From 3f8afe492fffd7259e754b335df4839b4f0b2d41 Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Wed, 26 Aug 2009 10:55:02 -0500 Subject: linux-omap3-pm: refresh patches and remove some sed magic to boot zoom2 Signed-off-by: Mike Turquette --- .../zoom2/0001-OMAP1-2-3-4-DEBUG_LL-cleanup.patch | 217 ++++ .../zoom2/0001-OMAP3-MMC-Add-mux-for-pins.patch | 170 --- ...-Adapt-board-files-for-cleand-DEBUG_LL-in.patch | 268 +++++ .../0002-OMAP3-Zoom2-Add-TWL4030-support.patch | 281 ----- ...Add-DEBUG_LL-interface-using-external-Qua.patch | 171 +++ .../0003-OMAP3-Zoom2-Update-board-defconfig.patch | 1102 -------------------- .../0004-serial-8250-add-IRQ-trigger-support.patch | 143 --- ...-OMAP-Zoom2-Release-Dbg-board-detect-gpio.patch | 41 + ...-OMAP2-Zoom2-Pass-irqflags-to-8250-driver.patch | 41 - ...-Zoom2-ext-UART-needs-plaform_device.id-3.patch | 29 - ...add-external-uart-DEBUG_LL-support-to-zoo.patch | 71 -- ...add-support-for-DEBUG_LL-on-external-UART.patch | 103 -- meta/packages/linux/linux-omap3-pm_git.bb | 23 +- 13 files changed, 706 insertions(+), 1954 deletions(-) create mode 100644 meta/packages/linux/linux-omap3-pm-git/zoom2/0001-OMAP1-2-3-4-DEBUG_LL-cleanup.patch delete mode 100644 meta/packages/linux/linux-omap3-pm-git/zoom2/0001-OMAP3-MMC-Add-mux-for-pins.patch create mode 100644 meta/packages/linux/linux-omap3-pm-git/zoom2/0002-OMAP1-2-3-4-Adapt-board-files-for-cleand-DEBUG_LL-in.patch delete mode 100644 meta/packages/linux/linux-omap3-pm-git/zoom2/0002-OMAP3-Zoom2-Add-TWL4030-support.patch create mode 100644 meta/packages/linux/linux-omap3-pm-git/zoom2/0003-OMAP-Zoom2-Add-DEBUG_LL-interface-using-external-Qua.patch delete mode 100644 meta/packages/linux/linux-omap3-pm-git/zoom2/0003-OMAP3-Zoom2-Update-board-defconfig.patch delete mode 100644 meta/packages/linux/linux-omap3-pm-git/zoom2/0004-serial-8250-add-IRQ-trigger-support.patch create mode 100644 meta/packages/linux/linux-omap3-pm-git/zoom2/0005-OMAP-Zoom2-Release-Dbg-board-detect-gpio.patch delete mode 100644 meta/packages/linux/linux-omap3-pm-git/zoom2/0005-OMAP2-Zoom2-Pass-irqflags-to-8250-driver.patch delete mode 100644 meta/packages/linux/linux-omap3-pm-git/zoom2/0006-OMAP3-Zoom2-ext-UART-needs-plaform_device.id-3.patch delete mode 100644 meta/packages/linux/linux-omap3-pm-git/zoom2/0007-omap-zoom2-add-external-uart-DEBUG_LL-support-to-zoo.patch delete mode 100644 meta/packages/linux/linux-omap3-pm-git/zoom2/0008-omap2-add-support-for-DEBUG_LL-on-external-UART.patch (limited to 'meta') diff --git a/meta/packages/linux/linux-omap3-pm-git/zoom2/0001-OMAP1-2-3-4-DEBUG_LL-cleanup.patch b/meta/packages/linux/linux-omap3-pm-git/zoom2/0001-OMAP1-2-3-4-DEBUG_LL-cleanup.patch new file mode 100644 index 000000000..e1e216c91 --- /dev/null +++ b/meta/packages/linux/linux-omap3-pm-git/zoom2/0001-OMAP1-2-3-4-DEBUG_LL-cleanup.patch @@ -0,0 +1,217 @@ +From 51f967864f0e30225c8a8e50e0bbaf92258c0032 Mon Sep 17 00:00:00 2001 +From: Vikram Pandita +Date: Thu, 20 Aug 2009 16:13:20 -0500 +Subject: [PATCH 1/5] OMAP1/2/3/4: DEBUG_LL: cleanup + +This patch cleans up the DEBUG_LL infrastructure for omap boards. + +The three stages of log printing infrastructure is using their own #defines +The patch integrates the three stages to use the same variable. + +Three stages are: +Stage 1: Prints - Uncompressing Linux...... + File getting used: arch/arm/plat-omap/include/mach/uncompress.h +Stage 2: Prints - <5>Linux version 2.6.31 + File getting used: arch/arm/plat-omap/include/mach/debug-macro.S +Stage 3: Kernel ttyS console takes over + +On enabling the DEBUG_LL menuconfig item +[Kernel Hacking -> Kernel low-level debugging functions] + +the following entry gets auto selected +[Systerm Type -> TI OMAP Implementations -> Low-level Debug console UART] + +This is the physical address of the UART getting used for the board. +The physical address of debug uart is provided as a menuconfig option now. + +Issue with current system: +(a) Zoom2 board has a detachable debug board having the TL16CP754 Quad uart chip. +If the debug board is not attached, _NO_ debug uart is available. +OMAP internal uarts are not used for traces on zoom2 board. +Current framework does not account for boards that may not have a debug uart +at all. The Stage 1 always accesses one of the uarts. Thats fixed now. + +(b) this patch does a cleanup of arch/arm/plat-omap/include/mach/debug-macro.S + +Signed-off-by: Vikram Pandita +--- + arch/arm/plat-omap/Kconfig | 50 ++++++++++++++++++------- + arch/arm/plat-omap/include/mach/common.h | 7 +++ + arch/arm/plat-omap/include/mach/debug-macro.S | 40 ++++---------------- + arch/arm/plat-omap/include/mach/uncompress.h | 12 +---- + 4 files changed, 54 insertions(+), 55 deletions(-) + +diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig +index ab9f9ef..2fefb64 100644 +--- a/arch/arm/plat-omap/Kconfig ++++ b/arch/arm/plat-omap/Kconfig +@@ -162,21 +162,43 @@ config OMAP_DM_TIMER + help + Select this option if you want to use OMAP Dual-Mode timers. + +-choice +- prompt "Low-level debug console UART" +- depends on ARCH_OMAP +- default OMAP_LL_DEBUG_UART1 +- +-config OMAP_LL_DEBUG_UART1 +- bool "UART1" +- +-config OMAP_LL_DEBUG_UART2 +- bool "UART2" + +-config OMAP_LL_DEBUG_UART3 +- bool "UART3" +- +-endchoice ++config OMAP_DEBUG_LL_UART_PHY_ADDR ++ hex "Low-level debug console UART Physical Address" ++ depends on ARCH_OMAP && DEBUG_LL ++ ++ default "0xfffb0800" if ARCH_OMAP1 && (MACH_OMAP_PALMTT || MACH_SX1) ++ default "0xfffb0000" if ARCH_OMAP1 ++ default "0x4806e000" if ARCH_OMAP2 && MACH_NOKIA_N8X0 ++ default "0x4806a000" if ARCH_OMAP2 ++ default "0x49020000" if ARCH_OMAP3 && (MACH_NOKIA_RX51 || MACH_OMAP_BEAGLE) ++ default "0x49020000" if ARCH_OMAP3 && (MACH_OMAP3_PANDORA || MACH_OMAP_LDP || MACH_OVERO) ++ default "0x10000000" if ARCH_OMAP3 && MACH_OMAP_ZOOM2 ++ default "0x4806a000" if ARCH_OMAP3 ++ default "0x4806a000" if ARCH_OMAP4 ++ help ++ Specify the Physical address of Low level debug UART ++ Specify 0x0 in case you do not want DEBUG_LL functions to iterfere with your board uarts ++ ++ OMAP1: ++ ------------------- ++ UART1 -> 0xfffb0000 (default) ++ UART2 -> 0xfffb0800 ++ UART3 -> 0xfffb9800 (sx1, palmtt) ++ ++ OMAP2: ++ ------------------- ++ UART1 -> 0x4806a000 (default) ++ UART2 -> 0x4806c000 ++ UART3 -> 0x4806e000 (N8X0) ++ ++ OMAP3/4: ++ ------------------- ++ UART1 -> 0x4806a000 (default: except following) ++ UART2 -> 0x4806c000 ++ UART3 -> 0x49020000 (rx51, beagle, pendora, ldp, overo) ++ UART4 -> 0x4806e000 ++ UART_EXT -> 0x10000000 (zoom2: Debug uart is on external debug board) + + config OMAP_SERIAL_WAKE + bool "Enable wake-up events for serial ports" +diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h +index fdeab42..f29d31f 100644 +--- a/arch/arm/plat-omap/include/mach/common.h ++++ b/arch/arm/plat-omap/include/mach/common.h +@@ -68,4 +68,11 @@ void omap2_set_globals_sdrc(struct omap_globals *); + void omap2_set_globals_control(struct omap_globals *); + void omap2_set_globals_prcm(struct omap_globals *); + ++/* In case Low Level debug is not defined ++ * make the low level uart address as zero ++ */ ++#if !defined(CONFIG_DEBUG_LL) ++#define CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR 0 ++#endif ++ + #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ +diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S +index ac24050..f546d6c 100644 +--- a/arch/arm/plat-omap/include/mach/debug-macro.S ++++ b/arch/arm/plat-omap/include/mach/debug-macro.S +@@ -10,43 +10,19 @@ + * published by the Free Software Foundation. + * + */ ++#include "io.h" + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + #ifdef CONFIG_ARCH_OMAP1 +- moveq \rx, #0xff000000 @ physical base address +- movne \rx, #0xfe000000 @ virtual base +- orr \rx, \rx, #0x00fb0000 +-#ifdef CONFIG_OMAP_LL_DEBUG_UART3 +- orr \rx, \rx, #0x00009000 @ UART 3 +-#endif +-#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3) +- orr \rx, \rx, #0x00000800 @ UART 2 & 3 +-#endif +- +-#elif CONFIG_ARCH_OMAP2 +- moveq \rx, #0x48000000 @ physical base address +- movne \rx, #0xd8000000 @ virtual base +- orr \rx, \rx, #0x0006a000 +-#ifdef CONFIG_OMAP_LL_DEBUG_UART2 +- add \rx, \rx, #0x00002000 @ UART 2 +-#endif +-#ifdef CONFIG_OMAP_LL_DEBUG_UART3 +- add \rx, \rx, #0x00004000 @ UART 3 +-#endif +- +-#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) +- moveq \rx, #0x48000000 @ physical base address +- movne \rx, #0xd8000000 @ virtual base +- orr \rx, \rx, #0x0006a000 +-#ifdef CONFIG_OMAP_LL_DEBUG_UART2 +- add \rx, \rx, #0x00002000 @ UART 2 +-#endif +-#ifdef CONFIG_OMAP_LL_DEBUG_UART3 +- add \rx, \rx, #0x00fb0000 @ UART 3 +- add \rx, \rx, #0x00006000 +-#endif ++ /* omap1 */ ++ ldr \rx, =CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR @ physical base address ++ subne \rx, #CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, #OMAP1_IO_OFFSET @ virtual base ++#else ++ /* omap2/omap3/omap4 */ ++ ldr \rx, =CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR @ physical base address ++ orrne \rx, \rx, #OMAP2_IO_OFFSET @ virtual base + #endif + .endm + +diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h +index 0814c5f..0e21eb3 100644 +--- a/arch/arm/plat-omap/include/mach/uncompress.h ++++ b/arch/arm/plat-omap/include/mach/uncompress.h +@@ -38,14 +38,8 @@ static void putc(int c) + return; + #endif + +-#ifdef CONFIG_ARCH_OMAP +-#ifdef CONFIG_OMAP_LL_DEBUG_UART3 +- uart = (volatile u8 *)(OMAP_UART3_BASE); +-#elif defined(CONFIG_OMAP_LL_DEBUG_UART2) +- uart = (volatile u8 *)(OMAP_UART2_BASE); +-#else +- uart = (volatile u8 *)(OMAP_UART1_BASE); +-#endif ++#if defined(CONFIG_DEBUG_LL) ++ uart = (volatile u8 *)(CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR); + + #ifdef CONFIG_ARCH_OMAP1 + /* Determine which serial port to use */ +@@ -62,7 +56,6 @@ static void putc(int c) + return; + } while (0); + #endif /* CONFIG_ARCH_OMAP1 */ +-#endif + + /* + * Now, xmit each character +@@ -70,6 +63,7 @@ static void putc(int c) + while (!