91 +92 +89 +70 +79 +77 +135 +94 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +234 +125 +52 +146 +97 +64 +35 +56 +60 +161 +144 +134 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +194 +173 +157 +48 +58 +59 +163 +104 +61 +234 +126 +45 +224 +123 +55 +227 +126 +50 +214 +121 +50 +76 +70 +64 +97 +98 +96 +255 +215 +190 +255 +215 +190 +255 +215 +190 +253 +212 +188 +255 +215 +190 +255 +215 +190 +187 +166 +150 +43 +57 +62 +163 +104 +61 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +125 +52 +139 +96 +61 +55 +66 +67 +250 +200 +166 +249 +174 +124 +249 +152 +92 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +109 +10 +247 +111 +26 +247 +123 +41 +248 +138 +64 +249 +159 +103 +248 +180 +134 +124 +111 +99 +35 +31 +30 +137 +110 +49 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +59 +50 +39 +85 +71 +43 +216 +194 +154 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +207 +202 +200 +47 +40 +38 +24 +22 +23 +35 +31 +30 +35 +31 +30 +35 +31 +30 +35 +31 +30 +24 +22 +23 +65 +58 +56 +238 +205 +179 +255 +215 +190 +238 +205 +179 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +100 +89 +56 +63 +74 +74 +227 +196 +175 +255 +215 +190 +253 +204 +176 +250 +200 +166 +250 +200 +166 +251 +209 +178 +255 +215 +190 +194 +173 +157 +48 +58 +59 +123 +102 +54 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +43 +57 +62 +95 +87 +59 +168 +127 +42 +158 +125 +46 +161 +127 +40 +158 +125 +46 +63 +69 +60 +43 +57 +62 +51 +62 +63 +51 +62 +63 +51 +62 +63 +51 +62 +63 +51 +62 +63 +51 +62 +63 +51 +62 +63 +51 +62 +63 +43 +57 +62 +88 +82 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +75 +74 +61 +43 +57 +62 +75 +74 +61 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +117 +98 +55 +51 +62 +63 +217 +187 +166 +255 +215 +190 +253 +204 +176 +250 +200 +166 +250 +200 +166 +253 +204 +176 +255 +215 +190 +217 +187 +166 +48 +58 +59 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +88 +82 +59 +48 +58 +59 +48 +58 +59 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +69 +69 +61 +109 +106 +99 +255 +215 +190 +253 +212 +188 +253 +204 +176 +250 +200 +166 +250 +200 +166 +253 +212 +188 +255 +215 +190 +120 +114 +108 +63 +69 +60 +158 +125 +46 +161 +127 +40 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +137 +127 +115 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +120 +114 +108 +70 +79 +77 +105 +93 +60 +171 +129 +45 +158 +125 +46 +168 +127 +42 +152 +119 +47 +56 +64 +60 +51 +62 +63 +51 +62 +63 +51 +62 +63 +51 +62 +63 +51 +62 +63 +51 +62 +63 +51 +62 +63 +51 +62 +63 +51 +62 +63 +43 +57 +62 +111 +94 +57 +171 +129 +45 +158 +125 +46 +161 +127 +40 +152 +119 +47 +62 +63 +61 +146 +135 +124 +172 +150 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +227 +126 +50 +199 +115 +54 +62 +63 +61 +146 +135 +124 +255 +215 +190 +253 +212 +188 +250 +200 +166 +250 +200 +166 +253 +204 +176 +253 +212 +188 +253 +212 +188 +97 +98 +96 +89 +75 +66 +227 +126 +50 +227 +126 +50 +224 +123 +55 +234 +126 +45 +139 +96 +61 +51 +62 +63 +63 +74 +74 +89 +75 +66 +227 +126 +50 +227 +126 +50 +224 +123 +55 +234 +125 +52 +135 +94 +64 +55 +66 +67 +217 +187 +166 +255 +215 +190 +253 +204 +176 +250 +200 +166 +250 +200 +166 +253 +204 +176 +255 +215 +190 +217 +187 +166 +51 +62 +63 +139 +96 +61 +234 +126 +45 +224 +123 +55 +227 +126 +50 +225 +124 +48 +81 +73 +62 +58 +69 +70 +51 +62 +63 +146 +97 +64 +234 +126 +45 +224 +123 +55 +227 +126 +50 +224 +123 +55 +81 +73 +62 +109 +106 +99 +255 +215 +190 +253 +212 +188 +253 +204 +176 +250 +200 +166 +250 +200 +166 +253 +212 +188 +255 +215 +190 +120 +114 +108 +69 +69 +61 +212 +120 +56 +227 +126 +50 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +101 +100 +92 +56 +64 +60 +188 +112 +56 +234 +125 +52 +224 +123 +55 +227 +126 +50 +194 +112 +58 +51 +62 +63 +146 +135 +124 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +234 +204 +183 +70 +79 +77 +118 +86 +65 +234 +125 +52 +224 +123 +55 +227 +126 +50 +227 +126 +50 +106 +82 +65 +77 +85 +81 +245 +212 +186 +255 +215 +190 +253 +204 +176 +250 +200 +166 +250 +200 +166 +251 +209 +178 +255 +215 +190 +176 +156 +141 +56 +64 +60 +188 +112 +56 +234 +125 +52 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +251 +192 +154 +251 +168 +115 +249 +152 +92 +247 +143 +74 +247 +143 +74 +247 +150 +84 +249 +159 +103 +248 +180 +134 +120 +114 +108 +69 +69 +61 +212 +120 +56 +227 +126 +50 +224 +123 +55 +234 +125 +52 +155 +100 +63 +43 +57 +62 +194 +173 +157 +255 +215 +190 +253 +204 +176 +250 +200 +166 +250 +200 +166 +253 +204 +176 +255 +215 +190 +234 +204 +183 +63 +74 +74 +112 +85 +63 +234 +125 +52 +227 +126 +50 +224 +123 +55 +234 +125 +52 +106 +82 +65 +58 +69 +70 +55 +66 +67 +135 +94 +64 +234 +125 +52 +224 +123 +55 +227 +126 +50 +227 +126 +50 +95 +78 +64 +77 +85 +81 +245 +212 +186 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +161 +144 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +227 +126 +50 +183 +110 +59 +48 +58 +59 +172 +150 +134 +255 +215 +190 +251 +209 +178 +250 +200 +166 +250 +200 +166 +253 +204 +176 +255 +215 +190 +245 +212 +186 +63 +74 +74 +112 +85 +63 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +126 +45 +139 +96 +61 +55 +66 +67 +250 +200 +166 +249 +174 +124 +249 +152 +92 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +250 +139 +73 +249 +159 +103 +252 +185 +144 +82 +69 +65 +47 +40 +38 +158 +125 +46 +161 +127 +40 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +85 +71 +43 +59 +50 +39 +216 +194 +154 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +164 +158 +157 +47 +40 +38 +24 +22 +23 +24 +22 +23 +24 +22 +23 +35 +31 +30 +65 +67 +64 +65 +58 +56 +227 +196 +175 +255 +215 +190 +238 +205 +179 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +88 +82 +59 +84 +85 +82 +255 +215 +190 +251 +209 +178 +250 +197 +158 +251 +192 +154 +251 +192 +154 +250 +200 +166 +253 +212 +188 +227 +196 +175 +58 +69 +70 +105 +93 +60 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +75 +74 +61 +41 +58 +57 +111 +94 +57 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +123 +102 +54 +123 +102 +54 +123 +102 +54 +123 +102 +54 +123 +102 +54 +123 +102 +54 +123 +102 +54 +123 +102 +54 +123 +102 +54 +123 +102 +54 +123 +102 +54 +137 +110 +49 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +41 +58 +57 +83 +78 +61 +168 +127 +42 +158 +125 +46 +158 +125 +46 +171 +129 +45 +95 +87 +59 +70 +79 +77 +245 +212 +186 +253 +212 +188 +250 +200 +166 +251 +192 +154 +251 +192 +154 +250 +200 +166 +253 +212 +188 +238 +205 +179 +70 +79 +77 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +88 +82 +59 +48 +58 +59 +48 +58 +59 +129 +106 +52 +168 +127 +42 +158 +125 +46 +168 +127 +42 +152 +119 +47 +56 +64 +60 +146 +135 +124 +255 +215 +190 +253 +204 +176 +250 +197 +158 +251 +192 +154 +251 +192 +154 +253 +204 +176 +255 +215 +190 +172 +150 +134 +51 +62 +63 +145 +114 +49 +168 +127 +42 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +137 +127 +115 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +97 +98 +96 +55 +66 +67 +123 +102 +54 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +123 +102 +54 +123 +102 +54 +123 +102 +54 +123 +102 +54 +123 +102 +54 +123 +102 +54 +123 +102 +54 +123 +102 +54 +123 +102 +54 +123 +102 +54 +117 +98 +55 +145 +114 +49 +161 +127 +40 +158 +125 +46 +158 +125 +46 +158 +125 +46 +69 +69 +61 +137 +127 +115 +172 +150 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +234 +125 +52 +183 +110 +59 +51 +62 +63 +187 +166 +150 +255 +215 +190 +253 +204 +176 +251 +192 +154 +251 +192 +154 +250 +197 +158 +253 +204 +176 +255 +215 +190 +137 +127 +115 +65 +67 +64 +209 +117 +53 +227 +126 +50 +224 +123 +55 +234 +125 +52 +163 +104 +61 +43 +57 +62 +41 +58 +57 +106 +82 +65 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +125 +52 +106 +82 +65 +77 +85 +81 +245 +212 +186 +251 +209 +178 +250 +197 +158 +249 +189 +146 +251 +192 +154 +250 +197 +158 +251 +209 +178 +238 +205 +179 +77 +85 +81 +112 +85 +63 +234 +126 +45 +224 +123 +55 +224 +123 +55 +227 +126 +50 +106 +82 +65 +41 +58 +57 +48 +58 +59 +163 +104 +61 +234 +125 +52 +224 +123 +55 +227 +126 +50 +209 +117 +53 +62 +63 +61 +146 +135 +124 +255 +215 +190 +253 +204 +176 +250 +197 +158 +251 +192 +154 +251 +192 +154 +253 +204 +176 +255 +215 +190 +176 +156 +141 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +101 +100 +92 +56 +64 +60 +188 +112 +56 +234 +125 +52 +224 +123 +55 +227 +126 +50 +183 +110 +59 +48 +58 +59 +176 +156 +141 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +227 +196 +175 +58 +69 +70 +139 +96 +61 +234 +125 +52 +224 +123 +55 +227 +126 +50 +214 +121 +50 +76 +70 +64 +120 +114 +108 +255 +215 +190 +253 +204 +176 +250 +197 +158 +251 +192 +154 +251 +192 +154 +250 +200 +166 +255 +215 +190 +207 +178 +158 +48 +58 +59 +163 +104 +61 +234 +125 +52 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +251 +192 +154 +249 +174 +124 +246 +156 +93 +247 +150 +84 +249 +146 +83 +249 +152 +92 +251 +168 +115 +249 +189 +146 +97 +98 +96 +89 +75 +66 +225 +124 +48 +227 +126 +50 +224 +123 +55 +234 +126 +45 +125 +90 +64 +58 +69 +70 +227 +196 +175 +253 +212 +188 +250 +200 +166 +251 +192 +154 +249 +189 +146 +250 +197 +158 +251 +209 +178 +255 +215 +190 +97 +98 +96 +89 +75 +66 +227 +126 +50 +227 +126 +50 +224 +123 +55 +234 +126 +45 +125 +90 +64 +43 +57 +62 +43 +57 +62 +135 +94 +64 +234 +125 +52 +224 +123 +55 +227 +126 +50 +227 +126 +50 +89 +75 +66 +101 +100 +92 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +137 +127 +115 +69 +69 +61 +212 +120 +56 +227 +126 +50 +224 +123 +55 +234 +126 +45 +155 +100 +63 +43 +57 +62 +207 +178 +158 +255 +215 +190 +250 +200 +166 +251 +192 +154 +251 +192 +154 +250 +197 +158 +251 +209 +178 +255 +215 +190 +109 +106 +99 +89 +75 +66 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +126 +45 +139 +96 +61 +55 +66 +67 +250 +200 +166 +249 +174 +124 +249 +152 +92 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +247 +143 +74 +249 +159 +103 +252 +185 +144 +55 +48 +48 +59 +50 +39 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +156 +125 +62 +101 +83 +47 +59 +50 +39 +209 +171 +139 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +219 +212 +208 +137 +127 +115 +101 +100 +92 +120 +114 +108 +186 +181 +179 +152 +147 +147 +55 +48 +48 +227 +196 +175 +255 +215 +190 +238 +205 +179 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +97 +98 +96 +255 +215 +190 +253 +204 +176 +251 +192 +154 +249 +189 +146 +249 +189 +146 +250 +197 +158 +251 +209 +178 +234 +204 +183 +70 +79 +77 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +161 +127 +40 +75 +74 +61 +41 +58 +57 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +168 +127 +42 +168 +127 +42 +168 +127 +42 +171 +129 +45 +75 +74 +61 +41 +58 +57 +88 +82 +59 +168 +127 +42 +158 +125 +46 +158 +125 +46 +171 +129 +45 +88 +82 +59 +77 +85 +81 +245 +212 +186 +251 +209 +178 +250 +197 +158 +249 +189 +146 +249 +189 +146 +250 +197 +158 +251 +209 +178 +245 +212 +186 +84 +85 +82 +88 +82 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +88 +82 +59 +43 +57 +62 +48 +58 +59 +129 +106 +52 +168 +127 +42 +158 +125 +46 +168 +127 +42 +145 +114 +49 +56 +64 +60 +161 +144 +134 +255 +215 +190 +250 +200 +166 +251 +192 +154 +249 +189 +146 +251 +192 +154 +250 +200 +166 +255 +215 +190 +187 +166 +150 +51 +62 +63 +137 +110 +49 +168 +127 +42 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +137 +127 +115 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +65 +67 +64 +91 +92 +89 +55 +66 +67 +129 +106 +52 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +171 +129 +45 +168 +127 +42 +168 +127 +42 +168 +127 +42 +158 +125 +46 +63 +69 +60 +137 +127 +115 +172 +150 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +227 +126 +50 +173 +106 +60 +48 +58 +59 +187 +166 +150 +255 +215 +190 +250 +200 +166 +251 +192 +154 +249 +189 +146 +251 +192 +154 +250 +200 +166 +255 +215 +190 +161 +144 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +234 +125 +52 +173 +106 +60 +48 +58 +59 +41 +58 +57 +118 +86 +65 +234 +126 +45 +224 +123 +55 +224 +123 +55 +234 +125 +52 +95 +78 +64 +91 +92 +89 +255 +215 +190 +253 +204 +176 +251 +192 +154 +252 +185 +144 +252 +185 +144 +251 +192 +154 +253 +204 +176 +245 +212 +186 +91 +92 +89 +106 +82 +65 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +125 +52 +112 +85 +63 +41 +58 +57 +48 +58 +59 +173 +106 +60 +234 +125 +52 +224 +123 +55 +227 +126 +50 +199 +115 +54 +56 +64 +60 +161 +144 +134 +255 +215 +190 +250 +200 +166 +251 +192 +154 +249 +189 +146 +251 +192 +154 +250 +200 +166 +255 +215 +190 +187 +166 +150 +48 +58 +59 +183 +110 +59 +234 +125 +52 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +101 +100 +92 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +227 +126 +50 +183 +110 +59 +51 +62 +63 +176 +156 +141 +255 +215 +190 +253 +212 +188 +251 +209 +178 +253 +212 +188 +217 +187 +166 +55 +66 +67 +146 +97 +64 +234 +126 +45 +224 +123 +55 +227 +126 +50 +214 +121 +50 +69 +69 +61 +137 +127 +115 +255 +215 +190 +253 +204 +176 +251 +192 +154 +249 +189 +146 +249 +189 +146 +250 +200 +166 +253 +212 +188 +217 +187 +166 +51 +62 +63 +155 +100 +63 +234 +125 +52 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +250 +197 +158 +249 +174 +124 +249 +159 +103 +249 +152 +92 +249 +152 +92 +249 +159 +103 +249 +174 +124 +250 +197 +158 +91 +92 +89 +95 +78 +64 +227 +126 +50 +227 +126 +50 +224 +123 +55 +234 +125 +52 +125 +90 +64 +70 +79 +77 +234 +204 +183 +251 +209 +178 +250 +197 +158 +249 +189 +146 +252 +185 +144 +251 +192 +154 +253 +204 +176 +255 +215 +190 +120 +114 +108 +81 +73 +62 +224 +123 +55 +227 +126 +50 +224 +123 +55 +234 +126 +45 +135 +94 +64 +41 +58 +57 +41 +58 +57 +135 +94 +64 +234 +125 +52 +224 +123 +55 +227 +126 +50 +227 +126 +50 +89 +75 +66 +101 +100 +92 +253 +212 +188 +253 +212 +188 +251 +209 +178 +251 +209 +178 +255 +215 +190 +137 +127 +115 +76 +70 +64 +214 +121 +50 +227 +126 +50 +224 +123 +55 +234 +125 +52 +146 +97 +64 +51 +62 +63 +227 +196 +175 +253 +212 +188 +250 +197 +158 +249 +189 +146 +249 +189 +146 +251 +192 +154 +253 +204 +176 +255 +215 +190 +120 +114 +108 +81 +73 +62 +227 +126 +50 +227 +126 +50 +224 +123 +55 +234 +126 +45 +139 +96 +61 +51 +62 +63 +250 +200 +166 +249 +174 +124 +249 +152 +92 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +250 +139 +73 +249 +159 +103 +252 +185 +144 +55 +48 +48 +59 +50 +39 +161 +127 +40 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +154 +125 +71 +170 +137 +67 +108 +87 +46 +59 +50 +39 +192 +155 +91 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +186 +181 +179 +47 +40 +38 +65 +58 +56 +245 +212 +186 +255 +215 +190 +238 +205 +179 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +88 +82 +59 +84 +85 +82 +253 +212 +188 +251 +209 +178 +250 +197 +158 +251 +192 +154 +251 +192 +154 +250 +200 +166 +253 +212 +188 +234 +204 +183 +63 +74 +74 +100 +89 +56 +171 +129 +45 +158 +125 +46 +158 +125 +46 +161 +127 +40 +75 +74 +61 +41 +58 +57 +111 +94 +57 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +111 +94 +57 +56 +64 +60 +43 +57 +62 +83 +78 +61 +168 +127 +42 +158 +125 +46 +158 +125 +46 +171 +129 +45 +95 +87 +59 +70 +79 +77 +245 +212 +186 +251 +209 +178 +250 +197 +158 +251 +192 +154 +251 +192 +154 +250 +197 +158 +251 +209 +178 +245 +212 +186 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +88 +82 +59 +43 +57 +62 +48 +58 +59 +129 +106 +52 +168 +127 +42 +158 +125 +46 +158 +125 +46 +152 +119 +47 +56 +64 +60 +161 +144 +134 +255 +215 +190 +253 +204 +176 +251 +192 +154 +249 +189 +146 +251 +192 +154 +250 +200 +166 +255 +215 +190 +176 +156 +141 +51 +62 +63 +137 +110 +49 +168 +127 +42 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +137 +127 +115 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +91 +92 +89 +55 +66 +67 +123 +102 +54 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +145 +114 +49 +100 +89 +56 +48 +58 +59 +187 +166 +150 +176 +156 +141 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +227 +126 +50 +183 +110 +59 +51 +62 +63 +176 +156 +141 +255 +215 +190 +250 +200 +166 +251 +192 +154 +251 +192 +154 +250 +197 +158 +253 +204 +176 +255 +215 +190 +146 +135 +124 +62 +63 +61 +209 +117 +53 +227 +126 +50 +224 +123 +55 +234 +125 +52 +163 +104 +61 +48 +58 +59 +41 +58 +57 +112 +85 +63 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +125 +52 +106 +82 +65 +84 +85 +82 +255 +215 +190 +251 +209 +178 +250 +197 +158 +249 +189 +146 +249 +189 +146 +250 +197 +158 +251 +209 +178 +238 +205 +179 +84 +85 +82 +106 +82 +65 +234 +125 +52 +224 +123 +55 +227 +126 +50 +227 +126 +50 +106 +82 +65 +41 +58 +57 +48 +58 +59 +173 +106 +60 +227 +126 +50 +224 +123 +55 +227 +126 +50 +199 +115 +54 +62 +63 +61 +146 +135 +124 +255 +215 +190 +253 +204 +176 +251 +192 +154 +249 +189 +146 +251 +192 +154 +250 +200 +166 +255 +215 +190 +176 +156 +141 +51 +62 +63 +183 +110 +59 +227 +126 +50 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +101 +100 +92 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +227 +126 +50 +183 +110 +59 +51 +62 +63 +176 +156 +141 +253 +212 +188 +253 +204 +176 +250 +200 +166 +253 +204 +176 +217 +187 +166 +55 +66 +67 +146 +97 +64 +234 +125 +52 +224 +123 +55 +227 +126 +50 +214 +121 +50 +76 +70 +64 +120 +114 +108 +255 +215 +190 +253 +204 +176 +250 +197 +158 +251 +192 +154 +251 +192 +154 +250 +200 +166 +253 +212 +188 +207 +178 +158 +48 +58 +59 +163 +104 +61 +227 +126 +50 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +250 +200 +166 +248 +180 +134 +251 +168 +115 +247 +165 +111 +247 +165 +111 +251 +168 +115 +248 +180 +134 +250 +200 +166 +91 +92 +89 +89 +75 +66 +225 +124 +48 +227 +126 +50 +224 +123 +55 +234 +126 +45 +125 +90 +64 +63 +74 +74 +227 +196 +175 +251 +209 +178 +250 +197 +158 +249 +189 +146 +249 +189 +146 +250 +197 +158 +253 +204 +176 +255 +215 +190 +109 +106 +99 +89 +75 +66 +225 +124 +48 +227 +126 +50 +224 +123 +55 +234 +125 +52 +125 +90 +64 +43 +57 +62 +41 +58 +57 +135 +94 +64 +234 +126 +45 +224 +123 +55 +227 +126 +50 +227 +126 +50 +89 +75 +66 +101 +100 +92 +253 +212 +188 +253 +204 +176 +250 +200 +166 +250 +200 +166 +251 +209 +178 +137 +127 +115 +76 +70 +64 +214 +121 +50 +227 +126 +50 +224 +123 +55 +234 +125 +52 +155 +100 +63 +43 +57 +62 +217 +187 +166 +253 +212 +188 +250 +200 +166 +251 +192 +154 +249 +189 +146 +250 +197 +158 +253 +204 +176 +255 +215 +190 +120 +114 +108 +81 +73 +62 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +125 +52 +139 +96 +61 +55 +66 +67 +250 +200 +166 +249 +174 +124 +249 +152 +92 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +250 +139 +73 +249 +159 +103 +248 +180 +134 +76 +70 +64 +47 +40 +38 +152 +119 +47 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +156 +125 +62 +154 +125 +71 +170 +137 +67 +101 +83 +47 +59 +50 +39 +170 +137 +67 +255 +238 +227 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +152 +147 +147 +35 +31 +30 +24 +22 +23 +115 +102 +92 +255 +215 +190 +255 +215 +190 +238 +205 +179 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +171 +129 +45 +105 +93 +60 +58 +69 +70 +227 +196 +175 +255 +215 +190 +253 +204 +176 +250 +200 +166 +250 +200 +166 +253 +204 +176 +255 +215 +190 +207 +178 +158 +48 +58 +59 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +69 +69 +61 +43 +57 +62 +100 +89 +56 +171 +129 +45 +158 +125 +46 +161 +127 +40 +158 +125 +46 +75 +74 +61 +48 +58 +59 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +48 +58 +59 +101 +100 +92 +91 +92 +89 +75 +74 +61 +168 +127 +42 +158 +125 +46 +158 +125 +46 +171 +129 +45 +111 +94 +57 +55 +66 +67 +227 +196 +175 +255 +215 +190 +253 +204 +176 +250 +200 +166 +250 +200 +166 +253 +204 +176 +255 +215 +190 +227 +196 +175 +51 +62 +63 +105 +93 +60 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +48 +58 +59 +48 +58 +59 +123 +102 +54 +168 +127 +42 +158 +125 +46 +161 +127 +40 +158 +125 +46 +69 +69 +61 +120 +114 +108 +255 +215 +190 +251 +209 +178 +250 +200 +166 +250 +197 +158 +250 +200 +166 +251 +209 +178 +255 +215 +190 +146 +135 +124 +56 +64 +60 +152 +119 +47 +168 +127 +42 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +137 +127 +115 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +109 +106 +99 +63 +74 +74 +111 +94 +57 +171 +129 +45 +158 +125 +46 +161 +127 +40 +152 +119 +47 +69 +69 +61 +51 +62 +63 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +56 +64 +60 +51 +62 +63 +48 +58 +59 +120 +114 +108 +245 +212 +186 +172 +150 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +227 +126 +50 +209 +117 +53 +62 +63 +61 +137 +127 +115 +255 +215 +190 +251 +209 +178 +250 +200 +166 +250 +200 +166 +250 +200 +166 +253 +212 +188 +255 +215 +190 +109 +106 +99 +81 +73 +62 +224 +123 +55 +227 +126 +50 +224 +123 +55 +234 +125 +52 +155 +100 +63 +48 +58 +59 +43 +57 +62 +95 +78 +64 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +125 +52 +125 +90 +64 +63 +74 +74 +227 +196 +175 +253 +212 +188 +250 +200 +166 +250 +197 +158 +250 +197 +158 +253 +204 +176 +255 +215 +190 +227 +196 +175 +55 +66 +67 +125 +90 +64 +234 +125 +52 +224 +123 +55 +224 +123 +55 +227 +126 +50 +89 +75 +66 +48 +58 +59 +48 +58 +59 +155 +100 +63 +234 +126 +45 +224 +123 +55 +227 +126 +50 +214 +121 +50 +76 +70 +64 +120 +114 +108 +255 +215 +190 +251 +209 +178 +250 +200 +166 +250 +197 +158 +250 +200 +166 +251 +209 +178 +255 +215 +190 +137 +127 +115 +62 +63 +61 +209 +117 +53 +227 +126 +50 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +97 +98 +96 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +227 +126 +50 +183 +110 +59 +48 +58 +59 +176 +156 +141 +251 +209 +178 +250 +200 +166 +250 +197 +158 +250 +200 +166 +227 +196 +175 +63 +74 +74 +135 +94 +64 +234 +126 +45 +224 +123 +55 +227 +126 +50 +227 +126 +50 +95 +78 +64 +91 +92 +89 +253 +212 +188 +253 +212 +188 +250 +200 +166 +250 +200 +166 +250 +200 +166 +251 +209 +178 +255 +215 +190 +172 +150 +134 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +251 +209 +178 +251 +192 +154 +250 +176 +132 +249 +174 +124 +249 +174 +124 +248 +180 +134 +251 +192 +154 +251 +209 +178 +109 +106 +99 +76 +70 +64 +214 +121 +50 +227 +126 +50 +224 +123 +55 +234 +126 +45 +146 +97 +64 +43 +57 +62 +217 +187 +166 +255 +215 +190 +253 +204 +176 +250 +197 +158 +250 +197 +158 +250 +200 +166 +253 +212 +188 +245 +212 +186 +70 +79 +77 +106 +82 +65 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +125 +52 +112 +85 +63 +51 +62 +63 +51 +62 +63 +135 +94 +64 +234 +126 +45 +224 +123 +55 +227 +126 +50 +227 +126 +50 +89 +75 +66 +101 +100 +92 +245 +212 +186 +250 +200 +166 +251 +192 +154 +250 +197 +158 +253 +204 +176 +146 +135 +124 +65 +67 +64 +209 +117 +53 +227 +126 +50 +224 +123 +55 +234 +125 +52 +173 +106 +60 +48 +58 +59 +187 +166 +150 +255 +215 +190 +253 +204 +176 +250 +200 +166 +250 +197 +158 +250 +200 +166 +253 +212 +188 +255 +215 +190 +84 +85 +82 +95 +78 +64 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +125 +52 +139 +96 +61 +55 +66 +67 +250 +200 +166 +249 +174 +124 +249 +152 +92 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +109 +10 +247 +111 +26 +247 +123 +41 +248 +138 +64 +249 +152 +92 +249 +174 +124 +121 +100 +85 +35 +31 +30 +108 +87 +46 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +156 +125 +62 +154 +125 +71 +154 +125 +71 +171 +129 +45 +85 +71 +43 +71 +60 +43 +171 +129 +45 +224 +207 +180 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +237 +233 +225 +174 +168 +167 +81 +77 +76 +24 +22 +23 +35 +31 +30 +35 +31 +30 +187 +166 +150 +255 +215 +190 +255 +215 +190 +234 +204 +183 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +129 +106 +52 +51 +62 +63 +176 +156 +141 +255 +215 +190 +255 +215 +190 +253 +212 +188 +253 +212 +188 +255 +215 +190 +255 +215 +190 +146 +135 +124 +51 +62 +63 +145 +114 +49 +168 +127 +42 +158 +125 +46 +158 +125 +46 +152 +119 +47 +56 +64 +60 +43 +57 +62 +83 +78 +61 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +88 +82 +59 +48 +58 +59 +146 +135 +124 +161 +144 +134 +161 +144 +134 +161 +144 +134 +161 +144 +134 +161 +144 +134 +161 +144 +134 +161 +144 +134 +161 +144 +134 +172 +150 +134 +172 +150 +134 +146 +135 +124 +146 +135 +124 +194 +173 +157 +245 +212 +186 +137 +127 +115 +63 +69 +60 +158 +125 +46 +161 +127 +40 +158 +125 +46 +168 +127 +42 +137 +110 +49 +51 +62 +63 +161 +144 +134 +255 +215 +190 +255 +215 +190 +253 +212 +188 +253 +212 +188 +255 +215 +190 +255 +215 +190 +161 +144 +134 +48 +58 +59 +137 +110 +49 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +55 +66 +67 +51 +62 +63 +105 +93 +60 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +88 +82 +59 +70 +79 +77 +245 +212 +186 +255 +215 +190 +253 +212 +188 +251 +209 +178 +253 +212 +188 +255 +215 +190 +255 +215 +190 +91 +92 +89 +75 +74 +61 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +137 +127 +115 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +133 +120 +107 +84 +85 +82 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +75 +74 +61 +55 +66 +67 +161 +144 +134 +161 +144 +134 +161 +144 +134 +161 +144 +134 +161 +144 +134 +161 +144 +134 +161 +144 +134 +161 +144 +134 +161 +144 +134 +172 +150 +134 +172 +150 +134 +137 +127 +115 +146 +135 +124 +207 +178 +158 +245 +212 +186 +255 +215 +190 +161 +144 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +227 +126 +50 +227 +126 +50 +89 +75 +66 +76 +78 +76 +245 +212 +186 +255 +215 +190 +253 +212 +188 +253 +212 +188 +253 +212 +188 +255 +215 +190 +227 +196 +175 +58 +69 +70 +118 +86 +65 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +125 +52 +125 +90 +64 +63 +74 +74 +97 +98 +96 +76 +70 +64 +214 +121 +50 +227 +126 +50 +224 +123 +55 +234 +125 +52 +163 +104 +61 +48 +58 +59 +187 +166 +150 +255 +215 +190 +255 +215 +190 +251 +209 +178 +251 +209 +178 +255 +215 +190 +255 +215 +190 +176 +156 +141 +48 +58 +59 +173 +106 +60 +227 +126 +50 +224 +123 +55 +227 +126 +50 +212 +120 +56 +69 +69 +61 +101 +100 +92 +63 +74 +74 +125 +90 +64 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +125 +52 +106 +82 +65 +63 +74 +74 +234 +204 +183 +255 +215 +190 +253 +212 +188 +253 +212 +188 +253 +212 +188 +255 +215 +190 +245 +212 +186 +70 +79 +77 +89 +75 +66 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +101 +100 +92 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +234 +125 +52 +183 +110 +59 +51 +62 +63 +176 +156 +141 +253 +204 +176 +251 +192 +154 +251 +192 +154 +251 +192 +154 +250 +200 +166 +77 +85 +81 +106 +82 +65 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +126 +45 +135 +94 +64 +51 +62 +63 +217 +187 +166 +255 +215 +190 +255 +215 +190 +253 +212 +188 +253 +212 +188 +255 +215 +190 +255 +215 +190 +109 +106 +99 +76 +70 +64 +224 +123 +55 +227 +126 +50 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +255 +215 +190 +250 +200 +166 +251 +192 +154 +252 +185 +144 +252 +185 +144 +251 +192 +154 +250 +200 +166 +255 +215 +190 +146 +135 +124 +56 +64 +60 +199 +115 +54 +227 +126 +50 +224 +123 +55 +227 +126 +50 +194 +112 +58 +51 +62 +63 +146 +135 +124 +255 +215 +190 +255 +215 +190 +251 +209 +178 +251 +209 +178 +253 +212 +188 +255 +215 +190 +194 +173 +157 +43 +57 +62 +146 +97 +64 +234 +126 +45 +224 +123 +55 +227 +126 +50 +227 +126 +50 +89 +75 +66 +77 +85 +81 +63 +74 +74 +135 +94 +64 +234 +125 +52 +224 +123 +55 +227 +126 +50 +227 +126 +50 +89 +75 +66 +101 +100 +92 +251 +209 +178 +250 +197 +158 +249 +189 +146 +249 +189 +146 +250 +200 +166 +172 +150 +134 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +120 +114 +108 +255 +215 +190 +255 +215 +190 +253 +212 +188 +251 +209 +178 +253 +212 +188 +255 +215 +190 +217 +187 +166 +51 +62 +63 +135 +94 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +234 +126 +45 +139 +96 +61 +55 +66 +67 +250 +200 +166 +249 +174 +124 +249 +152 +92 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +111 +26 +247 +118 +39 +247 +130 +60 +247 +150 +84 +251 +168 +115 +187 +140 +108 +24 +22 +23 +59 +50 +39 +168 +127 +42 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +156 +125 +62 +154 +125 +71 +154 +125 +71 +154 +125 +71 +156 +125 +62 +158 +125 +46 +47 +40 +38 +108 +87 +46 +158 +125 +46 +195 +167 +113 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +219 +212 +208 +164 +158 +157 +109 +106 +99 +65 +58 +56 +24 +22 +23 +24 +22 +23 +94 +60 +47 +178 +86 +46 +59 +50 +39 +150 +125 +114 +255 +215 +190 +255 +215 +190 +234 +204 +183 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +69 +69 +61 +84 +85 +82 +234 +204 +183 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +217 +187 +166 +55 +66 +67 +83 +78 +61 +168 +127 +42 +158 +125 +46 +158 +125 +46 +171 +129 +45 +123 +102 +54 +51 +62 +63 +76 +78 +76 +56 +64 +60 +152 +119 +47 +168 +127 +42 +158 +125 +46 +168 +127 +42 +129 +106 +52 +48 +58 +59 +161 +144 +134 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +217 +187 +166 +133 +120 +107 +77 +85 +81 +77 +85 +81 +146 +135 +124 +245 +212 +186 +176 +156 +141 +51 +62 +63 +137 +110 +49 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +75 +74 +61 +63 +74 +74 +227 +196 +175 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +234 +204 +183 +76 +78 +76 +75 +74 +61 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +88 +82 +59 +77 +85 +81 +77 +85 +81 +88 +82 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +129 +106 +52 +48 +58 +59 +146 +135 +124 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +172 +150 +134 +48 +58 +59 +117 +98 +55 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +137 +127 +115 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +146 +135 +124 +120 +114 +108 +69 +69 +61 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +111 +94 +57 +51 +62 +63 +176 +156 +141 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +194 +173 +157 +120 +114 +108 +70 +79 +77 +84 +85 +82 +161 +144 +134 +255 +215 +190 +255 +215 +190 +161 +144 +134 +56 +64 +60 +199 +115 +54 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +126 +45 +155 +100 +63 +41 +58 +57 +161 +144 +134 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +137 +127 +115 +48 +58 +59 +183 +110 +59 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +89 +75 +66 +97 +98 +96 +172 +150 +134 +48 +58 +59 +183 +110 +59 +227 +126 +50 +224 +123 +55 +227 +126 +50 +214 +121 +50 +76 +70 +64 +84 +85 +82 +234 +204 +183 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +234 +204 +183 +77 +85 +81 +81 +73 +62 +224 +123 +55 +227 +126 +50 +224 +123 +55 +234 +125 +52 +173 +106 +60 +48 +58 +59 +176 +156 +141 +97 +98 +96 +95 +78 +64 +227 +126 +50 +227 +126 +50 +224 +123 +55 +234 +125 +52 +173 +106 +60 +48 +58 +59 +146 +135 +124 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +161 +144 +134 +41 +58 +57 +155 +100 +63 +234 +126 +45 +224 +123 +55 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +101 +100 +92 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +227 +126 +50 +183 +110 +59 +51 +62 +63 +176 +156 +141 +250 +200 +166 +249 +189 +146 +252 +185 +144 +249 +189 +146 +250 +200 +166 +120 +114 +108 +69 +69 +61 +214 +121 +50 +227 +126 +50 +224 +123 +55 +227 +126 +50 +199 +115 +54 +62 +63 +61 +101 +100 +92 +245 +212 +186 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +187 +166 +150 +43 +57 +62 +135 +94 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +255 +215 +190 +253 +212 +188 +253 +204 +176 +250 +200 +166 +250 +200 +166 +253 +204 +176 +253 +212 +188 +255 +215 +190 +187 +166 +150 +41 +58 +57 +155 +100 +63 +234 +125 +52 +224 +123 +55 +227 +126 +50 +227 +126 +50 +95 +78 +64 +58 +69 +70 +227 +196 +175 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +245 +212 +186 +91 +92 +89 +62 +63 +61 +209 +117 +53 +227 +126 +50 +224 +123 +55 +227 +126 +50 +199 +115 +54 +62 +63 +61 +133 +120 +107 +77 +85 +81 +135 +94 +64 +234 +126 +45 +224 +123 +55 +227 +126 +50 +227 +126 +50 +89 +75 +66 +101 +100 +92 +253 +204 +176 +251 +192 +154 +252 +185 +144 +252 +185 +144 +251 +192 +154 +212 +173 +150 +48 +58 +59 +155 +100 +63 +234 +126 +45 +224 +123 +55 +224 +123 +55 +234 +125 +52 +118 +86 +65 +51 +62 +63 +207 +178 +158 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +109 +106 +99 +56 +64 +60 +199 +115 +54 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +125 +52 +139 +96 +61 +55 +66 +67 +250 +200 +166 +249 +174 +124 +249 +152 +92 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +247 +111 +26 +246 +116 +28 +247 +130 +53 +247 +143 +74 +249 +159 +103 +248 +180 +134 +89 +75 +66 +24 +22 +23 +85 +71 +43 +171 +129 +45 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +156 +125 +62 +154 +125 +71 +154 +125 +71 +154 +125 +71 +156 +125 +62 +175 +132 +40 +85 +71 +43 +47 +40 +38 +158 +125 +46 +158 +125 +46 +170 +137 +67 +237 +233 +225 +253 +255 +252 +253 +255 +252 +253 +255 +252 +207 +202 +200 +164 +158 +157 +146 +135 +124 +120 +114 +108 +89 +84 +82 +65 +58 +56 +47 +40 +38 +24 +22 +23 +24 +22 +23 +35 +31 +30 +94 +60 +47 +178 +86 +46 +226 +110 +35 +241 +100 +24 +144 +77 +47 +65 +58 +56 +253 +212 +188 +255 +215 +190 +238 +205 +179 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +129 +106 +52 +48 +58 +59 +101 +100 +92 +217 +187 +166 +245 +212 +186 +245 +212 +186 +194 +173 +157 +76 +78 +76 +56 +64 +60 +145 +114 +49 +168 +127 +42 +158 +125 +46 +158 +125 +46 +171 +129 +45 +88 +82 +59 +77 +85 +81 +176 +156 +141 +48 +58 +59 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +95 +87 +59 +41 +58 +57 +137 +127 +115 +227 +196 +175 +255 +215 +190 +255 +215 +190 +255 +215 +190 +245 +212 +186 +207 +178 +158 +120 +114 +108 +48 +58 +59 +62 +63 +61 +100 +89 +56 +95 +87 +59 +51 +62 +63 +120 +114 +108 +227 +196 +175 +55 +66 +67 +100 +89 +56 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +137 +110 +49 +51 +62 +63 +84 +85 +82 +207 +178 +158 +245 +212 +186 +245 +212 +186 +207 +178 +158 +97 +98 +96 +51 +62 +63 +137 +110 +49 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +88 +82 +59 +91 +92 +89 +120 +114 +108 +63 +69 +60 +158 +125 +46 +161 +127 +40 +158 +125 +46 +158 +125 +46 +168 +127 +42 +88 +82 +59 +43 +57 +62 +161 +144 +134 +227 +196 +175 +253 +212 +188 +234 +204 +183 +161 +144 +134 +51 +62 +63 +75 +74 +61 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +137 +127 +115 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +146 +135 +124 +176 +156 +141 +48 +58 +59 +137 +110 +49 +171 +129 +45 +158 +125 +46 +161 +127 +40 +158 +125 +46 +75 +74 +61 +43 +57 +62 +161 +144 +134 +234 +204 +183 +255 +215 +190 +255 +215 +190 +255 +215 +190 +245 +212 +186 +194 +173 +157 +109 +106 +99 +43 +57 +62 +69 +69 +61 +105 +93 +60 +88 +82 +59 +48 +58 +59 +146 +135 +124 +255 +215 +190 +161 +144 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +225 +124 +48 +95 +78 +64 +43 +57 +62 +161 +144 +134 +234 +204 +183 +245 +212 +186 +227 +196 +175 +146 +135 +124 +35 +56 +60 +125 +90 +64 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +125 +52 +188 +112 +56 +51 +62 +63 +161 +144 +134 +234 +204 +183 +51 +62 +63 +125 +90 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +234 +125 +52 +163 +104 +61 +43 +57 +62 +97 +98 +96 +207 +178 +158 +245 +212 +186 +245 +212 +186 +207 +178 +158 +91 +92 +89 +48 +58 +59 +173 +106 +60 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +126 +45 +118 +86 +65 +55 +66 +67 +234 +204 +183 +146 +135 +124 +56 +64 +60 +194 +112 +58 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +125 +52 +112 +85 +63 +35 +56 +60 +146 +135 +124 +227 +196 +175 +253 +212 +188 +234 +204 +183 +161 +144 +134 +43 +57 +62 +95 +78 +64 +225 +124 +48 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +101 +100 +92 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +227 +126 +50 +183 +110 +59 +51 +62 +63 +176 +156 +141 +250 +197 +158 +252 +185 +144 +248 +180 +134 +248 +180 +134 +251 +192 +154 +172 +150 +134 +48 +58 +59 +173 +106 +60 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +126 +45 +139 +96 +61 +41 +58 +57 +120 +114 +108 +217 +187 +166 +245 +212 +186 +234 +204 +183 +176 +156 +141 +58 +69 +70 +81 +73 +62 +214 +121 +50 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +255 +215 +190 +255 +215 +190 +217 +187 +166 +133 +120 +107 +84 +85 +82 +91 +92 +89 +146 +135 +124 +234 +204 +183 +238 +205 +179 +63 +74 +74 +95 +78 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +84 +85 +82 +194 +173 +157 +245 +212 +186 +245 +212 +186 +217 +187 +166 +109 +106 +99 +41 +58 +57 +146 +97 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +234 +126 +45 +146 +97 +64 +51 +62 +63 +187 +166 +150 +76 +78 +76 +135 +94 +64 +234 +126 +45 +224 +123 +55 +227 +126 +50 +227 +126 +50 +89 +75 +66 +97 +98 +96 +250 +200 +166 +249 +189 +146 +248 +180 +134 +248 +180 +134 +252 +185 +144 +232 +190 +161 +70 +79 +77 +112 +85 +63 +234 +126 +45 +224 +123 +55 +224 +123 +55 +227 +126 +50 +199 +115 +54 +65 +67 +64 +70 +79 +77 +187 +166 +150 +238 +205 +179 +245 +212 +186 +217 +187 +166 +133 +120 +107 +35 +56 +60 +135 +94 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +224 +123 +55 +234 +126 +45 +139 +96 +61 +55 +66 +67 +250 +200 +166 +249 +174 +124 +249 +152 +92 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +123 +41 +247 +130 +60 +247 +150 +84 +251 +168 +115 +203 +161 +131 +55 +48 +48 +24 +22 +23 +71 +60 +43 +145 +114 +49 +171 +129 +45 +171 +129 +45 +158 +125 +46 +156 +125 +62 +154 +125 +71 +154 +125 +71 +156 +125 +62 +156 +125 +62 +171 +129 +45 +171 +129 +45 +101 +83 +47 +35 +31 +30 +123 +102 +54 +171 +129 +45 +158 +125 +46 +160 +120 +43 +224 +207 +180 +253 +255 +252 +253 +255 +252 +219 +212 +208 +47 +40 +38 +24 +22 +23 +24 +22 +23 +24 +22 +23 +24 +22 +23 +24 +22 +23 +35 +31 +30 +35 +31 +30 +24 +22 +23 +47 +40 +38 +226 +110 +35 +241 +100 +24 +226 +110 +35 +226 +110 +35 +144 +77 +47 +55 +48 +48 +238 +205 +179 +255 +215 +190 +238 +205 +179 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +123 +102 +54 +56 +64 +60 +51 +62 +63 +84 +85 +82 +84 +85 +82 +48 +58 +59 +63 +69 +60 +129 +106 +52 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +56 +64 +60 +137 +127 +115 +245 +212 +186 +84 +85 +82 +69 +69 +61 +158 +125 +46 +158 +125 +46 +158 +125 +46 +161 +127 +40 +158 +125 +46 +95 +87 +59 +48 +58 +59 +63 +74 +74 +109 +106 +99 +133 +120 +107 +133 +120 +107 +91 +92 +89 +51 +62 +63 +56 +64 +60 +100 +89 +56 +152 +119 +47 +171 +129 +45 +175 +132 +40 +100 +89 +56 +48 +58 +59 +217 +187 +166 +120 +114 +108 +63 +69 +60 +152 +119 +47 +161 +127 +40 +158 +125 +46 +158 +125 +46 +168 +127 +42 +129 +106 +52 +61 +67 +58 +51 +62 +63 +84 +85 +82 +84 +85 +82 +51 +62 +63 +56 +64 +60 +123 +102 +54 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +97 +98 +96 +187 +166 +150 +48 +58 +59 +123 +102 +54 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +158 +125 +46 +83 +78 +61 +48 +58 +59 +63 +74 +74 +91 +92 +89 +70 +79 +77 +48 +58 +59 +75 +74 +61 +152 +119 +47 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +137 +127 +115 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +146 +135 +124 +234 +204 +183 +63 +74 +74 +83 +78 +61 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +152 +119 +47 +83 +78 +61 +48 +58 +59 +70 +79 +77 +109 +106 +99 +133 +120 +107 +120 +114 +108 +84 +85 +82 +48 +58 +59 +61 +67 +58 +111 +94 +57 +158 +125 +46 +171 +129 +45 +171 +129 +45 +88 +82 +59 +58 +69 +70 +238 +205 +179 +172 +150 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +212 +120 +56 +95 +78 +64 +43 +57 +62 +70 +79 +77 +84 +85 +82 +63 +74 +74 +48 +58 +59 +118 +86 +65 +225 +124 +48 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +126 +45 +112 +85 +63 +55 +66 +67 +227 +196 +175 +255 +215 +190 +120 +114 +108 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +155 +100 +63 +62 +63 +61 +51 +62 +63 +77 +85 +81 +77 +85 +81 +51 +62 +63 +62 +63 +61 +155 +100 +63 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +125 +52 +199 +115 +54 +56 +64 +60 +120 +114 +108 +255 +215 +190 +217 +187 +166 +43 +57 +62 +125 +90 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +227 +126 +50 +224 +123 +55 +106 +82 +65 +48 +58 +59 +63 +74 +74 +84 +85 +82 +70 +79 +77 +43 +57 +62 +95 +78 +64 +212 +120 +56 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +101 +100 +92 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +234 +125 +52 +183 +110 +59 +51 +62 +63 +172 +150 +134 +251 +192 +154 +248 +180 +134 +249 +174 +124 +249 +174 +124 +248 +180 +134 +236 +186 +153 +63 +74 +74 +95 +78 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +227 +126 +50 +227 +126 +50 +135 +94 +64 +51 +62 +63 +55 +66 +67 +84 +85 +82 +70 +79 +77 +41 +58 +57 +81 +73 +62 +199 +115 +54 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +255 +215 +190 +194 +173 +157 +58 +69 +70 +62 +63 +61 +106 +82 +65 +95 +78 +64 +51 +62 +63 +91 +92 +89 +238 +205 +179 +161 +144 +134 +48 +58 +59 +183 +110 +59 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +125 +52 +173 +106 +60 +65 +67 +64 +48 +58 +59 +77 +85 +81 +84 +85 +82 +55 +66 +67 +56 +64 +60 +146 +97 +64 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +209 +117 +53 +69 +69 +61 +101 +100 +92 +227 +196 +175 +63 +74 +74 +135 +94 +64 +234 +125 +52 +224 +123 +55 +227 +126 +50 +227 +126 +50 +89 +75 +66 +101 +100 +92 +250 +197 +158 +252 +185 +144 +249 +174 +124 +249 +174 +124 +250 +176 +132 +251 +192 +154 +120 +114 +108 +62 +63 +61 +209 +117 +53 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +188 +112 +56 +76 +70 +64 +41 +58 +57 +77 +85 +81 +84 +85 +82 +58 +69 +70 +48 +58 +59 +125 +90 +64 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +234 +126 +45 +139 +96 +61 +55 +66 +67 +250 +200 +166 +249 +174 +124 +249 +152 +92 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +243 +101 +2 +247 +103 +7 +247 +103 +7 +247 +111 +26 +247 +118 +39 +247 +130 +53 +250 +139 +73 +246 +156 +93 +249 +174 +124 +203 +161 +131 +55 +48 +48 +24 +22 +23 +35 +31 +30 +85 +71 +43 +137 +110 +49 +152 +119 +47 +168 +127 +42 +171 +129 +45 +171 +129 +45 +168 +127 +42 +152 +119 +47 +117 +98 +55 +59 +50 +39 +35 +31 +30 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +152 +119 +47 +224 +207 +180 +253 +255 +252 +253 +255 +252 +253 +255 +252 +146 +135 +124 +65 +58 +56 +35 +31 +30 +24 +22 +23 +24 +22 +23 +35 +31 +30 +35 +31 +30 +35 +31 +30 +35 +31 +30 +24 +22 +23 +83 +53 +42 +236 +108 +29 +236 +108 +29 +226 +110 +35 +94 +60 +47 +65 +58 +56 +253 +212 +188 +255 +215 +190 +238 +205 +179 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +161 +127 +40 +168 +127 +42 +145 +114 +49 +105 +93 +60 +83 +78 +61 +83 +78 +61 +111 +94 +57 +158 +125 +46 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +88 +82 +59 +51 +62 +63 +217 +187 +166 +255 +215 +190 +176 +156 +141 +43 +57 +62 +105 +93 +60 +171 +129 +45 +158 +125 +46 +158 +125 +46 +161 +127 +40 +168 +127 +42 +137 +110 +49 +88 +82 +59 +69 +69 +61 +62 +63 +61 +63 +69 +60 +75 +74 +61 +105 +93 +60 +152 +119 +47 +171 +129 +45 +168 +127 +42 +158 +125 +46 +171 +129 +45 +129 +106 +52 +48 +58 +59 +194 +173 +157 +207 +178 +158 +43 +57 +62 +100 +89 +56 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +152 +119 +47 +111 +94 +57 +83 +78 +61 +83 +78 +61 +105 +93 +60 +145 +114 +49 +168 +127 +42 +161 +127 +40 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +88 +82 +59 +84 +85 +82 +245 +212 +186 +77 +85 +81 +75 +74 +61 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +168 +127 +42 +129 +106 +52 +95 +87 +59 +81 +73 +62 +95 +87 +59 +123 +102 +54 +168 +127 +42 +168 +127 +42 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +56 +64 +60 +137 +127 +115 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +137 +127 +115 +255 +215 +190 +161 +144 +134 +48 +58 +59 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +168 +127 +42 +129 +106 +52 +88 +82 +59 +69 +69 +61 +62 +63 +61 +63 +69 +60 +75 +74 +61 +117 +98 +55 +152 +119 +47 +171 +129 +45 +161 +127 +40 +158 +125 +46 +171 +129 +45 +111 +94 +57 +48 +58 +59 +227 +196 +175 +176 +156 +141 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +227 +126 +50 +227 +126 +50 +163 +104 +61 +112 +85 +63 +95 +78 +64 +118 +86 +65 +173 +106 +60 +227 +126 +50 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +125 +52 +183 +110 +59 +51 +62 +63 +133 +120 +107 +255 +215 +190 +255 +215 +190 +217 +187 +166 +51 +62 +63 +106 +82 +65 +234 +126 +45 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +126 +45 +199 +115 +54 +135 +94 +64 +95 +78 +64 +95 +78 +64 +135 +94 +64 +199 +115 +54 +234 +125 +52 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +126 +45 +106 +82 +65 +51 +62 +63 +217 +187 +166 +255 +215 +190 +255 +215 +190 +120 +114 +108 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +227 +126 +50 +173 +106 +60 +118 +86 +65 +95 +78 +64 +112 +85 +63 +163 +104 +61 +227 +126 +50 +227 +126 +50 +227 +126 +50 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +101 +100 +92 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +227 +126 +50 +183 +110 +59 +51 +62 +63 +172 +150 +134 +252 +185 +144 +249 +174 +124 +247 +165 +111 +247 +165 +111 +249 +174 +124 +252 +185 +144 +154 +133 +118 +48 +58 +59 +163 +104 +61 +234 +126 +45 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +125 +52 +188 +112 +56 +125 +90 +64 +95 +78 +64 +106 +82 +65 +155 +100 +63 +224 +123 +55 +234 +125 +52 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +137 +127 +115 +253 +212 +188 +91 +92 +89 +69 +69 +61 +194 +112 +58 +234 +126 +45 +234 +126 +45 +163 +104 +61 +51 +62 +63 +137 +127 +115 +238 +205 +179 +63 +74 +74 +89 +75 +66 +227 +126 +50 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +209 +117 +53 +146 +97 +64 +106 +82 +65 +95 +78 +64 +125 +90 +64 +194 +112 +58 +234 +126 +45 +227 +126 +50 +224 +123 +55 +227 +126 +50 +234 +126 +45 +125 +90 +64 +41 +58 +57 +194 +173 +157 +238 +205 +179 +63 +74 +74 +135 +94 +64 +234 +125 +52 +224 +123 +55 +227 +126 +50 +227 +126 +50 +89 +75 +66 +101 +100 +92 +251 +192 +154 +250 +176 +132 +251 +168 +115 +247 +165 +111 +249 +174 +124 +245 +179 +138 +195 +157 +134 +41 +58 +57 +135 +94 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +224 +123 +55 +234 +125 +52 +214 +121 +50 +146 +97 +64 +106 +82 +65 +95 +78 +64 +125 +90 +64 +183 +110 +59 +227 +126 +50 +227 +126 +50 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +234 +125 +52 +139 +96 +61 +55 +66 +67 +250 +200 +166 +249 +174 +124 +249 +152 +92 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +247 +103 +7 +246 +109 +10 +247 +111 +26 +247 +118 +39 +247 +130 +53 +247 +143 +74 +249 +159 +103 +250 +176 +132 +219 +170 +138 +115 +102 +92 +47 +40 +38 +24 +22 +23 +35 +31 +30 +47 +40 +38 +59 +50 +39 +59 +50 +39 +59 +50 +39 +59 +50 +39 +47 +40 +38 +47 +40 +38 +71 +60 +43 +137 +110 +49 +171 +129 +45 +158 +125 +46 +158 +125 +46 +152 +119 +47 +170 +137 +67 +219 +212 +208 +237 +233 +225 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +219 +212 +208 +152 +147 +147 +109 +106 +99 +65 +67 +64 +35 +31 +30 +35 +31 +30 +35 +31 +30 +35 +31 +30 +24 +22 +23 +94 +60 +47 +178 +86 +46 +109 +63 +45 +35 +31 +30 +124 +111 +99 +251 +209 +178 +251 +209 +178 +234 +204 +183 +76 +78 +76 +95 +87 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +117 +98 +55 +129 +106 +52 +168 +127 +42 +168 +127 +42 +171 +129 +45 +168 +127 +42 +168 +127 +42 +171 +129 +45 +161 +127 +40 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +117 +98 +55 +48 +58 +59 +146 +135 +124 +255 +215 +190 +255 +215 +190 +255 +215 +190 +120 +114 +108 +51 +62 +63 +123 +102 +54 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +168 +127 +42 +158 +125 +46 +152 +119 +47 +152 +119 +47 +158 +125 +46 +168 +127 +42 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +158 +125 +46 +81 +73 +62 +58 +69 +70 +227 +196 +175 +255 +215 +190 +120 +114 +108 +48 +58 +59 +129 +106 +52 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +161 +127 +40 +168 +127 +42 +168 +127 +42 +168 +127 +42 +171 +129 +45 +168 +127 +42 +168 +127 +42 +152 +119 +47 +117 +98 +55 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +88 +82 +59 +84 +85 +82 +255 +215 +190 +176 +156 +141 +48 +58 +59 +111 +94 +57 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +168 +127 +42 +168 +127 +42 +168 +127 +42 +168 +127 +42 +158 +125 +46 +158 +125 +46 +145 +114 +49 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +137 +127 +115 +58 +69 +70 +117 +98 +55 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +63 +69 +60 +137 +127 +115 +255 +215 +190 +238 +205 +179 +91 +92 +89 +56 +64 +60 +137 +110 +49 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +168 +127 +42 +158 +125 +46 +152 +119 +47 +158 +125 +46 +168 +127 +42 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +152 +119 +47 +69 +69 +61 +84 +85 +82 +245 +212 +186 +172 +150 +134 +62 +63 +61 +199 +115 +54 +227 +126 +50 +224 +123 +55 +227 +126 +50 +199 +115 +54 +125 +90 +64 +227 +126 +50 +227 +126 +50 +227 +126 +50 +234 +125 +52 +227 +126 +50 +234 +125 +52 +234 +125 +52 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +214 +121 +50 +81 +73 +62 +63 +74 +74 +227 +196 +175 +255 +215 +190 +253 +212 +188 +255 +215 +190 +146 +135 +124 +48 +58 +59 +146 +97 +64 +234 +126 +45 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +126 +45 +227 +126 +50 +227 +126 +50 +234 +126 +45 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +126 +45 +139 +96 +61 +48 +58 +59 +146 +135 +124 +255 +215 +190 +253 +212 +188 +255 +215 +190 +217 +187 +166 +55 +66 +67 +95 +78 +64 +225 +124 +48 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +125 +52 +227 +126 +50 +227 +126 +50 +227 +126 +50 +224 +123 +55 +234 +126 +45 +163 +104 +61 +183 +110 +59 +227 +126 +50 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +97 +98 +96 +56 +64 +60 +188 +112 +56 +227 +126 +50 +224 +123 +55 +227 +126 +50 +183 +110 +59 +51 +62 +63 +167 +142 +123 +248 +180 +134 +247 +165 +111 +249 +159 +103 +246 +156 +93 +249 +159 +103 +249 +174 +124 +239 +182 +144 +77 +85 +81 +65 +67 +64 +199 +115 +54 +234 +125 +52 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +125 +52 +227 +126 +50 +227 +126 +50 +234 +125 +52 +227 +126 +50 +227 +126 +50 +135 +94 +64 +188 +112 +56 +227 +126 +50 +224 +123 +55 +227 +126 +50 +209 +117 +53 +65 +67 +64 +146 +135 +124 +227 +196 +175 +43 +57 +62 +146 +97 +64 +234 +126 +45 +224 +123 +55 +224 +123 +55 +234 +126 +45 +106 +82 +65 +70 +79 +77 +253 +212 +188 +176 +156 +141 +41 +58 +57 +125 +90 +64 +234 +126 +45 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +125 +52 +234 +125 +52 +227 +126 +50 +234 +125 +52 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +126 +45 +155 +100 +63 +48 +58 +59 +120 +114 +108 +253 +212 +188 +234 +204 +183 +63 +74 +74 +135 +94 +64 +234 +126 +45 +224 +123 +55 +227 +126 +50 +227 +126 +50 +89 +75 +66 +101 +100 +92 +252 +185 +144 +245 +169 +119 +249 +159 +103 +249 +159 +103 +247 +165 +111 +249 +174 +124 +251 +192 +154 +109 +106 +99 +62 +63 +61 +188 +112 +56 +234 +125 +52 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +125 +52 +234 +125 +52 +227 +126 +50 +234 +125 +52 +227 +126 +50 +227 +126 +50 +212 +120 +56 +199 +115 +54 +224 +123 +55 +224 +123 +55 +224 +123 +55 +234 +126 +45 +139 +96 +61 +55 +66 +67 +250 +200 +166 +249 +174 +124 +247 +150 +84 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +243 +101 +2 +243 +101 +2 +247 +103 +7 +247 +111 +26 +247 +111 +26 +247 +123 +41 +247 +130 +60 +243 +141 +78 +249 +159 +103 +250 +176 +132 +251 +192 +154 +207 +178 +158 +154 +133 +118 +82 +69 +65 +24 +22 +23 +71 +60 +43 +101 +83 +47 +101 +83 +47 +101 +83 +47 +117 +98 +55 +145 +114 +49 +171 +129 +45 +168 +127 +42 +160 +120 +43 +160 +120 +43 +158 +125 +46 +192 +155 +91 +237 +233 +225 +81 +77 +76 +55 +48 +48 +74 +68 +68 +81 +77 +76 +89 +84 +82 +91 +92 +89 +89 +84 +82 +81 +77 +76 +65 +58 +56 +47 +40 +38 +35 +31 +30 +55 +48 +48 +115 +102 +92 +172 +150 +134 +55 +48 +48 +24 +22 +23 +24 +22 +23 +24 +22 +23 +65 +58 +56 +230 +173 +136 +251 +192 +154 +250 +197 +158 +250 +200 +166 +84 +85 +82 +88 +82 +59 +171 +129 +45 +158 +125 +46 +158 +125 +46 +171 +129 +45 +83 +78 +61 +69 +69 +61 +168 +127 +42 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +171 +129 +45 +117 +98 +55 +48 +58 +59 +101 +100 +92 +238 +205 +179 +253 +204 +176 +250 +200 +166 +253 +204 +176 +238 +205 +179 +91 +92 +89 +51 +62 +63 +117 +98 +55 +171 +129 +45 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +161 +127 +40 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +171 +129 +45 +145 +114 +49 +75 +74 +61 +48 +58 +59 +172 +150 +134 +253 +212 +188 +255 +215 +190 +234 +204 +183 +84 +85 +82 +56 +64 +60 +129 +106 +52 +171 +129 +45 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +168 +127 +42 +81 +73 +62 +63 +69 +60 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +83 +78 +61 +84 +85 +82 +255 +215 +190 +245 +212 +186 +109 +106 +99 +51 +62 +63 +123 +102 +54 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +161 +127 +40 +171 +129 +45 +105 +93 +60 +51 +62 +63 +137 +110 +49 +168 +127 +42 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +137 +127 +115 +58 +69 +70 +111 +94 +57 +171 +129 +45 +158 +125 +46 +158 +125 +46 +158 +125 +46 +62 +63 +61 +137 +127 +115 +255 +215 +190 +255 +215 +190 +227 +196 +175 +77 +85 +81 +56 +64 +60 +129 +106 +52 +171 +129 +45 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +161 +127 +40 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +168 +127 +42 +137 +110 +49 +69 +69 +61 +51 +62 +63 +187 +166 +150 +255 +215 +190 +172 +150 +134 +51 +62 +63 +194 +112 +58 +227 +126 +50 +224 +123 +55 +234 +125 +52 +183 +110 +59 +48 +58 +59 +155 +100 +63 +234 +126 +45 +224 +123 +55 +224 +123 +55 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +125 +52 +209 +117 +53 +89 +75 +66 +48 +58 +59 +187 +166 +150 +250 +200 +166 +250 +197 +158 +251 +192 +154 +250 +197 +158 +250 +200 +166 +109 +106 +99 +48 +58 +59 +135 +94 +64 +234 +125 +52 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +227 +126 +50 +135 +94 +64 +43 +57 +62 +120 +114 +108 +250 +200 +166 +250 +197 +158 +251 +192 +154 +250 +197 +158 +250 +200 +166 +172 +150 +134 +41 +58 +57 +106 +82 +65 +214 +121 +50 +234 +125 +52 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +224 +123 +55 +227 +126 +50 +234 +126 +45 +183 +110 +59 +48 +58 +59 +135 +94 +64 +234 +126 +45 +224 +123 +55 +227 +126 +50 +188 +112 +56 +51 +62 +63 +109 +106 +99 +51 +62 +63 +183 +110 +59 +227 +126 +50 +224 +123 +55 +234 +125 +52 +173 +106 +60 +48 +58 +59 +178 +146 +122 +245 +169 +119 +246 +156 +93 +247 +150 +84 +249 +146 +83 +247 +150 +84 +249 +159 +103 +249 +174 +124 +203 +161 +131 +58 +69 +70 +76 +70 +64 +194 +112 +58 +234 +126 +45 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +126 +45 +183 +110 +59 +48 +58 +59 +163 +104 +61 +234 +126 +45 +224 +123 +55 +227 +126 +50 +209 +117 +53 +62 +63 +61 +146 +135 +124 +217 +187 +166 +43 +57 +62 +163 +104 +61 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +126 +45 +125 +90 +64 +58 +69 +70 +234 +204 +183 +255 +215 +190 +137 +127 +115 +41 +58 +57 +118 +86 +65 +225 +124 +48 +234 +126 +45 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +126 +45 +146 +97 +64 +51 +62 +63 +97 +98 +96 +238 +205 +179 +255 +215 +190 +234 +204 +183 +63 +74 +74 +118 +86 +65 +234 +126 +45 +224 +123 +55 +227 +126 +50 +227 +126 +50 +81 +73 +62 +101 +100 +92 +250 +176 +132 +247 +165 +111 +246 +156 +93 +249 +152 +92 +249 +159 +103 +251 +168 +115 +252 +185 +144 +217 +187 +166 +58 +69 +70 +69 +69 +61 +199 +115 +54 +234 +126 +45 +227 +126 +50 +224 +123 +55 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +224 +123 +55 +227 +126 +50 +225 +124 +48 +81 +73 +62 +81 +73 +62 +227 +126 +50 +227 +126 +50 +224 +123 +55 +234 +126 +45 +139 +96 +61 +55 +66 +67 +250 +197 +158 +249 +174 +124 +247 +150 +84 +247 +130 +60 +247 +118 +39 +247 +111 +26 +247 +103 +7 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +237 +95 +0 +237 +95 +0 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +237 +95 +0 +243 +101 +2 +247 +103 +7 +236 +102 +14 +247 +111 +26 +246 +116 +28 +247 +123 +41 +247 +130 +60 +243 +141 +78 +249 +159 +103 +249 +174 +124 +249 +189 +146 +253 +204 +176 +124 +111 +99 +35 +31 +30 +145 +114 +49 +175 +132 +40 +171 +129 +45 +168 +127 +42 +192 +155 +91 +216 +194 +154 +224 +207 +180 +224 +207 +180 +216 +194 +154 +216 +194 +154 +239 +227 +208 +253 +255 +252 +253 +255 +252 +186 +181 +179 +146 +135 +124 +120 +114 +108 +109 +106 +99 +95 +78 +64 +71 +60 +43 +85 +71 +43 +101 +83 +47 +108 +87 +46 +35 +31 +30 +150 +125 +114 +227 +196 +175 +255 +215 +190 +253 +212 +188 +212 +173 +150 +121 +100 +85 +95 +78 +64 +129 +102 +78 +234 +168 +124 +250 +176 +132 +250 +176 +132 +248 +180 +134 +249 +189 +146 +124 +111 +99 +62 +63 +61 +152 +119 +47 +171 +129 +45 +171 +129 +45 +145 +114 +49 +56 +64 +60 +43 +57 +62 +83 +78 +61 +152 +119 +47 +171 +129 +45 +171 +129 +45 +168 +127 +42 +168 +127 +42 +171 +129 +45 +171 +129 +45 +152 +119 +47 +95 +87 +59 +48 +58 +59 +101 +100 +92 +236 +186 +153 +251 +192 +154 +252 +185 +144 +248 +180 +134 +245 +179 +138 +249 +189 +146 +236 +186 +153 +101 +100 +92 +48 +58 +59 +88 +82 +59 +137 +110 +49 +168 +127 +42 +171 +129 +45 +168 +127 +42 +168 +127 +42 +168 +127 +42 +168 +127 +42 +171 +129 +45 +171 +129 +45 +168 +127 +42 +145 +114 +49 +100 +89 +56 +56 +64 +60 +58 +69 +70 +172 +150 +134 +250 +200 +166 +251 +192 +154 +250 +197 +158 +250 +200 +166 +217 +187 +166 +84 +85 +82 +51 +62 +63 +105 +93 +60 +158 +125 +46 +171 +129 +45 +171 +129 +45 +168 +127 +42 +168 +127 +42 +168 +127 +42 +171 +129 +45 +152 +119 +47 +83 +78 +61 +43 +57 +62 +48 +58 +59 +129 +106 +52 +175 +132 +40 +171 +129 +45 +158 +125 +46 +63 +69 +60 +120 +114 +108 +255 +215 +190 +255 +215 +190 +227 +196 +175 +84 +85 +82 +51 +62 +63 +105 +93 +60 +158 +125 +46 +171 +129 +45 +171 +129 +45 +168 +127 +42 +168 +127 +42 +168 +127 +42 +171 +129 +45 +158 +125 +46 +105 +93 +60 +48 +58 +59 +48 +58 +59 +129 +106 +52 +168 +127 +42 +158 +125 +46 +168 +127 +42 +145 +114 +49 +51 +62 +63 +172 +150 +134 +91 +92 +89 +75 +74 +61 +168 +127 +42 +171 +129 +45 +175 +132 +40 +117 +98 +55 +48 +58 +59 +176 +156 +141 +253 +204 +176 +253 +204 +176 +253 +204 +176 +217 +187 +166 +84 +85 +82 +48 +58 +59 +95 +87 +59 +145 +114 +49 +168 +127 +42 +171 +129 +45 +168 +127 +42 +168 +127 +42 +168 +127 +42 +168 +127 +42 +171 +129 +45 +171 +129 +45 +158 +125 +46 +137 +110 +49 +95 +87 +59 +51 +62 +63 +70 +79 +77 +187 +166 +150 +251 +209 +178 +251 +209 +178 +207 +178 +158 +43 +57 +62 +135 +94 +64 +238 +123 +45 +234 +126 +45 +234 +126 +45 +118 +86 +65 +35 +56 +60 +56 +64 +60 +155 +100 +63 +234 +125 +52 +234 +126 +45 +234 +125 +52 +227 +126 +50 +227 +126 +50 +234 +126 +45 +227 +126 +50 +163 +104 +61 +76 +70 +64 +51 +62 +63 +167 +142 +123 +251 +192 +154 +248 +180 +134 +249 +174 +124 +249 +174 +124 +250 +176 +132 +245 +179 +138 +236 +186 +153 +109 +106 +99 +41 +58 +57 +95 +78 +64 +183 +110 +59 +234 +125 +52 +234 +126 +45 +234 +125 +52 +227 +126 +50 +227 +126 +50 +234 +125 +52 +234 +126 +45 +227 +126 +50 +183 +110 +59 +95 +78 +64 +43 +57 +62 +124 +111 +99 +236 +186 +153 +252 +185 +144 +250 +176 +132 +249 +174 +124 +249 +174 +124 +248 +180 +134 +251 +192 +154 +154 +133 +118 +43 +57 +62 +81 +73 +62 +173 +106 +60 +227 +126 +50 +234 +126 +45 +227 +126 +50 +227 +126 +50 +227 +126 +50 +234 +126 +45 +234 +125 +52 +155 +100 +63 +56 +64 +60 +35 +56 +60 +89 +75 +66 +227 +126 +50 +234 +126 +45 +238 +128 +40 +146 +97 +64 +43 +57 +62 +176 +156 +141 +58 +69 +70 +118 +86 +65 +234 +126 +45 +234 +126 +45 +234 +126 +45 +112 +85 +63 +43 +57 +62 +210 +156 +119 +245 +162 +103 +247 +150 +84 +247 +143 +74 +248 +138 +64 +241 +138 +68 +249 +146 +83 +249 +159 +103 +250 +176 +132 +195 +157 +134 +58 +69 +70 +65 +67 +64 +155 +100 +63 +227 +126 +50 +234 +126 +45 +227 +126 +50 +227 +126 +50 +234 +125 +52 +234 +126 +45 +234 +126 +45 +173 +106 +60 +65 +67 +64 +35 +56 +60 +106 +82 +65 +234 +126 +45 +234 +126 +45 +238 +128 +40 +146 +97 +64 +43 +57 +62 +187 +166 +150 +234 +204 +183 +55 +66 +67 +106 +82 +65 +234 +126 +45 +234 +125 +52 +234 +125 +52 +224 +123 +55 +81 +73 +62 +91 +92 +89 +245 +212 +186 +253 +212 +188 +253 +212 +188 +137 +127 +115 +41 +58 +57 +89 +75 +66 +173 +106 +60 +227 +126 +50 +234 +126 +45 +227 +126 +50 +227 +126 +50 +227 +126 +50 +234 +125 +52 +234 +126 +45 +234 +125 +52 +194 +112 +58 +106 +82 +65 +43 +57 +62 +101 +100 +92 +227 +196 +175 +251 +209 +178 +251 +209 +178 +253 +212 +188 +97 +98 +96 +69 +69 +61 +209 +117 +53 +234 +126 +45 +238 +128 +40 +173 +106 +60 +51 +62 +63 +139 +115 +96 +251 +168 +115 +246 +156 +93 +247 +150 +84 +249 +146 +83 +249 +152 +92 +247 +165 +111 +248 +180 +134 +250 +200 +166 +187 +166 +150 +55 +66 +67 +69 +69 +61 +163 +104 +61 +234 +125 +52 +234 +126 +45 +234 +125 +52 +227 +126 +50 +227 +126 +50 +234 +126 +45 +234 +126 +45 +199 +115 +54 +95 +78 +64 +35 +56 +60 +81 +73 +62 +227 +126 +50 +227 +126 +50 +224 +123 +55 +234 +126 +45 +139 +96 +61 +51 +62 +63 +250 +197 +158 +245 +169 +119 +247 +150 +84 +247 +130 +60 +247 +118 +39 +235 +107 +16 +243 +101 +2 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +246 +97 +3 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +246 +97 +3 +237 +95 +0 +243 +101 +2 +247 +103 +7 +236 +102 +14 +247 +111 +26 +246 +116 +28 +238 +123 +45 +241 +132 +59 +247 +143 +74 +246 +156 +93 +245 +169 +119 +230 +173 +136 +47 +40 +38 +59 +50 +39 +168 +127 +42 +161 +127 +40 +160 +120 +43 +192 +155 +91 +255 +238 +227 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +253 +255 +252 +239 +227 +208 +170 +137 +67 +171 +129 +45 +171 +129 +45 +171 +129 +45 +59 +50 +39 +154 +133 +118 +250 +200 +166 +250 +197 +158 +249 +189 +146 +248 +180 +134 +249 +174 +124 +247 +165 +111 +247 +165 +111 +245 +162 +103 +249 +159 +103 +245 +162 +103 +247 +165 +111 +249 +174 +124 +203 +161 +131 +55 +66 +67 +69 +69 +61 +111 +94 +57 +105 +93 +60 +69 +69 +61 +63 +74 +74 +137 +127 +115 +51 +62 +63 +62 +63 +61 +95 +87 +59 +129 +106 +52 +137 +110 +49 +137 +110 +49 +123 +102 +54 +95 +87 +59 +62 +63 +61 +51 +62 +63 +133 +120 +107 +239 +182 +144 +248 +180 +134 +245 +169 +119 +247 +165 +111 +249 +159 +103 +245 +162 +103 +251 +168 +115 +250 +176 +132 +239 +182 +144 +154 +133 +118 +63 +74 +74 +51 +62 +63 +75 +74 +61 +105 +93 +60 +123 +102 +54 +137 +110 +49 +137 +110 +49 +137 +110 +49 +123 +102 +54 +100 +89 +56 +75 +74 +61 +56 +64 +60 +55 +66 +67 +124 +111 +99 +219 +170 +138 +252 +185 +144 +250 +176 +132 +249 +174 +124 +249 +174 +124 +250 +176 +132 +252 +185 +144 +236 +186 +153 +124 +111 +99 +48 +58 +59 +63 +69 +60 +95 +87 +59 +123 +102 +54 +137 +110 +49 +137 +110 +49 +129 +106 +52 +95 +87 +59 +62 +63 +61 +55 +66 +67 +146 +135 +124 +77 +85 +81 +61 +67 +58 +105 +93 +60 +111 +94 +57 +75 +74 +61 +48 +58 +59 +194 +173 +157 +255 +215 +190 +255 +215 +190 +255 +215 +190 +234 +204 +183 +120 +114 +108 +43 +57 +62 +69 +69 +61 +100 +89 +56 +129 +106 +52 +137 +110 +49 +137 +110 +49 +129 +106 +52 +105 +93 +60 +69 +69 +61 +48 +58 +59 +77 +85 +81 +51 +62 +63 +137 +110 +49 +168 +127 +42 +158 +125 +46 +168 +127 +42 +137 +110 +49 +51 +62 +63 +187 +166 +150 +187 +166 +150 +48 +58 +59 +75 +74 +61 +111 +94 +57 +95 +87 +59 +56 +64 +60 +99 +90 +79 +239 +182 +144 +252 +185 +144 +245 +179 +138 +252 +185 +144 +249 +189 +146 +236 +186 +153 +137 +127 +115 +55 +66 +67 +56 +64 +60 +83 +78 +61 +111 +94 +57 +129 +106 +52 +137 +110 +49 +137 +110 +49 +129 +106 +52 +117 +98 +55 +95 +87 +59 +69 +69 +61 +51 +62 +63 +63 +74 +74 +133 +120 +107 +236 +186 +153 +250 +197 +158 +251 +192 +154 +251 +192 +154 +250 +197 +158 +124 +111 +99 +51 +62 +63 +112 +85 +63 +146 +97 +64 +106 +82 +65 +48 +58 +59 +120 +114 +108 +101 +100 +92 +48 +58 +59 +95 +78 +64 +146 +97 +64 +183 +110 +59 +188 +112 +56 +173 +106 +60 +139 +96 +61 +89 +75 +66 +48 +58 +59 +77 +85 +81 +186 +157 +134 +245 +179 +138 +245 +169 +119 +245 +162 +103 +246 +156 +93 +246 +156 +93 +246 +156 +93 +247 +165 +111 +249 +174 +124 +249 +189 +146 +154 +133 +118 +58 +69 +70 +51 +62 +63 +95 +78 +64 +139 +96 +61 +173 +106 +60 +183 +110 +59 +183 +110 +59 +173 +106 +60 +139 +96 +61 +95 +78 +64 +51 +62 +63 +63 +74 +74 +167 +142 +123 +249 +189 +146 +249 +174 +124 +247 +165 +111 +246 +156 +93 +246 +156 +93 +246 +156 +93 +245 +162 +103 +245 +169 +119 +245 +179 +138 +178 +146 +122 +70 +79 +77 +48 +58 +59 +89 +75 +66 +139 +96 +61 +173 +106 +60 +188 +112 +56 +183 +110 +59 +155 +100 +63 +95 +78 +64 +48 +58 +59 +101 +100 +92 +146 +135 +124 +48 +58 +59 +95 +78 +64 +146 +97 +64 +125 +90 +64 +62 +63 +61 +101 +100 +92 +245 +212 +186 +137 +127 +115 +48 +58 +59 +106 +82 +65 +146 +97 +64 +106 +82 +65 +48 +58 +59 +124 +111 +99 +247 +165 +111 +247 +150 +84 +241 +138 +68 +241 +132 +59 +247 +130 +53 +247 +130 +53 +242 +133 +67 +241 +145 +79 +245 +162 +103 +250 +176 +132 +203 +161 +131 +91 +92 +89 +43 +57 +62 +81 +73 +62 +135 +94 +64 +173 +106 +60 +188 +112 +56 +183 +110 +59 +155 +100 +63 +106 +82 +65 +51 +62 +63 +91 +92 +89 +133 +120 +107 +48 +58 +59 +95 +78 +64 +146 +97 +64 +118 +86 +65 +56 +64 +60 +101 +100 +92 +245 +212 +186 +253 +212 +188 +146 +135 +124 +48 +58 +59 +118 +86 +65 +183 +110 +59 +173 +106 +60 +95 +78 +64 +43 +57 +62 +186 +157 +134 +250 +197 +158 +251 +192 +154 +250 +197 +158 +250 +200 +166 +172 +150 +134 +70 +79 +77 +48 +58 +59 +89 +75 +66 +135 +94 +64 +163 +104 +61 +183 +110 +59 +183 +110 +59 +173 +106 +60 +146 +97 +64 +95 +78 +64 +56 +64 +60 +55 +66 +67 +150 +125 +114 +236 +186 +153 +251 +192 +154 +249 +189 +146 +249 +189 +146 +251 +192 +154 +195 +157 +134 +51 +62 +63 +76 +70 +64 +139 +96 +61 +125 +90 +64 +65 +67 +64 +76 +78 +76 +234 +168 +124 +249 +159 +103 +247 +150 +84 +243 +141 +78 +247 +143 +74 +247 +150 +84 +249 +159 +103 +250 +176 +132 +250 +197 +158 +255 +215 +190 +207 +178 +158 +84 +85 +82 +48 +58 +59 +89 +75 +66 +146 +97 +64 +173 +106 +60 +183 +110 +59 +183 +110 +59 +163 +104 +61 +118 +86 +65 +62 +63 +61 +58 +69 +70 +63 +74 +74 +81 +73 +62 +227 +126 +50 +227 +126 +50 +224 +123 +55 +234 +126 +45 +135 +94 +64 +58 +69 +70 +251 +192 +154 +245 +169 +119 +249 +146 +83 +247 +130 +53 +238 +116 +34 +235 +107 +16 +243 +101 +2 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +246 +97 +3 +246 +97 +3 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +243 +101 +2 +236 +102 +14 +236 +102 +14 +235 +107 +16 +246 +116 +28 +239 +117 +44 +241 +132 +59 +247 +143 +74 +249 +152 +92 +214 +151 +109 +118 +86 +65 +146 +111 +88 +192 +155 +91 +192 +155 +91 +195 +167 +113 +239 +227 +208 +255 +238 +227 +255 +238 +227 +255 +238 +227 +255 +238 +227 +255 +238 +227 +255 +238 +227 +255 +238 +227 +255 +238 +227 +255 +238 +227 +255 +238 +227 +255 +238 +227 +255 +238 +227 +255 +238 +227 +255 +238 +227 +216 +194 +154 +192 +155 +91 +192 +155 +91 +192 +155 +91 +146 +111 +88 +162 +125 +96 +250 +176 +132 +245 +169 +119 +247 +165 +111 +249 +159 +103 +246 +156 +93 +247 +150 +84 +243 +141 +78 +243 +141 +78 +243 +141 +78 +241 +145 +79 +247 +150 +84 +249 +159 +103 +245 +169 +119 +187 +140 +108 +89 +84 +82 +48 +58 +59 +48 +58 +59 +91 +92 +89 +194 +173 +157 +255 +215 +190 +207 +178 +158 +109 +106 +99 +51 +62 +63 +48 +58 +59 +51 +62 +63 +48 +58 +59 +48 +58 +59 +55 +66 +67 +124 +111 +99 +203 +161 +131 +248 +180 +134 +245 +169 +119 +249 +159 +103 +247 +150 +84 +243 +141 +78 +243 +141 +78 +243 +141 +78 +247 +150 +84 +249 +159 +103 +245 +169 +119 +248 +180 +134 +219 +170 +138 +154 +133 +118 +84 +85 +82 +51 +62 +63 +48 +58 +59 +51 +62 +63 +51 +62 +63 +48 +58 +59 +48 +58 +59 +55 +66 +67 +91 +92 +89 +154 +133 +118 +209 +171 +139 +245 +179 +138 +249 +174 +124 +247 +165 +111 +249 +159 +103 +246 +156 +93 +246 +156 +93 +249 +159 +103 +247 +165 +111 +249 +174 +124 +252 +185 +144 +195 +157 +134 +109 +106 +99 +55 +66 +67 +48 +58 +59 +51 +62 +63 +51 +62 +63 +48 +58 +59 +51 +62 +63 +109 +106 +99 +207 +178 +158 +255 +215 +190 +217 +187 +166 +91 +92 +89 +51 +62 +63 +48 +58 +59 +76 +78 +76 +172 +150 +134 +253 +212 +188 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +255 +215 +190 +194 +173 +157 +101 +100 +92 +51 +62 +63 +48 +58 +59 +48 +58 +59 +51 +62 +63 +48 +58 +59 +48 +58 +59 +97 +98 +96 +194 +173 +157 +146 +135 +124 +56 +64 +60 +145 +114 +49 +168 +127 +42 +158 +125 +46 +168 +127 +42 +129 +106 +52 +48 +58 +59 +194 +173 +157 +255 +215 +190 +176 +156 +141 +76 +78 +76 +48 +58 +59 +55 +66 +67 +115 +102 +92 +234 +168 +124 +245 +169 +119 +247 +165 +111 +247 +165 +111 +247 +165 +111 +245 +169 +119 +249 +174 +124 +245 +179 +138 +209 +171 +139 +144 +125 +110 +76 +78 +76 +48 +58 +59 +48 +58 +59 +51 +62 +63 +51 +62 +63 +48 +58 +59 +48 +58 +59 +58 +69 +70 +101 +100 +92 +154 +133 +118 +219 +170 +138 +252 +185 +144 +248 +180 +134 +249 +174 +124 +245 +169 +119 +249 +174 +124 +250 +176 +132 +230 +173 +136 +124 +111 +99 +55 +66 +67 +43 +57 +62 +58 +69 +70 +137 +127 +115 +245 +212 +186 +245 +212 +186 +161 +144 +134 +70 +79 +77 +43 +57 +62 +51 +62 +63 +51 +62 +63 +48 +58 +59 +43 +57 +62 +84 +85 +82 +154 +133 +118 +240 +181 +138 +249 +174 +124 +247 +165 +111 +249 +152 +92 +243 +141 +78 +241 +138 +68 +242 +133 +67 +241 +138 +68 +241 +145 +79 +246 +156 +93 +247 +165 +111 +250 +176 +132 +219 +170 +138 +144 +125 +110 +77 +85 +81 +43 +57 +62 +48 +58 +59 +48 +58 +59 +51 +62 +63 +48 +58 +59 +43 +57 +62 +77 +85 +81 +150 +125 +114 +219 +170 +138 +250 +176 +132 +247 +165 +111 +246 +156 +93 +241 +145 +79 +241 +138 +68 +241 +138 +68 +241 +138 +68 +243 +141 +78 +249 +152 +92 +247 +165 +111 +250 +176 +132 +230 +173 +136 +154 +133 +118 +77 +85 +81 +43 +57 +62 +48 +58 +59 +51 +62 +63 +48 +58 +59 +43 +57 +62 +70 +79 +77 +161 +144 +134 +245 +212 +186 +255 +215 +190 +161 +144 +134 +63 +74 +74 +43 +57 +62 +51 +62 +63 +109 +106 +99 +217 +187 +166 +251 +209 +178 +238 +205 +179 +137 +127 +115 +58 +69 +70 +43 +57 +62 +58 +69 +70 +139 +115 +96 +238 +159 +107 +249 +152 +92 +241 +138 +68 +247 +130 +53 +238 +123 +45 +239 +117 +44 +247 +118 +39 +238 +123 +45 +241 +132 +59 +241 +145 +79 +249 +159 +103 +249 +174 +124 +240 +181 +138 +167 +142 +123 +91 +92 +89 +43 +57 +62 +48 +58 +59 +51 +62 +63 +48 +58 +59 +43 +57 +62 +63 +74 +74 +137 +127 +115 +234 +204 +183 +255 +215 +190 +146 +135 +124 +63 +74 +74 +43 +57 +62 +51 +62 +63 +115 +102 +92 +236 +186 +153 +251 +192 +154 +251 +192 +154 +236 +186 +153 +133 +120 +107 +43 +57 +62 +48 +58 +59 +48 +58 +59 +55 +66 +67 +158 +130 +108 +248 +180 +134 +250 +176 +132 +249 +174 +124 +249 +174 +124 +250 +176 +132 +252 +185 +144 +239 +182 +144 +154 +133 +118 +84 +85 +82 +43 +57 +62 +48 +58 +59 +48 +58 +59 +51 +62 +63 +48 +58 +59 +43 +57 +62 +70 +79 +77 +133 +120 +107 +219 +170 +138 +245 +179 +138 +250 +176 +132 +245 +169 +119 +247 +165 +111 +247 +165 +111 +245 +169 +119 +249 +174 +124 +187 +140 +108 +81 +77 +76 +43 +57 +62 +43 +57 +62 +99 +90 +79 +214 +151 +109 +249 +159 +103 +247 +150 +84 +247 +143 +74 +241 +138 +68 +241 +138 +68 +249 +146 +83 +249 +159 +103 +250 +176 +132 +250 +197 +158 +255 +215 +190 +255 +215 +190 +245 +212 +186 +161 +144 +134 +77 +85 +81 +43 +57 +62 +48 +58 +59 +51 +62 +63 +48 +58 +59 +41 +58 +57 +55 +66 +67 +120 +114 +108 +217 +187 +166 +97 +98 +96 +95 +78 +64 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +125 +52 +112 +85 +63 +70 +79 +77 +249 +189 +146 +247 +165 +111 +243 +141 +78 +247 +130 +53 +238 +116 +34 +236 +102 +14 +243 +101 +2 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +235 +94 +9 +235 +94 +9 +236 +102 +14 +235 +107 +16 +236 +108 +29 +239 +117 +44 +238 +123 +53 +242 +133 +67 +241 +145 +79 +241 +153 +96 +247 +165 +111 +249 +174 +124 +250 +176 +132 +245 +179 +138 +252 +185 +144 +249 +189 +146 +249 +189 +146 +249 +189 +146 +249 +189 +146 +249 +189 +146 +249 +189 +146 +249 +189 +146 +249 +189 +146 +249 +189 +146 +249 +189 +146 +249 +189 +146 +249 +189 +146 +249 +189 +146 +249 +189 +146 +252 +185 +144 +245 +179 +138 +250 +176 +132 +249 +174 +124 +245 +169 +119 +245 +162 +103 +241 +153 +96 +241 +145 +86 +243 +141 +78 +241 +138 +68 +242 +133 +67 +241 +132 +59 +238 +123 +53 +238 +123 +53 +238 +123 +53 +241 +132 +59 +242 +133 +67 +243 +141 +78 +241 +145 +86 +249 +159 +103 +238 +159 +107 +210 +156 +119 +210 +156 +119 +240 +181 +138 +249 +189 +146 +251 +192 +154 +251 +192 +154 +250 +197 +158 +212 +173 +150 +186 +157 +134 +167 +142 +123 +167 +142 +123 +195 +157 +134 +219 +170 +138 +248 +180 +134 +245 +169 +119 +245 +162 +103 +247 +150 +84 +243 +141 +78 +241 +132 +59 +238 +123 +53 +238 +123 +53 +238 +123 +53 +241 +132 +59 +241 +138 +68 +247 +150 +84 +245 +162 +103 +245 +169 +119 +250 +176 +132 +239 +182 +144 +219 +170 +138 +186 +157 +134 +167 +142 +123 +167 +142 +123 +172 +150 +134 +195 +157 +134 +219 +170 +138 +239 +182 +144 +248 +180 +134 +245 +169 +119 +245 +162 +103 +241 +153 +96 +241 +145 +79 +241 +138 +68 +241 +138 +68 +241 +138 +68 +241 +138 +68 +241 +145 +79 +241 +153 +96 +247 +165 +111 +249 +174 +124 +245 +179 +138 +219 +170 +138 +186 +157 +134 +167 +142 +123 +167 +142 +123 +186 +157 +134 +212 +173 +150 +250 +197 +158 +251 +192 +154 +251 +192 +154 +249 +189 +146 +239 +182 +144 +219 +170 +138 +219 +170 +138 +239 +182 +144 +250 +197 +158 +250 +200 +166 +251 +209 +178 +238 +205 +179 +172 +150 +134 +137 +127 +115 +161 +144 +134 +217 +187 +166 +253 +212 +188 +227 +196 +175 +194 +173 +157 +176 +156 +141 +172 +150 +134 +187 +166 +150 +217 +187 +166 +255 +215 +190 +245 +212 +186 +76 +78 +76 +75 +74 +61 +158 +125 +46 +158 +125 +46 +158 +125 +46 +171 +129 +45 +105 +93 +60 +58 +69 +70 +217 +187 +166 +255 +215 +190 +253 +204 +176 +236 +186 +153 +210 +156 +119 +210 +156 +119 +247 +165 +111 +249 +159 +103 +249 +152 +92 +241 +145 +86 +243 +141 +78 +241 +145 +79 +247 +150 +84 +241 +153 +96 +245 +162 +103 +245 +169 +119 +248 +180 +134 +239 +182 +144 +209 +171 +139 +186 +157 +134 +167 +142 +123 +167 +142 +123 +178 +146 +122 +195 +157 +134 +230 +173 +136 +239 +182 +144 +250 +176 +132 +245 +169 +119 +247 +165 +111 +249 +159 +103 +241 +153 +96 +249 +152 +92 +249 +152 +92 +241 +153 +96 +245 +162 +103 +247 +165 +111 +210 +156 +119 +210 +156 +119 +230 +173 +136 +249 +189 +146 +249 +189 +146 +251 +192 +154 +250 +197 +158 +236 +186 +153 +203 +161 +131 +167 +142 +123 +167 +142 +123 +178 +146 +122 +203 +161 +131 +240 +181 +138 +249 +174 +124 +247 +165 +111 +241 +153 +96 +243 +141 +78 +242 +133 +67 +238 +123 +53 +238 +123 +45 +238 +123 +45 +238 +123 +45 +241 +132 +59 +241 +138 +68 +241 +145 +86 +249 +159 +103 +245 +169 +119 +250 +176 +132 +240 +181 +138 +209 +171 +139 +178 +146 +122 +167 +142 +123 +167 +142 +123 +186 +157 +134 +209 +171 +139 +240 +181 +138 +250 +176 +132 +245 +169 +119 +249 +159 +103 +241 +145 +86 +241 +138 +68 +241 +132 +59 +238 +123 +45 +238 +123 +45 +238 +123 +45 +247 +130 +53 +242 +133 +67 +241 +145 +79 +241 +153 +96 +247 +165 +111 +250 +176 +132 +240 +181 +138 +203 +161 +131 +178 +146 +122 +167 +142 +123 +167 +142 +123 +195 +157 +134 +236 +186 +153 +251 +192 +154 +251 +192 +154 +249 +189 +146 +249 +189 +146 +230 +173 +136 +203 +161 +131 +219 +170 +138 +245 +179 +138 +245 +179 +138 +245 +179 +138 +245 +179 +138 +248 +180 +134 +234 +168 +124 +214 +151 +109 +214 +151 +109 +245 +162 +103 +241 +145 +86 +241 +138 +68 +238 +123 +53 +239 +117 +44 +238 +116 +34 +236 +108 +29 +236 +108 +29 +238 +116 +34 +238 +123 +45 +241 +132 +59 +243 +141 +78 +241 +153 +96 +247 +165 +111 +249 +174 +124 +240 +181 +138 +209 +171 +139 +178 +146 +122 +167 +142 +123 +167 +142 +123 +195 +157 +134 +236 +186 +153 +250 +197 +158 +251 +192 +154 +249 +189 +146 +249 +189 +146 +230 +173 +136 +210 +156 +119 +210 +156 +119 +250 +176 +132 +249 +174 +124 +249 +174 +124 +249 +174 +124 +249 +174 +124 +250 +176 +132 +210 +156 +119 +162 +125 +96 +162 +125 +96 +214 +151 +109 +247 +165 +111 +245 +162 +103 +241 +153 +96 +241 +153 +96 +241 +153 +96 +249 +159 +103 +247 +165 +111 +245 +169 +119 +250 +176 +132 +240 +181 +138 +209 +171 +139 +186 +157 +134 +167 +142 +123 +167 +142 +123 +178 +146 +122 +203 +161 +131 +239 +182 +144 +248 +180 +134 +245 +169 +119 +245 +162 +103 +241 +153 +96 +241 +145 +86 +241 +145 +86 +241 +145 +86 +247 +150 +84 +241 +153 +96 +245 +162 +103 +238 +159 +107 +204 +141 +99 +214 +151 +109 +241 +153 +96 +249 +152 +92 +243 +141 +78 +242 +133 +67 +241 +132 +59 +241 +132 +59 +241 +138 +68 +241 +145 +79 +245 +162 +103 +248 +180 +134 +212 +173 +150 +146 +135 +124 +137 +127 +115 +176 +156 +141 +234 +204 +183 +253 +212 +188 +217 +187 +166 +187 +166 +150 +172 +150 +134 +176 +156 +141 +194 +173 +157 +234 +204 +183 +255 +215 +190 +194 +173 +157 +43 +57 +62 +139 +96 +61 +234 +126 +45 +224 +123 +55 +227 +126 +50 +227 +126 +50 +89 +75 +66 +101 +100 +92 +245 +179 +138 +245 +162 +103 +241 +138 +68 +238 +123 +45 +236 +108 +29 +236 +102 +14 +235 +94 +9 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +235 +94 +9 +235 +94 +9 +236 +102 +14 +235 +107 +16 +236 +108 +29 +238 +116 +34 +238 +123 +45 +241 +132 +59 +241 +138 +68 +241 +145 +79 +249 +152 +92 +241 +153 +96 +245 +162 +103 +245 +162 +103 +247 +165 +111 +247 +165 +111 +247 +165 +111 +247 +165 +111 +247 +165 +111 +247 +165 +111 +247 +165 +111 +247 +165 +111 +247 +165 +111 +247 +165 +111 +247 +165 +111 +247 +165 +111 +247 +165 +111 +247 +165 +111 +245 +162 +103 +245 +162 +103 +241 +153 +96 +241 +153 +96 +241 +145 +86 +243 +141 +78 +241 +138 +68 +241 +132 +59 +238 +123 +53 +238 +123 +45 +239 +117 +44 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +239 +117 +44 +238 +123 +45 +238 +123 +53 +241 +132 +59 +243 +141 +78 +241 +145 +86 +241 +153 +96 +245 +162 +103 +245 +162 +103 +247 +165 +111 +247 +165 +111 +245 +169 +119 +245 +169 +119 +245 +169 +119 +249 +174 +124 +245 +169 +119 +245 +169 +119 +245 +169 +119 +247 +165 +111 +241 +153 +96 +241 +145 +86 +243 +141 +78 +241 +132 +59 +238 +123 +53 +239 +117 +44 +238 +116 +34 +238 +116 +34 +238 +116 +34 +239 +117 +44 +238 +123 +45 +241 +132 +59 +241 +138 +68 +241 +145 +86 +241 +153 +96 +245 +162 +103 +245 +169 +119 +249 +174 +124 +250 +176 +132 +250 +176 +132 +250 +176 +132 +249 +174 +124 +245 +169 +119 +247 +165 +111 +241 +153 +96 +241 +145 +86 +243 +141 +78 +242 +133 +67 +241 +132 +59 +238 +123 +45 +238 +123 +45 +238 +123 +45 +238 +123 +45 +241 +132 +59 +242 +133 +67 +243 +141 +78 +249 +152 +92 +245 +162 +103 +247 +165 +111 +245 +169 +119 +245 +169 +119 +245 +169 +119 +245 +169 +119 +245 +169 +119 +245 +169 +119 +245 +169 +119 +247 +165 +111 +247 +165 +111 +247 +165 +111 +247 +165 +111 +245 +169 +119 +249 +174 +124 +245 +179 +138 +251 +192 +154 +232 +190 +161 +101 +100 +92 +51 +62 +63 +63 +69 +60 +51 +62 +63 +55 +66 +67 +109 +106 +99 +176 +156 +141 +234 +204 +183 +255 +215 +190 +255 +215 +190 +255 +215 +190 +245 +212 +186 +207 +178 +158 +91 +92 +89 +51 +62 +63 +129 +106 +52 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +75 +74 +61 +91 +92 +89 +245 +212 +186 +250 +200 +166 +252 +185 +144 +249 +174 +124 +247 +165 +111 +241 +153 +96 +241 +145 +79 +241 +138 +68 +242 +133 +67 +241 +132 +59 +238 +123 +53 +241 +132 +59 +241 +132 +59 +241 +138 +68 +243 +141 +78 +241 +145 +86 +241 +153 +96 +247 +165 +111 +245 +169 +119 +249 +174 +124 +250 +176 +132 +250 +176 +132 +249 +174 +124 +249 +174 +124 +245 +169 +119 +245 +162 +103 +241 +153 +96 +241 +145 +86 +241 +145 +79 +241 +138 +68 +242 +133 +67 +242 +133 +67 +242 +133 +67 +241 +138 +68 +243 +141 +78 +241 +145 +86 +241 +153 +96 +241 +153 +96 +245 +162 +103 +245 +162 +103 +247 +165 +111 +245 +169 +119 +245 +169 +119 +245 +169 +119 +245 +169 +119 +245 +169 +119 +245 +169 +119 +245 +169 +119 +247 +165 +111 +245 +162 +103 +241 +153 +96 +241 +145 +79 +241 +138 +68 +238 +123 +53 +238 +123 +45 +238 +116 +34 +235 +113 +30 +235 +113 +30 +238 +116 +34 +239 +117 +44 +238 +123 +45 +241 +132 +59 +241 +138 +68 +241 +145 +86 +241 +153 +96 +245 +162 +103 +245 +169 +119 +245 +169 +119 +249 +174 +124 +249 +174 +124 +245 +169 +119 +245 +169 +119 +245 +162 +103 +241 +153 +96 +241 +145 +86 +241 +138 +68 +241 +132 +59 +238 +123 +45 +239 +117 +44 +238 +116 +34 +235 +113 +30 +235 +113 +30 +238 +116 +34 +238 +123 +45 +241 +132 +59 +241 +138 +68 +241 +145 +86 +241 +153 +96 +245 +162 +103 +247 +165 +111 +245 +169 +119 +245 +169 +119 +245 +169 +119 +245 +169 +119 +245 +169 +119 +245 +169 +119 +247 +165 +111 +247 +165 +111 +247 +165 +111 +245 +162 +103 +245 +162 +103 +245 +162 +103 +245 +162 +103 +245 +162 +103 +245 +162 +103 +245 +162 +103 +245 +162 +103 +241 +153 +96 +241 +153 +96 +241 +145 +86 +243 +141 +78 +241 +132 +59 +238 +123 +53 +239 +117 +44 +235 +113 +30 +236 +108 +29 +235 +107 +16 +235 +107 +16 +236 +108 +29 +235 +113 +30 +239 +117 +44 +238 +123 +53 +242 +133 +67 +241 +145 +79 +241 +153 +96 +245 +162 +103 +247 +165 +111 +245 +169 +119 +245 +169 +119 +249 +174 +124 +245 +169 +119 +245 +169 +119 +245 +169 +119 +245 +169 +119 +247 +165 +111 +247 +165 +111 +245 +162 +103 +245 +162 +103 +241 +153 +96 +241 +153 +96 +241 +153 +96 +241 +153 +96 +241 +153 +96 +241 +153 +96 +241 +153 +96 +241 +153 +96 +241 +153 +96 +241 +153 +96 +249 +152 +92 +241 +145 +86 +243 +141 +78 +241 +138 +68 +241 +138 +68 +241 +138 +68 +241 +138 +68 +243 +141 +78 +241 +145 +86 +241 +153 +96 +245 +162 +103 +245 +169 +119 +245 +169 +119 +249 +174 +124 +249 +174 +124 +249 +174 +124 +245 +169 +119 +247 +165 +111 +241 +153 +96 +241 +145 +86 +243 +141 +78 +241 +138 +68 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +138 +68 +243 +141 +78 +241 +145 +79 +241 +145 +79 +241 +145 +79 +243 +141 +78 +241 +138 +68 +241 +132 +59 +238 +123 +53 +238 +123 +53 +238 +123 +53 +242 +133 +67 +241 +145 +86 +247 +165 +111 +210 +156 +119 +63 +74 +74 +62 +63 +61 +69 +69 +61 +48 +58 +59 +63 +74 +74 +133 +120 +107 +194 +173 +157 +245 +212 +186 +255 +215 +190 +255 +215 +190 +255 +215 +190 +245 +212 +186 +176 +156 +141 +55 +66 +67 +76 +70 +64 +212 +120 +56 +227 +126 +50 +224 +123 +55 +234 +125 +52 +194 +112 +58 +56 +64 +60 +154 +133 +118 +250 +176 +132 +241 +153 +96 +242 +133 +67 +239 +117 +44 +236 +108 +29 +236 +102 +14 +235 +94 +9 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +235 +94 +9 +235 +94 +9 +236 +102 +14 +236 +102 +14 +236 +108 +29 +235 +113 +30 +239 +117 +44 +238 +123 +45 +238 +123 +53 +241 +132 +59 +241 +138 +68 +241 +138 +68 +243 +141 +78 +243 +141 +78 +241 +145 +79 +241 +145 +79 +241 +145 +79 +241 +145 +79 +241 +145 +79 +241 +145 +79 +241 +145 +79 +241 +145 +79 +241 +145 +79 +241 +145 +79 +241 +145 +79 +243 +141 +78 +243 +141 +78 +243 +141 +78 +241 +138 +68 +241 +138 +68 +241 +132 +59 +241 +132 +59 +238 +123 +53 +238 +123 +45 +238 +116 +34 +238 +116 +34 +236 +108 +29 +236 +108 +29 +235 +107 +16 +235 +107 +16 +235 +107 +16 +236 +108 +29 +236 +108 +29 +235 +113 +30 +238 +116 +34 +238 +123 +45 +238 +123 +53 +241 +132 +59 +242 +133 +67 +241 +138 +68 +243 +141 +78 +243 +141 +78 +241 +145 +79 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +243 +141 +78 +241 +138 +68 +241 +132 +59 +238 +123 +53 +239 +117 +44 +238 +116 +34 +236 +108 +29 +236 +108 +29 +235 +107 +16 +235 +107 +16 +236 +108 +29 +238 +116 +34 +239 +117 +44 +238 +123 +45 +241 +132 +59 +241 +138 +68 +243 +141 +78 +241 +145 +86 +249 +152 +92 +241 +153 +96 +241 +153 +96 +241 +153 +96 +249 +152 +92 +241 +145 +86 +243 +141 +78 +241 +138 +68 +241 +132 +59 +238 +123 +53 +238 +123 +45 +238 +116 +34 +235 +113 +30 +236 +108 +29 +236 +108 +29 +235 +113 +30 +238 +116 +34 +238 +123 +45 +238 +123 +53 +241 +132 +59 +241 +138 +68 +241 +145 +79 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +79 +241 +145 +79 +241 +145 +79 +241 +145 +86 +241 +153 +96 +245 +162 +103 +245 +169 +119 +245 +179 +138 +144 +125 +110 +51 +62 +63 +117 +98 +55 +158 +125 +46 +145 +114 +49 +105 +93 +60 +69 +69 +61 +48 +58 +59 +58 +69 +70 +91 +92 +89 +120 +114 +108 +120 +114 +108 +91 +92 +89 +48 +58 +59 +56 +64 +60 +123 +102 +54 +171 +129 +45 +158 +125 +46 +158 +125 +46 +168 +127 +42 +137 +110 +49 +48 +58 +59 +161 +144 +134 +250 +197 +158 +248 +180 +134 +247 +165 +111 +241 +153 +96 +241 +145 +79 +241 +138 +68 +241 +132 +59 +238 +123 +53 +238 +123 +45 +239 +117 +44 +238 +116 +34 +238 +116 +34 +239 +117 +44 +238 +123 +45 +238 +123 +53 +241 +132 +59 +241 +138 +68 +243 +141 +78 +241 +145 +86 +249 +152 +92 +241 +153 +96 +241 +153 +96 +241 +153 +96 +241 +145 +86 +241 +145 +86 +243 +141 +78 +241 +138 +68 +241 +132 +59 +238 +123 +53 +238 +123 +45 +238 +123 +45 +239 +117 +44 +238 +123 +45 +238 +123 +45 +238 +123 +53 +241 +132 +59 +241 +132 +59 +241 +138 +68 +241 +138 +68 +243 +141 +78 +241 +145 +79 +241 +145 +79 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +79 +243 +141 +78 +242 +133 +67 +241 +132 +59 +238 +123 +45 +238 +116 +34 +235 +113 +30 +236 +108 +29 +235 +107 +16 +235 +107 +16 +235 +107 +16 +236 +108 +29 +235 +113 +30 +239 +117 +44 +238 +123 +45 +241 +132 +59 +241 +138 +68 +243 +141 +78 +241 +145 +86 +241 +145 +86 +241 +153 +96 +241 +153 +96 +241 +145 +86 +241 +145 +86 +243 +141 +78 +241 +138 +68 +241 +132 +59 +238 +123 +45 +239 +117 +44 +235 +113 +30 +236 +108 +29 +235 +107 +16 +235 +107 +16 +235 +107 +16 +236 +108 +29 +235 +113 +30 +239 +117 +44 +238 +123 +45 +241 +132 +59 +242 +133 +67 +243 +141 +78 +241 +145 +79 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +79 +241 +145 +79 +243 +141 +78 +243 +141 +78 +243 +141 +78 +243 +141 +78 +241 +138 +68 +241 +138 +68 +241 +138 +68 +241 +138 +68 +241 +138 +68 +241 +138 +68 +242 +133 +67 +241 +132 +59 +238 +123 +53 +238 +123 +45 +238 +116 +34 +236 +108 +29 +235 +107 +16 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +235 +107 +16 +236 +108 +29 +238 +116 +34 +238 +123 +45 +238 +123 +53 +242 +133 +67 +241 +138 +68 +241 +145 +79 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +86 +241 +145 +79 +243 +141 +78 +243 +141 +78 +241 +138 +68 +241 +138 +68 +241 +138 +68 +242 +133 +67 +242 +133 +67 +242 +133 +67 +241 +138 +68 +241 +138 +68 +241 +138 +68 +241 +138 +68 +242 +133 +67 +241 +132 +59 +241 +132 +59 +238 +123 +53 +238 +123 +45 +238 +123 +45 +238 +123 +45 +238 +123 +45 +238 +123 +53 +241 +132 +59 +241 +138 +68 +243 +141 +78 +241 +145 +86 +241 +145 +86 +241 +153 +96 +241 +153 +96 +241 +145 +86 +241 +145 +86 +243 +141 +78 +241 +138 +68 +241 +132 +59 +238 +123 +53 +238 +123 +45 +239 +117 +44 +239 +117 +44 +239 +117 +44 +239 +117 +44 +238 +123 +45 +238 +123 +53 +238 +123 +53 +241 +132 +59 +241 +132 +59 +238 +123 +53 +238 +123 +45 +239 +117 +44 +239 +117 +44 +239 +117 +44 +238 +123 +53 +242 +133 +67 +241 +145 +86 +238 +159 +107 +84 +85 +82 +69 +69 +61 +188 +112 +56 +214 +121 +50 +173 +106 +60 +112 +85 +63 +62 +63 +61 +41 +58 +57 +63 +74 +74 +97 +98 +96 +120 +114 +108 +109 +106 +99 +77 +85 +81 +41 +58 +57 +81 +73 +62 +194 +112 +58 +234 +125 +52 +224 +123 +55 +224 +123 +55 +234 +126 +45 +125 +90 +64 +51 +62 +63 +209 +171 +139 +245 +169 +119 +241 +145 +86 +241 +132 +59 +238 +116 +34 +235 +107 +16 +236 +102 +14 +235 +94 +9 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +237 +95 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +235 +94 +9 +235 +94 +9 +236 +102 +14 +235 +107 +16 +236 +108 +29 +235 +113 +30 +238 +116 +34 +239 +117 +44 +238 +123 +45 +238 +123 +45 +238 +123 +45 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +45 +238 +123 +45 +239 +117 +44 +239 +117 +44 +238 +116 +34 +235 +113 +30 +236 +108 +29 +235 +107 +16 +235 +107 +16 +236 +102 +14 +236 +102 +14 +235 +94 +9 +235 +94 +9 +235 +94 +9 +236 +102 +14 +236 +102 +14 +235 +107 +16 +236 +108 +29 +236 +108 +29 +238 +116 +34 +239 +117 +44 +239 +117 +44 +238 +123 +45 +238 +123 +45 +238 +123 +53 +238 +123 +53 +238 +123 +53 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +238 +123 +53 +238 +123 +53 +238 +123 +45 +239 +117 +44 +238 +116 +34 +236 +108 +29 +235 +107 +16 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +235 +107 +16 +236 +108 +29 +235 +113 +30 +238 +116 +34 +238 +123 +45 +238 +123 +53 +238 +123 +53 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +238 +123 +53 +238 +123 +45 +239 +117 +44 +238 +116 +34 +236 +108 +29 +235 +107 +16 +235 +107 +16 +236 +102 +14 +236 +102 +14 +235 +107 +16 +236 +108 +29 +236 +108 +29 +238 +116 +34 +239 +117 +44 +238 +123 +45 +238 +123 +53 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +53 +241 +132 +59 +241 +138 +68 +241 +145 +86 +238 +159 +107 +234 +168 +124 +84 +85 +82 +83 +78 +61 +171 +129 +45 +158 +125 +46 +168 +127 +42 +168 +127 +42 +158 +125 +46 +129 +106 +52 +100 +89 +56 +83 +78 +61 +75 +74 +61 +69 +69 +61 +83 +78 +61 +105 +93 +60 +152 +119 +47 +168 +127 +42 +158 +125 +46 +158 +125 +46 +161 +127 +40 +168 +127 +42 +75 +74 +61 +63 +74 +74 +236 +186 +153 +245 +179 +138 +238 +159 +107 +241 +145 +86 +241 +138 +68 +241 +132 +59 +238 +123 +45 +238 +116 +34 +235 +113 +30 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +238 +116 +34 +239 +117 +44 +238 +123 +45 +238 +123 +53 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +238 +123 +53 +238 +123 +53 +238 +123 +45 +239 +117 +44 +238 +116 +34 +235 +113 +30 +236 +108 +29 +236 +108 +29 +236 +108 +29 +235 +113 +30 +238 +116 +34 +238 +116 +34 +239 +117 +44 +238 +123 +45 +238 +123 +45 +238 +123 +53 +238 +123 +53 +238 +123 +53 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +238 +123 +53 +238 +123 +45 +239 +117 +44 +238 +116 +34 +235 +113 +30 +236 +108 +29 +236 +102 +14 +236 +102 +14 +236 +102 +14 +235 +94 +9 +236 +102 +14 +236 +102 +14 +235 +107 +16 +236 +108 +29 +235 +113 +30 +238 +116 +34 +238 +123 +45 +238 +123 +53 +238 +123 +53 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +238 +123 +53 +238 +123 +53 +238 +123 +45 +238 +116 +34 +235 +113 +30 +236 +108 +29 +235 +107 +16 +236 +102 +14 +236 +102 +14 +235 +94 +9 +236 +102 +14 +236 +102 +14 +235 +107 +16 +236 +108 +29 +235 +113 +30 +238 +116 +34 +238 +123 +45 +238 +123 +53 +238 +123 +53 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +45 +238 +123 +45 +238 +123 +45 +238 +123 +45 +238 +123 +45 +238 +123 +45 +238 +123 +45 +238 +123 +45 +239 +117 +44 +239 +117 +44 +238 +116 +34 +236 +108 +29 +236 +108 +29 +235 +107 +16 +236 +102 +14 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +236 +102 +14 +236 +102 +14 +235 +107 +16 +236 +108 +29 +238 +116 +34 +239 +117 +44 +238 +123 +45 +238 +123 +53 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +238 +123 +53 +238 +123 +53 +238 +123 +53 +238 +123 +45 +238 +123 +45 +238 +123 +45 +238 +123 +45 +239 +117 +44 +239 +117 +44 +239 +117 +44 +238 +123 +45 +238 +123 +45 +238 +123 +45 +238 +123 +45 +238 +123 +45 +239 +117 +44 +239 +117 +44 +238 +116 +34 +235 +113 +30 +236 +108 +29 +236 +108 +29 +235 +113 +30 +238 +116 +34 +239 +117 +44 +238 +123 +45 +238 +123 +53 +238 +123 +53 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +241 +132 +59 +238 +123 +53 +238 +123 +45 +239 +117 +44 +238 +116 +34 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +235 +113 +30 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +235 +113 +30 +236 +108 +29 +235 +113 +30 +238 +116 +34 +238 +123 +45 +241 +132 +59 +241 +145 +86 +204 +141 +99 +41 +58 +57 +155 +100 +63 +234 +126 +45 +227 +126 +50 +227 +126 +50 +234 +125 +52 +209 +117 +53 +155 +100 +63 +118 +86 +65 +89 +75 +66 +81 +73 +62 +81 +73 +62 +106 +82 +65 +155 +100 +63 +214 +121 +50 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +194 +112 +58 +56 +64 +60 +109 +106 +99 +245 +179 +138 +245 +162 +103 +241 +138 +68 +238 +123 +45 +235 +113 +30 +236 +102 +14 +235 +94 +9 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +235 +94 +9 +235 +94 +9 +235 +94 +9 +236 +102 +14 +236 +102 +14 +235 +107 +16 +235 +107 +16 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +235 +113 +30 +235 +113 +30 +235 +113 +30 +235 +113 +30 +235 +113 +30 +235 +113 +30 +235 +113 +30 +235 +113 +30 +235 +113 +30 +235 +113 +30 +235 +113 +30 +235 +113 +30 +235 +113 +30 +235 +113 +30 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +235 +107 +16 +236 +102 +14 +236 +102 +14 +236 +102 +14 +235 +94 +9 +235 +94 +9 +235 +94 +9 +230 +97 +5 +230 +97 +5 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +236 +102 +14 +236 +102 +14 +235 +107 +16 +236 +108 +29 +236 +108 +29 +236 +108 +29 +235 +113 +30 +235 +113 +30 +235 +113 +30 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +235 +113 +30 +236 +108 +29 +236 +108 +29 +235 +107 +16 +236 +102 +14 +236 +102 +14 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +236 +102 +14 +235 +107 +16 +236 +108 +29 +236 +108 +29 +235 +113 +30 +238 +116 +34 +238 +116 +34 +239 +117 +44 +239 +117 +44 +239 +117 +44 +238 +116 +34 +238 +116 +34 +235 +113 +30 +236 +108 +29 +236 +108 +29 +235 +107 +16 +236 +102 +14 +236 +102 +14 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +236 +102 +14 +236 +102 +14 +235 +107 +16 +236 +108 +29 +236 +108 +29 +235 +113 +30 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +235 +113 +30 +235 +113 +30 +238 +116 +34 +238 +123 +45 +238 +123 +53 +241 +138 +68 +241 +145 +86 +238 +159 +107 +89 +84 +82 +75 +74 +61 +168 +127 +42 +168 +127 +42 +158 +125 +46 +158 +125 +46 +161 +127 +40 +168 +127 +42 +171 +129 +45 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +171 +129 +45 +168 +127 +42 +158 +125 +46 +158 +125 +46 +168 +127 +42 +171 +129 +45 +95 +87 +59 +48 +58 +59 +167 +142 +123 +245 +179 +138 +238 +159 +107 +241 +145 +86 +242 +133 +67 +238 +123 +45 +238 +116 +34 +236 +108 +29 +236 +108 +29 +235 +107 +16 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +235 +107 +16 +236 +108 +29 +236 +108 +29 +235 +113 +30 +238 +116 +34 +238 +116 +34 +239 +117 +44 +239 +117 +44 +239 +117 +44 +238 +116 +34 +238 +116 +34 +235 +113 +30 +236 +108 +29 +236 +108 +29 +235 +107 +16 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +235 +107 +16 +235 +107 +16 +236 +108 +29 +236 +108 +29 +236 +108 +29 +235 +113 +30 +235 +113 +30 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +235 +113 +30 +236 +108 +29 +235 +107 +16 +236 +102 +14 +236 +102 +14 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +236 +102 +14 +235 +107 +16 +236 +108 +29 +236 +108 +29 +235 +113 +30 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +235 +113 +30 +236 +108 +29 +236 +108 +29 +235 +107 +16 +236 +102 +14 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +236 +102 +14 +236 +102 +14 +235 +107 +16 +236 +108 +29 +235 +113 +30 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +235 +113 +30 +235 +113 +30 +235 +113 +30 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +235 +107 +16 +235 +107 +16 +236 +102 +14 +236 +102 +14 +235 +94 +9 +235 +94 +9 +235 +94 +9 +230 +97 +5 +235 +94 +9 +235 +94 +9 +235 +94 +9 +236 +102 +14 +236 +102 +14 +235 +107 +16 +236 +108 +29 +235 +113 +30 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +235 +113 +30 +235 +113 +30 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +236 +108 +29 +235 +107 +16 +235 +107 +16 +236 +102 +14 +236 +102 +14 +236 +102 +14 +235 +107 +16 +236 +108 +29 +236 +108 +29 +235 +113 +30 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +238 +116 +34 +235 +113 +30 +236 +108 +29 +236 +108 +29 +235 +107 +16 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +235 +107 +16 +235 +107 +16 +236 +108 +29 +236 +108 +29 +235 +107 +16 +235 +107 +16 +235 +107 +16 +236 +108 +29 +235 +113 +30 +239 +117 +44 +241 +132 +59 +241 +145 +79 +204 +141 +99 +48 +58 +59 +139 +96 +61 +234 +126 +45 +224 +123 +55 +224 +123 +55 +224 +123 +55 +227 +126 +50 +234 +126 +45 +234 +126 +45 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +126 +45 +234 +126 +45 +227 +126 +50 +224 +123 +55 +224 +123 +55 +234 +125 +52 +214 +121 +50 +81 +73 +62 +58 +69 +70 +219 +170 +138 +245 +169 +119 +241 +145 +86 +241 +132 +59 +239 +117 +44 +236 +108 +29 +236 +102 +14 +235 +94 +9 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +230 +97 +5 +235 +94 +9 +230 +97 +5 +229 +102 +7 +229 +102 +7 +236 +102 +14 +236 +102 +14 +224 +98 +18 +224 +98 +18 +224 +98 +18 +236 +102 +14 +224 +98 +18 +236 +102 +14 +236 +102 +14 +224 +98 +18 +224 +98 +18 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +224 +98 +18 +236 +102 +14 +236 +102 +14 +229 +102 +7 +229 +102 +7 +230 +97 +5 +235 +94 +9 +235 +94 +9 +230 +97 +5 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +235 +94 +9 +230 +97 +5 +235 +94 +9 +235 +94 +9 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +236 +102 +14 +224 +98 +18 +236 +102 +14 +235 +94 +9 +235 +94 +9 +235 +94 +9 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +235 +94 +9 +230 +97 +5 +229 +102 +7 +236 +102 +14 +236 +102 +14 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +236 +102 +14 +224 +98 +18 +236 +102 +14 +229 +102 +7 +230 +97 +5 +235 +94 +9 +235 +94 +9 +230 +97 +5 +231 +91 +2 +230 +97 +5 +235 +94 +9 +235 +94 +9 +235 +94 +9 +230 +97 +5 +229 +102 +7 +236 +102 +14 +236 +102 +14 +236 +102 +14 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +236 +102 +14 +224 +98 +18 +236 +102 +14 +235 +107 +16 +236 +108 +29 +239 +117 +44 +234 +125 +52 +231 +136 +72 +241 +153 +96 +162 +125 +96 +48 +58 +59 +95 +87 +59 +158 +125 +46 +171 +129 +45 +168 +127 +42 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +158 +125 +46 +168 +127 +42 +171 +129 +45 +158 +125 +46 +95 +87 +59 +48 +58 +59 +124 +111 +99 +245 +179 +138 +247 +165 +111 +241 +145 +86 +241 +132 +59 +238 +123 +45 +238 +116 +34 +236 +108 +29 +224 +98 +18 +229 +102 +7 +230 +97 +5 +235 +94 +9 +235 +94 +9 +230 +97 +5 +230 +97 +5 +230 +97 +5 +235 +94 +9 +230 +97 +5 +229 +102 +7 +236 +102 +14 +236 +102 +14 +236 +102 +14 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +236 +102 +14 +236 +102 +14 +236 +102 +14 +235 +94 +9 +230 +97 +5 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +236 +102 +14 +236 +102 +14 +236 +102 +14 +224 +98 +18 +224 +98 +18 +236 +102 +14 +236 +102 +14 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +224 +98 +18 +236 +102 +14 +229 +102 +7 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +229 +102 +7 +236 +102 +14 +224 +98 +18 +236 +102 +14 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +236 +102 +14 +224 +98 +18 +236 +102 +14 +229 +102 +7 +230 +97 +5 +235 +94 +9 +230 +97 +5 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +230 +97 +5 +235 +94 +9 +235 +94 +9 +229 +102 +7 +236 +102 +14 +236 +102 +14 +236 +102 +14 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +236 +102 +14 +235 +107 +16 +236 +102 +14 +224 +98 +18 +224 +98 +18 +236 +102 +14 +224 +98 +18 +224 +98 +18 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +229 +102 +7 +236 +102 +14 +235 +94 +9 +230 +97 +5 +235 +94 +9 +235 +94 +9 +230 +97 +5 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +235 +94 +9 +230 +97 +5 +230 +97 +5 +229 +102 +7 +236 +102 +14 +224 +98 +18 +236 +102 +14 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +236 +102 +14 +236 +102 +14 +236 +102 +14 +224 +98 +18 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +236 +102 +14 +224 +98 +18 +236 +102 +14 +236 +102 +14 +236 +102 +14 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +236 +102 +14 +236 +102 +14 +224 +98 +18 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +235 +107 +16 +236 +102 +14 +236 +102 +14 +236 +102 +14 +229 +102 +7 +230 +97 +5 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +235 +94 +9 +230 +97 +5 +235 +94 +9 +236 +102 +14 +236 +102 +14 +236 +102 +14 +229 +102 +7 +230 +97 +5 +229 +102 +7 +224 +98 +18 +236 +108 +29 +238 +116 +34 +238 +123 +53 +243 +141 +78 +241 +153 +96 +99 +90 +79 +56 +64 +60 +155 +100 +63 +234 +126 +45 +234 +126 +45 +227 +126 +50 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +227 +126 +50 +227 +126 +50 +224 +123 +55 +224 +123 +55 +227 +126 +50 +227 +126 +50 +234 +126 +45 +194 +112 +58 +81 +73 +62 +48 +58 +59 +178 +146 +122 +249 +174 +124 +241 +153 +96 +231 +136 +72 +234 +125 +52 +238 +116 +34 +235 +107 +16 +229 +102 +7 +235 +94 +9 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +229 +102 +7 +236 +102 +14 +235 +113 +30 +239 +117 +44 +230 +128 +60 +236 +147 +85 +238 +159 +107 +139 +115 +96 +48 +58 +59 +69 +69 +61 +111 +94 +57 +145 +114 +49 +158 +125 +46 +168 +127 +42 +171 +129 +45 +168 +127 +42 +168 +127 +42 +168 +127 +42 +168 +127 +42 +171 +129 +45 +168 +127 +42 +152 +119 +47 +117 +98 +55 +69 +69 +61 +48 +58 +59 +144 +125 +110 +240 +181 +138 +247 +165 +111 +236 +147 +85 +242 +133 +67 +238 +123 +45 +235 +113 +30 +235 +107 +16 +236 +102 +14 +230 +97 +5 +230 +97 +5 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +230 +97 +5 +229 +102 +7 +235 +107 +16 +235 +113 +30 +238 +123 +45 +242 +133 +67 +241 +153 +96 +214 +151 +109 +99 +90 +79 +48 +58 +59 +95 +78 +64 +155 +100 +63 +209 +117 +53 +227 +126 +50 +234 +125 +52 +234 +125 +52 +234 +125 +52 +234 +125 +52 +234 +125 +52 +234 +126 +45 +234 +126 +45 +227 +126 +50 +194 +112 +58 +125 +90 +64 +56 +64 +60 +58 +69 +70 +178 +146 +122 +250 +176 +132 +238 +159 +107 +241 +145 +79 +234 +125 +52 +239 +117 +44 +236 +108 +29 +224 +98 +18 +230 +97 +5 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +226 +93 +0 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +226 +93 +0 +226 +93 +0 +226 +93 +0 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +231 +91 +2 +226 +93 +0 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +231 +91 +2 +230 +97 +5 +229 +102 +7 +223 +103 +18 +226 +110 +35 +234 +125 +52 +231 +136 +72 +241 +153 +96 +245 +169 +119 +178 +146 +122 +101 +100 +92 +48 +58 +59 +56 +64 +60 +69 +69 +61 +95 +87 +59 +111 +94 +57 +123 +102 +54 +129 +106 +52 +129 +106 +52 +123 +102 +54 +105 +93 +60 +88 +82 +59 +62 +63 +61 +48 +58 +59 +91 +92 +89 +186 +157 +134 +245 +179 +138 +238 +159 +107 +236 +147 +85 +230 +128 +60 +234 +125 +52 +226 +110 +35 +223 +103 +18 +224 +98 +18 +230 +97 +5 +226 +93 +0 +226 +93 +0 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +226 +93 +0 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +230 +97 +5 +224 +98 +18 +236 +108 +29 +239 +117 +44 +230 +123 +57 +243 +141 +78 +238 +159 +107 +234 +168 +124 +158 +130 +108 +76 +78 +76 +41 +58 +57 +62 +63 +61 +95 +78 +64 +125 +90 +64 +146 +97 +64 +163 +104 +61 +173 +106 +60 +163 +104 +61 +155 +100 +63 +125 +90 +64 +95 +78 +64 +56 +64 +60 +43 +57 +62 +124 +111 +99 +209 +171 +139 +234 +168 +124 +238 +159 +107 +241 +145 +79 +230 +128 +60 +239 +117 +44 +236 +108 +29 +236 +102 +14 +229 +102 +7 +230 +97 +5 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +231 +91 +2 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +226 +93 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +230 +97 +5 +230 +97 +5 +224 +98 +18 +236 +108 +29 +226 +110 +35 +230 +123 +57 +231 +136 +72 +241 +153 +96 +238 +159 +107 +240 +181 +138 +203 +161 +131 +150 +125 +114 +101 +100 +92 +76 +78 +76 +55 +66 +67 +48 +58 +59 +48 +58 +59 +48 +58 +59 +48 +58 +59 +58 +69 +70 +84 +85 +82 +124 +111 +99 +178 +146 +122 +240 +181 +138 +234 +168 +124 +238 +159 +107 +236 +147 +85 +230 +128 +60 +234 +125 +52 +226 +110 +35 +223 +103 +18 +224 +98 +18 +230 +97 +5 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +230 +97 +5 +224 +98 +18 +223 +103 +18 +226 +110 +35 +225 +124 +48 +230 +128 +60 +236 +147 +85 +241 +153 +96 +234 +168 +124 +230 +173 +136 +186 +157 +134 +133 +120 +107 +91 +92 +89 +63 +74 +74 +51 +62 +63 +48 +58 +59 +48 +58 +59 +48 +58 +59 +51 +62 +63 +63 +74 +74 +91 +92 +89 +144 +125 +110 +203 +161 +131 +240 +181 +138 +245 +169 +119 +241 +153 +96 +241 +145 +79 +230 +128 +60 +225 +124 +48 +226 +110 +35 +223 +103 +18 +224 +98 +18 +230 +97 +5 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +230 +97 +5 +224 +98 +18 +223 +103 +18 +226 +110 +35 +239 +117 +44 +230 +123 +57 +231 +136 +72 +236 +147 +85 +238 +159 +107 +245 +169 +119 +234 +168 +124 +240 +181 +138 +239 +182 +144 +236 +186 +153 +250 +197 +158 +250 +197 +158 +250 +197 +158 +251 +192 +154 +236 +186 +153 +239 +182 +144 +245 +179 +138 +234 +168 +124 +238 +159 +107 +241 +153 +96 +231 +136 +72 +230 +128 +60 +225 +124 +48 +226 +110 +35 +223 +103 +18 +224 +98 +18 +230 +97 +5 +230 +97 +5 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +230 +97 +5 +224 +98 +18 +223 +103 +18 +226 +110 +35 +225 +124 +48 +230 +128 +60 +231 +136 +72 +241 +153 +96 +238 +159 +107 +234 +168 +124 +240 +181 +138 +239 +182 +144 +236 +186 +153 +251 +192 +154 +250 +197 +158 +250 +197 +158 +250 +197 +158 +236 +186 +153 +239 +182 +144 +240 +181 +138 +234 +168 +124 +245 +169 +119 +238 +159 +107 +236 +147 +85 +231 +136 +72 +230 +123 +57 +239 +117 +44 +226 +110 +35 +223 +103 +18 +224 +98 +18 +230 +97 +5 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +225 +92 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +220 +93 +11 +220 +93 +11 +224 +98 +18 +223 +103 +18 +226 +110 +35 +226 +110 +35 +225 +124 +48 +230 +128 +60 +231 +136 +72 +236 +147 +85 +241 +153 +96 +238 +159 +107 +238 +159 +107 +234 +168 +124 +234 +168 +124 +234 +168 +124 +234 +168 +124 +234 +168 +124 +238 +159 +107 +238 +159 +107 +241 +153 +96 +236 +147 +85 +231 +136 +72 +230 +128 +60 +230 +123 +57 +226 +110 +35 +226 +110 +35 +223 +103 +18 +224 +98 +18 +220 +93 +11 +220 +93 +11 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +220 +93 +11 +220 +93 +11 +224 +98 +18 +223 +103 +18 +226 +110 +35 +225 +124 +48 +230 +123 +57 +230 +128 +60 +231 +136 +72 +236 +147 +85 +241 +153 +96 +238 +159 +107 +238 +159 +107 +234 +168 +124 +234 +168 +124 +234 +168 +124 +234 +168 +124 +234 +168 +124 +238 +159 +107 +238 +159 +107 +241 +153 +96 +236 +147 +85 +231 +136 +72 +230 +128 +60 +225 +124 +48 +226 +110 +35 +226 +110 +35 +223 +103 +18 +224 +98 +18 +220 +93 +11 +220 +93 +11 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +220 +93 +11 +220 +93 +11 +220 +93 +11 +224 +98 +18 +223 +103 +18 +226 +110 +35 +226 +110 +35 +225 +124 +48 +230 +128 +60 +230 +128 +60 +231 +136 +72 +231 +136 +72 +236 +147 +85 +236 +147 +85 +236 +147 +85 +236 +147 +85 +236 +147 +85 +231 +136 +72 +231 +136 +72 +231 +136 +72 +230 +128 +60 +227 +126 +50 +225 +124 +48 +226 +110 +35 +223 +103 +18 +223 +103 +18 +224 +98 +18 +220 +93 +11 +220 +93 +11 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +218 +87 +5 +220 +93 +11 +220 +93 +11 +224 +98 +18 +223 +103 +18 +226 +110 +35 +226 +110 +35 +225 +124 +48 +230 +123 +57 +230 +128 +60 +231 +136 +72 +231 +136 +72 +231 +136 +72 +236 +147 +85 +236 +147 +85 +236 +147 +85 +236 +147 +85 +236 +147 +85 +231 +136 +72 +231 +136 +72 +230 +128 +60 +230 +123 +57 +225 +124 +48 +226 +110 +35 +226 +110 +35 +223 +103 +18 +224 +98 +18 +220 +93 +11 +220 +93 +11 +220 +93 +11 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +217 +86 +3 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +217 +86 +3 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +218 +87 +5 +218 +87 +5 +220 +93 +11 +220 +93 +11 +224 +98 +18 +223 +103 +18 +223 +103 +18 +226 +110 +35 +226 +110 +35 +225 +124 +48 +225 +124 +48 +225 +124 +48 +224 +123 +55 +224 +123 +55 +224 +123 +55 +230 +123 +57 +224 +123 +55 +224 +123 +55 +225 +124 +48 +225 +124 +48 +226 +110 +35 +226 +110 +35 +223 +103 +18 +223 +103 +18 +224 +98 +18 +220 +93 +11 +220 +93 +11 +218 +87 +5 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +221 +89 +0 +221 +89 +0 +217 +86 +3 +221 +89 +0 +221 +89 +0 +217 +86 +3 +221 +89 +0 +221 +89 +0 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +221 +89 +0 +221 +89 +0 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +217 +86 +3 +218 +87 +5 +218 +87 +5 +220 +93 +11 +220 +93 +11 +220 +93 +11 +224 +98 +18 +223 +103 +18 +226 +110 +35 +226 +110 +35 +226 +110 +35 +225 +124 +48 +225 +124 +48 +224 +123 +55 +230 +123 +57 +230 +123 +57 +230 +123 +57 +230 +123 +57 +230 +123 +57 +225 +124 +48 +225 +124 +48 +226 +110 +35 +226 +110 +35 +226 +110 +35 +223 +103 +18 +224 +98 +18 +224 +98 +18 +220 +93 +11 +220 +93 +11 +218 +87 +5 +218 +87 +5 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +221 +89 +0 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +218 +87 +5 +218 +87 +5 +218 +87 +5 +220 +93 +11 +220 +93 +11 +224 +98 +18 +224 +98 +18 +224 +98 +18 +223 +103 +18 +226 +110 +35 +226 +110 +35 +226 +110 +35 +226 +110 +35 +226 +110 +35 +226 +110 +35 +226 +110 +35 +226 +110 +35 +226 +110 +35 +223 +103 +18 +223 +103 +18 +224 +98 +18 +224 +98 +18 +220 +93 +11 +220 +93 +11 +218 +87 +5 +218 +87 +5 +218 +87 +5 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +220 +93 +11 +220 +93 +11 +224 +98 +18 +224 +98 +18 +223 +103 +18 +223 +103 +18 +226 +110 +35 +226 +110 +35 +226 +110 +35 +226 +110 +35 +226 +110 +35 +226 +110 +35 +226 +110 +35 +226 +110 +35 +226 +110 +35 +223 +103 +18 +224 +98 +18 +224 +98 +18 +220 +93 +11 +220 +93 +11 +220 +93 +11 +218 +87 +5 +218 +87 +5 +218 +87 +5 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +220 +93 +11 +220 +93 +11 +220 +93 +11 +220 +93 +11 +224 +98 +18 +224 +98 +18 +224 +98 +18 +224 +98 +18 +224 +98 +18 +224 +98 +18 +220 +93 +11 +224 +98 +18 +220 +93 +11 +220 +93 +11 +220 +93 +11 +218 +87 +5 +218 +87 +5 +218 +87 +5 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +218 +87 +5 +217 +86 +3 +218 +87 +5 +218 +87 +5 +218 +87 +5 +220 +93 +11 +220 +93 +11 +220 +93 +11 +220 +93 +11 +220 +93 +11 +224 +98 +18 +224 +98 +18 +224 +98 +18 +224 +98 +18 +224 +98 +18 +220 +93 +11 +220 +93 +11 +220 +93 +11 +220 +93 +11 +220 +93 +11 +218 +87 +5 +218 +87 +5 +218 +87 +5 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +218 +87 +5 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +217 +86 +3 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +217 +86 +3 +217 +86 +3 +217 +86 +3 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +217 +86 +3 +217 +86 +3 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +217 +86 +3 +217 +86 +3 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +217 +86 +3 +217 +86 +3 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +217 +86 +3 +217 +86 +3 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +217 +86 +3 +217 +86 +3 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +217 +86 +3 +217 +86 +3 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +217 +86 +3 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +217 +86 +3 +217 +86 +3 +214 +84 +0 +214 +84 +0 +214 +84 +0 +217 +86 +3 +217 +86 +3 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +217 +86 +3 +217 +86 +3 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 +214 +84 +0 diff --git a/meta/packages/linux/linux-omap-2.6.29/cache-display-fix.patch b/meta/packages/linux/linux-omap-2.6.29/cache-display-fix.patch new file mode 100644 index 000000000..019fd5acf --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/cache-display-fix.patch @@ -0,0 +1,238 @@ +On Tue, 2008-07-01 at 06:23 +0100, Dirk Behme wrote: +> Catalin Marinas wrote: +> > But, anyway, if you want a patch, Harry is updating it to a recent +> > kernel. +> +> Any news on this? I think there are some people wanting a patch ;) + +See below for a preliminary patch updated to 2.6.26-rc8. Note that I +don't plan to submit it in its current form but clean it up a bit first. + + +Show the cache type of ARMv7 CPUs + +From: Catalin Marinas + +Signed-off-by: Catalin Marinas +--- + + arch/arm/kernel/setup.c | 137 +++++++++++++++++++++++++++++++++++++++++++++- + include/asm-arm/system.h | 18 ++++++ + 2 files changed, 153 insertions(+), 2 deletions(-) + + +diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c +index 5ae0eb2..0cd238d 100644 +--- a/arch/arm/kernel/setup.c ++++ b/arch/arm/kernel/setup.c +@@ -256,6 +256,24 @@ static const char *proc_arch[] = { + "?(17)", + }; + ++static const char *v7_cache_policy[4] = { ++ "reserved", ++ "AVIVT", ++ "VIPT", ++ "PIPT", ++}; ++ ++static const char *v7_cache_type[8] = { ++ "none", ++ "instruction only", ++ "data only", ++ "separate instruction and data", ++ "unified", ++ "unknown type", ++ "unknown type", ++ "unknown type", ++}; ++ + #define CACHE_TYPE(x) (((x) >> 25) & 15) + #define CACHE_S(x) ((x) & (1 << 24)) + #define CACHE_DSIZE(x) (((x) >> 12) & 4095) /* only if S=1 */ +@@ -266,6 +284,22 @@ static const char *proc_arch[] = { + #define CACHE_M(y) ((y) & (1 << 2)) + #define CACHE_LINE(y) ((y) & 3) + ++#define CACHE_TYPE_V7(x) (((x) >> 14) & 3) ++#define CACHE_UNIFIED(x) ((((x) >> 27) & 7)+1) ++#define CACHE_COHERENT(x) ((((x) >> 24) & 7)+1) ++ ++#define CACHE_ID_LEVEL_MASK 7 ++#define CACHE_ID_LEVEL_BITS 3 ++ ++#define CACHE_LINE_V7(v) ((1 << (((v) & 7)+4))) ++#define CACHE_ASSOC_V7(v) ((((v) >> 3) & ((1<<10)-1))+1) ++#define CACHE_SETS_V7(v) ((((v) >> 13) & ((1<<15)-1))+1) ++#define CACHE_SIZE_V7(v) (CACHE_LINE_V7(v)*CACHE_ASSOC_V7(v)*CACHE_SETS_V7(v)) ++#define CACHE_WA_V7(v) (((v) & (1<<28)) != 0) ++#define CACHE_RA_V7(v) (((v) & (1<<29)) != 0) ++#define CACHE_WB_V7(v) (((v) & (1<<30)) != 0) ++#define CACHE_WT_V7(v) (((v) & (1<<31)) != 0) ++ + static inline void dump_cache(const char *prefix, int cpu, unsigned int cache) + { + unsigned int mult = 2 + (CACHE_M(cache) ? 1 : 0); +@@ -279,11 +313,57 @@ static inline void dump_cache(const char *prefix, int cpu, unsigned int cache) + CACHE_LINE(cache))); + } + ++static void dump_v7_cache(const char *type, int cpu, unsigned int level) ++{ ++ unsigned int cachesize; ++ ++ write_extended_cpuid(2,0,0,0,level); /* Set the cache size selection register */ ++ write_extended_cpuid(0,7,5,4,0); /* Prefetch flush to wait for above */ ++ cachesize = read_extended_cpuid(1,0,0,0); ++ ++ printk("CPU%u: %s cache: %d bytes, associativity %d, %d byte lines, %d sets,\n supports%s%s%s%s\n", ++ cpu, type, ++ CACHE_SIZE_V7(cachesize),CACHE_ASSOC_V7(cachesize), ++ CACHE_LINE_V7(cachesize),CACHE_SETS_V7(cachesize), ++ CACHE_WA_V7(cachesize) ? " WA" : "", ++ CACHE_RA_V7(cachesize) ? " RA" : "", ++ CACHE_WB_V7(cachesize) ? " WB" : "", ++ CACHE_WT_V7(cachesize) ? " WT" : ""); ++} ++ + static void __init dump_cpu_info(int cpu) + { + unsigned int info = read_cpuid(CPUID_CACHETYPE); + +- if (info != processor_id) { ++ if (info != processor_id && (info & (1 << 31))) { ++ /* ARMv7 style of cache info register */ ++ unsigned int id = read_extended_cpuid(1,0,0,1); ++ unsigned int level = 0; ++ printk("CPU%u: L1 I %s cache. Caches unified at level %u, coherent at level %u\n", ++ cpu, ++ v7_cache_policy[CACHE_TYPE_V7(info)], ++ CACHE_UNIFIED(id), ++ CACHE_COHERENT(id)); ++ ++ while (id & CACHE_ID_LEVEL_MASK) { ++ printk("CPU%u: Level %u cache is %s\n", ++ cpu, (level >> 1)+1, v7_cache_type[id & CACHE_ID_LEVEL_MASK]); ++ ++ if (id & 1) { ++ /* Dump I at this level */ ++ dump_v7_cache("I", cpu, level | 1); ++ } ++ ++ if (id & (4 | 2)) { ++ /* Dump D or unified at this level */ ++ dump_v7_cache((id & 4) ? "unified" : "D", cpu, level); ++ } ++ ++ /* Next level out */ ++ level += 2; ++ id >>= CACHE_ID_LEVEL_BITS; ++ } ++ } else if (info != processor_id) { + printk("CPU%u: D %s %s cache\n", cpu, cache_is_vivt() ? "VIVT" : "VIPT", + cache_types[CACHE_TYPE(info)]); + if (CACHE_S(info)) { +@@ -916,6 +996,30 @@ c_show_cache(struct seq_file *m, const char *type, unsigned int cache) + CACHE_LINE(cache))); + } + ++static void c_show_v7_cache(struct seq_file *m, const char *type, unsigned int levelselect) ++{ ++ unsigned int cachesize; ++ unsigned int level = (levelselect >> 1) + 1; ++ ++ write_extended_cpuid(2,0,0,0,levelselect); /* Set the cache size selection register */ ++ write_extended_cpuid(0,7,5,4,0); /* Prefetch flush to wait for above */ ++ cachesize = read_extended_cpuid(1,0,0,0); ++ ++ seq_printf(m, "L%u %s size\t\t: %d bytes\n" ++ "L%u %s assoc\t\t: %d\n" ++ "L%u %s line length\t: %d\n" ++ "L%u %s sets\t\t: %d\n" ++ "L%u %s supports\t\t:%s%s%s%s\n", ++ level, type, CACHE_SIZE_V7(cachesize), ++ level, type, CACHE_ASSOC_V7(cachesize), ++ level, type, CACHE_LINE_V7(cachesize), ++ level, type, CACHE_SETS_V7(cachesize), ++ level, type, CACHE_WA_V7(cachesize) ? " WA" : "", ++ CACHE_RA_V7(cachesize) ? " RA" : "", ++ CACHE_WB_V7(cachesize) ? " WB" : "", ++ CACHE_WT_V7(cachesize) ? " WT" : ""); ++} ++ + static int c_show(struct seq_file *m, void *v) + { + int i; +@@ -971,7 +1075,36 @@ static int c_show(struct seq_file *m, void *v) + + { + unsigned int cache_info = read_cpuid(CPUID_CACHETYPE); +- if (cache_info != processor_id) { ++ if (cache_info != processor_id && (cache_info & (1<<31))) { ++ /* V7 style of cache info register */ ++ unsigned int id = read_extended_cpuid(1,0,0,1); ++ unsigned int levelselect = 0; ++ seq_printf(m, "L1 I cache\t:%s\n" ++ "Cache unification level\t: %u\n" ++ "Cache coherency level\t: %u\n", ++ v7_cache_policy[CACHE_TYPE_V7(cache_info)], ++ CACHE_UNIFIED(id), ++ CACHE_COHERENT(id)); ++ ++ while (id & CACHE_ID_LEVEL_MASK) { ++ seq_printf(m, "Level %u cache\t\t: %s\n", ++ (levelselect >> 1)+1, v7_cache_type[id & CACHE_ID_LEVEL_MASK]); ++ ++ if (id & 1) { ++ /* Dump I at this level */ ++ c_show_v7_cache(m, "I", levelselect | 1); ++ } ++ ++ if (id & (4 | 2)) { ++ /* Dump D or unified at this level */ ++ c_show_v7_cache(m, (id & 4) ? "cache" : "D", levelselect); ++ } ++ ++ /* Next level out */ ++ levelselect += 2; ++ id >>= CACHE_ID_LEVEL_BITS; ++ } ++ } else if (cache_info != processor_id) { + seq_printf(m, "Cache type\t: %s\n" + "Cache clean\t: %s\n" + "Cache lockdown\t: %s\n" +diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h +index 514af79..704738e 100644 +--- a/arch/arm/include/asm/system.h ++++ b/arch/arm/include/asm/system.h +@@ -74,6 +74,24 @@ + : "cc"); \ + __val; \ + }) ++#define read_extended_cpuid(op1,op2,op3,op4) \ ++ ({ \ ++ unsigned int __val; \ ++ asm("mrc p15," __stringify(op1) ",%0,c" __stringify(op2)",c" __stringify(op3)"," __stringify(op4) \ ++ : "=r" (__val) \ ++ : \ ++ : "cc"); \ ++ __val; \ ++ }) ++ ++#define write_extended_cpuid(op1,op2,op3,op4,v) \ ++ ({ \ ++ unsigned int __val = v; \ ++ asm("mcr p15," __stringify(op1) ",%0,c" __stringify(op2)",c" __stringify(op3)"," __stringify(op4) \ ++ : \ ++ : "r" (__val) \ ++ : "cc"); \ ++ }) + #else + extern unsigned int processor_id; + #define read_cpuid(reg) (processor_id) + + +-- +Catalin + + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0001-Revert-gro-Fix-legacy-path-napi_complete-crash.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0001-Revert-gro-Fix-legacy-path-napi_complete-crash.patch new file mode 100644 index 000000000..aeab62f10 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0001-Revert-gro-Fix-legacy-path-napi_complete-crash.patch @@ -0,0 +1,39 @@ +From 26abf45ac80be4c54a63fecf1c3c1e1efb416e0a Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Wed, 1 Apr 2009 18:27:09 +0300 +Subject: [PATCH] Revert "gro: Fix legacy path napi_complete crash" + +This reverts commit 303c6a0251852ecbdc5c15e466dcaff5971f7517. + +Fixes USB network problems +--- + net/core/dev.c | 5 ++--- + 1 files changed, 2 insertions(+), 3 deletions(-) + +diff --git a/net/core/dev.c b/net/core/dev.c +index e3fe5c7..c1e9dc0 100644 +--- a/net/core/dev.c ++++ b/net/core/dev.c +@@ -2588,9 +2588,9 @@ static int process_backlog(struct napi_struct *napi, int quota) + local_irq_disable(); + skb = __skb_dequeue(&queue->input_pkt_queue); + if (!skb) { ++ __napi_complete(napi); + local_irq_enable(); +- napi_complete(napi); +- goto out; ++ break; + } + local_irq_enable(); + +@@ -2599,7 +2599,6 @@ static int process_backlog(struct napi_struct *napi, int quota) + + napi_gro_flush(napi); + +-out: + return work; + } + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0002-OMAPFB-move-omapfb.h-to-include-linux.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0002-OMAPFB-move-omapfb.h-to-include-linux.patch new file mode 100644 index 000000000..04ac6a9ce --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0002-OMAPFB-move-omapfb.h-to-include-linux.patch @@ -0,0 +1,1316 @@ +From 02243f13eec816e11d16676a131bc04b8a0666ab Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Wed, 11 Feb 2009 16:33:02 +0200 +Subject: [PATCH] OMAPFB: move omapfb.h to include/linux/ + +This is needed so that omapfb.h is automatically exported to user space. + +omapfb.h should be cleaned up later. Some stuff can probably be moved +to omapfb's private include file. + +Signed-off-by: Tomi Valkeinen +--- + arch/arm/mach-omap1/board-nokia770.c | 2 +- + arch/arm/mach-omap2/board-n800.c | 2 +- + arch/arm/mach-omap2/io.c | 2 +- + arch/arm/plat-omap/fb.c | 2 +- + arch/arm/plat-omap/include/mach/omapfb.h | 398 ------------------------------ + drivers/video/omap/blizzard.c | 2 +- + drivers/video/omap/dispc.c | 2 +- + drivers/video/omap/hwa742.c | 2 +- + drivers/video/omap/lcd_2430sdp.c | 2 +- + drivers/video/omap/lcd_ams_delta.c | 2 +- + drivers/video/omap/lcd_apollon.c | 2 +- + drivers/video/omap/lcd_h3.c | 2 +- + drivers/video/omap/lcd_h4.c | 3 +- + drivers/video/omap/lcd_inn1510.c | 2 +- + drivers/video/omap/lcd_inn1610.c | 2 +- + drivers/video/omap/lcd_ldp.c | 2 +- + drivers/video/omap/lcd_mipid.c | 2 +- + drivers/video/omap/lcd_omap2evm.c | 2 +- + drivers/video/omap/lcd_omap3beagle.c | 2 +- + drivers/video/omap/lcd_omap3evm.c | 2 +- + drivers/video/omap/lcd_osk.c | 2 +- + drivers/video/omap/lcd_overo.c | 2 +- + drivers/video/omap/lcd_p2.c | 2 +- + drivers/video/omap/lcd_palmte.c | 2 +- + drivers/video/omap/lcd_palmtt.c | 2 +- + drivers/video/omap/lcd_palmz71.c | 3 +- + drivers/video/omap/lcdc.c | 2 +- + drivers/video/omap/omapfb_main.c | 2 +- + drivers/video/omap/rfbi.c | 3 +- + drivers/video/omap/sossi.c | 2 +- + include/linux/omapfb.h | 398 ++++++++++++++++++++++++++++++ + 31 files changed, 427 insertions(+), 430 deletions(-) + delete mode 100644 arch/arm/plat-omap/include/mach/omapfb.h + create mode 100644 include/linux/omapfb.h + +diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c +index 8780ca6..ca4680a 100644 +--- a/arch/arm/mach-omap1/board-nokia770.c ++++ b/arch/arm/mach-omap1/board-nokia770.c +@@ -18,6 +18,7 @@ + #include + #include + #include ++#include + #include + + #include +@@ -32,7 +33,6 @@ + #include + #include + #include +-#include + #include + #include + #include +diff --git a/arch/arm/mach-omap2/board-n800.c b/arch/arm/mach-omap2/board-n800.c +index cb32b61..f6f6571 100644 +--- a/arch/arm/mach-omap2/board-n800.c ++++ b/arch/arm/mach-omap2/board-n800.c +@@ -27,6 +27,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -39,7 +40,6 @@ + #include + #include + #include +-#include + #include + + #include <../drivers/cbus/tahvo.h> +diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c +index adbe21f..a04e3ee 100644 +--- a/arch/arm/mach-omap2/io.c ++++ b/arch/arm/mach-omap2/io.c +@@ -18,13 +18,13 @@ + #include + #include + #include ++#include + #include + + #include + + #include + #include +-#include + #include + #include + #include +diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c +index 3746222..40615a6 100644 +--- a/arch/arm/plat-omap/fb.c ++++ b/arch/arm/plat-omap/fb.c +@@ -28,13 +28,13 @@ + #include + #include + #include ++#include + + #include + #include + + #include + #include +-#include + + #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) + +diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h +deleted file mode 100644 +index b226bdf..0000000 +--- a/arch/arm/plat-omap/include/mach/omapfb.h ++++ /dev/null +@@ -1,398 +0,0 @@ +-/* +- * File: arch/arm/plat-omap/include/mach/omapfb.h +- * +- * Framebuffer driver for TI OMAP boards +- * +- * Copyright (C) 2004 Nokia Corporation +- * Author: Imre Deak +- * +- * This program is free software; you can redistribute it and/or modify it +- * under the terms of the GNU General Public License as published by the +- * Free Software Foundation; either version 2 of the License, or (at your +- * option) any later version. +- * +- * This program is distributed in the hope that it will be useful, but +- * WITHOUT ANY WARRANTY; without even the implied warranty of +- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +- * General Public License for more details. +- * +- * You should have received a copy of the GNU General Public License along +- * with this program; if not, write to the Free Software Foundation, Inc., +- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +- */ +- +-#ifndef __OMAPFB_H +-#define __OMAPFB_H +- +-#include +-#include +- +-/* IOCTL commands. */ +- +-#define OMAP_IOW(num, dtype) _IOW('O', num, dtype) +-#define OMAP_IOR(num, dtype) _IOR('O', num, dtype) +-#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) +-#define OMAP_IO(num) _IO('O', num) +- +-#define OMAPFB_MIRROR OMAP_IOW(31, int) +-#define OMAPFB_SYNC_GFX OMAP_IO(37) +-#define OMAPFB_VSYNC OMAP_IO(38) +-#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) +-#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) +-#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) +-#define OMAPFB_LCD_TEST OMAP_IOW(45, int) +-#define OMAPFB_CTRL_TEST OMAP_IOW(46, int) +-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) +-#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) +-#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) +-#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) +-#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) +-#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) +-#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) +-#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) +- +-#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff +-#define OMAPFB_CAPS_LCDC_MASK 0x00fff000 +-#define OMAPFB_CAPS_PANEL_MASK 0xff000000 +- +-#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 +-#define OMAPFB_CAPS_TEARSYNC 0x00002000 +-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 +-#define OMAPFB_CAPS_PLANE_SCALE 0x00008000 +-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 +-#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 +-#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 +-#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 +-#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 +- +-/* Values from DSP must map to lower 16-bits */ +-#define OMAPFB_FORMAT_MASK 0x00ff +-#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 +-#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 +-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 +-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 +-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 +- +-#define OMAPFB_EVENT_READY 1 +-#define OMAPFB_EVENT_DISABLED 2 +- +-#define OMAPFB_MEMTYPE_SDRAM 0 +-#define OMAPFB_MEMTYPE_SRAM 1 +-#define OMAPFB_MEMTYPE_MAX 1 +- +-enum omapfb_color_format { +- OMAPFB_COLOR_RGB565 = 0, +- OMAPFB_COLOR_YUV422, +- OMAPFB_COLOR_YUV420, +- OMAPFB_COLOR_CLUT_8BPP, +- OMAPFB_COLOR_CLUT_4BPP, +- OMAPFB_COLOR_CLUT_2BPP, +- OMAPFB_COLOR_CLUT_1BPP, +- OMAPFB_COLOR_RGB444, +- OMAPFB_COLOR_YUY422, +-}; +- +-struct omapfb_update_window { +- __u32 x, y; +- __u32 width, height; +- __u32 format; +- __u32 out_x, out_y; +- __u32 out_width, out_height; +- __u32 reserved[8]; +-}; +- +-struct omapfb_update_window_old { +- __u32 x, y; +- __u32 width, height; +- __u32 format; +-}; +- +-enum omapfb_plane { +- OMAPFB_PLANE_GFX = 0, +- OMAPFB_PLANE_VID1, +- OMAPFB_PLANE_VID2, +-}; +- +-enum omapfb_channel_out { +- OMAPFB_CHANNEL_OUT_LCD = 0, +- OMAPFB_CHANNEL_OUT_DIGIT, +-}; +- +-struct omapfb_plane_info { +- __u32 pos_x; +- __u32 pos_y; +- __u8 enabled; +- __u8 channel_out; +- __u8 mirror; +- __u8 reserved1; +- __u32 out_width; +- __u32 out_height; +- __u32 reserved2[12]; +-}; +- +-struct omapfb_mem_info { +- __u32 size; +- __u8 type; +- __u8 reserved[3]; +-}; +- +-struct omapfb_caps { +- __u32 ctrl; +- __u32 plane_color; +- __u32 wnd_color; +-}; +- +-enum omapfb_color_key_type { +- OMAPFB_COLOR_KEY_DISABLED = 0, +- OMAPFB_COLOR_KEY_GFX_DST, +- OMAPFB_COLOR_KEY_VID_SRC, +-}; +- +-struct omapfb_color_key { +- __u8 channel_out; +- __u32 background; +- __u32 trans_key; +- __u8 key_type; +-}; +- +-enum omapfb_update_mode { +- OMAPFB_UPDATE_DISABLED = 0, +- OMAPFB_AUTO_UPDATE, +- OMAPFB_MANUAL_UPDATE +-}; +- +-#ifdef __KERNEL__ +- +-#include +-#include +-#include +-#include +- +-#include +- +-#define OMAP_LCDC_INV_VSYNC 0x0001 +-#define OMAP_LCDC_INV_HSYNC 0x0002 +-#define OMAP_LCDC_INV_PIX_CLOCK 0x0004 +-#define OMAP_LCDC_INV_OUTPUT_EN 0x0008 +-#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010 +-#define OMAP_LCDC_HSVS_OPPOSITE 0x0020 +- +-#define OMAP_LCDC_SIGNAL_MASK 0x003f +- +-#define OMAP_LCDC_PANEL_TFT 0x0100 +- +-#define OMAPFB_PLANE_XRES_MIN 8 +-#define OMAPFB_PLANE_YRES_MIN 8 +- +-#ifdef CONFIG_ARCH_OMAP1 +-#define OMAPFB_PLANE_NUM 1 +-#else +-#define OMAPFB_PLANE_NUM 3 +-#endif +- +-struct omapfb_device; +- +-struct lcd_panel { +- const char *name; +- int config; /* TFT/STN, signal inversion */ +- int bpp; /* Pixel format in fb mem */ +- int data_lines; /* Lines on LCD HW interface */ +- +- int x_res, y_res; +- int pixel_clock; /* In kHz */ +- int hsw; /* Horizontal synchronization +- pulse width */ +- int hfp; /* Horizontal front porch */ +- int hbp; /* Horizontal back porch */ +- int vsw; /* Vertical synchronization +- pulse width */ +- int vfp; /* Vertical front porch */ +- int vbp; /* Vertical back porch */ +- int acb; /* ac-bias pin frequency */ +- int pcd; /* pixel clock divider. +- Obsolete use pixel_clock instead */ +- +- int (*init) (struct lcd_panel *panel, +- struct omapfb_device *fbdev); +- void (*cleanup) (struct lcd_panel *panel); +- int (*enable) (struct lcd_panel *panel); +- void (*disable) (struct lcd_panel *panel); +- unsigned long (*get_caps) (struct lcd_panel *panel); +- int (*set_bklight_level)(struct lcd_panel *panel, +- unsigned int level); +- unsigned int (*get_bklight_level)(struct lcd_panel *panel); +- unsigned int (*get_bklight_max) (struct lcd_panel *panel); +- int (*run_test) (struct lcd_panel *panel, int test_num); +-}; +- +-struct extif_timings { +- int cs_on_time; +- int cs_off_time; +- int we_on_time; +- int we_off_time; +- int re_on_time; +- int re_off_time; +- int we_cycle_time; +- int re_cycle_time; +- int cs_pulse_width; +- int access_time; +- +- int clk_div; +- +- u32 tim[5]; /* set by extif->convert_timings */ +- +- int converted; +-}; +- +-struct lcd_ctrl_extif { +- int (*init) (struct omapfb_device *fbdev); +- void (*cleanup) (void); +- void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div); +- unsigned long (*get_max_tx_rate)(void); +- int (*convert_timings) (struct extif_timings *timings); +- void (*set_timings) (const struct extif_timings *timings); +- void (*set_bits_per_cycle)(int bpc); +- void (*write_command) (const void *buf, unsigned int len); +- void (*read_data) (void *buf, unsigned int len); +- void (*write_data) (const void *buf, unsigned int len); +- void (*transfer_area) (int width, int height, +- void (callback)(void * data), void *data); +- int (*setup_tearsync) (unsigned pin_cnt, +- unsigned hs_pulse_time, unsigned vs_pulse_time, +- int hs_pol_inv, int vs_pol_inv, int div); +- int (*enable_tearsync) (int enable, unsigned line); +- +- unsigned long max_transmit_size; +-}; +- +-struct omapfb_notifier_block { +- struct notifier_block nb; +- void *data; +- int plane_idx; +-}; +- +-typedef int (*omapfb_notifier_callback_t)(struct notifier_block *, +- unsigned long event, +- void *fbi); +- +-struct omapfb_mem_region { +- u32 paddr; +- void __iomem *vaddr; +- unsigned long size; +- u8 type; /* OMAPFB_PLANE_MEM_* */ +- unsigned alloc:1; /* allocated by the driver */ +- unsigned map:1; /* kernel mapped by the driver */ +-}; +- +-struct omapfb_mem_desc { +- int region_cnt; +- struct omapfb_mem_region region[OMAPFB_PLANE_NUM]; +-}; +- +-struct lcd_ctrl { +- const char *name; +- void *data; +- +- int (*init) (struct omapfb_device *fbdev, +- int ext_mode, +- struct omapfb_mem_desc *req_md); +- void (*cleanup) (void); +- void (*bind_client) (struct omapfb_notifier_block *nb); +- void (*get_caps) (int plane, struct omapfb_caps *caps); +- int (*set_update_mode)(enum omapfb_update_mode mode); +- enum omapfb_update_mode (*get_update_mode)(void); +- int (*setup_plane) (int plane, int channel_out, +- unsigned long offset, +- int screen_width, +- int pos_x, int pos_y, int width, +- int height, int color_mode); +- int (*set_rotate) (int angle); +- int (*setup_mem) (int plane, size_t size, +- int mem_type, unsigned long *paddr); +- int (*mmap) (struct fb_info *info, +- struct vm_area_struct *vma); +- int (*set_scale) (int plane, +- int orig_width, int orig_height, +- int out_width, int out_height); +- int (*enable_plane) (int plane, int enable); +- int (*update_window) (struct fb_info *fbi, +- struct omapfb_update_window *win, +- void (*callback)(void *), +- void *callback_data); +- void (*sync) (void); +- void (*suspend) (void); +- void (*resume) (void); +- int (*run_test) (int test_num); +- int (*setcolreg) (u_int regno, u16 red, u16 green, +- u16 blue, u16 transp, +- int update_hw_mem); +- int (*set_color_key) (struct omapfb_color_key *ck); +- int (*get_color_key) (struct omapfb_color_key *ck); +-}; +- +-enum omapfb_state { +- OMAPFB_DISABLED = 0, +- OMAPFB_SUSPENDED= 99, +- OMAPFB_ACTIVE = 100 +-}; +- +-struct omapfb_plane_struct { +- int idx; +- struct omapfb_plane_info info; +- enum omapfb_color_format color_mode; +- struct omapfb_device *fbdev; +-}; +- +-struct omapfb_device { +- int state; +- int ext_lcdc; /* Using external +- LCD controller */ +- struct mutex rqueue_mutex; +- +- int palette_size; +- u32 pseudo_palette[17]; +- +- struct lcd_panel *panel; /* LCD panel */ +- const struct lcd_ctrl *ctrl; /* LCD controller */ +- const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */ +- struct lcd_ctrl_extif *ext_if; /* LCD ctrl external +- interface */ +- struct device *dev; +- struct fb_var_screeninfo new_var; /* for mode changes */ +- +- struct omapfb_mem_desc mem_desc; +- struct fb_info *fb_info[OMAPFB_PLANE_NUM]; +-}; +- +-struct omapfb_platform_data { +- struct omap_lcd_config lcd; +- struct omapfb_mem_desc mem_desc; +- void *ctrl_platform_data; +-}; +- +-#ifdef CONFIG_ARCH_OMAP1 +-extern struct lcd_ctrl omap1_lcd_ctrl; +-#else +-extern struct lcd_ctrl omap2_disp_ctrl; +-#endif +- +-extern void omapfb_reserve_sdram(void); +-extern void omapfb_register_panel(struct lcd_panel *panel); +-extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); +-extern void omapfb_notify_clients(struct omapfb_device *fbdev, +- unsigned long event); +-extern int omapfb_register_client(struct omapfb_notifier_block *nb, +- omapfb_notifier_callback_t callback, +- void *callback_data); +-extern int omapfb_unregister_client(struct omapfb_notifier_block *nb); +-extern int omapfb_update_window_async(struct fb_info *fbi, +- struct omapfb_update_window *win, +- void (*callback)(void *), +- void *callback_data); +- +-/* in arch/arm/plat-omap/fb.c */ +-extern void omapfb_set_ctrl_platform_data(void *pdata); +- +-#endif /* __KERNEL__ */ +- +-#endif /* __OMAPFB_H */ +diff --git a/drivers/video/omap/blizzard.c b/drivers/video/omap/blizzard.c +index f60a233..8121c09 100644 +--- a/drivers/video/omap/blizzard.c ++++ b/drivers/video/omap/blizzard.c +@@ -25,9 +25,9 @@ + #include + #include + #include ++#include + + #include +-#include + #include + + #include "dispc.h" +diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c +index c140c21..1915af5 100644 +--- a/drivers/video/omap/dispc.c ++++ b/drivers/video/omap/dispc.c +@@ -24,9 +24,9 @@ + #include + #include + #include ++#include + + #include +-#include + #include + + #include "dispc.h" +diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c +index f24df0b..9b4c506 100644 +--- a/drivers/video/omap/hwa742.c ++++ b/drivers/video/omap/hwa742.c +@@ -25,9 +25,9 @@ + #include + #include + #include ++#include + + #include +-#include + #include + + #define HWA742_REV_CODE_REG 0x0 +diff --git a/drivers/video/omap/lcd_2430sdp.c b/drivers/video/omap/lcd_2430sdp.c +index a22b452..1252cc3 100644 +--- a/drivers/video/omap/lcd_2430sdp.c ++++ b/drivers/video/omap/lcd_2430sdp.c +@@ -26,9 +26,9 @@ + #include + #include + #include ++#include + + #include +-#include + #include + + #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 +diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c +index 3fd5342..4d54725 100644 +--- a/drivers/video/omap/lcd_ams_delta.c ++++ b/drivers/video/omap/lcd_ams_delta.c +@@ -24,13 +24,13 @@ + + #include + #include ++#include + + #include + #include + + #include + #include +-#include + + #define AMS_DELTA_DEFAULT_CONTRAST 112 + +diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c +index beae5d9..e3b2224 100644 +--- a/drivers/video/omap/lcd_apollon.c ++++ b/drivers/video/omap/lcd_apollon.c +@@ -23,10 +23,10 @@ + + #include + #include ++#include + + #include + #include +-#include + + /* #define USE_35INCH_LCD 1 */ + +diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c +index 2486237..f7264ea 100644 +--- a/drivers/video/omap/lcd_h3.c ++++ b/drivers/video/omap/lcd_h3.c +@@ -22,9 +22,9 @@ + #include + #include + #include ++#include + + #include +-#include + + #define MODULE_NAME "omapfb-lcd_h3" + +diff --git a/drivers/video/omap/lcd_h4.c b/drivers/video/omap/lcd_h4.c +index 6ff5643..d72df0c 100644 +--- a/drivers/video/omap/lcd_h4.c ++++ b/drivers/video/omap/lcd_h4.c +@@ -21,8 +21,7 @@ + + #include + #include +- +-#include ++#include + + static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) + { +diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c +index 6953ed4..f6e05d7 100644 +--- a/drivers/video/omap/lcd_inn1510.c ++++ b/drivers/video/omap/lcd_inn1510.c +@@ -22,9 +22,9 @@ + #include + #include + #include ++#include + + #include +-#include + + static int innovator1510_panel_init(struct lcd_panel *panel, + struct omapfb_device *fbdev) +diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c +index 4c4f7ee..c599e41 100644 +--- a/drivers/video/omap/lcd_inn1610.c ++++ b/drivers/video/omap/lcd_inn1610.c +@@ -21,9 +21,9 @@ + + #include + #include ++#include + + #include +-#include + + #define MODULE_NAME "omapfb-lcd_h3" + +diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c +index 8925230..1c25186 100644 +--- a/drivers/video/omap/lcd_ldp.c ++++ b/drivers/video/omap/lcd_ldp.c +@@ -25,10 +25,10 @@ + #include + #include + #include ++#include + + #include + #include +-#include + #include + + #define LCD_PANEL_BACKLIGHT_GPIO (15 + OMAP_MAX_GPIO_LINES) +diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c +index 1895997..4b28005 100644 +--- a/drivers/video/omap/lcd_mipid.c ++++ b/drivers/video/omap/lcd_mipid.c +@@ -22,8 +22,8 @@ + #include + #include + #include ++#include + +-#include + #include + + #include "../../cbus/tahvo.h" +diff --git a/drivers/video/omap/lcd_omap2evm.c b/drivers/video/omap/lcd_omap2evm.c +index 2fc46c2..1908a2b 100644 +--- a/drivers/video/omap/lcd_omap2evm.c ++++ b/drivers/video/omap/lcd_omap2evm.c +@@ -25,9 +25,9 @@ + #include + #include + #include ++#include + + #include +-#include + #include + + #define LCD_PANEL_ENABLE_GPIO 154 +diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c +index eae43e4..6be117e 100644 +--- a/drivers/video/omap/lcd_omap3beagle.c ++++ b/drivers/video/omap/lcd_omap3beagle.c +@@ -24,9 +24,9 @@ + #include + #include + #include ++#include + + #include +-#include + #include + + #define LCD_PANEL_ENABLE_GPIO 170 +diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c +index 1c3d814..10ba48c 100644 +--- a/drivers/video/omap/lcd_omap3evm.c ++++ b/drivers/video/omap/lcd_omap3evm.c +@@ -24,9 +24,9 @@ + #include + #include + #include ++#include + + #include +-#include + #include + + #define LCD_PANEL_ENABLE_GPIO 153 +diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c +index 379c96d..d6b193e 100644 +--- a/drivers/video/omap/lcd_osk.c ++++ b/drivers/video/omap/lcd_osk.c +@@ -22,10 +22,10 @@ + + #include + #include ++#include + + #include + #include +-#include + + static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) + { +diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c +index 2bc5c92..40c2026 100644 +--- a/drivers/video/omap/lcd_overo.c ++++ b/drivers/video/omap/lcd_overo.c +@@ -22,10 +22,10 @@ + #include + #include + #include ++#include + + #include + #include +-#include + #include + + #define LCD_ENABLE 144 +diff --git a/drivers/video/omap/lcd_p2.c b/drivers/video/omap/lcd_p2.c +index dd40fd7..bc5abef 100644 +--- a/drivers/video/omap/lcd_p2.c ++++ b/drivers/video/omap/lcd_p2.c +@@ -24,10 +24,10 @@ + #include + #include + #include ++#include + + #include + #include +-#include + + /* + * File: epson-md-tft.h +diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/omap/lcd_palmte.c +index 2183173..dcb456c 100644 +--- a/drivers/video/omap/lcd_palmte.c ++++ b/drivers/video/omap/lcd_palmte.c +@@ -22,9 +22,9 @@ + #include + #include + #include ++#include + + #include +-#include + + static int palmte_panel_init(struct lcd_panel *panel, + struct omapfb_device *fbdev) +diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c +index 57b0f6c..e8adab8 100644 +--- a/drivers/video/omap/lcd_palmtt.c ++++ b/drivers/video/omap/lcd_palmtt.c +@@ -28,9 +28,9 @@ GPIO13 - screen blanking + #include + #include + #include ++#include + + #include +-#include + + static int palmtt_panel_init(struct lcd_panel *panel, + struct omapfb_device *fbdev) +diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/omap/lcd_palmz71.c +index d33d78b..d5b3f82 100644 +--- a/drivers/video/omap/lcd_palmz71.c ++++ b/drivers/video/omap/lcd_palmz71.c +@@ -23,8 +23,7 @@ + #include + #include + #include +- +-#include ++#include + + static int palmz71_panel_init(struct lcd_panel *panel, + struct omapfb_device *fbdev) +diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c +index ab39492..633e33c 100644 +--- a/drivers/video/omap/lcdc.c ++++ b/drivers/video/omap/lcdc.c +@@ -28,9 +28,9 @@ + #include + #include + #include ++#include + + #include +-#include + + #include + +diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c +index 3bb4247..c6306af 100644 +--- a/drivers/video/omap/omapfb_main.c ++++ b/drivers/video/omap/omapfb_main.c +@@ -27,9 +27,9 @@ + #include + #include + #include ++#include + + #include +-#include + + #include "lcdc.h" + #include "dispc.h" +diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c +index 29fa368..118cfa9 100644 +--- a/drivers/video/omap/rfbi.c ++++ b/drivers/video/omap/rfbi.c +@@ -26,8 +26,7 @@ + #include + #include + #include +- +-#include ++#include + + #include "dispc.h" + +diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c +index cc697cc..ff9dd71 100644 +--- a/drivers/video/omap/sossi.c ++++ b/drivers/video/omap/sossi.c +@@ -23,9 +23,9 @@ + #include + #include + #include ++#include + + #include +-#include + + #include "lcdc.h" + +diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h +new file mode 100644 +index 0000000..b226bdf +--- /dev/null ++++ b/include/linux/omapfb.h +@@ -0,0 +1,398 @@ ++/* ++ * File: arch/arm/plat-omap/include/mach/omapfb.h ++ * ++ * Framebuffer driver for TI OMAP boards ++ * ++ * Copyright (C) 2004 Nokia Corporation ++ * Author: Imre Deak ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#ifndef __OMAPFB_H ++#define __OMAPFB_H ++ ++#include ++#include ++ ++/* IOCTL commands. */ ++ ++#define OMAP_IOW(num, dtype) _IOW('O', num, dtype) ++#define OMAP_IOR(num, dtype) _IOR('O', num, dtype) ++#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) ++#define OMAP_IO(num) _IO('O', num) ++ ++#define OMAPFB_MIRROR OMAP_IOW(31, int) ++#define OMAPFB_SYNC_GFX OMAP_IO(37) ++#define OMAPFB_VSYNC OMAP_IO(38) ++#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) ++#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) ++#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) ++#define OMAPFB_LCD_TEST OMAP_IOW(45, int) ++#define OMAPFB_CTRL_TEST OMAP_IOW(46, int) ++#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) ++#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) ++#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) ++#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) ++#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) ++#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) ++#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) ++#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) ++ ++#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff ++#define OMAPFB_CAPS_LCDC_MASK 0x00fff000 ++#define OMAPFB_CAPS_PANEL_MASK 0xff000000 ++ ++#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 ++#define OMAPFB_CAPS_TEARSYNC 0x00002000 ++#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 ++#define OMAPFB_CAPS_PLANE_SCALE 0x00008000 ++#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 ++#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 ++#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 ++#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 ++#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 ++ ++/* Values from DSP must map to lower 16-bits */ ++#define OMAPFB_FORMAT_MASK 0x00ff ++#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 ++#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 ++#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 ++#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 ++#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 ++ ++#define OMAPFB_EVENT_READY 1 ++#define OMAPFB_EVENT_DISABLED 2 ++ ++#define OMAPFB_MEMTYPE_SDRAM 0 ++#define OMAPFB_MEMTYPE_SRAM 1 ++#define OMAPFB_MEMTYPE_MAX 1 ++ ++enum omapfb_color_format { ++ OMAPFB_COLOR_RGB565 = 0, ++ OMAPFB_COLOR_YUV422, ++ OMAPFB_COLOR_YUV420, ++ OMAPFB_COLOR_CLUT_8BPP, ++ OMAPFB_COLOR_CLUT_4BPP, ++ OMAPFB_COLOR_CLUT_2BPP, ++ OMAPFB_COLOR_CLUT_1BPP, ++ OMAPFB_COLOR_RGB444, ++ OMAPFB_COLOR_YUY422, ++}; ++ ++struct omapfb_update_window { ++ __u32 x, y; ++ __u32 width, height; ++ __u32 format; ++ __u32 out_x, out_y; ++ __u32 out_width, out_height; ++ __u32 reserved[8]; ++}; ++ ++struct omapfb_update_window_old { ++ __u32 x, y; ++ __u32 width, height; ++ __u32 format; ++}; ++ ++enum omapfb_plane { ++ OMAPFB_PLANE_GFX = 0, ++ OMAPFB_PLANE_VID1, ++ OMAPFB_PLANE_VID2, ++}; ++ ++enum omapfb_channel_out { ++ OMAPFB_CHANNEL_OUT_LCD = 0, ++ OMAPFB_CHANNEL_OUT_DIGIT, ++}; ++ ++struct omapfb_plane_info { ++ __u32 pos_x; ++ __u32 pos_y; ++ __u8 enabled; ++ __u8 channel_out; ++ __u8 mirror; ++ __u8 reserved1; ++ __u32 out_width; ++ __u32 out_height; ++ __u32 reserved2[12]; ++}; ++ ++struct omapfb_mem_info { ++ __u32 size; ++ __u8 type; ++ __u8 reserved[3]; ++}; ++ ++struct omapfb_caps { ++ __u32 ctrl; ++ __u32 plane_color; ++ __u32 wnd_color; ++}; ++ ++enum omapfb_color_key_type { ++ OMAPFB_COLOR_KEY_DISABLED = 0, ++ OMAPFB_COLOR_KEY_GFX_DST, ++ OMAPFB_COLOR_KEY_VID_SRC, ++}; ++ ++struct omapfb_color_key { ++ __u8 channel_out; ++ __u32 background; ++ __u32 trans_key; ++ __u8 key_type; ++}; ++ ++enum omapfb_update_mode { ++ OMAPFB_UPDATE_DISABLED = 0, ++ OMAPFB_AUTO_UPDATE, ++ OMAPFB_MANUAL_UPDATE ++}; ++ ++#ifdef __KERNEL__ ++ ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define OMAP_LCDC_INV_VSYNC 0x0001 ++#define OMAP_LCDC_INV_HSYNC 0x0002 ++#define OMAP_LCDC_INV_PIX_CLOCK 0x0004 ++#define OMAP_LCDC_INV_OUTPUT_EN 0x0008 ++#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010 ++#define OMAP_LCDC_HSVS_OPPOSITE 0x0020 ++ ++#define OMAP_LCDC_SIGNAL_MASK 0x003f ++ ++#define OMAP_LCDC_PANEL_TFT 0x0100 ++ ++#define OMAPFB_PLANE_XRES_MIN 8 ++#define OMAPFB_PLANE_YRES_MIN 8 ++ ++#ifdef CONFIG_ARCH_OMAP1 ++#define OMAPFB_PLANE_NUM 1 ++#else ++#define OMAPFB_PLANE_NUM 3 ++#endif ++ ++struct omapfb_device; ++ ++struct lcd_panel { ++ const char *name; ++ int config; /* TFT/STN, signal inversion */ ++ int bpp; /* Pixel format in fb mem */ ++ int data_lines; /* Lines on LCD HW interface */ ++ ++ int x_res, y_res; ++ int pixel_clock; /* In kHz */ ++ int hsw; /* Horizontal synchronization ++ pulse width */ ++ int hfp; /* Horizontal front porch */ ++ int hbp; /* Horizontal back porch */ ++ int vsw; /* Vertical synchronization ++ pulse width */ ++ int vfp; /* Vertical front porch */ ++ int vbp; /* Vertical back porch */ ++ int acb; /* ac-bias pin frequency */ ++ int pcd; /* pixel clock divider. ++ Obsolete use pixel_clock instead */ ++ ++ int (*init) (struct lcd_panel *panel, ++ struct omapfb_device *fbdev); ++ void (*cleanup) (struct lcd_panel *panel); ++ int (*enable) (struct lcd_panel *panel); ++ void (*disable) (struct lcd_panel *panel); ++ unsigned long (*get_caps) (struct lcd_panel *panel); ++ int (*set_bklight_level)(struct lcd_panel *panel, ++ unsigned int level); ++ unsigned int (*get_bklight_level)(struct lcd_panel *panel); ++ unsigned int (*get_bklight_max) (struct lcd_panel *panel); ++ int (*run_test) (struct lcd_panel *panel, int test_num); ++}; ++ ++struct extif_timings { ++ int cs_on_time; ++ int cs_off_time; ++ int we_on_time; ++ int we_off_time; ++ int re_on_time; ++ int re_off_time; ++ int we_cycle_time; ++ int re_cycle_time; ++ int cs_pulse_width; ++ int access_time; ++ ++ int clk_div; ++ ++ u32 tim[5]; /* set by extif->convert_timings */ ++ ++ int converted; ++}; ++ ++struct lcd_ctrl_extif { ++ int (*init) (struct omapfb_device *fbdev); ++ void (*cleanup) (void); ++ void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div); ++ unsigned long (*get_max_tx_rate)(void); ++ int (*convert_timings) (struct extif_timings *timings); ++ void (*set_timings) (const struct extif_timings *timings); ++ void (*set_bits_per_cycle)(int bpc); ++ void (*write_command) (const void *buf, unsigned int len); ++ void (*read_data) (void *buf, unsigned int len); ++ void (*write_data) (const void *buf, unsigned int len); ++ void (*transfer_area) (int width, int height, ++ void (callback)(void * data), void *data); ++ int (*setup_tearsync) (unsigned pin_cnt, ++ unsigned hs_pulse_time, unsigned vs_pulse_time, ++ int hs_pol_inv, int vs_pol_inv, int div); ++ int (*enable_tearsync) (int enable, unsigned line); ++ ++ unsigned long max_transmit_size; ++}; ++ ++struct omapfb_notifier_block { ++ struct notifier_block nb; ++ void *data; ++ int plane_idx; ++}; ++ ++typedef int (*omapfb_notifier_callback_t)(struct notifier_block *, ++ unsigned long event, ++ void *fbi); ++ ++struct omapfb_mem_region { ++ u32 paddr; ++ void __iomem *vaddr; ++ unsigned long size; ++ u8 type; /* OMAPFB_PLANE_MEM_* */ ++ unsigned alloc:1; /* allocated by the driver */ ++ unsigned map:1; /* kernel mapped by the driver */ ++}; ++ ++struct omapfb_mem_desc { ++ int region_cnt; ++ struct omapfb_mem_region region[OMAPFB_PLANE_NUM]; ++}; ++ ++struct lcd_ctrl { ++ const char *name; ++ void *data; ++ ++ int (*init) (struct omapfb_device *fbdev, ++ int ext_mode, ++ struct omapfb_mem_desc *req_md); ++ void (*cleanup) (void); ++ void (*bind_client) (struct omapfb_notifier_block *nb); ++ void (*get_caps) (int plane, struct omapfb_caps *caps); ++ int (*set_update_mode)(enum omapfb_update_mode mode); ++ enum omapfb_update_mode (*get_update_mode)(void); ++ int (*setup_plane) (int plane, int channel_out, ++ unsigned long offset, ++ int screen_width, ++ int pos_x, int pos_y, int width, ++ int height, int color_mode); ++ int (*set_rotate) (int angle); ++ int (*setup_mem) (int plane, size_t size, ++ int mem_type, unsigned long *paddr); ++ int (*mmap) (struct fb_info *info, ++ struct vm_area_struct *vma); ++ int (*set_scale) (int plane, ++ int orig_width, int orig_height, ++ int out_width, int out_height); ++ int (*enable_plane) (int plane, int enable); ++ int (*update_window) (struct fb_info *fbi, ++ struct omapfb_update_window *win, ++ void (*callback)(void *), ++ void *callback_data); ++ void (*sync) (void); ++ void (*suspend) (void); ++ void (*resume) (void); ++ int (*run_test) (int test_num); ++ int (*setcolreg) (u_int regno, u16 red, u16 green, ++ u16 blue, u16 transp, ++ int update_hw_mem); ++ int (*set_color_key) (struct omapfb_color_key *ck); ++ int (*get_color_key) (struct omapfb_color_key *ck); ++}; ++ ++enum omapfb_state { ++ OMAPFB_DISABLED = 0, ++ OMAPFB_SUSPENDED= 99, ++ OMAPFB_ACTIVE = 100 ++}; ++ ++struct omapfb_plane_struct { ++ int idx; ++ struct omapfb_plane_info info; ++ enum omapfb_color_format color_mode; ++ struct omapfb_device *fbdev; ++}; ++ ++struct omapfb_device { ++ int state; ++ int ext_lcdc; /* Using external ++ LCD controller */ ++ struct mutex rqueue_mutex; ++ ++ int palette_size; ++ u32 pseudo_palette[17]; ++ ++ struct lcd_panel *panel; /* LCD panel */ ++ const struct lcd_ctrl *ctrl; /* LCD controller */ ++ const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */ ++ struct lcd_ctrl_extif *ext_if; /* LCD ctrl external ++ interface */ ++ struct device *dev; ++ struct fb_var_screeninfo new_var; /* for mode changes */ ++ ++ struct omapfb_mem_desc mem_desc; ++ struct fb_info *fb_info[OMAPFB_PLANE_NUM]; ++}; ++ ++struct omapfb_platform_data { ++ struct omap_lcd_config lcd; ++ struct omapfb_mem_desc mem_desc; ++ void *ctrl_platform_data; ++}; ++ ++#ifdef CONFIG_ARCH_OMAP1 ++extern struct lcd_ctrl omap1_lcd_ctrl; ++#else ++extern struct lcd_ctrl omap2_disp_ctrl; ++#endif ++ ++extern void omapfb_reserve_sdram(void); ++extern void omapfb_register_panel(struct lcd_panel *panel); ++extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); ++extern void omapfb_notify_clients(struct omapfb_device *fbdev, ++ unsigned long event); ++extern int omapfb_register_client(struct omapfb_notifier_block *nb, ++ omapfb_notifier_callback_t callback, ++ void *callback_data); ++extern int omapfb_unregister_client(struct omapfb_notifier_block *nb); ++extern int omapfb_update_window_async(struct fb_info *fbi, ++ struct omapfb_update_window *win, ++ void (*callback)(void *), ++ void *callback_data); ++ ++/* in arch/arm/plat-omap/fb.c */ ++extern void omapfb_set_ctrl_platform_data(void *pdata); ++ ++#endif /* __KERNEL__ */ ++ ++#endif /* __OMAPFB_H */ +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0003-DSS2-OMAP2-3-Display-Subsystem-driver.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0003-DSS2-OMAP2-3-Display-Subsystem-driver.patch new file mode 100644 index 000000000..c3523362c --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0003-DSS2-OMAP2-3-Display-Subsystem-driver.patch @@ -0,0 +1,14450 @@ +From 284deec412f9c6f15c971d8eaf4d0156a51a2f3b Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Thu, 2 Apr 2009 10:23:42 +0300 +Subject: [PATCH] DSS2: OMAP2/3 Display Subsystem driver + +Signed-off-by: Tomi Valkeinen +--- + Documentation/arm/OMAP/DSS | 311 +++ + arch/arm/plat-omap/Makefile | 2 +- + arch/arm/plat-omap/include/mach/display.h | 520 ++++ + arch/arm/plat-omap/include/mach/vram.h | 33 + + arch/arm/plat-omap/include/mach/vrfb.h | 47 + + arch/arm/plat-omap/vram.c | 615 +++++ + arch/arm/plat-omap/vrfb.c | 159 ++ + drivers/video/Kconfig | 1 + + drivers/video/Makefile | 1 + + drivers/video/omap2/Kconfig | 3 + + drivers/video/omap2/Makefile | 4 + + drivers/video/omap2/dss/Kconfig | 89 + + drivers/video/omap2/dss/Makefile | 6 + + drivers/video/omap2/dss/core.c | 641 +++++ + drivers/video/omap2/dss/dispc.c | 2968 +++++++++++++++++++++++ + drivers/video/omap2/dss/display.c | 693 ++++++ + drivers/video/omap2/dss/dpi.c | 393 +++ + drivers/video/omap2/dss/dsi.c | 3752 +++++++++++++++++++++++++++++ + drivers/video/omap2/dss/dss.c | 345 +++ + drivers/video/omap2/dss/dss.h | 331 +++ + drivers/video/omap2/dss/manager.c | 576 +++++ + drivers/video/omap2/dss/overlay.c | 587 +++++ + drivers/video/omap2/dss/rfbi.c | 1304 ++++++++++ + drivers/video/omap2/dss/sdi.c | 245 ++ + drivers/video/omap2/dss/venc.c | 600 +++++ + 25 files changed, 14225 insertions(+), 1 deletions(-) + create mode 100644 Documentation/arm/OMAP/DSS + create mode 100644 arch/arm/plat-omap/include/mach/display.h + create mode 100644 arch/arm/plat-omap/include/mach/vram.h + create mode 100644 arch/arm/plat-omap/include/mach/vrfb.h + create mode 100644 arch/arm/plat-omap/vram.c + create mode 100644 arch/arm/plat-omap/vrfb.c + create mode 100644 drivers/video/omap2/Kconfig + create mode 100644 drivers/video/omap2/Makefile + create mode 100644 drivers/video/omap2/dss/Kconfig + create mode 100644 drivers/video/omap2/dss/Makefile + create mode 100644 drivers/video/omap2/dss/core.c + create mode 100644 drivers/video/omap2/dss/dispc.c + create mode 100644 drivers/video/omap2/dss/display.c + create mode 100644 drivers/video/omap2/dss/dpi.c + create mode 100644 drivers/video/omap2/dss/dsi.c + create mode 100644 drivers/video/omap2/dss/dss.c + create mode 100644 drivers/video/omap2/dss/dss.h + create mode 100644 drivers/video/omap2/dss/manager.c + create mode 100644 drivers/video/omap2/dss/overlay.c + create mode 100644 drivers/video/omap2/dss/rfbi.c + create mode 100644 drivers/video/omap2/dss/sdi.c + create mode 100644 drivers/video/omap2/dss/venc.c + +diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS +new file mode 100644 +index 0000000..9e902a2 +--- /dev/null ++++ b/Documentation/arm/OMAP/DSS +@@ -0,0 +1,311 @@ ++OMAP2/3 Display Subsystem ++------------------------- ++ ++This is an almost total rewrite of the OMAP FB driver in drivers/video/omap ++(let's call it DSS1). The main differences between DSS1 and DSS2 are DSI, ++TV-out and multiple display support, but there are lots of small improvements ++also. ++ ++The DSS2 driver (omapdss module) is in arch/arm/plat-omap/dss/, and the FB, ++panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live ++currently side by side, you can choose which one to use. ++ ++Features ++-------- ++ ++Working and tested features include: ++ ++- MIPI DPI (parallel) output ++- MIPI DSI output in command mode ++- MIPI DBI (RFBI) output ++- SDI output ++- TV output ++- All pieces can be compiled as a module or inside kernel ++- Use DISPC to update any of the outputs ++- Use CPU to update RFBI or DSI output ++- OMAP DISPC planes ++- RGB16, RGB24 packed, RGB24 unpacked ++- YUV2, UYVY ++- Scaling ++- Adjusting DSS FCK to find a good pixel clock ++- Use DSI DPLL to create DSS FCK ++ ++Tested boards include: ++- OMAP3 SDP board ++- Beagle board ++- N810 ++ ++omapdss driver ++-------------- ++ ++The DSS driver does not itself have any support for Linux framebuffer, V4L or ++such like the current ones, but it has an internal kernel API that upper level ++drivers can use. ++ ++The DSS driver models OMAP's overlays, overlay managers and displays in a ++flexible way to enable non-common multi-display configuration. In addition to ++modelling the hardware overlays, omapdss supports virtual overlays and overlay ++managers. These can be used when updating a display with CPU or system DMA. ++ ++Panel and controller drivers ++---------------------------- ++ ++The drivers implement panel or controller specific functionality and are not ++usually visible to users except through omapfb driver. They register ++themselves to the DSS driver. ++ ++omapfb driver ++------------- ++ ++The omapfb driver implements arbitrary number of standard linux framebuffers. ++These framebuffers can be routed flexibly to any overlays, thus allowing very ++dynamic display architecture. ++ ++The driver exports some omapfb specific ioctls, which are compatible with the ++ioctls in the old driver. ++ ++The rest of the non standard features are exported via sysfs. Whether the final ++implementation will use sysfs, or ioctls, is still open. ++ ++V4L2 drivers ++------------ ++ ++V4L2 is being implemented in TI. ++ ++From omapdss point of view the V4L2 drivers should be similar to framebuffer ++driver. ++ ++Architecture ++-------------------- ++ ++Some clarification what the different components do: ++ ++ - Framebuffer is a memory area inside OMAP's SRAM/SDRAM that contains the ++ pixel data for the image. Framebuffer has width and height and color ++ depth. ++ - Overlay defines where the pixels are read from and where they go on the ++ screen. The overlay may be smaller than framebuffer, thus displaying only ++ part of the framebuffer. The position of the overlay may be changed if ++ the overlay is smaller than the display. ++ - Overlay manager combines the overlays in to one image and feeds them to ++ display. ++ - Display is the actual physical display device. ++ ++A framebuffer can be connected to multiple overlays to show the same pixel data ++on all of the overlays. Note that in this case the overlay input sizes must be ++the same, but, in case of video overlays, the output size can be different. Any ++framebuffer can be connected to any overlay. ++ ++An overlay can be connected to one overlay manager. Also DISPC overlays can be ++connected only to DISPC overlay managers, and virtual overlays can be only ++connected to virtual overlays. ++ ++An overlay manager can be connected to one display. There are certain ++restrictions which kinds of displays an overlay manager can be connected: ++ ++ - DISPC TV overlay manager can be only connected to TV display. ++ - Virtual overlay managers can only be connected to DBI or DSI displays. ++ - DISPC LCD overlay manager can be connected to all displays, except TV ++ display. ++ ++Sysfs ++----- ++The sysfs interface is mainly used for testing. I don't think sysfs ++interface is the best for this in the final version, but I don't quite know ++what would be the best interfaces for these things. ++ ++The sysfs interface is divided to two parts: DSS and FB. ++ ++/sys/class/graphics/fb? directory: ++mirror 0=off, 1=on ++rotate Rotation 0-3 for 0, 90, 180, 270 degrees ++rotate_type 0 = DMA rotation, 1 = VRFB rotation ++overlays List of overlay numbers to which framebuffer pixels go ++phys_addr Physical address of the framebuffer ++virt_addr Virtual address of the framebuffer ++size Size of the framebuffer ++ ++/sys/devices/platform/omapdss/overlay? directory: ++enabled 0=off, 1=on ++input_size width,height (ie. the framebuffer size) ++manager Destination overlay manager name ++name ++output_size width,height ++position x,y ++screen_width width ++ ++/sys/devices/platform/omapdss/manager? directory: ++display Destination display ++name ++ ++/sys/devices/platform/omapdss/display? directory: ++ctrl_name Controller name ++mirror 0=off, 1=on ++update_mode 0=off, 1=auto, 2=manual ++enabled 0=off, 1=on ++name ++rotate Rotation 0-3 for 0, 90, 180, 270 degrees ++timings Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw) ++ When writing, two special timings are accepted for tv-out: ++ "pal" and "ntsc" ++panel_name ++tear_elim Tearing elimination 0=off, 1=on ++ ++There are also some debugfs files at /omapdss/ which show information ++about clocks and registers. ++ ++Examples ++-------- ++ ++The following definitions have been made for the examples below: ++ ++ovl0=/sys/devices/platform/omapdss/overlay0 ++ovl1=/sys/devices/platform/omapdss/overlay1 ++ovl2=/sys/devices/platform/omapdss/overlay2 ++ ++mgr0=/sys/devices/platform/omapdss/manager0 ++mgr1=/sys/devices/platform/omapdss/manager1 ++ ++lcd=/sys/devices/platform/omapdss/display0 ++dvi=/sys/devices/platform/omapdss/display1 ++tv=/sys/devices/platform/omapdss/display2 ++ ++fb0=/sys/class/graphics/fb0 ++fb1=/sys/class/graphics/fb1 ++fb2=/sys/class/graphics/fb2 ++ ++Default setup on OMAP3 SDP ++-------------------------- ++ ++Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI ++and TV-out are not in use. The columns from left to right are: ++framebuffers, overlays, overlay managers, displays. Framebuffers are ++handled by omapfb, and the rest by the DSS. ++ ++FB0 --- GFX -\ DVI ++FB1 --- VID1 --+- LCD ---- LCD ++FB2 --- VID2 -/ TV ----- TV ++ ++Example: Switch from LCD to DVI ++---------------------- ++ ++w=`cat $dvi/horizontal | cut -d "," -f 1` ++h=`cat $dvi/vertical | cut -d "," -f 1` ++ ++echo "0" > $lcd/enabled ++echo "" > $mgr0/display ++fbset -fb /dev/fb0 -xres $w -yres $h -vxres $w -vyres $h ++# at this point you have to switch the dvi/lcd dip-switch from the omap board ++echo "dvi" > $mgr0/display ++echo "1" > $dvi/enabled ++ ++After this the configuration looks like: ++ ++FB0 --- GFX -\ -- DVI ++FB1 --- VID1 --+- LCD -/ LCD ++FB2 --- VID2 -/ TV ----- TV ++ ++Example: Clone GFX overlay to LCD and TV ++------------------------------- ++ ++w=`cat $tv/horizontal | cut -d "," -f 1` ++h=`cat $tv/vertical | cut -d "," -f 1` ++ ++echo "0" > $ovl0/enabled ++echo "0" > $ovl1/enabled ++ ++echo "" > $fb1/overlays ++echo "0,1" > $fb0/overlays ++ ++echo "$w,$h" > $ovl1/output_size ++echo "tv" > $ovl1/manager ++ ++echo "1" > $ovl0/enabled ++echo "1" > $ovl1/enabled ++ ++echo "1" > $tv/enabled ++ ++After this the configuration looks like (only relevant parts shown): ++ ++FB0 +-- GFX ---- LCD ---- LCD ++ \- VID1 ---- TV ---- TV ++ ++Misc notes ++---------- ++ ++OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator. ++ ++Using DSI DPLL to generate pixel clock it is possible produce the pixel clock ++of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI. ++ ++Rotation and mirroring currently only supports RGB565 and RGB8888 modes. VRFB ++does not support mirroring. ++ ++VRFB rotation requires much more memory than non-rotated framebuffer, so you ++probably need to increase your vram setting before using VRFB rotation. Also, ++many applications may not work with VRFB if they do not pay attention to all ++framebuffer parameters. ++ ++Kernel boot arguments ++--------------------- ++ ++vram= ++ - Amount of total VRAM to preallocate. For example, "10M". omapfb ++ allocates memory for framebuffers from VRAM. ++ ++omapfb.mode=:[,...] ++ - Default video mode for specified displays. For example, ++ "dvi:800x400MR-24@60". See drivers/video/modedb.c. ++ There are also two special modes: "pal" and "ntsc" that ++ can be used to tv out. ++ ++omapfb.vram=:[@][,...] ++ - VRAM allocated for a framebuffer. Normally omapfb allocates vram ++ depending on the display size. With this you can manually allocate ++ more or define the physical address of each framebuffer. For example, ++ "1:4M" to allocate 4M for fb1. ++ ++omapfb.debug= ++ - Enable debug printing. You have to have OMAPFB debug support enabled ++ in kernel config. ++ ++omapfb.test= ++ - Draw test pattern to framebuffer whenever framebuffer settings change. ++ You need to have OMAPFB debug support enabled in kernel config. ++ ++omapfb.vrfb= ++ - Use VRFB rotation for all framebuffers. ++ ++omapfb.rotate= ++ - Default rotation applied to all framebuffers. ++ 0 - 0 degree rotation ++ 1 - 90 degree rotation ++ 2 - 180 degree rotation ++ 3 - 270 degree rotation ++ ++omapfb.mirror= ++ - Default mirror for all framebuffers. Only works with DMA rotation. ++ ++omapdss.def_disp= ++ - Name of default display, to which all overlays will be connected. ++ Common examples are "lcd" or "tv". ++ ++omapdss.debug= ++ - Enable debug printing. You have to have DSS debug support enabled in ++ kernel config. ++ ++TODO ++---- ++ ++DSS locking ++ ++Error checking ++- Lots of checks are missing or implemented just as BUG() ++ ++System DMA update for DSI ++- Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how ++ to skip the empty byte?) ++ ++OMAP1 support ++- Not sure if needed ++ +diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile +index 3ebc09e..e6146b2 100644 +--- a/arch/arm/plat-omap/Makefile ++++ b/arch/arm/plat-omap/Makefile +@@ -4,7 +4,7 @@ + + # Common support + obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \ +- usb.o fb.o io.o ++ usb.o fb.o vram.o vrfb.o io.o + obj-m := + obj-n := + obj- := +diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h +new file mode 100644 +index 0000000..6288353 +--- /dev/null ++++ b/arch/arm/plat-omap/include/mach/display.h +@@ -0,0 +1,520 @@ ++/* ++ * linux/include/asm-arm/arch-omap/display.h ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#ifndef __ASM_ARCH_OMAP_DISPLAY_H ++#define __ASM_ARCH_OMAP_DISPLAY_H ++ ++#include ++#include ++#include ++ ++#define DISPC_IRQ_FRAMEDONE (1 << 0) ++#define DISPC_IRQ_VSYNC (1 << 1) ++#define DISPC_IRQ_EVSYNC_EVEN (1 << 2) ++#define DISPC_IRQ_EVSYNC_ODD (1 << 3) ++#define DISPC_IRQ_ACBIAS_COUNT_STAT (1 << 4) ++#define DISPC_IRQ_PROG_LINE_NUM (1 << 5) ++#define DISPC_IRQ_GFX_FIFO_UNDERFLOW (1 << 6) ++#define DISPC_IRQ_GFX_END_WIN (1 << 7) ++#define DISPC_IRQ_PAL_GAMMA_MASK (1 << 8) ++#define DISPC_IRQ_OCP_ERR (1 << 9) ++#define DISPC_IRQ_VID1_FIFO_UNDERFLOW (1 << 10) ++#define DISPC_IRQ_VID1_END_WIN (1 << 11) ++#define DISPC_IRQ_VID2_FIFO_UNDERFLOW (1 << 12) ++#define DISPC_IRQ_VID2_END_WIN (1 << 13) ++#define DISPC_IRQ_SYNC_LOST (1 << 14) ++#define DISPC_IRQ_SYNC_LOST_DIGIT (1 << 15) ++#define DISPC_IRQ_WAKEUP (1 << 16) ++ ++enum omap_display_type { ++ OMAP_DISPLAY_TYPE_NONE = 0, ++ OMAP_DISPLAY_TYPE_DPI = 1 << 0, ++ OMAP_DISPLAY_TYPE_DBI = 1 << 1, ++ OMAP_DISPLAY_TYPE_SDI = 1 << 2, ++ OMAP_DISPLAY_TYPE_DSI = 1 << 3, ++ OMAP_DISPLAY_TYPE_VENC = 1 << 4, ++}; ++ ++enum omap_plane { ++ OMAP_DSS_GFX = 0, ++ OMAP_DSS_VIDEO1 = 1, ++ OMAP_DSS_VIDEO2 = 2 ++}; ++ ++enum omap_channel { ++ OMAP_DSS_CHANNEL_LCD = 0, ++ OMAP_DSS_CHANNEL_DIGIT = 1, ++}; ++ ++enum omap_color_mode { ++ OMAP_DSS_COLOR_CLUT1 = 1 << 0, /* BITMAP 1 */ ++ OMAP_DSS_COLOR_CLUT2 = 1 << 1, /* BITMAP 2 */ ++ OMAP_DSS_COLOR_CLUT4 = 1 << 2, /* BITMAP 4 */ ++ OMAP_DSS_COLOR_CLUT8 = 1 << 3, /* BITMAP 8 */ ++ OMAP_DSS_COLOR_RGB12U = 1 << 4, /* RGB12, 16-bit container */ ++ OMAP_DSS_COLOR_ARGB16 = 1 << 5, /* ARGB16 */ ++ OMAP_DSS_COLOR_RGB16 = 1 << 6, /* RGB16 */ ++ OMAP_DSS_COLOR_RGB24U = 1 << 7, /* RGB24, 32-bit container */ ++ OMAP_DSS_COLOR_RGB24P = 1 << 8, /* RGB24, 24-bit container */ ++ OMAP_DSS_COLOR_YUV2 = 1 << 9, /* YUV2 4:2:2 co-sited */ ++ OMAP_DSS_COLOR_UYVY = 1 << 10, /* UYVY 4:2:2 co-sited */ ++ OMAP_DSS_COLOR_ARGB32 = 1 << 11, /* ARGB32 */ ++ OMAP_DSS_COLOR_RGBA32 = 1 << 12, /* RGBA32 */ ++ OMAP_DSS_COLOR_RGBX32 = 1 << 13, /* RGBx32 */ ++ ++ OMAP_DSS_COLOR_GFX_OMAP3 = ++ OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 | ++ OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 | ++ OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | ++ OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | ++ OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 | ++ OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32, ++ ++ OMAP_DSS_COLOR_VID_OMAP3 = ++ OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | ++ OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | ++ OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 | ++ OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32 | ++ OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY, ++}; ++ ++enum omap_lcd_display_type { ++ OMAP_DSS_LCD_DISPLAY_STN, ++ OMAP_DSS_LCD_DISPLAY_TFT, ++}; ++ ++enum omap_dss_load_mode { ++ OMAP_DSS_LOAD_CLUT_AND_FRAME = 0, ++ OMAP_DSS_LOAD_CLUT_ONLY = 1, ++ OMAP_DSS_LOAD_FRAME_ONLY = 2, ++ OMAP_DSS_LOAD_CLUT_ONCE_FRAME = 3, ++}; ++ ++enum omap_dss_color_key_type { ++ OMAP_DSS_COLOR_KEY_GFX_DST = 0, ++ OMAP_DSS_COLOR_KEY_VID_SRC = 1, ++}; ++ ++enum omap_rfbi_te_mode { ++ OMAP_DSS_RFBI_TE_MODE_1 = 1, ++ OMAP_DSS_RFBI_TE_MODE_2 = 2, ++}; ++ ++enum omap_panel_config { ++ OMAP_DSS_LCD_IVS = 1<<0, ++ OMAP_DSS_LCD_IHS = 1<<1, ++ OMAP_DSS_LCD_IPC = 1<<2, ++ OMAP_DSS_LCD_IEO = 1<<3, ++ OMAP_DSS_LCD_RF = 1<<4, ++ OMAP_DSS_LCD_ONOFF = 1<<5, ++ ++ OMAP_DSS_LCD_TFT = 1<<20, ++}; ++ ++enum omap_dss_venc_type { ++ OMAP_DSS_VENC_TYPE_COMPOSITE, ++ OMAP_DSS_VENC_TYPE_SVIDEO, ++}; ++ ++struct omap_display; ++struct omap_panel; ++struct omap_ctrl; ++ ++/* RFBI */ ++ ++struct rfbi_timings { ++ int cs_on_time; ++ int cs_off_time; ++ int we_on_time; ++ int we_off_time; ++ int re_on_time; ++ int re_off_time; ++ int we_cycle_time; ++ int re_cycle_time; ++ int cs_pulse_width; ++ int access_time; ++ ++ int clk_div; ++ ++ u32 tim[5]; /* set by rfbi_convert_timings() */ ++ ++ int converted; ++}; ++ ++void omap_rfbi_write_command(const void *buf, u32 len); ++void omap_rfbi_read_data(void *buf, u32 len); ++void omap_rfbi_write_data(const void *buf, u32 len); ++void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width, ++ u16 x, u16 y, ++ u16 w, u16 h); ++int omap_rfbi_enable_te(bool enable, unsigned line); ++int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, ++ unsigned hs_pulse_time, unsigned vs_pulse_time, ++ int hs_pol_inv, int vs_pol_inv, int extif_div); ++ ++/* DSI */ ++int dsi_vc_dcs_write(int channel, u8 *data, int len); ++int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len); ++int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen); ++int dsi_vc_set_max_rx_packet_size(int channel, u16 len); ++int dsi_vc_send_null(int channel); ++ ++/* Board specific data */ ++struct omap_dss_display_config { ++ enum omap_display_type type; ++ ++ union { ++ struct { ++ u8 data_lines; ++ } dpi; ++ ++ struct { ++ u8 channel; ++ u8 data_lines; ++ } rfbi; ++ ++ struct { ++ u8 datapairs; ++ } sdi; ++ ++ struct { ++ u8 clk_lane; ++ u8 clk_pol; ++ u8 data1_lane; ++ u8 data1_pol; ++ u8 data2_lane; ++ u8 data2_pol; ++ unsigned long ddr_clk_hz; ++ } dsi; ++ ++ struct { ++ enum omap_dss_venc_type type; ++ } venc; ++ } u; ++ ++ int panel_reset_gpio; ++ int ctrl_reset_gpio; ++ ++ const char *name; /* for debug */ ++ const char *ctrl_name; ++ const char *panel_name; ++ ++ void *panel_data; ++ void *ctrl_data; ++ ++ /* platform specific enable/disable */ ++ int (*panel_enable)(struct omap_display *display); ++ void (*panel_disable)(struct omap_display *display); ++ int (*ctrl_enable)(struct omap_display *display); ++ void (*ctrl_disable)(struct omap_display *display); ++ int (*set_backlight)(struct omap_display *display, ++ int level); ++}; ++ ++struct device; ++ ++/* Board specific data */ ++struct omap_dss_board_info { ++ unsigned (*get_last_off_on_transaction_id)(struct device *dev); ++ int (*dsi_power_up)(void); ++ void (*dsi_power_down)(void); ++ int num_displays; ++ struct omap_dss_display_config *displays[]; ++}; ++ ++struct omap_ctrl { ++ struct module *owner; ++ ++ const char *name; ++ ++ int (*init)(struct omap_display *display); ++ void (*cleanup)(struct omap_display *display); ++ int (*enable)(struct omap_display *display); ++ void (*disable)(struct omap_display *display); ++ int (*suspend)(struct omap_display *display); ++ int (*resume)(struct omap_display *display); ++ void (*setup_update)(struct omap_display *display, ++ u16 x, u16 y, u16 w, u16 h); ++ ++ int (*enable_te)(struct omap_display *display, bool enable); ++ ++ u8 (*get_rotate)(struct omap_display *display); ++ int (*set_rotate)(struct omap_display *display, u8 rotate); ++ ++ bool (*get_mirror)(struct omap_display *display); ++ int (*set_mirror)(struct omap_display *display, bool enable); ++ ++ int (*run_test)(struct omap_display *display, int test); ++ int (*memory_read)(struct omap_display *display, ++ void *buf, size_t size, ++ u16 x, u16 y, u16 w, u16 h); ++ ++ u8 pixel_size; ++ ++ struct rfbi_timings timings; ++ ++ void *priv; ++}; ++ ++struct omap_video_timings { ++ /* Unit: pixels */ ++ u16 x_res; ++ /* Unit: pixels */ ++ u16 y_res; ++ /* Unit: KHz */ ++ u32 pixel_clock; ++ /* Unit: pixel clocks */ ++ u16 hsw; /* Horizontal synchronization pulse width */ ++ /* Unit: pixel clocks */ ++ u16 hfp; /* Horizontal front porch */ ++ /* Unit: pixel clocks */ ++ u16 hbp; /* Horizontal back porch */ ++ /* Unit: line clocks */ ++ u16 vsw; /* Vertical synchronization pulse width */ ++ /* Unit: line clocks */ ++ u16 vfp; /* Vertical front porch */ ++ /* Unit: line clocks */ ++ u16 vbp; /* Vertical back porch */ ++ ++}; ++ ++#ifdef CONFIG_OMAP2_DSS_VENC ++/* Hardcoded timings for tv modes. Venc only uses these to ++ * identify the mode, and does not actually use the configs ++ * itself. However, the configs should be something that ++ * a normal monitor can also show */ ++const extern struct omap_video_timings omap_dss_pal_timings; ++const extern struct omap_video_timings omap_dss_ntsc_timings; ++#endif ++ ++struct omap_panel { ++ struct module *owner; ++ ++ const char *name; ++ ++ int (*init)(struct omap_display *display); ++ void (*cleanup)(struct omap_display *display); ++ int (*remove)(struct omap_display *display); ++ int (*enable)(struct omap_display *display); ++ void (*disable)(struct omap_display *display); ++ int (*suspend)(struct omap_display *display); ++ int (*resume)(struct omap_display *display); ++ int (*run_test)(struct omap_display *display, int test); ++ ++ struct omap_video_timings timings; ++ ++ int acbi; /* ac-bias pin transitions per interrupt */ ++ /* Unit: line clocks */ ++ int acb; /* ac-bias pin frequency */ ++ ++ enum omap_panel_config config; ++ ++ u8 recommended_bpp; ++ ++ void *priv; ++}; ++ ++/* XXX perhaps this should be removed */ ++enum omap_dss_overlay_managers { ++ OMAP_DSS_OVL_MGR_LCD, ++ OMAP_DSS_OVL_MGR_TV, ++}; ++ ++struct omap_overlay_manager; ++ ++struct omap_overlay_info { ++ bool enabled; ++ ++ u32 paddr; ++ void __iomem *vaddr; ++ u16 screen_width; ++ u16 width; ++ u16 height; ++ enum omap_color_mode color_mode; ++ u8 rotation; ++ bool mirror; ++ ++ u16 pos_x; ++ u16 pos_y; ++ u16 out_width; /* if 0, out_width == width */ ++ u16 out_height; /* if 0, out_height == height */ ++}; ++ ++enum omap_overlay_caps { ++ OMAP_DSS_OVL_CAP_SCALE = 1 << 0, ++ OMAP_DSS_OVL_CAP_DISPC = 1 << 1, ++}; ++ ++struct omap_overlay { ++ struct kobject kobj; ++ struct list_head list; ++ ++ const char *name; ++ int id; ++ struct omap_overlay_manager *manager; ++ enum omap_color_mode supported_modes; ++ struct omap_overlay_info info; ++ enum omap_overlay_caps caps; ++ ++ int (*set_manager)(struct omap_overlay *ovl, ++ struct omap_overlay_manager *mgr); ++ int (*unset_manager)(struct omap_overlay *ovl); ++ ++ int (*set_overlay_info)(struct omap_overlay *ovl, ++ struct omap_overlay_info *info); ++ void (*get_overlay_info)(struct omap_overlay *ovl, ++ struct omap_overlay_info *info); ++}; ++ ++enum omap_overlay_manager_caps { ++ OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0, ++}; ++ ++struct omap_overlay_manager { ++ struct kobject kobj; ++ struct list_head list; ++ ++ const char *name; ++ int id; ++ enum omap_overlay_manager_caps caps; ++ struct omap_display *display; ++ int num_overlays; ++ struct omap_overlay **overlays; ++ enum omap_display_type supported_displays; ++ ++ int (*set_display)(struct omap_overlay_manager *mgr, ++ struct omap_display *display); ++ int (*unset_display)(struct omap_overlay_manager *mgr); ++ ++ int (*apply)(struct omap_overlay_manager *mgr); ++ ++ void (*set_default_color)(struct omap_overlay_manager *mgr, u32 color); ++ void (*set_trans_key)(struct omap_overlay_manager *mgr, ++ enum omap_dss_color_key_type type, ++ u32 trans_key); ++ void (*enable_trans_key)(struct omap_overlay_manager *mgr, ++ bool enable); ++}; ++ ++enum omap_display_caps { ++ OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE = 1 << 0, ++}; ++ ++enum omap_dss_update_mode { ++ OMAP_DSS_UPDATE_DISABLED = 0, ++ OMAP_DSS_UPDATE_AUTO, ++ OMAP_DSS_UPDATE_MANUAL, ++}; ++ ++enum omap_dss_display_state { ++ OMAP_DSS_DISPLAY_DISABLED = 0, ++ OMAP_DSS_DISPLAY_ACTIVE, ++ OMAP_DSS_DISPLAY_SUSPENDED, ++}; ++ ++struct omap_display { ++ struct kobject kobj; ++ struct list_head list; ++ ++ /*atomic_t ref_count;*/ ++ int ref_count; ++ /* helper variable for driver suspend/resume */ ++ int activate_after_resume; ++ ++ enum omap_display_type type; ++ const char *name; ++ ++ enum omap_display_caps caps; ++ ++ struct omap_overlay_manager *manager; ++ ++ enum omap_dss_display_state state; ++ ++ struct omap_dss_display_config hw_config; /* board specific data */ ++ struct omap_ctrl *ctrl; /* static common data */ ++ struct omap_panel *panel; /* static common data */ ++ ++ int (*enable)(struct omap_display *display); ++ void (*disable)(struct omap_display *display); ++ ++ int (*suspend)(struct omap_display *display); ++ int (*resume)(struct omap_display *display); ++ ++ void (*get_resolution)(struct omap_display *display, ++ u16 *xres, u16 *yres); ++ int (*get_recommended_bpp)(struct omap_display *display); ++ ++ int (*check_timings)(struct omap_display *display, ++ struct omap_video_timings *timings); ++ void (*set_timings)(struct omap_display *display, ++ struct omap_video_timings *timings); ++ void (*get_timings)(struct omap_display *display, ++ struct omap_video_timings *timings); ++ int (*update)(struct omap_display *display, ++ u16 x, u16 y, u16 w, u16 h); ++ int (*sync)(struct omap_display *display); ++ int (*wait_vsync)(struct omap_display *display); ++ ++ int (*set_update_mode)(struct omap_display *display, ++ enum omap_dss_update_mode); ++ enum omap_dss_update_mode (*get_update_mode) ++ (struct omap_display *display); ++ ++ int (*enable_te)(struct omap_display *display, bool enable); ++ int (*get_te)(struct omap_display *display); ++ ++ u8 (*get_rotate)(struct omap_display *display); ++ int (*set_rotate)(struct omap_display *display, u8 rotate); ++ ++ bool (*get_mirror)(struct omap_display *display); ++ int (*set_mirror)(struct omap_display *display, bool enable); ++ ++ int (*run_test)(struct omap_display *display, int test); ++ int (*memory_read)(struct omap_display *display, ++ void *buf, size_t size, ++ u16 x, u16 y, u16 w, u16 h); ++ ++ void (*configure_overlay)(struct omap_overlay *overlay); ++}; ++ ++int omap_dss_get_num_displays(void); ++struct omap_display *omap_dss_get_display(int no); ++void omap_dss_put_display(struct omap_display *display); ++ ++void omap_dss_register_ctrl(struct omap_ctrl *ctrl); ++void omap_dss_unregister_ctrl(struct omap_ctrl *ctrl); ++ ++void omap_dss_register_panel(struct omap_panel *panel); ++void omap_dss_unregister_panel(struct omap_panel *panel); ++ ++int omap_dss_get_num_overlay_managers(void); ++struct omap_overlay_manager *omap_dss_get_overlay_manager(int num); ++ ++int omap_dss_get_num_overlays(void); ++struct omap_overlay *omap_dss_get_overlay(int num); ++ ++typedef void (*omap_dispc_isr_t) (void *arg, u32 mask); ++int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask); ++int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask); ++ ++int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout); ++int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask, ++ unsigned long timeout); ++ ++#endif +diff --git a/arch/arm/plat-omap/include/mach/vram.h b/arch/arm/plat-omap/include/mach/vram.h +new file mode 100644 +index 0000000..f176562 +--- /dev/null ++++ b/arch/arm/plat-omap/include/mach/vram.h +@@ -0,0 +1,33 @@ ++/* ++ * File: arch/arm/plat-omap/include/mach/vram.h ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#ifndef __OMAPVRAM_H ++#define __OMAPVRAM_H ++ ++#include ++ ++extern int omap_vram_free(unsigned long paddr, size_t size); ++extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr); ++extern int omap_vram_reserve(unsigned long paddr, size_t size); ++extern void omap2_set_sdram_vram(u32 size, u32 start); ++extern void omap2_set_sram_vram(u32 size, u32 start); ++ ++#endif +diff --git a/arch/arm/plat-omap/include/mach/vrfb.h b/arch/arm/plat-omap/include/mach/vrfb.h +new file mode 100644 +index 0000000..2047862 +--- /dev/null ++++ b/arch/arm/plat-omap/include/mach/vrfb.h +@@ -0,0 +1,47 @@ ++/* ++ * File: arch/arm/plat-omap/include/mach/vrfb.h ++ * ++ * VRFB ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#ifndef __VRFB_H ++#define __VRFB_H ++ ++#define OMAP_VRFB_LINE_LEN 2048 ++ ++struct vrfb ++{ ++ u8 context; ++ void __iomem *vaddr[4]; ++ unsigned long paddr[4]; ++ u16 xoffset; ++ u16 yoffset; ++ u8 bytespp; ++}; ++ ++extern int omap_vrfb_request_ctx(struct vrfb *vrfb); ++extern void omap_vrfb_release_ctx(struct vrfb *vrfb); ++extern void omap_vrfb_adjust_size(u16 *width, u16 *height, ++ u8 bytespp); ++extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, ++ u16 width, u16 height, ++ u8 bytespp); ++ ++#endif /* __VRFB_H */ +diff --git a/arch/arm/plat-omap/vram.c b/arch/arm/plat-omap/vram.c +new file mode 100644 +index 0000000..f24a110 +--- /dev/null ++++ b/arch/arm/plat-omap/vram.c +@@ -0,0 +1,615 @@ ++/* ++ * linux/arch/arm/plat-omap/vram.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++/*#define DEBUG*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++ ++#ifdef DEBUG ++#define DBG(format, ...) printk(KERN_DEBUG "VRAM: " format, ## __VA_ARGS__) ++#else ++#define DBG(format, ...) ++#endif ++ ++#define OMAP2_SRAM_START 0x40200000 ++/* Maximum size, in reality this is smaller if SRAM is partially locked. */ ++#define OMAP2_SRAM_SIZE 0xa0000 /* 640k */ ++ ++#define REG_MAP_SIZE(_page_cnt) \ ++ ((_page_cnt + (sizeof(unsigned long) * 8) - 1) / 8) ++#define REG_MAP_PTR(_rg, _page_nr) \ ++ (((_rg)->map) + (_page_nr) / (sizeof(unsigned long) * 8)) ++#define REG_MAP_MASK(_page_nr) \ ++ (1 << ((_page_nr) & (sizeof(unsigned long) * 8 - 1))) ++ ++#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) ++ ++/* postponed regions are used to temporarily store region information at boot ++ * time when we cannot yet allocate the region list */ ++#define MAX_POSTPONED_REGIONS 10 ++ ++static int postponed_cnt __initdata; ++static struct { ++ unsigned long paddr; ++ size_t size; ++} postponed_regions[MAX_POSTPONED_REGIONS] __initdata; ++ ++struct vram_alloc { ++ struct list_head list; ++ unsigned long paddr; ++ unsigned pages; ++}; ++ ++struct vram_region { ++ struct list_head list; ++ struct list_head alloc_list; ++ unsigned long paddr; ++ unsigned pages; ++}; ++ ++static DEFINE_MUTEX(region_mutex); ++static LIST_HEAD(region_list); ++ ++static inline int region_mem_type(unsigned long paddr) ++{ ++ if (paddr >= OMAP2_SRAM_START && ++ paddr < OMAP2_SRAM_START + OMAP2_SRAM_SIZE) ++ return OMAPFB_MEMTYPE_SRAM; ++ else ++ return OMAPFB_MEMTYPE_SDRAM; ++} ++ ++static struct vram_region *omap_vram_create_region(unsigned long paddr, ++ unsigned pages) ++{ ++ struct vram_region *rm; ++ ++ rm = kzalloc(sizeof(*rm), GFP_KERNEL); ++ ++ if (rm) { ++ INIT_LIST_HEAD(&rm->alloc_list); ++ rm->paddr = paddr; ++ rm->pages = pages; ++ } ++ ++ return rm; ++} ++ ++#if 0 ++static void omap_vram_free_region(struct vram_region *vr) ++{ ++ list_del(&vr->list); ++ kfree(vr); ++} ++#endif ++ ++static struct vram_alloc *omap_vram_create_allocation(struct vram_region *vr, ++ unsigned long paddr, unsigned pages) ++{ ++ struct vram_alloc *va; ++ struct vram_alloc *new; ++ ++ new = kzalloc(sizeof(*va), GFP_KERNEL); ++ ++ if (!new) ++ return NULL; ++ ++ new->paddr = paddr; ++ new->pages = pages; ++ ++ list_for_each_entry(va, &vr->alloc_list, list) { ++ if (va->paddr > new->paddr) ++ break; ++ } ++ ++ list_add_tail(&new->list, &va->list); ++ ++ return new; ++} ++ ++static void omap_vram_free_allocation(struct vram_alloc *va) ++{ ++ list_del(&va->list); ++ kfree(va); ++} ++ ++static __init int omap_vram_add_region_postponed(unsigned long paddr, ++ size_t size) ++{ ++ if (postponed_cnt == MAX_POSTPONED_REGIONS) ++ return -ENOMEM; ++ ++ postponed_regions[postponed_cnt].paddr = paddr; ++ postponed_regions[postponed_cnt].size = size; ++ ++ ++postponed_cnt; ++ ++ return 0; ++} ++ ++/* add/remove_region can be exported if there's need to add/remove regions ++ * runtime */ ++static int omap_vram_add_region(unsigned long paddr, size_t size) ++{ ++ struct vram_region *rm; ++ unsigned pages; ++ ++ DBG("adding region paddr %08lx size %d\n", ++ paddr, size); ++ ++ size &= PAGE_MASK; ++ pages = size >> PAGE_SHIFT; ++ ++ rm = omap_vram_create_region(paddr, pages); ++ if (rm == NULL) ++ return -ENOMEM; ++ ++ list_add(&rm->list, ®ion_list); ++ ++ return 0; ++} ++ ++int omap_vram_free(unsigned long paddr, size_t size) ++{ ++ struct vram_region *rm; ++ struct vram_alloc *alloc; ++ unsigned start, end; ++ ++ DBG("free mem paddr %08lx size %d\n", paddr, size); ++ ++ size = PAGE_ALIGN(size); ++ ++ mutex_lock(®ion_mutex); ++ ++ list_for_each_entry(rm, ®ion_list, list) { ++ list_for_each_entry(alloc, &rm->alloc_list, list) { ++ start = alloc->paddr; ++ end = alloc->paddr + (alloc->pages >> PAGE_SHIFT); ++ ++ if (start >= paddr && end < paddr + size) ++ goto found; ++ } ++ } ++ ++ mutex_unlock(®ion_mutex); ++ return -EINVAL; ++ ++found: ++ omap_vram_free_allocation(alloc); ++ ++ mutex_unlock(®ion_mutex); ++ return 0; ++} ++EXPORT_SYMBOL(omap_vram_free); ++ ++static int _omap_vram_reserve(unsigned long paddr, unsigned pages) ++{ ++ struct vram_region *rm; ++ struct vram_alloc *alloc; ++ size_t size; ++ ++ size = pages << PAGE_SHIFT; ++ ++ list_for_each_entry(rm, ®ion_list, list) { ++ unsigned long start, end; ++ ++ DBG("checking region %lx %d\n", rm->paddr, rm->pages); ++ ++ if (region_mem_type(rm->paddr) != region_mem_type(paddr)) ++ continue; ++ ++ start = rm->paddr; ++ end = start + (rm->pages << PAGE_SHIFT) - 1; ++ if (start > paddr || end < paddr + size - 1) ++ continue; ++ ++ DBG("block ok, checking allocs\n"); ++ ++ list_for_each_entry(alloc, &rm->alloc_list, list) { ++ end = alloc->paddr - 1; ++ ++ if (start <= paddr && end >= paddr + size - 1) ++ goto found; ++ ++ start = alloc->paddr + (alloc->pages << PAGE_SHIFT); ++ } ++ ++ end = rm->paddr + (rm->pages << PAGE_SHIFT) - 1; ++ ++ if (!(start <= paddr && end >= paddr + size - 1)) ++ continue; ++found: ++ DBG("FOUND area start %lx, end %lx\n", start, end); ++ ++ if (omap_vram_create_allocation(rm, paddr, pages) == NULL) ++ return -ENOMEM; ++ ++ return 0; ++ } ++ ++ return -ENOMEM; ++} ++ ++int omap_vram_reserve(unsigned long paddr, size_t size) ++{ ++ unsigned pages; ++ int r; ++ ++ DBG("reserve mem paddr %08lx size %d\n", paddr, size); ++ ++ size = PAGE_ALIGN(size); ++ pages = size >> PAGE_SHIFT; ++ ++ mutex_lock(®ion_mutex); ++ ++ r = _omap_vram_reserve(paddr, pages); ++ ++ mutex_unlock(®ion_mutex); ++ ++ return r; ++} ++EXPORT_SYMBOL(omap_vram_reserve); ++ ++static int _omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr) ++{ ++ struct vram_region *rm; ++ struct vram_alloc *alloc; ++ ++ list_for_each_entry(rm, ®ion_list, list) { ++ unsigned long start, end; ++ ++ DBG("checking region %lx %d\n", rm->paddr, rm->pages); ++ ++ if (region_mem_type(rm->paddr) != mtype) ++ continue; ++ ++ start = rm->paddr; ++ ++ list_for_each_entry(alloc, &rm->alloc_list, list) { ++ end = alloc->paddr; ++ ++ if (end - start >= pages << PAGE_SHIFT) ++ goto found; ++ ++ start = alloc->paddr + (alloc->pages << PAGE_SHIFT); ++ } ++ ++ end = rm->paddr + (rm->pages << PAGE_SHIFT); ++found: ++ if (end - start < pages << PAGE_SHIFT) ++ continue; ++ ++ DBG("FOUND %lx, end %lx\n", start, end); ++ ++ alloc = omap_vram_create_allocation(rm, start, pages); ++ if (alloc == NULL) ++ return -ENOMEM; ++ ++ *paddr = start; ++ ++ return 0; ++ } ++ ++ return -ENOMEM; ++} ++ ++int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr) ++{ ++ unsigned pages; ++ int r; ++ ++ BUG_ON(mtype > OMAPFB_MEMTYPE_MAX || !size); ++ ++ DBG("alloc mem type %d size %d\n", mtype, size); ++ ++ size = PAGE_ALIGN(size); ++ pages = size >> PAGE_SHIFT; ++ ++ mutex_lock(®ion_mutex); ++ ++ r = _omap_vram_alloc(mtype, pages, paddr); ++ ++ mutex_unlock(®ion_mutex); ++ ++ return r; ++} ++EXPORT_SYMBOL(omap_vram_alloc); ++ ++#ifdef CONFIG_PROC_FS ++static void *r_next(struct seq_file *m, void *v, loff_t *pos) ++{ ++ struct list_head *l = v; ++ ++ (*pos)++; ++ ++ if (list_is_last(l, ®ion_list)) ++ return NULL; ++ ++ return l->next; ++} ++ ++static void *r_start(struct seq_file *m, loff_t *pos) ++{ ++ loff_t p = *pos; ++ struct list_head *l = ®ion_list; ++ ++ mutex_lock(®ion_mutex); ++ ++ do { ++ l = l->next; ++ if (l == ®ion_list) ++ return NULL; ++ } while (p--); ++ ++ return l; ++} ++ ++static void r_stop(struct seq_file *m, void *v) ++{ ++ mutex_unlock(®ion_mutex); ++} ++ ++static int r_show(struct seq_file *m, void *v) ++{ ++ struct vram_region *vr; ++ struct vram_alloc *va; ++ unsigned size; ++ ++ vr = list_entry(v, struct vram_region, list); ++ ++ size = vr->pages << PAGE_SHIFT; ++ ++ seq_printf(m, "%08lx-%08lx (%d bytes)\n", ++ vr->paddr, vr->paddr + size - 1, ++ size); ++ ++ list_for_each_entry(va, &vr->alloc_list, list) { ++ size = va->pages << PAGE_SHIFT; ++ seq_printf(m, " %08lx-%08lx (%d bytes)\n", ++ va->paddr, va->paddr + size - 1, ++ size); ++ } ++ ++ ++ ++ return 0; ++} ++ ++static const struct seq_operations resource_op = { ++ .start = r_start, ++ .next = r_next, ++ .stop = r_stop, ++ .show = r_show, ++}; ++ ++static int vram_open(struct inode *inode, struct file *file) ++{ ++ return seq_open(file, &resource_op); ++} ++ ++static const struct file_operations proc_vram_operations = { ++ .open = vram_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = seq_release, ++}; ++ ++static int __init omap_vram_create_proc(void) ++{ ++ proc_create("omap-vram", 0, NULL, &proc_vram_operations); ++ ++ return 0; ++} ++#endif ++ ++static __init int omap_vram_init(void) ++{ ++ int i, r; ++ ++ for (i = 0; i < postponed_cnt; i++) ++ omap_vram_add_region(postponed_regions[i].paddr, ++ postponed_regions[i].size); ++ ++#ifdef CONFIG_PROC_FS ++ r = omap_vram_create_proc(); ++ if (r) ++ return -ENOMEM; ++#endif ++ ++ return 0; ++} ++ ++arch_initcall(omap_vram_init); ++ ++/* boottime vram alloc stuff */ ++ ++/* set from board file */ ++static u32 omapfb_sram_vram_start __initdata; ++static u32 omapfb_sram_vram_size __initdata; ++ ++/* set from board file */ ++static u32 omapfb_sdram_vram_start __initdata; ++static u32 omapfb_sdram_vram_size __initdata; ++ ++/* set from kernel cmdline */ ++static u32 omapfb_def_sdram_vram_size __initdata; ++static u32 omapfb_def_sdram_vram_start __initdata; ++ ++static void __init omapfb_early_vram(char **p) ++{ ++ omapfb_def_sdram_vram_size = memparse(*p, p); ++ if (**p == ',') ++ omapfb_def_sdram_vram_start = simple_strtoul((*p) + 1, p, 16); ++ ++ printk("omapfb_early_vram, %d, 0x%x\n", ++ omapfb_def_sdram_vram_size, ++ omapfb_def_sdram_vram_start); ++} ++__early_param("vram=", omapfb_early_vram); ++ ++/* ++ * Called from map_io. We need to call to this early enough so that we ++ * can reserve the fixed SDRAM regions before VM could get hold of them. ++ */ ++void __init omapfb_reserve_sdram(void) ++{ ++ struct bootmem_data *bdata; ++ unsigned long sdram_start, sdram_size; ++ u32 paddr; ++ u32 size = 0; ++ ++ /* cmdline arg overrides the board file definition */ ++ if (omapfb_def_sdram_vram_size) { ++ size = omapfb_def_sdram_vram_size; ++ paddr = omapfb_def_sdram_vram_start; ++ } ++ ++ if (!size) { ++ size = omapfb_sdram_vram_size; ++ paddr = omapfb_sdram_vram_start; ++ } ++ ++#ifdef CONFIG_OMAP2_DSS_VRAM_SIZE ++ if (!size) { ++ size = CONFIG_OMAP2_DSS_VRAM_SIZE * 1024 * 1024; ++ paddr = 0; ++ } ++#endif ++ ++ if (!size) ++ return; ++ ++ size = PAGE_ALIGN(size); ++ ++ bdata = NODE_DATA(0)->bdata; ++ sdram_start = bdata->node_min_pfn << PAGE_SHIFT; ++ sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start; ++ ++ if (paddr) { ++ if ((paddr & ~PAGE_MASK) || paddr < sdram_start || ++ paddr + size > sdram_start + sdram_size) { ++ printk(KERN_ERR "Illegal SDRAM region for VRAM\n"); ++ return; ++ } ++ ++ reserve_bootmem(paddr, size, BOOTMEM_DEFAULT); ++ } else { ++ if (size > sdram_size) { ++ printk(KERN_ERR "Illegal SDRAM size for VRAM\n"); ++ return; ++ } ++ ++ paddr = virt_to_phys(alloc_bootmem_pages(size)); ++ BUG_ON(paddr & ~PAGE_MASK); ++ } ++ ++ omap_vram_add_region_postponed(paddr, size); ++ ++ pr_info("Reserving %u bytes SDRAM for VRAM\n", size); ++} ++ ++/* ++ * Called at sram init time, before anything is pushed to the SRAM stack. ++ * Because of the stack scheme, we will allocate everything from the ++ * start of the lowest address region to the end of SRAM. This will also ++ * include padding for page alignment and possible holes between regions. ++ * ++ * As opposed to the SDRAM case, we'll also do any dynamic allocations at ++ * this point, since the driver built as a module would have problem with ++ * freeing / reallocating the regions. ++ */ ++unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart, ++ unsigned long sram_vstart, ++ unsigned long sram_size, ++ unsigned long pstart_avail, ++ unsigned long size_avail) ++{ ++ unsigned long pend_avail; ++ unsigned long reserved; ++ u32 paddr; ++ u32 size; ++ ++ paddr = omapfb_sram_vram_start; ++ size = omapfb_sram_vram_size; ++ ++ if (!size) ++ return 0; ++ ++ reserved = 0; ++ pend_avail = pstart_avail + size_avail; ++ ++ if (!paddr) { ++ /* Dynamic allocation */ ++ if ((size_avail & PAGE_MASK) < size) { ++ printk(KERN_ERR "Not enough SRAM for VRAM\n"); ++ return 0; ++ } ++ size_avail = (size_avail - size) & PAGE_MASK; ++ paddr = pstart_avail + size_avail; ++ } ++ ++ if (paddr < sram_pstart || ++ paddr + size > sram_pstart + sram_size) { ++ printk(KERN_ERR "Illegal SRAM region for VRAM\n"); ++ return 0; ++ } ++ ++ /* Reserve everything above the start of the region. */ ++ if (pend_avail - paddr > reserved) ++ reserved = pend_avail - paddr; ++ size_avail = pend_avail - reserved - pstart_avail; ++ ++ omap_vram_add_region_postponed(paddr, size); ++ ++ if (reserved) ++ pr_info("Reserving %lu bytes SRAM for VRAM\n", reserved); ++ ++ return reserved; ++} ++ ++void __init omap2_set_sdram_vram(u32 size, u32 start) ++{ ++ omapfb_sdram_vram_start = start; ++ omapfb_sdram_vram_size = size; ++} ++ ++void __init omap2_set_sram_vram(u32 size, u32 start) ++{ ++ omapfb_sram_vram_start = start; ++ omapfb_sram_vram_size = size; ++} ++ ++#endif ++ +diff --git a/arch/arm/plat-omap/vrfb.c b/arch/arm/plat-omap/vrfb.c +new file mode 100644 +index 0000000..7e0f8fc +--- /dev/null ++++ b/arch/arm/plat-omap/vrfb.c +@@ -0,0 +1,159 @@ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++/*#define DEBUG*/ ++ ++#ifdef DEBUG ++#define DBG(format, ...) printk(KERN_DEBUG "VRFB: " format, ## __VA_ARGS__) ++#else ++#define DBG(format, ...) ++#endif ++ ++#define SMS_ROT_VIRT_BASE(context, rot) \ ++ (((context >= 4) ? 0xD0000000 : 0x70000000) \ ++ | 0x4000000 * (context) \ ++ | 0x1000000 * (rot)) ++ ++#define OMAP_VRFB_SIZE (2048 * 2048 * 4) ++ ++#define VRFB_PAGE_WIDTH_EXP 5 /* Assuming SDRAM pagesize= 1024 */ ++#define VRFB_PAGE_HEIGHT_EXP 5 /* 1024 = 2^5 * 2^5 */ ++#define VRFB_PAGE_WIDTH (1 << VRFB_PAGE_WIDTH_EXP) ++#define VRFB_PAGE_HEIGHT (1 << VRFB_PAGE_HEIGHT_EXP) ++#define SMS_IMAGEHEIGHT_OFFSET 16 ++#define SMS_IMAGEWIDTH_OFFSET 0 ++#define SMS_PH_OFFSET 8 ++#define SMS_PW_OFFSET 4 ++#define SMS_PS_OFFSET 0 ++ ++#define OMAP_SMS_BASE 0x6C000000 ++#define SMS_ROT_CONTROL(context) (OMAP_SMS_BASE + 0x180 + 0x10 * context) ++#define SMS_ROT_SIZE(context) (OMAP_SMS_BASE + 0x184 + 0x10 * context) ++#define SMS_ROT_PHYSICAL_BA(context) (OMAP_SMS_BASE + 0x188 + 0x10 * context) ++ ++#define VRFB_NUM_CTXS 12 ++/* bitmap of reserved contexts */ ++static unsigned ctx_map; ++ ++void omap_vrfb_adjust_size(u16 *width, u16 *height, ++ u8 bytespp) ++{ ++ *width = ALIGN(*width * bytespp, VRFB_PAGE_WIDTH) / bytespp; ++ *height = ALIGN(*height, VRFB_PAGE_HEIGHT); ++} ++EXPORT_SYMBOL(omap_vrfb_adjust_size); ++ ++void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, ++ u16 width, u16 height, ++ u8 bytespp) ++{ ++ unsigned pixel_size_exp; ++ u16 vrfb_width; ++ u16 vrfb_height; ++ u8 ctx = vrfb->context; ++ ++ DBG("omapfb_set_vrfb(%d, %lx, %dx%d, %d)\n", ctx, paddr, ++ width, height, bytespp); ++ ++ if (bytespp == 4) ++ pixel_size_exp = 2; ++ else if (bytespp == 2) ++ pixel_size_exp = 1; ++ else ++ BUG(); ++ ++ vrfb_width = ALIGN(width * bytespp, VRFB_PAGE_WIDTH) / bytespp; ++ vrfb_height = ALIGN(height, VRFB_PAGE_HEIGHT); ++ ++ DBG("vrfb w %u, h %u\n", vrfb_width, vrfb_height); ++ ++ omap_writel(paddr, SMS_ROT_PHYSICAL_BA(ctx)); ++ omap_writel((vrfb_width << SMS_IMAGEWIDTH_OFFSET) | ++ (vrfb_height << SMS_IMAGEHEIGHT_OFFSET), ++ SMS_ROT_SIZE(ctx)); ++ ++ omap_writel(pixel_size_exp << SMS_PS_OFFSET | ++ VRFB_PAGE_WIDTH_EXP << SMS_PW_OFFSET | ++ VRFB_PAGE_HEIGHT_EXP << SMS_PH_OFFSET, ++ SMS_ROT_CONTROL(ctx)); ++ ++ DBG("vrfb offset pixels %d, %d\n", ++ vrfb_width - width, vrfb_height - height); ++ ++ vrfb->xoffset = vrfb_width - width; ++ vrfb->yoffset = vrfb_height - height; ++ vrfb->bytespp = bytespp; ++} ++EXPORT_SYMBOL(omap_vrfb_setup); ++ ++void omap_vrfb_release_ctx(struct vrfb *vrfb) ++{ ++ int rot; ++ ++ if (vrfb->context == 0xff) ++ return; ++ ++ DBG("release ctx %d\n", vrfb->context); ++ ++ ctx_map &= ~(1 << vrfb->context); ++ ++ for (rot = 0; rot < 4; ++rot) { ++ if(vrfb->paddr[rot]) { ++ release_mem_region(vrfb->paddr[rot], OMAP_VRFB_SIZE); ++ vrfb->paddr[rot] = 0; ++ } ++ } ++ ++ vrfb->context = 0xff; ++} ++EXPORT_SYMBOL(omap_vrfb_release_ctx); ++ ++int omap_vrfb_request_ctx(struct vrfb *vrfb) ++{ ++ int rot; ++ u32 paddr; ++ u8 ctx; ++ ++ DBG("request ctx\n"); ++ ++ for (ctx = 0; ctx < VRFB_NUM_CTXS; ++ctx) ++ if ((ctx_map & (1 << ctx)) == 0) ++ break; ++ ++ if (ctx == VRFB_NUM_CTXS) { ++ printk(KERN_ERR "vrfb: no free contexts\n"); ++ return -EBUSY; ++ } ++ ++ DBG("found free ctx %d\n", ctx); ++ ++ ctx_map |= 1 << ctx; ++ ++ memset(vrfb, 0, sizeof(*vrfb)); ++ ++ vrfb->context = ctx; ++ ++ for (rot = 0; rot < 4; ++rot) { ++ paddr = SMS_ROT_VIRT_BASE(ctx, rot); ++ if (!request_mem_region(paddr, OMAP_VRFB_SIZE, "vrfb")) { ++ printk(KERN_ERR "vrfb: failed to reserve VRFB " ++ "area for ctx %d, rotation %d\n", ++ ctx, rot * 90); ++ omap_vrfb_release_ctx(vrfb); ++ return -ENOMEM; ++ } ++ ++ vrfb->paddr[rot] = paddr; ++ ++ DBG("VRFB %d/%d: %lx\n", ctx, rot*90, vrfb->paddr[rot]); ++ } ++ ++ return 0; ++} ++EXPORT_SYMBOL(omap_vrfb_request_ctx); ++ +diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig +index fb19803..8b3752b 100644 +--- a/drivers/video/Kconfig ++++ b/drivers/video/Kconfig +@@ -2132,6 +2132,7 @@ config FB_MX3 + an LCD display with your i.MX31 system, say Y here. + + source "drivers/video/omap/Kconfig" ++source "drivers/video/omap2/Kconfig" + + source "drivers/video/backlight/Kconfig" + source "drivers/video/display/Kconfig" +diff --git a/drivers/video/Makefile b/drivers/video/Makefile +index 2a998ca..1db8dd4 100644 +--- a/drivers/video/Makefile ++++ b/drivers/video/Makefile +@@ -120,6 +120,7 @@ obj-$(CONFIG_FB_SM501) += sm501fb.o + obj-$(CONFIG_FB_XILINX) += xilinxfb.o + obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o + obj-$(CONFIG_FB_OMAP) += omap/ ++obj-$(CONFIG_OMAP2_DSS) += omap2/ + obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o + obj-$(CONFIG_FB_CARMINE) += carminefb.o + obj-$(CONFIG_FB_MB862XX) += mb862xx/ +diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig +new file mode 100644 +index 0000000..89bf210 +--- /dev/null ++++ b/drivers/video/omap2/Kconfig +@@ -0,0 +1,3 @@ ++source "drivers/video/omap2/dss/Kconfig" ++source "drivers/video/omap2/displays/Kconfig" ++source "drivers/video/omap2/omapfb/Kconfig" +diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile +new file mode 100644 +index 0000000..72134db +--- /dev/null ++++ b/drivers/video/omap2/Makefile +@@ -0,0 +1,4 @@ ++# OMAP2/3 Display Subsystem ++obj-y += dss/ ++obj-y += displays/ ++obj-y += omapfb/ +diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig +new file mode 100644 +index 0000000..f2ce068 +--- /dev/null ++++ b/drivers/video/omap2/dss/Kconfig +@@ -0,0 +1,89 @@ ++menuconfig OMAP2_DSS ++ tristate "OMAP2/3 Display Subsystem support (EXPERIMENTAL)" ++ depends on ARCH_OMAP2 || ARCH_OMAP3 ++ help ++ OMAP2/3 Display Subsystem support. ++ ++if OMAP2_DSS ++ ++config OMAP2_DSS_VRAM_SIZE ++ int "VRAM size (MB)" ++ range 0 32 ++ default 4 ++ help ++ The amount of SDRAM to reserve at boot time for video RAM use. ++ This VRAM will be used by omapfb and other drivers that need ++ large continuous RAM area for video use. ++ ++ You can also set this with "vram=" kernel argument, or ++ in the board file. ++ ++config OMAP2_DSS_DEBUG_SUPPORT ++ bool "Debug support" ++ default y ++ help ++ This enables debug messages. You need to enable printing ++ with 'debug' module parameter. ++ ++config OMAP2_DSS_RFBI ++ bool "RFBI support" ++ default n ++ help ++ MIPI DBI, or RFBI (Remote Framebuffer Interface), support. ++ ++config OMAP2_DSS_VENC ++ bool "VENC support" ++ default y ++ help ++ OMAP Video Encoder support. ++ ++config OMAP2_DSS_SDI ++ bool "SDI support" ++ depends on ARCH_OMAP3 ++ default n ++ help ++ SDI (Serial Display Interface) support. ++ ++config OMAP2_DSS_DSI ++ bool "DSI support" ++ depends on ARCH_OMAP3 ++ default n ++ help ++ MIPI DSI support. ++ ++config OMAP2_DSS_USE_DSI_PLL ++ bool "Use DSI PLL for PCLK (EXPERIMENTAL)" ++ default n ++ depends on OMAP2_DSS_DSI ++ help ++ Use DSI PLL to generate pixel clock. Currently only for DPI output. ++ DSI PLL can be used to generate higher and more precise pixel clocks. ++ ++config OMAP2_DSS_FAKE_VSYNC ++ bool "Fake VSYNC irq from manual update displays" ++ default n ++ help ++ If this is selected, DSI will generate a fake DISPC VSYNC interrupt ++ when DSI has sent a frame. This is only needed with DSI or RFBI ++ displays using manual mode, and you want VSYNC to, for example, ++ time animation. ++ ++config OMAP2_DSS_MIN_FCK_PER_PCK ++ int "Minimum FCK/PCK ratio (for scaling)" ++ range 0 32 ++ default 0 ++ help ++ This can be used to adjust the minimum FCK/PCK ratio. ++ ++ With this you can make sure that DISPC FCK is at least ++ n x PCK. Video plane scaling requires higher FCK than ++ normally. ++ ++ If this is set to 0, there's no extra constraint on the ++ DISPC FCK. However, the FCK will at minimum be ++ 2xPCK (if active matrix) or 3xPCK (if passive matrix). ++ ++ Max FCK is 173MHz, so this doesn't work if your PCK ++ is very high. ++ ++endif +diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile +new file mode 100644 +index 0000000..980c72c +--- /dev/null ++++ b/drivers/video/omap2/dss/Makefile +@@ -0,0 +1,6 @@ ++obj-$(CONFIG_OMAP2_DSS) += omapdss.o ++omapdss-y := core.o dss.o dispc.o dpi.o display.o manager.o overlay.o ++omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o ++omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o ++omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o ++omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o +diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c +new file mode 100644 +index 0000000..ae7cd06 +--- /dev/null ++++ b/drivers/video/omap2/dss/core.c +@@ -0,0 +1,641 @@ ++/* ++ * linux/drivers/video/omap2/dss/core.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "CORE" ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "dss.h" ++ ++static struct { ++ struct platform_device *pdev; ++ unsigned ctx_id; ++ ++ struct clk *dss_ick; ++ struct clk *dss1_fck; ++ struct clk *dss2_fck; ++ struct clk *dss_54m_fck; ++ struct clk *dss_96m_fck; ++ unsigned num_clks_enabled; ++} core; ++ ++static void dss_clk_enable_all_no_ctx(void); ++static void dss_clk_disable_all_no_ctx(void); ++static void dss_clk_enable_no_ctx(enum dss_clock clks); ++static void dss_clk_disable_no_ctx(enum dss_clock clks); ++ ++static char *def_disp_name; ++module_param_named(def_disp, def_disp_name, charp, 0); ++MODULE_PARM_DESC(def_disp_name, "default display name"); ++ ++#ifdef DEBUG ++unsigned int dss_debug; ++module_param_named(debug, dss_debug, bool, 0644); ++#endif ++ ++/* CONTEXT */ ++static unsigned dss_get_ctx_id(void) ++{ ++ struct omap_dss_board_info *pdata = core.pdev->dev.platform_data; ++ ++ if (!pdata->get_last_off_on_transaction_id) ++ return 0; ++ ++ return pdata->get_last_off_on_transaction_id(&core.pdev->dev); ++} ++ ++int dss_need_ctx_restore(void) ++{ ++ int id = dss_get_ctx_id(); ++ ++ if (id != core.ctx_id) { ++ DSSDBG("ctx id %u -> id %u\n", ++ core.ctx_id, id); ++ core.ctx_id = id; ++ return 1; ++ } else { ++ return 0; ++ } ++} ++ ++static void save_all_ctx(void) ++{ ++ DSSDBG("save context\n"); ++ ++ dss_clk_enable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ dss_save_context(); ++ dispc_save_context(); ++#ifdef CONFIG_OMAP2_DSS_DSI ++ dsi_save_context(); ++#endif ++ ++ dss_clk_disable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1); ++} ++ ++static void restore_all_ctx(void) ++{ ++ DSSDBG("restore context\n"); ++ ++ dss_clk_enable_all_no_ctx(); ++ ++ dss_restore_context(); ++ dispc_restore_context(); ++#ifdef CONFIG_OMAP2_DSS_DSI ++ dsi_restore_context(); ++#endif ++ ++ dss_clk_disable_all_no_ctx(); ++} ++ ++/* CLOCKS */ ++void dss_dump_clocks(struct seq_file *s) ++{ ++ int i; ++ struct clk *clocks[5] = { ++ core.dss_ick, ++ core.dss1_fck, ++ core.dss2_fck, ++ core.dss_54m_fck, ++ core.dss_96m_fck ++ }; ++ ++ seq_printf(s, "- dss -\n"); ++ ++ seq_printf(s, "internal clk count\t%u\n", core.num_clks_enabled); ++ ++ for (i = 0; i < 5; i++) { ++ if (!clocks[i]) ++ continue; ++ seq_printf(s, "%-15s\t%lu\t%d\n", ++ clocks[i]->name, ++ clk_get_rate(clocks[i]), ++ clocks[i]->usecount); ++ } ++} ++ ++static int dss_get_clocks(void) ++{ ++ const struct { ++ struct clk **clock; ++ char *omap2_name; ++ char *omap3_name; ++ } clocks[5] = { ++ { &core.dss_ick, "dss_ick", "dss_ick" }, /* L3 & L4 ick */ ++ { &core.dss1_fck, "dss1_fck", "dss1_alwon_fck" }, ++ { &core.dss2_fck, "dss2_fck", "dss2_alwon_fck" }, ++ { &core.dss_54m_fck, "dss_54m_fck", "dss_tv_fck" }, ++ { &core.dss_96m_fck, NULL, "dss_96m_fck" }, ++ }; ++ ++ int r = 0; ++ int i; ++ const int num_clocks = 5; ++ ++ for (i = 0; i < num_clocks; i++) ++ *clocks[i].clock = NULL; ++ ++ for (i = 0; i < num_clocks; i++) { ++ struct clk *clk; ++ const char *clk_name; ++ ++ clk_name = cpu_is_omap34xx() ? clocks[i].omap3_name ++ : clocks[i].omap2_name; ++ ++ if (!clk_name) ++ continue; ++ ++ clk = clk_get(NULL, clk_name); ++ ++ if (IS_ERR(clk)) { ++ DSSERR("can't get clock %s", clk_name); ++ r = PTR_ERR(clk); ++ goto err; ++ } ++ ++ DSSDBG("clk %s, rate %ld\n", ++ clk_name, clk_get_rate(clk)); ++ ++ *clocks[i].clock = clk; ++ } ++ ++ return 0; ++ ++err: ++ for (i = 0; i < num_clocks; i++) { ++ if (!IS_ERR(*clocks[i].clock)) ++ clk_put(*clocks[i].clock); ++ } ++ ++ return r; ++} ++ ++static void dss_put_clocks(void) ++{ ++ if (core.dss_96m_fck) ++ clk_put(core.dss_96m_fck); ++ clk_put(core.dss_54m_fck); ++ clk_put(core.dss1_fck); ++ clk_put(core.dss2_fck); ++ clk_put(core.dss_ick); ++} ++ ++unsigned long dss_clk_get_rate(enum dss_clock clk) ++{ ++ switch (clk) { ++ case DSS_CLK_ICK: ++ return clk_get_rate(core.dss_ick); ++ case DSS_CLK_FCK1: ++ return clk_get_rate(core.dss1_fck); ++ case DSS_CLK_FCK2: ++ return clk_get_rate(core.dss2_fck); ++ case DSS_CLK_54M: ++ return clk_get_rate(core.dss_54m_fck); ++ case DSS_CLK_96M: ++ return clk_get_rate(core.dss_96m_fck); ++ } ++ ++ BUG(); ++ return 0; ++} ++ ++static unsigned count_clk_bits(enum dss_clock clks) ++{ ++ unsigned num_clks = 0; ++ ++ if (clks & DSS_CLK_ICK) ++ ++num_clks; ++ if (clks & DSS_CLK_FCK1) ++ ++num_clks; ++ if (clks & DSS_CLK_FCK2) ++ ++num_clks; ++ if (clks & DSS_CLK_54M) ++ ++num_clks; ++ if (clks & DSS_CLK_96M) ++ ++num_clks; ++ ++ return num_clks; ++} ++ ++static void dss_clk_enable_no_ctx(enum dss_clock clks) ++{ ++ unsigned num_clks = count_clk_bits(clks); ++ ++ if (clks & DSS_CLK_ICK) ++ clk_enable(core.dss_ick); ++ if (clks & DSS_CLK_FCK1) ++ clk_enable(core.dss1_fck); ++ if (clks & DSS_CLK_FCK2) ++ clk_enable(core.dss2_fck); ++ if (clks & DSS_CLK_54M) ++ clk_enable(core.dss_54m_fck); ++ if (clks & DSS_CLK_96M) ++ clk_enable(core.dss_96m_fck); ++ ++ core.num_clks_enabled += num_clks; ++} ++ ++void dss_clk_enable(enum dss_clock clks) ++{ ++ dss_clk_enable_no_ctx(clks); ++ ++ if (cpu_is_omap34xx() && dss_need_ctx_restore()) ++ restore_all_ctx(); ++} ++ ++static void dss_clk_disable_no_ctx(enum dss_clock clks) ++{ ++ unsigned num_clks = count_clk_bits(clks); ++ ++ if (clks & DSS_CLK_ICK) ++ clk_disable(core.dss_ick); ++ if (clks & DSS_CLK_FCK1) ++ clk_disable(core.dss1_fck); ++ if (clks & DSS_CLK_FCK2) ++ clk_disable(core.dss2_fck); ++ if (clks & DSS_CLK_54M) ++ clk_disable(core.dss_54m_fck); ++ if (clks & DSS_CLK_96M) ++ clk_disable(core.dss_96m_fck); ++ ++ core.num_clks_enabled -= num_clks; ++} ++ ++void dss_clk_disable(enum dss_clock clks) ++{ ++ if (cpu_is_omap34xx()) { ++ unsigned num_clks = count_clk_bits(clks); ++ ++ BUG_ON(core.num_clks_enabled < num_clks); ++ ++ if (core.num_clks_enabled == num_clks) ++ save_all_ctx(); ++ } ++ ++ dss_clk_disable_no_ctx(clks); ++} ++ ++static void dss_clk_enable_all_no_ctx(void) ++{ ++ enum dss_clock clks; ++ ++ clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; ++ if (cpu_is_omap34xx()) ++ clks |= DSS_CLK_96M; ++ dss_clk_enable_no_ctx(clks); ++} ++ ++static void dss_clk_disable_all_no_ctx(void) ++{ ++ enum dss_clock clks; ++ ++ clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; ++ if (cpu_is_omap34xx()) ++ clks |= DSS_CLK_96M; ++ dss_clk_disable_no_ctx(clks); ++} ++ ++static void dss_clk_disable_all(void) ++{ ++ enum dss_clock clks; ++ ++ clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M; ++ if (cpu_is_omap34xx()) ++ clks |= DSS_CLK_96M; ++ dss_clk_disable(clks); ++} ++ ++/* DEBUGFS */ ++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) ++static void dss_debug_dump_clocks(struct seq_file *s) ++{ ++ dss_dump_clocks(s); ++ dispc_dump_clocks(s); ++#ifdef CONFIG_OMAP2_DSS_DSI ++ dsi_dump_clocks(s); ++#endif ++} ++ ++static int dss_debug_show(struct seq_file *s, void *unused) ++{ ++ void (*func)(struct seq_file *) = s->private; ++ func(s); ++ return 0; ++} ++ ++static int dss_debug_open(struct inode *inode, struct file *file) ++{ ++ return single_open(file, dss_debug_show, inode->i_private); ++} ++ ++static const struct file_operations dss_debug_fops = { ++ .open = dss_debug_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++}; ++ ++static struct dentry *dss_debugfs_dir; ++ ++static int dss_initialize_debugfs(void) ++{ ++ dss_debugfs_dir = debugfs_create_dir("omapdss", NULL); ++ if (IS_ERR(dss_debugfs_dir)) { ++ int err = PTR_ERR(dss_debugfs_dir); ++ dss_debugfs_dir = NULL; ++ return err; ++ } ++ ++ debugfs_create_file("clk", S_IRUGO, dss_debugfs_dir, ++ &dss_debug_dump_clocks, &dss_debug_fops); ++ ++ debugfs_create_file("dss", S_IRUGO, dss_debugfs_dir, ++ &dss_dump_regs, &dss_debug_fops); ++ debugfs_create_file("dispc", S_IRUGO, dss_debugfs_dir, ++ &dispc_dump_regs, &dss_debug_fops); ++#ifdef CONFIG_OMAP2_DSS_RFBI ++ debugfs_create_file("rfbi", S_IRUGO, dss_debugfs_dir, ++ &rfbi_dump_regs, &dss_debug_fops); ++#endif ++#ifdef CONFIG_OMAP2_DSS_DSI ++ debugfs_create_file("dsi", S_IRUGO, dss_debugfs_dir, ++ &dsi_dump_regs, &dss_debug_fops); ++#endif ++ return 0; ++} ++ ++static void dss_uninitialize_debugfs(void) ++{ ++ if (dss_debugfs_dir) ++ debugfs_remove_recursive(dss_debugfs_dir); ++} ++#endif /* CONFIG_DEBUG_FS && CONFIG_OMAP2_DSS_DEBUG_SUPPORT */ ++ ++ ++/* DSI powers */ ++int dss_dsi_power_up(void) ++{ ++ struct omap_dss_board_info *pdata = core.pdev->dev.platform_data; ++ ++ if (!pdata->dsi_power_up) ++ return 0; /* presume power is always on then */ ++ ++ return pdata->dsi_power_up(); ++} ++ ++void dss_dsi_power_down(void) ++{ ++ struct omap_dss_board_info *pdata = core.pdev->dev.platform_data; ++ ++ if (!pdata->dsi_power_down) ++ return; ++ ++ pdata->dsi_power_down(); ++} ++ ++ ++ ++/* PLATFORM DEVICE */ ++static int omap_dss_probe(struct platform_device *pdev) ++{ ++ int skip_init = 0; ++ int r; ++ ++ core.pdev = pdev; ++ ++ r = dss_get_clocks(); ++ if (r) ++ goto fail0; ++ ++ dss_clk_enable_all_no_ctx(); ++ ++ core.ctx_id = dss_get_ctx_id(); ++ DSSDBG("initial ctx id %u\n", core.ctx_id); ++ ++#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT ++ /* DISPC_CONTROL */ ++ if (omap_readl(0x48050440) & 1) /* LCD enabled? */ ++ skip_init = 1; ++#endif ++ ++ r = dss_init(skip_init); ++ if (r) { ++ DSSERR("Failed to initialize DSS\n"); ++ goto fail0; ++ } ++ ++#ifdef CONFIG_OMAP2_DSS_RFBI ++ r = rfbi_init(); ++ if (r) { ++ DSSERR("Failed to initialize rfbi\n"); ++ goto fail0; ++ } ++#endif ++ ++ r = dpi_init(); ++ if (r) { ++ DSSERR("Failed to initialize dpi\n"); ++ goto fail0; ++ } ++ ++ r = dispc_init(); ++ if (r) { ++ DSSERR("Failed to initialize dispc\n"); ++ goto fail0; ++ } ++#ifdef CONFIG_OMAP2_DSS_VENC ++ r = venc_init(); ++ if (r) { ++ DSSERR("Failed to initialize venc\n"); ++ goto fail0; ++ } ++#endif ++ if (cpu_is_omap34xx()) { ++#ifdef CONFIG_OMAP2_DSS_SDI ++ r = sdi_init(skip_init); ++ if (r) { ++ DSSERR("Failed to initialize SDI\n"); ++ goto fail0; ++ } ++#endif ++#ifdef CONFIG_OMAP2_DSS_DSI ++ r = dsi_init(); ++ if (r) { ++ DSSERR("Failed to initialize DSI\n"); ++ goto fail0; ++ } ++#endif ++ } ++ ++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) ++ r = dss_initialize_debugfs(); ++ if (r) ++ goto fail0; ++#endif ++ ++ dss_init_displays(pdev); ++ dss_init_overlay_managers(pdev); ++ dss_init_overlays(pdev, def_disp_name); ++ ++ dss_clk_disable_all(); ++ ++ return 0; ++ ++ /* XXX fail correctly */ ++fail0: ++ return r; ++} ++ ++static int omap_dss_remove(struct platform_device *pdev) ++{ ++ int c; ++ ++ dss_uninit_overlays(pdev); ++ dss_uninit_overlay_managers(pdev); ++ dss_uninit_displays(pdev); ++ ++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT) ++ dss_uninitialize_debugfs(); ++#endif ++ ++#ifdef CONFIG_OMAP2_DSS_VENC ++ venc_exit(); ++#endif ++ dispc_exit(); ++ dpi_exit(); ++#ifdef CONFIG_OMAP2_DSS_RFBI ++ rfbi_exit(); ++#endif ++ if (cpu_is_omap34xx()) { ++#ifdef CONFIG_OMAP2_DSS_DSI ++ dsi_exit(); ++#endif ++#ifdef CONFIG_OMAP2_DSS_SDI ++ sdi_exit(); ++#endif ++ } ++ ++ dss_exit(); ++ ++ /* these should be removed at some point */ ++ c = core.dss_ick->usecount; ++ if (c > 0) { ++ DSSERR("warning: dss_ick usecount %d, disabling\n", c); ++ while (c-- > 0) ++ clk_disable(core.dss_ick); ++ } ++ ++ c = core.dss1_fck->usecount; ++ if (c > 0) { ++ DSSERR("warning: dss1_fck usecount %d, disabling\n", c); ++ while (c-- > 0) ++ clk_disable(core.dss1_fck); ++ } ++ ++ c = core.dss2_fck->usecount; ++ if (c > 0) { ++ DSSERR("warning: dss2_fck usecount %d, disabling\n", c); ++ while (c-- > 0) ++ clk_disable(core.dss2_fck); ++ } ++ ++ c = core.dss_54m_fck->usecount; ++ if (c > 0) { ++ DSSERR("warning: dss_54m_fck usecount %d, disabling\n", c); ++ while (c-- > 0) ++ clk_disable(core.dss_54m_fck); ++ } ++ ++ if (core.dss_96m_fck) { ++ c = core.dss_96m_fck->usecount; ++ if (c > 0) { ++ DSSERR("warning: dss_96m_fck usecount %d, disabling\n", ++ c); ++ while (c-- > 0) ++ clk_disable(core.dss_96m_fck); ++ } ++ } ++ ++ dss_put_clocks(); ++ ++ return 0; ++} ++ ++static void omap_dss_shutdown(struct platform_device *pdev) ++{ ++ DSSDBG("shutdown\n"); ++} ++ ++static int omap_dss_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ DSSDBG("suspend %d\n", state.event); ++ ++ return dss_suspend_all_displays(); ++} ++ ++static int omap_dss_resume(struct platform_device *pdev) ++{ ++ DSSDBG("resume\n"); ++ ++ return dss_resume_all_displays(); ++} ++ ++static struct platform_driver omap_dss_driver = { ++ .probe = omap_dss_probe, ++ .remove = omap_dss_remove, ++ .shutdown = omap_dss_shutdown, ++ .suspend = omap_dss_suspend, ++ .resume = omap_dss_resume, ++ .driver = { ++ .name = "omapdss", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init omap_dss_init(void) ++{ ++ return platform_driver_register(&omap_dss_driver); ++} ++ ++static void __exit omap_dss_exit(void) ++{ ++ platform_driver_unregister(&omap_dss_driver); ++} ++ ++subsys_initcall(omap_dss_init); ++module_exit(omap_dss_exit); ++ ++ ++MODULE_AUTHOR("Tomi Valkeinen "); ++MODULE_DESCRIPTION("OMAP2/3 Display Subsystem"); ++MODULE_LICENSE("GPL v2"); ++ +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +new file mode 100644 +index 0000000..ffb5648 +--- /dev/null ++++ b/drivers/video/omap2/dss/dispc.c +@@ -0,0 +1,2968 @@ ++/* ++ * linux/drivers/video/omap2/dss/dispc.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "DISPC" ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++ ++#include "dss.h" ++ ++/* DISPC */ ++#define DISPC_BASE 0x48050400 ++ ++#define DISPC_SZ_REGS SZ_1K ++ ++struct dispc_reg { u16 idx; }; ++ ++#define DISPC_REG(idx) ((const struct dispc_reg) { idx }) ++ ++/* DISPC common */ ++#define DISPC_REVISION DISPC_REG(0x0000) ++#define DISPC_SYSCONFIG DISPC_REG(0x0010) ++#define DISPC_SYSSTATUS DISPC_REG(0x0014) ++#define DISPC_IRQSTATUS DISPC_REG(0x0018) ++#define DISPC_IRQENABLE DISPC_REG(0x001C) ++#define DISPC_CONTROL DISPC_REG(0x0040) ++#define DISPC_CONFIG DISPC_REG(0x0044) ++#define DISPC_CAPABLE DISPC_REG(0x0048) ++#define DISPC_DEFAULT_COLOR0 DISPC_REG(0x004C) ++#define DISPC_DEFAULT_COLOR1 DISPC_REG(0x0050) ++#define DISPC_TRANS_COLOR0 DISPC_REG(0x0054) ++#define DISPC_TRANS_COLOR1 DISPC_REG(0x0058) ++#define DISPC_LINE_STATUS DISPC_REG(0x005C) ++#define DISPC_LINE_NUMBER DISPC_REG(0x0060) ++#define DISPC_TIMING_H DISPC_REG(0x0064) ++#define DISPC_TIMING_V DISPC_REG(0x0068) ++#define DISPC_POL_FREQ DISPC_REG(0x006C) ++#define DISPC_DIVISOR DISPC_REG(0x0070) ++#define DISPC_GLOBAL_ALPHA DISPC_REG(0x0074) ++#define DISPC_SIZE_DIG DISPC_REG(0x0078) ++#define DISPC_SIZE_LCD DISPC_REG(0x007C) ++ ++/* DISPC GFX plane */ ++#define DISPC_GFX_BA0 DISPC_REG(0x0080) ++#define DISPC_GFX_BA1 DISPC_REG(0x0084) ++#define DISPC_GFX_POSITION DISPC_REG(0x0088) ++#define DISPC_GFX_SIZE DISPC_REG(0x008C) ++#define DISPC_GFX_ATTRIBUTES DISPC_REG(0x00A0) ++#define DISPC_GFX_FIFO_THRESHOLD DISPC_REG(0x00A4) ++#define DISPC_GFX_FIFO_SIZE_STATUS DISPC_REG(0x00A8) ++#define DISPC_GFX_ROW_INC DISPC_REG(0x00AC) ++#define DISPC_GFX_PIXEL_INC DISPC_REG(0x00B0) ++#define DISPC_GFX_WINDOW_SKIP DISPC_REG(0x00B4) ++#define DISPC_GFX_TABLE_BA DISPC_REG(0x00B8) ++ ++#define DISPC_DATA_CYCLE1 DISPC_REG(0x01D4) ++#define DISPC_DATA_CYCLE2 DISPC_REG(0x01D8) ++#define DISPC_DATA_CYCLE3 DISPC_REG(0x01DC) ++ ++#define DISPC_CPR_COEF_R DISPC_REG(0x0220) ++#define DISPC_CPR_COEF_G DISPC_REG(0x0224) ++#define DISPC_CPR_COEF_B DISPC_REG(0x0228) ++ ++#define DISPC_GFX_PRELOAD DISPC_REG(0x022C) ++ ++/* DISPC Video plane, n = 0 for VID1 and n = 1 for VID2 */ ++#define DISPC_VID_REG(n, idx) DISPC_REG(0x00BC + (n)*0x90 + idx) ++ ++#define DISPC_VID_BA0(n) DISPC_VID_REG(n, 0x0000) ++#define DISPC_VID_BA1(n) DISPC_VID_REG(n, 0x0004) ++#define DISPC_VID_POSITION(n) DISPC_VID_REG(n, 0x0008) ++#define DISPC_VID_SIZE(n) DISPC_VID_REG(n, 0x000C) ++#define DISPC_VID_ATTRIBUTES(n) DISPC_VID_REG(n, 0x0010) ++#define DISPC_VID_FIFO_THRESHOLD(n) DISPC_VID_REG(n, 0x0014) ++#define DISPC_VID_FIFO_SIZE_STATUS(n) DISPC_VID_REG(n, 0x0018) ++#define DISPC_VID_ROW_INC(n) DISPC_VID_REG(n, 0x001C) ++#define DISPC_VID_PIXEL_INC(n) DISPC_VID_REG(n, 0x0020) ++#define DISPC_VID_FIR(n) DISPC_VID_REG(n, 0x0024) ++#define DISPC_VID_PICTURE_SIZE(n) DISPC_VID_REG(n, 0x0028) ++#define DISPC_VID_ACCU0(n) DISPC_VID_REG(n, 0x002C) ++#define DISPC_VID_ACCU1(n) DISPC_VID_REG(n, 0x0030) ++ ++/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ ++#define DISPC_VID_FIR_COEF_H(n, i) DISPC_REG(0x00F0 + (n)*0x90 + (i)*0x8) ++/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ ++#define DISPC_VID_FIR_COEF_HV(n, i) DISPC_REG(0x00F4 + (n)*0x90 + (i)*0x8) ++/* coef index i = {0, 1, 2, 3, 4} */ ++#define DISPC_VID_CONV_COEF(n, i) DISPC_REG(0x0130 + (n)*0x90 + (i)*0x4) ++/* coef index i = {0, 1, 2, 3, 4, 5, 6, 7} */ ++#define DISPC_VID_FIR_COEF_V(n, i) DISPC_REG(0x01E0 + (n)*0x20 + (i)*0x4) ++ ++#define DISPC_VID_PRELOAD(n) DISPC_REG(0x230 + (n)*0x04) ++ ++ ++#define DISPC_IRQ_MASK_ERROR (DISPC_IRQ_GFX_FIFO_UNDERFLOW | \ ++ DISPC_IRQ_OCP_ERR | \ ++ DISPC_IRQ_VID1_FIFO_UNDERFLOW | \ ++ DISPC_IRQ_VID2_FIFO_UNDERFLOW | \ ++ DISPC_IRQ_SYNC_LOST | \ ++ DISPC_IRQ_SYNC_LOST_DIGIT) ++ ++#define DISPC_MAX_NR_ISRS 8 ++ ++struct omap_dispc_isr_data { ++ omap_dispc_isr_t isr; ++ void *arg; ++ u32 mask; ++}; ++ ++#define REG_GET(idx, start, end) \ ++ FLD_GET(dispc_read_reg(idx), start, end) ++ ++#define REG_FLD_MOD(idx, val, start, end) \ ++ dispc_write_reg(idx, FLD_MOD(dispc_read_reg(idx), val, start, end)) ++ ++static const struct dispc_reg dispc_reg_att[] = { DISPC_GFX_ATTRIBUTES, ++ DISPC_VID_ATTRIBUTES(0), ++ DISPC_VID_ATTRIBUTES(1) }; ++ ++static struct { ++ void __iomem *base; ++ ++ struct clk *dpll4_m4_ck; ++ ++ spinlock_t irq_lock; ++ ++ unsigned long cache_req_pck; ++ unsigned long cache_prate; ++ struct dispc_clock_info cache_cinfo; ++ ++ u32 irq_error_mask; ++ struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS]; ++ ++ spinlock_t error_lock; ++ u32 error_irqs; ++ struct work_struct error_work; ++ ++ u32 ctx[DISPC_SZ_REGS / sizeof(u32)]; ++} dispc; ++ ++static void omap_dispc_set_irqs(void); ++ ++static inline void dispc_write_reg(const struct dispc_reg idx, u32 val) ++{ ++ __raw_writel(val, dispc.base + idx.idx); ++} ++ ++static inline u32 dispc_read_reg(const struct dispc_reg idx) ++{ ++ return __raw_readl(dispc.base + idx.idx); ++} ++ ++#define SR(reg) \ ++ dispc.ctx[(DISPC_##reg).idx / sizeof(u32)] = dispc_read_reg(DISPC_##reg) ++#define RR(reg) \ ++ dispc_write_reg(DISPC_##reg, dispc.ctx[(DISPC_##reg).idx / sizeof(u32)]) ++ ++void dispc_save_context(void) ++{ ++ if (cpu_is_omap24xx()) ++ return; ++ ++ SR(SYSCONFIG); ++ SR(IRQENABLE); ++ SR(CONTROL); ++ SR(CONFIG); ++ SR(DEFAULT_COLOR0); ++ SR(DEFAULT_COLOR1); ++ SR(TRANS_COLOR0); ++ SR(TRANS_COLOR1); ++ SR(LINE_NUMBER); ++ SR(TIMING_H); ++ SR(TIMING_V); ++ SR(POL_FREQ); ++ SR(DIVISOR); ++ SR(GLOBAL_ALPHA); ++ SR(SIZE_DIG); ++ SR(SIZE_LCD); ++ ++ SR(GFX_BA0); ++ SR(GFX_BA1); ++ SR(GFX_POSITION); ++ SR(GFX_SIZE); ++ SR(GFX_ATTRIBUTES); ++ SR(GFX_FIFO_THRESHOLD); ++ SR(GFX_ROW_INC); ++ SR(GFX_PIXEL_INC); ++ SR(GFX_WINDOW_SKIP); ++ SR(GFX_TABLE_BA); ++ ++ SR(DATA_CYCLE1); ++ SR(DATA_CYCLE2); ++ SR(DATA_CYCLE3); ++ ++ SR(CPR_COEF_R); ++ SR(CPR_COEF_G); ++ SR(CPR_COEF_B); ++ ++ SR(GFX_PRELOAD); ++ ++ /* VID1 */ ++ SR(VID_BA0(0)); ++ SR(VID_BA1(0)); ++ SR(VID_POSITION(0)); ++ SR(VID_SIZE(0)); ++ SR(VID_ATTRIBUTES(0)); ++ SR(VID_FIFO_THRESHOLD(0)); ++ SR(VID_ROW_INC(0)); ++ SR(VID_PIXEL_INC(0)); ++ SR(VID_FIR(0)); ++ SR(VID_PICTURE_SIZE(0)); ++ SR(VID_ACCU0(0)); ++ SR(VID_ACCU1(0)); ++ ++ SR(VID_FIR_COEF_H(0, 0)); ++ SR(VID_FIR_COEF_H(0, 1)); ++ SR(VID_FIR_COEF_H(0, 2)); ++ SR(VID_FIR_COEF_H(0, 3)); ++ SR(VID_FIR_COEF_H(0, 4)); ++ SR(VID_FIR_COEF_H(0, 5)); ++ SR(VID_FIR_COEF_H(0, 6)); ++ SR(VID_FIR_COEF_H(0, 7)); ++ ++ SR(VID_FIR_COEF_HV(0, 0)); ++ SR(VID_FIR_COEF_HV(0, 1)); ++ SR(VID_FIR_COEF_HV(0, 2)); ++ SR(VID_FIR_COEF_HV(0, 3)); ++ SR(VID_FIR_COEF_HV(0, 4)); ++ SR(VID_FIR_COEF_HV(0, 5)); ++ SR(VID_FIR_COEF_HV(0, 6)); ++ SR(VID_FIR_COEF_HV(0, 7)); ++ ++ SR(VID_CONV_COEF(0, 0)); ++ SR(VID_CONV_COEF(0, 1)); ++ SR(VID_CONV_COEF(0, 2)); ++ SR(VID_CONV_COEF(0, 3)); ++ SR(VID_CONV_COEF(0, 4)); ++ ++ SR(VID_FIR_COEF_V(0, 0)); ++ SR(VID_FIR_COEF_V(0, 1)); ++ SR(VID_FIR_COEF_V(0, 2)); ++ SR(VID_FIR_COEF_V(0, 3)); ++ SR(VID_FIR_COEF_V(0, 4)); ++ SR(VID_FIR_COEF_V(0, 5)); ++ SR(VID_FIR_COEF_V(0, 6)); ++ SR(VID_FIR_COEF_V(0, 7)); ++ ++ SR(VID_PRELOAD(0)); ++ ++ /* VID2 */ ++ SR(VID_BA0(1)); ++ SR(VID_BA1(1)); ++ SR(VID_POSITION(1)); ++ SR(VID_SIZE(1)); ++ SR(VID_ATTRIBUTES(1)); ++ SR(VID_FIFO_THRESHOLD(1)); ++ SR(VID_ROW_INC(1)); ++ SR(VID_PIXEL_INC(1)); ++ SR(VID_FIR(1)); ++ SR(VID_PICTURE_SIZE(1)); ++ SR(VID_ACCU0(1)); ++ SR(VID_ACCU1(1)); ++ ++ SR(VID_FIR_COEF_H(1, 0)); ++ SR(VID_FIR_COEF_H(1, 1)); ++ SR(VID_FIR_COEF_H(1, 2)); ++ SR(VID_FIR_COEF_H(1, 3)); ++ SR(VID_FIR_COEF_H(1, 4)); ++ SR(VID_FIR_COEF_H(1, 5)); ++ SR(VID_FIR_COEF_H(1, 6)); ++ SR(VID_FIR_COEF_H(1, 7)); ++ ++ SR(VID_FIR_COEF_HV(1, 0)); ++ SR(VID_FIR_COEF_HV(1, 1)); ++ SR(VID_FIR_COEF_HV(1, 2)); ++ SR(VID_FIR_COEF_HV(1, 3)); ++ SR(VID_FIR_COEF_HV(1, 4)); ++ SR(VID_FIR_COEF_HV(1, 5)); ++ SR(VID_FIR_COEF_HV(1, 6)); ++ SR(VID_FIR_COEF_HV(1, 7)); ++ ++ SR(VID_CONV_COEF(1, 0)); ++ SR(VID_CONV_COEF(1, 1)); ++ SR(VID_CONV_COEF(1, 2)); ++ SR(VID_CONV_COEF(1, 3)); ++ SR(VID_CONV_COEF(1, 4)); ++ ++ SR(VID_FIR_COEF_V(1, 0)); ++ SR(VID_FIR_COEF_V(1, 1)); ++ SR(VID_FIR_COEF_V(1, 2)); ++ SR(VID_FIR_COEF_V(1, 3)); ++ SR(VID_FIR_COEF_V(1, 4)); ++ SR(VID_FIR_COEF_V(1, 5)); ++ SR(VID_FIR_COEF_V(1, 6)); ++ SR(VID_FIR_COEF_V(1, 7)); ++ ++ SR(VID_PRELOAD(1)); ++} ++ ++void dispc_restore_context(void) ++{ ++ RR(SYSCONFIG); ++ RR(IRQENABLE); ++ /*RR(CONTROL);*/ ++ RR(CONFIG); ++ RR(DEFAULT_COLOR0); ++ RR(DEFAULT_COLOR1); ++ RR(TRANS_COLOR0); ++ RR(TRANS_COLOR1); ++ RR(LINE_NUMBER); ++ RR(TIMING_H); ++ RR(TIMING_V); ++ RR(POL_FREQ); ++ RR(DIVISOR); ++ RR(GLOBAL_ALPHA); ++ RR(SIZE_DIG); ++ RR(SIZE_LCD); ++ ++ RR(GFX_BA0); ++ RR(GFX_BA1); ++ RR(GFX_POSITION); ++ RR(GFX_SIZE); ++ RR(GFX_ATTRIBUTES); ++ RR(GFX_FIFO_THRESHOLD); ++ RR(GFX_ROW_INC); ++ RR(GFX_PIXEL_INC); ++ RR(GFX_WINDOW_SKIP); ++ RR(GFX_TABLE_BA); ++ ++ RR(DATA_CYCLE1); ++ RR(DATA_CYCLE2); ++ RR(DATA_CYCLE3); ++ ++ RR(CPR_COEF_R); ++ RR(CPR_COEF_G); ++ RR(CPR_COEF_B); ++ ++ RR(GFX_PRELOAD); ++ ++ /* VID1 */ ++ RR(VID_BA0(0)); ++ RR(VID_BA1(0)); ++ RR(VID_POSITION(0)); ++ RR(VID_SIZE(0)); ++ RR(VID_ATTRIBUTES(0)); ++ RR(VID_FIFO_THRESHOLD(0)); ++ RR(VID_ROW_INC(0)); ++ RR(VID_PIXEL_INC(0)); ++ RR(VID_FIR(0)); ++ RR(VID_PICTURE_SIZE(0)); ++ RR(VID_ACCU0(0)); ++ RR(VID_ACCU1(0)); ++ ++ RR(VID_FIR_COEF_H(0, 0)); ++ RR(VID_FIR_COEF_H(0, 1)); ++ RR(VID_FIR_COEF_H(0, 2)); ++ RR(VID_FIR_COEF_H(0, 3)); ++ RR(VID_FIR_COEF_H(0, 4)); ++ RR(VID_FIR_COEF_H(0, 5)); ++ RR(VID_FIR_COEF_H(0, 6)); ++ RR(VID_FIR_COEF_H(0, 7)); ++ ++ RR(VID_FIR_COEF_HV(0, 0)); ++ RR(VID_FIR_COEF_HV(0, 1)); ++ RR(VID_FIR_COEF_HV(0, 2)); ++ RR(VID_FIR_COEF_HV(0, 3)); ++ RR(VID_FIR_COEF_HV(0, 4)); ++ RR(VID_FIR_COEF_HV(0, 5)); ++ RR(VID_FIR_COEF_HV(0, 6)); ++ RR(VID_FIR_COEF_HV(0, 7)); ++ ++ RR(VID_CONV_COEF(0, 0)); ++ RR(VID_CONV_COEF(0, 1)); ++ RR(VID_CONV_COEF(0, 2)); ++ RR(VID_CONV_COEF(0, 3)); ++ RR(VID_CONV_COEF(0, 4)); ++ ++ RR(VID_FIR_COEF_V(0, 0)); ++ RR(VID_FIR_COEF_V(0, 1)); ++ RR(VID_FIR_COEF_V(0, 2)); ++ RR(VID_FIR_COEF_V(0, 3)); ++ RR(VID_FIR_COEF_V(0, 4)); ++ RR(VID_FIR_COEF_V(0, 5)); ++ RR(VID_FIR_COEF_V(0, 6)); ++ RR(VID_FIR_COEF_V(0, 7)); ++ ++ RR(VID_PRELOAD(0)); ++ ++ /* VID2 */ ++ RR(VID_BA0(1)); ++ RR(VID_BA1(1)); ++ RR(VID_POSITION(1)); ++ RR(VID_SIZE(1)); ++ RR(VID_ATTRIBUTES(1)); ++ RR(VID_FIFO_THRESHOLD(1)); ++ RR(VID_ROW_INC(1)); ++ RR(VID_PIXEL_INC(1)); ++ RR(VID_FIR(1)); ++ RR(VID_PICTURE_SIZE(1)); ++ RR(VID_ACCU0(1)); ++ RR(VID_ACCU1(1)); ++ ++ RR(VID_FIR_COEF_H(1, 0)); ++ RR(VID_FIR_COEF_H(1, 1)); ++ RR(VID_FIR_COEF_H(1, 2)); ++ RR(VID_FIR_COEF_H(1, 3)); ++ RR(VID_FIR_COEF_H(1, 4)); ++ RR(VID_FIR_COEF_H(1, 5)); ++ RR(VID_FIR_COEF_H(1, 6)); ++ RR(VID_FIR_COEF_H(1, 7)); ++ ++ RR(VID_FIR_COEF_HV(1, 0)); ++ RR(VID_FIR_COEF_HV(1, 1)); ++ RR(VID_FIR_COEF_HV(1, 2)); ++ RR(VID_FIR_COEF_HV(1, 3)); ++ RR(VID_FIR_COEF_HV(1, 4)); ++ RR(VID_FIR_COEF_HV(1, 5)); ++ RR(VID_FIR_COEF_HV(1, 6)); ++ RR(VID_FIR_COEF_HV(1, 7)); ++ ++ RR(VID_CONV_COEF(1, 0)); ++ RR(VID_CONV_COEF(1, 1)); ++ RR(VID_CONV_COEF(1, 2)); ++ RR(VID_CONV_COEF(1, 3)); ++ RR(VID_CONV_COEF(1, 4)); ++ ++ RR(VID_FIR_COEF_V(1, 0)); ++ RR(VID_FIR_COEF_V(1, 1)); ++ RR(VID_FIR_COEF_V(1, 2)); ++ RR(VID_FIR_COEF_V(1, 3)); ++ RR(VID_FIR_COEF_V(1, 4)); ++ RR(VID_FIR_COEF_V(1, 5)); ++ RR(VID_FIR_COEF_V(1, 6)); ++ RR(VID_FIR_COEF_V(1, 7)); ++ ++ RR(VID_PRELOAD(1)); ++ ++ /* enable last, because LCD & DIGIT enable are here */ ++ RR(CONTROL); ++} ++ ++#undef SR ++#undef RR ++ ++static inline void enable_clocks(bool enable) ++{ ++ if (enable) ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ else ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++} ++ ++void dispc_go(enum omap_channel channel) ++{ ++ int bit; ++ unsigned long tmo; ++ ++ enable_clocks(1); ++ ++ if (channel == OMAP_DSS_CHANNEL_LCD) ++ bit = 0; /* LCDENABLE */ ++ else ++ bit = 1; /* DIGITALENABLE */ ++ ++ /* if the channel is not enabled, we don't need GO */ ++ if (REG_GET(DISPC_CONTROL, bit, bit) == 0) ++ goto end; ++ ++ if (channel == OMAP_DSS_CHANNEL_LCD) ++ bit = 5; /* GOLCD */ ++ else ++ bit = 6; /* GODIGIT */ ++ ++ tmo = jiffies + msecs_to_jiffies(200); ++ while (REG_GET(DISPC_CONTROL, bit, bit) == 1) { ++ if (time_after(jiffies, tmo)) { ++ DSSERR("timeout waiting GO flag\n"); ++ goto end; ++ } ++ cpu_relax(); ++ } ++ ++ DSSDBG("GO %s\n", channel == OMAP_DSS_CHANNEL_LCD ? "LCD" : "DIGIT"); ++ ++ REG_FLD_MOD(DISPC_CONTROL, 1, bit, bit); ++end: ++ enable_clocks(0); ++} ++ ++static void _dispc_write_firh_reg(enum omap_plane plane, int reg, u32 value) ++{ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ dispc_write_reg(DISPC_VID_FIR_COEF_H(plane-1, reg), value); ++} ++ ++static void _dispc_write_firhv_reg(enum omap_plane plane, int reg, u32 value) ++{ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ dispc_write_reg(DISPC_VID_FIR_COEF_HV(plane-1, reg), value); ++} ++ ++static void _dispc_write_firv_reg(enum omap_plane plane, int reg, u32 value) ++{ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ dispc_write_reg(DISPC_VID_FIR_COEF_V(plane-1, reg), value); ++} ++ ++static void _dispc_set_scale_coef(enum omap_plane plane, int hscaleup, ++ int vscaleup, int five_taps) ++{ ++ /* Coefficients for horizontal up-sampling */ ++ static const u32 coef_hup[8] = { ++ 0x00800000, ++ 0x0D7CF800, ++ 0x1E70F5FF, ++ 0x335FF5FE, ++ 0xF74949F7, ++ 0xF55F33FB, ++ 0xF5701EFE, ++ 0xF87C0DFF, ++ }; ++ ++ /* Coefficients for horizontal down-sampling */ ++ static const u32 coef_hdown[8] = { ++ 0x24382400, ++ 0x28371FFE, ++ 0x2C361BFB, ++ 0x303516F9, ++ 0x11343311, ++ 0x1635300C, ++ 0x1B362C08, ++ 0x1F372804, ++ }; ++ ++ /* Coefficients for horizontal and vertical up-sampling */ ++ static const u32 coef_hvup[2][8] = { ++ { ++ 0x00800000, ++ 0x037B02FF, ++ 0x0C6F05FE, ++ 0x205907FB, ++ 0x00404000, ++ 0x075920FE, ++ 0x056F0CFF, ++ 0x027B0300, ++ }, ++ { ++ 0x00800000, ++ 0x0D7CF8FF, ++ 0x1E70F5FE, ++ 0x335FF5FB, ++ 0xF7404000, ++ 0xF55F33FE, ++ 0xF5701EFF, ++ 0xF87C0D00, ++ }, ++ }; ++ ++ /* Coefficients for horizontal and vertical down-sampling */ ++ static const u32 coef_hvdown[2][8] = { ++ { ++ 0x24382400, ++ 0x28391F04, ++ 0x2D381B08, ++ 0x3237170C, ++ 0x123737F7, ++ 0x173732F9, ++ 0x1B382DFB, ++ 0x1F3928FE, ++ }, ++ { ++ 0x24382400, ++ 0x28371F04, ++ 0x2C361B08, ++ 0x3035160C, ++ 0x113433F7, ++ 0x163530F9, ++ 0x1B362CFB, ++ 0x1F3728FE, ++ }, ++ }; ++ ++ /* Coefficients for vertical up-sampling */ ++ static const u32 coef_vup[8] = { ++ 0x00000000, ++ 0x0000FF00, ++ 0x0000FEFF, ++ 0x0000FBFE, ++ 0x000000F7, ++ 0x0000FEFB, ++ 0x0000FFFE, ++ 0x000000FF, ++ }; ++ ++ ++ /* Coefficients for vertical down-sampling */ ++ static const u32 coef_vdown[8] = { ++ 0x00000000, ++ 0x000004FE, ++ 0x000008FB, ++ 0x00000CF9, ++ 0x0000F711, ++ 0x0000F90C, ++ 0x0000FB08, ++ 0x0000FE04, ++ }; ++ ++ const u32 *h_coef; ++ const u32 *hv_coef; ++ const u32 *hv_coef_mod; ++ const u32 *v_coef; ++ int i; ++ ++ if (hscaleup) ++ h_coef = coef_hup; ++ else ++ h_coef = coef_hdown; ++ ++ if (vscaleup) { ++ hv_coef = coef_hvup[five_taps]; ++ v_coef = coef_vup; ++ ++ if (hscaleup) ++ hv_coef_mod = NULL; ++ else ++ hv_coef_mod = coef_hvdown[five_taps]; ++ } else { ++ hv_coef = coef_hvdown[five_taps]; ++ v_coef = coef_vdown; ++ ++ if (hscaleup) ++ hv_coef_mod = coef_hvup[five_taps]; ++ else ++ hv_coef_mod = NULL; ++ } ++ ++ for (i = 0; i < 8; i++) { ++ u32 h, hv; ++ ++ h = h_coef[i]; ++ ++ hv = hv_coef[i]; ++ ++ if (hv_coef_mod) { ++ hv &= 0xffffff00; ++ hv |= (hv_coef_mod[i] & 0xff); ++ } ++ ++ _dispc_write_firh_reg(plane, i, h); ++ _dispc_write_firhv_reg(plane, i, hv); ++ } ++ ++ if (!five_taps) ++ return; ++ ++ for (i = 0; i < 8; i++) { ++ u32 v; ++ v = v_coef[i]; ++ _dispc_write_firv_reg(plane, i, v); ++ } ++} ++ ++static void _dispc_setup_color_conv_coef(void) ++{ ++ const struct color_conv_coef { ++ int ry, rcr, rcb, gy, gcr, gcb, by, bcr, bcb; ++ int full_range; ++ } ctbl_bt601_5 = { ++ 298, 409, 0, 298, -208, -100, 298, 0, 517, 0, ++ }; ++ ++ const struct color_conv_coef *ct; ++ ++#define CVAL(x, y) (FLD_VAL(x, 26, 16) | FLD_VAL(y, 10, 0)) ++ ++ ct = &ctbl_bt601_5; ++ ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 0), CVAL(ct->rcr, ct->ry)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 1), CVAL(ct->gy, ct->rcb)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 2), CVAL(ct->gcb, ct->gcr)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 3), CVAL(ct->bcr, ct->by)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(0, 4), CVAL(0, ct->bcb)); ++ ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 0), CVAL(ct->rcr, ct->ry)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 1), CVAL(ct->gy, ct->rcb)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 2), CVAL(ct->gcb, ct->gcr)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 3), CVAL(ct->bcr, ct->by)); ++ dispc_write_reg(DISPC_VID_CONV_COEF(1, 4), CVAL(0, ct->bcb)); ++ ++#undef CVAL ++ ++ REG_FLD_MOD(DISPC_VID_ATTRIBUTES(0), ct->full_range, 11, 11); ++ REG_FLD_MOD(DISPC_VID_ATTRIBUTES(1), ct->full_range, 11, 11); ++} ++ ++ ++static void _dispc_set_plane_ba0(enum omap_plane plane, u32 paddr) ++{ ++ const struct dispc_reg ba0_reg[] = { DISPC_GFX_BA0, ++ DISPC_VID_BA0(0), ++ DISPC_VID_BA0(1) }; ++ ++ dispc_write_reg(ba0_reg[plane], paddr); ++} ++ ++static void _dispc_set_plane_ba1(enum omap_plane plane, u32 paddr) ++{ ++ const struct dispc_reg ba1_reg[] = { DISPC_GFX_BA1, ++ DISPC_VID_BA1(0), ++ DISPC_VID_BA1(1) }; ++ ++ dispc_write_reg(ba1_reg[plane], paddr); ++} ++ ++static void _dispc_set_plane_pos(enum omap_plane plane, int x, int y) ++{ ++ const struct dispc_reg pos_reg[] = { DISPC_GFX_POSITION, ++ DISPC_VID_POSITION(0), ++ DISPC_VID_POSITION(1) }; ++ ++ u32 val = FLD_VAL(y, 26, 16) | FLD_VAL(x, 10, 0); ++ dispc_write_reg(pos_reg[plane], val); ++} ++ ++static void _dispc_set_pic_size(enum omap_plane plane, int width, int height) ++{ ++ const struct dispc_reg siz_reg[] = { DISPC_GFX_SIZE, ++ DISPC_VID_PICTURE_SIZE(0), ++ DISPC_VID_PICTURE_SIZE(1) }; ++ u32 val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); ++ dispc_write_reg(siz_reg[plane], val); ++} ++ ++static void _dispc_set_vid_size(enum omap_plane plane, int width, int height) ++{ ++ u32 val; ++ const struct dispc_reg vsi_reg[] = { DISPC_VID_SIZE(0), ++ DISPC_VID_SIZE(1) }; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); ++ dispc_write_reg(vsi_reg[plane-1], val); ++} ++ ++static void _dispc_set_pix_inc(enum omap_plane plane, u16 inc) ++{ ++ const struct dispc_reg ri_reg[] = { DISPC_GFX_PIXEL_INC, ++ DISPC_VID_PIXEL_INC(0), ++ DISPC_VID_PIXEL_INC(1) }; ++ ++ dispc_write_reg(ri_reg[plane], inc); ++} ++ ++static void _dispc_set_row_inc(enum omap_plane plane, u16 inc) ++{ ++ const struct dispc_reg ri_reg[] = { DISPC_GFX_ROW_INC, ++ DISPC_VID_ROW_INC(0), ++ DISPC_VID_ROW_INC(1) }; ++ ++ dispc_write_reg(ri_reg[plane], inc); ++} ++ ++static void _dispc_set_color_mode(enum omap_plane plane, ++ enum omap_color_mode color_mode) ++{ ++ u32 m = 0; ++ ++ switch (color_mode) { ++ case OMAP_DSS_COLOR_CLUT1: ++ m = 0x0; break; ++ case OMAP_DSS_COLOR_CLUT2: ++ m = 0x1; break; ++ case OMAP_DSS_COLOR_CLUT4: ++ m = 0x2; break; ++ case OMAP_DSS_COLOR_CLUT8: ++ m = 0x3; break; ++ case OMAP_DSS_COLOR_RGB12U: ++ m = 0x4; break; ++ case OMAP_DSS_COLOR_ARGB16: ++ m = 0x5; break; ++ case OMAP_DSS_COLOR_RGB16: ++ m = 0x6; break; ++ case OMAP_DSS_COLOR_RGB24U: ++ m = 0x8; break; ++ case OMAP_DSS_COLOR_RGB24P: ++ m = 0x9; break; ++ case OMAP_DSS_COLOR_YUV2: ++ m = 0xa; break; ++ case OMAP_DSS_COLOR_UYVY: ++ m = 0xb; break; ++ case OMAP_DSS_COLOR_ARGB32: ++ m = 0xc; break; ++ case OMAP_DSS_COLOR_RGBA32: ++ m = 0xd; break; ++ case OMAP_DSS_COLOR_RGBX32: ++ m = 0xe; break; ++ default: ++ BUG(); break; ++ } ++ ++ REG_FLD_MOD(dispc_reg_att[plane], m, 4, 1); ++} ++ ++static void _dispc_set_channel_out(enum omap_plane plane, ++ enum omap_channel channel) ++{ ++ int shift; ++ u32 val; ++ ++ switch (plane) { ++ case OMAP_DSS_GFX: ++ shift = 8; ++ break; ++ case OMAP_DSS_VIDEO1: ++ case OMAP_DSS_VIDEO2: ++ shift = 16; ++ break; ++ default: ++ BUG(); ++ return; ++ } ++ ++ val = dispc_read_reg(dispc_reg_att[plane]); ++ val = FLD_MOD(val, channel, shift, shift); ++ dispc_write_reg(dispc_reg_att[plane], val); ++} ++ ++void dispc_set_burst_size(enum omap_plane plane, ++ enum omap_burst_size burst_size) ++{ ++ int shift; ++ u32 val; ++ ++ enable_clocks(1); ++ ++ switch (plane) { ++ case OMAP_DSS_GFX: ++ shift = 6; ++ break; ++ case OMAP_DSS_VIDEO1: ++ case OMAP_DSS_VIDEO2: ++ shift = 14; ++ break; ++ default: ++ BUG(); ++ return; ++ } ++ ++ val = dispc_read_reg(dispc_reg_att[plane]); ++ val = FLD_MOD(val, burst_size, shift+1, shift); ++ dispc_write_reg(dispc_reg_att[plane], val); ++ ++ enable_clocks(0); ++} ++ ++static void _dispc_set_vid_color_conv(enum omap_plane plane, bool enable) ++{ ++ u32 val; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = dispc_read_reg(dispc_reg_att[plane]); ++ val = FLD_MOD(val, enable, 9, 9); ++ dispc_write_reg(dispc_reg_att[plane], val); ++} ++ ++void dispc_set_lcd_size(u16 width, u16 height) ++{ ++ u32 val; ++ BUG_ON((width > (1 << 11)) || (height > (1 << 11))); ++ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); ++ enable_clocks(1); ++ dispc_write_reg(DISPC_SIZE_LCD, val); ++ enable_clocks(0); ++} ++ ++void dispc_set_digit_size(u16 width, u16 height) ++{ ++ u32 val; ++ BUG_ON((width > (1 << 11)) || (height > (1 << 11))); ++ val = FLD_VAL(height - 1, 26, 16) | FLD_VAL(width - 1, 10, 0); ++ enable_clocks(1); ++ dispc_write_reg(DISPC_SIZE_DIG, val); ++ enable_clocks(0); ++} ++ ++u32 dispc_get_plane_fifo_size(enum omap_plane plane) ++{ ++ const struct dispc_reg fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS, ++ DISPC_VID_FIFO_SIZE_STATUS(0), ++ DISPC_VID_FIFO_SIZE_STATUS(1) }; ++ u32 size; ++ ++ enable_clocks(1); ++ ++ if (cpu_is_omap24xx()) ++ size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 8, 0); ++ else if (cpu_is_omap34xx()) ++ size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 10, 0); ++ else ++ BUG(); ++ ++ if (cpu_is_omap34xx()) { ++ /* FIFOMERGE */ ++ if (REG_GET(DISPC_CONFIG, 14, 14)) ++ size *= 3; ++ } ++ ++ enable_clocks(0); ++ ++ return size; ++} ++ ++void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high) ++{ ++ const struct dispc_reg ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD, ++ DISPC_VID_FIFO_THRESHOLD(0), ++ DISPC_VID_FIFO_THRESHOLD(1) }; ++ u32 size; ++ ++ enable_clocks(1); ++ ++ size = dispc_get_plane_fifo_size(plane); ++ ++ BUG_ON(low > size || high > size); ++ ++ DSSDBG("fifo(%d) size %d, low/high old %u/%u, new %u/%u\n", ++ plane, size, ++ REG_GET(ftrs_reg[plane], 11, 0), ++ REG_GET(ftrs_reg[plane], 27, 16), ++ low, high); ++ ++ if (cpu_is_omap24xx()) ++ dispc_write_reg(ftrs_reg[plane], ++ FLD_VAL(high, 24, 16) | FLD_VAL(low, 8, 0)); ++ else ++ dispc_write_reg(ftrs_reg[plane], ++ FLD_VAL(high, 27, 16) | FLD_VAL(low, 11, 0)); ++ ++ enable_clocks(0); ++} ++ ++void dispc_enable_fifomerge(bool enable) ++{ ++ enable_clocks(1); ++ ++ DSSDBG("FIFO merge %s\n", enable ? "enabled" : "disabled"); ++ REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 14, 14); ++ ++ enable_clocks(0); ++} ++ ++static void _dispc_set_fir(enum omap_plane plane, int hinc, int vinc) ++{ ++ u32 val; ++ const struct dispc_reg fir_reg[] = { DISPC_VID_FIR(0), ++ DISPC_VID_FIR(1) }; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = FLD_VAL(vinc, 27, 16) | FLD_VAL(hinc, 11, 0); ++ dispc_write_reg(fir_reg[plane-1], val); ++} ++ ++static void _dispc_set_vid_accu0(enum omap_plane plane, int haccu, int vaccu) ++{ ++ u32 val; ++ const struct dispc_reg ac0_reg[] = { DISPC_VID_ACCU0(0), ++ DISPC_VID_ACCU0(1) }; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0); ++ dispc_write_reg(ac0_reg[plane-1], val); ++} ++ ++static void _dispc_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu) ++{ ++ u32 val; ++ const struct dispc_reg ac1_reg[] = { DISPC_VID_ACCU1(0), ++ DISPC_VID_ACCU1(1) }; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ val = FLD_VAL(vaccu, 25, 16) | FLD_VAL(haccu, 9, 0); ++ dispc_write_reg(ac1_reg[plane-1], val); ++} ++ ++ ++static void _dispc_set_scaling(enum omap_plane plane, ++ u16 orig_width, u16 orig_height, ++ u16 out_width, u16 out_height, ++ bool ilace) ++{ ++ int fir_hinc; ++ int fir_vinc; ++ int hscaleup, vscaleup, five_taps; ++ int fieldmode = 0; ++ int accu0 = 0; ++ int accu1 = 0; ++ u32 l; ++ ++ BUG_ON(plane == OMAP_DSS_GFX); ++ ++ hscaleup = orig_width <= out_width; ++ vscaleup = orig_height <= out_height; ++ five_taps = orig_height > out_height * 2; ++ ++ _dispc_set_scale_coef(plane, hscaleup, vscaleup, five_taps); ++ ++ if (!orig_width || orig_width == out_width) ++ fir_hinc = 0; ++ else ++ fir_hinc = 1024 * orig_width / out_width; ++ ++ if (!orig_height || orig_height == out_height) ++ fir_vinc = 0; ++ else ++ fir_vinc = 1024 * orig_height / out_height; ++ ++ _dispc_set_fir(plane, fir_hinc, fir_vinc); ++ ++ l = dispc_read_reg(dispc_reg_att[plane]); ++ l &= ~((0x0f << 5) | (0x3 << 21)); ++ ++ l |= fir_hinc ? (1 << 5) : 0; ++ l |= fir_vinc ? (1 << 6) : 0; ++ ++ l |= hscaleup ? 