BB_DEFAULT_TASK ?= "build"

inherit patch
inherit staging

inherit mirrors
inherit utils
inherit utility-tasks
inherit metadata_scm

die() {
	oefatal "$*"
}

oenote() {
	echo "NOTE:" "$*"
}

oewarn() {
	echo "WARNING:" "$*"
}

oefatal() {
	echo "FATAL:" "$*"
	exit 1
}

oedebug() {
	test $# -ge 2 || {
		echo "Usage: oedebug level \"message\""
		exit 1
	}

	test ${OEDEBUG:-0} -ge $1 && {
		shift
		echo "DEBUG:" $*
	}
}

oe_runmake() {
	if [ x"$MAKE" = x ]; then MAKE=make; fi
	oenote ${MAKE} ${EXTRA_OEMAKE} "$@"
	${MAKE} ${EXTRA_OEMAKE} "$@" || die "oe_runmake failed"
}


def package_stagefile(file, d):

    if bb.data.getVar('PSTAGING_ACTIVE', d, True) == "1":
        destfile = file.replace(bb.data.getVar("TMPDIR", d, 1), bb.data.getVar("PSTAGE_TMPDIR_STAGE", d, 1))
        bb.mkdirhier(os.path.dirname(destfile))
        #print "%s to %s" % (file, destfile)
        bb.copyfile(file, destfile)

package_stagefile_shell() {
	if [ "$PSTAGING_ACTIVE" = "1" ]; then
		srcfile=$1
		destfile=`echo $srcfile | sed s#${TMPDIR}#${PSTAGE_TMPDIR_STAGE}#`
		destdir=`dirname $destfile`
		mkdir -p $destdir
		cp -dp $srcfile $destfile
	fi
}

def base_dep_prepend(d):
	#
	# Ideally this will check a flag so we will operate properly in
	# the case where host == build == target, for now we don't work in
	# that case though.
	#

	deps = ""
    
	# bb.utils.sha256_file() will return None on Python 2.4 because hashlib
	# isn't present.  In this case we use a shasum-native to checksum, so if
	# hashlib isn't present then add shasum-native to the dependencies.
	try:
		import hashlib
	except ImportError:
		# Adding shasum-native as a dependency of shasum-native would be
		# stupid, so don't do that.
		if bb.data.getVar('PN', d, True) != "shasum-native":
			deps = "shasum-native "
            
	# INHIBIT_DEFAULT_DEPS doesn't apply to the patch command.  Whether or  not
	# we need that built is the responsibility of the patch function / class, not
	# the application.
	if not bb.data.getVar('INHIBIT_DEFAULT_DEPS', d):
		if (bb.data.getVar('HOST_SYS', d, 1) !=
	     	    bb.data.getVar('BUILD_SYS', d, 1)):
			deps += " virtual/${TARGET_PREFIX}gcc virtual/${TARGET_PREFIX}compilerlibs virtual/libc "
	return deps

DEPENDS_prepend="${@base_dep_prepend(d)} "
DEPENDS_virtclass-native_prepend="${@base_dep_prepend(d)} "
DEPENDS_virtclass-nativesdk_prepend="${@base_dep_prepend(d)} "


def base_set_filespath(path, d):
	filespath = []
	# The ":" ensures we have an 'empty' override
	overrides = (bb.data.getVar("OVERRIDES", d, 1) or "") + ":"
	for p in path:
		for o in overrides.split(":"):
			filespath.append(os.path.join(p, o))
	return ":".join(filespath)

FILESPATH = "${@base_set_filespath([ "${FILE_DIRNAME}/${PF}", "${FILE_DIRNAME}/${P}", "${FILE_DIRNAME}/${PN}", "${FILE_DIRNAME}/${BP}", "${FILE_DIRNAME}/${BPN}", "${FILE_DIRNAME}/files", "${FILE_DIRNAME}" ], d)}"

