From 4b46c1f6e891b1ddd5968536440b888661fade3e Mon Sep 17 00:00:00 2001
From: Richard Purdie <richard@openedhand.com>
Date: Wed, 31 Aug 2005 10:45:47 +0000
Subject: Initial population

git-svn-id: https://svn.o-hand.com/repos/poky@1 311d38ba-8fff-0310-9ca6-ca027cbcb966
---
 .../pcmcia-cs/pcmcia-cs-3.2.8/automount.patch      | 19 +++++
 .../pcmcia-cs/pcmcia-cs-3.2.8/borzoi/ide.opts      | 28 +++++++
 .../pcmcia-cs/pcmcia-cs-3.2.8/busybox.patch        | 20 +++++
 .../packages/pcmcia-cs/pcmcia-cs-3.2.8/ide.opts    | 25 ++++++
 .../pcmcia-cs/pcmcia-cs-3.2.8/network.patch        | 92 ++++++++++++++++++++++
 .../pcmcia-cs/pcmcia-cs-3.2.8/nocleanup.patch      | 11 +++
 .../pcmcia-cs/pcmcia-cs-3.2.8/pcic-extra.patch     | 33 ++++++++
 .../pcmcia-cs/pcmcia-cs-3.2.8/ratoc-cfu1u.patch    | 23 ++++++
 .../pcmcia-cs/pcmcia-cs-3.2.8/spitz/ide.opts       | 28 +++++++
 .../pcmcia-cs/pcmcia-cs-3.2.8/wireless.opts        | 47 +++++++++++
 10 files changed, 326 insertions(+)
 create mode 100644 openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/automount.patch
 create mode 100644 openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/borzoi/ide.opts
 create mode 100644 openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/busybox.patch
 create mode 100644 openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/ide.opts
 create mode 100644 openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/network.patch
 create mode 100644 openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/nocleanup.patch
 create mode 100644 openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/pcic-extra.patch
 create mode 100644 openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/ratoc-cfu1u.patch
 create mode 100644 openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/spitz/ide.opts
 create mode 100644 openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/wireless.opts

(limited to 'openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8')

diff --git a/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/automount.patch b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/automount.patch
new file mode 100644
index 000000000..5f11147eb
--- /dev/null
+++ b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/automount.patch
@@ -0,0 +1,19 @@
+--- pcmcia-cs-3.2.8/etc/shared.orig	2004-12-15 02:21:11.000000000 +0100
++++ pcmcia-cs-3.2.8/etc/shared	2004-12-27 17:09:51.000000000 +0100
+@@ -55,8 +55,15 @@
+     fi
+     if is_true $DO_MOUNT ; then
+ 	O=${OPTS:+-o $OPTS} ; FS=${FSTYPE:+-t $FSTYPE}
+-	log mount $O $FS $1 $MOUNTPT || return 1
++	if test -x /etc/pcmcia/ide_automount
++	then
++		/etc/pcmcia/ide_automount
++	else
++		log mount $O $FS $1 $MOUNTPT || return 1
++	fi
+     fi
++
++	logger "SHARED [$MOUNTPT] [$1]"
+     return 0
+ }
+ 
diff --git a/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/borzoi/ide.opts b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/borzoi/ide.opts
new file mode 100644
index 000000000..c67df8e34
--- /dev/null
+++ b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/borzoi/ide.opts
@@ -0,0 +1,28 @@
+# ATA/IDE drive adapter configuration
+#
+# The address format is "scheme,socket,serial_no[,part]".
+#
+# For multi-partition devices, first return list of partitions in
+# $PARTS.  Then, we'll get called for each partition.