0 : (1 << 7); ++ l |= vscaleup ? 0 : (1 << 8); ++ ++ l |= five_taps ? (1 << 21) : 0; ++ l |= five_taps ? (1 << 22) : 0; ++ ++ dispc_write_reg(dispc_reg_att[plane], l); ++ ++ if (ilace) { ++ if (fieldmode) { ++ accu0 = fir_vinc / 2; ++ accu1 = 0; ++ } else { ++ accu0 = 0; ++ accu1 = fir_vinc / 2; ++ if (accu1 >= 1024/2) { ++ accu0 = 1024/2; ++ accu1 -= accu0; ++ } ++ } ++ } ++ ++ _dispc_set_vid_accu0(plane, 0, accu0); ++ _dispc_set_vid_accu1(plane, 0, accu1); ++} ++ ++static void _dispc_set_rotation_attrs(enum omap_plane plane, u8 rotation, ++ bool mirroring, enum omap_color_mode color_mode) ++{ ++ if (color_mode == OMAP_DSS_COLOR_YUV2 || ++ color_mode == OMAP_DSS_COLOR_UYVY) { ++ int vidrot = 0; ++ ++ if (mirroring) { ++ switch (rotation) { ++ case 0: vidrot = 2; break; ++ case 1: vidrot = 3; break; ++ case 2: vidrot = 0; break; ++ case 3: vidrot = 1; break; ++ } ++ } else { ++ switch (rotation) { ++ case 0: vidrot = 0; break; ++ case 1: vidrot = 1; break; ++ case 2: vidrot = 2; break; ++ case 3: vidrot = 1; break; ++ } ++ } ++ ++ REG_FLD_MOD(dispc_reg_att[plane], vidrot, 13, 12); ++ ++ if (rotation == 1 || rotation == 3) ++ REG_FLD_MOD(dispc_reg_att[plane], 0x1, 18, 18); ++ else ++ REG_FLD_MOD(dispc_reg_att[plane], 0x0, 18, 18); ++ } else { ++ REG_FLD_MOD(dispc_reg_att[plane], 0, 13, 12); ++ REG_FLD_MOD(dispc_reg_att[plane], 0, 18, 18); ++ } ++} ++ ++static int pixinc(int pixels, u8 ps) ++{ ++ if (pixels == 1) ++ return 1; ++ else if (pixels > 1) ++ return 1 + (pixels - 1) * ps; ++ else if (pixels < 0) ++ return 1 - (-pixels + 1) * ps; ++ else ++ BUG(); ++} ++ ++static void calc_rotation_offset(u8 rotation, bool mirror, ++ u16 screen_width, ++ u16 width, u16 height, ++ enum omap_color_mode color_mode, bool fieldmode, ++ unsigned *offset0, unsigned *offset1, ++ u16 *row_inc, u16 *pix_inc) ++{ ++ u8 ps; ++ u16 fbw, fbh; ++ ++ switch (color_mode) { ++ case OMAP_DSS_COLOR_RGB16: ++ case OMAP_DSS_COLOR_ARGB16: ++ ps = 2; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24P: ++ ps = 3; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24U: ++ case OMAP_DSS_COLOR_ARGB32: ++ case OMAP_DSS_COLOR_RGBA32: ++ case OMAP_DSS_COLOR_RGBX32: ++ ps = 4; ++ break; ++ ++ case OMAP_DSS_COLOR_YUV2: ++ case OMAP_DSS_COLOR_UYVY: ++ ps = 2; ++ break; ++ default: ++ BUG(); ++ return; ++ } ++ ++ DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width, ++ width, height); ++ ++ /* width & height are overlay sizes, convert to fb sizes */ ++ ++ if (rotation == 0 || rotation == 2) { ++ fbw = width; ++ fbh = height; ++ } else { ++ fbw = height; ++ fbh = width; ++ } ++ ++ switch (rotation + mirror * 4) { ++ case 0: ++ *offset0 = 0; ++ if (fieldmode) ++ *offset1 = screen_width * ps; ++ else ++ *offset1 = 0; ++ *row_inc = pixinc(1 + (screen_width - fbw) + ++ (fieldmode ? screen_width : 0), ++ ps); ++ *pix_inc = pixinc(1, ps); ++ break; ++ case 1: ++ *offset0 = screen_width * (fbh - 1) * ps; ++ if (fieldmode) ++ *offset1 = *offset0 + ps; ++ else ++ *offset1 = *offset0; ++ *row_inc = pixinc(screen_width * (fbh - 1) + 1 + ++ (fieldmode ? 1 : 0), ps); ++ *pix_inc = pixinc(-screen_width, ps); ++ break; ++ case 2: ++ *offset0 = (screen_width * (fbh - 1) + fbw - 1) * ps; ++ if (fieldmode) ++ *offset1 = *offset0 - screen_width * ps; ++ else ++ *offset1 = *offset0; ++ *row_inc = pixinc(-1 - ++ (screen_width - fbw) - ++ (fieldmode ? screen_width : 0), ++ ps); ++ *pix_inc = pixinc(-1, ps); ++ break; ++ case 3: ++ *offset0 = (fbw - 1) * ps; ++ if (fieldmode) ++ *offset1 = *offset0 - ps; ++ else ++ *offset1 = *offset0; ++ *row_inc = pixinc(-screen_width * (fbh - 1) - 1 - ++ (fieldmode ? 1 : 0), ps); ++ *pix_inc = pixinc(screen_width, ps); ++ break; ++ ++ /* mirroring */ ++ case 0 + 4: ++ *offset0 = (fbw - 1) * ps; ++ if (fieldmode) ++ *offset1 = *offset0 + screen_width * ps; ++ else ++ *offset1 = *offset0; ++ *row_inc = pixinc(screen_width * 2 - 1 + ++ (fieldmode ? screen_width : 0), ++ ps); ++ *pix_inc = pixinc(-1, ps); ++ break; ++ ++ case 1 + 4: ++ *offset0 = 0; ++ if (fieldmode) ++ *offset1 = *offset0 + screen_width * ps; ++ else ++ *offset1 = *offset0; ++ *row_inc = pixinc(-screen_width * (fbh - 1) + 1 + ++ (fieldmode ? 1 : 0), ++ ps); ++ *pix_inc = pixinc(screen_width, ps); ++ break; ++ ++ case 2 + 4: ++ *offset0 = screen_width * (fbh - 1) * ps; ++ if (fieldmode) ++ *offset1 = *offset0 + screen_width * ps; ++ else ++ *offset1 = *offset0; ++ *row_inc = pixinc(1 - screen_width * 2 - ++ (fieldmode ? screen_width : 0), ++ ps); ++ *pix_inc = pixinc(1, ps); ++ break; ++ ++ case 3 + 4: ++ *offset0 = (screen_width * (fbh - 1) + fbw - 1) * ps; ++ if (fieldmode) ++ *offset1 = *offset0 + screen_width * ps; ++ else ++ *offset1 = *offset0; ++ *row_inc = pixinc(screen_width * (fbh - 1) - 1 - ++ (fieldmode ? 1 : 0), ++ ps); ++ *pix_inc = pixinc(-screen_width, ps); ++ break; ++ ++ default: ++ BUG(); ++ } ++} ++ ++static int _dispc_setup_plane(enum omap_plane plane, ++ enum omap_channel channel_out, ++ u32 paddr, u16 screen_width, ++ u16 pos_x, u16 pos_y, ++ u16 width, u16 height, ++ u16 out_width, u16 out_height, ++ enum omap_color_mode color_mode, ++ bool ilace, ++ u8 rotation, int mirror) ++{ ++ const int maxdownscale = cpu_is_omap34xx() ? 4 : 2; ++ bool five_taps = height > out_height * 2; ++ bool fieldmode = 0; ++ int cconv = 0; ++ unsigned offset0, offset1; ++ u16 row_inc; ++ u16 pix_inc; ++ ++ if (plane == OMAP_DSS_GFX) { ++ if (width != out_width || height != out_height) ++ return -EINVAL; ++ ++ switch (color_mode) { ++ case OMAP_DSS_COLOR_ARGB16: ++ case OMAP_DSS_COLOR_RGB16: ++ case OMAP_DSS_COLOR_RGB24P: ++ case OMAP_DSS_COLOR_RGB24U: ++ case OMAP_DSS_COLOR_ARGB32: ++ case OMAP_DSS_COLOR_RGBA32: ++ case OMAP_DSS_COLOR_RGBX32: ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ } else { ++ /* video plane */ ++ if (width > (2048 >> five_taps)) ++ return -EINVAL; ++ ++ if (out_width < width / maxdownscale || ++ out_width > width * 8) ++ return -EINVAL; ++ ++ if (out_height < height / maxdownscale || ++ out_height > height * 8) ++ return -EINVAL; ++ ++ switch (color_mode) { ++ case OMAP_DSS_COLOR_RGB16: ++ case OMAP_DSS_COLOR_RGB24P: ++ case OMAP_DSS_COLOR_RGB24U: ++ case OMAP_DSS_COLOR_RGBX32: ++ break; ++ ++ case OMAP_DSS_COLOR_ARGB16: ++ case OMAP_DSS_COLOR_ARGB32: ++ case OMAP_DSS_COLOR_RGBA32: ++ if (plane == OMAP_DSS_VIDEO1) ++ return -EINVAL; ++ break; ++ ++ case OMAP_DSS_COLOR_YUV2: ++ case OMAP_DSS_COLOR_UYVY: ++ cconv = 1; ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ } ++ ++ if (ilace && height >= out_height) ++ fieldmode = 1; ++ ++ calc_rotation_offset(rotation, mirror, ++ screen_width, width, height, color_mode, ++ fieldmode, ++ &offset0, &offset1, &row_inc, &pix_inc); ++ ++ DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n", ++ offset0, offset1, row_inc, pix_inc); ++ ++ if (ilace) { ++ if (fieldmode) ++ height /= 2; ++ pos_y /= 2; ++ out_height /= 2; ++ ++ DSSDBG("adjusting for ilace: height %d, pos_y %d, " ++ "out_height %d\n", ++ height, pos_y, out_height); ++ } ++ ++ _dispc_set_channel_out(plane, channel_out); ++ _dispc_set_color_mode(plane, color_mode); ++ ++ _dispc_set_plane_ba0(plane, paddr + offset0); ++ _dispc_set_plane_ba1(plane, paddr + offset1); ++ ++ _dispc_set_row_inc(plane, row_inc); ++ _dispc_set_pix_inc(plane, pix_inc); ++ ++ DSSDBG("%d,%d %dx%d -> %dx%d\n", pos_x, pos_y, width, height, ++ out_width, out_height); ++ ++ _dispc_set_plane_pos(plane, pos_x, pos_y); ++ ++ _dispc_set_pic_size(plane, width, height); ++ ++ if (plane != OMAP_DSS_GFX) { ++ _dispc_set_scaling(plane, width, height, ++ out_width, out_height, ++ ilace); ++ _dispc_set_vid_size(plane, out_width, out_height); ++ _dispc_set_vid_color_conv(plane, cconv); ++ } ++ ++ _dispc_set_rotation_attrs(plane, rotation, mirror, color_mode); ++ ++ return 0; ++} ++ ++static void _dispc_enable_plane(enum omap_plane plane, bool enable) ++{ ++ REG_FLD_MOD(dispc_reg_att[plane], enable ? 1 : 0, 0, 0); ++} ++ ++static void dispc_disable_isr(void *data, u32 mask) ++{ ++ struct completion *compl = data; ++ complete(compl); ++} ++ ++static void _enable_lcd_out(bool enable) ++{ ++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 0, 0); ++} ++ ++void dispc_enable_lcd_out(bool enable) ++{ ++ struct completion frame_done_completion; ++ bool is_on; ++ int r; ++ ++ enable_clocks(1); ++ ++ /* When we disable LCD output, we need to wait until frame is done. ++ * Otherwise the DSS is still working, and turning off the clocks ++ * prevents DSS from going to OFF mode */ ++ is_on = REG_GET(DISPC_CONTROL, 0, 0); ++ ++ if (!enable && is_on) { ++ init_completion(&frame_done_completion); ++ ++ r = omap_dispc_register_isr(dispc_disable_isr, ++ &frame_done_completion, ++ DISPC_IRQ_FRAMEDONE); ++ ++ if (r) ++ DSSERR("failed to register FRAMEDONE isr\n"); ++ } ++ ++ _enable_lcd_out(enable); ++ ++ if (!enable && is_on) { ++ if (!wait_for_completion_timeout(&frame_done_completion, ++ msecs_to_jiffies(100))) ++ DSSERR("timeout waiting for FRAME DONE\n"); ++ ++ r = omap_dispc_unregister_isr(dispc_disable_isr, ++ &frame_done_completion, ++ DISPC_IRQ_FRAMEDONE); ++ ++ if (r) ++ DSSERR("failed to unregister FRAMEDONE isr\n"); ++ } ++ ++ enable_clocks(0); ++} ++ ++static void _enable_digit_out(bool enable) ++{ ++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 1, 1); ++} ++ ++void dispc_enable_digit_out(bool enable) ++{ ++ struct completion frame_done_completion; ++ int r; ++ ++ enable_clocks(1); ++ ++ if (REG_GET(DISPC_CONTROL, 1, 1) == enable) { ++ enable_clocks(0); ++ return; ++ } ++ ++ if (enable) { ++ /* When we enable digit output, we'll get an extra digit ++ * sync lost interrupt, that we need to ignore */ ++ dispc.irq_error_mask &= ~DISPC_IRQ_SYNC_LOST_DIGIT; ++ omap_dispc_set_irqs(); ++ } ++ ++ /* When we disable digit output, we need to wait until fields are done. ++ * Otherwise the DSS is still working, and turning off the clocks ++ * prevents DSS from going to OFF mode. And when enabling, we need to ++ * wait for the extra sync losts */ ++ init_completion(&frame_done_completion); ++ ++ r = omap_dispc_register_isr(dispc_disable_isr, &frame_done_completion, ++ DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD); ++ if (r) ++ DSSERR("failed to register EVSYNC isr\n"); ++ ++ _enable_digit_out(enable); ++ ++ /* XXX I understand from TRM that we should only wait for the ++ * current field to complete. But it seems we have to wait ++ * for both fields */ ++ if (!wait_for_completion_timeout(&frame_done_completion, ++ msecs_to_jiffies(100))) ++ DSSERR("timeout waiting for EVSYNC\n"); ++ ++ if (!wait_for_completion_timeout(&frame_done_completion, ++ msecs_to_jiffies(100))) ++ DSSERR("timeout waiting for EVSYNC\n"); ++ ++ r = omap_dispc_unregister_isr(dispc_disable_isr, ++ &frame_done_completion, ++ DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD); ++ if (r) ++ DSSERR("failed to unregister EVSYNC isr\n"); ++ ++ if (enable) { ++ dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR; ++ dispc_write_reg(DISPC_IRQSTATUS, DISPC_IRQ_SYNC_LOST_DIGIT); ++ omap_dispc_set_irqs(); ++ } ++ ++ enable_clocks(0); ++} ++ ++void dispc_lcd_enable_signal_polarity(bool act_high) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, act_high ? 1 : 0, 29, 29); ++ enable_clocks(0); ++} ++ ++void dispc_lcd_enable_signal(bool enable) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 28, 28); ++ enable_clocks(0); ++} ++ ++void dispc_pck_free_enable(bool enable) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 27, 27); ++ enable_clocks(0); ++} ++ ++void dispc_enable_fifohandcheck(bool enable) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 16, 16); ++ enable_clocks(0); ++} ++ ++ ++void dispc_set_lcd_display_type(enum omap_lcd_display_type type) ++{ ++ int mode; ++ ++ switch (type) { ++ case OMAP_DSS_LCD_DISPLAY_STN: ++ mode = 0; ++ break; ++ ++ case OMAP_DSS_LCD_DISPLAY_TFT: ++ mode = 1; ++ break; ++ ++ default: ++ BUG(); ++ return; ++ } ++ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, mode, 3, 3); ++ enable_clocks(0); ++} ++ ++void dispc_set_loadmode(enum omap_dss_load_mode mode) ++{ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONFIG, mode, 2, 1); ++ enable_clocks(0); ++} ++ ++ ++void dispc_set_default_color(enum omap_channel channel, u32 color) ++{ ++ const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0, ++ DISPC_DEFAULT_COLOR1 }; ++ ++ enable_clocks(1); ++ dispc_write_reg(def_reg[channel], color); ++ enable_clocks(0); ++} ++ ++u32 dispc_get_default_color(enum omap_channel channel) ++{ ++ const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0, ++ DISPC_DEFAULT_COLOR1 }; ++ u32 l; ++ ++ BUG_ON(channel != OMAP_DSS_CHANNEL_DIGIT && ++ channel != OMAP_DSS_CHANNEL_LCD); ++ ++ enable_clocks(1); ++ l = dispc_read_reg(def_reg[channel]); ++ enable_clocks(0); ++ ++ return l; ++} ++ ++void dispc_set_trans_key(enum omap_channel ch, ++ enum omap_dss_color_key_type type, ++ u32 trans_key) ++{ ++ const struct dispc_reg tr_reg[] = { ++ DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 }; ++ ++ enable_clocks(1); ++ if (ch == OMAP_DSS_CHANNEL_LCD) ++ REG_FLD_MOD(DISPC_CONFIG, type, 11, 11); ++ else /* OMAP_DSS_CHANNEL_DIGIT */ ++ REG_FLD_MOD(DISPC_CONFIG, type, 13, 13); ++ ++ dispc_write_reg(tr_reg[ch], trans_key); ++ enable_clocks(0); ++} ++ ++void dispc_get_trans_key(enum omap_channel ch, ++ enum omap_dss_color_key_type *type, ++ u32 *trans_key) ++{ ++ const struct dispc_reg tr_reg[] = { ++ DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 }; ++ ++ enable_clocks(1); ++ if (type) { ++ if (ch == OMAP_DSS_CHANNEL_LCD) ++ *type = REG_GET(DISPC_CONFIG, 11, 11) >> 11; ++ else if (ch == OMAP_DSS_CHANNEL_DIGIT) ++ *type = REG_GET(DISPC_CONFIG, 13, 13) >> 13; ++ else ++ BUG(); ++ } ++ ++ if (trans_key) ++ *trans_key = dispc_read_reg(tr_reg[ch]); ++ enable_clocks(0); ++} ++ ++void dispc_enable_trans_key(enum omap_channel ch, bool enable) ++{ ++ enable_clocks(1); ++ if (ch == OMAP_DSS_CHANNEL_LCD) ++ REG_FLD_MOD(DISPC_CONFIG, enable, 10, 10); ++ else /* OMAP_DSS_CHANNEL_DIGIT */ ++ REG_FLD_MOD(DISPC_CONFIG, enable, 12, 12); ++ enable_clocks(0); ++} ++ ++bool dispc_trans_key_enabled(enum omap_channel ch) ++{ ++ bool enabled; ++ ++ enable_clocks(1); ++ if (ch == OMAP_DSS_CHANNEL_LCD) ++ enabled = REG_GET(DISPC_CONFIG, 10, 10); ++ else if (ch == OMAP_DSS_CHANNEL_DIGIT) ++ enabled = REG_GET(DISPC_CONFIG, 12, 12); ++ else BUG(); ++ enable_clocks(0); ++ ++ return enabled; ++} ++ ++ ++void dispc_set_tft_data_lines(u8 data_lines) ++{ ++ int code; ++ ++ switch (data_lines) { ++ case 12: ++ code = 0; ++ break; ++ case 16: ++ code = 1; ++ break; ++ case 18: ++ code = 2; ++ break; ++ case 24: ++ code = 3; ++ break; ++ default: ++ BUG(); ++ return; ++ } ++ ++ enable_clocks(1); ++ REG_FLD_MOD(DISPC_CONTROL, code, 9, 8); ++ enable_clocks(0); ++} ++ ++void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode) ++{ ++ u32 l; ++ int stallmode; ++ int gpout0 = 1; ++ int gpout1; ++ ++ switch (mode) { ++ case OMAP_DSS_PARALLELMODE_BYPASS: ++ stallmode = 0; ++ gpout1 = 1; ++ break; ++ ++ case OMAP_DSS_PARALLELMODE_RFBI: ++ stallmode = 1; ++ gpout1 = 0; ++ break; ++ ++ case OMAP_DSS_PARALLELMODE_DSI: ++ stallmode = 1; ++ gpout1 = 1; ++ break; ++ ++ default: ++ BUG(); ++ return; ++ } ++ ++ enable_clocks(1); ++ ++ l = dispc_read_reg(DISPC_CONTROL); ++ ++ l = FLD_MOD(l, stallmode, 11, 11); ++ l = FLD_MOD(l, gpout0, 15, 15); ++ l = FLD_MOD(l, gpout1, 16, 16); ++ ++ dispc_write_reg(DISPC_CONTROL, l); ++ ++ enable_clocks(0); ++} ++ ++static void _dispc_set_lcd_timings(int hsw, int hfp, int hbp, ++ int vsw, int vfp, int vbp) ++{ ++ u32 timing_h, timing_v; ++ ++ if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) { ++ BUG_ON(hsw < 1 || hsw > 64); ++ BUG_ON(hfp < 1 || hfp > 256); ++ BUG_ON(hbp < 1 || hbp > 256); ++ ++ BUG_ON(vsw < 1 || vsw > 64); ++ BUG_ON(vfp < 0 || vfp > 255); ++ BUG_ON(vbp < 0 || vbp > 255); ++ ++ timing_h = FLD_VAL(hsw-1, 5, 0) | FLD_VAL(hfp-1, 15, 8) | ++ FLD_VAL(hbp-1, 27, 20); ++ ++ timing_v = FLD_VAL(vsw-1, 5, 0) | FLD_VAL(vfp, 15, 8) | ++ FLD_VAL(vbp, 27, 20); ++ } else { ++ BUG_ON(hsw < 1 || hsw > 256); ++ BUG_ON(hfp < 1 || hfp > 4096); ++ BUG_ON(hbp < 1 || hbp > 4096); ++ ++ BUG_ON(vsw < 1 || vsw > 256); ++ BUG_ON(vfp < 0 || vfp > 4095); ++ BUG_ON(vbp < 0 || vbp > 4095); ++ ++ timing_h = FLD_VAL(hsw-1, 7, 0) | FLD_VAL(hfp-1, 19, 8) | ++ FLD_VAL(hbp-1, 31, 20); ++ ++ timing_v = FLD_VAL(vsw-1, 7, 0) | FLD_VAL(vfp, 19, 8) | ++ FLD_VAL(vbp, 31, 20); ++ } ++ ++ enable_clocks(1); ++ dispc_write_reg(DISPC_TIMING_H, timing_h); ++ dispc_write_reg(DISPC_TIMING_V, timing_v); ++ enable_clocks(0); ++} ++ ++/* change name to mode? */ ++void dispc_set_lcd_timings(struct omap_video_timings *timings) ++{ ++ unsigned xtot, ytot; ++ unsigned long ht, vt; ++ ++ _dispc_set_lcd_timings(timings->hsw, timings->hfp, timings->hbp, ++ timings->vsw, timings->vfp, timings->vbp); ++ ++ dispc_set_lcd_size(timings->x_res, timings->y_res); ++ ++ xtot = timings->x_res + timings->hfp + timings->hsw + timings->hbp; ++ ytot = timings->y_res + timings->vfp + timings->vsw + timings->vbp; ++ ++ ht = (timings->pixel_clock * 1000) / xtot; ++ vt = (timings->pixel_clock * 1000) / xtot / ytot; ++ ++ DSSDBG("xres %u yres %u\n", timings->x_res, timings->y_res); ++ DSSDBG("pck %u\n", timings->pixel_clock); ++ DSSDBG("hsw %d hfp %d hbp %d vsw %d vfp %d vbp %d\n", ++ timings->hsw, timings->hfp, timings->hbp, ++ timings->vsw, timings->vfp, timings->vbp); ++ ++ DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt); ++} ++ ++void dispc_set_lcd_divisor(u16 lck_div, u16 pck_div) ++{ ++ BUG_ON(lck_div < 1); ++ BUG_ON(pck_div < 2); ++ ++ enable_clocks(1); ++ dispc_write_reg(DISPC_DIVISOR, ++ FLD_VAL(lck_div, 23, 16) | FLD_VAL(pck_div, 7, 0)); ++ enable_clocks(0); ++} ++ ++static void dispc_get_lcd_divisor(int *lck_div, int *pck_div) ++{ ++ u32 l; ++ l = dispc_read_reg(DISPC_DIVISOR); ++ *lck_div = FLD_GET(l, 23, 16); ++ *pck_div = FLD_GET(l, 7, 0); ++} ++ ++unsigned long dispc_fclk_rate(void) ++{ ++ unsigned long r = 0; ++ ++ if (dss_get_dispc_clk_source() == 0) ++ r = dss_clk_get_rate(DSS_CLK_FCK1); ++ else ++#ifdef CONFIG_OMAP2_DSS_DSI ++ r = dsi_get_dsi1_pll_rate(); ++#else ++ BUG(); ++#endif ++ return r; ++} ++ ++unsigned long dispc_pclk_rate(void) ++{ ++ int lcd, pcd; ++ unsigned long r; ++ u32 l; ++ ++ l = dispc_read_reg(DISPC_DIVISOR); ++ ++ lcd = FLD_GET(l, 23, 16); ++ pcd = FLD_GET(l, 7, 0); ++ ++ r = dispc_fclk_rate(); ++ ++ return r / lcd / pcd; ++} ++ ++void dispc_dump_clocks(struct seq_file *s) ++{ ++ int lcd, pcd; ++ ++ enable_clocks(1); ++ ++ dispc_get_lcd_divisor(&lcd, &pcd); ++ ++ seq_printf(s, "- dispc -\n"); ++ ++ seq_printf(s, "dispc fclk source = %s\n", ++ dss_get_dispc_clk_source() == 0 ? ++ "dss1_alwon_fclk" : "dsi1_pll_fclk"); ++ ++ seq_printf(s, "pixel clk = %lu / %d / %d = %lu\n", ++ dispc_fclk_rate(), ++ lcd, pcd, ++ dispc_pclk_rate()); ++ ++ enable_clocks(0); ++} ++ ++void dispc_dump_regs(struct seq_file *s) ++{ ++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dispc_read_reg(r)) ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ DUMPREG(DISPC_REVISION); ++ DUMPREG(DISPC_SYSCONFIG); ++ DUMPREG(DISPC_SYSSTATUS); ++ DUMPREG(DISPC_IRQSTATUS); ++ DUMPREG(DISPC_IRQENABLE); ++ DUMPREG(DISPC_CONTROL); ++ DUMPREG(DISPC_CONFIG); ++ DUMPREG(DISPC_CAPABLE); ++ DUMPREG(DISPC_DEFAULT_COLOR0); ++ DUMPREG(DISPC_DEFAULT_COLOR1); ++ DUMPREG(DISPC_TRANS_COLOR0); ++ DUMPREG(DISPC_TRANS_COLOR1); ++ DUMPREG(DISPC_LINE_STATUS); ++ DUMPREG(DISPC_LINE_NUMBER); ++ DUMPREG(DISPC_TIMING_H); ++ DUMPREG(DISPC_TIMING_V); ++ DUMPREG(DISPC_POL_FREQ); ++ DUMPREG(DISPC_DIVISOR); ++ DUMPREG(DISPC_GLOBAL_ALPHA); ++ DUMPREG(DISPC_SIZE_DIG); ++ DUMPREG(DISPC_SIZE_LCD); ++ ++ DUMPREG(DISPC_GFX_BA0); ++ DUMPREG(DISPC_GFX_BA1); ++ DUMPREG(DISPC_GFX_POSITION); ++ DUMPREG(DISPC_GFX_SIZE); ++ DUMPREG(DISPC_GFX_ATTRIBUTES); ++ DUMPREG(DISPC_GFX_FIFO_THRESHOLD); ++ DUMPREG(DISPC_GFX_FIFO_SIZE_STATUS); ++ DUMPREG(DISPC_GFX_ROW_INC); ++ DUMPREG(DISPC_GFX_PIXEL_INC); ++ DUMPREG(DISPC_GFX_WINDOW_SKIP); ++ DUMPREG(DISPC_GFX_TABLE_BA); ++ ++ DUMPREG(DISPC_DATA_CYCLE1); ++ DUMPREG(DISPC_DATA_CYCLE2); ++ DUMPREG(DISPC_DATA_CYCLE3); ++ ++ DUMPREG(DISPC_CPR_COEF_R); ++ DUMPREG(DISPC_CPR_COEF_G); ++ DUMPREG(DISPC_CPR_COEF_B); ++ ++ DUMPREG(DISPC_GFX_PRELOAD); ++ ++ DUMPREG(DISPC_VID_BA0(0)); ++ DUMPREG(DISPC_VID_BA1(0)); ++ DUMPREG(DISPC_VID_POSITION(0)); ++ DUMPREG(DISPC_VID_SIZE(0)); ++ DUMPREG(DISPC_VID_ATTRIBUTES(0)); ++ DUMPREG(DISPC_VID_FIFO_THRESHOLD(0)); ++ DUMPREG(DISPC_VID_FIFO_SIZE_STATUS(0)); ++ DUMPREG(DISPC_VID_ROW_INC(0)); ++ DUMPREG(DISPC_VID_PIXEL_INC(0)); ++ DUMPREG(DISPC_VID_FIR(0)); ++ DUMPREG(DISPC_VID_PICTURE_SIZE(0)); ++ DUMPREG(DISPC_VID_ACCU0(0)); ++ DUMPREG(DISPC_VID_ACCU1(0)); ++ ++ DUMPREG(DISPC_VID_BA0(1)); ++ DUMPREG(DISPC_VID_BA1(1)); ++ DUMPREG(DISPC_VID_POSITION(1)); ++ DUMPREG(DISPC_VID_SIZE(1)); ++ DUMPREG(DISPC_VID_ATTRIBUTES(1)); ++ DUMPREG(DISPC_VID_FIFO_THRESHOLD(1)); ++ DUMPREG(DISPC_VID_FIFO_SIZE_STATUS(1)); ++ DUMPREG(DISPC_VID_ROW_INC(1)); ++ DUMPREG(DISPC_VID_PIXEL_INC(1)); ++ DUMPREG(DISPC_VID_FIR(1)); ++ DUMPREG(DISPC_VID_PICTURE_SIZE(1)); ++ DUMPREG(DISPC_VID_ACCU0(1)); ++ DUMPREG(DISPC_VID_ACCU1(1)); ++ ++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 0)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 1)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 2)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 3)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 4)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 5)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 6)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(0, 7)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 0)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 1)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 2)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 3)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 4)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 5)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 6)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(0, 7)); ++ DUMPREG(DISPC_VID_CONV_COEF(0, 0)); ++ DUMPREG(DISPC_VID_CONV_COEF(0, 1)); ++ DUMPREG(DISPC_VID_CONV_COEF(0, 2)); ++ DUMPREG(DISPC_VID_CONV_COEF(0, 3)); ++ DUMPREG(DISPC_VID_CONV_COEF(0, 4)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 0)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 1)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 2)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 3)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 4)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 5)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 6)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(0, 7)); ++ ++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 0)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 1)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 2)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 3)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 4)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 5)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 6)); ++ DUMPREG(DISPC_VID_FIR_COEF_H(1, 7)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 0)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 1)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 2)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 3)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 4)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 5)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 6)); ++ DUMPREG(DISPC_VID_FIR_COEF_HV(1, 7)); ++ DUMPREG(DISPC_VID_CONV_COEF(1, 0)); ++ DUMPREG(DISPC_VID_CONV_COEF(1, 1)); ++ DUMPREG(DISPC_VID_CONV_COEF(1, 2)); ++ DUMPREG(DISPC_VID_CONV_COEF(1, 3)); ++ DUMPREG(DISPC_VID_CONV_COEF(1, 4)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 0)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 1)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 2)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 3)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 4)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 5)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 6)); ++ DUMPREG(DISPC_VID_FIR_COEF_V(1, 7)); ++ ++ DUMPREG(DISPC_VID_PRELOAD(0)); ++ DUMPREG(DISPC_VID_PRELOAD(1)); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++#undef DUMPREG ++} ++ ++static void _dispc_set_pol_freq(bool onoff, bool rf, bool ieo, bool ipc, ++ bool ihs, bool ivs, u8 acbi, u8 acb) ++{ ++ u32 l = 0; ++ ++ DSSDBG("onoff %d rf %d ieo %d ipc %d ihs %d ivs %d acbi %d acb %d\n", ++ onoff, rf, ieo, ipc, ihs, ivs, acbi, acb); ++ ++ l |= FLD_VAL(onoff, 17, 17); ++ l |= FLD_VAL(rf, 16, 16); ++ l |= FLD_VAL(ieo, 15, 15); ++ l |= FLD_VAL(ipc, 14, 14); ++ l |= FLD_VAL(ihs, 13, 13); ++ l |= FLD_VAL(ivs, 12, 12); ++ l |= FLD_VAL(acbi, 11, 8); ++ l |= FLD_VAL(acb, 7, 0); ++ ++ enable_clocks(1); ++ dispc_write_reg(DISPC_POL_FREQ, l); ++ enable_clocks(0); ++} ++ ++void dispc_set_pol_freq(struct omap_panel *panel) ++{ ++ _dispc_set_pol_freq((panel->config & OMAP_DSS_LCD_ONOFF) != 0, ++ (panel->config & OMAP_DSS_LCD_RF) != 0, ++ (panel->config & OMAP_DSS_LCD_IEO) != 0, ++ (panel->config & OMAP_DSS_LCD_IPC) != 0, ++ (panel->config & OMAP_DSS_LCD_IHS) != 0, ++ (panel->config & OMAP_DSS_LCD_IVS) != 0, ++ panel->acbi, panel->acb); ++} ++ ++void find_lck_pck_divs(bool is_tft, unsigned long req_pck, unsigned long fck, ++ u16 *lck_div, u16 *pck_div) ++{ ++ u16 pcd_min = is_tft ? 2 : 3; ++ unsigned long best_pck; ++ u16 best_ld, cur_ld; ++ u16 best_pd, cur_pd; ++ ++ best_pck = 0; ++ best_ld = 0; ++ best_pd = 0; ++ ++ for (cur_ld = 1; cur_ld <= 255; ++cur_ld) { ++ unsigned long lck = fck / cur_ld; ++ ++ for (cur_pd = pcd_min; cur_pd <= 255; ++cur_pd) { ++ unsigned long pck = lck / cur_pd; ++ long old_delta = abs(best_pck - req_pck); ++ long new_delta = abs(pck - req_pck); ++ ++ if (best_pck == 0 || new_delta < old_delta) { ++ best_pck = pck; ++ best_ld = cur_ld; ++ best_pd = cur_pd; ++ ++ if (pck == req_pck) ++ goto found; ++ } ++ ++ if (pck < req_pck) ++ break; ++ } ++ ++ if (lck / pcd_min < req_pck) ++ break; ++ } ++ ++found: ++ *lck_div = best_ld; ++ *pck_div = best_pd; ++} ++ ++int dispc_calc_clock_div(bool is_tft, unsigned long req_pck, ++ struct dispc_clock_info *cinfo) ++{ ++ unsigned long prate; ++ struct dispc_clock_info cur, best; ++ int match = 0; ++ int min_fck_per_pck; ++ unsigned long fck_rate = dss_clk_get_rate(DSS_CLK_FCK1); ++ ++ if (cpu_is_omap34xx()) ++ prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck)); ++ else ++ prate = 0; ++ ++ if (req_pck == dispc.cache_req_pck && ++ ((cpu_is_omap34xx() && prate == dispc.cache_prate) || ++ dispc.cache_cinfo.fck == fck_rate)) { ++ DSSDBG("dispc clock info found from cache.\n"); ++ *cinfo = dispc.cache_cinfo; ++ return 0; ++ } ++ ++ min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK; ++ ++ if (min_fck_per_pck && ++ req_pck * min_fck_per_pck > DISPC_MAX_FCK) { ++ DSSERR("Requested pixel clock not possible with the current " ++ "OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning " ++ "the constraint off.\n"); ++ min_fck_per_pck = 0; ++ } ++ ++retry: ++ memset(&cur, 0, sizeof(cur)); ++ memset(&best, 0, sizeof(best)); ++ ++ if (cpu_is_omap24xx()) { ++ /* XXX can we change the clock on omap2? */ ++ cur.fck = dss_clk_get_rate(DSS_CLK_FCK1); ++ cur.fck_div = 1; ++ ++ match = 1; ++ ++ find_lck_pck_divs(is_tft, req_pck, cur.fck, ++ &cur.lck_div, &cur.pck_div); ++ ++ cur.lck = cur.fck / cur.lck_div; ++ cur.pck = cur.lck / cur.pck_div; ++ ++ best = cur; ++ ++ goto found; ++ } else if (cpu_is_omap34xx()) { ++ for (cur.fck_div = 16; cur.fck_div > 0; --cur.fck_div) { ++ cur.fck = prate / cur.fck_div * 2; ++ ++ if (cur.fck > DISPC_MAX_FCK) ++ continue; ++ ++ if (min_fck_per_pck && ++ cur.fck < req_pck * min_fck_per_pck) ++ continue; ++ ++ match = 1; ++ ++ find_lck_pck_divs(is_tft, req_pck, cur.fck, ++ &cur.lck_div, &cur.pck_div); ++ ++ cur.lck = cur.fck / cur.lck_div; ++ cur.pck = cur.lck / cur.pck_div; ++ ++ if (abs(cur.pck - req_pck) < abs(best.pck - req_pck)) { ++ best = cur; ++ ++ if (cur.pck == req_pck) ++ goto found; ++ } ++ } ++ } else { ++ BUG(); ++ } ++ ++found: ++ if (!match) { ++ if (min_fck_per_pck) { ++ DSSERR("Could not find suitable clock settings.\n" ++ "Turning FCK/PCK constraint off and" ++ "trying again.\n"); ++ min_fck_per_pck = 0; ++ goto retry; ++ } ++ ++ DSSERR("Could not find suitable clock settings.\n"); ++ ++ return -EINVAL; ++ } ++ ++ if (cinfo) ++ *cinfo = best; ++ ++ dispc.cache_req_pck = req_pck; ++ dispc.cache_prate = prate; ++ dispc.cache_cinfo = best; ++ ++ return 0; ++} ++ ++int dispc_set_clock_div(struct dispc_clock_info *cinfo) ++{ ++ unsigned long prate; ++ int r; ++ ++ if (cpu_is_omap34xx()) { ++ prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck)); ++ DSSDBG("dpll4_m4 = %ld\n", prate); ++ } ++ ++ DSSDBG("fck = %ld (%d)\n", cinfo->fck, cinfo->fck_div); ++ DSSDBG("lck = %ld (%d)\n", cinfo->lck, cinfo->lck_div); ++ DSSDBG("pck = %ld (%d)\n", cinfo->pck, cinfo->pck_div); ++ ++ if (cpu_is_omap34xx()) { ++ r = clk_set_rate(dispc.dpll4_m4_ck, prate / cinfo->fck_div); ++ if (r) ++ return r; ++ } ++ ++ dispc_set_lcd_divisor(cinfo->lck_div, cinfo->pck_div); ++ ++ return 0; ++} ++ ++int dispc_get_clock_div(struct dispc_clock_info *cinfo) ++{ ++ cinfo->fck = dss_clk_get_rate(DSS_CLK_FCK1); ++ ++ if (cpu_is_omap34xx()) { ++ unsigned long prate; ++ prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck)); ++ cinfo->fck_div = prate / (cinfo->fck / 2); ++ } else { ++ cinfo->fck_div = 0; ++ } ++ ++ cinfo->lck_div = REG_GET(DISPC_DIVISOR, 23, 16); ++ cinfo->pck_div = REG_GET(DISPC_DIVISOR, 7, 0); ++ ++ cinfo->lck = cinfo->fck / cinfo->lck_div; ++ cinfo->pck = cinfo->lck / cinfo->pck_div; ++ ++ return 0; ++} ++ ++static void omap_dispc_set_irqs(void) ++{ ++ unsigned long flags; ++ u32 mask = dispc.irq_error_mask; ++ int i; ++ struct omap_dispc_isr_data *isr_data; ++ ++ spin_lock_irqsave(&dispc.irq_lock, flags); ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ isr_data = &dispc.registered_isr[i]; ++ ++ if (isr_data->isr == NULL) ++ continue; ++ ++ mask |= isr_data->mask; ++ } ++ ++ enable_clocks(1); ++ dispc_write_reg(DISPC_IRQENABLE, mask); ++ enable_clocks(0); ++ ++ spin_unlock_irqrestore(&dispc.irq_lock, flags); ++} ++ ++int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask) ++{ ++ int i; ++ int ret; ++ unsigned long flags; ++ struct omap_dispc_isr_data *isr_data; ++ ++ if (isr == NULL) ++ return -EINVAL; ++ ++ spin_lock_irqsave(&dispc.irq_lock, flags); ++ ++ /* check for duplicate entry */ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ isr_data = &dispc.registered_isr[i]; ++ if (isr_data->isr == isr && isr_data->arg == arg && ++ isr_data->mask == mask) { ++ ret = -EINVAL; ++ goto err; ++ } ++ } ++ ++ isr_data = NULL; ++ ret = -EBUSY; ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ isr_data = &dispc.registered_isr[i]; ++ ++ if (isr_data->isr != NULL) ++ continue; ++ ++ isr_data->isr = isr; ++ isr_data->arg = arg; ++ isr_data->mask = mask; ++ ret = 0; ++ ++ break; ++ } ++err: ++ spin_unlock_irqrestore(&dispc.irq_lock, flags); ++ ++ if (ret == 0) ++ omap_dispc_set_irqs(); ++ ++ return ret; ++} ++EXPORT_SYMBOL(omap_dispc_register_isr); ++ ++int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask) ++{ ++ int i; ++ unsigned long flags; ++ int ret = -EINVAL; ++ struct omap_dispc_isr_data *isr_data; ++ ++ spin_lock_irqsave(&dispc.irq_lock, flags); ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ isr_data = &dispc.registered_isr[i]; ++ if (isr_data->isr != isr || isr_data->arg != arg || ++ isr_data->mask != mask) ++ continue; ++ ++ /* found the correct isr */ ++ ++ isr_data->isr = NULL; ++ isr_data->arg = NULL; ++ isr_data->mask = 0; ++ ++ ret = 0; ++ break; ++ } ++ ++ spin_unlock_irqrestore(&dispc.irq_lock, flags); ++ ++ if (ret == 0) ++ omap_dispc_set_irqs(); ++ ++ return ret; ++} ++EXPORT_SYMBOL(omap_dispc_unregister_isr); ++ ++#ifdef DEBUG ++static void print_irq_status(u32 status) ++{ ++ if ((status & dispc.irq_error_mask) == 0) ++ return; ++ ++ printk(KERN_DEBUG "DISPC IRQ: 0x%x: ", status); ++ ++#define PIS(x) \ ++ if (status & DISPC_IRQ_##x) \ ++ printk(#x " "); ++ PIS(GFX_FIFO_UNDERFLOW); ++ PIS(OCP_ERR); ++ PIS(VID1_FIFO_UNDERFLOW); ++ PIS(VID2_FIFO_UNDERFLOW); ++ PIS(SYNC_LOST); ++ PIS(SYNC_LOST_DIGIT); ++#undef PIS ++ ++ printk("\n"); ++} ++#endif ++ ++/* Called from dss.c. Note that we don't touch clocks here, ++ * but we presume they are on because we got an IRQ. However, ++ * an irq handler may turn the clocks off, so we may not have ++ * clock later in the function. */ ++void dispc_irq_handler(void) ++{ ++ int i; ++ u32 irqstatus = dispc_read_reg(DISPC_IRQSTATUS); ++ u32 handledirqs = 0; ++ u32 unhandled_errors; ++ struct omap_dispc_isr_data *isr_data; ++ ++#ifdef DEBUG ++ if (dss_debug) ++ print_irq_status(irqstatus); ++#endif ++ /* Ack the interrupt. Do it here before clocks are possibly turned ++ * off */ ++ dispc_write_reg(DISPC_IRQSTATUS, irqstatus); ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ isr_data = &dispc.registered_isr[i]; ++ ++ if (!isr_data->isr) ++ continue; ++ ++ if (isr_data->mask & irqstatus) { ++ isr_data->isr(isr_data->arg, irqstatus); ++ handledirqs |= isr_data->mask; ++ } ++ } ++ ++ unhandled_errors = irqstatus & ~handledirqs & dispc.irq_error_mask; ++ ++ if (unhandled_errors) { ++ spin_lock(&dispc.error_lock); ++ dispc.error_irqs |= unhandled_errors; ++ spin_unlock(&dispc.error_lock); ++ ++ dispc.irq_error_mask &= ~unhandled_errors; ++ omap_dispc_set_irqs(); ++ ++ schedule_work(&dispc.error_work); ++ } ++} ++ ++static void dispc_error_worker(struct work_struct *work) ++{ ++ int i; ++ u32 errors; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&dispc.error_lock, flags); ++ errors = dispc.error_irqs; ++ dispc.error_irqs = 0; ++ spin_unlock_irqrestore(&dispc.error_lock, flags); ++ ++ if (errors & DISPC_IRQ_GFX_FIFO_UNDERFLOW) { ++ DSSERR("GFX_FIFO_UNDERFLOW, disabling GFX\n"); ++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) { ++ struct omap_overlay *ovl; ++ ovl = omap_dss_get_overlay(i); ++ ++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) ++ continue; ++ ++ if (ovl->id == 0) { ++ dispc_enable_plane(ovl->id, 0); ++ dispc_go(ovl->manager->id); ++ mdelay(50); ++ break; ++ } ++ } ++ } ++ ++ if (errors & DISPC_IRQ_VID1_FIFO_UNDERFLOW) { ++ DSSERR("VID1_FIFO_UNDERFLOW, disabling VID1\n"); ++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) { ++ struct omap_overlay *ovl; ++ ovl = omap_dss_get_overlay(i); ++ ++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) ++ continue; ++ ++ if (ovl->id == 1) { ++ dispc_enable_plane(ovl->id, 0); ++ dispc_go(ovl->manager->id); ++ mdelay(50); ++ break; ++ } ++ } ++ } ++ ++ if (errors & DISPC_IRQ_VID2_FIFO_UNDERFLOW) { ++ DSSERR("VID2_FIFO_UNDERFLOW, disabling VID2\n"); ++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) { ++ struct omap_overlay *ovl; ++ ovl = omap_dss_get_overlay(i); ++ ++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) ++ continue; ++ ++ if (ovl->id == 2) { ++ dispc_enable_plane(ovl->id, 0); ++ dispc_go(ovl->manager->id); ++ mdelay(50); ++ break; ++ } ++ } ++ } ++ ++ if (errors & DISPC_IRQ_SYNC_LOST) { ++ DSSERR("SYNC_LOST, disabling LCD\n"); ++ for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { ++ struct omap_overlay_manager *mgr; ++ mgr = omap_dss_get_overlay_manager(i); ++ ++ if (mgr->id == OMAP_DSS_CHANNEL_LCD) { ++ mgr->display->disable(mgr->display); ++ break; ++ } ++ } ++ } ++ ++ if (errors & DISPC_IRQ_SYNC_LOST_DIGIT) { ++ DSSERR("SYNC_LOST_DIGIT, disabling TV\n"); ++ for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { ++ struct omap_overlay_manager *mgr; ++ mgr = omap_dss_get_overlay_manager(i); ++ ++ if (mgr->id == OMAP_DSS_CHANNEL_DIGIT) { ++ mgr->display->disable(mgr->display); ++ break; ++ } ++ } ++ } ++ ++ if (errors & DISPC_IRQ_OCP_ERR) { ++ DSSERR("OCP_ERR\n"); ++ for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { ++ struct omap_overlay_manager *mgr; ++ mgr = omap_dss_get_overlay_manager(i); ++ ++ if (mgr->caps & OMAP_DSS_OVL_CAP_DISPC) ++ mgr->display->disable(mgr->display); ++ } ++ } ++ ++ dispc.irq_error_mask |= errors; ++ omap_dispc_set_irqs(); ++} ++ ++int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout) ++{ ++ void dispc_irq_wait_handler(void *data, u32 mask) ++ { ++ complete((struct completion *)data); ++ } ++ ++ int r; ++ DECLARE_COMPLETION_ONSTACK(completion); ++ ++ r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion, ++ irqmask); ++ ++ if (r) ++ return r; ++ ++ timeout = wait_for_completion_timeout(&completion, timeout); ++ ++ omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask); ++ ++ if (timeout == 0) ++ return -ETIMEDOUT; ++ ++ if (timeout == -ERESTARTSYS) ++ return -ERESTARTSYS; ++ ++ return 0; ++} ++ ++int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask, ++ unsigned long timeout) ++{ ++ void dispc_irq_wait_handler(void *data, u32 mask) ++ { ++ complete((struct completion *)data); ++ } ++ ++ int r; ++ DECLARE_COMPLETION_ONSTACK(completion); ++ ++ r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion, ++ irqmask); ++ ++ if (r) ++ return r; ++ ++ timeout = wait_for_completion_interruptible_timeout(&completion, ++ timeout); ++ ++ omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask); ++ ++ if (timeout == 0) ++ return -ETIMEDOUT; ++ ++ if (timeout == -ERESTARTSYS) ++ return -ERESTARTSYS; ++ ++ return 0; ++} ++ ++#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC ++void dispc_fake_vsync_irq(void) ++{ ++ u32 irqstatus = DISPC_IRQ_VSYNC; ++ int i; ++ ++ for (i = 0; i < DISPC_MAX_NR_ISRS; i++) { ++ struct omap_dispc_isr_data *isr_data; ++ isr_data = &dispc.registered_isr[i]; ++ ++ if (!isr_data->isr) ++ continue; ++ ++ if (isr_data->mask & irqstatus) ++ isr_data->isr(isr_data->arg, irqstatus); ++ } ++} ++#endif ++ ++static void _omap_dispc_initialize_irq(void) ++{ ++ memset(dispc.registered_isr, 0, sizeof(dispc.registered_isr)); ++ ++ dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR; ++ ++ /* there's SYNC_LOST_DIGIT waiting after enabling the DSS, ++ * so clear it */ ++ dispc_write_reg(DISPC_IRQSTATUS, dispc_read_reg(DISPC_IRQSTATUS)); ++ ++ omap_dispc_set_irqs(); ++} ++ ++static void _omap_dispc_initial_config(void) ++{ ++ u32 l; ++ ++ l = dispc_read_reg(DISPC_SYSCONFIG); ++ l = FLD_MOD(l, 2, 13, 12); /* MIDLEMODE: smart standby */ ++ l = FLD_MOD(l, 2, 4, 3); /* SIDLEMODE: smart idle */ ++ l = FLD_MOD(l, 1, 2, 2); /* ENWAKEUP */ ++ l = FLD_MOD(l, 1, 0, 0); /* AUTOIDLE */ ++ dispc_write_reg(DISPC_SYSCONFIG, l); ++ ++ /* FUNCGATED */ ++ REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9); ++ ++ /* L3 firewall setting: enable access to OCM RAM */ ++ if (cpu_is_omap24xx()) ++ __raw_writel(0x402000b0, IO_ADDRESS(0x680050a0)); ++ ++ _dispc_setup_color_conv_coef(); ++ ++ dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY); ++} ++ ++int dispc_init(void) ++{ ++ u32 rev; ++ ++ spin_lock_init(&dispc.irq_lock); ++ spin_lock_init(&dispc.error_lock); ++ ++ INIT_WORK(&dispc.error_work, dispc_error_worker); ++ ++ dispc.base = ioremap(DISPC_BASE, DISPC_SZ_REGS); ++ if (!dispc.base) { ++ DSSERR("can't ioremap DISPC\n"); ++ return -ENOMEM; ++ } ++ ++ if (cpu_is_omap34xx()) { ++ dispc.dpll4_m4_ck = clk_get(NULL, "dpll4_m4_ck"); ++ if (IS_ERR(dispc.dpll4_m4_ck)) { ++ DSSERR("Failed to get dpll4_m4_ck\n"); ++ return -ENODEV; ++ } ++ } ++ ++ enable_clocks(1); ++ ++ _omap_dispc_initial_config(); ++ ++ _omap_dispc_initialize_irq(); ++ ++ dispc_save_context(); ++ ++ rev = dispc_read_reg(DISPC_REVISION); ++ printk(KERN_INFO "OMAP DISPC rev %d.%d\n", ++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); ++ ++ enable_clocks(0); ++ ++ return 0; ++} ++ ++void dispc_exit(void) ++{ ++ if (cpu_is_omap34xx()) ++ clk_put(dispc.dpll4_m4_ck); ++ iounmap(dispc.base); ++} ++ ++int dispc_enable_plane(enum omap_plane plane, bool enable) ++{ ++ DSSDBG("dispc_enable_plane %d, %d\n", plane, enable); ++ ++ enable_clocks(1); ++ _dispc_enable_plane(plane, enable); ++ enable_clocks(0); ++ ++ return 0; ++} ++ ++int dispc_setup_plane(enum omap_plane plane, enum omap_channel channel_out, ++ u32 paddr, u16 screen_width, ++ u16 pos_x, u16 pos_y, ++ u16 width, u16 height, ++ u16 out_width, u16 out_height, ++ enum omap_color_mode color_mode, ++ bool ilace, ++ u8 rotation, bool mirror) ++{ ++ int r = 0; ++ ++ DSSDBG("dispc_setup_plane %d, ch %d, pa %x, sw %d, %d,%d, %dx%d -> " ++ "%dx%d, ilace %d, cmode %x, rot %d, mir %d\n", ++ plane, channel_out, paddr, screen_width, pos_x, pos_y, ++ width, height, ++ out_width, out_height, ++ ilace, color_mode, ++ rotation, mirror); ++ ++ enable_clocks(1); ++ ++ r = _dispc_setup_plane(plane, channel_out, ++ paddr, screen_width, ++ pos_x, pos_y, ++ width, height, ++ out_width, out_height, ++ color_mode, ilace, ++ rotation, mirror); ++ ++ enable_clocks(0); ++ ++ return r; ++} ++ ++static int dispc_is_intersecting(int x1, int y1, int w1, int h1, ++ int x2, int y2, int w2, int h2) ++{ ++ if (x1 >= (x2+w2)) ++ return 0; ++ ++ if ((x1+w1) <= x2) ++ return 0; ++ ++ if (y1 >= (y2+h2)) ++ return 0; ++ ++ if ((y1+h1) <= y2) ++ return 0; ++ ++ return 1; ++} ++ ++static int dispc_is_overlay_scaled(struct omap_overlay_info *pi) ++{ ++ if (pi->width != pi->out_width) ++ return 1; ++ ++ if (pi->height != pi->out_height) ++ return 1; ++ ++ return 0; ++} ++ ++/* returns the area that needs updating */ ++void dispc_setup_partial_planes(struct omap_display *display, ++ u16 *xi, u16 *yi, u16 *wi, u16 *hi) ++{ ++ struct omap_overlay_manager *mgr; ++ int i; ++ ++ int x, y, w, h; ++ ++ x = *xi; ++ y = *yi; ++ w = *wi; ++ h = *hi; ++ ++ DSSDBG("dispc_setup_partial_planes %d,%d %dx%d\n", ++ *xi, *yi, *wi, *hi); ++ ++ ++ mgr = display->manager; ++ ++ if (!mgr) { ++ DSSDBG("no manager\n"); ++ return; ++ } ++ ++ for (i = 0; i < mgr->num_overlays; i++) { ++ struct omap_overlay *ovl; ++ struct omap_overlay_info *pi; ++ ovl = mgr->overlays[i]; ++ ++ if (ovl->manager != mgr) ++ continue; ++ ++ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) ++ continue; ++ ++ pi = &ovl->info; ++ ++ if (!pi->enabled) ++ continue; ++ /* ++ * If the plane is intersecting and scaled, we ++ * enlarge the update region to accomodate the ++ * whole area ++ */ ++ ++ if (dispc_is_intersecting(x, y, w, h, ++ pi->pos_x, pi->pos_y, ++ pi->out_width, pi->out_height)) { ++ if (dispc_is_overlay_scaled(pi)) { ++ ++ int x1, y1, x2, y2; ++ ++ if (x > pi->pos_x) ++ x1 = pi->pos_x; ++ else ++ x1 = x; ++ ++ if (y > pi->pos_y) ++ y1 = pi->pos_y; ++ else ++ y1 = y; ++ ++ if ((x + w) < (pi->pos_x + pi->out_width)) ++ x2 = pi->pos_x + pi->out_width; ++ else ++ x2 = x + w; ++ ++ if ((y + h) < (pi->pos_y + pi->out_height)) ++ y2 = pi->pos_y + pi->out_height; ++ else ++ y2 = y + h; ++ ++ x = x1; ++ y = y1; ++ w = x2 - x1; ++ h = y2 - y1; ++ ++ DSSDBG("Update area after enlarge due to " ++ "scaling %d, %d %dx%d\n", ++ x, y, w, h); ++ } ++ } ++ } ++ ++ for (i = 0; i < mgr->num_overlays; i++) { ++ struct omap_overlay *ovl = mgr->overlays[i]; ++ struct omap_overlay_info *pi = &ovl->info; ++ ++ int px = pi->pos_x; ++ int py = pi->pos_y; ++ int pw = pi->width; ++ int ph = pi->height; ++ int pow = pi->out_width; ++ int poh = pi->out_height; ++ u32 pa = pi->paddr; ++ int psw = pi->screen_width; ++ int bpp; ++ ++ if (ovl->manager != mgr) ++ continue; ++ ++ /* ++ * If plane is not enabled or the update region ++ * does not intersect with the plane in question, ++ * we really disable the plane from hardware ++ */ ++ ++ if (!pi->enabled || ++ !dispc_is_intersecting(x, y, w, h, ++ px, py, pow, poh)) { ++ dispc_enable_plane(ovl->id, 0); ++ continue; ++ } ++ ++ switch (pi->color_mode) { ++ case OMAP_DSS_COLOR_RGB16: ++ case OMAP_DSS_COLOR_ARGB16: ++ case OMAP_DSS_COLOR_YUV2: ++ case OMAP_DSS_COLOR_UYVY: ++ bpp = 16; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24P: ++ bpp = 24; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24U: ++ case OMAP_DSS_COLOR_ARGB32: ++ case OMAP_DSS_COLOR_RGBA32: ++ case OMAP_DSS_COLOR_RGBX32: ++ bpp = 32; ++ break; ++ ++ default: ++ BUG(); ++ return; ++ } ++ ++ if (x > pi->pos_x) { ++ px = 0; ++ pw -= (x - pi->pos_x); ++ pa += (x - pi->pos_x) * bpp / 8; ++ } else { ++ px = pi->pos_x - x; ++ } ++ ++ if (y > pi->pos_y) { ++ py = 0; ++ ph -= (y - pi->pos_y); ++ pa += (y - pi->pos_y) * psw * bpp / 8; ++ } else { ++ py = pi->pos_y - y; ++ } ++ ++ if (w < (px+pw)) ++ pw -= (px+pw) - (w); ++ ++ if (h < (py+ph)) ++ ph -= (py+ph) - (h); ++ ++ /* Can't scale the GFX plane */ ++ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0 || ++ dispc_is_overlay_scaled(pi) == 0) { ++ pow = pw; ++ poh = ph; ++ } ++ ++ DSSDBG("calc plane %d, %x, sw %d, %d,%d, %dx%d -> %dx%d\n", ++ ovl->id, pa, psw, px, py, pw, ph, pow, poh); ++ ++ dispc_setup_plane(ovl->id, mgr->id, ++ pa, psw, ++ px, py, ++ pw, ph, ++ pow, poh, ++ pi->color_mode, 0, ++ pi->rotation, // XXX rotation probably wrong ++ pi->mirror); ++ ++ dispc_enable_plane(ovl->id, 1); ++ } ++ ++ *xi = x; ++ *yi = y; ++ *wi = w; ++ *hi = h; ++ ++} ++ +diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c +new file mode 100644 +index 0000000..9aaf392 +--- /dev/null ++++ b/drivers/video/omap2/dss/display.c +@@ -0,0 +1,693 @@ ++/* ++ * linux/drivers/video/omap2/dss/display.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "DISPLAY" ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include "dss.h" ++ ++static int num_displays; ++static LIST_HEAD(display_list); ++ ++static ssize_t display_name_show(struct omap_display *display, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%s\n", display->name); ++} ++ ++static ssize_t display_enabled_show(struct omap_display *display, char *buf) ++{ ++ bool enabled = display->state != OMAP_DSS_DISPLAY_DISABLED; ++ ++ return snprintf(buf, PAGE_SIZE, "%d\n", enabled); ++} ++ ++static ssize_t display_enabled_store(struct omap_display *display, ++ const char *buf, size_t size) ++{ ++ bool enabled, r; ++ ++ enabled = simple_strtoul(buf, NULL, 10); ++ ++ if (enabled != (display->state != OMAP_DSS_DISPLAY_DISABLED)) { ++ if (enabled) { ++ r = display->enable(display); ++ if (r) ++ return r; ++ } else { ++ display->disable(display); ++ } ++ } ++ ++ return size; ++} ++ ++static ssize_t display_upd_mode_show(struct omap_display *display, char *buf) ++{ ++ enum omap_dss_update_mode mode = OMAP_DSS_UPDATE_AUTO; ++ if (display->get_update_mode) ++ mode = display->get_update_mode(display); ++ return snprintf(buf, PAGE_SIZE, "%d\n", mode); ++} ++ ++static ssize_t display_upd_mode_store(struct omap_display *display, ++ const char *buf, size_t size) ++{ ++ int val, r; ++ enum omap_dss_update_mode mode; ++ ++ val = simple_strtoul(buf, NULL, 10); ++ ++ switch (val) { ++ case OMAP_DSS_UPDATE_DISABLED: ++ case OMAP_DSS_UPDATE_AUTO: ++ case OMAP_DSS_UPDATE_MANUAL: ++ mode = (enum omap_dss_update_mode)val; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ if ((r = display->set_update_mode(display, mode))) ++ return r; ++ ++ return size; ++} ++ ++static ssize_t display_tear_show(struct omap_display *display, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d\n", ++ display->get_te ? display->get_te(display) : 0); ++} ++ ++static ssize_t display_tear_store(struct omap_display *display, ++ const char *buf, size_t size) ++{ ++ unsigned long te; ++ int r; ++ ++ if (!display->enable_te || !display->get_te) ++ return -ENOENT; ++ ++ te = simple_strtoul(buf, NULL, 0); ++ ++ if ((r = display->enable_te(display, te))) ++ return r; ++ ++ return size; ++} ++ ++static ssize_t display_timings_show(struct omap_display *display, char *buf) ++{ ++ struct omap_video_timings t; ++ ++ if (!display->get_timings) ++ return -ENOENT; ++ ++ display->get_timings(display, &t); ++ ++ return snprintf(buf, PAGE_SIZE, "%u,%u/%u/%u/%u,%u/%u/%u/%u\n", ++ t.pixel_clock, ++ t.x_res, t.hfp, t.hbp, t.hsw, ++ t.y_res, t.vfp, t.vbp, t.vsw); ++} ++ ++static ssize_t display_timings_store(struct omap_display *display, ++ const char *buf, size_t size) ++{ ++ struct omap_video_timings t; ++ int r, found; ++ ++ if (!display->set_timings || !display->check_timings) ++ return -ENOENT; ++ ++ found = 0; ++#ifdef CONFIG_OMAP2_DSS_VENC ++ if (strncmp("pal", buf, 3) == 0) { ++ t = omap_dss_pal_timings; ++ found = 1; ++ } else if (strncmp("ntsc", buf, 4) == 0) { ++ t = omap_dss_ntsc_timings; ++ found = 1; ++ } ++#endif ++ if (!found && sscanf(buf, "%u,%hu/%hu/%hu/%hu,%hu/%hu/%hu/%hu", ++ &t.pixel_clock, ++ &t.x_res, &t.hfp, &t.hbp, &t.hsw, ++ &t.y_res, &t.vfp, &t.vbp, &t.vsw) != 9) ++ return -EINVAL; ++ ++ if ((r = display->check_timings(display, &t))) ++ return r; ++ ++ display->set_timings(display, &t); ++ ++ return size; ++} ++ ++static ssize_t display_rotate_show(struct omap_display *display, char *buf) ++{ ++ int rotate; ++ if (!display->get_rotate) ++ return -ENOENT; ++ rotate = display->get_rotate(display); ++ return snprintf(buf, PAGE_SIZE, "%u\n", rotate); ++} ++ ++static ssize_t display_rotate_store(struct omap_display *display, ++ const char *buf, size_t size) ++{ ++ unsigned long rot; ++ int r; ++ ++ if (!display->set_rotate || !display->get_rotate) ++ return -ENOENT; ++ ++ rot = simple_strtoul(buf, NULL, 0); ++ ++ if ((r = display->set_rotate(display, rot))) ++ return r; ++ ++ return size; ++} ++ ++static ssize_t display_mirror_show(struct omap_display *display, char *buf) ++{ ++ int mirror; ++ if (!display->get_mirror) ++ return -ENOENT; ++ mirror = display->get_mirror(display); ++ return snprintf(buf, PAGE_SIZE, "%u\n", mirror); ++} ++ ++static ssize_t display_mirror_store(struct omap_display *display, ++ const char *buf, size_t size) ++{ ++ unsigned long mirror; ++ int r; ++ ++ if (!display->set_mirror || !display->get_mirror) ++ return -ENOENT; ++ ++ mirror = simple_strtoul(buf, NULL, 0); ++ ++ if ((r = display->set_mirror(display, mirror))) ++ return r; ++ ++ return size; ++} ++ ++static ssize_t display_panel_name_show(struct omap_display *display, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%s\n", ++ display->panel ? display->panel->name : ""); ++} ++ ++static ssize_t display_ctrl_name_show(struct omap_display *display, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%s\n", ++ display->ctrl ? display->ctrl->name : ""); ++} ++ ++struct display_attribute { ++ struct attribute attr; ++ ssize_t (*show)(struct omap_display *, char *); ++ ssize_t (*store)(struct omap_display *, const char *, size_t); ++}; ++ ++#define DISPLAY_ATTR(_name, _mode, _show, _store) \ ++ struct display_attribute display_attr_##_name = \ ++ __ATTR(_name, _mode, _show, _store) ++ ++static DISPLAY_ATTR(name, S_IRUGO, display_name_show, NULL); ++static DISPLAY_ATTR(enabled, S_IRUGO|S_IWUSR, ++ display_enabled_show, display_enabled_store); ++static DISPLAY_ATTR(update_mode, S_IRUGO|S_IWUSR, ++ display_upd_mode_show, display_upd_mode_store); ++static DISPLAY_ATTR(tear_elim, S_IRUGO|S_IWUSR, ++ display_tear_show, display_tear_store); ++static DISPLAY_ATTR(timings, S_IRUGO|S_IWUSR, ++ display_timings_show, display_timings_store); ++static DISPLAY_ATTR(rotate, S_IRUGO|S_IWUSR, ++ display_rotate_show, display_rotate_store); ++static DISPLAY_ATTR(mirror, S_IRUGO|S_IWUSR, ++ display_mirror_show, display_mirror_store); ++static DISPLAY_ATTR(panel_name, S_IRUGO, display_panel_name_show, NULL); ++static DISPLAY_ATTR(ctrl_name, S_IRUGO, display_ctrl_name_show, NULL); ++ ++static struct attribute *display_sysfs_attrs[] = { ++ &display_attr_name.attr, ++ &display_attr_enabled.attr, ++ &display_attr_update_mode.attr, ++ &display_attr_tear_elim.attr, ++ &display_attr_timings.attr, ++ &display_attr_rotate.attr, ++ &display_attr_mirror.attr, ++ &display_attr_panel_name.attr, ++ &display_attr_ctrl_name.attr, ++ NULL ++}; ++ ++static ssize_t display_attr_show(struct kobject *kobj, struct attribute *attr, char *buf) ++{ ++ struct omap_display *display; ++ struct display_attribute *display_attr; ++ ++ display = container_of(kobj, struct omap_display, kobj); ++ display_attr = container_of(attr, struct display_attribute, attr); ++ ++ if (!display_attr->show) ++ return -ENOENT; ++ ++ return display_attr->show(display, buf); ++} ++ ++static ssize_t display_attr_store(struct kobject *kobj, struct attribute *attr, ++ const char *buf, size_t size) ++{ ++ struct omap_display *display; ++ struct display_attribute *display_attr; ++ ++ display = container_of(kobj, struct omap_display, kobj); ++ display_attr = container_of(attr, struct display_attribute, attr); ++ ++ if (!display_attr->store) ++ return -ENOENT; ++ ++ return display_attr->store(display, buf, size); ++} ++ ++static struct sysfs_ops display_sysfs_ops = { ++ .show = display_attr_show, ++ .store = display_attr_store, ++}; ++ ++static struct kobj_type display_ktype = { ++ .sysfs_ops = &display_sysfs_ops, ++ .default_attrs = display_sysfs_attrs, ++}; ++ ++static void default_get_resolution(struct omap_display *display, ++ u16 *xres, u16 *yres) ++{ ++ *xres = display->panel->timings.x_res; ++ *yres = display->panel->timings.y_res; ++} ++ ++static void default_configure_overlay(struct omap_overlay *ovl) ++{ ++ unsigned low, high, size; ++ enum omap_burst_size burst; ++ enum omap_plane plane = ovl->id; ++ ++ burst = OMAP_DSS_BURST_16x32; ++ size = 16 * 32 / 8; ++ ++ dispc_set_burst_size(plane, burst); ++ ++ high = dispc_get_plane_fifo_size(plane) - 1; ++ low = dispc_get_plane_fifo_size(plane) - size; ++ ++ dispc_setup_plane_fifo(plane, low, high); ++} ++ ++static int default_wait_vsync(struct omap_display *display) ++{ ++ unsigned long timeout = msecs_to_jiffies(500); ++ u32 irq; ++ ++ if (display->type == OMAP_DISPLAY_TYPE_VENC) ++ irq = DISPC_IRQ_EVSYNC_ODD; ++ else ++ irq = DISPC_IRQ_VSYNC; ++ ++ return omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout); ++} ++ ++static int default_get_recommended_bpp(struct omap_display *display) ++{ ++ if (display->panel->recommended_bpp) ++ return display->panel->recommended_bpp; ++ ++ switch (display->type) { ++ case OMAP_DISPLAY_TYPE_DPI: ++ if (display->hw_config.u.dpi.data_lines == 24) ++ return 24; ++ else ++ return 16; ++ ++ case OMAP_DISPLAY_TYPE_DBI: ++ case OMAP_DISPLAY_TYPE_DSI: ++ if (display->ctrl->pixel_size == 24) ++ return 24; ++ else ++ return 16; ++ case OMAP_DISPLAY_TYPE_VENC: ++ case OMAP_DISPLAY_TYPE_SDI: ++ return 24; ++ return 24; ++ default: ++ BUG(); ++ } ++} ++ ++void dss_init_displays(struct platform_device *pdev) ++{ ++ struct omap_dss_board_info *pdata = pdev->dev.platform_data; ++ int i, r; ++ ++ INIT_LIST_HEAD(&display_list); ++ ++ num_displays = 0; ++ ++ for (i = 0; i < pdata->num_displays; ++i) { ++ struct omap_display *display; ++ ++ switch (pdata->displays[i]->type) { ++ case OMAP_DISPLAY_TYPE_DPI: ++#ifdef CONFIG_OMAP2_DSS_RFBI ++ case OMAP_DISPLAY_TYPE_DBI: ++#endif ++#ifdef CONFIG_OMAP2_DSS_SDI ++ case OMAP_DISPLAY_TYPE_SDI: ++#endif ++#ifdef CONFIG_OMAP2_DSS_DSI ++ case OMAP_DISPLAY_TYPE_DSI: ++#endif ++#ifdef CONFIG_OMAP2_DSS_VENC ++ case OMAP_DISPLAY_TYPE_VENC: ++#endif ++ break; ++ default: ++ DSSERR("Support for display '%s' not compiled in.\n", ++ pdata->displays[i]->name); ++ continue; ++ } ++ ++ display = kzalloc(sizeof(*display), GFP_KERNEL); ++ ++ /*atomic_set(&display->ref_count, 0);*/ ++ display->ref_count = 0; ++ ++ display->hw_config = *pdata->displays[i]; ++ display->type = pdata->displays[i]->type; ++ display->name = pdata->displays[i]->name; ++ ++ display->get_resolution = default_get_resolution; ++ display->get_recommended_bpp = default_get_recommended_bpp; ++ display->configure_overlay = default_configure_overlay; ++ display->wait_vsync = default_wait_vsync; ++ ++ switch (display->type) { ++ case OMAP_DISPLAY_TYPE_DPI: ++ dpi_init_display(display); ++ break; ++#ifdef CONFIG_OMAP2_DSS_RFBI ++ case OMAP_DISPLAY_TYPE_DBI: ++ rfbi_init_display(display); ++ break; ++#endif ++#ifdef CONFIG_OMAP2_DSS_VENC ++ case OMAP_DISPLAY_TYPE_VENC: ++ venc_init_display(display); ++ break; ++#endif ++#ifdef CONFIG_OMAP2_DSS_SDI ++ case OMAP_DISPLAY_TYPE_SDI: ++ sdi_init_display(display); ++ break; ++#endif ++#ifdef CONFIG_OMAP2_DSS_DSI ++ case OMAP_DISPLAY_TYPE_DSI: ++ dsi_init_display(display); ++ break; ++#endif ++ default: ++ BUG(); ++ } ++ ++ r = kobject_init_and_add(&display->kobj, &display_ktype, ++ &pdev->dev.kobj, "display%d", num_displays); ++ ++ if (r) { ++ DSSERR("failed to create sysfs file\n"); ++ continue; ++ } ++ ++ num_displays++; ++ ++ list_add_tail(&display->list, &display_list); ++ } ++} ++ ++void dss_uninit_displays(struct platform_device *pdev) ++{ ++ struct omap_display *display; ++ ++ while (!list_empty(&display_list)) { ++ display = list_first_entry(&display_list, ++ struct omap_display, list); ++ list_del(&display->list); ++ kobject_del(&display->kobj); ++ kobject_put(&display->kobj); ++ kfree(display); ++ } ++ ++ num_displays = 0; ++} ++ ++int dss_suspend_all_displays(void) ++{ ++ int r; ++ struct omap_display *display; ++ ++ list_for_each_entry(display, &display_list, list) { ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) { ++ display->activate_after_resume = 0; ++ continue; ++ } ++ ++ if (!display->suspend) { ++ DSSERR("display '%s' doesn't implement suspend\n", ++ display->name); ++ r = -ENOSYS; ++ goto err; ++ } ++ ++ r = display->suspend(display); ++ ++ if (r) ++ goto err; ++ ++ display->activate_after_resume = 1; ++ } ++ ++ return 0; ++err: ++ /* resume all displays that were suspended */ ++ dss_resume_all_displays(); ++ return r; ++} ++ ++int dss_resume_all_displays(void) ++{ ++ int r; ++ struct omap_display *display; ++ ++ list_for_each_entry(display, &display_list, list) { ++ if (display->activate_after_resume && display->resume) { ++ r = display->resume(display); ++ if (r) ++ return r; ++ } ++ ++ display->activate_after_resume = 0; ++ } ++ ++ return 0; ++} ++ ++int omap_dss_get_num_displays(void) ++{ ++ return num_displays; ++} ++EXPORT_SYMBOL(omap_dss_get_num_displays); ++ ++struct omap_display *dss_get_display(int no) ++{ ++ int i = 0; ++ struct omap_display *display; ++ ++ list_for_each_entry(display, &display_list, list) { ++ if (i++ == no) ++ return display; ++ } ++ ++ return NULL; ++} ++ ++struct omap_display *omap_dss_get_display(int no) ++{ ++ struct omap_display *display; ++ ++ display = dss_get_display(no); ++ ++ if (!display) ++ return NULL; ++ ++ switch (display->type) { ++ case OMAP_DISPLAY_TYPE_VENC: ++ break; ++ ++ case OMAP_DISPLAY_TYPE_DPI: ++ case OMAP_DISPLAY_TYPE_SDI: ++ if (display->panel == NULL) ++ return NULL; ++ break; ++ ++ case OMAP_DISPLAY_TYPE_DBI: ++ case OMAP_DISPLAY_TYPE_DSI: ++ if (display->panel == NULL || display->ctrl == NULL) ++ return NULL; ++ break; ++ ++ default: ++ return NULL; ++ } ++ ++ if (display->ctrl) { ++ if (!try_module_get(display->ctrl->owner)) ++ goto err0; ++ ++ if (display->ctrl->init) ++ if (display->ctrl->init(display) != 0) ++ goto err1; ++ } ++ ++ if (display->panel) { ++ if (!try_module_get(display->panel->owner)) ++ goto err2; ++ ++ if (display->panel->init) ++ if (display->panel->init(display) != 0) ++ goto err3; ++ } ++ ++ display->ref_count++; ++ /* ++ if (atomic_cmpxchg(&display->ref_count, 0, 1) != 0) ++ return 0; ++*/ ++ ++ return display; ++err3: ++ if (display->panel) ++ module_put(display->panel->owner); ++err2: ++ if (display->ctrl && display->ctrl->cleanup) ++ display->ctrl->cleanup(display); ++err1: ++ if (display->ctrl) ++ module_put(display->ctrl->owner); ++err0: ++ return NULL; ++} ++EXPORT_SYMBOL(omap_dss_get_display); ++ ++void omap_dss_put_display(struct omap_display *display) ++{ ++ if (--display->ref_count > 0) ++ return; ++/* ++ if (atomic_cmpxchg(&display->ref_count, 1, 0) != 1) ++ return; ++*/ ++ if (display->ctrl) { ++ if (display->ctrl->cleanup) ++ display->ctrl->cleanup(display); ++ module_put(display->ctrl->owner); ++ } ++ ++ if (display->panel) { ++ if (display->panel->cleanup) ++ display->panel->cleanup(display); ++ module_put(display->panel->owner); ++ } ++} ++EXPORT_SYMBOL(omap_dss_put_display); ++ ++void omap_dss_register_ctrl(struct omap_ctrl *ctrl) ++{ ++ struct omap_display *display; ++ ++ list_for_each_entry(display, &display_list, list) { ++ if (display->hw_config.ctrl_name && ++ strcmp(display->hw_config.ctrl_name, ctrl->name) == 0) { ++ display->ctrl = ctrl; ++ DSSDBG("ctrl '%s' registered\n", ctrl->name); ++ } ++ } ++} ++EXPORT_SYMBOL(omap_dss_register_ctrl); ++ ++void omap_dss_register_panel(struct omap_panel *panel) ++{ ++ struct omap_display *display; ++ ++ list_for_each_entry(display, &display_list, list) { ++ if (display->hw_config.panel_name && ++ strcmp(display->hw_config.panel_name, panel->name) == 0) { ++ display->panel = panel; ++ DSSDBG("panel '%s' registered\n", panel->name); ++ } ++ } ++} ++EXPORT_SYMBOL(omap_dss_register_panel); ++ ++void omap_dss_unregister_ctrl(struct omap_ctrl *ctrl) ++{ ++ struct omap_display *display; ++ ++ list_for_each_entry(display, &display_list, list) { ++ if (display->hw_config.ctrl_name && ++ strcmp(display->hw_config.ctrl_name, ctrl->name) == 0) ++ display->ctrl = NULL; ++ } ++} ++EXPORT_SYMBOL(omap_dss_unregister_ctrl); ++ ++void omap_dss_unregister_panel(struct omap_panel *panel) ++{ ++ struct omap_display *display; ++ ++ list_for_each_entry(display, &display_list, list) { ++ if (display->hw_config.panel_name && ++ strcmp(display->hw_config.panel_name, panel->name) == 0) ++ display->panel = NULL; ++ } ++} ++EXPORT_SYMBOL(omap_dss_unregister_panel); +diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c +new file mode 100644 +index 0000000..71fffca +--- /dev/null ++++ b/drivers/video/omap2/dss/dpi.c +@@ -0,0 +1,393 @@ ++/* ++ * linux/drivers/video/omap2/dss/dpi.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include "dss.h" ++ ++static struct { ++ int update_enabled; ++} dpi; ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++static int dpi_set_dsi_clk(bool is_tft, unsigned long pck_req, ++ unsigned long *fck, int *lck_div, int *pck_div) ++{ ++ struct dsi_clock_info cinfo; ++ int r; ++ ++ r = dsi_pll_calc_pck(is_tft, pck_req, &cinfo); ++ if (r) ++ return r; ++ ++ r = dsi_pll_program(&cinfo); ++ if (r) ++ return r; ++ ++ dss_select_clk_source(0, 1); ++ ++ dispc_set_lcd_divisor(cinfo.lck_div, cinfo.pck_div); ++ ++ *fck = cinfo.dsi1_pll_fclk; ++ *lck_div = cinfo.lck_div; ++ *pck_div = cinfo.pck_div; ++ ++ return 0; ++} ++#else ++static int dpi_set_dispc_clk(bool is_tft, unsigned long pck_req, ++ unsigned long *fck, int *lck_div, int *pck_div) ++{ ++ struct dispc_clock_info cinfo; ++ int r; ++ ++ r = dispc_calc_clock_div(is_tft, pck_req, &cinfo); ++ if (r) ++ return r; ++ ++ r = dispc_set_clock_div(&cinfo); ++ if (r) ++ return r; ++ ++ *fck = cinfo.fck; ++ *lck_div = cinfo.lck_div; ++ *pck_div = cinfo.pck_div; ++ ++ return 0; ++} ++#endif ++ ++static int dpi_set_mode(struct omap_display *display) ++{ ++ struct omap_panel *panel = display->panel; ++ int lck_div, pck_div; ++ unsigned long fck; ++ unsigned long pck; ++ bool is_tft; ++ int r = 0; ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ dispc_set_pol_freq(panel); ++ ++ is_tft = (display->panel->config & OMAP_DSS_LCD_TFT) != 0; ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ r = dpi_set_dsi_clk(is_tft, panel->timings.pixel_clock * 1000, ++ &fck, &lck_div, &pck_div); ++#else ++ r = dpi_set_dispc_clk(is_tft, panel->timings.pixel_clock * 1000, ++ &fck, &lck_div, &pck_div); ++#endif ++ if (r) ++ goto err0; ++ ++ pck = fck / lck_div / pck_div / 1000; ++ ++ if (pck != panel->timings.pixel_clock) { ++ DSSWARN("Could not find exact pixel clock. " ++ "Requested %d kHz, got %lu kHz\n", ++ panel->timings.pixel_clock, pck); ++ ++ panel->timings.pixel_clock = pck; ++ } ++ ++ dispc_set_lcd_timings(&panel->timings); ++ ++err0: ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ return r; ++} ++ ++static int dpi_basic_init(struct omap_display *display) ++{ ++ bool is_tft; ++ ++ is_tft = (display->panel->config & OMAP_DSS_LCD_TFT) != 0; ++ ++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); ++ dispc_set_lcd_display_type(is_tft ? OMAP_DSS_LCD_DISPLAY_TFT : ++ OMAP_DSS_LCD_DISPLAY_STN); ++ dispc_set_tft_data_lines(display->hw_config.u.dpi.data_lines); ++ ++ return 0; ++} ++ ++static int dpi_display_enable(struct omap_display *display) ++{ ++ struct omap_panel *panel = display->panel; ++ int r; ++ ++ if (display->state != OMAP_DSS_DISPLAY_DISABLED) { ++ DSSERR("display already enabled\n"); ++ return -EINVAL; ++ } ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ r = dpi_basic_init(display); ++ if (r) ++ goto err0; ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ dss_clk_enable(DSS_CLK_FCK2); ++ r = dsi_pll_init(0, 1); ++ if (r) ++ goto err1; ++#endif ++ r = dpi_set_mode(display); ++ if (r) ++ goto err2; ++ ++ mdelay(2); ++ ++ dispc_enable_lcd_out(1); ++ ++ r = panel->enable(display); ++ if (r) ++ goto err3; ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ return 0; ++ ++err3: ++ dispc_enable_lcd_out(0); ++err2: ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ dsi_pll_uninit(); ++err1: ++ dss_clk_disable(DSS_CLK_FCK2); ++#endif ++err0: ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ return r; ++} ++ ++static int dpi_display_resume(struct omap_display *display); ++ ++static void dpi_display_disable(struct omap_display *display) ++{ ++ if (display->state == OMAP_DSS_DISPLAY_DISABLED) ++ return; ++ ++ if (display->state == OMAP_DSS_DISPLAY_SUSPENDED) ++ dpi_display_resume(display); ++ ++ display->panel->disable(display); ++ ++ dispc_enable_lcd_out(0); ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ dss_select_clk_source(0, 0); ++ dsi_pll_uninit(); ++ dss_clk_disable(DSS_CLK_FCK2); ++#endif ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ display->state = OMAP_DSS_DISPLAY_DISABLED; ++} ++ ++static int dpi_display_suspend(struct omap_display *display) ++{ ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return -EINVAL; ++ ++ DSSDBG("dpi_display_suspend\n"); ++ ++ if (display->panel->suspend) ++ display->panel->suspend(display); ++ ++ dispc_enable_lcd_out(0); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ display->state = OMAP_DSS_DISPLAY_SUSPENDED; ++ ++ return 0; ++} ++ ++static int dpi_display_resume(struct omap_display *display) ++{ ++ if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) ++ return -EINVAL; ++ ++ DSSDBG("dpi_display_resume\n"); ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ dispc_enable_lcd_out(1); ++ ++ if (display->panel->resume) ++ display->panel->resume(display); ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ return 0; ++} ++ ++static void dpi_set_timings(struct omap_display *display, ++ struct omap_video_timings *timings) ++{ ++ DSSDBG("dpi_set_timings\n"); ++ display->panel->timings = *timings; ++ if (display->state == OMAP_DSS_DISPLAY_ACTIVE) { ++ dpi_set_mode(display); ++ dispc_go(OMAP_DSS_CHANNEL_LCD); ++ } ++} ++ ++static int dpi_check_timings(struct omap_display *display, ++ struct omap_video_timings *timings) ++{ ++ bool is_tft; ++ int r; ++ int lck_div, pck_div; ++ unsigned long fck; ++ unsigned long pck; ++ ++ if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) { ++ if (timings->hsw < 1 || timings->hsw > 64 || ++ timings->hfp < 1 || timings->hfp > 256 || ++ timings->hbp < 1 || timings->hbp > 256) { ++ return -EINVAL; ++ } ++ ++ if (timings->vsw < 1 || timings->vsw > 64 || ++ timings->vfp > 255 || timings->vbp > 255) { ++ return -EINVAL; ++ } ++ } else { ++ if (timings->hsw < 1 || timings->hsw > 256 || ++ timings->hfp < 1 || timings->hfp > 4096 || ++ timings->hbp < 1 || timings->hbp > 4096) { ++ return -EINVAL; ++ } ++ ++ if (timings->vsw < 1 || timings->vsw > 64 || ++ timings->vfp > 4095 || timings->vbp > 4095) { ++ return -EINVAL; ++ } ++ } ++ ++ if (timings->pixel_clock == 0) ++ return -EINVAL; ++ ++ is_tft = (display->panel->config & OMAP_DSS_LCD_TFT) != 0; ++ ++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL ++ { ++ struct dsi_clock_info cinfo; ++ r = dsi_pll_calc_pck(is_tft, timings->pixel_clock * 1000, ++ &cinfo); ++ ++ if (r) ++ return r; ++ ++ fck = cinfo.dsi1_pll_fclk; ++ lck_div = cinfo.lck_div; ++ pck_div = cinfo.pck_div; ++ } ++#else ++ { ++ struct dispc_clock_info cinfo; ++ r = dispc_calc_clock_div(is_tft, timings->pixel_clock * 1000, ++ &cinfo); ++ ++ if (r) ++ return r; ++ ++ fck = cinfo.fck; ++ lck_div = cinfo.lck_div; ++ pck_div = cinfo.pck_div; ++ } ++#endif ++ ++ pck = fck / lck_div / pck_div / 1000; ++ ++ timings->pixel_clock = pck; ++ ++ return 0; ++} ++ ++static void dpi_get_timings(struct omap_display *display, ++ struct omap_video_timings *timings) ++{ ++ *timings = display->panel->timings; ++} ++ ++static int dpi_display_set_update_mode(struct omap_display *display, ++ enum omap_dss_update_mode mode) ++{ ++ if (mode == OMAP_DSS_UPDATE_MANUAL) ++ return -EINVAL; ++ ++ if (mode == OMAP_DSS_UPDATE_DISABLED) { ++ dispc_enable_lcd_out(0); ++ dpi.update_enabled = 0; ++ } else { ++ dispc_enable_lcd_out(1); ++ dpi.update_enabled = 1; ++ } ++ ++ return 0; ++} ++ ++static enum omap_dss_update_mode dpi_display_get_update_mode( ++ struct omap_display *display) ++{ ++ return dpi.update_enabled ? OMAP_DSS_UPDATE_AUTO : ++ OMAP_DSS_UPDATE_DISABLED; ++} ++ ++void dpi_init_display(struct omap_display *display) ++{ ++ DSSDBG("DPI init_display\n"); ++ ++ display->enable = dpi_display_enable; ++ display->disable = dpi_display_disable; ++ display->suspend = dpi_display_suspend; ++ display->resume = dpi_display_resume; ++ display->set_timings = dpi_set_timings; ++ display->check_timings = dpi_check_timings; ++ display->get_timings = dpi_get_timings; ++ display->set_update_mode = dpi_display_set_update_mode; ++ display->get_update_mode = dpi_display_get_update_mode; ++} ++ ++int dpi_init(void) ++{ ++ return 0; ++} ++ ++void dpi_exit(void) ++{ ++} ++ +diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c +new file mode 100644 +index 0000000..4442931 +--- /dev/null ++++ b/drivers/video/omap2/dss/dsi.c +@@ -0,0 +1,3752 @@ ++/* ++ * linux/drivers/video/omap2/dss/dsi.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "DSI" ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include "dss.h" ++ ++/*#define VERBOSE_IRQ*/ ++ ++#define DSI_BASE 0x4804FC00 ++ ++struct dsi_reg { u16 idx; }; ++ ++#define DSI_REG(idx) ((const struct dsi_reg) { idx }) ++ ++#define DSI_SZ_REGS SZ_1K ++/* DSI Protocol Engine */ ++ ++#define DSI_REVISION DSI_REG(0x0000) ++#define DSI_SYSCONFIG DSI_REG(0x0010) ++#define DSI_SYSSTATUS DSI_REG(0x0014) ++#define DSI_IRQSTATUS DSI_REG(0x0018) ++#define DSI_IRQENABLE DSI_REG(0x001C) ++#define DSI_CTRL DSI_REG(0x0040) ++#define DSI_COMPLEXIO_CFG1 DSI_REG(0x0048) ++#define DSI_COMPLEXIO_IRQ_STATUS DSI_REG(0x004C) ++#define DSI_COMPLEXIO_IRQ_ENABLE DSI_REG(0x0050) ++#define DSI_CLK_CTRL DSI_REG(0x0054) ++#define DSI_TIMING1 DSI_REG(0x0058) ++#define DSI_TIMING2 DSI_REG(0x005C) ++#define DSI_VM_TIMING1 DSI_REG(0x0060) ++#define DSI_VM_TIMING2 DSI_REG(0x0064) ++#define DSI_VM_TIMING3 DSI_REG(0x0068) ++#define DSI_CLK_TIMING DSI_REG(0x006C) ++#define DSI_TX_FIFO_VC_SIZE DSI_REG(0x0070) ++#define DSI_RX_FIFO_VC_SIZE DSI_REG(0x0074) ++#define DSI_COMPLEXIO_CFG2 DSI_REG(0x0078) ++#define DSI_RX_FIFO_VC_FULLNESS DSI_REG(0x007C) ++#define DSI_VM_TIMING4 DSI_REG(0x0080) ++#define DSI_TX_FIFO_VC_EMPTINESS DSI_REG(0x0084) ++#define DSI_VM_TIMING5 DSI_REG(0x0088) ++#define DSI_VM_TIMING6 DSI_REG(0x008C) ++#define DSI_VM_TIMING7 DSI_REG(0x0090) ++#define DSI_STOPCLK_TIMING DSI_REG(0x0094) ++#define DSI_VC_CTRL(n) DSI_REG(0x0100 + (n * 0x20)) ++#define DSI_VC_TE(n) DSI_REG(0x0104 + (n * 0x20)) ++#define DSI_VC_LONG_PACKET_HEADER(n) DSI_REG(0x0108 + (n * 0x20)) ++#define DSI_VC_LONG_PACKET_PAYLOAD(n) DSI_REG(0x010C + (n * 0x20)) ++#define DSI_VC_SHORT_PACKET_HEADER(n) DSI_REG(0x0110 + (n * 0x20)) ++#define DSI_VC_IRQSTATUS(n) DSI_REG(0x0118 + (n * 0x20)) ++#define DSI_VC_IRQENABLE(n) DSI_REG(0x011C + (n * 0x20)) ++ ++/* DSIPHY_SCP */ ++ ++#define DSI_DSIPHY_CFG0 DSI_REG(0x200 + 0x0000) ++#define DSI_DSIPHY_CFG1 DSI_REG(0x200 + 0x0004) ++#define DSI_DSIPHY_CFG2 DSI_REG(0x200 + 0x0008) ++#define DSI_DSIPHY_CFG5 DSI_REG(0x200 + 0x0014) ++ ++/* DSI_PLL_CTRL_SCP */ ++ ++#define DSI_PLL_CONTROL DSI_REG(0x300 + 0x0000) ++#define DSI_PLL_STATUS DSI_REG(0x300 + 0x0004) ++#define DSI_PLL_GO DSI_REG(0x300 + 0x0008) ++#define DSI_PLL_CONFIGURATION1 DSI_REG(0x300 + 0x000C) ++#define DSI_PLL_CONFIGURATION2 DSI_REG(0x300 + 0x0010) ++ ++#define REG_GET(idx, start, end) \ ++ FLD_GET(dsi_read_reg(idx), start, end) ++ ++#define REG_FLD_MOD(idx, val, start, end) \ ++ dsi_write_reg(idx, FLD_MOD(dsi_read_reg(idx), val, start, end)) ++ ++/* Global interrupts */ ++#define DSI_IRQ_VC0 (1 << 0) ++#define DSI_IRQ_VC1 (1 << 1) ++#define DSI_IRQ_VC2 (1 << 2) ++#define DSI_IRQ_VC3 (1 << 3) ++#define DSI_IRQ_WAKEUP (1 << 4) ++#define DSI_IRQ_RESYNC (1 << 5) ++#define DSI_IRQ_PLL_LOCK (1 << 7) ++#define DSI_IRQ_PLL_UNLOCK (1 << 8) ++#define DSI_IRQ_PLL_RECALL (1 << 9) ++#define DSI_IRQ_COMPLEXIO_ERR (1 << 10) ++#define DSI_IRQ_HS_TX_TIMEOUT (1 << 14) ++#define DSI_IRQ_LP_RX_TIMEOUT (1 << 15) ++#define DSI_IRQ_TE_TRIGGER (1 << 16) ++#define DSI_IRQ_ACK_TRIGGER (1 << 17) ++#define DSI_IRQ_SYNC_LOST (1 << 18) ++#define DSI_IRQ_LDO_POWER_GOOD (1 << 19) ++#define DSI_IRQ_TA_TIMEOUT (1 << 20) ++#define DSI_IRQ_ERROR_MASK \ ++ (DSI_IRQ_HS_TX_TIMEOUT | DSI_IRQ_LP_RX_TIMEOUT | DSI_IRQ_SYNC_LOST | \ ++ DSI_IRQ_TA_TIMEOUT) ++#define DSI_IRQ_CHANNEL_MASK 0xf ++ ++/* Virtual channel interrupts */ ++#define DSI_VC_IRQ_CS (1 << 0) ++#define DSI_VC_IRQ_ECC_CORR (1 << 1) ++#define DSI_VC_IRQ_PACKET_SENT (1 << 2) ++#define DSI_VC_IRQ_FIFO_TX_OVF (1 << 3) ++#define DSI_VC_IRQ_FIFO_RX_OVF (1 << 4) ++#define DSI_VC_IRQ_BTA (1 << 5) ++#define DSI_VC_IRQ_ECC_NO_CORR (1 << 6) ++#define DSI_VC_IRQ_FIFO_TX_UDF (1 << 7) ++#define DSI_VC_IRQ_PP_BUSY_CHANGE (1 << 8) ++#define DSI_VC_IRQ_ERROR_MASK \ ++ (DSI_VC_IRQ_CS | DSI_VC_IRQ_ECC_CORR | DSI_VC_IRQ_FIFO_TX_OVF | \ ++ DSI_VC_IRQ_FIFO_RX_OVF | DSI_VC_IRQ_ECC_NO_CORR | \ ++ DSI_VC_IRQ_FIFO_TX_UDF) ++ ++/* ComplexIO interrupts */ ++#define DSI_CIO_IRQ_ERRSYNCESC1 (1 << 0) ++#define DSI_CIO_IRQ_ERRSYNCESC2 (1 << 1) ++#define DSI_CIO_IRQ_ERRSYNCESC3 (1 << 2) ++#define DSI_CIO_IRQ_ERRESC1 (1 << 5) ++#define DSI_CIO_IRQ_ERRESC2 (1 << 6) ++#define DSI_CIO_IRQ_ERRESC3 (1 << 7) ++#define DSI_CIO_IRQ_ERRCONTROL1 (1 << 10) ++#define DSI_CIO_IRQ_ERRCONTROL2 (1 << 11) ++#define DSI_CIO_IRQ_ERRCONTROL3 (1 << 12) ++#define DSI_CIO_IRQ_STATEULPS1 (1 << 15) ++#define DSI_CIO_IRQ_STATEULPS2 (1 << 16) ++#define DSI_CIO_IRQ_STATEULPS3 (1 << 17) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP0_1 (1 << 20) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP1_1 (1 << 21) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP0_2 (1 << 22) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP1_2 (1 << 23) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP0_3 (1 << 24) ++#define DSI_CIO_IRQ_ERRCONTENTIONLP1_3 (1 << 25) ++#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0 (1 << 30) ++#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1 (1 << 31) ++ ++#define DSI_DT_DCS_SHORT_WRITE_0 0x05 ++#define DSI_DT_DCS_SHORT_WRITE_1 0x15 ++#define DSI_DT_DCS_READ 0x06 ++#define DSI_DT_SET_MAX_RET_PKG_SIZE 0x37 ++#define DSI_DT_NULL_PACKET 0x09 ++#define DSI_DT_DCS_LONG_WRITE 0x39 ++ ++#define DSI_DT_RX_ACK_WITH_ERR 0x02 ++#define DSI_DT_RX_DCS_LONG_READ 0x1c ++#define DSI_DT_RX_SHORT_READ_1 0x21 ++#define DSI_DT_RX_SHORT_READ_2 0x22 ++ ++#define FINT_MAX 2100000 ++#define FINT_MIN 750000 ++#define REGN_MAX (1 << 7) ++#define REGM_MAX ((1 << 11) - 1) ++#define REGM3_MAX (1 << 4) ++#define REGM4_MAX (1 << 4) ++ ++enum fifo_size { ++ DSI_FIFO_SIZE_0 = 0, ++ DSI_FIFO_SIZE_32 = 1, ++ DSI_FIFO_SIZE_64 = 2, ++ DSI_FIFO_SIZE_96 = 3, ++ DSI_FIFO_SIZE_128 = 4, ++}; ++ ++#define DSI_CMD_FIFO_LEN 16 ++ ++struct dsi_cmd_update { ++ int bytespp; ++ u16 x; ++ u16 y; ++ u16 w; ++ u16 h; ++}; ++ ++struct dsi_cmd_mem_read { ++ void *buf; ++ size_t size; ++ u16 x; ++ u16 y; ++ u16 w; ++ u16 h; ++ size_t *ret_size; ++ struct completion *completion; ++}; ++ ++struct dsi_cmd_test { ++ int test_num; ++ int *result; ++ struct completion *completion; ++}; ++ ++enum dsi_cmd { ++ DSI_CMD_UPDATE, ++ DSI_CMD_AUTOUPDATE, ++ DSI_CMD_SYNC, ++ DSI_CMD_MEM_READ, ++ DSI_CMD_TEST, ++ DSI_CMD_SET_TE, ++ DSI_CMD_SET_UPDATE_MODE, ++ DSI_CMD_SET_ROTATE, ++ DSI_CMD_SET_MIRROR, ++}; ++ ++struct dsi_cmd_item { ++ struct omap_display *display; ++ ++ enum dsi_cmd cmd; ++ ++ union { ++ struct dsi_cmd_update r; ++ struct completion *sync; ++ struct dsi_cmd_mem_read mem_read; ++ struct dsi_cmd_test test; ++ int te; ++ enum omap_dss_update_mode update_mode; ++ int rotate; ++ int mirror; ++ } u; ++}; ++ ++static struct ++{ ++ void __iomem *base; ++ ++ unsigned long dsi1_pll_fclk; /* Hz */ ++ unsigned long dsi2_pll_fclk; /* Hz */ ++ unsigned long dsiphy; /* Hz */ ++ unsigned long ddr_clk; /* Hz */ ++ ++ struct { ++ struct omap_display *display; ++ enum fifo_size fifo_size; ++ int dest_per; /* destination peripheral 0-3 */ ++ } vc[4]; ++ ++ struct mutex lock; ++ ++ unsigned pll_locked; ++ ++ struct completion bta_completion; ++ ++ struct work_struct framedone_work; ++ struct work_struct process_work; ++ struct workqueue_struct *workqueue; ++ ++ enum omap_dss_update_mode user_update_mode; ++ enum omap_dss_update_mode target_update_mode; ++ enum omap_dss_update_mode update_mode; ++ int use_te; ++ int framedone_scheduled; /* helps to catch strange framedone bugs */ ++ ++ unsigned long cache_req_pck; ++ unsigned long cache_clk_freq; ++ struct dsi_clock_info cache_cinfo; ++ ++ struct kfifo *cmd_fifo; ++ spinlock_t cmd_lock; ++ struct completion cmd_done; ++ atomic_t cmd_fifo_full; ++ atomic_t cmd_pending; ++ ++ bool autoupdate_setup; ++ ++#ifdef DEBUG ++ ktime_t perf_setup_time; ++ ktime_t perf_start_time; ++ int perf_measure_frames; ++ ++ struct { ++ int x, y, w, h; ++ int bytespp; ++ } update_region; ++ ++#endif ++ int debug_process; ++ int debug_read; ++ int debug_write; ++} dsi; ++ ++#ifdef DEBUG ++static unsigned int dsi_perf; ++module_param_named(dsi_perf, dsi_perf, bool, 0644); ++#endif ++ ++static void dsi_process_cmd_fifo(struct work_struct *work); ++static void dsi_push_update(struct omap_display *display, ++ int x, int y, int w, int h); ++static void dsi_push_autoupdate(struct omap_display *display); ++ ++static inline void dsi_write_reg(const struct dsi_reg idx, u32 val) ++{ ++ __raw_writel(val, dsi.base + idx.idx); ++} ++ ++static inline u32 dsi_read_reg(const struct dsi_reg idx) ++{ ++ return __raw_readl(dsi.base + idx.idx); ++} ++ ++ ++void dsi_save_context(void) ++{ ++} ++ ++void dsi_restore_context(void) ++{ ++} ++ ++static inline int wait_for_bit_change(const struct dsi_reg idx, int bitnum, ++ int value) ++{ ++ int t = 100000; ++ ++ while (REG_GET(idx, bitnum, bitnum) != value) { ++ if (--t == 0) ++ return !value; ++ } ++ ++ return value; ++} ++ ++#ifdef DEBUG ++static void perf_mark_setup(void) ++{ ++ dsi.perf_setup_time = ktime_get(); ++} ++ ++static void perf_mark_start(void) ++{ ++ dsi.perf_start_time = ktime_get(); ++} ++ ++static void perf_show(const char *name) ++{ ++ ktime_t t, setup_time, trans_time; ++ u32 total_bytes; ++ u32 setup_us, trans_us, total_us; ++ const int numframes = 100; ++ static u32 s_trans_us, s_min_us = 0xffffffff, s_max_us; ++ ++ if (!dsi_perf) ++ return; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED) ++ return; ++ ++ t = ktime_get(); ++ ++ setup_time = ktime_sub(dsi.perf_start_time, dsi.perf_setup_time); ++ setup_us = (u32)ktime_to_us(setup_time); ++ if (setup_us == 0) ++ setup_us = 1; ++ ++ trans_time = ktime_sub(t, dsi.perf_start_time); ++ trans_us = (u32)ktime_to_us(trans_time); ++ if (trans_us == 0) ++ trans_us = 1; ++ ++ total_us = setup_us + trans_us; ++ ++ total_bytes = dsi.update_region.w * ++ dsi.update_region.h * ++ dsi.update_region.bytespp; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { ++ dsi.perf_measure_frames++; ++ ++ if (trans_us < s_min_us) ++ s_min_us = trans_us; ++ ++ if (trans_us > s_max_us) ++ s_max_us = trans_us; ++ ++ s_trans_us += trans_us; ++ ++ if (dsi.perf_measure_frames < numframes) ++ return; ++ ++ DSSINFO("%s update: %d frames in %u us " ++ "(min/max/avg %u/%u/%u), %u fps\n", ++ name, numframes, ++ s_trans_us, ++ s_min_us, ++ s_max_us, ++ s_trans_us / numframes, ++ 1000*1000 / (s_trans_us / numframes)); ++ ++ dsi.perf_measure_frames = 0; ++ s_trans_us = 0; ++ s_min_us = 0xffffffff; ++ s_max_us = 0; ++ } else { ++ DSSINFO("%s update %u us + %u us = %u us (%uHz), %u bytes, " ++ "%u kbytes/sec\n", ++ name, ++ setup_us, ++ trans_us, ++ total_us, ++ 1000*1000 / total_us, ++ total_bytes, ++ total_bytes * 1000 / total_us); ++ } ++} ++#else ++#define perf_mark_setup() ++#define perf_mark_start() ++#define perf_show(x) ++#endif ++ ++static void print_irq_status(u32 status) ++{ ++#ifndef VERBOSE_IRQ ++ if ((status & ~DSI_IRQ_CHANNEL_MASK) == 0) ++ return; ++#endif ++ printk(KERN_DEBUG "DSI IRQ: 0x%x: ", status); ++ ++#define PIS(x) \ ++ if (status & DSI_IRQ_##x) \ ++ printk(#x " "); ++#ifdef VERBOSE_IRQ ++ PIS(VC0); ++ PIS(VC1); ++ PIS(VC2); ++ PIS(VC3); ++#endif ++ PIS(WAKEUP); ++ PIS(RESYNC); ++ PIS(PLL_LOCK); ++ PIS(PLL_UNLOCK); ++ PIS(PLL_RECALL); ++ PIS(COMPLEXIO_ERR); ++ PIS(HS_TX_TIMEOUT); ++ PIS(LP_RX_TIMEOUT); ++ PIS(TE_TRIGGER); ++ PIS(ACK_TRIGGER); ++ PIS(SYNC_LOST); ++ PIS(LDO_POWER_GOOD); ++ PIS(TA_TIMEOUT); ++#undef PIS ++ ++ printk("\n"); ++} ++ ++static void print_irq_status_vc(int channel, u32 status) ++{ ++#ifndef VERBOSE_IRQ ++ if ((status & ~DSI_VC_IRQ_PACKET_SENT) == 0) ++ return; ++#endif ++ printk(KERN_DEBUG "DSI VC(%d) IRQ 0x%x: ", channel, status); ++ ++#define PIS(x) \ ++ if (status & DSI_VC_IRQ_##x) \ ++ printk(#x " "); ++ PIS(CS); ++ PIS(ECC_CORR); ++#ifdef VERBOSE_IRQ ++ PIS(PACKET_SENT); ++#endif ++ PIS(FIFO_TX_OVF); ++ PIS(FIFO_RX_OVF); ++ PIS(BTA); ++ PIS(ECC_NO_CORR); ++ PIS(FIFO_TX_UDF); ++ PIS(PP_BUSY_CHANGE); ++#undef PIS ++ printk("\n"); ++} ++ ++static void print_irq_status_cio(u32 status) ++{ ++ printk(KERN_DEBUG "DSI CIO IRQ 0x%x: ", status); ++ ++#define PIS(x) \ ++ if (status & DSI_CIO_IRQ_##x) \ ++ printk(#x " "); ++ PIS(ERRSYNCESC1); ++ PIS(ERRSYNCESC2); ++ PIS(ERRSYNCESC3); ++ PIS(ERRESC1); ++ PIS(ERRESC2); ++ PIS(ERRESC3); ++ PIS(ERRCONTROL1); ++ PIS(ERRCONTROL2); ++ PIS(ERRCONTROL3); ++ PIS(STATEULPS1); ++ PIS(STATEULPS2); ++ PIS(STATEULPS3); ++ PIS(ERRCONTENTIONLP0_1); ++ PIS(ERRCONTENTIONLP1_1); ++ PIS(ERRCONTENTIONLP0_2); ++ PIS(ERRCONTENTIONLP1_2); ++ PIS(ERRCONTENTIONLP0_3); ++ PIS(ERRCONTENTIONLP1_3); ++ PIS(ULPSACTIVENOT_ALL0); ++ PIS(ULPSACTIVENOT_ALL1); ++#undef PIS ++ ++ printk("\n"); ++} ++ ++static int debug_irq; ++ ++/* called from dss */ ++void dsi_irq_handler(void) ++{ ++ u32 irqstatus, vcstatus, ciostatus; ++ int i; ++ ++ irqstatus = dsi_read_reg(DSI_IRQSTATUS); ++ ++ if (irqstatus & DSI_IRQ_ERROR_MASK) { ++ DSSERR("DSI error, irqstatus %x\n", irqstatus); ++ print_irq_status(irqstatus); ++ } else if (debug_irq) { ++ print_irq_status(irqstatus); ++ } ++ ++ for (i = 0; i < 4; ++i) { ++ if ((irqstatus & (1< 30*1000*1000) ++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 21, 21); /* LP_RX_SYNCHRO_ENABLE */ ++ ++ return 0; ++} ++ ++ ++enum dsi_pll_power_state { ++ DSI_PLL_POWER_OFF = 0x0, ++ DSI_PLL_POWER_ON_HSCLK = 0x1, ++ DSI_PLL_POWER_ON_ALL = 0x2, ++ DSI_PLL_POWER_ON_DIV = 0x3, ++}; ++ ++static int dsi_pll_power(enum dsi_pll_power_state state) ++{ ++ int t = 0; ++ ++ REG_FLD_MOD(DSI_CLK_CTRL, state, 31, 30); /* PLL_PWR_CMD */ ++ ++ /* PLL_PWR_STATUS */ ++ while (FLD_GET(dsi_read_reg(DSI_CLK_CTRL), 29, 28) != state) { ++ udelay(1); ++ if (t++ > 1000) { ++ DSSERR("Failed to set DSI PLL power mode to %d\n", ++ state); ++ return -ENODEV; ++ } ++ } ++ ++ return 0; ++} ++ ++int dsi_pll_calc_pck(bool is_tft, unsigned long req_pck, ++ struct dsi_clock_info *cinfo) ++{ ++ struct dsi_clock_info cur, best; ++ int min_fck_per_pck; ++ int match = 0; ++ ++ if (req_pck == dsi.cache_req_pck && ++ dsi.cache_cinfo.clkin == dss_clk_get_rate(DSS_CLK_FCK2)) { ++ DSSDBG("DSI clock info found from cache\n"); ++ *cinfo = dsi.cache_cinfo; ++ return 0; ++ } ++ ++ min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK; ++ ++ if (min_fck_per_pck && ++ req_pck * min_fck_per_pck > DISPC_MAX_FCK) { ++ DSSERR("Requested pixel clock not possible with the current " ++ "OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning " ++ "the constraint off.\n"); ++ min_fck_per_pck = 0; ++ } ++ ++ DSSDBG("dsi_pll_calc\n"); ++ ++retry: ++ memset(&best, 0, sizeof(best)); ++ ++ memset(&cur, 0, sizeof(cur)); ++ cur.clkin = dss_clk_get_rate(DSS_CLK_FCK2); ++ cur.use_dss2_fck = 1; ++ cur.highfreq = 0; ++ ++ /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */ ++ /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */ ++ /* To reduce PLL lock time, keep Fint high (around 2 MHz) */ ++ for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) { ++ if (cur.highfreq == 0) ++ cur.fint = cur.clkin / cur.regn; ++ else ++ cur.fint = cur.clkin / (2 * cur.regn); ++ ++ if (cur.fint > FINT_MAX || cur.fint < FINT_MIN) ++ continue; ++ ++ /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */ ++ for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) { ++ unsigned long a, b; ++ ++ a = 2 * cur.regm * (cur.clkin/1000); ++ b = cur.regn * (cur.highfreq + 1); ++ cur.dsiphy = a / b * 1000; ++ ++ if (cur.dsiphy > 1800 * 1000 * 1000) ++ break; ++ ++ /* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3 < 173MHz */ ++ for (cur.regm3 = 1; cur.regm3 < REGM3_MAX; ++ ++cur.regm3) { ++ cur.dsi1_pll_fclk = cur.dsiphy / cur.regm3; ++ ++ /* this will narrow down the search a bit, ++ * but still give pixclocks below what was ++ * requested */ ++ if (cur.dsi1_pll_fclk < req_pck) ++ break; ++ ++ if (cur.dsi1_pll_fclk > DISPC_MAX_FCK) ++ continue; ++ ++ if (min_fck_per_pck && ++ cur.dsi1_pll_fclk < ++ req_pck * min_fck_per_pck) ++ continue; ++ ++ match = 1; ++ ++ find_lck_pck_divs(is_tft, req_pck, ++ cur.dsi1_pll_fclk, ++ &cur.lck_div, ++ &cur.pck_div); ++ ++ cur.lck = cur.dsi1_pll_fclk / cur.lck_div; ++ cur.pck = cur.lck / cur.pck_div; ++ ++ if (abs(cur.pck - req_pck) < ++ abs(best.pck - req_pck)) { ++ best = cur; ++ ++ if (cur.pck == req_pck) ++ goto found; ++ } ++ } ++ } ++ } ++found: ++ if (!match) { ++ if (min_fck_per_pck) { ++ DSSERR("Could not find suitable clock settings.\n" ++ "Turning FCK/PCK constraint off and" ++ "trying again.\n"); ++ min_fck_per_pck = 0; ++ goto retry; ++ } ++ ++ DSSERR("Could not find suitable clock settings.\n"); ++ ++ return -EINVAL; ++ } ++ ++ /* DSI2_PLL_FCLK (regm4) is not used. Set it to something sane. */ ++ best.regm4 = best.dsiphy / 48000000; ++ if (best.regm4 > REGM4_MAX) ++ best.regm4 = REGM4_MAX; ++ else if (best.regm4 == 0) ++ best.regm4 = 1; ++ best.dsi2_pll_fclk = best.dsiphy / best.regm4; ++ ++ if (cinfo) ++ *cinfo = best; ++ ++ dsi.cache_req_pck = req_pck; ++ dsi.cache_clk_freq = 0; ++ dsi.cache_cinfo = best; ++ ++ return 0; ++} ++ ++static int dsi_pll_calc_ddrfreq(unsigned long clk_freq, ++ struct dsi_clock_info *cinfo) ++{ ++ struct dsi_clock_info cur, best; ++ const bool use_dss2_fck = 1; ++ unsigned long datafreq; ++ ++ DSSDBG("dsi_pll_calc_ddrfreq\n"); ++ ++ if (clk_freq == dsi.cache_clk_freq && ++ dsi.cache_cinfo.clkin == dss_clk_get_rate(DSS_CLK_FCK2)) { ++ DSSDBG("DSI clock info found from cache\n"); ++ *cinfo = dsi.cache_cinfo; ++ return 0; ++ } ++ ++ datafreq = clk_freq * 4; ++ ++ memset(&best, 0, sizeof(best)); ++ ++ memset(&cur, 0, sizeof(cur)); ++ cur.use_dss2_fck = use_dss2_fck; ++ if (use_dss2_fck) { ++ cur.clkin = dss_clk_get_rate(DSS_CLK_FCK2); ++ cur.highfreq = 0; ++ } else { ++ cur.clkin = dispc_pclk_rate(); ++ if (cur.clkin < 32000000) ++ cur.highfreq = 0; ++ else ++ cur.highfreq = 1; ++ } ++ ++ /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */ ++ /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */ ++ /* To reduce PLL lock time, keep Fint high (around 2 MHz) */ ++ for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) { ++ if (cur.highfreq == 0) ++ cur.fint = cur.clkin / cur.regn; ++ else ++ cur.fint = cur.clkin / (2 * cur.regn); ++ ++ if (cur.fint > FINT_MAX || cur.fint < FINT_MIN) ++ continue; ++ ++ /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */ ++ for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) { ++ unsigned long a, b; ++ ++ a = 2 * cur.regm * (cur.clkin/1000); ++ b = cur.regn * (cur.highfreq + 1); ++ cur.dsiphy = a / b * 1000; ++ ++ if (cur.dsiphy > 1800 * 1000 * 1000) ++ break; ++ ++ if (abs(cur.dsiphy - datafreq) < ++ abs(best.dsiphy - datafreq)) { ++ best = cur; ++ /* DSSDBG("best %ld\n", best.dsiphy); */ ++ } ++ ++ if (cur.dsiphy == datafreq) ++ goto found; ++ } ++ } ++found: ++ /* DSI1_PLL_FCLK (regm3) is not used. Set it to something sane. */ ++ best.regm3 = best.dsiphy / 48000000; ++ if (best.regm3 > REGM3_MAX) ++ best.regm3 = REGM3_MAX; ++ else if (best.regm3 == 0) ++ best.regm3 = 1; ++ best.dsi1_pll_fclk = best.dsiphy / best.regm3; ++ ++ /* DSI2_PLL_FCLK (regm4) is not used. Set it to something sane. */ ++ best.regm4 = best.dsiphy / 48000000; ++ if (best.regm4 > REGM4_MAX) ++ best.regm4 = REGM4_MAX; ++ else if (best.regm4 == 0) ++ best.regm4 = 1; ++ best.dsi2_pll_fclk = best.dsiphy / best.regm4; ++ ++ if (cinfo) ++ *cinfo = best; ++ ++ dsi.cache_clk_freq = clk_freq; ++ dsi.cache_req_pck = 0; ++ dsi.cache_cinfo = best; ++ ++ return 0; ++} ++ ++int dsi_pll_program(struct dsi_clock_info *cinfo) ++{ ++ int r = 0; ++ u32 l; ++ ++ DSSDBG("dsi_pll_program\n"); ++ ++ dsi.dsiphy = cinfo->dsiphy; ++ dsi.ddr_clk = dsi.dsiphy / 4; ++ dsi.dsi1_pll_fclk = cinfo->dsi1_pll_fclk; ++ dsi.dsi2_pll_fclk = cinfo->dsi2_pll_fclk; ++ ++ DSSDBG("DSI Fint %ld\n", cinfo->fint); ++ ++ DSSDBG("clkin (%s) rate %ld, highfreq %d\n", ++ cinfo->use_dss2_fck ? "dss2_fck" : "pclkfree", ++ cinfo->clkin, ++ cinfo->highfreq); ++ ++ /* DSIPHY == CLKIN4DDR */ ++ DSSDBG("DSIPHY = 2 * %d / %d * %lu / %d = %lu\n", ++ cinfo->regm, ++ cinfo->regn, ++ cinfo->clkin, ++ cinfo->highfreq + 1, ++ cinfo->dsiphy); ++ ++ DSSDBG("Data rate on 1 DSI lane %ld Mbps\n", ++ dsi.dsiphy / 1000 / 1000 / 2); ++ ++ DSSDBG("Clock lane freq %ld Hz\n", dsi.ddr_clk); ++ ++ DSSDBG("regm3 = %d, dsi1_pll_fclk = %lu\n", ++ cinfo->regm3, cinfo->dsi1_pll_fclk); ++ DSSDBG("regm4 = %d, dsi2_pll_fclk = %lu\n", ++ cinfo->regm4, cinfo->dsi2_pll_fclk); ++ ++ REG_FLD_MOD(DSI_PLL_CONTROL, 0, 0, 0); /* DSI_PLL_AUTOMODE = manual */ ++ ++ l = dsi_read_reg(DSI_PLL_CONFIGURATION1); ++ l = FLD_MOD(l, 1, 0, 0); /* DSI_PLL_STOPMODE */ ++ l = FLD_MOD(l, cinfo->regn - 1, 7, 1); /* DSI_PLL_REGN */ ++ l = FLD_MOD(l, cinfo->regm, 18, 8); /* DSI_PLL_REGM */ ++ l = FLD_MOD(l, cinfo->regm3 - 1, 22, 19); /* DSI_CLOCK_DIV */ ++ l = FLD_MOD(l, cinfo->regm4 - 1, 26, 23); /* DSIPROTO_CLOCK_DIV */ ++ dsi_write_reg(DSI_PLL_CONFIGURATION1, l); ++ ++ l = dsi_read_reg(DSI_PLL_CONFIGURATION2); ++ l = FLD_MOD(l, 7, 4, 1); /* DSI_PLL_FREQSEL */ ++ /* DSI_PLL_CLKSEL */ ++ l = FLD_MOD(l, cinfo->use_dss2_fck ? 0 : 1, 11, 11); ++ l = FLD_MOD(l, cinfo->highfreq, 12, 12); /* DSI_PLL_HIGHFREQ */ ++ l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ ++ l = FLD_MOD(l, 0, 14, 14); /* DSIPHY_CLKINEN */ ++ l = FLD_MOD(l, 1, 20, 20); /* DSI_HSDIVBYPASS */ ++ dsi_write_reg(DSI_PLL_CONFIGURATION2, l); ++ ++ REG_FLD_MOD(DSI_PLL_GO, 1, 0, 0); /* DSI_PLL_GO */ ++ ++ if (wait_for_bit_change(DSI_PLL_GO, 0, 0) != 0) { ++ DSSERR("dsi pll go bit not going down.\n"); ++ r = -EIO; ++ goto err; ++ } ++ ++ if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) { ++ DSSERR("cannot lock PLL\n"); ++ r = -EIO; ++ goto err; ++ } ++ ++ dsi.pll_locked = 1; ++ ++ l = dsi_read_reg(DSI_PLL_CONFIGURATION2); ++ l = FLD_MOD(l, 0, 0, 0); /* DSI_PLL_IDLE */ ++ l = FLD_MOD(l, 0, 5, 5); /* DSI_PLL_PLLLPMODE */ ++ l = FLD_MOD(l, 0, 6, 6); /* DSI_PLL_LOWCURRSTBY */ ++ l = FLD_MOD(l, 0, 7, 7); /* DSI_PLL_TIGHTPHASELOCK */ ++ l = FLD_MOD(l, 0, 8, 8); /* DSI_PLL_DRIFTGUARDEN */ ++ l = FLD_MOD(l, 0, 10, 9); /* DSI_PLL_LOCKSEL */ ++ l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ ++ l = FLD_MOD(l, 1, 14, 14); /* DSIPHY_CLKINEN */ ++ l = FLD_MOD(l, 0, 15, 15); /* DSI_BYPASSEN */ ++ l = FLD_MOD(l, 1, 16, 16); /* DSS_CLOCK_EN */ ++ l = FLD_MOD(l, 0, 17, 17); /* DSS_CLOCK_PWDN */ ++ l = FLD_MOD(l, 1, 18, 18); /* DSI_PROTO_CLOCK_EN */ ++ l = FLD_MOD(l, 0, 19, 19); /* DSI_PROTO_CLOCK_PWDN */ ++ l = FLD_MOD(l, 0, 20, 20); /* DSI_HSDIVBYPASS */ ++ dsi_write_reg(DSI_PLL_CONFIGURATION2, l); ++ ++ DSSDBG("PLL config done\n"); ++err: ++ return r; ++} ++ ++int dsi_pll_init(bool enable_hsclk, bool enable_hsdiv) ++{ ++ int r = 0; ++ enum dsi_pll_power_state pwstate; ++ struct dispc_clock_info cinfo; ++ ++ DSSDBG("PLL init\n"); ++ ++ enable_clocks(1); ++ dsi_enable_pll_clock(1); ++ ++ /* configure dispc fck and pixel clock to something sane */ ++ r = dispc_calc_clock_div(1, 48 * 1000 * 1000, &cinfo); ++ if (r) ++ goto err0; ++ ++ r = dispc_set_clock_div(&cinfo); ++ if (r) { ++ DSSERR("Failed to set basic clocks\n"); ++ goto err0; ++ } ++ ++ r = dss_dsi_power_up(); ++ if (r) ++ goto err0; ++ ++ /* PLL does not come out of reset without this... */ ++ dispc_pck_free_enable(1); ++ ++ if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) { ++ DSSERR("PLL not coming out of reset.\n"); ++ r = -ENODEV; ++ goto err1; ++ } ++ ++ /* ... but if left on, we get problems when planes do not ++ * fill the whole display. No idea about this XXX */ ++ dispc_pck_free_enable(0); ++ ++ if (enable_hsclk && enable_hsdiv) ++ pwstate = DSI_PLL_POWER_ON_ALL; ++ else if (enable_hsclk) ++ pwstate = DSI_PLL_POWER_ON_HSCLK; ++ else if (enable_hsdiv) ++ pwstate = DSI_PLL_POWER_ON_DIV; ++ else ++ pwstate = DSI_PLL_POWER_OFF; ++ ++ r = dsi_pll_power(pwstate); ++ ++ if (r) ++ goto err1; ++ ++ DSSDBG("PLL init done\n"); ++ ++ return 0; ++err1: ++ dss_dsi_power_down(); ++err0: ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++ return r; ++} ++ ++void dsi_pll_uninit(void) ++{ ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++ ++ dsi.pll_locked = 0; ++ dsi_pll_power(DSI_PLL_POWER_OFF); ++ dss_dsi_power_down(); ++ DSSDBG("PLL uninit done\n"); ++} ++ ++unsigned long dsi_get_dsi1_pll_rate(void) ++{ ++ return dsi.dsi1_pll_fclk; ++} ++ ++unsigned long dsi_get_dsi2_pll_rate(void) ++{ ++ return dsi.dsi2_pll_fclk; ++} ++ ++void dsi_dump_clocks(struct seq_file *s) ++{ ++ int clksel; ++ ++ enable_clocks(1); ++ ++ clksel = REG_GET(DSI_PLL_CONFIGURATION2, 11, 11); ++ ++ seq_printf(s, "- dsi -\n"); ++ ++ seq_printf(s, "dsi fclk source = %s\n", ++ dss_get_dsi_clk_source() == 0 ? ++ "dss1_alwon_fclk" : "dsi2_pll_fclk"); ++ ++ seq_printf(s, "dsi pll source = %s\n", ++ clksel == 0 ? ++ "dss2_alwon_fclk" : "pclkfree"); ++ ++ seq_printf(s, "DSIPHY\t\t%lu\nDDR_CLK\t\t%lu\n", ++ dsi.dsiphy, dsi.ddr_clk); ++ ++ seq_printf(s, "dsi1_pll_fck\t%lu (%s)\n" ++ "dsi2_pll_fck\t%lu (%s)\n", ++ dsi.dsi1_pll_fclk, ++ dss_get_dispc_clk_source() == 0 ? "off" : "on", ++ dsi.dsi2_pll_fclk, ++ dss_get_dsi_clk_source() == 0 ? "off" : "on"); ++ ++ enable_clocks(0); ++} ++ ++void dsi_dump_regs(struct seq_file *s) ++{ ++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dsi_read_reg(r)) ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ DUMPREG(DSI_REVISION); ++ DUMPREG(DSI_SYSCONFIG); ++ DUMPREG(DSI_SYSSTATUS); ++ DUMPREG(DSI_IRQSTATUS); ++ DUMPREG(DSI_IRQENABLE); ++ DUMPREG(DSI_CTRL); ++ DUMPREG(DSI_COMPLEXIO_CFG1); ++ DUMPREG(DSI_COMPLEXIO_IRQ_STATUS); ++ DUMPREG(DSI_COMPLEXIO_IRQ_ENABLE); ++ DUMPREG(DSI_CLK_CTRL); ++ DUMPREG(DSI_TIMING1); ++ DUMPREG(DSI_TIMING2); ++ DUMPREG(DSI_VM_TIMING1); ++ DUMPREG(DSI_VM_TIMING2); ++ DUMPREG(DSI_VM_TIMING3); ++ DUMPREG(DSI_CLK_TIMING); ++ DUMPREG(DSI_TX_FIFO_VC_SIZE); ++ DUMPREG(DSI_RX_FIFO_VC_SIZE); ++ DUMPREG(DSI_COMPLEXIO_CFG2); ++ DUMPREG(DSI_RX_FIFO_VC_FULLNESS); ++ DUMPREG(DSI_VM_TIMING4); ++ DUMPREG(DSI_TX_FIFO_VC_EMPTINESS); ++ DUMPREG(DSI_VM_TIMING5); ++ DUMPREG(DSI_VM_TIMING6); ++ DUMPREG(DSI_VM_TIMING7); ++ DUMPREG(DSI_STOPCLK_TIMING); ++ ++ DUMPREG(DSI_VC_CTRL(0)); ++ DUMPREG(DSI_VC_TE(0)); ++ DUMPREG(DSI_VC_LONG_PACKET_HEADER(0)); ++ DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(0)); ++ DUMPREG(DSI_VC_SHORT_PACKET_HEADER(0)); ++ DUMPREG(DSI_VC_IRQSTATUS(0)); ++ DUMPREG(DSI_VC_IRQENABLE(0)); ++ ++ DUMPREG(DSI_VC_CTRL(1)); ++ DUMPREG(DSI_VC_TE(1)); ++ DUMPREG(DSI_VC_LONG_PACKET_HEADER(1)); ++ DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(1)); ++ DUMPREG(DSI_VC_SHORT_PACKET_HEADER(1)); ++ DUMPREG(DSI_VC_IRQSTATUS(1)); ++ DUMPREG(DSI_VC_IRQENABLE(1)); ++ ++ DUMPREG(DSI_VC_CTRL(2)); ++ DUMPREG(DSI_VC_TE(2)); ++ DUMPREG(DSI_VC_LONG_PACKET_HEADER(2)); ++ DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(2)); ++ DUMPREG(DSI_VC_SHORT_PACKET_HEADER(2)); ++ DUMPREG(DSI_VC_IRQSTATUS(2)); ++ DUMPREG(DSI_VC_IRQENABLE(2)); ++ ++ DUMPREG(DSI_VC_CTRL(3)); ++ DUMPREG(DSI_VC_TE(3)); ++ DUMPREG(DSI_VC_LONG_PACKET_HEADER(3)); ++ DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(3)); ++ DUMPREG(DSI_VC_SHORT_PACKET_HEADER(3)); ++ DUMPREG(DSI_VC_IRQSTATUS(3)); ++ DUMPREG(DSI_VC_IRQENABLE(3)); ++ ++ DUMPREG(DSI_DSIPHY_CFG0); ++ DUMPREG(DSI_DSIPHY_CFG1); ++ DUMPREG(DSI_DSIPHY_CFG2); ++ DUMPREG(DSI_DSIPHY_CFG5); ++ ++ DUMPREG(DSI_PLL_CONTROL); ++ DUMPREG(DSI_PLL_STATUS); ++ DUMPREG(DSI_PLL_GO); ++ DUMPREG(DSI_PLL_CONFIGURATION1); ++ DUMPREG(DSI_PLL_CONFIGURATION2); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++#undef DUMPREG ++} ++ ++enum dsi_complexio_power_state { ++ DSI_COMPLEXIO_POWER_OFF = 0x0, ++ DSI_COMPLEXIO_POWER_ON = 0x1, ++ DSI_COMPLEXIO_POWER_ULPS = 0x2, ++}; ++ ++static int dsi_complexio_power(enum dsi_complexio_power_state state) ++{ ++ int t = 0; ++ ++ /* PWR_CMD */ ++ REG_FLD_MOD(DSI_COMPLEXIO_CFG1, state, 28, 27); ++ ++ /* PWR_STATUS */ ++ while (FLD_GET(dsi_read_reg(DSI_COMPLEXIO_CFG1), 26, 25) != state) { ++ udelay(1); ++ if (t++ > 1000) { ++ DSSERR("failed to set complexio power state to " ++ "%d\n", state); ++ return -ENODEV; ++ } ++ } ++ ++ return 0; ++} ++ ++static void dsi_complexio_config(struct omap_display *display) ++{ ++ u32 r; ++ ++ int clk_lane = display->hw_config.u.dsi.clk_lane; ++ int data1_lane = display->hw_config.u.dsi.data1_lane; ++ int data2_lane = display->hw_config.u.dsi.data2_lane; ++ int clk_pol = display->hw_config.u.dsi.clk_pol; ++ int data1_pol = display->hw_config.u.dsi.data1_pol; ++ int data2_pol = display->hw_config.u.dsi.data2_pol; ++ ++ r = dsi_read_reg(DSI_COMPLEXIO_CFG1); ++ r = FLD_MOD(r, clk_lane, 2, 0); ++ r = FLD_MOD(r, clk_pol, 3, 3); ++ r = FLD_MOD(r, data1_lane, 6, 4); ++ r = FLD_MOD(r, data1_pol, 7, 7); ++ r = FLD_MOD(r, data2_lane, 10, 8); ++ r = FLD_MOD(r, data2_pol, 11, 11); ++ dsi_write_reg(DSI_COMPLEXIO_CFG1, r); ++ ++ /* The configuration of the DSI complex I/O (number of data lanes, ++ position, differential order) should not be changed while ++ DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. In order for ++ the hardware to take into account a new configuration of the complex ++ I/O (done in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to ++ follow this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, ++ then reset the DSS.DSI_CTRL[0] IF_EN to 0, then set ++ DSS.DSI_CLK_CTRL[20] LP_CLK_ENABLE to 1 and finally set again the ++ DSS.DSI_CTRL[0] IF_EN bit to 1. If the sequence is not followed, the ++ DSI complex I/O configuration is unknown. */ ++ ++ /* ++ REG_FLD_MOD(DSI_CTRL, 1, 0, 0); ++ REG_FLD_MOD(DSI_CTRL, 0, 0, 0); ++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); ++ REG_FLD_MOD(DSI_CTRL, 1, 0, 0); ++ */ ++} ++ ++static inline unsigned ns2ddr(unsigned ns) ++{ ++ /* convert time in ns to ddr ticks, rounding up */ ++ return (ns * (dsi.ddr_clk/1000/1000) + 999) / 1000; ++} ++ ++static inline unsigned ddr2ns(unsigned ddr) ++{ ++ return ddr * 1000 * 1000 / (dsi.ddr_clk / 1000); ++} ++ ++static void dsi_complexio_timings(void) ++{ ++ u32 r; ++ u32 ths_prepare, ths_prepare_ths_zero, ths_trail, ths_exit; ++ u32 tlpx_half, tclk_trail, tclk_zero; ++ u32 tclk_prepare; ++ ++ /* calculate timings */ ++ ++ /* 1 * DDR_CLK = 2 * UI */ ++ ++ /* min 40ns + 4*UI max 85ns + 6*UI */ ++ ths_prepare = ns2ddr(59) + 2; ++ ++ /* min 145ns + 10*UI */ ++ ths_prepare_ths_zero = ns2ddr(145) + 5; ++ ++ /* min max(8*UI, 60ns+4*UI) */ ++ ths_trail = max((unsigned)4, ns2ddr(60) + 2); ++ ++ /* min 100ns */ ++ ths_exit = ns2ddr(100); ++ ++ /* tlpx min 50n */ ++ tlpx_half = ns2ddr(25); ++ ++ /* min 60ns */ ++ tclk_trail = ns2ddr(60); ++ ++ /* min 38ns, max 95ns */ ++ tclk_prepare = ns2ddr(38); ++ ++ /* min tclk-prepare + tclk-zero = 300ns */ ++ tclk_zero = ns2ddr(300 - 38); ++ ++ DSSDBG("ths_prepare %u (%uns), ths_prepare_ths_zero %u (%uns)\n", ++ ths_prepare, ddr2ns(ths_prepare), ++ ths_prepare_ths_zero, ddr2ns(ths_prepare_ths_zero)); ++ DSSDBG("ths_trail %u (%uns), ths_exit %u (%uns)\n", ++ ths_trail, ddr2ns(ths_trail), ++ ths_exit, ddr2ns(ths_exit)); ++ ++ DSSDBG("tlpx_half %u (%uns), tclk_trail %u (%uns), " ++ "tclk_zero %u (%uns)\n", ++ tlpx_half, ddr2ns(tlpx_half), ++ tclk_trail, ddr2ns(tclk_trail), ++ tclk_zero, ddr2ns(tclk_zero)); ++ DSSDBG("tclk_prepare %u (%uns)\n", ++ tclk_prepare, ddr2ns(tclk_prepare)); ++ ++ /* program timings */ ++ ++ r = dsi_read_reg(DSI_DSIPHY_CFG0); ++ r = FLD_MOD(r, ths_prepare, 31, 24); ++ r = FLD_MOD(r, ths_prepare_ths_zero, 23, 16); ++ r = FLD_MOD(r, ths_trail, 15, 8); ++ r = FLD_MOD(r, ths_exit, 7, 0); ++ dsi_write_reg(DSI_DSIPHY_CFG0, r); ++ ++ r = dsi_read_reg(DSI_DSIPHY_CFG1); ++ r = FLD_MOD(r, tlpx_half, 22, 16); ++ r = FLD_MOD(r, tclk_trail, 15, 8); ++ r = FLD_MOD(r, tclk_zero, 7, 0); ++ dsi_write_reg(DSI_DSIPHY_CFG1, r); ++ ++ r = dsi_read_reg(DSI_DSIPHY_CFG2); ++ r = FLD_MOD(r, tclk_prepare, 7, 0); ++ dsi_write_reg(DSI_DSIPHY_CFG2, r); ++} ++ ++ ++static int dsi_complexio_init(struct omap_display *display) ++{ ++ int r = 0; ++ ++ DSSDBG("dsi_complexio_init\n"); ++ ++ /* CIO_CLK_ICG, enable L3 clk to CIO */ ++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 14, 14); ++ ++ /* A dummy read using the SCP interface to any DSIPHY register is ++ * required after DSIPHY reset to complete the reset of the DSI complex ++ * I/O. */ ++ dsi_read_reg(DSI_DSIPHY_CFG5); ++ ++ if (wait_for_bit_change(DSI_DSIPHY_CFG5, 30, 1) != 1) { ++ DSSERR("ComplexIO PHY not coming out of reset.\n"); ++ r = -ENODEV; ++ goto err; ++ } ++ ++ dsi_complexio_config(display); ++ ++ r = dsi_complexio_power(DSI_COMPLEXIO_POWER_ON); ++ ++ if (r) ++ goto err; ++ ++ if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 29, 1) != 1) { ++ DSSERR("ComplexIO not coming out of reset.\n"); ++ r = -ENODEV; ++ goto err; ++ } ++ ++ if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 21, 1) != 1) { ++ DSSERR("ComplexIO LDO power down.\n"); ++ r = -ENODEV; ++ goto err; ++ } ++ ++ dsi_complexio_timings(); ++ ++ /* ++ The configuration of the DSI complex I/O (number of data lanes, ++ position, differential order) should not be changed while ++ DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. For the ++ hardware to recognize a new configuration of the complex I/O (done ++ in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to follow ++ this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, next ++ reset the DSS.DSI_CTRL[0] IF_EN to 0, then set DSS.DSI_CLK_CTRL[20] ++ LP_CLK_ENABLE to 1, and finally, set again the DSS.DSI_CTRL[0] IF_EN ++ bit to 1. If the sequence is not followed, the DSi complex I/O ++ configuration is undetermined. ++ */ ++ dsi_if_enable(1); ++ dsi_if_enable(0); ++ REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); /* LP_CLK_ENABLE */ ++ dsi_if_enable(1); ++ dsi_if_enable(0); ++ ++ DSSDBG("CIO init done\n"); ++err: ++ return r; ++} ++ ++static void dsi_complexio_uninit(void) ++{ ++ dsi_complexio_power(DSI_COMPLEXIO_POWER_OFF); ++} ++ ++static int _dsi_wait_reset(void) ++{ ++ int i = 0; ++ ++ while (REG_GET(DSI_SYSSTATUS, 0, 0) == 0) { ++ if (i++ > 5) { ++ DSSERR("soft reset failed\n"); ++ return -ENODEV; ++ } ++ udelay(1); ++ } ++ ++ return 0; ++} ++ ++static int _dsi_reset(void) ++{ ++ /* Soft reset */ ++ REG_FLD_MOD(DSI_SYSCONFIG, 1, 1, 1); ++ return _dsi_wait_reset(); ++} ++ ++ ++static void dsi_config_tx_fifo(enum fifo_size size1, enum fifo_size size2, ++ enum fifo_size size3, enum fifo_size size4) ++{ ++ u32 r = 0; ++ int add = 0; ++ int i; ++ ++ dsi.vc[0].fifo_size = size1; ++ dsi.vc[1].fifo_size = size2; ++ dsi.vc[2].fifo_size = size3; ++ dsi.vc[3].fifo_size = size4; ++ ++ for (i = 0; i < 4; i++) { ++ u8 v; ++ int size = dsi.vc[i].fifo_size; ++ ++ if (add + size > 4) { ++ DSSERR("Illegal FIFO configuration\n"); ++ BUG(); ++ } ++ ++ v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); ++ r |= v << (8 * i); ++ /*DSSDBG("TX FIFO vc %d: size %d, add %d\n", i, size, add); */ ++ add += size; ++ } ++ ++ dsi_write_reg(DSI_TX_FIFO_VC_SIZE, r); ++} ++ ++static void dsi_config_rx_fifo(enum fifo_size size1, enum fifo_size size2, ++ enum fifo_size size3, enum fifo_size size4) ++{ ++ u32 r = 0; ++ int add = 0; ++ int i; ++ ++ dsi.vc[0].fifo_size = size1; ++ dsi.vc[1].fifo_size = size2; ++ dsi.vc[2].fifo_size = size3; ++ dsi.vc[3].fifo_size = size4; ++ ++ for (i = 0; i < 4; i++) { ++ u8 v; ++ int size = dsi.vc[i].fifo_size; ++ ++ if (add + size > 4) { ++ DSSERR("Illegal FIFO configuration\n"); ++ BUG(); ++ } ++ ++ v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); ++ r |= v << (8 * i); ++ /*DSSDBG("RX FIFO vc %d: size %d, add %d\n", i, size, add); */ ++ add += size; ++ } ++ ++ dsi_write_reg(DSI_RX_FIFO_VC_SIZE, r); ++} ++ ++static int dsi_force_tx_stop_mode_io(void) ++{ ++ u32 r; ++ ++ r = dsi_read_reg(DSI_TIMING1); ++ r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ ++ dsi_write_reg(DSI_TIMING1, r); ++ ++ if (wait_for_bit_change(DSI_TIMING1, 15, 0) != 0) { ++ DSSERR("TX_STOP bit not going down\n"); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static void dsi_vc_print_status(int channel) ++{ ++ u32 r; ++ ++ r = dsi_read_reg(DSI_VC_CTRL(channel)); ++ DSSDBG("vc %d: TX_FIFO_NOT_EMPTY %d, BTA_EN %d, VC_BUSY %d, " ++ "TX_FIFO_FULL %d, RX_FIFO_NOT_EMPTY %d, ", ++ channel, ++ FLD_GET(r, 5, 5), ++ FLD_GET(r, 6, 6), ++ FLD_GET(r, 15, 15), ++ FLD_GET(r, 16, 16), ++ FLD_GET(r, 20, 20)); ++ ++ r = dsi_read_reg(DSI_TX_FIFO_VC_EMPTINESS); ++ DSSDBG("EMPTINESS %d\n", (r >> (8 * channel)) & 0xff); ++} ++ ++static void dsi_vc_config(int channel) ++{ ++ u32 r; ++ ++ DSSDBG("dsi_vc_config %d\n", channel); ++ ++ r = dsi_read_reg(DSI_VC_CTRL(channel)); ++ ++ r = FLD_MOD(r, 0, 1, 1); /* SOURCE, 0 = L4 */ ++ r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */ ++ r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */ ++ r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */ ++ r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */ ++ r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */ ++ r = FLD_MOD(r, 0, 9, 9); /* MODE_SPEED, high speed on/off */ ++ ++ r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */ ++ r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */ ++ ++ dsi_write_reg(DSI_VC_CTRL(channel), r); ++} ++ ++static void dsi_vc_config_vp(int channel) ++{ ++ u32 r; ++ ++ DSSDBG("dsi_vc_config_vp\n"); ++ ++ r = dsi_read_reg(DSI_VC_CTRL(channel)); ++ ++ r = FLD_MOD(r, 1, 1, 1); /* SOURCE, 1 = video port */ ++ r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */ ++ r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */ ++ r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */ ++ r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */ ++ r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */ ++ r = FLD_MOD(r, 1, 9, 9); /* MODE_SPEED, high speed on/off */ ++ ++ r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */ ++ r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */ ++ ++ dsi_write_reg(DSI_VC_CTRL(channel), r); ++} ++ ++ ++static int dsi_vc_enable(int channel, bool enable) ++{ ++ DSSDBG("dsi_vc_enable channel %d, enable %d\n", channel, enable); ++ ++ enable = enable ? 1 : 0; ++ ++ REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 0, 0); ++ ++ if (wait_for_bit_change(DSI_VC_CTRL(channel), 0, enable) != enable) { ++ DSSERR("Failed to set dsi_vc_enable to %d\n", enable); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static void dsi_vc_enable_hs(int channel, bool enable) ++{ ++ DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable); ++ ++ dsi_vc_enable(channel, 0); ++ dsi_if_enable(0); ++ ++ REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 9, 9); ++ ++ dsi_vc_enable(channel, 1); ++ dsi_if_enable(1); ++ ++ dsi_force_tx_stop_mode_io(); ++} ++ ++static void dsi_vc_flush_long_data(int channel) ++{ ++ while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { ++ u32 val; ++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); ++ DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 %#02x\n", ++ (val >> 0) & 0xff, ++ (val >> 8) & 0xff, ++ (val >> 16) & 0xff, ++ (val >> 24) & 0xff); ++ } ++} ++ ++static void dsi_show_rx_ack_with_err(u16 err) ++{ ++ DSSERR("\tACK with ERROR (%#x):\n", err); ++ if (err & (1 << 0)) ++ DSSERR("\t\tSoT Error\n"); ++ if (err & (1 << 1)) ++ DSSERR("\t\tSoT Sync Error\n"); ++ if (err & (1 << 2)) ++ DSSERR("\t\tEoT Sync Error\n"); ++ if (err & (1 << 3)) ++ DSSERR("\t\tEscape Mode Entry Command Error\n"); ++ if (err & (1 << 4)) ++ DSSERR("\t\tLP Transmit Sync Error\n"); ++ if (err & (1 << 5)) ++ DSSERR("\t\tHS Receive Timeout Error\n"); ++ if (err & (1 << 6)) ++ DSSERR("\t\tFalse Control Error\n"); ++ if (err & (1 << 7)) ++ DSSERR("\t\t(reserved7)\n"); ++ if (err & (1 << 8)) ++ DSSERR("\t\tECC Error, single-bit (corrected)\n"); ++ if (err & (1 << 9)) ++ DSSERR("\t\tECC Error, multi-bit (not corrected)\n"); ++ if (err & (1 << 10)) ++ DSSERR("\t\tChecksum Error\n"); ++ if (err & (1 << 11)) ++ DSSERR("\t\tData type not recognized\n"); ++ if (err & (1 << 12)) ++ DSSERR("\t\tInvalid VC ID\n"); ++ if (err & (1 << 13)) ++ DSSERR("\t\tInvalid Transmission Length\n"); ++ if (err & (1 << 14)) ++ DSSERR("\t\t(reserved14)\n"); ++ if (err & (1 << 15)) ++ DSSERR("\t\tDSI Protocol Violation\n"); ++} ++ ++static u16 dsi_vc_flush_receive_data(int channel) ++{ ++ /* RX_FIFO_NOT_EMPTY */ ++ while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { ++ u32 val; ++ u8 dt; ++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); ++ DSSDBG("\trawval %#08x\n", val); ++ dt = FLD_GET(val, 5, 0); ++ if (dt == DSI_DT_RX_ACK_WITH_ERR) { ++ u16 err = FLD_GET(val, 23, 8); ++ dsi_show_rx_ack_with_err(err); ++ } else if (dt == DSI_DT_RX_SHORT_READ_1) { ++ DSSDBG("\tDCS short response, 1 byte: %#x\n", ++ FLD_GET(val, 23, 8)); ++ } else if (dt == DSI_DT_RX_SHORT_READ_2) { ++ DSSDBG("\tDCS short response, 2 byte: %#x\n", ++ FLD_GET(val, 23, 8)); ++ } else if (dt == DSI_DT_RX_DCS_LONG_READ) { ++ DSSDBG("\tDCS long response, len %d\n", ++ FLD_GET(val, 23, 8)); ++ dsi_vc_flush_long_data(channel); ++ } else { ++ DSSERR("\tunknown datatype 0x%02x\n", dt); ++ } ++ } ++ return 0; ++} ++ ++static int dsi_vc_send_bta(int channel) ++{ ++ unsigned long tmo; ++ ++ /*DSSDBG("dsi_vc_send_bta_sync %d\n", channel); */ ++ ++ if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { /* RX_FIFO_NOT_EMPTY */ ++ DSSERR("rx fifo not empty when sending BTA, dumping data:\n"); ++ dsi_vc_flush_receive_data(channel); ++ } ++ ++ REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 6, 6); /* BTA_EN */ ++ ++ tmo = jiffies + msecs_to_jiffies(10); ++ while (REG_GET(DSI_VC_CTRL(channel), 6, 6) == 1) { ++ if (time_after(jiffies, tmo)) { ++ DSSERR("Failed to send BTA\n"); ++ return -EIO; ++ } ++ } ++ ++ return 0; ++} ++ ++static int dsi_vc_send_bta_sync(int channel) ++{ ++ int r = 0; ++ ++ init_completion(&dsi.bta_completion); ++ ++ dsi_vc_enable_bta_irq(channel); ++ ++ r = dsi_vc_send_bta(channel); ++ if (r) ++ goto err; ++ ++ if (wait_for_completion_timeout(&dsi.bta_completion, ++ msecs_to_jiffies(500)) == 0) { ++ DSSERR("Failed to receive BTA\n"); ++ r = -EIO; ++ goto err; ++ } ++err: ++ dsi_vc_disable_bta_irq(channel); ++ ++ return r; ++} ++ ++static inline void dsi_vc_write_long_header(int channel, u8 data_type, ++ u16 len, u8 ecc) ++{ ++ u32 val; ++ u8 data_id; ++ ++ /*data_id = data_type | channel << 6; */ ++ data_id = data_type | dsi.vc[channel].dest_per << 6; ++ ++ val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) | ++ FLD_VAL(ecc, 31, 24); ++ ++ dsi_write_reg(DSI_VC_LONG_PACKET_HEADER(channel), val); ++} ++ ++static inline void dsi_vc_write_long_payload(int channel, ++ u8 b1, u8 b2, u8 b3, u8 b4) ++{ ++ u32 val; ++ ++ val = b4 << 24 | b3 << 16 | b2 << 8 | b1 << 0; ++ ++/* DSSDBG("\twriting %02x, %02x, %02x, %02x (%#010x)\n", ++ b1, b2, b3, b4, val); */ ++ ++ dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(channel), val); ++} ++ ++static int dsi_vc_send_long(int channel, u8 data_type, u8 *data, u16 len, ++ u8 ecc) ++{ ++ /*u32 val; */ ++ int i; ++ u8 *p; ++ int r = 0; ++ u8 b1, b2, b3, b4; ++ ++ if (dsi.debug_write) ++ DSSDBG("dsi_vc_send_long, %d bytes\n", len); ++ ++ /* len + header */ ++ if (dsi.vc[channel].fifo_size * 32 * 4 < len + 4) { ++ DSSERR("unable to send long packet: packet too long.\n"); ++ return -EINVAL; ++ } ++ ++ dsi_vc_write_long_header(channel, data_type, len, ecc); ++ ++ /*dsi_vc_print_status(0); */ ++ ++ p = data; ++ for (i = 0; i < len >> 2; i++) { ++ if (dsi.debug_write) ++ DSSDBG("\tsending full packet %d\n", i); ++ /*dsi_vc_print_status(0); */ ++ ++ b1 = *p++; ++ b2 = *p++; ++ b3 = *p++; ++ b4 = *p++; ++ ++ dsi_vc_write_long_payload(channel, b1, b2, b3, b4); ++ } ++ ++ i = len % 4; ++ if (i) { ++ b1 = 0; b2 = 0; b3 = 0; ++ ++ if (dsi.debug_write) ++ DSSDBG("\tsending remainder bytes %d\n", i); ++ ++ switch (i) { ++ case 3: ++ b1 = *p++; ++ b2 = *p++; ++ b3 = *p++; ++ break; ++ case 2: ++ b1 = *p++; ++ b2 = *p++; ++ break; ++ case 1: ++ b1 = *p++; ++ break; ++ } ++ ++ dsi_vc_write_long_payload(channel, b1, b2, b3, 0); ++ } ++ ++ return r; ++} ++ ++static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc) ++{ ++ u32 r; ++ u8 data_id; ++ ++ if (dsi.debug_write) ++ DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n", ++ channel, ++ data_type, data & 0xff, (data >> 8) & 0xff); ++ ++ if (FLD_GET(dsi_read_reg(DSI_VC_CTRL(channel)), 16, 16)) { ++ DSSERR("ERROR FIFO FULL, aborting transfer\n"); ++ return -EINVAL; ++ } ++ ++ data_id = data_type | channel << 6; ++ ++ r = (data_id << 0) | (data << 8) | (ecc << 24); ++ ++ dsi_write_reg(DSI_VC_SHORT_PACKET_HEADER(channel), r); ++ ++ return 0; ++} ++ ++int dsi_vc_send_null(int channel) ++{ ++ u8 nullpkg[] = {0, 0, 0, 0}; ++ return dsi_vc_send_long(0, DSI_DT_NULL_PACKET, nullpkg, 4, 0); ++} ++EXPORT_SYMBOL(dsi_vc_send_null); ++ ++int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len) ++{ ++ int r; ++ ++ BUG_ON(len == 0); ++ ++ if (len == 1) { ++ r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_0, ++ data[0], 0); ++ } else if (len == 2) { ++ r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_1, ++ data[0] | (data[1] << 8), 0); ++ } else { ++ /* 0x39 = DCS Long Write */ ++ r = dsi_vc_send_long(channel, DSI_DT_DCS_LONG_WRITE, ++ data, len, 0); ++ } ++ ++ return r; ++} ++EXPORT_SYMBOL(dsi_vc_dcs_write_nosync); ++ ++int dsi_vc_dcs_write(int channel, u8 *data, int len) ++{ ++ int r; ++ ++ r = dsi_vc_dcs_write_nosync(channel, data, len); ++ if (r) ++ return r; ++ ++ /* Some devices need time to process the msg in low power mode. ++ This also makes the write synchronous, and checks that ++ the peripheral is still alive */ ++ r = dsi_vc_send_bta_sync(channel); ++ ++ return r; ++} ++EXPORT_SYMBOL(dsi_vc_dcs_write); ++ ++int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) ++{ ++ u32 val; ++ u8 dt; ++ int r; ++ ++ if (dsi.debug_read) ++ DSSDBG("dsi_vc_dcs_read\n"); ++ ++ r = dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0); ++ if (r) ++ return r; ++ ++ r = dsi_vc_send_bta_sync(channel); ++ if (r) ++ return r; ++ ++ if (REG_GET(DSI_VC_CTRL(channel), 20, 20) == 0) { /* RX_FIFO_NOT_EMPTY */ ++ DSSERR("RX fifo empty when trying to read.\n"); ++ return -EIO; ++ } ++ ++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); ++ if (dsi.debug_read) ++ DSSDBG("\theader: %08x\n", val); ++ dt = FLD_GET(val, 5, 0); ++ if (dt == DSI_DT_RX_ACK_WITH_ERR) { ++ u16 err = FLD_GET(val, 23, 8); ++ dsi_show_rx_ack_with_err(err); ++ return -1; ++ ++ } else if (dt == DSI_DT_RX_SHORT_READ_1) { ++ u8 data = FLD_GET(val, 15, 8); ++ if (dsi.debug_read) ++ DSSDBG("\tDCS short response, 1 byte: %02x\n", data); ++ ++ if (buflen < 1) ++ return -1; ++ ++ buf[0] = data; ++ ++ return 1; ++ } else if (dt == DSI_DT_RX_SHORT_READ_2) { ++ u16 data = FLD_GET(val, 23, 8); ++ if (dsi.debug_read) ++ DSSDBG("\tDCS short response, 2 byte: %04x\n", data); ++ ++ if (buflen < 2) ++ return -1; ++ ++ buf[0] = data & 0xff; ++ buf[1] = (data >> 8) & 0xff; ++ ++ return 2; ++ } else if (dt == DSI_DT_RX_DCS_LONG_READ) { ++ int w; ++ int len = FLD_GET(val, 23, 8); ++ if (dsi.debug_read) ++ DSSDBG("\tDCS long response, len %d\n", len); ++ ++ if (len > buflen) ++ return -1; ++ ++ /* two byte checksum ends the packet, not included in len */ ++ for (w = 0; w < len + 2;) { ++ int b; ++ val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); ++ if (dsi.debug_read) ++ DSSDBG("\t\t%02x %02x %02x %02x\n", ++ (val >> 0) & 0xff, ++ (val >> 8) & 0xff, ++ (val >> 16) & 0xff, ++ (val >> 24) & 0xff); ++ ++ for (b = 0; b < 4; ++b) { ++ if (w < len) ++ buf[w] = (val >> (b * 8)) & 0xff; ++ /* we discard the 2 byte checksum */ ++ ++w; ++ } ++ } ++ ++ return len; ++ ++ } else { ++ DSSERR("\tunknown datatype 0x%02x\n", dt); ++ return -1; ++ } ++} ++EXPORT_SYMBOL(dsi_vc_dcs_read); ++ ++ ++int dsi_vc_set_max_rx_packet_size(int channel, u16 len) ++{ ++ return dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE, ++ len, 0); ++} ++EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size); ++ ++ ++static int dsi_set_lp_rx_timeout(int ns, int x4, int x16) ++{ ++ u32 r; ++ unsigned long fck; ++ int ticks; ++ ++ /* ticks in DSI_FCK */ ++ ++ fck = dsi_fclk_rate(); ++ ticks = (fck / 1000 / 1000) * ns / 1000; ++ ++ if (ticks > 0x1fff) { ++ DSSERR("LP_TX_TO too high\n"); ++ return -EINVAL; ++ } ++ ++ r = dsi_read_reg(DSI_TIMING2); ++ r = FLD_MOD(r, 1, 15, 15); /* LP_RX_TO */ ++ r = FLD_MOD(r, x16, 14, 14); /* LP_RX_TO_X16 */ ++ r = FLD_MOD(r, x4, 13, 13); /* LP_RX_TO_X4 */ ++ r = FLD_MOD(r, ticks, 12, 0); /* LP_RX_COUNTER */ ++ dsi_write_reg(DSI_TIMING2, r); ++ ++ DSSDBG("LP_RX_TO %ld ns (%#x ticks)\n", ++ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / ++ (fck / 1000 / 1000), ++ ticks); ++ ++ return 0; ++} ++ ++static int dsi_set_ta_timeout(int ns, int x8, int x16) ++{ ++ u32 r; ++ unsigned long fck; ++ int ticks; ++ ++ /* ticks in DSI_FCK */ ++ ++ fck = dsi_fclk_rate(); ++ ticks = (fck / 1000 / 1000) * ns / 1000; ++ ++ if (ticks > 0x1fff) { ++ DSSERR("TA_TO too high\n"); ++ return -EINVAL; ++ } ++ ++ r = dsi_read_reg(DSI_TIMING1); ++ r = FLD_MOD(r, 1, 31, 31); /* TA_TO */ ++ r = FLD_MOD(r, x16, 30, 30); /* TA_TO_X16 */ ++ r = FLD_MOD(r, x8, 29, 29); /* TA_TO_X8 */ ++ r = FLD_MOD(r, ticks, 28, 16); /* TA_TO_COUNTER */ ++ dsi_write_reg(DSI_TIMING1, r); ++ ++ DSSDBG("TA_TO %ld ns (%#x ticks)\n", ++ (ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1) * 1000) / ++ (fck / 1000 / 1000), ++ ticks); ++ ++ return 0; ++} ++ ++static int dsi_set_stop_state_counter(int ns, int x4, int x16) ++{ ++ u32 r; ++ unsigned long fck; ++ int ticks; ++ ++ /* ticks in DSI_FCK */ ++ ++ fck = dsi_fclk_rate(); ++ ticks = (fck / 1000 / 1000) * ns / 1000; ++ ++ if (ticks > 0x1fff) { ++ DSSERR("STOP_STATE_COUNTER_IO too high\n"); ++ return -EINVAL; ++ } ++ ++ r = dsi_read_reg(DSI_TIMING1); ++ r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ ++ r = FLD_MOD(r, x16, 14, 14); /* STOP_STATE_X16_IO */ ++ r = FLD_MOD(r, x4, 13, 13); /* STOP_STATE_X4_IO */ ++ r = FLD_MOD(r, ticks, 12, 0); /* STOP_STATE_COUNTER_IO */ ++ dsi_write_reg(DSI_TIMING1, r); ++ ++ DSSDBG("STOP_STATE_COUNTER %ld ns (%#x ticks)\n", ++ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / ++ (fck / 1000 / 1000), ++ ticks); ++ ++ return 0; ++} ++ ++static int dsi_set_hs_tx_timeout(int ns, int x4, int x16) ++{ ++ u32 r; ++ unsigned long fck; ++ int ticks; ++ ++ /* ticks in TxByteClkHS */ ++ ++ fck = dsi.ddr_clk / 4; ++ ticks = (fck / 1000 / 1000) * ns / 1000; ++ ++ if (ticks > 0x1fff) { ++ DSSERR("HS_TX_TO too high\n"); ++ return -EINVAL; ++ } ++ ++ r = dsi_read_reg(DSI_TIMING2); ++ r = FLD_MOD(r, 1, 31, 31); /* HS_TX_TO */ ++ r = FLD_MOD(r, x16, 30, 30); /* HS_TX_TO_X16 */ ++ r = FLD_MOD(r, x4, 29, 29); /* HS_TX_TO_X8 (4 really) */ ++ r = FLD_MOD(r, ticks, 28, 16); /* HS_TX_TO_COUNTER */ ++ dsi_write_reg(DSI_TIMING2, r); ++ ++ DSSDBG("HS_TX_TO %ld ns (%#x ticks)\n", ++ (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / ++ (fck / 1000 / 1000), ++ ticks); ++ ++ return 0; ++} ++static int dsi_proto_config(struct omap_display *display) ++{ ++ u32 r; ++ int buswidth = 0; ++ ++ dsi_config_tx_fifo(DSI_FIFO_SIZE_128, ++ DSI_FIFO_SIZE_0, ++ DSI_FIFO_SIZE_0, ++ DSI_FIFO_SIZE_0); ++ ++ dsi_config_rx_fifo(DSI_FIFO_SIZE_128, ++ DSI_FIFO_SIZE_0, ++ DSI_FIFO_SIZE_0, ++ DSI_FIFO_SIZE_0); ++ ++ /* XXX what values for the timeouts? */ ++ dsi_set_stop_state_counter(1000, 0, 0); ++ ++ dsi_set_ta_timeout(50000, 1, 1); ++ ++ /* 3000ns * 16 */ ++ dsi_set_lp_rx_timeout(3000, 0, 1); ++ ++ /* 10000ns * 4 */ ++ dsi_set_hs_tx_timeout(10000, 1, 0); ++ ++ switch (display->ctrl->pixel_size) { ++ case 16: ++ buswidth = 0; ++ break; ++ case 18: ++ buswidth = 1; ++ break; ++ case 24: ++ buswidth = 2; ++ break; ++ default: ++ BUG(); ++ } ++ ++ r = dsi_read_reg(DSI_CTRL); ++ r = FLD_MOD(r, 1, 1, 1); /* CS_RX_EN */ ++ r = FLD_MOD(r, 1, 2, 2); /* ECC_RX_EN */ ++ r = FLD_MOD(r, 1, 3, 3); /* TX_FIFO_ARBITRATION */ ++ /* XXX what should the ratio be */ ++ r = FLD_MOD(r, 0, 4, 4); /* VP_CLK_RATIO, VP_PCLK = VP_CLK/2 */ ++ r = FLD_MOD(r, buswidth, 7, 6); /* VP_DATA_BUS_WIDTH */ ++ r = FLD_MOD(r, 0, 8, 8); /* VP_CLK_POL */ ++ r = FLD_MOD(r, 2, 13, 12); /* LINE_BUFFER, 2 lines */ ++ r = FLD_MOD(r, 1, 14, 14); /* TRIGGER_RESET_MODE */ ++ r = FLD_MOD(r, 1, 19, 19); /* EOT_ENABLE */ ++ r = FLD_MOD(r, 1, 24, 24); /* DCS_CMD_ENABLE */ ++ r = FLD_MOD(r, 0, 25, 25); /* DCS_CMD_CODE, 1=start, 0=continue */ ++ ++ dsi_write_reg(DSI_CTRL, r); ++ ++ /* we configure vc0 for L4 communication, and ++ * vc1 for dispc */ ++ dsi_vc_config(0); ++ dsi_vc_config_vp(1); ++ ++ /* set all vc targets to peripheral 0 */ ++ dsi.vc[0].dest_per = 0; ++ dsi.vc[1].dest_per = 0; ++ dsi.vc[2].dest_per = 0; ++ dsi.vc[3].dest_per = 0; ++ ++ return 0; ++} ++ ++static void dsi_proto_timings(void) ++{ ++ int tlpx_half, tclk_zero, tclk_prepare, tclk_trail; ++ int tclk_pre, tclk_post; ++ int ddr_clk_pre, ddr_clk_post; ++ u32 r; ++ ++ r = dsi_read_reg(DSI_DSIPHY_CFG1); ++ tlpx_half = FLD_GET(r, 22, 16); ++ tclk_trail = FLD_GET(r, 15, 8); ++ tclk_zero = FLD_GET(r, 7, 0); ++ ++ r = dsi_read_reg(DSI_DSIPHY_CFG2); ++ tclk_prepare = FLD_GET(r, 7, 0); ++ ++ /* min 8*UI */ ++ tclk_pre = 20; ++ /* min 60ns + 52*UI */ ++ tclk_post = ns2ddr(60) + 26; ++ ++ ddr_clk_pre = (tclk_pre + tlpx_half*2 + tclk_zero + tclk_prepare) / 4; ++ ddr_clk_post = (tclk_post + tclk_trail) / 4; ++ ++ r = dsi_read_reg(DSI_CLK_TIMING); ++ r = FLD_MOD(r, ddr_clk_pre, 15, 8); ++ r = FLD_MOD(r, ddr_clk_post, 7, 0); ++ dsi_write_reg(DSI_CLK_TIMING, r); ++ ++ DSSDBG("ddr_clk_pre %d, ddr_clk_post %d\n", ++ ddr_clk_pre, ++ ddr_clk_post); ++} ++ ++ ++#define DSI_DECL_VARS \ ++ int __dsi_cb = 0; u32 __dsi_cv = 0; ++ ++#define DSI_FLUSH(ch) \ ++ if (__dsi_cb > 0) { \ ++ /*DSSDBG("sending long packet %#010x\n", __dsi_cv);*/ \ ++ dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(ch), __dsi_cv); \ ++ __dsi_cb = __dsi_cv = 0; \ ++ } ++ ++#define DSI_PUSH(ch, data) \ ++ do { \ ++ __dsi_cv |= (data) << (__dsi_cb * 8); \ ++ /*DSSDBG("cv = %#010x, cb = %d\n", __dsi_cv, __dsi_cb);*/ \ ++ if (++__dsi_cb > 3) \ ++ DSI_FLUSH(ch); \ ++ } while (0) ++ ++static int dsi_update_screen_l4(struct omap_display *display, ++ int x, int y, int w, int h) ++{ ++ /* Note: supports only 24bit colors in 32bit container */ ++ int first = 1; ++ int fifo_stalls = 0; ++ int max_dsi_packet_size; ++ int max_data_per_packet; ++ int max_pixels_per_packet; ++ int pixels_left; ++ int bytespp = 3; ++ int scr_width; ++ u32 __iomem *data; ++ int start_offset; ++ int horiz_inc; ++ int current_x; ++ struct omap_overlay *ovl; ++ ++ debug_irq = 0; ++ ++ DSSDBG("dsi_update_screen_l4 (%d,%d %dx%d)\n", ++ x, y, w, h); ++ ++ ovl = display->manager->overlays[0]; ++ ++ if (ovl->info.color_mode != OMAP_DSS_COLOR_RGB24U) ++ return -EINVAL; ++ ++ if (display->ctrl->pixel_size != 24) ++ return -EINVAL; ++ ++ scr_width = ovl->info.screen_width; ++ data = ovl->info.vaddr; ++ ++ start_offset = scr_width * y + x; ++ horiz_inc = scr_width - w; ++ current_x = x; ++ ++ /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) bytes ++ * in fifo */ ++ ++ /* When using CPU, max long packet size is TX buffer size */ ++ max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4; ++ ++ /* we seem to get better perf if we divide the tx fifo to half, ++ and while the other half is being sent, we fill the other half ++ max_dsi_packet_size /= 2; */ ++ ++ max_data_per_packet = max_dsi_packet_size - 4 - 1; ++ ++ max_pixels_per_packet = max_data_per_packet / bytespp; ++ ++ DSSDBG("max_pixels_per_packet %d\n", max_pixels_per_packet); ++ ++ display->ctrl->setup_update(display, x, y, w, h); ++ ++ pixels_left = w * h; ++ ++ DSSDBG("total pixels %d\n", pixels_left); ++ ++ data += start_offset; ++ ++#ifdef DEBUG ++ dsi.update_region.x = x; ++ dsi.update_region.y = y; ++ dsi.update_region.w = w; ++ dsi.update_region.h = h; ++ dsi.update_region.bytespp = bytespp; ++#endif ++ ++ perf_mark_start(); ++ ++ while (pixels_left > 0) { ++ /* 0x2c = write_memory_start */ ++ /* 0x3c = write_memory_continue */ ++ u8 dcs_cmd = first ? 0x2c : 0x3c; ++ int pixels; ++ DSI_DECL_VARS; ++ first = 0; ++ ++#if 1 ++ /* using fifo not empty */ ++ /* TX_FIFO_NOT_EMPTY */ ++ while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) { ++ udelay(1); ++ fifo_stalls++; ++ if (fifo_stalls > 0xfffff) { ++ DSSERR("fifo stalls overflow, pixels left %d\n", ++ pixels_left); ++ dsi_if_enable(0); ++ return -EIO; ++ } ++ } ++#elif 1 ++ /* using fifo emptiness */ ++ while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 < ++ max_dsi_packet_size) { ++ fifo_stalls++; ++ if (fifo_stalls > 0xfffff) { ++ DSSERR("fifo stalls overflow, pixels left %d\n", ++ pixels_left); ++ dsi_if_enable(0); ++ return -EIO; ++ } ++ } ++#else ++ while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 == 0) { ++ fifo_stalls++; ++ if (fifo_stalls > 0xfffff) { ++ DSSERR("fifo stalls overflow, pixels left %d\n", ++ pixels_left); ++ dsi_if_enable(0); ++ return -EIO; ++ } ++ } ++#endif ++ pixels = min(max_pixels_per_packet, pixels_left); ++ ++ pixels_left -= pixels; ++ ++ dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE, ++ 1 + pixels * bytespp, 0); ++ ++ DSI_PUSH(0, dcs_cmd); ++ ++ while (pixels-- > 0) { ++ u32 pix = __raw_readl(data++); ++ ++ DSI_PUSH(0, (pix >> 16) & 0xff); ++ DSI_PUSH(0, (pix >> 8) & 0xff); ++ DSI_PUSH(0, (pix >> 0) & 0xff); ++ ++ current_x++; ++ if (current_x == x+w) { ++ current_x = x; ++ data += horiz_inc; ++ } ++ } ++ ++ DSI_FLUSH(0); ++ } ++ ++ perf_show("L4"); ++ ++ return 0; ++} ++ ++#if 0 ++static void dsi_clear_screen_l4(struct omap_display *display, ++ int x, int y, int w, int h) ++{ ++ int first = 1; ++ int fifo_stalls = 0; ++ int max_dsi_packet_size; ++ int max_data_per_packet; ++ int max_pixels_per_packet; ++ int pixels_left; ++ int bytespp = 3; ++ int pixnum; ++ ++ debug_irq = 0; ++ ++ DSSDBG("dsi_clear_screen_l4 (%d,%d %dx%d)\n", ++ x, y, w, h); ++ ++ if (display->ctrl->bpp != 24) ++ return -EINVAL; ++ ++ /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) ++ * bytes in fifo */ ++ ++ /* When using CPU, max long packet size is TX buffer size */ ++ max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4; ++ ++ max_data_per_packet = max_dsi_packet_size - 4 - 1; ++ ++ max_pixels_per_packet = max_data_per_packet / bytespp; ++ ++ enable_clocks(1); ++ ++ display->ctrl->setup_update(display, x, y, w, h); ++ ++ pixels_left = w * h; ++ ++ dsi.update_region.x = x; ++ dsi.update_region.y = y; ++ dsi.update_region.w = w; ++ dsi.update_region.h = h; ++ dsi.update_region.bytespp = bytespp; ++ ++ start_measuring(); ++ ++ pixnum = 0; ++ ++ while (pixels_left > 0) { ++ /* 0x2c = write_memory_start */ ++ /* 0x3c = write_memory_continue */ ++ u8 dcs_cmd = first ? 0x2c : 0x3c; ++ int pixels; ++ DSI_DECL_VARS; ++ first = 0; ++ ++ /* TX_FIFO_NOT_EMPTY */ ++ while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) { ++ fifo_stalls++; ++ if (fifo_stalls > 0xfffff) { ++ DSSERR("fifo stalls overflow\n"); ++ dsi_if_enable(0); ++ enable_clocks(0); ++ return; ++ } ++ } ++ ++ pixels = min(max_pixels_per_packet, pixels_left); ++ ++ pixels_left -= pixels; ++ ++ dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE, ++ 1 + pixels * bytespp, 0); ++ ++ DSI_PUSH(0, dcs_cmd); ++ ++ while (pixels-- > 0) { ++ u32 pix; ++ ++ pix = 0x000000; ++ ++ DSI_PUSH(0, (pix >> 16) & 0xff); ++ DSI_PUSH(0, (pix >> 8) & 0xff); ++ DSI_PUSH(0, (pix >> 0) & 0xff); ++ } ++ ++ DSI_FLUSH(0); ++ } ++ ++ enable_clocks(0); ++ ++ end_measuring("L4 CLEAR"); ++} ++#endif ++ ++static void dsi_setup_update_dispc(struct omap_display *display, ++ u16 x, u16 y, u16 w, u16 h) ++{ ++ DSSDBG("dsi_setup_update_dispc(%d,%d %dx%d)\n", ++ x, y, w, h); ++ ++#ifdef DEBUG ++ dsi.update_region.x = x; ++ dsi.update_region.y = y; ++ dsi.update_region.w = w; ++ dsi.update_region.h = h; ++ dsi.update_region.bytespp = 3; // XXX ++#endif ++ ++ dispc_setup_partial_planes(display, &x, &y, &w, &h); ++ ++ dispc_set_lcd_size(w, h); ++} ++ ++static void dsi_setup_autoupdate_dispc(struct omap_display *display) ++{ ++ u16 w, h; ++ ++ display->get_resolution(display, &w, &h); ++ ++#ifdef DEBUG ++ dsi.update_region.x = 0; ++ dsi.update_region.y = 0; ++ dsi.update_region.w = w; ++ dsi.update_region.h = h; ++ dsi.update_region.bytespp = 3; // XXX ++#endif ++ ++ /* the overlay settings may not have been applied, if we were in manual ++ * mode earlier, so do it here */ ++ display->manager->apply(display->manager); ++ ++ dispc_set_lcd_size(w, h); ++ ++ dsi.autoupdate_setup = 0; ++} ++ ++static void dsi_update_screen_dispc(struct omap_display *display, ++ u16 x, u16 y, u16 w, u16 h) ++{ ++ int bytespp = 3; ++ int total_len; ++ int line_packet_len; ++ u32 l; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL) ++ DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n", ++ x, y, w, h); ++ ++ /* TODO: one packet could be longer, I think? Max is the line buffer */ ++ line_packet_len = w * bytespp + 1; /* 1 byte for DCS cmd */ ++ total_len = line_packet_len * h; ++ ++ display->ctrl->setup_update(display, x, y, w, h); ++ ++ if (0) ++ dsi_vc_print_status(1); ++ ++ perf_mark_start(); ++ ++ l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */ ++ dsi_write_reg(DSI_VC_TE(1), l); ++ ++ dsi_vc_write_long_header(1, DSI_DT_DCS_LONG_WRITE, line_packet_len, 0); ++ ++ if (dsi.use_te) ++ l = FLD_MOD(l, 1, 30, 30); /* TE_EN */ ++ else ++ l = FLD_MOD(l, 1, 31, 31); /* TE_START */ ++ dsi_write_reg(DSI_VC_TE(1), l); ++ ++ dispc_enable_lcd_out(1); ++ ++ if (dsi.use_te) ++ dsi_vc_send_bta(1); ++} ++ ++static void framedone_callback(void *data, u32 mask) ++{ ++ if (dsi.framedone_scheduled) { ++ DSSERR("Framedone already scheduled. Bogus FRAMEDONE IRQ?\n"); ++ return; ++ } ++ ++ dsi.framedone_scheduled = 1; ++ ++ /* We get FRAMEDONE when DISPC has finished sending pixels and turns ++ * itself off. However, DSI still has the pixels in its buffers, and ++ * is sending the data. Thus we have to wait until we can do a new ++ * transfer or turn the clocks off. We do that in a separate work ++ * func. */ ++ queue_work(dsi.workqueue, &dsi.framedone_work); ++} ++ ++static void framedone_worker(struct work_struct *work) ++{ ++ u32 l; ++ unsigned long tmo; ++ int i = 0; ++ ++ l = REG_GET(DSI_VC_TE(1), 23, 0); /* TE_SIZE */ ++ ++ /* There shouldn't be much stuff in DSI buffers, if any, so we'll ++ * just busyloop */ ++ if (l > 0) { ++ tmo = jiffies + msecs_to_jiffies(50); ++ while (REG_GET(DSI_VC_TE(1), 23, 0) > 0) { /* TE_SIZE */ ++ i++; ++ if (time_after(jiffies, tmo)) { ++ DSSERR("timeout waiting TE_SIZE to zero\n"); ++ break; ++ } ++ cpu_relax(); ++ } ++ } ++ ++ if (REG_GET(DSI_VC_TE(1), 30, 30)) ++ DSSERR("TE_EN not zero\n"); ++ ++ if (REG_GET(DSI_VC_TE(1), 31, 31)) ++ DSSERR("TE_START not zero\n"); ++ ++ perf_show("DISPC"); ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL) ++ DSSDBG("FRAMEDONE\n"); ++ ++#if 0 ++ if (l) ++ DSSWARN("FRAMEDONE irq too early, %d bytes, %d loops\n", l, i); ++#else ++ if (l > 1024*3) ++ DSSWARN("FRAMEDONE irq too early, %d bytes, %d loops\n", l, i); ++#endif ++ ++#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC ++ dispc_fake_vsync_irq(); ++#endif ++ dsi.framedone_scheduled = 0; ++ ++ /* XXX check that fifo is not full. otherwise we would sleep and never ++ * get to process_cmd_fifo below */ ++ /* We check for target_update_mode, not update_mode. No reason to push ++ * new updates if we're turning auto update off */ ++ if (dsi.target_update_mode == OMAP_DSS_UPDATE_AUTO) ++ dsi_push_autoupdate(dsi.vc[1].display); ++ ++ atomic_set(&dsi.cmd_pending, 0); ++ dsi_process_cmd_fifo(NULL); ++} ++ ++static void dsi_start_auto_update(struct omap_display *display) ++{ ++ DSSDBG("starting auto update\n"); ++ ++ dsi.autoupdate_setup = 1; ++ ++ dsi_push_autoupdate(display); ++} ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++/* FIFO functions */ ++ ++static void dsi_signal_fifo_waiters(void) ++{ ++ if (atomic_read(&dsi.cmd_fifo_full) > 0) { ++ DSSDBG("SIGNALING: Fifo not full for waiter!\n"); ++ complete(&dsi.cmd_done); ++ atomic_dec(&dsi.cmd_fifo_full); ++ } ++} ++ ++/* returns 1 for async op, and 0 for sync op */ ++static int dsi_do_update(struct omap_display *display, ++ struct dsi_cmd_update *upd) ++{ ++ int r; ++ u16 x = upd->x, y = upd->y, w = upd->w, h = upd->h; ++ u16 dw, dh; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED) ++ return 0; ++ ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return 0; ++ ++ display->get_resolution(display, &dw, &dh); ++ if (x > dw || y > dh) ++ return 0; ++ ++ if (x + w > dw) ++ w = dw - x; ++ ++ if (y + h > dh) ++ h = dh - y; ++ ++ DSSDBGF("%d,%d %dx%d", x, y, w, h); ++ ++ perf_mark_setup(); ++ ++ if (display->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { ++ dsi_setup_update_dispc(display, x, y, w, h); ++ dsi_update_screen_dispc(display, x, y, w, h); ++ return 1; ++ } else { ++ r = dsi_update_screen_l4(display, x, y, w, h); ++ if (r) ++ DSSERR("L4 update failed\n"); ++ return 0; ++ } ++} ++ ++/* returns 1 for async op, and 0 for sync op */ ++static int dsi_do_autoupdate(struct omap_display *display) ++{ ++ int r; ++ u16 w, h; ++ ++ if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED) ++ return 0; ++ ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return 0; ++ ++ display->get_resolution(display, &w, &h); ++ ++ perf_mark_setup(); ++ ++ if (display->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { ++ if (dsi.autoupdate_setup) ++ dsi_setup_autoupdate_dispc(display); ++ dsi_update_screen_dispc(display, 0, 0, w, h); ++ return 1; ++ } else { ++ r = dsi_update_screen_l4(display, 0, 0, w, h); ++ if (r) ++ DSSERR("L4 update failed\n"); ++ return 0; ++ } ++} ++ ++static void dsi_do_cmd_mem_read(struct omap_display *display, ++ struct dsi_cmd_mem_read *mem_read) ++{ ++ int r; ++ r = display->ctrl->memory_read(display, ++ mem_read->buf, ++ mem_read->size, ++ mem_read->x, ++ mem_read->y, ++ mem_read->w, ++ mem_read->h); ++ ++ *mem_read->ret_size = (size_t)r; ++ complete(mem_read->completion); ++} ++ ++static void dsi_do_cmd_test(struct omap_display *display, ++ struct dsi_cmd_test *test) ++{ ++ int r = 0; ++ ++ DSSDBGF(""); ++ ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return; ++ ++ /* run test first in low speed mode */ ++ dsi_vc_enable_hs(0, 0); ++ ++ if (display->ctrl->run_test) { ++ r = display->ctrl->run_test(display, test->test_num); ++ if (r) ++ goto end; ++ } ++ ++ if (display->panel->run_test) { ++ r = display->panel->run_test(display, test->test_num); ++ if (r) ++ goto end; ++ } ++ ++ /* then in high speed */ ++ dsi_vc_enable_hs(0, 1); ++ ++ if (display->ctrl->run_test) { ++ r = display->ctrl->run_test(display, test->test_num); ++ if (r) ++ goto end; ++ } ++ ++ if (display->panel->run_test) ++ r = display->panel->run_test(display, test->test_num); ++ ++end: ++ dsi_vc_enable_hs(0, 1); ++ ++ *test->result = r; ++ complete(test->completion); ++ ++ DSSDBG("test end\n"); ++} ++ ++static void dsi_do_cmd_set_te(struct omap_display *display, bool enable) ++{ ++ dsi.use_te = enable; ++ ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return; ++ ++ display->ctrl->enable_te(display, enable); ++ ++ if (enable) { ++ /* disable LP_RX_TO, so that we can receive TE. ++ * Time to wait for TE is longer than the timer allows */ ++ REG_FLD_MOD(DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */ ++ } else { ++ REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */ ++ } ++} ++ ++static void dsi_do_cmd_set_update_mode(struct omap_display *display, ++ enum omap_dss_update_mode mode) ++{ ++ dsi.update_mode = mode; ++ ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return; ++ ++ if (mode == OMAP_DSS_UPDATE_AUTO) ++ dsi_start_auto_update(display); ++} ++ ++static void dsi_process_cmd_fifo(struct work_struct *work) ++{ ++ int len; ++ struct dsi_cmd_item p; ++ unsigned long flags; ++ struct omap_display *display; ++ int exit = 0; ++ ++ if (dsi.debug_process) ++ DSSDBGF(""); ++ ++ if (atomic_cmpxchg(&dsi.cmd_pending, 0, 1) == 1) { ++ if (dsi.debug_process) ++ DSSDBG("cmd pending, skip process\n"); ++ return; ++ } ++ ++ while (!exit) { ++ spin_lock_irqsave(dsi.cmd_fifo->lock, flags); ++ ++ len = __kfifo_get(dsi.cmd_fifo, (unsigned char *)&p, ++ sizeof(p)); ++ if (len == 0) { ++ if (dsi.debug_process) ++ DSSDBG("nothing more in fifo, atomic clear\n"); ++ atomic_set(&dsi.cmd_pending, 0); ++ spin_unlock_irqrestore(dsi.cmd_fifo->lock, flags); ++ break; ++ } ++ ++ spin_unlock_irqrestore(dsi.cmd_fifo->lock, flags); ++ ++ BUG_ON(len != sizeof(p)); ++ ++ display = p.display; ++ ++ if (dsi.debug_process) ++ DSSDBG("processing cmd %d\n", p.cmd); ++ ++ switch (p.cmd) { ++ case DSI_CMD_UPDATE: ++ if (dsi_do_update(display, &p.u.r)) { ++ if (dsi.debug_process) ++ DSSDBG("async update\n"); ++ exit = 1; ++ } else { ++ if (dsi.debug_process) ++ DSSDBG("sync update\n"); ++ } ++ break; ++ ++ case DSI_CMD_AUTOUPDATE: ++ if (dsi_do_autoupdate(display)) { ++ if (dsi.debug_process) ++ DSSDBG("async autoupdate\n"); ++ exit = 1; ++ } else { ++ if (dsi.debug_process) ++ DSSDBG("sync autoupdate\n"); ++ } ++ break; ++ ++ case DSI_CMD_SYNC: ++ if (dsi.debug_process) ++ DSSDBG("Signaling SYNC done!\n"); ++ complete(p.u.sync); ++ break; ++ ++ case DSI_CMD_MEM_READ: ++ dsi_do_cmd_mem_read(display, &p.u.mem_read); ++ break; ++ ++ case DSI_CMD_TEST: ++ dsi_do_cmd_test(display, &p.u.test); ++ break; ++ ++ case DSI_CMD_SET_TE: ++ dsi_do_cmd_set_te(display, p.u.te); ++ break; ++ ++ case DSI_CMD_SET_UPDATE_MODE: ++ dsi_do_cmd_set_update_mode(display, p.u.update_mode); ++ break; ++ ++ case DSI_CMD_SET_ROTATE: ++ display->ctrl->set_rotate(display, p.u.rotate); ++ if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) ++ dsi.autoupdate_setup = 1; ++ break; ++ ++ case DSI_CMD_SET_MIRROR: ++ display->ctrl->set_mirror(display, p.u.mirror); ++ break; ++ ++ default: ++ BUG(); ++ } ++ } ++ ++ if (dsi.debug_process) ++ DSSDBG("exit dsi_process_cmd_fifo\n"); ++ ++ dsi_signal_fifo_waiters(); ++} ++ ++static void dsi_push_cmd(struct dsi_cmd_item *p) ++{ ++ int ret; ++ ++ if (dsi.debug_process) ++ DSSDBGF(""); ++ ++ while (1) { ++ unsigned long flags; ++ unsigned avail, used; ++ ++ spin_lock_irqsave(dsi.cmd_fifo->lock, flags); ++ used = __kfifo_len(dsi.cmd_fifo) / sizeof(struct dsi_cmd_item); ++ avail = DSI_CMD_FIFO_LEN - used; ++ ++ if (dsi.debug_process) ++ DSSDBG("%u/%u items left in fifo\n", avail, used); ++ ++ if (avail == 0) { ++ if (dsi.debug_process) ++ DSSDBG("cmd fifo full, waiting...\n"); ++ spin_unlock_irqrestore(dsi.cmd_fifo->lock, flags); ++ atomic_inc(&dsi.cmd_fifo_full); ++ wait_for_completion(&dsi.cmd_done); ++ if (dsi.debug_process) ++ DSSDBG("cmd fifo not full, woke up\n"); ++ continue; ++ } ++ ++ ret = __kfifo_put(dsi.cmd_fifo, (unsigned char *)p, ++ sizeof(*p)); ++ ++ spin_unlock_irqrestore(dsi.cmd_fifo->lock, flags); ++ ++ BUG_ON(ret != sizeof(*p)); ++ ++ break; ++ } ++ ++ queue_work(dsi.workqueue, &dsi.process_work); ++} ++ ++static void dsi_push_update(struct omap_display *display, ++ int x, int y, int w, int h) ++{ ++ struct dsi_cmd_item p; ++ ++ p.display = display; ++ p.cmd = DSI_CMD_UPDATE; ++ ++ p.u.r.x = x; ++ p.u.r.y = y; ++ p.u.r.w = w; ++ p.u.r.h = h; ++ ++ DSSDBG("pushing UPDATE %d,%d %dx%d\n", x, y, w, h); ++ ++ dsi_push_cmd(&p); ++} ++ ++static void dsi_push_autoupdate(struct omap_display *display) ++{ ++ struct dsi_cmd_item p; ++ ++ p.display = display; ++ p.cmd = DSI_CMD_AUTOUPDATE; ++ ++ dsi_push_cmd(&p); ++} ++ ++static void dsi_push_sync(struct omap_display *display, ++ struct completion *sync_comp) ++{ ++ struct dsi_cmd_item p; ++ ++ p.display = display; ++ p.cmd = DSI_CMD_SYNC; ++ p.u.sync = sync_comp; ++ ++ DSSDBG("pushing SYNC\n"); ++ ++ dsi_push_cmd(&p); ++} ++ ++static void dsi_push_mem_read(struct omap_display *display, ++ struct dsi_cmd_mem_read *mem_read) ++{ ++ struct dsi_cmd_item p; ++ ++ p.display = display; ++ p.cmd = DSI_CMD_MEM_READ; ++ p.u.mem_read = *mem_read; ++ ++ DSSDBG("pushing MEM_READ\n"); ++ ++ dsi_push_cmd(&p); ++} ++ ++static void dsi_push_test(struct omap_display *display, int test_num, ++ int *result, struct completion *completion) ++{ ++ struct dsi_cmd_item p; ++ ++ p.display = display; ++ p.cmd = DSI_CMD_TEST; ++ p.u.test.test_num = test_num; ++ p.u.test.result = result; ++ p.u.test.completion = completion; ++ ++ DSSDBG("pushing TEST\n"); ++ ++ dsi_push_cmd(&p); ++} ++ ++static void dsi_push_set_te(struct omap_display *display, bool enable) ++{ ++ struct dsi_cmd_item p; ++ ++ p.display = display; ++ p.cmd = DSI_CMD_SET_TE; ++ p.u.te = enable; ++ ++ DSSDBG("pushing SET_TE\n"); ++ ++ dsi_push_cmd(&p); ++} ++ ++static void dsi_push_set_update_mode(struct omap_display *display, ++ enum omap_dss_update_mode mode) ++{ ++ struct dsi_cmd_item p; ++ ++ p.display = display; ++ p.cmd = DSI_CMD_SET_UPDATE_MODE; ++ p.u.update_mode = mode; ++ ++ DSSDBG("pushing SET_UPDATE_MODE\n"); ++ ++ dsi_push_cmd(&p); ++} ++ ++static void dsi_push_set_rotate(struct omap_display *display, int rotate) ++{ ++ struct dsi_cmd_item p; ++ ++ p.display = display; ++ p.cmd = DSI_CMD_SET_ROTATE; ++ p.u.rotate = rotate; ++ ++ DSSDBG("pushing SET_ROTATE\n"); ++ ++ dsi_push_cmd(&p); ++} ++ ++static void dsi_push_set_mirror(struct omap_display *display, int mirror) ++{ ++ struct dsi_cmd_item p; ++ ++ p.display = display; ++ p.cmd = DSI_CMD_SET_MIRROR; ++ p.u.mirror = mirror; ++ ++ DSSDBG("pushing SET_MIRROR\n"); ++ ++ dsi_push_cmd(&p); ++} ++ ++static int dsi_wait_sync(struct omap_display *display) ++{ ++ long wait = msecs_to_jiffies(60000); ++ struct completion compl; ++ ++ DSSDBGF(""); ++ ++ init_completion(&compl); ++ dsi_push_sync(display, &compl); ++ ++ DSSDBG("Waiting for SYNC to happen...\n"); ++ wait = wait_for_completion_timeout(&compl, wait); ++ DSSDBG("Released from SYNC\n"); ++ ++ if (wait == 0) { ++ DSSERR("timeout waiting sync\n"); ++ return -ETIME; ++ } ++ ++ return 0; ++} ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++/* Display funcs */ ++ ++static int dsi_display_init_dispc(struct omap_display *display) ++{ ++ int r; ++ ++ r = omap_dispc_register_isr(framedone_callback, NULL, ++ DISPC_IRQ_FRAMEDONE); ++ if (r) { ++ DSSERR("can't get FRAMEDONE irq\n"); ++ return r; ++ } ++ ++ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); ++ ++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_DSI); ++ dispc_enable_fifohandcheck(1); ++ ++ dispc_set_tft_data_lines(display->ctrl->pixel_size); ++ ++ { ++ struct omap_video_timings timings = { ++ .hsw = 1, ++ .hfp = 1, ++ .hbp = 1, ++ .vsw = 1, ++ .vfp = 0, ++ .vbp = 0, ++ }; ++ ++ dispc_set_lcd_timings(&timings); ++ } ++ ++ return 0; ++} ++ ++static void dsi_display_uninit_dispc(struct omap_display *display) ++{ ++ omap_dispc_unregister_isr(framedone_callback, NULL, ++ DISPC_IRQ_FRAMEDONE); ++} ++ ++static int dsi_display_init_dsi(struct omap_display *display) ++{ ++ struct dsi_clock_info cinfo; ++ int r; ++ ++ _dsi_print_reset_status(); ++ ++ r = dsi_pll_init(1, 0); ++ if (r) ++ goto err0; ++ ++ r = dsi_pll_calc_ddrfreq(display->hw_config.u.dsi.ddr_clk_hz, &cinfo); ++ if (r) ++ goto err1; ++ ++ r = dsi_pll_program(&cinfo); ++ if (r) ++ goto err1; ++ ++ DSSDBG("PLL OK\n"); ++ ++ r = dsi_complexio_init(display); ++ if (r) ++ goto err1; ++ ++ _dsi_print_reset_status(); ++ ++ dsi_proto_timings(); ++ dsi_set_lp_clk_divisor(); ++ ++ if (1) ++ _dsi_print_reset_status(); ++ ++ r = dsi_proto_config(display); ++ if (r) ++ goto err2; ++ ++ /* enable interface */ ++ dsi_vc_enable(0, 1); ++ dsi_vc_enable(1, 1); ++ dsi_if_enable(1); ++ dsi_force_tx_stop_mode_io(); ++ ++ if (display->ctrl && display->ctrl->enable) { ++ r = display->ctrl->enable(display); ++ if (r) ++ goto err3; ++ } ++ ++ if (display->panel && display->panel->enable) { ++ r = display->panel->enable(display); ++ if (r) ++ goto err4; ++ } ++ ++ /* enable high-speed after initial config */ ++ dsi_vc_enable_hs(0, 1); ++ ++ return 0; ++err4: ++ if (display->ctrl && display->ctrl->disable) ++ display->ctrl->disable(display); ++err3: ++ dsi_if_enable(0); ++err2: ++ dsi_complexio_uninit(); ++err1: ++ dsi_pll_uninit(); ++err0: ++ return r; ++} ++ ++static void dsi_display_uninit_dsi(struct omap_display *display) ++{ ++ if (display->panel && display->panel->disable) ++ display->panel->disable(display); ++ if (display->ctrl && display->ctrl->disable) ++ display->ctrl->disable(display); ++ ++ dsi_complexio_uninit(); ++ dsi_pll_uninit(); ++} ++ ++static int dsi_core_init(void) ++{ ++ /* Autoidle */ ++ REG_FLD_MOD(DSI_SYSCONFIG, 1, 0, 0); ++ ++ /* ENWAKEUP */ ++ REG_FLD_MOD(DSI_SYSCONFIG, 1, 2, 2); ++ ++ /* SIDLEMODE smart-idle */ ++ REG_FLD_MOD(DSI_SYSCONFIG, 2, 4, 3); ++ ++ _dsi_initialize_irq(); ++ ++ return 0; ++} ++ ++static int dsi_display_enable(struct omap_display *display) ++{ ++ int r = 0; ++ ++ DSSDBG("dsi_display_enable\n"); ++ ++ mutex_lock(&dsi.lock); ++ ++ if (display->state != OMAP_DSS_DISPLAY_DISABLED) { ++ DSSERR("display already enabled\n"); ++ r = -EINVAL; ++ goto err0; ++ } ++ ++ enable_clocks(1); ++ dsi_enable_pll_clock(1); ++ ++ r = _dsi_reset(); ++ if (r) ++ return r; ++ ++ dsi_core_init(); ++ ++ r = dsi_display_init_dispc(display); ++ if (r) ++ goto err1; ++ ++ r = dsi_display_init_dsi(display); ++ if (r) ++ goto err2; ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ if (dsi.use_te) ++ dsi_push_set_te(display, 1); ++ ++ dsi_push_set_update_mode(display, dsi.user_update_mode); ++ dsi.target_update_mode = dsi.user_update_mode; ++ ++ mutex_unlock(&dsi.lock); ++ ++ return dsi_wait_sync(display); ++ ++err2: ++ dsi_display_uninit_dispc(display); ++err1: ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++err0: ++ mutex_unlock(&dsi.lock); ++ DSSDBG("dsi_display_enable FAILED\n"); ++ return r; ++} ++ ++static void dsi_display_disable(struct omap_display *display) ++{ ++ DSSDBG("dsi_display_disable\n"); ++ ++ mutex_lock(&dsi.lock); ++ ++ if (display->state == OMAP_DSS_DISPLAY_DISABLED || ++ display->state == OMAP_DSS_DISPLAY_SUSPENDED) ++ goto end; ++ ++ if (dsi.target_update_mode != OMAP_DSS_UPDATE_DISABLED) { ++ dsi_push_set_update_mode(display, OMAP_DSS_UPDATE_DISABLED); ++ dsi.target_update_mode = OMAP_DSS_UPDATE_DISABLED; ++ } ++ ++ dsi_wait_sync(display); ++ ++ display->state = OMAP_DSS_DISPLAY_DISABLED; ++ ++ dsi_display_uninit_dispc(display); ++ ++ dsi_display_uninit_dsi(display); ++ ++ enable_clocks(0); ++ dsi_enable_pll_clock(0); ++end: ++ mutex_unlock(&dsi.lock); ++} ++ ++static int dsi_display_suspend(struct omap_display *display) ++{ ++ DSSDBG("dsi_display_suspend\n"); ++ ++ dsi_display_disable(display); ++ ++ display->state = OMAP_DSS_DISPLAY_SUSPENDED; ++ ++ return 0; ++} ++ ++static int dsi_display_resume(struct omap_display *display) ++{ ++ DSSDBG("dsi_display_resume\n"); ++ ++ display->state = OMAP_DSS_DISPLAY_DISABLED; ++ return dsi_display_enable(display); ++} ++ ++static int dsi_display_update(struct omap_display *display, ++ u16 x, u16 y, u16 w, u16 h) ++{ ++ DSSDBG("dsi_display_update(%d,%d %dx%d)\n", x, y, w, h); ++ ++ if (w == 0 || h == 0) ++ return 0; ++ ++ mutex_lock(&dsi.lock); ++ ++ if (dsi.target_update_mode == OMAP_DSS_UPDATE_MANUAL) ++ dsi_push_update(display, x, y, w, h); ++ /* XXX else return error? */ ++ ++ mutex_unlock(&dsi.lock); ++ ++ return 0; ++} ++ ++static int dsi_display_sync(struct omap_display *display) ++{ ++ DSSDBGF(""); ++ return dsi_wait_sync(display); ++} ++ ++static int dsi_display_set_update_mode(struct omap_display *display, ++ enum omap_dss_update_mode mode) ++{ ++ DSSDBGF("%d", mode); ++ ++ mutex_lock(&dsi.lock); ++ ++ if (dsi.target_update_mode != mode) { ++ dsi_push_set_update_mode(display, mode); ++ ++ dsi.target_update_mode = mode; ++ dsi.user_update_mode = mode; ++ } ++ ++ mutex_unlock(&dsi.lock); ++ ++ return dsi_wait_sync(display); ++} ++ ++static enum omap_dss_update_mode dsi_display_get_update_mode( ++ struct omap_display *display) ++{ ++ return dsi.update_mode; ++} ++ ++static int dsi_display_enable_te(struct omap_display *display, bool enable) ++{ ++ DSSDBGF("%d", enable); ++ ++ if (!display->ctrl->enable_te) ++ return -ENOENT; ++ ++ dsi_push_set_te(display, enable); ++ ++ return dsi_wait_sync(display); ++} ++ ++static int dsi_display_get_te(struct omap_display *display) ++{ ++ return dsi.use_te; ++} ++ ++ ++ ++static int dsi_display_set_rotate(struct omap_display *display, u8 rotate) ++{ ++ DSSDBGF("%d", rotate); ++ ++ if (!display->ctrl->set_rotate || !display->ctrl->get_rotate) ++ return -EINVAL; ++ ++ dsi_push_set_rotate(display, rotate); ++ ++ return dsi_wait_sync(display); ++} ++ ++static u8 dsi_display_get_rotate(struct omap_display *display) ++{ ++ if (!display->ctrl->set_rotate || !display->ctrl->get_rotate) ++ return 0; ++ ++ return display->ctrl->get_rotate(display); ++} ++ ++static int dsi_display_set_mirror(struct omap_display *display, bool mirror) ++{ ++ DSSDBGF("%d", mirror); ++ ++ if (!display->ctrl->set_mirror || !display->ctrl->get_mirror) ++ return -EINVAL; ++ ++ dsi_push_set_mirror(display, mirror); ++ ++ return dsi_wait_sync(display); ++} ++ ++static bool dsi_display_get_mirror(struct omap_display *display) ++{ ++ if (!display->ctrl->set_mirror || !display->ctrl->get_mirror) ++ return 0; ++ ++ return display->ctrl->get_mirror(display); ++} ++ ++static int dsi_display_run_test(struct omap_display *display, int test_num) ++{ ++ long wait = msecs_to_jiffies(60000); ++ struct completion compl; ++ int result; ++ ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return -EIO; ++ ++ DSSDBGF("%d", test_num); ++ ++ init_completion(&compl); ++ ++ dsi_push_test(display, test_num, &result, &compl); ++ ++ DSSDBG("Waiting for SYNC to happen...\n"); ++ wait = wait_for_completion_timeout(&compl, wait); ++ DSSDBG("Released from SYNC\n"); ++ ++ if (wait == 0) { ++ DSSERR("timeout waiting test sync\n"); ++ return -ETIME; ++ } ++ ++ return result; ++} ++ ++static int dsi_display_memory_read(struct omap_display *display, ++ void *buf, size_t size, ++ u16 x, u16 y, u16 w, u16 h) ++{ ++ long wait = msecs_to_jiffies(60000); ++ struct completion compl; ++ struct dsi_cmd_mem_read mem_read; ++ size_t ret_size; ++ ++ DSSDBGF(""); ++ ++ if (!display->ctrl->memory_read) ++ return -EINVAL; ++ ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return -EIO; ++ ++ init_completion(&compl); ++ ++ mem_read.x = x; ++ mem_read.y = y; ++ mem_read.w = w; ++ mem_read.h = h; ++ mem_read.buf = buf; ++ mem_read.size = size; ++ mem_read.ret_size = &ret_size; ++ mem_read.completion = &compl; ++ ++ dsi_push_mem_read(display, &mem_read); ++ ++ DSSDBG("Waiting for SYNC to happen...\n"); ++ wait = wait_for_completion_timeout(&compl, wait); ++ DSSDBG("Released from SYNC\n"); ++ ++ if (wait == 0) { ++ DSSERR("timeout waiting mem read sync\n"); ++ return -ETIME; ++ } ++ ++ return ret_size; ++} ++ ++static void dsi_configure_overlay(struct omap_overlay *ovl) ++{ ++ unsigned low, high, size; ++ enum omap_burst_size burst; ++ enum omap_plane plane = ovl->id; ++ ++ burst = OMAP_DSS_BURST_16x32; ++ size = 16 * 32 / 8; ++ ++ dispc_set_burst_size(plane, burst); ++ ++ high = dispc_get_plane_fifo_size(plane) - size; ++ low = 0; ++ dispc_setup_plane_fifo(plane, low, high); ++} ++ ++void dsi_init_display(struct omap_display *display) ++{ ++ DSSDBG("DSI init\n"); ++ ++ display->enable = dsi_display_enable; ++ display->disable = dsi_display_disable; ++ display->suspend = dsi_display_suspend; ++ display->resume = dsi_display_resume; ++ display->update = dsi_display_update; ++ display->sync = dsi_display_sync; ++ display->set_update_mode = dsi_display_set_update_mode; ++ display->get_update_mode = dsi_display_get_update_mode; ++ display->enable_te = dsi_display_enable_te; ++ display->get_te = dsi_display_get_te; ++ ++ display->get_rotate = dsi_display_get_rotate; ++ display->set_rotate = dsi_display_set_rotate; ++ ++ display->get_mirror = dsi_display_get_mirror; ++ display->set_mirror = dsi_display_set_mirror; ++ ++ display->run_test = dsi_display_run_test; ++ display->memory_read = dsi_display_memory_read; ++ ++ display->configure_overlay = dsi_configure_overlay; ++ ++ display->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; ++ ++ dsi.vc[0].display = display; ++ dsi.vc[1].display = display; ++} ++ ++int dsi_init(void) ++{ ++ u32 rev; ++ ++ spin_lock_init(&dsi.cmd_lock); ++ dsi.cmd_fifo = kfifo_alloc( ++ DSI_CMD_FIFO_LEN * sizeof(struct dsi_cmd_item), ++ GFP_KERNEL, ++ &dsi.cmd_lock); ++ ++ init_completion(&dsi.cmd_done); ++ atomic_set(&dsi.cmd_fifo_full, 0); ++ atomic_set(&dsi.cmd_pending, 0); ++ ++ init_completion(&dsi.bta_completion); ++ ++ dsi.workqueue = create_singlethread_workqueue("dsi"); ++ INIT_WORK(&dsi.framedone_work, framedone_worker); ++ INIT_WORK(&dsi.process_work, dsi_process_cmd_fifo); ++ ++ mutex_init(&dsi.lock); ++ ++ dsi.target_update_mode = OMAP_DSS_UPDATE_DISABLED; ++ dsi.user_update_mode = OMAP_DSS_UPDATE_DISABLED; ++ ++ dsi.base = ioremap(DSI_BASE, DSI_SZ_REGS); ++ if (!dsi.base) { ++ DSSERR("can't ioremap DSI\n"); ++ return -ENOMEM; ++ } ++ ++ enable_clocks(1); ++ ++ rev = dsi_read_reg(DSI_REVISION); ++ printk(KERN_INFO "OMAP DSI rev %d.%d\n", ++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); ++ ++ enable_clocks(0); ++ ++ return 0; ++} ++ ++void dsi_exit(void) ++{ ++ flush_workqueue(dsi.workqueue); ++ destroy_workqueue(dsi.workqueue); ++ ++ iounmap(dsi.base); ++ ++ kfifo_free(dsi.cmd_fifo); ++ ++ DSSDBG("omap_dsi_exit\n"); ++} ++ +diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c +new file mode 100644 +index 0000000..adc1f34 +--- /dev/null ++++ b/drivers/video/omap2/dss/dss.c +@@ -0,0 +1,345 @@ ++/* ++ * linux/drivers/video/omap2/dss/dss.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "DSS" ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include "dss.h" ++ ++#define DSS_BASE 0x48050000 ++ ++#define DSS_SZ_REGS SZ_512 ++ ++struct dss_reg { ++ u16 idx; ++}; ++ ++#define DSS_REG(idx) ((const struct dss_reg) { idx }) ++ ++#define DSS_REVISION DSS_REG(0x0000) ++#define DSS_SYSCONFIG DSS_REG(0x0010) ++#define DSS_SYSSTATUS DSS_REG(0x0014) ++#define DSS_IRQSTATUS DSS_REG(0x0018) ++#define DSS_CONTROL DSS_REG(0x0040) ++#define DSS_SDI_CONTROL DSS_REG(0x0044) ++#define DSS_PLL_CONTROL DSS_REG(0x0048) ++#define DSS_SDI_STATUS DSS_REG(0x005C) ++ ++#define REG_GET(idx, start, end) \ ++ FLD_GET(dss_read_reg(idx), start, end) ++ ++#define REG_FLD_MOD(idx, val, start, end) \ ++ dss_write_reg(idx, FLD_MOD(dss_read_reg(idx), val, start, end)) ++ ++static struct { ++ void __iomem *base; ++ ++ u32 ctx[DSS_SZ_REGS / sizeof(u32)]; ++} dss; ++ ++static int _omap_dss_wait_reset(void); ++ ++static inline void dss_write_reg(const struct dss_reg idx, u32 val) ++{ ++ __raw_writel(val, dss.base + idx.idx); ++} ++ ++static inline u32 dss_read_reg(const struct dss_reg idx) ++{ ++ return __raw_readl(dss.base + idx.idx); ++} ++ ++#define SR(reg) \ ++ dss.ctx[(DSS_##reg).idx / sizeof(u32)] = dss_read_reg(DSS_##reg) ++#define RR(reg) \ ++ dss_write_reg(DSS_##reg, dss.ctx[(DSS_##reg).idx / sizeof(u32)]) ++ ++void dss_save_context(void) ++{ ++ if (cpu_is_omap24xx()) ++ return; ++ ++ SR(SYSCONFIG); ++ SR(CONTROL); ++ ++#ifdef CONFIG_OMAP2_DSS_SDI ++ SR(SDI_CONTROL); ++ SR(PLL_CONTROL); ++#endif ++} ++ ++void dss_restore_context(void) ++{ ++ if (_omap_dss_wait_reset()) ++ DSSERR("DSS not coming out of reset after sleep\n"); ++ ++ RR(SYSCONFIG); ++ RR(CONTROL); ++ ++#ifdef CONFIG_OMAP2_DSS_SDI ++ RR(SDI_CONTROL); ++ RR(PLL_CONTROL); ++#endif ++} ++ ++#undef SR ++#undef RR ++ ++void dss_sdi_init(u8 datapairs) ++{ ++ u32 l; ++ ++ BUG_ON(datapairs > 3 || datapairs < 1); ++ ++ l = dss_read_reg(DSS_SDI_CONTROL); ++ l = FLD_MOD(l, 0xf, 19, 15); /* SDI_PDIV */ ++ l = FLD_MOD(l, datapairs-1, 3, 2); /* SDI_PRSEL */ ++ l = FLD_MOD(l, 2, 1, 0); /* SDI_BWSEL */ ++ dss_write_reg(DSS_SDI_CONTROL, l); ++ ++ l = dss_read_reg(DSS_PLL_CONTROL); ++ l = FLD_MOD(l, 0x7, 25, 22); /* SDI_PLL_FREQSEL */ ++ l = FLD_MOD(l, 0xb, 16, 11); /* SDI_PLL_REGN */ ++ l = FLD_MOD(l, 0xb4, 10, 1); /* SDI_PLL_REGM */ ++ dss_write_reg(DSS_PLL_CONTROL, l); ++} ++ ++void dss_sdi_enable(void) ++{ ++ dispc_pck_free_enable(1); ++ ++ /* Reset SDI PLL */ ++ REG_FLD_MOD(DSS_PLL_CONTROL, 1, 18, 18); /* SDI_PLL_SYSRESET */ ++ udelay(1); /* wait 2x PCLK */ ++ ++ /* Lock SDI PLL */ ++ REG_FLD_MOD(DSS_PLL_CONTROL, 1, 28, 28); /* SDI_PLL_GOBIT */ ++ ++ /* Waiting for PLL lock request to complete */ ++ while (dss_read_reg(DSS_SDI_STATUS) & (1 << 6)) ++ ; ++ ++ /* Clearing PLL_GO bit */ ++ REG_FLD_MOD(DSS_PLL_CONTROL, 0, 28, 28); ++ ++ /* Waiting for PLL to lock */ ++ while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 5))) ++ ; ++ ++ dispc_lcd_enable_signal(1); ++ ++ /* Waiting for SDI reset to complete */ ++ while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 2))) ++ ; ++} ++ ++void dss_sdi_disable(void) ++{ ++ dispc_lcd_enable_signal(0); ++ ++ dispc_pck_free_enable(0); ++ ++ /* Reset SDI PLL */ ++ REG_FLD_MOD(DSS_PLL_CONTROL, 0, 18, 18); /* SDI_PLL_SYSRESET */ ++} ++ ++void dss_dump_regs(struct seq_file *s) ++{ ++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dss_read_reg(r)) ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ DUMPREG(DSS_REVISION); ++ DUMPREG(DSS_SYSCONFIG); ++ DUMPREG(DSS_SYSSTATUS); ++ DUMPREG(DSS_IRQSTATUS); ++ DUMPREG(DSS_CONTROL); ++ DUMPREG(DSS_SDI_CONTROL); ++ DUMPREG(DSS_PLL_CONTROL); ++ DUMPREG(DSS_SDI_STATUS); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++#undef DUMPREG ++} ++ ++void dss_select_clk_source(bool dsi, bool dispc) ++{ ++ u32 r; ++ r = dss_read_reg(DSS_CONTROL); ++ r = FLD_MOD(r, dsi, 1, 1); /* DSI_CLK_SWITCH */ ++ r = FLD_MOD(r, dispc, 0, 0); /* DISPC_CLK_SWITCH */ ++ dss_write_reg(DSS_CONTROL, r); ++} ++ ++int dss_get_dsi_clk_source(void) ++{ ++ return FLD_GET(dss_read_reg(DSS_CONTROL), 1, 1); ++} ++ ++int dss_get_dispc_clk_source(void) ++{ ++ return FLD_GET(dss_read_reg(DSS_CONTROL), 0, 0); ++} ++ ++static irqreturn_t dss_irq_handler_omap2(int irq, void *arg) ++{ ++ dispc_irq_handler(); ++ ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t dss_irq_handler_omap3(int irq, void *arg) ++{ ++ u32 irqstatus; ++ ++ irqstatus = dss_read_reg(DSS_IRQSTATUS); ++ ++ if (irqstatus & (1<<0)) /* DISPC_IRQ */ ++ dispc_irq_handler(); ++#ifdef CONFIG_OMAP2_DSS_DSI ++ if (irqstatus & (1<<1)) /* DSI_IRQ */ ++ dsi_irq_handler(); ++#endif ++ ++ return IRQ_HANDLED; ++} ++ ++static int _omap_dss_wait_reset(void) ++{ ++ unsigned timeout = 1000; ++ ++ while (REG_GET(DSS_SYSSTATUS, 0, 0) == 0) { ++ udelay(1); ++ if (!--timeout) { ++ DSSERR("soft reset failed\n"); ++ return -ENODEV; ++ } ++ } ++ ++ return 0; ++} ++ ++static int _omap_dss_reset(void) ++{ ++ /* Soft reset */ ++ REG_FLD_MOD(DSS_SYSCONFIG, 1, 1, 1); ++ return _omap_dss_wait_reset(); ++} ++ ++void dss_set_venc_output(enum omap_dss_venc_type type) ++{ ++ int l = 0; ++ ++ if (type == OMAP_DSS_VENC_TYPE_COMPOSITE) ++ l = 0; ++ else if (type == OMAP_DSS_VENC_TYPE_SVIDEO) ++ l = 1; ++ else ++ BUG(); ++ ++ /* venc out selection. 0 = comp, 1 = svideo */ ++ REG_FLD_MOD(DSS_CONTROL, l, 6, 6); ++} ++ ++void dss_set_dac_pwrdn_bgz(bool enable) ++{ ++ REG_FLD_MOD(DSS_CONTROL, enable, 5, 5); /* DAC Power-Down Control */ ++} ++ ++int dss_init(bool skip_init) ++{ ++ int r; ++ u32 rev; ++ ++ dss.base = ioremap(DSS_BASE, DSS_SZ_REGS); ++ if (!dss.base) { ++ DSSERR("can't ioremap DSS\n"); ++ r = -ENOMEM; ++ goto fail0; ++ } ++ ++ if (!skip_init) { ++ /* We need to wait here a bit, otherwise we sometimes start to ++ * get synclost errors, and after that only power cycle will ++ * restore DSS functionality. I have no idea why this happens. ++ * And we have to wait _before_ resetting the DSS, but after ++ * enabling clocks. ++ */ ++ msleep(50); ++ ++ _omap_dss_reset(); ++ ++ } ++ else ++ printk("DSS SKIP RESET\n"); ++ ++ /* autoidle */ ++ REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0); ++ ++ /* Select DPLL */ ++ REG_FLD_MOD(DSS_CONTROL, 0, 0, 0); ++ ++#ifdef CONFIG_OMAP2_DSS_VENC ++ REG_FLD_MOD(DSS_CONTROL, 1, 4, 4); /* venc dac demen */ ++ REG_FLD_MOD(DSS_CONTROL, 1, 3, 3); /* venc clock 4x enable */ ++ REG_FLD_MOD(DSS_CONTROL, 0, 2, 2); /* venc clock mode = normal */ ++#endif ++ ++ r = request_irq(INT_24XX_DSS_IRQ, ++ cpu_is_omap24xx() ++ ? dss_irq_handler_omap2 ++ : dss_irq_handler_omap3, ++ 0, "OMAP DSS", NULL); ++ ++ if (r < 0) { ++ DSSERR("omap2 dss: request_irq failed\n"); ++ goto fail1; ++ } ++ ++ dss_save_context(); ++ ++ rev = dss_read_reg(DSS_REVISION); ++ printk(KERN_INFO "OMAP DSS rev %d.%d\n", ++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); ++ ++ return 0; ++ ++fail1: ++ iounmap(dss.base); ++fail0: ++ return r; ++} ++ ++void dss_exit(void) ++{ ++ free_irq(INT_24XX_DSS_IRQ, NULL); ++ ++ iounmap(dss.base); ++} ++ +diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h +new file mode 100644 +index 0000000..bac5ece +--- /dev/null ++++ b/drivers/video/omap2/dss/dss.h +@@ -0,0 +1,331 @@ ++/* ++ * linux/drivers/video/omap2/dss/dss.h ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#ifndef __OMAP2_DSS_H ++#define __OMAP2_DSS_H ++ ++#ifdef CONFIG_OMAP2_DSS_DEBUG_SUPPORT ++#define DEBUG ++#endif ++ ++#ifdef DEBUG ++extern unsigned int dss_debug; ++#ifdef DSS_SUBSYS_NAME ++#define DSSDBG(format, ...) \ ++ if (dss_debug) \ ++ printk(KERN_DEBUG "omapdss " DSS_SUBSYS_NAME ": " format, \ ++ ## __VA_ARGS__) ++#else ++#define DSSDBG(format, ...) \ ++ if (dss_debug) \ ++ printk(KERN_DEBUG "omapdss: " format, ## __VA_ARGS__) ++#endif ++ ++#ifdef DSS_SUBSYS_NAME ++#define DSSDBGF(format, ...) \ ++ if (dss_debug) \ ++ printk(KERN_DEBUG "omapdss " DSS_SUBSYS_NAME \ ++ ": %s(" format ")\n", \ ++ __func__, \ ++ ## __VA_ARGS__) ++#else ++#define DSSDBGF(format, ...) \ ++ if (dss_debug) \ ++ printk(KERN_DEBUG "omapdss: " \ ++ ": %s(" format ")\n", \ ++ __func__, \ ++ ## __VA_ARGS__) ++#endif ++ ++#else /* DEBUG */ ++#define DSSDBG(format, ...) ++#define DSSDBGF(format, ...) ++#endif ++ ++ ++#ifdef DSS_SUBSYS_NAME ++#define DSSERR(format, ...) \ ++ printk(KERN_ERR "omapdss " DSS_SUBSYS_NAME " error: " format, \ ++ ## __VA_ARGS__) ++#else ++#define DSSERR(format, ...) \ ++ printk(KERN_ERR "omapdss error: " format, ## __VA_ARGS__) ++#endif ++ ++#ifdef DSS_SUBSYS_NAME ++#define DSSINFO(format, ...) \ ++ printk(KERN_INFO "omapdss " DSS_SUBSYS_NAME ": " format, \ ++ ## __VA_ARGS__) ++#else ++#define DSSINFO(format, ...) \ ++ printk(KERN_INFO "omapdss: " format, ## __VA_ARGS__) ++#endif ++ ++#ifdef DSS_SUBSYS_NAME ++#define DSSWARN(format, ...) \ ++ printk(KERN_WARNING "omapdss " DSS_SUBSYS_NAME ": " format, \ ++ ## __VA_ARGS__) ++#else ++#define DSSWARN(format, ...) \ ++ printk(KERN_WARNING "omapdss: " format, ## __VA_ARGS__) ++#endif ++ ++/* OMAP TRM gives bitfields as start:end, where start is the higher bit ++ number. For example 7:0 */ ++#define FLD_MASK(start, end) (((1 << (start - end + 1)) - 1) << (end)) ++#define FLD_VAL(val, start, end) (((val) << end) & FLD_MASK(start, end)) ++#define FLD_GET(val, start, end) (((val) & FLD_MASK(start, end)) >> (end)) ++#define FLD_MOD(orig, val, start, end) \ ++ (((orig) & ~FLD_MASK(start, end)) | FLD_VAL(val, start, end)) ++ ++#define DISPC_MAX_FCK 173000000 ++ ++enum omap_burst_size { ++ OMAP_DSS_BURST_4x32 = 0, ++ OMAP_DSS_BURST_8x32 = 1, ++ OMAP_DSS_BURST_16x32 = 2, ++}; ++ ++enum omap_parallel_interface_mode { ++ OMAP_DSS_PARALLELMODE_BYPASS, /* MIPI DPI */ ++ OMAP_DSS_PARALLELMODE_RFBI, /* MIPI DBI */ ++ OMAP_DSS_PARALLELMODE_DSI, ++}; ++ ++enum dss_clock { ++ DSS_CLK_ICK = 1 << 0, ++ DSS_CLK_FCK1 = 1 << 1, ++ DSS_CLK_FCK2 = 1 << 2, ++ DSS_CLK_54M = 1 << 3, ++ DSS_CLK_96M = 1 << 4, ++}; ++ ++struct dispc_clock_info { ++ /* rates that we get with dividers below */ ++ unsigned long fck; ++ unsigned long lck; ++ unsigned long pck; ++ ++ /* dividers */ ++ u16 fck_div; ++ u16 lck_div; ++ u16 pck_div; ++}; ++ ++struct dsi_clock_info { ++ /* rates that we get with dividers below */ ++ unsigned long fint; ++ unsigned long dsiphy; ++ unsigned long clkin; ++ unsigned long dsi1_pll_fclk; ++ unsigned long dsi2_pll_fclk; ++ unsigned long lck; ++ unsigned long pck; ++ ++ /* dividers */ ++ u16 regn; ++ u16 regm; ++ u16 regm3; ++ u16 regm4; ++ ++ u16 lck_div; ++ u16 pck_div; ++ ++ u8 highfreq; ++ bool use_dss2_fck; ++}; ++ ++struct seq_file; ++struct platform_device; ++ ++/* core */ ++void dss_clk_enable(enum dss_clock clks); ++void dss_clk_disable(enum dss_clock clks); ++unsigned long dss_clk_get_rate(enum dss_clock clk); ++int dss_need_ctx_restore(void); ++void dss_dump_clocks(struct seq_file *s); ++ ++int dss_dsi_power_up(void); ++void dss_dsi_power_down(void); ++ ++/* display */ ++void dss_init_displays(struct platform_device *pdev); ++void dss_uninit_displays(struct platform_device *pdev); ++int dss_suspend_all_displays(void); ++int dss_resume_all_displays(void); ++struct omap_display *dss_get_display(int no); ++ ++/* manager */ ++int dss_init_overlay_managers(struct platform_device *pdev); ++void dss_uninit_overlay_managers(struct platform_device *pdev); ++ ++/* overlay */ ++void dss_init_overlays(struct platform_device *pdev, const char *def_disp_name); ++void dss_uninit_overlays(struct platform_device *pdev); ++int dss_check_overlay(struct omap_overlay *ovl, struct omap_display *display); ++void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr); ++ ++/* DSS */ ++int dss_init(bool skip_init); ++void dss_exit(void); ++ ++void dss_save_context(void); ++void dss_restore_context(void); ++ ++void dss_dump_regs(struct seq_file *s); ++ ++void dss_sdi_init(u8 datapairs); ++void dss_sdi_enable(void); ++void dss_sdi_disable(void); ++ ++void dss_select_clk_source(bool dsi, bool dispc); ++int dss_get_dsi_clk_source(void); ++int dss_get_dispc_clk_source(void); ++void dss_set_venc_output(enum omap_dss_venc_type type); ++void dss_set_dac_pwrdn_bgz(bool enable); ++ ++/* SDI */ ++int sdi_init(bool skip_init); ++void sdi_exit(void); ++void sdi_init_display(struct omap_display *display); ++ ++/* DSI */ ++int dsi_init(void); ++void dsi_exit(void); ++ ++void dsi_dump_clocks(struct seq_file *s); ++void dsi_dump_regs(struct seq_file *s); ++ ++void dsi_save_context(void); ++void dsi_restore_context(void); ++ ++void dsi_init_display(struct omap_display *display); ++void dsi_irq_handler(void); ++unsigned long dsi_get_dsi1_pll_rate(void); ++unsigned long dsi_get_dsi2_pll_rate(void); ++int dsi_pll_calc_pck(bool is_tft, unsigned long req_pck, ++ struct dsi_clock_info *cinfo); ++int dsi_pll_program(struct dsi_clock_info *cinfo); ++int dsi_pll_init(bool enable_hsclk, bool enable_hsdiv); ++void dsi_pll_uninit(void); ++ ++/* DPI */ ++int dpi_init(void); ++void dpi_exit(void); ++void dpi_init_display(struct omap_display *display); ++ ++/* DISPC */ ++int dispc_init(void); ++void dispc_exit(void); ++void dispc_dump_clocks(struct seq_file *s); ++void dispc_dump_regs(struct seq_file *s); ++void dispc_irq_handler(void); ++void dispc_fake_vsync_irq(void); ++ ++void dispc_save_context(void); ++void dispc_restore_context(void); ++ ++void dispc_lcd_enable_signal_polarity(bool act_high); ++void dispc_lcd_enable_signal(bool enable); ++void dispc_pck_free_enable(bool enable); ++void dispc_enable_fifohandcheck(bool enable); ++ ++void dispc_set_lcd_size(u16 width, u16 height); ++void dispc_set_digit_size(u16 width, u16 height); ++u32 dispc_get_plane_fifo_size(enum omap_plane plane); ++void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high); ++void dispc_enable_fifomerge(bool enable); ++void dispc_set_burst_size(enum omap_plane plane, ++ enum omap_burst_size burst_size); ++ ++void dispc_set_plane_ba0(enum omap_plane plane, u32 paddr); ++void dispc_set_plane_ba1(enum omap_plane plane, u32 paddr); ++void dispc_set_plane_pos(enum omap_plane plane, u16 x, u16 y); ++void dispc_set_plane_size(enum omap_plane plane, u16 width, u16 height); ++ ++int dispc_setup_plane(enum omap_plane plane, enum omap_channel channel_out, ++ u32 paddr, u16 screen_width, ++ u16 pos_x, u16 pos_y, ++ u16 width, u16 height, ++ u16 out_width, u16 out_height, ++ enum omap_color_mode color_mode, ++ bool ilace, ++ u8 rotation, bool mirror); ++ ++void dispc_go(enum omap_channel channel); ++void dispc_enable_lcd_out(bool enable); ++void dispc_enable_digit_out(bool enable); ++int dispc_enable_plane(enum omap_plane plane, bool enable); ++ ++void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode); ++void dispc_set_tft_data_lines(u8 data_lines); ++void dispc_set_lcd_display_type(enum omap_lcd_display_type type); ++void dispc_set_loadmode(enum omap_dss_load_mode mode); ++ ++void dispc_set_default_color(enum omap_channel channel, u32 color); ++u32 dispc_get_default_color(enum omap_channel channel); ++void dispc_set_trans_key(enum omap_channel ch, ++ enum omap_dss_color_key_type type, ++ u32 trans_key); ++void dispc_get_trans_key(enum omap_channel ch, ++ enum omap_dss_color_key_type *type, ++ u32 *trans_key); ++void dispc_enable_trans_key(enum omap_channel ch, bool enable); ++bool dispc_trans_key_enabled(enum omap_channel ch); ++ ++void dispc_set_lcd_timings(struct omap_video_timings *timings); ++unsigned long dispc_fclk_rate(void); ++unsigned long dispc_pclk_rate(void); ++void dispc_set_pol_freq(struct omap_panel *panel); ++void find_lck_pck_divs(bool is_tft, unsigned long req_pck, unsigned long fck, ++ u16 *lck_div, u16 *pck_div); ++int dispc_calc_clock_div(bool is_tft, unsigned long req_pck, ++ struct dispc_clock_info *cinfo); ++int dispc_set_clock_div(struct dispc_clock_info *cinfo); ++int dispc_get_clock_div(struct dispc_clock_info *cinfo); ++void dispc_set_lcd_divisor(u16 lck_div, u16 pck_div); ++ ++void dispc_setup_partial_planes(struct omap_display *display, ++ u16 *x, u16 *y, u16 *w, u16 *h); ++void dispc_draw_partial_planes(struct omap_display *display); ++ ++ ++/* VENC */ ++int venc_init(void); ++void venc_exit(void); ++void venc_dump_regs(struct seq_file *s); ++void venc_init_display(struct omap_display *display); ++ ++/* RFBI */ ++int rfbi_init(void); ++void rfbi_exit(void); ++void rfbi_dump_regs(struct seq_file *s); ++ ++int rfbi_configure(int rfbi_module, int bpp, int lines); ++void rfbi_enable_rfbi(bool enable); ++void rfbi_transfer_area(u16 width, u16 height, ++ void (callback)(void *data), void *data); ++void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t); ++unsigned long rfbi_get_max_tx_rate(void); ++void rfbi_init_display(struct omap_display *display); ++ ++#endif +diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c +new file mode 100644 +index 0000000..b0fee80 +--- /dev/null ++++ b/drivers/video/omap2/dss/manager.c +@@ -0,0 +1,576 @@ ++/* ++ * linux/drivers/video/omap2/dss/manager.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "MANAGER" ++ ++#include ++#include ++#include ++ ++#include ++ ++#include "dss.h" ++ ++static int num_managers; ++static struct list_head manager_list; ++ ++static ssize_t manager_name_show(struct omap_overlay_manager *mgr, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%s\n", mgr->name); ++} ++ ++static ssize_t manager_display_show(struct omap_overlay_manager *mgr, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%s\n", ++ mgr->display ? mgr->display->name : ""); ++} ++ ++static ssize_t manager_display_store(struct omap_overlay_manager *mgr, const char *buf, size_t size) ++{ ++ int r, i; ++ int len = size; ++ struct omap_display *display = NULL; ++ ++ if (buf[size-1] == '\n') ++ --len; ++ ++ if (len > 0) { ++ for (i = 0; i < omap_dss_get_num_displays(); ++i) { ++ display = dss_get_display(i); ++ ++ if (strncmp(buf, display->name, len) == 0) ++ break; ++ ++ display = NULL; ++ } ++ } ++ ++ if (len > 0 && display == NULL) ++ return -EINVAL; ++ ++ if (display) ++ DSSDBG("display %s found\n", display->name); ++ ++ if (mgr->display) { ++ r = mgr->unset_display(mgr); ++ if (r) { ++ DSSERR("failed to unset display\n"); ++ return r; ++ } ++ } ++ ++ if (display) { ++ r = mgr->set_display(mgr, display); ++ if (r) { ++ DSSERR("failed to set manager\n"); ++ return r; ++ } ++ ++ r = mgr->apply(mgr); ++ if (r) { ++ DSSERR("failed to apply dispc config\n"); ++ return r; ++ } ++ } ++ ++ return size; ++} ++ ++static ssize_t manager_default_color_show(struct omap_overlay_manager *mgr, ++ char *buf) ++{ ++ u32 default_color; ++ ++ default_color = dispc_get_default_color(mgr->id); ++ return snprintf(buf, PAGE_SIZE, "%d", default_color); ++} ++ ++static ssize_t manager_default_color_store(struct omap_overlay_manager *mgr, ++ const char *buf, size_t size) ++{ ++ u32 default_color; ++ ++ if (sscanf(buf, "%d", &default_color) != 1) ++ return -EINVAL; ++ dispc_set_default_color(mgr->id, default_color); ++ ++ return size; ++} ++ ++static const char *color_key_type_str[] = { ++ "gfx-destination", ++ "video-source", ++}; ++ ++static ssize_t manager_color_key_type_show(struct omap_overlay_manager *mgr, ++ char *buf) ++{ ++ enum omap_dss_color_key_type key_type; ++ ++ dispc_get_trans_key(mgr->id, &key_type, NULL); ++ BUG_ON(key_type >= ARRAY_SIZE(color_key_type_str)); ++ ++ return snprintf(buf, PAGE_SIZE, "%s\n", color_key_type_str[key_type]); ++} ++ ++static ssize_t manager_color_key_type_store(struct omap_overlay_manager *mgr, ++ const char *buf, size_t size) ++{ ++ enum omap_dss_color_key_type key_type; ++ u32 key_value; ++ ++ for (key_type = OMAP_DSS_COLOR_KEY_GFX_DST; ++ key_type < ARRAY_SIZE(color_key_type_str); key_type++) { ++ if (sysfs_streq(buf, color_key_type_str[key_type])) ++ break; ++ } ++ if (key_type == ARRAY_SIZE(color_key_type_str)) ++ return -EINVAL; ++ dispc_get_trans_key(mgr->id, NULL, &key_value); ++ dispc_set_trans_key(mgr->id, key_type, key_value); ++ ++ return size; ++} ++ ++static ssize_t manager_color_key_value_show(struct omap_overlay_manager *mgr, ++ char *buf) ++{ ++ u32 key_value; ++ ++ dispc_get_trans_key(mgr->id, NULL, &key_value); ++ ++ return snprintf(buf, PAGE_SIZE, "%d\n", key_value); ++} ++ ++static ssize_t manager_color_key_value_store(struct omap_overlay_manager *mgr, ++ const char *buf, size_t size) ++{ ++ enum omap_dss_color_key_type key_type; ++ u32 key_value; ++ ++ if (sscanf(buf, "%d", &key_value) != 1) ++ return -EINVAL; ++ dispc_get_trans_key(mgr->id, &key_type, NULL); ++ dispc_set_trans_key(mgr->id, key_type, key_value); ++ ++ return size; ++} ++ ++static ssize_t manager_color_key_enabled_show(struct omap_overlay_manager *mgr, ++ char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d\n", ++ dispc_trans_key_enabled(mgr->id)); ++} ++ ++static ssize_t manager_color_key_enabled_store(struct omap_overlay_manager *mgr, ++ const char *buf, size_t size) ++{ ++ int enable; ++ ++ if (sscanf(buf, "%d", &enable) != 1) ++ return -EINVAL; ++ ++ dispc_enable_trans_key(mgr->id, enable); ++ ++ return size; ++} ++ ++ ++struct manager_attribute { ++ struct attribute attr; ++ ssize_t (*show)(struct omap_overlay_manager *, char *); ++ ssize_t (*store)(struct omap_overlay_manager *, const char *, size_t); ++}; ++ ++#define MANAGER_ATTR(_name, _mode, _show, _store) \ ++ struct manager_attribute manager_attr_##_name = \ ++ __ATTR(_name, _mode, _show, _store) ++ ++static MANAGER_ATTR(name, S_IRUGO, manager_name_show, NULL); ++static MANAGER_ATTR(display, S_IRUGO|S_IWUSR, ++ manager_display_show, manager_display_store); ++static MANAGER_ATTR(default_color, S_IRUGO|S_IWUSR, ++ manager_default_color_show, manager_default_color_store); ++static MANAGER_ATTR(color_key_type, S_IRUGO|S_IWUSR, ++ manager_color_key_type_show, manager_color_key_type_store); ++static MANAGER_ATTR(color_key_value, S_IRUGO|S_IWUSR, ++ manager_color_key_value_show, manager_color_key_value_store); ++static MANAGER_ATTR(color_key_enabled, S_IRUGO|S_IWUSR, ++ manager_color_key_enabled_show, manager_color_key_enabled_store); ++ ++static struct attribute *manager_sysfs_attrs[] = { ++ &manager_attr_name.attr, ++ &manager_attr_display.attr, ++ &manager_attr_default_color.attr, ++ &manager_attr_color_key_type.attr, ++ &manager_attr_color_key_value.attr, ++ &manager_attr_color_key_enabled.attr, ++ NULL ++}; ++ ++static ssize_t manager_attr_show(struct kobject *kobj, struct attribute *attr, char *buf) ++{ ++ struct omap_overlay_manager *manager; ++ struct manager_attribute *manager_attr; ++ ++ manager = container_of(kobj, struct omap_overlay_manager, kobj); ++ manager_attr = container_of(attr, struct manager_attribute, attr); ++ ++ if (!manager_attr->show) ++ return -ENOENT; ++ ++ return manager_attr->show(manager, buf); ++} ++ ++static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr, ++ const char *buf, size_t size) ++{ ++ struct omap_overlay_manager *manager; ++ struct manager_attribute *manager_attr; ++ ++ manager = container_of(kobj, struct omap_overlay_manager, kobj); ++ manager_attr = container_of(attr, struct manager_attribute, attr); ++ ++ if (!manager_attr->store) ++ return -ENOENT; ++ ++ return manager_attr->store(manager, buf, size); ++} ++ ++static struct sysfs_ops manager_sysfs_ops = { ++ .show = manager_attr_show, ++ .store = manager_attr_store, ++}; ++ ++static struct kobj_type manager_ktype = { ++ .sysfs_ops = &manager_sysfs_ops, ++ .default_attrs = manager_sysfs_attrs, ++}; ++ ++static int omap_dss_set_display(struct omap_overlay_manager *mgr, ++ struct omap_display *display) ++{ ++ int i; ++ int r; ++ ++ if (display->manager) { ++ DSSERR("display '%s' already has a manager '%s'\n", ++ display->name, display->manager->name); ++ return -EINVAL; ++ } ++ ++ if ((mgr->supported_displays & display->type) == 0) { ++ DSSERR("display '%s' does not support manager '%s'\n", ++ display->name, mgr->name); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < mgr->num_overlays; i++) { ++ struct omap_overlay *ovl = mgr->overlays[i]; ++ ++ if (ovl->manager != mgr || !ovl->info.enabled) ++ continue; ++ ++ r = dss_check_overlay(ovl, display); ++ if (r) ++ return r; ++ } ++ ++ display->manager = mgr; ++ mgr->display = display; ++ ++ return 0; ++} ++ ++static int omap_dss_unset_display(struct omap_overlay_manager *mgr) ++{ ++ if (!mgr->display) { ++ DSSERR("failed to unset display, display not set.\n"); ++ return -EINVAL; ++ } ++ ++ mgr->display->manager = NULL; ++ mgr->display = NULL; ++ ++ return 0; ++} ++ ++ ++static int overlay_enabled(struct omap_overlay *ovl) ++{ ++ return ovl->info.enabled && ovl->manager && ovl->manager->display; ++} ++ ++/* We apply settings to both managers here so that we can use optimizations ++ * like fifomerge. Shadow registers can be changed first and the non-shadowed ++ * should be changed last, at the same time with GO */ ++static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) ++{ ++ int i; ++ int ret = 0; ++ enum omap_dss_update_mode mode; ++ struct omap_display *display; ++ struct omap_overlay *ovl; ++ bool ilace = 0; ++ int outw, outh; ++ int r; ++ int num_planes_enabled = 0; ++ ++ DSSDBG("omap_dss_mgr_apply(%s)\n", mgr->name); ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ /* Configure normal overlay parameters and disable unused overlays */ ++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) { ++ ovl = omap_dss_get_overlay(i); ++ ++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) ++ continue; ++ ++ if (!overlay_enabled(ovl)) { ++ dispc_enable_plane(ovl->id, 0); ++ continue; ++ } ++ ++ display = ovl->manager->display; ++ ++ if (dss_check_overlay(ovl, display)) { ++ dispc_enable_plane(ovl->id, 0); ++ continue; ++ } ++ ++ ++num_planes_enabled; ++ ++ /* On a manual update display, in manual update mode, update() ++ * handles configuring planes */ ++ mode = OMAP_DSS_UPDATE_AUTO; ++ if (display->get_update_mode) ++ mode = display->get_update_mode(mgr->display); ++ ++ if (display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE && ++ mode != OMAP_DSS_UPDATE_AUTO) ++ continue; ++ ++ if (display->type == OMAP_DISPLAY_TYPE_VENC) ++ ilace = 1; ++ ++ if (ovl->info.out_width == 0) ++ outw = ovl->info.width; ++ else ++ outw = ovl->info.out_width; ++ ++ if (ovl->info.out_height == 0) ++ outh = ovl->info.height; ++ else ++ outh = ovl->info.out_height; ++ ++ r = dispc_setup_plane(ovl->id, ovl->manager->id, ++ ovl->info.paddr, ++ ovl->info.screen_width, ++ ovl->info.pos_x, ++ ovl->info.pos_y, ++ ovl->info.width, ++ ovl->info.height, ++ outw, ++ outh, ++ ovl->info.color_mode, ++ ilace, ++ ovl->info.rotation, ++ ovl->info.mirror); ++ ++ if (r) { ++ DSSERR("dispc_setup_plane failed for ovl %d\n", ++ ovl->id); ++ dispc_enable_plane(ovl->id, 0); ++ continue; ++ } ++ ++ dispc_enable_plane(ovl->id, 1); ++ } ++ ++ /* Enable fifo merge if possible */ ++ dispc_enable_fifomerge(num_planes_enabled == 1); ++ ++ /* Go through overlays again. This time we configure fifos. We have to ++ * do this after enabling/disabling fifomerge so that we have correct ++ * knowledge of fifo sizes */ ++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) { ++ ovl = omap_dss_get_overlay(i); ++ ++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) ++ continue; ++ ++ if (!overlay_enabled(ovl)) { ++ continue; ++ } ++ ++ ovl->manager->display->configure_overlay(ovl); ++ } ++ ++ /* Issue GO for managers */ ++ list_for_each_entry(mgr, &manager_list, list) { ++ if (!(mgr->caps & OMAP_DSS_OVL_MGR_CAP_DISPC)) ++ continue; ++ ++ display = mgr->display; ++ ++ if (!display) ++ continue; ++ ++ /* We don't need GO with manual update display. LCD iface will ++ * always be turned off after frame, and new settings will ++ * be taken in to use at next update */ ++ if (display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) ++ continue; ++ ++ dispc_go(mgr->id); ++ } ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ return ret; ++} ++ ++static void omap_dss_mgr_set_def_color(struct omap_overlay_manager *mgr, ++ u32 color) ++{ ++ dispc_set_default_color(mgr->id, color); ++} ++ ++static void omap_dss_mgr_set_trans_key(struct omap_overlay_manager *mgr, ++ enum omap_dss_color_key_type type, ++ u32 trans_key) ++{ ++ dispc_set_trans_key(mgr->id, type, trans_key); ++} ++ ++static void omap_dss_mgr_enable_trans_key(struct omap_overlay_manager *mgr, ++ bool enable) ++{ ++ dispc_enable_trans_key(mgr->id, enable); ++} ++ ++static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager) ++{ ++ ++num_managers; ++ list_add_tail(&manager->list, &manager_list); ++} ++ ++int dss_init_overlay_managers(struct platform_device *pdev) ++{ ++ int i, r; ++ ++ INIT_LIST_HEAD(&manager_list); ++ ++ num_managers = 0; ++ ++ for (i = 0; i < 2; ++i) { ++ struct omap_overlay_manager *mgr; ++ mgr = kzalloc(sizeof(*mgr), GFP_KERNEL); ++ ++ BUG_ON(mgr == NULL); ++ ++ switch (i) { ++ case 0: ++ mgr->name = "lcd"; ++ mgr->id = OMAP_DSS_CHANNEL_LCD; ++ mgr->supported_displays = ++ OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI | ++ OMAP_DISPLAY_TYPE_SDI | OMAP_DISPLAY_TYPE_DSI; ++ break; ++ case 1: ++ mgr->name = "tv"; ++ mgr->id = OMAP_DSS_CHANNEL_DIGIT; ++ mgr->supported_displays = OMAP_DISPLAY_TYPE_VENC; ++ break; ++ } ++ ++ mgr->set_display = &omap_dss_set_display, ++ mgr->unset_display = &omap_dss_unset_display, ++ mgr->apply = &omap_dss_mgr_apply, ++ mgr->set_default_color = &omap_dss_mgr_set_def_color, ++ mgr->set_trans_key = &omap_dss_mgr_set_trans_key, ++ mgr->enable_trans_key = &omap_dss_mgr_enable_trans_key, ++ mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC, ++ ++ dss_overlay_setup_dispc_manager(mgr); ++ ++ omap_dss_add_overlay_manager(mgr); ++ ++ r = kobject_init_and_add(&mgr->kobj, &manager_ktype, ++ &pdev->dev.kobj, "manager%d", i); ++ ++ if (r) { ++ DSSERR("failed to create sysfs file\n"); ++ continue; ++ } ++ } ++ ++ return 0; ++} ++ ++void dss_uninit_overlay_managers(struct platform_device *pdev) ++{ ++ struct omap_overlay_manager *mgr; ++ ++ while (!list_empty(&manager_list)) { ++ mgr = list_first_entry(&manager_list, ++ struct omap_overlay_manager, list); ++ list_del(&mgr->list); ++ kobject_del(&mgr->kobj); ++ kobject_put(&mgr->kobj); ++ kfree(mgr); ++ } ++ ++ num_managers = 0; ++} ++ ++int omap_dss_get_num_overlay_managers(void) ++{ ++ return num_managers; ++} ++EXPORT_SYMBOL(omap_dss_get_num_overlay_managers); ++ ++struct omap_overlay_manager *omap_dss_get_overlay_manager(int num) ++{ ++ int i = 0; ++ struct omap_overlay_manager *mgr; ++ ++ list_for_each_entry(mgr, &manager_list, list) { ++ if (i++ == num) ++ return mgr; ++ } ++ ++ return NULL; ++} ++EXPORT_SYMBOL(omap_dss_get_overlay_manager); ++ ++#ifdef L4_EXAMPLE ++static int ovl_mgr_apply_l4(struct omap_overlay_manager *mgr) ++{ ++ DSSDBG("omap_dss_mgr_apply_l4(%s)\n", mgr->name); ++ ++ return 0; ++} ++#endif ++ +diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c +new file mode 100644 +index 0000000..968edbe +--- /dev/null ++++ b/drivers/video/omap2/dss/overlay.c +@@ -0,0 +1,587 @@ ++/* ++ * linux/drivers/video/omap2/dss/overlay.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "OVERLAY" ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include "dss.h" ++ ++static int num_overlays; ++static struct list_head overlay_list; ++ ++static ssize_t overlay_name_show(struct omap_overlay *ovl, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%s\n", ovl->name); ++} ++ ++static ssize_t overlay_manager_show(struct omap_overlay *ovl, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%s\n", ++ ovl->manager ? ovl->manager->name : ""); ++} ++ ++static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf, size_t size) ++{ ++ int i, r; ++ struct omap_overlay_manager *mgr = NULL; ++ int len = size; ++ ++ if (buf[size-1] == '\n') ++ --len; ++ ++ if (len > 0) { ++ for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { ++ mgr = omap_dss_get_overlay_manager(i); ++ ++ if (strncmp(buf, mgr->name, len) == 0) ++ break; ++ ++ mgr = NULL; ++ } ++ } ++ ++ if (len > 0 && mgr == NULL) ++ return -EINVAL; ++ ++ if (mgr) ++ DSSDBG("manager %s found\n", mgr->name); ++ ++ if (mgr != ovl->manager) { ++ /* detach old manager */ ++ if (ovl->manager) { ++ r = ovl->unset_manager(ovl); ++ if (r) { ++ DSSERR("detach failed\n"); ++ return r; ++ } ++ } ++ ++ if (mgr) { ++ r = ovl->set_manager(ovl, mgr); ++ if (r) { ++ DSSERR("Failed to attach overlay\n"); ++ return r; ++ } ++ } ++ } ++ ++ if (ovl->manager && (r = ovl->manager->apply(ovl->manager))) ++ return r; ++ ++ return size; ++} ++ ++static ssize_t overlay_input_size_show(struct omap_overlay *ovl, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d,%d\n", ++ ovl->info.width, ovl->info.height); ++} ++ ++static ssize_t overlay_screen_width_show(struct omap_overlay *ovl, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d\n", ovl->info.screen_width); ++} ++ ++static ssize_t overlay_position_show(struct omap_overlay *ovl, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d,%d\n", ++ ovl->info.pos_x, ovl->info.pos_y); ++} ++ ++static ssize_t overlay_position_store(struct omap_overlay *ovl, ++ const char *buf, size_t size) ++{ ++ int r; ++ char *last; ++ struct omap_overlay_info info; ++ ++ ovl->get_overlay_info(ovl, &info); ++ ++ info.pos_x = simple_strtoul(buf, &last, 10); ++ ++last; ++ if (last - buf >= size) ++ return -EINVAL; ++ ++ info.pos_y = simple_strtoul(last, &last, 10); ++ ++ if ((r = ovl->set_overlay_info(ovl, &info))) ++ return r; ++ ++ if (ovl->manager && (r = ovl->manager->apply(ovl->manager))) ++ return r; ++ ++ return size; ++} ++ ++static ssize_t overlay_output_size_show(struct omap_overlay *ovl, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d,%d\n", ++ ovl->info.out_width, ovl->info.out_height); ++} ++ ++static ssize_t overlay_output_size_store(struct omap_overlay *ovl, ++ const char *buf, size_t size) ++{ ++ int r; ++ char *last; ++ struct omap_overlay_info info; ++ ++ ovl->get_overlay_info(ovl, &info); ++ ++ info.out_width = simple_strtoul(buf, &last, 10); ++ ++last; ++ if (last - buf >= size) ++ return -EINVAL; ++ ++ info.out_height = simple_strtoul(last, &last, 10); ++ ++ if ((r = ovl->set_overlay_info(ovl, &info))) ++ return r; ++ ++ if (ovl->manager && (r = ovl->manager->apply(ovl->manager))) ++ return r; ++ ++ return size; ++} ++ ++static ssize_t overlay_enabled_show(struct omap_overlay *ovl, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d\n", ovl->info.enabled); ++} ++ ++static ssize_t overlay_enabled_store(struct omap_overlay *ovl, const char *buf, size_t size) ++{ ++ int r; ++ struct omap_overlay_info info; ++ ++ ovl->get_overlay_info(ovl, &info); ++ ++ info.enabled = simple_strtoul(buf, NULL, 10); ++ ++ if ((r = ovl->set_overlay_info(ovl, &info))) ++ return r; ++ ++ if (ovl->manager && (r = ovl->manager->apply(ovl->manager))) ++ return r; ++ ++ return size; ++} ++ ++struct overlay_attribute { ++ struct attribute attr; ++ ssize_t (*show)(struct omap_overlay *, char *); ++ ssize_t (*store)(struct omap_overlay *, const char *, size_t); ++}; ++ ++#define OVERLAY_ATTR(_name, _mode, _show, _store) \ ++ struct overlay_attribute overlay_attr_##_name = \ ++ __ATTR(_name, _mode, _show, _store) ++ ++static OVERLAY_ATTR(name, S_IRUGO, overlay_name_show, NULL); ++static OVERLAY_ATTR(manager, S_IRUGO|S_IWUSR, ++ overlay_manager_show, overlay_manager_store); ++static OVERLAY_ATTR(input_size, S_IRUGO, overlay_input_size_show, NULL); ++static OVERLAY_ATTR(screen_width, S_IRUGO, overlay_screen_width_show, NULL); ++static OVERLAY_ATTR(position, S_IRUGO|S_IWUSR, ++ overlay_position_show, overlay_position_store); ++static OVERLAY_ATTR(output_size, S_IRUGO|S_IWUSR, ++ overlay_output_size_show, overlay_output_size_store); ++static OVERLAY_ATTR(enabled, S_IRUGO|S_IWUSR, ++ overlay_enabled_show, overlay_enabled_store); ++ ++static struct attribute *overlay_sysfs_attrs[] = { ++ &overlay_attr_name.attr, ++ &overlay_attr_manager.attr, ++ &overlay_attr_input_size.attr, ++ &overlay_attr_screen_width.attr, ++ &overlay_attr_position.attr, ++ &overlay_attr_output_size.attr, ++ &overlay_attr_enabled.attr, ++ NULL ++}; ++ ++static ssize_t overlay_attr_show(struct kobject *kobj, struct attribute *attr, char *buf) ++{ ++ struct omap_overlay *overlay; ++ struct overlay_attribute *overlay_attr; ++ ++ overlay = container_of(kobj, struct omap_overlay, kobj); ++ overlay_attr = container_of(attr, struct overlay_attribute, attr); ++ ++ if (!overlay_attr->show) ++ return -ENOENT; ++ ++ return overlay_attr->show(overlay, buf); ++} ++ ++static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr, ++ const char *buf, size_t size) ++{ ++ struct omap_overlay *overlay; ++ struct overlay_attribute *overlay_attr; ++ ++ overlay = container_of(kobj, struct omap_overlay, kobj); ++ overlay_attr = container_of(attr, struct overlay_attribute, attr); ++ ++ if (!overlay_attr->store) ++ return -ENOENT; ++ ++ return overlay_attr->store(overlay, buf, size); ++} ++ ++static struct sysfs_ops overlay_sysfs_ops = { ++ .show = overlay_attr_show, ++ .store = overlay_attr_store, ++}; ++ ++static struct kobj_type overlay_ktype = { ++ .sysfs_ops = &overlay_sysfs_ops, ++ .default_attrs = overlay_sysfs_attrs, ++}; ++ ++/* Check if overlay parameters are compatible with display */ ++int dss_check_overlay(struct omap_overlay *ovl, struct omap_display *display) ++{ ++ struct omap_overlay_info *info; ++ u16 outw, outh; ++ u16 dw, dh; ++ ++ if (!display) ++ return 0; ++ ++ if (!ovl->info.enabled) ++ return 0; ++ ++ info = &ovl->info; ++ ++ display->get_resolution(display, &dw, &dh); ++ ++ DSSDBG("check_overlay %d: (%d,%d %dx%d -> %dx%d) disp (%dx%d)\n", ++ ovl->id, ++ info->pos_x, info->pos_y, ++ info->width, info->height, ++ info->out_width, info->out_height, ++ dw, dh); ++ ++ if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { ++ outw = info->width; ++ outh = info->height; ++ } else { ++ if (info->out_width == 0) ++ outw = info->width; ++ else ++ outw = info->out_width; ++ ++ if (info->out_height == 0) ++ outh = info->height; ++ else ++ outh = info->out_height; ++ } ++ ++ if (dw < info->pos_x + outw) { ++ DSSDBG("check_overlay failed 1: %d < %d + %d\n", ++ dw, info->pos_x, outw); ++ return -EINVAL; ++ } ++ ++ if (dh < info->pos_y + outh) { ++ DSSDBG("check_overlay failed 2: %d < %d + %d\n", ++ dh, info->pos_y, outh); ++ return -EINVAL; ++ } ++ ++ if ((ovl->supported_modes & info->color_mode) == 0) { ++ DSSERR("overlay doesn't support mode %d\n", info->color_mode); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int dss_ovl_set_overlay_info(struct omap_overlay *ovl, ++ struct omap_overlay_info *info) ++{ ++ int r; ++ struct omap_overlay_info old_info; ++ ++ old_info = ovl->info; ++ ovl->info = *info; ++ ++ if (ovl->manager) { ++ r = dss_check_overlay(ovl, ovl->manager->display); ++ if (r) { ++ ovl->info = old_info; ++ return r; ++ } ++ } ++ ++ return 0; ++} ++ ++static void dss_ovl_get_overlay_info(struct omap_overlay *ovl, ++ struct omap_overlay_info *info) ++{ ++ *info = ovl->info; ++} ++ ++static int omap_dss_set_manager(struct omap_overlay *ovl, ++ struct omap_overlay_manager *mgr) ++{ ++ int r; ++ ++ if (ovl->manager) { ++ DSSERR("overlay '%s' already has a manager '%s'\n", ++ ovl->name, ovl->manager->name); ++ } ++ ++ r = dss_check_overlay(ovl, mgr->display); ++ if (r) ++ return r; ++ ++ ovl->manager = mgr; ++ ++ return 0; ++} ++ ++static int omap_dss_unset_manager(struct omap_overlay *ovl) ++{ ++ if (!ovl->manager) { ++ DSSERR("failed to detach overlay: manager not set\n"); ++ return -EINVAL; ++ } ++ ++ ovl->manager = NULL; ++ ++ return 0; ++} ++ ++int omap_dss_get_num_overlays(void) ++{ ++ return num_overlays; ++} ++EXPORT_SYMBOL(omap_dss_get_num_overlays); ++ ++struct omap_overlay *omap_dss_get_overlay(int num) ++{ ++ int i = 0; ++ struct omap_overlay *ovl; ++ ++ list_for_each_entry(ovl, &overlay_list, list) { ++ if (i++ == num) ++ return ovl; ++ } ++ ++ return NULL; ++} ++EXPORT_SYMBOL(omap_dss_get_overlay); ++ ++static void omap_dss_add_overlay(struct omap_overlay *overlay) ++{ ++ ++num_overlays; ++ list_add_tail(&overlay->list, &overlay_list); ++} ++ ++static struct omap_overlay *dispc_overlays[3]; ++ ++void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr) ++{ ++ mgr->num_overlays = 3; ++ mgr->overlays = dispc_overlays; ++} ++ ++void dss_init_overlays(struct platform_device *pdev, const char *def_disp_name) ++{ ++ int i, r; ++ struct omap_overlay_manager *lcd_mgr; ++ struct omap_overlay_manager *tv_mgr; ++ struct omap_overlay_manager *def_mgr = NULL; ++ ++ INIT_LIST_HEAD(&overlay_list); ++ ++ num_overlays = 0; ++ ++ for (i = 0; i < 3; ++i) { ++ struct omap_overlay *ovl; ++ ovl = kzalloc(sizeof(*ovl), GFP_KERNEL); ++ ++ BUG_ON(ovl == NULL); ++ ++ switch (i) { ++ case 0: ++ ovl->name = "gfx"; ++ ovl->id = OMAP_DSS_GFX; ++ ovl->supported_modes = OMAP_DSS_COLOR_GFX_OMAP3; ++ ovl->caps = OMAP_DSS_OVL_CAP_DISPC; ++ break; ++ case 1: ++ ovl->name = "vid1"; ++ ovl->id = OMAP_DSS_VIDEO1; ++ ovl->supported_modes = OMAP_DSS_COLOR_VID_OMAP3; ++ ovl->caps = OMAP_DSS_OVL_CAP_SCALE | ++ OMAP_DSS_OVL_CAP_DISPC; ++ break; ++ case 2: ++ ovl->name = "vid2"; ++ ovl->id = OMAP_DSS_VIDEO2; ++ ovl->supported_modes = OMAP_DSS_COLOR_VID_OMAP3; ++ ovl->caps = OMAP_DSS_OVL_CAP_SCALE | ++ OMAP_DSS_OVL_CAP_DISPC; ++ break; ++ } ++ ++ ovl->set_manager = &omap_dss_set_manager; ++ ovl->unset_manager = &omap_dss_unset_manager; ++ ovl->set_overlay_info = &dss_ovl_set_overlay_info; ++ ovl->get_overlay_info = &dss_ovl_get_overlay_info; ++ ++ omap_dss_add_overlay(ovl); ++ ++ r = kobject_init_and_add(&ovl->kobj, &overlay_ktype, ++ &pdev->dev.kobj, "overlay%d", i); ++ ++ if (r) { ++ DSSERR("failed to create sysfs file\n"); ++ continue; ++ } ++ ++ dispc_overlays[i] = ovl; ++ } ++ ++ lcd_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_LCD); ++ tv_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_TV); ++ ++ if (def_disp_name) { ++ for (i = 0; i < omap_dss_get_num_displays() ; i++) { ++ struct omap_display *display = dss_get_display(i); ++ ++ if (strcmp(display->name, def_disp_name) == 0) { ++ if (display->type != OMAP_DISPLAY_TYPE_VENC) { ++ lcd_mgr->set_display(lcd_mgr, display); ++ def_mgr = lcd_mgr; ++ } else { ++ lcd_mgr->set_display(tv_mgr, display); ++ def_mgr = tv_mgr; ++ } ++ ++ break; ++ } ++ } ++ ++ if (!def_mgr) ++ DSSWARN("default display %s not found\n", ++ def_disp_name); ++ } ++ ++ if (def_mgr != lcd_mgr) { ++ /* connect lcd manager to first non-VENC display found */ ++ for (i = 0; i < omap_dss_get_num_displays(); i++) { ++ struct omap_display *display = dss_get_display(i); ++ if (display->type != OMAP_DISPLAY_TYPE_VENC) { ++ lcd_mgr->set_display(lcd_mgr, display); ++ ++ if (!def_mgr) ++ def_mgr = lcd_mgr; ++ ++ break; ++ } ++ } ++ } ++ ++ if (def_mgr != tv_mgr) { ++ /* connect tv manager to first VENC display found */ ++ for (i = 0; i < omap_dss_get_num_displays(); i++) { ++ struct omap_display *display = dss_get_display(i); ++ if (display->type == OMAP_DISPLAY_TYPE_VENC) { ++ tv_mgr->set_display(tv_mgr, display); ++ ++ if (!def_mgr) ++ def_mgr = tv_mgr; ++ ++ break; ++ } ++ } ++ } ++ ++ /* connect all dispc overlays to def_mgr */ ++ if (def_mgr) { ++ for (i = 0; i < 3; i++) { ++ struct omap_overlay *ovl; ++ ovl = omap_dss_get_overlay(i); ++ omap_dss_set_manager(ovl, def_mgr); ++ } ++ } ++ ++#ifdef L4_EXAMPLE ++ /* setup L4 overlay as an example */ ++ { ++ static struct omap_overlay ovl = { ++ .name = "l4-ovl", ++ .supported_modes = OMAP_DSS_COLOR_RGB24U, ++ .set_manager = &omap_dss_set_manager, ++ .unset_manager = &omap_dss_unset_manager, ++ .setup_input = &omap_dss_setup_overlay_input, ++ .setup_output = &omap_dss_setup_overlay_output, ++ .enable = &omap_dss_enable_overlay, ++ }; ++ ++ static struct omap_overlay_manager mgr = { ++ .name = "l4", ++ .num_overlays = 1, ++ .overlays = &ovl, ++ .set_display = &omap_dss_set_display, ++ .unset_display = &omap_dss_unset_display, ++ .apply = &ovl_mgr_apply_l4, ++ .supported_displays = ++ OMAP_DISPLAY_TYPE_DBI | OMAP_DISPLAY_TYPE_DSI, ++ }; ++ ++ omap_dss_add_overlay(&ovl); ++ omap_dss_add_overlay_manager(&mgr); ++ omap_dss_set_manager(&ovl, &mgr); ++ } ++#endif ++} ++ ++void dss_uninit_overlays(struct platform_device *pdev) ++{ ++ struct omap_overlay *ovl; ++ ++ while (!list_empty(&overlay_list)) { ++ ovl = list_first_entry(&overlay_list, ++ struct omap_overlay, list); ++ list_del(&ovl->list); ++ kobject_del(&ovl->kobj); ++ kobject_put(&ovl->kobj); ++ kfree(ovl); ++ } ++ ++ num_overlays = 0; ++} ++ +diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c +new file mode 100644 +index 0000000..3e9ae1e +--- /dev/null ++++ b/drivers/video/omap2/dss/rfbi.c +@@ -0,0 +1,1304 @@ ++/* ++ * linux/drivers/video/omap2/dss/rfbi.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "RFBI" ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include "dss.h" ++ ++/*#define MEASURE_PERF*/ ++ ++#define RFBI_BASE 0x48050800 ++ ++struct rfbi_reg { u16 idx; }; ++ ++#define RFBI_REG(idx) ((const struct rfbi_reg) { idx }) ++ ++#define RFBI_REVISION RFBI_REG(0x0000) ++#define RFBI_SYSCONFIG RFBI_REG(0x0010) ++#define RFBI_SYSSTATUS RFBI_REG(0x0014) ++#define RFBI_CONTROL RFBI_REG(0x0040) ++#define RFBI_PIXEL_CNT RFBI_REG(0x0044) ++#define RFBI_LINE_NUMBER RFBI_REG(0x0048) ++#define RFBI_CMD RFBI_REG(0x004c) ++#define RFBI_PARAM RFBI_REG(0x0050) ++#define RFBI_DATA RFBI_REG(0x0054) ++#define RFBI_READ RFBI_REG(0x0058) ++#define RFBI_STATUS RFBI_REG(0x005c) ++ ++#define RFBI_CONFIG(n) RFBI_REG(0x0060 + (n)*0x18) ++#define RFBI_ONOFF_TIME(n) RFBI_REG(0x0064 + (n)*0x18) ++#define RFBI_CYCLE_TIME(n) RFBI_REG(0x0068 + (n)*0x18) ++#define RFBI_DATA_CYCLE1(n) RFBI_REG(0x006c + (n)*0x18) ++#define RFBI_DATA_CYCLE2(n) RFBI_REG(0x0070 + (n)*0x18) ++#define RFBI_DATA_CYCLE3(n) RFBI_REG(0x0074 + (n)*0x18) ++ ++#define RFBI_VSYNC_WIDTH RFBI_REG(0x0090) ++#define RFBI_HSYNC_WIDTH RFBI_REG(0x0094) ++ ++#define RFBI_CMD_FIFO_LEN_BYTES (16 * sizeof(struct update_param)) ++ ++#define REG_FLD_MOD(idx, val, start, end) \ ++ rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end)) ++ ++/* To work around an RFBI transfer rate limitation */ ++#define OMAP_RFBI_RATE_LIMIT 1 ++ ++enum omap_rfbi_cycleformat { ++ OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0, ++ OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1, ++ OMAP_DSS_RFBI_CYCLEFORMAT_3_1 = 2, ++ OMAP_DSS_RFBI_CYCLEFORMAT_3_2 = 3, ++}; ++ ++enum omap_rfbi_datatype { ++ OMAP_DSS_RFBI_DATATYPE_12 = 0, ++ OMAP_DSS_RFBI_DATATYPE_16 = 1, ++ OMAP_DSS_RFBI_DATATYPE_18 = 2, ++ OMAP_DSS_RFBI_DATATYPE_24 = 3, ++}; ++ ++enum omap_rfbi_parallelmode { ++ OMAP_DSS_RFBI_PARALLELMODE_8 = 0, ++ OMAP_DSS_RFBI_PARALLELMODE_9 = 1, ++ OMAP_DSS_RFBI_PARALLELMODE_12 = 2, ++ OMAP_DSS_RFBI_PARALLELMODE_16 = 3, ++}; ++ ++enum update_cmd { ++ RFBI_CMD_UPDATE = 0, ++ RFBI_CMD_SYNC = 1, ++}; ++ ++static int rfbi_convert_timings(struct rfbi_timings *t); ++static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div); ++static void process_cmd_fifo(void); ++ ++static struct { ++ void __iomem *base; ++ ++ unsigned long l4_khz; ++ ++ enum omap_rfbi_datatype datatype; ++ enum omap_rfbi_parallelmode parallelmode; ++ ++ enum omap_rfbi_te_mode te_mode; ++ int te_enabled; ++ ++ void (*framedone_callback)(void *data); ++ void *framedone_callback_data; ++ ++ struct omap_display *display[2]; ++ ++ struct kfifo *cmd_fifo; ++ spinlock_t cmd_lock; ++ struct completion cmd_done; ++ atomic_t cmd_fifo_full; ++ atomic_t cmd_pending; ++#ifdef MEASURE_PERF ++ unsigned perf_bytes; ++ ktime_t perf_setup_time; ++ ktime_t perf_start_time; ++#endif ++} rfbi; ++ ++struct update_region { ++ u16 x; ++ u16 y; ++ u16 w; ++ u16 h; ++}; ++ ++struct update_param { ++ u8 rfbi_module; ++ u8 cmd; ++ ++ union { ++ struct update_region r; ++ struct completion *sync; ++ } par; ++}; ++ ++static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val) ++{ ++ __raw_writel(val, rfbi.base + idx.idx); ++} ++ ++static inline u32 rfbi_read_reg(const struct rfbi_reg idx) ++{ ++ return __raw_readl(rfbi.base + idx.idx); ++} ++ ++static void rfbi_enable_clocks(bool enable) ++{ ++ if (enable) ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ else ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++} ++ ++void omap_rfbi_write_command(const void *buf, u32 len) ++{ ++ rfbi_enable_clocks(1); ++ switch (rfbi.parallelmode) { ++ case OMAP_DSS_RFBI_PARALLELMODE_8: ++ { ++ const u8 *b = buf; ++ for (; len; len--) ++ rfbi_write_reg(RFBI_CMD, *b++); ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_16: ++ { ++ const u16 *w = buf; ++ BUG_ON(len & 1); ++ for (; len; len -= 2) ++ rfbi_write_reg(RFBI_CMD, *w++); ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_9: ++ case OMAP_DSS_RFBI_PARALLELMODE_12: ++ default: ++ BUG(); ++ } ++ rfbi_enable_clocks(0); ++} ++EXPORT_SYMBOL(omap_rfbi_write_command); ++ ++void omap_rfbi_read_data(void *buf, u32 len) ++{ ++ rfbi_enable_clocks(1); ++ switch (rfbi.parallelmode) { ++ case OMAP_DSS_RFBI_PARALLELMODE_8: ++ { ++ u8 *b = buf; ++ for (; len; len--) { ++ rfbi_write_reg(RFBI_READ, 0); ++ *b++ = rfbi_read_reg(RFBI_READ); ++ } ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_16: ++ { ++ u16 *w = buf; ++ BUG_ON(len & ~1); ++ for (; len; len -= 2) { ++ rfbi_write_reg(RFBI_READ, 0); ++ *w++ = rfbi_read_reg(RFBI_READ); ++ } ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_9: ++ case OMAP_DSS_RFBI_PARALLELMODE_12: ++ default: ++ BUG(); ++ } ++ rfbi_enable_clocks(0); ++} ++EXPORT_SYMBOL(omap_rfbi_read_data); ++ ++void omap_rfbi_write_data(const void *buf, u32 len) ++{ ++ rfbi_enable_clocks(1); ++ switch (rfbi.parallelmode) { ++ case OMAP_DSS_RFBI_PARALLELMODE_8: ++ { ++ const u8 *b = buf; ++ for (; len; len--) ++ rfbi_write_reg(RFBI_PARAM, *b++); ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_16: ++ { ++ const u16 *w = buf; ++ BUG_ON(len & 1); ++ for (; len; len -= 2) ++ rfbi_write_reg(RFBI_PARAM, *w++); ++ break; ++ } ++ ++ case OMAP_DSS_RFBI_PARALLELMODE_9: ++ case OMAP_DSS_RFBI_PARALLELMODE_12: ++ default: ++ BUG(); ++ ++ } ++ rfbi_enable_clocks(0); ++} ++EXPORT_SYMBOL(omap_rfbi_write_data); ++ ++void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width, ++ u16 x, u16 y, ++ u16 w, u16 h) ++{ ++ int start_offset = scr_width * y + x; ++ int horiz_offset = scr_width - w; ++ int i; ++ ++ rfbi_enable_clocks(1); ++ ++ if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && ++ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { ++ const u16 __iomem *pd = buf; ++ pd += start_offset; ++ ++ for (; h; --h) { ++ for (i = 0; i < w; ++i) { ++ const u8 __iomem *b = (const u8 __iomem *)pd; ++ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1)); ++ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0)); ++ ++pd; ++ } ++ pd += horiz_offset; ++ } ++ } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_24 && ++ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) { ++ const u32 __iomem *pd = buf; ++ pd += start_offset; ++ ++ for (; h; --h) { ++ for (i = 0; i < w; ++i) { ++ const u8 __iomem *b = (const u8 __iomem *)pd; ++ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+2)); ++ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1)); ++ rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0)); ++ ++pd; ++ } ++ pd += horiz_offset; ++ } ++ } else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 && ++ rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_16) { ++ const u16 __iomem *pd = buf; ++ pd += start_offset; ++ ++ for (; h; --h) { ++ for (i = 0; i < w; ++i) { ++ rfbi_write_reg(RFBI_PARAM, __raw_readw(pd)); ++ ++pd; ++ } ++ pd += horiz_offset; ++ } ++ } else { ++ BUG(); ++ } ++ ++ rfbi_enable_clocks(0); ++} ++EXPORT_SYMBOL(omap_rfbi_write_pixels); ++ ++#ifdef MEASURE_PERF ++static void perf_mark_setup(void) ++{ ++ rfbi.perf_setup_time = ktime_get(); ++} ++ ++static void perf_mark_start(void) ++{ ++ rfbi.perf_start_time = ktime_get(); ++} ++ ++static void perf_show(const char *name) ++{ ++ ktime_t t, setup_time, trans_time; ++ u32 total_bytes; ++ u32 setup_us, trans_us, total_us; ++ ++ t = ktime_get(); ++ ++ setup_time = ktime_sub(rfbi.perf_start_time, rfbi.perf_setup_time); ++ setup_us = (u32)ktime_to_us(setup_time); ++ if (setup_us == 0) ++ setup_us = 1; ++ ++ trans_time = ktime_sub(t, rfbi.perf_start_time); ++ trans_us = (u32)ktime_to_us(trans_time); ++ if (trans_us == 0) ++ trans_us = 1; ++ ++ total_us = setup_us + trans_us; ++ ++ total_bytes = rfbi.perf_bytes; ++ ++ DSSINFO("%s update %u us + %u us = %u us (%uHz), %u bytes, " ++ "%u kbytes/sec\n", ++ name, ++ setup_us, ++ trans_us, ++ total_us, ++ 1000*1000 / total_us, ++ total_bytes, ++ total_bytes * 1000 / total_us); ++} ++#else ++#define perf_mark_setup() ++#define perf_mark_start() ++#define perf_show(x) ++#endif ++ ++void rfbi_transfer_area(u16 width, u16 height, ++ void (callback)(void *data), void *data) ++{ ++ u32 l; ++ ++ /*BUG_ON(callback == 0);*/ ++ BUG_ON(rfbi.framedone_callback != NULL); ++ ++ DSSDBG("rfbi_transfer_area %dx%d\n", width, height); ++ ++ dispc_set_lcd_size(width, height); ++ ++ dispc_enable_lcd_out(1); ++ ++ rfbi.framedone_callback = callback; ++ rfbi.framedone_callback_data = data; ++ ++ rfbi_enable_clocks(1); ++ ++ rfbi_write_reg(RFBI_PIXEL_CNT, width * height); ++ ++ l = rfbi_read_reg(RFBI_CONTROL); ++ l = FLD_MOD(l, 1, 0, 0); /* enable */ ++ if (!rfbi.te_enabled) ++ l = FLD_MOD(l, 1, 4, 4); /* ITE */ ++ ++ perf_mark_start(); ++ ++ rfbi_write_reg(RFBI_CONTROL, l); ++} ++ ++static void framedone_callback(void *data, u32 mask) ++{ ++ void (*callback)(void *data); ++ ++ DSSDBG("FRAMEDONE\n"); ++ ++ perf_show("DISPC"); ++ ++ REG_FLD_MOD(RFBI_CONTROL, 0, 0, 0); ++ ++ rfbi_enable_clocks(0); ++ ++ callback = rfbi.framedone_callback; ++ rfbi.framedone_callback = NULL; ++ ++ /*callback(rfbi.framedone_callback_data);*/ ++ ++ atomic_set(&rfbi.cmd_pending, 0); ++ ++ process_cmd_fifo(); ++} ++ ++#if 1 /* VERBOSE */ ++static void rfbi_print_timings(void) ++{ ++ u32 l; ++ u32 time; ++ ++ l = rfbi_read_reg(RFBI_CONFIG(0)); ++ time = 1000000000 / rfbi.l4_khz; ++ if (l & (1 << 4)) ++ time *= 2; ++ ++ DSSDBG("Tick time %u ps\n", time); ++ l = rfbi_read_reg(RFBI_ONOFF_TIME(0)); ++ DSSDBG("CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, " ++ "REONTIME %d, REOFFTIME %d\n", ++ l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f, ++ (l >> 20) & 0x0f, (l >> 24) & 0x3f); ++ ++ l = rfbi_read_reg(RFBI_CYCLE_TIME(0)); ++ DSSDBG("WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, " ++ "ACCESSTIME %d\n", ++ (l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f, ++ (l >> 22) & 0x3f); ++} ++#else ++static void rfbi_print_timings(void) {} ++#endif ++ ++ ++ ++ ++static u32 extif_clk_period; ++ ++static inline unsigned long round_to_extif_ticks(unsigned long ps, int div) ++{ ++ int bus_tick = extif_clk_period * div; ++ return (ps + bus_tick - 1) / bus_tick * bus_tick; ++} ++ ++static int calc_reg_timing(struct rfbi_timings *t, int div) ++{ ++ t->clk_div = div; ++ ++ t->cs_on_time = round_to_extif_ticks(t->cs_on_time, div); ++ ++ t->we_on_time = round_to_extif_ticks(t->we_on_time, div); ++ t->we_off_time = round_to_extif_ticks(t->we_off_time, div); ++ t->we_cycle_time = round_to_extif_ticks(t->we_cycle_time, div); ++ ++ t->re_on_time = round_to_extif_ticks(t->re_on_time, div); ++ t->re_off_time = round_to_extif_ticks(t->re_off_time, div); ++ t->re_cycle_time = round_to_extif_ticks(t->re_cycle_time, div); ++ ++ t->access_time = round_to_extif_ticks(t->access_time, div); ++ t->cs_off_time = round_to_extif_ticks(t->cs_off_time, div); ++ t->cs_pulse_width = round_to_extif_ticks(t->cs_pulse_width, div); ++ ++ DSSDBG("[reg]cson %d csoff %d reon %d reoff %d\n", ++ t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time); ++ DSSDBG("[reg]weon %d weoff %d recyc %d wecyc %d\n", ++ t->we_on_time, t->we_off_time, t->re_cycle_time, ++ t->we_cycle_time); ++ DSSDBG("[reg]rdaccess %d cspulse %d\n", ++ t->access_time, t->cs_pulse_width); ++ ++ return rfbi_convert_timings(t); ++} ++ ++static int calc_extif_timings(struct rfbi_timings *t) ++{ ++ u32 max_clk_div; ++ int div; ++ ++ rfbi_get_clk_info(&extif_clk_period, &max_clk_div); ++ for (div = 1; div <= max_clk_div; div++) { ++ if (calc_reg_timing(t, div) == 0) ++ break; ++ } ++ ++ if (div <= max_clk_div) ++ return 0; ++ ++ DSSERR("can't setup timings\n"); ++ return -1; ++} ++ ++ ++void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t) ++{ ++ int r; ++ ++ if (!t->converted) { ++ r = calc_extif_timings(t); ++ if (r < 0) ++ DSSERR("Failed to calc timings\n"); ++ } ++ ++ BUG_ON(!t->converted); ++ ++ rfbi_enable_clocks(1); ++ rfbi_write_reg(RFBI_ONOFF_TIME(rfbi_module), t->tim[0]); ++ rfbi_write_reg(RFBI_CYCLE_TIME(rfbi_module), t->tim[1]); ++ ++ /* TIMEGRANULARITY */ ++ REG_FLD_MOD(RFBI_CONFIG(rfbi_module), ++ (t->tim[2] ? 1 : 0), 4, 4); ++ ++ rfbi_print_timings(); ++ rfbi_enable_clocks(0); ++} ++ ++static int ps_to_rfbi_ticks(int time, int div) ++{ ++ unsigned long tick_ps; ++ int ret; ++ ++ /* Calculate in picosecs to yield more exact results */ ++ tick_ps = 1000000000 / (rfbi.l4_khz) * div; ++ ++ ret = (time + tick_ps - 1) / tick_ps; ++ ++ return ret; ++} ++ ++#ifdef OMAP_RFBI_RATE_LIMIT ++unsigned long rfbi_get_max_tx_rate(void) ++{ ++ unsigned long l4_rate, dss1_rate; ++ int min_l4_ticks = 0; ++ int i; ++ ++ /* According to TI this can't be calculated so make the ++ * adjustments for a couple of known frequencies and warn for ++ * others. ++ */ ++ static const struct { ++ unsigned long l4_clk; /* HZ */ ++ unsigned long dss1_clk; /* HZ */ ++ unsigned long min_l4_ticks; ++ } ftab[] = { ++ { 55, 132, 7, }, /* 7.86 MPix/s */ ++ { 110, 110, 12, }, /* 9.16 MPix/s */ ++ { 110, 132, 10, }, /* 11 Mpix/s */ ++ { 120, 120, 10, }, /* 12 Mpix/s */ ++ { 133, 133, 10, }, /* 13.3 Mpix/s */ ++ }; ++ ++ l4_rate = rfbi.l4_khz / 1000; ++ dss1_rate = dss_clk_get_rate(DSS_CLK_FCK1) / 1000000; ++ ++ for (i = 0; i < ARRAY_SIZE(ftab); i++) { ++ /* Use a window instead of an exact match, to account ++ * for different DPLL multiplier / divider pairs. ++ */ ++ if (abs(ftab[i].l4_clk - l4_rate) < 3 && ++ abs(ftab[i].dss1_clk - dss1_rate) < 3) { ++ min_l4_ticks = ftab[i].min_l4_ticks; ++ break; ++ } ++ } ++ if (i == ARRAY_SIZE(ftab)) { ++ /* Can't be sure, return anyway the maximum not ++ * rate-limited. This might cause a problem only for the ++ * tearing synchronisation. ++ */ ++ DSSERR("can't determine maximum RFBI transfer rate\n"); ++ return rfbi.l4_khz * 1000; ++ } ++ return rfbi.l4_khz * 1000 / min_l4_ticks; ++} ++#else ++int rfbi_get_max_tx_rate(void) ++{ ++ return rfbi.l4_khz * 1000; ++} ++#endif ++ ++static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div) ++{ ++ *clk_period = 1000000000 / rfbi.l4_khz; ++ *max_clk_div = 2; ++} ++ ++static int rfbi_convert_timings(struct rfbi_timings *t) ++{ ++ u32 l; ++ int reon, reoff, weon, weoff, cson, csoff, cs_pulse; ++ int actim, recyc, wecyc; ++ int div = t->clk_div; ++ ++ if (div <= 0 || div > 2) ++ return -1; ++ ++ /* Make sure that after conversion it still holds that: ++ * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff, ++ * csoff > cson, csoff >= max(weoff, reoff), actim > reon ++ */ ++ weon = ps_to_rfbi_ticks(t->we_on_time, div); ++ weoff = ps_to_rfbi_ticks(t->we_off_time, div); ++ if (weoff <= weon) ++ weoff = weon + 1; ++ if (weon > 0x0f) ++ return -1; ++ if (weoff > 0x3f) ++ return -1; ++ ++ reon = ps_to_rfbi_ticks(t->re_on_time, div); ++ reoff = ps_to_rfbi_ticks(t->re_off_time, div); ++ if (reoff <= reon) ++ reoff = reon + 1; ++ if (reon > 0x0f) ++ return -1; ++ if (reoff > 0x3f) ++ return -1; ++ ++ cson = ps_to_rfbi_ticks(t->cs_on_time, div); ++ csoff = ps_to_rfbi_ticks(t->cs_off_time, div); ++ if (csoff <= cson) ++ csoff = cson + 1; ++ if (csoff < max(weoff, reoff)) ++ csoff = max(weoff, reoff); ++ if (cson > 0x0f) ++ return -1; ++ if (csoff > 0x3f) ++ return -1; ++ ++ l = cson; ++ l |= csoff << 4; ++ l |= weon << 10; ++ l |= weoff << 14; ++ l |= reon << 20; ++ l |= reoff << 24; ++ ++ t->tim[0] = l; ++ ++ actim = ps_to_rfbi_ticks(t->access_time, div); ++ if (actim <= reon) ++ actim = reon + 1; ++ if (actim > 0x3f) ++ return -1; ++ ++ wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div); ++ if (wecyc < weoff) ++ wecyc = weoff; ++ if (wecyc > 0x3f) ++ return -1; ++ ++ recyc = ps_to_rfbi_ticks(t->re_cycle_time, div); ++ if (recyc < reoff) ++ recyc = reoff; ++ if (recyc > 0x3f) ++ return -1; ++ ++ cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div); ++ if (cs_pulse > 0x3f) ++ return -1; ++ ++ l = wecyc; ++ l |= recyc << 6; ++ l |= cs_pulse << 12; ++ l |= actim << 22; ++ ++ t->tim[1] = l; ++ ++ t->tim[2] = div - 1; ++ ++ t->converted = 1; ++ ++ return 0; ++} ++ ++/* xxx FIX module selection missing */ ++int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, ++ unsigned hs_pulse_time, unsigned vs_pulse_time, ++ int hs_pol_inv, int vs_pol_inv, int extif_div) ++{ ++ int hs, vs; ++ int min; ++ u32 l; ++ ++ hs = ps_to_rfbi_ticks(hs_pulse_time, 1); ++ vs = ps_to_rfbi_ticks(vs_pulse_time, 1); ++ if (hs < 2) ++ return -EDOM; ++ if (mode == OMAP_DSS_RFBI_TE_MODE_2) ++ min = 2; ++ else /* OMAP_DSS_RFBI_TE_MODE_1 */ ++ min = 4; ++ if (vs < min) ++ return -EDOM; ++ if (vs == hs) ++ return -EINVAL; ++ rfbi.te_mode = mode; ++ DSSDBG("setup_te: mode %d hs %d vs %d hs_inv %d vs_inv %d\n", ++ mode, hs, vs, hs_pol_inv, vs_pol_inv); ++ ++ rfbi_enable_clocks(1); ++ rfbi_write_reg(RFBI_HSYNC_WIDTH, hs); ++ rfbi_write_reg(RFBI_VSYNC_WIDTH, vs); ++ ++ l = rfbi_read_reg(RFBI_CONFIG(0)); ++ if (hs_pol_inv) ++ l &= ~(1 << 21); ++ else ++ l |= 1 << 21; ++ if (vs_pol_inv) ++ l &= ~(1 << 20); ++ else ++ l |= 1 << 20; ++ rfbi_enable_clocks(0); ++ ++ return 0; ++} ++EXPORT_SYMBOL(omap_rfbi_setup_te); ++ ++/* xxx FIX module selection missing */ ++int omap_rfbi_enable_te(bool enable, unsigned line) ++{ ++ u32 l; ++ ++ DSSDBG("te %d line %d mode %d\n", enable, line, rfbi.te_mode); ++ if (line > (1 << 11) - 1) ++ return -EINVAL; ++ ++ rfbi_enable_clocks(1); ++ l = rfbi_read_reg(RFBI_CONFIG(0)); ++ l &= ~(0x3 << 2); ++ if (enable) { ++ rfbi.te_enabled = 1; ++ l |= rfbi.te_mode << 2; ++ } else ++ rfbi.te_enabled = 0; ++ rfbi_write_reg(RFBI_CONFIG(0), l); ++ rfbi_write_reg(RFBI_LINE_NUMBER, line); ++ rfbi_enable_clocks(0); ++ ++ return 0; ++} ++EXPORT_SYMBOL(omap_rfbi_enable_te); ++ ++#if 0 ++static void rfbi_enable_config(int enable1, int enable2) ++{ ++ u32 l; ++ int cs = 0; ++ ++ if (enable1) ++ cs |= 1<<0; ++ if (enable2) ++ cs |= 1<<1; ++ ++ rfbi_enable_clocks(1); ++ ++ l = rfbi_read_reg(RFBI_CONTROL); ++ ++ l = FLD_MOD(l, cs, 3, 2); ++ l = FLD_MOD(l, 0, 1, 1); ++ ++ rfbi_write_reg(RFBI_CONTROL, l); ++ ++ ++ l = rfbi_read_reg(RFBI_CONFIG(0)); ++ l = FLD_MOD(l, 0, 3, 2); /* TRIGGERMODE: ITE */ ++ /*l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ ++ /*l |= FLD_VAL(0, 8, 7); */ /* L4FORMAT, 1pix/L4 */ ++ ++ l = FLD_MOD(l, 0, 16, 16); /* A0POLARITY */ ++ l = FLD_MOD(l, 1, 20, 20); /* TE_VSYNC_POLARITY */ ++ l = FLD_MOD(l, 1, 21, 21); /* HSYNCPOLARITY */ ++ ++ l = FLD_MOD(l, OMAP_DSS_RFBI_PARALLELMODE_8, 1, 0); ++ rfbi_write_reg(RFBI_CONFIG(0), l); ++ ++ rfbi_enable_clocks(0); ++} ++#endif ++ ++int rfbi_configure(int rfbi_module, int bpp, int lines) ++{ ++ u32 l; ++ int cycle1 = 0, cycle2 = 0, cycle3 = 0; ++ enum omap_rfbi_cycleformat cycleformat; ++ enum omap_rfbi_datatype datatype; ++ enum omap_rfbi_parallelmode parallelmode; ++ ++ switch (bpp) { ++ case 12: ++ datatype = OMAP_DSS_RFBI_DATATYPE_12; ++ break; ++ case 16: ++ datatype = OMAP_DSS_RFBI_DATATYPE_16; ++ break; ++ case 18: ++ datatype = OMAP_DSS_RFBI_DATATYPE_18; ++ break; ++ case 24: ++ datatype = OMAP_DSS_RFBI_DATATYPE_24; ++ break; ++ default: ++ BUG(); ++ return 1; ++ } ++ rfbi.datatype = datatype; ++ ++ switch (lines) { ++ case 8: ++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_8; ++ break; ++ case 9: ++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_9; ++ break; ++ case 12: ++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_12; ++ break; ++ case 16: ++ parallelmode = OMAP_DSS_RFBI_PARALLELMODE_16; ++ break; ++ default: ++ BUG(); ++ return 1; ++ } ++ rfbi.parallelmode = parallelmode; ++ ++ if ((bpp % lines) == 0) { ++ switch (bpp / lines) { ++ case 1: ++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_1_1; ++ break; ++ case 2: ++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_2_1; ++ break; ++ case 3: ++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_1; ++ break; ++ default: ++ BUG(); ++ return 1; ++ } ++ } else if ((2 * bpp % lines) == 0) { ++ if ((2 * bpp / lines) == 3) ++ cycleformat = OMAP_DSS_RFBI_CYCLEFORMAT_3_2; ++ else { ++ BUG(); ++ return 1; ++ } ++ } else { ++ BUG(); ++ return 1; ++ } ++ ++ switch (cycleformat) { ++ case OMAP_DSS_RFBI_CYCLEFORMAT_1_1: ++ cycle1 = lines; ++ break; ++ ++ case OMAP_DSS_RFBI_CYCLEFORMAT_2_1: ++ cycle1 = lines; ++ cycle2 = lines; ++ break; ++ ++ case OMAP_DSS_RFBI_CYCLEFORMAT_3_1: ++ cycle1 = lines; ++ cycle2 = lines; ++ cycle3 = lines; ++ break; ++ ++ case OMAP_DSS_RFBI_CYCLEFORMAT_3_2: ++ cycle1 = lines; ++ cycle2 = (lines / 2) | ((lines / 2) << 16); ++ cycle3 = (lines << 16); ++ break; ++ } ++ ++ rfbi_enable_clocks(1); ++ ++ REG_FLD_MOD(RFBI_CONTROL, 0, 3, 2); /* clear CS */ ++ ++ l = 0; ++ l |= FLD_VAL(parallelmode, 1, 0); ++ l |= FLD_VAL(0, 3, 2); /* TRIGGERMODE: ITE */ ++ l |= FLD_VAL(0, 4, 4); /* TIMEGRANULARITY */ ++ l |= FLD_VAL(datatype, 6, 5); ++ /* l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ ++ l |= FLD_VAL(0, 8, 7); /* L4FORMAT, 1pix/L4 */ ++ l |= FLD_VAL(cycleformat, 10, 9); ++ l |= FLD_VAL(0, 12, 11); /* UNUSEDBITS */ ++ l |= FLD_VAL(0, 16, 16); /* A0POLARITY */ ++ l |= FLD_VAL(0, 17, 17); /* REPOLARITY */ ++ l |= FLD_VAL(0, 18, 18); /* WEPOLARITY */ ++ l |= FLD_VAL(0, 19, 19); /* CSPOLARITY */ ++ l |= FLD_VAL(1, 20, 20); /* TE_VSYNC_POLARITY */ ++ l |= FLD_VAL(1, 21, 21); /* HSYNCPOLARITY */ ++ rfbi_write_reg(RFBI_CONFIG(rfbi_module), l); ++ ++ rfbi_write_reg(RFBI_DATA_CYCLE1(rfbi_module), cycle1); ++ rfbi_write_reg(RFBI_DATA_CYCLE2(rfbi_module), cycle2); ++ rfbi_write_reg(RFBI_DATA_CYCLE3(rfbi_module), cycle3); ++ ++ ++ l = rfbi_read_reg(RFBI_CONTROL); ++ l = FLD_MOD(l, rfbi_module+1, 3, 2); /* Select CSx */ ++ l = FLD_MOD(l, 0, 1, 1); /* clear bypass */ ++ rfbi_write_reg(RFBI_CONTROL, l); ++ ++ ++ DSSDBG("RFBI config: bpp %d, lines %d, cycles: 0x%x 0x%x 0x%x\n", ++ bpp, lines, cycle1, cycle2, cycle3); ++ ++ rfbi_enable_clocks(0); ++ ++ return 0; ++} ++EXPORT_SYMBOL(rfbi_configure); ++ ++static int rfbi_find_display(struct omap_display *disp) ++{ ++ if (disp == rfbi.display[0]) ++ return 0; ++ ++ if (disp == rfbi.display[1]) ++ return 1; ++ ++ BUG(); ++ return -1; ++} ++ ++ ++static void signal_fifo_waiters(void) ++{ ++ if (atomic_read(&rfbi.cmd_fifo_full) > 0) { ++ /* DSSDBG("SIGNALING: Fifo not full for waiter!\n"); */ ++ complete(&rfbi.cmd_done); ++ atomic_dec(&rfbi.cmd_fifo_full); ++ } ++} ++ ++/* returns 1 for async op, and 0 for sync op */ ++static int do_update(struct omap_display *display, struct update_region *upd) ++{ ++ u16 x = upd->x; ++ u16 y = upd->y; ++ u16 w = upd->w; ++ u16 h = upd->h; ++ ++ perf_mark_setup(); ++ ++ if (display->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { ++ /*display->ctrl->enable_te(display, 1); */ ++ dispc_setup_partial_planes(display, &x, &y, &w, &h); ++ } ++ ++#ifdef MEASURE_PERF ++ rfbi.perf_bytes = w * h * 2; /* XXX always 16bit */ ++#endif ++ ++ display->ctrl->setup_update(display, x, y, w, h); ++ ++ if (display->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { ++ rfbi_transfer_area(w, h, NULL, NULL); ++ return 1; ++ } else { ++ struct omap_overlay *ovl; ++ void __iomem *addr; ++ int scr_width; ++ ++ ovl = display->manager->overlays[0]; ++ scr_width = ovl->info.screen_width; ++ addr = ovl->info.vaddr; ++ ++ omap_rfbi_write_pixels(addr, scr_width, x, y, w, h); ++ ++ perf_show("L4"); ++ ++ return 0; ++ } ++} ++ ++static void process_cmd_fifo(void) ++{ ++ int len; ++ struct update_param p; ++ struct omap_display *display; ++ unsigned long flags; ++ ++ if (atomic_inc_return(&rfbi.cmd_pending) != 1) ++ return; ++ ++ while (true) { ++ spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); ++ ++ len = __kfifo_get(rfbi.cmd_fifo, (unsigned char *)&p, ++ sizeof(struct update_param)); ++ if (len == 0) { ++ DSSDBG("nothing more in fifo\n"); ++ atomic_set(&rfbi.cmd_pending, 0); ++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); ++ break; ++ } ++ ++ /* DSSDBG("fifo full %d\n", rfbi.cmd_fifo_full.counter);*/ ++ ++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); ++ ++ BUG_ON(len != sizeof(struct update_param)); ++ BUG_ON(p.rfbi_module > 1); ++ ++ display = rfbi.display[p.rfbi_module]; ++ ++ if (p.cmd == RFBI_CMD_UPDATE) { ++ if (do_update(display, &p.par.r)) ++ break; /* async op */ ++ } else if (p.cmd == RFBI_CMD_SYNC) { ++ DSSDBG("Signaling SYNC done!\n"); ++ complete(p.par.sync); ++ } else ++ BUG(); ++ } ++ ++ signal_fifo_waiters(); ++} ++ ++static void rfbi_push_cmd(struct update_param *p) ++{ ++ int ret; ++ ++ while (1) { ++ unsigned long flags; ++ int available; ++ ++ spin_lock_irqsave(rfbi.cmd_fifo->lock, flags); ++ available = RFBI_CMD_FIFO_LEN_BYTES - ++ __kfifo_len(rfbi.cmd_fifo); ++ ++/* DSSDBG("%d bytes left in fifo\n", available); */ ++ if (available < sizeof(struct update_param)) { ++ DSSDBG("Going to wait because FIFO FULL..\n"); ++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); ++ atomic_inc(&rfbi.cmd_fifo_full); ++ wait_for_completion(&rfbi.cmd_done); ++ /*DSSDBG("Woke up because fifo not full anymore\n");*/ ++ continue; ++ } ++ ++ ret = __kfifo_put(rfbi.cmd_fifo, (unsigned char *)p, ++ sizeof(struct update_param)); ++/* DSSDBG("pushed %d bytes\n", ret);*/ ++ ++ spin_unlock_irqrestore(rfbi.cmd_fifo->lock, flags); ++ ++ BUG_ON(ret != sizeof(struct update_param)); ++ ++ break; ++ } ++} ++ ++static void rfbi_push_update(int rfbi_module, int x, int y, int w, int h) ++{ ++ struct update_param p; ++ ++ p.rfbi_module = rfbi_module; ++ p.cmd = RFBI_CMD_UPDATE; ++ ++ p.par.r.x = x; ++ p.par.r.y = y; ++ p.par.r.w = w; ++ p.par.r.h = h; ++ ++ DSSDBG("RFBI pushed %d,%d %dx%d\n", x, y, w, h); ++ ++ rfbi_push_cmd(&p); ++ ++ process_cmd_fifo(); ++} ++ ++static void rfbi_push_sync(int rfbi_module, struct completion *sync_comp) ++{ ++ struct update_param p; ++ ++ p.rfbi_module = rfbi_module; ++ p.cmd = RFBI_CMD_SYNC; ++ p.par.sync = sync_comp; ++ ++ rfbi_push_cmd(&p); ++ ++ DSSDBG("RFBI sync pushed to cmd fifo\n"); ++ ++ process_cmd_fifo(); ++} ++ ++void rfbi_dump_regs(struct seq_file *s) ++{ ++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r)) ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ DUMPREG(RFBI_REVISION); ++ DUMPREG(RFBI_SYSCONFIG); ++ DUMPREG(RFBI_SYSSTATUS); ++ DUMPREG(RFBI_CONTROL); ++ DUMPREG(RFBI_PIXEL_CNT); ++ DUMPREG(RFBI_LINE_NUMBER); ++ DUMPREG(RFBI_CMD); ++ DUMPREG(RFBI_PARAM); ++ DUMPREG(RFBI_DATA); ++ DUMPREG(RFBI_READ); ++ DUMPREG(RFBI_STATUS); ++ ++ DUMPREG(RFBI_CONFIG(0)); ++ DUMPREG(RFBI_ONOFF_TIME(0)); ++ DUMPREG(RFBI_CYCLE_TIME(0)); ++ DUMPREG(RFBI_DATA_CYCLE1(0)); ++ DUMPREG(RFBI_DATA_CYCLE2(0)); ++ DUMPREG(RFBI_DATA_CYCLE3(0)); ++ ++ DUMPREG(RFBI_CONFIG(1)); ++ DUMPREG(RFBI_ONOFF_TIME(1)); ++ DUMPREG(RFBI_CYCLE_TIME(1)); ++ DUMPREG(RFBI_DATA_CYCLE1(1)); ++ DUMPREG(RFBI_DATA_CYCLE2(1)); ++ DUMPREG(RFBI_DATA_CYCLE3(1)); ++ ++ DUMPREG(RFBI_VSYNC_WIDTH); ++ DUMPREG(RFBI_HSYNC_WIDTH); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++#undef DUMPREG ++} ++ ++int rfbi_init(void) ++{ ++ u32 rev; ++ u32 l; ++ ++ spin_lock_init(&rfbi.cmd_lock); ++ rfbi.cmd_fifo = kfifo_alloc(RFBI_CMD_FIFO_LEN_BYTES, GFP_KERNEL, ++ &rfbi.cmd_lock); ++ if (IS_ERR(rfbi.cmd_fifo)) ++ return -ENOMEM; ++ ++ init_completion(&rfbi.cmd_done); ++ atomic_set(&rfbi.cmd_fifo_full, 0); ++ atomic_set(&rfbi.cmd_pending, 0); ++ ++ rfbi.base = ioremap(RFBI_BASE, SZ_256); ++ if (!rfbi.base) { ++ DSSERR("can't ioremap RFBI\n"); ++ return -ENOMEM; ++ } ++ ++ rfbi_enable_clocks(1); ++ ++ msleep(10); ++ ++ rfbi.l4_khz = dss_clk_get_rate(DSS_CLK_ICK) / 1000; ++ ++ /* Enable autoidle and smart-idle */ ++ l = rfbi_read_reg(RFBI_SYSCONFIG); ++ l |= (1 << 0) | (2 << 3); ++ rfbi_write_reg(RFBI_SYSCONFIG, l); ++ ++ rev = rfbi_read_reg(RFBI_REVISION); ++ printk(KERN_INFO "OMAP RFBI rev %d.%d\n", ++ FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); ++ ++ rfbi_enable_clocks(0); ++ ++ return 0; ++} ++ ++void rfbi_exit(void) ++{ ++ DSSDBG("rfbi_exit\n"); ++ ++ kfifo_free(rfbi.cmd_fifo); ++ ++ iounmap(rfbi.base); ++} ++ ++/* struct omap_display support */ ++static int rfbi_display_update(struct omap_display *display, ++ u16 x, u16 y, u16 w, u16 h) ++{ ++ int rfbi_module; ++ ++ if (w == 0 || h == 0) ++ return 0; ++ ++ rfbi_module = rfbi_find_display(display); ++ ++ rfbi_push_update(rfbi_module, x, y, w, h); ++ ++ return 0; ++} ++ ++static int rfbi_display_sync(struct omap_display *display) ++{ ++ struct completion sync_comp; ++ int rfbi_module; ++ ++ rfbi_module = rfbi_find_display(display); ++ ++ init_completion(&sync_comp); ++ rfbi_push_sync(rfbi_module, &sync_comp); ++ DSSDBG("Waiting for SYNC to happen...