From 51d58201daff8bc499b4a52277e65e185e1880a8 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Thu, 14 Dec 2006 09:20:58 +0000 Subject: Add time git-svn-id: https://svn.o-hand.com/repos/poky/trunk@1031 311d38ba-8fff-0310-9ca6-ca027cbcb966 --- meta/packages/time/files/debian.patch | 1299 +++++++++++++++++++++++++++++++++ meta/packages/time/time.inc | 6 + meta/packages/time/time_1.7.bb | 9 + 3 files changed, 1314 insertions(+) create mode 100644 meta/packages/time/files/debian.patch create mode 100644 meta/packages/time/time.inc create mode 100644 meta/packages/time/time_1.7.bb (limited to 'meta/packages/time') diff --git a/meta/packages/time/files/debian.patch b/meta/packages/time/files/debian.patch new file mode 100644 index 000000000..40df19da4 --- /dev/null +++ b/meta/packages/time/files/debian.patch @@ -0,0 +1,1299 @@ +--- time-1.7.orig/configure.in ++++ time-1.7/configure.in +@@ -1,11 +1,8 @@ + dnl Process this file with autoconf to produce a configure script. + AC_INIT(time.c) +-VERSION=1.7 +-AC_SUBST(VERSION) +-PACKAGE=time +-AC_SUBST(PACKAGE) ++AM_INIT_AUTOMAKE(time, 1.7) + +-AC_ARG_PROGRAM ++AM_MAINTAINER_MODE + + dnl Checks for programs. + AC_PROG_CC +@@ -15,7 +12,7 @@ + dnl Checks for header files. + AC_HEADER_STDC + AC_HEADER_SYS_WAIT +-AC_CHECK_HEADERS(unistd.h string.h sys/rusage.h) ++AC_CHECK_HEADERS(unistd.h string.h sys/rusage.h sys/resource.h) + + dnl Checks for typedefs, structures, and compiler characteristics. + AC_C_CONST +--- time-1.7.orig/version.texi ++++ time-1.7/version.texi +@@ -1,3 +1,3 @@ +-@set UPDATED 12 June 1996 ++@set UPDATED 9 May 2002 + @set EDITION 1.7 + @set VERSION 1.7 +--- time-1.7.orig/time.c ++++ time-1.7/time.c +@@ -147,6 +147,10 @@ + NULL + }; + ++ ++/* If true, do not show the exit message */ ++static boolean quiet; ++ + /* If true, show an English description next to each statistic. */ + static boolean verbose; + +@@ -172,6 +176,7 @@ + {"help", no_argument, NULL, 'h'}, + {"output-file", required_argument, NULL, 'o'}, + {"portability", no_argument, NULL, 'p'}, ++ {"quiet", no_argument,NULL, 'q'}, + {"verbose", no_argument, NULL, 'v'}, + {"version", no_argument, NULL, 'V'}, + {NULL, no_argument, NULL, 0} +@@ -333,7 +338,8 @@ + else if (WIFSIGNALED (resp->waitstatus)) + fprintf (fp, "Command terminated by signal %d\n", + WTERMSIG (resp->waitstatus)); +- else if (WIFEXITED (resp->waitstatus) && WEXITSTATUS (resp->waitstatus)) ++ else if (WIFEXITED (resp->waitstatus) && WEXITSTATUS (resp->waitstatus) ++ && !quiet) + fprintf (fp, "Command exited with non-zero status %d\n", + WEXITSTATUS (resp->waitstatus)); + +@@ -523,6 +529,7 @@ + char *format; /* Format found in environment. */ + + /* Initialize the option flags. */ ++ quiet = false; + verbose = false; + outfile = NULL; + outfp = stderr; +@@ -536,7 +543,7 @@ + if (format) + output_format = format; + +- while ((optc = getopt_long (argc, argv, "+af:o:pvV", longopts, (int *) 0)) ++ while ((optc = getopt_long (argc, argv, "+af:o:pqvV", longopts, (int *) 0)) + != EOF) + { + switch (optc) +@@ -555,6 +562,9 @@ + case 'p': + output_format = posix_format; + break; ++ case 'q': ++ quiet = true; ++ break; + case 'v': + verbose = true; + break; +@@ -642,9 +652,9 @@ + fflush (outfp); + + if (WIFSTOPPED (res.waitstatus)) +- exit (WSTOPSIG (res.waitstatus)); ++ exit (WSTOPSIG (res.waitstatus) + 128); + else if (WIFSIGNALED (res.waitstatus)) +- exit (WTERMSIG (res.waitstatus)); ++ exit (WTERMSIG (res.waitstatus) + 128); + else if (WIFEXITED (res.waitstatus)) + exit (WEXITSTATUS (res.waitstatus)); + } +@@ -657,7 +667,7 @@ + fprintf (stream, "\ + Usage: %s [-apvV] [-f format] [-o file] [--append] [--verbose]\n\ + [--portability] [--format=format] [--output=file] [--version]\n\ +- [--help] command [arg...]\n", ++ [--quiet] [--help] command [arg...]