From 97453a1b8122ae2cd0e86e5fc8551de20f34b541 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Wed, 17 Jan 2007 15:51:26 +0000 Subject: linux-rp: Add missing vesa-tng patch for 2.6.19+2.6.20-rc4 for qemux86 git-svn-id: https://svn.o-hand.com/repos/poky/trunk@1156 311d38ba-8fff-0310-9ca6-ca027cbcb966 --- .../vesafb-tng-1.0-rc2-2.6.20-rc2.patch | 3141 ++++++++++++++++++++ .../vesafb-tng-1.0-rc2-git-20060629.patch | 3089 ------------------- meta/packages/linux/linux-rp_2.6.19+2.6.20-rc4.bb | 1 + 3 files changed, 3142 insertions(+), 3089 deletions(-) create mode 100644 meta/packages/linux/linux-rp-2.6.19+2.6.20-rc4/vesafb-tng-1.0-rc2-2.6.20-rc2.patch delete mode 100644 meta/packages/linux/linux-rp-2.6.19+2.6.20-rc4/vesafb-tng-1.0-rc2-git-20060629.patch (limited to 'meta/packages') diff --git a/meta/packages/linux/linux-rp-2.6.19+2.6.20-rc4/vesafb-tng-1.0-rc2-2.6.20-rc2.patch b/meta/packages/linux/linux-rp-2.6.19+2.6.20-rc4/vesafb-tng-1.0-rc2-2.6.20-rc2.patch new file mode 100644 index 000000000..b1b0fc354 --- /dev/null +++ b/meta/packages/linux/linux-rp-2.6.19+2.6.20-rc4/vesafb-tng-1.0-rc2-2.6.20-rc2.patch @@ -0,0 +1,3141 @@ +diff --git a/Documentation/fb/vesafb.txt b/Documentation/fb/vesafb.txt +index ee277dd..93d6e6e 100644 +--- a/Documentation/fb/vesafb.txt ++++ b/Documentation/fb/vesafb.txt +@@ -2,16 +2,18 @@ + What is vesafb? + =============== + +-This is a generic driver for a graphic framebuffer on intel boxes. ++Vesafb is a generic framebuffer driver for x86 and x86_64 boxes. + +-The idea is simple: Turn on graphics mode at boot time with the help +-of the BIOS, and use this as framebuffer device /dev/fb0, like the m68k +-(and other) ports do. ++VESA BIOS Extensions Version 2.0 are required, because we need access to ++a linear frame buffer. VBE 3.0 is required if you want to use modes with a ++higher (than the standard 60 Hz) refresh rate. + +-This means we decide at boot time whenever we want to run in text or +-graphics mode. Switching mode later on (in protected mode) is +-impossible; BIOS calls work in real mode only. VESA BIOS Extensions +-Version 2.0 are required, because we need a linear frame buffer. ++The VESA framebuffer driver comes in two flavors - the standard 'vesafb' ++and 'vesafb-tng'. Vesafb-tng is available only on 32-bit x86 due to the ++technology it uses (vm86). Vesafb-tng has more features than vesafb ++(adjusting the refresh rate on VBE 3.0 compliant boards, switching the ++video mode without rebooting, selecting a mode by providing its ++modedb name, and more). + + Advantages: + +@@ -29,26 +31,35 @@ Disadvantages: + How to use it? + ============== + +-Switching modes is done using the vga=... boot parameter. Read +-Documentation/svga.txt for details. ++If you are running a 32-bit x86 system and you decide to use vesafb-tng, ++you can either compile the driver into the kernel or use it as a module. ++The graphics mode you want to use is in both cases specified using the ++standard modedb format. + +-You should compile in both vgacon (for text mode) and vesafb (for +-graphics mode). Which of them takes over the console depends on +-whenever the specified mode is text or graphics. ++If your system doesn't support vm86 calls, things get a little more tricky. ++Since on such systems you can't do BIOS calls from protected mode in which ++kernel runs, you have to decide at boot time whenever you want to run in text ++or in graphics mode. Switching mode later on is impossible. Switching modes ++is done using the vga=... boot parameter. Read Documentation/svga.txt for ++details. Below is a more detailed description of what to do on systems using ++the standard vesafb driver. + +-The graphic modes