\n"); ++ wait_for_completion(&sync_comp); ++ DSSDBG("Released from SYNC\n"); ++ return 0; ++} ++ ++static int rfbi_display_enable_te(struct omap_display *display, bool enable) ++{ ++ display->ctrl->enable_te(display, enable); ++ return 0; ++} ++ ++static int rfbi_display_enable(struct omap_display *display) ++{ ++ int r; ++ ++ BUG_ON(display->panel == NULL || display->ctrl == NULL); ++ ++ r = omap_dispc_register_isr(framedone_callback, NULL, ++ DISPC_IRQ_FRAMEDONE); ++ if (r) { ++ DSSERR("can't get FRAMEDONE irq\n"); ++ return r; ++ } ++ ++ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); ++ ++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_RFBI); ++ ++ dispc_set_tft_data_lines(display->ctrl->pixel_size); ++ ++ rfbi_configure(display->hw_config.u.rfbi.channel, ++ display->ctrl->pixel_size, ++ display->hw_config.u.rfbi.data_lines); ++ ++ rfbi_set_timings(display->hw_config.u.rfbi.channel, ++ &display->ctrl->timings); ++ ++ ++ if (display->ctrl && display->ctrl->enable) { ++ r = display->ctrl->enable(display); ++ if (r) ++ goto err; ++ } ++ ++ if (display->panel && display->panel->enable) { ++ r = display->panel->enable(display); ++ if (r) ++ goto err; ++ } ++ ++ return 0; ++err: ++ return -ENODEV; ++} ++ ++static void rfbi_display_disable(struct omap_display *display) ++{ ++ display->ctrl->disable(display); ++ omap_dispc_unregister_isr(framedone_callback, NULL, ++ DISPC_IRQ_FRAMEDONE); ++} ++ ++void rfbi_init_display(struct omap_display *display) ++{ ++ display->enable = rfbi_display_enable; ++ display->disable = rfbi_display_disable; ++ display->update = rfbi_display_update; ++ display->sync = rfbi_display_sync; ++ display->enable_te = rfbi_display_enable_te; ++ ++ rfbi.display[display->hw_config.u.rfbi.channel] = display; ++ ++ display->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE; ++} +diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c +new file mode 100644 +index 0000000..fbff2b2 +--- /dev/null ++++ b/drivers/video/omap2/dss/sdi.c +@@ -0,0 +1,245 @@ ++/* ++ * linux/drivers/video/omap2/dss/sdi.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "SDI" ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include "dss.h" ++ ++ ++static struct { ++ bool skip_init; ++ bool update_enabled; ++} sdi; ++ ++static void sdi_basic_init(void) ++{ ++ dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); ++ ++ dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); ++ dispc_set_tft_data_lines(24); ++ dispc_lcd_enable_signal_polarity(1); ++} ++ ++static int sdi_display_enable(struct omap_display *display) ++{ ++ struct dispc_clock_info cinfo; ++ u16 lck_div, pck_div; ++ unsigned long fck; ++ struct omap_panel *panel = display->panel; ++ unsigned long pck; ++ int r; ++ ++ if (display->state != OMAP_DSS_DISPLAY_DISABLED) { ++ DSSERR("display already enabled\n"); ++ return -EINVAL; ++ } ++ ++ /* In case of skip_init sdi_init has already enabled the clocks */ ++ if (!sdi.skip_init) ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ sdi_basic_init(); ++ ++ /* 15.5.9.1.2 */ ++ panel->config |= OMAP_DSS_LCD_RF | OMAP_DSS_LCD_ONOFF; ++ ++ dispc_set_pol_freq(panel); ++ ++ if (!sdi.skip_init) ++ r = dispc_calc_clock_div(1, panel->timings.pixel_clock * 1000, ++ &cinfo); ++ else ++ r = dispc_get_clock_div(&cinfo); ++ ++ if (r) ++ goto err0; ++ ++ fck = cinfo.fck; ++ lck_div = cinfo.lck_div; ++ pck_div = cinfo.pck_div; ++ ++ pck = fck / lck_div / pck_div / 1000; ++ ++ if (pck != panel->timings.pixel_clock) { ++ DSSWARN("Could not find exact pixel clock. Requested %d kHz, " ++ "got %lu kHz\n", ++ panel->timings.pixel_clock, pck); ++ ++ panel->timings.pixel_clock = pck; ++ } ++ ++ ++ dispc_set_lcd_timings(&panel->timings); ++ ++ r = dispc_set_clock_div(&cinfo); ++ if (r) ++ goto err1; ++ ++ if (!sdi.skip_init) { ++ dss_sdi_init(display->hw_config.u.sdi.datapairs); ++ dss_sdi_enable(); ++ mdelay(2); ++ } ++ ++ dispc_enable_lcd_out(1); ++ ++ r = panel->enable(display); ++ if (r) ++ goto err2; ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ sdi.skip_init = 0; ++ ++ return 0; ++err2: ++ dispc_enable_lcd_out(0); ++err1: ++err0: ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ return r; ++} ++ ++static int sdi_display_resume(struct omap_display *display); ++ ++static void sdi_display_disable(struct omap_display *display) ++{ ++ if (display->state == OMAP_DSS_DISPLAY_DISABLED) ++ return; ++ ++ if (display->state == OMAP_DSS_DISPLAY_SUSPENDED) ++ sdi_display_resume(display); ++ ++ display->panel->disable(display); ++ ++ dispc_enable_lcd_out(0); ++ ++ dss_sdi_disable(); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ display->state = OMAP_DSS_DISPLAY_DISABLED; ++} ++ ++static int sdi_display_suspend(struct omap_display *display) ++{ ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) ++ return -EINVAL; ++ ++ if (display->panel->suspend) ++ display->panel->suspend(display); ++ ++ dispc_enable_lcd_out(0); ++ ++ dss_sdi_disable(); ++ ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ display->state = OMAP_DSS_DISPLAY_SUSPENDED; ++ ++ return 0; ++} ++ ++static int sdi_display_resume(struct omap_display *display) ++{ ++ if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) ++ return -EINVAL; ++ ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ ++ dss_sdi_enable(); ++ mdelay(2); ++ ++ dispc_enable_lcd_out(1); ++ ++ if (display->panel->resume) ++ display->panel->resume(display); ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++ ++ return 0; ++} ++ ++static int sdi_display_set_update_mode(struct omap_display *display, ++ enum omap_dss_update_mode mode) ++{ ++ if (mode == OMAP_DSS_UPDATE_MANUAL) ++ return -EINVAL; ++ ++ if (mode == OMAP_DSS_UPDATE_DISABLED) { ++ dispc_enable_lcd_out(0); ++ sdi.update_enabled = 0; ++ } else { ++ dispc_enable_lcd_out(1); ++ sdi.update_enabled = 1; ++ } ++ ++ return 0; ++} ++ ++static enum omap_dss_update_mode sdi_display_get_update_mode( ++ struct omap_display *display) ++{ ++ return sdi.update_enabled ? OMAP_DSS_UPDATE_AUTO : ++ OMAP_DSS_UPDATE_DISABLED; ++} ++ ++static void sdi_get_timings(struct omap_display *display, ++ struct omap_video_timings *timings) ++{ ++ *timings = display->panel->timings; ++} ++ ++void sdi_init_display(struct omap_display *display) ++{ ++ DSSDBG("SDI init\n"); ++ ++ display->enable = sdi_display_enable; ++ display->disable = sdi_display_disable; ++ display->suspend = sdi_display_suspend; ++ display->resume = sdi_display_resume; ++ display->set_update_mode = sdi_display_set_update_mode; ++ display->get_update_mode = sdi_display_get_update_mode; ++ display->get_timings = sdi_get_timings; ++} ++ ++int sdi_init(bool skip_init) ++{ ++ /* we store this for first display enable, then clear it */ ++ sdi.skip_init = skip_init; ++ ++ /* ++ * Enable clocks already here, otherwise there would be a toggle ++ * of them until sdi_display_enable is called. ++ */ ++ if (skip_init) ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); ++ return 0; ++} ++ ++void sdi_exit(void) ++{ ++} +diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c +new file mode 100644 +index 0000000..aceed9f +--- /dev/null ++++ b/drivers/video/omap2/dss/venc.c +@@ -0,0 +1,600 @@ ++/* ++ * linux/drivers/video/omap2/dss/venc.c ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * VENC settings from TI's DSS driver ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#define DSS_SUBSYS_NAME "VENC" ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "dss.h" ++ ++#define VENC_BASE 0x48050C00 ++ ++/* Venc registers */ ++#define VENC_REV_ID 0x00 ++#define VENC_STATUS 0x04 ++#define VENC_F_CONTROL 0x08 ++#define VENC_VIDOUT_CTRL 0x10 ++#define VENC_SYNC_CTRL 0x14 ++#define VENC_LLEN 0x1C ++#define VENC_FLENS 0x20 ++#define VENC_HFLTR_CTRL 0x24 ++#define VENC_CC_CARR_WSS_CARR 0x28 ++#define VENC_C_PHASE 0x2C ++#define VENC_GAIN_U 0x30 ++#define VENC_GAIN_V 0x34 ++#define VENC_GAIN_Y 0x38 ++#define VENC_BLACK_LEVEL 0x3C ++#define VENC_BLANK_LEVEL 0x40 ++#define VENC_X_COLOR 0x44 ++#define VENC_M_CONTROL 0x48 ++#define VENC_BSTAMP_WSS_DATA 0x4C ++#define VENC_S_CARR 0x50 ++#define VENC_LINE21 0x54 ++#define VENC_LN_SEL 0x58 ++#define VENC_L21__WC_CTL 0x5C ++#define VENC_HTRIGGER_VTRIGGER 0x60 ++#define VENC_SAVID__EAVID 0x64 ++#define VENC_FLEN__FAL 0x68 ++#define VENC_LAL__PHASE_RESET 0x6C ++#define VENC_HS_INT_START_STOP_X 0x70 ++#define VENC_HS_EXT_START_STOP_X 0x74 ++#define VENC_VS_INT_START_X 0x78 ++#define VENC_VS_INT_STOP_X__VS_INT_START_Y 0x7C ++#define VENC_VS_INT_STOP_Y__VS_EXT_START_X 0x80 ++#define VENC_VS_EXT_STOP_X__VS_EXT_START_Y 0x84 ++#define VENC_VS_EXT_STOP_Y 0x88 ++#define VENC_AVID_START_STOP_X 0x90 ++#define VENC_AVID_START_STOP_Y 0x94 ++#define VENC_FID_INT_START_X__FID_INT_START_Y 0xA0 ++#define VENC_FID_INT_OFFSET_Y__FID_EXT_START_X 0xA4 ++#define VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y 0xA8 ++#define VENC_TVDETGP_INT_START_STOP_X 0xB0 ++#define VENC_TVDETGP_INT_START_STOP_Y 0xB4 ++#define VENC_GEN_CTRL 0xB8 ++#define VENC_OUTPUT_CONTROL 0xC4 ++#define VENC_DAC_B__DAC_C 0xC8 ++ ++struct venc_config { ++ u32 f_control; ++ u32 vidout_ctrl; ++ u32 sync_ctrl; ++ u32 llen; ++ u32 flens; ++ u32 hfltr_ctrl; ++ u32 cc_carr_wss_carr; ++ u32 c_phase; ++ u32 gain_u; ++ u32 gain_v; ++ u32 gain_y; ++ u32 black_level; ++ u32 blank_level; ++ u32 x_color; ++ u32 m_control; ++ u32 bstamp_wss_data; ++ u32 s_carr; ++ u32 line21; ++ u32 ln_sel; ++ u32 l21__wc_ctl; ++ u32 htrigger_vtrigger; ++ u32 savid__eavid; ++ u32 flen__fal; ++ u32 lal__phase_reset; ++ u32 hs_int_start_stop_x; ++ u32 hs_ext_start_stop_x; ++ u32 vs_int_start_x; ++ u32 vs_int_stop_x__vs_int_start_y; ++ u32 vs_int_stop_y__vs_ext_start_x; ++ u32 vs_ext_stop_x__vs_ext_start_y; ++ u32 vs_ext_stop_y; ++ u32 avid_start_stop_x; ++ u32 avid_start_stop_y; ++ u32 fid_int_start_x__fid_int_start_y; ++ u32 fid_int_offset_y__fid_ext_start_x; ++ u32 fid_ext_start_y__fid_ext_offset_y; ++ u32 tvdetgp_int_start_stop_x; ++ u32 tvdetgp_int_start_stop_y; ++ u32 gen_ctrl; ++}; ++ ++/* from TRM */ ++static const struct venc_config venc_config_pal_trm = { ++ .f_control = 0, ++ .vidout_ctrl = 1, ++ .sync_ctrl = 0x40, ++ .llen = 0x35F, /* 863 */ ++ .flens = 0x270, /* 624 */ ++ .hfltr_ctrl = 0, ++ .cc_carr_wss_carr = 0x2F7225ED, ++ .c_phase = 0, ++ .gain_u = 0x111, ++ .gain_v = 0x181, ++ .gain_y = 0x140, ++ .black_level = 0x3B, ++ .blank_level = 0x3B, ++ .x_color = 0x7, ++ .m_control = 0x2, ++ .bstamp_wss_data = 0x3F, ++ .s_carr = 0x2A098ACB, ++ .line21 = 0, ++ .ln_sel = 0x01290015, ++ .l21__wc_ctl = 0x0000F603, ++ .htrigger_vtrigger = 0, ++ ++ .savid__eavid = 0x06A70108, ++ .flen__fal = 0x00180270, ++ .lal__phase_reset = 0x00040135, ++ .hs_int_start_stop_x = 0x00880358, ++ .hs_ext_start_stop_x = 0x000F035F, ++ .vs_int_start_x = 0x01A70000, ++ .vs_int_stop_x__vs_int_start_y = 0x000001A7, ++ .vs_int_stop_y__vs_ext_start_x = 0x01AF0000, ++ .vs_ext_stop_x__vs_ext_start_y = 0x000101AF, ++ .vs_ext_stop_y = 0x00000025, ++ .avid_start_stop_x = 0x03530083, ++ .avid_start_stop_y = 0x026C002E, ++ .fid_int_start_x__fid_int_start_y = 0x0001008A, ++ .fid_int_offset_y__fid_ext_start_x = 0x002E0138, ++ .fid_ext_start_y__fid_ext_offset_y = 0x01380001, ++ ++ .tvdetgp_int_start_stop_x = 0x00140001, ++ .tvdetgp_int_start_stop_y = 0x00010001, ++ .gen_ctrl = 0x00FF0000, ++}; ++ ++/* from TRM */ ++static const struct venc_config venc_config_ntsc_trm = { ++ .f_control = 0, ++ .vidout_ctrl = 1, ++ .sync_ctrl = 0x8040, ++ .llen = 0x359, ++ .flens = 0x20C, ++ .hfltr_ctrl = 0, ++ .cc_carr_wss_carr = 0x043F2631, ++ .c_phase = 0, ++ .gain_u = 0x102, ++ .gain_v = 0x16C, ++ .gain_y = 0x12F, ++ .black_level = 0x43, ++ .blank_level = 0x38, ++ .x_color = 0x7, ++ .m_control = 0x1, ++ .bstamp_wss_data = 0x38, ++ .s_carr = 0x21F07C1F, ++ .line21 = 0, ++ .ln_sel = 0x01310011, ++ .l21__wc_ctl = 0x0000F003, ++ .htrigger_vtrigger = 0, ++ ++ .savid__eavid = 0x069300F4, ++ .flen__fal = 0x0016020C, ++ .lal__phase_reset = 0x00060107, ++ .hs_int_start_stop_x = 0x008E0350, ++ .hs_ext_start_stop_x = 0x000F0359, ++ .vs_int_start_x = 0x01A00000, ++ .vs_int_stop_x__vs_int_start_y = 0x020701A0, ++ .vs_int_stop_y__vs_ext_start_x = 0x01AC0024, ++ .vs_ext_stop_x__vs_ext_start_y = 0x020D01AC, ++ .vs_ext_stop_y = 0x00000006, ++ .avid_start_stop_x = 0x03480078, ++ .avid_start_stop_y = 0x02060024, ++ .fid_int_start_x__fid_int_start_y = 0x0001008A, ++ .fid_int_offset_y__fid_ext_start_x = 0x01AC0106, ++ .fid_ext_start_y__fid_ext_offset_y = 0x01060006, ++ ++ .tvdetgp_int_start_stop_x = 0x00140001, ++ .tvdetgp_int_start_stop_y = 0x00010001, ++ .gen_ctrl = 0x00F90000, ++}; ++ ++static const struct venc_config venc_config_pal_bdghi = { ++ .f_control = 0, ++ .vidout_ctrl = 0, ++ .sync_ctrl = 0, ++ .hfltr_ctrl = 0, ++ .x_color = 0, ++ .line21 = 0, ++ .ln_sel = 21, ++ .htrigger_vtrigger = 0, ++ .tvdetgp_int_start_stop_x = 0x00140001, ++ .tvdetgp_int_start_stop_y = 0x00010001, ++ .gen_ctrl = 0x00FB0000, ++ ++ .llen = 864-1, ++ .flens = 625-1, ++ .cc_carr_wss_carr = 0x2F7625ED, ++ .c_phase = 0xDF, ++ .gain_u = 0x111, ++ .gain_v = 0x181, ++ .gain_y = 0x140, ++ .black_level = 0x3e, ++ .blank_level = 0x3e, ++ .m_control = 0<<2 | 1<<1, ++ .bstamp_wss_data = 0x42, ++ .s_carr = 0x2a098acb, ++ .l21__wc_ctl = 0<<13 | 0x16<<8 | 0<<0, ++ .savid__eavid = 0x06A70108, ++ .flen__fal = 23<<16 | 624<<0, ++ .lal__phase_reset = 2<<17 | 310<<0, ++ .hs_int_start_stop_x = 0x00920358, ++ .hs_ext_start_stop_x = 0x000F035F, ++ .vs_int_start_x = 0x1a7<<16, ++ .vs_int_stop_x__vs_int_start_y = 0x000601A7, ++ .vs_int_stop_y__vs_ext_start_x = 0x01AF0036, ++ .vs_ext_stop_x__vs_ext_start_y = 0x27101af, ++ .vs_ext_stop_y = 0x05, ++ .avid_start_stop_x = 0x03530082, ++ .avid_start_stop_y = 0x0270002E, ++ .fid_int_start_x__fid_int_start_y = 0x0005008A, ++ .fid_int_offset_y__fid_ext_start_x = 0x002E0138, ++ .fid_ext_start_y__fid_ext_offset_y = 0x01380005, ++}; ++ ++const struct omap_video_timings omap_dss_pal_timings = { ++ .x_res = 720, ++ .y_res = 574, ++ .pixel_clock = 26181, ++ .hsw = 32, ++ .hfp = 80, ++ .hbp = 48, ++ .vsw = 7, ++ .vfp = 3, ++ .vbp = 6, ++}; ++EXPORT_SYMBOL(omap_dss_pal_timings); ++ ++const struct omap_video_timings omap_dss_ntsc_timings = { ++ .x_res = 720, ++ .y_res = 482, ++ .pixel_clock = 22153, ++ .hsw = 32, ++ .hfp = 80, ++ .hbp = 48, ++ .vsw = 10, ++ .vfp = 3, ++ .vbp = 6, ++}; ++EXPORT_SYMBOL(omap_dss_ntsc_timings); ++ ++static struct { ++ void __iomem *base; ++ struct mutex venc_lock; ++} venc; ++ ++static struct omap_panel venc_panel = { ++ .name = "tv-out", ++}; ++ ++static inline void venc_write_reg(int idx, u32 val) ++{ ++ __raw_writel(val, venc.base + idx); ++} ++ ++static inline u32 venc_read_reg(int idx) ++{ ++ u32 l = __raw_readl(venc.base + idx); ++ return l; ++} ++ ++static void venc_write_config(const struct venc_config *config) ++{ ++ DSSDBG("write venc conf\n"); ++ ++ venc_write_reg(VENC_LLEN, config->llen); ++ venc_write_reg(VENC_FLENS, config->flens); ++ venc_write_reg(VENC_CC_CARR_WSS_CARR, config->cc_carr_wss_carr); ++ venc_write_reg(VENC_C_PHASE, config->c_phase); ++ venc_write_reg(VENC_GAIN_U, config->gain_u); ++ venc_write_reg(VENC_GAIN_V, config->gain_v); ++ venc_write_reg(VENC_GAIN_Y, config->gain_y); ++ venc_write_reg(VENC_BLACK_LEVEL, config->black_level); ++ venc_write_reg(VENC_BLANK_LEVEL, config->blank_level); ++ venc_write_reg(VENC_M_CONTROL, config->m_control); ++ venc_write_reg(VENC_BSTAMP_WSS_DATA, config->bstamp_wss_data); ++ venc_write_reg(VENC_S_CARR, config->s_carr); ++ venc_write_reg(VENC_L21__WC_CTL, config->l21__wc_ctl); ++ venc_write_reg(VENC_SAVID__EAVID, config->savid__eavid); ++ venc_write_reg(VENC_FLEN__FAL, config->flen__fal); ++ venc_write_reg(VENC_LAL__PHASE_RESET, config->lal__phase_reset); ++ venc_write_reg(VENC_HS_INT_START_STOP_X, config->hs_int_start_stop_x); ++ venc_write_reg(VENC_HS_EXT_START_STOP_X, config->hs_ext_start_stop_x); ++ venc_write_reg(VENC_VS_INT_START_X, config->vs_int_start_x); ++ venc_write_reg(VENC_VS_INT_STOP_X__VS_INT_START_Y, ++ config->vs_int_stop_x__vs_int_start_y); ++ venc_write_reg(VENC_VS_INT_STOP_Y__VS_EXT_START_X, ++ config->vs_int_stop_y__vs_ext_start_x); ++ venc_write_reg(VENC_VS_EXT_STOP_X__VS_EXT_START_Y, ++ config->vs_ext_stop_x__vs_ext_start_y); ++ venc_write_reg(VENC_VS_EXT_STOP_Y, config->vs_ext_stop_y); ++ venc_write_reg(VENC_AVID_START_STOP_X, config->avid_start_stop_x); ++ venc_write_reg(VENC_AVID_START_STOP_Y, config->avid_start_stop_y); ++ venc_write_reg(VENC_FID_INT_START_X__FID_INT_START_Y, ++ config->fid_int_start_x__fid_int_start_y); ++ venc_write_reg(VENC_FID_INT_OFFSET_Y__FID_EXT_START_X, ++ config->fid_int_offset_y__fid_ext_start_x); ++ venc_write_reg(VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y, ++ config->fid_ext_start_y__fid_ext_offset_y); ++ ++ venc_write_reg(VENC_DAC_B__DAC_C, venc_read_reg(VENC_DAC_B__DAC_C)); ++ venc_write_reg(VENC_VIDOUT_CTRL, config->vidout_ctrl); ++ venc_write_reg(VENC_HFLTR_CTRL, config->hfltr_ctrl); ++ venc_write_reg(VENC_X_COLOR, config->x_color); ++ venc_write_reg(VENC_LINE21, config->line21); ++ venc_write_reg(VENC_LN_SEL, config->ln_sel); ++ venc_write_reg(VENC_HTRIGGER_VTRIGGER, config->htrigger_vtrigger); ++ venc_write_reg(VENC_TVDETGP_INT_START_STOP_X, ++ config->tvdetgp_int_start_stop_x); ++ venc_write_reg(VENC_TVDETGP_INT_START_STOP_Y, ++ config->tvdetgp_int_start_stop_y); ++ venc_write_reg(VENC_GEN_CTRL, config->gen_ctrl); ++ venc_write_reg(VENC_F_CONTROL, config->f_control); ++ venc_write_reg(VENC_SYNC_CTRL, config->sync_ctrl); ++} ++ ++static void venc_reset(void) ++{ ++ int t = 1000; ++ ++ venc_write_reg(VENC_F_CONTROL, 1<<8); ++ while (venc_read_reg(VENC_F_CONTROL) & (1<<8)) { ++ if (--t == 0) { ++ DSSERR("Failed to reset venc\n"); ++ return; ++ } ++ } ++ ++ /* the magical sleep that makes things work */ ++ msleep(20); ++} ++ ++static void venc_enable_clocks(int enable) ++{ ++ if (enable) ++ dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M | ++ DSS_CLK_96M); ++ else ++ dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_54M | ++ DSS_CLK_96M); ++} ++ ++static const struct venc_config *venc_timings_to_config( ++ struct omap_video_timings *timings) ++{ ++ if (memcmp(&omap_dss_pal_timings, timings, sizeof(*timings)) == 0) ++ return &venc_config_pal_trm; ++ ++ if (memcmp(&omap_dss_ntsc_timings, timings, sizeof(*timings)) == 0) ++ return &venc_config_ntsc_trm; ++ ++ BUG(); ++} ++ ++int venc_init(void) ++{ ++ u8 rev_id; ++ ++ mutex_init(&venc.venc_lock); ++ ++ venc_panel.timings = omap_dss_pal_timings; ++ ++ venc.base = ioremap(VENC_BASE, SZ_1K); ++ if (!venc.base) { ++ DSSERR("can't ioremap VENC\n"); ++ return -ENOMEM; ++ } ++ ++ venc_enable_clocks(1); ++ ++ rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff); ++ printk(KERN_INFO "OMAP VENC rev %d\n", rev_id); ++ ++ venc_enable_clocks(0); ++ ++ return 0; ++} ++ ++void venc_exit(void) ++{ ++ iounmap(venc.base); ++} ++ ++static void venc_power_on(struct omap_display *display) ++{ ++ venc_enable_clocks(1); ++ ++ venc_reset(); ++ venc_write_config(venc_timings_to_config(&display->panel->timings)); ++ ++ dss_set_venc_output(display->hw_config.u.venc.type); ++ dss_set_dac_pwrdn_bgz(1); ++ ++ if (display->hw_config.u.venc.type == OMAP_DSS_VENC_TYPE_COMPOSITE) { ++ if (cpu_is_omap24xx()) ++ venc_write_reg(VENC_OUTPUT_CONTROL, 0x2); ++ else ++ venc_write_reg(VENC_OUTPUT_CONTROL, 0xa); ++ } else { /* S-Video */ ++ venc_write_reg(VENC_OUTPUT_CONTROL, 0xd); ++ } ++ ++ dispc_set_digit_size(display->panel->timings.x_res, ++ display->panel->timings.y_res/2); ++ ++ if (display->hw_config.panel_enable) ++ display->hw_config.panel_enable(display); ++ ++ dispc_enable_digit_out(1); ++} ++ ++static void venc_power_off(struct omap_display *display) ++{ ++ venc_write_reg(VENC_OUTPUT_CONTROL, 0); ++ dss_set_dac_pwrdn_bgz(0); ++ ++ dispc_enable_digit_out(0); ++ ++ if (display->hw_config.panel_disable) ++ display->hw_config.panel_disable(display); ++ ++ venc_enable_clocks(0); ++} ++ ++static int venc_enable_display(struct omap_display *display) ++{ ++ int r = 0; ++ ++ DSSDBG("venc_enable_display\n"); ++ ++ mutex_lock(&venc.venc_lock); ++ ++ if (display->state != OMAP_DSS_DISPLAY_DISABLED) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ venc_power_on(display); ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++err: ++ mutex_unlock(&venc.venc_lock); ++ ++ return r; ++} ++ ++static void venc_disable_display(struct omap_display *display) ++{ ++ DSSDBG("venc_disable_display\n"); ++ ++ mutex_lock(&venc.venc_lock); ++ ++ if (display->state == OMAP_DSS_DISPLAY_DISABLED) ++ goto end; ++ ++ if (display->state == OMAP_DSS_DISPLAY_SUSPENDED) { ++ /* suspended is the same as disabled with venc */ ++ display->state = OMAP_DSS_DISPLAY_DISABLED; ++ goto end; ++ } ++ ++ venc_power_off(display); ++ ++ display->state = OMAP_DSS_DISPLAY_DISABLED; ++end: ++ mutex_unlock(&venc.venc_lock); ++} ++ ++static int venc_display_suspend(struct omap_display *display) ++{ ++ int r = 0; ++ ++ DSSDBG("venc_display_suspend\n"); ++ ++ mutex_lock(&venc.venc_lock); ++ ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ venc_power_off(display); ++ ++ display->state = OMAP_DSS_DISPLAY_SUSPENDED; ++err: ++ mutex_unlock(&venc.venc_lock); ++ ++ return r; ++} ++ ++static int venc_display_resume(struct omap_display *display) ++{ ++ int r = 0; ++ ++ DSSDBG("venc_display_resume\n"); ++ ++ mutex_lock(&venc.venc_lock); ++ ++ if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ venc_power_on(display); ++ ++ display->state = OMAP_DSS_DISPLAY_ACTIVE; ++err: ++ mutex_unlock(&venc.venc_lock); ++ ++ return r; ++} ++ ++static void venc_get_timings(struct omap_display *display, ++ struct omap_video_timings *timings) ++{ ++ *timings = venc_panel.timings; ++} ++ ++static void venc_set_timings(struct omap_display *display, ++ struct omap_video_timings *timings) ++{ ++ DSSDBG("venc_set_timings\n"); ++ display->panel->timings = *timings; ++ if (display->state == OMAP_DSS_DISPLAY_ACTIVE) { ++ /* turn the venc off and on to get new timings to use */ ++ venc_disable_display(display); ++ venc_enable_display(display); ++ } ++} ++ ++static int venc_check_timings(struct omap_display *display, ++ struct omap_video_timings *timings) ++{ ++ DSSDBG("venc_check_timings\n"); ++ ++ if (memcmp(&omap_dss_pal_timings, timings, sizeof(*timings)) == 0) ++ return 0; ++ ++ if (memcmp(&omap_dss_ntsc_timings, timings, sizeof(*timings)) == 0) ++ return 0; ++ ++ return -EINVAL; ++} ++ ++void venc_init_display(struct omap_display *display) ++{ ++ display->panel = &venc_panel; ++ display->enable = venc_enable_display; ++ display->disable = venc_disable_display; ++ display->suspend = venc_display_suspend; ++ display->resume = venc_display_resume; ++ display->get_timings = venc_get_timings; ++ display->set_timings = venc_set_timings; ++ display->check_timings = venc_check_timings; ++} +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0004-DSS2-OMAP-framebuffer-driver.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0004-DSS2-OMAP-framebuffer-driver.patch new file mode 100644 index 000000000..09afa7e5b --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0004-DSS2-OMAP-framebuffer-driver.patch @@ -0,0 +1,3403 @@ +From db9314f01a207e256d545244d3d00dc4ce535280 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Thu, 2 Apr 2009 10:25:48 +0300 +Subject: [PATCH] DSS2: OMAP framebuffer driver + +Signed-off-by: Tomi Valkeinen +--- + arch/arm/plat-omap/fb.c | 28 + + drivers/video/omap/Kconfig | 5 +- + drivers/video/omap2/omapfb/Kconfig | 35 + + drivers/video/omap2/omapfb/Makefile | 2 + + drivers/video/omap2/omapfb/omapfb-ioctl.c | 656 ++++++++++ + drivers/video/omap2/omapfb/omapfb-main.c | 2010 +++++++++++++++++++++++++++++ + drivers/video/omap2/omapfb/omapfb-sysfs.c | 371 ++++++ + drivers/video/omap2/omapfb/omapfb.h | 153 +++ + include/linux/omapfb.h | 20 + + 9 files changed, 3278 insertions(+), 2 deletions(-) + create mode 100644 drivers/video/omap2/omapfb/Kconfig + create mode 100644 drivers/video/omap2/omapfb/Makefile + create mode 100644 drivers/video/omap2/omapfb/omapfb-ioctl.c + create mode 100644 drivers/video/omap2/omapfb/omapfb-main.c + create mode 100644 drivers/video/omap2/omapfb/omapfb-sysfs.c + create mode 100644 drivers/video/omap2/omapfb/omapfb.h + +diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c +index 40615a6..1dc3415 100644 +--- a/arch/arm/plat-omap/fb.c ++++ b/arch/arm/plat-omap/fb.c +@@ -327,6 +327,34 @@ static inline int omap_init_fb(void) + + arch_initcall(omap_init_fb); + ++#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) ++ ++static u64 omap_fb_dma_mask = ~(u32)0; ++static struct omapfb_platform_data omapfb_config; ++ ++static struct platform_device omap_fb_device = { ++ .name = "omapfb", ++ .id = -1, ++ .dev = { ++ .dma_mask = &omap_fb_dma_mask, ++ .coherent_dma_mask = ~(u32)0, ++ .platform_data = &omapfb_config, ++ }, ++ .num_resources = 0, ++}; ++ ++void omapfb_set_platform_data(struct omapfb_platform_data *data) ++{ ++ omapfb_config = *data; ++} ++ ++static inline int omap_init_fb(void) ++{ ++ return platform_device_register(&omap_fb_device); ++} ++ ++arch_initcall(omap_init_fb); ++ + #else + + void omapfb_reserve_sdram(void) {} +diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig +index c355b59..a1c10de 100644 +--- a/drivers/video/omap/Kconfig ++++ b/drivers/video/omap/Kconfig +@@ -1,6 +1,7 @@ + config FB_OMAP + tristate "OMAP frame buffer support (EXPERIMENTAL)" +- depends on FB && ARCH_OMAP ++ depends on FB && ARCH_OMAP && (OMAP2_DSS = "n") ++ + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT +@@ -72,7 +73,7 @@ config FB_OMAP_LCD_MIPID + + config FB_OMAP_BOOTLOADER_INIT + bool "Check bootloader initialization" +- depends on FB_OMAP ++ depends on FB_OMAP || FB_OMAP2 + help + Say Y here if you want to enable checking if the bootloader has + already initialized the display controller. In this case the +diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/omap2/omapfb/Kconfig +new file mode 100644 +index 0000000..4f66033 +--- /dev/null ++++ b/drivers/video/omap2/omapfb/Kconfig +@@ -0,0 +1,35 @@ ++menuconfig FB_OMAP2 ++ tristate "OMAP2/3 frame buffer support (EXPERIMENTAL)" ++ depends on FB && OMAP2_DSS ++ ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ Frame buffer driver for OMAP2/3 based boards. ++ ++config FB_OMAP2_DEBUG_SUPPORT ++ bool "Debug support for OMAP2/3 FB" ++ default y ++ depends on FB_OMAP2 ++ help ++ Support for debug output. You have to enable the actual printing ++ with debug module parameter. ++ ++config FB_OMAP2_FORCE_AUTO_UPDATE ++ bool "Force main display to automatic update mode" ++ depends on FB_OMAP2 ++ help ++ Forces main display to automatic update mode (if possible), ++ and also enables tearsync (if possible). By default ++ displays that support manual update are started in manual ++ update mode. ++ ++config FB_OMAP2_NUM_FBS ++ int "Number of framebuffers" ++ range 1 10 ++ default 3 ++ depends on FB_OMAP2 ++ help ++ Select the number of framebuffers created. OMAP2/3 has 3 overlays ++ so normally this would be 3. +diff --git a/drivers/video/omap2/omapfb/Makefile b/drivers/video/omap2/omapfb/Makefile +new file mode 100644 +index 0000000..51c2e00 +--- /dev/null ++++ b/drivers/video/omap2/omapfb/Makefile +@@ -0,0 +1,2 @@ ++obj-$(CONFIG_FB_OMAP2) += omapfb.o ++omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o +diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c +new file mode 100644 +index 0000000..7f18d2a +--- /dev/null ++++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c +@@ -0,0 +1,656 @@ ++/* ++ * linux/drivers/video/omap2/omapfb-ioctl.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "omapfb.h" ++ ++static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ struct omap_overlay *ovl; ++ struct omap_overlay_info info; ++ int r = 0; ++ ++ DBG("omapfb_setup_plane\n"); ++ ++ omapfb_lock(fbdev); ++ ++ if (ofbi->num_overlays != 1) { ++ r = -EINVAL; ++ goto out; ++ } ++ ++ /* XXX uses only the first overlay */ ++ ovl = ofbi->overlays[0]; ++ ++ if (pi->enabled && !ofbi->region.size) { ++ /* ++ * This plane's memory was freed, can't enable it ++ * until it's reallocated. ++ */ ++ r = -EINVAL; ++ goto out; ++ } ++ ++ ovl->get_overlay_info(ovl, &info); ++ ++ info.pos_x = pi->pos_x; ++ info.pos_y = pi->pos_y; ++ info.out_width = pi->out_width; ++ info.out_height = pi->out_height; ++ info.enabled = pi->enabled; ++ ++ r = ovl->set_overlay_info(ovl, &info); ++ if (r) ++ goto out; ++ ++ if (ovl->manager) { ++ r = ovl->manager->apply(ovl->manager); ++ if (r) ++ goto out; ++ } ++ ++ if (display) { ++ u16 w, h; ++ ++ if (display->sync) ++ display->sync(display); ++ ++ display->get_resolution(display, &w, &h); ++ ++ if (display->update) ++ display->update(display, 0, 0, w, h); ++ } ++ ++out: ++ omapfb_unlock(fbdev); ++ if (r) ++ dev_err(fbdev->dev, "setup_plane failed\n"); ++ return r; ++} ++ ++static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ ++ omapfb_lock(fbdev); ++ ++ if (ofbi->num_overlays != 1) { ++ memset(pi, 0, sizeof(*pi)); ++ } else { ++ struct omap_overlay_info *ovli; ++ struct omap_overlay *ovl; ++ ++ ovl = ofbi->overlays[0]; ++ ovli = &ovl->info; ++ ++ pi->pos_x = ovli->pos_x; ++ pi->pos_y = ovli->pos_y; ++ pi->enabled = ovli->enabled; ++ pi->channel_out = 0; /* xxx */ ++ pi->mirror = 0; ++ pi->out_width = ovli->out_width; ++ pi->out_height = ovli->out_height; ++ } ++ ++ omapfb_unlock(fbdev); ++ ++ return 0; ++} ++ ++static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omapfb2_mem_region *rg; ++ int r, i; ++ size_t size; ++ ++ if (mi->type > OMAPFB_MEMTYPE_MAX) ++ return -EINVAL; ++ ++ size = PAGE_ALIGN(mi->size); ++ ++ rg = &ofbi->region; ++ ++ omapfb_lock(fbdev); ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i]->info.enabled) { ++ r = -EBUSY; ++ goto out; ++ } ++ } ++ ++ if (rg->size != size || rg->type != mi->type) { ++ r = omapfb_realloc_fbmem(fbi, size, mi->type); ++ if (r) { ++ dev_err(fbdev->dev, "realloc fbmem failed\n"); ++ goto out; ++ } ++ } ++ ++ r = 0; ++out: ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omapfb2_mem_region *rg; ++ ++ rg = &ofbi->region; ++ memset(mi, 0, sizeof(*mi)); ++ ++ omapfb_lock(fbdev); ++ mi->size = rg->size; ++ mi->type = rg->type; ++ omapfb_unlock(fbdev); ++ ++ return 0; ++} ++ ++static int omapfb_update_window(struct fb_info *fbi, ++ u32 x, u32 y, u32 w, u32 h) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ u16 dw, dh; ++ ++ if (!display) ++ return 0; ++ ++ if (w == 0 || h == 0) ++ return 0; ++ ++ display->get_resolution(display, &dw, &dh); ++ ++ if (x + w > dw || y + h > dh) ++ return -EINVAL; ++ ++ omapfb_lock(fbdev); ++ display->update(display, x, y, w, h); ++ omapfb_unlock(fbdev); ++ ++ return 0; ++} ++ ++static int omapfb_set_update_mode(struct fb_info *fbi, ++ enum omapfb_update_mode mode) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ enum omap_dss_update_mode um; ++ int r; ++ ++ if (!display || !display->set_update_mode) ++ return -EINVAL; ++ ++ switch (mode) { ++ case OMAPFB_UPDATE_DISABLED: ++ um = OMAP_DSS_UPDATE_DISABLED; ++ break; ++ ++ case OMAPFB_AUTO_UPDATE: ++ um = OMAP_DSS_UPDATE_AUTO; ++ break; ++ ++ case OMAPFB_MANUAL_UPDATE: ++ um = OMAP_DSS_UPDATE_MANUAL; ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ omapfb_lock(fbdev); ++ r = display->set_update_mode(display, um); ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++static int omapfb_get_update_mode(struct fb_info *fbi, ++ enum omapfb_update_mode *mode) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ enum omap_dss_update_mode m; ++ ++ if (!display || !display->get_update_mode) ++ return -EINVAL; ++ ++ omapfb_lock(fbdev); ++ m = display->get_update_mode(display); ++ omapfb_unlock(fbdev); ++ ++ switch (m) { ++ case OMAP_DSS_UPDATE_DISABLED: ++ *mode = OMAPFB_UPDATE_DISABLED; ++ break; ++ case OMAP_DSS_UPDATE_AUTO: ++ *mode = OMAPFB_AUTO_UPDATE; ++ break; ++ case OMAP_DSS_UPDATE_MANUAL: ++ *mode = OMAPFB_MANUAL_UPDATE; ++ break; ++ default: ++ BUG(); ++ } ++ ++ return 0; ++} ++ ++/* XXX this color key handling is a hack... */ ++static struct omapfb_color_key omapfb_color_keys[2]; ++ ++static int _omapfb_set_color_key(struct omap_overlay_manager *mgr, ++ struct omapfb_color_key *ck) ++{ ++ enum omap_dss_color_key_type kt; ++ ++ if(!mgr->set_default_color || !mgr->set_trans_key || ++ !mgr->enable_trans_key) ++ return 0; ++ ++ if (ck->key_type == OMAPFB_COLOR_KEY_DISABLED) { ++ mgr->enable_trans_key(mgr, 0); ++ omapfb_color_keys[mgr->id] = *ck; ++ return 0; ++ } ++ ++ switch(ck->key_type) { ++ case OMAPFB_COLOR_KEY_GFX_DST: ++ kt = OMAP_DSS_COLOR_KEY_GFX_DST; ++ break; ++ case OMAPFB_COLOR_KEY_VID_SRC: ++ kt = OMAP_DSS_COLOR_KEY_VID_SRC; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ mgr->set_default_color(mgr, ck->background); ++ mgr->set_trans_key(mgr, kt, ck->trans_key); ++ mgr->enable_trans_key(mgr, 1); ++ ++ omapfb_color_keys[mgr->id] = *ck; ++ ++ return 0; ++} ++ ++static int omapfb_set_color_key(struct fb_info *fbi, ++ struct omapfb_color_key *ck) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ int r; ++ int i; ++ struct omap_overlay_manager *mgr = NULL; ++ ++ omapfb_lock(fbdev); ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i]->manager) { ++ mgr = ofbi->overlays[i]->manager; ++ break; ++ } ++ } ++ ++ if (!mgr) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ if(!mgr->set_default_color || !mgr->set_trans_key || ++ !mgr->enable_trans_key) { ++ r = -ENODEV; ++ goto err; ++ } ++ ++ r = _omapfb_set_color_key(mgr, ck); ++err: ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++static int omapfb_get_color_key(struct fb_info *fbi, ++ struct omapfb_color_key *ck) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_overlay_manager *mgr = NULL; ++ int r = 0; ++ int i; ++ ++ omapfb_lock(fbdev); ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i]->manager) { ++ mgr = ofbi->overlays[i]->manager; ++ break; ++ } ++ } ++ ++ if (!mgr) { ++ r = -EINVAL; ++ goto err; ++ } ++ ++ if(!mgr->set_default_color || !mgr->set_trans_key || ++ !mgr->enable_trans_key) { ++ r = -ENODEV; ++ goto err; ++ } ++ ++ *ck = omapfb_color_keys[mgr->id]; ++err: ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++static int omapfb_memory_read(struct fb_info *fbi, ++ struct omapfb_memory_read *mr) ++{ ++ struct omap_display *display = fb2display(fbi); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ void *buf; ++ int r; ++ ++ if (!display || !display->memory_read) ++ return -ENOENT; ++ ++ if (!access_ok(VERIFY_WRITE, mr->buffer, mr->buffer_size)) ++ return -EFAULT; ++ ++ if (mr->w * mr->h * 3 > mr->buffer_size) ++ return -EINVAL; ++ ++ buf = vmalloc(mr->buffer_size); ++ if (!buf) { ++ DBG("vmalloc failed\n"); ++ return -ENOMEM; ++ } ++ ++ omapfb_lock(fbdev); ++ ++ r = display->memory_read(display, buf, mr->buffer_size, ++ mr->x, mr->y, mr->w, mr->h); ++ ++ if (r > 0) { ++ if (copy_to_user(mr->buffer, buf, mr->buffer_size)) ++ r = -EFAULT; ++ } ++ ++ vfree(buf); ++ ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ ++ union { ++ struct omapfb_update_window_old uwnd_o; ++ struct omapfb_update_window uwnd; ++ struct omapfb_plane_info plane_info; ++ struct omapfb_caps caps; ++ struct omapfb_mem_info mem_info; ++ struct omapfb_color_key color_key; ++ enum omapfb_update_mode update_mode; ++ int test_num; ++ struct omapfb_memory_read memory_read; ++ } p; ++ ++ int r = 0; ++ ++ switch (cmd) { ++ case OMAPFB_SYNC_GFX: ++ DBG("ioctl SYNC_GFX\n"); ++ if (!display || !display->sync) { ++ /* DSS1 never returns an error here, so we neither */ ++ /*r = -EINVAL;*/ ++ break; ++ } ++ ++ omapfb_lock(fbdev); ++ r = display->sync(display); ++ omapfb_unlock(fbdev); ++ break; ++ ++ case OMAPFB_UPDATE_WINDOW_OLD: ++ DBG("ioctl UPDATE_WINDOW_OLD\n"); ++ if (!display || !display->update) { ++ r = -EINVAL; ++ break; ++ } ++ ++ if (copy_from_user(&p.uwnd_o, ++ (void __user *)arg, ++ sizeof(p.uwnd_o))) { ++ r = -EFAULT; ++ break; ++ } ++ ++ r = omapfb_update_window(fbi, p.uwnd_o.x, p.uwnd_o.y, ++ p.uwnd_o.width, p.uwnd_o.height); ++ break; ++ ++ case OMAPFB_UPDATE_WINDOW: ++ DBG("ioctl UPDATE_WINDOW\n"); ++ if (!display || !display->update) { ++ r = -EINVAL; ++ break; ++ } ++ ++ if (copy_from_user(&p.uwnd, (void __user *)arg, ++ sizeof(p.uwnd))) { ++ r = -EFAULT; ++ break; ++ } ++ ++ r = omapfb_update_window(fbi, p.uwnd.x, p.uwnd.y, ++ p.uwnd.width, p.uwnd.height); ++ break; ++ ++ case OMAPFB_SETUP_PLANE: ++ DBG("ioctl SETUP_PLANE\n"); ++ if (copy_from_user(&p.plane_info, (void __user *)arg, ++ sizeof(p.plane_info))) ++ r = -EFAULT; ++ else ++ r = omapfb_setup_plane(fbi, &p.plane_info); ++ break; ++ ++ case OMAPFB_QUERY_PLANE: ++ DBG("ioctl QUERY_PLANE\n"); ++ r = omapfb_query_plane(fbi, &p.plane_info); ++ if (r < 0) ++ break; ++ if (copy_to_user((void __user *)arg, &p.plane_info, ++ sizeof(p.plane_info))) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_SETUP_MEM: ++ DBG("ioctl SETUP_MEM\n"); ++ if (copy_from_user(&p.mem_info, (void __user *)arg, ++ sizeof(p.mem_info))) ++ r = -EFAULT; ++ else ++ r = omapfb_setup_mem(fbi, &p.mem_info); ++ break; ++ ++ case OMAPFB_QUERY_MEM: ++ DBG("ioctl QUERY_MEM\n"); ++ r = omapfb_query_mem(fbi, &p.mem_info); ++ if (r < 0) ++ break; ++ if (copy_to_user((void __user *)arg, &p.mem_info, ++ sizeof(p.mem_info))) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_GET_CAPS: ++ DBG("ioctl GET_CAPS\n"); ++ if (!display) { ++ r = -EINVAL; ++ break; ++ } ++ ++ p.caps.ctrl = display->caps; ++ ++ if (copy_to_user((void __user *)arg, &p.caps, sizeof(p.caps))) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_SET_UPDATE_MODE: ++ DBG("ioctl SET_UPDATE_MODE\n"); ++ if (get_user(p.update_mode, (int __user *)arg)) ++ r = -EFAULT; ++ else ++ r = omapfb_set_update_mode(fbi, p.update_mode); ++ break; ++ ++ case OMAPFB_GET_UPDATE_MODE: ++ DBG("ioctl GET_UPDATE_MODE\n"); ++ r = omapfb_get_update_mode(fbi, &p.update_mode); ++ if (r) ++ break; ++ if (put_user(p.update_mode, ++ (enum omapfb_update_mode __user *)arg)) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_SET_COLOR_KEY: ++ DBG("ioctl SET_COLOR_KEY\n"); ++ if (copy_from_user(&p.color_key, (void __user *)arg, ++ sizeof(p.color_key))) ++ r = -EFAULT; ++ else ++ r = omapfb_set_color_key(fbi, &p.color_key); ++ break; ++ ++ case OMAPFB_GET_COLOR_KEY: ++ DBG("ioctl GET_COLOR_KEY\n"); ++ if ((r = omapfb_get_color_key(fbi, &p.color_key)) < 0) ++ break; ++ if (copy_to_user((void __user *)arg, &p.color_key, ++ sizeof(p.color_key))) ++ r = -EFAULT; ++ break; ++ ++ case OMAPFB_WAITFORVSYNC: ++ DBG("ioctl WAITFORVSYNC\n"); ++ if (!display) { ++ r = -EINVAL; ++ break; ++ } ++ ++ r = display->wait_vsync(display); ++ break; ++ ++ /* LCD and CTRL tests do the same thing for backward ++ * compatibility */ ++ case OMAPFB_LCD_TEST: ++ DBG("ioctl LCD_TEST\n"); ++ if (get_user(p.test_num, (int __user *)arg)) { ++ r = -EFAULT; ++ break; ++ } ++ if (!display || !display->run_test) { ++ r = -EINVAL; ++ break; ++ } ++ ++ r = display->run_test(display, p.test_num); ++ ++ break; ++ ++ case OMAPFB_CTRL_TEST: ++ DBG("ioctl CTRL_TEST\n"); ++ if (get_user(p.test_num, (int __user *)arg)) { ++ r = -EFAULT; ++ break; ++ } ++ if (!display || !display->run_test) { ++ r = -EINVAL; ++ break; ++ } ++ ++ r = display->run_test(display, p.test_num); ++ ++ break; ++ ++ case OMAPFB_MEMORY_READ: ++ DBG("ioctl MEMORY_READ\n"); ++ ++ if (copy_from_user(&p.memory_read, (void __user *)arg, ++ sizeof(p.memory_read))) { ++ r = -EFAULT; ++ break; ++ } ++ ++ r = omapfb_memory_read(fbi, &p.memory_read); ++ ++ break; ++ ++ default: ++ dev_err(fbdev->dev, "Unknown ioctl 0x%x\n", cmd); ++ r = -EINVAL; ++ } ++ ++ if (r < 0) ++ DBG("ioctl failed: %d\n", r); ++ ++ return r; ++} ++ ++ +diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c +new file mode 100644 +index 0000000..852abe5 +--- /dev/null ++++ b/drivers/video/omap2/omapfb/omapfb-main.c +@@ -0,0 +1,2010 @@ ++/* ++ * linux/drivers/video/omap2/omapfb-main.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include "omapfb.h" ++ ++#define MODULE_NAME "omapfb" ++ ++static char *def_mode; ++static char *def_vram; ++static int def_vrfb; ++static int def_rotate; ++static int def_mirror; ++ ++#ifdef DEBUG ++unsigned int omapfb_debug; ++module_param_named(debug, omapfb_debug, bool, 0644); ++static unsigned int omapfb_test_pattern; ++module_param_named(test, omapfb_test_pattern, bool, 0644); ++#endif ++ ++#ifdef DEBUG ++static void draw_pixel(struct fb_info *fbi, int x, int y, unsigned color) ++{ ++ struct fb_var_screeninfo *var = &fbi->var; ++ struct fb_fix_screeninfo *fix = &fbi->fix; ++ void __iomem *addr = fbi->screen_base; ++ const unsigned bytespp = var->bits_per_pixel >> 3; ++ const unsigned line_len = fix->line_length / bytespp; ++ ++ int r = (color >> 16) & 0xff; ++ int g = (color >> 8) & 0xff; ++ int b = (color >> 0) & 0xff; ++ ++ if (var->bits_per_pixel == 16) { ++ u16 __iomem *p = (u16 __iomem *)addr; ++ p += y * line_len + x; ++ ++ r = r * 32 / 256; ++ g = g * 64 / 256; ++ b = b * 32 / 256; ++ ++ __raw_writew((r << 11) | (g << 5) | (b << 0), p); ++ } else if (var->bits_per_pixel == 24) { ++ u8 __iomem *p = (u8 __iomem *)addr; ++ p += (y * line_len + x) * 3; ++ ++ __raw_writeb(b, p + 0); ++ __raw_writeb(g, p + 1); ++ __raw_writeb(r, p + 2); ++ } else if (var->bits_per_pixel == 32) { ++ u32 __iomem *p = (u32 __iomem *)addr; ++ p += y * line_len + x; ++ __raw_writel(color, p); ++ } ++} ++ ++static void fill_fb(struct fb_info *fbi) ++{ ++ struct fb_var_screeninfo *var = &fbi->var; ++ const short w = var->xres_virtual; ++ const short h = var->yres_virtual; ++ void __iomem *addr = fbi->screen_base; ++ int y, x; ++ ++ if (!addr) ++ return; ++ ++ DBG("fill_fb %dx%d, line_len %d bytes\n", w, h, fbi->fix.line_length); ++ ++ for (y = 0; y < h; y++) { ++ for (x = 0; x < w; x++) { ++ if (x < 20 && y < 20) ++ draw_pixel(fbi, x, y, 0xffffff); ++ else if (x < 20 && (y > 20 && y < h - 20)) ++ draw_pixel(fbi, x, y, 0xff); ++ else if (y < 20 && (x > 20 && x < w - 20)) ++ draw_pixel(fbi, x, y, 0xff00); ++ else if (x > w - 20 && (y > 20 && y < h - 20)) ++ draw_pixel(fbi, x, y, 0xff0000); ++ else if (y > h - 20 && (x > 20 && x < w - 20)) ++ draw_pixel(fbi, x, y, 0xffff00); ++ else if (x == 20 || x == w - 20 || ++ y == 20 || y == h - 20) ++ draw_pixel(fbi, x, y, 0xffffff); ++ else if (x == y || w - x == h - y) ++ draw_pixel(fbi, x, y, 0xff00ff); ++ else if (w - x == y || x == h - y) ++ draw_pixel(fbi, x, y, 0x00ffff); ++ else if (x > 20 && y > 20 && x < w - 20 && y < h - 20) { ++ int t = x * 3 / w; ++ unsigned r = 0, g = 0, b = 0; ++ unsigned c; ++ if (var->bits_per_pixel == 16) { ++ if (t == 0) ++ b = (y % 32) * 256 / 32; ++ else if (t == 1) ++ g = (y % 64) * 256 / 64; ++ else if (t == 2) ++ r = (y % 32) * 256 / 32; ++ } else { ++ if (t == 0) ++ b = (y % 256); ++ else if (t == 1) ++ g = (y % 256); ++ else if (t == 2) ++ r = (y % 256); ++ } ++ c = (r << 16) | (g << 8) | (b << 0); ++ draw_pixel(fbi, x, y, c); ++ } else { ++ draw_pixel(fbi, x, y, 0); ++ } ++ } ++ } ++} ++#endif ++ ++static unsigned omapfb_get_vrfb_offset(struct omapfb_info *ofbi, int rot) ++{ ++ struct vrfb *vrfb = &ofbi->region.vrfb; ++ unsigned offset; ++ ++ switch (rot) { ++ case FB_ROTATE_UR: ++ offset = 0; ++ break; ++ case FB_ROTATE_CW: ++ offset = vrfb->yoffset; ++ break; ++ case FB_ROTATE_UD: ++ offset = vrfb->yoffset * OMAP_VRFB_LINE_LEN + vrfb->xoffset; ++ break; ++ case FB_ROTATE_CCW: ++ offset = vrfb->xoffset * OMAP_VRFB_LINE_LEN; ++ break; ++ default: ++ BUG(); ++ } ++ ++ offset *= vrfb->bytespp; ++ ++ return offset; ++} ++ ++static u32 omapfb_get_region_rot_paddr(struct omapfb_info *ofbi) ++{ ++ if (ofbi->rotation_type == OMAPFB_ROT_VRFB) { ++ unsigned offset; ++ int rot; ++ ++ rot = ofbi->rotation; ++ ++ offset = omapfb_get_vrfb_offset(ofbi, rot); ++ ++ return ofbi->region.vrfb.paddr[rot] + offset; ++ } else { ++ return ofbi->region.paddr; ++ } ++} ++ ++u32 omapfb_get_region_paddr(struct omapfb_info *ofbi) ++{ ++ if (ofbi->rotation_type == OMAPFB_ROT_VRFB) ++ return ofbi->region.vrfb.paddr[0]; ++ else ++ return ofbi->region.paddr; ++} ++ ++void __iomem *omapfb_get_region_vaddr(struct omapfb_info *ofbi) ++{ ++ if (ofbi->rotation_type == OMAPFB_ROT_VRFB) ++ return ofbi->region.vrfb.vaddr[0]; ++ else ++ return ofbi->region.vaddr; ++} ++ ++static struct omapfb_colormode omapfb_colormodes[] = { ++ { ++ .dssmode = OMAP_DSS_COLOR_UYVY, ++ .bits_per_pixel = 16, ++ .nonstd = OMAPFB_COLOR_YUV422, ++ }, { ++ .dssmode = OMAP_DSS_COLOR_YUV2, ++ .bits_per_pixel = 16, ++ .nonstd = OMAPFB_COLOR_YUY422, ++ }, { ++ .dssmode = OMAP_DSS_COLOR_ARGB16, ++ .bits_per_pixel = 16, ++ .red = { .length = 4, .offset = 8, .msb_right = 0 }, ++ .green = { .length = 4, .offset = 4, .msb_right = 0 }, ++ .blue = { .length = 4, .offset = 0, .msb_right = 0 }, ++ .transp = { .length = 4, .offset = 12, .msb_right = 0 }, ++ }, { ++ .dssmode = OMAP_DSS_COLOR_RGB16, ++ .bits_per_pixel = 16, ++ .red = { .length = 5, .offset = 11, .msb_right = 0 }, ++ .green = { .length = 6, .offset = 5, .msb_right = 0 }, ++ .blue = { .length = 5, .offset = 0, .msb_right = 0 }, ++ .transp = { .length = 0, .offset = 0, .msb_right = 0 }, ++ }, { ++ .dssmode = OMAP_DSS_COLOR_RGB24P, ++ .bits_per_pixel = 24, ++ .red = { .length = 8, .offset = 16, .msb_right = 0 }, ++ .green = { .length = 8, .offset = 8, .msb_right = 0 }, ++ .blue = { .length = 8, .offset = 0, .msb_right = 0 }, ++ .transp = { .length = 0, .offset = 0, .msb_right = 0 }, ++ }, { ++ .dssmode = OMAP_DSS_COLOR_RGB24U, ++ .bits_per_pixel = 32, ++ .red = { .length = 8, .offset = 16, .msb_right = 0 }, ++ .green = { .length = 8, .offset = 8, .msb_right = 0 }, ++ .blue = { .length = 8, .offset = 0, .msb_right = 0 }, ++ .transp = { .length = 0, .offset = 0, .msb_right = 0 }, ++ }, { ++ .dssmode = OMAP_DSS_COLOR_ARGB32, ++ .bits_per_pixel = 32, ++ .red = { .length = 8, .offset = 16, .msb_right = 0 }, ++ .green = { .length = 8, .offset = 8, .msb_right = 0 }, ++ .blue = { .length = 8, .offset = 0, .msb_right = 0 }, ++ .transp = { .length = 8, .offset = 24, .msb_right = 0 }, ++ }, { ++ .dssmode = OMAP_DSS_COLOR_RGBA32, ++ .bits_per_pixel = 32, ++ .red = { .length = 8, .offset = 24, .msb_right = 0 }, ++ .green = { .length = 8, .offset = 16, .msb_right = 0 }, ++ .blue = { .length = 8, .offset = 8, .msb_right = 0 }, ++ .transp = { .length = 8, .offset = 0, .msb_right = 0 }, ++ }, { ++ .dssmode = OMAP_DSS_COLOR_RGBX32, ++ .bits_per_pixel = 32, ++ .red = { .length = 8, .offset = 24, .msb_right = 0 }, ++ .green = { .length = 8, .offset = 16, .msb_right = 0 }, ++ .blue = { .length = 8, .offset = 8, .msb_right = 0 }, ++ .transp = { .length = 0, .offset = 0, .msb_right = 0 }, ++ }, ++}; ++ ++static bool cmp_var_to_colormode(struct fb_var_screeninfo *var, ++ struct omapfb_colormode *color) ++{ ++ bool cmp_component(struct fb_bitfield *f1, struct fb_bitfield *f2) ++ { ++ return f1->length == f2->length && ++ f1->offset == f2->offset && ++ f1->msb_right == f2->msb_right; ++ } ++ ++ if (var->bits_per_pixel == 0 || ++ var->red.length == 0 || ++ var->blue.length == 0 || ++ var->green.length == 0) ++ return 0; ++ ++ return var->bits_per_pixel == color->bits_per_pixel && ++ cmp_component(&var->red, &color->red) && ++ cmp_component(&var->green, &color->green) && ++ cmp_component(&var->blue, &color->blue) && ++ cmp_component(&var->transp, &color->transp); ++} ++ ++static void assign_colormode_to_var(struct fb_var_screeninfo *var, ++ struct omapfb_colormode *color) ++{ ++ var->bits_per_pixel = color->bits_per_pixel; ++ var->nonstd = color->nonstd; ++ var->red = color->red; ++ var->green = color->green; ++ var->blue = color->blue; ++ var->transp = color->transp; ++} ++ ++static enum omap_color_mode fb_mode_to_dss_mode(struct fb_var_screeninfo *var) ++{ ++ enum omap_color_mode dssmode; ++ int i; ++ ++ /* first match with nonstd field */ ++ if (var->nonstd) { ++ for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { ++ struct omapfb_colormode *mode = &omapfb_colormodes[i]; ++ if (var->nonstd == mode->nonstd) { ++ assign_colormode_to_var(var, mode); ++ return mode->dssmode; ++ } ++ } ++ ++ return -EINVAL; ++ } ++ ++ /* then try exact match of bpp and colors */ ++ for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { ++ struct omapfb_colormode *mode = &omapfb_colormodes[i]; ++ if (cmp_var_to_colormode(var, mode)) { ++ assign_colormode_to_var(var, mode); ++ return mode->dssmode; ++ } ++ } ++ ++ /* match with bpp if user has not filled color fields ++ * properly */ ++ switch (var->bits_per_pixel) { ++ case 1: ++ dssmode = OMAP_DSS_COLOR_CLUT1; ++ break; ++ case 2: ++ dssmode = OMAP_DSS_COLOR_CLUT2; ++ break; ++ case 4: ++ dssmode = OMAP_DSS_COLOR_CLUT4; ++ break; ++ case 8: ++ dssmode = OMAP_DSS_COLOR_CLUT8; ++ break; ++ case 12: ++ dssmode = OMAP_DSS_COLOR_RGB12U; ++ break; ++ case 16: ++ dssmode = OMAP_DSS_COLOR_RGB16; ++ break; ++ case 24: ++ dssmode = OMAP_DSS_COLOR_RGB24P; ++ break; ++ case 32: ++ dssmode = OMAP_DSS_COLOR_RGB24U; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { ++ struct omapfb_colormode *mode = &omapfb_colormodes[i]; ++ if (dssmode == mode->dssmode) { ++ assign_colormode_to_var(var, mode); ++ return mode->dssmode; ++ } ++ } ++ ++ return -EINVAL; ++} ++ ++void set_fb_fix(struct fb_info *fbi) ++{ ++ struct fb_fix_screeninfo *fix = &fbi->fix; ++ struct fb_var_screeninfo *var = &fbi->var; ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_mem_region *rg = &ofbi->region; ++ ++ DBG("set_fb_fix\n"); ++ ++ /* used by open/write in fbmem.c */ ++ fbi->screen_base = (char __iomem *)omapfb_get_region_vaddr(ofbi); ++ ++ /* used by mmap in fbmem.c */ ++ if (ofbi->rotation_type == OMAPFB_ROT_VRFB) ++ fix->line_length = ++ (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3; ++ else ++ fix->line_length = ++ (var->xres_virtual * var->bits_per_pixel) >> 3; ++ fix->smem_start = omapfb_get_region_paddr(ofbi); ++ fix->smem_len = rg->size; ++ ++ fix->type = FB_TYPE_PACKED_PIXELS; ++ ++ if (var->nonstd) ++ fix->visual = FB_VISUAL_PSEUDOCOLOR; ++ else { ++ switch (var->bits_per_pixel) { ++ case 32: ++ case 24: ++ case 16: ++ case 12: ++ fix->visual = FB_VISUAL_TRUECOLOR; ++ /* 12bpp is stored in 16 bits */ ++ break; ++ case 1: ++ case 2: ++ case 4: ++ case 8: ++ fix->visual = FB_VISUAL_PSEUDOCOLOR; ++ break; ++ } ++ } ++ ++ fix->accel = FB_ACCEL_NONE; ++ ++ fix->xpanstep = 1; ++ fix->ypanstep = 1; ++ ++ if (rg->size) { ++ if (ofbi->rotation_type == OMAPFB_ROT_VRFB) ++ omap_vrfb_setup(&rg->vrfb, rg->paddr, ++ var->xres_virtual, var->yres_virtual, ++ var->bits_per_pixel >> 3); ++ } ++} ++ ++/* check new var and possibly modify it to be ok */ ++int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omap_display *display = fb2display(fbi); ++ unsigned long max_frame_size; ++ unsigned long line_size; ++ int xres_min, yres_min; ++ int xres_max, yres_max; ++ enum omap_color_mode mode = 0; ++ int i; ++ int bytespp; ++ ++ DBG("check_fb_var %d\n", ofbi->id); ++ ++ if (ofbi->region.size == 0) ++ return 0; ++ ++ mode = fb_mode_to_dss_mode(var); ++ if (mode < 0) { ++ DBG("cannot convert var to omap dss mode\n"); ++ return -EINVAL; ++ } ++ ++ for (i = 0; i < ofbi->num_overlays; ++i) { ++ if ((ofbi->overlays[i]->supported_modes & mode) == 0) { ++ DBG("invalid mode\n"); ++ return -EINVAL; ++ } ++ } ++ ++ if (var->rotate < 0 || var->rotate > 3) ++ return -EINVAL; ++ ++ if (var->rotate != fbi->var.rotate) { ++ DBG("rotation changing\n"); ++ ++ ofbi->rotation = var->rotate; ++ ++ if (abs(var->rotate - fbi->var.rotate) != 2) { ++ int tmp; ++ DBG("rotate changing 90/270 degrees. " ++ "swapping x/y res\n"); ++ ++ tmp = var->yres; ++ var->yres = var->xres; ++ var->xres = tmp; ++ ++ tmp = var->yres_virtual; ++ var->yres_virtual = var->xres_virtual; ++ var->xres_virtual = tmp; ++ } ++ } ++ ++ xres_min = OMAPFB_PLANE_XRES_MIN; ++ xres_max = 2048; ++ yres_min = OMAPFB_PLANE_YRES_MIN; ++ yres_max = 2048; ++ ++ bytespp = var->bits_per_pixel >> 3; ++ ++ /* XXX: some applications seem to set virtual res to 0. */ ++ if (var->xres_virtual == 0) ++ var->xres_virtual = var->xres; ++ ++ if (var->yres_virtual == 0) ++ var->yres_virtual = var->yres; ++ ++ if (var->xres_virtual < xres_min || var->yres_virtual < yres_min) ++ return -EINVAL; ++ ++ if (var->xres < xres_min) ++ var->xres = xres_min; ++ if (var->yres < yres_min) ++ var->yres = yres_min; ++ if (var->xres > xres_max) ++ var->xres = xres_max; ++ if (var->yres > yres_max) ++ var->yres = yres_max; ++ ++ if (var->xres > var->xres_virtual) ++ var->xres = var->xres_virtual; ++ if (var->yres > var->yres_virtual) ++ var->yres = var->yres_virtual; ++ ++ if (ofbi->rotation_type == OMAPFB_ROT_VRFB) ++ line_size = OMAP_VRFB_LINE_LEN * bytespp; ++ else ++ line_size = var->xres_virtual * bytespp; ++ ++ max_frame_size = ofbi->region.size; ++ ++ DBG("max frame size %lu, line size %lu\n", max_frame_size, line_size); ++ ++ if (line_size * var->yres_virtual > max_frame_size) { ++ DBG("can't fit FB into memory, reducing y\n"); ++ var->yres_virtual = max_frame_size / line_size; ++ ++ if (var->yres_virtual < yres_min) ++ var->yres_virtual = yres_min; ++ ++ if (var->yres > var->yres_virtual) ++ var->yres = var->yres_virtual; ++ } ++ ++ if (line_size * var->yres_virtual > max_frame_size) { ++ DBG("can't fit FB into memory, reducing x\n"); ++ if (ofbi->rotation_type == OMAPFB_ROT_VRFB) ++ return -EINVAL; ++ ++ var->xres_virtual = max_frame_size / var->yres_virtual / ++ bytespp; ++ ++ if (var->xres_virtual < xres_min) ++ var->xres_virtual = xres_min; ++ ++ if (var->xres > var->xres_virtual) ++ var->xres = var->xres_virtual; ++ ++ line_size = var->xres_virtual * bytespp; ++ } ++ ++ if (line_size * var->yres_virtual > max_frame_size) { ++ DBG("cannot fit FB to memory\n"); ++ return -EINVAL; ++ } ++ ++ if (var->xres + var->xoffset > var->xres_virtual) ++ var->xoffset = var->xres_virtual - var->xres; ++ if (var->yres + var->yoffset > var->yres_virtual) ++ var->yoffset = var->yres_virtual - var->yres; ++ ++ DBG("xres = %d, yres = %d, vxres = %d, vyres = %d\n", ++ var->xres, var->yres, ++ var->xres_virtual, var->yres_virtual); ++ ++ var->height = -1; ++ var->width = -1; ++ var->grayscale = 0; ++ ++ if (display && display->get_timings) { ++ struct omap_video_timings timings; ++ display->get_timings(display, &timings); ++ ++ /* pixclock in ps, the rest in pixclock */ ++ var->pixclock = timings.pixel_clock != 0 ? ++ KHZ2PICOS(timings.pixel_clock) : ++ 0; ++ var->left_margin = timings.hfp; ++ var->right_margin = timings.hbp; ++ var->upper_margin = timings.vfp; ++ var->lower_margin = timings.vbp; ++ var->hsync_len = timings.hsw; ++ var->vsync_len = timings.vsw; ++ } else { ++ var->pixclock = 0; ++ var->left_margin = 0; ++ var->right_margin = 0; ++ var->upper_margin = 0; ++ var->lower_margin = 0; ++ var->hsync_len = 0; ++ var->vsync_len = 0; ++ } ++ ++ /* TODO: get these from panel->config */ ++ var->vmode = FB_VMODE_NONINTERLACED; ++ var->sync = 0; ++ ++ return 0; ++} ++ ++/* ++ * --------------------------------------------------------------------------- ++ * fbdev framework callbacks ++ * --------------------------------------------------------------------------- ++ */ ++static int omapfb_open(struct fb_info *fbi, int user) ++{ ++ return 0; ++} ++ ++static int omapfb_release(struct fb_info *fbi, int user) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ ++ DBG("Closing fb with plane index %d\n", ofbi->id); ++ ++ omapfb_lock(fbdev); ++#if 1 ++ if (display && display->get_update_mode && display->update) { ++ /* XXX this update should be removed, I think. But it's ++ * good for debugging */ ++ if (display->get_update_mode(display) == ++ OMAP_DSS_UPDATE_MANUAL) { ++ u16 w, h; ++ ++ if (display->sync) ++ display->sync(display); ++ ++ display->get_resolution(display, &w, &h); ++ display->update(display, 0, 0, w, h); ++ } ++ } ++#endif ++ ++ if (display && display->sync) ++ display->sync(display); ++ ++ omapfb_unlock(fbdev); ++ ++ return 0; ++} ++ ++/* setup overlay according to the fb */ ++static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, ++ u16 posx, u16 posy, u16 outw, u16 outh) ++{ ++ int r = 0; ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct fb_var_screeninfo *var = &fbi->var; ++ struct fb_fix_screeninfo *fix = &fbi->fix; ++ enum omap_color_mode mode = 0; ++ int offset; ++ u32 data_start_p; ++ void __iomem *data_start_v; ++ struct omap_overlay_info info; ++ int xres, yres; ++ int screen_width; ++ int rot, mirror; ++ ++ DBG("setup_overlay %d, posx %d, posy %d, outw %d, outh %d\n", ofbi->id, ++ posx, posy, outw, outh); ++ ++ if (ofbi->rotation == FB_ROTATE_CW || ofbi->rotation == FB_ROTATE_CCW) { ++ xres = var->yres; ++ yres = var->xres; ++ } else { ++ xres = var->xres; ++ yres = var->yres; ++ } ++ ++ offset = ((var->yoffset * var->xres_virtual + ++ var->xoffset) * var->bits_per_pixel) >> 3; ++ ++ if (ofbi->rotation_type == OMAPFB_ROT_VRFB) { ++ data_start_p = omapfb_get_region_rot_paddr(ofbi); ++ data_start_v = NULL; ++ } else { ++ data_start_p = omapfb_get_region_paddr(ofbi); ++ data_start_v = omapfb_get_region_vaddr(ofbi); ++ } ++ ++ data_start_p += offset; ++ data_start_v += offset; ++ ++ mode = fb_mode_to_dss_mode(var); ++ ++ if (mode == -EINVAL) { ++ DBG("fb_mode_to_dss_mode failed"); ++ r = -EINVAL; ++ goto err; ++ } ++ ++ screen_width = fix->line_length / (var->bits_per_pixel >> 3); ++ ++ ovl->get_overlay_info(ovl, &info); ++ ++ if (ofbi->rotation_type == OMAPFB_ROT_VRFB) { ++ rot = 0; ++ mirror = 0; ++ } else { ++ rot = ofbi->rotation; ++ mirror = ofbi->mirror; ++ } ++ ++ info.paddr = data_start_p; ++ info.vaddr = data_start_v; ++ info.screen_width = screen_width; ++ info.width = xres; ++ info.height = yres; ++ info.color_mode = mode; ++ info.rotation = rot; ++ info.mirror = mirror; ++ ++ info.pos_x = posx; ++ info.pos_y = posy; ++ info.out_width = outw; ++ info.out_height = outh; ++ ++ r = ovl->set_overlay_info(ovl, &info); ++ if (r) { ++ DBG("ovl->setup_overlay_info failed\n"); ++ goto err; ++ } ++ ++ return 0; ++ ++err: ++ DBG("setup_overlay failed\n"); ++ return r; ++} ++ ++/* apply var to the overlay */ ++int omapfb_apply_changes(struct fb_info *fbi, int init) ++{ ++ int r = 0; ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct fb_var_screeninfo *var = &fbi->var; ++ struct omap_overlay *ovl; ++ u16 posx, posy; ++ u16 outw, outh; ++ int i; ++ ++#ifdef DEBUG ++ if (omapfb_test_pattern) ++ fill_fb(fbi); ++#endif ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ ovl = ofbi->overlays[i]; ++ ++ DBG("apply_changes, fb %d, ovl %d\n", ofbi->id, ovl->id); ++ ++ if (ofbi->region.size == 0) { ++ /* the fb is not available. disable the overlay */ ++ omapfb_overlay_enable(ovl, 0); ++ if (!init && ovl->manager) ++ ovl->manager->apply(ovl->manager); ++ continue; ++ } ++ ++ if (init || (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) { ++ if (ofbi->rotation == FB_ROTATE_CW || ++ ofbi->rotation == FB_ROTATE_CCW) { ++ outw = var->yres; ++ outh = var->xres; ++ } else { ++ outw = var->xres; ++ outh = var->yres; ++ } ++ } else { ++ outw = ovl->info.out_width; ++ outh = ovl->info.out_height; ++ } ++ ++ if (init) { ++ posx = 0; ++ posy = 0; ++ } else { ++ posx = ovl->info.pos_x; ++ posy = ovl->info.pos_y; ++ } ++ ++ r = omapfb_setup_overlay(fbi, ovl, posx, posy, outw, outh); ++ if (r) ++ goto err; ++ ++ if (!init && ovl->manager) ++ ovl->manager->apply(ovl->manager); ++ } ++ return 0; ++err: ++ DBG("apply_changes failed\n"); ++ return r; ++} ++ ++/* checks var and eventually tweaks it to something supported, ++ * DO NOT MODIFY PAR */ ++static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) ++{ ++ int r; ++ ++ DBG("check_var(%d)\n", FB2OFB(fbi)->id); ++ ++ r = check_fb_var(fbi, var); ++ ++ return r; ++} ++ ++/* set the video mode according to info->var */ ++static int omapfb_set_par(struct fb_info *fbi) ++{ ++ int r; ++ ++ DBG("set_par(%d)\n", FB2OFB(fbi)->id); ++ ++ set_fb_fix(fbi); ++ r = omapfb_apply_changes(fbi, 0); ++ ++ return r; ++} ++ ++static int omapfb_pan_display(struct fb_var_screeninfo *var, ++ struct fb_info *fbi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ int r = 0; ++ ++ DBG("pan_display(%d)\n", ofbi->id); ++ ++ omapfb_lock(fbdev); ++ ++ if (var->xoffset != fbi->var.xoffset || ++ var->yoffset != fbi->var.yoffset) { ++ struct fb_var_screeninfo new_var; ++ ++ new_var = fbi->var; ++ new_var.xoffset = var->xoffset; ++ new_var.yoffset = var->yoffset; ++ ++ r = check_fb_var(fbi, &new_var); ++ ++ if (r == 0) { ++ fbi->var = new_var; ++ set_fb_fix(fbi); ++ r = omapfb_apply_changes(fbi, 0); ++ } ++ } ++ ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++static void mmap_user_open(struct vm_area_struct *vma) ++{ ++ struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data; ++ ++ atomic_inc(&ofbi->map_count); ++} ++ ++static void mmap_user_close(struct vm_area_struct *vma) ++{ ++ struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data; ++ ++ atomic_dec(&ofbi->map_count); ++} ++ ++static struct vm_operations_struct mmap_user_ops = { ++ .open = mmap_user_open, ++ .close = mmap_user_close, ++}; ++ ++static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct fb_fix_screeninfo *fix = &fbi->fix; ++ unsigned long off; ++ unsigned long start; ++ u32 len; ++ ++ if (vma->vm_end - vma->vm_start == 0) ++ return 0; ++ if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) ++ return -EINVAL; ++ off = vma->vm_pgoff << PAGE_SHIFT; ++ ++ start = omapfb_get_region_paddr(ofbi); ++ len = fix->smem_len; ++ if (off >= len) ++ return -EINVAL; ++ if ((vma->vm_end - vma->vm_start + off) > len) ++ return -EINVAL; ++ ++ off += start; ++ ++ DBG("user mmap region start %lx, len %d, off %lx\n", start, len, off); ++ ++ vma->vm_pgoff = off >> PAGE_SHIFT; ++ vma->vm_flags |= VM_IO | VM_RESERVED; ++ vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); ++ vma->vm_ops = &mmap_user_ops; ++ vma->vm_private_data = ofbi; ++ if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT, ++ vma->vm_end - vma->vm_start, vma->vm_page_prot)) ++ return -EAGAIN; ++ /* vm_ops.open won't be called for mmap itself. */ ++ atomic_inc(&ofbi->map_count); ++ return 0; ++} ++ ++/* Store a single color palette entry into a pseudo palette or the hardware ++ * palette if one is available. For now we support only 16bpp and thus store ++ * the entry only to the pseudo palette. ++ */ ++static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green, ++ u_int blue, u_int transp, int update_hw_pal) ++{ ++ /*struct omapfb_info *ofbi = FB2OFB(fbi);*/ ++ /*struct omapfb2_device *fbdev = ofbi->fbdev;*/ ++ struct fb_var_screeninfo *var = &fbi->var; ++ int r = 0; ++ ++ enum omapfb_color_format mode = OMAPFB_COLOR_RGB24U; /* XXX */ ++ ++ /*switch (plane->color_mode) {*/ ++ switch (mode) { ++ case OMAPFB_COLOR_YUV422: ++ case OMAPFB_COLOR_YUV420: ++ case OMAPFB_COLOR_YUY422: ++ r = -EINVAL; ++ break; ++ case OMAPFB_COLOR_CLUT_8BPP: ++ case OMAPFB_COLOR_CLUT_4BPP: ++ case OMAPFB_COLOR_CLUT_2BPP: ++ case OMAPFB_COLOR_CLUT_1BPP: ++ /* ++ if (fbdev->ctrl->setcolreg) ++ r = fbdev->ctrl->setcolreg(regno, red, green, blue, ++ transp, update_hw_pal); ++ */ ++ /* Fallthrough */ ++ r = -EINVAL; ++ break; ++ case OMAPFB_COLOR_RGB565: ++ case OMAPFB_COLOR_RGB444: ++ case OMAPFB_COLOR_RGB24P: ++ case OMAPFB_COLOR_RGB24U: ++ if (r != 0) ++ break; ++ ++ if (regno < 0) { ++ r = -EINVAL; ++ break; ++ } ++ ++ if (regno < 16) { ++ u16 pal; ++ pal = ((red >> (16 - var->red.length)) << ++ var->red.offset) | ++ ((green >> (16 - var->green.length)) << ++ var->green.offset) | ++ (blue >> (16 - var->blue.length)); ++ ((u32 *)(fbi->pseudo_palette))[regno] = pal; ++ } ++ break; ++ default: ++ BUG(); ++ } ++ return r; ++} ++ ++static int omapfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, ++ u_int transp, struct fb_info *info) ++{ ++ DBG("setcolreg\n"); ++ ++ return _setcolreg(info, regno, red, green, blue, transp, 1); ++} ++ ++static int omapfb_setcmap(struct fb_cmap *cmap, struct fb_info *info) ++{ ++ int count, index, r; ++ u16 *red, *green, *blue, *transp; ++ u16 trans = 0xffff; ++ ++ DBG("setcmap\n"); ++ ++ red = cmap->red; ++ green = cmap->green; ++ blue = cmap->blue; ++ transp = cmap->transp; ++ index = cmap->start; ++ ++ for (count = 0; count < cmap->len; count++) { ++ if (transp) ++ trans = *transp++; ++ r = _setcolreg(info, index++, *red++, *green++, *blue++, trans, ++ count == cmap->len - 1); ++ if (r != 0) ++ return r; ++ } ++ ++ return 0; ++} ++ ++static int omapfb_blank(int blank, struct fb_info *fbi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ int do_update = 0; ++ int r = 0; ++ ++ omapfb_lock(fbdev); ++ ++ switch (blank) { ++ case FB_BLANK_UNBLANK: ++ if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) ++ goto exit; ++ ++ if (display->resume) ++ r = display->resume(display); ++ ++ if (r == 0 && display->get_update_mode && ++ display->get_update_mode(display) == ++ OMAP_DSS_UPDATE_MANUAL) ++ do_update = 1; ++ ++ break; ++ ++ case FB_BLANK_NORMAL: ++ /* FB_BLANK_NORMAL could be implemented. ++ * Needs DSS additions. */ ++ case FB_BLANK_VSYNC_SUSPEND: ++ case FB_BLANK_HSYNC_SUSPEND: ++ case FB_BLANK_POWERDOWN: ++ if (display->state != OMAP_DSS_DISPLAY_ACTIVE) ++ goto exit; ++ ++ if (display->suspend) ++ r = display->suspend(display); ++ ++ break; ++ ++ default: ++ r = -EINVAL; ++ } ++ ++exit: ++ omapfb_unlock(fbdev); ++ ++ if (r == 0 && do_update && display->update) { ++ u16 w, h; ++ display->get_resolution(display, &w, &h); ++ ++ r = display->update(display, 0, 0, w, h); ++ } ++ ++ return r; ++} ++ ++#if 0 ++/* XXX fb_read and fb_write are needed for VRFB */ ++ssize_t omapfb_write(struct fb_info *info, const char __user *buf, ++ size_t count, loff_t *ppos) ++{ ++ DBG("omapfb_write %d, %lu\n", count, (unsigned long)*ppos); ++ // XXX needed for VRFB ++ return count; ++} ++#endif ++ ++static struct fb_ops omapfb_ops = { ++ .owner = THIS_MODULE, ++ .fb_open = omapfb_open, ++ .fb_release = omapfb_release, ++ .fb_fillrect = cfb_fillrect, ++ .fb_copyarea = cfb_copyarea, ++ .fb_imageblit = cfb_imageblit, ++ .fb_blank = omapfb_blank, ++ .fb_ioctl = omapfb_ioctl, ++ .fb_check_var = omapfb_check_var, ++ .fb_set_par = omapfb_set_par, ++ .fb_pan_display = omapfb_pan_display, ++ .fb_mmap = omapfb_mmap, ++ .fb_setcolreg = omapfb_setcolreg, ++ .fb_setcmap = omapfb_setcmap, ++ //.fb_write = omapfb_write, ++}; ++ ++static void omapfb_free_fbmem(struct fb_info *fbi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omapfb2_mem_region *rg; ++ ++ rg = &ofbi->region; ++ ++ if (rg->paddr) ++ if (omap_vram_free(rg->paddr, rg->size)) ++ dev_err(fbdev->dev, "VRAM FREE failed\n"); ++ ++ if (rg->vaddr) ++ iounmap(rg->vaddr); ++ ++ if (ofbi->rotation_type == OMAPFB_ROT_VRFB) { ++ /* unmap the 0 angle rotation */ ++ if (rg->vrfb.vaddr[0]) { ++ iounmap(rg->vrfb.vaddr[0]); ++ omap_vrfb_release_ctx(&rg->vrfb); ++ } ++ } ++ ++ rg->vaddr = NULL; ++ rg->paddr = 0; ++ rg->alloc = 0; ++ rg->size = 0; ++} ++ ++static int omapfb_free_all_fbmem(struct omapfb2_device *fbdev) ++{ ++ int i; ++ ++ DBG("free all fbmem\n"); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct fb_info *fbi = fbdev->fbs[i]; ++ omapfb_free_fbmem(fbi); ++ memset(&fbi->fix, 0, sizeof(fbi->fix)); ++ memset(&fbi->var, 0, sizeof(fbi->var)); ++ } ++ ++ return 0; ++} ++ ++static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size, ++ unsigned long paddr) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omapfb2_mem_region *rg; ++ void __iomem *vaddr; ++ int r; ++ int clear = 0; ++ ++ rg = &ofbi->region; ++ memset(rg, 0, sizeof(*rg)); ++ ++ size = PAGE_ALIGN(size); ++ ++ if (!paddr) { ++ DBG("allocating %lu bytes for fb %d\n", size, ofbi->id); ++ r = omap_vram_alloc(OMAPFB_MEMTYPE_SDRAM, size, &paddr); ++ clear = 1; ++ } else { ++ DBG("reserving %lu bytes at %lx for fb %d\n", size, paddr, ++ ofbi->id); ++ r = omap_vram_reserve(paddr, size); ++ } ++ ++ if (r) { ++ dev_err(fbdev->dev, "failed to allocate framebuffer\n"); ++ return -ENOMEM; ++ } ++ ++ if (ofbi->rotation_type != OMAPFB_ROT_VRFB) { ++ vaddr = ioremap_wc(paddr, size); ++ ++ if (!vaddr) { ++ dev_err(fbdev->dev, "failed to ioremap framebuffer\n"); ++ omap_vram_free(paddr, size); ++ return -ENOMEM; ++ } ++ ++ DBG("allocated VRAM paddr %lx, vaddr %p\n", paddr, vaddr); ++ ++ if (clear) ++ memset_io(vaddr, 0, size); ++ } else { ++ void __iomem *va; ++ ++ r = omap_vrfb_request_ctx(&rg->vrfb); ++ if (r) { ++ dev_err(fbdev->dev, "vrfb create ctx failed\n"); ++ return r; ++ } ++ ++ /* only ioremap the 0 angle view */ ++ va = ioremap_wc(rg->vrfb.paddr[0], size); ++ ++ if(!va) { ++ printk(KERN_ERR "vrfb: ioremap failed\n"); ++ return -ENOMEM; ++ } ++ ++ DBG("ioremapped vrfb area 0 to %p\n", va); ++ ++ rg->vrfb.vaddr[0] = va; ++ ++ vaddr = NULL; ++ ++ if (clear) ++ memset_io(va, 0, size); ++ } ++ ++ rg->paddr = paddr; ++ rg->vaddr = vaddr; ++ rg->size = size; ++ rg->alloc = 1; ++ ++ return 0; ++} ++ ++/* allocate fbmem using display resolution as reference */ ++static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size, ++ unsigned long paddr) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omap_display *display; ++ int bytespp; ++ ++ display = fb2display(fbi); ++ ++ if (!display) ++ return 0; ++ ++ switch (display->get_recommended_bpp(display)) { ++ case 16: ++ bytespp = 2; ++ break; ++ case 24: ++ bytespp = 4; ++ break; ++ default: ++ bytespp = 4; ++ break; ++ } ++ ++ if (!size) { ++ u16 w, h; ++ ++ display->get_resolution(display, &w, &h); ++ ++ if (ofbi->rotation_type == OMAPFB_ROT_VRFB) { ++ int oldw = w, oldh = h; ++ ++ omap_vrfb_adjust_size(&w, &h, bytespp); ++ ++ /* Because we change the resolution of the 0 degree view, ++ * we need to alloc max(w, h) for height */ ++ h = max(w, h); ++ w = OMAP_VRFB_LINE_LEN; ++ ++ DBG("adjusting fb mem size for VRFB, %dx%d -> %dx%d\n", ++ oldw, oldh, w, h); ++ } ++ ++ size = w * h * bytespp; ++ } ++ ++ return omapfb_alloc_fbmem(fbi, size, paddr); ++} ++ ++static int omapfb_parse_vram_param(const char *param, int max_entries, ++ unsigned long *sizes, unsigned long *paddrs) ++{ ++ int fbnum; ++ unsigned long size; ++ unsigned long paddr = 0; ++ char *p, *start; ++ ++ start = (char *)param; ++ ++ while (1) { ++ p = start; ++ ++ fbnum = simple_strtoul(p, &p, 10); ++ ++ if (p == param) ++ return -EINVAL; ++ ++ if (*p != ':') ++ return -EINVAL; ++ ++ if (fbnum >= max_entries) ++ return -EINVAL; ++ ++ size = memparse(p + 1, &p); ++ ++ if (!size) ++ return -EINVAL; ++ ++ paddr = 0; ++ ++ if (*p == '@') { ++ paddr = simple_strtoul(p + 1, &p, 16); ++ ++ if (!paddr) ++ return -EINVAL; ++ ++ } ++ ++ paddrs[fbnum] = paddr; ++ sizes[fbnum] = size; ++ ++ if (*p == 0) ++ break; ++ ++ if (*p != ',') ++ return -EINVAL; ++ ++ ++p; ++ ++ start = p; ++ } ++ ++ return 0; ++} ++ ++static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev) ++{ ++ int i, r; ++ unsigned long vram_sizes[10]; ++ unsigned long vram_paddrs[10]; ++ ++ memset(&vram_sizes, 0, sizeof(vram_sizes)); ++ memset(&vram_paddrs, 0, sizeof(vram_paddrs)); ++ ++ if (def_vram && omapfb_parse_vram_param(def_vram, 10, ++ vram_sizes, vram_paddrs)) { ++ dev_err(fbdev->dev, "failed to parse vram parameter\n"); ++ ++ memset(&vram_sizes, 0, sizeof(vram_sizes)); ++ memset(&vram_paddrs, 0, sizeof(vram_paddrs)); ++ } ++ ++ if (fbdev->dev->platform_data) { ++ struct omapfb_platform_data *opd; ++ opd = fbdev->dev->platform_data; ++ for (i = 0; i < opd->mem_desc.region_cnt; ++i) { ++ if (!vram_sizes[i]) { ++ unsigned long size; ++ unsigned long paddr; ++ ++ size = opd->mem_desc.region[i].size; ++ paddr = opd->mem_desc.region[i].paddr; ++ ++ vram_sizes[i] = size; ++ vram_paddrs[i] = paddr; ++ } ++ } ++ } ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ /* allocate memory automatically only for fb0, or if ++ * excplicitly defined with vram or plat data option */ ++ if (i == 0 || vram_sizes[i] != 0) { ++ r = omapfb_alloc_fbmem_display(fbdev->fbs[i], ++ vram_sizes[i], vram_paddrs[i]); ++ ++ if (r) ++ return r; ++ } ++ } ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); ++ struct omapfb2_mem_region *rg; ++ rg = &ofbi->region; ++ ++ DBG("region%d phys %08x virt %p size=%lu\n", ++ i, ++ rg->paddr, ++ rg->vaddr, ++ rg->size); ++ } ++ ++ return 0; ++} ++ ++int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_display *display = fb2display(fbi); ++ struct omapfb2_mem_region *rg = &ofbi->region; ++ unsigned long old_size = rg->size; ++ unsigned long old_paddr = rg->paddr; ++ int old_type = rg->type; ++ int r; ++ ++ if (type > OMAPFB_MEMTYPE_MAX) ++ return -EINVAL; ++ ++ size = PAGE_ALIGN(size); ++ ++ if (old_size == size && old_type == type) ++ return 0; ++ ++ if (display && display->sync) ++ display->sync(display); ++ ++ omapfb_free_fbmem(fbi); ++ ++ if (size == 0) { ++ memset(&fbi->fix, 0, sizeof(fbi->fix)); ++ memset(&fbi->var, 0, sizeof(fbi->var)); ++ return 0; ++ } ++ ++ r = omapfb_alloc_fbmem(fbi, size, 0); ++ ++ if (r) { ++ if (old_size) ++ omapfb_alloc_fbmem(fbi, old_size, old_paddr); ++ ++ if (rg->size == 0) { ++ memset(&fbi->fix, 0, sizeof(fbi->fix)); ++ memset(&fbi->var, 0, sizeof(fbi->var)); ++ } ++ ++ return r; ++ } ++ ++ if (old_size == size) ++ return 0; ++ ++ if (old_size == 0) { ++ DBG("initializing fb %d\n", ofbi->id); ++ r = omapfb_fb_init(fbdev, fbi); ++ if (r) { ++ DBG("omapfb_fb_init failed\n"); ++ goto err; ++ } ++ r = omapfb_apply_changes(fbi, 1); ++ if (r) { ++ DBG("omapfb_apply_changes failed\n"); ++ goto err; ++ } ++ } else { ++ struct fb_var_screeninfo new_var; ++ memcpy(&new_var, &fbi->var, sizeof(new_var)); ++ r = check_fb_var(fbi, &new_var); ++ if (r) ++ goto err; ++ memcpy(&fbi->var, &new_var, sizeof(fbi->var)); ++ set_fb_fix(fbi); ++ } ++ ++ return 0; ++err: ++ omapfb_free_fbmem(fbi); ++ memset(&fbi->fix, 0, sizeof(fbi->fix)); ++ memset(&fbi->var, 0, sizeof(fbi->var)); ++ return r; ++} ++ ++/* initialize fb_info, var, fix to something sane based on the display */ ++int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi) ++{ ++ struct fb_var_screeninfo *var = &fbi->var; ++ struct fb_fix_screeninfo *fix = &fbi->fix; ++ struct omap_display *display = fb2display(fbi); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ int r = 0; ++ ++ fbi->fbops = &omapfb_ops; ++ fbi->flags = FBINFO_FLAG_DEFAULT; ++ fbi->pseudo_palette = fbdev->pseudo_palette; ++ ++ strncpy(fix->id, MODULE_NAME, sizeof(fix->id)); ++ ++ if (ofbi->region.size == 0) { ++ memset(&fbi->fix, 0, sizeof(fbi->fix)); ++ memset(&fbi->var, 0, sizeof(fbi->var)); ++ return 0; ++ } ++ ++ var->nonstd = 0; ++ ++ var->rotate = ofbi->rotation; ++ ++ if (display) { ++ u16 w, h; ++ display->get_resolution(display, &w, &h); ++ ++ if (ofbi->rotation == FB_ROTATE_CW || ++ ofbi->rotation == FB_ROTATE_CCW) { ++ var->xres = h; ++ var->yres = w; ++ } else { ++ var->xres = w; ++ var->yres = h; ++ } ++ ++ var->xres_virtual = var->xres; ++ var->yres_virtual = var->yres; ++ ++ switch (display->get_recommended_bpp(display)) { ++ case 16: ++ var->bits_per_pixel = 16; ++ break; ++ case 24: ++ var->bits_per_pixel = 32; ++ break; ++ default: ++ dev_err(fbdev->dev, "illegal display bpp\n"); ++ return -EINVAL; ++ } ++ } else { ++ /* if there's no display, let's just guess some basic values */ ++ var->xres = 320; ++ var->yres = 240; ++ var->xres_virtual = var->xres; ++ var->yres_virtual = var->yres; ++ var->bits_per_pixel = 16; ++ } ++ ++ r = check_fb_var(fbi, var); ++ if (r) ++ goto err; ++ ++ set_fb_fix(fbi); ++err: ++ return r; ++} ++ ++static void fbinfo_cleanup(struct omapfb2_device *fbdev, struct fb_info *fbi) ++{ ++ fb_dealloc_cmap(&fbi->cmap); ++} ++ ++ ++static void omapfb_free_resources(struct omapfb2_device *fbdev) ++{ ++ int i; ++ ++ DBG("free_resources\n"); ++ ++ if (fbdev == NULL) ++ return; ++ ++ for (i = 0; i < fbdev->num_fbs; i++) ++ unregister_framebuffer(fbdev->fbs[i]); ++ ++ /* free the reserved fbmem */ ++ omapfb_free_all_fbmem(fbdev); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ fbinfo_cleanup(fbdev, fbdev->fbs[i]); ++ framebuffer_release(fbdev->fbs[i]); ++ } ++ ++ for (i = 0; i < fbdev->num_displays; i++) { ++ if (fbdev->displays[i]->state != OMAP_DSS_DISPLAY_DISABLED) ++ fbdev->displays[i]->disable(fbdev->displays[i]); ++ ++ omap_dss_put_display(fbdev->displays[i]); ++ } ++ ++ dev_set_drvdata(fbdev->dev, NULL); ++ kfree(fbdev); ++} ++ ++static int omapfb_create_framebuffers(struct omapfb2_device *fbdev) ++{ ++ int r, i; ++ ++ fbdev->num_fbs = 0; ++ ++ DBG("create %d framebuffers\n", CONFIG_FB_OMAP2_NUM_FBS); ++ ++ /* allocate fb_infos */ ++ for (i = 0; i < CONFIG_FB_OMAP2_NUM_FBS; i++) { ++ struct fb_info *fbi; ++ struct omapfb_info *ofbi; ++ ++ fbi = framebuffer_alloc(sizeof(struct omapfb_info), ++ fbdev->dev); ++ ++ if (fbi == NULL) { ++ dev_err(fbdev->dev, ++ "unable to allocate memory for plane info\n"); ++ return -ENOMEM; ++ } ++ ++ fbdev->fbs[i] = fbi; ++ ++ ofbi = FB2OFB(fbi); ++ ofbi->fbdev = fbdev; ++ ofbi->id = i; ++ ++ /* assign these early, so that fb alloc can use them */ ++ ofbi->rotation_type = def_vrfb ? OMAPFB_ROT_VRFB : ++ OMAPFB_ROT_DMA; ++ ofbi->rotation = def_rotate; ++ ofbi->mirror = def_mirror; ++ ++ fbdev->num_fbs++; ++ } ++ ++ DBG("fb_infos allocated\n"); ++ ++ /* assign overlays for the fbs */ ++ for (i = 0; i < min(fbdev->num_fbs, fbdev->num_overlays); i++) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); ++ ++ ofbi->overlays[0] = fbdev->overlays[i]; ++ ofbi->num_overlays = 1; ++ } ++ ++ /* allocate fb memories */ ++ r = omapfb_allocate_all_fbs(fbdev); ++ if (r) { ++ dev_err(fbdev->dev, "failed to allocate fbmem\n"); ++ return r; ++ } ++ ++ DBG("fbmems allocated\n"); ++ ++ /* setup fb_infos */ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ r = omapfb_fb_init(fbdev, fbdev->fbs[i]); ++ if (r) { ++ dev_err(fbdev->dev, "failed to setup fb_info\n"); ++ return r; ++ } ++ } ++ ++ DBG("fb_infos initialized\n"); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ r = register_framebuffer(fbdev->fbs[i]); ++ if (r != 0) { ++ dev_err(fbdev->dev, ++ "registering framebuffer %d failed\n", i); ++ return r; ++ } ++ } ++ ++ DBG("framebuffers registered\n"); ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ r = omapfb_apply_changes(fbdev->fbs[i], 1); ++ if (r) { ++ dev_err(fbdev->dev, "failed to change mode\n"); ++ return r; ++ } ++ } ++ ++ DBG("create sysfs for fbs\n"); ++ r = omapfb_create_sysfs(fbdev); ++ if (r) { ++ dev_err(fbdev->dev, "failed to create sysfs entries\n"); ++ return r; ++ } ++ ++ /* Enable fb0 */ ++ if (fbdev->num_fbs > 0) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]); ++ ++ if (ofbi->num_overlays > 0 ) { ++ struct omap_overlay *ovl = ofbi->overlays[0]; ++ ++ r = omapfb_overlay_enable(ovl, 1); ++ ++ if (r) { ++ dev_err(fbdev->dev, ++ "failed to enable overlay\n"); ++ return r; ++ } ++ } ++ } ++ ++ DBG("create_framebuffers done\n"); ++ ++ return 0; ++} ++ ++int omapfb_mode_to_timings(const char *mode_str, ++ struct omap_video_timings *timings, u8 *bpp) ++{ ++ struct fb_info fbi; ++ struct fb_var_screeninfo var; ++ struct fb_ops fbops; ++ int r; ++ ++#ifdef CONFIG_OMAP2_DSS_VENC ++ if (strcmp(mode_str, "pal") == 0) { ++ *timings = omap_dss_pal_timings; ++ *bpp = 0; ++ return 0; ++ } else if (strcmp(mode_str, "ntsc") == 0) { ++ *timings = omap_dss_ntsc_timings; ++ *bpp = 0; ++ return 0; ++ } ++#endif ++ ++ /* this is quite a hack, but I wanted to use the modedb and for ++ * that we need fb_info and var, so we create dummy ones */ ++ ++ memset(&fbi, 0, sizeof(fbi)); ++ memset(&var, 0, sizeof(var)); ++ memset(&fbops, 0, sizeof(fbops)); ++ fbi.fbops = &fbops; ++ ++ r = fb_find_mode(&var, &fbi, mode_str, NULL, 0, NULL, 24); ++ ++ if (r != 0) { ++ timings->pixel_clock = PICOS2KHZ(var.pixclock); ++ timings->hfp = var.left_margin; ++ timings->hbp = var.right_margin; ++ timings->vfp = var.upper_margin; ++ timings->vbp = var.lower_margin; ++ timings->hsw = var.hsync_len; ++ timings->vsw = var.vsync_len; ++ timings->x_res = var.xres; ++ timings->y_res = var.yres; ++ ++ switch (var.bits_per_pixel) { ++ case 16: ++ *bpp = 16; ++ break; ++ case 24: ++ case 32: ++ default: ++ *bpp = 24; ++ break; ++ } ++ ++ return 0; ++ } else { ++ return -EINVAL; ++ } ++} ++ ++static int omapfb_set_def_mode(struct omap_display *display, char *mode_str) ++{ ++ int r; ++ u8 bpp; ++ struct omap_video_timings timings; ++ ++ r = omapfb_mode_to_timings(mode_str, &timings, &bpp); ++ if (r) ++ return r; ++ ++ display->panel->recommended_bpp = bpp; ++ ++ if (!display->check_timings || !display->set_timings) ++ return -EINVAL; ++ ++ r = display->check_timings(display, &timings); ++ if (r) ++ return r; ++ ++ display->set_timings(display, &timings); ++ ++ return 0; ++} ++ ++static int omapfb_parse_def_modes(struct omapfb2_device *fbdev) ++{ ++ char *str, *options, *this_opt; ++ int r = 0; ++ ++ str = kmalloc(strlen(def_mode) + 1, GFP_KERNEL); ++ strcpy(str, def_mode); ++ options = str; ++ ++ while (!r && (this_opt = strsep(&options, ",")) != NULL) { ++ char *p, *display_str, *mode_str; ++ struct omap_display *display; ++ int i; ++ ++ p = strchr(this_opt, ':'); ++ if (!p) { ++ r = -EINVAL; ++ break; ++ } ++ ++ *p = 0; ++ display_str = this_opt; ++ mode_str = p + 1; ++ ++ display = NULL; ++ for (i = 0; i < fbdev->num_displays; ++i) { ++ if (strcmp(fbdev->displays[i]->name, ++ display_str) == 0) { ++ display = fbdev->displays[i]; ++ break; ++ } ++ } ++ ++ if (!display) { ++ r = -EINVAL; ++ break; ++ } ++ ++ r = omapfb_set_def_mode(display, mode_str); ++ if (r) ++ break; ++ } ++ ++ kfree(str); ++ ++ return r; ++} ++ ++static int omapfb_probe(struct platform_device *pdev) ++{ ++ struct omapfb2_device *fbdev = NULL; ++ int r = 0; ++ int i, t; ++ struct omap_overlay *ovl; ++ struct omap_display *def_display; ++ ++ DBG("omapfb_probe\n"); ++ ++ if (pdev->num_resources != 0) { ++ dev_err(&pdev->dev, "probed for an unknown device\n"); ++ r = -ENODEV; ++ goto err0; ++ } ++ ++ fbdev = kzalloc(sizeof(struct omapfb2_device), GFP_KERNEL); ++ if (fbdev == NULL) { ++ r = -ENOMEM; ++ goto err0; ++ } ++ ++ mutex_init(&fbdev->mtx); ++ ++ fbdev->dev = &pdev->dev; ++ platform_set_drvdata(pdev, fbdev); ++ ++ fbdev->num_displays = 0; ++ t = omap_dss_get_num_displays(); ++ for (i = 0; i < t; i++) { ++ struct omap_display *display; ++ display = omap_dss_get_display(i); ++ if (!display) { ++ dev_err(&pdev->dev, "can't get display %d\n", i); ++ r = -EINVAL; ++ goto cleanup; ++ } ++ ++ fbdev->displays[fbdev->num_displays++] = display; ++ } ++ ++ if (fbdev->num_displays == 0) { ++ dev_err(&pdev->dev, "no displays\n"); ++ r = -EINVAL; ++ goto cleanup; ++ } ++ ++ fbdev->num_overlays = omap_dss_get_num_overlays(); ++ for (i = 0; i < fbdev->num_overlays; i++) ++ fbdev->overlays[i] = omap_dss_get_overlay(i); ++ ++ fbdev->num_managers = omap_dss_get_num_overlay_managers(); ++ for (i = 0; i < fbdev->num_managers; i++) ++ fbdev->managers[i] = omap_dss_get_overlay_manager(i); ++ ++ ++ /* gfx overlay should be the default one. find a display ++ * connected to that, and use it as default display */ ++ ovl = omap_dss_get_overlay(0); ++ if (ovl->manager && ovl->manager->display) { ++ def_display = ovl->manager->display; ++ } else { ++ dev_err(&pdev->dev, "cannot find default display\n"); ++ r = -EINVAL; ++ goto cleanup; ++ } ++ ++ if (def_mode && strlen(def_mode) > 0) { ++ if (omapfb_parse_def_modes(fbdev)) ++ dev_err(&pdev->dev, "cannot parse default modes\n"); ++ } ++ ++ r = omapfb_create_framebuffers(fbdev); ++ if (r) ++ goto cleanup; ++ ++ for (i = 0; i < fbdev->num_managers; i++) { ++ struct omap_overlay_manager *mgr; ++ mgr = fbdev->managers[i]; ++ r = mgr->apply(mgr); ++ if (r) { ++ dev_err(fbdev->dev, "failed to apply dispc config\n"); ++ goto cleanup; ++ } ++ } ++ ++ DBG("mgr->apply'ed\n"); ++ ++ r = def_display->enable(def_display); ++ if (r) { ++ dev_err(fbdev->dev, "Failed to enable display '%s'\n", ++ def_display->name); ++ goto cleanup; ++ } ++ ++ /* set the update mode */ ++ if (def_display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { ++#ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE ++ if (def_display->set_update_mode) ++ def_display->set_update_mode(def_display, ++ OMAP_DSS_UPDATE_AUTO); ++ if (def_display->enable_te) ++ def_display->enable_te(def_display, 1); ++#else ++ if (def_display->set_update_mode) ++ def_display->set_update_mode(def_display, ++ OMAP_DSS_UPDATE_MANUAL); ++ if (def_display->enable_te) ++ def_display->enable_te(def_display, 0); ++#endif ++ } else { ++ if (def_display->set_update_mode) ++ def_display->set_update_mode(def_display, ++ OMAP_DSS_UPDATE_AUTO); ++ } ++ ++ for (i = 0; i < fbdev->num_displays; i++) { ++ struct omap_display *display = fbdev->displays[i]; ++ u16 w, h; ++ ++ if (!display->get_update_mode || !display->update) ++ continue; ++ ++ if (display->get_update_mode(display) == ++ OMAP_DSS_UPDATE_MANUAL) { ++ ++ display->get_resolution(display, &w, &h); ++ display->update(display, 0, 0, w, h); ++ } ++ } ++ ++ DBG("display->updated\n"); ++ ++ return 0; ++ ++cleanup: ++ omapfb_free_resources(fbdev); ++err0: ++ dev_err(&pdev->dev, "failed to setup omapfb\n"); ++ return r; ++} ++ ++static int omapfb_remove(struct platform_device *pdev) ++{ ++ struct omapfb2_device *fbdev = platform_get_drvdata(pdev); ++ ++ /* FIXME: wait till completion of pending events */ ++ ++ omapfb_remove_sysfs(fbdev); ++ ++ omapfb_free_resources(fbdev); ++ ++ return 0; ++} ++ ++static struct platform_driver omapfb_driver = { ++ .probe = omapfb_probe, ++ .remove = omapfb_remove, ++ .driver = { ++ .name = "omapfb", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init omapfb_init(void) ++{ ++ DBG("omapfb_init\n"); ++ ++ if (platform_driver_register(&omapfb_driver)) { ++ printk(KERN_ERR "failed to register omapfb driver\n"); ++ return -ENODEV; ++ } ++ ++ return 0; ++} ++ ++static void __exit omapfb_exit(void) ++{ ++ DBG("omapfb_exit\n"); ++ platform_driver_unregister(&omapfb_driver); ++} ++ ++module_param_named(mode, def_mode, charp, 0); ++module_param_named(vram, def_vram, charp, 0); ++module_param_named(rotate, def_rotate, int, 0); ++module_param_named(vrfb, def_vrfb, bool, 0); ++module_param_named(mirror, def_mirror, bool, 0); ++ ++/* late_initcall to let panel/ctrl drivers loaded first. ++ * I guess better option would be a more dynamic approach, ++ * so that omapfb reacts to new panels when they are loaded */ ++late_initcall(omapfb_init); ++/*module_init(omapfb_init);*/ ++module_exit(omapfb_exit); ++ ++MODULE_AUTHOR("Tomi Valkeinen "); ++MODULE_DESCRIPTION("OMAP2/3 Framebuffer"); ++MODULE_LICENSE("GPL v2"); +diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c +new file mode 100644 +index 0000000..2c88718 +--- /dev/null ++++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c +@@ -0,0 +1,371 @@ ++/* ++ * linux/drivers/video/omap2/omapfb-sysfs.c ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "omapfb.h" ++ ++static ssize_t show_rotate_type(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ ++ return snprintf(buf, PAGE_SIZE, "%d\n", ofbi->rotation_type); ++} ++ ++static ssize_t show_mirror(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ ++ return snprintf(buf, PAGE_SIZE, "%d\n", ofbi->mirror); ++} ++ ++static ssize_t store_mirror(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ bool mirror; ++ int r; ++ struct fb_var_screeninfo new_var; ++ ++ mirror = simple_strtoul(buf, NULL, 0); ++ ++ if (mirror != 0 && mirror != 1) ++ return -EINVAL; ++ ++ omapfb_lock(fbdev); ++ ++ ofbi->mirror = mirror; ++ ++ memcpy(&new_var, &fbi->var, sizeof(new_var)); ++ r = check_fb_var(fbi, &new_var); ++ if (r) ++ goto out; ++ memcpy(&fbi->var, &new_var, sizeof(fbi->var)); ++ ++ set_fb_fix(fbi); ++ ++ r = omapfb_apply_changes(fbi, 0); ++ if (r) ++ goto out; ++ ++ r = count; ++out: ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++static ssize_t show_overlays(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ ssize_t l = 0; ++ int t; ++ ++ for (t = 0; t < ofbi->num_overlays; t++) { ++ struct omap_overlay *ovl = ofbi->overlays[t]; ++ int ovlnum; ++ ++ for (ovlnum = 0; ovlnum < fbdev->num_overlays; ++ovlnum) ++ if (ovl == fbdev->overlays[ovlnum]) ++ break; ++ ++ l += snprintf(buf + l, PAGE_SIZE - l, "%s%d", ++ t == 0 ? "" : ",", ovlnum); ++ } ++ ++ l += snprintf(buf + l, PAGE_SIZE - l, "\n"); ++ ++ return l; ++} ++ ++static struct omapfb_info *get_overlay_fb(struct omapfb2_device *fbdev, ++ struct omap_overlay *ovl) ++{ ++ int i, t; ++ ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]); ++ ++ for (t = 0; t < ofbi->num_overlays; t++) { ++ if (ofbi->overlays[t] == ovl) ++ return ofbi; ++ } ++ } ++ ++ return NULL; ++} ++ ++static ssize_t store_overlays(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ struct omap_overlay *ovls[OMAPFB_MAX_OVL_PER_FB]; ++ struct omap_overlay *ovl; ++ int num_ovls, r, i; ++ int len; ++ ++ num_ovls = 0; ++ ++ len = strlen(buf); ++ if (buf[len - 1] == '\n') ++ len = len - 1; ++ ++ omapfb_lock(fbdev); ++ ++ if (len > 0) { ++ char *p = (char *)buf; ++ int ovlnum; ++ ++ while (p < buf + len) { ++ int found; ++ if (num_ovls == OMAPFB_MAX_OVL_PER_FB) { ++ r = -EINVAL; ++ goto out; ++ } ++ ++ ovlnum = simple_strtoul(p, &p, 0); ++ if (ovlnum > fbdev->num_overlays) { ++ r = -EINVAL; ++ goto out; ++ } ++ ++ found = 0; ++ for (i = 0; i < num_ovls; ++i) { ++ if (ovls[i] == fbdev->overlays[ovlnum]) { ++ found = 1; ++ break; ++ } ++ } ++ ++ if (!found) ++ ovls[num_ovls++] = fbdev->overlays[ovlnum]; ++ ++ p++; ++ } ++ } ++ ++ for (i = 0; i < num_ovls; ++i) { ++ struct omapfb_info *ofbi2 = get_overlay_fb(fbdev, ovls[i]); ++ if (ofbi2 && ofbi2 != ofbi) { ++ dev_err(fbdev->dev, "overlay already in use\n"); ++ r = -EINVAL; ++ goto out; ++ } ++ } ++ ++ /* detach unused overlays */ ++ for (i = 0; i < ofbi->num_overlays; ++i) { ++ int t, found; ++ ++ ovl = ofbi->overlays[i]; ++ ++ found = 0; ++ ++ for (t = 0; t < num_ovls; ++t) { ++ if (ovl == ovls[t]) { ++ found = 1; ++ break; ++ } ++ } ++ ++ if (found) ++ continue; ++ ++ DBG("detaching %d\n", ofbi->overlays[i]->id); ++ ++ omapfb_overlay_enable(ovl, 0); ++ ++ if (ovl->manager) ++ ovl->manager->apply(ovl->manager); ++ ++ for (t = i + 1; t < ofbi->num_overlays; t++) ++ ofbi->overlays[t-1] = ofbi->overlays[t]; ++ ++ ofbi->num_overlays--; ++ i--; ++ } ++ ++ for (i = 0; i < num_ovls; ++i) { ++ int t, found; ++ ++ ovl = ovls[i]; ++ ++ found = 0; ++ ++ for (t = 0; t < ofbi->num_overlays; ++t) { ++ if (ovl == ofbi->overlays[t]) { ++ found = 1; ++ break; ++ } ++ } ++ ++ if (found) ++ continue; ++ ++ ofbi->overlays[ofbi->num_overlays++] = ovl; ++ ++ r = omapfb_apply_changes(fbi, 1); ++ if (r) ++ goto out; ++ ++ if (ovl->manager) { ++ r = ovl->manager->apply(ovl->manager); ++ if (r) ++ goto out; ++ } ++ } ++ ++ r = count; ++out: ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++static ssize_t show_size(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ ++ return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region.size); ++} ++ ++static ssize_t store_size(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ unsigned long size; ++ int r; ++ int i; ++ ++ size = PAGE_ALIGN(simple_strtoul(buf, NULL, 0)); ++ ++ omapfb_lock(fbdev); ++ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i]->info.enabled) { ++ r = -EBUSY; ++ goto out; ++ } ++ } ++ ++ if (size != ofbi->region.size) { ++ r = omapfb_realloc_fbmem(fbi, size, ofbi->region.type); ++ if (r) { ++ dev_err(dev, "realloc fbmem failed\n"); ++ goto out; ++ } ++ } ++ ++ r = count; ++out: ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++static ssize_t show_phys(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ ++ return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region.paddr); ++} ++ ++static ssize_t show_virt(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ ++ return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region.vaddr); ++} ++ ++static struct device_attribute omapfb_attrs[] = { ++ __ATTR(rotate_type, S_IRUGO, show_rotate_type, NULL), ++ __ATTR(mirror, S_IRUGO | S_IWUSR, show_mirror, store_mirror), ++ __ATTR(size, S_IRUGO | S_IWUSR, show_size, store_size), ++ __ATTR(overlays, S_IRUGO | S_IWUSR, show_overlays, store_overlays), ++ __ATTR(phys_addr, S_IRUGO, show_phys, NULL), ++ __ATTR(virt_addr, S_IRUGO, show_virt, NULL), ++}; ++ ++int omapfb_create_sysfs(struct omapfb2_device *fbdev) ++{ ++ int i; ++ int r; ++ ++ DBG("create sysfs for fbs\n"); ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ int t; ++ for (t = 0; t < ARRAY_SIZE(omapfb_attrs); t++) { ++ r = device_create_file(fbdev->fbs[i]->dev, ++ &omapfb_attrs[t]); ++ ++ if (r) { ++ dev_err(fbdev->dev, "failed to create sysfs file\n"); ++ return r; ++ } ++ } ++ } ++ ++ return 0; ++} ++ ++void omapfb_remove_sysfs(struct omapfb2_device *fbdev) ++{ ++ int i, t; ++ ++ DBG("remove sysfs for fbs\n"); ++ for (i = 0; i < fbdev->num_fbs; i++) { ++ for (t = 0; t < ARRAY_SIZE(omapfb_attrs); t++) ++ device_remove_file(fbdev->fbs[i]->dev, ++ &omapfb_attrs[t]); ++ } ++} ++ +diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h +new file mode 100644 +index 0000000..65e9e6e +--- /dev/null ++++ b/drivers/video/omap2/omapfb/omapfb.h +@@ -0,0 +1,153 @@ ++/* ++ * linux/drivers/video/omap2/omapfb.h ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * Some code and ideas taken from drivers/video/omap/ driver ++ * by Imre Deak. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#ifndef __DRIVERS_VIDEO_OMAP2_OMAPFB_H__ ++#define __DRIVERS_VIDEO_OMAP2_OMAPFB_H__ ++ ++#ifdef CONFIG_FB_OMAP2_DEBUG_SUPPORT ++#define DEBUG ++#endif ++ ++#ifdef DEBUG ++extern unsigned int omapfb_debug; ++#define DBG(format, ...) \ ++ if (omapfb_debug) \ ++ printk(KERN_DEBUG "OMAPFB: " format, ## __VA_ARGS__) ++#else ++#define DBG(format, ...) ++#endif ++ ++#define FB2OFB(fb_info) ((struct omapfb_info *)(fb_info->par)) ++ ++/* max number of overlays to which a framebuffer data can be direct */ ++#define OMAPFB_MAX_OVL_PER_FB 3 ++ ++struct omapfb2_mem_region { ++ u32 paddr; ++ void __iomem *vaddr; ++ struct vrfb vrfb; ++ unsigned long size; ++ u8 type; /* OMAPFB_PLANE_MEM_* */ ++ bool alloc; /* allocated by the driver */ ++ bool map; /* kernel mapped by the driver */ ++}; ++ ++enum omapfb_rotation_type { ++ OMAPFB_ROT_DMA = 0, ++ OMAPFB_ROT_VRFB = 1, ++}; ++ ++/* appended to fb_info */ ++struct omapfb_info { ++ int id; ++ struct omapfb2_mem_region region; ++ atomic_t map_count; ++ int num_overlays; ++ struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB]; ++ struct omapfb2_device *fbdev; ++ enum omapfb_rotation_type rotation_type; ++ u8 rotation; ++ bool mirror; ++}; ++ ++struct omapfb2_device { ++ struct device *dev; ++ struct mutex mtx; ++ ++ u32 pseudo_palette[17]; ++ ++ int state; ++ ++ unsigned num_fbs; ++ struct fb_info *fbs[10]; ++ ++ unsigned num_displays; ++ struct omap_display *displays[10]; ++ unsigned num_overlays; ++ struct omap_overlay *overlays[10]; ++ unsigned num_managers; ++ struct omap_overlay_manager *managers[10]; ++}; ++ ++struct omapfb_colormode { ++ enum omap_color_mode dssmode; ++ u32 bits_per_pixel; ++ u32 nonstd; ++ struct fb_bitfield red; ++ struct fb_bitfield green; ++ struct fb_bitfield blue; ++ struct fb_bitfield transp; ++}; ++ ++u32 omapfb_get_region_paddr(struct omapfb_info *ofbi); ++void __iomem *omapfb_get_region_vaddr(struct omapfb_info *ofbi); ++ ++void set_fb_fix(struct fb_info *fbi); ++int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var); ++int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type); ++int omapfb_apply_changes(struct fb_info *fbi, int init); ++int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi); ++ ++int omapfb_create_sysfs(struct omapfb2_device *fbdev); ++void omapfb_remove_sysfs(struct omapfb2_device *fbdev); ++ ++int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg); ++ ++int omapfb_mode_to_timings(const char *mode_str, ++ struct omap_video_timings *timings, u8 *bpp); ++ ++/* find the display connected to this fb, if any */ ++static inline struct omap_display *fb2display(struct fb_info *fbi) ++{ ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ int i; ++ ++ /* XXX: returns the display connected to first attached overlay */ ++ for (i = 0; i < ofbi->num_overlays; i++) { ++ if (ofbi->overlays[i]->manager) ++ return ofbi->overlays[i]->manager->display; ++ } ++ ++ return NULL; ++} ++ ++static inline void omapfb_lock(struct omapfb2_device *fbdev) ++{ ++ mutex_lock(&fbdev->mtx); ++} ++ ++static inline void omapfb_unlock(struct omapfb2_device *fbdev) ++{ ++ mutex_unlock(&fbdev->mtx); ++} ++ ++static inline int omapfb_overlay_enable(struct omap_overlay *ovl, ++ int enable) ++{ ++ struct omap_overlay_info info; ++ ++ ovl->get_overlay_info(ovl, &info); ++ info.enabled = enable; ++ return ovl->set_overlay_info(ovl, &info); ++} ++ ++#endif +diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h +index b226bdf..96190b2 100644 +--- a/include/linux/omapfb.h ++++ b/include/linux/omapfb.h +@@ -50,6 +50,8 @@ + #define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) + #define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) + #define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) ++#define OMAPFB_WAITFORVSYNC OMAP_IO(57) ++#define OMAPFB_MEMORY_READ OMAP_IOR(58, struct omapfb_memory_read) + + #define OMAPFB_CAPS_GENERIC_MASK 0x00000fff + #define OMAPFB_CAPS_LCDC_MASK 0x00fff000 +@@ -90,6 +92,13 @@ enum omapfb_color_format { + OMAPFB_COLOR_CLUT_1BPP, + OMAPFB_COLOR_RGB444, + OMAPFB_COLOR_YUY422, ++ ++ OMAPFB_COLOR_ARGB16, ++ OMAPFB_COLOR_RGB24U, /* RGB24, 32-bit container */ ++ OMAPFB_COLOR_RGB24P, /* RGB24, 24-bit container */ ++ OMAPFB_COLOR_ARGB32, ++ OMAPFB_COLOR_RGBA32, ++ OMAPFB_COLOR_RGBX32, + }; + + struct omapfb_update_window { +@@ -161,6 +170,15 @@ enum omapfb_update_mode { + OMAPFB_MANUAL_UPDATE + }; + ++struct omapfb_memory_read { ++ __u16 x; ++ __u16 y; ++ __u16 w; ++ __u16 h; ++ size_t buffer_size; ++ void __user *buffer; ++}; ++ + #ifdef __KERNEL__ + + #include +@@ -376,6 +394,8 @@ extern struct lcd_ctrl omap1_lcd_ctrl; + extern struct lcd_ctrl omap2_disp_ctrl; + #endif + ++extern void omapfb_set_platform_data(struct omapfb_platform_data *data); ++ + extern void omapfb_reserve_sdram(void); + extern void omapfb_register_panel(struct lcd_panel *panel); + extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0005-DSS2-Add-panel-drivers.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0005-DSS2-Add-panel-drivers.patch new file mode 100644 index 000000000..d12586ca2 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0005-DSS2-Add-panel-drivers.patch @@ -0,0 +1,396 @@ +From 4cc0368574f587f448231ccd121266bed4bf9729 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Thu, 2 Apr 2009 10:29:56 +0300 +Subject: [PATCH] DSS2: Add panel drivers + +- Generic panel +- Samsung LTE430WQ-F0C LCD Panel +- Sharp LS037V7DW01 LCD Panel + +Signed-off-by: Tomi Valkeinen +--- + drivers/video/omap2/displays/Kconfig | 21 ++++ + drivers/video/omap2/displays/Makefile | 3 + + drivers/video/omap2/displays/panel-generic.c | 96 +++++++++++++++++ + .../omap2/displays/panel-samsung-lte430wq-f0c.c | 108 +++++++++++++++++++ + .../video/omap2/displays/panel-sharp-ls037v7dw01.c | 112 ++++++++++++++++++++ + 5 files changed, 340 insertions(+), 0 deletions(-) + create mode 100644 drivers/video/omap2/displays/Kconfig + create mode 100644 drivers/video/omap2/displays/Makefile + create mode 100644 drivers/video/omap2/displays/panel-generic.c + create mode 100644 drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c + create mode 100644 drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c + +diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig +new file mode 100644 +index 0000000..0419ec8 +--- /dev/null ++++ b/drivers/video/omap2/displays/Kconfig +@@ -0,0 +1,21 @@ ++menu "OMAP2/3 Display Device Drivers" ++ depends on OMAP2_DSS ++ ++config PANEL_GENERIC ++ tristate "Generic Panel" ++ help ++ Generic panel driver. ++ Used for DVI output for Beagle and OMAP3 SDP. ++ ++config PANEL_SAMSUNG_LTE430WQ_F0C ++ tristate "Samsung LTE430WQ-F0C LCD Panel" ++ depends on OMAP2_DSS ++ help ++ LCD Panel used on Overo Palo43 ++ ++config PANEL_SHARP_LS037V7DW01 ++ tristate "Sharp LS037V7DW01 LCD Panel" ++ depends on OMAP2_DSS ++ help ++ LCD Panel used in TI's SDP3430 and EVM boards ++endmenu +diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile +new file mode 100644 +index 0000000..a26bbd2 +--- /dev/null ++++ b/drivers/video/omap2/displays/Makefile +@@ -0,0 +1,3 @@ ++obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o ++obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o ++obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o +diff --git a/drivers/video/omap2/displays/panel-generic.c b/drivers/video/omap2/displays/panel-generic.c +new file mode 100644 +index 0000000..8382acb +--- /dev/null ++++ b/drivers/video/omap2/displays/panel-generic.c +@@ -0,0 +1,96 @@ ++/* ++ * Generic panel support ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#include ++#include ++ ++#include ++ ++static int generic_panel_init(struct omap_display *display) ++{ ++ return 0; ++} ++ ++static int generic_panel_enable(struct omap_display *display) ++{ ++ int r = 0; ++ ++ if (display->hw_config.panel_enable) ++ r = display->hw_config.panel_enable(display); ++ ++ return r; ++} ++ ++static void generic_panel_disable(struct omap_display *display) ++{ ++ if (display->hw_config.panel_disable) ++ display->hw_config.panel_disable(display); ++} ++ ++static int generic_panel_suspend(struct omap_display *display) ++{ ++ generic_panel_disable(display); ++ return 0; ++} ++ ++static int generic_panel_resume(struct omap_display *display) ++{ ++ return generic_panel_enable(display); ++} ++ ++static struct omap_panel generic_panel = { ++ .owner = THIS_MODULE, ++ .name = "panel-generic", ++ .init = generic_panel_init, ++ .enable = generic_panel_enable, ++ .disable = generic_panel_disable, ++ .suspend = generic_panel_suspend, ++ .resume = generic_panel_resume, ++ ++ .timings = { ++ /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */ ++ .x_res = 640, ++ .y_res = 480, ++ .pixel_clock = 23500, ++ .hfp = 48, ++ .hsw = 32, ++ .hbp = 80, ++ .vfp = 3, ++ .vsw = 4, ++ .vbp = 7, ++ }, ++ ++ .config = OMAP_DSS_LCD_TFT, ++}; ++ ++ ++static int __init generic_panel_drv_init(void) ++{ ++ omap_dss_register_panel(&generic_panel); ++ return 0; ++} ++ ++static void __exit generic_panel_drv_exit(void) ++{ ++ omap_dss_unregister_panel(&generic_panel); ++} ++ ++module_init(generic_panel_drv_init); ++module_exit(generic_panel_drv_exit); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c b/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c +new file mode 100644 +index 0000000..e4bb781 +--- /dev/null ++++ b/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c +@@ -0,0 +1,108 @@ ++/* ++ * LCD panel driver for Samsung LTE430WQ-F0C ++ * ++ * Author: Steve Sakoman ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#include ++#include ++ ++#include ++ ++static int samsung_lte_panel_init(struct omap_display *display) ++{ ++ return 0; ++} ++ ++static void samsung_lte_panel_cleanup(struct omap_display *display) ++{ ++} ++ ++static int samsung_lte_panel_enable(struct omap_display *display) ++{ ++ int r = 0; ++ ++ /* wait couple of vsyncs until enabling the LCD */ ++ msleep(50); ++ ++ if (display->hw_config.panel_enable) ++ r = display->hw_config.panel_enable(display); ++ ++ return r; ++} ++ ++static void samsung_lte_panel_disable(struct omap_display *display) ++{ ++ if (display->hw_config.panel_disable) ++ display->hw_config.panel_disable(display); ++ ++ /* wait at least 5 vsyncs after disabling the LCD */ ++ msleep(100); ++} ++ ++static int samsung_lte_panel_suspend(struct omap_display *display) ++{ ++ samsung_lte_panel_disable(display); ++ return 0; ++} ++ ++static int samsung_lte_panel_resume(struct omap_display *display) ++{ ++ return samsung_lte_panel_enable(display); ++} ++ ++static struct omap_panel samsung_lte_panel = { ++ .owner = THIS_MODULE, ++ .name = "samsung-lte430wq-f0c", ++ .init = samsung_lte_panel_init, ++ .cleanup = samsung_lte_panel_cleanup, ++ .enable = samsung_lte_panel_enable, ++ .disable = samsung_lte_panel_disable, ++ .suspend = samsung_lte_panel_suspend, ++ .resume = samsung_lte_panel_resume, ++ ++ .timings = { ++ .x_res = 480, ++ .y_res = 272, ++ ++ .pixel_clock = 9200, ++ ++ .hsw = 41, ++ .hfp = 8, ++ .hbp = 45-41, ++ ++ .vsw = 10, ++ .vfp = 4, ++ .vbp = 12-10, ++ }, ++ .recommended_bpp = 16, ++ .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IVS, ++}; ++ ++ ++static int __init samsung_lte_panel_drv_init(void) ++{ ++ omap_dss_register_panel(&samsung_lte_panel); ++ return 0; ++} ++ ++static void __exit samsung_lte_panel_drv_exit(void) ++{ ++ omap_dss_unregister_panel(&samsung_lte_panel); ++} ++ ++module_init(samsung_lte_panel_drv_init); ++module_exit(samsung_lte_panel_drv_exit); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c +new file mode 100644 +index 0000000..1f99150 +--- /dev/null ++++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c +@@ -0,0 +1,112 @@ ++/* ++ * LCD panel driver for Sharp LS037V7DW01 ++ * ++ * Copyright (C) 2008 Nokia Corporation ++ * Author: Tomi Valkeinen ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#include ++#include ++ ++#include ++ ++static int sharp_ls_panel_init(struct omap_display *display) ++{ ++ return 0; ++} ++ ++static void sharp_ls_panel_cleanup(struct omap_display *display) ++{ ++} ++ ++static int sharp_ls_panel_enable(struct omap_display *display) ++{ ++ int r = 0; ++ ++ /* wait couple of vsyncs until enabling the LCD */ ++ msleep(50); ++ ++ if (display->hw_config.panel_enable) ++ r = display->hw_config.panel_enable(display); ++ ++ return r; ++} ++ ++static void sharp_ls_panel_disable(struct omap_display *display) ++{ ++ if (display->hw_config.panel_disable) ++ display->hw_config.panel_disable(display); ++ ++ /* wait at least 5 vsyncs after disabling the LCD */ ++ ++ msleep(100); ++} ++ ++static int sharp_ls_panel_suspend(struct omap_display *display) ++{ ++ sharp_ls_panel_disable(display); ++ return 0; ++} ++ ++static int sharp_ls_panel_resume(struct omap_display *display) ++{ ++ return sharp_ls_panel_enable(display); ++} ++ ++static struct omap_panel sharp_ls_panel = { ++ .owner = THIS_MODULE, ++ .name = "sharp-ls037v7dw01", ++ .init = sharp_ls_panel_init, ++ .cleanup = sharp_ls_panel_cleanup, ++ .enable = sharp_ls_panel_enable, ++ .disable = sharp_ls_panel_disable, ++ .suspend = sharp_ls_panel_suspend, ++ .resume = sharp_ls_panel_resume, ++ ++ .timings = { ++ .x_res = 480, ++ .y_res = 640, ++ ++ .pixel_clock = 19200, ++ ++ .hsw = 2, ++ .hfp = 1, ++ .hbp = 28, ++ ++ .vsw = 1, ++ .vfp = 1, ++ .vbp = 1, ++ }, ++ ++ .acb = 0x28, ++ ++ .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS, ++}; ++ ++ ++static int __init sharp_ls_panel_drv_init(void) ++{ ++ omap_dss_register_panel(&sharp_ls_panel); ++ return 0; ++} ++ ++static void __exit sharp_ls_panel_drv_exit(void) ++{ ++ omap_dss_unregister_panel(&sharp_ls_panel); ++} ++ ++module_init(sharp_ls_panel_drv_init); ++module_exit(sharp_ls_panel_drv_exit); ++MODULE_LICENSE("GPL"); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0006-DSS2-HACK-Add-DSS2-support-for-N800.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0006-DSS2-HACK-Add-DSS2-support-for-N800.patch new file mode 100644 index 000000000..0025f1aa8 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0006-DSS2-HACK-Add-DSS2-support-for-N800.patch @@ -0,0 +1,1079 @@ +From 18a25382e81c03230e022ca2eb7e0fce24479d6a Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Thu, 2 Apr 2009 10:31:57 +0300 +Subject: [PATCH] DSS2: HACK: Add DSS2 support for N800 + +Works, but it an ugly quick hack. + +Signed-off-by: Tomi Valkeinen +--- + arch/arm/mach-omap2/board-n800.c | 216 +++++++++++--- + drivers/video/omap2/displays/Kconfig | 10 + + drivers/video/omap2/displays/Makefile | 3 + + drivers/video/omap2/displays/ctrl-blizzard.c | 279 +++++++++++++++++ + drivers/video/omap2/displays/panel-n800.c | 435 ++++++++++++++++++++++++++ + 5 files changed, 905 insertions(+), 38 deletions(-) + create mode 100644 drivers/video/omap2/displays/ctrl-blizzard.c + create mode 100644 drivers/video/omap2/displays/panel-n800.c + +diff --git a/arch/arm/mach-omap2/board-n800.c b/arch/arm/mach-omap2/board-n800.c +index f6f6571..6de60ae 100644 +--- a/arch/arm/mach-omap2/board-n800.c ++++ b/arch/arm/mach-omap2/board-n800.c +@@ -41,6 +41,8 @@ + #include + #include + #include ++#include ++#include + + #include <../drivers/cbus/tahvo.h> + #include <../drivers/media/video/tcm825x.h> +@@ -161,23 +163,176 @@ static struct omap_uart_config n800_uart_config __initdata = { + + #include "../../../drivers/cbus/retu.h" + +-static struct omap_fbmem_config n800_fbmem0_config __initdata = { +- .size = 752 * 1024, ++static struct omap_tmp105_config n800_tmp105_config __initdata = { ++ .tmp105_irq_pin = 125, ++ .set_power = n800_tmp105_set_power, + }; + +-static struct omap_fbmem_config n800_fbmem1_config __initdata = { +- .size = 752 * 1024, +-}; + +-static struct omap_fbmem_config n800_fbmem2_config __initdata = { +- .size = 752 * 1024, ++ ++ ++/* DISPLAY */ ++static struct { ++ struct clk *sys_ck; ++} blizzard; ++ ++static int blizzard_get_clocks(void) ++{ ++ blizzard.sys_ck = clk_get(0, "osc_ck"); ++ if (IS_ERR(blizzard.sys_ck)) { ++ printk(KERN_ERR "can't get Blizzard clock\n"); ++ return PTR_ERR(blizzard.sys_ck); ++ } ++ return 0; ++} ++ ++static unsigned long blizzard_get_clock_rate(void) ++{ ++ return clk_get_rate(blizzard.sys_ck); ++} ++ ++static int n800_pn800_enable(struct omap_display *display) ++{ ++ if (display->hw_config.panel_reset_gpio != -1) { ++ printk("enabling panel gpio\n"); ++ gpio_direction_output(display->hw_config.panel_reset_gpio, 1); ++ } ++ ++ return 0; ++} ++ ++static void n800_pn800_disable(struct omap_display *display) ++{ ++ if (display->hw_config.panel_reset_gpio != -1) { ++ printk("disabling panel gpio\n"); ++ gpio_direction_output(display->hw_config.panel_reset_gpio, 0); ++ msleep(120); ++ } ++} ++ ++static int n800_blizzard_enable(struct omap_display *display) ++{ ++ printk("enabling bliz powers\n"); ++ ++ /* Vcore to 1.475V */ ++ tahvo_set_clear_reg_bits(0x07, 0, 0xf); ++ msleep(10); ++ ++ clk_enable(blizzard.sys_ck); ++ ++ if (display->hw_config.ctrl_reset_gpio != -1) ++ gpio_direction_output(display->hw_config.ctrl_reset_gpio, 1); ++ ++ printk("osc_ck %lu\n", blizzard_get_clock_rate()); ++ ++ return 0; ++} ++ ++static void n800_blizzard_disable(struct omap_display *display) ++{ ++ printk("disabling bliz powers\n"); ++ ++ if (display->hw_config.ctrl_reset_gpio != -1) ++ gpio_direction_output(display->hw_config.ctrl_reset_gpio, 0); ++ ++ clk_disable(blizzard.sys_ck); ++ ++ /* Vcore to 1.005V */ ++ tahvo_set_clear_reg_bits(0x07, 0xf, 0); ++} ++ ++static int n800_set_backlight_level(struct omap_display *display, int level) ++{ ++ return 0; ++} ++ ++static struct omap_dss_display_config n800_dsi_display_data = { ++ .type = OMAP_DISPLAY_TYPE_DBI, ++ .name = "lcd", ++ .ctrl_name = "ctrl-blizzard", ++ .panel_name = "panel-pn800", ++ .panel_reset_gpio = -1, ++ .ctrl_reset_gpio = N800_BLIZZARD_POWERDOWN_GPIO, ++ .panel_enable = n800_pn800_enable, ++ .panel_disable = n800_pn800_disable, ++ .ctrl_enable = n800_blizzard_enable, ++ .ctrl_disable = n800_blizzard_disable, ++ .set_backlight = n800_set_backlight_level, ++ .u.rfbi = { ++ .channel = 0, ++ /* 8 for cmd mode, 16 for pixel data. ctrl-blizzard handles switching */ ++ .data_lines = 8, ++ }, ++ .panel_data = 0, // XXX used for panel datalines ++}; ++static struct omap_dss_board_info n800_dss_data = { ++ .num_displays = 1, ++ .displays = { ++ &n800_dsi_display_data, ++ }, + }; + +-static struct omap_tmp105_config n800_tmp105_config __initdata = { +- .tmp105_irq_pin = 125, +- .set_power = n800_tmp105_set_power, ++static struct platform_device n800_dss_device = { ++ .name = "omapdss", ++ .id = -1, ++ .dev = { ++ .platform_data = &n800_dss_data, ++ }, + }; + ++static void __init n800_display_init(void) ++{ ++ int r; ++ const struct omap_lcd_config *conf; ++ ++ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); ++ if (conf != NULL) { ++ n800_dsi_display_data.panel_reset_gpio = conf->nreset_gpio; ++ n800_dsi_display_data.panel_data = ++ (void*)(u32)conf->data_lines; // XXX ++ //printk("\n\nTULI %d\n\n", conf->data_lines); ++ } else { ++ printk("\n\nEI TULLU MIOTÄÄÄ\n\n"); ++ } ++ ++ blizzard_get_clocks(); ++ clk_enable(blizzard.sys_ck); // XXX always enable ++ ++ //omapfb_set_ctrl_platform_data(&n800_blizzard_data); ++ // ++ if (n800_dsi_display_data.ctrl_reset_gpio != -1) { ++ r = gpio_request(n800_dsi_display_data.ctrl_reset_gpio, ++ "Blizzard pd"); ++ if (r < 0) { ++ n800_dsi_display_data.ctrl_reset_gpio = -1; ++ printk(KERN_ERR "Unable to get Blizzard GPIO\n"); ++ } else { ++ gpio_direction_output(n800_dsi_display_data.ctrl_reset_gpio, ++ 1); ++ // XXX always enable ++ } ++ } ++ ++ if (n800_dsi_display_data.panel_reset_gpio != -1) { ++ r = gpio_request(n800_dsi_display_data.panel_reset_gpio, ++ "panel reset"); ++ if (r < 0) { ++ n800_dsi_display_data.panel_reset_gpio = -1; ++ printk(KERN_ERR "Unable to get pn800 GPIO\n"); ++ } else { ++ gpio_direction_output(n800_dsi_display_data.panel_reset_gpio, ++ 1); ++ // XXX always enable ++ } ++ } ++} ++ ++/* DISPLAY END */ ++ ++ ++ ++ ++ + static void mipid_shutdown(struct mipid_platform_data *pdata) + { + if (pdata->nreset_gpio != -1) { +@@ -191,6 +346,7 @@ static struct mipid_platform_data n800_mipid_platform_data = { + .shutdown = mipid_shutdown, + }; + ++#if 0 + static void __init mipid_dev_init(void) + { + const struct omap_lcd_config *conf; +@@ -201,26 +357,9 @@ static void __init mipid_dev_init(void) + n800_mipid_platform_data.data_lines = conf->data_lines; + } + } ++#endif + +-static struct { +- struct clk *sys_ck; +-} blizzard; +- +-static int blizzard_get_clocks(void) +-{ +- blizzard.sys_ck = clk_get(0, "osc_ck"); +- if (IS_ERR(blizzard.sys_ck)) { +- printk(KERN_ERR "can't get Blizzard clock\n"); +- return PTR_ERR(blizzard.sys_ck); +- } +- return 0; +-} +- +-static unsigned long blizzard_get_clock_rate(struct device *dev) +-{ +- return clk_get_rate(blizzard.sys_ck); +-} +- ++#if 0 + static void blizzard_enable_clocks(int enable) + { + if (enable) +@@ -265,14 +404,12 @@ static void __init blizzard_dev_init(void) + gpio_direction_output(N800_BLIZZARD_POWERDOWN_GPIO, 1); + + blizzard_get_clocks(); +- omapfb_set_ctrl_platform_data(&n800_blizzard_data); ++ //omapfb_set_ctrl_platform_data(&n800_blizzard_data); + } ++#endif + + static struct omap_board_config_kernel n800_config[] __initdata = { + { OMAP_TAG_UART, &n800_uart_config }, +- { OMAP_TAG_FBMEM, &n800_fbmem0_config }, +- { OMAP_TAG_FBMEM, &n800_fbmem1_config }, +- { OMAP_TAG_FBMEM, &n800_fbmem2_config }, + { OMAP_TAG_TMP105, &n800_tmp105_config }, + }; + +@@ -379,7 +516,7 @@ static struct omap2_mcspi_device_config tsc2005_mcspi_config = { + + static struct spi_board_info n800_spi_board_info[] __initdata = { + { +- .modalias = "lcd_mipid", ++ .modalias = "panel-n800", + .bus_num = 1, + .chip_select = 1, + .max_speed_hz = 4000000, +@@ -404,7 +541,7 @@ static struct spi_board_info n800_spi_board_info[] __initdata = { + + static struct spi_board_info n810_spi_board_info[] __initdata = { + { +- .modalias = "lcd_mipid", ++ .modalias = "panel-n800", + .bus_num = 1, + .chip_select = 1, + .max_speed_hz = 4000000, +@@ -582,6 +719,7 @@ static struct platform_device *n800_devices[] __initdata = { + #if defined(CONFIG_CBUS_RETU_HEADSET) + &retu_headset_device, + #endif ++ &n800_dss_device, + }; + + #ifdef CONFIG_MENELAUS +@@ -713,9 +851,10 @@ void __init nokia_n800_common_init(void) + if (machine_is_nokia_n810()) + i2c_register_board_info(2, n810_i2c_board_info_2, + ARRAY_SIZE(n810_i2c_board_info_2)); +- +- mipid_dev_init(); +- blizzard_dev_init(); ++ ++ //mipid_dev_init(); ++ //blizzard_dev_init(); ++ n800_display_init(); + } + + static void __init nokia_n800_init(void) +@@ -735,6 +874,7 @@ void __init nokia_n800_map_io(void) + omap_board_config_size = ARRAY_SIZE(n800_config); + + omap2_set_globals_242x(); ++ omap2_set_sdram_vram(800 * 480 * 2 * 3, 0); + omap2_map_common_io(); + } + +diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig +index 0419ec8..356ceb1 100644 +--- a/drivers/video/omap2/displays/Kconfig ++++ b/drivers/video/omap2/displays/Kconfig +@@ -18,4 +18,14 @@ config PANEL_SHARP_LS037V7DW01 + depends on OMAP2_DSS + help + LCD Panel used in TI's SDP3430 and EVM boards ++ ++config PANEL_N800 ++ tristate "Panel N8x0" ++ help ++ N8x0 LCD (hack) ++ ++config CTRL_BLIZZARD ++ tristate "Blizzard Controller" ++ help ++ Blizzard Controller (hack) + endmenu +diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile +index a26bbd2..1b74b7e 100644 +--- a/drivers/video/omap2/displays/Makefile ++++ b/drivers/video/omap2/displays/Makefile +@@ -1,3 +1,6 @@ + obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o + obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o + obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o ++ ++obj-$(CONFIG_CTRL_BLIZZARD) += ctrl-blizzard.o ++obj-$(CONFIG_PANEL_N800) += panel-n800.o +diff --git a/drivers/video/omap2/displays/ctrl-blizzard.c b/drivers/video/omap2/displays/ctrl-blizzard.c +new file mode 100644 +index 0000000..6698e4d +--- /dev/null ++++ b/drivers/video/omap2/displays/ctrl-blizzard.c +@@ -0,0 +1,279 @@ ++ ++//#define DEBUG ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#ifdef DEBUG ++#define DBG(format, ...) printk(KERN_DEBUG "Blizzard: " format, ## __VA_ARGS__) ++#else ++#define DBG(format, ...) ++#endif ++ ++#define BLIZZARD_REV_CODE 0x00 ++#define BLIZZARD_CONFIG 0x02 ++#define BLIZZARD_PLL_DIV 0x04 ++#define BLIZZARD_PLL_LOCK_RANGE 0x06 ++#define BLIZZARD_PLL_CLOCK_SYNTH_0 0x08 ++#define BLIZZARD_PLL_CLOCK_SYNTH_1 0x0a ++#define BLIZZARD_PLL_MODE 0x0c ++#define BLIZZARD_CLK_SRC 0x0e ++#define BLIZZARD_MEM_BANK0_ACTIVATE 0x10 ++#define BLIZZARD_MEM_BANK0_STATUS 0x14 ++#define BLIZZARD_PANEL_CONFIGURATION 0x28 ++#define BLIZZARD_HDISP 0x2a ++#define BLIZZARD_HNDP 0x2c ++#define BLIZZARD_VDISP0 0x2e ++#define BLIZZARD_VDISP1 0x30 ++#define BLIZZARD_VNDP 0x32 ++#define BLIZZARD_HSW 0x34 ++#define BLIZZARD_VSW 0x38 ++#define BLIZZARD_DISPLAY_MODE 0x68 ++#define BLIZZARD_INPUT_WIN_X_START_0 0x6c ++#define BLIZZARD_DATA_SOURCE_SELECT 0x8e ++#define BLIZZARD_DISP_MEM_DATA_PORT 0x90 ++#define BLIZZARD_DISP_MEM_READ_ADDR0 0x92 ++#define BLIZZARD_POWER_SAVE 0xE6 ++#define BLIZZARD_NDISP_CTRL_STATUS 0xE8 ++ ++/* Data source select */ ++/* For S1D13745 */ ++#define BLIZZARD_SRC_WRITE_LCD_BACKGROUND 0x00 ++#define BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE 0x01 ++#define BLIZZARD_SRC_WRITE_OVERLAY_ENABLE 0x04 ++#define BLIZZARD_SRC_DISABLE_OVERLAY 0x05 ++/* For S1D13744 */ ++#define BLIZZARD_SRC_WRITE_LCD 0x00 ++#define BLIZZARD_SRC_BLT_LCD 0x06 ++ ++#define BLIZZARD_COLOR_RGB565 0x01 ++#define BLIZZARD_COLOR_YUV420 0x09 ++ ++#define BLIZZARD_VERSION_S1D13745 0x01 /* Hailstorm */ ++#define BLIZZARD_VERSION_S1D13744 0x02 /* Blizzard */ ++ ++#define BLIZZARD_AUTO_UPDATE_TIME (HZ / 20) ++ ++ ++ ++static struct { ++ int version; ++} blizzard; ++ ++ ++static inline void blizzard_cmd(u8 cmd) ++{ ++ omap_rfbi_write_command(&cmd, 1); ++} ++ ++static inline void blizzard_write(u8 cmd, const u8 *buf, int len) ++{ ++ omap_rfbi_write_command(&cmd, 1); ++ omap_rfbi_write_data(buf, len); ++} ++ ++static inline void blizzard_read(u8 cmd, u8 *buf, int len) ++{ ++ omap_rfbi_write_command(&cmd, 1); ++ omap_rfbi_read_data(buf, len); ++} ++ ++static u8 blizzard_read_reg(u8 cmd) ++{ ++ u8 data; ++ blizzard_read(cmd, &data, 1); ++ return data; ++} ++ ++static int blizzard_ctrl_init(struct omap_display *display) ++{ ++ DBG("blizzard_ctrl_init\n"); ++ ++ return 0; ++} ++ ++ ++static int blizzard_ctrl_enable(struct omap_display *display) ++{ ++ int r = 0; ++ u8 rev, conf; ++ ++ DBG("blizzard_ctrl_enable\n"); ++ ++ if (display->hw_config.ctrl_enable) { ++ r = display->hw_config.ctrl_enable(display); ++ if (r) ++ return r; ++ } ++ ++ msleep(100); ++ ++ rev = blizzard_read_reg(BLIZZARD_CLK_SRC); ++ printk("CLK_SRC %x\n", rev); ++ ++ rev = blizzard_read_reg(BLIZZARD_PLL_DIV); ++ printk("PLLDIV %x\n", rev); ++ ++ rev = blizzard_read_reg(BLIZZARD_REV_CODE); ++ conf = blizzard_read_reg(BLIZZARD_CONFIG); ++ ++ printk("rev %x, conf %x\n", rev, conf); ++ ++ switch (rev & 0xfc) { ++ case 0x9c: ++ blizzard.version = BLIZZARD_VERSION_S1D13744; ++ pr_info("omapfb: s1d13744 LCD controller rev %d " ++ "initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07); ++ break; ++ case 0xa4: ++ blizzard.version = BLIZZARD_VERSION_S1D13745; ++ pr_info("omapfb: s1d13745 LCD controller rev %d " ++ "initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07); ++ break; ++ default: ++ printk("invalid s1d1374x revision %02x\n", ++ rev); ++ r = -ENODEV; ++ } ++ ++ return r; ++} ++ ++static void blizzard_ctrl_disable(struct omap_display *display) ++{ ++ DBG("blizzard_ctrl_disable\n"); ++ ++ if (display->hw_config.ctrl_disable) ++ display->hw_config.ctrl_disable(display); ++} ++ ++int rfbi_configure(int rfbi_module, int bpp, int lines); ++ ++static void blizzard_ctrl_setup_update(struct omap_display *display, ++ u16 x, u16 y, u16 w, u16 h) ++{ ++ u8 tmp[18]; ++ int x_end, y_end; ++ ++ DBG("blizzard_ctrl_setup_update\n"); ++ ++ x_end = x + w - 1; ++ y_end = y + h - 1; ++ ++ tmp[0] = x; ++ tmp[1] = x >> 8; ++ tmp[2] = y; ++ tmp[3] = y >> 8; ++ tmp[4] = x_end; ++ tmp[5] = x_end >> 8; ++ tmp[6] = y_end; ++ tmp[7] = y_end >> 8; ++ ++ /* scaling? */ ++ tmp[8] = x; ++ tmp[9] = x >> 8; ++ tmp[10] = y; ++ tmp[11] = y >> 8; ++ tmp[12] = x_end; ++ tmp[13] = x_end >> 8; ++ tmp[14] = y_end; ++ tmp[15] = y_end >> 8; ++ ++ tmp[16] = BLIZZARD_COLOR_RGB565; //color_mode; ++ ++ if (blizzard.version == BLIZZARD_VERSION_S1D13745) ++ tmp[17] = BLIZZARD_SRC_WRITE_LCD_BACKGROUND; ++ else ++ tmp[17] = blizzard.version == BLIZZARD_VERSION_S1D13744 ? ++ BLIZZARD_SRC_WRITE_LCD : ++ BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE; ++ ++ rfbi_configure(display->hw_config.u.rfbi.channel, ++ 16, ++ 8); ++ ++ blizzard_write(BLIZZARD_INPUT_WIN_X_START_0, tmp, 18); ++ ++ rfbi_configure(display->hw_config.u.rfbi.channel, ++ 16, ++ 16); ++} ++ ++static int blizzard_ctrl_enable_te(struct omap_display *display, bool enable) ++{ ++ return 0; ++} ++ ++static int blizzard_ctrl_rotate(struct omap_display *display, u8 rotate) ++{ ++ return 0; ++} ++ ++static int blizzard_ctrl_mirror(struct omap_display *display, bool enable) ++{ ++ return 0; ++} ++ ++static int blizzard_run_test(struct omap_display *display, int test_num) ++{ ++ return 0; ++} ++ ++static struct omap_ctrl blizzard_ctrl = { ++ .owner = THIS_MODULE, ++ .name = "ctrl-blizzard", ++ .init = blizzard_ctrl_init, ++ .enable = blizzard_ctrl_enable, ++ .disable = blizzard_ctrl_disable, ++ .setup_update = blizzard_ctrl_setup_update, ++ .enable_te = blizzard_ctrl_enable_te, ++ .set_rotate = blizzard_ctrl_rotate, ++ .set_mirror = blizzard_ctrl_mirror, ++ .run_test = blizzard_run_test, ++ .pixel_size = 16, ++ ++ .timings = { ++ .cs_on_time = 0, ++ ++ .we_on_time = 9000, ++ .we_off_time = 18000, ++ .we_cycle_time = 36000, ++ ++ .re_on_time = 9000, ++ .re_off_time = 27000, ++ .re_cycle_time = 36000, ++ ++ .access_time = 27000, ++ .cs_off_time = 36000, ++ ++ .cs_pulse_width = 0, ++ }, ++}; ++ ++ ++static int __init blizzard_init(void) ++{ ++ DBG("blizzard_init\n"); ++ omap_dss_register_ctrl(&blizzard_ctrl); ++ return 0; ++} ++ ++static void __exit blizzard_exit(void) ++{ ++ DBG("blizzard_exit\n"); ++ ++ omap_dss_unregister_ctrl(&blizzard_ctrl); ++} ++ ++module_init(blizzard_init); ++module_exit(blizzard_exit); ++ ++MODULE_AUTHOR("Tomi Valkeinen "); ++MODULE_DESCRIPTION("Blizzard Driver"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/video/omap2/displays/panel-n800.c b/drivers/video/omap2/displays/panel-n800.c +new file mode 100644 +index 0000000..91d3e37 +--- /dev/null ++++ b/drivers/video/omap2/displays/panel-n800.c +@@ -0,0 +1,435 @@ ++ ++/*#define DEBUG*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#define MIPID_CMD_READ_DISP_ID 0x04 ++#define MIPID_CMD_READ_RED 0x06 ++#define MIPID_CMD_READ_GREEN 0x07 ++#define MIPID_CMD_READ_BLUE 0x08 ++#define MIPID_CMD_READ_DISP_STATUS 0x09 ++#define MIPID_CMD_RDDSDR 0x0F ++#define MIPID_CMD_SLEEP_IN 0x10 ++#define MIPID_CMD_SLEEP_OUT 0x11 ++#define MIPID_CMD_DISP_OFF 0x28 ++#define MIPID_CMD_DISP_ON 0x29 ++ ++#define MIPID_VER_LPH8923 3 ++#define MIPID_VER_LS041Y3 4 ++ ++#define MIPID_ESD_CHECK_PERIOD msecs_to_jiffies(5000) ++ ++#ifdef DEBUG ++#define DBG(format, ...) printk(KERN_DEBUG "PN800: " format, ## __VA_ARGS__) ++#else ++#define DBG(format, ...) ++#endif ++ ++struct pn800_device { ++ struct backlight_device *bl_dev; ++ int enabled; ++ int model; ++ int revision; ++ u8 display_id[3]; ++ unsigned int saved_bklight_level; ++ unsigned long hw_guard_end; /* next value of jiffies ++ when we can issue the ++ next sleep in/out command */ ++ unsigned long hw_guard_wait; /* max guard time in jiffies */ ++ ++ struct spi_device *spi; ++ struct mutex mutex; ++ struct omap_panel panel; ++ struct omap_display *display; ++}; ++ ++ ++static void pn800_transfer(struct pn800_device *md, int cmd, ++ const u8 *wbuf, int wlen, u8 *rbuf, int rlen) ++{ ++ struct spi_message m; ++ struct spi_transfer *x, xfer[4]; ++ u16 w; ++ int r; ++ ++ BUG_ON(md->spi == NULL); ++ ++ spi_message_init(&m); ++ ++ memset(xfer, 0, sizeof(xfer)); ++ x = &xfer[0]; ++ ++ cmd &= 0xff; ++ x->tx_buf = &cmd; ++ x->bits_per_word = 9; ++ x->len = 2; ++ spi_message_add_tail(x, &m); ++ ++ if (wlen) { ++ x++; ++ x->tx_buf = wbuf; ++ x->len = wlen; ++ x->bits_per_word = 9; ++ spi_message_add_tail(x, &m); ++ } ++ ++ if (rlen) { ++ x++; ++ x->rx_buf = &w; ++ x->len = 1; ++ spi_message_add_tail(x, &m); ++ ++ if (rlen > 1) { ++ /* Arrange for the extra clock before the first ++ * data bit. ++ */ ++ x->bits_per_word = 9; ++ x->len = 2; ++ ++ x++; ++ x->rx_buf = &rbuf[1]; ++ x->len = rlen - 1; ++ spi_message_add_tail(x, &m); ++ } ++ } ++ ++ r = spi_sync(md->spi, &m); ++ if (r < 0) ++ dev_dbg(&md->spi->dev, "spi_sync %d\n", r); ++ ++ if (rlen) ++ rbuf[0] = w & 0xff; ++} ++ ++static inline void pn800_cmd(struct pn800_device *md, int cmd) ++{ ++ pn800_transfer(md, cmd, NULL, 0, NULL, 0); ++} ++ ++static inline void pn800_write(struct pn800_device *md, ++ int reg, const u8 *buf, int len) ++{ ++ pn800_transfer(md, reg, buf, len, NULL, 0); ++} ++ ++static inline void pn800_read(struct pn800_device *md, ++ int reg, u8 *buf, int len) ++{ ++ pn800_transfer(md, reg, NULL, 0, buf, len); ++} ++ ++static void set_data_lines(struct pn800_device *md, int data_lines) ++{ ++ u16 par; ++ ++ switch (data_lines) { ++ case 16: ++ par = 0x150; ++ break; ++ case 18: ++ par = 0x160; ++ break; ++ case 24: ++ par = 0x170; ++ break; ++ } ++ pn800_write(md, 0x3a, (u8 *)&par, 2); ++} ++ ++static void send_init_string(struct pn800_device *md) ++{ ++ u16 initpar[] = { 0x0102, 0x0100, 0x0100 }; ++ int data_lines; ++ ++ pn800_write(md, 0xc2, (u8 *)initpar, sizeof(initpar)); ++ ++ data_lines = (int)md->display->hw_config.panel_data; // XXX ++ ++ set_data_lines(md, data_lines); ++} ++ ++static void hw_guard_start(struct pn800_device *md, int guard_msec) ++{ ++ md->hw_guard_wait = msecs_to_jiffies(guard_msec); ++ md->hw_guard_end = jiffies + md->hw_guard_wait; ++} ++ ++static void hw_guard_wait(struct pn800_device *md) ++{ ++ unsigned long wait = md->hw_guard_end - jiffies; ++ ++ if ((long)wait > 0 && wait <= md->hw_guard_wait) { ++ set_current_state(TASK_UNINTERRUPTIBLE); ++ schedule_timeout(wait); ++ } ++} ++ ++static void set_sleep_mode(struct pn800_device *md, int on) ++{ ++ int cmd, sleep_time = 50; ++ ++ if (on) ++ cmd = MIPID_CMD_SLEEP_IN; ++ else ++ cmd = MIPID_CMD_SLEEP_OUT; ++ hw_guard_wait(md); ++ pn800_cmd(md, cmd); ++ hw_guard_start(md, 120); ++ /* ++ * When we enable the panel, it seems we _have_ to sleep ++ * 120 ms before sending the init string. When disabling the ++ * panel we'll sleep for the duration of 2 frames, so that the ++ * controller can still provide the PCLK,HS,VS signals. */ ++ if (!on) ++ sleep_time = 120; ++ msleep(sleep_time); ++} ++ ++static void set_display_state(struct pn800_device *md, int enabled) ++{ ++ int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF; ++ ++ pn800_cmd(md, cmd); ++} ++ ++static int panel_enabled(struct pn800_device *md) ++{ ++ u32 disp_status; ++ int enabled; ++ ++ pn800_read(md, MIPID_CMD_READ_DISP_STATUS, (u8 *)&disp_status, 4); ++ disp_status = __be32_to_cpu(disp_status); ++ enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10)); ++ dev_dbg(&md->spi->dev, ++ "LCD panel %s enabled by bootloader (status 0x%04x)\n", ++ enabled ? "" : "not ", disp_status); ++ DBG("status %#08x\n", disp_status); ++ return enabled; ++} ++ ++static int panel_detect(struct pn800_device *md) ++{ ++ pn800_read(md, MIPID_CMD_READ_DISP_ID, md->display_id, 3); ++ dev_dbg(&md->spi->dev, "MIPI display ID: %02x%02x%02x\n", ++ md->display_id[0], md->display_id[1], md->display_id[2]); ++ ++ switch (md->display_id[0]) { ++ case 0x45: ++ md->model = MIPID_VER_LPH8923; ++ md->panel.name = "lph8923"; ++ break; ++ case 0x83: ++ md->model = MIPID_VER_LS041Y3; ++ md->panel.name = "ls041y3"; ++ //md->esd_check = ls041y3_esd_check; ++ break; ++ default: ++ md->panel.name = "unknown"; ++ dev_err(&md->spi->dev, "invalid display ID\n"); ++ return -ENODEV; ++ } ++ ++ md->revision = md->display_id[1]; ++ pr_info("omapfb: %s rev %02x LCD detected\n", ++ md->panel.name, md->revision); ++ ++ return 0; ++} ++ ++ ++ ++static int pn800_panel_enable(struct omap_display *display) ++{ ++ int r; ++ struct pn800_device *md = ++ (struct pn800_device *)display->panel->priv; ++ ++ DBG("pn800_panel_enable\n"); ++ ++ mutex_lock(&md->mutex); ++ ++ if (display->hw_config.panel_enable) ++ display->hw_config.panel_enable(display); ++ ++ msleep(50); // wait for power up ++ ++ r = panel_detect(md); ++ if (r) { ++ mutex_unlock(&md->mutex); ++ return r; ++ } ++ ++ md->enabled = panel_enabled(md); ++ ++ if (md->enabled) { ++ DBG("panel already enabled\n"); ++ ; /*pn800_esd_start_check(md);*/ ++ } else { ++ ; /*md->saved_bklight_level = pn800_get_bklight_level(panel);*/ ++ } ++ ++ ++ if (md->enabled) { ++ mutex_unlock(&md->mutex); ++ return 0; ++ } ++ ++ set_sleep_mode(md, 0); ++ md->enabled = 1; ++ send_init_string(md); ++ set_display_state(md, 1); ++ //mipid_set_bklight_level(panel, md->saved_bklight_level); ++ //mipid_esd_start_check(md); ++ ++ mutex_unlock(&md->mutex); ++ return 0; ++} ++ ++static void pn800_panel_disable(struct omap_display *display) ++{ ++ struct pn800_device *md = ++ (struct pn800_device *)display->panel->priv; ++ ++ DBG("pn800_panel_disable\n"); ++ ++ mutex_lock(&md->mutex); ++ ++ if (!md->enabled) { ++ mutex_unlock(&md->mutex); ++ return; ++ } ++ /*md->saved_bklight_level = pn800_get_bklight_level(panel);*/ ++ /*pn800_set_bklight_level(panel, 0);*/ ++ ++ set_display_state(md, 0); ++ set_sleep_mode(md, 1); ++ md->enabled = 0; ++ ++ ++ if (display->hw_config.panel_disable) ++ display->hw_config.panel_disable(display); ++ ++ mutex_unlock(&md->mutex); ++} ++ ++static int pn800_panel_init(struct omap_display *display) ++{ ++ struct pn800_device *md = ++ (struct pn800_device *)display->panel->priv; ++ ++ DBG("pn800_panel_init\n"); ++ ++ mutex_init(&md->mutex); ++ md->display = display; ++ ++ return 0; ++} ++ ++static int pn800_run_test(struct omap_display *display, int test_num) ++{ ++ return 0; ++} ++ ++static struct omap_panel pn800_panel = { ++ .owner = THIS_MODULE, ++ .name = "panel-pn800", ++ .init = pn800_panel_init, ++ /*.remove = pn800_cleanup,*/ ++ .enable = pn800_panel_enable, ++ .disable = pn800_panel_disable, ++ //.set_mode = pn800_set_mode, ++ .run_test = pn800_run_test, ++ ++ .timings = { ++ .x_res = 800, ++ .y_res = 480, ++ ++ .pixel_clock = 21940, ++ .hsw = 50, ++ .hfp = 20, ++ .hbp = 15, ++ ++ .vsw = 2, ++ .vfp = 1, ++ .vbp = 3, ++ }, ++ .config = OMAP_DSS_LCD_TFT, ++}; ++ ++static int pn800_spi_probe(struct spi_device *spi) ++{ ++ struct pn800_device *md; ++ ++ DBG("pn800_spi_probe\n"); ++ ++ md = kzalloc(sizeof(*md), GFP_KERNEL); ++ if (md == NULL) { ++ dev_err(&spi->dev, "out of memory\n"); ++ return -ENOMEM; ++ } ++ ++ spi->mode = SPI_MODE_0; ++ md->spi = spi; ++ dev_set_drvdata(&spi->dev, md); ++ md->panel = pn800_panel; ++ pn800_panel.priv = md; ++ ++ omap_dss_register_panel(&pn800_panel); ++ ++ return 0; ++} ++ ++static int pn800_spi_remove(struct spi_device *spi) ++{ ++ struct pn800_device *md = dev_get_drvdata(&spi->dev); ++ ++ DBG("pn800_spi_remove\n"); ++ ++ omap_dss_unregister_panel(&pn800_panel); ++ ++ /*pn800_disable(&md->panel);*/ ++ kfree(md); ++ ++ return 0; ++} ++ ++static struct spi_driver pn800_spi_driver = { ++ .driver = { ++ .name = "panel-n800", ++ .bus = &spi_bus_type, ++ .owner = THIS_MODULE, ++ }, ++ .probe = pn800_spi_probe, ++ .remove = __devexit_p(pn800_spi_remove), ++}; ++ ++static int __init pn800_init(void) ++{ ++ DBG("pn800_init\n"); ++ return spi_register_driver(&pn800_spi_driver); ++} ++ ++static void __exit pn800_exit(void) ++{ ++ DBG("pn800_exit\n"); ++ spi_unregister_driver(&pn800_spi_driver); ++} ++ ++module_init(pn800_init); ++module_exit(pn800_exit); ++ ++MODULE_AUTHOR("Tomi Valkeinen "); ++MODULE_DESCRIPTION("N800 LCD Driver"); ++MODULE_LICENSE("GPL"); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0007-DSS2-Add-DSS2-support-for-SDP-Beagle-Overo-EVM.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0007-DSS2-Add-DSS2-support-for-SDP-Beagle-Overo-EVM.patch new file mode 100644 index 000000000..26d21d874 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0007-DSS2-Add-DSS2-support-for-SDP-Beagle-Overo-EVM.patch @@ -0,0 +1,5715 @@ +From 9292aae93419867b9d0fce5cf3b2697e9250f5b5 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Thu, 2 Apr 2009 10:36:05 +0300 +Subject: [PATCH] DSS2: Add DSS2 support for SDP, Beagle, Overo, EVM + +Also custom dss_*_defconfigs as an example. + +Signed-off-by: Tomi Valkeinen +--- + arch/arm/configs/dss_omap3_beagle_defconfig | 1371 ++++++++++++++++++++ + arch/arm/configs/dss_omap_3430sdp_defconfig | 1634 +++++++++++++++++++++++ + arch/arm/configs/dss_overo_defconfig | 1862 +++++++++++++++++++++++++++ + arch/arm/mach-omap2/board-3430sdp.c | 227 ++++- + arch/arm/mach-omap2/board-omap3beagle.c | 95 ++- + arch/arm/mach-omap2/board-omap3evm.c | 217 +++- + arch/arm/mach-omap2/board-overo.c | 98 ++- + 7 files changed, 5475 insertions(+), 29 deletions(-) + create mode 100644 arch/arm/configs/dss_omap3_beagle_defconfig + create mode 100644 arch/arm/configs/dss_omap_3430sdp_defconfig + create mode 100644 arch/arm/configs/dss_overo_defconfig + +diff --git a/arch/arm/configs/dss_omap3_beagle_defconfig b/arch/arm/configs/dss_omap3_beagle_defconfig +new file mode 100644 +index 0000000..7143168 +--- /dev/null ++++ b/arch/arm/configs/dss_omap3_beagle_defconfig +@@ -0,0 +1,1371 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.29-omap1 ++# Thu Apr 2 11:24:09 2009 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++CONFIG_GENERIC_TIME=y ++CONFIG_GENERIC_CLOCKEVENTS=y ++CONFIG_MMU=y ++# CONFIG_NO_IOPORT is not set ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++CONFIG_SYSVIPC_SYSCTL=y ++# CONFIG_POSIX_MQUEUE is not set ++CONFIG_BSD_PROCESS_ACCT=y ++# CONFIG_BSD_PROCESS_ACCT_V3 is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_AUDIT is not set ++ ++# ++# RCU Subsystem ++# ++CONFIG_CLASSIC_RCU=y ++# CONFIG_TREE_RCU is not set ++# CONFIG_PREEMPT_RCU is not set ++# CONFIG_TREE_RCU_TRACE is not set ++# CONFIG_PREEMPT_RCU_TRACE is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=14 ++CONFIG_GROUP_SCHED=y ++CONFIG_FAIR_GROUP_SCHED=y ++# CONFIG_RT_GROUP_SCHED is not set ++CONFIG_USER_SCHED=y ++# CONFIG_CGROUP_SCHED is not set ++# CONFIG_CGROUPS is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++# CONFIG_NAMESPACES is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++CONFIG_ANON_INODES=y ++CONFIG_EMBEDDED=y ++CONFIG_UID16=y ++# CONFIG_SYSCTL_SYSCALL is not set ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++CONFIG_KALLSYMS_EXTRA_PASS=y ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_COMPAT_BRK=y ++CONFIG_SLAB=y ++# CONFIG_SLUB is not set ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y ++CONFIG_BLOCK=y ++# CONFIG_LBD is not set ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++CONFIG_DEFAULT_AS=y ++# CONFIG_DEFAULT_DEADLINE is not set ++# CONFIG_DEFAULT_CFQ is not set ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="anticipatory" ++# CONFIG_FREEZER is not set ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_S3C64XX is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++CONFIG_ARCH_OMAP=y ++# CONFIG_ARCH_MSM is not set ++# CONFIG_ARCH_W90X900 is not set ++ ++# ++# TI OMAP Implementations ++# ++CONFIG_ARCH_OMAP_OTG=y ++# CONFIG_ARCH_OMAP1 is not set ++# CONFIG_ARCH_OMAP2 is not set ++CONFIG_ARCH_OMAP3=y ++ ++# ++# OMAP Feature Selections ++# ++# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set ++# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set ++# CONFIG_OMAP_SMARTREFLEX is not set ++# CONFIG_OMAP_RESET_CLOCKS is not set ++CONFIG_OMAP_BOOT_TAG=y ++CONFIG_OMAP_BOOT_REASON=y ++# CONFIG_OMAP_COMPONENT_VERSION is not set ++# CONFIG_OMAP_GPIO_SWITCH is not set ++# CONFIG_OMAP_MUX is not set ++# CONFIG_OMAP_MCBSP is not set ++# CONFIG_OMAP_MBOX_FWK is not set ++# CONFIG_OMAP_MPU_TIMER is not set ++CONFIG_OMAP_32K_TIMER=y ++CONFIG_OMAP_32K_TIMER_HZ=128 ++CONFIG_OMAP_TICK_GPTIMER=12 ++CONFIG_OMAP_DM_TIMER=y ++# CONFIG_OMAP_LL_DEBUG_UART1 is not set ++# CONFIG_OMAP_LL_DEBUG_UART2 is not set ++CONFIG_OMAP_LL_DEBUG_UART3=y ++CONFIG_ARCH_OMAP34XX=y ++CONFIG_ARCH_OMAP3430=y ++ ++# ++# OMAP Board Type ++# ++# CONFIG_MACH_NOKIA_RX51 is not set ++# CONFIG_MACH_OMAP_LDP is not set ++# CONFIG_MACH_OMAP_3430SDP is not set ++# CONFIG_MACH_OMAP3EVM is not set ++CONFIG_MACH_OMAP3_BEAGLE=y ++# CONFIG_MACH_OVERO is not set ++# CONFIG_MACH_OMAP3_PANDORA is not set ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_V7=y ++CONFIG_CPU_32v7=y ++CONFIG_CPU_ABRT_EV7=y ++CONFIG_CPU_PABRT_IFAR=y ++CONFIG_CPU_CACHE_V7=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V7=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_ARM_THUMBEE is not set ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++CONFIG_HAS_TLS_REG=y ++# CONFIG_OUTER_CACHE is not set ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_TICK_ONESHOT=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=128 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=0 ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++# CONFIG_LEDS is not set ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.2.14:/tftpboot/rootfs ip=192.168.2.15 nolock,rsize=1024,wsize=1024 rw" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# CPU Power Management ++# ++# CONFIG_CPU_FREQ is not set ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++CONFIG_FPE_NWFPE=y ++# CONFIG_FPE_NWFPE_XP is not set ++# CONFIG_FPE_FASTFPE is not set ++CONFIG_VFP=y ++CONFIG_VFPv3=y ++# CONFIG_NEON is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_HAVE_AOUT=y ++# CONFIG_BINFMT_AOUT is not set ++CONFIG_BINFMT_MISC=y ++ ++# ++# Power management options ++# ++CONFIG_PM=y ++# CONFIG_PM_DEBUG is not set ++# CONFIG_SUSPEND is not set ++# CONFIG_APM_EMULATION is not set ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++CONFIG_COMPAT_NET_DEV_OPS=y ++CONFIG_PACKET=y ++# CONFIG_PACKET_MMAP is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set ++CONFIG_NET_KEY=y ++# CONFIG_NET_KEY_MIGRATE is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_BOOTP=y ++CONFIG_IP_PNP_RARP=y ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_NET_DSA is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set ++# CONFIG_DCB is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++# CONFIG_PHONET is not set ++CONFIG_WIRELESS=y ++# CONFIG_CFG80211 is not set ++CONFIG_WIRELESS_OLD_REGULATORY=y ++# CONFIG_WIRELESS_EXT is not set ++# CONFIG_LIB80211 is not set ++# CONFIG_MAC80211 is not set ++# CONFIG_WIMAX is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++# CONFIG_FW_LOADER is not set ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++# CONFIG_MTD_CONCAT is not set ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_TESTS is not set ++# CONFIG_MTD_REDBOOT_PARTS is not set ++# CONFIG_MTD_CMDLINE_PARTS is not set ++# CONFIG_MTD_AFS_PARTS is not set ++# CONFIG_MTD_AR7_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++# CONFIG_MTD_OOPS is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++# CONFIG_MTD_CFI is not set ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++CONFIG_MTD_NAND=y ++# CONFIG_MTD_NAND_VERIFY_WRITE is not set ++# CONFIG_MTD_NAND_ECC_SMC is not set ++# CONFIG_MTD_NAND_MUSEUM_IDS is not set ++# CONFIG_MTD_NAND_GPIO is not set ++CONFIG_MTD_NAND_OMAP2=y ++CONFIG_MTD_NAND_IDS=y ++# CONFIG_MTD_NAND_DISKONCHIP is not set ++# CONFIG_MTD_NAND_NANDSIM is not set ++# CONFIG_MTD_NAND_PLATFORM is not set ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# LPDDR flash memory drivers ++# ++# CONFIG_MTD_LPDDR is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=16384 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++# CONFIG_MISC_DEVICES is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++# CONFIG_CHR_DEV_SG is not set ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_LIBFC is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_DH is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++# CONFIG_VETH is not set ++# CONFIG_NET_ETHERNET is not set ++# CONFIG_NETDEV_1000 is not set ++# CONFIG_NETDEV_10000 is not set ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++# CONFIG_IWLWIFI_LEDS is not set ++ ++# ++# Enable WiMAX (Networking options) to see the WiMAX drivers ++# ++# CONFIG_WAN is not set ++# CONFIG_PPP is not set ++# CONFIG_SLIP is not set ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++# CONFIG_INPUT_MOUSEDEV is not set ++# CONFIG_INPUT_JOYDEV is not set ++# CONFIG_INPUT_EVDEV is not set ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++# CONFIG_INPUT_KEYBOARD is not set ++# CONFIG_INPUT_MOUSE is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++# CONFIG_SERIO is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++CONFIG_SERIAL_8250_CONSOLE=y ++CONFIG_SERIAL_8250_NR_UARTS=32 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++CONFIG_SERIAL_8250_EXTENDED=y ++CONFIG_SERIAL_8250_MANY_PORTS=y ++CONFIG_SERIAL_8250_SHARE_IRQ=y ++CONFIG_SERIAL_8250_DETECT_IRQ=y ++CONFIG_SERIAL_8250_RSA=y ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++CONFIG_I2C_HELPER_AUTO=y ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_OMAP=y ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TWL4030_MADC is not set ++# CONFIG_TWL4030_POWEROFF is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++# CONFIG_SPI is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++# CONFIG_DEBUG_GPIO is not set ++# CONFIG_GPIO_SYSFS is not set ++ ++# ++# Memory mapped GPIO expanders: ++# ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++CONFIG_GPIO_TWL4030=y ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++# CONFIG_HWMON is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++# CONFIG_WATCHDOG is not set ++CONFIG_SSB_POSSIBLE=y ++ ++# ++# Sonics Silicon Backplane ++# ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++# CONFIG_TPS65010 is not set ++CONFIG_TWL4030_CORE=y ++# CONFIG_TWL4030_POWER is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++# CONFIG_MFD_PCF50633 is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_DVB_CORE is not set ++# CONFIG_VIDEO_MEDIA is not set ++ ++# ++# Multimedia drivers ++# ++CONFIG_DAB=y ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++# CONFIG_FB_BOOT_VESA_SUPPORT is not set ++CONFIG_FB_CFB_FILLRECT=m ++CONFIG_FB_CFB_COPYAREA=m ++CONFIG_FB_CFB_IMAGEBLIT=m ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_FOREIGN_ENDIAN is not set ++# CONFIG_FB_SYS_FOPS is not set ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set ++CONFIG_OMAP2_DSS=m ++CONFIG_OMAP2_DSS_VRAM_SIZE=12 ++CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y ++# CONFIG_OMAP2_DSS_RFBI is not set ++CONFIG_OMAP2_DSS_VENC=y ++# CONFIG_OMAP2_DSS_SDI is not set ++# CONFIG_OMAP2_DSS_DSI is not set ++# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set ++CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 ++ ++# ++# OMAP2/3 Display Device Drivers ++# ++CONFIG_PANEL_GENERIC=m ++# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set ++# CONFIG_PANEL_SHARP_LS037V7DW01 is not set ++# CONFIG_PANEL_N800 is not set ++# CONFIG_CTRL_BLIZZARD is not set ++CONFIG_FB_OMAP2=m ++CONFIG_FB_OMAP2_DEBUG_SUPPORT=y ++# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set ++CONFIG_FB_OMAP2_NUM_FBS=3 ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE is not set ++# CONFIG_LOGO is not set ++# CONFIG_SOUND is not set ++# CONFIG_HID_SUPPORT is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++CONFIG_USB_ARCH_HAS_EHCI=y ++# CONFIG_USB is not set ++# CONFIG_USB_OTG_WHITELIST is not set ++# CONFIG_USB_OTG_BLACKLIST_HUB is not set ++CONFIG_USB_MUSB_HDRC=y ++CONFIG_USB_MUSB_SOC=y ++ ++# ++# OMAP 343x high speed USB support ++# ++# CONFIG_USB_MUSB_HOST is not set ++CONFIG_USB_MUSB_PERIPHERAL=y ++# CONFIG_USB_MUSB_OTG is not set ++CONFIG_USB_GADGET_MUSB_HDRC=y ++# CONFIG_MUSB_PIO_ONLY is not set ++CONFIG_USB_INVENTRA_DMA=y ++# CONFIG_USB_TI_CPPI_DMA is not set ++# CONFIG_USB_MUSB_DEBUG is not set ++ ++# ++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; ++# ++CONFIG_USB_GADGET=y ++# CONFIG_USB_GADGET_DEBUG is not set ++# CONFIG_USB_GADGET_DEBUG_FILES is not set ++# CONFIG_USB_GADGET_DEBUG_FS is not set ++CONFIG_USB_GADGET_VBUS_DRAW=2 ++CONFIG_USB_GADGET_SELECTED=y ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_ATMEL_USBA is not set ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_PXA25X is not set ++# CONFIG_USB_GADGET_PXA27X is not set ++# CONFIG_USB_GADGET_S3C2410 is not set ++# CONFIG_USB_GADGET_IMX is not set ++# CONFIG_USB_GADGET_M66592 is not set ++# CONFIG_USB_GADGET_AMD5536UDC is not set ++# CONFIG_USB_GADGET_FSL_QE is not set ++# CONFIG_USB_GADGET_CI13XXX is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++CONFIG_USB_GADGET_DUALSPEED=y ++# CONFIG_USB_ZERO is not set ++CONFIG_USB_ETH=y ++CONFIG_USB_ETH_RNDIS=y ++# CONFIG_USB_GADGETFS is not set ++# CONFIG_USB_FILE_STORAGE is not set ++# CONFIG_USB_G_SERIAL is not set ++# CONFIG_USB_MIDI_GADGET is not set ++# CONFIG_USB_G_PRINTER is not set ++# CONFIG_USB_CDC_COMPOSITE is not set ++ ++# ++# OTG and related infrastructure ++# ++CONFIG_USB_OTG_UTILS=y ++# CONFIG_USB_GPIO_VBUS is not set ++# CONFIG_ISP1301_OMAP is not set ++CONFIG_TWL4030_USB=y ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++# CONFIG_SDIO_UART is not set ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++# CONFIG_MMC_SDHCI is not set ++CONFIG_MMC_OMAP_HS=y ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++# CONFIG_NEW_LEDS is not set ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++CONFIG_RTC_HCTOSYS=y ++CONFIG_RTC_HCTOSYS_DEVICE="rtc0" ++# CONFIG_RTC_DEBUG is not set ++ ++# ++# RTC interfaces ++# ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++# CONFIG_RTC_DRV_TEST is not set ++ ++# ++# I2C RTC drivers ++# ++# CONFIG_RTC_DRV_DS1307 is not set ++# CONFIG_RTC_DRV_DS1374 is not set ++# CONFIG_RTC_DRV_DS1672 is not set ++# CONFIG_RTC_DRV_MAX6900 is not set ++# CONFIG_RTC_DRV_RS5C372 is not set ++# CONFIG_RTC_DRV_ISL1208 is not set ++# CONFIG_RTC_DRV_X1205 is not set ++# CONFIG_RTC_DRV_PCF8563 is not set ++# CONFIG_RTC_DRV_PCF8583 is not set ++# CONFIG_RTC_DRV_M41T80 is not set ++CONFIG_RTC_DRV_TWL4030=y ++# CONFIG_RTC_DRV_S35390A is not set ++# CONFIG_RTC_DRV_FM3130 is not set ++# CONFIG_RTC_DRV_RX8581 is not set ++ ++# ++# SPI RTC drivers ++# ++ ++# ++# Platform RTC drivers ++# ++# CONFIG_RTC_DRV_CMOS is not set ++# CONFIG_RTC_DRV_DS1286 is not set ++# CONFIG_RTC_DRV_DS1511 is not set ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_STK17TA8 is not set ++# CONFIG_RTC_DRV_M48T86 is not set ++# CONFIG_RTC_DRV_M48T35 is not set ++# CONFIG_RTC_DRV_M48T59 is not set ++# CONFIG_RTC_DRV_BQ4802 is not set ++# CONFIG_RTC_DRV_V3020 is not set ++ ++# ++# on-CPU RTC drivers ++# ++# CONFIG_DMADEVICES is not set ++CONFIG_REGULATOR=y ++# CONFIG_REGULATOR_DEBUG is not set ++# CONFIG_REGULATOR_FIXED_VOLTAGE is not set ++# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set ++# CONFIG_REGULATOR_BQ24022 is not set ++CONFIG_REGULATOR_TWL4030=y ++# CONFIG_UIO is not set ++# CONFIG_STAGING is not set ++ ++# ++# CBUS support ++# ++# CONFIG_CBUS is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++# CONFIG_EXT3_FS_XATTR is not set ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++# CONFIG_JBD_DEBUG is not set ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set ++CONFIG_FILE_LOCKING=y ++# CONFIG_XFS_FS is not set ++# CONFIG_OCFS2_FS is not set ++# CONFIG_BTRFS_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++CONFIG_QUOTA=y ++# CONFIG_QUOTA_NETLINK_INTERFACE is not set ++CONFIG_PRINT_QUOTA_WARNING=y ++CONFIG_QUOTA_TREE=y ++# CONFIG_QFMT_V1 is not set ++CONFIG_QFMT_V2=y ++CONFIG_QUOTACTL=y ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++CONFIG_MISC_FILESYSTEMS=y ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++CONFIG_JFFS2_FS_WRITEBUFFER=y ++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set ++# CONFIG_JFFS2_SUMMARY is not set ++# CONFIG_JFFS2_FS_XATTR is not set ++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set ++CONFIG_JFFS2_ZLIB=y ++# CONFIG_JFFS2_LZO is not set ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set ++# CONFIG_CRAMFS is not set ++# CONFIG_SQUASHFS is not set ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_ROMFS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++# CONFIG_NFS_V3_ACL is not set ++CONFIG_NFS_V4=y ++CONFIG_ROOT_NFS=y ++# CONFIG_NFSD is not set ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++CONFIG_SUNRPC_GSS=y ++# CONFIG_SUNRPC_REGISTER_V4 is not set ++CONFIG_RPCSEC_GSS_KRB5=y ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++# CONFIG_BSD_DISKLABEL is not set ++# CONFIG_MINIX_SUBPARTITION is not set ++# CONFIG_SOLARIS_X86_PARTITION is not set ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_KARMA_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++# CONFIG_SYSV68_PARTITION is not set ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++CONFIG_DEBUG_FS=y ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_DEBUG_SLAB is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++# CONFIG_DEBUG_MEMORY_INIT is not set ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++# CONFIG_DEBUG_NOTIFIERS is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_HAVE_FUNCTION_TRACER=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_IRQSOFF_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_TRACE_BRANCH_PROFILING is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++# CONFIG_DEBUG_LL is not set ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_CRYPTO=y ++ ++# ++# Crypto core or helper ++# ++# CONFIG_CRYPTO_FIPS is not set ++CONFIG_CRYPTO_ALGAPI=y ++CONFIG_CRYPTO_ALGAPI2=y ++CONFIG_CRYPTO_AEAD2=y ++CONFIG_CRYPTO_BLKCIPHER=y ++CONFIG_CRYPTO_BLKCIPHER2=y ++CONFIG_CRYPTO_HASH=y ++CONFIG_CRYPTO_HASH2=y ++CONFIG_CRYPTO_RNG2=y ++CONFIG_CRYPTO_MANAGER=y ++CONFIG_CRYPTO_MANAGER2=y ++# CONFIG_CRYPTO_GF128MUL is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++# CONFIG_CRYPTO_AUTHENC is not set ++# CONFIG_CRYPTO_TEST is not set ++ ++# ++# Authenticated Encryption with Associated Data ++# ++# CONFIG_CRYPTO_CCM is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_SEQIV is not set ++ ++# ++# Block modes ++# ++CONFIG_CRYPTO_CBC=y ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_CTS is not set ++CONFIG_CRYPTO_ECB=m ++# CONFIG_CRYPTO_LRW is not set ++CONFIG_CRYPTO_PCBC=m ++# CONFIG_CRYPTO_XTS is not set ++ ++# ++# Hash modes ++# ++# CONFIG_CRYPTO_HMAC is not set ++# CONFIG_CRYPTO_XCBC is not set ++ ++# ++# Digest ++# ++CONFIG_CRYPTO_CRC32C=y ++# CONFIG_CRYPTO_MD4 is not set ++CONFIG_CRYPTO_MD5=y ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_RMD128 is not set ++# CONFIG_CRYPTO_RMD160 is not set ++# CONFIG_CRYPTO_RMD256 is not set ++# CONFIG_CRYPTO_RMD320 is not set ++# CONFIG_CRYPTO_SHA1 is not set ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_WP512 is not set ++ ++# ++# Ciphers ++# ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++CONFIG_CRYPTO_DES=y ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_SALSA20 is not set ++# CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++ ++# ++# Compression ++# ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_LZO is not set ++ ++# ++# Random Number Generation ++# ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++CONFIG_CRYPTO_HW=y ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_GENERIC_FIND_LAST_BIT=y ++CONFIG_CRC_CCITT=y ++# CONFIG_CRC16 is not set ++# CONFIG_CRC_T10DIF is not set ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++CONFIG_LIBCRC32C=y ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y ++CONFIG_HAS_DMA=y +diff --git a/arch/arm/configs/dss_omap_3430sdp_defconfig b/arch/arm/configs/dss_omap_3430sdp_defconfig +new file mode 100644 +index 0000000..dc30dce +--- /dev/null ++++ b/arch/arm/configs/dss_omap_3430sdp_defconfig +@@ -0,0 +1,1634 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.29-omap1 ++# Thu Apr 2 11:11:24 2009 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++CONFIG_GENERIC_TIME=y ++CONFIG_GENERIC_CLOCKEVENTS=y ++CONFIG_MMU=y ++# CONFIG_NO_IOPORT is not set ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++CONFIG_SYSVIPC_SYSCTL=y ++# CONFIG_POSIX_MQUEUE is not set ++CONFIG_BSD_PROCESS_ACCT=y ++# CONFIG_BSD_PROCESS_ACCT_V3 is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_AUDIT is not set ++ ++# ++# RCU Subsystem ++# ++CONFIG_CLASSIC_RCU=y ++# CONFIG_TREE_RCU is not set ++# CONFIG_PREEMPT_RCU is not set ++# CONFIG_TREE_RCU_TRACE is not set ++# CONFIG_PREEMPT_RCU_TRACE is not set ++# CONFIG_IKCONFIG is not set ++CONFIG_LOG_BUF_SHIFT=14 ++CONFIG_GROUP_SCHED=y ++CONFIG_FAIR_GROUP_SCHED=y ++# CONFIG_RT_GROUP_SCHED is not set ++CONFIG_USER_SCHED=y ++# CONFIG_CGROUP_SCHED is not set ++# CONFIG_CGROUPS is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++# CONFIG_NAMESPACES is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++CONFIG_ANON_INODES=y ++CONFIG_EMBEDDED=y ++CONFIG_UID16=y ++# CONFIG_SYSCTL_SYSCALL is not set ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++CONFIG_KALLSYMS_EXTRA_PASS=y ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_COMPAT_BRK=y ++CONFIG_SLAB=y ++# CONFIG_SLUB is not set ++# CONFIG_SLOB is not set ++# CONFIG_PROFILING is not set ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y ++CONFIG_BLOCK=y ++# CONFIG_LBD is not set ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++CONFIG_DEFAULT_AS=y ++# CONFIG_DEFAULT_DEADLINE is not set ++# CONFIG_DEFAULT_CFQ is not set ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="anticipatory" ++CONFIG_FREEZER=y ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_S3C64XX is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++CONFIG_ARCH_OMAP=y ++# CONFIG_ARCH_MSM is not set ++# CONFIG_ARCH_W90X900 is not set ++ ++# ++# TI OMAP Implementations ++# ++CONFIG_ARCH_OMAP_OTG=y ++# CONFIG_ARCH_OMAP1 is not set ++# CONFIG_ARCH_OMAP2 is not set ++CONFIG_ARCH_OMAP3=y ++ ++# ++# OMAP Feature Selections ++# ++# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set ++# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set ++CONFIG_OMAP_SMARTREFLEX=y ++# CONFIG_OMAP_SMARTREFLEX_TESTING is not set ++CONFIG_OMAP_RESET_CLOCKS=y ++CONFIG_OMAP_BOOT_TAG=y ++CONFIG_OMAP_BOOT_REASON=y ++# CONFIG_OMAP_COMPONENT_VERSION is not set ++# CONFIG_OMAP_GPIO_SWITCH is not set ++CONFIG_OMAP_MUX=y ++CONFIG_OMAP_MUX_DEBUG=y ++CONFIG_OMAP_MUX_WARNINGS=y ++# CONFIG_OMAP_MCBSP is not set ++# CONFIG_OMAP_MBOX_FWK is not set ++# CONFIG_OMAP_MPU_TIMER is not set ++CONFIG_OMAP_32K_TIMER=y ++CONFIG_OMAP_32K_TIMER_HZ=128 ++CONFIG_OMAP_TICK_GPTIMER=1 ++CONFIG_OMAP_DM_TIMER=y ++CONFIG_OMAP_LL_DEBUG_UART1=y ++# CONFIG_OMAP_LL_DEBUG_UART2 is not set ++# CONFIG_OMAP_LL_DEBUG_UART3 is not set ++CONFIG_OMAP_SERIAL_WAKE=y ++CONFIG_ARCH_OMAP34XX=y ++CONFIG_ARCH_OMAP3430=y ++ ++# ++# OMAP Board Type ++# ++# CONFIG_MACH_NOKIA_RX51 is not set ++# CONFIG_MACH_OMAP_LDP is not set ++CONFIG_MACH_OMAP_3430SDP=y ++# CONFIG_MACH_OMAP3EVM is not set ++# CONFIG_MACH_OMAP3_BEAGLE is not set ++# CONFIG_MACH_OVERO is not set ++# CONFIG_MACH_OMAP3_PANDORA is not set ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_V7=y ++CONFIG_CPU_32v7=y ++CONFIG_CPU_ABRT_EV7=y ++CONFIG_CPU_PABRT_IFAR=y ++CONFIG_CPU_CACHE_V7=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V7=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++# CONFIG_ARM_THUMBEE is not set ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++CONFIG_HAS_TLS_REG=y ++# CONFIG_OUTER_CACHE is not set ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_TICK_ONESHOT=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=128 ++CONFIG_AEABI=y ++CONFIG_OABI_COMPAT=y ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=0 ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++# CONFIG_LEDS is not set ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8" ++# CONFIG_XIP_KERNEL is not set ++# CONFIG_KEXEC is not set ++ ++# ++# CPU Power Management ++# ++# CONFIG_CPU_FREQ is not set ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++CONFIG_FPE_NWFPE=y ++# CONFIG_FPE_NWFPE_XP is not set ++# CONFIG_FPE_FASTFPE is not set ++CONFIG_VFP=y ++CONFIG_VFPv3=y ++# CONFIG_NEON is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_HAVE_AOUT=y ++# CONFIG_BINFMT_AOUT is not set ++CONFIG_BINFMT_MISC=y ++ ++# ++# Power management options ++# ++CONFIG_PM=y ++# CONFIG_PM_DEBUG is not set ++CONFIG_PM_SLEEP=y ++CONFIG_SUSPEND=y ++CONFIG_SUSPEND_FREEZER=y ++# CONFIG_APM_EMULATION is not set ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++CONFIG_COMPAT_NET_DEV_OPS=y ++CONFIG_PACKET=y ++# CONFIG_PACKET_MMAP is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set ++CONFIG_NET_KEY=y ++# CONFIG_NET_KEY_MIGRATE is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_BOOTP=y ++CONFIG_IP_PNP_RARP=y ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++# CONFIG_IPV6 is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_NET_DSA is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set ++# CONFIG_DCB is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_AF_RXRPC is not set ++# CONFIG_PHONET is not set ++CONFIG_WIRELESS=y ++# CONFIG_CFG80211 is not set ++CONFIG_WIRELESS_OLD_REGULATORY=y ++# CONFIG_WIRELESS_EXT is not set ++# CONFIG_LIB80211 is not set ++# CONFIG_MAC80211 is not set ++# CONFIG_WIMAX is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++# CONFIG_FW_LOADER is not set ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++CONFIG_MTD_CONCAT=y ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_TESTS is not set ++# CONFIG_MTD_REDBOOT_PARTS is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++# CONFIG_MTD_AFS_PARTS is not set ++# CONFIG_MTD_AR7_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++# CONFIG_MTD_OOPS is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++CONFIG_MTD_CFI=y ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_GEN_PROBE=y ++# CONFIG_MTD_CFI_ADV_OPTIONS is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++CONFIG_MTD_CFI_INTELEXT=y ++# CONFIG_MTD_CFI_AMDSTD is not set ++# CONFIG_MTD_CFI_STAA is not set ++CONFIG_MTD_CFI_UTIL=y ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_PHYSMAP is not set ++# CONFIG_MTD_ARM_INTEGRATOR is not set ++CONFIG_MTD_OMAP_NOR=y ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_DATAFLASH is not set ++# CONFIG_MTD_M25P80 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++CONFIG_MTD_NAND=y ++# CONFIG_MTD_NAND_VERIFY_WRITE is not set ++CONFIG_MTD_NAND_ECC_SMC=y ++# CONFIG_MTD_NAND_MUSEUM_IDS is not set ++# CONFIG_MTD_NAND_GPIO is not set ++CONFIG_MTD_NAND_OMAP2=y ++CONFIG_MTD_NAND_IDS=y ++# CONFIG_MTD_NAND_DISKONCHIP is not set ++# CONFIG_MTD_NAND_NANDSIM is not set ++# CONFIG_MTD_NAND_PLATFORM is not set ++# CONFIG_MTD_ALAUDA is not set ++CONFIG_MTD_ONENAND=y ++CONFIG_MTD_ONENAND_VERIFY_WRITE=y ++# CONFIG_MTD_ONENAND_GENERIC is not set ++CONFIG_MTD_ONENAND_OMAP2=y ++# CONFIG_MTD_ONENAND_OTP is not set ++# CONFIG_MTD_ONENAND_2X_PROGRAM is not set ++# CONFIG_MTD_ONENAND_SIM is not set ++ ++# ++# LPDDR flash memory drivers ++# ++# CONFIG_MTD_LPDDR is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++# CONFIG_BLK_DEV_CRYPTOLOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++# CONFIG_BLK_DEV_UB is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=16384 ++# CONFIG_BLK_DEV_XIP is not set ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_ICS932S401 is not set ++# CONFIG_OMAP_STI is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++# CONFIG_C2PORT is not set ++ ++# ++# EEPROM support ++# ++# CONFIG_EEPROM_AT24 is not set ++# CONFIG_EEPROM_AT25 is not set ++# CONFIG_EEPROM_LEGACY is not set ++# CONFIG_EEPROM_93CX6 is not set ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++# CONFIG_CHR_DEV_SG is not set ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++# CONFIG_SCSI_MULTI_LUN is not set ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_LIBFC is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_DH is not set ++# CONFIG_ATA is not set ++# CONFIG_MD is not set ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++# CONFIG_VETH is not set ++# CONFIG_PHYLIB is not set ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=y ++# CONFIG_AX88796 is not set ++CONFIG_SMC91X=y ++# CONFIG_DM9000 is not set ++# CONFIG_ENC28J60 is not set ++# CONFIG_SMC911X is not set ++# CONFIG_SMSC911X is not set ++# CONFIG_DNET is not set ++# CONFIG_IBM_NEW_EMAC_ZMII is not set ++# CONFIG_IBM_NEW_EMAC_RGMII is not set ++# CONFIG_IBM_NEW_EMAC_TAH is not set ++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set ++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set ++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set ++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set ++# CONFIG_B44 is not set ++CONFIG_NETDEV_1000=y ++CONFIG_NETDEV_10000=y ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++# CONFIG_WLAN_80211 is not set ++# CONFIG_IWLWIFI_LEDS is not set ++ ++# ++# Enable WiMAX (Networking options) to see the WiMAX drivers ++# ++ ++# ++# USB Network Adapters ++# ++# CONFIG_USB_CATC is not set ++# CONFIG_USB_KAWETH is not set ++# CONFIG_USB_PEGASUS is not set ++# CONFIG_USB_RTL8150 is not set ++# CONFIG_USB_USBNET is not set ++# CONFIG_WAN is not set ++# CONFIG_PPP is not set ++# CONFIG_SLIP is not set ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++# CONFIG_INPUT_MOUSEDEV is not set ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++# CONFIG_KEYBOARD_ATKBD is not set ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++CONFIG_KEYBOARD_TWL4030=y ++# CONFIG_KEYBOARD_GPIO is not set ++# CONFIG_INPUT_MOUSE is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++CONFIG_INPUT_TOUCHSCREEN=y ++CONFIG_TOUCHSCREEN_ADS7846=y ++# CONFIG_TOUCHSCREEN_FUJITSU is not set ++# CONFIG_TOUCHSCREEN_GUNZE is not set ++# CONFIG_TOUCHSCREEN_ELO is not set ++# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set ++# CONFIG_TOUCHSCREEN_MTOUCH is not set ++# CONFIG_TOUCHSCREEN_INEXIO is not set ++# CONFIG_TOUCHSCREEN_MK712 is not set ++# CONFIG_TOUCHSCREEN_PENMOUNT is not set ++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set ++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set ++# CONFIG_TOUCHSCREEN_TSC2005 is not set ++# CONFIG_TOUCHSCREEN_TSC210X is not set ++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set ++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set ++# CONFIG_TOUCHSCREEN_TSC2007 is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++# CONFIG_SERIO is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++CONFIG_SERIAL_8250_CONSOLE=y ++CONFIG_SERIAL_8250_NR_UARTS=32 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++CONFIG_SERIAL_8250_EXTENDED=y ++CONFIG_SERIAL_8250_MANY_PORTS=y ++CONFIG_SERIAL_8250_SHARE_IRQ=y ++CONFIG_SERIAL_8250_DETECT_IRQ=y ++CONFIG_SERIAL_8250_RSA=y ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++CONFIG_I2C_HELPER_AUTO=y ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_OMAP=y ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++# CONFIG_I2C_TINY_USB is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_TWL4030_MADC is not set ++# CONFIG_TWL4030_POWEROFF is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++CONFIG_SPI=y ++# CONFIG_SPI_DEBUG is not set ++CONFIG_SPI_MASTER=y ++ ++# ++# SPI Master Controller Drivers ++# ++# CONFIG_SPI_BITBANG is not set ++# CONFIG_SPI_GPIO is not set ++CONFIG_SPI_OMAP24XX=y ++ ++# ++# SPI Protocol Masters ++# ++# CONFIG_SPI_TSC210X is not set ++# CONFIG_SPI_TSC2301 is not set ++# CONFIG_SPI_SPIDEV is not set ++# CONFIG_SPI_TLE62X0 is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++# CONFIG_DEBUG_GPIO is not set ++# CONFIG_GPIO_SYSFS is not set ++ ++# ++# Memory mapped GPIO expanders: ++# ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++CONFIG_GPIO_TWL4030=y ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_GPIO_MAX7301 is not set ++# CONFIG_GPIO_MCP23S08 is not set ++# CONFIG_W1 is not set ++# CONFIG_POWER_SUPPLY is not set ++# CONFIG_HWMON is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++CONFIG_WATCHDOG=y ++CONFIG_WATCHDOG_NOWAYOUT=y ++ ++# ++# Watchdog Device Drivers ++# ++# CONFIG_SOFT_WATCHDOG is not set ++CONFIG_OMAP_WATCHDOG=y ++ ++# ++# USB-based Watchdog Cards ++# ++# CONFIG_USBPCWATCHDOG is not set ++CONFIG_SSB_POSSIBLE=y ++ ++# ++# Sonics Silicon Backplane ++# ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++# CONFIG_TPS65010 is not set ++CONFIG_TWL4030_CORE=y ++# CONFIG_TWL4030_POWER is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++# CONFIG_MFD_PCF50633 is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++# CONFIG_VIDEO_DEV is not set ++# CONFIG_DVB_CORE is not set ++# CONFIG_VIDEO_MEDIA is not set ++ ++# ++# Multimedia drivers ++# ++CONFIG_DAB=y ++# CONFIG_USB_DABUSB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++CONFIG_VIDEO_OUTPUT_CONTROL=m ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++# CONFIG_FB_BOOT_VESA_SUPPORT is not set ++CONFIG_FB_CFB_FILLRECT=m ++CONFIG_FB_CFB_COPYAREA=m ++CONFIG_FB_CFB_IMAGEBLIT=m ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_FOREIGN_ENDIAN is not set ++# CONFIG_FB_SYS_FOPS is not set ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++# CONFIG_FB_OMAP_LCD_VGA is not set ++# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set ++CONFIG_OMAP2_DSS=m ++CONFIG_OMAP2_DSS_VRAM_SIZE=8 ++CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y ++# CONFIG_OMAP2_DSS_RFBI is not set ++CONFIG_OMAP2_DSS_VENC=y ++# CONFIG_OMAP2_DSS_SDI is not set ++# CONFIG_OMAP2_DSS_DSI is not set ++# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set ++CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 ++ ++# ++# OMAP2/3 Display Device Drivers ++# ++CONFIG_PANEL_GENERIC=m ++# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set ++CONFIG_PANEL_SHARP_LS037V7DW01=m ++# CONFIG_PANEL_N800 is not set ++# CONFIG_CTRL_BLIZZARD is not set ++CONFIG_FB_OMAP2=m ++CONFIG_FB_OMAP2_DEBUG_SUPPORT=y ++# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set ++CONFIG_FB_OMAP2_NUM_FBS=3 ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++# CONFIG_DISPLAY_SUPPORT is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE is not set ++# CONFIG_LOGO is not set ++# CONFIG_SOUND is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++# CONFIG_HID_DEBUG is not set ++# CONFIG_HIDRAW is not set ++ ++# ++# USB Input Devices ++# ++CONFIG_USB_HID=y ++# CONFIG_HID_PID is not set ++# CONFIG_USB_HIDDEV is not set ++ ++# ++# Special HID drivers ++# ++CONFIG_HID_COMPAT=y ++# CONFIG_HID_A4TECH is not set ++# CONFIG_HID_APPLE is not set ++# CONFIG_HID_BELKIN is not set ++# CONFIG_HID_CHERRY is not set ++# CONFIG_HID_CHICONY is not set ++# CONFIG_HID_CYPRESS is not set ++# CONFIG_HID_EZKEY is not set ++# CONFIG_HID_GYRATION is not set ++# CONFIG_HID_LOGITECH is not set ++# CONFIG_HID_MICROSOFT is not set ++# CONFIG_HID_MONTEREY is not set ++# CONFIG_HID_NTRIG is not set ++# CONFIG_HID_PANTHERLORD is not set ++# CONFIG_HID_PETALYNX is not set ++# CONFIG_HID_SAMSUNG is not set ++# CONFIG_HID_SONY is not set ++# CONFIG_HID_SUNPLUS is not set ++# CONFIG_GREENASIA_FF is not set ++# CONFIG_HID_TOPSEED is not set ++# CONFIG_THRUSTMASTER_FF is not set ++# CONFIG_ZEROPLUS_FF is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++CONFIG_USB_ARCH_HAS_EHCI=y ++CONFIG_USB=y ++CONFIG_USB_DEBUG=y ++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++# CONFIG_USB_DEVICE_CLASS is not set ++# CONFIG_USB_DYNAMIC_MINORS is not set ++CONFIG_USB_SUSPEND=y ++CONFIG_USB_OTG=y ++# CONFIG_USB_OTG_WHITELIST is not set ++# CONFIG_USB_OTG_BLACKLIST_HUB is not set ++CONFIG_USB_MON=y ++# CONFIG_USB_WUSB is not set ++# CONFIG_USB_WUSB_CBAF is not set ++ ++# ++# USB Host Controller Drivers ++# ++# CONFIG_USB_C67X00_HCD is not set ++CONFIG_USB_EHCI_HCD=m ++CONFIG_OMAP_EHCI_PHY_MODE=y ++# CONFIG_OMAP_EHCI_TLL_MODE is not set ++# CONFIG_USB_EHCI_ROOT_HUB_TT is not set ++# CONFIG_USB_EHCI_TT_NEWSCHED is not set ++# CONFIG_USB_OXU210HP_HCD is not set ++# CONFIG_USB_ISP116X_HCD is not set ++# CONFIG_USB_OHCI_HCD is not set ++# CONFIG_USB_SL811_HCD is not set ++# CONFIG_USB_R8A66597_HCD is not set ++# CONFIG_USB_HWA_HCD is not set ++CONFIG_USB_MUSB_HDRC=y ++CONFIG_USB_MUSB_SOC=y ++ ++# ++# OMAP 343x high speed USB support ++# ++# CONFIG_USB_MUSB_HOST is not set ++# CONFIG_USB_MUSB_PERIPHERAL is not set ++CONFIG_USB_MUSB_OTG=y ++CONFIG_USB_GADGET_MUSB_HDRC=y ++CONFIG_USB_MUSB_HDRC_HCD=y ++# CONFIG_MUSB_PIO_ONLY is not set ++CONFIG_USB_INVENTRA_DMA=y ++# CONFIG_USB_TI_CPPI_DMA is not set ++# CONFIG_USB_MUSB_DEBUG is not set ++ ++# ++# USB Device Class drivers ++# ++# CONFIG_USB_ACM is not set ++# CONFIG_USB_PRINTER is not set ++# CONFIG_USB_WDM is not set ++# CONFIG_USB_TMC is not set ++ ++# ++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; ++# ++ ++# ++# see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++CONFIG_USB_STORAGE_DEBUG=y ++# CONFIG_USB_STORAGE_DATAFAB is not set ++# CONFIG_USB_STORAGE_FREECOM is not set ++# CONFIG_USB_STORAGE_ISD200 is not set ++# CONFIG_USB_STORAGE_USBAT is not set ++# CONFIG_USB_STORAGE_SDDR09 is not set ++# CONFIG_USB_STORAGE_SDDR55 is not set ++# CONFIG_USB_STORAGE_JUMPSHOT is not set ++# CONFIG_USB_STORAGE_ALAUDA is not set ++# CONFIG_USB_STORAGE_ONETOUCH is not set ++# CONFIG_USB_STORAGE_KARMA is not set ++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set ++# CONFIG_USB_LIBUSUAL is not set ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++ ++# ++# USB port drivers ++# ++# CONFIG_USB_SERIAL is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_SEVSEG is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_BERRY_CHARGE is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_SISUSBVGA is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_IOWARRIOR is not set ++CONFIG_USB_TEST=y ++# CONFIG_USB_ISIGHTFW is not set ++# CONFIG_USB_VST is not set ++CONFIG_USB_GADGET=y ++CONFIG_USB_GADGET_DEBUG=y ++CONFIG_USB_GADGET_DEBUG_FILES=y ++# CONFIG_USB_GADGET_DEBUG_FS is not set ++CONFIG_USB_GADGET_VBUS_DRAW=2 ++CONFIG_USB_GADGET_SELECTED=y ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_ATMEL_USBA is not set ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_PXA25X is not set ++# CONFIG_USB_GADGET_PXA27X is not set ++# CONFIG_USB_GADGET_S3C2410 is not set ++# CONFIG_USB_GADGET_IMX is not set ++# CONFIG_USB_GADGET_M66592 is not set ++# CONFIG_USB_GADGET_AMD5536UDC is not set ++# CONFIG_USB_GADGET_FSL_QE is not set ++# CONFIG_USB_GADGET_CI13XXX is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++CONFIG_USB_GADGET_DUALSPEED=y ++CONFIG_USB_ZERO=m ++# CONFIG_USB_ZERO_HNPTEST is not set ++# CONFIG_USB_ETH is not set ++# CONFIG_USB_GADGETFS is not set ++# CONFIG_USB_FILE_STORAGE is not set ++# CONFIG_USB_G_SERIAL is not set ++# CONFIG_USB_MIDI_GADGET is not set ++# CONFIG_USB_G_PRINTER is not set ++# CONFIG_USB_CDC_COMPOSITE is not set ++ ++# ++# OTG and related infrastructure ++# ++CONFIG_USB_OTG_UTILS=y ++# CONFIG_USB_GPIO_VBUS is not set ++# CONFIG_ISP1301_OMAP is not set ++CONFIG_TWL4030_USB=y ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++# CONFIG_MMC_UNSAFE_RESUME is not set ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++# CONFIG_SDIO_UART is not set ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++# CONFIG_MMC_SDHCI is not set ++CONFIG_MMC_OMAP_HS=m ++# CONFIG_MMC_SPI is not set ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++# CONFIG_NEW_LEDS is not set ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++CONFIG_RTC_HCTOSYS=y ++CONFIG_RTC_HCTOSYS_DEVICE="rtc0" ++# CONFIG_RTC_DEBUG is not set ++ ++# ++# RTC interfaces ++# ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++# CONFIG_RTC_DRV_TEST is not set ++ ++# ++# I2C RTC drivers ++# ++# CONFIG_RTC_DRV_DS1307 is not set ++# CONFIG_RTC_DRV_DS1374 is not set ++# CONFIG_RTC_DRV_DS1672 is not set ++# CONFIG_RTC_DRV_MAX6900 is not set ++# CONFIG_RTC_DRV_RS5C372 is not set ++# CONFIG_RTC_DRV_ISL1208 is not set ++# CONFIG_RTC_DRV_X1205 is not set ++# CONFIG_RTC_DRV_PCF8563 is not set ++# CONFIG_RTC_DRV_PCF8583 is not set ++# CONFIG_RTC_DRV_M41T80 is not set ++CONFIG_RTC_DRV_TWL4030=y ++# CONFIG_RTC_DRV_S35390A is not set ++# CONFIG_RTC_DRV_FM3130 is not set ++# CONFIG_RTC_DRV_RX8581 is not set ++ ++# ++# SPI RTC drivers ++# ++# CONFIG_RTC_DRV_M41T94 is not set ++# CONFIG_RTC_DRV_DS1305 is not set ++# CONFIG_RTC_DRV_DS1390 is not set ++# CONFIG_RTC_DRV_MAX6902 is not set ++# CONFIG_RTC_DRV_R9701 is not set ++# CONFIG_RTC_DRV_RS5C348 is not set ++# CONFIG_RTC_DRV_DS3234 is not set ++ ++# ++# Platform RTC drivers ++# ++# CONFIG_RTC_DRV_CMOS is not set ++# CONFIG_RTC_DRV_DS1286 is not set ++# CONFIG_RTC_DRV_DS1511 is not set ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_STK17TA8 is not set ++# CONFIG_RTC_DRV_M48T86 is not set ++# CONFIG_RTC_DRV_M48T35 is not set ++# CONFIG_RTC_DRV_M48T59 is not set ++# CONFIG_RTC_DRV_BQ4802 is not set ++# CONFIG_RTC_DRV_V3020 is not set ++ ++# ++# on-CPU RTC drivers ++# ++# CONFIG_DMADEVICES is not set ++CONFIG_REGULATOR=y ++# CONFIG_REGULATOR_DEBUG is not set ++# CONFIG_REGULATOR_FIXED_VOLTAGE is not set ++# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set ++# CONFIG_REGULATOR_BQ24022 is not set ++CONFIG_REGULATOR_TWL4030=y ++# CONFIG_UIO is not set ++# CONFIG_STAGING is not set ++ ++# ++# CBUS support ++# ++# CONFIG_CBUS is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++# CONFIG_EXT3_FS_XATTR is not set ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++# CONFIG_JBD_DEBUG is not set ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set ++CONFIG_FILE_LOCKING=y ++# CONFIG_XFS_FS is not set ++# CONFIG_OCFS2_FS is not set ++# CONFIG_BTRFS_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++CONFIG_QUOTA=y ++# CONFIG_QUOTA_NETLINK_INTERFACE is not set ++CONFIG_PRINT_QUOTA_WARNING=y ++CONFIG_QUOTA_TREE=y ++# CONFIG_QFMT_V1 is not set ++CONFIG_QFMT_V2=y ++CONFIG_QUOTACTL=y ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++CONFIG_MISC_FILESYSTEMS=y ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++CONFIG_JFFS2_FS_WRITEBUFFER=y ++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set ++# CONFIG_JFFS2_SUMMARY is not set ++# CONFIG_JFFS2_FS_XATTR is not set ++CONFIG_JFFS2_COMPRESSION_OPTIONS=y ++CONFIG_JFFS2_ZLIB=y ++# CONFIG_JFFS2_LZO is not set ++CONFIG_JFFS2_RTIME=y ++# CONFIG_JFFS2_RUBIN is not set ++# CONFIG_JFFS2_CMODE_NONE is not set ++CONFIG_JFFS2_CMODE_PRIORITY=y ++# CONFIG_JFFS2_CMODE_SIZE is not set ++# CONFIG_JFFS2_CMODE_FAVOURLZO is not set ++# CONFIG_CRAMFS is not set ++# CONFIG_SQUASHFS is not set ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_ROMFS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++# CONFIG_NFS_V3_ACL is not set ++CONFIG_NFS_V4=y ++CONFIG_ROOT_NFS=y ++# CONFIG_NFSD is not set ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++CONFIG_SUNRPC_GSS=y ++# CONFIG_SUNRPC_REGISTER_V4 is not set ++CONFIG_RPCSEC_GSS_KRB5=y ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++# CONFIG_BSD_DISKLABEL is not set ++# CONFIG_MINIX_SUBPARTITION is not set ++# CONFIG_SOLARIS_X86_PARTITION is not set ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_KARMA_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++# CONFIG_SYSV68_PARTITION is not set ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++CONFIG_DEBUG_FS=y ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_TIMER_STATS is not set ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_DEBUG_SLAB is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++CONFIG_DEBUG_INFO=y ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++# CONFIG_DEBUG_MEMORY_INIT is not set ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++# CONFIG_DEBUG_NOTIFIERS is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_HAVE_FUNCTION_TRACER=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_IRQSOFF_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_TRACE_BRANCH_PROFILING is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++# CONFIG_DEBUG_LL is not set ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_CRYPTO=y ++ ++# ++# Crypto core or helper ++# ++# CONFIG_CRYPTO_FIPS is not set ++CONFIG_CRYPTO_ALGAPI=y ++CONFIG_CRYPTO_ALGAPI2=y ++CONFIG_CRYPTO_AEAD2=y ++CONFIG_CRYPTO_BLKCIPHER=y ++CONFIG_CRYPTO_BLKCIPHER2=y ++CONFIG_CRYPTO_HASH=y ++CONFIG_CRYPTO_HASH2=y ++CONFIG_CRYPTO_RNG2=y ++CONFIG_CRYPTO_MANAGER=y ++CONFIG_CRYPTO_MANAGER2=y ++# CONFIG_CRYPTO_GF128MUL is not set ++# CONFIG_CRYPTO_NULL is not set ++# CONFIG_CRYPTO_CRYPTD is not set ++# CONFIG_CRYPTO_AUTHENC is not set ++# CONFIG_CRYPTO_TEST is not set ++ ++# ++# Authenticated Encryption with Associated Data ++# ++# CONFIG_CRYPTO_CCM is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_SEQIV is not set ++ ++# ++# Block modes ++# ++CONFIG_CRYPTO_CBC=y ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_CTS is not set ++CONFIG_CRYPTO_ECB=m ++# CONFIG_CRYPTO_LRW is not set ++CONFIG_CRYPTO_PCBC=m ++# CONFIG_CRYPTO_XTS is not set ++ ++# ++# Hash modes ++# ++# CONFIG_CRYPTO_HMAC is not set ++# CONFIG_CRYPTO_XCBC is not set ++ ++# ++# Digest ++# ++CONFIG_CRYPTO_CRC32C=y ++# CONFIG_CRYPTO_MD4 is not set ++CONFIG_CRYPTO_MD5=y ++# CONFIG_CRYPTO_MICHAEL_MIC is not set ++# CONFIG_CRYPTO_RMD128 is not set ++# CONFIG_CRYPTO_RMD160 is not set ++# CONFIG_CRYPTO_RMD256 is not set ++# CONFIG_CRYPTO_RMD320 is not set ++# CONFIG_CRYPTO_SHA1 is not set ++# CONFIG_CRYPTO_SHA256 is not set ++# CONFIG_CRYPTO_SHA512 is not set ++# CONFIG_CRYPTO_TGR192 is not set ++# CONFIG_CRYPTO_WP512 is not set ++ ++# ++# Ciphers ++# ++# CONFIG_CRYPTO_AES is not set ++# CONFIG_CRYPTO_ANUBIS is not set ++# CONFIG_CRYPTO_ARC4 is not set ++# CONFIG_CRYPTO_BLOWFISH is not set ++# CONFIG_CRYPTO_CAMELLIA is not set ++# CONFIG_CRYPTO_CAST5 is not set ++# CONFIG_CRYPTO_CAST6 is not set ++CONFIG_CRYPTO_DES=y ++# CONFIG_CRYPTO_FCRYPT is not set ++# CONFIG_CRYPTO_KHAZAD is not set ++# CONFIG_CRYPTO_SALSA20 is not set ++# CONFIG_CRYPTO_SEED is not set ++# CONFIG_CRYPTO_SERPENT is not set ++# CONFIG_CRYPTO_TEA is not set ++# CONFIG_CRYPTO_TWOFISH is not set ++ ++# ++# Compression ++# ++# CONFIG_CRYPTO_DEFLATE is not set ++# CONFIG_CRYPTO_LZO is not set ++ ++# ++# Random Number Generation ++# ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++CONFIG_CRYPTO_HW=y ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_GENERIC_FIND_LAST_BIT=y ++CONFIG_CRC_CCITT=y ++# CONFIG_CRC16 is not set ++# CONFIG_CRC_T10DIF is not set ++# CONFIG_CRC_ITU_T is not set ++CONFIG_CRC32=y ++# CONFIG_CRC7 is not set ++CONFIG_LIBCRC32C=y ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y ++CONFIG_HAS_DMA=y +diff --git a/arch/arm/configs/dss_overo_defconfig b/arch/arm/configs/dss_overo_defconfig +new file mode 100644 +index 0000000..755a1b6 +--- /dev/null ++++ b/arch/arm/configs/dss_overo_defconfig +@@ -0,0 +1,1862 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.29-omap1 ++# Thu Apr 2 11:30:57 2009 ++# ++CONFIG_ARM=y ++CONFIG_SYS_SUPPORTS_APM_EMULATION=y ++CONFIG_GENERIC_GPIO=y ++CONFIG_GENERIC_TIME=y ++CONFIG_GENERIC_CLOCKEVENTS=y ++CONFIG_MMU=y ++# CONFIG_NO_IOPORT is not set ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_STACKTRACE_SUPPORT=y ++CONFIG_HAVE_LATENCYTOP_SUPPORT=y ++CONFIG_LOCKDEP_SUPPORT=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++# CONFIG_ARCH_HAS_ILOG2_U32 is not set ++# CONFIG_ARCH_HAS_ILOG2_U64 is not set ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y ++CONFIG_OPROFILE_ARMV7=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# General setup ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++CONFIG_LOCALVERSION="" ++CONFIG_LOCALVERSION_AUTO=y ++CONFIG_SWAP=y ++CONFIG_SYSVIPC=y ++CONFIG_SYSVIPC_SYSCTL=y ++# CONFIG_POSIX_MQUEUE is not set ++CONFIG_BSD_PROCESS_ACCT=y ++# CONFIG_BSD_PROCESS_ACCT_V3 is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_AUDIT is not set ++ ++# ++# RCU Subsystem ++# ++CONFIG_CLASSIC_RCU=y ++# CONFIG_TREE_RCU is not set ++# CONFIG_PREEMPT_RCU is not set ++# CONFIG_TREE_RCU_TRACE is not set ++# CONFIG_PREEMPT_RCU_TRACE is not set ++CONFIG_IKCONFIG=y ++CONFIG_IKCONFIG_PROC=y ++CONFIG_LOG_BUF_SHIFT=14 ++CONFIG_GROUP_SCHED=y ++CONFIG_FAIR_GROUP_SCHED=y ++# CONFIG_RT_GROUP_SCHED is not set ++CONFIG_USER_SCHED=y ++# CONFIG_CGROUP_SCHED is not set ++# CONFIG_CGROUPS is not set ++CONFIG_SYSFS_DEPRECATED=y ++CONFIG_SYSFS_DEPRECATED_V2=y ++# CONFIG_RELAY is not set ++# CONFIG_NAMESPACES is not set ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++CONFIG_ANON_INODES=y ++CONFIG_EMBEDDED=y ++CONFIG_UID16=y ++# CONFIG_SYSCTL_SYSCALL is not set ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++# CONFIG_ELF_CORE is not set ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_EPOLL=y ++CONFIG_SIGNALFD=y ++CONFIG_TIMERFD=y ++CONFIG_EVENTFD=y ++CONFIG_SHMEM=y ++CONFIG_AIO=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_SLUB_DEBUG=y ++# CONFIG_COMPAT_BRK is not set ++# CONFIG_SLAB is not set ++CONFIG_SLUB=y ++# CONFIG_SLOB is not set ++CONFIG_PROFILING=y ++CONFIG_TRACEPOINTS=y ++# CONFIG_MARKERS is not set ++CONFIG_OPROFILE=y ++CONFIG_HAVE_OPROFILE=y ++# CONFIG_KPROBES is not set ++CONFIG_HAVE_KPROBES=y ++CONFIG_HAVE_KRETPROBES=y ++CONFIG_HAVE_CLK=y ++CONFIG_HAVE_GENERIC_DMA_COHERENT=y ++CONFIG_SLABINFO=y ++CONFIG_RT_MUTEXES=y ++CONFIG_BASE_SMALL=0 ++CONFIG_MODULES=y ++# CONFIG_MODULE_FORCE_LOAD is not set ++CONFIG_MODULE_UNLOAD=y ++CONFIG_MODULE_FORCE_UNLOAD=y ++CONFIG_MODVERSIONS=y ++CONFIG_MODULE_SRCVERSION_ALL=y ++CONFIG_BLOCK=y ++CONFIG_LBD=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++# CONFIG_BLK_DEV_BSG is not set ++# CONFIG_BLK_DEV_INTEGRITY is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++CONFIG_IOSCHED_DEADLINE=y ++CONFIG_IOSCHED_CFQ=y ++# CONFIG_DEFAULT_AS is not set ++# CONFIG_DEFAULT_DEADLINE is not set ++CONFIG_DEFAULT_CFQ=y ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="cfq" ++CONFIG_FREEZER=y ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++# CONFIG_ARCH_AT91 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP13XX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_KIRKWOOD is not set ++# CONFIG_ARCH_KS8695 is not set ++# CONFIG_ARCH_NS9XXX is not set ++# CONFIG_ARCH_LOKI is not set ++# CONFIG_ARCH_MV78XX0 is not set ++# CONFIG_ARCH_MXC is not set ++# CONFIG_ARCH_ORION5X is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_S3C64XX is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_DAVINCI is not set ++CONFIG_ARCH_OMAP=y ++# CONFIG_ARCH_MSM is not set ++# CONFIG_ARCH_W90X900 is not set ++ ++# ++# TI OMAP Implementations ++# ++CONFIG_ARCH_OMAP_OTG=y ++# CONFIG_ARCH_OMAP1 is not set ++# CONFIG_ARCH_OMAP2 is not set ++CONFIG_ARCH_OMAP3=y ++ ++# ++# OMAP Feature Selections ++# ++# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set ++# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set ++CONFIG_OMAP_SMARTREFLEX=y ++# CONFIG_OMAP_SMARTREFLEX_TESTING is not set ++# CONFIG_OMAP_RESET_CLOCKS is not set ++CONFIG_OMAP_BOOT_TAG=y ++CONFIG_OMAP_BOOT_REASON=y ++# CONFIG_OMAP_COMPONENT_VERSION is not set ++# CONFIG_OMAP_GPIO_SWITCH is not set ++# CONFIG_OMAP_MUX is not set ++CONFIG_OMAP_MCBSP=y ++# CONFIG_OMAP_MBOX_FWK is not set ++# CONFIG_OMAP_MPU_TIMER is not set ++CONFIG_OMAP_32K_TIMER=y ++CONFIG_OMAP_32K_TIMER_HZ=128 ++CONFIG_OMAP_TICK_GPTIMER=1 ++CONFIG_OMAP_DM_TIMER=y ++# CONFIG_OMAP_LL_DEBUG_UART1 is not set ++# CONFIG_OMAP_LL_DEBUG_UART2 is not set ++CONFIG_OMAP_LL_DEBUG_UART3=y ++CONFIG_ARCH_OMAP34XX=y ++CONFIG_ARCH_OMAP3430=y ++ ++# ++# OMAP Board Type ++# ++# CONFIG_MACH_NOKIA_RX51 is not set ++# CONFIG_MACH_OMAP_LDP is not set ++# CONFIG_MACH_OMAP_3430SDP is not set ++# CONFIG_MACH_OMAP3EVM is not set ++# CONFIG_MACH_OMAP3_BEAGLE is not set ++CONFIG_MACH_OVERO=y ++# CONFIG_MACH_OMAP3_PANDORA is not set ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_32v6K=y ++CONFIG_CPU_V7=y ++CONFIG_CPU_32v7=y ++CONFIG_CPU_ABRT_EV7=y ++CONFIG_CPU_PABRT_IFAR=y ++CONFIG_CPU_CACHE_V7=y ++CONFIG_CPU_CACHE_VIPT=y ++CONFIG_CPU_COPY_V6=y ++CONFIG_CPU_TLB_V7=y ++CONFIG_CPU_HAS_ASID=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++CONFIG_ARM_THUMB=y ++CONFIG_ARM_THUMBEE=y ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_BPREDICT_DISABLE is not set ++CONFIG_HAS_TLS_REG=y ++# CONFIG_OUTER_CACHE is not set ++ ++# ++# Bus support ++# ++# CONFIG_PCI_SYSCALL is not set ++# CONFIG_ARCH_SUPPORTS_MSI is not set ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++CONFIG_TICK_ONESHOT=y ++CONFIG_NO_HZ=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y ++CONFIG_VMSPLIT_3G=y ++# CONFIG_VMSPLIT_2G is not set ++# CONFIG_VMSPLIT_1G is not set ++CONFIG_PAGE_OFFSET=0xC0000000 ++# CONFIG_PREEMPT is not set ++CONFIG_HZ=128 ++CONFIG_AEABI=y ++# CONFIG_OABI_COMPAT is not set ++CONFIG_ARCH_FLATMEM_HAS_HOLES=y ++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set ++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++CONFIG_PAGEFLAGS_EXTENDED=y ++CONFIG_SPLIT_PTLOCK_CPUS=4 ++# CONFIG_PHYS_ADDR_T_64BIT is not set ++CONFIG_ZONE_DMA_FLAG=0 ++CONFIG_VIRT_TO_BUS=y ++CONFIG_UNEVICTABLE_LRU=y ++CONFIG_LEDS=y ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.2.14:/tftpboot/rootfs ip=192.168.2.15 nolock,rsize=1024,wsize=1024 rw" ++# CONFIG_XIP_KERNEL is not set ++CONFIG_KEXEC=y ++CONFIG_ATAGS_PROC=y ++ ++# ++# CPU Power Management ++# ++CONFIG_CPU_FREQ=y ++CONFIG_CPU_FREQ_TABLE=y ++# CONFIG_CPU_FREQ_DEBUG is not set ++CONFIG_CPU_FREQ_STAT=y ++CONFIG_CPU_FREQ_STAT_DETAILS=y ++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y ++# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set ++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set ++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set ++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set ++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y ++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set ++CONFIG_CPU_FREQ_GOV_USERSPACE=y ++CONFIG_CPU_FREQ_GOV_ONDEMAND=y ++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set ++# CONFIG_CPU_IDLE is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++CONFIG_VFP=y ++CONFIG_VFPv3=y ++CONFIG_NEON=y ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++CONFIG_HAVE_AOUT=y ++CONFIG_BINFMT_AOUT=m ++CONFIG_BINFMT_MISC=y ++ ++# ++# Power management options ++# ++CONFIG_PM=y ++# CONFIG_PM_DEBUG is not set ++CONFIG_PM_SLEEP=y ++CONFIG_SUSPEND=y ++CONFIG_SUSPEND_FREEZER=y ++# CONFIG_APM_EMULATION is not set ++CONFIG_ARCH_SUSPEND_POSSIBLE=y ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++CONFIG_COMPAT_NET_DEV_OPS=y ++CONFIG_PACKET=y ++CONFIG_PACKET_MMAP=y ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_XFRM_MIGRATE is not set ++# CONFIG_XFRM_STATISTICS is not set ++CONFIG_NET_KEY=y ++# CONFIG_NET_KEY_MIGRATE is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++CONFIG_IP_PNP_DHCP=y ++CONFIG_IP_PNP_BOOTP=y ++CONFIG_IP_PNP_RARP=y ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++CONFIG_INET_TUNNEL=m ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++# CONFIG_INET_LRO is not set ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_TCP_MD5SIG is not set ++CONFIG_IPV6=m ++# CONFIG_IPV6_PRIVACY is not set ++# CONFIG_IPV6_ROUTER_PREF is not set ++# CONFIG_IPV6_OPTIMISTIC_DAD is not set ++# CONFIG_INET6_AH is not set ++# CONFIG_INET6_ESP is not set ++# CONFIG_INET6_IPCOMP is not set ++# CONFIG_IPV6_MIP6 is not set ++# CONFIG_INET6_XFRM_TUNNEL is not set ++# CONFIG_INET6_TUNNEL is not set ++CONFIG_INET6_XFRM_MODE_TRANSPORT=m ++CONFIG_INET6_XFRM_MODE_TUNNEL=m ++CONFIG_INET6_XFRM_MODE_BEET=m ++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set ++CONFIG_IPV6_SIT=m ++CONFIG_IPV6_NDISC_NODETYPE=y ++# CONFIG_IPV6_TUNNEL is not set ++# CONFIG_IPV6_MULTIPLE_TABLES is not set ++# CONFIG_IPV6_MROUTE is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++# CONFIG_IP_DCCP is not set ++# CONFIG_IP_SCTP is not set ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_NET_DSA is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++# CONFIG_NET_SCHED is not set ++# CONFIG_DCB is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_CAN is not set ++# CONFIG_IRDA is not set ++CONFIG_BT=y ++CONFIG_BT_L2CAP=y ++CONFIG_BT_SCO=y ++CONFIG_BT_RFCOMM=y ++CONFIG_BT_RFCOMM_TTY=y ++CONFIG_BT_BNEP=y ++CONFIG_BT_BNEP_MC_FILTER=y ++CONFIG_BT_BNEP_PROTO_FILTER=y ++CONFIG_BT_HIDP=y ++ ++# ++# Bluetooth device drivers ++# ++# CONFIG_BT_HCIBTSDIO is not set ++CONFIG_BT_HCIUART=y ++CONFIG_BT_HCIUART_H4=y ++CONFIG_BT_HCIUART_BCSP=y ++# CONFIG_BT_HCIUART_LL is not set ++# CONFIG_BT_HCIBRF6150 is not set ++# CONFIG_BT_HCIH4P is not set ++# CONFIG_BT_HCIVHCI is not set ++# CONFIG_AF_RXRPC is not set ++# CONFIG_PHONET is not set ++CONFIG_WIRELESS=y ++CONFIG_CFG80211=y ++# CONFIG_CFG80211_REG_DEBUG is not set ++CONFIG_NL80211=y ++CONFIG_WIRELESS_OLD_REGULATORY=y ++CONFIG_WIRELESS_EXT=y ++CONFIG_WIRELESS_EXT_SYSFS=y ++CONFIG_LIB80211=y ++CONFIG_LIB80211_CRYPT_WEP=m ++CONFIG_LIB80211_CRYPT_CCMP=m ++CONFIG_LIB80211_CRYPT_TKIP=m ++# CONFIG_LIB80211_DEBUG is not set ++CONFIG_MAC80211=y ++ ++# ++# Rate control algorithm selection ++# ++CONFIG_MAC80211_RC_PID=y ++CONFIG_MAC80211_RC_MINSTREL=y ++CONFIG_MAC80211_RC_DEFAULT_PID=y ++# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set ++CONFIG_MAC80211_RC_DEFAULT="pid" ++# CONFIG_MAC80211_MESH is not set ++CONFIG_MAC80211_LEDS=y ++# CONFIG_MAC80211_DEBUGFS is not set ++# CONFIG_MAC80211_DEBUG_MENU is not set ++# CONFIG_WIMAX is not set ++# CONFIG_RFKILL is not set ++# CONFIG_NET_9P is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++CONFIG_FW_LOADER=y ++CONFIG_FIRMWARE_IN_KERNEL=y ++CONFIG_EXTRA_FIRMWARE="" ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_DEBUG_DEVRES is not set ++# CONFIG_SYS_HYPERVISOR is not set ++# CONFIG_CONNECTOR is not set ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++CONFIG_MTD_CONCAT=y ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_TESTS is not set ++# CONFIG_MTD_REDBOOT_PARTS is not set ++# CONFIG_MTD_CMDLINE_PARTS is not set ++# CONFIG_MTD_AFS_PARTS is not set ++# CONFIG_MTD_AR7_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++CONFIG_MTD_CHAR=y ++CONFIG_MTD_BLKDEVS=y ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++# CONFIG_MTD_OOPS is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++# CONFIG_MTD_CFI is not set ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_DATAFLASH is not set ++# CONFIG_MTD_M25P80 is not set ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++CONFIG_MTD_NAND=y ++# CONFIG_MTD_NAND_VERIFY_WRITE is not set ++# CONFIG_MTD_NAND_ECC_SMC is not set ++# CONFIG_MTD_NAND_MUSEUM_IDS is not set ++# CONFIG_MTD_NAND_GPIO is not set ++CONFIG_MTD_NAND_OMAP2=y ++CONFIG_MTD_NAND_IDS=y ++# CONFIG_MTD_NAND_DISKONCHIP is not set ++# CONFIG_MTD_NAND_NANDSIM is not set ++# CONFIG_MTD_NAND_PLATFORM is not set ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# LPDDR flash memory drivers ++# ++# CONFIG_MTD_LPDDR is not set ++ ++# ++# UBI - Unsorted block images ++# ++# CONFIG_MTD_UBI is not set ++# CONFIG_PARPORT is not set ++CONFIG_BLK_DEV=y ++# CONFIG_BLK_DEV_COW_COMMON is not set ++CONFIG_BLK_DEV_LOOP=y ++CONFIG_BLK_DEV_CRYPTOLOOP=m ++# CONFIG_BLK_DEV_NBD is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=16384 ++# CONFIG_BLK_DEV_XIP is not set ++CONFIG_CDROM_PKTCDVD=m ++CONFIG_CDROM_PKTCDVD_BUFFERS=8 ++# CONFIG_CDROM_PKTCDVD_WCACHE is not set ++# CONFIG_ATA_OVER_ETH is not set ++CONFIG_MISC_DEVICES=y ++# CONFIG_ICS932S401 is not set ++# CONFIG_OMAP_STI is not set ++# CONFIG_ENCLOSURE_SERVICES is not set ++# CONFIG_C2PORT is not set ++ ++# ++# EEPROM support ++# ++# CONFIG_EEPROM_AT24 is not set ++# CONFIG_EEPROM_AT25 is not set ++# CONFIG_EEPROM_LEGACY is not set ++CONFIG_EEPROM_93CX6=m ++CONFIG_HAVE_IDE=y ++# CONFIG_IDE is not set ++ ++# ++# SCSI device support ++# ++CONFIG_RAID_ATTRS=m ++CONFIG_SCSI=y ++CONFIG_SCSI_DMA=y ++# CONFIG_SCSI_TGT is not set ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++CONFIG_CHR_DEV_SG=m ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++CONFIG_SCSI_MULTI_LUN=y ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++# CONFIG_SCSI_SCAN_ASYNC is not set ++CONFIG_SCSI_WAIT_SCAN=m ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++# CONFIG_SCSI_SRP_ATTRS is not set ++CONFIG_SCSI_LOWLEVEL=y ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_LIBFC is not set ++# CONFIG_SCSI_DEBUG is not set ++# CONFIG_SCSI_DH is not set ++# CONFIG_ATA is not set ++CONFIG_MD=y ++CONFIG_BLK_DEV_MD=m ++CONFIG_MD_LINEAR=m ++CONFIG_MD_RAID0=m ++CONFIG_MD_RAID1=m ++CONFIG_MD_RAID10=m ++CONFIG_MD_RAID456=m ++CONFIG_MD_RAID5_RESHAPE=y ++CONFIG_MD_MULTIPATH=m ++CONFIG_MD_FAULTY=m ++CONFIG_BLK_DEV_DM=m ++# CONFIG_DM_DEBUG is not set ++CONFIG_DM_CRYPT=m ++CONFIG_DM_SNAPSHOT=m ++CONFIG_DM_MIRROR=m ++CONFIG_DM_ZERO=m ++CONFIG_DM_MULTIPATH=m ++CONFIG_DM_DELAY=m ++# CONFIG_DM_UEVENT is not set ++CONFIG_NETDEVICES=y ++CONFIG_DUMMY=m ++# CONFIG_BONDING is not set ++# CONFIG_MACVLAN is not set ++# CONFIG_EQUALIZER is not set ++CONFIG_TUN=m ++# CONFIG_VETH is not set ++# CONFIG_NET_ETHERNET is not set ++# CONFIG_NETDEV_1000 is not set ++# CONFIG_NETDEV_10000 is not set ++ ++# ++# Wireless LAN ++# ++# CONFIG_WLAN_PRE80211 is not set ++CONFIG_WLAN_80211=y ++CONFIG_LIBERTAS=y ++CONFIG_LIBERTAS_SDIO=y ++CONFIG_LIBERTAS_DEBUG=y ++# CONFIG_LIBERTAS_THINFIRM is not set ++# CONFIG_MAC80211_HWSIM is not set ++CONFIG_P54_COMMON=m ++# CONFIG_IWLWIFI_LEDS is not set ++CONFIG_HOSTAP=m ++CONFIG_HOSTAP_FIRMWARE=y ++CONFIG_HOSTAP_FIRMWARE_NVRAM=y ++# CONFIG_B43 is not set ++# CONFIG_B43LEGACY is not set ++# CONFIG_RT2X00 is not set ++ ++# ++# Enable WiMAX (Networking options) to see the WiMAX drivers ++# ++# CONFIG_WAN is not set ++CONFIG_PPP=m ++# CONFIG_PPP_MULTILINK is not set ++# CONFIG_PPP_FILTER is not set ++CONFIG_PPP_ASYNC=m ++CONFIG_PPP_SYNC_TTY=m ++CONFIG_PPP_DEFLATE=m ++CONFIG_PPP_BSDCOMP=m ++CONFIG_PPP_MPPE=m ++CONFIG_PPPOE=m ++# CONFIG_PPPOL2TP is not set ++# CONFIG_SLIP is not set ++CONFIG_SLHC=m ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++# CONFIG_INPUT_POLLDEV is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++CONFIG_INPUT_MOUSEDEV_PSAUX=y ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++CONFIG_INPUT_EVDEV=y ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++CONFIG_INPUT_KEYBOARD=y ++# CONFIG_KEYBOARD_ATKBD is not set ++# CONFIG_KEYBOARD_SUNKBD is not set ++# CONFIG_KEYBOARD_LKKBD is not set ++# CONFIG_KEYBOARD_XTKBD is not set ++# CONFIG_KEYBOARD_NEWTON is not set ++# CONFIG_KEYBOARD_STOWAWAY is not set ++# CONFIG_KEYBOARD_TWL4030 is not set ++# CONFIG_KEYBOARD_LM8323 is not set ++# CONFIG_KEYBOARD_GPIO is not set ++CONFIG_INPUT_MOUSE=y ++CONFIG_MOUSE_PS2=y ++CONFIG_MOUSE_PS2_ALPS=y ++CONFIG_MOUSE_PS2_LOGIPS2PP=y ++CONFIG_MOUSE_PS2_SYNAPTICS=y ++CONFIG_MOUSE_PS2_TRACKPOINT=y ++# CONFIG_MOUSE_PS2_ELANTECH is not set ++# CONFIG_MOUSE_PS2_TOUCHKIT is not set ++# CONFIG_MOUSE_SERIAL is not set ++# CONFIG_MOUSE_APPLETOUCH is not set ++# CONFIG_MOUSE_BCM5974 is not set ++# CONFIG_MOUSE_VSXXXAA is not set ++# CONFIG_MOUSE_GPIO is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TABLET is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++CONFIG_SERIO=y ++CONFIG_SERIO_SERPORT=y ++CONFIG_SERIO_LIBPS2=y ++# CONFIG_SERIO_RAW is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_CONSOLE_TRANSLATIONS=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++CONFIG_VT_HW_CONSOLE_BINDING=y ++CONFIG_DEVKMEM=y ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++CONFIG_SERIAL_8250=y ++CONFIG_SERIAL_8250_CONSOLE=y ++CONFIG_SERIAL_8250_NR_UARTS=32 ++CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ++CONFIG_SERIAL_8250_EXTENDED=y ++CONFIG_SERIAL_8250_MANY_PORTS=y ++CONFIG_SERIAL_8250_SHARE_IRQ=y ++CONFIG_SERIAL_8250_DETECT_IRQ=y ++CONFIG_SERIAL_8250_RSA=y ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_IPMI_HANDLER is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_R3964 is not set ++# CONFIG_RAW_DRIVER is not set ++# CONFIG_TCG_TPM is not set ++CONFIG_I2C=y ++CONFIG_I2C_BOARDINFO=y ++CONFIG_I2C_CHARDEV=y ++CONFIG_I2C_HELPER_AUTO=y ++ ++# ++# I2C Hardware Bus support ++# ++ ++# ++# I2C system bus drivers (mostly embedded / system-on-chip) ++# ++# CONFIG_I2C_GPIO is not set ++# CONFIG_I2C_OCORES is not set ++CONFIG_I2C_OMAP=y ++# CONFIG_I2C_SIMTEC is not set ++ ++# ++# External I2C/SMBus adapter drivers ++# ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_TAOS_EVM is not set ++ ++# ++# Other I2C/SMBus bus drivers ++# ++# CONFIG_I2C_PCA_PLATFORM is not set ++# CONFIG_I2C_STUB is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_DS1682 is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_PCF8575 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++CONFIG_TWL4030_MADC=m ++CONFIG_TWL4030_POWEROFF=y ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_SENSORS_TSL2550 is not set ++# CONFIG_SENSORS_TSL2563 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++CONFIG_SPI=y ++# CONFIG_SPI_DEBUG is not set ++CONFIG_SPI_MASTER=y ++ ++# ++# SPI Master Controller Drivers ++# ++# CONFIG_SPI_BITBANG is not set ++# CONFIG_SPI_GPIO is not set ++CONFIG_SPI_OMAP24XX=y ++ ++# ++# SPI Protocol Masters ++# ++# CONFIG_SPI_TSC210X is not set ++# CONFIG_SPI_TSC2301 is not set ++# CONFIG_SPI_SPIDEV is not set ++# CONFIG_SPI_TLE62X0 is not set ++CONFIG_ARCH_REQUIRE_GPIOLIB=y ++CONFIG_GPIOLIB=y ++CONFIG_DEBUG_GPIO=y ++CONFIG_GPIO_SYSFS=y ++ ++# ++# Memory mapped GPIO expanders: ++# ++ ++# ++# I2C GPIO expanders: ++# ++# CONFIG_GPIO_MAX732X is not set ++# CONFIG_GPIO_PCA953X is not set ++# CONFIG_GPIO_PCF857X is not set ++CONFIG_GPIO_TWL4030=y ++ ++# ++# PCI GPIO expanders: ++# ++ ++# ++# SPI GPIO expanders: ++# ++# CONFIG_GPIO_MAX7301 is not set ++# CONFIG_GPIO_MCP23S08 is not set ++# CONFIG_W1 is not set ++CONFIG_POWER_SUPPLY=m ++# CONFIG_POWER_SUPPLY_DEBUG is not set ++# CONFIG_PDA_POWER is not set ++# CONFIG_BATTERY_DS2760 is not set ++# CONFIG_TWL4030_BCI_BATTERY is not set ++# CONFIG_BATTERY_BQ27x00 is not set ++CONFIG_HWMON=y ++# CONFIG_HWMON_VID is not set ++# CONFIG_SENSORS_AD7414 is not set ++# CONFIG_SENSORS_AD7418 is not set ++# CONFIG_SENSORS_ADCXX is not set ++# CONFIG_SENSORS_ADM1021 is not set ++# CONFIG_SENSORS_ADM1025 is not set ++# CONFIG_SENSORS_ADM1026 is not set ++# CONFIG_SENSORS_ADM1029 is not set ++# CONFIG_SENSORS_ADM1031 is not set ++# CONFIG_SENSORS_ADM9240 is not set ++# CONFIG_SENSORS_ADT7462 is not set ++# CONFIG_SENSORS_ADT7470 is not set ++# CONFIG_SENSORS_ADT7473 is not set ++# CONFIG_SENSORS_ADT7475 is not set ++# CONFIG_SENSORS_ATXP1 is not set ++# CONFIG_SENSORS_DS1621 is not set ++# CONFIG_SENSORS_F71805F is not set ++# CONFIG_SENSORS_F71882FG is not set ++# CONFIG_SENSORS_F75375S is not set ++# CONFIG_SENSORS_GL518SM is not set ++# CONFIG_SENSORS_GL520SM is not set ++# CONFIG_SENSORS_IT87 is not set ++# CONFIG_SENSORS_LM63 is not set ++# CONFIG_SENSORS_LM70 is not set ++# CONFIG_SENSORS_LM75 is not set ++# CONFIG_SENSORS_LM77 is not set ++# CONFIG_SENSORS_LM78 is not set ++# CONFIG_SENSORS_LM80 is not set ++# CONFIG_SENSORS_LM83 is not set ++# CONFIG_SENSORS_LM85 is not set ++# CONFIG_SENSORS_LM87 is not set ++# CONFIG_SENSORS_LM90 is not set ++# CONFIG_SENSORS_LM92 is not set ++# CONFIG_SENSORS_LM93 is not set ++# CONFIG_SENSORS_LTC4245 is not set ++# CONFIG_SENSORS_MAX1111 is not set ++# CONFIG_SENSORS_MAX1619 is not set ++# CONFIG_SENSORS_MAX6650 is not set ++# CONFIG_SENSORS_PC87360 is not set ++# CONFIG_SENSORS_PC87427 is not set ++# CONFIG_SENSORS_DME1737 is not set ++# CONFIG_SENSORS_SMSC47M1 is not set ++# CONFIG_SENSORS_SMSC47M192 is not set ++# CONFIG_SENSORS_SMSC47B397 is not set ++# CONFIG_SENSORS_ADS7828 is not set ++# CONFIG_SENSORS_THMC50 is not set ++# CONFIG_SENSORS_VT1211 is not set ++# CONFIG_SENSORS_W83781D is not set ++# CONFIG_SENSORS_W83791D is not set ++# CONFIG_SENSORS_W83792D is not set ++# CONFIG_SENSORS_W83793 is not set ++# CONFIG_SENSORS_W83L785TS is not set ++# CONFIG_SENSORS_W83L786NG is not set ++# CONFIG_SENSORS_W83627HF is not set ++# CONFIG_SENSORS_W83627EHF is not set ++# CONFIG_SENSORS_TSC210X is not set ++CONFIG_SENSORS_OMAP34XX=y ++# CONFIG_HWMON_DEBUG_CHIP is not set ++# CONFIG_THERMAL is not set ++# CONFIG_THERMAL_HWMON is not set ++CONFIG_WATCHDOG=y ++CONFIG_WATCHDOG_NOWAYOUT=y ++ ++# ++# Watchdog Device Drivers ++# ++# CONFIG_SOFT_WATCHDOG is not set ++CONFIG_OMAP_WATCHDOG=y ++CONFIG_SSB_POSSIBLE=y ++ ++# ++# Sonics Silicon Backplane ++# ++# CONFIG_SSB is not set ++ ++# ++# Multifunction device drivers ++# ++# CONFIG_MFD_CORE is not set ++# CONFIG_MFD_SM501 is not set ++# CONFIG_MFD_ASIC3 is not set ++# CONFIG_HTC_EGPIO is not set ++# CONFIG_HTC_PASIC3 is not set ++# CONFIG_TPS65010 is not set ++CONFIG_TWL4030_CORE=y ++# CONFIG_TWL4030_POWER is not set ++# CONFIG_MFD_TMIO is not set ++# CONFIG_MFD_T7L66XB is not set ++# CONFIG_MFD_TC6387XB is not set ++# CONFIG_MFD_TC6393XB is not set ++# CONFIG_PMIC_DA903X is not set ++# CONFIG_MFD_WM8400 is not set ++# CONFIG_MFD_WM8350_I2C is not set ++# CONFIG_MFD_PCF50633 is not set ++ ++# ++# Multimedia devices ++# ++ ++# ++# Multimedia core support ++# ++CONFIG_VIDEO_DEV=m ++CONFIG_VIDEO_V4L2_COMMON=m ++CONFIG_VIDEO_ALLOW_V4L1=y ++CONFIG_VIDEO_V4L1_COMPAT=y ++CONFIG_DVB_CORE=m ++CONFIG_VIDEO_MEDIA=m ++ ++# ++# Multimedia drivers ++# ++CONFIG_MEDIA_ATTACH=y ++CONFIG_MEDIA_TUNER=m ++# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set ++CONFIG_MEDIA_TUNER_SIMPLE=m ++CONFIG_MEDIA_TUNER_TDA8290=m ++CONFIG_MEDIA_TUNER_TDA9887=m ++CONFIG_MEDIA_TUNER_TEA5761=m ++CONFIG_MEDIA_TUNER_TEA5767=m ++CONFIG_MEDIA_TUNER_MT20XX=m ++CONFIG_MEDIA_TUNER_XC2028=m ++CONFIG_MEDIA_TUNER_XC5000=m ++CONFIG_VIDEO_V4L2=m ++CONFIG_VIDEO_V4L1=m ++CONFIG_VIDEO_CAPTURE_DRIVERS=y ++# CONFIG_VIDEO_ADV_DEBUG is not set ++# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set ++CONFIG_VIDEO_HELPER_CHIPS_AUTO=y ++# CONFIG_VIDEO_VIVI is not set ++# CONFIG_VIDEO_CPIA is not set ++# CONFIG_VIDEO_SAA5246A is not set ++# CONFIG_VIDEO_SAA5249 is not set ++# CONFIG_SOC_CAMERA is not set ++CONFIG_RADIO_ADAPTERS=y ++# CONFIG_RADIO_TEA5764 is not set ++# CONFIG_DVB_DYNAMIC_MINORS is not set ++CONFIG_DVB_CAPTURE_DRIVERS=y ++# CONFIG_TTPCI_EEPROM is not set ++# CONFIG_DVB_B2C2_FLEXCOP is not set ++ ++# ++# Supported DVB Frontends ++# ++ ++# ++# Customise DVB Frontends ++# ++# CONFIG_DVB_FE_CUSTOMISE is not set ++ ++# ++# Multistandard (satellite) frontends ++# ++# CONFIG_DVB_STB0899 is not set ++# CONFIG_DVB_STB6100 is not set ++ ++# ++# DVB-S (satellite) frontends ++# ++CONFIG_DVB_CX24110=m ++CONFIG_DVB_CX24123=m ++CONFIG_DVB_MT312=m ++CONFIG_DVB_S5H1420=m ++# CONFIG_DVB_STV0288 is not set ++# CONFIG_DVB_STB6000 is not set ++CONFIG_DVB_STV0299=m ++CONFIG_DVB_TDA8083=m ++CONFIG_DVB_TDA10086=m ++# CONFIG_DVB_TDA8261 is not set ++CONFIG_DVB_VES1X93=m ++CONFIG_DVB_TUNER_ITD1000=m ++# CONFIG_DVB_TUNER_CX24113 is not set ++CONFIG_DVB_TDA826X=m ++CONFIG_DVB_TUA6100=m ++# CONFIG_DVB_CX24116 is not set ++# CONFIG_DVB_SI21XX is not set ++ ++# ++# DVB-T (terrestrial) frontends ++# ++CONFIG_DVB_SP8870=m ++CONFIG_DVB_SP887X=m ++CONFIG_DVB_CX22700=m ++CONFIG_DVB_CX22702=m ++# CONFIG_DVB_DRX397XD is not set ++CONFIG_DVB_L64781=m ++CONFIG_DVB_TDA1004X=m ++CONFIG_DVB_NXT6000=m ++CONFIG_DVB_MT352=m ++CONFIG_DVB_ZL10353=m ++CONFIG_DVB_DIB3000MB=m ++CONFIG_DVB_DIB3000MC=m ++CONFIG_DVB_DIB7000M=m ++CONFIG_DVB_DIB7000P=m ++CONFIG_DVB_TDA10048=m ++ ++# ++# DVB-C (cable) frontends ++# ++CONFIG_DVB_VES1820=m ++CONFIG_DVB_TDA10021=m ++CONFIG_DVB_TDA10023=m ++CONFIG_DVB_STV0297=m ++ ++# ++# ATSC (North American/Korean Terrestrial/Cable DTV) frontends ++# ++CONFIG_DVB_NXT200X=m ++# CONFIG_DVB_OR51211 is not set ++# CONFIG_DVB_OR51132 is not set ++CONFIG_DVB_BCM3510=m ++CONFIG_DVB_LGDT330X=m ++# CONFIG_DVB_LGDT3304 is not set ++CONFIG_DVB_S5H1409=m ++CONFIG_DVB_AU8522=m ++CONFIG_DVB_S5H1411=m ++ ++# ++# ISDB-T (terrestrial) frontends ++# ++# CONFIG_DVB_S921 is not set ++ ++# ++# Digital terrestrial only tuners/PLL ++# ++CONFIG_DVB_PLL=m ++CONFIG_DVB_TUNER_DIB0070=m ++ ++# ++# SEC control devices for DVB-S ++# ++CONFIG_DVB_LNBP21=m ++# CONFIG_DVB_ISL6405 is not set ++CONFIG_DVB_ISL6421=m ++# CONFIG_DVB_LGS8GL5 is not set ++ ++# ++# Tools to develop new frontends ++# ++# CONFIG_DVB_DUMMY_FE is not set ++# CONFIG_DVB_AF9013 is not set ++# CONFIG_DAB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_VGASTATE is not set ++# CONFIG_VIDEO_OUTPUT_CONTROL is not set ++CONFIG_FB=y ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB_DDC is not set ++# CONFIG_FB_BOOT_VESA_SUPPORT is not set ++CONFIG_FB_CFB_FILLRECT=m ++CONFIG_FB_CFB_COPYAREA=m ++CONFIG_FB_CFB_IMAGEBLIT=m ++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set ++# CONFIG_FB_SYS_FILLRECT is not set ++# CONFIG_FB_SYS_COPYAREA is not set ++# CONFIG_FB_SYS_IMAGEBLIT is not set ++# CONFIG_FB_FOREIGN_ENDIAN is not set ++# CONFIG_FB_SYS_FOPS is not set ++# CONFIG_FB_SVGALIB is not set ++# CONFIG_FB_MACMODES is not set ++# CONFIG_FB_BACKLIGHT is not set ++# CONFIG_FB_MODE_HELPERS is not set ++# CONFIG_FB_TILEBLITTING is not set ++ ++# ++# Frame buffer hardware drivers ++# ++# CONFIG_FB_S1D13XXX is not set ++# CONFIG_FB_VIRTUAL is not set ++# CONFIG_FB_METRONOME is not set ++# CONFIG_FB_MB862XX is not set ++# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set ++CONFIG_OMAP2_DSS=m ++CONFIG_OMAP2_DSS_VRAM_SIZE=12 ++CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y ++# CONFIG_OMAP2_DSS_RFBI is not set ++CONFIG_OMAP2_DSS_VENC=y ++# CONFIG_OMAP2_DSS_SDI is not set ++# CONFIG_OMAP2_DSS_DSI is not set ++# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set ++CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 ++ ++# ++# OMAP2/3 Display Device Drivers ++# ++CONFIG_PANEL_GENERIC=m ++CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C=m ++# CONFIG_PANEL_SHARP_LS037V7DW01 is not set ++# CONFIG_PANEL_N800 is not set ++# CONFIG_CTRL_BLIZZARD is not set ++CONFIG_FB_OMAP2=m ++CONFIG_FB_OMAP2_DEBUG_SUPPORT=y ++# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set ++CONFIG_FB_OMAP2_NUM_FBS=3 ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Display device support ++# ++CONFIG_DISPLAY_SUPPORT=y ++ ++# ++# Display hardware drivers ++# ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++# CONFIG_FRAMEBUFFER_CONSOLE is not set ++# CONFIG_LOGO is not set ++CONFIG_SOUND=y ++CONFIG_SOUND_OSS_CORE=y ++CONFIG_SND=y ++CONFIG_SND_TIMER=y ++CONFIG_SND_PCM=y ++CONFIG_SND_SEQUENCER=m ++# CONFIG_SND_SEQ_DUMMY is not set ++CONFIG_SND_OSSEMUL=y ++CONFIG_SND_MIXER_OSS=y ++CONFIG_SND_PCM_OSS=y ++CONFIG_SND_PCM_OSS_PLUGINS=y ++CONFIG_SND_SEQUENCER_OSS=y ++# CONFIG_SND_HRTIMER is not set ++# CONFIG_SND_DYNAMIC_MINORS is not set ++CONFIG_SND_SUPPORT_OLD_API=y ++CONFIG_SND_VERBOSE_PROCFS=y ++CONFIG_SND_VERBOSE_PRINTK=y ++CONFIG_SND_DEBUG=y ++# CONFIG_SND_DEBUG_VERBOSE is not set ++# CONFIG_SND_PCM_XRUN_DEBUG is not set ++CONFIG_SND_DRIVERS=y ++# CONFIG_SND_DUMMY is not set ++# CONFIG_SND_VIRMIDI is not set ++# CONFIG_SND_MTPAV is not set ++# CONFIG_SND_SERIAL_U16550 is not set ++# CONFIG_SND_MPU401 is not set ++CONFIG_SND_ARM=y ++CONFIG_SND_SPI=y ++CONFIG_SND_SOC=y ++CONFIG_SND_OMAP_SOC=y ++CONFIG_SND_OMAP_SOC_MCBSP=y ++CONFIG_SND_OMAP_SOC_OVERO=y ++CONFIG_SND_SOC_I2C_AND_SPI=y ++# CONFIG_SND_SOC_ALL_CODECS is not set ++CONFIG_SND_SOC_TWL4030=y ++# CONFIG_SOUND_PRIME is not set ++CONFIG_HID_SUPPORT=y ++CONFIG_HID=y ++CONFIG_HID_DEBUG=y ++# CONFIG_HIDRAW is not set ++# CONFIG_HID_PID is not set ++ ++# ++# Special HID drivers ++# ++CONFIG_HID_COMPAT=y ++# CONFIG_HID_APPLE is not set ++CONFIG_USB_SUPPORT=y ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++CONFIG_USB_ARCH_HAS_EHCI=y ++# CONFIG_USB is not set ++# CONFIG_USB_OTG_WHITELIST is not set ++# CONFIG_USB_OTG_BLACKLIST_HUB is not set ++CONFIG_USB_MUSB_HDRC=y ++CONFIG_USB_MUSB_SOC=y ++ ++# ++# OMAP 343x high speed USB support ++# ++# CONFIG_USB_MUSB_HOST is not set ++CONFIG_USB_MUSB_PERIPHERAL=y ++# CONFIG_USB_MUSB_OTG is not set ++CONFIG_USB_GADGET_MUSB_HDRC=y ++# CONFIG_MUSB_PIO_ONLY is not set ++CONFIG_USB_INVENTRA_DMA=y ++# CONFIG_USB_TI_CPPI_DMA is not set ++# CONFIG_USB_MUSB_DEBUG is not set ++ ++# ++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; ++# ++CONFIG_USB_GADGET=y ++# CONFIG_USB_GADGET_DEBUG is not set ++# CONFIG_USB_GADGET_DEBUG_FILES is not set ++# CONFIG_USB_GADGET_DEBUG_FS is not set ++CONFIG_USB_GADGET_VBUS_DRAW=2 ++CONFIG_USB_GADGET_SELECTED=y ++# CONFIG_USB_GADGET_AT91 is not set ++# CONFIG_USB_GADGET_ATMEL_USBA is not set ++# CONFIG_USB_GADGET_FSL_USB2 is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++# CONFIG_USB_GADGET_PXA25X is not set ++# CONFIG_USB_GADGET_PXA27X is not set ++# CONFIG_USB_GADGET_S3C2410 is not set ++# CONFIG_USB_GADGET_IMX is not set ++# CONFIG_USB_GADGET_M66592 is not set ++# CONFIG_USB_GADGET_AMD5536UDC is not set ++# CONFIG_USB_GADGET_FSL_QE is not set ++# CONFIG_USB_GADGET_CI13XXX is not set ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++CONFIG_USB_GADGET_DUALSPEED=y ++# CONFIG_USB_ZERO is not set ++CONFIG_USB_ETH=y ++CONFIG_USB_ETH_RNDIS=y ++# CONFIG_USB_GADGETFS is not set ++# CONFIG_USB_FILE_STORAGE is not set ++# CONFIG_USB_G_SERIAL is not set ++# CONFIG_USB_MIDI_GADGET is not set ++# CONFIG_USB_G_PRINTER is not set ++# CONFIG_USB_CDC_COMPOSITE is not set ++ ++# ++# OTG and related infrastructure ++# ++CONFIG_USB_OTG_UTILS=y ++# CONFIG_USB_GPIO_VBUS is not set ++# CONFIG_ISP1301_OMAP is not set ++CONFIG_TWL4030_USB=y ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++CONFIG_MMC_UNSAFE_RESUME=y ++ ++# ++# MMC/SD/SDIO Card Drivers ++# ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_BLOCK_BOUNCE=y ++CONFIG_SDIO_UART=y ++# CONFIG_MMC_TEST is not set ++ ++# ++# MMC/SD/SDIO Host Controller Drivers ++# ++# CONFIG_MMC_SDHCI is not set ++CONFIG_MMC_OMAP_HS=y ++# CONFIG_MMC_SPI is not set ++# CONFIG_MEMSTICK is not set ++# CONFIG_ACCESSIBILITY is not set ++CONFIG_NEW_LEDS=y ++CONFIG_LEDS_CLASS=y ++ ++# ++# LED drivers ++# ++# CONFIG_LEDS_OMAP_DEBUG is not set ++# CONFIG_LEDS_OMAP is not set ++# CONFIG_LEDS_OMAP_PWM is not set ++# CONFIG_LEDS_PCA9532 is not set ++CONFIG_LEDS_GPIO=y ++# CONFIG_LEDS_LP5521 is not set ++# CONFIG_LEDS_PCA955X is not set ++ ++# ++# LED Triggers ++# ++CONFIG_LEDS_TRIGGERS=y ++CONFIG_LEDS_TRIGGER_TIMER=y ++CONFIG_LEDS_TRIGGER_HEARTBEAT=y ++# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set ++# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++CONFIG_RTC_HCTOSYS=y ++CONFIG_RTC_HCTOSYS_DEVICE="rtc0" ++# CONFIG_RTC_DEBUG is not set ++ ++# ++# RTC interfaces ++# ++CONFIG_RTC_INTF_SYSFS=y ++CONFIG_RTC_INTF_PROC=y ++CONFIG_RTC_INTF_DEV=y ++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set ++# CONFIG_RTC_DRV_TEST is not set ++ ++# ++# I2C RTC drivers ++# ++# CONFIG_RTC_DRV_DS1307 is not set ++# CONFIG_RTC_DRV_DS1374 is not set ++# CONFIG_RTC_DRV_DS1672 is not set ++# CONFIG_RTC_DRV_MAX6900 is not set ++# CONFIG_RTC_DRV_RS5C372 is not set ++# CONFIG_RTC_DRV_ISL1208 is not set ++# CONFIG_RTC_DRV_X1205 is not set ++# CONFIG_RTC_DRV_PCF8563 is not set ++# CONFIG_RTC_DRV_PCF8583 is not set ++# CONFIG_RTC_DRV_M41T80 is not set ++CONFIG_RTC_DRV_TWL4030=y ++# CONFIG_RTC_DRV_S35390A is not set ++# CONFIG_RTC_DRV_FM3130 is not set ++# CONFIG_RTC_DRV_RX8581 is not set ++ ++# ++# SPI RTC drivers ++# ++# CONFIG_RTC_DRV_M41T94 is not set ++# CONFIG_RTC_DRV_DS1305 is not set ++# CONFIG_RTC_DRV_DS1390 is not set ++# CONFIG_RTC_DRV_MAX6902 is not set ++# CONFIG_RTC_DRV_R9701 is not set ++# CONFIG_RTC_DRV_RS5C348 is not set ++# CONFIG_RTC_DRV_DS3234 is not set ++ ++# ++# Platform RTC drivers ++# ++# CONFIG_RTC_DRV_CMOS is not set ++# CONFIG_RTC_DRV_DS1286 is not set ++# CONFIG_RTC_DRV_DS1511 is not set ++# CONFIG_RTC_DRV_DS1553 is not set ++# CONFIG_RTC_DRV_DS1742 is not set ++# CONFIG_RTC_DRV_STK17TA8 is not set ++# CONFIG_RTC_DRV_M48T86 is not set ++# CONFIG_RTC_DRV_M48T35 is not set ++# CONFIG_RTC_DRV_M48T59 is not set ++# CONFIG_RTC_DRV_BQ4802 is not set ++# CONFIG_RTC_DRV_V3020 is not set ++ ++# ++# on-CPU RTC drivers ++# ++# CONFIG_DMADEVICES is not set ++CONFIG_REGULATOR=y ++# CONFIG_REGULATOR_DEBUG is not set ++# CONFIG_REGULATOR_FIXED_VOLTAGE is not set ++# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set ++# CONFIG_REGULATOR_BQ24022 is not set ++CONFIG_REGULATOR_TWL4030=y ++# CONFIG_UIO is not set ++# CONFIG_STAGING is not set ++ ++# ++# CBUS support ++# ++# CONFIG_CBUS is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++CONFIG_EXT3_FS=y ++# CONFIG_EXT3_FS_XATTR is not set ++# CONFIG_EXT4_FS is not set ++CONFIG_JBD=y ++# CONFIG_JBD_DEBUG is not set ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++CONFIG_FS_POSIX_ACL=y ++CONFIG_FILE_LOCKING=y ++CONFIG_XFS_FS=m ++# CONFIG_XFS_QUOTA is not set ++# CONFIG_XFS_POSIX_ACL is not set ++# CONFIG_XFS_RT is not set ++# CONFIG_XFS_DEBUG is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++# CONFIG_BTRFS_FS is not set ++CONFIG_DNOTIFY=y ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++CONFIG_QUOTA=y ++# CONFIG_QUOTA_NETLINK_INTERFACE is not set ++CONFIG_PRINT_QUOTA_WARNING=y ++CONFIG_QUOTA_TREE=y ++# CONFIG_QFMT_V1 is not set ++CONFIG_QFMT_V2=y ++CONFIG_QUOTACTL=y ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++CONFIG_FUSE_FS=m ++ ++# ++# CD-ROM/DVD Filesystems ++# ++CONFIG_ISO9660_FS=m ++CONFIG_JOLIET=y ++CONFIG_ZISOFS=y ++CONFIG_UDF_FS=m ++CONFIG_UDF_NLS=y ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++CONFIG_MSDOS_FS=y ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_PROC_PAGE_MONITOR=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++# CONFIG_CONFIGFS_FS is not set ++CONFIG_MISC_FILESYSTEMS=y ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_FS_DEBUG=0 ++CONFIG_JFFS2_FS_WRITEBUFFER=y ++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set ++CONFIG_JFFS2_SUMMARY=y ++CONFIG_JFFS2_FS_XATTR=y ++CONFIG_JFFS2_FS_POSIX_ACL=y ++CONFIG_JFFS2_FS_SECURITY=y ++CONFIG_JFFS2_COMPRESSION_OPTIONS=y ++CONFIG_JFFS2_ZLIB=y ++CONFIG_JFFS2_LZO=y ++CONFIG_JFFS2_RTIME=y ++CONFIG_JFFS2_RUBIN=y ++# CONFIG_JFFS2_CMODE_NONE is not set ++CONFIG_JFFS2_CMODE_PRIORITY=y ++# CONFIG_JFFS2_CMODE_SIZE is not set ++# CONFIG_JFFS2_CMODE_FAVOURLZO is not set ++# CONFIG_CRAMFS is not set ++# CONFIG_SQUASHFS is not set ++# CONFIG_VXFS_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_OMFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_ROMFS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++CONFIG_NETWORK_FILESYSTEMS=y ++CONFIG_NFS_FS=y ++CONFIG_NFS_V3=y ++# CONFIG_NFS_V3_ACL is not set ++CONFIG_NFS_V4=y ++CONFIG_ROOT_NFS=y ++# CONFIG_NFSD is not set ++CONFIG_LOCKD=y ++CONFIG_LOCKD_V4=y ++CONFIG_EXPORTFS=m ++CONFIG_NFS_COMMON=y ++CONFIG_SUNRPC=y ++CONFIG_SUNRPC_GSS=y ++# CONFIG_SUNRPC_REGISTER_V4 is not set ++CONFIG_RPCSEC_GSS_KRB5=y ++# CONFIG_RPCSEC_GSS_SPKM3 is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++ ++# ++# Partition Types ++# ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_ACORN_PARTITION is not set ++# CONFIG_OSF_PARTITION is not set ++# CONFIG_AMIGA_PARTITION is not set ++# CONFIG_ATARI_PARTITION is not set ++# CONFIG_MAC_PARTITION is not set ++CONFIG_MSDOS_PARTITION=y ++# CONFIG_BSD_DISKLABEL is not set ++# CONFIG_MINIX_SUBPARTITION is not set ++# CONFIG_SOLARIS_X86_PARTITION is not set ++# CONFIG_UNIXWARE_DISKLABEL is not set ++# CONFIG_LDM_PARTITION is not set ++# CONFIG_SGI_PARTITION is not set ++# CONFIG_ULTRIX_PARTITION is not set ++# CONFIG_SUN_PARTITION is not set ++# CONFIG_KARMA_PARTITION is not set ++# CONFIG_EFI_PARTITION is not set ++# CONFIG_SYSV68_PARTITION is not set ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++# CONFIG_NLS_CODEPAGE_850 is not set ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++# CONFIG_DLM is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_WARN_DEPRECATED=y ++CONFIG_ENABLE_MUST_CHECK=y ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++# CONFIG_UNUSED_SYMBOLS is not set ++CONFIG_DEBUG_FS=y ++# CONFIG_HEADERS_CHECK is not set ++CONFIG_DEBUG_KERNEL=y ++# CONFIG_DEBUG_SHIRQ is not set ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set ++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 ++CONFIG_SCHED_DEBUG=y ++CONFIG_SCHEDSTATS=y ++CONFIG_TIMER_STATS=y ++# CONFIG_DEBUG_OBJECTS is not set ++# CONFIG_SLUB_DEBUG_ON is not set ++# CONFIG_SLUB_STATS is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++CONFIG_DEBUG_MUTEXES=y ++# CONFIG_DEBUG_LOCK_ALLOC is not set ++# CONFIG_PROVE_LOCKING is not set ++# CONFIG_LOCK_STAT is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++CONFIG_STACKTRACE=y ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++# CONFIG_DEBUG_INFO is not set ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_WRITECOUNT is not set ++# CONFIG_DEBUG_MEMORY_INIT is not set ++# CONFIG_DEBUG_LIST is not set ++# CONFIG_DEBUG_SG is not set ++# CONFIG_DEBUG_NOTIFIERS is not set ++CONFIG_FRAME_POINTER=y ++# CONFIG_BOOT_PRINTK_DELAY is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++# CONFIG_RCU_CPU_STALL_DETECTOR is not set ++# CONFIG_BACKTRACE_SELF_TEST is not set ++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ++# CONFIG_FAULT_INJECTION is not set ++# CONFIG_LATENCYTOP is not set ++CONFIG_NOP_TRACER=y ++CONFIG_HAVE_FUNCTION_TRACER=y ++CONFIG_RING_BUFFER=y ++CONFIG_TRACING=y ++ ++# ++# Tracers ++# ++# CONFIG_FUNCTION_TRACER is not set ++# CONFIG_IRQSOFF_TRACER is not set ++# CONFIG_SCHED_TRACER is not set ++# CONFIG_CONTEXT_SWITCH_TRACER is not set ++# CONFIG_BOOT_TRACER is not set ++# CONFIG_TRACE_BRANCH_PROFILING is not set ++# CONFIG_STACK_TRACER is not set ++# CONFIG_FTRACE_STARTUP_TEST is not set ++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set ++# CONFIG_SAMPLES is not set ++CONFIG_HAVE_ARCH_KGDB=y ++# CONFIG_KGDB is not set ++CONFIG_DEBUG_USER=y ++CONFIG_DEBUG_ERRORS=y ++# CONFIG_DEBUG_STACK_USAGE is not set ++# CONFIG_DEBUG_LL is not set ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++# CONFIG_SECURITYFS is not set ++# CONFIG_SECURITY_FILE_CAPABILITIES is not set ++CONFIG_XOR_BLOCKS=m ++CONFIG_ASYNC_CORE=m ++CONFIG_ASYNC_MEMCPY=m ++CONFIG_ASYNC_XOR=m ++CONFIG_CRYPTO=y ++ ++# ++# Crypto core or helper ++# ++# CONFIG_CRYPTO_FIPS is not set ++CONFIG_CRYPTO_ALGAPI=y ++CONFIG_CRYPTO_ALGAPI2=y ++CONFIG_CRYPTO_AEAD2=y ++CONFIG_CRYPTO_BLKCIPHER=y ++CONFIG_CRYPTO_BLKCIPHER2=y ++CONFIG_CRYPTO_HASH=y ++CONFIG_CRYPTO_HASH2=y ++CONFIG_CRYPTO_RNG2=y ++CONFIG_CRYPTO_MANAGER=y ++CONFIG_CRYPTO_MANAGER2=y ++CONFIG_CRYPTO_GF128MUL=m ++CONFIG_CRYPTO_NULL=m ++CONFIG_CRYPTO_CRYPTD=m ++# CONFIG_CRYPTO_AUTHENC is not set ++CONFIG_CRYPTO_TEST=m ++ ++# ++# Authenticated Encryption with Associated Data ++# ++# CONFIG_CRYPTO_CCM is not set ++# CONFIG_CRYPTO_GCM is not set ++# CONFIG_CRYPTO_SEQIV is not set ++ ++# ++# Block modes ++# ++CONFIG_CRYPTO_CBC=y ++# CONFIG_CRYPTO_CTR is not set ++# CONFIG_CRYPTO_CTS is not set ++CONFIG_CRYPTO_ECB=y ++CONFIG_CRYPTO_LRW=m ++CONFIG_CRYPTO_PCBC=m ++# CONFIG_CRYPTO_XTS is not set ++ ++# ++# Hash modes ++# ++CONFIG_CRYPTO_HMAC=m ++CONFIG_CRYPTO_XCBC=m ++ ++# ++# Digest ++# ++CONFIG_CRYPTO_CRC32C=y ++CONFIG_CRYPTO_MD4=m ++CONFIG_CRYPTO_MD5=y ++CONFIG_CRYPTO_MICHAEL_MIC=y ++# CONFIG_CRYPTO_RMD128 is not set ++# CONFIG_CRYPTO_RMD160 is not set ++# CONFIG_CRYPTO_RMD256 is not set ++# CONFIG_CRYPTO_RMD320 is not set ++CONFIG_CRYPTO_SHA1=m ++CONFIG_CRYPTO_SHA256=m ++CONFIG_CRYPTO_SHA512=m ++CONFIG_CRYPTO_TGR192=m ++CONFIG_CRYPTO_WP512=m ++ ++# ++# Ciphers ++# ++CONFIG_CRYPTO_AES=y ++CONFIG_CRYPTO_ANUBIS=m ++CONFIG_CRYPTO_ARC4=y ++CONFIG_CRYPTO_BLOWFISH=m ++CONFIG_CRYPTO_CAMELLIA=m ++CONFIG_CRYPTO_CAST5=m ++CONFIG_CRYPTO_CAST6=m ++CONFIG_CRYPTO_DES=y ++CONFIG_CRYPTO_FCRYPT=m ++CONFIG_CRYPTO_KHAZAD=m ++# CONFIG_CRYPTO_SALSA20 is not set ++# CONFIG_CRYPTO_SEED is not set ++CONFIG_CRYPTO_SERPENT=m ++CONFIG_CRYPTO_TEA=m ++CONFIG_CRYPTO_TWOFISH=m ++CONFIG_CRYPTO_TWOFISH_COMMON=m ++ ++# ++# Compression ++# ++CONFIG_CRYPTO_DEFLATE=m ++# CONFIG_CRYPTO_LZO is not set ++ ++# ++# Random Number Generation ++# ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++CONFIG_CRYPTO_HW=y ++ ++# ++# Library routines ++# ++CONFIG_BITREVERSE=y ++CONFIG_GENERIC_FIND_LAST_BIT=y ++CONFIG_CRC_CCITT=y ++CONFIG_CRC16=m ++CONFIG_CRC_T10DIF=y ++CONFIG_CRC_ITU_T=y ++CONFIG_CRC32=y ++CONFIG_CRC7=y ++CONFIG_LIBCRC32C=y ++CONFIG_ZLIB_INFLATE=y ++CONFIG_ZLIB_DEFLATE=y ++CONFIG_LZO_COMPRESS=y ++CONFIG_LZO_DECOMPRESS=y ++CONFIG_PLIST=y ++CONFIG_HAS_IOMEM=y ++CONFIG_HAS_IOPORT=y ++CONFIG_HAS_DMA=y +diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c +index 0a1099e..3c664a9 100644 +--- a/arch/arm/mach-omap2/board-3430sdp.c ++++ b/arch/arm/mach-omap2/board-3430sdp.c +@@ -37,6 +37,7 @@ + #include + #include + #include ++#include + + #include + +@@ -242,6 +243,35 @@ static struct spi_board_info sdp3430_spi_board_info[] __initdata = { + }, + }; + ++ ++#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91 ++#define SDP2430_LCD_PANEL_ENABLE_GPIO 154 ++#if 0 ++#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 24 ++#define SDP3430_LCD_PANEL_ENABLE_GPIO 28 ++#else ++#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 ++#define SDP3430_LCD_PANEL_ENABLE_GPIO 5 ++#endif ++ ++#define PM_RECEIVER TWL4030_MODULE_PM_RECEIVER ++#define ENABLE_VAUX2_DEDICATED 0x09 ++#define ENABLE_VAUX2_DEV_GRP 0x20 ++#define ENABLE_VAUX3_DEDICATED 0x03 ++#define ENABLE_VAUX3_DEV_GRP 0x20 ++ ++#define ENABLE_VPLL2_DEDICATED 0x05 ++#define ENABLE_VPLL2_DEV_GRP 0xE0 ++#define TWL4030_VPLL2_DEV_GRP 0x33 ++#define TWL4030_VPLL2_DEDICATED 0x36 ++ ++#define t2_out(c, r, v) twl4030_i2c_write_u8(c, r, v) ++ ++static unsigned backlight_gpio; ++static unsigned enable_gpio; ++static int lcd_enabled; ++static int dvi_enabled; ++ + static struct platform_device sdp3430_lcd_device = { + .name = "sdp2430_lcd", + .id = -1, +@@ -257,9 +287,198 @@ static struct regulator_consumer_supply sdp3430_vdvi_supply = { + .dev = &sdp3430_lcd_device.dev, + }; + ++static void enable_vpll2(int enable) ++{ ++ u8 ded_val, grp_val; ++ ++ if (enable) { ++ ded_val = ENABLE_VPLL2_DEDICATED; ++ grp_val = ENABLE_VPLL2_DEV_GRP; ++ } else { ++ ded_val = 0; ++ grp_val = 0; ++ } ++ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ded_val, TWL4030_VPLL2_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ grp_val, TWL4030_VPLL2_DEV_GRP); ++} ++ ++static int sdp3430_dsi_power_up(void) ++{ ++ if (omap_rev() > OMAP3430_REV_ES1_0) ++ enable_vpll2(1); ++ return 0; ++} ++ ++static void sdp3430_dsi_power_down(void) ++{ ++ if (omap_rev() > OMAP3430_REV_ES1_0) ++ enable_vpll2(0); ++} ++ ++static void __init sdp3430_display_init(void) ++{ ++ int r; ++ ++ enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO; ++ backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO; ++ ++ r = gpio_request(enable_gpio, "LCD reset"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD reset GPIO\n"); ++ goto err0; ++ } ++ ++ r = gpio_request(backlight_gpio, "LCD Backlight"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD backlight GPIO\n"); ++ goto err1; ++ } ++ ++ gpio_direction_output(enable_gpio, 0); ++ gpio_direction_output(backlight_gpio, 0); ++ ++ return; ++err1: ++ gpio_free(enable_gpio); ++err0: ++ return; ++} ++ ++static int sdp3430_panel_enable_lcd(struct omap_display *display) ++{ ++ u8 ded_val, ded_reg; ++ u8 grp_val, grp_reg; ++ ++ if (dvi_enabled) { ++ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); ++ return -EINVAL; ++ } ++ ++ ded_reg = TWL4030_VAUX3_DEDICATED; ++ ded_val = ENABLE_VAUX3_DEDICATED; ++ grp_reg = TWL4030_VAUX3_DEV_GRP; ++ grp_val = ENABLE_VAUX3_DEV_GRP; ++ ++ gpio_direction_output(enable_gpio, 1); ++ gpio_direction_output(backlight_gpio, 1); ++ ++ if (0 != t2_out(PM_RECEIVER, ded_val, ded_reg)) ++ return -EIO; ++ if (0 != t2_out(PM_RECEIVER, grp_val, grp_reg)) ++ return -EIO; ++ ++ sdp3430_dsi_power_up(); ++ ++ lcd_enabled = 1; ++ ++ return 0; ++} ++ ++static void sdp3430_panel_disable_lcd(struct omap_display *display) ++{ ++ lcd_enabled = 0; ++ ++ sdp3430_dsi_power_down(); ++ ++ gpio_direction_output(enable_gpio, 0); ++ gpio_direction_output(backlight_gpio, 0); ++} ++ ++static struct omap_dss_display_config sdp3430_display_data = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "lcd", ++ .panel_name = "sharp-ls037v7dw01", ++ .u.dpi.data_lines = 16, ++ .panel_enable = sdp3430_panel_enable_lcd, ++ .panel_disable = sdp3430_panel_disable_lcd, ++}; ++ ++static int sdp3430_panel_enable_dvi(struct omap_display *display) ++{ ++ if (lcd_enabled) { ++ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); ++ return -EINVAL; ++ } ++ ++ sdp3430_dsi_power_up(); ++ ++ dvi_enabled = 1; ++ ++ return 0; ++} ++ ++static void sdp3430_panel_disable_dvi(struct omap_display *display) ++{ ++ sdp3430_dsi_power_down(); ++ ++ dvi_enabled = 0; ++} ++ ++ ++static struct omap_dss_display_config sdp3430_display_data_dvi = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "dvi", ++ .panel_name = "panel-generic", ++ .u.dpi.data_lines = 24, ++ .panel_enable = sdp3430_panel_enable_dvi, ++ .panel_disable = sdp3430_panel_disable_dvi, ++}; ++ ++static int sdp3430_panel_enable_tv(struct omap_display *display) ++{ ++#define ENABLE_VDAC_DEDICATED 0x03 ++#define ENABLE_VDAC_DEV_GRP 0x20 ++ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEDICATED, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); ++ ++ return 0; ++} ++ ++static void sdp3430_panel_disable_tv(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEV_GRP); ++} ++ ++static struct omap_dss_display_config sdp3430_display_data_tv = { ++ .type = OMAP_DISPLAY_TYPE_VENC, ++ .name = "tv", ++ .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, ++ .panel_enable = sdp3430_panel_enable_tv, ++ .panel_disable = sdp3430_panel_disable_tv, ++}; ++ ++static struct omap_dss_board_info sdp3430_dss_data = { ++ .dsi_power_up = sdp3430_dsi_power_up, ++ .dsi_power_down = sdp3430_dsi_power_down, ++ .num_displays = 3, ++ .displays = { ++ &sdp3430_display_data, ++ &sdp3430_display_data_dvi, ++ &sdp3430_display_data_tv, ++ } ++}; ++ ++static struct platform_device sdp3430_dss_device = { ++ .name = "omapdss", ++ .id = -1, ++ .dev = { ++ .platform_data = &sdp3430_dss_data, ++ }, ++}; ++ + static struct platform_device *sdp3430_devices[] __initdata = { + &sdp3430_smc91x_device, +- &sdp3430_lcd_device, ++ &sdp3430_dss_device, + }; + + static inline void __init sdp3430_init_smc91x(void) +@@ -306,13 +525,8 @@ static struct omap_uart_config sdp3430_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), + }; + +-static struct omap_lcd_config sdp3430_lcd_config __initdata = { +- .ctrl_name = "internal", +-}; +- + static struct omap_board_config_kernel sdp3430_config[] __initdata = { + { OMAP_TAG_UART, &sdp3430_uart_config }, +- { OMAP_TAG_LCD, &sdp3430_lcd_config }, + }; + + static int sdp3430_batt_table[] = { +@@ -681,6 +895,7 @@ static void __init omap_3430sdp_init(void) + omap_serial_init(); + usb_musb_init(); + usb_ehci_init(); ++ sdp3430_display_init(); + } + + static void __init omap_3430sdp_map_io(void) +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index 346351e..b67e7a5 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -30,6 +30,7 @@ + + #include + #include ++#include + + #include + #include +@@ -43,6 +44,7 @@ + #include + #include + #include ++#include + + #include "twl4030-generic-scripts.h" + #include "mmc-twl4030.h" +@@ -312,10 +314,6 @@ static void __init omap3_beagle_init_irq(void) + omap_gpio_init(); + } + +-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = { +- .ctrl_name = "internal", +-}; +- + static struct gpio_led gpio_leds[] = { + { + .name = "beagleboard::usr0", +@@ -369,13 +367,94 @@ static struct platform_device keys_gpio = { + }, + }; + ++/* DSS */ ++ ++static int beagle_enable_dvi(struct omap_display *display) ++{ ++ if (display->hw_config.panel_reset_gpio != -1) ++ gpio_direction_output(display->hw_config.panel_reset_gpio, 1); ++ ++ return 0; ++} ++ ++static void beagle_disable_dvi(struct omap_display *display) ++{ ++ if (display->hw_config.panel_reset_gpio != -1) ++ gpio_direction_output(display->hw_config.panel_reset_gpio, 0); ++} ++ ++static struct omap_dss_display_config beagle_display_data_dvi = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "dvi", ++ .panel_name = "panel-generic", ++ .u.dpi.data_lines = 24, ++ .panel_reset_gpio = 170, ++ .panel_enable = beagle_enable_dvi, ++ .panel_disable = beagle_disable_dvi, ++}; ++ ++ ++static int beagle_panel_enable_tv(struct omap_display *display) ++{ ++#define ENABLE_VDAC_DEDICATED 0x03 ++#define ENABLE_VDAC_DEV_GRP 0x20 ++ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEDICATED, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); ++ ++ return 0; ++} ++ ++static void beagle_panel_disable_tv(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEV_GRP); ++} ++ ++static struct omap_dss_display_config beagle_display_data_tv = { ++ .type = OMAP_DISPLAY_TYPE_VENC, ++ .name = "tv", ++ .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, ++ .panel_enable = beagle_panel_enable_tv, ++ .panel_disable = beagle_panel_disable_tv, ++}; ++ ++static struct omap_dss_board_info beagle_dss_data = { ++ .num_displays = 2, ++ .displays = { ++ &beagle_display_data_dvi, ++ &beagle_display_data_tv, ++ } ++}; ++ ++static struct platform_device beagle_dss_device = { ++ .name = "omapdss", ++ .id = -1, ++ .dev = { ++ .platform_data = &beagle_dss_data, ++ }, ++}; ++ ++static void __init beagle_display_init(void) ++{ ++ int r; ++ ++ r = gpio_request(beagle_display_data_dvi.panel_reset_gpio, "DVI reset"); ++ if (r < 0) ++ printk(KERN_ERR "Unable to get DVI reset GPIO\n"); ++} ++ + static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { + { OMAP_TAG_UART, &omap3_beagle_uart_config }, +- { OMAP_TAG_LCD, &omap3_beagle_lcd_config }, + }; + + static struct platform_device *omap3_beagle_devices[] __initdata = { +- &omap3_beagle_lcd_device, ++ &beagle_dss_device, + &leds_gpio, + &keys_gpio, + }; +@@ -428,13 +507,11 @@ static void __init omap3_beagle_init(void) + omap_serial_init(); + + omap_cfg_reg(J25_34XX_GPIO170); +- gpio_request(170, "DVI_nPD"); +- /* REVISIT leave DVI powered down until it's needed ... */ +- gpio_direction_output(170, true); + + usb_musb_init(); + usb_ehci_init(); + omap3beagle_flash_init(); ++ beagle_display_init(); + } + + static void __init omap3_beagle_map_io(void) +diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c +index 024d7c4..6f5a866 100644 +--- a/arch/arm/mach-omap2/board-omap3evm.c ++++ b/arch/arm/mach-omap2/board-omap3evm.c +@@ -36,6 +36,7 @@ + #include + #include + #include ++#include + + #include "sdram-micron-mt46h32m32lf-6.h" + #include "twl4030-generic-scripts.h" +@@ -216,13 +217,215 @@ static int __init omap3_evm_i2c_init(void) + return 0; + } + +-static struct platform_device omap3_evm_lcd_device = { +- .name = "omap3evm_lcd", +- .id = -1, ++#define LCD_PANEL_LR 2 ++#define LCD_PANEL_UD 3 ++#define LCD_PANEL_INI 152 ++#define LCD_PANEL_ENABLE_GPIO 153 ++#define LCD_PANEL_QVGA 154 ++#define LCD_PANEL_RESB 155 ++ ++#define ENABLE_VDAC_DEDICATED 0x03 ++#define ENABLE_VDAC_DEV_GRP 0x20 ++#define ENABLE_VPLL2_DEDICATED 0x05 ++#define ENABLE_VPLL2_DEV_GRP 0xE0 ++ ++#define TWL4030_GPIODATA_IN3 0x03 ++#define TWL4030_GPIODATA_DIR3 0x06 ++#define TWL4030_VPLL2_DEV_GRP 0x33 ++#define TWL4030_VPLL2_DEDICATED 0x36 ++ ++static int lcd_enabled; ++static int dvi_enabled; ++ ++static void __init omap3_evm_display_init(void) ++{ ++ int r; ++ r = gpio_request(LCD_PANEL_LR, "lcd_panel_lr"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_LR\n"); ++ return; ++ } ++ r = gpio_request(LCD_PANEL_UD, "lcd_panel_ud"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_UD\n"); ++ goto err_1; ++ } ++ ++ r = gpio_request(LCD_PANEL_INI, "lcd_panel_ini"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_INI\n"); ++ goto err_2; ++ } ++ r = gpio_request(LCD_PANEL_RESB, "lcd_panel_resb"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_RESB\n"); ++ goto err_3; ++ } ++ r = gpio_request(LCD_PANEL_QVGA, "lcd_panel_qvga"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_QVGA\n"); ++ goto err_4; ++ } ++ ++ gpio_direction_output(LCD_PANEL_LR, 0); ++ gpio_direction_output(LCD_PANEL_UD, 0); ++ gpio_direction_output(LCD_PANEL_INI, 0); ++ gpio_direction_output(LCD_PANEL_RESB, 0); ++ gpio_direction_output(LCD_PANEL_QVGA, 0); ++ ++#define TWL_LED_LEDEN 0x00 ++#define TWL_PWMA_PWMAON 0x00 ++#define TWL_PWMA_PWMAOFF 0x01 ++ ++ twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); ++ ++ gpio_direction_output(LCD_PANEL_RESB, 1); ++ gpio_direction_output(LCD_PANEL_INI, 1); ++ gpio_direction_output(LCD_PANEL_QVGA, 0); ++ gpio_direction_output(LCD_PANEL_LR, 1); ++ gpio_direction_output(LCD_PANEL_UD, 1); ++ ++ return; ++ ++err_4: ++ gpio_free(LCD_PANEL_RESB); ++err_3: ++ gpio_free(LCD_PANEL_INI); ++err_2: ++ gpio_free(LCD_PANEL_UD); ++err_1: ++ gpio_free(LCD_PANEL_LR); ++ ++} ++ ++static int omap3_evm_panel_enable_lcd(struct omap_display *display) ++{ ++ if (dvi_enabled) { ++ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); ++ return -EINVAL; ++ } ++ if (omap_rev() > OMAP3430_REV_ES1_0) { ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VPLL2_DEDICATED, TWL4030_VPLL2_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VPLL2_DEV_GRP, TWL4030_VPLL2_DEV_GRP); ++ } ++ gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0); ++ lcd_enabled = 1; ++ return 0; ++} ++ ++static void omap3_evm_panel_disable_lcd(struct omap_display *display) ++{ ++ if (omap_rev() > OMAP3430_REV_ES1_0) { ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, ++ TWL4030_VPLL2_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, ++ TWL4030_VPLL2_DEV_GRP); ++ } ++ gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1); ++ lcd_enabled = 0; ++} ++ ++static struct omap_dss_display_config omap3_evm_display_data = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "lcd", ++ .panel_name = "sharp-ls037v7dw01", ++ .u.dpi.data_lines = 18, ++ .panel_enable = omap3_evm_panel_enable_lcd, ++ .panel_disable = omap3_evm_panel_disable_lcd, + }; + +-static struct omap_lcd_config omap3_evm_lcd_config __initdata = { +- .ctrl_name = "internal", ++static int omap3_evm_panel_enable_tv(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEDICATED, TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); ++ return 0; ++} ++ ++static void omap3_evm_panel_disable_tv(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEV_GRP); ++} ++ ++static struct omap_dss_display_config omap3_evm_display_data_tv = { ++ .type = OMAP_DISPLAY_TYPE_VENC, ++ .name = "tv", ++ .