From 30285dd379000284555a38c80b7d4dad472fe515 Mon Sep 17 00:00:00 2001 From: Richard Purdie Date: Tue, 9 May 2006 19:35:13 +0000 Subject: More packages merging with OE git-svn-id: https://svn.o-hand.com/repos/poky/trunk@390 311d38ba-8fff-0310-9ca6-ca027cbcb966 --- .../packages/wpa-supplicant/files/defaults-sane | 8 + .../packages/wpa-supplicant/files/defconfig-gnutls | 176 +++++++++++++++++++++ .../wpa-supplicant/files/slugos/defaults-sane | 8 + .../wpa-supplicant/files/wpa_supplicant.conf-sane | 7 + 4 files changed, 199 insertions(+) create mode 100644 openembedded/packages/wpa-supplicant/files/defaults-sane create mode 100644 openembedded/packages/wpa-supplicant/files/defconfig-gnutls create mode 100644 openembedded/packages/wpa-supplicant/files/slugos/defaults-sane create mode 100644 openembedded/packages/wpa-supplicant/files/wpa_supplicant.conf-sane (limited to 'openembedded/packages/wpa-supplicant/files') diff --git a/openembedded/packages/wpa-supplicant/files/defaults-sane b/openembedded/packages/wpa-supplicant/files/defaults-sane new file mode 100644 index 000000000..67c4cbddf --- /dev/null +++ b/openembedded/packages/wpa-supplicant/files/defaults-sane @@ -0,0 +1,8 @@ +# Useful flags: +# -i Interface (required, unless specified in config) +# -D Wireless Driver +# -d Debugging (-dd for more) +# -q Quiet (-qq for more) + +CONFIG="/etc/wpa_supplicant.conf" +OPTIONS="-i eth1 -D wext" diff --git a/openembedded/packages/wpa-supplicant/files/defconfig-gnutls b/openembedded/packages/wpa-supplicant/files/defconfig-gnutls new file mode 100644 index 000000000..2df5e51df --- /dev/null +++ b/openembedded/packages/wpa-supplicant/files/defconfig-gnutls @@ -0,0 +1,176 @@ +# This file lists the configuration options that are used when building the +# hostapd binary. All lines starting with # are ignored. Configuration option +# lines must be commented out complete, if they are not to be included, i.e., +# just setting VARIABLE=n is not disabling that variable. +# +# This file is included in Makefile, so variables like CFLAGS and LIBS can also +# be modified from here. In most cass, these lines should use += in order not +# to override previous values of the variables. + +CFLAGS = $(TARGET_CFLAGS) -I../hostapd -I../utils -I../driver/modules -Wall -MMD +LIBS = $(TARGET_LDFLAGS) + +# Driver interface for Host AP driver +CONFIG_DRIVER_HOSTAP=y + +# Driver interface for Agere driver +#CONFIG_DRIVER_HERMES=n + +# Driver interface for madwifi driver +#CONFIG_DRIVER_MADWIFI=y + +# Driver interface for Prism54 driver +#CONFIG_DRIVER_PRISM54=y + +# Driver interface for ndiswrapper +#CONFIG_DRIVER_NDISWRAPPER=y + +# Driver interface for Atmel driver +#CONFIG_DRIVER_ATMEL=y + +# Driver interface for Broadcom driver +#CONFIG_DRIVER_BROADCOM=y + +# Driver interface for Intel ipw2100 driver +#CONFIG_DRIVER_IPW2100=y + +# Driver interface for generic Linux wireless extensions +CONFIG_DRIVER_WEXT=y + +# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) +#CONFIG_DRIVER_BSD=y +#CFLAGS += -I/usr/local/include +#LIBS += -L/usr/local/lib + +# Driver interface for development testing +#CONFIG_DRIVER_TEST=y + +# Driver interface for wired Ethernet drivers +CONFIG_DRIVER_WIRED=y + +# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is +# included) +CONFIG_IEEE8021X_EAPOL=y + +# EAP-MD5 (automatically included if EAP-TTLS is enabled) +CONFIG_EAP_MD5=y + +# EAP-MSCHAPv2 (automatically included if EAP-PEAP is enabled) +CONFIG_EAP_MSCHAPV2=y + +# EAP-TLS +CONFIG_EAP_TLS=y + +# EAL-PEAP +CONFIG_EAP_PEAP=y + +# EAP-TTLS +CONFIG_EAP_TTLS=y + +# EAP-GTC +CONFIG_EAP_GTC=y + +# EAP-OTP +CONFIG_EAP_OTP=y + +# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) +#CONFIG_EAP_SIM=y + +# EAP-PSK (experimental; this is _not_ needed for WPA-PSK) +#CONFIG_EAP_PSK=y + +# EAP-PAX +#CONFIG_EAP_PAX=y + +# LEAP +CONFIG_EAP_LEAP=y + +# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) +#CONFIG_EAP_AKA=y + +# PKCS#12 (PFX) support (used to read private key and certificate file from +# a file that usually has extension .p12 or .pfx) +CONFIG_PKCS12=y + +# Smartcard support (i.e., private key on a smartcard), e.g., with openssl +# engine. +CONFIG_SMARTCARD=y + +# PC/SC interface for smartcards (USIM, GSM SIM) +# Enable this if EAP-SIM or EAP-AKA is included +#CONFIG_PCSC=y + +# Development testing +#CONFIG_EAPOL_TEST=y + +# Replace native Linux implementation of packet sockets with libdnet/libpcap. +# This will be automatically set for non-Linux OS. +#CONFIG_DNET_PCAP=y + +# Include control interface for external programs, e.g, wpa_cli +CONFIG_CTRL_IFACE=y + +# Include support for GNU Readline and History Libraries in wpa_cli. +# When building a wpa_cli binary for distribution, please note that these +# libraries are licensed under GPL and as such, BSD license may not apply for +# the resulting binary. +#CONFIG_READLINE=y + +# Remove debugging code that is printing out debug message to stdout. +# This can be used to reduce the size of the wpa_supplicant considerably +# if debugging code is not needed. The size reduction can be around 35% +# (e.g., 90 kB). +#CONFIG_NO_STDOUT_DEBUG=y + +# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save +# 35-50 kB in code size. +#CONFIG_NO_WPA=y + +# Select configuration backend: +# file = text file (e.g., wpa_supplicant.conf) +# winreg = Windows registry (see win_example.reg for an example) +CONFIG_BACKEND=file + +# Select program entry point implementation: +# main = UNIX/POSIX like main() function (default) +# main_winsvc = Windows service (read parameters from registry) +# main_none = Very basic example (development use only) +#CONFIG_MAIN=main + +# Select wrapper for operatins system and C library specific functions +# unix = UNIX/POSIX like systems (default) +# win32 = Windows systems +# none = Empty template +#CONFIG_OS=unix + +# Select event loop implementation +# eloop = select() loop (default) +# eloop_win = Windows events and WaitForMultipleObject() loop +# eloop_none = Empty template +#CONFIG_ELOOP=eloop + +# Select layer 2 packet implementation +# linux = Linux packet socket (default) +# pcap = libpcap/libdnet/WinPcap +# freebsd = FreeBSD libpcap +# winpcap = WinPcap with receive thread +# none = Empty template +#CONFIG_L2_PACKET=linux + +# IEEE 802.11i/IEEE 802.11e STAKey negotiation for direct link connection +#CONFIG_STAKEY=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) +# none = Empty template +CONFIG_TLS=gnutls + +# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. +# You need CONFIG_TLS=gnutls for this to have any effect. Please note that +# even though the core GnuTLS library is released under LGPL, this extra +# library uses GPL and as such, the terms of GPL apply to the combination +# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not +# apply for distribution of the resulting binary. +CONFIG_GNUTLS_EXTRA=y + diff --git a/openembedded/packages/wpa-supplicant/files/slugos/defaults-sane b/openembedded/packages/wpa-supplicant/files/slugos/defaults-sane new file mode 100644 index 000000000..df4268b3a --- /dev/null +++ b/openembedded/packages/wpa-supplicant/files/slugos/defaults-sane @@ -0,0 +1,8 @@ +# Useful flags: +# -i Interface (required, unless specified in config) +# -D Wireless Driver +# -d Debugging (-dd for more) +# -q Quiet (-qq for more) + +CONFIG="/etc/wpa_supplicant.conf" +OPTIONS="-i ath0 -D madwifi" diff --git a/openembedded/packages/wpa-supplicant/files/wpa_supplicant.conf-sane b/openembedded/packages/wpa-supplicant/files/wpa_supplicant.conf-sane new file mode 100644 index 000000000..c91ffe0c8 --- /dev/null +++ b/openembedded/packages/wpa-supplicant/files/wpa_supplicant.conf-sane @@ -0,0 +1,7 @@ +ctrl_interface=/var/run/wpa_supplicant +ctrl_interface_group=0 +update_config=1 + +network={ + key_mgmt=NONE +} -- cgit v1.2.3