From ad9ae098612856bceb94a7713056f3b061db3848 Mon Sep 17 00:00:00 2001 From: Marcin Juszkiewicz Date: Fri, 19 Oct 2007 12:19:42 +0000 Subject: zlib: cleanup and sync with OE git-svn-id: https://svn.o-hand.com/repos/poky/trunk@2924 311d38ba-8fff-0310-9ca6-ca027cbcb966 --- meta/packages/zlib/zlib-1.2.3/visibility.patch | 1034 ------------------------ 1 file changed, 1034 deletions(-) delete mode 100644 meta/packages/zlib/zlib-1.2.3/visibility.patch (limited to 'meta/packages/zlib/zlib-1.2.3') diff --git a/meta/packages/zlib/zlib-1.2.3/visibility.patch b/meta/packages/zlib/zlib-1.2.3/visibility.patch deleted file mode 100644 index a4e7ae907..000000000 --- a/meta/packages/zlib/zlib-1.2.3/visibility.patch +++ /dev/null @@ -1,1034 +0,0 @@ - -# -# Patch managed by http://www.holgerschurig.de/patcher.html -# - ---- zlib-1.2.3-orig/adler32.c~visibility -+++ zlib-1.2.3-orig/adler32.c -@@ -54,7 +54,7 @@ - #endif - - /* ========================================================================= */ --uLong ZEXPORT adler32(adler, buf, len) -+ZEXPORT uLong adler32(adler, buf, len) - uLong adler; - const Bytef *buf; - uInt len; ---- zlib-1.2.3-orig/compress.c~visibility -+++ zlib-1.2.3-orig/compress.c -@@ -19,7 +19,7 @@ - memory, Z_BUF_ERROR if there was not enough room in the output buffer, - Z_STREAM_ERROR if the level parameter is invalid. - */ --int ZEXPORT compress2 (dest, destLen, source, sourceLen, level) -+ZEXPORT int compress2 (dest, destLen, source, sourceLen, level) - Bytef *dest; - uLongf *destLen; - const Bytef *source; -@@ -59,7 +59,7 @@ - - /* =========================================================================== - */ --int ZEXPORT compress (dest, destLen, source, sourceLen) -+ZEXPORT int compress (dest, destLen, source, sourceLen) - Bytef *dest; - uLongf *destLen; - const Bytef *source; -@@ -72,7 +72,7 @@ - If the default memLevel or windowBits for deflateInit() is changed, then - this function needs to be updated. - */ --uLong ZEXPORT compressBound (sourceLen) -+ZEXPORT uLong compressBound (sourceLen) - uLong sourceLen; - { - return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + 11; ---- zlib-1.2.3-orig/crc32.c~visibility -+++ zlib-1.2.3-orig/crc32.c -@@ -202,7 +202,7 @@ - /* ========================================================================= - * This function can be used by asm versions of crc32() - */ --const unsigned long FAR * ZEXPORT get_crc_table() -+ZEXPORT const unsigned long FAR * get_crc_table() - { - #ifdef DYNAMIC_CRC_TABLE - if (crc_table_empty) -@@ -216,7 +216,7 @@ - #define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1 - - /* ========================================================================= */ --unsigned long ZEXPORT crc32(crc, buf, len) -+ZEXPORT unsigned long crc32(crc, buf, len) - unsigned long crc; - const unsigned char FAR *buf; - unsigned len; ---- zlib-1.2.3-orig/deflate.c~visibility -+++ zlib-1.2.3-orig/deflate.c -@@ -201,7 +201,7 @@ - zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); - - /* ========================================================================= */ --int ZEXPORT deflateInit_(strm, level, version, stream_size) -+ZEXPORT int deflateInit_(strm, level, version, stream_size) - z_streamp strm; - int level; - const char *version; -@@ -213,7 +213,7 @@ - } - - /* ========================================================================= */ --int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, -+ZEXPORT int deflateInit2_(strm, level, method, windowBits, memLevel, strategy, - version, stream_size) - z_streamp strm; - int level; -@@ -312,7 +312,7 @@ - } - - /* ========================================================================= */ --int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength) -+ZEXPORT int deflateSetDictionary (strm, dictionary, dictLength) - z_streamp strm; - const Bytef *dictionary; - uInt dictLength; -@@ -354,7 +354,7 @@ - } - - /* ========================================================================= */ --int ZEXPORT deflateReset (strm) -+ZEXPORT int deflateReset (strm) - z_streamp strm; - { - deflate_state *s; -@@ -401,7 +401,7 @@ - } - - /* ========================================================================= */ --int ZEXPORT deflatePrime (strm, bits, value) -+ZEXPORT int deflatePrime (strm, bits, value) - z_streamp strm; - int bits; - int value; -@@ -413,7 +413,7 @@ - } - - /* ========================================================================= */ --int ZEXPORT deflateParams(strm, level, strategy) -+ZEXPORT int deflateParams(strm, level, strategy) - z_streamp strm; - int level; - int strategy; -@@ -486,7 +486,7 @@ - * But even the conservative upper bound of about 14% expansion does not - * seem onerous for output buffer allocation. - */ --uLong ZEXPORT deflateBound(strm, sourceLen) -+ZEXPORT uLong deflateBound(strm, sourceLen) - z_streamp strm; - uLong sourceLen; - { -@@ -549,7 +549,7 @@ - } - - /* ========================================================================= */ --int ZEXPORT deflate (strm, flush) -+ZEXPORT int deflate (strm, flush) - z_streamp strm; - int flush; - { -@@ -856,7 +856,7 @@ - } - - /* ========================================================================= */ --int ZEXPORT deflateEnd (strm) -+ZEXPORT int deflateEnd (strm) - z_streamp strm; - { - int status; -@@ -891,7 +891,7 @@ - * To simplify the source, this is not supported for 16-bit MSDOS (which - * doesn't have enough memory anyway to duplicate compression states). - */ --int ZEXPORT deflateCopy (dest, source) -+ZEXPORT int deflateCopy (dest, source) - z_streamp dest; - z_streamp source; - { ---- zlib-1.2.3-orig/gzio.c~visibility -+++ zlib-1.2.3-orig/gzio.c -@@ -205,7 +205,7 @@ - /* =========================================================================== - Opens a gzip (.gz) file for reading or writing. - */ --gzFile ZEXPORT gzopen (path, mode) -+ZEXPORT gzFile gzopen (path, mode) - const char *path; - const char *mode; - { -@@ -216,7 +216,7 @@ - Associate a gzFile with the file descriptor fd. fd is not dup'ed here - to mimic the behavio(u)r of fdopen. - */ --gzFile ZEXPORT gzdopen (fd, mode) -+ZEXPORT gzFile gzdopen (fd, mode) - int fd; - const char *mode; - { -@@ -231,7 +231,7 @@ - /* =========================================================================== - * Update the compression level and strategy - */ --int ZEXPORT gzsetparams (file, level, strategy) -+ZEXPORT int gzsetparams (file, level, strategy) - gzFile file; - int level; - int strategy; -@@ -391,7 +391,7 @@ - Reads the given number of uncompressed bytes from the compressed file. - gzread returns the number of bytes actually read (0 for end of file). - */ --int ZEXPORT gzread (file, buf, len) -+ZEXPORT int gzread (file, buf, len) - gzFile file; - voidp buf; - unsigned len; -@@ -500,7 +500,7 @@ - Reads one byte from the compressed file. gzgetc returns this byte - or -1 in case of end of file or error. - */ --int ZEXPORT gzgetc(file) -+ZEXPORT int gzgetc(file) - gzFile file; - { - unsigned char c; -@@ -512,7 +512,7 @@ - /* =========================================================================== - Push one byte back onto the stream. - */ --int ZEXPORT gzungetc(c, file) -+ZEXPORT int gzungetc(c, file) - int c; - gzFile file; - { -@@ -537,7 +537,7 @@ - - The current implementation is not optimized at all. - */ --char * ZEXPORT gzgets(file, buf, len) -+ZEXPORT char * gzgets(file, buf, len) - gzFile file; - char *buf; - int len; -@@ -556,7 +556,7 @@ - Writes the given number of uncompressed bytes into the compressed file. - gzwrite returns the number of bytes actually written (0 in case of error). - */ --int ZEXPORT gzwrite (file, buf, len) -+ZEXPORT int gzwrite (file, buf, len) - gzFile file; - voidpc buf; - unsigned len; -@@ -600,7 +600,7 @@ - #ifdef STDC - #include - --int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...) -+ZEXPORTVA int gzprintf (gzFile file, const char *format, /* args */ ...) - { - char buf[Z_PRINTF_BUFSIZE]; - va_list va; -@@ -634,7 +634,7 @@ - } - #else /* not ANSI C */ - --int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, -+ZEXPORT intVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, - a11, a12, a13, a14, a15, a16, a17, a18, a19, a20) - gzFile file; - const char *format; -@@ -675,7 +675,7 @@ - Writes c, converted to an unsigned char, into the compressed file. - gzputc returns the value that was written, or -1 in case of error. - */ --int ZEXPORT gzputc(file, c) -+ZEXPORT int gzputc(file, c) - gzFile file; - int c; - { -@@ -690,7 +690,7 @@ - the terminating null character. - gzputs returns the number of characters written, or -1 in case of error. - */ --int ZEXPORT gzputs(file, s) -+ZEXPORT int gzputs(file, s) - gzFile file; - const char *s; - { -@@ -743,7 +743,7 @@ - return s->z_err == Z_STREAM_END ? Z_OK : s->z_err; - } - --int ZEXPORT gzflush (file, flush) -+ZEXPORT int gzflush (file, flush) - gzFile file; - int flush; - { -@@ -764,7 +764,7 @@ - SEEK_END is not implemented, returns error. - In this version of the library, gzseek can be extremely slow. - */ --z_off_t ZEXPORT gzseek (file, offset, whence) -+ZEXPORT z_off_t gzseek (file, offset, whence) - gzFile file; - z_off_t offset; - int whence; -@@ -854,7 +854,7 @@ - /* =========================================================================== - Rewinds input file. - */ --int ZEXPORT gzrewind (file) -+ZEXPORT int gzrewind (file) - gzFile file; - { - gz_stream *s = (gz_stream*)file; -@@ -878,7 +878,7 @@ - given compressed file. This position represents a number of bytes in the - uncompressed data stream. - */ --z_off_t ZEXPORT gztell (file) -+ZEXPORT z_off_t gztell (file) - gzFile file; - { - return gzseek(file, 0L, SEEK_CUR); -@@ -888,7 +888,7 @@ - Returns 1 when EOF has previously been detected reading the given - input stream, otherwise zero. - */ --int ZEXPORT gzeof (file) -+ZEXPORT int gzeof (file) - gzFile file; - { - gz_stream *s = (gz_stream*)file; -@@ -950,7 +950,7 @@ - Flushes all pending output if necessary, closes the compressed file - and deallocates all the (de)compression state. - */ --int ZEXPORT gzclose (file) -+ZEXPORT int gzclose (file) - gzFile file; - { - gz_stream *s = (gz_stream*)file; -@@ -984,7 +984,7 @@ - errnum is set to Z_ERRNO and the application may consult errno - to get the exact error code. - */ --const char * ZEXPORT gzerror (file, errnum) -+ZEXPORT const char * gzerror (file, errnum) - gzFile file; - int *errnum; - { -@@ -1014,7 +1014,7 @@ - /* =========================================================================== - Clear the error and end-of-file flags, and do the same for the real file. - */ --void ZEXPORT gzclearerr (file) -+ZEXPORT void gzclearerr (file) - gzFile file; - { - gz_stream *s = (gz_stream*)file; ---- zlib-1.2.3-orig/infback.c~visibility -+++ zlib-1.2.3-orig/infback.c -@@ -25,7 +25,7 @@ - windowBits is in the range 8..15, and window is a user-supplied - window and output buffer that is 2**windowBits bytes. - */ --int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size) -+ZEXPORT int inflateBackInit_(strm, windowBits, window, version, stream_size) - z_streamp strm; - int windowBits; - unsigned char FAR *window; -@@ -238,7 +238,7 @@ - inflateBack() can also return Z_STREAM_ERROR if the input parameters - are not correct, i.e. strm is Z_NULL or the state was not initialized. - */ --int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc) -+ZEXPORT int inflateBack(strm, in, in_desc, out, out_desc) - z_streamp strm; - in_func in; - void FAR *in_desc; -@@ -611,7 +611,7 @@ - return ret; - } - --int ZEXPORT inflateBackEnd(strm) -+ZEXPORT int inflateBackEnd(strm) - z_streamp strm; - { - if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) ---- zlib-1.2.3-orig/inflate.c~visibility -+++ zlib-1.2.3-orig/inflate.c -@@ -100,7 +100,7 @@ - local unsigned syncsearch OF((unsigned FAR *have, unsigned char FAR *buf, - unsigned len)); - --int ZEXPORT inflateReset(strm) -+ZEXPORT int inflateReset(strm) - z_streamp strm; - { - struct inflate_state FAR *state; -@@ -141,7 +141,7 @@ - return Z_OK; - } - --int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size) -+ZEXPORT int inflateInit2_(strm, windowBits, version, stream_size) - z_streamp