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, ++ .panel_enable = omap3_evm_panel_enable_tv, ++ .panel_disable = omap3_evm_panel_disable_tv, ++}; ++ ++ ++static int omap3_evm_panel_enable_dvi(struct omap_display *display) ++{ ++ if (lcd_enabled) { ++ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); ++ return -EINVAL; ++ } ++ if (omap_rev() > OMAP3430_REV_ES1_0) { ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VPLL2_DEDICATED, TWL4030_VPLL2_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VPLL2_DEV_GRP, TWL4030_VPLL2_DEV_GRP); ++ } ++ ++ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, ++ TWL4030_GPIODATA_IN3); ++ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, ++ TWL4030_GPIODATA_DIR3); ++ dvi_enabled = 1; ++ ++ return 0; ++} ++ ++static void omap3_evm_panel_disable_dvi(struct omap_display *display) ++{ ++ if (omap_rev() > OMAP3430_REV_ES1_0) { ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, ++ TWL4030_VPLL2_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, ++ TWL4030_VPLL2_DEV_GRP); ++ } ++ ++ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x00, ++ TWL4030_GPIODATA_IN3); ++ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x00, ++ TWL4030_GPIODATA_DIR3); ++ dvi_enabled = 0; ++} ++ ++ ++static struct omap_dss_display_config omap3_evm_display_data_dvi = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "dvi", ++ .panel_name = "panel-generic", ++ .u.dpi.data_lines = 24, ++ .panel_enable = omap3_evm_panel_enable_dvi, ++ .panel_disable = omap3_evm_panel_disable_dvi, ++}; ++ ++static struct omap_dss_board_info omap3_evm_dss_data = { ++ .num_displays = 3, ++ .displays = { ++ &omap3_evm_display_data, ++ &omap3_evm_display_data_dvi, ++ &omap3_evm_display_data_tv, ++ } ++}; ++static struct platform_device omap3_evm_dss_device = { ++ .name = "omapdss", ++ .id = -1, ++ .dev = { ++ .platform_data = &omap3_evm_dss_data, ++ }, + }; + + static void ads7846_dev_init(void) +@@ -281,11 +484,10 @@ static void __init omap3_evm_init_irq(void) + + static struct omap_board_config_kernel omap3_evm_config[] __initdata = { + { OMAP_TAG_UART, &omap3_evm_uart_config }, +- { OMAP_TAG_LCD, &omap3_evm_lcd_config }, + }; + + static struct platform_device *omap3_evm_devices[] __initdata = { +- &omap3_evm_lcd_device, ++ &omap3_evm_dss_device, + &omap3evm_smc911x_device, + }; + +@@ -305,6 +507,7 @@ static void __init omap3_evm_init(void) + usb_ehci_init(); + omap3evm_flash_init(); + ads7846_dev_init(); ++ omap3_evm_display_init(); + } + + static void __init omap3_evm_map_io(void) +diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c +index 071f4b0..267bb6b 100644 +--- a/arch/arm/mach-omap2/board-overo.c ++++ b/arch/arm/mach-omap2/board-overo.c +@@ -41,6 +41,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -176,6 +177,9 @@ static void __init overo_ads7846_init(void) + static inline void __init overo_ads7846_init(void) { return; } + #endif + ++static int lcd_enabled; ++static int dvi_enabled; ++ + static struct mtd_partition overo_nand_partitions[] = { + { + .name = "xloader", +@@ -360,22 +364,101 @@ static void __init overo_init_irq(void) + omap_gpio_init(); + } + +-static struct platform_device overo_lcd_device = { +- .name = "overo_lcd", +- .id = -1, ++/* DSS */ ++ ++#define OVERO_GPIO_LCD_EN 144 ++ ++static void __init overo_display_init(void) ++{ ++ int r; ++ ++ r = gpio_request(OVERO_GPIO_LCD_EN, "display enable"); ++ if (r) ++ printk("fail1\n"); ++ r = gpio_direction_output(OVERO_GPIO_LCD_EN, 1); ++ if (r) ++ printk("fail2\n"); ++ gpio_export(OVERO_GPIO_LCD_EN, 0); ++} ++ ++static int overo_panel_enable_dvi(struct omap_display *display) ++{ ++ if (lcd_enabled) { ++ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); ++ return -EINVAL; ++ } ++ dvi_enabled = 1; ++ ++ gpio_set_value(OVERO_GPIO_LCD_EN, 1); ++ ++ return 0; ++} ++ ++static void overo_panel_disable_dvi(struct omap_display *display) ++{ ++ gpio_set_value(OVERO_GPIO_LCD_EN, 0); ++ ++ dvi_enabled = 0; ++} ++ ++static struct omap_dss_display_config overo_display_data_dvi = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "dvi", ++ .panel_name = "panel-generic", ++ .u.dpi.data_lines = 24, ++ .panel_enable = overo_panel_enable_dvi, ++ .panel_disable = overo_panel_disable_dvi, + }; + +-static struct omap_lcd_config overo_lcd_config __initdata = { +- .ctrl_name = "internal", ++static int overo_panel_enable_lcd(struct omap_display *display) ++{ ++ if (dvi_enabled) { ++ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); ++ return -EINVAL; ++ } ++ ++ gpio_set_value(OVERO_GPIO_LCD_EN, 1); ++ lcd_enabled = 1; ++ return 0; ++} ++ ++static void overo_panel_disable_lcd(struct omap_display *display) ++{ ++ gpio_set_value(OVERO_GPIO_LCD_EN, 0); ++ lcd_enabled = 0; ++} ++ ++static struct omap_dss_display_config overo_display_data_lcd = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "lcd43", ++ .panel_name = "samsung-lte430wq-f0c", ++ .u.dpi.data_lines = 24, ++ .panel_enable = overo_panel_enable_lcd, ++ .panel_disable = overo_panel_disable_lcd, ++ }; ++ ++static struct omap_dss_board_info overo_dss_data = { ++ .num_displays = 2, ++ .displays = { ++ &overo_display_data_dvi, ++ &overo_display_data_lcd, ++ } ++}; ++ ++static struct platform_device overo_dss_device = { ++ .name = "omapdss", ++ .id = -1, ++ .dev = { ++ .platform_data = &overo_dss_data, ++ }, + }; + + static struct omap_board_config_kernel overo_config[] __initdata = { + { OMAP_TAG_UART, &overo_uart_config }, +- { OMAP_TAG_LCD, &overo_lcd_config }, + }; + + static struct platform_device *overo_devices[] __initdata = { +- &overo_lcd_device, ++ &overo_dss_device, + }; + + static void __init overo_init(void) +@@ -390,6 +473,7 @@ static void __init overo_init(void) + overo_flash_init(); + overo_init_smsc911x(); + overo_ads7846_init(); ++ overo_display_init(); + + if ((gpio_request(OVERO_GPIO_W2W_NRESET, + "OVERO_GPIO_W2W_NRESET") == 0) && +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0008-DSS2-Add-function-to-display-object-to-get-the-back.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0008-DSS2-Add-function-to-display-object-to-get-the-back.patch new file mode 100644 index 000000000..4c8d432dd --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0008-DSS2-Add-function-to-display-object-to-get-the-back.patch @@ -0,0 +1,39 @@ +From 4741076cae4f4284e1fff9a03f35475b8455af54 Mon Sep 17 00:00:00 2001 +From: Imre Deak +Date: Wed, 1 Apr 2009 14:36:39 +0200 +Subject: [PATCH] DSS2: Add function to display object to get the backlight level + +This is needed by an upcoming patch that changes the backlight +initialization to use the backlight level set by the bootloader. + +Also add a field for the maximum backlight level. + +Signed-off-by: Imre Deak +--- + arch/arm/plat-omap/include/mach/display.h | 3 +++ + 1 files changed, 3 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h +index 6288353..6b702c7 100644 +--- a/arch/arm/plat-omap/include/mach/display.h ++++ b/arch/arm/plat-omap/include/mach/display.h +@@ -211,6 +211,8 @@ struct omap_dss_display_config { + int panel_reset_gpio; + int ctrl_reset_gpio; + ++ int max_backlight_level; ++ + const char *name; /* for debug */ + const char *ctrl_name; + const char *panel_name; +@@ -225,6 +227,7 @@ struct omap_dss_display_config { + void (*ctrl_disable)(struct omap_display *display); + int (*set_backlight)(struct omap_display *display, + int level); ++ int (*get_backlight)(struct omap_display *display); + }; + + struct device; +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0009-DSS2-Add-acx565akm-panel.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0009-DSS2-Add-acx565akm-panel.patch new file mode 100644 index 000000000..3f55f0446 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0009-DSS2-Add-acx565akm-panel.patch @@ -0,0 +1,778 @@ +From 66e16f86d3f4c5b34b37e965c65102b7192371de Mon Sep 17 00:00:00 2001 +From: Imre Deak +Date: Thu, 2 Apr 2009 11:47:13 +0300 +Subject: [PATCH] DSS2: Add acx565akm panel + +Signed-off-by: Imre Deak +--- + drivers/video/omap2/displays/Kconfig | 8 + + drivers/video/omap2/displays/Makefile | 2 + + drivers/video/omap2/displays/panel-acx565akm.c | 712 ++++++++++++++++++++++++ + drivers/video/omap2/displays/panel-acx565akm.h | 9 + + 4 files changed, 731 insertions(+), 0 deletions(-) + create mode 100644 drivers/video/omap2/displays/panel-acx565akm.c + create mode 100644 drivers/video/omap2/displays/panel-acx565akm.h + +diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig +index 356ceb1..3feecee 100644 +--- a/drivers/video/omap2/displays/Kconfig ++++ b/drivers/video/omap2/displays/Kconfig +@@ -28,4 +28,12 @@ config CTRL_BLIZZARD + tristate "Blizzard Controller" + help + Blizzard Controller (hack) ++ ++config PANEL_ACX565AKM ++ tristate "ACX565AKM LCD Panel" ++ depends on OMAP2_DSS_SDI ++ select BACKLIGHT_CLASS_DEVICE ++ help ++ LCD Panel used in RX51 ++ + endmenu +diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile +index 1b74b7e..9bafcb6 100644 +--- a/drivers/video/omap2/displays/Makefile ++++ b/drivers/video/omap2/displays/Makefile +@@ -4,3 +4,5 @@ obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o + + obj-$(CONFIG_CTRL_BLIZZARD) += ctrl-blizzard.o + obj-$(CONFIG_PANEL_N800) += panel-n800.o ++ ++obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o +diff --git a/drivers/video/omap2/displays/panel-acx565akm.c b/drivers/video/omap2/displays/panel-acx565akm.c +new file mode 100644 +index 0000000..2679d6c +--- /dev/null ++++ b/drivers/video/omap2/displays/panel-acx565akm.c +@@ -0,0 +1,712 @@ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "panel-acx565akm.h" ++ ++#define MIPID_CMD_READ_DISP_ID 0x04 ++#define MIPID_CMD_READ_RED 0x06 ++#define MIPID_CMD_READ_GREEN 0x07 ++#define MIPID_CMD_READ_BLUE 0x08 ++#define MIPID_CMD_READ_DISP_STATUS 0x09 ++#define MIPID_CMD_RDDSDR 0x0F ++#define MIPID_CMD_SLEEP_IN 0x10 ++#define MIPID_CMD_SLEEP_OUT 0x11 ++#define MIPID_CMD_DISP_OFF 0x28 ++#define MIPID_CMD_DISP_ON 0x29 ++#define MIPID_CMD_WRITE_DISP_BRIGHTNESS 0x51 ++#define MIPID_CMD_READ_DISP_BRIGHTNESS 0x52 ++#define MIPID_CMD_WRITE_CTRL_DISP 0x53 ++ ++#define CTRL_DISP_BRIGHTNESS_CTRL_ON (1 << 5) ++#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON (1 << 4) ++#define CTRL_DISP_BACKLIGHT_ON (1 << 2) ++#define CTRL_DISP_AUTO_BRIGHTNESS_ON (1 << 1) ++ ++#define MIPID_CMD_READ_CTRL_DISP 0x54 ++#define MIPID_CMD_WRITE_CABC 0x55 ++#define MIPID_CMD_READ_CABC 0x56 ++ ++#define MIPID_VER_LPH8923 3 ++#define MIPID_VER_LS041Y3 4 ++#define MIPID_VER_L4F00311 8 ++#define MIPID_VER_ACX565AKM 9 ++ ++struct acx565akm_device { ++ struct backlight_device *bl_dev; ++ int enabled; ++ int model; ++ int revision; ++ u8 display_id[3]; ++ int has_bc:1; ++ int has_cabc:1; ++ unsigned int saved_bklight_level; ++ unsigned long hw_guard_end; /* next value of jiffies ++ when we can issue the ++ next sleep in/out command */ ++ unsigned long hw_guard_wait; /* max guard time in jiffies */ ++ ++ struct spi_device *spi; ++ struct mutex mutex; ++ struct omap_panel panel; ++ struct omap_display *display; ++}; ++ ++static int acx565akm_bl_update_status(struct backlight_device *dev); ++ ++static void acx565akm_transfer(struct acx565akm_device *md, int cmd, ++ const u8 *wbuf, int wlen, u8 *rbuf, int rlen) ++{ ++ struct spi_message m; ++ struct spi_transfer *x, xfer[5]; ++ int r; ++ ++ BUG_ON(md->spi == NULL); ++ ++ spi_message_init(&m); ++ ++ memset(xfer, 0, sizeof(xfer)); ++ x = &xfer[0]; ++ ++ cmd &= 0xff; ++ x->tx_buf = &cmd; ++ x->bits_per_word = 9; ++ x->len = 2; ++ ++ if (rlen > 1 && wlen == 0) { ++ /* ++ * Between the command and the response data there is a ++ * dummy clock cycle. Add an extra bit after the command ++ * word to account for this. ++ */ ++ x->bits_per_word = 10; ++ cmd <<= 1; ++ } ++ spi_message_add_tail(x, &m); ++ ++ if (wlen) { ++ x++; ++ x->tx_buf = wbuf; ++ x->len = wlen; ++ x->bits_per_word = 9; ++ spi_message_add_tail(x, &m); ++ } ++ ++ if (rlen) { ++ x++; ++ x->rx_buf = rbuf; ++ x->len = rlen; ++ spi_message_add_tail(x, &m); ++ } ++ ++ r = spi_sync(md->spi, &m); ++ if (r < 0) ++ dev_dbg(&md->spi->dev, "spi_sync %d\n", r); ++} ++ ++static inline void acx565akm_cmd(struct acx565akm_device *md, int cmd) ++{ ++ acx565akm_transfer(md, cmd, NULL, 0, NULL, 0); ++} ++ ++static inline void acx565akm_write(struct acx565akm_device *md, ++ int reg, const u8 *buf, int len) ++{ ++ acx565akm_transfer(md, reg, buf, len, NULL, 0); ++} ++ ++static inline void acx565akm_read(struct acx565akm_device *md, ++ int reg, u8 *buf, int len) ++{ ++ acx565akm_transfer(md, reg, NULL, 0, buf, len); ++} ++ ++static void hw_guard_start(struct acx565akm_device *md, int guard_msec) ++{ ++ md->hw_guard_wait = msecs_to_jiffies(guard_msec); ++ md->hw_guard_end = jiffies + md->hw_guard_wait; ++} ++ ++static void hw_guard_wait(struct acx565akm_device *md) ++{ ++ unsigned long wait = md->hw_guard_end - jiffies; ++ ++ if ((long)wait > 0 && wait <= md->hw_guard_wait) { ++ set_current_state(TASK_UNINTERRUPTIBLE); ++ schedule_timeout(wait); ++ } ++} ++ ++static void set_sleep_mode(struct acx565akm_device *md, int on) ++{ ++ int cmd, sleep_time = 50; ++ ++ if (on) ++ cmd = MIPID_CMD_SLEEP_IN; ++ else ++ cmd = MIPID_CMD_SLEEP_OUT; ++ hw_guard_wait(md); ++ acx565akm_cmd(md, cmd); ++ hw_guard_start(md, 120); ++ /* ++ * When we enable the panel, it seems we _have_ to sleep ++ * 120 ms before sending the init string. When disabling the ++ * panel we'll sleep for the duration of 2 frames, so that the ++ * controller can still provide the PCLK,HS,VS signals. */ ++ if (!on) ++ sleep_time = 120; ++ msleep(sleep_time); ++} ++ ++static void set_display_state(struct acx565akm_device *md, int enabled) ++{ ++ int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF; ++ ++ acx565akm_cmd(md, cmd); ++} ++ ++static int panel_enabled(struct acx565akm_device *md) ++{ ++ u32 disp_status; ++ int enabled; ++ ++ acx565akm_read(md, MIPID_CMD_READ_DISP_STATUS, (u8 *)&disp_status, 4); ++ disp_status = __be32_to_cpu(disp_status); ++ enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10)); ++ dev_dbg(&md->spi->dev, ++ "LCD panel %senabled by bootloader (status 0x%04x)\n", ++ enabled ? "" : "not ", disp_status); ++ return enabled; ++} ++ ++static void enable_backlight_ctrl(struct acx565akm_device *md, int enable) ++{ ++ u16 ctrl; ++ ++ acx565akm_read(md, MIPID_CMD_READ_CTRL_DISP, (u8 *)&ctrl, 1); ++ if (enable) { ++ ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON | ++ CTRL_DISP_BACKLIGHT_ON; ++ } else { ++ ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON | ++ CTRL_DISP_BACKLIGHT_ON); ++ } ++ ++ ctrl |= 1 << 8; ++ acx565akm_write(md, MIPID_CMD_WRITE_CTRL_DISP, (u8 *)&ctrl, 2); ++} ++ ++static void set_cabc_mode(struct acx565akm_device *md, int mode) ++{ ++ u16 cabc_ctrl; ++ ++ cabc_ctrl = 0; ++ acx565akm_read(md, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1); ++ cabc_ctrl &= ~3; ++ cabc_ctrl |= (1 << 8) | (mode & 3); ++ acx565akm_write(md, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2); ++} ++ ++static int get_cabc_mode(struct acx565akm_device *md) ++{ ++ u8 cabc_ctrl; ++ ++ acx565akm_read(md, MIPID_CMD_READ_CABC, &cabc_ctrl, 1); ++ return cabc_ctrl & 3; ++} ++ ++static int panel_detect(struct acx565akm_device *md) ++{ ++ acx565akm_read(md, MIPID_CMD_READ_DISP_ID, md->display_id, 3); ++ dev_dbg(&md->spi->dev, "MIPI display ID: %02x%02x%02x\n", ++ md->display_id[0], md->display_id[1], md->display_id[2]); ++ ++ switch (md->display_id[0]) { ++ case 0x10: ++ md->model = MIPID_VER_ACX565AKM; ++ md->panel.name = "acx565akm"; ++ md->has_bc = 1; ++ md->has_cabc = 1; ++ break; ++ case 0x29: ++ md->model = MIPID_VER_L4F00311; ++ md->panel.name = "l4f00311"; ++ break; ++ case 0x45: ++ md->model = MIPID_VER_LPH8923; ++ md->panel.name = "lph8923"; ++ break; ++ case 0x83: ++ md->model = MIPID_VER_LS041Y3; ++ md->panel.name = "ls041y3"; ++ break; ++ default: ++ md->panel.name = "unknown"; ++ dev_err(&md->spi->dev, "invalid display ID\n"); ++ return -ENODEV; ++ } ++ ++ md->revision = md->display_id[1]; ++ ++ pr_info("omapfb: %s rev %02x LCD detected\n", ++ md->panel.name, md->revision); ++ ++ return 0; ++} ++ ++static int acx565akm_panel_enable(struct omap_display *display) ++{ ++ struct acx565akm_device *md = ++ (struct acx565akm_device *)display->panel->priv; ++ ++ dev_dbg(&md->spi->dev, "%s\n", __func__); ++ ++ mutex_lock(&md->mutex); ++ ++ if (display->hw_config.panel_enable) ++ display->hw_config.panel_enable(display); ++ ++ md->enabled = panel_enabled(md); ++ ++ if (md->enabled) { ++ dev_dbg(&md->spi->dev, "panel already enabled\n"); ++ mutex_unlock(&md->mutex); ++ return 0; ++ } ++ ++ set_sleep_mode(md, 0); ++ md->enabled = 1; ++ set_display_state(md, 1); ++ ++ mutex_unlock(&md->mutex); ++ ++ return acx565akm_bl_update_status(md->bl_dev); ++} ++ ++static void acx565akm_panel_disable(struct omap_display *display) ++{ ++ struct acx565akm_device *md = ++ (struct acx565akm_device *)display->panel->priv; ++ ++ dev_dbg(&md->spi->dev, "%s\n", __func__); ++ ++ mutex_lock(&md->mutex); ++ ++ if (!md->enabled) { ++ mutex_unlock(&md->mutex); ++ return; ++ } ++ set_display_state(md, 0); ++ set_sleep_mode(md, 1); ++ md->enabled = 0; ++ ++ if (display->hw_config.panel_disable) ++ display->hw_config.panel_disable(display); ++ ++ mutex_unlock(&md->mutex); ++} ++ ++#if 0 ++static void acx565akm_set_mode(struct omap_display *display, ++ int x_res, int y_res, int bpp) ++{ ++ struct acx565akm_device *md = ++ (struct acx565akm_device *)display->panel->priv; ++ u16 par; ++ ++ switch (bpp) { ++ case 16: ++ par = 0x150; ++ break; ++ case 18: ++ par = 0x160; ++ break; ++ case 24: ++ par = 0x170; ++ break; ++ } ++ ++ acx565akm_write(md, 0x3a, (u8 *)&par, 2); ++} ++#endif ++ ++static int acx565akm_panel_suspend(struct omap_display *display) ++{ ++ acx565akm_panel_disable(display); ++ return 0; ++} ++ ++static int acx565akm_panel_resume(struct omap_display *display) ++{ ++ return acx565akm_panel_enable(display); ++} ++ ++static void acx565akm_set_brightness(struct acx565akm_device *md, int level) ++{ ++ int bv; ++ ++ bv = level | (1 << 8); ++ acx565akm_write(md, MIPID_CMD_WRITE_DISP_BRIGHTNESS, (u8 *)&bv, 2); ++ ++ if (level) ++ enable_backlight_ctrl(md, 1); ++ else ++ enable_backlight_ctrl(md, 0); ++} ++ ++static int acx565akm_get_actual_brightness(struct acx565akm_device *md) ++{ ++ u8 bv; ++ ++ acx565akm_read(md, MIPID_CMD_READ_DISP_BRIGHTNESS, &bv, 1); ++ ++ return bv; ++} ++ ++static int acx565akm_bl_update_status(struct backlight_device *dev) ++{ ++ struct acx565akm_device *md = dev_get_drvdata(&dev->dev); ++ struct omap_display *display = md->display; ++ int r; ++ int level; ++ ++ dev_dbg(&md->spi->dev, "%s\n", __func__); ++ ++ if (display->hw_config.set_backlight == NULL) ++ return -ENODEV; ++ ++ mutex_lock(&md->mutex); ++ ++ if (dev->props.fb_blank == FB_BLANK_UNBLANK && ++ dev->props.power == FB_BLANK_UNBLANK) ++ level = dev->props.brightness; ++ else ++ level = 0; ++ ++ r = 0; ++ if (md->has_bc) ++ acx565akm_set_brightness(md, level); ++ else ++ if (display->hw_config.set_backlight != NULL) ++ r = display->hw_config.set_backlight(display, level); ++ else ++ r = -ENODEV; ++ ++ mutex_unlock(&md->mutex); ++ ++ return r; ++} ++ ++static int acx565akm_bl_get_intensity(struct backlight_device *dev) ++{ ++ struct acx565akm_device *md = dev_get_drvdata(&dev->dev); ++ struct omap_display *display = md->display; ++ ++ dev_dbg(&dev->dev, "%s\n", __func__); ++ ++ if (md->has_bc && display->hw_config.set_backlight == NULL) ++ return -ENODEV; ++ ++ if (dev->props.fb_blank == FB_BLANK_UNBLANK && ++ dev->props.power == FB_BLANK_UNBLANK) { ++ if (md->has_bc) ++ return acx565akm_get_actual_brightness(md); ++ else ++ return dev->props.brightness; ++ } ++ ++ return 0; ++} ++ ++static struct backlight_ops acx565akm_bl_ops = { ++ .get_brightness = acx565akm_bl_get_intensity, ++ .update_status = acx565akm_bl_update_status, ++}; ++ ++static const char *cabc_modes[] = { ++ "off", /* used also always when CABC is not supported */ ++ "ui", ++ "still-image", ++ "moving-image", ++}; ++ ++static ssize_t show_cabc_mode(struct device *dev, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ struct acx565akm_device *md = dev_get_drvdata(dev); ++ const char *mode_str; ++ int mode; ++ int len; ++ ++ if (!md->has_cabc) ++ mode = 0; ++ else ++ mode = get_cabc_mode(md); ++ mode_str = "unknown"; ++ if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes)) ++ mode_str = cabc_modes[mode]; ++ len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str); ++ ++ return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1; ++} ++ ++static ssize_t store_cabc_mode(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct acx565akm_device *md = dev_get_drvdata(dev); ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) { ++ const char *mode_str = cabc_modes[i]; ++ int cmp_len = strlen(mode_str); ++ ++ if (count > 0 && buf[count - 1] == '\n') ++ count--; ++ if (count != cmp_len) ++ continue; ++ ++ if (strncmp(buf, mode_str, cmp_len) == 0) ++ break; ++ } ++ ++ if (i == ARRAY_SIZE(cabc_modes)) ++ return -EINVAL; ++ ++ if (!md->has_cabc && i != 0) ++ return -EINVAL; ++ ++ mutex_lock(&md->mutex); ++ set_cabc_mode(md, i); ++ mutex_unlock(&md->mutex); ++ ++ return count; ++} ++ ++static ssize_t show_cabc_available_modes(struct device *dev, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ struct acx565akm_device *md = dev_get_drvdata(dev); ++ int len; ++ int i; ++ ++ if (!md->has_cabc) ++ return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]); ++ ++ for (i = 0, len = 0; ++ len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++) ++ len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s", ++ i ? " " : "", cabc_modes[i], ++ i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : ""); ++ ++ return len < PAGE_SIZE ? len : PAGE_SIZE - 1; ++} ++ ++static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR, ++ show_cabc_mode, store_cabc_mode); ++static DEVICE_ATTR(cabc_available_modes, S_IRUGO, ++ show_cabc_available_modes, NULL); ++ ++static struct attribute *bldev_attrs[] = { ++ &dev_attr_cabc_mode.attr, ++ &dev_attr_cabc_available_modes.attr, ++ NULL, ++}; ++ ++static struct attribute_group bldev_attr_group = { ++ .attrs = bldev_attrs, ++}; ++ ++static int acx565akm_panel_init(struct omap_display *display) ++{ ++ struct omap_panel *panel = display->panel; ++ struct acx565akm_panel_data *panel_data = display->hw_config.panel_data; ++ struct acx565akm_device *md = (struct acx565akm_device *)panel->priv; ++ ++ struct backlight_device *bldev; ++ int brightness; ++ int max_brightness; ++ int r; ++ ++ dev_dbg(&md->spi->dev, "%s\n", __func__); ++ ++ if (!panel_data) { ++ dev_err(&md->spi->dev, "no panel data\n"); ++ return -ENODEV; ++ } ++ ++ mutex_init(&md->mutex); ++ md->display = display; ++ ++ if (display->hw_config.panel_enable) ++ display->hw_config.panel_enable(display); ++ ++ md->enabled = panel_enabled(md); ++ ++ r = panel_detect(md); ++ if (r) { ++ if (!md->enabled && display->hw_config.panel_disable) ++ display->hw_config.panel_disable(display); ++ mutex_unlock(&md->mutex); ++ return r; ++ } ++ ++ if (!panel_data->bc_connected) { ++ md->has_bc = 0; ++ md->has_cabc = 0; ++ } ++ ++#if 0 ++ acx565akm_set_mode(display, panel->timings.x_res, panel->timings.y_res, ++ panel->bpp); ++#endif ++ ++ if (!md->enabled) ++ display->hw_config.panel_disable(display); ++ ++ bldev = backlight_device_register("acx565akm", &md->spi->dev, ++ md, &acx565akm_bl_ops); ++ md->bl_dev = bldev; ++ ++ if (md->has_cabc) { ++ r = sysfs_create_group(&bldev->dev.kobj, &bldev_attr_group); ++ if (r) { ++ dev_err(&bldev->dev, "failed to create sysfs files\n"); ++ backlight_device_unregister(bldev); ++ return r; ++ } ++ } ++ ++ bldev->props.fb_blank = FB_BLANK_UNBLANK; ++ bldev->props.power = FB_BLANK_UNBLANK; ++ ++ if (md->has_bc) ++ max_brightness = 255; ++ else ++ max_brightness = display->hw_config.max_backlight_level; ++ ++ if (md->has_bc) ++ brightness = acx565akm_get_actual_brightness(md); ++ else { ++ if (display->hw_config.get_backlight != NULL) ++ brightness = display->hw_config.get_backlight(display); ++ else ++ brightness = 0; ++ } ++ ++ bldev->props.max_brightness = max_brightness; ++ bldev->props.brightness = brightness; ++ acx565akm_bl_update_status(bldev); ++ ++ return 0; ++} ++ ++static struct omap_panel acx565akm_panel = { ++ .name = "panel-acx565akm", ++ .init = acx565akm_panel_init, ++ .suspend = acx565akm_panel_suspend, ++ .resume = acx565akm_panel_resume, ++ .enable = acx565akm_panel_enable, ++ .disable = acx565akm_panel_disable, ++ ++ .timings = { ++ .x_res = 800, ++ .y_res = 480, ++ ++ .pixel_clock = 24000, ++ ++ .hsw = 4, ++ .hfp = 16, ++ .hbp = 12, ++ ++ .vsw = 3, ++ .vfp = 3, ++ .vbp = 3, ++ }, ++ ++ .config = OMAP_DSS_LCD_TFT, ++ ++ .recommended_bpp = 16, ++ ++ /* ++ * supported modes: 12bpp(444), 16bpp(565), 18bpp(666), 24bpp(888) ++ * resolutions. ++ */ ++}; ++ ++static int acx565akm_spi_probe(struct spi_device *spi) ++{ ++ struct acx565akm_device *md; ++ ++ dev_dbg(&md->spi->dev, "%s\n", __func__); ++ ++ md = kzalloc(sizeof(*md), GFP_KERNEL); ++ if (md == NULL) { ++ dev_err(&spi->dev, "out of memory\n"); ++ return -ENOMEM; ++ } ++ ++ spi->mode = SPI_MODE_3; ++ md->spi = spi; ++ dev_set_drvdata(&spi->dev, md); ++ md->panel = acx565akm_panel; ++ acx565akm_panel.priv = md; ++ ++ omap_dss_register_panel(&acx565akm_panel); ++ ++ return 0; ++} ++ ++static int acx565akm_spi_remove(struct spi_device *spi) ++{ ++ struct acx565akm_device *md = dev_get_drvdata(&spi->dev); ++ ++ dev_dbg(&md->spi->dev, "%s\n", __func__); ++ ++ sysfs_remove_group(&md->bl_dev->dev.kobj, &bldev_attr_group); ++ backlight_device_unregister(md->bl_dev); ++ omap_dss_unregister_panel(&acx565akm_panel); ++ ++ kfree(md); ++ ++ return 0; ++} ++ ++static struct spi_driver acx565akm_spi_driver = { ++ .driver = { ++ .name = "acx565akm", ++ .bus = &spi_bus_type, ++ .owner = THIS_MODULE, ++ }, ++ .probe = acx565akm_spi_probe, ++ .remove = __devexit_p(acx565akm_spi_remove), ++}; ++ ++static int __init acx565akm_init(void) ++{ ++ return spi_register_driver(&acx565akm_spi_driver); ++} ++ ++static void __exit acx565akm_exit(void) ++{ ++ spi_unregister_driver(&acx565akm_spi_driver); ++} ++ ++module_init(acx565akm_init); ++module_exit(acx565akm_exit); ++ ++MODULE_AUTHOR("Tomi Valkeinen "); ++MODULE_DESCRIPTION("acx565akm LCD Driver"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/video/omap2/displays/panel-acx565akm.h b/drivers/video/omap2/displays/panel-acx565akm.h +new file mode 100644 +index 0000000..6d3727b +--- /dev/null ++++ b/drivers/video/omap2/displays/panel-acx565akm.h +@@ -0,0 +1,9 @@ ++#ifndef __DRIVERS_VIDEO_OMAP2_DISPLAYS_PANEL_ACX565AKM_H ++#define __DRIVERS_VIDEO_OMAP2_DISPLAYS_PANEL_ACX565AKM_H ++ ++struct acx565akm_panel_data { ++ unsigned bc_connected:1; ++}; ++ ++#endif ++ +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0010-DSS2-Small-VRFB-context-allocation-bug-fixed.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0010-DSS2-Small-VRFB-context-allocation-bug-fixed.patch new file mode 100644 index 000000000..c7efc58a0 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0010-DSS2-Small-VRFB-context-allocation-bug-fixed.patch @@ -0,0 +1,28 @@ +From 370510e24ddbf539392ebb6a1e43280965fcb19b Mon Sep 17 00:00:00 2001 +From: Vaibhav Hiremath +Date: Tue, 31 Mar 2009 18:47:32 +0530 +Subject: [PATCH] DSS2: Small VRFB context allocation bug fixed + +This is minor bug while requesting and mapping memory for +VRFB space. + +Signed-off-by: Vaibhav Hiremath +--- + drivers/video/omap2/omapfb/omapfb-main.c | 1 + + 1 files changed, 1 insertions(+), 0 deletions(-) + +diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c +index 852abe5..44febef 100644 +--- a/drivers/video/omap2/omapfb/omapfb-main.c ++++ b/drivers/video/omap2/omapfb/omapfb-main.c +@@ -1193,6 +1193,7 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size, + + if(!va) { + printk(KERN_ERR "vrfb: ioremap failed\n"); ++ omap_vrfb_release_ctx(&rg->vrfb); + return -ENOMEM; + } + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0011-DSS2-Allocated-memory-for-Color-Look-up-table.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0011-DSS2-Allocated-memory-for-Color-Look-up-table.patch new file mode 100644 index 000000000..1a82ed2a2 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0011-DSS2-Allocated-memory-for-Color-Look-up-table.patch @@ -0,0 +1,37 @@ +From 370d1f93a32e8fcaeac5c16574417e354af21d08 Mon Sep 17 00:00:00 2001 +From: Vaibhav Hiremath +Date: Tue, 31 Mar 2009 18:38:31 +0530 +Subject: [PATCH] DSS2: Allocated memory for Color Look-up-table + +We were not allocating memory for CMAP buffer and due to that +G_CMAP was failing, since it does check for size of CMAP buffer. + +Called "fb_alloc_cmap" for llocating memory for CMAP. + +We are currently not supporting 1,2,4,8 bpp, so meaning less +for us as of now. But for completeness this is required. + +Signed-off-by: Vaibhav Hiremath +--- + drivers/video/omap2/omapfb/omapfb-main.c | 5 +++++ + 1 files changed, 5 insertions(+), 0 deletions(-) + +diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c +index 44febef..afe40a9 100644 +--- a/drivers/video/omap2/omapfb/omapfb-main.c ++++ b/drivers/video/omap2/omapfb/omapfb-main.c +@@ -1525,6 +1525,11 @@ int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi) + goto err; + + set_fb_fix(fbi); ++ ++ r = fb_alloc_cmap(&fbi->cmap, 256, 0); ++ if (r) ++ dev_err(fbdev->dev, "unable to allocate color map memory\n"); ++ + err: + return r; + } +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0012-DSS2-Fix-DMA-rotation.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0012-DSS2-Fix-DMA-rotation.patch new file mode 100644 index 000000000..22add6efd --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0012-DSS2-Fix-DMA-rotation.patch @@ -0,0 +1,65 @@ +From 9c93bcab724b5935d745604773ed43825efefd87 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Thu, 2 Apr 2009 13:47:11 +0300 +Subject: [PATCH] DSS2: Fix DMA rotation + +u16 was not a good type for offsets. First, they need to be signed, +and second, 16 bits is not enough. +--- + drivers/video/omap2/dss/dispc.c | 12 ++++++------ + 1 files changed, 6 insertions(+), 6 deletions(-) + +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +index ffb5648..6cea545 100644 +--- a/drivers/video/omap2/dss/dispc.c ++++ b/drivers/video/omap2/dss/dispc.c +@@ -778,7 +778,7 @@ static void _dispc_set_vid_size(enum omap_plane plane, int width, int height) + dispc_write_reg(vsi_reg[plane-1], val); + } + +-static void _dispc_set_pix_inc(enum omap_plane plane, u16 inc) ++static void _dispc_set_pix_inc(enum omap_plane plane, s32 inc) + { + const struct dispc_reg ri_reg[] = { DISPC_GFX_PIXEL_INC, + DISPC_VID_PIXEL_INC(0), +@@ -787,7 +787,7 @@ static void _dispc_set_pix_inc(enum omap_plane plane, u16 inc) + dispc_write_reg(ri_reg[plane], inc); + } + +-static void _dispc_set_row_inc(enum omap_plane plane, u16 inc) ++static void _dispc_set_row_inc(enum omap_plane plane, s32 inc) + { + const struct dispc_reg ri_reg[] = { DISPC_GFX_ROW_INC, + DISPC_VID_ROW_INC(0), +@@ -1123,7 +1123,7 @@ static void _dispc_set_rotation_attrs(enum omap_plane plane, u8 rotation, + } + } + +-static int pixinc(int pixels, u8 ps) ++static s32 pixinc(int pixels, u8 ps) + { + if (pixels == 1) + return 1; +@@ -1140,7 +1140,7 @@ static void calc_rotation_offset(u8 rotation, bool mirror, + u16 width, u16 height, + enum omap_color_mode color_mode, bool fieldmode, + unsigned *offset0, unsigned *offset1, +- u16 *row_inc, u16 *pix_inc) ++ s32 *row_inc, s32 *pix_inc) + { + u8 ps; + u16 fbw, fbh; +@@ -1298,8 +1298,8 @@ static int _dispc_setup_plane(enum omap_plane plane, + bool fieldmode = 0; + int cconv = 0; + unsigned offset0, offset1; +- u16 row_inc; +- u16 pix_inc; ++ s32 row_inc; ++ s32 pix_inc; + + if (plane == OMAP_DSS_GFX) { + if (width != out_width || height != out_height) +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0013-DSS2-Verify-that-overlay-paddr-0.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0013-DSS2-Verify-that-overlay-paddr-0.patch new file mode 100644 index 000000000..76b8c7363 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0013-DSS2-Verify-that-overlay-paddr-0.patch @@ -0,0 +1,41 @@ +From 360a55ddd309e3a45b227a4a905ae7120dd16169 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Thu, 2 Apr 2009 14:21:12 +0300 +Subject: [PATCH] DSS2: Verify that overlay paddr != 0 + +--- + drivers/video/omap2/dss/dispc.c | 3 +++ + drivers/video/omap2/dss/overlay.c | 3 +++ + 2 files changed, 6 insertions(+), 0 deletions(-) + +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +index 6cea545..2480a03 100644 +--- a/drivers/video/omap2/dss/dispc.c ++++ b/drivers/video/omap2/dss/dispc.c +@@ -1301,6 +1301,9 @@ static int _dispc_setup_plane(enum omap_plane plane, + s32 row_inc; + s32 pix_inc; + ++ if (paddr == 0) ++ return -EINVAL; ++ + if (plane == OMAP_DSS_GFX) { + if (width != out_width || height != out_height) + return -EINVAL; +diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c +index 968edbe..9209acf 100644 +--- a/drivers/video/omap2/dss/overlay.c ++++ b/drivers/video/omap2/dss/overlay.c +@@ -331,6 +331,9 @@ static int dss_ovl_set_overlay_info(struct omap_overlay *ovl, + int r; + struct omap_overlay_info old_info; + ++ if (info->paddr == 0) ++ return -EINVAL; ++ + old_info = ovl->info; + ovl->info = *info; + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0014-DSS2-Add-function-to-get-DSS-logic-clock-rate.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0014-DSS2-Add-function-to-get-DSS-logic-clock-rate.patch new file mode 100644 index 000000000..3b3fd77a9 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0014-DSS2-Add-function-to-get-DSS-logic-clock-rate.patch @@ -0,0 +1,51 @@ +From 832b763db235da8e62f7b6ab02bcb8ad6bcb7a01 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Thu, 2 Apr 2009 16:48:41 +0300 +Subject: [PATCH] DSS2: Add function to get DSS logic clock rate + +--- + drivers/video/omap2/dss/dispc.c | 15 +++++++++++++++ + drivers/video/omap2/dss/dss.h | 1 + + 2 files changed, 16 insertions(+), 0 deletions(-) + +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +index 2480a03..1bc23f7 100644 +--- a/drivers/video/omap2/dss/dispc.c ++++ b/drivers/video/omap2/dss/dispc.c +@@ -1850,6 +1850,21 @@ unsigned long dispc_fclk_rate(void) + return r; + } + ++unsigned long dispc_lclk_rate(void) ++{ ++ int lcd; ++ unsigned long r; ++ u32 l; ++ ++ l = dispc_read_reg(DISPC_DIVISOR); ++ ++ lcd = FLD_GET(l, 23, 16); ++ ++ r = dispc_fclk_rate(); ++ ++ return r / lcd; ++} ++ + unsigned long dispc_pclk_rate(void) + { + int lcd, pcd; +diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h +index bac5ece..0be42b6 100644 +--- a/drivers/video/omap2/dss/dss.h ++++ b/drivers/video/omap2/dss/dss.h +@@ -294,6 +294,7 @@ bool dispc_trans_key_enabled(enum omap_channel ch); + + void dispc_set_lcd_timings(struct omap_video_timings *timings); + unsigned long dispc_fclk_rate(void); ++unsigned long dispc_lclk_rate(void); + unsigned long dispc_pclk_rate(void); + void dispc_set_pol_freq(struct omap_panel *panel); + void find_lck_pck_divs(bool is_tft, unsigned long req_pck, unsigned long fck, +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0015-DSS2-DSI-calculate-VP_CLK_RATIO-properly.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0015-DSS2-DSI-calculate-VP_CLK_RATIO-properly.patch new file mode 100644 index 000000000..d6b0cbbb4 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0015-DSS2-DSI-calculate-VP_CLK_RATIO-properly.patch @@ -0,0 +1,68 @@ +From a5c235a6f0094494ae1fc1a1ba4728e0d33dfd3b Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Thu, 2 Apr 2009 16:49:27 +0300 +Subject: [PATCH] DSS2: DSI: calculate VP_CLK_RATIO properly + +--- + drivers/video/omap2/dss/dsi.c | 17 +++++++++++------ + 1 files changed, 11 insertions(+), 6 deletions(-) + +diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c +index 4442931..aecb89d 100644 +--- a/drivers/video/omap2/dss/dsi.c ++++ b/drivers/video/omap2/dss/dsi.c +@@ -1104,7 +1104,10 @@ int dsi_pll_init(bool enable_hsclk, bool enable_hsdiv) + enable_clocks(1); + dsi_enable_pll_clock(1); + +- /* configure dispc fck and pixel clock to something sane */ ++ /* XXX this should be calculated depending on the screen size, ++ * required framerate and DSI speed. ++ * For now 48MHz is enough for 864x480@60 with 360Mbps/lane ++ * with two lanes */ + r = dispc_calc_clock_div(1, 48 * 1000 * 1000, &cinfo); + if (r) + goto err0; +@@ -1119,7 +1122,7 @@ int dsi_pll_init(bool enable_hsclk, bool enable_hsdiv) + if (r) + goto err0; + +- /* PLL does not come out of reset without this... */ ++ /* XXX PLL does not come out of reset without this... */ + dispc_pck_free_enable(1); + + if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) { +@@ -1128,8 +1131,8 @@ int dsi_pll_init(bool enable_hsclk, bool enable_hsdiv) + goto err1; + } + +- /* ... but if left on, we get problems when planes do not +- * fill the whole display. No idea about this XXX */ ++ /* XXX ... but if left on, we get problems when planes do not ++ * fill the whole display. No idea about this */ + dispc_pck_free_enable(0); + + if (enable_hsclk && enable_hsdiv) +@@ -2214,6 +2217,7 @@ static int dsi_proto_config(struct omap_display *display) + { + u32 r; + int buswidth = 0; ++ int div; + + dsi_config_tx_fifo(DSI_FIFO_SIZE_128, + DSI_FIFO_SIZE_0, +@@ -2254,8 +2258,9 @@ static int dsi_proto_config(struct omap_display *display) + r = FLD_MOD(r, 1, 1, 1); /* CS_RX_EN */ + r = FLD_MOD(r, 1, 2, 2); /* ECC_RX_EN */ + r = FLD_MOD(r, 1, 3, 3); /* TX_FIFO_ARBITRATION */ +- /* XXX what should the ratio be */ +- r = FLD_MOD(r, 0, 4, 4); /* VP_CLK_RATIO, VP_PCLK = VP_CLK/2 */ ++ ++ div = dispc_lclk_rate() / dispc_pclk_rate(); ++ r = FLD_MOD(r, div == 2 ? 0 : 1, 4, 4); /* VP_CLK_RATIO */ + r = FLD_MOD(r, buswidth, 7, 6); /* VP_DATA_BUS_WIDTH */ + r = FLD_MOD(r, 0, 8, 8); /* VP_CLK_POL */ + r = FLD_MOD(r, 2, 13, 12); /* LINE_BUFFER, 2 lines */ +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0016-DSS2-DSI-improve-packet-len-calculation.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0016-DSS2-DSI-improve-packet-len-calculation.patch new file mode 100644 index 000000000..bca449f16 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0016-DSS2-DSI-improve-packet-len-calculation.patch @@ -0,0 +1,58 @@ +From 6b2c9d84c7accdfe1067fcdc8a00e50674aab4bb Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Thu, 2 Apr 2009 17:42:26 +0300 +Subject: [PATCH] DSS2: DSI: improve packet len calculation + +--- + drivers/video/omap2/dss/dsi.c | 21 ++++++++++++++++----- + 1 files changed, 16 insertions(+), 5 deletions(-) + +diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c +index aecb89d..66ac6ea 100644 +--- a/drivers/video/omap2/dss/dsi.c ++++ b/drivers/video/omap2/dss/dsi.c +@@ -2624,17 +2624,28 @@ static void dsi_update_screen_dispc(struct omap_display *display, + u16 x, u16 y, u16 w, u16 h) + { + int bytespp = 3; ++ int len; + int total_len; +- int line_packet_len; ++ int packet_payload; ++ int packet_len; + u32 l; + + if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL) + DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n", + x, y, w, h); + +- /* TODO: one packet could be longer, I think? Max is the line buffer */ +- line_packet_len = w * bytespp + 1; /* 1 byte for DCS cmd */ +- total_len = line_packet_len * h; ++ len = w * h * bytespp; ++ ++ /* XXX: one packet could be longer, I think? Line buffer is ++ * 1024 x 24bits, but we have to put DCS cmd there also. ++ * 1023 * 3 should work, but causes strange color effects. */ ++ packet_payload = min(w, (u16)1020) * bytespp; ++ ++ packet_len = packet_payload + 1; /* 1 byte for DCS cmd */ ++ total_len = (len / packet_payload) * packet_len; ++ ++ if (len % packet_payload) ++ total_len += (len % packet_payload) + 1; + + display->ctrl->setup_update(display, x, y, w, h); + +@@ -2646,7 +2657,7 @@ static void dsi_update_screen_dispc(struct omap_display *display, + l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */ + dsi_write_reg(DSI_VC_TE(1), l); + +- dsi_vc_write_long_header(1, DSI_DT_DCS_LONG_WRITE, line_packet_len, 0); ++ dsi_vc_write_long_header(1, DSI_DT_DCS_LONG_WRITE, packet_len, 0); + + if (dsi.use_te) + l = FLD_MOD(l, 1, 30, 30); /* TE_EN */ +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0017-DSS2-Disable-video-planes-on-sync-lost-error.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0017-DSS2-Disable-video-planes-on-sync-lost-error.patch new file mode 100644 index 000000000..5b68b57da --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0017-DSS2-Disable-video-planes-on-sync-lost-error.patch @@ -0,0 +1,103 @@ +From 85848d329ca3a2d6ee6841cdc11cc5951d187931 Mon Sep 17 00:00:00 2001 +From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= +Date: Fri, 3 Apr 2009 19:09:20 +0200 +Subject: [PATCH] DSS2: Disable video planes on sync lost error +MIME-Version: 1.0 +Content-Type: text/plain; charset=utf-8 +Content-Transfer-Encoding: 8bit + +When encountering the sync lost error disable the display and all video +planes on the affected manager. Afterwards re-enable the display. + +Signed-off-by: Ville Syrjälä +--- + drivers/video/omap2/dss/dispc.c | 50 +++++++++++++++++++++++++++++++++++++++ + 1 files changed, 50 insertions(+), 0 deletions(-) + +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +index 1bc23f7..41734f3 100644 +--- a/drivers/video/omap2/dss/dispc.c ++++ b/drivers/video/omap2/dss/dispc.c +@@ -2518,29 +2518,79 @@ static void dispc_error_worker(struct work_struct *work) + } + + if (errors & DISPC_IRQ_SYNC_LOST) { ++ struct omap_overlay_manager *manager = NULL; ++ bool enable = false; ++ + DSSERR("SYNC_LOST, disabling LCD\n"); ++ + for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { + struct omap_overlay_manager *mgr; + mgr = omap_dss_get_overlay_manager(i); + + if (mgr->id == OMAP_DSS_CHANNEL_LCD) { ++ manager = mgr; ++ enable = mgr->display->state == ++ OMAP_DSS_DISPLAY_ACTIVE; + mgr->display->disable(mgr->display); + break; + } + } ++ ++ if (manager) { ++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) { ++ struct omap_overlay *ovl; ++ ovl = omap_dss_get_overlay(i); ++ ++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) ++ continue; ++ ++ if (ovl->id != 0 && ovl->manager == manager) ++ dispc_enable_plane(ovl->id, 0); ++ } ++ ++ dispc_go(manager->id); ++ mdelay(50); ++ if (enable) ++ manager->display->enable(manager->display); ++ } + } + + if (errors & DISPC_IRQ_SYNC_LOST_DIGIT) { ++ struct omap_overlay_manager *manager = NULL; ++ bool enable = false; ++ + DSSERR("SYNC_LOST_DIGIT, disabling TV\n"); ++ + for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) { + struct omap_overlay_manager *mgr; + mgr = omap_dss_get_overlay_manager(i); + + if (mgr->id == OMAP_DSS_CHANNEL_DIGIT) { ++ manager = mgr; ++ enable = mgr->display->state == ++ OMAP_DSS_DISPLAY_ACTIVE; + mgr->display->disable(mgr->display); + break; + } + } ++ ++ if (manager) { ++ for (i = 0; i < omap_dss_get_num_overlays(); ++i) { ++ struct omap_overlay *ovl; ++ ovl = omap_dss_get_overlay(i); ++ ++ if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC)) ++ continue; ++ ++ if (ovl->id != 0 && ovl->manager == manager) ++ dispc_enable_plane(ovl->id, 0); ++ } ++ ++ dispc_go(manager->id); ++ mdelay(50); ++ if (enable) ++ manager->display->enable(manager->display); ++ } + } + + if (errors & DISPC_IRQ_OCP_ERR) { +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0018-DSS2-check-for-ovl-paddr-only-when-enabling.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0018-DSS2-check-for-ovl-paddr-only-when-enabling.patch new file mode 100644 index 000000000..088135c0a --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0018-DSS2-check-for-ovl-paddr-only-when-enabling.patch @@ -0,0 +1,40 @@ +From 63e15ba8d5f95b13d3abf359da718537d769f112 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Tue, 7 Apr 2009 10:01:58 +0300 +Subject: [PATCH] DSS2: check for ovl paddr only when enabling + +It seems Xvideo uses SETUP_PLANE ioctl even when +the fb memory has not been allocated. Sigh. +--- + drivers/video/omap2/dss/overlay.c | 8 +++++--- + 1 files changed, 5 insertions(+), 3 deletions(-) + +diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c +index 9209acf..c047206 100644 +--- a/drivers/video/omap2/dss/overlay.c ++++ b/drivers/video/omap2/dss/overlay.c +@@ -281,6 +281,11 @@ int dss_check_overlay(struct omap_overlay *ovl, struct omap_display *display) + + info = &ovl->info; + ++ if (info->paddr == 0) { ++ DSSDBG("check_overlay failed: paddr 0\n"); ++ return -EINVAL; ++ } ++ + display->get_resolution(display, &dw, &dh); + + DSSDBG("check_overlay %d: (%d,%d %dx%d -> %dx%d) disp (%dx%d)\n", +@@ -331,9 +336,6 @@ static int dss_ovl_set_overlay_info(struct omap_overlay *ovl, + int r; + struct omap_overlay_info old_info; + +- if (info->paddr == 0) +- return -EINVAL; +- + old_info = ovl->info; + ovl->info = *info; + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0019-DSS2-Check-fclk-limits-when-configuring-video-plane.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0019-DSS2-Check-fclk-limits-when-configuring-video-plane.patch new file mode 100644 index 000000000..daa95ca50 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0019-DSS2-Check-fclk-limits-when-configuring-video-plane.patch @@ -0,0 +1,183 @@ +From 67f3fc050ab4e2006d5b7ec6ec341896627181ab Mon Sep 17 00:00:00 2001 +From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= +Date: Mon, 6 Apr 2009 17:32:04 +0200 +Subject: [PATCH] DSS2: Check fclk limits when configuring video planes +MIME-Version: 1.0 +Content-Type: text/plain; charset=utf-8 +Content-Transfer-Encoding: 8bit + +Check that the currect functional clock is fast enough to support +the requested scaling ratios. Also check if 5-tap filtering can be +used even though the downscaling ratio is less than 1:2 since the +functional clock rate required for 5-tap filtering can be less than +the requirement for 3-tap filtering, and 5-tap filtering should look +better. + +Signed-off-by: Ville Syrjälä +--- + drivers/video/omap2/dss/dispc.c | 104 ++++++++++++++++++++++++++++++++++++--- + 1 files changed, 97 insertions(+), 7 deletions(-) + +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +index 41734f3..61861d8 100644 +--- a/drivers/video/omap2/dss/dispc.c ++++ b/drivers/video/omap2/dss/dispc.c +@@ -1026,11 +1026,11 @@ static void _dispc_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu) + static void _dispc_set_scaling(enum omap_plane plane, + u16 orig_width, u16 orig_height, + u16 out_width, u16 out_height, +- bool ilace) ++ bool ilace, bool five_taps) + { + int fir_hinc; + int fir_vinc; +- int hscaleup, vscaleup, five_taps; ++ int hscaleup, vscaleup; + int fieldmode = 0; + int accu0 = 0; + int accu1 = 0; +@@ -1040,7 +1040,6 @@ static void _dispc_set_scaling(enum omap_plane plane, + + hscaleup = orig_width <= out_width; + vscaleup = orig_height <= out_height; +- five_taps = orig_height > out_height * 2; + + _dispc_set_scale_coef(plane, hscaleup, vscaleup, five_taps); + +@@ -1283,6 +1282,73 @@ static void calc_rotation_offset(u8 rotation, bool mirror, + } + } + ++static unsigned long calc_fclk_five_taps(u16 width, u16 height, ++ u16 out_width, u16 out_height, enum omap_color_mode color_mode) ++{ ++ u32 fclk = 0; ++ /* FIXME venc pclk? */ ++ u64 tmp, pclk = dispc_pclk_rate(); ++ ++ if (height > out_height) { ++ /* FIXME get real display PPL */ ++ unsigned int ppl = 800; ++ ++ tmp = pclk * height * out_width; ++ do_div(tmp, 2 * out_height * ppl); ++ fclk = tmp; ++ ++ if (height > 2 * out_height) { ++ tmp = pclk * (height - 2 * out_height) * out_width; ++ do_div(tmp, 2 * out_height * (ppl - out_width)); ++ fclk = max(fclk, (u32) tmp); ++ } ++ } ++ ++ if (width > out_width) { ++ tmp = pclk * width; ++ do_div(tmp, out_width); ++ fclk = max(fclk, (u32) tmp); ++ ++ if (color_mode == OMAP_DSS_COLOR_RGB24U) ++ fclk <<= 1; ++ } ++ ++ return fclk; ++} ++ ++static unsigned long calc_fclk(u16 width, u16 height, ++ u16 out_width, u16 out_height, ++ enum omap_color_mode color_mode, bool five_taps) ++{ ++ unsigned int hf, vf; ++ ++ if (five_taps) ++ return calc_fclk_five_taps(width, height, ++ out_width, out_height, color_mode); ++ ++ /* ++ * FIXME how to determine the 'A' factor ++ * for the no downscaling case ? ++ */ ++ ++ if (width > 3 * out_width) ++ hf = 4; ++ else if (width > 2 * out_width) ++ hf = 3; ++ else if (width > out_width) ++ hf = 2; ++ else ++ hf = 1; ++ ++ if (height > out_height) ++ vf = 2; ++ else ++ vf = 1; ++ ++ /* FIXME venc pclk? */ ++ return dispc_pclk_rate() * vf * hf; ++} ++ + static int _dispc_setup_plane(enum omap_plane plane, + enum omap_channel channel_out, + u32 paddr, u16 screen_width, +@@ -1294,7 +1360,7 @@ static int _dispc_setup_plane(enum omap_plane plane, + u8 rotation, int mirror) + { + const int maxdownscale = cpu_is_omap34xx() ? 4 : 2; +- bool five_taps = height > out_height * 2; ++ bool five_taps = 0; + bool fieldmode = 0; + int cconv = 0; + unsigned offset0, offset1; +@@ -1323,8 +1389,8 @@ static int _dispc_setup_plane(enum omap_plane plane, + } + } else { + /* video plane */ +- if (width > (2048 >> five_taps)) +- return -EINVAL; ++ ++ unsigned long fclk; + + if (out_width < width / maxdownscale || + out_width > width * 8) +@@ -1356,6 +1422,30 @@ static int _dispc_setup_plane(enum omap_plane plane, + default: + return -EINVAL; + } ++ ++ /* Must use 5-tap filter? */ ++ five_taps = height > out_height * 2; ++ ++ /* Try to use 5-tap filter whenever possible. */ ++ if (cpu_is_omap34xx() && !five_taps && ++ height > out_height && width <= 1024) { ++ fclk = calc_fclk_five_taps(width, height, ++ out_width, out_height, color_mode); ++ if (fclk <= dispc_fclk_rate()) ++ five_taps = true; ++ } ++ ++ if (width > (2048 >> five_taps)) ++ return -EINVAL; ++ ++ fclk = calc_fclk(width, height, out_width, out_height, ++ color_mode, five_taps); ++ ++ DSSDBG("required fclk rate = %lu Hz\n", fclk); ++ DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate()); ++ ++ if (fclk > dispc_fclk_rate()) ++ return -EINVAL; + } + + if (ilace && height >= out_height) +@@ -1399,7 +1489,7 @@ static int _dispc_setup_plane(enum omap_plane plane, + if (plane != OMAP_DSS_GFX) { + _dispc_set_scaling(plane, width, height, + out_width, out_height, +- ilace); ++ ilace, five_taps); + _dispc_set_vid_size(plane, out_width, out_height); + _dispc_set_vid_color_conv(plane, cconv); + } +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0020-DSS2-Check-scaling-limits-against-proper-values.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0020-DSS2-Check-scaling-limits-against-proper-values.patch new file mode 100644 index 000000000..b3248527e --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0020-DSS2-Check-scaling-limits-against-proper-values.patch @@ -0,0 +1,79 @@ +From 9f8f1613253656f155b3844c8255a560f86e0acd Mon Sep 17 00:00:00 2001 +From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= +Date: Mon, 6 Apr 2009 17:32:05 +0200 +Subject: [PATCH] DSS2: Check scaling limits against proper values +MIME-Version: 1.0 +Content-Type: text/plain; charset=utf-8 +Content-Transfer-Encoding: 8bit + +Move the ilace and fieldmode related height adjustments to be performed +before checking the scaling limits. + +Signed-off-by: Ville Syrjälä +--- + drivers/video/omap2/dss/dispc.c | 31 ++++++++++++++++--------------- + 1 files changed, 16 insertions(+), 15 deletions(-) + +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +index 61861d8..ae7be3d 100644 +--- a/drivers/video/omap2/dss/dispc.c ++++ b/drivers/video/omap2/dss/dispc.c +@@ -1366,10 +1366,25 @@ static int _dispc_setup_plane(enum omap_plane plane, + unsigned offset0, offset1; + s32 row_inc; + s32 pix_inc; ++ u16 frame_height = height; + + if (paddr == 0) + return -EINVAL; + ++ if (ilace && height >= out_height) ++ fieldmode = 1; ++ ++ if (ilace) { ++ if (fieldmode) ++ height /= 2; ++ pos_y /= 2; ++ out_height /= 2; ++ ++ DSSDBG("adjusting for ilace: height %d, pos_y %d, " ++ "out_height %d\n", ++ height, pos_y, out_height); ++ } ++ + if (plane == OMAP_DSS_GFX) { + if (width != out_width || height != out_height) + return -EINVAL; +@@ -1448,28 +1463,14 @@ static int _dispc_setup_plane(enum omap_plane plane, + return -EINVAL; + } + +- if (ilace && height >= out_height) +- fieldmode = 1; +- + calc_rotation_offset(rotation, mirror, +- screen_width, width, height, color_mode, ++ screen_width, width, frame_height, color_mode, + fieldmode, + &offset0, &offset1, &row_inc, &pix_inc); + + DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n", + offset0, offset1, row_inc, pix_inc); + +- if (ilace) { +- if (fieldmode) +- height /= 2; +- pos_y /= 2; +- out_height /= 2; +- +- DSSDBG("adjusting for ilace: height %d, pos_y %d, " +- "out_height %d\n", +- height, pos_y, out_height); +- } +- + _dispc_set_channel_out(plane, channel_out); + _dispc_set_color_mode(plane, color_mode); + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0021-DSS2-Add-venc-register-dump.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0021-DSS2-Add-venc-register-dump.patch new file mode 100644 index 000000000..31ff18022 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0021-DSS2-Add-venc-register-dump.patch @@ -0,0 +1,96 @@ +From c5e71be877e71c7df329205307e830f158c403bf Mon Sep 17 00:00:00 2001 +From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= +Date: Mon, 6 Apr 2009 17:32:06 +0200 +Subject: [PATCH] DSS2: Add venc register dump +MIME-Version: 1.0 +Content-Type: text/plain; charset=utf-8 +Content-Transfer-Encoding: 8bit + +Add a new file to debugfs to dump the VENC registers. The function +prototype was already there but the implementation was missing. + +Signed-off-by: Ville Syrjälä +--- + drivers/video/omap2/dss/venc.c | 55 ++++++++++++++++++++++++++++++++++++++++ + 1 files changed, 55 insertions(+), 0 deletions(-) + +diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c +index aceed9f..b655df4 100644 +--- a/drivers/video/omap2/dss/venc.c ++++ b/drivers/video/omap2/dss/venc.c +@@ -30,6 +30,7 @@ + #include + #include + #include ++#include + + #include + #include +@@ -81,6 +82,7 @@ + #define VENC_TVDETGP_INT_START_STOP_Y 0xB4 + #define VENC_GEN_CTRL 0xB8 + #define VENC_OUTPUT_CONTROL 0xC4 ++#define VENC_OUTPUT_TEST 0xC8 + #define VENC_DAC_B__DAC_C 0xC8 + + struct venc_config { +@@ -598,3 +600,56 @@ void venc_init_display(struct omap_display *display) + display->set_timings = venc_set_timings; + display->check_timings = venc_check_timings; + } ++ ++void venc_dump_regs(struct seq_file *s) ++{ ++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, venc_read_reg(r)) ++ ++ venc_enable_clocks(1); ++ ++ DUMPREG(VENC_F_CONTROL); ++ DUMPREG(VENC_VIDOUT_CTRL); ++ DUMPREG(VENC_SYNC_CTRL); ++ DUMPREG(VENC_LLEN); ++ DUMPREG(VENC_FLENS); ++ DUMPREG(VENC_HFLTR_CTRL); ++ DUMPREG(VENC_CC_CARR_WSS_CARR); ++ DUMPREG(VENC_C_PHASE); ++ DUMPREG(VENC_GAIN_U); ++ DUMPREG(VENC_GAIN_V); ++ DUMPREG(VENC_GAIN_Y); ++ DUMPREG(VENC_BLACK_LEVEL); ++ DUMPREG(VENC_BLANK_LEVEL); ++ DUMPREG(VENC_X_COLOR); ++ DUMPREG(VENC_M_CONTROL); ++ DUMPREG(VENC_BSTAMP_WSS_DATA); ++ DUMPREG(VENC_S_CARR); ++ DUMPREG(VENC_LINE21); ++ DUMPREG(VENC_LN_SEL); ++ DUMPREG(VENC_L21__WC_CTL); ++ DUMPREG(VENC_HTRIGGER_VTRIGGER); ++ DUMPREG(VENC_SAVID__EAVID); ++ DUMPREG(VENC_FLEN__FAL); ++ DUMPREG(VENC_LAL__PHASE_RESET); ++ DUMPREG(VENC_HS_INT_START_STOP_X); ++ DUMPREG(VENC_HS_EXT_START_STOP_X); ++ DUMPREG(VENC_VS_INT_START_X); ++ DUMPREG(VENC_VS_INT_STOP_X__VS_INT_START_Y); ++ DUMPREG(VENC_VS_INT_STOP_Y__VS_EXT_START_X); ++ DUMPREG(VENC_VS_EXT_STOP_X__VS_EXT_START_Y); ++ DUMPREG(VENC_VS_EXT_STOP_Y); ++ DUMPREG(VENC_AVID_START_STOP_X); ++ DUMPREG(VENC_AVID_START_STOP_Y); ++ DUMPREG(VENC_FID_INT_START_X__FID_INT_START_Y); ++ DUMPREG(VENC_FID_INT_OFFSET_Y__FID_EXT_START_X); ++ DUMPREG(VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y); ++ DUMPREG(VENC_TVDETGP_INT_START_STOP_X); ++ DUMPREG(VENC_TVDETGP_INT_START_STOP_Y); ++ DUMPREG(VENC_GEN_CTRL); ++ DUMPREG(VENC_OUTPUT_CONTROL); ++ DUMPREG(VENC_OUTPUT_TEST); ++ ++ venc_enable_clocks(0); ++ ++#undef DUMPREG ++} +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0022-DSS2-FB-remove-unused-var-warning.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0022-DSS2-FB-remove-unused-var-warning.patch new file mode 100644 index 000000000..d4fb327c7 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0022-DSS2-FB-remove-unused-var-warning.patch @@ -0,0 +1,27 @@ +From facfd479bb6efad76eec1e74048cb7a31da7287d Mon Sep 17 00:00:00 2001 +From: Imre Deak +Date: Mon, 6 Apr 2009 22:26:04 +0200 +Subject: [PATCH] DSS2: FB: remove unused var warning + +Signed-off-by: Imre Deak +--- + drivers/video/omap2/omapfb/omapfb-main.c | 2 ++ + 1 files changed, 2 insertions(+), 0 deletions(-) + +diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c +index afe40a9..12ce0c3 100644 +--- a/drivers/video/omap2/omapfb/omapfb-main.c ++++ b/drivers/video/omap2/omapfb/omapfb-main.c +@@ -1246,7 +1246,9 @@ static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size, + display->get_resolution(display, &w, &h); + + if (ofbi->rotation_type == OMAPFB_ROT_VRFB) { ++#ifdef DEBUG + int oldw = w, oldh = h; ++#endif + + omap_vrfb_adjust_size(&w, &h, bytespp); + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0023-DSS2-pass-the-default-FB-color-format-through-board.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0023-DSS2-pass-the-default-FB-color-format-through-board.patch new file mode 100644 index 000000000..649290553 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0023-DSS2-pass-the-default-FB-color-format-through-board.patch @@ -0,0 +1,214 @@ +From c02b843c2732bc7b15a3e35b5dd715d68225bbd1 Mon Sep 17 00:00:00 2001 +From: Imre Deak +Date: Wed, 8 Apr 2009 12:51:46 +0200 +Subject: [PATCH] DSS2: pass the default FB color format through board info + +Add a field to the FB memory region platform data, so that board +init code can pass a default color format to the driver. Set this +format as an initial setting for the given FB. + +This is needed for an upcoming patch that adds detection of the +color format set by the bootloader. + +Signed-off-by: Imre Deak +--- + drivers/video/omap2/omapfb/omapfb-main.c | 121 +++++++++++++++++++++++++++--- + drivers/video/omap2/omapfb/omapfb.h | 2 + + include/linux/omapfb.h | 5 + + 3 files changed, 117 insertions(+), 11 deletions(-) + +diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c +index 12ce0c3..67c67c2 100644 +--- a/drivers/video/omap2/omapfb/omapfb-main.c ++++ b/drivers/video/omap2/omapfb/omapfb-main.c +@@ -370,6 +370,21 @@ static enum omap_color_mode fb_mode_to_dss_mode(struct fb_var_screeninfo *var) + return -EINVAL; + } + ++static int dss_mode_to_fb_mode(enum omap_color_mode dssmode, ++ struct fb_var_screeninfo *var) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) { ++ struct omapfb_colormode *mode = &omapfb_colormodes[i]; ++ if (dssmode == mode->dssmode) { ++ assign_colormode_to_var(var, mode); ++ return 0; ++ } ++ } ++ return -ENOENT; ++} ++ + void set_fb_fix(struct fb_info *fbi) + { + struct fb_fix_screeninfo *fix = &fbi->fix; +@@ -1267,6 +1282,60 @@ static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size, + return omapfb_alloc_fbmem(fbi, size, paddr); + } + ++static enum omap_color_mode fb_format_to_dss_mode(enum omapfb_color_format format) ++{ ++ enum omap_color_mode mode; ++ ++ switch (format) { ++ case OMAPFB_COLOR_RGB565: ++ mode = OMAP_DSS_COLOR_RGB16; ++ break; ++ case OMAPFB_COLOR_YUV422: ++ mode = OMAP_DSS_COLOR_YUV2; ++ break; ++ case OMAPFB_COLOR_CLUT_8BPP: ++ mode = OMAP_DSS_COLOR_CLUT8; ++ break; ++ case OMAPFB_COLOR_CLUT_4BPP: ++ mode = OMAP_DSS_COLOR_CLUT4; ++ break; ++ case OMAPFB_COLOR_CLUT_2BPP: ++ mode = OMAP_DSS_COLOR_CLUT2; ++ break; ++ case OMAPFB_COLOR_CLUT_1BPP: ++ mode = OMAP_DSS_COLOR_CLUT1; ++ break; ++ case OMAPFB_COLOR_RGB444: ++ mode = OMAP_DSS_COLOR_RGB12U; ++ break; ++ case OMAPFB_COLOR_YUY422: ++ mode = OMAP_DSS_COLOR_UYVY; ++ break; ++ case OMAPFB_COLOR_ARGB16: ++ mode = OMAP_DSS_COLOR_ARGB16; ++ break; ++ case OMAPFB_COLOR_RGB24U: ++ mode = OMAP_DSS_COLOR_RGB24U; ++ break; ++ case OMAPFB_COLOR_RGB24P: ++ mode = OMAP_DSS_COLOR_RGB24P; ++ break; ++ case OMAPFB_COLOR_ARGB32: ++ mode = OMAP_DSS_COLOR_ARGB32; ++ break; ++ case OMAPFB_COLOR_RGBA32: ++ mode = OMAP_DSS_COLOR_RGBA32; ++ break; ++ case OMAPFB_COLOR_RGBX32: ++ mode = OMAP_DSS_COLOR_RGBX32; ++ break; ++ default: ++ mode = -EINVAL; ++ } ++ ++ return mode; ++} ++ + static int omapfb_parse_vram_param(const char *param, int max_entries, + unsigned long *sizes, unsigned long *paddrs) + { +@@ -1483,9 +1552,36 @@ int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi) + } + + var->nonstd = 0; ++ var->bits_per_pixel = 0; + + var->rotate = ofbi->rotation; + ++ /* ++ * Check if there is a default color format set in the board file, ++ * and use this format instead the default deducted from the ++ * display bpp. ++ */ ++ if (fbdev->dev->platform_data) { ++ struct omapfb_platform_data *opd; ++ int id = ofbi->id; ++ ++ opd = fbdev->dev->platform_data; ++ if (opd->mem_desc.region[id].format_used) { ++ enum omap_color_mode mode; ++ enum omapfb_color_format format; ++ ++ format = opd->mem_desc.region[id].format; ++ mode = fb_format_to_dss_mode(format); ++ if (mode < 0) { ++ r = mode; ++ goto err; ++ } ++ r = dss_mode_to_fb_mode(mode, var); ++ if (r < 0) ++ goto err; ++ } ++ } ++ + if (display) { + u16 w, h; + display->get_resolution(display, &w, &h); +@@ -1502,16 +1598,18 @@ int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi) + var->xres_virtual = var->xres; + var->yres_virtual = var->yres; + +- switch (display->get_recommended_bpp(display)) { +- case 16: +- var->bits_per_pixel = 16; +- break; +- case 24: +- var->bits_per_pixel = 32; +- break; +- default: +- dev_err(fbdev->dev, "illegal display bpp\n"); +- return -EINVAL; ++ if (!var->bits_per_pixel) { ++ switch (display->get_recommended_bpp(display)) { ++ case 16: ++ var->bits_per_pixel = 16; ++ break; ++ case 24: ++ var->bits_per_pixel = 32; ++ break; ++ default: ++ dev_err(fbdev->dev, "illegal display bpp\n"); ++ return -EINVAL; ++ } + } + } else { + /* if there's no display, let's just guess some basic values */ +@@ -1519,7 +1617,8 @@ int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi) + var->yres = 240; + var->xres_virtual = var->xres; + var->yres_virtual = var->yres; +- var->bits_per_pixel = 16; ++ if (!var->bits_per_pixel) ++ var->bits_per_pixel = 16; + } + + r = check_fb_var(fbi, var); +diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h +index 65e9e6e..2607def 100644 +--- a/drivers/video/omap2/omapfb/omapfb.h ++++ b/drivers/video/omap2/omapfb/omapfb.h +@@ -27,6 +27,8 @@ + #define DEBUG + #endif + ++#include ++ + #ifdef DEBUG + extern unsigned int omapfb_debug; + #define DBG(format, ...) \ +diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h +index 96190b2..7a34f22 100644 +--- a/include/linux/omapfb.h ++++ b/include/linux/omapfb.h +@@ -298,6 +298,11 @@ struct omapfb_mem_region { + void __iomem *vaddr; + unsigned long size; + u8 type; /* OMAPFB_PLANE_MEM_* */ ++ enum omapfb_color_format format;/* OMAPFB_COLOR_* */ ++ unsigned format_used:1; /* Must be set when format is set. ++ * Needed b/c of the badly chosen 0 ++ * base for OMAPFB_COLOR_* values ++ */ + unsigned alloc:1; /* allocated by the driver */ + unsigned map:1; /* kernel mapped by the driver */ + }; +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0024-DSS2-Beagle-Use-gpio_set_value.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0024-DSS2-Beagle-Use-gpio_set_value.patch new file mode 100644 index 000000000..559e49f40 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0024-DSS2-Beagle-Use-gpio_set_value.patch @@ -0,0 +1,48 @@ +From 2710416c43572652cb5355a5eaf68038c95659e8 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Thu, 9 Apr 2009 12:10:46 +0300 +Subject: [PATCH] DSS2: Beagle: Use gpio_set_value + +--- + arch/arm/mach-omap2/board-omap3beagle.c | 10 +++++++--- + 1 files changed, 7 insertions(+), 3 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index b67e7a5..8c1961d 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -372,7 +372,7 @@ static struct platform_device keys_gpio = { + static int beagle_enable_dvi(struct omap_display *display) + { + if (display->hw_config.panel_reset_gpio != -1) +- gpio_direction_output(display->hw_config.panel_reset_gpio, 1); ++ gpio_set_value(display->hw_config.panel_reset_gpio, 1); + + return 0; + } +@@ -380,7 +380,7 @@ static int beagle_enable_dvi(struct omap_display *display) + static void beagle_disable_dvi(struct omap_display *display) + { + if (display->hw_config.panel_reset_gpio != -1) +- gpio_direction_output(display->hw_config.panel_reset_gpio, 0); ++ gpio_set_value(display->hw_config.panel_reset_gpio, 0); + } + + static struct omap_dss_display_config beagle_display_data_dvi = { +@@ -445,8 +445,12 @@ static void __init beagle_display_init(void) + int r; + + r = gpio_request(beagle_display_data_dvi.panel_reset_gpio, "DVI reset"); +- if (r < 0) ++ if (r < 0) { + printk(KERN_ERR "Unable to get DVI reset GPIO\n"); ++ return; ++ } ++ ++ gpio_direction_output(beagle_display_data_dvi.panel_reset_gpio, 0); + } + + static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0025-DSS2-VRFB-Macro-for-calculating-base-address-of-th.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0025-DSS2-VRFB-Macro-for-calculating-base-address-of-th.patch new file mode 100644 index 000000000..e81b1331b --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0025-DSS2-VRFB-Macro-for-calculating-base-address-of-th.patch @@ -0,0 +1,28 @@ +From 990f3160d33361c135ee72e91f202e05a8c378fc Mon Sep 17 00:00:00 2001 +From: Hardik Shah +Date: Mon, 13 Apr 2009 18:50:24 +0530 +Subject: [PATCH] DSS2: VRFB: Macro for calculating base address of the VRFB context was faulty + +Signed-off-by: Hardik Shah +--- + arch/arm/plat-omap/vrfb.c | 4 ++-- + 1 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/arch/arm/plat-omap/vrfb.c b/arch/arm/plat-omap/vrfb.c +index 7e0f8fc..d68065f 100644 +--- a/arch/arm/plat-omap/vrfb.c ++++ b/arch/arm/plat-omap/vrfb.c +@@ -16,8 +16,8 @@ + + #define SMS_ROT_VIRT_BASE(context, rot) \ + (((context >= 4) ? 0xD0000000 : 0x70000000) \ +- | 0x4000000 * (context) \ +- | 0x1000000 * (rot)) ++ + (0x4000000 * (context)) \ ++ + (0x1000000 * (rot))) + + #define OMAP_VRFB_SIZE (2048 * 2048 * 4) + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0026-DSS2-DSI-sidlemode-to-noidle-while-sending-frame.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0026-DSS2-DSI-sidlemode-to-noidle-while-sending-frame.patch new file mode 100644 index 000000000..6ee3908d1 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0026-DSS2-DSI-sidlemode-to-noidle-while-sending-frame.patch @@ -0,0 +1,78 @@ +From a1e8018c0806a1a0579eda4b93b7d6764a2ff643 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Wed, 15 Apr 2009 14:06:54 +0300 +Subject: [PATCH] DSS2: DSI: sidlemode to noidle while sending frame + +DISPC interrupts are not wake-up capable. Smart-idle in DISPC_SIDLEMODE +causes DSS interface to go to idle at the end of the frame, and the +FRAMEDONE interrupt is then delayed until something wakes up the DSS +interface. + +So we set SIDLEMODE to no-idle when we start sending the frame, and +set it back to smart-idle after receiving FRAMEDONE. +--- + drivers/video/omap2/dss/dispc.c | 10 ++++++++++ + drivers/video/omap2/dss/dsi.c | 4 ++++ + drivers/video/omap2/dss/dss.h | 3 +++ + 3 files changed, 17 insertions(+), 0 deletions(-) + +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +index ae7be3d..16c68b8 100644 +--- a/drivers/video/omap2/dss/dispc.c ++++ b/drivers/video/omap2/dss/dispc.c +@@ -2791,6 +2791,16 @@ static void _omap_dispc_initialize_irq(void) + omap_dispc_set_irqs(); + } + ++void dispc_enable_sidle(void) ++{ ++ REG_FLD_MOD(DISPC_SYSCONFIG, 2, 4, 3); /* SIDLEMODE: smart idle */ ++} ++ ++void dispc_disable_sidle(void) ++{ ++ REG_FLD_MOD(DISPC_SYSCONFIG, 1, 4, 3); /* SIDLEMODE: no idle */ ++} ++ + static void _omap_dispc_initial_config(void) + { + u32 l; +diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c +index 66ac6ea..50af925 100644 +--- a/drivers/video/omap2/dss/dsi.c ++++ b/drivers/video/omap2/dss/dsi.c +@@ -2665,6 +2665,8 @@ static void dsi_update_screen_dispc(struct omap_display *display, + l = FLD_MOD(l, 1, 31, 31); /* TE_START */ + dsi_write_reg(DSI_VC_TE(1), l); + ++ dispc_disable_sidle(); ++ + dispc_enable_lcd_out(1); + + if (dsi.use_te) +@@ -2678,6 +2680,8 @@ static void framedone_callback(void *data, u32 mask) + return; + } + ++ dispc_enable_sidle(); ++ + dsi.framedone_scheduled = 1; + + /* We get FRAMEDONE when DISPC has finished sending pixels and turns +diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h +index 0be42b6..d0917a8 100644 +--- a/drivers/video/omap2/dss/dss.h ++++ b/drivers/video/omap2/dss/dss.h +@@ -244,6 +244,9 @@ void dispc_fake_vsync_irq(void); + void dispc_save_context(void); + void dispc_restore_context(void); + ++void dispc_enable_sidle(void); ++void dispc_disable_sidle(void); ++ + void dispc_lcd_enable_signal_polarity(bool act_high); + void dispc_lcd_enable_signal(bool enable); + void dispc_pck_free_enable(bool enable); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0027-DSS2-VRFB-rotation-and-mirroring-implemented.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0027-DSS2-VRFB-rotation-and-mirroring-implemented.patch new file mode 100644 index 000000000..b56e32a11 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0027-DSS2-VRFB-rotation-and-mirroring-implemented.patch @@ -0,0 +1,324 @@ +From 77e848eeba461e9b55b09d39fd0d640caea13e19 Mon Sep 17 00:00:00 2001 +From: Hardik Shah +Date: Thu, 9 Apr 2009 12:09:44 +0530 +Subject: [PATCH] DSS2: VRFB rotation and mirroring implemented. + +DSS2 modified to accept the rotation_type input +to get the dma or VRFB rotation. + +DSS2: VRFB: Changed to pass DSS mode to vrfb_setup instead of Bpp. + +VRFB size registers requires the width to be halved when the +mode is YUV or UYVY. So modifed to pass the mode to omap_vrfb_setup +function. + +Code added by Tim Yamin for few bug fixes + +Signed-off-by: Tim Yamin +Signed-off-by: Hardik Shah +--- + arch/arm/plat-omap/include/mach/display.h | 6 ++ + arch/arm/plat-omap/include/mach/vrfb.h | 3 +- + arch/arm/plat-omap/vrfb.c | 36 +++++++++- + drivers/video/omap2/dss/dispc.c | 109 +++++++++++++++++++++++++++-- + drivers/video/omap2/dss/dss.h | 1 + + drivers/video/omap2/dss/manager.c | 1 + + 6 files changed, 144 insertions(+), 12 deletions(-) + +diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h +index 6b702c7..b0a6272 100644 +--- a/arch/arm/plat-omap/include/mach/display.h ++++ b/arch/arm/plat-omap/include/mach/display.h +@@ -341,6 +341,11 @@ enum omap_dss_overlay_managers { + + struct omap_overlay_manager; + ++enum omap_dss_rotation_type { ++ OMAP_DSS_ROT_DMA = 0, ++ OMAP_DSS_ROT_VRFB = 1, ++}; ++ + struct omap_overlay_info { + bool enabled; + +@@ -351,6 +356,7 @@ struct omap_overlay_info { + u16 height; + enum omap_color_mode color_mode; + u8 rotation; ++ enum omap_dss_rotation_type rotation_type; + bool mirror; + + u16 pos_x; +diff --git a/arch/arm/plat-omap/include/mach/vrfb.h b/arch/arm/plat-omap/include/mach/vrfb.h +index 2047862..12c7fab 100644 +--- a/arch/arm/plat-omap/include/mach/vrfb.h ++++ b/arch/arm/plat-omap/include/mach/vrfb.h +@@ -24,6 +24,7 @@ + #ifndef __VRFB_H + #define __VRFB_H + ++#include + #define OMAP_VRFB_LINE_LEN 2048 + + struct vrfb +@@ -42,6 +43,6 @@ extern void omap_vrfb_adjust_size(u16 *width, u16 *height, + u8 bytespp); + extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, + u16 width, u16 height, +- u8 bytespp); ++ enum omap_color_mode color_mode); + + #endif /* __VRFB_H */ +diff --git a/arch/arm/plat-omap/vrfb.c b/arch/arm/plat-omap/vrfb.c +index d68065f..2f08f6d 100644 +--- a/arch/arm/plat-omap/vrfb.c ++++ b/arch/arm/plat-omap/vrfb.c +@@ -5,7 +5,6 @@ + + #include + #include +- + /*#define DEBUG*/ + + #ifdef DEBUG +@@ -50,19 +49,48 @@ EXPORT_SYMBOL(omap_vrfb_adjust_size); + + void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, + u16 width, u16 height, +- u8 bytespp) ++ enum omap_color_mode color_mode) + { + unsigned pixel_size_exp; + u16 vrfb_width; + u16 vrfb_height; + u8 ctx = vrfb->context; ++ u8 bytespp; + + DBG("omapfb_set_vrfb(%d, %lx, %dx%d, %d)\n", ctx, paddr, + width, height, bytespp); + +- if (bytespp == 4) ++ switch (color_mode) { ++ case OMAP_DSS_COLOR_RGB16: ++ case OMAP_DSS_COLOR_ARGB16: ++ bytespp = 2; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24P: ++ bytespp = 3; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24U: ++ case OMAP_DSS_COLOR_ARGB32: ++ case OMAP_DSS_COLOR_RGBA32: ++ case OMAP_DSS_COLOR_RGBX32: ++ case OMAP_DSS_COLOR_YUV2: ++ case OMAP_DSS_COLOR_UYVY: ++ bytespp = 4; ++ break; ++ ++ default: ++ BUG(); ++ return; ++ } ++ ++ if (color_mode == OMAP_DSS_COLOR_YUV2 || ++ color_mode == OMAP_DSS_COLOR_UYVY) ++ width >>= 1; ++ ++ if (bytespp == 4) { + pixel_size_exp = 2; +- else if (bytespp == 2) ++ } else if (bytespp == 2) + pixel_size_exp = 1; + else + BUG(); +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +index 16c68b8..23a8155 100644 +--- a/drivers/video/omap2/dss/dispc.c ++++ b/drivers/video/omap2/dss/dispc.c +@@ -1106,7 +1106,7 @@ static void _dispc_set_rotation_attrs(enum omap_plane plane, u8 rotation, + case 0: vidrot = 0; break; + case 1: vidrot = 1; break; + case 2: vidrot = 2; break; +- case 3: vidrot = 1; break; ++ case 3: vidrot = 3; break; + } + } + +@@ -1134,7 +1134,92 @@ static s32 pixinc(int pixels, u8 ps) + BUG(); + } + +-static void calc_rotation_offset(u8 rotation, bool mirror, ++static void calc_vrfb_rotation_offset(u8 rotation, bool mirror, ++ u16 screen_width, ++ u16 width, u16 height, ++ enum omap_color_mode color_mode, bool fieldmode, ++ unsigned *offset0, unsigned *offset1, ++ s32 *row_inc, s32 *pix_inc) ++{ ++ u8 ps; ++ ++ switch (color_mode) { ++ case OMAP_DSS_COLOR_RGB16: ++ case OMAP_DSS_COLOR_ARGB16: ++ ps = 2; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24P: ++ ps = 3; ++ break; ++ ++ case OMAP_DSS_COLOR_RGB24U: ++ case OMAP_DSS_COLOR_ARGB32: ++ case OMAP_DSS_COLOR_RGBA32: ++ case OMAP_DSS_COLOR_RGBX32: ++ case OMAP_DSS_COLOR_YUV2: ++ case OMAP_DSS_COLOR_UYVY: ++ ps = 4; ++ break; ++ ++ default: ++ BUG(); ++ return; ++ } ++ ++ DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width, ++ width, height); ++ switch (rotation + mirror * 4) { ++ case 0: ++ case 2: ++ /* ++ * If the pixel format is YUV or UYVY divide the width ++ * of the image by 2 for 0 and 180 degree rotation. ++ */ ++ if (color_mode == OMAP_DSS_COLOR_YUV2 || ++ color_mode == OMAP_DSS_COLOR_UYVY) ++ width = width >> 1; ++ case 1: ++ case 3: ++ *offset0 = 0; ++ if (fieldmode) ++ *offset1 = screen_width * ps; ++ else ++ *offset1 = 0; ++ ++ *row_inc = pixinc(1 + (screen_width - width) + ++ (fieldmode ? screen_width : 0), ++ ps); ++ *pix_inc = pixinc(1, ps); ++ break; ++ ++ case 4: ++ case 6: ++ /* If the pixel format is YUV or UYVY divide the width ++ * of the image by 2 for 0 degree and 180 degree ++ */ ++ if (color_mode == OMAP_DSS_COLOR_YUV2 || ++ color_mode == OMAP_DSS_COLOR_UYVY) ++ width = width >> 1; ++ case 5: ++ case 7: ++ *offset0 = 0; ++ if (fieldmode) ++ *offset1 = screen_width * ps; ++ else ++ *offset1 = 0; ++ *row_inc = pixinc(1 - (screen_width + width) - ++ (fieldmode ? screen_width : 0), ++ ps); ++ *pix_inc = pixinc(1, ps); ++ break; ++ ++ default: ++ BUG(); ++ } ++} ++ ++static void calc_dma_rotation_offset(u8 rotation, bool mirror, + u16 screen_width, + u16 width, u16 height, + enum omap_color_mode color_mode, bool fieldmode, +@@ -1357,6 +1442,7 @@ static int _dispc_setup_plane(enum omap_plane plane, + u16 out_width, u16 out_height, + enum omap_color_mode color_mode, + bool ilace, ++ enum omap_dss_rotation_type rotation_type, + u8 rotation, int mirror) + { + const int maxdownscale = cpu_is_omap34xx() ? 4 : 2; +@@ -1463,10 +1549,16 @@ static int _dispc_setup_plane(enum omap_plane plane, + return -EINVAL; + } + +- calc_rotation_offset(rotation, mirror, +- screen_width, width, frame_height, color_mode, +- fieldmode, +- &offset0, &offset1, &row_inc, &pix_inc); ++ if (rotation_type == OMAP_DSS_ROT_DMA) ++ calc_dma_rotation_offset(rotation, mirror, ++ screen_width, width, frame_height, color_mode, ++ fieldmode, ++ &offset0, &offset1, &row_inc, &pix_inc); ++ else ++ calc_vrfb_rotation_offset(rotation, mirror, ++ screen_width, width, frame_height, color_mode, ++ fieldmode, ++ &offset0, &offset1, &row_inc, &pix_inc); + + DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n", + offset0, offset1, row_inc, pix_inc); +@@ -2889,6 +2981,7 @@ int dispc_setup_plane(enum omap_plane plane, enum omap_channel channel_out, + u16 out_width, u16 out_height, + enum omap_color_mode color_mode, + bool ilace, ++ enum omap_dss_rotation_type rotation_type, + u8 rotation, bool mirror) + { + int r = 0; +@@ -2909,6 +3002,7 @@ int dispc_setup_plane(enum omap_plane plane, enum omap_channel channel_out, + width, height, + out_width, out_height, + color_mode, ilace, ++ rotation_type, + rotation, mirror); + + enable_clocks(0); +@@ -3122,7 +3216,8 @@ void dispc_setup_partial_planes(struct omap_display *display, + pw, ph, + pow, poh, + pi->color_mode, 0, +- pi->rotation, // XXX rotation probably wrong ++ pi->rotation_type, ++ pi->rotation, + pi->mirror); + + dispc_enable_plane(ovl->id, 1); +diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h +index d0917a8..584dce6 100644 +--- a/drivers/video/omap2/dss/dss.h ++++ b/drivers/video/omap2/dss/dss.h +@@ -272,6 +272,7 @@ int dispc_setup_plane(enum omap_plane plane, enum omap_channel channel_out, + u16 out_width, u16 out_height, + enum omap_color_mode color_mode, + bool ilace, ++ enum omap_dss_rotation_type rotation_type, + u8 rotation, bool mirror); + + void dispc_go(enum omap_channel channel); +diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c +index b0fee80..8ca0bbb 100644 +--- a/drivers/video/omap2/dss/manager.c ++++ b/drivers/video/omap2/dss/manager.c +@@ -395,6 +395,7 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) + outh, + ovl->info.color_mode, + ilace, ++ ovl->info.rotation_type, + ovl->info.rotation, + ovl->info.mirror); + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0028-DSS2-OMAPFB-Added-support-for-the-YUV-VRFB-rotatio.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0028-DSS2-OMAPFB-Added-support-for-the-YUV-VRFB-rotatio.patch new file mode 100644 index 000000000..6400da3c2 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0028-DSS2-OMAPFB-Added-support-for-the-YUV-VRFB-rotatio.patch @@ -0,0 +1,236 @@ +From c09f1a0642fd58a1b081594ea36dfd1bf71aec52 Mon Sep 17 00:00:00 2001 +From: Hardik Shah +Date: Thu, 9 Apr 2009 12:13:07 +0530 +Subject: [PATCH] DSS2: OMAPFB: Added support for the YUV VRFB rotation and mirroring. + +DSS2 now requires roatation_type to be specified by driver. +Added support for that. +DSS2 OMAPFB: Modified to pass the dss mode to omap_vrfb_setup function. + +VRFB size register requires the width to be halved when the +mode is YUV or UYVY. So VRFB is modifed to pass the mode to omap_vrfb_setup +function. + +Few changes done by Tim Yamin +Signed-off-by: Tim Yamin +Signed-off-by: Hardik Shah +--- + arch/arm/plat-omap/vrfb.c | 4 +- + drivers/video/omap2/omapfb/omapfb-main.c | 59 ++++++++++++++---------------- + drivers/video/omap2/omapfb/omapfb.h | 7 +--- + 3 files changed, 30 insertions(+), 40 deletions(-) + +diff --git a/arch/arm/plat-omap/vrfb.c b/arch/arm/plat-omap/vrfb.c +index 2f08f6d..2ae0d68 100644 +--- a/arch/arm/plat-omap/vrfb.c ++++ b/arch/arm/plat-omap/vrfb.c +@@ -88,9 +88,9 @@ void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, + color_mode == OMAP_DSS_COLOR_UYVY) + width >>= 1; + +- if (bytespp == 4) { ++ if (bytespp == 4) + pixel_size_exp = 2; +- } else if (bytespp == 2) ++ else if (bytespp == 2) + pixel_size_exp = 1; + else + BUG(); +diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c +index 67c67c2..57f5900 100644 +--- a/drivers/video/omap2/omapfb/omapfb-main.c ++++ b/drivers/video/omap2/omapfb/omapfb-main.c +@@ -176,15 +176,9 @@ static unsigned omapfb_get_vrfb_offset(struct omapfb_info *ofbi, int rot) + + static u32 omapfb_get_region_rot_paddr(struct omapfb_info *ofbi) + { +- if (ofbi->rotation_type == OMAPFB_ROT_VRFB) { +- unsigned offset; +- int rot; +- +- rot = ofbi->rotation; +- +- offset = omapfb_get_vrfb_offset(ofbi, rot); +- +- return ofbi->region.vrfb.paddr[rot] + offset; ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { ++ return ofbi->region.vrfb.paddr[ofbi->rotation] ++ + omapfb_get_vrfb_offset(ofbi, ofbi->rotation); + } else { + return ofbi->region.paddr; + } +@@ -192,7 +186,7 @@ static u32 omapfb_get_region_rot_paddr(struct omapfb_info *ofbi) + + u32 omapfb_get_region_paddr(struct omapfb_info *ofbi) + { +- if (ofbi->rotation_type == OMAPFB_ROT_VRFB) ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) + return ofbi->region.vrfb.paddr[0]; + else + return ofbi->region.paddr; +@@ -200,7 +194,7 @@ u32 omapfb_get_region_paddr(struct omapfb_info *ofbi) + + void __iomem *omapfb_get_region_vaddr(struct omapfb_info *ofbi) + { +- if (ofbi->rotation_type == OMAPFB_ROT_VRFB) ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) + return ofbi->region.vrfb.vaddr[0]; + else + return ofbi->region.vaddr; +@@ -398,7 +392,7 @@ void set_fb_fix(struct fb_info *fbi) + fbi->screen_base = (char __iomem *)omapfb_get_region_vaddr(ofbi); + + /* used by mmap in fbmem.c */ +- if (ofbi->rotation_type == OMAPFB_ROT_VRFB) ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) + fix->line_length = + (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3; + else +@@ -434,11 +428,14 @@ void set_fb_fix(struct fb_info *fbi) + fix->xpanstep = 1; + fix->ypanstep = 1; + +- if (rg->size) { +- if (ofbi->rotation_type == OMAPFB_ROT_VRFB) +- omap_vrfb_setup(&rg->vrfb, rg->paddr, +- var->xres_virtual, var->yres_virtual, +- var->bits_per_pixel >> 3); ++ if (rg->size && ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { ++ enum omap_color_mode mode = 0; ++ mode = fb_mode_to_dss_mode(var); ++ ++ omap_vrfb_setup(&rg->vrfb, rg->paddr, ++ var->xres_virtual, ++ var->yres_virtual, ++ mode); + } + } + +@@ -527,7 +524,7 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var) + if (var->yres > var->yres_virtual) + var->yres = var->yres_virtual; + +- if (ofbi->rotation_type == OMAPFB_ROT_VRFB) ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) + line_size = OMAP_VRFB_LINE_LEN * bytespp; + else + line_size = var->xres_virtual * bytespp; +@@ -549,7 +546,7 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var) + + if (line_size * var->yres_virtual > max_frame_size) { + DBG("can't fit FB into memory, reducing x\n"); +- if (ofbi->rotation_type == OMAPFB_ROT_VRFB) ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) + return -EINVAL; + + var->xres_virtual = max_frame_size / var->yres_virtual / +@@ -672,7 +669,7 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, + struct omap_overlay_info info; + int xres, yres; + int screen_width; +- int rot, mirror; ++ int mirror; + + DBG("setup_overlay %d, posx %d, posy %d, outw %d, outh %d\n", ofbi->id, + posx, posy, outw, outh); +@@ -688,7 +685,7 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, + offset = ((var->yoffset * var->xres_virtual + + var->xoffset) * var->bits_per_pixel) >> 3; + +- if (ofbi->rotation_type == OMAPFB_ROT_VRFB) { ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { + data_start_p = omapfb_get_region_rot_paddr(ofbi); + data_start_v = NULL; + } else { +@@ -711,13 +708,10 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, + + ovl->get_overlay_info(ovl, &info); + +- if (ofbi->rotation_type == OMAPFB_ROT_VRFB) { +- rot = 0; ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) + mirror = 0; +- } else { +- rot = ofbi->rotation; ++ else + mirror = ofbi->mirror; +- } + + info.paddr = data_start_p; + info.vaddr = data_start_v; +@@ -725,7 +719,8 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, + info.width = xres; + info.height = yres; + info.color_mode = mode; +- info.rotation = rot; ++ info.rotation_type = ofbi->rotation_type; ++ info.rotation = ofbi->rotation; + info.mirror = mirror; + + info.pos_x = posx; +@@ -1121,7 +1116,7 @@ static void omapfb_free_fbmem(struct fb_info *fbi) + if (rg->vaddr) + iounmap(rg->vaddr); + +- if (ofbi->rotation_type == OMAPFB_ROT_VRFB) { ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { + /* unmap the 0 angle rotation */ + if (rg->vrfb.vaddr[0]) { + iounmap(rg->vrfb.vaddr[0]); +@@ -1181,7 +1176,7 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size, + return -ENOMEM; + } + +- if (ofbi->rotation_type != OMAPFB_ROT_VRFB) { ++ if (ofbi->rotation_type != OMAP_DSS_ROT_VRFB) { + vaddr = ioremap_wc(paddr, size); + + if (!vaddr) { +@@ -1260,7 +1255,7 @@ static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size, + + display->get_resolution(display, &w, &h); + +- if (ofbi->rotation_type == OMAPFB_ROT_VRFB) { ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { + #ifdef DEBUG + int oldw = w, oldh = h; + #endif +@@ -1701,8 +1696,8 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev) + ofbi->id = i; + + /* assign these early, so that fb alloc can use them */ +- ofbi->rotation_type = def_vrfb ? OMAPFB_ROT_VRFB : +- OMAPFB_ROT_DMA; ++ ofbi->rotation_type = def_vrfb ? OMAP_DSS_ROT_VRFB : ++ OMAP_DSS_ROT_DMA; + ofbi->rotation = def_rotate; + ofbi->mirror = def_mirror; + +diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h +index 2607def..43f6922 100644 +--- a/drivers/video/omap2/omapfb/omapfb.h ++++ b/drivers/video/omap2/omapfb/omapfb.h +@@ -53,11 +53,6 @@ struct omapfb2_mem_region { + bool map; /* kernel mapped by the driver */ + }; + +-enum omapfb_rotation_type { +- OMAPFB_ROT_DMA = 0, +- OMAPFB_ROT_VRFB = 1, +-}; +- + /* appended to fb_info */ + struct omapfb_info { + int id; +@@ -66,7 +61,7 @@ struct omapfb_info { + int num_overlays; + struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB]; + struct omapfb2_device *fbdev; +- enum omapfb_rotation_type rotation_type; ++ enum omap_dss_rotation_type rotation_type; + u8 rotation; + bool mirror; + }; +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0029-DSS2-OMAPFB-Set-line_length-correctly-for-YUV-with.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0029-DSS2-OMAPFB-Set-line_length-correctly-for-YUV-with.patch new file mode 100644 index 000000000..072978670 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0029-DSS2-OMAPFB-Set-line_length-correctly-for-YUV-with.patch @@ -0,0 +1,61 @@ +From a8a37babe4856170f4cba86c425a8f21975d9e9e Mon Sep 17 00:00:00 2001 +From: Tim Yamin +Date: Mon, 13 Apr 2009 13:57:42 -0700 +Subject: [PATCH] DSS2: OMAPFB: Set line_length correctly for YUV with VRFB. + +Signed-off-by: Tim Yamin +--- + drivers/video/omap2/omapfb/omapfb-main.c | 30 +++++++++++++++++++++++++----- + 1 files changed, 25 insertions(+), 5 deletions(-) + +diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c +index 57f5900..cd63740 100644 +--- a/drivers/video/omap2/omapfb/omapfb-main.c ++++ b/drivers/video/omap2/omapfb/omapfb-main.c +@@ -392,10 +392,19 @@ void set_fb_fix(struct fb_info *fbi) + fbi->screen_base = (char __iomem *)omapfb_get_region_vaddr(ofbi); + + /* used by mmap in fbmem.c */ +- if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) +- fix->line_length = +- (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3; +- else ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { ++ switch (var->nonstd) { ++ case OMAPFB_COLOR_YUV422: ++ case OMAPFB_COLOR_YUY422: ++ fix->line_length = ++ (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 2; ++ break; ++ default: ++ fix->line_length = ++ (OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3; ++ break; ++ } ++ } else + fix->line_length = + (var->xres_virtual * var->bits_per_pixel) >> 3; + fix->smem_start = omapfb_get_region_paddr(ofbi); +@@ -704,7 +713,18 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl, + goto err; + } + +- screen_width = fix->line_length / (var->bits_per_pixel >> 3); ++ switch (var->nonstd) { ++ case OMAPFB_COLOR_YUV422: ++ case OMAPFB_COLOR_YUY422: ++ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) { ++ screen_width = fix->line_length ++ / (var->bits_per_pixel >> 2); ++ break; ++ } ++ default: ++ screen_width = fix->line_length / (var->bits_per_pixel >> 3); ++ break; ++ } + + ovl->get_overlay_info(ovl, &info); + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0030-DSS2-dispc_get_trans_key-was-returning-wrong-key-ty.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0030-DSS2-dispc_get_trans_key-was-returning-wrong-key-ty.patch new file mode 100644 index 000000000..7e2bb4893 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0030-DSS2-dispc_get_trans_key-was-returning-wrong-key-ty.patch @@ -0,0 +1,29 @@ +From bda19b9359d9dc60f8b0beb5685e173e236ee30f Mon Sep 17 00:00:00 2001 +From: Hardik Shah +Date: Wed, 15 Apr 2009 17:05:18 +0530 +Subject: [PATCH] DSS2: dispc_get_trans_key was returning wrong key type + +Signed-off-by: Hardik Shah +--- + drivers/video/omap2/dss/dispc.c | 4 ++-- + 1 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +index 23a8155..076d3d4 100644 +--- a/drivers/video/omap2/dss/dispc.c ++++ b/drivers/video/omap2/dss/dispc.c +@@ -1826,9 +1826,9 @@ void dispc_get_trans_key(enum omap_channel ch, + enable_clocks(1); + if (type) { + if (ch == OMAP_DSS_CHANNEL_LCD) +- *type = REG_GET(DISPC_CONFIG, 11, 11) >> 11; ++ *type = REG_GET(DISPC_CONFIG, 11, 11); + else if (ch == OMAP_DSS_CHANNEL_DIGIT) +- *type = REG_GET(DISPC_CONFIG, 13, 13) >> 13; ++ *type = REG_GET(DISPC_CONFIG, 13, 13); + else + BUG(); + } +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0031-DSS2-do-bootmem-reserve-for-exclusive-access.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0031-DSS2-do-bootmem-reserve-for-exclusive-access.patch new file mode 100644 index 000000000..ae777ed04 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0031-DSS2-do-bootmem-reserve-for-exclusive-access.patch @@ -0,0 +1,33 @@ +From 30c40f5e6b1794430f678bf23d3319354321cab7 Mon Sep 17 00:00:00 2001 +From: Imre Deak +Date: Tue, 14 Apr 2009 14:50:11 +0200 +Subject: [PATCH] DSS2: do bootmem reserve for exclusive access + +BOOTMEM_DEFAULT would allow multiple reservations for the same location, +we need to reserve the region for our exclusive use. Also check if the +reserve succeeded. + +Signed-off-by: Imre Deak +--- + arch/arm/plat-omap/vram.c | 5 ++++- + 1 files changed, 4 insertions(+), 1 deletions(-) + +diff --git a/arch/arm/plat-omap/vram.c b/arch/arm/plat-omap/vram.c +index f24a110..520f260 100644 +--- a/arch/arm/plat-omap/vram.c ++++ b/arch/arm/plat-omap/vram.c +@@ -524,7 +524,10 @@ void __init omapfb_reserve_sdram(void) + return; + } + +- reserve_bootmem(paddr, size, BOOTMEM_DEFAULT); ++ if (reserve_bootmem(paddr, size, BOOTMEM_EXCLUSIVE) < 0) { ++ pr_err("FB: failed to reserve VRAM\n"); ++ return; ++ } + } else { + if (size > sdram_size) { + printk(KERN_ERR "Illegal SDRAM size for VRAM\n"); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0032-DSS2-Fix-DISPC_VID_FIR-value-for-omap34xx.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0032-DSS2-Fix-DISPC_VID_FIR-value-for-omap34xx.patch new file mode 100644 index 000000000..4959a760b --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0032-DSS2-Fix-DISPC_VID_FIR-value-for-omap34xx.patch @@ -0,0 +1,35 @@ +From ed7a9223f6785be03951c55f3b0695b0d5635c80 Mon Sep 17 00:00:00 2001 +From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= +Date: Thu, 9 Apr 2009 15:04:44 +0200 +Subject: [PATCH] DSS2: Fix DISPC_VID_FIR value for omap34xx +MIME-Version: 1.0 +Content-Type: text/plain; charset=utf-8 +Content-Transfer-Encoding: 8bit + +The msbs of the DISPC_VID_FIR fields were incorrectly masked out on +omap34xx and thus 4:1 downscale did not work correctly. + +Signed-off-by: Ville Syrjälä +--- + drivers/video/omap2/dss/dispc.c | 5 ++++- + 1 files changed, 4 insertions(+), 1 deletions(-) + +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +index 076d3d4..b8a3329 100644 +--- a/drivers/video/omap2/dss/dispc.c ++++ b/drivers/video/omap2/dss/dispc.c +@@ -994,7 +994,10 @@ static void _dispc_set_fir(enum omap_plane plane, int hinc, int vinc) + + BUG_ON(plane == OMAP_DSS_GFX); + +- val = FLD_VAL(vinc, 27, 16) | FLD_VAL(hinc, 11, 0); ++ if (cpu_is_omap24xx()) ++ val = FLD_VAL(vinc, 27, 16) | FLD_VAL(hinc, 11, 0); ++ else ++ val = FLD_VAL(vinc, 28, 16) | FLD_VAL(hinc, 12, 0); + dispc_write_reg(fir_reg[plane-1], val); + } + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0033-DSS2-Prefer-3-tap-filter.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0033-DSS2-Prefer-3-tap-filter.patch new file mode 100644 index 000000000..f643ca64f --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0033-DSS2-Prefer-3-tap-filter.patch @@ -0,0 +1,82 @@ +From 5390230ed12585a79683733209db34e9130b8e3b Mon Sep 17 00:00:00 2001 +From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= +Date: Thu, 9 Apr 2009 15:04:43 +0200 +Subject: [PATCH] DSS2: Prefer 3-tap filter +MIME-Version: 1.0 +Content-Type: text/plain; charset=utf-8 +Content-Transfer-Encoding: 8bit + +The 5-tap filter seems rather unstable. With some scaling settings it +works and with some it doesn't even though the functional clock remains +within the TRM limits. So prefer the 3-tap filter unless the functional +clock required for it is too high. + +Signed-off-by: Ville Syrjälä +--- + drivers/video/omap2/dss/dispc.c | 27 ++++++++++++--------------- + 1 files changed, 12 insertions(+), 15 deletions(-) + +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +index b8a3329..b631dd8 100644 +--- a/drivers/video/omap2/dss/dispc.c ++++ b/drivers/video/omap2/dss/dispc.c +@@ -1405,15 +1405,10 @@ static unsigned long calc_fclk_five_taps(u16 width, u16 height, + } + + static unsigned long calc_fclk(u16 width, u16 height, +- u16 out_width, u16 out_height, +- enum omap_color_mode color_mode, bool five_taps) ++ u16 out_width, u16 out_height) + { + unsigned int hf, vf; + +- if (five_taps) +- return calc_fclk_five_taps(width, height, +- out_width, out_height, color_mode); +- + /* + * FIXME how to determine the 'A' factor + * for the no downscaling case ? +@@ -1494,7 +1489,7 @@ static int _dispc_setup_plane(enum omap_plane plane, + } else { + /* video plane */ + +- unsigned long fclk; ++ unsigned long fclk = 0; + + if (out_width < width / maxdownscale || + out_width > width * 8) +@@ -1530,20 +1525,22 @@ static int _dispc_setup_plane(enum omap_plane plane, + /* Must use 5-tap filter? */ + five_taps = height > out_height * 2; + +- /* Try to use 5-tap filter whenever possible. */ +- if (cpu_is_omap34xx() && !five_taps && +- height > out_height && width <= 1024) { +- fclk = calc_fclk_five_taps(width, height, +- out_width, out_height, color_mode); +- if (fclk <= dispc_fclk_rate()) ++ if (!five_taps) { ++ fclk = calc_fclk(width, height, ++ out_width, out_height); ++ ++ /* Try 5-tap filter if 3-tap fclk is too high */ ++ if (cpu_is_omap34xx() && height > out_height && ++ fclk > dispc_fclk_rate()) + five_taps = true; + } + + if (width > (2048 >> five_taps)) + return -EINVAL; + +- fclk = calc_fclk(width, height, out_width, out_height, +- color_mode, five_taps); ++ if (five_taps) ++ fclk = calc_fclk_five_taps(width, height, ++ out_width, out_height, color_mode); + + DSSDBG("required fclk rate = %lu Hz\n", fclk); + DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate()); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0034-DSS2-VRAM-improve-omap_vram_add_region.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0034-DSS2-VRAM-improve-omap_vram_add_region.patch new file mode 100644 index 000000000..fdfc25fb4 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0034-DSS2-VRAM-improve-omap_vram_add_region.patch @@ -0,0 +1,135 @@ +From 946eb774e95cdc2f2fa5cdc24aa69229f82814b8 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Thu, 16 Apr 2009 17:56:00 +0300 +Subject: [PATCH] DSS2: VRAM: improve omap_vram_add_region() + +Combine postponed and non-posponed versions of omap_vram_add_region. +Make the func non-static, so it can be called from board files. +--- + arch/arm/plat-omap/include/mach/vram.h | 1 + + arch/arm/plat-omap/vram.c | 54 +++++++++++++------------------ + 2 files changed, 24 insertions(+), 31 deletions(-) + +diff --git a/arch/arm/plat-omap/include/mach/vram.h b/arch/arm/plat-omap/include/mach/vram.h +index f176562..8639e08 100644 +--- a/arch/arm/plat-omap/include/mach/vram.h ++++ b/arch/arm/plat-omap/include/mach/vram.h +@@ -24,6 +24,7 @@ + + #include + ++extern int omap_vram_add_region(unsigned long paddr, size_t size); + extern int omap_vram_free(unsigned long paddr, size_t size); + extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr); + extern int omap_vram_reserve(unsigned long paddr, size_t size); +diff --git a/arch/arm/plat-omap/vram.c b/arch/arm/plat-omap/vram.c +index 520f260..8e9fe77 100644 +--- a/arch/arm/plat-omap/vram.c ++++ b/arch/arm/plat-omap/vram.c +@@ -60,6 +60,7 @@ + * time when we cannot yet allocate the region list */ + #define MAX_POSTPONED_REGIONS 10 + ++static bool vram_initialized; + static int postponed_cnt __initdata; + static struct { + unsigned long paddr; +@@ -145,39 +146,32 @@ static void omap_vram_free_allocation(struct vram_alloc *va) + kfree(va); + } + +-static __init int omap_vram_add_region_postponed(unsigned long paddr, +- size_t size) +-{ +- if (postponed_cnt == MAX_POSTPONED_REGIONS) +- return -ENOMEM; +- +- postponed_regions[postponed_cnt].paddr = paddr; +- postponed_regions[postponed_cnt].size = size; +- +- ++postponed_cnt; +- +- return 0; +-} +- +-/* add/remove_region can be exported if there's need to add/remove regions +- * runtime */ +-static int omap_vram_add_region(unsigned long paddr, size_t size) ++int omap_vram_add_region(unsigned long paddr, size_t size) + { + struct vram_region *rm; + unsigned pages; + +- DBG("adding region paddr %08lx size %d\n", +- paddr, size); ++ if (vram_initialized) { ++ DBG("adding region paddr %08lx size %d\n", ++ paddr, size); + +- size &= PAGE_MASK; +- pages = size >> PAGE_SHIFT; ++ size &= PAGE_MASK; ++ pages = size >> PAGE_SHIFT; + +- rm = omap_vram_create_region(paddr, pages); +- if (rm == NULL) +- return -ENOMEM; ++ rm = omap_vram_create_region(paddr, pages); ++ if (rm == NULL) ++ return -ENOMEM; ++ ++ list_add(&rm->list, ®ion_list); ++ } else { ++ if (postponed_cnt == MAX_POSTPONED_REGIONS) ++ return -ENOMEM; + +- list_add(&rm->list, ®ion_list); ++ postponed_regions[postponed_cnt].paddr = paddr; ++ postponed_regions[postponed_cnt].size = size; + ++ ++postponed_cnt; ++ } + return 0; + } + +@@ -438,6 +432,8 @@ static __init int omap_vram_init(void) + { + int i, r; + ++ vram_initialized = 1; ++ + for (i = 0; i < postponed_cnt; i++) + omap_vram_add_region(postponed_regions[i].paddr, + postponed_regions[i].size); +@@ -472,10 +468,6 @@ static void __init omapfb_early_vram(char **p) + omapfb_def_sdram_vram_size = memparse(*p, p); + if (**p == ',') + omapfb_def_sdram_vram_start = simple_strtoul((*p) + 1, p, 16); +- +- printk("omapfb_early_vram, %d, 0x%x\n", +- omapfb_def_sdram_vram_size, +- omapfb_def_sdram_vram_start); + } + __early_param("vram=", omapfb_early_vram); + +@@ -538,7 +530,7 @@ void __init omapfb_reserve_sdram(void) + BUG_ON(paddr & ~PAGE_MASK); + } + +- omap_vram_add_region_postponed(paddr, size); ++ omap_vram_add_region(paddr, size); + + pr_info("Reserving %u bytes SDRAM for VRAM\n", size); + } +@@ -594,7 +586,7 @@ unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart, + reserved = pend_avail - paddr; + size_avail = pend_avail - reserved - pstart_avail; + +- omap_vram_add_region_postponed(paddr, size); ++ omap_vram_add_region(paddr, size); + + if (reserved) + pr_info("Reserving %lu bytes SRAM for VRAM\n", reserved); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0035-DSS2-Added-the-function-pointer-for-getting-default.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0035-DSS2-Added-the-function-pointer-for-getting-default.patch new file mode 100644 index 000000000..b7b395458 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0035-DSS2-Added-the-function-pointer-for-getting-default.patch @@ -0,0 +1,66 @@ +From f825cafd5ee5c600218740507f85594c825b0c00 Mon Sep 17 00:00:00 2001 +From: Hardik Shah +Date: Thu, 16 Apr 2009 18:47:49 +0530 +Subject: [PATCH] DSS2: Added the function pointer for getting default color. + +V4L2 Framework has a CID for getting/setting default color. +So added the function pointer for doing same. +SYSFS based getting the default color will remain same + +Signed-off-by: Hardik Shah +--- + arch/arm/plat-omap/include/mach/display.h | 1 + + drivers/video/omap2/dss/manager.c | 11 +++++++---- + 2 files changed, 8 insertions(+), 4 deletions(-) + +diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h +index b0a6272..073cdda 100644 +--- a/arch/arm/plat-omap/include/mach/display.h ++++ b/arch/arm/plat-omap/include/mach/display.h +@@ -414,6 +414,7 @@ struct omap_overlay_manager { + int (*apply)(struct omap_overlay_manager *mgr); + + void (*set_default_color)(struct omap_overlay_manager *mgr, u32 color); ++ u32 (*get_default_color)(struct omap_overlay_manager *mgr); + void (*set_trans_key)(struct omap_overlay_manager *mgr, + enum omap_dss_color_key_type type, + u32 trans_key); +diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c +index 8ca0bbb..12cf7b0 100644 +--- a/drivers/video/omap2/dss/manager.c ++++ b/drivers/video/omap2/dss/manager.c +@@ -98,10 +98,8 @@ static ssize_t manager_display_store(struct omap_overlay_manager *mgr, const cha + static ssize_t manager_default_color_show(struct omap_overlay_manager *mgr, + char *buf) + { +- u32 default_color; +- +- default_color = dispc_get_default_color(mgr->id); +- return snprintf(buf, PAGE_SIZE, "%d", default_color); ++ return snprintf(buf, PAGE_SIZE, "%d", ++ mgr->get_default_color(mgr)); + } + + static ssize_t manager_default_color_store(struct omap_overlay_manager *mgr, +@@ -470,6 +468,10 @@ static void omap_dss_mgr_enable_trans_key(struct omap_overlay_manager *mgr, + { + dispc_enable_trans_key(mgr->id, enable); + } ++static u32 omap_dss_mgr_get_default_color(struct omap_overlay_manager *mgr) ++{ ++ return dispc_get_default_color(mgr->id); ++} + + static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager) + { +@@ -512,6 +514,7 @@ int dss_init_overlay_managers(struct platform_device *pdev) + mgr->set_default_color = &omap_dss_mgr_set_def_color, + mgr->set_trans_key = &omap_dss_mgr_set_trans_key, + mgr->enable_trans_key = &omap_dss_mgr_enable_trans_key, ++ mgr->get_default_color = &omap_dss_mgr_get_default_color; + mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC, + + dss_overlay_setup_dispc_manager(mgr); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0036-DSS2-Added-support-for-setting-and-querying-alpha-b.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0036-DSS2-Added-support-for-setting-and-querying-alpha-b.patch new file mode 100644 index 000000000..c6e9f16b3 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0036-DSS2-Added-support-for-setting-and-querying-alpha-b.patch @@ -0,0 +1,118 @@ +From 6c56dc10226c84f41917ac2117b0e654fa080d40 Mon Sep 17 00:00:00 2001 +From: Hardik Shah +Date: Thu, 16 Apr 2009 19:00:11 +0530 +Subject: [PATCH] DSS2: Added support for setting and querying alpha blending. + +Signed-off-by: Hardik Shah +--- + arch/arm/plat-omap/include/mach/display.h | 3 +++ + drivers/video/omap2/dss/dispc.c | 26 ++++++++++++++++++++++++++ + drivers/video/omap2/dss/dss.h | 2 ++ + drivers/video/omap2/dss/manager.c | 14 ++++++++++++++ + 4 files changed, 45 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h +index 073cdda..e1f615a 100644 +--- a/arch/arm/plat-omap/include/mach/display.h ++++ b/arch/arm/plat-omap/include/mach/display.h +@@ -415,11 +415,14 @@ struct omap_overlay_manager { + + void (*set_default_color)(struct omap_overlay_manager *mgr, u32 color); + u32 (*get_default_color)(struct omap_overlay_manager *mgr); ++ bool (*get_alpha_blending_status)(struct omap_overlay_manager *mgr); + void (*set_trans_key)(struct omap_overlay_manager *mgr, + enum omap_dss_color_key_type type, + u32 trans_key); + void (*enable_trans_key)(struct omap_overlay_manager *mgr, + bool enable); ++ void (*enable_alpha_blending)(struct omap_overlay_manager *mgr, ++ bool enable); + }; + + enum omap_display_caps { +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +index b631dd8..7e551c2 100644 +--- a/drivers/video/omap2/dss/dispc.c ++++ b/drivers/video/omap2/dss/dispc.c +@@ -1847,6 +1847,32 @@ void dispc_enable_trans_key(enum omap_channel ch, bool enable) + REG_FLD_MOD(DISPC_CONFIG, enable, 12, 12); + enable_clocks(0); + } ++void dispc_enable_alpha_blending(enum omap_channel ch, bool enable) ++{ ++ enable_clocks(1); ++ if (ch == OMAP_DSS_CHANNEL_LCD) ++ REG_FLD_MOD(DISPC_CONFIG, enable, 18, 18); ++ else /* OMAP_DSS_CHANNEL_DIGIT */ ++ REG_FLD_MOD(DISPC_CONFIG, enable, 19, 19); ++ enable_clocks(0); ++} ++bool dispc_alpha_blending_enabled(enum omap_channel ch) ++{ ++ bool enabled; ++ ++ enable_clocks(1); ++ if (ch == OMAP_DSS_CHANNEL_LCD) ++ enabled = REG_GET(DISPC_CONFIG, 18, 18); ++ else if (ch == OMAP_DSS_CHANNEL_DIGIT) ++ enabled = REG_GET(DISPC_CONFIG, 18, 18); ++ else ++ BUG(); ++ enable_clocks(0); ++ ++ return enabled; ++ ++} ++ + + bool dispc_trans_key_enabled(enum omap_channel ch) + { +diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h +index 584dce6..1d01ff6 100644 +--- a/drivers/video/omap2/dss/dss.h ++++ b/drivers/video/omap2/dss/dss.h +@@ -294,7 +294,9 @@ void dispc_get_trans_key(enum omap_channel ch, + enum omap_dss_color_key_type *type, + u32 *trans_key); + void dispc_enable_trans_key(enum omap_channel ch, bool enable); ++void dispc_enable_alpha_blending(enum omap_channel ch, bool enable); + bool dispc_trans_key_enabled(enum omap_channel ch); ++bool dispc_alpha_blending_enabled(enum omap_channel ch); + + void dispc_set_lcd_timings(struct omap_video_timings *timings); + unsigned long dispc_fclk_rate(void); +diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c +index 12cf7b0..90acd28 100644 +--- a/drivers/video/omap2/dss/manager.c ++++ b/drivers/video/omap2/dss/manager.c +@@ -468,6 +468,16 @@ static void omap_dss_mgr_enable_trans_key(struct omap_overlay_manager *mgr, + { + dispc_enable_trans_key(mgr->id, enable); + } ++static void omap_dss_mgr_enable_alpha_blending(struct omap_overlay_manager *mgr, ++ bool enable) ++{ ++ dispc_enable_alpha_blending(mgr->id, enable); ++} ++static bool omap_dss_mgr_get_alpha_blending_status( ++ struct omap_overlay_manager *mgr) ++{ ++ return dispc_alpha_blending_enabled(mgr->id); ++} + static u32 omap_dss_mgr_get_default_color(struct omap_overlay_manager *mgr) + { + return dispc_get_default_color(mgr->id); +@@ -514,6 +524,10 @@ int dss_init_overlay_managers(struct platform_device *pdev) + mgr->set_default_color = &omap_dss_mgr_set_def_color, + mgr->set_trans_key = &omap_dss_mgr_set_trans_key, + mgr->enable_trans_key = &omap_dss_mgr_enable_trans_key, ++ mgr->enable_alpha_blending = ++ &omap_dss_mgr_enable_alpha_blending; ++ mgr->get_alpha_blending_status = ++ omap_dss_mgr_get_alpha_blending_status; + mgr->get_default_color = &omap_dss_mgr_get_default_color; + mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC, + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0037-DSS2-Added-support-for-querying-color-keying.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0037-DSS2-Added-support-for-querying-color-keying.patch new file mode 100644 index 000000000..fc62b0951 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0037-DSS2-Added-support-for-querying-color-keying.patch @@ -0,0 +1,150 @@ +From 2c9edd6af31a812a9487dd8bc12322e105a29f44 Mon Sep 17 00:00:00 2001 +From: Hardik Shah +Date: Fri, 17 Apr 2009 09:42:36 +0530 +Subject: [PATCH] DSS2: Added support for querying color keying. + +V4L2 Framework has a ioctl for getting/setting color keying. +So added the function manager pointers for doing same. + +Modifed the color keying sysfs entries to use manager +function pointer. Earlier they were calling direcly +dispc function to set/enable color keying. + +Some of color-keying function pointers in the overlay_manager +structure re-named to be more specific. + +Signed-off-by: Hardik Shah +--- + arch/arm/plat-omap/include/mach/display.h | 6 ++++- + drivers/video/omap2/dss/manager.c | 36 +++++++++++++++++++++-------- + 2 files changed, 31 insertions(+), 11 deletions(-) + +diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h +index e1f615a..d0b4c83 100644 +--- a/arch/arm/plat-omap/include/mach/display.h ++++ b/arch/arm/plat-omap/include/mach/display.h +@@ -416,7 +416,11 @@ struct omap_overlay_manager { + void (*set_default_color)(struct omap_overlay_manager *mgr, u32 color); + u32 (*get_default_color)(struct omap_overlay_manager *mgr); + bool (*get_alpha_blending_status)(struct omap_overlay_manager *mgr); +- void (*set_trans_key)(struct omap_overlay_manager *mgr, ++ bool (*get_trans_key_status)(struct omap_overlay_manager *mgr); ++ void (*get_trans_key_type_and_value)(struct omap_overlay_manager *mgr, ++ enum omap_dss_color_key_type *type, ++ u32 *trans_key); ++ void (*set_trans_key_type_and_value)(struct omap_overlay_manager *mgr, + enum omap_dss_color_key_type type, + u32 trans_key); + void (*enable_trans_key)(struct omap_overlay_manager *mgr, +diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c +index 90acd28..e0501c4 100644 +--- a/drivers/video/omap2/dss/manager.c ++++ b/drivers/video/omap2/dss/manager.c +@@ -124,7 +124,7 @@ static ssize_t manager_color_key_type_show(struct omap_overlay_manager *mgr, + { + enum omap_dss_color_key_type key_type; + +- dispc_get_trans_key(mgr->id, &key_type, NULL); ++ mgr->get_trans_key_type_and_value(mgr, &key_type, NULL); + BUG_ON(key_type >= ARRAY_SIZE(color_key_type_str)); + + return snprintf(buf, PAGE_SIZE, "%s\n", color_key_type_str[key_type]); +@@ -143,8 +143,8 @@ static ssize_t manager_color_key_type_store(struct omap_overlay_manager *mgr, + } + if (key_type == ARRAY_SIZE(color_key_type_str)) + return -EINVAL; +- dispc_get_trans_key(mgr->id, NULL, &key_value); +- dispc_set_trans_key(mgr->id, key_type, key_value); ++ mgr->get_trans_key_type_and_value(mgr, NULL, &key_value); ++ mgr->set_trans_key_type_and_value(mgr, key_type, key_value); + + return size; + } +@@ -154,7 +154,7 @@ static ssize_t manager_color_key_value_show(struct omap_overlay_manager *mgr, + { + u32 key_value; + +- dispc_get_trans_key(mgr->id, NULL, &key_value); ++ mgr->get_trans_key_type_and_value(mgr, NULL, &key_value); + + return snprintf(buf, PAGE_SIZE, "%d\n", key_value); + } +@@ -167,8 +167,8 @@ static ssize_t manager_color_key_value_store(struct omap_overlay_manager *mgr, + + if (sscanf(buf, "%d", &key_value) != 1) + return -EINVAL; +- dispc_get_trans_key(mgr->id, &key_type, NULL); +- dispc_set_trans_key(mgr->id, key_type, key_value); ++ mgr->get_trans_key_type_and_value(mgr, &key_type, NULL); ++ mgr->set_trans_key_type_and_value(mgr, key_type, key_value); + + return size; + } +@@ -177,7 +177,7 @@ static ssize_t manager_color_key_enabled_show(struct omap_overlay_manager *mgr, + char *buf) + { + return snprintf(buf, PAGE_SIZE, "%d\n", +- dispc_trans_key_enabled(mgr->id)); ++ mgr->get_trans_key_status(mgr)); + } + + static ssize_t manager_color_key_enabled_store(struct omap_overlay_manager *mgr, +@@ -188,7 +188,7 @@ static ssize_t manager_color_key_enabled_store(struct omap_overlay_manager *mgr, + if (sscanf(buf, "%d", &enable) != 1) + return -EINVAL; + +- dispc_enable_trans_key(mgr->id, enable); ++ mgr->enable_trans_key(mgr, enable); + + return size; + } +@@ -456,12 +456,20 @@ static void omap_dss_mgr_set_def_color(struct omap_overlay_manager *mgr, + dispc_set_default_color(mgr->id, color); + } + +-static void omap_dss_mgr_set_trans_key(struct omap_overlay_manager *mgr, ++static void omap_dss_mgr_set_trans_key_type_and_value( ++ struct omap_overlay_manager *mgr, + enum omap_dss_color_key_type type, + u32 trans_key) + { + dispc_set_trans_key(mgr->id, type, trans_key); + } ++static void omap_dss_mgr_get_trans_key_type_and_value( ++ struct omap_overlay_manager *mgr, ++ enum omap_dss_color_key_type *type, ++ u32 *trans_key) ++{ ++ dispc_get_trans_key(mgr->id, type, trans_key); ++} + + static void omap_dss_mgr_enable_trans_key(struct omap_overlay_manager *mgr, + bool enable) +@@ -482,6 +490,10 @@ static u32 omap_dss_mgr_get_default_color(struct omap_overlay_manager *mgr) + { + return dispc_get_default_color(mgr->id); + } ++static bool omap_dss_mgr_get_trans_key_status(struct omap_overlay_manager *mgr) ++{ ++ return dispc_trans_key_enabled(mgr->id); ++} + + static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager) + { +@@ -522,8 +534,12 @@ int dss_init_overlay_managers(struct platform_device *pdev) + mgr->unset_display = &omap_dss_unset_display, + mgr->apply = &omap_dss_mgr_apply, + mgr->set_default_color = &omap_dss_mgr_set_def_color, +- mgr->set_trans_key = &omap_dss_mgr_set_trans_key, ++ mgr->set_trans_key_type_and_value = ++ &omap_dss_mgr_set_trans_key_type_and_value, ++ mgr->get_trans_key_type_and_value = ++ &omap_dss_mgr_get_trans_key_type_and_value, + mgr->enable_trans_key = &omap_dss_mgr_enable_trans_key, ++ mgr->get_trans_key_status = &omap_dss_mgr_get_trans_key_status, + mgr->enable_alpha_blending = + &omap_dss_mgr_enable_alpha_blending; + mgr->get_alpha_blending_status = +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0038-DSS2-OMAPFB-Some-color-keying-pointerd-renamed-in-D.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0038-DSS2-OMAPFB-Some-color-keying-pointerd-renamed-in-D.patch new file mode 100644 index 000000000..65cb11357 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0038-DSS2-OMAPFB-Some-color-keying-pointerd-renamed-in-D.patch @@ -0,0 +1,56 @@ +From 9e8877f0e5b17d3ddd101d6a63aa86fdb14d35d5 Mon Sep 17 00:00:00 2001 +From: Hardik Shah +Date: Fri, 17 Apr 2009 09:51:25 +0530 +Subject: [PATCH] DSS2:OMAPFB: Some color keying pointerd renamed in DSS2. Replicated in FB + +Signed-off-by: Hardik Shah +--- + drivers/video/omap2/omapfb/omapfb-ioctl.c | 11 +++++++---- + 1 files changed, 7 insertions(+), 4 deletions(-) + +diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c +index 7f18d2a..79d8916 100644 +--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c ++++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c +@@ -288,7 +288,8 @@ static int _omapfb_set_color_key(struct omap_overlay_manager *mgr, + { + enum omap_dss_color_key_type kt; + +- if(!mgr->set_default_color || !mgr->set_trans_key || ++ if (!mgr->set_default_color || ++ !mgr->set_trans_key_type_and_value || + !mgr->enable_trans_key) + return 0; + +@@ -310,7 +311,7 @@ static int _omapfb_set_color_key(struct omap_overlay_manager *mgr, + } + + mgr->set_default_color(mgr, ck->background); +- mgr->set_trans_key(mgr, kt, ck->trans_key); ++ mgr->set_trans_key_type_and_value(mgr, kt, ck->trans_key); + mgr->enable_trans_key(mgr, 1); + + omapfb_color_keys[mgr->id] = *ck; +@@ -341,7 +342,8 @@ static int omapfb_set_color_key(struct fb_info *fbi, + goto err; + } + +- if(!mgr->set_default_color || !mgr->set_trans_key || ++ if (!mgr->set_default_color || ++ !mgr->set_trans_key_type_and_value || + !mgr->enable_trans_key) { + r = -ENODEV; + goto err; +@@ -377,7 +379,8 @@ static int omapfb_get_color_key(struct fb_info *fbi, + goto err; + } + +- if(!mgr->set_default_color || !mgr->set_trans_key || ++ if (!mgr->set_default_color || ++ !mgr->set_trans_key_type_and_value || + !mgr->enable_trans_key) { + r = -ENODEV; + goto err; +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0039-DSS2-Add-sysfs-entry-to-for-the-alpha-blending-supp.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0039-DSS2-Add-sysfs-entry-to-for-the-alpha-blending-supp.patch new file mode 100644 index 000000000..af8c2cd09 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0039-DSS2-Add-sysfs-entry-to-for-the-alpha-blending-supp.patch @@ -0,0 +1,59 @@ +From 6f1f0c7b19ecb468824b79f9d181ef0da41b7d7d Mon Sep 17 00:00:00 2001 +From: Hardik Shah +Date: Fri, 17 Apr 2009 13:58:21 +0530 +Subject: [PATCH] DSS2: Add sysfs entry to for the alpha blending support. + +Signed-off-by: Hardik Shah +--- + drivers/video/omap2/dss/manager.c | 21 +++++++++++++++++++++ + 1 files changed, 21 insertions(+), 0 deletions(-) + +diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c +index e0501c4..7965a84 100644 +--- a/drivers/video/omap2/dss/manager.c ++++ b/drivers/video/omap2/dss/manager.c +@@ -192,6 +192,22 @@ static ssize_t manager_color_key_enabled_store(struct omap_overlay_manager *mgr, + + return size; + } ++static ssize_t manager_alpha_blending_enabled_show( ++ struct omap_overlay_manager *mgr, char *buf) ++{ ++ return snprintf(buf, PAGE_SIZE, "%d\n", ++ mgr->get_alpha_blending_status(mgr)); ++} ++static ssize_t manager_alpha_blending_enabled_store( ++ struct omap_overlay_manager *mgr, ++ const char *buf, size_t size) ++{ ++ int enable; ++ if (sscanf(buf, "%d", &enable) != 1) ++ return -EINVAL; ++ mgr->enable_alpha_blending(mgr, enable); ++ return size; ++} + + + struct manager_attribute { +@@ -215,6 +231,10 @@ static MANAGER_ATTR(color_key_value, S_IRUGO|S_IWUSR, + manager_color_key_value_show, manager_color_key_value_store); + static MANAGER_ATTR(color_key_enabled, S_IRUGO|S_IWUSR, + manager_color_key_enabled_show, manager_color_key_enabled_store); ++static MANAGER_ATTR(alpha_blending_enabled, S_IRUGO|S_IWUSR, ++ manager_alpha_blending_enabled_show, ++ manager_alpha_blending_enabled_store); ++ + + static struct attribute *manager_sysfs_attrs[] = { + &manager_attr_name.attr, +@@ -223,6 +243,7 @@ static struct attribute *manager_sysfs_attrs[] = { + &manager_attr_color_key_type.attr, + &manager_attr_color_key_value.attr, + &manager_attr_color_key_enabled.attr, ++ &manager_attr_alpha_blending_enabled.attr, + NULL + }; + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0040-DSS2-Provided-proper-exclusion-for-destination-colo.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0040-DSS2-Provided-proper-exclusion-for-destination-colo.patch new file mode 100644 index 000000000..66be75f3f --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0040-DSS2-Provided-proper-exclusion-for-destination-colo.patch @@ -0,0 +1,97 @@ +From a5129f272a48aa22629137c9c31e60eddb8c3f5d Mon Sep 17 00:00:00 2001 +From: Hardik Shah +Date: Fri, 17 Apr 2009 14:24:46 +0530 +Subject: [PATCH] DSS2: Provided proper exclusion for destination color keying and alpha blending. + +OMAP does not support destination color key and alpha blending +simultaneously. So this patch does not allow the user +so set both at a time. + +Signed-off-by: Hardik Shah +--- + drivers/video/omap2/dss/manager.c | 50 ++++++++++++++++++++++++++++++++++++- + 1 files changed, 49 insertions(+), 1 deletions(-) + +diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c +index 7965a84..108489c 100644 +--- a/drivers/video/omap2/dss/manager.c ++++ b/drivers/video/omap2/dss/manager.c +@@ -137,12 +137,26 @@ static ssize_t manager_color_key_type_store(struct omap_overlay_manager *mgr, + u32 key_value; + + for (key_type = OMAP_DSS_COLOR_KEY_GFX_DST; +- key_type < ARRAY_SIZE(color_key_type_str); key_type++) { ++ key_type < ARRAY_SIZE(color_key_type_str); key_type++) { + if (sysfs_streq(buf, color_key_type_str[key_type])) + break; + } + if (key_type == ARRAY_SIZE(color_key_type_str)) + return -EINVAL; ++ /* OMAP does not support destination color key and alpha blending ++ * simultaneously. So if alpha blending and color keying both are ++ * enabled then refrain from setting the color key type to ++ * gfx-destination ++ */ ++ if (!key_type) { ++ bool color_key_enabled; ++ bool alpha_blending_enabled; ++ color_key_enabled = mgr->get_trans_key_status(mgr); ++ alpha_blending_enabled = mgr->get_alpha_blending_status(mgr); ++ if (color_key_enabled && alpha_blending_enabled) ++ return -EINVAL; ++ } ++ + mgr->get_trans_key_type_and_value(mgr, NULL, &key_value); + mgr->set_trans_key_type_and_value(mgr, key_type, key_value); + +@@ -188,6 +202,23 @@ static ssize_t manager_color_key_enabled_store(struct omap_overlay_manager *mgr, + if (sscanf(buf, "%d", &enable) != 1) + return -EINVAL; + ++ /* OMAP does not support destination color keying and ++ * alpha blending simultaneously. so if alpha blending ++ * is enabled refrain from enabling destination color ++ * keying. ++ */ ++ if (enable) { ++ bool enabled; ++ enabled = mgr->get_alpha_blending_status(mgr); ++ if (enabled) { ++ enum omap_dss_color_key_type key_type; ++ mgr->get_trans_key_type_and_value(mgr, ++ &key_type, NULL); ++ if (!key_type) ++ return -EINVAL; ++ } ++ ++ } + mgr->enable_trans_key(mgr, enable); + + return size; +@@ -205,6 +236,23 @@ static ssize_t manager_alpha_blending_enabled_store( + int enable; + if (sscanf(buf, "%d", &enable) != 1) + return -EINVAL; ++ /* OMAP does not support destination color keying and ++ * alpha blending simultaneously. so if destination ++ * color keying is enabled refrain from enabling ++ * alpha blending ++ */ ++ if (enable) { ++ bool enabled; ++ enabled = mgr->get_trans_key_status(mgr); ++ if (enabled) { ++ enum omap_dss_color_key_type key_type; ++ mgr->get_trans_key_type_and_value(mgr, &key_type, NULL); ++ if (!key_type) ++ return -EINVAL; ++ ++ } ++ ++ } + mgr->enable_alpha_blending(mgr, enable); + return size; + } +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0041-DSS2-Disable-vertical-offset-with-fieldmode.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0041-DSS2-Disable-vertical-offset-with-fieldmode.patch new file mode 100644 index 000000000..6785ade27 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0041-DSS2-Disable-vertical-offset-with-fieldmode.patch @@ -0,0 +1,71 @@ +From 9bcac9b9e678f476c83b5679b1215b6bc946130a Mon Sep 17 00:00:00 2001 +From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= +Date: Mon, 20 Apr 2009 16:26:18 +0200 +Subject: [PATCH] DSS2: Disable vertical offset with fieldmode +MIME-Version: 1.0 +Content-Type: text/plain; charset=utf-8 +Content-Transfer-Encoding: 8bit + +When using fieldmode each field is basically a separate picture so the +vertical filter should start at phase 0 for both fields. + +Signed-off-by: Ville Syrjälä +--- + drivers/video/omap2/dss/dispc.c | 23 +++++++++-------------- + 1 files changed, 9 insertions(+), 14 deletions(-) + +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +index 7e551c2..f15614b 100644 +--- a/drivers/video/omap2/dss/dispc.c ++++ b/drivers/video/omap2/dss/dispc.c +@@ -1029,12 +1029,12 @@ static void _dispc_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu) + static void _dispc_set_scaling(enum omap_plane plane, + u16 orig_width, u16 orig_height, + u16 out_width, u16 out_height, +- bool ilace, bool five_taps) ++ bool ilace, bool five_taps, ++ bool fieldmode) + { + int fir_hinc; + int fir_vinc; + int hscaleup, vscaleup; +- int fieldmode = 0; + int accu0 = 0; + int accu1 = 0; + u32 l; +@@ -1072,17 +1072,12 @@ static void _dispc_set_scaling(enum omap_plane plane, + + dispc_write_reg(dispc_reg_att[plane], l); + +- if (ilace) { +- if (fieldmode) { +- accu0 = fir_vinc / 2; +- accu1 = 0; +- } else { +- accu0 = 0; +- accu1 = fir_vinc / 2; +- if (accu1 >= 1024/2) { +- accu0 = 1024/2; +- accu1 -= accu0; +- } ++ if (ilace && !fieldmode) { ++ accu0 = 0; ++ accu1 = fir_vinc / 2; ++ if (accu1 >= 1024/2) { ++ accu0 = 1024/2; ++ accu1 -= accu0; + } + } + +@@ -1582,7 +1577,7 @@ static int _dispc_setup_plane(enum omap_plane plane, + if (plane != OMAP_DSS_GFX) { + _dispc_set_scaling(plane, width, height, + out_width, out_height, +- ilace, five_taps); ++ ilace, five_taps, fieldmode); + _dispc_set_vid_size(plane, out_width, out_height); + _dispc_set_vid_color_conv(plane, cconv); + } +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0042-DSS2-Don-t-enable-fieldmode-automatically.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0042-DSS2-Don-t-enable-fieldmode-automatically.patch new file mode 100644 index 000000000..5264911b4 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0042-DSS2-Don-t-enable-fieldmode-automatically.patch @@ -0,0 +1,34 @@ +From 9c6de0fed6e8a598d026d348533fdf731b737d55 Mon Sep 17 00:00:00 2001 +From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= +Date: Mon, 20 Apr 2009 16:26:19 +0200 +Subject: [PATCH] DSS2: Don't enable fieldmode automatically +MIME-Version: 1.0 +Content-Type: text/plain; charset=utf-8 +Content-Transfer-Encoding: 8bit + +The only case where enabling fieldmode automatically seems reasonable +is when source and destination heights are equal. Some kind of user +controllable knob should be added so the user could enable field mode +when the source is interlaced. + +Signed-off-by: Ville Syrjälä +--- + drivers/video/omap2/dss/dispc.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +index f15614b..1c036c1 100644 +--- a/drivers/video/omap2/dss/dispc.c ++++ b/drivers/video/omap2/dss/dispc.c +@@ -1450,7 +1450,7 @@ static int _dispc_setup_plane(enum omap_plane plane, + if (paddr == 0) + return -EINVAL; + +- if (ilace && height >= out_height) ++ if (ilace && height == out_height) + fieldmode = 1; + + if (ilace) { +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0043-DSS2-Swap-field-0-and-field-1-registers.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0043-DSS2-Swap-field-0-and-field-1-registers.patch new file mode 100644 index 000000000..76e37817c --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0043-DSS2-Swap-field-0-and-field-1-registers.patch @@ -0,0 +1,170 @@ +From 35e88797e93b107ba602dee1e2ac8ea761dccd4b Mon Sep 17 00:00:00 2001 +From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= +Date: Mon, 20 Apr 2009 16:26:20 +0200 +Subject: [PATCH] DSS2: Swap field 0 and field 1 registers +MIME-Version: 1.0 +Content-Type: text/plain; charset=utf-8 +Content-Transfer-Encoding: 8bit + +The values for the registers which have alternate values for each field +were reveresed to what the hardware expects. For the hardware field 0 +is the even field or the bottom field, field 1 is the odd field or the +top field. So simply swap the register values. + +Signed-off-by: Ville Syrjälä +--- + drivers/video/omap2/dss/dispc.c | 66 ++++++++++++++++++++++----------------- + 1 files changed, 37 insertions(+), 29 deletions(-) + +diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c +index 1c036c1..9bab6cf 100644 +--- a/drivers/video/omap2/dss/dispc.c ++++ b/drivers/video/omap2/dss/dispc.c +@@ -1072,12 +1072,16 @@ static void _dispc_set_scaling(enum omap_plane plane, + + dispc_write_reg(dispc_reg_att[plane], l); + ++ /* ++ * field 0 = even field = bottom field ++ * field 1 = odd field = top field ++ */ + if (ilace && !fieldmode) { +- accu0 = 0; +- accu1 = fir_vinc / 2; +- if (accu1 >= 1024/2) { +- accu0 = 1024/2; +- accu1 -= accu0; ++ accu1 = 0; ++ accu0 = fir_vinc / 2; ++ if (accu0 >= 1024/2) { ++ accu1 = 1024/2; ++ accu0 -= accu1; + } + } + +@@ -1266,34 +1270,38 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror, + fbh = width; + } + ++ /* ++ * field 0 = even field = bottom field ++ * field 1 = odd field = top field ++ */ + switch (rotation + mirror * 4) { + case 0: +- *offset0 = 0; ++ *offset1 = 0; + if (fieldmode) +- *offset1 = screen_width * ps; ++ *offset0 = screen_width * ps; + else +- *offset1 = 0; ++ *offset0 = 0; + *row_inc = pixinc(1 + (screen_width - fbw) + + (fieldmode ? screen_width : 0), + ps); + *pix_inc = pixinc(1, ps); + break; + case 1: +- *offset0 = screen_width * (fbh - 1) * ps; ++ *offset1 = screen_width * (fbh - 1) * ps; + if (fieldmode) +- *offset1 = *offset0 + ps; ++ *offset0 = *offset1 + ps; + else +- *offset1 = *offset0; ++ *offset0 = *offset1; + *row_inc = pixinc(screen_width * (fbh - 1) + 1 + + (fieldmode ? 1 : 0), ps); + *pix_inc = pixinc(-screen_width, ps); + break; + case 2: +- *offset0 = (screen_width * (fbh - 1) + fbw - 1) * ps; ++ *offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps; + if (fieldmode) +- *offset1 = *offset0 - screen_width * ps; ++ *offset0 = *offset1 - screen_width * ps; + else +- *offset1 = *offset0; ++ *offset0 = *offset1; + *row_inc = pixinc(-1 - + (screen_width - fbw) - + (fieldmode ? screen_width : 0), +@@ -1301,11 +1309,11 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror, + *pix_inc = pixinc(-1, ps); + break; + case 3: +- *offset0 = (fbw - 1) * ps; ++ *offset1 = (fbw - 1) * ps; + if (fieldmode) +- *offset1 = *offset0 - ps; ++ *offset0 = *offset1 - ps; + else +- *offset1 = *offset0; ++ *offset0 = *offset1; + *row_inc = pixinc(-screen_width * (fbh - 1) - 1 - + (fieldmode ? 1 : 0), ps); + *pix_inc = pixinc(screen_width, ps); +@@ -1313,11 +1321,11 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror, + + /* mirroring */ + case 0 + 4: +- *offset0 = (fbw - 1) * ps; ++ *offset1 = (fbw - 1) * ps; + if (fieldmode) +- *offset1 = *offset0 + screen_width * ps; ++ *offset0 = *offset1 + screen_width * ps; + else +- *offset1 = *offset0; ++ *offset0 = *offset1; + *row_inc = pixinc(screen_width * 2 - 1 + + (fieldmode ? screen_width : 0), + ps); +@@ -1325,11 +1333,11 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror, + break; + + case 1 + 4: +- *offset0 = 0; ++ *offset1 = 0; + if (fieldmode) +- *offset1 = *offset0 + screen_width * ps; ++ *offset0 = *offset1 + screen_width * ps; + else +- *offset1 = *offset0; ++ *offset0 = *offset1; + *row_inc = pixinc(-screen_width * (fbh - 1) + 1 + + (fieldmode ? 1 : 0), + ps); +@@ -1337,11 +1345,11 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror, + break; + + case 2 + 4: +- *offset0 = screen_width * (fbh - 1) * ps; ++ *offset1 = screen_width * (fbh - 1) * ps; + if (fieldmode) +- *offset1 = *offset0 + screen_width * ps; ++ *offset0 = *offset1 + screen_width * ps; + else +- *offset1 = *offset0; ++ *offset0 = *offset1; + *row_inc = pixinc(1 - screen_width * 2 - + (fieldmode ? screen_width : 0), + ps); +@@ -1349,11 +1357,11 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror, + break; + + case 3 + 4: +- *offset0 = (screen_width * (fbh - 1) + fbw - 1) * ps; ++ *offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps; + if (fieldmode) +- *offset1 = *offset0 + screen_width * ps; ++ *offset0 = *offset1 + screen_width * ps; + else +- *offset1 = *offset0; ++ *offset0 = *offset1; + *row_inc = pixinc(screen_width * (fbh - 1) - 1 - + (fieldmode ? 1 : 0), + ps); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0044-DSS2-add-sysfs-entry-for-seting-the-rotate-type.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0044-DSS2-add-sysfs-entry-for-seting-the-rotate-type.patch new file mode 100644 index 000000000..32def9e8d --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0044-DSS2-add-sysfs-entry-for-seting-the-rotate-type.patch @@ -0,0 +1,76 @@ +From a9b3500bd14609750a2337e866e1df62627c1bac Mon Sep 17 00:00:00 2001 +From: Imre Deak +Date: Mon, 20 Apr 2009 14:55:33 +0200 +Subject: [PATCH] DSS2: add sysfs entry for seting the rotate type + +This can help in utilizing VRAM memory better. Since with VRFB rotation +we waste a lot of physical memory due to the VRFB HW design, provide the +possibility to turn it off and free the extra memory for the use by other +planes for example. +--- + drivers/video/omap2/omapfb/omapfb-sysfs.c | 42 ++++++++++++++++++++++++++++- + 1 files changed, 41 insertions(+), 1 deletions(-) + +diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c +index 2c88718..4e3da42 100644 +--- a/drivers/video/omap2/omapfb/omapfb-sysfs.c ++++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c +@@ -43,6 +43,46 @@ static ssize_t show_rotate_type(struct device *dev, + return snprintf(buf, PAGE_SIZE, "%d\n", ofbi->rotation_type); + } + ++static ssize_t store_rotate_type(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct fb_info *fbi = dev_get_drvdata(dev); ++ struct omapfb_info *ofbi = FB2OFB(fbi); ++ struct omapfb2_device *fbdev = ofbi->fbdev; ++ enum omap_dss_rotation_type rot_type; ++ int r; ++ ++ rot_type = simple_strtoul(buf, NULL, 0); ++ ++ if (rot_type != OMAP_DSS_ROT_DMA && rot_type != OMAP_DSS_ROT_VRFB) ++ return -EINVAL; ++ ++ omapfb_lock(fbdev); ++ ++ r = 0; ++ if (rot_type == ofbi->rotation_type) ++ goto out; ++ ++ r = -EBUSY; ++ if (ofbi->region.size) ++ goto out; ++ ++ ofbi->rotation_type = rot_type; ++ ++ /* ++ * Since the VRAM for this FB is not allocated at the moment we don't need to ++ * do any further parameter checking at this point. ++ */ ++ ++ r = count; ++out: ++ omapfb_unlock(fbdev); ++ ++ return r; ++} ++ ++ + static ssize_t show_mirror(struct device *dev, + struct device_attribute *attr, char *buf) + { +@@ -327,7 +367,7 @@ static ssize_t show_virt(struct device *dev, + } + + static struct device_attribute omapfb_attrs[] = { +- __ATTR(rotate_type, S_IRUGO, show_rotate_type, NULL), ++ __ATTR(rotate_type, S_IRUGO | S_IWUSR, show_rotate_type, store_rotate_type), + __ATTR(mirror, S_IRUGO | S_IWUSR, show_mirror, store_mirror), + __ATTR(size, S_IRUGO | S_IWUSR, show_size, store_size), + __ATTR(overlays, S_IRUGO | S_IWUSR, show_overlays, store_overlays), +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0045-DSS2-Fixed-line-endings-from-to.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0045-DSS2-Fixed-line-endings-from-to.patch new file mode 100644 index 000000000..938246985 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0045-DSS2-Fixed-line-endings-from-to.patch @@ -0,0 +1,48 @@ +From b0e081456a9b094109c04467d041ff693843ca47 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Tue, 21 Apr 2009 09:25:16 +0300 +Subject: [PATCH] DSS2: Fixed line endings from , to ; + +--- + drivers/video/omap2/dss/manager.c | 18 +++++++++--------- + 1 files changed, 9 insertions(+), 9 deletions(-) + +diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c +index 108489c..bf059e0 100644 +--- a/drivers/video/omap2/dss/manager.c ++++ b/drivers/video/omap2/dss/manager.c +@@ -599,22 +599,22 @@ int dss_init_overlay_managers(struct platform_device *pdev) + break; + } + +- mgr->set_display = &omap_dss_set_display, +- mgr->unset_display = &omap_dss_unset_display, +- mgr->apply = &omap_dss_mgr_apply, +- mgr->set_default_color = &omap_dss_mgr_set_def_color, ++ mgr->set_display = &omap_dss_set_display; ++ mgr->unset_display = &omap_dss_unset_display; ++ mgr->apply = &omap_dss_mgr_apply; ++ mgr->set_default_color = &omap_dss_mgr_set_def_color; + mgr->set_trans_key_type_and_value = +- &omap_dss_mgr_set_trans_key_type_and_value, ++ &omap_dss_mgr_set_trans_key_type_and_value; + mgr->get_trans_key_type_and_value = +- &omap_dss_mgr_get_trans_key_type_and_value, +- mgr->enable_trans_key = &omap_dss_mgr_enable_trans_key, +- mgr->get_trans_key_status = &omap_dss_mgr_get_trans_key_status, ++ &omap_dss_mgr_get_trans_key_type_and_value; ++ mgr->enable_trans_key = &omap_dss_mgr_enable_trans_key; ++ mgr->get_trans_key_status = &omap_dss_mgr_get_trans_key_status; + mgr->enable_alpha_blending = + &omap_dss_mgr_enable_alpha_blending; + mgr->get_alpha_blending_status = + omap_dss_mgr_get_alpha_blending_status; + mgr->get_default_color = &omap_dss_mgr_get_default_color; +- mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC, ++ mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC; + + dss_overlay_setup_dispc_manager(mgr); + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0046-DSS2-DSI-decrease-sync-timeout-from-60s-to-2s.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0046-DSS2-DSI-decrease-sync-timeout-from-60s-to-2s.patch new file mode 100644 index 000000000..4ae5fbdd9 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0046-DSS2-DSI-decrease-sync-timeout-from-60s-to-2s.patch @@ -0,0 +1,26 @@ +From 0f88992b2681aed4f31dc7dd3926b357bbc95154 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Tue, 21 Apr 2009 10:11:55 +0300 +Subject: [PATCH] DSS2: DSI: decrease sync timeout from 60s to 2s + +The framedone-problem should be ok now, so we shouldn't get long waits. +--- + drivers/video/omap2/dss/dsi.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c +index 50af925..d59ad38 100644 +--- a/drivers/video/omap2/dss/dsi.c ++++ b/drivers/video/omap2/dss/dsi.c +@@ -3216,7 +3216,7 @@ static void dsi_push_set_mirror(struct omap_display *display, int mirror) + + static int dsi_wait_sync(struct omap_display *display) + { +- long wait = msecs_to_jiffies(60000); ++ long wait = msecs_to_jiffies(2000); + struct completion compl; + + DSSDBGF(""); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0047-DSS2-fix-return-value-for-rotate_type-sysfs-functio.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0047-DSS2-fix-return-value-for-rotate_type-sysfs-functio.patch new file mode 100644 index 000000000..0b0f104b3 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0047-DSS2-fix-return-value-for-rotate_type-sysfs-functio.patch @@ -0,0 +1,44 @@ +From 7ddd5eaa7bc345c3719d613a46a95b7e8052ad2c Mon Sep 17 00:00:00 2001 +From: Imre Deak +Date: Tue, 21 Apr 2009 15:18:36 +0200 +Subject: [PATCH] DSS2: fix return value for rotate_type sysfs function + +Signed-off-by: Imre Deak +--- + drivers/video/omap2/omapfb/omapfb-sysfs.c | 9 ++++----- + 1 files changed, 4 insertions(+), 5 deletions(-) + +diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c +index 4e3da42..13028ae 100644 +--- a/drivers/video/omap2/omapfb/omapfb-sysfs.c ++++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c +@@ -64,9 +64,10 @@ static ssize_t store_rotate_type(struct device *dev, + if (rot_type == ofbi->rotation_type) + goto out; + +- r = -EBUSY; +- if (ofbi->region.size) ++ if (ofbi->region.size) { ++ r = -EBUSY; + goto out; ++ } + + ofbi->rotation_type = rot_type; + +@@ -74,12 +75,10 @@ static ssize_t store_rotate_type(struct device *dev, + * Since the VRAM for this FB is not allocated at the moment we don't need to + * do any further parameter checking at this point. + */ +- +- r = count; + out: + omapfb_unlock(fbdev); + +- return r; ++ return r ? r : count; + } + + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0048-OMAP2-3-DMA-implement-trans-copy-and-const-fill.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0048-OMAP2-3-DMA-implement-trans-copy-and-const-fill.patch new file mode 100644 index 000000000..cc6663fa2 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0048-OMAP2-3-DMA-implement-trans-copy-and-const-fill.patch @@ -0,0 +1,123 @@ +From e34564db95627ad20e918b240c45e2bd5555f7e8 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Wed, 22 Apr 2009 10:06:08 +0300 +Subject: [PATCH] OMAP2/3: DMA: implement trans copy and const fill + +Implement transparent copy and constant fill features for OMAP2/3. + +Signed-off-by: Tomi Valkeinen +--- + arch/arm/plat-omap/dma.c | 81 +++++++++++++++++++++------------ + arch/arm/plat-omap/include/mach/dma.h | 1 + + 2 files changed, 52 insertions(+), 30 deletions(-) + +diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c +index 3fd0e77..060ac71 100755 +--- a/arch/arm/plat-omap/dma.c ++++ b/arch/arm/plat-omap/dma.c +@@ -310,41 +310,62 @@ EXPORT_SYMBOL(omap_set_dma_transfer_params); + + void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) + { +- u16 w; +- + BUG_ON(omap_dma_in_1510_mode()); + +- if (cpu_class_is_omap2()) { +- REVISIT_24XX(); +- return; +- } ++ if (cpu_class_is_omap1()) { ++ u16 w; + +- w = dma_read(CCR2(lch)); +- w &= ~0x03; ++ w = dma_read(CCR2(lch)); ++ w &= ~0x03; + +- switch (mode) { +- case OMAP_DMA_CONSTANT_FILL: +- w |= 0x01; +- break; +- case OMAP_DMA_TRANSPARENT_COPY: +- w |= 0x02; +- break; +- case OMAP_DMA_COLOR_DIS: +- break; +- default: +- BUG(); ++ switch (mode) { ++ case OMAP_DMA_CONSTANT_FILL: ++ w |= 0x01; ++ break; ++ case OMAP_DMA_TRANSPARENT_COPY: ++ w |= 0x02; ++ break; ++ case OMAP_DMA_COLOR_DIS: ++ break; ++ default: ++ BUG(); ++ } ++ dma_write(w, CCR2(lch)); ++ ++ w = dma_read(LCH_CTRL(lch)); ++ w &= ~0x0f; ++ /* Default is channel type 2D */ ++ if (mode) { ++ dma_write((u16)color, COLOR_L(lch)); ++ dma_write((u16)(color >> 16), COLOR_U(lch)); ++ w |= 1; /* Channel type G */ ++ } ++ dma_write(w, LCH_CTRL(lch)); + } +- dma_write(w, CCR2(lch)); + +- w = dma_read(LCH_CTRL(lch)); +- w &= ~0x0f; +- /* Default is channel type 2D */ +- if (mode) { +- dma_write((u16)color, COLOR_L(lch)); +- dma_write((u16)(color >> 16), COLOR_U(lch)); +- w |= 1; /* Channel type G */ ++ if (cpu_class_is_omap2()) { ++ u32 val; ++ ++ val = dma_read(CCR(lch)); ++ val &= ~((1 << 17) | (1 << 16)); ++ ++ switch (mode) { ++ case OMAP_DMA_CONSTANT_FILL: ++ val |= 1 << 16; ++ break; ++ case OMAP_DMA_TRANSPARENT_COPY: ++ val |= 1 << 17; ++ break; ++ case OMAP_DMA_COLOR_DIS: ++ break; ++ default: ++ BUG(); ++ } ++ dma_write(val, CCR(lch)); ++ ++ color &= 0xffffff; ++ dma_write(color, COLOR(lch)); + } +- dma_write(w, LCH_CTRL(lch)); + } + EXPORT_SYMBOL(omap_set_dma_color_mode); + +diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h +index 224b077..4e34f47 100644 +--- a/arch/arm/plat-omap/include/mach/dma.h ++++ b/arch/arm/plat-omap/include/mach/dma.h +@@ -144,6 +144,7 @@ + #define OMAP_DMA4_CSSA_U(n) 0 + #define OMAP_DMA4_CDSA_L(n) 0 + #define OMAP_DMA4_CDSA_U(n) 0 ++#define OMAP1_DMA_COLOR(n) 0 + + /*----------------------------------------------------------------------------*/ + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0049-DSS2-VRAM-clear-allocated-area-with-DMA.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0049-DSS2-VRAM-clear-allocated-area-with-DMA.patch new file mode 100644 index 000000000..e9fc76ce1 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0049-DSS2-VRAM-clear-allocated-area-with-DMA.patch @@ -0,0 +1,101 @@ +From 02034cc79f69512a6037f03ad1243c28f59fdd8a Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Wed, 22 Apr 2009 10:25:20 +0300 +Subject: [PATCH] DSS2: VRAM: clear allocated area with DMA + +Use DMA constant fill feature to clear VRAM area when +someone allocates it. +--- + arch/arm/plat-omap/vram.c | 57 +++++++++++++++++++++++++++++++++++++++++++++ + 1 files changed, 57 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/plat-omap/vram.c b/arch/arm/plat-omap/vram.c +index 8e9fe77..90276ac 100644 +--- a/arch/arm/plat-omap/vram.c ++++ b/arch/arm/plat-omap/vram.c +@@ -31,11 +31,13 @@ + #include + #include + #include ++#include + + #include + + #include + #include ++#include + + #ifdef DEBUG + #define DBG(format, ...) printk(KERN_DEBUG "VRAM: " format, ## __VA_ARGS__) +@@ -276,6 +278,59 @@ int omap_vram_reserve(unsigned long paddr, size_t size) + } + EXPORT_SYMBOL(omap_vram_reserve); + ++static void _omap_vram_dma_cb(int lch, u16 ch_status, void *data) ++{ ++ struct completion *compl = data; ++ complete(compl); ++} ++ ++static int _omap_vram_clear(u32 paddr, unsigned pages) ++{ ++ struct completion compl; ++ unsigned elem_count; ++ unsigned frame_count; ++ int r; ++ int lch; ++ ++ init_completion(&compl); ++ ++ r = omap_request_dma(OMAP_DMA_NO_DEVICE, "VRAM DMA", ++ _omap_vram_dma_cb, ++ &compl, &lch); ++ if (r) { ++ pr_err("VRAM: request_dma failed for memory clear\n"); ++ return -EBUSY; ++ } ++ ++ elem_count = pages * PAGE_SIZE / 4; ++ frame_count = 1; ++ ++ omap_set_dma_transfer_params(lch, OMAP_DMA_DATA_TYPE_S32, ++ elem_count, frame_count, ++ OMAP_DMA_SYNC_ELEMENT, ++ 0, 0); ++ ++ omap_set_dma_dest_params(lch, 0, OMAP_DMA_AMODE_POST_INC, ++ paddr, 0, 0); ++ ++ omap_set_dma_color_mode(lch, OMAP_DMA_CONSTANT_FILL, 0x000000); ++ ++ omap_start_dma(lch); ++ ++ if (wait_for_completion_timeout(&compl, msecs_to_jiffies(1000)) == 0) { ++ omap_stop_dma(lch); ++ pr_err("VRAM: dma timeout while clearing memory\n"); ++ r = -EIO; ++ goto err; ++ } ++ ++ r = 0; ++err: ++ omap_free_dma(lch); ++ ++ return r; ++} ++ + static int _omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr) + { + struct vram_region *rm; +@@ -313,6 +368,8 @@ found: + + *paddr = start; + ++ _omap_vram_clear(start, pages); ++ + return 0; + } + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0050-DSS2-OMAPFB-remove-fb-clearing-code.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0050-DSS2-OMAPFB-remove-fb-clearing-code.patch new file mode 100644 index 000000000..8c5edd0c3 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0050-DSS2-OMAPFB-remove-fb-clearing-code.patch @@ -0,0 +1,53 @@ +From 07482193cccdfe9ede1f47d72790dfbe54343505 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Wed, 22 Apr 2009 10:26:06 +0300 +Subject: [PATCH] DSS2: OMAPFB: remove fb clearing code + +VRAM manager does the clearing now when the area is allocated. +--- + drivers/video/omap2/omapfb/omapfb-main.c | 8 -------- + 1 files changed, 0 insertions(+), 8 deletions(-) + +diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c +index cd63740..76e7c6c 100644 +--- a/drivers/video/omap2/omapfb/omapfb-main.c ++++ b/drivers/video/omap2/omapfb/omapfb-main.c +@@ -1174,7 +1174,6 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size, + struct omapfb2_mem_region *rg; + void __iomem *vaddr; + int r; +- int clear = 0; + + rg = &ofbi->region; + memset(rg, 0, sizeof(*rg)); +@@ -1184,7 +1183,6 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size, + if (!paddr) { + DBG("allocating %lu bytes for fb %d\n", size, ofbi->id); + r = omap_vram_alloc(OMAPFB_MEMTYPE_SDRAM, size, &paddr); +- clear = 1; + } else { + DBG("reserving %lu bytes at %lx for fb %d\n", size, paddr, + ofbi->id); +@@ -1206,9 +1204,6 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size, + } + + DBG("allocated VRAM paddr %lx, vaddr %p\n", paddr, vaddr); +- +- if (clear) +- memset_io(vaddr, 0, size); + } else { + void __iomem *va; + +@@ -1232,9 +1227,6 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size, + rg->vrfb.vaddr[0] = va; + + vaddr = NULL; +- +- if (clear) +- memset_io(va, 0, size); + } + + rg->paddr = paddr; +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0051-DSS2-VRAM-use-debugfs-not-procfs.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0051-DSS2-VRAM-use-debugfs-not-procfs.patch new file mode 100644 index 000000000..93ff3205d --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0051-DSS2-VRAM-use-debugfs-not-procfs.patch @@ -0,0 +1,170 @@ +From b47aef28536f3c276d232c41cd3084c69389dca4 Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Wed, 22 Apr 2009 14:11:52 +0300 +Subject: [PATCH] DSS2: VRAM: use debugfs, not procfs + +--- + arch/arm/plat-omap/vram.c | 103 +++++++++++++++------------------------------ + 1 files changed, 34 insertions(+), 69 deletions(-) + +diff --git a/arch/arm/plat-omap/vram.c b/arch/arm/plat-omap/vram.c +index 90276ac..e847579 100644 +--- a/arch/arm/plat-omap/vram.c ++++ b/arch/arm/plat-omap/vram.c +@@ -27,11 +27,11 @@ + #include + #include + #include +-#include + #include + #include + #include + #include ++#include + + #include + +@@ -398,88 +398,54 @@ int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr) + } + EXPORT_SYMBOL(omap_vram_alloc); + +-#ifdef CONFIG_PROC_FS +-static void *r_next(struct seq_file *m, void *v, loff_t *pos) +-{ +- struct list_head *l = v; +- +- (*pos)++; +- +- if (list_is_last(l, ®ion_list)) +- return NULL; +- +- return l->next; +-} +- +-static void *r_start(struct seq_file *m, loff_t *pos) +-{ +- loff_t p = *pos; +- struct list_head *l = ®ion_list; +- +- mutex_lock(®ion_mutex); +- +- do { +- l = l->next; +- if (l == ®ion_list) +- return NULL; +- } while (p--); +- +- return l; +-} +- +-static void r_stop(struct seq_file *m, void *v) +-{ +- mutex_unlock(®ion_mutex); +-} +- +-static int r_show(struct seq_file *m, void *v) ++#if defined(CONFIG_DEBUG_FS) ++static int vram_debug_show(struct seq_file *s, void *unused) + { + struct vram_region *vr; + struct vram_alloc *va; + unsigned size; + +- vr = list_entry(v, struct vram_region, list); +- +- size = vr->pages << PAGE_SHIFT; +- +- seq_printf(m, "%08lx-%08lx (%d bytes)\n", +- vr->paddr, vr->paddr + size - 1, +- size); ++ mutex_lock(®ion_mutex); + +- list_for_each_entry(va, &vr->alloc_list, list) { +- size = va->pages << PAGE_SHIFT; +- seq_printf(m, " %08lx-%08lx (%d bytes)\n", +- va->paddr, va->paddr + size - 1, ++ list_for_each_entry(vr, ®ion_list, list) { ++ size = vr->pages << PAGE_SHIFT; ++ seq_printf(s, "%08lx-%08lx (%d bytes)\n", ++ vr->paddr, vr->paddr + size - 1, + size); +- } + ++ list_for_each_entry(va, &vr->alloc_list, list) { ++ size = va->pages << PAGE_SHIFT; ++ seq_printf(s, " %08lx-%08lx (%d bytes)\n", ++ va->paddr, va->paddr + size - 1, ++ size); ++ } ++ } + ++ mutex_unlock(®ion_mutex); + + return 0; + } + +-static const struct seq_operations resource_op = { +- .start = r_start, +- .next = r_next, +- .stop = r_stop, +- .show = r_show, +-}; +- +-static int vram_open(struct inode *inode, struct file *file) ++static int vram_debug_open(struct inode *inode, struct file *file) + { +- return seq_open(file, &resource_op); ++ return single_open(file, vram_debug_show, inode->i_private); + } + +-static const struct file_operations proc_vram_operations = { +- .open = vram_open, +- .read = seq_read, +- .llseek = seq_lseek, +- .release = seq_release, ++static const struct file_operations vram_debug_fops = { ++ .open = vram_debug_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, + }; + +-static int __init omap_vram_create_proc(void) ++static int __init omap_vram_create_debugfs(void) + { +- proc_create("omap-vram", 0, NULL, &proc_vram_operations); ++ struct dentry *d; ++ ++ d = debugfs_create_file("vram", S_IRUGO, NULL, ++ NULL, &vram_debug_fops); ++ if (IS_ERR(d)) ++ return PTR_ERR(d); + + return 0; + } +@@ -487,7 +453,7 @@ static int __init omap_vram_create_proc(void) + + static __init int omap_vram_init(void) + { +- int i, r; ++ int i; + + vram_initialized = 1; + +@@ -495,10 +461,9 @@ static __init int omap_vram_init(void) + omap_vram_add_region(postponed_regions[i].paddr, + postponed_regions[i].size); + +-#ifdef CONFIG_PROC_FS +- r = omap_vram_create_proc(); +- if (r) +- return -ENOMEM; ++#ifdef CONFIG_DEBUG_FS ++ if (omap_vram_create_debugfs()) ++ pr_err("VRAM: Failed to create debugfs file\n"); + #endif + + return 0; +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0052-DSS2-VRAM-fix-section-mismatch-warning.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0052-DSS2-VRAM-fix-section-mismatch-warning.patch new file mode 100644 index 000000000..b8f89b623 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0052-DSS2-VRAM-fix-section-mismatch-warning.patch @@ -0,0 +1,34 @@ +From 635fa66abe6e502c9b78b1dc66757bf67fd163e1 Mon Sep 17 00:00:00 2001 +From: Imre Deak +Date: Wed, 22 Apr 2009 14:40:48 +0200 +Subject: [PATCH] DSS2: VRAM: fix section mismatch warning + +postponed_regions are accessed from the non __init +omap_vram_add_region(). + +Signed-off-by: Imre Deak +--- + arch/arm/plat-omap/vram.c | 4 ++-- + 1 files changed, 2 insertions(+), 2 deletions(-) + +diff --git a/arch/arm/plat-omap/vram.c b/arch/arm/plat-omap/vram.c +index e847579..b126a64 100644 +--- a/arch/arm/plat-omap/vram.c ++++ b/arch/arm/plat-omap/vram.c +@@ -63,11 +63,11 @@ + #define MAX_POSTPONED_REGIONS 10 + + static bool vram_initialized; +-static int postponed_cnt __initdata; ++static int postponed_cnt; + static struct { + unsigned long paddr; + size_t size; +-} postponed_regions[MAX_POSTPONED_REGIONS] __initdata; ++} postponed_regions[MAX_POSTPONED_REGIONS]; + + struct vram_alloc { + struct list_head list; +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/dss2/0053-DSS2-disable-LCD-DIGIT-before-resetting-DSS.patch b/meta/packages/linux/linux-omap-2.6.29/dss2/0053-DSS2-disable-LCD-DIGIT-before-resetting-DSS.patch new file mode 100644 index 000000000..f591fb700 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/dss2/0053-DSS2-disable-LCD-DIGIT-before-resetting-DSS.patch @@ -0,0 +1,41 @@ +From c7ce3c5e9f7e28900b8ea9c3e1afe41dcdc0863d Mon Sep 17 00:00:00 2001 +From: Tomi Valkeinen +Date: Thu, 23 Apr 2009 10:46:53 +0300 +Subject: [PATCH] DSS2: disable LCD & DIGIT before resetting DSS + +This seems to fix the synclost problem that we get, if the bootloader +starts the DSS and the kernel resets it. +--- + drivers/video/omap2/dss/dss.c | 8 +++++--- + 1 files changed, 5 insertions(+), 3 deletions(-) + +diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c +index adc1f34..aab9758 100644 +--- a/drivers/video/omap2/dss/dss.c ++++ b/drivers/video/omap2/dss/dss.c +@@ -285,6 +285,11 @@ int dss_init(bool skip_init) + } + + if (!skip_init) { ++ /* disable LCD and DIGIT output. This seems to fix the synclost ++ * problem that we get, if the bootloader starts the DSS and ++ * the kernel resets it */ ++ omap_writel(omap_readl(0x48050440) & ~0x3, 0x48050440); ++ + /* We need to wait here a bit, otherwise we sometimes start to + * get synclost errors, and after that only power cycle will + * restore DSS functionality. I have no idea why this happens. +@@ -294,10 +299,7 @@ int dss_init(bool skip_init) + msleep(50); + + _omap_dss_reset(); +- + } +- else +- printk("DSS SKIP RESET\n"); + + /* autoidle */ + REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/ehci.patch b/meta/packages/linux/linux-omap-2.6.29/ehci.patch new file mode 100644 index 000000000..e69de29bb diff --git a/meta/packages/linux/linux-omap-2.6.29/evm-mcspi-ts.diff b/meta/packages/linux/linux-omap-2.6.29/evm-mcspi-ts.diff new file mode 100644 index 000000000..64d797cf9 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/evm-mcspi-ts.diff @@ -0,0 +1,132 @@ +From linux-omap-owner@vger.kernel.org Sun Nov 02 21:08:25 2008 +Received: from localhost + ([127.0.0.1] helo=dominion ident=koen) + by dominion.dominion.void with esmtp (Exim 4.69) + (envelope-from ) + id 1KwjFJ-0008Hg-0T + for koen@localhost; Sun, 02 Nov 2008 21:08:25 +0100 +Received: from xs.service.utwente.nl [130.89.5.250] + by dominion with POP3 (fetchmail-6.3.9-rc2) + for (single-drop); Sun, 02 Nov 2008 21:08:25 +0100 (CET) +Received: from mail.service.utwente.nl ([130.89.5.253]) by exchange.service.utwente.nl with Microsoft SMTPSVC(6.0.3790.3959); + Sun, 2 Nov 2008 20:57:16 +0100 +Received: from mx.utwente.nl ([130.89.2.13]) by mail.service.utwente.nl with Microsoft SMTPSVC(6.0.3790.3959); + Sun, 2 Nov 2008 20:57:16 +0100 +Received: from vger.kernel.org (vger.kernel.org [209.132.176.167]) + by mx.utwente.nl (8.12.10/SuSE Linux 0.7) with ESMTP id mA2JudEK010968 + for ; Sun, 2 Nov 2008 20:56:40 +0100 +Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand + id S1752819AbYKBT4i (ORCPT ); + Sun, 2 Nov 2008 14:56:38 -0500 +Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752829AbYKBT4i + (ORCPT ); Sun, 2 Nov 2008 14:56:38 -0500 +Received: from fg-out-1718.google.com ([72.14.220.153]:32481 "EHLO + fg-out-1718.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org + with ESMTP id S1752819AbYKBT4h (ORCPT + ); Sun, 2 Nov 2008 14:56:37 -0500 +Received: by fg-out-1718.google.com with SMTP id 19so1869080fgg.17 + for ; Sun, 02 Nov 2008 11:56:33 -0800 (PST) +DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; + d=gmail.com; s=gamma; + h=domainkey-signature:received:received:from:to:cc:subject:date + :message-id:x-mailer:in-reply-to:references; + bh=Ftvoq8kE3ciPRy7pNy5VLkNnZD8o0HYWIrO1LMS/lAY=; + b=HpEcngDUbAObGNJuQmBIG3SoNHesUL57GluZGlYO7kxFxfH6N8zeHjKuRSk86+mT5s + gMhyCC07wjVp75HnqCtKbOJzNw/8F4ZGbL2lY1LC99+zxHW1JBQv5c3ZaoCVqTw6TuH0 + bQ8Ew2BwHknT3wGA+QcGoMJJs5aw62AhPiyHY= +DomainKey-Signature: a=rsa-sha1; c=nofws; + d=gmail.com; s=gamma; + h=from:to:cc:subject:date:message-id:x-mailer:in-reply-to:references; + b=aio1APZhCIcYIrMY844QkdaQzKw0/yiuaVjqfv52fnft1kafGT2qAS3KfXAc61a9If + sXHbi2fr/r1a7YZJJVGqkJX0WmWTY0OqdhS1lmugP/dXEMHeqaArKATbvxrq9/svb1bV + Vzpkm6sOzLrr54uo+BcZNoxHWqb8W2UrRxuTk= +Received: by 10.103.131.18 with SMTP id i18mr6668205mun.126.1225655793072; + Sun, 02 Nov 2008 11:56:33 -0800 (PST) +Received: from localhost.localdomain ([78.59.134.74]) + by mx.google.com with ESMTPS id g1sm23199635muf.8.2008.11.02.11.56.31 + (version=TLSv1/SSLv3 cipher=RC4-MD5); + Sun, 02 Nov 2008 11:56:31 -0800 (PST) +From: Grazvydas Ignotas +To: linux-omap@vger.kernel.org +Cc: Grazvydas Ignotas +Subject: Re: omap3evm LCD red-tint workaround +Date: Sun, 2 Nov 2008 21:56:19 +0200 +Message-Id: <1225655779-18934-1-git-send-email-notasas@gmail.com> +X-Mailer: git-send-email 1.5.4.3 +In-Reply-To: <57322719-1A5A-45DC-9846-5C0A3B6EF346@student.utwente.nl> +References: <57322719-1A5A-45DC-9846-5C0A3B6EF346@student.utwente.nl> +Sender: linux-omap-owner@vger.kernel.org +Precedence: bulk +List-ID: +X-Mailing-List: linux-omap@vger.kernel.org +X-UTwente-MailScanner-Information: Scanned by MailScanner. Contact servicedesk@icts.utwente.nl for more information. +X-UTwente-MailScanner: Found to be clean +X-UTwente-MailScanner-From: linux-omap-owner@vger.kernel.org +X-Spam-Status: No +X-OriginalArrivalTime: 02 Nov 2008 19:57:16.0876 (UTC) FILETIME=[34FBA0C0:01C93D25] + +> PS: TS is still unusable with the 16x16 pixel resolution +This is also the case for Pandora. The patch below fixes the problem, +but as I have no other boards to test this on, I haven't sent it. +See if it helps you. + + +From 91f3af26bbf751b846e6265d86387e81be7c1364 Mon Sep 17 00:00:00 2001 +From: Grazvydas Ignotas +Date: Tue, 28 Oct 2008 22:01:42 +0200 +Subject: [PATCH] OMAP3: fix McSPI transfers + +Currently on OMAP3 if both write and read is set up for a transfer, +the first byte returned on read is corrupted. Work around this by +disabling channel between reads and writes, instead of transfers. +--- + drivers/spi/omap2_mcspi.c | 7 ++++--- + 1 files changed, 4 insertions(+), 3 deletions(-) + +diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c +index 454a271..4890b6c 100644 +--- a/drivers/spi/omap2_mcspi.c ++++ b/drivers/spi/omap2_mcspi.c +@@ -710,7 +710,6 @@ static void omap2_mcspi_work(struct work_struct *work) + spi = m->spi; + cs = spi->controller_state; + +- omap2_mcspi_set_enable(spi, 1); + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { + status = -EINVAL; +@@ -741,6 +740,8 @@ static void omap2_mcspi_work(struct work_struct *work) + if (t->len) { + unsigned count; + ++ omap2_mcspi_set_enable(spi, 1); ++ + /* RX_ONLY mode needs dummy data in TX reg */ + if (t->tx_buf == NULL) + __raw_writel(0, cs->base +@@ -752,6 +753,8 @@ static void omap2_mcspi_work(struct work_struct *work) + count = omap2_mcspi_txrx_pio(spi, t); + m->actual_length += count; + ++ omap2_mcspi_set_enable(spi, 0); ++ + if (count != t->len) { + status = -EIO; + break; +@@ -777,8 +780,6 @@ static void omap2_mcspi_work(struct work_struct *work) + if (cs_active) + omap2_mcspi_force_cs(spi, 0); + +- omap2_mcspi_set_enable(spi, 0); +- + m->status = status; + m->complete(m->context); + +-- +1.5.4.3 + +-- +To unsubscribe from this list: send the line "unsubscribe linux-omap" in +the body of a message to majordomo@vger.kernel.org +More majordomo info at http://vger.kernel.org/majordomo-info.html + diff --git a/meta/packages/linux/linux-omap-2.6.29/fix-audio-capture.patch b/meta/packages/linux/linux-omap-2.6.29/fix-audio-capture.patch new file mode 100644 index 000000000..c5ff91475 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/fix-audio-capture.patch @@ -0,0 +1,16 @@ +diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c +index ee2f0d3..8b4aafb 100644 +--- a/sound/soc/codecs/twl4030.c ++++ b/sound/soc/codecs/twl4030.c +@@ -45,8 +45,8 @@ static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = { + 0xc3, /* REG_OPTION (0x2) */ + 0x00, /* REG_UNKNOWN (0x3) */ + 0x00, /* REG_MICBIAS_CTL (0x4) */ +- 0x20, /* REG_ANAMICL (0x5) */ +- 0x00, /* REG_ANAMICR (0x6) */ ++ 0x34, /* REG_ANAMICL (0x5) */ ++ 0x14, /* REG_ANAMICR (0x6) */ + 0x00, /* REG_AVADC_CTL (0x7) */ + 0x00, /* REG_ADCMICSEL (0x8) */ + 0x00, /* REG_DIGMIXING (0x9) */ + diff --git a/meta/packages/linux/linux-omap-2.6.29/fix-install.patch b/meta/packages/linux/linux-omap-2.6.29/fix-install.patch new file mode 100644 index 000000000..46bc25a50 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/fix-install.patch @@ -0,0 +1,23 @@ +From: Steve Sakoman +Date: Mon, 18 Aug 2008 16:07:31 +0000 (-0700) +Subject: scripts/Makefile.fwinst: add missing space when setting mode in cmd_install +X-Git-Url: http://www.sakoman.net/cgi-bin/gitweb.cgi?p=linux-omap-2.6.git;a=commitdiff_plain;h=f039944bdd491cde7327133e9976881d3133ae70 + +scripts/Makefile.fwinst: add missing space when setting mode in cmd_install + +This was causing build failures on some machines +--- + +diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst +index 6bf8e87..fb20532 100644 +--- a/scripts/Makefile.fwinst ++++ b/scripts/Makefile.fwinst +@@ -37,7 +37,7 @@ install-all-dirs: $(installed-fw-dirs) + @true + + quiet_cmd_install = INSTALL $(subst $(srctree)/,,$@) +- cmd_install = $(INSTALL) -m0644 $< $@ ++ cmd_install = $(INSTALL) -m 0644 $< $@ + + $(installed-fw-dirs): + $(call cmd,mkdir) diff --git a/meta/packages/linux/linux-omap-2.6.29/fix-unaligned-access.diff b/meta/packages/linux/linux-omap-2.6.29/fix-unaligned-access.diff new file mode 100644 index 000000000..c82090f54 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/fix-unaligned-access.diff @@ -0,0 +1,41 @@ +From: Mans Rullgard +Date: Sat, 28 Mar 2009 12:54:25 +0000 (+0000) +Subject: NSM: Fix unaligned accesses in nsm_init_private() +X-Git-Url: http://git.mansr.com/?p=linux-omap;a=commitdiff_plain;h=8f2bd6fdde1ebfef57f65b6cf29b29008c23d297 + +NSM: Fix unaligned accesses in nsm_init_private() + +This fixes unaligned accesses in nsm_init_private() when +creating nlm_reboot keys. + +Signed-off-by: Mans Rullgard +--- + +diff --git a/fs/lockd/mon.c b/fs/lockd/mon.c +index 5e2c4d5..6d5d4a4 100644 +--- a/fs/lockd/mon.c ++++ b/fs/lockd/mon.c +@@ -16,6 +16,8 @@ + #include + #include + ++#include ++ + #define NLMDBG_FACILITY NLMDBG_MONITOR + #define NSM_PROGRAM 100024 + #define NSM_VERSION 1 +@@ -274,10 +276,12 @@ static void nsm_init_private(struct nsm_handle *nsm) + { + u64 *p = (u64 *)&nsm->sm_priv.data; + struct timespec ts; ++ s64 ns; + + ktime_get_ts(&ts); +- *p++ = timespec_to_ns(&ts); +- *p = (unsigned long)nsm; ++ ns = timespec_to_ns(&ts); ++ put_unaligned(ns, p); ++ put_unaligned((unsigned long)nsm, p + 1); + } + + static struct nsm_handle *nsm_create_handle(const struct sockaddr *sap, diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/base/0001-omap3-Add-base-address-definitions-and-resources-fo.patch b/meta/packages/linux/linux-omap-2.6.29/isp/base/0001-omap3-Add-base-address-definitions-and-resources-fo.patch new file mode 100644 index 000000000..902f87943 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/base/0001-omap3-Add-base-address-definitions-and-resources-fo.patch @@ -0,0 +1,153 @@ +From 742cc1e62f0d04333c51630f3020da000aeb6de1 Mon Sep 17 00:00:00 2001 +From: Sakari Ailus +Date: Mon, 2 Mar 2009 19:36:26 +0200 +Subject: [PATCH] omap3: Add base address definitions and resources for OMAP 3 ISP + +This replaces earlier patch from Sergio Aguirre titled "[REVIEW PATCH 03/14] +OMAP34XX: CAM: Resources fixes". + +Signed-off-by: Sakari Ailus +--- + arch/arm/mach-omap2/devices.c | 66 ++++++++++++++++++++++++--- + arch/arm/plat-omap/include/mach/omap34xx.h | 28 +++++++++++- + 2 files changed, 85 insertions(+), 9 deletions(-) + +diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c +index dad4528..2568b0c 100644 +--- a/arch/arm/mach-omap2/devices.c ++++ b/arch/arm/mach-omap2/devices.c +@@ -56,10 +56,60 @@ static inline void omap_init_camera(void) + + #elif defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE) + +-static struct resource cam_resources[] = { ++static struct resource omap3isp_resources[] = { ++ { ++ .start = OMAP3430_ISP_BASE, ++ .end = OMAP3430_ISP_END, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = OMAP3430_ISP_CBUFF_BASE, ++ .end = OMAP3430_ISP_CBUFF_END, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = OMAP3430_ISP_CCP2_BASE, ++ .end = OMAP3430_ISP_CCP2_END, ++ .flags = IORESOURCE_MEM, ++ }, + { +- .start = OMAP34XX_CAMERA_BASE, +- .end = OMAP34XX_CAMERA_BASE + 0x1B70, ++ .start = OMAP3430_ISP_CCDC_BASE, ++ .end = OMAP3430_ISP_CCDC_END, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = OMAP3430_ISP_HIST_BASE, ++ .end = OMAP3430_ISP_HIST_END, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = OMAP3430_ISP_H3A_BASE, ++ .end = OMAP3430_ISP_H3A_END, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = OMAP3430_ISP_PREV_BASE, ++ .end = OMAP3430_ISP_PREV_END, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = OMAP3430_ISP_RESZ_BASE, ++ .end = OMAP3430_ISP_RESZ_END, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = OMAP3430_ISP_SBL_BASE, ++ .end = OMAP3430_ISP_SBL_END, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = OMAP3430_ISP_CSI2A_BASE, ++ .end = OMAP3430_ISP_CSI2A_END, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = OMAP3430_ISP_CSI2PHY_BASE, ++ .end = OMAP3430_ISP_CSI2PHY_END, + .flags = IORESOURCE_MEM, + }, + { +@@ -68,16 +118,16 @@ static struct resource cam_resources[] = { + } + }; + +-static struct platform_device omap_cam_device = { +- .name = "omap34xxcam", ++static struct platform_device omap3isp_device = { ++ .name = "omap3isp", + .id = -1, +- .num_resources = ARRAY_SIZE(cam_resources), +- .resource = cam_resources, ++ .num_resources = ARRAY_SIZE(omap3isp_resources), ++ .resource = omap3isp_resources, + }; + + static inline void omap_init_camera(void) + { +- platform_device_register(&omap_cam_device); ++ platform_device_register(&omap3isp_device); + } + #else + static inline void omap_init_camera(void) +diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h +index 27a1e45..3bfbdf7 100644 +--- a/arch/arm/plat-omap/include/mach/omap34xx.h ++++ b/arch/arm/plat-omap/include/mach/omap34xx.h +@@ -49,6 +49,33 @@ + #define OMAP343X_CTRL_BASE OMAP343X_SCM_BASE + + #define OMAP34XX_IC_BASE 0x48200000 ++ ++#define OMAP3430_ISP_BASE (L4_34XX_BASE + 0xBC000) ++#define OMAP3430_ISP_CBUFF_BASE (OMAP3430_ISP_BASE + 0x0100) ++#define OMAP3430_ISP_CCP2_BASE (OMAP3430_ISP_BASE + 0x0400) ++#define OMAP3430_ISP_CCDC_BASE (OMAP3430_ISP_BASE + 0x0600) ++#define OMAP3430_ISP_HIST_BASE (OMAP3430_ISP_BASE + 0x0A00) ++#define OMAP3430_ISP_H3A_BASE (OMAP3430_ISP_BASE + 0x0C00) ++#define OMAP3430_ISP_PREV_BASE (OMAP3430_ISP_BASE + 0x0E00) ++#define OMAP3430_ISP_RESZ_BASE (OMAP3430_ISP_BASE + 0x1000) ++#define OMAP3430_ISP_SBL_BASE (OMAP3430_ISP_BASE + 0x1200) ++#define OMAP3430_ISP_MMU_BASE (OMAP3430_ISP_BASE + 0x1400) ++#define OMAP3430_ISP_CSI2A_BASE (OMAP3430_ISP_BASE + 0x1800) ++#define OMAP3430_ISP_CSI2PHY_BASE (OMAP3430_ISP_BASE + 0x1970) ++ ++#define OMAP3430_ISP_END (OMAP3430_ISP_BASE + 0x06F) ++#define OMAP3430_ISP_CBUFF_END (OMAP3430_ISP_CBUFF_BASE + 0x077) ++#define OMAP3430_ISP_CCP2_END (OMAP3430_ISP_CCP2_BASE + 0x1EF) ++#define OMAP3430_ISP_CCDC_END (OMAP3430_ISP_CCDC_BASE + 0x0A7) ++#define OMAP3430_ISP_HIST_END (OMAP3430_ISP_HIST_BASE + 0x047) ++#define OMAP3430_ISP_H3A_END (OMAP3430_ISP_H3A_BASE + 0x05F) ++#define OMAP3430_ISP_PREV_END (OMAP3430_ISP_PREV_BASE + 0x09F) ++#define OMAP3430_ISP_RESZ_END (OMAP3430_ISP_RESZ_BASE + 0x0AB) ++#define OMAP3430_ISP_SBL_END (OMAP3430_ISP_SBL_BASE + 0x0FB) ++#define OMAP3430_ISP_MMU_END (OMAP3430_ISP_MMU_BASE + 0x06F) ++#define OMAP3430_ISP_CSI2A_END (OMAP3430_ISP_CSI2A_BASE + 0x16F) ++#define OMAP3430_ISP_CSI2PHY_END (OMAP3430_ISP_CSI2PHY_BASE + 0x007) ++ + #define OMAP34XX_IVA_INTC_BASE 0x40000000 + #define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000) + #define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000) +@@ -56,7 +83,6 @@ + #define OMAP34XX_SR1_BASE 0x480C9000 + #define OMAP34XX_SR2_BASE 0x480CB000 + +-#define OMAP34XX_CAMERA_BASE (L4_34XX_BASE + 0xBC000) + #define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000) + + +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0001-omap-iommu-tlb-and-pagetable-primitives.patch b/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0001-omap-iommu-tlb-and-pagetable-primitives.patch new file mode 100644 index 000000000..c2c9bc2b6 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0001-omap-iommu-tlb-and-pagetable-primitives.patch @@ -0,0 +1,1226 @@ +From a62a047ed02162573e4bece18ecf8bdd66ccd06b Mon Sep 17 00:00:00 2001 +From: Hiroshi DOYU +Date: Mon, 26 Jan 2009 15:13:40 +0200 +Subject: [PATCH] omap iommu: tlb and pagetable primitives + +This patch provides: + +- iotlb_*() : iommu tlb operations +- iopgtable_*() : iommu pagetable(twl) operations +- iommu_*() : the other generic operations + +and the entry points to register and acquire iommu object. + +Signed-off-by: Hiroshi DOYU +--- + arch/arm/plat-omap/include/mach/iommu.h | 157 +++++ + arch/arm/plat-omap/iommu.c | 953 +++++++++++++++++++++++++++++++ + arch/arm/plat-omap/iopgtable.h | 72 +++ + 3 files changed, 1182 insertions(+), 0 deletions(-) + create mode 100644 arch/arm/plat-omap/include/mach/iommu.h + create mode 100644 arch/arm/plat-omap/iommu.c + create mode 100644 arch/arm/plat-omap/iopgtable.h + +diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/mach/iommu.h +new file mode 100644 +index 0000000..ef04d7a +--- /dev/null ++++ b/arch/arm/plat-omap/include/mach/iommu.h +@@ -0,0 +1,157 @@ ++/* ++ * omap iommu: main structures ++ * ++ * Copyright (C) 2008-2009 Nokia Corporation ++ * ++ * Written by Hiroshi DOYU ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef __MACH_IOMMU_H ++#define __MACH_IOMMU_H ++ ++struct iotlb_entry { ++ u32 da; ++ u32 pa; ++ u32 pgsz, prsvd, valid; ++ union { ++ u16 ap; ++ struct { ++ u32 endian, elsz, mixed; ++ }; ++ }; ++}; ++ ++struct iommu { ++ const char *name; ++ struct module *owner; ++ struct clk *clk; ++ void __iomem *regbase; ++ struct device *dev; ++ ++ unsigned int refcount; ++ struct mutex iommu_lock; /* global for this whole object */ ++ ++ /* ++ * We don't change iopgd for a situation like pgd for a task, ++ * but share it globally for each iommu. ++ */ ++ u32 *iopgd; ++ spinlock_t page_table_lock; /* protect iopgd */ ++ ++ int nr_tlb_entries; ++ ++ struct list_head mmap; ++ struct mutex mmap_lock; /* protect mmap */ ++ ++ int (*isr)(struct iommu *obj); ++ ++ void *ctx; /* iommu context: registres saved area */ ++}; ++ ++struct cr_regs { ++ union { ++ struct { ++ u16 cam_l; ++ u16 cam_h; ++ }; ++ u32 cam; ++ }; ++ union { ++ struct { ++ u16 ram_l; ++ u16 ram_h; ++ }; ++ u32 ram; ++ }; ++}; ++ ++struct iotlb_lock { ++ short base; ++ short vict; ++}; ++ ++/* architecture specific functions */ ++struct iommu_functions { ++ unsigned long version; ++ ++ int (*enable)(struct iommu *obj); ++ void (*disable)(struct iommu *obj); ++ u32 (*fault_isr)(struct iommu *obj, u32 *ra); ++ ++ void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr); ++ void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr); ++ ++ struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e); ++ int (*cr_valid)(struct cr_regs *cr); ++ u32 (*cr_to_virt)(struct cr_regs *cr); ++ void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e); ++ ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf); ++ ++ u32 (*get_pte_attr)(struct iotlb_entry *e); ++ ++ void (*save_ctx)(struct iommu *obj); ++ void (*restore_ctx)(struct iommu *obj); ++ ssize_t (*dump_ctx)(struct iommu *obj, char *buf); ++}; ++ ++struct iommu_platform_data { ++ const char *name; ++ const char *clk_name; ++ const int nr_tlb_entries; ++}; ++ ++#include ++ ++/* ++ * utilities for super page(16MB, 1MB, 64KB and 4KB) ++ */ ++ ++#define iopgsz_max(bytes) \ ++ (((bytes) >= SZ_16M) ? SZ_16M : \ ++ ((bytes) >= SZ_1M) ? SZ_1M : \ ++ ((bytes) >= SZ_64K) ? SZ_64K : \ ++ ((bytes) >= SZ_4K) ? SZ_4K : 0) ++ ++#define bytes_to_iopgsz(bytes) \ ++ (((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M : \ ++ ((bytes) == SZ_1M) ? MMU_CAM_PGSZ_1M : \ ++ ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K : \ ++ ((bytes) == SZ_4K) ? MMU_CAM_PGSZ_4K : -1) ++ ++#define iopgsz_to_bytes(iopgsz) \ ++ (((iopgsz) == MMU_CAM_PGSZ_16M) ? SZ_16M : \ ++ ((iopgsz) == MMU_CAM_PGSZ_1M) ? SZ_1M : \ ++ ((iopgsz) == MMU_CAM_PGSZ_64K) ? SZ_64K : \ ++ ((iopgsz) == MMU_CAM_PGSZ_4K) ? SZ_4K : 0) ++ ++#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0) ++ ++/* ++ * global functions ++ */ ++extern u32 iommu_arch_version(void); ++ ++extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e); ++extern void flush_iotlb_page(struct iommu *obj, u32 da); ++extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end); ++extern void flush_iotlb_all(struct iommu *obj); ++ ++ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf); ++ ++extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e); ++extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova); ++ ++extern struct iommu *iommu_get(const char *name); ++extern void iommu_put(struct iommu *obj); ++ ++extern void iommu_save_ctx(struct iommu *obj); ++extern void iommu_restore_ctx(struct iommu *obj); ++ ++extern int install_iommu_arch(const struct iommu_functions *ops); ++extern void uninstall_iommu_arch(const struct iommu_functions *ops); ++ ++#endif /* __MACH_IOMMU_H */ +diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c +new file mode 100644 +index 0000000..e638883 +--- /dev/null ++++ b/arch/arm/plat-omap/iommu.c +@@ -0,0 +1,953 @@ ++/* ++ * omap iommu: tlb and pagetable primitives ++ * ++ * Copyright (C) 2008-2009 Nokia Corporation ++ * ++ * Written by Hiroshi DOYU , ++ * Paul Mundt and Toshihiro Kobayashi ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++ ++#include "iopgtable.h" ++ ++/* accommodate the difference between omap1 and omap2/3 */ ++static const struct iommu_functions *arch_iommu; ++ ++static struct platform_driver omap_iommu_driver; ++static struct kmem_cache *iopte_cachep; ++ ++/** ++ * install_iommu_arch() - Install archtecure specific iommu functions ++ * @ops: a pointer to architecture specific iommu functions ++ * ++ * There are several kind of iommu algorithm(tlb, pagetable) among ++ * omap series. This interface installs such an iommu algorighm. ++ **/ ++int install_iommu_arch(const struct iommu_functions *ops) ++{ ++ if (arch_iommu) ++ return -EBUSY; ++ ++ arch_iommu = ops; ++ return 0; ++} ++EXPORT_SYMBOL_GPL(install_iommu_arch); ++ ++/** ++ * uninstall_iommu_arch() - Uninstall archtecure specific iommu functions ++ * @ops: a pointer to architecture specific iommu functions ++ * ++ * This interface uninstalls the iommu algorighm installed previously. ++ **/ ++void uninstall_iommu_arch(const struct iommu_functions *ops) ++{ ++ if (arch_iommu != ops) ++ pr_err("%s: not your arch\n", __func__); ++ ++ arch_iommu = NULL; ++} ++EXPORT_SYMBOL_GPL(uninstall_iommu_arch); ++ ++/** ++ * iommu_save_ctx() - Save registers for pm off-mode support ++ * @obj: target iommu ++ **/ ++void iommu_save_ctx(struct iommu *obj) ++{ ++ arch_iommu->save_ctx(obj); ++} ++EXPORT_SYMBOL_GPL(iommu_save_ctx); ++ ++/** ++ * iommu_restore_ctx() - Restore registers for pm off-mode support ++ * @obj: target iommu ++ **/ ++void iommu_restore_ctx(struct iommu *obj) ++{ ++ arch_iommu->restore_ctx(obj); ++} ++EXPORT_SYMBOL_GPL(iommu_restore_ctx); ++ ++/** ++ * iommu_arch_version() - Return running iommu arch version ++ **/ ++u32 iommu_arch_version(void) ++{ ++ return arch_iommu->version; ++} ++EXPORT_SYMBOL_GPL(iommu_arch_version); ++ ++static int iommu_enable(struct iommu *obj) ++{ ++ int err; ++ ++ if (!obj) ++ return -EINVAL; ++ ++ clk_enable(obj->clk); ++ ++ err = arch_iommu->enable(obj); ++ ++ clk_disable(obj->clk); ++ return err; ++} ++ ++static void iommu_disable(struct iommu *obj) ++{ ++ if (!obj) ++ return; ++ ++ clk_enable(obj->clk); ++ ++ arch_iommu->disable(obj); ++ ++ clk_disable(obj->clk); ++} ++ ++#ifdef DEBUG ++static ssize_t iommu_dump_ctx(struct iommu *obj, char *buf) ++{ ++ if (!obj || !buf) ++ return -EINVAL; ++ ++ return arch_iommu->dump_ctx(obj, buf); ++} ++#endif ++ ++/* ++ * TLB operations ++ */ ++static inline void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e) ++{ ++ BUG_ON(!cr || !e); ++ ++ arch_iommu->cr_to_e(cr, e); ++} ++ ++static inline int iotlb_cr_valid(struct cr_regs *cr) ++{ ++ if (!cr) ++ return -EINVAL; ++ ++ return arch_iommu->cr_valid(cr); ++} ++ ++static inline struct cr_regs *iotlb_alloc_cr(struct iommu *obj, ++ struct iotlb_entry *e) ++{ ++ if (!e) ++ return NULL; ++ ++ return arch_iommu->alloc_cr(obj, e); ++} ++ ++static inline u32 iotlb_cr_to_virt(struct cr_regs *cr) ++{ ++ return arch_iommu->cr_to_virt(cr); ++} ++ ++static u32 get_iopte_attr(struct iotlb_entry *e) ++{ ++ return arch_iommu->get_pte_attr(e); ++} ++ ++static u32 iommu_report_fault(struct iommu *obj, u32 *da) ++{ ++ return arch_iommu->fault_isr(obj, da); ++} ++ ++static void iotlb_lock_get(struct iommu *obj, struct iotlb_lock *l) ++{ ++ u32 val; ++ ++ val = iommu_read_reg(obj, MMU_LOCK); ++ ++ l->base = MMU_LOCK_BASE(val); ++ l->vict = MMU_LOCK_VICT(val); ++ ++ BUG_ON(l->base != 0); /* Currently no preservation is used */ ++} ++ ++static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l) ++{ ++ u32 val; ++ ++ BUG_ON(l->base != 0); /* Currently no preservation is used */ ++ ++ val = (l->base << MMU_LOCK_BASE_SHIFT); ++ val |= (l->vict << MMU_LOCK_VICT_SHIFT); ++ ++ iommu_write_reg(obj, val, MMU_LOCK); ++} ++ ++static void iotlb_read_cr(struct iommu *obj, struct cr_regs *cr) ++{ ++ arch_iommu->tlb_read_cr(obj, cr); ++} ++ ++static void iotlb_load_cr(struct iommu *obj, struct cr_regs *cr) ++{ ++ arch_iommu->tlb_load_cr(obj, cr); ++ ++ iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); ++ iommu_write_reg(obj, 1, MMU_LD_TLB); ++} ++ ++/** ++ * iotlb_dump_cr() - Dump an iommu tlb entry into buf ++ * @obj: target iommu ++ * @cr: contents of cam and ram register ++ * @buf: output buffer ++ **/ ++ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf) ++{ ++ BUG_ON(!cr || !buf); ++ ++ return arch_iommu->dump_cr(obj, cr, buf); ++} ++EXPORT_SYMBOL_GPL(iotlb_dump_cr); ++ ++/** ++ * load_iotlb_entry() - Set an iommu tlb entry ++ * @obj: target iommu ++ * @e: an iommu tlb entry info ++ **/ ++int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e) ++{ ++ int i; ++ int err = 0; ++ struct iotlb_lock l; ++ struct cr_regs *cr; ++ ++ if (!obj || !obj->nr_tlb_entries || !e) ++ return -EINVAL; ++ ++ clk_enable(obj->clk); ++ ++ for (i = 0; i < obj->nr_tlb_entries; i++) { ++ struct cr_regs tmp; ++ ++ iotlb_lock_get(obj, &l); ++ l.vict = i; ++ iotlb_lock_set(obj, &l); ++ iotlb_read_cr(obj, &tmp); ++ if (!iotlb_cr_valid(&tmp)) ++ break; ++ } ++ ++ if (i == obj->nr_tlb_entries) { ++ dev_dbg(obj->dev, "%s: full: no entry\n", __func__); ++ err = -EBUSY; ++ goto out; ++ } ++ ++ cr = iotlb_alloc_cr(obj, e); ++ if (IS_ERR(cr)) { ++ clk_disable(obj->clk); ++ return PTR_ERR(cr); ++ } ++ ++ iotlb_load_cr(obj, cr); ++ kfree(cr); ++ ++ /* increment victim for next tlb load */ ++ if (++l.vict == obj->nr_tlb_entries) ++ l.vict = 0; ++ iotlb_lock_set(obj, &l); ++out: ++ clk_disable(obj->clk); ++ return err; ++} ++EXPORT_SYMBOL_GPL(load_iotlb_entry); ++ ++/** ++ * flush_iotlb_page() - Clear an iommu tlb entry ++ * @obj: target iommu ++ * @da: iommu device virtual address ++ * ++ * Clear an iommu tlb entry which includes 'da' address. ++ **/ ++void flush_iotlb_page(struct iommu *obj, u32 da) ++{ ++ struct iotlb_lock l; ++ int i; ++ ++ clk_enable(obj->clk); ++ ++ for (i = 0; i < obj->nr_tlb_entries; i++) { ++ struct cr_regs cr; ++ u32 start; ++ size_t bytes; ++ ++ iotlb_lock_get(obj, &l); ++ l.vict = i; ++ iotlb_lock_set(obj, &l); ++ iotlb_read_cr(obj, &cr); ++ if (!iotlb_cr_valid(&cr)) ++ continue; ++ ++ start = iotlb_cr_to_virt(&cr); ++ bytes = iopgsz_to_bytes(cr.cam & 3); ++ ++ if ((start <= da) && (da < start + bytes)) { ++ dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n", ++ __func__, start, da, bytes); ++ ++ iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); ++ } ++ } ++ clk_disable(obj->clk); ++ ++ if (i == obj->nr_tlb_entries) ++ dev_dbg(obj->dev, "%s: no page for %08x\n", __func__, da); ++} ++EXPORT_SYMBOL_GPL(flush_iotlb_page); ++ ++/** ++ * flush_iotlb_range() - Clear an iommu tlb entries ++ * @obj: target iommu ++ * @start: iommu device virtual address(start) ++ * @end: iommu device virtual address(end) ++ * ++ * Clear an iommu tlb entry which includes 'da' address. ++ **/ ++void flush_iotlb_range(struct iommu *obj, u32 start, u32 end) ++{ ++ u32 da = start; ++ ++ while (da < end) { ++ flush_iotlb_page(obj, da); ++ /* FIXME: Optimize for multiple page size */ ++ da += IOPTE_SIZE; ++ } ++} ++EXPORT_SYMBOL_GPL(flush_iotlb_range); ++ ++/** ++ * flush_iotlb_all() - Clear all iommu tlb entries ++ * @obj: target iommu ++ **/ ++void flush_iotlb_all(struct iommu *obj) ++{ ++ struct iotlb_lock l; ++ ++ clk_enable(obj->clk); ++ ++ l.base = 0; ++ l.vict = 0; ++ iotlb_lock_set(obj, &l); ++ ++ iommu_write_reg(obj, 1, MMU_GFLUSH); ++ ++ clk_disable(obj->clk); ++} ++EXPORT_SYMBOL_GPL(flush_iotlb_all); ++ ++/* ++ * H/W pagetable operations ++ */ ++static void flush_iopgd_range(u32 *first, u32 *last) ++{ ++ /* FIXME: L2 cache should be taken care of if it exists */ ++ do { ++ asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pgd" ++ : : "r" (first)); ++ first += L1_CACHE_BYTES / sizeof(*first); ++ } while (first <= last); ++} ++ ++static void flush_iopte_range(u32 *first, u32 *last) ++{ ++ /* FIXME: L2 cache should be taken care of if it exists */ ++ do { ++ asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pte" ++ : : "r" (first)); ++ first += L1_CACHE_BYTES / sizeof(*first); ++ } while (first <= last); ++} ++ ++static void iopte_free(u32 *iopte) ++{ ++ /* Note: freed iopte's must be clean ready for re-use */ ++ kmem_cache_free(iopte_cachep, iopte); ++} ++ ++static u32 *iopte_alloc(struct iommu *obj, u32 *iopgd, u32 da) ++{ ++ u32 *iopte; ++ ++ /* a table has already existed */ ++ if (*iopgd) ++ goto pte_ready; ++ ++ /* ++ * do the allocation outside the page table lock ++ */ ++ spin_unlock(&obj->page_table_lock); ++ iopte = kmem_cache_zalloc(iopte_cachep, GFP_KERNEL); ++ spin_lock(&obj->page_table_lock); ++ ++ if (!*iopgd) { ++ if (!iopte) ++ return ERR_PTR(-ENOMEM); ++ ++ *iopgd = virt_to_phys(iopte) | IOPGD_TABLE; ++ flush_iopgd_range(iopgd, iopgd); ++ ++ dev_vdbg(obj->dev, "%s: a new pte:%p\n", __func__, iopte); ++ } else { ++ /* We raced, free the reduniovant table */ ++ iopte_free(iopte); ++ } ++ ++pte_ready: ++ iopte = iopte_offset(iopgd, da); ++ ++ dev_vdbg(obj->dev, ++ "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n", ++ __func__, da, iopgd, *iopgd, iopte, *iopte); ++ ++ return iopte; ++} ++ ++static int iopgd_alloc_section(struct iommu *obj, u32 da, u32 pa, u32 prot) ++{ ++ u32 *iopgd = iopgd_offset(obj, da); ++ ++ *iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION; ++ flush_iopgd_range(iopgd, iopgd); ++ return 0; ++} ++ ++static int iopgd_alloc_super(struct iommu *obj, u32 da, u32 pa, u32 prot) ++{ ++ u32 *iopgd = iopgd_offset(obj, da); ++ int i; ++ ++ for (i = 0; i < 16; i++) ++ *(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER; ++ flush_iopgd_range(iopgd, iopgd + 15); ++ return 0; ++} ++ ++static int iopte_alloc_page(struct iommu *obj, u32 da, u32 pa, u32 prot) ++{ ++ u32 *iopgd = iopgd_offset(obj, da); ++ u32 *iopte = iopte_alloc(obj, iopgd, da); ++ ++ if (IS_ERR(iopte)) ++ return PTR_ERR(iopte); ++ ++ *iopte = (pa & IOPAGE_MASK) | prot | IOPTE_SMALL; ++ flush_iopte_range(iopte, iopte); ++ ++ dev_vdbg(obj->dev, "%s: da:%08x pa:%08x pte:%p *pte:%08x\n", ++ __func__, da, pa, iopte, *iopte); ++ ++ return 0; ++} ++ ++static int iopte_alloc_large(struct iommu *obj, u32 da, u32 pa, u32 prot) ++{ ++ u32 *iopgd = iopgd_offset(obj, da); ++ u32 *iopte = iopte_alloc(obj, iopgd, da); ++ int i; ++ ++ if (IS_ERR(iopte)) ++ return PTR_ERR(iopte); ++ ++ for (i = 0; i < 16; i++) ++ *(iopte + i) = (pa & IOLARGE_MASK) | prot | IOPTE_LARGE; ++ flush_iopte_range(iopte, iopte + 15); ++ return 0; ++} ++ ++static int iopgtable_store_entry_core(struct iommu *obj, struct iotlb_entry *e) ++{ ++ int (*fn)(struct iommu *, u32, u32, u32); ++ u32 prot; ++ int err; ++ ++ if (!obj || !e) ++ return -EINVAL; ++ ++ switch (e->pgsz) { ++ case MMU_CAM_PGSZ_16M: ++ fn = iopgd_alloc_super; ++ break; ++ case MMU_CAM_PGSZ_1M: ++ fn = iopgd_alloc_section; ++ break; ++ case MMU_CAM_PGSZ_64K: ++ fn = iopte_alloc_large; ++ break; ++ case MMU_CAM_PGSZ_4K: ++ fn = iopte_alloc_page; ++ break; ++ default: ++ fn = NULL; ++ BUG(); ++ break; ++ } ++ ++ prot = get_iopte_attr(e); ++ ++ spin_lock(&obj->page_table_lock); ++ err = fn(obj, e->da, e->pa, prot); ++ spin_unlock(&obj->page_table_lock); ++ ++ return err; ++} ++ ++#ifdef DEBUG ++static void dump_tlb_entries(struct iommu *obj) ++{ ++ int i; ++ struct iotlb_lock l; ++ ++ clk_enable(obj->clk); ++ ++ pr_info("%8s %8s\n", "cam:", "ram:"); ++ pr_info("-----------------------------------------\n"); ++ ++ for (i = 0; i < obj->nr_tlb_entries; i++) { ++ struct cr_regs cr; ++ static char buf[4096]; ++ ++ iotlb_lock_get(obj, &l); ++ l.vict = i; ++ iotlb_lock_set(obj, &l); ++ iotlb_read_cr(obj, &cr); ++ if (!iotlb_cr_valid(&cr)) ++ continue; ++ ++ memset(buf, 0, 4096); ++ iotlb_dump_cr(obj, &cr, buf); ++ pr_err("%s", buf); ++ } ++ ++ clk_disable(obj->clk); ++} ++#else ++static inline void dump_tlb_entries(struct iommu *obj) {} ++#endif ++ ++/** ++ * iopgtable_store_entry() - Make an iommu pte entry ++ * @obj: target iommu ++ * @e: an iommu tlb entry info ++ **/ ++int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e) ++{ ++ int err; ++ ++ flush_iotlb_page(obj, e->da); ++ err = iopgtable_store_entry_core(obj, e); ++#ifdef USE_IOTLB ++ if (!err) ++ load_iotlb_entry(obj, e); ++#endif ++ return err; ++} ++EXPORT_SYMBOL_GPL(iopgtable_store_entry); ++ ++/** ++ * iopgtable_lookup_entry() - Lookup an iommu pte entry ++ * @obj: target iommu ++ * @da: iommu device virtual address ++ * @ppgd: iommu pgd entry pointer to be returned ++ * @ppte: iommu pte entry pointer to be returned ++ **/ ++void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, u32 **ppte) ++{ ++ u32 *iopgd, *iopte = NULL; ++ ++ iopgd = iopgd_offset(obj, da); ++ if (!*iopgd) ++ goto out; ++ ++ if (*iopgd & IOPGD_TABLE) ++ iopte = iopte_offset(iopgd, da); ++out: ++ *ppgd = iopgd; ++ *ppte = iopte; ++} ++EXPORT_SYMBOL_GPL(iopgtable_lookup_entry); ++ ++static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da) ++{ ++ size_t bytes; ++ u32 *iopgd = iopgd_offset(obj, da); ++ int nent = 1; ++ ++ if (!*iopgd) ++ return 0; ++ ++ if (*iopgd & IOPGD_TABLE) { ++ int i; ++ u32 *iopte = iopte_offset(iopgd, da); ++ ++ bytes = IOPTE_SIZE; ++ if (*iopte & IOPTE_LARGE) { ++ nent *= 16; ++ /* rewind to the 1st entry */ ++ iopte = (u32 *)((u32)iopte & IOLARGE_MASK); ++ } ++ bytes *= nent; ++ memset(iopte, 0, nent * sizeof(*iopte)); ++ flush_iopte_range(iopte, iopte + (nent - 1) * sizeof(*iopte)); ++ ++ /* ++ * do table walk to check if this table is necessary or not ++ */ ++ iopte = iopte_offset(iopgd, 0); ++ for (i = 0; i < PTRS_PER_IOPTE; i++) ++ if (iopte[i]) ++ goto out; ++ ++ iopte_free(iopte); ++ nent = 1; /* for the next L1 entry */ ++ } else { ++ bytes = IOPGD_SIZE; ++ if (*iopgd & IOPGD_SUPER) { ++ nent *= 16; ++ /* rewind to the 1st entry */ ++ iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK); ++ } ++ bytes *= nent; ++ } ++ memset(iopgd, 0, nent * sizeof(*iopgd)); ++ flush_iopgd_range(iopgd, iopgd + (nent - 1) * sizeof(*iopgd)); ++out: ++ return bytes; ++} ++ ++/** ++ * iopgtable_clear_entry() - Remove an iommu pte entry ++ * @obj: target iommu ++ * @da: iommu device virtual address ++ **/ ++size_t iopgtable_clear_entry(struct iommu *obj, u32 da) ++{ ++ size_t bytes; ++ ++ spin_lock(&obj->page_table_lock); ++ ++ bytes = iopgtable_clear_entry_core(obj, da); ++ flush_iotlb_page(obj, da); ++ ++ spin_unlock(&obj->page_table_lock); ++ ++ return bytes; ++} ++EXPORT_SYMBOL_GPL(iopgtable_clear_entry); ++ ++static void iopgtable_clear_entry_all(struct iommu *obj) ++{ ++ int i; ++ ++ spin_lock(&obj->page_table_lock); ++ ++ for (i = 0; i < PTRS_PER_IOPGD; i++) { ++ u32 da; ++ u32 *iopgd; ++ ++ da = i << IOPGD_SHIFT; ++ iopgd = iopgd_offset(obj, da); ++ ++ if (!*iopgd) ++ continue; ++ ++ if (*iopgd & IOPGD_TABLE) ++ iopte_free(iopte_offset(iopgd, 0)); ++ ++ *iopgd = 0; ++ flush_iopgd_range(iopgd, iopgd); ++ } ++ ++ flush_iotlb_all(obj); ++ ++ spin_unlock(&obj->page_table_lock); ++} ++ ++/* ++ * Device IOMMU generic operations ++ */ ++static irqreturn_t iommu_fault_handler(int irq, void *data) ++{ ++ u32 stat, da; ++ u32 *iopgd, *iopte; ++ int err = -EIO; ++ struct iommu *obj = data; ++ ++ /* Dynamic loading TLB or PTE */ ++ if (obj->isr) ++ err = obj->isr(obj); ++ ++ if (!err) ++ return IRQ_HANDLED; ++ ++ stat = iommu_report_fault(obj, &da); ++ if (!stat) ++ return IRQ_HANDLED; ++ ++ iopgd = iopgd_offset(obj, da); ++ ++ if (!(*iopgd & IOPGD_TABLE)) { ++ dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", __func__, ++ da, iopgd, *iopgd); ++ return IRQ_NONE; ++ } ++ ++ iopte = iopte_offset(iopgd, da); ++ ++ dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n", ++ __func__, da, iopgd, *iopgd, iopte, *iopte); ++ ++ dump_tlb_entries(obj); ++ ++ return IRQ_NONE; ++} ++ ++static int device_match_by_alias(struct device *dev, void *data) ++{ ++ struct iommu *obj = to_iommu(dev); ++ const char *name = data; ++ ++ pr_debug("%s: %s %s\n", __func__, obj->name, name); ++ ++ return strcmp(obj->name, name) == 0; ++} ++ ++/** ++ * iommu_put() - Get iommu handler ++ * @name: target iommu name ++ **/ ++struct iommu *iommu_get(const char *name) ++{ ++ int err = -ENOMEM; ++ struct device *dev; ++ struct iommu *obj; ++ ++ dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name, ++ device_match_by_alias); ++ if (!dev) ++ return ERR_PTR(-ENODEV); ++ ++ obj = to_iommu(dev); ++ ++ mutex_lock(&obj->iommu_lock); ++ ++ if (obj->refcount++ == 0) { ++ err = iommu_enable(obj); ++ if (err) ++ goto err_enable; ++ flush_iotlb_all(obj); ++ } ++ ++ if (!try_module_get(obj->owner)) ++ goto err_module; ++ ++ mutex_unlock(&obj->iommu_lock); ++ ++ dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name); ++ return obj; ++ ++err_module: ++ if (obj->refcount == 1) ++ iommu_disable(obj); ++err_enable: ++ mutex_unlock(&obj->iommu_lock); ++ return ERR_PTR(err); ++} ++EXPORT_SYMBOL_GPL(iommu_get); ++ ++/** ++ * iommu_put() - Put back iommu handler ++ * @obj: target iommu ++ **/ ++void iommu_put(struct iommu *obj) ++{ ++ if (!obj && IS_ERR(obj)) ++ return; ++ ++ mutex_lock(&obj->iommu_lock); ++ ++ if (--obj->refcount == 0) ++ iommu_disable(obj); ++ ++ module_put(obj->owner); ++ ++ mutex_unlock(&obj->iommu_lock); ++ ++ dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name); ++} ++EXPORT_SYMBOL_GPL(iommu_put); ++ ++/* ++ * OMAP Device MMU(IOMMU) detection ++ */ ++static int __devinit omap_iommu_probe(struct platform_device *pdev) ++{ ++ int err = -ENODEV; ++ void *p; ++ int irq; ++ struct iommu *obj; ++ struct resource *res; ++ struct iommu_platform_data *pdata = pdev->dev.platform_data; ++ ++ if (pdev->num_resources != 2) ++ return -EINVAL; ++ ++ obj = kzalloc(sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL); ++ if (!obj) ++ return -ENOMEM; ++ ++ obj->clk = clk_get(&pdev->dev, pdata->clk_name); ++ if (IS_ERR(obj->clk)) ++ goto err_clk; ++ ++ obj->nr_tlb_entries = pdata->nr_tlb_entries; ++ obj->name = pdata->name; ++ obj->dev = &pdev->dev; ++ obj->ctx = (void *)obj + sizeof(*obj); ++ ++ mutex_init(&obj->iommu_lock); ++ mutex_init(&obj->mmap_lock); ++ spin_lock_init(&obj->page_table_lock); ++ INIT_LIST_HEAD(&obj->mmap); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ err = -ENODEV; ++ goto err_mem; ++ } ++ obj->regbase = ioremap(res->start, resource_size(res)); ++ if (!obj->regbase) { ++ err = -ENOMEM; ++ goto err_mem; ++ } ++ ++ res = request_mem_region(res->start, resource_size(res), ++ dev_name(&pdev->dev)); ++ if (!res) { ++ err = -EIO; ++ goto err_mem; ++ } ++ ++ irq = platform_get_irq(pdev, 0); ++ if (irq < 0) { ++ err = -ENODEV; ++ goto err_irq; ++ } ++ err = request_irq(irq, iommu_fault_handler, IRQF_SHARED, ++ dev_name(&pdev->dev), obj); ++ if (err < 0) ++ goto err_irq; ++ platform_set_drvdata(pdev, obj); ++ ++ p = (void *)__get_free_pages(GFP_KERNEL, get_order(IOPGD_TABLE_SIZE)); ++ if (!p) { ++ err = -ENOMEM; ++ goto err_pgd; ++ } ++ memset(p, 0, IOPGD_TABLE_SIZE); ++ clean_dcache_area(p, IOPGD_TABLE_SIZE); ++ obj->iopgd = p; ++ ++ BUG_ON(!IS_ALIGNED((unsigned long)obj->iopgd, IOPGD_TABLE_SIZE)); ++ ++ dev_info(&pdev->dev, "%s registered\n", obj->name); ++ return 0; ++ ++err_pgd: ++ free_irq(irq, obj); ++err_irq: ++ release_mem_region(res->start, resource_size(res)); ++ iounmap(obj->regbase); ++err_mem: ++ clk_put(obj->clk); ++err_clk: ++ kfree(obj); ++ return err; ++} ++ ++static int __devexit omap_iommu_remove(struct platform_device *pdev) ++{ ++ int irq; ++ struct resource *res; ++ struct iommu *obj = platform_get_drvdata(pdev); ++ ++ platform_set_drvdata(pdev, NULL); ++ ++ iopgtable_clear_entry_all(obj); ++ free_pages((unsigned long)obj->iopgd, get_order(IOPGD_TABLE_SIZE)); ++ ++ irq = platform_get_irq(pdev, 0); ++ free_irq(irq, obj); ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ release_mem_region(res->start, resource_size(res)); ++ iounmap(obj->regbase); ++ ++ clk_put(obj->clk); ++ dev_info(&pdev->dev, "%s removed\n", obj->name); ++ kfree(obj); ++ return 0; ++} ++ ++static struct platform_driver omap_iommu_driver = { ++ .probe = omap_iommu_probe, ++ .remove = __devexit_p(omap_iommu_remove), ++ .driver = { ++ .name = "omap-iommu", ++ }, ++}; ++ ++static void iopte_cachep_ctor(void *iopte) ++{ ++ clean_dcache_area(iopte, IOPTE_TABLE_SIZE); ++} ++ ++static int __init omap_iommu_init(void) ++{ ++ struct kmem_cache *p; ++ const unsigned long flags = SLAB_HWCACHE_ALIGN; ++ ++ p = kmem_cache_create("iopte_cache", IOPTE_TABLE_SIZE, 0, flags, ++ iopte_cachep_ctor); ++ if (!p) ++ return -ENOMEM; ++ iopte_cachep = p; ++ ++ return platform_driver_register(&omap_iommu_driver); ++} ++module_init(omap_iommu_init); ++ ++static void __exit omap_iommu_exit(void) ++{ ++ kmem_cache_destroy(iopte_cachep); ++ ++ platform_driver_unregister(&omap_iommu_driver); ++} ++module_exit(omap_iommu_exit); ++ ++MODULE_DESCRIPTION("omap iommu: tlb and pagetable primitives"); ++MODULE_ALIAS("platform:omap-iommu"); ++MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi"); ++MODULE_LICENSE("GPL v2"); +diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/iopgtable.h +new file mode 100644 +index 0000000..37dac43 +--- /dev/null ++++ b/arch/arm/plat-omap/iopgtable.h +@@ -0,0 +1,72 @@ ++/* ++ * omap iommu: pagetable definitions ++ * ++ * Copyright (C) 2008-2009 Nokia Corporation ++ * ++ * Written by Hiroshi DOYU ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef __PLAT_OMAP_IOMMU_H ++#define __PLAT_OMAP_IOMMU_H ++ ++#define IOPGD_SHIFT 20 ++#define IOPGD_SIZE (1 << IOPGD_SHIFT) ++#define IOPGD_MASK (~(IOPGD_SIZE - 1)) ++#define IOSECTION_MASK IOPGD_MASK ++#define PTRS_PER_IOPGD (1 << (32 - IOPGD_SHIFT)) ++#define IOPGD_TABLE_SIZE (PTRS_PER_IOPGD * sizeof(u32)) ++ ++#define IOSUPER_SIZE (IOPGD_SIZE << 4) ++#define IOSUPER_MASK (~(IOSUPER_SIZE - 1)) ++ ++#define IOPTE_SHIFT 12 ++#define IOPTE_SIZE (1 << IOPTE_SHIFT) ++#define IOPTE_MASK (~(IOPTE_SIZE - 1)) ++#define IOPAGE_MASK IOPTE_MASK ++#define PTRS_PER_IOPTE (1 << (IOPGD_SHIFT - IOPTE_SHIFT)) ++#define IOPTE_TABLE_SIZE (PTRS_PER_IOPTE * sizeof(u32)) ++ ++#define IOLARGE_SIZE (IOPTE_SIZE << 4) ++#define IOLARGE_MASK (~(IOLARGE_SIZE - 1)) ++ ++#define IOPGD_TABLE (1 << 0) ++#define IOPGD_SECTION (2 << 0) ++#define IOPGD_SUPER (1 << 18 | 2 << 0) ++ ++#define IOPTE_SMALL (2 << 0) ++#define IOPTE_LARGE (1 << 0) ++ ++#define iopgd_index(da) (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1)) ++#define iopgd_offset(obj, da) ((obj)->iopgd + iopgd_index(da)) ++ ++#define iopte_paddr(iopgd) (*iopgd & ~((1 << 10) - 1)) ++#define iopte_vaddr(iopgd) ((u32 *)phys_to_virt(iopte_paddr(iopgd))) ++ ++#define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1)) ++#define iopte_offset(iopgd, da) (iopte_vaddr(iopgd) + iopte_index(da)) ++ ++static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa, ++ u32 flags) ++{ ++ memset(e, 0, sizeof(*e)); ++ ++ e->da = da; ++ e->pa = pa; ++ e->valid = 1; ++ /* FIXME: add OMAP1 support */ ++ e->pgsz = flags & MMU_CAM_PGSZ_MASK; ++ e->endian = flags & MMU_RAM_ENDIAN_MASK; ++ e->elsz = flags & MMU_RAM_ELSZ_MASK; ++ e->mixed = flags & MMU_RAM_MIXED_MASK; ++ ++ return iopgsz_to_bytes(e->pgsz); ++} ++ ++#define to_iommu(dev) \ ++ (struct iommu *)platform_get_drvdata(to_platform_device(dev)) ++ ++#endif /* __PLAT_OMAP_IOMMU_H */ +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0002-omap-iommu-omap2-architecture-specific-functions.patch b/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0002-omap-iommu-omap2-architecture-specific-functions.patch new file mode 100644 index 000000000..d5f78dd14 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0002-omap-iommu-omap2-architecture-specific-functions.patch @@ -0,0 +1,453 @@ +From c79d7959c45f40e47520aa6acd54c19094754787 Mon Sep 17 00:00:00 2001 +From: Hiroshi DOYU +Date: Mon, 26 Jan 2009 15:13:45 +0200 +Subject: [PATCH] omap iommu: omap2 architecture specific functions + +The structure 'arch_mmu' accommodates the difference between omap1 and +omap2/3. + +This patch provides omap2/3 specific functions + +Signed-off-by: Hiroshi DOYU +--- + arch/arm/mach-omap2/iommu2.c | 326 ++++++++++++++++++++++++++++++ + arch/arm/plat-omap/include/mach/iommu2.h | 94 +++++++++ + 2 files changed, 420 insertions(+), 0 deletions(-) + create mode 100644 arch/arm/mach-omap2/iommu2.c + create mode 100644 arch/arm/plat-omap/include/mach/iommu2.h + +diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c +new file mode 100644 +index 0000000..88a44f1 +--- /dev/null ++++ b/arch/arm/mach-omap2/iommu2.c +@@ -0,0 +1,326 @@ ++/* ++ * omap iommu: omap2/3 architecture specific functions ++ * ++ * Copyright (C) 2008-2009 Nokia Corporation ++ * ++ * Written by Hiroshi DOYU , ++ * Paul Mundt and Toshihiro Kobayashi ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include ++#include ++ ++/* ++ * omap2 architecture specific register bit definitions ++ */ ++#define IOMMU_ARCH_VERSION 0x00000011 ++ ++/* SYSCONF */ ++#define MMU_SYS_IDLE_SHIFT 3 ++#define MMU_SYS_IDLE_FORCE (0 << MMU_SYS_IDLE_SHIFT) ++#define MMU_SYS_IDLE_NONE (1 << MMU_SYS_IDLE_SHIFT) ++#define MMU_SYS_IDLE_SMART (2 << MMU_SYS_IDLE_SHIFT) ++#define MMU_SYS_IDLE_MASK (3 << MMU_SYS_IDLE_SHIFT) ++ ++#define MMU_SYS_SOFTRESET (1 << 1) ++#define MMU_SYS_AUTOIDLE 1 ++ ++/* SYSSTATUS */ ++#define MMU_SYS_RESETDONE 1 ++ ++/* IRQSTATUS & IRQENABLE */ ++#define MMU_IRQ_MULTIHITFAULT (1 << 4) ++#define MMU_IRQ_TABLEWALKFAULT (1 << 3) ++#define MMU_IRQ_EMUMISS (1 << 2) ++#define MMU_IRQ_TRANSLATIONFAULT (1 << 1) ++#define MMU_IRQ_TLBMISS (1 << 0) ++#define MMU_IRQ_MASK \ ++ (MMU_IRQ_MULTIHITFAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_EMUMISS | \ ++ MMU_IRQ_TRANSLATIONFAULT) ++ ++/* MMU_CNTL */ ++#define MMU_CNTL_SHIFT 1 ++#define MMU_CNTL_MASK (7 << MMU_CNTL_SHIFT) ++#define MMU_CNTL_EML_TLB (1 << 3) ++#define MMU_CNTL_TWL_EN (1 << 2) ++#define MMU_CNTL_MMU_EN (1 << 1) ++ ++#define get_cam_va_mask(pgsz) \ ++ (((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 : \ ++ ((pgsz) == MMU_CAM_PGSZ_1M) ? 0xfff00000 : \ ++ ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \ ++ ((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0) ++ ++static int omap2_iommu_enable(struct iommu *obj) ++{ ++ u32 l, pa; ++ unsigned long timeout; ++ ++ if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd, SZ_16K)) ++ return -EINVAL; ++ ++ pa = virt_to_phys(obj->iopgd); ++ if (!IS_ALIGNED(pa, SZ_16K)) ++ return -EINVAL; ++ ++ iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG); ++ ++ timeout = jiffies + msecs_to_jiffies(20); ++ do { ++ l = iommu_read_reg(obj, MMU_SYSSTATUS); ++ if (l & MMU_SYS_RESETDONE) ++ break; ++ } while (time_after(jiffies, timeout)); ++ ++ if (!(l & MMU_SYS_RESETDONE)) { ++ dev_err(obj->dev, "can't take mmu out of reset\n"); ++ return -ENODEV; ++ } ++ ++ l = iommu_read_reg(obj, MMU_REVISION); ++ dev_info(obj->dev, "%s: version %d.%d\n", obj->name, ++ (l >> 4) & 0xf, l & 0xf); ++ ++ l = iommu_read_reg(obj, MMU_SYSCONFIG); ++ l &= ~MMU_SYS_IDLE_MASK; ++ l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE); ++ iommu_write_reg(obj, l, MMU_SYSCONFIG); ++ ++ iommu_write_reg(obj, MMU_IRQ_MASK, MMU_IRQENABLE); ++ iommu_write_reg(obj, pa, MMU_TTB); ++ ++ l = iommu_read_reg(obj, MMU_CNTL); ++ l &= ~MMU_CNTL_MASK; ++ l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN); ++ iommu_write_reg(obj, l, MMU_CNTL); ++ ++ return 0; ++} ++ ++static void omap2_iommu_disable(struct iommu *obj) ++{ ++ u32 l = iommu_read_reg(obj, MMU_CNTL); ++ ++ l &= ~MMU_CNTL_MASK; ++ iommu_write_reg(obj, l, MMU_CNTL); ++ iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG); ++ ++ dev_dbg(obj->dev, "%s is shutting down\n", obj->name); ++} ++ ++static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra) ++{ ++ int i; ++ u32 stat, da; ++ const char *err_msg[] = { ++ "tlb miss", ++ "translation fault", ++ "emulation miss", ++ "table walk fault", ++ "multi hit fault", ++ }; ++ ++ stat = iommu_read_reg(obj, MMU_IRQSTATUS); ++ stat &= MMU_IRQ_MASK; ++ if (!stat) ++ return 0; ++ ++ da = iommu_read_reg(obj, MMU_FAULT_AD); ++ *ra = da; ++ ++ dev_err(obj->dev, "%s:\tda:%08x ", __func__, da); ++ ++ for (i = 0; i < ARRAY_SIZE(err_msg); i++) { ++ if (stat & (1 << i)) ++ printk("%s ", err_msg[i]); ++ } ++ printk("\n"); ++ ++ iommu_write_reg(obj, stat, MMU_IRQSTATUS); ++ return stat; ++} ++ ++static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr) ++{ ++ cr->cam = iommu_read_reg(obj, MMU_READ_CAM); ++ cr->ram = iommu_read_reg(obj, MMU_READ_RAM); ++} ++ ++static void omap2_tlb_load_cr(struct iommu *obj, struct cr_regs *cr) ++{ ++ iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM); ++ iommu_write_reg(obj, cr->ram, MMU_RAM); ++} ++ ++static u32 omap2_cr_to_virt(struct cr_regs *cr) ++{ ++ u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK; ++ u32 mask = get_cam_va_mask(cr->cam & page_size); ++ ++ return cr->cam & mask; ++} ++ ++static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e) ++{ ++ struct cr_regs *cr; ++ ++ if (e->da & ~(get_cam_va_mask(e->pgsz))) { ++ dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__, ++ e->da); ++ return ERR_PTR(-EINVAL); ++ } ++ ++ cr = kmalloc(sizeof(*cr), GFP_KERNEL); ++ if (!cr) ++ return ERR_PTR(-ENOMEM); ++ ++ cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz; ++ cr->ram = e->pa | e->endian | e->elsz | e->mixed; ++ ++ return cr; ++} ++ ++static inline int omap2_cr_valid(struct cr_regs *cr) ++{ ++ return cr->cam & MMU_CAM_V; ++} ++ ++static u32 omap2_get_pte_attr(struct iotlb_entry *e) ++{ ++ u32 attr; ++ ++ attr = e->mixed << 5; ++ attr |= e->endian; ++ attr |= e->elsz >> 3; ++ attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6); ++ ++ return attr; ++} ++ ++static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf) ++{ ++ char *p = buf; ++ ++ /* FIXME: Need more detail analysis of cam/ram */ ++ p += sprintf(p, "%08x %08x\n", cr->cam, cr->ram); ++ ++ return p - buf; ++} ++ ++#define pr_reg(name) \ ++ p += sprintf(p, "%20s: %08x\n", \ ++ __stringify(name), iommu_read_reg(obj, MMU_##name)); ++ ++static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf) ++{ ++ char *p = buf; ++ ++ pr_reg(REVISION); ++ pr_reg(SYSCONFIG); ++ pr_reg(SYSSTATUS); ++ pr_reg(IRQSTATUS); ++ pr_reg(IRQENABLE); ++ pr_reg(WALKING_ST); ++ pr_reg(CNTL); ++ pr_reg(FAULT_AD); ++ pr_reg(TTB); ++ pr_reg(LOCK); ++ pr_reg(LD_TLB); ++ pr_reg(CAM); ++ pr_reg(RAM); ++ pr_reg(GFLUSH); ++ pr_reg(FLUSH_ENTRY); ++ pr_reg(READ_CAM); ++ pr_reg(READ_RAM); ++ pr_reg(EMU_FAULT_AD); ++ ++ return p - buf; ++} ++ ++static void omap2_iommu_save_ctx(struct iommu *obj) ++{ ++ int i; ++ u32 *p = obj->ctx; ++ ++ for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) { ++ p[i] = iommu_read_reg(obj, i * sizeof(u32)); ++ dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]); ++ } ++ ++ BUG_ON(p[0] != IOMMU_ARCH_VERSION); ++} ++ ++static void omap2_iommu_restore_ctx(struct iommu *obj) ++{ ++ int i; ++ u32 *p = obj->ctx; ++ ++ for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) { ++ iommu_write_reg(obj, p[i], i * sizeof(u32)); ++ dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]); ++ } ++ ++ BUG_ON(p[0] != IOMMU_ARCH_VERSION); ++} ++ ++static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e) ++{ ++ e->da = cr->cam & MMU_CAM_VATAG_MASK; ++ e->pa = cr->ram & MMU_RAM_PADDR_MASK; ++ e->valid = cr->cam & MMU_CAM_V; ++ e->pgsz = cr->cam & MMU_CAM_PGSZ_MASK; ++ e->endian = cr->ram & MMU_RAM_ENDIAN_MASK; ++ e->elsz = cr->ram & MMU_RAM_ELSZ_MASK; ++ e->mixed = cr->ram & MMU_RAM_MIXED; ++} ++ ++static const struct iommu_functions omap2_iommu_ops = { ++ .version = IOMMU_ARCH_VERSION, ++ ++ .enable = omap2_iommu_enable, ++ .disable = omap2_iommu_disable, ++ .fault_isr = omap2_iommu_fault_isr, ++ ++ .tlb_read_cr = omap2_tlb_read_cr, ++ .tlb_load_cr = omap2_tlb_load_cr, ++ ++ .cr_to_e = omap2_cr_to_e, ++ .cr_to_virt = omap2_cr_to_virt, ++ .alloc_cr = omap2_alloc_cr, ++ .cr_valid = omap2_cr_valid, ++ .dump_cr = omap2_dump_cr, ++ ++ .get_pte_attr = omap2_get_pte_attr, ++ ++ .save_ctx = omap2_iommu_save_ctx, ++ .restore_ctx = omap2_iommu_restore_ctx, ++ .dump_ctx = omap2_iommu_dump_ctx, ++}; ++ ++static int __init omap2_iommu_init(void) ++{ ++ return install_iommu_arch(&omap2_iommu_ops); ++} ++module_init(omap2_iommu_init); ++ ++static void __exit omap2_iommu_exit(void) ++{ ++ uninstall_iommu_arch(&omap2_iommu_ops); ++} ++module_exit(omap2_iommu_exit); ++ ++MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi"); ++MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions"); ++MODULE_LICENSE("GPL v2"); +diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/mach/iommu2.h +new file mode 100644 +index 0000000..d746047 +--- /dev/null ++++ b/arch/arm/plat-omap/include/mach/iommu2.h +@@ -0,0 +1,94 @@ ++/* ++ * omap iommu: omap2 architecture specific definitions ++ * ++ * Copyright (C) 2008-2009 Nokia Corporation ++ * ++ * Written by Hiroshi DOYU ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef __MACH_IOMMU2_H ++#define __MACH_IOMMU2_H ++ ++/* ++ * MMU Register offsets ++ */ ++#define MMU_REVISION 0x00 ++#define MMU_SYSCONFIG 0x10 ++#define MMU_SYSSTATUS 0x14 ++#define MMU_IRQSTATUS 0x18 ++#define MMU_IRQENABLE 0x1c ++#define MMU_WALKING_ST 0x40 ++#define MMU_CNTL 0x44 ++#define MMU_FAULT_AD 0x48 ++#define MMU_TTB 0x4c ++#define MMU_LOCK 0x50 ++#define MMU_LD_TLB 0x54 ++#define MMU_CAM 0x58 ++#define MMU_RAM 0x5c ++#define MMU_GFLUSH 0x60 ++#define MMU_FLUSH_ENTRY 0x64 ++#define MMU_READ_CAM 0x68 ++#define MMU_READ_RAM 0x6c ++#define MMU_EMU_FAULT_AD 0x70 ++ ++#define MMU_REG_SIZE 256 ++ ++/* ++ * MMU Register bit definitions ++ */ ++#define MMU_LOCK_BASE_SHIFT 10 ++#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT) ++#define MMU_LOCK_BASE(x) \ ++ ((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT) ++ ++#define MMU_LOCK_VICT_SHIFT 4 ++#define MMU_LOCK_VICT_MASK (0x1f << MMU_LOCK_VICT_SHIFT) ++#define MMU_LOCK_VICT(x) \ ++ ((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT) ++ ++#define MMU_CAM_VATAG_SHIFT 12 ++#define MMU_CAM_VATAG_MASK \ ++ ((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT) ++#define MMU_CAM_P (1 << 3) ++#define MMU_CAM_V (1 << 2) ++#define MMU_CAM_PGSZ_MASK 3 ++#define MMU_CAM_PGSZ_1M (0 << 0) ++#define MMU_CAM_PGSZ_64K (1 << 0) ++#define MMU_CAM_PGSZ_4K (2 << 0) ++#define MMU_CAM_PGSZ_16M (3 << 0) ++ ++#define MMU_RAM_PADDR_SHIFT 12 ++#define MMU_RAM_PADDR_MASK \ ++ ((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT) ++#define MMU_RAM_ENDIAN_SHIFT 9 ++#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT) ++#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT) ++#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT) ++#define MMU_RAM_ELSZ_SHIFT 7 ++#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT) ++#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT) ++#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT) ++#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT) ++#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT) ++#define MMU_RAM_MIXED_SHIFT 6 ++#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT) ++#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK ++ ++/* ++ * register accessors ++ */ ++static inline u32 iommu_read_reg(struct iommu *obj, size_t offs) ++{ ++ return __raw_readl(obj->regbase + offs); ++} ++ ++static inline void iommu_write_reg(struct iommu *obj, u32 val, size_t offs) ++{ ++ __raw_writel(val, obj->regbase + offs); ++} ++ ++#endif /* __MACH_IOMMU2_H */ +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0003-omap-iommu-omap3-iommu-device-registration.patch b/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0003-omap-iommu-omap3-iommu-device-registration.patch new file mode 100644 index 000000000..2954c4787 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0003-omap-iommu-omap3-iommu-device-registration.patch @@ -0,0 +1,124 @@ +From 6a84082597dd322713c5d5951530e3eecb878ad4 Mon Sep 17 00:00:00 2001 +From: Hiroshi DOYU +Date: Wed, 28 Jan 2009 21:32:04 +0200 +Subject: [PATCH] omap iommu: omap3 iommu device registration + +Signed-off-by: Hiroshi DOYU +--- + arch/arm/mach-omap2/omap3-iommu.c | 104 +++++++++++++++++++++++++++++++++++++ + 1 files changed, 104 insertions(+), 0 deletions(-) + create mode 100644 arch/arm/mach-omap2/omap3-iommu.c + +diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c +new file mode 100644 +index 0000000..97481cc +--- /dev/null ++++ b/arch/arm/mach-omap2/omap3-iommu.c +@@ -0,0 +1,104 @@ ++/* ++ * omap iommu: omap3 device registration ++ * ++ * Copyright (C) 2008-2009 Nokia Corporation ++ * ++ * Written by Hiroshi DOYU ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++ ++#include ++ ++#define OMAP3_MMU1_BASE 0x480bd400 ++#define OMAP3_MMU2_BASE 0x5d000000 ++#define OMAP3_MMU1_IRQ 24 ++#define OMAP3_MMU2_IRQ 28 ++ ++static struct resource omap3_iommu_res[] = { ++ { /* Camera ISP MMU */ ++ .start = OMAP3_MMU1_BASE, ++ .end = OMAP3_MMU1_BASE + MMU_REG_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = OMAP3_MMU1_IRQ, ++ .flags = IORESOURCE_IRQ, ++ }, ++ { /* IVA2.2 MMU */ ++ .start = OMAP3_MMU2_BASE, ++ .end = OMAP3_MMU2_BASE + MMU_REG_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = OMAP3_MMU2_IRQ, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++#define NR_IOMMU_RES (ARRAY_SIZE(omap3_iommu_res) / 2) ++ ++static const struct iommu_platform_data omap3_iommu_pdata[] __initconst = { ++ { ++ .name = "isp", ++ .nr_tlb_entries = 8, ++ .clk_name = "cam_ick", ++ }, ++ { ++ .name = "iva2", ++ .nr_tlb_entries = 32, ++ .clk_name = "iva2_ck", ++ }, ++}; ++#define NR_IOMMU_DEVICES ARRAY_SIZE(omap3_iommu_pdata) ++ ++static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES]; ++ ++static int __init omap3_iommu_init(void) ++{ ++ int i, err; ++ ++ for (i = 0; i < NR_IOMMU_DEVICES; i++) { ++ struct platform_device *pdev; ++ ++ pdev = platform_device_alloc("omap-iommu", i + 1); ++ if (!pdev) ++ goto err_out; ++ err = platform_device_add_resources(pdev, ++ &omap3_iommu_res[2 * i], NR_IOMMU_RES); ++ if (err) ++ goto err_out; ++ err = platform_device_add_data(pdev, &omap3_iommu_pdata[i], ++ sizeof(omap3_iommu_pdata[0])); ++ if (err) ++ goto err_out; ++ err = platform_device_add(pdev); ++ if (err) ++ goto err_out; ++ omap3_iommu_pdev[i] = pdev; ++ } ++ return 0; ++ ++err_out: ++ while (i--) ++ platform_device_put(omap3_iommu_pdev[i]); ++ return err; ++} ++module_init(omap3_iommu_init); ++ ++static void __exit omap3_iommu_exit(void) ++{ ++ int i; ++ ++ for (i = 0; i < NR_IOMMU_DEVICES; i++) ++ platform_device_unregister(omap3_iommu_pdev[i]); ++} ++module_exit(omap3_iommu_exit); ++ ++MODULE_AUTHOR("Hiroshi DOYU"); ++MODULE_DESCRIPTION("omap iommu: omap3 device registration"); ++MODULE_LICENSE("GPL v2"); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0004-omap-iommu-simple-virtual-address-space-management.patch b/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0004-omap-iommu-simple-virtual-address-space-management.patch new file mode 100644 index 000000000..945778b94 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0004-omap-iommu-simple-virtual-address-space-management.patch @@ -0,0 +1,1083 @@ +From 07365182b998af3dc2b79e822b8e21a3f50262c4 Mon Sep 17 00:00:00 2001 +From: Hiroshi DOYU +Date: Wed, 28 Jan 2009 21:32:08 +0200 +Subject: [PATCH] omap iommu: simple virtual address space management + +This patch provides a device drivers, which has a omap iommu, with +address mapping APIs between device virtual address(iommu), physical +address and MPU virtual address. + +There are 4 possible patterns for iommu virtual address(iova/da) mapping. + + |iova/ mapping iommu_ page + | da pa va (d)-(p)-(v) function type + --------------------------------------------------------------------------- + 1 | c c c 1 - 1 - 1 _kmap() / _kunmap() s + 2 | c c,a c 1 - 1 - 1 _kmalloc()/ _kfree() s + 3 | c d c 1 - n - 1 _vmap() / _vunmap() s + 4 | c d,a c 1 - n - 1 _vmalloc()/ _vfree() n* + + 'iova': device iommu virtual address + 'da': alias of 'iova' + 'pa': physical address + 'va': mpu virtual address + + 'c': contiguous memory area + 'd': dicontiguous memory area + 'a': anonymous memory allocation + '()': optional feature + + 'n': a normal page(4KB) size is used. + 's': multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used. + + '*': not yet, but feasible. + +Signed-off-by: Hiroshi DOYU +--- + arch/arm/include/asm/io.h | 6 + + arch/arm/mm/ioremap.c | 11 + + arch/arm/plat-omap/include/mach/iovmm.h | 94 ++++ + arch/arm/plat-omap/iovmm.c | 891 +++++++++++++++++++++++++++++++ + 4 files changed, 1002 insertions(+), 0 deletions(-) + create mode 100644 arch/arm/plat-omap/include/mach/iovmm.h + create mode 100644 arch/arm/plat-omap/iovmm.c + +diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h +index d2a59cf..cbdadfe 100644 +--- a/arch/arm/include/asm/io.h ++++ b/arch/arm/include/asm/io.h +@@ -75,6 +75,12 @@ extern void __iomem * __arm_ioremap(unsigned long, size_t, unsigned int); + extern void __iounmap(volatile void __iomem *addr); + + /* ++ * external interface to remap single page with appropriate type ++ */ ++extern int ioremap_page(unsigned long virt, unsigned long phys, ++ unsigned int mtype); ++ ++/* + * Bad read/write accesses... + */ + extern void __readwrite_bug(const char *fn); +diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c +index 9f88dd3..8441351 100644 +--- a/arch/arm/mm/ioremap.c ++++ b/arch/arm/mm/ioremap.c +@@ -110,6 +110,17 @@ static int remap_area_pages(unsigned long start, unsigned long pfn, + return err; + } + ++int ioremap_page(unsigned long virt, unsigned long phys, unsigned int mtype) ++{ ++ const struct mem_type *type; ++ ++ type = get_mem_type(mtype); ++ if (!type) ++ return -EINVAL; ++ ++ return remap_area_pages(virt, __phys_to_pfn(phys), PAGE_SIZE, type); ++} ++EXPORT_SYMBOL(ioremap_page); + + void __check_kvm_seq(struct mm_struct *mm) + { +diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/mach/iovmm.h +new file mode 100644 +index 0000000..bdc7ce5 +--- /dev/null ++++ b/arch/arm/plat-omap/include/mach/iovmm.h +@@ -0,0 +1,94 @@ ++/* ++ * omap iommu: simple virtual address space management ++ * ++ * Copyright (C) 2008-2009 Nokia Corporation ++ * ++ * Written by Hiroshi DOYU ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef __IOMMU_MMAP_H ++#define __IOMMU_MMAP_H ++ ++struct iovm_struct { ++ struct iommu *iommu; /* iommu object which this belongs to */ ++ u32 da_start; /* area definition */ ++ u32 da_end; ++ u32 flags; /* IOVMF_: see below */ ++ struct list_head list; /* linked in ascending order */ ++ const struct sg_table *sgt; /* keep 'page' <-> 'da' mapping */ ++ void *va; /* mpu side mapped address */ ++}; ++ ++/* ++ * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma) ++ * ++ * lower 16 bit is used for h/w and upper 16 bit is for s/w. ++ */ ++#define IOVMF_SW_SHIFT 16 ++#define IOVMF_HW_SIZE (1 << IOVMF_SW_SHIFT) ++#define IOVMF_HW_MASK (IOVMF_HW_SIZE - 1) ++#define IOVMF_SW_MASK (~IOVMF_HW_MASK)UL ++ ++/* ++ * iovma: h/w flags derived from cam and ram attribute ++ */ ++#define IOVMF_CAM_MASK (~((1 << 10) - 1)) ++#define IOVMF_RAM_MASK (~IOVMF_CAM_MASK) ++ ++#define IOVMF_PGSZ_MASK (3 << 0) ++#define IOVMF_PGSZ_1M MMU_CAM_PGSZ_1M ++#define IOVMF_PGSZ_64K MMU_CAM_PGSZ_64K ++#define IOVMF_PGSZ_4K MMU_CAM_PGSZ_4K ++#define IOVMF_PGSZ_16M MMU_CAM_PGSZ_16M ++ ++#define IOVMF_ENDIAN_MASK (1 << 9) ++#define IOVMF_ENDIAN_BIG MMU_RAM_ENDIAN_BIG ++#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE ++ ++#define IOVMF_ELSZ_MASK (3 << 7) ++#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8 ++#define IOVMF_ELSZ_16 MMU_RAM_ELSZ_16 ++#define IOVMF_ELSZ_32 MMU_RAM_ELSZ_32 ++#define IOVMF_ELSZ_NONE MMU_RAM_ELSZ_NONE ++ ++#define IOVMF_MIXED_MASK (1 << 6) ++#define IOVMF_MIXED MMU_RAM_MIXED ++ ++/* ++ * iovma: s/w flags, used for mapping and umapping internally. ++ */ ++#define IOVMF_MMIO (1 << IOVMF_SW_SHIFT) ++#define IOVMF_ALLOC (2 << IOVMF_SW_SHIFT) ++#define IOVMF_ALLOC_MASK (3 << IOVMF_SW_SHIFT) ++ ++/* "superpages" is supported just with physically linear pages */ ++#define IOVMF_DISCONT (1 << (2 + IOVMF_SW_SHIFT)) ++#define IOVMF_LINEAR (2 << (2 + IOVMF_SW_SHIFT)) ++#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT)) ++ ++#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT)) ++#define IOVMF_DA_ANON (2 << (4 + IOVMF_SW_SHIFT)) ++#define IOVMF_DA_MASK (3 << (4 + IOVMF_SW_SHIFT)) ++ ++ ++extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da); ++extern u32 iommu_vmap(struct iommu *obj, u32 da, ++ const struct sg_table *sgt, u32 flags); ++extern struct sg_table *iommu_vunmap(struct iommu *obj, u32 da); ++extern u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, ++ u32 flags); ++extern void iommu_vfree(struct iommu *obj, const u32 da); ++extern u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes, ++ u32 flags); ++extern void iommu_kunmap(struct iommu *obj, u32 da); ++extern u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, ++ u32 flags); ++extern void iommu_kfree(struct iommu *obj, u32 da); ++ ++extern void *da_to_va(struct iommu *obj, u32 da); ++ ++#endif /* __IOMMU_MMAP_H */ +diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c +new file mode 100644 +index 0000000..6726d10 +--- /dev/null ++++ b/arch/arm/plat-omap/iovmm.c +@@ -0,0 +1,891 @@ ++/* ++ * omap iommu: simple virtual address space management ++ * ++ * Copyright (C) 2008-2009 Nokia Corporation ++ * ++ * Written by Hiroshi DOYU ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++ ++#include "iopgtable.h" ++ ++/* ++ * A device driver needs to create address mappings between: ++ * ++ * - iommu/device address ++ * - physical address ++ * - mpu virtual address ++ * ++ * There are 4 possible patterns for them: ++ * ++ * |iova/ mapping iommu_ page ++ * | da pa va (d)-(p)-(v) function type ++ * --------------------------------------------------------------------------- ++ * 1 | c c c 1 - 1 - 1 _kmap() / _kunmap() s ++ * 2 | c c,a c 1 - 1 - 1 _kmalloc()/ _kfree() s ++ * 3 | c d c 1 - n - 1 _vmap() / _vunmap() s ++ * 4 | c d,a c 1 - n - 1 _vmalloc()/ _vfree() n* ++ * ++ * ++ * 'iova': device iommu virtual address ++ * 'da': alias of 'iova' ++ * 'pa': physical address ++ * 'va': mpu virtual address ++ * ++ * 'c': contiguous memory area ++ * 'd': dicontiguous memory area ++ * 'a': anonymous memory allocation ++ * '()': optional feature ++ * ++ * 'n': a normal page(4KB) size is used. ++ * 's': multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used. ++ * ++ * '*': not yet, but feasible. ++ */ ++ ++static struct kmem_cache *iovm_area_cachep; ++ ++/* return total bytes of sg buffers */ ++static size_t sgtable_len(const struct sg_table *sgt) ++{ ++ unsigned int i, total = 0; ++ struct scatterlist *sg; ++ ++ if (!sgt) ++ return 0; ++ ++ for_each_sg(sgt->sgl, sg, sgt->nents, i) { ++ size_t bytes; ++ ++ bytes = sg_dma_len(sg); ++ ++ if (!iopgsz_ok(bytes)) { ++ pr_err("%s: sg[%d] not iommu pagesize(%x)\n", ++ __func__, i, bytes); ++ return 0; ++ } ++ ++ total += bytes; ++ } ++ ++ return total; ++} ++#define sgtable_ok(x) (!!sgtable_len(x)) ++ ++/* ++ * calculate the optimal number sg elements from total bytes based on ++ * iommu superpages ++ */ ++static unsigned int sgtable_nents(size_t bytes) ++{ ++ int i; ++ unsigned int nr_entries; ++ const unsigned long pagesize[] = { SZ_16M, SZ_1M, SZ_64K, SZ_4K, }; ++ ++ if (!IS_ALIGNED(bytes, PAGE_SIZE)) { ++ pr_err("%s: wrong size %08x\n", __func__, bytes); ++ return 0; ++ } ++ ++ nr_entries = 0; ++ for (i = 0; i < ARRAY_SIZE(pagesize); i++) { ++ if (bytes >= pagesize[i]) { ++ nr_entries += (bytes / pagesize[i]); ++ bytes %= pagesize[i]; ++ } ++ } ++ BUG_ON(bytes); ++ ++ return nr_entries; ++} ++ ++/* allocate and initialize sg_table header(a kind of 'superblock') */ ++static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags) ++{ ++ unsigned int nr_entries; ++ int err; ++ struct sg_table *sgt; ++ ++ if (!bytes) ++ return ERR_PTR(-EINVAL); ++ ++ if (!IS_ALIGNED(bytes, PAGE_SIZE)) ++ return ERR_PTR(-EINVAL); ++ ++ /* FIXME: IOVMF_DA_FIXED should support 'superpages' */ ++ if ((flags & IOVMF_LINEAR) && (flags & IOVMF_DA_ANON)) { ++ nr_entries = sgtable_nents(bytes); ++ if (!nr_entries) ++ return ERR_PTR(-EINVAL); ++ } else ++ nr_entries = bytes / PAGE_SIZE; ++ ++ sgt = kzalloc(sizeof(*sgt), GFP_KERNEL); ++ if (!sgt) ++ return ERR_PTR(-ENOMEM); ++ ++ err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL); ++ if (err) ++ return ERR_PTR(err); ++ ++ pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries); ++ ++ return sgt; ++} ++ ++/* free sg_table header(a kind of superblock) */ ++static void sgtable_free(struct sg_table *sgt) ++{ ++ if (!sgt) ++ return; ++ ++ sg_free_table(sgt); ++ kfree(sgt); ++ ++ pr_debug("%s: sgt:%p\n", __func__, sgt); ++} ++ ++/* map 'sglist' to a contiguous mpu virtual area and return 'va' */ ++static void *vmap_sg(const struct sg_table *sgt) ++{ ++ u32 va; ++ size_t total; ++ unsigned int i; ++ struct scatterlist *sg; ++ struct vm_struct *new; ++ ++ total = sgtable_len(sgt); ++ if (!total) ++ return ERR_PTR(-EINVAL); ++ ++ new = __get_vm_area(total, VM_IOREMAP, VMALLOC_START, VMALLOC_END); ++ if (!new) ++ return ERR_PTR(-ENOMEM); ++ va = (u32)new->addr; ++ ++ for_each_sg(sgt->sgl, sg, sgt->nents, i) { ++ size_t bytes; ++ u32 pa; ++ int err; ++ ++ pa = sg_phys(sg); ++ bytes = sg_dma_len(sg); ++ ++ BUG_ON(bytes != PAGE_SIZE); ++ ++ err = ioremap_page(va, pa, MT_DEVICE); ++ if (err) ++ goto err_out; ++ ++ va += bytes; ++ } ++ ++ flush_cache_vmap(new->addr, total); ++ return new->addr; ++ ++err_out: ++ WARN_ON(1); /* FIXME: cleanup some mpu mappings */ ++ vunmap(new->addr); ++ return ERR_PTR(-EAGAIN); ++} ++ ++static inline void vunmap_sg(const void *va) ++{ ++ vunmap(va); ++} ++ ++static struct iovm_struct *__find_iovm_area(struct iommu *obj, const u32 da) ++{ ++ struct iovm_struct *tmp; ++ ++ list_for_each_entry(tmp, &obj->mmap, list) { ++ if ((da >= tmp->da_start) && (da < tmp->da_end)) { ++ size_t len; ++ ++ len = tmp->da_end - tmp->da_start; ++ ++ dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", ++ __func__, tmp->da_start, da, tmp->da_end, len, ++ tmp->flags); ++ ++ return tmp; ++ } ++ } ++ ++ return NULL; ++} ++ ++/** ++ * find_iovm_area - find iovma which includes @da ++ * @da: iommu device virtual address ++ * ++ * Find the existing iovma starting at @da ++ */ ++struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da) ++{ ++ struct iovm_struct *area; ++ ++ mutex_lock(&obj->mmap_lock); ++ area = __find_iovm_area(obj, da); ++ mutex_unlock(&obj->mmap_lock); ++ ++ return area; ++} ++EXPORT_SYMBOL_GPL(find_iovm_area); ++ ++/* ++ * This finds the hole(area) which fits the requested address and len ++ * in iovmas mmap, and returns the new allocated iovma. ++ */ ++static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da, ++ size_t bytes, u32 flags) ++{ ++ struct iovm_struct *new, *tmp; ++ u32 start, prev_end, alignement; ++ ++ if (!obj || !bytes) ++ return ERR_PTR(-EINVAL); ++ ++ start = da; ++ alignement = PAGE_SIZE; ++ ++ if (flags & IOVMF_DA_ANON) { ++ /* ++ * Reserve the first page for NULL ++ */ ++ start = PAGE_SIZE; ++ if (flags & IOVMF_LINEAR) ++ alignement = iopgsz_max(bytes); ++ start = roundup(start, alignement); ++ } ++ ++ tmp = NULL; ++ if (list_empty(&obj->mmap)) ++ goto found; ++ ++ prev_end = 0; ++ list_for_each_entry(tmp, &obj->mmap, list) { ++ ++ if ((prev_end <= start) && (start + bytes < tmp->da_start)) ++ goto found; ++ ++ if (flags & IOVMF_DA_ANON) ++ start = roundup(tmp->da_end, alignement); ++ ++ prev_end = tmp->da_end; ++ } ++ ++ if ((start >= prev_end) && (ULONG_MAX - start >= bytes)) ++ goto found; ++ ++ dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n", ++ __func__, da, bytes, flags); ++ ++ return ERR_PTR(-EINVAL); ++ ++found: ++ new = kmem_cache_zalloc(iovm_area_cachep, GFP_KERNEL); ++ if (!new) ++ return ERR_PTR(-ENOMEM); ++ ++ new->iommu = obj; ++ new->da_start = start; ++ new->da_end = start + bytes; ++ new->flags = flags; ++ ++ /* ++ * keep ascending order of iovmas ++ */ ++ if (tmp) ++ list_add_tail(&new->list, &tmp->list); ++ else ++ list_add(&new->list, &obj->mmap); ++ ++ dev_dbg(obj->dev, "%s: found %08x-%08x-%08x(%x) %08x\n", ++ __func__, new->da_start, start, new->da_end, bytes, flags); ++ ++ return new; ++} ++ ++static void free_iovm_area(struct iommu *obj, struct iovm_struct *area) ++{ ++ size_t bytes; ++ ++ BUG_ON(!obj || !area); ++ ++ bytes = area->da_end - area->da_start; ++ ++ dev_dbg(obj->dev, "%s: %08x-%08x(%x) %08x\n", ++ __func__, area->da_start, area->da_end, bytes, area->flags); ++ ++ list_del(&area->list); ++ kmem_cache_free(iovm_area_cachep, area); ++} ++ ++/** ++ * da_to_va - convert (d) to (v) ++ * @obj: objective iommu ++ * @da: iommu device virtual address ++ * @va: mpu virtual address ++ * ++ * Returns mpu virtual addr which corresponds to a given device virtual addr ++ */ ++void *da_to_va(struct iommu *obj, u32 da) ++{ ++ void *va = NULL; ++ struct iovm_struct *area; ++ ++ mutex_lock(&obj->mmap_lock); ++ ++ area = __find_iovm_area(obj, da); ++ if (!area) { ++ dev_warn(obj->dev, "%s: no da area(%08x)\n", __func__, da); ++ goto out; ++ } ++ va = area->va; ++ mutex_unlock(&obj->mmap_lock); ++out: ++ return va; ++} ++EXPORT_SYMBOL_GPL(da_to_va); ++ ++static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va) ++{ ++ unsigned int i; ++ struct scatterlist *sg; ++ void *va = _va; ++ void *va_end; ++ ++ for_each_sg(sgt->sgl, sg, sgt->nents, i) { ++ struct page *pg; ++ const size_t bytes = PAGE_SIZE; ++ ++ /* ++ * iommu 'superpage' isn't supported with 'iommu_vmalloc()' ++ */ ++ pg = vmalloc_to_page(va); ++ BUG_ON(!pg); ++ sg_set_page(sg, pg, bytes, 0); ++ ++ va += bytes; ++ } ++ ++ va_end = _va + PAGE_SIZE * i; ++ flush_cache_vmap(_va, va_end); ++} ++ ++static inline void sgtable_drain_vmalloc(struct sg_table *sgt) ++{ ++ /* ++ * Actually this is not necessary at all, just exists for ++ * consistency of the code readibility. ++ */ ++ BUG_ON(!sgt); ++} ++ ++static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len) ++{ ++ unsigned int i; ++ struct scatterlist *sg; ++ void *va; ++ ++ va = phys_to_virt(pa); ++ ++ for_each_sg(sgt->sgl, sg, sgt->nents, i) { ++ size_t bytes; ++ ++ bytes = iopgsz_max(len); ++ ++ BUG_ON(!iopgsz_ok(bytes)); ++ ++ sg_set_buf(sg, phys_to_virt(pa), bytes); ++ /* ++ * 'pa' is cotinuous(linear). ++ */ ++ pa += bytes; ++ len -= bytes; ++ } ++ BUG_ON(len); ++ ++ clean_dcache_area(va, len); ++} ++ ++static inline void sgtable_drain_kmalloc(struct sg_table *sgt) ++{ ++ /* ++ * Actually this is not necessary at all, just exists for ++ * consistency of the code readibility ++ */ ++ BUG_ON(!sgt); ++} ++ ++/* create 'da' <-> 'pa' mapping from 'sgt' */ ++static int map_iovm_area(struct iommu *obj, struct iovm_struct *new, ++ const struct sg_table *sgt, u32 flags) ++{ ++ int err; ++ unsigned int i, j; ++ struct scatterlist *sg; ++ u32 da = new->da_start; ++ ++ if (!obj || !new || !sgt) ++ return -EINVAL; ++ ++ BUG_ON(!sgtable_ok(sgt)); ++ ++ for_each_sg(sgt->sgl, sg, sgt->nents, i) { ++ u32 pa; ++ int pgsz; ++ size_t bytes; ++ struct iotlb_entry e; ++ ++ pa = sg_phys(sg); ++ bytes = sg_dma_len(sg); ++ ++ flags &= ~IOVMF_PGSZ_MASK; ++ pgsz = bytes_to_iopgsz(bytes); ++ if (pgsz < 0) ++ goto err_out; ++ flags |= pgsz; ++ ++ pr_debug("%s: [%d] %08x %08x(%x)\n", __func__, ++ i, da, pa, bytes); ++ ++ iotlb_init_entry(&e, da, pa, flags); ++ err = iopgtable_store_entry(obj, &e); ++ if (err) ++ goto err_out; ++ ++ da += bytes; ++ } ++ return 0; ++ ++err_out: ++ da = new->da_start; ++ ++ for_each_sg(sgt->sgl, sg, i, j) { ++ size_t bytes; ++ ++ bytes = iopgtable_clear_entry(obj, da); ++ ++ BUG_ON(!iopgsz_ok(bytes)); ++ ++ da += bytes; ++ } ++ return err; ++} ++ ++/* release 'da' <-> 'pa' mapping */ ++static void unmap_iovm_area(struct iommu *obj, struct iovm_struct *area) ++{ ++ u32 start; ++ size_t total = area->da_end - area->da_start; ++ ++ BUG_ON((!total) || !IS_ALIGNED(total, PAGE_SIZE)); ++ ++ start = area->da_start; ++ while (total > 0) { ++ size_t bytes; ++ ++ bytes = iopgtable_clear_entry(obj, start); ++ if (bytes == 0) ++ bytes = PAGE_SIZE; ++ else ++ dev_dbg(obj->dev, "%s: unmap %08x(%x) %08x\n", ++ __func__, start, bytes, area->flags); ++ ++ BUG_ON(!IS_ALIGNED(bytes, PAGE_SIZE)); ++ ++ total -= bytes; ++ start += bytes; ++ } ++ BUG_ON(total); ++} ++ ++/* template function for all unmapping */ ++static struct sg_table *unmap_vm_area(struct iommu *obj, const u32 da, ++ void (*fn)(const void *), u32 flags) ++{ ++ struct sg_table *sgt = NULL; ++ struct iovm_struct *area; ++ ++ BUG_ON(in_interrupt()); ++ ++ if (!IS_ALIGNED(da, PAGE_SIZE)) { ++ dev_err(obj->dev, "%s: alignment err(%08x)\n", __func__, da); ++ return NULL; ++ } ++ ++ mutex_lock(&obj->mmap_lock); ++ ++ area = __find_iovm_area(obj, da); ++ if (!area) { ++ dev_err(obj->dev, "%s: no da area(%08x)\n", __func__, da); ++ goto out; ++ } ++ ++ if ((area->flags & flags) != flags) { ++ dev_err(obj->dev, "%s: wrong flags(%08x)\n", __func__, ++ area->flags); ++ goto out; ++ } ++ sgt = (struct sg_table *)area->sgt; ++ ++ unmap_iovm_area(obj, area); ++ ++ fn(area->va); ++ ++ dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", __func__, ++ area->da_start, da, area->da_end, ++ area->da_end - area->da_start, area->flags); ++ ++ free_iovm_area(obj, area); ++out: ++ mutex_unlock(&obj->mmap_lock); ++ ++ return sgt; ++} ++ ++static u32 map_iommu_region(struct iommu *obj, u32 da, ++ const struct sg_table *sgt, void *va, size_t bytes, u32 flags) ++{ ++ int err = -ENOMEM; ++ struct iovm_struct *new; ++ ++ mutex_lock(&obj->mmap_lock); ++ ++ new = alloc_iovm_area(obj, da, bytes, flags); ++ if (IS_ERR(new)) { ++ err = PTR_ERR(new); ++ goto err_alloc_iovma; ++ } ++ new->va = va; ++ new->sgt = sgt; ++ ++ if (map_iovm_area(obj, new, sgt, new->flags)) ++ goto err_map; ++ ++ mutex_unlock(&obj->mmap_lock); ++ ++ dev_dbg(obj->dev, "%s: da:%08x(%x) flags:%08x va:%p\n", ++ __func__, new->da_start, bytes, new->flags, va); ++ ++ return new->da_start; ++ ++err_map: ++ free_iovm_area(obj, new); ++err_alloc_iovma: ++ mutex_unlock(&obj->mmap_lock); ++ return err; ++} ++ ++static inline u32 __iommu_vmap(struct iommu *obj, u32 da, ++ const struct sg_table *sgt, void *va, size_t bytes, u32 flags) ++{ ++ return map_iommu_region(obj, da, sgt, va, bytes, flags); ++} ++ ++/** ++ * iommu_vmap - (d)-(p)-(v) address mapper ++ * @obj: objective iommu ++ * @sgt: address of scatter gather table ++ * @flags: iovma and page property ++ * ++ * Creates 1-n-1 mapping with given @sgt and returns @da. ++ * All @sgt element must be io page size aligned. ++ */ ++u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt, ++ u32 flags) ++{ ++ size_t bytes; ++ void *va; ++ ++ if (!obj || !obj->dev || !sgt) ++ return -EINVAL; ++ ++ bytes = sgtable_len(sgt); ++ if (!bytes) ++ return -EINVAL; ++ bytes = PAGE_ALIGN(bytes); ++ ++ va = vmap_sg(sgt); ++ if (IS_ERR(va)) ++ return PTR_ERR(va); ++ ++ flags &= IOVMF_HW_MASK; ++ flags |= IOVMF_DISCONT; ++ flags |= IOVMF_MMIO; ++ flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON); ++ ++ da = __iommu_vmap(obj, da, sgt, va, bytes, flags); ++ if (IS_ERR_VALUE(da)) ++ vunmap_sg(va); ++ ++ return da; ++} ++EXPORT_SYMBOL_GPL(iommu_vmap); ++ ++/** ++ * iommu_vunmap - release virtual mapping obtained by 'iommu_vmap()' ++ * @obj: objective iommu ++ * @da: iommu device virtual address ++ * ++ * Free the iommu virtually contiguous memory area starting at ++ * @da, which was returned by 'iommu_vmap()'. ++ */ ++struct sg_table *iommu_vunmap(struct iommu *obj, u32 da) ++{ ++ struct sg_table *sgt; ++ /* ++ * 'sgt' is allocated before 'iommu_vmalloc()' is called. ++ * Just returns 'sgt' to the caller to free ++ */ ++ sgt = unmap_vm_area(obj, da, vunmap_sg, IOVMF_DISCONT | IOVMF_MMIO); ++ if (!sgt) ++ dev_err(obj->dev, "%s: No sgt\n", __func__); ++ return sgt; ++} ++EXPORT_SYMBOL_GPL(iommu_vunmap); ++ ++/** ++ * iommu_vmalloc - (d)-(p)-(v) address allocator and mapper ++ * @obj: objective iommu ++ * @da: contiguous iommu virtual memory ++ * @bytes: allocation size ++ * @flags: iovma and page property ++ * ++ * Allocate @bytes linearly and creates 1-n-1 mapping and returns ++ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set. ++ */ ++u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags) ++{ ++ void *va; ++ struct sg_table *sgt; ++ ++ if (!obj || !obj->dev || !bytes) ++ return -EINVAL; ++ ++ bytes = PAGE_ALIGN(bytes); ++ ++ va = vmalloc(bytes); ++ if (!va) ++ return -ENOMEM; ++ ++ sgt = sgtable_alloc(bytes, flags); ++ if (IS_ERR(sgt)) { ++ da = PTR_ERR(sgt); ++ goto err_sgt_alloc; ++ } ++ sgtable_fill_vmalloc(sgt, va); ++ ++ flags &= IOVMF_HW_MASK; ++ flags |= IOVMF_DISCONT; ++ flags |= IOVMF_ALLOC; ++ flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON); ++ ++ da = __iommu_vmap(obj, da, sgt, va, bytes, flags); ++ if (IS_ERR_VALUE(da)) ++ goto err_iommu_vmap; ++ ++ return da; ++ ++err_iommu_vmap: ++ sgtable_drain_vmalloc(sgt); ++ sgtable_free(sgt); ++err_sgt_alloc: ++ vfree(va); ++ return da; ++} ++EXPORT_SYMBOL_GPL(iommu_vmalloc); ++ ++/** ++ * iommu_vfree - release memory allocated by 'iommu_vmalloc()' ++ * @obj: objective iommu ++ * @da: iommu device virtual address ++ * ++ * Frees the iommu virtually continuous memory area starting at ++ * @da, as obtained from 'iommu_vmalloc()'. ++ */ ++void iommu_vfree(struct iommu *obj, const u32 da) ++{ ++ struct sg_table *sgt; ++ ++ sgt = unmap_vm_area(obj, da, vfree, IOVMF_DISCONT | IOVMF_ALLOC); ++ if (!sgt) ++ dev_err(obj->dev, "%s: No sgt\n", __func__); ++ sgtable_free(sgt); ++} ++EXPORT_SYMBOL_GPL(iommu_vfree); ++ ++static u32 __iommu_kmap(struct iommu *obj, u32 da, u32 pa, void *va, ++ size_t bytes, u32 flags) ++{ ++ struct sg_table *sgt; ++ ++ sgt = sgtable_alloc(bytes, flags); ++ if (IS_ERR(sgt)) ++ return PTR_ERR(sgt); ++ ++ sgtable_fill_kmalloc(sgt, pa, bytes); ++ ++ da = map_iommu_region(obj, da, sgt, va, bytes, flags); ++ if (IS_ERR_VALUE(da)) { ++ sgtable_drain_kmalloc(sgt); ++ sgtable_free(sgt); ++ } ++ ++ return da; ++} ++ ++/** ++ * iommu_kmap - (d)-(p)-(v) address mapper ++ * @obj: objective iommu ++ * @da: contiguous iommu virtual memory ++ * @pa: contiguous physical memory ++ * @flags: iovma and page property ++ * ++ * Creates 1-1-1 mapping and returns @da again, which can be ++ * adjusted if 'IOVMF_DA_ANON' is set. ++ */ ++u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes, ++ u32 flags) ++{ ++ void *va; ++ ++ if (!obj || !obj->dev || !bytes) ++ return -EINVAL; ++ ++ bytes = PAGE_ALIGN(bytes); ++ ++ va = ioremap(pa, bytes); ++ if (!va) ++ return -ENOMEM; ++ ++ flags &= IOVMF_HW_MASK; ++ flags |= IOVMF_LINEAR; ++ flags |= IOVMF_MMIO; ++ flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON); ++ ++ da = __iommu_kmap(obj, da, pa, va, bytes, flags); ++ if (IS_ERR_VALUE(da)) ++ iounmap(va); ++ ++ return da; ++} ++EXPORT_SYMBOL_GPL(iommu_kmap); ++ ++/** ++ * iommu_kunmap - release virtual mapping obtained by 'iommu_kmap()' ++ * @obj: objective iommu ++ * @da: iommu device virtual address ++ * ++ * Frees the iommu virtually contiguous memory area starting at ++ * @da, which was passed to and was returned by'iommu_kmap()'. ++ */ ++void iommu_kunmap(struct iommu *obj, u32 da) ++{ ++ struct sg_table *sgt; ++ ++ sgt = unmap_vm_area(obj, da, __iounmap, IOVMF_LINEAR | IOVMF_MMIO); ++ if (!sgt) ++ dev_err(obj->dev, "%s: No sgt\n", __func__); ++ sgtable_free(sgt); ++} ++EXPORT_SYMBOL_GPL(iommu_kunmap); ++ ++/** ++ * iommu_kmalloc - (d)-(p)-(v) address allocator and mapper ++ * @obj: objective iommu ++ * @da: contiguous iommu virtual memory ++ * @bytes: bytes for allocation ++ * @flags: iovma and page property ++ * ++ * Allocate @bytes linearly and creates 1-1-1 mapping and returns ++ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set. ++ */ ++u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags) ++{ ++ void *va; ++ u32 pa; ++ ++ if (!obj || !obj->dev || !bytes) ++ return -EINVAL; ++ ++ bytes = PAGE_ALIGN(bytes); ++ ++ va = kmalloc(bytes, GFP_KERNEL | GFP_DMA); ++ if (!va) ++ return -ENOMEM; ++ pa = virt_to_phys(va); ++ ++ flags &= IOVMF_HW_MASK; ++ flags |= IOVMF_LINEAR; ++ flags |= IOVMF_ALLOC; ++ flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON); ++ ++ da = __iommu_kmap(obj, da, pa, va, bytes, flags); ++ if (IS_ERR_VALUE(da)) ++ kfree(va); ++ ++ return da; ++} ++EXPORT_SYMBOL_GPL(iommu_kmalloc); ++ ++/** ++ * iommu_kfree - release virtual mapping obtained by 'iommu_kmalloc()' ++ * @obj: objective iommu ++ * @da: iommu device virtual address ++ * ++ * Frees the iommu virtually contiguous memory area starting at ++ * @da, which was passed to and was returned by'iommu_kmalloc()'. ++ */ ++void iommu_kfree(struct iommu *obj, u32 da) ++{ ++ struct sg_table *sgt; ++ ++ sgt = unmap_vm_area(obj, da, kfree, IOVMF_LINEAR | IOVMF_ALLOC); ++ if (!sgt) ++ dev_err(obj->dev, "%s: No sgt\n", __func__); ++ sgtable_free(sgt); ++} ++EXPORT_SYMBOL_GPL(iommu_kfree); ++ ++ ++static int __init iovmm_init(void) ++{ ++ const unsigned long flags = SLAB_HWCACHE_ALIGN; ++ struct kmem_cache *p; ++ ++ p = kmem_cache_create("iovm_area_cache", sizeof(struct iovm_struct), 0, ++ flags, NULL); ++ if (!p) ++ return -ENOMEM; ++ iovm_area_cachep = p; ++ ++ return 0; ++} ++module_init(iovmm_init); ++ ++static void __exit iovmm_exit(void) ++{ ++ kmem_cache_destroy(iovm_area_cachep); ++} ++module_exit(iovmm_exit); ++ ++MODULE_DESCRIPTION("omap iommu: simple virtual address space management"); ++MODULE_AUTHOR("Hiroshi DOYU "); ++MODULE_LICENSE("GPL v2"); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0005-omap-iommu-entries-for-Kconfig-and-Makefile.patch b/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0005-omap-iommu-entries-for-Kconfig-and-Makefile.patch new file mode 100644 index 000000000..c0f9e4d9a --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0005-omap-iommu-entries-for-Kconfig-and-Makefile.patch @@ -0,0 +1,45 @@ +From 7de046a6a8446358001c38ad1d0b2b829ca0c98c Mon Sep 17 00:00:00 2001 +From: Hiroshi DOYU +Date: Wed, 28 Jan 2009 21:32:08 +0200 +Subject: [PATCH] omap iommu: entries for Kconfig and Makefile + +Signed-off-by: Hiroshi DOYU +--- + arch/arm/plat-omap/Kconfig | 8 ++++++++ + arch/arm/plat-omap/Makefile | 1 + + 2 files changed, 9 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig +index b16ae76..2090bb5 100644 +--- a/arch/arm/plat-omap/Kconfig ++++ b/arch/arm/plat-omap/Kconfig +@@ -176,6 +176,14 @@ config OMAP_MBOX_FWK + Say Y here if you want to use OMAP Mailbox framework support for + DSP, IVA1.0 and IVA2 in OMAP1/2/3. + ++config OMAP_IOMMU ++ tristate "IOMMU support" ++ depends on ARCH_OMAP ++ default n ++ help ++ Say Y here if you want to use OMAP IOMMU support for IVA2 and ++ Camera in OMAP3. ++ + choice + prompt "System timer" + default OMAP_MPU_TIMER +diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile +index 3ebc09e..aa8f6df 100644 +--- a/arch/arm/plat-omap/Makefile ++++ b/arch/arm/plat-omap/Makefile +@@ -13,6 +13,7 @@ obj- := + obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o + + obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o ++obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o + + obj-$(CONFIG_CPU_FREQ) += cpu-omap.o + obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0006-omap-iommu-Don-t-try-BUG_ON-in_interrupt.patch b/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0006-omap-iommu-Don-t-try-BUG_ON-in_interrupt.patch new file mode 100644 index 000000000..54a7abfe8 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0006-omap-iommu-Don-t-try-BUG_ON-in_interrupt.patch @@ -0,0 +1,26 @@ +From b03f695e25bbdaa95a2cc87e15ee8592e7ca128d Mon Sep 17 00:00:00 2001 +From: Sakari Ailus +Date: Tue, 10 Feb 2009 18:01:29 +0200 +Subject: [PATCH] omap iommu: Don't try BUG_ON(in_interrupt()) + +Signed-off-by: Sakari Ailus +--- + arch/arm/plat-omap/iovmm.c | 2 -- + 1 files changed, 0 insertions(+), 2 deletions(-) + +diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c +index 6726d10..bdfbb09 100644 +--- a/arch/arm/plat-omap/iovmm.c ++++ b/arch/arm/plat-omap/iovmm.c +@@ -523,8 +523,6 @@ static struct sg_table *unmap_vm_area(struct iommu *obj, const u32 da, + struct sg_table *sgt = NULL; + struct iovm_struct *area; + +- BUG_ON(in_interrupt()); +- + if (!IS_ALIGNED(da, PAGE_SIZE)) { + dev_err(obj->dev, "%s: alignment err(%08x)\n", __func__, da); + return NULL; +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0007-omap-iommu-We-support-chained-scatterlists-probabl.patch b/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0007-omap-iommu-We-support-chained-scatterlists-probabl.patch new file mode 100644 index 000000000..d8ad0eb0b --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0007-omap-iommu-We-support-chained-scatterlists-probabl.patch @@ -0,0 +1,24 @@ +From 24f984f784cae1a4515fe1be8db1ac24cdf51e84 Mon Sep 17 00:00:00 2001 +From: Sakari Ailus +Date: Tue, 10 Feb 2009 18:37:41 +0200 +Subject: [PATCH] omap iommu: We support chained scatterlists, probably. :) + +Signed-off-by: Sakari Ailus +--- + arch/arm/include/asm/scatterlist.h | 2 ++ + 1 files changed, 2 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h +index ca0a37d..393f8b8 100644 +--- a/arch/arm/include/asm/scatterlist.h ++++ b/arch/arm/include/asm/scatterlist.h +@@ -24,4 +24,6 @@ struct scatterlist { + #define sg_dma_address(sg) ((sg)->dma_address) + #define sg_dma_len(sg) ((sg)->length) + ++#define ARCH_HAS_SG_CHAIN ++ + #endif /* _ASMARM_SCATTERLIST_H */ +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0008-omap2-iommu-entries-for-Kconfig-and-Makefile.patch b/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0008-omap2-iommu-entries-for-Kconfig-and-Makefile.patch new file mode 100644 index 000000000..298e797c3 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/iommu/0008-omap2-iommu-entries-for-Kconfig-and-Makefile.patch @@ -0,0 +1,29 @@ +From 3c65ff4a684d3e0f4d9c59e731975408452c3743 Mon Sep 17 00:00:00 2001 +From: Hiroshi DOYU +Date: Wed, 28 Jan 2009 21:32:09 +0200 +Subject: [PATCH] omap2 iommu: entries for Kconfig and Makefile + +Signed-off-by: Hiroshi DOYU +--- + arch/arm/mach-omap2/Makefile | 5 +++++ + 1 files changed, 5 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile +index b44bb78..33b5aa8 100644 +--- a/arch/arm/mach-omap2/Makefile ++++ b/arch/arm/mach-omap2/Makefile +@@ -38,6 +38,11 @@ obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o + obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o + mailbox_mach-objs := mailbox.o + ++iommu-y += iommu2.o ++iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o ++ ++obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y) ++ + # Specific board support + obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o + obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o board-h4-mmc.o +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0001-omap3isp-Add-ISP-main-driver-and-register-definitio.patch b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0001-omap3isp-Add-ISP-main-driver-and-register-definitio.patch new file mode 100644 index 000000000..e6e07d8af --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0001-omap3isp-Add-ISP-main-driver-and-register-definitio.patch @@ -0,0 +1,4625 @@ +From 77c99cd863b906c803c3dec08753c19bf9b67882 Mon Sep 17 00:00:00 2001 +From: Sakari Ailus +Date: Tue, 10 Mar 2009 10:49:02 +0200 +Subject: [PATCH] omap3isp: Add ISP main driver and register definitions + +TODO: + +- Release resoures in isp_probe() if something fails. + +- Implement a sensible generic interface so that the ISP can offer a + v4l2_subdev (like the v4l2-int-device slaves) interface towards the + camera driver. + +- Handle CSI1 and CSI2 error cases (currently unhandled?). + +- Fix H3A / HIST interrupt enabling / disabling. + +- Clean up the private ioctls. + +- Handle SBL overflows somehow. + +Signed-off-by: Sakari Ailus +--- + drivers/media/video/Makefile | 2 + + drivers/media/video/isp/Makefile | 12 + + drivers/media/video/isp/isp.c | 2547 ++++++++++++++++++++++++++++++++++++++ + drivers/media/video/isp/isp.h | 318 +++++ + drivers/media/video/isp/ispreg.h | 1674 +++++++++++++++++++++++++ + 5 files changed, 4553 insertions(+), 0 deletions(-) + create mode 100644 drivers/media/video/isp/Makefile + create mode 100644 drivers/media/video/isp/isp.c + create mode 100644 drivers/media/video/isp/isp.h + create mode 100644 drivers/media/video/isp/ispreg.h + +diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile +index 72f6d03..e654270 100644 +--- a/drivers/media/video/Makefile ++++ b/drivers/media/video/Makefile +@@ -106,6 +106,8 @@ obj-$(CONFIG_VIDEO_CX2341X) += cx2341x.o + obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o + obj-$(CONFIG_VIDEO_OV7670) += ov7670.o + ++obj-y += isp/ ++ + obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o + + obj-$(CONFIG_USB_DABUSB) += dabusb.o +diff --git a/drivers/media/video/isp/Makefile b/drivers/media/video/isp/Makefile +new file mode 100644 +index 0000000..f14d617 +--- /dev/null ++++ b/drivers/media/video/isp/Makefile +@@ -0,0 +1,12 @@ ++# Makefile for OMAP3 ISP driver ++ ++ifdef CONFIG_ARCH_OMAP3410 ++isp-mod-objs += \ ++ isp.o ispccdc.o ++else ++isp-mod-objs += \ ++ isp.o ispccdc.o ispmmu.o \ ++ isppreview.o ispresizer.o isph3a.o isphist.o isp_af.o ispcsi2.o ++endif ++ ++obj-$(CONFIG_VIDEO_OMAP3) += isp-mod.o +diff --git a/drivers/media/video/isp/isp.c b/drivers/media/video/isp/isp.c +new file mode 100644 +index 0000000..54c839b +--- /dev/null ++++ b/drivers/media/video/isp/isp.c +@@ -0,0 +1,2547 @@ ++/* ++ * isp.c ++ * ++ * Driver Library for ISP Control module in TI's OMAP3 Camera ISP ++ * ISP interface and IRQ related APIs are defined here. ++ * ++ * Copyright (C) 2009 Texas Instruments. ++ * Copyright (C) 2009 Nokia. ++ * ++ * Contributors: ++ * Sameer Venkatraman ++ * Mohit Jalori ++ * Sergio Aguirre ++ * Sakari Ailus ++ * Tuukka Toivonen ++ * Toni Leinonen ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "isp.h" ++#include "ispmmu.h" ++#include "ispreg.h" ++#include "ispccdc.h" ++#include "isph3a.h" ++#include "isphist.h" ++#include "isp_af.h" ++#include "isppreview.h" ++#include "ispresizer.h" ++#include "ispcsi2.h" ++ ++static struct isp_device *omap3isp; ++ ++static int isp_try_size(struct v4l2_pix_format *pix_input, ++ struct v4l2_pix_format *pix_output); ++ ++static void isp_save_ctx(void); ++ ++static void isp_restore_ctx(void); ++ ++static void isp_buf_init(void); ++ ++/* List of image formats supported via OMAP ISP */ ++const static struct v4l2_fmtdesc isp_formats[] = { ++ { ++ .description = "UYVY, packed", ++ .pixelformat = V4L2_PIX_FMT_UYVY, ++ }, ++ { ++ .description = "YUYV (YUV 4:2:2), packed", ++ .pixelformat = V4L2_PIX_FMT_YUYV, ++ }, ++ { ++ .description = "Bayer10 (GrR/BGb)", ++ .pixelformat = V4L2_PIX_FMT_SGRBG10, ++ }, ++}; ++ ++/* ISP Crop capabilities */ ++static struct v4l2_rect ispcroprect; ++static struct v4l2_rect cur_rect; ++ ++/** ++ * struct vcontrol - Video control structure. ++ * @qc: V4L2 Query control structure. ++ * @current_value: Current value of the control. ++ */ ++static struct vcontrol { ++ struct v4l2_queryctrl qc; ++ int current_value; ++} video_control[] = { ++ { ++ { ++ .id = V4L2_CID_BRIGHTNESS, ++ .type = V4L2_CTRL_TYPE_INTEGER, ++ .name = "Brightness", ++ .minimum = ISPPRV_BRIGHT_LOW, ++ .maximum = ISPPRV_BRIGHT_HIGH, ++ .step = ISPPRV_BRIGHT_STEP, ++ .default_value = ISPPRV_BRIGHT_DEF, ++ }, ++ .current_value = ISPPRV_BRIGHT_DEF, ++ }, ++ { ++ { ++ .id = V4L2_CID_CONTRAST, ++ .type = V4L2_CTRL_TYPE_INTEGER, ++ .name = "Contrast", ++ .minimum = ISPPRV_CONTRAST_LOW, ++ .maximum = ISPPRV_CONTRAST_HIGH, ++ .step = ISPPRV_CONTRAST_STEP, ++ .default_value = ISPPRV_CONTRAST_DEF, ++ }, ++ .current_value = ISPPRV_CONTRAST_DEF, ++ }, ++ { ++ { ++ .id = V4L2_CID_COLORFX, ++ .type = V4L2_CTRL_TYPE_MENU, ++ .name = "Color Effects", ++ .minimum = V4L2_COLORFX_NONE, ++ .maximum = V4L2_COLORFX_SEPIA, ++ .step = 1, ++ .default_value = V4L2_COLORFX_NONE, ++ }, ++ .current_value = V4L2_COLORFX_NONE, ++ } ++}; ++ ++static struct v4l2_querymenu video_menu[] = { ++ { ++ .id = V4L2_CID_COLORFX, ++ .index = 0, ++ .name = "None", ++ }, ++ { ++ .id = V4L2_CID_COLORFX, ++ .index = 1, ++ .name = "B&W", ++ }, ++ { ++ .id = V4L2_CID_COLORFX, ++ .index = 2, ++ .name = "Sepia", ++ }, ++}; ++ ++struct isp_buf { ++ dma_addr_t isp_addr; ++ void (*complete)(struct videobuf_buffer *vb, void *priv); ++ struct videobuf_buffer *vb; ++ void *priv; ++ u32 vb_state; ++}; ++ ++#define ISP_BUFS_IS_FULL(bufs) \ ++ (((bufs)->queue + 1) % NUM_BUFS == (bufs)->done) ++#define ISP_BUFS_IS_EMPTY(bufs) ((bufs)->queue == (bufs)->done) ++#define ISP_BUFS_IS_LAST(bufs) \ ++ ((bufs)->queue == ((bufs)->done + 1) % NUM_BUFS) ++#define ISP_BUFS_QUEUED(bufs) \ ++ ((((bufs)->done - (bufs)->queue + NUM_BUFS)) % NUM_BUFS) ++#define ISP_BUF_DONE(bufs) ((bufs)->buf + (bufs)->done) ++#define ISP_BUF_NEXT_DONE(bufs) \ ++ ((bufs)->buf + ((bufs)->done + 1) % NUM_BUFS) ++#define ISP_BUF_QUEUE(bufs) ((bufs)->buf + (bufs)->queue) ++#define ISP_BUF_MARK_DONE(bufs) \ ++ (bufs)->done = ((bufs)->done + 1) % NUM_BUFS; ++#define ISP_BUF_MARK_QUEUED(bufs) \ ++ (bufs)->queue = ((bufs)->queue + 1) % NUM_BUFS; ++ ++struct isp_bufs { ++ dma_addr_t isp_addr_capture[VIDEO_MAX_FRAME]; ++ spinlock_t lock; /* For handling current buffer */ ++ /* queue full: (ispsg.queue + 1) % NUM_BUFS == ispsg.done ++ queue empty: ispsg.queue == ispsg.done */ ++ struct isp_buf buf[NUM_BUFS]; ++ /* Next slot to queue a buffer. */ ++ int queue; ++ /* Buffer that is being processed. */ ++ int done; ++ /* Wait for this many hs_vs before anything else. */ ++ int wait_hs_vs; ++}; ++ ++/** ++ * struct ispirq - Structure for containing callbacks to be called in ISP ISR. ++ * @isp_callbk: Array which stores callback functions, indexed by the type of ++ * callback (8 possible types). ++ * @isp_callbk_arg1: Pointer to array containing pointers to the first argument ++ * to be passed to the requested callback function. ++ * @isp_callbk_arg2: Pointer to array containing pointers to the second ++ * argument to be passed to the requested callback function. ++ * ++ * This structure is used to contain all the callback functions related for ++ * each callback type (CBK_CCDC_VD0, CBK_CCDC_VD1, CBK_PREV_DONE, ++ * CBK_RESZ_DONE, CBK_MMU_ERR, CBK_H3A_AWB_DONE, CBK_HIST_DONE, CBK_HS_VS, ++ * CBK_LSC_ISR). ++ */ ++struct isp_irq { ++ isp_callback_t isp_callbk[CBK_END]; ++ isp_vbq_callback_ptr isp_callbk_arg1[CBK_END]; ++ void *isp_callbk_arg2[CBK_END]; ++}; ++ ++/** ++ * struct ispmodule - Structure for storing ISP sub-module information. ++ * @isp_pipeline: Bit mask for submodules enabled within the ISP. ++ * @applyCrop: Flag to do a crop operation when video buffer queue ISR is done ++ * @pix: Structure containing the format and layout of the output image. ++ * @ccdc_input_width: ISP CCDC module input image width. ++ * @ccdc_input_height: ISP CCDC module input image height. ++ * @ccdc_output_width: ISP CCDC module output image width. ++ * @ccdc_output_height: ISP CCDC module output image height. ++ * @preview_input_width: ISP Preview module input image width. ++ * @preview_input_height: ISP Preview module input image height. ++ * @preview_output_width: ISP Preview module output image width. ++ * @preview_output_height: ISP Preview module output image height. ++ * @resizer_input_width: ISP Resizer module input image width. ++ * @resizer_input_height: ISP Resizer module input image height. ++ * @resizer_output_width: ISP Resizer module output image width. ++ * @resizer_output_height: ISP Resizer module output image height. ++ */ ++struct isp_module { ++ unsigned int isp_pipeline; ++ int applyCrop; ++ struct v4l2_pix_format pix; ++ unsigned int ccdc_input_width; ++ unsigned int ccdc_input_height; ++ unsigned int ccdc_output_width; ++ unsigned int ccdc_output_height; ++ unsigned int preview_input_width; ++ unsigned int preview_input_height; ++ unsigned int preview_output_width; ++ unsigned int preview_output_height; ++ unsigned int resizer_input_width; ++ unsigned int resizer_input_height; ++ unsigned int resizer_output_width; ++ unsigned int resizer_output_height; ++}; ++ ++#define RAW_CAPTURE(isp) \ ++ (!