(uart[UART_LSR << shift] & UART_LSR_THRE)) + barrier(); + uart[UART_TX << shift] = c; ++#endif /* CONFIG_DEBUG_LL */ + } + + static inline void flush(void) +-- +1.6.3.2 + diff --git a/meta/packages/linux/linux-omap3-pm-git/zoom2/0001-OMAP3-MMC-Add-mux-for-pins.patch b/meta/packages/linux/linux-omap3-pm-git/zoom2/0001-OMAP3-MMC-Add-mux-for-pins.patch deleted file mode 100644 index 70db8219a..000000000 --- a/meta/packages/linux/linux-omap3-pm-git/zoom2/0001-OMAP3-MMC-Add-mux-for-pins.patch +++ /dev/null @@ -1,170 +0,0 @@ -From be0e1c0f2f529d6f5adb9c5050731d881874c34b Mon Sep 17 00:00:00 2001 -From: Vikram Pandita -Date: Thu, 18 Jun 2009 13:40:08 -0500 -Subject: [PATCH 1/8] OMAP3: MMC: Add mux for pins - -For OMAP3 add MMC1 MMC2 pin mux - -Signed-off-by: Vikram Pandita -Signed-off-by: Chikkature Rajashekar ---- - arch/arm/mach-omap2/devices.c | 42 ++++++++++++++++++++++++++++ - arch/arm/mach-omap2/mux.c | 49 +++++++++++++++++++++++++++++++++ - arch/arm/plat-omap/include/mach/mux.h | 28 +++++++++++++++++++ - 3 files changed, 119 insertions(+), 0 deletions(-) - -diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c -index 81f47d9..243815e 100644 ---- a/arch/arm/mach-omap2/devices.c -+++ b/arch/arm/mach-omap2/devices.c -@@ -455,6 +455,48 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, - omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0); - } - } -+ -+ if (cpu_is_omap3430()) { -+ if (controller_nr == 0) { -+ omap_cfg_reg(N28_3430_MMC1_CLK); -+ omap_cfg_reg(M27_3430_MMC1_CMD); -+ omap_cfg_reg(N27_3430_MMC1_DAT0); -+ if (mmc_controller->slots[0].wires == 4 || -+ mmc_controller->slots[0].wires == 8) { -+ omap_cfg_reg(N26_3430_MMC1_DAT1); -+ omap_cfg_reg(N25_3430_MMC1_DAT2); -+ omap_cfg_reg(P28_3430_MMC1_DAT3); -+ } -+ if (mmc_controller->slots[0].wires == 8) { -+ omap_cfg_reg(P27_3430_MMC1_DAT4); -+ omap_cfg_reg(P26_3430_MMC1_DAT5); -+ omap_cfg_reg(R27_3430_MMC1_DAT6); -+ omap_cfg_reg(R25_3430_MMC1_DAT7); -+ } -+ } -+ if (controller_nr == 1) { -+ /* MMC2 */ -+ omap_cfg_reg(AE2_3430_MMC2_CLK); -+ omap_cfg_reg(AG5_3430_MMC2_CMD); -+ omap_cfg_reg(AH5_3430_MMC2_DAT0); -+ if (mmc_controller->slots[0].wires == 4 || -+ mmc_controller->slots[0].wires == 8) { -+ omap_cfg_reg(AH4_3430_MMC2_DAT1); -+ omap_cfg_reg(AG4_3430_MMC2_DAT2); -+ omap_cfg_reg(AF4_3430_MMC2_DAT3); -+ } -+ if (mmc_controller->slots[0].wires == 8) -+ printk(KERN_WARNING -+ "\n MMC2: DAT4, DAT5, DAT6, DAT7: " -+ "Setup the mux in board file"); -+ } -+ if (controller_nr == 2) { -+ /* MMC3 */ -+ printk(KERN_WARNING -+ "\n MMC3: Setup the mux in board file: " -+ "Multiple options exist, so is board specific"); -+ } -+ } - } - - #define MAX_OMAP_MMC_HWMOD_NAME_LEN 16 -diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c -index 026c4fc..d49b9a7 100644 ---- a/arch/arm/mach-omap2/mux.c -+++ b/arch/arm/mach-omap2/mux.c -@@ -486,6 +486,55 @@ MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) - MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -+/* MMC1 */ -+MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144, -+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146, -+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148, -+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a, -+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c, -+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e, -+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150, -+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152, -+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154, -+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156, -+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -+ -+/* MMC2 */ -+MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158, -+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A, -+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c, -+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e, -+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160, -+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162, -+ OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -+ -+/* MMC3 */ -+MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8, -+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0, -+ OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4, -+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6, -+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8, -+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -+MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2, -+ OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) - }; - - #define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) -diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h -index 85a6217..d24fdf9 100644 ---- a/arch/arm/plat-omap/include/mach/mux.h -+++ b/arch/arm/plat-omap/include/mach/mux.h -@@ -853,6 +853,34 @@ enum omap34xx_index { - AE5_34XX_GPIO143, - H19_34XX_GPIO164_OUT, - J25_34XX_GPIO170, -+ -+ /* MMC1 */ -+ N28_3430_MMC1_CLK, -+ M27_3430_MMC1_CMD, -+ N27_3430_MMC1_DAT0, -+ N26_3430_MMC1_DAT1, -+ N25_3430_MMC1_DAT2, -+ P28_3430_MMC1_DAT3, -+ P27_3430_MMC1_DAT4, -+ P26_3430_MMC1_DAT5, -+ R27_3430_MMC1_DAT6, -+ R25_3430_MMC1_DAT7, -+ -+ /* MMC2 */ -+ AE2_3430_MMC2_CLK, -+ AG5_3430_MMC2_CMD, -+ AH5_3430_MMC2_DAT0, -+ AH4_3430_MMC2_DAT1, -+ AG4_3430_MMC2_DAT2, -+ AF4_3430_MMC2_DAT3, -+ -+ /* MMC3 */ -+ AF10_3430_MMC3_CLK, -+ AC3_3430_MMC3_CMD, -+ AE11_3430_MMC3_DAT0, -+ AH9_3430_MMC3_DAT1, -+ AF13_3430_MMC3_DAT2, -+ AF13_3430_MMC3_DAT3, - }; - - struct omap_mux_cfg { --- -1.6.3.2 - diff --git a/meta/packages/linux/linux-omap3-pm-git/zoom2/0002-OMAP1-2-3-4-Adapt-board-files-for-cleand-DEBUG_LL-in.patch b/meta/packages/linux/linux-omap3-pm-git/zoom2/0002-OMAP1-2-3-4-Adapt-board-files-for-cleand-DEBUG_LL-in.patch new file mode 100644 index 000000000..8019631b1 --- /dev/null +++ b/meta/packages/linux/linux-omap3-pm-git/zoom2/0002-OMAP1-2-3-4-Adapt-board-files-for-cleand-DEBUG_LL-in.patch @@ -0,0 +1,268 @@ +From 533dc09b3515211d6bee1f63aa3ddd659d0d319c Mon Sep 17 00:00:00 2001 +From: Vikram Pandita +Date: Thu, 20 Aug 2009 16:58:42 -0500 +Subject: [PATCH 2/5] OMAP1/2/3/4: Adapt board files for cleand DEBUG_LL interface + +This patch assigns the physical address of debug uart as defined +in menucoinfig item CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR to phys_io + +The virtual address for io_pg_offset is calculated as per static +mapping + +CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR is a hex value and for boards +like Zoom2, the phy address can be zero, in case debug board +is not attached. + +Signed-off-by: Vikram Pandita +--- + arch/arm/mach-omap2/board-2430sdp.c | 4 ++-- + arch/arm/mach-omap2/board-3430sdp.c | 4 ++-- + arch/arm/mach-omap2/board-4430sdp.c | 4 ++-- + arch/arm/mach-omap2/board-apollon.c | 4 ++-- + arch/arm/mach-omap2/board-generic.c | 4 ++-- + arch/arm/mach-omap2/board-h4.c | 4 ++-- + arch/arm/mach-omap2/board-ldp.c | 4 ++-- + arch/arm/mach-omap2/board-n8x0.c | 12 ++++++------ + arch/arm/mach-omap2/board-omap3beagle.c | 4 ++-- + arch/arm/mach-omap2/board-omap3evm.c | 4 ++-- + arch/arm/mach-omap2/board-omap3pandora.c | 4 ++-- + arch/arm/mach-omap2/board-overo.c | 4 ++-- + arch/arm/mach-omap2/board-rx51.c | 4 ++-- + arch/arm/mach-omap2/board-zoom2.c | 4 ++-- + 14 files changed, 32 insertions(+), 32 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c +index c693668..9ed2f2c 100644 +--- a/arch/arm/mach-omap2/board-2430sdp.c ++++ b/arch/arm/mach-omap2/board-2430sdp.c +@@ -225,8 +225,8 @@ static void __init omap_2430sdp_map_io(void) + + MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") + /* Maintainer: Syed Khasim - Texas Instruments Inc */ +- .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, ++ .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_2430sdp_map_io, + .init_irq = omap_2430sdp_init_irq, +diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c +index c71417f..f085eee 100644 +--- a/arch/arm/mach-omap2/board-3430sdp.c ++++ b/arch/arm/mach-omap2/board-3430sdp.c +@@ -505,8 +505,8 @@ static void __init omap_3430sdp_map_io(void) + + MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") + /* Maintainer: Syed Khasim - Texas Instruments Inc */ +- .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, ++ .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_3430sdp_map_io, + .init_irq = omap_3430sdp_init_irq, +diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c +index 646079f..4c1a166 100644 +--- a/arch/arm/mach-omap2/board-4430sdp.c ++++ b/arch/arm/mach-omap2/board-4430sdp.c +@@ -83,8 +83,8 @@ static void __init omap_4430sdp_map_io(void) + + MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") + /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */ +- .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, ++ .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_4430sdp_map_io, + .init_irq = omap_4430sdp_init_irq, +diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c +index e2947fd..61da659 100644 +--- a/arch/arm/mach-omap2/board-apollon.c ++++ b/arch/arm/mach-omap2/board-apollon.c +@@ -336,8 +336,8 @@ static void __init omap_apollon_map_io(void) + + MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") + /* Maintainer: Kyungmin Park */ +- .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, ++ .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_apollon_map_io, + .init_irq = omap_apollon_init_irq, +diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c +index fc9eccb..6d39eaa 100644 +--- a/arch/arm/mach-omap2/board-generic.c ++++ b/arch/arm/mach-omap2/board-generic.c +@@ -59,8 +59,8 @@ static void __init omap_generic_map_io(void) + + MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") + /* Maintainer: Paul Mundt */ +- .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, ++ .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR - OMAP1_IO_OFFSET) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_generic_map_io, + .init_irq = omap_generic_init_irq, +diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c +index 7eda321..4ce760f 100644 +--- a/arch/arm/mach-omap2/board-h4.c ++++ b/arch/arm/mach-omap2/board-h4.c +@@ -379,8 +379,8 @@ static void __init omap_h4_map_io(void) + + MACHINE_START(OMAP_H4, "OMAP2420 H4 board") + /* Maintainer: Paul Mundt */ +- .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, ++ .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_h4_map_io, + .init_irq = omap_h4_init_irq, +diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c +index 4a4b300..5f06434 100644 +--- a/arch/arm/mach-omap2/board-ldp.c ++++ b/arch/arm/mach-omap2/board-ldp.c +@@ -398,8 +398,8 @@ static void __init omap_ldp_map_io(void) + } + + MACHINE_START(OMAP_LDP, "OMAP LDP board") +- .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, ++ .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_ldp_map_io, + .init_irq = omap_ldp_init_irq, +diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c +index af6fcee..464b432 100644 +--- a/arch/arm/mach-omap2/board-n8x0.c ++++ b/arch/arm/mach-omap2/board-n8x0.c +@@ -125,8 +125,8 @@ static void __init n8x0_init_machine(void) + } + + MACHINE_START(NOKIA_N800, "Nokia N800") +- .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, ++ .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = n8x0_map_io, + .init_irq = n8x0_init_irq, +@@ -135,8 +135,8 @@ MACHINE_START(NOKIA_N800, "Nokia N800") + MACHINE_END + + MACHINE_START(NOKIA_N810, "Nokia N810") +- .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, ++ .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = n8x0_map_io, + .init_irq = n8x0_init_irq, +@@ -145,8 +145,8 @@ MACHINE_START(NOKIA_N810, "Nokia N810") + MACHINE_END + + MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") +- .