are NOT in the list which you get if you boot with +-vga=ask and hit return. The mode you wish to use is derived from the +-VESA mode number. Here are those VESA mode numbers: ++You should compile in both vgacon (for text mode) and vesafb (for graphics ++mode). Which of them takes over the console depends on whenever the ++specified mode is text or graphics. ++ ++The graphic modes are NOT in the list which you get if you boot with vga=ask ++and hit return. The mode you wish to use is derived from the VESA mode number. ++Here are those VESA mode numbers: + + | 640x480 800x600 1024x768 1280x1024 + ----+------------------------------------- +-256 | 0x101 0x103 0x105 0x107 +-32k | 0x110 0x113 0x116 0x119 +-64k | 0x111 0x114 0x117 0x11A +-16M | 0x112 0x115 0x118 0x11B ++256 | 0x101 0x103 0x105 0x107 ++32k | 0x110 0x113 0x116 0x119 ++64k | 0x111 0x114 0x117 0x11A ++16M | 0x112 0x115 0x118 0x11B + +-The video mode number of the Linux kernel is the VESA mode number plus +-0x200. ++The video mode number of the Linux kernel is the VESA mode number plus 0x200. + + Linux_kernel_mode_number = VESA_mode_number + 0x200 + +@@ -56,15 +67,15 @@ So the table for the Kernel mode numbers are: + + | 640x480 800x600 1024x768 1280x1024 + ----+------------------------------------- +-256 | 0x301 0x303 0x305 0x307 +-32k | 0x310 0x313 0x316 0x319 +-64k | 0x311 0x314 0x317 0x31A +-16M | 0x312 0x315 0x318 0x31B ++256 | 0x301 0x303 0x305 0x307 ++32k | 0x310 0x313 0x316 0x319 ++64k | 0x311 0x314 0x317 0x31A ++16M | 0x312 0x315 0x318 0x31B + +-To enable one of those modes you have to specify "vga=ask" in the +-lilo.conf file and rerun LILO. Then you can type in the desired +-mode at the "vga=ask" prompt. For example if you like to use +-1024x768x256 colors you have to say "305" at this prompt. ++To enable one of those modes you have to specify "vga=ask" in the lilo.conf ++file and rerun LILO. Then you can type in the desired mode at the "vga=ask" ++prompt. For example if you like to use 1024x768x256 colors you have to say ++"305" at this prompt. + + If this does not work, this might be because your BIOS does not support + linear framebuffers or because it does not support this mode at all. +@@ -72,11 +83,12 @@ Even if your board does, it might be the BIOS which does not. VESA BIOS + Extensions v2.0 are required, 1.2 is NOT sufficient. You will get a + "bad mode number" message if something goes wrong. + +-1. Note: LILO cannot handle hex, for booting directly with ++1. Note: LILO cannot handle hex, for booting directly with + "vga=mode-number" you have to transform the numbers to decimal. + 2. Note: Some newer versions of LILO appear to work with those hex values, + if you set the 0x in front of the numbers. + ++ + X11 + === + +@@ -84,98 +96,164 @@ XF68_FBDev should work just fine, but it is non-accelerated. Running + another (accelerated) X-Server like XF86_SVGA might or might not work. + It depends on X-Server and graphics board. + +-The X-Server must restore the video mode correctly, else you end up ++The X-Server must restore the video mode correctly, or else you end up + with a broken console (and vesafb cannot do anything about this). ++With vesafb-tng chances are that the console will be restored properly ++even if the X server messes up the video mode. + + + Refresh rates + ============= + +-There is no way to change the vesafb video mode and/or timings after +-booting linux. If you are not happy with the 60 Hz refresh rate, you +-have these options: ++With VBE 3.0 compatible BIOSes and vesafb-tng it is possible to change ++the refresh rate either at boot time (by specifying the @ part of ++the mode name) or later, using the fbset utility. ++ ++If