SCENEFUNCS += "base_scenefunction"
	
python base_scenefunction () {
	stamp = bb.data.getVar('STAMP', d, 1) + ".needclean"
	if os.path.exists(stamp):
	        bb.build.exec_func("do_clean", d)
}

python base_do_setscene () {
        for f in (bb.data.getVar('SCENEFUNCS', d, 1) or '').split():
                bb.build.exec_func(f, d)
	if not os.path.exists(bb.data.getVar('STAMP', d, 1) + ".do_setscene"):
		bb.build.make_stamp("do_setscene", d)
}
do_setscene[selfstamp] = "1"
addtask setscene before do_fetch

addtask fetch
do_fetch[dirs] = "${DL_DIR}"
python base_do_fetch() {
	import sys

	localdata = bb.data.createCopy(d)
	bb.data.update_data(localdata)

	src_uri = bb.data.getVar('SRC_URI', localdata, 1)
	if not src_uri:
		return 1

	try:
		bb.fetch.init(src_uri.split(),d)
	except bb.fetch.NoMethodError:
		(type, value, traceback) = sys.exc_info()
		raise bb.build.FuncFailed("No method: %s" % value)
	except bb.MalformedUrl:
		(type, value, traceback) = sys.exc_info()
		raise bb.build.FuncFailed("Malformed URL: %s" % value)

	try:
		bb.fetch.go(localdata)
	except bb.fetch.MissingParameterError:
		(type, value, traceback) = sys.exc_info()
		raise bb.build.FuncFailed("Missing parameters: %s" % value)
	except bb.fetch.FetchError:
		(type, value, traceback) = sys.exc_info()
		raise bb.build.FuncFailed("Fetch failed: %s" % value)
	except bb.fetch.MD5SumError:
		(type, value, traceback) = sys.exc_info()
		raise bb.build.FuncFailed("MD5  failed: %s" % value)
	except:
		(type, value, traceback) = sys.exc_info()
		raise bb.build.FuncFailed("Unknown fetch Error: %s" % value)


	# Verify the SHA and MD5 sums we have in OE and check what do
	# in
	check_sum = bb.which(bb.data.getVar('BBPATH', d, True), "conf/checksums.ini")
	if not check_sum:
		bb.note("No conf/checksums.ini found, not checking checksums")
		return

	try:
		parser = base_chk_load_parser(check_sum)
	except:
		bb.note("Creating the CheckSum parser failed")
		return

	pv = bb.data.getVar('PV', d, True)
	pn = bb.data.getVar('PN', d, True)

	# Check each URI
	for url in src_uri.split():
		localpath = bb.data.expand(bb.fetch.localpath(url, localdata), localdata)
		(type,host,path,_,_,_) = bb.decodeurl(url)
		uri = "%s://%s%s" % (type,host,path)
		try:
			if type == "http" or type == "https" or type == "ftp" or type == "ftps":
				if not base_chk_file(parser, pn, pv,uri, localpath, d):
					bb.note("%s-%s: %s has no entry in conf/checksums.ini, not checking URI" % (pn,pv,uri))
		except Exception:
			raise bb.build.FuncFailed("Checksum of '%s' failed" % uri)
}

def subprocess_setup():
	import signal
	# Python installs a SIGPIPE handler by default. This is usually not what
	# non-Python subprocesses expect.
	# SIGPIPE errors are known issues with gzip/bash
	signal.signal(signal.SIGPIPE, signal.SIG_DFL)

def oe_unpack_file(file, data, url = None):
	import subprocess
	if not url:
		url = "file://%s" % file
	dots = file.split(".")
	if dots[-1] in ['gz', 'bz2', 'Z']:
		efile = os.path.join(bb.data.getVar('WORKDIR', data, 1),os.path.basename('.'.join(dots[0:-1])))
	else:
		efile = file
	cmd = None
	if file.endswith('.tar'):
		cmd = 'tar x --no-same-owner -f %s' % file
	elif file.endswith('.tgz') or file.endswith('.tar.gz') or file.endswith('.tar.Z'):
		cmd = 'tar xz --no-same-owner -f %s' % file
	elif file.endswith('.tbz') or file.endswith('.tbz2') or file.endswith('.tar.bz2'):
		cmd = 'bzip2 -dc %s | tar x --no-same-owner -f -' % file
	elif file.endswith('.gz') or file.endswith('.Z') or file.endswith('.z'):
		cmd = 'gzip -dc %s > %s' % (file, efile)
	elif file.endswith('.bz2'):
		cmd = 'bzip2 -dc %s > %s' % (file, efile)
	elif file.endswith('.tar.xz'):
		cmd = 'xz -dc %s | tar x --no-same-owner -f -' % file
	elif file.endswith('.xz'):
		cmd = 'xz -dc %s > %s' % (file, efile)
	elif file.endswith('.zip') or file.endswith('.jar'):
		cmd = 'unzip -q -o'
		(type, host, path, user, pswd, parm) = bb.decodeurl(url)
		if 'dos' in parm:
			cmd = '%s -a' % cmd
		cmd = "%s '%s'" % (cmd, file)
	elif os.path.isdir(file):
		filesdir = os.path.realpath(bb.data.getVar("FILESDIR", data, 1))
		destdir = "."
		if file[0:len(filesdir)] == filesdir:
			destdir = file[len(filesdir):file.rfind('/')]
			destdir = destdir.strip('/')
			if len(destdir) < 1:
				destdir = "."
			elif not os.access("%s/%s" % (os.getcwd(), destdir), os.F_OK):
				os.makedirs("%s/%s" % (os.getcwd(), destdir))
		cmd = 'cp -pPR %s %s/%s/' % (file, os.getcwd(), destdir)
	else:
		(type, host, path, user, pswd, parm) = bb.decodeurl(url)
		if not 'patch' in parm:
			# The "destdir" handling was specifically done for FILESPATH
			# items.  So, only do so for file:// entries.
			if type == "file":
				destdir = bb.decodeurl(url)[1] or "."
			else:
				destdir = "."
			bb.mkdirhier("%s/%s" % (os.getcwd(), destdir))
			cmd = 'cp %s %s/%s/' % (file, os.getcwd(), destdir)