+#
+case "$ADDRESS" in
+*,1,*,*)
+    # Socket 1 is the internal HD; don't do anything clever as it's /
+    ;;
+*,*,*,1)
+    #INFO="Sample IDE setup"
+    DO_FSTAB="n";
+    #DO_FSCK="y" ;
+    DO_MOUNT="y"
+    #FSTYPE="msdos"
+    #FSTYPE="auto"
+    #OPTS=""
+    #MOUNTPT="/mnt/ide"
+    ;;
+*,*,*)
+    PARTS="1"
+    # Card eject policy options
+    NO_CHECK=n
+    NO_FUSER=y
+    ;;
+esac
diff --git a/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/busybox.patch b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/busybox.patch
new file mode 100644
index 000000000..7237f3b81
--- /dev/null
+++ b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/busybox.patch
@@ -0,0 +1,20 @@
+--- pcmcia-cs-3.2.3/etc/shared~ide	2003-03-11 10:26:14.000000000 -0600
++++ pcmcia-cs-3.2.3/etc/shared	2003-03-11 10:32:39.000000000 -0600
+@@ -57,7 +57,7 @@
+     fi
+     if is_true $DO_MOUNT ; then
+ 	O=${OPTS:+-o $OPTS} ; FS=${FSTYPE:+-t $FSTYPE}
+-	log mount -v $O $FS $1 $MOUNTPT || return 1
++	log mount $O $FS $1 $MOUNTPT || return 1
+     fi
+     return 0
+ }
+@@ -85,7 +85,7 @@
+     test -b $1 || return 1
+     do_fuser -k -m $1 > /dev/null
+     if mount | grep -q "$1 on" ; then
+-	log umount -v $1 || return 1
++	log umount $1 || return 1
+     fi
+     if is_true $DO_FSTAB ; then
+ 	grep -v $1 /etc/fstab > /etc/fstab.N
diff --git a/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/ide.opts b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/ide.opts
new file mode 100644
index 000000000..d13dab001
--- /dev/null
+++ b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/ide.opts
@@ -0,0 +1,25 @@
+# ATA/IDE drive adapter configuration
+#
+# The address format is "scheme,socket,serial_no[,part]".
+#
+# For multi-partition devices, first return list of partitions in
+# $PARTS.  Then, we'll get called for each partition.
+#
+case "$ADDRESS" in
+*,*,*,1)
+    #INFO="Sample IDE setup"
+    DO_FSTAB="n";
+    #DO_FSCK="y" ;
+    DO_MOUNT="y"
+    #FSTYPE="msdos"
+    #FSTYPE="auto"
+    #OPTS=""
+    #MOUNTPT="/mnt/ide"
+    ;;
+*,*,*)
+    PARTS="1"
+    # Card eject policy options
+    NO_CHECK=n
+    NO_FUSER=y
+    ;;
+esac
diff --git a/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/network.patch b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/network.patch
new file mode 100644
index 000000000..fb808e209
--- /dev/null
+++ b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/network.patch
@@ -0,0 +1,92 @@
+--- pcmcia-cs/etc/network.old	2004-07-01 00:31:59.000000000 +0100
++++ pcmcia-cs/etc/network	2004-07-01 00:32:57.000000000 +0100
+@@ -31,16 +31,39 @@
+ 
+ RESOLV=/etc/resolv.conf
+ 
++# if this interface has an entry in /etc/network/interfaces, let ifupdown
++# handle it
++if grep -q "iface \+$DEVICE" /etc/network/interfaces; then
++  case $ACTION in
++    start)
++    	ifup $DEVICE
++    	;;
++    stop)
++    	ifdown $DEVICE
++    	;;
++    restart)
++    	ifdown $DEVICE
++    	ifup $DEVICE
++    	;;
++  esac
++  
++  exit 0
++fi
++
++## see if it is a wireless card. Jamey and AntiProxy
++CHECK_WIRELESS=`grep "$DEVICE" /proc/net/wireless`
++if [ -n "$CHECK_WIRELESS" ] ; then
+ # Now, run the specific script for Wireless LAN interfaces
+ # Note : we need the wireless parameters to be set up before IP parameters,
+ # so that we can perform DHCP over the Wireless link if needed. Jean II
+-O_INFO=$INFO ; INFO=
+-if [ -x ./wireless ] ; then
+-    . ./wireless
+-else
+-    . /etc/pcmcia/wireless
++    O_INFO=$INFO ; INFO=
++    if [ -x ./wireless ] ; then
++	. ./wireless