you want to use the default BIOS refresh rate while switching modes ++on a running system, set pixclock to 0. + +- * configure and load the DOS-Tools for your the graphics board (if +- available) and boot linux with loadlin. +- * use a native driver (matroxfb/atyfb) instead if vesafb. If none ++With VBE 2.0 there is no way to change the mode timings after booting ++Linux. If you are not happy with the 60 Hz refresh rate, you have ++the following options: ++ ++ * Configure and load the DOS tools for your the graphics board (if ++ available) and boot Linux with loadlin. ++ * Use a native driver (matroxfb/atyfb) instead of vesafb. If none + is available, write a new one! +- * VBE 3.0 might work too. I have neither a gfx board with VBE 3.0 +- support nor the specs, so I have not checked this yet. ++ * Use a BIOS editor to change the default refresh rate (such an ++ editor does exist at least for ATI Radeon BIOSes). ++ * If you're running a non-vm86 and VBE 3.0 compatible system, you can ++ use a kernel patch (vesafb-rrc) to hard-code some mode timings in ++ the kernel and use these while setting the video mode at boot time. ++ ++Note that there are some boards (nVidia 59**, 57** and newer models) ++claiming that their Video BIOS is VBE 3.0 compliant, while ignoring the ++CRTC values provided by software such as vesafb-tng. You'll not be able ++to adjust the refresh rate if you're using one of these boards. + + + Configuration + ============= + +-The VESA BIOS provides protected mode interface for changing +-some parameters. vesafb can use it for palette changes and +-to pan the display. It is turned off by default because it +-seems not to work with some BIOS versions, but there are options +-to turn it on. +- +-You can pass options to vesafb using "video=vesafb:option" on +-the kernel command line. Multiple options should be separated +-by comma, like this: "video=vesafb:ypan,invers" +- +-Accepted options: +- +-invers no comment... +- +-ypan enable display panning using the VESA protected mode +- interface. The visible screen is just a window of the +- video memory, console scrolling is done by changing the +- start of the window. +- pro: * scrolling (fullscreen) is fast, because there is +- no need to copy around data. +- * You'll get scrollback (the Shift-PgUp thing), +- the video memory can be used as scrollback buffer +- kontra: * scrolling only parts of the screen causes some +- ugly flicker effects (boot logo flickers for +- example). +- +-ywrap Same as ypan, but assumes your gfx board can wrap-around +- the video memory (i.e. starts reading from top if it +- reaches the end of video memory). Faster than ypan. +- +-redraw scroll by redrawing the affected part of the screen, this +- is the safe (and slow) default. +- +- +-vgapal Use the standard vga registers for palette changes. +- This is the default. +-pmipal Use the protected mode interface for palette changes. +- +-mtrr:n setup memory type range registers for the vesafb framebuffer +- where n: +- 0 - disabled (equivalent to nomtrr) (default) +- 1 - uncachable +- 2 - write-back +- 3 - write-combining +- 4 - write-through +- +- If you see the following in dmesg, choose the type that matches the +- old one. In this example, use "mtrr:2". ++The VESA BIOS provides protected mode interface for changing some parameters. ++vesafb can use it for palette changes and to pan the display. It is turned ++off by default because it seems not to work with some BIOS versions, but ++there are options to turn it on. ++ ++You can pass options to vesafb using "video=vesafb:option" on the kernel ++command line. Multiple options should be separated by a comma, like this: ++"video=vesafb:ypan,1024x768-32@85" ++ ++Note that vesafb-tng still uses the "video=vesafb:option" format of the ++kernel command line video parameter. "video=vesafb-tng:xxx" is incorrect. ++ ++Accepted options (both vesafb and vesafb-tng): ++ ++ypan Enable display panning using the VESA protected mode interface ++ The visible screen is just a window of the video memory, ++ console scrolling is done by changing the start of the window. ++ pro: * scrolling (fullscreen) is fast, because there is ++ no need to copy around data. ++ * you'll get scrollback (the Shift-PgUp thing), ++ the video memory can be used as scrollback buffer ++ con: * scrolling only parts of the screen causes some ++ ugly flicker effects (boot logo flickers for ++ example). ++ ++ywrap Same as ypan, but assumes your gfx board can wrap-around the video ++ memory (i.e. starts reading from top if it reaches the end of ++ video memory). Faster than ypan. ++ ++redraw Scroll by redrawing the affected part of the screen, this is the ++ safe (and slow) default. ++ ++vgapal Use the standard VGA registers for palette changes. ++ ++pmipal Use the protected mode interface for palette changes. ++ This is the default is the protected mode interface is available. ++ ++mtrr:n Setup memory type range registers for the vesafb framebuffer ++ where n: ++ 0 - disabled (equivalent to nomtrr) (default) ++ 1 - uncachable ++ 2 - write-back ++ 3 - write-combining ++ 4 - write-through ++ ++ If you see the following in dmesg, choose the type that matches ++ the old one. In this example, use "mtrr:2". + ... + mtrr: type mismatch for e0000000,8000000 old: write-back new: write-combining + ... + +-nomtrr disable mtrr ++nomtrr Do not use memory type range registers for vesafb. + + vremap:n + remap 'n' MiB of video RAM. If 0 or not specified, remap memory +- according to video mode. (2.5.66 patch/idea by Antonino Daplas +- reversed to give override possibility (allocate more fb memory +- than the kernel would) to 2.4 by tmb@iki.fi) ++ according to video mode. (2.5.66 patch/idea by Antonino Daplas ++ reversed to give override possibility (allocate more fb memory ++ than the kernel would) to 2.4 by tmb@iki.fi) + + vtotal:n + if the video BIOS of your card incorrectly determines the total + amount of video RAM, use this option to override the BIOS (in MiB). + +-Have fun! ++Options accepted only by vesafb-tng: ++ ++ The mode you want to set, in the standard modedb format. Refer to ++ modedb.txt for a detailed description. If you specify a mode that is ++ not supported by your board's BIOS, vesafb-tng will attempt to set a ++ similar mode. The list of supported modes can be found in ++ /proc/fbx/modes, where x is the framebuffer number (usually 0). ++ When vesafb-tng is compiled as a module, the mode string should be ++ provided as a value of the parameter 'mode'. ++ ++vbemode:x ++ Force the use of VBE mode x. The mode will only be set if it's ++ found in the VBE-provided list of supported modes. ++ NOTE: The mode number 'x' should be specified in VESA mode number ++ notation, not the Linux kernel one (eg. 257 instead of 769). ++ HINT: If you use this option because normal parameter does ++ not work for you and you use a X server, you'll probably want to ++ set the 'nocrtc' option to ensure that the video mode is properly ++ restored after console <-> X switches. ++ ++nocrtc Do not use CRTC timings while setting the video mode. This option ++ makes sence only with VBE 3.0 compliant systems. Use it if you have ++ problems with modes set in the standard way. Note that using this ++ option means that any refresh rate adjustments will be ignored ++ and the refresh rate will stay at your BIOS default (60 