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, ++ .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = n8x0_map_io, + .init_irq = n8x0_init_irq, +diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c +index 07aee90..4d30948 100644 +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -428,8 +428,8 @@ static void __init omap3_beagle_map_io(void) + + MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") + /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ +- .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, ++ .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_beagle_map_io, + .init_irq = omap3_beagle_init_irq, +diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c +index c0cb29d..8f24dd6 100644 +--- a/arch/arm/mach-omap2/board-omap3evm.c ++++ b/arch/arm/mach-omap2/board-omap3evm.c +@@ -324,8 +324,8 @@ static void __init omap3_evm_map_io(void) + + MACHINE_START(OMAP3EVM, "OMAP3 EVM") + /* Maintainer: Syed Mohammed Khasim - Texas Instruments */ +- .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, ++ .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_evm_map_io, + .init_irq = omap3_evm_init_irq, +diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c +index 1991f19..05d1994 100644 +--- a/arch/arm/mach-omap2/board-omap3pandora.c ++++ b/arch/arm/mach-omap2/board-omap3pandora.c +@@ -412,8 +412,8 @@ static void __init omap3pandora_map_io(void) + } + + MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") +- .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, ++ .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3pandora_map_io, + .init_irq = omap3pandora_init_irq, +diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c +index a9d7c2e..4057a1b 100644 +--- a/arch/arm/mach-omap2/board-overo.c ++++ b/arch/arm/mach-omap2/board-overo.c +@@ -454,8 +454,8 @@ static void __init overo_map_io(void) + } + + MACHINE_START(OVERO, "Gumstix Overo") +- .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, ++ .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = overo_map_io, + .init_irq = overo_init_irq, +diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c +index 8a3dc61..4b97fe8 100644 +--- a/arch/arm/mach-omap2/board-rx51.c ++++ b/arch/arm/mach-omap2/board-rx51.c +@@ -88,8 +88,8 @@ static void __init rx51_map_io(void) + + MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") + /* Maintainer: Lauri Leukkunen */ +- .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, ++ .io_pg_offst = ((CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR + OMAP2_IO_OFFSET) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = rx51_map_io, + .init_irq = rx51_init_irq, +diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c +index 4d295d5..58baee3 100644 +--- a/arch/arm/mach-omap2/board-zoom2.c ++++ b/arch/arm/mach-omap2/board-zoom2.c +@@ -280,8 +280,8 @@ static void __init omap_zoom2_map_io(void) + } + + MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") +- .phys_io = 0x48000000, +- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, ++ .phys_io = CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR, ++ .io_pg_offst = ((ZOOM2_EXT_QUART_VIRT) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_zoom2_map_io, + .init_irq = omap_zoom2_init_irq, +-- +1.6.3.2 + diff --git a/meta/packages/linux/linux-omap3-pm-git/zoom2/0002-OMAP3-Zoom2-Add-TWL4030-support.patch b/meta/packages/linux/linux-omap3-pm-git/zoom2/0002-OMAP3-Zoom2-Add-TWL4030-support.patch deleted file mode 100644 index ed5b4e2df..000000000 --- a/meta/packages/linux/linux-omap3-pm-git/zoom2/0002-OMAP3-Zoom2-Add-TWL4030-support.patch +++ /dev/null @@ -1,281 +0,0 @@ -From b71cd09cefcd54e792a2ac032c3be64a97ef830c Mon Sep 17 00:00:00 2001 -From: Vikram Pandita -Date: Fri, 12 Jun 2009 17:44:07 -0500 -Subject: [PATCH 2/8] OMAP3:Zoom2: Add TWL4030 support - -Add TWL4030 CORE and TWL4030 drivers to Zoom2 board file -TWL drivers enabled are: - bci - madc - usb - keypad - mmc - -Signed-off-by: Vikram Pandita ---- - arch/arm/mach-omap2/board-zoom2.c | 204 +++++++++++++++++++++++++++++++++++-- - 1 files changed, 193 insertions(+), 11 deletions(-) - -diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c -index 0ec2023..e4bf50a 100644 ---- a/arch/arm/mach-omap2/board-zoom2.c -+++ b/arch/arm/mach-omap2/board-zoom2.c -@@ -12,18 +12,85 @@ - #include - #include - #include -+#include - #include - #include -+#include - - #include - #include - - #include - #include -+#include - - #include "mmc-twl4030.h" - #include "omap3-opp.h" - -+/* Zoom2 has Qwerty keyboard*/ -+static int zoom2_twl4030_keymap[] = { -+ KEY(0, 0, KEY_E), -+ KEY(1, 0, KEY_R), -+ KEY(2, 0, KEY_T), -+ KEY(3, 0, KEY_HOME), -+ KEY(6, 0, KEY_I), -+ KEY(7, 0, KEY_LEFTSHIFT), -+ KEY(0, 1, KEY_D), -+ KEY(1, 1, KEY_F), -+ KEY(2, 1, KEY_G), -+ KEY(3, 1, KEY_SEND), -+ KEY(6, 1, KEY_K), -+ KEY(7, 1, KEY_ENTER), -+ KEY(0, 2, KEY_X), -+ KEY(1, 2, KEY_C), -+ KEY(2, 2, KEY_V), -+ KEY(3, 2, KEY_END), -+ KEY(6, 2, KEY_DOT), -+ KEY(7, 2, KEY_CAPSLOCK), -+ KEY(0, 3, KEY_Z), -+ KEY(1, 3, KEY_KPPLUS), -+ KEY(2, 3, KEY_B), -+ KEY(3, 3, KEY_F1), -+ KEY(6, 3, KEY_O), -+ KEY(7, 3, KEY_SPACE), -+ KEY(0, 4, KEY_W), -+ KEY(1, 4, KEY_Y), -+ KEY(2, 4, KEY_U), -+ KEY(3, 4, KEY_F2), -+ KEY(4, 4, KEY_VOLUMEUP), -+ KEY(6, 4, KEY_L), -+ KEY(7, 4, KEY_LEFT), -+ KEY(0, 5, KEY_S), -+ KEY(1, 5, KEY_H), -+ KEY(2, 5, KEY_J), -+ KEY(3, 5, KEY_F3), -+ KEY(5, 5, KEY_VOLUMEDOWN), -+ KEY(6, 5, KEY_M), -+ KEY(4, 5, KEY_ENTER), -+ KEY(7, 5, KEY_RIGHT), -+ KEY(0, 6, KEY_Q), -+ KEY(1, 6, KEY_A), -+ KEY(2, 6, KEY_N), -+ KEY(3, 6, KEY_BACKSPACE), -+ KEY(6, 6, KEY_P), -+ KEY(7, 6, KEY_UP), -+ KEY(6, 7, KEY_SELECT), -+ KEY(7, 7, KEY_DOWN), -+ KEY(0, 7, KEY_PROG1), /*MACRO 1 */ -+ KEY(1, 7, KEY_PROG2), /*MACRO 2 */ -+ KEY(2, 7, KEY_PROG3), /*MACRO 3 */ -+ KEY(3, 7, KEY_PROG4), /*MACRO 4 */ -+ 0 -+}; -+ -+static struct twl4030_keypad_data zoom2_kp_twl4030_data = { -+ .rows = 8, -+ .cols = 8, -+ .keymap = zoom2_twl4030_keymap, -+ .keymapsize = ARRAY_SIZE(zoom2_twl4030_keymap), -+ .rep = 1, -+}; -+ - static struct omap_uart_config zoom2_uart_config __initdata = { - .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), - }; -@@ -42,10 +109,128 @@ static void __init omap_zoom2_init_irq(void) - omap_gpio_init(); - } - -+ -+static struct regulator_consumer_supply zoom2_vmmc1_supply = { -+ .supply = "vmmc", -+}; -+ -+static struct regulator_consumer_supply zoom2_vsim_supply = { -+ .supply = "vmmc_aux", -+}; -+ -+static struct regulator_consumer_supply zoom2_vmmc2_supply = { -+ .supply = "vmmc", -+}; -+ -+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -+static struct regulator_init_data zoom2_vmmc1 = { -+ .constraints = { -+ .min_uV = 1850000, -+ .max_uV = 3150000, -+ .valid_modes_mask = REGULATOR_MODE_NORMAL -+ | REGULATOR_MODE_STANDBY, -+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE -+ | REGULATOR_CHANGE_MODE -+ | REGULATOR_CHANGE_STATUS, -+ }, -+ .num_consumer_supplies = 1, -+ .consumer_supplies = &zoom2_vmmc1_supply, -+}; -+ -+/* VMMC2 for MMC2 card */ -+static struct regulator_init_data zoom2_vmmc2 = { -+ .constraints = { -+ .min_uV = 1850000, -+ .max_uV = 1850000, -+ .apply_uV = true, -+ .valid_modes_mask = REGULATOR_MODE_NORMAL -+ | REGULATOR_MODE_STANDBY, -+ .valid_ops_mask = REGULATOR_CHANGE_MODE -+ | REGULATOR_CHANGE_STATUS, -+ }, -+ .num_consumer_supplies = 1, -+ .consumer_supplies = &zoom2_vmmc2_supply, -+}; -+ -+/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ -+static struct regulator_init_data zoom2_vsim = { -+ .constraints = { -+ .min_uV = 1800000, -+ .max_uV = 3000000, -+ .valid_modes_mask = REGULATOR_MODE_NORMAL -+ | REGULATOR_MODE_STANDBY, -+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE -+ | REGULATOR_CHANGE_MODE -+ | REGULATOR_CHANGE_STATUS, -+ }, -+ .num_consumer_supplies = 1, -+ .consumer_supplies = &zoom2_vsim_supply, -+}; -+ -+static struct twl4030_hsmmc_info mmc[] __initdata = { -+ { -+ .mmc = 1, -+ .wires = 4, -+ .gpio_wp = -EINVAL, -+ }, -+ { -+ .mmc = 2, -+ .wires = 4, -+ .gpio_wp = -EINVAL, -+ }, -+ {} /* Terminator */ -+}; -+ -+static int zoom2_twl_gpio_setup(struct device *dev, -+ unsigned gpio, unsigned ngpio) -+{ -+ /* gpio + 0 is "mmc0_cd" (input/IRQ), -+ * gpio + 1 is "mmc1_cd" (input/IRQ) -+ */ -+ mmc[0].gpio_cd = gpio + 0; -+ mmc[1].gpio_cd = gpio + 1; -+ twl4030_mmc_init(mmc); -+ -+ /* link regulators to MMC adapters ... we "know" the -+ * regulators will be set up only *after* we return. -+ */ -+ zoom2_vmmc1_supply.dev = mmc[0].dev; -+ zoom2_vsim_supply.dev = mmc[0].dev; -+ zoom2_vmmc2_supply.dev = mmc[1].dev; -+ -+ return 0; -+} -+ -+ -+static int zoom2_batt_table[] = { -+/* 0 C*/ -+30800, 29500, 28300, 27100, -+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, -+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, -+11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, -+8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, -+5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, -+4040, 3910, 3790, 3670, 3550 -+}; -+ -+static struct twl4030_bci_platform_data zoom2_bci_data = { -+ .battery_tmp_tbl = zoom2_batt_table, -+ .tblsize = ARRAY_SIZE(zoom2_batt_table), -+}; -+ -+static struct twl4030_usb_data zoom2_usb_data = { -+ .usb_mode = T2_USB_MODE_ULPI, -+}; -+ - static struct twl4030_gpio_platform_data zoom2_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, -+ .setup = zoom2_twl_gpio_setup, -+}; -+ -+static struct twl4030_madc_platform_data zoom2_madc_data = { -+ .irq_line = 1, - }; - - static struct twl4030_platform_data zoom2_twldata = { -@@ -53,7 +238,15 @@ static struct twl4030_platform_data zoom2_twldata = { - .irq_end = TWL4030_IRQ_END, - - /* platform_data for children goes here */ -+ .bci = &zoom2_bci_data, -+ .madc = &zoom2_madc_data, -+ .usb = &zoom2_usb_data, - .gpio = &zoom2_gpio_data, -+ .keypad = &zoom2_kp_twl4030_data, -+ .vmmc1 = &zoom2_vmmc1, -+ .vmmc2 = &zoom2_vmmc2, -+ .vsim = &zoom2_vsim, -+ - }; - - static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = { -@@ -74,16 +267,6 @@ static int __init omap_i2c_init(void) - return 0; - } - --static struct twl4030_hsmmc_info mmc[] __initdata = { -- { -- .mmc = 1, -- .wires = 4, -- .gpio_cd = -EINVAL, -- .gpio_wp = -EINVAL, -- }, -- {} /* Terminator */ --}; -- - extern int __init omap_zoom2_debugboard_init(void); - - static void __init omap_zoom2_init(void) -@@ -91,7 +274,6 @@ static void __init omap_zoom2_init(void) - omap_i2c_init(); - omap_serial_init(); - omap_zoom2_debugboard_init(); -- twl4030_mmc_init(mmc); - usb_musb_init(); - } - --- -1.6.3.2 - diff --git a/meta/packages/linux/linux-omap3-pm-git/zoom2/0003-OMAP-Zoom2-Add-DEBUG_LL-interface-using-external-Qua.patch b/meta/packages/linux/linux-omap3-pm-git/zoom2/0003-OMAP-Zoom2-Add-DEBUG_LL-interface-using-external-Qua.patch