++    else
++	. /etc/pcmcia/wireless
++    fi
++    INFO=$O_INFO
+ fi
+-INFO=$O_INFO
+ 
+ bootp_setup ()
+ {
+@@ +225,6 -188,11 @@
+ 		fi
+ 		/sbin/dhcpcd -XYZZY 2>&1 | grep -q DHCP || \
+ 		    rm -f /var/run/dhcpcd-$DEVICE.pid
++  	    # modified for udhcpc
++	    elif [ -x /sbin/udhcpc ] ; then
++		PID=`cat /var/run/udhcpc.$DEVICE.pid 2>/dev/null`
++		if [ -n "$PID" ] ; then kill -TERM $PID ; fi
++	    # end of modification
+ 	    elif [ -x /sbin/dhclient ] ; then
+ 		PID=`cat /var/run/dhclient.pid 2>/dev/null`
+ 		if [ -n "$PID" ] ; then kill -TERM $PID ; fi
+@@ +282,7 -250,30 @@
+     [ -n "$IPADDR" ] && /sbin/ifconfig $DEVICE down up
+     ;;
+ 
++'resume')
++    #logger RESUME EVENT PCMCIA SEEN FROM CARDMGR
++    if [ -z "$IPADDR" ] || is_true $DHCP ; then
++        if [ ! -x /sbin/dhcpcd ] && [ -x /sbin/udhcpc ] ; then
++              PID=`cat /var/run/udhcpc.$DEVICE.pid 2>/dev/null`
++              if [ -n "$PID" ] ; then
++                 kill -USR1 $PID
++              fi
++        fi
++    fi
++    ;;
++    
++'suspend')
++    #logger SUSPEND EVENT SEEN FROM CARDMGR
++# ## uncomment this code below if you get problems where
++# ## you are getting in IP conflict upon resume on DHCP networks
++#    if [ -z "$IPADDR" ] || is_true $DHCP ; then
++#        if [ ! -x /sbin/dhcpcd ] && [ -x /sbin/udhcpc ] ; then
++#	      PID=`cat /var/run/udhcpc.$DEVICE.pid 2>/dev/null`
++#       	      if [ -n "$PID" ] ; then
++#                 ifconfig $DEVICE 0.0.0.0
++#              fi
++#        fi
++#    fi
+-'suspend'|'resume')
+     ;;
+ 
+ *)
diff --git a/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/nocleanup.patch b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/nocleanup.patch
new file mode 100644
index 000000000..afebb5a9b
--- /dev/null
+++ b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/nocleanup.patch
@@ -0,0 +1,11 @@
+--- pcmcia-cs-3.2.8/etc/rc.pcmcia.orig	2005-04-22 23:14:56.308784152 +0100
++++ pcmcia-cs-3.2.8/etc/rc.pcmcia	2005-04-22 23:15:34.637957232 +0100
+@@ -140,7 +140,7 @@
+ 	echo -n "Shutting down PCMCIA services: "
+ 	if [ -s /var/run/cardmgr.pid ] ; then
+ 	    PID=`cat /var/run/cardmgr.pid`
+-	    kill $PID
++	    kill -9 $PID
+ 	    # Give cardmgr a few seconds to handle the signal
+ 	    for N in 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 ; do
+ 		kill -0 $PID 2>/dev/null || break
diff --git a/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/pcic-extra.patch b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/pcic-extra.patch
new file mode 100644
index 000000000..e78d0c5c6
--- /dev/null
+++ b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/pcic-extra.patch
@@ -0,0 +1,33 @@
+
+#
+# Patch managed by http://www.holgerschurig.de/patcher.html
+#
+
+--- pcmcia-cs-3.2.8/etc/rc.pcmcia~pcic-extra
++++ pcmcia-cs-3.2.8/etc/rc.pcmcia
+@@ -105,10 +105,16 @@
+ 		   echo "using yenta_socket instead of $PCIC") ||
+ 		  /sbin/modprobe $PCIC $PCIC_OPTS || break
+ 		/sbin/modprobe ds || break
++		if [ "x$PCIC_EXTRA" != "x" ]; then
++		   /sbin/modprobe $PCIC_EXTRA
++		fi
+ 	    elif [ -d $PC ] ; then
+ 		/sbin/insmod $PC/pcmcia_core.o $CORE_OPTS
+ 		/sbin/insmod $PC/$PCIC.o $PCIC_OPTS
+ 		/sbin/insmod $PC/ds.o
++		if [ "x$PCIC_EXTRA" != "x" ]; then
++		  /sbin/insmod $PC/$PCIC_EXTRA
++		fi
+ 	    else
+ 		echo "module directory $PC not found."
+ 		break
+@@ -154,7 +160,7 @@
+ 	;;
+ 
+     status)
+-	pid=`/sbin/pidof cardmgr`
++	pid=`/bin/pidof cardmgr`
+ 	if [ "$pid" != "" ] ; then
+ 	    echo "cardmgr (pid $pid) is running..."