\n", + program_name); + exit (status); + } +--- time-1.7.orig/resuse.h ++++ time-1.7/resuse.h +@@ -36,19 +36,8 @@ + # include + #else + # define TV_MSEC tv_usec / 1000 +-# if HAVE_WAIT3 ++# if HAVE_SYS_RESOURCE_H + # include +-# else +-/* Process resource usage structure. */ +-struct rusage +-{ +- struct timeval ru_utime; /* User time used. */ +- struct timeval ru_stime; /* System time used. */ +- int ru_maxrss, ru_ixrss, ru_idrss, ru_isrss, +- ru_minflt, ru_majflt, ru_nswap, ru_inblock, +- ru_oublock, ru_msgsnd, ru_msgrcv, ru_nsignals, +- ru_nvcsw, ru_nivcsw; +-}; + # endif + #endif + +--- time-1.7.orig/time.texi ++++ time-1.7/time.texi +@@ -11,6 +11,12 @@ + @finalout + @end iftex + ++@dircategory Individual utilities ++@direntry ++* time: (time). Run programs and summarize ++ system resource usage. ++@end direntry ++ + @ifinfo + This file documents the the GNU @code{time} command for running programs + and summarizing the system resources they use. +@@ -185,6 +191,10 @@ + sys %S + @end example + ++@item -q ++@itemx --quiet ++Suppress non-zero error code from the executed program. ++ + @item -v + @itemx --verbose + @cindex format +--- time-1.7.orig/time.info ++++ time-1.7/time.info +@@ -1,5 +1,10 @@ +-This is Info file ./time.info, produced by Makeinfo-1.55 from the input +-file time.texi. ++This is time.info, produced by makeinfo version 4.1 from time.texi. ++ ++INFO-DIR-SECTION Individual utilities ++START-INFO-DIR-ENTRY ++* time: (time). Run programs and summarize ++ system resource usage. ++END-INFO-DIR-ENTRY + + This file documents the the GNU `time' command for running programs + and summarizing the system resources they use. +@@ -31,7 +36,7 @@ + + * Resource Measurement:: Measuring program resource use. + +- -- The Detailed Node Listing -- ++ --- The Detailed Node Listing --- + + Measuring Program Resource Use + +@@ -58,14 +63,14 @@ + The `time' command runs another program, then displays information + about the resources used by that program, collected by the system while + the program was running. You can select which information is reported +-and the format in which it is shown (*note Setting Format::.), or have ++and the format in which it is shown (*note Setting Format::), or have + `time' save the information in a file instead of displaying it on the +-screen (*note Redirecting::.). ++screen (*note Redirecting::). + + The resources that `time' can report on fall into the general + categories of time, memory, and I/O and IPC calls. Some systems do not + provide much information about program resource use; `time' reports +-unavailable information as zero values (*note Accuracy::.). ++unavailable information as zero values (*note Accuracy::). + + The format of the `time' command is: + +@@ -132,6 +137,10 @@ + user %U + sys %S + ++`-q' ++`--quiet' ++ Suppress non-zero error code from the executed program. ++ + `-v' + `--verbose' + Use the built-in verbose format, which displays each available +@@ -174,7 +183,7 @@ + The resource specifiers, which are a superset of those recognized by + the `tcsh' builtin `time' command, are listed below. Not all resources + are measured by all versions of Unix, so some of the values might be +-reported as zero (*note Accuracy::.). ++reported as zero (*note Accuracy::). + + * Menu: + +@@ -308,11 +317,11 @@ + `-o FILE' + `--output=FILE' + Write the resource use statistics to FILE. By default, this +- *overwrites* the file, destroying the file's previous contents. ++ _overwrites_ the file, destroying the file's previous contents. + + `-a' + `--append' +- *Append* the resource use information to the output file instead ++ _Append_ the resource use information to the output file instead + of overwriting it. This option is only useful with the `-o' or + `--output' option. + +@@ -437,7 +446,7 @@ + + `-a' + `--append' +- *Append* the resource use information to the output file instead ++ _Append_ the resource use information to the output file instead + of overwriting it. + + `-f FORMAT' +@@ -462,17 +471,17 @@ + +  + Tag Table: +-Node: Top934 +-Node: Resource Measurement1725 +-Node: Setting Format3678 +-Node: Format String4907 +-Node: Time Resources6214 +-Node: Memory Resources6844 +-Node: I/O Resources7549 +-Node: Command Info8747 +-Node: Redirecting8964 +-Node: Examples9754 +-Node: Accuracy12064 +-Node: Invoking time13586 ++Node: Top1115 ++Node: Resource Measurement1908 ++Node: Setting Format3858 ++Node: Format String5164 ++Node: Time Resources6470 ++Node: Memory Resources7100 ++Node: I/O Resources7805 ++Node: Command Info9003 ++Node: Redirecting9220 ++Node: Examples10010 ++Node: Accuracy12320 ++Node: Invoking time13842 +  + End Tag Table +--- time-1.7.orig/time.html ++++ time-1.7/time.html +@@ -0,0 +1,1021 @@ ++ ++ ++ ++ ++ ++Measuring Program Resource Use ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
[Top][Contents][Index][ ? ]
++