strm; - int windowBits; - const char *version; -@@ -184,7 +184,7 @@ - return inflateReset(strm); - } - --int ZEXPORT inflateInit_(strm, version, stream_size) -+ZEXPORT int inflateInit_(strm, version, stream_size) - z_streamp strm; - const char *version; - int stream_size; -@@ -551,7 +551,7 @@ - will return Z_BUF_ERROR if it has not reached the end of the stream. - */ - --int ZEXPORT inflate(strm, flush) -+ZEXPORT int inflate(strm, flush) - z_streamp strm; - int flush; - { -@@ -1152,7 +1152,7 @@ - return ret; - } - --int ZEXPORT inflateEnd(strm) -+ZEXPORT int inflateEnd(strm) - z_streamp strm; - { - struct inflate_state FAR *state; -@@ -1166,7 +1166,7 @@ - return Z_OK; - } - --int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength) -+ZEXPORT int inflateSetDictionary(strm, dictionary, dictLength) - z_streamp strm; - const Bytef *dictionary; - uInt dictLength; -@@ -1259,7 +1259,7 @@ - return next; - } - --int ZEXPORT inflateSync(strm) -+ZEXPORT int inflateSync(strm) - z_streamp strm; - { - unsigned len; /* number of bytes to look at or looked at */ -@@ -1310,7 +1310,7 @@ - block. When decompressing, PPP checks that at the end of input packet, - inflate is waiting for these length bytes. - */ --int ZEXPORT inflateSyncPoint(strm) -+ZEXPORT int inflateSyncPoint(strm) - z_streamp strm; - { - struct inflate_state FAR *state; -@@ -1320,7 +1320,7 @@ - return state->mode == STORED && state->bits == 0; - } - --int ZEXPORT inflateCopy(dest, source) -+ZEXPORT int inflateCopy(dest, source) - z_streamp dest; - z_streamp source; - { ---- zlib-1.2.3-orig/uncompr.c~visibility -+++ zlib-1.2.3-orig/uncompr.c -@@ -23,7 +23,7 @@ - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted. - */ --int ZEXPORT uncompress (dest, destLen, source, sourceLen) -+ZEXPORT int uncompress (dest, destLen, source, sourceLen) - Bytef *dest; - uLongf *destLen; - const Bytef *source; ---- zlib-1.2.3-orig/zconf.in.h~visibility -+++ zlib-1.2.3-orig/zconf.in.h -@@ -204,11 +204,9 @@ - */ - # ifdef ZLIB_DLL - # if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) --# ifdef ZLIB_INTERNAL --# define ZEXTERN extern __declspec(dllexport) --# else --# define ZEXTERN extern __declspec(dllimport) --# endif -+# define ZDLLLOCAL __declspec(dllimport) -+# define ZDLLPUBLIC __declspec(dllexport) -+# define ZEXTERN extern - # endif - # endif /* ZLIB_DLL */ - /* If building or using zlib with the WINAPI/WINAPIV calling convention, -@@ -229,30 +227,45 @@ - # define ZEXPORTVA FAR CDECL - # endif - # endif --#endif -- --#if defined (__BEOS__) -+#elif defined (__BEOS__) - # ifdef ZLIB_DLL --# ifdef ZLIB_INTERNAL --# define ZEXPORT __declspec(dllexport) --# define ZEXPORTVA __declspec(dllexport) --# else --# define ZEXPORT __declspec(dllimport) --# define ZEXPORTVA __declspec(dllimport) --# endif -+# define ZDLLIMPORT __declspec(dllimport) -+# define ZDLLPUBLIC __declspec(dllexport) -+# define ZDLLLOCAL -+# endif -+#else -+# define ZDLLIMPORT -+# ifdef GCC_HASCLASSVISIBILITY -+# define ZDLLLOCAL __attribute__ ((visibility("hidden"))) -+# define ZDLLPUBLIC __attribute__ ((visibility("default"))) -+# else -+# define ZDLLLOCAL -+# define ZDLLPUBLIC - # endif - #endif - - #ifndef ZEXTERN - # define ZEXTERN extern - #endif --#ifndef ZEXPORT --# define ZEXPORT --#endif --#ifndef ZEXPORTVA --# define ZEXPORTVA -+#ifdef ZLIB_INTERNAL -+# ifndef ZLIB_DLL -+# define ZEXPORT -+# define ZEXPORTVA -+# endif -+# ifndef ZEXPORT -+# define ZEXPORT ZDLLPUBLIC -+# endif -+# ifndef ZEXPORTVA -+# define ZEXPORTVA ZDLLPUBLIC -+# endif -+#else -+# ifndef ZEXPORT -+# define ZEXPORT ZDLLIMPORT -+# endif -+# ifndef ZEXPORTVA -+# define ZEXPORTVA ZDLLIMPORT -+# endif - #endif -- - #ifndef FAR - # define FAR - #endif ---- zlib-1.2.3-orig/zlib.h~visibility -+++ zlib-1.2.3-orig/zlib.h -@@ -209,7 +209,7 @@ - - /* basic functions */ - --ZEXTERN const char * ZEXPORT zlibVersion OF((void)); -+ZEXTERN ZEXPORT const char * zlibVersion OF((void)); - /* The application can compare zlibVersion and ZLIB_VERSION for consistency. - If the