new file mode 100644 index 000000000..e39090f6c --- /dev/null +++ b/meta/packages/linux/linux-omap3-pm-git/zoom2/0003-OMAP-Zoom2-Add-DEBUG_LL-interface-using-external-Qua.patch @@ -0,0 +1,171 @@ +From 98d46e88ffe23a9adcf6ae1acf19b210d5ac3737 Mon Sep 17 00:00:00 2001 +From: Vikram Pandita +Date: Thu, 20 Aug 2009 17:16:24 -0500 +Subject: [PATCH 3/5] OMAP: Zoom2: Add DEBUG_LL interface using external Quart + +This patch adds DEBUG_LL interface for Zoom2 board. +The low level debug uart now points corrctly to External Quad uart +controller on detachable debug board. + +The Quad uart is available over GPMC chip select with physical address +0x10000000. + +This physical address has been mapped to virtual address 0xFB000000 +as per static mapping. + +Also the register accesses to Quad uart have a requirement of shift=1 +based on the h/w mapping of the registers + +This patch is adapted from a version by Erik Gilling: +http://android.git.kernel.org/?p=kernel/omap.git; +a=commit;h=e9d72efdd88877d2d6ea74a08983ace0dcc771d3 + +Signed-off-by: Vikram Pandita +Cc: Erik Gilling +--- + arch/arm/mach-omap2/board-zoom-debugboard.c | 5 +++-- + arch/arm/mach-omap2/board-zoom2.c | 15 +++++++++++++++ + arch/arm/plat-omap/include/mach/debug-macro.S | 14 ++++++++++++-- + arch/arm/plat-omap/include/mach/io.h | 6 ++++++ + arch/arm/plat-omap/include/mach/uncompress.h | 7 +++++++ + 5 files changed, 43 insertions(+), 4 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c +index f546063..f8b0726 100644 +--- a/arch/arm/mach-omap2/board-zoom-debugboard.c ++++ b/arch/arm/mach-omap2/board-zoom-debugboard.c +@@ -82,9 +82,10 @@ static inline void __init zoom2_init_smsc911x(void) + + static struct plat_serial8250_port serial_platform_data[] = { + { +- .mapbase = 0x10000000, ++ .membase = IOMEM(ZOOM2_EXT_QUART_VIRT), ++ .mapbase = ZOOM2_EXT_QUART_PHYS, + .irq = OMAP_GPIO_IRQ(102), +- .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ, ++ .flags = UPF_BOOT_AUTOCONF|UPF_SHARE_IRQ, + .irqflags = IRQF_SHARED | IRQF_TRIGGER_RISING, + .iotype = UPIO_MEM, + .regshift = 1, +diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c +index 58baee3..fc27b07 100644 +--- a/arch/arm/mach-omap2/board-zoom2.c ++++ b/arch/arm/mach-omap2/board-zoom2.c +@@ -16,9 +16,11 @@ + #include + #include + #include ++#include + + #include + #include ++#include + + #include + #include +@@ -273,9 +275,22 @@ static void __init omap_zoom2_init(void) + usb_musb_init(); + } + ++static struct map_desc zoom2_io_desc[] __initdata = { ++ { ++ .virtual = ZOOM2_EXT_QUART_VIRT, ++ .pfn = __phys_to_pfn(ZOOM2_EXT_QUART_PHYS), ++ .length = ZOOM2_EXT_QUART_SIZE, ++ .type = MT_DEVICE ++ } ++}; ++ + static void __init omap_zoom2_map_io(void) + { + omap2_set_globals_343x(); ++ ++ /* Map external quad UART virt to phy mapping */ ++ iotable_init(zoom2_io_desc, ARRAY_SIZE(zoom2_io_desc)); ++ + omap2_map_common_io(); + } + +diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S +index f546d6c..a97f2fb 100644 +--- a/arch/arm/plat-omap/include/mach/debug-macro.S ++++ b/arch/arm/plat-omap/include/mach/debug-macro.S +@@ -12,6 +12,14 @@ + */ + #include "io.h" + ++#if (CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR == 0x10000000) ++#define REGSHIFT 1 ++#define UART_VIRT_TO_PHY_OFFSET ZOOM2_EXT_QUART_PHY_TO_VIRT_OFF ++#else ++#define REGSHIFT 2 ++#define UART_VIRT_TO_PHY_OFFSET OMAP2_IO_OFFSET ++#endif ++ + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? +@@ -22,7 +30,7 @@ + #else + /* omap2/omap3/omap4 */ + ldr \rx, =CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR @ physical base address +- orrne \rx, \rx, #OMAP2_IO_OFFSET @ virtual base ++ orrne \rx, \rx, #UART_VIRT_TO_PHY_OFFSET @ virtual base + #endif + .endm + +@@ -31,13 +39,15 @@ + .endm + + .macro busyuart,rd,rx +-1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends ++1001: ldrb \rd, [\rx, #(0x5 << REGSHIFT)] @ OMAP-1510 and friends + and \rd, \rd, #0x60 + teq \rd, #0x60 ++#if (CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR != 0x10000000) + beq 1002f + ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only + and \rd, \rd, #0x60 + teq \rd, #0x60 ++#endif + bne 1001b + 1002: + .endm +diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h +index 8d32df3..97702e6 100644 +--- a/arch/arm/plat-omap/include/mach/io.h ++++ b/arch/arm/plat-omap/include/mach/io.h +@@ -169,6 +169,12 @@ + #define DSP_MMU_34XX_VIRT 0xe2000000 + #define DSP_MMU_34XX_SIZE SZ_4K + ++/* Map External Quad UART for Zoom2 board */ ++#define ZOOM2_EXT_QUART_PHYS 0x10000000 /* PHY address if fixed */ ++#define ZOOM2_EXT_QUART_PHY_TO_VIRT_OFF 0xeb000000 ++#define ZOOM2_EXT_QUART_VIRT 0xfb000000 ++#define ZOOM2_EXT_QUART_SIZE SZ_16 ++ + /* + * ---------------------------------------------------------------------------- + * Omap4 specific IO mapping +diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h +index 0e21eb3..959195a 100644 +--- a/arch/arm/plat-omap/include/mach/uncompress.h ++++ b/arch/arm/plat-omap/include/mach/uncompress.h +@@ -41,6 +41,13 @@ static void putc(int c) + #if defined(CONFIG_DEBUG_LL) + uart = (volatile u8 *)(CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR); + ++#if (CONFIG_OMAP_DEBUG_LL_UART_PHY_ADDR == 0x10000000) ++ /* External UART has a shift=1 requirement ++ * Internal OMAP UARTs have shift=2 requirement ++ */ ++ shift = 1; ++#endif ++ + #ifdef CONFIG_ARCH_OMAP1 + /* Determine which serial port to use */ + do { +-- +1.6.3.2 + diff --git a/meta/packages/linux/linux-omap3-pm-git/zoom2/0003-OMAP3-Zoom2-Update-board-defconfig.patch b/meta/packages/linux/linux-omap3-pm-git/zoom2/0003-OMAP3-Zoom2-Update-board-defconfig.patch deleted file mode 100644 index a2e89e280..000000000 --- a/meta/packages/linux/linux-omap3-pm-git/zoom2/0003-OMAP3-Zoom2-Update-board-defconfig.patch +++ /dev/null @@ -1,1102 +0,0 @@ -From 6ee03ed1dc74b4e777d65c73b7ef9c0222fc98a8 Mon Sep 17 00:00:00 2001 -From: Vikram Pandita -Date: Fri, 12 Jun 2009 17:47:38 -0500 -Subject: [PATCH 3/8] OMAP3:Zoom2: Update board defconfig - -Update defconfig for Zoom2 to include -TWL4030 core -TWL4030 drivers (bci, gpio, keypad, usb, mmc) - -Also sync the defconfig after issuing a menuconfig - -Signed-off-by: Vikram Pandita ---- - arch/arm/configs/omap_zoom2_defconfig | 484 +++++++++++++++++++++++++++----- - 1 files changed, 408 insertions(+), 76 deletions(-) - -diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig -index 213fe9c..f1739fa 100644 ---- a/arch/arm/configs/omap_zoom2_defconfig -+++ b/arch/arm/configs/omap_zoom2_defconfig -@@ -1,7 +1,7 @@ - # - # Automatically generated make config: don't edit --# Linux kernel version: 2.6.27-rc5 --# Fri Oct 10 11:49:41 2008 -+# Linux kernel version: 2.6.30-omap1 -+# Fri Jun 12 17:25:46 2009 - # - CONFIG_ARM=y - CONFIG_SYS_SUPPORTS_APM_EMULATION=y -@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y - # CONFIG_ARCH_HAS_ILOG2_U64 is not set - CONFIG_GENERIC_HWEIGHT=y - CONFIG_GENERIC_CALIBRATE_DELAY=y --CONFIG_ARCH_SUPPORTS_AOUT=y --CONFIG_ZONE_DMA=y - CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y - CONFIG_VECTORS_BASE=0xffff0000 - CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -@@ -39,44 +37,61 @@ CONFIG_LOCALVERSION_AUTO=y - CONFIG_SWAP=y - CONFIG_SYSVIPC=y - CONFIG_SYSVIPC_SYSCTL=y -+# CONFIG_POSIX_MQUEUE is not set - CONFIG_BSD_PROCESS_ACCT=y - # CONFIG_BSD_PROCESS_ACCT_V3 is not set -+# CONFIG_TASKSTATS is not set -+# CONFIG_AUDIT is not set -+ -+# -+# RCU Subsystem -+# -+CONFIG_CLASSIC_RCU=y -+# CONFIG_TREE_RCU is not set -+# CONFIG_PREEMPT_RCU is not set -+# CONFIG_TREE_RCU_TRACE is not set -+# CONFIG_PREEMPT_RCU_TRACE is not set - # CONFIG_IKCONFIG is not set - CONFIG_LOG_BUF_SHIFT=14 --# CONFIG_CGROUPS is not set - CONFIG_GROUP_SCHED=y - CONFIG_FAIR_GROUP_SCHED=y - # CONFIG_RT_GROUP_SCHED is not set - CONFIG_USER_SCHED=y - # CONFIG_CGROUP_SCHED is not set -+# CONFIG_CGROUPS is not set - CONFIG_SYSFS_DEPRECATED=y - CONFIG_SYSFS_DEPRECATED_V2=y - # CONFIG_RELAY is not set - # CONFIG_NAMESPACES is not set - CONFIG_BLK_DEV_INITRD=y - CONFIG_INITRAMFS_SOURCE="" -+CONFIG_RD_GZIP=y -+# CONFIG_RD_BZIP2 is not set -+# CONFIG_RD_LZMA is not set - CONFIG_CC_OPTIMIZE_FOR_SIZE=y - CONFIG_SYSCTL=y -+CONFIG_ANON_INODES=y - CONFIG_EMBEDDED=y - CONFIG_UID16=y - # CONFIG_SYSCTL_SYSCALL is not set - CONFIG_KALLSYMS=y - # CONFIG_KALLSYMS_ALL is not set - CONFIG_KALLSYMS_EXTRA_PASS=y -+# CONFIG_STRIP_ASM_SYMS is not set - CONFIG_HOTPLUG=y - CONFIG_PRINTK=y - CONFIG_BUG=y - CONFIG_ELF_CORE=y --CONFIG_COMPAT_BRK=y - CONFIG_BASE_FULL=y - CONFIG_FUTEX=y --CONFIG_ANON_INODES=y - CONFIG_EPOLL=y - CONFIG_SIGNALFD=y - CONFIG_TIMERFD=y - CONFIG_EVENTFD=y - CONFIG_SHMEM=y -+CONFIG_AIO=y - CONFIG_VM_EVENT_COUNTERS=y -+CONFIG_COMPAT_BRK=y - CONFIG_SLAB=y - # CONFIG_SLUB is not set - # CONFIG_SLOB is not set -@@ -84,19 +99,13 @@ CONFIG_SLAB=y - # CONFIG_MARKERS is not set - CONFIG_HAVE_OPROFILE=y - # CONFIG_KPROBES is not set --# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set --# CONFIG_HAVE_IOREMAP_PROT is not set - CONFIG_HAVE_KPROBES=y - CONFIG_HAVE_KRETPROBES=y --# CONFIG_HAVE_ARCH_TRACEHOOK is not set --# CONFIG_HAVE_DMA_ATTRS is not set --# CONFIG_USE_GENERIC_SMP_HELPERS is not set - CONFIG_HAVE_CLK=y --CONFIG_PROC_PAGE_MONITOR=y -+# CONFIG_SLOW_WORK is not set - CONFIG_HAVE_GENERIC_DMA_COHERENT=y - CONFIG_SLABINFO=y - CONFIG_RT_MUTEXES=y --# CONFIG_TINY_SHMEM is not set - CONFIG_BASE_SMALL=0 - CONFIG_MODULES=y - # CONFIG_MODULE_FORCE_LOAD is not set -@@ -104,11 +113,8 @@ CONFIG_MODULE_UNLOAD=y - # CONFIG_MODULE_FORCE_UNLOAD is not set - CONFIG_MODVERSIONS=y - CONFIG_MODULE_SRCVERSION_ALL=y --CONFIG_KMOD=y - CONFIG_BLOCK=y - # CONFIG_LBD is not set --# CONFIG_BLK_DEV_IO_TRACE is not set --# CONFIG_LSF is not set - # CONFIG_BLK_DEV_BSG is not set - # CONFIG_BLK_DEV_INTEGRITY is not set - -@@ -124,7 +130,7 @@ CONFIG_DEFAULT_AS=y - # CONFIG_DEFAULT_CFQ is not set - # CONFIG_DEFAULT_NOOP is not set - CONFIG_DEFAULT_IOSCHED="anticipatory" --CONFIG_CLASSIC_RCU=y -+CONFIG_FREEZER=y - - # - # System Type -@@ -134,10 +140,10 @@ CONFIG_CLASSIC_RCU=y - # CONFIG_ARCH_REALVIEW is not set - # CONFIG_ARCH_VERSATILE is not set - # CONFIG_ARCH_AT91 is not set --# CONFIG_ARCH_CLPS7500 is not set - # CONFIG_ARCH_CLPS711X is not set - # CONFIG_ARCH_EBSA110 is not set - # CONFIG_ARCH_EP93XX is not set -+# CONFIG_ARCH_GEMINI is not set - # CONFIG_ARCH_FOOTBRIDGE is not set - # CONFIG_ARCH_NETX is not set - # CONFIG_ARCH_H720X is not set -@@ -158,14 +164,17 @@ CONFIG_CLASSIC_RCU=y - # CONFIG_ARCH_ORION5X is not set - # CONFIG_ARCH_PNX4008 is not set - # CONFIG_ARCH_PXA is not set -+# CONFIG_ARCH_MMP is not set - # CONFIG_ARCH_RPC is not set - # CONFIG_ARCH_SA1100 is not set - # CONFIG_ARCH_S3C2410 is not set -+# CONFIG_ARCH_S3C64XX is not set - # CONFIG_ARCH_SHARK is not set - # CONFIG_ARCH_LH7A40X