Measuring Program Resource Use

++ ++

++ ++This file documents the the GNU time command for running programs ++and summarizing the system resources they use. ++This is edition 1.7, for version 1.7. ++

++

++ ++

++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
1. Measuring Program Resource Use  Measuring program resource use.
++
-- The Detailed Node Listing --- ++
++
Measuring Program Resource Use ++
++
1.1 Setting the Output Format  Selecting the information reported by time.
1.2 The Format String  The information time can report.
1.3 Redirecting Output  Writing the information to a file.
1.4 Examples  Examples of using time.
1.5 Accuracy  Limitations on the accuracy of time output.
1.6 Running the time Command  Summary of the options to the time command.
++
The Format String ++
++
1.2.1 Time Resources  
1.2.2 Memory Resources  
1.2.3 I/O Resources  
1.2.4 Command Info  
++

++ ++

++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
[ < ][ > ]   [ << ][ Up ][ >> ]         [Top][Contents][Index][ ? ]
++ ++

1. Measuring Program Resource Use

++ ++

++ ++The time command runs another program, then displays information ++about the resources used by that program, collected by the system while ++the program was running. You can select which information is reported ++and the format in which it is shown (see section 1.1 Setting the Output Format), or have ++time save the information in a file instead of displaying it on the ++screen (see section 1.3 Redirecting Output). ++

++

++ ++The resources that time can report on fall into the general ++categories of time, memory, and I/O and IPC calls. Some systems do not ++provide much information about program resource use; time ++reports unavailable information as zero values (see section 1.5 Accuracy). ++

++

++ ++The format of the time command is: ++

++

++ ++
 
time [option...] command [arg...]
++

++ ++ ++time runs the program command, with any given arguments ++arg.... When command finishes, time displays ++information about resources used by command. ++

++

++ ++Here is an example of using time to measure the time and other ++resources used by running the program grep: ++