+ 	    EXITCODE=0
diff --git a/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/ratoc-cfu1u.patch b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/ratoc-cfu1u.patch
new file mode 100644
index 000000000..069aa65bd
--- /dev/null
+++ b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/ratoc-cfu1u.patch
@@ -0,0 +1,23 @@
+--- pcmcia-cs/etc/config	2005-02-06 17:02:39.714620456 +1300
++++ pcmcia-cs/etc/config	2005-02-06 17:05:06.123362944 +1300
+@@ -131,6 +131,9 @@
+ device "ohci1394_cb"
+   class "ieee1394" module "cb_enabler", "ohci1394_cb"
+ 
++device "hc_sl811_cs"
++  class "usb" module "usbcore", "hc_sl811", "hc_sl811_cs"		
++
+ # dummy drivers
+ 
+ device "dummy_cs" module "dummy_cs"
+@@ -2169,6 +2172,10 @@
+   manfid 0x0137, 0x0003
+   bind "parport_cs"
+ 
++card "RATOC USB HOST CF+ Card"
++  manfid 0xc015, 0x0001
++  bind "hc_sl811_cs"
++
+ card "TELES S0/PC ISDN"
+   version "TELES", "S0/PC"
+   bind "teles_cs"
diff --git a/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/spitz/ide.opts b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/spitz/ide.opts
new file mode 100644
index 000000000..c67df8e34
--- /dev/null
+++ b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/spitz/ide.opts
@@ -0,0 +1,28 @@
+# ATA/IDE drive adapter configuration
+#
+# The address format is "scheme,socket,serial_no[,part]".
+#
+# For multi-partition devices, first return list of partitions in
+# $PARTS.  Then, we'll get called for each partition.
+#
+case "$ADDRESS" in
+*,1,*,*)
+    # Socket 1 is the internal HD; don't do anything clever as it's /
+    ;;
+*,*,*,1)
+    #INFO="Sample IDE setup"
+    DO_FSTAB="n";
+    #DO_FSCK="y" ;
+    DO_MOUNT="y"
+    #FSTYPE="msdos"
+    #FSTYPE="auto"
+    #OPTS=""
+    #MOUNTPT="/mnt/ide"
+    ;;
+*,*,*)
+    PARTS="1"
+    # Card eject policy options
+    NO_CHECK=n
+    NO_FUSER=y
+    ;;
+esac
diff --git a/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/wireless.opts b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/wireless.opts
new file mode 100644
index 000000000..3e498297f
--- /dev/null
+++ b/openembedded/packages/pcmcia-cs/pcmcia-cs-3.2.8/wireless.opts
@@ -0,0 +1,47 @@
+# Wireless LAN adapter configuration
+#
+# Theory of operation : 
+#
+# The script attempts to match a block of settings to the specific wireless
+# card inserted, the *first* block matching the card is used.
+# The address format is "scheme,socket,instance,hwaddr", with * as a wildcard.
+# 'scheme' is the pcmcia scheme (set via 'cardctl scheme XXX').
+# 'hwaddr' is the unique MAC address identifier of the wireless card.
+# The MAC address is usually printed on the card, or can be found via ifconfig.
+# Some examples here use only half of the MAC address with a wildcard to
+# match a whole family of cards...
+#
+# All the Wireless specific configuration is done through the Wireless
+# Extensions, so we will just call 'iwconfig' with the right parameters
+# defined below.
+# Of course, you need to have iwconfig installled on your system.
+# To download iwconfig, or for more info on Wireless Extensions :
+#	http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html
+#
+# Note : you don't need to fill all parameters, leave them blank, in most
+# cases the driver will initialise itself with sane defaults values or
+# automatically figure out the value... And no drivers do support all
+# possible settings...
+#
+# If you make any mistakes, you'll get a cryptic message in the system
+# log.  You'll need to figure out on your own which parameter was wrong:
+#     cardmgr[310]: executing: './network start wvlan0'
+#     cardmgr[310]: + SIOCSIWMODE: Invalid argument
+# I've tried to give more troubleshooting help at :
+#	http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html#debug
+# In case of doubts, just check "/etc/pcmcia/wireless" for the gory details...
+#
+# Note also that this script will work only with the original Pcmcia scripts,
+# and not with the default Red Hat scripts. Send a bug report to Red Hat ;-)
+#
+# Finally, send comments and flames to me, Jean Tourrilhes <jt@hpl.hp.com>
+#
+
+case "$ADDRESS" in
+*,*,*,*)
+    INFO="Default Config"
+    ESSID=any
+    MODE=Managed
+    RATE=auto
+    ;;
+esac
-- 
cgit v1.2.3