Hz). ++ ++noedid Do not try to fetch and use EDID-provided modes. ++ ++noblank Disable hardware blanking. ++ ++gtf Force the use of VESA's GTF (Generalized Timing Formula). Specifying ++ this will cause vesafb to skip its internal modedb and EDID-modedb ++ and jump straight to the GTF part of the code (normally used only if ++ everything else failed). This can be useful if you want to get as ++ much as possible from your graphics board but your BIOS doesn't ++ support modes with the refresh rates you require. Note that you may ++ need to specify the maxhf, maxvf and maxclk parameters if they are not ++ provided by the EDID block. ++ ++Additionally, the following parameters may be provided. They all override the ++EDID-provided values and BIOS defaults. Refer to your monitor's specs to get ++the correct values for maxhf, maxvf and maxclk for your hardware. ++ ++maxhf:n Maximum horizontal frequency (in kHz). ++maxvf:n Maximum vertical frequency (in Hz). ++maxclk:n Maximum pixel clock (in MHz). + +- Gerd ++Have fun! + + -- ++Original document for the vesafb driver by + Gerd Knorr + +-Minor (mostly typo) changes +-by Nico Schmoigl ++Minor (mostly typo) changes by ++Nico Schmoigl ++ ++Extended documentation for vm86, VBE 3.0 and vesafb-tng by ++Michal Januszewski ++ +diff --git a/arch/i386/boot/video.S b/arch/i386/boot/video.S +index 2c5b5cc..2c2d4b5 100644 +--- a/arch/i386/boot/video.S ++++ b/arch/i386/boot/video.S +@@ -163,10 +163,12 @@ basret: ret + # parameters in the default 80x25 mode -- these are set directly, + # because some very obscure BIOSes supply insane values. + mode_params: ++#ifdef CONFIG_FB_VESA_STD + #ifdef CONFIG_VIDEO_SELECT + cmpb $0, graphic_mode + jnz mopar_gr + #endif ++#endif + movb $0x03, %ah # Read cursor position + xorb %bh, %bh + int $0x10 +@@ -199,6 +201,7 @@ mopar2: movb %al, %fs:(PARAM_VIDEO_LINES) + ret + + #ifdef CONFIG_VIDEO_SELECT ++#ifdef CONFIG_FB_VESA_STD + # Fetching of VESA frame buffer parameters + mopar_gr: + leaw modelist+1024, %di +@@ -281,6 +284,7 @@ dac_done: + movw %es, %fs:(PARAM_VESAPM_SEG) + movw %di, %fs:(PARAM_VESAPM_OFF) + no_pm: ret ++#endif + + # The video mode menu + mode_menu: +@@ -495,10 +499,12 @@ mode_set: + + cmpb $VIDEO_FIRST_V7>>8, %ah + jz setv7 +- ++ ++#ifdef CONFIG_FB_VESA_STD + cmpb $VIDEO_FIRST_VESA>>8, %ah + jnc check_vesa +- ++#endif ++ + orb %ah, %ah + jz setmenu + +@@ -570,6 +576,7 @@ setr1: lodsw + movw -4(%si), %ax # Fetch mode ID + jmp _m_s + ++#ifdef CONFIG_FB_VESA_STD + check_vesa: + leaw modelist+1024, %di + subb $VIDEO_FIRST_VESA>>8, %bh +@@ -603,6 +610,7 @@ check_vesa: + ret + + _setbad: jmp setbad # Ugly... ++#endif + + # Recalculate vertical display end registers -- this fixes various + # inconsistencies of extended modes on many adapters. Called when +diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c +index 1393523..8a05f95 100644 +--- a/drivers/char/sysrq.c ++++ b/drivers/char/sysrq.c +@@ -240,7 +240,7 @@ static void send_sig_all(int sig) + struct task_struct *p; + + for_each_process(p) { +- if (p->mm && !is_init(p)) ++ if (p->mm && !is_init(p) && !(p->flags & PF_BORROWED_MM)) + /* Not swapper, init nor kernel thread */ + force_sig(sig, p); + } +diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig +index 4e83f01..ae122fd 100644 +--- a/drivers/video/Kconfig ++++ b/drivers/video/Kconfig +@@ -547,8 +547,22 @@ config FB_TGA + cards. Say Y if you have one of those. + + config FB_VESA +- bool "VESA VGA graphics support" +- depends on (FB = y) && X86 ++ tristate "VESA VGA graphics support" ++ depends on (FB = y) && (X86 || X86_64) ++ help ++ This is the frame buffer device driver for generic VESA 2.0 ++ compliant graphic cards. The older