++

++ ++
 
eg$ time grep nobody /etc/aliases
++nobody:/dev/null
++etc-files:nobody
++misc-group:nobody
++0.07user 0.50system 0:06.69elapsed 8%CPU (0avgtext+489avgdata 324maxresident)k
++46inputs+7outputs (43major+251minor)pagefaults 0swaps
++

++ ++Mail suggestions and bug reports for GNU time to ++bug-gnu-utils@prep.ai.mit.edu. Please include the version of ++time, which you can get by running `time --version', and the ++operating system and C compiler you used. ++

++

++ ++ ++ ++ ++ ++ ++ ++ ++
1.1 Setting the Output Format  Selecting the information reported by time.
1.2 The Format String  The information time can report.
1.3 Redirecting Output  Writing the information to a file.
1.4 Examples  Examples of using time.
1.5 Accuracy  Limitations on the accuracy of time output.
1.6 Running the time Command  Summary of the options to the time command.
++

++ ++ ++

++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
[ < ][ > ]   [ << ][ Up ][ >> ]         [Top][Contents][Index][ ? ]
++

1.1 Setting the Output Format

++ ++

++ ++time uses a format string to determine which information to ++display about the resources used by the command it runs. See section 1.2 The Format String, for the interpretation of the format string contents. ++

++

++ ++You can specify a format string with the command line options listed ++below. If no format is specified on the command line, but the ++TIME environment variable is set, its value is used as the format ++string. Otherwise, the default format built into time is used: ++

++

++ ++
 
%Uuser %Ssystem %Eelapsed %PCPU (%Xtext+%Ddata %Mmax)k
++%Iinputs+%Ooutputs (%Fmajor+%Rminor)pagefaults %Wswaps
++

++ ++The command line options to set the format are: ++

++

++ ++

++
++
-f format ++
--format=format ++
Use format as the format string. ++

++ ++

++
-p ++
--portability ++
Use the following format string, for conformance with POSIX standard ++1003.2: ++

++ ++
 
real %e
++user %U
++sys %S
++

++ ++

++
-q ++
--quiet ++
Suppress non-zero error code from the executed program. ++

++ ++

++
-v ++
--verbose ++
++Use the built-in verbose format, which displays each available piece of ++information on the program's resource use on its own line, with an ++English description of its meaning. ++
++

++ ++ ++

++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
[ < ][ > ]   [ << ][ Up ][ >> ]         [Top][Contents][Index][ ? ]
++

1.2 The Format String

++ ++

++ ++ ++ ++The format string controls the contents of the time output. ++It consists of resource specifiers and escapes, interspersed ++with plain text. ++

++

++ ++A backslash introduces an escape, which is translated ++into a single printing character upon output. The valid escapes are ++listed below. An invalid escape is output as a question mark followed ++by a backslash. ++

++

++ ++

++
++
\t ++
a tab character ++

++ ++

++
\n ++
a newline ++

++ ++

++
\\ ++
a literal backslash ++
++

++ ++time always prints a newline after printing the resource use ++information, so normally format strings do not end with a newline ++character (or `\n'). ++

++

++ ++A resource specifier consists of a percent sign followed by another ++character. An invalid resource specifier is output as a question mark ++followed by the invalid character. Use `%%' to output a literal ++percent sign. ++

++

++ ++The resource specifiers, which are a superset of those recognized by the ++tcsh builtin time command, are listed below. Not all ++resources are measured by all versions of Unix, so some of the values ++might be reported as zero (see section 1.5 Accuracy). ++

++

++ ++ ++ ++ ++ ++ ++
1.2.1 Time Resources  
1.2.2 Memory Resources  
1.2.3 I/O Resources  
1.2.4 Command Info  
++

++ ++ ++

++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
[ < ][ > ]   [ << ][ Up ][ >> ]         [Top][Contents][Index][ ? ]
++

1.2.1 Time Resources

++ ++

++ ++

++
++
E ++
Elapsed real (wall clock) time used by the process, in ++[hours:]minutes:seconds. ++

++ ++

++
e ++
Elapsed real (wall clock) time used by the process, in ++seconds. ++

++ ++

++
S ++
Total number of CPU-seconds used by the system on behalf of the process ++(in kernel mode), in seconds. ++