	if not cmd:
		return True

	dest = os.path.join(os.getcwd(), os.path.basename(file))
	if os.path.exists(dest):
		if os.path.samefile(file, dest):
			return True

	# Change to subdir before executing command
	save_cwd = os.getcwd();
	parm = bb.decodeurl(url)[5]
	if 'subdir' in parm:
		newdir = ("%s/%s" % (os.getcwd(), parm['subdir']))
		bb.mkdirhier(newdir)
		os.chdir(newdir)

	cmd = "PATH=\"%s\" %s" % (bb.data.getVar('PATH', data, 1), cmd)
	bb.note("Unpacking %s to %s/" % (file, os.getcwd()))
	ret = subprocess.call(cmd, preexec_fn=subprocess_setup, shell=True)

	os.chdir(save_cwd)

	return ret == 0

addtask unpack after do_fetch
do_unpack[dirs] = "${WORKDIR}"
python base_do_unpack() {
	import re

	localdata = bb.data.createCopy(d)
	bb.data.update_data(localdata)

	src_uri = bb.data.getVar('SRC_URI', localdata, True)
	if not src_uri:
		return
	for url in src_uri.split():
		try:
			local = bb.data.expand(bb.fetch.localpath(url, localdata), localdata)
		except bb.MalformedUrl, e:
			raise FuncFailed('Unable to generate local path for malformed uri: %s' % e)
		local = os.path.realpath(local)
		ret = oe_unpack_file(local, localdata, url)
		if not ret:
			raise bb.build.FuncFailed()
}

GIT_CONFIG = "${STAGING_DIR_NATIVE}/usr/etc/gitconfig"

def generate_git_config(e):
        from bb import data

        if data.getVar('GIT_CORE_CONFIG', e.data, True):
                gitconfig_path = bb.data.getVar('GIT_CONFIG', e.data, True)
                proxy_command = "    gitproxy = %s\n" % data.getVar('GIT_PROXY_COMMAND', e.data, True)

                bb.mkdirhier(bb.data.expand("${STAGING_DIR_NATIVE}/usr/etc/", e.data))
                if (os.path.exists(gitconfig_path)):
                        os.remove(gitconfig_path)

                f = open(gitconfig_path, 'w')
                f.write("[core]\n")
                ignore_hosts = data.getVar('GIT_PROXY_IGNORE', e.data, True).split()
                for ignore_host in ignore_hosts:
                        f.write("    gitproxy = none for %s\n" % ignore_host)
                f.write(proxy_command)
                f.close

addhandler base_eventhandler
python base_eventhandler() {
	from bb import note, error, data
	from bb.event import getName

	messages = {}
	messages["Completed"] = "completed"
	messages["Succeeded"] = "completed"
	messages["Started"] = "started"
	messages["Failed"] = "failed"

	name = getName(e)
	msg = ""
	if name.startswith("Pkg"):
		msg += "package %s: " % data.getVar("P", e.data, 1)
		msg += messages.get(name[3:]) or name[3:]
	elif name.startswith("Task"):
		msg += "package %s: task %s: " % (data.getVar("PF", e.data, 1), e.task)
		msg += messages.get(name[4:]) or name[4:]
	elif name.startswith("Build"):
		msg += "build %s: " % e.name
		msg += messages.get(name[5:]) or name[5:]
	elif name == "UnsatisfiedDep":
		msg += "package %s: dependency %s %s" % (e.pkg, e.dep, name[:-3].lower())