is not set - # CONFIG_ARCH_DAVINCI is not set - CONFIG_ARCH_OMAP=y --# CONFIG_ARCH_MSM7X00A is not set -+# CONFIG_ARCH_MSM is not set -+# CONFIG_ARCH_W90X900 is not set - - # - # TI OMAP Implementations -@@ -174,6 +183,7 @@ CONFIG_ARCH_OMAP_OTG=y - # CONFIG_ARCH_OMAP1 is not set - # CONFIG_ARCH_OMAP2 is not set - CONFIG_ARCH_OMAP3=y -+# CONFIG_ARCH_OMAP4 is not set - - # - # OMAP Feature Selections -@@ -185,6 +195,7 @@ CONFIG_OMAP_MUX=y - CONFIG_OMAP_MUX_DEBUG=y - CONFIG_OMAP_MUX_WARNINGS=y - CONFIG_OMAP_MCBSP=y -+# CONFIG_OMAP_MBOX_FWK is not set - # CONFIG_OMAP_MPU_TIMER is not set - CONFIG_OMAP_32K_TIMER=y - CONFIG_OMAP_32K_TIMER_HZ=128 -@@ -192,25 +203,20 @@ CONFIG_OMAP_DM_TIMER=y - # CONFIG_OMAP_LL_DEBUG_UART1 is not set - # CONFIG_OMAP_LL_DEBUG_UART2 is not set - CONFIG_OMAP_LL_DEBUG_UART3=y --CONFIG_OMAP_SERIAL_WAKE=y - CONFIG_ARCH_OMAP34XX=y - CONFIG_ARCH_OMAP3430=y - - # - # OMAP Board Type - # --# CONFIG_MACH_OMAP3_BEAGLE is not set -+# CONFIG_MACH_NOKIA_RX51 is not set - # CONFIG_MACH_OMAP_LDP is not set --CONFIG_MACH_OMAP_ZOOM2=y -+# CONFIG_MACH_OMAP_3430SDP is not set -+# CONFIG_MACH_OMAP3EVM is not set -+# CONFIG_MACH_OMAP3_BEAGLE is not set - # CONFIG_MACH_OVERO is not set -- --# --# Boot options --# -- --# --# Power management --# -+# CONFIG_MACH_OMAP3_PANDORA is not set -+CONFIG_MACH_OMAP_ZOOM2=y - - # - # Processor Type -@@ -239,6 +245,10 @@ CONFIG_ARM_THUMB=y - # CONFIG_CPU_BPREDICT_DISABLE is not set - CONFIG_HAS_TLS_REG=y - # CONFIG_OUTER_CACHE is not set -+# CONFIG_ARM_ERRATA_430973 is not set -+# CONFIG_ARM_ERRATA_458693 is not set -+# CONFIG_ARM_ERRATA_460075 is not set -+CONFIG_COMMON_CLKDEV=y - - # - # Bus support -@@ -254,26 +264,32 @@ CONFIG_TICK_ONESHOT=y - CONFIG_NO_HZ=y - CONFIG_HIGH_RES_TIMERS=y - CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -+CONFIG_VMSPLIT_3G=y -+# CONFIG_VMSPLIT_2G is not set -+# CONFIG_VMSPLIT_1G is not set -+CONFIG_PAGE_OFFSET=0xC0000000 - # CONFIG_PREEMPT is not set - CONFIG_HZ=128 - CONFIG_AEABI=y - CONFIG_OABI_COMPAT=y --CONFIG_ARCH_FLATMEM_HAS_HOLES=y --# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set -+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -+# CONFIG_HIGHMEM is not set - CONFIG_SELECT_MEMORY_MODEL=y - CONFIG_FLATMEM_MANUAL=y - # CONFIG_DISCONTIGMEM_MANUAL is not set - # CONFIG_SPARSEMEM_MANUAL is not set - CONFIG_FLATMEM=y - CONFIG_FLAT_NODE_MEM_MAP=y --# CONFIG_SPARSEMEM_STATIC is not set --# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set - CONFIG_PAGEFLAGS_EXTENDED=y - CONFIG_SPLIT_PTLOCK_CPUS=4 --# CONFIG_RESOURCES_64BIT is not set --CONFIG_ZONE_DMA_FLAG=1 --CONFIG_BOUNCE=y -+# CONFIG_PHYS_ADDR_T_64BIT is not set -+CONFIG_ZONE_DMA_FLAG=0 - CONFIG_VIRT_TO_BUS=y -+CONFIG_UNEVICTABLE_LRU=y -+CONFIG_HAVE_MLOCK=y -+CONFIG_HAVE_MLOCKED_PAGE_BIT=y - # CONFIG_LEDS is not set - CONFIG_ALIGNMENT_TRAP=y - -@@ -287,9 +303,10 @@ CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.16 - # CONFIG_KEXEC is not set - - # --# CPU Frequency scaling -+# CPU Power Management - # - # CONFIG_CPU_FREQ is not set -+# CONFIG_CPU_IDLE is not set - - # - # Floating point emulation -@@ -309,13 +326,23 @@ CONFIG_VFPv3=y - # Userspace binary formats - # - CONFIG_BINFMT_ELF=y -+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -+CONFIG_HAVE_AOUT=y - # CONFIG_BINFMT_AOUT is not set - CONFIG_BINFMT_MISC=y - - # - # Power management options - # --# CONFIG_PM is not set -+CONFIG_PM=y -+CONFIG_PM_DEBUG=y -+CONFIG_PM_VERBOSE=y -+CONFIG_CAN_PM_TRACE=y -+CONFIG_PM_SLEEP=y -+CONFIG_SUSPEND=y -+# CONFIG_PM_TEST_SUSPEND is not set -+CONFIG_SUSPEND_FREEZER=y -+# CONFIG_APM_EMULATION is not set - CONFIG_ARCH_SUSPEND_POSSIBLE=y - CONFIG_NET=y - -@@ -378,7 +405,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" - # CONFIG_LAPB is not set - # CONFIG_ECONET is not set - # CONFIG_WAN_ROUTER is not set -+# CONFIG_PHONET is not set - # CONFIG_NET_SCHED is not set -+# CONFIG_DCB is not set - - # - # Network testing -@@ -389,8 +418,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" - # CONFIG_IRDA is not set - # CONFIG_BT is not set - # CONFIG_AF_RXRPC is not set --# CONFIG_PHONET is not set - # CONFIG_WIRELESS is not set -+# CONFIG_WIMAX is not set - # CONFIG_RFKILL is not set - # CONFIG_NET_9P is not set - -@@ -416,14 +445,28 @@ CONFIG_BLK_DEV=y - # CONFIG_BLK_DEV_COW_COMMON is not set - CONFIG_BLK_DEV_LOOP=y - # CONFIG_BLK_DEV_CRYPTOLOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_UB is not set - CONFIG_BLK_DEV_RAM=y - CONFIG_BLK_DEV_RAM_COUNT=16 - CONFIG_BLK_DEV_RAM_SIZE=16384 - # CONFIG_BLK_DEV_XIP is not set - # CONFIG_CDROM_PKTCDVD is not set -+# CONFIG_ATA_OVER_ETH is not set - CONFIG_MISC_DEVICES=y --# CONFIG_EEPROM_93CX6 is not set -+# CONFIG_ICS932S401 is not set -+# CONFIG_OMAP_STI is not set - # CONFIG_ENCLOSURE_SERVICES is not set -+# CONFIG_ISL29003 is not set -+# CONFIG_C2PORT is not set -+ -+# -+# EEPROM support -+# -+# CONFIG_EEPROM_AT24 is not set -+# CONFIG_EEPROM_AT25 is not set -+# CONFIG_EEPROM_LEGACY is not set -+# CONFIG_EEPROM_93CX6 is not set - CONFIG_HAVE_IDE=y - # CONFIG_IDE is not set - -@@ -461,14 +504,20 @@ CONFIG_SCSI_WAIT_SCAN=m - # - # CONFIG_SCSI_SPI_ATTRS is not set - # CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set - # CONFIG_SCSI_SAS_LIBSAS is not set - # CONFIG_SCSI_SRP_ATTRS is not set - CONFIG_SCSI_LOWLEVEL=y -+# CONFIG_ISCSI_TCP is not set -+# CONFIG_LIBFC is not set -+# CONFIG_LIBFCOE is not set - # CONFIG_SCSI_DEBUG is not set - # CONFIG_SCSI_DH is not set -+# CONFIG_SCSI_OSD_INITIATOR is not set - # CONFIG_ATA is not set - # CONFIG_MD is not set - CONFIG_NETDEVICES=y -+CONFIG_COMPAT_NET_DEV_OPS=y - # CONFIG_DUMMY is not set - # CONFIG_BONDING is not set - # CONFIG_MACVLAN is not set -@@ -501,8 +550,10 @@ CONFIG_MII=y - # CONFIG_SMC91X is not set - # CONFIG_DM9000 is not set - # CONFIG_ENC28J60 is not set -+# CONFIG_ETHOC is not set - # CONFIG_SMC911X is not set - CONFIG_SMSC911X=y -+# CONFIG_DNET is not set - # CONFIG_IBM_NEW_EMAC_ZMII is not set - # CONFIG_IBM_NEW_EMAC_RGMII is not set - # CONFIG_IBM_NEW_EMAC_TAH is not set -@@ -519,7 +570,10 @@ CONFIG_NETDEV_10000=y - # - # CONFIG_WLAN_PRE80211 is not set - # CONFIG_WLAN_80211 is not set --# CONFIG_IWLWIFI_LEDS is not set -+ -+# -+# Enable WiMAX (Networking options) to see the WiMAX drivers -+# - - # - # USB Network Adapters -@@ -561,17 +615,25 @@ CONFIG_INPUT_EVDEV=y - # CONFIG_INPUT_TABLET is not set - CONFIG_INPUT_TOUCHSCREEN=y - CONFIG_TOUCHSCREEN_ADS7846=y -+# CONFIG_TOUCHSCREEN_AD7877 is not set -+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set -+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set -+# CONFIG_TOUCHSCREEN_AD7879 is not set - # CONFIG_TOUCHSCREEN_FUJITSU is not set - # CONFIG_TOUCHSCREEN_GUNZE is not set - # CONFIG_TOUCHSCREEN_ELO is not set -+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set - # CONFIG_TOUCHSCREEN_MTOUCH is not set - # CONFIG_TOUCHSCREEN_INEXIO is not set - # CONFIG_TOUCHSCREEN_MK712 is not set - # CONFIG_TOUCHSCREEN_PENMOUNT is not set - # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set - # CONFIG_TOUCHSCREEN_TOUCHWIN is not set --# CONFIG_TOUCHSCREEN_UCB1400 is not set -+# CONFIG_TOUCHSCREEN_TSC2005 is not set -+# CONFIG_TOUCHSCREEN_TSC210X is not set -+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set - # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -+# CONFIG_TOUCHSCREEN_TSC2007 is not set - # CONFIG_INPUT_MISC is not set - - # -@@ -607,13 +669,15 @@ CONFIG_SERIAL_8250_RSA=y - # - # Non-8250 serial port support - # -+# CONFIG_SERIAL_MAX3100 is not set - CONFIG_SERIAL_CORE=y - CONFIG_SERIAL_CORE_CONSOLE=y - CONFIG_UNIX98_PTYS=y -+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set - # CONFIG_LEGACY_PTYS is not set - # CONFIG_IPMI_HANDLER is not set - CONFIG_HW_RANDOM=y --# CONFIG_NVRAM is not set -+# CONFIG_HW_RANDOM_TIMERIOMEM is not set - # CONFIG_R3964 is not set - # CONFIG_RAW_DRIVER is not set - # CONFIG_TCG_TPM is not set -@@ -639,6 +703,7 @@ CONFIG_I2C_OMAP=y - # - # CONFIG_I2C_PARPORT_LIGHT is not set - # CONFIG_I2C_TAOS_EVM is not set -+# CONFIG_I2C_TINY_USB is not set - - # - # Other I2C/SMBus bus drivers -@@ -650,14 +715,11 @@ CONFIG_I2C_OMAP=y - # Miscellaneous I2C Chip support - # - # CONFIG_DS1682 is not set --# CONFIG_EEPROM_AT24 is not set --# CONFIG_EEPROM_LEGACY is not set - # CONFIG_SENSORS_PCF8574 is not set - # CONFIG_PCF8575 is not set - # CONFIG_SENSORS_PCA9539 is not set --# CONFIG_SENSORS_PCF8591 is not set --# CONFIG_ISP1301_OMAP is not set --# CONFIG_TPS65010 is not set -+# CONFIG_TWL4030_MADC is not set -+# CONFIG_TWL4030_POWEROFF is not set - # CONFIG_SENSORS_MAX6875 is not set - # CONFIG_SENSORS_TSL2550 is not set - # CONFIG_I2C_DEBUG_CORE is not set -@@ -672,12 +734,12 @@ CONFIG_SPI_MASTER=y - # SPI Master Controller Drivers - # - # CONFIG_SPI_BITBANG is not set -+# CONFIG_SPI_GPIO is not set - CONFIG_SPI_OMAP24XX=y - - # - # SPI Protocol Masters - # --# CONFIG_EEPROM_AT25 is not set - # CONFIG_SPI_SPIDEV is not set - # CONFIG_SPI_TLE62X0 is not set - CONFIG_ARCH_REQUIRE_GPIOLIB=y -@@ -686,11 +748,16 @@ CONFIG_GPIOLIB=y - # CONFIG_GPIO_SYSFS is not set - - # -+# Memory mapped GPIO expanders: -+# -+ -+# - # I2C GPIO expanders: - # - # CONFIG_GPIO_MAX732X is not set - # CONFIG_GPIO_PCA953X is not set - # CONFIG_GPIO_PCF857X is not set -+CONFIG_GPIO_TWL4030=y - - # - # PCI GPIO expanders: -@@ -702,26 +769,34 @@ CONFIG_GPIOLIB=y - # CONFIG_GPIO_MAX7301 is not set - # CONFIG_GPIO_MCP23S08 is not set - CONFIG_W1=y -+CONFIG_W1_CON=y - - # - # 1-wire Bus Masters - # -+# CONFIG_W1_MASTER_DS2490 is not set - # CONFIG_W1_MASTER_DS2482 is not set - # CONFIG_W1_MASTER_DS1WM is not set - # CONFIG_W1_MASTER_GPIO is not set -+# CONFIG_HDQ_MASTER_OMAP is not set - - # - # 1-wire Slaves - # - # CONFIG_W1_SLAVE_THERM is not set - # CONFIG_W1_SLAVE_SMEM is not set -+# CONFIG_W1_SLAVE_DS2431 is not set - # CONFIG_W1_SLAVE_DS2433 is not set - # CONFIG_W1_SLAVE_DS2760 is not set -+# CONFIG_W1_SLAVE_BQ27000 is not set - CONFIG_POWER_SUPPLY=y - # CONFIG_POWER_SUPPLY_DEBUG is not set - # CONFIG_PDA_POWER is not set - # CONFIG_BATTERY_DS2760 is not set -+# CONFIG_BATTERY_BQ27x00 is not set - # CONFIG_HWMON is not set -+# CONFIG_THERMAL is not set -+# CONFIG_THERMAL_HWMON is not set - CONFIG_WATCHDOG=y - CONFIG_WATCHDOG_NOWAYOUT=y - -@@ -729,11 +804,17 @@ CONFIG_WATCHDOG_NOWAYOUT=y - # Watchdog Device Drivers - # - # CONFIG_SOFT_WATCHDOG is not set -+# CONFIG_OMAP_WATCHDOG is not set - - # --# Sonics Silicon Backplane -+# USB-based Watchdog Cards - # -+# CONFIG_USBPCWATCHDOG is not set - CONFIG_SSB_POSSIBLE=y -+ -+# -+# Sonics Silicon Backplane -+# - # CONFIG_SSB is not set - - # -@@ -741,12 +822,19 @@ CONFIG_SSB_POSSIBLE=y - # - # CONFIG_MFD_CORE is not set - # CONFIG_MFD_SM501 is not set -+# CONFIG_MFD_ASIC3 is not