++ ++

++
U ++
Total number of CPU-seconds that the process used directly (in user ++mode), in seconds. ++

++ ++

++
P ++
Percentage of the CPU that this job got. This is just user + system ++times divied by the total running time. ++
++

++ ++ ++

++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
[ < ][ > ]   [ << ][ Up ][ >> ]         [Top][Contents][Index][ ? ]
++

1.2.2 Memory Resources

++ ++

++ ++

++
++
M ++
Maximum resident set size of the process during its lifetime, in ++Kilobytes. ++

++ ++

++
t ++
Average resident set size of the process, in Kilobytes. ++

++ ++

++
K ++
Average total (data+stack+text) memory use of the process, in Kilobytes. ++

++ ++

++
D ++
Average size of the process's unshared data area, in Kilobytes. ++

++ ++

++
p ++
Average size of the process's unshared stack, in Kilobytes. ++

++ ++

++
X ++
Average size of the process's shared text, in Kilobytes. ++

++ ++

++
Z ++
System's page size, in bytes. This is a per-system constant, but ++varies between systems. ++
++

++ ++ ++

++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
[ < ][ > ]   [ << ][ Up ][ >> ]         [Top][Contents][Index][ ? ]
++

1.2.3 I/O Resources

++ ++

++ ++

++
++
F ++
Number of major, or I/O-requiring, page faults that occurred while the ++process was running. These are faults where the page has actually ++migrated out of primary memory. ++

++ ++

++
R ++
Number of minor, or recoverable, page faults. These are pages that are ++not valid (so they fault) but which have not yet been claimed by other ++virtual pages. Thus the data in the page is still valid but the system ++tables must be updated. ++

++ ++

++
W ++
Number of times the process was swapped out of main memory. ++

++ ++

++
c ++
Number of times the process was context-switched involuntarily (because ++the time slice expired). ++

++ ++

++
w ++
Number of times that the program was context-switched voluntarily, for ++instance while waiting for an I/O operation to complete. ++

++ ++

++
I ++
Number of file system inputs by the process. ++

++ ++

++
O ++
Number of file system outputs by the process. ++

++ ++

++
r ++
Number of socket messages received by the process. ++

++ ++

++
s ++
Number of socket messages sent by the process. ++

++ ++

++
k ++
Number of signals delivered to the process. ++
++

++ ++ ++

++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
[ < ][ > ]   [ << ][ Up ][ >> ]         [Top][Contents][Index][ ? ]
++

1.2.4 Command Info

++ ++

++ ++

++
++
C ++
Name and command line arguments of the command being timed. ++

++ ++

++
x ++
Exit status of the command. ++
++

++ ++ ++

++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
[ < ][ > ]   [ << ][ Up ][ >> ]         [Top][Contents][Index][ ? ]
++

1.3 Redirecting Output

++ ++

++ ++By default, time writes the resource use statistics to the ++standard error stream. The options below make it write the statistics ++to a file instead. Doing this can be useful if the program you're ++running writes to the standard error or you're running time ++noninteractively or in the background. ++

++

++ ++

++
++
-o file ++
--output=file ++
Write the resource use statistics to file. By default, this ++overwrites the file, destroying the file's previous contents. ++

++ ++

++
-a ++
--append ++
Append the resource use information to the output file instead ++of overwriting it. This option is only useful with the `-o' or ++`--output' option. ++
++

++ ++ ++

++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
[ < ][ > ]   [ << ][ Up ][ >> ]         [Top][Contents][Index][ ? ]
++

1.4 Examples

++ ++

++ ++Run the command `wc /etc/hosts' and show the default information: ++

++

++ ++
 
eg$ time wc /etc/hosts
++      35     111    1134 /etc/hosts
++0.00user 0.01system 0:00.04elapsed 25%CPU (0avgtext+0avgdata 0maxresident)k
++1inputs+1outputs (0major+0minor)pagefaults 0swaps
++

++ ++Run the command `ls -Fs' and show just the user, system, and ++wall-clock time: ++