((isp)->module.isp_pipeline & OMAP_ISP_PREVIEW)) ++ ++/** ++ * struct isp - Structure for storing ISP Control module information ++ * @lock: Spinlock to sync between isr and processes. ++ * @isp_mutex: Semaphore used to get access to the ISP. ++ * @ref_count: Reference counter. ++ * @cam_ick: Pointer to ISP Interface clock. ++ * @cam_fck: Pointer to ISP Functional clock. ++ * ++ * This structure is used to store the OMAP ISP Control Information. ++ */ ++static struct isp { ++ spinlock_t lock; /* For handling registered ISP callbacks */ ++ struct mutex isp_mutex; /* For handling ref_count field */ ++ int ref_count; ++ struct clk *cam_ick; ++ struct clk *cam_mclk; ++ struct clk *csi2_fck; ++ struct isp_interface_config *config; ++ dma_addr_t tmp_buf; ++ size_t tmp_buf_size; ++ unsigned long tmp_buf_offset; ++ struct isp_bufs bufs; ++ struct isp_irq irq; ++ struct isp_module module; ++} isp_obj; ++ ++/* Structure for saving/restoring ISP module registers */ ++static struct isp_reg isp_reg_list[] = { ++ {OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG, 0}, ++ {OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_GRESET_LENGTH, 0}, ++ {OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_PSTRB_REPLAY, 0}, ++ {OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, 0}, ++ {OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, 0}, ++ {OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_FRAME, 0}, ++ {OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_PSTRB_DELAY, 0}, ++ {OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_STRB_DELAY, 0}, ++ {OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_SHUT_DELAY, 0}, ++ {OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_PSTRB_LENGTH, 0}, ++ {OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_STRB_LENGTH, 0}, ++ {OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_SHUT_LENGTH, 0}, ++ {OMAP3_ISP_IOMEM_CBUFF, ISP_CBUFF_SYSCONFIG, 0}, ++ {OMAP3_ISP_IOMEM_CBUFF, ISP_CBUFF_IRQENABLE, 0}, ++ {OMAP3_ISP_IOMEM_CBUFF, ISP_CBUFF0_CTRL, 0}, ++ {OMAP3_ISP_IOMEM_CBUFF, ISP_CBUFF1_CTRL, 0}, ++ {OMAP3_ISP_IOMEM_CBUFF, ISP_CBUFF0_START, 0}, ++ {OMAP3_ISP_IOMEM_CBUFF, ISP_CBUFF1_START, 0}, ++ {OMAP3_ISP_IOMEM_CBUFF, ISP_CBUFF0_END, 0}, ++ {OMAP3_ISP_IOMEM_CBUFF, ISP_CBUFF1_END, 0}, ++ {OMAP3_ISP_IOMEM_CBUFF, ISP_CBUFF0_WINDOWSIZE, 0}, ++ {OMAP3_ISP_IOMEM_CBUFF, ISP_CBUFF1_WINDOWSIZE, 0}, ++ {OMAP3_ISP_IOMEM_CBUFF, ISP_CBUFF0_THRESHOLD, 0}, ++ {OMAP3_ISP_IOMEM_CBUFF, ISP_CBUFF1_THRESHOLD, 0}, ++ {0, ISP_TOK_TERM, 0} ++}; ++ ++u32 isp_reg_readl(enum isp_mem_resources isp_mmio_range, u32 reg_offset) ++{ ++ return __raw_readl(omap3isp->mmio_base[isp_mmio_range] + reg_offset); ++} ++EXPORT_SYMBOL(isp_reg_readl); ++ ++void isp_reg_writel(u32 reg_value, enum isp_mem_resources isp_mmio_range, ++ u32 reg_offset) ++{ ++ __raw_writel(reg_value, ++ omap3isp->mmio_base[isp_mmio_range] + reg_offset); ++} ++EXPORT_SYMBOL(isp_reg_writel); ++ ++/* ++ * ++ * V4L2 Handling ++ * ++ */ ++ ++/** ++ * find_vctrl - Returns the index of the ctrl array of the requested ctrl ID. ++ * @id: Requested control ID. ++ * ++ * Returns 0 if successful, -EINVAL if not found, or -EDOM if its out of ++ * domain. ++ **/ ++static int find_vctrl(int id) ++{ ++ int i; ++ ++ if (id < V4L2_CID_BASE) ++ return -EDOM; ++ ++ for (i = (ARRAY_SIZE(video_control) - 1); i >= 0; i--) ++ if (video_control[i].qc.id == id) ++ break; ++ ++ if (i < 0) ++ i = -EINVAL; ++ ++ return i; ++} ++ ++static int find_next_vctrl(int id) ++{ ++ int i; ++ u32 best = (u32)-1; ++ ++ for (i = 0; i < ARRAY_SIZE(video_control); i++) { ++ if (video_control[i].qc.id > id && ++ (best == (u32)-1 || ++ video_control[i].qc.id < ++ video_control[best].qc.id)) { ++ best = i; ++ } ++ } ++ ++ if (best == (u32)-1) ++ return -EINVAL; ++ ++ return best; ++} ++ ++/** ++ * find_vmenu - Returns index of the menu array of the requested ctrl option. ++ * @id: Requested control ID. ++ * @index: Requested menu option index. ++ * ++ * Returns 0 if successful, -EINVAL if not found, or -EDOM if its out of ++ * domain. ++ **/ ++static int find_vmenu(int id, int index) ++{ ++ int i; ++ ++ if (id < V4L2_CID_BASE) ++ return -EDOM; ++ ++ for (i = (ARRAY_SIZE(video_menu) - 1); i >= 0; i--) { ++ if (video_menu[i].id != id || video_menu[i].index != index) ++ continue; ++ return i; ++ } ++ ++ return -EINVAL; ++} ++ ++/** ++ * isp_release_resources - Free ISP submodules ++ **/ ++static void isp_release_resources(void) ++{ ++ if (isp_obj.module.isp_pipeline & OMAP_ISP_CCDC) ++ ispccdc_free(); ++ ++ if (isp_obj.module.isp_pipeline & OMAP_ISP_PREVIEW) ++ isppreview_free(); ++ ++ if (isp_obj.module.isp_pipeline & OMAP_ISP_RESIZER) ++ ispresizer_free(); ++ return; ++} ++ ++static int isp_wait(int (*busy)(void), int wait_for_busy, int max_wait) ++{ ++ int wait = 0; ++ ++ if (max_wait == 0) ++ max_wait = 10000; /* 10 ms */ ++ ++ while ((wait_for_busy && !busy()) ++ || (!wait_for_busy && busy())) { ++ rmb(); ++ udelay(1); ++ wait++; ++ if (wait > max_wait) { ++ printk(KERN_ALERT "%s: wait is too much\n", __func__); ++ return -EBUSY; ++ } ++ } ++ DPRINTK_ISPCTRL(KERN_ALERT "%s: wait %d\n", __func__, wait); ++ ++ return 0; ++} ++ ++static int ispccdc_sbl_wait_idle(int max_wait) ++{ ++ return isp_wait(ispccdc_sbl_busy, 0, max_wait); ++} ++ ++static void isp_enable_interrupts(int is_raw) ++{ ++ isp_reg_writel(-1, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); ++ isp_reg_or(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE, ++ IRQ0ENABLE_CCDC_LSC_PREF_ERR_IRQ | ++ IRQ0ENABLE_HS_VS_IRQ | ++ IRQ0ENABLE_CCDC_VD0_IRQ | ++ IRQ0ENABLE_CCDC_VD1_IRQ); ++ ++ if (is_raw) ++ return; ++ ++ isp_reg_or(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE, ++ IRQ0ENABLE_PRV_DONE_IRQ | ++ IRQ0ENABLE_RSZ_DONE_IRQ); ++ ++ return; ++} ++ ++static void isp_disable_interrupts(void) ++{ ++ isp_reg_and(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE, ++ ~(IRQ0ENABLE_CCDC_LSC_PREF_ERR_IRQ | ++ IRQ0ENABLE_HS_VS_IRQ | ++ IRQ0ENABLE_CCDC_VD0_IRQ | ++ IRQ0ENABLE_CCDC_VD1_IRQ | ++ IRQ0ENABLE_PRV_DONE_IRQ | ++ IRQ0ENABLE_RSZ_DONE_IRQ)); ++} ++ ++/** ++ * isp_set_callback - Sets the callback for the ISP module done events. ++ * @type: Type of the event for which callback is requested. ++ * @callback: Method to be called as callback in the ISR context. ++ * @arg1: First argument to be passed when callback is called in ISR. ++ * @arg2: Second argument to be passed when callback is called in ISR. ++ * ++ * This function sets a callback function for a done event in the ISP ++ * module, and enables the corresponding interrupt. ++ **/ ++int isp_set_callback(enum isp_callback_type type, isp_callback_t callback, ++ isp_vbq_callback_ptr arg1, ++ void *arg2) ++{ ++ unsigned long irqflags = 0; ++ ++ if (callback == NULL) { ++ DPRINTK_ISPCTRL("ISP_ERR : Null Callback\n"); ++ return -EINVAL; ++ } ++ ++ spin_lock_irqsave(&isp_obj.lock, irqflags); ++ isp_obj.irq.isp_callbk[type] = callback; ++ isp_obj.irq.isp_callbk_arg1[type] = arg1; ++ isp_obj.irq.isp_callbk_arg2[type] = arg2; ++ spin_unlock_irqrestore(&isp_obj.lock, irqflags); ++ ++ switch (type) { ++ case CBK_H3A_AWB_DONE: ++ isp_reg_writel(IRQ0ENABLE_H3A_AWB_DONE_IRQ, ++ OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); ++ isp_reg_or(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE, ++ IRQ0ENABLE_H3A_AWB_DONE_IRQ); ++ break; ++ case CBK_H3A_AF_DONE: ++ isp_reg_writel(IRQ0ENABLE_H3A_AF_DONE_IRQ, ++ OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); ++ isp_reg_or(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE, ++ IRQ0ENABLE_H3A_AF_DONE_IRQ); ++ break; ++ case CBK_HIST_DONE: ++ isp_reg_writel(IRQ0ENABLE_HIST_DONE_IRQ, ++ OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); ++ isp_reg_or(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE, ++ IRQ0ENABLE_HIST_DONE_IRQ); ++ break; ++ case CBK_PREV_DONE: ++ isp_reg_writel(IRQ0ENABLE_PRV_DONE_IRQ, ++ OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); ++ isp_reg_or(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE, ++ IRQ0ENABLE_PRV_DONE_IRQ); ++ break; ++ default: ++ break; ++ } ++ ++ return 0; ++} ++EXPORT_SYMBOL(isp_set_callback); ++ ++/** ++ * isp_unset_callback - Clears the callback for the ISP module done events. ++ * @type: Type of the event for which callback to be cleared. ++ * ++ * This function clears a callback function for a done event in the ISP ++ * module, and disables the corresponding interrupt. ++ **/ ++int isp_unset_callback(enum isp_callback_type type) ++{ ++ unsigned long irqflags = 0; ++ ++ spin_lock_irqsave(&isp_obj.lock, irqflags); ++ isp_obj.irq.isp_callbk[type] = NULL; ++ isp_obj.irq.isp_callbk_arg1[type] = NULL; ++ isp_obj.irq.isp_callbk_arg2[type] = NULL; ++ spin_unlock_irqrestore(&isp_obj.lock, irqflags); ++ ++ switch (type) { ++ case CBK_H3A_AWB_DONE: ++ isp_reg_and(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE, ++ ~IRQ0ENABLE_H3A_AWB_DONE_IRQ); ++ break; ++ case CBK_H3A_AF_DONE: ++ isp_reg_and(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE, ++ ~IRQ0ENABLE_H3A_AF_DONE_IRQ); ++ break; ++ case CBK_HIST_DONE: ++ isp_reg_and(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE, ++ ~IRQ0ENABLE_HIST_DONE_IRQ); ++ break; ++ case CBK_CSIA: ++ isp_csi2_irq_set(0); ++ break; ++ case CBK_CSIB: ++ isp_reg_writel(IRQ0ENABLE_CSIB_IRQ, OMAP3_ISP_IOMEM_MAIN, ++ ISP_IRQ0STATUS); ++ isp_reg_or(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE, ++ IRQ0ENABLE_CSIB_IRQ); ++ break; ++ case CBK_PREV_DONE: ++ isp_reg_and(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE, ++ ~IRQ0ENABLE_PRV_DONE_IRQ); ++ break; ++ default: ++ break; ++ } ++ ++ return 0; ++} ++EXPORT_SYMBOL(isp_unset_callback); ++ ++/** ++ * isp_set_xclk - Configures the specified cam_xclk to the desired frequency. ++ * @xclk: Desired frequency of the clock in Hz. ++ * @xclksel: XCLK to configure (0 = A, 1 = B). ++ * ++ * Configures the specified MCLK divisor in the ISP timing control register ++ * (TCTRL_CTRL) to generate the desired xclk clock value. ++ * ++ * Divisor = CM_CAM_MCLK_HZ / xclk ++ * ++ * Returns the final frequency that is actually being generated ++ **/ ++u32 isp_set_xclk(u32 xclk, u8 xclksel) ++{ ++ u32 divisor; ++ u32 currentxclk; ++ ++ if (xclk >= CM_CAM_MCLK_HZ) { ++ divisor = ISPTCTRL_CTRL_DIV_BYPASS; ++ currentxclk = CM_CAM_MCLK_HZ; ++ } else if (xclk >= 2) { ++ divisor = CM_CAM_MCLK_HZ / xclk; ++ if (divisor >= ISPTCTRL_CTRL_DIV_BYPASS) ++ divisor = ISPTCTRL_CTRL_DIV_BYPASS - 1; ++ currentxclk = CM_CAM_MCLK_HZ / divisor; ++ } else { ++ divisor = xclk; ++ currentxclk = 0; ++ } ++ ++ switch (xclksel) { ++ case 0: ++ isp_reg_and_or(OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, ++ ~ISPTCTRL_CTRL_DIVA_MASK, ++ divisor << ISPTCTRL_CTRL_DIVA_SHIFT); ++ DPRINTK_ISPCTRL("isp_set_xclk(): cam_xclka set to %d Hz\n", ++ currentxclk); ++ break; ++ case 1: ++ isp_reg_and_or(OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, ++ ~ISPTCTRL_CTRL_DIVB_MASK, ++ divisor << ISPTCTRL_CTRL_DIVB_SHIFT); ++ DPRINTK_ISPCTRL("isp_set_xclk(): cam_xclkb set to %d Hz\n", ++ currentxclk); ++ break; ++ default: ++ DPRINTK_ISPCTRL("ISP_ERR: isp_set_xclk(): Invalid requested " ++ "xclk. Must be 0 (A) or 1 (B)." ++ "\n"); ++ return -EINVAL; ++ } ++ ++ return currentxclk; ++} ++EXPORT_SYMBOL(isp_set_xclk); ++ ++/** ++ * isp_power_settings - Sysconfig settings, for Power Management. ++ * @isp_sysconfig: Structure containing the power settings for ISP to configure ++ * ++ * Sets the power settings for the ISP, and SBL bus. ++ **/ ++static void isp_power_settings(int idle) ++{ ++ if (idle) { ++ isp_reg_writel(ISP_SYSCONFIG_AUTOIDLE | ++ (ISP_SYSCONFIG_MIDLEMODE_SMARTSTANDBY << ++ ISP_SYSCONFIG_MIDLEMODE_SHIFT), ++ OMAP3_ISP_IOMEM_MAIN, ++ ISP_SYSCONFIG); ++ if (omap_rev() == OMAP3430_REV_ES1_0) { ++ isp_reg_writel(ISPCSI1_AUTOIDLE | ++ (ISPCSI1_MIDLEMODE_SMARTSTANDBY << ++ ISPCSI1_MIDLEMODE_SHIFT), ++ OMAP3_ISP_IOMEM_CSI2A, ++ ISP_CSIA_SYSCONFIG); ++ isp_reg_writel(ISPCSI1_AUTOIDLE | ++ (ISPCSI1_MIDLEMODE_SMARTSTANDBY << ++ ISPCSI1_MIDLEMODE_SHIFT), ++ OMAP3_ISP_IOMEM_CCP2, ++ ISP_CSIB_SYSCONFIG); ++ } ++ isp_reg_writel(ISPCTRL_SBL_AUTOIDLE, OMAP3_ISP_IOMEM_MAIN, ++ ISP_CTRL); ++ ++ } else { ++ isp_reg_writel(ISP_SYSCONFIG_AUTOIDLE | ++ (ISP_SYSCONFIG_MIDLEMODE_FORCESTANDBY << ++ ISP_SYSCONFIG_MIDLEMODE_SHIFT), ++ OMAP3_ISP_IOMEM_MAIN, ++ ISP_SYSCONFIG); ++ if (omap_rev() == OMAP3430_REV_ES1_0) { ++ isp_reg_writel(ISPCSI1_AUTOIDLE | ++ (ISPCSI1_MIDLEMODE_FORCESTANDBY << ++ ISPCSI1_MIDLEMODE_SHIFT), ++ OMAP3_ISP_IOMEM_CSI2A, ++ ISP_CSIA_SYSCONFIG); ++ ++ isp_reg_writel(ISPCSI1_AUTOIDLE | ++ (ISPCSI1_MIDLEMODE_FORCESTANDBY << ++ ISPCSI1_MIDLEMODE_SHIFT), ++ OMAP3_ISP_IOMEM_CCP2, ++ ISP_CSIB_SYSCONFIG); ++ } ++ ++ isp_reg_writel(ISPCTRL_SBL_AUTOIDLE, OMAP3_ISP_IOMEM_MAIN, ++ ISP_CTRL); ++ } ++} ++ ++#define BIT_SET(var, shift, mask, val) \ ++ do { \ ++ var = (var & ~(mask << shift)) \ ++ | (val << shift); \ ++ } while (0) ++ ++static int isp_init_csi(struct isp_interface_config *config) ++{ ++ u32 i = 0, val, reg; ++ int format; ++ ++ switch (config->u.csi.format) { ++ case V4L2_PIX_FMT_SGRBG10: ++ format = 0x16; /* RAW10+VP */ ++ break; ++ case V4L2_PIX_FMT_SGRBG10DPCM8: ++ format = 0x12; /* RAW8+DPCM10+VP */ ++ break; ++ default: ++ printk(KERN_ERR "isp_init_csi: bad csi format\n"); ++ return -EINVAL; ++ } ++ ++ /* Reset the CSI and wait for reset to complete */ ++ isp_reg_writel(isp_reg_readl(OMAP3_ISP_IOMEM_CCP2, ISPCSI1_SYSCONFIG) | ++ BIT(1), ++ OMAP3_ISP_IOMEM_CCP2, ++ ISPCSI1_SYSCONFIG); ++ while (!(isp_reg_readl(OMAP3_ISP_IOMEM_CCP2, ISPCSI1_SYSSTATUS) & ++ BIT(0))) { ++ udelay(10); ++ if (i++ > 10) ++ break; ++ } ++ if (!(isp_reg_readl(OMAP3_ISP_IOMEM_CCP2, ISPCSI1_SYSSTATUS) & ++ BIT(0))) { ++ printk(KERN_WARNING ++ "omap3_isp: timeout waiting for csi reset\n"); ++ } ++ ++ /* ISPCSI1_CTRL */ ++ val = isp_reg_readl(OMAP3_ISP_IOMEM_CCP2, ISPCSI1_CTRL); ++ val &= ~BIT(11); /* Enable VP only off -> ++ extract embedded data to interconnect */ ++ BIT_SET(val, 8, 0x3, config->u.csi.vpclk); /* Video port clock */ ++/* val |= BIT(3); */ /* Wait for FEC before disabling interface */ ++ val |= BIT(2); /* I/O cell output is parallel ++ (no effect, but errata says should be enabled ++ for class 1/2) */ ++ val |= BIT(12); /* VP clock polarity to falling edge ++ (needed or bad picture!) */ ++ ++ /* Data/strobe physical layer */ ++ BIT_SET(val, 1, 1, config->u.csi.signalling); ++ BIT_SET(val, 10, 1, config->u.csi.strobe_clock_inv); ++ val |= BIT(4); /* Magic bit to enable CSI1 and strobe mode */ ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_CCP2, ISPCSI1_CTRL); ++ ++ /* ISPCSI1_LCx_CTRL logical channel #0 */ ++ reg = ISPCSI1_LCx_CTRL(0); /* reg = ISPCSI1_CTRL1; */ ++ val = isp_reg_readl(OMAP3_ISP_IOMEM_CCP2, reg); ++ /* Format = RAW10+VP or RAW8+DPCM10+VP*/ ++ BIT_SET(val, 3, 0x1f, format); ++ /* Enable setting of frame regions of interest */ ++ BIT_SET(val, 1, 1, 1); ++ BIT_SET(val, 2, 1, config->u.csi.crc); ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_CCP2, reg); ++ ++ /* ISPCSI1_DAT_START for logical channel #0 */ ++ reg = ISPCSI1_LCx_DAT_START(0); /* reg = ISPCSI1_DAT_START; */ ++ val = isp_reg_readl(OMAP3_ISP_IOMEM_CCP2, reg); ++ BIT_SET(val, 16, 0xfff, config->u.csi.data_start); ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_CCP2, reg); ++ ++ /* ISPCSI1_DAT_SIZE for logical channel #0 */ ++ reg = ISPCSI1_LCx_DAT_SIZE(0); /* reg = ISPCSI1_DAT_SIZE; */ ++ val = isp_reg_readl(OMAP3_ISP_IOMEM_CCP2, reg); ++ BIT_SET(val, 16, 0xfff, config->u.csi.data_size); ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_CCP2, reg); ++ ++ /* Clear status bits for logical channel #0 */ ++ isp_reg_writel(0xFFF & ~BIT(6), OMAP3_ISP_IOMEM_CCP2, ++ ISPCSI1_LC01_IRQSTATUS); ++ ++ /* Enable CSI1 */ ++ val = isp_reg_readl(OMAP3_ISP_IOMEM_CCP2, ISPCSI1_CTRL); ++ val |= BIT(0) | BIT(4); ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_CCP2, ISPCSI1_CTRL); ++ ++ if (!(isp_reg_readl(OMAP3_ISP_IOMEM_CCP2, ISPCSI1_CTRL) & BIT(4))) { ++ printk(KERN_WARNING "OMAP3 CSI1 bus not available\n"); ++ if (config->u.csi.signalling) /* Strobe mode requires CSI1 */ ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++/** ++ * isp_configure_interface - Configures ISP Control I/F related parameters. ++ * @config: Pointer to structure containing the desired configuration for the ++ * ISP. ++ * ++ * Configures ISP control register (ISP_CTRL) with the values specified inside ++ * the config structure. Controls: ++ * - Selection of parallel or serial input to the preview hardware. ++ * - Data lane shifter. ++ * - Pixel clock polarity. ++ * - 8 to 16-bit bridge at the input of CCDC module. ++ * - HS or VS synchronization signal detection ++ **/ ++int isp_configure_interface(struct isp_interface_config *config) ++{ ++ u32 ispctrl_val = isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_CTRL); ++ int r; ++ ++ isp_obj.config = config; ++ ++ ispctrl_val &= ISPCTRL_SHIFT_MASK; ++ ispctrl_val |= config->dataline_shift << ISPCTRL_SHIFT_SHIFT; ++ ispctrl_val &= ~ISPCTRL_PAR_CLK_POL_INV; ++ ++ ispctrl_val &= ISPCTRL_PAR_SER_CLK_SEL_MASK; ++ ++ isp_buf_init(); ++ ++ switch (config->ccdc_par_ser) { ++ case ISP_PARLL: ++ ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_PARALLEL; ++ ispctrl_val |= config->u.par.par_clk_pol ++ << ISPCTRL_PAR_CLK_POL_SHIFT; ++ ispctrl_val &= ~ISPCTRL_PAR_BRIDGE_BENDIAN; ++ ispctrl_val |= config->u.par.par_bridge ++ << ISPCTRL_PAR_BRIDGE_SHIFT; ++ break; ++ case ISP_CSIA: ++ ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_CSIA; ++ ispctrl_val &= ~ISPCTRL_PAR_BRIDGE_BENDIAN; ++ ++ isp_csi2_ctx_config_format(0, config->u.csi.format); ++ isp_csi2_ctx_update(0, false); ++ ++ if (config->u.csi.crc) ++ isp_csi2_ctrl_config_ecc_enable(true); ++ ++ isp_csi2_ctrl_config_vp_out_ctrl(config->u.csi.vpclk); ++ isp_csi2_ctrl_config_vp_only_enable(true); ++ isp_csi2_ctrl_config_vp_clk_enable(true); ++ isp_csi2_ctrl_update(false); ++ ++ isp_csi2_irq_complexio1_set(1); ++ isp_csi2_irq_status_set(1); ++ isp_csi2_irq_set(1); ++ ++ isp_csi2_enable(1); ++ mdelay(3); ++ break; ++ case ISP_CSIB: ++ ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_CSIB; ++ r = isp_init_csi(config); ++ if (r) ++ return r; ++ break; ++ case ISP_NONE: ++ return 0; ++ default: ++ return -EINVAL; ++ } ++ ++ ispctrl_val &= ~ISPCTRL_SYNC_DETECT_VSRISE; ++ ispctrl_val |= config->hsvs_syncdetect; ++ ++ isp_reg_writel(ispctrl_val, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL); ++ ++ /* Set sensor specific fields in CCDC and Previewer module.*/ ++ isppreview_set_skip(config->prev_sph, config->prev_slv); ++ ispccdc_set_wenlog(config->wenlog); ++ ++ return 0; ++} ++EXPORT_SYMBOL(isp_configure_interface); ++ ++static int isp_buf_process(struct isp_bufs *bufs); ++ ++/** ++ * omap34xx_isp_isr - Interrupt Service Routine for Camera ISP module. ++ * @irq: Not used currently. ++ * @ispirq_disp: Pointer to the object that is passed while request_irq is ++ * called. This is the isp_obj.irq object containing info on the ++ * callback. ++ * ++ * Handles the corresponding callback if plugged in. ++ * ++ * Returns IRQ_HANDLED when IRQ was correctly handled, or IRQ_NONE when the ++ * IRQ wasn't handled. ++ **/ ++static irqreturn_t omap34xx_isp_isr(int irq, void *_isp) ++{ ++ struct isp *isp = _isp; ++ struct isp_irq *irqdis = &isp->irq; ++ struct isp_bufs *bufs = &isp->bufs; ++ unsigned long flags; ++ u32 irqstatus = 0; ++ unsigned long irqflags = 0; ++ int wait_hs_vs = 0; ++ ++ irqstatus = isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); ++ isp_reg_writel(irqstatus, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); ++ ++ spin_lock_irqsave(&bufs->lock, flags); ++ wait_hs_vs = bufs->wait_hs_vs; ++ if (irqstatus & HS_VS && bufs->wait_hs_vs) ++ bufs->wait_hs_vs--; ++ spin_unlock_irqrestore(&bufs->lock, flags); ++ ++ spin_lock_irqsave(&isp_obj.lock, irqflags); ++ /* ++ * We need to wait for the first HS_VS interrupt from CCDC. ++ * Otherwise our frame (and everything else) might be bad. ++ */ ++ if (wait_hs_vs) ++ goto out_ignore_buff; ++ ++ if (irqstatus & CCDC_VD0) { ++ if (RAW_CAPTURE(&isp_obj)) ++ isp_buf_process(bufs); ++ if (!ispccdc_busy()) ++ ispccdc_config_shadow_registers(); ++ } ++ ++ if (irqstatus & PREV_DONE) { ++ if (irqdis->isp_callbk[CBK_PREV_DONE]) ++ irqdis->isp_callbk[CBK_PREV_DONE]( ++ PREV_DONE, ++ irqdis->isp_callbk_arg1[CBK_PREV_DONE], ++ irqdis->isp_callbk_arg2[CBK_PREV_DONE]); ++ else if (!RAW_CAPTURE(&isp_obj) && !ispresizer_busy()) { ++ if (isp_obj.module.applyCrop) { ++ ispresizer_applycrop(); ++ if (!ispresizer_busy()) ++ isp_obj.module.applyCrop = 0; ++ } ++ if (!isppreview_busy()) { ++ ispresizer_enable(1); ++ if (isppreview_busy()) { ++ /* FIXME: locking! */ ++ ISP_BUF_DONE(bufs)->vb_state = ++ VIDEOBUF_ERROR; ++ printk(KERN_ERR "%s: can't stop" ++ " preview\n", __func__); ++ } ++ } ++ if (!isppreview_busy()) ++ isppreview_config_shadow_registers(); ++ if (!isppreview_busy()) ++ isph3a_update_wb(); ++ } ++ } ++ ++ if (irqstatus & RESZ_DONE) { ++ if (!RAW_CAPTURE(&isp_obj)) { ++ if (!ispresizer_busy()) ++ ispresizer_config_shadow_registers(); ++ isp_buf_process(bufs); ++ } ++ } ++ ++ if (irqstatus & H3A_AWB_DONE) { ++ if (irqdis->isp_callbk[CBK_H3A_AWB_DONE]) ++ irqdis->isp_callbk[CBK_H3A_AWB_DONE]( ++ H3A_AWB_DONE, ++ irqdis->isp_callbk_arg1[CBK_H3A_AWB_DONE], ++ irqdis->isp_callbk_arg2[CBK_H3A_AWB_DONE]); ++ } ++ ++ if (irqstatus & HIST_DONE) { ++ if (irqdis->isp_callbk[CBK_HIST_DONE]) ++ irqdis->isp_callbk[CBK_HIST_DONE]( ++ HIST_DONE, ++ irqdis->isp_callbk_arg1[CBK_HIST_DONE], ++ irqdis->isp_callbk_arg2[CBK_HIST_DONE]); ++ } ++ ++ if (irqstatus & H3A_AF_DONE) { ++ if (irqdis->isp_callbk[CBK_H3A_AF_DONE]) ++ irqdis->isp_callbk[CBK_H3A_AF_DONE]( ++ H3A_AF_DONE, ++ irqdis->isp_callbk_arg1[CBK_H3A_AF_DONE], ++ irqdis->isp_callbk_arg2[CBK_H3A_AF_DONE]); ++ } ++ ++ ++out_ignore_buff: ++ if (irqstatus & LSC_PRE_ERR) { ++ struct isp_buf *buf = ISP_BUF_DONE(bufs); ++ /* Mark buffer faulty. */ ++ buf->vb_state = VIDEOBUF_ERROR; ++ ispccdc_lsc_error_handler(); ++ printk(KERN_ERR "%s: lsc prefetch error\n", __func__); ++ } ++ ++ if (irqstatus & CSIA) { ++ struct isp_buf *buf = ISP_BUF_DONE(bufs); ++ isp_csi2_isr(); ++ buf->vb_state = VIDEOBUF_ERROR; ++ } ++ ++ if (irqstatus & IRQ0STATUS_CSIB_IRQ) { ++ u32 ispcsi1_irqstatus; ++ ++ ispcsi1_irqstatus = isp_reg_readl(OMAP3_ISP_IOMEM_CCP2, ++ ISPCSI1_LC01_IRQSTATUS); ++ DPRINTK_ISPCTRL("%x\n", ispcsi1_irqstatus); ++ } ++ ++ if (irqdis->isp_callbk[CBK_CATCHALL]) { ++ irqdis->isp_callbk[CBK_CATCHALL]( ++ irqstatus, ++ irqdis->isp_callbk_arg1[CBK_CATCHALL], ++ irqdis->isp_callbk_arg2[CBK_CATCHALL]); ++ } ++ ++ spin_unlock_irqrestore(&isp_obj.lock, irqflags); ++ ++#if 1 ++ { ++ static const struct { ++ int num; ++ char *name; ++ } bits[] = { ++ { 31, "HS_VS_IRQ" }, ++ { 30, "SEC_ERR_IRQ" }, ++ { 29, "OCP_ERR_IRQ" }, ++ { 28, "MMU_ERR_IRQ" }, ++ { 27, "res27" }, ++ { 26, "res26" }, ++ { 25, "OVF_IRQ" }, ++ { 24, "RSZ_DONE_IRQ" }, ++ { 23, "res23" }, ++ { 22, "res22" }, ++ { 21, "CBUFF_IRQ" }, ++ { 20, "PRV_DONE_IRQ" }, ++ { 19, "CCDC_LSC_PREFETCH_ERROR" }, ++ { 18, "CCDC_LSC_PREFETCH_COMPLETED" }, ++ { 17, "CCDC_LSC_DONE" }, ++ { 16, "HIST_DONE_IRQ" }, ++ { 15, "res15" }, ++ { 14, "res14" }, ++ { 13, "H3A_AWB_DONE_IRQ" }, ++ { 12, "H3A_AF_DONE_IRQ" }, ++ { 11, "CCDC_ERR_IRQ" }, ++ { 10, "CCDC_VD2_IRQ" }, ++ { 9, "CCDC_VD1_IRQ" }, ++ { 8, "CCDC_VD0_IRQ" }, ++ { 7, "res7" }, ++ { 6, "res6" }, ++ { 5, "res5" }, ++ { 4, "CSIB_IRQ" }, ++ { 3, "CSIB_LCM_IRQ" }, ++ { 2, "res2" }, ++ { 1, "res1" }, ++ { 0, "CSIA_IRQ" }, ++ }; ++ int i; ++ for (i = 0; i < ARRAY_SIZE(bits); i++) { ++ if ((1 << bits[i].num) & irqstatus) ++ DPRINTK_ISPCTRL("%s ", bits[i].name); ++ } ++ DPRINTK_ISPCTRL("\n"); ++ } ++#endif ++ ++ return IRQ_HANDLED; ++} ++ ++/* Device name, needed for resource tracking layer */ ++struct device_driver camera_drv = { ++ .name = "camera" ++}; ++ ++struct device camera_dev = { ++ .driver = &camera_drv, ++}; ++ ++/** ++ * isp_tmp_buf_free - To free allocated 10MB memory ++ * ++ **/ ++static void isp_tmp_buf_free(void) ++{ ++ if (isp_obj.tmp_buf) { ++ ispmmu_vfree(isp_obj.tmp_buf); ++ isp_obj.tmp_buf = 0; ++ isp_obj.tmp_buf_size = 0; ++ } ++} ++ ++/** ++ * isp_tmp_buf_alloc - To allocate a 10MB memory ++ * ++ **/ ++static u32 isp_tmp_buf_alloc(size_t size) ++{ ++ isp_tmp_buf_free(); ++ ++ printk(KERN_INFO "%s: allocating %d bytes\n", __func__, size); ++ ++ isp_obj.tmp_buf = ispmmu_vmalloc(size); ++ if (IS_ERR((void *)isp_obj.tmp_buf)) { ++ printk(KERN_ERR "ispmmu_vmap mapping failed "); ++ return -ENOMEM; ++ } ++ isp_obj.tmp_buf_size = size; ++ ++ isppreview_set_outaddr(isp_obj.tmp_buf); ++ ispresizer_set_inaddr(isp_obj.tmp_buf); ++ ++ return 0; ++} ++ ++/** ++ * isp_start - Starts ISP submodule ++ * ++ * Start the needed isp components assuming these components ++ * are configured correctly. ++ **/ ++void isp_start(void) ++{ ++ if (isp_obj.module.isp_pipeline & OMAP_ISP_PREVIEW ++ && is_isppreview_enabled()) ++ isppreview_enable(1); ++ ++ return; ++} ++EXPORT_SYMBOL(isp_start); ++ ++#define ISP_STATISTICS_BUSY \ ++ () ++#define ISP_STOP_TIMEOUT msecs_to_jiffies(1000) ++static int __isp_disable_modules(int suspend) ++{ ++ unsigned long timeout = jiffies + ISP_STOP_TIMEOUT; ++ int reset = 0; ++ ++ /* ++ * We need to stop all the modules after CCDC first or they'll ++ * never stop since they may not get a full frame from CCDC. ++ */ ++ if (suspend) { ++ isp_af_suspend(); ++ isph3a_aewb_suspend(); ++ isp_hist_suspend(); ++ isppreview_suspend(); ++ ispresizer_suspend(); ++ } else { ++ isp_af_enable(0); ++ isph3a_aewb_enable(0); ++ isp_hist_enable(0); ++ isppreview_enable(0); ++ ispresizer_enable(0); ++ } ++ ++ timeout = jiffies + ISP_STOP_TIMEOUT; ++ while (isp_af_busy() ++ || isph3a_aewb_busy() ++ || isp_hist_busy() ++ || isppreview_busy() ++ || ispresizer_busy()) { ++ if (time_after(jiffies, timeout)) { ++ printk(KERN_ERR "%s: can't stop non-ccdc modules\n", ++ __func__); ++ reset = 1; ++ break; ++ } ++ msleep(1); ++ } ++ ++ /* Let's stop CCDC now. */ ++ if (suspend) ++ /* This function supends lsc too */ ++ ispccdc_suspend(); ++ else { ++ ispccdc_enable_lsc(0); ++ ispccdc_enable(0); ++ } ++ ++ timeout = jiffies + ISP_STOP_TIMEOUT; ++ while (ispccdc_busy()) { ++ if (time_after(jiffies, timeout)) { ++ printk(KERN_ERR "%s: can't stop ccdc\n", __func__); ++ reset = 1; ++ break; ++ } ++ msleep(1); ++ } ++ ++ return reset; ++} ++ ++static int isp_stop_modules(void) ++{ ++ return __isp_disable_modules(0); ++} ++ ++static int isp_suspend_modules(void) ++{ ++ return __isp_disable_modules(1); ++} ++ ++static void isp_resume_modules(void) ++{ ++ ispresizer_resume(); ++ isppreview_resume(); ++ isp_hist_resume(); ++ isph3a_aewb_resume(); ++ isp_af_resume(); ++ ispccdc_resume(); ++} ++ ++static void isp_reset(void) ++{ ++ unsigned long timeout = 0; ++ ++ isp_reg_writel(isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG) ++ | ISP_SYSCONFIG_SOFTRESET, ++ OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG); ++ while (!(isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_SYSSTATUS) & 0x1)) { ++ if (timeout++ > 10000) { ++ printk(KERN_ALERT "%s: cannot reset ISP\n", __func__); ++ break; ++ } ++ udelay(1); ++ } ++} ++ ++/** ++ * isp_stop - Stops isp submodules ++ **/ ++void isp_stop() ++{ ++ int reset; ++ ++ isp_disable_interrupts(); ++ reset = isp_stop_modules(); ++ isp_buf_init(); ++ if (!reset) ++ return; ++ ++ isp_save_ctx(); ++ isp_reset(); ++ isp_restore_ctx(); ++} ++EXPORT_SYMBOL(isp_stop); ++ ++static void isp_set_buf(struct isp_buf *buf) ++{ ++ if (isp_obj.module.isp_pipeline & OMAP_ISP_RESIZER ++ && is_ispresizer_enabled()) ++ ispresizer_set_outaddr(buf->isp_addr); ++ else if (isp_obj.module.isp_pipeline & OMAP_ISP_CCDC) ++ ispccdc_set_outaddr(buf->isp_addr); ++ ++} ++ ++/** ++ * isp_calc_pipeline - Sets pipeline depending of input and output pixel format ++ * @pix_input: Pointer to V4L2 pixel format structure for input image. ++ * @pix_output: Pointer to V4L2 pixel format structure for output image. ++ **/ ++static u32 isp_calc_pipeline(struct v4l2_pix_format *pix_input, ++ struct v4l2_pix_format *pix_output) ++{ ++ isp_release_resources(); ++ if ((pix_input->pixelformat == V4L2_PIX_FMT_SGRBG10 ++ || pix_input->pixelformat == V4L2_PIX_FMT_SGRBG10DPCM8) ++ && pix_output->pixelformat != V4L2_PIX_FMT_SGRBG10) { ++ isp_obj.module.isp_pipeline = ++ OMAP_ISP_CCDC | OMAP_ISP_PREVIEW | OMAP_ISP_RESIZER; ++ ispccdc_request(); ++ isppreview_request(); ++ ispresizer_request(); ++ ispccdc_config_datapath(CCDC_RAW, CCDC_OTHERS_VP); ++ isppreview_config_datapath(PRV_RAW_CCDC, PREVIEW_MEM); ++ ispresizer_config_datapath(RSZ_MEM_YUV); ++ } else { ++ isp_obj.module.isp_pipeline = OMAP_ISP_CCDC; ++ ispccdc_request(); ++ if (pix_input->pixelformat == V4L2_PIX_FMT_SGRBG10 ++ || pix_input->pixelformat == V4L2_PIX_FMT_SGRBG10DPCM8) ++ ispccdc_config_datapath(CCDC_RAW, CCDC_OTHERS_VP_MEM); ++ else ++ ispccdc_config_datapath(CCDC_YUV_SYNC, ++ CCDC_OTHERS_MEM); ++ } ++ return 0; ++} ++ ++/** ++ * isp_config_pipeline - Configures the image size and ycpos for ISP submodules ++ * @pix_input: Pointer to V4L2 pixel format structure for input image. ++ * @pix_output: Pointer to V4L2 pixel format structure for output image. ++ * ++ * The configuration of ycpos depends on the output pixel format for both the ++ * Preview and Resizer submodules. ++ **/ ++static void isp_config_pipeline(struct v4l2_pix_format *pix_input, ++ struct v4l2_pix_format *pix_output) ++{ ++ ispccdc_config_size(isp_obj.module.ccdc_input_width, ++ isp_obj.module.ccdc_input_height, ++ isp_obj.module.ccdc_output_width, ++ isp_obj.module.ccdc_output_height); ++ ++ if (isp_obj.module.isp_pipeline & OMAP_ISP_PREVIEW) { ++ isppreview_config_size(isp_obj.module.preview_input_width, ++ isp_obj.module.preview_input_height, ++ isp_obj.module.preview_output_width, ++ isp_obj.module.preview_output_height); ++ } ++ ++ if (isp_obj.module.isp_pipeline & OMAP_ISP_RESIZER) { ++ ispresizer_config_size(isp_obj.module.resizer_input_width, ++ isp_obj.module.resizer_input_height, ++ isp_obj.module.resizer_output_width, ++ isp_obj.module.resizer_output_height); ++ } ++ ++ if (pix_output->pixelformat == V4L2_PIX_FMT_UYVY) { ++ isppreview_config_ycpos(YCPOS_YCrYCb); ++ if (is_ispresizer_enabled()) ++ ispresizer_config_ycpos(0); ++ } else { ++ isppreview_config_ycpos(YCPOS_CrYCbY); ++ if (is_ispresizer_enabled()) ++ ispresizer_config_ycpos(1); ++ } ++ ++ return; ++} ++ ++static void isp_buf_init(void) ++{ ++ struct isp_bufs *bufs = &isp_obj.bufs; ++ int sg; ++ ++ bufs->queue = 0; ++ bufs->done = 0; ++ bufs->wait_hs_vs = isp_obj.config->wait_hs_vs; ++ for (sg = 0; sg < NUM_BUFS; sg++) { ++ bufs->buf[sg].complete = NULL; ++ bufs->buf[sg].vb = NULL; ++ bufs->buf[sg].priv = NULL; ++ } ++} ++ ++/** ++ * isp_vbq_sync - Walks the pages table and flushes the cache for ++ * each page. ++ **/ ++static int isp_vbq_sync(struct videobuf_buffer *vb, int when) ++{ ++ flush_cache_all(); ++ ++ return 0; ++} ++ ++static int isp_buf_process(struct isp_bufs *bufs) ++{ ++ struct isp_buf *buf = NULL; ++ unsigned long flags; ++ int last; ++ ++ spin_lock_irqsave(&bufs->lock, flags); ++ ++ if (ISP_BUFS_IS_EMPTY(bufs)) ++ goto out; ++ ++ if (RAW_CAPTURE(&isp_obj) && ispccdc_sbl_wait_idle(1000)) { ++ printk(KERN_ERR "ccdc %d won't become idle!\n", ++ RAW_CAPTURE(&isp_obj)); ++ goto out; ++ } ++ ++ /* We had at least one buffer in queue. */ ++ buf = ISP_BUF_DONE(bufs); ++ last = ISP_BUFS_IS_LAST(bufs); ++ ++ if (!last) { ++ /* Set new buffer address. */ ++ isp_set_buf(ISP_BUF_NEXT_DONE(bufs)); ++ } else { ++ /* Tell ISP not to write any of our buffers. */ ++ isp_disable_interrupts(); ++ if (RAW_CAPTURE(&isp_obj)) ++ ispccdc_enable(0); ++ else ++ ispresizer_enable(0); ++ /* ++ * We must wait for the HS_VS since before that the ++ * CCDC may trigger interrupts even if it's not ++ * receiving a frame. ++ */ ++ bufs->wait_hs_vs = isp_obj.config->wait_hs_vs; ++ } ++ if ((RAW_CAPTURE(&isp_obj) && ispccdc_busy()) ++ || (!RAW_CAPTURE(&isp_obj) && ispresizer_busy())) { ++ /* ++ * Next buffer available: for the transfer to succeed, the ++ * CCDC (RAW capture) or resizer (YUV capture) must be idle ++ * for the duration of transfer setup. Bad things happen ++ * otherwise! ++ * ++ * Next buffer not available: if we fail to stop the ++ * ISP the buffer is probably going to be bad. ++ */ ++ /* Mark this buffer faulty. */ ++ buf->vb_state = VIDEOBUF_ERROR; ++ /* Mark next faulty, too, in case we have one. */ ++ if (!last) { ++ ISP_BUF_NEXT_DONE(bufs)->vb_state = ++ VIDEOBUF_ERROR; ++ printk(KERN_ALERT "OUCH!!!\n"); ++ } else { ++ printk(KERN_ALERT "Ouch!\n"); ++ } ++ } ++ ++ /* Mark the current buffer as done. */ ++ ISP_BUF_MARK_DONE(bufs); ++ ++ DPRINTK_ISPCTRL(KERN_ALERT "%s: finish %d mmu %p\n", __func__, ++ (bufs->done - 1 + NUM_BUFS) % NUM_BUFS, ++ (bufs->buf+((bufs->done - 1 + NUM_BUFS) ++ % NUM_BUFS))->isp_addr); ++ ++out: ++ spin_unlock_irqrestore(&bufs->lock, flags); ++ ++ if (buf != NULL) { ++ /* ++ * We want to dequeue a buffer from the video buffer ++ * queue. Let's do it! ++ */ ++ isp_vbq_sync(buf->vb, DMA_FROM_DEVICE); ++ buf->vb->state = buf->vb_state; ++ buf->complete(buf->vb, buf->priv); ++ } ++ ++ return 0; ++} ++ ++int isp_buf_queue(struct videobuf_buffer *vb, ++ void (*complete)(struct videobuf_buffer *vb, void *priv), ++ void *priv) ++{ ++ unsigned long flags; ++ struct isp_buf *buf; ++ struct videobuf_dmabuf *dma = videobuf_to_dma(vb); ++ const struct scatterlist *sglist = dma->sglist; ++ struct isp_bufs *bufs = &isp_obj.bufs; ++ int sglen = dma->sglen; ++ ++ BUG_ON(sglen < 0 || !sglist); ++ ++ isp_vbq_sync(vb, DMA_TO_DEVICE); ++ ++ spin_lock_irqsave(&bufs->lock, flags); ++ ++ BUG_ON(ISP_BUFS_IS_FULL(bufs)); ++ ++ buf = ISP_BUF_QUEUE(bufs); ++ ++ buf->isp_addr = bufs->isp_addr_capture[vb->i]; ++ buf->complete = complete; ++ buf->vb = vb; ++ buf->priv = priv; ++ buf->vb_state = VIDEOBUF_DONE; ++ ++ if (ISP_BUFS_IS_EMPTY(bufs)) { ++ isp_enable_interrupts(RAW_CAPTURE(&isp_obj)); ++ isp_set_buf(buf); ++ ispccdc_enable(1); ++ isp_start(); ++ } ++ ++ ISP_BUF_MARK_QUEUED(bufs); ++ ++ spin_unlock_irqrestore(&bufs->lock, flags); ++ ++ DPRINTK_ISPCTRL(KERN_ALERT "%s: queue %d vb %d, mmu %p\n", __func__, ++ (bufs->queue - 1 + NUM_BUFS) % NUM_BUFS, vb->i, ++ buf->isp_addr); ++ ++ return 0; ++} ++EXPORT_SYMBOL(isp_buf_queue); ++ ++int isp_vbq_setup(struct videobuf_queue *vbq, unsigned int *cnt, ++ unsigned int *size) ++{ ++ int rval = 0; ++ size_t tmp_size = PAGE_ALIGN(isp_obj.module.preview_output_width ++ * isp_obj.module.preview_output_height ++ * ISP_BYTES_PER_PIXEL); ++ ++ if (isp_obj.module.isp_pipeline & OMAP_ISP_PREVIEW ++ && isp_obj.tmp_buf_size < tmp_size) ++ rval = isp_tmp_buf_alloc(tmp_size); ++ ++ return rval; ++} ++EXPORT_SYMBOL(isp_vbq_setup); ++ ++/** ++ * isp_vbq_prepare - Videobuffer queue prepare. ++ * @vbq: Pointer to videobuf_queue structure. ++ * @vb: Pointer to videobuf_buffer structure. ++ * @field: Requested Field order for the videobuffer. ++ * ++ * Returns 0 if successful, or -EIO if the ispmmu was unable to map a ++ * scatter-gather linked list data space. ++ **/ ++int isp_vbq_prepare(struct videobuf_queue *vbq, struct videobuf_buffer *vb, ++ enum v4l2_field field) ++{ ++ unsigned int isp_addr; ++ struct videobuf_dmabuf *vdma; ++ struct isp_bufs *bufs = &isp_obj.bufs; ++ ++ int err = 0; ++ ++ vdma = videobuf_to_dma(vb); ++ ++ isp_addr = ispmmu_vmap(vdma->sglist, vdma->sglen); ++ ++ if (IS_ERR_VALUE(isp_addr)) ++ err = -EIO; ++ else ++ bufs->isp_addr_capture[vb->i] = isp_addr; ++ ++ return err; ++} ++EXPORT_SYMBOL(isp_vbq_prepare); ++ ++/** ++ * isp_vbq_release - Videobuffer queue release. ++ * @vbq: Pointer to videobuf_queue structure. ++ * @vb: Pointer to videobuf_buffer structure. ++ **/ ++void isp_vbq_release(struct videobuf_queue *vbq, struct videobuf_buffer *vb) ++{ ++ struct isp_bufs *bufs = &isp_obj.bufs; ++ ++ ispmmu_vunmap(bufs->isp_addr_capture[vb->i]); ++ bufs->isp_addr_capture[vb->i] = (dma_addr_t)NULL; ++ return; ++} ++EXPORT_SYMBOL(isp_vbq_release); ++ ++/** ++ * isp_queryctrl - Query V4L2 control from existing controls in ISP. ++ * @a: Pointer to v4l2_queryctrl structure. It only needs the id field filled. ++ * ++ * Returns 0 if successful, or -EINVAL if not found in ISP. ++ **/ ++int isp_queryctrl(struct v4l2_queryctrl *a) ++{ ++ int i; ++ ++ if (a->id & V4L2_CTRL_FLAG_NEXT_CTRL) { ++ a->id &= ~V4L2_CTRL_FLAG_NEXT_CTRL; ++ i = find_next_vctrl(a->id); ++ } else { ++ i = find_vctrl(a->id); ++ } ++ ++ if (i < 0) ++ return -EINVAL; ++ ++ *a = video_control[i].qc; ++ return 0; ++} ++EXPORT_SYMBOL(isp_queryctrl); ++ ++/** ++ * isp_queryctrl - Query V4L2 control from existing controls in ISP. ++ * @a: Pointer to v4l2_queryctrl structure. It only needs the id field filled. ++ * ++ * Returns 0 if successful, or -EINVAL if not found in ISP. ++ **/ ++int isp_querymenu(struct v4l2_querymenu *a) ++{ ++ int i; ++ ++ i = find_vmenu(a->id, a->index); ++ ++ if (i < 0) ++ return -EINVAL; ++ ++ *a = video_menu[i]; ++ return 0; ++} ++EXPORT_SYMBOL(isp_querymenu); ++ ++/** ++ * isp_g_ctrl - Gets value of the desired V4L2 control. ++ * @a: V4L2 control to read actual value from. ++ * ++ * Return 0 if successful, or -EINVAL if chosen control is not found. ++ **/ ++int isp_g_ctrl(struct v4l2_control *a) ++{ ++ u8 current_value; ++ int rval = 0; ++ ++ if (!isp_obj.ref_count) ++ return -EINVAL; ++ ++ switch (a->id) { ++ case V4L2_CID_BRIGHTNESS: ++ isppreview_query_brightness(¤t_value); ++ a->value = current_value / ISPPRV_BRIGHT_UNITS; ++ break; ++ case V4L2_CID_CONTRAST: ++ isppreview_query_contrast(¤t_value); ++ a->value = current_value / ISPPRV_CONTRAST_UNITS; ++ break; ++ case V4L2_CID_COLORFX: ++ isppreview_get_color(¤t_value); ++ a->value = current_value; ++ break; ++ default: ++ rval = -EINVAL; ++ break; ++ } ++ ++ return rval; ++} ++EXPORT_SYMBOL(isp_g_ctrl); ++ ++/** ++ * isp_s_ctrl - Sets value of the desired V4L2 control. ++ * @a: V4L2 control to read actual value from. ++ * ++ * Return 0 if successful, -EINVAL if chosen control is not found or value ++ * is out of bounds, -EFAULT if copy_from_user or copy_to_user operation fails ++ * from camera abstraction layer related controls or the transfered user space ++ * pointer via the value field is not set properly. ++ **/ ++int isp_s_ctrl(struct v4l2_control *a) ++{ ++ int rval = 0; ++ u8 new_value = a->value; ++ ++ if (!isp_obj.ref_count) ++ return -EINVAL; ++ ++ switch (a->id) { ++ case V4L2_CID_BRIGHTNESS: ++ if (new_value > ISPPRV_BRIGHT_HIGH) ++ rval = -EINVAL; ++ else ++ isppreview_update_brightness(&new_value); ++ break; ++ case V4L2_CID_CONTRAST: ++ if (new_value > ISPPRV_CONTRAST_HIGH) ++ rval = -EINVAL; ++ else ++ isppreview_update_contrast(&new_value); ++ break; ++ case V4L2_CID_COLORFX: ++ if (new_value > V4L2_COLORFX_SEPIA) ++ rval = -EINVAL; ++ else ++ isppreview_set_color(&new_value); ++ break; ++ default: ++ rval = -EINVAL; ++ break; ++ } ++ ++ return rval; ++} ++EXPORT_SYMBOL(isp_s_ctrl); ++ ++/** ++ * isp_handle_private - Handle all private ioctls for isp module. ++ * @cmd: ioctl cmd value ++ * @arg: ioctl arg value ++ * ++ * Return 0 if successful, -EINVAL if chosen cmd value is not handled or value ++ * is out of bounds, -EFAULT if ioctl arg value is not valid. ++ * Function simply routes the input ioctl cmd id to the appropriate handler in ++ * the isp module. ++ **/ ++int isp_handle_private(int cmd, void *arg) ++{ ++ int rval = 0; ++ ++ if (!isp_obj.ref_count) ++ return -EINVAL; ++ ++ switch (cmd) { ++ case VIDIOC_PRIVATE_ISP_CCDC_CFG: ++ rval = omap34xx_isp_ccdc_config(arg); ++ break; ++ case VIDIOC_PRIVATE_ISP_PRV_CFG: ++ rval = omap34xx_isp_preview_config(arg); ++ break; ++ case VIDIOC_PRIVATE_ISP_AEWB_CFG: { ++ struct isph3a_aewb_config *params; ++ params = (struct isph3a_aewb_config *)arg; ++ rval = isph3a_aewb_configure(params); ++ } ++ break; ++ case VIDIOC_PRIVATE_ISP_AEWB_REQ: { ++ struct isph3a_aewb_data *data; ++ data = (struct isph3a_aewb_data *)arg; ++ rval = isph3a_aewb_request_statistics(data); ++ } ++ break; ++ case VIDIOC_PRIVATE_ISP_HIST_CFG: { ++ struct isp_hist_config *params; ++ params = (struct isp_hist_config *)arg; ++ rval = isp_hist_configure(params); ++ } ++ break; ++ case VIDIOC_PRIVATE_ISP_HIST_REQ: { ++ struct isp_hist_data *data; ++ data = (struct isp_hist_data *)arg; ++ rval = isp_hist_request_statistics(data); ++ } ++ break; ++ case VIDIOC_PRIVATE_ISP_AF_CFG: { ++ struct af_configuration *params; ++ params = (struct af_configuration *)arg; ++ rval = isp_af_configure(params); ++ } ++ break; ++ case VIDIOC_PRIVATE_ISP_AF_REQ: { ++ struct isp_af_data *data; ++ data = (struct isp_af_data *)arg; ++ rval = isp_af_request_statistics(data); ++ } ++ break; ++ default: ++ rval = -EINVAL; ++ break; ++ } ++ return rval; ++} ++EXPORT_SYMBOL(isp_handle_private); ++ ++/** ++ * isp_enum_fmt_cap - Gets more information of chosen format index and type ++ * @f: Pointer to structure containing index and type of format to read from. ++ * ++ * Returns 0 if successful, or -EINVAL if format index or format type is ++ * invalid. ++ **/ ++int isp_enum_fmt_cap(struct v4l2_fmtdesc *f) ++{ ++ int index = f->index; ++ enum v4l2_buf_type type = f->type; ++ int rval = -EINVAL; ++ ++ if (index >= NUM_ISP_CAPTURE_FORMATS) ++ goto err; ++ ++ memset(f, 0, sizeof(*f)); ++ f->index = index; ++ f->type = type; ++ ++ switch (f->type) { ++ case V4L2_BUF_TYPE_VIDEO_CAPTURE: ++ rval = 0; ++ break; ++ default: ++ goto err; ++ } ++ ++ f->flags = isp_formats[index].flags; ++ strncpy(f->description, isp_formats[index].description, ++ sizeof(f->description)); ++ f->pixelformat = isp_formats[index].pixelformat; ++err: ++ return rval; ++} ++EXPORT_SYMBOL(isp_enum_fmt_cap); ++ ++/** ++ * isp_g_fmt_cap - Gets current output image format. ++ * @f: Pointer to V4L2 format structure to be filled with current output format ++ **/ ++void isp_g_fmt_cap(struct v4l2_pix_format *pix) ++{ ++ *pix = isp_obj.module.pix; ++ return; ++} ++EXPORT_SYMBOL(isp_g_fmt_cap); ++ ++/** ++ * isp_s_fmt_cap - Sets I/O formats and crop and configures pipeline in ISP ++ * @f: Pointer to V4L2 format structure to be filled with current output format ++ * ++ * Returns 0 if successful, or return value of either isp_try_size or ++ * isp_try_fmt if there is an error. ++ **/ ++int isp_s_fmt_cap(struct v4l2_pix_format *pix_input, ++ struct v4l2_pix_format *pix_output) ++{ ++ int crop_scaling_w = 0, crop_scaling_h = 0; ++ int rval = 0; ++ ++ if (!isp_obj.ref_count) ++ return -EINVAL; ++ ++ rval = isp_calc_pipeline(pix_input, pix_output); ++ if (rval) ++ goto out; ++ ++ rval = isp_try_size(pix_input, pix_output); ++ if (rval) ++ goto out; ++ ++ rval = isp_try_fmt(pix_input, pix_output); ++ if (rval) ++ goto out; ++ ++ if (ispcroprect.width != pix_output->width) { ++ crop_scaling_w = 1; ++ ispcroprect.left = 0; ++ ispcroprect.width = pix_output->width; ++ } ++ ++ if (ispcroprect.height != pix_output->height) { ++ crop_scaling_h = 1; ++ ispcroprect.top = 0; ++ ispcroprect.height = pix_output->height; ++ } ++ ++ isp_config_pipeline(pix_input, pix_output); ++ ++ if (isp_obj.module.isp_pipeline & OMAP_ISP_RESIZER ++ && (crop_scaling_h || crop_scaling_w)) ++ isp_config_crop(pix_output); ++ ++out: ++ return rval; ++} ++EXPORT_SYMBOL(isp_s_fmt_cap); ++ ++/** ++ * isp_config_crop - Configures crop parameters in isp resizer. ++ * @croppix: Pointer to V4L2 pixel format structure containing crop parameters ++ **/ ++void isp_config_crop(struct v4l2_pix_format *croppix) ++{ ++ u8 crop_scaling_w; ++ u8 crop_scaling_h; ++ unsigned long org_left, num_pix, new_top; ++ ++ struct v4l2_pix_format *pix = croppix; ++ ++ crop_scaling_w = (isp_obj.module.preview_output_width * 10) / ++ pix->width; ++ crop_scaling_h = (isp_obj.module.preview_output_height * 10) / ++ pix->height; ++ ++ cur_rect.left = (ispcroprect.left * crop_scaling_w) / 10; ++ cur_rect.top = (ispcroprect.top * crop_scaling_h) / 10; ++ cur_rect.width = (ispcroprect.width * crop_scaling_w) / 10; ++ cur_rect.height = (ispcroprect.height * crop_scaling_h) / 10; ++ ++ org_left = cur_rect.left; ++ while (((int)cur_rect.left & 0xFFFFFFF0) != (int)cur_rect.left) ++ (int)cur_rect.left--; ++ ++ num_pix = org_left - cur_rect.left; ++ new_top = (int)(num_pix * 3) / 4; ++ cur_rect.top = cur_rect.top - new_top; ++ cur_rect.height = (2 * new_top) + cur_rect.height; ++ ++ cur_rect.width = cur_rect.width + (2 * num_pix); ++ while (((int)cur_rect.width & 0xFFFFFFF0) != (int)cur_rect.width) ++ (int)cur_rect.width--; ++ ++ isp_obj.tmp_buf_offset = ++ cur_rect.left * 2 + ++ isp_obj.module.preview_output_width * 2 * cur_rect.top; ++ ++ ispresizer_trycrop(cur_rect.left, cur_rect.top, cur_rect.width, ++ cur_rect.height, ++ isp_obj.module.resizer_output_width, ++ isp_obj.module.resizer_output_height); ++ ++ return; ++} ++EXPORT_SYMBOL(isp_config_crop); ++ ++/** ++ * isp_g_crop - Gets crop rectangle size and position. ++ * @a: Pointer to V4L2 crop structure to be filled. ++ * ++ * Always returns 0. ++ **/ ++int isp_g_crop(struct v4l2_crop *a) ++{ ++ struct v4l2_crop *crop = a; ++ ++ crop->c = ispcroprect; ++ ++ return 0; ++} ++EXPORT_SYMBOL(isp_g_crop); ++ ++/** ++ * isp_s_crop - Sets crop rectangle size and position and queues crop operation ++ * @a: Pointer to V4L2 crop structure with desired parameters. ++ * @pix: Pointer to V4L2 pixel format structure with desired parameters. ++ * ++ * Returns 0 if successful, or -EINVAL if crop parameters are out of bounds. ++ **/ ++int isp_s_crop(struct v4l2_crop *a, struct v4l2_pix_format *pix) ++{ ++ struct v4l2_crop *crop = a; ++ int rval = 0; ++ ++ if (!isp_obj.ref_count) ++ return -EINVAL; ++ ++ if (crop->c.left < 0) ++ crop->c.left = 0; ++ if (crop->c.width < 0) ++ crop->c.width = 0; ++ if (crop->c.top < 0) ++ crop->c.top = 0; ++ if (crop->c.height < 0) ++ crop->c.height = 0; ++ ++ if (crop->c.left >= pix->width) ++ crop->c.left = pix->width - 1; ++ if (crop->c.top >= pix->height) ++ crop->c.top = pix->height - 1; ++ ++ if (crop->c.left + crop->c.width > pix->width) ++ crop->c.width = pix->width - crop->c.left; ++ if (crop->c.top + crop->c.height > pix->height) ++ crop->c.height = pix->height - crop->c.top; ++ ++ ispcroprect.left = crop->c.left; ++ ispcroprect.top = crop->c.top; ++ ispcroprect.width = crop->c.width; ++ ispcroprect.height = crop->c.height; ++ ++ isp_config_crop(pix); ++ ++ isp_obj.module.applyCrop = 1; ++ ++ return rval; ++} ++EXPORT_SYMBOL(isp_s_crop); ++ ++/** ++ * isp_try_fmt_cap - Tries desired input/output image formats ++ * @pix_input: Pointer to V4L2 pixel format structure for input image. ++ * @pix_output: Pointer to V4L2 pixel format structure for output image. ++ * ++ * Returns 0 if successful, or return value of either isp_try_size or ++ * isp_try_fmt if there is an error. ++ **/ ++int isp_try_fmt_cap(struct v4l2_pix_format *pix_input, ++ struct v4l2_pix_format *pix_output) ++{ ++ int rval = 0; ++ ++ rval = isp_calc_pipeline(pix_input, pix_output); ++ if (rval) ++ goto out; ++ ++ rval = isp_try_size(pix_input, pix_output); ++ if (rval) ++ goto out; ++ ++ rval = isp_try_fmt(pix_input, pix_output); ++ if (rval) ++ goto out; ++ ++out: ++ return rval; ++} ++EXPORT_SYMBOL(isp_try_fmt_cap); ++ ++/** ++ * isp_try_size - Tries size configuration for I/O images of each ISP submodule ++ * @pix_input: Pointer to V4L2 pixel format structure for input image. ++ * @pix_output: Pointer to V4L2 pixel format structure for output image. ++ * ++ * Returns 0 if successful, or return value of ispccdc_try_size, ++ * isppreview_try_size, or ispresizer_try_size (depending on the pipeline ++ * configuration) if there is an error. ++ **/ ++static int isp_try_size(struct v4l2_pix_format *pix_input, ++ struct v4l2_pix_format *pix_output) ++{ ++ int rval = 0; ++ ++ if (pix_output->width <= ISPRSZ_MIN_OUTPUT ++ || pix_output->height <= ISPRSZ_MIN_OUTPUT) ++ return -EINVAL; ++ ++ if (pix_output->width >= ISPRSZ_MAX_OUTPUT ++ || pix_output->height > ISPRSZ_MAX_OUTPUT) ++ return -EINVAL; ++ ++ isp_obj.module.ccdc_input_width = pix_input->width; ++ isp_obj.module.ccdc_input_height = pix_input->height; ++ isp_obj.module.resizer_output_width = pix_output->width; ++ isp_obj.module.resizer_output_height = pix_output->height; ++ ++ if (isp_obj.module.isp_pipeline & OMAP_ISP_CCDC) { ++ rval = ispccdc_try_size(isp_obj.module.ccdc_input_width, ++ isp_obj.module.ccdc_input_height, ++ &isp_obj.module.ccdc_output_width, ++ &isp_obj.module.ccdc_output_height); ++ if (rval) { ++ printk(KERN_ERR "ISP_ERR: The dimensions %dx%d are not" ++ " supported\n", pix_input->width, ++ pix_input->height); ++ return rval; ++ } ++ pix_output->width = isp_obj.module.ccdc_output_width; ++ pix_output->height = isp_obj.module.ccdc_output_height; ++ } ++ ++ if (isp_obj.module.isp_pipeline & OMAP_ISP_PREVIEW) { ++ isp_obj.module.preview_input_width = ++ isp_obj.module.ccdc_output_width; ++ isp_obj.module.preview_input_height = ++ isp_obj.module.ccdc_output_height; ++ rval = isppreview_try_size( ++ isp_obj.module.preview_input_width, ++ isp_obj.module.preview_input_height, ++ &isp_obj.module.preview_output_width, ++ &isp_obj.module.preview_output_height); ++ if (rval) { ++ printk(KERN_ERR "ISP_ERR: The dimensions %dx%d are not" ++ " supported\n", pix_input->width, ++ pix_input->height); ++ return rval; ++ } ++ pix_output->width = isp_obj.module.preview_output_width; ++ pix_output->height = isp_obj.module.preview_output_height; ++ } ++ ++ if (isp_obj.module.isp_pipeline & OMAP_ISP_RESIZER) { ++ isp_obj.module.resizer_input_width = ++ isp_obj.module.preview_output_width; ++ isp_obj.module.resizer_input_height = ++ isp_obj.module.preview_output_height; ++ rval = ispresizer_try_size( ++ &isp_obj.module.resizer_input_width, ++ &isp_obj.module.resizer_input_height, ++ &isp_obj.module.resizer_output_width, ++ &isp_obj.module.resizer_output_height); ++ if (rval) { ++ printk(KERN_ERR "ISP_ERR: The dimensions %dx%d are not" ++ " supported\n", pix_input->width, ++ pix_input->height); ++ return rval; ++ } ++ pix_output->width = isp_obj.module.resizer_output_width; ++ pix_output->height = isp_obj.module.resizer_output_height; ++ } ++ ++ return rval; ++} ++ ++/** ++ * isp_try_fmt - Validates input/output format parameters. ++ * @pix_input: Pointer to V4L2 pixel format structure for input image. ++ * @pix_output: Pointer to V4L2 pixel format structure for output image. ++ * ++ * Always returns 0. ++ **/ ++int isp_try_fmt(struct v4l2_pix_format *pix_input, ++ struct v4l2_pix_format *pix_output) ++{ ++ int ifmt; ++ ++ for (ifmt = 0; ifmt < NUM_ISP_CAPTURE_FORMATS; ifmt++) { ++ if (pix_output->pixelformat == isp_formats[ifmt].pixelformat) ++ break; ++ } ++ if (ifmt == NUM_ISP_CAPTURE_FORMATS) ++ ifmt = 1; ++ pix_output->pixelformat = isp_formats[ifmt].pixelformat; ++ pix_output->field = V4L2_FIELD_NONE; ++ pix_output->bytesperline = pix_output->width * ISP_BYTES_PER_PIXEL; ++ pix_output->sizeimage = ++ PAGE_ALIGN(pix_output->bytesperline * pix_output->height); ++ pix_output->priv = 0; ++ switch (pix_output->pixelformat) { ++ case V4L2_PIX_FMT_YUYV: ++ case V4L2_PIX_FMT_UYVY: ++ pix_output->colorspace = V4L2_COLORSPACE_JPEG; ++ break; ++ default: ++ pix_output->colorspace = V4L2_COLORSPACE_SRGB; ++ } ++ ++ isp_obj.module.pix.pixelformat = pix_output->pixelformat; ++ isp_obj.module.pix.width = pix_output->width; ++ isp_obj.module.pix.height = pix_output->height; ++ isp_obj.module.pix.field = pix_output->field; ++ isp_obj.module.pix.bytesperline = pix_output->bytesperline; ++ isp_obj.module.pix.sizeimage = pix_output->sizeimage; ++ isp_obj.module.pix.priv = pix_output->priv; ++ isp_obj.module.pix.colorspace = pix_output->colorspace; ++ ++ return 0; ++} ++EXPORT_SYMBOL(isp_try_fmt); ++ ++/** ++ * isp_save_ctx - Saves ISP, CCDC, HIST, H3A, PREV, RESZ & MMU context. ++ * ++ * Routine for saving the context of each module in the ISP. ++ * CCDC, HIST, H3A, PREV, RESZ and MMU. ++ **/ ++static void isp_save_ctx(void) ++{ ++ isp_save_context(isp_reg_list); ++ ispccdc_save_context(); ++ ispmmu_save_context(); ++ isphist_save_context(); ++ isph3a_save_context(); ++ isppreview_save_context(); ++ ispresizer_save_context(); ++} ++ ++/** ++ * isp_restore_ctx - Restores ISP, CCDC, HIST, H3A, PREV, RESZ & MMU context. ++ * ++ * Routine for restoring the context of each module in the ISP. ++ * CCDC, HIST, H3A, PREV, RESZ and MMU. ++ **/ ++static void isp_restore_ctx(void) ++{ ++ isp_restore_context(isp_reg_list); ++ ispccdc_restore_context(); ++ ispmmu_restore_context(); ++ isphist_restore_context(); ++ isph3a_restore_context(); ++ isppreview_restore_context(); ++ ispresizer_restore_context(); ++} ++ ++static int isp_enable_clocks(void) ++{ ++ int r; ++ ++ r = clk_enable(isp_obj.cam_ick); ++ if (r) { ++ DPRINTK_ISPCTRL("ISP_ERR: clk_en for ick failed\n"); ++ goto out_clk_enable_ick; ++ } ++ r = clk_enable(isp_obj.cam_mclk); ++ if (r) { ++ DPRINTK_ISPCTRL("ISP_ERR: clk_en for mclk failed\n"); ++ goto out_clk_enable_mclk; ++ } ++ r = clk_enable(isp_obj.csi2_fck); ++ if (r) { ++ DPRINTK_ISPCTRL("ISP_ERR: clk_en for csi2_fclk" ++ " failed\n"); ++ goto out_clk_enable_csi2_fclk; ++ } ++ return 0; ++ ++out_clk_enable_csi2_fclk: ++ clk_disable(isp_obj.cam_mclk); ++out_clk_enable_mclk: ++ clk_disable(isp_obj.cam_ick); ++out_clk_enable_ick: ++ return r; ++} ++ ++static void isp_disable_clocks(void) ++{ ++ clk_disable(isp_obj.cam_ick); ++ clk_disable(isp_obj.cam_mclk); ++ clk_disable(isp_obj.csi2_fck); ++} ++ ++/** ++ * isp_get - Adquires the ISP resource. ++ * ++ * Initializes the clocks for the first acquire. ++ **/ ++int isp_get(void) ++{ ++ static int has_context; ++ int ret_err = 0; ++ ++ if (omap3isp == NULL) ++ return -EBUSY; ++ ++ DPRINTK_ISPCTRL("isp_get: old %d\n", isp_obj.ref_count); ++ mutex_lock(&(isp_obj.isp_mutex)); ++ if (isp_obj.ref_count == 0) { ++ ret_err = isp_enable_clocks(); ++ if (ret_err) ++ goto out_err; ++ /* We don't want to restore context before saving it! */ ++ if (has_context) ++ isp_restore_ctx(); ++ else ++ has_context = 1; ++ } else { ++ mutex_unlock(&isp_obj.isp_mutex); ++ return -EBUSY; ++ } ++ isp_obj.ref_count++; ++ mutex_unlock(&(isp_obj.isp_mutex)); ++ ++ DPRINTK_ISPCTRL("isp_get: new %d\n", isp_obj.ref_count); ++ return isp_obj.ref_count; ++ ++out_err: ++ mutex_unlock(&(isp_obj.isp_mutex)); ++ return ret_err; ++} ++EXPORT_SYMBOL(isp_get); ++ ++/** ++ * isp_put - Releases the ISP resource. ++ * ++ * Releases the clocks also for the last release. ++ **/ ++int isp_put(void) ++{ ++ if (omap3isp == NULL) ++ return -EBUSY; ++ ++ DPRINTK_ISPCTRL("isp_put: old %d\n", isp_obj.ref_count); ++ mutex_lock(&(isp_obj.isp_mutex)); ++ if (isp_obj.ref_count) { ++ if (--isp_obj.ref_count == 0) { ++ isp_save_ctx(); ++ isp_tmp_buf_free(); ++ isp_release_resources(); ++ isp_obj.module.isp_pipeline = 0; ++ isp_disable_clocks(); ++ memset(&ispcroprect, 0, sizeof(ispcroprect)); ++ memset(&cur_rect, 0, sizeof(cur_rect)); ++ } ++ } ++ mutex_unlock(&(isp_obj.isp_mutex)); ++ DPRINTK_ISPCTRL("isp_put: new %d\n", isp_obj.ref_count); ++ return isp_obj.ref_count; ++} ++EXPORT_SYMBOL(isp_put); ++ ++/** ++ * isp_save_context - Saves the values of the ISP module registers. ++ * @reg_list: Structure containing pairs of register address and value to ++ * modify on OMAP. ++ **/ ++void isp_save_context(struct isp_reg *reg_list) ++{ ++ struct isp_reg *next = reg_list; ++ ++ for (; next->reg != ISP_TOK_TERM; next++) ++ next->val = isp_reg_readl(next->mmio_range, next->reg); ++} ++EXPORT_SYMBOL(isp_save_context); ++ ++/** ++ * isp_restore_context - Restores the values of the ISP module registers. ++ * @reg_list: Structure containing pairs of register address and value to ++ * modify on OMAP. ++ **/ ++void isp_restore_context(struct isp_reg *reg_list) ++{ ++ struct isp_reg *next = reg_list; ++ ++ for (; next->reg != ISP_TOK_TERM; next++) ++ isp_reg_writel(next->val, next->mmio_range, next->reg); ++} ++EXPORT_SYMBOL(isp_restore_context); ++ ++static int isp_remove(struct platform_device *pdev) ++{ ++ struct isp_device *isp = platform_get_drvdata(pdev); ++ int i; ++ ++ isp_csi2_cleanup(); ++ isp_af_exit(); ++ isp_resizer_cleanup(); ++ isp_preview_cleanup(); ++ ispmmu_cleanup(); ++ isph3a_aewb_cleanup(); ++ isp_hist_cleanup(); ++ isp_ccdc_cleanup(); ++ ++ if (!isp) ++ return 0; ++ ++ clk_put(isp_obj.cam_ick); ++ clk_put(isp_obj.cam_mclk); ++ clk_put(isp_obj.csi2_fck); ++ ++ free_irq(isp->irq, &isp_obj); ++ ++ for (i = 0; i <= OMAP3_ISP_IOMEM_CSI2PHY; i++) { ++ if (isp->mmio_base[i]) { ++ iounmap((void *)isp->mmio_base[i]); ++ isp->mmio_base[i] = 0; ++ } ++ ++ if (isp->mmio_base_phys[i]) { ++ release_mem_region(isp->mmio_base_phys[i], ++ isp->mmio_size[i]); ++ isp->mmio_base_phys[i] = 0; ++ } ++ } ++ ++ omap3isp = NULL; ++ ++ kfree(isp); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++ ++static int isp_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ int reset; ++ ++ mutex_lock(&(isp_obj.isp_mutex)); ++ DPRINTK_ISPCTRL("isp_suspend: starting\n"); ++ if (isp_obj.ref_count == 0) ++ goto out; ++ ++ isp_disable_interrupts(); ++ reset = isp_suspend_modules(); ++ isp_save_ctx(); ++ if (reset) ++ isp_reset(); ++ ++ isp_disable_clocks(); ++ ++out: ++ DPRINTK_ISPCTRL("isp_suspend: done\n"); ++ mutex_unlock(&(isp_obj.isp_mutex)); ++ return 0; ++} ++ ++static int isp_resume(struct platform_device *pdev) ++{ ++ int ret_err = 0; ++ ++ DPRINTK_ISPCTRL("isp_resume: starting\n"); ++ ++ if (omap3isp == NULL) ++ goto out; ++ ++ if (isp_obj.ref_count >= 0) { ++ ret_err = isp_enable_clocks(); ++ if (ret_err) ++ goto out; ++ isp_restore_ctx(); ++ isp_resume_modules(); ++ isp_enable_interrupts(RAW_CAPTURE(&isp_obj)); ++ isp_start(); ++ } ++ ++out: ++ DPRINTK_ISPCTRL("isp_resume: done \n"); ++ return ret_err; ++} ++ ++#else ++ ++#define isp_suspend NULL ++#define isp_resume NULL ++ ++#endif /* CONFIG_PM */ ++ ++ ++static int isp_probe(struct platform_device *pdev) ++{ ++ struct isp_device *isp; ++ int ret_err = 0; ++ int i; ++ ++ isp = kzalloc(sizeof(*isp), GFP_KERNEL); ++ if (!isp) { ++ dev_err(&pdev->dev, "could not allocate memory\n"); ++ return -ENOMEM; ++ } ++ ++ platform_set_drvdata(pdev, isp); ++ ++ isp->dev = &pdev->dev; ++ ++ for (i = 0; i <= OMAP3_ISP_IOMEM_CSI2PHY; i++) { ++ struct resource *mem; ++ /* request the mem region for the camera registers */ ++ mem = platform_get_resource(pdev, IORESOURCE_MEM, i); ++ if (!mem) { ++ dev_err(isp->dev, "no mem resource?\n"); ++ return -ENODEV; ++ } ++ ++ if (!request_mem_region(mem->start, mem->end - mem->start + 1, ++ pdev->name)) { ++ dev_err(isp->dev, ++ "cannot reserve camera register I/O region\n"); ++ return -ENODEV; ++ ++ } ++ isp->mmio_base_phys[i] = mem->start; ++ isp->mmio_size[i] = mem->end - mem->start + 1; ++ ++ /* map the region */ ++ isp->mmio_base[i] = (unsigned long) ++ ioremap_nocache(isp->mmio_base_phys[i], ++ isp->mmio_size[i]); ++ if (!isp->mmio_base[i]) { ++ dev_err(isp->dev, ++ "cannot map camera register I/O region\n"); ++ return -ENODEV; ++ } ++ } ++ ++ isp->irq = platform_get_irq(pdev, 0); ++ if (isp->irq <= 0) { ++ dev_err(isp->dev, "no irq for camera?\n"); ++ return -ENODEV; ++ } ++ ++ isp_obj.cam_ick = clk_get(&camera_dev, "cam_ick"); ++ if (IS_ERR(isp_obj.cam_ick)) { ++ DPRINTK_ISPCTRL("ISP_ERR: clk_get for " ++ "cam_ick failed\n"); ++ return PTR_ERR(isp_obj.cam_ick); ++ } ++ isp_obj.cam_mclk = clk_get(&camera_dev, "cam_mclk"); ++ if (IS_ERR(isp_obj.cam_mclk)) { ++ DPRINTK_ISPCTRL("ISP_ERR: clk_get for " ++ "cam_mclk failed\n"); ++ ret_err = PTR_ERR(isp_obj.cam_mclk); ++ goto out_clk_get_mclk; ++ } ++ isp_obj.csi2_fck = clk_get(&camera_dev, "csi2_96m_fck"); ++ if (IS_ERR(isp_obj.csi2_fck)) { ++ DPRINTK_ISPCTRL("ISP_ERR: clk_get for csi2_fclk" ++ " failed\n"); ++ ret_err = PTR_ERR(isp_obj.csi2_fck); ++ goto out_clk_get_csi2_fclk; ++ } ++ ++ if (request_irq(isp->irq, omap34xx_isp_isr, IRQF_SHARED, ++ "Omap 3 Camera ISP", &isp_obj)) { ++ DPRINTK_ISPCTRL("Could not install ISR\n"); ++ ret_err = -EINVAL; ++ goto out_request_irq; ++ } ++ ++ isp_obj.ref_count = 0; ++ ++ mutex_init(&(isp_obj.isp_mutex)); ++ spin_lock_init(&isp_obj.lock); ++ spin_lock_init(&isp_obj.bufs.lock); ++ ++ omap3isp = isp; ++ ++ ret_err = ispmmu_init(); ++ if (ret_err) ++ goto out_ispmmu_init; ++ ++ isp_ccdc_init(); ++ isp_hist_init(); ++ isph3a_aewb_init(); ++ isp_preview_init(); ++ isp_resizer_init(); ++ isp_af_init(); ++ isp_csi2_init(); ++ ++ isp_get(); ++ isp_power_settings(1); ++ isp_put(); ++ ++ isph3a_notify(1); ++ isp_af_notify(1); ++ ++ return 0; ++ ++out_ispmmu_init: ++ omap3isp = NULL; ++ free_irq(isp->irq, &isp_obj); ++out_request_irq: ++ clk_put(isp_obj.csi2_fck); ++out_clk_get_csi2_fclk: ++ clk_put(isp_obj.cam_mclk); ++out_clk_get_mclk: ++ clk_put(isp_obj.cam_ick); ++ ++ return ret_err; ++} ++ ++static struct platform_driver omap3isp_driver = { ++ .probe = isp_probe, ++ .remove = isp_remove, ++ .suspend = isp_suspend, ++ .resume = isp_resume, ++ .driver = { ++ .name = "omap3isp", ++ }, ++}; ++ ++/** ++ * isp_init - ISP module initialization. ++ **/ ++static int __init isp_init(void) ++{ ++ return platform_driver_register(&omap3isp_driver); ++} ++ ++/** ++ * isp_cleanup - ISP module cleanup. ++ **/ ++static void __exit isp_cleanup(void) ++{ ++ platform_driver_unregister(&omap3isp_driver); ++} ++ ++/** ++ * isp_print_status - Prints the values of the ISP Control Module registers ++ * ++ * Also prints other debug information stored in the ISP module structure. ++ **/ ++void isp_print_status(void) ++{ ++ if (!is_ispctrl_debug_enabled()) ++ return; ++ ++ DPRINTK_ISPCTRL("###ISP_CTRL=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_CTRL)); ++ DPRINTK_ISPCTRL("###ISP_TCTRL_CTRL=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL)); ++ DPRINTK_ISPCTRL("###ISP_SYSCONFIG=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG)); ++ DPRINTK_ISPCTRL("###ISP_SYSSTATUS=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_SYSSTATUS)); ++ DPRINTK_ISPCTRL("###ISP_IRQ0ENABLE=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE)); ++ DPRINTK_ISPCTRL("###ISP_IRQ0STATUS=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS)); ++} ++EXPORT_SYMBOL(isp_print_status); ++ ++module_init(isp_init); ++module_exit(isp_cleanup); ++ ++MODULE_AUTHOR("Texas Instruments"); ++MODULE_DESCRIPTION("ISP Control Module Library"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/media/video/isp/isp.h b/drivers/media/video/isp/isp.h +new file mode 100644 +index 0000000..55c98a9 +--- /dev/null ++++ b/drivers/media/video/isp/isp.h +@@ -0,0 +1,318 @@ ++/* ++ * isp.h ++ * ++ * Top level public header file for ISP Control module in ++ * TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments. ++ * Copyright (C) 2009 Nokia. ++ * ++ * Contributors: ++ * Sameer Venkatraman ++ * Mohit Jalori ++ * Sergio Aguirre ++ * Sakari Ailus ++ * Tuukka Toivonen ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#ifndef OMAP_ISP_TOP_H ++#define OMAP_ISP_TOP_H ++#include ++#include ++#include ++#define OMAP_ISP_CCDC (1 << 0) ++#define OMAP_ISP_PREVIEW (1 << 1) ++#define OMAP_ISP_RESIZER (1 << 2) ++#define OMAP_ISP_AEWB (1 << 3) ++#define OMAP_ISP_AF (1 << 4) ++#define OMAP_ISP_HIST (1 << 5) ++ ++#define ISP_TOK_TERM 0xFFFFFFFF /* ++ * terminating token for ISP ++ * modules reg list ++ */ ++#define NUM_BUFS VIDEO_MAX_FRAME ++ ++#ifndef CONFIG_ARCH_OMAP3410 ++#define USE_ISP_PREVIEW ++#define USE_ISP_RESZ ++#define is_isppreview_enabled() 1 ++#define is_ispresizer_enabled() 1 ++#else ++#define is_isppreview_enabled() 0 ++#define is_ispresizer_enabled() 0 ++#endif ++ ++#define ISP_BYTES_PER_PIXEL 2 ++#define NUM_ISP_CAPTURE_FORMATS (sizeof(isp_formats) / \ ++ sizeof(isp_formats[0])) ++typedef int (*isp_vbq_callback_ptr) (struct videobuf_buffer *vb); ++typedef void (*isp_callback_t) (unsigned long status, ++ isp_vbq_callback_ptr arg1, void *arg2); ++ ++enum isp_mem_resources { ++ OMAP3_ISP_IOMEM_MAIN, ++ OMAP3_ISP_IOMEM_CBUFF, ++ OMAP3_ISP_IOMEM_CCP2, ++ OMAP3_ISP_IOMEM_CCDC, ++ OMAP3_ISP_IOMEM_HIST, ++ OMAP3_ISP_IOMEM_H3A, ++ OMAP3_ISP_IOMEM_PREV, ++ OMAP3_ISP_IOMEM_RESZ, ++ OMAP3_ISP_IOMEM_SBL, ++ OMAP3_ISP_IOMEM_CSI2A, ++ OMAP3_ISP_IOMEM_CSI2PHY ++}; ++ ++struct isp_device { ++ struct device *dev; ++ ++ /*** platform HW resources ***/ ++ unsigned int irq; ++ ++#define mmio_base_main mmio_base[OMAP3_ISP_IOMEM_MAIN] ++#define mmio_cbuff_main mmio_base[OMAP3_ISP_IOMEM_CBUFF] ++#define mmio_ccp2_main mmio_base[OMAP3_ISP_IOMEM_CCP2] ++#define mmio_ccdc_main mmio_base[OMAP3_ISP_IOMEM_CCDC] ++#define mmio_hist_main mmio_base[OMAP3_ISP_IOMEM_HIST] ++#define mmio_h3a_main mmio_base[OMAP3_ISP_IOMEM_H3A] ++#define mmio_prev_main mmio_base[OMAP3_ISP_IOMEM_PREV] ++#define mmio_resz_main mmio_base[OMAP3_ISP_IOMEM_RESZ] ++#define mmio_sbl_main mmio_base[OMAP3_ISP_IOMEM_SBL] ++#define mmio_csi2_main mmio_base[OMAP3_ISP_IOMEM_CSI2A] ++#define mmio_csi2phy_main mmio_base[OMAP3_ISP_IOMEM_CSI2PHY] ++ unsigned long mmio_base[OMAP3_ISP_IOMEM_CSI2PHY + 1]; ++ unsigned long mmio_base_phys[OMAP3_ISP_IOMEM_CSI2PHY + 1]; ++ unsigned long mmio_size[OMAP3_ISP_IOMEM_CSI2PHY + 1]; ++}; ++ ++enum isp_interface_type { ++ ISP_PARLL = 1, ++ ISP_CSIA = 2, ++ ISP_CSIB = 4, ++ ISP_NONE = 8 /* memory input to preview / resizer */ ++}; ++ ++enum isp_irqevents { ++ CSIA = 0x01, ++ CSIB = 0x10, ++ CCDC_VD0 = 0x100, ++ CCDC_VD1 = 0x200, ++ CCDC_VD2 = 0x400, ++ CCDC_ERR = 0x800, ++ H3A_AWB_DONE = 0x2000, ++ H3A_AF_DONE = 0x1000, ++ HIST_DONE = 0x10000, ++ PREV_DONE = 0x100000, ++ LSC_DONE = 0x20000, ++ LSC_PRE_COMP = 0x40000, ++ LSC_PRE_ERR = 0x80000, ++ RESZ_DONE = 0x1000000, ++ SBL_OVF = 0x2000000, ++ MMU_ERR = 0x10000000, ++ OCP_ERR = 0x20000000, ++ HS_VS = 0x80000000 ++}; ++ ++enum isp_callback_type { ++ CBK_CCDC_VD0, ++ CBK_CCDC_VD1, ++ CBK_PREV_DONE, ++ CBK_RESZ_DONE, ++ CBK_MMU_ERR, ++ CBK_H3A_AWB_DONE, ++ CBK_HIST_DONE, ++ CBK_HS_VS, ++ CBK_LSC_ISR, ++ CBK_H3A_AF_DONE, ++ CBK_CATCHALL, ++ CBK_CSIA, ++ CBK_CSIB, ++ CBK_END, ++}; ++ ++/** ++ * struct isp_reg - Structure for ISP register values. ++ * @reg: 32-bit Register address. ++ * @val: 32-bit Register value. ++ */ ++struct isp_reg { ++ enum isp_mem_resources mmio_range; ++ u32 reg; ++ u32 val; ++}; ++ ++/** ++ * struct isp_interface_config - ISP interface configuration. ++ * @ccdc_par_ser: ISP interface type. 0 - Parallel, 1 - CSIA, 2 - CSIB to CCDC. ++ * @par_bridge: CCDC Bridge input control. Parallel interface. ++ * 0 - Disable, 1 - Enable, first byte->cam_d(bits 7 to 0) ++ * 2 - Enable, first byte -> cam_d(bits 15 to 8) ++ * @par_clk_pol: Pixel clock polarity on the parallel interface. ++ * 0 - Non Inverted, 1 - Inverted ++ * @dataline_shift: Data lane shifter. ++ * 0 - No Shift, 1 - CAMEXT[13 to 2]->CAM[11 to 0] ++ * 2 - CAMEXT[13 to 4]->CAM[9 to 0] ++ * 3 - CAMEXT[13 to 6]->CAM[7 to 0] ++ * @hsvs_syncdetect: HS or VS synchronization signal detection. ++ * 0 - HS Falling, 1 - HS rising ++ * 2 - VS falling, 3 - VS rising ++ * @strobe: Strobe related parameter. ++ * @prestrobe: PreStrobe related parameter. ++ * @shutter: Shutter related parameter. ++ * @hskip: Horizontal Start Pixel performed in Preview module. ++ * @vskip: Vertical Start Line performed in Preview module. ++ * @wenlog: Store the value for the sensor specific wenlog field. ++ * @wait_hs_vs: Wait for this many hs_vs before anything else in the beginning. ++ */ ++struct isp_interface_config { ++ enum isp_interface_type ccdc_par_ser; ++ u8 dataline_shift; ++ u32 hsvs_syncdetect; ++ int strobe; ++ int prestrobe; ++ int shutter; ++ u32 prev_sph; ++ u32 prev_slv; ++ u32 wenlog; ++ int wait_hs_vs; ++ union { ++ struct par { ++ unsigned par_bridge:2; ++ unsigned par_clk_pol:1; ++ } par; ++ struct csi { ++ unsigned crc:1; ++ unsigned mode:1; ++ unsigned edge:1; ++ unsigned signalling:1; ++ unsigned strobe_clock_inv:1; ++ unsigned vs_edge:1; ++ unsigned channel:3; ++ unsigned vpclk:2; /* Video port output clock */ ++ unsigned int data_start; ++ unsigned int data_size; ++ u32 format; /* V4L2_PIX_FMT_* */ ++ } csi; ++ } u; ++}; ++ ++u32 isp_reg_readl(enum isp_mem_resources isp_mmio_range, u32 reg_offset); ++ ++void isp_reg_writel(u32 reg_value, enum isp_mem_resources isp_mmio_range, ++ u32 reg_offset); ++ ++static inline void isp_reg_and(enum isp_mem_resources mmio_range, u32 reg, ++ u32 and_bits) ++{ ++ u32 v = isp_reg_readl(mmio_range, reg); ++ ++ isp_reg_writel(v & and_bits, mmio_range, reg); ++} ++ ++static inline void isp_reg_or(enum isp_mem_resources mmio_range, u32 reg, ++ u32 or_bits) ++{ ++ u32 v = isp_reg_readl(mmio_range, reg); ++ ++ isp_reg_writel(v | or_bits, mmio_range, reg); ++} ++ ++static inline void isp_reg_and_or(enum isp_mem_resources mmio_range, u32 reg, ++ u32 and_bits, u32 or_bits) ++{ ++ u32 v = isp_reg_readl(mmio_range, reg); ++ ++ isp_reg_writel((v & and_bits) | or_bits, mmio_range, reg); ++} ++ ++void isp_start(void); ++ ++void isp_stop(void); ++ ++int isp_buf_queue(struct videobuf_buffer *vb, ++ void (*complete)(struct videobuf_buffer *vb, void *priv), ++ void *priv); ++ ++int isp_vbq_setup(struct videobuf_queue *vbq, unsigned int *cnt, ++ unsigned int *size); ++ ++int isp_vbq_prepare(struct videobuf_queue *vbq, struct videobuf_buffer *vb, ++ enum v4l2_field field); ++ ++void isp_vbq_release(struct videobuf_queue *vbq, struct videobuf_buffer *vb); ++ ++int isp_set_callback(enum isp_callback_type type, isp_callback_t callback, ++ isp_vbq_callback_ptr arg1, void *arg2); ++ ++int isp_unset_callback(enum isp_callback_type type); ++ ++u32 isp_set_xclk(u32 xclk, u8 xclksel); ++ ++int isp_configure_interface(struct isp_interface_config *config); ++ ++int isp_get(void); ++ ++int isp_put(void); ++ ++int isp_queryctrl(struct v4l2_queryctrl *a); ++ ++int isp_querymenu(struct v4l2_querymenu *a); ++ ++int isp_g_ctrl(struct v4l2_control *a); ++ ++int isp_s_ctrl(struct v4l2_control *a); ++ ++int isp_enum_fmt_cap(struct v4l2_fmtdesc *f); ++ ++int isp_try_fmt_cap(struct v4l2_pix_format *pix_input, ++ struct v4l2_pix_format *pix_output); ++ ++void isp_g_fmt_cap(struct v4l2_pix_format *pix); ++ ++int isp_s_fmt_cap(struct v4l2_pix_format *pix_input, ++ struct v4l2_pix_format *pix_output); ++ ++int isp_g_crop(struct v4l2_crop *a); ++ ++int isp_s_crop(struct v4l2_crop *a, struct v4l2_pix_format *pix); ++ ++void isp_config_crop(struct v4l2_pix_format *pix); ++ ++int isp_try_fmt(struct v4l2_pix_format *pix_input, ++ struct v4l2_pix_format *pix_output); ++ ++int isp_handle_private(int cmd, void *arg); ++ ++void isp_save_context(struct isp_reg *); ++ ++void isp_restore_context(struct isp_reg *); ++ ++void isp_print_status(void); ++ ++int __init isp_ccdc_init(void); ++int __init isp_hist_init(void); ++int __init isph3a_aewb_init(void); ++int __init isp_preview_init(void); ++int __init isp_resizer_init(void); ++int __init isp_af_init(void); ++int __init isp_csi2_init(void); ++ ++void isp_ccdc_cleanup(void); ++void isp_hist_cleanup(void); ++void isph3a_aewb_cleanup(void); ++void isp_preview_cleanup(void); ++void isp_hist_cleanup(void); ++void isp_resizer_cleanup(void); ++void isp_af_exit(void); ++void isp_csi2_cleanup(void); ++ ++#endif /* OMAP_ISP_TOP_H */ +diff --git a/drivers/media/video/isp/ispreg.h b/drivers/media/video/isp/ispreg.h +new file mode 100644 +index 0000000..4f8e1ef +--- /dev/null ++++ b/drivers/media/video/isp/ispreg.h +@@ -0,0 +1,1674 @@ ++/* ++ * ispreg.h ++ * ++ * Header file for all the ISP module in TI's OMAP3 Camera ISP. ++ * It has the OMAP HW register definitions. ++ * ++ * Copyright (C) 2009 Texas Instruments. ++ * Copyright (C) 2009 Nokia. ++ * ++ * Contributors: ++ * Tuukka Toivonen ++ * Thara Gopinath ++ * Sergio Aguirre ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#ifndef __ISPREG_H__ ++#define __ISPREG_H__ ++ ++#include ++ ++/* Note: Uncomment below defines as needed for enabling module specific debug ++ * messages ++ */ ++ ++/* ++ #define OMAP_ISPCTRL_DEBUG ++ #define OMAP_ISPCCDC_DEBUG ++ #define OMAP_ISPPREV_DEBUG ++ #define OMAP_ISPRESZ_DEBUG ++ #define OMAP_ISPMMU_DEBUG ++ #define OMAP_ISPH3A_DEBUG ++ #define OMAP_ISP_AF_DEBUG ++ #define OMAP_ISPHIST_DEBUG ++*/ ++ ++#ifdef OMAP_ISPCTRL_DEBUG ++#define DPRINTK_ISPCTRL(format, ...) \ ++ printk(KERN_INFO "ISPCTRL: " format, ## __VA_ARGS__) ++#define is_ispctrl_debug_enabled() 1 ++#else ++#define DPRINTK_ISPCTRL(format, ...) ++#define is_ispctrl_debug_enabled() 0 ++#endif ++ ++#ifdef OMAP_ISPCCDC_DEBUG ++#define DPRINTK_ISPCCDC(format, ...) \ ++ printk(KERN_INFO "ISPCCDC: " format, ## __VA_ARGS__) ++#define is_ispccdc_debug_enabled() 1 ++#else ++#define DPRINTK_ISPCCDC(format, ...) ++#define is_ispccdc_debug_enabled() 0 ++#endif ++ ++#ifdef OMAP_ISPPREV_DEBUG ++#define DPRINTK_ISPPREV(format, ...) \ ++ printk(KERN_INFO "ISPPREV: " format, ## __VA_ARGS__) ++#define is_ispprev_debug_enabled() 1 ++#else ++#define DPRINTK_ISPPREV(format, ...) ++#define is_ispprev_debug_enabled() 0 ++#endif ++ ++#ifdef OMAP_ISPRESZ_DEBUG ++#define DPRINTK_ISPRESZ(format, ...) \ ++ printk(KERN_INFO "ISPRESZ: " format, ## __VA_ARGS__) ++#define is_ispresz_debug_enabled() 1 ++#else ++#define DPRINTK_ISPRESZ(format, ...) ++#define is_ispresz_debug_enabled() 0 ++#endif ++ ++#ifdef OMAP_ISPMMU_DEBUG ++#define DPRINTK_ISPMMU(format, ...) \ ++ printk(KERN_INFO "ISPMMU: " format, ## __VA_ARGS__) ++#define is_ispmmu_debug_enabled() 1 ++#else ++#define DPRINTK_ISPMMU(format, ...) ++#define is_ispmmu_debug_enabled() 0 ++#endif ++ ++#ifdef OMAP_ISPH3A_DEBUG ++#define DPRINTK_ISPH3A(format, ...) \ ++ printk(KERN_INFO "ISPH3A: " format, ## __VA_ARGS__) ++#define is_isph3a_debug_enabled() 1 ++#else ++#define DPRINTK_ISPH3A(format, ...) ++#define is_isph3a_debug_enabled() 0 ++#endif ++ ++#ifdef OMAP_ISP_AF_DEBUG ++#define DPRINTK_ISP_AF(format, ...) \ ++ printk(KERN_INFO "ISP_AF: " format, ## __VA_ARGS__) ++#define is_isp_af_debug_enabled() 1 ++#else ++#define DPRINTK_ISP_AF(format, ...) ++#define is_isp_af_debug_enabled() 0 ++#endif ++ ++#ifdef OMAP_ISPHIST_DEBUG ++#define DPRINTK_ISPHIST(format, ...) \ ++ printk(KERN_INFO "ISPHIST: " format, ## __VA_ARGS__) ++#define is_isphist_debug_enabled() 1 ++#else ++#define DPRINTK_ISPHIST(format, ...) ++#define is_isphist_debug_enabled() 0 ++#endif ++ ++#define ISP_32B_BOUNDARY_BUF 0xFFFFFFE0 ++#define ISP_32B_BOUNDARY_OFFSET 0x0000FFE0 ++ ++#define CM_CAM_MCLK_HZ 216000000 ++ ++/* ISP Submodules offset */ ++ ++#define OMAP3ISP_REG_BASE OMAP3430_ISP_BASE ++#define OMAP3ISP_REG(offset) (OMAP3ISP_REG_BASE + (offset)) ++ ++#define OMAP3ISP_CBUFF_REG_OFFSET 0x0100 ++#define OMAP3ISP_CBUFF_REG_BASE (OMAP3ISP_REG_BASE + \ ++ OMAP3ISP_CBUFF_REG_OFFSET) ++#define OMAP3ISP_CBUFF_REG(offset) (OMAP3ISP_CBUFF_REG_BASE + (offset)) ++ ++#define OMAP3ISP_CCP2_REG_OFFSET 0x0400 ++#define OMAP3ISP_CCP2_REG_BASE (OMAP3ISP_REG_BASE + \ ++ OMAP3ISP_CCP2_REG_OFFSET) ++#define OMAP3ISP_CCP2_REG(offset) (OMAP3ISP_CCP2_REG_BASE + (offset)) ++ ++#define OMAP3ISP_CCDC_REG_OFFSET 0x0600 ++#define OMAP3ISP_CCDC_REG_BASE (OMAP3ISP_REG_BASE + \ ++ OMAP3ISP_CCDC_REG_OFFSET) ++#define OMAP3ISP_CCDC_REG(offset) (OMAP3ISP_CCDC_REG_BASE + (offset)) ++ ++#define OMAP3ISP_HIST_REG_OFFSET 0x0A00 ++#define OMAP3ISP_HIST_REG_BASE (OMAP3ISP_REG_BASE + \ ++ OMAP3ISP_HIST_REG_OFFSET) ++#define OMAP3ISP_HIST_REG(offset) (OMAP3ISP_HIST_REG_BASE + (offset)) ++ ++#define OMAP3ISP_H3A_REG_OFFSET 0x0C00 ++#define OMAP3ISP_H3A_REG_BASE (OMAP3ISP_REG_BASE + \ ++ OMAP3ISP_H3A_REG_OFFSET) ++#define OMAP3ISP_H3A_REG(offset) (OMAP3ISP_H3A_REG_BASE + (offset)) ++ ++#define OMAP3ISP_PREV_REG_OFFSET 0x0E00 ++#define OMAP3ISP_PREV_REG_BASE (OMAP3ISP_REG_BASE + \ ++ OMAP3ISP_PREV_REG_OFFSET) ++#define OMAP3ISP_PREV_REG(offset) (OMAP3ISP_PREV_REG_BASE + (offset)) ++ ++#define OMAP3ISP_RESZ_REG_OFFSET 0x1000 ++#define OMAP3ISP_RESZ_REG_BASE (OMAP3ISP_REG_BASE + \ ++ OMAP3ISP_RESZ_REG_OFFSET) ++#define OMAP3ISP_RESZ_REG(offset) (OMAP3ISP_RESZ_REG_BASE + (offset)) ++ ++#define OMAP3ISP_SBL_REG_OFFSET 0x1200 ++#define OMAP3ISP_SBL_REG_BASE (OMAP3ISP_REG_BASE + \ ++ OMAP3ISP_SBL_REG_OFFSET) ++#define OMAP3ISP_SBL_REG(offset) (OMAP3ISP_SBL_REG_BASE + (offset)) ++ ++#define OMAP3ISP_MMU_REG_OFFSET 0x1400 ++#define OMAP3ISP_MMU_REG_BASE (OMAP3ISP_REG_BASE + \ ++ OMAP3ISP_MMU_REG_OFFSET) ++#define OMAP3ISP_MMU_REG(offset) (OMAP3ISP_MMU_REG_BASE + (offset)) ++ ++#define OMAP3ISP_CSI2A_REG_OFFSET 0x1800 ++#define OMAP3ISP_CSI2A_REG_BASE (OMAP3ISP_REG_BASE + \ ++ OMAP3ISP_CSI2A_REG_OFFSET) ++#define OMAP3ISP_CSI2A_REG(offset) (OMAP3ISP_CSI2A_REG_BASE + (offset)) ++ ++#define OMAP3ISP_CSI2PHY_REG_OFFSET 0x1970 ++#define OMAP3ISP_CSI2PHY_REG_BASE (OMAP3ISP_REG_BASE + \ ++ OMAP3ISP_CSI2PHY_REG_OFFSET) ++#define OMAP3ISP_CSI2PHY_REG(offset) (OMAP3ISP_CSI2PHY_REG_BASE + (offset)) ++ ++/* ISP module register offset */ ++ ++#define ISP_REVISION (0x000) ++#define ISP_SYSCONFIG (0x004) ++#define ISP_SYSSTATUS (0x008) ++#define ISP_IRQ0ENABLE (0x00C) ++#define ISP_IRQ0STATUS (0x010) ++#define ISP_IRQ1ENABLE (0x014) ++#define ISP_IRQ1STATUS (0x018) ++#define ISP_TCTRL_GRESET_LENGTH (0x030) ++#define ISP_TCTRL_PSTRB_REPLAY (0x034) ++#define ISP_CTRL (0x040) ++#define ISP_SECURE (0x044) ++#define ISP_TCTRL_CTRL (0x050) ++#define ISP_TCTRL_FRAME (0x054) ++#define ISP_TCTRL_PSTRB_DELAY (0x058) ++#define ISP_TCTRL_STRB_DELAY (0x05C) ++#define ISP_TCTRL_SHUT_DELAY (0x060) ++#define ISP_TCTRL_PSTRB_LENGTH (0x064) ++#define ISP_TCTRL_STRB_LENGTH (0x068) ++#define ISP_TCTRL_SHUT_LENGTH (0x06C) ++#define ISP_PING_PONG_ADDR (0x070) ++#define ISP_PING_PONG_MEM_RANGE (0x074) ++#define ISP_PING_PONG_BUF_SIZE (0x078) ++ ++/* CSI1 receiver registers (ES2.0) */ ++#define ISPCSI1_REVISION (0x000) ++#define ISPCSI1_SYSCONFIG (0x004) ++#define ISPCSI1_SYSSTATUS (0x008) ++#define ISPCSI1_LC01_IRQENABLE (0x00C) ++#define ISPCSI1_LC01_IRQSTATUS (0x010) ++#define ISPCSI1_LC23_IRQENABLE (0x014) ++#define ISPCSI1_LC23_IRQSTATUS (0x018) ++#define ISPCSI1_LCM_IRQENABLE (0x02C) ++#define ISPCSI1_LCM_IRQSTATUS (0x030) ++#define ISPCSI1_CTRL (0x040) ++#define ISPCSI1_DBG (0x044) ++#define ISPCSI1_GNQ (0x048) ++#define ISPCSI1_LCx_CTRL(x) ((0x050)+0x30*(x)) ++#define ISPCSI1_LCx_CODE(x) ((0x054)+0x30*(x)) ++#define ISPCSI1_LCx_STAT_START(x) ((0x058)+0x30*(x)) ++#define ISPCSI1_LCx_STAT_SIZE(x) ((0x05C)+0x30*(x)) ++#define ISPCSI1_LCx_SOF_ADDR(x) ((0x060)+0x30*(x)) ++#define ISPCSI1_LCx_EOF_ADDR(x) ((0x064)+0x30*(x)) ++#define ISPCSI1_LCx_DAT_START(x) ((0x068)+0x30*(x)) ++#define ISPCSI1_LCx_DAT_SIZE(x) ((0x06C)+0x30*(x)) ++#define ISPCSI1_LCx_DAT_PING_ADDR(x) ((0x070)+0x30*(x)) ++#define ISPCSI1_LCx_DAT_PONG_ADDR(x) ((0x074)+0x30*(x)) ++#define ISPCSI1_LCx_DAT_OFST(x) ((0x078)+0x30*(x)) ++#define ISPCSI1_LCM_CTRL (0x1D0) ++#define ISPCSI1_LCM_VSIZE (0x1D4) ++#define ISPCSI1_LCM_HSIZE (0x1D8) ++#define ISPCSI1_LCM_PREFETCH (0x1DC) ++#define ISPCSI1_LCM_SRC_ADDR (0x1E0) ++#define ISPCSI1_LCM_SRC_OFST (0x1E4) ++#define ISPCSI1_LCM_DST_ADDR (0x1E8) ++#define ISPCSI1_LCM_DST_OFST (0x1EC) ++#define ISP_CSIB_SYSCONFIG ISPCSI1_SYSCONFIG ++#define ISP_CSIA_SYSCONFIG ISPCSI2_SYSCONFIG ++ ++/* ISP_CBUFF Registers */ ++ ++#define ISP_CBUFF_SYSCONFIG (0x010) ++#define ISP_CBUFF_IRQENABLE (0x01C) ++ ++#define ISP_CBUFF0_CTRL (0x020) ++#define ISP_CBUFF1_CTRL (0x024) ++ ++#define ISP_CBUFF0_START (0x040) ++#define ISP_CBUFF1_START (0x044) ++ ++#define ISP_CBUFF0_END (0x050) ++#define ISP_CBUFF1_END (0x054) ++ ++#define ISP_CBUFF0_WINDOWSIZE (0x060) ++#define ISP_CBUFF1_WINDOWSIZE (0x064) ++ ++#define ISP_CBUFF0_THRESHOLD (0x070) ++#define ISP_CBUFF1_THRESHOLD (0x074) ++ ++/* CCDC module register offset */ ++ ++#define ISPCCDC_PID (0x000) ++#define ISPCCDC_PCR (0x004) ++#define ISPCCDC_SYN_MODE (0x008) ++#define ISPCCDC_HD_VD_WID (0x00C) ++#define ISPCCDC_PIX_LINES (0x010) ++#define ISPCCDC_HORZ_INFO (0x014) ++#define ISPCCDC_VERT_START (0x018) ++#define ISPCCDC_VERT_LINES (0x01C) ++#define ISPCCDC_CULLING (0x020) ++#define ISPCCDC_HSIZE_OFF (0x024) ++#define ISPCCDC_SDOFST (0x028) ++#define ISPCCDC_SDR_ADDR (0x02C) ++#define ISPCCDC_CLAMP (0x030) ++#define ISPCCDC_DCSUB (0x034) ++#define ISPCCDC_COLPTN (0x038) ++#define ISPCCDC_BLKCMP (0x03C) ++#define ISPCCDC_FPC (0x040) ++#define ISPCCDC_FPC_ADDR (0x044) ++#define ISPCCDC_VDINT (0x048) ++#define ISPCCDC_ALAW (0x04C) ++#define ISPCCDC_REC656IF (0x050) ++#define ISPCCDC_CFG (0x054) ++#define ISPCCDC_FMTCFG (0x058) ++#define ISPCCDC_FMT_HORZ (0x05C) ++#define ISPCCDC_FMT_VERT (0x060) ++#define ISPCCDC_FMT_ADDR0 (0x064) ++#define ISPCCDC_FMT_ADDR1 (0x068) ++#define ISPCCDC_FMT_ADDR2 (0x06C) ++#define ISPCCDC_FMT_ADDR3 (0x070) ++#define ISPCCDC_FMT_ADDR4 (0x074) ++#define ISPCCDC_FMT_ADDR5 (0x078) ++#define ISPCCDC_FMT_ADDR6 (0x07C) ++#define ISPCCDC_FMT_ADDR7 (0x080) ++#define ISPCCDC_PRGEVEN0 (0x084) ++#define ISPCCDC_PRGEVEN1 (0x088) ++#define ISPCCDC_PRGODD0 (0x08C) ++#define ISPCCDC_PRGODD1 (0x090) ++#define ISPCCDC_VP_OUT (0x094) ++ ++#define ISPCCDC_LSC_CONFIG (0x098) ++#define ISPCCDC_LSC_INITIAL (0x09C) ++#define ISPCCDC_LSC_TABLE_BASE (0x0A0) ++#define ISPCCDC_LSC_TABLE_OFFSET (0x0A4) ++ ++/* SBL */ ++#define ISPSBL_CCDC_WR_0 (0x028) ++#define ISPSBL_CCDC_WR_0_DATA_READY (1 << 21) ++#define ISPSBL_CCDC_WR_1 (0x02C) ++#define ISPSBL_CCDC_WR_2 (0x030) ++#define ISPSBL_CCDC_WR_3 (0x034) ++ ++/* Histogram registers */ ++#define ISPHIST_PID (0x000) ++#define ISPHIST_PCR (0x004) ++#define ISPHIST_CNT (0x008) ++#define ISPHIST_WB_GAIN (0x00C) ++#define ISPHIST_R0_HORZ (0x010) ++#define ISPHIST_R0_VERT (0x014) ++#define ISPHIST_R1_HORZ (0x018) ++#define ISPHIST_R1_VERT (0x01C) ++#define ISPHIST_R2_HORZ (0x020) ++#define ISPHIST_R2_VERT (0x024) ++#define ISPHIST_R3_HORZ (0x028) ++#define ISPHIST_R3_VERT (0x02C) ++#define ISPHIST_ADDR (0x030) ++#define ISPHIST_DATA (0x034) ++#define ISPHIST_RADD (0x038) ++#define ISPHIST_RADD_OFF (0x03C) ++#define ISPHIST_H_V_INFO (0x040) ++ ++/* H3A module registers */ ++#define ISPH3A_PID (0x000) ++#define ISPH3A_PCR (0x004) ++#define ISPH3A_AEWWIN1 (0x04C) ++#define ISPH3A_AEWINSTART (0x050) ++#define ISPH3A_AEWINBLK (0x054) ++#define ISPH3A_AEWSUBWIN (0x058) ++#define ISPH3A_AEWBUFST (0x05C) ++#define ISPH3A_AFPAX1 (0x008) ++#define ISPH3A_AFPAX2 (0x00C) ++#define ISPH3A_AFPAXSTART (0x010) ++#define ISPH3A_AFIIRSH (0x014) ++#define ISPH3A_AFBUFST (0x018) ++#define ISPH3A_AFCOEF010 (0x01C) ++#define ISPH3A_AFCOEF032 (0x020) ++#define ISPH3A_AFCOEF054 (0x024) ++#define ISPH3A_AFCOEF076 (0x028) ++#define ISPH3A_AFCOEF098 (0x02C) ++#define ISPH3A_AFCOEF0010 (0x030) ++#define ISPH3A_AFCOEF110 (0x034) ++#define ISPH3A_AFCOEF132 (0x038) ++#define ISPH3A_AFCOEF154 (0x03C) ++#define ISPH3A_AFCOEF176 (0x040) ++#define ISPH3A_AFCOEF198 (0x044) ++#define ISPH3A_AFCOEF1010 (0x048) ++ ++#define ISPPRV_PCR (0x004) ++#define ISPPRV_HORZ_INFO (0x008) ++#define ISPPRV_VERT_INFO (0x00C) ++#define ISPPRV_RSDR_ADDR (0x010) ++#define ISPPRV_RADR_OFFSET (0x014) ++#define ISPPRV_DSDR_ADDR (0x018) ++#define ISPPRV_DRKF_OFFSET (0x01C) ++#define ISPPRV_WSDR_ADDR (0x020) ++#define ISPPRV_WADD_OFFSET (0x024) ++#define ISPPRV_AVE (0x028) ++#define ISPPRV_HMED (0x02C) ++#define ISPPRV_NF (0x030) ++#define ISPPRV_WB_DGAIN (0x034) ++#define ISPPRV_WBGAIN (0x038) ++#define ISPPRV_WBSEL (0x03C) ++#define ISPPRV_CFA (0x040) ++#define ISPPRV_BLKADJOFF (0x044) ++#define ISPPRV_RGB_MAT1 (0x048) ++#define ISPPRV_RGB_MAT2 (0x04C) ++#define ISPPRV_RGB_MAT3 (0x050) ++#define ISPPRV_RGB_MAT4 (0x054) ++#define ISPPRV_RGB_MAT5 (0x058) ++#define ISPPRV_RGB_OFF1 (0x05C) ++#define ISPPRV_RGB_OFF2 (0x060) ++#define ISPPRV_CSC0 (0x064) ++#define ISPPRV_CSC1 (0x068) ++#define ISPPRV_CSC2 (0x06C) ++#define ISPPRV_CSC_OFFSET (0x070) ++#define ISPPRV_CNT_BRT (0x074) ++#define ISPPRV_CSUP (0x078) ++#define ISPPRV_SETUP_YC (0x07C) ++#define ISPPRV_SET_TBL_ADDR (0x080) ++#define ISPPRV_SET_TBL_DATA (0x084) ++#define ISPPRV_CDC_THR0 (0x090) ++#define ISPPRV_CDC_THR1 (ISPPRV_CDC_THR0 + (0x4)) ++#define ISPPRV_CDC_THR2 (ISPPRV_CDC_THR0 + (0x4) * 2) ++#define ISPPRV_CDC_THR3 (ISPPRV_CDC_THR0 + (0x4) * 3) ++ ++#define ISPPRV_REDGAMMA_TABLE_ADDR 0x0000 ++#define ISPPRV_GREENGAMMA_TABLE_ADDR 0x0400 ++#define ISPPRV_BLUEGAMMA_TABLE_ADDR 0x0800 ++#define ISPPRV_NF_TABLE_ADDR 0x0C00 ++#define ISPPRV_YENH_TABLE_ADDR 0x1000 ++#define ISPPRV_CFA_TABLE_ADDR 0x1400 ++ ++#define ISPPRV_MAXOUTPUT_WIDTH 1280 ++#define ISPPRV_MAXOUTPUT_WIDTH_ES2 3300 ++#define ISPRSZ_MIN_OUTPUT 64 ++#define ISPRSZ_MAX_OUTPUT 3312 ++ ++/* Resizer module register offset */ ++#define ISPRSZ_PID (0x000) ++#define ISPRSZ_PCR (0x004) ++#define ISPRSZ_CNT (0x008) ++#define ISPRSZ_OUT_SIZE (0x00C) ++#define ISPRSZ_IN_START (0x010) ++#define ISPRSZ_IN_SIZE (0x014) ++#define ISPRSZ_SDR_INADD (0x018) ++#define ISPRSZ_SDR_INOFF (0x01C) ++#define ISPRSZ_SDR_OUTADD (0x020) ++#define ISPRSZ_SDR_OUTOFF (0x024) ++#define ISPRSZ_HFILT10 (0x028) ++#define ISPRSZ_HFILT32 (0x02C) ++#define ISPRSZ_HFILT54 (0x030) ++#define ISPRSZ_HFILT76 (0x034) ++#define ISPRSZ_HFILT98 (0x038) ++#define ISPRSZ_HFILT1110 (0x03C) ++#define ISPRSZ_HFILT1312 (0x040) ++#define ISPRSZ_HFILT1514 (0x044) ++#define ISPRSZ_HFILT1716 (0x048) ++#define ISPRSZ_HFILT1918 (0x04C) ++#define ISPRSZ_HFILT2120 (0x050) ++#define ISPRSZ_HFILT2322 (0x054) ++#define ISPRSZ_HFILT2524 (0x058) ++#define ISPRSZ_HFILT2726 (0x05C) ++#define ISPRSZ_HFILT2928 (0x060) ++#define ISPRSZ_HFILT3130 (0x064) ++#define ISPRSZ_VFILT10 (0x068) ++#define ISPRSZ_VFILT32 (0x06C) ++#define ISPRSZ_VFILT54 (0x070) ++#define ISPRSZ_VFILT76 (0x074) ++#define ISPRSZ_VFILT98 (0x078) ++#define ISPRSZ_VFILT1110 (0x07C) ++#define ISPRSZ_VFILT1312 (0x080) ++#define ISPRSZ_VFILT1514 (0x084) ++#define ISPRSZ_VFILT1716 (0x088) ++#define ISPRSZ_VFILT1918 (0x08C) ++#define ISPRSZ_VFILT2120 (0x090) ++#define ISPRSZ_VFILT2322 (0x094) ++#define ISPRSZ_VFILT2524 (0x098) ++#define ISPRSZ_VFILT2726 (0x09C) ++#define ISPRSZ_VFILT2928 (0x0A0) ++#define ISPRSZ_VFILT3130 (0x0A4) ++#define ISPRSZ_YENH (0x0A8) ++ ++/* MMU module registers */ ++#define ISPMMU_REVISION (0x000) ++#define ISPMMU_SYSCONFIG (0x010) ++#define ISPMMU_SYSSTATUS (0x014) ++#define ISPMMU_IRQSTATUS (0x018) ++#define ISPMMU_IRQENABLE (0x01C) ++#define ISPMMU_WALKING_ST (0x040) ++#define ISPMMU_CNTL (0x044) ++#define ISPMMU_FAULT_AD (0x048) ++#define ISPMMU_TTB (0x04C) ++#define ISPMMU_LOCK (0x050) ++#define ISPMMU_LD_TLB (0x054) ++#define ISPMMU_CAM (0x058) ++#define ISPMMU_RAM (0x05C) ++#define ISPMMU_GFLUSH (0x060) ++#define ISPMMU_FLUSH_ENTRY (0x064) ++#define ISPMMU_READ_CAM (0x068) ++#define ISPMMU_READ_RAM (0x06c) ++#define ISPMMU_EMU_FAULT_AD (0x070) ++ ++#define ISP_INT_CLR 0xFF113F11 ++#define ISPPRV_PCR_EN 1 ++#define ISPPRV_PCR_BUSY (1 << 1) ++#define ISPPRV_PCR_SOURCE (1 << 2) ++#define ISPPRV_PCR_ONESHOT (1 << 3) ++#define ISPPRV_PCR_WIDTH (1 << 4) ++#define ISPPRV_PCR_INVALAW (1 << 5) ++#define ISPPRV_PCR_DRKFEN (1 << 6) ++#define ISPPRV_PCR_DRKFCAP (1 << 7) ++#define ISPPRV_PCR_HMEDEN (1 << 8) ++#define ISPPRV_PCR_NFEN (1 << 9) ++#define ISPPRV_PCR_CFAEN (1 << 10) ++#define ISPPRV_PCR_CFAFMT_SHIFT 11 ++#define ISPPRV_PCR_CFAFMT_MASK 0x7800 ++#define ISPPRV_PCR_CFAFMT_BAYER (0 << 11) ++#define ISPPRV_PCR_CFAFMT_SONYVGA (1 << 11) ++#define ISPPRV_PCR_CFAFMT_RGBFOVEON (2 << 11) ++#define ISPPRV_PCR_CFAFMT_DNSPL (3 << 11) ++#define ISPPRV_PCR_CFAFMT_HONEYCOMB (4 << 11) ++#define ISPPRV_PCR_CFAFMT_RRGGBBFOVEON (5 << 11) ++#define ISPPRV_PCR_YNENHEN (1 << 15) ++#define ISPPRV_PCR_SUPEN (1 << 16) ++#define ISPPRV_PCR_YCPOS_SHIFT 17 ++#define ISPPRV_PCR_YCPOS_YCrYCb (0 << 17) ++#define ISPPRV_PCR_YCPOS_YCbYCr (1 << 17) ++#define ISPPRV_PCR_YCPOS_CbYCrY (2 << 17) ++#define ISPPRV_PCR_YCPOS_CrYCbY (3 << 17) ++#define ISPPRV_PCR_RSZPORT (1 << 19) ++#define ISPPRV_PCR_SDRPORT (1 << 20) ++#define ISPPRV_PCR_SCOMP_EN (1 << 21) ++#define ISPPRV_PCR_SCOMP_SFT_SHIFT (22) ++#define ISPPRV_PCR_SCOMP_SFT_MASK (~(7 << 22)) ++#define ISPPRV_PCR_GAMMA_BYPASS (1 << 26) ++#define ISPPRV_PCR_DCOREN (1 << 27) ++#define ISPPRV_PCR_DCCOUP (1 << 28) ++#define ISPPRV_PCR_DRK_FAIL (1 << 31) ++ ++#define ISPPRV_HORZ_INFO_EPH_SHIFT 0 ++#define ISPPRV_HORZ_INFO_EPH_MASK 0x3fff ++#define ISPPRV_HORZ_INFO_SPH_SHIFT 16 ++#define ISPPRV_HORZ_INFO_SPH_MASK 0x3fff0 ++ ++#define ISPPRV_VERT_INFO_ELV_SHIFT 0 ++#define ISPPRV_VERT_INFO_ELV_MASK 0x3fff ++#define ISPPRV_VERT_INFO_SLV_SHIFT 16 ++#define ISPPRV_VERT_INFO_SLV_MASK 0x3fff0 ++ ++#define ISPPRV_AVE_EVENDIST_SHIFT 2 ++#define ISPPRV_AVE_EVENDIST_1 0x0 ++#define ISPPRV_AVE_EVENDIST_2 0x1 ++#define ISPPRV_AVE_EVENDIST_3 0x2 ++#define ISPPRV_AVE_EVENDIST_4 0x3 ++#define ISPPRV_AVE_ODDDIST_SHIFT 4 ++#define ISPPRV_AVE_ODDDIST_1 0x0 ++#define ISPPRV_AVE_ODDDIST_2 0x1 ++#define ISPPRV_AVE_ODDDIST_3 0x2 ++#define ISPPRV_AVE_ODDDIST_4 0x3 ++ ++#define ISPPRV_HMED_THRESHOLD_SHIFT 0 ++#define ISPPRV_HMED_EVENDIST (1 << 8) ++#define ISPPRV_HMED_ODDDIST (1 << 9) ++ ++#define ISPPRV_WBGAIN_COEF0_SHIFT 0 ++#define ISPPRV_WBGAIN_COEF1_SHIFT 8 ++#define ISPPRV_WBGAIN_COEF2_SHIFT 16 ++#define ISPPRV_WBGAIN_COEF3_SHIFT 24 ++ ++#define ISPPRV_WBSEL_COEF0 0x0 ++#define ISPPRV_WBSEL_COEF1 0x1 ++#define ISPPRV_WBSEL_COEF2 0x2 ++#define ISPPRV_WBSEL_COEF3 0x3 ++ ++#define ISPPRV_WBSEL_N0_0_SHIFT 0 ++#define ISPPRV_WBSEL_N0_1_SHIFT 2 ++#define ISPPRV_WBSEL_N0_2_SHIFT 4 ++#define ISPPRV_WBSEL_N0_3_SHIFT 6 ++#define ISPPRV_WBSEL_N1_0_SHIFT 8 ++#define ISPPRV_WBSEL_N1_1_SHIFT 10 ++#define ISPPRV_WBSEL_N1_2_SHIFT 12 ++#define ISPPRV_WBSEL_N1_3_SHIFT 14 ++#define ISPPRV_WBSEL_N2_0_SHIFT 16 ++#define ISPPRV_WBSEL_N2_1_SHIFT 18 ++#define ISPPRV_WBSEL_N2_2_SHIFT 20 ++#define ISPPRV_WBSEL_N2_3_SHIFT 22 ++#define ISPPRV_WBSEL_N3_0_SHIFT 24 ++#define ISPPRV_WBSEL_N3_1_SHIFT 26 ++#define ISPPRV_WBSEL_N3_2_SHIFT 28 ++#define ISPPRV_WBSEL_N3_3_SHIFT 30 ++ ++#define ISPPRV_CFA_GRADTH_HOR_SHIFT 0 ++#define ISPPRV_CFA_GRADTH_VER_SHIFT 8 ++ ++#define ISPPRV_BLKADJOFF_B_SHIFT 0 ++#define ISPPRV_BLKADJOFF_G_SHIFT 8 ++#define ISPPRV_BLKADJOFF_R_SHIFT 16 ++ ++#define ISPPRV_RGB_MAT1_MTX_RR_SHIFT 0 ++#define ISPPRV_RGB_MAT1_MTX_GR_SHIFT 16 ++ ++#define ISPPRV_RGB_MAT2_MTX_BR_SHIFT 0 ++#define ISPPRV_RGB_MAT2_MTX_RG_SHIFT 16 ++ ++#define ISPPRV_RGB_MAT3_MTX_GG_SHIFT 0 ++#define ISPPRV_RGB_MAT3_MTX_BG_SHIFT 16 ++ ++#define ISPPRV_RGB_MAT4_MTX_RB_SHIFT 0 ++#define ISPPRV_RGB_MAT4_MTX_GB_SHIFT 16 ++ ++#define ISPPRV_RGB_MAT5_MTX_BB_SHIFT 0 ++ ++#define ISPPRV_RGB_OFF1_MTX_OFFG_SHIFT 0 ++#define ISPPRV_RGB_OFF1_MTX_OFFR_SHIFT 16 ++ ++#define ISPPRV_RGB_OFF2_MTX_OFFB_SHIFT 0 ++ ++#define ISPPRV_CSC0_RY_SHIFT 0 ++#define ISPPRV_CSC0_GY_SHIFT 10 ++#define ISPPRV_CSC0_BY_SHIFT 20 ++ ++#define ISPPRV_CSC1_RCB_SHIFT 0 ++#define ISPPRV_CSC1_GCB_SHIFT 10 ++#define ISPPRV_CSC1_BCB_SHIFT 20 ++ ++#define ISPPRV_CSC2_RCR_SHIFT 0 ++#define ISPPRV_CSC2_GCR_SHIFT 10 ++#define ISPPRV_CSC2_BCR_SHIFT 20 ++ ++#define ISPPRV_CSC_OFFSET_CR_SHIFT 0 ++#define ISPPRV_CSC_OFFSET_CB_SHIFT 8 ++#define ISPPRV_CSC_OFFSET_Y_SHIFT 16 ++ ++#define ISPPRV_CNT_BRT_BRT_SHIFT 0 ++#define ISPPRV_CNT_BRT_CNT_SHIFT 8 ++ ++#define ISPPRV_CONTRAST_MAX 0x10 ++#define ISPPRV_CONTRAST_MIN 0xFF ++#define ISPPRV_BRIGHT_MIN 0x00 ++#define ISPPRV_BRIGHT_MAX 0xFF ++ ++#define ISPPRV_CSUP_CSUPG_SHIFT 0 ++#define ISPPRV_CSUP_THRES_SHIFT 8 ++#define ISPPRV_CSUP_HPYF_SHIFT 16 ++ ++#define ISPPRV_SETUP_YC_MINC_SHIFT 0 ++#define ISPPRV_SETUP_YC_MAXC_SHIFT 8 ++#define ISPPRV_SETUP_YC_MINY_SHIFT 16 ++#define ISPPRV_SETUP_YC_MAXY_SHIFT 24 ++#define ISPPRV_YC_MAX 0xFF ++#define ISPPRV_YC_MIN 0x0 ++ ++/* Define bit fields within selected registers */ ++#define ISP_REVISION_SHIFT 0 ++ ++#define ISP_SYSCONFIG_AUTOIDLE 0 ++#define ISP_SYSCONFIG_SOFTRESET (1 << 1) ++#define ISP_SYSCONFIG_MIDLEMODE_SHIFT 12 ++#define ISP_SYSCONFIG_MIDLEMODE_FORCESTANDBY 0x0 ++#define ISP_SYSCONFIG_MIDLEMODE_NOSTANBY 0x1 ++#define ISP_SYSCONFIG_MIDLEMODE_SMARTSTANDBY 0x2 ++ ++#define ISP_SYSSTATUS_RESETDONE 0 ++ ++#define IRQ0ENABLE_CSIA_IRQ 1 ++#define IRQ0ENABLE_CSIA_LC1_IRQ (1 << 1) ++#define IRQ0ENABLE_CSIA_LC2_IRQ (1 << 2) ++#define IRQ0ENABLE_CSIA_LC3_IRQ (1 << 3) ++#define IRQ0ENABLE_CSIB_IRQ (1 << 4) ++#define IRQ0ENABLE_CSIB_LC1_IRQ (1 << 5) ++#define IRQ0ENABLE_CSIB_LC2_IRQ (1 << 6) ++#define IRQ0ENABLE_CSIB_LC3_IRQ (1 << 7) ++#define IRQ0ENABLE_CCDC_VD0_IRQ (1 << 8) ++#define IRQ0ENABLE_CCDC_VD1_IRQ (1 << 9) ++#define IRQ0ENABLE_CCDC_VD2_IRQ (1 << 10) ++#define IRQ0ENABLE_CCDC_ERR_IRQ (1 << 11) ++#define IRQ0ENABLE_H3A_AF_DONE_IRQ (1 << 12) ++#define IRQ0ENABLE_H3A_AWB_DONE_IRQ (1 << 13) ++#define IRQ0ENABLE_HIST_DONE_IRQ (1 << 16) ++#define IRQ0ENABLE_CCDC_LSC_DONE_IRQ (1 << 17) ++#define IRQ0ENABLE_CCDC_LSC_PREF_COMP_IRQ (1 << 18) ++#define IRQ0ENABLE_CCDC_LSC_PREF_ERR_IRQ (1 << 19) ++#define IRQ0ENABLE_PRV_DONE_IRQ (1 << 20) ++#define IRQ0ENABLE_RSZ_DONE_IRQ (1 << 24) ++#define IRQ0ENABLE_OVF_IRQ (1 << 25) ++#define IRQ0ENABLE_PING_IRQ (1 << 26) ++#define IRQ0ENABLE_PONG_IRQ (1 << 27) ++#define IRQ0ENABLE_MMU_ERR_IRQ (1 << 28) ++#define IRQ0ENABLE_OCP_ERR_IRQ (1 << 29) ++#define IRQ0ENABLE_SEC_ERR_IRQ (1 << 30) ++#define IRQ0ENABLE_HS_VS_IRQ (1 << 31) ++ ++#define IRQ0STATUS_CSIA_IRQ 1 ++#define IRQ0STATUS_CSIA_LC1_IRQ (1 << 1) ++#define IRQ0STATUS_CSIA_LC2_IRQ (1 << 2) ++#define IRQ0STATUS_CSIA_LC3_IRQ (1 << 3) ++#define IRQ0STATUS_CSIB_IRQ (1 << 4) ++#define IRQ0STATUS_CSIB_LC1_IRQ (1 << 5) ++#define IRQ0STATUS_CSIB_LC2_IRQ (1 << 6) ++#define IRQ0STATUS_CSIB_LC3_IRQ (1 << 7) ++#define IRQ0STATUS_CCDC_VD0_IRQ (1 << 8) ++#define IRQ0STATUS_CCDC_VD1_IRQ (1 << 9) ++#define IRQ0STATUS_CCDC_VD2_IRQ (1 << 10) ++#define IRQ0STATUS_CCDC_ERR_IRQ (1 << 11) ++#define IRQ0STATUS_H3A_AF_DONE_IRQ (1 << 12) ++#define IRQ0STATUS_H3A_AWB_DONE_IRQ (1 << 13) ++#define IRQ0STATUS_HIST_DONE_IRQ (1 << 16) ++#define IRQ0STATUS_PRV_DONE_IRQ (1 << 20) ++#define IRQ0STATUS_RSZ_DONE_IRQ (1 << 24) ++#define IRQ0STATUS_OVF_IRQ (1 << 25) ++#define IRQ0STATUS_PING_IRQ (1 << 26) ++#define IRQ0STATUS_PONG_IRQ (1 << 27) ++#define IRQ0STATUS_MMU_ERR_IRQ (1 << 28) ++#define IRQ0STATUS_OCP_ERR_IRQ (1 << 29) ++#define IRQ0STATUS_SEC_ERR_IRQ (1 << 30) ++#define IRQ0STATUS_HS_VS_IRQ (1 << 31) ++ ++#define TCTRL_GRESET_LEN 0 ++ ++#define TCTRL_PSTRB_REPLAY_DELAY 0 ++#define TCTRL_PSTRB_REPLAY_COUNTER_SHIFT 25 ++ ++#define ISPCTRL_PAR_SER_CLK_SEL_PARALLEL 0x0 ++#define ISPCTRL_PAR_SER_CLK_SEL_CSIA 0x1 ++#define ISPCTRL_PAR_SER_CLK_SEL_CSIB 0x2 ++#define ISPCTRL_PAR_SER_CLK_SEL_MASK 0xFFFFFFFC ++ ++#define ISPCTRL_PAR_BRIDGE_SHIFT 2 ++#define ISPCTRL_PAR_BRIDGE_DISABLE (0x0 << 2) ++#define ISPCTRL_PAR_BRIDGE_LENDIAN (0x2 << 2) ++#define ISPCTRL_PAR_BRIDGE_BENDIAN (0x3 << 2) ++ ++#define ISPCTRL_PAR_CLK_POL_SHIFT 4 ++#define ISPCTRL_PAR_CLK_POL_INV (1 << 4) ++#define ISPCTRL_PING_PONG_EN (1 << 5) ++#define ISPCTRL_SHIFT_SHIFT 6 ++#define ISPCTRL_SHIFT_0 (0x0 << 6) ++#define ISPCTRL_SHIFT_2 (0x1 << 6) ++#define ISPCTRL_SHIFT_4 (0x2 << 6) ++#define ISPCTRL_SHIFT_MASK (~(0x3 << 6)) ++ ++#define ISPCTRL_CCDC_CLK_EN (1 << 8) ++#define ISPCTRL_SCMP_CLK_EN (1 << 9) ++#define ISPCTRL_H3A_CLK_EN (1 << 10) ++#define ISPCTRL_HIST_CLK_EN (1 << 11) ++#define ISPCTRL_PREV_CLK_EN (1 << 12) ++#define ISPCTRL_RSZ_CLK_EN (1 << 13) ++#define ISPCTRL_SYNC_DETECT_SHIFT 14 ++#define ISPCTRL_SYNC_DETECT_HSFALL (0x0 << ISPCTRL_SYNC_DETECT_SHIFT) ++#define ISPCTRL_SYNC_DETECT_HSRISE (0x1 << ISPCTRL_SYNC_DETECT_SHIFT) ++#define ISPCTRL_SYNC_DETECT_VSFALL (0x2 << ISPCTRL_SYNC_DETECT_SHIFT) ++#define ISPCTRL_SYNC_DETECT_VSRISE (0x3 << ISPCTRL_SYNC_DETECT_SHIFT) ++#define ISPCTRL_SYNC_DETECT_MASK (0x3 << ISPCTRL_SYNC_DETECT_SHIFT) ++ ++#define ISPCTRL_CCDC_RAM_EN (1 << 16) ++#define ISPCTRL_PREV_RAM_EN (1 << 17) ++#define ISPCTRL_SBL_RD_RAM_EN (1 << 18) ++#define ISPCTRL_SBL_WR1_RAM_EN (1 << 19) ++#define ISPCTRL_SBL_WR0_RAM_EN (1 << 20) ++#define ISPCTRL_SBL_AUTOIDLE (1 << 21) ++#define ISPCTRL_SBL_SHARED_RPORTB (1 << 28) ++#define ISPCTRL_JPEG_FLUSH (1 << 30) ++#define ISPCTRL_CCDC_FLUSH (1 << 31) ++ ++#define ISPSECURE_SECUREMODE 0 ++ ++#define ISPTCTRL_CTRL_DIV_LOW 0x0 ++#define ISPTCTRL_CTRL_DIV_HIGH 0x1 ++#define ISPTCTRL_CTRL_DIV_BYPASS 0x1F ++ ++#define ISPTCTRL_CTRL_DIVA_SHIFT 0 ++#define ISPTCTRL_CTRL_DIVA_MASK (0x1F << ISPTCTRL_CTRL_DIVA_SHIFT) ++ ++#define ISPTCTRL_CTRL_DIVB_SHIFT 5 ++#define ISPTCTRL_CTRL_DIVB_MASK (0x1F << ISPTCTRL_CTRL_DIVB_SHIFT) ++ ++#define ISPTCTRL_CTRL_DIVC_SHIFT 10 ++#define ISPTCTRL_CTRL_DIVC_NOCLOCK (0x0 << 10) ++ ++#define ISPTCTRL_CTRL_SHUTEN (1 << 21) ++#define ISPTCTRL_CTRL_PSTRBEN (1 << 22) ++#define ISPTCTRL_CTRL_STRBEN (1 << 23) ++#define ISPTCTRL_CTRL_SHUTPOL (1 << 24) ++#define ISPTCTRL_CTRL_STRBPSTRBPOL (1 << 26) ++ ++#define ISPTCTRL_CTRL_INSEL_SHIFT 27 ++#define ISPTCTRL_CTRL_INSEL_PARALLEL (0x0 << 27) ++#define ISPTCTRL_CTRL_INSEL_CSIA (0x1 << 27) ++#define ISPTCTRL_CTRL_INSEL_CSIB (0x2 << 27) ++ ++#define ISPTCTRL_CTRL_GRESETEn (1 << 29) ++#define ISPTCTRL_CTRL_GRESETPOL (1 << 30) ++#define ISPTCTRL_CTRL_GRESETDIR (1 << 31) ++ ++#define ISPTCTRL_FRAME_SHUT_SHIFT 0 ++#define ISPTCTRL_FRAME_PSTRB_SHIFT 6 ++#define ISPTCTRL_FRAME_STRB_SHIFT 12 ++ ++#define ISPCCDC_PID_PREV_SHIFT 0 ++#define ISPCCDC_PID_CID_SHIFT 8 ++#define ISPCCDC_PID_TID_SHIFT 16 ++ ++#define ISPCCDC_PCR_EN 1 ++#define ISPCCDC_PCR_BUSY (1 << 1) ++ ++#define ISPCCDC_SYN_MODE_VDHDOUT 0x1 ++#define ISPCCDC_SYN_MODE_FLDOUT (1 << 1) ++#define ISPCCDC_SYN_MODE_VDPOL (1 << 2) ++#define ISPCCDC_SYN_MODE_HDPOL (1 << 3) ++#define ISPCCDC_SYN_MODE_FLDPOL (1 << 4) ++#define ISPCCDC_SYN_MODE_EXWEN (1 << 5) ++#define ISPCCDC_SYN_MODE_DATAPOL (1 << 6) ++#define ISPCCDC_SYN_MODE_FLDMODE (1 << 7) ++#define ISPCCDC_SYN_MODE_DATSIZ_MASK 0xFFFFF8FF ++#define ISPCCDC_SYN_MODE_DATSIZ_8_16 (0x0 << 8) ++#define ISPCCDC_SYN_MODE_DATSIZ_12 (0x4 << 8) ++#define ISPCCDC_SYN_MODE_DATSIZ_11 (0x5 << 8) ++#define ISPCCDC_SYN_MODE_DATSIZ_10 (0x6 << 8) ++#define ISPCCDC_SYN_MODE_DATSIZ_8 (0x7 << 8) ++#define ISPCCDC_SYN_MODE_PACK8 (1 << 11) ++#define ISPCCDC_SYN_MODE_INPMOD_MASK 0xFFFFCFFF ++#define ISPCCDC_SYN_MODE_INPMOD_RAW (0 << 12) ++#define ISPCCDC_SYN_MODE_INPMOD_YCBCR16 (1 << 12) ++#define ISPCCDC_SYN_MODE_INPMOD_YCBCR8 (2 << 12) ++#define ISPCCDC_SYN_MODE_LPF (1 << 14) ++#define ISPCCDC_SYN_MODE_FLDSTAT (1 << 15) ++#define ISPCCDC_SYN_MODE_VDHDEN (1 << 16) ++#define ISPCCDC_SYN_MODE_WEN (1 << 17) ++#define ISPCCDC_SYN_MODE_VP2SDR (1 << 18) ++#define ISPCCDC_SYN_MODE_SDR2RSZ (1 << 19) ++ ++#define ISPCCDC_HD_VD_WID_VDW_SHIFT 0 ++#define ISPCCDC_HD_VD_WID_HDW_SHIFT 16 ++ ++#define ISPCCDC_PIX_LINES_HLPRF_SHIFT 0 ++#define ISPCCDC_PIX_LINES_PPLN_SHIFT 16 ++ ++#define ISPCCDC_HORZ_INFO_NPH_SHIFT 0 ++#define ISPCCDC_HORZ_INFO_NPH_MASK 0xFFFF8000 ++#define ISPCCDC_HORZ_INFO_SPH_MASK 0x1000FFFF ++#define ISPCCDC_HORZ_INFO_SPH_SHIFT 16 ++ ++#define ISPCCDC_VERT_START_SLV0_SHIFT 16 ++#define ISPCCDC_VERT_START_SLV0_MASK 0x1000FFFF ++#define ISPCCDC_VERT_START_SLV1_SHIFT 0 ++ ++#define ISPCCDC_VERT_LINES_NLV_MASK 0xFFFF8000 ++#define ISPCCDC_VERT_LINES_NLV_SHIFT 0 ++ ++#define ISPCCDC_CULLING_CULV_SHIFT 0 ++#define ISPCCDC_CULLING_CULHODD_SHIFT 16 ++#define ISPCCDC_CULLING_CULHEVN_SHIFT 24 ++ ++#define ISPCCDC_HSIZE_OFF_SHIFT 0 ++ ++#define ISPCCDC_SDOFST_FINV (1 << 14) ++#define ISPCCDC_SDOFST_FOFST_1L 0 ++#define ISPCCDC_SDOFST_FOFST_4L (3 << 12) ++#define ISPCCDC_SDOFST_LOFST3_SHIFT 0 ++#define ISPCCDC_SDOFST_LOFST2_SHIFT 3 ++#define ISPCCDC_SDOFST_LOFST1_SHIFT 6 ++#define ISPCCDC_SDOFST_LOFST0_SHIFT 9 ++#define EVENEVEN 1 ++#define ODDEVEN 2 ++#define EVENODD 3 ++#define ODDODD 4 ++ ++#define ISPCCDC_CLAMP_OBGAIN_SHIFT 0 ++#define ISPCCDC_CLAMP_OBST_SHIFT 10 ++#define ISPCCDC_CLAMP_OBSLN_SHIFT 25 ++#define ISPCCDC_CLAMP_OBSLEN_SHIFT 28 ++#define ISPCCDC_CLAMP_CLAMPEN (1 << 31) ++ ++#define ISPCCDC_COLPTN_R_Ye 0x0 ++#define ISPCCDC_COLPTN_Gr_Cy 0x1 ++#define ISPCCDC_COLPTN_Gb_G 0x2 ++#define ISPCCDC_COLPTN_B_Mg 0x3 ++#define ISPCCDC_COLPTN_CP0PLC0_SHIFT 0 ++#define ISPCCDC_COLPTN_CP0PLC1_SHIFT 2 ++#define ISPCCDC_COLPTN_CP0PLC2_SHIFT 4 ++#define ISPCCDC_COLPTN_CP0PLC3_SHIFT 6 ++#define ISPCCDC_COLPTN_CP1PLC0_SHIFT 8 ++#define ISPCCDC_COLPTN_CP1PLC1_SHIFT 10 ++#define ISPCCDC_COLPTN_CP1PLC2_SHIFT 12 ++#define ISPCCDC_COLPTN_CP1PLC3_SHIFT 14 ++#define ISPCCDC_COLPTN_CP2PLC0_SHIFT 16 ++#define ISPCCDC_COLPTN_CP2PLC1_SHIFT 18 ++#define ISPCCDC_COLPTN_CP2PLC2_SHIFT 20 ++#define ISPCCDC_COLPTN_CP2PLC3_SHIFT 22 ++#define ISPCCDC_COLPTN_CP3PLC0_SHIFT 24 ++#define ISPCCDC_COLPTN_CP3PLC1_SHIFT 26 ++#define ISPCCDC_COLPTN_CP3PLC2_SHIFT 28 ++#define ISPCCDC_COLPTN_CP3PLC3_SHIFT 30 ++ ++#define ISPCCDC_BLKCMP_B_MG_SHIFT 0 ++#define ISPCCDC_BLKCMP_GB_G_SHIFT 8 ++#define ISPCCDC_BLKCMP_GR_CY_SHIFT 16 ++#define ISPCCDC_BLKCMP_R_YE_SHIFT 24 ++ ++#define ISPCCDC_FPC_FPNUM_SHIFT 0 ++#define ISPCCDC_FPC_FPCEN (1 << 15) ++#define ISPCCDC_FPC_FPERR (1 << 16) ++ ++#define ISPCCDC_VDINT_1_SHIFT 0 ++#define ISPCCDC_VDINT_0_SHIFT 16 ++#define ISPCCDC_VDINT_0_MASK 0x7FFF ++#define ISPCCDC_VDINT_1_MASK 0x7FFF ++ ++#define ISPCCDC_ALAW_GWDI_SHIFT 0 ++#define ISPCCDC_ALAW_CCDTBL (1 << 3) ++ ++#define ISPCCDC_REC656IF_R656ON 1 ++#define ISPCCDC_REC656IF_ECCFVH (1 << 1) ++ ++#define ISPCCDC_CFG_BW656 (1 << 5) ++#define ISPCCDC_CFG_FIDMD_SHIFT 6 ++#define ISPCCDC_CFG_WENLOG (1 << 8) ++#define ISPCCDC_CFG_WENLOG_AND (0 << 8) ++#define ISPCCDC_CFG_WENLOG_OR (1 << 8) ++#define ISPCCDC_CFG_Y8POS (1 << 11) ++#define ISPCCDC_CFG_BSWD (1 << 12) ++#define ISPCCDC_CFG_MSBINVI (1 << 13) ++#define ISPCCDC_CFG_VDLC (1 << 15) ++ ++#define ISPCCDC_FMTCFG_FMTEN 0x1 ++#define ISPCCDC_FMTCFG_LNALT (1 << 1) ++#define ISPCCDC_FMTCFG_LNUM_SHIFT 2 ++#define ISPCCDC_FMTCFG_PLEN_ODD_SHIFT 4 ++#define ISPCCDC_FMTCFG_PLEN_EVEN_SHIFT 8 ++#define ISPCCDC_FMTCFG_VPIN_MASK 0xFFFF8000 ++#define ISPCCDC_FMTCFG_VPIN_12_3 (0x3 << 12) ++#define ISPCCDC_FMTCFG_VPIN_11_2 (0x4 << 12) ++#define ISPCCDC_FMTCFG_VPIN_10_1 (0x5 << 12) ++#define ISPCCDC_FMTCFG_VPIN_9_0 (0x6 << 12) ++#define ISPCCDC_FMTCFG_VPEN (1 << 15) ++ ++#define ISPCCDC_FMTCF_VPIF_FRQ_MASK 0xFFF8FFFF ++#define ISPCCDC_FMTCF_VPIF_FRQ_BY2 (0x0 << 16) ++#define ISPCCDC_FMTCF_VPIF_FRQ_BY3 (0x1 << 16) ++#define ISPCCDC_FMTCF_VPIF_FRQ_BY4 (0x2 << 16) ++#define ISPCCDC_FMTCF_VPIF_FRQ_BY5 (0x3 << 16) ++#define ISPCCDC_FMTCF_VPIF_FRQ_BY6 (0x4 << 16) ++ ++#define ISPCCDC_FMT_HORZ_FMTLNH_SHIFT 0 ++#define ISPCCDC_FMT_HORZ_FMTSPH_SHIFT 16 ++ ++#define ISPCCDC_FMT_VERT_FMTLNV_SHIFT 0 ++#define ISPCCDC_FMT_VERT_FMTSLV_SHIFT 16 ++ ++#define ISPCCDC_FMT_HORZ_FMTSPH_MASK 0x1FFF0000 ++#define ISPCCDC_FMT_HORZ_FMTLNH_MASK 0x1FFF ++ ++#define ISPCCDC_FMT_VERT_FMTSLV_MASK 0x1FFF0000 ++#define ISPCCDC_FMT_VERT_FMTLNV_MASK 0x1FFF ++ ++#define ISPCCDC_VP_OUT_HORZ_ST_SHIFT 0 ++#define ISPCCDC_VP_OUT_HORZ_NUM_SHIFT 4 ++#define ISPCCDC_VP_OUT_VERT_NUM_SHIFT 17 ++ ++#define ISPRSZ_PID_PREV_SHIFT 0 ++#define ISPRSZ_PID_CID_SHIFT 8 ++#define ISPRSZ_PID_TID_SHIFT 16 ++ ++#define ISPRSZ_PCR_ENABLE 0x5 ++#define ISPRSZ_PCR_BUSY (1 << 1) ++ ++#define ISPRSZ_CNT_HRSZ_SHIFT 0 ++#define ISPRSZ_CNT_HRSZ_MASK 0x3FF ++#define ISPRSZ_CNT_VRSZ_SHIFT 10 ++#define ISPRSZ_CNT_VRSZ_MASK 0xFFC00 ++#define ISPRSZ_CNT_HSTPH_SHIFT 20 ++#define ISPRSZ_CNT_HSTPH_MASK 0x700000 ++#define ISPRSZ_CNT_VSTPH_SHIFT 23 ++#define ISPRSZ_CNT_VSTPH_MASK 0x3800000 ++#define ISPRSZ_CNT_CBILIN_MASK 0x20000000 ++#define ISPRSZ_CNT_INPTYP_MASK 0x08000000 ++#define ISPRSZ_CNT_PIXFMT_MASK 0x04000000 ++#define ISPRSZ_CNT_YCPOS (1 << 26) ++#define ISPRSZ_CNT_INPTYP (1 << 27) ++#define ISPRSZ_CNT_INPSRC (1 << 28) ++#define ISPRSZ_CNT_CBILIN (1 << 29) ++ ++#define ISPRSZ_OUT_SIZE_HORZ_SHIFT 0 ++#define ISPRSZ_OUT_SIZE_HORZ_MASK 0x7FF ++#define ISPRSZ_OUT_SIZE_VERT_SHIFT 16 ++#define ISPRSZ_OUT_SIZE_VERT_MASK 0x7FF0000 ++ ++ ++#define ISPRSZ_IN_START_HORZ_ST_SHIFT 0 ++#define ISPRSZ_IN_START_HORZ_ST_MASK 0x1FFF ++#define ISPRSZ_IN_START_VERT_ST_SHIFT 16 ++#define ISPRSZ_IN_START_VERT_ST_MASK 0x1FFF0000 ++ ++ ++#define ISPRSZ_IN_SIZE_HORZ_SHIFT 0 ++#define ISPRSZ_IN_SIZE_HORZ_MASK 0x1FFF ++#define ISPRSZ_IN_SIZE_VERT_SHIFT 16 ++#define ISPRSZ_IN_SIZE_VERT_MASK 0x1FFF0000 ++ ++#define ISPRSZ_SDR_INADD_ADDR_SHIFT 0 ++#define ISPRSZ_SDR_INADD_ADDR_MASK 0xFFFFFFFF ++ ++#define ISPRSZ_SDR_INOFF_OFFSET_SHIFT 0 ++#define ISPRSZ_SDR_INOFF_OFFSET_MASK 0xFFFF ++ ++#define ISPRSZ_SDR_OUTADD_ADDR_SHIFT 0 ++#define ISPRSZ_SDR_OUTADD_ADDR_MASK 0xFFFFFFFF ++ ++ ++#define ISPRSZ_SDR_OUTOFF_OFFSET_SHIFT 0 ++#define ISPRSZ_SDR_OUTOFF_OFFSET_MASK 0xFFFF ++ ++#define ISPRSZ_HFILT10_COEF0_SHIFT 0 ++#define ISPRSZ_HFILT10_COEF0_MASK 0x3FF ++#define ISPRSZ_HFILT10_COEF1_SHIFT 16 ++#define ISPRSZ_HFILT10_COEF1_MASK 0x3FF0000 ++ ++#define ISPRSZ_HFILT32_COEF2_SHIFT 0 ++#define ISPRSZ_HFILT32_COEF2_MASK 0x3FF ++#define ISPRSZ_HFILT32_COEF3_SHIFT 16 ++#define ISPRSZ_HFILT32_COEF3_MASK 0x3FF0000 ++ ++#define ISPRSZ_HFILT54_COEF4_SHIFT 0 ++#define ISPRSZ_HFILT54_COEF4_MASK 0x3FF ++#define ISPRSZ_HFILT54_COEF5_SHIFT 16 ++#define ISPRSZ_HFILT54_COEF5_MASK 0x3FF0000 ++ ++#define ISPRSZ_HFILT76_COEFF6_SHIFT 0 ++#define ISPRSZ_HFILT76_COEFF6_MASK 0x3FF ++#define ISPRSZ_HFILT76_COEFF7_SHIFT 16 ++#define ISPRSZ_HFILT76_COEFF7_MASK 0x3FF0000 ++ ++#define ISPRSZ_HFILT98_COEFF8_SHIFT 0 ++#define ISPRSZ_HFILT98_COEFF8_MASK 0x3FF ++#define ISPRSZ_HFILT98_COEFF9_SHIFT 16 ++#define ISPRSZ_HFILT98_COEFF9_MASK 0x3FF0000 ++ ++#define ISPRSZ_HFILT1110_COEF10_SHIFT 0 ++#define ISPRSZ_HFILT1110_COEF10_MASK 0x3FF ++#define ISPRSZ_HFILT1110_COEF11_SHIFT 16 ++#define ISPRSZ_HFILT1110_COEF11_MASK 0x3FF0000 ++ ++#define ISPRSZ_HFILT1312_COEFF12_SHIFT 0 ++#define ISPRSZ_HFILT1312_COEFF12_MASK 0x3FF ++#define ISPRSZ_HFILT1312_COEFF13_SHIFT 16 ++#define ISPRSZ_HFILT1312_COEFF13_MASK 0x3FF0000 ++ ++#define ISPRSZ_HFILT1514_COEFF14_SHIFT 0 ++#define ISPRSZ_HFILT1514_COEFF14_MASK 0x3FF ++#define ISPRSZ_HFILT1514_COEFF15_SHIFT 16 ++#define ISPRSZ_HFILT1514_COEFF15_MASK 0x3FF0000 ++ ++#define ISPRSZ_HFILT1716_COEF16_SHIFT 0 ++#define ISPRSZ_HFILT1716_COEF16_MASK 0x3FF ++#define ISPRSZ_HFILT1716_COEF17_SHIFT 16 ++#define ISPRSZ_HFILT1716_COEF17_MASK 0x3FF0000 ++ ++#define ISPRSZ_HFILT1918_COEF18_SHIFT 0 ++#define ISPRSZ_HFILT1918_COEF18_MASK 0x3FF ++#define ISPRSZ_HFILT1918_COEF19_SHIFT 16 ++#define ISPRSZ_HFILT1918_COEF19_MASK 0x3FF0000 ++ ++#define ISPRSZ_HFILT2120_COEF20_SHIFT 0 ++#define ISPRSZ_HFILT2120_COEF20_MASK 0x3FF ++#define ISPRSZ_HFILT2120_COEF21_SHIFT 16 ++#define ISPRSZ_HFILT2120_COEF21_MASK 0x3FF0000 ++ ++#define ISPRSZ_HFILT2322_COEF22_SHIFT 0 ++#define ISPRSZ_HFILT2322_COEF22_MASK 0x3FF ++#define ISPRSZ_HFILT2322_COEF23_SHIFT 16 ++#define ISPRSZ_HFILT2322_COEF23_MASK 0x3FF0000 ++ ++#define ISPRSZ_HFILT2524_COEF24_SHIFT 0 ++#define ISPRSZ_HFILT2524_COEF24_MASK 0x3FF ++#define ISPRSZ_HFILT2524_COEF25_SHIFT 16 ++#define ISPRSZ_HFILT2524_COEF25_MASK 0x3FF0000 ++ ++#define ISPRSZ_HFILT2726_COEF26_SHIFT 0 ++#define ISPRSZ_HFILT2726_COEF26_MASK 0x3FF ++#define ISPRSZ_HFILT2726_COEF27_SHIFT 16 ++#define ISPRSZ_HFILT2726_COEF27_MASK 0x3FF0000 ++ ++#define ISPRSZ_HFILT2928_COEF28_SHIFT 0 ++#define ISPRSZ_HFILT2928_COEF28_MASK 0x3FF ++#define ISPRSZ_HFILT2928_COEF29_SHIFT 16 ++#define ISPRSZ_HFILT2928_COEF29_MASK 0x3FF0000 ++ ++#define ISPRSZ_HFILT3130_COEF30_SHIFT 0 ++#define ISPRSZ_HFILT3130_COEF30_MASK 0x3FF ++#define ISPRSZ_HFILT3130_COEF31_SHIFT 16 ++#define ISPRSZ_HFILT3130_COEF31_MASK 0x3FF0000 ++ ++#define ISPRSZ_VFILT10_COEF0_SHIFT 0 ++#define ISPRSZ_VFILT10_COEF0_MASK 0x3FF ++#define ISPRSZ_VFILT10_COEF1_SHIFT 16 ++#define ISPRSZ_VFILT10_COEF1_MASK 0x3FF0000 ++ ++#define ISPRSZ_VFILT32_COEF2_SHIFT 0 ++#define ISPRSZ_VFILT32_COEF2_MASK 0x3FF ++#define ISPRSZ_VFILT32_COEF3_SHIFT 16 ++#define ISPRSZ_VFILT32_COEF3_MASK 0x3FF0000 ++ ++#define ISPRSZ_VFILT54_COEF4_SHIFT 0 ++#define ISPRSZ_VFILT54_COEF4_MASK 0x3FF ++#define ISPRSZ_VFILT54_COEF5_SHIFT 16 ++#define ISPRSZ_VFILT54_COEF5_MASK 0x3FF0000 ++ ++#define ISPRSZ_VFILT76_COEFF6_SHIFT 0 ++#define ISPRSZ_VFILT76_COEFF6_MASK 0x3FF ++#define ISPRSZ_VFILT76_COEFF7_SHIFT 16 ++#define ISPRSZ_VFILT76_COEFF7_MASK 0x3FF0000 ++ ++#define ISPRSZ_VFILT98_COEFF8_SHIFT 0 ++#define ISPRSZ_VFILT98_COEFF8_MASK 0x3FF ++#define ISPRSZ_VFILT98_COEFF9_SHIFT 16 ++#define ISPRSZ_VFILT98_COEFF9_MASK 0x3FF0000 ++ ++#define ISPRSZ_VFILT1110_COEF10_SHIFT 0 ++#define ISPRSZ_VFILT1110_COEF10_MASK 0x3FF ++#define ISPRSZ_VFILT1110_COEF11_SHIFT 16 ++#define ISPRSZ_VFILT1110_COEF11_MASK 0x3FF0000 ++ ++#define ISPRSZ_VFILT1312_COEFF12_SHIFT 0 ++#define ISPRSZ_VFILT1312_COEFF12_MASK 0x3FF ++#define ISPRSZ_VFILT1312_COEFF13_SHIFT 16 ++#define ISPRSZ_VFILT1312_COEFF13_MASK 0x3FF0000 ++ ++#define ISPRSZ_VFILT1514_COEFF14_SHIFT 0 ++#define ISPRSZ_VFILT1514_COEFF14_MASK 0x3FF ++#define ISPRSZ_VFILT1514_COEFF15_SHIFT 16 ++#define ISPRSZ_VFILT1514_COEFF15_MASK 0x3FF0000 ++ ++#define ISPRSZ_VFILT1716_COEF16_SHIFT 0 ++#define ISPRSZ_VFILT1716_COEF16_MASK 0x3FF ++#define ISPRSZ_VFILT1716_COEF17_SHIFT 16 ++#define ISPRSZ_VFILT1716_COEF17_MASK 0x3FF0000 ++ ++#define ISPRSZ_VFILT1918_COEF18_SHIFT 0 ++#define ISPRSZ_VFILT1918_COEF18_MASK 0x3FF ++#define ISPRSZ_VFILT1918_COEF19_SHIFT 16 ++#define ISPRSZ_VFILT1918_COEF19_MASK 0x3FF0000 ++ ++#define ISPRSZ_VFILT2120_COEF20_SHIFT 0 ++#define ISPRSZ_VFILT2120_COEF20_MASK 0x3FF ++#define ISPRSZ_VFILT2120_COEF21_SHIFT 16 ++#define ISPRSZ_VFILT2120_COEF21_MASK 0x3FF0000 ++ ++#define ISPRSZ_VFILT2322_COEF22_SHIFT 0 ++#define ISPRSZ_VFILT2322_COEF22_MASK 0x3FF ++#define ISPRSZ_VFILT2322_COEF23_SHIFT 16 ++#define ISPRSZ_VFILT2322_COEF23_MASK 0x3FF0000 ++ ++#define ISPRSZ_VFILT2524_COEF24_SHIFT 0 ++#define ISPRSZ_VFILT2524_COEF24_MASK 0x3FF ++#define ISPRSZ_VFILT2524_COEF25_SHIFT 16 ++#define ISPRSZ_VFILT2524_COEF25_MASK 0x3FF0000 ++ ++#define ISPRSZ_VFILT2726_COEF26_SHIFT 0 ++#define ISPRSZ_VFILT2726_COEF26_MASK 0x3FF ++#define ISPRSZ_VFILT2726_COEF27_SHIFT 16 ++#define ISPRSZ_VFILT2726_COEF27_MASK 0x3FF0000 ++ ++#define ISPRSZ_VFILT2928_COEF28_SHIFT 0 ++#define ISPRSZ_VFILT2928_COEF28_MASK 0x3FF ++#define ISPRSZ_VFILT2928_COEF29_SHIFT 16 ++#define ISPRSZ_VFILT2928_COEF29_MASK 0x3FF0000 ++ ++#define ISPRSZ_VFILT3130_COEF30_SHIFT 0 ++#define ISPRSZ_VFILT3130_COEF30_MASK 0x3FF ++#define ISPRSZ_VFILT3130_COEF31_SHIFT 16 ++#define ISPRSZ_VFILT3130_COEF31_MASK 0x3FF0000 ++ ++#define ISPRSZ_YENH_CORE_SHIFT 0 ++#define ISPRSZ_YENH_CORE_MASK 0xFF ++#define ISPRSZ_YENH_SLOP_SHIFT 8 ++#define ISPRSZ_YENH_SLOP_MASK 0xF00 ++#define ISPRSZ_YENH_GAIN_SHIFT 12 ++#define ISPRSZ_YENH_GAIN_MASK 0xF000 ++#define ISPRSZ_YENH_ALGO_SHIFT 16 ++#define ISPRSZ_YENH_ALGO_MASK 0x30000 ++ ++#define ISPH3A_PCR_AEW_ALAW_EN_SHIFT 1 ++#define ISPH3A_PCR_AF_MED_TH_SHIFT 3 ++#define ISPH3A_PCR_AF_RGBPOS_SHIFT 11 ++#define ISPH3A_PCR_AEW_AVE2LMT_SHIFT 22 ++#define ISPH3A_PCR_AEW_AVE2LMT_MASK 0xFFC00000 ++#define ISPH3A_PCR_BUSYAF (1 << 15) ++#define ISPH3A_PCR_BUSYAEAWB (1 << 18) ++ ++#define ISPH3A_AEWWIN1_WINHC_SHIFT 0 ++#define ISPH3A_AEWWIN1_WINHC_MASK 0x3F ++#define ISPH3A_AEWWIN1_WINVC_SHIFT 6 ++#define ISPH3A_AEWWIN1_WINVC_MASK 0x1FC0 ++#define ISPH3A_AEWWIN1_WINW_SHIFT 13 ++#define ISPH3A_AEWWIN1_WINW_MASK 0xFE000 ++#define ISPH3A_AEWWIN1_WINH_SHIFT 24 ++#define ISPH3A_AEWWIN1_WINH_MASK 0x7F000000 ++ ++#define ISPH3A_AEWINSTART_WINSH_SHIFT 0 ++#define ISPH3A_AEWINSTART_WINSH_MASK 0x0FFF ++#define ISPH3A_AEWINSTART_WINSV_SHIFT 16 ++#define ISPH3A_AEWINSTART_WINSV_MASK 0x0FFF0000 ++ ++#define ISPH3A_AEWINBLK_WINH_SHIFT 0 ++#define ISPH3A_AEWINBLK_WINH_MASK 0x7F ++#define ISPH3A_AEWINBLK_WINSV_SHIFT 16 ++#define ISPH3A_AEWINBLK_WINSV_MASK 0x0FFF0000 ++ ++#define ISPH3A_AEWSUBWIN_AEWINCH_SHIFT 0 ++#define ISPH3A_AEWSUBWIN_AEWINCH_MASK 0x0F ++#define ISPH3A_AEWSUBWIN_AEWINCV_SHIFT 8 ++#define ISPH3A_AEWSUBWIN_AEWINCV_MASK 0x0F00 ++ ++#define ISPHIST_PCR_ENABLE_SHIFT 0 ++#define ISPHIST_PCR_ENABLE_MASK 0x01 ++#define ISPHIST_PCR_BUSY 0x02 ++ ++#define ISPHIST_CNT_DATASIZE_SHIFT 8 ++#define ISPHIST_CNT_DATASIZE_MASK 0x0100 ++#define ISPHIST_CNT_CLEAR_SHIFT 7 ++#define ISPHIST_CNT_CLEAR_MASK 0x080 ++#define ISPHIST_CNT_CFA_SHIFT 6 ++#define ISPHIST_CNT_CFA_MASK 0x040 ++#define ISPHIST_CNT_BINS_SHIFT 4 ++#define ISPHIST_CNT_BINS_MASK 0x030 ++#define ISPHIST_CNT_SOURCE_SHIFT 3 ++#define ISPHIST_CNT_SOURCE_MASK 0x08 ++#define ISPHIST_CNT_SHIFT_SHIFT 0 ++#define ISPHIST_CNT_SHIFT_MASK 0x07 ++ ++#define ISPHIST_WB_GAIN_WG00_SHIFT 24 ++#define ISPHIST_WB_GAIN_WG00_MASK 0xFF000000 ++#define ISPHIST_WB_GAIN_WG01_SHIFT 16 ++#define ISPHIST_WB_GAIN_WG01_MASK 0xFF0000 ++#define ISPHIST_WB_GAIN_WG02_SHIFT 8 ++#define ISPHIST_WB_GAIN_WG02_MASK 0xFF00 ++#define ISPHIST_WB_GAIN_WG03_SHIFT 0 ++#define ISPHIST_WB_GAIN_WG03_MASK 0xFF ++ ++#define ISPHIST_REGHORIZ_HSTART_SHIFT 16 /* ++ * REGION 0 to 3 HORZ ++ * and VERT ++ */ ++#define ISPHIST_REGHORIZ_HSTART_MASK 0x3FFF0000 ++#define ISPHIST_REGHORIZ_HEND_SHIFT 0 ++#define ISPHIST_REGHORIZ_HEND_MASK 0x3FFF ++#define ISPHIST_REGVERT_VSTART_SHIFT 16 ++#define ISPHIST_REGVERT_VSTART_MASK 0x3FFF0000 ++#define ISPHIST_REGVERT_VEND_SHIFT 0 ++#define ISPHIST_REGVERT_VEND_MASK 0x3FFF ++ ++#define ISPHIST_REGHORIZ_MASK 0x3FFF3FFF ++#define ISPHIST_REGVERT_MASK 0x3FFF3FFF ++ ++#define ISPHIST_ADDR_SHIFT 0 ++#define ISPHIST_ADDR_MASK 0x3FF ++ ++#define ISPHIST_DATA_SHIFT 0 ++#define ISPHIST_DATA_MASK 0xFFFFF ++ ++#define ISPHIST_RADD_SHIFT 0 ++#define ISPHIST_RADD_MASK 0xFFFFFFFF ++ ++#define ISPHIST_RADD_OFF_SHIFT 0 ++#define ISPHIST_RADD_OFF_MASK 0xFFFF ++ ++#define ISPHIST_HV_INFO_HSIZE_SHIFT 16 ++#define ISPHIST_HV_INFO_HSIZE_MASK 0x3FFF0000 ++#define ISPHIST_HV_INFO_VSIZE_SHIFT 0 ++#define ISPHIST_HV_INFO_VSIZE_MASK 0x3FFF ++ ++#define ISPHIST_HV_INFO_MASK 0x3FFF3FFF ++ ++#define ISPCCDC_LSC_GAIN_MODE_N_MASK 0x700 ++#define ISPCCDC_LSC_GAIN_MODE_N_SHIFT 8 ++#define ISPCCDC_LSC_GAIN_MODE_M_MASK 0x3800 ++#define ISPCCDC_LSC_GAIN_MODE_M_SHIFT 12 ++#define ISPCCDC_LSC_GAIN_FORMAT_MASK 0xE ++#define ISPCCDC_LSC_GAIN_FORMAT_SHIFT 1 ++#define ISPCCDC_LSC_AFTER_REFORMATTER_MASK (1<<6) ++ ++#define ISPCCDC_LSC_INITIAL_X_MASK 0x3F ++#define ISPCCDC_LSC_INITIAL_X_SHIFT 0 ++#define ISPCCDC_LSC_INITIAL_Y_MASK 0x3F0000 ++#define ISPCCDC_LSC_INITIAL_Y_SHIFT 16 ++ ++#define ISPMMU_REVISION_REV_MINOR_MASK 0xF ++#define ISPMMU_REVISION_REV_MAJOR_SHIFT 0x4 ++ ++#define IRQENABLE_MULTIHITFAULT (1<<4) ++#define IRQENABLE_TWFAULT (1<<3) ++#define IRQENABLE_EMUMISS (1<<2) ++#define IRQENABLE_TRANSLNFAULT (1<<1) ++#define IRQENABLE_TLBMISS (1) ++ ++#define ISPMMU_MMUCNTL_MMU_EN (1<<1) ++#define ISPMMU_MMUCNTL_TWL_EN (1<<2) ++#define ISPMMU_MMUCNTL_EMUTLBUPDATE (1<<3) ++#define ISPMMU_AUTOIDLE 0x1 ++#define ISPMMU_SIDLEMODE_FORCEIDLE 0 ++#define ISPMMU_SIDLEMODE_NOIDLE 1 ++#define ISPMMU_SIDLEMODE_SMARTIDLE 2 ++#define ISPMMU_SIDLEMODE_SHIFT 3 ++ ++#define ISPCSI1_AUTOIDLE 0x1 ++#define ISPCSI1_MIDLEMODE_SHIFT 12 ++#define ISPCSI1_MIDLEMODE_FORCESTANDBY 0x0 ++#define ISPCSI1_MIDLEMODE_NOSTANDBY 0x1 ++#define ISPCSI1_MIDLEMODE_SMARTSTANDBY 0x2 ++ ++/* CSI2 receiver registers (ES2.0) */ ++#define ISPCSI2_REVISION (0x000) ++#define ISPCSI2_SYSCONFIG (0x010) ++#define ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SHIFT 12 ++#define ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK \ ++ (0x3 << ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SHIFT) ++#define ISPCSI2_SYSCONFIG_MSTANDBY_MODE_FORCE \ ++ (0x0 << ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SHIFT) ++#define ISPCSI2_SYSCONFIG_MSTANDBY_MODE_NO \ ++ (0x1 << ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SHIFT) ++#define ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SMART \ ++ (0x2 << ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SHIFT) ++#define ISPCSI2_SYSCONFIG_SOFT_RESET_SHIFT 1 ++#define ISPCSI2_SYSCONFIG_SOFT_RESET_MASK \ ++ (0x1 << ISPCSI2_SYSCONFIG_SOFT_RESET_SHIFT) ++#define ISPCSI2_SYSCONFIG_SOFT_RESET_NORMAL \ ++ (0x0 << ISPCSI2_SYSCONFIG_SOFT_RESET_SHIFT) ++#define ISPCSI2_SYSCONFIG_SOFT_RESET_RESET \ ++ (0x1 << ISPCSI2_SYSCONFIG_SOFT_RESET_SHIFT) ++#define ISPCSI2_SYSCONFIG_AUTO_IDLE_SHIFT 0 ++#define ISPCSI2_SYSCONFIG_AUTO_IDLE_MASK \ ++ (0x1 << ISPCSI2_SYSCONFIG_AUTO_IDLE_SHIFT) ++#define ISPCSI2_SYSCONFIG_AUTO_IDLE_FREE \ ++ (0x0 << ISPCSI2_SYSCONFIG_AUTO_IDLE_SHIFT) ++#define ISPCSI2_SYSCONFIG_AUTO_IDLE_AUTO \ ++ (0x1 << ISPCSI2_SYSCONFIG_AUTO_IDLE_SHIFT) ++#define ISPCSI2_SYSSTATUS (0x014) ++#define ISPCSI2_SYSSTATUS_RESET_DONE_SHIFT 0 ++#define ISPCSI2_SYSSTATUS_RESET_DONE_MASK \ ++ (0x1 << ISPCSI2_SYSSTATUS_RESET_DONE_SHIFT) ++#define ISPCSI2_SYSSTATUS_RESET_DONE_ONGOING \ ++ (0x0 << ISPCSI2_SYSSTATUS_RESET_DONE_SHIFT) ++#define ISPCSI2_SYSSTATUS_RESET_DONE_DONE \ ++ (0x1 << ISPCSI2_SYSSTATUS_RESET_DONE_SHIFT) ++#define ISPCSI2_IRQSTATUS (0x018) ++#define ISPCSI2_IRQSTATUS_OCP_ERR_IRQ (1 << 14) ++#define ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ (1 << 13) ++#define ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ (1 << 12) ++#define ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ (1 << 11) ++#define ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ (1 << 10) ++#define ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ (1 << 9) ++#define ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ (1 << 8) ++#define ISPCSI2_IRQSTATUS_CONTEXT(n) (1 << (n)) ++ ++#define ISPCSI2_IRQENABLE (0x01C) ++#define ISPCSI2_CTRL (0x040) ++#define ISPCSI2_CTRL_VP_CLK_EN_SHIFT 15 ++#define ISPCSI2_CTRL_VP_CLK_EN_MASK (0x1 << ISPCSI2_CTRL_VP_CLK_EN_SHIFT) ++#define ISPCSI2_CTRL_VP_CLK_EN_DISABLE (0x0 << ISPCSI2_CTRL_VP_CLK_EN_SHIFT) ++#define ISPCSI2_CTRL_VP_CLK_EN_ENABLE (0x1 << ISPCSI2_CTRL_VP_CLK_EN_SHIFT) ++ ++#define ISPCSI2_CTRL_VP_ONLY_EN_SHIFT 11 ++#define ISPCSI2_CTRL_VP_ONLY_EN_MASK (0x1 << ISPCSI2_CTRL_VP_ONLY_EN_SHIFT) ++#define ISPCSI2_CTRL_VP_ONLY_EN_DISABLE (0x0 << ISPCSI2_CTRL_VP_ONLY_EN_SHIFT) ++#define ISPCSI2_CTRL_VP_ONLY_EN_ENABLE (0x1 << ISPCSI2_CTRL_VP_ONLY_EN_SHIFT) ++ ++#define ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT 8 ++#define ISPCSI2_CTRL_VP_OUT_CTRL_MASK (0x3 << \ ++ ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT) ++#define ISPCSI2_CTRL_VP_OUT_CTRL_DISABLE (0x0 << \ ++ ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT) ++#define ISPCSI2_CTRL_VP_OUT_CTRL_DIV2 (0x1 << \ ++ ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT) ++#define ISPCSI2_CTRL_VP_OUT_CTRL_DIV3 (0x2 << \ ++ ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT) ++#define ISPCSI2_CTRL_VP_OUT_CTRL_DIV4 (0x3 << \ ++ ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT) ++ ++#define ISPCSI2_CTRL_DBG_EN_SHIFT 7 ++#define ISPCSI2_CTRL_DBG_EN_MASK (0x1 << ISPCSI2_CTRL_DBG_EN_SHIFT) ++#define ISPCSI2_CTRL_DBG_EN_DISABLE (0x0 << ISPCSI2_CTRL_DBG_EN_SHIFT) ++#define ISPCSI2_CTRL_DBG_EN_ENABLE (0x1 << ISPCSI2_CTRL_DBG_EN_SHIFT) ++ ++#define ISPCSI2_CTRL_BURST_SIZE_SHIFT 5 ++#define ISPCSI2_CTRL_BURST_SIZE_MASK (0x3 << \ ++ ISPCSI2_CTRL_BURST_SIZE_SHIFT) ++#define ISPCSI2_CTRL_BURST_SIZE_MYSTERY_VAL (0x2 << \ ++ ISPCSI2_CTRL_BURST_SIZE_SHIFT) ++ ++#define ISPCSI2_CTRL_FRAME_SHIFT 3 ++#define ISPCSI2_CTRL_FRAME_MASK (0x1 << ISPCSI2_CTRL_FRAME_SHIFT) ++#define ISPCSI2_CTRL_FRAME_DISABLE_IMM (0x0 << ISPCSI2_CTRL_FRAME_SHIFT) ++#define ISPCSI2_CTRL_FRAME_DISABLE_FEC (0x1 << ISPCSI2_CTRL_FRAME_SHIFT) ++ ++#define ISPCSI2_CTRL_ECC_EN_SHIFT 2 ++#define ISPCSI2_CTRL_ECC_EN_MASK (0x1 << ISPCSI2_CTRL_ECC_EN_SHIFT) ++#define ISPCSI2_CTRL_ECC_EN_DISABLE (0x0 << ISPCSI2_CTRL_ECC_EN_SHIFT) ++#define ISPCSI2_CTRL_ECC_EN_ENABLE (0x1 << ISPCSI2_CTRL_ECC_EN_SHIFT) ++ ++#define ISPCSI2_CTRL_SECURE_SHIFT 1 ++#define ISPCSI2_CTRL_SECURE_MASK (0x1 << ISPCSI2_CTRL_SECURE_SHIFT) ++#define ISPCSI2_CTRL_SECURE_DISABLE (0x0 << ISPCSI2_CTRL_SECURE_SHIFT) ++#define ISPCSI2_CTRL_SECURE_ENABLE (0x1 << ISPCSI2_CTRL_SECURE_SHIFT) ++ ++#define ISPCSI2_CTRL_IF_EN_SHIFT 0 ++#define ISPCSI2_CTRL_IF_EN_MASK (0x1 << ISPCSI2_CTRL_IF_EN_SHIFT) ++#define ISPCSI2_CTRL_IF_EN_DISABLE (0x0 << ISPCSI2_CTRL_IF_EN_SHIFT) ++#define ISPCSI2_CTRL_IF_EN_ENABLE (0x1 << ISPCSI2_CTRL_IF_EN_SHIFT) ++ ++#define ISPCSI2_DBG_H (0x044) ++#define ISPCSI2_GNQ (0x048) ++#define ISPCSI2_COMPLEXIO_CFG1 (0x050) ++#define ISPCSI2_COMPLEXIO_CFG1_RESET_DONE_SHIFT 29 ++#define ISPCSI2_COMPLEXIO_CFG1_RESET_DONE_MASK \ ++ (0x1 << ISPCSI2_COMPLEXIO_CFG1_RESET_DONE_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_RESET_DONE_ONGOING \ ++ (0x0 << ISPCSI2_COMPLEXIO_CFG1_RESET_DONE_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_RESET_DONE_DONE \ ++ (0x1 << ISPCSI2_COMPLEXIO_CFG1_RESET_DONE_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_SHIFT 27 ++#define ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_MASK \ ++ (0x3 << ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_OFF \ ++ (0x0 << ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_ON \ ++ (0x1 << ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_ULPW \ ++ (0x2 << ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_SHIFT 25 ++#define ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_MASK \ ++ (0x3 << ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_OFF \ ++ (0x0 << ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_ON \ ++ (0x1 << ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_ULPW \ ++ (0x2 << ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_PWR_AUTO_SHIFT 24 ++#define ISPCSI2_COMPLEXIO_CFG1_PWR_AUTO_MASK \ ++ (0x1 << ISPCSI2_COMPLEXIO_CFG1_PWR_AUTO_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_PWR_AUTO_DISABLE \ ++ (0x0 << ISPCSI2_COMPLEXIO_CFG1_PWR_AUTO_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_PWR_AUTO_ENABLE \ ++ (0x1 << ISPCSI2_COMPLEXIO_CFG1_PWR_AUTO_SHIFT) ++ ++#define ISPCSI2_COMPLEXIO_CFG1_DATA_POL_SHIFT(n) (3 + ((n) * 4)) ++#define ISPCSI2_COMPLEXIO_CFG1_DATA_POL_MASK(n) \ ++ (0x1 << ISPCSI2_COMPLEXIO_CFG1_DATA_POL_SHIFT(n)) ++#define ISPCSI2_COMPLEXIO_CFG1_DATA_POL_PN(n) \ ++ (0x0 << ISPCSI2_COMPLEXIO_CFG1_DATA_POL_SHIFT(n)) ++#define ISPCSI2_COMPLEXIO_CFG1_DATA_POL_NP(n) \ ++ (0x1 << ISPCSI2_COMPLEXIO_CFG1_DATA_POL_SHIFT(n)) ++ ++#define ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_SHIFT(n) ((n) * 4) ++#define ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_MASK(n) \ ++ (0x7 << ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_SHIFT(n)) ++#define ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_NC(n) \ ++ (0x0 << ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_SHIFT(n)) ++#define ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_1(n) \ ++ (0x1 << ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_SHIFT(n)) ++#define ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_2(n) \ ++ (0x2 << ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_SHIFT(n)) ++#define ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_3(n) \ ++ (0x3 << ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_SHIFT(n)) ++#define ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_4(n) \ ++ (0x4 << ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_SHIFT(n)) ++#define ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_5(n) \ ++ (0x5 << ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_SHIFT(n)) ++ ++#define ISPCSI2_COMPLEXIO_CFG1_CLOCK_POL_SHIFT 3 ++#define ISPCSI2_COMPLEXIO_CFG1_CLOCK_POL_MASK \ ++ (0x1 << ISPCSI2_COMPLEXIO_CFG1_CLOCK_POL_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_CLOCK_POL_PN \ ++ (0x0 << ISPCSI2_COMPLEXIO_CFG1_CLOCK_POL_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_CLOCK_POL_NP \ ++ (0x1 << ISPCSI2_COMPLEXIO_CFG1_CLOCK_POL_SHIFT) ++ ++#define ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_SHIFT 0 ++#define ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_MASK \ ++ (0x7 << ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_1 \ ++ (0x1 << ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_2 \ ++ (0x2 << ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_3 \ ++ (0x3 << ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_4 \ ++ (0x4 << ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_SHIFT) ++#define ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_5 \ ++ (0x5 << ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_SHIFT) ++ ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS (0x054) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_STATEALLULPMEXIT (1 << 26) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_STATEALLULPMENTER (1 << 25) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_STATEULPM5 (1 << 24) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_STATEULPM4 (1 << 23) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_STATEULPM3 (1 << 22) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_STATEULPM2 (1 << 21) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_STATEULPM1 (1 << 20) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRCONTROL5 (1 << 19) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRCONTROL4 (1 << 18) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRCONTROL3 (1 << 17) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRCONTROL2 (1 << 16) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRCONTROL1 (1 << 15) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRESC5 (1 << 14) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRESC4 (1 << 13) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRESC3 (1 << 12) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRESC2 (1 << 11) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRESC1 (1 << 10) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRSOTSYNCHS5 (1 << 9) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRSOTSYNCHS4 (1 << 8) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRSOTSYNCHS3 (1 << 7) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRSOTSYNCHS2 (1 << 6) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRSOTSYNCHS1 (1 << 5) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRSOTHS5 (1 << 4) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRSOTHS4 (1 << 3) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRSOTHS3 (1 << 2) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRSOTHS2 (1 << 1) ++#define ISPCSI2_COMPLEXIO1_IRQSTATUS_ERRSOTHS1 1 ++ ++#define ISPCSI2_SHORT_PACKET (0x05C) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE (0x060) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_STATEALLULPMEXIT (1 << 26) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_STATEALLULPMENTER (1 << 25) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_STATEULPM5 (1 << 24) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_STATEULPM4 (1 << 23) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_STATEULPM3 (1 << 22) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_STATEULPM2 (1 << 21) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_STATEULPM1 (1 << 20) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRCONTROL5 (1 << 19) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRCONTROL4 (1 << 18) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRCONTROL3 (1 << 17) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRCONTROL2 (1 << 16) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRCONTROL1 (1 << 15) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRESC5 (1 << 14) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRESC4 (1 << 13) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRESC3 (1 << 12) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRESC2 (1 << 11) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRESC1 (1 << 10) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTSYNCHS5 (1 << 9) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTSYNCHS4 (1 << 8) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTSYNCHS3 (1 << 7) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTSYNCHS2 (1 << 6) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTSYNCHS1 (1 << 5) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTHS5 (1 << 4) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTHS4 (1 << 3) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTHS3 (1 << 2) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTHS2 (1 << 1) ++#define ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTHS1 1 ++#define ISPCSI2_DBG_P (0x068) ++#define ISPCSI2_TIMING (0x06C) ++ ++ ++#define ISPCSI2_TIMING_FORCE_RX_MODE_IO_SHIFT(n) \ ++ ((16 * ((n) - 1)) + 15) ++#define ISPCSI2_TIMING_FORCE_RX_MODE_IO_MASK(n) \ ++ (0x1 << ISPCSI2_TIMING_FORCE_RX_MODE_IO_SHIFT(n)) ++#define ISPCSI2_TIMING_FORCE_RX_MODE_IO_DISABLE(n) \ ++ (0x0 << ISPCSI2_TIMING_FORCE_RX_MODE_IO_SHIFT(n)) ++#define ISPCSI2_TIMING_FORCE_RX_MODE_IO_ENABLE(n) \ ++ (0x1 << ISPCSI2_TIMING_FORCE_RX_MODE_IO_SHIFT(n)) ++#define ISPCSI2_TIMING_STOP_STATE_X16_IO_SHIFT(n) ((16 * ((n) - 1)) + 14) ++#define ISPCSI2_TIMING_STOP_STATE_X16_IO_MASK(n) \ ++ (0x1 << ISPCSI2_TIMING_STOP_STATE_X16_IO_SHIFT(n)) ++#define ISPCSI2_TIMING_STOP_STATE_X16_IO_DISABLE(n) \ ++ (0x0 << ISPCSI2_TIMING_STOP_STATE_X16_IO_SHIFT(n)) ++#define ISPCSI2_TIMING_STOP_STATE_X16_IO_ENABLE(n) \ ++ (0x1 << ISPCSI2_TIMING_STOP_STATE_X16_IO_SHIFT(n)) ++#define ISPCSI2_TIMING_STOP_STATE_X4_IO_SHIFT(n) ((16 * ((n) - 1)) + 13) ++#define ISPCSI2_TIMING_STOP_STATE_X4_IO_MASK(n) \ ++ (0x1 << ISPCSI2_TIMING_STOP_STATE_X4_IO_SHIFT(n)) ++#define ISPCSI2_TIMING_STOP_STATE_X4_IO_DISABLE(n) \ ++ (0x0 << ISPCSI2_TIMING_STOP_STATE_X4_IO_SHIFT(n)) ++#define ISPCSI2_TIMING_STOP_STATE_X4_IO_ENABLE(n) \ ++ (0x1 << ISPCSI2_TIMING_STOP_STATE_X4_IO_SHIFT(n)) ++#define ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_SHIFT(n) (16 * ((n) - 1)) ++#define ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_MASK(n) \ ++ (0x1fff << ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_SHIFT(n)) ++ ++#define ISPCSI2_CTX_CTRL1(n) ((0x070) + 0x20 * (n)) ++#define ISPCSI2_CTX_CTRL1_COUNT_SHIFT 8 ++#define ISPCSI2_CTX_CTRL1_COUNT_MASK (0xFF << \ ++ ISPCSI2_CTX_CTRL1_COUNT_SHIFT) ++#define ISPCSI2_CTX_CTRL1_EOF_EN_SHIFT 7 ++#define ISPCSI2_CTX_CTRL1_EOF_EN_MASK \ ++ (0x1 << ISPCSI2_CTX_CTRL1_EOF_EN_SHIFT) ++#define ISPCSI2_CTX_CTRL1_EOF_EN_DISABLE \ ++ (0x0 << ISPCSI2_CTX_CTRL1_EOF_EN_SHIFT) ++#define ISPCSI2_CTX_CTRL1_EOF_EN_ENABLE \ ++ (0x1 << ISPCSI2_CTX_CTRL1_EOF_EN_SHIFT) ++#define ISPCSI2_CTX_CTRL1_EOL_EN_SHIFT 6 ++#define ISPCSI2_CTX_CTRL1_EOL_EN_MASK \ ++ (0x1 << ISPCSI2_CTX_CTRL1_EOL_EN_SHIFT) ++#define ISPCSI2_CTX_CTRL1_EOL_EN_DISABLE \ ++ (0x0 << ISPCSI2_CTX_CTRL1_EOL_EN_SHIFT) ++#define ISPCSI2_CTX_CTRL1_EOL_EN_ENABLE \ ++ (0x1 << ISPCSI2_CTX_CTRL1_EOL_EN_SHIFT) ++#define ISPCSI2_CTX_CTRL1_CS_EN_SHIFT 5 ++#define ISPCSI2_CTX_CTRL1_CS_EN_MASK \ ++ (0x1 << ISPCSI2_CTX_CTRL1_CS_EN_SHIFT) ++#define ISPCSI2_CTX_CTRL1_CS_EN_DISABLE \ ++ (0x0 << ISPCSI2_CTX_CTRL1_CS_EN_SHIFT) ++#define ISPCSI2_CTX_CTRL1_CS_EN_ENABLE \ ++ (0x1 << ISPCSI2_CTX_CTRL1_CS_EN_SHIFT) ++#define ISPCSI2_CTX_CTRL1_COUNT_UNLOCK_EN_SHIFT 4 ++#define ISPCSI2_CTX_CTRL1_COUNT_UNLOCK_EN_MASK \ ++ (0x1 << ISPCSI2_CTX_CTRL1_COUNT_UNLOCK_EN_SHIFT) ++#define ISPCSI2_CTX_CTRL1_COUNT_UNLOCK_EN_DISABLE \ ++ (0x0 << ISPCSI2_CTX_CTRL1_COUNT_UNLOCK_EN_SHIFT) ++#define ISPCSI2_CTX_CTRL1_COUNT_UNLOCK_EN_ENABLE \ ++ (0x1 << ISPCSI2_CTX_CTRL1_COUNT_UNLOCK_EN_SHIFT) ++#define ISPCSI2_CTX_CTRL1_PING_PONG_SHIFT 3 ++#define ISPCSI2_CTX_CTRL1_PING_PONG_MASK \ ++ (0x1 << ISPCSI2_CTX_CTRL1_PING_PONG_SHIFT) ++#define ISPCSI2_CTX_CTRL1_CTX_EN_SHIFT 0 ++#define ISPCSI2_CTX_CTRL1_CTX_EN_MASK \ ++ (0x1 << ISPCSI2_CTX_CTRL1_CTX_EN_SHIFT) ++#define ISPCSI2_CTX_CTRL1_CTX_EN_DISABLE \ ++ (0x0 << ISPCSI2_CTX_CTRL1_CTX_EN_SHIFT) ++#define ISPCSI2_CTX_CTRL1_CTX_EN_ENABLE \ ++ (0x1 << ISPCSI2_CTX_CTRL1_CTX_EN_SHIFT) ++ ++#define ISPCSI2_CTX_CTRL2(n) ((0x074) + 0x20 * (n)) ++#define ISPCSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT 11 ++#define ISPCSI2_CTX_CTRL2_VIRTUAL_ID_MASK \ ++ (0x3 << ISPCSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT) ++#define ISPCSI2_CTX_CTRL2_FORMAT_SHIFT 0 ++#define ISPCSI2_CTX_CTRL2_FORMAT_MASK (0x3FF << \ ++ ISPCSI2_CTX_CTRL2_FORMAT_SHIFT) ++ ++#define ISPCSI2_CTX_DAT_OFST(n) ((0x078) + 0x20 * (n)) ++#define ISPCSI2_CTX_DAT_OFST_OFST_SHIFT 5 ++#define ISPCSI2_CTX_DAT_OFST_OFST_MASK (0x7FF << \ ++ ISPCSI2_CTX_DAT_OFST_OFST_SHIFT) ++ ++#define ISPCSI2_CTX_DAT_PING_ADDR(n) ((0x07C) + 0x20 * (n)) ++#define ISPCSI2_CTX_DAT_PONG_ADDR(n) ((0x080) + 0x20 * (n)) ++#define ISPCSI2_CTX_IRQENABLE(n) ((0x084) + 0x20 * (n)) ++#define ISPCSI2_CTX_IRQENABLE_ECC_CORRECTION_IRQ (1 << 8) ++#define ISPCSI2_CTX_IRQENABLE_LINE_NUMBER_IRQ (1 << 7) ++#define ISPCSI2_CTX_IRQENABLE_FRAME_NUMBER_IRQ (1 << 6) ++#define ISPCSI2_CTX_IRQENABLE_CS_IRQ (1 << 5) ++#define ISPCSI2_CTX_IRQENABLE_LE_IRQ (1 << 3) ++#define ISPCSI2_CTX_IRQENABLE_LS_IRQ (1 << 2) ++#define ISPCSI2_CTX_IRQENABLE_FE_IRQ (1 << 1) ++#define ISPCSI2_CTX_IRQENABLE_FS_IRQ 1 ++#define ISPCSI2_CTX_IRQSTATUS(n) ((0x088) + 0x20 * (n)) ++#define ISPCSI2_CTX_IRQSTATUS_ECC_CORRECTION_IRQ (1 << 8) ++#define ISPCSI2_CTX_IRQSTATUS_LINE_NUMBER_IRQ (1 << 7) ++#define ISPCSI2_CTX_IRQSTATUS_FRAME_NUMBER_IRQ (1 << 6) ++#define ISPCSI2_CTX_IRQSTATUS_CS_IRQ (1 << 5) ++#define ISPCSI2_CTX_IRQSTATUS_LE_IRQ (1 << 3) ++#define ISPCSI2_CTX_IRQSTATUS_LS_IRQ (1 << 2) ++#define ISPCSI2_CTX_IRQSTATUS_FE_IRQ (1 << 1) ++#define ISPCSI2_CTX_IRQSTATUS_FS_IRQ 1 ++ ++#define ISPCSI2_CTX_CTRL3(n) ((0x08C) + 0x20 * (n)) ++#define ISPCSI2_CTX_CTRL3_ALPHA_SHIFT 5 ++#define ISPCSI2_CTX_CTRL3_ALPHA_MASK (0x3FFF << \ ++ ISPCSI2_CTX_CTRL3_ALPHA_SHIFT) ++ ++#define ISPCSI2PHY_CFG0 (0x000) ++#define ISPCSI2PHY_CFG0_THS_TERM_SHIFT 8 ++#define ISPCSI2PHY_CFG0_THS_TERM_MASK \ ++ (0xFF << ISPCSI2PHY_CFG0_THS_TERM_SHIFT) ++#define ISPCSI2PHY_CFG0_THS_TERM_RESETVAL \ ++ (0x04 << ISPCSI2PHY_CFG0_THS_TERM_SHIFT) ++#define ISPCSI2PHY_CFG0_THS_SETTLE_SHIFT 0 ++#define ISPCSI2PHY_CFG0_THS_SETTLE_MASK \ ++ (0xFF << ISPCSI2PHY_CFG0_THS_SETTLE_SHIFT) ++#define ISPCSI2PHY_CFG0_THS_SETTLE_RESETVAL \ ++ (0x27 << ISPCSI2PHY_CFG0_THS_SETTLE_SHIFT) ++#define ISPCSI2PHY_CFG1 (0x004) ++#define ISPCSI2PHY_CFG1_TCLK_TERM_SHIFT 18 ++#define ISPCSI2PHY_CFG1_TCLK_TERM_MASK \ ++ (0x7F << ISPCSI2PHY_CFG1_TCLK_TERM_SHIFT) ++#define ISPCSI2PHY_CFG1_TCLK_TERM__RESETVAL \ ++ (0x00 << ISPCSI2PHY_CFG1_TCLK_TERM_SHIFT) ++#define ISPCSI2PHY_CFG1_RESERVED1_SHIFT 10 ++#define ISPCSI2PHY_CFG1_RESERVED1_MASK \ ++ (0xFF << ISPCSI2PHY_CFG1_RESERVED1_SHIFT) ++#define ISPCSI2PHY_CFG1_RESERVED1__RESETVAL \ ++ (0xB8 << ISPCSI2PHY_CFG1_RESERVED1_SHIFT) ++#define ISPCSI2PHY_CFG1_TCLK_MISS_SHIFT 8 ++#define ISPCSI2PHY_CFG1_TCLK_MISS_MASK \ ++ (0x3 << ISPCSI2PHY_CFG1_TCLK_MISS_SHIFT) ++#define ISPCSI2PHY_CFG1_TCLK_MISS__RESETVAL \ ++ (0x1 << ISPCSI2PHY_CFG1_TCLK_MISS_SHIFT) ++#define ISPCSI2PHY_CFG1_TCLK_SETTLE_SHIFT 0 ++#define ISPCSI2PHY_CFG1_TCLK_SETTLE_MASK \ ++ (0xFF << ISPCSI2PHY_CFG1_TCLK_TERM_SHIFT) ++#define ISPCSI2PHY_CFG1_TCLK_SETTLE__RESETVAL \ ++ (0x0E << ISPCSI2PHY_CFG1_TCLK_TERM_SHIFT) ++#define ISPCSI2PHY_CFG1__RESETVAL (ISPCSI2PHY_CFG1_TCLK_TERM__RESETVAL | \ ++ ISPCSI2PHY_CFG1_RESERVED1__RESETVAL | \ ++ ISPCSI2PHY_CFG1_TCLK_MISS__RESETVAL | \ ++ ISPCSI2PHY_CFG1_TCLK_SETTLE__RESETVAL) ++#define ISPCSI2PHY_CFG1__EDITABLE_MASK (ISPCSI2PHY_CFG1_TCLK_TERM_MASK | \ ++ ISPCSI2PHY_CFG1_RESERVED1_MASK | \ ++ ISPCSI2PHY_CFG1_TCLK_MISS_MASK | \ ++ ISPCSI2PHY_CFG1_TCLK_SETTLE_MASK) ++ ++#endif /* __ISPREG_H__ */ +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0002-omap3isp-Add-ISP-MMU-wrapper.patch b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0002-omap3isp-Add-ISP-MMU-wrapper.patch new file mode 100644 index 000000000..cfca26723 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0002-omap3isp-Add-ISP-MMU-wrapper.patch @@ -0,0 +1,209 @@ +From 731527a7dc26533a878c7c5f36fc148fdcaa21b8 Mon Sep 17 00:00:00 2001 +From: Sakari Ailus +Date: Tue, 10 Mar 2009 10:49:02 +0200 +Subject: [PATCH] omap3isp: Add ISP MMU wrapper + +TODO: + +- The ISP driver should start using the IOMMU directly without this wrapper. + +Signed-off-by: Sakari Ailus +--- + drivers/media/video/isp/ispmmu.c | 141 ++++++++++++++++++++++++++++++++++++++ + drivers/media/video/isp/ispmmu.h | 36 ++++++++++ + 2 files changed, 177 insertions(+), 0 deletions(-) + create mode 100644 drivers/media/video/isp/ispmmu.c + create mode 100644 drivers/media/video/isp/ispmmu.h + +diff --git a/drivers/media/video/isp/ispmmu.c b/drivers/media/video/isp/ispmmu.c +new file mode 100644 +index 0000000..f872c71 +--- /dev/null ++++ b/drivers/media/video/isp/ispmmu.c +@@ -0,0 +1,141 @@ ++/* ++ * omap iommu wrapper for TI's OMAP3430 Camera ISP ++ * ++ * Copyright (C) 2008--2009 Nokia. ++ * ++ * Contributors: ++ * Hiroshi Doyu ++ * Sakari Ailus ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#include ++ ++#include "ispmmu.h" ++#include "isp.h" ++ ++#include ++#include ++ ++#define IOMMU_FLAG (IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_8) ++ ++static struct iommu *isp_iommu; ++ ++dma_addr_t ispmmu_vmalloc(size_t bytes) ++{ ++ return (dma_addr_t)iommu_vmalloc(isp_iommu, 0, bytes, IOMMU_FLAG); ++} ++ ++void ispmmu_vfree(const dma_addr_t da) ++{ ++ iommu_vfree(isp_iommu, (u32)da); ++} ++ ++dma_addr_t ispmmu_kmap(u32 pa, int size) ++{ ++ void *da; ++ ++ da = (void *)iommu_kmap(isp_iommu, 0, pa, size, IOMMU_FLAG); ++ if (IS_ERR(da)) ++ return PTR_ERR(da); ++ ++ return (dma_addr_t)da; ++} ++ ++void ispmmu_kunmap(dma_addr_t da) ++{ ++ iommu_kunmap(isp_iommu, (u32)da); ++} ++ ++dma_addr_t ispmmu_vmap(const struct scatterlist *sglist, ++ int sglen) ++{ ++ int err; ++ void *da; ++ struct sg_table *sgt; ++ unsigned int i; ++ struct scatterlist *sg, *src = (struct scatterlist *)sglist; ++ ++ /* ++ * convert isp sglist to iommu sgt ++ * FIXME: should be fixed in the upper layer? ++ */ ++ sgt = kmalloc(sizeof(*sgt), GFP_KERNEL); ++ if (!sgt) ++ return -ENOMEM; ++ err = sg_alloc_table(sgt, sglen, GFP_KERNEL); ++ if (err) ++ goto err_sg_alloc; ++ ++ for_each_sg(sgt->sgl, sg, sgt->nents, i) ++ sg_set_buf(sg, phys_to_virt(sg_dma_address(src + i)), ++ sg_dma_len(src + i)); ++ ++ da = (void *)iommu_vmap(isp_iommu, 0, sgt, IOMMU_FLAG); ++ if (IS_ERR(da)) ++ goto err_vmap; ++ ++ return (dma_addr_t)da; ++ ++err_vmap: ++ sg_free_table(sgt); ++err_sg_alloc: ++ kfree(sgt); ++ return -ENOMEM; ++} ++EXPORT_SYMBOL_GPL(ispmmu_vmap); ++ ++void ispmmu_vunmap(dma_addr_t da) ++{ ++ struct sg_table *sgt; ++ ++ sgt = iommu_vunmap(isp_iommu, (u32)da); ++ if (!sgt) ++ return; ++ sg_free_table(sgt); ++ kfree(sgt); ++} ++EXPORT_SYMBOL_GPL(ispmmu_vunmap); ++ ++void ispmmu_save_context(void) ++{ ++ if (isp_iommu) ++ iommu_save_ctx(isp_iommu); ++} ++ ++void ispmmu_restore_context(void) ++{ ++ if (isp_iommu) ++ iommu_restore_ctx(isp_iommu); ++} ++ ++int __init ispmmu_init(void) ++{ ++ int err = 0; ++ ++ isp_get(); ++ isp_iommu = iommu_get("isp"); ++ if (IS_ERR(isp_iommu)) { ++ err = PTR_ERR(isp_iommu); ++ isp_iommu = NULL; ++ } ++ isp_put(); ++ ++ return err; ++} ++ ++void ispmmu_cleanup(void) ++{ ++ isp_get(); ++ if (isp_iommu) ++ iommu_put(isp_iommu); ++ isp_put(); ++ isp_iommu = NULL; ++} +diff --git a/drivers/media/video/isp/ispmmu.h b/drivers/media/video/isp/ispmmu.h +new file mode 100644 +index 0000000..0bc5bcb +--- /dev/null ++++ b/drivers/media/video/isp/ispmmu.h +@@ -0,0 +1,36 @@ ++/* ++ * omap iommu wrapper for TI's OMAP3430 Camera ISP ++ * ++ * Copyright (C) 2008--2009 Nokia. ++ * ++ * Contributors: ++ * Hiroshi Doyu ++ * Sakari Ailus ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#ifndef OMAP_ISP_MMU_H ++#define OMAP_ISP_MMU_H ++ ++#include ++#include ++ ++dma_addr_t ispmmu_vmalloc(size_t bytes); ++void ispmmu_vfree(const dma_addr_t da); ++dma_addr_t ispmmu_kmap(u32 pa, int size); ++void ispmmu_kunmap(dma_addr_t da); ++dma_addr_t ispmmu_vmap(const struct scatterlist *sglist, int sglen); ++void ispmmu_vunmap(dma_addr_t da); ++void ispmmu_save_context(void); ++void ispmmu_restore_context(void); ++int ispmmu_init(void); ++void ispmmu_cleanup(void); ++ ++#endif /* OMAP_ISP_MMU_H */ +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0003-omap3isp-Add-userspace-header.patch b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0003-omap3isp-Add-userspace-header.patch new file mode 100644 index 000000000..66c171f54 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0003-omap3isp-Add-userspace-header.patch @@ -0,0 +1,696 @@ +From 98ca1ef8c6e2561989aeef981131cf5077eab1d1 Mon Sep 17 00:00:00 2001 +From: Sakari Ailus +Date: Tue, 10 Mar 2009 10:49:02 +0200 +Subject: [PATCH] omap3isp: Add userspace header + +Signed-off-by: Sakari Ailus +--- + arch/arm/plat-omap/include/mach/isp_user.h | 676 ++++++++++++++++++++++++++++ + 1 files changed, 676 insertions(+), 0 deletions(-) + create mode 100644 arch/arm/plat-omap/include/mach/isp_user.h + +diff --git a/arch/arm/plat-omap/include/mach/isp_user.h b/arch/arm/plat-omap/include/mach/isp_user.h +new file mode 100644 +index 0000000..b819e26 +--- /dev/null ++++ b/arch/arm/plat-omap/include/mach/isp_user.h +@@ -0,0 +1,676 @@ ++/* ++ * isp_user.h ++ * ++ * Include file for OMAP ISP module in TI's OMAP3. ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * Contributors: ++ * Mohit Jalori ++ * Sergio Aguirre ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#ifndef OMAP_ISP_USER_H ++#define OMAP_ISP_USER_H ++ ++/* ISP Private IOCTLs */ ++#define VIDIOC_PRIVATE_ISP_CCDC_CFG \ ++ _IOWR('V', BASE_VIDIOC_PRIVATE + 1, struct ispccdc_update_config) ++#define VIDIOC_PRIVATE_ISP_PRV_CFG \ ++ _IOWR('V', BASE_VIDIOC_PRIVATE + 2, struct ispprv_update_config) ++#define VIDIOC_PRIVATE_ISP_AEWB_CFG \ ++ _IOWR('V', BASE_VIDIOC_PRIVATE + 4, struct isph3a_aewb_config) ++#define VIDIOC_PRIVATE_ISP_AEWB_REQ \ ++ _IOWR('V', BASE_VIDIOC_PRIVATE + 5, struct isph3a_aewb_data) ++#define VIDIOC_PRIVATE_ISP_HIST_CFG \ ++ _IOWR('V', BASE_VIDIOC_PRIVATE + 6, struct isp_hist_config) ++#define VIDIOC_PRIVATE_ISP_HIST_REQ \ ++ _IOWR('V', BASE_VIDIOC_PRIVATE + 7, struct isp_hist_data) ++#define VIDIOC_PRIVATE_ISP_AF_CFG \ ++ _IOWR('V', BASE_VIDIOC_PRIVATE + 8, struct af_configuration) ++#define VIDIOC_PRIVATE_ISP_AF_REQ \ ++ _IOWR('V', BASE_VIDIOC_PRIVATE + 9, struct isp_af_data) ++ ++/* AE/AWB related structures and flags*/ ++ ++/* Flags for update field */ ++#define REQUEST_STATISTICS (1 << 0) ++#define SET_COLOR_GAINS (1 << 1) ++#define SET_DIGITAL_GAIN (1 << 2) ++#define SET_EXPOSURE (1 << 3) ++#define SET_ANALOG_GAIN (1 << 4) ++ ++#define MAX_FRAME_COUNT 0x0FFF ++#define MAX_FUTURE_FRAMES 10 ++ ++#define MAX_SATURATION_LIM 1023 ++#define MIN_WIN_H 2 ++#define MAX_WIN_H 256 ++#define MIN_WIN_W 6 ++#define MAX_WIN_W 256 ++#define MAX_WINVC 128 ++#define MAX_WINHC 36 ++#define MAX_WINSTART 4095 ++#define MIN_SUB_INC 2 ++#define MAX_SUB_INC 32 ++ ++/* Range Constants */ ++#define AF_IIRSH_MIN 0 ++#define AF_IIRSH_MAX 4094 ++#define AF_PAXEL_HORIZONTAL_COUNT_MIN 0 ++#define AF_PAXEL_HORIZONTAL_COUNT_MAX 35 ++#define AF_PAXEL_VERTICAL_COUNT_MIN 0 ++#define AF_PAXEL_VERTICAL_COUNT_MAX 127 ++#define AF_PAXEL_INCREMENT_MIN 0 ++#define AF_PAXEL_INCREMENT_MAX 14 ++#define AF_PAXEL_HEIGHT_MIN 0 ++#define AF_PAXEL_HEIGHT_MAX 127 ++#define AF_PAXEL_WIDTH_MIN 0 ++#define AF_PAXEL_WIDTH_MAX 127 ++#define AF_PAXEL_HZSTART_MIN 2 ++#define AF_PAXEL_HZSTART_MAX 4094 ++ ++#define AF_PAXEL_VTSTART_MIN 0 ++#define AF_PAXEL_VTSTART_MAX 4095 ++#define AF_THRESHOLD_MAX 255 ++#define AF_COEF_MAX 4095 ++#define AF_PAXEL_SIZE 48 ++ ++/** ++ * struct isph3a_aewb_config - AE AWB configuration reset values. ++ * saturation_limit: Saturation limit. ++ * @win_height: Window Height. Range 2 - 256, even values only. ++ * @win_width: Window Width. Range 6 - 256, even values only. ++ * @ver_win_count: Vertical Window Count. Range 1 - 128. ++ * @hor_win_count: Horizontal Window Count. Range 1 - 36. ++ * @ver_win_start: Vertical Window Start. Range 0 - 4095. ++ * @hor_win_start: Horizontal Window Start. Range 0 - 4095. ++ * @blk_ver_win_start: Black Vertical Windows Start. Range 0 - 4095. ++ * @blk_win_height: Black Window Height. Range 2 - 256, even values only. ++ * @subsample_ver_inc: Subsample Vertical points increment Range 2 - 32, even ++ * values only. ++ * @subsample_hor_inc: Subsample Horizontal points increment Range 2 - 32, even ++ * values only. ++ * @alaw_enable: AEW ALAW EN flag. ++ * @aewb_enable: AE AWB stats generation EN flag. ++ */ ++struct isph3a_aewb_config { ++ __u16 saturation_limit; ++ __u16 win_height; ++ __u16 win_width; ++ __u16 ver_win_count; ++ __u16 hor_win_count; ++ __u16 ver_win_start; ++ __u16 hor_win_start; ++ __u16 blk_ver_win_start; ++ __u16 blk_win_height; ++ __u16 subsample_ver_inc; ++ __u16 subsample_hor_inc; ++ __u8 alaw_enable; ++ __u8 aewb_enable; ++}; ++ ++/** ++ * struct isph3a_aewb_data - Structure of data sent to or received from user ++ * @h3a_aewb_statistics_buf: Pointer to pass to user. ++ * @shutter: Shutter speed. ++ * @gain: Sensor analog Gain. ++ * @shutter_cap: Shutter speed for capture. ++ * @gain_cap: Sensor Gain for capture. ++ * @dgain: White balance digital gain. ++ * @wb_gain_b: White balance color gain blue. ++ * @wb_gain_r: White balance color gain red. ++ * @wb_gain_gb: White balance color gain green blue. ++ * @wb_gain_gr: White balance color gain green red. ++ * @frame_number: Frame number of requested stats. ++ * @curr_frame: Current frame number being processed. ++ * @update: Bitwise flags to update parameters. ++ * @ts: Timestamp of returned framestats. ++ * @field_count: Sequence number of returned framestats. ++ */ ++struct isph3a_aewb_data { ++ void *h3a_aewb_statistics_buf; ++ __u32 shutter; ++ __u16 gain; ++ __u32 shutter_cap; ++ __u16 gain_cap; ++ __u16 dgain; ++ __u16 wb_gain_b; ++ __u16 wb_gain_r; ++ __u16 wb_gain_gb; ++ __u16 wb_gain_gr; ++ __u16 frame_number; ++ __u16 curr_frame; ++ __u8 update; ++ struct timeval ts; ++ __u32 config_counter; ++ unsigned long field_count; ++}; ++ ++ ++/* Histogram related structs */ ++/* Flags for number of bins */ ++#define BINS_32 0x0 ++#define BINS_64 0x1 ++#define BINS_128 0x2 ++#define BINS_256 0x3 ++ ++struct isp_hist_config { ++ __u8 hist_source; /* CCDC or Memory */ ++ __u8 input_bit_width; /* Needed o know the size per pixel */ ++ __u8 hist_frames; /* Num of frames to be processed and ++ * accumulated ++ */ ++ __u8 hist_h_v_info; /* frame-input width and height if source is ++ * memory ++ */ ++ __u16 hist_radd; /* frame-input address in memory */ ++ __u16 hist_radd_off; /* line-offset for frame-input */ ++ __u16 hist_bins; /* number of bins: 32, 64, 128, or 256 */ ++ __u16 wb_gain_R; /* White Balance Field-to-Pattern Assignments */ ++ __u16 wb_gain_RG; /* White Balance Field-to-Pattern Assignments */ ++ __u16 wb_gain_B; /* White Balance Field-to-Pattern Assignments */ ++ __u16 wb_gain_BG; /* White Balance Field-to-Pattern Assignments */ ++ __u8 num_regions; /* number of regions to be configured */ ++ __u16 reg0_hor; /* Region 0 size and position */ ++ __u16 reg0_ver; /* Region 0 size and position */ ++ __u16 reg1_hor; /* Region 1 size and position */ ++ __u16 reg1_ver; /* Region 1 size and position */ ++ __u16 reg2_hor; /* Region 2 size and position */ ++ __u16 reg2_ver; /* Region 2 size and position */ ++ __u16 reg3_hor; /* Region 3 size and position */ ++ __u16 reg3_ver; /* Region 3 size and position */ ++}; ++ ++struct isp_hist_data { ++ __u32 *hist_statistics_buf; /* Pointer to pass to user */ ++}; ++ ++/* Auto Focus related structs */ ++ ++#define AF_NUMBER_OF_COEF 11 ++ ++/* Flags for update field */ ++#define REQUEST_STATISTICS (1 << 0) ++#define LENS_DESIRED_POSITION (1 << 1) ++#define LENS_CURRENT_POSITION (1 << 2) ++ ++/** ++ * struct isp_af_xtrastats - Extra statistics related to AF generated stats. ++ * @ts: Timestamp when the frame gets delivered to the user. ++ * @field_count: Field count of the frame delivered to the user. ++ * @lens_position: Lens position when the stats are being generated. ++ */ ++struct isp_af_xtrastats { ++ struct timeval ts; ++ unsigned long field_count; ++ __u16 lens_position; /* deprecated */ ++}; ++ ++/** ++ * struct isp_af_data - AF statistics data to transfer between driver and user. ++ * @af_statistics_buf: Pointer to pass to user. ++ * @lens_current_position: Read value of lens absolute position. ++ * @desired_lens_direction: Lens desired location. ++ * @update: Bitwise flags to update parameters. ++ * @frame_number: Data for which frame is desired/given. ++ * @curr_frame: Current frame number being processed by AF module. ++ * @xtrastats: Extra statistics structure. ++ */ ++struct isp_af_data { ++ void *af_statistics_buf; ++ __u16 lens_current_position; /* deprecated */ ++ __u16 desired_lens_direction; /* deprecated */ ++ __u16 update; ++ __u16 frame_number; ++ __u16 curr_frame; ++ __u32 config_counter; ++ struct isp_af_xtrastats xtrastats; ++}; ++ ++/* enum used for status of specific feature */ ++enum af_alaw_enable { ++ H3A_AF_ALAW_DISABLE = 0, ++ H3A_AF_ALAW_ENABLE = 1 ++}; ++ ++enum af_hmf_enable { ++ H3A_AF_HMF_DISABLE = 0, ++ H3A_AF_HMF_ENABLE = 1 ++}; ++ ++enum af_config_flag { ++ H3A_AF_CFG_DISABLE = 0, ++ H3A_AF_CFG_ENABLE = 1 ++}; ++ ++enum af_mode { ++ ACCUMULATOR_SUMMED = 0, ++ ACCUMULATOR_PEAK = 1 ++}; ++ ++/* Red, Green, and blue pixel location in the AF windows */ ++enum rgbpos { ++ GR_GB_BAYER = 0, /* GR and GB as Bayer pattern */ ++ RG_GB_BAYER = 1, /* RG and GB as Bayer pattern */ ++ GR_BG_BAYER = 2, /* GR and BG as Bayer pattern */ ++ RG_BG_BAYER = 3, /* RG and BG as Bayer pattern */ ++ GG_RB_CUSTOM = 4, /* GG and RB as custom pattern */ ++ RB_GG_CUSTOM = 5 /* RB and GG as custom pattern */ ++}; ++ ++/* Contains the information regarding the Horizontal Median Filter */ ++struct af_hmf { ++ enum af_hmf_enable enable; /* Status of Horizontal Median Filter */ ++ unsigned int threshold; /* Threshhold Value for Horizontal Median ++ * Filter ++ */ ++}; ++ ++/* Contains the information regarding the IIR Filters */ ++struct af_iir { ++ unsigned int hz_start_pos; /* IIR Start Register Value */ ++ int coeff_set0[AF_NUMBER_OF_COEF]; /* ++ * IIR Filter Coefficient for ++ * Set 0 ++ */ ++ int coeff_set1[AF_NUMBER_OF_COEF]; /* ++ * IIR Filter Coefficient for ++ * Set 1 ++ */ ++}; ++ ++/* Contains the information regarding the Paxels Structure in AF Engine */ ++struct af_paxel { ++ unsigned int width; /* Width of the Paxel */ ++ unsigned int height; /* Height of the Paxel */ ++ unsigned int hz_start; /* Horizontal Start Position */ ++ unsigned int vt_start; /* Vertical Start Position */ ++ unsigned int hz_cnt; /* Horizontal Count */ ++ unsigned int vt_cnt; /* vertical Count */ ++ unsigned int line_incr; /* Line Increment */ ++}; ++/* Contains the parameters required for hardware set up of AF Engine */ ++struct af_configuration { ++ enum af_alaw_enable alaw_enable; /*ALWAW status */ ++ struct af_hmf hmf_config; /*HMF configurations */ ++ enum rgbpos rgb_pos; /*RGB Positions */ ++ struct af_iir iir_config; /*IIR filter configurations */ ++ struct af_paxel paxel_config; /*Paxel parameters */ ++ enum af_mode mode; /*Accumulator mode */ ++ enum af_config_flag af_config; /*Flag indicates Engine is configured */ ++}; ++ ++/* ISP CCDC structs */ ++ ++/* Abstraction layer CCDC configurations */ ++#define ISP_ABS_CCDC_ALAW (1 << 0) ++#define ISP_ABS_CCDC_LPF (1 << 1) ++#define ISP_ABS_CCDC_BLCLAMP (1 << 2) ++#define ISP_ABS_CCDC_BCOMP (1 << 3) ++#define ISP_ABS_CCDC_FPC (1 << 4) ++#define ISP_ABS_CCDC_CULL (1 << 5) ++#define ISP_ABS_CCDC_COLPTN (1 << 6) ++#define ISP_ABS_CCDC_CONFIG_LSC (1 << 7) ++#define ISP_ABS_TBL_LSC (1 << 8) ++ ++#define RGB_MAX 3 ++ ++/* Enumeration constants for Alaw input width */ ++enum alaw_ipwidth { ++ ALAW_BIT12_3 = 0x3, ++ ALAW_BIT11_2 = 0x4, ++ ALAW_BIT10_1 = 0x5, ++ ALAW_BIT9_0 = 0x6 ++}; ++ ++/* Enumeration constants for Video Port */ ++enum vpin { ++ BIT12_3 = 3, ++ BIT11_2 = 4, ++ BIT10_1 = 5, ++ BIT9_0 = 6 ++}; ++ ++enum vpif_freq { ++ PIXCLKBY2, ++ PIXCLKBY3_5, ++ PIXCLKBY4_5, ++ PIXCLKBY5_5, ++ PIXCLKBY6_5 ++}; ++ ++/** ++ * struct ispccdc_lsc_config - Structure for LSC configuration. ++ * @offset: Table Offset of the gain table. ++ * @gain_mode_n: Vertical dimension of a paxel in LSC configuration. ++ * @gain_mode_m: Horizontal dimension of a paxel in LSC configuration. ++ * @gain_format: Gain table format. ++ * @fmtsph: Start pixel horizontal from start of the HS sync pulse. ++ * @fmtlnh: Number of pixels in horizontal direction to use for the data ++ * reformatter. ++ * @fmtslv: Start line from start of VS sync pulse for the data reformatter. ++ * @fmtlnv: Number of lines in vertical direction for the data reformatter. ++ * @initial_x: X position, in pixels, of the first active pixel in reference ++ * to the first active paxel. Must be an even number. ++ * @initial_y: Y position, in pixels, of the first active pixel in reference ++ * to the first active paxel. Must be an even number. ++ * @size: Size of LSC gain table. Filled when loaded from userspace. ++ */ ++struct ispccdc_lsc_config { ++ __u16 offset; ++ __u8 gain_mode_n; ++ __u8 gain_mode_m; ++ __u8 gain_format; ++ __u16 fmtsph; ++ __u16 fmtlnh; ++ __u16 fmtslv; ++ __u16 fmtlnv; ++ __u8 initial_x; ++ __u8 initial_y; ++ __u32 size; ++}; ++ ++/** ++ * struct ispccdc_bclamp - Structure for Optical & Digital black clamp subtract ++ * @obgain: Optical black average gain. ++ * @obstpixel: Start Pixel w.r.t. HS pulse in Optical black sample. ++ * @oblines: Optical Black Sample lines. ++ * @oblen: Optical Black Sample Length. ++ * @dcsubval: Digital Black Clamp subtract value. ++ */ ++struct ispccdc_bclamp { ++ __u8 obgain; ++ __u8 obstpixel; ++ __u8 oblines; ++ __u8 oblen; ++ __u16 dcsubval; ++}; ++ ++/** ++ * ispccdc_fpc - Structure for FPC ++ * @fpnum: Number of faulty pixels to be corrected in the frame. ++ * @fpcaddr: Memory address of the FPC Table ++ */ ++struct ispccdc_fpc { ++ __u16 fpnum; ++ __u32 fpcaddr; ++}; ++ ++/** ++ * ispccdc_blcomp - Structure for Black Level Compensation parameters. ++ * @b_mg: B/Mg pixels. 2's complement. -128 to +127. ++ * @gb_g: Gb/G pixels. 2's complement. -128 to +127. ++ * @gr_cy: Gr/Cy pixels. 2's complement. -128 to +127. ++ * @r_ye: R/Ye pixels. 2's complement. -128 to +127. ++ */ ++struct ispccdc_blcomp { ++ __u8 b_mg; ++ __u8 gb_g; ++ __u8 gr_cy; ++ __u8 r_ye; ++}; ++ ++/** ++ * struct ispccdc_vp - Structure for Video Port parameters ++ * @bitshift_sel: Video port input select. 3 - bits 12-3, 4 - bits 11-2, ++ * 5 - bits 10-1, 6 - bits 9-0. ++ * @freq_sel: Video port data ready frequency. 1 - 1/3.5, 2 - 1/4.5, ++ * 3 - 1/5.5, 4 - 1/6.5. ++ */ ++struct ispccdc_vp { ++ enum vpin bitshift_sel; ++ enum vpif_freq freq_sel; ++}; ++ ++/** ++ * ispccdc_culling - Structure for Culling parameters. ++ * @v_pattern: Vertical culling pattern. ++ * @h_odd: Horizontal Culling pattern for odd lines. ++ * @h_even: Horizontal Culling pattern for even lines. ++ */ ++struct ispccdc_culling { ++ __u8 v_pattern; ++ __u16 h_odd; ++ __u16 h_even; ++}; ++ ++/** ++ * ispccdc_update_config - Structure for CCDC configuration. ++ * @update: Specifies which CCDC registers should be updated. ++ * @flag: Specifies which CCDC functions should be enabled. ++ * @alawip: Enable/Disable A-Law compression. ++ * @bclamp: Black clamp control register. ++ * @blcomp: Black level compensation value for RGrGbB Pixels. 2's complement. ++ * @fpc: Number of faulty pixels corrected in the frame, address of FPC table. ++ * @cull: Cull control register. ++ * @colptn: Color pattern of the sensor. ++ * @lsc: Pointer to LSC gain table. ++ */ ++struct ispccdc_update_config { ++ __u16 update; ++ __u16 flag; ++ enum alaw_ipwidth alawip; ++ struct ispccdc_bclamp *bclamp; ++ struct ispccdc_blcomp *blcomp; ++ struct ispccdc_fpc *fpc; ++ struct ispccdc_lsc_config *lsc_cfg; ++ struct ispccdc_culling *cull; ++ __u32 colptn; ++ __u8 *lsc; ++}; ++ ++/* Preview configuration */ ++ ++/*Abstraction layer preview configurations*/ ++#define ISP_ABS_PREV_LUMAENH (1 << 0) ++#define ISP_ABS_PREV_INVALAW (1 << 1) ++#define ISP_ABS_PREV_HRZ_MED (1 << 2) ++#define ISP_ABS_PREV_CFA (1 << 3) ++#define ISP_ABS_PREV_CHROMA_SUPP (1 << 4) ++#define ISP_ABS_PREV_WB (1 << 5) ++#define ISP_ABS_PREV_BLKADJ (1 << 6) ++#define ISP_ABS_PREV_RGB2RGB (1 << 7) ++#define ISP_ABS_PREV_COLOR_CONV (1 << 8) ++#define ISP_ABS_PREV_YC_LIMIT (1 << 9) ++#define ISP_ABS_PREV_DEFECT_COR (1 << 10) ++#define ISP_ABS_PREV_GAMMABYPASS (1 << 11) ++#define ISP_ABS_TBL_NF (1 << 12) ++#define ISP_ABS_TBL_REDGAMMA (1 << 13) ++#define ISP_ABS_TBL_GREENGAMMA (1 << 14) ++#define ISP_ABS_TBL_BLUEGAMMA (1 << 15) ++ ++#define ISPPRV_NF_TBL_SIZE 64 ++#define ISPPRV_CFA_TBL_SIZE 576 ++#define ISPPRV_GAMMA_TBL_SIZE 1024 ++#define ISPPRV_YENH_TBL_SIZE 128 ++ ++/** ++ * struct ispprev_hmed - Structure for Horizontal Median Filter. ++ * @odddist: Distance between consecutive pixels of same color in the odd line. ++ * @evendist: Distance between consecutive pixels of same color in the even ++ * line. ++ * @thres: Horizontal median filter threshold. ++ */ ++struct ispprev_hmed { ++ __u8 odddist; ++ __u8 evendist; ++ __u8 thres; ++}; ++ ++/* ++ * Enumeration for CFA Formats supported by preview ++ */ ++enum cfa_fmt { ++ CFAFMT_BAYER, CFAFMT_SONYVGA, CFAFMT_RGBFOVEON, ++ CFAFMT_DNSPL, CFAFMT_HONEYCOMB, CFAFMT_RRGGBBFOVEON ++}; ++ ++/** ++ * struct ispprev_cfa - Structure for CFA Inpterpolation. ++ * @cfafmt: CFA Format Enum value supported by preview. ++ * @cfa_gradthrs_vert: CFA Gradient Threshold - Vertical. ++ * @cfa_gradthrs_horz: CFA Gradient Threshold - Horizontal. ++ * @cfa_table: Pointer to the CFA table. ++ */ ++struct ispprev_cfa { ++ enum cfa_fmt cfafmt; ++ __u8 cfa_gradthrs_vert; ++ __u8 cfa_gradthrs_horz; ++ __u32 *cfa_table; ++}; ++ ++/** ++ * struct ispprev_csup - Structure for Chrominance Suppression. ++ * @gain: Gain. ++ * @thres: Threshold. ++ * @hypf_en: Flag to enable/disable the High Pass Filter. ++ */ ++struct ispprev_csup { ++ __u8 gain; ++ __u8 thres; ++ __u8 hypf_en; ++}; ++ ++/** ++ * struct ispprev_wbal - Structure for White Balance. ++ * @dgain: Digital gain (U10Q8). ++ * @coef3: White balance gain - COEF 3 (U8Q5). ++ * @coef2: White balance gain - COEF 2 (U8Q5). ++ * @coef1: White balance gain - COEF 1 (U8Q5). ++ * @coef0: White balance gain - COEF 0 (U8Q5). ++ */ ++struct ispprev_wbal { ++ __u16 dgain; ++ __u8 coef3; ++ __u8 coef2; ++ __u8 coef1; ++ __u8 coef0; ++}; ++ ++/** ++ * struct ispprev_blkadj - Structure for Black Adjustment. ++ * @red: Black level offset adjustment for Red in 2's complement format ++ * @green: Black level offset adjustment for Green in 2's complement format ++ * @blue: Black level offset adjustment for Blue in 2's complement format ++ */ ++struct ispprev_blkadj { ++ /*Black level offset adjustment for Red in 2's complement format */ ++ __u8 red; ++ /*Black level offset adjustment for Green in 2's complement format */ ++ __u8 green; ++ /* Black level offset adjustment for Blue in 2's complement format */ ++ __u8 blue; ++}; ++ ++/** ++ * struct ispprev_rgbtorgb - Structure for RGB to RGB Blending. ++ * @matrix: Blending values(S12Q8 format) ++ * [RR] [GR] [BR] ++ * [RG] [GG] [BG] ++ * [RB] [GB] [BB] ++ * @offset: Blending offset value for R,G,B in 2's complement integer format. ++ */ ++struct ispprev_rgbtorgb { ++ __u16 matrix[3][3]; ++ __u16 offset[3]; ++}; ++ ++/** ++ * struct ispprev_csc - Structure for Color Space Conversion from RGB-YCbYCr ++ * @matrix: Color space conversion coefficients(S10Q8) ++ * [CSCRY] [CSCGY] [CSCBY] ++ * [CSCRCB] [CSCGCB] [CSCBCB] ++ * [CSCRCR] [CSCGCR] [CSCBCR] ++ * @offset: CSC offset values for Y offset, CB offset and CR offset respectively ++ */ ++struct ispprev_csc { ++ __u16 matrix[RGB_MAX][RGB_MAX]; ++ __s16 offset[RGB_MAX]; ++}; ++ ++/** ++ * struct ispprev_yclimit - Structure for Y, C Value Limit. ++ * @minC: Minimum C value ++ * @maxC: Maximum C value ++ * @minY: Minimum Y value ++ * @maxY: Maximum Y value ++ */ ++struct ispprev_yclimit { ++ __u8 minC; ++ __u8 maxC; ++ __u8 minY; ++ __u8 maxY; ++}; ++ ++/** ++ * struct ispprev_dcor - Structure for Defect correction. ++ * @couplet_mode_en: Flag to enable or disable the couplet dc Correction in NF ++ * @detect_correct: Thresholds for correction bit 0:10 detect 16:25 correct ++ */ ++struct ispprev_dcor { ++ __u8 couplet_mode_en; ++ __u32 detect_correct[4]; ++}; ++ ++/** ++ * struct ispprev_nf - Structure for Noise Filter ++ * @spread: Spread value to be used in Noise Filter ++ * @table: Pointer to the Noise Filter table ++ */ ++struct ispprev_nf { ++ __u8 spread; ++ __u32 table[ISPPRV_NF_TBL_SIZE]; ++}; ++ ++/** ++ * struct ispprv_update_config - Structure for Preview Configuration (user). ++ * @update: Specifies which ISP Preview registers should be updated. ++ * @flag: Specifies which ISP Preview functions should be enabled. ++ * @yen: Pointer to luma enhancement table. ++ * @shading_shift: 3bit value of shift used in shading compensation. ++ * @prev_hmed: Pointer to structure containing the odd and even distance. ++ * between the pixels in the image along with the filter threshold. ++ * @prev_cfa: Pointer to structure containing the CFA interpolation table, CFA. ++ * format in the image, vertical and horizontal gradient threshold. ++ * @csup: Pointer to Structure for Chrominance Suppression coefficients. ++ * @prev_wbal: Pointer to structure for White Balance. ++ * @prev_blkadj: Pointer to structure for Black Adjustment. ++ * @rgb2rgb: Pointer to structure for RGB to RGB Blending. ++ * @prev_csc: Pointer to structure for Color Space Conversion from RGB-YCbYCr. ++ * @yclimit: Pointer to structure for Y, C Value Limit. ++ * @prev_dcor: Pointer to structure for defect correction. ++ * @prev_nf: Pointer to structure for Noise Filter ++ * @red_gamma: Pointer to red gamma correction table. ++ * @green_gamma: Pointer to green gamma correction table. ++ * @blue_gamma: Pointer to blue gamma correction table. ++ */ ++struct ispprv_update_config { ++ __u16 update; ++ __u16 flag; ++ void *yen; ++ __u32 shading_shift; ++ struct ispprev_hmed *prev_hmed; ++ struct ispprev_cfa *prev_cfa; ++ struct ispprev_csup *csup; ++ struct ispprev_wbal *prev_wbal; ++ struct ispprev_blkadj *prev_blkadj; ++ struct ispprev_rgbtorgb *rgb2rgb; ++ struct ispprev_csc *prev_csc; ++ struct ispprev_yclimit *yclimit; ++ struct ispprev_dcor *prev_dcor; ++ struct ispprev_nf *prev_nf; ++ __u32 *red_gamma; ++ __u32 *green_gamma; ++ __u32 *blue_gamma; ++}; ++ ++#endif /* OMAP_ISP_USER_H */ +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0004-omap3isp-Add-ISP-frontend-CCDC.patch b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0004-omap3isp-Add-ISP-frontend-CCDC.patch new file mode 100644 index 000000000..4a161729f --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0004-omap3isp-Add-ISP-frontend-CCDC.patch @@ -0,0 +1,1875 @@ +From 9ea796fe5383a6961125a6a18185a901fe8627d7 Mon Sep 17 00:00:00 2001 +From: Sakari Ailus +Date: Tue, 10 Mar 2009 10:49:02 +0200 +Subject: [PATCH] omap3isp: Add ISP frontend (CCDC) + +Signed-off-by: Sakari Ailus +--- + drivers/media/video/isp/ispccdc.c | 1638 +++++++++++++++++++++++++++++++++++++ + drivers/media/video/isp/ispccdc.h | 209 +++++ + 2 files changed, 1847 insertions(+), 0 deletions(-) + create mode 100644 drivers/media/video/isp/ispccdc.c + create mode 100644 drivers/media/video/isp/ispccdc.h + +diff --git a/drivers/media/video/isp/ispccdc.c b/drivers/media/video/isp/ispccdc.c +new file mode 100644 +index 0000000..2574ea2 +--- /dev/null ++++ b/drivers/media/video/isp/ispccdc.c +@@ -0,0 +1,1638 @@ ++/* ++ * ispccdc.c ++ * ++ * Driver Library for CCDC module in TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * Contributors: ++ * Senthilvadivu Guruswamy ++ * Pallavi Kulkarni ++ * Sergio Aguirre ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#include ++#include ++#include ++ ++#include "isp.h" ++#include "ispreg.h" ++#include "ispccdc.h" ++#include "ispmmu.h" ++ ++#define LSC_TABLE_INIT_SIZE 50052 ++ ++static u32 *fpc_table_add; ++static unsigned long fpc_table_add_m; ++ ++/** ++ * struct isp_ccdc - Structure for the CCDC module to store its own information ++ * @ccdc_inuse: Flag to determine if CCDC has been reserved or not (0 or 1). ++ * @ccdcout_w: CCDC output width. ++ * @ccdcout_h: CCDC output height. ++ * @ccdcin_w: CCDC input width. ++ * @ccdcin_h: CCDC input height. ++ * @ccdcin_woffset: CCDC input horizontal offset. ++ * @ccdcin_hoffset: CCDC input vertical offset. ++ * @crop_w: Crop width. ++ * @crop_h: Crop weight. ++ * @ccdc_inpfmt: CCDC input format. ++ * @ccdc_outfmt: CCDC output format. ++ * @vpout_en: Video port output enable. ++ * @wen: Data write enable. ++ * @exwen: External data write enable. ++ * @refmt_en: Reformatter enable. ++ * @ccdcslave: CCDC slave mode enable. ++ * @syncif_ipmod: Image ++ * @obclamp_en: Data input format. ++ * @mutexlock: Mutex used to get access to the CCDC. ++ */ ++static struct isp_ccdc { ++ u8 ccdc_inuse; ++ u32 ccdcout_w; ++ u32 ccdcout_h; ++ u32 ccdcin_w; ++ u32 ccdcin_h; ++ u32 ccdcin_woffset; ++ u32 ccdcin_hoffset; ++ u32 crop_w; ++ u32 crop_h; ++ u8 ccdc_inpfmt; ++ u8 ccdc_outfmt; ++ u8 vpout_en; ++ u8 wen; ++ u8 exwen; ++ u8 refmt_en; ++ u8 ccdcslave; ++ u8 syncif_ipmod; ++ u8 obclamp_en; ++ u8 pm_state; ++ u8 lsc_enable; ++ int lsc_state; ++ struct mutex mutexlock; /* For checking/modifying ccdc_inuse */ ++ u32 wenlog; ++} ispccdc_obj; ++ ++static struct ispccdc_lsc_config lsc_config; ++static u8 *lsc_gain_table; ++static unsigned long lsc_ispmmu_addr; ++static int lsc_initialized; ++static u8 *lsc_gain_table_tmp; ++ ++/* Structure for saving/restoring CCDC module registers*/ ++static struct isp_reg ispccdc_reg_list[] = { ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_HD_VD_WID, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_PIX_LINES, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_HORZ_INFO, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VERT_START, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VERT_LINES, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CULLING, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_HSIZE_OFF, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDR_ADDR, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CLAMP, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_DCSUB, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_COLPTN, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_BLKCMP, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FPC, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FPC_ADDR, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VDINT, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_ALAW, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_REC656IF, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_HORZ, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_VERT, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_ADDR0, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_ADDR1, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_ADDR2, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_ADDR3, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_ADDR4, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_ADDR5, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_ADDR6, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_ADDR7, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_PRGEVEN0, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_PRGEVEN1, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_PRGODD0, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_PRGODD1, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VP_OUT, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_CONFIG, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_INITIAL, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_TABLE_BASE, 0}, ++ {OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_TABLE_OFFSET, 0}, ++ {0, ISP_TOK_TERM, 0} ++}; ++ ++/** ++ * omap34xx_isp_ccdc_config - Sets CCDC configuration from userspace ++ * @userspace_add: Structure containing CCDC configuration sent from userspace. ++ * ++ * Returns 0 if successful, -EINVAL if the pointer to the configuration ++ * structure is null, or the copy_from_user function fails to copy user space ++ * memory to kernel space memory. ++ **/ ++int omap34xx_isp_ccdc_config(void *userspace_add) ++{ ++ struct ispccdc_bclamp bclamp_t; ++ struct ispccdc_blcomp blcomp_t; ++ struct ispccdc_fpc fpc_t; ++ struct ispccdc_culling cull_t; ++ struct ispccdc_update_config *ccdc_struct; ++ ++ if (userspace_add == NULL) ++ return -EINVAL; ++ ++ ccdc_struct = userspace_add; ++ ++ if (ISP_ABS_CCDC_ALAW & ccdc_struct->flag) { ++ if (ISP_ABS_CCDC_ALAW & ccdc_struct->update) ++ ispccdc_config_alaw(ccdc_struct->alawip); ++ ispccdc_enable_alaw(1); ++ } else if (ISP_ABS_CCDC_ALAW & ccdc_struct->update) ++ ispccdc_enable_alaw(0); ++ ++ if (ISP_ABS_CCDC_LPF & ccdc_struct->flag) ++ ispccdc_enable_lpf(1); ++ else ++ ispccdc_enable_lpf(0); ++ ++ if (ISP_ABS_CCDC_BLCLAMP & ccdc_struct->flag) { ++ if (ISP_ABS_CCDC_BLCLAMP & ccdc_struct->update) { ++ if (copy_from_user(&bclamp_t, (struct ispccdc_bclamp *) ++ ccdc_struct->bclamp, ++ sizeof(struct ispccdc_bclamp))) ++ goto copy_from_user_err; ++ ++ ispccdc_enable_black_clamp(1); ++ ispccdc_config_black_clamp(bclamp_t); ++ } else ++ ispccdc_enable_black_clamp(1); ++ } else { ++ if (ISP_ABS_CCDC_BLCLAMP & ccdc_struct->update) { ++ if (copy_from_user(&bclamp_t, (struct ispccdc_bclamp *) ++ ccdc_struct->bclamp, ++ sizeof(struct ispccdc_bclamp))) ++ goto copy_from_user_err; ++ ++ ispccdc_enable_black_clamp(0); ++ ispccdc_config_black_clamp(bclamp_t); ++ } ++ } ++ ++ if (ISP_ABS_CCDC_BCOMP & ccdc_struct->update) { ++ if (copy_from_user(&blcomp_t, (struct ispccdc_blcomp *) ++ ccdc_struct->blcomp, ++ sizeof(blcomp_t))) ++ goto copy_from_user_err; ++ ++ ispccdc_config_black_comp(blcomp_t); ++ } ++ ++ if (ISP_ABS_CCDC_FPC & ccdc_struct->flag) { ++ if (ISP_ABS_CCDC_FPC & ccdc_struct->update) { ++ if (copy_from_user(&fpc_t, (struct ispccdc_fpc *) ++ ccdc_struct->fpc, ++ sizeof(fpc_t))) ++ goto copy_from_user_err; ++ fpc_table_add = kmalloc(64 + fpc_t.fpnum * 4, ++ GFP_KERNEL | GFP_DMA); ++ if (!fpc_table_add) { ++ printk(KERN_ERR "Cannot allocate memory for" ++ " FPC table"); ++ return -ENOMEM; ++ } ++ while (((unsigned long)fpc_table_add & 0xFFFFFFC0) ++ != (unsigned long)fpc_table_add) ++ fpc_table_add++; ++ ++ fpc_table_add_m = ispmmu_kmap(virt_to_phys ++ (fpc_table_add), ++ fpc_t.fpnum * 4); ++ ++ if (copy_from_user(fpc_table_add, (u32 *)fpc_t.fpcaddr, ++ fpc_t.fpnum * 4)) ++ goto copy_from_user_err; ++ ++ fpc_t.fpcaddr = fpc_table_add_m; ++ ispccdc_config_fpc(fpc_t); ++ } ++ ispccdc_enable_fpc(1); ++ } else if (ISP_ABS_CCDC_FPC & ccdc_struct->update) ++ ispccdc_enable_fpc(0); ++ ++ if (ISP_ABS_CCDC_CULL & ccdc_struct->update) { ++ if (copy_from_user(&cull_t, (struct ispccdc_culling *) ++ ccdc_struct->cull, ++ sizeof(cull_t))) ++ goto copy_from_user_err; ++ ispccdc_config_culling(cull_t); ++ } ++ ++ if (is_isplsc_activated()) { ++ if (ISP_ABS_CCDC_CONFIG_LSC & ccdc_struct->flag) { ++ if (ISP_ABS_CCDC_CONFIG_LSC & ccdc_struct->update) { ++ if (copy_from_user( ++ &lsc_config, ++ (struct ispccdc_lsc_config *) ++ ccdc_struct->lsc_cfg, ++ sizeof(struct ispccdc_lsc_config))) ++ goto copy_from_user_err; ++ ispccdc_config_lsc(&lsc_config); ++ } ++ ispccdc_enable_lsc(1); ++ } else if (ISP_ABS_CCDC_CONFIG_LSC & ccdc_struct->update) { ++ ispccdc_enable_lsc(0); ++ } ++ if (ISP_ABS_TBL_LSC & ccdc_struct->update) { ++ if (copy_from_user(lsc_gain_table, ++ ccdc_struct->lsc, lsc_config.size)) ++ goto copy_from_user_err; ++ ispccdc_load_lsc(lsc_gain_table, lsc_config.size); ++ } ++ } ++ ++ if (ISP_ABS_CCDC_COLPTN & ccdc_struct->update) ++ ispccdc_config_imgattr(ccdc_struct->colptn); ++ ++ return 0; ++ ++copy_from_user_err: ++ printk(KERN_ERR "CCDC Config:Copy From User Error"); ++ return -EINVAL ; ++} ++EXPORT_SYMBOL(omap34xx_isp_ccdc_config); ++ ++/** ++ * Set the value to be used for CCDC_CFG.WENLOG. ++ * w - Value of wenlog. ++ */ ++void ispccdc_set_wenlog(u32 wenlog) ++{ ++ ispccdc_obj.wenlog = wenlog; ++} ++EXPORT_SYMBOL(ispccdc_set_wenlog); ++ ++/** ++ * ispccdc_request - Reserves the CCDC module. ++ * ++ * Reserves the CCDC module and assures that is used only once at a time. ++ * ++ * Returns 0 if successful, or -EBUSY if CCDC module is busy. ++ **/ ++int ispccdc_request(void) ++{ ++ mutex_lock(&ispccdc_obj.mutexlock); ++ if (ispccdc_obj.ccdc_inuse) { ++ mutex_unlock(&ispccdc_obj.mutexlock); ++ DPRINTK_ISPCCDC("ISP_ERR : CCDC Module Busy\n"); ++ return -EBUSY; ++ } ++ ++ ispccdc_obj.ccdc_inuse = 1; ++ mutex_unlock(&ispccdc_obj.mutexlock); ++ isp_reg_or(OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, ISPCTRL_CCDC_RAM_EN | ++ ISPCTRL_CCDC_CLK_EN | ++ ISPCTRL_SBL_WR1_RAM_EN); ++ isp_reg_or(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG, ISPCCDC_CFG_VDLC); ++ return 0; ++} ++EXPORT_SYMBOL(ispccdc_request); ++ ++/** ++ * ispccdc_free - Frees the CCDC module. ++ * ++ * Frees the CCDC module so it can be used by another process. ++ * ++ * Returns 0 if successful, or -EINVAL if module has been already freed. ++ **/ ++int ispccdc_free(void) ++{ ++ mutex_lock(&ispccdc_obj.mutexlock); ++ if (!ispccdc_obj.ccdc_inuse) { ++ mutex_unlock(&ispccdc_obj.mutexlock); ++ DPRINTK_ISPCCDC("ISP_ERR: CCDC Module already freed\n"); ++ return -EINVAL; ++ } ++ ++ ispccdc_obj.ccdc_inuse = 0; ++ mutex_unlock(&ispccdc_obj.mutexlock); ++ isp_reg_and(OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, ++ ~(ISPCTRL_CCDC_CLK_EN | ++ ISPCTRL_CCDC_RAM_EN | ++ ISPCTRL_SBL_WR1_RAM_EN)); ++ return 0; ++} ++EXPORT_SYMBOL(ispccdc_free); ++ ++/** ++ * ispccdc_free_lsc - Frees Lens Shading Compensation table ++ * ++ * Always returns 0. ++ **/ ++static int ispccdc_free_lsc(void) ++{ ++ if (!lsc_ispmmu_addr) ++ return 0; ++ ++ ispccdc_enable_lsc(0); ++ lsc_initialized = 0; ++ isp_reg_writel(0, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_TABLE_BASE); ++ ispmmu_kunmap(lsc_ispmmu_addr); ++ kfree(lsc_gain_table); ++ return 0; ++} ++ ++/** ++ * ispccdc_allocate_lsc - Allocate space for Lens Shading Compensation table ++ * @table_size: LSC gain table size. ++ * ++ * Returns 0 if successful, -ENOMEM of its no memory available, or -EINVAL if ++ * table_size is zero. ++ **/ ++static int ispccdc_allocate_lsc(u32 table_size) ++{ ++ if (table_size == 0) ++ return -EINVAL; ++ ++ if ((lsc_config.size >= table_size) && lsc_gain_table) ++ return 0; ++ ++ ispccdc_free_lsc(); ++ ++ lsc_gain_table = kmalloc(table_size, GFP_KERNEL | GFP_DMA); ++ ++ if (!lsc_gain_table) { ++ printk(KERN_ERR "Cannot allocate memory for gain tables \n"); ++ return -ENOMEM; ++ } ++ ++ lsc_ispmmu_addr = ispmmu_kmap(virt_to_phys(lsc_gain_table), table_size); ++ if (lsc_ispmmu_addr <= 0) { ++ printk(KERN_ERR "Cannot map memory for gain tables \n"); ++ kfree(lsc_gain_table); ++ return -ENOMEM; ++ } ++ ++ return 0; ++} ++ ++/** ++ * ispccdc_program_lsc - Program Lens Shading Compensation table. ++ * @table_size: LSC gain table size. ++ * ++ * Returns 0 if successful, or -EINVAL if there's no mapped address for the ++ * table yet. ++ **/ ++static int ispccdc_program_lsc(void) ++{ ++ if (!lsc_ispmmu_addr) ++ return -EINVAL; ++ ++ if (lsc_initialized) ++ return 0; ++ ++ isp_reg_writel(lsc_ispmmu_addr, OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_LSC_TABLE_BASE); ++ lsc_initialized = 1; ++ return 0; ++} ++ ++/** ++ * ispccdc_load_lsc - Load Lens Shading Compensation table. ++ * @table_addr: LSC gain table MMU Mapped address. ++ * @table_size: LSC gain table size. ++ * ++ * Returns 0 if successful, -ENOMEM of its no memory available, or -EINVAL if ++ * table_size is zero. ++ **/ ++int ispccdc_load_lsc(u8 *table_addr, u32 table_size) ++{ ++ int ret; ++ ++ if (!is_isplsc_activated()) ++ return 0; ++ ++ if (!table_addr) ++ return -EINVAL; ++ ++ ret = ispccdc_allocate_lsc(table_size); ++ if (ret) ++ return ret; ++ ++ if (table_addr != lsc_gain_table) ++ memcpy(lsc_gain_table, table_addr, table_size); ++ ret = ispccdc_program_lsc(); ++ if (ret) ++ return ret; ++ return 0; ++} ++EXPORT_SYMBOL(ispccdc_load_lsc); ++ ++/** ++ * ispccdc_config_lsc - Configures the lens shading compensation module ++ * @lsc_cfg: LSC configuration structure ++ **/ ++void ispccdc_config_lsc(struct ispccdc_lsc_config *lsc_cfg) ++{ ++ int reg; ++ ++ if (!is_isplsc_activated()) ++ return; ++ ++ ispccdc_enable_lsc(0); ++ isp_reg_writel(lsc_cfg->offset, OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_LSC_TABLE_OFFSET); ++ ++ reg = 0; ++ reg |= lsc_cfg->gain_mode_n << ISPCCDC_LSC_GAIN_MODE_N_SHIFT; ++ reg |= lsc_cfg->gain_mode_m << ISPCCDC_LSC_GAIN_MODE_M_SHIFT; ++ reg |= lsc_cfg->gain_format << ISPCCDC_LSC_GAIN_FORMAT_SHIFT; ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_CONFIG); ++ ++ reg = 0; ++ reg &= ~ISPCCDC_LSC_INITIAL_X_MASK; ++ reg |= lsc_cfg->initial_x << ISPCCDC_LSC_INITIAL_X_SHIFT; ++ reg &= ~ISPCCDC_LSC_INITIAL_Y_MASK; ++ reg |= lsc_cfg->initial_y << ISPCCDC_LSC_INITIAL_Y_SHIFT; ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_INITIAL); ++} ++EXPORT_SYMBOL(ispccdc_config_lsc); ++ ++int __ispccdc_enable_lsc(u8 enable) ++{ ++ if (!is_isplsc_activated()) ++ return -ENODEV; ++ ++ if (enable) { ++ if (!ispccdc_busy()) { ++ isp_reg_or(OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, ++ ISPCTRL_SBL_SHARED_RPORTB ++ | ISPCTRL_SBL_RD_RAM_EN); ++ ++ isp_reg_or(OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_LSC_CONFIG, 0x1); ++ ++ ispccdc_obj.lsc_state = 1; ++ } else { ++ /* Postpone enabling LSC */ ++ ispccdc_obj.lsc_enable = 1; ++ return -EBUSY; ++ } ++ } else { ++ isp_reg_and(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_LSC_CONFIG, 0xFFFE); ++ ispccdc_obj.lsc_state = ispccdc_obj.lsc_enable = 0; ++ } ++ ++ return 0; ++} ++ ++/** ++ * ispccdc_enable_lsc - Enables/Disables the Lens Shading Compensation module. ++ * @enable: 0 Disables LSC, 1 Enables LSC. ++ **/ ++void ispccdc_enable_lsc(u8 enable) ++{ ++ if (__ispccdc_enable_lsc(enable)) { ++ if (enable) ++ ispccdc_obj.lsc_state = 1; ++ else ++ ispccdc_obj.lsc_state = ispccdc_obj.lsc_enable = 0; ++ } ++} ++EXPORT_SYMBOL(ispccdc_enable_lsc); ++ ++void ispccdc_lsc_error_handler(void) ++{ ++ int lsc_enable = ispccdc_obj.lsc_state; ++ ++ ispccdc_enable_lsc(0); ++ ++ ispccdc_obj.lsc_enable = lsc_enable; ++} ++ ++/** ++ * ispccdc_config_crop - Configures crop parameters for the ISP CCDC. ++ * @left: Left offset of the crop area. ++ * @top: Top offset of the crop area. ++ * @height: Height of the crop area. ++ * @width: Width of the crop area. ++ * ++ * The following restrictions are applied for the crop settings. If incoming ++ * values do not follow these restrictions then we map the settings to the ++ * closest acceptable crop value. ++ * 1) Left offset is always odd. This can be avoided if we enable byte swap ++ * option for incoming data into CCDC. ++ * 2) Top offset is always even. ++ * 3) Crop height is always even. ++ * 4) Crop width is always a multiple of 16 pixels ++ **/ ++void ispccdc_config_crop(u32 left, u32 top, u32 height, u32 width) ++{ ++ ispccdc_obj.ccdcin_woffset = left + (left % 2); ++ ispccdc_obj.ccdcin_hoffset = top + (top % 2); ++ ++ ispccdc_obj.crop_w = width - (width % 16); ++ ispccdc_obj.crop_h = height + (height % 2); ++ ++ DPRINTK_ISPCCDC("\n\tOffsets L %d T %d W %d H %d\n", ++ ispccdc_obj.ccdcin_woffset, ++ ispccdc_obj.ccdcin_hoffset, ++ ispccdc_obj.crop_w, ++ ispccdc_obj.crop_h); ++} ++ ++/** ++ * ispccdc_config_datapath - Specifies the input and output modules for CCDC. ++ * @input: Indicates the module that inputs the image to the CCDC. ++ * @output: Indicates the module to which the CCDC outputs the image. ++ * ++ * Configures the default configuration for the CCDC to work with. ++ * ++ * The valid values for the input are CCDC_RAW (0), CCDC_YUV_SYNC (1), ++ * CCDC_YUV_BT (2), and CCDC_OTHERS (3). ++ * ++ * The valid values for the output are CCDC_YUV_RSZ (0), CCDC_YUV_MEM_RSZ (1), ++ * CCDC_OTHERS_VP (2), CCDC_OTHERS_MEM (3), CCDC_OTHERS_VP_MEM (4). ++ * ++ * Returns 0 if successful, or -EINVAL if wrong I/O combination or wrong input ++ * or output values. ++ **/ ++int ispccdc_config_datapath(enum ccdc_input input, enum ccdc_output output) ++{ ++ u32 syn_mode = 0; ++ struct ispccdc_vp vpcfg; ++ struct ispccdc_syncif syncif; ++ struct ispccdc_bclamp blkcfg; ++ ++ u32 colptn = ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP0PLC0_SHIFT | ++ ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP0PLC1_SHIFT | ++ ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP0PLC2_SHIFT | ++ ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP0PLC3_SHIFT | ++ ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP1PLC0_SHIFT | ++ ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP1PLC1_SHIFT | ++ ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP1PLC2_SHIFT | ++ ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP1PLC3_SHIFT | ++ ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP2PLC0_SHIFT | ++ ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP2PLC1_SHIFT | ++ ISPCCDC_COLPTN_Gr_Cy << ISPCCDC_COLPTN_CP2PLC2_SHIFT | ++ ISPCCDC_COLPTN_R_Ye << ISPCCDC_COLPTN_CP2PLC3_SHIFT | ++ ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP3PLC0_SHIFT | ++ ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP3PLC1_SHIFT | ++ ISPCCDC_COLPTN_B_Mg << ISPCCDC_COLPTN_CP3PLC2_SHIFT | ++ ISPCCDC_COLPTN_Gb_G << ISPCCDC_COLPTN_CP3PLC3_SHIFT; ++ ++ /* CCDC does not convert the image format */ ++ if ((input == CCDC_RAW || input == CCDC_OTHERS) && ++ output == CCDC_YUV_RSZ) { ++ DPRINTK_ISPCCDC("ISP_ERR: Wrong CCDC I/O Combination\n"); ++ return -EINVAL; ++ } ++ ++ syn_mode = isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE); ++ ++ switch (output) { ++ case CCDC_YUV_RSZ: ++ syn_mode |= ISPCCDC_SYN_MODE_SDR2RSZ; ++ syn_mode &= ~ISPCCDC_SYN_MODE_WEN; ++ break; ++ ++ case CCDC_YUV_MEM_RSZ: ++ syn_mode |= ISPCCDC_SYN_MODE_SDR2RSZ; ++ ispccdc_obj.wen = 1; ++ syn_mode |= ISPCCDC_SYN_MODE_WEN; ++ break; ++ ++ case CCDC_OTHERS_VP: ++ syn_mode &= ~ISPCCDC_SYN_MODE_VP2SDR; ++ syn_mode &= ~ISPCCDC_SYN_MODE_SDR2RSZ; ++ syn_mode &= ~ISPCCDC_SYN_MODE_WEN; ++ vpcfg.bitshift_sel = BIT9_0; ++ vpcfg.freq_sel = PIXCLKBY2; ++ ispccdc_config_vp(vpcfg); ++ ispccdc_enable_vp(1); ++ break; ++ ++ case CCDC_OTHERS_MEM: ++ syn_mode &= ~ISPCCDC_SYN_MODE_VP2SDR; ++ syn_mode &= ~ISPCCDC_SYN_MODE_SDR2RSZ; ++ syn_mode |= ISPCCDC_SYN_MODE_WEN; ++ syn_mode &= ~ISPCCDC_SYN_MODE_EXWEN; ++ isp_reg_and(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG, ++ ~ISPCCDC_CFG_WENLOG); ++ vpcfg.bitshift_sel = BIT11_2; ++ vpcfg.freq_sel = PIXCLKBY2; ++ ispccdc_config_vp(vpcfg); ++ ispccdc_enable_vp(0); ++ break; ++ ++ case CCDC_OTHERS_VP_MEM: ++ syn_mode &= ~ISPCCDC_SYN_MODE_VP2SDR; ++ syn_mode &= ~ISPCCDC_SYN_MODE_SDR2RSZ; ++ syn_mode |= ISPCCDC_SYN_MODE_WEN; ++ syn_mode &= ~ISPCCDC_SYN_MODE_EXWEN; ++ ++ isp_reg_and_or(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG, ++ ~ISPCCDC_CFG_WENLOG, ++ ispccdc_obj.wenlog); ++ vpcfg.bitshift_sel = BIT9_0; ++ vpcfg.freq_sel = PIXCLKBY2; ++ ispccdc_config_vp(vpcfg); ++ ispccdc_enable_vp(1); ++ break; ++ default: ++ DPRINTK_ISPCCDC("ISP_ERR: Wrong CCDC Output\n"); ++ return -EINVAL; ++ }; ++ ++ isp_reg_writel(syn_mode, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE); ++ ++ switch (input) { ++ case CCDC_RAW: ++ syncif.ccdc_mastermode = 0; ++ syncif.datapol = 0; ++ syncif.datsz = DAT10; ++ syncif.fldmode = 0; ++ syncif.fldout = 0; ++ syncif.fldpol = 0; ++ syncif.fldstat = 0; ++ syncif.hdpol = 0; ++ syncif.ipmod = RAW; ++ syncif.vdpol = 0; ++ ispccdc_config_sync_if(syncif); ++ ispccdc_config_imgattr(colptn); ++ blkcfg.dcsubval = 64; ++ ispccdc_config_black_clamp(blkcfg); ++ if (is_isplsc_activated()) { ++ ispccdc_config_lsc(&lsc_config); ++ ispccdc_load_lsc(lsc_gain_table_tmp, ++ LSC_TABLE_INIT_SIZE); ++ } ++ ++ break; ++ case CCDC_YUV_SYNC: ++ syncif.ccdc_mastermode = 0; ++ syncif.datapol = 0; ++ syncif.datsz = DAT8; ++ syncif.fldmode = 0; ++ syncif.fldout = 0; ++ syncif.fldpol = 0; ++ syncif.fldstat = 0; ++ syncif.hdpol = 0; ++ syncif.ipmod = YUV16; ++ syncif.vdpol = 1; ++ ispccdc_config_imgattr(0); ++ ispccdc_config_sync_if(syncif); ++ blkcfg.dcsubval = 0; ++ ispccdc_config_black_clamp(blkcfg); ++ break; ++ case CCDC_YUV_BT: ++ break; ++ case CCDC_OTHERS: ++ break; ++ default: ++ DPRINTK_ISPCCDC("ISP_ERR: Wrong CCDC Input\n"); ++ return -EINVAL; ++ } ++ ++ ispccdc_obj.ccdc_inpfmt = input; ++ ispccdc_obj.ccdc_outfmt = output; ++ ispccdc_print_status(); ++ isp_print_status(); ++ return 0; ++} ++EXPORT_SYMBOL(ispccdc_config_datapath); ++ ++/** ++ * ispccdc_config_sync_if - Sets the sync i/f params between sensor and CCDC. ++ * @syncif: Structure containing the sync parameters like field state, CCDC in ++ * master/slave mode, raw/yuv data, polarity of data, field, hs, vs ++ * signals. ++ **/ ++void ispccdc_config_sync_if(struct ispccdc_syncif syncif) ++{ ++ u32 syn_mode = isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE); ++ ++ syn_mode |= ISPCCDC_SYN_MODE_VDHDEN; ++ ++ if (syncif.fldstat) ++ syn_mode |= ISPCCDC_SYN_MODE_FLDSTAT; ++ else ++ syn_mode &= ~ISPCCDC_SYN_MODE_FLDSTAT; ++ ++ syn_mode &= ISPCCDC_SYN_MODE_INPMOD_MASK; ++ ispccdc_obj.syncif_ipmod = syncif.ipmod; ++ ++ switch (syncif.ipmod) { ++ case RAW: ++ break; ++ case YUV16: ++ syn_mode |= ISPCCDC_SYN_MODE_INPMOD_YCBCR16; ++ break; ++ case YUV8: ++ syn_mode |= ISPCCDC_SYN_MODE_INPMOD_YCBCR8; ++ break; ++ }; ++ ++ syn_mode &= ISPCCDC_SYN_MODE_DATSIZ_MASK; ++ switch (syncif.datsz) { ++ case DAT8: ++ syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_8; ++ break; ++ case DAT10: ++ syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_10; ++ break; ++ case DAT11: ++ syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_11; ++ break; ++ case DAT12: ++ syn_mode |= ISPCCDC_SYN_MODE_DATSIZ_12; ++ break; ++ }; ++ ++ if (syncif.fldmode) ++ syn_mode |= ISPCCDC_SYN_MODE_FLDMODE; ++ else ++ syn_mode &= ~ISPCCDC_SYN_MODE_FLDMODE; ++ ++ if (syncif.datapol) ++ syn_mode |= ISPCCDC_SYN_MODE_DATAPOL; ++ else ++ syn_mode &= ~ISPCCDC_SYN_MODE_DATAPOL; ++ ++ if (syncif.fldpol) ++ syn_mode |= ISPCCDC_SYN_MODE_FLDPOL; ++ else ++ syn_mode &= ~ISPCCDC_SYN_MODE_FLDPOL; ++ ++ if (syncif.hdpol) ++ syn_mode |= ISPCCDC_SYN_MODE_HDPOL; ++ else ++ syn_mode &= ~ISPCCDC_SYN_MODE_HDPOL; ++ ++ if (syncif.vdpol) ++ syn_mode |= ISPCCDC_SYN_MODE_VDPOL; ++ else ++ syn_mode &= ~ISPCCDC_SYN_MODE_VDPOL; ++ ++ if (syncif.ccdc_mastermode) { ++ syn_mode |= ISPCCDC_SYN_MODE_FLDOUT | ISPCCDC_SYN_MODE_VDHDOUT; ++ isp_reg_writel(syncif.hs_width << ISPCCDC_HD_VD_WID_HDW_SHIFT ++ | syncif.vs_width << ISPCCDC_HD_VD_WID_VDW_SHIFT, ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_HD_VD_WID); ++ ++ isp_reg_writel(syncif.ppln << ISPCCDC_PIX_LINES_PPLN_SHIFT ++ | syncif.hlprf << ISPCCDC_PIX_LINES_HLPRF_SHIFT, ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_PIX_LINES); ++ } else ++ syn_mode &= ~(ISPCCDC_SYN_MODE_FLDOUT | ++ ISPCCDC_SYN_MODE_VDHDOUT); ++ ++ isp_reg_writel(syn_mode, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE); ++ ++ if (!(syncif.bt_r656_en)) { ++ isp_reg_and(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_REC656IF, ++ ~ISPCCDC_REC656IF_R656ON); ++ } ++} ++EXPORT_SYMBOL(ispccdc_config_sync_if); ++ ++/** ++ * ispccdc_config_black_clamp - Configures the clamp parameters in CCDC. ++ * @bclamp: Structure containing the optical black average gain, optical black ++ * sample length, sample lines, and the start pixel position of the ++ * samples w.r.t the HS pulse. ++ * Configures the clamp parameters in CCDC. Either if its being used the ++ * optical black clamp, or the digital clamp. If its a digital clamp, then ++ * assures to put a valid DC substraction level. ++ * ++ * Returns always 0 when completed. ++ **/ ++int ispccdc_config_black_clamp(struct ispccdc_bclamp bclamp) ++{ ++ u32 bclamp_val = 0; ++ ++ if (ispccdc_obj.obclamp_en) { ++ bclamp_val |= bclamp.obgain << ISPCCDC_CLAMP_OBGAIN_SHIFT; ++ bclamp_val |= bclamp.oblen << ISPCCDC_CLAMP_OBSLEN_SHIFT; ++ bclamp_val |= bclamp.oblines << ISPCCDC_CLAMP_OBSLN_SHIFT; ++ bclamp_val |= bclamp.obstpixel << ISPCCDC_CLAMP_OBST_SHIFT; ++ isp_reg_writel(bclamp_val, OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_CLAMP); ++ } else { ++ if (omap_rev() < OMAP3430_REV_ES2_0) ++ if (ispccdc_obj.syncif_ipmod == YUV16 || ++ ispccdc_obj.syncif_ipmod == YUV8 || ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_REC656IF) & ++ ISPCCDC_REC656IF_R656ON) ++ bclamp.dcsubval = 0; ++ isp_reg_writel(bclamp.dcsubval, OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_DCSUB); ++ } ++ return 0; ++} ++EXPORT_SYMBOL(ispccdc_config_black_clamp); ++ ++/** ++ * ispccdc_enable_black_clamp - Enables/Disables the optical black clamp. ++ * @enable: 0 Disables optical black clamp, 1 Enables optical black clamp. ++ * ++ * Enables or disables the optical black clamp. When disabled, the digital ++ * clamp operates. ++ **/ ++void ispccdc_enable_black_clamp(u8 enable) ++{ ++ isp_reg_and_or(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CLAMP, ++ ~ISPCCDC_CLAMP_CLAMPEN, ++ enable ? ISPCCDC_CLAMP_CLAMPEN : 0); ++ ispccdc_obj.obclamp_en = enable; ++} ++EXPORT_SYMBOL(ispccdc_enable_black_clamp); ++ ++/** ++ * ispccdc_config_fpc - Configures the Faulty Pixel Correction parameters. ++ * @fpc: Structure containing the number of faulty pixels corrected in the ++ * frame, address of the FPC table. ++ * ++ * Returns 0 if successful, or -EINVAL if FPC Address is not on the 64 byte ++ * boundary. ++ **/ ++int ispccdc_config_fpc(struct ispccdc_fpc fpc) ++{ ++ u32 fpc_val = 0; ++ ++ fpc_val = isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FPC); ++ ++ if ((fpc.fpcaddr & 0xFFFFFFC0) == fpc.fpcaddr) { ++ isp_reg_writel(fpc_val & (~ISPCCDC_FPC_FPCEN), ++ OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FPC); ++ isp_reg_writel(fpc.fpcaddr, ++ OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FPC_ADDR); ++ } else { ++ DPRINTK_ISPCCDC("FPC Address should be on 64byte boundary\n"); ++ return -EINVAL; ++ } ++ isp_reg_writel(fpc_val | (fpc.fpnum << ISPCCDC_FPC_FPNUM_SHIFT), ++ OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FPC); ++ return 0; ++} ++EXPORT_SYMBOL(ispccdc_config_fpc); ++ ++/** ++ * ispccdc_enable_fpc - Enables the Faulty Pixel Correction. ++ * @enable: 0 Disables FPC, 1 Enables FPC. ++ **/ ++void ispccdc_enable_fpc(u8 enable) ++{ ++ isp_reg_and_or(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FPC, ++ ~ISPCCDC_FPC_FPCEN, ++ enable ? ISPCCDC_FPC_FPCEN : 0); ++} ++EXPORT_SYMBOL(ispccdc_enable_fpc); ++ ++/** ++ * ispccdc_config_black_comp - Configures Black Level Compensation parameters. ++ * @blcomp: Structure containing the black level compensation value for RGrGbB ++ * pixels. in 2's complement. ++ **/ ++void ispccdc_config_black_comp(struct ispccdc_blcomp blcomp) ++{ ++ u32 blcomp_val = 0; ++ ++ blcomp_val |= blcomp.b_mg << ISPCCDC_BLKCMP_B_MG_SHIFT; ++ blcomp_val |= blcomp.gb_g << ISPCCDC_BLKCMP_GB_G_SHIFT; ++ blcomp_val |= blcomp.gr_cy << ISPCCDC_BLKCMP_GR_CY_SHIFT; ++ blcomp_val |= blcomp.r_ye << ISPCCDC_BLKCMP_R_YE_SHIFT; ++ ++ isp_reg_writel(blcomp_val, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_BLKCMP); ++} ++EXPORT_SYMBOL(ispccdc_config_black_comp); ++ ++/** ++ * ispccdc_config_vp - Configures the Video Port Configuration parameters. ++ * @vpcfg: Structure containing the Video Port input frequency, and the 10 bit ++ * format. ++ **/ ++void ispccdc_config_vp(struct ispccdc_vp vpcfg) ++{ ++ u32 fmtcfg_vp = isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG); ++ ++ fmtcfg_vp &= ISPCCDC_FMTCFG_VPIN_MASK & ISPCCDC_FMTCF_VPIF_FRQ_MASK; ++ ++ switch (vpcfg.bitshift_sel) { ++ case BIT9_0: ++ fmtcfg_vp |= ISPCCDC_FMTCFG_VPIN_9_0; ++ break; ++ case BIT10_1: ++ fmtcfg_vp |= ISPCCDC_FMTCFG_VPIN_10_1; ++ break; ++ case BIT11_2: ++ fmtcfg_vp |= ISPCCDC_FMTCFG_VPIN_11_2; ++ break; ++ case BIT12_3: ++ fmtcfg_vp |= ISPCCDC_FMTCFG_VPIN_12_3; ++ break; ++ }; ++ switch (vpcfg.freq_sel) { ++ case PIXCLKBY2: ++ fmtcfg_vp |= ISPCCDC_FMTCF_VPIF_FRQ_BY2; ++ break; ++ case PIXCLKBY3_5: ++ fmtcfg_vp |= ISPCCDC_FMTCF_VPIF_FRQ_BY3; ++ break; ++ case PIXCLKBY4_5: ++ fmtcfg_vp |= ISPCCDC_FMTCF_VPIF_FRQ_BY4; ++ break; ++ case PIXCLKBY5_5: ++ fmtcfg_vp |= ISPCCDC_FMTCF_VPIF_FRQ_BY5; ++ break; ++ case PIXCLKBY6_5: ++ fmtcfg_vp |= ISPCCDC_FMTCF_VPIF_FRQ_BY6; ++ break; ++ }; ++ isp_reg_writel(fmtcfg_vp, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG); ++} ++EXPORT_SYMBOL(ispccdc_config_vp); ++ ++/** ++ * ispccdc_enable_vp - Enables the Video Port. ++ * @enable: 0 Disables VP, 1 Enables VP ++ **/ ++void ispccdc_enable_vp(u8 enable) ++{ ++ isp_reg_and_or(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG, ++ ~ISPCCDC_FMTCFG_VPEN, ++ enable ? ISPCCDC_FMTCFG_VPEN : 0); ++} ++EXPORT_SYMBOL(ispccdc_enable_vp); ++ ++/** ++ * ispccdc_config_reformatter - Configures the Reformatter. ++ * @refmt: Structure containing the memory address to format and the bit fields ++ * for the reformatter registers. ++ * ++ * Configures the Reformatter register values if line alternating is disabled. ++ * Else, just enabling line alternating is enough. ++ **/ ++void ispccdc_config_reformatter(struct ispccdc_refmt refmt) ++{ ++ u32 fmtcfg_val = 0; ++ ++ fmtcfg_val = isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG); ++ ++ if (refmt.lnalt) ++ fmtcfg_val |= ISPCCDC_FMTCFG_LNALT; ++ else { ++ fmtcfg_val &= ~ISPCCDC_FMTCFG_LNALT; ++ fmtcfg_val &= 0xFFFFF003; ++ fmtcfg_val |= refmt.lnum << ISPCCDC_FMTCFG_LNUM_SHIFT; ++ fmtcfg_val |= refmt.plen_even << ++ ISPCCDC_FMTCFG_PLEN_EVEN_SHIFT; ++ fmtcfg_val |= refmt.plen_odd << ISPCCDC_FMTCFG_PLEN_ODD_SHIFT; ++ ++ isp_reg_writel(refmt.prgeven0, OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_PRGEVEN0); ++ isp_reg_writel(refmt.prgeven1, OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_PRGEVEN1); ++ isp_reg_writel(refmt.prgodd0, OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_PRGODD0); ++ isp_reg_writel(refmt.prgodd1, OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_PRGODD1); ++ isp_reg_writel(refmt.fmtaddr0, OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_FMT_ADDR0); ++ isp_reg_writel(refmt.fmtaddr1, OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_FMT_ADDR1); ++ isp_reg_writel(refmt.fmtaddr2, OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_FMT_ADDR2); ++ isp_reg_writel(refmt.fmtaddr3, OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_FMT_ADDR3); ++ isp_reg_writel(refmt.fmtaddr4, OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_FMT_ADDR4); ++ isp_reg_writel(refmt.fmtaddr5, OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_FMT_ADDR5); ++ isp_reg_writel(refmt.fmtaddr6, OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_FMT_ADDR6); ++ isp_reg_writel(refmt.fmtaddr7, OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_FMT_ADDR7); ++ } ++ isp_reg_writel(fmtcfg_val, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG); ++} ++EXPORT_SYMBOL(ispccdc_config_reformatter); ++ ++/** ++ * ispccdc_enable_reformatter - Enables the Reformatter. ++ * @enable: 0 Disables Reformatter, 1- Enables Data Reformatter ++ **/ ++void ispccdc_enable_reformatter(u8 enable) ++{ ++ isp_reg_and_or(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG, ++ ~ISPCCDC_FMTCFG_FMTEN, ++ enable ? ISPCCDC_FMTCFG_FMTEN : 0); ++ ispccdc_obj.refmt_en = enable; ++} ++EXPORT_SYMBOL(ispccdc_enable_reformatter); ++ ++/** ++ * ispccdc_config_culling - Configures the culling parameters. ++ * @cull: Structure containing the vertical culling pattern, and horizontal ++ * culling pattern for odd and even lines. ++ **/ ++void ispccdc_config_culling(struct ispccdc_culling cull) ++{ ++ u32 culling_val = 0; ++ ++ culling_val |= cull.v_pattern << ISPCCDC_CULLING_CULV_SHIFT; ++ culling_val |= cull.h_even << ISPCCDC_CULLING_CULHEVN_SHIFT; ++ culling_val |= cull.h_odd << ISPCCDC_CULLING_CULHODD_SHIFT; ++ ++ isp_reg_writel(culling_val, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CULLING); ++} ++EXPORT_SYMBOL(ispccdc_config_culling); ++ ++/** ++ * ispccdc_enable_lpf - Enables the Low-Pass Filter (LPF). ++ * @enable: 0 Disables LPF, 1 Enables LPF ++ **/ ++void ispccdc_enable_lpf(u8 enable) ++{ ++ isp_reg_and_or(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE, ++ ~ISPCCDC_SYN_MODE_LPF, ++ enable ? ISPCCDC_SYN_MODE_LPF : 0); ++} ++EXPORT_SYMBOL(ispccdc_enable_lpf); ++ ++/** ++ * ispccdc_config_alaw - Configures the input width for A-law. ++ * @ipwidth: Input width for A-law ++ **/ ++void ispccdc_config_alaw(enum alaw_ipwidth ipwidth) ++{ ++ isp_reg_writel(ipwidth << ISPCCDC_ALAW_GWDI_SHIFT, ++ OMAP3_ISP_IOMEM_CCDC, ISPCCDC_ALAW); ++} ++EXPORT_SYMBOL(ispccdc_config_alaw); ++ ++/** ++ * ispccdc_enable_alaw - Enables the A-law compression. ++ * @enable: 0 - Disables A-law, 1 - Enables A-law ++ **/ ++void ispccdc_enable_alaw(u8 enable) ++{ ++ isp_reg_and_or(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_ALAW, ++ ~ISPCCDC_ALAW_CCDTBL, ++ enable ? ISPCCDC_ALAW_CCDTBL : 0); ++} ++EXPORT_SYMBOL(ispccdc_enable_alaw); ++ ++/** ++ * ispccdc_config_imgattr - Configures the sensor image specific attributes. ++ * @colptn: Color pattern of the sensor. ++ **/ ++void ispccdc_config_imgattr(u32 colptn) ++{ ++ isp_reg_writel(colptn, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_COLPTN); ++} ++EXPORT_SYMBOL(ispccdc_config_imgattr); ++ ++void ispccdc_config_shadow_registers(void) ++{ ++ if (ispccdc_obj.lsc_enable) { ++ ispccdc_enable_lsc(1); ++ ispccdc_obj.lsc_enable = 0; ++ } ++} ++ ++/** ++ * ispccdc_try_size - Checks if requested Input/output dimensions are valid ++ * @input_w: input width for the CCDC in number of pixels per line ++ * @input_h: input height for the CCDC in number of lines ++ * @output_w: output width from the CCDC in number of pixels per line ++ * @output_h: output height for the CCDC in number of lines ++ * ++ * Calculates the number of pixels cropped if the reformater is disabled, ++ * Fills up the output width and height variables in the isp_ccdc structure. ++ * ++ * Returns 0 if successful, or -EINVAL if the input width is less than 2 pixels ++ **/ ++int ispccdc_try_size(u32 input_w, u32 input_h, u32 *output_w, u32 *output_h) ++{ ++ if (input_w < 32 || input_h < 32) { ++ DPRINTK_ISPCCDC("ISP_ERR: CCDC cannot handle input width less" ++ " than 32 pixels or height less than 32\n"); ++ return -EINVAL; ++ } ++ ++ if (ispccdc_obj.crop_w) ++ *output_w = ispccdc_obj.crop_w; ++ else ++ *output_w = input_w; ++ ++ if (ispccdc_obj.crop_h) ++ *output_h = ispccdc_obj.crop_h; ++ else ++ *output_h = input_h; ++ ++ if (!ispccdc_obj.refmt_en ++ && ispccdc_obj.ccdc_outfmt != CCDC_OTHERS_MEM ++ && ispccdc_obj.ccdc_outfmt != CCDC_OTHERS_VP_MEM) ++ *output_h -= 1; ++ ++ if (ispccdc_obj.ccdc_outfmt == CCDC_OTHERS_MEM ++ || ispccdc_obj.ccdc_outfmt == CCDC_OTHERS_VP_MEM) { ++ if (*output_w % 16) { ++ *output_w -= (*output_w % 16); ++ *output_w += 16; ++ } ++ } ++ ++ ispccdc_obj.ccdcout_w = *output_w; ++ ispccdc_obj.ccdcout_h = *output_h; ++ ispccdc_obj.ccdcin_w = input_w; ++ ispccdc_obj.ccdcin_h = input_h; ++ ++ DPRINTK_ISPCCDC("try size: ccdcin_w=%u,ccdcin_h=%u,ccdcout_w=%u," ++ " ccdcout_h=%u\n", ++ ispccdc_obj.ccdcin_w, ++ ispccdc_obj.ccdcin_h, ++ ispccdc_obj.ccdcout_w, ++ ispccdc_obj.ccdcout_h); ++ ++ return 0; ++} ++EXPORT_SYMBOL(ispccdc_try_size); ++ ++/** ++ * ispccdc_config_size - Configure the dimensions of the CCDC input/output ++ * @input_w: input width for the CCDC in number of pixels per line ++ * @input_h: input height for the CCDC in number of lines ++ * @output_w: output width from the CCDC in number of pixels per line ++ * @output_h: output height for the CCDC in number of lines ++ * ++ * Configures the appropriate values stored in the isp_ccdc structure to ++ * HORZ/VERT_INFO registers and the VP_OUT depending on whether the image ++ * is stored in memory or given to the another module in the ISP pipeline. ++ * ++ * Returns 0 if successful, or -EINVAL if try_size was not called before to ++ * validate the requested dimensions. ++ **/ ++int ispccdc_config_size(u32 input_w, u32 input_h, u32 output_w, u32 output_h) ++{ ++ DPRINTK_ISPCCDC("config size: input_w=%u, input_h=%u, output_w=%u," ++ " output_h=%u\n", ++ input_w, input_h, ++ output_w, output_h); ++ if (output_w != ispccdc_obj.ccdcout_w ++ || output_h != ispccdc_obj.ccdcout_h) { ++ DPRINTK_ISPCCDC("ISP_ERR : ispccdc_try_size should" ++ " be called before config size\n"); ++ return -EINVAL; ++ } ++ ++ if (ispccdc_obj.ccdc_outfmt == CCDC_OTHERS_VP) { ++ isp_reg_writel((ispccdc_obj.ccdcin_woffset << ++ ISPCCDC_FMT_HORZ_FMTSPH_SHIFT) | ++ (ispccdc_obj.ccdcin_w << ++ ISPCCDC_FMT_HORZ_FMTLNH_SHIFT), ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_FMT_HORZ); ++ isp_reg_writel((ispccdc_obj.ccdcin_hoffset << ++ ISPCCDC_FMT_VERT_FMTSLV_SHIFT) | ++ (ispccdc_obj.ccdcin_h << ++ ISPCCDC_FMT_VERT_FMTLNV_SHIFT), ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_FMT_VERT); ++ isp_reg_writel((ispccdc_obj.ccdcout_w << ++ ISPCCDC_VP_OUT_HORZ_NUM_SHIFT) | ++ (ispccdc_obj.ccdcout_h - 1) << ++ ISPCCDC_VP_OUT_VERT_NUM_SHIFT, ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_VP_OUT); ++ isp_reg_writel((((ispccdc_obj.ccdcout_h - 25) & ++ ISPCCDC_VDINT_0_MASK) << ++ ISPCCDC_VDINT_0_SHIFT) | ++ ((50 & ISPCCDC_VDINT_1_MASK) << ++ ISPCCDC_VDINT_1_SHIFT), ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_VDINT); ++ ++ } else if (ispccdc_obj.ccdc_outfmt == CCDC_OTHERS_MEM) { ++ isp_reg_writel(0, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VP_OUT); ++ if (ispccdc_obj.ccdc_inpfmt == CCDC_RAW) { ++ isp_reg_writel(0 << ISPCCDC_HORZ_INFO_SPH_SHIFT ++ | ((ispccdc_obj.ccdcout_w - 1) ++ << ISPCCDC_HORZ_INFO_NPH_SHIFT), ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_HORZ_INFO); ++ } else { ++ isp_reg_writel(0 << ISPCCDC_HORZ_INFO_SPH_SHIFT ++ | ((ispccdc_obj.ccdcout_w - 1) ++ << ISPCCDC_HORZ_INFO_NPH_SHIFT), ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_HORZ_INFO); ++ } ++ isp_reg_writel(0 << ISPCCDC_VERT_START_SLV0_SHIFT, ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_VERT_START); ++ isp_reg_writel((ispccdc_obj.ccdcout_h - 1) << ++ ISPCCDC_VERT_LINES_NLV_SHIFT, ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_VERT_LINES); ++ ++ ispccdc_config_outlineoffset(ispccdc_obj.ccdcout_w * 2, 0, 0); ++ isp_reg_writel((((ispccdc_obj.ccdcout_h - 2) & ++ ISPCCDC_VDINT_0_MASK) << ++ ISPCCDC_VDINT_0_SHIFT) | ++ ((100 & ISPCCDC_VDINT_1_MASK) << ++ ISPCCDC_VDINT_1_SHIFT), ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_VDINT); ++ } else if (ispccdc_obj.ccdc_outfmt == CCDC_OTHERS_VP_MEM) { ++ isp_reg_writel((0 << ISPCCDC_FMT_HORZ_FMTSPH_SHIFT) | ++ (ispccdc_obj.ccdcin_w << ++ ISPCCDC_FMT_HORZ_FMTLNH_SHIFT), ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_FMT_HORZ); ++ isp_reg_writel((0 << ISPCCDC_FMT_VERT_FMTSLV_SHIFT) | ++ ((ispccdc_obj.ccdcin_h) << ++ ISPCCDC_FMT_VERT_FMTLNV_SHIFT), ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_FMT_VERT); ++ isp_reg_writel((ispccdc_obj.ccdcout_w ++ << ISPCCDC_VP_OUT_HORZ_NUM_SHIFT) | ++ ((ispccdc_obj.ccdcout_h - 1) << ++ ISPCCDC_VP_OUT_VERT_NUM_SHIFT), ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_VP_OUT); ++ isp_reg_writel(0 << ISPCCDC_HORZ_INFO_SPH_SHIFT | ++ ((ispccdc_obj.ccdcout_w - 1) << ++ ISPCCDC_HORZ_INFO_NPH_SHIFT), ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_HORZ_INFO); ++ isp_reg_writel(0 << ISPCCDC_VERT_START_SLV0_SHIFT, ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_VERT_START); ++ isp_reg_writel((ispccdc_obj.ccdcout_h - 1) << ++ ISPCCDC_VERT_LINES_NLV_SHIFT, ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_VERT_LINES); ++ ispccdc_config_outlineoffset(ispccdc_obj.ccdcout_w * 2, 0, 0); ++ isp_reg_writel((((ispccdc_obj.ccdcout_h - 2) & ++ ISPCCDC_VDINT_0_MASK) << ++ ISPCCDC_VDINT_0_SHIFT) | ++ ((100 & ISPCCDC_VDINT_1_MASK) << ++ ISPCCDC_VDINT_1_SHIFT), ++ OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_VDINT); ++ } ++ ++ if (is_isplsc_activated()) { ++ if (ispccdc_obj.ccdc_inpfmt == CCDC_RAW) { ++ ispccdc_config_lsc(&lsc_config); ++ ispccdc_load_lsc(lsc_gain_table, lsc_config.size); ++ } ++ } ++ ++ return 0; ++} ++EXPORT_SYMBOL(ispccdc_config_size); ++ ++/** ++ * ispccdc_config_outlineoffset - Configures the output line offset ++ * @offset: Must be twice the Output width and aligned on 32 byte boundary ++ * @oddeven: Specifies the odd/even line pattern to be chosen to store the ++ * output. ++ * @numlines: Set the value 0-3 for +1-4lines, 4-7 for -1-4lines. ++ * ++ * - Configures the output line offset when stored in memory ++ * - Sets the odd/even line pattern to store the output ++ * (EVENEVEN (1), ODDEVEN (2), EVENODD (3), ODDODD (4)) ++ * - Configures the number of even and odd line fields in case of rearranging ++ * the lines. ++ * ++ * Returns 0 if successful, or -EINVAL if the offset is not in 32 byte ++ * boundary. ++ **/ ++int ispccdc_config_outlineoffset(u32 offset, u8 oddeven, u8 numlines) ++{ ++ if ((offset & ISP_32B_BOUNDARY_OFFSET) == offset) { ++ isp_reg_writel((offset & 0xFFFF), OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_HSIZE_OFF); ++ } else { ++ DPRINTK_ISPCCDC("ISP_ERR : Offset should be in 32 byte" ++ " boundary\n"); ++ return -EINVAL; ++ } ++ ++ isp_reg_and(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, ++ ~ISPCCDC_SDOFST_FINV); ++ ++ isp_reg_and(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, ++ ~ISPCCDC_SDOFST_FOFST_4L); ++ ++ switch (oddeven) { ++ case EVENEVEN: ++ isp_reg_or(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, ++ (numlines & 0x7) << ISPCCDC_SDOFST_LOFST0_SHIFT); ++ break; ++ case ODDEVEN: ++ isp_reg_or(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, ++ (numlines & 0x7) << ISPCCDC_SDOFST_LOFST1_SHIFT); ++ break; ++ case EVENODD: ++ isp_reg_or(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, ++ (numlines & 0x7) << ISPCCDC_SDOFST_LOFST2_SHIFT); ++ break; ++ case ODDODD: ++ isp_reg_or(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST, ++ (numlines & 0x7) << ISPCCDC_SDOFST_LOFST3_SHIFT); ++ break; ++ default: ++ break; ++ } ++ return 0; ++} ++EXPORT_SYMBOL(ispccdc_config_outlineoffset); ++ ++/** ++ * ispccdc_set_outaddr - Sets the memory address where the output will be saved ++ * @addr: 32-bit memory address aligned on 32 byte boundary. ++ * ++ * Sets the memory address where the output will be saved. ++ * ++ * Returns 0 if successful, or -EINVAL if the address is not in the 32 byte ++ * boundary. ++ **/ ++int ispccdc_set_outaddr(u32 addr) ++{ ++ if ((addr & ISP_32B_BOUNDARY_BUF) == addr) { ++ isp_reg_writel(addr, OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDR_ADDR); ++ return 0; ++ } else { ++ DPRINTK_ISPCCDC("ISP_ERR : Address should be in 32 byte" ++ " boundary\n"); ++ return -EINVAL; ++ } ++ ++} ++EXPORT_SYMBOL(ispccdc_set_outaddr); ++ ++void __ispccdc_enable(u8 enable) ++{ ++ if (enable) { ++ if (ispccdc_obj.lsc_enable ++ && ispccdc_obj.ccdc_inpfmt == CCDC_RAW) ++ ispccdc_enable_lsc(1); ++ ++ } else { ++ ispccdc_obj.lsc_enable = ispccdc_obj.lsc_state; ++ } ++ ++ isp_reg_and_or(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_PCR, ~ISPCCDC_PCR_EN, ++ enable ? ISPCCDC_PCR_EN : 0); ++} ++ ++/** ++ * ispccdc_enable - Enables the CCDC module. ++ * @enable: 0 Disables CCDC, 1 Enables CCDC ++ * ++ * Client should configure all the sub modules in CCDC before this. ++ **/ ++void ispccdc_enable(u8 enable) ++{ ++ __ispccdc_enable(enable); ++ ispccdc_obj.pm_state = enable; ++} ++EXPORT_SYMBOL(ispccdc_enable); ++ ++/** ++ * ispccdc_suspend - Suspend the CCDC module. ++ **/ ++void ispccdc_suspend(void) ++{ ++ if (ispccdc_obj.pm_state) { ++ if (ispccdc_obj.lsc_state) ++ __ispccdc_enable_lsc(0); ++ else if (ispccdc_obj.lsc_enable) { ++ ispccdc_obj.lsc_state = 1; ++ ispccdc_obj.lsc_enable = 0; ++ } ++ __ispccdc_enable(0); ++ } ++} ++EXPORT_SYMBOL(ispccdc_suspend); ++ ++/** ++ * ispccdc_resume - Resume the CCDC module. ++ **/ ++void ispccdc_resume(void) ++{ ++ if (ispccdc_obj.pm_state) { ++ if (ispccdc_obj.lsc_state) ++ __ispccdc_enable_lsc(1); ++ __ispccdc_enable(1); ++ } ++} ++EXPORT_SYMBOL(ispccdc_resume); ++ ++/* ++ * Returns zero if the CCDC is idle and the image has been written to ++ * memory, too. ++ */ ++int ispccdc_sbl_busy(void) ++{ ++ return ispccdc_busy() ++ | (isp_reg_readl(OMAP3_ISP_IOMEM_SBL, ISPSBL_CCDC_WR_0) & ++ ISPSBL_CCDC_WR_0_DATA_READY) ++ | (isp_reg_readl(OMAP3_ISP_IOMEM_SBL, ISPSBL_CCDC_WR_1) & ++ ISPSBL_CCDC_WR_0_DATA_READY) ++ | (isp_reg_readl(OMAP3_ISP_IOMEM_SBL, ISPSBL_CCDC_WR_2) & ++ ISPSBL_CCDC_WR_0_DATA_READY) ++ | (isp_reg_readl(OMAP3_ISP_IOMEM_SBL, ISPSBL_CCDC_WR_3) & ++ ISPSBL_CCDC_WR_0_DATA_READY); ++} ++EXPORT_SYMBOL(ispccdc_sbl_busy); ++ ++/** ++ * ispccdc_busy - Gets busy state of the CCDC. ++ **/ ++int ispccdc_busy(void) ++{ ++ return isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_PCR) & ++ ISPCCDC_PCR_BUSY; ++} ++EXPORT_SYMBOL(ispccdc_busy); ++ ++/** ++ * ispccdc_save_context - Saves the values of the CCDC module registers ++ **/ ++void ispccdc_save_context(void) ++{ ++ DPRINTK_ISPCCDC("Saving context\n"); ++ isp_save_context(ispccdc_reg_list); ++} ++EXPORT_SYMBOL(ispccdc_save_context); ++ ++/** ++ * ispccdc_restore_context - Restores the values of the CCDC module registers ++ **/ ++void ispccdc_restore_context(void) ++{ ++ DPRINTK_ISPCCDC("Restoring context\n"); ++ isp_restore_context(ispccdc_reg_list); ++} ++EXPORT_SYMBOL(ispccdc_restore_context); ++ ++/** ++ * ispccdc_print_status - Prints the values of the CCDC Module registers ++ * ++ * Also prints other debug information stored in the CCDC module. ++ **/ ++void ispccdc_print_status(void) ++{ ++ if (!is_ispccdc_debug_enabled()) ++ return; ++ ++ DPRINTK_ISPCCDC("Module in use =%d\n", ispccdc_obj.ccdc_inuse); ++ DPRINTK_ISPCCDC("Accepted CCDC Input (width = %d,Height = %d)\n", ++ ispccdc_obj.ccdcin_w, ++ ispccdc_obj.ccdcin_h); ++ DPRINTK_ISPCCDC("Accepted CCDC Output (width = %d,Height = %d)\n", ++ ispccdc_obj.ccdcout_w, ++ ispccdc_obj.ccdcout_h); ++ DPRINTK_ISPCCDC("###CCDC PCR=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_PCR)); ++ DPRINTK_ISPCCDC("ISP_CTRL =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_CTRL)); ++ switch (ispccdc_obj.ccdc_inpfmt) { ++ case CCDC_RAW: ++ DPRINTK_ISPCCDC("ccdc input format is CCDC_RAW\n"); ++ break; ++ case CCDC_YUV_SYNC: ++ DPRINTK_ISPCCDC("ccdc input format is CCDC_YUV_SYNC\n"); ++ break; ++ case CCDC_YUV_BT: ++ DPRINTK_ISPCCDC("ccdc input format is CCDC_YUV_BT\n"); ++ break; ++ } ++ ++ switch (ispccdc_obj.ccdc_outfmt) { ++ case CCDC_OTHERS_VP: ++ DPRINTK_ISPCCDC("ccdc output format is CCDC_OTHERS_VP\n"); ++ break; ++ case CCDC_OTHERS_MEM: ++ DPRINTK_ISPCCDC("ccdc output format is CCDC_OTHERS_MEM\n"); ++ break; ++ case CCDC_YUV_RSZ: ++ DPRINTK_ISPCCDC("ccdc output format is CCDC_YUV_RSZ\n"); ++ break; ++ } ++ ++ DPRINTK_ISPCCDC("###ISP_CTRL in ccdc =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_CTRL)); ++ DPRINTK_ISPCCDC("###ISP_IRQ0ENABLE in ccdc =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE)); ++ DPRINTK_ISPCCDC("###ISP_IRQ0STATUS in ccdc =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS)); ++ DPRINTK_ISPCCDC("###CCDC SYN_MODE=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE)); ++ DPRINTK_ISPCCDC("###CCDC HORZ_INFO=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_HORZ_INFO)); ++ DPRINTK_ISPCCDC("###CCDC VERT_START=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_VERT_START)); ++ DPRINTK_ISPCCDC("###CCDC VERT_LINES=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_VERT_LINES)); ++ DPRINTK_ISPCCDC("###CCDC CULLING=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CULLING)); ++ DPRINTK_ISPCCDC("###CCDC HSIZE_OFF=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_HSIZE_OFF)); ++ DPRINTK_ISPCCDC("###CCDC SDOFST=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDOFST)); ++ DPRINTK_ISPCCDC("###CCDC SDR_ADDR=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDR_ADDR)); ++ DPRINTK_ISPCCDC("###CCDC CLAMP=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CLAMP)); ++ DPRINTK_ISPCCDC("###CCDC COLPTN=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_COLPTN)); ++ DPRINTK_ISPCCDC("###CCDC CFG=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG)); ++ DPRINTK_ISPCCDC("###CCDC VP_OUT=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_VP_OUT)); ++ DPRINTK_ISPCCDC("###CCDC_SDR_ADDR= 0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDR_ADDR)); ++ DPRINTK_ISPCCDC("###CCDC FMTCFG=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG)); ++ DPRINTK_ISPCCDC("###CCDC FMT_HORZ=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_HORZ)); ++ DPRINTK_ISPCCDC("###CCDC FMT_VERT=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMT_VERT)); ++ DPRINTK_ISPCCDC("###CCDC LSC_CONFIG=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_LSC_CONFIG)); ++ DPRINTK_ISPCCDC("###CCDC LSC_INIT=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_LSC_INITIAL)); ++ DPRINTK_ISPCCDC("###CCDC LSC_TABLE BASE=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_LSC_TABLE_BASE)); ++ DPRINTK_ISPCCDC("###CCDC LSC TABLE OFFSET=0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_LSC_TABLE_OFFSET)); ++} ++EXPORT_SYMBOL(ispccdc_print_status); ++ ++/** ++ * isp_ccdc_init - CCDC module initialization. ++ * ++ * Always returns 0 ++ **/ ++int __init isp_ccdc_init(void) ++{ ++ ispccdc_obj.ccdc_inuse = 0; ++ ispccdc_config_crop(0, 0, 0, 0); ++ mutex_init(&ispccdc_obj.mutexlock); ++ ++ if (is_isplsc_activated()) { ++ lsc_gain_table_tmp = kmalloc(LSC_TABLE_INIT_SIZE, GFP_KERNEL | ++ GFP_DMA); ++ memset(lsc_gain_table_tmp, 0x40, LSC_TABLE_INIT_SIZE); ++ lsc_config.initial_x = 0; ++ lsc_config.initial_y = 0; ++ lsc_config.gain_mode_n = 0x6; ++ lsc_config.gain_mode_m = 0x6; ++ lsc_config.gain_format = 0x4; ++ lsc_config.offset = 0x60; ++ lsc_config.size = LSC_TABLE_INIT_SIZE; ++ ispccdc_obj.lsc_enable = 1; ++ } ++ ++ return 0; ++} ++ ++/** ++ * isp_ccdc_cleanup - CCDC module cleanup. ++ **/ ++void isp_ccdc_cleanup(void) ++{ ++ if (is_isplsc_activated()) { ++ ispccdc_free_lsc(); ++ kfree(lsc_gain_table_tmp); ++ } ++ ++ if (fpc_table_add_m != 0) { ++ ispmmu_kunmap(fpc_table_add_m); ++ kfree(fpc_table_add); ++ } ++} +diff --git a/drivers/media/video/isp/ispccdc.h b/drivers/media/video/isp/ispccdc.h +new file mode 100644 +index 0000000..4ef40a6 +--- /dev/null ++++ b/drivers/media/video/isp/ispccdc.h +@@ -0,0 +1,209 @@ ++/* ++ * ispccdc.h ++ * ++ * Driver header file for CCDC module in TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * Contributors: ++ * Senthilvadivu Guruswamy ++ * Pallavi Kulkarni ++ * Sergio Aguirre ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#ifndef OMAP_ISP_CCDC_H ++#define OMAP_ISP_CCDC_H ++ ++#include ++ ++#define is_isplsc_activated() 1 ++ ++/* Enumeration constants for CCDC input output format */ ++enum ccdc_input { ++ CCDC_RAW, ++ CCDC_YUV_SYNC, ++ CCDC_YUV_BT, ++ CCDC_OTHERS ++}; ++ ++enum ccdc_output { ++ CCDC_YUV_RSZ, ++ CCDC_YUV_MEM_RSZ, ++ CCDC_OTHERS_VP, ++ CCDC_OTHERS_MEM, ++ CCDC_OTHERS_VP_MEM ++}; ++ ++/* Enumeration constants for the sync interface parameters */ ++enum inpmode { ++ RAW, ++ YUV16, ++ YUV8 ++}; ++enum datasize { ++ DAT8, ++ DAT10, ++ DAT11, ++ DAT12 ++}; ++ ++ ++/** ++ * struct ispccdc_syncif - Structure for Sync Interface between sensor and CCDC ++ * @ccdc_mastermode: Master mode. 1 - Master, 0 - Slave. ++ * @fldstat: Field state. 0 - Odd Field, 1 - Even Field. ++ * @ipmod: Input mode. ++ * @datsz: Data size. ++ * @fldmode: 0 - Progressive, 1 - Interlaced. ++ * @datapol: 0 - Positive, 1 - Negative. ++ * @fldpol: 0 - Positive, 1 - Negative. ++ * @hdpol: 0 - Positive, 1 - Negative. ++ * @vdpol: 0 - Positive, 1 - Negative. ++ * @fldout: 0 - Input, 1 - Output. ++ * @hs_width: Width of the Horizontal Sync pulse, used for HS/VS Output. ++ * @vs_width: Width of the Vertical Sync pulse, used for HS/VS Output. ++ * @ppln: Number of pixels per line, used for HS/VS Output. ++ * @hlprf: Number of half lines per frame, used for HS/VS Output. ++ * @bt_r656_en: 1 - Enable ITU-R BT656 mode, 0 - Sync mode. ++ */ ++struct ispccdc_syncif { ++ u8 ccdc_mastermode; ++ u8 fldstat; ++ enum inpmode ipmod; ++ enum datasize datsz; ++ u8 fldmode; ++ u8 datapol; ++ u8 fldpol; ++ u8 hdpol; ++ u8 vdpol; ++ u8 fldout; ++ u8 hs_width; ++ u8 vs_width; ++ u8 ppln; ++ u8 hlprf; ++ u8 bt_r656_en; ++}; ++ ++/** ++ * ispccdc_refmt - Structure for Reformatter parameters ++ * @lnalt: Line alternating mode enable. 