From b2f192faabe412adce79534e22efe9fb69ee40e2 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Fri, 21 Jul 2006 10:10:31 +0000 Subject: Rename /openembedded/ -> /meta/ git-svn-id: https://svn.o-hand.com/repos/poky/trunk@530 311d38ba-8fff-0310-9ca6-ca027cbcb966 --- openembedded/packages/irda-utils/files/init | 72 -------- .../packages/irda-utils/irda-utils/configure.patch | 25 --- .../packages/irda-utils/irda-utils/m4.patch | 204 --------------------- .../packages/irda-utils/irda-utils_0.9.16.bb | 32 ---- 4 files changed, 333 deletions(-) delete mode 100755 openembedded/packages/irda-utils/files/init delete mode 100644 openembedded/packages/irda-utils/irda-utils/configure.patch delete mode 100644 openembedded/packages/irda-utils/irda-utils/m4.patch delete mode 100644 openembedded/packages/irda-utils/irda-utils_0.9.16.bb (limited to 'openembedded/packages/irda-utils') diff --git a/openembedded/packages/irda-utils/files/init b/openembedded/packages/irda-utils/files/init deleted file mode 100755 index 9becfcc0e..000000000 --- a/openembedded/packages/irda-utils/files/init +++ /dev/null @@ -1,72 +0,0 @@ -#! /bin/sh - -module_id() { - awk 'BEGIN { FS=": " } /Hardware/ { print $2 } ' /etc/sysconfig/irda - if [ $IRDA = "yes" ]; then - echo "DEVICE=$DEVICE" >> /etc/sysconfig/irda - echo "DONGLE=$DONGLE" >> /etc/sysconfig/irda - echo "DISCOVERY=$DISCOVERY" >> /etc/sysconfig/irda - fi -fi - -. /etc/sysconfig/irda - -# Check that irda is up. -[ ${IRDA} = "no" ] && exit 0 - -[ -f /usr/sbin/irattach ] || exit 0 - -ARGS= -if [ $DONGLE ]; then - ARGS="$ARGS -d $DONGLE" -fi -if [ "$DISCOVERY" = "yes" ];then - ARGS="$ARGS -s" -fi - -case "$1" in - start) - echo -n "Starting IrDA: " - irattach ${DEVICE} ${ARGS} > /dev/null 2>&1 & - echo "$NAME." - ;; - stop) - echo -n "Stopping IrDA: " - killall irattach > /dev/null 2>&1 - echo "$NAME." - ;; - restart|force-reload) - echo -n "Restarting IrDA: " - irattach ${DEVICE} ${ARGS} > /dev/null 2>&1 & - sleep 1 - killall irattach > /dev/null 2>&1 - echo "$NAME." - ;; - *) - N=/etc/init.d/$NAME - echo "Usage: $N {start|stop|restart|force-reload}" >&2 - exit 1 - ;; -esac - diff --git a/openembedded/packages/irda-utils/irda-utils/configure.patch b/openembedded/packages/irda-utils/irda-utils/configure.patch deleted file mode 100644 index a36afe218..000000000 --- a/openembedded/packages/irda-utils/irda-utils/configure.patch +++ /dev/null @@ -1,25 +0,0 @@ - -# -# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher -# - ---- irda-utils-0.9.15/./irdadump/configure.in~configure -+++ irda-utils-0.9.15/./irdadump/configure.in -@@ -1,5 +1,6 @@ - dnl Process this file with autoconf to produce a configure script. --AC_INIT(configure.in) -+AC_INIT -+AC_CONFIG_SRCDIR([configure.in]) - AM_INIT_AUTOMAKE(libirdadump, 0.1) - AM_CONFIG_HEADER(config.h) - -@@ -18,7 +19,8 @@ - - dnl Checks for library functions. - --AC_OUTPUT([ -+AC_CONFIG_FILES([ - Makefile - src/Makefile - shell/Makefile]) -+AC_OUTPUT diff --git a/openembedded/packages/irda-utils/irda-utils/m4.patch b/openembedded/packages/irda-utils/irda-utils/m4.patch deleted file mode 100644 index 9c077bb24..000000000 --- a/openembedded/packages/irda-utils/irda-utils/m4.patch +++ /dev/null @@ -1,204 +0,0 @@ - -# -# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher -# - ---- /dev/null -+++ irda-utils-0.9.15/irdadump/m4/glib.m4 -@@ -0,0 +1,196 @@ -+# Configure paths for GLIB -+# Owen Taylor 97-11-3 -+ -+dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) -+dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or -+dnl gthread is specified in MODULES, pass to glib-config -+dnl -+AC_DEFUN(AM_PATH_GLIB, -+[dnl -+dnl Get the cflags and libraries from the glib-config script -+dnl -+AC_ARG_WITH(glib-prefix,[ --with-glib-prefix=PFX Prefix where GLIB is installed (optional)], -+ glib_config_prefix="$withval", glib_config_prefix="") -+AC_ARG_WITH(glib-exec-prefix,[ --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)], -+ glib_config_exec_prefix="$withval", glib_config_exec_prefix="") -+AC_ARG_ENABLE(glibtest, [ --disable-glibtest Do not try to compile and run a test GLIB program], -+ , enable_glibtest=yes) -+ -+ if test x$glib_config_exec_prefix != x ; then -+ glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix" -+ if test x${GLIB_CONFIG+set} != xset ; then -+ GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config -+ fi -+ fi -+ if test x$glib_config_prefix != x ; then -+ glib_config_args="$glib_config_args --prefix=$glib_config_prefix" -+ if test x${GLIB_CONFIG+set} != xset ; then -+ GLIB_CONFIG=$glib_config_prefix/bin/glib-config -+ fi -+ fi -+ -+ for module in . $4 -+ do -+ case "$module" in -+ gmodule) -+ glib_config_args="$glib_config_args gmodule" -+ ;; -+ gthread) -+ glib_config_args="$glib_config_args gthread" -+ ;; -+ esac -+ done -+ -+ AC_PATH_PROG(GLIB_CONFIG, glib-config, no) -+ min_glib_version=ifelse([$1], ,0.99.7,$1) -+ AC_MSG_CHECKING(for GLIB - version >= $min_glib_version) -+ no_glib="" -+ if test "$GLIB_CONFIG" = "no" ; then -+ no_glib=yes -+ else -+ GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags` -+ GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs` -+ glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \ -+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` -+ glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \ -+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` -+ glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \ -+ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` -+ if test "x$enable_glibtest" = "xyes" ; then -+ ac_save_CFLAGS="$CFLAGS" -+ ac_save_LIBS="$LIBS" -+ CFLAGS="$CFLAGS $GLIB_CFLAGS" -+ LIBS="$GLIB_LIBS $LIBS" -+dnl -+dnl Now check if the installed GLIB is sufficiently new. (Also sanity -+dnl checks the results of glib-config to some extent -+dnl -+ rm -f conf.glibtest -+ AC_TRY_RUN([ -+#include -+#include -+#include -+ -+int -+main () -+{ -+ int major, minor, micro; -+ char *tmp_version; -+ -+ system ("touch conf.glibtest"); -+ -+ /* HP/UX 9 (%@#!) writes to sscanf strings */ -+ tmp_version = g_strdup("$min_glib_version"); -+ if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { -+ printf("%s, bad version string\n", "$min_glib_version"); -+ exit(1); -+ } -+ -+ if ((glib_major_version != $glib_config_major_version) || -+ (glib_minor_version != $glib_config_minor_version) || -+ (glib_micro_version != $glib_config_micro_version)) -+ { -+ printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", -+ $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version, -+ glib_major_version, glib_minor_version, glib_micro_version); -+ printf ("*** was found! If glib-config was correct, then it is best\n"); -+ printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n"); -+ printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); -+ printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); -+ printf("*** required on your system.\n"); -+ printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n"); -+ printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n"); -+ printf("*** before re-running configure\n"); -+ } -+ else if ((glib_major_version != GLIB_MAJOR_VERSION) || -+ (glib_minor_version != GLIB_MINOR_VERSION) || -+ (glib_micro_version != GLIB_MICRO_VERSION)) -+ { -+ printf("*** GLIB header files (version %d.%d.%d) do not match\n", -+ GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION); -+ printf("*** library (version %d.%d.%d)\n", -+ glib_major_version, glib_minor_version, glib_micro_version); -+ } -+ else -+ { -+ if ((glib_major_version > major) || -+ ((glib_major_version == major) && (glib_minor_version > minor)) || -+ ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro))) -+ { -+ return 0; -+ } -+ else -+ { -+ printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n", -+ glib_major_version, glib_minor_version, glib_micro_version); -+ printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n", -+ major, minor, micro); -+ printf("*** GLIB is always available from ftp://ftp.gtk.org.