first character differs, the library code actually used is - not compatible with the zlib.h header file used by the application. -@@ -217,7 +217,7 @@ - */ - - /* --ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); -+ZEXTERN ZEXPORT int deflateInit OF((z_streamp strm, int level)); - - Initializes the internal stream state for compression. The fields - zalloc, zfree and opaque must be initialized before by the caller. -@@ -239,7 +239,7 @@ - */ - - --ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); -+ZEXTERN ZEXPORT int deflate OF((z_streamp strm, int flush)); - /* - deflate compresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce some -@@ -325,7 +325,7 @@ - */ - - --ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); -+ZEXTERN ZEXPORT int deflateEnd OF((z_streamp strm)); - /* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any -@@ -340,7 +340,7 @@ - - - /* --ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); -+ZEXTERN ZEXPORT int inflateInit OF((z_streamp strm)); - - Initializes the internal stream state for decompression. The fields - next_in, avail_in, zalloc, zfree and opaque must be initialized before by -@@ -360,7 +360,7 @@ - */ - - --ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); -+ZEXTERN ZEXPORT int inflate OF((z_streamp strm, int flush)); - /* - inflate decompresses as much data as possible, and stops when the input - buffer becomes empty or the output buffer becomes full. It may introduce -@@ -459,7 +459,7 @@ - */ - - --ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); -+ZEXTERN ZEXPORT int inflateEnd OF((z_streamp strm)); - /* - All dynamically allocated data structures for this stream are freed. - This function discards any unprocessed input and does not flush any -@@ -477,7 +477,7 @@ - */ - - /* --ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, -+ZEXTERN ZEXPORT int deflateInit2 OF((z_streamp strm, - int level, - int method, - int windowBits, -@@ -535,7 +535,7 @@ - not perform any compression: this will be done by deflate(). - */ - --ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, -+ZEXTERN ZEXPORT int deflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); - /* -@@ -574,7 +574,7 @@ - perform any compression: this will be done by deflate(). - */ - --ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, -+ZEXTERN ZEXPORT int deflateCopy OF((z_streamp dest, - z_streamp source)); - /* - Sets the destination stream as a complete copy of the source stream. -@@ -592,7 +592,7 @@ - destination. - */ - --ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); -+ZEXTERN ZEXPORT int deflateReset OF((z_streamp strm)); - /* - This function is equivalent to deflateEnd followed by deflateInit, - but does not free and reallocate all the internal compression state. -@@ -603,7 +603,7 @@ - stream state was inconsistent (such as zalloc or state being NULL). - */ - --ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, -+ZEXTERN ZEXPORT int deflateParams OF((z_streamp strm, - int level, - int strategy)); - /* -@@ -641,7 +641,7 @@ - returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. - */ - --ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, -+ZEXTERN ZEXPORT uLong deflateBound OF((z_streamp strm, - uLong sourceLen)); - /* - deflateBound() returns an upper bound on the compressed size after -@@ -650,7 +650,7 @@ - for deflation in a single pass, and so would be called before deflate(). - */ - --ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, -+ZEXTERN ZEXPORT int deflatePrime OF((z_streamp strm, - int bits, - int value)); - /* -@@ -691,7 +691,7 @@ - */ - - /* --ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, -+ZEXTERN ZEXPORT int inflateInit2 OF((z_streamp strm, - int windowBits)); - - This is another version of inflateInit with an extra parameter. The -@@ -733,7 +733,7 @@ - and avail_out are unchanged.) - */ - --ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, -+ZEXTERN ZEXPORT int inflateSetDictionary OF((z_streamp strm, - const Bytef *dictionary, - uInt dictLength)); - /* -@@ -755,7 +755,7 @@ - inflate(). - */ - --ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); -+ZEXTERN ZEXPORT int inflateSync OF((z_streamp strm)); - /* - Skips invalid compressed data until a full flush point (see above the - description of deflate with Z_FULL_FLUSH) can be found, or until all -@@ -770,7 +770,7 @@ - until success or end of the input data. - */ - --ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, -+ZEXTERN ZEXPORT int inflateCopy OF((z_streamp dest, - z_streamp source)); - /* - Sets the destination stream as a complete copy of the source stream. -@@ -786,7 +786,7 @@ - destination. - */ - --ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); -+ZEXTERN ZEXPORT int inflateReset OF((z_streamp strm)); - /* - This function is equivalent to inflateEnd followed by inflateInit, - but does not free and reallocate all the internal decompression state. -@@ -853,7 +853,7 @@ - */ - - /* --ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, -+ZEXTERN ZEXPORT int inflateBackInit OF((z_streamp strm, int windowBits, - unsigned char FAR *window)); - - Initialize the internal stream state for decompression using inflateBack() -@@ -877,7 +877,7 @@ - typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *)); - typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); - --ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, -+ZEXTERN ZEXPORT int inflateBack OF((z_streamp strm, - in_func in, void FAR *in_desc, - out_func out, void FAR *out_desc)); - /* -@@ -946,7 +946,7 @@ - that inflateBack() cannot return Z_OK. - */ - --ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); -+ZEXTERN ZEXPORT int inflateBackEnd OF((z_streamp strm)); - /* - All memory allocated by inflateBackInit() is freed. - -@@ -954,7 +954,7 @@ - state was inconsistent. - */ - --ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); -+ZEXTERN ZEXPORT uLong zlibCompileFlags OF((void)); - /* Return flags indicating compile-time options. - - Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: -@@ -1006,7 +1006,7 @@ - utility functions can easily be modified if you need special options. - */ - --ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, -+ZEXTERN ZEXPORT int compress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); - /* - Compresses the source buffer into the destination buffer. sourceLen is -@@ -1021,7 +1021,7 @@ - buffer. - */ - --ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, -+ZEXTERN ZEXPORT int compress2 OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen, - int level)); - /* -@@ -1037,14 +1037,14 @@ - Z_STREAM_ERROR if the level parameter is invalid. - */ - --ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); -+ZEXTERN ZEXPORT uLong compressBound OF((uLong sourceLen)); - /* - compressBound() returns an upper bound on the compressed size after - compress() or compress2() on sourceLen bytes. It would be used before - a compress() or compress2() call to allocate the destination buffer. - */ - --ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, -+ZEXTERN ZEXPORT int uncompress OF((Bytef *dest, uLongf *destLen, - const Bytef *source, uLong sourceLen)); - /* - Decompresses the source buffer into the destination buffer. sourceLen is -@@ -1065,7 +1065,7 @@ - - typedef voidp gzFile; - --ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); -+ZEXTERN ZEXPORT gzFile gzopen OF((const char *path, const char *mode)); - /* - Opens a gzip (.gz) file for reading or writing. The mode parameter - is as in fopen ("rb" or "wb") but can also include a compression level -@@ -1082,7 +1082,7 @@ - can be checked to distinguish the two cases (if errno is zero, the - zlib error is Z_MEM_ERROR). */ - --ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); -+ZEXTERN ZEXPORT gzFile gzdopen OF((int fd, const char *mode)); - /* - gzdopen() associates a gzFile with the file descriptor fd. File - descriptors are obtained from calls like open, dup, creat, pipe or -@@ -1095,7 +1095,7 @@ - the (de)compression state. - */ - --ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); -+ZEXTERN