set - # CONFIG_HTC_EGPIO is not set - # CONFIG_HTC_PASIC3 is not set -+# CONFIG_TPS65010 is not set -+CONFIG_TWL4030_CORE=y - # CONFIG_MFD_TMIO is not set - # CONFIG_MFD_T7L66XB is not set - # CONFIG_MFD_TC6387XB is not set - # CONFIG_MFD_TC6393XB is not set -+# CONFIG_PMIC_DA903X is not set -+# CONFIG_MFD_WM8400 is not set -+# CONFIG_MFD_WM8350_I2C is not set -+# CONFIG_MFD_PCF50633 is not set - - # - # Multimedia devices -@@ -756,12 +844,14 @@ CONFIG_SSB_POSSIBLE=y - # Multimedia core support - # - # CONFIG_VIDEO_DEV is not set -+# CONFIG_DVB_CORE is not set - # CONFIG_VIDEO_MEDIA is not set - - # - # Multimedia drivers - # - CONFIG_DAB=y -+# CONFIG_USB_DABUSB is not set - - # - # Graphics support -@@ -782,10 +872,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m - # CONFIG_VGA_CONSOLE is not set - CONFIG_DUMMY_CONSOLE=y - CONFIG_SOUND=y -+# CONFIG_SOUND_OSS_CORE is not set - CONFIG_SND=y - # CONFIG_SND_SEQUENCER is not set - # CONFIG_SND_MIXER_OSS is not set - # CONFIG_SND_PCM_OSS is not set -+# CONFIG_SND_HRTIMER is not set - # CONFIG_SND_DYNAMIC_MINORS is not set - CONFIG_SND_SUPPORT_OLD_API=y - CONFIG_SND_VERBOSE_PROCFS=y -@@ -798,19 +890,197 @@ CONFIG_SND_DRIVERS=y - # CONFIG_SND_MPU401 is not set - CONFIG_SND_ARM=y - CONFIG_SND_SPI=y -+CONFIG_SND_USB=y -+# CONFIG_SND_USB_AUDIO is not set -+# CONFIG_SND_USB_CAIAQ is not set - # CONFIG_SND_SOC is not set - # CONFIG_SOUND_PRIME is not set - CONFIG_HID_SUPPORT=y - CONFIG_HID=y - # CONFIG_HID_DEBUG is not set - # CONFIG_HIDRAW is not set --# CONFIG_USB_SUPPORT is not set -+ -+# -+# USB Input Devices -+# -+CONFIG_USB_HID=y -+# CONFIG_HID_PID is not set -+# CONFIG_USB_HIDDEV is not set -+ -+# -+# Special HID drivers -+# -+# CONFIG_HID_A4TECH is not set -+# CONFIG_HID_APPLE is not set -+# CONFIG_HID_BELKIN is not set -+# CONFIG_HID_CHERRY is not set -+# CONFIG_HID_CHICONY is not set -+# CONFIG_HID_CYPRESS is not set -+# CONFIG_DRAGONRISE_FF is not set -+# CONFIG_HID_EZKEY is not set -+# CONFIG_HID_KYE is not set -+# CONFIG_HID_GYRATION is not set -+# CONFIG_HID_KENSINGTON is not set -+# CONFIG_HID_LOGITECH is not set -+# CONFIG_HID_MICROSOFT is not set -+# CONFIG_HID_MONTEREY is not set -+# CONFIG_HID_NTRIG is not set -+# CONFIG_HID_PANTHERLORD is not set -+# CONFIG_HID_PETALYNX is not set -+# CONFIG_HID_SAMSUNG is not set -+# CONFIG_HID_SONY is not set -+# CONFIG_HID_SUNPLUS is not set -+# CONFIG_GREENASIA_FF is not set -+# CONFIG_HID_TOPSEED is not set -+# CONFIG_THRUSTMASTER_FF is not set -+# CONFIG_ZEROPLUS_FF is not set -+CONFIG_USB_SUPPORT=y -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+CONFIG_USB_ARCH_HAS_EHCI=y -+CONFIG_USB=y -+CONFIG_USB_DEBUG=y -+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -+ -+# -+# Miscellaneous USB options -+# -+# CONFIG_USB_DEVICEFS is not set -+CONFIG_USB_DEVICE_CLASS=y -+# CONFIG_USB_DYNAMIC_MINORS is not set -+CONFIG_USB_SUSPEND=y -+CONFIG_USB_OTG=y -+# CONFIG_USB_OTG_WHITELIST is not set -+# CONFIG_USB_OTG_BLACKLIST_HUB is not set -+CONFIG_USB_MON=y -+# CONFIG_USB_WUSB is not set -+# CONFIG_USB_WUSB_CBAF is not set -+ -+# -+# USB Host Controller Drivers -+# -+# CONFIG_USB_C67X00_HCD is not set -+# CONFIG_USB_EHCI_HCD is not set -+# CONFIG_USB_OXU210HP_HCD is not set -+# CONFIG_USB_ISP116X_HCD is not set -+# CONFIG_USB_ISP1760_HCD is not set -+# CONFIG_USB_OHCI_HCD is not set -+# CONFIG_USB_SL811_HCD is not set -+# CONFIG_USB_R8A66597_HCD is not set -+# CONFIG_USB_HWA_HCD is not set -+CONFIG_USB_MUSB_HDRC=y -+CONFIG_USB_MUSB_SOC=y -+ -+# -+# OMAP 343x high speed USB support -+# -+# CONFIG_USB_MUSB_HOST is not set -+# CONFIG_USB_MUSB_PERIPHERAL is not set -+CONFIG_USB_MUSB_OTG=y -+CONFIG_USB_GADGET_MUSB_HDRC=y -+CONFIG_USB_MUSB_HDRC_HCD=y -+# CONFIG_MUSB_PIO_ONLY is not set -+CONFIG_USB_INVENTRA_DMA=y -+# CONFIG_USB_TI_CPPI_DMA is not set -+CONFIG_USB_MUSB_DEBUG=y -+ -+# -+# USB Device Class drivers -+# -+# CONFIG_USB_ACM is not set -+# CONFIG_USB_PRINTER is not set -+# CONFIG_USB_WDM is not set -+# CONFIG_USB_TMC is not set -+ -+# -+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -+# -+ -+# -+# also be needed; see USB_STORAGE Help for more info -+# -+# CONFIG_USB_STORAGE is not set -+# CONFIG_USB_LIBUSUAL is not set -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+ -+# -+# USB port drivers -+# -+# CONFIG_USB_SERIAL is not set -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_ADUTUX is not set -+# CONFIG_USB_SEVSEG is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+# CONFIG_USB_BERRY_CHARGE is not set -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYPRESS_CY7C63 is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_FTDI_ELAN is not set -+# CONFIG_USB_APPLEDISPLAY is not set -+# CONFIG_USB_LD is not set -+# CONFIG_USB_TRANCEVIBRATOR is not set -+# CONFIG_USB_IOWARRIOR is not set -+# CONFIG_USB_ISIGHTFW is not set -+# CONFIG_USB_VST is not set -+CONFIG_USB_GADGET=y -+CONFIG_USB_GADGET_DEBUG=y -+CONFIG_USB_GADGET_DEBUG_FILES=y -+CONFIG_USB_GADGET_VBUS_DRAW=2 -+CONFIG_USB_GADGET_SELECTED=y -+# CONFIG_USB_GADGET_AT91 is not set -+# CONFIG_USB_GADGET_ATMEL_USBA is not set -+# CONFIG_USB_GADGET_FSL_USB2 is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_PXA25X is not set -+# CONFIG_USB_GADGET_PXA27X is not set -+# CONFIG_USB_GADGET_S3C2410 is not set -+# CONFIG_USB_GADGET_IMX is not set -+# CONFIG_USB_GADGET_M66592 is not set -+# CONFIG_USB_GADGET_AMD5536UDC is not set -+# CONFIG_USB_GADGET_FSL_QE is not set -+# CONFIG_USB_GADGET_CI13XXX is not set -+# CONFIG_USB_GADGET_NET2280 is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+CONFIG_USB_GADGET_DUALSPEED=y -+CONFIG_USB_ZERO=y -+# CONFIG_USB_ZERO_HNPTEST is not set -+# CONFIG_USB_ETH is not set -+# CONFIG_USB_GADGETFS is not set -+# CONFIG_USB_FILE_STORAGE is not set -+# CONFIG_USB_G_SERIAL is not set -+# CONFIG_USB_MIDI_GADGET is not set -+# CONFIG_USB_G_PRINTER is not set -+# CONFIG_USB_CDC_COMPOSITE is not set -+ -+# -+# OTG and related infrastructure -+# -+CONFIG_USB_OTG_UTILS=y -+# CONFIG_USB_GPIO_VBUS is not set -+# CONFIG_ISP1301_OMAP is not set -+CONFIG_TWL4030_USB=y -+# CONFIG_NOP_USB_XCEIV is not set - CONFIG_MMC=y - # CONFIG_MMC_DEBUG is not set - # CONFIG_MMC_UNSAFE_RESUME is not set - - # --# MMC/SD Card Drivers -+# MMC/SD/SDIO Card Drivers - # - CONFIG_MMC_BLOCK=y - CONFIG_MMC_BLOCK_BOUNCE=y -@@ -818,11 +1088,13 @@ CONFIG_MMC_BLOCK_BOUNCE=y - # CONFIG_MMC_TEST is not set - - # --# MMC/SD Host Controller Drivers -+# MMC/SD/SDIO Host Controller Drivers - # - # CONFIG_MMC_SDHCI is not set --# CONFIG_MMC_OMAP is not set -+CONFIG_MMC_OMAP_HS=y - # CONFIG_MMC_SPI is not set -+# CONFIG_MEMSTICK is not set -+# CONFIG_ACCESSIBILITY is not set - # CONFIG_NEW_LEDS is not set - CONFIG_RTC_LIB=y - CONFIG_RTC_CLASS=y -@@ -852,43 +1124,55 @@ CONFIG_RTC_INTF_DEV=y - # CONFIG_RTC_DRV_PCF8563 is not set - # CONFIG_RTC_DRV_PCF8583 is not set - # CONFIG_RTC_DRV_M41T80 is not set -+# CONFIG_RTC_DRV_TWL4030 is not set - # CONFIG_RTC_DRV_S35390A is not set - # CONFIG_RTC_DRV_FM3130 is not set -+# CONFIG_RTC_DRV_RX8581 is not set - - # - # SPI RTC drivers - # - # CONFIG_RTC_DRV_M41T94 is not set - # CONFIG_RTC_DRV_DS1305 is not set -+# CONFIG_RTC_DRV_DS1390 is not set - # CONFIG_RTC_DRV_MAX6902 is not set - # CONFIG_RTC_DRV_R9701 is not set - # CONFIG_RTC_DRV_RS5C348 is not set -+# CONFIG_RTC_DRV_DS3234 is not set - - # - # Platform RTC drivers - # - # CONFIG_RTC_DRV_CMOS is not set -+# CONFIG_RTC_DRV_DS1286 is not set - # CONFIG_RTC_DRV_DS1511 is not set - # CONFIG_RTC_DRV_DS1553 is not set - # CONFIG_RTC_DRV_DS1742 is not set - # CONFIG_RTC_DRV_STK17TA8 is not set - # CONFIG_RTC_DRV_M48T86 is not set -+# CONFIG_RTC_DRV_M48T35 is not set - # CONFIG_RTC_DRV_M48T59 is not set -+# CONFIG_RTC_DRV_BQ4802 is not set - # CONFIG_RTC_DRV_V3020 is not set - - # - # on-CPU RTC drivers - # - # CONFIG_DMADEVICES is not set -- --# --# Voltage and Current regulators --# --# CONFIG_REGULATOR is not set -+# CONFIG_AUXDISPLAY is not set -+CONFIG_REGULATOR=y -+# CONFIG_REGULATOR_DEBUG is not set - # CONFIG_REGULATOR_FIXED_VOLTAGE is not set - # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set - # CONFIG_REGULATOR_BQ24022 is not set -+CONFIG_REGULATOR_TWL4030=y - # CONFIG_UIO is not set -+# CONFIG_STAGING is not set -+ -+# -+# CBUS support -+# -+# CONFIG_CBUS is not set - - # - # File systems -@@ -897,18 +1181,24 @@ CONFIG_EXT2_FS=y - # CONFIG_EXT2_FS_XATTR is not set - # CONFIG_EXT2_FS_XIP is not set - CONFIG_EXT3_FS=y -+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set - # CONFIG_EXT3_FS_XATTR is not set --# CONFIG_EXT4DEV_FS is not set -+# CONFIG_EXT4_FS is not set - CONFIG_JBD=y - # CONFIG_REISERFS_FS is not set - # CONFIG_JFS_FS is not set --# CONFIG_FS_POSIX_ACL is not set -+CONFIG_FS_POSIX_ACL=y -+CONFIG_FILE_LOCKING=y - # CONFIG_XFS_FS is not set -+# CONFIG_OCFS2_FS is not set -+# CONFIG_BTRFS_FS is not set - CONFIG_DNOTIFY=y - CONFIG_INOTIFY=y - CONFIG_INOTIFY_USER=y - CONFIG_QUOTA=y -+# CONFIG_QUOTA_NETLINK_INTERFACE is not set - CONFIG_PRINT_QUOTA_WARNING=y -+CONFIG_QUOTA_TREE=y - # CONFIG_QFMT_V1 is not set - CONFIG_QFMT_V2=y - CONFIG_QUOTACTL=y -@@ -917,6 +1207,11 @@ CONFIG_QUOTACTL=y - # CONFIG_FUSE_FS is not set - - # -+# Caches -+# -+# CONFIG_FSCACHE is not set -+ -+# - # CD-ROM/DVD Filesystems - # - # CONFIG_ISO9660_FS is not set -@@ -937,15 +1232,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" - # - CONFIG_PROC_FS=y - CONFIG_PROC_SYSCTL=y -+CONFIG_PROC_PAGE_MONITOR=y - CONFIG_SYSFS=y - CONFIG_TMPFS=y - # CONFIG_TMPFS_POSIX_ACL is not set - # CONFIG_HUGETLB_PAGE is not set - # CONFIG_CONFIGFS_FS is not set -- --# --# Miscellaneous filesystems --# -+CONFIG_MISC_FILESYSTEMS=y - # CONFIG_ADFS_FS is not set - # CONFIG_AFFS_FS is not set - # CONFIG_HFS_FS is not set -@@ -954,6 +1247,7 @@ CONFIG_TMPFS=y - # CONFIG_BFS_FS is not set - # CONFIG_EFS_FS is not set - # CONFIG_CRAMFS is not set -+# CONFIG_SQUASHFS is not set - # CONFIG_VXFS_FS is not set - # CONFIG_MINIX_FS is not set - # CONFIG_OMFS_FS is not set -@@ -962,6 +1256,7 @@ CONFIG_TMPFS=y - # CONFIG_ROMFS_FS is not set - # CONFIG_SYSV_FS is not set - # CONFIG_UFS_FS is not set -+# CONFIG_NILFS2_FS is not set - CONFIG_NETWORK_FILESYSTEMS=y - CONFIG_NFS_FS=y - CONFIG_NFS_V3=y -@@ -975,7 +1270,6 @@ CONFIG_NFS_ACL_SUPPORT=y - CONFIG_NFS_COMMON=y - CONFIG_SUNRPC=y - CONFIG_SUNRPC_GSS=y --# CONFIG_SUNRPC_REGISTER_V4 is not set - CONFIG_RPCSEC_GSS_KRB5=y - # CONFIG_RPCSEC_GSS_SPKM3 is not set - # CONFIG_SMB_FS is not set -@@ -1045,6 +1339,7 @@ CONFIG_NLS_ISO8859_1=y - # CONFIG_NLS_KOI8_R is not set - # CONFIG_NLS_KOI8_U is not set - # CONFIG_NLS_UTF8 is not set -+# CONFIG_DLM is not set - - # - # Kernel hacking -@@ -1062,6 +1357,9 @@ CONFIG_DEBUG_KERNEL=y - CONFIG_DETECT_SOFTLOCKUP=y - # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set - CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -+CONFIG_DETECT_HUNG_TASK=y -+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set -+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 - CONFIG_SCHED_DEBUG=y - # CONFIG_SCHEDSTATS is not set - # CONFIG_TIMER_STATS is not set -@@ -1084,21 +1382,36 @@ CONFIG_DEBUG_INFO=y - # CONFIG_DEBUG_MEMORY_INIT is not set - # CONFIG_DEBUG_LIST is not set - # CONFIG_DEBUG_SG is not set --CONFIG_FRAME_POINTER=y -+# CONFIG_DEBUG_NOTIFIERS is not set - # CONFIG_BOOT_PRINTK_DELAY is not set - # CONFIG_RCU_TORTURE_TEST is not set -+# CONFIG_RCU_CPU_STALL_DETECTOR is not set - # CONFIG_BACKTRACE_SELF_TEST is not set -+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set - # CONFIG_FAULT_INJECTION is not set - # CONFIG_LATENCYTOP is not set --CONFIG_HAVE_FTRACE=y --CONFIG_HAVE_DYNAMIC_FTRACE=y --# CONFIG_FTRACE is not set -+# CONFIG_PAGE_POISONING is not set -+CONFIG_HAVE_FUNCTION_TRACER=y -+CONFIG_TRACING_SUPPORT=y -+ -+# -+# Tracers -+# -+# CONFIG_FUNCTION_TRACER is not set - # CONFIG_IRQSOFF_TRACER is not set - # CONFIG_SCHED_TRACER is not set - # CONFIG_CONTEXT_SWITCH_TRACER is not set -+# CONFIG_EVENT_TRACER is not set -+# CONFIG_BOOT_TRACER is not set -+# CONFIG_TRACE_BRANCH_PROFILING is not set -+# CONFIG_STACK_TRACER is not set -+# CONFIG_KMEMTRACE is not set -+# CONFIG_WORKQUEUE_TRACER is not set -+# CONFIG_BLK_DEV_IO_TRACE is not set - # CONFIG_SAMPLES is not set - CONFIG_HAVE_ARCH_KGDB=y - # CONFIG_KGDB is not set -+CONFIG_ARM_UNWIND=y - # CONFIG_DEBUG_USER is not set - # CONFIG_DEBUG_ERRORS is not set - # CONFIG_DEBUG_STACK_USAGE is not set -@@ -1110,17 +1423,28 @@ CONFIG_DEBUG_LL=y - # - # CONFIG_KEYS is not set - # CONFIG_SECURITY is not set -+# CONFIG_SECURITYFS is not set - # CONFIG_SECURITY_FILE_CAPABILITIES is not set - CONFIG_CRYPTO=y - - # - # Crypto core or helper - # -+# CONFIG_CRYPTO_FIPS is not set - CONFIG_CRYPTO_ALGAPI=y -+CONFIG_CRYPTO_ALGAPI2=y -+CONFIG_CRYPTO_AEAD2=y - CONFIG_CRYPTO_BLKCIPHER=y -+CONFIG_CRYPTO_BLKCIPHER2=y -+CONFIG_CRYPTO_HASH=y -+CONFIG_CRYPTO_HASH2=y -+CONFIG_CRYPTO_RNG2=y -+CONFIG_CRYPTO_PCOMP=y - CONFIG_CRYPTO_MANAGER=y -+CONFIG_CRYPTO_MANAGER2=y - # CONFIG_CRYPTO_GF128MUL is not set - # CONFIG_CRYPTO_NULL is not set -+CONFIG_CRYPTO_WORKQUEUE=y - # CONFIG_CRYPTO_CRYPTD is not set - # CONFIG_CRYPTO_AUTHENC is not set - # CONFIG_CRYPTO_TEST is not set -@@ -1152,7 +1476,7 @@ CONFIG_CRYPTO_PCBC=m - # - # Digest - # --# CONFIG_CRYPTO_CRC32C is not set -+CONFIG_CRYPTO_CRC32C=y - # CONFIG_CRYPTO_MD4 is not set - CONFIG_CRYPTO_MD5=y - # CONFIG_CRYPTO_MICHAEL_MIC is not set -@@ -1189,15 +1513,21 @@ CONFIG_CRYPTO_DES=y - # Compression - # - # CONFIG_CRYPTO_DEFLATE is not set -+# CONFIG_CRYPTO_ZLIB is not set - # CONFIG_CRYPTO_LZO is not set -+ -+# -+# Random Number Generation -+# -+# CONFIG_CRYPTO_ANSI_CPRNG is not set - CONFIG_CRYPTO_HW=y -+# CONFIG_BINARY_PRINTF is not set - - # - # Library routines - # - CONFIG_BITREVERSE=y --# CONFIG_GENERIC_FIND_FIRST_BIT is not set --# CONFIG_GENERIC_FIND_NEXT_BIT is not set -+CONFIG_GENERIC_FIND_LAST_BIT=y - CONFIG_CRC_CCITT=y - # CONFIG_CRC16 is not set - CONFIG_CRC_T10DIF=y -@@ -1205,7 +1535,9 @@ CONFIG_CRC_T10DIF=y - CONFIG_CRC32=y - # CONFIG_CRC7 is not set - CONFIG_LIBCRC32C=y --CONFIG_PLIST=y -+CONFIG_ZLIB_INFLATE=y -+CONFIG_DECOMPRESS_GZIP=y - CONFIG_HAS_IOMEM=y - CONFIG_HAS_IOPORT=y - CONFIG_HAS_DMA=y -+CONFIG_NLATTR=y --- -1.6.3.2 - diff --git a/meta/packages/linux/linux-omap3-pm-git/zoom2/0004-serial-8250-add-IRQ-trigger-support.patch b/meta/packages/linux/linux-omap3-pm-git/zoom2/0004-serial-8250-add-IRQ-trigger-support.patch deleted file mode 100644 index 05ca90512..000000000 --- a/meta/packages/linux/linux-omap3-pm-git/zoom2/0004-serial-8250-add-IRQ-trigger-support.patch +++ /dev/null @@ -1,143 +0,0 @@ -From 3f819713f3c7ccfd56146f4c007155bc47a170ac Mon Sep 17 00:00:00 2001 -From: Vikram Pandita -Date: Mon, 22 Jun 2009 17:58:47 -0500 -Subject: [PATCH 4/8] serial: 8250: add IRQ trigger support - -There is currently no provision for passing IRQ trigger flags for -serial IRQs with triggering requirements (such as GPIO IRQs) - -This patch adds irqflags to plat_serial8250_port that can be passed -from board file to reqest_irq() of 8250 driver - -Changes are backward compatible with boards passing UPF_SHARE_IRQ flag - -Tested on Zoom2 board that has IRQF_TRIGGER_RISING requirement for 8250 irq - -Signed-off-by: Vikram Pandita ---- - drivers/serial/8250.c | 14 +++++++++----- - drivers/serial/8250.h | 1 + - include/linux/serial_8250.h | 1 + - include/linux/serial_core.h | 1 + - 4 files changed, 12 insertions(+), 5 deletions(-) - -diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c -index 606fabb..6474fe4 100644 ---- a/drivers/serial/8250.c -+++ b/drivers/serial/8250.c -@@ -1681,7 +1681,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up) - INIT_LIST_HEAD(&up->list); - i->head = &up->list; - spin_unlock_irq(&i->lock); -- -+ irq_flags |= up->port.irqflags; - ret = request_irq(up->port.irq, serial8250_interrupt, - irq_flags, "serial", i); - if (ret < 0) -@@ -2030,7 +2030,7 @@ static int serial8250_startup(struct uart_port *port) - * allow register changes to become visible. - */ - spin_lock_irqsave(&up->port.lock, flags); -- if (up->port.flags & UPF_SHARE_IRQ) -+ if (up->port.irqflags & IRQF_SHARED) - disable_irq_nosync(up->port.irq); - - wait_for_xmitr(up, UART_LSR_THRE); -@@ -2043,7 +2043,7 @@ static int serial8250_startup(struct uart_port *port) - iir = serial_in(up, UART_IIR); - serial_out(up, UART_IER, 0); - -- if (up->port.flags & UPF_SHARE_IRQ) -+ if (up->port.irqflags & IRQF_SHARED) - enable_irq(up->port.irq); - spin_unlock_irqrestore(&up->port.lock, flags); - -@@ -2688,6 +2688,7 @@ static void __init serial8250_isa_init_ports(void) - i++, up++) { - up->port.iobase = old_serial_port[i].port; - up->port.irq = irq_canonicalize(old_serial_port[i].irq); -+ up->port.irqflags = old_serial_port[i].irqflags; - up->port.uartclk = old_serial_port[i].baud_base * 16; - up->port.flags = old_serial_port[i].flags; - up->port.hub6 = old_serial_port[i].hub6; -@@ -2696,7 +2697,7 @@ static void __init serial8250_isa_init_ports(void) - up->port.regshift = old_serial_port[i].iomem_reg_shift; - set_io_from_upio(&up->port); - if (share_irqs) -- up->port.flags |= UPF_SHARE_IRQ; -+ up->port.irqflags |= IRQF_SHARED; - } - } - -@@ -2886,6 +2887,7 @@ int __init early_serial_setup(struct uart_port *port) - p->iobase = port->iobase; - p->membase = port->membase; - p->irq = port->irq; -+ p->irqflags = port->irqflags; - p->uartclk = port->uartclk; - p->fifosize = port->fifosize; - p->regshift = port->regshift; -@@ -2959,6 +2961,7 @@ static int __devinit serial8250_probe(struct platform_device *dev) - port.iobase = p->iobase; - port.membase = p->membase; - port.irq = p->irq; -+ port.irqflags = p->irqflags; - port.uartclk = p->uartclk; - port.regshift = p->regshift; - port.iotype = p->iotype; -@@ -2971,7 +2974,7 @@ static int __devinit serial8250_probe(struct platform_device *dev) - port.serial_out = p->serial_out; - port.dev = &dev->dev; - if (share_irqs) -- port.flags |= UPF_SHARE_IRQ; -+ port.irqflags |= IRQF_SHARED; - ret = serial8250_register_port(&port); - if (ret < 0) { - dev_err(&dev->dev, "unable to register port at index %d " -@@ -3113,6 +3116,7 @@ int serial8250_register_port(struct uart_port *port) - uart->port.iobase = port->iobase; - uart->port.membase = port->membase; - uart->port.irq = port->irq; -+ uart->port.irqflags = port->irqflags; - uart->port.uartclk = port->uartclk; - uart->port.fifosize = port->fifosize; - uart->port.regshift = port->regshift; -diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h -index 5202603..9b34b04 100644 ---- a/drivers/serial/8250.h -+++ b/drivers/serial/8250.h -@@ -20,6 +20,7 @@ struct old_serial_port { - unsigned int baud_base; - unsigned int port; - unsigned int irq; -+ unsigned long irqflags; - unsigned int flags; - unsigned char hub6; - unsigned char io_type; -diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h -index d4d2a78..fb46aba 100644 ---- a/include/linux/serial_8250.h -+++ b/include/linux/serial_8250.h -@@ -22,6 +22,7 @@ struct plat_serial8250_port { - void __iomem *membase; /* ioremap cookie or NULL */ - resource_size_t mapbase; /* resource base */ - unsigned int irq; /* interrupt number */ -+ unsigned long irqflags; /* request_irq flags */ - unsigned int uartclk; /* UART clock rate */ - void *private_data; - unsigned char regshift; /* register shift */ -diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h -index 23d2fb0..3cd255f 100644 ---- a/include/linux/serial_core.h -+++ b/include/linux/serial_core.h -@@ -265,6 +265,7 @@ struct uart_port { - unsigned int (*serial_in)(struct uart_port *, int); - void (*serial_out)(struct uart_port *, int, int); - unsigned int irq; /* irq number */ -+ unsigned long irqflags; /* irq flags */ - unsigned int uartclk; /* base uart clock */ - unsigned int fifosize; /* tx fifo size */ - unsigned char x_char; /* xon/xoff char */ --- -1.6.3.2 - diff --git a/meta/packages/linux/linux-omap3-pm-git/zoom2/0005-OMAP-Zoom2-Release-Dbg-board-detect-gpio.patch b/meta/packages/linux/linux-omap3-pm-git/zoom2/0005-OMAP-Zoom2-Release-Dbg-board-detect-gpio.patch new file mode 100644 index 000000000..a01f65f89 --- /dev/null +++ b/meta/packages/linux/linux-omap3-pm-git/zoom2/0005-OMAP-Zoom2-Release-Dbg-board-detect-gpio.patch @@ -0,0 +1,41 @@ +From 04c8398ae7dfdbe0d9aaf27fdda35f6ab91e8b85 Mon Sep 17 00:00:00 2001 +From: Vikram Pandita +Date: Thu, 20 Aug 2009 17:31:58 -0500 +Subject: [PATCH 5/5] OMAP: Zoom2: Release Dbg board detect gpio + +Release the Dbg board detection gpio once its purpose is served + +Signed-off-by: Vikram Pandita +--- + arch/arm/mach-omap2/board-zoom-debugboard.c | 7 ++++--- + 1 files changed, 4 insertions(+), 3 deletions(-) + +diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c +index 4dd714d..d80e448 100644 +--- a/arch/arm/mach-omap2/board-zoom-debugboard.c ++++ b/arch/arm/mach-omap2/board-zoom-debugboard.c +@@ -130,6 +130,7 @@ static inline void __init zoom2_init_quaduart(void) + static inline int omap_zoom2_debugboard_detect(void) + { + int debug_board_detect = 0; ++ int ret = 1; + + debug_board_detect = ZOOM2_SMSC911X_GPIO; + +@@ -141,10 +142,10 @@ static inline int omap_zoom2_debugboard_detect(void) + gpio_direction_input(debug_board_detect); + + if (!gpio_get_value(debug_board_detect)) { +- gpio_free(debug_board_detect); +- return 0; ++ ret = 0; + } +- return 1; ++ gpio_free(debug_board_detect); ++ return ret; + } + + static struct platform_device *zoom2_devices[] __initdata = { +-- +1.6.3.2 + diff --git a/meta/packages/linux/linux-omap3-pm-git/zoom2/0005-OMAP2-Zoom2-Pass-irqflags-to-8250-driver.patch b/meta/packages/linux/linux-omap3-pm-git/zoom2/0005-OMAP2-Zoom2-Pass-irqflags-to-8250-driver.patch deleted file mode 100644 index a86622bf1..000000000 --- a/meta/packages/linux/linux-omap3-pm-git/zoom2/0005-OMAP2-Zoom2-Pass-irqflags-to-8250-driver.patch +++ /dev/null @@ -1,41 +0,0 @@ -From a9551305279caac19d9f7ee121633fd18baa2fab Mon Sep 17 00:00:00 2001 -From: Vikram Pandita -Date: Mon, 22 Jun 2009 18:20:04 -0500 -Subject: [PATCH 5/8] OMAP2: Zoom2: Pass irqflags to 8250 driver - -Pass irqflags to 8250 driver from zoom2 board file -Zoom2 has IRQF_TRIGGER_RISING requirement for the 8250 GPIO irq - -This patch is dependent on 8250 driver changes getting accepted upstream: -http://patchwork.kernel.org/patch/31884/ - -Warn: could cause compilation break if above patch is not integrated first - -Signed-off-by: Vikram Pandita ---- - arch/arm/mach-omap2/board-zoom-debugboard.c | 2 ++ - 1 files changed, 2 insertions(+), 0 deletions(-) - -diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c -index bac5c43..f546063 100644 ---- a/arch/arm/mach-omap2/board-zoom-debugboard.c -+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c -@@ -12,6 +12,7 @@ - #include - #include - #include -+#include - - #include - -@@ -84,6 +85,7 @@ static struct plat_serial8250_port serial_platform_data[] = { - .mapbase = 0x10000000, - .irq = OMAP_GPIO_IRQ(102), - .