++

++ ++
 
eg$ time -f "\t%E real,\t%U user,\t%S sys" ls -Fs
++total 16
++1 account/      1 db/           1 mail/         1 run/
++1 backups/      1 emacs/        1 msgs/         1 rwho/
++1 crash/        1 games/        1 preserve/     1 spool/
++1 cron/         1 log/          1 quotas/       1 tmp/
++        0:00.03 real,   0.00 user,      0.01 sys
++

++ ++Edit the file `.bashrc' and have time append the elapsed time ++and number of signals to the file `log', reading the format string ++from the environment variable TIME: ++

++

++ ++
 
eg$ export TIME="\t%E,\t%k" # If using bash or ksh
++eg$ setenv TIME "\t%E,\t%k" # If using csh or tcsh
++eg$ time -a -o log emacs .bashrc
++eg$ cat log
++        0:16.55,        726
++

++ ++Run the command `sleep 4' and show all of the information about it ++verbosely: ++

++

++ ++
 
eg$ time -v sleep 4
++        Command being timed: "sleep 4"
++        User time (seconds): 0.00
++        System time (seconds): 0.05
++        Percent of CPU this job got: 1%
++        Elapsed (wall clock) time (h:mm:ss or m:ss): 0:04.26
++        Average shared text size (kbytes): 36
++        Average unshared data size (kbytes): 24
++        Average stack size (kbytes): 0
++        Average total size (kbytes): 60
++        Maximum resident set size (kbytes): 32
++        Average resident set size (kbytes): 24
++        Major (requiring I/O) page faults: 3
++        Minor (reclaiming a frame) page faults: 0
++        Voluntary context switches: 11
++        Involuntary context switches: 0
++        Swaps: 0
++        File system inputs: 3
++        File system outputs: 1
++        Socket messages sent: 0
++        Socket messages received: 0
++        Signals delivered: 1
++        Page size (bytes): 4096
++        Exit status: 0
++

++ ++ ++

++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
[ < ][ > ]   [ << ][ Up ][ >> ]         [Top][Contents][Index][ ? ]
++

1.5 Accuracy

++ ++

++ ++The elapsed time is not collected atomically with the execution of the ++program; as a result, in bizarre circumstances (if the time ++command gets stopped or swapped out in between when the program being ++timed exits and when time calculates how long it took to run), it ++could be much larger than the actual execution time. ++

++

++ ++When the running time of a command is very nearly zero, some values ++(e.g., the percentage of CPU used) may be reported as either zero (which ++is wrong) or a question mark. ++

++

++ ++Most information shown by time is derived from the wait3 ++system call. The numbers are only as good as those returned by ++wait3. Many systems do not measure all of the resources that ++time can report on; those resources are reported as zero. The ++systems that measure most or all of the resources are based on 4.2 or ++4.3BSD. Later BSD releases use different memory management code that ++measures fewer resources. ++

++

++ ++On systems that do not have a wait3 call that returns status ++information, the times system call is used instead. It provides ++much less information than wait3, so on those systems time ++reports most of the resources as zero. ++

++

++ ++The `%I' and `%O' values are allegedly only "real" input ++and output and do not include those supplied by caching devices. The ++meaning of "real" I/O reported by `%I' and `%O' may be ++muddled for workstations, especially diskless ones. ++

++

++ ++ ++

++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
[ < ][ > ]   [ << ][ Up ][ >> ]         [Top][Contents][Index][ ? ]
++

1.6 Running the time Command

++ ++

++ ++The format of the time command is: ++

++

++ ++
 
time [option...] command [arg...]
++

++ ++ ++time runs the program command, with any given arguments ++arg.... When command finishes, time displays ++information about resources used by command (on the standard error ++output, by default). If command exits with non-zero status or is ++terminated by a signal, time displays a warning message and the ++exit status or signal number. ++

++

++ ++Options to time must appear on the command line before ++command. Anything on the command line after command is ++passed as arguments to command. ++

++

++ ++

++
++
-o file ++
--output=file ++
Write the resource use statistics to file. ++

++ ++

++
-a ++
--append ++
Append the resource use information to the output file instead ++of overwriting it. ++