ZEXPORT int gzsetparams OF((gzFile file, int level, int strategy)); - /* - Dynamically update the compression level or strategy. See the description - of deflateInit2 for the meaning of these parameters. -@@ -1103,7 +1103,7 @@ - opened for writing. - */ - --ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); -+ZEXTERN ZEXPORT int gzread OF((gzFile file, voidp buf, unsigned len)); - /* - Reads the given number of uncompressed bytes from the compressed file. - If the input file was not in gzip format, gzread copies the given number -@@ -1111,7 +1111,7 @@ - gzread returns the number of uncompressed bytes actually read (0 for - end of file, -1 for error). */ - --ZEXTERN int ZEXPORT gzwrite OF((gzFile file, -+ZEXTERN ZEXPORT int gzwrite OF((gzFile file, - voidpc buf, unsigned len)); - /* - Writes the given number of uncompressed bytes into the compressed file. -@@ -1119,7 +1119,7 @@ - (0 in case of error). - */ - --ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...)); -+ZEXTERN ZEXPORTVA int gzprintf OF((gzFile file, const char *format, ...)); - /* - Converts, formats, and writes the args to the compressed file under - control of the format string, as in fprintf. gzprintf returns the number of -@@ -1132,14 +1132,14 @@ - because the secure snprintf() or vsnprintf() functions were not available. - */ - --ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); -+ZEXTERN ZEXPORT int gzputs OF((gzFile file, const char *s)); - /* - Writes the given null-terminated string to the compressed file, excluding - the terminating null character. - gzputs returns the number of characters written, or -1 in case of error. - */ - --ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); -+ZEXTERN ZEXPORT char * gzgets OF((gzFile file, char *buf, int len)); - /* - Reads bytes from the compressed file until len-1 characters are read, or - a newline character is read and transferred to buf, or an end-of-file -@@ -1148,19 +1148,19 @@ - gzgets returns buf, or Z_NULL in case of error. - */ - --ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); -+ZEXTERN ZEXPORT int gzputc OF((gzFile file, int c)); - /* - Writes c, converted to an unsigned char, into the compressed file. - gzputc returns the value that was written, or -1 in case of error. - */ - --ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); -+ZEXTERN ZEXPORT int gzgetc OF((gzFile file)); - /* - Reads one byte from the compressed file. gzgetc returns this byte - or -1 in case of end of file or error. - */ - --ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); -+ZEXTERN ZEXPORT int gzungetc OF((int c, gzFile file)); - /* - Push one character back onto the stream to be read again later. - Only one character of push-back is allowed. gzungetc() returns the -@@ -1170,7 +1170,7 @@ - or gzrewind(). - */ - --ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); -+ZEXTERN ZEXPORT int gzflush OF((gzFile file, int flush)); - /* - Flushes all pending output into the compressed file. The parameter - flush is as in the deflate() function. The return value is the zlib -@@ -1180,7 +1180,7 @@ - degrade compression. - */ - --ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, -+ZEXTERN ZEXPORT z_off_t gzseek OF((gzFile file, - z_off_t offset, int whence)); - /* - Sets the starting position for the next gzread or gzwrite on the -@@ -1198,14 +1198,14 @@ - would be before the current position. - */ - --ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); -+ZEXTERN ZEXPORT int gzrewind OF((gzFile file)); - /* - Rewinds the given file. This function is supported only for reading. - - gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) - */ - --ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); -+ZEXTERN ZEXPORT z_off_t gztell OF((gzFile file)); - /* - Returns the starting position for the next gzread or gzwrite on the - given compressed file. This position represents a number of bytes in the -@@ -1214,26 +1214,26 @@ - gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) - */ - --ZEXTERN int ZEXPORT gzeof OF((gzFile file)); -+ZEXTERN