\n"); -+ printf("***\n"); -+ printf("*** If you have already installed a sufficiently new version, this error\n"); -+ printf("*** probably means that the wrong copy of the glib-config shell script is\n"); -+ printf("*** being found. The easiest way to fix this is to remove the old version\n"); -+ printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n"); -+ printf("*** correct copy of glib-config. (In this case, you will have to\n"); -+ printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); -+ printf("*** so that the correct libraries are found at run-time))\n"); -+ } -+ } -+ return 1; -+} -+],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) -+ CFLAGS="$ac_save_CFLAGS" -+ LIBS="$ac_save_LIBS" -+ fi -+ fi -+ if test "x$no_glib" = x ; then -+ AC_MSG_RESULT(yes) -+ ifelse([$2], , :, [$2]) -+ else -+ AC_MSG_RESULT(no) -+ if test "$GLIB_CONFIG" = "no" ; then -+ echo "*** The glib-config script installed by GLIB could not be found" -+ echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in" -+ echo "*** your path, or set the GLIB_CONFIG environment variable to the" -+ echo "*** full path to glib-config." -+ else -+ if test -f conf.glibtest ; then -+ : -+ else -+ echo "*** Could not run GLIB test program, checking why..." -+ CFLAGS="$CFLAGS $GLIB_CFLAGS" -+ LIBS="$LIBS $GLIB_LIBS" -+ AC_TRY_LINK([ -+#include -+#include -+], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ], -+ [ echo "*** The test program compiled, but did not run. This usually means" -+ echo "*** that the run-time linker is not finding GLIB or finding the wrong" -+ echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your" -+ echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" -+ echo "*** to the installed location Also, make sure you have run ldconfig if that" -+ echo "*** is required on your system" -+ echo "***" -+ echo "*** If you have an old version installed, it is best to remove it, although" -+ echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" -+ echo "***" -+ echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that" -+ echo "*** came with the system with the command" -+ echo "***" -+ echo "*** rpm --erase --nodeps gtk gtk-devel" ], -+ [ echo "*** The test program failed to compile or link. See the file config.log for the" -+ echo "*** exact error that occured. This usually means GLIB was incorrectly installed" -+ echo "*** or that you have moved GLIB since it was installed. In the latter case, you" -+ echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ]) -+ CFLAGS="$ac_save_CFLAGS" -+ LIBS="$ac_save_LIBS" -+ fi -+ fi -+ GLIB_CFLAGS="" -+ GLIB_LIBS="" -+ ifelse([$3], , :, [$3]) -+ fi -+ AC_SUBST(GLIB_CFLAGS) -+ AC_SUBST(GLIB_LIBS) -+ rm -f conf.glibtest -+]) diff --git a/openembedded/packages/irda-utils/irda-utils_0.9.16.bb b/openembedded/packages/irda-utils/irda-utils_0.9.16.bb deleted file mode 100644 index db56a7044..000000000 --- a/openembedded/packages/irda-utils/irda-utils_0.9.16.bb +++ /dev/null @@ -1,32 +0,0 @@ -DESCRIPTION = "Provides common files needed to use IrDA. \ -IrDA allows communication over Infrared with other devices \ -such as phones and laptops." -SECTION = "base" -LICENSE = "GPL" -PR = "r5" - -SRC_URI = "${SOURCEFORGE_MIRROR}/irda/irda-utils-${PV}.tar.gz \ - file://configure.patch;patch=1 \ - file://m4.patch;patch=1 \ - file://init" - -export SYS_INCLUDES="-I${STAGING_INCDIR}" - -inherit autotools update-rc.d - -INITSCRIPT_NAME = "irattach" -INITSCRIPT_PARAMS = "defaults 20" - -do_compile () { - oe_runmake -e -C irattach - oe_runmake -e -C irdaping -} - -do_install () { - install -d ${D}${sbindir} - oe_runmake -C irattach ROOT="${D}" install - oe_runmake -C irdaping ROOT="${D}" install - - install -d ${D}${sysconfdir}/init.d - install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/irattach -} -- cgit v1.2.3