++ ++

++
-f format ++
--format=format ++
Use format as the format string. ++

++ ++

++
--help ++
Print a summary of the command line options to time and exit. ++

++ ++

++
-p ++
--portability ++
Use the POSIX format. ++

++ ++

++
-v ++
--verbose ++
++Use the built-in verbose format. ++

++ ++

++
-V ++
--version ++
++Print the version number of time and exit. ++
++

++ ++

++ ++ ++ ++ ++ ++ ++
[Top][Contents][Index][ ? ]
++

Table of Contents

++
++1. Measuring Program Resource Use ++
++
++1.1 Setting the Output Format ++
++1.2 The Format String ++
++
++1.2.1 Time Resources ++
++1.2.2 Memory Resources ++
++1.2.3 I/O Resources ++
++1.2.4 Command Info ++
++
++1.3 Redirecting Output ++
++1.4 Examples ++
++1.5 Accuracy ++
++1.6 Running the time Command ++
++
++
++
++ ++ ++ ++ ++ ++ ++
[Top][Contents][Index][ ? ]
++

Short Table of Contents

++
++1. Measuring Program Resource Use ++
++ ++
++
++ ++ ++ ++ ++ ++ ++
[Top][Contents][Index][ ? ]
++

About this document

++This document was generated ++by ++using texi2html ++

++The buttons in the navigation panels have the following meaning: ++

++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
Button Name Go to From 1.2.3 go to
++ [ < ] ++Back ++ ++previous section in reading order ++ ++1.2.2 ++
++ [ > ] ++Forward ++ ++next section in reading order ++ ++1.2.4 ++
++ [ << ] ++FastBack ++ ++beginning of this chapter or previous chapter ++ ++1 ++
++ [ Up ] ++Up ++ ++up section ++ ++1.2 ++
++ [ >> ] ++FastForward ++ ++next chapter ++ ++2 ++
++ [Top] ++Top ++ ++cover (top) of document ++ ++   ++
++ [Contents] ++Contents ++ ++table of contents ++ ++   ++
++ [Index] ++Index ++ ++concept index ++ ++   ++
++ [ ? ] ++About ++ ++this page ++ ++   ++
++

++ where the Example assumes that the current position ++ is at Subsubsection One-Two-Three of a document of ++ the following structure:

++
    ++
  • 1. Section One ++
      ++
    • 1.1 Subsection One-One ++
        ++
      • ...
        • ++
      ++
    • 1.2 Subsection One-Two ++
        ++
      • 1.2.1 Subsubsection One-Two-One
        • ++
      • 1.2.2 Subsubsection One-Two-Two
        • ++
      • 1.2.3 Subsubsection One-Two-Three     ++ <== Current Position
        • ++
      • 1.2.4 Subsubsection One-Two-Four
        • ++
      ++
      • ++
    • 1.3 Subsection One-Three ++
        ++
      • ...
        • ++
      ++
      • ++
    • 1.4 Subsection One-Four
      • ++
    ++
    • ++
++ ++
++
++ ++This document was generated ++by root on September, 1 2003 ++using texi2html ++ ++ ++ ++ diff --git a/meta/packages/time/time.inc b/meta/packages/time/time.inc new file mode 100644 index 000000000..81d644675 --- /dev/null +++ b/meta/packages/time/time.inc @@ -0,0 +1,6 @@ +DESCRIPTION = "time measures many of the CPU resources, such as time and \ +memory, that other programs use." +HOMEPAGE = "http://www.gnu.org/software/time/" +LICENSE = "GPL" +MAINTAINER = "Chris Larson " +SECTION = "utils" diff --git a/meta/packages/time/time_1.7.bb b/meta/packages/time/time_1.7.bb new file mode 100644 index 000000000..1030489b6 --- /dev/null +++ b/meta/packages/time/time_1.7.bb @@ -0,0 +1,9 @@ +require time.inc + +SRC_URI = "${GNU_MIRROR}/time/time-${PV}.tar.gz \ + file://debian.patch;patch=1" +# file://autofoo.patch;patch=1 \ +# file://compile.patch;patch=1" +S = "${WORKDIR}/time-${PV}" + +inherit autotools -- cgit v1.2.3