ZEXPORT int gzeof OF((gzFile file)); - /* - Returns 1 when EOF has previously been detected reading the given - input stream, otherwise zero. - */ - --ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); -+ZEXTERN ZEXPORT int gzdirect OF((gzFile file)); - /* - Returns 1 if file is being read directly without decompression, otherwise - zero. - */ - --ZEXTERN int ZEXPORT gzclose OF((gzFile file)); -+ZEXTERN ZEXPORT int gzclose OF((gzFile file)); - /* - Flushes all pending output if necessary, closes the compressed file - and deallocates all the (de)compression state. The return value is the zlib - error number (see function gzerror below). - */ - --ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); -+ZEXTERN ZEXPORT const char * gzerror OF((gzFile file, int *errnum)); - /* - Returns the error message for the last error which occurred on the - given compressed file. errnum is set to zlib error number. If an -@@ -1242,7 +1242,7 @@ - to get the exact error code. - */ - --ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); -+ZEXTERN ZEXPORT void gzclearerr OF((gzFile file)); - /* - Clears the error and end-of-file flags for file. This is analogous to the - clearerr() function in stdio. This is useful for continuing to read a gzip -@@ -1257,7 +1257,7 @@ - compression library. - */ - --ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); -+ZEXTERN ZEXPORT uLong adler32 OF((uLong adler, const Bytef *buf, uInt len)); - /* - Update a running Adler-32 checksum with the bytes buf[0..len-1] and - return the updated checksum. If buf is NULL, this function returns -@@ -1282,7 +1282,7 @@ - seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. - */ - --ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); -+ZEXTERN ZEXPORT uLong crc32 OF((uLong crc, const Bytef *buf, uInt len)); - /* - Update a running CRC-32 with the bytes buf[0..len-1] and return the - updated CRC-32. If buf is NULL, this function returns the required initial -@@ -1314,17 +1314,17 @@ - /* deflateInit and inflateInit are macros to allow checking the zlib version - * and the compiler's view of z_stream: - */ --ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, -+ZEXTERN ZEXPORT int deflateInit_ OF((z_streamp strm, int level, - const char *version, int stream_size)); --ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, -+ZEXTERN ZEXPORT int inflateInit_ OF((z_streamp strm, - const char *version, int stream_size)); --ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, -+ZEXTERN ZEXPORT int deflateInit2_ OF((z_streamp strm, int level, int method, - int windowBits, int memLevel, - int strategy, const char *version, - int stream_size)); --ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, -+ZEXTERN ZEXPORT int inflateInit2_ OF((z_streamp strm, int windowBits, - const char *version, int stream_size)); --ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, -+ZEXTERN ZEXPORT int inflateBackInit_ OF((z_streamp strm, int windowBits, - unsigned char FAR *window, - const char *version, - int stream_size)); -@@ -1346,9 +1346,9 @@ - struct internal_state {int dummy;}; /* hack for buggy compilers */ - #endif - --ZEXTERN const char * ZEXPORT zError OF((int)); --ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp z)); --ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void)); -+ZEXTERN ZEXPORT const char * zError OF((int)); -+ZEXTERN ZEXPORT int inflateSyncPoint OF((z_streamp z)); -+ZEXTERN ZEXPORT const uLongf * get_crc_table OF((void)); - - #ifdef __cplusplus - } ---- zlib-1.2.3-orig/zutil.c~visibility -+++ zlib-1.2.3-orig/zutil.c -@@ -24,12 +24,12 @@ - ""}; - - --const char * ZEXPORT zlibVersion() -+ZEXPORT const char * zlibVersion() - { - return ZLIB_VERSION; - } - --uLong ZEXPORT zlibCompileFlags() -+ZEXPORT uLong zlibCompileFlags() - { - uLong flags; - -@@ -130,7 +130,7 @@ - /* exported to allow conversion of error code to string for compress() and - * uncompress() - */ --const char * ZEXPORT zError(err) -+ZEXPORT const char * zError(err) - int err; - { - return ERR_MSG(err); -- cgit v1.2.3