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ, -+ .irqflags = IRQF_SHARED | IRQF_TRIGGER_RISING, - .iotype = UPIO_MEM, - .regshift = 1, - .uartclk = QUART_CLK, --- -1.6.3.2 - diff --git a/meta/packages/linux/linux-omap3-pm-git/zoom2/0006-OMAP3-Zoom2-ext-UART-needs-plaform_device.id-3.patch b/meta/packages/linux/linux-omap3-pm-git/zoom2/0006-OMAP3-Zoom2-ext-UART-needs-plaform_device.id-3.patch deleted file mode 100644 index 2e1e87151..000000000 --- a/meta/packages/linux/linux-omap3-pm-git/zoom2/0006-OMAP3-Zoom2-ext-UART-needs-plaform_device.id-3.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 14b507c8e7fc09e91297a82819296533ab35d8ae Mon Sep 17 00:00:00 2001 -From: Kevin Hilman -Date: Mon, 20 Jul 2009 16:12:32 -0700 -Subject: [PATCH 6/8] OMAP3: Zoom2: ext UART needs plaform_device.id >= 3 - -The on-chip UARTs now have individual platform_device.id numbers, -so for the external UART to register properly, it needs an id >= 3. - -Signed-off-by: Kevin Hilman ---- - arch/arm/mach-omap2/board-zoom-debugboard.c | 2 +- - 1 files changed, 1 insertions(+), 1 deletions(-) - -diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c -index f546063..e0948c9 100644 ---- a/arch/arm/mach-omap2/board-zoom-debugboard.c -+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c -@@ -96,7 +96,7 @@ static struct plat_serial8250_port serial_platform_data[] = { - - static struct platform_device zoom2_debugboard_serial_device = { - .name = "serial8250", -- .id = PLAT8250_DEV_PLATFORM1, -+ .id = 3, - .dev = { - .platform_data = serial_platform_data, - }, --- -1.6.3.2 - diff --git a/meta/packages/linux/linux-omap3-pm-git/zoom2/0007-omap-zoom2-add-external-uart-DEBUG_LL-support-to-zoo.patch b/meta/packages/linux/linux-omap3-pm-git/zoom2/0007-omap-zoom2-add-external-uart-DEBUG_LL-support-to-zoo.patch deleted file mode 100644 index d2f98c5b5..000000000 --- a/meta/packages/linux/linux-omap3-pm-git/zoom2/0007-omap-zoom2-add-external-uart-DEBUG_LL-support-to-zoo.patch +++ /dev/null @@ -1,71 +0,0 @@ -From e2d19993731b3b4b083329f3acb4538e9d94fc36 Mon Sep 17 00:00:00 2001 -From: Erik Gilling -Date: Tue, 21 Apr 2009 13:38:12 -0700 -Subject: [PATCH 7/8] omap: zoom2: add external uart DEBUG_LL support to zoom2 board file - -Signed-off-by: Erik Gilling ---- - arch/arm/mach-omap2/board-zoom2.c | 23 +++++++++++++++++++++-- - 1 files changed, 21 insertions(+), 2 deletions(-) - -diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c -index e4bf50a..5742b55 100644 ---- a/arch/arm/mach-omap2/board-zoom2.c -+++ b/arch/arm/mach-omap2/board-zoom2.c -@@ -16,9 +16,11 @@ - #include - #include - #include -+#include - - #include - #include -+#include - - #include - #include -@@ -27,6 +29,10 @@ - #include "mmc-twl4030.h" - #include "omap3-opp.h" - -+#define ZOOM2_QUART_PHYS 0x10000000 -+#define ZOOM2_QUART_VIRT 0xFB000000 -+#define ZOOM2_QUART_SIZE SZ_1M -+ - /* Zoom2 has Qwerty keyboard*/ - static int zoom2_twl4030_keymap[] = { - KEY(0, 0, KEY_E), -@@ -277,15 +283,28 @@ static void __init omap_zoom2_init(void) - usb_musb_init(); - } - -+static struct map_desc zoom2_io_desc[] __initdata = { -+ { -+ .virtual = ZOOM2_QUART_VIRT, -+ .pfn = __phys_to_pfn(ZOOM2_QUART_PHYS), -+ .length = ZOOM2_QUART_SIZE, -+ .type = MT_DEVICE -+ }, -+}; -+ - static void __init omap_zoom2_map_io(void) - { - omap2_set_globals_343x(); -+ iotable_init(zoom2_io_desc, ARRAY_SIZE(zoom2_io_desc)); - omap2_map_common_io(); - } - - MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") -- .phys_io = 0x48000000, -- .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, -+ /* phys_io is only used for DEBUG_LL early printing. The Zoom2's -+ * console is on an external quad UART sitting at address 0x10000000 -+ */ -+ .phys_io = 0x10000000, -+ .io_pg_offst = ((0xfb000000) >> 18) & 0xfffc, - .boot_params = 0x80000100, - .map_io = omap_zoom2_map_io, - .init_irq = omap_zoom2_init_irq, --- -1.6.3.2 - diff --git a/meta/packages/linux/linux-omap3-pm-git/zoom2/0008-omap2-add-support-for-DEBUG_LL-on-external-UART.patch b/meta/packages/linux/linux-omap3-pm-git/zoom2/0008-omap2-add-support-for-DEBUG_LL-on-external-UART.patch deleted file mode 100644 index 7ca2dcb9f..000000000 --- a/meta/packages/linux/linux-omap3-pm-git/zoom2/0008-omap2-add-support-for-DEBUG_LL-on-external-UART.patch +++ /dev/null @@ -1,103 +0,0 @@ -From bef0894d8a200e43593117a3832cab825ea8aa8c Mon Sep 17 00:00:00 2001 -From: Erik Gilling -Date: Tue, 21 Apr 2009 13:37:25 -0700 -Subject: [PATCH 8/8] omap2: add support for DEBUG_LL on external UART - -Signed-off-by: Erik Gilling ---- - arch/arm/plat-omap/Kconfig | 3 +++ - arch/arm/plat-omap/include/mach/debug-macro.S | 14 +++++++++++++- - arch/arm/plat-omap/include/mach/serial.h | 1 + - arch/arm/plat-omap/include/mach/uncompress.h | 5 ++++- - 4 files changed, 21 insertions(+), 2 deletions(-) - -diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig -index c782418..e891f07 100644 ---- a/arch/arm/plat-omap/Kconfig -+++ b/arch/arm/plat-omap/Kconfig -@@ -210,6 +210,9 @@ config OMAP_LL_DEBUG_UART2 - config OMAP_LL_DEBUG_UART3 - bool "UART3" - -+config OMAP_LL_DEBUG_UART_EXT -+ bool "UART_EXT" -+ - endchoice - - config OMAP_SERIAL_WAKE -diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S -index ac24050..5864019 100644 ---- a/arch/arm/plat-omap/include/mach/debug-macro.S -+++ b/arch/arm/plat-omap/include/mach/debug-macro.S -@@ -37,6 +37,10 @@ - #endif - - #elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) -+#ifdef CONFIG_OMAP_LL_DEBUG_UART_EXT -+ moveq \rx, #0x10000000 @ physical base address -+ movne \rx, #0xfb000000 @ virtual base address -+#else - moveq \rx, #0x48000000 @ physical base address - movne \rx, #0xd8000000 @ virtual base - orr \rx, \rx, #0x0006a000 -@@ -48,20 +52,28 @@ - add \rx, \rx, #0x00006000 - #endif - #endif -+#endif - .endm - - .macro senduart,rd,rx - strb \rd, [\rx] - .endm - -+#ifdef CONFIG_OMAP_LL_DEBUG_UART_EXT -+#define REGSHIFT 1 -+#else -+#define REGSHIFT 2 -+#endif - .macro busyuart,rd,rx --1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends -+1001: ldrb \rd, [\rx, #(0x5 << REGSHIFT)] @ OMAP-1510 and friends - and \rd, \rd, #0x60 - teq \rd, #0x60 -+#ifndef CONFIG_OMAP_LL_DEBUG_UART_EXT - beq 1002f - ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only - and \rd, \rd, #0x60 - teq \rd, #0x60 -+#endif - bne 1001b - 1002: - .endm -diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h -index e249186..7ae4567 100644 ---- a/arch/arm/plat-omap/include/mach/serial.h -+++ b/arch/arm/plat-omap/include/mach/serial.h -@@ -32,6 +32,7 @@ - #define OMAP_UART1_BASE 0x4806a000 - #define OMAP_UART2_BASE 0x4806c000 - #define OMAP_UART3_BASE 0x49020000 -+#define OMAP_UART_EXT_BASE 0x10000000 - #define OMAP_MAX_NR_PORTS 3 - #elif defined(CONFIG_ARCH_OMAP4) - /* OMAP4 serial ports */ -diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h -index 0814c5f..082c0cd 100644 ---- a/arch/arm/plat-omap/include/mach/uncompress.h -+++ b/arch/arm/plat-omap/include/mach/uncompress.h -@@ -39,7 +39,10 @@ static void putc(int c) - #endif - - #ifdef CONFIG_ARCH_OMAP --#ifdef CONFIG_OMAP_LL_DEBUG_UART3 -+#ifdef CONFIG_OMAP_LL_DEBUG_UART_EXT -+ uart = (volatile u8 *)(OMAP_UART_EXT_BASE); -+ shift = 1; -+#elif defined(CONFIG_OMAP_LL_DEBUG_UART3) - uart = (volatile u8 *)(OMAP_UART3_BASE); - #elif defined(CONFIG_OMAP_LL_DEBUG_UART2) - uart = (volatile u8 *)(OMAP_UART2_BASE); --- -1.6.3.2 - diff --git a/meta/packages/linux/linux-omap3-pm_git.bb b/meta/packages/linux/linux-omap3-pm_git.bb index 6799eb1dd..6432d869a 100644 --- a/meta/packages/linux/linux-omap3-pm_git.bb +++ b/meta/packages/linux/linux-omap3-pm_git.bb @@ -8,20 +8,17 @@ FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/${PN}-git/${MACHINE} SRCREV = "${AUTOREV}" -PV = "2.6.31-rc1+${PR}+git${SRCREV}" -PR = "r1" +PV = "2.6.31-rc7+pm+${PR}+git${SRCREV}" +PR = "r3" SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git;branch=pm;protocol=git" SRC_URI_append_zoom2 = " \ - file://0002-OMAP3-Zoom2-Add-TWL4030-support.patch;patch=1 \ - file://0003-OMAP3-Zoom2-Update-board-defconfig.patch;patch=1 \ - file://0004-serial-8250-add-IRQ-trigger-support.patch;patch=1 \ - file://0005-OMAP2-Zoom2-Pass-irqflags-to-8250-driver.patch;patch=1 \ - file://0006-OMAP3-Zoom2-ext-UART-needs-plaform_device.id-3.patch;patch=1 \ - file://0007-omap-zoom2-add-external-uart-DEBUG_LL-support-to-zoo.patch;patch=1 \ - file://0008-omap2-add-support-for-DEBUG_LL-on-external-UART.patch;patch=1 \ - " + file://0001-OMAP1-2-3-4-DEBUG_LL-cleanup.patch;patch=1 \ + file://0002-OMAP1-2-3-4-Adapt-board-files-for-cleand-DEBUG_LL-in.patch;patch=1 \ + file://0003-OMAP-Zoom2-Add-DEBUG_LL-interface-using-external-Qua.patch;patch=1 \ + file://0005-OMAP-Zoom2-Release-Dbg-board-detect-gpio.patch;patch=1 \ + " COMPATIBLE_MACHINE = "beagleboard|omap-3430sdp|omap3evm|overo|rx51|zoom2" @@ -42,7 +39,7 @@ do_configure_prepend() { yes '' | oe_runmake ${MACHINE}_external_defconfig else case ${MACHINE} in - omap-3430sdp|omap3evm) + omap-3430sdp | omap3evm) # works out of the box yes '' | oe_runmake omap3_pm_defconfig ;; @@ -56,11 +53,9 @@ do_configure_prepend() { -i ${S}/.config ;; zoom2) - # adjust LL_DEBUG console for these boards + # adjust LL_DEBUG console for this board yes '' | oe_runmake omap3_pm_defconfig sed -e "s/CONFIG_OMAP_LL_DEBUG_UART1=y/# CONFIG_OMAP_LL_DEBUG_UART1 is not set/" \ - -e "s/CONFIG_MMC_BLOCK=m/CONFIG_MMC_BLOCK=y/" \ - -e "s/CONFIG_MMC_OMAP_HS=m/CONFIG_MMC_OMAP_HS=y/" \ -i ${S}/.config echo "CONFIG_OMAP_LL_DEBUG_UART_EXT=y" >> ${S}/.config ;; -- cgit v1.2.3