0 - Enable, 1 - Disable. ++ * @lnum: Number of output lines from 1 input line. 1 to 4 lines. ++ * @plen_even: Number of program entries in even line minus 1. ++ * @plen_odd: Number of program entries in odd line minus 1. ++ * @prgeven0: Program entries 0-7 for even lines register ++ * @prgeven1: Program entries 8-15 for even lines register ++ * @prgodd0: Program entries 0-7 for odd lines register ++ * @prgodd1: Program entries 8-15 for odd lines register ++ * @fmtaddr0: Output line in which the original pixel is to be placed ++ * @fmtaddr1: Output line in which the original pixel is to be placed ++ * @fmtaddr2: Output line in which the original pixel is to be placed ++ * @fmtaddr3: Output line in which the original pixel is to be placed ++ * @fmtaddr4: Output line in which the original pixel is to be placed ++ * @fmtaddr5: Output line in which the original pixel is to be placed ++ * @fmtaddr6: Output line in which the original pixel is to be placed ++ * @fmtaddr7: Output line in which the original pixel is to be placed ++ */ ++struct ispccdc_refmt { ++ u8 lnalt; ++ u8 lnum; ++ u8 plen_even; ++ u8 plen_odd; ++ u32 prgeven0; ++ u32 prgeven1; ++ u32 prgodd0; ++ u32 prgodd1; ++ u32 fmtaddr0; ++ u32 fmtaddr1; ++ u32 fmtaddr2; ++ u32 fmtaddr3; ++ u32 fmtaddr4; ++ u32 fmtaddr5; ++ u32 fmtaddr6; ++ u32 fmtaddr7; ++}; ++ ++int ispccdc_request(void); ++ ++int ispccdc_free(void); ++ ++int ispccdc_config_datapath(enum ccdc_input input, enum ccdc_output output); ++ ++void ispccdc_config_crop(u32 left, u32 top, u32 height, u32 width); ++ ++void ispccdc_config_sync_if(struct ispccdc_syncif syncif); ++ ++int ispccdc_config_black_clamp(struct ispccdc_bclamp bclamp); ++ ++void ispccdc_enable_black_clamp(u8 enable); ++ ++int ispccdc_config_fpc(struct ispccdc_fpc fpc); ++ ++void ispccdc_enable_fpc(u8 enable); ++ ++void ispccdc_config_black_comp(struct ispccdc_blcomp blcomp); ++ ++void ispccdc_config_vp(struct ispccdc_vp vp); ++ ++void ispccdc_enable_vp(u8 enable); ++ ++void ispccdc_config_reformatter(struct ispccdc_refmt refmt); ++ ++void ispccdc_enable_reformatter(u8 enable); ++ ++void ispccdc_config_culling(struct ispccdc_culling culling); ++ ++void ispccdc_enable_lpf(u8 enable); ++ ++void ispccdc_config_alaw(enum alaw_ipwidth ipwidth); ++ ++void ispccdc_enable_alaw(u8 enable); ++ ++int ispccdc_load_lsc(u8 *table_addr, u32 table_size); ++ ++void ispccdc_config_lsc(struct ispccdc_lsc_config *lsc_cfg); ++ ++void ispccdc_enable_lsc(u8 enable); ++ ++void ispccdc_lsc_error_handler(void); ++ ++void ispccdc_config_imgattr(u32 colptn); ++ ++void ispccdc_config_shadow_registers(void); ++ ++int ispccdc_try_size(u32 input_w, u32 input_h, u32 *output_w, u32 *output_h); ++ ++int ispccdc_config_size(u32 input_w, u32 input_h, u32 output_w, u32 output_h); ++ ++int ispccdc_config_outlineoffset(u32 offset, u8 oddeven, u8 numlines); ++ ++int ispccdc_set_outaddr(u32 addr); ++ ++void ispccdc_enable(u8 enable); ++ ++void ispccdc_suspend(void); ++ ++void ispccdc_resume(void); ++ ++int ispccdc_sbl_busy(void); ++ ++int ispccdc_busy(void); ++ ++void ispccdc_save_context(void); ++ ++void ispccdc_restore_context(void); ++ ++void ispccdc_print_status(void); ++ ++int omap34xx_isp_ccdc_config(void *userspace_add); ++ ++void ispccdc_set_wenlog(u32 wenlog); ++ ++#endif /* OMAP_ISP_CCDC_H */ +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0005-omap3isp-Add-ISP-backend-PRV-and-RSZ.patch b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0005-omap3isp-Add-ISP-backend-PRV-and-RSZ.patch new file mode 100644 index 000000000..c549eadc8 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0005-omap3isp-Add-ISP-backend-PRV-and-RSZ.patch @@ -0,0 +1,3413 @@ +From 926b51afea146826c8076e5fb305eaa0332399b4 Mon Sep 17 00:00:00 2001 +From: Sakari Ailus +Date: Tue, 10 Mar 2009 10:49:02 +0200 +Subject: [PATCH] omap3isp: Add ISP backend (PRV and RSZ) + +Signed-off-by: Sakari Ailus +--- + drivers/media/video/isp/isppreview.c | 1929 ++++++++++++++++++++++++++++++++++ + drivers/media/video/isp/isppreview.h | 354 +++++++ + drivers/media/video/isp/ispresizer.c | 928 ++++++++++++++++ + drivers/media/video/isp/ispresizer.h | 158 +++ + 4 files changed, 3369 insertions(+), 0 deletions(-) + create mode 100644 drivers/media/video/isp/isppreview.c + create mode 100644 drivers/media/video/isp/isppreview.h + create mode 100644 drivers/media/video/isp/ispresizer.c + create mode 100644 drivers/media/video/isp/ispresizer.h + +diff --git a/drivers/media/video/isp/isppreview.c b/drivers/media/video/isp/isppreview.c +new file mode 100644 +index 0000000..17f1abc +--- /dev/null ++++ b/drivers/media/video/isp/isppreview.c +@@ -0,0 +1,1929 @@ ++/* ++ * isppreview.c ++ * ++ * Driver Library for Preview module in TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * Contributors: ++ * Senthilvadivu Guruswamy ++ * Pallavi Kulkarni ++ * Sergio Aguirre ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#include ++#include ++#include ++ ++#include "isp.h" ++#include "ispreg.h" ++#include "isppreview.h" ++ ++static struct ispprev_nf prev_nf_t; ++static struct prev_params *params; ++static int rg_update, gg_update, bg_update, nf_enable, nf_update; ++ ++/* Structure for saving/restoring preview module registers */ ++static struct isp_reg ispprev_reg_list[] = { ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_HORZ_INFO, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_VERT_INFO, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_RSDR_ADDR, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_RADR_OFFSET, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_DSDR_ADDR, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_DRKF_OFFSET, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_WSDR_ADDR, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_WADD_OFFSET, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_HMED, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_NF, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_WB_DGAIN, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_WBGAIN, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_WBSEL, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_CFA, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_BLKADJOFF, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT1, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT2, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT3, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT4, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT5, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF1, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF2, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC0, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC1, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC2, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC_OFFSET, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_CSUP, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_SETUP_YC, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR0, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR1, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR2, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR3, 0x0000}, ++ {OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, 0x0000}, ++ {0, ISP_TOK_TERM, 0x0000} ++}; ++ ++ ++/* Default values in Office Flourescent Light for RGBtoRGB Blending */ ++static struct ispprev_rgbtorgb flr_rgb2rgb = { ++ { /* RGB-RGB Matrix */ ++ {0x01E2, 0x0F30, 0x0FEE}, ++ {0x0F9B, 0x01AC, 0x0FB9}, ++ {0x0FE0, 0x0EC0, 0x0260} ++ }, /* RGB Offset */ ++ {0x0000, 0x0000, 0x0000} ++}; ++ ++/* Default values in Office Flourescent Light for RGB to YUV Conversion*/ ++static struct ispprev_csc flr_prev_csc[] = { ++ { ++ { /* CSC Coef Matrix */ ++ {66, 129, 25}, ++ {-38, -75, 112}, ++ {112, -94 , -18} ++ }, /* CSC Offset */ ++ {0x0, 0x0, 0x0} ++ }, ++ { ++ { /* CSC Coef Matrix BW */ ++ {66, 129, 25}, ++ {0, 0, 0}, ++ {0, 0, 0} ++ }, /* CSC Offset */ ++ {0x0, 0x0, 0x0} ++ }, ++ { ++ { /* CSC Coef Matrix Sepia */ ++ {19, 38, 7}, ++ {0, 0, 0}, ++ {0, 0, 0} ++ }, /* CSC Offset */ ++ {0x0, 0xE7, 0x14} ++ } ++}; ++ ++ ++/* Default values in Office Flourescent Light for CFA Gradient*/ ++#define FLR_CFA_GRADTHRS_HORZ 0x28 ++#define FLR_CFA_GRADTHRS_VERT 0x28 ++ ++/* Default values in Office Flourescent Light for Chroma Suppression*/ ++#define FLR_CSUP_GAIN 0x0D ++#define FLR_CSUP_THRES 0xEB ++ ++/* Default values in Office Flourescent Light for Noise Filter*/ ++#define FLR_NF_STRGTH 0x03 ++ ++/* Default values in Office Flourescent Light for White Balance*/ ++#define FLR_WBAL_DGAIN 0x100 ++#define FLR_WBAL_COEF0 0x20 ++#define FLR_WBAL_COEF1 0x29 ++#define FLR_WBAL_COEF2 0x2d ++#define FLR_WBAL_COEF3 0x20 ++ ++#define FLR_WBAL_COEF0_ES1 0x20 ++#define FLR_WBAL_COEF1_ES1 0x23 ++#define FLR_WBAL_COEF2_ES1 0x39 ++#define FLR_WBAL_COEF3_ES1 0x20 ++ ++/* Default values in Office Flourescent Light for Black Adjustment*/ ++#define FLR_BLKADJ_BLUE 0x0 ++#define FLR_BLKADJ_GREEN 0x0 ++#define FLR_BLKADJ_RED 0x0 ++ ++static int update_color_matrix; ++ ++/** ++ * struct isp_prev - Structure for storing ISP Preview module information ++ * @prev_inuse: Flag to determine if CCDC has been reserved or not (0 or 1). ++ * @prevout_w: Preview output width. ++ * @prevout_h: Preview output height. ++ * @previn_w: Preview input width. ++ * @previn_h: Preview input height. ++ * @prev_inpfmt: Preview input format. ++ * @prev_outfmt: Preview output format. ++ * @hmed_en: Horizontal median filter enable. ++ * @nf_en: Noise filter enable. ++ * @dcor_en: Defect correction enable. ++ * @cfa_en: Color Filter Array (CFA) interpolation enable. ++ * @csup_en: Chrominance suppression enable. ++ * @yenh_en: Luma enhancement enable. ++ * @fmtavg: Number of horizontal pixels to average in input formatter. The ++ * input width should be a multiple of this number. ++ * @brightness: Brightness in preview module. ++ * @contrast: Contrast in preview module. ++ * @color: Color effect in preview module. ++ * @cfafmt: Color Filter Array (CFA) Format. ++ * @ispprev_mutex: Mutex for isp preview. ++ * ++ * This structure is used to store the OMAP ISP Preview module Information. ++ */ ++static struct isp_prev { ++ int pm_state; ++ u8 prev_inuse; ++ u32 prevout_w; ++ u32 prevout_h; ++ u32 previn_w; ++ u32 previn_h; ++ enum preview_input prev_inpfmt; ++ enum preview_output prev_outfmt; ++ u8 hmed_en; ++ u8 nf_en; ++ u8 dcor_en; ++ u8 cfa_en; ++ u8 csup_en; ++ u8 yenh_en; ++ u8 fmtavg; ++ u8 brightness; ++ u8 contrast; ++ enum v4l2_colorfx color; ++ enum cfa_fmt cfafmt; ++ struct mutex ispprev_mutex; /* For checking/modifying prev_inuse */ ++ u32 sph; ++ u32 slv; ++} ispprev_obj; ++ ++/* Saved parameters */ ++static struct prev_params *prev_config_params; ++ ++/* ++ * Coeficient Tables for the submodules in Preview. ++ * Array is initialised with the values from.the tables text file. ++ */ ++ ++/* ++ * CFA Filter Coefficient Table ++ * ++ */ ++static u32 cfa_coef_table[] = { ++#include "cfa_coef_table.h" ++}; ++ ++/* ++ * Gamma Correction Table - Red ++ */ ++static u32 redgamma_table[] = { ++#include "redgamma_table.h" ++}; ++ ++/* ++ * Gamma Correction Table - Green ++ */ ++static u32 greengamma_table[] = { ++#include "greengamma_table.h" ++}; ++ ++/* ++ * Gamma Correction Table - Blue ++ */ ++static u32 bluegamma_table[] = { ++#include "bluegamma_table.h" ++}; ++ ++/* ++ * Noise Filter Threshold table ++ */ ++static u32 noise_filter_table[] = { ++#include "noise_filter_table.h" ++}; ++ ++/* ++ * Luminance Enhancement Table ++ */ ++static u32 luma_enhance_table[] = { ++#include "luma_enhance_table.h" ++}; ++ ++/** ++ * omap34xx_isp_preview_config - Abstraction layer Preview configuration. ++ * @userspace_add: Pointer from Userspace to structure with flags and data to ++ * update. ++ **/ ++int omap34xx_isp_preview_config(void *userspace_add) ++{ ++ struct ispprev_hmed prev_hmed_t; ++ struct ispprev_cfa prev_cfa_t; ++ struct ispprev_csup csup_t; ++ struct ispprev_wbal prev_wbal_t; ++ struct ispprev_blkadj prev_blkadj_t; ++ struct ispprev_rgbtorgb rgb2rgb_t; ++ struct ispprev_csc prev_csc_t; ++ struct ispprev_yclimit yclimit_t; ++ struct ispprev_dcor prev_dcor_t; ++ struct ispprv_update_config *preview_struct; ++ struct isptables_update isp_table_update; ++ int yen_t[ISPPRV_YENH_TBL_SIZE]; ++ ++ if (userspace_add == NULL) ++ return -EINVAL; ++ ++ preview_struct = userspace_add; ++ ++ if (ISP_ABS_PREV_LUMAENH & preview_struct->flag) { ++ if (ISP_ABS_PREV_LUMAENH & preview_struct->update) { ++ if (copy_from_user(yen_t, preview_struct->yen, ++ sizeof(yen_t))) ++ goto err_copy_from_user; ++ isppreview_config_luma_enhancement(yen_t); ++ } ++ params->features |= PREV_LUMA_ENHANCE; ++ } else if (ISP_ABS_PREV_LUMAENH & preview_struct->update) ++ params->features &= ~PREV_LUMA_ENHANCE; ++ ++ if (ISP_ABS_PREV_INVALAW & preview_struct->flag) { ++ isppreview_enable_invalaw(1); ++ params->features |= PREV_INVERSE_ALAW; ++ } else { ++ isppreview_enable_invalaw(0); ++ params->features &= ~PREV_INVERSE_ALAW; ++ } ++ ++ if (ISP_ABS_PREV_HRZ_MED & preview_struct->flag) { ++ if (ISP_ABS_PREV_HRZ_MED & preview_struct->update) { ++ if (copy_from_user(&prev_hmed_t, ++ (struct ispprev_hmed *) ++ preview_struct->prev_hmed, ++ sizeof(struct ispprev_hmed))) ++ goto err_copy_from_user; ++ isppreview_config_hmed(prev_hmed_t); ++ } ++ isppreview_enable_hmed(1); ++ params->features |= PREV_HORZ_MEDIAN_FILTER; ++ } else if (ISP_ABS_PREV_HRZ_MED & preview_struct->update) { ++ isppreview_enable_hmed(0); ++ params->features &= ~PREV_HORZ_MEDIAN_FILTER; ++ } ++ ++ if (ISP_ABS_PREV_CFA & preview_struct->flag) { ++ if (ISP_ABS_PREV_CFA & preview_struct->update) { ++ if (copy_from_user(&prev_cfa_t, ++ (struct ispprev_cfa *) ++ preview_struct->prev_cfa, ++ sizeof(struct ispprev_cfa))) ++ goto err_copy_from_user; ++ ++ isppreview_config_cfa(prev_cfa_t); ++ } ++ isppreview_enable_cfa(1); ++ params->features |= PREV_CFA; ++ } else if (ISP_ABS_PREV_CFA & preview_struct->update) { ++ isppreview_enable_cfa(0); ++ params->features &= ~PREV_CFA; ++ } ++ ++ if (ISP_ABS_PREV_CHROMA_SUPP & preview_struct->flag) { ++ if (ISP_ABS_PREV_CHROMA_SUPP & preview_struct->update) { ++ if (copy_from_user(&csup_t, ++ (struct ispprev_csup *) ++ preview_struct->csup, ++ sizeof(struct ispprev_csup))) ++ goto err_copy_from_user; ++ isppreview_config_chroma_suppression(csup_t); ++ } ++ isppreview_enable_chroma_suppression(1); ++ params->features |= PREV_CHROMA_SUPPRESS; ++ } else if (ISP_ABS_PREV_CHROMA_SUPP & preview_struct->update) { ++ isppreview_enable_chroma_suppression(0); ++ params->features &= ~PREV_CHROMA_SUPPRESS; ++ } ++ ++ if (ISP_ABS_PREV_WB & preview_struct->update) { ++ if (copy_from_user(&prev_wbal_t, (struct ispprev_wbal *) ++ preview_struct->prev_wbal, ++ sizeof(struct ispprev_wbal))) ++ goto err_copy_from_user; ++ isppreview_config_whitebalance(prev_wbal_t); ++ } ++ ++ if (ISP_ABS_PREV_BLKADJ & preview_struct->update) { ++ if (copy_from_user(&prev_blkadj_t, (struct ispprev_blkadjl *) ++ preview_struct->prev_blkadj, ++ sizeof(struct ispprev_blkadj))) ++ goto err_copy_from_user; ++ isppreview_config_blkadj(prev_blkadj_t); ++ } ++ ++ if (ISP_ABS_PREV_RGB2RGB & preview_struct->update) { ++ if (copy_from_user(&rgb2rgb_t, (struct ispprev_rgbtorgb *) ++ preview_struct->rgb2rgb, ++ sizeof(struct ispprev_rgbtorgb))) ++ goto err_copy_from_user; ++ isppreview_config_rgb_blending(rgb2rgb_t); ++ } ++ ++ if (ISP_ABS_PREV_COLOR_CONV & preview_struct->update) { ++ if (copy_from_user(&prev_csc_t, (struct ispprev_csc *) ++ preview_struct->prev_csc, ++ sizeof(struct ispprev_csc))) ++ goto err_copy_from_user; ++ isppreview_config_rgb_to_ycbcr(prev_csc_t); ++ } ++ ++ if (ISP_ABS_PREV_YC_LIMIT & preview_struct->update) { ++ if (copy_from_user(&yclimit_t, (struct ispprev_yclimit *) ++ preview_struct->yclimit, ++ sizeof(struct ispprev_yclimit))) ++ goto err_copy_from_user; ++ isppreview_config_yc_range(yclimit_t); ++ } ++ ++ if (ISP_ABS_PREV_DEFECT_COR & preview_struct->flag) { ++ if (ISP_ABS_PREV_DEFECT_COR & preview_struct->update) { ++ if (copy_from_user(&prev_dcor_t, ++ (struct ispprev_dcor *) ++ preview_struct->prev_dcor, ++ sizeof(struct ispprev_dcor))) ++ goto err_copy_from_user; ++ isppreview_config_dcor(prev_dcor_t); ++ } ++ isppreview_enable_dcor(1); ++ params->features |= PREV_DEFECT_COR; ++ } else if (ISP_ABS_PREV_DEFECT_COR & preview_struct->update) { ++ isppreview_enable_dcor(0); ++ params->features &= ~PREV_DEFECT_COR; ++ } ++ ++ if (ISP_ABS_PREV_GAMMABYPASS & preview_struct->flag) { ++ isppreview_enable_gammabypass(1); ++ params->features |= PREV_GAMMA_BYPASS; ++ } else { ++ isppreview_enable_gammabypass(0); ++ params->features &= ~PREV_GAMMA_BYPASS; ++ } ++ ++ isp_table_update.update = preview_struct->update; ++ isp_table_update.flag = preview_struct->flag; ++ isp_table_update.prev_nf = preview_struct->prev_nf; ++ isp_table_update.red_gamma = preview_struct->red_gamma; ++ isp_table_update.green_gamma = preview_struct->green_gamma; ++ isp_table_update.blue_gamma = preview_struct->blue_gamma; ++ ++ if (omap34xx_isp_tables_update(&isp_table_update)) ++ goto err_copy_from_user; ++ ++ return 0; ++ ++err_copy_from_user: ++ printk(KERN_ERR "Preview Config: Copy From User Error\n"); ++ return -EFAULT; ++} ++EXPORT_SYMBOL_GPL(omap34xx_isp_preview_config); ++ ++/** ++ * omap34xx_isp_tables_update - Abstraction layer Tables update. ++ * @isptables_struct: Pointer from Userspace to structure with flags and table ++ * data to update. ++ **/ ++int omap34xx_isp_tables_update(struct isptables_update *isptables_struct) ++{ ++ ++ if (ISP_ABS_TBL_NF & isptables_struct->flag) { ++ nf_enable = 1; ++ params->features |= PREV_NOISE_FILTER; ++ if (ISP_ABS_TBL_NF & isptables_struct->update) { ++ if (copy_from_user(&prev_nf_t, (struct ispprev_nf *) ++ isptables_struct->prev_nf, ++ sizeof(struct ispprev_nf))) ++ goto err_copy_from_user; ++ ++ nf_update = 1; ++ } else ++ nf_update = 0; ++ } else { ++ nf_enable = 0; ++ params->features &= ~PREV_NOISE_FILTER; ++ if (ISP_ABS_TBL_NF & isptables_struct->update) ++ nf_update = 1; ++ else ++ nf_update = 0; ++ } ++ ++ if (ISP_ABS_TBL_REDGAMMA & isptables_struct->update) { ++ if (copy_from_user(redgamma_table, isptables_struct->red_gamma, ++ sizeof(redgamma_table))) { ++ goto err_copy_from_user; ++ } ++ rg_update = 1; ++ } else ++ rg_update = 0; ++ ++ if (ISP_ABS_TBL_GREENGAMMA & isptables_struct->update) { ++ if (copy_from_user(greengamma_table, ++ isptables_struct->green_gamma, ++ sizeof(greengamma_table))) ++ goto err_copy_from_user; ++ gg_update = 1; ++ } else ++ gg_update = 0; ++ ++ if (ISP_ABS_TBL_BLUEGAMMA & isptables_struct->update) { ++ if (copy_from_user(bluegamma_table, ++ isptables_struct->blue_gamma, ++ sizeof(bluegamma_table))) { ++ goto err_copy_from_user; ++ } ++ bg_update = 1; ++ } else ++ bg_update = 0; ++ ++ return 0; ++ ++err_copy_from_user: ++ printk(KERN_ERR "Preview Tables:Copy From User Error\n"); ++ return -EFAULT; ++} ++ ++/** ++ * isppreview_config_shadow_registers - Program shadow registers for preview. ++ * ++ * Allows user to program shadow registers associated with preview module. ++ **/ ++void isppreview_config_shadow_registers() ++{ ++ u8 current_brightness_contrast; ++ int ctr, prv_disabled; ++ ++ isppreview_query_brightness(¤t_brightness_contrast); ++ if (current_brightness_contrast != ++ (ispprev_obj.brightness * ISPPRV_BRIGHT_UNITS)) { ++ DPRINTK_ISPPREV(" Changing Brightness level to %d\n", ++ ispprev_obj.brightness); ++ isppreview_config_brightness(ispprev_obj.brightness * ++ ISPPRV_BRIGHT_UNITS); ++ } ++ ++ isppreview_query_contrast(¤t_brightness_contrast); ++ if (current_brightness_contrast != ++ (ispprev_obj.contrast * ISPPRV_CONTRAST_UNITS)) { ++ DPRINTK_ISPPREV(" Changing Contrast level to %d\n", ++ ispprev_obj.contrast); ++ isppreview_config_contrast(ispprev_obj.contrast * ++ ISPPRV_CONTRAST_UNITS); ++ } ++ if (update_color_matrix) { ++ isppreview_config_rgb_to_ycbcr(flr_prev_csc[ispprev_obj.color]); ++ update_color_matrix = 0; ++ } ++ if (gg_update || rg_update || bg_update || nf_update) { ++ isppreview_enable(0); ++ prv_disabled = 1; ++ } ++ ++ if (gg_update) { ++ isp_reg_writel(ISPPRV_TBL_ADDR_GREEN_G_START, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); ++ ++ for (ctr = 0; ctr < ISP_GAMMA_TABLE_SIZE; ctr++) { ++ isp_reg_writel(greengamma_table[ctr], ++ OMAP3_ISP_IOMEM_PREV, ++ ISPPRV_SET_TBL_DATA); ++ } ++ gg_update = 0; ++ } ++ ++ if (rg_update) { ++ isp_reg_writel(ISPPRV_TBL_ADDR_RED_G_START, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); ++ ++ for (ctr = 0; ctr < ISP_GAMMA_TABLE_SIZE; ctr++) { ++ isp_reg_writel(redgamma_table[ctr], ++ OMAP3_ISP_IOMEM_PREV, ++ ISPPRV_SET_TBL_DATA); ++ } ++ rg_update = 0; ++ } ++ ++ if (bg_update) { ++ isp_reg_writel(ISPPRV_TBL_ADDR_BLUE_G_START, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); ++ ++ for (ctr = 0; ctr < ISP_GAMMA_TABLE_SIZE; ctr++) { ++ isp_reg_writel(bluegamma_table[ctr], ++ OMAP3_ISP_IOMEM_PREV, ++ ISPPRV_SET_TBL_DATA); ++ } ++ bg_update = 0; ++ } ++ ++ if (nf_update && nf_enable) { ++ isp_reg_writel(0xC00, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); ++ isp_reg_writel(prev_nf_t.spread, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_NF); ++ for (ctr = 0; ctr < ISPPRV_NF_TBL_SIZE; ctr++) { ++ isp_reg_writel(prev_nf_t.table[ctr], ++ OMAP3_ISP_IOMEM_PREV, ++ ISPPRV_SET_TBL_DATA); ++ } ++ isppreview_enable_noisefilter(1); ++ nf_update = 0; ++ } ++ ++ if (~nf_update && nf_enable) ++ isppreview_enable_noisefilter(1); ++ ++ if (nf_update && ~nf_enable) ++ isppreview_enable_noisefilter(0); ++ ++ if (prv_disabled) { ++ isppreview_enable(1); ++ prv_disabled = 0; ++ } ++} ++EXPORT_SYMBOL_GPL(isppreview_config_shadow_registers); ++ ++/** ++ * isppreview_request - Reserves the preview module. ++ * ++ * Returns 0 if successful, or -EBUSY if the module was already reserved. ++ **/ ++int isppreview_request() ++{ ++ mutex_lock(&ispprev_obj.ispprev_mutex); ++ if (ispprev_obj.prev_inuse) { ++ mutex_unlock(&ispprev_obj.ispprev_mutex); ++ printk(KERN_ERR "ISP_ERR : Preview Module Busy\n"); ++ return -EBUSY; ++ } ++ ispprev_obj.prev_inuse = 1; ++ mutex_unlock(&ispprev_obj.ispprev_mutex); ++ isp_reg_or(OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, ISPCTRL_PREV_RAM_EN | ++ ISPCTRL_PREV_CLK_EN | ++ ISPCTRL_SBL_WR1_RAM_EN); ++ return 0; ++} ++EXPORT_SYMBOL_GPL(isppreview_request); ++ ++/** ++ * isppreview_free - Frees the preview module. ++ * ++ * Returns 0 if successful, or -EINVAL if the module was already freed. ++ **/ ++int isppreview_free() ++{ ++ mutex_lock(&ispprev_obj.ispprev_mutex); ++ if (ispprev_obj.prev_inuse) { ++ ispprev_obj.prev_inuse = 0; ++ mutex_unlock(&ispprev_obj.ispprev_mutex); ++ isp_reg_and(OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, ++ ~(ISPCTRL_PREV_CLK_EN | ++ ISPCTRL_PREV_RAM_EN | ++ ISPCTRL_SBL_WR1_RAM_EN)); ++ return 0; ++ } else { ++ mutex_unlock(&ispprev_obj.ispprev_mutex); ++ DPRINTK_ISPPREV("ISP_ERR : Preview Module already freed\n"); ++ return -EINVAL; ++ } ++ ++} ++EXPORT_SYMBOL_GPL(isppreview_free); ++ ++/** isppreview_config_datapath - Specifies input and output modules for Preview ++ * @input: Indicates the module that gives the image to preview. ++ * @output: Indicates the module to which the preview outputs to. ++ * ++ * Configures the default configuration for the CCDC to work with. ++ * ++ * The valid values for the input are PRV_RAW_CCDC (0), PRV_RAW_MEM (1), ++ * PRV_RGBBAYERCFA (2), PRV_COMPCFA (3), PRV_CCDC_DRKF (4), PRV_OTHERS (5). ++ * ++ * The valid values for the output are PREVIEW_RSZ (0), PREVIEW_MEM (1). ++ * ++ * Returns 0 if successful, or -EINVAL if wrong input or output values are ++ * specified. ++ **/ ++int isppreview_config_datapath(enum preview_input input, ++ enum preview_output output) ++{ ++ u32 pcr = 0; ++ u8 enable = 0; ++ struct prev_params *params = prev_config_params; ++ struct ispprev_yclimit yclimit; ++ ++ pcr = isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR); ++ ++ switch (input) { ++ case PRV_RAW_CCDC: ++ pcr &= ~ISPPRV_PCR_SOURCE; ++ pcr &= ~ISPPRV_PCR_ONESHOT; ++ ispprev_obj.prev_inpfmt = PRV_RAW_CCDC; ++ break; ++ case PRV_RAW_MEM: ++ pcr |= ISPPRV_PCR_SOURCE; ++ pcr |= ISPPRV_PCR_ONESHOT; ++ ispprev_obj.prev_inpfmt = PRV_RAW_MEM; ++ break; ++ case PRV_CCDC_DRKF: ++ pcr |= ISPPRV_PCR_DRKFCAP; ++ pcr |= ISPPRV_PCR_ONESHOT; ++ ispprev_obj.prev_inpfmt = PRV_CCDC_DRKF; ++ break; ++ case PRV_COMPCFA: ++ ispprev_obj.prev_inpfmt = PRV_COMPCFA; ++ break; ++ case PRV_OTHERS: ++ ispprev_obj.prev_inpfmt = PRV_OTHERS; ++ break; ++ case PRV_RGBBAYERCFA: ++ ispprev_obj.prev_inpfmt = PRV_RGBBAYERCFA; ++ break; ++ default: ++ printk(KERN_ERR "ISP_ERR : Wrong Input\n"); ++ return -EINVAL; ++ }; ++ ++ switch (output) { ++ case PREVIEW_RSZ: ++ pcr |= ISPPRV_PCR_RSZPORT; ++ pcr &= ~ISPPRV_PCR_SDRPORT; ++ break; ++ case PREVIEW_MEM: ++ pcr &= ~ISPPRV_PCR_RSZPORT; ++ pcr |= ISPPRV_PCR_SDRPORT; ++ break; ++ default: ++ printk(KERN_ERR "ISP_ERR : Wrong Output\n"); ++ return -EINVAL; ++ } ++ ispprev_obj.prev_outfmt = output; ++ ++ isp_reg_writel(pcr, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR); ++ ++ isppreview_config_ycpos(params->pix_fmt); ++ ++ if (params->cfa.cfa_table != NULL) ++ isppreview_config_cfa(params->cfa); ++ if (params->csup.hypf_en == 1) ++ isppreview_config_chroma_suppression(params->csup); ++ if (params->ytable != NULL) ++ isppreview_config_luma_enhancement(params->ytable); ++ ++ if (params->gtable.redtable != NULL) ++ isppreview_config_gammacorrn(params->gtable); ++ ++ enable = (params->features & PREV_CFA) ? 1 : 0; ++ isppreview_enable_cfa(enable); ++ ++ enable = (params->features & PREV_CHROMA_SUPPRESS) ? 1 : 0; ++ isppreview_enable_chroma_suppression(enable); ++ ++ enable = (params->features & PREV_LUMA_ENHANCE) ? 1 : 0; ++ isppreview_enable_luma_enhancement(enable); ++ ++ enable = (params->features & PREV_NOISE_FILTER) ? 1 : 0; ++ if (enable) ++ isppreview_config_noisefilter(params->nf); ++ isppreview_enable_noisefilter(enable); ++ ++ enable = (params->features & PREV_DEFECT_COR) ? 1 : 0; ++ if (enable) ++ isppreview_config_dcor(params->dcor); ++ isppreview_enable_dcor(enable); ++ ++ enable = (params->features & PREV_GAMMA_BYPASS) ? 1 : 0; ++ isppreview_enable_gammabypass(enable); ++ ++ isppreview_config_whitebalance(params->wbal); ++ isppreview_config_blkadj(params->blk_adj); ++ isppreview_config_rgb_blending(params->rgb2rgb); ++ isppreview_config_rgb_to_ycbcr(params->rgb2ycbcr); ++ ++ isppreview_config_contrast(params->contrast * ISPPRV_CONTRAST_UNITS); ++ isppreview_config_brightness(params->brightness * ISPPRV_BRIGHT_UNITS); ++ ++ yclimit.minC = ISPPRV_YC_MIN; ++ yclimit.maxC = ISPPRV_YC_MAX; ++ yclimit.minY = ISPPRV_YC_MIN; ++ yclimit.maxY = ISPPRV_YC_MAX; ++ isppreview_config_yc_range(yclimit); ++ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(isppreview_config_datapath); ++ ++/** ++ * isppreview_set_skip - Set the number of rows/columns that should be skipped. ++ * h - Start Pixel Horizontal. ++ * v - Start Line Vertical. ++ **/ ++void isppreview_set_skip(u32 h, u32 v) ++{ ++ ispprev_obj.sph = h; ++ ispprev_obj.slv = v; ++} ++EXPORT_SYMBOL_GPL(isppreview_set_skip); ++ ++/** ++ * isppreview_config_ycpos - Configure byte layout of YUV image. ++ * @mode: Indicates the required byte layout. ++ **/ ++void isppreview_config_ycpos(enum preview_ycpos_mode mode) ++{ ++ u32 pcr = isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR); ++ pcr &= ~ISPPRV_PCR_YCPOS_CrYCbY; ++ pcr |= (mode << ISPPRV_PCR_YCPOS_SHIFT); ++ isp_reg_writel(pcr, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR); ++} ++EXPORT_SYMBOL_GPL(isppreview_config_ycpos); ++ ++/** ++ * isppreview_config_averager - Enable / disable / configure averager ++ * @average: Average value to be configured. ++ **/ ++void isppreview_config_averager(u8 average) ++{ ++ int reg = 0; ++ ++ reg = AVE_ODD_PIXEL_DIST | AVE_EVEN_PIXEL_DIST | average; ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE); ++} ++EXPORT_SYMBOL_GPL(isppreview_config_averager); ++ ++/** ++ * isppreview_enable_invalaw - Enable/Disable Inverse A-Law module in Preview. ++ * @enable: 1 - Reverse the A-Law done in CCDC. ++ **/ ++void isppreview_enable_invalaw(u8 enable) ++{ ++ u32 pcr_val = 0; ++ pcr_val = isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR); ++ ++ if (enable) { ++ isp_reg_writel(pcr_val | ISPPRV_PCR_WIDTH | ISPPRV_PCR_INVALAW, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR); ++ } else { ++ isp_reg_writel(pcr_val & ++ ~(ISPPRV_PCR_WIDTH | ISPPRV_PCR_INVALAW), ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR); ++ } ++} ++EXPORT_SYMBOL_GPL(isppreview_enable_invalaw); ++ ++/** ++ * isppreview_enable_drkframe - Enable/Disable of the darkframe subtract. ++ * @enable: 1 - Acquires memory bandwidth since the pixels in each frame is ++ * subtracted with the pixels in the current frame. ++ * ++ * The proccess is applied for each captured frame. ++ **/ ++void isppreview_enable_drkframe(u8 enable) ++{ ++ if (enable) ++ isp_reg_or(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ISPPRV_PCR_DRKFEN); ++ else { ++ isp_reg_and(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ++ ~ISPPRV_PCR_DRKFEN); ++ } ++} ++EXPORT_SYMBOL_GPL(isppreview_enable_drkframe); ++ ++/** ++ * isppreview_enable_shadcomp - Enables/Disables the shading compensation. ++ * @enable: 1 - Enables the shading compensation. ++ * ++ * If dark frame subtract won't be used, then enable this shading ++ * compensation. ++ **/ ++void isppreview_enable_shadcomp(u8 enable) ++{ ++ ++ if (enable) { ++ isp_reg_or(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ++ ISPPRV_PCR_SCOMP_EN); ++ isppreview_enable_drkframe(1); ++ } else { ++ isp_reg_and(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ++ ~ISPPRV_PCR_SCOMP_EN); ++ } ++} ++EXPORT_SYMBOL_GPL(isppreview_enable_shadcomp); ++ ++/** ++ * isppreview_config_drkf_shadcomp - Configures shift value in shading comp. ++ * @scomp_shtval: 3bit value of shift used in shading compensation. ++ **/ ++void isppreview_config_drkf_shadcomp(u8 scomp_shtval) ++{ ++ u32 pcr_val = isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR); ++ ++ pcr_val &= ISPPRV_PCR_SCOMP_SFT_MASK; ++ isp_reg_writel(pcr_val | (scomp_shtval << ISPPRV_PCR_SCOMP_SFT_SHIFT), ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR); ++} ++EXPORT_SYMBOL_GPL(isppreview_config_drkf_shadcomp); ++ ++/** ++ * isppreview_enable_hmed - Enables/Disables of the Horizontal Median Filter. ++ * @enable: 1 - Enables Horizontal Median Filter. ++ **/ ++void isppreview_enable_hmed(u8 enable) ++{ ++ if (enable) ++ isp_reg_or(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ISPPRV_PCR_HMEDEN); ++ else { ++ isp_reg_and(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ++ ~ISPPRV_PCR_HMEDEN); ++ } ++ ispprev_obj.hmed_en = enable ? 1 : 0; ++} ++EXPORT_SYMBOL_GPL(isppreview_enable_hmed); ++ ++/** ++ * isppreview_config_hmed - Configures the Horizontal Median Filter. ++ * @prev_hmed: Structure containing the odd and even distance between the ++ * pixels in the image along with the filter threshold. ++ **/ ++void isppreview_config_hmed(struct ispprev_hmed prev_hmed) ++{ ++ ++ u32 odddist = 0; ++ u32 evendist = 0; ++ ++ if (prev_hmed.odddist == 1) ++ odddist = ~ISPPRV_HMED_ODDDIST; ++ else ++ odddist = ISPPRV_HMED_ODDDIST; ++ ++ if (prev_hmed.evendist == 1) ++ evendist = ~ISPPRV_HMED_EVENDIST; ++ else ++ evendist = ISPPRV_HMED_EVENDIST; ++ ++ isp_reg_writel(odddist | evendist | (prev_hmed.thres << ++ ISPPRV_HMED_THRESHOLD_SHIFT), ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_HMED); ++ ++} ++EXPORT_SYMBOL_GPL(isppreview_config_hmed); ++ ++/** ++ * isppreview_config_noisefilter - Configures the Noise Filter. ++ * @prev_nf: Structure containing the noisefilter table, strength to be used ++ * for the noise filter and the defect correction enable flag. ++ **/ ++void isppreview_config_noisefilter(struct ispprev_nf prev_nf) ++{ ++ int i = 0; ++ ++ isp_reg_writel(prev_nf.spread, OMAP3_ISP_IOMEM_PREV, ISPPRV_NF); ++ isp_reg_writel(ISPPRV_NF_TABLE_ADDR, OMAP3_ISP_IOMEM_PREV, ++ ISPPRV_SET_TBL_ADDR); ++ for (i = 0; i < ISPPRV_NF_TBL_SIZE; i++) { ++ isp_reg_writel(prev_nf.table[i], OMAP3_ISP_IOMEM_PREV, ++ ISPPRV_SET_TBL_DATA); ++ } ++} ++EXPORT_SYMBOL_GPL(isppreview_config_noisefilter); ++ ++/** ++ * isppreview_config_dcor - Configures the defect correction ++ * @prev_nf: Structure containing the defect correction structure ++ **/ ++void isppreview_config_dcor(struct ispprev_dcor prev_dcor) ++{ ++ if (prev_dcor.couplet_mode_en) { ++ isp_reg_writel(prev_dcor.detect_correct[0], ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR0); ++ isp_reg_writel(prev_dcor.detect_correct[1], ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR1); ++ isp_reg_writel(prev_dcor.detect_correct[2], ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR2); ++ isp_reg_writel(prev_dcor.detect_correct[3], ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_CDC_THR3); ++ isp_reg_or(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ISPPRV_PCR_DCCOUP); ++ } else { ++ isp_reg_and(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ++ ~ISPPRV_PCR_DCCOUP); ++ } ++} ++EXPORT_SYMBOL_GPL(isppreview_config_dcor); ++ ++/** ++ * isppreview_config_cfa - Configures the CFA Interpolation parameters. ++ * @prev_cfa: Structure containing the CFA interpolation table, CFA format ++ * in the image, vertical and horizontal gradient threshold. ++ **/ ++void isppreview_config_cfa(struct ispprev_cfa prev_cfa) ++{ ++ int i = 0; ++ ++ ispprev_obj.cfafmt = prev_cfa.cfafmt; ++ ++ isp_reg_or(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ++ (prev_cfa.cfafmt << ISPPRV_PCR_CFAFMT_SHIFT)); ++ ++ isp_reg_writel( ++ (prev_cfa.cfa_gradthrs_vert << ISPPRV_CFA_GRADTH_VER_SHIFT) | ++ (prev_cfa.cfa_gradthrs_horz << ISPPRV_CFA_GRADTH_HOR_SHIFT), ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_CFA); ++ ++ isp_reg_writel(ISPPRV_CFA_TABLE_ADDR, OMAP3_ISP_IOMEM_PREV, ++ ISPPRV_SET_TBL_ADDR); ++ ++ for (i = 0; i < ISPPRV_CFA_TBL_SIZE; i++) { ++ isp_reg_writel(prev_cfa.cfa_table[i], ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA); ++ } ++} ++EXPORT_SYMBOL_GPL(isppreview_config_cfa); ++ ++/** ++ * isppreview_config_gammacorrn - Configures the Gamma Correction table values ++ * @gtable: Structure containing the table for red, blue, green gamma table. ++ **/ ++void isppreview_config_gammacorrn(struct ispprev_gtable gtable) ++{ ++ int i = 0; ++ ++ isp_reg_writel(ISPPRV_REDGAMMA_TABLE_ADDR, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); ++ for (i = 0; i < ISPPRV_GAMMA_TBL_SIZE; i++) { ++ isp_reg_writel(gtable.redtable[i], ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA); ++ } ++ ++ isp_reg_writel(ISPPRV_GREENGAMMA_TABLE_ADDR, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); ++ for (i = 0; i < ISPPRV_GAMMA_TBL_SIZE; i++) { ++ isp_reg_writel(gtable.greentable[i], ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA); ++ } ++ ++ isp_reg_writel(ISPPRV_BLUEGAMMA_TABLE_ADDR, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); ++ for (i = 0; i < ISPPRV_GAMMA_TBL_SIZE; i++) { ++ isp_reg_writel(gtable.bluetable[i], ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA); ++ } ++} ++EXPORT_SYMBOL_GPL(isppreview_config_gammacorrn); ++ ++/** ++ * isppreview_config_luma_enhancement - Sets the Luminance Enhancement table. ++ * @ytable: Structure containing the table for Luminance Enhancement table. ++ **/ ++void isppreview_config_luma_enhancement(u32 *ytable) ++{ ++ int i = 0; ++ ++ isp_reg_writel(ISPPRV_YENH_TABLE_ADDR, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); ++ for (i = 0; i < ISPPRV_YENH_TBL_SIZE; i++) { ++ isp_reg_writel(ytable[i], ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA); ++ } ++} ++EXPORT_SYMBOL_GPL(isppreview_config_luma_enhancement); ++ ++/** ++ * isppreview_config_chroma_suppression - Configures the Chroma Suppression. ++ * @csup: Structure containing the threshold value for suppression ++ * and the hypass filter enable flag. ++ **/ ++void isppreview_config_chroma_suppression(struct ispprev_csup csup) ++{ ++ isp_reg_writel(csup.gain | (csup.thres << ISPPRV_CSUP_THRES_SHIFT) | ++ (csup.hypf_en << ISPPRV_CSUP_HPYF_SHIFT), ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_CSUP); ++} ++EXPORT_SYMBOL_GPL(isppreview_config_chroma_suppression); ++ ++/** ++ * isppreview_enable_noisefilter - Enables/Disables the Noise Filter. ++ * @enable: 1 - Enables the Noise Filter. ++ **/ ++void isppreview_enable_noisefilter(u8 enable) ++{ ++ if (enable) ++ isp_reg_or(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ISPPRV_PCR_NFEN); ++ else ++ isp_reg_and(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ~ISPPRV_PCR_NFEN); ++ ispprev_obj.nf_en = enable ? 1 : 0; ++} ++EXPORT_SYMBOL_GPL(isppreview_enable_noisefilter); ++ ++/** ++ * isppreview_enable_dcor - Enables/Disables the defect correction. ++ * @enable: 1 - Enables the defect correction. ++ **/ ++void isppreview_enable_dcor(u8 enable) ++{ ++ if (enable) ++ isp_reg_or(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ISPPRV_PCR_DCOREN); ++ else { ++ isp_reg_and(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ++ ~ISPPRV_PCR_DCOREN); ++ } ++ ispprev_obj.dcor_en = enable ? 1 : 0; ++} ++EXPORT_SYMBOL_GPL(isppreview_enable_dcor); ++ ++/** ++ * isppreview_enable_cfa - Enable/Disable the CFA Interpolation. ++ * @enable: 1 - Enables the CFA. ++ **/ ++void isppreview_enable_cfa(u8 enable) ++{ ++ if (enable) ++ isp_reg_or(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ISPPRV_PCR_CFAEN); ++ else { ++ isp_reg_and(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ++ ~ISPPRV_PCR_CFAEN); ++ } ++ ispprev_obj.cfa_en = enable ? 1 : 0; ++} ++EXPORT_SYMBOL_GPL(isppreview_enable_cfa); ++ ++/** ++ * isppreview_enable_gammabypass - Enables/Disables the GammaByPass ++ * @enable: 1 - Bypasses Gamma - 10bit input is cropped to 8MSB. ++ * 0 - Goes through Gamma Correction. input and output is 10bit. ++ **/ ++void isppreview_enable_gammabypass(u8 enable) ++{ ++ if (enable) { ++ isp_reg_or(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ++ ISPPRV_PCR_GAMMA_BYPASS); ++ } else { ++ isp_reg_and(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ++ ~ISPPRV_PCR_GAMMA_BYPASS); ++ } ++} ++EXPORT_SYMBOL_GPL(isppreview_enable_gammabypass); ++ ++/** ++ * isppreview_enable_luma_enhancement - Enables/Disables Luminance Enhancement ++ * @enable: 1 - Enable the Luminance Enhancement. ++ **/ ++void isppreview_enable_luma_enhancement(u8 enable) ++{ ++ if (enable) { ++ isp_reg_or(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ++ ISPPRV_PCR_YNENHEN); ++ } else { ++ isp_reg_and(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ++ ~ISPPRV_PCR_YNENHEN); ++ } ++ ispprev_obj.yenh_en = enable ? 1 : 0; ++} ++EXPORT_SYMBOL_GPL(isppreview_enable_luma_enhancement); ++ ++/** ++ * isppreview_enable_chroma_suppression - Enables/Disables Chrominance Suppr. ++ * @enable: 1 - Enable the Chrominance Suppression. ++ **/ ++void isppreview_enable_chroma_suppression(u8 enable) ++{ ++ if (enable) ++ isp_reg_or(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ISPPRV_PCR_SUPEN); ++ else { ++ isp_reg_and(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ++ ~ISPPRV_PCR_SUPEN); ++ } ++ ispprev_obj.csup_en = enable ? 1 : 0; ++} ++EXPORT_SYMBOL_GPL(isppreview_enable_chroma_suppression); ++ ++/** ++ * isppreview_config_whitebalance - Configures the White Balance parameters. ++ * @prev_wbal: Structure containing the digital gain and white balance ++ * coefficient. ++ * ++ * Coefficient matrix always with default values. ++ **/ ++void isppreview_config_whitebalance(struct ispprev_wbal prev_wbal) ++{ ++ u32 val; ++ ++ isp_reg_writel(prev_wbal.dgain, OMAP3_ISP_IOMEM_PREV, ISPPRV_WB_DGAIN); ++ ++ val = prev_wbal.coef0 << ISPPRV_WBGAIN_COEF0_SHIFT; ++ val |= prev_wbal.coef1 << ISPPRV_WBGAIN_COEF1_SHIFT; ++ val |= prev_wbal.coef2 << ISPPRV_WBGAIN_COEF2_SHIFT; ++ val |= prev_wbal.coef3 << ISPPRV_WBGAIN_COEF3_SHIFT; ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_PREV, ISPPRV_WBGAIN); ++ ++ isp_reg_writel(ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N0_0_SHIFT | ++ ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N0_1_SHIFT | ++ ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N0_2_SHIFT | ++ ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N0_3_SHIFT | ++ ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N1_0_SHIFT | ++ ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N1_1_SHIFT | ++ ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N1_2_SHIFT | ++ ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N1_3_SHIFT | ++ ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N2_0_SHIFT | ++ ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N2_1_SHIFT | ++ ISPPRV_WBSEL_COEF0 << ISPPRV_WBSEL_N2_2_SHIFT | ++ ISPPRV_WBSEL_COEF1 << ISPPRV_WBSEL_N2_3_SHIFT | ++ ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N3_0_SHIFT | ++ ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N3_1_SHIFT | ++ ISPPRV_WBSEL_COEF2 << ISPPRV_WBSEL_N3_2_SHIFT | ++ ISPPRV_WBSEL_COEF3 << ISPPRV_WBSEL_N3_3_SHIFT, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_WBSEL); ++} ++EXPORT_SYMBOL_GPL(isppreview_config_whitebalance); ++ ++/** ++ * isppreview_config_whitebalance2 - Configures the White Balance parameters. ++ * @prev_wbal: Structure containing the digital gain and white balance ++ * coefficient. ++ * ++ * Coefficient matrix can be changed. ++ **/ ++void isppreview_config_whitebalance2(struct prev_white_balance prev_wbal) ++{ ++ isp_reg_writel(prev_wbal.wb_dgain, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_WB_DGAIN); ++ isp_reg_writel(prev_wbal.wb_gain[0] | ++ prev_wbal.wb_gain[1] << ISPPRV_WBGAIN_COEF1_SHIFT | ++ prev_wbal.wb_gain[2] << ISPPRV_WBGAIN_COEF2_SHIFT | ++ prev_wbal.wb_gain[3] << ISPPRV_WBGAIN_COEF3_SHIFT, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_WBGAIN); ++ ++ isp_reg_writel( ++ prev_wbal.wb_coefmatrix[0][0] << ISPPRV_WBSEL_N0_0_SHIFT | ++ prev_wbal.wb_coefmatrix[0][1] << ISPPRV_WBSEL_N0_1_SHIFT | ++ prev_wbal.wb_coefmatrix[0][2] << ISPPRV_WBSEL_N0_2_SHIFT | ++ prev_wbal.wb_coefmatrix[0][3] << ISPPRV_WBSEL_N0_3_SHIFT | ++ prev_wbal.wb_coefmatrix[1][0] << ISPPRV_WBSEL_N1_0_SHIFT | ++ prev_wbal.wb_coefmatrix[1][1] << ISPPRV_WBSEL_N1_1_SHIFT | ++ prev_wbal.wb_coefmatrix[1][2] << ISPPRV_WBSEL_N1_2_SHIFT | ++ prev_wbal.wb_coefmatrix[1][3] << ISPPRV_WBSEL_N1_3_SHIFT | ++ prev_wbal.wb_coefmatrix[2][0] << ISPPRV_WBSEL_N2_0_SHIFT | ++ prev_wbal.wb_coefmatrix[2][1] << ISPPRV_WBSEL_N2_1_SHIFT | ++ prev_wbal.wb_coefmatrix[2][2] << ISPPRV_WBSEL_N2_2_SHIFT | ++ prev_wbal.wb_coefmatrix[2][3] << ISPPRV_WBSEL_N2_3_SHIFT | ++ prev_wbal.wb_coefmatrix[3][0] << ISPPRV_WBSEL_N3_0_SHIFT | ++ prev_wbal.wb_coefmatrix[3][1] << ISPPRV_WBSEL_N3_1_SHIFT | ++ prev_wbal.wb_coefmatrix[3][2] << ISPPRV_WBSEL_N3_2_SHIFT | ++ prev_wbal.wb_coefmatrix[3][3] << ISPPRV_WBSEL_N3_3_SHIFT, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_WBSEL); ++} ++EXPORT_SYMBOL_GPL(isppreview_config_whitebalance2); ++ ++/** ++ * isppreview_config_blkadj - Configures the Black Adjustment parameters. ++ * @prev_blkadj: Structure containing the black adjustment towards red, green, ++ * blue. ++ **/ ++void isppreview_config_blkadj(struct ispprev_blkadj prev_blkadj) ++{ ++ isp_reg_writel(prev_blkadj.blue | ++ (prev_blkadj.green << ISPPRV_BLKADJOFF_G_SHIFT) | ++ (prev_blkadj.red << ISPPRV_BLKADJOFF_R_SHIFT), ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_BLKADJOFF); ++} ++EXPORT_SYMBOL_GPL(isppreview_config_blkadj); ++ ++/** ++ * isppreview_config_rgb_blending - Configures the RGB-RGB Blending matrix. ++ * @rgb2rgb: Structure containing the rgb to rgb blending matrix and the rgb ++ * offset. ++ **/ ++void isppreview_config_rgb_blending(struct ispprev_rgbtorgb rgb2rgb) ++{ ++ u32 val = 0; ++ ++ val = (rgb2rgb.matrix[0][0] & 0xfff) << ISPPRV_RGB_MAT1_MTX_RR_SHIFT; ++ val |= (rgb2rgb.matrix[0][1] & 0xfff) << ISPPRV_RGB_MAT1_MTX_GR_SHIFT; ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT1); ++ ++ val = (rgb2rgb.matrix[0][2] & 0xfff) << ISPPRV_RGB_MAT2_MTX_BR_SHIFT; ++ val |= (rgb2rgb.matrix[1][0] & 0xfff) << ISPPRV_RGB_MAT2_MTX_RG_SHIFT; ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT2); ++ ++ val = (rgb2rgb.matrix[1][1] & 0xfff) << ISPPRV_RGB_MAT3_MTX_GG_SHIFT; ++ val |= (rgb2rgb.matrix[1][2] & 0xfff) << ISPPRV_RGB_MAT3_MTX_BG_SHIFT; ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT3); ++ ++ val = (rgb2rgb.matrix[2][0] & 0xfff) << ISPPRV_RGB_MAT4_MTX_RB_SHIFT; ++ val |= (rgb2rgb.matrix[2][1] & 0xfff) << ISPPRV_RGB_MAT4_MTX_GB_SHIFT; ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT4); ++ ++ val = (rgb2rgb.matrix[2][2] & 0xfff) << ISPPRV_RGB_MAT5_MTX_BB_SHIFT; ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT5); ++ ++ val = (rgb2rgb.offset[0] & 0x3ff) << ISPPRV_RGB_OFF1_MTX_OFFG_SHIFT; ++ val |= (rgb2rgb.offset[1] & 0x3ff) << ISPPRV_RGB_OFF1_MTX_OFFR_SHIFT; ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF1); ++ ++ val = (rgb2rgb.offset[2] & 0x3ff) << ISPPRV_RGB_OFF2_MTX_OFFB_SHIFT; ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF2); ++} ++EXPORT_SYMBOL_GPL(isppreview_config_rgb_blending); ++ ++/** ++ * Configures the RGB-YCbYCr conversion matrix ++ * @prev_csc: Structure containing the RGB to YCbYCr matrix and the ++ * YCbCr offset. ++ **/ ++void isppreview_config_rgb_to_ycbcr(struct ispprev_csc prev_csc) ++{ ++ u32 val = 0; ++ ++ val = (prev_csc.matrix[0][0] & 0x3ff) << ISPPRV_CSC0_RY_SHIFT; ++ val |= (prev_csc.matrix[0][1] & 0x3ff) << ISPPRV_CSC0_GY_SHIFT; ++ val |= (prev_csc.matrix[0][2] & 0x3ff) << ISPPRV_CSC0_BY_SHIFT; ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC0); ++ ++ val = (prev_csc.matrix[1][0] & 0x3ff) << ISPPRV_CSC1_RCB_SHIFT; ++ val |= (prev_csc.matrix[1][1] & 0x3ff) << ISPPRV_CSC1_GCB_SHIFT; ++ val |= (prev_csc.matrix[1][2] & 0x3ff) << ISPPRV_CSC1_BCB_SHIFT; ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC1); ++ ++ val = (prev_csc.matrix[2][0] & 0x3ff) << ISPPRV_CSC2_RCR_SHIFT; ++ val |= (prev_csc.matrix[2][1] & 0x3ff) << ISPPRV_CSC2_GCR_SHIFT; ++ val |= (prev_csc.matrix[2][2] & 0x3ff) << ISPPRV_CSC2_BCR_SHIFT; ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC2); ++ ++ val = (prev_csc.offset[0] & 0xff) << ISPPRV_CSC_OFFSET_CR_SHIFT; ++ val |= (prev_csc.offset[1] & 0xff) << ISPPRV_CSC_OFFSET_CB_SHIFT; ++ val |= (prev_csc.offset[2] & 0xff) << ISPPRV_CSC_OFFSET_Y_SHIFT; ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC_OFFSET); ++} ++EXPORT_SYMBOL_GPL(isppreview_config_rgb_to_ycbcr); ++ ++/** ++ * isppreview_query_contrast - Query the contrast. ++ * @contrast: Pointer to hold the current programmed contrast value. ++ **/ ++void isppreview_query_contrast(u8 *contrast) ++{ ++ u32 brt_cnt_val = 0; ++ ++ brt_cnt_val = isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT); ++ *contrast = (brt_cnt_val >> ISPPRV_CNT_BRT_CNT_SHIFT) & 0xff; ++ DPRINTK_ISPPREV(" Current brt cnt value in hw is %x\n", brt_cnt_val); ++} ++EXPORT_SYMBOL_GPL(isppreview_query_contrast); ++ ++/** ++ * isppreview_update_contrast - Updates the contrast. ++ * @contrast: Pointer to hold the current programmed contrast value. ++ * ++ * Value should be programmed before enabling the module. ++ **/ ++void isppreview_update_contrast(u8 *contrast) ++{ ++ ispprev_obj.contrast = *contrast; ++} ++EXPORT_SYMBOL_GPL(isppreview_update_contrast); ++ ++/** ++ * isppreview_config_contrast - Configures the Contrast. ++ * @contrast: 8 bit value in U8Q4 format. ++ * ++ * Value should be programmed before enabling the module. ++ **/ ++void isppreview_config_contrast(u8 contrast) ++{ ++ u32 brt_cnt_val = 0; ++ ++ brt_cnt_val = isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT); ++ brt_cnt_val &= ~(0xff << ISPPRV_CNT_BRT_CNT_SHIFT); ++ contrast &= 0xff; ++ isp_reg_writel(brt_cnt_val | contrast << ISPPRV_CNT_BRT_CNT_SHIFT, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT); ++} ++EXPORT_SYMBOL_GPL(isppreview_config_contrast); ++ ++/** ++ * isppreview_get_contrast_range - Gets the range contrast value. ++ * @min_contrast: Pointer to hold the minimum Contrast value. ++ * @max_contrast: Pointer to hold the maximum Contrast value. ++ **/ ++void isppreview_get_contrast_range(u8 *min_contrast, u8 *max_contrast) ++{ ++ *min_contrast = ISPPRV_CONTRAST_MIN; ++ *max_contrast = ISPPRV_CONTRAST_MAX; ++} ++EXPORT_SYMBOL_GPL(isppreview_get_contrast_range); ++ ++/** ++ * isppreview_update_brightness - Updates the brightness in preview module. ++ * @brightness: Pointer to hold the current programmed brightness value. ++ * ++ **/ ++void isppreview_update_brightness(u8 *brightness) ++{ ++ ispprev_obj.brightness = *brightness; ++} ++EXPORT_SYMBOL_GPL(isppreview_update_brightness); ++ ++/** ++ * isppreview_config_brightness - Configures the brightness. ++ * @contrast: 8bitvalue in U8Q0 format. ++ **/ ++void isppreview_config_brightness(u8 brightness) ++{ ++ u32 brt_cnt_val = 0; ++ ++ DPRINTK_ISPPREV("\tConfiguring brightness in ISP: %d\n", brightness); ++ brt_cnt_val = isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT); ++ brt_cnt_val &= ~(0xff << ISPPRV_CNT_BRT_BRT_SHIFT); ++ brightness &= 0xff; ++ isp_reg_writel(brt_cnt_val | brightness << ISPPRV_CNT_BRT_BRT_SHIFT, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT); ++} ++EXPORT_SYMBOL_GPL(isppreview_config_brightness); ++ ++/** ++ * isppreview_query_brightness - Query the brightness. ++ * @brightness: Pointer to hold the current programmed brightness value. ++ **/ ++void isppreview_query_brightness(u8 *brightness) ++{ ++ *brightness = isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT); ++} ++EXPORT_SYMBOL_GPL(isppreview_query_brightness); ++ ++/** ++ * isppreview_get_brightness_range - Gets the range brightness value ++ * @min_brightness: Pointer to hold the minimum brightness value ++ * @max_brightness: Pointer to hold the maximum brightness value ++ **/ ++void isppreview_get_brightness_range(u8 *min_brightness, u8 *max_brightness) ++{ ++ *min_brightness = ISPPRV_BRIGHT_MIN; ++ *max_brightness = ISPPRV_BRIGHT_MAX; ++} ++EXPORT_SYMBOL_GPL(isppreview_get_brightness_range); ++ ++/** ++ * isppreview_set_color - Sets the color effect. ++ * @mode: Indicates the required color effect. ++ **/ ++void isppreview_set_color(u8 *mode) ++{ ++ ispprev_obj.color = *mode; ++ update_color_matrix = 1; ++} ++EXPORT_SYMBOL_GPL(isppreview_set_color); ++ ++/** ++ * isppreview_get_color - Gets the current color effect. ++ * @mode: Indicates the current color effect. ++ **/ ++void isppreview_get_color(u8 *mode) ++{ ++ *mode = ispprev_obj.color; ++} ++EXPORT_SYMBOL_GPL(isppreview_get_color); ++ ++/** ++ * isppreview_config_yc_range - Configures the max and min Y and C values. ++ * @yclimit: Structure containing the range of Y and C values. ++ **/ ++void isppreview_config_yc_range(struct ispprev_yclimit yclimit) ++{ ++ isp_reg_writel(yclimit.maxC << ISPPRV_SETUP_YC_MAXC_SHIFT | ++ yclimit.maxY << ISPPRV_SETUP_YC_MAXY_SHIFT | ++ yclimit.minC << ISPPRV_SETUP_YC_MINC_SHIFT | ++ yclimit.minY << ISPPRV_SETUP_YC_MINY_SHIFT, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_SETUP_YC); ++} ++EXPORT_SYMBOL_GPL(isppreview_config_yc_range); ++ ++/** ++ * isppreview_try_size - Calculates output dimensions with the modules enabled. ++ * @input_w: input width for the preview in number of pixels per line ++ * @input_h: input height for the preview in number of lines ++ * @output_w: output width from the preview in number of pixels per line ++ * @output_h: output height for the preview in number of lines ++ * ++ * Calculates the number of pixels cropped in the submodules that are enabled, ++ * Fills up the output width height variables in the isp_prev structure. ++ **/ ++int isppreview_try_size(u32 input_w, u32 input_h, u32 *output_w, u32 *output_h) ++{ ++ u32 prevout_w = input_w; ++ u32 prevout_h = input_h; ++ u32 div = 0; ++ int max_out; ++ ++ ispprev_obj.previn_w = input_w; ++ ispprev_obj.previn_h = input_h; ++ ++ if (input_w < 32 || input_h < 32) { ++ printk(KERN_ERR "ISP_ERR : preview does not support " ++ "width < 16 or height < 32 \n"); ++ return -EINVAL; ++ } ++ if (omap_rev() == OMAP3430_REV_ES1_0) ++ max_out = ISPPRV_MAXOUTPUT_WIDTH; ++ else ++ max_out = ISPPRV_MAXOUTPUT_WIDTH_ES2; ++ ++ ispprev_obj.fmtavg = 0; ++ ++ if (input_w > max_out) { ++ div = (input_w/max_out); ++ if (div >= 2 && div < 4) { ++ ispprev_obj.fmtavg = 1; ++ prevout_w /= 2; ++ } else if (div >= 4 && div < 8) { ++ ispprev_obj.fmtavg = 2; ++ prevout_w /= 4; ++ } else if (div >= 8) { ++ ispprev_obj.fmtavg = 3; ++ prevout_w /= 8; ++ } ++ } ++ ++ if (ispprev_obj.hmed_en) ++ prevout_w -= 4; ++ if (ispprev_obj.nf_en) { ++ prevout_w -= 4; ++ prevout_h -= 4; ++ } ++ if (ispprev_obj.cfa_en) { ++ switch (ispprev_obj.cfafmt) { ++ case CFAFMT_BAYER: ++ case CFAFMT_SONYVGA: ++ prevout_w -= 4; ++ prevout_h -= 4; ++ break; ++ case CFAFMT_RGBFOVEON: ++ case CFAFMT_RRGGBBFOVEON: ++ case CFAFMT_DNSPL: ++ case CFAFMT_HONEYCOMB: ++ prevout_h -= 2; ++ break; ++ }; ++ } ++ if (ispprev_obj.yenh_en || ispprev_obj.csup_en) ++ prevout_w -= 2; ++ ++ /* Start at the correct row/column by skipping ++ * a Sensor specific amount. ++ */ ++ prevout_w -= ispprev_obj.sph; ++ prevout_h -= ispprev_obj.slv; ++ ++ ++ if (prevout_w % 2) ++ prevout_w -= 1; ++ ++ if (ispprev_obj.prev_outfmt == PREVIEW_MEM) { ++ if (((prevout_w * 2) & ISP_32B_BOUNDARY_OFFSET) != ++ (prevout_w * 2)) { ++ prevout_w = ((prevout_w * 2) & ++ ISP_32B_BOUNDARY_OFFSET) / 2; ++ } ++ } ++ *output_w = prevout_w; ++ ispprev_obj.prevout_w = prevout_w; ++ *output_h = prevout_h; ++ ispprev_obj.prevout_h = prevout_h; ++ return 0; ++} ++EXPORT_SYMBOL_GPL(isppreview_try_size); ++ ++/** ++ * isppreview_config_size - Sets the size of ISP preview output. ++ * @input_w: input width for the preview in number of pixels per line ++ * @input_h: input height for the preview in number of lines ++ * @output_w: output width from the preview in number of pixels per line ++ * @output_h: output height for the preview in number of lines ++ * ++ * Configures the appropriate values stored in the isp_prev structure to ++ * HORZ/VERT_INFO. Configures PRV_AVE if needed for downsampling as calculated ++ * in trysize. ++ **/ ++int isppreview_config_size(u32 input_w, u32 input_h, u32 output_w, u32 output_h) ++{ ++ u32 prevsdroff; ++ ++ if ((output_w != ispprev_obj.prevout_w) || ++ (output_h != ispprev_obj.prevout_h)) { ++ printk(KERN_ERR "ISP_ERR : isppreview_try_size should " ++ "be called before config size\n"); ++ return -EINVAL; ++ } ++ ++ isp_reg_writel((ispprev_obj.sph << ISPPRV_HORZ_INFO_SPH_SHIFT) | ++ (ispprev_obj.previn_w - 1), ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_HORZ_INFO); ++ isp_reg_writel((ispprev_obj.slv << ISPPRV_VERT_INFO_SLV_SHIFT) | ++ (ispprev_obj.previn_h - 2), ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_VERT_INFO); ++ ++ if (ispprev_obj.cfafmt == CFAFMT_BAYER) ++ isp_reg_writel(ISPPRV_AVE_EVENDIST_2 << ++ ISPPRV_AVE_EVENDIST_SHIFT | ++ ISPPRV_AVE_ODDDIST_2 << ++ ISPPRV_AVE_ODDDIST_SHIFT | ++ ispprev_obj.fmtavg, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE); ++ ++ if (ispprev_obj.prev_outfmt == PREVIEW_MEM) { ++ prevsdroff = ispprev_obj.prevout_w * 2; ++ if ((prevsdroff & ISP_32B_BOUNDARY_OFFSET) != prevsdroff) { ++ DPRINTK_ISPPREV("ISP_WARN: Preview output buffer line" ++ " size is truncated" ++ " to 32byte boundary\n"); ++ prevsdroff &= ISP_32B_BOUNDARY_BUF ; ++ } ++ isppreview_config_outlineoffset(prevsdroff); ++ } ++ return 0; ++} ++EXPORT_SYMBOL_GPL(isppreview_config_size); ++ ++/** ++ * isppreview_config_inlineoffset - Configures the Read address line offset. ++ * @offset: Line Offset for the input image. ++ **/ ++int isppreview_config_inlineoffset(u32 offset) ++{ ++ if ((offset & ISP_32B_BOUNDARY_OFFSET) == offset) { ++ isp_reg_writel(offset & 0xffff, ++ OMAP3_ISP_IOMEM_PREV, ISPPRV_RADR_OFFSET); ++ } else { ++ printk(KERN_ERR "ISP_ERR : Offset should be in 32 byte " ++ "boundary\n"); ++ return -EINVAL; ++ } ++ return 0; ++} ++EXPORT_SYMBOL_GPL(isppreview_config_inlineoffset); ++ ++/** ++ * isppreview_set_inaddr - Sets memory address of input frame. ++ * @addr: 32bit memory address aligned on 32byte boundary. ++ * ++ * Configures the memory address from which the input frame is to be read. ++ **/ ++int isppreview_set_inaddr(u32 addr) ++{ ++ if ((addr & ISP_32B_BOUNDARY_BUF) == addr) ++ isp_reg_writel(addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_RSDR_ADDR); ++ else { ++ printk(KERN_ERR "ISP_ERR: Address should be in 32 byte " ++ "boundary\n"); ++ return -EINVAL; ++ } ++ return 0; ++} ++EXPORT_SYMBOL_GPL(isppreview_set_inaddr); ++ ++/** ++ * isppreview_config_outlineoffset - Configures the Write address line offset. ++ * @offset: Line Offset for the preview output. ++ **/ ++int isppreview_config_outlineoffset(u32 offset) ++{ ++ if ((offset & ISP_32B_BOUNDARY_OFFSET) != offset) { ++ printk(KERN_ERR "ISP_ERR : Offset should be in 32 byte " ++ "boundary\n"); ++ return -EINVAL; ++ } ++ isp_reg_writel(offset & 0xffff, OMAP3_ISP_IOMEM_PREV, ++ ISPPRV_WADD_OFFSET); ++ return 0; ++} ++EXPORT_SYMBOL_GPL(isppreview_config_outlineoffset); ++ ++/** ++ * isppreview_set_outaddr - Sets the memory address to store output frame ++ * @addr: 32bit memory address aligned on 32byte boundary. ++ * ++ * Configures the memory address to which the output frame is written. ++ **/ ++int isppreview_set_outaddr(u32 addr) ++{ ++ if ((addr & ISP_32B_BOUNDARY_BUF) != addr) { ++ printk(KERN_ERR "ISP_ERR: Address should be in 32 byte " ++ "boundary\n"); ++ return -EINVAL; ++ } ++ isp_reg_writel(addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_WSDR_ADDR); ++ return 0; ++} ++EXPORT_SYMBOL_GPL(isppreview_set_outaddr); ++ ++/** ++ * isppreview_config_darklineoffset - Sets the Dark frame address line offset. ++ * @offset: Line Offset for the Darkframe. ++ **/ ++int isppreview_config_darklineoffset(u32 offset) ++{ ++ if ((offset & ISP_32B_BOUNDARY_OFFSET) != offset) { ++ printk(KERN_ERR "ISP_ERR : Offset should be in 32 byte " ++ "boundary\n"); ++ return -EINVAL; ++ } ++ isp_reg_writel(offset & 0xffff, OMAP3_ISP_IOMEM_PREV, ++ ISPPRV_DRKF_OFFSET); ++ return 0; ++} ++EXPORT_SYMBOL_GPL(isppreview_config_darklineoffset); ++ ++/** ++ * isppreview_set_darkaddr - Sets the memory address to store Dark frame. ++ * @addr: 32bit memory address aligned on 32 bit boundary. ++ **/ ++int isppreview_set_darkaddr(u32 addr) ++{ ++ if ((addr & ISP_32B_BOUNDARY_BUF) != addr) { ++ printk(KERN_ERR "ISP_ERR : Address should be in 32 byte " ++ "boundary\n"); ++ return -EINVAL; ++ } ++ isp_reg_writel(addr, OMAP3_ISP_IOMEM_PREV, ISPPRV_DSDR_ADDR); ++ return 0; ++} ++EXPORT_SYMBOL_GPL(isppreview_set_darkaddr); ++ ++void __isppreview_enable(int enable) ++{ ++ if (enable) ++ isp_reg_or(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ISPPRV_PCR_EN); ++ else ++ isp_reg_and(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ~ISPPRV_PCR_EN); ++} ++ ++/** ++ * isppreview_enable - Enables the Preview module. ++ * @enable: 1 - Enables the preview module. ++ * ++ * Client should configure all the sub modules in Preview before this. ++ **/ ++void isppreview_enable(int enable) ++{ ++ __isppreview_enable(enable); ++ ispprev_obj.pm_state = enable; ++} ++EXPORT_SYMBOL_GPL(isppreview_enable); ++ ++/** ++ * isppreview_suspend - Suspend Preview module. ++ **/ ++void isppreview_suspend(void) ++{ ++ if (ispprev_obj.pm_state) ++ __isppreview_enable(0); ++} ++EXPORT_SYMBOL_GPL(isppreview_suspend); ++ ++/** ++ * isppreview_resume - Resume Preview module. ++ **/ ++void isppreview_resume(void) ++{ ++ if (ispprev_obj.pm_state) ++ __isppreview_enable(1); ++} ++EXPORT_SYMBOL_GPL(isppreview_resume); ++ ++ ++/** ++ * isppreview_busy - Gets busy state of preview module. ++ **/ ++int isppreview_busy(void) ++{ ++ return isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR) & ++ ISPPRV_PCR_BUSY; ++} ++EXPORT_SYMBOL_GPL(isppreview_busy); ++ ++/** ++ * isppreview_get_config - Gets parameters of preview module. ++ **/ ++struct prev_params *isppreview_get_config(void) ++{ ++ return prev_config_params; ++} ++EXPORT_SYMBOL_GPL(isppreview_get_config); ++ ++/** ++ * isppreview_save_context - Saves the values of the preview module registers. ++ **/ ++void isppreview_save_context(void) ++{ ++ DPRINTK_ISPPREV("Saving context\n"); ++ isp_save_context(ispprev_reg_list); ++} ++EXPORT_SYMBOL_GPL(isppreview_save_context); ++ ++/** ++ * isppreview_restore_context - Restores the values of preview module registers ++ **/ ++void isppreview_restore_context(void) ++{ ++ DPRINTK_ISPPREV("Restoring context\n"); ++ isp_restore_context(ispprev_reg_list); ++} ++EXPORT_SYMBOL_GPL(isppreview_restore_context); ++ ++/** ++ * isppreview_print_status - Prints the values of the Preview Module registers. ++ * ++ * Also prints other debug information stored in the preview moduel. ++ **/ ++void isppreview_print_status(void) ++{ ++ DPRINTK_ISPPREV("Module in use =%d\n", ispprev_obj.prev_inuse); ++ DPRINTK_ISPPREV("Preview Input format =%d, Output Format =%d\n", ++ ispprev_obj.prev_inpfmt, ++ ispprev_obj.prev_outfmt); ++ DPRINTK_ISPPREV("Accepted Preview Input (width = %d,Height = %d)\n", ++ ispprev_obj.previn_w, ++ ispprev_obj.previn_h); ++ DPRINTK_ISPPREV("Accepted Preview Output (width = %d,Height = %d)\n", ++ ispprev_obj.prevout_w, ++ ispprev_obj.prevout_h); ++ DPRINTK_ISPPREV("###ISP_CTRL in preview =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_CTRL)); ++ DPRINTK_ISPPREV("###ISP_IRQ0ENABLE in preview =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE)); ++ DPRINTK_ISPPREV("###ISP_IRQ0STATUS in preview =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS)); ++ DPRINTK_ISPPREV("###PRV PCR =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR)); ++ DPRINTK_ISPPREV("###PRV HORZ_INFO =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_HORZ_INFO)); ++ DPRINTK_ISPPREV("###PRV VERT_INFO =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_VERT_INFO)); ++ DPRINTK_ISPPREV("###PRV WSDR_ADDR =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_WSDR_ADDR)); ++ DPRINTK_ISPPREV("###PRV WADD_OFFSET =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ++ ISPPRV_WADD_OFFSET)); ++ DPRINTK_ISPPREV("###PRV AVE =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE)); ++ DPRINTK_ISPPREV("###PRV HMED =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_HMED)); ++ DPRINTK_ISPPREV("###PRV NF =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_NF)); ++ DPRINTK_ISPPREV("###PRV WB_DGAIN =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_WB_DGAIN)); ++ DPRINTK_ISPPREV("###PRV WBGAIN =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_WBGAIN)); ++ DPRINTK_ISPPREV("###PRV WBSEL =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_WBSEL)); ++ DPRINTK_ISPPREV("###PRV CFA =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_CFA)); ++ DPRINTK_ISPPREV("###PRV BLKADJOFF =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_BLKADJOFF)); ++ DPRINTK_ISPPREV("###PRV RGB_MAT1 =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT1)); ++ DPRINTK_ISPPREV("###PRV RGB_MAT2 =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT2)); ++ DPRINTK_ISPPREV("###PRV RGB_MAT3 =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT3)); ++ DPRINTK_ISPPREV("###PRV RGB_MAT4 =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT4)); ++ DPRINTK_ISPPREV("###PRV RGB_MAT5 =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_MAT5)); ++ DPRINTK_ISPPREV("###PRV RGB_OFF1 =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF1)); ++ DPRINTK_ISPPREV("###PRV RGB_OFF2 =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_RGB_OFF2)); ++ DPRINTK_ISPPREV("###PRV CSC0 =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC0)); ++ DPRINTK_ISPPREV("###PRV CSC1 =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC1)); ++ DPRINTK_ISPPREV("###PRV CSC2 =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC2)); ++ DPRINTK_ISPPREV("###PRV CSC_OFFSET =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_CSC_OFFSET)); ++ DPRINTK_ISPPREV("###PRV CNT_BRT =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_CNT_BRT)); ++ DPRINTK_ISPPREV("###PRV CSUP =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_CSUP)); ++ DPRINTK_ISPPREV("###PRV SETUP_YC =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ISPPRV_SETUP_YC)); ++} ++EXPORT_SYMBOL_GPL(isppreview_print_status); ++ ++/** ++ * isp_preview_init - Module Initialization. ++ **/ ++int __init isp_preview_init(void) ++{ ++ int i = 0; ++ ++ prev_config_params = kmalloc(sizeof(*prev_config_params), GFP_KERNEL); ++ if (!prev_config_params) { ++ printk(KERN_ERR "Can't get memory for isp_preview params!\n"); ++ return -ENOMEM; ++ } ++ params = prev_config_params; ++ ++ ispprev_obj.prev_inuse = 0; ++ mutex_init(&ispprev_obj.ispprev_mutex); ++ ++ /* Init values */ ++ ispprev_obj.sph = 2; ++ ispprev_obj.slv = 0; ++ ispprev_obj.color = V4L2_COLORFX_NONE; ++ ispprev_obj.contrast = ISPPRV_CONTRAST_DEF; ++ params->contrast = ISPPRV_CONTRAST_DEF; ++ ispprev_obj.brightness = ISPPRV_BRIGHT_DEF; ++ params->brightness = ISPPRV_BRIGHT_DEF; ++ params->average = NO_AVE; ++ params->lens_shading_shift = 0; ++ params->pix_fmt = YCPOS_YCrYCb; ++ params->cfa.cfafmt = CFAFMT_BAYER; ++ params->cfa.cfa_table = cfa_coef_table; ++ params->cfa.cfa_gradthrs_horz = FLR_CFA_GRADTHRS_HORZ; ++ params->cfa.cfa_gradthrs_vert = FLR_CFA_GRADTHRS_VERT; ++ params->csup.gain = FLR_CSUP_GAIN; ++ params->csup.thres = FLR_CSUP_THRES; ++ params->csup.hypf_en = 0; ++ params->ytable = luma_enhance_table; ++ params->nf.spread = FLR_NF_STRGTH; ++ memcpy(params->nf.table, noise_filter_table, sizeof(params->nf.table)); ++ params->dcor.couplet_mode_en = 1; ++ for (i = 0; i < 4; i++) ++ params->dcor.detect_correct[i] = 0xE; ++ params->gtable.bluetable = bluegamma_table; ++ params->gtable.greentable = greengamma_table; ++ params->gtable.redtable = redgamma_table; ++ params->wbal.dgain = FLR_WBAL_DGAIN; ++ if (omap_rev() > OMAP3430_REV_ES1_0) { ++ params->wbal.coef0 = FLR_WBAL_COEF0_ES1; ++ params->wbal.coef1 = FLR_WBAL_COEF1_ES1; ++ params->wbal.coef2 = FLR_WBAL_COEF2_ES1; ++ params->wbal.coef3 = FLR_WBAL_COEF3_ES1; ++ } else { ++ params->wbal.coef0 = FLR_WBAL_COEF0; ++ params->wbal.coef1 = FLR_WBAL_COEF1; ++ params->wbal.coef2 = FLR_WBAL_COEF2; ++ params->wbal.coef3 = FLR_WBAL_COEF3; ++ } ++ params->blk_adj.red = FLR_BLKADJ_RED; ++ params->blk_adj.green = FLR_BLKADJ_GREEN; ++ params->blk_adj.blue = FLR_BLKADJ_BLUE; ++ params->rgb2rgb = flr_rgb2rgb; ++ params->rgb2ycbcr = flr_prev_csc[ispprev_obj.color]; ++ ++ params->features = PREV_CFA | PREV_DEFECT_COR | PREV_NOISE_FILTER; ++ params->features &= ~(PREV_AVERAGER | PREV_INVERSE_ALAW | ++ PREV_HORZ_MEDIAN_FILTER | ++ PREV_GAMMA_BYPASS | ++ PREV_DARK_FRAME_SUBTRACT | ++ PREV_LENS_SHADING | ++ PREV_DARK_FRAME_CAPTURE | ++ PREV_CHROMA_SUPPRESS | ++ PREV_LUMA_ENHANCE); ++ return 0; ++} ++ ++/** ++ * isp_preview_cleanup - Module Cleanup. ++ **/ ++void isp_preview_cleanup(void) ++{ ++ kfree(prev_config_params); ++} +diff --git a/drivers/media/video/isp/isppreview.h b/drivers/media/video/isp/isppreview.h +new file mode 100644 +index 0000000..e88c329 +--- /dev/null ++++ b/drivers/media/video/isp/isppreview.h +@@ -0,0 +1,354 @@ ++/* ++ * isppreview.h ++ * ++ * Driver header file for Preview module in TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * Contributors: ++ * Senthilvadivu Guruswamy ++ * Pallavi Kulkarni ++ * Sergio Aguirre ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#ifndef OMAP_ISP_PREVIEW_H ++#define OMAP_ISP_PREVIEW_H ++ ++#include ++/* Isp query control structure */ ++ ++#define ISPPRV_BRIGHT_STEP 0x1 ++#define ISPPRV_BRIGHT_DEF 0x0 ++#define ISPPRV_BRIGHT_LOW 0x0 ++#define ISPPRV_BRIGHT_HIGH 0xF ++#define ISPPRV_BRIGHT_UNITS 0x7 ++ ++#define ISPPRV_CONTRAST_STEP 0x1 ++#define ISPPRV_CONTRAST_DEF 0x4 ++#define ISPPRV_CONTRAST_LOW 0x0 ++#define ISPPRV_CONTRAST_HIGH 0xF ++#define ISPPRV_CONTRAST_UNITS 0x4 ++ ++#define NO_AVE 0x0 ++#define AVE_2_PIX 0x1 ++#define AVE_4_PIX 0x2 ++#define AVE_8_PIX 0x3 ++#define AVE_ODD_PIXEL_DIST (1 << 4) /* For Bayer Sensors */ ++#define AVE_EVEN_PIXEL_DIST (1 << 2) ++ ++#define WB_GAIN_MAX 4 ++ ++/* Features list */ ++#define PREV_AVERAGER (1 << 0) ++#define PREV_INVERSE_ALAW (1 << 1) ++#define PREV_HORZ_MEDIAN_FILTER (1 << 2) ++#define PREV_NOISE_FILTER (1 << 3) ++#define PREV_CFA (1 << 4) ++#define PREV_GAMMA_BYPASS (1 << 5) ++#define PREV_LUMA_ENHANCE (1 << 6) ++#define PREV_CHROMA_SUPPRESS (1 << 7) ++#define PREV_DARK_FRAME_SUBTRACT (1 << 8) ++#define PREV_LENS_SHADING (1 << 9) ++#define PREV_DARK_FRAME_CAPTURE (1 << 10) ++#define PREV_DEFECT_COR (1 << 11) ++ ++ ++#define ISP_NF_TABLE_SIZE (1 << 10) ++ ++#define ISP_GAMMA_TABLE_SIZE (1 << 10) ++ ++/* Table addresses */ ++#define ISPPRV_TBL_ADDR_RED_G_START 0x00 ++#define ISPPRV_TBL_ADDR_BLUE_G_START 0x800 ++#define ISPPRV_TBL_ADDR_GREEN_G_START 0x400 ++ ++/* ++ *Enumeration Constants for input and output format ++ */ ++enum preview_input { ++ PRV_RAW_CCDC, ++ PRV_RAW_MEM, ++ PRV_RGBBAYERCFA, ++ PRV_COMPCFA, ++ PRV_CCDC_DRKF, ++ PRV_OTHERS ++}; ++enum preview_output { ++ PREVIEW_RSZ, ++ PREVIEW_MEM ++}; ++/* ++ * Configure byte layout of YUV image ++ */ ++enum preview_ycpos_mode { ++ YCPOS_YCrYCb = 0, ++ YCPOS_YCbYCr = 1, ++ YCPOS_CbYCrY = 2, ++ YCPOS_CrYCbY = 3 ++}; ++ ++/** ++ * struct ispprev_gtable - Structure for Gamma Correction. ++ * @redtable: Pointer to the red gamma table. ++ * @greentable: Pointer to the green gamma table. ++ * @bluetable: Pointer to the blue gamma table. ++ */ ++struct ispprev_gtable { ++ u32 *redtable; ++ u32 *greentable; ++ u32 *bluetable; ++}; ++ ++/** ++ * struct prev_white_balance - Structure for White Balance 2. ++ * @wb_dgain: White balance common gain. ++ * @wb_gain: Individual color gains. ++ * @wb_coefmatrix: Coefficient matrix ++ */ ++struct prev_white_balance { ++ u16 wb_dgain; /* white balance common gain */ ++ u8 wb_gain[WB_GAIN_MAX]; /* individual color gains */ ++ u8 wb_coefmatrix[WB_GAIN_MAX][WB_GAIN_MAX]; ++}; ++ ++/** ++ * struct prev_size_params - Structure for size parameters. ++ * @hstart: Starting pixel. ++ * @vstart: Starting line. ++ * @hsize: Width of input image. ++ * @vsize: Height of input image. ++ * @pixsize: Pixel size of the image in terms of bits. ++ * @in_pitch: Line offset of input image. ++ * @out_pitch: Line offset of output image. ++ */ ++struct prev_size_params { ++ unsigned int hstart; ++ unsigned int vstart; ++ unsigned int hsize; ++ unsigned int vsize; ++ unsigned char pixsize; ++ unsigned short in_pitch; ++ unsigned short out_pitch; ++}; ++ ++/** ++ * struct prev_rgb2ycbcr_coeffs - Structure RGB2YCbCr parameters. ++ * @coeff: Color conversion gains in 3x3 matrix. ++ * @offset: Color conversion offsets. ++ */ ++struct prev_rgb2ycbcr_coeffs { ++ short coeff[RGB_MAX][RGB_MAX]; ++ short offset[RGB_MAX]; ++}; ++ ++/** ++ * struct prev_darkfrm_params - Structure for Dark frame suppression. ++ * @addr: Memory start address. ++ * @offset: Line offset. ++ */ ++struct prev_darkfrm_params { ++ u32 addr; ++ u32 offset; ++ }; ++ ++/** ++ * struct prev_params - Structure for all configuration ++ * @features: Set of features enabled. ++ * @pix_fmt: Output pixel format. ++ * @cfa: CFA coefficients. ++ * @csup: Chroma suppression coefficients. ++ * @ytable: Pointer to Luma enhancement coefficients. ++ * @nf: Noise filter coefficients. ++ * @dcor: Noise filter coefficients. ++ * @gtable: Gamma coefficients. ++ * @wbal: White Balance parameters. ++ * @blk_adj: Black adjustment parameters. ++ * @rgb2rgb: RGB blending parameters. ++ * @rgb2ycbcr: RGB to ycbcr parameters. ++ * @hmf_params: Horizontal median filter. ++ * @size_params: Size parameters. ++ * @drkf_params: Darkframe parameters. ++ * @lens_shading_shift: ++ * @average: Downsampling rate for averager. ++ * @contrast: Contrast. ++ * @brightness: Brightness. ++ */ ++struct prev_params { ++ u16 features; ++ enum preview_ycpos_mode pix_fmt; ++ struct ispprev_cfa cfa; ++ struct ispprev_csup csup; ++ u32 *ytable; ++ struct ispprev_nf nf; ++ struct ispprev_dcor dcor; ++ struct ispprev_gtable gtable; ++ struct ispprev_wbal wbal; ++ struct ispprev_blkadj blk_adj; ++ struct ispprev_rgbtorgb rgb2rgb; ++ struct ispprev_csc rgb2ycbcr; ++ struct ispprev_hmed hmf_params; ++ struct prev_size_params size_params; ++ struct prev_darkfrm_params drkf_params; ++ u8 lens_shading_shift; ++ u8 average; ++ u8 contrast; ++ u8 brightness; ++}; ++ ++/** ++ * struct isptables_update - Structure for Table Configuration. ++ * @update: Specifies which tables should be updated. ++ * @flag: Specifies which tables should be enabled. ++ * @prev_nf: Pointer to structure for Noise Filter ++ * @lsc: Pointer to LSC gain table. (currently not used) ++ * @red_gamma: Pointer to red gamma correction table. ++ * @green_gamma: Pointer to green gamma correction table. ++ * @blue_gamma: Pointer to blue gamma correction table. ++ */ ++struct isptables_update { ++ u16 update; ++ u16 flag; ++ struct ispprev_nf *prev_nf; ++ u32 *lsc; ++ u32 *red_gamma; ++ u32 *green_gamma; ++ u32 *blue_gamma; ++}; ++ ++void isppreview_config_shadow_registers(void); ++ ++int isppreview_request(void); ++ ++int isppreview_free(void); ++ ++int isppreview_config_datapath(enum preview_input input, ++ enum preview_output output); ++ ++void isppreview_config_ycpos(enum preview_ycpos_mode mode); ++ ++void isppreview_config_averager(u8 average); ++ ++void isppreview_enable_invalaw(u8 enable); ++ ++void isppreview_enable_drkframe(u8 enable); ++ ++void isppreview_enable_shadcomp(u8 enable); ++ ++void isppreview_config_drkf_shadcomp(u8 scomp_shtval); ++ ++void isppreview_enable_gammabypass(u8 enable); ++ ++void isppreview_enable_hmed(u8 enable); ++ ++void isppreview_config_hmed(struct ispprev_hmed); ++ ++void isppreview_enable_noisefilter(u8 enable); ++ ++void isppreview_config_noisefilter(struct ispprev_nf prev_nf); ++ ++void isppreview_enable_dcor(u8 enable); ++ ++void isppreview_config_dcor(struct ispprev_dcor prev_dcor); ++ ++ ++void isppreview_config_cfa(struct ispprev_cfa); ++ ++void isppreview_config_gammacorrn(struct ispprev_gtable); ++ ++void isppreview_config_chroma_suppression(struct ispprev_csup csup); ++ ++void isppreview_enable_cfa(u8 enable); ++ ++void isppreview_config_luma_enhancement(u32 *ytable); ++ ++void isppreview_enable_luma_enhancement(u8 enable); ++ ++void isppreview_enable_chroma_suppression(u8 enable); ++ ++void isppreview_config_whitebalance(struct ispprev_wbal); ++ ++void isppreview_config_blkadj(struct ispprev_blkadj); ++ ++void isppreview_config_rgb_blending(struct ispprev_rgbtorgb); ++ ++void isppreview_config_rgb_to_ycbcr(struct ispprev_csc); ++ ++void isppreview_update_contrast(u8 *contrast); ++ ++void isppreview_query_contrast(u8 *contrast); ++ ++void isppreview_config_contrast(u8 contrast); ++ ++void isppreview_get_contrast_range(u8 *min_contrast, u8 *max_contrast); ++ ++void isppreview_update_brightness(u8 *brightness); ++ ++void isppreview_config_brightness(u8 brightness); ++ ++void isppreview_get_brightness_range(u8 *min_brightness, u8 *max_brightness); ++ ++void isppreview_set_color(u8 *mode); ++ ++void isppreview_get_color(u8 *mode); ++ ++void isppreview_query_brightness(u8 *brightness); ++ ++void isppreview_config_yc_range(struct ispprev_yclimit yclimit); ++ ++int isppreview_try_size(u32 input_w, u32 input_h, u32 *output_w, ++ u32 *output_h); ++ ++int isppreview_config_size(u32 input_w, u32 input_h, u32 output_w, ++ u32 output_h); ++ ++int isppreview_config_inlineoffset(u32 offset); ++ ++int isppreview_set_inaddr(u32 addr); ++ ++int isppreview_config_outlineoffset(u32 offset); ++ ++int isppreview_set_outaddr(u32 addr); ++ ++int isppreview_config_darklineoffset(u32 offset); ++ ++int isppreview_set_darkaddr(u32 addr); ++ ++void isppreview_enable(int enable); ++ ++void isppreview_suspend(void); ++ ++void isppreview_resume(void); ++ ++int isppreview_busy(void); ++ ++struct prev_params *isppreview_get_config(void); ++ ++void isppreview_print_status(void); ++ ++#ifndef CONFIG_ARCH_OMAP3410 ++void isppreview_save_context(void); ++#else ++static inline void isppreview_save_context(void) {} ++#endif ++ ++#ifndef CONFIG_ARCH_OMAP3410 ++void isppreview_restore_context(void); ++#else ++static inline void isppreview_restore_context(void) {} ++#endif ++ ++int omap34xx_isp_preview_config(void *userspace_add); ++ ++int omap34xx_isp_tables_update(struct isptables_update *isptables_struct); ++ ++void isppreview_set_skip(u32 h, u32 v); ++ ++#endif/* OMAP_ISP_PREVIEW_H */ +diff --git a/drivers/media/video/isp/ispresizer.c b/drivers/media/video/isp/ispresizer.c +new file mode 100644 +index 0000000..f78ddb3 +--- /dev/null ++++ b/drivers/media/video/isp/ispresizer.c +@@ -0,0 +1,928 @@ ++/* ++ * ispresizer.c ++ * ++ * Driver Library for Resizer module in TI's OMAP3 Camera ISP ++ * ++ * Copyright (C)2009 Texas Instruments, Inc. ++ * ++ * Contributors: ++ * Sameer Venkatraman ++ * Mohit Jalori ++ * Sergio Aguirre ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#include ++ ++#include "isp.h" ++#include "ispreg.h" ++#include "ispresizer.h" ++ ++/* Default configuration of resizer,filter coefficients,yenh for camera isp */ ++static struct isprsz_yenh ispreszdefaultyenh = {0, 0, 0, 0}; ++static struct isprsz_coef ispreszdefcoef = { ++ { ++ 0x0027, 0x00B2, 0x00B2, 0x0027, ++ 0x0027, 0x00B2, 0x0027, 0x00B2, ++ 0x0027, 0x00B2, 0x0027, 0x00B2, ++ 0x0027, 0x00B2, 0x0027, 0x00B2, ++ 0x0027, 0x00B2, 0x0027, 0x00B2, ++ 0x0027, 0x00B2, 0x0027, 0x00B2, ++ 0x0027, 0x00B2, 0x0027, 0x00B2, ++ 0x0027, 0x00B2, 0x0027, 0x00B2, ++ }, ++ { ++ 0x0000, 0x0100, 0x0000, 0x0000, ++ 0x03FA, 0x00F6, 0x0010, 0x0000, ++ 0x03F9, 0x00DB, 0x002C, 0x0000, ++ 0x03FB, 0x00B3, 0x0053, 0x03FF, ++ 0x03FD, 0x0082, 0x0084, 0x03FD, ++ 0x03FF, 0x0053, 0x00B3, 0x03FB, ++ 0x0000, 0x002C, 0x00DB, 0x03F9, ++ 0x0000, 0x0010, 0x00F6, 0x03FA ++ }, ++ { ++ 0x0004, 0x0023, 0x0023, 0x005A, ++ 0x005A, 0x0058, 0x0058, 0x0004, ++ 0x0023, 0x0023, 0x005A, 0x005A, ++ 0x0058, 0x0058, 0x0004, 0x0023, ++ 0x0023, 0x005A, 0x005A, 0x0058, ++ 0x0058, 0x0004, 0x0023, 0x0023, ++ 0x005A, 0x005A, 0x0058, 0x0058 ++ }, ++ { ++ 0x0004, 0x0023, 0x005A, 0x0058, ++ 0x0023, 0x0004, 0x0000, 0x0002, ++ 0x0018, 0x004d, 0x0060, 0x0031, ++ 0x0008, 0x0000, 0x0001, 0x000f, ++ 0x003f, 0x0062, 0x003f, 0x000f, ++ 0x0001, 0x0000, 0x0008, 0x0031, ++ 0x0060, 0x004d, 0x0018, 0x0002 ++ } ++}; ++ ++/** ++ * struct isp_res - Structure for the resizer module to store its information. ++ * @res_inuse: Indicates if resizer module has been reserved. 1 - Reserved, ++ * 0 - Freed. ++ * @h_startphase: Horizontal starting phase. ++ * @v_startphase: Vertical starting phase. ++ * @h_resz: Horizontal resizing value. ++ * @v_resz: Vertical resizing value. ++ * @outputwidth: Output Image Width in pixels. ++ * @outputheight: Output Image Height in pixels. ++ * @inputwidth: Input Image Width in pixels. ++ * @inputheight: Input Image Height in pixels. ++ * @algo: Algorithm select. 0 - Disable, 1 - [-1 2 -1]/2 high-pass filter, ++ * 2 - [-1 -2 6 -2 -1]/4 high-pass filter. ++ * @ipht_crop: Vertical start line for cropping. ++ * @ipwd_crop: Horizontal start pixel for cropping. ++ * @cropwidth: Crop Width. ++ * @cropheight: Crop Height. ++ * @resinput: Resizer input. ++ * @coeflist: Register configuration for Resizer. ++ * @ispres_mutex: Mutex for isp resizer. ++ */ ++static struct isp_res { ++ int pm_state; ++ u8 res_inuse; ++ u8 h_startphase; ++ u8 v_startphase; ++ u16 h_resz; ++ u16 v_resz; ++ u32 outputwidth; ++ u32 outputheight; ++ u32 inputwidth; ++ u32 inputheight; ++ u8 algo; ++ u32 ipht_crop; ++ u32 ipwd_crop; ++ u32 cropwidth; ++ u32 cropheight; ++ dma_addr_t tmp_buf; ++ enum ispresizer_input resinput; ++ struct isprsz_coef coeflist; ++ struct mutex ispres_mutex; /* For checking/modifying res_inuse */ ++} ispres_obj; ++ ++/* Structure for saving/restoring resizer module registers */ ++static struct isp_reg isprsz_reg_list[] = { ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_OUT_SIZE, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_IN_START, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_IN_SIZE, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_INADD, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_INOFF, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_OUTADD, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_OUTOFF, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_HFILT10, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_HFILT32, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_HFILT54, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_HFILT76, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_HFILT98, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_HFILT1110, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_HFILT1312, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_HFILT1514, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_HFILT1716, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_HFILT1918, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_HFILT2120, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_HFILT2322, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_HFILT2524, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_HFILT2726, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_HFILT2928, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_HFILT3130, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_VFILT10, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_VFILT32, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_VFILT54, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_VFILT76, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_VFILT98, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_VFILT1110, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_VFILT1312, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_VFILT1514, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_VFILT1716, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_VFILT1918, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_VFILT2120, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_VFILT2322, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_VFILT2524, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_VFILT2726, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_VFILT2928, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_VFILT3130, 0x0000}, ++ {OMAP3_ISP_IOMEM_RESZ, ISPRSZ_YENH, 0x0000}, ++ {0, ISP_TOK_TERM, 0x0000} ++}; ++ ++/** ++ * ispresizer_config_shadow_registers - Configure shadow registers. ++ **/ ++void ispresizer_config_shadow_registers() ++{ ++ return; ++} ++EXPORT_SYMBOL(ispresizer_config_shadow_registers); ++ ++/** ++ * ispresizer_trycrop - Validate crop dimensions. ++ * @left: Left distance to start position of crop. ++ * @top: Top distance to start position of crop. ++ * @width: Width of input image. ++ * @height: Height of input image. ++ * @ow: Width of output image. ++ * @oh: Height of output image. ++ **/ ++void ispresizer_trycrop(u32 left, u32 top, u32 width, u32 height, u32 ow, ++ u32 oh) ++{ ++ ispres_obj.cropwidth = width + 6; ++ ispres_obj.cropheight = height + 6; ++ ispresizer_try_size(&ispres_obj.cropwidth, &ispres_obj.cropheight, &ow, ++ &oh); ++ ispres_obj.ipht_crop = top; ++ ispres_obj.ipwd_crop = left; ++} ++EXPORT_SYMBOL(ispresizer_trycrop); ++ ++/** ++ * ispresizer_applycrop - Apply crop to input image. ++ **/ ++void ispresizer_applycrop(void) ++{ ++ ispresizer_config_size(ispres_obj.cropwidth, ispres_obj.cropheight, ++ ispres_obj.outputwidth, ++ ispres_obj.outputheight); ++ return; ++} ++EXPORT_SYMBOL(ispresizer_applycrop); ++ ++/** ++ * ispresizer_request - Reserves the Resizer module. ++ * ++ * Allows only one user at a time. ++ * ++ * Returns 0 if successful, or -EBUSY if resizer module was already requested. ++ **/ ++int ispresizer_request() ++{ ++ mutex_lock(&ispres_obj.ispres_mutex); ++ if (!ispres_obj.res_inuse) { ++ ispres_obj.res_inuse = 1; ++ mutex_unlock(&ispres_obj.ispres_mutex); ++ isp_reg_writel(isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_CTRL) | ++ ISPCTRL_SBL_WR0_RAM_EN | ++ ISPCTRL_RSZ_CLK_EN, ++ OMAP3_ISP_IOMEM_MAIN, ISP_CTRL); ++ return 0; ++ } else { ++ mutex_unlock(&ispres_obj.ispres_mutex); ++ printk(KERN_ERR "ISP_ERR : Resizer Module Busy\n"); ++ return -EBUSY; ++ } ++} ++EXPORT_SYMBOL(ispresizer_request); ++ ++/** ++ * ispresizer_free - Makes Resizer module free. ++ * ++ * Returns 0 if successful, or -EINVAL if resizer module was already freed. ++ **/ ++int ispresizer_free() ++{ ++ mutex_lock(&ispres_obj.ispres_mutex); ++ if (ispres_obj.res_inuse) { ++ ispres_obj.res_inuse = 0; ++ mutex_unlock(&ispres_obj.ispres_mutex); ++ isp_reg_and(OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, ++ ~(ISPCTRL_RSZ_CLK_EN | ISPCTRL_SBL_WR0_RAM_EN)); ++ return 0; ++ } else { ++ mutex_unlock(&ispres_obj.ispres_mutex); ++ DPRINTK_ISPRESZ("ISP_ERR : Resizer Module already freed\n"); ++ return -EINVAL; ++ } ++} ++EXPORT_SYMBOL(ispresizer_free); ++ ++/** ++ * ispresizer_config_datapath - Specifies which input to use in resizer module ++ * @input: Indicates the module that gives the image to resizer. ++ * ++ * Sets up the default resizer configuration according to the arguments. ++ * ++ * Returns 0 if successful, or -EINVAL if an unsupported input was requested. ++ **/ ++int ispresizer_config_datapath(enum ispresizer_input input) ++{ ++ u32 cnt = 0; ++ DPRINTK_ISPRESZ("ispresizer_config_datapath()+\n"); ++ ispres_obj.resinput = input; ++ switch (input) { ++ case RSZ_OTFLY_YUV: ++ cnt &= ~ISPRSZ_CNT_INPTYP; ++ cnt &= ~ISPRSZ_CNT_INPSRC; ++ ispresizer_set_inaddr(0); ++ ispresizer_config_inlineoffset(0); ++ break; ++ case RSZ_MEM_YUV: ++ cnt |= ISPRSZ_CNT_INPSRC; ++ cnt &= ~ISPRSZ_CNT_INPTYP; ++ break; ++ case RSZ_MEM_COL8: ++ cnt |= ISPRSZ_CNT_INPSRC; ++ cnt |= ISPRSZ_CNT_INPTYP; ++ break; ++ default: ++ printk(KERN_ERR "ISP_ERR : Wrong Input\n"); ++ return -EINVAL; ++ } ++ isp_reg_or(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT, cnt); ++ ispresizer_config_ycpos(0); ++ ispresizer_config_filter_coef(&ispreszdefcoef); ++ ispresizer_enable_cbilin(0); ++ ispresizer_config_luma_enhance(&ispreszdefaultyenh); ++ DPRINTK_ISPRESZ("ispresizer_config_datapath()-\n"); ++ return 0; ++} ++EXPORT_SYMBOL(ispresizer_config_datapath); ++ ++/** ++ * ispresizer_try_size - Validates input and output images size. ++ * @input_w: input width for the resizer in number of pixels per line ++ * @input_h: input height for the resizer in number of lines ++ * @output_w: output width from the resizer in number of pixels per line ++ * resizer when writing to memory needs this to be multiple of 16. ++ * @output_h: output height for the resizer in number of lines, must be even. ++ * ++ * Calculates the horizontal and vertical resize ratio, number of pixels to ++ * be cropped in the resizer module and checks the validity of various ++ * parameters. Formula used for calculation is:- ++ * ++ * 8-phase 4-tap mode :- ++ * inputwidth = (32 * sph + (ow - 1) * hrsz + 16) >> 8 + 7 ++ * inputheight = (32 * spv + (oh - 1) * vrsz + 16) >> 8 + 4 ++ * endpahse for width = ((32 * sph + (ow - 1) * hrsz + 16) >> 5) % 8 ++ * endphase for height = ((32 * sph + (oh - 1) * hrsz + 16) >> 5) % 8 ++ * ++ * 4-phase 7-tap mode :- ++ * inputwidth = (64 * sph + (ow - 1) * hrsz + 32) >> 8 + 7 ++ * inputheight = (64 * spv + (oh - 1) * vrsz + 32) >> 8 + 7 ++ * endpahse for width = ((64 * sph + (ow - 1) * hrsz + 32) >> 6) % 4 ++ * endphase for height = ((64 * sph + (oh - 1) * hrsz + 32) >> 6) % 4 ++ * ++ * Where: ++ * sph = Start phase horizontal ++ * spv = Start phase vertical ++ * ow = Output width ++ * oh = Output height ++ * hrsz = Horizontal resize value ++ * vrsz = Vertical resize value ++ * ++ * Fills up the output/input widht/height, horizontal/vertical resize ratio, ++ * horizontal/vertical crop variables in the isp_res structure. ++ **/ ++int ispresizer_try_size(u32 *input_width, u32 *input_height, u32 *output_w, ++ u32 *output_h) ++{ ++ u32 rsz, rsz_7, rsz_4; ++ u32 sph; ++ u32 input_w, input_h; ++ int max_in_otf, max_out_7tap; ++ ++ input_w = *input_width; ++ input_h = *input_height; ++ ++ if (input_w < 32 || input_h < 32) { ++ DPRINTK_ISPCCDC("ISP_ERR: RESIZER cannot handle input width" ++ " less than 32 pixels or height less than" ++ " 32\n"); ++ return -EINVAL; ++ } ++ input_w -= 6; ++ input_h -= 6; ++ ++ if (input_h > MAX_IN_HEIGHT) ++ return -EINVAL; ++ ++ if (*output_w < 16) ++ *output_w = 16; ++ ++ if (*output_h < 2) ++ *output_h = 2; ++ ++ if (omap_rev() == OMAP3430_REV_ES1_0) { ++ max_in_otf = MAX_IN_WIDTH_ONTHEFLY_MODE; ++ max_out_7tap = MAX_7TAP_VRSZ_OUTWIDTH; ++ } else { ++ max_in_otf = MAX_IN_WIDTH_ONTHEFLY_MODE_ES2; ++ max_out_7tap = MAX_7TAP_VRSZ_OUTWIDTH_ES2; ++ } ++ ++ if (ispres_obj.resinput == RSZ_OTFLY_YUV) { ++ if (input_w > max_in_otf) ++ return -EINVAL; ++ } else { ++ if (input_w > MAX_IN_WIDTH_MEMORY_MODE) ++ return -EINVAL; ++ } ++ ++ *output_h &= 0xfffffffe; ++ sph = DEFAULTSTPHASE; ++ ++ rsz_7 = ((input_h - 7) * 256) / (*output_h - 1); ++ rsz_4 = ((input_h - 4) * 256) / (*output_h - 1); ++ ++ rsz = (input_h * 256) / *output_h; ++ ++ if (rsz <= MID_RESIZE_VALUE) { ++ rsz = rsz_4; ++ if (rsz < MINIMUM_RESIZE_VALUE) { ++ rsz = MINIMUM_RESIZE_VALUE; ++ *output_h = (((input_h - 4) * 256) / rsz) + 1; ++ printk(KERN_INFO "%s: using output_h %d instead\n", ++ __func__, *output_h); ++ } ++ } else { ++ rsz = rsz_7; ++ if (*output_w > max_out_7tap) ++ *output_w = max_out_7tap; ++ if (rsz > MAXIMUM_RESIZE_VALUE) { ++ rsz = MAXIMUM_RESIZE_VALUE; ++ *output_h = (((input_h - 7) * 256) / rsz) + 1; ++ printk(KERN_INFO "%s: using output_h %d instead\n", ++ __func__, *output_h); ++ } ++ } ++ ++ if (rsz > MID_RESIZE_VALUE) { ++ input_h = ++ (((64 * sph) + ((*output_h - 1) * rsz) + 32) / 256) + 7; ++ } else { ++ input_h = ++ (((32 * sph) + ((*output_h - 1) * rsz) + 16) / 256) + 4; ++ } ++ ++ ispres_obj.outputheight = *output_h; ++ ispres_obj.v_resz = rsz; ++ ispres_obj.inputheight = input_h; ++ ispres_obj.ipht_crop = DEFAULTSTPIXEL; ++ ispres_obj.v_startphase = sph; ++ ++ *output_w &= 0xfffffff0; ++ sph = DEFAULTSTPHASE; ++ ++ rsz_7 = ((input_w - 7) * 256) / (*output_w - 1); ++ rsz_4 = ((input_w - 4) * 256) / (*output_w - 1); ++ ++ rsz = (input_w * 256) / *output_w; ++ if (rsz > MID_RESIZE_VALUE) { ++ rsz = rsz_7; ++ if (rsz > MAXIMUM_RESIZE_VALUE) { ++ rsz = MAXIMUM_RESIZE_VALUE; ++ *output_w = (((input_w - 7) * 256) / rsz) + 1; ++ *output_w = (*output_w + 0xf) & 0xfffffff0; ++ printk(KERN_INFO "%s: using output_w %d instead\n", ++ __func__, *output_w); ++ } ++ } else { ++ rsz = rsz_4; ++ if (rsz < MINIMUM_RESIZE_VALUE) { ++ rsz = MINIMUM_RESIZE_VALUE; ++ *output_w = (((input_w - 4) * 256) / rsz) + 1; ++ *output_w = (*output_w + 0xf) & 0xfffffff0; ++ printk(KERN_INFO "%s: using output_w %d instead\n", ++ __func__, *output_w); ++ } ++ } ++ ++ /* Recalculate input based on TRM equations */ ++ if (rsz > MID_RESIZE_VALUE) { ++ input_w = ++ (((64 * sph) + ((*output_w - 1) * rsz) + 32) / 256) + 7; ++ } else { ++ input_w = ++ (((32 * sph) + ((*output_w - 1) * rsz) + 16) / 256) + 7; ++ } ++ ++ ispres_obj.outputwidth = *output_w; ++ ispres_obj.h_resz = rsz; ++ ispres_obj.inputwidth = input_w; ++ ispres_obj.ipwd_crop = DEFAULTSTPIXEL; ++ ispres_obj.h_startphase = sph; ++ ++ *input_height = input_h; ++ *input_width = input_w; ++ return 0; ++} ++EXPORT_SYMBOL(ispresizer_try_size); ++ ++/** ++ * ispresizer_config_size - Configures input and output image size. ++ * @input_w: input width for the resizer in number of pixels per line. ++ * @input_h: input height for the resizer in number of lines. ++ * @output_w: output width from the resizer in number of pixels per line. ++ * @output_h: output height for the resizer in number of lines. ++ * ++ * Configures the appropriate values stored in the isp_res structure in the ++ * resizer registers. ++ * ++ * Returns 0 if successful, or -EINVAL if passed values haven't been verified ++ * with ispresizer_try_size() previously. ++ **/ ++int ispresizer_config_size(u32 input_w, u32 input_h, u32 output_w, ++ u32 output_h) ++{ ++ int i, j; ++ u32 res; ++ DPRINTK_ISPRESZ("ispresizer_config_size()+, input_w = %d,input_h =" ++ " %d, output_w = %d, output_h" ++ " = %d,hresz = %d,vresz = %d," ++ " hcrop = %d, vcrop = %d," ++ " hstph = %d, vstph = %d\n", ++ ispres_obj.inputwidth, ++ ispres_obj.inputheight, ++ ispres_obj.outputwidth, ++ ispres_obj.outputheight, ++ ispres_obj.h_resz, ++ ispres_obj.v_resz, ++ ispres_obj.ipwd_crop, ++ ispres_obj.ipht_crop, ++ ispres_obj.h_startphase, ++ ispres_obj.v_startphase); ++ if ((output_w != ispres_obj.outputwidth) ++ || (output_h != ispres_obj.outputheight)) { ++ printk(KERN_ERR "Output parameters passed do not match the" ++ " values calculated by the" ++ " trysize passed w %d, h %d" ++ " \n", output_w , output_h); ++ return -EINVAL; ++ } ++ ++ /* Set Resizer input address and offset adderss */ ++ ispresizer_config_inlineoffset(isp_reg_readl(OMAP3_ISP_IOMEM_PREV, ++ ISPPRV_WADD_OFFSET)); ++ ++ res = isp_reg_readl(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT) & ++ ~(ISPRSZ_CNT_HSTPH_MASK | ISPRSZ_CNT_VSTPH_MASK); ++ isp_reg_writel(res | ++ (ispres_obj.h_startphase << ISPRSZ_CNT_HSTPH_SHIFT) | ++ (ispres_obj.v_startphase << ISPRSZ_CNT_VSTPH_SHIFT), ++ OMAP3_ISP_IOMEM_RESZ, ++ ISPRSZ_CNT); ++ /* Set start address for cropping */ ++ isp_reg_writel(ispres_obj.tmp_buf + 2 * ++ (ispres_obj.ipht_crop * ispres_obj.inputwidth + ++ (ispres_obj.ipwd_crop & ~15)), ++ OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_INADD); ++ ++ isp_reg_writel( ++ ((ispres_obj.ipwd_crop & 15) << ISPRSZ_IN_START_HORZ_ST_SHIFT) | ++ (0x00 << ISPRSZ_IN_START_VERT_ST_SHIFT), ++ OMAP3_ISP_IOMEM_RESZ, ISPRSZ_IN_START); ++ ++ isp_reg_writel((0x00 << ISPRSZ_IN_START_HORZ_ST_SHIFT) | ++ (0x00 << ISPRSZ_IN_START_VERT_ST_SHIFT), ++ OMAP3_ISP_IOMEM_RESZ, ++ ISPRSZ_IN_START); ++ ++ isp_reg_writel((ispres_obj.inputwidth << ISPRSZ_IN_SIZE_HORZ_SHIFT) | ++ (ispres_obj.inputheight << ++ ISPRSZ_IN_SIZE_VERT_SHIFT), ++ OMAP3_ISP_IOMEM_RESZ, ++ ISPRSZ_IN_SIZE); ++ if (!ispres_obj.algo) { ++ isp_reg_writel((output_w << ISPRSZ_OUT_SIZE_HORZ_SHIFT) | ++ (output_h << ISPRSZ_OUT_SIZE_VERT_SHIFT), ++ OMAP3_ISP_IOMEM_RESZ, ++ ISPRSZ_OUT_SIZE); ++ } else { ++ isp_reg_writel(((output_w - 4) << ISPRSZ_OUT_SIZE_HORZ_SHIFT) | ++ (output_h << ISPRSZ_OUT_SIZE_VERT_SHIFT), ++ OMAP3_ISP_IOMEM_RESZ, ++ ISPRSZ_OUT_SIZE); ++ } ++ ++ res = isp_reg_readl(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT) & ++ ~(ISPRSZ_CNT_HRSZ_MASK | ISPRSZ_CNT_VRSZ_MASK); ++ isp_reg_writel(res | ++ ((ispres_obj.h_resz - 1) << ISPRSZ_CNT_HRSZ_SHIFT) | ++ ((ispres_obj.v_resz - 1) << ISPRSZ_CNT_VRSZ_SHIFT), ++ OMAP3_ISP_IOMEM_RESZ, ++ ISPRSZ_CNT); ++ if (ispres_obj.h_resz <= MID_RESIZE_VALUE) { ++ j = 0; ++ for (i = 0; i < 16; i++) { ++ isp_reg_writel( ++ (ispres_obj.coeflist.h_filter_coef_4tap[j] ++ << ISPRSZ_HFILT10_COEF0_SHIFT) | ++ (ispres_obj.coeflist.h_filter_coef_4tap[j + 1] ++ << ISPRSZ_HFILT10_COEF1_SHIFT), ++ OMAP3_ISP_IOMEM_RESZ, ++ ISPRSZ_HFILT10 + (i * 0x04)); ++ j += 2; ++ } ++ } else { ++ j = 0; ++ for (i = 0; i < 16; i++) { ++ if ((i + 1) % 4 == 0) { ++ isp_reg_writel((ispres_obj.coeflist. ++ h_filter_coef_7tap[j] << ++ ISPRSZ_HFILT10_COEF0_SHIFT), ++ OMAP3_ISP_IOMEM_RESZ, ++ ISPRSZ_HFILT10 + (i * 0x04)); ++ j += 1; ++ } else { ++ isp_reg_writel((ispres_obj.coeflist. ++ h_filter_coef_7tap[j] << ++ ISPRSZ_HFILT10_COEF0_SHIFT) | ++ (ispres_obj.coeflist. ++ h_filter_coef_7tap[j+1] << ++ ISPRSZ_HFILT10_COEF1_SHIFT), ++ OMAP3_ISP_IOMEM_RESZ, ++ ISPRSZ_HFILT10 + (i * 0x04)); ++ j += 2; ++ } ++ } ++ } ++ if (ispres_obj.v_resz <= MID_RESIZE_VALUE) { ++ j = 0; ++ for (i = 0; i < 16; i++) { ++ isp_reg_writel((ispres_obj.coeflist. ++ v_filter_coef_4tap[j] << ++ ISPRSZ_VFILT10_COEF0_SHIFT) | ++ (ispres_obj.coeflist. ++ v_filter_coef_4tap[j + 1] << ++ ISPRSZ_VFILT10_COEF1_SHIFT), ++ OMAP3_ISP_IOMEM_RESZ, ++ ISPRSZ_VFILT10 + (i * 0x04)); ++ j += 2; ++ } ++ } else { ++ j = 0; ++ for (i = 0; i < 16; i++) { ++ if ((i + 1) % 4 == 0) { ++ isp_reg_writel((ispres_obj.coeflist. ++ v_filter_coef_7tap[j] << ++ ISPRSZ_VFILT10_COEF0_SHIFT), ++ OMAP3_ISP_IOMEM_RESZ, ++ ISPRSZ_VFILT10 + (i * 0x04)); ++ j += 1; ++ } else { ++ isp_reg_writel((ispres_obj.coeflist. ++ v_filter_coef_7tap[j] << ++ ISPRSZ_VFILT10_COEF0_SHIFT) | ++ (ispres_obj.coeflist. ++ v_filter_coef_7tap[j+1] << ++ ISPRSZ_VFILT10_COEF1_SHIFT), ++ OMAP3_ISP_IOMEM_RESZ, ++ ISPRSZ_VFILT10 + (i * 0x04)); ++ j += 2; ++ } ++ } ++ } ++ ++ ispresizer_config_outlineoffset(output_w*2); ++ DPRINTK_ISPRESZ("ispresizer_config_size()-\n"); ++ return 0; ++} ++EXPORT_SYMBOL(ispresizer_config_size); ++ ++void __ispresizer_enable(int enable) ++{ ++ int val; ++ DPRINTK_ISPRESZ("+ispresizer_enable()+\n"); ++ if (enable) { ++ val = (isp_reg_readl(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_PCR) & 0x2) | ++ ISPRSZ_PCR_ENABLE; ++ } else { ++ val = isp_reg_readl(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_PCR) & ++ ~ISPRSZ_PCR_ENABLE; ++ } ++ isp_reg_writel(val, OMAP3_ISP_IOMEM_RESZ, ISPRSZ_PCR); ++ DPRINTK_ISPRESZ("+ispresizer_enable()-\n"); ++} ++ ++/** ++ * ispresizer_enable - Enables the resizer module. ++ * @enable: 1 - Enable, 0 - Disable ++ * ++ * Client should configure all the sub modules in resizer before this. ++ **/ ++void ispresizer_enable(int enable) ++{ ++ __ispresizer_enable(enable); ++ ispres_obj.pm_state = enable; ++} ++EXPORT_SYMBOL(ispresizer_enable); ++ ++/** ++ * ispresizer_suspend - Suspend resizer module. ++ **/ ++void ispresizer_suspend(void) ++{ ++ if (ispres_obj.pm_state) ++ __ispresizer_enable(0); ++} ++EXPORT_SYMBOL(ispresizer_suspend); ++ ++/** ++ * ispresizer_resume - Resume resizer module. ++ **/ ++void ispresizer_resume(void) ++{ ++ if (ispres_obj.pm_state) ++ __ispresizer_enable(1); ++} ++EXPORT_SYMBOL(ispresizer_resume); ++ ++/** ++ * ispresizer_busy - Checks if ISP resizer is busy. ++ * ++ * Returns busy field from ISPRSZ_PCR register. ++ **/ ++int ispresizer_busy(void) ++{ ++ return isp_reg_readl(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_PCR) & ++ ISPPRV_PCR_BUSY; ++} ++EXPORT_SYMBOL(ispresizer_busy); ++ ++/** ++ * ispresizer_config_startphase - Sets the horizontal and vertical start phase. ++ * @hstartphase: horizontal start phase (0 - 7). ++ * @vstartphase: vertical startphase (0 - 7). ++ * ++ * This API just updates the isp_res struct. Actual register write happens in ++ * ispresizer_config_size. ++ **/ ++void ispresizer_config_startphase(u8 hstartphase, u8 vstartphase) ++{ ++ DPRINTK_ISPRESZ("ispresizer_config_startphase()+\n"); ++ ispres_obj.h_startphase = hstartphase; ++ ispres_obj.v_startphase = vstartphase; ++ DPRINTK_ISPRESZ("ispresizer_config_startphase()-\n"); ++} ++EXPORT_SYMBOL(ispresizer_config_startphase); ++ ++/** ++ * ispresizer_config_ycpos - Specifies if output should be in YC or CY format. ++ * @yc: 0 - YC format, 1 - CY format ++ **/ ++void ispresizer_config_ycpos(u8 yc) ++{ ++ DPRINTK_ISPRESZ("ispresizer_config_ycpos()+\n"); ++ isp_reg_and_or(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT, ~ISPRSZ_CNT_YCPOS, ++ (yc ? ISPRSZ_CNT_YCPOS : 0)); ++ DPRINTK_ISPRESZ("ispresizer_config_ycpos()-\n"); ++} ++EXPORT_SYMBOL(ispresizer_config_ycpos); ++ ++/** ++ * Sets the chrominance algorithm ++ * @cbilin: 0 - chrominance uses same processing as luminance, ++ * 1 - bilinear interpolation processing ++ **/ ++void ispresizer_enable_cbilin(u8 enable) ++{ ++ DPRINTK_ISPRESZ("ispresizer_enable_cbilin()+\n"); ++ isp_reg_and_or(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT, ~ISPRSZ_CNT_CBILIN, ++ (enable ? ISPRSZ_CNT_CBILIN : 0)); ++ DPRINTK_ISPRESZ("ispresizer_enable_cbilin()-\n"); ++} ++EXPORT_SYMBOL(ispresizer_enable_cbilin); ++ ++/** ++ * ispresizer_config_luma_enhance - Configures luminance enhancer parameters. ++ * @yenh: Pointer to structure containing desired values for core, slope, gain ++ * and algo parameters. ++ **/ ++void ispresizer_config_luma_enhance(struct isprsz_yenh *yenh) ++{ ++ DPRINTK_ISPRESZ("ispresizer_config_luma_enhance()+\n"); ++ ispres_obj.algo = yenh->algo; ++ isp_reg_writel((yenh->algo << ISPRSZ_YENH_ALGO_SHIFT) | ++ (yenh->gain << ISPRSZ_YENH_GAIN_SHIFT) | ++ (yenh->slope << ISPRSZ_YENH_SLOP_SHIFT) | ++ (yenh->coreoffset << ISPRSZ_YENH_CORE_SHIFT), ++ OMAP3_ISP_IOMEM_RESZ, ++ ISPRSZ_YENH); ++ DPRINTK_ISPRESZ("ispresizer_config_luma_enhance()-\n"); ++} ++EXPORT_SYMBOL(ispresizer_config_luma_enhance); ++ ++/** ++ * ispresizer_config_filter_coef - Sets filter coefficients for 4 & 7-tap mode. ++ * This API just updates the isp_res struct.Actual register write happens in ++ * ispresizer_config_size. ++ * @coef: Structure containing horizontal and vertical filter coefficients for ++ * both 4-tap and 7-tap mode. ++ **/ ++void ispresizer_config_filter_coef(struct isprsz_coef *coef) ++{ ++ int i; ++ DPRINTK_ISPRESZ("ispresizer_config_filter_coef()+\n"); ++ for (i = 0; i < 32; i++) { ++ ispres_obj.coeflist.h_filter_coef_4tap[i] = ++ coef->h_filter_coef_4tap[i]; ++ ispres_obj.coeflist.v_filter_coef_4tap[i] = ++ coef->v_filter_coef_4tap[i]; ++ } ++ for (i = 0; i < 28; i++) { ++ ispres_obj.coeflist.h_filter_coef_7tap[i] = ++ coef->h_filter_coef_7tap[i]; ++ ispres_obj.coeflist.v_filter_coef_7tap[i] = ++ coef->v_filter_coef_7tap[i]; ++ } ++ DPRINTK_ISPRESZ("ispresizer_config_filter_coef()-\n"); ++} ++EXPORT_SYMBOL(ispresizer_config_filter_coef); ++ ++/** ++ * ispresizer_config_inlineoffset - Configures the read address line offset. ++ * @offset: Line Offset for the input image. ++ * ++ * Returns 0 if successful, or -EINVAL if offset is not 32 bits aligned. ++ **/ ++int ispresizer_config_inlineoffset(u32 offset) ++{ ++ DPRINTK_ISPRESZ("ispresizer_config_inlineoffset()+\n"); ++ if (offset % 32) ++ return -EINVAL; ++ isp_reg_writel(offset << ISPRSZ_SDR_INOFF_OFFSET_SHIFT, ++ OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_INOFF); ++ DPRINTK_ISPRESZ("ispresizer_config_inlineoffset()-\n"); ++ return 0; ++} ++EXPORT_SYMBOL(ispresizer_config_inlineoffset); ++ ++/** ++ * ispresizer_set_inaddr - Sets the memory address of the input frame. ++ * @addr: 32bit memory address aligned on 32byte boundary. ++ * ++ * Returns 0 if successful, or -EINVAL if address is not 32 bits aligned. ++ **/ ++int ispresizer_set_inaddr(u32 addr) ++{ ++ DPRINTK_ISPRESZ("ispresizer_set_inaddr()+\n"); ++ if (addr % 32) ++ return -EINVAL; ++ isp_reg_writel(addr << ISPRSZ_SDR_INADD_ADDR_SHIFT, ++ OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_INADD); ++ ispres_obj.tmp_buf = addr; ++ DPRINTK_ISPRESZ("ispresizer_set_inaddr()-\n"); ++ return 0; ++} ++EXPORT_SYMBOL(ispresizer_set_inaddr); ++ ++/** ++ * ispresizer_config_outlineoffset - Configures the write address line offset. ++ * @offset: Line offset for the preview output. ++ * ++ * Returns 0 if successful, or -EINVAL if address is not 32 bits aligned. ++ **/ ++int ispresizer_config_outlineoffset(u32 offset) ++{ ++ DPRINTK_ISPRESZ("ispresizer_config_outlineoffset()+\n"); ++ if (offset % 32) ++ return -EINVAL; ++ isp_reg_writel(offset << ISPRSZ_SDR_OUTOFF_OFFSET_SHIFT, ++ OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_OUTOFF); ++ DPRINTK_ISPRESZ("ispresizer_config_outlineoffset()-\n"); ++ return 0; ++} ++EXPORT_SYMBOL(ispresizer_config_outlineoffset); ++ ++/** ++ * Configures the memory address to which the output frame is written. ++ * @addr: 32bit memory address aligned on 32byte boundary. ++ **/ ++int ispresizer_set_outaddr(u32 addr) ++{ ++ DPRINTK_ISPRESZ("ispresizer_set_outaddr()+\n"); ++ if (addr % 32) ++ return -EINVAL; ++ isp_reg_writel(addr << ISPRSZ_SDR_OUTADD_ADDR_SHIFT, ++ OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_OUTADD); ++ DPRINTK_ISPRESZ("ispresizer_set_outaddr()-\n"); ++ return 0; ++} ++EXPORT_SYMBOL(ispresizer_set_outaddr); ++ ++/** ++ * ispresizer_save_context - Saves the values of the resizer module registers. ++ **/ ++void ispresizer_save_context(void) ++{ ++ DPRINTK_ISPRESZ("Saving context\n"); ++ isp_save_context(isprsz_reg_list); ++} ++EXPORT_SYMBOL(ispresizer_save_context); ++ ++/** ++ * ispresizer_restore_context - Restores resizer module register values. ++ **/ ++void ispresizer_restore_context(void) ++{ ++ DPRINTK_ISPRESZ("Restoring context\n"); ++ isp_restore_context(isprsz_reg_list); ++} ++EXPORT_SYMBOL(ispresizer_restore_context); ++ ++/** ++ * ispresizer_print_status - Prints the values of the resizer module registers. ++ **/ ++void ispresizer_print_status() ++{ ++ if (!is_ispresz_debug_enabled()) ++ return; ++ DPRINTK_ISPRESZ("###ISP_CTRL inresizer =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_CTRL)); ++ DPRINTK_ISPRESZ("###ISP_IRQ0ENABLE in resizer =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE)); ++ DPRINTK_ISPRESZ("###ISP_IRQ0STATUS in resizer =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS)); ++ DPRINTK_ISPRESZ("###RSZ PCR =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_PCR)); ++ DPRINTK_ISPRESZ("###RSZ CNT =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_CNT)); ++ DPRINTK_ISPRESZ("###RSZ OUT SIZE =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_OUT_SIZE)); ++ DPRINTK_ISPRESZ("###RSZ IN START =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_IN_START)); ++ DPRINTK_ISPRESZ("###RSZ IN SIZE =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_IN_SIZE)); ++ DPRINTK_ISPRESZ("###RSZ SDR INADD =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_INADD)); ++ DPRINTK_ISPRESZ("###RSZ SDR INOFF =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_INOFF)); ++ DPRINTK_ISPRESZ("###RSZ SDR OUTADD =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_OUTADD)); ++ DPRINTK_ISPRESZ("###RSZ SDR OTOFF =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_SDR_OUTOFF)); ++ DPRINTK_ISPRESZ("###RSZ YENH =0x%x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_RESZ, ISPRSZ_YENH)); ++} ++EXPORT_SYMBOL(ispresizer_print_status); ++ ++/** ++ * isp_resizer_init - Module Initialisation. ++ * ++ * Always returns 0. ++ **/ ++int __init isp_resizer_init(void) ++{ ++ mutex_init(&ispres_obj.ispres_mutex); ++ ispres_obj.pm_state = 0; ++ return 0; ++} ++ ++/** ++ * isp_resizer_cleanup - Module Cleanup. ++ **/ ++void isp_resizer_cleanup(void) ++{ ++} +diff --git a/drivers/media/video/isp/ispresizer.h b/drivers/media/video/isp/ispresizer.h +new file mode 100644 +index 0000000..4e92225 +--- /dev/null ++++ b/drivers/media/video/isp/ispresizer.h +@@ -0,0 +1,158 @@ ++/* ++ * ispresizer.h ++ * ++ * Driver header file for Resizer module in TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * Contributors: ++ * Sameer Venkatraman ++ * Mohit Jalori ++ * Sergio Aguirre ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#ifndef OMAP_ISP_RESIZER_H ++#define OMAP_ISP_RESIZER_H ++ ++/* ++ * Resizer Constants ++ */ ++#define MAX_IN_WIDTH_MEMORY_MODE 4095 ++ ++#define MAX_IN_WIDTH_ONTHEFLY_MODE 1280 ++#define MAX_IN_WIDTH_ONTHEFLY_MODE_ES2 4095 ++#define MAX_IN_HEIGHT 4095 ++#define MINIMUM_RESIZE_VALUE 64 ++#define MAXIMUM_RESIZE_VALUE 1024 ++#define MID_RESIZE_VALUE 512 ++ ++#define MAX_7TAP_HRSZ_OUTWIDTH 1280 ++#define MAX_7TAP_VRSZ_OUTWIDTH 640 ++ ++#define MAX_7TAP_HRSZ_OUTWIDTH_ES2 3300 ++#define MAX_7TAP_VRSZ_OUTWIDTH_ES2 1650 ++ ++#define DEFAULTSTPIXEL 0 ++#define DEFAULTSTPHASE 1 ++#define DEFAULTHSTPIXEL4TAPMODE 3 ++#define FOURPHASE 4 ++#define EIGHTPHASE 8 ++#define RESIZECONSTANT 256 ++#define SHIFTER4TAPMODE 0 ++#define SHIFTER7TAPMODE 1 ++#define DEFAULTOFFSET 7 ++#define OFFSETVERT4TAPMODE 4 ++#define OPWDALIGNCONSTANT 0xfffffff0 ++ ++/* ++ * The client is supposed to call resizer API in the following sequence: ++ * - request() ++ * - config_datatpath() ++ * - optionally config/enable sub modules ++ * - try/config size ++ * - setup callback ++ * - setup in/out memory offsets and ptrs ++ * - enable() ++ * ... ++ * - disable() ++ * - free() ++ */ ++ ++enum ispresizer_input { ++ RSZ_OTFLY_YUV, ++ RSZ_MEM_YUV, ++ RSZ_MEM_COL8 ++}; ++ ++/** ++ * struct isprsz_coef - Structure for resizer filter coeffcients. ++ * @h_filter_coef_4tap: Horizontal filter coefficients for 8-phase/4-tap ++ * mode (.5x-4x) ++ * @v_filter_coef_4tap: Vertical filter coefficients for 8-phase/4-tap ++ * mode (.5x-4x) ++ * @h_filter_coef_7tap: Horizontal filter coefficients for 4-phase/7-tap ++ * mode (.25x-.5x) ++ * @v_filter_coef_7tap: Vertical filter coefficients for 4-phase/7-tap ++ * mode (.25x-.5x) ++ */ ++struct isprsz_coef { ++ u16 h_filter_coef_4tap[32]; ++ u16 v_filter_coef_4tap[32]; ++ u16 h_filter_coef_7tap[28]; ++ u16 v_filter_coef_7tap[28]; ++}; ++ ++/** ++ * struct isprsz_yenh - Structure for resizer luminance enhancer parameters. ++ * @algo: Algorithm select. ++ * @gain: Maximum gain. ++ * @slope: Slope. ++ * @coreoffset: Coring offset. ++ */ ++struct isprsz_yenh { ++ u8 algo; ++ u8 gain; ++ u8 slope; ++ u8 coreoffset; ++}; ++ ++void ispresizer_config_shadow_registers(void); ++ ++int ispresizer_request(void); ++ ++int ispresizer_free(void); ++ ++int ispresizer_config_datapath(enum ispresizer_input input); ++ ++void ispresizer_enable_cbilin(u8 enable); ++ ++void ispresizer_config_ycpos(u8 yc); ++ ++void ispresizer_config_startphase(u8 hstartphase, u8 vstartphase); ++ ++void ispresizer_config_filter_coef(struct isprsz_coef *coef); ++ ++void ispresizer_config_luma_enhance(struct isprsz_yenh *yenh); ++ ++int ispresizer_try_size(u32 *input_w, u32 *input_h, u32 *output_w, ++ u32 *output_h); ++ ++void ispresizer_applycrop(void); ++ ++void ispresizer_trycrop(u32 left, u32 top, u32 width, u32 height, u32 ow, ++ u32 oh); ++ ++int ispresizer_config_size(u32 input_w, u32 input_h, u32 output_w, ++ u32 output_h); ++ ++int ispresizer_config_inlineoffset(u32 offset); ++ ++int ispresizer_set_inaddr(u32 addr); ++ ++int ispresizer_config_outlineoffset(u32 offset); ++ ++int ispresizer_set_outaddr(u32 addr); ++ ++void ispresizer_enable(int enable); ++ ++void ispresizer_suspend(void); ++ ++void ispresizer_resume(void); ++ ++int ispresizer_busy(void); ++ ++void ispresizer_save_context(void); ++ ++void ispresizer_restore_context(void); ++ ++void ispresizer_print_status(void); ++ ++#endif /* OMAP_ISP_RESIZER_H */ +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0006-omap3isp-Add-statistics-collection-modules-H3A-and.patch b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0006-omap3isp-Add-statistics-collection-modules-H3A-and.patch new file mode 100644 index 000000000..876ce780f --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0006-omap3isp-Add-statistics-collection-modules-H3A-and.patch @@ -0,0 +1,2741 @@ +From 9a39eab5ed1b70711c3b10de95cd90749293ef7a Mon Sep 17 00:00:00 2001 +From: Sakari Ailus +Date: Tue, 10 Mar 2009 10:49:02 +0200 +Subject: [PATCH] omap3isp: Add statistics collection modules (H3A and HIST) + +Signed-off-by: Sakari Ailus +--- + drivers/media/video/isp/isp_af.c | 784 +++++++++++++++++++++++++++++++ + drivers/media/video/isp/isp_af.h | 125 +++++ + drivers/media/video/isp/isph3a.c | 932 +++++++++++++++++++++++++++++++++++++ + drivers/media/video/isp/isph3a.h | 127 +++++ + drivers/media/video/isp/isphist.c | 608 ++++++++++++++++++++++++ + drivers/media/video/isp/isphist.h | 105 +++++ + 6 files changed, 2681 insertions(+), 0 deletions(-) + create mode 100644 drivers/media/video/isp/isp_af.c + create mode 100644 drivers/media/video/isp/isp_af.h + create mode 100644 drivers/media/video/isp/isph3a.c + create mode 100644 drivers/media/video/isp/isph3a.h + create mode 100644 drivers/media/video/isp/isphist.c + create mode 100644 drivers/media/video/isp/isphist.h + +diff --git a/drivers/media/video/isp/isp_af.c b/drivers/media/video/isp/isp_af.c +new file mode 100644 +index 0000000..a607b97 +--- /dev/null ++++ b/drivers/media/video/isp/isp_af.c +@@ -0,0 +1,784 @@ ++/* ++ * isp_af.c ++ * ++ * AF module for TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * Contributors: ++ * Sergio Aguirre ++ * Troy Laramy ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++/* Linux specific include files */ ++#include ++ ++#include ++#include ++#include ++ ++#include "isp.h" ++#include "ispreg.h" ++#include "isph3a.h" ++#include "isp_af.h" ++#include "ispmmu.h" ++ ++/** ++ * struct isp_af_buffer - AF frame stats buffer. ++ * @virt_addr: Virtual address to mmap the buffer. ++ * @phy_addr: Physical address of the buffer. ++ * @addr_align: Virtual Address 32 bytes aligned. ++ * @ispmmu_addr: Address of the buffer mapped by the ISPMMU. ++ * @mmap_addr: Mapped memory area of buffer. For userspace access. ++ * @locked: 1 - Buffer locked from write. 0 - Buffer can be overwritten. ++ * @frame_num: Frame number from which the statistics are taken. ++ * @lens_position: Lens position currently set in the DW9710 Coil motor driver. ++ * @next: Pointer to link next buffer. ++ */ ++struct isp_af_buffer { ++ unsigned long virt_addr; ++ unsigned long phy_addr; ++ unsigned long addr_align; ++ unsigned long ispmmu_addr; ++ unsigned long mmap_addr; ++ ++ u8 locked; ++ u16 frame_num; ++ u32 config_counter; ++ struct isp_af_xtrastats xtrastats; ++ struct isp_af_buffer *next; ++}; ++ ++/** ++ * struct isp_af_status - AF status. ++ * @initialized: 1 - Buffers initialized. ++ * @update: 1 - Update registers. ++ * @stats_req: 1 - Future stats requested. ++ * @stats_done: 1 - Stats ready for user. ++ * @frame_req: Number of frame requested for statistics. ++ * @af_buff: Array of statistics buffers to access. ++ * @stats_buf_size: Statistics buffer size. ++ * @curr_cfg_buf_size: Current user configured stats buff size. ++ * @min_buf_size: Minimum statisitics buffer size. ++ * @frame_count: Frame Count. ++ * @stats_wait: Wait primitive for locking/unlocking the stats request. ++ * @buffer_lock: Spinlock for statistics buffers access. ++ */ ++static struct isp_af_status { ++ u8 initialized; ++ u8 update; ++ u8 stats_req; ++ u8 stats_done; ++ u16 frame_req; ++ ++ struct isp_af_buffer af_buff[H3A_MAX_BUFF]; ++ unsigned int stats_buf_size; ++ unsigned int min_buf_size; ++ unsigned int curr_cfg_buf_size; ++ ++ int pm_state; ++ u32 frame_count; ++ wait_queue_head_t stats_wait; ++ atomic_t config_counter; ++ spinlock_t buffer_lock; /* For stats buffers read/write sync */ ++} afstat; ++ ++struct af_device *af_dev_configptr; ++static struct isp_af_buffer *active_buff; ++static int af_major = -1; ++static int camnotify; ++ ++/** ++ * isp_af_setxtrastats - Receives extra statistics from prior frames. ++ * @xtrastats: Pointer to structure containing extra statistics fields like ++ * field count and timestamp of frame. ++ * ++ * Called from update_vbq in camera driver ++ **/ ++void isp_af_setxtrastats(struct isp_af_xtrastats *xtrastats, u8 updateflag) ++{ ++ int i, past_i; ++ ++ if (active_buff == NULL) ++ return; ++ ++ for (i = 0; i < H3A_MAX_BUFF; i++) { ++ if (afstat.af_buff[i].frame_num == active_buff->frame_num) ++ break; ++ } ++ ++ if (i == H3A_MAX_BUFF) ++ return; ++ ++ if (i == 0) { ++ if (afstat.af_buff[H3A_MAX_BUFF - 1].locked == 0) ++ past_i = H3A_MAX_BUFF - 1; ++ else ++ past_i = H3A_MAX_BUFF - 2; ++ } else if (i == 1) { ++ if (afstat.af_buff[0].locked == 0) ++ past_i = 0; ++ else ++ past_i = H3A_MAX_BUFF - 1; ++ } else { ++ if (afstat.af_buff[i - 1].locked == 0) ++ past_i = i - 1; ++ else ++ past_i = i - 2; ++ } ++ ++ if (updateflag & AF_UPDATEXS_TS) ++ afstat.af_buff[past_i].xtrastats.ts = xtrastats->ts; ++ ++ if (updateflag & AF_UPDATEXS_FIELDCOUNT) ++ afstat.af_buff[past_i].xtrastats.field_count = ++ xtrastats->field_count; ++} ++EXPORT_SYMBOL(isp_af_setxtrastats); ++ ++/* ++ * Helper function to update buffer cache pages ++ */ ++static void isp_af_update_req_buffer(struct isp_af_buffer *buffer) ++{ ++ int size = afstat.stats_buf_size; ++ ++ size = PAGE_ALIGN(size); ++ /* Update the kernel pages of the requested buffer */ ++ dmac_inv_range((void *)buffer->addr_align, (void *)buffer->addr_align + ++ size); ++} ++ ++#define IS_OUT_OF_BOUNDS(value, min, max) \ ++ (((value) < (min)) || ((value) > (max))) ++ ++/* Function to check paxel parameters */ ++int isp_af_check_paxel(void) ++{ ++ struct af_paxel *paxel_cfg = &af_dev_configptr->config->paxel_config; ++ struct af_iir *iir_cfg = &af_dev_configptr->config->iir_config; ++ ++ /* Check horizontal Count */ ++ if (IS_OUT_OF_BOUNDS(paxel_cfg->hz_cnt, AF_PAXEL_HORIZONTAL_COUNT_MIN, ++ AF_PAXEL_HORIZONTAL_COUNT_MAX)) { ++ DPRINTK_ISP_AF("Error : Horizontal Count is incorrect"); ++ return -AF_ERR_HZ_COUNT; ++ } ++ ++ /*Check Vertical Count */ ++ if (IS_OUT_OF_BOUNDS(paxel_cfg->vt_cnt, AF_PAXEL_VERTICAL_COUNT_MIN, ++ AF_PAXEL_VERTICAL_COUNT_MAX)) { ++ DPRINTK_ISP_AF("Error : Vertical Count is incorrect"); ++ return -AF_ERR_VT_COUNT; ++ } ++ ++ /*Check Height */ ++ if (IS_OUT_OF_BOUNDS(paxel_cfg->height, AF_PAXEL_HEIGHT_MIN, ++ AF_PAXEL_HEIGHT_MAX)) { ++ DPRINTK_ISP_AF("Error : Height is incorrect"); ++ return -AF_ERR_HEIGHT; ++ } ++ ++ /*Check width */ ++ if (IS_OUT_OF_BOUNDS(paxel_cfg->width, AF_PAXEL_WIDTH_MIN, ++ AF_PAXEL_WIDTH_MAX)) { ++ DPRINTK_ISP_AF("Error : Width is incorrect"); ++ return -AF_ERR_WIDTH; ++ } ++ ++ /*Check Line Increment */ ++ if (IS_OUT_OF_BOUNDS(paxel_cfg->line_incr, AF_PAXEL_INCREMENT_MIN, ++ AF_PAXEL_INCREMENT_MAX)) { ++ DPRINTK_ISP_AF("Error : Line Increment is incorrect"); ++ return -AF_ERR_INCR; ++ } ++ ++ /*Check Horizontal Start */ ++ if ((paxel_cfg->hz_start % 2 != 0) || ++ (paxel_cfg->hz_start < (iir_cfg->hz_start_pos + 2)) || ++ IS_OUT_OF_BOUNDS(paxel_cfg->hz_start, ++ AF_PAXEL_HZSTART_MIN, AF_PAXEL_HZSTART_MAX)) { ++ DPRINTK_ISP_AF("Error : Horizontal Start is incorrect"); ++ return -AF_ERR_HZ_START; ++ } ++ ++ /*Check Vertical Start */ ++ if (IS_OUT_OF_BOUNDS(paxel_cfg->vt_start, AF_PAXEL_VTSTART_MIN, ++ AF_PAXEL_VTSTART_MAX)) { ++ DPRINTK_ISP_AF("Error : Vertical Start is incorrect"); ++ return -AF_ERR_VT_START; ++ } ++ return 0; ++} ++ ++/** ++ * isp_af_check_iir - Function to check IIR Coefficient. ++ **/ ++int isp_af_check_iir(void) ++{ ++ struct af_iir *iir_cfg = &af_dev_configptr->config->iir_config; ++ int index; ++ ++ for (index = 0; index < AF_NUMBER_OF_COEF; index++) { ++ if ((iir_cfg->coeff_set0[index]) > AF_COEF_MAX) { ++ DPRINTK_ISP_AF("Error : Coefficient for set 0 is " ++ "incorrect"); ++ return -AF_ERR_IIR_COEF; ++ } ++ ++ if ((iir_cfg->coeff_set1[index]) > AF_COEF_MAX) { ++ DPRINTK_ISP_AF("Error : Coefficient for set 1 is " ++ "incorrect"); ++ return -AF_ERR_IIR_COEF; ++ } ++ } ++ ++ if (IS_OUT_OF_BOUNDS(iir_cfg->hz_start_pos, AF_IIRSH_MIN, ++ AF_IIRSH_MAX)) { ++ DPRINTK_ISP_AF("Error : IIRSH is incorrect"); ++ return -AF_ERR_IIRSH; ++ } ++ ++ return 0; ++} ++/** ++ * isp_af_unlock_buffers - Helper function to unlock all buffers. ++ **/ ++static void isp_af_unlock_buffers(void) ++{ ++ int i; ++ unsigned long irqflags; ++ ++ spin_lock_irqsave(&afstat.buffer_lock, irqflags); ++ for (i = 0; i < H3A_MAX_BUFF; i++) ++ afstat.af_buff[i].locked = 0; ++ ++ spin_unlock_irqrestore(&afstat.buffer_lock, irqflags); ++} ++ ++/* ++ * Helper function to link allocated buffers ++ */ ++static void isp_af_link_buffers(void) ++{ ++ int i; ++ ++ for (i = 0; i < H3A_MAX_BUFF; i++) { ++ if ((i + 1) < H3A_MAX_BUFF) ++ afstat.af_buff[i].next = &afstat.af_buff[i + 1]; ++ else ++ afstat.af_buff[i].next = &afstat.af_buff[0]; ++ } ++} ++ ++/* Function to perform hardware set up */ ++int isp_af_configure(struct af_configuration *afconfig) ++{ ++ int result; ++ int buff_size, i; ++ unsigned int busyaf; ++ struct af_configuration *af_curr_cfg = af_dev_configptr->config; ++ ++ if (NULL == afconfig) { ++ printk(KERN_ERR "Null argument in configuration. \n"); ++ return -EINVAL; ++ } ++ ++ memcpy(af_curr_cfg, afconfig, sizeof(struct af_configuration)); ++ /* Get the value of PCR register */ ++ busyaf = isp_reg_readl(OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR); ++ ++ if ((busyaf & AF_BUSYAF) == AF_BUSYAF) { ++ DPRINTK_ISP_AF("AF_register_setup_ERROR : Engine Busy"); ++ DPRINTK_ISP_AF("\n Configuration cannot be done "); ++ return -AF_ERR_ENGINE_BUSY; ++ } ++ ++ /* Check IIR Coefficient and start Values */ ++ result = isp_af_check_iir(); ++ if (result < 0) ++ return result; ++ ++ /* Check Paxel Values */ ++ result = isp_af_check_paxel(); ++ if (result < 0) ++ return result; ++ ++ /* Check HMF Threshold Values */ ++ if (af_curr_cfg->hmf_config.threshold > AF_THRESHOLD_MAX) { ++ DPRINTK_ISP_AF("Error : HMF Threshold is incorrect"); ++ return -AF_ERR_THRESHOLD; ++ } ++ ++ /* Compute buffer size */ ++ buff_size = (af_curr_cfg->paxel_config.hz_cnt + 1) * ++ (af_curr_cfg->paxel_config.vt_cnt + 1) * AF_PAXEL_SIZE; ++ ++ afstat.curr_cfg_buf_size = buff_size; ++ /* Deallocate the previous buffers */ ++ if (afstat.stats_buf_size && buff_size > afstat.stats_buf_size) { ++ isp_af_enable(0); ++ for (i = 0; i < H3A_MAX_BUFF; i++) { ++ ispmmu_kunmap(afstat.af_buff[i].ispmmu_addr); ++ dma_free_coherent( ++ NULL, afstat.min_buf_size, ++ (void *)afstat.af_buff[i].virt_addr, ++ (dma_addr_t)afstat.af_buff[i].phy_addr); ++ afstat.af_buff[i].virt_addr = 0; ++ } ++ afstat.stats_buf_size = 0; ++ } ++ ++ if (!afstat.af_buff[0].virt_addr) { ++ afstat.stats_buf_size = buff_size; ++ afstat.min_buf_size = PAGE_ALIGN(afstat.stats_buf_size); ++ ++ for (i = 0; i < H3A_MAX_BUFF; i++) { ++ afstat.af_buff[i].virt_addr = ++ (unsigned long)dma_alloc_coherent( ++ NULL, ++ afstat.min_buf_size, ++ (dma_addr_t *) ++ &afstat.af_buff[i].phy_addr, ++ GFP_KERNEL | GFP_DMA); ++ if (afstat.af_buff[i].virt_addr == 0) { ++ printk(KERN_ERR "Can't acquire memory for " ++ "buffer[%d]\n", i); ++ return -ENOMEM; ++ } ++ afstat.af_buff[i].addr_align = ++ afstat.af_buff[i].virt_addr; ++ while ((afstat.af_buff[i].addr_align & 0xFFFFFFC0) != ++ afstat.af_buff[i].addr_align) ++ afstat.af_buff[i].addr_align++; ++ afstat.af_buff[i].ispmmu_addr = ++ ispmmu_kmap(afstat.af_buff[i].phy_addr, ++ afstat.min_buf_size); ++ } ++ isp_af_unlock_buffers(); ++ isp_af_link_buffers(); ++ ++ /* First active buffer */ ++ if (active_buff == NULL) ++ active_buff = &afstat.af_buff[0]; ++ isp_af_set_address(active_buff->ispmmu_addr); ++ } ++ ++ result = isp_af_register_setup(af_dev_configptr); ++ if (result < 0) ++ return result; ++ af_dev_configptr->size_paxel = buff_size; ++ atomic_inc(&afstat.config_counter); ++ afstat.initialized = 1; ++ afstat.frame_count = 1; ++ active_buff->frame_num = 1; ++ /* Set configuration flag to indicate HW setup done */ ++ if (af_curr_cfg->af_config) ++ isp_af_enable(1); ++ else ++ isp_af_enable(0); ++ ++ /* Success */ ++ return 0; ++} ++EXPORT_SYMBOL(isp_af_configure); ++ ++int isp_af_register_setup(struct af_device *af_dev) ++{ ++ unsigned int pcr = 0, pax1 = 0, pax2 = 0, paxstart = 0; ++ unsigned int coef = 0; ++ unsigned int base_coef_set0 = 0; ++ unsigned int base_coef_set1 = 0; ++ int index; ++ ++ /* Configure Hardware Registers */ ++ /* Read PCR Register */ ++ pcr = isp_reg_readl(OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR); ++ ++ /* Set Accumulator Mode */ ++ if (af_dev->config->mode == ACCUMULATOR_PEAK) ++ pcr |= FVMODE; ++ else ++ pcr &= ~FVMODE; ++ ++ /* Set A-law */ ++ if (af_dev->config->alaw_enable == H3A_AF_ALAW_ENABLE) ++ pcr |= AF_ALAW_EN; ++ else ++ pcr &= ~AF_ALAW_EN; ++ ++ /* Set RGB Position */ ++ pcr &= ~RGBPOS; ++ pcr |= af_dev->config->rgb_pos << AF_RGBPOS_SHIFT; ++ ++ /* HMF Configurations */ ++ if (af_dev->config->hmf_config.enable == H3A_AF_HMF_ENABLE) { ++ pcr &= ~AF_MED_EN; ++ /* Enable HMF */ ++ pcr |= AF_MED_EN; ++ ++ /* Set Median Threshold */ ++ pcr &= ~MED_TH; ++ pcr |= af_dev->config->hmf_config.threshold << AF_MED_TH_SHIFT; ++ } else ++ pcr &= ~AF_MED_EN; ++ ++ /* Set PCR Register */ ++ isp_reg_writel(pcr, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR); ++ ++ pax1 &= ~PAXW; ++ pax1 |= af_dev->config->paxel_config.width << AF_PAXW_SHIFT; ++ ++ /* Set height in AFPAX1 */ ++ pax1 &= ~PAXH; ++ pax1 |= af_dev->config->paxel_config.height; ++ ++ isp_reg_writel(pax1, OMAP3_ISP_IOMEM_H3A, ISPH3A_AFPAX1); ++ ++ /* Configure AFPAX2 Register */ ++ /* Set Line Increment in AFPAX2 Register */ ++ pax2 &= ~AFINCV; ++ pax2 |= af_dev->config->paxel_config.line_incr << AF_LINE_INCR_SHIFT; ++ /* Set Vertical Count */ ++ pax2 &= ~PAXVC; ++ pax2 |= af_dev->config->paxel_config.vt_cnt << AF_VT_COUNT_SHIFT; ++ /* Set Horizontal Count */ ++ pax2 &= ~PAXHC; ++ pax2 |= af_dev->config->paxel_config.hz_cnt; ++ isp_reg_writel(pax2, OMAP3_ISP_IOMEM_H3A, ISPH3A_AFPAX2); ++ ++ /* Configure PAXSTART Register */ ++ /*Configure Horizontal Start */ ++ paxstart &= ~PAXSH; ++ paxstart |= af_dev->config->paxel_config.hz_start << AF_HZ_START_SHIFT; ++ /* Configure Vertical Start */ ++ paxstart &= ~PAXSV; ++ paxstart |= af_dev->config->paxel_config.vt_start; ++ isp_reg_writel(paxstart, OMAP3_ISP_IOMEM_H3A, ISPH3A_AFPAXSTART); ++ ++ /*SetIIRSH Register */ ++ isp_reg_writel(af_dev->config->iir_config.hz_start_pos, ++ OMAP3_ISP_IOMEM_H3A, ISPH3A_AFIIRSH); ++ ++ /*Set IIR Filter0 Coefficients */ ++ base_coef_set0 = ISPH3A_AFCOEF010; ++ for (index = 0; index <= 8; index += 2) { ++ coef &= ~COEF_MASK0; ++ coef |= af_dev->config->iir_config.coeff_set0[index]; ++ coef &= ~COEF_MASK1; ++ coef |= af_dev->config->iir_config.coeff_set0[index + 1] << ++ AF_COEF_SHIFT; ++ isp_reg_writel(coef, OMAP3_ISP_IOMEM_H3A, base_coef_set0); ++ base_coef_set0 = base_coef_set0 + AFCOEF_OFFSET; ++ } ++ ++ /* set AFCOEF0010 Register */ ++ isp_reg_writel(af_dev->config->iir_config.coeff_set0[10], ++ OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF010); ++ ++ /*Set IIR Filter1 Coefficients */ ++ ++ base_coef_set1 = ISPH3A_AFCOEF110; ++ for (index = 0; index <= 8; index += 2) { ++ coef &= ~COEF_MASK0; ++ coef |= af_dev->config->iir_config.coeff_set1[index]; ++ coef &= ~COEF_MASK1; ++ coef |= af_dev->config->iir_config.coeff_set1[index + 1] << ++ AF_COEF_SHIFT; ++ isp_reg_writel(coef, OMAP3_ISP_IOMEM_H3A, base_coef_set1); ++ ++ base_coef_set1 = base_coef_set1 + AFCOEF_OFFSET; ++ } ++ isp_reg_writel(af_dev->config->iir_config.coeff_set1[10], ++ OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF1010); ++ ++ return 0; ++} ++ ++/* Function to set address */ ++void isp_af_set_address(unsigned long address) ++{ ++ isp_reg_writel(address, OMAP3_ISP_IOMEM_H3A, ISPH3A_AFBUFST); ++} ++ ++static int isp_af_stats_available(struct isp_af_data *afdata) ++{ ++ int i, ret; ++ unsigned long irqflags; ++ ++ spin_lock_irqsave(&afstat.buffer_lock, irqflags); ++ for (i = 0; i < H3A_MAX_BUFF; i++) { ++ DPRINTK_ISP_AF("Checking Stats buff[%d] (%d) for %d\n", ++ i, afstat.af_buff[i].frame_num, ++ afdata->frame_number); ++ if (afdata->frame_number == afstat.af_buff[i].frame_num ++ && afstat.af_buff[i].frame_num != active_buff->frame_num) { ++ afstat.af_buff[i].locked = 1; ++ spin_unlock_irqrestore(&afstat.buffer_lock, irqflags); ++ isp_af_update_req_buffer(&afstat.af_buff[i]); ++ afstat.af_buff[i].frame_num = 0; ++ ret = copy_to_user((void *)afdata->af_statistics_buf, ++ (void *)afstat.af_buff[i].virt_addr, ++ afstat.curr_cfg_buf_size); ++ if (ret) { ++ printk(KERN_ERR "Failed copy_to_user for " ++ "H3A stats buff, %d\n", ret); ++ } ++ afdata->xtrastats.ts = afstat.af_buff[i].xtrastats.ts; ++ afdata->xtrastats.field_count = ++ afstat.af_buff[i].xtrastats.field_count; ++ return 0; ++ } ++ } ++ spin_unlock_irqrestore(&afstat.buffer_lock, irqflags); ++ /* Stats unavailable */ ++ ++ return -1; ++} ++ ++void isp_af_notify(int notify) ++{ ++ camnotify = notify; ++ if (camnotify && afstat.initialized) { ++ printk(KERN_DEBUG "Warning Camera Off \n"); ++ afstat.stats_req = 0; ++ afstat.stats_done = 1; ++ wake_up_interruptible(&afstat.stats_wait); ++ } ++} ++EXPORT_SYMBOL(isp_af_notify); ++/* ++ * This API allows the user to update White Balance gains, as well as ++ * exposure time and analog gain. It is also used to request frame ++ * statistics. ++ */ ++int isp_af_request_statistics(struct isp_af_data *afdata) ++{ ++ int ret = 0; ++ u16 frame_diff = 0; ++ u16 frame_cnt = afstat.frame_count; ++ wait_queue_t wqt; ++ ++ if (!af_dev_configptr->config->af_config) { ++ printk(KERN_ERR "AF engine not enabled\n"); ++ return -EINVAL; ++ } ++ ++ if (!(afdata->update & REQUEST_STATISTICS)) { ++ afdata->af_statistics_buf = NULL; ++ goto out; ++ } ++ ++ isp_af_unlock_buffers(); ++ /* Stats available? */ ++ DPRINTK_ISP_AF("Stats available?\n"); ++ ret = isp_af_stats_available(afdata); ++ if (!ret) ++ goto out; ++ ++ /* Stats in near future? */ ++ DPRINTK_ISP_AF("Stats in near future?\n"); ++ if (afdata->frame_number > frame_cnt) ++ frame_diff = afdata->frame_number - frame_cnt; ++ else if (afdata->frame_number < frame_cnt) { ++ if (frame_cnt > MAX_FRAME_COUNT - MAX_FUTURE_FRAMES ++ && afdata->frame_number < MAX_FRAME_COUNT) { ++ frame_diff = afdata->frame_number + MAX_FRAME_COUNT - ++ frame_cnt; ++ } else { ++ /* Frame unavailable */ ++ frame_diff = MAX_FUTURE_FRAMES + 1; ++ } ++ } ++ ++ if (frame_diff > MAX_FUTURE_FRAMES) { ++ printk(KERN_ERR "Invalid frame requested, returning current" ++ " frame stats\n"); ++ afdata->frame_number = frame_cnt; ++ } ++ if (!camnotify) { ++ /* Block until frame in near future completes */ ++ afstat.frame_req = afdata->frame_number; ++ afstat.stats_req = 1; ++ afstat.stats_done = 0; ++ init_waitqueue_entry(&wqt, current); ++ ret = wait_event_interruptible(afstat.stats_wait, ++ afstat.stats_done == 1); ++ if (ret < 0) { ++ afdata->af_statistics_buf = NULL; ++ return ret; ++ } ++ DPRINTK_ISP_AF("ISP AF request status interrupt raised\n"); ++ ++ /* Stats now available */ ++ ret = isp_af_stats_available(afdata); ++ if (ret) { ++ printk(KERN_ERR "After waiting for stats, stats not" ++ " available!!\n"); ++ afdata->af_statistics_buf = NULL; ++ } ++ } ++ ++out: ++ afdata->curr_frame = afstat.frame_count; ++ ++ return 0; ++} ++EXPORT_SYMBOL(isp_af_request_statistics); ++ ++/* This function will handle the H3A interrupt. */ ++static void isp_af_isr(unsigned long status, isp_vbq_callback_ptr arg1, ++ void *arg2) ++{ ++ u16 frame_align; ++ ++ if ((H3A_AF_DONE & status) != H3A_AF_DONE) ++ return; ++ ++ /* timestamp stats buffer */ ++ do_gettimeofday(&active_buff->xtrastats.ts); ++ active_buff->config_counter = atomic_read(&afstat.config_counter); ++ ++ /* Exchange buffers */ ++ active_buff = active_buff->next; ++ if (active_buff->locked == 1) ++ active_buff = active_buff->next; ++ isp_af_set_address(active_buff->ispmmu_addr); ++ ++ /* Update frame counter */ ++ afstat.frame_count++; ++ frame_align = afstat.frame_count; ++ if (afstat.frame_count > MAX_FRAME_COUNT) { ++ afstat.frame_count = 1; ++ frame_align++; ++ } ++ active_buff->frame_num = afstat.frame_count; ++ ++ /* Future Stats requested? */ ++ if (afstat.stats_req) { ++ /* Is the frame we want already done? */ ++ if (frame_align >= afstat.frame_req + 1) { ++ afstat.stats_req = 0; ++ afstat.stats_done = 1; ++ wake_up_interruptible(&afstat.stats_wait); ++ } ++ } ++} ++ ++int __isp_af_enable(int enable) ++{ ++ unsigned int pcr; ++ ++ pcr = isp_reg_readl(OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR); ++ ++ /* Set AF_EN bit in PCR Register */ ++ if (enable) { ++ if (isp_set_callback(CBK_H3A_AF_DONE, isp_af_isr, ++ (void *)NULL, (void *)NULL)) { ++ printk(KERN_ERR "No callback for AF\n"); ++ return -EINVAL; ++ } ++ ++ pcr |= AF_EN; ++ } else { ++ isp_unset_callback(CBK_H3A_AF_DONE); ++ pcr &= ~AF_EN; ++ } ++ isp_reg_writel(pcr, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR); ++ return 0; ++} ++ ++/* Function to Enable/Disable AF Engine */ ++int isp_af_enable(int enable) ++{ ++ int rval; ++ ++ rval = __isp_af_enable(enable); ++ ++ if (!rval) ++ afstat.pm_state = enable; ++ ++ return rval; ++} ++ ++/* Function to Suspend AF Engine */ ++void isp_af_suspend(void) ++{ ++ if (afstat.pm_state) ++ __isp_af_enable(0); ++} ++ ++/* Function to Resume AF Engine */ ++void isp_af_resume(void) ++{ ++ if (afstat.pm_state) ++ __isp_af_enable(1); ++} ++ ++int isp_af_busy(void) ++{ ++ return isp_reg_readl(OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR) ++ & ISPH3A_PCR_BUSYAF; ++} ++ ++/* Function to register the AF character device driver. */ ++int __init isp_af_init(void) ++{ ++ /*allocate memory for device structure and initialize it with 0 */ ++ af_dev_configptr = kzalloc(sizeof(struct af_device), GFP_KERNEL); ++ if (!af_dev_configptr) ++ goto err_nomem1; ++ ++ active_buff = NULL; ++ ++ af_dev_configptr->config = (struct af_configuration *) ++ kzalloc(sizeof(struct af_configuration), GFP_KERNEL); ++ ++ if (af_dev_configptr->config == NULL) ++ goto err_nomem2; ++ ++ memset(&afstat, 0, sizeof(afstat)); ++ ++ init_waitqueue_head(&afstat.stats_wait); ++ spin_lock_init(&afstat.buffer_lock); ++ ++ return 0; ++ ++err_nomem2: ++ kfree(af_dev_configptr); ++err_nomem1: ++ printk(KERN_ERR "Error: kmalloc fail"); ++ return -ENOMEM; ++} ++ ++void isp_af_exit(void) ++{ ++ int i; ++ ++ /* Free buffers */ ++ for (i = 0; i < H3A_MAX_BUFF; i++) { ++ if (!afstat.af_buff[i].phy_addr) ++ continue; ++ ++ ispmmu_kunmap(afstat.af_buff[i].ispmmu_addr); ++ ++ dma_free_coherent(NULL, ++ afstat.min_buf_size, ++ (void *)afstat.af_buff[i].virt_addr, ++ (dma_addr_t)afstat.af_buff[i].phy_addr); ++ } ++ kfree(af_dev_configptr->config); ++ kfree(af_dev_configptr); ++ ++ memset(&afstat, 0, sizeof(afstat)); ++ ++ af_major = -1; ++} +diff --git a/drivers/media/video/isp/isp_af.h b/drivers/media/video/isp/isp_af.h +new file mode 100644 +index 0000000..ee2b89f +--- /dev/null ++++ b/drivers/media/video/isp/isp_af.h +@@ -0,0 +1,125 @@ ++/* ++ * isp_af.h ++ * ++ * Include file for AF module in TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * Contributors: ++ * Sergio Aguirre ++ * Troy Laramy ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++/* Device Constants */ ++#ifndef OMAP_ISP_AF_H ++#define OMAP_ISP_AF_H ++ ++#include ++ ++#define AF_MAJOR_NUMBER 0 ++#define ISPAF_NAME "OMAPISP_AF" ++#define AF_NR_DEVS 1 ++#define AF_TIMEOUT ((300 * HZ) / 1000) ++ ++ ++ ++/* Print Macros */ ++/*list of error code */ ++#define AF_ERR_HZ_COUNT 800 /* Invalid Horizontal Count */ ++#define AF_ERR_VT_COUNT 801 /* Invalid Vertical Count */ ++#define AF_ERR_HEIGHT 802 /* Invalid Height */ ++#define AF_ERR_WIDTH 803 /* Invalid width */ ++#define AF_ERR_INCR 804 /* Invalid Increment */ ++#define AF_ERR_HZ_START 805 /* Invalid horizontal Start */ ++#define AF_ERR_VT_START 806 /* Invalud vertical Start */ ++#define AF_ERR_IIRSH 807 /* Invalid IIRSH value */ ++#define AF_ERR_IIR_COEF 808 /* Invalid Coefficient */ ++#define AF_ERR_SETUP 809 /* Setup not done */ ++#define AF_ERR_THRESHOLD 810 /* Invalid Threshold */ ++#define AF_ERR_ENGINE_BUSY 811 /* Engine is busy */ ++ ++#define AFPID 0x0 /* Peripheral Revision ++ * and Class Information ++ */ ++ ++#define AFCOEF_OFFSET 0x00000004 /* COEFFICIENT BASE ++ * ADDRESS ++ */ ++ ++/* ++ * PCR fields ++ */ ++#define AF_BUSYAF (1 << 15) ++#define FVMODE (1 << 14) ++#define RGBPOS (0x7 << 11) ++#define MED_TH (0xFF << 3) ++#define AF_MED_EN (1 << 2) ++#define AF_ALAW_EN (1 << 1) ++#define AF_EN (1 << 0) ++ ++/* ++ * AFPAX1 fields ++ */ ++#define PAXW (0x7F << 16) ++#define PAXH 0x7F ++ ++/* ++ * AFPAX2 fields ++ */ ++#define AFINCV (0xF << 13) ++#define PAXVC (0x7F << 6) ++#define PAXHC 0x3F ++ ++/* ++ * AFPAXSTART fields ++ */ ++#define PAXSH (0xFFF<<16) ++#define PAXSV 0xFFF ++ ++/* ++ * COEFFICIENT MASK ++ */ ++ ++#define COEF_MASK0 0xFFF ++#define COEF_MASK1 (0xFFF<<16) ++ ++/* BIT SHIFTS */ ++#define AF_RGBPOS_SHIFT 11 ++#define AF_MED_TH_SHIFT 3 ++#define AF_PAXW_SHIFT 16 ++#define AF_LINE_INCR_SHIFT 13 ++#define AF_VT_COUNT_SHIFT 6 ++#define AF_HZ_START_SHIFT 16 ++#define AF_COEF_SHIFT 16 ++ ++#define AF_UPDATEXS_TS (1 << 0) ++#define AF_UPDATEXS_FIELDCOUNT (1 << 1) ++#define AF_UPDATEXS_LENSPOS (1 << 2) ++ ++/* Structure for device of AF Engine */ ++struct af_device { ++ struct af_configuration *config; /*Device configuration structure */ ++ int size_paxel; /*Paxel size in bytes */ ++}; ++ ++int isp_af_check_paxel(void); ++int isp_af_check_iir(void); ++int isp_af_register_setup(struct af_device *af_dev); ++int isp_af_enable(int); ++void isp_af_suspend(void); ++void isp_af_resume(void); ++int isp_af_busy(void); ++void isp_af_notify(int notify); ++int isp_af_request_statistics(struct isp_af_data *afdata); ++int isp_af_configure(struct af_configuration *afconfig); ++void isp_af_set_address(unsigned long); ++void isp_af_setxtrastats(struct isp_af_xtrastats *xtrastats, u8 updateflag); ++#endif /* OMAP_ISP_AF_H */ +diff --git a/drivers/media/video/isp/isph3a.c b/drivers/media/video/isp/isph3a.c +new file mode 100644 +index 0000000..7ff1c5b +--- /dev/null ++++ b/drivers/media/video/isp/isph3a.c +@@ -0,0 +1,932 @@ ++/* ++ * isph3a.c ++ * ++ * H3A module for TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * Contributors: ++ * Sergio Aguirre ++ * Troy Laramy ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#include ++ ++#include ++#include ++ ++#include "isp.h" ++#include "ispreg.h" ++#include "isph3a.h" ++#include "ispmmu.h" ++#include "isppreview.h" ++ ++/** ++ * struct isph3a_aewb_buffer - AE, AWB frame stats buffer. ++ * @virt_addr: Virtual address to mmap the buffer. ++ * @phy_addr: Physical address of the buffer. ++ * @addr_align: Virtual Address 32 bytes aligned. ++ * @ispmmu_addr: Address of the buffer mapped by the ISPMMU. ++ * @mmap_addr: Mapped memory area of buffer. For userspace access. ++ * @locked: 1 - Buffer locked from write. 0 - Buffer can be overwritten. ++ * @frame_num: Frame number from which the statistics are taken. ++ * @next: Pointer to link next buffer. ++ */ ++struct isph3a_aewb_buffer { ++ unsigned long virt_addr; ++ unsigned long phy_addr; ++ unsigned long addr_align; ++ unsigned long ispmmu_addr; ++ unsigned long mmap_addr; /* For userspace */ ++ struct timeval ts; ++ u32 config_counter; ++ ++ u8 locked; ++ u16 frame_num; ++ struct isph3a_aewb_buffer *next; ++}; ++ ++/** ++ * struct isph3a_aewb_status - AE, AWB status. ++ * @initialized: 1 - Buffers initialized. ++ * @update: 1 - Update registers. ++ * @stats_req: 1 - Future stats requested. ++ * @stats_done: 1 - Stats ready for user. ++ * @frame_req: Number of frame requested for statistics. ++ * @h3a_buff: Array of statistics buffers to access. ++ * @stats_buf_size: Statistics buffer size. ++ * @min_buf_size: Minimum statisitics buffer size. ++ * @win_count: Window Count. ++ * @frame_count: Frame Count. ++ * @stats_wait: Wait primitive for locking/unlocking the stats request. ++ * @buffer_lock: Spinlock for statistics buffers access. ++ */ ++static struct isph3a_aewb_status { ++ u8 initialized; ++ u8 update; ++ u8 stats_req; ++ u8 stats_done; ++ u16 frame_req; ++ int pm_state; ++ ++ struct isph3a_aewb_buffer h3a_buff[H3A_MAX_BUFF]; ++ unsigned int stats_buf_size; ++ unsigned int min_buf_size; ++ unsigned int curr_cfg_buf_size; ++ ++ atomic_t config_counter; ++ ++ u16 win_count; ++ u32 frame_count; ++ wait_queue_head_t stats_wait; ++ spinlock_t buffer_lock; /* For stats buffers read/write sync */ ++} aewbstat; ++ ++/** ++ * struct isph3a_aewb_regs - Current value of AE, AWB configuration registers. ++ * reg_pcr: Peripheral control register. ++ * reg_win1: Control register. ++ * reg_start: Start position register. ++ * reg_blk: Black line register. ++ * reg_subwin: Configuration register. ++ */ ++static struct isph3a_aewb_regs { ++ u32 reg_pcr; ++ u32 reg_win1; ++ u32 reg_start; ++ u32 reg_blk; ++ u32 reg_subwin; ++} aewb_regs; ++ ++static struct isph3a_aewb_config aewb_config_local = { ++ .saturation_limit = 0x3FF, ++ .win_height = 0, ++ .win_width = 0, ++ .ver_win_count = 0, ++ .hor_win_count = 0, ++ .ver_win_start = 0, ++ .hor_win_start = 0, ++ .blk_ver_win_start = 0, ++ .blk_win_height = 0, ++ .subsample_ver_inc = 0, ++ .subsample_hor_inc = 0, ++ .alaw_enable = 0, ++ .aewb_enable = 0, ++}; ++ ++/* Structure for saving/restoring h3a module registers */ ++static struct isp_reg isph3a_reg_list[] = { ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR, 0}, /* Should be the first one */ ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWWIN1, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWINSTART, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWINBLK, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWSUBWIN, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWBUFST, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFPAX1, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFPAX2, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFPAXSTART, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFIIRSH, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFBUFST, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF010, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF032, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF054, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF076, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF098, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF0010, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF110, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF132, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF154, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF176, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF198, 0}, ++ {OMAP3_ISP_IOMEM_H3A, ISPH3A_AFCOEF1010, 0}, ++ {0, ISP_TOK_TERM, 0} ++}; ++ ++static struct ispprev_wbal h3awb_update; ++static struct isph3a_aewb_buffer *active_buff; ++static struct isph3a_aewb_xtrastats h3a_xtrastats[H3A_MAX_BUFF]; ++static int camnotify; ++static int wb_update; ++static void isph3a_print_status(void); ++ ++/** ++ * isph3a_aewb_setxtrastats - Receives extra statistics from prior frames. ++ * @xtrastats: Pointer to structure containing extra statistics fields like ++ * field count and timestamp of frame. ++ * ++ * Called from update_vbq in camera driver ++ **/ ++void isph3a_aewb_setxtrastats(struct isph3a_aewb_xtrastats *xtrastats) ++{ ++ int i; ++ ++ if (active_buff == NULL) ++ return; ++ ++ for (i = 0; i < H3A_MAX_BUFF; i++) { ++ if (aewbstat.h3a_buff[i].frame_num != active_buff->frame_num) ++ continue; ++ ++ if (i == 0) { ++ if (aewbstat.h3a_buff[H3A_MAX_BUFF - 1].locked == 0) { ++ h3a_xtrastats[H3A_MAX_BUFF - 1] = ++ *xtrastats; ++ } else { ++ h3a_xtrastats[H3A_MAX_BUFF - 2] = ++ *xtrastats; ++ } ++ } else if (i == 1) { ++ if (aewbstat.h3a_buff[0].locked == 0) ++ h3a_xtrastats[0] = *xtrastats; ++ else { ++ h3a_xtrastats[H3A_MAX_BUFF - 1] = ++ *xtrastats; ++ } ++ } else { ++ if (aewbstat.h3a_buff[i - 1].locked == 0) ++ h3a_xtrastats[i - 1] = *xtrastats; ++ else ++ h3a_xtrastats[i - 2] = *xtrastats; ++ } ++ return; ++ } ++} ++EXPORT_SYMBOL(isph3a_aewb_setxtrastats); ++ ++void __isph3a_aewb_enable(u8 enable) ++{ ++ isp_reg_writel(IRQ0STATUS_H3A_AWB_DONE_IRQ, OMAP3_ISP_IOMEM_MAIN, ++ ISP_IRQ0STATUS); ++ ++ if (enable) { ++ aewb_regs.reg_pcr |= ISPH3A_PCR_AEW_EN; ++ DPRINTK_ISPH3A(" H3A enabled \n"); ++ } else { ++ aewb_regs.reg_pcr &= ~ISPH3A_PCR_AEW_EN; ++ DPRINTK_ISPH3A(" H3A disabled \n"); ++ } ++ isp_reg_and_or(OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR, ~ISPH3A_PCR_AEW_EN, ++ (enable ? ISPH3A_PCR_AEW_EN : 0)); ++ aewb_config_local.aewb_enable = enable; ++} ++ ++/** ++ * isph3a_aewb_enable - Enables AE, AWB engine in the H3A module. ++ * @enable: 1 - Enables the AE & AWB engine. ++ * ++ * Client should configure all the AE & AWB registers in H3A before this. ++ **/ ++void isph3a_aewb_enable(u8 enable) ++{ ++ __isph3a_aewb_enable(enable); ++ aewbstat.pm_state = enable; ++} ++ ++/** ++ * isph3a_aewb_suspend - Suspend AE, AWB engine in the H3A module. ++ **/ ++void isph3a_aewb_suspend(void) ++{ ++ if (aewbstat.pm_state) ++ __isph3a_aewb_enable(0); ++} ++ ++/** ++ * isph3a_aewb_resume - Resume AE, AWB engine in the H3A module. ++ **/ ++void isph3a_aewb_resume(void) ++{ ++ if (aewbstat.pm_state) ++ __isph3a_aewb_enable(1); ++} ++ ++int isph3a_aewb_busy(void) ++{ ++ return isp_reg_readl(OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR) ++ & ISPH3A_PCR_BUSYAEAWB; ++} ++ ++/** ++ * isph3a_update_wb - Updates WB parameters. ++ * ++ * Needs to be called when no ISP Preview processing is taking place. ++ **/ ++void isph3a_update_wb(void) ++{ ++ if (wb_update) { ++ isppreview_config_whitebalance(h3awb_update); ++ wb_update = 0; ++ } ++ return; ++} ++EXPORT_SYMBOL(isph3a_update_wb); ++ ++/** ++ * isph3a_aewb_update_regs - Helper function to update h3a registers. ++ **/ ++static void isph3a_aewb_update_regs(void) ++{ ++ isp_reg_writel(aewb_regs.reg_pcr, OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR); ++ isp_reg_writel(aewb_regs.reg_win1, OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWWIN1); ++ isp_reg_writel(aewb_regs.reg_start, OMAP3_ISP_IOMEM_H3A, ++ ISPH3A_AEWINSTART); ++ isp_reg_writel(aewb_regs.reg_blk, OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWINBLK); ++ isp_reg_writel(aewb_regs.reg_subwin, OMAP3_ISP_IOMEM_H3A, ++ ISPH3A_AEWSUBWIN); ++ ++ aewbstat.update = 0; ++ aewbstat.frame_count = 1; ++} ++ ++/** ++ * isph3a_aewb_update_req_buffer - Helper function to update buffer cache pages ++ * @buffer: Pointer to structure ++ **/ ++static void isph3a_aewb_update_req_buffer(struct isph3a_aewb_buffer *buffer) ++{ ++ int size = aewbstat.stats_buf_size; ++ ++ size = PAGE_ALIGN(size); ++ dmac_inv_range((void *)buffer->addr_align, ++ (void *)buffer->addr_align + size); ++} ++ ++/** ++ * isph3a_aewb_stats_available - Check for stats available of specified frame. ++ * @aewbdata: Pointer to return AE AWB statistics data ++ * ++ * Returns 0 if successful, or -1 if statistics are unavailable. ++ **/ ++static int isph3a_aewb_stats_available(struct isph3a_aewb_data *aewbdata) ++{ ++ int i, ret; ++ unsigned long irqflags; ++ ++ spin_lock_irqsave(&aewbstat.buffer_lock, irqflags); ++ for (i = 0; i < H3A_MAX_BUFF; i++) { ++ DPRINTK_ISPH3A("Checking Stats buff[%d] (%d) for %d\n", ++ i, aewbstat.h3a_buff[i].frame_num, ++ aewbdata->frame_number); ++ if ((aewbdata->frame_number != ++ aewbstat.h3a_buff[i].frame_num) || ++ (aewbstat.h3a_buff[i].frame_num == ++ active_buff->frame_num)) ++ continue; ++ aewbstat.h3a_buff[i].locked = 1; ++ spin_unlock_irqrestore(&aewbstat.buffer_lock, irqflags); ++ isph3a_aewb_update_req_buffer(&aewbstat.h3a_buff[i]); ++ aewbstat.h3a_buff[i].frame_num = 0; ++ ret = copy_to_user((void *)aewbdata->h3a_aewb_statistics_buf, ++ (void *)aewbstat.h3a_buff[i].virt_addr, ++ aewbstat.curr_cfg_buf_size); ++ if (ret) { ++ printk(KERN_ERR "Failed copy_to_user for " ++ "H3A stats buff, %d\n", ret); ++ } ++ aewbdata->ts = aewbstat.h3a_buff[i].ts; ++ aewbdata->config_counter = aewbstat.h3a_buff[i].config_counter; ++ aewbdata->field_count = h3a_xtrastats[i].field_count; ++ return 0; ++ } ++ spin_unlock_irqrestore(&aewbstat.buffer_lock, irqflags); ++ ++ return -1; ++} ++ ++/** ++ * isph3a_aewb_link_buffers - Helper function to link allocated buffers. ++ **/ ++static void isph3a_aewb_link_buffers(void) ++{ ++ int i; ++ ++ for (i = 0; i < H3A_MAX_BUFF; i++) { ++ if ((i + 1) < H3A_MAX_BUFF) { ++ aewbstat.h3a_buff[i].next = &aewbstat.h3a_buff[i + 1]; ++ h3a_xtrastats[i].next = &h3a_xtrastats[i + 1]; ++ } else { ++ aewbstat.h3a_buff[i].next = &aewbstat.h3a_buff[0]; ++ h3a_xtrastats[i].next = &h3a_xtrastats[0]; ++ } ++ } ++} ++ ++/** ++ * isph3a_aewb_unlock_buffers - Helper function to unlock all buffers. ++ **/ ++static void isph3a_aewb_unlock_buffers(void) ++{ ++ int i; ++ unsigned long irqflags; ++ ++ spin_lock_irqsave(&aewbstat.buffer_lock, irqflags); ++ for (i = 0; i < H3A_MAX_BUFF; i++) ++ aewbstat.h3a_buff[i].locked = 0; ++ ++ spin_unlock_irqrestore(&aewbstat.buffer_lock, irqflags); ++} ++ ++/** ++ * isph3a_aewb_isr - Callback from ISP driver for H3A AEWB interrupt. ++ * @status: IRQ0STATUS in case of MMU error, 0 for H3A interrupt. ++ * @arg1: Not used as of now. ++ * @arg2: Not used as of now. ++ */ ++static void isph3a_aewb_isr(unsigned long status, isp_vbq_callback_ptr arg1, ++ void *arg2) ++{ ++ u16 frame_align; ++ ++ if ((H3A_AWB_DONE & status) != H3A_AWB_DONE) ++ return; ++ ++ do_gettimeofday(&active_buff->ts); ++ active_buff->config_counter = atomic_read(&aewbstat.config_counter); ++ active_buff = active_buff->next; ++ if (active_buff->locked == 1) ++ active_buff = active_buff->next; ++ isp_reg_writel(active_buff->ispmmu_addr, OMAP3_ISP_IOMEM_H3A, ++ ISPH3A_AEWBUFST); ++ ++ aewbstat.frame_count++; ++ frame_align = aewbstat.frame_count; ++ if (aewbstat.frame_count > MAX_FRAME_COUNT) { ++ aewbstat.frame_count = 1; ++ frame_align++; ++ } ++ active_buff->frame_num = aewbstat.frame_count; ++ ++ if (aewbstat.stats_req) { ++ DPRINTK_ISPH3A("waiting for frame %d\n", aewbstat.frame_req); ++ if (frame_align >= aewbstat.frame_req + 1) { ++ aewbstat.stats_req = 0; ++ aewbstat.stats_done = 1; ++ wake_up_interruptible(&aewbstat.stats_wait); ++ } ++ } ++ ++ if (aewbstat.update) ++ isph3a_aewb_update_regs(); ++} ++ ++/** ++ * isph3a_aewb_set_params - Helper function to check & store user given params. ++ * @user_cfg: Pointer to AE and AWB parameters struct. ++ * ++ * As most of them are busy-lock registers, need to wait until AEW_BUSY = 0 to ++ * program them during ISR. ++ * ++ * Returns 0 if successful, or -EINVAL if any of the parameters are invalid. ++ **/ ++static int isph3a_aewb_set_params(struct isph3a_aewb_config *user_cfg) ++{ ++ if (unlikely(user_cfg->saturation_limit > MAX_SATURATION_LIM)) { ++ printk(KERN_ERR "Invalid Saturation_limit: %d\n", ++ user_cfg->saturation_limit); ++ return -EINVAL; ++ } ++ if (aewb_config_local.saturation_limit != user_cfg->saturation_limit) { ++ WRITE_SAT_LIM(aewb_regs.reg_pcr, user_cfg->saturation_limit); ++ aewb_config_local.saturation_limit = ++ user_cfg->saturation_limit; ++ aewbstat.update = 1; ++ } ++ ++ if (aewb_config_local.alaw_enable != user_cfg->alaw_enable) { ++ WRITE_ALAW(aewb_regs.reg_pcr, user_cfg->alaw_enable); ++ aewb_config_local.alaw_enable = user_cfg->alaw_enable; ++ aewbstat.update = 1; ++ } ++ ++ if (unlikely(user_cfg->win_height < MIN_WIN_H || ++ user_cfg->win_height > MAX_WIN_H || ++ user_cfg->win_height & 0x01)) { ++ printk(KERN_ERR "Invalid window height: %d\n", ++ user_cfg->win_height); ++ return -EINVAL; ++ } ++ if (aewb_config_local.win_height != user_cfg->win_height) { ++ WRITE_WIN_H(aewb_regs.reg_win1, user_cfg->win_height); ++ aewb_config_local.win_height = user_cfg->win_height; ++ aewbstat.update = 1; ++ } ++ ++ if (unlikely(user_cfg->win_width < MIN_WIN_W || ++ user_cfg->win_width > MAX_WIN_W || ++ user_cfg->win_width & 0x01)) { ++ printk(KERN_ERR "Invalid window width: %d\n", ++ user_cfg->win_width); ++ return -EINVAL; ++ } ++ if (aewb_config_local.win_width != user_cfg->win_width) { ++ WRITE_WIN_W(aewb_regs.reg_win1, user_cfg->win_width); ++ aewb_config_local.win_width = user_cfg->win_width; ++ aewbstat.update = 1; ++ } ++ ++ if (unlikely(user_cfg->ver_win_count < 1 || ++ user_cfg->ver_win_count > MAX_WINVC)) { ++ printk(KERN_ERR "Invalid vertical window count: %d\n", ++ user_cfg->ver_win_count); ++ return -EINVAL; ++ } ++ if (aewb_config_local.ver_win_count != user_cfg->ver_win_count) { ++ WRITE_VER_C(aewb_regs.reg_win1, user_cfg->ver_win_count); ++ aewb_config_local.ver_win_count = user_cfg->ver_win_count; ++ aewbstat.update = 1; ++ } ++ ++ if (unlikely(user_cfg->hor_win_count < 1 || ++ user_cfg->hor_win_count > MAX_WINHC)) { ++ printk(KERN_ERR "Invalid horizontal window count: %d\n", ++ user_cfg->hor_win_count); ++ return -EINVAL; ++ } ++ if (aewb_config_local.hor_win_count != user_cfg->hor_win_count) { ++ WRITE_HOR_C(aewb_regs.reg_win1, user_cfg->hor_win_count); ++ aewb_config_local.hor_win_count = user_cfg->hor_win_count; ++ aewbstat.update = 1; ++ } ++ ++ if (unlikely(user_cfg->ver_win_start > MAX_WINSTART)) { ++ printk(KERN_ERR "Invalid vertical window start: %d\n", ++ user_cfg->ver_win_start); ++ return -EINVAL; ++ } ++ if (aewb_config_local.ver_win_start != user_cfg->ver_win_start) { ++ WRITE_VER_WIN_ST(aewb_regs.reg_start, user_cfg->ver_win_start); ++ aewb_config_local.ver_win_start = user_cfg->ver_win_start; ++ aewbstat.update = 1; ++ } ++ ++ if (unlikely(user_cfg->hor_win_start > MAX_WINSTART)) { ++ printk(KERN_ERR "Invalid horizontal window start: %d\n", ++ user_cfg->hor_win_start); ++ return -EINVAL; ++ } ++ if (aewb_config_local.hor_win_start != user_cfg->hor_win_start) { ++ WRITE_HOR_WIN_ST(aewb_regs.reg_start, user_cfg->hor_win_start); ++ aewb_config_local.hor_win_start = user_cfg->hor_win_start; ++ aewbstat.update = 1; ++ } ++ ++ if (unlikely(user_cfg->blk_ver_win_start > MAX_WINSTART)) { ++ printk(KERN_ERR "Invalid black vertical window start: %d\n", ++ user_cfg->blk_ver_win_start); ++ return -EINVAL; ++ } ++ if (aewb_config_local.blk_ver_win_start != ++ user_cfg->blk_ver_win_start) { ++ WRITE_BLK_VER_WIN_ST(aewb_regs.reg_blk, ++ user_cfg->blk_ver_win_start); ++ aewb_config_local.blk_ver_win_start = ++ user_cfg->blk_ver_win_start; ++ aewbstat.update = 1; ++ } ++ ++ if (unlikely(user_cfg->blk_win_height < MIN_WIN_H || ++ user_cfg->blk_win_height > MAX_WIN_H || ++ user_cfg->blk_win_height & 0x01)) { ++ printk(KERN_ERR "Invalid black window height: %d\n", ++ user_cfg->blk_win_height); ++ return -EINVAL; ++ } ++ if (aewb_config_local.blk_win_height != user_cfg->blk_win_height) { ++ WRITE_BLK_WIN_H(aewb_regs.reg_blk, user_cfg->blk_win_height); ++ aewb_config_local.blk_win_height = user_cfg->blk_win_height; ++ aewbstat.update = 1; ++ } ++ ++ if (unlikely(user_cfg->subsample_ver_inc < MIN_SUB_INC || ++ user_cfg->subsample_ver_inc > MAX_SUB_INC || ++ user_cfg->subsample_ver_inc & 0x01)) { ++ printk(KERN_ERR "Invalid vertical subsample increment: %d\n", ++ user_cfg->subsample_ver_inc); ++ return -EINVAL; ++ } ++ if (aewb_config_local.subsample_ver_inc != ++ user_cfg->subsample_ver_inc) { ++ WRITE_SUB_VER_INC(aewb_regs.reg_subwin, ++ user_cfg->subsample_ver_inc); ++ aewb_config_local.subsample_ver_inc = ++ user_cfg->subsample_ver_inc; ++ aewbstat.update = 1; ++ } ++ ++ if (unlikely(user_cfg->subsample_hor_inc < MIN_SUB_INC || ++ user_cfg->subsample_hor_inc > MAX_SUB_INC || ++ user_cfg->subsample_hor_inc & 0x01)) { ++ printk(KERN_ERR "Invalid horizontal subsample increment: %d\n", ++ user_cfg->subsample_hor_inc); ++ return -EINVAL; ++ } ++ if (aewb_config_local.subsample_hor_inc != ++ user_cfg->subsample_hor_inc) { ++ WRITE_SUB_HOR_INC(aewb_regs.reg_subwin, ++ user_cfg->subsample_hor_inc); ++ aewb_config_local.subsample_hor_inc = ++ user_cfg->subsample_hor_inc; ++ aewbstat.update = 1; ++ } ++ ++ if (!aewbstat.initialized || !aewb_config_local.aewb_enable) { ++ isph3a_aewb_update_regs(); ++ aewbstat.initialized = 1; ++ } ++ return 0; ++} ++ ++/** ++ * isph3a_aewb_configure - Configure AEWB regs, enable/disable H3A engine. ++ * @aewbcfg: Pointer to AEWB config structure. ++ * ++ * Returns 0 if successful, -EINVAL if aewbcfg pointer is NULL, -ENOMEM if ++ * was unable to allocate memory for the buffer, of other errors if H3A ++ * callback is not set or the parameters for AEWB are invalid. ++ **/ ++int isph3a_aewb_configure(struct isph3a_aewb_config *aewbcfg) ++{ ++ int ret = 0; ++ int i; ++ int win_count = 0; ++ ++ if (NULL == aewbcfg) { ++ printk(KERN_ERR "Null argument in configuration. \n"); ++ return -EINVAL; ++ } ++ ++ if (!aewbstat.initialized) { ++ DPRINTK_ISPH3A("Setting callback for H3A\n"); ++ ret = isp_set_callback(CBK_H3A_AWB_DONE, isph3a_aewb_isr, ++ (void *)NULL, (void *)NULL); ++ if (ret) { ++ printk(KERN_ERR "No callback for H3A\n"); ++ return ret; ++ } ++ } ++ ++ ret = isph3a_aewb_set_params(aewbcfg); ++ if (ret) { ++ printk(KERN_ERR "Invalid parameters! \n"); ++ return ret; ++ } ++ ++ win_count = aewbcfg->ver_win_count * aewbcfg->hor_win_count; ++ win_count += aewbcfg->hor_win_count; ++ ret = win_count / 8; ++ win_count += win_count % 8 ? 1 : 0; ++ win_count += ret; ++ ++ aewbstat.win_count = win_count; ++ aewbstat.curr_cfg_buf_size = win_count * AEWB_PACKET_SIZE; ++ ++ if (aewbstat.stats_buf_size ++ && win_count * AEWB_PACKET_SIZE > aewbstat.stats_buf_size) { ++ DPRINTK_ISPH3A("There was a previous buffer... " ++ "Freeing/unmapping current stat busffs\n"); ++ isph3a_aewb_enable(0); ++ for (i = 0; i < H3A_MAX_BUFF; i++) { ++ ispmmu_kunmap(aewbstat.h3a_buff[i].ispmmu_addr); ++ dma_free_coherent( ++ NULL, ++ aewbstat.min_buf_size, ++ (void *)aewbstat.h3a_buff[i].virt_addr, ++ (dma_addr_t)aewbstat.h3a_buff[i].phy_addr); ++ aewbstat.h3a_buff[i].virt_addr = 0; ++ } ++ aewbstat.stats_buf_size = 0; ++ } ++ ++ if (!aewbstat.h3a_buff[0].virt_addr) { ++ aewbstat.stats_buf_size = win_count * AEWB_PACKET_SIZE; ++ aewbstat.min_buf_size = PAGE_ALIGN(aewbstat.stats_buf_size); ++ ++ DPRINTK_ISPH3A("Allocating/mapping new stat buffs\n"); ++ for (i = 0; i < H3A_MAX_BUFF; i++) { ++ aewbstat.h3a_buff[i].virt_addr = ++ (unsigned long)dma_alloc_coherent( ++ NULL, ++ aewbstat.min_buf_size, ++ (dma_addr_t *) ++ &aewbstat.h3a_buff[i].phy_addr, ++ GFP_KERNEL | GFP_DMA); ++ if (aewbstat.h3a_buff[i].virt_addr == 0) { ++ printk(KERN_ERR "Can't acquire memory for " ++ "buffer[%d]\n", i); ++ return -ENOMEM; ++ } ++ aewbstat.h3a_buff[i].addr_align = ++ aewbstat.h3a_buff[i].virt_addr; ++ while ((aewbstat.h3a_buff[i].addr_align & 0xFFFFFFC0) != ++ aewbstat.h3a_buff[i].addr_align) ++ aewbstat.h3a_buff[i].addr_align++; ++ aewbstat.h3a_buff[i].ispmmu_addr = ++ ispmmu_kmap(aewbstat.h3a_buff[i].phy_addr, ++ aewbstat.min_buf_size); ++ } ++ isph3a_aewb_unlock_buffers(); ++ isph3a_aewb_link_buffers(); ++ ++ if (active_buff == NULL) ++ active_buff = &aewbstat.h3a_buff[0]; ++ ++ isp_reg_writel(active_buff->ispmmu_addr, OMAP3_ISP_IOMEM_H3A, ++ ISPH3A_AEWBUFST); ++ } ++ for (i = 0; i < H3A_MAX_BUFF; i++) { ++ DPRINTK_ISPH3A("buff[%d] addr is:\n virt 0x%lX\n" ++ " aligned 0x%lX\n" ++ " phys 0x%lX\n" ++ " ispmmu 0x%08lX\n" ++ " mmapped 0x%lX\n" ++ " frame_num %d\n", i, ++ aewbstat.h3a_buff[i].virt_addr, ++ aewbstat.h3a_buff[i].addr_align, ++ aewbstat.h3a_buff[i].phy_addr, ++ aewbstat.h3a_buff[i].ispmmu_addr, ++ aewbstat.h3a_buff[i].mmap_addr, ++ aewbstat.h3a_buff[i].frame_num); ++ } ++ ++ active_buff->frame_num = 1; ++ ++ atomic_inc(&aewbstat.config_counter); ++ isph3a_aewb_enable(aewbcfg->aewb_enable); ++ isph3a_print_status(); ++ ++ return 0; ++} ++EXPORT_SYMBOL(isph3a_aewb_configure); ++ ++/** ++ * isph3a_aewb_request_statistics - REquest statistics and update gains in AEWB ++ * @aewbdata: Pointer to return AE AWB statistics data. ++ * ++ * This API allows the user to update White Balance gains, as well as ++ * exposure time and analog gain. It is also used to request frame ++ * statistics. ++ * ++ * Returns 0 if successful, -EINVAL when H3A engine is not enabled, or other ++ * errors when setting gains. ++ **/ ++int isph3a_aewb_request_statistics(struct isph3a_aewb_data *aewbdata) ++{ ++ int ret = 0; ++ u16 frame_diff = 0; ++ u16 frame_cnt = aewbstat.frame_count; ++ wait_queue_t wqt; ++ ++ if (!aewb_config_local.aewb_enable) { ++ printk(KERN_ERR "H3A engine not enabled\n"); ++ return -EINVAL; ++ } ++ ++ DPRINTK_ISPH3A("isph3a_aewb_request_statistics: Enter " ++ "(frame req. => %d, current frame => %d," ++ "update => %d)\n", ++ aewbdata->frame_number, frame_cnt, aewbdata->update); ++ DPRINTK_ISPH3A("User data received: \n"); ++ DPRINTK_ISPH3A("Digital gain = 0x%04x\n", aewbdata->dgain); ++ DPRINTK_ISPH3A("WB gain b *= 0x%04x\n", aewbdata->wb_gain_b); ++ DPRINTK_ISPH3A("WB gain r *= 0x%04x\n", aewbdata->wb_gain_r); ++ DPRINTK_ISPH3A("WB gain gb = 0x%04x\n", aewbdata->wb_gain_gb); ++ DPRINTK_ISPH3A("WB gain gr = 0x%04x\n", aewbdata->wb_gain_gr); ++ ++ if (!aewbdata->update) { ++ aewbdata->h3a_aewb_statistics_buf = NULL; ++ goto out; ++ } ++ if (aewbdata->update & SET_DIGITAL_GAIN) ++ h3awb_update.dgain = (u16)aewbdata->dgain; ++ if (aewbdata->update & SET_COLOR_GAINS) { ++ h3awb_update.coef0 = (u8)aewbdata->wb_gain_gr; ++ h3awb_update.coef1 = (u8)aewbdata->wb_gain_r; ++ h3awb_update.coef2 = (u8)aewbdata->wb_gain_b; ++ h3awb_update.coef3 = (u8)aewbdata->wb_gain_gb; ++ } ++ if (aewbdata->update & (SET_COLOR_GAINS | SET_DIGITAL_GAIN)) ++ wb_update = 1; ++ ++ if (!(aewbdata->update & REQUEST_STATISTICS)) { ++ aewbdata->h3a_aewb_statistics_buf = NULL; ++ goto out; ++ } ++ ++ if (aewbdata->frame_number < 1) { ++ printk(KERN_ERR "Illeagal frame number " ++ "requested (%d)\n", ++ aewbdata->frame_number); ++ return -EINVAL; ++ } ++ ++ isph3a_aewb_unlock_buffers(); ++ ++ DPRINTK_ISPH3A("Stats available?\n"); ++ ret = isph3a_aewb_stats_available(aewbdata); ++ if (!ret) ++ goto out; ++ ++ DPRINTK_ISPH3A("Stats in near future?\n"); ++ if (aewbdata->frame_number > frame_cnt) ++ frame_diff = aewbdata->frame_number - frame_cnt; ++ else if (aewbdata->frame_number < frame_cnt) { ++ if ((frame_cnt > (MAX_FRAME_COUNT - MAX_FUTURE_FRAMES)) && ++ (aewbdata->frame_number < MAX_FRAME_COUNT)) { ++ frame_diff = aewbdata->frame_number + MAX_FRAME_COUNT - ++ frame_cnt; ++ } else ++ frame_diff = MAX_FUTURE_FRAMES + 1; ++ } ++ ++ if (frame_diff > MAX_FUTURE_FRAMES) { ++ printk(KERN_ERR "Invalid frame requested, returning current" ++ " frame stats\n"); ++ aewbdata->frame_number = frame_cnt; ++ } ++ if (camnotify) { ++ DPRINTK_ISPH3A("NOT Waiting on stats IRQ for frame %d " ++ "because camnotify set\n", ++ aewbdata->frame_number); ++ aewbdata->h3a_aewb_statistics_buf = NULL; ++ goto out; ++ } ++ DPRINTK_ISPH3A("Waiting on stats IRQ for frame %d\n", ++ aewbdata->frame_number); ++ aewbstat.frame_req = aewbdata->frame_number; ++ aewbstat.stats_req = 1; ++ aewbstat.stats_done = 0; ++ init_waitqueue_entry(&wqt, current); ++ ret = wait_event_interruptible(aewbstat.stats_wait, ++ aewbstat.stats_done == 1); ++ if (ret < 0) { ++ printk(KERN_ERR "isph3a_aewb_request_statistics" ++ " Error on wait event %d\n", ret); ++ aewbdata->h3a_aewb_statistics_buf = NULL; ++ return ret; ++ } ++ ++ DPRINTK_ISPH3A("ISP AEWB request status interrupt raised\n"); ++ ret = isph3a_aewb_stats_available(aewbdata); ++ if (ret) { ++ DPRINTK_ISPH3A("After waiting for stats," ++ " stats not available!!\n"); ++ aewbdata->h3a_aewb_statistics_buf = NULL; ++ } ++out: ++ DPRINTK_ISPH3A("isph3a_aewb_request_statistics: " ++ "aewbdata->h3a_aewb_statistics_buf => %p\n", ++ aewbdata->h3a_aewb_statistics_buf); ++ aewbdata->curr_frame = aewbstat.frame_count; ++ ++ return 0; ++} ++EXPORT_SYMBOL(isph3a_aewb_request_statistics); ++ ++/** ++ * isph3a_aewb_init - Module Initialisation. ++ * ++ * Always returns 0. ++ **/ ++int __init isph3a_aewb_init(void) ++{ ++ memset(&aewbstat, 0, sizeof(aewbstat)); ++ memset(&aewb_regs, 0, sizeof(aewb_regs)); ++ ++ init_waitqueue_head(&aewbstat.stats_wait); ++ spin_lock_init(&aewbstat.buffer_lock); ++ return 0; ++} ++ ++/** ++ * isph3a_aewb_cleanup - Module exit. ++ **/ ++void isph3a_aewb_cleanup(void) ++{ ++ int i; ++ ++ for (i = 0; i < H3A_MAX_BUFF; i++) { ++ if (!aewbstat.h3a_buff[i].phy_addr) ++ continue; ++ ++ ispmmu_kunmap(aewbstat.h3a_buff[i].ispmmu_addr); ++ dma_free_coherent(NULL, ++ aewbstat.min_buf_size, ++ (void *)aewbstat.h3a_buff[i].virt_addr, ++ (dma_addr_t)aewbstat.h3a_buff[i].phy_addr); ++ } ++ memset(&aewbstat, 0, sizeof(aewbstat)); ++ memset(&aewb_regs, 0, sizeof(aewb_regs)); ++} ++ ++/** ++ * isph3a_print_status - Debug print. Values of H3A related registers. ++ **/ ++static void isph3a_print_status(void) ++{ ++ DPRINTK_ISPH3A("ISPH3A_PCR = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_H3A, ISPH3A_PCR)); ++ DPRINTK_ISPH3A("ISPH3A_AEWWIN1 = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWWIN1)); ++ DPRINTK_ISPH3A("ISPH3A_AEWINSTART = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWINSTART)); ++ DPRINTK_ISPH3A("ISPH3A_AEWINBLK = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWINBLK)); ++ DPRINTK_ISPH3A("ISPH3A_AEWSUBWIN = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWSUBWIN)); ++ DPRINTK_ISPH3A("ISPH3A_AEWBUFST = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_H3A, ISPH3A_AEWBUFST)); ++ DPRINTK_ISPH3A("stats windows = %d\n", aewbstat.win_count); ++ DPRINTK_ISPH3A("stats buff size = %d\n", aewbstat.stats_buf_size); ++ DPRINTK_ISPH3A("currently configured stats buff size = %d\n", ++ aewbstat.curr_cfg_buf_size); ++} ++ ++/** ++ * isph3a_notify - Unblocks user request for statistics when camera is off ++ * @notify: 1 - Camera is turned off ++ * ++ * Used when the user has requested statistics about a future frame, but the ++ * camera is turned off before it happens, and this function unblocks the ++ * request so the user can continue in its program. ++ **/ ++void isph3a_notify(int notify) ++{ ++ camnotify = notify; ++ if (camnotify && aewbstat.initialized) { ++ printk(KERN_DEBUG "Warning Camera Off \n"); ++ aewbstat.stats_req = 0; ++ aewbstat.stats_done = 1; ++ wake_up_interruptible(&aewbstat.stats_wait); ++ } ++} ++EXPORT_SYMBOL(isph3a_notify); ++ ++/** ++ * isph3a_save_context - Saves the values of the h3a module registers. ++ **/ ++void isph3a_save_context(void) ++{ ++ DPRINTK_ISPH3A(" Saving context\n"); ++ isp_save_context(isph3a_reg_list); ++ /* Avoid enable during restore ctx */ ++ isph3a_reg_list[0].val &= ~ISPH3A_PCR_AEW_EN; ++} ++EXPORT_SYMBOL(isph3a_save_context); ++ ++/** ++ * isph3a_restore_context - Restores the values of the h3a module registers. ++ **/ ++void isph3a_restore_context(void) ++{ ++ DPRINTK_ISPH3A(" Restoring context\n"); ++ isp_restore_context(isph3a_reg_list); ++} ++EXPORT_SYMBOL(isph3a_restore_context); +diff --git a/drivers/media/video/isp/isph3a.h b/drivers/media/video/isp/isph3a.h +new file mode 100644 +index 0000000..7d4c765 +--- /dev/null ++++ b/drivers/media/video/isp/isph3a.h +@@ -0,0 +1,127 @@ ++/* ++ * isph3a.h ++ * ++ * Include file for H3A module in TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * Contributors: ++ * Sergio Aguirre ++ * Troy Laramy ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#ifndef OMAP_ISP_H3A_H ++#define OMAP_ISP_H3A_H ++ ++#include ++ ++#define AEWB_PACKET_SIZE 16 ++#define H3A_MAX_BUFF 5 ++ ++/* Flags for changed registers */ ++#define PCR_CHNG (1 << 0) ++#define AEWWIN1_CHNG (1 << 1) ++#define AEWINSTART_CHNG (1 << 2) ++#define AEWINBLK_CHNG (1 << 3) ++#define AEWSUBWIN_CHNG (1 << 4) ++#define PRV_WBDGAIN_CHNG (1 << 5) ++#define PRV_WBGAIN_CHNG (1 << 6) ++ ++/* ISPH3A REGISTERS bits */ ++#define ISPH3A_PCR_AF_EN (1 << 0) ++#define ISPH3A_PCR_AF_ALAW_EN (1 << 1) ++#define ISPH3A_PCR_AF_MED_EN (1 << 2) ++#define ISPH3A_PCR_AF_BUSY (1 << 15) ++#define ISPH3A_PCR_AEW_EN (1 << 16) ++#define ISPH3A_PCR_AEW_ALAW_EN (1 << 17) ++#define ISPH3A_PCR_AEW_BUSY (1 << 18) ++ ++#define WRITE_SAT_LIM(reg, sat_limit) \ ++ (reg = (reg & (~(ISPH3A_PCR_AEW_AVE2LMT_MASK))) \ ++ | (sat_limit << ISPH3A_PCR_AEW_AVE2LMT_SHIFT)) ++ ++#define WRITE_ALAW(reg, alaw_en) \ ++ (reg = (reg & (~(ISPH3A_PCR_AEW_ALAW_EN))) \ ++ | ((alaw_en & ISPH3A_PCR_AF_ALAW_EN) \ ++ << ISPH3A_PCR_AEW_ALAW_EN_SHIFT)) ++ ++#define WRITE_WIN_H(reg, height) \ ++ (reg = (reg & (~(ISPH3A_AEWWIN1_WINH_MASK))) \ ++ | (((height >> 1) - 1) << ISPH3A_AEWWIN1_WINH_SHIFT)) ++ ++#define WRITE_WIN_W(reg, width) \ ++ (reg = (reg & (~(ISPH3A_AEWWIN1_WINW_MASK))) \ ++ | (((width >> 1) - 1) << ISPH3A_AEWWIN1_WINW_SHIFT)) ++ ++#define WRITE_VER_C(reg, ver_count) \ ++ (reg = (reg & ~(ISPH3A_AEWWIN1_WINVC_MASK)) \ ++ | ((ver_count - 1) << ISPH3A_AEWWIN1_WINVC_SHIFT)) ++ ++#define WRITE_HOR_C(reg, hor_count) \ ++ (reg = (reg & ~(ISPH3A_AEWWIN1_WINHC_MASK)) \ ++ | ((hor_count - 1) << ISPH3A_AEWWIN1_WINHC_SHIFT)) ++ ++#define WRITE_VER_WIN_ST(reg, ver_win_st) \ ++ (reg = (reg & ~(ISPH3A_AEWINSTART_WINSV_MASK)) \ ++ | (ver_win_st << ISPH3A_AEWINSTART_WINSV_SHIFT)) ++ ++#define WRITE_HOR_WIN_ST(reg, hor_win_st) \ ++ (reg = (reg & ~(ISPH3A_AEWINSTART_WINSH_MASK)) \ ++ | (hor_win_st << ISPH3A_AEWINSTART_WINSH_SHIFT)) ++ ++#define WRITE_BLK_VER_WIN_ST(reg, blk_win_st) \ ++ (reg = (reg & ~(ISPH3A_AEWINBLK_WINSV_MASK)) \ ++ | (blk_win_st << ISPH3A_AEWINBLK_WINSV_SHIFT)) ++ ++#define WRITE_BLK_WIN_H(reg, height) \ ++ (reg = (reg & ~(ISPH3A_AEWINBLK_WINH_MASK)) \ ++ | (((height >> 1) - 1) << ISPH3A_AEWINBLK_WINH_SHIFT)) ++ ++#define WRITE_SUB_VER_INC(reg, sub_ver_inc) \ ++ (reg = (reg & ~(ISPH3A_AEWSUBWIN_AEWINCV_MASK)) \ ++ | (((sub_ver_inc >> 1) - 1) << ISPH3A_AEWSUBWIN_AEWINCV_SHIFT)) ++ ++#define WRITE_SUB_HOR_INC(reg, sub_hor_inc) \ ++ (reg = (reg & ~(ISPH3A_AEWSUBWIN_AEWINCH_MASK)) \ ++ | (((sub_hor_inc >> 1) - 1) << ISPH3A_AEWSUBWIN_AEWINCH_SHIFT)) ++ ++/** ++ * struct isph3a_aewb_xtrastats - Structure with extra statistics sent by cam. ++ * @field_count: Sequence number of returned framestats. ++ * @isph3a_aewb_xtrastats: Pointer to next buffer with extra stats. ++ */ ++struct isph3a_aewb_xtrastats { ++ unsigned long field_count; ++ struct isph3a_aewb_xtrastats *next; ++}; ++ ++void isph3a_aewb_setxtrastats(struct isph3a_aewb_xtrastats *xtrastats); ++ ++int isph3a_aewb_configure(struct isph3a_aewb_config *aewbcfg); ++ ++int isph3a_aewb_request_statistics(struct isph3a_aewb_data *aewbdata); ++ ++void isph3a_save_context(void); ++ ++void isph3a_restore_context(void); ++ ++void isph3a_aewb_enable(u8 enable); ++ ++int isph3a_aewb_busy(void); ++ ++void isph3a_aewb_suspend(void); ++ ++void isph3a_aewb_resume(void); ++ ++void isph3a_update_wb(void); ++ ++void isph3a_notify(int notify); ++#endif /* OMAP_ISP_H3A_H */ +diff --git a/drivers/media/video/isp/isphist.c b/drivers/media/video/isp/isphist.c +new file mode 100644 +index 0000000..c6f6a77 +--- /dev/null ++++ b/drivers/media/video/isp/isphist.c +@@ -0,0 +1,608 @@ ++/* ++ * isphist.c ++ * ++ * HISTOGRAM module for TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * Contributors: ++ * Sergio Aguirre ++ * Troy Laramy ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#include ++ ++#include ++#include ++#include ++ ++#include "isp.h" ++#include "ispreg.h" ++#include "isphist.h" ++#include "ispmmu.h" ++ ++/** ++ * struct isp_hist_status - Histogram status. ++ * @hist_enable: Enables the histogram module. ++ * @initialized: Flag to indicate that the module is correctly initializated. ++ * @frame_cnt: Actual frame count. ++ * @frame_req: Frame requested by user. ++ * @completed: Flag to indicate if a frame request is completed. ++ */ ++struct isp_hist_status { ++ u8 hist_enable; ++ u8 pm_state; ++ u8 initialized; ++ u8 frame_cnt; ++ u8 frame_req; ++ u8 completed; ++} histstat; ++ ++/** ++ * struct isp_hist_buffer - Frame histogram buffer. ++ * @virt_addr: Virtual address to mmap the buffer. ++ * @phy_addr: Physical address of the buffer. ++ * @addr_align: Virtual Address 32 bytes aligned. ++ * @ispmmu_addr: Address of the buffer mapped by the ISPMMU. ++ * @mmap_addr: Mapped memory area of buffer. For userspace access. ++ */ ++struct isp_hist_buffer { ++ unsigned long virt_addr; ++ unsigned long phy_addr; ++ unsigned long addr_align; ++ unsigned long ispmmu_addr; ++ unsigned long mmap_addr; ++} hist_buff; ++ ++/** ++ * struct isp_hist_regs - Current value of Histogram configuration registers. ++ * @reg_pcr: Peripheral control register. ++ * @reg_cnt: Histogram control register. ++ * @reg_wb_gain: Histogram white balance gain register. ++ * @reg_r0_h: Region 0 horizontal register. ++ * @reg_r0_v: Region 0 vertical register. ++ * @reg_r1_h: Region 1 horizontal register. ++ * @reg_r1_v: Region 1 vertical register. ++ * @reg_r2_h: Region 2 horizontal register. ++ * @reg_r2_v: Region 2 vertical register. ++ * @reg_r3_h: Region 3 horizontal register. ++ * @reg_r3_v: Region 3 vertical register. ++ * @reg_hist_addr: Histogram address register. ++ * @reg_hist_data: Histogram data. ++ * @reg_hist_radd: Address register. When input data comes from mem. ++ * @reg_hist_radd_off: Address offset register. When input data comes from mem. ++ * @reg_h_v_info: Image size register. When input data comes from mem. ++ */ ++static struct isp_hist_regs { ++ u32 reg_pcr; ++ u32 reg_cnt; ++ u32 reg_wb_gain; ++ u32 reg_r0_h; ++ u32 reg_r0_v; ++ u32 reg_r1_h; ++ u32 reg_r1_v; ++ u32 reg_r2_h; ++ u32 reg_r2_v; ++ u32 reg_r3_h; ++ u32 reg_r3_v; ++ u32 reg_hist_addr; ++ u32 reg_hist_data; ++ u32 reg_hist_radd; ++ u32 reg_hist_radd_off; ++ u32 reg_h_v_info; ++} hist_regs; ++ ++/* Structure for saving/restoring histogram module registers */ ++struct isp_reg isphist_reg_list[] = { ++ {OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT, 0}, ++ {OMAP3_ISP_IOMEM_HIST, ISPHIST_WB_GAIN, 0}, ++ {OMAP3_ISP_IOMEM_HIST, ISPHIST_R0_HORZ, 0}, ++ {OMAP3_ISP_IOMEM_HIST, ISPHIST_R0_VERT, 0}, ++ {OMAP3_ISP_IOMEM_HIST, ISPHIST_R1_HORZ, 0}, ++ {OMAP3_ISP_IOMEM_HIST, ISPHIST_R1_VERT, 0}, ++ {OMAP3_ISP_IOMEM_HIST, ISPHIST_R2_HORZ, 0}, ++ {OMAP3_ISP_IOMEM_HIST, ISPHIST_R2_VERT, 0}, ++ {OMAP3_ISP_IOMEM_HIST, ISPHIST_R3_HORZ, 0}, ++ {OMAP3_ISP_IOMEM_HIST, ISPHIST_R3_VERT, 0}, ++ {OMAP3_ISP_IOMEM_HIST, ISPHIST_ADDR, 0}, ++ {OMAP3_ISP_IOMEM_HIST, ISPHIST_RADD, 0}, ++ {OMAP3_ISP_IOMEM_HIST, ISPHIST_RADD_OFF, 0}, ++ {OMAP3_ISP_IOMEM_HIST, ISPHIST_H_V_INFO, 0}, ++ {0, ISP_TOK_TERM, 0} ++}; ++ ++static void isp_hist_print_status(void); ++ ++void __isp_hist_enable(u8 enable) ++{ ++ if (enable) ++ DPRINTK_ISPHIST(" histogram enabled \n"); ++ else ++ DPRINTK_ISPHIST(" histogram disabled \n"); ++ ++ isp_reg_and_or(OMAP3_ISP_IOMEM_HIST, ISPHIST_PCR, ~ISPHIST_PCR_EN, ++ (enable ? ISPHIST_PCR_EN : 0)); ++ histstat.hist_enable = enable; ++} ++ ++/** ++ * isp_hist_enable - Enables ISP Histogram submodule operation. ++ * @enable: 1 - Enables the histogram submodule. ++ * ++ * Client should configure all the Histogram registers before calling this ++ * function. ++ **/ ++void isp_hist_enable(u8 enable) ++{ ++ __isp_hist_enable(enable); ++ histstat.pm_state = enable; ++} ++ ++/** ++ * isp_hist_suspend - Suspend ISP Histogram submodule. ++ **/ ++void isp_hist_suspend(void) ++{ ++ if (histstat.pm_state) ++ __isp_hist_enable(0); ++} ++ ++/** ++ * isp_hist_resume - Resume ISP Histogram submodule. ++ **/ ++void isp_hist_resume(void) ++{ ++ if (histstat.pm_state) ++ __isp_hist_enable(1); ++} ++ ++int isp_hist_busy(void) ++{ ++ return isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_PCR) & ++ ISPHIST_PCR_BUSY; ++} ++ ++ ++/** ++ * isp_hist_update_regs - Helper function to update Histogram registers. ++ **/ ++static void isp_hist_update_regs(void) ++{ ++ isp_reg_writel(hist_regs.reg_pcr, OMAP3_ISP_IOMEM_HIST, ISPHIST_PCR); ++ isp_reg_writel(hist_regs.reg_cnt, OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT); ++ isp_reg_writel(hist_regs.reg_wb_gain, OMAP3_ISP_IOMEM_HIST, ++ ISPHIST_WB_GAIN); ++ isp_reg_writel(hist_regs.reg_r0_h, OMAP3_ISP_IOMEM_HIST, ++ ISPHIST_R0_HORZ); ++ isp_reg_writel(hist_regs.reg_r0_v, OMAP3_ISP_IOMEM_HIST, ++ ISPHIST_R0_VERT); ++ isp_reg_writel(hist_regs.reg_r1_h, OMAP3_ISP_IOMEM_HIST, ++ ISPHIST_R1_HORZ); ++ isp_reg_writel(hist_regs.reg_r1_v, OMAP3_ISP_IOMEM_HIST, ++ ISPHIST_R1_VERT); ++ isp_reg_writel(hist_regs.reg_r2_h, OMAP3_ISP_IOMEM_HIST, ++ ISPHIST_R2_HORZ); ++ isp_reg_writel(hist_regs.reg_r2_v, OMAP3_ISP_IOMEM_HIST, ++ ISPHIST_R2_VERT); ++ isp_reg_writel(hist_regs.reg_r3_h, OMAP3_ISP_IOMEM_HIST, ++ ISPHIST_R3_HORZ); ++ isp_reg_writel(hist_regs.reg_r3_v, OMAP3_ISP_IOMEM_HIST, ++ ISPHIST_R3_VERT); ++ isp_reg_writel(hist_regs.reg_hist_addr, OMAP3_ISP_IOMEM_HIST, ++ ISPHIST_ADDR); ++ isp_reg_writel(hist_regs.reg_hist_data, OMAP3_ISP_IOMEM_HIST, ++ ISPHIST_DATA); ++ isp_reg_writel(hist_regs.reg_hist_radd, OMAP3_ISP_IOMEM_HIST, ++ ISPHIST_RADD); ++ isp_reg_writel(hist_regs.reg_hist_radd_off, OMAP3_ISP_IOMEM_HIST, ++ ISPHIST_RADD_OFF); ++ isp_reg_writel(hist_regs.reg_h_v_info, OMAP3_ISP_IOMEM_HIST, ++ ISPHIST_H_V_INFO); ++} ++ ++/** ++ * isp_hist_isr - Callback from ISP driver for HIST interrupt. ++ * @status: IRQ0STATUS in case of MMU error, 0 for hist interrupt. ++ * arg1 and arg2 Not used as of now. ++ **/ ++static void isp_hist_isr(unsigned long status, isp_vbq_callback_ptr arg1, ++ void *arg2) ++{ ++ isp_hist_enable(0); ++ ++ if (!(status & HIST_DONE)) ++ return; ++ ++ if (!histstat.completed) { ++ if (histstat.frame_req == histstat.frame_cnt) { ++ histstat.frame_cnt = 0; ++ histstat.frame_req = 0; ++ histstat.completed = 1; ++ } else { ++ isp_hist_enable(1); ++ histstat.frame_cnt++; ++ } ++ } ++} ++ ++/** ++ * isp_hist_reset_mem - clear Histogram memory before start stats engine. ++ * ++ * Returns 0 after histogram memory was cleared. ++ **/ ++static int isp_hist_reset_mem(void) ++{ ++ int i; ++ ++ isp_reg_or(OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT, ISPHIST_CNT_CLR_EN); ++ ++ for (i = 0; i < HIST_MEM_SIZE; i++) ++ isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA); ++ ++ isp_reg_and(OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT, ~ISPHIST_CNT_CLR_EN); ++ ++ return 0; ++} ++ ++/** ++ * isp_hist_set_params - Helper function to check and store user given params. ++ * @user_cfg: Pointer to user configuration structure. ++ * ++ * Returns 0 on success configuration. ++ **/ ++static int isp_hist_set_params(struct isp_hist_config *user_cfg) ++{ ++ ++ int reg_num = 0; ++ int bit_shift = 0; ++ ++ ++ if (isp_hist_busy()) ++ return -EINVAL; ++ ++ if (user_cfg->input_bit_width > MIN_BIT_WIDTH) ++ WRITE_DATA_SIZE(hist_regs.reg_cnt, 0); ++ else ++ WRITE_DATA_SIZE(hist_regs.reg_cnt, 1); ++ ++ WRITE_SOURCE(hist_regs.reg_cnt, user_cfg->hist_source); ++ ++ if (user_cfg->hist_source) { ++ WRITE_HV_INFO(hist_regs.reg_h_v_info, user_cfg->hist_h_v_info); ++ ++ if ((user_cfg->hist_radd & ISP_32B_BOUNDARY_BUF) == ++ user_cfg->hist_radd) { ++ WRITE_RADD(hist_regs.reg_hist_radd, ++ user_cfg->hist_radd); ++ } else { ++ printk(KERN_ERR "Address should be in 32 byte boundary" ++ "\n"); ++ return -EINVAL; ++ } ++ ++ if ((user_cfg->hist_radd_off & ISP_32B_BOUNDARY_OFFSET) == ++ user_cfg->hist_radd_off) { ++ WRITE_RADD_OFF(hist_regs.reg_hist_radd_off, ++ user_cfg->hist_radd_off); ++ } else { ++ printk(KERN_ERR "Offset should be in 32 byte boundary" ++ "\n"); ++ return -EINVAL; ++ } ++ ++ } ++ ++ isp_hist_reset_mem(); ++ DPRINTK_ISPHIST("ISPHIST: Memory Cleared\n"); ++ histstat.frame_req = user_cfg->hist_frames; ++ ++ if (unlikely(user_cfg->wb_gain_R > MAX_WB_GAIN || ++ user_cfg->wb_gain_RG > MAX_WB_GAIN || ++ user_cfg->wb_gain_B > MAX_WB_GAIN || ++ user_cfg->wb_gain_BG > MAX_WB_GAIN)) { ++ printk(KERN_ERR "Invalid WB gain\n"); ++ return -EINVAL; ++ } else { ++ WRITE_WB_R(hist_regs.reg_wb_gain, user_cfg->wb_gain_R); ++ WRITE_WB_RG(hist_regs.reg_wb_gain, user_cfg->wb_gain_RG); ++ WRITE_WB_B(hist_regs.reg_wb_gain, user_cfg->wb_gain_B); ++ WRITE_WB_BG(hist_regs.reg_wb_gain, user_cfg->wb_gain_BG); ++ } ++ ++ /* Regions size and position */ ++ ++ if (user_cfg->num_regions > MAX_REGIONS) ++ return -EINVAL; ++ ++ if (likely((user_cfg->reg0_hor & ISPHIST_REGHORIZ_HEND_MASK) - ++ ((user_cfg->reg0_hor & ISPHIST_REGHORIZ_HSTART_MASK) >> ++ ISPHIST_REGHORIZ_HSTART_SHIFT))) { ++ WRITE_REG_HORIZ(hist_regs.reg_r0_h, user_cfg->reg0_hor); ++ reg_num++; ++ } else { ++ printk(KERN_ERR "Invalid Region parameters\n"); ++ return -EINVAL; ++ } ++ ++ if (likely((user_cfg->reg0_ver & ISPHIST_REGVERT_VEND_MASK) - ++ ((user_cfg->reg0_ver & ISPHIST_REGVERT_VSTART_MASK) >> ++ ISPHIST_REGVERT_VSTART_SHIFT))) { ++ WRITE_REG_VERT(hist_regs.reg_r0_v, user_cfg->reg0_ver); ++ } else { ++ printk(KERN_ERR "Invalid Region parameters\n"); ++ return -EINVAL; ++ } ++ ++ if (user_cfg->num_regions >= 1) { ++ if (likely((user_cfg->reg1_hor & ISPHIST_REGHORIZ_HEND_MASK) - ++ ((user_cfg->reg1_hor & ++ ISPHIST_REGHORIZ_HSTART_MASK) >> ++ ISPHIST_REGHORIZ_HSTART_SHIFT))) { ++ WRITE_REG_HORIZ(hist_regs.reg_r1_h, user_cfg->reg1_hor); ++ } else { ++ printk(KERN_ERR "Invalid Region parameters\n"); ++ return -EINVAL; ++ } ++ ++ if (likely((user_cfg->reg1_ver & ISPHIST_REGVERT_VEND_MASK) - ++ ((user_cfg->reg1_ver & ++ ISPHIST_REGVERT_VSTART_MASK) >> ++ ISPHIST_REGVERT_VSTART_SHIFT))) { ++ WRITE_REG_VERT(hist_regs.reg_r1_v, user_cfg->reg1_ver); ++ } else { ++ printk(KERN_ERR "Invalid Region parameters\n"); ++ return -EINVAL; ++ } ++ } ++ ++ if (user_cfg->num_regions >= 2) { ++ if (likely((user_cfg->reg2_hor & ISPHIST_REGHORIZ_HEND_MASK) - ++ ((user_cfg->reg2_hor & ++ ISPHIST_REGHORIZ_HSTART_MASK) >> ++ ISPHIST_REGHORIZ_HSTART_SHIFT))) { ++ WRITE_REG_HORIZ(hist_regs.reg_r2_h, user_cfg->reg2_hor); ++ } else { ++ printk(KERN_ERR "Invalid Region parameters\n"); ++ return -EINVAL; ++ } ++ ++ if (likely((user_cfg->reg2_ver & ISPHIST_REGVERT_VEND_MASK) - ++ ((user_cfg->reg2_ver & ++ ISPHIST_REGVERT_VSTART_MASK) >> ++ ISPHIST_REGVERT_VSTART_SHIFT))) { ++ WRITE_REG_VERT(hist_regs.reg_r2_v, user_cfg->reg2_ver); ++ } else { ++ printk(KERN_ERR "Invalid Region parameters\n"); ++ return -EINVAL; ++ } ++ } ++ ++ if (user_cfg->num_regions >= 3) { ++ if (likely((user_cfg->reg3_hor & ISPHIST_REGHORIZ_HEND_MASK) - ++ ((user_cfg->reg3_hor & ++ ISPHIST_REGHORIZ_HSTART_MASK) >> ++ ISPHIST_REGHORIZ_HSTART_SHIFT))) { ++ WRITE_REG_HORIZ(hist_regs.reg_r3_h, user_cfg->reg3_hor); ++ } else { ++ printk(KERN_ERR "Invalid Region parameters\n"); ++ return -EINVAL; ++ } ++ ++ if (likely((user_cfg->reg3_ver & ISPHIST_REGVERT_VEND_MASK) - ++ ((user_cfg->reg3_ver & ++ ISPHIST_REGVERT_VSTART_MASK) >> ++ ISPHIST_REGVERT_VSTART_SHIFT))) { ++ WRITE_REG_VERT(hist_regs.reg_r3_v, user_cfg->reg3_ver); ++ } else { ++ printk(KERN_ERR "Invalid Region parameters\n"); ++ return -EINVAL; ++ } ++ } ++ reg_num = user_cfg->num_regions; ++ if (unlikely(((user_cfg->hist_bins > BINS_256) && ++ (user_cfg->hist_bins != BINS_32)) || ++ ((user_cfg->hist_bins == BINS_256) && ++ reg_num != 0) || ((user_cfg->hist_bins == ++ BINS_128) && reg_num >= 2))) { ++ printk(KERN_ERR "Invalid Bins Number: %d\n", ++ user_cfg->hist_bins); ++ return -EINVAL; ++ } else { ++ WRITE_NUM_BINS(hist_regs.reg_cnt, user_cfg->hist_bins); ++ } ++ ++ if (user_cfg->input_bit_width > MAX_BIT_WIDTH || ++ user_cfg->input_bit_width < MIN_BIT_WIDTH) { ++ printk(KERN_ERR "Invalid Bit Width: %d\n", ++ user_cfg->input_bit_width); ++ return -EINVAL; ++ } else { ++ switch (user_cfg->hist_bins) { ++ case BINS_256: ++ bit_shift = user_cfg->input_bit_width - 8; ++ break; ++ case BINS_128: ++ bit_shift = user_cfg->input_bit_width - 7; ++ break; ++ case BINS_64: ++ bit_shift = user_cfg->input_bit_width - 6; ++ break; ++ case BINS_32: ++ bit_shift = user_cfg->input_bit_width - 5; ++ break; ++ default: ++ return -EINVAL; ++ } ++ WRITE_BIT_SHIFT(hist_regs.reg_cnt, bit_shift); ++ } ++ ++ isp_hist_update_regs(); ++ histstat.initialized = 1; ++ ++ return 0; ++} ++ ++/** ++ * isp_hist_configure - API to configure HIST registers. ++ * @histcfg: Pointer to user configuration structure. ++ * ++ * Returns 0 on success configuration. ++ **/ ++int isp_hist_configure(struct isp_hist_config *histcfg) ++{ ++ ++ int ret = 0; ++ ++ if (NULL == histcfg) { ++ printk(KERN_ERR "Null argument in configuration. \n"); ++ return -EINVAL; ++ } ++ ++ if (!histstat.initialized) { ++ DPRINTK_ISPHIST("Setting callback for HISTOGRAM\n"); ++ ret = isp_set_callback(CBK_HIST_DONE, isp_hist_isr, ++ (void *)NULL, (void *)NULL); ++ if (ret) { ++ printk(KERN_ERR "No callback for HIST\n"); ++ return ret; ++ } ++ } ++ ++ ret = isp_hist_set_params(histcfg); ++ if (ret) { ++ printk(KERN_ERR "Invalid parameters! \n"); ++ return ret; ++ } ++ ++ histstat.frame_cnt = 0; ++ histstat.completed = 0; ++ isp_hist_enable(1); ++ isp_hist_print_status(); ++ ++ return 0; ++} ++EXPORT_SYMBOL(isp_hist_configure); ++ ++/** ++ * isp_hist_request_statistics - Request statistics in Histogram. ++ * @histdata: Pointer to data structure. ++ * ++ * This API allows the user to request for histogram statistics. ++ * ++ * Returns 0 on successful request. ++ **/ ++int isp_hist_request_statistics(struct isp_hist_data *histdata) ++{ ++ int i, ret; ++ u32 curr; ++ ++ if (isp_hist_busy()) ++ return -EBUSY; ++ ++ if (!histstat.completed && histstat.initialized) ++ return -EINVAL; ++ ++ isp_reg_or(OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT, ISPHIST_CNT_CLR_EN); ++ ++ for (i = 0; i < HIST_MEM_SIZE; i++) { ++ curr = isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_DATA); ++ ret = put_user(curr, histdata->hist_statistics_buf + i); ++ if (ret) { ++ printk(KERN_ERR "Failed copy_to_user for " ++ "HIST stats buff, %d\n", ret); ++ } ++ } ++ ++ isp_reg_and(OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT, ++ ~ISPHIST_CNT_CLR_EN); ++ histstat.completed = 0; ++ return 0; ++} ++EXPORT_SYMBOL(isp_hist_request_statistics); ++ ++/** ++ * isp_hist_init - Module Initialization. ++ * ++ * Returns 0 if successful. ++ **/ ++int __init isp_hist_init(void) ++{ ++ memset(&histstat, 0, sizeof(histstat)); ++ memset(&hist_regs, 0, sizeof(hist_regs)); ++ ++ return 0; ++} ++ ++/** ++ * isp_hist_cleanup - Module cleanup. ++ **/ ++void isp_hist_cleanup(void) ++{ ++ memset(&histstat, 0, sizeof(histstat)); ++ memset(&hist_regs, 0, sizeof(hist_regs)); ++} ++ ++/** ++ * isphist_save_context - Saves the values of the histogram module registers. ++ **/ ++void isphist_save_context(void) ++{ ++ DPRINTK_ISPHIST(" Saving context\n"); ++ isp_save_context(isphist_reg_list); ++} ++EXPORT_SYMBOL(isphist_save_context); ++ ++/** ++ * isphist_restore_context - Restores the values of the histogram module regs. ++ **/ ++void isphist_restore_context(void) ++{ ++ DPRINTK_ISPHIST(" Restoring context\n"); ++ isp_restore_context(isphist_reg_list); ++} ++EXPORT_SYMBOL(isphist_restore_context); ++ ++/** ++ * isp_hist_print_status - Debug print ++ **/ ++static void isp_hist_print_status(void) ++{ ++ DPRINTK_ISPHIST("ISPHIST_PCR = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_PCR)); ++ DPRINTK_ISPHIST("ISPHIST_CNT = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_CNT)); ++ DPRINTK_ISPHIST("ISPHIST_WB_GAIN = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_WB_GAIN)); ++ DPRINTK_ISPHIST("ISPHIST_R0_HORZ = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_R0_HORZ)); ++ DPRINTK_ISPHIST("ISPHIST_R0_VERT = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_R0_VERT)); ++ DPRINTK_ISPHIST("ISPHIST_R1_HORZ = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_R1_HORZ)); ++ DPRINTK_ISPHIST("ISPHIST_R1_VERT = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_R1_VERT)); ++ DPRINTK_ISPHIST("ISPHIST_R2_HORZ = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_R2_HORZ)); ++ DPRINTK_ISPHIST("ISPHIST_R2_VERT = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_R2_VERT)); ++ DPRINTK_ISPHIST("ISPHIST_R3_HORZ = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_R3_HORZ)); ++ DPRINTK_ISPHIST("ISPHIST_R3_VERT = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_R3_VERT)); ++ DPRINTK_ISPHIST("ISPHIST_ADDR = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_ADDR)); ++ DPRINTK_ISPHIST("ISPHIST_RADD = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_RADD)); ++ DPRINTK_ISPHIST("ISPHIST_RADD_OFF = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_RADD_OFF)); ++ DPRINTK_ISPHIST("ISPHIST_H_V_INFO = 0x%08x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_HIST, ISPHIST_H_V_INFO)); ++} +diff --git a/drivers/media/video/isp/isphist.h b/drivers/media/video/isp/isphist.h +new file mode 100644 +index 0000000..6b17c4e +--- /dev/null ++++ b/drivers/media/video/isp/isphist.h +@@ -0,0 +1,105 @@ ++/* ++ * isphist.h ++ * ++ * Header file for HISTOGRAM module in TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * Contributors: ++ * Sergio Aguirre ++ * Troy Laramy ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#ifndef OMAP_ISP_HIST_H ++#define OMAP_ISP_HIST_H ++ ++#include ++ ++#define MAX_REGIONS 0x4 ++#define MAX_WB_GAIN 255 ++#define MIN_WB_GAIN 0x0 ++#define MAX_BIT_WIDTH 14 ++#define MIN_BIT_WIDTH 8 ++ ++#define ISPHIST_PCR_EN (1 << 0) ++#define HIST_MEM_SIZE 1024 ++#define ISPHIST_CNT_CLR_EN (1 << 7) ++ ++#define WRITE_SOURCE(reg, source) \ ++ (reg = (reg & ~(ISPHIST_CNT_SOURCE_MASK)) \ ++ | (source << ISPHIST_CNT_SOURCE_SHIFT)) ++ ++#define WRITE_HV_INFO(reg, hv_info) \ ++ (reg = ((reg & ~(ISPHIST_HV_INFO_MASK)) \ ++ | (hv_info & ISPHIST_HV_INFO_MASK))) ++ ++#define WRITE_RADD(reg, radd) \ ++ (reg = (reg & ~(ISPHIST_RADD_MASK)) \ ++ | (radd << ISPHIST_RADD_SHIFT)) ++ ++#define WRITE_RADD_OFF(reg, radd_off) \ ++ (reg = (reg & ~(ISPHIST_RADD_OFF_MASK)) \ ++ | (radd_off << ISPHIST_RADD_OFF_SHIFT)) ++ ++#define WRITE_BIT_SHIFT(reg, bit_shift) \ ++ (reg = (reg & ~(ISPHIST_CNT_SHIFT_MASK)) \ ++ | (bit_shift << ISPHIST_CNT_SHIFT_SHIFT)) ++ ++#define WRITE_DATA_SIZE(reg, data_size) \ ++ (reg = (reg & ~(ISPHIST_CNT_DATASIZE_MASK)) \ ++ | (data_size << ISPHIST_CNT_DATASIZE_SHIFT)) ++ ++#define WRITE_NUM_BINS(reg, num_bins) \ ++ (reg = (reg & ~(ISPHIST_CNT_BINS_MASK)) \ ++ | (num_bins << ISPHIST_CNT_BINS_SHIFT)) ++ ++#define WRITE_WB_R(reg, reg_wb_gain) \ ++ reg = ((reg & ~(ISPHIST_WB_GAIN_WG00_MASK)) \ ++ | (reg_wb_gain << ISPHIST_WB_GAIN_WG00_SHIFT)) ++ ++#define WRITE_WB_RG(reg, reg_wb_gain) \ ++ (reg = (reg & ~(ISPHIST_WB_GAIN_WG01_MASK)) \ ++ | (reg_wb_gain << ISPHIST_WB_GAIN_WG01_SHIFT)) ++ ++#define WRITE_WB_B(reg, reg_wb_gain) \ ++ (reg = (reg & ~(ISPHIST_WB_GAIN_WG02_MASK)) \ ++ | (reg_wb_gain << ISPHIST_WB_GAIN_WG02_SHIFT)) ++ ++#define WRITE_WB_BG(reg, reg_wb_gain) \ ++ (reg = (reg & ~(ISPHIST_WB_GAIN_WG03_MASK)) \ ++ | (reg_wb_gain << ISPHIST_WB_GAIN_WG03_SHIFT)) ++ ++#define WRITE_REG_HORIZ(reg, reg_n_hor) \ ++ (reg = ((reg & ~ISPHIST_REGHORIZ_MASK) \ ++ | (reg_n_hor & ISPHIST_REGHORIZ_MASK))) ++ ++#define WRITE_REG_VERT(reg, reg_n_vert) \ ++ (reg = ((reg & ~ISPHIST_REGVERT_MASK) \ ++ | (reg_n_vert & ISPHIST_REGVERT_MASK))) ++ ++ ++void isp_hist_enable(u8 enable); ++ ++int isp_hist_busy(void); ++ ++int isp_hist_configure(struct isp_hist_config *histcfg); ++ ++int isp_hist_request_statistics(struct isp_hist_data *histdata); ++ ++void isphist_save_context(void); ++ ++void isp_hist_suspend(void); ++ ++void isp_hist_resume(void); ++ ++void isphist_restore_context(void); ++ ++#endif /* OMAP_ISP_HIST */ +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0007-omap3isp-Add-CSI2-interface-support.patch b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0007-omap3isp-Add-CSI2-interface-support.patch new file mode 100644 index 000000000..842f39538 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0007-omap3isp-Add-CSI2-interface-support.patch @@ -0,0 +1,2384 @@ +From 9fbe7b786427d981cac890a7407da09232f5d1e2 Mon Sep 17 00:00:00 2001 +From: Sakari Ailus +Date: Tue, 10 Mar 2009 10:49:02 +0200 +Subject: [PATCH] omap3isp: Add CSI2 interface support + +Signed-off-by: Sakari Ailus +--- + drivers/media/video/isp/ispcsi2.c | 2124 +++++++++++++++++++++++++++++++++++++ + drivers/media/video/isp/ispcsi2.h | 232 ++++ + 2 files changed, 2356 insertions(+), 0 deletions(-) + create mode 100644 drivers/media/video/isp/ispcsi2.c + create mode 100644 drivers/media/video/isp/ispcsi2.h + +diff --git a/drivers/media/video/isp/ispcsi2.c b/drivers/media/video/isp/ispcsi2.c +new file mode 100644 +index 0000000..5141b5a +--- /dev/null ++++ b/drivers/media/video/isp/ispcsi2.c +@@ -0,0 +1,2124 @@ ++/* ++ * ispcsi2.c ++ * ++ * Driver Library for ISP CSI Control module in TI's OMAP3 Camera ISP ++ * ISP CSI interface and IRQ related APIs are defined here. ++ * ++ * Copyright (C) 2009 Texas Instruments. ++ * ++ * Contributors: ++ * Sergio Aguirre ++ * Dominic Curran ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#include ++#include ++ ++#include "isp.h" ++#include "ispreg.h" ++#include "ispcsi2.h" ++ ++static struct isp_csi2_cfg current_csi2_cfg; ++static struct isp_csi2_cfg_update current_csi2_cfg_update; ++ ++static bool update_complexio_cfg1; ++static bool update_phy_cfg0; ++static bool update_phy_cfg1; ++static bool update_ctx_ctrl1[8]; ++static bool update_ctx_ctrl2[8]; ++static bool update_ctx_ctrl3[8]; ++static bool update_timing; ++static bool update_ctrl; ++static bool uses_videoport; ++ ++/** ++ * isp_csi2_complexio_lanes_config - Configuration of CSI2 ComplexIO lanes. ++ * @reqcfg: Pointer to structure containing desired lane configuration ++ * ++ * Validates and saves to internal driver memory the passed configuration. ++ * Returns 0 if successful, or -EINVAL if null pointer is passed, invalid ++ * lane position or polarity is set, and if 2 lanes try to occupy the same ++ * position. To apply this settings, use the isp_csi2_complexio_lanes_update() ++ * function just after calling this function. ++ **/ ++int isp_csi2_complexio_lanes_config(struct isp_csi2_lanes_cfg *reqcfg) ++{ ++ int i; ++ bool pos_occupied[5] = {false, false, false, false, false}; ++ struct isp_csi2_lanes_cfg *currlanes = ¤t_csi2_cfg.lanes; ++ struct isp_csi2_lanes_cfg_update *currlanes_u = ++ ¤t_csi2_cfg_update.lanes; ++ ++ /* Validating parameters sent by driver */ ++ if (reqcfg == NULL) { ++ printk(KERN_ERR "Invalid Complex IO Configuration sent by" ++ " sensor\n"); ++ goto err_einval; ++ } ++ ++ /* Data lanes verification */ ++ for (i = 0; i < 4; i++) { ++ if ((reqcfg->data[i].pol > 1) || (reqcfg->data[i].pos > 5)) { ++ printk(KERN_ERR "Invalid CSI-2 Complex IO configuration" ++ " parameters for data lane #%d\n", i); ++ goto err_einval; ++ } ++ if (pos_occupied[reqcfg->data[i].pos - 1] && ++ reqcfg->data[i].pos > 0) { ++ printk(KERN_ERR "Lane #%d already occupied\n", ++ reqcfg->data[i].pos); ++ goto err_einval; ++ } else ++ pos_occupied[reqcfg->data[i].pos - 1] = true; ++ } ++ ++ /* Clock lane verification */ ++ if ((reqcfg->clk.pol > 1) || (reqcfg->clk.pos > 5) || ++ (reqcfg->clk.pos == 0)) { ++ printk(KERN_ERR "Invalid CSI-2 Complex IO configuration" ++ " parameters for clock lane\n"); ++ goto err_einval; ++ } ++ if (pos_occupied[reqcfg->clk.pos - 1]) { ++ printk(KERN_ERR "Lane #%d already occupied", ++ reqcfg->clk.pos); ++ goto err_einval; ++ } else ++ pos_occupied[reqcfg->clk.pos - 1] = true; ++ ++ for (i = 0; i < 4; i++) { ++ if (currlanes->data[i].pos != reqcfg->data[i].pos) { ++ currlanes->data[i].pos = reqcfg->data[i].pos; ++ currlanes_u->data[i] = true; ++ update_complexio_cfg1 = true; ++ } ++ if (currlanes->data[i].pol != reqcfg->data[i].pol) { ++ currlanes->data[i].pol = reqcfg->data[i].pol; ++ currlanes_u->data[i] = true; ++ update_complexio_cfg1 = true; ++ } ++ } ++ ++ if (currlanes->clk.pos != reqcfg->clk.pos) { ++ currlanes->clk.pos = reqcfg->clk.pos; ++ currlanes_u->clk = true; ++ update_complexio_cfg1 = true; ++ } ++ if (currlanes->clk.pol != reqcfg->clk.pol) { ++ currlanes->clk.pol = reqcfg->clk.pol; ++ currlanes_u->clk = true; ++ update_complexio_cfg1 = true; ++ } ++ return 0; ++err_einval: ++ return -EINVAL; ++} ++ ++/** ++ * isp_csi2_complexio_lanes_update - Applies CSI2 ComplexIO lanes configuration. ++ * @force_update: Flag to force rewrite of registers, even if they haven't been ++ * updated with the isp_csi2_complexio_lanes_config() function. ++ * ++ * It only saves settings when they were previously updated using the ++ * isp_csi2_complexio_lanes_config() function, unless the force_update flag is ++ * set to true. ++ * Always returns 0. ++ **/ ++int isp_csi2_complexio_lanes_update(bool force_update) ++{ ++ struct isp_csi2_lanes_cfg *currlanes = ¤t_csi2_cfg.lanes; ++ struct isp_csi2_lanes_cfg_update *currlanes_u = ++ ¤t_csi2_cfg_update.lanes; ++ u32 reg; ++ int i; ++ ++ if (!update_complexio_cfg1 && !force_update) ++ return 0; ++ ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_COMPLEXIO_CFG1); ++ for (i = 0; i < 4; i++) { ++ if (currlanes_u->data[i] || force_update) { ++ reg &= ~(ISPCSI2_COMPLEXIO_CFG1_DATA_POL_MASK(i + 1) | ++ ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_MASK(i + ++ 1)); ++ reg |= (currlanes->data[i].pol << ++ ISPCSI2_COMPLEXIO_CFG1_DATA_POL_SHIFT(i + 1)); ++ reg |= (currlanes->data[i].pos << ++ ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_SHIFT(i + ++ 1)); ++ currlanes_u->data[i] = false; ++ } ++ } ++ ++ if (currlanes_u->clk || force_update) { ++ reg &= ~(ISPCSI2_COMPLEXIO_CFG1_CLOCK_POL_MASK | ++ ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_MASK); ++ reg |= (currlanes->clk.pol << ++ ISPCSI2_COMPLEXIO_CFG1_CLOCK_POL_SHIFT); ++ reg |= (currlanes->clk.pos << ++ ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_SHIFT); ++ currlanes_u->clk = false; ++ } ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_COMPLEXIO_CFG1); ++ ++ update_complexio_cfg1 = false; ++ return 0; ++} ++ ++/** ++ * isp_csi2_complexio_lanes_get - Gets CSI2 ComplexIO lanes configuration. ++ * ++ * Gets settings from HW registers and fills in the internal driver memory ++ * Always returns 0. ++ **/ ++int isp_csi2_complexio_lanes_get(void) ++{ ++ struct isp_csi2_lanes_cfg *currlanes = ¤t_csi2_cfg.lanes; ++ struct isp_csi2_lanes_cfg_update *currlanes_u = ++ ¤t_csi2_cfg_update.lanes; ++ u32 reg; ++ int i; ++ ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_COMPLEXIO_CFG1); ++ for (i = 0; i < 4; i++) { ++ currlanes->data[i].pol = (reg & ++ ISPCSI2_COMPLEXIO_CFG1_DATA_POL_MASK(i + 1)) >> ++ ISPCSI2_COMPLEXIO_CFG1_DATA_POL_SHIFT(i + 1); ++ currlanes->data[i].pos = (reg & ++ ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_MASK(i + 1)) >> ++ ISPCSI2_COMPLEXIO_CFG1_DATA_POSITION_SHIFT(i + 1); ++ currlanes_u->data[i] = false; ++ } ++ currlanes->clk.pol = (reg & ISPCSI2_COMPLEXIO_CFG1_CLOCK_POL_MASK) >> ++ ISPCSI2_COMPLEXIO_CFG1_CLOCK_POL_SHIFT; ++ currlanes->clk.pos = (reg & ++ ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_MASK) >> ++ ISPCSI2_COMPLEXIO_CFG1_CLOCK_POSITION_SHIFT; ++ currlanes_u->clk = false; ++ ++ update_complexio_cfg1 = false; ++ return 0; ++} ++ ++/** ++ * isp_csi2_complexio_power_status - Gets CSI2 ComplexIO power status. ++ * ++ * Returns 3 possible valid states: ISP_CSI2_POWER_OFF, ISP_CSI2_POWER_ON, ++ * and ISP_CSI2_POWER_ULPW. ++ **/ ++static enum isp_csi2_power_cmds isp_csi2_complexio_power_status(void) ++{ ++ enum isp_csi2_power_cmds ret; ++ u32 reg; ++ ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_COMPLEXIO_CFG1) & ++ ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_MASK; ++ switch (reg) { ++ case ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_OFF: ++ ret = ISP_CSI2_POWER_OFF; ++ break; ++ case ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_ON: ++ ret = ISP_CSI2_POWER_ON; ++ break; ++ case ISPCSI2_COMPLEXIO_CFG1_PWR_STATUS_ULPW: ++ ret = ISP_CSI2_POWER_ULPW; ++ break; ++ default: ++ return -EINVAL; ++ } ++ return ret; ++} ++ ++/** ++ * isp_csi2_complexio_power_autoswitch - Sets CSI2 ComplexIO power autoswitch. ++ * @enable: Sets or clears the autoswitch function enable flag. ++ * ++ * Always returns 0. ++ **/ ++int isp_csi2_complexio_power_autoswitch(bool enable) ++{ ++ u32 reg; ++ ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_COMPLEXIO_CFG1); ++ reg &= ~ISPCSI2_COMPLEXIO_CFG1_PWR_AUTO_MASK; ++ ++ if (enable) ++ reg |= ISPCSI2_COMPLEXIO_CFG1_PWR_AUTO_ENABLE; ++ else ++ reg |= ISPCSI2_COMPLEXIO_CFG1_PWR_AUTO_DISABLE; ++ ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_COMPLEXIO_CFG1); ++ return 0; ++} ++ ++/** ++ * isp_csi2_complexio_power - Sets the desired power command for CSI2 ComplexIO. ++ * @power_cmd: Power command to be set. ++ * ++ * Returns 0 if successful, or -EBUSY if the retry count is exceeded. ++ **/ ++int isp_csi2_complexio_power(enum isp_csi2_power_cmds power_cmd) ++{ ++ enum isp_csi2_power_cmds current_state; ++ u32 reg; ++ u8 retry_count; ++ ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_COMPLEXIO_CFG1) & ++ ~ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_MASK; ++ switch (power_cmd) { ++ case ISP_CSI2_POWER_OFF: ++ reg |= ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_OFF; ++ break; ++ case ISP_CSI2_POWER_ON: ++ reg |= ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_ON; ++ break; ++ case ISP_CSI2_POWER_ULPW: ++ reg |= ISPCSI2_COMPLEXIO_CFG1_PWR_CMD_ULPW; ++ break; ++ default: ++ printk(KERN_ERR "CSI2: ERROR - Wrong Power command!\n"); ++ return -EINVAL; ++ } ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_COMPLEXIO_CFG1); ++ ++ retry_count = 0; ++ do { ++ udelay(50); ++ current_state = isp_csi2_complexio_power_status(); ++ ++ if (current_state != power_cmd) { ++ printk(KERN_DEBUG "CSI2: Complex IO power command not" ++ " yet taken."); ++ if (++retry_count < 100) { ++ printk(KERN_DEBUG " Retrying...\n"); ++ udelay(50); ++ } else { ++ printk(KERN_DEBUG " Retry count exceeded!\n"); ++ } ++ } ++ } while ((current_state != power_cmd) && (retry_count < 100)); ++ ++ if (retry_count == 100) ++ return -EBUSY; ++ ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctrl_config_frame_mode - Configure if_en behaviour for CSI2 ++ * @frame_mode: Desired action for IF_EN switch off. 0 - disable IF immediately ++ * 1 - disable after all Frame end Code is received in all ++ * contexts. ++ * ++ * Validates and saves to internal driver memory the passed configuration. ++ * Always returns 0. ++ **/ ++int isp_csi2_ctrl_config_frame_mode(enum isp_csi2_frame_mode frame_mode) ++{ ++ struct isp_csi2_ctrl_cfg *currctrl = ¤t_csi2_cfg.ctrl; ++ struct isp_csi2_ctrl_cfg_update *currctrl_u = ++ ¤t_csi2_cfg_update.ctrl; ++ ++ if (currctrl->frame_mode != frame_mode) { ++ currctrl->frame_mode = frame_mode; ++ currctrl_u->frame_mode = true; ++ update_ctrl = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctrl_config_vp_clk_enable - Enables/disables CSI2 Videoport clock. ++ * @vp_clk_enable: Boolean value to specify the Videoport clock state. ++ * ++ * Validates and saves to internal driver memory the passed configuration. ++ * Always returns 0. ++ **/ ++int isp_csi2_ctrl_config_vp_clk_enable(bool vp_clk_enable) ++{ ++ struct isp_csi2_ctrl_cfg *currctrl = ¤t_csi2_cfg.ctrl; ++ struct isp_csi2_ctrl_cfg_update *currctrl_u = ++ ¤t_csi2_cfg_update.ctrl; ++ ++ if (currctrl->vp_clk_enable != vp_clk_enable) { ++ currctrl->vp_clk_enable = vp_clk_enable; ++ currctrl_u->vp_clk_enable = true; ++ update_ctrl = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctrl_config_vp_only_enable - Sets CSI2 Videoport clock as exclusive ++ * @vp_only_enable: Boolean value to specify if the Videoport clock is ++ * exclusive, setting the OCP port as disabled. ++ * ++ * Validates and saves to internal driver memory the passed configuration. ++ * Always returns 0. ++ **/ ++int isp_csi2_ctrl_config_vp_only_enable(bool vp_only_enable) ++{ ++ struct isp_csi2_ctrl_cfg *currctrl = ¤t_csi2_cfg.ctrl; ++ struct isp_csi2_ctrl_cfg_update *currctrl_u = ++ ¤t_csi2_cfg_update.ctrl; ++ ++ if (currctrl->vp_only_enable != vp_only_enable) { ++ currctrl->vp_only_enable = vp_only_enable; ++ currctrl_u->vp_only_enable = true; ++ update_ctrl = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctrl_config_vp_out_ctrl - Sets CSI2 Videoport clock divider ++ * @vp_out_ctrl: Divider value for setting videoport clock frequency based on ++ * OCP port frequency, valid dividers are between 1 and 4. ++ * ++ * Validates and saves to internal driver memory the passed configuration. ++ * Returns 0 if successful, or -EINVAL if wrong divider value is passed. ++ **/ ++int isp_csi2_ctrl_config_vp_out_ctrl(u8 vp_out_ctrl) ++{ ++ struct isp_csi2_ctrl_cfg *currctrl = ¤t_csi2_cfg.ctrl; ++ struct isp_csi2_ctrl_cfg_update *currctrl_u = ++ ¤t_csi2_cfg_update.ctrl; ++ ++ if ((vp_out_ctrl == 0) || (vp_out_ctrl > 4)) { ++ printk(KERN_ERR "CSI2: Wrong divisor value. Must be between" ++ " 1 and 4"); ++ return -EINVAL; ++ } ++ ++ if (currctrl->vp_out_ctrl != vp_out_ctrl) { ++ currctrl->vp_out_ctrl = vp_out_ctrl; ++ currctrl_u->vp_out_ctrl = true; ++ update_ctrl = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctrl_config_debug_enable - Sets CSI2 debug ++ * @debug_enable: Boolean for setting debug configuration on CSI2. ++ * ++ * Always returns 0. ++ **/ ++int isp_csi2_ctrl_config_debug_enable(bool debug_enable) ++{ ++ struct isp_csi2_ctrl_cfg *currctrl = ¤t_csi2_cfg.ctrl; ++ struct isp_csi2_ctrl_cfg_update *currctrl_u = ++ ¤t_csi2_cfg_update.ctrl; ++ ++ if (currctrl->debug_enable != debug_enable) { ++ currctrl->debug_enable = debug_enable; ++ currctrl_u->debug_enable = true; ++ update_ctrl = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctrl_config_burst_size - Sets CSI2 burst size. ++ * @burst_size: Burst size of the memory saving capability of receiver. ++ * ++ * Returns 0 if successful, or -EINVAL if burst size is wrong. ++ **/ ++int isp_csi2_ctrl_config_burst_size(u8 burst_size) ++{ ++ struct isp_csi2_ctrl_cfg *currctrl = ¤t_csi2_cfg.ctrl; ++ struct isp_csi2_ctrl_cfg_update *currctrl_u = ++ ¤t_csi2_cfg_update.ctrl; ++ if (burst_size > 3) { ++ printk(KERN_ERR "CSI2: Wrong burst size. Must be between" ++ " 0 and 3"); ++ return -EINVAL; ++ } ++ ++ if (currctrl->burst_size != burst_size) { ++ currctrl->burst_size = burst_size; ++ currctrl_u->burst_size = true; ++ update_ctrl = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctrl_config_ecc_enable - Enables ECC on CSI2 Receiver ++ * @ecc_enable: Boolean to enable/disable the CSI2 receiver ECC handling. ++ * ++ * Always returns 0. ++ **/ ++int isp_csi2_ctrl_config_ecc_enable(bool ecc_enable) ++{ ++ struct isp_csi2_ctrl_cfg *currctrl = ¤t_csi2_cfg.ctrl; ++ struct isp_csi2_ctrl_cfg_update *currctrl_u = ++ ¤t_csi2_cfg_update.ctrl; ++ ++ if (currctrl->ecc_enable != ecc_enable) { ++ currctrl->ecc_enable = ecc_enable; ++ currctrl_u->ecc_enable = true; ++ update_ctrl = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctrl_config_ecc_enable - Enables ECC on CSI2 Receiver ++ * @ecc_enable: Boolean to enable/disable the CSI2 receiver ECC handling. ++ * ++ * Always returns 0. ++ **/ ++int isp_csi2_ctrl_config_secure_mode(bool secure_mode) ++{ ++ struct isp_csi2_ctrl_cfg *currctrl = ¤t_csi2_cfg.ctrl; ++ struct isp_csi2_ctrl_cfg_update *currctrl_u = ++ ¤t_csi2_cfg_update.ctrl; ++ ++ if (currctrl->secure_mode != secure_mode) { ++ currctrl->secure_mode = secure_mode; ++ currctrl_u->secure_mode = true; ++ update_ctrl = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctrl_config_if_enable - Enables CSI2 Receiver interface. ++ * @if_enable: Boolean to enable/disable the CSI2 receiver interface. ++ * ++ * Always returns 0. ++ **/ ++int isp_csi2_ctrl_config_if_enable(bool if_enable) ++{ ++ struct isp_csi2_ctrl_cfg *currctrl = ¤t_csi2_cfg.ctrl; ++ struct isp_csi2_ctrl_cfg_update *currctrl_u = ++ ¤t_csi2_cfg_update.ctrl; ++ ++ if (currctrl->if_enable != if_enable) { ++ currctrl->if_enable = if_enable; ++ currctrl_u->if_enable = true; ++ update_ctrl = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctrl_update - Applies CSI2 control configuration. ++ * @force_update: Flag to force rewrite of registers, even if they haven't been ++ * updated with the isp_csi2_ctrl_config_*() functions. ++ * ++ * It only saves settings when they were previously updated using the ++ * isp_csi2_ctrl_config_*() functions, unless the force_update flag is ++ * set to true. ++ * Always returns 0. ++ **/ ++int isp_csi2_ctrl_update(bool force_update) ++{ ++ struct isp_csi2_ctrl_cfg *currctrl = ¤t_csi2_cfg.ctrl; ++ struct isp_csi2_ctrl_cfg_update *currctrl_u = ++ ¤t_csi2_cfg_update.ctrl; ++ u32 reg; ++ ++ if (update_ctrl || force_update) { ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_CTRL); ++ if (currctrl_u->frame_mode || force_update) { ++ reg &= ~ISPCSI2_CTRL_FRAME_MASK; ++ if (currctrl->frame_mode) ++ reg |= ISPCSI2_CTRL_FRAME_DISABLE_FEC; ++ else ++ reg |= ISPCSI2_CTRL_FRAME_DISABLE_IMM; ++ currctrl_u->frame_mode = false; ++ } ++ if (currctrl_u->vp_clk_enable || force_update) { ++ reg &= ~ISPCSI2_CTRL_VP_CLK_EN_MASK; ++ if (currctrl->vp_clk_enable) ++ reg |= ISPCSI2_CTRL_VP_CLK_EN_ENABLE; ++ else ++ reg |= ISPCSI2_CTRL_VP_CLK_EN_DISABLE; ++ currctrl_u->vp_clk_enable = false; ++ } ++ if (currctrl_u->vp_only_enable || force_update) { ++ reg &= ~ISPCSI2_CTRL_VP_ONLY_EN_MASK; ++ uses_videoport = currctrl->vp_only_enable; ++ if (currctrl->vp_only_enable) ++ reg |= ISPCSI2_CTRL_VP_ONLY_EN_ENABLE; ++ else ++ reg |= ISPCSI2_CTRL_VP_ONLY_EN_DISABLE; ++ currctrl_u->vp_only_enable = false; ++ } ++ if (currctrl_u->vp_out_ctrl || force_update) { ++ reg &= ~ISPCSI2_CTRL_VP_OUT_CTRL_MASK; ++ reg |= (currctrl->vp_out_ctrl - 1) << ++ ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT; ++ currctrl_u->vp_out_ctrl = false; ++ } ++ if (currctrl_u->debug_enable || force_update) { ++ reg &= ~ISPCSI2_CTRL_DBG_EN_MASK; ++ if (currctrl->debug_enable) ++ reg |= ISPCSI2_CTRL_DBG_EN_ENABLE; ++ else ++ reg |= ISPCSI2_CTRL_DBG_EN_DISABLE; ++ currctrl_u->debug_enable = false; ++ } ++ if (currctrl_u->burst_size || force_update) { ++ reg &= ~ISPCSI2_CTRL_BURST_SIZE_MASK; ++ reg |= currctrl->burst_size << ++ ISPCSI2_CTRL_BURST_SIZE_SHIFT; ++ currctrl_u->burst_size = false; ++ } ++ if (currctrl_u->ecc_enable || force_update) { ++ reg &= ~ISPCSI2_CTRL_ECC_EN_MASK; ++ if (currctrl->ecc_enable) ++ reg |= ISPCSI2_CTRL_ECC_EN_ENABLE; ++ else ++ reg |= ISPCSI2_CTRL_ECC_EN_DISABLE; ++ currctrl_u->ecc_enable = false; ++ } ++ if (currctrl_u->secure_mode || force_update) { ++ reg &= ~ISPCSI2_CTRL_SECURE_MASK; ++ if (currctrl->secure_mode) ++ reg |= ISPCSI2_CTRL_SECURE_ENABLE; ++ else ++ reg |= ISPCSI2_CTRL_SECURE_DISABLE; ++ currctrl_u->secure_mode = false; ++ } ++ if (currctrl_u->if_enable || force_update) { ++ reg &= ~ISPCSI2_CTRL_IF_EN_MASK; ++ if (currctrl->if_enable) ++ reg |= ISPCSI2_CTRL_IF_EN_ENABLE; ++ else ++ reg |= ISPCSI2_CTRL_IF_EN_DISABLE; ++ currctrl_u->if_enable = false; ++ } ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_CTRL); ++ update_ctrl = false; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctrl_get - Gets CSI2 control configuration ++ * ++ * Always returns 0. ++ **/ ++int isp_csi2_ctrl_get(void) ++{ ++ struct isp_csi2_ctrl_cfg *currctrl = ¤t_csi2_cfg.ctrl; ++ struct isp_csi2_ctrl_cfg_update *currctrl_u = ++ ¤t_csi2_cfg_update.ctrl; ++ u32 reg; ++ ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_CTRL); ++ currctrl->frame_mode = (reg & ISPCSI2_CTRL_FRAME_MASK) >> ++ ISPCSI2_CTRL_FRAME_SHIFT; ++ currctrl_u->frame_mode = false; ++ ++ if ((reg & ISPCSI2_CTRL_VP_CLK_EN_MASK) == ++ ISPCSI2_CTRL_VP_CLK_EN_ENABLE) ++ currctrl->vp_clk_enable = true; ++ else ++ currctrl->vp_clk_enable = false; ++ currctrl_u->vp_clk_enable = false; ++ ++ if ((reg & ISPCSI2_CTRL_VP_ONLY_EN_MASK) == ++ ISPCSI2_CTRL_VP_ONLY_EN_ENABLE) ++ currctrl->vp_only_enable = true; ++ else ++ currctrl->vp_only_enable = false; ++ uses_videoport = currctrl->vp_only_enable; ++ currctrl_u->vp_only_enable = false; ++ ++ currctrl->vp_out_ctrl = ((reg & ISPCSI2_CTRL_VP_OUT_CTRL_MASK) >> ++ ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT) + 1; ++ currctrl_u->vp_out_ctrl = false; ++ ++ if ((reg & ISPCSI2_CTRL_DBG_EN_MASK) == ISPCSI2_CTRL_DBG_EN_ENABLE) ++ currctrl->debug_enable = true; ++ else ++ currctrl->debug_enable = false; ++ currctrl_u->debug_enable = false; ++ ++ currctrl->burst_size = (reg & ISPCSI2_CTRL_BURST_SIZE_MASK) >> ++ ISPCSI2_CTRL_BURST_SIZE_SHIFT; ++ currctrl_u->burst_size = false; ++ ++ if ((reg & ISPCSI2_CTRL_ECC_EN_MASK) == ISPCSI2_CTRL_ECC_EN_ENABLE) ++ currctrl->ecc_enable = true; ++ else ++ currctrl->ecc_enable = false; ++ currctrl_u->ecc_enable = false; ++ ++ if ((reg & ISPCSI2_CTRL_SECURE_MASK) == ISPCSI2_CTRL_SECURE_ENABLE) ++ currctrl->secure_mode = true; ++ else ++ currctrl->secure_mode = false; ++ currctrl_u->secure_mode = false; ++ ++ if ((reg & ISPCSI2_CTRL_IF_EN_MASK) == ISPCSI2_CTRL_IF_EN_ENABLE) ++ currctrl->if_enable = true; ++ else ++ currctrl->if_enable = false; ++ currctrl_u->if_enable = false; ++ ++ update_ctrl = false; ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctx_validate - Validates the context number value ++ * @ctxnum: Pointer to variable containing context number. ++ * ++ * If the value is not in range (3 bits), it is being ANDed with 0x7 to force ++ * it to be on range. ++ **/ ++static void isp_csi2_ctx_validate(u8 *ctxnum) ++{ ++ if (*ctxnum > 7) { ++ printk(KERN_ERR "Invalid context number. Forcing valid" ++ " value...\n"); ++ *ctxnum &= ~(0x7); ++ } ++} ++ ++/** ++ * isp_csi2_ctx_config_virtual_id - Maps a virtual ID with a CSI2 Rx context ++ * @ctxnum: Context number, valid between 0 and 7 values. ++ * @virtual_id: CSI2 Virtual ID to associate with specified context number. ++ * ++ * Returns 0 if successful, or -EINVAL if Virtual ID is not in range (0-3). ++ **/ ++int isp_csi2_ctx_config_virtual_id(u8 ctxnum, u8 virtual_id) ++{ ++ struct isp_csi2_ctx_cfg *selected_ctx; ++ struct isp_csi2_ctx_cfg_update *selected_ctx_u; ++ ++ isp_csi2_ctx_validate(&ctxnum); ++ ++ if (virtual_id > 3) { ++ printk(KERN_ERR "Wrong requested virtual_id\n"); ++ return -EINVAL; ++ } ++ ++ selected_ctx = ¤t_csi2_cfg.contexts[ctxnum]; ++ selected_ctx_u = ¤t_csi2_cfg_update.contexts[ctxnum]; ++ ++ if (selected_ctx->virtual_id != virtual_id) { ++ selected_ctx->virtual_id = virtual_id; ++ selected_ctx_u->virtual_id = true; ++ update_ctx_ctrl2[ctxnum] = true; ++ } ++ ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctx_config_frame_count - Sets frame count to be received in CSI2 Rx. ++ * @ctxnum: Context number, valid between 0 and 7 values. ++ * @frame_count: Number of frames to acquire. ++ * ++ * Always returns 0. ++ **/ ++int isp_csi2_ctx_config_frame_count(u8 ctxnum, u8 frame_count) ++{ ++ struct isp_csi2_ctx_cfg *selected_ctx; ++ struct isp_csi2_ctx_cfg_update *selected_ctx_u; ++ ++ isp_csi2_ctx_validate(&ctxnum); ++ ++ selected_ctx = ¤t_csi2_cfg.contexts[ctxnum]; ++ selected_ctx_u = ¤t_csi2_cfg_update.contexts[ctxnum]; ++ ++ if (selected_ctx->frame_count != frame_count) { ++ selected_ctx->frame_count = frame_count; ++ selected_ctx_u->frame_count = true; ++ update_ctx_ctrl1[ctxnum] = true; ++ } ++ ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctx_config_format - Maps a pixel format to a specified context. ++ * @ctxnum: Context number, valid between 0 and 7 values. ++ * @pixformat: V4L2 structure for pixel format. ++ * ++ * Returns 0 if successful, or -EINVAL if the format is not supported by the ++ * receiver. ++ **/ ++int isp_csi2_ctx_config_format(u8 ctxnum, u32 pixformat) ++{ ++ struct isp_csi2_ctx_cfg *selected_ctx; ++ struct isp_csi2_ctx_cfg_update *selected_ctx_u; ++ struct v4l2_pix_format pix; ++ ++ isp_csi2_ctx_validate(&ctxnum); ++ ++ pix.pixelformat = pixformat; ++ switch (pix.pixelformat) { ++ case V4L2_PIX_FMT_RGB565: ++ case V4L2_PIX_FMT_RGB565X: ++ case V4L2_PIX_FMT_YUYV: ++ case V4L2_PIX_FMT_UYVY: ++ case V4L2_PIX_FMT_RGB555: ++ case V4L2_PIX_FMT_RGB555X: ++ case V4L2_PIX_FMT_SGRBG10: ++ break; ++ default: ++ printk(KERN_ERR "Context config pixel format unsupported\n"); ++ return -EINVAL; ++ } ++ ++ selected_ctx = ¤t_csi2_cfg.contexts[ctxnum]; ++ selected_ctx_u = ¤t_csi2_cfg_update.contexts[ctxnum]; ++ ++ selected_ctx->format = pix; ++ selected_ctx_u->format = true; ++ update_ctx_ctrl2[ctxnum] = true; ++ ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctx_config_alpha - Sets the alpha value for pixel format ++ * @ctxnum: Context number, valid between 0 and 7 values. ++ * @alpha: Alpha value. ++ * ++ * Returns 0 if successful, or -EINVAL if the alpha value is bigger than 16383. ++ **/ ++int isp_csi2_ctx_config_alpha(u8 ctxnum, u16 alpha) ++{ ++ struct isp_csi2_ctx_cfg *selected_ctx; ++ struct isp_csi2_ctx_cfg_update *selected_ctx_u; ++ ++ isp_csi2_ctx_validate(&ctxnum); ++ ++ if (alpha > 0x3FFF) { ++ printk(KERN_ERR "Wrong alpha value\n"); ++ return -EINVAL; ++ } ++ ++ selected_ctx = ¤t_csi2_cfg.contexts[ctxnum]; ++ selected_ctx_u = ¤t_csi2_cfg_update.contexts[ctxnum]; ++ ++ if (selected_ctx->alpha != alpha) { ++ selected_ctx->alpha = alpha; ++ selected_ctx_u->alpha = true; ++ update_ctx_ctrl3[ctxnum] = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctx_config_data_offset - Sets the offset between received lines ++ * @ctxnum: Context number, valid between 0 and 7 values. ++ * @data_offset: Offset between first pixel of each 2 contiguous lines. ++ * ++ * Returns 0 if successful, or -EINVAL if the line offset is bigger than 1023. ++ **/ ++int isp_csi2_ctx_config_data_offset(u8 ctxnum, u16 data_offset) ++{ ++ struct isp_csi2_ctx_cfg *selected_ctx; ++ struct isp_csi2_ctx_cfg_update *selected_ctx_u; ++ ++ isp_csi2_ctx_validate(&ctxnum); ++ ++ if (data_offset > 0x3FF) { ++ printk(KERN_ERR "Wrong line offset\n"); ++ return -EINVAL; ++ } ++ ++ selected_ctx = ¤t_csi2_cfg.contexts[ctxnum]; ++ selected_ctx_u = ¤t_csi2_cfg_update.contexts[ctxnum]; ++ ++ if (selected_ctx->data_offset != data_offset) { ++ selected_ctx->data_offset = data_offset; ++ selected_ctx_u->data_offset = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctx_config_ping_addr - Sets Ping address for CSI2 Rx. buffer saving ++ * @ctxnum: Context number, valid between 0 and 7 values. ++ * @ping_addr: 32 bit ISP MMU mapped address. ++ * ++ * Always returns 0. ++ **/ ++int isp_csi2_ctx_config_ping_addr(u8 ctxnum, u32 ping_addr) ++{ ++ struct isp_csi2_ctx_cfg *selected_ctx; ++ struct isp_csi2_ctx_cfg_update *selected_ctx_u; ++ ++ isp_csi2_ctx_validate(&ctxnum); ++ ++ ping_addr &= ~(0x1F); ++ ++ selected_ctx = ¤t_csi2_cfg.contexts[ctxnum]; ++ selected_ctx_u = ¤t_csi2_cfg_update.contexts[ctxnum]; ++ ++ if (selected_ctx->ping_addr != ping_addr) { ++ selected_ctx->ping_addr = ping_addr; ++ selected_ctx_u->ping_addr = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctx_config_pong_addr - Sets Pong address for CSI2 Rx. buffer saving ++ * @ctxnum: Context number, valid between 0 and 7 values. ++ * @pong_addr: 32 bit ISP MMU mapped address. ++ * ++ * Always returns 0. ++ **/ ++int isp_csi2_ctx_config_pong_addr(u8 ctxnum, u32 pong_addr) ++{ ++ struct isp_csi2_ctx_cfg *selected_ctx; ++ struct isp_csi2_ctx_cfg_update *selected_ctx_u; ++ ++ isp_csi2_ctx_validate(&ctxnum); ++ ++ pong_addr &= ~(0x1F); ++ ++ selected_ctx = ¤t_csi2_cfg.contexts[ctxnum]; ++ selected_ctx_u = ¤t_csi2_cfg_update.contexts[ctxnum]; ++ ++ if (selected_ctx->pong_addr != pong_addr) { ++ selected_ctx->pong_addr = pong_addr; ++ selected_ctx_u->pong_addr = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctx_config_eof_enabled - Enables EOF signal assertion ++ * @ctxnum: Context number, valid between 0 and 7 values. ++ * @eof_enabled: Boolean to enable/disable EOF signal assertion on received ++ * packets. ++ * ++ * Always returns 0. ++ **/ ++int isp_csi2_ctx_config_eof_enabled(u8 ctxnum, bool eof_enabled) ++{ ++ struct isp_csi2_ctx_cfg *selected_ctx; ++ struct isp_csi2_ctx_cfg_update *selected_ctx_u; ++ ++ isp_csi2_ctx_validate(&ctxnum); ++ ++ selected_ctx = ¤t_csi2_cfg.contexts[ctxnum]; ++ selected_ctx_u = ¤t_csi2_cfg_update.contexts[ctxnum]; ++ ++ if (selected_ctx->eof_enabled != eof_enabled) { ++ selected_ctx->eof_enabled = eof_enabled; ++ selected_ctx_u->eof_enabled = true; ++ update_ctx_ctrl1[ctxnum] = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctx_config_eol_enabled - Enables EOL signal assertion ++ * @ctxnum: Context number, valid between 0 and 7 values. ++ * @eol_enabled: Boolean to enable/disable EOL signal assertion on received ++ * packets. ++ * ++ * Always returns 0. ++ **/ ++int isp_csi2_ctx_config_eol_enabled(u8 ctxnum, bool eol_enabled) ++{ ++ struct isp_csi2_ctx_cfg *selected_ctx; ++ struct isp_csi2_ctx_cfg_update *selected_ctx_u; ++ ++ isp_csi2_ctx_validate(&ctxnum); ++ ++ selected_ctx = ¤t_csi2_cfg.contexts[ctxnum]; ++ selected_ctx_u = ¤t_csi2_cfg_update.contexts[ctxnum]; ++ ++ if (selected_ctx->eol_enabled != eol_enabled) { ++ selected_ctx->eol_enabled = eol_enabled; ++ selected_ctx_u->eol_enabled = true; ++ update_ctx_ctrl1[ctxnum] = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctx_config_checksum_enabled - Enables Checksum check in rcvd packets ++ * @ctxnum: Context number, valid between 0 and 7 values. ++ * @checksum_enabled: Boolean to enable/disable Checksum check on received ++ * packets ++ * ++ * Always returns 0. ++ **/ ++int isp_csi2_ctx_config_checksum_enabled(u8 ctxnum, bool checksum_enabled) ++{ ++ struct isp_csi2_ctx_cfg *selected_ctx; ++ struct isp_csi2_ctx_cfg_update *selected_ctx_u; ++ ++ isp_csi2_ctx_validate(&ctxnum); ++ ++ selected_ctx = ¤t_csi2_cfg.contexts[ctxnum]; ++ selected_ctx_u = ¤t_csi2_cfg_update.contexts[ctxnum]; ++ ++ if (selected_ctx->checksum_enabled != checksum_enabled) { ++ selected_ctx->checksum_enabled = checksum_enabled; ++ selected_ctx_u->checksum_enabled = true; ++ update_ctx_ctrl1[ctxnum] = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctx_config_enabled - Enables specified CSI2 context ++ * @ctxnum: Context number, valid between 0 and 7 values. ++ * @enabled: Boolean to enable/disable specified context. ++ * ++ * Always returns 0. ++ **/ ++int isp_csi2_ctx_config_enabled(u8 ctxnum, bool enabled) ++{ ++ struct isp_csi2_ctx_cfg *selected_ctx; ++ struct isp_csi2_ctx_cfg_update *selected_ctx_u; ++ ++ isp_csi2_ctx_validate(&ctxnum); ++ ++ selected_ctx = ¤t_csi2_cfg.contexts[ctxnum]; ++ selected_ctx_u = ¤t_csi2_cfg_update.contexts[ctxnum]; ++ ++ if (selected_ctx->enabled != enabled) { ++ selected_ctx->enabled = enabled; ++ selected_ctx_u->enabled = true; ++ update_ctx_ctrl1[ctxnum] = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctx_update - Applies CSI2 context configuration. ++ * @ctxnum: Context number, valid between 0 and 7 values. ++ * @force_update: Flag to force rewrite of registers, even if they haven't been ++ * updated with the isp_csi2_ctx_config_*() functions. ++ * ++ * It only saves settings when they were previously updated using the ++ * isp_csi2_ctx_config_*() functions, unless the force_update flag is ++ * set to true. ++ * Always returns 0. ++ **/ ++int isp_csi2_ctx_update(u8 ctxnum, bool force_update) ++{ ++ struct isp_csi2_ctx_cfg *selected_ctx; ++ struct isp_csi2_ctx_cfg_update *selected_ctx_u; ++ u32 reg; ++ ++ isp_csi2_ctx_validate(&ctxnum); ++ ++ selected_ctx = ¤t_csi2_cfg.contexts[ctxnum]; ++ selected_ctx_u = ¤t_csi2_cfg_update.contexts[ctxnum]; ++ ++ if (update_ctx_ctrl1[ctxnum] || force_update) { ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_CTRL1(ctxnum)); ++ if (selected_ctx_u->frame_count || force_update) { ++ reg &= ~(ISPCSI2_CTX_CTRL1_COUNT_MASK); ++ reg |= selected_ctx->frame_count << ++ ISPCSI2_CTX_CTRL1_COUNT_SHIFT; ++ selected_ctx_u->frame_count = false; ++ } ++ if (selected_ctx_u->eof_enabled || force_update) { ++ reg &= ~(ISPCSI2_CTX_CTRL1_EOF_EN_MASK); ++ if (selected_ctx->eof_enabled) ++ reg |= ISPCSI2_CTX_CTRL1_EOF_EN_ENABLE; ++ else ++ reg |= ISPCSI2_CTX_CTRL1_EOF_EN_DISABLE; ++ selected_ctx_u->eof_enabled = false; ++ } ++ if (selected_ctx_u->eol_enabled || force_update) { ++ reg &= ~(ISPCSI2_CTX_CTRL1_EOL_EN_MASK); ++ if (selected_ctx->eol_enabled) ++ reg |= ISPCSI2_CTX_CTRL1_EOL_EN_ENABLE; ++ else ++ reg |= ISPCSI2_CTX_CTRL1_EOL_EN_DISABLE; ++ selected_ctx_u->eol_enabled = false; ++ } ++ if (selected_ctx_u->checksum_enabled || force_update) { ++ reg &= ~(ISPCSI2_CTX_CTRL1_CS_EN_MASK); ++ if (selected_ctx->checksum_enabled) ++ reg |= ISPCSI2_CTX_CTRL1_CS_EN_ENABLE; ++ else ++ reg |= ISPCSI2_CTX_CTRL1_CS_EN_DISABLE; ++ selected_ctx_u->checksum_enabled = false; ++ } ++ if (selected_ctx_u->enabled || force_update) { ++ reg &= ~(ISPCSI2_CTX_CTRL1_CTX_EN_MASK); ++ if (selected_ctx->enabled) ++ reg |= ISPCSI2_CTX_CTRL1_CTX_EN_ENABLE; ++ else ++ reg |= ISPCSI2_CTX_CTRL1_CTX_EN_DISABLE; ++ selected_ctx_u->enabled = false; ++ } ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_CTRL1(ctxnum)); ++ update_ctx_ctrl1[ctxnum] = false; ++ } ++ ++ if (update_ctx_ctrl2[ctxnum] || force_update) { ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_CTRL2(ctxnum)); ++ if (selected_ctx_u->virtual_id || force_update) { ++ reg &= ~(ISPCSI2_CTX_CTRL2_VIRTUAL_ID_MASK); ++ reg |= selected_ctx->virtual_id << ++ ISPCSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT; ++ selected_ctx_u->virtual_id = false; ++ } ++ ++ if (selected_ctx_u->format || force_update) { ++ struct v4l2_pix_format *pix; ++ u16 new_format = 0; ++ ++ reg &= ~(ISPCSI2_CTX_CTRL2_FORMAT_MASK); ++ pix = &selected_ctx->format; ++ switch (pix->pixelformat) { ++ case V4L2_PIX_FMT_RGB565: ++ case V4L2_PIX_FMT_RGB565X: ++ new_format = 0x22; ++ break; ++ case V4L2_PIX_FMT_YUYV: ++ case V4L2_PIX_FMT_UYVY: ++ if (uses_videoport) ++ new_format = 0x9E; ++ else ++ new_format = 0x1E; ++ break; ++ case V4L2_PIX_FMT_RGB555: ++ case V4L2_PIX_FMT_RGB555X: ++ new_format = 0xA1; ++ break; ++ case V4L2_PIX_FMT_SGRBG10: ++ if (uses_videoport) ++ new_format = 0x12F; ++ else ++ new_format = 0xAB; ++ break; ++ } ++ reg |= (new_format << ISPCSI2_CTX_CTRL2_FORMAT_SHIFT); ++ selected_ctx_u->format = false; ++ } ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_CTRL2(ctxnum)); ++ update_ctx_ctrl2[ctxnum] = false; ++ } ++ ++ if (update_ctx_ctrl3[ctxnum] || force_update) { ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_CTRL3(ctxnum)); ++ if (selected_ctx_u->alpha || force_update) { ++ reg &= ~(ISPCSI2_CTX_CTRL3_ALPHA_MASK); ++ reg |= (selected_ctx->alpha << ++ ISPCSI2_CTX_CTRL3_ALPHA_SHIFT); ++ selected_ctx_u->alpha = false; ++ } ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_CTRL3(ctxnum)); ++ update_ctx_ctrl3[ctxnum] = false; ++ } ++ ++ if (selected_ctx_u->data_offset) { ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_DAT_OFST(ctxnum)); ++ reg &= ~ISPCSI2_CTX_DAT_OFST_OFST_MASK; ++ reg |= selected_ctx->data_offset << ++ ISPCSI2_CTX_DAT_OFST_OFST_SHIFT; ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_DAT_OFST(ctxnum)); ++ selected_ctx_u->data_offset = false; ++ } ++ ++ if (selected_ctx_u->ping_addr) { ++ reg = selected_ctx->ping_addr; ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_DAT_PING_ADDR(ctxnum)); ++ selected_ctx_u->ping_addr = false; ++ } ++ ++ if (selected_ctx_u->pong_addr) { ++ reg = selected_ctx->pong_addr; ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_DAT_PONG_ADDR(ctxnum)); ++ selected_ctx_u->pong_addr = false; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctx_get - Gets specific CSI2 Context configuration ++ * @ctxnum: Context number, valid between 0 and 7 values. ++ * ++ * Always returns 0. ++ **/ ++int isp_csi2_ctx_get(u8 ctxnum) ++{ ++ struct isp_csi2_ctx_cfg *selected_ctx; ++ struct isp_csi2_ctx_cfg_update *selected_ctx_u; ++ u32 reg; ++ ++ isp_csi2_ctx_validate(&ctxnum); ++ ++ selected_ctx = ¤t_csi2_cfg.contexts[ctxnum]; ++ selected_ctx_u = ¤t_csi2_cfg_update.contexts[ctxnum]; ++ ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_CTX_CTRL1(ctxnum)); ++ selected_ctx->frame_count = (reg & ISPCSI2_CTX_CTRL1_COUNT_MASK) >> ++ ISPCSI2_CTX_CTRL1_COUNT_SHIFT; ++ selected_ctx_u->frame_count = false; ++ ++ if ((reg & ISPCSI2_CTX_CTRL1_EOF_EN_MASK) == ++ ISPCSI2_CTX_CTRL1_EOF_EN_ENABLE) ++ selected_ctx->eof_enabled = true; ++ else ++ selected_ctx->eof_enabled = false; ++ selected_ctx_u->eof_enabled = false; ++ ++ if ((reg & ISPCSI2_CTX_CTRL1_EOL_EN_MASK) == ++ ISPCSI2_CTX_CTRL1_EOL_EN_ENABLE) ++ selected_ctx->eol_enabled = true; ++ else ++ selected_ctx->eol_enabled = false; ++ selected_ctx_u->eol_enabled = false; ++ ++ if ((reg & ISPCSI2_CTX_CTRL1_CS_EN_MASK) == ++ ISPCSI2_CTX_CTRL1_CS_EN_ENABLE) ++ selected_ctx->checksum_enabled = true; ++ else ++ selected_ctx->checksum_enabled = false; ++ selected_ctx_u->checksum_enabled = false; ++ ++ if ((reg & ISPCSI2_CTX_CTRL1_CTX_EN_MASK) == ++ ISPCSI2_CTX_CTRL1_CTX_EN_ENABLE) ++ selected_ctx->enabled = true; ++ else ++ selected_ctx->enabled = false; ++ selected_ctx_u->enabled = false; ++ update_ctx_ctrl1[ctxnum] = false; ++ ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_CTX_CTRL2(ctxnum)); ++ ++ selected_ctx->virtual_id = (reg & ISPCSI2_CTX_CTRL2_VIRTUAL_ID_MASK) >> ++ ISPCSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT; ++ selected_ctx_u->virtual_id = false; ++ ++ switch ((reg & ISPCSI2_CTX_CTRL2_FORMAT_MASK) >> ++ ISPCSI2_CTX_CTRL2_FORMAT_SHIFT) { ++ case 0x22: ++ selected_ctx->format.pixelformat = V4L2_PIX_FMT_RGB565; ++ break; ++ case 0x9E: ++ case 0x1E: ++ selected_ctx->format.pixelformat = V4L2_PIX_FMT_YUYV; ++ break; ++ case 0xA1: ++ selected_ctx->format.pixelformat = V4L2_PIX_FMT_RGB555; ++ break; ++ case 0xAB: ++ case 0x12F: ++ selected_ctx->format.pixelformat = V4L2_PIX_FMT_SGRBG10; ++ break; ++ } ++ selected_ctx_u->format = false; ++ update_ctx_ctrl2[ctxnum] = false; ++ ++ selected_ctx->alpha = (isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_CTRL3(ctxnum)) & ++ ISPCSI2_CTX_CTRL3_ALPHA_MASK) >> ++ ISPCSI2_CTX_CTRL3_ALPHA_SHIFT; ++ selected_ctx_u->alpha = false; ++ update_ctx_ctrl3[ctxnum] = false; ++ ++ selected_ctx->data_offset = (isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_DAT_OFST(ctxnum)) & ++ ISPCSI2_CTX_DAT_OFST_OFST_MASK) >> ++ ISPCSI2_CTX_DAT_OFST_OFST_SHIFT; ++ selected_ctx_u->data_offset = false; ++ ++ selected_ctx->ping_addr = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_DAT_PING_ADDR(ctxnum)); ++ selected_ctx_u->ping_addr = false; ++ ++ selected_ctx->pong_addr = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_DAT_PONG_ADDR(ctxnum)); ++ selected_ctx_u->pong_addr = false; ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctx_update_all - Applies all CSI2 context configuration. ++ * @force_update: Flag to force rewrite of registers, even if they haven't been ++ * updated with the isp_csi2_ctx_config_*() functions. ++ * ++ * It only saves settings when they were previously updated using the ++ * isp_csi2_ctx_config_*() functions, unless the force_update flag is ++ * set to true. ++ * Always returns 0. ++ **/ ++int isp_csi2_ctx_update_all(bool force_update) ++{ ++ u8 ctxnum; ++ ++ for (ctxnum = 0; ctxnum < 8; ctxnum++) ++ isp_csi2_ctx_update(ctxnum, force_update); ++ ++ return 0; ++} ++ ++/** ++ * isp_csi2_ctx_get_all - Gets all CSI2 Context configurations ++ * ++ * Always returns 0. ++ **/ ++int isp_csi2_ctx_get_all(void) ++{ ++ u8 ctxnum; ++ ++ for (ctxnum = 0; ctxnum < 8; ctxnum++) ++ isp_csi2_ctx_get(ctxnum); ++ ++ return 0; ++} ++ ++int isp_csi2_phy_config(struct isp_csi2_phy_cfg *desiredphyconfig) ++{ ++ struct isp_csi2_phy_cfg *currphy = ¤t_csi2_cfg.phy; ++ struct isp_csi2_phy_cfg_update *currphy_u = ++ ¤t_csi2_cfg_update.phy; ++ ++ if ((desiredphyconfig->tclk_term > 0x7f) || ++ (desiredphyconfig->tclk_miss > 0x3)) { ++ printk(KERN_ERR "Invalid PHY configuration sent by the" ++ " driver\n"); ++ return -EINVAL; ++ } ++ ++ if (currphy->ths_term != desiredphyconfig->ths_term) { ++ currphy->ths_term = desiredphyconfig->ths_term; ++ currphy_u->ths_term = true; ++ update_phy_cfg0 = true; ++ } ++ if (currphy->ths_settle != desiredphyconfig->ths_settle) { ++ currphy->ths_settle = desiredphyconfig->ths_settle; ++ currphy_u->ths_settle = true; ++ update_phy_cfg0 = true; ++ } ++ if (currphy->tclk_term != desiredphyconfig->tclk_term) { ++ currphy->tclk_term = desiredphyconfig->tclk_term; ++ currphy_u->tclk_term = true; ++ update_phy_cfg1 = true; ++ } ++ if (currphy->tclk_miss != desiredphyconfig->tclk_miss) { ++ currphy->tclk_miss = desiredphyconfig->tclk_miss; ++ currphy_u->tclk_miss = true; ++ update_phy_cfg1 = true; ++ } ++ if (currphy->tclk_settle != desiredphyconfig->tclk_settle) { ++ currphy->tclk_settle = desiredphyconfig->tclk_settle; ++ currphy_u->tclk_settle = true; ++ update_phy_cfg1 = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_calc_phy_cfg0 - Calculates D-PHY config based on the MIPIClk speed. ++ * @mipiclk: MIPI clock frequency being used with CSI2 sensor. ++ * @lbound_hs_settle: Lower bound for CSI2 High Speed Settle transition. ++ * @ubound_hs_settle: Upper bound for CSI2 High Speed Settle transition. ++ * ++ * From TRM, we have the same calculation for HS Termination signal. ++ * THS_TERM = ceil( 12.5ns / DDRCLK period ) - 1 ++ * But for Settle, we use the mid value between the two passed boundaries from ++ * sensor: ++ * THS_SETTLE = (Upper bound + Lower bound) / 2 ++ * ++ * Always returns 0. ++ */ ++int isp_csi2_calc_phy_cfg0(u32 mipiclk, u32 lbound_hs_settle, ++ u32 ubound_hs_settle) ++{ ++ struct isp_csi2_phy_cfg *currphy = ¤t_csi2_cfg.phy; ++ struct isp_csi2_phy_cfg_update *currphy_u = ++ ¤t_csi2_cfg_update.phy; ++ u32 tmp, ddrclk = mipiclk >> 1; ++ ++ /* Calculate THS_TERM */ ++ tmp = ddrclk / 80000000; ++ if ((ddrclk % 80000000) > 0) ++ tmp++; ++ currphy->ths_term = tmp - 1; ++ currphy_u->ths_term = true; ++ ++ /* Calculate THS_SETTLE */ ++ currphy->ths_settle = (ubound_hs_settle + lbound_hs_settle) / 2; ++ ++ currphy_u->ths_settle = true; ++ isp_csi2_phy_update(true); ++ return 0; ++} ++EXPORT_SYMBOL(isp_csi2_calc_phy_cfg0); ++ ++/** ++ * isp_csi2_phy_update - Applies CSI2 D-PHY configuration. ++ * @force_update: Flag to force rewrite of registers, even if they haven't been ++ * updated with the isp_csi2_phy_config_*() functions. ++ * ++ * It only saves settings when they were previously updated using the ++ * isp_csi2_phy_config_*() functions, unless the force_update flag is ++ * set to true. ++ * Always returns 0. ++ **/ ++int isp_csi2_phy_update(bool force_update) ++{ ++ struct isp_csi2_phy_cfg *currphy = ¤t_csi2_cfg.phy; ++ struct isp_csi2_phy_cfg_update *currphy_u = ++ ¤t_csi2_cfg_update.phy; ++ u32 reg; ++ ++ if (update_phy_cfg0 || force_update) { ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2PHY, ISPCSI2PHY_CFG0); ++ if (currphy_u->ths_term || force_update) { ++ reg &= ~ISPCSI2PHY_CFG0_THS_TERM_MASK; ++ reg |= (currphy->ths_term << ++ ISPCSI2PHY_CFG0_THS_TERM_SHIFT); ++ currphy_u->ths_term = false; ++ } ++ if (currphy_u->ths_settle || force_update) { ++ reg &= ~ISPCSI2PHY_CFG0_THS_SETTLE_MASK; ++ reg |= (currphy->ths_settle << ++ ISPCSI2PHY_CFG0_THS_SETTLE_SHIFT); ++ currphy_u->ths_settle = false; ++ } ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2PHY, ISPCSI2PHY_CFG0); ++ update_phy_cfg0 = false; ++ } ++ ++ if (update_phy_cfg1 || force_update) { ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2PHY, ISPCSI2PHY_CFG1); ++ if (currphy_u->tclk_term || force_update) { ++ reg &= ~ISPCSI2PHY_CFG1_TCLK_TERM_MASK; ++ reg |= (currphy->tclk_term << ++ ISPCSI2PHY_CFG1_TCLK_TERM_SHIFT); ++ currphy_u->tclk_term = false; ++ } ++ if (currphy_u->tclk_miss || force_update) { ++ reg &= ~ISPCSI2PHY_CFG1_TCLK_MISS_MASK; ++ reg |= (currphy->tclk_miss << ++ ISPCSI2PHY_CFG1_TCLK_MISS_SHIFT); ++ currphy_u->tclk_miss = false; ++ } ++ if (currphy_u->tclk_settle || force_update) { ++ reg &= ~ISPCSI2PHY_CFG1_TCLK_SETTLE_MASK; ++ reg |= (currphy->tclk_settle << ++ ISPCSI2PHY_CFG1_TCLK_SETTLE_SHIFT); ++ currphy_u->tclk_settle = false; ++ } ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2PHY, ISPCSI2PHY_CFG1); ++ update_phy_cfg1 = false; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_phy_get - Gets CSI2 D-PHY configuration ++ * ++ * Gets settings from HW registers and fills in the internal driver memory ++ * Always returns 0. ++ **/ ++int isp_csi2_phy_get(void) ++{ ++ struct isp_csi2_phy_cfg *currphy = ¤t_csi2_cfg.phy; ++ struct isp_csi2_phy_cfg_update *currphy_u = ++ ¤t_csi2_cfg_update.phy; ++ u32 reg; ++ ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2PHY, ISPCSI2PHY_CFG0); ++ currphy->ths_term = (reg & ISPCSI2PHY_CFG0_THS_TERM_MASK) >> ++ ISPCSI2PHY_CFG0_THS_TERM_SHIFT; ++ currphy_u->ths_term = false; ++ ++ currphy->ths_settle = (reg & ISPCSI2PHY_CFG0_THS_SETTLE_MASK) >> ++ ISPCSI2PHY_CFG0_THS_SETTLE_SHIFT; ++ currphy_u->ths_settle = false; ++ update_phy_cfg0 = false; ++ ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2PHY, ISPCSI2PHY_CFG1); ++ ++ currphy->tclk_term = (reg & ISPCSI2PHY_CFG1_TCLK_TERM_MASK) >> ++ ISPCSI2PHY_CFG1_TCLK_TERM_SHIFT; ++ currphy_u->tclk_term = false; ++ ++ currphy->tclk_miss = (reg & ISPCSI2PHY_CFG1_TCLK_MISS_MASK) >> ++ ISPCSI2PHY_CFG1_TCLK_MISS_SHIFT; ++ currphy_u->tclk_miss = false; ++ ++ currphy->tclk_settle = (reg & ISPCSI2PHY_CFG1_TCLK_SETTLE_MASK) >> ++ ISPCSI2PHY_CFG1_TCLK_SETTLE_SHIFT; ++ currphy_u->tclk_settle = false; ++ ++ update_phy_cfg1 = false; ++ return 0; ++} ++ ++/** ++ * isp_csi2_timings_config_forcerxmode - Sets Force Rx mode on stop state count ++ * @force_rx_mode: Boolean to enable/disable forcing Rx mode in CSI2 receiver ++ * ++ * Returns 0 if successful, or -EINVAL if wrong ComplexIO number is selected. ++ **/ ++int isp_csi2_timings_config_forcerxmode(u8 io, bool force_rx_mode) ++{ ++ struct isp_csi2_timings_cfg *currtimings; ++ struct isp_csi2_timings_cfg_update *currtimings_u; ++ ++ if (io < 1 || io > 2) { ++ printk(KERN_ERR "CSI2 - Timings config: Invalid IO number\n"); ++ return -EINVAL; ++ } ++ ++ currtimings = ¤t_csi2_cfg.timings[io - 1]; ++ currtimings_u = ¤t_csi2_cfg_update.timings[io - 1]; ++ if (currtimings->force_rx_mode != force_rx_mode) { ++ currtimings->force_rx_mode = force_rx_mode; ++ currtimings_u->force_rx_mode = true; ++ update_timing = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_timings_config_stopstate_16x - Sets 16x factor for L3 cycles ++ * @stop_state_16x: Boolean to use or not use the 16x multiplier for stop count ++ * ++ * Returns 0 if successful, or -EINVAL if wrong ComplexIO number is selected. ++ **/ ++int isp_csi2_timings_config_stopstate_16x(u8 io, bool stop_state_16x) ++{ ++ struct isp_csi2_timings_cfg *currtimings; ++ struct isp_csi2_timings_cfg_update *currtimings_u; ++ ++ if (io < 1 || io > 2) { ++ printk(KERN_ERR "CSI2 - Timings config: Invalid IO number\n"); ++ return -EINVAL; ++ } ++ ++ currtimings = ¤t_csi2_cfg.timings[io - 1]; ++ currtimings_u = ¤t_csi2_cfg_update.timings[io - 1]; ++ if (currtimings->stop_state_16x != stop_state_16x) { ++ currtimings->stop_state_16x = stop_state_16x; ++ currtimings_u->stop_state_16x = true; ++ update_timing = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_timings_config_stopstate_4x - Sets 4x factor for L3 cycles ++ * @stop_state_4x: Boolean to use or not use the 4x multiplier for stop count ++ * ++ * Returns 0 if successful, or -EINVAL if wrong ComplexIO number is selected. ++ **/ ++int isp_csi2_timings_config_stopstate_4x(u8 io, bool stop_state_4x) ++{ ++ struct isp_csi2_timings_cfg *currtimings; ++ struct isp_csi2_timings_cfg_update *currtimings_u; ++ ++ if (io < 1 || io > 2) { ++ printk(KERN_ERR "CSI2 - Timings config: Invalid IO number\n"); ++ return -EINVAL; ++ } ++ ++ currtimings = ¤t_csi2_cfg.timings[io - 1]; ++ currtimings_u = ¤t_csi2_cfg_update.timings[io - 1]; ++ if (currtimings->stop_state_4x != stop_state_4x) { ++ currtimings->stop_state_4x = stop_state_4x; ++ currtimings_u->stop_state_4x = true; ++ update_timing = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_timings_config_stopstate_cnt - Sets L3 cycles ++ * @stop_state_counter: Stop state counter value for L3 cycles ++ * ++ * Returns 0 if successful, or -EINVAL if wrong ComplexIO number is selected. ++ **/ ++int isp_csi2_timings_config_stopstate_cnt(u8 io, u16 stop_state_counter) ++{ ++ struct isp_csi2_timings_cfg *currtimings; ++ struct isp_csi2_timings_cfg_update *currtimings_u; ++ ++ if (io < 1 || io > 2) { ++ printk(KERN_ERR "CSI2 - Timings config: Invalid IO number\n"); ++ return -EINVAL; ++ } ++ ++ currtimings = ¤t_csi2_cfg.timings[io - 1]; ++ currtimings_u = ¤t_csi2_cfg_update.timings[io - 1]; ++ if (currtimings->stop_state_counter != stop_state_counter) { ++ currtimings->stop_state_counter = (stop_state_counter & 0x1FFF); ++ currtimings_u->stop_state_counter = true; ++ update_timing = true; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_timings_update - Applies specified CSI2 timing configuration. ++ * @io: IO number (1 or 2) which specifies which ComplexIO are we updating ++ * @force_update: Flag to force rewrite of registers, even if they haven't been ++ * updated with the isp_csi2_timings_config_*() functions. ++ * ++ * It only saves settings when they were previously updated using the ++ * isp_csi2_timings_config_*() functions, unless the force_update flag is ++ * set to true. ++ * Returns 0 if successful, or -EINVAL if invalid IO number is passed. ++ **/ ++int isp_csi2_timings_update(u8 io, bool force_update) ++{ ++ struct isp_csi2_timings_cfg *currtimings; ++ struct isp_csi2_timings_cfg_update *currtimings_u; ++ u32 reg; ++ ++ if (io < 1 || io > 2) { ++ printk(KERN_ERR "CSI2 - Timings config: Invalid IO number\n"); ++ return -EINVAL; ++ } ++ ++ currtimings = ¤t_csi2_cfg.timings[io - 1]; ++ currtimings_u = ¤t_csi2_cfg_update.timings[io - 1]; ++ ++ if (update_timing || force_update) { ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_TIMING); ++ if (currtimings_u->force_rx_mode || force_update) { ++ reg &= ~ISPCSI2_TIMING_FORCE_RX_MODE_IO_MASK(io); ++ if (currtimings->force_rx_mode) ++ reg |= ISPCSI2_TIMING_FORCE_RX_MODE_IO_ENABLE ++ (io); ++ else ++ reg |= ISPCSI2_TIMING_FORCE_RX_MODE_IO_DISABLE ++ (io); ++ currtimings_u->force_rx_mode = false; ++ } ++ if (currtimings_u->stop_state_16x || force_update) { ++ reg &= ~ISPCSI2_TIMING_STOP_STATE_X16_IO_MASK(io); ++ if (currtimings->stop_state_16x) ++ reg |= ISPCSI2_TIMING_STOP_STATE_X16_IO_ENABLE ++ (io); ++ else ++ reg |= ISPCSI2_TIMING_STOP_STATE_X16_IO_DISABLE ++ (io); ++ currtimings_u->stop_state_16x = false; ++ } ++ if (currtimings_u->stop_state_4x || force_update) { ++ reg &= ~ISPCSI2_TIMING_STOP_STATE_X4_IO_MASK(io); ++ if (currtimings->stop_state_4x) { ++ reg |= ISPCSI2_TIMING_STOP_STATE_X4_IO_ENABLE ++ (io); ++ } else { ++ reg |= ISPCSI2_TIMING_STOP_STATE_X4_IO_DISABLE ++ (io); ++ } ++ currtimings_u->stop_state_4x = false; ++ } ++ if (currtimings_u->stop_state_counter || force_update) { ++ reg &= ~ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_MASK(io); ++ reg |= currtimings->stop_state_counter << ++ ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_SHIFT(io); ++ currtimings_u->stop_state_counter = false; ++ } ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_TIMING); ++ update_timing = false; ++ } ++ return 0; ++} ++ ++/** ++ * isp_csi2_timings_get - Gets specific CSI2 ComplexIO timing configuration ++ * @io: IO number (1 or 2) which specifies which ComplexIO are we getting ++ * ++ * Gets settings from HW registers and fills in the internal driver memory ++ * Returns 0 if successful, or -EINVAL if invalid IO number is passed. ++ **/ ++int isp_csi2_timings_get(u8 io) ++{ ++ struct isp_csi2_timings_cfg *currtimings; ++ struct isp_csi2_timings_cfg_update *currtimings_u; ++ u32 reg; ++ ++ if (io < 1 || io > 2) { ++ printk(KERN_ERR "CSI2 - Timings config: Invalid IO number\n"); ++ return -EINVAL; ++ } ++ ++ currtimings = ¤t_csi2_cfg.timings[io - 1]; ++ currtimings_u = ¤t_csi2_cfg_update.timings[io - 1]; ++ ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_TIMING); ++ if ((reg & ISPCSI2_TIMING_FORCE_RX_MODE_IO_MASK(io)) == ++ ISPCSI2_TIMING_FORCE_RX_MODE_IO_ENABLE(io)) ++ currtimings->force_rx_mode = true; ++ else ++ currtimings->force_rx_mode = false; ++ currtimings_u->force_rx_mode = false; ++ ++ if ((reg & ISPCSI2_TIMING_STOP_STATE_X16_IO_MASK(io)) == ++ ISPCSI2_TIMING_STOP_STATE_X16_IO_ENABLE(io)) ++ currtimings->stop_state_16x = true; ++ else ++ currtimings->stop_state_16x = false; ++ currtimings_u->stop_state_16x = false; ++ ++ if ((reg & ISPCSI2_TIMING_STOP_STATE_X4_IO_MASK(io)) == ++ ISPCSI2_TIMING_STOP_STATE_X4_IO_ENABLE(io)) ++ currtimings->stop_state_4x = true; ++ else ++ currtimings->stop_state_4x = false; ++ currtimings_u->stop_state_4x = false; ++ ++ currtimings->stop_state_counter = (reg & ++ ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_MASK(io)) >> ++ ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_SHIFT(io); ++ currtimings_u->stop_state_counter = false; ++ update_timing = false; ++ return 0; ++} ++ ++/** ++ * isp_csi2_timings_update_all - Applies specified CSI2 timing configuration. ++ * @force_update: Flag to force rewrite of registers, even if they haven't been ++ * updated with the isp_csi2_timings_config_*() functions. ++ * ++ * It only saves settings when they were previously updated using the ++ * isp_csi2_timings_config_*() functions, unless the force_update flag is ++ * set to true. ++ * Always returns 0. ++ **/ ++int isp_csi2_timings_update_all(bool force_update) ++{ ++ int i; ++ ++ for (i = 1; i < 3; i++) ++ isp_csi2_timings_update(i, force_update); ++ return 0; ++} ++ ++/** ++ * isp_csi2_timings_get_all - Gets all CSI2 ComplexIO timing configurations ++ * ++ * Always returns 0. ++ **/ ++int isp_csi2_timings_get_all(void) ++{ ++ int i; ++ ++ for (i = 1; i < 3; i++) ++ isp_csi2_timings_get(i); ++ return 0; ++} ++ ++/** ++ * isp_csi2_isr - CSI2 interrupt handling. ++ **/ ++void isp_csi2_isr(void) ++{ ++ u32 csi2_irqstatus, cpxio1_irqstatus, ctxirqstatus; ++ ++ csi2_irqstatus = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_IRQSTATUS); ++ isp_reg_writel(csi2_irqstatus, OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_IRQSTATUS); ++ ++ if (csi2_irqstatus & ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ) { ++ cpxio1_irqstatus = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_COMPLEXIO1_IRQSTATUS); ++ isp_reg_writel(cpxio1_irqstatus, OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_COMPLEXIO1_IRQSTATUS); ++ printk(KERN_ERR "CSI2: ComplexIO Error IRQ %x\n", ++ cpxio1_irqstatus); ++ } ++ ++ if (csi2_irqstatus & ISPCSI2_IRQSTATUS_CONTEXT(0)) { ++ ctxirqstatus = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_IRQSTATUS(0)); ++ isp_reg_writel(ctxirqstatus, OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_IRQSTATUS(0)); ++ } ++ ++ if (csi2_irqstatus & ISPCSI2_IRQSTATUS_OCP_ERR_IRQ) ++ printk(KERN_ERR "CSI2: OCP Transmission Error\n"); ++ ++ if (csi2_irqstatus & ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ) ++ printk(KERN_ERR "CSI2: Short packet receive error\n"); ++ ++ if (csi2_irqstatus & ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ) ++ printk(KERN_DEBUG "CSI2: ECC correction done\n"); ++ ++ if (csi2_irqstatus & ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ) ++ printk(KERN_ERR "CSI2: ECC correction failed\n"); ++ ++ if (csi2_irqstatus & ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ) ++ printk(KERN_ERR "CSI2: ComplexIO #2 failed\n"); ++ ++ if (csi2_irqstatus & ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ) ++ printk(KERN_ERR "CSI2: FIFO overflow error\n"); ++ ++ return; ++} ++EXPORT_SYMBOL(isp_csi2_isr); ++ ++/** ++ * isp_csi2_irq_complexio1_set - Enables CSI2 ComplexIO IRQs. ++ * @enable: Enable/disable CSI2 ComplexIO #1 interrupts ++ **/ ++void isp_csi2_irq_complexio1_set(int enable) ++{ ++ u32 reg; ++ reg = ISPCSI2_COMPLEXIO1_IRQENABLE_STATEALLULPMEXIT | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_STATEALLULPMENTER | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_STATEULPM5 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRCONTROL5 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRESC5 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTSYNCHS5 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTHS5 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_STATEULPM4 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRCONTROL4 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRESC4 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTSYNCHS4 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTHS4 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_STATEULPM3 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRCONTROL3 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRESC3 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTSYNCHS3 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTHS3 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_STATEULPM2 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRCONTROL2 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRESC2 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTSYNCHS2 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTHS2 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_STATEULPM1 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRCONTROL1 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRESC1 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTSYNCHS1 | ++ ISPCSI2_COMPLEXIO1_IRQENABLE_ERRSOTHS1; ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_COMPLEXIO1_IRQSTATUS); ++ if (enable) { ++ reg |= isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_COMPLEXIO1_IRQENABLE); ++ } else ++ reg = 0; ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_COMPLEXIO1_IRQENABLE); ++} ++EXPORT_SYMBOL(isp_csi2_irq_complexio1_set); ++ ++/** ++ * isp_csi2_irq_ctx_set - Enables CSI2 Context IRQs. ++ * @enable: Enable/disable CSI2 Context interrupts ++ **/ ++void isp_csi2_irq_ctx_set(int enable) ++{ ++ u32 reg; ++ int i; ++ ++ reg = ISPCSI2_CTX_IRQSTATUS_FS_IRQ | ISPCSI2_CTX_IRQSTATUS_FE_IRQ; ++ for (i = 0; i < 8; i++) { ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_IRQSTATUS(i)); ++ if (enable) { ++ isp_reg_or(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_IRQENABLE(i), reg); ++ } else { ++ isp_reg_writel(0, OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_IRQENABLE(i)); ++ } ++ } ++ ++} ++EXPORT_SYMBOL(isp_csi2_irq_ctx_set); ++ ++/** ++ * isp_csi2_irq_status_set - Enables CSI2 Status IRQs. ++ * @enable: Enable/disable CSI2 Status interrupts ++ **/ ++void isp_csi2_irq_status_set(int enable) ++{ ++ u32 reg; ++ reg = ISPCSI2_IRQSTATUS_OCP_ERR_IRQ | ++ ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ | ++ ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ | ++ ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ | ++ ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ | ++ ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ | ++ ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ | ++ ISPCSI2_IRQSTATUS_CONTEXT(0); ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_IRQSTATUS); ++ if (enable) ++ reg |= isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_IRQENABLE); ++ else ++ reg = 0; ++ ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_IRQENABLE); ++} ++EXPORT_SYMBOL(isp_csi2_irq_status_set); ++ ++/** ++ * isp_csi2_irq_status_set - Enables main CSI2 IRQ. ++ * @enable: Enable/disable main CSI2 interrupt ++ **/ ++void isp_csi2_irq_set(int enable) ++{ ++ isp_reg_writel(IRQ0STATUS_CSIA_IRQ, OMAP3_ISP_IOMEM_MAIN, ++ ISP_IRQ0STATUS); ++ isp_reg_and_or(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE, ++ ~IRQ0ENABLE_CSIA_IRQ, ++ (enable ? IRQ0ENABLE_CSIA_IRQ : 0)); ++} ++EXPORT_SYMBOL(isp_csi2_irq_set); ++ ++/** ++ * isp_csi2_irq_all_set - Enable/disable CSI2 interrupts. ++ * @enable: 0-Disable, 1-Enable. ++ **/ ++void isp_csi2_irq_all_set(int enable) ++{ ++ if (enable) { ++ isp_csi2_irq_complexio1_set(enable); ++ isp_csi2_irq_ctx_set(enable); ++ isp_csi2_irq_status_set(enable); ++ isp_csi2_irq_set(enable); ++ } else { ++ isp_csi2_irq_set(enable); ++ isp_csi2_irq_status_set(enable); ++ isp_csi2_irq_ctx_set(enable); ++ isp_csi2_irq_complexio1_set(enable); ++ } ++ return; ++} ++EXPORT_SYMBOL(isp_csi2_irq_all_set); ++ ++/** ++ * isp_csi2_reset - Resets the CSI2 module. ++ * ++ * Returns 0 if successful, or -EBUSY if power command didn't respond. ++ **/ ++int isp_csi2_reset(void) ++{ ++ u32 reg; ++ u8 soft_reset_retries = 0; ++ int i; ++ ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_SYSCONFIG); ++ reg |= ISPCSI2_SYSCONFIG_SOFT_RESET_RESET; ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_SYSCONFIG); ++ ++ do { ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_SYSSTATUS) & ++ ISPCSI2_SYSSTATUS_RESET_DONE_MASK; ++ if (reg == ISPCSI2_SYSSTATUS_RESET_DONE_DONE) ++ break; ++ soft_reset_retries++; ++ if (soft_reset_retries < 5) ++ udelay(100); ++ } while (soft_reset_retries < 5); ++ ++ if (soft_reset_retries == 5) { ++ printk(KERN_ERR "CSI2: Soft reset try count exceeded!