VESA 1.2 cards are not supported. ++ You will get a boot time penguin logo at no additional cost. Please ++ read . If unsure, say Y. ++ ++choice ++ prompt "VESA driver type" ++ depends on FB_VESA ++ default FB_VESA_STD if X86_64 ++ default FB_VESA_TNG if X86 ++ ++config FB_VESA_STD ++ bool "vesafb" + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT +@@ -557,7 +571,43 @@ config FB_VESA + This is the frame buffer device driver for generic VESA 2.0 + compliant graphic cards. The older VESA 1.2 cards are not supported. + You will get a boot time penguin logo at no additional cost. Please +- read . If unsure, say Y. ++ read . Choose this driver if you ++ are experiencing problems with vesafb-tng or if you own a 64-bit system. ++ ++ Note that this driver cannot be compiled as a module. ++ ++config FB_VESA_TNG ++ bool "vesafb-tng" ++ depends on !X86_64 ++ select FB_MODE_HELPERS ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ help ++ This is an enhanced generic frame buffer device driver for ++ VBE 2.0 compliant graphic cards. It can take advantage of VBE 3.0 ++ features (refresh rate adjustment) when these are available. ++ The driver also makes it possible to change the video mode ++ on the fly and to switch back to text mode when it's unloaded. ++ ++ If the driver is compiled as a module, the module will be called ++ vesafb-tng. ++ ++endchoice ++ ++config FB_VESA_DEFAULT_MODE ++ string "VESA default mode" ++ depends on FB_VESA_TNG ++ default "640x480@60" ++ help ++ This option is used to determine the default mode vesafb is ++ supposed to switch to in case no mode is provided as a kernel ++ command line parameter. ++ ++config VIDEO_SELECT ++ bool ++ depends on FB_VESA ++ default y + + config FB_IMAC + bool "Intel-based Macintosh Framebuffer Support" +diff --git a/drivers/video/Makefile b/drivers/video/Makefile +index 309a26d..e57b0e7 100644 +--- a/drivers/video/Makefile ++++ b/drivers/video/Makefile +@@ -102,7 +102,11 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnx4008/ + obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o + + # Platform or fallback drivers go here +-obj-$(CONFIG_FB_VESA) += vesafb.o ++ifeq ($(CONFIG_FB_VESA_STD),y) ++ obj-y += vesafb.o ++else ++ obj-$(CONFIG_FB_VESA) += vesafb-thread.o vesafb-tng.o ++endif + obj-$(CONFIG_FB_IMAC) += imacfb.o + obj-$(CONFIG_FB_VGA16) += vga16fb.o vgastate.o + obj-$(CONFIG_FB_OF) += offb.o +diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c +index 3cfea31..bfb39cc 100644 +--- a/drivers/video/fbmem.c ++++ b/drivers/video/fbmem.c +@@ -1408,6 +1408,7 @@ fbmem_init(void) + printk(KERN_WARNING "Unable to create fb class; errno = %ld\n", PTR_ERR(fb_class)); + fb_class = NULL; + } ++ + return 0; + } + +diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c +index 5df41f6..f838a53 100644 +--- a/drivers/video/modedb.c ++++ b/drivers/video/modedb.c +@@ -674,6 +674,7 @@ void fb_var_to_videomode(struct fb_videomode *mode, + { + u32 pixclock, hfreq, htotal, vtotal; + ++ mode->refresh = 0; + mode->name = NULL; + mode->xres = var->xres; + mode->yres = var->yres; +@@ -1025,3 +1026,4 @@ EXPORT_SYMBOL(fb_find_best_mode); + EXPORT_SYMBOL(fb_find_nearest_mode); + EXPORT_SYMBOL(fb_videomode_to_modelist); + EXPORT_SYMBOL(fb_find_mode); ++EXPORT_SYMBOL(fb_destroy_modelist); +diff --git a/drivers/video/vesafb-thread.c b/drivers/video/vesafb-thread.c +new file mode 100644 +index 0000000..543e202 +--- /dev/null ++++ b/drivers/video/vesafb-thread.c +@@ -0,0 +1,751 @@ ++/* ++ * Framebuffer driver for VBE 2.0+ compliant graphic boards. ++ * Kernel thread and vm86 routines. ++ * ++ * (c) 2004-2006 Michal Januszewski ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include