\n"); ++ return -EBUSY; ++ } ++ ++ reg = isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_SYSCONFIG); ++ reg &= ~ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK; ++ reg |= ISPCSI2_SYSCONFIG_MSTANDBY_MODE_NO; ++ reg &= ~ISPCSI2_SYSCONFIG_AUTO_IDLE_MASK; ++ isp_reg_writel(reg, OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_SYSCONFIG); ++ ++ uses_videoport = false; ++ update_complexio_cfg1 = false; ++ update_phy_cfg0 = false; ++ update_phy_cfg1 = false; ++ for (i = 0; i < 8; i++) { ++ update_ctx_ctrl1[i] = false; ++ update_ctx_ctrl2[i] = false; ++ update_ctx_ctrl3[i] = false; ++ } ++ update_timing = false; ++ update_ctrl = false; ++ ++ isp_csi2_complexio_lanes_get(); ++ isp_csi2_ctrl_get(); ++ isp_csi2_ctx_get_all(); ++ isp_csi2_phy_get(); ++ isp_csi2_timings_get_all(); ++ ++ isp_csi2_complexio_power_autoswitch(true); ++ isp_csi2_complexio_power(ISP_CSI2_POWER_ON); ++ ++ isp_csi2_timings_config_forcerxmode(1, true); ++ isp_csi2_timings_config_stopstate_cnt(1, 0x1FF); ++ isp_csi2_timings_update_all(true); ++ ++ return 0; ++} ++ ++/** ++ * isp_csi2_enable - Enables the CSI2 module. ++ * @enable: Enables/disables the CSI2 module. ++ **/ ++void isp_csi2_enable(int enable) ++{ ++ if (enable) { ++ isp_csi2_ctx_config_enabled(0, true); ++ isp_csi2_ctx_config_eof_enabled(0, true); ++ isp_csi2_ctx_config_checksum_enabled(0, true); ++ isp_csi2_ctx_update(0, false); ++ ++ isp_csi2_ctrl_config_ecc_enable(true); ++ isp_csi2_ctrl_config_if_enable(true); ++ isp_csi2_ctrl_update(false); ++ } else { ++ isp_csi2_ctx_config_enabled(0, false); ++ isp_csi2_ctx_config_eof_enabled(0, false); ++ isp_csi2_ctx_config_checksum_enabled(0, false); ++ isp_csi2_ctx_update(0, false); ++ ++ isp_csi2_ctrl_config_ecc_enable(false); ++ isp_csi2_ctrl_config_if_enable(false); ++ isp_csi2_ctrl_update(false); ++ } ++} ++EXPORT_SYMBOL(isp_csi2_enable); ++ ++/** ++ * isp_csi2_regdump - Prints CSI2 debug information. ++ **/ ++void isp_csi2_regdump(void) ++{ ++ printk(KERN_DEBUG "-------------Register dump-------------\n"); ++ ++ printk(KERN_DEBUG "ISP_CTRL: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_CTRL)); ++ printk(KERN_DEBUG "ISP_TCTRL_CTRL: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL)); ++ ++ printk(KERN_DEBUG "ISPCCDC_SDR_ADDR: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SDR_ADDR)); ++ printk(KERN_DEBUG "ISPCCDC_SYN_MODE: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_SYN_MODE)); ++ printk(KERN_DEBUG "ISPCCDC_CFG: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_CFG)); ++ printk(KERN_DEBUG "ISPCCDC_FMTCFG: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_FMTCFG)); ++ printk(KERN_DEBUG "ISPCCDC_HSIZE_OFF: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_HSIZE_OFF)); ++ printk(KERN_DEBUG "ISPCCDC_HORZ_INFO: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ISPCCDC_HORZ_INFO)); ++ printk(KERN_DEBUG "ISPCCDC_VERT_START: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_VERT_START)); ++ printk(KERN_DEBUG "ISPCCDC_VERT_LINES: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CCDC, ++ ISPCCDC_VERT_LINES)); ++ ++ printk(KERN_DEBUG "ISPCSI2_COMPLEXIO_CFG1: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_COMPLEXIO_CFG1)); ++ printk(KERN_DEBUG "ISPCSI2_SYSSTATUS: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_SYSSTATUS)); ++ printk(KERN_DEBUG "ISPCSI2_SYSCONFIG: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_SYSCONFIG)); ++ printk(KERN_DEBUG "ISPCSI2_IRQENABLE: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_IRQENABLE)); ++ printk(KERN_DEBUG "ISPCSI2_IRQSTATUS: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_IRQSTATUS)); ++ ++ printk(KERN_DEBUG "ISPCSI2_CTX_IRQENABLE(0): %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_IRQENABLE(0))); ++ printk(KERN_DEBUG "ISPCSI2_CTX_IRQSTATUS(0): %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_IRQSTATUS(0))); ++ printk(KERN_DEBUG "ISPCSI2_TIMING: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_TIMING)); ++ printk(KERN_DEBUG "ISPCSI2PHY_CFG0: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2PHY, ++ ISPCSI2PHY_CFG0)); ++ printk(KERN_DEBUG "ISPCSI2PHY_CFG1: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2PHY, ++ ISPCSI2PHY_CFG1)); ++ printk(KERN_DEBUG "ISPCSI2_CTX_CTRL1(0): %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_CTRL1(0))); ++ printk(KERN_DEBUG "ISPCSI2_CTX_CTRL2(0): %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_CTRL2(0))); ++ printk(KERN_DEBUG "ISPCSI2_CTX_CTRL3(0): %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_CTRL3(0))); ++ printk(KERN_DEBUG "ISPCSI2_CTX_DAT_OFST(0): %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_DAT_OFST(0))); ++ printk(KERN_DEBUG "ISPCSI2_CTX_DAT_PING_ADDR(0): %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_DAT_PING_ADDR(0))); ++ printk(KERN_DEBUG "ISPCSI2_CTX_DAT_PONG_ADDR(0): %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ++ ISPCSI2_CTX_DAT_PONG_ADDR(0))); ++ printk(KERN_DEBUG "ISPCSI2_CTRL: %x\n", ++ isp_reg_readl(OMAP3_ISP_IOMEM_CSI2A, ISPCSI2_CTRL)); ++ printk(KERN_DEBUG "---------------------------------------\n"); ++} ++ ++/** ++ * isp_csi2_cleanup - Routine for module driver cleanup ++ **/ ++void isp_csi2_cleanup(void) ++{ ++ return; ++} ++ ++/** ++ * isp_csi2_init - Routine for module driver init ++ **/ ++int __init isp_csi2_init(void) ++{ ++ int i; ++ ++ update_complexio_cfg1 = false; ++ update_phy_cfg0 = false; ++ update_phy_cfg1 = false; ++ for (i = 0; i < 8; i++) { ++ update_ctx_ctrl1[i] = false; ++ update_ctx_ctrl2[i] = false; ++ update_ctx_ctrl3[i] = false; ++ } ++ update_timing = false; ++ update_ctrl = false; ++ ++ memset(¤t_csi2_cfg, 0, sizeof(current_csi2_cfg)); ++ memset(¤t_csi2_cfg_update, 0, sizeof(current_csi2_cfg_update)); ++ return 0; ++} ++ ++MODULE_AUTHOR("Texas Instruments"); ++MODULE_DESCRIPTION("ISP CSI2 Receiver Module"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/media/video/isp/ispcsi2.h b/drivers/media/video/isp/ispcsi2.h +new file mode 100644 +index 0000000..4582c96 +--- /dev/null ++++ b/drivers/media/video/isp/ispcsi2.h +@@ -0,0 +1,232 @@ ++/* ++ * ispcsi2.h ++ * ++ * Copyright (C) 2009 Texas Instruments. ++ * ++ * Contributors: ++ * Sergio Aguirre ++ * Dominic Curran ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#ifndef OMAP_ISP_CSI2_API_H ++#define OMAP_ISP_CSI2_API_H ++#include ++ ++enum isp_csi2_irqevents { ++ OCP_ERR_IRQ = 0x4000, ++ SHORT_PACKET_IRQ = 0x2000, ++ ECC_CORRECTION_IRQ = 0x1000, ++ ECC_NO_CORRECTION_IRQ = 0x800, ++ COMPLEXIO2_ERR_IRQ = 0x400, ++ COMPLEXIO1_ERR_IRQ = 0x200, ++ FIFO_OVF_IRQ = 0x100, ++ CONTEXT7 = 0x80, ++ CONTEXT6 = 0x40, ++ CONTEXT5 = 0x20, ++ CONTEXT4 = 0x10, ++ CONTEXT3 = 0x8, ++ CONTEXT2 = 0x4, ++ CONTEXT1 = 0x2, ++ CONTEXT0 = 0x1, ++}; ++ ++enum isp_csi2_ctx_irqevents { ++ CTX_ECC_CORRECTION = 0x100, ++ CTX_LINE_NUMBER = 0x80, ++ CTX_FRAME_NUMBER = 0x40, ++ CTX_CS = 0x20, ++ CTX_LE = 0x8, ++ CTX_LS = 0x4, ++ CTX_FE = 0x2, ++ CTX_FS = 0x1, ++}; ++ ++enum isp_csi2_power_cmds { ++ ISP_CSI2_POWER_OFF, ++ ISP_CSI2_POWER_ON, ++ ISP_CSI2_POWER_ULPW, ++}; ++ ++enum isp_csi2_frame_mode { ++ ISP_CSI2_FRAME_IMMEDIATE, ++ ISP_CSI2_FRAME_AFTERFEC, ++}; ++ ++struct csi2_lanecfg { ++ u8 pos; ++ u8 pol; ++}; ++ ++struct isp_csi2_lanes_cfg { ++ struct csi2_lanecfg data[4]; ++ struct csi2_lanecfg clk; ++}; ++ ++struct isp_csi2_lanes_cfg_update { ++ bool data[4]; ++ bool clk; ++}; ++ ++struct isp_csi2_phy_cfg { ++ u8 ths_term; ++ u8 ths_settle; ++ u8 tclk_term; ++ unsigned tclk_miss:1; ++ u8 tclk_settle; ++}; ++ ++struct isp_csi2_phy_cfg_update { ++ bool ths_term; ++ bool ths_settle; ++ bool tclk_term; ++ bool tclk_miss; ++ bool tclk_settle; ++}; ++ ++struct isp_csi2_ctx_cfg { ++ u8 virtual_id; ++ u8 frame_count; ++ struct v4l2_pix_format format; ++ u16 alpha; ++ u16 data_offset; ++ u32 ping_addr; ++ u32 pong_addr; ++ bool eof_enabled; ++ bool eol_enabled; ++ bool checksum_enabled; ++ bool enabled; ++}; ++ ++struct isp_csi2_ctx_cfg_update { ++ bool virtual_id; ++ bool frame_count; ++ bool format; ++ bool alpha; ++ bool data_offset; ++ bool ping_addr; ++ bool pong_addr; ++ bool eof_enabled; ++ bool eol_enabled; ++ bool checksum_enabled; ++ bool enabled; ++}; ++ ++struct isp_csi2_timings_cfg { ++ bool force_rx_mode; ++ bool stop_state_16x; ++ bool stop_state_4x; ++ u16 stop_state_counter; ++}; ++ ++struct isp_csi2_timings_cfg_update { ++ bool force_rx_mode; ++ bool stop_state_16x; ++ bool stop_state_4x; ++ bool stop_state_counter; ++}; ++ ++struct isp_csi2_ctrl_cfg { ++ bool vp_clk_enable; ++ bool vp_only_enable; ++ u8 vp_out_ctrl; ++ bool debug_enable; ++ u8 burst_size; ++ enum isp_csi2_frame_mode frame_mode; ++ bool ecc_enable; ++ bool secure_mode; ++ bool if_enable; ++}; ++ ++struct isp_csi2_ctrl_cfg_update { ++ bool vp_clk_enable; ++ bool vp_only_enable; ++ bool vp_out_ctrl; ++ bool debug_enable; ++ bool burst_size; ++ bool frame_mode; ++ bool ecc_enable; ++ bool secure_mode; ++ bool if_enable; ++}; ++ ++struct isp_csi2_cfg { ++ struct isp_csi2_lanes_cfg lanes; ++ struct isp_csi2_phy_cfg phy; ++ struct isp_csi2_ctx_cfg contexts[8]; ++ struct isp_csi2_timings_cfg timings[2]; ++ struct isp_csi2_ctrl_cfg ctrl; ++}; ++ ++struct isp_csi2_cfg_update { ++ struct isp_csi2_lanes_cfg_update lanes; ++ struct isp_csi2_phy_cfg_update phy; ++ struct isp_csi2_ctx_cfg_update contexts[8]; ++ struct isp_csi2_timings_cfg_update timings[2]; ++ struct isp_csi2_ctrl_cfg_update ctrl; ++}; ++ ++int isp_csi2_complexio_lanes_config(struct isp_csi2_lanes_cfg *reqcfg); ++int isp_csi2_complexio_lanes_update(bool force_update); ++int isp_csi2_complexio_lanes_get(void); ++int isp_csi2_complexio_power_autoswitch(bool enable); ++int isp_csi2_complexio_power(enum isp_csi2_power_cmds power_cmd); ++int isp_csi2_ctrl_config_frame_mode(enum isp_csi2_frame_mode frame_mode); ++int isp_csi2_ctrl_config_vp_clk_enable(bool vp_clk_enable); ++int isp_csi2_ctrl_config_vp_only_enable(bool vp_only_enable); ++int isp_csi2_ctrl_config_debug_enable(bool debug_enable); ++int isp_csi2_ctrl_config_burst_size(u8 burst_size); ++int isp_csi2_ctrl_config_ecc_enable(bool ecc_enable); ++int isp_csi2_ctrl_config_secure_mode(bool secure_mode); ++int isp_csi2_ctrl_config_if_enable(bool if_enable); ++int isp_csi2_ctrl_config_vp_out_ctrl(u8 vp_out_ctrl); ++int isp_csi2_ctrl_update(bool force_update); ++int isp_csi2_ctrl_get(void); ++int isp_csi2_ctx_config_virtual_id(u8 ctxnum, u8 virtual_id); ++int isp_csi2_ctx_config_frame_count(u8 ctxnum, u8 frame_count); ++int isp_csi2_ctx_config_format(u8 ctxnum, u32 pixformat); ++int isp_csi2_ctx_config_alpha(u8 ctxnum, u16 alpha); ++int isp_csi2_ctx_config_data_offset(u8 ctxnum, u16 data_offset); ++int isp_csi2_ctx_config_ping_addr(u8 ctxnum, u32 ping_addr); ++int isp_csi2_ctx_config_pong_addr(u8 ctxnum, u32 pong_addr); ++int isp_csi2_ctx_config_eof_enabled(u8 ctxnum, bool eof_enabled); ++int isp_csi2_ctx_config_eol_enabled(u8 ctxnum, bool eol_enabled); ++int isp_csi2_ctx_config_checksum_enabled(u8 ctxnum, bool checksum_enabled); ++int isp_csi2_ctx_config_enabled(u8 ctxnum, bool enabled); ++int isp_csi2_ctx_update(u8 ctxnum, bool force_update); ++int isp_csi2_ctx_get(u8 ctxnum); ++int isp_csi2_ctx_update_all(bool force_update); ++int isp_csi2_ctx_get_all(void); ++int isp_csi2_phy_config(struct isp_csi2_phy_cfg *desiredphyconfig); ++int isp_csi2_calc_phy_cfg0(u32 mipiclk, u32 lbound_hs_settle, ++ u32 ubound_hs_settle); ++int isp_csi2_phy_update(bool force_update); ++int isp_csi2_phy_get(void); ++int isp_csi2_timings_config_forcerxmode(u8 io, bool force_rx_mode); ++int isp_csi2_timings_config_stopstate_16x(u8 io, bool stop_state_16x); ++int isp_csi2_timings_config_stopstate_4x(u8 io, bool stop_state_4x); ++int isp_csi2_timings_config_stopstate_cnt(u8 io, u16 stop_state_counter); ++int isp_csi2_timings_update(u8 io, bool force_update); ++int isp_csi2_timings_get(u8 io); ++int isp_csi2_timings_update_all(bool force_update); ++int isp_csi2_timings_get_all(void); ++void isp_csi2_irq_complexio1_set(int enable); ++void isp_csi2_irq_ctx_set(int enable); ++void isp_csi2_irq_status_set(int enable); ++void isp_csi2_irq_set(int enable); ++void isp_csi2_irq_all_set(int enable); ++ ++void isp_csi2_isr(void); ++int isp_csi2_reset(void); ++void isp_csi2_enable(int enable); ++void isp_csi2_regdump(void); ++ ++#endif /* OMAP_ISP_CSI2_H */ ++ +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0008-omap3isp-Add-ISP-tables.patch b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0008-omap3isp-Add-ISP-tables.patch new file mode 100644 index 000000000..db023e514 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0008-omap3isp-Add-ISP-tables.patch @@ -0,0 +1,4018 @@ +From 5de7cb2cac5f7d76cb025ddc8fb09c99a1007e08 Mon Sep 17 00:00:00 2001 +From: Sakari Ailus +Date: Tue, 10 Mar 2009 10:49:02 +0200 +Subject: [PATCH] omap3isp: Add ISP tables + +* Blue Gamma gain table +* CFA gain table +* Green Gamma gain table +* Luma Enhancement gain table +* Noise filter gain table +* Red Gamma gain table + +TODO: + +- Get rid of this kind of tables. Either generate them at runtime or + use a user space program to fill defaults. + +Signed-off-by: Sakari Ailus +--- + drivers/media/video/isp/bluegamma_table.h | 1040 ++++++++++++++++++++++++++ + drivers/media/video/isp/cfa_coef_table.h | 603 +++++++++++++++ + drivers/media/video/isp/greengamma_table.h | 1040 ++++++++++++++++++++++++++ + drivers/media/video/isp/luma_enhance_table.h | 144 ++++ + drivers/media/video/isp/noise_filter_table.h | 79 ++ + drivers/media/video/isp/redgamma_table.h | 1040 ++++++++++++++++++++++++++ + 6 files changed, 3946 insertions(+), 0 deletions(-) + create mode 100644 drivers/media/video/isp/bluegamma_table.h + create mode 100644 drivers/media/video/isp/cfa_coef_table.h + create mode 100644 drivers/media/video/isp/greengamma_table.h + create mode 100644 drivers/media/video/isp/luma_enhance_table.h + create mode 100644 drivers/media/video/isp/noise_filter_table.h + create mode 100644 drivers/media/video/isp/redgamma_table.h + +diff --git a/drivers/media/video/isp/bluegamma_table.h b/drivers/media/video/isp/bluegamma_table.h +new file mode 100644 +index 0000000..301382a +--- /dev/null ++++ b/drivers/media/video/isp/bluegamma_table.h +@@ -0,0 +1,1040 @@ ++/* ++ * bluegamma_table.h ++ * ++ * Gamma Table values for BLUE for TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++0, ++0, ++1, ++2, ++3, ++3, ++4, ++5, ++6, ++8, ++10, ++12, ++14, ++16, ++18, ++20, ++22, ++23, ++25, ++26, ++28, ++29, ++31, ++32, ++34, ++35, ++36, ++37, ++39, ++40, ++41, ++42, ++43, ++44, ++45, ++46, ++47, ++48, ++49, ++50, ++51, ++52, ++52, ++53, ++54, ++55, ++56, ++57, ++58, ++59, ++60, ++61, ++62, ++63, ++63, ++64, ++65, ++66, ++66, ++67, ++68, ++69, ++69, ++70, ++71, ++72, ++72, ++73, ++74, ++75, ++75, ++76, ++77, ++78, ++78, ++79, ++80, ++81, ++81, ++82, ++83, ++84, ++84, ++85, ++86, ++87, ++88, ++88, ++89, ++90, ++91, ++91, ++92, ++93, ++94, ++94, ++95, ++96, ++97, ++97, ++98, ++98, ++99, ++99, ++100, ++100, ++101, ++101, ++102, ++103, ++104, ++104, ++105, ++106, ++107, ++108, ++108, ++109, ++110, ++111, ++111, ++112, ++113, ++114, ++114, ++115, ++116, ++117, ++117, ++118, ++119, ++119, ++120, ++120, ++121, ++121, ++122, ++122, ++123, ++123, ++124, ++124, ++125, ++125, ++126, ++126, ++127, ++127, ++128, ++128, ++129, ++129, ++130, ++130, ++131, ++131, ++132, ++132, ++133, ++133, ++134, ++134, ++135, ++135, ++136, ++136, ++137, ++137, ++138, ++138, ++139, ++139, ++140, ++140, ++141, ++141, ++142, ++142, ++143, ++143, ++144, ++144, ++145, ++145, ++146, ++146, ++147, ++147, ++148, ++148, ++149, ++149, ++150, ++150, ++151, ++151, ++152, ++152, ++153, ++153, ++153, ++153, ++154, ++154, ++154, ++154, ++155, ++155, ++156, ++156, ++157, ++157, ++158, ++158, ++158, ++159, ++159, ++159, ++160, ++160, ++160, ++161, ++161, ++162, ++162, ++163, ++163, ++164, ++164, ++164, ++164, ++165, ++165, ++165, ++165, ++166, ++166, ++167, ++167, ++168, ++168, ++169, ++169, ++170, ++170, ++170, ++170, ++171, ++171, ++171, ++171, ++172, ++172, ++173, ++173, ++174, ++174, ++175, ++175, ++176, ++176, ++176, ++176, ++177, ++177, ++177, ++177, ++178, ++178, ++178, ++178, ++179, ++179, ++179, ++179, ++180, ++180, ++180, ++180, ++181, ++181, ++181, ++181, ++182, ++182, ++182, ++182, ++183, ++183, ++183, ++183, ++184, ++184, ++184, ++184, ++185, ++185, ++185, ++185, ++186, ++186, ++186, ++186, ++187, ++187, ++187, ++187, ++188, ++188, ++188, ++188, ++189, ++189, ++189, ++189, ++190, ++190, ++190, ++190, ++191, ++191, ++191, ++191, ++192, ++192, ++192, ++192, ++193, ++193, ++193, ++193, ++194, ++194, ++194, ++194, ++195, ++195, ++195, ++195, ++196, ++196, ++196, ++196, ++197, ++197, ++197, ++197, ++198, ++198, ++198, ++198, ++199, ++199, ++199, ++199, ++200, ++200, ++200, ++200, ++201, ++201, ++201, ++201, ++202, ++202, ++202, ++203, ++203, ++203, ++203, ++204, ++204, ++204, ++204, ++205, ++205, ++205, ++205, ++206, ++206, ++206, ++206, ++207, ++207, ++207, ++207, ++208, ++208, ++208, ++208, ++209, ++209, ++209, ++209, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++211, ++211, ++211, ++211, ++211, ++211, ++211, ++211, ++211, ++211, ++211, ++212, ++212, ++212, ++212, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++214, ++214, ++214, ++214, ++215, ++215, ++215, ++215, ++215, ++215, ++215, ++215, ++215, ++215, ++215, ++216, ++216, ++216, ++216, ++217, ++217, ++217, ++217, ++218, ++218, ++218, ++218, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++220, ++220, ++220, ++220, ++221, ++221, ++221, ++221, ++221, ++221, ++221, ++221, ++221, ++221, ++221, ++222, ++222, ++222, ++222, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++224, ++224, ++224, ++224, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++226, ++226, ++226, ++226, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++228, ++228, ++228, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++230, ++230, ++230, ++230, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++233, ++233, ++233, ++233, ++234, ++234, ++234, ++234, ++234, ++234, ++234, ++234, ++234, ++234, ++234, ++235, ++235, ++235, ++235, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++237, ++237, ++237, ++237, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++239, ++239, ++239, ++239, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++241, ++241, ++241, ++241, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++243, ++243, ++243, ++243, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++245, ++245, ++245, ++245, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++247, ++247, ++247, ++247, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++249, ++249, ++249, ++249, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++251, ++251, ++251, ++251, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++254, ++254, ++254, ++254, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255 +diff --git a/drivers/media/video/isp/cfa_coef_table.h b/drivers/media/video/isp/cfa_coef_table.h +new file mode 100644 +index 0000000..8cafa1f +--- /dev/null ++++ b/drivers/media/video/isp/cfa_coef_table.h +@@ -0,0 +1,603 @@ ++/* ++ * cfa_coef_table.h ++ * ++ * Copyright (C) 2009 Nokia Corporation ++ * ++ * Contact: Sakari Ailus ++ * Tuukka Toivonen ++ * ++ * Written by Gjorgji Rosikopulos ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA ++ * 02110-1301 USA ++ * ++ */ ++ ++244, ++0, ++247, ++0, ++12, ++27, ++36, ++247, ++250, ++0, ++27, ++0, ++4, ++250, ++12, ++244, ++248, ++0, ++0, ++0, ++0, ++40, ++0, ++0, ++244, ++12, ++250, ++4, ++0, ++27, ++0, ++250, ++247, ++36, ++27, ++12, ++0, ++247, ++0, ++244, ++0, ++0, ++40, ++0, ++0, ++0, ++0, ++248, ++244, ++0, ++247, ++0, ++12, ++27, ++36, ++247, ++250, ++0, ++27, ++0, ++4, ++250, ++12, ++244, ++248, ++0, ++0, ++0, ++0, ++40, ++0, ++0, ++244, ++12, ++250, ++4, ++0, ++27, ++0, ++250, ++247, ++36, ++27, ++12, ++0, ++247, ++0, ++244, ++0, ++0, ++40, ++0, ++0, ++0, ++0, ++248, ++244, ++0, ++247, ++0, ++12, ++27, ++36, ++247, ++250, ++0, ++27, ++0, ++4, ++250, ++12, ++244, ++248, ++0, ++0, ++0, ++0, ++40, ++0, ++0, ++244, ++12, ++250, ++4, ++0, ++27, ++0, ++250, ++247, ++36, ++27, ++12, ++0, ++247, ++0, ++244, ++0, ++0, ++40, ++0, ++0, ++0, ++0, ++248, ++0, ++247, ++0, ++244, ++247, ++36, ++27, ++12, ++0, ++27, ++0, ++250, ++244, ++12, ++250, ++4, ++0, ++0, ++0, ++248, ++0, ++0, ++40, ++0, ++4, ++250, ++12, ++244, ++250, ++0, ++27, ++0, ++12, ++27, ++36, ++247, ++244, ++0, ++247, ++0, ++0, ++40, ++0, ++0, ++248, ++0, ++0, ++0, ++0, ++247, ++0, ++244, ++247, ++36, ++27, ++12, ++0, ++27, ++0, ++250, ++244, ++12, ++250, ++4, ++0, ++0, ++0, ++248, ++0, ++0, ++40, ++0, ++4, ++250, ++12, ++244, ++250, ++0, ++27, ++0, ++12, ++27, ++36, ++247, ++244, ++0, ++247, ++0, ++0, ++40, ++0, ++0, ++248, ++0, ++0, ++0, ++0, ++247, ++0, ++244, ++247, ++36, ++27, ++12, ++0, ++27, ++0, ++250, ++244, ++12, ++250, ++4, ++0, ++0, ++0, ++248, ++0, ++0, ++40, ++0, ++4, ++250, ++12, ++244, ++250, ++0, ++27, ++0, ++12, ++27, ++36, ++247, ++244, ++0, ++247, ++0, ++0, ++40, ++0, ++0, ++248, ++0, ++0, ++0, ++4, ++250, ++12, ++244, ++250, ++0, ++27, ++0, ++12, ++27, ++36, ++247, ++244, ++0, ++247, ++0, ++0, ++0, ++0, ++248, ++0, ++0, ++40, ++0, ++0, ++247, ++0, ++244, ++247, ++36, ++27, ++12, ++0, ++27, ++0, ++250, ++244, ++12, ++250, ++4, ++0, ++40, ++0, ++0, ++248, ++0, ++0, ++0, ++4, ++250, ++12, ++244, ++250, ++0, ++27, ++0, ++12, ++27, ++36, ++247, ++244, ++0, ++247, ++0, ++0, ++0, ++0, ++248, ++0, ++0, ++40, ++0, ++0, ++247, ++0, ++244, ++247, ++36, ++27, ++12, ++0, ++27, ++0, ++250, ++244, ++12, ++250, ++4, ++0, ++40, ++0, ++0, ++248, ++0, ++0, ++0, ++4, ++250, ++12, ++244, ++250, ++0, ++27, ++0, ++12, ++27, ++36, ++247, ++244, ++0, ++247, ++0, ++0, ++0, ++0, ++248, ++0, ++0, ++40, ++0, ++0, ++247, ++0, ++244, ++247, ++36, ++27, ++12, ++0, ++27, ++0, ++250, ++244, ++12, ++250, ++4, ++0, ++40, ++0, ++0, ++248, ++0, ++0, ++0, ++244, ++12, ++250, ++4, ++0, ++27, ++0, ++250, ++247, ++36, ++27, ++12, ++0, ++247, ++0, ++244, ++248, ++0, ++0, ++0, ++0, ++40, ++0, ++0, ++244, ++0, ++247, ++0, ++12, ++27, ++36, ++247, ++250, ++0, ++27, ++0, ++4, ++250, ++12, ++244, ++0, ++0, ++40, ++0, ++0, ++0, ++0, ++248, ++244, ++12, ++250, ++4, ++0, ++27, ++0, ++250, ++247, ++36, ++27, ++12, ++0, ++247, ++0, ++244, ++248, ++0, ++0, ++0, ++0, ++40, ++0, ++0, ++244, ++0, ++247, ++0, ++12, ++27, ++36, ++247, ++250, ++0, ++27, ++0, ++4, ++250, ++12, ++244, ++0, ++0, ++40, ++0, ++0, ++0, ++0, ++248, ++244, ++12, ++250, ++4, ++0, ++27, ++0, ++250, ++247, ++36, ++27, ++12, ++0, ++247, ++0, ++244, ++248, ++0, ++0, ++0, ++0, ++40, ++0, ++0, ++244, ++0, ++247, ++0, ++12, ++27, ++36, ++247, ++250, ++0, ++27, ++0, ++4, ++250, ++12, ++244, ++0, ++0, ++40, ++0, ++0, ++0, ++0, ++248 ++ +diff --git a/drivers/media/video/isp/greengamma_table.h b/drivers/media/video/isp/greengamma_table.h +new file mode 100644 +index 0000000..0f5c5e4 +--- /dev/null ++++ b/drivers/media/video/isp/greengamma_table.h +@@ -0,0 +1,1040 @@ ++/* ++ * greengamma_table.h ++ * ++ * Gamma Table values for GREEN for TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++0, ++0, ++1, ++2, ++3, ++3, ++4, ++5, ++6, ++8, ++10, ++12, ++14, ++16, ++18, ++20, ++22, ++23, ++25, ++26, ++28, ++29, ++31, ++32, ++34, ++35, ++36, ++37, ++39, ++40, ++41, ++42, ++43, ++44, ++45, ++46, ++47, ++48, ++49, ++50, ++51, ++52, ++52, ++53, ++54, ++55, ++56, ++57, ++58, ++59, ++60, ++61, ++62, ++63, ++63, ++64, ++65, ++66, ++66, ++67, ++68, ++69, ++69, ++70, ++71, ++72, ++72, ++73, ++74, ++75, ++75, ++76, ++77, ++78, ++78, ++79, ++80, ++81, ++81, ++82, ++83, ++84, ++84, ++85, ++86, ++87, ++88, ++88, ++89, ++90, ++91, ++91, ++92, ++93, ++94, ++94, ++95, ++96, ++97, ++97, ++98, ++98, ++99, ++99, ++100, ++100, ++101, ++101, ++102, ++103, ++104, ++104, ++105, ++106, ++107, ++108, ++108, ++109, ++110, ++111, ++111, ++112, ++113, ++114, ++114, ++115, ++116, ++117, ++117, ++118, ++119, ++119, ++120, ++120, ++121, ++121, ++122, ++122, ++123, ++123, ++124, ++124, ++125, ++125, ++126, ++126, ++127, ++127, ++128, ++128, ++129, ++129, ++130, ++130, ++131, ++131, ++132, ++132, ++133, ++133, ++134, ++134, ++135, ++135, ++136, ++136, ++137, ++137, ++138, ++138, ++139, ++139, ++140, ++140, ++141, ++141, ++142, ++142, ++143, ++143, ++144, ++144, ++145, ++145, ++146, ++146, ++147, ++147, ++148, ++148, ++149, ++149, ++150, ++150, ++151, ++151, ++152, ++152, ++153, ++153, ++153, ++153, ++154, ++154, ++154, ++154, ++155, ++155, ++156, ++156, ++157, ++157, ++158, ++158, ++158, ++159, ++159, ++159, ++160, ++160, ++160, ++161, ++161, ++162, ++162, ++163, ++163, ++164, ++164, ++164, ++164, ++165, ++165, ++165, ++165, ++166, ++166, ++167, ++167, ++168, ++168, ++169, ++169, ++170, ++170, ++170, ++170, ++171, ++171, ++171, ++171, ++172, ++172, ++173, ++173, ++174, ++174, ++175, ++175, ++176, ++176, ++176, ++176, ++177, ++177, ++177, ++177, ++178, ++178, ++178, ++178, ++179, ++179, ++179, ++179, ++180, ++180, ++180, ++180, ++181, ++181, ++181, ++181, ++182, ++182, ++182, ++182, ++183, ++183, ++183, ++183, ++184, ++184, ++184, ++184, ++185, ++185, ++185, ++185, ++186, ++186, ++186, ++186, ++187, ++187, ++187, ++187, ++188, ++188, ++188, ++188, ++189, ++189, ++189, ++189, ++190, ++190, ++190, ++190, ++191, ++191, ++191, ++191, ++192, ++192, ++192, ++192, ++193, ++193, ++193, ++193, ++194, ++194, ++194, ++194, ++195, ++195, ++195, ++195, ++196, ++196, ++196, ++196, ++197, ++197, ++197, ++197, ++198, ++198, ++198, ++198, ++199, ++199, ++199, ++199, ++200, ++200, ++200, ++200, ++201, ++201, ++201, ++201, ++202, ++202, ++202, ++203, ++203, ++203, ++203, ++204, ++204, ++204, ++204, ++205, ++205, ++205, ++205, ++206, ++206, ++206, ++206, ++207, ++207, ++207, ++207, ++208, ++208, ++208, ++208, ++209, ++209, ++209, ++209, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++211, ++211, ++211, ++211, ++211, ++211, ++211, ++211, ++211, ++211, ++211, ++212, ++212, ++212, ++212, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++214, ++214, ++214, ++214, ++215, ++215, ++215, ++215, ++215, ++215, ++215, ++215, ++215, ++215, ++215, ++216, ++216, ++216, ++216, ++217, ++217, ++217, ++217, ++218, ++218, ++218, ++218, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++220, ++220, ++220, ++220, ++221, ++221, ++221, ++221, ++221, ++221, ++221, ++221, ++221, ++221, ++221, ++222, ++222, ++222, ++222, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++224, ++224, ++224, ++224, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++226, ++226, ++226, ++226, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++228, ++228, ++228, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++230, ++230, ++230, ++230, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++233, ++233, ++233, ++233, ++234, ++234, ++234, ++234, ++234, ++234, ++234, ++234, ++234, ++234, ++234, ++235, ++235, ++235, ++235, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++237, ++237, ++237, ++237, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++239, ++239, ++239, ++239, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++241, ++241, ++241, ++241, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++243, ++243, ++243, ++243, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++245, ++245, ++245, ++245, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++247, ++247, ++247, ++247, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++249, ++249, ++249, ++249, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++251, ++251, ++251, ++251, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++254, ++254, ++254, ++254, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255 +diff --git a/drivers/media/video/isp/luma_enhance_table.h b/drivers/media/video/isp/luma_enhance_table.h +new file mode 100644 +index 0000000..99c8b05 +--- /dev/null ++++ b/drivers/media/video/isp/luma_enhance_table.h +@@ -0,0 +1,144 @@ ++/* ++ * luma_enhance_table.h ++ * ++ * Luminance Enhancement table values for TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1047552, ++1048575, ++1047551, ++1046527, ++1045503, ++1044479, ++1043455, ++1042431, ++1041407, ++1040383, ++1039359, ++1038335, ++1037311, ++1036287, ++1035263, ++1034239, ++1033215, ++1032191, ++1031167, ++1030143, ++1028096, ++1028096, ++1028096, ++1028096, ++1028096, ++1028096, ++1028096, ++1028096, ++1028096, ++1028096, ++1028100, ++1032196, ++1036292, ++1040388, ++1044484, ++0, ++0, ++0, ++5, ++5125, ++10245, ++15365, ++20485, ++25605, ++30720, ++30720, ++30720, ++30720, ++30720, ++30720, ++30720, ++30720, ++30720, ++30720, ++30720, ++31743, ++30719, ++29695, ++28671, ++27647, ++26623, ++25599, ++24575, ++23551, ++22527, ++21503, ++20479, ++19455, ++18431, ++17407, ++16383, ++15359, ++14335, ++13311, ++12287, ++11263, ++10239, ++9215, ++8191, ++7167, ++6143, ++5119, ++4095, ++3071, ++1024, ++1024, ++1024, ++1024, ++1024, ++1024, ++1024, ++1024, ++1024, ++1024, ++1024, ++1024, ++1024, ++1024, ++1024, ++1024, ++1024 +diff --git a/drivers/media/video/isp/noise_filter_table.h b/drivers/media/video/isp/noise_filter_table.h +new file mode 100644 +index 0000000..7345f90 +--- /dev/null ++++ b/drivers/media/video/isp/noise_filter_table.h +@@ -0,0 +1,79 @@ ++/* ++ * noise_filter_table.h ++ * ++ * Noise Filter Table values for TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++16, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31, ++31 +diff --git a/drivers/media/video/isp/redgamma_table.h b/drivers/media/video/isp/redgamma_table.h +new file mode 100644 +index 0000000..ad0232a +--- /dev/null ++++ b/drivers/media/video/isp/redgamma_table.h +@@ -0,0 +1,1040 @@ ++/* ++ * redgamma_table.h ++ * ++ * Gamma Table values for RED for TI's OMAP3 Camera ISP ++ * ++ * Copyright (C) 2009 Texas Instruments, Inc. ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++0, ++0, ++1, ++2, ++3, ++3, ++4, ++5, ++6, ++8, ++10, ++12, ++14, ++16, ++18, ++20, ++22, ++23, ++25, ++26, ++28, ++29, ++31, ++32, ++34, ++35, ++36, ++37, ++39, ++40, ++41, ++42, ++43, ++44, ++45, ++46, ++47, ++48, ++49, ++50, ++51, ++52, ++52, ++53, ++54, ++55, ++56, ++57, ++58, ++59, ++60, ++61, ++62, ++63, ++63, ++64, ++65, ++66, ++66, ++67, ++68, ++69, ++69, ++70, ++71, ++72, ++72, ++73, ++74, ++75, ++75, ++76, ++77, ++78, ++78, ++79, ++80, ++81, ++81, ++82, ++83, ++84, ++84, ++85, ++86, ++87, ++88, ++88, ++89, ++90, ++91, ++91, ++92, ++93, ++94, ++94, ++95, ++96, ++97, ++97, ++98, ++98, ++99, ++99, ++100, ++100, ++101, ++101, ++102, ++103, ++104, ++104, ++105, ++106, ++107, ++108, ++108, ++109, ++110, ++111, ++111, ++112, ++113, ++114, ++114, ++115, ++116, ++117, ++117, ++118, ++119, ++119, ++120, ++120, ++121, ++121, ++122, ++122, ++123, ++123, ++124, ++124, ++125, ++125, ++126, ++126, ++127, ++127, ++128, ++128, ++129, ++129, ++130, ++130, ++131, ++131, ++132, ++132, ++133, ++133, ++134, ++134, ++135, ++135, ++136, ++136, ++137, ++137, ++138, ++138, ++139, ++139, ++140, ++140, ++141, ++141, ++142, ++142, ++143, ++143, ++144, ++144, ++145, ++145, ++146, ++146, ++147, ++147, ++148, ++148, ++149, ++149, ++150, ++150, ++151, ++151, ++152, ++152, ++153, ++153, ++153, ++153, ++154, ++154, ++154, ++154, ++155, ++155, ++156, ++156, ++157, ++157, ++158, ++158, ++158, ++159, ++159, ++159, ++160, ++160, ++160, ++161, ++161, ++162, ++162, ++163, ++163, ++164, ++164, ++164, ++164, ++165, ++165, ++165, ++165, ++166, ++166, ++167, ++167, ++168, ++168, ++169, ++169, ++170, ++170, ++170, ++170, ++171, ++171, ++171, ++171, ++172, ++172, ++173, ++173, ++174, ++174, ++175, ++175, ++176, ++176, ++176, ++176, ++177, ++177, ++177, ++177, ++178, ++178, ++178, ++178, ++179, ++179, ++179, ++179, ++180, ++180, ++180, ++180, ++181, ++181, ++181, ++181, ++182, ++182, ++182, ++182, ++183, ++183, ++183, ++183, ++184, ++184, ++184, ++184, ++185, ++185, ++185, ++185, ++186, ++186, ++186, ++186, ++187, ++187, ++187, ++187, ++188, ++188, ++188, ++188, ++189, ++189, ++189, ++189, ++190, ++190, ++190, ++190, ++191, ++191, ++191, ++191, ++192, ++192, ++192, ++192, ++193, ++193, ++193, ++193, ++194, ++194, ++194, ++194, ++195, ++195, ++195, ++195, ++196, ++196, ++196, ++196, ++197, ++197, ++197, ++197, ++198, ++198, ++198, ++198, ++199, ++199, ++199, ++199, ++200, ++200, ++200, ++200, ++201, ++201, ++201, ++201, ++202, ++202, ++202, ++203, ++203, ++203, ++203, ++204, ++204, ++204, ++204, ++205, ++205, ++205, ++205, ++206, ++206, ++206, ++206, ++207, ++207, ++207, ++207, ++208, ++208, ++208, ++208, ++209, ++209, ++209, ++209, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++210, ++211, ++211, ++211, ++211, ++211, ++211, ++211, ++211, ++211, ++211, ++211, ++212, ++212, ++212, ++212, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++213, ++214, ++214, ++214, ++214, ++215, ++215, ++215, ++215, ++215, ++215, ++215, ++215, ++215, ++215, ++215, ++216, ++216, ++216, ++216, ++217, ++217, ++217, ++217, ++218, ++218, ++218, ++218, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++219, ++220, ++220, ++220, ++220, ++221, ++221, ++221, ++221, ++221, ++221, ++221, ++221, ++221, ++221, ++221, ++222, ++222, ++222, ++222, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++223, ++224, ++224, ++224, ++224, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++225, ++226, ++226, ++226, ++226, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++227, ++228, ++228, ++228, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++229, ++230, ++230, ++230, ++230, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++231, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++232, ++233, ++233, ++233, ++233, ++234, ++234, ++234, ++234, ++234, ++234, ++234, ++234, ++234, ++234, ++234, ++235, ++235, ++235, ++235, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++236, ++237, ++237, ++237, ++237, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++238, ++239, ++239, ++239, ++239, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++240, ++241, ++241, ++241, ++241, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++242, ++243, ++243, ++243, ++243, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++244, ++245, ++245, ++245, ++245, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++246, ++247, ++247, ++247, ++247, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++248, ++249, ++249, ++249, ++249, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++250, ++251, ++251, ++251, ++251, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++252, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++253, ++254, ++254, ++254, ++254, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255, ++255 +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0009-omap34xxcam-Add-camera-driver.patch b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0009-omap34xxcam-Add-camera-driver.patch new file mode 100644 index 000000000..22074be14 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/omap3camera/0009-omap34xxcam-Add-camera-driver.patch @@ -0,0 +1,2249 @@ +From 0edf5a50dc0164db5bc71b1a5d1aa8bb1838262c Mon Sep 17 00:00:00 2001 +From: Sakari Ailus +Date: Tue, 10 Mar 2009 10:49:03 +0200 +Subject: [PATCH] omap34xxcam: Add camera driver + +This is the camera driver for the OMAP 3 camera ISP and v4l2-int-device +sensors, lenses and (led) flashes. There are a few connections to OMAP +3 left but after those have been broken this is hardware independent. +Namely, the OMAP 3 ISP must offer a standard interface through +v4l2_subdev (or v4l2-int-device) first. + +This driver has originated from the omap24xxcam camera driver written +specifically for OMAP 2. + +TODO: + +- Convert to use v4l2_subdev instead of v4l2-int-device. + +Signed-off-by: Sakari Ailus +--- + drivers/media/video/Kconfig | 9 + + drivers/media/video/Makefile | 2 + + drivers/media/video/omap34xxcam.c | 1966 +++++++++++++++++++++++++++++++++++++ + drivers/media/video/omap34xxcam.h | 207 ++++ + 4 files changed, 2184 insertions(+), 0 deletions(-) + create mode 100644 drivers/media/video/omap34xxcam.c + create mode 100644 drivers/media/video/omap34xxcam.h + +diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig +index 19cf3b8..3cdb5a4 100644 +--- a/drivers/media/video/Kconfig ++++ b/drivers/media/video/Kconfig +@@ -711,6 +711,15 @@ config VIDEO_CAFE_CCIC + CMOS camera controller. This is the controller found on first- + generation OLPC systems. + ++config VIDEO_OMAP3 ++ tristate "OMAP 3 Camera support" ++ select VIDEOBUF_GEN ++ select VIDEOBUF_DMA_SG ++ select OMAP_IOMMU ++ depends on VIDEO_V4L2 && ARCH_OMAP34XX ++ ---help--- ++ Driver for an OMAP 3 camera controller. ++ + config SOC_CAMERA + tristate "SoC camera support" + depends on VIDEO_V4L2 && HAS_DMA +diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile +index e654270..74a684e 100644 +--- a/drivers/media/video/Makefile ++++ b/drivers/media/video/Makefile +@@ -108,6 +108,8 @@ obj-$(CONFIG_VIDEO_OV7670) += ov7670.o + + obj-y += isp/ + ++obj-$(CONFIG_VIDEO_OMAP3) += omap34xxcam.o ++ + obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o + + obj-$(CONFIG_USB_DABUSB) += dabusb.o +diff --git a/drivers/media/video/omap34xxcam.c b/drivers/media/video/omap34xxcam.c +new file mode 100644 +index 0000000..00fdbf2 +--- /dev/null ++++ b/drivers/media/video/omap34xxcam.c +@@ -0,0 +1,1966 @@ ++/* ++ * omap34xxcam.c ++ * ++ * Copyright (C) 2006--2009 Nokia Corporation ++ * Copyright (C) 2007--2009 Texas Instruments ++ * ++ * Contact: Sakari Ailus ++ * Tuukka Toivonen ++ * ++ * Originally based on the OMAP 2 camera driver. ++ * ++ * Written by Sakari Ailus ++ * Tuukka Toivonen ++ * Sergio Aguirre ++ * Mohit Jalori ++ * Sameer Venkatraman ++ * Leonides Martinez ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA ++ * 02110-1301 USA ++ * ++ */ ++ ++#include ++#include ++#include /* needed for videobufs */ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "omap34xxcam.h" ++#include "isp/isp.h" ++#include "isp/ispmmu.h" ++#include "isp/ispreg.h" ++#include "isp/ispccdc.h" ++#include "isp/isph3a.h" ++#include "isp/isp_af.h" ++#include "isp/isphist.h" ++#include "isp/isppreview.h" ++#include "isp/ispresizer.h" ++ ++#define OMAP34XXCAM_VERSION KERNEL_VERSION(0, 0, 0) ++ ++/* global variables */ ++static struct omap34xxcam_device *omap34xxcam; ++ ++/* ++ * ++ * Sensor handling. ++ * ++ */ ++ ++/** ++ * omap34xxcam_slave_power_set - set slave power state ++ * @vdev: per-video device data structure ++ * @power: new power state ++ */ ++static int omap34xxcam_slave_power_set(struct omap34xxcam_videodev *vdev, ++ enum v4l2_power power, ++ int mask) ++{ ++ int rval = 0, i = 0; ++ ++ BUG_ON(!mutex_is_locked(&vdev->mutex)); ++ ++#ifdef OMAP34XXCAM_POWEROFF_DELAY ++ vdev->power_state_wish = -1; ++#endif ++ ++ for (i = 0; i <= OMAP34XXCAM_SLAVE_FLASH; i++) { ++ if (vdev->slave[i] == v4l2_int_device_dummy()) ++ continue; ++ ++ if (!(mask & (1 << i)) ++ || power == vdev->power_state[i]) ++ continue; ++ ++ rval = vidioc_int_s_power(vdev->slave[i], power); ++ ++ if (rval && power != V4L2_POWER_OFF) { ++ power = V4L2_POWER_OFF; ++ goto out; ++ } ++ ++ vdev->power_state[i] = power; ++ } ++ ++ return 0; ++ ++out: ++ for (i--; i >= 0; i--) { ++ if (vdev->slave[i] == v4l2_int_device_dummy()) ++ continue; ++ ++ if (!(mask & (1 << i))) ++ continue; ++ ++ vidioc_int_s_power(vdev->slave[i], power); ++ vdev->power_state[i] = power; ++ } ++ ++ return rval; ++} ++ ++#ifdef OMAP34XXCAM_POWEROFF_DELAY ++static void omap34xxcam_slave_power_work(struct work_struct *work) ++{ ++ struct omap34xxcam_videodev *vdev = ++ container_of(work, struct omap34xxcam_videodev, poweroff_work); ++ ++ mutex_lock(&vdev->mutex); ++ ++ if (vdev->power_state_wish != -1) ++ omap34xxcam_slave_power_set(vdev, vdev->power_state_wish, ++ vdev->power_state_mask); ++ ++ mutex_unlock(&vdev->mutex); ++} ++ ++static void omap34xxcam_slave_power_timer(unsigned long ptr) ++{ ++ struct omap34xxcam_videodev *vdev = (void *)ptr; ++ ++ schedule_work(&vdev->poweroff_work); ++} ++ ++/** ++ * omap34xxcam_slave_power_suggest - delayed power state change ++ * ++ * @vdev: per-video device data structure ++ * @power: new power state ++ */ ++static void omap34xxcam_slave_power_suggest(struct omap34xxcam_videodev *vdev, ++ enum v4l2_power power, ++ int mask) ++{ ++ BUG_ON(!mutex_is_locked(&vdev->mutex)); ++ ++ del_timer(&vdev->poweroff_timer); ++ ++ vdev->power_state_wish = power; ++ vdev->power_state_mask = mask; ++ ++ mod_timer(&vdev->poweroff_timer, jiffies + OMAP34XXCAM_POWEROFF_DELAY); ++} ++#else /* OMAP34XXCAM_POWEROFF_DELAY */ ++#define omap34xxcam_slave_power_suggest(a, b, c) do {} while (0) ++#endif /* OMAP34XXCAM_POWEROFF_DELAY */ ++ ++/** ++ * omap34xxcam_update_vbq - Updates VBQ with completed input buffer ++ * @vb: ptr. to standard V4L2 video buffer structure ++ * ++ * Updates video buffer queue with completed buffer passed as ++ * input parameter. Also updates ISP H3A timestamp and field count ++ * statistics. ++ */ ++void omap34xxcam_vbq_complete(struct videobuf_buffer *vb, void *priv) ++{ ++ struct omap34xxcam_fh *fh = priv; ++ ++ do_gettimeofday(&vb->ts); ++ vb->field_count = atomic_add_return(2, &fh->field_count); ++ ++ wake_up(&vb->done); ++} ++ ++/** ++ * omap34xxcam_vbq_setup - Calcs size and num of buffs allowed in queue ++ * @vbq: ptr. to standard V4L2 video buffer queue structure ++ * @cnt: ptr to location to hold the count of buffers to be in the queue ++ * @size: ptr to location to hold the size of a frame ++ * ++ * Calculates the number of buffers of current image size that can be ++ * supported by the available capture memory. ++ */ ++static int omap34xxcam_vbq_setup(struct videobuf_queue *vbq, unsigned int *cnt, ++ unsigned int *size) ++{ ++ struct omap34xxcam_fh *fh = vbq->priv_data; ++ struct omap34xxcam_videodev *vdev = fh->vdev; ++ ++ if (*cnt <= 0) ++ *cnt = VIDEO_MAX_FRAME; /* supply a default number of buffers */ ++ ++ if (*cnt > VIDEO_MAX_FRAME) ++ *cnt = VIDEO_MAX_FRAME; ++ ++ *size = vdev->pix.sizeimage; ++ ++ while (*size * *cnt > fh->vdev->vdev_sensor_config.capture_mem) ++ (*cnt)--; ++ ++ return isp_vbq_setup(vbq, cnt, size); ++} ++ ++/** ++ * omap34xxcam_vbq_release - Free resources for input VBQ and VB ++ * @vbq: ptr. to standard V4L2 video buffer queue structure ++ * @vb: ptr to standard V4L2 video buffer structure ++ * ++ * Unmap and free all memory associated with input VBQ and VB, also ++ * unmap the address in ISP MMU. Reset the VB state. ++ */ ++static void omap34xxcam_vbq_release(struct videobuf_queue *vbq, ++ struct videobuf_buffer *vb) ++{ ++ if (!vbq->streaming) { ++ isp_vbq_release(vbq, vb); ++ videobuf_dma_unmap(vbq, videobuf_to_dma(vb)); ++ videobuf_dma_free(videobuf_to_dma(vb)); ++ vb->state = VIDEOBUF_NEEDS_INIT; ++ } ++ return; ++} ++ ++/** ++ * omap34xxcam_vbq_prepare - V4L2 video ops buf_prepare handler ++ * @vbq: ptr. to standard V4L2 video buffer queue structure ++ * @vb: ptr to standard V4L2 video buffer structure ++ * @field: standard V4L2 field enum ++ * ++ * Verifies there is sufficient locked memory for the requested ++ * buffer, or if there is not, allocates, locks and initializes ++ * it. ++ */ ++static int omap34xxcam_vbq_prepare(struct videobuf_queue *vbq, ++ struct videobuf_buffer *vb, ++ enum v4l2_field field) ++{ ++ struct omap34xxcam_fh *fh = vbq->priv_data; ++ struct omap34xxcam_videodev *vdev = fh->vdev; ++ int err = 0; ++ ++ /* ++ * Accessing pix here is okay since it's constant while ++ * streaming is on (and we only get called then). ++ */ ++ if (vb->baddr) { ++ /* This is a userspace buffer. */ ++ if (vdev->pix.sizeimage > vb->bsize) ++ /* The buffer isn't big enough. */ ++ return -EINVAL; ++ } else { ++ if (vb->state != VIDEOBUF_NEEDS_INIT ++ && vdev->pix.sizeimage > vb->bsize) ++ /* ++ * We have a kernel bounce buffer that has ++ * already been allocated. ++ */ ++ omap34xxcam_vbq_release(vbq, vb); ++ } ++ ++ vb->size = vdev->pix.bytesperline * vdev->pix.height; ++ vb->width = vdev->pix.width; ++ vb->height = vdev->pix.height; ++ vb->field = field; ++ ++ if (vb->state == VIDEOBUF_NEEDS_INIT) { ++ err = videobuf_iolock(vbq, vb, NULL); ++ if (!err) { ++ /* isp_addr will be stored locally inside isp code */ ++ err = isp_vbq_prepare(vbq, vb, field); ++ } ++ } ++ ++ if (!err) ++ vb->state = VIDEOBUF_PREPARED; ++ else ++ omap34xxcam_vbq_release(vbq, vb); ++ ++ return err; ++} ++ ++/** ++ * omap34xxcam_vbq_queue - V4L2 video ops buf_queue handler ++ * @vbq: ptr. to standard V4L2 video buffer queue structure ++ * @vb: ptr to standard V4L2 video buffer structure ++ * ++ * Maps the video buffer to sgdma and through the isp, sets ++ * the isp buffer done callback and sets the video buffer state ++ * to active. ++ */ ++static void omap34xxcam_vbq_queue(struct videobuf_queue *vbq, ++ struct videobuf_buffer *vb) ++{ ++ struct omap34xxcam_fh *fh = vbq->priv_data; ++ ++ vb->state = VIDEOBUF_ACTIVE; ++ ++ isp_buf_queue(vb, omap34xxcam_vbq_complete, (void *)fh); ++} ++ ++static struct videobuf_queue_ops omap34xxcam_vbq_ops = { ++ .buf_setup = omap34xxcam_vbq_setup, ++ .buf_prepare = omap34xxcam_vbq_prepare, ++ .buf_queue = omap34xxcam_vbq_queue, ++ .buf_release = omap34xxcam_vbq_release, ++}; ++ ++/* ++ * ++ * IOCTL interface. ++ * ++ */ ++ ++/** ++ * vidioc_querycap - V4L2 query capabilities IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @cap: ptr to standard V4L2 capability structure ++ * ++ * Fill in the V4L2 capabliity structure for the camera device ++ */ ++static int vidioc_querycap(struct file *file, void *fh, ++ struct v4l2_capability *cap) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ ++ strlcpy(cap->driver, CAM_SHORT_NAME, sizeof(cap->driver)); ++ strlcpy(cap->card, vdev->vfd->name, sizeof(cap->card)); ++ cap->version = OMAP34XXCAM_VERSION; ++ if (vdev->vdev_sensor != v4l2_int_device_dummy()) ++ cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; ++ ++ return 0; ++} ++ ++/** ++ * vidioc_enum_fmt_vid_cap - V4L2 enumerate format capabilities IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @f: ptr to standard V4L2 format description structure ++ * ++ * Fills in enumerate format capabilities information for sensor (if SOC ++ * sensor attached) or ISP (if raw sensor attached). ++ */ ++static int vidioc_enum_fmt_vid_cap(struct file *file, void *fh, ++ struct v4l2_fmtdesc *f) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ int rval; ++ ++ if (vdev->vdev_sensor == v4l2_int_device_dummy()) ++ return -EINVAL; ++ ++ if (vdev->vdev_sensor_config.sensor_isp) ++ rval = vidioc_int_enum_fmt_cap(vdev->vdev_sensor, f); ++ else ++ rval = isp_enum_fmt_cap(f); ++ ++ return rval; ++} ++ ++/** ++ * vidioc_g_fmt_vid_cap - V4L2 get format capabilities IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @f: ptr to standard V4L2 format structure ++ * ++ * Fills in format capabilities for sensor (if SOC sensor attached) or ISP ++ * (if raw sensor attached). ++ */ ++static int vidioc_g_fmt_vid_cap(struct file *file, void *fh, ++ struct v4l2_format *f) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ ++ if (vdev->vdev_sensor == v4l2_int_device_dummy()) ++ return -EINVAL; ++ ++ mutex_lock(&vdev->mutex); ++ f->fmt.pix = vdev->pix; ++ mutex_unlock(&vdev->mutex); ++ ++ return 0; ++} ++ ++static int try_pix_parm(struct omap34xxcam_videodev *vdev, ++ struct v4l2_pix_format *best_pix_in, ++ struct v4l2_pix_format *wanted_pix_out, ++ struct v4l2_fract *best_ival) ++{ ++ int fps; ++ int fmtd_index; ++ int rval; ++ struct v4l2_pix_format best_pix_out; ++ ++ if (best_ival->numerator == 0 ++ || best_ival->denominator == 0) ++ *best_ival = vdev->vdev_sensor_config.ival_default; ++ ++ fps = best_ival->denominator / best_ival->numerator; ++ ++ best_ival->denominator = 0; ++ best_pix_out.height = INT_MAX >> 1; ++ best_pix_out.width = best_pix_out.height; ++ ++ for (fmtd_index = 0; ; fmtd_index++) { ++ int size_index; ++ struct v4l2_fmtdesc fmtd; ++ ++ fmtd.index = fmtd_index; ++ fmtd.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; ++ rval = vidioc_int_enum_fmt_cap(vdev->vdev_sensor, &fmtd); ++ if (rval) ++ break; ++ dev_info(&vdev->vfd->dev, "trying fmt %8.8x (%d)\n", ++ fmtd.pixelformat, fmtd_index); ++ /* ++ * Get supported resolutions. ++ */ ++ for (size_index = 0; ; size_index++) { ++ struct v4l2_frmsizeenum frms; ++ struct v4l2_pix_format pix_tmp_in, pix_tmp_out; ++ int ival_index; ++ ++ frms.index = size_index; ++ frms.pixel_format = fmtd.pixelformat; ++ ++ rval = vidioc_int_enum_framesizes(vdev->vdev_sensor, ++ &frms); ++ if (rval) ++ break; ++ ++ pix_tmp_in.pixelformat = frms.pixel_format; ++ pix_tmp_in.width = frms.discrete.width; ++ pix_tmp_in.height = frms.discrete.height; ++ pix_tmp_out = *wanted_pix_out; ++ /* Don't do upscaling. */ ++ if (pix_tmp_out.width > pix_tmp_in.width) ++ pix_tmp_out.width = pix_tmp_in.width; ++ if (pix_tmp_out.height > pix_tmp_in.height) ++ pix_tmp_out.height = pix_tmp_in.height; ++ rval = isp_try_fmt_cap(&pix_tmp_in, &pix_tmp_out); ++ if (rval) ++ return rval; ++ ++ dev_info(&vdev->vfd->dev, "this w %d\th %d\tfmt %8.8x\t" ++ "-> w %d\th %d\t fmt %8.8x" ++ "\twanted w %d\th %d\t fmt %8.8x\n", ++ pix_tmp_in.width, pix_tmp_in.height, ++ pix_tmp_in.pixelformat, ++ pix_tmp_out.width, pix_tmp_out.height, ++ pix_tmp_out.pixelformat, ++ wanted_pix_out->width, wanted_pix_out->height, ++ wanted_pix_out->pixelformat); ++ ++#define IS_SMALLER_OR_EQUAL(pix1, pix2) \ ++ ((pix1)->width + (pix1)->height \ ++ < (pix2)->width + (pix2)->height) ++#define SIZE_DIFF(pix1, pix2) \ ++ (abs((pix1)->width - (pix2)->width) \ ++ + abs((pix1)->height - (pix2)->height)) ++ ++ /* ++ * Don't use modes that are farther from wanted size ++ * that what we already got. ++ */ ++ if (SIZE_DIFF(&pix_tmp_out, wanted_pix_out) ++ > SIZE_DIFF(&best_pix_out, wanted_pix_out)) { ++ dev_info(&vdev->vfd->dev, "size diff bigger: " ++ "w %d\th %d\tw %d\th %d\n", ++ pix_tmp_out.width, pix_tmp_out.height, ++ best_pix_out.width, ++ best_pix_out.height); ++ continue; ++ } ++ ++ /* ++ * There's an input mode that can provide output ++ * closer to wanted. ++ */ ++ if (SIZE_DIFF(&pix_tmp_out, wanted_pix_out) ++ < SIZE_DIFF(&best_pix_out, wanted_pix_out)) { ++ /* Force renegotation of fps etc. */ ++ best_ival->denominator = 0; ++ dev_info(&vdev->vfd->dev, "renegotiate: " ++ "w %d\th %d\tw %d\th %d\n", ++ pix_tmp_out.width, pix_tmp_out.height, ++ best_pix_out.width, ++ best_pix_out.height); ++ } ++ ++ for (ival_index = 0; ; ival_index++) { ++ struct v4l2_frmivalenum frmi; ++ ++ frmi.index = ival_index; ++ frmi.pixel_format = frms.pixel_format; ++ frmi.width = frms.discrete.width; ++ frmi.height = frms.discrete.height; ++ /* FIXME: try to fix standard... */ ++ frmi.reserved[0] = 0xdeafbeef; ++ ++ rval = vidioc_int_enum_frameintervals( ++ vdev->vdev_sensor, &frmi); ++ if (rval) ++ break; ++ ++ dev_info(&vdev->vfd->dev, "fps %d\n", ++ frmi.discrete.denominator ++ / frmi.discrete.numerator); ++ ++ if (best_ival->denominator == 0) ++ goto do_it_now; ++ ++ /* ++ * We aim to use maximum resolution ++ * from the sensor, provided that the ++ * fps is at least as close as on the ++ * current mode. ++ */ ++#define FPS_ABS_DIFF(fps, ival) abs(fps - (ival).denominator / (ival).numerator) ++ ++ /* Select mode with closest fps. */ ++ if (FPS_ABS_DIFF(fps, frmi.discrete) ++ < FPS_ABS_DIFF(fps, *best_ival)) { ++ dev_info(&vdev->vfd->dev, "closer fps: " ++ "fps %d\t fps %d\n", ++ FPS_ABS_DIFF(fps, ++ frmi.discrete), ++ FPS_ABS_DIFF(fps, *best_ival)); ++ goto do_it_now; ++ } ++ ++ /* ++ * Select bigger resolution if it's available ++ * at same fps. ++ */ ++ if (frmi.width + frmi.height ++ > best_pix_in->width + best_pix_in->height ++ && FPS_ABS_DIFF(fps, frmi.discrete) ++ <= FPS_ABS_DIFF(fps, *best_ival)) { ++ dev_info(&vdev->vfd->dev, "bigger res, " ++ "same fps: " ++ "w %d\th %d\tw %d\th %d\n", ++ frmi.width, frmi.height, ++ best_pix_in->width, ++ best_pix_in->height); ++ goto do_it_now; ++ } ++ ++ dev_info(&vdev->vfd->dev, "falling through\n"); ++ ++ continue; ++ ++do_it_now: ++ *best_ival = frmi.discrete; ++ best_pix_out = pix_tmp_out; ++ best_pix_in->width = frmi.width; ++ best_pix_in->height = frmi.height; ++ best_pix_in->pixelformat = frmi.pixel_format; ++ ++ dev_info(&vdev->vfd->dev, ++ "best_pix_in: w %d\th %d\tfmt %8.8x" ++ "\tival %d/%d\n", ++ best_pix_in->width, ++ best_pix_in->height, ++ best_pix_in->pixelformat, ++ best_ival->numerator, ++ best_ival->denominator); ++ } ++ } ++ } ++ ++ if (best_ival->denominator == 0) ++ return -EINVAL; ++ ++ *wanted_pix_out = best_pix_out; ++ ++ dev_info(&vdev->vfd->dev, "w %d, h %d, fmt %8.8x -> w %d, h %d\n", ++ best_pix_in->width, best_pix_in->height, ++ best_pix_in->pixelformat, ++ best_pix_out.width, best_pix_out.height); ++ ++ return isp_try_fmt_cap(best_pix_in, wanted_pix_out); ++} ++ ++static int s_pix_parm(struct omap34xxcam_videodev *vdev, ++ struct v4l2_pix_format *best_pix, ++ struct v4l2_pix_format *pix, ++ struct v4l2_fract *best_ival) ++{ ++ struct v4l2_streamparm a; ++ struct v4l2_format fmt; ++ int rval; ++ ++ rval = try_pix_parm(vdev, best_pix, pix, best_ival); ++ if (rval) ++ return rval; ++ ++ rval = isp_s_fmt_cap(best_pix, pix); ++ if (rval) ++ return rval; ++ ++ fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; ++ fmt.fmt.pix = *best_pix; ++ rval = vidioc_int_s_fmt_cap(vdev->vdev_sensor, &fmt); ++ if (rval) ++ return rval; ++ ++ a.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; ++ a.parm.capture.timeperframe = *best_ival; ++ rval = vidioc_int_s_parm(vdev->vdev_sensor, &a); ++ ++ return rval; ++} ++ ++/** ++ * vidioc_s_fmt_vid_cap - V4L2 set format capabilities IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @f: ptr to standard V4L2 format structure ++ * ++ * Attempts to set input format with the sensor driver (first) and then the ++ * ISP. Returns the return code from vidioc_g_fmt_vid_cap(). ++ */ ++static int vidioc_s_fmt_vid_cap(struct file *file, void *fh, ++ struct v4l2_format *f) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ struct v4l2_pix_format pix_tmp; ++ struct v4l2_fract timeperframe; ++ int rval; ++ ++ if (vdev->vdev_sensor == v4l2_int_device_dummy()) ++ return -EINVAL; ++ ++ mutex_lock(&vdev->mutex); ++ if (vdev->streaming) { ++ rval = -EBUSY; ++ goto out; ++ } ++ ++ vdev->want_pix = f->fmt.pix; ++ ++ timeperframe = vdev->want_timeperframe; ++ ++ rval = s_pix_parm(vdev, &pix_tmp, &f->fmt.pix, &timeperframe); ++ if (!rval) ++ vdev->pix = f->fmt.pix; ++ ++out: ++ mutex_unlock(&vdev->mutex); ++ ++ return rval; ++} ++ ++/** ++ * vidioc_try_fmt_vid_cap - V4L2 try format capabilities IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @f: ptr to standard V4L2 format structure ++ * ++ * Checks if the given format is supported by the sensor driver and ++ * by the ISP. ++ */ ++static int vidioc_try_fmt_vid_cap(struct file *file, void *fh, ++ struct v4l2_format *f) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ struct v4l2_pix_format pix_tmp; ++ struct v4l2_fract timeperframe; ++ int rval; ++ ++ if (vdev->vdev_sensor == v4l2_int_device_dummy()) ++ return -EINVAL; ++ ++ mutex_lock(&vdev->mutex); ++ ++ timeperframe = vdev->want_timeperframe; ++ ++ rval = try_pix_parm(vdev, &pix_tmp, &f->fmt.pix, &timeperframe); ++ ++ mutex_unlock(&vdev->mutex); ++ ++ return rval; ++} ++ ++/** ++ * vidioc_reqbufs - V4L2 request buffers IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @b: ptr to standard V4L2 request buffers structure ++ * ++ * Attempts to get a buffer from the buffer queue associated with the ++ * fh through the video buffer library API. ++ */ ++static int vidioc_reqbufs(struct file *file, void *fh, ++ struct v4l2_requestbuffers *b) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ int rval; ++ ++ if (vdev->vdev_sensor == v4l2_int_device_dummy()) ++ return -EINVAL; ++ ++ mutex_lock(&vdev->mutex); ++ if (vdev->streaming) { ++ mutex_unlock(&vdev->mutex); ++ return -EBUSY; ++ } ++ ++ rval = videobuf_reqbufs(&ofh->vbq, b); ++ ++ mutex_unlock(&vdev->mutex); ++ ++ /* ++ * Either videobuf_reqbufs failed or the buffers are not ++ * memory-mapped (which would need special attention). ++ */ ++ if (rval < 0 || b->memory != V4L2_MEMORY_MMAP) ++ goto out; ++ ++out: ++ return rval; ++} ++ ++/** ++ * vidioc_querybuf - V4L2 query buffer IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @b: ptr to standard V4L2 buffer structure ++ * ++ * Attempts to fill in the v4l2_buffer structure for the buffer queue ++ * associated with the fh through the video buffer library API. ++ */ ++static int vidioc_querybuf(struct file *file, void *fh, struct v4l2_buffer *b) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ ++ return videobuf_querybuf(&ofh->vbq, b); ++} ++ ++/** ++ * vidioc_qbuf - V4L2 queue buffer IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @b: ptr to standard V4L2 buffer structure ++ * ++ * Attempts to queue the v4l2_buffer on the buffer queue ++ * associated with the fh through the video buffer library API. ++ */ ++static int vidioc_qbuf(struct file *file, void *fh, struct v4l2_buffer *b) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ ++ return videobuf_qbuf(&ofh->vbq, b); ++} ++ ++/** ++ * vidioc_dqbuf - V4L2 dequeue buffer IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @b: ptr to standard V4L2 buffer structure ++ * ++ * Attempts to dequeue the v4l2_buffer from the buffer queue ++ * associated with the fh through the video buffer library API. If the ++ * buffer is a user space buffer, then this function will also requeue it, ++ * as user does not expect to do this. ++ */ ++static int vidioc_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ int rval; ++ ++videobuf_dqbuf_again: ++ rval = videobuf_dqbuf(&ofh->vbq, b, file->f_flags & O_NONBLOCK); ++ ++ /* ++ * This is a hack. We don't want to show -EIO to the user ++ * space. Requeue the buffer and try again if we're not doing ++ * this in non-blocking mode. ++ */ ++ if (rval == -EIO) { ++ videobuf_qbuf(&ofh->vbq, b); ++ if (!(file->f_flags & O_NONBLOCK)) ++ goto videobuf_dqbuf_again; ++ /* ++ * We don't have a videobuf_buffer now --- maybe next ++ * time... ++ */ ++ rval = -EAGAIN; ++ } ++ ++ return rval; ++} ++ ++/** ++ * vidioc_streamon - V4L2 streamon IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @i: V4L2 buffer type ++ * ++ * Attempts to start streaming by enabling the sensor interface and turning ++ * on video buffer streaming through the video buffer library API. Upon ++ * success the function returns 0, otherwise an error code is returned. ++ */ ++static int vidioc_streamon(struct file *file, void *fh, enum v4l2_buf_type i) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ int rval; ++ ++ if (vdev->vdev_sensor == v4l2_int_device_dummy()) ++ return -EINVAL; ++ ++ mutex_lock(&vdev->mutex); ++ if (vdev->streaming) { ++ rval = -EBUSY; ++ goto out; ++ } ++ ++ rval = omap34xxcam_slave_power_set(vdev, V4L2_POWER_ON, ++ OMAP34XXCAM_SLAVE_POWER_SENSOR_LENS); ++ if (rval) { ++ dev_dbg(&vdev->vfd->dev, ++ "omap34xxcam_slave_power_set failed\n"); ++ goto out; ++ } ++ ++ rval = videobuf_streamon(&ofh->vbq); ++ if (rval) ++ omap34xxcam_slave_power_set( ++ vdev, V4L2_POWER_OFF, ++ OMAP34XXCAM_SLAVE_POWER_SENSOR_LENS); ++ else ++ vdev->streaming = file; ++ ++out: ++ mutex_unlock(&vdev->mutex); ++ ++ return rval; ++} ++ ++/** ++ * vidioc_streamoff - V4L2 streamoff IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @i: V4L2 buffer type ++ * ++ * Attempts to stop streaming by flushing all scheduled work, waiting on ++ * any queued buffers to complete and then stopping the ISP and turning ++ * off video buffer streaming through the video buffer library API. Upon ++ * success the function returns 0, otherwise an error code is returned. ++ */ ++static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ struct videobuf_queue *q = &ofh->vbq; ++ int rval; ++ ++ mutex_lock(&vdev->mutex); ++ ++ if (vdev->streaming == file) ++ isp_stop(); ++ ++ rval = videobuf_streamoff(q); ++ if (!rval) { ++ vdev->streaming = NULL; ++ ++ omap34xxcam_slave_power_set(vdev, V4L2_POWER_STANDBY, ++ OMAP34XXCAM_SLAVE_POWER_SENSOR); ++ omap34xxcam_slave_power_suggest(vdev, V4L2_POWER_STANDBY, ++ OMAP34XXCAM_SLAVE_POWER_LENS); ++ } ++ ++ mutex_unlock(&vdev->mutex); ++ ++ return rval; ++} ++ ++/** ++ * vidioc_enum_input - V4L2 enumerate input IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @inp: V4L2 input type information structure ++ * ++ * Fills in v4l2_input structure. Returns 0. ++ */ ++static int vidioc_enum_input(struct file *file, void *fh, ++ struct v4l2_input *inp) ++{ ++ if (inp->index > 0) ++ return -EINVAL; ++ ++ strlcpy(inp->name, "camera", sizeof(inp->name)); ++ inp->type = V4L2_INPUT_TYPE_CAMERA; ++ ++ return 0; ++} ++ ++/** ++ * vidioc_g_input - V4L2 get input IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @i: address to hold index of input supported ++ * ++ * Sets index to 0. ++ */ ++static int vidioc_g_input(struct file *file, void *fh, unsigned int *i) ++{ ++ *i = 0; ++ ++ return 0; ++} ++ ++/** ++ * vidioc_s_input - V4L2 set input IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @i: index of input selected ++ * ++ * 0 is only index supported. ++ */ ++static int vidioc_s_input(struct file *file, void *fh, unsigned int i) ++{ ++ if (i > 0) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++/** ++ * vidioc_queryctrl - V4L2 query control IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @a: standard V4L2 query control ioctl structure ++ * ++ * If the requested control is supported, returns the control information ++ * in the v4l2_queryctrl structure. Otherwise, returns -EINVAL if the ++ * control is not supported. If the sensor being used is a "smart sensor", ++ * this request is passed to the sensor driver, otherwise the ISP is ++ * queried and if it does not support the requested control, the request ++ * is forwarded to the "raw" sensor driver to see if it supports it. ++ */ ++static int vidioc_queryctrl(struct file *file, void *fh, ++ struct v4l2_queryctrl *a) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ struct v4l2_queryctrl a_tmp; ++ int best_slave = -1; ++ u32 best_ctrl = (u32)-1; ++ int i; ++ ++ if (vdev->vdev_sensor_config.sensor_isp) ++ return vidioc_int_queryctrl(vdev->vdev_sensor, a); ++ ++ /* No next flags: try slaves directly. */ ++ if (!(a->id & V4L2_CTRL_FLAG_NEXT_CTRL)) { ++ for (i = 0; i <= OMAP34XXCAM_SLAVE_FLASH; i++) { ++ if (!vidioc_int_queryctrl(vdev->slave[i], a)) ++ return 0; ++ } ++ return isp_queryctrl(a); ++ } ++ ++ /* Find slave with smallest next control id. */ ++ for (i = 0; i <= OMAP34XXCAM_SLAVE_FLASH; i++) { ++ a_tmp = *a; ++ ++ if (vidioc_int_queryctrl(vdev->slave[i], &a_tmp)) ++ continue; ++ ++ if (a_tmp.id < best_ctrl) { ++ best_slave = i; ++ best_ctrl = a_tmp.id; ++ } ++ } ++ ++ a_tmp = *a; ++ if (!isp_queryctrl(&a_tmp)) { ++ if (a_tmp.id < best_ctrl) { ++ *a = a_tmp; ++ ++ return 0; ++ } ++ } ++ ++ if (best_slave == -1) ++ return -EINVAL; ++ ++ a->id = best_ctrl; ++ return vidioc_int_queryctrl(vdev->slave[best_slave], a); ++} ++ ++/** ++ * vidioc_querymenu - V4L2 query menu IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @a: standard V4L2 query menu ioctl structure ++ * ++ * If the requested control is supported, returns the menu information ++ * in the v4l2_querymenu structure. Otherwise, returns -EINVAL if the ++ * control is not supported or is not a menu. If the sensor being used ++ * is a "smart sensor", this request is passed to the sensor driver, ++ * otherwise the ISP is queried and if it does not support the requested ++ * menu control, the request is forwarded to the "raw" sensor driver to ++ * see if it supports it. ++ */ ++static int vidioc_querymenu(struct file *file, void *fh, ++ struct v4l2_querymenu *a) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ int i; ++ ++ if (vdev->vdev_sensor_config.sensor_isp) ++ return vidioc_int_querymenu(vdev->vdev_sensor, a); ++ ++ /* Try slaves directly. */ ++ for (i = 0; i <= OMAP34XXCAM_SLAVE_FLASH; i++) { ++ if (!vidioc_int_querymenu(vdev->slave[i], a)) ++ return 0; ++ } ++ return isp_querymenu(a); ++} ++ ++static int vidioc_g_ext_ctrls(struct file *file, void *fh, ++ struct v4l2_ext_controls *a) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ int i, ctrl_idx, rval = 0; ++ ++ mutex_lock(&vdev->mutex); ++ ++ for (ctrl_idx = 0; ctrl_idx < a->count; ctrl_idx++) { ++ struct v4l2_control ctrl; ++ ++ ctrl.id = a->controls[ctrl_idx].id; ++ ++ if (vdev->vdev_sensor_config.sensor_isp) { ++ rval = vidioc_int_g_ctrl(vdev->vdev_sensor, &ctrl); ++ } else { ++ for (i = 0; i <= OMAP34XXCAM_SLAVE_FLASH; i++) { ++ rval = vidioc_int_g_ctrl(vdev->slave[i], &ctrl); ++ if (!rval) ++ break; ++ } ++ } ++ ++ if (rval) ++ rval = isp_g_ctrl(&ctrl); ++ ++ if (rval) { ++ a->error_idx = ctrl_idx; ++ break; ++ } ++ ++ a->controls[ctrl_idx].value = ctrl.value; ++ } ++ ++ mutex_unlock(&vdev->mutex); ++ ++ return rval; ++} ++ ++static int vidioc_s_ext_ctrls(struct file *file, void *fh, ++ struct v4l2_ext_controls *a) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ int i, ctrl_idx, rval = 0; ++ ++ mutex_lock(&vdev->mutex); ++ ++ for (ctrl_idx = 0; ctrl_idx < a->count; ctrl_idx++) { ++ struct v4l2_control ctrl; ++ ++ ctrl.id = a->controls[ctrl_idx].id; ++ ctrl.value = a->controls[ctrl_idx].value; ++ ++ if (vdev->vdev_sensor_config.sensor_isp) { ++ rval = vidioc_int_s_ctrl(vdev->vdev_sensor, &ctrl); ++ } else { ++ for (i = 0; i <= OMAP34XXCAM_SLAVE_FLASH; i++) { ++ rval = vidioc_int_s_ctrl(vdev->slave[i], &ctrl); ++ if (!rval) ++ break; ++ } ++ } ++ ++ if (rval) ++ rval = isp_s_ctrl(&ctrl); ++ ++ if (rval) { ++ a->error_idx = ctrl_idx; ++ break; ++ } ++ ++ a->controls[ctrl_idx].value = ctrl.value; ++ } ++ ++ mutex_unlock(&vdev->mutex); ++ ++ return rval; ++} ++ ++/** ++ * vidioc_g_parm - V4L2 get parameters IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @a: standard V4L2 stream parameters structure ++ * ++ * If request is for video capture buffer type, handles request by ++ * forwarding to sensor driver. ++ */ ++static int vidioc_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ int rval; ++ ++ if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) ++ return -EINVAL; ++ ++ mutex_lock(&vdev->mutex); ++ rval = vidioc_int_g_parm(vdev->vdev_sensor, a); ++ mutex_unlock(&vdev->mutex); ++ ++ return rval; ++} ++ ++/** ++ * vidioc_s_parm - V4L2 set parameters IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @a: standard V4L2 stream parameters structure ++ * ++ * If request is for video capture buffer type, handles request by ++ * first getting current stream parameters from sensor, then forwarding ++ * request to set new parameters to sensor driver. It then attempts to ++ * enable the sensor interface with the new parameters. If this fails, it ++ * reverts back to the previous parameters. ++ */ ++static int vidioc_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ struct v4l2_pix_format pix_tmp_sensor, pix_tmp; ++ int rval; ++ ++ if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) ++ return -EINVAL; ++ ++ if (vdev->vdev_sensor == v4l2_int_device_dummy()) ++ return -EINVAL; ++ ++ mutex_lock(&vdev->mutex); ++ if (vdev->streaming) { ++ rval = -EBUSY; ++ goto out; ++ } ++ ++ vdev->want_timeperframe = a->parm.capture.timeperframe; ++ ++ pix_tmp = vdev->want_pix; ++ ++ rval = s_pix_parm(vdev, &pix_tmp_sensor, &pix_tmp, ++ &a->parm.capture.timeperframe); ++ ++out: ++ mutex_unlock(&vdev->mutex); ++ ++ return rval; ++} ++ ++/** ++ * vidioc_cropcap - V4L2 crop capture IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @a: standard V4L2 crop capture structure ++ * ++ * If using a "smart" sensor, just forwards request to the sensor driver, ++ * otherwise fills in the v4l2_cropcap values locally. ++ */ ++static int vidioc_cropcap(struct file *file, void *fh, struct v4l2_cropcap *a) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ struct v4l2_cropcap *cropcap = a; ++ int rval; ++ ++ if (vdev->vdev_sensor == v4l2_int_device_dummy()) ++ return -EINVAL; ++ ++ mutex_lock(&vdev->mutex); ++ ++ rval = vidioc_int_cropcap(vdev->vdev_sensor, a); ++ ++ if (rval && !vdev->vdev_sensor_config.sensor_isp) { ++ struct v4l2_format f; ++ ++ /* cropcap failed, try to do this via g_fmt_cap */ ++ rval = vidioc_int_g_fmt_cap(vdev->vdev_sensor, &f); ++ if (!rval) { ++ cropcap->bounds.top = 0; ++ cropcap->bounds.left = 0; ++ cropcap->bounds.width = f.fmt.pix.width; ++ cropcap->bounds.height = f.fmt.pix.height; ++ cropcap->defrect = cropcap->bounds; ++ cropcap->pixelaspect.numerator = 1; ++ cropcap->pixelaspect.denominator = 1; ++ } ++ } ++ ++ mutex_unlock(&vdev->mutex); ++ ++ return rval; ++} ++ ++/** ++ * vidioc_g_crop - V4L2 get capture crop IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @a: standard V4L2 crop structure ++ * ++ * If using a "smart" sensor, just forwards request to the sensor driver, ++ * otherwise calls the isp functions to fill in current crop values. ++ */ ++static int vidioc_g_crop(struct file *file, void *fh, struct v4l2_crop *a) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ int rval = 0; ++ ++ if (vdev->vdev_sensor == v4l2_int_device_dummy()) ++ return -EINVAL; ++ ++ mutex_lock(&vdev->mutex); ++ ++ if (vdev->vdev_sensor_config.sensor_isp) ++ rval = vidioc_int_g_crop(vdev->vdev_sensor, a); ++ else ++ rval = isp_g_crop(a); ++ ++ mutex_unlock(&vdev->mutex); ++ ++ return rval; ++} ++ ++/** ++ * vidioc_s_crop - V4L2 set capture crop IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @a: standard V4L2 crop structure ++ * ++ * If using a "smart" sensor, just forwards request to the sensor driver, ++ * otherwise calls the isp functions to set the current crop values. ++ */ ++static int vidioc_s_crop(struct file *file, void *fh, struct v4l2_crop *a) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ int rval = 0; ++ ++ if (vdev->vdev_sensor == v4l2_int_device_dummy()) ++ return -EINVAL; ++ ++ mutex_lock(&vdev->mutex); ++ ++ if (vdev->vdev_sensor_config.sensor_isp) ++ rval = vidioc_int_s_crop(vdev->vdev_sensor, a); ++ else ++ rval = isp_s_crop(a, &vdev->pix); ++ ++ mutex_unlock(&vdev->mutex); ++ ++ return rval; ++} ++ ++static int vidioc_enum_framesizes(struct file *file, void *fh, ++ struct v4l2_frmsizeenum *frms) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ u32 pixel_format; ++ int rval; ++ ++ mutex_lock(&vdev->mutex); ++ ++ if (vdev->vdev_sensor_config.sensor_isp) { ++ rval = vidioc_int_enum_framesizes(vdev->vdev_sensor, frms); ++ } else { ++ pixel_format = frms->pixel_format; ++ frms->pixel_format = -1; /* ISP does format conversion */ ++ rval = vidioc_int_enum_framesizes(vdev->vdev_sensor, frms); ++ frms->pixel_format = pixel_format; ++ } ++ ++ mutex_unlock(&vdev->mutex); ++ return rval; ++} ++ ++static int vidioc_enum_frameintervals(struct file *file, void *fh, ++ struct v4l2_frmivalenum *frmi) ++{ ++ struct omap34xxcam_fh *ofh = fh; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ u32 pixel_format; ++ int rval; ++ ++ mutex_lock(&vdev->mutex); ++ ++ if (vdev->vdev_sensor_config.sensor_isp) { ++ rval = vidioc_int_enum_frameintervals(vdev->vdev_sensor, frmi); ++ } else { ++ pixel_format = frmi->pixel_format; ++ frmi->pixel_format = -1; /* ISP does format conversion */ ++ rval = vidioc_int_enum_frameintervals(vdev->vdev_sensor, frmi); ++ frmi->pixel_format = pixel_format; ++ } ++ ++ mutex_unlock(&vdev->mutex); ++ return rval; ++} ++ ++/** ++ * vidioc_default - private IOCTL handler ++ * @file: ptr. to system file structure ++ * @fh: ptr to hold address of omap34xxcam_fh struct (per-filehandle data) ++ * @cmd: ioctl cmd value ++ * @arg: ioctl arg value ++ * ++ * If the sensor being used is a "smart sensor", this request is returned to ++ * caller with -EINVAL err code. Otherwise if the control id is the private ++ * VIDIOC_PRIVATE_ISP_AEWB_REQ to update the analog gain or exposure, ++ * then this request is forwared directly to the sensor to incorporate the ++ * feedback. The request is then passed on to the ISP private IOCTL handler, ++ * isp_handle_private() ++ */ ++static long vidioc_default(struct file *file, void *fh, int cmd, void *arg) ++{ ++ struct omap34xxcam_fh *ofh = file->private_data; ++ struct omap34xxcam_videodev *vdev = ofh->vdev; ++ int rval; ++ ++ if (vdev->vdev_sensor_config.sensor_isp) { ++ rval = -EINVAL; ++ } else { ++ switch (cmd) { ++ case VIDIOC_PRIVATE_ISP_AEWB_REQ: ++ { ++ /* Need to update sensor first */ ++ struct isph3a_aewb_data *data; ++ struct v4l2_control vc; ++ ++ data = (struct isph3a_aewb_data *) arg; ++ if (data->update & SET_EXPOSURE) { ++ dev_info(&vdev->vfd->dev, "using " ++ "VIDIOC_PRIVATE_ISP_AEWB_REQ to set " ++ "exposure is deprecated!\n"); ++ vc.id = V4L2_CID_EXPOSURE; ++ vc.value = data->shutter; ++ mutex_lock(&vdev->mutex); ++ rval = vidioc_int_s_ctrl(vdev->vdev_sensor, ++ &vc); ++ mutex_unlock(&vdev->mutex); ++ if (rval) ++ goto out; ++ } ++ if (data->update & SET_ANALOG_GAIN) { ++ dev_info(&vdev->vfd->dev, "using " ++ "VIDIOC_PRIVATE_ISP_AEWB_REQ to set " ++ "gain is deprecated!\n"); ++ vc.id = V4L2_CID_GAIN; ++ vc.value = data->gain; ++ mutex_lock(&vdev->mutex); ++ rval = vidioc_int_s_ctrl(vdev->vdev_sensor, ++ &vc); ++ mutex_unlock(&vdev->mutex); ++ if (rval) ++ goto out; ++ } ++ } ++ break; ++ case VIDIOC_PRIVATE_ISP_AF_REQ: { ++ /* Need to update lens first */ ++ struct isp_af_data *data; ++ struct v4l2_control vc; ++ ++ if (!vdev->vdev_lens) { ++ rval = -EINVAL; ++ goto out; ++ } ++ data = (struct isp_af_data *) arg; ++ if (data->update & LENS_DESIRED_POSITION) { ++ dev_info(&vdev->vfd->dev, "using " ++ "VIDIOC_PRIVATE_ISP_AF_REQ to set " ++ "lens position is deprecated!\n"); ++ vc.id = V4L2_CID_FOCUS_ABSOLUTE; ++ vc.value = data->desired_lens_direction; ++ mutex_lock(&vdev->mutex); ++ rval = vidioc_int_s_ctrl(vdev->vdev_lens, &vc); ++ mutex_unlock(&vdev->mutex); ++ if (rval) ++ goto out; ++ } ++ } ++ break; ++ } ++ ++ mutex_lock(&vdev->mutex); ++ rval = isp_handle_private(cmd, arg); ++ mutex_unlock(&vdev->mutex); ++ } ++out: ++ return rval; ++} ++ ++/* ++ * ++ * File operations. ++ * ++ */ ++ ++/** ++ * omap34xxcam_poll - file operations poll handler ++ * @file: ptr. to system file structure ++ * @wait: system poll table structure ++ * ++ */ ++static unsigned int omap34xxcam_poll(struct file *file, ++ struct poll_table_struct *wait) ++{ ++ struct omap34xxcam_fh *fh = file->private_data; ++ struct omap34xxcam_videodev *vdev = fh->vdev; ++ struct videobuf_buffer *vb; ++ ++ mutex_lock(&vdev->mutex); ++ if (vdev->streaming != file) { ++ mutex_unlock(&vdev->mutex); ++ return POLLERR; ++ } ++ mutex_unlock(&vdev->mutex); ++ ++ mutex_lock(&fh->vbq.vb_lock); ++ if (list_empty(&fh->vbq.stream)) { ++ mutex_unlock(&fh->vbq.vb_lock); ++ return POLLERR; ++ } ++ vb = list_entry(fh->vbq.stream.next, struct videobuf_buffer, stream); ++ mutex_unlock(&fh->vbq.vb_lock); ++ ++ poll_wait(file, &vb->done, wait); ++ ++ if (vb->state == VIDEOBUF_DONE || vb->state == VIDEOBUF_ERROR) ++ return POLLIN | POLLRDNORM; ++ ++ return 0; ++} ++ ++/** ++ * omap34xxcam_mmap - file operations mmap handler ++ * @file: ptr. to system file structure ++ * @vma: system virt. mem. area structure ++ * ++ * Maps a virtual memory area via the video buffer API ++ */ ++static int omap34xxcam_mmap(struct file *file, struct vm_area_struct *vma) ++{ ++ struct omap34xxcam_fh *fh = file->private_data; ++ return videobuf_mmap_mapper(&fh->vbq, vma); ++} ++ ++/** ++ * omap34xxcam_open - file operations open handler ++ * @inode: ptr. to system inode structure ++ * @file: ptr. to system file structure ++ * ++ * Allocates and initializes the per-filehandle data (omap34xxcam_fh), ++ * enables the sensor, opens/initializes the ISP interface and the ++ * video buffer queue. Note that this function will allow multiple ++ * file handles to be open simultaneously, however only the first ++ * handle opened will initialize the ISP. It is the application ++ * responsibility to only use one handle for streaming and the others ++ * for control only. ++ * This function returns 0 upon success and -ENODEV upon error. ++ */ ++static int omap34xxcam_open(struct file *file) ++{ ++ int rval = 0; ++ struct omap34xxcam_videodev *vdev = NULL; ++ struct omap34xxcam_device *cam = omap34xxcam; ++ struct omap34xxcam_fh *fh; ++ struct v4l2_format format; ++ int i; ++ ++ for (i = 0; i < OMAP34XXCAM_VIDEODEVS; i++) { ++ if (cam->vdevs[i].vfd ++ && cam->vdevs[i].vfd->minor == ++ iminor(file->f_dentry->d_inode)) { ++ vdev = &cam->vdevs[i]; ++ break; ++ } ++ } ++ ++ if (!vdev || !vdev->vfd) ++ return -ENODEV; ++ ++ fh = kzalloc(sizeof(*fh), GFP_KERNEL); ++ if (fh == NULL) ++ return -ENOMEM; ++ ++ mutex_lock(&vdev->mutex); ++ for (i = 0; i <= OMAP34XXCAM_SLAVE_FLASH; i++) { ++ if (vdev->slave[i] != v4l2_int_device_dummy() ++ && !try_module_get(vdev->slave[i]->module)) { ++ mutex_unlock(&vdev->mutex); ++ dev_err(&vdev->vfd->dev, "can't try_module_get %s\n", ++ vdev->slave[i]->name); ++ rval = -ENODEV; ++ goto out_try_module_get; ++ } ++ } ++ ++ if (atomic_inc_return(&vdev->users) == 1) { ++ rval = isp_get(); ++ if (rval < 0) { ++ dev_err(&vdev->vfd->dev, "can't get isp\n"); ++ goto out_isp_get; ++ } ++ if (omap34xxcam_slave_power_set(vdev, V4L2_POWER_ON, ++ OMAP34XXCAM_SLAVE_POWER_ALL)) { ++ dev_err(&vdev->vfd->dev, "can't power up slaves\n"); ++ rval = -EBUSY; ++ goto out_slave_power_set_standby; ++ } ++ omap34xxcam_slave_power_set( ++ vdev, V4L2_POWER_STANDBY, ++ OMAP34XXCAM_SLAVE_POWER_SENSOR); ++ omap34xxcam_slave_power_suggest( ++ vdev, V4L2_POWER_STANDBY, ++ OMAP34XXCAM_SLAVE_POWER_LENS); ++ } ++ ++ fh->vdev = vdev; ++ ++ if (!vdev->pix.width ++ && vdev->vdev_sensor != v4l2_int_device_dummy()) { ++ memset(&format, 0, sizeof(format)); ++ if (vidioc_int_g_fmt_cap(vdev->vdev_sensor, &format)) { ++ dev_err(&vdev->vfd->dev, ++ "can't get current pix from sensor!\n"); ++ goto out_vidioc_int_g_fmt_cap; ++ } ++ if (!vdev->vdev_sensor_config.sensor_isp) { ++ struct v4l2_pix_format pix = format.fmt.pix; ++ if (isp_s_fmt_cap(&pix, &format.fmt.pix)) { ++ dev_err(&vdev->vfd->dev, ++ "isp doesn't like the sensor!\n"); ++ goto out_isp_s_fmt_cap; ++ } ++ } ++ vdev->pix = format.fmt.pix; ++ } ++ ++ mutex_unlock(&vdev->mutex); ++ ++ file->private_data = fh; ++ ++ spin_lock_init(&fh->vbq_lock); ++ ++ videobuf_queue_sg_init(&fh->vbq, &omap34xxcam_vbq_ops, NULL, ++ &fh->vbq_lock, V4L2_BUF_TYPE_VIDEO_CAPTURE, ++ V4L2_FIELD_NONE, ++ sizeof(struct videobuf_buffer), fh); ++ ++ return 0; ++ ++out_isp_s_fmt_cap: ++out_vidioc_int_g_fmt_cap: ++ omap34xxcam_slave_power_set(vdev, V4L2_POWER_OFF, ++ OMAP34XXCAM_SLAVE_POWER_ALL); ++out_slave_power_set_standby: ++ isp_put(); ++ ++out_isp_get: ++ atomic_dec(&vdev->users); ++ mutex_unlock(&vdev->mutex); ++ ++out_try_module_get: ++ for (i--; i >= 0; i--) ++ if (vdev->slave[i] != v4l2_int_device_dummy()) ++ module_put(vdev->slave[i]->module); ++ ++ kfree(fh); ++ ++ return rval; ++} ++ ++/** ++ * omap34xxcam_release - file operations release handler ++ * @inode: ptr. to system inode structure ++ * @file: ptr. to system file structure ++ * ++ * Complement of omap34xxcam_open. This function will flush any scheduled ++ * work, disable the sensor, close the ISP interface, stop the ++ * video buffer queue from streaming and free the per-filehandle data ++ * (omap34xxcam_fh). Note that because multiple open file handles ++ * are allowed, this function will only close the ISP and disable the ++ * sensor when the last open file handle (by count) is closed. ++ * This function returns 0. ++ */ ++static int omap34xxcam_release(struct file *file) ++{ ++ struct omap34xxcam_fh *fh = file->private_data; ++ struct omap34xxcam_videodev *vdev = fh->vdev; ++ int i; ++ ++ mutex_lock(&vdev->mutex); ++ if (vdev->streaming == file) { ++ isp_stop(); ++ videobuf_streamoff(&fh->vbq); ++ omap34xxcam_slave_power_set( ++ vdev, V4L2_POWER_STANDBY, ++ OMAP34XXCAM_SLAVE_POWER_SENSOR); ++ omap34xxcam_slave_power_suggest( ++ vdev, V4L2_POWER_STANDBY, ++ OMAP34XXCAM_SLAVE_POWER_LENS); ++ vdev->streaming = NULL; ++ } ++ ++ if (atomic_dec_return(&vdev->users) == 0) { ++ omap34xxcam_slave_power_set(vdev, V4L2_POWER_OFF, ++ OMAP34XXCAM_SLAVE_POWER_ALL); ++ isp_put(); ++ } ++ mutex_unlock(&vdev->mutex); ++ ++ file->private_data = NULL; ++ ++ for (i = 0; i <= OMAP34XXCAM_SLAVE_FLASH; i++) ++ if (vdev->slave[i] != v4l2_int_device_dummy()) ++ module_put(vdev->slave[i]->module); ++ ++ kfree(fh); ++ ++ return 0; ++} ++ ++static struct v4l2_file_operations omap34xxcam_fops = { ++ .owner = THIS_MODULE, ++ .unlocked_ioctl = video_ioctl2, ++ .poll = omap34xxcam_poll, ++ .mmap = omap34xxcam_mmap, ++ .open = omap34xxcam_open, ++ .release = omap34xxcam_release, ++}; ++ ++static void omap34xxcam_vfd_name_update(struct omap34xxcam_videodev *vdev) ++{ ++ struct video_device *vfd = vdev->vfd; ++ int i; ++ ++ strlcpy(vfd->name, CAM_SHORT_NAME, sizeof(vfd->name)); ++ for (i = 0; i <= OMAP34XXCAM_SLAVE_FLASH; i++) { ++ strlcat(vfd->name, "/", sizeof(vfd->name)); ++ if (vdev->slave[i] == v4l2_int_device_dummy()) ++ continue; ++ strlcat(vfd->name, vdev->slave[i]->name, sizeof(vfd->name)); ++ } ++ dev_info(&vdev->vfd->dev, "video%d is now %s\n", vfd->num, vfd->name); ++} ++ ++/** ++ * omap34xxcam_device_unregister - V4L2 detach handler ++ * @s: ptr. to standard V4L2 device information structure ++ * ++ * Detach sensor and unregister and release the video device. ++ */ ++static void omap34xxcam_device_unregister(struct v4l2_int_device *s) ++{ ++ struct omap34xxcam_videodev *vdev = s->u.slave->master->priv; ++ struct omap34xxcam_hw_config hwc; ++ ++ BUG_ON(vidioc_int_g_priv(s, &hwc) < 0); ++ ++ mutex_lock(&vdev->mutex); ++ ++ if (vdev->slave[hwc.dev_type] != v4l2_int_device_dummy()) { ++ vdev->slave[hwc.dev_type] = v4l2_int_device_dummy(); ++ vdev->slaves--; ++ omap34xxcam_vfd_name_update(vdev); ++ } ++ ++ if (vdev->slaves == 0 && vdev->vfd) { ++ if (vdev->vfd->minor == -1) { ++ /* ++ * The device was never registered, so release the ++ * video_device struct directly. ++ */ ++ video_device_release(vdev->vfd); ++ } else { ++ /* ++ * The unregister function will release the ++ * video_device struct as well as ++ * unregistering it. ++ */ ++ video_unregister_device(vdev->vfd); ++ } ++ vdev->vfd = NULL; ++ } ++ ++ mutex_unlock(&vdev->mutex); ++} ++ ++static const struct v4l2_ioctl_ops omap34xxcam_ioctl_ops = { ++ .vidioc_querycap = vidioc_querycap, ++ .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, ++ .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, ++ .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, ++ .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, ++ .vidioc_reqbufs = vidioc_reqbufs, ++ .vidioc_querybuf = vidioc_querybuf, ++ .vidioc_qbuf = vidioc_qbuf, ++ .vidioc_dqbuf = vidioc_dqbuf, ++ .vidioc_streamon = vidioc_streamon, ++ .vidioc_streamoff = vidioc_streamoff, ++ .vidioc_enum_input = vidioc_enum_input, ++ .vidioc_g_input = vidioc_g_input, ++ .vidioc_s_input = vidioc_s_input, ++ .vidioc_queryctrl = vidioc_queryctrl, ++ .vidioc_querymenu = vidioc_querymenu, ++ .vidioc_g_ext_ctrls = vidioc_g_ext_ctrls, ++ .vidioc_s_ext_ctrls = vidioc_s_ext_ctrls, ++ .vidioc_g_parm = vidioc_g_parm, ++ .vidioc_s_parm = vidioc_s_parm, ++ .vidioc_cropcap = vidioc_cropcap, ++ .vidioc_g_crop = vidioc_g_crop, ++ .vidioc_s_crop = vidioc_s_crop, ++ .vidioc_enum_framesizes = vidioc_enum_framesizes, ++ .vidioc_enum_frameintervals = vidioc_enum_frameintervals, ++ .vidioc_default = vidioc_default, ++}; ++ ++/** ++ * omap34xxcam_device_register - V4L2 attach handler ++ * @s: ptr. to standard V4L2 device information structure ++ * ++ * Allocates and initializes the V4L2 video_device structure, initializes ++ * the sensor, and finally ++ registers the device with V4L2 based on the ++ * video_device structure. ++ * ++ * Returns 0 on success, otherwise an appropriate error code on ++ * failure. ++ */ ++static int omap34xxcam_device_register(struct v4l2_int_device *s) ++{ ++ struct omap34xxcam_videodev *vdev = s->u.slave->master->priv; ++ struct omap34xxcam_hw_config hwc; ++ int rval; ++ ++ /* We need to check rval just once. The place is here. */ ++ if (vidioc_int_g_priv(s, &hwc)) ++ return -ENODEV; ++ ++ if (vdev->index != hwc.dev_index) ++ return -ENODEV; ++ ++ if (hwc.dev_type < 0 || hwc.dev_type > OMAP34XXCAM_SLAVE_FLASH) ++ return -EINVAL; ++ ++ if (vdev->slave[hwc.dev_type] != v4l2_int_device_dummy()) ++ return -EBUSY; ++ ++ mutex_lock(&vdev->mutex); ++ if (atomic_read(&vdev->users)) { ++ printk(KERN_ERR "%s: we're open (%d), can't register\n", ++ __func__, atomic_read(&vdev->users)); ++ mutex_unlock(&vdev->mutex); ++ return -EBUSY; ++ } ++ ++ vdev->slaves++; ++ vdev->slave[hwc.dev_type] = s; ++ vdev->slave_config[hwc.dev_type] = hwc; ++ ++ if (hwc.dev_type == OMAP34XXCAM_SLAVE_SENSOR) { ++ rval = isp_get(); ++ if (rval < 0) { ++ printk(KERN_ERR "%s: can't get ISP, " ++ "sensor init failed\n", __func__); ++ goto err; ++ } ++ } ++ rval = omap34xxcam_slave_power_set(vdev, V4L2_POWER_ON, ++ 1 << hwc.dev_type); ++ if (rval) ++ goto err_omap34xxcam_slave_power_set; ++ if (hwc.dev_type == OMAP34XXCAM_SLAVE_SENSOR) { ++ struct v4l2_format format; ++ ++ format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; ++ rval = vidioc_int_g_fmt_cap(vdev->vdev_sensor, &format); ++ if (rval) ++ rval = -EBUSY; ++ ++ vdev->want_pix = format.fmt.pix; ++ } ++ omap34xxcam_slave_power_set(vdev, V4L2_POWER_OFF, 1 << hwc.dev_type); ++ if (hwc.dev_type == OMAP34XXCAM_SLAVE_SENSOR) ++ isp_put(); ++ ++ if (rval) ++ goto err; ++ ++ /* Are we the first slave? */ ++ if (vdev->slaves == 1) { ++ /* initialize the video_device struct */ ++ vdev->vfd = video_device_alloc(); ++ if (!vdev->vfd) { ++ printk(KERN_ERR "%s: could not allocate " ++ "video device struct\n", __func__); ++ rval = -ENOMEM; ++ goto err; ++ } ++ vdev->vfd->release = video_device_release; ++ vdev->vfd->minor = -1; ++ vdev->vfd->fops = &omap34xxcam_fops; ++ vdev->vfd->ioctl_ops = &omap34xxcam_ioctl_ops; ++ video_set_drvdata(vdev->vfd, vdev); ++ ++ if (video_register_device(vdev->vfd, VFL_TYPE_GRABBER, ++ hwc.dev_minor) < 0) { ++ printk(KERN_ERR "%s: could not register V4L device\n", ++ __func__); ++ vdev->vfd->minor = -1; ++ rval = -EBUSY; ++ goto err; ++ } ++ } ++ ++ omap34xxcam_vfd_name_update(vdev); ++ ++ mutex_unlock(&vdev->mutex); ++ ++ return 0; ++ ++err_omap34xxcam_slave_power_set: ++ if (hwc.dev_type == OMAP34XXCAM_SLAVE_SENSOR) ++ isp_put(); ++ ++err: ++ if (s == vdev->slave[hwc.dev_type]) { ++ vdev->slave[hwc.dev_type] = v4l2_int_device_dummy(); ++ vdev->slaves--; ++ } ++ ++ mutex_unlock(&vdev->mutex); ++ omap34xxcam_device_unregister(s); ++ ++ return rval; ++} ++ ++static struct v4l2_int_master omap34xxcam_master = { ++ .attach = omap34xxcam_device_register, ++ .detach = omap34xxcam_device_unregister, ++}; ++ ++/* ++ * ++ * Module initialisation and deinitialisation ++ * ++ */ ++ ++static void omap34xxcam_exit(void) ++{ ++ struct omap34xxcam_device *cam = omap34xxcam; ++ int i; ++ ++ if (!cam) ++ return; ++ ++ for (i = 0; i < OMAP34XXCAM_VIDEODEVS; i++) { ++ if (cam->vdevs[i].cam == NULL) ++ continue; ++ ++ v4l2_int_device_unregister(&cam->vdevs[i].master); ++ cam->vdevs[i].cam = NULL; ++ } ++ ++ omap34xxcam = NULL; ++ ++ kfree(cam); ++} ++ ++static int __init omap34xxcam_init(void) ++{ ++ struct omap34xxcam_device *cam; ++ int i; ++ ++ cam = kzalloc(sizeof(*cam), GFP_KERNEL); ++ if (!cam) { ++ printk(KERN_ERR "%s: could not allocate memory\n", __func__); ++ return -ENOMEM; ++ } ++ ++ omap34xxcam = cam; ++ ++ for (i = 0; i < OMAP34XXCAM_VIDEODEVS; i++) { ++ struct omap34xxcam_videodev *vdev = &cam->vdevs[i]; ++ struct v4l2_int_device *m = &vdev->master; ++ ++ m->module = THIS_MODULE; ++ strlcpy(m->name, CAM_NAME, sizeof(m->name)); ++ m->type = v4l2_int_type_master; ++ m->u.master = &omap34xxcam_master; ++ m->priv = vdev; ++ ++ mutex_init(&vdev->mutex); ++ vdev->index = i; ++ vdev->cam = cam; ++ vdev->vdev_sensor = ++ vdev->vdev_lens = ++ vdev->vdev_flash = v4l2_int_device_dummy(); ++#ifdef OMAP34XXCAM_POWEROFF_DELAY ++ setup_timer(&vdev->poweroff_timer, ++ omap34xxcam_slave_power_timer, (unsigned long)vdev); ++ INIT_WORK(&vdev->poweroff_work, omap34xxcam_slave_power_work); ++#endif /* OMAP34XXCAM_POWEROFF_DELAY */ ++ ++ if (v4l2_int_device_register(m)) ++ goto err; ++ } ++ ++ return 0; ++ ++err: ++ omap34xxcam_exit(); ++ return -ENODEV; ++} ++ ++MODULE_AUTHOR("Sakari Ailus "); ++MODULE_DESCRIPTION("OMAP34xx Video for Linux camera driver"); ++MODULE_LICENSE("GPL"); ++ ++late_initcall(omap34xxcam_init); ++module_exit(omap34xxcam_exit); +diff --git a/drivers/media/video/omap34xxcam.h b/drivers/media/video/omap34xxcam.h +new file mode 100644 +index 0000000..9859d15 +--- /dev/null ++++ b/drivers/media/video/omap34xxcam.h +@@ -0,0 +1,207 @@ ++/* ++ * omap34xxcam.h ++ * ++ * Copyright (C) 2006--2009 Nokia Corporation ++ * Copyright (C) 2007--2009 Texas Instruments ++ * ++ * Contact: Sakari Ailus ++ * Tuukka Toivonen ++ * ++ * Originally based on the OMAP 2 camera driver. ++ * ++ * Written by Sakari Ailus ++ * Tuukka Toivonen ++ * Sergio Aguirre ++ * Mohit Jalori ++ * Sameer Venkatraman ++ * Leonides Martinez ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA ++ * 02110-1301 USA ++ * ++ */ ++ ++#ifndef OMAP34XXCAM_H ++#define OMAP34XXCAM_H ++ ++#include ++#include "isp/isp.h" ++ ++#define CAM_NAME "omap34xxcam" ++#define CAM_SHORT_NAME "omap3" ++ ++#define OMAP_ISP_AF (1 << 4) ++#define OMAP_ISP_HIST (1 << 5) ++#define OMAP34XXCAM_XCLK_NONE -1 ++#define OMAP34XXCAM_XCLK_A 0 ++#define OMAP34XXCAM_XCLK_B 1 ++ ++#define OMAP34XXCAM_SLAVE_SENSOR 0 ++#define OMAP34XXCAM_SLAVE_LENS 1 ++#define OMAP34XXCAM_SLAVE_FLASH 2 /* This is the last slave! */ ++ ++/* mask for omap34xxcam_slave_power_set */ ++#define OMAP34XXCAM_SLAVE_POWER_SENSOR (1 << OMAP34XXCAM_SLAVE_SENSOR) ++#define OMAP34XXCAM_SLAVE_POWER_LENS (1 << OMAP34XXCAM_SLAVE_LENS) ++#define OMAP34XXCAM_SLAVE_POWER_SENSOR_LENS \ ++ (OMAP34XXCAM_SLAVE_POWER_SENSOR | OMAP34XXCAM_SLAVE_POWER_LENS) ++#define OMAP34XXCAM_SLAVE_POWER_FLASH (1 << OMAP34XXCAM_SLAVE_FLASH) ++#define OMAP34XXCAM_SLAVE_POWER_ALL -1 ++ ++#define OMAP34XXCAM_VIDEODEVS 4 ++ ++/* #define OMAP34XXCAM_POWEROFF_DELAY (2 * HZ) */ ++ ++struct omap34xxcam_device; ++struct omap34xxcam_videodev; ++ ++struct omap34xxcam_sensor_config { ++ int xclk; ++ int sensor_isp; ++ u32 capture_mem; ++ struct v4l2_fract ival_default; ++}; ++ ++struct omap34xxcam_lens_config { ++}; ++ ++struct omap34xxcam_flash_config { ++}; ++ ++/** ++ * struct omap34xxcam_hw_config - struct for vidioc_int_g_priv ioctl ++ * @xclk: OMAP34XXCAM_XCLK_A or OMAP34XXCAM_XCLK_B ++ * @sensor_isp: Is sensor smart/SOC or raw ++ * @s_pix_sparm: Access function to set pix and sparm. ++ * Pix will override sparm ++ */ ++struct omap34xxcam_hw_config { ++ int dev_index; /* Index in omap34xxcam_sensors */ ++ int dev_minor; /* Video device minor number */ ++ int dev_type; /* OMAP34XXCAM_SLAVE_* */ ++ union { ++ struct omap34xxcam_sensor_config sensor; ++ struct omap34xxcam_lens_config lens; ++ struct omap34xxcam_flash_config flash; ++ } u; ++}; ++ ++/** ++ * struct omap34xxcam_videodev - per /dev/video* structure ++ * @mutex: serialises access to this structure ++ * @cam: pointer to cam hw structure ++ * @master: we are v4l2_int_device master ++ * @sensor: sensor device ++ * @lens: lens device ++ * @flash: flash device ++ * @slaves: how many slaves we have at the moment ++ * @vfd: our video device ++ * @capture_mem: maximum kernel-allocated capture memory ++ * @if_u: sensor interface stuff ++ * @index: index of this structure in cam->vdevs ++ * @users: how many users we have ++ * @power_state: Current power state ++ * @power_state_wish: New power state when poweroff_timer expires ++ * @power_state_mask: Bitmask of devices to set the new power state ++ * @poweroff_timer: Timer for dispatching poweroff_work ++ * @poweroff_work: Work for slave power state change ++ * @sensor_config: ISP-speicific sensor configuration ++ * @lens_config: ISP-speicific lens configuration ++ * @flash_config: ISP-speicific flash configuration ++ * @want_timeperframe: Desired timeperframe ++ * @want_pix: Desired pix ++ * @pix: Current pix ++ * @streaming: streaming file handle, if streaming is enabled ++ */ ++struct omap34xxcam_videodev { ++ struct mutex mutex; /* serialises access to this structure */ ++ ++ struct omap34xxcam_device *cam; ++ struct v4l2_int_device master; ++ ++#define vdev_sensor slave[OMAP34XXCAM_SLAVE_SENSOR] ++#define vdev_lens slave[OMAP34XXCAM_SLAVE_LENS] ++#define vdev_flash slave[OMAP34XXCAM_SLAVE_FLASH] ++ struct v4l2_int_device *slave[OMAP34XXCAM_SLAVE_FLASH + 1]; ++ ++ /* number of slaves attached */ ++ int slaves; ++ ++ /*** video device parameters ***/ ++ struct video_device *vfd; ++ int capture_mem; ++ ++ /*** general driver state information ***/ ++ int index; ++ atomic_t users; ++ enum v4l2_power power_state[OMAP34XXCAM_SLAVE_FLASH + 1]; ++#ifdef OMAP34XXCAM_POWEROFF_DELAY ++ enum v4l2_power power_state_wish; ++ int power_state_mask; ++ struct timer_list poweroff_timer; ++ struct work_struct poweroff_work; ++#endif /* OMAP34XXCAM_POWEROFF_DELAY */ ++ ++#define vdev_sensor_config slave_config[OMAP34XXCAM_SLAVE_SENSOR].u.sensor ++#define vdev_lens_config slave_config[OMAP34XXCAM_SLAVE_LENS].u.lens ++#define vdev_flash_config slave_config[OMAP34XXCAM_SLAVE_FLASH].u.flash ++ struct omap34xxcam_hw_config slave_config[OMAP34XXCAM_SLAVE_FLASH + 1]; ++ ++ /*** capture data ***/ ++ struct file *streaming; ++ struct v4l2_fract want_timeperframe; ++ struct v4l2_pix_format want_pix; ++ spinlock_t pix_lock; ++ struct v4l2_pix_format pix; ++}; ++ ++/** ++ * struct omap34xxcam_device - per-device data structure ++ * @mutex: mutex serialises access to this structure ++ * @sgdma_in_queue: Number or sgdma requests in scatter-gather queue, ++ * protected by the lock above. ++ * @sgdma: ISP sgdma subsystem information structure ++ * @dma_notify: DMA notify flag ++ * @dev: device structure ++ * @vdevs: /dev/video specific structures ++ * @fck: camera module fck clock information ++ * @ick: camera module ick clock information ++ */ ++struct omap34xxcam_device { ++ struct mutex mutex; /* serialises access to this structure */ ++ ++ /*** interfaces and device ***/ ++ struct omap34xxcam_videodev vdevs[OMAP34XXCAM_VIDEODEVS]; ++ ++ /*** camera module clocks ***/ ++ struct clk *fck; ++ struct clk *ick; ++ bool sensor_if_enabled; ++}; ++ ++/** ++ * struct omap34xxcam_fh - per-filehandle data structure ++ * @vbq_lock: spinlock for the videobuf queue ++ * @vbq: V4L2 video buffer queue structure ++ * @field_count: field counter for videobuf_buffer ++ * @vdev: our /dev/video specific structure ++ */ ++struct omap34xxcam_fh { ++ spinlock_t vbq_lock; /* spinlock for the videobuf queue */ ++ struct videobuf_queue vbq; ++ atomic_t field_count; ++ struct omap34xxcam_videodev *vdev; ++}; ++ ++#endif /* ifndef OMAP34XXCAM_H */ +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/standalone/0001-Resizer-and-Previewer-driver-added-to-commit.patch b/meta/packages/linux/linux-omap-2.6.29/isp/standalone/0001-Resizer-and-Previewer-driver-added-to-commit.patch new file mode 100644 index 000000000..f796ce834 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/standalone/0001-Resizer-and-Previewer-driver-added-to-commit.patch @@ -0,0 +1,2915 @@ +From 3041daa54b49bcb6ab444c7b9e14bc6a1ade6236 Mon Sep 17 00:00:00 2001 +From: Vaibhav Hiremath +Date: Fri, 13 Feb 2009 14:44:20 +0530 +Subject: [PATCH 1/2] Resizer and Previewer driver added to commit + +The Resizer and Previewer driver added to the commit +from the patch submitted by Sergio on 12 Dec 2008. + +The new WTBU code base and Nokia fixes package doesn't contain +standalone resizer driver support. + +Following major changes done - + + - Added stand-alone resizer driver support + in isp.c file. + - Seperate Kconfig file created + - hardware access of resizer module fixed as per new + isp.c + +Signed-off-by: Vaibhav Hiremath +--- + drivers/media/video/Kconfig | 5 +- + drivers/media/video/isp/Kconfig | 16 + + drivers/media/video/isp/Makefile | 7 + + drivers/media/video/isp/isp.c | 12 + + drivers/media/video/isp/ispmmu.c | 1 + + drivers/media/video/isp/omap_previewer.c | 825 +++++++++++++++ + drivers/media/video/isp/omap_previewer.h | 162 +++ + drivers/media/video/isp/omap_resizer.c | 1634 ++++++++++++++++++++++++++++++ + include/linux/omap_resizer.h | 136 +++ + 9 files changed, 2794 insertions(+), 4 deletions(-) + create mode 100644 drivers/media/video/isp/Kconfig + create mode 100644 drivers/media/video/isp/omap_previewer.c + create mode 100644 drivers/media/video/isp/omap_previewer.h + create mode 100644 drivers/media/video/isp/omap_resizer.c + create mode 100644 include/linux/omap_resizer.h + +diff --git a/drivers/media/video/isp/Kconfig b/drivers/media/video/isp/Kconfig +new file mode 100644 +index 0000000..acda63b +--- /dev/null ++++ b/drivers/media/video/isp/Kconfig +@@ -0,0 +1,16 @@ ++# Kconfig for OMAP3 ISP driver ++ ++config VIDEO_OMAP3_ISP ++ tristate ++ select VIDEOBUF_GEN ++ select VIDEOBUF_DMA_SG ++ ++config VIDEO_OMAP34XX_ISP_PREVIEWER ++ tristate "OMAP ISP Previewer" ++ depends on !ARCH_OMAP3410 ++ select VIDEO_OMAP3_ISP ++ ++config VIDEO_OMAP34XX_ISP_RESIZER ++ tristate "OMAP ISP Resizer" ++ depends on !ARCH_OMAP3410 ++ select VIDEO_OMAP3_ISP +diff --git a/drivers/media/video/isp/Makefile b/drivers/media/video/isp/Makefile +index 0f9301c..ed10a51 100644 +--- a/drivers/media/video/isp/Makefile ++++ b/drivers/media/video/isp/Makefile +@@ -7,6 +7,13 @@ else + isp-mod-objs += \ + isp.o ispccdc.o ispmmu.o \ + isppreview.o ispresizer.o isph3a.o isphist.o isp_af.o ispcsi2.o ++ ++obj-$(CONFIG_VIDEO_OMAP34XX_ISP_PREVIEWER) += \ ++ omap_previewer.o ++ ++obj-$(CONFIG_VIDEO_OMAP34XX_ISP_RESIZER) += \ ++ omap_resizer.o ++ + endif + + obj-$(CONFIG_VIDEO_OMAP3_ISP) += isp-mod.o +diff --git a/drivers/media/video/isp/isp.c b/drivers/media/video/isp/isp.c +index 6034a56..09a1792 100644 +--- a/drivers/media/video/isp/isp.c ++++ b/drivers/media/video/isp/isp.c +@@ -521,6 +521,13 @@ int isp_set_callback(enum isp_callback_type type, isp_callback_t callback, + OMAP3_ISP_IOMEM_MAIN, + ISP_IRQ0ENABLE); + break; ++ case CBK_RESZ_DONE: ++ isp_reg_writel(IRQ0ENABLE_RSZ_DONE_IRQ, OMAP3_ISP_IOMEM_MAIN, ++ ISP_IRQ0STATUS); ++ isp_reg_writel(isp_reg_readl(OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE) | ++ IRQ0ENABLE_RSZ_DONE_IRQ, OMAP3_ISP_IOMEM_MAIN, ++ ISP_IRQ0ENABLE); ++ break; + default: + break; + } +@@ -996,6 +1003,11 @@ static irqreturn_t omap34xx_isp_isr(int irq, void *_isp) + if (!ispresizer_busy()) + ispresizer_config_shadow_registers(); + isp_buf_process(bufs); ++ } else { ++ if (irqdis->isp_callbk[CBK_RESZ_DONE]) ++ irqdis->isp_callbk[CBK_RESZ_DONE](RESZ_DONE, ++ irqdis->isp_callbk_arg1[CBK_RESZ_DONE], ++ irqdis->isp_callbk_arg2[CBK_RESZ_DONE]); + } + } + +diff --git a/drivers/media/video/isp/ispmmu.c b/drivers/media/video/isp/ispmmu.c +index 076aea1..b943d5b 100644 +--- a/drivers/media/video/isp/ispmmu.c ++++ b/drivers/media/video/isp/ispmmu.c +@@ -289,6 +289,7 @@ int ispmmu_get_mapeable_space(void) + return (L2P_TABLE_NR - no_of_l2p_alloted) * ISPMMU_TTB_ENTRIES_NR * + ISPMMU_L2D_ENTRIES_NR; + } ++EXPORT_SYMBOL_GPL(ispmmu_get_mapeable_space); + + /** + * ispmmu_map - Map a physically contiguous buffer to ISP space. +diff --git a/drivers/media/video/isp/omap_previewer.c b/drivers/media/video/isp/omap_previewer.c +new file mode 100644 +index 0000000..634a056 +--- /dev/null ++++ b/drivers/media/video/isp/omap_previewer.c +@@ -0,0 +1,825 @@ ++/* ++ * drivers/media/video/isp/omap_previewer.c ++ * ++ * Wrapper for Preview module in TI's OMAP3430 ISP ++ * ++ * Copyright (C) 2008 Texas Instruments, Inc. ++ * ++ * Contributors: ++ * Leonides Martinez ++ * Sergio Aguirre ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "isp.h" ++#include "ispmmu.h" ++#include "ispreg.h" ++#include "omap_previewer.h" ++ ++#define OMAP_PREV_NAME "omap-previewer" ++ ++static int prev_major = -1; ++static struct device *prev_dev; ++static struct class *prev_class; ++static struct prev_device *prevdevice; ++static struct platform_driver omap_previewer_driver; ++ ++static u32 prev_bufsize; ++ ++/** ++ * prev_calculate_crop - Calculate crop size according to device parameters ++ * @device: Structure containing ISP preview wrapper global information ++ * @crop: Structure containing crop size ++ * ++ * This function is used to calculate frame size reduction depending on ++ * the features enabled by the application. ++ **/ ++static void prev_calculate_crop(struct prev_device *device, ++ struct prev_cropsize *crop) ++{ ++ dev_dbg(prev_dev, "prev_calculate_crop E\n"); ++ ++ if (!device || !crop) { ++ dev_err(prev_dev, "\nErron in argument"); ++ return; ++ } ++ ++ isppreview_try_size(device->params->size_params.hsize, ++ device->params->size_params.vsize, ++ &crop->hcrop, &crop->vcrop); ++ crop->hcrop &= PREV_16PIX_ALIGN_MASK; ++ dev_dbg(prev_dev, "prev_calculate_crop L\n"); ++} ++ ++/** ++ * prev_get_status - Get status of ISP preview module ++ * @status: Structure containing the busy state. ++ * ++ * Checks if the ISP preview module is busy. ++ * ++ * Returns 0 if successful, or -EINVAL if the status parameter is invalid. ++ **/ ++static int prev_get_status(struct prev_status *status) ++{ ++ if (!status) { ++ dev_err(prev_dev, "get_status: invalid parameter\n"); ++ return -EINVAL; ++ } ++ status->hw_busy = (char)isppreview_busy(); ++ return 0; ++} ++ ++/** ++ * prev_hw_setup - Stores the desired configuration in the proper HW registers ++ * @config: Structure containing the desired configuration for ISP preview ++ * module. ++ * ++ * Reads the structure sent, and modifies the desired registers. ++ * ++ * Always returns 0. ++ **/ ++static int prev_hw_setup(struct prev_params *config) ++{ ++ dev_dbg(prev_dev, "prev_hw_setup E\n"); ++ ++ if (config->features & PREV_AVERAGER) ++ isppreview_config_averager(config->average); ++ else ++ isppreview_config_averager(0); ++ ++ if (config->features & PREV_INVERSE_ALAW) ++ isppreview_enable_invalaw(1); ++ else ++ isppreview_enable_invalaw(0); ++ ++ if (config->features & PREV_HORZ_MEDIAN_FILTER) { ++ isppreview_config_hmed(config->hmf_params); ++ isppreview_enable_hmed(1); ++ } else ++ isppreview_enable_hmed(0); ++ ++ if (config->features & PREV_DARK_FRAME_SUBTRACT) { ++ isppreview_set_darkaddr(config->drkf_params.addr); ++ isppreview_config_darklineoffset(config->drkf_params.offset); ++ isppreview_enable_drkframe(1); ++ } else ++ isppreview_enable_drkframe(0); ++ ++ if (config->features & PREV_LENS_SHADING) { ++ isppreview_config_drkf_shadcomp(config->lens_shading_shift); ++ isppreview_enable_shadcomp(1); ++ } else ++ isppreview_enable_shadcomp(0); ++ ++ dev_dbg(prev_dev, "prev_hw_setup L\n"); ++ return 0; ++} ++ ++/** ++ * prev_validate_params - Validate configuration parameters for Preview Wrapper ++ * @params: Structure containing configuration parameters ++ * ++ * Validate configuration parameters for Preview Wrapper ++ * ++ * Returns 0 if successful, or -EINVAL if a parameter value is invalid. ++ **/ ++static int prev_validate_params(struct prev_params *params) ++{ ++ if (!params) { ++ dev_err(prev_dev, "validate_params: error in argument"); ++ goto err_einval; ++ } ++ ++ if ((params->features & PREV_AVERAGER) == PREV_AVERAGER) { ++ if ((params->average != NO_AVE) ++ && (params->average != AVE_2_PIX) ++ && (params->average != AVE_4_PIX) ++ && (params->average != AVE_8_PIX)) { ++ dev_err(prev_dev, "validate_params: wrong pix " ++ "average\n"); ++ goto err_einval; ++ } else if (((params->average == AVE_2_PIX) ++ && (params->size_params.hsize % 2)) ++ || ((params->average == AVE_4_PIX) ++ && (params->size_params.hsize % 4)) ++ || ((params->average == AVE_8_PIX) ++ && (params->size_params.hsize % 8))) { ++ dev_err(prev_dev, "validate_params: " ++ "wrong pix average for input size\n"); ++ goto err_einval; ++ } ++ } ++ ++ if ((params->size_params.pixsize != PREV_INWIDTH_8BIT) ++ && (params->size_params.pixsize ++ != PREV_INWIDTH_10BIT)) { ++ dev_err(prev_dev, "validate_params: wrong pixsize\n"); ++ goto err_einval; ++ } ++ ++ if (params->size_params.hsize > MAX_IMAGE_WIDTH ++ || params->size_params.hsize < 0) { ++ dev_err(prev_dev, "validate_params: wrong hsize\n"); ++ goto err_einval; ++ } ++ ++ if ((params->pix_fmt != YCPOS_YCrYCb) ++ && (YCPOS_YCbYCr != params->pix_fmt) ++ && (YCPOS_CbYCrY != params->pix_fmt) ++ && (YCPOS_CrYCbY != params->pix_fmt)) { ++ dev_err(prev_dev, "validate_params: wrong pix_fmt"); ++ goto err_einval; ++ } ++ ++ if ((params->features & PREV_DARK_FRAME_SUBTRACT) ++ && (params->features ++ & PREV_DARK_FRAME_CAPTURE)) { ++ dev_err(prev_dev, "validate_params: DARK FRAME CAPTURE and " ++ "SUBSTRACT cannot be enabled " ++ "at same time\n"); ++ goto err_einval; ++ } ++ ++ if (params->features & PREV_DARK_FRAME_SUBTRACT) ++ if (!params->drkf_params.addr ++ || (params->drkf_params.offset % 32)) { ++ dev_err(prev_dev, "validate_params: dark frame " ++ "address\n"); ++ goto err_einval; ++ } ++ ++ if (params->features & PREV_LENS_SHADING) ++ if ((params->lens_shading_shift > 7) ++ || !params->drkf_params.addr ++ || (params->drkf_params.offset % 32)) { ++ dev_err(prev_dev, "validate_params: lens shading " ++ "shift\n"); ++ goto err_einval; ++ } ++ ++ if ((params->size_params.in_pitch <= 0) ++ || (params->size_params.in_pitch % 32)) { ++ params->size_params.in_pitch = ++ (params->size_params.hsize * 2) & 0xFFE0; ++ dev_err(prev_dev, "\nError in in_pitch; new value = %d", ++ params->size_params.in_pitch); ++ } ++ ++ return 0; ++err_einval: ++ return -EINVAL; ++} ++ ++/** ++ * preview_isr - Callback from ISP driver for ISP Preview Interrupt ++ * @status: ISP IRQ0STATUS register value ++ * @arg1: Structure containing ISP preview wrapper global information ++ * @arg2: Currently not used ++ **/ ++static void preview_isr(unsigned long status, isp_vbq_callback_ptr arg1, ++ void *arg2) ++{ ++ struct prev_device *device = (struct prev_device *)arg1; ++ ++ if ((status & PREV_DONE) != PREV_DONE) ++ return; ++ ++ if (device) ++ complete(&device->wfc); ++} ++ ++/** ++ * prev_do_preview - Performs the Preview process ++ * @device: Structure containing ISP preview wrapper global information ++ * @arg: Currently not used ++ * ++ * Returns 0 if successful, or -EINVAL if the sent parameters are invalid. ++ **/ ++static int prev_do_preview(struct prev_device *device, int *arg) ++{ ++ int bpp, size; ++ int ret = 0; ++ u32 out_hsize, out_vsize, out_line_offset; ++ ++ dev_dbg(prev_dev, "prev_do_preview E\n"); ++ ++ if (!device) { ++ dev_err(prev_dev, "preview: invalid parameters\n"); ++ return -EINVAL; ++ } ++ ++ if (device->params->size_params.pixsize == PREV_INWIDTH_8BIT) ++ bpp = 1; ++ else ++ bpp = 2; ++ ++ size = device->params->size_params.hsize * ++ device->params->size_params.vsize * bpp; ++ ++ ret = isppreview_set_inaddr(device->isp_addr_read); ++ if (ret) ++ goto out; ++ ++ ret = isppreview_set_outaddr(device->isp_addr_read); ++ if (ret) ++ goto out; ++ ++ isppreview_try_size(device->params->size_params.hsize, ++ device->params->size_params.vsize, ++ &out_hsize, &out_vsize); ++ ++ ret = isppreview_config_inlineoffset(device->params->size_params.hsize ++ * bpp); ++ if (ret) ++ goto out; ++ ++ out_line_offset = (out_hsize * bpp) & PREV_32BYTES_ALIGN_MASK; ++ ++ ret = isppreview_config_outlineoffset(out_line_offset); ++ if (ret) ++ goto out; ++ ++ ret = isppreview_config_size(device->params->size_params.hsize, ++ device->params->size_params.vsize, ++ out_hsize, out_vsize); ++ if (ret) ++ goto out; ++ ++ isppreview_config_datapath(PRV_RAW_MEM, PREVIEW_MEM); ++ ++ ret = isp_set_callback(CBK_PREV_DONE, preview_isr, (void *)device, ++ (void *)NULL); ++ if (ret) { ++ dev_err(prev_dev, "ERROR while setting Previewer callback!\n"); ++ goto out; ++ } ++ isppreview_enable(1); ++ ++ wait_for_completion_interruptible(&device->wfc); ++ ++ if (device->isp_addr_read) { ++ ispmmu_vunmap(device->isp_addr_read); ++ device->isp_addr_read = 0; ++ } ++ ++ ret = isp_unset_callback(CBK_PREV_DONE); ++ ++ dev_dbg(prev_dev, "prev_do_preview L\n"); ++out: ++ return ret; ++} ++ ++/** ++ * previewer_vbq_release - Videobuffer queue release ++ * @q: Structure containing the videobuffer queue. ++ * @vb: Structure containing the videobuffer used for previewer processing. ++ **/ ++static void previewer_vbq_release(struct videobuf_queue *q, ++ struct videobuf_buffer *vb) ++{ ++ struct prev_fh *fh = q->priv_data; ++ struct prev_device *device = fh->device; ++ ++ ispmmu_vunmap(device->isp_addr_read); ++ device->isp_addr_read = 0; ++ spin_lock(&device->vbq_lock); ++ vb->state = VIDEOBUF_NEEDS_INIT; ++ spin_unlock(&device->vbq_lock); ++ dev_dbg(prev_dev, "previewer_vbq_release\n"); ++} ++ ++/** ++ * previewer_vbq_setup - Sets up the videobuffer size and validates count. ++ * @q: Structure containing the videobuffer queue. ++ * @cnt: Number of buffers requested ++ * @size: Size in bytes of the buffer used for previewing ++ * ++ * Always returns 0. ++ **/ ++static int previewer_vbq_setup(struct videobuf_queue *q, ++ unsigned int *cnt, ++ unsigned int *size) ++{ ++ struct prev_fh *fh = q->priv_data; ++ struct prev_device *device = fh->device; ++ u32 bpp = 1; ++ ++ spin_lock(&device->vbq_lock); ++ if (*cnt <= 0) ++ *cnt = VIDEO_MAX_FRAME; ++ ++ if (*cnt > VIDEO_MAX_FRAME) ++ *cnt = VIDEO_MAX_FRAME; ++ ++ if (!device->params->size_params.hsize || ++ !device->params->size_params.vsize) { ++ dev_err(prev_dev, "Can't setup buffer size\n"); ++ spin_unlock(&device->vbq_lock); ++ return -EINVAL; ++ } ++ ++ if (device->params->size_params.pixsize == PREV_INWIDTH_10BIT) ++ bpp = 2; ++ *size = prev_bufsize = bpp * device->params->size_params.hsize ++ * device->params->size_params.vsize; ++ spin_unlock(&device->vbq_lock); ++ dev_dbg(prev_dev, "previewer_vbq_setup\n"); ++ return 0; ++} ++ ++/** ++ * previewer_vbq_prepare - Videobuffer is prepared and mmapped. ++ * @q: Structure containing the videobuffer queue. ++ * @vb: Structure containing the videobuffer used for previewer processing. ++ * @field: Type of field to set in videobuffer device. ++ * ++ * Returns 0 if successful, or -EINVAL if buffer couldn't get allocated, or ++ * -EIO if the ISP MMU mapping fails ++ **/ ++static int previewer_vbq_prepare(struct videobuf_queue *q, ++ struct videobuf_buffer *vb, ++ enum v4l2_field field) ++{ ++ struct prev_fh *fh = q->priv_data; ++ struct prev_device *device = fh->device; ++ int err = -EINVAL; ++ unsigned int isp_addr; ++ struct videobuf_dmabuf *dma = videobuf_to_dma(vb); ++ ++ dev_dbg(prev_dev, "previewer_vbq_prepare E\n"); ++ spin_lock(&device->vbq_lock); ++ if (vb->baddr) { ++ vb->size = prev_bufsize; ++ vb->bsize = prev_bufsize; ++ } else { ++ spin_unlock(&device->vbq_lock); ++ dev_err(prev_dev, "No user buffer allocated\n"); ++ goto out; ++ } ++ ++ vb->width = device->params->size_params.hsize; ++ vb->height = device->params->size_params.vsize; ++ vb->field = field; ++ spin_unlock(&device->vbq_lock); ++ ++ if (vb->state == VIDEOBUF_NEEDS_INIT) { ++ err = videobuf_iolock(q, vb, NULL); ++ if (!err) { ++ isp_addr = ispmmu_vmap(dma->sglist, dma->sglen); ++ if (!isp_addr) ++ err = -EIO; ++ else ++ device->isp_addr_read = isp_addr; ++ } ++ } ++ ++ if (!err) { ++ vb->state = VIDEOBUF_PREPARED; ++ flush_cache_user_range(NULL, vb->baddr, ++ (vb->baddr + vb->bsize)); ++ } else ++ previewer_vbq_release(q, vb); ++ ++ dev_dbg(prev_dev, "previewer_vbq_prepare L\n"); ++out: ++ return err; ++} ++ ++static void previewer_vbq_queue(struct videobuf_queue *q, ++ struct videobuf_buffer *vb) ++{ ++ return; ++} ++ ++/** ++ * previewer_open - Initializes and opens the Preview Wrapper ++ * @inode: Inode structure associated with the Preview Wrapper ++ * @filp: File structure associated with the Preview Wrapper ++ * ++ * Returns 0 if successful, -EACCES if its unable to initialize default config, ++ * -EBUSY if its already opened or the ISP module is not available, or -ENOMEM ++ * if its unable to allocate the device in kernel space memory. ++ **/ ++static int previewer_open(struct inode *inode, struct file *filp) ++{ ++ int ret = 0; ++ struct prev_device *device = prevdevice; ++ struct prev_params *config = isppreview_get_config(); ++ struct prev_fh *fh; ++ ++ if (config == NULL) { ++ dev_err(prev_dev, "Unable to initialize default config " ++ "from isppreviewer\n\n"); ++ return -EACCES; ++ } ++ ++ if (device->opened || (filp->f_flags & O_NONBLOCK)) { ++ dev_err(prev_dev, "previewer_open: device is already " ++ "opened\n"); ++ return -EBUSY; ++ } ++ ++ fh = kzalloc(sizeof(struct prev_fh), GFP_KERNEL); ++ if (NULL == fh) ++ return -ENOMEM; ++ ++ isp_get(); ++ ret = isppreview_request(); ++ if (ret) { ++ isp_put(); ++ dev_err(prev_dev, "Can't acquire isppreview\n"); ++ return ret; ++ } ++ ++ device->params = config; ++ device->opened = 1; ++ ++ filp->private_data = fh; ++ fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; ++ fh->device = device; ++ ++ videobuf_queue_sg_init(&fh->vbq, &device->vbq_ops, NULL, ++ &device->vbq_lock, fh->type, ++ V4L2_FIELD_NONE, ++ sizeof(struct videobuf_buffer), fh); ++ ++ init_completion(&device->wfc); ++ device->wfc.done = 0; ++ mutex_init(&device->prevwrap_mutex); ++ ++ return 0; ++} ++ ++/** ++ * previewer_release - Releases Preview Wrapper and frees up allocated memory ++ * @inode: Inode structure associated with the Preview Wrapper ++ * @filp: File structure associated with the Preview Wrapper ++ * ++ * Always returns 0. ++ **/ ++static int previewer_release(struct inode *inode, struct file *filp) ++{ ++ struct prev_fh *fh = filp->private_data; ++ struct prev_device *device = fh->device; ++ struct videobuf_queue *q = &fh->vbq; ++ ++ device->opened = 0; ++ device->params = NULL; ++ isppreview_free(); ++ videobuf_mmap_free(q); ++ isp_put(); ++ prev_bufsize = 0; ++ filp->private_data = NULL; ++ kfree(fh); ++ ++ dev_dbg(prev_dev, "previewer_release\n"); ++ return 0; ++} ++ ++/** ++ * previewer_mmap - Memory maps the Preview Wrapper module. ++ * @file: File structure associated with the Preview Wrapper ++ * @vma: Virtual memory area structure. ++ * ++ * Returns 0 if successful, or returned value by the videobuf_mmap_mapper() ++ * function. ++ **/ ++static int previewer_mmap(struct file *file, struct vm_area_struct *vma) ++{ ++ struct prev_fh *fh = file->private_data; ++ dev_dbg(prev_dev, "previewer_mmap\n"); ++ ++ return videobuf_mmap_mapper(&fh->vbq, vma); ++} ++ ++/** ++ * previewer_ioctl - I/O control function for Preview Wrapper ++ * @inode: Inode structure associated with the Preview Wrapper. ++ * @file: File structure associated with the Preview Wrapper. ++ * @cmd: Type of command to execute. ++ * @arg: Argument to send to requested command. ++ * ++ * Returns 0 if successful, -1 if bad command passed or access is denied, ++ * -EFAULT if copy_from_user() or copy_to_user() fails, -EINVAL if parameter ++ * validation fails or parameter structure is not present ++ **/ ++static int previewer_ioctl(struct inode *inode, struct file *file, ++ unsigned int cmd, unsigned long arg) ++{ ++ int ret = 0; ++ struct prev_params params; ++ struct prev_fh *fh = file->private_data; ++ struct prev_device *device = fh->device; ++ ++ dev_dbg(prev_dev, "Entering previewer_ioctl()\n"); ++ ++ if ((_IOC_TYPE(cmd) != PREV_IOC_BASE) ++ || (_IOC_NR(cmd) > PREV_IOC_MAXNR)) { ++ dev_err(prev_dev, "Bad command Value \n"); ++ goto err_minusone; ++ } ++ ++ if (_IOC_DIR(cmd) & _IOC_READ) ++ ret = !access_ok(VERIFY_WRITE, (void *)arg, _IOC_SIZE(cmd)); ++ else if (_IOC_DIR(cmd) & _IOC_WRITE) ++ ret = !access_ok(VERIFY_READ, (void *)arg, _IOC_SIZE(cmd)); ++ if (ret) { ++ dev_err(prev_dev, "access denied\n"); ++ goto err_minusone; ++ } ++ ++ switch (cmd) { ++ case PREV_REQBUF: ++ if (mutex_lock_interruptible(&device->prevwrap_mutex)) ++ goto err_eintr; ++ ret = videobuf_reqbufs(&fh->vbq, (void *)arg); ++ mutex_unlock(&device->prevwrap_mutex); ++ break; ++ ++ case PREV_QUERYBUF: ++ if (mutex_lock_interruptible(&device->prevwrap_mutex)) ++ goto err_eintr; ++ ret = videobuf_querybuf(&fh->vbq, (void *)arg); ++ mutex_unlock(&device->prevwrap_mutex); ++ break; ++ ++ case PREV_QUEUEBUF: ++ if (mutex_lock_interruptible(&device->prevwrap_mutex)) ++ goto err_eintr; ++ ret = videobuf_qbuf(&fh->vbq, (void *)arg); ++ mutex_unlock(&device->prevwrap_mutex); ++ break; ++ ++ case PREV_SET_PARAM: ++ if (mutex_lock_interruptible(&device->prevwrap_mutex)) ++ goto err_eintr; ++ if (copy_from_user(¶ms, (struct prev_params *)arg, ++ sizeof(struct prev_params))) { ++ mutex_unlock(&device->prevwrap_mutex); ++ return -EFAULT; ++ } ++ ret = prev_validate_params(¶ms); ++ if (ret < 0) { ++ dev_err(prev_dev, "Error validating parameters!\n"); ++ mutex_unlock(&device->prevwrap_mutex); ++ goto out; ++ } ++ if (device->params) ++ memcpy(device->params, ¶ms, ++ sizeof(struct prev_params)); ++ else { ++ mutex_unlock(&device->prevwrap_mutex); ++ return -EINVAL; ++ } ++ ++ ret = prev_hw_setup(device->params); ++ mutex_unlock(&device->prevwrap_mutex); ++ break; ++ ++ case PREV_GET_PARAM: ++ if (copy_to_user((struct prev_params *)arg, device->params, ++ sizeof(struct prev_params))) ++ ret = -EFAULT; ++ break; ++ ++ case PREV_GET_STATUS: ++ ret = prev_get_status((struct prev_status *)arg); ++ break; ++ ++ case PREV_PREVIEW: ++ if (mutex_lock_interruptible(&device->prevwrap_mutex)) ++ goto err_eintr; ++ ret = prev_do_preview(device, (int *)arg); ++ mutex_unlock(&device->prevwrap_mutex); ++ break; ++ ++ case PREV_GET_CROPSIZE: ++ { ++ struct prev_cropsize outputsize; ++ prev_calculate_crop(device, &outputsize); ++ if (copy_to_user((struct prev_cropsize *)arg, &outputsize, ++ sizeof(struct prev_cropsize))) ++ ret = -EFAULT; ++ } ++ break; ++ ++ default: ++ dev_err(prev_dev, "previewer_ioctl: Invalid Command Value\n"); ++ ret = -EINVAL; ++ } ++out: ++ return ret; ++err_minusone: ++ return -1; ++err_eintr: ++ return -EINTR; ++} ++ ++/** ++ * previewer_platform_release - Acts when Reference count is zero ++ * @device: Structure containing ISP preview wrapper global information ++ * ++ * This is called when the reference count goes to zero ++ **/ ++static void previewer_platform_release(struct device *device) ++{ ++ dev_dbg(prev_dev, "previewer_platform_release()\n"); ++} ++ ++static struct file_operations prev_fops = { ++ .owner = THIS_MODULE, ++ .open = previewer_open, ++ .release = previewer_release, ++ .mmap = previewer_mmap, ++ .ioctl = previewer_ioctl, ++}; ++ ++static struct platform_device omap_previewer_device = { ++ .name = OMAP_PREV_NAME, ++ .id = -1, ++ .dev = { ++ .release = previewer_platform_release, ++ } ++}; ++ ++/** ++ * previewer_probe - Checks for device presence ++ * @pdev: Structure containing details of the current device. ++ * ++ * Always returns 0 ++ **/ ++static int __init previewer_probe(struct platform_device *pdev) ++{ ++ return 0; ++} ++ ++/** ++ * previewer_remove - Handles the removal of the driver ++ * @pdev: Structure containing details of the current device. ++ * ++ * Always returns 0. ++ **/ ++static int previewer_remove(struct platform_device *pdev) ++{ ++ dev_dbg(prev_dev, "previewer_remove()\n"); ++ ++ platform_device_unregister(&omap_previewer_device); ++ platform_driver_unregister(&omap_previewer_driver); ++ unregister_chrdev(prev_major, OMAP_PREV_NAME); ++ return 0; ++} ++ ++static struct platform_driver omap_previewer_driver = { ++ .probe = previewer_probe, ++ .remove = previewer_remove, ++ .driver = { ++ .owner = THIS_MODULE, ++ .name = OMAP_PREV_NAME, ++ }, ++}; ++ ++/** ++ * omap_previewer_init - Initialization of Preview Wrapper ++ * ++ * Returns 0 if successful, -ENOMEM if could not allocate memory, -ENODEV if ++ * could not register the wrapper as a character device, or other errors if the ++ * device or driver can't register. ++ **/ ++static int __init omap_previewer_init(void) ++{ ++ int ret; ++ struct prev_device *device; ++ ++ device = kzalloc(sizeof(struct prev_device), GFP_KERNEL); ++ if (!device) { ++ dev_err(prev_dev, OMAP_PREV_NAME ": could not allocate" ++ " memory\n"); ++ return -ENOMEM; ++ } ++ prev_major = register_chrdev(0, OMAP_PREV_NAME, &prev_fops); ++ ++ if (prev_major < 0) { ++ dev_err(prev_dev, OMAP_PREV_NAME ": initialization " ++ "failed. could not register character " ++ "device\n"); ++ return -ENODEV; ++ } ++ ++ ret = platform_driver_register(&omap_previewer_driver); ++ if (ret) { ++ dev_err(prev_dev, OMAP_PREV_NAME ++ ": failed to register platform driver!\n"); ++ goto fail2; ++ } ++ ret = platform_device_register(&omap_previewer_device); ++ if (ret) { ++ dev_err(prev_dev, OMAP_PREV_NAME ++ ": failed to register platform device!\n"); ++ goto fail3; ++ } ++ ++ prev_class = class_create(THIS_MODULE, OMAP_PREV_NAME); ++ if (!prev_class) ++ goto fail4; ++ ++ prev_dev = device_create(prev_class, prev_dev, ++ (MKDEV(prev_major, 0)), NULL, ++ OMAP_PREV_NAME); ++ dev_dbg(prev_dev, OMAP_PREV_NAME ": Registered Previewer Wrapper\n"); ++ device->opened = 0; ++ ++ device->vbq_ops.buf_setup = previewer_vbq_setup; ++ device->vbq_ops.buf_prepare = previewer_vbq_prepare; ++ device->vbq_ops.buf_release = previewer_vbq_release; ++ device->vbq_ops.buf_queue = previewer_vbq_queue; ++ spin_lock_init(&device->vbq_lock); ++ ++ prevdevice = device; ++ return 0; ++ ++fail4: ++ platform_device_unregister(&omap_previewer_device); ++fail3: ++ platform_driver_unregister(&omap_previewer_driver); ++fail2: ++ unregister_chrdev(prev_major, OMAP_PREV_NAME); ++ ++ return ret; ++} ++ ++/** ++ * omap_previewer_exit - Close of Preview Wrapper ++ **/ ++static void __exit omap_previewer_exit(void) ++{ ++ previewer_remove(&omap_previewer_device); ++ kfree(prevdevice); ++ prev_major = -1; ++} ++ ++module_init(omap_previewer_init); ++module_exit(omap_previewer_exit); ++ ++MODULE_AUTHOR("Texas Instruments"); ++MODULE_DESCRIPTION("OMAP ISP Previewer"); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/media/video/isp/omap_previewer.h b/drivers/media/video/isp/omap_previewer.h +new file mode 100644 +index 0000000..0bb31cd +--- /dev/null ++++ b/drivers/media/video/isp/omap_previewer.h +@@ -0,0 +1,162 @@ ++/* ++ * drivers/media/video/isp/omap_previewer.h ++ * ++ * Header file for Preview module wrapper in TI's OMAP3430 ISP ++ * ++ * Copyright (C) 2008 Texas Instruments, Inc. ++ * ++ * Contributors: ++ * Leonides Martinez ++ * Sergio Aguirre ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#include "isppreview.h" ++ ++#ifndef OMAP_ISP_PREVIEW_WRAP_H ++#define OMAP_ISP_PREVIEW_WRAP_H ++ ++#define PREV_IOC_BASE 'P' ++#define PREV_REQBUF _IOWR(PREV_IOC_BASE, 1,\ ++ struct v4l2_requestbuffers) ++#define PREV_QUERYBUF _IOWR(PREV_IOC_BASE, 2,\ ++ struct v4l2_buffer) ++#define PREV_SET_PARAM _IOW(PREV_IOC_BASE, 3,\ ++ struct prev_params) ++#define PREV_GET_PARAM _IOWR(PREV_IOC_BASE, 4,\ ++ struct prev_params) ++#define PREV_PREVIEW _IOR(PREV_IOC_BASE, 5, int) ++#define PREV_GET_STATUS _IOR(PREV_IOC_BASE, 6, char) ++#define PREV_GET_CROPSIZE _IOR(PREV_IOC_BASE, 7,\ ++ struct prev_cropsize) ++#define PREV_QUEUEBUF _IOWR(PREV_IOC_BASE, 8,\ ++ struct v4l2_buffer) ++#define PREV_IOC_MAXNR 8 ++ ++#define LUMA_TABLE_SIZE 128 ++#define GAMMA_TABLE_SIZE 1024 ++#define CFA_COEFF_TABLE_SIZE 576 ++#define NOISE_FILTER_TABLE_SIZE 256 ++ ++#define MAX_IMAGE_WIDTH 3300 ++ ++#define PREV_INWIDTH_8BIT 0 /* pixel width of 8 bits */ ++#define PREV_INWIDTH_10BIT 1 /* pixel width of 10 bits */ ++ ++#define PREV_32BYTES_ALIGN_MASK 0xFFFFFFE0 ++#define PREV_16PIX_ALIGN_MASK 0xFFFFFFF0 ++ ++/** ++ * struct prev_rgbblending - Structure for RGB2RGB blending parameters ++ * @blending: Color correlation 3x3 matrix. ++ * @offset: Color correlation offsets. ++ */ ++struct prev_rgbblending { ++ short blending[RGB_MAX][RGB_MAX]; /* color correlation 3x3 ++ * matrix. ++ */ ++ short offset[RGB_MAX]; /* color correlation offsets */ ++}; ++ ++/** ++ * struct prev_cfa_coeffs - Structure for CFA coefficients ++ * @hthreshold: Horizontal threshold. ++ * @vthreshold: Vertical threshold. ++ * @coeffs: CFA coefficients ++ */ ++struct prev_cfa_coeffs { ++ char hthreshold, vthreshold; ++ int coeffs[CFA_COEFF_TABLE_SIZE]; ++}; ++ ++/** ++ * struct prev_gamma_coeffs - Structure for Gamma Coefficients ++ * @red: Table of gamma correction values for red color. ++ * @green: Table of gamma correction values for green color. ++ * @blue: Table of gamma correction values for blue color. ++ */ ++struct prev_gamma_coeffs { ++ unsigned char red[GAMMA_TABLE_SIZE]; ++ unsigned char green[GAMMA_TABLE_SIZE]; ++ unsigned char blue[GAMMA_TABLE_SIZE]; ++}; ++ ++/** ++ * struct prev_noiseflt_coeffs - Structure for Noise Filter Coefficients. ++ * @noise: Noise filter table. ++ * @strength: Used to find out weighted average. ++ */ ++struct prev_noiseflt_coeffs { ++ unsigned char noise[NOISE_FILTER_TABLE_SIZE]; ++ unsigned char strength; ++}; ++ ++/** ++ * struct prev_chroma_spr - Structure for Chroma Suppression. ++ * @hpfy: High passed version of Y or normal Y. ++ * @threshold: Threshold for chroma suppress. ++ * @gain: Chroma suppression gain ++ */ ++struct prev_chroma_spr { ++ unsigned char hpfy; ++ char threshold; ++ unsigned char gain; ++}; ++ ++/** ++ * struct prev_status - Structure to know status of the hardware ++ * @hw_busy: Flag to indicate if Hardware is Busy. ++ */ ++struct prev_status { ++ char hw_busy; ++}; ++ ++/** ++ * struct prev_cropsize - Structure to know crop size. ++ * @hcrop: Horizontal size of crop window. ++ * @vcrop: Vertical size of crop window. ++ */ ++struct prev_cropsize { ++ int hcrop; ++ int vcrop; ++}; ++ ++/** ++ * struct prev_device - Global device information structure. ++ * @params: Pointer to structure containing preview parameters. ++ * @opened: State of the device. ++ * @wfc: Wait for completion. Used for locking operations. ++ * @prevwrap_mutex: Mutex for preview wrapper use. ++ * @vbq_lock: Spinlock for videobuf queues. ++ * @vbq_ops: Videobuf queue operations ++ * @isp_addr_read: Input/Output address ++ */ ++struct prev_device { ++ struct prev_params *params; ++ unsigned char opened; ++ struct completion wfc; ++ struct mutex prevwrap_mutex; /* For generic internal use */ ++ spinlock_t vbq_lock; /* For videobuffer queue handling */ ++ struct videobuf_queue_ops vbq_ops; ++ dma_addr_t isp_addr_read; ++}; ++ ++/** ++ * struct prev_fh - Per-filehandle data structure ++ * @type: Used buffer type. ++ * @vbq: Videobuffer queue. ++ * @device: Pointer to device information structure. ++ */ ++struct prev_fh { ++ enum v4l2_buf_type type; ++ struct videobuf_queue vbq; ++ struct prev_device *device; ++}; ++#endif +diff --git a/drivers/media/video/isp/omap_resizer.c b/drivers/media/video/isp/omap_resizer.c +new file mode 100644 +index 0000000..54bc425 +--- /dev/null ++++ b/drivers/media/video/isp/omap_resizer.c +@@ -0,0 +1,1634 @@ ++/* ++ * drivers/media/video/isp/omap_resizer.c ++ * ++ * Wrapper for Resizer module in TI's OMAP3430 ISP ++ * ++ * Copyright (C) 2008 Texas Instruments, Inc. ++ * ++ * Contributors: ++ * Sergio Aguirre ++ * Troy Laramy ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "isp.h" ++#include "ispmmu.h" ++#include "ispreg.h" ++#include "ispresizer.h" ++#include ++ ++#define OMAP_REZR_NAME "omap-resizer" ++ ++/* Defines and Constants*/ ++#define MAX_CHANNELS 16 ++#define MAX_IMAGE_WIDTH 2047 ++#define MAX_IMAGE_WIDTH_HIGH 2047 ++#define ALIGNMENT 16 ++#define CHANNEL_BUSY 1 ++#define CHANNEL_FREE 0 ++#define PIXEL_EVEN 2 ++#define RATIO_MULTIPLIER 256 ++/* Bit position Macro */ ++/* macro for bit set and clear */ ++#define BITSET(variable, bit) ((variable) | (1 << bit)) ++#define BITRESET(variable, bit) ((variable) & ~(0x00000001 << (bit))) ++#define SET_BIT_INPUTRAM 28 ++#define SET_BIT_CBLIN 29 ++#define SET_BIT_INPTYP 27 ++#define SET_BIT_YCPOS 26 ++#define INPUT_RAM 1 ++#define UP_RSZ_RATIO 64 ++#define DOWN_RSZ_RATIO 512 ++#define UP_RSZ_RATIO1 513 ++#define DOWN_RSZ_RATIO1 1024 ++#define RSZ_IN_SIZE_VERT_SHIFT 16 ++#define MAX_HORZ_PIXEL_8BIT 31 ++#define MAX_HORZ_PIXEL_16BIT 15 ++#define NUM_PHASES 8 ++#define NUM_TAPS 4 ++#define NUM_D2PH 4 /* for downsampling * 2+x ~ 4x, ++ * number of phases ++ */ ++#define NUM_D2TAPS 7 /* for downsampling * 2+x ~ 4x, ++ * number of taps ++ */ ++#define ALIGN32 32 ++#define MAX_COEF_COUNTER 16 ++#define COEFF_ADDRESS_OFFSET 0x04 ++ ++/* Global structure which contains information about number of channels ++ and protection variables */ ++struct device_params { ++ ++ unsigned char opened; /* state of the device */ ++ struct completion compl_isr; /* Completion for interrupt */ ++ struct mutex reszwrap_mutex; /* Semaphore for array */ ++ ++ struct videobuf_queue_ops vbq_ops; /* videobuf queue operations */ ++}; ++ ++/* Register mapped structure which contains the every register ++ information */ ++struct resizer_config { ++ u32 rsz_pcr; /* pcr register mapping ++ * variable. ++ */ ++ u32 rsz_in_start; /* in_start register mapping ++ * variable. ++ */ ++ u32 rsz_in_size; /* in_size register mapping ++ * variable. ++ */ ++ u32 rsz_out_size; /* out_size register mapping ++ * variable. ++ */ ++ u32 rsz_cnt; /* rsz_cnt register mapping ++ * variable. ++ */ ++ u32 rsz_sdr_inadd; /* sdr_inadd register mapping ++ * variable. ++ */ ++ u32 rsz_sdr_inoff; /* sdr_inoff register mapping ++ * variable. ++ */ ++ u32 rsz_sdr_outadd; /* sdr_outadd register mapping ++ * variable. ++ */ ++ u32 rsz_sdr_outoff; /* sdr_outbuff register ++ * mapping variable. ++ */ ++ u32 rsz_coeff_horz[16]; /* horizontal coefficients ++ * mapping array. ++ */ ++ u32 rsz_coeff_vert[16]; /* vertical coefficients ++ * mapping array. ++ */ ++ u32 rsz_yehn; /* yehn(luma)register mapping ++ * variable. ++ */ ++}; ++ ++struct rsz_mult { ++ int in_hsize; /* input frame horizontal ++ * size. ++ */ ++ int in_vsize; /* input frame vertical size. ++ */ ++ int out_hsize; /* output frame horizontal ++ * size. ++ */ ++ int out_vsize; /* output frame vertical ++ * size. ++ */ ++ int in_pitch; /* offset between two rows of ++ * input frame. ++ */ ++ int out_pitch; /* offset between two rows of ++ * output frame. ++ */ ++ int end_hsize; ++ int end_vsize; ++ int num_htap; /* 0 = 7tap; 1 = 4tap */ ++ int num_vtap; /* 0 = 7tap; 1 = 4tap */ ++ int active; ++ int inptyp; ++ int vrsz; ++ int hrsz; ++ int hstph; /* for specifying horizontal ++ * starting phase. ++ */ ++ int vstph; ++ int pix_fmt; /* # defined, UYVY or YUYV. */ ++ int cbilin; /* # defined, filter with luma ++ * or bi-linear. ++ */ ++ u16 tap4filt_coeffs[32]; /* horizontal filter ++ * coefficients. ++ */ ++ u16 tap7filt_coeffs[32]; /* vertical filter ++ * coefficients. ++ */ ++}; ++/* Channel specific structure contains information regarding ++ the every channel */ ++struct channel_config { ++ struct resizer_config register_config; /* Instance of register set ++ * mapping structure ++ */ ++ int status; /* Specifies whether the ++ * channel is busy or not ++ */ ++ struct mutex chanprotection_mutex; ++ enum config_done config_state; ++ u8 input_buf_index; ++ u8 output_buf_index; ++ ++}; ++ ++/* per-filehandle data structure */ ++struct rsz_fh { ++ struct rsz_params *params; ++ struct channel_config *config; ++ struct rsz_mult *multipass; /* Multipass to support ++ * resizing ration outside ++ * of 0.25x to 4x ++ */ ++ spinlock_t vbq_lock; /* spinlock for videobuf ++ * queues. ++ */ ++ enum v4l2_buf_type type; ++ struct videobuf_queue vbq; ++ struct device_params *device; ++ ++ dma_addr_t isp_addr_read; /* Input/Output address */ ++ dma_addr_t isp_addr_write; /* Input/Output address */ ++ u32 rsz_bufsize; /* channel specific buffersize ++ */ ++}; ++ ++static struct device_params *device_config; ++static struct device *rsz_device; ++static int rsz_major = -1; ++/* functions declaration */ ++static void rsz_hardware_setup(struct channel_config *rsz_conf_chan); ++static int rsz_set_params(struct rsz_mult *multipass, struct rsz_params *, ++ struct channel_config *); ++static int rsz_get_params(struct rsz_params *, struct channel_config *); ++static void rsz_copy_data(struct rsz_mult *multipass, ++ struct rsz_params *params); ++static void rsz_isr(unsigned long status, isp_vbq_callback_ptr arg1, ++ void *arg2); ++static void rsz_calculate_crop(struct channel_config *rsz_conf_chan, ++ struct rsz_cropsize *cropsize); ++static int rsz_set_multipass(struct rsz_mult *multipass, ++ struct channel_config *rsz_conf_chan); ++static int rsz_set_ratio(struct rsz_mult *multipass, ++ struct channel_config *rsz_conf_chan); ++static void rsz_config_ratio(struct rsz_mult *multipass, ++ struct channel_config *rsz_conf_chan); ++ ++/** ++ * rsz_hardware_setup - Sets hardware configuration registers ++ * @rsz_conf_chan: Structure containing channel configuration ++ * ++ * Set hardware configuration registers ++ **/ ++static void rsz_hardware_setup(struct channel_config *rsz_conf_chan) ++{ ++ int coeffcounter; ++ int coeffoffset = 0; ++ ++ omap_writel(rsz_conf_chan->register_config.rsz_cnt, ++ OMAP3ISP_RESZ_REG(ISPRSZ_CNT)); ++ ++ omap_writel(rsz_conf_chan->register_config.rsz_in_start, ++ OMAP3ISP_RESZ_REG(ISPRSZ_IN_START)); ++ omap_writel(rsz_conf_chan->register_config.rsz_in_size, ++ OMAP3ISP_RESZ_REG(ISPRSZ_IN_SIZE)); ++ ++ omap_writel(rsz_conf_chan->register_config.rsz_out_size, ++ OMAP3ISP_RESZ_REG(ISPRSZ_OUT_SIZE)); ++ omap_writel(rsz_conf_chan->register_config.rsz_sdr_inadd, ++ OMAP3ISP_RESZ_REG(ISPRSZ_SDR_INADD)); ++ omap_writel(rsz_conf_chan->register_config.rsz_sdr_inoff, ++ OMAP3ISP_RESZ_REG(ISPRSZ_SDR_INOFF)); ++ omap_writel(rsz_conf_chan->register_config.rsz_sdr_outadd, ++ OMAP3ISP_RESZ_REG(ISPRSZ_SDR_OUTADD)); ++ omap_writel(rsz_conf_chan->register_config.rsz_sdr_outoff, ++ OMAP3ISP_RESZ_REG(ISPRSZ_SDR_OUTOFF)); ++ omap_writel(rsz_conf_chan->register_config.rsz_yehn, OMAP3ISP_RESZ_REG(ISPRSZ_YENH)); ++ ++ for (coeffcounter = 0; coeffcounter < MAX_COEF_COUNTER; ++ coeffcounter++) { ++ omap_writel(rsz_conf_chan->register_config. ++ rsz_coeff_horz[coeffcounter], ++ OMAP3ISP_RESZ_REG(ISPRSZ_HFILT10 ++ + coeffoffset)); ++ ++ omap_writel(rsz_conf_chan->register_config. ++ rsz_coeff_vert[coeffcounter], ++ OMAP3ISP_RESZ_REG(ISPRSZ_VFILT10 ++ + coeffoffset)); ++ coeffoffset = coeffoffset + COEFF_ADDRESS_OFFSET; ++ } ++} ++ ++/** ++ * rsz_start - Enables Resizer Wrapper ++ * @arg: Currently not used. ++ * @device: Structure containing ISP resizer wrapper global information ++ * ++ * Submits a resizing task specified by the rsz_resize structure. The call can ++ * either be blocked until the task is completed or returned immediately based ++ * on the value of the blocking argument in the rsz_resize structure. If it is ++ * blocking, the status of the task can be checked by calling ioctl ++ * RSZ_G_STATUS. Only one task can be outstanding for each logical channel. ++ * ++ * Returns 0 if successful, or -EINVAL if could not set callback for RSZR IRQ ++ * event or the state of the channel is not configured. ++ **/ ++int rsz_start(int *arg, struct rsz_fh *fh) ++{ ++ struct channel_config *rsz_conf_chan = fh->config; ++ struct rsz_mult *multipass = fh->multipass; ++ struct videobuf_queue *q = &fh->vbq; ++ int ret; ++ ++ if (rsz_conf_chan->config_state) { ++ dev_err(rsz_device, "State not configured \n"); ++ goto err_einval; ++ } ++ ++ rsz_conf_chan->status = CHANNEL_BUSY; ++ ++ rsz_hardware_setup(rsz_conf_chan); ++ ++ if (isp_set_callback(CBK_RESZ_DONE, rsz_isr, (void *) NULL, ++ (void *)NULL)) { ++ dev_err(rsz_device, "No callback for RSZR\n"); ++ goto err_einval; ++ } ++mult: ++ device_config->compl_isr.done = 0; ++ ++ ispresizer_enable(1); ++ ++ ret = wait_for_completion_interruptible(&device_config->compl_isr); ++ if (ret != 0) { ++ dev_dbg(rsz_device, "Unexpected exit from " ++ "wait_for_completion_interruptible\n"); ++ wait_for_completion(&device_config->compl_isr); ++ } ++ ++ if (multipass->active) { ++ rsz_set_multipass(multipass, rsz_conf_chan); ++ goto mult; ++ } ++ ++ if (fh->isp_addr_read) { ++ ispmmu_vunmap(fh->isp_addr_read); ++ fh->isp_addr_read = 0; ++ } ++ if (fh->isp_addr_write) { ++ ispmmu_vunmap(fh->isp_addr_write); ++ fh->isp_addr_write = 0; ++ } ++ ++ rsz_conf_chan->status = CHANNEL_FREE; ++ q->bufs[rsz_conf_chan->input_buf_index]->state = VIDEOBUF_NEEDS_INIT; ++ q->bufs[rsz_conf_chan->output_buf_index]->state = VIDEOBUF_NEEDS_INIT; ++ rsz_conf_chan->register_config.rsz_sdr_outadd = 0; ++ rsz_conf_chan->register_config.rsz_sdr_inadd = 0; ++ ++ /* Unmap and free the DMA memory allocated for buffers */ ++ videobuf_dma_unmap(q, videobuf_to_dma( ++ q->bufs[rsz_conf_chan->input_buf_index])); ++ videobuf_dma_unmap(q, videobuf_to_dma( ++ q->bufs[rsz_conf_chan->output_buf_index])); ++ videobuf_dma_free(videobuf_to_dma( ++ q->bufs[rsz_conf_chan->input_buf_index])); ++ videobuf_dma_free(videobuf_to_dma( ++ q->bufs[rsz_conf_chan->output_buf_index])); ++ ++ isp_unset_callback(CBK_RESZ_DONE); ++ ++ return 0; ++err_einval: ++ return -EINVAL; ++} ++ ++/** ++ * rsz_set_multipass - Set resizer multipass ++ * @rsz_conf_chan: Structure containing channel configuration ++ * ++ * Returns always 0 ++ **/ ++static int rsz_set_multipass(struct rsz_mult *multipass, ++ struct channel_config *rsz_conf_chan) ++{ ++ multipass->in_hsize = multipass->out_hsize; ++ multipass->in_vsize = multipass->out_vsize; ++ multipass->out_hsize = multipass->end_hsize; ++ multipass->out_vsize = multipass->end_vsize; ++ ++ multipass->out_pitch = (multipass->inptyp ? multipass->out_hsize ++ : (multipass->out_hsize * 2)); ++ multipass->in_pitch = (multipass->inptyp ? multipass->in_hsize ++ : (multipass->in_hsize * 2)); ++ ++ rsz_set_ratio(multipass, rsz_conf_chan); ++ rsz_config_ratio(multipass, rsz_conf_chan); ++ rsz_hardware_setup(rsz_conf_chan); ++ return 0; ++} ++ ++/** ++ * rsz_copy_data - Copy data ++ * @params: Structure containing the Resizer Wrapper parameters ++ * ++ * Copy data ++ **/ ++static void rsz_copy_data(struct rsz_mult *multipass, struct rsz_params *params) ++{ ++ int i; ++ multipass->in_hsize = params->in_hsize; ++ multipass->in_vsize = params->in_vsize; ++ multipass->out_hsize = params->out_hsize; ++ multipass->out_vsize = params->out_vsize; ++ multipass->end_hsize = params->out_hsize; ++ multipass->end_vsize = params->out_vsize; ++ multipass->in_pitch = params->in_pitch; ++ multipass->out_pitch = params->out_pitch; ++ multipass->hstph = params->hstph; ++ multipass->vstph = params->vstph; ++ multipass->inptyp = params->inptyp; ++ multipass->pix_fmt = params->pix_fmt; ++ multipass->cbilin = params->cbilin; ++ ++ for (i = 0; i < 32; i++) { ++ multipass->tap4filt_coeffs[i] = params->tap4filt_coeffs[i]; ++ multipass->tap7filt_coeffs[i] = params->tap7filt_coeffs[i]; ++ } ++} ++ ++/** ++ * rsz_set_params - Set parameters for resizer wrapper ++ * @params: Structure containing the Resizer Wrapper parameters ++ * @rsz_conf_chan: Structure containing channel configuration ++ * ++ * Used to set the parameters of the Resizer hardware, including input and ++ * output image size, horizontal and vertical poly-phase filter coefficients, ++ * luma enchancement filter coefficients, etc. ++ **/ ++static int rsz_set_params(struct rsz_mult *multipass, struct rsz_params *params, ++ struct channel_config *rsz_conf_chan) ++{ ++ int mul = 1; ++ if ((params->yenh_params.type < 0) || (params->yenh_params.type > 2)) { ++ dev_err(rsz_device, "rsz_set_params: Wrong yenh type\n"); ++ return -EINVAL; ++ } ++ if ((params->in_vsize <= 0) || (params->in_hsize <= 0) || ++ (params->out_vsize <= 0) || (params->out_hsize <= 0) || ++ (params->in_pitch <= 0) || (params->out_pitch <= 0)) { ++ dev_err(rsz_device, "rsz_set_params: Invalid size params\n"); ++ return -EINVAL; ++ } ++ if ((params->inptyp != RSZ_INTYPE_YCBCR422_16BIT) && ++ (params->inptyp != RSZ_INTYPE_PLANAR_8BIT)) { ++ dev_err(rsz_device, "rsz_set_params: Invalid input type\n"); ++ return -EINVAL; ++ } ++ if ((params->pix_fmt != RSZ_PIX_FMT_UYVY) && ++ (params->pix_fmt != RSZ_PIX_FMT_YUYV)) { ++ dev_err(rsz_device, "rsz_set_params: Invalid pixel format\n"); ++ return -EINVAL; ++ } ++ if (params->inptyp == RSZ_INTYPE_YCBCR422_16BIT) ++ mul = 2; ++ else ++ mul = 1; ++ if (params->in_pitch < (params->in_hsize * mul)) { ++ dev_err(rsz_device, "rsz_set_params: Pitch is incorrect\n"); ++ return -EINVAL; ++ } ++ if (params->out_pitch < (params->out_hsize * mul)) { ++ dev_err(rsz_device, "rsz_set_params: Out pitch cannot be less" ++ " than out hsize\n"); ++ return -EINVAL; ++ } ++ /* Output H size should be even */ ++ if ((params->out_hsize % PIXEL_EVEN) != 0) { ++ dev_err(rsz_device, "rsz_set_params: Output H size should" ++ " be even\n"); ++ return -EINVAL; ++ } ++ if (params->horz_starting_pixel < 0) { ++ dev_err(rsz_device, "rsz_set_params: Horz start pixel cannot" ++ " be less than zero\n"); ++ return -EINVAL; ++ } ++ ++ rsz_copy_data(multipass, params); ++ if (0 != rsz_set_ratio(multipass, rsz_conf_chan)) ++ goto err_einval; ++ ++ if (params->yenh_params.type) { ++ if ((multipass->num_htap && multipass->out_hsize > ++ 1280) || ++ (!multipass->num_htap && multipass->out_hsize > ++ 640)) ++ goto err_einval; ++ } ++ ++ if (INPUT_RAM) ++ params->vert_starting_pixel = 0; ++ ++ rsz_conf_chan->register_config.rsz_in_start = ++ (params->vert_starting_pixel ++ << ISPRSZ_IN_SIZE_VERT_SHIFT) ++ & ISPRSZ_IN_SIZE_VERT_MASK; ++ ++ if (params->inptyp == RSZ_INTYPE_PLANAR_8BIT) { ++ if (params->horz_starting_pixel > MAX_HORZ_PIXEL_8BIT) ++ goto err_einval; ++ } ++ if (params->inptyp == RSZ_INTYPE_YCBCR422_16BIT) { ++ if (params->horz_starting_pixel > MAX_HORZ_PIXEL_16BIT) ++ goto err_einval; ++ } ++ ++ rsz_conf_chan->register_config.rsz_in_start |= ++ params->horz_starting_pixel ++ & ISPRSZ_IN_START_HORZ_ST_MASK; ++ ++ rsz_conf_chan->register_config.rsz_yehn = ++ (params->yenh_params.type ++ << ISPRSZ_YENH_ALGO_SHIFT) ++ & ISPRSZ_YENH_ALGO_MASK; ++ ++ if (params->yenh_params.type) { ++ rsz_conf_chan->register_config.rsz_yehn |= ++ params->yenh_params.core ++ & ISPRSZ_YENH_CORE_MASK; ++ ++ rsz_conf_chan->register_config.rsz_yehn |= ++ (params->yenh_params.gain ++ << ISPRSZ_YENH_GAIN_SHIFT) ++ & ISPRSZ_YENH_GAIN_MASK; ++ ++ rsz_conf_chan->register_config.rsz_yehn |= ++ (params->yenh_params.slop ++ << ISPRSZ_YENH_SLOP_SHIFT) ++ & ISPRSZ_YENH_SLOP_MASK; ++ } ++ ++ rsz_config_ratio(multipass, rsz_conf_chan); ++ ++ rsz_conf_chan->config_state = STATE_CONFIGURED; ++ ++ return 0; ++err_einval: ++ return -EINVAL; ++} ++ ++/** ++ * rsz_set_ratio - Set ratio ++ * @rsz_conf_chan: Structure containing channel configuration ++ * ++ * Returns 0 if successful, -EINVAL if invalid output size, upscaling ratio is ++ * being requested, or other ratio configuration value is out of bounds ++ **/ ++static int rsz_set_ratio(struct rsz_mult *multipass, ++ struct channel_config *rsz_conf_chan) ++{ ++ int alignment = 0; ++ ++ rsz_conf_chan->register_config.rsz_cnt = 0; ++ ++ if ((multipass->out_hsize > MAX_IMAGE_WIDTH) || ++ (multipass->out_vsize > MAX_IMAGE_WIDTH)) { ++ dev_err(rsz_device, "Invalid output size!"); ++ goto err_einval; ++ } ++ if (multipass->cbilin) { ++ rsz_conf_chan->register_config.rsz_cnt = ++ BITSET(rsz_conf_chan->register_config.rsz_cnt, ++ SET_BIT_CBLIN); ++ } ++ if (INPUT_RAM) { ++ rsz_conf_chan->register_config.rsz_cnt = ++ BITSET(rsz_conf_chan->register_config.rsz_cnt, ++ SET_BIT_INPUTRAM); ++ } ++ if (multipass->inptyp == RSZ_INTYPE_PLANAR_8BIT) { ++ rsz_conf_chan->register_config.rsz_cnt = ++ BITSET(rsz_conf_chan->register_config.rsz_cnt, ++ SET_BIT_INPTYP); ++ } else { ++ rsz_conf_chan->register_config.rsz_cnt = ++ BITRESET(rsz_conf_chan->register_config. ++ rsz_cnt, SET_BIT_INPTYP); ++ ++ if (multipass->pix_fmt == RSZ_PIX_FMT_UYVY) { ++ rsz_conf_chan->register_config.rsz_cnt = ++ BITRESET(rsz_conf_chan->register_config. ++ rsz_cnt, SET_BIT_YCPOS); ++ } else if (multipass->pix_fmt == RSZ_PIX_FMT_YUYV) { ++ rsz_conf_chan->register_config.rsz_cnt = ++ BITSET(rsz_conf_chan->register_config. ++ rsz_cnt, SET_BIT_YCPOS); ++ } ++ ++ } ++ multipass->vrsz = ++ (multipass->in_vsize * RATIO_MULTIPLIER) / multipass->out_vsize; ++ multipass->hrsz = ++ (multipass->in_hsize * RATIO_MULTIPLIER) / multipass->out_hsize; ++ if (UP_RSZ_RATIO > multipass->vrsz || UP_RSZ_RATIO > multipass->hrsz) { ++ dev_err(rsz_device, "Upscaling ratio not supported!"); ++ goto err_einval; ++ } ++ multipass->vrsz = (multipass->in_vsize - NUM_D2TAPS) * RATIO_MULTIPLIER ++ / (multipass->out_vsize - 1); ++ multipass->hrsz = ((multipass->in_hsize - NUM_D2TAPS) ++ * RATIO_MULTIPLIER) / ++ (multipass->out_hsize - 1); ++ ++ if (multipass->hrsz <= 512) { ++ multipass->hrsz = (multipass->in_hsize - NUM_TAPS) ++ * RATIO_MULTIPLIER ++ / (multipass->out_hsize - 1); ++ if (multipass->hrsz < 64) ++ multipass->hrsz = 64; ++ if (multipass->hrsz > 512) ++ multipass->hrsz = 512; ++ if (multipass->hstph > NUM_PHASES) ++ goto err_einval; ++ multipass->num_htap = 1; ++ } else if (multipass->hrsz >= 513 && multipass->hrsz <= 1024) { ++ if (multipass->hstph > NUM_D2PH) ++ goto err_einval; ++ multipass->num_htap = 0; ++ } ++ ++ if (multipass->vrsz <= 512) { ++ multipass->vrsz = (multipass->in_vsize - NUM_TAPS) ++ * RATIO_MULTIPLIER ++ / (multipass->out_vsize - 1); ++ if (multipass->vrsz < 64) ++ multipass->vrsz = 64; ++ if (multipass->vrsz > 512) ++ multipass->vrsz = 512; ++ if (multipass->vstph > NUM_PHASES) ++ goto err_einval; ++ multipass->num_vtap = 1; ++ } else if (multipass->vrsz >= 513 && multipass->vrsz <= 1024) { ++ if (multipass->vstph > NUM_D2PH) ++ goto err_einval; ++ multipass->num_vtap = 0; ++ } ++ ++ if ((multipass->in_pitch) % ALIGN32) { ++ dev_err(rsz_device, "Invalid input pitch: %d \n", ++ multipass->in_pitch); ++ goto err_einval; ++ } ++ if ((multipass->out_pitch) % ALIGN32) { ++ dev_err(rsz_device, "Invalid output pitch %d \n", ++ multipass->out_pitch); ++ goto err_einval; ++ } ++ ++ if (multipass->vrsz < 256 && ++ (multipass->in_vsize < multipass->out_vsize)) { ++ if (multipass->inptyp == RSZ_INTYPE_PLANAR_8BIT) ++ alignment = ALIGNMENT; ++ else if (multipass->inptyp == RSZ_INTYPE_YCBCR422_16BIT) ++ alignment = (ALIGNMENT / 2); ++ else ++ dev_err(rsz_device, "Invalid input type\n"); ++ ++ if (!(((multipass->out_hsize % PIXEL_EVEN) == 0) ++ && (multipass->out_hsize % alignment) == 0)) { ++ dev_err(rsz_device, "wrong hsize\n"); ++ goto err_einval; ++ } ++ } ++ if (multipass->hrsz >= 64 && multipass->hrsz <= 1024) { ++ if (multipass->out_hsize > MAX_IMAGE_WIDTH) { ++ dev_err(rsz_device, "wrong width\n"); ++ goto err_einval; ++ } ++ multipass->active = 0; ++ ++ } else if (multipass->hrsz > 1024) { ++ if (multipass->out_hsize > MAX_IMAGE_WIDTH) { ++ dev_err(rsz_device, "wrong width\n"); ++ goto err_einval; ++ } ++ if (multipass->hstph > NUM_D2PH) ++ goto err_einval; ++ multipass->num_htap = 0; ++ multipass->out_hsize = multipass->in_hsize * 256 / 1024; ++ if (multipass->out_hsize % ALIGN32) { ++ multipass->out_hsize += ++ abs((multipass->out_hsize % ALIGN32) - ALIGN32); ++ } ++ multipass->out_pitch = ((multipass->inptyp) ? ++ multipass->out_hsize : ++ (multipass->out_hsize * 2)); ++ multipass->hrsz = ((multipass->in_hsize - NUM_D2TAPS) ++ * RATIO_MULTIPLIER) ++ / (multipass->out_hsize - 1); ++ multipass->active = 1; ++ ++ } ++ ++ if (multipass->vrsz > 1024) { ++ if (multipass->out_vsize > MAX_IMAGE_WIDTH_HIGH) { ++ dev_err(rsz_device, "wrong width\n"); ++ goto err_einval; ++ } ++ ++ multipass->out_vsize = multipass->in_vsize * 256 / 1024; ++ multipass->vrsz = ((multipass->in_vsize - NUM_D2TAPS) ++ * RATIO_MULTIPLIER) ++ / (multipass->out_vsize - 1); ++ multipass->active = 1; ++ multipass->num_vtap = 0; ++ ++ } ++ rsz_conf_chan->register_config.rsz_out_size = ++ multipass->out_hsize ++ & ISPRSZ_OUT_SIZE_HORZ_MASK; ++ ++ rsz_conf_chan->register_config.rsz_out_size |= ++ (multipass->out_vsize ++ << ISPRSZ_OUT_SIZE_VERT_SHIFT) ++ & ISPRSZ_OUT_SIZE_VERT_MASK; ++ ++ rsz_conf_chan->register_config.rsz_sdr_inoff = ++ multipass->in_pitch ++ & ISPRSZ_SDR_INOFF_OFFSET_MASK; ++ ++ rsz_conf_chan->register_config.rsz_sdr_outoff = ++ multipass->out_pitch ++ & ISPRSZ_SDR_OUTOFF_OFFSET_MASK; ++ ++ if (multipass->hrsz >= 64 && multipass->hrsz <= 512) { ++ if (multipass->hstph > NUM_PHASES) ++ goto err_einval; ++ } else if (multipass->hrsz >= 64 && multipass->hrsz <= 512) { ++ if (multipass->hstph > NUM_D2PH) ++ goto err_einval; ++ } ++ ++ rsz_conf_chan->register_config.rsz_cnt |= ++ (multipass->hstph ++ << ISPRSZ_CNT_HSTPH_SHIFT) ++ & ISPRSZ_CNT_HSTPH_MASK; ++ ++ if (multipass->vrsz >= 64 && multipass->hrsz <= 512) { ++ if (multipass->vstph > NUM_PHASES) ++ goto err_einval; ++ } else if (multipass->vrsz >= 64 && multipass->vrsz <= 512) { ++ if (multipass->vstph > NUM_D2PH) ++ goto err_einval; ++ } ++ ++ rsz_conf_chan->register_config.rsz_cnt |= ++ (multipass->vstph ++ << ISPRSZ_CNT_VSTPH_SHIFT) ++ & ISPRSZ_CNT_VSTPH_MASK; ++ ++ rsz_conf_chan->register_config.rsz_cnt |= ++ (multipass->hrsz - 1) ++ & ISPRSZ_CNT_HRSZ_MASK; ++ ++ rsz_conf_chan->register_config.rsz_cnt |= ++ ((multipass->vrsz - 1) ++ << ISPRSZ_CNT_VRSZ_SHIFT) ++ & ISPRSZ_CNT_VRSZ_MASK; ++ ++ return 0; ++err_einval: ++ return -EINVAL; ++} ++ ++/** ++ * rsz_config_ratio - Configure ratio ++ * @rsz_conf_chan: Structure containing channel configuration ++ * ++ * Configure ratio ++ **/ ++static void rsz_config_ratio(struct rsz_mult *multipass, ++ struct channel_config *rsz_conf_chan) ++{ ++ int hsize; ++ int vsize; ++ int coeffcounter; ++ ++ if (multipass->hrsz <= 512) { ++ hsize = ((32 * multipass->hstph + (multipass->out_hsize - 1) ++ * multipass->hrsz + 16) >> 8) + 7; ++ } else { ++ hsize = ((64 * multipass->hstph + (multipass->out_hsize - 1) ++ * multipass->hrsz + 32) >> 8) + 7; ++ } ++ if (multipass->vrsz <= 512) { ++ vsize = ((32 * multipass->vstph + (multipass->out_vsize - 1) ++ * multipass->vrsz + 16) >> 8) + 4; ++ } else { ++ vsize = ((64 * multipass->vstph + (multipass->out_vsize - 1) ++ * multipass->vrsz + 32) >> 8) + 7; ++ } ++ rsz_conf_chan->register_config.rsz_in_size = hsize; ++ ++ rsz_conf_chan->register_config.rsz_in_size |= ++ ((vsize << ISPRSZ_IN_SIZE_VERT_SHIFT) ++ & ISPRSZ_IN_SIZE_VERT_MASK); ++ ++ for (coeffcounter = 0; coeffcounter < MAX_COEF_COUNTER; ++ coeffcounter++) { ++ if (multipass->num_htap) { ++ rsz_conf_chan->register_config. ++ rsz_coeff_horz[coeffcounter] = ++ (multipass->tap4filt_coeffs[2 ++ * coeffcounter] ++ & ISPRSZ_HFILT10_COEF0_MASK); ++ rsz_conf_chan->register_config. ++ rsz_coeff_horz[coeffcounter] |= ++ ((multipass->tap4filt_coeffs[2 ++ * coeffcounter + 1] ++ << ISPRSZ_HFILT10_COEF1_SHIFT) ++ & ISPRSZ_HFILT10_COEF1_MASK); ++ } else { ++ rsz_conf_chan->register_config. ++ rsz_coeff_horz[coeffcounter] = ++ (multipass->tap7filt_coeffs[2 ++ * coeffcounter] ++ & ISPRSZ_HFILT10_COEF0_MASK); ++ ++ rsz_conf_chan->register_config. ++ rsz_coeff_horz[coeffcounter] |= ++ ((multipass->tap7filt_coeffs[2 ++ * coeffcounter + 1] ++ << ISPRSZ_HFILT10_COEF1_SHIFT) ++ & ISPRSZ_HFILT10_COEF1_MASK); ++ } ++ ++ if (multipass->num_vtap) { ++ rsz_conf_chan->register_config. ++ rsz_coeff_vert[coeffcounter] = ++ (multipass->tap4filt_coeffs[2 ++ * coeffcounter] ++ & ISPRSZ_VFILT10_COEF0_MASK); ++ ++ rsz_conf_chan->register_config. ++ rsz_coeff_vert[coeffcounter] |= ++ ((multipass->tap4filt_coeffs[2 ++ * coeffcounter + 1] ++ << ISPRSZ_VFILT10_COEF1_SHIFT) & ++ ISPRSZ_VFILT10_COEF1_MASK); ++ } else { ++ rsz_conf_chan->register_config. ++ rsz_coeff_vert[coeffcounter] = ++ (multipass->tap7filt_coeffs[2 ++ * coeffcounter] ++ & ISPRSZ_VFILT10_COEF0_MASK); ++ rsz_conf_chan->register_config. ++ rsz_coeff_vert[coeffcounter] |= ++ ((multipass->tap7filt_coeffs[2 ++ * coeffcounter + 1] ++ << ISPRSZ_VFILT10_COEF1_SHIFT) ++ & ISPRSZ_VFILT10_COEF1_MASK); ++ } ++ } ++} ++ ++/** ++ * rsz_get_params - Gets the parameter values ++ * @params: Structure containing the Resizer Wrapper parameters ++ * @rsz_conf_chan: Structure containing channel configuration ++ * ++ * Used to get the Resizer hardware settings associated with the ++ * current logical channel represented by fd. ++ **/ ++static int rsz_get_params(struct rsz_params *params, ++ struct channel_config *rsz_conf_chan) ++{ ++ int coeffcounter; ++ ++ if (rsz_conf_chan->config_state) { ++ dev_err(rsz_device, "state not configured\n"); ++ return -EINVAL; ++ } ++ ++ params->in_hsize = rsz_conf_chan->register_config.rsz_in_size ++ & ISPRSZ_IN_SIZE_HORZ_MASK; ++ params->in_vsize = (rsz_conf_chan->register_config.rsz_in_size ++ & ISPRSZ_IN_SIZE_VERT_MASK) ++ >> ISPRSZ_IN_SIZE_VERT_SHIFT; ++ ++ params->in_pitch = rsz_conf_chan->register_config.rsz_sdr_inoff ++ & ISPRSZ_SDR_INOFF_OFFSET_MASK; ++ ++ params->out_hsize = rsz_conf_chan->register_config.rsz_out_size ++ & ISPRSZ_OUT_SIZE_HORZ_MASK; ++ ++ params->out_vsize = (rsz_conf_chan->register_config.rsz_out_size ++ & ISPRSZ_OUT_SIZE_VERT_MASK) ++ >> ISPRSZ_OUT_SIZE_VERT_SHIFT; ++ ++ params->out_pitch = rsz_conf_chan->register_config.rsz_sdr_outoff ++ & ISPRSZ_SDR_OUTOFF_OFFSET_MASK; ++ ++ params->cbilin = (rsz_conf_chan->register_config.rsz_cnt ++ & SET_BIT_CBLIN) >> SET_BIT_CBLIN; ++ ++ params->inptyp = (rsz_conf_chan->register_config.rsz_cnt ++ & ISPRSZ_CNT_INPTYP_MASK) ++ >> SET_BIT_INPTYP; ++ params->horz_starting_pixel = ((rsz_conf_chan->register_config. ++ rsz_in_start ++ & ISPRSZ_IN_START_HORZ_ST_MASK)); ++ params->vert_starting_pixel = ((rsz_conf_chan->register_config. ++ rsz_in_start ++ & ISPRSZ_IN_START_VERT_ST_MASK) ++ >> ISPRSZ_IN_START_VERT_ST_SHIFT); ++ ++ params->hstph = ((rsz_conf_chan->register_config.rsz_cnt ++ & ISPRSZ_CNT_HSTPH_MASK ++ >> ISPRSZ_CNT_HSTPH_SHIFT)); ++ params->vstph = ((rsz_conf_chan->register_config.rsz_cnt ++ & ISPRSZ_CNT_VSTPH_MASK ++ >> ISPRSZ_CNT_VSTPH_SHIFT)); ++ ++ for (coeffcounter = 0; coeffcounter < MAX_COEF_COUNTER; ++ coeffcounter++) { ++ params->tap4filt_coeffs[2 * coeffcounter] = ++ rsz_conf_chan->register_config. ++ rsz_coeff_horz[coeffcounter] ++ & ISPRSZ_HFILT10_COEF0_MASK; ++ ++ params->tap4filt_coeffs[2 * coeffcounter + 1] = ++ (rsz_conf_chan->register_config. ++ rsz_coeff_horz[coeffcounter] ++ & ISPRSZ_HFILT10_COEF1_MASK) ++ >> ISPRSZ_HFILT10_COEF1_SHIFT; ++ ++ params->tap7filt_coeffs[2 * coeffcounter] = ++ rsz_conf_chan->register_config. ++ rsz_coeff_vert[coeffcounter] ++ & ISPRSZ_VFILT10_COEF0_MASK; ++ ++ params->tap7filt_coeffs[2 * coeffcounter + 1] = ++ (rsz_conf_chan->register_config. ++ rsz_coeff_vert[coeffcounter] ++ & ISPRSZ_VFILT10_COEF1_MASK) ++ >> ISPRSZ_VFILT10_COEF1_SHIFT; ++ ++ } ++ ++ params->yenh_params.type = (rsz_conf_chan->register_config.rsz_yehn ++ & ISPRSZ_YENH_ALGO_MASK) ++ >> ISPRSZ_YENH_ALGO_SHIFT; ++ ++ params->yenh_params.core = rsz_conf_chan->register_config.rsz_yehn ++ & ISPRSZ_YENH_CORE_MASK; ++ ++ params->yenh_params.gain = (rsz_conf_chan->register_config.rsz_yehn ++ & ISPRSZ_YENH_GAIN_MASK) ++ >> ISPRSZ_YENH_GAIN_SHIFT; ++ ++ params->yenh_params.slop = (rsz_conf_chan->register_config.rsz_yehn ++ & ISPRSZ_YENH_SLOP_MASK) ++ >> ISPRSZ_YENH_SLOP_SHIFT; ++ ++ params->pix_fmt = ((rsz_conf_chan->register_config.rsz_cnt ++ & ISPRSZ_CNT_PIXFMT_MASK) ++ >> SET_BIT_YCPOS); ++ ++ if (params->pix_fmt) ++ params->pix_fmt = RSZ_PIX_FMT_UYVY; ++ else ++ params->pix_fmt = RSZ_PIX_FMT_YUYV; ++ ++ return 0; ++} ++ ++/** ++ * rsz_calculate_crop - Calculate Crop values ++ * @rsz_conf_chan: Structure containing channel configuration ++ * @cropsize: Structure containing crop parameters ++ * ++ * Calculate Crop values ++ **/ ++static void rsz_calculate_crop(struct channel_config *rsz_conf_chan, ++ struct rsz_cropsize *cropsize) ++{ ++ int luma_enable; ++ ++ cropsize->hcrop = 0; ++ cropsize->vcrop = 0; ++ ++ luma_enable = (rsz_conf_chan->register_config.rsz_yehn ++ & ISPRSZ_YENH_ALGO_MASK) ++ >> ISPRSZ_YENH_ALGO_SHIFT; ++ ++ if (luma_enable) ++ cropsize->hcrop += 2; ++} ++ ++/** ++ * rsz_vbq_release - Videobuffer queue release ++ * @q: Structure containing the videobuffer queue file handle, and device ++ * structure which contains the actual configuration. ++ * @vb: Structure containing the videobuffer used for resizer processing. ++ **/ ++static void rsz_vbq_release(struct videobuf_queue *q, ++ struct videobuf_buffer *vb) ++{ ++ int i; ++ struct rsz_fh *fh = q->priv_data; ++ ++ for (i = 0; i < VIDEO_MAX_FRAME; i++) { ++ struct videobuf_dmabuf *dma = NULL; ++ if (!q->bufs[i]) ++ continue; ++ if (q->bufs[i]->memory != V4L2_MEMORY_MMAP) ++ continue; ++ dma = videobuf_to_dma(q->bufs[i]); ++ videobuf_dma_unmap(q, dma); ++ videobuf_dma_free(dma); ++ } ++ ++ ispmmu_vunmap(fh->isp_addr_read); ++ ispmmu_vunmap(fh->isp_addr_write); ++ fh->isp_addr_read = 0; ++ fh->isp_addr_write = 0; ++ spin_lock(&fh->vbq_lock); ++ vb->state = VIDEOBUF_NEEDS_INIT; ++ spin_unlock(&fh->vbq_lock); ++ ++} ++ ++/** ++ * rsz_vbq_setup - Sets up the videobuffer size and validates count. ++ * @q: Structure containing the videobuffer queue file handle, and device ++ * structure which contains the actual configuration. ++ * @cnt: Number of buffers requested ++ * @size: Size in bytes of the buffer used for previewing ++ * ++ * Always returns 0. ++ **/ ++static int rsz_vbq_setup(struct videobuf_queue *q, unsigned int *cnt, ++ unsigned int *size) ++{ ++ struct rsz_fh *fh = q->priv_data; ++ struct rsz_mult *multipass = fh->multipass; ++ u32 insize, outsize; ++ ++ spin_lock(&fh->vbq_lock); ++ if (*cnt <= 0) ++ *cnt = VIDEO_MAX_FRAME; ++ ++ if (*cnt > VIDEO_MAX_FRAME) ++ *cnt = VIDEO_MAX_FRAME; ++ ++ outsize = multipass->out_pitch * multipass->out_vsize; ++ insize = multipass->in_pitch * multipass->in_vsize; ++ if (*cnt == 1 && (outsize > insize)) { ++ dev_err(rsz_device, "2 buffers are required for Upscaling " ++ "mode\n"); ++ goto err_einval; ++ } ++ if (!fh->params->in_hsize || !fh->params->in_vsize) { ++ dev_err(rsz_device, "Can't setup buffer size\n"); ++ goto err_einval; ++ } else { ++ if (outsize > insize) ++ *size = outsize; ++ else ++ *size = insize; ++ ++ fh->rsz_bufsize = *size; ++ } ++ spin_unlock(&fh->vbq_lock); ++ ++ return 0; ++err_einval: ++ spin_unlock(&fh->vbq_lock); ++ return -EINVAL; ++} ++ ++/** ++ * rsz_vbq_prepare - Videobuffer is prepared and mmapped. ++ * @q: Structure containing the videobuffer queue file handle, and device ++ * structure which contains the actual configuration. ++ * @vb: Structure containing the videobuffer used for resizer processing. ++ * @field: Type of field to set in videobuffer device. ++ * ++ * Returns 0 if successful, or -EINVAL if buffer couldn't get allocated, or ++ * -EIO if the ISP MMU mapping fails ++ **/ ++static int rsz_vbq_prepare(struct videobuf_queue *q, ++ struct videobuf_buffer *vb, ++ enum v4l2_field field) ++{ ++ struct rsz_fh *fh = q->priv_data; ++ struct channel_config *rsz_conf_chan = fh->config; ++ struct rsz_mult *multipass = fh->multipass; ++ int err = 0; ++ unsigned int isp_addr, insize, outsize; ++ struct videobuf_dmabuf *dma = videobuf_to_dma(vb); ++ ++ spin_lock(&fh->vbq_lock); ++ if (vb->baddr) { ++ vb->size = fh->rsz_bufsize; ++ vb->bsize = fh->rsz_bufsize; ++ } else { ++ spin_unlock(&fh->vbq_lock); ++ dev_err(rsz_device, "No user buffer allocated\n"); ++ goto out; ++ } ++ if (vb->i) { ++ vb->width = fh->params->out_hsize; ++ vb->height = fh->params->out_vsize; ++ } else { ++ vb->width = fh->params->in_hsize; ++ vb->height = fh->params->in_vsize; ++ } ++ ++ vb->field = field; ++ spin_unlock(&fh->vbq_lock); ++ ++ if (vb->state == VIDEOBUF_NEEDS_INIT) { ++ err = videobuf_iolock(q, vb, NULL); ++ if (!err) { ++ isp_addr = ispmmu_vmap(dma->sglist, dma->sglen); ++ if (!isp_addr) ++ err = -EIO; ++ else { ++ if (vb->i) { ++ rsz_conf_chan->register_config. ++ rsz_sdr_outadd ++ = isp_addr; ++ fh->isp_addr_write = isp_addr; ++ rsz_conf_chan->output_buf_index = vb->i; ++ } else { ++ rsz_conf_chan->register_config. ++ rsz_sdr_inadd ++ = isp_addr; ++ rsz_conf_chan->input_buf_index = vb->i; ++ outsize = multipass->out_pitch * ++ multipass->out_vsize; ++ insize = multipass->in_pitch * ++ multipass->in_vsize; ++ if (outsize < insize) { ++ rsz_conf_chan->register_config. ++ rsz_sdr_outadd ++ = isp_addr; ++ rsz_conf_chan-> ++ output_buf_index = ++ vb->i; ++ } ++ ++ fh->isp_addr_read = isp_addr; ++ } ++ } ++ } ++ ++ } ++ ++ if (!err) { ++ spin_lock(&fh->vbq_lock); ++ vb->state = VIDEOBUF_PREPARED; ++ spin_unlock(&fh->vbq_lock); ++ flush_cache_user_range(NULL, vb->baddr, (vb->baddr ++ + vb->bsize)); ++ } else ++ rsz_vbq_release(q, vb); ++ ++out: ++ return err; ++} ++ ++static void rsz_vbq_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) ++{ ++ return; ++} ++ ++/** ++ * rsz_open - Initializes and opens the Resizer Wrapper ++ * @inode: Inode structure associated with the Resizer Wrapper ++ * @filp: File structure associated with the Resizer Wrapper ++ * ++ * Returns 0 if successful, -EBUSY if its already opened or the ISP module is ++ * not available, or -ENOMEM if its unable to allocate the device in kernel ++ * space memory. ++ **/ ++static int rsz_open(struct inode *inode, struct file *filp) ++{ ++ int ret = 0; ++ struct channel_config *rsz_conf_chan; ++ struct rsz_fh *fh; ++ struct device_params *device = device_config; ++ struct rsz_params *params; ++ struct rsz_mult *multipass; ++ ++ if ((filp->f_flags & O_NONBLOCK) == O_NONBLOCK) { ++ printk(KERN_DEBUG "omap-resizer: Device is opened in " ++ "non blocking mode\n"); ++ } else { ++ printk(KERN_DEBUG "omap-resizer: Device is opened in blocking " ++ "mode\n"); ++ } ++ fh = kzalloc(sizeof(struct rsz_fh), GFP_KERNEL); ++ if (NULL == fh) ++ return -ENOMEM; ++ ++ isp_get(); ++ ++ rsz_conf_chan = kzalloc(sizeof(struct channel_config), GFP_KERNEL); ++ if (rsz_conf_chan == NULL) { ++ dev_err(rsz_device, "\n cannot allocate memory to config"); ++ ret = -ENOMEM; ++ goto err_enomem0; ++ } ++ params = kzalloc(sizeof(struct rsz_params), GFP_KERNEL); ++ if (params == NULL) { ++ dev_err(rsz_device, "\n cannot allocate memory to params"); ++ ret = -ENOMEM; ++ goto err_enomem1; ++ } ++ multipass = kzalloc(sizeof(struct rsz_mult), GFP_KERNEL); ++ if (multipass == NULL) { ++ dev_err(rsz_device, "\n cannot allocate memory to multipass"); ++ ret = -ENOMEM; ++ goto err_enomem2; ++ } ++ ++ fh->multipass = multipass; ++ fh->params = params; ++ fh->config = rsz_conf_chan; ++ ++ if (mutex_lock_interruptible(&device->reszwrap_mutex)) { ++ ret = -EINTR; ++ goto err_enomem2; ++ } ++ device->opened++; ++ mutex_unlock(&device->reszwrap_mutex); ++ ++ rsz_conf_chan->config_state = STATE_NOT_CONFIGURED; ++ rsz_conf_chan->status = CHANNEL_FREE; ++ ++ filp->private_data = fh; ++ fh->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; ++ fh->device = device; ++ ++ videobuf_queue_sg_init(&fh->vbq, &device->vbq_ops, NULL, ++ &fh->vbq_lock, fh->type, ++ V4L2_FIELD_NONE, ++ sizeof(struct videobuf_buffer), fh); ++ ++ spin_lock_init(&fh->vbq_lock); ++ mutex_init(&rsz_conf_chan->chanprotection_mutex); ++ ++ return 0; ++err_enomem2: ++ kfree(params); ++err_enomem1: ++ kfree(rsz_conf_chan); ++err_enomem0: ++ kfree(fh); ++ return ret; ++} ++ ++/** ++ * rsz_release - Releases Resizer Wrapper and frees up allocated memory ++ * @inode: Inode structure associated with the Resizer Wrapper ++ * @filp: File structure associated with the Resizer Wrapper ++ * ++ * Returns 0 if successful, or -EBUSY if channel is being used. ++ **/ ++static int rsz_release(struct inode *inode, struct file *filp) ++{ ++ u32 timeout = 0; ++ struct rsz_fh *fh = filp->private_data; ++ struct channel_config *rsz_conf_chan = fh->config; ++ struct rsz_params *params = fh->params; ++ struct rsz_mult *multipass = fh->multipass; ++ struct videobuf_queue *q = &fh->vbq; ++ ++ while ((rsz_conf_chan->status != CHANNEL_FREE) && (timeout < 20)) { ++ timeout++; ++ schedule(); ++ } ++ if (mutex_lock_interruptible(&device_config->reszwrap_mutex)) ++ return -EINTR; ++ device_config->opened--; ++ mutex_unlock(&device_config->reszwrap_mutex); ++ /* This will Free memory allocated to the buffers, ++ * and flushes the queue ++ */ ++ videobuf_queue_cancel(q); ++ fh->params = NULL; ++ fh->config = NULL; ++ ++ fh->rsz_bufsize = 0; ++ filp->private_data = NULL; ++ ++ kfree(rsz_conf_chan); ++ kfree(params); ++ kfree(multipass); ++ kfree(fh); ++ ++ isp_put(); ++ ++ return 0; ++} ++ ++/** ++ * rsz_mmap - Memory maps the Resizer Wrapper module. ++ * @file: File structure associated with the Resizer Wrapper ++ * @vma: Virtual memory area structure. ++ * ++ * Returns 0 if successful, or returned value by the videobuf_mmap_mapper() ++ * function. ++ **/ ++static int rsz_mmap(struct file *file, struct vm_area_struct *vma) ++{ ++ struct rsz_fh *fh = file->private_data; ++ ++ return videobuf_mmap_mapper(&fh->vbq, vma); ++} ++ ++/** ++ * rsz_ioctl - I/O control function for Resizer Wrapper ++ * @inode: Inode structure associated with the Resizer Wrapper. ++ * @file: File structure associated with the Resizer Wrapper. ++ * @cmd: Type of command to execute. ++ * @arg: Argument to send to requested command. ++ * ++ * Returns 0 if successful, -EBUSY if channel is being used, -1 if bad command ++ * passed or access is denied, -EFAULT if copy_from_user() or copy_to_user() ++ * fails, -EINVAL if parameter validation fails or parameter structure is not ++ * present. ++ **/ ++static long rsz_unlocked_ioctl(struct file *file, unsigned int cmd, ++ unsigned long arg) ++{ ++ int ret = 0; ++ struct rsz_fh *fh = file->private_data; ++ struct device_params *device = fh->device; ++ struct channel_config *rsz_conf_chan = fh->config; ++ ++ if ((_IOC_TYPE(cmd) != RSZ_IOC_BASE) ++ || (_IOC_NR(cmd) > RSZ_IOC_MAXNR)) { ++ dev_err(rsz_device, "Bad command value \n"); ++ return -1; ++ } ++ ++ if (_IOC_DIR(cmd) & _IOC_READ) ++ ret = !access_ok(VERIFY_WRITE, (void *)arg, _IOC_SIZE(cmd)); ++ else if (_IOC_DIR(cmd) & _IOC_WRITE) ++ ret = !access_ok(VERIFY_READ, (void *)arg, _IOC_SIZE(cmd)); ++ ++ if (ret) { ++ dev_err(rsz_device, "Access denied\n"); ++ return -1; ++ } ++ ++ switch (cmd) { ++ case RSZ_REQBUF: ++ { ++ struct v4l2_requestbuffers req_buf; ++ if (copy_from_user(&req_buf, (struct v4l2_requestbuffers *)arg, ++ sizeof(struct v4l2_requestbuffers))) { ++ return -EFAULT; ++ } ++ if (mutex_lock_interruptible(&rsz_conf_chan-> ++ chanprotection_mutex)) ++ return -EINTR; ++ ret = videobuf_reqbufs(&fh->vbq, (void *)&req_buf); ++ mutex_unlock(&rsz_conf_chan->chanprotection_mutex); ++ break; ++ } ++ case RSZ_QUERYBUF: ++ { ++ struct v4l2_buffer buf; ++ if (copy_from_user(&buf, (struct v4l2_buffer *)arg, ++ sizeof(struct v4l2_buffer))) { ++ return -EFAULT; ++ } ++ if (mutex_lock_interruptible(&rsz_conf_chan-> ++ chanprotection_mutex)) ++ return -EINTR; ++ ret = videobuf_querybuf(&fh->vbq, (void *)&buf); ++ mutex_unlock(&rsz_conf_chan->chanprotection_mutex); ++ if (copy_to_user((struct v4l2_buffer *)arg, &buf, ++ sizeof(struct v4l2_buffer))) ++ return -EFAULT; ++ break; ++ } ++ case RSZ_QUEUEBUF: ++ { ++ struct v4l2_buffer buf; ++ if (copy_from_user(&buf, (struct v4l2_buffer *)arg, ++ sizeof(struct v4l2_buffer))) { ++ return -EFAULT; ++ } ++ if (mutex_lock_interruptible(&rsz_conf_chan-> ++ chanprotection_mutex)) ++ return -EINTR; ++ ret = videobuf_qbuf(&fh->vbq, (void *)&buf); ++ mutex_unlock(&rsz_conf_chan->chanprotection_mutex); ++ break; ++ } ++ case RSZ_S_PARAM: ++ { ++ struct rsz_params *params = fh->params; ++ if (copy_from_user(params, (struct rsz_params *)arg, ++ sizeof(struct rsz_params))) { ++ return -EFAULT; ++ } ++ if (mutex_lock_interruptible(&rsz_conf_chan-> ++ chanprotection_mutex)) ++ return -EINTR; ++ ret = rsz_set_params(fh->multipass, params, rsz_conf_chan); ++ mutex_unlock(&rsz_conf_chan->chanprotection_mutex); ++ break; ++ } ++ case RSZ_G_PARAM: ++ ret = rsz_get_params((struct rsz_params *)arg, rsz_conf_chan); ++ break; ++ ++ case RSZ_G_STATUS: ++ { ++ struct rsz_status *status; ++ status = (struct rsz_status *)arg; ++ status->chan_busy = rsz_conf_chan->status; ++ status->hw_busy = ispresizer_busy(); ++ status->src = INPUT_RAM; ++ break; ++ } ++ case RSZ_RESIZE: ++ if (file->f_flags & O_NONBLOCK) { ++ if (ispresizer_busy()) ++ return -EBUSY; ++ else { ++ if (!mutex_trylock(&device->reszwrap_mutex)) ++ return -EBUSY; ++ } ++ } else { ++ if (mutex_lock_interruptible(&device->reszwrap_mutex)) ++ return -EINTR; ++ } ++ ret = rsz_start((int *)arg, fh); ++ mutex_unlock(&device->reszwrap_mutex); ++ break; ++ case RSZ_GET_CROPSIZE: ++ rsz_calculate_crop(rsz_conf_chan, (struct rsz_cropsize *)arg); ++ break; ++ ++ default: ++ dev_err(rsz_device, "resizer_ioctl: Invalid Command Value"); ++ return -EINVAL; ++ } ++ ++ return (long)ret; ++} ++ ++static struct file_operations rsz_fops = { ++ .owner = THIS_MODULE, ++ .open = rsz_open, ++ .release = rsz_release, ++ .mmap = rsz_mmap, ++ .unlocked_ioctl = rsz_unlocked_ioctl, ++}; ++ ++/** ++ * rsz_isr - Interrupt Service Routine for Resizer wrapper ++ * @status: ISP IRQ0STATUS register value ++ * @arg1: Currently not used ++ * @arg2: Currently not used ++ * ++ * Interrupt Service Routine for Resizer wrapper ++ **/ ++static void rsz_isr(unsigned long status, isp_vbq_callback_ptr arg1, void *arg2) ++{ ++ ++ if ((status & RESZ_DONE) != RESZ_DONE) ++ return; ++ ++ complete(&(device_config->compl_isr)); ++ ++} ++ ++/** ++ * resizer_platform_release - Acts when Reference count is zero ++ * @device: Structure containing ISP resizer wrapper global information ++ * ++ * This is called when the reference count goes to zero. ++ **/ ++static void resizer_platform_release(struct device *device) ++{ ++} ++ ++/** ++ * resizer_probe - Checks for device presence ++ * @device: Structure containing details of the current device. ++ * ++ * Always returns 0. ++ **/ ++static int __init resizer_probe(struct platform_device *device) ++{ ++ return 0; ++} ++ ++/** ++ * resizer_remove - Handles the removal of the driver ++ * @omap_resizer_device: Structure containing details of the current device. ++ * ++ * Always returns 0. ++ **/ ++static int resizer_remove(struct platform_device *omap_resizer_device) ++{ ++ return 0; ++} ++ ++static struct class *rsz_class; ++static struct cdev c_dev; ++static dev_t dev; ++static struct platform_device omap_resizer_device = { ++ .name = OMAP_REZR_NAME, ++ .id = 2, ++ .dev = { ++ .release = resizer_platform_release,} ++}; ++ ++static struct platform_driver omap_resizer_driver = { ++ .probe = resizer_probe, ++ .remove = resizer_remove, ++ .driver = { ++ .bus = &platform_bus_type, ++ .name = OMAP_REZR_NAME, ++ }, ++}; ++ ++/** ++ * omap_rsz_init - Initialization of Resizer Wrapper ++ * ++ * Returns 0 if successful, -ENOMEM if could not allocate memory, -ENODEV if ++ * could not register the wrapper as a character device, or other errors if the ++ * device or driver can't register. ++ **/ ++static int __init omap_rsz_init(void) ++{ ++ int ret = 0; ++ struct device_params *device; ++ device = kzalloc(sizeof(struct device_params), GFP_KERNEL); ++ if (!device) { ++ dev_err(rsz_device, OMAP_REZR_NAME ": could not allocate " ++ "memory\n"); ++ return -ENOMEM; ++ } ++ ++ ret = alloc_chrdev_region(&dev, 0, 1, OMAP_REZR_NAME); ++ if (ret < 0) { ++ dev_err(rsz_device, OMAP_REZR_NAME ": intialization failed. " ++ "Could not allocate region " ++ "for character device\n"); ++ kfree(device); ++ return -ENODEV; ++ } ++ ++ /* Register the driver in the kernel */ ++ /* Initialize of character device */ ++ cdev_init(&c_dev, &rsz_fops); ++ c_dev.owner = THIS_MODULE; ++ c_dev.ops = &rsz_fops; ++ ++ /* Addding character device */ ++ ret = cdev_add(&c_dev, dev, 1); ++ if (ret) { ++ dev_err(rsz_device, OMAP_REZR_NAME ": Error adding " ++ "device - %d\n", ret); ++ goto fail2; ++ } ++ rsz_major = MAJOR(dev); ++ ++ /* register driver as a platform driver */ ++ ret = platform_driver_register(&omap_resizer_driver); ++ if (ret) { ++ dev_err(rsz_device, OMAP_REZR_NAME ++ ": Failed to register platform driver!\n"); ++ goto fail3; ++ } ++ ++ /* Register the drive as a platform device */ ++ ret = platform_device_register(&omap_resizer_device); ++ if (ret) { ++ dev_err(rsz_device, OMAP_REZR_NAME ++ ": Failed to register platform device!\n"); ++ goto fail4; ++ } ++ ++ rsz_class = class_create(THIS_MODULE, OMAP_REZR_NAME); ++ if (!rsz_class) { ++ dev_err(rsz_device, OMAP_REZR_NAME ++ ": Failed to create class!\n"); ++ goto fail5; ++ } ++ ++ /* make entry in the devfs */ ++ rsz_device = device_create(rsz_class, rsz_device, ++ MKDEV(rsz_major, 0), NULL, ++ OMAP_REZR_NAME); ++ dev_dbg(rsz_device, OMAP_REZR_NAME ": Registered Resizer Wrapper\n"); ++ device->opened = 0; ++ ++ device->vbq_ops.buf_setup = rsz_vbq_setup; ++ device->vbq_ops.buf_prepare = rsz_vbq_prepare; ++ device->vbq_ops.buf_release = rsz_vbq_release; ++ device->vbq_ops.buf_queue = rsz_vbq_queue; ++ init_completion(&device->compl_isr); ++ mutex_init(&device->reszwrap_mutex); ++ ++ device_config = device; ++ return 0; ++ ++fail5: ++ platform_device_unregister(&omap_resizer_device); ++fail4: ++ platform_driver_unregister(&omap_resizer_driver); ++fail3: ++ cdev_del(&c_dev); ++fail2: ++ unregister_chrdev_region(dev, 1); ++ kfree(device); ++ return ret; ++} ++ ++/** ++ * omap_rsz_exit - Close of Resizer Wrapper ++ **/ ++void __exit omap_rsz_exit(void) ++{ ++ device_destroy(rsz_class, dev); ++ class_destroy(rsz_class); ++ platform_device_unregister(&omap_resizer_device); ++ platform_driver_unregister(&omap_resizer_driver); ++ cdev_del(&c_dev); ++ unregister_chrdev_region(dev, 1); ++ kfree(device_config); ++} ++ ++module_init(omap_rsz_init) ++module_exit(omap_rsz_exit) ++ ++MODULE_AUTHOR("Texas Instruments"); ++MODULE_DESCRIPTION("OMAP ISP Resizer"); ++MODULE_LICENSE("GPL"); +diff --git a/include/linux/omap_resizer.h b/include/linux/omap_resizer.h +new file mode 100644 +index 0000000..5ac0c88 +--- /dev/null ++++ b/include/linux/omap_resizer.h +@@ -0,0 +1,136 @@ ++/* ++ * drivers/media/video/isp/omap_resizer.h ++ * ++ * Include file for Resizer module wrapper in TI's OMAP3430 ISP ++ * ++ * Copyright (C) 2008 Texas Instruments, Inc. ++ * ++ * This package is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR ++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED ++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. ++ */ ++ ++#ifndef OMAP_RESIZER_H ++#define OMAP_RESIZER_H ++ ++#include ++ ++/* ioctls definition */ ++#define RSZ_IOC_BASE 'R' ++#define RSZ_IOC_MAXNR 8 ++ ++/*Ioctl options which are to be passed while calling the ioctl*/ ++#define RSZ_REQBUF _IOWR(RSZ_IOC_BASE, 1,\ ++ struct v4l2_requestbuffers) ++#define RSZ_QUERYBUF _IOWR(RSZ_IOC_BASE, 2, struct v4l2_buffer) ++#define RSZ_S_PARAM _IOWR(RSZ_IOC_BASE, 3, struct rsz_params) ++#define RSZ_G_PARAM _IOWR(RSZ_IOC_BASE, 4, struct rsz_params) ++#define RSZ_RESIZE _IOWR(RSZ_IOC_BASE, 5, __s32) ++#define RSZ_G_STATUS _IOWR(RSZ_IOC_BASE, 6, struct rsz_status) ++#define RSZ_QUEUEBUF _IOWR(RSZ_IOC_BASE, 7, struct v4l2_buffer) ++#define RSZ_GET_CROPSIZE _IOWR(RSZ_IOC_BASE, 8, struct rsz_cropsize) ++ ++#define RSZ_INTYPE_YCBCR422_16BIT 0 ++#define RSZ_INTYPE_PLANAR_8BIT 1 ++#define RSZ_PIX_FMT_UYVY 1 /* cb:y:cr:y */ ++#define RSZ_PIX_FMT_YUYV 0 /* y:cb:y:cr */ ++ ++enum config_done { ++ STATE_CONFIGURED, /* Resizer driver configured ++ * by application. ++ */ ++ STATE_NOT_CONFIGURED /* Resizer driver not ++ * configured by application. ++ */ ++}; ++ ++/* Structure Definitions */ ++ ++/* used to luma enhancement options */ ++ ++struct rsz_yenh { ++ __s32 type; /* represents luma enable or ++ * disable. ++ */ ++ __u8 gain; /* represents gain. */ ++ __u8 slop; /* represents slop. */ ++ __u8 core; /* Represents core value. */ ++}; ++ ++/* Conatins all the parameters for resizing. This structure ++ * is used to configure resiser parameters ++ */ ++struct rsz_params { ++ __s32 in_hsize; /* input frame horizontal ++ * size. ++ */ ++ __s32 in_vsize; /* input frame vertical size */ ++ __s32 in_pitch; /* offset between two rows of ++ * input frame. ++ */ ++ __s32 inptyp; /* for determining 16 bit or ++ * 8 bit data. ++ */ ++ __s32 vert_starting_pixel; /* for specifying vertical ++ * starting pixel in input. ++ */ ++ __s32 horz_starting_pixel; /* for specyfing horizontal ++ * starting pixel in input. ++ */ ++ __s32 cbilin; /* # defined, filter with luma ++ * or bi-linear interpolation. ++ */ ++ __s32 pix_fmt; /* # defined, UYVY or YUYV */ ++ __s32 out_hsize; /* output frame horizontal ++ * size. ++ */ ++ __s32 out_vsize; /* output frame vertical ++ * size. ++ */ ++ __s32 out_pitch; /* offset between two rows of ++ * output frame. ++ */ ++ __s32 hstph; /* for specifying horizontal ++ * starting phase. ++ */ ++ __s32 vstph; /* for specifying vertical ++ * starting phase. ++ */ ++ __u16 tap4filt_coeffs[32]; /* horizontal filter ++ * coefficients. ++ */ ++ __u16 tap7filt_coeffs[32]; /* vertical filter ++ * coefficients. ++ */ ++ struct rsz_yenh yenh_params; ++}; ++ ++/* Contains the status of hardware and channel */ ++struct rsz_status { ++ __s32 chan_busy; /* 1: channel is busy, ++ * 0: channel is not busy ++ */ ++ __s32 hw_busy; /* 1: hardware is busy, ++ * 0: hardware is not busy ++ */ ++ __s32 src; /* # defined, can be either ++ * SD-RAM or CCDC/PREVIEWER ++ */ ++}; ++ ++/* Passed by application for getting crop size */ ++struct rsz_cropsize { ++ __u32 hcrop; /* Number of pixels per line ++ * cropped in output image. ++ */ ++ ++ __u32 vcrop; /* Number of lines cropped ++ * in output image. ++ */ ++}; ++ ++#endif +-- +1.6.0.3 + +--- /tmp/Kconfig 2009-04-06 10:56:27.000000000 +0200 ++++ git/drivers/media/video/Kconfig 2009-04-06 10:57:25.000000000 +0200 +@@ -711,6 +711,9 @@ + CMOS camera controller. This is the controller found on first- + generation OLPC systems. + ++ ++source "drivers/media/video/isp/Kconfig" ++ + config VIDEO_OMAP3 + tristate "OMAP 3 Camera support" + select VIDEOBUF_GEN diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/standalone/0002-Resizer-bug-fixes-on-top-of-1.0.2-release.patch b/meta/packages/linux/linux-omap-2.6.29/isp/standalone/0002-Resizer-bug-fixes-on-top-of-1.0.2-release.patch new file mode 100644 index 000000000..631b05f41 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/standalone/0002-Resizer-bug-fixes-on-top-of-1.0.2-release.patch @@ -0,0 +1,730 @@ +From 20d79137ecaa6c7dad007d9ea1d7be5550db4839 Mon Sep 17 00:00:00 2001 +From: Vaibhav Hiremath +Date: Fri, 13 Feb 2009 15:40:25 +0530 +Subject: [PATCH 2/2] Resizer bug fixes on top of 1.0.2 release + +This commit contains resizer bug fixes on top of + PSP1.0.2 release - + - 4096 aligned address constraint + - workaround for extra page allocation for page aligned + size buffers + +Signed-off-by: Vaibhav Hiremath +--- + drivers/media/video/isp/omap_resizer.c | 417 ++++++++++++++++++++++++-------- + include/linux/omap_resizer.h | 3 +- + 2 files changed, 321 insertions(+), 99 deletions(-) + +diff --git a/drivers/media/video/isp/omap_resizer.c b/drivers/media/video/isp/omap_resizer.c +index 54bc425..8059c70 100644 +--- a/drivers/media/video/isp/omap_resizer.c ++++ b/drivers/media/video/isp/omap_resizer.c +@@ -28,6 +28,7 @@ + #include + #include + #include ++#include + #include + #include + +@@ -76,6 +77,10 @@ + #define MAX_COEF_COUNTER 16 + #define COEFF_ADDRESS_OFFSET 0x04 + ++#define RSZ_DEF_REQ_EXP 0xE /* Default read operation expand ++ * for the Resizer driver; value ++ * taken from Davinci. ++ */ + /* Global structure which contains information about number of channels + and protection variables */ + struct device_params { +@@ -85,6 +90,7 @@ struct device_params { + struct mutex reszwrap_mutex; /* Semaphore for array */ + + struct videobuf_queue_ops vbq_ops; /* videobuf queue operations */ ++ unsigned long extra_page_addr; + }; + + /* Register mapped structure which contains the every register +@@ -126,6 +132,9 @@ struct resizer_config { + u32 rsz_yehn; /* yehn(luma)register mapping + * variable. + */ ++ u32 sdr_req_exp; /* Configuration for Non ++ * real time read expand ++ */ + }; + + struct rsz_mult { +@@ -179,6 +188,7 @@ struct channel_config { + * channel is busy or not + */ + struct mutex chanprotection_mutex; ++ int buf_address[VIDEO_MAX_FRAME]; + enum config_done config_state; + u8 input_buf_index; + u8 output_buf_index; +@@ -200,8 +210,6 @@ struct rsz_fh { + struct videobuf_queue vbq; + struct device_params *device; + +- dma_addr_t isp_addr_read; /* Input/Output address */ +- dma_addr_t isp_addr_write; /* Input/Output address */ + u32 rsz_bufsize; /* channel specific buffersize + */ + }; +@@ -227,6 +235,10 @@ static int rsz_set_ratio(struct rsz_mult *multipass, + static void rsz_config_ratio(struct rsz_mult *multipass, + struct channel_config *rsz_conf_chan); + ++static void inline rsz_set_exp(unsigned int exp) ++{ ++ omap_writel(((exp & 0x3FF) << 10), OMAP3ISP_SBL_REG(0xF8)); ++} + /** + * rsz_hardware_setup - Sets hardware configuration registers + * @rsz_conf_chan: Structure containing channel configuration +@@ -271,12 +283,15 @@ static void rsz_hardware_setup(struct channel_config *rsz_conf_chan) + + coeffoffset)); + coeffoffset = coeffoffset + COEFF_ADDRESS_OFFSET; + } ++ /* Configure the read expand register */ ++ rsz_set_exp(rsz_conf_chan->register_config.sdr_req_exp); + } + + /** + * rsz_start - Enables Resizer Wrapper + * @arg: Currently not used. +- * @device: Structure containing ISP resizer wrapper global information ++ * @fh: File structure containing ISP resizer information specific to ++ * channel opened. + * + * Submits a resizing task specified by the rsz_resize structure. The call can + * either be blocked until the task is completed or returned immediately based +@@ -292,12 +307,18 @@ int rsz_start(int *arg, struct rsz_fh *fh) + struct channel_config *rsz_conf_chan = fh->config; + struct rsz_mult *multipass = fh->multipass; + struct videobuf_queue *q = &fh->vbq; ++ struct videobuf_buffer *buf; + int ret; + + if (rsz_conf_chan->config_state) { + dev_err(rsz_device, "State not configured \n"); + goto err_einval; + } ++ if (!rsz_conf_chan->register_config.rsz_sdr_inadd || ++ !rsz_conf_chan->register_config.rsz_sdr_outadd) { ++ dev_err(rsz_device, "address is null\n"); ++ goto err_einval; ++ } + + rsz_conf_chan->status = CHANNEL_BUSY; + +@@ -325,33 +346,22 @@ mult: + goto mult; + } + +- if (fh->isp_addr_read) { +- ispmmu_vunmap(fh->isp_addr_read); +- fh->isp_addr_read = 0; +- } +- if (fh->isp_addr_write) { +- ispmmu_vunmap(fh->isp_addr_write); +- fh->isp_addr_write = 0; +- } +- + rsz_conf_chan->status = CHANNEL_FREE; +- q->bufs[rsz_conf_chan->input_buf_index]->state = VIDEOBUF_NEEDS_INIT; +- q->bufs[rsz_conf_chan->output_buf_index]->state = VIDEOBUF_NEEDS_INIT; + rsz_conf_chan->register_config.rsz_sdr_outadd = 0; + rsz_conf_chan->register_config.rsz_sdr_inadd = 0; + +- /* Unmap and free the DMA memory allocated for buffers */ +- videobuf_dma_unmap(q, videobuf_to_dma( +- q->bufs[rsz_conf_chan->input_buf_index])); +- videobuf_dma_unmap(q, videobuf_to_dma( +- q->bufs[rsz_conf_chan->output_buf_index])); +- videobuf_dma_free(videobuf_to_dma( +- q->bufs[rsz_conf_chan->input_buf_index])); +- videobuf_dma_free(videobuf_to_dma( +- q->bufs[rsz_conf_chan->output_buf_index])); +- + isp_unset_callback(CBK_RESZ_DONE); + ++ /* Empty the Videobuf queue which was filled during the qbuf */ ++ buf = q->bufs[rsz_conf_chan->input_buf_index]; ++ buf->state = VIDEOBUF_IDLE; ++ list_del(&buf->stream); ++ if (rsz_conf_chan->input_buf_index != rsz_conf_chan->output_buf_index) { ++ buf = q->bufs[rsz_conf_chan->output_buf_index]; ++ buf->state = VIDEOBUF_IDLE; ++ list_del(&buf->stream); ++ } ++ + return 0; + err_einval: + return -EINVAL; +@@ -359,6 +369,8 @@ err_einval: + + /** + * rsz_set_multipass - Set resizer multipass ++ * @multipass: Structure containing channel configuration ++ for multipass support + * @rsz_conf_chan: Structure containing channel configuration + * + * Returns always 0 +@@ -384,6 +396,8 @@ static int rsz_set_multipass(struct rsz_mult *multipass, + + /** + * rsz_copy_data - Copy data ++ * @multipass: Structure containing channel configuration ++ for multipass support + * @params: Structure containing the Resizer Wrapper parameters + * + * Copy data +@@ -413,6 +427,8 @@ static void rsz_copy_data(struct rsz_mult *multipass, struct rsz_params *params) + + /** + * rsz_set_params - Set parameters for resizer wrapper ++ * @multipass: Structure containing channel configuration ++ for multipass support + * @params: Structure containing the Resizer Wrapper parameters + * @rsz_conf_chan: Structure containing channel configuration + * +@@ -524,6 +540,8 @@ static int rsz_set_params(struct rsz_mult *multipass, struct rsz_params *params, + } + + rsz_config_ratio(multipass, rsz_conf_chan); ++ /* Default value for read expand:Taken from Davinci */ ++ rsz_conf_chan->register_config.sdr_req_exp = RSZ_DEF_REQ_EXP; + + rsz_conf_chan->config_state = STATE_CONFIGURED; + +@@ -534,6 +552,8 @@ err_einval: + + /** + * rsz_set_ratio - Set ratio ++ * @multipass: Structure containing channel configuration ++ for multipass support + * @rsz_conf_chan: Structure containing channel configuration + * + * Returns 0 if successful, -EINVAL if invalid output size, upscaling ratio is +@@ -548,7 +568,8 @@ static int rsz_set_ratio(struct rsz_mult *multipass, + + if ((multipass->out_hsize > MAX_IMAGE_WIDTH) || + (multipass->out_vsize > MAX_IMAGE_WIDTH)) { +- dev_err(rsz_device, "Invalid output size!"); ++ dev_err(rsz_device, "Invalid output size! - %d", \ ++ multipass->out_hsize); + goto err_einval; + } + if (multipass->cbilin) { +@@ -758,6 +779,8 @@ err_einval: + + /** + * rsz_config_ratio - Configure ratio ++ * @multipass: Structure containing channel configuration ++ for multipass support + * @rsz_conf_chan: Structure containing channel configuration + * + * Configure ratio +@@ -789,6 +812,20 @@ static void rsz_config_ratio(struct rsz_mult *multipass, + ((vsize << ISPRSZ_IN_SIZE_VERT_SHIFT) + & ISPRSZ_IN_SIZE_VERT_MASK); + ++ /* This is another workaround for the ISP-MMU translation fault. ++ For the parameters whose image size comes exactly to PAGE_SIZE ++ generates ISP-MMU translation fault. The root-cause is the equation ++ input width = (32*sph + (ow - 1)*hrsz + 16) >> 8 + 7 ++ = (64*sph + (ow - 1)*hrsz + 32) >> 8 + 7 ++ input height = (32*spv + (oh - 1)*vrsz + 16) >> 8 + 4 ++ = (64*spv + (oh - 1)*vrsz + 32) >> 8 + 7 ++ ++ we are adjusting the input width to suit for Resizer module, ++ application should use this configuration henceforth. ++ */ ++ multipass->in_hsize = hsize; ++ multipass->in_vsize = vsize; ++ + for (coeffcounter = 0; coeffcounter < MAX_COEF_COUNTER; + coeffcounter++) { + if (multipass->num_htap) { +@@ -990,24 +1027,15 @@ static void rsz_calculate_crop(struct channel_config *rsz_conf_chan, + static void rsz_vbq_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) + { +- int i; + struct rsz_fh *fh = q->priv_data; ++ struct videobuf_dmabuf *dma = NULL; + +- for (i = 0; i < VIDEO_MAX_FRAME; i++) { +- struct videobuf_dmabuf *dma = NULL; +- if (!q->bufs[i]) +- continue; +- if (q->bufs[i]->memory != V4L2_MEMORY_MMAP) +- continue; +- dma = videobuf_to_dma(q->bufs[i]); +- videobuf_dma_unmap(q, dma); +- videobuf_dma_free(dma); +- } ++ dma = videobuf_to_dma(q->bufs[vb->i]); ++ videobuf_dma_unmap(q, dma); ++ videobuf_dma_free(dma); ++ ispmmu_vunmap(fh->config->buf_address[vb->i]); ++ fh->config->buf_address[vb->i] = 0; + +- ispmmu_vunmap(fh->isp_addr_read); +- ispmmu_vunmap(fh->isp_addr_write); +- fh->isp_addr_read = 0; +- fh->isp_addr_write = 0; + spin_lock(&fh->vbq_lock); + vb->state = VIDEOBUF_NEEDS_INIT; + spin_unlock(&fh->vbq_lock); +@@ -1062,7 +1090,105 @@ err_einval: + spin_unlock(&fh->vbq_lock); + return -EINVAL; + } ++/* ++ * This function is work around for the videobuf_iolock API, ++ * for User memory allocated with ioremap (VM_IO flag) the API ++ * get_user_pages fails. ++ * ++ * To fulfill this requirement, we have completely ignored VM layer of ++ * Linux, and configuring the ISP MMU with physical address. ++ */ ++static int omap_videobuf_dma_init_user(struct videobuf_buffer *vb, ++ unsigned long physp, unsigned long asize) ++{ ++ struct videobuf_dmabuf *dma; ++ struct scatterlist *sglist; ++ unsigned long data, first, last; ++ int len, i = 0; ++ ++ dma = videobuf_to_dma(vb); ++ data = vb->baddr; ++ ++ first = (data & PAGE_MASK) >> PAGE_SHIFT; ++ last = ((data+asize-1) & PAGE_MASK) >> PAGE_SHIFT; ++ dma->offset = data & ~PAGE_MASK; ++ dma->nr_pages = last-first+1; ++ ++ dma->direction = PCI_DMA_FROMDEVICE; ++ /* ++ * Allocate array of sglen + 1, to add entry of extra page ++ * for input buffer. Driver always uses 0th buffer as input buffer. ++ */ ++ len = dma->nr_pages + (vb->i ? 0 : 1); ++ sglist = kcalloc(len, sizeof(*sglist), GFP_KERNEL); ++ if (NULL == sglist) ++ return -ENOMEM; ++ ++ sglist[0].offset = 0; ++ sglist[0].length = PAGE_SIZE - dma->offset; ++ sglist[0].dma_address = (dma_addr_t)physp; ++ physp += sglist[0].length; ++ /* ++ * Iterate in a loop for the number of pages ++ */ ++ for (i = 1; i < (len - (vb->i ? 0 : 1)); i++) { ++ sglist[i].offset = 0; ++ sglist[i].length = PAGE_SIZE; ++ sglist[i].dma_address = (dma_addr_t)physp; ++ physp += PAGE_SIZE; ++ } ++ if (0 == vb->i) { ++ sglist[i].offset = 0; ++ sglist[i].length = PAGE_SIZE; ++ sglist[i].dma_address = ++ (dma_addr_t)device_config->extra_page_addr; ++ } ++ dma->sglist = sglist; ++ dma->sglen = len; ++ return 0; ++ ++ } ++/* ++ * This function is workaround for the issue, where ISP-MMU generated ++ * translation fault for specific params whose size is aligned to PAGE_SIZE. ++ ++ * As a workaround we are padding one extra page for input buffer. This page ++ * we are allocating during init time and will not be released through-out ++ * life time of resizer driver. Please note that Resizer module only reads ++ * from this extra page. ++ */ ++int omap_create_sg(struct videobuf_queue *q, struct videobuf_dmabuf *dma) ++{ ++ struct scatterlist *sglist; ++ int sglen; + ++ sglen = dma->sglen; ++ sglist = kcalloc(sglen + 1, sizeof(*sglist), GFP_KERNEL); ++ if (NULL == sglist) ++ return -ENOMEM; ++ /* ++ * Copy the sglist locally ++ */ ++ memcpy(sglist, dma->sglist, sglen * sizeof(*sglist)); ++ /* ++ * Release the old sglist, since we already copied it locally ++ */ ++ videobuf_dma_unmap(q, dma); ++ /* ++ * Add extra entry to sglist to work with specific params, whose ++ * buffer address alined to PAGE_SIZE. ++ */ ++ sglist[sglen].offset = 0; ++ sglist[sglen].length = PAGE_SIZE; ++ sglist[sglen].dma_address = (dma_addr_t)device_config->extra_page_addr; ++ sglen++; ++ /* ++ * Save the sglist for mapping to ISP-MMU space ++ */ ++ dma->sglist = sglist; ++ dma->sglen = sglen; ++ return 0; ++} + /** + * rsz_vbq_prepare - Videobuffer is prepared and mmapped. + * @q: Structure containing the videobuffer queue file handle, and device +@@ -1079,19 +1205,24 @@ static int rsz_vbq_prepare(struct videobuf_queue *q, + { + struct rsz_fh *fh = q->priv_data; + struct channel_config *rsz_conf_chan = fh->config; +- struct rsz_mult *multipass = fh->multipass; + int err = 0; + unsigned int isp_addr, insize, outsize; +- struct videobuf_dmabuf *dma = videobuf_to_dma(vb); +- ++ struct rsz_mult *multipass = fh->multipass; + spin_lock(&fh->vbq_lock); + if (vb->baddr) { ++ /* Check for 32 byte alignement */ ++ if (vb->baddr != (vb->baddr & ~0x1F)) { ++ spin_unlock(&fh->vbq_lock); ++ dev_err(rsz_device, "Buffer address should be aligned \ ++ to 32 byte\n"); ++ return -EINVAL; ++ } + vb->size = fh->rsz_bufsize; + vb->bsize = fh->rsz_bufsize; + } else { + spin_unlock(&fh->vbq_lock); + dev_err(rsz_device, "No user buffer allocated\n"); +- goto out; ++ return -EINVAL; + } + if (vb->i) { + vb->width = fh->params->out_hsize; +@@ -1103,55 +1234,128 @@ static int rsz_vbq_prepare(struct videobuf_queue *q, + + vb->field = field; + spin_unlock(&fh->vbq_lock); ++ /* ++ * Calculate input and output sizes, will be used while mapping ++ * user pages ++ */ ++ outsize = multipass->out_pitch * multipass->out_vsize; ++ insize = multipass->in_pitch * multipass->in_vsize; + + if (vb->state == VIDEOBUF_NEEDS_INIT) { +- err = videobuf_iolock(q, vb, NULL); +- if (!err) { +- isp_addr = ispmmu_vmap(dma->sglist, dma->sglen); +- if (!isp_addr) +- err = -EIO; +- else { +- if (vb->i) { +- rsz_conf_chan->register_config. +- rsz_sdr_outadd +- = isp_addr; +- fh->isp_addr_write = isp_addr; +- rsz_conf_chan->output_buf_index = vb->i; +- } else { ++ struct videobuf_dmabuf *dma; ++ struct vm_area_struct *vma; ++ spin_lock(&fh->vbq_lock); ++ dma = videobuf_to_dma(vb); ++ vma = find_vma(current->mm, vb->baddr); ++ if ((vma) && (vma->vm_flags & VM_IO) && (vma->vm_pgoff)) { ++ /* This will catch ioremaped buffers to the kernel. ++ * It gives two possible scenarios - ++ * - Driver allocates buffer using either ++ * dma_alloc_coherent or get_free_pages, ++ * and maps to user space using ++ * io_remap_pfn_range/remap_pfn_range ++ * - Drivers maps memory outside from Linux using ++ * io_remap ++ */ ++ unsigned long physp = 0, asize; ++ asize = vb->i ? outsize : insize; ++ if ((vb->baddr + asize) > vma->vm_end) { ++ spin_unlock(&fh->vbq_lock); ++ dev_err(rsz_device, "User Buffer Allocation:" \ ++ "err=%lu[%lu]\n",\ ++ (vma->vm_end - vb->baddr), asize); ++ return -ENOMEM; ++ } ++ physp = (vma->vm_pgoff << PAGE_SHIFT) + ++ (vb->baddr - vma->vm_start); ++ err = omap_videobuf_dma_init_user(vb, physp, asize); ++ spin_unlock(&fh->vbq_lock); ++ if (0 != err) ++ return err; ++ } else { ++ err = videobuf_iolock(q, vb, NULL); ++ /* ++ * In case of user pointer mode, the get_user_pages ++ * will fail if user has allocated less memory than ++ * vb->size. But it is not error from resizer driver ++ * point of view. so handled seperately ++ */ ++ if ((err < 0) && (dma->nr_pages > 0)) ++ err = videobuf_dma_map(q, dma); ++ if (err) ++ goto buf_release; ++ /* ++ * Add one extra page for input buffer ++ */ ++ if (0 == vb->i) ++ err = omap_create_sg(q, dma); ++ if (err) ++ goto buf_release; ++ spin_unlock(&fh->vbq_lock); ++ } ++ isp_addr = ispmmu_vmap(dma->sglist, dma->sglen); ++ if (!isp_addr) ++ err = -EIO; ++ else { ++ if (vb->i) { ++ rsz_conf_chan->buf_address[vb->i] = isp_addr; ++ rsz_conf_chan->register_config. ++ rsz_sdr_outadd ++ = isp_addr; ++ rsz_conf_chan->output_buf_index = vb->i; ++ } else { ++ rsz_conf_chan->buf_address[vb->i] = isp_addr; ++ rsz_conf_chan->register_config. ++ rsz_sdr_inadd ++ = isp_addr; ++ rsz_conf_chan->input_buf_index = vb->i; ++ if (outsize < insize && rsz_conf_chan-> ++ register_config. ++ rsz_sdr_outadd == 0) { + rsz_conf_chan->register_config. +- rsz_sdr_inadd +- = isp_addr; +- rsz_conf_chan->input_buf_index = vb->i; +- outsize = multipass->out_pitch * +- multipass->out_vsize; +- insize = multipass->in_pitch * +- multipass->in_vsize; +- if (outsize < insize) { +- rsz_conf_chan->register_config. +- rsz_sdr_outadd +- = isp_addr; +- rsz_conf_chan-> +- output_buf_index = +- vb->i; +- } +- +- fh->isp_addr_read = isp_addr; ++ rsz_sdr_outadd ++ = isp_addr; ++ rsz_conf_chan-> ++ output_buf_index = ++ vb->i; + } + } + } + +- } ++ } else { ++ if(vb->i) { ++ rsz_conf_chan->register_config. ++ rsz_sdr_outadd = ++ rsz_conf_chan->buf_address[vb->i]; ++ rsz_conf_chan->output_buf_index = vb->i; ++ } else { ++ rsz_conf_chan->register_config. ++ rsz_sdr_inadd = ++ rsz_conf_chan->buf_address[vb->i]; ++ rsz_conf_chan->input_buf_index = vb->i; ++ if(outsize < insize && rsz_conf_chan-> ++ register_config. ++ rsz_sdr_outadd == 0) { ++ rsz_conf_chan->register_config. ++ rsz_sdr_outadd ++ = rsz_conf_chan->buf_address[vb->i]; ++ rsz_conf_chan->output_buf_index = vb->i; ++ } ++ ++ } + ++ } + if (!err) { + spin_lock(&fh->vbq_lock); + vb->state = VIDEOBUF_PREPARED; + spin_unlock(&fh->vbq_lock); +- flush_cache_user_range(NULL, vb->baddr, (vb->baddr +- + vb->bsize)); + } else + rsz_vbq_release(q, vb); + +-out: ++ return err; ++buf_release: ++ spin_unlock(&fh->vbq_lock); ++ rsz_vbq_release(q, vb); + return err; + } + +@@ -1255,7 +1459,8 @@ err_enomem0: + **/ + static int rsz_release(struct inode *inode, struct file *filp) + { +- u32 timeout = 0; ++ int i; ++ unsigned int timeout = 0; + struct rsz_fh *fh = filp->private_data; + struct channel_config *rsz_conf_chan = fh->config; + struct rsz_params *params = fh->params; +@@ -1266,17 +1471,17 @@ static int rsz_release(struct inode *inode, struct file *filp) + timeout++; + schedule(); + } +- if (mutex_lock_interruptible(&device_config->reszwrap_mutex)) +- return -EINTR; +- device_config->opened--; +- mutex_unlock(&device_config->reszwrap_mutex); +- /* This will Free memory allocated to the buffers, +- * and flushes the queue +- */ +- videobuf_queue_cancel(q); +- fh->params = NULL; +- fh->config = NULL; ++ /* Free memory allocated to the buffers */ ++ for (i = 0 ; i < VIDEO_MAX_FRAME ; i++) { ++ struct videobuf_dmabuf *dma = NULL; ++ if (!q->bufs[i]) ++ continue; ++ dma = videobuf_to_dma(q->bufs[i]); ++ videobuf_dma_unmap(q, dma); ++ videobuf_dma_free(dma); ++ } + ++ videobuf_mmap_free(q); + fh->rsz_bufsize = 0; + filp->private_data = NULL; + +@@ -1286,7 +1491,8 @@ static int rsz_release(struct inode *inode, struct file *filp) + kfree(fh); + + isp_put(); +- ++ fh->params = NULL; ++ fh->config = NULL; + return 0; + } + +@@ -1353,6 +1559,12 @@ static long rsz_unlocked_ioctl(struct file *file, unsigned int cmd, + chanprotection_mutex)) + return -EINTR; + ret = videobuf_reqbufs(&fh->vbq, (void *)&req_buf); ++ if (ret >= 0) { ++ if (copy_to_user((struct v4l2_requestbuffers *)arg, ++ &req_buf, sizeof(struct ++ v4l2_requestbuffers))) ++ return -EFAULT; ++ } + mutex_unlock(&rsz_conf_chan->chanprotection_mutex); + break; + } +@@ -1394,11 +1606,7 @@ static long rsz_unlocked_ioctl(struct file *file, unsigned int cmd, + sizeof(struct rsz_params))) { + return -EFAULT; + } +- if (mutex_lock_interruptible(&rsz_conf_chan-> +- chanprotection_mutex)) +- return -EINTR; +- ret = rsz_set_params(fh->multipass, params, rsz_conf_chan); +- mutex_unlock(&rsz_conf_chan->chanprotection_mutex); ++ ret = rsz_set_params(fh->multipass, fh->params, rsz_conf_chan); + break; + } + case RSZ_G_PARAM: +@@ -1433,6 +1641,12 @@ static long rsz_unlocked_ioctl(struct file *file, unsigned int cmd, + rsz_calculate_crop(rsz_conf_chan, (struct rsz_cropsize *)arg); + break; + ++ case RSZ_S_EXP: ++ if (mutex_lock_interruptible(&rsz_conf_chan->chanprotection_mutex)) ++ return -EINTR; ++ rsz_conf_chan->register_config.sdr_req_exp = *((unsigned int *)arg); ++ mutex_unlock(&rsz_conf_chan->chanprotection_mutex); ++ break; + default: + dev_err(rsz_device, "resizer_ioctl: Invalid Command Value"); + return -EINVAL; +@@ -1535,14 +1749,18 @@ static int __init omap_rsz_init(void) + "memory\n"); + return -ENOMEM; + } +- ++ device->extra_page_addr = __get_free_pages(GFP_KERNEL | GFP_DMA, 0); ++ if (!device->extra_page_addr) { ++ dev_err(rsz_device, OMAP_REZR_NAME ":Allocation failed. "); ++ kfree(device); ++ return -ENOMEM; ++ } + ret = alloc_chrdev_region(&dev, 0, 1, OMAP_REZR_NAME); + if (ret < 0) { + dev_err(rsz_device, OMAP_REZR_NAME ": intialization failed. " + "Could not allocate region " + "for character device\n"); +- kfree(device); +- return -ENODEV; ++ goto fail1; + } + + /* Register the driver in the kernel */ +@@ -1608,6 +1826,8 @@ fail3: + cdev_del(&c_dev); + fail2: + unregister_chrdev_region(dev, 1); ++fail1: ++ free_pages((unsigned long)device->extra_page_addr, 0); + kfree(device); + return ret; + } +@@ -1623,6 +1843,7 @@ void __exit omap_rsz_exit(void) + platform_driver_unregister(&omap_resizer_driver); + cdev_del(&c_dev); + unregister_chrdev_region(dev, 1); ++ free_pages((unsigned long)device_config->extra_page_addr, 0); + kfree(device_config); + } + +diff --git a/include/linux/omap_resizer.h b/include/linux/omap_resizer.h +index 5ac0c88..47b8dd8 100644 +--- a/include/linux/omap_resizer.h ++++ b/include/linux/omap_resizer.h +@@ -21,7 +21,7 @@ + + /* ioctls definition */ + #define RSZ_IOC_BASE 'R' +-#define RSZ_IOC_MAXNR 8 ++#define RSZ_IOC_MAXNR 9 + + /*Ioctl options which are to be passed while calling the ioctl*/ + #define RSZ_REQBUF _IOWR(RSZ_IOC_BASE, 1,\ +@@ -33,6 +33,7 @@ + #define RSZ_G_STATUS _IOWR(RSZ_IOC_BASE, 6, struct rsz_status) + #define RSZ_QUEUEBUF _IOWR(RSZ_IOC_BASE, 7, struct v4l2_buffer) + #define RSZ_GET_CROPSIZE _IOWR(RSZ_IOC_BASE, 8, struct rsz_cropsize) ++#define RSZ_S_EXP _IOWR(RSZ_IOC_BASE, 9, __s32) + + #define RSZ_INTYPE_YCBCR422_16BIT 0 + #define RSZ_INTYPE_PLANAR_8BIT 1 +-- +1.6.0.3 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/v4l/0001-V4L2-Add-COLORFX-user-control.patch b/meta/packages/linux/linux-omap-2.6.29/isp/v4l/0001-V4L2-Add-COLORFX-user-control.patch new file mode 100644 index 000000000..d9e4243b4 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/v4l/0001-V4L2-Add-COLORFX-user-control.patch @@ -0,0 +1,44 @@ +From ad422f476ce04636f911557bbfd066c516e9b472 Mon Sep 17 00:00:00 2001 +From: Aguirre Rodriguez, Sergio Alberto +Date: Tue, 20 Jan 2009 16:29:26 -0600 +Subject: [PATCH] V4L2: Add COLORFX user control + +From 07396d67b39bf7bcc81440d3e72d253ad6c54f11 Mon Sep 17 00:00:00 2001 +From: Sergio Aguirre +Date: Tue, 20 Jan 2009 15:34:43 -0600 +Subject: [PATCH v2] V4L2: Add COLORFX user control + +This is a common feature on many cameras. the options are: +Default colors, +B & W, +Sepia + +Signed-off-by: Sergio Aguirre +--- + include/linux/videodev2.h | 9 ++++++++- + 1 files changed, 8 insertions(+), 1 deletions(-) + +diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h +index 5571dbe..8e4e25e 100644 +--- a/include/linux/videodev2.h ++++ b/include/linux/videodev2.h +@@ -879,8 +879,15 @@ enum v4l2_power_line_frequency { + #define V4L2_CID_BACKLIGHT_COMPENSATION (V4L2_CID_BASE+28) + #define V4L2_CID_CHROMA_AGC (V4L2_CID_BASE+29) + #define V4L2_CID_COLOR_KILLER (V4L2_CID_BASE+30) ++#define V4L2_CID_COLORFX (V4L2_CID_BASE+31) ++enum v4l2_colorfx { ++ V4L2_COLORFX_NONE = 0, ++ V4L2_COLORFX_BW = 1, ++ V4L2_COLORFX_SEPIA = 2, ++}; ++ + /* last CID + 1 */ +-#define V4L2_CID_LASTP1 (V4L2_CID_BASE+31) ++#define V4L2_CID_LASTP1 (V4L2_CID_BASE+32) + + /* MPEG-class control IDs defined by V4L2 */ + #define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900) +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/v4l/0002-V4L-Int-if-v4l2_int_device_try_attach_all-requires.patch b/meta/packages/linux/linux-omap-2.6.29/isp/v4l/0002-V4L-Int-if-v4l2_int_device_try_attach_all-requires.patch new file mode 100644 index 000000000..45e27a2fd --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/v4l/0002-V4L-Int-if-v4l2_int_device_try_attach_all-requires.patch @@ -0,0 +1,50 @@ +From 5b007183d51543624bc9f582966f245a64157b57 Mon Sep 17 00:00:00 2001 +From: Sakari Ailus +Date: Fri, 31 Oct 2008 11:51:30 +0200 +Subject: [PATCH] V4L: Int if: v4l2_int_device_try_attach_all requires mutex + +Signed-off-by: Sakari Ailus +--- + drivers/media/video/v4l2-int-device.c | 12 ++++++++++-- + 1 files changed, 10 insertions(+), 2 deletions(-) + +diff --git a/drivers/media/video/v4l2-int-device.c b/drivers/media/video/v4l2-int-device.c +index a935bae..eb8dc84 100644 +--- a/drivers/media/video/v4l2-int-device.c ++++ b/drivers/media/video/v4l2-int-device.c +@@ -32,7 +32,7 @@ + static DEFINE_MUTEX(mutex); + static LIST_HEAD(int_list); + +-void v4l2_int_device_try_attach_all(void) ++static void __v4l2_int_device_try_attach_all(void) + { + struct v4l2_int_device *m, *s; + +@@ -66,6 +66,14 @@ void v4l2_int_device_try_attach_all(void) + } + } + } ++ ++void v4l2_int_device_try_attach_all(void) ++{ ++ mutex_lock(&mutex); ++ __v4l2_int_device_try_attach_all(); ++ mutex_unlock(&mutex); ++} ++ + EXPORT_SYMBOL_GPL(v4l2_int_device_try_attach_all); + + static int ioctl_sort_cmp(const void *a, const void *b) +@@ -89,7 +97,7 @@ int v4l2_int_device_register(struct v4l2_int_device *d) + &ioctl_sort_cmp, NULL); + mutex_lock(&mutex); + list_add(&d->head, &int_list); +- v4l2_int_device_try_attach_all(); ++ __v4l2_int_device_try_attach_all(); + mutex_unlock(&mutex); + + return 0; +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/v4l/0003-V4L-Int-if-Dummy-slave.patch b/meta/packages/linux/linux-omap-2.6.29/isp/v4l/0003-V4L-Int-if-Dummy-slave.patch new file mode 100644 index 000000000..829810fab --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/v4l/0003-V4L-Int-if-Dummy-slave.patch @@ -0,0 +1,61 @@ +From cc1d76e0f50321e80f7f50e9e214de2c9a45628a Mon Sep 17 00:00:00 2001 +From: Sakari Ailus +Date: Wed, 22 Oct 2008 18:41:20 +0300 +Subject: [PATCH] V4L: Int if: Dummy slave + +This patch implements a dummy slave that has no functionality. Helps +managing slaves in the OMAP 3 camera driver; no need to check for NULL +pointers. + +Signed-off-by: Sakari Ailus +--- + drivers/media/video/v4l2-int-device.c | 19 +++++++++++++++++++ + include/media/v4l2-int-device.h | 2 ++ + 2 files changed, 21 insertions(+), 0 deletions(-) + +diff --git a/drivers/media/video/v4l2-int-device.c b/drivers/media/video/v4l2-int-device.c +index eb8dc84..483ee2e 100644 +--- a/drivers/media/video/v4l2-int-device.c ++++ b/drivers/media/video/v4l2-int-device.c +@@ -67,6 +67,25 @@ static void __v4l2_int_device_try_attach_all(void) + } + } + ++static struct v4l2_int_slave dummy_slave = { ++ /* Dummy pointer to avoid underflow in find_ioctl. */ ++ .ioctls = (void *)sizeof(struct v4l2_int_ioctl_desc), ++ .num_ioctls = 0, ++}; ++ ++static struct v4l2_int_device dummy = { ++ .type = v4l2_int_type_slave, ++ .u = { ++ .slave = &dummy_slave, ++ }, ++}; ++ ++struct v4l2_int_device *v4l2_int_device_dummy() ++{ ++ return &dummy; ++} ++EXPORT_SYMBOL_GPL(v4l2_int_device_dummy); ++ + void v4l2_int_device_try_attach_all(void) + { + mutex_lock(&mutex); +diff --git a/include/media/v4l2-int-device.h b/include/media/v4l2-int-device.h +index fbf5855..5d254c4 100644 +--- a/include/media/v4l2-int-device.h ++++ b/include/media/v4l2-int-device.h +@@ -84,6 +84,8 @@ struct v4l2_int_device { + void *priv; + }; + ++struct v4l2_int_device *v4l2_int_device_dummy(void); ++ + void v4l2_int_device_try_attach_all(void); + + int v4l2_int_device_register(struct v4l2_int_device *d); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/v4l/0004-V4L-int-device-add-support-for-VIDIOC_QUERYMENU.patch b/meta/packages/linux/linux-omap-2.6.29/isp/v4l/0004-V4L-int-device-add-support-for-VIDIOC_QUERYMENU.patch new file mode 100644 index 000000000..b81b20419 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/v4l/0004-V4L-int-device-add-support-for-VIDIOC_QUERYMENU.patch @@ -0,0 +1,33 @@ +From e041e57cafca24cf92430cdf3cc091060a271e19 Mon Sep 17 00:00:00 2001 +From: Sakari Ailus +Date: Fri, 31 Oct 2008 10:20:31 +0200 +Subject: [PATCH] V4L: int device: add support for VIDIOC_QUERYMENU + +Signed-off-by: Tuukka Toivonen +--- + include/media/v4l2-int-device.h | 2 ++ + 1 files changed, 2 insertions(+), 0 deletions(-) + +diff --git a/include/media/v4l2-int-device.h b/include/media/v4l2-int-device.h +index 5d254c4..81f4863 100644 +--- a/include/media/v4l2-int-device.h ++++ b/include/media/v4l2-int-device.h +@@ -178,6 +178,7 @@ enum v4l2_int_ioctl_num { + vidioc_int_s_fmt_cap_num, + vidioc_int_try_fmt_cap_num, + vidioc_int_queryctrl_num, ++ vidioc_int_querymenu_num, + vidioc_int_g_ctrl_num, + vidioc_int_s_ctrl_num, + vidioc_int_cropcap_num, +@@ -282,6 +283,7 @@ V4L2_INT_WRAPPER_1(g_fmt_cap, struct v4l2_format, *); + V4L2_INT_WRAPPER_1(s_fmt_cap, struct v4l2_format, *); + V4L2_INT_WRAPPER_1(try_fmt_cap, struct v4l2_format, *); + V4L2_INT_WRAPPER_1(queryctrl, struct v4l2_queryctrl, *); ++V4L2_INT_WRAPPER_1(querymenu, struct v4l2_querymenu, *); + V4L2_INT_WRAPPER_1(g_ctrl, struct v4l2_control, *); + V4L2_INT_WRAPPER_1(s_ctrl, struct v4l2_control, *); + V4L2_INT_WRAPPER_1(cropcap, struct v4l2_cropcap, *); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/isp/v4l/0005-V4L-Int-if-Add-vidioc_int_querycap.patch b/meta/packages/linux/linux-omap-2.6.29/isp/v4l/0005-V4L-Int-if-Add-vidioc_int_querycap.patch new file mode 100644 index 000000000..a9e06290f --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/isp/v4l/0005-V4L-Int-if-Add-vidioc_int_querycap.patch @@ -0,0 +1,35 @@ +From dc05ee10583dca44e0f8d4109bd1397ee3c5ffae Mon Sep 17 00:00:00 2001 +From: Sakari Ailus +Date: Thu, 2 Oct 2008 11:55:07 +0300 +Subject: [PATCH] V4L: Int if: Add vidioc_int_querycap + +Signed-off-by: Sakari Ailus +--- + include/media/v4l2-int-device.h | 4 +++- + 1 files changed, 3 insertions(+), 1 deletions(-) + +diff --git a/include/media/v4l2-int-device.h b/include/media/v4l2-int-device.h +index 81f4863..2830ae1 100644 +--- a/include/media/v4l2-int-device.h ++++ b/include/media/v4l2-int-device.h +@@ -173,7 +173,8 @@ enum v4l2_int_ioctl_num { + * "Proper" V4L ioctls, as in struct video_device. + * + */ +- vidioc_int_enum_fmt_cap_num = 1, ++ vidioc_int_querycap_num = 1, ++ vidioc_int_enum_fmt_cap_num, + vidioc_int_g_fmt_cap_num, + vidioc_int_s_fmt_cap_num, + vidioc_int_try_fmt_cap_num, +@@ -278,6 +279,7 @@ enum v4l2_int_ioctl_num { + return desc; \ + } + ++V4L2_INT_WRAPPER_1(querycap, struct v4l2_capability, *); + V4L2_INT_WRAPPER_1(enum_fmt_cap, struct v4l2_fmtdesc, *); + V4L2_INT_WRAPPER_1(g_fmt_cap, struct v4l2_format, *); + V4L2_INT_WRAPPER_1(s_fmt_cap, struct v4l2_format, *); +-- +1.5.6.5 + diff --git a/meta/packages/linux/linux-omap-2.6.29/make-alignment-visible.diff b/meta/packages/linux/linux-omap-2.6.29/make-alignment-visible.diff new file mode 100644 index 000000000..9b3958f82 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/make-alignment-visible.diff @@ -0,0 +1,26 @@ +From: Mans Rullgard +Date: Mon, 13 Oct 2008 19:32:16 +0000 (+0100) +Subject: ARM: Add prompt for CONFIG_ALIGNMENT_TRAP +X-Git-Url: http://git.mansr.com/?p=linux-omap;a=commitdiff_plain;h=60d60f0ca47fcf4fbb649e45aa64f5a0a4c2f2c8 + +ARM: Add prompt for CONFIG_ALIGNMENT_TRAP + +This adds a prompt text for CONFIG_ALIGNMENT_TRAP, thus making it +visible in make *config. + +Signed-off-by: Mans Rullgard +--- + +diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig +index 61314f6..18d3119 100644 +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -971,7 +971,7 @@ config LEDS_CPU + will overrule the CPU usage LED. + + config ALIGNMENT_TRAP +- bool ++ bool "Enable alignment trap" + depends on CPU_CP15_MMU + default y if !ARCH_EBSA110 + help diff --git a/meta/packages/linux/linux-omap-2.6.29/mmctiming.patch b/meta/packages/linux/linux-omap-2.6.29/mmctiming.patch new file mode 100644 index 000000000..ec540ab3c --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/mmctiming.patch @@ -0,0 +1,16 @@ +Index: git/drivers/mmc/core/core.c +=================================================================== +--- git.orig/drivers/mmc/core/core.c ++++ git/drivers/mmc/core/core.c +@@ -284,9 +284,9 @@ void mmc_set_data_timeout(struct mmc_dat + * The limit is really 250 ms, but that is + * insufficient for some crappy cards. + */ +- limit_us = 300000; ++ limit_us = 500000; + else +- limit_us = 100000; ++ limit_us = 200000; + + /* + * SDHC cards always use these fixed values. diff --git a/meta/packages/linux/linux-omap-2.6.29/modedb-hd720.patch b/meta/packages/linux/linux-omap-2.6.29/modedb-hd720.patch new file mode 100644 index 000000000..0166de651 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/modedb-hd720.patch @@ -0,0 +1,13 @@ +--- orig/drivers/video/modedb.c.orig 2009-04-07 11:40:10.000000000 +0200 ++++ git/drivers/video/modedb.c 2009-04-07 10:35:29.000000000 +0200 +@@ -44,6 +44,10 @@ + NULL, 60, 640, 480, 39721, 40, 24, 32, 11, 96, 2, + 0, FB_VMODE_NONINTERLACED + }, { ++ /* 1280x720 @ 60 Hz, 45 kHz hsync, CEA 681-E Format 4 */ ++ "hd720", 60, 1280, 720, 13468, 220, 110, 20, 5, 40, 5, ++ 0, FB_VMODE_NONINTERLACED ++ }, { + /* 800x600 @ 56 Hz, 35.15 kHz hsync */ + NULL, 56, 800, 600, 27777, 128, 24, 22, 1, 72, 2, + 0, FB_VMODE_NONINTERLACED diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0001-USB-musb-only-turn-off-vbus-in-OTG-hosts.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0001-USB-musb-only-turn-off-vbus-in-OTG-hosts.patch new file mode 100644 index 000000000..a7898d144 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0001-USB-musb-only-turn-off-vbus-in-OTG-hosts.patch @@ -0,0 +1,43 @@ +From a9199e8ab6d6fb105aa251d6bf2192e7eafac8ee Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta +Date: Tue, 24 Mar 2009 17:22:53 -0700 +Subject: [PATCH] USB: musb: only turn off vbus in OTG hosts + +Except on DaVinci, VBUS is now switched off as part of idling the +USB link (after a_wait_bcon) whenever a device is disconnected +from host. This is correct for OTG hosts, where either SRP or +an ID interrupt could turn VBUS on again. + +However, for non-OTG hosts there's no way to turn VBUS on again, +so the host becomes unusable. And the procfs entry which once +allowed a manual workaround for this is now gone. + +This patch adds an is_otg_enabled() check before scheduling the +switch-off timer in disconnect path, supporting a "classic host" +mode where SRP is unavailable. + +[ dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org: tweak patch description ] + +Signed-off-by: Ajay Kumar Gupta +Signed-off-by: David Brownell +Signed-off-by: Greg Kroah-Hartman +--- + drivers/usb/musb/musb_core.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c +index af77e46..338cd16 100644 +--- a/drivers/usb/musb/musb_core.c ++++ b/drivers/usb/musb/musb_core.c +@@ -769,7 +769,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, + case OTG_STATE_A_SUSPEND: + usb_hcd_resume_root_hub(musb_to_hcd(musb)); + musb_root_disconnect(musb); +- if (musb->a_wait_bcon != 0) ++ if (musb->a_wait_bcon != 0 && is_otg_enabled(musb)) + musb_platform_try_idle(musb, jiffies + + msecs_to_jiffies(musb->a_wait_bcon)); + break; +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0002-USB-composite-avoid-inconsistent-lock-state.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0002-USB-composite-avoid-inconsistent-lock-state.patch new file mode 100644 index 000000000..5cb7bcb06 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0002-USB-composite-avoid-inconsistent-lock-state.patch @@ -0,0 +1,76 @@ +From 83eb44b1c84f99d9a5c67612bd94b4ed7c43f64c Mon Sep 17 00:00:00 2001 +From: Felipe Balbi +Date: Tue, 24 Mar 2009 17:22:49 -0700 +Subject: [PATCH] USB: composite: avoid inconsistent lock state + +Avoid the following INFO from lock debugging: + +[ 369.126112] ================================= +[ 369.132063] [ INFO: inconsistent lock state ] +[ 369.136457] 2.6.28-maemo1 #1 +[ 369.139387] --------------------------------- +[ 369.143782] inconsistent {hardirq-on-W} -> {in-hardirq-W} usage. +[ 369.149855] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes: +[ 369.154890] (&cdev->lock){+-..}, at: [] composite_disconnect+0x1c/0] +[ 369.163404] {hardirq-on-W} state was registered at: +[ 369.168348] [] __lock_acquire+0x5d0/0x7d8 +[ 369.173506] [] lock_acquire+0x64/0x78 +[ 369.178266] [] _spin_lock+0x4c/0x80 +[ 369.182905] [] usb_function_deactivate+0x20/0x70 [g_nokia] +[ 369.189527] [] 0xbf1a0a88 +[ 369.193281] [] 0xbf19f450 +[ 369.197004] [] 0xbf19fa3c +[ 369.200758] [] 0xbf1a03a0 +[ 369.204481] [] 0xbf19f254 +[ 369.208204] [] 0xbf1a0158 +[ 369.211927] [] 0xbf1a130c +[ 369.215650] [] usb_gadget_register_driver+0x12c/0x28c +[ 369.221846] [] 0xbf1a06bc +[ 369.225569] [] 0xbf1a06e8 +[ 369.229322] [] __exception_text_end+0x64/0x19c +[ 369.234877] [] sys_init_module+0x9c/0x194 +[ 369.240004] [] ret_fast_syscall+0x0/0x2c +[ 369.245039] [] 0xffffffff +[ 369.248793] irq event stamp: 218356 +[ 369.252302] hardirqs last enabled at (218355): [] omap3_enter_idle+8 +[ 369.260420] hardirqs last disabled at (218356): [] __irq_svc+0x34/0x0 +[ 369.267927] softirqs last enabled at (218348): [] __do_softirq+0x134 +[ 369.275892] softirqs last disabled at (218335): [] irq_exit+0x60/0xb0 +[ 369.283308] +[ 369.283308] other info that might help us debug this: +[ 369.289930] no locks held by swapper/0. + +Cc: David Brownell +Signed-off-by: Felipe Balbi +Signed-off-by: Greg Kroah-Hartman +--- + drivers/usb/gadget/composite.c | 5 +++-- + 1 files changed, 3 insertions(+), 2 deletions(-) + +diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c +index 5d11c29..40f1da7 100644 +--- a/drivers/usb/gadget/composite.c ++++ b/drivers/usb/gadget/composite.c +@@ -149,16 +149,17 @@ done: + int usb_function_deactivate(struct usb_function *function) + { + struct usb_composite_dev *cdev = function->config->cdev; ++ unsigned long flags; + int status = 0; + +- spin_lock(&cdev->lock); ++ spin_lock_irqsave(&cdev->lock, flags); + + if (cdev->deactivations == 0) + status = usb_gadget_disconnect(cdev->gadget); + if (status == 0) + cdev->deactivations++; + +- spin_unlock(&cdev->lock); ++ spin_unlock_irqrestore(&cdev->lock, flags); + return status; + } + +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0003-USB-musb-NAK-timeout-scheme-on-bulk-RX-endpoint.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0003-USB-musb-NAK-timeout-scheme-on-bulk-RX-endpoint.patch new file mode 100644 index 000000000..fadad9e44 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0003-USB-musb-NAK-timeout-scheme-on-bulk-RX-endpoint.patch @@ -0,0 +1,218 @@ +From ba7b26e69f4bb41f10be444c5fded853330f82b5 Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta +Date: Tue, 24 Mar 2009 17:22:51 -0700 +Subject: [PATCH] USB: musb: NAK timeout scheme on bulk RX endpoint + +Fixes endpoint starvation issue when more than one bulk QH is +multiplexed on the reserved bulk RX endpoint, which is normal +for cases like serial and ethernet adapters. + +This patch sets the NAK timeout interval for such QHs, and when +a timeout triggers the next QH will be scheduled. (This resembles +the bulk scheduling done in hardware by EHCI, OHCI, and UHCI.) + +This scheme doesn't work for devices which are connected to a +high to full speed tree (transaction translator) as there is +no NAK timeout interrupt from the musb controller from such +devices. + +Tested with PIO, Inventra DMA, CPPI DMA. + +[ dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org: fold in start_urb() update; + clarify only for bulk RX; don't accidentally clear WZC bits ] + +Signed-off-by: Ajay Kumar Gupta +Cc: Felipe Balbi +Signed-off-by: David Brownell +Signed-off-by: Greg Kroah-Hartman +--- + drivers/usb/musb/musb_host.c | 112 ++++++++++++++++++++++++++++++++---------- + 1 files changed, 85 insertions(+), 27 deletions(-) + +diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c +index 6dbbd07..bd1d5ae 100644 +--- a/drivers/usb/musb/musb_host.c ++++ b/drivers/usb/musb/musb_host.c +@@ -64,11 +64,8 @@ + * + * - DMA (Mentor/OMAP) ...has at least toggle update problems + * +- * - Still no traffic scheduling code to make NAKing for bulk or control +- * transfers unable to starve other requests; or to make efficient use +- * of hardware with periodic transfers. (Note that network drivers +- * commonly post bulk reads that stay pending for a long time; these +- * would make very visible trouble.) ++ * - [23-feb-2009] minimal traffic scheduling to avoid bulk RX packet ++ * starvation ... nothing yet for TX, interrupt, or bulk. + * + * - Not tested with HNP, but some SRP paths seem to behave. + * +@@ -88,11 +85,8 @@ + * + * CONTROL transfers all go through ep0. BULK ones go through dedicated IN + * and OUT endpoints ... hardware is dedicated for those "async" queue(s). +- * + * (Yes, bulk _could_ use more of the endpoints than that, and would even +- * benefit from it ... one remote device may easily be NAKing while others +- * need to perform transfers in that same direction. The same thing could +- * be done in software though, assuming dma cooperates.) ++ * benefit from it.) + * + * INTERUPPT and ISOCHRONOUS transfers are scheduled to the other endpoints. + * So far that scheduling is both dumb and optimistic: the endpoint will be +@@ -201,8 +195,9 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) + len = urb->iso_frame_desc[0].length; + break; + default: /* bulk, interrupt */ +- buf = urb->transfer_buffer; +- len = urb->transfer_buffer_length; ++ /* actual_length may be nonzero on retry paths */ ++ buf = urb->transfer_buffer + urb->actual_length; ++ len = urb->transfer_buffer_length - urb->actual_length; + } + + DBG(4, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n", +@@ -1045,7 +1040,8 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) + + /* NOTE: this code path would be a good place to PAUSE a + * control transfer, if another one is queued, so that +- * ep0 is more likely to stay busy. ++ * ep0 is more likely to stay busy. That's already done ++ * for bulk RX transfers. + * + * if (qh->ring.next != &musb->control), then + * we have a candidate... NAKing is *NOT* an error +@@ -1197,6 +1193,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) + /* NOTE: this code path would be a good place to PAUSE a + * transfer, if there's some other (nonperiodic) tx urb + * that could use this fifo. (dma complicates it...) ++ * That's already done for bulk RX transfers. + * + * if (bulk && qh->ring.next != &musb->out_bulk), then + * we have a candidate... NAKing is *NOT* an error +@@ -1358,6 +1355,50 @@ finish: + + #endif + ++/* Schedule next QH from musb->in_bulk and move the current qh to ++ * the end; avoids starvation for other endpoints. ++ */ ++static void musb_bulk_rx_nak_timeout(struct musb *musb, struct musb_hw_ep *ep) ++{ ++ struct dma_channel *dma; ++ struct urb *urb; ++ void __iomem *mbase = musb->mregs; ++ void __iomem *epio = ep->regs; ++ struct musb_qh *cur_qh, *next_qh; ++ u16 rx_csr; ++ ++ musb_ep_select(mbase, ep->epnum); ++ dma = is_dma_capable() ? ep->rx_channel : NULL; ++ ++ /* clear nak timeout bit */ ++ rx_csr = musb_readw(epio, MUSB_RXCSR); ++ rx_csr |= MUSB_RXCSR_H_WZC_BITS; ++ rx_csr &= ~MUSB_RXCSR_DATAERROR; ++ musb_writew(epio, MUSB_RXCSR, rx_csr); ++ ++ cur_qh = first_qh(&musb->in_bulk); ++ if (cur_qh) { ++ urb = next_urb(cur_qh); ++ if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { ++ dma->status = MUSB_DMA_STATUS_CORE_ABORT; ++ musb->dma_controller->channel_abort(dma); ++ urb->actual_length += dma->actual_len; ++ dma->actual_len = 0L; ++ } ++ musb_save_toggle(ep, 1, urb); ++ ++ /* move cur_qh to end of queue */ ++ list_move_tail(&cur_qh->ring, &musb->in_bulk); ++ ++ /* get the next qh from musb->in_bulk */ ++ next_qh = first_qh(&musb->in_bulk); ++ ++ /* set rx_reinit and schedule the next qh */ ++ ep->rx_reinit = 1; ++ musb_start_urb(musb, 1, next_qh); ++ } ++} ++ + /* + * Service an RX interrupt for the given IN endpoint; docs cover bulk, iso, + * and high-bandwidth IN transfer cases. +@@ -1421,18 +1462,26 @@ void musb_host_rx(struct musb *musb, u8 epnum) + } else if (rx_csr & MUSB_RXCSR_DATAERROR) { + + if (USB_ENDPOINT_XFER_ISOC != qh->type) { +- /* NOTE this code path would be a good place to PAUSE a +- * transfer, if there's some other (nonperiodic) rx urb +- * that could use this fifo. (dma complicates it...) ++ DBG(6, "RX end %d NAK timeout\n", epnum); ++ ++ /* NOTE: NAKing is *NOT* an error, so we want to ++ * continue. Except ... if there's a request for ++ * another QH, use that instead of starving it. + * +- * if (bulk && qh->ring.next != &musb->in_bulk), then +- * we have a candidate... NAKing is *NOT* an error ++ * Devices like Ethernet and serial adapters keep ++ * reads posted at all times, which will starve ++ * other devices without this logic. + */ +- DBG(6, "RX end %d NAK timeout\n", epnum); ++ if (usb_pipebulk(urb->pipe) ++ && qh->mux == 1 ++ && !list_is_singular(&musb->in_bulk)) { ++ musb_bulk_rx_nak_timeout(musb, hw_ep); ++ return; ++ } + musb_ep_select(mbase, epnum); +- musb_writew(epio, MUSB_RXCSR, +- MUSB_RXCSR_H_WZC_BITS +- | MUSB_RXCSR_H_REQPKT); ++ rx_csr |= MUSB_RXCSR_H_WZC_BITS; ++ rx_csr &= ~MUSB_RXCSR_DATAERROR; ++ musb_writew(epio, MUSB_RXCSR, rx_csr); + + goto finish; + } else { +@@ -1756,6 +1805,17 @@ static int musb_schedule( + head = &musb->in_bulk; + else + head = &musb->out_bulk; ++ ++ /* Enable bulk RX NAK timeout scheme when bulk requests are ++ * multiplexed. This scheme doen't work in high speed to full ++ * speed scenario as NAK interrupts are not coming from a ++ * full speed device connected to a high speed device. ++ * NAK timeout interval is 8 (128 uframe or 16ms) for HS and ++ * 4 (8 frame or 8ms) for FS device. ++ */ ++ if (is_in && qh->dev) ++ qh->intv_reg = ++ (USB_SPEED_HIGH == qh->dev->speed) ? 8 : 4; + goto success; + } else if (best_end < 0) { + return -ENOSPC; +@@ -1888,13 +1948,11 @@ static int musb_urb_enqueue( + * + * The downside of disabling this is that transfer scheduling + * gets VERY unfair for nonperiodic transfers; a misbehaving +- * peripheral could make that hurt. Or for reads, one that's +- * perfectly normal: network and other drivers keep reads +- * posted at all times, having one pending for a week should +- * be perfectly safe. ++ * peripheral could make that hurt. That's perfectly normal ++ * for reads from network or serial adapters ... so we have ++ * partial NAKlimit support for bulk RX. + * +- * The upside of disabling it is avoidng transfer scheduling +- * code to put this aside for while. ++ * The upside of disabling it is simpler transfer scheduling. + */ + interval = 0; + } +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0004-USB-musb-rewrite-host-periodic-endpoint-allocation.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0004-USB-musb-rewrite-host-periodic-endpoint-allocation.patch new file mode 100644 index 000000000..438f11cf7 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0004-USB-musb-rewrite-host-periodic-endpoint-allocation.patch @@ -0,0 +1,106 @@ +From 9ebf351bcd28a89a0b1ba8d0496fffbc72421611 Mon Sep 17 00:00:00 2001 +From: Sergei Shtylyov +Date: Tue, 24 Mar 2009 17:22:50 -0700 +Subject: [PATCH] USB: musb: rewrite host periodic endpoint allocation + +The current MUSB host code doesn't make use of all the available +FIFOs in for periodic transfers since it wrongly assumes the RX +and TX sides of any given hw_ep always share one FIFO. + +Change: use 'in_qh' and 'out_qh' fields of the 'struct musb_hw_ep' +to check the endpoint's business; get rid of the now-unused 'periodic' +array in the 'struct musb'. Also optimize a loop induction variable +in the endpoint lookup code. + +(Based on a previous patch from Ajay Kumar Gupta ) + +[ dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org: clarify description and origin + of this fix; whitespace ] + +Signed-off-by: Sergei Shtylyov +Signed-off-by: David Brownell +Cc: Felipe Balbi +Signed-off-by: Greg Kroah-Hartman +--- + drivers/usb/musb/musb_core.h | 1 - + drivers/usb/musb/musb_host.c | 28 +++++++++++----------------- + 2 files changed, 11 insertions(+), 18 deletions(-) + +diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h +index 630946a..adf1806 100644 +--- a/drivers/usb/musb/musb_core.h ++++ b/drivers/usb/musb/musb_core.h +@@ -331,7 +331,6 @@ struct musb { + struct list_head control; /* of musb_qh */ + struct list_head in_bulk; /* of musb_qh */ + struct list_head out_bulk; /* of musb_qh */ +- struct musb_qh *periodic[32]; /* tree of interrupt+iso */ + #endif + + /* called with IRQs blocked; ON/nonzero implies starting a session, +diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c +index bd1d5ae..499c431 100644 +--- a/drivers/usb/musb/musb_host.c ++++ b/drivers/usb/musb/musb_host.c +@@ -390,7 +390,6 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) + * de-allocated if it's tracked and allocated; + * and where we'd update the schedule tree... + */ +- musb->periodic[ep->epnum] = NULL; + kfree(qh); + qh = NULL; + break; +@@ -1760,31 +1759,27 @@ static int musb_schedule( + + /* else, periodic transfers get muxed to other endpoints */ + +- /* FIXME this doesn't consider direction, so it can only +- * work for one half of the endpoint hardware, and assumes +- * the previous cases handled all non-shared endpoints... +- */ +- +- /* we know this qh hasn't been scheduled, so all we need to do ++ /* ++ * We know this qh hasn't been scheduled, so all we need to do + * is choose which hardware endpoint to put it on ... + * + * REVISIT what we really want here is a regular schedule tree +- * like e.g. OHCI uses, but for now musb->periodic is just an +- * array of the _single_ logical endpoint associated with a +- * given physical one (identity mapping logical->physical). +- * +- * that simplistic approach makes TT scheduling a lot simpler; +- * there is none, and thus none of its complexity... ++ * like e.g. OHCI uses. + */ + best_diff = 4096; + best_end = -1; + +- for (epnum = 1; epnum < musb->nr_endpoints; epnum++) { ++ for (epnum = 1, hw_ep = musb->endpoints + 1; ++ epnum < musb->nr_endpoints; ++ epnum++, hw_ep++) { + int diff; + +- if (musb->periodic[epnum]) ++ if (is_in || hw_ep->is_shared_fifo) { ++ if (hw_ep->in_qh != NULL) ++ continue; ++ } else if (hw_ep->out_qh != NULL) + continue; +- hw_ep = &musb->endpoints[epnum]; ++ + if (hw_ep == musb->bulk_ep) + continue; + +@@ -1824,7 +1819,6 @@ static int musb_schedule( + idle = 1; + qh->mux = 0; + hw_ep = musb->endpoints + best_end; +- musb->periodic[best_end] = qh; + DBG(4, "qh %p periodic slot %d\n", qh, best_end); + success: + if (head) { +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0005-USB-TWL-disable-VUSB-regulators-when-cable-unplugg.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0005-USB-TWL-disable-VUSB-regulators-when-cable-unplugg.patch new file mode 100644 index 000000000..db3481b87 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0005-USB-TWL-disable-VUSB-regulators-when-cable-unplugg.patch @@ -0,0 +1,181 @@ +From 60e7ce93befe795357db05001fe4caab522a421d Mon Sep 17 00:00:00 2001 +From: Jouni Hogander +Date: Tue, 24 Mar 2009 17:22:57 -0700 +Subject: [PATCH] USB: TWL: disable VUSB regulators when cable unplugged + +This patch disables USB regulators VUSB1V5, VUSB1V8, and VUSB3V1 +when the USB cable is unplugged to reduce power consumption. +Added a depencency from twl4030 usb driver to TWL_REGULATOR. + +Signed-off-by: Jouni Hogander +Signed-off-by: Kalle Jokiniemi +Signed-off-by: Greg Kroah-Hartman +--- + drivers/usb/otg/Kconfig | 2 +- + drivers/usb/otg/twl4030-usb.c | 73 ++++++++++++++++++++++++++++++++++++----- + 2 files changed, 65 insertions(+), 10 deletions(-) + +diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig +index ee55b44..5790a5b 100644 +--- a/drivers/usb/otg/Kconfig ++++ b/drivers/usb/otg/Kconfig +@@ -43,7 +43,7 @@ config ISP1301_OMAP + + config TWL4030_USB + tristate "TWL4030 USB Transceiver Driver" +- depends on TWL4030_CORE ++ depends on TWL4030_CORE && REGULATOR_TWL4030 + select USB_OTG_UTILS + help + Enable this to support the USB OTG transceiver on TWL4030 +diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c +index 416e441..d9478d0 100644 +--- a/drivers/usb/otg/twl4030-usb.c ++++ b/drivers/usb/otg/twl4030-usb.c +@@ -34,6 +34,8 @@ + #include + #include + #include ++#include ++#include + + + /* Register defines */ +@@ -246,6 +248,11 @@ struct twl4030_usb { + struct otg_transceiver otg; + struct device *dev; + ++ /* TWL4030 internal USB regulator supplies */ ++ struct regulator *usb1v5; ++ struct regulator *usb1v8; ++ struct regulator *usb3v1; ++ + /* for vbus reporting with irqs disabled */ + spinlock_t lock; + +@@ -434,6 +441,18 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on) + + pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); + if (on) { ++ regulator_enable(twl->usb3v1); ++ regulator_enable(twl->usb1v8); ++ /* ++ * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP ++ * in twl4030) resets the VUSB_DEDICATED2 register. This reset ++ * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to ++ * SLEEP. We work around this by clearing the bit after usv3v1 ++ * is re-activated. This ensures that VUSB3V1 is really active. ++ */ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, ++ VUSB_DEDICATED2); ++ regulator_enable(twl->usb1v5); + pwr &= ~PHY_PWR_PHYPWD; + WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); + twl4030_usb_write(twl, PHY_CLK_CTRL, +@@ -443,6 +462,9 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on) + } else { + pwr |= PHY_PWR_PHYPWD; + WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); ++ regulator_disable(twl->usb1v5); ++ regulator_disable(twl->usb1v8); ++ regulator_disable(twl->usb3v1); + } + } + +@@ -468,7 +490,7 @@ static void twl4030_phy_resume(struct twl4030_usb *twl) + twl->asleep = 0; + } + +-static void twl4030_usb_ldo_init(struct twl4030_usb *twl) ++static int twl4030_usb_ldo_init(struct twl4030_usb *twl) + { + /* Enable writing to power configuration registers */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY); +@@ -480,20 +502,45 @@ static void twl4030_usb_ldo_init(struct twl4030_usb *twl) + /* input to VUSB3V1 LDO is from VBAT, not VBUS */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); + +- /* turn on 3.1V regulator */ +- twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB3V1_DEV_GRP); ++ /* Initialize 3.1V regulator */ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); ++ ++ twl->usb3v1 = regulator_get(twl->dev, "usb3v1"); ++ if (IS_ERR(twl->usb3v1)) ++ return -ENODEV; ++ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); + +- /* turn on 1.5V regulator */ +- twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB1V5_DEV_GRP); ++ /* Initialize 1.5V regulator */ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); ++ ++ twl->usb1v5 = regulator_get(twl->dev, "usb1v5"); ++ if (IS_ERR(twl->usb1v5)) ++ goto fail1; ++ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); + +- /* turn on 1.8V regulator */ +- twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB1V8_DEV_GRP); ++ /* Initialize 1.8V regulator */ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); ++ ++ twl->usb1v8 = regulator_get(twl->dev, "usb1v8"); ++ if (IS_ERR(twl->usb1v8)) ++ goto fail2; ++ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); + + /* disable access to power configuration registers */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY); ++ ++ return 0; ++ ++fail2: ++ regulator_put(twl->usb1v5); ++ twl->usb1v5 = NULL; ++fail1: ++ regulator_put(twl->usb3v1); ++ twl->usb3v1 = NULL; ++ return -ENODEV; + } + + static ssize_t twl4030_usb_vbus_show(struct device *dev, +@@ -598,7 +645,7 @@ static int __init twl4030_usb_probe(struct platform_device *pdev) + { + struct twl4030_usb_data *pdata = pdev->dev.platform_data; + struct twl4030_usb *twl; +- int status; ++ int status, err; + + if (!pdata) { + dev_dbg(&pdev->dev, "platform_data not available\n"); +@@ -622,7 +669,12 @@ static int __init twl4030_usb_probe(struct platform_device *pdev) + /* init spinlock for workqueue */ + spin_lock_init(&twl->lock); + +- twl4030_usb_ldo_init(twl); ++ err = twl4030_usb_ldo_init(twl); ++ if (err) { ++ dev_err(&pdev->dev, "ldo init failed\n"); ++ kfree(twl); ++ return err; ++ } + otg_set_transceiver(&twl->otg); + + platform_set_drvdata(pdev, twl); +@@ -688,6 +740,9 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev) + twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); + + twl4030_phy_power(twl, 0); ++ regulator_put(twl->usb1v5); ++ regulator_put(twl->usb1v8); ++ regulator_put(twl->usb3v1); + + kfree(twl); + +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0006-USB-gadget-composite-device-level-suspend-resume-h.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0006-USB-gadget-composite-device-level-suspend-resume-h.patch new file mode 100644 index 000000000..3f49a4d63 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0006-USB-gadget-composite-device-level-suspend-resume-h.patch @@ -0,0 +1,84 @@ +From 7eef82d231578140c6000d04846a48bdaf341a65 Mon Sep 17 00:00:00 2001 +From: David Brownell +Date: Tue, 24 Mar 2009 17:23:19 -0700 +Subject: [PATCH] USB: gadget: composite device-level suspend/resume hooks + +Address one open question in the composite gadget framework: +Yes, we should have device-level suspend/resume callbacks +in addition to the function-level ones. We have at least one +scenario (with gadget zero in OTG test mode) that's awkward +to handle without it. + +Signed-off-by: David Brownell +Cc: Felipe Balbi +Signed-off-by: Greg Kroah-Hartman +--- + drivers/usb/gadget/composite.c | 8 ++++++-- + include/linux/usb/composite.h | 8 ++++++++ + 2 files changed, 14 insertions(+), 2 deletions(-) + +diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c +index 40f1da7..59e8523 100644 +--- a/drivers/usb/gadget/composite.c ++++ b/drivers/usb/gadget/composite.c +@@ -1014,7 +1014,7 @@ composite_suspend(struct usb_gadget *gadget) + struct usb_composite_dev *cdev = get_gadget_data(gadget); + struct usb_function *f; + +- /* REVISIT: should we have config and device level ++ /* REVISIT: should we have config level + * suspend/resume callbacks? + */ + DBG(cdev, "suspend\n"); +@@ -1024,6 +1024,8 @@ composite_suspend(struct usb_gadget *gadget) + f->suspend(f); + } + } ++ if (composite->suspend) ++ composite->suspend(cdev); + } + + static void +@@ -1032,10 +1034,12 @@ composite_resume(struct usb_gadget *gadget) + struct usb_composite_dev *cdev = get_gadget_data(gadget); + struct usb_function *f; + +- /* REVISIT: should we have config and device level ++ /* REVISIT: should we have config level + * suspend/resume callbacks? + */ + DBG(cdev, "resume\n"); ++ if (composite->resume) ++ composite->resume(cdev); + if (cdev->config) { + list_for_each_entry(f, &cdev->config->functions, list) { + if (f->resume) +diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h +index 935c380..acd7b0f 100644 +--- a/include/linux/usb/composite.h ++++ b/include/linux/usb/composite.h +@@ -244,6 +244,10 @@ int usb_add_config(struct usb_composite_dev *, + * value; it should return zero on successful initialization. + * @unbind: Reverses @bind(); called as a side effect of unregistering + * this driver. ++ * @suspend: Notifies when the host stops sending USB traffic, ++ * after function notifications ++ * @resume: Notifies configuration when the host restarts USB traffic, ++ * before function notifications + * + * Devices default to reporting self powered operation. Devices which rely + * on bus powered operation should report this in their @bind() method. +@@ -268,6 +272,10 @@ struct usb_composite_driver { + + int (*bind)(struct usb_composite_dev *); + int (*unbind)(struct usb_composite_dev *); ++ ++ /* global suspend hooks */ ++ void (*suspend)(struct usb_composite_dev *); ++ void (*resume)(struct usb_composite_dev *); + }; + + extern int usb_composite_register(struct usb_composite_driver *); +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0007-usb-gadget-fix-ethernet-link-reports-to-ethtool.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0007-usb-gadget-fix-ethernet-link-reports-to-ethtool.patch new file mode 100644 index 000000000..a89bc2ff5 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0007-usb-gadget-fix-ethernet-link-reports-to-ethtool.patch @@ -0,0 +1,47 @@ +From 00c4bd07a64061ec9ab9c35f5bf01ec6187138f4 Mon Sep 17 00:00:00 2001 +From: Jonathan McDowell +Date: Thu, 26 Mar 2009 00:45:27 -0700 +Subject: [PATCH] usb gadget: fix ethernet link reports to ethtool + +The g_ether USB gadget driver currently decides whether or not there's a +link to report back for eth_get_link based on if the USB link speed is +set. The USB gadget speed is however often set even before the device is +enumerated. It seems more sensible to only report a "link" if we're +actually connected to a host that wants to talk to us. The patch below +does this for me - tested with the PXA27x UDC driver. + +Signed-Off-By: Jonathan McDowell +Signed-off-by: David Brownell +--- + drivers/usb/gadget/u_ether.c | 8 +------- + 1 files changed, 1 insertions(+), 7 deletions(-) + +diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c +index 96d65ca..4007770 100644 +--- a/drivers/usb/gadget/u_ether.c ++++ b/drivers/usb/gadget/u_ether.c +@@ -175,12 +175,6 @@ static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) + strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info); + } + +-static u32 eth_get_link(struct net_device *net) +-{ +- struct eth_dev *dev = netdev_priv(net); +- return dev->gadget->speed != USB_SPEED_UNKNOWN; +-} +- + /* REVISIT can also support: + * - WOL (by tracking suspends and issuing remote wakeup) + * - msglevel (implies updated messaging) +@@ -189,7 +183,7 @@ static u32 eth_get_link(struct net_device *net) + + static struct ethtool_ops ops = { + .get_drvinfo = eth_get_drvinfo, +- .get_link = eth_get_link ++ .get_link = ethtool_op_get_link, + }; + + static void defer_kevent(struct eth_dev *dev, int flag) +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0008-usb-musb_host-minor-enqueue-locking-fix-v2.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0008-usb-musb_host-minor-enqueue-locking-fix-v2.patch new file mode 100644 index 000000000..8627825b5 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0008-usb-musb_host-minor-enqueue-locking-fix-v2.patch @@ -0,0 +1,60 @@ +From c3b527a21104b6bb61558fba6c65aa80f63e0772 Mon Sep 17 00:00:00 2001 +From: David Brownell +Date: Thu, 26 Mar 2009 17:36:57 -0700 +Subject: [PATCH] usb: musb_host, minor enqueue locking fix (v2) + +Someone noted that the enqueue path used an unlocked access +for usb_host_endpoint->hcpriv ... fix that, by being safe +and always accessing it under spinlock protection. + +Signed-off-by: David Brownell +--- + drivers/usb/musb/musb_host.c | 17 ++++++++--------- + 1 files changed, 8 insertions(+), 9 deletions(-) + +diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c +index 499c431..ff09595 100644 +--- a/drivers/usb/musb/musb_host.c ++++ b/drivers/usb/musb/musb_host.c +@@ -1841,7 +1841,7 @@ static int musb_urb_enqueue( + unsigned long flags; + struct musb *musb = hcd_to_musb(hcd); + struct usb_host_endpoint *hep = urb->ep; +- struct musb_qh *qh = hep->hcpriv; ++ struct musb_qh *qh; + struct usb_endpoint_descriptor *epd = &hep->desc; + int ret; + unsigned type_reg; +@@ -1853,22 +1853,21 @@ static int musb_urb_enqueue( + + spin_lock_irqsave(&musb->lock, flags); + ret = usb_hcd_link_urb_to_ep(hcd, urb); ++ qh = ret ? NULL : hep->hcpriv; ++ if (qh) ++ urb->hcpriv = qh; + spin_unlock_irqrestore(&musb->lock, flags); +- if (ret) +- return ret; + + /* DMA mapping was already done, if needed, and this urb is on +- * hep->urb_list ... so there's little to do unless hep wasn't +- * yet scheduled onto a live qh. ++ * hep->urb_list now ... so we're done, unless hep wasn't yet ++ * scheduled onto a live qh. + * + * REVISIT best to keep hep->hcpriv valid until the endpoint gets + * disabled, testing for empty qh->ring and avoiding qh setup costs + * except for the first urb queued after a config change. + */ +- if (qh) { +- urb->hcpriv = qh; +- return 0; +- } ++ if (qh || ret) ++ return ret; + + /* Allocate and initialize qh, minimizing the work done each time + * hw_ep gets reprogrammed, or with irqs blocked. Then schedule it. +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0009-usb-musb_host-fix-ep0-fifo-flushing.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0009-usb-musb_host-fix-ep0-fifo-flushing.patch new file mode 100644 index 000000000..09fc0a17d --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0009-usb-musb_host-fix-ep0-fifo-flushing.patch @@ -0,0 +1,93 @@ +From 48ce47b15bfd420982ee275c595a9139eb6fabf7 Mon Sep 17 00:00:00 2001 +From: David Brownell +Date: Thu, 26 Mar 2009 17:38:30 -0700 +Subject: [PATCH] usb: musb_host, fix ep0 fifo flushing + +The MUSB host side can't share generic TX FIFO flush logic +with EP0; the EP0 TX status register bits are different +from those for other entpoints. + +Resolve this issue by providing a new EP0-specific routine +to flush and reset the FIFO, which pays careful attention to +restrictions listed in the latest programmer's guide. This +gets rid of an open issue whereby the usbtest control write +test (#14) failed. + +Signed-off-by: David Brownell +--- + drivers/usb/musb/musb_host.c | 38 +++++++++++++++++++++++++------------- + 1 files changed, 25 insertions(+), 13 deletions(-) + +diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c +index ff09595..a5d75aa 100644 +--- a/drivers/usb/musb/musb_host.c ++++ b/drivers/usb/musb/musb_host.c +@@ -125,6 +125,29 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep) + } + } + ++static void musb_h_ep0_flush_fifo(struct musb_hw_ep *ep) ++{ ++ void __iomem *epio = ep->regs; ++ u16 csr; ++ int retries = 5; ++ ++ /* scrub any data left in the fifo */ ++ do { ++ csr = musb_readw(epio, MUSB_TXCSR); ++ if (!(csr & (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_RXPKTRDY))) ++ break; ++ musb_writew(epio, MUSB_TXCSR, MUSB_CSR0_FLUSHFIFO); ++ csr = musb_readw(epio, MUSB_TXCSR); ++ udelay(10); ++ } while (--retries); ++ ++ WARN(!retries, "Could not flush host TX%d fifo: csr: %04x\n", ++ ep->epnum, csr); ++ ++ /* and reset for the next transfer */ ++ musb_writew(epio, MUSB_TXCSR, 0); ++} ++ + /* + * Start transmit. Caller is responsible for locking shared resources. + * musb must be locked. +@@ -693,11 +716,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum, + musb_writew(epio, MUSB_TXCSR, csr); + csr = musb_readw(epio, MUSB_TXCSR); + } else { +- /* endpoint 0: just flush */ +- musb_writew(epio, MUSB_CSR0, +- csr | MUSB_CSR0_FLUSHFIFO); +- musb_writew(epio, MUSB_CSR0, +- csr | MUSB_CSR0_FLUSHFIFO); ++ musb_h_ep0_flush_fifo(hw_ep); + } + + /* target addr and (for multipoint) hub addr/port */ +@@ -1063,11 +1082,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) + csr &= ~MUSB_CSR0_H_NAKTIMEOUT; + musb_writew(epio, MUSB_CSR0, csr); + } else { +- csr |= MUSB_CSR0_FLUSHFIFO; +- musb_writew(epio, MUSB_CSR0, csr); +- musb_writew(epio, MUSB_CSR0, csr); +- csr &= ~MUSB_CSR0_H_NAKTIMEOUT; +- musb_writew(epio, MUSB_CSR0, csr); ++ musb_h_ep0_flush_fifo(hw_ep); + } + + musb_writeb(epio, MUSB_NAKLIMIT0, 0); +@@ -1081,9 +1096,6 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) + * SHOULD NEVER HAPPEN! */ + ERR("no URB for end 0\n"); + +- musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO); +- musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO); +- musb_writew(epio, MUSB_CSR0, 0); + + goto done; + } +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0010-musb-sanitize-clearing-TXCSR-DMA-bits-take-2.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0010-musb-sanitize-clearing-TXCSR-DMA-bits-take-2.patch new file mode 100644 index 000000000..bcbe3bbe3 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0010-musb-sanitize-clearing-TXCSR-DMA-bits-take-2.patch @@ -0,0 +1,361 @@ +From c99f4a68268801a2e2ffbef9766c3ac89e4fb22c Mon Sep 17 00:00:00 2001 +From: Sergei Shtylyov +Date: Thu, 26 Mar 2009 18:27:47 -0700 +Subject: [PATCH] musb: sanitize clearing TXCSR DMA bits (take 2) + +The MUSB code clears TXCSR_DMAMODE incorrectly in several +places, either asserting that TXCSR_DMAENAB is clear (when +sometimes it isn't) or clearing both bits together. Recent +versions of the programmer's guide require DMAENAB to be +cleared first, although some older ones didn't. + +Fix this and while at it: + + - In musb_gadget::txstate(), stop clearing the AUTOSET + and DMAMODE bits for the CPPI case since they never + get set anyway (the former bit is reserved on DaVinci); + but do clear the DMAENAB bit on the DMA error path. + + - In musb_host::musb_ep_program(), remove the duplicate + DMA controller specific code code clearing the TXCSR + previous state, add the code to clear TXCSR DMA bits + on the Inventra DMA error path, to replace such code + (executed late) on the PIO path. + + - In musbhsdma::dma_channel_abort()/dma_controller_irq(), + add/use the 'offset' variable to avoid MUSB_EP_OFFSET() + invocations on every RXCSR/TXCSR access. + +[dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org: don't introduce CamelCase, +shrink diff] + +Signed-off-by: Sergei Shtylyov +Signed-off-by: David Brownell +--- + drivers/usb/musb/musb_gadget.c | 33 +++++++++++------ + drivers/usb/musb/musb_host.c | 79 ++++++++++++++++------------------------ + drivers/usb/musb/musbhsdma.c | 59 ++++++++++++++++++------------ + 3 files changed, 90 insertions(+), 81 deletions(-) + +diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c +index c7ebd08..f79440c 100644 +--- a/drivers/usb/musb/musb_gadget.c ++++ b/drivers/usb/musb/musb_gadget.c +@@ -165,9 +165,15 @@ static void nuke(struct musb_ep *ep, const int status) + if (is_dma_capable() && ep->dma) { + struct dma_controller *c = ep->musb->dma_controller; + int value; ++ + if (ep->is_in) { ++ /* ++ * The programming guide says that we must not clear ++ * the DMAMODE bit before DMAENAB, so we only ++ * clear it in the second write... ++ */ + musb_writew(epio, MUSB_TXCSR, +- 0 | MUSB_TXCSR_FLUSHFIFO); ++ MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO); + musb_writew(epio, MUSB_TXCSR, + 0 | MUSB_TXCSR_FLUSHFIFO); + } else { +@@ -230,7 +236,7 @@ static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep) + | IN token(s) are recd from Host. + | -> DMA interrupt on completion + | calls TxAvail. +- | -> stop DMA, ~DmaEenab, ++ | -> stop DMA, ~DMAENAB, + | -> set TxPktRdy for last short pkt or zlp + | -> Complete Request + | -> Continue next request (call txstate) +@@ -315,9 +321,17 @@ static void txstate(struct musb *musb, struct musb_request *req) + request->dma, request_size); + if (use_dma) { + if (musb_ep->dma->desired_mode == 0) { +- /* ASSERT: DMAENAB is clear */ +- csr &= ~(MUSB_TXCSR_AUTOSET | +- MUSB_TXCSR_DMAMODE); ++ /* ++ * We must not clear the DMAMODE bit ++ * before the DMAENAB bit -- and the ++ * latter doesn't always get cleared ++ * before we get here... ++ */ ++ csr &= ~(MUSB_TXCSR_AUTOSET ++ | MUSB_TXCSR_DMAENAB); ++ musb_writew(epio, MUSB_TXCSR, csr ++ | MUSB_TXCSR_P_WZC_BITS); ++ csr &= ~MUSB_TXCSR_DMAMODE; + csr |= (MUSB_TXCSR_DMAENAB | + MUSB_TXCSR_MODE); + /* against programming guide */ +@@ -334,10 +348,7 @@ static void txstate(struct musb *musb, struct musb_request *req) + + #elif defined(CONFIG_USB_TI_CPPI_DMA) + /* program endpoint CSR first, then setup DMA */ +- csr &= ~(MUSB_TXCSR_AUTOSET +- | MUSB_TXCSR_DMAMODE +- | MUSB_TXCSR_P_UNDERRUN +- | MUSB_TXCSR_TXPKTRDY); ++ csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY); + csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB; + musb_writew(epio, MUSB_TXCSR, + (MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN) +@@ -364,8 +375,8 @@ static void txstate(struct musb *musb, struct musb_request *req) + if (!use_dma) { + c->channel_release(musb_ep->dma); + musb_ep->dma = NULL; +- /* ASSERT: DMAENAB clear */ +- csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE); ++ csr &= ~MUSB_TXCSR_DMAENAB; ++ musb_writew(epio, MUSB_TXCSR, csr); + /* invariant: prequest->buf is non-null */ + } + #elif defined(CONFIG_USB_TUSB_OMAP_DMA) +diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c +index a5d75aa..6591282 100644 +--- a/drivers/usb/musb/musb_host.c ++++ b/drivers/usb/musb/musb_host.c +@@ -590,10 +590,17 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) + csr = musb_readw(ep->regs, MUSB_TXCSR); + if (csr & MUSB_TXCSR_MODE) { + musb_h_tx_flush_fifo(ep); ++ csr = musb_readw(ep->regs, MUSB_TXCSR); + musb_writew(ep->regs, MUSB_TXCSR, +- MUSB_TXCSR_FRCDATATOG); ++ csr | MUSB_TXCSR_FRCDATATOG); + } +- /* clear mode (and everything else) to enable Rx */ ++ ++ /* ++ * Clear the MODE bit (and everything else) to enable Rx. ++ * NOTE: we mustn't clear the DMAMODE bit before DMAENAB. ++ */ ++ if (csr & MUSB_TXCSR_DMAMODE) ++ musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE); + musb_writew(ep->regs, MUSB_TXCSR, 0); + + /* scrub all previous state, clearing toggle */ +@@ -690,12 +697,17 @@ static void musb_ep_program(struct musb *musb, u8 epnum, + + /* general endpoint setup */ + if (epnum) { +- /* ASSERT: TXCSR_DMAENAB was already cleared */ +- + /* flush all old state, set default */ + musb_h_tx_flush_fifo(hw_ep); ++ ++ /* ++ * We must not clear the DMAMODE bit before or in ++ * the same cycle with the DMAENAB bit, so we clear ++ * the latter first... ++ */ + csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT +- | MUSB_TXCSR_DMAMODE ++ | MUSB_TXCSR_AUTOSET ++ | MUSB_TXCSR_DMAENAB + | MUSB_TXCSR_FRCDATATOG + | MUSB_TXCSR_H_RXSTALL + | MUSB_TXCSR_H_ERROR +@@ -703,16 +715,15 @@ static void musb_ep_program(struct musb *musb, u8 epnum, + ); + csr |= MUSB_TXCSR_MODE; + +- if (usb_gettoggle(urb->dev, +- qh->epnum, 1)) ++ if (usb_gettoggle(urb->dev, qh->epnum, 1)) + csr |= MUSB_TXCSR_H_WR_DATATOGGLE + | MUSB_TXCSR_H_DATATOGGLE; + else + csr |= MUSB_TXCSR_CLRDATATOG; + +- /* twice in case of double packet buffering */ + musb_writew(epio, MUSB_TXCSR, csr); + /* REVISIT may need to clear FLUSHFIFO ... */ ++ csr &= ~MUSB_TXCSR_DMAMODE; + musb_writew(epio, MUSB_TXCSR, csr); + csr = musb_readw(epio, MUSB_TXCSR); + } else { +@@ -755,34 +766,19 @@ static void musb_ep_program(struct musb *musb, u8 epnum, + + #ifdef CONFIG_USB_INVENTRA_DMA + if (dma_channel) { +- +- /* clear previous state */ +- csr = musb_readw(epio, MUSB_TXCSR); +- csr &= ~(MUSB_TXCSR_AUTOSET +- | MUSB_TXCSR_DMAMODE +- | MUSB_TXCSR_DMAENAB); +- csr |= MUSB_TXCSR_MODE; +- musb_writew(epio, MUSB_TXCSR, +- csr | MUSB_TXCSR_MODE); +- + qh->segsize = min(len, dma_channel->max_len); +- + if (qh->segsize <= packet_sz) + dma_channel->desired_mode = 0; + else + dma_channel->desired_mode = 1; + +- + if (dma_channel->desired_mode == 0) { +- csr &= ~(MUSB_TXCSR_AUTOSET +- | MUSB_TXCSR_DMAMODE); ++ /* Against the programming guide */ + csr |= (MUSB_TXCSR_DMAENAB); +- /* against programming guide */ + } else + csr |= (MUSB_TXCSR_AUTOSET + | MUSB_TXCSR_DMAENAB + | MUSB_TXCSR_DMAMODE); +- + musb_writew(epio, MUSB_TXCSR, csr); + + dma_ok = dma_controller->channel_program( +@@ -799,6 +795,17 @@ static void musb_ep_program(struct musb *musb, u8 epnum, + else + hw_ep->rx_channel = NULL; + dma_channel = NULL; ++ ++ /* ++ * The programming guide says that we must ++ * clear the DMAENAB bit before DMAMODE... ++ */ ++ csr = musb_readw(epio, MUSB_TXCSR); ++ csr &= ~(MUSB_TXCSR_DMAENAB ++ | MUSB_TXCSR_AUTOSET); ++ musb_writew(epio, MUSB_TXCSR, csr); ++ csr &= ~MUSB_TXCSR_DMAMODE; ++ musb_writew(epio, MUSB_TXCSR, csr); + } + } + #endif +@@ -806,18 +813,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum, + /* candidate for DMA */ + if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) { + +- /* program endpoint CSRs first, then setup DMA. +- * assume CPPI setup succeeds. +- * defer enabling dma. +- */ +- csr = musb_readw(epio, MUSB_TXCSR); +- csr &= ~(MUSB_TXCSR_AUTOSET +- | MUSB_TXCSR_DMAMODE +- | MUSB_TXCSR_DMAENAB); +- csr |= MUSB_TXCSR_MODE; +- musb_writew(epio, MUSB_TXCSR, +- csr | MUSB_TXCSR_MODE); +- ++ /* Defer enabling DMA */ + dma_channel->actual_len = 0L; + qh->segsize = len; + +@@ -846,20 +842,9 @@ static void musb_ep_program(struct musb *musb, u8 epnum, + } + + if (load_count) { +- /* ASSERT: TXCSR_DMAENAB was already cleared */ +- + /* PIO to load FIFO */ + qh->segsize = load_count; + musb_write_fifo(hw_ep, load_count, buf); +- csr = musb_readw(epio, MUSB_TXCSR); +- csr &= ~(MUSB_TXCSR_DMAENAB +- | MUSB_TXCSR_DMAMODE +- | MUSB_TXCSR_AUTOSET); +- /* write CSR */ +- csr |= MUSB_TXCSR_MODE; +- +- if (epnum) +- musb_writew(epio, MUSB_TXCSR, csr); + } + + /* re-enable interrupt */ +diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c +index 8662e9e..40709c3 100644 +--- a/drivers/usb/musb/musbhsdma.c ++++ b/drivers/usb/musb/musbhsdma.c +@@ -195,30 +195,32 @@ static int dma_channel_abort(struct dma_channel *channel) + void __iomem *mbase = musb_channel->controller->base; + + u8 bchannel = musb_channel->idx; ++ int offset; + u16 csr; + + if (channel->status == MUSB_DMA_STATUS_BUSY) { + if (musb_channel->transmit) { +- +- csr = musb_readw(mbase, +- MUSB_EP_OFFSET(musb_channel->epnum, +- MUSB_TXCSR)); +- csr &= ~(MUSB_TXCSR_AUTOSET | +- MUSB_TXCSR_DMAENAB | +- MUSB_TXCSR_DMAMODE); +- musb_writew(mbase, +- MUSB_EP_OFFSET(musb_channel->epnum, MUSB_TXCSR), +- csr); ++ offset = MUSB_EP_OFFSET(musb_channel->epnum, ++ MUSB_TXCSR); ++ ++ /* ++ * The programming guide says that we must clear ++ * the DMAENAB bit before the DMAMODE bit... ++ */ ++ csr = musb_readw(mbase, offset); ++ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB); ++ musb_writew(mbase, offset, csr); ++ csr &= ~MUSB_TXCSR_DMAMODE; ++ musb_writew(mbase, offset, csr); + } else { +- csr = musb_readw(mbase, +- MUSB_EP_OFFSET(musb_channel->epnum, +- MUSB_RXCSR)); ++ offset = MUSB_EP_OFFSET(musb_channel->epnum, ++ MUSB_RXCSR); ++ ++ csr = musb_readw(mbase, offset); + csr &= ~(MUSB_RXCSR_AUTOCLEAR | + MUSB_RXCSR_DMAENAB | + MUSB_RXCSR_DMAMODE); +- musb_writew(mbase, +- MUSB_EP_OFFSET(musb_channel->epnum, MUSB_RXCSR), +- csr); ++ musb_writew(mbase, offset, csr); + } + + musb_writew(mbase, +@@ -296,14 +298,25 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data) + && ((channel->desired_mode == 0) + || (channel->actual_len & + (musb_channel->max_packet_sz - 1))) +- ) { ++ ) { ++ u8 epnum = musb_channel->epnum; ++ int offset = MUSB_EP_OFFSET(epnum, ++ MUSB_TXCSR); ++ u16 txcsr; ++ ++ /* ++ * The programming guide says that we ++ * must clear DMAENAB before DMAMODE. ++ */ ++ musb_ep_select(mbase, epnum); ++ txcsr = musb_readw(mbase, offset); ++ txcsr &= ~(MUSB_TXCSR_DMAENAB ++ | MUSB_TXCSR_AUTOSET); ++ musb_writew(mbase, offset, txcsr); + /* Send out the packet */ +- musb_ep_select(mbase, +- musb_channel->epnum); +- musb_writew(mbase, MUSB_EP_OFFSET( +- musb_channel->epnum, +- MUSB_TXCSR), +- MUSB_TXCSR_TXPKTRDY); ++ txcsr &= ~MUSB_TXCSR_DMAMODE; ++ txcsr |= MUSB_TXCSR_TXPKTRDY; ++ musb_writew(mbase, offset, txcsr); + } else { + musb_dma_completion( + musb, +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0011-musb-fix-isochronous-TXDMA-take-2.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0011-musb-fix-isochronous-TXDMA-take-2.patch new file mode 100644 index 000000000..7d546e10b --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0011-musb-fix-isochronous-TXDMA-take-2.patch @@ -0,0 +1,417 @@ +From 035cd4a26e9b1638b4b0419b98409026176563ca Mon Sep 17 00:00:00 2001 +From: Sergei Shtylyov +Date: Thu, 26 Mar 2009 18:29:19 -0700 +Subject: [PATCH] musb: fix isochronous TXDMA (take 2) + +Multi-frame isochronous TX URBs transfers in DMA mode never +complete with CPPI DMA because musb_host_tx() doesn't restart +DMA on the second frame, only emitting a debug message. +With Inventra DMA they complete, but in PIO mode. To fix: + + - Factor out programming of the DMA transfer from + musb_ep_program() into musb_tx_dma_program(); + + - Reorder the code at the end of musb_host_tx() to + facilitate the fallback to PIO iff DMA fails; + + - Handle the buffer offset consistently for both + PIO and DMA modes; + + - Add an argument to musb_ep_program() for the same + reason (it only worked correctly with non-zero + offset of the first frame in PIO mode); + + - Set the completed isochronous frame descriptor's + 'actual_length' and 'status' fields correctly in + DMA mode. + +Also, since CPPI reportedly doesn't like sending isochronous +packets in the RNDIS mode, change the criterion for this +mode to be used only for multi-packet transfers. (There's +no need for that mode in the single-packet case anyway.) + +[ dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org: split comment paragraph +into bullet list, shrink patch delta, style tweaks ] + +Signed-off-by: Pavel Kiryukhin +Signed-off-by: Sergei Shtylyov +Signed-off-by: David Brownell +--- + drivers/usb/musb/cppi_dma.c | 1 + + drivers/usb/musb/musb_host.c | 227 +++++++++++++++++++----------------------- + 2 files changed, 105 insertions(+), 123 deletions(-) + +diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c +index 569ef0f..ac7227c 100644 +--- a/drivers/usb/musb/cppi_dma.c ++++ b/drivers/usb/musb/cppi_dma.c +@@ -579,6 +579,7 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx) + * trigger the "send a ZLP?" confusion. + */ + rndis = (maxpacket & 0x3f) == 0 ++ && length > maxpacket + && length < 0xffff + && (length % maxpacket) != 0; + +diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c +index 6591282..f6e84a0 100644 +--- a/drivers/usb/musb/musb_host.c ++++ b/drivers/usb/musb/musb_host.c +@@ -96,8 +96,8 @@ + + + static void musb_ep_program(struct musb *musb, u8 epnum, +- struct urb *urb, unsigned int nOut, +- u8 *buf, u32 len); ++ struct urb *urb, int is_out, ++ u8 *buf, u32 offset, u32 len); + + /* + * Clear TX fifo. Needed to avoid BABBLE errors. +@@ -189,9 +189,10 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) + { + u16 frame; + u32 len; +- void *buf; + void __iomem *mbase = musb->mregs; + struct urb *urb = next_urb(qh); ++ void *buf = urb->transfer_buffer; ++ u32 offset = 0; + struct musb_hw_ep *hw_ep = qh->hw_ep; + unsigned pipe = urb->pipe; + u8 address = usb_pipedevice(pipe); +@@ -214,7 +215,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) + case USB_ENDPOINT_XFER_ISOC: + qh->iso_idx = 0; + qh->frame = 0; +- buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset; ++ offset = urb->iso_frame_desc[0].offset; + len = urb->iso_frame_desc[0].length; + break; + default: /* bulk, interrupt */ +@@ -232,14 +233,14 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) + case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break; + default: s = "-intr"; break; + }; s; }), +- epnum, buf, len); ++ epnum, buf + offset, len); + + /* Configure endpoint */ + if (is_in || hw_ep->is_shared_fifo) + hw_ep->in_qh = qh; + else + hw_ep->out_qh = qh; +- musb_ep_program(musb, epnum, urb, !is_in, buf, len); ++ musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len); + + /* transmit may have more work: start it when it is time */ + if (is_in) +@@ -250,7 +251,6 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) + case USB_ENDPOINT_XFER_ISOC: + case USB_ENDPOINT_XFER_INT: + DBG(3, "check whether there's still time for periodic Tx\n"); +- qh->iso_idx = 0; + frame = musb_readw(mbase, MUSB_FRAME); + /* FIXME this doesn't implement that scheduling policy ... + * or handle framecounter wrapping +@@ -631,14 +631,68 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) + ep->rx_reinit = 0; + } + ++static bool musb_tx_dma_program(struct dma_controller *dma, ++ struct musb_hw_ep *hw_ep, struct musb_qh *qh, ++ struct urb *urb, u32 offset, u32 length) ++{ ++ struct dma_channel *channel = hw_ep->tx_channel; ++ void __iomem *epio = hw_ep->regs; ++ u16 pkt_size = qh->maxpacket; ++ u16 csr; ++ u8 mode; ++ ++#ifdef CONFIG_USB_INVENTRA_DMA ++ if (length > channel->max_len) ++ length = channel->max_len; ++ ++ csr = musb_readw(epio, MUSB_TXCSR); ++ if (length > pkt_size) { ++ mode = 1; ++ csr |= MUSB_TXCSR_AUTOSET ++ | MUSB_TXCSR_DMAMODE ++ | MUSB_TXCSR_DMAENAB; ++ } else { ++ mode = 0; ++ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE); ++ csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */ ++ } ++ channel->desired_mode = mode; ++ musb_writew(epio, MUSB_TXCSR, csr); ++#else ++ if (!is_cppi_enabled() && !tusb_dma_omap()) ++ return false; ++ ++ channel->actual_len = 0; ++ ++ /* ++ * TX uses "RNDIS" mode automatically but needs help ++ * to identify the zero-length-final-packet case. ++ */ ++ mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0; ++#endif ++ ++ qh->segsize = length; ++ ++ if (!dma->channel_program(channel, pkt_size, mode, ++ urb->transfer_dma + offset, length)) { ++ dma->channel_release(channel); ++ hw_ep->tx_channel = NULL; ++ ++ csr = musb_readw(epio, MUSB_TXCSR); ++ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB); ++ musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_H_WZC_BITS); ++ return false; ++ } ++ return true; ++} + + /* + * Program an HDRC endpoint as per the given URB + * Context: irqs blocked, controller lock held + */ + static void musb_ep_program(struct musb *musb, u8 epnum, +- struct urb *urb, unsigned int is_out, +- u8 *buf, u32 len) ++ struct urb *urb, int is_out, ++ u8 *buf, u32 offset, u32 len) + { + struct dma_controller *dma_controller; + struct dma_channel *dma_channel; +@@ -764,82 +818,9 @@ static void musb_ep_program(struct musb *musb, u8 epnum, + else + load_count = min((u32) packet_sz, len); + +-#ifdef CONFIG_USB_INVENTRA_DMA +- if (dma_channel) { +- qh->segsize = min(len, dma_channel->max_len); +- if (qh->segsize <= packet_sz) +- dma_channel->desired_mode = 0; +- else +- dma_channel->desired_mode = 1; +- +- if (dma_channel->desired_mode == 0) { +- /* Against the programming guide */ +- csr |= (MUSB_TXCSR_DMAENAB); +- } else +- csr |= (MUSB_TXCSR_AUTOSET +- | MUSB_TXCSR_DMAENAB +- | MUSB_TXCSR_DMAMODE); +- musb_writew(epio, MUSB_TXCSR, csr); +- +- dma_ok = dma_controller->channel_program( +- dma_channel, packet_sz, +- dma_channel->desired_mode, +- urb->transfer_dma, +- qh->segsize); +- if (dma_ok) { +- load_count = 0; +- } else { +- dma_controller->channel_release(dma_channel); +- if (is_out) +- hw_ep->tx_channel = NULL; +- else +- hw_ep->rx_channel = NULL; +- dma_channel = NULL; +- +- /* +- * The programming guide says that we must +- * clear the DMAENAB bit before DMAMODE... +- */ +- csr = musb_readw(epio, MUSB_TXCSR); +- csr &= ~(MUSB_TXCSR_DMAENAB +- | MUSB_TXCSR_AUTOSET); +- musb_writew(epio, MUSB_TXCSR, csr); +- csr &= ~MUSB_TXCSR_DMAMODE; +- musb_writew(epio, MUSB_TXCSR, csr); +- } +- } +-#endif +- +- /* candidate for DMA */ +- if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) { +- +- /* Defer enabling DMA */ +- dma_channel->actual_len = 0L; +- qh->segsize = len; +- +- /* TX uses "rndis" mode automatically, but needs help +- * to identify the zero-length-final-packet case. +- */ +- dma_ok = dma_controller->channel_program( +- dma_channel, packet_sz, +- (urb->transfer_flags +- & URB_ZERO_PACKET) +- == URB_ZERO_PACKET, +- urb->transfer_dma, +- qh->segsize); +- if (dma_ok) { +- load_count = 0; +- } else { +- dma_controller->channel_release(dma_channel); +- hw_ep->tx_channel = NULL; +- dma_channel = NULL; +- +- /* REVISIT there's an error path here that +- * needs handling: can't do dma, but +- * there's no pio buffer address... +- */ +- } +- } ++ if (dma_channel && musb_tx_dma_program(dma_controller, ++ hw_ep, qh, urb, offset, len)) ++ load_count = 0; + + if (load_count) { + /* PIO to load FIFO */ +@@ -899,7 +880,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum, + dma_channel, packet_sz, + !(urb->transfer_flags + & URB_SHORT_NOT_OK), +- urb->transfer_dma, ++ urb->transfer_dma + offset, + qh->segsize); + if (!dma_ok) { + dma_controller->channel_release( +@@ -1142,8 +1123,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) + int pipe; + bool done = false; + u16 tx_csr; +- size_t wLength = 0; +- u8 *buf = NULL; ++ size_t length = 0; ++ size_t offset = 0; + struct urb *urb; + struct musb_hw_ep *hw_ep = musb->endpoints + epnum; + void __iomem *epio = hw_ep->regs; +@@ -1161,7 +1142,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) + /* with CPPI, DMA sometimes triggers "extra" irqs */ + if (!urb) { + DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr); +- goto finish; ++ return; + } + + pipe = urb->pipe; +@@ -1198,7 +1179,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) + musb_writew(epio, MUSB_TXCSR, + MUSB_TXCSR_H_WZC_BITS + | MUSB_TXCSR_TXPKTRDY); +- goto finish; ++ return; + } + + if (status) { +@@ -1230,29 +1211,28 @@ void musb_host_tx(struct musb *musb, u8 epnum) + /* second cppi case */ + if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { + DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr); +- goto finish; +- ++ return; + } + +- /* REVISIT this looks wrong... */ + if (!status || dma || usb_pipeisoc(pipe)) { + if (dma) +- wLength = dma->actual_len; ++ length = dma->actual_len; + else +- wLength = qh->segsize; +- qh->offset += wLength; ++ length = qh->segsize; ++ qh->offset += length; + + if (usb_pipeisoc(pipe)) { + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; +- d->actual_length = qh->segsize; ++ d->actual_length = length; ++ d->status = status; + if (++qh->iso_idx >= urb->number_of_packets) { + done = true; + } else { + d++; +- buf = urb->transfer_buffer + d->offset; +- wLength = d->length; ++ offset = d->offset; ++ length = d->length; + } + } else if (dma) { + done = true; +@@ -1265,10 +1245,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) + & URB_ZERO_PACKET)) + done = true; + if (!done) { +- buf = urb->transfer_buffer +- + qh->offset; +- wLength = urb->transfer_buffer_length +- - qh->offset; ++ offset = qh->offset; ++ length = urb->transfer_buffer_length - offset; + } + } + } +@@ -1287,28 +1265,31 @@ void musb_host_tx(struct musb *musb, u8 epnum) + urb->status = status; + urb->actual_length = qh->offset; + musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT); ++ return; ++ } else if (usb_pipeisoc(pipe) && dma) { ++ if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb, ++ offset, length)) ++ return; ++ } else if (tx_csr & MUSB_TXCSR_DMAENAB) { ++ DBG(1, "not complete, but DMA enabled?\n"); ++ return; ++ } + +- } else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) { +- /* WARN_ON(!buf); */ +- +- /* REVISIT: some docs say that when hw_ep->tx_double_buffered, +- * (and presumably, fifo is not half-full) we should write TWO +- * packets before updating TXCSR ... other docs disagree ... +- */ +- /* PIO: start next packet in this URB */ +- if (wLength > qh->maxpacket) +- wLength = qh->maxpacket; +- musb_write_fifo(hw_ep, wLength, buf); +- qh->segsize = wLength; +- +- musb_ep_select(mbase, epnum); +- musb_writew(epio, MUSB_TXCSR, +- MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); +- } else +- DBG(1, "not complete, but dma enabled?\n"); ++ /* ++ * PIO: start next packet in this URB. ++ * ++ * REVISIT: some docs say that when hw_ep->tx_double_buffered, ++ * (and presumably, FIFO is not half-full) we should write *two* ++ * packets before updating TXCSR; other docs disagree... ++ */ ++ if (length > qh->maxpacket) ++ length = qh->maxpacket; ++ musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset); ++ qh->segsize = length; + +-finish: +- return; ++ musb_ep_select(mbase, epnum); ++ musb_writew(epio, MUSB_TXCSR, ++ MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); + } + + +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0012-musb-fix-possible-panic-while-resuming.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0012-musb-fix-possible-panic-while-resuming.patch new file mode 100644 index 000000000..2bbde84c1 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0012-musb-fix-possible-panic-while-resuming.patch @@ -0,0 +1,56 @@ +From b9a61b80ea89d9d6d78a23d96a28df94fd612298 Mon Sep 17 00:00:00 2001 +From: Kim Kyuwon +Date: Thu, 26 Mar 2009 18:56:51 -0700 +Subject: [PATCH] musb: fix possible panic while resuming + +During driver resume processing, musb could cause a kernel panic. +Fix by enabling the clock earlier, with the resume_early method. + +Signed-off-by: Kim Kyuwon +Signed-off-by: David Brownell +--- + drivers/usb/musb/musb_core.c | 8 ++------ + 1 files changed, 2 insertions(+), 6 deletions(-) + +diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c +index 338cd16..3019725 100644 +--- a/drivers/usb/musb/musb_core.c ++++ b/drivers/usb/musb/musb_core.c +@@ -2170,16 +2170,13 @@ static int musb_suspend(struct platform_device *pdev, pm_message_t message) + return 0; + } + +-static int musb_resume(struct platform_device *pdev) ++static int musb_resume_early(struct platform_device *pdev) + { +- unsigned long flags; + struct musb *musb = dev_to_musb(&pdev->dev); + + if (!musb->clock) + return 0; + +- spin_lock_irqsave(&musb->lock, flags); +- + if (musb->set_clock) + musb->set_clock(musb->clock, 1); + else +@@ -2189,7 +2186,6 @@ static int musb_resume(struct platform_device *pdev) + * unless for some reason the whole soc powered down and we're + * not treating that as a whole-system restart (e.g. swsusp) + */ +- spin_unlock_irqrestore(&musb->lock, flags); + return 0; + } + +@@ -2207,7 +2203,7 @@ static struct platform_driver musb_driver = { + .remove = __devexit_p(musb_remove), + .shutdown = musb_shutdown, + .suspend = musb_suspend, +- .resume = musb_resume, ++ .resume_early = musb_resume_early, + }; + + /*-------------------------------------------------------------------------*/ +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0013-musb_host-refactor-musb_save_toggle-take-2.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0013-musb_host-refactor-musb_save_toggle-take-2.patch new file mode 100644 index 000000000..0202871d4 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0013-musb_host-refactor-musb_save_toggle-take-2.patch @@ -0,0 +1,91 @@ +From 2658f7c9029967501cd4d749364f2e02d02eebd5 Mon Sep 17 00:00:00 2001 +From: Sergei Shtylyov +Date: Fri, 27 Mar 2009 12:54:21 -0700 +Subject: [PATCH] musb_host: refactor musb_save_toggle() (take 2) + +Refactor musb_save_toggle() as follows: + + - replace 'struct musb_hw_ep *ep' parameter by 'struct + musb_qh *qh' to avoid re-calculating this value + + - move usb_settogle() call out of the *if* operator. + +This is a net minor shrink of source and object code. + +Signed-off-by: Sergei Shtylyov +Signed-off-by: David Brownell +--- + drivers/usb/musb/musb_host.c | 35 ++++++++++++----------------------- + 1 files changed, 12 insertions(+), 23 deletions(-) + +diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c +index f6e84a0..dc32ce4 100644 +--- a/drivers/usb/musb/musb_host.c ++++ b/drivers/usb/musb/musb_host.c +@@ -318,35 +318,24 @@ __acquires(musb->lock) + spin_lock(&musb->lock); + } + +-/* for bulk/interrupt endpoints only */ +-static inline void +-musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb) ++/* For bulk/interrupt endpoints only */ ++static inline void musb_save_toggle(struct musb_qh *qh, int is_in, ++ struct urb *urb) + { +- struct usb_device *udev = urb->dev; ++ void __iomem *epio = qh->hw_ep->regs; + u16 csr; +- void __iomem *epio = ep->regs; +- struct musb_qh *qh; + +- /* FIXME: the current Mentor DMA code seems to have ++ /* ++ * FIXME: the current Mentor DMA code seems to have + * problems getting toggle correct. + */ + +- if (is_in || ep->is_shared_fifo) +- qh = ep->in_qh; ++ if (is_in) ++ csr = musb_readw(epio, MUSB_RXCSR) & MUSB_RXCSR_H_DATATOGGLE; + else +- qh = ep->out_qh; ++ csr = musb_readw(epio, MUSB_TXCSR) & MUSB_TXCSR_H_DATATOGGLE; + +- if (!is_in) { +- csr = musb_readw(epio, MUSB_TXCSR); +- usb_settoggle(udev, qh->epnum, 1, +- (csr & MUSB_TXCSR_H_DATATOGGLE) +- ? 1 : 0); +- } else { +- csr = musb_readw(epio, MUSB_RXCSR); +- usb_settoggle(udev, qh->epnum, 0, +- (csr & MUSB_RXCSR_H_DATATOGGLE) +- ? 1 : 0); +- } ++ usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0); + } + + /* caller owns controller lock, irqs are blocked */ +@@ -362,7 +351,7 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) + switch (qh->type) { + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: +- musb_save_toggle(ep, is_in, urb); ++ musb_save_toggle(qh, is_in, urb); + break; + case USB_ENDPOINT_XFER_ISOC: + if (status == 0 && urb->error_count) +@@ -1362,7 +1351,7 @@ static void musb_bulk_rx_nak_timeout(struct musb *musb, struct musb_hw_ep *ep) + urb->actual_length += dma->actual_len; + dma->actual_len = 0L; + } +- musb_save_toggle(ep, 1, urb); ++ musb_save_toggle(cur_qh, 1, urb); + + /* move cur_qh to end of queue */ + list_move_tail(&cur_qh->ring, &musb->in_bulk); +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0014-musb_gadget-suppress-parasitic-TX-interrupts-with.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0014-musb_gadget-suppress-parasitic-TX-interrupts-with.patch new file mode 100644 index 000000000..08e08a853 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0014-musb_gadget-suppress-parasitic-TX-interrupts-with.patch @@ -0,0 +1,32 @@ +From 7766f2ea909b73f56d21746485069e02839b75f1 Mon Sep 17 00:00:00 2001 +From: Sergei Shtylyov +Date: Fri, 27 Mar 2009 12:53:32 -0700 +Subject: [PATCH] musb_gadget: suppress "parasitic" TX interrupts with CPPI + +Suppress "parasitic" endpoint interrupts in the DMA mode +when using CPPI DMA driver; they're caused by the MUSB gadget +driver using the DMA request mode 0 instead of the mode 1. + +Signed-off-by: Sergei Shtylyov +Signed-off-by: David Brownell +--- + drivers/usb/musb/musb_gadget.c | 3 ++- + 1 files changed, 2 insertions(+), 1 deletions(-) + +diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c +index f79440c..bc197b2 100644 +--- a/drivers/usb/musb/musb_gadget.c ++++ b/drivers/usb/musb/musb_gadget.c +@@ -349,7 +349,8 @@ static void txstate(struct musb *musb, struct musb_request *req) + #elif defined(CONFIG_USB_TI_CPPI_DMA) + /* program endpoint CSR first, then setup DMA */ + csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY); +- csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB; ++ csr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_DMAMODE | ++ MUSB_TXCSR_MODE; + musb_writew(epio, MUSB_TXCSR, + (MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN) + | csr); +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0015-musb_gadget-fix-unhandled-endpoint-0-IRQs.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0015-musb_gadget-fix-unhandled-endpoint-0-IRQs.patch new file mode 100644 index 000000000..7115b152d --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0015-musb_gadget-fix-unhandled-endpoint-0-IRQs.patch @@ -0,0 +1,202 @@ +From 5424305125492a2417bde7c6d23ee4b84e25f6be Mon Sep 17 00:00:00 2001 +From: Sergei Shtylyov +Date: Fri, 27 Mar 2009 12:52:43 -0700 +Subject: [PATCH] musb_gadget: fix unhandled endpoint 0 IRQs + +The gadget EP0 code routinely ignores an interrupt at end of +the data phase because of musb_g_ep0_giveback() resetting the +state machine to "idle, waiting for SETUP" phase prematurely. + +The driver also prematurely leaves the status phase on +receiving the SetupEnd interrupt. + +As there were still unhandled endpoint 0 interrupts happening +from time to time after fixing these issues, there turned to +be yet another culprit: two distinct gadget states collapsed +into one. + +The (missing) state that comes after STATUS IN/OUT states was +typically indiscernible from them since the corresponding +interrupts tend to happen within too little period of time +(due to only a zero-length status packet in between) and so +they got coalesced; yet this state is not the same as the next +one which is associated with the reception of a SETUP packet. + +Adding this extra state seems to have fixed the rest of the +unhandled interrupts that generic_interrupt() and +davinci_interrupt() hid by faking their result and only +emitting a debug message -- so, stop doing that. + +Signed-off-by: Sergei Shtylyov +Signed-off-by: David Brownell +--- + drivers/usb/musb/davinci.c | 7 +---- + drivers/usb/musb/musb_core.c | 8 +----- + drivers/usb/musb/musb_core.h | 3 +- + drivers/usb/musb/musb_gadget_ep0.c | 45 +++++++++++++++++++++++++++++++---- + 4 files changed, 43 insertions(+), 20 deletions(-) + +diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c +index 2dc7606..399c435 100644 +--- a/drivers/usb/musb/davinci.c ++++ b/drivers/usb/musb/davinci.c +@@ -357,12 +357,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci) + + spin_unlock_irqrestore(&musb->lock, flags); + +- /* REVISIT we sometimes get unhandled IRQs +- * (e.g. ep0). not clear why... +- */ +- if (retval != IRQ_HANDLED) +- DBG(5, "unhandled? %08x\n", tmp); +- return IRQ_HANDLED; ++ return retval; + } + + int musb_platform_set_mode(struct musb *musb, u8 mode) +diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c +index 3019725..a1de43b 100644 +--- a/drivers/usb/musb/musb_core.c ++++ b/drivers/usb/musb/musb_core.c +@@ -1481,13 +1481,7 @@ static irqreturn_t generic_interrupt(int irq, void *__hci) + + spin_unlock_irqrestore(&musb->lock, flags); + +- /* REVISIT we sometimes get spurious IRQs on g_ep0 +- * not clear why... +- */ +- if (retval != IRQ_HANDLED) +- DBG(5, "spurious?\n"); +- +- return IRQ_HANDLED; ++ return retval; + } + + #else +diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h +index adf1806..f56a56c 100644 +--- a/drivers/usb/musb/musb_core.h ++++ b/drivers/usb/musb/musb_core.h +@@ -171,7 +171,8 @@ enum musb_h_ep0_state { + + /* peripheral side ep0 states */ + enum musb_g_ep0_state { +- MUSB_EP0_STAGE_SETUP, /* idle, waiting for setup */ ++ MUSB_EP0_STAGE_IDLE, /* idle, waiting for SETUP */ ++ MUSB_EP0_STAGE_SETUP, /* received SETUP */ + MUSB_EP0_STAGE_TX, /* IN data */ + MUSB_EP0_STAGE_RX, /* OUT data */ + MUSB_EP0_STAGE_STATUSIN, /* (after OUT data) */ +diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c +index 3f5e30d..ec0e899 100644 +--- a/drivers/usb/musb/musb_gadget_ep0.c ++++ b/drivers/usb/musb/musb_gadget_ep0.c +@@ -4,6 +4,7 @@ + * Copyright 2005 Mentor Graphics Corporation + * Copyright (C) 2005-2006 by Texas Instruments + * Copyright (C) 2006-2007 Nokia Corporation ++ * Copyright (C) 2008-2009 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License +@@ -58,7 +59,8 @@ + static char *decode_ep0stage(u8 stage) + { + switch (stage) { +- case MUSB_EP0_STAGE_SETUP: return "idle"; ++ case MUSB_EP0_STAGE_IDLE: return "idle"; ++ case MUSB_EP0_STAGE_SETUP: return "setup"; + case MUSB_EP0_STAGE_TX: return "in"; + case MUSB_EP0_STAGE_RX: return "out"; + case MUSB_EP0_STAGE_ACKWAIT: return "wait"; +@@ -628,7 +630,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb) + musb_writew(regs, MUSB_CSR0, + csr & ~MUSB_CSR0_P_SENTSTALL); + retval = IRQ_HANDLED; +- musb->ep0_state = MUSB_EP0_STAGE_SETUP; ++ musb->ep0_state = MUSB_EP0_STAGE_IDLE; + csr = musb_readw(regs, MUSB_CSR0); + } + +@@ -636,7 +638,18 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb) + if (csr & MUSB_CSR0_P_SETUPEND) { + musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SVDSETUPEND); + retval = IRQ_HANDLED; +- musb->ep0_state = MUSB_EP0_STAGE_SETUP; ++ /* Transition into the early status phase */ ++ switch (musb->ep0_state) { ++ case MUSB_EP0_STAGE_TX: ++ musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT; ++ break; ++ case MUSB_EP0_STAGE_RX: ++ musb->ep0_state = MUSB_EP0_STAGE_STATUSIN; ++ break; ++ default: ++ ERR("SetupEnd came in a wrong ep0stage %s", ++ decode_ep0stage(musb->ep0_state)); ++ } + csr = musb_readw(regs, MUSB_CSR0); + /* NOTE: request may need completion */ + } +@@ -697,11 +710,31 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb) + if (req) + musb_g_ep0_giveback(musb, req); + } ++ ++ /* ++ * In case when several interrupts can get coalesced, ++ * check to see if we've already received a SETUP packet... ++ */ ++ if (csr & MUSB_CSR0_RXPKTRDY) ++ goto setup; ++ ++ retval = IRQ_HANDLED; ++ musb->ep0_state = MUSB_EP0_STAGE_IDLE; ++ break; ++ ++ case MUSB_EP0_STAGE_IDLE: ++ /* ++ * This state is typically (but not always) indiscernible ++ * from the status states since the corresponding interrupts ++ * tend to happen within too little period of time (with only ++ * a zero-length packet in between) and so get coalesced... ++ */ + retval = IRQ_HANDLED; + musb->ep0_state = MUSB_EP0_STAGE_SETUP; + /* FALLTHROUGH */ + + case MUSB_EP0_STAGE_SETUP: ++setup: + if (csr & MUSB_CSR0_RXPKTRDY) { + struct usb_ctrlrequest setup; + int handled = 0; +@@ -783,7 +816,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb) + stall: + DBG(3, "stall (%d)\n", handled); + musb->ackpend |= MUSB_CSR0_P_SENDSTALL; +- musb->ep0_state = MUSB_EP0_STAGE_SETUP; ++ musb->ep0_state = MUSB_EP0_STAGE_IDLE; + finish: + musb_writew(regs, MUSB_CSR0, + musb->ackpend); +@@ -803,7 +836,7 @@ finish: + /* "can't happen" */ + WARN_ON(1); + musb_writew(regs, MUSB_CSR0, MUSB_CSR0_P_SENDSTALL); +- musb->ep0_state = MUSB_EP0_STAGE_SETUP; ++ musb->ep0_state = MUSB_EP0_STAGE_IDLE; + break; + } + +@@ -959,7 +992,7 @@ static int musb_g_ep0_halt(struct usb_ep *e, int value) + + csr |= MUSB_CSR0_P_SENDSTALL; + musb_writew(regs, MUSB_CSR0, csr); +- musb->ep0_state = MUSB_EP0_STAGE_SETUP; ++ musb->ep0_state = MUSB_EP0_STAGE_IDLE; + musb->ackpend = 0; + break; + default: +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0016-musb_host-factor-out-musb_ep_-get-set-_qh.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0016-musb_host-factor-out-musb_ep_-get-set-_qh.patch new file mode 100644 index 000000000..a2f54ff47 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0016-musb_host-factor-out-musb_ep_-get-set-_qh.patch @@ -0,0 +1,146 @@ +From f9ca8154cf395ec00129f12016697ef610a826ff Mon Sep 17 00:00:00 2001 +From: Sergei Shtylyov +Date: Fri, 27 Mar 2009 12:55:16 -0700 +Subject: [PATCH] musb_host: factor out musb_ep_{get|set}_qh() + +Factor out the often used code to get/set the active 'qh' +pointer for the hardware endpoint. Change the way the case +of a shared FIFO is handled by setting *both* 'in_qh' and +'out_qh' fields of 'struct musb_hw_ep'. That seems more +consistent and makes getting to the current 'qh' easy when +the code knows the direction beforehand. + +While at it, turn some assignments into intializers and +fix declaration style in the vicinity. + +Signed-off-by: Sergei Shtylyov +Signed-off-by: David Brownell +--- + drivers/usb/musb/musb_host.c | 56 ++++++++++++++++------------------------- + 1 files changed, 22 insertions(+), 34 deletions(-) + +diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c +index dc32ce4..bc89079 100644 +--- a/drivers/usb/musb/musb_host.c ++++ b/drivers/usb/musb/musb_host.c +@@ -178,6 +178,19 @@ static inline void cppi_host_txdma_start(struct musb_hw_ep *ep) + musb_writew(ep->regs, MUSB_TXCSR, txcsr); + } + ++static void musb_ep_set_qh(struct musb_hw_ep *ep, int is_in, struct musb_qh *qh) ++{ ++ if (is_in != 0 || ep->is_shared_fifo) ++ ep->in_qh = qh; ++ if (is_in == 0 || ep->is_shared_fifo) ++ ep->out_qh = qh; ++} ++ ++static struct musb_qh *musb_ep_get_qh(struct musb_hw_ep *ep, int is_in) ++{ ++ return is_in ? ep->in_qh : ep->out_qh; ++} ++ + /* + * Start the URB at the front of an endpoint's queue + * end must be claimed from the caller. +@@ -207,7 +220,6 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) + case USB_ENDPOINT_XFER_CONTROL: + /* control transfers always start with SETUP */ + is_in = 0; +- hw_ep->out_qh = qh; + musb->ep0_stage = MUSB_EP0_START; + buf = urb->setup_packet; + len = 8; +@@ -236,10 +248,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) + epnum, buf + offset, len); + + /* Configure endpoint */ +- if (is_in || hw_ep->is_shared_fifo) +- hw_ep->in_qh = qh; +- else +- hw_ep->out_qh = qh; ++ musb_ep_set_qh(hw_ep, is_in, qh); + musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len); + + /* transmit may have more work: start it when it is time */ +@@ -374,11 +383,8 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) + else + ep->tx_reinit = 1; + +- /* clobber old pointers to this qh */ +- if (is_in || ep->is_shared_fifo) +- ep->in_qh = NULL; +- else +- ep->out_qh = NULL; ++ /* Clobber old pointers to this qh */ ++ musb_ep_set_qh(ep, is_in, NULL); + qh->hep->hcpriv = NULL; + + switch (qh->type) { +@@ -421,12 +427,7 @@ static void + musb_advance_schedule(struct musb *musb, struct urb *urb, + struct musb_hw_ep *hw_ep, int is_in) + { +- struct musb_qh *qh; +- +- if (is_in || hw_ep->is_shared_fifo) +- qh = hw_ep->in_qh; +- else +- qh = hw_ep->out_qh; ++ struct musb_qh *qh = musb_ep_get_qh(hw_ep, is_in); + + if (urb->status == -EINPROGRESS) + qh = musb_giveback(qh, urb, 0); +@@ -689,15 +690,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum, + void __iomem *mbase = musb->mregs; + struct musb_hw_ep *hw_ep = musb->endpoints + epnum; + void __iomem *epio = hw_ep->regs; +- struct musb_qh *qh; +- u16 packet_sz; +- +- if (!is_out || hw_ep->is_shared_fifo) +- qh = hw_ep->in_qh; +- else +- qh = hw_ep->out_qh; +- +- packet_sz = qh->maxpacket; ++ struct musb_qh *qh = musb_ep_get_qh(hw_ep, !is_out); ++ u16 packet_sz = qh->maxpacket; + + DBG(3, "%s hw%d urb %p spd%d dev%d ep%d%s " + "h_addr%02x h_port%02x bytes %d\n", +@@ -1114,17 +1108,14 @@ void musb_host_tx(struct musb *musb, u8 epnum) + u16 tx_csr; + size_t length = 0; + size_t offset = 0; +- struct urb *urb; + struct musb_hw_ep *hw_ep = musb->endpoints + epnum; + void __iomem *epio = hw_ep->regs; +- struct musb_qh *qh = hw_ep->is_shared_fifo ? hw_ep->in_qh +- : hw_ep->out_qh; ++ struct musb_qh *qh = hw_ep->out_qh; ++ struct urb *urb = next_urb(qh); + u32 status = 0; + void __iomem *mbase = musb->mregs; + struct dma_channel *dma; + +- urb = next_urb(qh); +- + musb_ep_select(mbase, epnum); + tx_csr = musb_readw(epio, MUSB_TXCSR); + +@@ -1741,10 +1732,7 @@ static int musb_schedule( + epnum++, hw_ep++) { + int diff; + +- if (is_in || hw_ep->is_shared_fifo) { +- if (hw_ep->in_qh != NULL) +- continue; +- } else if (hw_ep->out_qh != NULL) ++ if (musb_ep_get_qh(hw_ep, is_in) != NULL) + continue; + + if (hw_ep == musb->bulk_ep) +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0017-musb_host-refactor-URB-giveback.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0017-musb_host-refactor-URB-giveback.patch new file mode 100644 index 000000000..4a520dff8 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0017-musb_host-refactor-URB-giveback.patch @@ -0,0 +1,132 @@ +From 013056a09afd324e729d64b9a0e66a004604e1d6 Mon Sep 17 00:00:00 2001 +From: Sergei Shtylyov +Date: Fri, 27 Mar 2009 12:58:31 -0700 +Subject: [PATCH] musb_host: refactor URB giveback + +As musb_advance_schedule() is now the only remaning +caller of musb_giveback() (and the only valid context +of such call), just fold the latter into the former +and then rename __musb_giveback() into musb_giveback(). + +This is a net minor shrink. + +Signed-off-by: Sergei Shtylyov +Signed-off-by: David Brownell +--- + drivers/usb/musb/musb_host.c | 54 +++++++++++++++-------------------------- + 1 files changed, 20 insertions(+), 34 deletions(-) + +diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c +index bc89079..e833959 100644 +--- a/drivers/usb/musb/musb_host.c ++++ b/drivers/usb/musb/musb_host.c +@@ -292,9 +292,8 @@ start: + } + } + +-/* caller owns controller lock, irqs are blocked */ +-static void +-__musb_giveback(struct musb *musb, struct urb *urb, int status) ++/* Context: caller owns controller lock, IRQs are blocked */ ++static void musb_giveback(struct musb *musb, struct urb *urb, int status) + __releases(musb->lock) + __acquires(musb->lock) + { +@@ -347,14 +346,22 @@ static inline void musb_save_toggle(struct musb_qh *qh, int is_in, + usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0); + } + +-/* caller owns controller lock, irqs are blocked */ +-static struct musb_qh * +-musb_giveback(struct musb_qh *qh, struct urb *urb, int status) ++/* ++ * Advance this hardware endpoint's queue, completing the specified URB and ++ * advancing to either the next URB queued to that qh, or else invalidating ++ * that qh and advancing to the next qh scheduled after the current one. ++ * ++ * Context: caller owns controller lock, IRQs are blocked ++ */ ++static void musb_advance_schedule(struct musb *musb, struct urb *urb, ++ struct musb_hw_ep *hw_ep, int is_in) + { ++ struct musb_qh *qh = musb_ep_get_qh(hw_ep, is_in); + struct musb_hw_ep *ep = qh->hw_ep; +- struct musb *musb = ep->musb; +- int is_in = usb_pipein(urb->pipe); + int ready = qh->is_ready; ++ int status; ++ ++ status = (urb->status == -EINPROGRESS) ? 0 : urb->status; + + /* save toggle eagerly, for paranoia */ + switch (qh->type) { +@@ -363,13 +370,13 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) + musb_save_toggle(qh, is_in, urb); + break; + case USB_ENDPOINT_XFER_ISOC: +- if (status == 0 && urb->error_count) ++ if (urb->error_count) + status = -EXDEV; + break; + } + + qh->is_ready = 0; +- __musb_giveback(musb, urb, status); ++ musb_giveback(musb, urb, status); + qh->is_ready = ready; + + /* reclaim resources (and bandwidth) ASAP; deschedule it, and +@@ -413,31 +420,10 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) + break; + } + } +- return qh; +-} +- +-/* +- * Advance this hardware endpoint's queue, completing the specified urb and +- * advancing to either the next urb queued to that qh, or else invalidating +- * that qh and advancing to the next qh scheduled after the current one. +- * +- * Context: caller owns controller lock, irqs are blocked +- */ +-static void +-musb_advance_schedule(struct musb *musb, struct urb *urb, +- struct musb_hw_ep *hw_ep, int is_in) +-{ +- struct musb_qh *qh = musb_ep_get_qh(hw_ep, is_in); +- +- if (urb->status == -EINPROGRESS) +- qh = musb_giveback(qh, urb, 0); +- else +- qh = musb_giveback(qh, urb, urb->status); + + if (qh != NULL && qh->is_ready) { + DBG(4, "... next ep%d %cX urb %p\n", +- hw_ep->epnum, is_in ? 'R' : 'T', +- next_urb(qh)); ++ hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh)); + musb_start_urb(musb, is_in, qh); + } + } +@@ -2080,7 +2066,7 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) + + ret = 0; + qh->is_ready = 0; +- __musb_giveback(musb, urb, 0); ++ musb_giveback(musb, urb, 0); + qh->is_ready = ready; + + /* If nothing else (usually musb_giveback) is using it +@@ -2164,7 +2150,7 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) + * will activate any of these as it advances. + */ + while (!list_empty(&hep->urb_list)) +- __musb_giveback(musb, next_urb(qh), -ESHUTDOWN); ++ musb_giveback(musb, next_urb(qh), -ESHUTDOWN); + + hep->hcpriv = NULL; + list_del(&qh->ring); +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0018-musb-split-out-CPPI-interrupt-handler.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0018-musb-split-out-CPPI-interrupt-handler.patch new file mode 100644 index 000000000..bf3d6e702 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0018-musb-split-out-CPPI-interrupt-handler.patch @@ -0,0 +1,167 @@ +From b91b067c531c9322f3719951b07303e790b13475 Mon Sep 17 00:00:00 2001 +From: Sergei Shtylyov +Date: Fri, 27 Mar 2009 12:59:46 -0700 +Subject: [PATCH] musb: split out CPPI interrupt handler + +As DaVinci DM646x has a dedicated CPPI DMA interrupt, replace +cppi_completion() (which has always been kind of layering +violation) by a complete CPPI interrupt handler. + +[ dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org: only cppi_dma.c needs platform +device header, not cppi_dma.h ] + +Signed-off-by: Dmitry Krivoschekov +Signed-off-by: Sergei Shtylyov +Signed-off-by: David Brownell +--- + drivers/usb/musb/cppi_dma.c | 34 +++++++++++++++++++++++++++++++--- + drivers/usb/musb/cppi_dma.h | 6 ++++-- + drivers/usb/musb/davinci.c | 14 ++++---------- + 3 files changed, 39 insertions(+), 15 deletions(-) + +diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c +index ac7227c..6ff3c67 100644 +--- a/drivers/usb/musb/cppi_dma.c ++++ b/drivers/usb/musb/cppi_dma.c +@@ -6,6 +6,7 @@ + * The TUSB6020, using VLYNQ, has CPPI that looks much like DaVinci. + */ + ++#include + #include + + #include "musb_core.h" +@@ -1145,17 +1146,27 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch) + return completed; + } + +-void cppi_completion(struct musb *musb, u32 rx, u32 tx) ++irqreturn_t cppi_interrupt(int irq, void *dev_id) + { +- void __iomem *tibase; +- int i, index; ++ struct musb *musb = dev_id; + struct cppi *cppi; ++ void __iomem *tibase; + struct musb_hw_ep *hw_ep = NULL; ++ u32 rx, tx; ++ int i, index; + + cppi = container_of(musb->dma_controller, struct cppi, controller); + + tibase = musb->ctrl_base; + ++ tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG); ++ rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG); ++ ++ if (!tx && !rx) ++ return IRQ_NONE; ++ ++ DBG(4, "CPPI IRQ Tx%x Rx%x\n", tx, rx); ++ + /* process TX channels */ + for (index = 0; tx; tx = tx >> 1, index++) { + struct cppi_channel *tx_ch; +@@ -1293,6 +1304,8 @@ void cppi_completion(struct musb *musb, u32 rx, u32 tx) + + /* write to CPPI EOI register to re-enable interrupts */ + musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0); ++ ++ return IRQ_HANDLED; + } + + /* Instantiate a software object representing a DMA controller. */ +@@ -1300,6 +1313,9 @@ struct dma_controller *__init + dma_controller_create(struct musb *musb, void __iomem *mregs) + { + struct cppi *controller; ++ struct device *dev = musb->controller; ++ struct platform_device *pdev = to_platform_device(dev); ++ int irq = platform_get_irq(pdev, 1); + + controller = kzalloc(sizeof *controller, GFP_KERNEL); + if (!controller) +@@ -1330,6 +1346,15 @@ dma_controller_create(struct musb *musb, void __iomem *mregs) + return NULL; + } + ++ if (irq > 0) { ++ if (request_irq(irq, cppi_interrupt, 0, "cppi-dma", musb)) { ++ dev_err(dev, "request_irq %d failed!\n", irq); ++ dma_controller_destroy(&controller->controller); ++ return NULL; ++ } ++ controller->irq = irq; ++ } ++ + return &controller->controller; + } + +@@ -1342,6 +1367,9 @@ void dma_controller_destroy(struct dma_controller *c) + + cppi = container_of(c, struct cppi, controller); + ++ if (cppi->irq) ++ free_irq(cppi->irq, cppi->musb); ++ + /* assert: caller stopped the controller first */ + dma_pool_destroy(cppi->pool); + +diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h +index 729b407..8a39de3 100644 +--- a/drivers/usb/musb/cppi_dma.h ++++ b/drivers/usb/musb/cppi_dma.h +@@ -119,6 +119,8 @@ struct cppi { + void __iomem *mregs; /* Mentor regs */ + void __iomem *tibase; /* TI/CPPI regs */ + ++ int irq; ++ + struct cppi_channel tx[4]; + struct cppi_channel rx[4]; + +@@ -127,7 +129,7 @@ struct cppi { + struct list_head tx_complete; + }; + +-/* irq handling hook */ +-extern void cppi_completion(struct musb *, u32 rx, u32 tx); ++/* CPPI IRQ handler */ ++extern irqreturn_t cppi_interrupt(int, void *); + + #endif /* end of ifndef _CPPI_DMA_H_ */ +diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c +index 399c435..9fd74bf 100644 +--- a/drivers/usb/musb/davinci.c ++++ b/drivers/usb/musb/davinci.c +@@ -250,6 +250,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci) + irqreturn_t retval = IRQ_NONE; + struct musb *musb = __hci; + void __iomem *tibase = musb->ctrl_base; ++ struct cppi *cppi; + u32 tmp; + + spin_lock_irqsave(&musb->lock, flags); +@@ -266,16 +267,9 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci) + /* CPPI interrupts share the same IRQ line, but have their own + * mask, state, "vector", and EOI registers. + */ +- if (is_cppi_enabled()) { +- u32 cppi_tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG); +- u32 cppi_rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG); +- +- if (cppi_tx || cppi_rx) { +- DBG(4, "CPPI IRQ t%x r%x\n", cppi_tx, cppi_rx); +- cppi_completion(musb, cppi_rx, cppi_tx); +- retval = IRQ_HANDLED; +- } +- } ++ cppi = container_of(musb->dma_controller, struct cppi, controller); ++ if (is_cppi_enabled() && musb->dma_controller && !cppi->irq) ++ retval = cppi_interrupt(irq, __hci); + + /* ack and handle non-CPPI interrupts */ + tmp = musb_readl(tibase, DAVINCI_USB_INT_SRC_MASKED_REG); +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0019-musb_host-simplify-check-for-active-URB.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0019-musb_host-simplify-check-for-active-URB.patch new file mode 100644 index 000000000..c0e57155c --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0019-musb_host-simplify-check-for-active-URB.patch @@ -0,0 +1,158 @@ +From 69242ddd26151d45f46011cf7abc581b14699fb2 Mon Sep 17 00:00:00 2001 +From: Sergei Shtylyov +Date: Fri, 27 Mar 2009 12:56:26 -0700 +Subject: [PATCH] musb_host: simplify check for active URB + +The existance of the scheduling list shouldn't matter in +determining whether there's currectly an URB executing on a +hardware endpoint. What should actually matter is the 'in_qh' +or 'out_qh' fields of the 'struct musb_hw_ep' -- those are +set in musb_start_urb() and cleared in musb_giveback() when +the endpoint's URB list drains. Hence we should be able to +replace the big *switch* statements in musb_urb_dequeue() +and musb_h_disable() with mere musb_ep_get_qh() calls... + +While at it, do some more changes: + + - add 'is_in' variable to musb_urb_dequeue(); + + - remove the unnecessary 'epnum' variable from musb_h_disable(); + + - fix the comment style in the vicinity. + +This is a minor shrink of source and object code. + +Signed-off-by: Sergei Shtylyov +Signed-off-by: David Brownell +--- + drivers/usb/musb/musb_host.c | 72 ++++++++--------------------------------- + 1 files changed, 14 insertions(+), 58 deletions(-) + +diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c +index e833959..e121e0e 100644 +--- a/drivers/usb/musb/musb_host.c ++++ b/drivers/usb/musb/musb_host.c +@@ -2008,14 +2008,14 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) + { + struct musb *musb = hcd_to_musb(hcd); + struct musb_qh *qh; +- struct list_head *sched; + unsigned long flags; ++ int is_in = usb_pipein(urb->pipe); + int ret; + + DBG(4, "urb=%p, dev%d ep%d%s\n", urb, + usb_pipedevice(urb->pipe), + usb_pipeendpoint(urb->pipe), +- usb_pipein(urb->pipe) ? "in" : "out"); ++ is_in ? "in" : "out"); + + spin_lock_irqsave(&musb->lock, flags); + ret = usb_hcd_check_unlink_urb(hcd, urb, status); +@@ -2026,45 +2026,23 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) + if (!qh) + goto done; + +- /* Any URB not actively programmed into endpoint hardware can be ++ /* ++ * Any URB not actively programmed into endpoint hardware can be + * immediately given back; that's any URB not at the head of an + * endpoint queue, unless someday we get real DMA queues. And even + * if it's at the head, it might not be known to the hardware... + * +- * Otherwise abort current transfer, pending dma, etc.; urb->status ++ * Otherwise abort current transfer, pending DMA, etc.; urb->status + * has already been updated. This is a synchronous abort; it'd be + * OK to hold off until after some IRQ, though. ++ * ++ * NOTE: qh is invalid unless !list_empty(&hep->urb_list) + */ +- if (!qh->is_ready || urb->urb_list.prev != &qh->hep->urb_list) +- ret = -EINPROGRESS; +- else { +- switch (qh->type) { +- case USB_ENDPOINT_XFER_CONTROL: +- sched = &musb->control; +- break; +- case USB_ENDPOINT_XFER_BULK: +- if (qh->mux == 1) { +- if (usb_pipein(urb->pipe)) +- sched = &musb->in_bulk; +- else +- sched = &musb->out_bulk; +- break; +- } +- default: +- /* REVISIT when we get a schedule tree, periodic +- * transfers won't always be at the head of a +- * singleton queue... +- */ +- sched = NULL; +- break; +- } +- } +- +- /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */ +- if (ret < 0 || (sched && qh != first_qh(sched))) { ++ if (!qh->is_ready ++ || urb->urb_list.prev != &qh->hep->urb_list ++ || musb_ep_get_qh(qh->hw_ep, is_in) != qh) { + int ready = qh->is_ready; + +- ret = 0; + qh->is_ready = 0; + musb_giveback(musb, urb, 0); + qh->is_ready = ready; +@@ -2088,13 +2066,11 @@ done: + static void + musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) + { +- u8 epnum = hep->desc.bEndpointAddress; ++ u8 is_in = hep->desc.bEndpointAddress & USB_DIR_IN; + unsigned long flags; + struct musb *musb = hcd_to_musb(hcd); +- u8 is_in = epnum & USB_DIR_IN; + struct musb_qh *qh; + struct urb *urb; +- struct list_head *sched; + + spin_lock_irqsave(&musb->lock, flags); + +@@ -2102,31 +2078,11 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) + if (qh == NULL) + goto exit; + +- switch (qh->type) { +- case USB_ENDPOINT_XFER_CONTROL: +- sched = &musb->control; +- break; +- case USB_ENDPOINT_XFER_BULK: +- if (qh->mux == 1) { +- if (is_in) +- sched = &musb->in_bulk; +- else +- sched = &musb->out_bulk; +- break; +- } +- default: +- /* REVISIT when we get a schedule tree, periodic transfers +- * won't always be at the head of a singleton queue... +- */ +- sched = NULL; +- break; +- } +- +- /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */ ++ /* NOTE: qh is invalid unless !list_empty(&hep->urb_list) */ + +- /* kick first urb off the hardware, if needed */ ++ /* Kick the first URB off the hardware, if needed */ + qh->is_ready = 0; +- if (!sched || qh == first_qh(sched)) { ++ if (musb_ep_get_qh(qh->hw_ep, is_in) == qh) { + urb = next_urb(qh); + + /* make software (then hardware) stop ASAP */ +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0020-musb_host-streamline-musb_cleanup_urb-calls.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0020-musb_host-streamline-musb_cleanup_urb-calls.patch new file mode 100644 index 000000000..d89eaadd6 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0020-musb_host-streamline-musb_cleanup_urb-calls.patch @@ -0,0 +1,58 @@ +From d408894fa4263440ed8a9e68566bacea7e6f6bed Mon Sep 17 00:00:00 2001 +From: Sergei Shtylyov +Date: Fri, 27 Mar 2009 12:57:50 -0700 +Subject: [PATCH] musb_host: streamline musb_cleanup_urb() calls + +The argument for the 'is_in' parameter of musb_cleanup_urb() +is always extracted from an URB that's passed to the function. +So that parameter is superfluous; remove it. + +Signed-off-by: Sergei Shtylyov +Signed-off-by: David Brownell +--- + drivers/usb/musb/musb_host.c | 9 +++++---- + 1 files changed, 5 insertions(+), 4 deletions(-) + +diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c +index e121e0e..71e835e 100644 +--- a/drivers/usb/musb/musb_host.c ++++ b/drivers/usb/musb/musb_host.c +@@ -1950,14 +1950,15 @@ done: + * called with controller locked, irqs blocked + * that hardware queue advances to the next transfer, unless prevented + */ +-static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in) ++static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh) + { + struct musb_hw_ep *ep = qh->hw_ep; + void __iomem *epio = ep->regs; + unsigned hw_end = ep->epnum; + void __iomem *regs = ep->musb->mregs; +- u16 csr; ++ int is_in = usb_pipein(urb->pipe); + int status = 0; ++ u16 csr; + + musb_ep_select(regs, hw_end); + +@@ -2056,7 +2057,7 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) + kfree(qh); + } + } else +- ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN); ++ ret = musb_cleanup_urb(urb, qh); + done: + spin_unlock_irqrestore(&musb->lock, flags); + return ret; +@@ -2090,7 +2091,7 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) + urb->status = -ESHUTDOWN; + + /* cleanup */ +- musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN); ++ musb_cleanup_urb(urb, qh); + + /* Then nuke all the others ... and advance the + * queue on hw_ep (e.g. bulk ring) when we're done. +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0021-twl4030-usb-fix-minor-reporting-goofage.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0021-twl4030-usb-fix-minor-reporting-goofage.patch new file mode 100644 index 000000000..d9733f92b --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0021-twl4030-usb-fix-minor-reporting-goofage.patch @@ -0,0 +1,70 @@ +From c4804e5a447275553c55bbb0ab1748954cb8fbfc Mon Sep 17 00:00:00 2001 +From: David Brownell +Date: Tue, 31 Mar 2009 12:26:10 -0700 +Subject: [PATCH] twl4030-usb: fix minor reporting goofage + +Fix a reporting glitch in the twl4030 USB transceiver code. +It wasn't properly distinguishing the two types of active +USB link: ID grounded, vs not. In the current code that +distinction doesn't much matter; in the future this bugfix +should help support better USB controller communications. + +Provide a comment sorting out some of the cryptic bits of +the manual: different sections use different names for +key signals, and the register definitions don't help much +without the explanations and diagrams. + +Signed-off-by: David Brownell +--- + drivers/usb/otg/twl4030-usb.c | 26 +++++++++++++++++++------- + 1 files changed, 19 insertions(+), 7 deletions(-) + +diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c +index d9478d0..f740390 100644 +--- a/drivers/usb/otg/twl4030-usb.c ++++ b/drivers/usb/otg/twl4030-usb.c +@@ -217,6 +217,7 @@ + + /* In module TWL4030_MODULE_PM_MASTER */ + #define PROTECT_KEY 0x0E ++#define STS_HW_CONDITIONS 0x0F + + /* In module TWL4030_MODULE_PM_RECEIVER */ + #define VUSB_DEDICATED1 0x7D +@@ -351,15 +352,26 @@ static enum linkstat twl4030_usb_linkstat(struct twl4030_usb *twl) + int status; + int linkstat = USB_LINK_UNKNOWN; + +- /* STS_HW_CONDITIONS */ +- status = twl4030_readb(twl, TWL4030_MODULE_PM_MASTER, 0x0f); ++ /* ++ * For ID/VBUS sensing, see manual section 15.4.8 ... ++ * except when using only battery backup power, two ++ * comparators produce VBUS_PRES and ID_PRES signals, ++ * which don't match docs elsewhere. But ... BIT(7) ++ * and BIT(2) of STS_HW_CONDITIONS, respectively, do ++ * seem to match up. If either is true the USB_PRES ++ * signal is active, the OTG module is activated, and ++ * its interrupt may be raised (may wake the system). ++ */ ++ status = twl4030_readb(twl, TWL4030_MODULE_PM_MASTER, ++ STS_HW_CONDITIONS); + if (status < 0) + dev_err(twl->dev, "USB link status err %d\n", status); +- else if (status & BIT(7)) +- linkstat = USB_LINK_VBUS; +- else if (status & BIT(2)) +- linkstat = USB_LINK_ID; +- else ++ else if (status & (BIT(7) | BIT(2))) { ++ if (status & BIT(2)) ++ linkstat = USB_LINK_ID; ++ else ++ linkstat = USB_LINK_VBUS; ++ } else + linkstat = USB_LINK_NONE; + + dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n", +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0022-musb-use-dma-mode-1-for-TX-if-transfer-size-equals.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0022-musb-use-dma-mode-1-for-TX-if-transfer-size-equals.patch new file mode 100644 index 000000000..16b5b9908 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0022-musb-use-dma-mode-1-for-TX-if-transfer-size-equals.patch @@ -0,0 +1,38 @@ +From ba59a0812ba0e223bd0af8f4dea6c971b6289696 Mon Sep 17 00:00:00 2001 +From: Anand Gadiyar +Date: Thu, 2 Apr 2009 12:07:08 -0700 +Subject: [PATCH] musb: use dma mode 1 for TX if transfer size equals maxpacket (v2) + +Currently, with Inventra DMA, we use Mode 0 if transfer size is less +than or equal to the endpoint's maxpacket size. This requires that +we explicitly set TXPKTRDY for that transfer. + +However the musb_g_tx code will not set TXPKTRDY twice if the last +transfer is exactly equal to maxpacket, even if request->zero is set. +Using Mode 1 will solve this; a better fix might be in musb_g_tx(). + +Without this change, musb will not correctly send out a ZLP if the +last transfer is the maxpacket size and request->zero is set. + +Signed-off-by: Anand Gadiyar +Signed-off-by: David Brownell +--- + drivers/usb/musb/musb_gadget.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c +index bc197b2..e8f920c 100644 +--- a/drivers/usb/musb/musb_gadget.c ++++ b/drivers/usb/musb/musb_gadget.c +@@ -310,7 +310,7 @@ static void txstate(struct musb *musb, struct musb_request *req) + /* setup DMA, then program endpoint CSR */ + request_size = min(request->length, + musb_ep->dma->max_len); +- if (request_size <= musb_ep->packet_sz) ++ if (request_size < musb_ep->packet_sz) + musb_ep->dma->desired_mode = 0; + else + musb_ep->dma->desired_mode = 1; +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0023-musb-add-high-bandwidth-ISO-support.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0023-musb-add-high-bandwidth-ISO-support.patch new file mode 100644 index 000000000..3038dd171 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0023-musb-add-high-bandwidth-ISO-support.patch @@ -0,0 +1,187 @@ +From 2e049a88b729ae2fdc0ecdabad1857810bd62737 Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta +Date: Fri, 3 Apr 2009 16:16:17 -0700 +Subject: [PATCH] musb: add high bandwidth ISO support + +Tested on OMAP3 host side with Creative (Live! Cam Optia) USB camera +which uses high bandwidth isochronous IN endpoints. FIFO mode 4 is +updated to provide the needed 4K endpoint buffer without breaking +the g_nokia composite gadget configuration. (This is the only +gadget driver known to use enough endpoints to notice the change.) + +Signed-off-by: Ajay Kumar Gupta +Signed-off-by: David Brownell +--- + drivers/usb/musb/musb_core.c | 19 ++++++++--------- + drivers/usb/musb/musb_core.h | 3 ++ + drivers/usb/musb/musb_host.c | 47 +++++++++++++++++++++++++++++++---------- + drivers/usb/musb/musb_host.h | 1 + + 4 files changed, 48 insertions(+), 22 deletions(-) + +diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c +index a1de43b..d953305 100644 +--- a/drivers/usb/musb/musb_core.c ++++ b/drivers/usb/musb/musb_core.c +@@ -1068,14 +1068,13 @@ static struct fifo_cfg __initdata mode_4_cfg[] = { + { .hw_ep_num = 8, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 9, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 9, .style = FIFO_RX, .maxpacket = 512, }, +-{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 512, }, +-{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 512, }, +-{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 512, }, +-{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 512, }, +-{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 512, }, +-{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 512, }, +-{ .hw_ep_num = 13, .style = FIFO_TX, .maxpacket = 512, }, +-{ .hw_ep_num = 13, .style = FIFO_RX, .maxpacket = 512, }, ++{ .hw_ep_num = 10, .style = FIFO_TX, .maxpacket = 256, }, ++{ .hw_ep_num = 10, .style = FIFO_RX, .maxpacket = 64, }, ++{ .hw_ep_num = 11, .style = FIFO_TX, .maxpacket = 256, }, ++{ .hw_ep_num = 11, .style = FIFO_RX, .maxpacket = 64, }, ++{ .hw_ep_num = 12, .style = FIFO_TX, .maxpacket = 256, }, ++{ .hw_ep_num = 12, .style = FIFO_RX, .maxpacket = 64, }, ++{ .hw_ep_num = 13, .style = FIFO_RXTX, .maxpacket = 4096, }, + { .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, }, + { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, }, + }; +@@ -1335,11 +1334,11 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) + } + if (reg & MUSB_CONFIGDATA_HBRXE) { + strcat(aInfo, ", HB-ISO Rx"); +- strcat(aInfo, " (X)"); /* no driver support */ ++ musb->hb_iso_rx = true; + } + if (reg & MUSB_CONFIGDATA_HBTXE) { + strcat(aInfo, ", HB-ISO Tx"); +- strcat(aInfo, " (X)"); /* no driver support */ ++ musb->hb_iso_tx = true; + } + if (reg & MUSB_CONFIGDATA_SOFTCONE) + strcat(aInfo, ", SoftConn"); +diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h +index f56a56c..0ac4faf 100644 +--- a/drivers/usb/musb/musb_core.h ++++ b/drivers/usb/musb/musb_core.h +@@ -387,6 +387,9 @@ struct musb { + unsigned is_multipoint:1; + unsigned ignore_disconnect:1; /* during bus resets */ + ++ unsigned hb_iso_rx:1; /* high bandwidth iso rx? */ ++ unsigned hb_iso_tx:1; /* high bandwidth iso tx? */ ++ + #ifdef C_MP_TX + unsigned bulk_split:1; + #define can_bulk_split(musb,type) \ +diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c +index 71e835e..ece5122 100644 +--- a/drivers/usb/musb/musb_host.c ++++ b/drivers/usb/musb/musb_host.c +@@ -602,7 +602,8 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) + musb_writeb(ep->regs, MUSB_RXTYPE, qh->type_reg); + musb_writeb(ep->regs, MUSB_RXINTERVAL, qh->intv_reg); + /* NOTE: bulk combining rewrites high bits of maxpacket */ +- musb_writew(ep->regs, MUSB_RXMAXP, qh->maxpacket); ++ musb_writew(ep->regs, MUSB_RXMAXP, ++ qh->maxpacket | ((qh->hb_mult - 1) << 11)); + + ep->rx_reinit = 0; + } +@@ -624,9 +625,10 @@ static bool musb_tx_dma_program(struct dma_controller *dma, + csr = musb_readw(epio, MUSB_TXCSR); + if (length > pkt_size) { + mode = 1; +- csr |= MUSB_TXCSR_AUTOSET +- | MUSB_TXCSR_DMAMODE +- | MUSB_TXCSR_DMAENAB; ++ csr |= MUSB_TXCSR_DMAMODE | MUSB_TXCSR_DMAENAB; ++ /* autoset shouldn't be set in high bandwidth */ ++ if (qh->hb_mult == 1) ++ csr |= MUSB_TXCSR_AUTOSET; + } else { + mode = 0; + csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE); +@@ -1432,6 +1434,10 @@ void musb_host_rx(struct musb *musb, u8 epnum) + /* packet error reported later */ + iso_err = true; + } ++ } else if (rx_csr & MUSB_RXCSR_INCOMPRX) { ++ DBG(3, "end %d high bandwidth incomplete ISO packet RX\n", ++ epnum); ++ status = -EPROTO; + } + + /* faults abort the transfer */ +@@ -1639,7 +1645,11 @@ void musb_host_rx(struct musb *musb, u8 epnum) + val &= ~MUSB_RXCSR_H_AUTOREQ; + else + val |= MUSB_RXCSR_H_AUTOREQ; +- val |= MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB; ++ val |= MUSB_RXCSR_DMAENAB; ++ ++ /* autoclear shouldn't be set in high bandwidth */ ++ if (qh->hb_mult == 1) ++ val |= MUSB_RXCSR_AUTOCLEAR; + + musb_writew(epio, MUSB_RXCSR, + MUSB_RXCSR_H_WZC_BITS | val); +@@ -1725,9 +1735,10 @@ static int musb_schedule( + continue; + + if (is_in) +- diff = hw_ep->max_packet_sz_rx - qh->maxpacket; ++ diff = hw_ep->max_packet_sz_rx; + else +- diff = hw_ep->max_packet_sz_tx - qh->maxpacket; ++ diff = hw_ep->max_packet_sz_tx; ++ diff -= (qh->maxpacket * qh->hb_mult); + + if (diff >= 0 && best_diff > diff) { + best_diff = diff; +@@ -1830,15 +1841,27 @@ static int musb_urb_enqueue( + qh->is_ready = 1; + + qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize); ++ qh->type = usb_endpoint_type(epd); + +- /* no high bandwidth support yet */ +- if (qh->maxpacket & ~0x7ff) { +- ret = -EMSGSIZE; +- goto done; ++ /* Bits 11 & 12 of wMaxPacketSize encode high bandwidth multiplier. ++ * Some musb cores don't support high bandwidth ISO transfers; and ++ * we don't (yet!) support high bandwidth interrupt transfers. ++ */ ++ qh->hb_mult = 1 + ((qh->maxpacket >> 11) & 0x03); ++ if (qh->hb_mult > 1) { ++ int ok = (qh->type == USB_ENDPOINT_XFER_ISOC); ++ ++ if (ok) ++ ok = (usb_pipein(urb->pipe) && musb->hb_iso_rx) ++ || (usb_pipeout(urb->pipe) && musb->hb_iso_tx); ++ if (!ok) { ++ ret = -EMSGSIZE; ++ goto done; ++ } ++ qh->maxpacket &= 0x7ff; + } + + qh->epnum = usb_endpoint_num(epd); +- qh->type = usb_endpoint_type(epd); + + /* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */ + qh->addr_reg = (u8) usb_pipedevice(urb->pipe); +diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h +index 0b7fbcd..14b0077 100644 +--- a/drivers/usb/musb/musb_host.h ++++ b/drivers/usb/musb/musb_host.h +@@ -67,6 +67,7 @@ struct musb_qh { + u8 is_ready; /* safe to modify hw_ep */ + u8 type; /* XFERTYPE_* */ + u8 epnum; ++ u8 hb_mult; /* high bandwidth pkts per uf */ + u16 maxpacket; + u16 frame; /* for periodic schedule */ + unsigned iso_idx; /* in urb->iso_frame_desc[] */ +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0024-USB-otg-adding-nop-usb-transceiver.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0024-USB-otg-adding-nop-usb-transceiver.patch new file mode 100644 index 000000000..67004d7ec --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0024-USB-otg-adding-nop-usb-transceiver.patch @@ -0,0 +1,259 @@ +From de835357b3597af5304742cbd89771d70533292a Mon Sep 17 00:00:00 2001 +From: Ajay Kumar Gupta +Date: Fri, 6 Feb 2009 17:32:35 +0530 +Subject: [PATCH] USB: otg: adding nop usb transceiver + +NOP transceiver is used by all the usb transceiver which are mostly +autonomous and doesn't require any programming or which are built +into the usb ip itself.NOP transceiver only allocates the memory +for struct xceiv and calls otg_set_transceiver() so function call +to otg_get_transceiver() will return a valid transceiver. + +NOP transceiver device should be registered by calling +usb_nop_xceiv_register() from platform files. + +Signed-off-by: Ajay Kumar Gupta +Cc: Felipe Balbi +Cc: David Brownell +Signed-off-by: Greg Kroah-Hartman +--- + drivers/usb/otg/Kconfig | 8 ++ + drivers/usb/otg/Makefile | 1 + + drivers/usb/otg/nop-usb-xceiv.c | 180 +++++++++++++++++++++++++++++++++++++++ + include/linux/usb/otg.h | 4 + + 4 files changed, 193 insertions(+), 0 deletions(-) + create mode 100644 drivers/usb/otg/nop-usb-xceiv.c + +diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig +index 5790a5b..aa884d0 100644 +--- a/drivers/usb/otg/Kconfig ++++ b/drivers/usb/otg/Kconfig +@@ -51,4 +51,12 @@ config TWL4030_USB + This transceiver supports high and full speed devices plus, + in host mode, low speed. + ++config NOP_USB_XCEIV ++ tristate "NOP USB Transceiver Driver" ++ select USB_OTG_UTILS ++ help ++ this driver is to be used by all the usb transceiver which are either ++ built-in with usb ip or which are autonomous and doesn't require any ++ phy programming such as ISP1x04 etc. ++ + endif # USB || OTG +diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile +index d73c7cf..2081678 100644 +--- a/drivers/usb/otg/Makefile ++++ b/drivers/usb/otg/Makefile +@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_OTG_UTILS) += otg.o + obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o + obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o + obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o ++obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o + + ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG + ccflags-$(CONFIG_USB_GADGET_DEBUG) += -DDEBUG +diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c +new file mode 100644 +index 0000000..4b933f6 +--- /dev/null ++++ b/drivers/usb/otg/nop-usb-xceiv.c +@@ -0,0 +1,180 @@ ++/* ++ * drivers/usb/otg/nop-usb-xceiv.c ++ * ++ * NOP USB transceiver for all USB transceiver which are either built-in ++ * into USB IP or which are mostly autonomous. ++ * ++ * Copyright (C) 2009 Texas Instruments Inc ++ * Author: Ajay Kumar Gupta ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ * Current status: ++ * this is to add "nop" transceiver for all those phy which is ++ * autonomous such as isp1504 etc. ++ */ ++ ++#include ++#include ++#include ++#include ++ ++struct nop_usb_xceiv { ++ struct otg_transceiver otg; ++ struct device *dev; ++}; ++ ++static u64 nop_xceiv_dmamask = DMA_32BIT_MASK; ++ ++static struct platform_device nop_xceiv_device = { ++ .name = "nop_usb_xceiv", ++ .id = -1, ++ .dev = { ++ .dma_mask = &nop_xceiv_dmamask, ++ .coherent_dma_mask = DMA_32BIT_MASK, ++ .platform_data = NULL, ++ }, ++}; ++ ++void usb_nop_xceiv_register(void) ++{ ++ if (platform_device_register(&nop_xceiv_device) < 0) { ++ printk(KERN_ERR "Unable to register usb nop transceiver\n"); ++ return; ++ } ++} ++ ++void usb_nop_xceiv_unregister(void) ++{ ++ platform_device_unregister(&nop_xceiv_device); ++} ++ ++static inline struct nop_usb_xceiv *xceiv_to_nop(struct otg_transceiver *x) ++{ ++ return container_of(x, struct nop_usb_xceiv, otg); ++} ++ ++static int nop_set_suspend(struct otg_transceiver *x, int suspend) ++{ ++ return 0; ++} ++ ++static int nop_set_peripheral(struct otg_transceiver *x, ++ struct usb_gadget *gadget) ++{ ++ struct nop_usb_xceiv *nop; ++ ++ if (!x) ++ return -ENODEV; ++ ++ nop = xceiv_to_nop(x); ++ ++ if (!gadget) { ++ nop->otg.gadget = NULL; ++ return -ENODEV; ++ } ++ ++ nop->otg.gadget = gadget; ++ nop->otg.state = OTG_STATE_B_IDLE; ++ return 0; ++} ++ ++static int nop_set_host(struct otg_transceiver *x, struct usb_bus *host) ++{ ++ struct nop_usb_xceiv *nop; ++ ++ if (!x) ++ return -ENODEV; ++ ++ nop = xceiv_to_nop(x); ++ ++ if (!host) { ++ nop->otg.host = NULL; ++ return -ENODEV; ++ } ++ ++ nop->otg.host = host; ++ return 0; ++} ++ ++static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev) ++{ ++ struct nop_usb_xceiv *nop; ++ int err; ++ ++ nop = kzalloc(sizeof *nop, GFP_KERNEL); ++ if (!nop) ++ return -ENOMEM; ++ ++ nop->dev = &pdev->dev; ++ nop->otg.dev = nop->dev; ++ nop->otg.label = "nop-xceiv"; ++ nop->otg.state = OTG_STATE_UNDEFINED; ++ nop->otg.set_host = nop_set_host; ++ nop->otg.set_peripheral = nop_set_peripheral; ++ nop->otg.set_suspend = nop_set_suspend; ++ ++ err = otg_set_transceiver(&nop->otg); ++ if (err) { ++ dev_err(&pdev->dev, "can't register transceiver, err: %d\n", ++ err); ++ goto exit; ++ } ++ ++ platform_set_drvdata(pdev, nop); ++ ++ return 0; ++exit: ++ kfree(nop); ++ return err; ++} ++ ++static int __devexit nop_usb_xceiv_remove(struct platform_device *pdev) ++{ ++ struct nop_usb_xceiv *nop = platform_get_drvdata(pdev); ++ ++ otg_set_transceiver(NULL); ++ ++ platform_set_drvdata(pdev, NULL); ++ kfree(nop); ++ ++ return 0; ++} ++ ++static struct platform_driver nop_usb_xceiv_driver = { ++ .probe = nop_usb_xceiv_probe, ++ .remove = __devexit_p(nop_usb_xceiv_remove), ++ .driver = { ++ .name = "nop_usb_xceiv", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init nop_usb_xceiv_init(void) ++{ ++ return platform_driver_register(&nop_usb_xceiv_driver); ++} ++subsys_initcall(nop_usb_xceiv_init); ++ ++static void __exit nop_usb_xceiv_exit(void) ++{ ++ platform_driver_unregister(&nop_usb_xceiv_driver); ++} ++module_exit(nop_usb_xceiv_exit); ++ ++MODULE_ALIAS("platform:nop_usb_xceiv"); ++MODULE_AUTHOR("Texas Instruments Inc"); ++MODULE_DESCRIPTION("NOP USB Transceiver driver"); ++MODULE_LICENSE("GPL"); +diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h +index 94df4fe..54f2424 100644 +--- a/include/linux/usb/otg.h ++++ b/include/linux/usb/otg.h +@@ -80,6 +80,10 @@ struct otg_transceiver { + + /* for board-specific init logic */ + extern int otg_set_transceiver(struct otg_transceiver *); ++#ifdef CONFIG_NOP_USB_XCEIV ++extern void usb_nop_xceiv_register(void); ++extern void usb_nop_xceiv_unregister(void); ++#endif + + + /* for usb host and peripheral controller drivers */ +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0025-nop-usb-xceiv-behave-when-linked-as-a-module.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0025-nop-usb-xceiv-behave-when-linked-as-a-module.patch new file mode 100644 index 000000000..21fe7bea1 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0025-nop-usb-xceiv-behave-when-linked-as-a-module.patch @@ -0,0 +1,90 @@ +From ae4f027580168814f734cf3c41a662a7f10c744c Mon Sep 17 00:00:00 2001 +From: David Brownell +Date: Tue, 31 Mar 2009 12:28:31 -0700 +Subject: [PATCH] nop-usb-xceiv: behave when linked as a module + +The NOP OTG transceiver driver needs to be usable from modules. +Make sure its symbols are always accessible at both compile and +link time, and make sure the device instance is allocated from +the heap so that device lifetime rules are obeyed. + +Signed-off-by: David Brownell +--- + drivers/usb/otg/nop-usb-xceiv.c | 25 ++++++++++--------------- + include/linux/usb/otg.h | 4 ++-- + 2 files changed, 12 insertions(+), 17 deletions(-) + +diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c +index 4b933f6..9ed5ea5 100644 +--- a/drivers/usb/otg/nop-usb-xceiv.c ++++ b/drivers/usb/otg/nop-usb-xceiv.c +@@ -22,8 +22,8 @@ + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Current status: +- * this is to add "nop" transceiver for all those phy which is +- * autonomous such as isp1504 etc. ++ * This provides a "nop" transceiver for PHYs which are ++ * autonomous such as isp1504, isp1707, etc. + */ + + #include +@@ -36,30 +36,25 @@ struct nop_usb_xceiv { + struct device *dev; + }; + +-static u64 nop_xceiv_dmamask = DMA_32BIT_MASK; +- +-static struct platform_device nop_xceiv_device = { +- .name = "nop_usb_xceiv", +- .id = -1, +- .dev = { +- .dma_mask = &nop_xceiv_dmamask, +- .coherent_dma_mask = DMA_32BIT_MASK, +- .platform_data = NULL, +- }, +-}; ++static struct platform_device *pd; + + void usb_nop_xceiv_register(void) + { +- if (platform_device_register(&nop_xceiv_device) < 0) { ++ if (pd) ++ return; ++ pd = platform_device_register_simple("nop_usb_xceiv", -1, NULL, 0); ++ if (!pd) { + printk(KERN_ERR "Unable to register usb nop transceiver\n"); + return; + } + } ++EXPORT_SYMBOL(usb_nop_xceiv_register); + + void usb_nop_xceiv_unregister(void) + { +- platform_device_unregister(&nop_xceiv_device); ++ platform_device_unregister(pd); + } ++EXPORT_SYMBOL(usb_nop_xceiv_unregister); + + static inline struct nop_usb_xceiv *xceiv_to_nop(struct otg_transceiver *x) + { +diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h +index 54f2424..7df8bae 100644 +--- a/include/linux/usb/otg.h ++++ b/include/linux/usb/otg.h +@@ -80,10 +80,10 @@ struct otg_transceiver { + + /* for board-specific init logic */ + extern int otg_set_transceiver(struct otg_transceiver *); +-#ifdef CONFIG_NOP_USB_XCEIV ++ ++/* sometimes transceivers are accessed only through e.g. ULPI */ + extern void usb_nop_xceiv_register(void); + extern void usb_nop_xceiv_unregister(void); +-#endif + + + /* for usb host and peripheral controller drivers */ +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0026-musb-proper-hookup-to-transceiver-drivers.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0026-musb-proper-hookup-to-transceiver-drivers.patch new file mode 100644 index 000000000..035a6c767 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0026-musb-proper-hookup-to-transceiver-drivers.patch @@ -0,0 +1,1109 @@ +From 43ee46723ffa9dd43d611362064d235440aa04e7 Mon Sep 17 00:00:00 2001 +From: David Brownell +Date: Tue, 31 Mar 2009 12:30:04 -0700 +Subject: [PATCH] musb: proper hookup to transceiver drivers + +Let the otg_transceiver in MUSB be managed by an external driver; +don't assume it's integrated. OMAP3 chips need it to be external, +and there may be ways to interact with the transceiver which add +functionality to the system. + +Platform init code is responsible for setting up the transeciver, +probably using the NOP transceiver for integrated transceivers. +External ones will use whatever the board init code provided, +such as twl4030 or something more hands-off. + +Signed-off-by: David Brownell +--- + drivers/usb/musb/Kconfig | 2 + + drivers/usb/musb/blackfin.c | 11 +++- + drivers/usb/musb/davinci.c | 33 +++++++++----- + drivers/usb/musb/musb_core.c | 96 +++++++++++++++++++++------------------ + drivers/usb/musb/musb_core.h | 2 +- + drivers/usb/musb/musb_gadget.c | 38 +++++++-------- + drivers/usb/musb/musb_host.c | 2 +- + drivers/usb/musb/musb_virthub.c | 20 ++++---- + drivers/usb/musb/omap2430.c | 62 +++++++++---------------- + drivers/usb/musb/tusb6010.c | 70 ++++++++++++++++++----------- + 10 files changed, 181 insertions(+), 155 deletions(-) + +diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig +index 9985db0..9eea991 100644 +--- a/drivers/usb/musb/Kconfig ++++ b/drivers/usb/musb/Kconfig +@@ -10,6 +10,7 @@ comment "Enable Host or Gadget support to see Inventra options" + config USB_MUSB_HDRC + depends on (USB || USB_GADGET) && HAVE_CLK + depends on !SUPERH ++ select NOP_USB_XCEIV if ARCH_DAVINCI + select TWL4030_USB if MACH_OMAP_3430SDP + select USB_OTG_UTILS + tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' +@@ -55,6 +56,7 @@ comment "Blackfin high speed USB Support" + config USB_TUSB6010 + boolean "TUSB 6010 support" + depends on USB_MUSB_HDRC && !USB_MUSB_SOC ++ select NOP_USB_XCEIV + default y + help + The TUSB 6010 chip, from Texas Instruments, connects a discrete +diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c +index 7861348..f2f66eb 100644 +--- a/drivers/usb/musb/blackfin.c ++++ b/drivers/usb/musb/blackfin.c +@@ -143,7 +143,7 @@ static void musb_conn_timer_handler(unsigned long _musb) + u16 val; + + spin_lock_irqsave(&musb->lock, flags); +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_A_IDLE: + case OTG_STATE_A_WAIT_BCON: + /* Start a new session */ +@@ -154,7 +154,7 @@ static void musb_conn_timer_handler(unsigned long _musb) + val = musb_readw(musb->mregs, MUSB_DEVCTL); + if (!(val & MUSB_DEVCTL_BDEVICE)) { + gpio_set_value(musb->config->gpio_vrsel, 1); +- musb->xceiv.state = OTG_STATE_A_WAIT_BCON; ++ musb->xceiv->state = OTG_STATE_A_WAIT_BCON; + } else { + gpio_set_value(musb->config->gpio_vrsel, 0); + +@@ -247,6 +247,11 @@ int __init musb_platform_init(struct musb *musb) + } + gpio_direction_output(musb->config->gpio_vrsel, 0); + ++ usb_nop_xceiv_register(); ++ musb->xceiv = otg_get_transceiver(); ++ if (!musb->xceiv) ++ return -ENODEV; ++ + if (ANOMALY_05000346) { + bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value); + SSYNC(); +@@ -291,7 +296,7 @@ int __init musb_platform_init(struct musb *musb) + musb_conn_timer_handler, (unsigned long) musb); + } + if (is_peripheral_enabled(musb)) +- musb->xceiv.set_power = bfin_set_power; ++ musb->xceiv->set_power = bfin_set_power; + + musb->isr = blackfin_interrupt; + +diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c +index 9fd74bf..81de742 100644 +--- a/drivers/usb/musb/davinci.c ++++ b/drivers/usb/musb/davinci.c +@@ -200,7 +200,7 @@ static void otg_timer(unsigned long _musb) + DBG(7, "poll devctl %02x (%s)\n", devctl, otg_state_string(musb)); + + spin_lock_irqsave(&musb->lock, flags); +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_A_WAIT_VFALL: + /* Wait till VBUS falls below SessionEnd (~0.2V); the 1.3 RTL + * seems to mis-handle session "start" otherwise (or in our +@@ -211,7 +211,7 @@ static void otg_timer(unsigned long _musb) + mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); + break; + } +- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE; ++ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + musb_writel(musb->ctrl_base, DAVINCI_USB_INT_SET_REG, + MUSB_INTR_VBUSERROR << DAVINCI_USB_USBINT_SHIFT); + break; +@@ -236,7 +236,7 @@ static void otg_timer(unsigned long _musb) + if (devctl & MUSB_DEVCTL_BDEVICE) + mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); + else +- musb->xceiv.state = OTG_STATE_A_IDLE; ++ musb->xceiv->state = OTG_STATE_A_IDLE; + break; + default: + break; +@@ -310,21 +310,21 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci) + * to stop registering in devctl. + */ + musb->int_usb &= ~MUSB_INTR_VBUSERROR; +- musb->xceiv.state = OTG_STATE_A_WAIT_VFALL; ++ musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; + mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); + WARNING("VBUS error workaround (delay coming)\n"); + } else if (is_host_enabled(musb) && drvvbus) { + musb->is_active = 1; + MUSB_HST_MODE(musb); +- musb->xceiv.default_a = 1; +- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE; ++ musb->xceiv->default_a = 1; ++ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + portstate(musb->port1_status |= USB_PORT_STAT_POWER); + del_timer(&otg_workaround); + } else { + musb->is_active = 0; + MUSB_DEV_MODE(musb); +- musb->xceiv.default_a = 0; +- musb->xceiv.state = OTG_STATE_B_IDLE; ++ musb->xceiv->default_a = 0; ++ musb->xceiv->state = OTG_STATE_B_IDLE; + portstate(musb->port1_status &= ~USB_PORT_STAT_POWER); + } + +@@ -346,7 +346,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci) + + /* poll for ID change */ + if (is_otg_enabled(musb) +- && musb->xceiv.state == OTG_STATE_B_IDLE) ++ && musb->xceiv->state == OTG_STATE_B_IDLE) + mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ); + + spin_unlock_irqrestore(&musb->lock, flags); +@@ -365,6 +365,11 @@ int __init musb_platform_init(struct musb *musb) + void __iomem *tibase = musb->ctrl_base; + u32 revision; + ++ usb_nop_xceiv_register(); ++ musb->xceiv = otg_get_transceiver(); ++ if (!musb->xceiv) ++ return -ENODEV; ++ + musb->mregs += DAVINCI_BASE_OFFSET; + + clk_enable(musb->clock); +@@ -372,7 +377,7 @@ int __init musb_platform_init(struct musb *musb) + /* returns zero if e.g. not clocked */ + revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG); + if (revision == 0) +- return -ENODEV; ++ goto fail; + + if (is_host_enabled(musb)) + setup_timer(&otg_workaround, otg_timer, (unsigned long) musb); +@@ -396,6 +401,10 @@ int __init musb_platform_init(struct musb *musb) + + musb->isr = davinci_interrupt; + return 0; ++ ++fail: ++ usb_nop_xceiv_unregister(); ++ return -ENODEV; + } + + int musb_platform_exit(struct musb *musb) +@@ -406,7 +415,7 @@ int musb_platform_exit(struct musb *musb) + davinci_source_power(musb, 0 /*off*/, 1); + + /* delay, to avoid problems with module reload */ +- if (is_host_enabled(musb) && musb->xceiv.default_a) { ++ if (is_host_enabled(musb) && musb->xceiv->default_a) { + int maxdelay = 30; + u8 devctl, warn = 0; + +@@ -435,5 +444,7 @@ int musb_platform_exit(struct musb *musb) + + clk_disable(musb->clock); + ++ usb_nop_xceiv_unregister(); ++ + return 0; + } +diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c +index d953305..ac150af 100644 +--- a/drivers/usb/musb/musb_core.c ++++ b/drivers/usb/musb/musb_core.c +@@ -267,7 +267,7 @@ void musb_load_testpacket(struct musb *musb) + + const char *otg_state_string(struct musb *musb) + { +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_A_IDLE: return "a_idle"; + case OTG_STATE_A_WAIT_VRISE: return "a_wait_vrise"; + case OTG_STATE_A_WAIT_BCON: return "a_wait_bcon"; +@@ -302,11 +302,11 @@ void musb_otg_timer_func(unsigned long data) + unsigned long flags; + + spin_lock_irqsave(&musb->lock, flags); +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_B_WAIT_ACON: + DBG(1, "HNP: b_wait_acon timeout; back to b_peripheral\n"); + musb_g_disconnect(musb); +- musb->xceiv.state = OTG_STATE_B_PERIPHERAL; ++ musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + musb->is_active = 0; + break; + case OTG_STATE_A_WAIT_BCON: +@@ -331,20 +331,20 @@ void musb_hnp_stop(struct musb *musb) + void __iomem *mbase = musb->mregs; + u8 reg; + +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_A_PERIPHERAL: + case OTG_STATE_A_WAIT_VFALL: + case OTG_STATE_A_WAIT_BCON: + DBG(1, "HNP: Switching back to A-host\n"); + musb_g_disconnect(musb); +- musb->xceiv.state = OTG_STATE_A_IDLE; ++ musb->xceiv->state = OTG_STATE_A_IDLE; + MUSB_HST_MODE(musb); + musb->is_active = 0; + break; + case OTG_STATE_B_HOST: + DBG(1, "HNP: Disabling HR\n"); + hcd->self.is_b_host = 0; +- musb->xceiv.state = OTG_STATE_B_PERIPHERAL; ++ musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + MUSB_DEV_MODE(musb); + reg = musb_readb(mbase, MUSB_POWER); + reg |= MUSB_POWER_SUSPENDM; +@@ -402,7 +402,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, + + if (devctl & MUSB_DEVCTL_HM) { + #ifdef CONFIG_USB_MUSB_HDRC_HCD +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_A_SUSPEND: + /* remote wakeup? later, GetPortStatus + * will stop RESUME signaling +@@ -425,12 +425,12 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, + musb->rh_timer = jiffies + + msecs_to_jiffies(20); + +- musb->xceiv.state = OTG_STATE_A_HOST; ++ musb->xceiv->state = OTG_STATE_A_HOST; + musb->is_active = 1; + usb_hcd_resume_root_hub(musb_to_hcd(musb)); + break; + case OTG_STATE_B_WAIT_ACON: +- musb->xceiv.state = OTG_STATE_B_PERIPHERAL; ++ musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + musb->is_active = 1; + MUSB_DEV_MODE(musb); + break; +@@ -441,11 +441,11 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, + } + #endif + } else { +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + #ifdef CONFIG_USB_MUSB_HDRC_HCD + case OTG_STATE_A_SUSPEND: + /* possibly DISCONNECT is upcoming */ +- musb->xceiv.state = OTG_STATE_A_HOST; ++ musb->xceiv->state = OTG_STATE_A_HOST; + usb_hcd_resume_root_hub(musb_to_hcd(musb)); + break; + #endif +@@ -490,7 +490,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, + */ + musb_writeb(mbase, MUSB_DEVCTL, MUSB_DEVCTL_SESSION); + musb->ep0_stage = MUSB_EP0_START; +- musb->xceiv.state = OTG_STATE_A_IDLE; ++ musb->xceiv->state = OTG_STATE_A_IDLE; + MUSB_HST_MODE(musb); + musb_set_vbus(musb, 1); + +@@ -516,7 +516,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, + * REVISIT: do delays from lots of DEBUG_KERNEL checks + * make trouble here, keeping VBUS < 4.4V ? + */ +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_A_HOST: + /* recovery is dicey once we've gotten past the + * initial stages of enumeration, but if VBUS +@@ -602,11 +602,11 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, + MUSB_HST_MODE(musb); + + /* indicate new connection to OTG machine */ +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_B_PERIPHERAL: + if (int_usb & MUSB_INTR_SUSPEND) { + DBG(1, "HNP: SUSPEND+CONNECT, now b_host\n"); +- musb->xceiv.state = OTG_STATE_B_HOST; ++ musb->xceiv->state = OTG_STATE_B_HOST; + hcd->self.is_b_host = 1; + int_usb &= ~MUSB_INTR_SUSPEND; + } else +@@ -614,13 +614,13 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, + break; + case OTG_STATE_B_WAIT_ACON: + DBG(1, "HNP: Waiting to switch to b_host state\n"); +- musb->xceiv.state = OTG_STATE_B_HOST; ++ musb->xceiv->state = OTG_STATE_B_HOST; + hcd->self.is_b_host = 1; + break; + default: + if ((devctl & MUSB_DEVCTL_VBUS) + == (3 << MUSB_DEVCTL_VBUS_SHIFT)) { +- musb->xceiv.state = OTG_STATE_A_HOST; ++ musb->xceiv->state = OTG_STATE_A_HOST; + hcd->self.is_b_host = 0; + } + break; +@@ -650,7 +650,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, + } + } else if (is_peripheral_capable()) { + DBG(1, "BUS RESET as %s\n", otg_state_string(musb)); +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + #ifdef CONFIG_USB_OTG + case OTG_STATE_A_SUSPEND: + /* We need to ignore disconnect on suspend +@@ -673,12 +673,12 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, + case OTG_STATE_B_WAIT_ACON: + DBG(1, "HNP: RESET (%s), to b_peripheral\n", + otg_state_string(musb)); +- musb->xceiv.state = OTG_STATE_B_PERIPHERAL; ++ musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + musb_g_reset(musb); + break; + #endif + case OTG_STATE_B_IDLE: +- musb->xceiv.state = OTG_STATE_B_PERIPHERAL; ++ musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + /* FALLTHROUGH */ + case OTG_STATE_B_PERIPHERAL: + musb_g_reset(musb); +@@ -763,7 +763,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, + MUSB_MODE(musb), devctl); + handled = IRQ_HANDLED; + +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + #ifdef CONFIG_USB_MUSB_HDRC_HCD + case OTG_STATE_A_HOST: + case OTG_STATE_A_SUSPEND: +@@ -805,7 +805,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, + otg_state_string(musb), devctl, power); + handled = IRQ_HANDLED; + +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + #ifdef CONFIG_USB_MUSB_OTG + case OTG_STATE_A_PERIPHERAL: + /* +@@ -817,10 +817,10 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, + case OTG_STATE_B_PERIPHERAL: + musb_g_suspend(musb); + musb->is_active = is_otg_enabled(musb) +- && musb->xceiv.gadget->b_hnp_enable; ++ && musb->xceiv->gadget->b_hnp_enable; + if (musb->is_active) { + #ifdef CONFIG_USB_MUSB_OTG +- musb->xceiv.state = OTG_STATE_B_WAIT_ACON; ++ musb->xceiv->state = OTG_STATE_B_WAIT_ACON; + DBG(1, "HNP: Setting timer for b_ase0_brst\n"); + musb_otg_timer.data = (unsigned long)musb; + mod_timer(&musb_otg_timer, jiffies +@@ -834,9 +834,9 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, + + msecs_to_jiffies(musb->a_wait_bcon)); + break; + case OTG_STATE_A_HOST: +- musb->xceiv.state = OTG_STATE_A_SUSPEND; ++ musb->xceiv->state = OTG_STATE_A_SUSPEND; + musb->is_active = is_otg_enabled(musb) +- && musb->xceiv.host->b_hnp_enable; ++ && musb->xceiv->host->b_hnp_enable; + break; + case OTG_STATE_B_HOST: + /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ +@@ -1681,7 +1681,7 @@ musb_vbus_store(struct device *dev, struct device_attribute *attr, + + spin_lock_irqsave(&musb->lock, flags); + musb->a_wait_bcon = val; +- if (musb->xceiv.state == OTG_STATE_A_WAIT_BCON) ++ if (musb->xceiv->state == OTG_STATE_A_WAIT_BCON) + musb->is_active = 0; + musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val)); + spin_unlock_irqrestore(&musb->lock, flags); +@@ -1742,8 +1742,8 @@ static void musb_irq_work(struct work_struct *data) + struct musb *musb = container_of(data, struct musb, irq_work); + static int old_state; + +- if (musb->xceiv.state != old_state) { +- old_state = musb->xceiv.state; ++ if (musb->xceiv->state != old_state) { ++ old_state = musb->xceiv->state; + sysfs_notify(&musb->controller->kobj, NULL, "mode"); + } + } +@@ -1840,7 +1840,7 @@ static void musb_free(struct musb *musb) + } + + #ifdef CONFIG_USB_MUSB_OTG +- put_device(musb->xceiv.dev); ++ put_device(musb->xceiv->dev); + #endif + + #ifdef CONFIG_USB_MUSB_HDRC_HCD +@@ -1921,10 +1921,18 @@ bad_config: + } + } + +- /* assume vbus is off */ +- +- /* platform adjusts musb->mregs and musb->isr if needed, +- * and activates clocks ++ /* The musb_platform_init() call: ++ * - adjusts musb->mregs and musb->isr if needed, ++ * - may initialize an integrated tranceiver ++ * - initializes musb->xceiv, usually by otg_get_transceiver() ++ * - activates clocks. ++ * - stops powering VBUS ++ * - assigns musb->board_set_vbus if host mode is enabled ++ * ++ * There are various transciever configurations. Blackfin, ++ * DaVinci, TUSB60x0, and others integrate them. OMAP3 uses ++ * external/discrete ones in various flavors (twl4030 family, ++ * isp1504, non-OTG, etc) mostly hooking up through ULPI. + */ + musb->isr = generic_interrupt; + status = musb_platform_init(musb); +@@ -1992,17 +2000,17 @@ bad_config: + ? "DMA" : "PIO", + musb->nIrq); + +-#ifdef CONFIG_USB_MUSB_HDRC_HCD +- /* host side needs more setup, except for no-host modes */ +- if (musb->board_mode != MUSB_PERIPHERAL) { ++ /* host side needs more setup */ ++ if (is_host_enabled(musb)) { + struct usb_hcd *hcd = musb_to_hcd(musb); + +- if (musb->board_mode == MUSB_OTG) ++ otg_set_host(musb->xceiv, &hcd->self); ++ ++ if (is_otg_enabled(musb)) + hcd->self.otg_port = 1; +- musb->xceiv.host = &hcd->self; ++ musb->xceiv->host = &hcd->self; + hcd->power_budget = 2 * (plat->power ? : 250); + } +-#endif /* CONFIG_USB_MUSB_HDRC_HCD */ + + /* For the host-only role, we can activate right away. + * (We expect the ID pin to be forcibly grounded!!) +@@ -2010,8 +2018,8 @@ bad_config: + */ + if (!is_otg_enabled(musb) && is_host_enabled(musb)) { + MUSB_HST_MODE(musb); +- musb->xceiv.default_a = 1; +- musb->xceiv.state = OTG_STATE_A_IDLE; ++ musb->xceiv->default_a = 1; ++ musb->xceiv->state = OTG_STATE_A_IDLE; + + status = usb_add_hcd(musb_to_hcd(musb), -1, 0); + if (status) +@@ -2026,8 +2034,8 @@ bad_config: + + } else /* peripheral is enabled */ { + MUSB_DEV_MODE(musb); +- musb->xceiv.default_a = 0; +- musb->xceiv.state = OTG_STATE_B_IDLE; ++ musb->xceiv->default_a = 0; ++ musb->xceiv->state = OTG_STATE_B_IDLE; + + status = musb_gadget_setup(musb); + if (status) +diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h +index 0ac4faf..c3ee348 100644 +--- a/drivers/usb/musb/musb_core.h ++++ b/drivers/usb/musb/musb_core.h +@@ -356,7 +356,7 @@ struct musb { + u16 int_rx; + u16 int_tx; + +- struct otg_transceiver xceiv; ++ struct otg_transceiver *xceiv; + + int nIrq; + unsigned irq_wake:1; +diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c +index e8f920c..2fbfba5 100644 +--- a/drivers/usb/musb/musb_gadget.c ++++ b/drivers/usb/musb/musb_gadget.c +@@ -1406,7 +1406,7 @@ static int musb_gadget_wakeup(struct usb_gadget *gadget) + + spin_lock_irqsave(&musb->lock, flags); + +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_B_PERIPHERAL: + /* NOTE: OTG state machine doesn't include B_SUSPENDED; + * that's part of the standard usb 1.1 state machine, and +@@ -1508,9 +1508,9 @@ static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA) + { + struct musb *musb = gadget_to_musb(gadget); + +- if (!musb->xceiv.set_power) ++ if (!musb->xceiv->set_power) + return -EOPNOTSUPP; +- return otg_set_power(&musb->xceiv, mA); ++ return otg_set_power(musb->xceiv, mA); + } + + static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on) +@@ -1733,11 +1733,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) + + spin_lock_irqsave(&musb->lock, flags); + +- /* REVISIT always use otg_set_peripheral(), handling +- * issues including the root hub one below ... +- */ +- musb->xceiv.gadget = &musb->g; +- musb->xceiv.state = OTG_STATE_B_IDLE; ++ otg_set_peripheral(musb->xceiv, &musb->g); + musb->is_active = 1; + + /* FIXME this ignores the softconnect flag. Drivers are +@@ -1749,6 +1745,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) + if (!is_otg_enabled(musb)) + musb_start(musb); + ++ otg_set_peripheral(musb->xceiv, &musb->g); ++ + spin_unlock_irqrestore(&musb->lock, flags); + + if (is_otg_enabled(musb)) { +@@ -1762,8 +1760,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) + if (retval < 0) { + DBG(1, "add_hcd failed, %d\n", retval); + spin_lock_irqsave(&musb->lock, flags); +- musb->xceiv.gadget = NULL; +- musb->xceiv.state = OTG_STATE_UNDEFINED; ++ otg_set_peripheral(musb->xceiv, NULL); + musb->gadget_driver = NULL; + musb->g.dev.driver = NULL; + spin_unlock_irqrestore(&musb->lock, flags); +@@ -1846,8 +1843,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) + + (void) musb_gadget_vbus_draw(&musb->g, 0); + +- musb->xceiv.state = OTG_STATE_UNDEFINED; ++ musb->xceiv->state = OTG_STATE_UNDEFINED; + stop_activity(musb, driver); ++ otg_set_peripheral(musb->xceiv, NULL); + + DBG(3, "unregistering driver %s\n", driver->function); + spin_unlock_irqrestore(&musb->lock, flags); +@@ -1883,7 +1881,7 @@ EXPORT_SYMBOL(usb_gadget_unregister_driver); + void musb_g_resume(struct musb *musb) + { + musb->is_suspended = 0; +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_B_IDLE: + break; + case OTG_STATE_B_WAIT_ACON: +@@ -1909,10 +1907,10 @@ void musb_g_suspend(struct musb *musb) + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + DBG(3, "devctl %02x\n", devctl); + +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_B_IDLE: + if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) +- musb->xceiv.state = OTG_STATE_B_PERIPHERAL; ++ musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + break; + case OTG_STATE_B_PERIPHERAL: + musb->is_suspended = 1; +@@ -1958,22 +1956,22 @@ void musb_g_disconnect(struct musb *musb) + spin_lock(&musb->lock); + } + +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + default: + #ifdef CONFIG_USB_MUSB_OTG + DBG(2, "Unhandled disconnect %s, setting a_idle\n", + otg_state_string(musb)); +- musb->xceiv.state = OTG_STATE_A_IDLE; ++ musb->xceiv->state = OTG_STATE_A_IDLE; + break; + case OTG_STATE_A_PERIPHERAL: +- musb->xceiv.state = OTG_STATE_A_WAIT_VFALL; ++ musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; + break; + case OTG_STATE_B_WAIT_ACON: + case OTG_STATE_B_HOST: + #endif + case OTG_STATE_B_PERIPHERAL: + case OTG_STATE_B_IDLE: +- musb->xceiv.state = OTG_STATE_B_IDLE; ++ musb->xceiv->state = OTG_STATE_B_IDLE; + break; + case OTG_STATE_B_SRP_INIT: + break; +@@ -2029,10 +2027,10 @@ __acquires(musb->lock) + * or else after HNP, as A-Device + */ + if (devctl & MUSB_DEVCTL_BDEVICE) { +- musb->xceiv.state = OTG_STATE_B_PERIPHERAL; ++ musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + musb->g.is_a_peripheral = 0; + } else if (is_otg_enabled(musb)) { +- musb->xceiv.state = OTG_STATE_A_PERIPHERAL; ++ musb->xceiv->state = OTG_STATE_A_PERIPHERAL; + musb->g.is_a_peripheral = 1; + } else + WARN_ON(1); +diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c +index ece5122..795dabe 100644 +--- a/drivers/usb/musb/musb_host.c ++++ b/drivers/usb/musb/musb_host.c +@@ -2169,7 +2169,7 @@ static int musb_bus_suspend(struct usb_hcd *hcd) + { + struct musb *musb = hcd_to_musb(hcd); + +- if (musb->xceiv.state == OTG_STATE_A_SUSPEND) ++ if (musb->xceiv->state == OTG_STATE_A_SUSPEND) + return 0; + + if (is_host_active(musb) && musb->is_active) { +diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c +index e0e9ce5..7e7900f 100644 +--- a/drivers/usb/musb/musb_virthub.c ++++ b/drivers/usb/musb/musb_virthub.c +@@ -78,18 +78,18 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend) + DBG(3, "Root port suspended, power %02x\n", power); + + musb->port1_status |= USB_PORT_STAT_SUSPEND; +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_A_HOST: +- musb->xceiv.state = OTG_STATE_A_SUSPEND; ++ musb->xceiv->state = OTG_STATE_A_SUSPEND; + musb->is_active = is_otg_enabled(musb) +- && musb->xceiv.host->b_hnp_enable; ++ && musb->xceiv->host->b_hnp_enable; + musb_platform_try_idle(musb, 0); + break; + #ifdef CONFIG_USB_MUSB_OTG + case OTG_STATE_B_HOST: +- musb->xceiv.state = OTG_STATE_B_WAIT_ACON; ++ musb->xceiv->state = OTG_STATE_B_WAIT_ACON; + musb->is_active = is_otg_enabled(musb) +- && musb->xceiv.host->b_hnp_enable; ++ && musb->xceiv->host->b_hnp_enable; + musb_platform_try_idle(musb, 0); + break; + #endif +@@ -116,7 +116,7 @@ static void musb_port_reset(struct musb *musb, bool do_reset) + void __iomem *mbase = musb->mregs; + + #ifdef CONFIG_USB_MUSB_OTG +- if (musb->xceiv.state == OTG_STATE_B_IDLE) { ++ if (musb->xceiv->state == OTG_STATE_B_IDLE) { + DBG(2, "HNP: Returning from HNP; no hub reset from b_idle\n"); + musb->port1_status &= ~USB_PORT_STAT_RESET; + return; +@@ -186,14 +186,14 @@ void musb_root_disconnect(struct musb *musb) + usb_hcd_poll_rh_status(musb_to_hcd(musb)); + musb->is_active = 0; + +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_A_HOST: + case OTG_STATE_A_SUSPEND: +- musb->xceiv.state = OTG_STATE_A_WAIT_BCON; ++ musb->xceiv->state = OTG_STATE_A_WAIT_BCON; + musb->is_active = 0; + break; + case OTG_STATE_A_WAIT_VFALL: +- musb->xceiv.state = OTG_STATE_B_IDLE; ++ musb->xceiv->state = OTG_STATE_B_IDLE; + break; + default: + DBG(1, "host disconnect (%s)\n", otg_state_string(musb)); +@@ -332,7 +332,7 @@ int musb_hub_control( + musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; + usb_hcd_poll_rh_status(musb_to_hcd(musb)); + /* NOTE: it might really be A_WAIT_BCON ... */ +- musb->xceiv.state = OTG_STATE_A_HOST; ++ musb->xceiv->state = OTG_STATE_A_HOST; + } + + put_unaligned(cpu_to_le32(musb->port1_status +diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c +index 901dffd..5f67b03 100644 +--- a/drivers/usb/musb/omap2430.c ++++ b/drivers/usb/musb/omap2430.c +@@ -62,17 +62,17 @@ static void musb_do_idle(unsigned long _musb) + + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_A_WAIT_BCON: + devctl &= ~MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + if (devctl & MUSB_DEVCTL_BDEVICE) { +- musb->xceiv.state = OTG_STATE_B_IDLE; ++ musb->xceiv->state = OTG_STATE_B_IDLE; + MUSB_DEV_MODE(musb); + } else { +- musb->xceiv.state = OTG_STATE_A_IDLE; ++ musb->xceiv->state = OTG_STATE_A_IDLE; + MUSB_HST_MODE(musb); + } + break; +@@ -90,7 +90,7 @@ static void musb_do_idle(unsigned long _musb) + musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; + usb_hcd_poll_rh_status(musb_to_hcd(musb)); + /* NOTE: it might really be A_WAIT_BCON ... */ +- musb->xceiv.state = OTG_STATE_A_HOST; ++ musb->xceiv->state = OTG_STATE_A_HOST; + } + break; + #endif +@@ -98,9 +98,9 @@ static void musb_do_idle(unsigned long _musb) + case OTG_STATE_A_HOST: + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + if (devctl & MUSB_DEVCTL_BDEVICE) +- musb->xceiv.state = OTG_STATE_B_IDLE; ++ musb->xceiv->state = OTG_STATE_B_IDLE; + else +- musb->xceiv.state = OTG_STATE_A_WAIT_BCON; ++ musb->xceiv->state = OTG_STATE_A_WAIT_BCON; + #endif + default: + break; +@@ -119,7 +119,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout) + + /* Never idle if active, or when VBUS timeout is not set as host */ + if (musb->is_active || ((musb->a_wait_bcon == 0) +- && (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) { ++ && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) { + DBG(4, "%s active, deleting timer\n", otg_state_string(musb)); + del_timer(&musb_idle_timer); + last_timer = jiffies; +@@ -164,8 +164,8 @@ static void omap_set_vbus(struct musb *musb, int is_on) + + if (is_on) { + musb->is_active = 1; +- musb->xceiv.default_a = 1; +- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE; ++ musb->xceiv->default_a = 1; ++ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + devctl |= MUSB_DEVCTL_SESSION; + + MUSB_HST_MODE(musb); +@@ -176,8 +176,8 @@ static void omap_set_vbus(struct musb *musb, int is_on) + * jumping right to B_IDLE... + */ + +- musb->xceiv.default_a = 0; +- musb->xceiv.state = OTG_STATE_B_IDLE; ++ musb->xceiv->default_a = 0; ++ musb->xceiv->state = OTG_STATE_B_IDLE; + devctl &= ~MUSB_DEVCTL_SESSION; + + MUSB_DEV_MODE(musb); +@@ -189,10 +189,6 @@ static void omap_set_vbus(struct musb *musb, int is_on) + otg_state_string(musb), + musb_readb(musb->mregs, MUSB_DEVCTL)); + } +-static int omap_set_power(struct otg_transceiver *x, unsigned mA) +-{ +- return 0; +-} + + static int musb_platform_resume(struct musb *musb); + +@@ -203,24 +199,6 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode) + devctl |= MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + +- switch (musb_mode) { +-#ifdef CONFIG_USB_MUSB_HDRC_HCD +- case MUSB_HOST: +- otg_set_host(&musb->xceiv, musb->xceiv.host); +- break; +-#endif +-#ifdef CONFIG_USB_GADGET_MUSB_HDRC +- case MUSB_PERIPHERAL: +- otg_set_peripheral(&musb->xceiv, musb->xceiv.gadget); +- break; +-#endif +-#ifdef CONFIG_USB_MUSB_OTG +- case MUSB_OTG: +- break; +-#endif +- default: +- return -EINVAL; +- } + return 0; + } + +@@ -232,6 +210,16 @@ int __init musb_platform_init(struct musb *musb) + omap_cfg_reg(AE5_2430_USB0HS_STP); + #endif + ++ /* We require some kind of external transceiver, hooked ++ * up through ULPI. TWL4030-family PMICs include one, ++ * which needs a driver, drivers aren't always needed. ++ */ ++ musb->xceiv = otg_get_transceiver(); ++ if (!musb->xceiv) { ++ pr_err("HS USB OTG: no transceiver configured\n"); ++ return -ENODEV; ++ } ++ + musb_platform_resume(musb); + + l = omap_readl(OTG_SYSCONFIG); +@@ -258,8 +246,6 @@ int __init musb_platform_init(struct musb *musb) + + if (is_host_enabled(musb)) + musb->board_set_vbus = omap_set_vbus; +- if (is_peripheral_enabled(musb)) +- musb->xceiv.set_power = omap_set_power; + musb->a_wait_bcon = MUSB_TIMEOUT_A_WAIT_BCON; + + setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb); +@@ -283,8 +269,7 @@ int musb_platform_suspend(struct musb *musb) + l |= ENABLEWAKEUP; /* enable wakeup */ + omap_writel(l, OTG_SYSCONFIG); + +- if (musb->xceiv.set_suspend) +- musb->xceiv.set_suspend(&musb->xceiv, 1); ++ otg_set_suspend(musb->xceiv, 1); + + if (musb->set_clock) + musb->set_clock(musb->clock, 0); +@@ -301,8 +286,7 @@ static int musb_platform_resume(struct musb *musb) + if (!musb->clock) + return 0; + +- if (musb->xceiv.set_suspend) +- musb->xceiv.set_suspend(&musb->xceiv, 0); ++ otg_set_suspend(musb->xceiv, 0); + + if (musb->set_clock) + musb->set_clock(musb->clock, 1); +diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c +index 9e20fd0..c473dec 100644 +--- a/drivers/usb/musb/tusb6010.c ++++ b/drivers/usb/musb/tusb6010.c +@@ -260,6 +260,8 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf) + tusb_fifo_read_unaligned(fifo, buf, len); + } + ++static struct musb *the_musb; ++ + #ifdef CONFIG_USB_GADGET_MUSB_HDRC + + /* This is used by gadget drivers, and OTG transceiver logic, allowing +@@ -270,7 +272,7 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf) + */ + static int tusb_draw_power(struct otg_transceiver *x, unsigned mA) + { +- struct musb *musb = container_of(x, struct musb, xceiv); ++ struct musb *musb = the_musb; + void __iomem *tbase = musb->ctrl_base; + u32 reg; + +@@ -420,7 +422,7 @@ static void musb_do_idle(unsigned long _musb) + + spin_lock_irqsave(&musb->lock, flags); + +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_A_WAIT_BCON: + if ((musb->a_wait_bcon != 0) + && (musb->idle_timeout == 0 +@@ -484,7 +486,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout) + + /* Never idle if active, or when VBUS timeout is not set as host */ + if (musb->is_active || ((musb->a_wait_bcon == 0) +- && (musb->xceiv.state == OTG_STATE_A_WAIT_BCON))) { ++ && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) { + DBG(4, "%s active, deleting timer\n", otg_state_string(musb)); + del_timer(&musb_idle_timer); + last_timer = jiffies; +@@ -533,8 +535,8 @@ static void tusb_source_power(struct musb *musb, int is_on) + if (musb->set_clock) + musb->set_clock(musb->clock, 1); + timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE); +- musb->xceiv.default_a = 1; +- musb->xceiv.state = OTG_STATE_A_WAIT_VRISE; ++ musb->xceiv->default_a = 1; ++ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE; + devctl |= MUSB_DEVCTL_SESSION; + + conf |= TUSB_DEV_CONF_USB_HOST_MODE; +@@ -547,24 +549,24 @@ static void tusb_source_power(struct musb *musb, int is_on) + /* If ID pin is grounded, we want to be a_idle */ + otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT); + if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) { +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_A_WAIT_VRISE: + case OTG_STATE_A_WAIT_BCON: +- musb->xceiv.state = OTG_STATE_A_WAIT_VFALL; ++ musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; + break; + case OTG_STATE_A_WAIT_VFALL: +- musb->xceiv.state = OTG_STATE_A_IDLE; ++ musb->xceiv->state = OTG_STATE_A_IDLE; + break; + default: +- musb->xceiv.state = OTG_STATE_A_IDLE; ++ musb->xceiv->state = OTG_STATE_A_IDLE; + } + musb->is_active = 0; +- musb->xceiv.default_a = 1; ++ musb->xceiv->default_a = 1; + MUSB_HST_MODE(musb); + } else { + musb->is_active = 0; +- musb->xceiv.default_a = 0; +- musb->xceiv.state = OTG_STATE_B_IDLE; ++ musb->xceiv->default_a = 0; ++ musb->xceiv->state = OTG_STATE_B_IDLE; + MUSB_DEV_MODE(musb); + } + +@@ -675,7 +677,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) + else + default_a = is_host_enabled(musb); + DBG(2, "Default-%c\n", default_a ? 'A' : 'B'); +- musb->xceiv.default_a = default_a; ++ musb->xceiv->default_a = default_a; + tusb_source_power(musb, default_a); + + /* Don't allow idling immediately */ +@@ -687,7 +689,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) + if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) { + + /* B-dev state machine: no vbus ~= disconnect */ +- if ((is_otg_enabled(musb) && !musb->xceiv.default_a) ++ if ((is_otg_enabled(musb) && !musb->xceiv->default_a) + || !is_host_enabled(musb)) { + #ifdef CONFIG_USB_MUSB_HDRC_HCD + /* ? musb_root_disconnect(musb); */ +@@ -702,9 +704,9 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) + + if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) { + DBG(1, "Forcing disconnect (no interrupt)\n"); +- if (musb->xceiv.state != OTG_STATE_B_IDLE) { ++ if (musb->xceiv->state != OTG_STATE_B_IDLE) { + /* INTR_DISCONNECT can hide... */ +- musb->xceiv.state = OTG_STATE_B_IDLE; ++ musb->xceiv->state = OTG_STATE_B_IDLE; + musb->int_usb |= MUSB_INTR_DISCONNECT; + } + musb->is_active = 0; +@@ -718,7 +720,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) + DBG(2, "vbus change, %s, otg %03x\n", + otg_state_string(musb), otg_stat); + +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_A_IDLE: + DBG(2, "Got SRP, turning on VBUS\n"); + musb_set_vbus(musb, 1); +@@ -766,7 +768,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) + + DBG(4, "%s timer, %03x\n", otg_state_string(musb), otg_stat); + +- switch (musb->xceiv.state) { ++ switch (musb->xceiv->state) { + case OTG_STATE_A_WAIT_VRISE: + /* VBUS has probably been valid for a while now, + * but may well have bounced out of range a bit +@@ -778,7 +780,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase) + DBG(2, "devctl %02x\n", devctl); + break; + } +- musb->xceiv.state = OTG_STATE_A_WAIT_BCON; ++ musb->xceiv->state = OTG_STATE_A_WAIT_BCON; + musb->is_active = 0; + idle_timeout = jiffies + + msecs_to_jiffies(musb->a_wait_bcon); +@@ -1094,9 +1096,14 @@ int __init musb_platform_init(struct musb *musb) + { + struct platform_device *pdev; + struct resource *mem; +- void __iomem *sync; ++ void __iomem *sync = NULL; + int ret; + ++ usb_nop_xceiv_register(); ++ musb->xceiv = otg_get_transceiver(); ++ if (!musb->xceiv) ++ return -ENODEV; ++ + pdev = to_platform_device(musb->controller); + + /* dma address for async dma */ +@@ -1107,14 +1114,16 @@ int __init musb_platform_init(struct musb *musb) + mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!mem) { + pr_debug("no sync dma resource?\n"); +- return -ENODEV; ++ ret = -ENODEV; ++ goto done; + } + musb->sync = mem->start; + + sync = ioremap(mem->start, mem->end - mem->start + 1); + if (!sync) { + pr_debug("ioremap for sync failed\n"); +- return -ENOMEM; ++ ret = -ENOMEM; ++ goto done; + } + musb->sync_va = sync; + +@@ -1127,28 +1136,37 @@ int __init musb_platform_init(struct musb *musb) + if (ret) { + printk(KERN_ERR "Could not start tusb6010 (%d)\n", + ret); +- return -ENODEV; ++ goto done; + } + musb->isr = tusb_interrupt; + + if (is_host_enabled(musb)) + musb->board_set_vbus = tusb_source_power; +- if (is_peripheral_enabled(musb)) +- musb->xceiv.set_power = tusb_draw_power; ++ if (is_peripheral_enabled(musb)) { ++ musb->xceiv->set_power = tusb_draw_power; ++ the_musb = musb; ++ } + + setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb); + ++done: ++ if (ret < 0) { ++ if (sync) ++ iounmap(sync); ++ usb_nop_xceiv_unregister(); ++ } + return ret; + } + + int musb_platform_exit(struct musb *musb) + { + del_timer_sync(&musb_idle_timer); ++ the_musb = NULL; + + if (musb->board_set_power) + musb->board_set_power(0); + + iounmap(musb->sync_va); +- ++ usb_nop_xceiv_unregister(); + return 0; + } +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0027-musb-otg-timer-cleanup.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0027-musb-otg-timer-cleanup.patch new file mode 100644 index 000000000..f41b766cf --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0027-musb-otg-timer-cleanup.patch @@ -0,0 +1,198 @@ +From b4b8c1e7604784b9877f07400ff2a718118ef05c Mon Sep 17 00:00:00 2001 +From: David Brownell +Date: Tue, 31 Mar 2009 12:32:12 -0700 +Subject: [PATCH] musb: otg timer cleanup + +Minor cleanup of OTG timer handling: + * unify decls for OTG time constants, in the core header + * set up and use that timer in a more normal way + * move to the driver struct, so it's usable outside core + +And tighten use and setup of T(a_wait_bcon) so that if it's used, +it's always valid. (If that timer expires, the A-device will +stop powering VBUS. For non-OTG systems, that will be a surprise.) +No behavioral changes, other than more consistency when applying +that core HNP timeout. + +Signed-off-by: David Brownell +--- + drivers/usb/musb/musb_core.c | 41 ++++++++++++++++++++++------------------- + drivers/usb/musb/musb_core.h | 14 +++++++++++--- + drivers/usb/musb/omap2430.c | 2 -- + 3 files changed, 33 insertions(+), 24 deletions(-) + +diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c +index ac150af..05c5dd3 100644 +--- a/drivers/usb/musb/musb_core.c ++++ b/drivers/usb/musb/musb_core.c +@@ -112,6 +112,7 @@ + #include "davinci.h" + #endif + ++#define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON) + + + unsigned musb_debug; +@@ -288,12 +289,6 @@ const char *otg_state_string(struct musb *musb) + #ifdef CONFIG_USB_MUSB_OTG + + /* +- * See also USB_OTG_1-3.pdf 6.6.5 Timers +- * REVISIT: Are the other timers done in the hardware? +- */ +-#define TB_ASE0_BRST 100 /* Min 3.125 ms */ +- +-/* + * Handles OTG hnp timeouts, such as b_ase0_brst + */ + void musb_otg_timer_func(unsigned long data) +@@ -320,10 +315,8 @@ void musb_otg_timer_func(unsigned long data) + spin_unlock_irqrestore(&musb->lock, flags); + } + +-static DEFINE_TIMER(musb_otg_timer, musb_otg_timer_func, 0, 0); +- + /* +- * Stops the B-device HNP state. Caller must take care of locking. ++ * Stops the HNP transition. Caller must take care of locking. + */ + void musb_hnp_stop(struct musb *musb) + { +@@ -661,11 +654,12 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, + musb_g_reset(musb); + /* FALLTHROUGH */ + case OTG_STATE_A_WAIT_BCON: /* OPT TD.4.7-900ms */ +- DBG(1, "HNP: Setting timer as %s\n", +- otg_state_string(musb)); +- musb_otg_timer.data = (unsigned long)musb; +- mod_timer(&musb_otg_timer, jiffies +- + msecs_to_jiffies(100)); ++ /* never use invalid T(a_wait_bcon) */ ++ DBG(1, "HNP: in %s, %d msec timeout\n", ++ otg_state_string(musb), ++ TA_WAIT_BCON(musb)); ++ mod_timer(&musb->otg_timer, jiffies ++ + msecs_to_jiffies(TA_WAIT_BCON(musb))); + break; + case OTG_STATE_A_PERIPHERAL: + musb_hnp_stop(musb); +@@ -822,9 +816,9 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, + #ifdef CONFIG_USB_MUSB_OTG + musb->xceiv->state = OTG_STATE_B_WAIT_ACON; + DBG(1, "HNP: Setting timer for b_ase0_brst\n"); +- musb_otg_timer.data = (unsigned long)musb; +- mod_timer(&musb_otg_timer, jiffies +- + msecs_to_jiffies(TB_ASE0_BRST)); ++ mod_timer(&musb->otg_timer, jiffies ++ + msecs_to_jiffies( ++ OTG_TIME_B_ASE0_BRST)); + #endif + } + break; +@@ -1680,7 +1674,8 @@ musb_vbus_store(struct device *dev, struct device_attribute *attr, + } + + spin_lock_irqsave(&musb->lock, flags); +- musb->a_wait_bcon = val; ++ /* force T(a_wait_bcon) to be zero/unlimited *OR* valid */ ++ musb->a_wait_bcon = val ? max_t(int, val, OTG_TIME_A_WAIT_BCON) : 0 ; + if (musb->xceiv->state == OTG_STATE_A_WAIT_BCON) + musb->is_active = 0; + musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(val)); +@@ -1699,10 +1694,13 @@ musb_vbus_show(struct device *dev, struct device_attribute *attr, char *buf) + + spin_lock_irqsave(&musb->lock, flags); + val = musb->a_wait_bcon; ++ /* FIXME get_vbus_status() is normally #defined as false... ++ * and is effectively TUSB-specific. ++ */ + vbus = musb_platform_get_vbus_status(musb); + spin_unlock_irqrestore(&musb->lock, flags); + +- return sprintf(buf, "Vbus %s, timeout %lu\n", ++ return sprintf(buf, "Vbus %s, timeout %lu msec\n", + vbus ? "on" : "off", val); + } + static DEVICE_ATTR(vbus, 0644, musb_vbus_show, musb_vbus_store); +@@ -1775,6 +1773,7 @@ allocate_instance(struct device *dev, + hcd->uses_new_polling = 1; + + musb->vbuserr_retry = VBUSERR_RETRY_COUNT; ++ musb->a_wait_bcon = OTG_TIME_A_WAIT_BCON; + #else + musb = kzalloc(sizeof *musb, GFP_KERNEL); + if (!musb) +@@ -1969,6 +1968,10 @@ bad_config: + if (status < 0) + goto fail2; + ++#ifdef CONFIG_USB_OTG ++ setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb); ++#endif ++ + /* Init IRQ workqueue before request_irq */ + INIT_WORK(&musb->irq_work, musb_irq_work); + +diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h +index c3ee348..cf3ccb0 100644 +--- a/drivers/usb/musb/musb_core.h ++++ b/drivers/usb/musb/musb_core.h +@@ -40,6 +40,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -180,10 +181,15 @@ enum musb_g_ep0_state { + MUSB_EP0_STAGE_ACKWAIT, /* after zlp, before statusin */ + } __attribute__ ((packed)); + +-/* OTG protocol constants */ ++/* ++ * OTG protocol constants. See USB OTG 1.3 spec, ++ * sections 5.5 "Device Timings" and 6.6.5 "Timers". ++ */ + #define OTG_TIME_A_WAIT_VRISE 100 /* msec (max) */ +-#define OTG_TIME_A_WAIT_BCON 0 /* 0=infinite; min 1000 msec */ +-#define OTG_TIME_A_IDLE_BDIS 200 /* msec (min) */ ++#define OTG_TIME_A_WAIT_BCON 1100 /* min 1 second */ ++#define OTG_TIME_A_AIDL_BDIS 200 /* min 200 msec */ ++#define OTG_TIME_B_ASE0_BRST 100 /* min 3.125 ms */ ++ + + /*************************** REGISTER ACCESS ********************************/ + +@@ -332,6 +338,8 @@ struct musb { + struct list_head control; /* of musb_qh */ + struct list_head in_bulk; /* of musb_qh */ + struct list_head out_bulk; /* of musb_qh */ ++ ++ struct timer_list otg_timer; + #endif + + /* called with IRQs blocked; ON/nonzero implies starting a session, +diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c +index 5f67b03..3fbc807 100644 +--- a/drivers/usb/musb/omap2430.c ++++ b/drivers/usb/musb/omap2430.c +@@ -45,7 +45,6 @@ + #define get_cpu_rev() 2 + #endif + +-#define MUSB_TIMEOUT_A_WAIT_BCON 1100 + + static struct timer_list musb_idle_timer; + +@@ -246,7 +245,6 @@ int __init musb_platform_init(struct musb *musb) + + if (is_host_enabled(musb)) + musb->board_set_vbus = omap_set_vbus; +- musb->a_wait_bcon = MUSB_TIMEOUT_A_WAIT_BCON; + + setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb); + +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0028-musb-make-initial-HNP-roleswitch-work-v2.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0028-musb-make-initial-HNP-roleswitch-work-v2.patch new file mode 100644 index 000000000..626901622 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0028-musb-make-initial-HNP-roleswitch-work-v2.patch @@ -0,0 +1,133 @@ +From a637c5056ef52fbb7c41eb7537a9ec3d150231ad Mon Sep 17 00:00:00 2001 +From: David Brownell +Date: Thu, 2 Apr 2009 10:16:11 -0700 +Subject: [PATCH] musb: make initial HNP roleswitch work (v2) + +Minor HNP bugfixes, so the initial role switch works: + + - A-Device: + * disconnect-during-suspend enters A_PERIPHERAL state + * kill OTG timer after reset as A_PERIPHERAL ... + * ... and also pass that reset to the gadget + * once HNP succeeds, clear the "ignore_disconnect" flag + * from A_PERIPHERAL, disconnect transitions to A_WAIT_BCON + + - B-Device: + * kill OTG timer on entry to B_HOST state (HNP succeeded) + * once HNP succeeds, clear "ignore_disconnect" flag + * kick the root hub only _after_ the state is adjusted + +Other state transitions are left alone. Notably, exit paths from +the "roles have switched" state ... A_PERIPHERAL handling of that +stays seriously broken. + +Signed-off-by: David Brownell +--- + drivers/usb/musb/musb_core.c | 27 ++++++++++++++++----------- + drivers/usb/musb/musb_gadget.c | 2 +- + drivers/usb/musb/musb_virthub.c | 11 ++++++++++- + 3 files changed, 27 insertions(+), 13 deletions(-) + +diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c +index 05c5dd3..9dc995a 100644 +--- a/drivers/usb/musb/musb_core.c ++++ b/drivers/usb/musb/musb_core.c +@@ -587,28 +587,23 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, + if (devctl & MUSB_DEVCTL_LSDEV) + musb->port1_status |= USB_PORT_STAT_LOW_SPEED; + +- if (hcd->status_urb) +- usb_hcd_poll_rh_status(hcd); +- else +- usb_hcd_resume_root_hub(hcd); +- +- MUSB_HST_MODE(musb); +- + /* indicate new connection to OTG machine */ + switch (musb->xceiv->state) { + case OTG_STATE_B_PERIPHERAL: + if (int_usb & MUSB_INTR_SUSPEND) { + DBG(1, "HNP: SUSPEND+CONNECT, now b_host\n"); +- musb->xceiv->state = OTG_STATE_B_HOST; +- hcd->self.is_b_host = 1; + int_usb &= ~MUSB_INTR_SUSPEND; ++ goto b_host; + } else + DBG(1, "CONNECT as b_peripheral???\n"); + break; + case OTG_STATE_B_WAIT_ACON: +- DBG(1, "HNP: Waiting to switch to b_host state\n"); ++ DBG(1, "HNP: CONNECT, now b_host\n"); ++b_host: + musb->xceiv->state = OTG_STATE_B_HOST; + hcd->self.is_b_host = 1; ++ musb->ignore_disconnect = 0; ++ del_timer(&musb->otg_timer); + break; + default: + if ((devctl & MUSB_DEVCTL_VBUS) +@@ -618,6 +613,14 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, + } + break; + } ++ ++ /* poke the root hub */ ++ MUSB_HST_MODE(musb); ++ if (hcd->status_urb) ++ usb_hcd_poll_rh_status(hcd); ++ else ++ usb_hcd_resume_root_hub(hcd); ++ + DBG(1, "CONNECT (%s) devctl %02x\n", + otg_state_string(musb), devctl); + } +@@ -662,7 +665,9 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, + + msecs_to_jiffies(TA_WAIT_BCON(musb))); + break; + case OTG_STATE_A_PERIPHERAL: +- musb_hnp_stop(musb); ++ musb->ignore_disconnect = 0; ++ del_timer(&musb->otg_timer); ++ musb_g_reset(musb); + break; + case OTG_STATE_B_WAIT_ACON: + DBG(1, "HNP: RESET (%s), to b_peripheral\n", +diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c +index 2fbfba5..7dd3d59 100644 +--- a/drivers/usb/musb/musb_gadget.c ++++ b/drivers/usb/musb/musb_gadget.c +@@ -1964,7 +1964,7 @@ void musb_g_disconnect(struct musb *musb) + musb->xceiv->state = OTG_STATE_A_IDLE; + break; + case OTG_STATE_A_PERIPHERAL: +- musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; ++ musb->xceiv->state = OTG_STATE_A_WAIT_BCON; + break; + case OTG_STATE_B_WAIT_ACON: + case OTG_STATE_B_HOST: +diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c +index 7e7900f..14f7cf3 100644 +--- a/drivers/usb/musb/musb_virthub.c ++++ b/drivers/usb/musb/musb_virthub.c +@@ -187,8 +187,17 @@ void musb_root_disconnect(struct musb *musb) + musb->is_active = 0; + + switch (musb->xceiv->state) { +- case OTG_STATE_A_HOST: + case OTG_STATE_A_SUSPEND: ++#ifdef CONFIG_USB_MUSB_OTG ++ if (is_otg_enabled(musb) ++ && musb->xceiv->host->b_hnp_enable) { ++ musb->xceiv->state = OTG_STATE_A_PERIPHERAL; ++ musb->g.is_a_peripheral = 1; ++ break; ++ } ++#endif ++ /* FALLTHROUGH */ ++ case OTG_STATE_A_HOST: + musb->xceiv->state = OTG_STATE_A_WAIT_BCON; + musb->is_active = 0; + break; +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/musb/0029-musb-support-disconnect-after-HNP-roleswitch.patch b/meta/packages/linux/linux-omap-2.6.29/musb/0029-musb-support-disconnect-after-HNP-roleswitch.patch new file mode 100644 index 000000000..fc34fb983 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/musb/0029-musb-support-disconnect-after-HNP-roleswitch.patch @@ -0,0 +1,145 @@ +From 4288b7df4ae6629a4fb14aca2c489da01d4d19c3 Mon Sep 17 00:00:00 2001 +From: David Brownell +Date: Tue, 31 Mar 2009 12:35:09 -0700 +Subject: [PATCH] musb: support disconnect after HNP roleswitch + +Adjust HNP state machines in MUSB driver so that they handle the +case where the cable is disconnected. The A-side machine was +very wrong (unrecoverable); the B-Side was much less so. + + - A_PERIPHERAL ... as usual, the non-observability of the ID + pin through Mentor's registers makes trouble. We can't go + directly to A_WAIT_VFALL to end the session and start the + disconnect processing. We can however sense link suspending, + go to A_WAIT_BCON, and from there use OTG timeouts to finally + trigger that A_WAIT_VFALL transition. (Hoping that nobody + reconnects quickly to that port and notices the wrong state.) + + - B_HOST ... actually clear the Host Request (HR) bit as the + messages say, disconnect the peripheral from the root hub, + and don't detour through a suspend state. (In some cases + this would eventually have cleaned up.) + +Also adjust the A_SUSPEND transition to respect the A_AIDL_BDIS +timeout, so if HNP doesn't trigger quickly enough the A_WAIT_VFALL +transition happens as it should. + +Signed-off-by: David Brownell +--- + drivers/usb/musb/musb_core.c | 41 +++++++++++++++++++++++++++----------- + drivers/usb/musb/musb_gadget.c | 2 + + drivers/usb/musb/musb_virthub.c | 4 +++ + 3 files changed, 35 insertions(+), 12 deletions(-) + +diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c +index 9dc995a..5770ccb 100644 +--- a/drivers/usb/musb/musb_core.c ++++ b/drivers/usb/musb/musb_core.c +@@ -304,9 +304,11 @@ void musb_otg_timer_func(unsigned long data) + musb->xceiv->state = OTG_STATE_B_PERIPHERAL; + musb->is_active = 0; + break; ++ case OTG_STATE_A_SUSPEND: + case OTG_STATE_A_WAIT_BCON: +- DBG(1, "HNP: a_wait_bcon timeout; back to a_host\n"); +- musb_hnp_stop(musb); ++ DBG(1, "HNP: %s timeout\n", otg_state_string(musb)); ++ musb_set_vbus(musb, 0); ++ musb->xceiv->state = OTG_STATE_A_WAIT_VFALL; + break; + default: + DBG(1, "HNP: Unhandled mode %s\n", otg_state_string(musb)); +@@ -324,15 +326,12 @@ void musb_hnp_stop(struct musb *musb) + void __iomem *mbase = musb->mregs; + u8 reg; + ++ DBG(1, "HNP: stop from %s\n", otg_state_string(musb)); ++ + switch (musb->xceiv->state) { + case OTG_STATE_A_PERIPHERAL: +- case OTG_STATE_A_WAIT_VFALL: +- case OTG_STATE_A_WAIT_BCON: +- DBG(1, "HNP: Switching back to A-host\n"); + musb_g_disconnect(musb); +- musb->xceiv->state = OTG_STATE_A_IDLE; +- MUSB_HST_MODE(musb); +- musb->is_active = 0; ++ DBG(1, "HNP: back to %s\n", otg_state_string(musb)); + break; + case OTG_STATE_B_HOST: + DBG(1, "HNP: Disabling HR\n"); +@@ -775,7 +774,16 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, + #endif /* HOST */ + #ifdef CONFIG_USB_MUSB_OTG + case OTG_STATE_B_HOST: +- musb_hnp_stop(musb); ++ /* REVISIT this behaves for "real disconnect" ++ * cases; make sure the other transitions from ++ * from B_HOST act right too. The B_HOST code ++ * in hnp_stop() is currently not used... ++ */ ++ musb_root_disconnect(musb); ++ musb_to_hcd(musb)->self.is_b_host = 0; ++ musb->xceiv->state = OTG_STATE_B_PERIPHERAL; ++ MUSB_DEV_MODE(musb); ++ musb_g_disconnect(musb); + break; + case OTG_STATE_A_PERIPHERAL: + musb_hnp_stop(musb); +@@ -807,10 +815,19 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, + switch (musb->xceiv->state) { + #ifdef CONFIG_USB_MUSB_OTG + case OTG_STATE_A_PERIPHERAL: +- /* +- * We cannot stop HNP here, devctl BDEVICE might be +- * still set. ++ /* We also come here if the cable is removed, since ++ * this silicon doesn't report ID-no-longer-grounded. ++ * ++ * We depend on T(a_wait_bcon) to shut us down, and ++ * hope users don't do anything dicey during this ++ * undesired detour through A_WAIT_BCON. + */ ++ musb_hnp_stop(musb); ++ usb_hcd_resume_root_hub(musb_to_hcd(musb)); ++ musb_root_disconnect(musb); ++ musb_platform_try_idle(musb, jiffies ++ + msecs_to_jiffies(musb->a_wait_bcon ++ ? : OTG_TIME_A_WAIT_BCON)); + break; + #endif + case OTG_STATE_B_PERIPHERAL: +diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c +index 7dd3d59..8b3c4e2 100644 +--- a/drivers/usb/musb/musb_gadget.c ++++ b/drivers/usb/musb/musb_gadget.c +@@ -1962,9 +1962,11 @@ void musb_g_disconnect(struct musb *musb) + DBG(2, "Unhandled disconnect %s, setting a_idle\n", + otg_state_string(musb)); + musb->xceiv->state = OTG_STATE_A_IDLE; ++ MUSB_HST_MODE(musb); + break; + case OTG_STATE_A_PERIPHERAL: + musb->xceiv->state = OTG_STATE_A_WAIT_BCON; ++ MUSB_HST_MODE(musb); + break; + case OTG_STATE_B_WAIT_ACON: + case OTG_STATE_B_HOST: +diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c +index 14f7cf3..e8ef925 100644 +--- a/drivers/usb/musb/musb_virthub.c ++++ b/drivers/usb/musb/musb_virthub.c +@@ -83,6 +83,10 @@ static void musb_port_suspend(struct musb *musb, bool do_suspend) + musb->xceiv->state = OTG_STATE_A_SUSPEND; + musb->is_active = is_otg_enabled(musb) + && musb->xceiv->host->b_hnp_enable; ++ if (musb->is_active) ++ mod_timer(&musb->otg_timer, jiffies ++ + msecs_to_jiffies( ++ OTG_TIME_A_AIDL_BDIS)); + musb_platform_try_idle(musb, 0); + break; + #ifdef CONFIG_USB_MUSB_OTG +-- +1.6.0.4 + diff --git a/meta/packages/linux/linux-omap-2.6.29/no-cortex-deadlock.patch b/meta/packages/linux/linux-omap-2.6.29/no-cortex-deadlock.patch new file mode 100644 index 000000000..78547c896 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/no-cortex-deadlock.patch @@ -0,0 +1,77 @@ +From: Mans Rullgard +Date: Sat, 16 Aug 2008 23:03:06 +0000 (+0100) +Subject: ARM: Workaround for erratum 451034 +X-Git-Url: http://git.mansr.com/?p=linux-omap;a=commitdiff_plain;h=b84fa87873ffb68ad23930cf6cddeea8bec43ede + +ARM: Workaround for erratum 451034 + +On Cortex-A8 r1p0 and r1p1, executing a NEON store with an integer +store in the store buffer, can cause a processor deadlock under +certain conditions. + +Executing a DMB instruction before saving NEON/VFP registers and before +return to userspace makes it safe to run code which includes similar +counter-measures. Userspace code can still trigger the deadlock, so +a different workaround is required to safely run untrusted code. + +See ARM Cortex-A8 Errata Notice (PR120-PRDC-008070) for full details. + +Signed-off-by: Mans Rullgard +--- + +diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig +index aa475d9..41d536e 100644 +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -1117,6 +1117,22 @@ config NEON + Say Y to include support code for NEON, the ARMv7 Advanced SIMD + Extension. + ++config ARM_ERRATUM_451034 ++ bool "Enable workaround for ARM erratum 451034" ++ depends on VFPv3 ++ help ++ On Cortex-A8 r1p0 and r1p1, executing a NEON store with an integer ++ store in the store buffer, can cause a processor deadlock under ++ certain conditions. ++ ++ See ARM Cortex-A8 Errata Notice (PR120-PRDC-008070) for full details. ++ ++ Say Y to include a partial workaround. ++ ++ WARNING: Even with this option enabled, userspace code can trigger ++ the deadlock. To safely run untrusted code, a different fix is ++ required. ++ + endmenu + + menu "Userspace binary formats" +diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h +index 422f3cc..934798b 100644 +--- a/arch/arm/include/asm/vfpmacros.h ++++ b/arch/arm/include/asm/vfpmacros.h +@@ -32,6 +32,9 @@ + + @ write all the working registers out of the VFP + .macro VFPFSTMIA, base, tmp ++#ifdef CONFIG_ARM_ERRATUM_451034 ++ dmb ++#endif + #if __LINUX_ARM_ARCH__ < 6 + STC p11, cr0, [\base],#33*4 @ FSTMIAX \base!, {d0-d15} + #else +diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S +index 060d7e2..9799a35 100644 +--- a/arch/arm/kernel/entry-common.S ++++ b/arch/arm/kernel/entry-common.S +@@ -69,6 +69,10 @@ no_work_pending: + /* perform architecture specific actions before user return */ + arch_ret_to_user r1, lr + ++#ifdef CONFIG_ARM_ERRATUM_451034 ++ dmb ++#endif ++ + @ slow_restore_user_regs + ldr r1, [sp, #S_PSR] @ get calling cpsr + ldr lr, [sp, #S_PC]! @ get pc diff --git a/meta/packages/linux/linux-omap-2.6.29/no-empty-flash-warnings.patch b/meta/packages/linux/linux-omap-2.6.29/no-empty-flash-warnings.patch new file mode 100644 index 000000000..ab344b044 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/no-empty-flash-warnings.patch @@ -0,0 +1,15 @@ +diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c +index 1d437de..33b3feb 100644 +--- a/fs/jffs2/scan.c ++++ b/fs/jffs2/scan.c +@@ -647,8 +647,8 @@ scan_more: + inbuf_ofs = ofs - buf_ofs; + while (inbuf_ofs < scan_end) { + if (unlikely(*(uint32_t *)(&buf[inbuf_ofs]) != 0xffffffff)) { +- printk(KERN_WARNING "Empty flash at 0x%08x ends at 0x%08x\n", +- empty_start, ofs); ++// printk(KERN_WARNING "Empty flash at 0x%08x ends at 0x%08x\n", ++// empty_start, ofs); + if ((err = jffs2_scan_dirty_space(c, jeb, ofs-empty_start))) + return err; + goto scan_more; diff --git a/meta/packages/linux/linux-omap-2.6.29/no-harry-potter.diff b/meta/packages/linux/linux-omap-2.6.29/no-harry-potter.diff new file mode 100644 index 000000000..2bb20ab9c --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/no-harry-potter.diff @@ -0,0 +1,11 @@ +--- /tmp/Makefile 2008-04-24 14:36:20.509598016 +0200 ++++ git/arch/arm/Makefile 2008-04-24 14:36:31.949546584 +0200 +@@ -47,7 +47,7 @@ + # Note that GCC does not numerically define an architecture version + # macro, but instead defines a whole series of macros which makes + # testing for a specific architecture or later rather impossible. +-arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7a,-march=armv5t -Wa$(comma)-march=armv7a) ++arch-$(CONFIG_CPU_32v7) :=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a) + arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6) + # Only override the compiler option if ARMv6. The ARMv6K extensions are + # always available in ARMv7 diff --git a/meta/packages/linux/linux-omap-2.6.29/omap-2430-lcd.patch b/meta/packages/linux/linux-omap-2.6.29/omap-2430-lcd.patch new file mode 100644 index 000000000..8f8a687c0 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/omap-2430-lcd.patch @@ -0,0 +1,11 @@ +--- git/drivers/video/omap/lcd_2430sdp.c.orig 2007-08-13 14:35:17.000000000 -0700 ++++ git/drivers/video/omap/lcd_2430sdp.c 2007-08-13 14:35:55.000000000 -0700 +@@ -32,7 +32,7 @@ + #define LCD_PANEL_BACKLIGHT_GPIO 91 + #define LCD_PANEL_ENABLE_GPIO 154 + #define LCD_PIXCLOCK_MAX 5400 /* freq 5.4 MHz */ +-#define PM_RECEIVER TWL4030_MODULE_PM_RECIEVER ++#define PM_RECEIVER TWL4030_MODULE_PM_RECEIVER + #define ENABLE_VAUX2_DEDICATED 0x09 + #define ENABLE_VAUX2_DEV_GRP 0x20 + diff --git a/meta/packages/linux/linux-omap-2.6.29/omap1710h3/defconfig b/meta/packages/linux/linux-omap-2.6.29/omap1710h3/defconfig new file mode 100644 index 000000000..21f7c54e4 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/omap1710h3/defconfig @@ -0,0 +1,1224 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc2-omap1 +# Tue Aug 21 23:10:57 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_STI is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +# CONFIG_OMAP_DM_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +# CONFIG_ARCH_OMAP15XX is not set +CONFIG_ARCH_OMAP16XX=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_OMAP_H2 is not set +CONFIG_MACH_OMAP_H3=y +# CONFIG_MACH_OMAP_OSK is not set +# CONFIG_MACH_NOKIA770 is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +# CONFIG_OMAP_ARM_216MHZ is not set +# CONFIG_OMAP_ARM_192MHZ is not set +CONFIG_OMAP_ARM_168MHZ=y +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x10C08000 +CONFIG_ZBOOT_ROM_BSS=0x10200000 +# CONFIG_ZBOOT_ROM is not set +CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 initrd=0x10A00000,8M root=/dev/ram0 rw ip=dhcp devfs=mount" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=y + +# +# IrDA protocols +# +# CONFIG_IRLAN is not set +# CONFIG_IRNET is not set +# CONFIG_IRCOMM is not set +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_MCS_FIR is not set +# CONFIG_OMAP_IR is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +CONFIG_SLIP=y +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=y +# CONFIG_SLIP_SMART is not set +# CONFIG_SLIP_MODE_SLIP6 is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_OMAP_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +CONFIG_ISP1301_OMAP=m +CONFIG_TPS65010=y +# CONFIG_SENSORS_TLV320AIC23 is not set +CONFIG_GPIOEXPANDER_OMAP=y +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_OMAP_UWIRE=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TSC2101 is not set +# CONFIG_SPI_TSC2102 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_TSC210X is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_TUNER_TEA5761 is not set +# CONFIG_VIDEO_OMAP_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_W9968CF is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_ZR364XX is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_RADIO_TEA5761 is not set +# CONFIG_USB_DSBR is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +# CONFIG_SND is not set + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=y +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# Enable Host or Gadget support to see Inventra options +# +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_OMAP=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-omap-2.6.29/omap2420h4/defconfig b/meta/packages/linux/linux-omap-2.6.29/omap2420h4/defconfig new file mode 100644 index 000000000..c1133eef9 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/omap2420h4/defconfig @@ -0,0 +1,1119 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc2-omap1 +# Tue Aug 21 22:58:34 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +CONFIG_ARCH_OMAP2=y +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +CONFIG_OMAP_DEBUG_DEVICES=y +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +# CONFIG_OMAP_BOOT_REASON is not set +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_STI is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP Core Type +# +CONFIG_ARCH_OMAP24XX=y +CONFIG_ARCH_OMAP2420=y +# CONFIG_ARCH_OMAP2430 is not set + +# +# OMAP Board Type +# +# CONFIG_MACH_NOKIA_N800 is not set +CONFIG_MACH_OMAP_H4=y +# CONFIG_MACH_OMAP_H4_TUSB is not set +# CONFIG_MACH_OMAP_H4_OTG is not set +# CONFIG_MACH_OMAP2_H4_USB1 is not set +# CONFIG_MACH_OMAP_APOLLON is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set +# CONFIG_MACH_OMAP_2430SDP is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=y + +# +# IrDA protocols +# +CONFIG_IRLAN=y +CONFIG_IRCOMM=y +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +CONFIG_OMAP_IR=y +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_TLV320AIC23 is not set +CONFIG_GPIOEXPANDER_OMAP=y +# CONFIG_TWL4030_CORE is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +CONFIG_MENELAUS=y +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-omap-2.6.29/omap2430sdp/defconfig b/meta/packages/linux/linux-omap-2.6.29/omap2430sdp/defconfig new file mode 100644 index 000000000..f3897e48a --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/omap2430sdp/defconfig @@ -0,0 +1,1303 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc2-omap1 +# Sun Aug 12 17:38:46 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +# CONFIG_ARCH_OMAP1 is not set +CONFIG_ARCH_OMAP2=y +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +# CONFIG_OMAP_BOOT_REASON is not set +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +# CONFIG_OMAP_MUX_WARNINGS is not set +# CONFIG_OMAP_STI is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +CONFIG_OMAP_MPU_TIMER=y +# CONFIG_OMAP_32K_TIMER is not set +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP Core Type +# +CONFIG_ARCH_OMAP24XX=y +# CONFIG_ARCH_OMAP2420 is not set +CONFIG_ARCH_OMAP2430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_NOKIA_N800 is not set +# CONFIG_MACH_OMAP_H4 is not set +# CONFIG_MACH_OMAP_APOLLON is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set +CONFIG_MACH_OMAP_2430SDP=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +# CONFIG_MTD_ONENAND_GENERIC is not set +CONFIG_MTD_ONENAND_OMAP2=y +# CONFIG_MTD_ONENAND_OTP is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_OMAP is not set +CONFIG_KEYBOARD_TWL4030=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TSC2102 is not set +# CONFIG_TOUCHSCREEN_TSC210X is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_OMAP=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_TLV320AIC23 is not set +# CONFIG_GPIOEXPANDER_OMAP is not set +# CONFIG_MENELAUS is not set +CONFIG_TWL4030_CORE=y +CONFIG_TWL4030_GPIO=y +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_OMAP24XX is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TSC2101 is not set +# CONFIG_SPI_TSC2102 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_PERSIST is not set +CONFIG_USB_OTG=y +CONFIG_USB_OTG_WHITELIST=y +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 243x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_USB_INVENTRA_FIFO is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +CONFIG_USB_INVENTRA_HCD_LOGGING=1 + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +# CONFIG_USB_ZERO_HNPTEST is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_OMAP=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-omap-2.6.29/omap3-pandora/defconfig b/meta/packages/linux/linux-omap-2.6.29/omap3-pandora/defconfig new file mode 100644 index 000000000..8ac420cc3 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/omap3-pandora/defconfig @@ -0,0 +1,2186 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.28-rc7-omap1 +# Fri Dec 12 19:50:40 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LSF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_SMARTREFLEX=y +# CONFIG_OMAP_SMARTREFLEX_TESTING is not set +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_BOOT_TAG=y +CONFIG_OMAP_BOOT_REASON=y +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_DSS_DEBUG=y +# CONFIG_OMAP2_DSS_RFBI is not set +CONFIG_OMAP2_DSS_VENC=y +# CONFIG_OMAP2_DSS_SDI is not set +CONFIG_OMAP2_DSS_DSI=y +# CONFIG_OMAP2_DSS_USE_DSI_PLL is not set +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=1 +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OVERO is not set +CONFIG_MACH_OMAP3_PANDORA=y +CONFIG_OMAP_TICK_GPTIMER=12 + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=128 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=n + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +CONFIG_CPU_FREQ_DEBUG=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y +CONFIG_ARM_ERRATUM_451034=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=y +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIBTUSB is not set +CONFIG_BT_HCIBTSDIO=y +# CONFIG_BT_HCIUART is not set +CONFIG_BT_HCIBCM203X=y +CONFIG_BT_HCIBPA10X=y +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIBRF6150 is not set +# CONFIG_BT_HCIH4P is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_IEEE80211=y +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=y +CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_CRYPT_TKIP=y +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +# CONFIG_MTD_ONENAND_GENERIC is not set +CONFIG_MTD_ONENAND_OMAP2=y +# CONFIG_MTD_ONENAND_OTP is not set +# CONFIG_MTD_ONENAND_2X_PROGRAM is not set +# CONFIG_MTD_ONENAND_SIM is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_93CX6=m +# CONFIG_ICS932S401 is not set +# CONFIG_OMAP_STI is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +CONFIG_QSEMI_PHY=y +CONFIG_LXT_PHY=y +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=y +# CONFIG_ICPLUS_PHY is not set +CONFIG_REALTEK_PHY=y +CONFIG_FIXED_PHY=y +CONFIG_MDIO_BITBANG=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +CONFIG_SMC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +# CONFIG_LIBERTAS_SDIO is not set +# CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_LIBERTAS_THINFIRM is not set +CONFIG_USB_ZD1201=m +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_IWLWIFI_LEDS is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SMSC95XX is not set +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_TWL4030=y +# CONFIG_KEYBOARD_LM8323 is not set +CONFIG_KEYBOARD_GPIO=m +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TSC2005 is not set +# CONFIG_TOUCHSCREEN_TSC210X is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_MADC=m +CONFIG_TWL4030_USB=y +CONFIG_TWL4030_PWRBUTTON=y +CONFIG_TWL4030_POWEROFF=y +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_LP5521 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_DEBUG=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=m +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_TWL4030_BCI_BATTERY is not set +# CONFIG_BATTERY_BQ27x00 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_TSC210X is not set +CONFIG_SENSORS_OMAP34XX=y +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +CONFIG_TWL4030_CORE=y +CONFIG_TWL4030_POWER=y +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_WM8775=m +CONFIG_VIDEO_SAA711X=m +CONFIG_VIDEO_CX25840=m +CONFIG_VIDEO_CX2341X=m +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_VIDEO_AU0828 is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +# CONFIG_USB_GSPCA is not set +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +# CONFIG_VIDEO_EM28XX is not set +CONFIG_VIDEO_USBVISION=m +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +CONFIG_USB_QUICKCAM_MESSENGER=m +# CONFIG_USB_ET61X251 is not set +CONFIG_VIDEO_OVCAMCHIP=m +CONFIG_USB_W9968CF=m +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_ZR364XX=m +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_USB_DSBR is not set +# CONFIG_USB_SI470X is not set +# CONFIG_USB_MR800 is not set +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Supported USB Adapters +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +# CONFIG_DVB_USB_DW2102 is not set +# CONFIG_DVB_USB_CINERGY_T2 is not set +# CONFIG_DVB_USB_ANYSEE is not set +# CONFIG_DVB_USB_DTV5100 is not set +# CONFIG_DVB_USB_AF9015 is not set +CONFIG_DVB_TTUSB_BUDGET=m +CONFIG_DVB_TTUSB_DEC=m +# CONFIG_DVB_SIANO_SMS1XXX is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# + +# +# Customise DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_S5H1420=m +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set +CONFIG_DVB_STV0299=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +# CONFIG_DVB_DRX397XD is not set +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +# CONFIG_DVB_OR51211 is not set +# CONFIG_DVB_OR51132 is not set +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_S5H1411=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_LNBP21=m +# CONFIG_DVB_ISL6405 is not set +CONFIG_DVB_ISL6421=m +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=14 +CONFIG_FB_OMAP2=y +# CONFIG_FB_OMAP2_DEBUG is not set +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_DVI=y +# CONFIG_PANEL_DVI_640X480 is not set +# CONFIG_PANEL_DVI_800X600 is not set +CONFIG_PANEL_DVI_1024X768=y +# CONFIG_PANEL_DVI_1280X1024 is not set +CONFIG_PANEL_SHARP_LS037V7DW01=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_LTV350QV=y +CONFIG_LCD_ILI9320=y +# CONFIG_LCD_TDO24M is not set +CONFIG_LCD_VGG2432A4=y +CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=y +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP2101=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_FUNSOFT=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MOTOROLA=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +CONFIG_USB_GADGET_M66592=y +CONFIG_USB_M66592=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_OMAP_HS=y +CONFIG_MMC_SPI=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_OMAP_DEBUG is not set +# CONFIG_LEDS_OMAP is not set +# CONFIG_LEDS_OMAP_PWM is not set +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +CONFIG_HFSPLUS_FS=m +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_LATENCYTOP=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +CONFIG_PREEMPT_TRACER=y +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-omap-2.6.29/omap3evm/defconfig b/meta/packages/linux/linux-omap-2.6.29/omap3evm/defconfig new file mode 100644 index 000000000..da726718c --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/omap3evm/defconfig @@ -0,0 +1,2197 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.28-omap1 +# Thu Jan 8 16:06:45 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LSF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_SMARTREFLEX=y +# CONFIG_OMAP_SMARTREFLEX_TESTING is not set +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_BOOT_TAG=y +CONFIG_OMAP_BOOT_REASON=y +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y +# CONFIG_OMAP2_DSS_RFBI is not set +CONFIG_OMAP2_DSS_VENC=y +# CONFIG_OMAP2_DSS_SDI is not set +CONFIG_OMAP2_DSS_DSI=y +CONFIG_OMAP2_DSS_USE_DSI_PLL=y +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=1 +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OMAP_3430SDP is not set +CONFIG_MACH_OMAP3EVM=y +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +CONFIG_OMAP_TICK_GPTIMER=12 + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT=y +CONFIG_HZ=128 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=n + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +CONFIG_CPU_FREQ_DEBUG=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y +CONFIG_ARM_ERRATUM_451034=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=y +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIBTUSB is not set +CONFIG_BT_HCIBTSDIO=y +# CONFIG_BT_HCIUART is not set +CONFIG_BT_HCIBCM203X=y +CONFIG_BT_HCIBPA10X=y +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIBRF6150 is not set +# CONFIG_BT_HCIH4P is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_IEEE80211=y +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=y +CONFIG_IEEE80211_CRYPT_CCMP=y +CONFIG_IEEE80211_CRYPT_TKIP=y +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_ONENAND=y +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +# CONFIG_MTD_ONENAND_GENERIC is not set +CONFIG_MTD_ONENAND_OMAP2=y +# CONFIG_MTD_ONENAND_OTP is not set +# CONFIG_MTD_ONENAND_2X_PROGRAM is not set +# CONFIG_MTD_ONENAND_SIM is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +CONFIG_EEPROM_93CX6=m +# CONFIG_ICS932S401 is not set +# CONFIG_OMAP_STI is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +CONFIG_QSEMI_PHY=y +CONFIG_LXT_PHY=y +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=y +# CONFIG_ICPLUS_PHY is not set +CONFIG_REALTEK_PHY=y +CONFIG_FIXED_PHY=y +CONFIG_MDIO_BITBANG=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +CONFIG_SMC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +# CONFIG_LIBERTAS_SDIO is not set +# CONFIG_LIBERTAS_DEBUG is not set +# CONFIG_LIBERTAS_THINFIRM is not set +CONFIG_USB_ZD1201=m +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_IWLWIFI_LEDS is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SMSC95XX is not set +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_TWL4030=y +# CONFIG_KEYBOARD_LM8323 is not set +CONFIG_KEYBOARD_GPIO=m +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TSC2005 is not set +# CONFIG_TOUCHSCREEN_TSC210X is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +CONFIG_SENSORS_EEPROM=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_MADC=m +CONFIG_TWL4030_PWRBUTTON=y +CONFIG_TWL4030_POWEROFF=y +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_LP5521 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_DEBUG=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=m +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_TWL4030_BCI_BATTERY is not set +# CONFIG_BATTERY_BQ27x00 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_TSC210X is not set +CONFIG_SENSORS_OMAP34XX=y +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +CONFIG_TWL4030_CORE=y +CONFIG_TWL4030_POWER=y +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_WM8775=m +CONFIG_VIDEO_SAA711X=m +CONFIG_VIDEO_CX25840=m +CONFIG_VIDEO_CX2341X=m +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_VIDEO_AU0828 is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +# CONFIG_USB_GSPCA is not set +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +# CONFIG_VIDEO_EM28XX is not set +CONFIG_VIDEO_USBVISION=m +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +CONFIG_USB_QUICKCAM_MESSENGER=m +# CONFIG_USB_ET61X251 is not set +CONFIG_VIDEO_OVCAMCHIP=m +CONFIG_USB_W9968CF=m +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_ZR364XX=m +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_USB_DSBR is not set +# CONFIG_USB_SI470X is not set +# CONFIG_USB_MR800 is not set +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Supported USB Adapters +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +# CONFIG_DVB_USB_DW2102 is not set +# CONFIG_DVB_USB_CINERGY_T2 is not set +# CONFIG_DVB_USB_ANYSEE is not set +# CONFIG_DVB_USB_DTV5100 is not set +# CONFIG_DVB_USB_AF9015 is not set +CONFIG_DVB_TTUSB_BUDGET=m +CONFIG_DVB_TTUSB_DEC=m +# CONFIG_DVB_SIANO_SMS1XXX is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# + +# +# Customise DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_S5H1420=m +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set +CONFIG_DVB_STV0299=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +# CONFIG_DVB_DRX397XD is not set +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +# CONFIG_DVB_OR51211 is not set +# CONFIG_DVB_OR51132 is not set +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_S5H1411=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_LNBP21=m +# CONFIG_DVB_ISL6405 is not set +CONFIG_DVB_ISL6421=m +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=14 +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG=y +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_GENERIC=y +CONFIG_PANEL_SHARP_LS037V7DW01=y +# CONFIG_PANEL_N800 is not set +# CONFIG_CTRL_BLIZZARD is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_LTV350QV=y +CONFIG_LCD_ILI9320=y +# CONFIG_LCD_TDO24M is not set +CONFIG_LCD_VGG2432A4=y +CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=y +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_MCBSP=y +CONFIG_SND_OMAP_SOC_OMAP3EVM=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_TWL4030=y +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP2101=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_FUNSOFT=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MOTOROLA=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +CONFIG_USB_GADGET_M66592=y +CONFIG_USB_M66592=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +CONFIG_USB_GPIO_VBUS=y +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_OMAP_HS=y +CONFIG_MMC_SPI=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_OMAP_DEBUG is not set +# CONFIG_LEDS_OMAP is not set +# CONFIG_LEDS_OMAP_PWM is not set +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_REGULATOR is not set +# CONFIG_UIO is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +CONFIG_HFSPLUS_FS=m +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_LATENCYTOP=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +CONFIG_PREEMPT_TRACER=y +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=m +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-omap-2.6.29/omap3evm/omap3evm-dss2.diff b/meta/packages/linux/linux-omap-2.6.29/omap3evm/omap3evm-dss2.diff new file mode 100644 index 000000000..60832e72c --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/omap3evm/omap3evm-dss2.diff @@ -0,0 +1,443 @@ +From: hvaibhav@ti.com +To: linux-fbdev-devel@lists.sourceforge.net, linux-omap@vger.kernel.org +Cc: Vaibhav Hiremath +Subject: [REVIEW PATCH] Added OMAP3EVM support on Tomis FBDEV/DSS Patches +Date: Fri, 14 Nov 2008 12:02:32 +0530 + +From: Vaibhav Hiremath + +Tested LCD, TV, DVI (480P) out on OMAP3EVM board. + +Please make sure that you change the option +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=7 and apply the +Mans Rullgard clock patches to support set_rate and round_rate API. + +Signed-off-by: Vaibhav Hiremath +--- + arch/arm/mach-omap2/board-omap3evm.c | 224 ++++++++++++++++++++++++++++++++-- + drivers/video/omap2/Kconfig | 5 + + drivers/video/omap2/Makefile | 1 + + drivers/video/omap2/panel-omap3evm.c | 110 +++++++++++++++++ + 5 files changed, 341 insertions(+), 53 deletions(-) + create mode 100644 drivers/video/omap2/panel-omap3evm.c + +diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c +index 42ab826..e244fa7 100644 +--- a/arch/arm/mach-omap2/board-omap3evm.c ++++ b/arch/arm/mach-omap2/board-omap3evm.c +@@ -37,6 +37,8 @@ + #include + #include + #include ++#include ++#include + + #include "sdram-micron-mt46h32m32lf-6.h" + #include "twl4030-generic-scripts.h" +@@ -161,14 +163,215 @@ static int __init omap3_evm_i2c_init(void) + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; + } ++static struct omap_fbmem_config evm_fbmem0_config = { ++ .size = 480*720*4, ++ .start = OMAPFB_MEMTYPE_SDRAM, ++}; + +-static struct platform_device omap3_evm_lcd_device = { +- .name = "omap3evm_lcd", +- .id = -1, ++static struct omap_fbmem_config evm_fbmem1_config = { ++ .size = 480*720*4, ++ .start = OMAPFB_MEMTYPE_SDRAM, + }; + +-static struct omap_lcd_config omap3_evm_lcd_config __initdata = { +- .ctrl_name = "internal", ++static struct omap_fbmem_config evm_fbmem2_config = { ++ .size = 480*720*4, ++ .start = OMAPFB_MEMTYPE_SDRAM, ++}; ++#define LCD_PANEL_LR 2 ++#define LCD_PANEL_UD 3 ++#define LCD_PANEL_INI 152 ++#define LCD_PANEL_ENABLE_GPIO 153 ++#define LCD_PANEL_QVGA 154 ++#define LCD_PANEL_RESB 155 ++ ++#define ENABLE_VDAC_DEDICATED 0x03 ++#define ENABLE_VDAC_DEV_GRP 0x20 ++#define ENABLE_VPLL2_DEDICATED 0x05 ++#define ENABLE_VPLL2_DEV_GRP 0xE0 ++ ++#define TWL4030_GPIODATA_IN3 0x03 ++#define TWL4030_GPIODATA_DIR3 0x06 ++#define TWL4030_VPLL2_DEV_GRP 0x33 ++#define TWL4030_VPLL2_DEDICATED 0x36 ++ ++static int lcd_enabled; ++static int dvi_enabled; ++ ++static void __init evm_display_init(void) ++{ ++ int r; ++ r = gpio_request(LCD_PANEL_LR, "lcd_panel_lr"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_LR\n"); ++ return; ++ } ++ r = gpio_request(LCD_PANEL_UD, "lcd_panel_ud"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_UD\n"); ++ goto err_1; ++ } ++ ++ r = gpio_request(LCD_PANEL_INI, "lcd_panel_ini"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_INI\n"); ++ goto err_2; ++ } ++ r = gpio_request(LCD_PANEL_RESB, "lcd_panel_resb"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_RESB\n"); ++ goto err_3; ++ } ++ r = gpio_request(LCD_PANEL_QVGA, "lcd_panel_qvga"); ++ if (r) { ++ printk(KERN_ERR "failed to get LCD_PANEL_QVGA\n"); ++ goto err_4; ++ } ++ ++ gpio_direction_output(LCD_PANEL_LR, 0); ++ gpio_direction_output(LCD_PANEL_UD, 0); ++ gpio_direction_output(LCD_PANEL_INI, 0); ++ gpio_direction_output(LCD_PANEL_RESB, 0); ++ gpio_direction_output(LCD_PANEL_QVGA, 0); ++ ++#define TWL_LED_LEDEN 0x00 ++#define TWL_PWMA_PWMAON 0x00 ++#define TWL_PWMA_PWMAOFF 0x01 ++ ++ twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); ++ ++ gpio_direction_output(LCD_PANEL_RESB, 1); ++ gpio_direction_output(LCD_PANEL_INI, 1); ++ gpio_direction_output(LCD_PANEL_QVGA, 0); ++ gpio_direction_output(LCD_PANEL_LR, 1); ++ gpio_direction_output(LCD_PANEL_UD, 1); ++ ++ return; ++ ++err_4: ++ gpio_free(LCD_PANEL_RESB); ++err_3: ++ gpio_free(LCD_PANEL_INI); ++err_2: ++ gpio_free(LCD_PANEL_UD); ++err_1: ++ gpio_free(LCD_PANEL_LR); ++ ++} ++ ++static int panel_enable_lcd(struct omap_display *display) ++{ ++ if (dvi_enabled) { ++ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); ++ return -EINVAL; ++ } ++ if (omap_rev() > OMAP3430_REV_ES1_0) { ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VPLL2_DEDICATED, TWL4030_VPLL2_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VPLL2_DEV_GRP, TWL4030_VPLL2_DEV_GRP); ++ } ++ gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0); ++ lcd_enabled = 1; ++ return 0; ++} ++ ++static void panel_disable_lcd(struct omap_display *display) ++{ ++ if (omap_rev() > OMAP3430_REV_ES1_0) { ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, ++ TWL4030_VPLL2_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, ++ TWL4030_VPLL2_DEV_GRP); ++ } ++ gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1); ++ lcd_enabled = 0; ++} ++ ++static struct omap_display_data evm_display_data = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "lcd", ++ .panel_name = "panel-sdp3430", ++ .u.dpi.data_lines = 16, ++ .panel_enable = panel_enable_lcd, ++ .panel_disable = panel_disable_lcd, ++}; ++ ++static int panel_enable_tv(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEDICATED, TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); ++ return 0; ++} ++ ++static void panel_disable_tv(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, ++ TWL4030_VDAC_DEV_GRP); ++} ++ ++static struct omap_display_data evm_display_data_tv = { ++ .type = OMAP_DISPLAY_TYPE_VENC, ++ .name = "tv", ++ .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, ++ .panel_enable = panel_enable_tv, ++ .panel_disable = panel_disable_tv, ++}; ++ ++ ++static int panel_enable_dvi(struct omap_display *display) ++{ ++ if (lcd_enabled) { ++ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); ++ return -EINVAL; ++ } ++ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, ++ TWL4030_GPIODATA_IN3); ++ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, ++ TWL4030_GPIODATA_DIR3); ++ dvi_enabled = 1; ++ ++ return 0; ++} ++ ++static void panel_disable_dvi(struct omap_display *display) ++{ ++ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x00, ++ TWL4030_GPIODATA_IN3); ++ twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x00, ++ TWL4030_GPIODATA_DIR3); ++ dvi_enabled = 0; ++} ++ ++ ++static struct omap_display_data evm_display_data_dvi = { ++ .type = OMAP_DISPLAY_TYPE_DPI, ++ .name = "dvi", ++ .panel_name = "panel-dvi", ++ .u.dpi.data_lines = 24, ++ .panel_enable = panel_enable_dvi, ++ .panel_disable = panel_disable_dvi, ++}; ++ ++static struct omap_dss_platform_data evm_dss_data = { ++ .num_displays = 3, ++ .displays = { ++ &evm_display_data, ++ &evm_display_data_dvi, ++ &evm_display_data_tv, ++ } ++}; ++static struct platform_device evm_dss_device = { ++ .name = "omap-dss", ++ .id = -1, ++ .dev = { ++ .platform_data = &evm_dss_data, ++ }, + }; + + static void ads7846_dev_init(void) +@@ -227,11 +430,13 @@ static void __init omap3_evm_init_irq(void) + + static struct omap_board_config_kernel omap3_evm_config[] __initdata = { + { OMAP_TAG_UART, &omap3_evm_uart_config }, +- { OMAP_TAG_LCD, &omap3_evm_lcd_config }, ++ { OMAP_TAG_FBMEM, &evm_fbmem0_config }, ++ { OMAP_TAG_FBMEM, &evm_fbmem1_config }, ++ { OMAP_TAG_FBMEM, &evm_fbmem2_config }, + }; + + static struct platform_device *omap3_evm_devices[] __initdata = { +- &omap3_evm_lcd_device, ++ &evm_dss_device, + &omap3evm_smc911x_device, + }; + +@@ -250,8 +455,6 @@ static void __init omap3_evm_init(void) + omap3_evm_i2c_init(); + + platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices)); +- omap_board_config = omap3_evm_config; +- omap_board_config_size = ARRAY_SIZE(omap3_evm_config); + + spi_register_board_info(omap3evm_spi_board_info, + ARRAY_SIZE(omap3evm_spi_board_info)); +@@ -262,10 +465,13 @@ static void __init omap3_evm_init(void) + usb_ehci_init(); + omap3evm_flash_init(); + ads7846_dev_init(); ++ evm_display_init(); + } + + static void __init omap3_evm_map_io(void) + { ++ omap_board_config = omap3_evm_config; ++ omap_board_config_size = ARRAY_SIZE(omap3_evm_config); + omap2_set_globals_343x(); + omap2_map_common_io(); + } +diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig +index 95691ad..8211ffd 100644 +--- a/drivers/video/omap2/Kconfig ++++ b/drivers/video/omap2/Kconfig +@@ -51,4 +51,9 @@ config PANEL_SDP3430 + help + SDP3430 LCD + ++config PANEL_OMAP3EVM ++ tristate "OMAP3EVM Panel" ++ depends on OMAP2_DSS ++ help ++ OMAP3EVM LCD Panel + endmenu +diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile +index 73ab1c0..668e8c6 100644 +--- a/drivers/video/omap2/Makefile ++++ b/drivers/video/omap2/Makefile +@@ -3,3 +3,4 @@ omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o + + obj-$(CONFIG_PANEL_DVI) += panel-dvi.o + obj-$(CONFIG_PANEL_SDP3430) += panel-sdp3430.o ++obj-$(CONFIG_PANEL_OMAP3EVM) += panel-omap3evm.o +diff --git a/drivers/video/omap2/panel-omap3evm.c b/drivers/video/omap2/panel-omap3evm.c +new file mode 100644 +index 0000000..4a00b02 +--- /dev/null ++++ b/drivers/video/omap2/panel-omap3evm.c +@@ -0,0 +1,110 @@ ++/* ++ * LCD panel support for the TI OMAP3EVM board ++ * ++ * Copyright (C) 2008 Texas Instruments, Inc. ++ * Author: Vaibhav Hiremath ++ * ++ * Derived from drivers/video/omap2/panel-sdp3430.c ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published by ++ * the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for ++ * more details. ++ * ++ * You should have received a copy of the GNU General Public License along with ++ * this program. If not, see . ++ */ ++ ++#include ++#include ++ ++#include ++ ++static int omap3evm_panel_init(struct omap_display *display) ++{ ++ return 0; ++} ++ ++static void omap3evm_panel_cleanup(struct omap_display *display) ++{ ++} ++ ++static int omap3evm_panel_enable(struct omap_display *display) ++{ ++ int r = 0; ++ ++ if (display->hw_config.panel_enable) ++ r = display->hw_config.panel_enable(display); ++ ++ return r; ++} ++ ++static void omap3evm_panel_disable(struct omap_display *display) ++{ ++ if (display->hw_config.panel_disable) ++ display->hw_config.panel_disable(display); ++} ++ ++static int omap3evm_panel_suspend(struct omap_display *display) ++{ ++ omap3evm_panel_disable(display); ++ return 0; ++} ++ ++static int omap3evm_panel_resume(struct omap_display *display) ++{ ++ return omap3evm_panel_enable(display); ++} ++ ++static struct omap_panel omap3evm_panel = { ++ .owner = THIS_MODULE, ++ .name = "panel-evm", ++ .init = omap3evm_panel_init, ++ .cleanup = omap3evm_panel_cleanup, ++ .enable = omap3evm_panel_enable, ++ .disable = omap3evm_panel_disable, ++ .suspend = omap3evm_panel_suspend, ++ .resume = omap3evm_panel_resume, ++ /*.set_mode = omap3evm_set_mode, */ ++ ++ .timings = { ++ .pixel_clock = 26000, ++ ++ .hsw = 4, ++ .hfp = 4, ++ .hbp = 40, ++ ++ .vsw = 2, ++ .vfp = 2, ++ .vbp = 7, ++ }, ++ ++ .acb = 0x28, ++ ++ .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | ++ OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IPC, ++ ++ .x_res = 480, ++ .y_res = 640, ++ .bpp = 18, ++}; ++ ++ ++static int __init omap3evm_panel_drv_init(void) ++{ ++ omap_dss_register_panel(&omap3evm_panel); ++ return 0; ++} ++ ++static void __exit omap3evm_panel_drv_exit(void) ++{ ++ omap_dss_unregister_panel(&omap3evm_panel); ++} ++ ++module_init(omap3evm_panel_drv_init); ++module_exit(omap3evm_panel_drv_exit); ++MODULE_LICENSE("GPL"); +-- +1.5.6 + +-- +To unsubscribe from this list: send the line "unsubscribe linux-omap" in +the body of a message to majordomo@vger.kernel.org +More majordomo info at http://vger.kernel.org/majordomo-info.html + diff --git a/meta/packages/linux/linux-omap-2.6.29/omap3evm/omap3evm-lcd-redtint.diff b/meta/packages/linux/linux-omap-2.6.29/omap3evm/omap3evm-lcd-redtint.diff new file mode 100644 index 000000000..54ea3c9f6 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/omap3evm/omap3evm-lcd-redtint.diff @@ -0,0 +1,66 @@ +Message-ID: +Date: Sat, 27 Sep 2008 03:46:18 -0400 +From: "arun c" +To: "Daniel Schaeffer" +Subject: Re: OMAP3EVM LCD red tint + +Hi Daniel Schaeffer + +On Fri, Sep 26, 2008 at 4:20 PM, Daniel Schaeffer + wrote: +> Has anyone looked into why the LCD display on the OMAP3EVM is always tinted +> red? I created a couple of color test images that I cat'ed to /dev/fb and it +> looks like the blue color channel is completely ignored. I was testing on +> v2.6.26-omap2 but is doesn't look like there have been any changes to the fb +> driver since then so I'm assuming the issue is also present in the head of +> the git tree. +> +> Regards, +> +> Daniel Schaeffer +> + +Try the patch below(Remember that you may have to manually edit because +this patch is against current HEAD) + + +diff --git a/drivers/video/omap/lcd_omap3evm.c +b/drivers/video/omap/lcd_omap3evm.c +index a564ca5..821bafe 100644 +--- a/drivers/video/omap/lcd_omap3evm.c ++++ b/drivers/video/omap/lcd_omap3evm.c +@@ -44,6 +44,8 @@ + #define ENABLE_VDAC_DEV_GRP 0x20 + #define ENABLE_VPLL2_DEDICATED 0x05 + #define ENABLE_VPLL2_DEV_GRP 0xE0 ++#define TWL4030_VPLL2_DEV_GRP 0x33 ++#define TWL4030_VPLL2_DEDICATED 0x36 + + #define TWL_LED_LEDEN 0x00 + #define TWL_PWMA_PWMAON 0x00 +@@ -86,12 +88,24 @@ static void omap3evm_panel_cleanup(struct lcd_panel *panel) + + static int omap3evm_panel_enable(struct lcd_panel *panel) + { ++ if (omap_rev > OMAP3430_REV_ES1_0) { ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VPLL2_DEDICATED, TWL4030_VPLL2_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, ++ ENABLE_VPLL2_DEV_GRP, TWL4030_VPLL2_DEV_GRP); ++ } + omap_set_gpio_dataout(LCD_PANEL_ENABLE_GPIO, 0); + return 0; + } + + static void omap3evm_panel_disable(struct lcd_panel *panel) + { ++ if (omap_rev > OMAP3430_REV_ES1_0) { ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, ++ TWL4030_VPLL2_DEDICATED); ++ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0, ++ TWL4030_VPLL2_DEV_GRP); ++ } + omap_set_gpio_dataout(LCD_PANEL_ENABLE_GPIO, 1); + } + + diff --git a/meta/packages/linux/linux-omap-2.6.29/omap5912osk/defconfig b/meta/packages/linux/linux-omap-2.6.29/omap5912osk/defconfig new file mode 100644 index 000000000..3c334868e --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/omap5912osk/defconfig @@ -0,0 +1,1098 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23-rc2-omap1 +# Tue Aug 21 23:22:37 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +CONFIG_ARCH_OMAP1=y +# CONFIG_ARCH_OMAP2 is not set +# CONFIG_ARCH_OMAP3 is not set + +# +# OMAP Feature Selections +# +CONFIG_OMAP_RESET_CLOCKS=y +# CONFIG_OMAP_BOOT_TAG is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y +# CONFIG_OMAP_STI is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MMU_FWK is not set +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +# CONFIG_OMAP_DM_TIMER is not set +CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_SERIAL_WAKE=y +# CONFIG_OMAP_DSP is not set + +# +# OMAP Core Type +# +# CONFIG_ARCH_OMAP730 is not set +# CONFIG_ARCH_OMAP15XX is not set +CONFIG_ARCH_OMAP16XX=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP_INNOVATOR is not set +# CONFIG_MACH_OMAP_H2 is not set +# CONFIG_MACH_OMAP_H3 is not set +CONFIG_MACH_OMAP_OSK=y +# CONFIG_OMAP_OSK_MISTRAL is not set +# CONFIG_MACH_NOKIA770 is not set +# CONFIG_MACH_OMAP_GENERIC is not set + +# +# OMAP CPU Speed +# +# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set +# CONFIG_OMAP_ARM_216MHZ is not set +CONFIG_OMAP_ARM_192MHZ=y +# CONFIG_OMAP_ARM_168MHZ is not set +# CONFIG_OMAP_ARM_120MHZ is not set +# CONFIG_OMAP_ARM_60MHZ is not set +# CONFIG_OMAP_ARM_30MHZ is not set +# CONFIG_MACH_OMAP_APOLLON_PLUS is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_OMAP_CF=y + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_APM_EMULATION is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_IDE=m +CONFIG_BLK_DEV_IDE=m + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=m +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=m +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_IDEPCI_PCIBUS_ORDER is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_OMAP=y +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m +CONFIG_HW_RANDOM_OMAP=m +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TPS65010=y +# CONFIG_SENSORS_TLV320AIC23 is not set +# CONFIG_GPIOEXPANDER_OMAP is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_NEW_LEDS is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_OMAP=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +# CONFIG_FB_OMAP_DMA_TUNE is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-omap-2.6.29/omapzoom/defconfig b/meta/packages/linux/linux-omap-2.6.29/omapzoom/defconfig new file mode 100644 index 000000000..aa11eb04f --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/omapzoom/defconfig @@ -0,0 +1,1951 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-omap1 +# Mon Mar 30 15:25:29 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBD=y +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_SMARTREFLEX=y +# CONFIG_OMAP_SMARTREFLEX_TESTING is not set +CONFIG_OMAP_RESET_CLOCKS=y +CONFIG_OMAP_BOOT_TAG=y +CONFIG_OMAP_BOOT_REASON=y +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +CONFIG_OMAP_MUX=y +CONFIG_OMAP_MUX_DEBUG=y +CONFIG_OMAP_MUX_WARNINGS=y +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_TICK_GPTIMER=1 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_OMAP_SERIAL_WAKE=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_NOKIA_RX51 is not set +CONFIG_MACH_OMAP_LDP=y +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3_PANDORA is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=n + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y +# CONFIG_ARM_ERRATUM_451034 is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_STP=m +CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +# CONFIG_BT_BNEP_PROTO_FILTER is not set +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=y +CONFIG_BT_HCIBTSDIO=y +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIBRF6150 is not set +# CONFIG_BT_HCIH4P is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=y +CONFIG_LIB80211_CRYPT_WEP=y +CONFIG_LIB80211_CRYPT_CCMP=y +CONFIG_LIB80211_CRYPT_TKIP=y +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +CONFIG_MTD_OMAP_NOR=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_ECC_SMC=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_OMAP_STI is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +CONFIG_EEPROM_93CX6=y +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +CONFIG_SMC911X=y +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +CONFIG_USB_ZD1201=y +CONFIG_USB_NET_RNDIS_WLAN=y +CONFIG_RTL8187=y +# CONFIG_MAC80211_HWSIM is not set +CONFIG_P54_COMMON=y +CONFIG_P54_USB=y +# CONFIG_IWLWIFI_LEDS is not set +CONFIG_HOSTAP=y +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +CONFIG_ZD1211RW=y +# CONFIG_ZD1211RW_DEBUG is not set +CONFIG_RT2X00=y +CONFIG_RT2500USB=y +CONFIG_RT73USB=y +CONFIG_RT2X00_LIB_USB=y +CONFIG_RT2X00_LIB=y +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_LEDS=y +# CONFIG_RT2X00_DEBUG is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_SMSC95XX is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=y +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +CONFIG_USB_NET_RNDIS_HOST=y +CONFIG_USB_NET_CDC_SUBSET=y +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=y +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_PPPOL2TP=m +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_JOYDEV=m +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_TWL4030=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TSC2005 is not set +# CONFIG_TOUCHSCREEN_TSC210X is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +CONFIG_TWL4030_MADC=y +# CONFIG_TWL4030_POWEROFF is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +CONFIG_W1=y + +# +# 1-wire Bus Masters +# +# CONFIG_W1_MASTER_DS2490 is not set +# CONFIG_W1_MASTER_DS2482 is not set +# CONFIG_W1_MASTER_DS1WM is not set +# CONFIG_W1_MASTER_GPIO is not set +CONFIG_HDQ_MASTER_OMAP=y + +# +# 1-wire Slaves +# +# CONFIG_W1_SLAVE_THERM is not set +# CONFIG_W1_SLAVE_SMEM is not set +# CONFIG_W1_SLAVE_DS2431 is not set +# CONFIG_W1_SLAVE_DS2433 is not set +# CONFIG_W1_SLAVE_DS2760 is not set +CONFIG_W1_SLAVE_BQ27000=y +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +CONFIG_TWL4030_BCI_BATTERY=y +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TDA9875 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set + +# +# Video decoders +# +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_TCM825X is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_CX25840 is not set + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VIDEO_CLASS is not set +# CONFIG_USB_GSPCA is not set +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_USB_DSBR is not set +# CONFIG_USB_SI470X is not set +# CONFIG_USB_MR800 is not set +# CONFIG_RADIO_TEA5764 is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +CONFIG_FB_FOREIGN_ENDIAN=y +CONFIG_FB_BOTH_ENDIAN=y +# CONFIG_FB_BIG_ENDIAN is not set +# CONFIG_FB_LITTLE_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_FB_OMAP=y +CONFIG_FB_OMAP_LCD_VGA=y +# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=14 +# CONFIG_OMAP2_DSS is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_LTV350QV=y +CONFIG_LCD_ILI9320=y +# CONFIG_LCD_TDO24M is not set +CONFIG_LCD_VGG2432A4=y +CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=y +CONFIG_SND_USB_CAIAQ=y +# CONFIG_SND_USB_CAIAQ_INPUT is not set +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +CONFIG_USB_GADGET_M66592=y +CONFIG_USB_M66592=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_OMAP_DEBUG is not set +CONFIG_LEDS_OMAP=y +CONFIG_LEDS_OMAP_PWM=y +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +CONFIG_REGULATOR_BQ24022=y +CONFIG_REGULATOR_TWL4030=y +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=y + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-omap-2.6.29/overo/defconfig b/meta/packages/linux/linux-omap-2.6.29/overo/defconfig new file mode 100644 index 000000000..0101ca509 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/overo/defconfig @@ -0,0 +1,2248 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-omap1 +# Wed Apr 8 18:20:57 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBD=y +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_FREEZER=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_SMARTREFLEX=y +# CONFIG_OMAP_SMARTREFLEX_TESTING is not set +# CONFIG_OMAP_RESET_CLOCKS is not set +CONFIG_OMAP_BOOT_TAG=y +CONFIG_OMAP_BOOT_REASON=y +# CONFIG_OMAP_COMPONENT_VERSION is not set +# CONFIG_OMAP_GPIO_SWITCH is not set +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_IOMMU is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_TICK_GPTIMER=1 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3_BEAGLE is not set +CONFIG_MACH_OVERO=y +# CONFIG_MACH_OMAP3_PANDORA is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=128 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y +# CONFIG_ARM_ERRATUM_451034 is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=y +CONFIG_BT_HCIBTSDIO=y +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=y +CONFIG_BT_HCIBPA10X=y +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIBRF6150 is not set +# CONFIG_BT_HCIH4P is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_NL80211=y +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=m +CONFIG_LIB80211_CRYPT_WEP=m +CONFIG_LIB80211_CRYPT_CCMP=m +CONFIG_LIB80211_CRYPT_TKIP=m +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +CONFIG_MTD_UBI_GLUEBI=y + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_EEPROM_93CX6=m +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=m + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=m +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_DEBUG=y +# CONFIG_LIBERTAS_THINFIRM is not set +CONFIG_USB_ZD1201=m +CONFIG_USB_NET_RNDIS_WLAN=m +CONFIG_RTL8187=m +# CONFIG_MAC80211_HWSIM is not set +CONFIG_P54_COMMON=m +CONFIG_P54_USB=m +# CONFIG_IWLWIFI_LEDS is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_LEDS=y +# CONFIG_RT2X00_DEBUG is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=y +CONFIG_USB_NET_AX8817X=y +CONFIG_USB_NET_CDCETHER=y +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_TWL4030 is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=m +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_TSC2005 is not set +# CONFIG_TOUCHSCREEN_TSC210X is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +CONFIG_TWL4030_MADC=m +CONFIG_TWL4030_POWEROFF=y +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_TSC210X is not set +# CONFIG_SPI_TSC2301 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=m +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_TWL4030_BCI_BATTERY is not set +# CONFIG_BATTERY_BQ27x00 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_TSC210X is not set +CONFIG_SENSORS_OMAP34XX=y +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +CONFIG_MEDIA_ATTACH=y +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_WM8775=m +CONFIG_VIDEO_SAA711X=m +CONFIG_VIDEO_CX25840=m +CONFIG_VIDEO_CX2341X=m +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_VIDEO_AU0828 is not set +# CONFIG_VIDEO_OMAP3 is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +# CONFIG_USB_GSPCA is not set +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +# CONFIG_VIDEO_EM28XX is not set +CONFIG_VIDEO_USBVISION=m +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +CONFIG_USB_QUICKCAM_MESSENGER=m +# CONFIG_USB_ET61X251 is not set +CONFIG_VIDEO_OVCAMCHIP=m +CONFIG_USB_W9968CF=m +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_ZR364XX=m +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_USB_DSBR is not set +# CONFIG_USB_SI470X is not set +# CONFIG_USB_MR800 is not set +# CONFIG_RADIO_TEA5764 is not set +# CONFIG_DVB_DYNAMIC_MINORS is not set +CONFIG_DVB_CAPTURE_DRIVERS=y +# CONFIG_TTPCI_EEPROM is not set + +# +# Supported USB Adapters +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +# CONFIG_DVB_USB_DW2102 is not set +# CONFIG_DVB_USB_CINERGY_T2 is not set +# CONFIG_DVB_USB_ANYSEE is not set +# CONFIG_DVB_USB_DTV5100 is not set +# CONFIG_DVB_USB_AF9015 is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported DVB Frontends +# + +# +# Customise DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set + +# +# Multistandard (satellite) frontends +# +# CONFIG_DVB_STB0899 is not set +# CONFIG_DVB_STB6100 is not set + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_S5H1420=m +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set +CONFIG_DVB_STV0299=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +# CONFIG_DVB_TDA8261 is not set +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +# CONFIG_DVB_TUNER_CX24113 is not set +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +# CONFIG_DVB_DRX397XD is not set +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +# CONFIG_DVB_OR51211 is not set +# CONFIG_DVB_OR51132 is not set +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +# CONFIG_DVB_LGDT3304 is not set +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_S5H1411=m + +# +# ISDB-T (terrestrial) frontends +# +# CONFIG_DVB_S921 is not set + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_LNBP21=m +# CONFIG_DVB_ISL6405 is not set +CONFIG_DVB_ISL6421=m +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_DSS_VRAM_SIZE=10 +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y +# CONFIG_OMAP2_DSS_RFBI is not set +CONFIG_OMAP2_DSS_VENC=y +# CONFIG_OMAP2_DSS_SDI is not set +CONFIG_OMAP2_DSS_DSI=y +CONFIG_OMAP2_DSS_USE_DSI_PLL=y +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_GENERIC=y +CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C=y +# CONFIG_PANEL_SHARP_LS037V7DW01 is not set +# CONFIG_PANEL_N800 is not set +# CONFIG_CTRL_BLIZZARD is not set +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG_SUPPORT=y +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set +CONFIG_FB_OMAP2_NUM_FBS=3 +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_HRTIMER=m +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DEBUG=y +# CONFIG_SND_DEBUG_VERBOSE is not set +# CONFIG_SND_PCM_XRUN_DEBUG is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=y +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_MCBSP=y +CONFIG_SND_OMAP_SOC_OVERO=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_TWL4030=y +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_OMAP_EHCI_PHY_MODE=y +# CONFIG_OMAP_EHCI_TLL_MODE is not set +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +CONFIG_USB_MUSB_DEBUG=y + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=y +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +CONFIG_USB_SERIAL_OPTION=m +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +CONFIG_USB_GADGET_OMAP=y +CONFIG_USB_OMAP=y +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_OMAP_DEBUG is not set +# CONFIG_LEDS_OMAP is not set +# CONFIG_LEDS_OMAP_PWM is not set +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_DEBUG=y +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# CBUS support +# +# CONFIG_CBUS is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/meta/packages/linux/linux-omap-2.6.29/overo/ehci.patch b/meta/packages/linux/linux-omap-2.6.29/overo/ehci.patch new file mode 100644 index 000000000..72c6b9bec --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/overo/ehci.patch @@ -0,0 +1,113 @@ +diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c +index 489439d..2c6305b 100644 +--- a/arch/arm/mach-omap2/usb-ehci.c ++++ b/arch/arm/mach-omap2/usb-ehci.c +@@ -152,9 +152,7 @@ static void setup_ehci_io_mux(void) + + void __init usb_ehci_init(void) + { +- /* Setup Pin IO MUX for EHCI */ +- if (cpu_is_omap34xx()) +- setup_ehci_io_mux(); ++ /* TODO: Setup Pin IO MUX for EHCI - moved this temporarily to U-boot */ + + if (platform_device_register(&ehci_device) < 0) { + printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n"); + +diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c +index 1b3266c..8472996 100644 +--- a/drivers/usb/host/ehci-omap.c ++++ b/drivers/usb/host/ehci-omap.c +@@ -48,16 +48,26 @@ + * to get the PHY state machine in working state + */ + #define EXTERNAL_PHY_RESET ++#ifdef CONFIG_MACH_OVERO ++#define EXT_PHY_RESET_GPIO_PORT2 (183) ++#else + #define EXT_PHY_RESET_GPIO_PORT1 (57) + #define EXT_PHY_RESET_GPIO_PORT2 (61) ++#endif + #define EXT_PHY_RESET_DELAY (10) + ++#define PHY_STP_PULLUP_ENABLE (0x10) ++#define PHY_STP_PULLUP_DISABLE (0x90) ++ ++ + /* ISSUE2: + * USBHOST supports External charge pump PHYs only + * Use the VBUS from Port1 to power VBUS of Port2 externally + * So use Port2 as the working ULPI port + */ ++#ifndef CONFIG_MACH_OVERO + #define VBUS_INTERNAL_CHARGEPUMP_HACK ++#endif + + #endif /* CONFIG_OMAP_EHCI_PHY_MODE */ + +@@ -225,14 +235,43 @@ static int omap_start_ehc(struct platform_device *dev, struct usb_hcd *hcd) + + #ifdef EXTERNAL_PHY_RESET + /* Refer: ISSUE1 */ ++#ifndef CONFIG_MACH_OVERO + gpio_request(EXT_PHY_RESET_GPIO_PORT1, "USB1 PHY reset"); + gpio_direction_output(EXT_PHY_RESET_GPIO_PORT1, 0); ++#endif + gpio_request(EXT_PHY_RESET_GPIO_PORT2, "USB2 PHY reset"); + gpio_direction_output(EXT_PHY_RESET_GPIO_PORT2, 0); ++ gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 0); + /* Hold the PHY in RESET for enough time till DIR is high */ + udelay(EXT_PHY_RESET_DELAY); + #endif + ++ /* ++ * The PHY register 0x7 - Interface Control register is ++ * configured to disable the integrated STP pull-up resistor ++ * used for interface protection. ++ * ++ * May not need to be here. ++ */ ++ omap_writel((0x7 << EHCI_INSNREG05_ULPI_REGADD_SHIFT) |/* interface reg */ ++ (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) |/* Write */ ++ (1 << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) |/* Port1 */ ++ (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT) |/* Start */ ++ (PHY_STP_PULLUP_DISABLE), ++ EHCI_INSNREG05_ULPI); ++ ++ while (!(omap_readl(EHCI_INSNREG05_ULPI) & (1<usbtll_fck_clk = clk_get(&dev->dev, USBHOST_TLL_FCLK); + if (IS_ERR(ehci_clocks->usbtll_fck_clk)) +@@ -307,7 +346,9 @@ static int omap_start_ehc(struct platform_device *dev, struct usb_hcd *hcd) + * Hold the PHY in RESET for enough time till PHY is settled and ready + */ + udelay(EXT_PHY_RESET_DELAY); ++#ifndef CONFIG_MACH_OVERO + gpio_set_value(EXT_PHY_RESET_GPIO_PORT1, 1); ++#endif + gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 1); + #endif + +@@ -393,7 +434,9 @@ static void omap_stop_ehc(struct platform_device *dev, struct usb_hcd *hcd) + + + #ifdef EXTERNAL_PHY_RESET ++#ifndef CONFIG_MACH_OVERO + gpio_free(EXT_PHY_RESET_GPIO_PORT1); ++#endif + gpio_free(EXT_PHY_RESET_GPIO_PORT2); + #endif + +-- +1.6.0.4.790.gaa14a diff --git a/meta/packages/linux/linux-omap-2.6.29/read_die_ids.patch b/meta/packages/linux/linux-omap-2.6.29/read_die_ids.patch new file mode 100644 index 000000000..3f6c930cc --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/read_die_ids.patch @@ -0,0 +1,23 @@ +OMAP2/3 TAP: enable debug messages + +From: Paul Walmsley + +This patch causes the OMAP2/3 chip ID code to display the full DIE_ID registers at boot. + +--- + + arch/arm/mach-omap2/id.c | 1 + + 1 files changed, 1 insertions(+), 0 deletions(-) + +diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c +index c7f9ab7..a154b5e 100644 +--- a/arch/arm/mach-omap2/id.c ++++ b/arch/arm/mach-omap2/id.c +@@ -10,6 +10,7 @@ + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ ++#define DEBUG + + #include + #include diff --git a/meta/packages/linux/linux-omap-2.6.29/timer-suppression.patch b/meta/packages/linux/linux-omap-2.6.29/timer-suppression.patch new file mode 100644 index 000000000..04362c96e --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/timer-suppression.patch @@ -0,0 +1,43 @@ +diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c +index b854a89..26f5569 100644 +--- a/kernel/time/tick-sched.c ++++ b/kernel/time/tick-sched.c +@@ -253,6 +253,16 @@ void tick_nohz_stop_sched_tick(void) + + /* Schedule the tick, if we are at least one jiffie off */ + if ((long)delta_jiffies >= 1) { ++ /* ++ * calculate the expiry time for the next timer wheel ++ * timer ++ */ ++ expires = ktime_add_ns(last_update, tick_period.tv64 * ++ delta_jiffies); ++ ++ /* Skip reprogram of event if its not changed */ ++ if(ts->tick_stopped && ktime_equal(expires, dev->next_event)) ++ goto out2; + + if (delta_jiffies > 1) + cpu_set(cpu, nohz_cpu_mask); +@@ -304,12 +314,7 @@ void tick_nohz_stop_sched_tick(void) + goto out; + } + +- /* +- * calculate the expiry time for the next timer wheel +- * timer +- */ +- expires = ktime_add_ns(last_update, tick_period.tv64 * +- delta_jiffies); ++ /* Mark expiries */ + ts->idle_expires = expires; + + if (ts->nohz_mode == NOHZ_MODE_HIGHRES) { +@@ -328,6 +333,7 @@ void tick_nohz_stop_sched_tick(void) + tick_do_update_jiffies64(ktime_get()); + cpu_clear(cpu, nohz_cpu_mask); + } ++out2: + raise_softirq_irqoff(TIMER_SOFTIRQ); + out: + ts->next_jiffies = next_jiffies; diff --git a/meta/packages/linux/linux-omap-2.6.29/touchscreen.patch b/meta/packages/linux/linux-omap-2.6.29/touchscreen.patch new file mode 100644 index 000000000..2325c401e --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/touchscreen.patch @@ -0,0 +1,22 @@ +diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c +index d8109ae..f8ce669 100644 +--- a/arch/arm/mach-omap2/board-omap3evm.c ++++ b/arch/arm/mach-omap2/board-omap3evm.c +@@ -128,8 +128,16 @@ static int ads7846_get_pendown_state(void) + } + + struct ads7846_platform_data ads7846_config = { ++ .x_max = 0x0fff, ++ .y_max = 0x0fff, ++ .x_plate_ohms = 180, ++ .pressure_max = 255, ++ .debounce_max = 10, ++ .debounce_tol = 3, ++ .debounce_rep = 1, + .get_pendown_state = ads7846_get_pendown_state, + .keep_vref_on = 1, ++ .settle_delay_usecs = 150, + }; + + static struct omap2_mcspi_device_config ads7846_mcspi_config = { + diff --git a/meta/packages/linux/linux-omap-2.6.29/usbttyfix.patch b/meta/packages/linux/linux-omap-2.6.29/usbttyfix.patch new file mode 100644 index 000000000..997705a31 --- /dev/null +++ b/meta/packages/linux/linux-omap-2.6.29/usbttyfix.patch @@ -0,0 +1,29 @@ +To get USB HOST mode working on USB OTG Port with USB TTY enabled U-boot + +Signed-off-by: Syed Mohammed Khasim +--- +--- linux-2.6.git/drivers/usb/musb/omap2430.c 2009-01-19 22:42:18.000000000 +0530 ++++ linux-2.6.git/drivers/usb/musb/omap2430.c 2009-02-19 12:45:22.000000000 +0530 +@@ -33,6 +33,7 @@ + #include + #include + #include ++#include + + #include + #include +@@ -233,6 +234,14 @@ int __init musb_platform_init(struct mus + omap_cfg_reg(AE5_2430_USB0HS_STP); + #endif + ++ /* Reset MUSB Controller */ ++ omap_writel(SOFTRST,OTG_SYSCONFIG); ++ ++#if defined(CONFIG_TWL4030_USB) ++ /* Reset the TWL USB PHY */ ++ twl4030_i2c_write_u8(TWL4030_MODULE_USB, 0x60, 0x4); ++#endif ++ + musb->xceiv = *x; + musb_platform_resume(musb); + diff --git a/meta/packages/linux/linux-omap_2.6.29.bb b/meta/packages/linux/linux-omap_2.6.29.bb new file mode 100644 index 000000000..f0769f855 --- /dev/null +++ b/meta/packages/linux/linux-omap_2.6.29.bb @@ -0,0 +1,159 @@ +require linux.inc + +DESCRIPTION = "Linux kernel for OMAP processors" +KERNEL_IMAGETYPE = "uImage" + +COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard|omap3evm|omap3-pandora|overo|omapzoom" + +DEFAULT_PREFERENCE = "-1" +DEFAULT_PREFERENCE_overo = "1" +DEFAULT_PREFERENCE_beagleboard = "1" + +SRCREV = "58cf2f1425abfd3a449f9fe985e48be2d2555022" + +# The main PR is now using MACHINE_KERNEL_PR, for omap3 see conf/machine/include/omap3.inc +PR_append = "+gitr${SRCREV}" + +SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git;protocol=git \ + file://defconfig" + +SRC_URI_append = " \ + file://no-empty-flash-warnings.patch;patch=1 \ + file://no-cortex-deadlock.patch;patch=1 \ + file://read_die_ids.patch;patch=1 \ + file://fix-install.patch;patch=1 \ + file://dss2/0001-Revert-gro-Fix-legacy-path-napi_complete-crash.patch;patch=1 \ + file://dss2/0002-OMAPFB-move-omapfb.h-to-include-linux.patch;patch=1 \ + file://dss2/0003-DSS2-OMAP2-3-Display-Subsystem-driver.patch;patch=1 \ + file://dss2/0004-DSS2-OMAP-framebuffer-driver.patch;patch=1 \ + file://dss2/0005-DSS2-Add-panel-drivers.patch;patch=1 \ + file://dss2/0006-DSS2-HACK-Add-DSS2-support-for-N800.patch;patch=1 \ + file://dss2/0007-DSS2-Add-DSS2-support-for-SDP-Beagle-Overo-EVM.patch;patch=1 \ + file://dss2/0008-DSS2-Add-function-to-display-object-to-get-the-back.patch;patch=1 \ + file://dss2/0009-DSS2-Add-acx565akm-panel.patch;patch=1 \ + file://dss2/0010-DSS2-Small-VRFB-context-allocation-bug-fixed.patch;patch=1 \ + file://dss2/0011-DSS2-Allocated-memory-for-Color-Look-up-table.patch;patch=1 \ + file://dss2/0012-DSS2-Fix-DMA-rotation.patch;patch=1 \ + file://dss2/0013-DSS2-Verify-that-overlay-paddr-0.patch;patch=1 \ + file://dss2/0014-DSS2-Add-function-to-get-DSS-logic-clock-rate.patch;patch=1 \ + file://dss2/0015-DSS2-DSI-calculate-VP_CLK_RATIO-properly.patch;patch=1 \ + file://dss2/0016-DSS2-DSI-improve-packet-len-calculation.patch;patch=1 \ + file://dss2/0017-DSS2-Disable-video-planes-on-sync-lost-error.patch;patch=1 \ + file://dss2/0018-DSS2-check-for-ovl-paddr-only-when-enabling.patch;patch=1 \ + file://dss2/0019-DSS2-Check-fclk-limits-when-configuring-video-plane.patch;patch=1 \ + file://dss2/0020-DSS2-Check-scaling-limits-against-proper-values.patch;patch=1 \ + file://dss2/0021-DSS2-Add-venc-register-dump.patch;patch=1 \ + file://dss2/0022-DSS2-FB-remove-unused-var-warning.patch;patch=1 \ + file://dss2/0023-DSS2-pass-the-default-FB-color-format-through-board.patch;patch=1 \ + file://dss2/0024-DSS2-Beagle-Use-gpio_set_value.patch;patch=1 \ + file://dss2/0025-DSS2-VRFB-Macro-for-calculating-base-address-of-th.patch;patch=1 \ + file://dss2/0026-DSS2-DSI-sidlemode-to-noidle-while-sending-frame.patch;patch=1 \ + file://dss2/0027-DSS2-VRFB-rotation-and-mirroring-implemented.patch;patch=1 \ + file://dss2/0028-DSS2-OMAPFB-Added-support-for-the-YUV-VRFB-rotatio.patch;patch=1 \ + file://dss2/0029-DSS2-OMAPFB-Set-line_length-correctly-for-YUV-with.patch;patch=1 \ + file://dss2/0030-DSS2-dispc_get_trans_key-was-returning-wrong-key-ty.patch;patch=1 \ + file://dss2/0031-DSS2-do-bootmem-reserve-for-exclusive-access.patch;patch=1 \ + file://dss2/0032-DSS2-Fix-DISPC_VID_FIR-value-for-omap34xx.patch;patch=1 \ + file://dss2/0033-DSS2-Prefer-3-tap-filter.patch;patch=1 \ + file://dss2/0034-DSS2-VRAM-improve-omap_vram_add_region.patch;patch=1 \ + file://dss2/0035-DSS2-Added-the-function-pointer-for-getting-default.patch;patch=1 \ + file://dss2/0036-DSS2-Added-support-for-setting-and-querying-alpha-b.patch;patch=1 \ + file://dss2/0037-DSS2-Added-support-for-querying-color-keying.patch;patch=1 \ + file://dss2/0038-DSS2-OMAPFB-Some-color-keying-pointerd-renamed-in-D.patch;patch=1 \ + file://dss2/0039-DSS2-Add-sysfs-entry-to-for-the-alpha-blending-supp.patch;patch=1 \ + file://dss2/0040-DSS2-Provided-proper-exclusion-for-destination-colo.patch;patch=1 \ + file://dss2/0041-DSS2-Disable-vertical-offset-with-fieldmode.patch;patch=1 \ + file://dss2/0042-DSS2-Don-t-enable-fieldmode-automatically.patch;patch=1 \ + file://dss2/0043-DSS2-Swap-field-0-and-field-1-registers.patch;patch=1 \ + file://dss2/0044-DSS2-add-sysfs-entry-for-seting-the-rotate-type.patch;patch=1 \ + file://dss2/0045-DSS2-Fixed-line-endings-from-to.patch;patch=1 \ + file://dss2/0046-DSS2-DSI-decrease-sync-timeout-from-60s-to-2s.patch;patch=1 \ + file://dss2/0047-DSS2-fix-return-value-for-rotate_type-sysfs-functio.patch;patch=1 \ + file://dss2/0048-OMAP2-3-DMA-implement-trans-copy-and-const-fill.patch;patch=1 \ + file://dss2/0049-DSS2-VRAM-clear-allocated-area-with-DMA.patch;patch=1 \ + file://dss2/0050-DSS2-OMAPFB-remove-fb-clearing-code.patch;patch=1 \ + file://dss2/0051-DSS2-VRAM-use-debugfs-not-procfs.patch;patch=1 \ + file://dss2/0052-DSS2-VRAM-fix-section-mismatch-warning.patch;patch=1 \ + file://dss2/0053-DSS2-disable-LCD-DIGIT-before-resetting-DSS.patch;patch=1 \ + file://0001-board-ldp-add-regulator-info-to-get-the-microSD-slo.patch;patch=1 \ + file://fix-unaligned-access.diff;patch=1 \ + file://make-alignment-visible.diff;patch=1 \ + file://mmctiming.patch;patch=1 \ + file://ehci.patch;patch=1 \ + file://fix-audio-capture.patch;patch=1 \ + file://ads7846-detection.patch;patch=1 \ + file://musb/0001-USB-musb-only-turn-off-vbus-in-OTG-hosts.patch;patch=1 \ + file://musb/0002-USB-composite-avoid-inconsistent-lock-state.patch;patch=1 \ + file://musb/0003-USB-musb-NAK-timeout-scheme-on-bulk-RX-endpoint.patch;patch=1 \ + file://musb/0004-USB-musb-rewrite-host-periodic-endpoint-allocation.patch;patch=1 \ + file://musb/0005-USB-TWL-disable-VUSB-regulators-when-cable-unplugg.patch;patch=1 \ + file://musb/0006-USB-gadget-composite-device-level-suspend-resume-h.patch;patch=1 \ + file://musb/0007-usb-gadget-fix-ethernet-link-reports-to-ethtool.patch;patch=1 \ + file://musb/0008-usb-musb_host-minor-enqueue-locking-fix-v2.patch;patch=1 \ + file://musb/0009-usb-musb_host-fix-ep0-fifo-flushing.patch;patch=1 \ + file://musb/0010-musb-sanitize-clearing-TXCSR-DMA-bits-take-2.patch;patch=1 \ + file://musb/0011-musb-fix-isochronous-TXDMA-take-2.patch;patch=1 \ + file://musb/0012-musb-fix-possible-panic-while-resuming.patch;patch=1 \ + file://musb/0013-musb_host-refactor-musb_save_toggle-take-2.patch;patch=1 \ + file://musb/0014-musb_gadget-suppress-parasitic-TX-interrupts-with.patch;patch=1 \ + file://musb/0015-musb_gadget-fix-unhandled-endpoint-0-IRQs.patch;patch=1 \ + file://musb/0016-musb_host-factor-out-musb_ep_-get-set-_qh.patch;patch=1 \ + file://musb/0017-musb_host-refactor-URB-giveback.patch;patch=1 \ + file://musb/0018-musb-split-out-CPPI-interrupt-handler.patch;patch=1 \ + file://musb/0019-musb_host-simplify-check-for-active-URB.patch;patch=1 \ + file://musb/0020-musb_host-streamline-musb_cleanup_urb-calls.patch;patch=1 \ + file://musb/0021-twl4030-usb-fix-minor-reporting-goofage.patch;patch=1 \ + file://musb/0022-musb-use-dma-mode-1-for-TX-if-transfer-size-equals.patch;patch=1 \ + file://musb/0023-musb-add-high-bandwidth-ISO-support.patch;patch=1 \ + file://musb/0024-USB-otg-adding-nop-usb-transceiver.patch;patch=1 \ + file://musb/0025-nop-usb-xceiv-behave-when-linked-as-a-module.patch;patch=1 \ + file://musb/0026-musb-proper-hookup-to-transceiver-drivers.patch;patch=1 \ + file://musb/0027-musb-otg-timer-cleanup.patch;patch=1 \ + file://musb/0028-musb-make-initial-HNP-roleswitch-work-v2.patch;patch=1 \ + file://musb/0029-musb-support-disconnect-after-HNP-roleswitch.patch;patch=1 \ + file://isp/v4l/0001-V4L2-Add-COLORFX-user-control.patch;patch=1 \ + file://isp/v4l/0002-V4L-Int-if-v4l2_int_device_try_attach_all-requires.patch;patch=1 \ + file://isp/v4l/0003-V4L-Int-if-Dummy-slave.patch;patch=1 \ + file://isp/v4l/0004-V4L-int-device-add-support-for-VIDIOC_QUERYMENU.patch;patch=1 \ + file://isp/v4l/0005-V4L-Int-if-Add-vidioc_int_querycap.patch;patch=1 \ + file://isp/iommu/0001-omap-iommu-tlb-and-pagetable-primitives.patch;patch=1 \ + file://isp/iommu/0002-omap-iommu-omap2-architecture-specific-functions.patch;patch=1 \ + file://isp/iommu/0003-omap-iommu-omap3-iommu-device-registration.patch;patch=1 \ + file://isp/iommu/0004-omap-iommu-simple-virtual-address-space-management.patch;patch=1 \ + file://isp/iommu/0005-omap-iommu-entries-for-Kconfig-and-Makefile.patch;patch=1 \ + file://isp/iommu/0006-omap-iommu-Don-t-try-BUG_ON-in_interrupt.patch;patch=1 \ + file://isp/iommu/0007-omap-iommu-We-support-chained-scatterlists-probabl.patch;patch=1 \ + file://isp/iommu/0008-omap2-iommu-entries-for-Kconfig-and-Makefile.patch;patch=1 \ + file://isp/omap3camera/0001-omap3isp-Add-ISP-main-driver-and-register-definitio.patch;patch=1 \ + file://isp/omap3camera/0002-omap3isp-Add-ISP-MMU-wrapper.patch;patch=1 \ + file://isp/omap3camera/0003-omap3isp-Add-userspace-header.patch;patch=1 \ + file://isp/omap3camera/0004-omap3isp-Add-ISP-frontend-CCDC.patch;patch=1 \ + file://isp/omap3camera/0005-omap3isp-Add-ISP-backend-PRV-and-RSZ.patch;patch=1 \ + file://isp/omap3camera/0006-omap3isp-Add-statistics-collection-modules-H3A-and.patch;patch=1 \ + file://isp/omap3camera/0007-omap3isp-Add-CSI2-interface-support.patch;patch=1 \ + file://isp/omap3camera/0008-omap3isp-Add-ISP-tables.patch;patch=1 \ + file://isp/omap3camera/0009-omap34xxcam-Add-camera-driver.patch;patch=1 \ +# file://isp/base/0001-omap3-Add-base-address-definitions-and-resources-fo.patch;patch=1 \ +# file://isp/standalone/0001-Resizer-and-Previewer-driver-added-to-commit.patch;patch=1 \ +# file://isp/standalone/0002-Resizer-bug-fixes-on-top-of-1.0.2-release.patch;patch=1 \ + file://0124-leds-gpio-broken-with-current-git.patch;patch=1 \ + file://modedb-hd720.patch;patch=1 \ +" + + +SRC_URI_append_beagleboard = " file://logo_linux_clut224.ppm \ + file://beagle-asoc.patch;patch=1 \ +" + +SRC_URI_append_omap3evm = " \ + file://evm-mcspi-ts.diff;patch=1 \ +" + + + +S = "${WORKDIR}/git" + + +module_autoload_ohci-hcd_omap5912osk = "ohci-hcd" + + -- cgit v1.2.3