	# Only need to output when using 1.8 or lower, the UI code handles it
	# otherwise
	if (int(bb.__version__.split(".")[0]) <= 1 and int(bb.__version__.split(".")[1]) <= 8):
		if msg:
			note(msg)

	if name.startswith("BuildStarted"):
		bb.data.setVar( 'BB_VERSION', bb.__version__, e.data )
		statusvars = ['BB_VERSION', 'METADATA_BRANCH', 'METADATA_REVISION', 'TARGET_ARCH', 'TARGET_OS', 'MACHINE', 'DISTRO', 'DISTRO_VERSION','TARGET_FPU']
		statuslines = ["%-17s = \"%s\"" % (i, bb.data.getVar(i, e.data, 1) or '') for i in statusvars]
		statusmsg = "\nOE Build Configuration:\n%s\n" % '\n'.join(statuslines)
		print statusmsg

		needed_vars = [ "TARGET_ARCH", "TARGET_OS" ]
		pesteruser = []
		for v in needed_vars:
			val = bb.data.getVar(v, e.data, 1)
			if not val or val == 'INVALID':
				pesteruser.append(v)
		if pesteruser:
			bb.fatal('The following variable(s) were not set: %s\nPlease set them directly, or choose a MACHINE or DISTRO that sets them.' % ', '.join(pesteruser))

	#
	# Handle removing stamps for 'rebuild' task
	#
	if name.startswith("StampUpdate"):
		for (fn, task) in e.targets:
			#print "%s %s" % (task, fn)
			if task == "do_rebuild":
				dir = "%s.*" % e.stampPrefix[fn]
				bb.note("Removing stamps: " + dir)
				os.system('rm -f '+ dir)
				os.system('touch ' + e.stampPrefix[fn] + '.needclean')

        if name == "ConfigParsed":
                generate_git_config(e)

	if not data in e.__dict__:
		return

	log = data.getVar("EVENTLOG", e.data, 1)
	if log:
		logfile = file(log, "a")
		logfile.write("%s\n" % msg)
		logfile.close()
}

addtask configure after do_unpack do_patch
do_configure[dirs] = "${S} ${B}"
do_configure[deptask] = "do_populate_sysroot"
base_do_configure() {
	:
}

addtask compile after do_configure
do_compile[dirs] = "${S} ${B}"
base_do_compile() {
	if [ -e Makefile -o -e makefile ]; then
		oe_runmake || die "make failed"
	else
		oenote "nothing to compile"
	fi
}

addtask install after do_compile
do_install[dirs] = "${D} ${S} ${B}"
# Remove and re-create ${D} so that is it guaranteed to be empty
do_install[cleandirs] = "${D}"

base_do_install() {
	:
}

base_do_package() {
	:
}

addtask build after do_populate_sysroot
do_build = ""
do_build[func] = "1"

python () {
    import exceptions

    source_mirror_fetch = bb.data.getVar('SOURCE_MIRROR_FETCH', d, 0)
    if not source_mirror_fetch:
        need_host = bb.data.getVar('COMPATIBLE_HOST', d, 1)
        if need_host:
            import re
            this_host = bb.data.getVar('HOST_SYS', d, 1)
            if not re.match(need_host, this_host):
                raise bb.parse.SkipPackage("incompatible with host %s" % this_host)

        need_machine = bb.data.getVar('COMPATIBLE_MACHINE', d, 1)
        if need_machine:
            import re
            this_machine = bb.data.getVar('MACHINE', d, 1)
            if this_machine and not re.match(need_machine, this_machine):
                raise bb.parse.SkipPackage("incompatible with machine %s" % this_machine)

    pn = bb.data.getVar('PN', d, 1)

    # OBSOLETE in bitbake 1.7.4
    srcdate = bb.data.getVar('SRCDATE_%s' % pn, d, 1)
    if srcdate != None:
        bb.data.setVar('SRCDATE', srcdate, d)

    use_nls = bb.data.getVar('USE_NLS_%s' % pn, d, 1)
    if use_nls != None:
        bb.data.setVar('USE_NLS', use_nls, d)

    # Git packages should DEPEND on git-native
    srcuri = bb.data.getVar('SRC_URI', d, 1)
    if "git://" in srcuri:
        depends = bb.data.getVarFlag('do_fetch', 'depends', d) or ""
        depends = depends + " git-native:do_populate_sysroot"
        bb.data.setVarFlag('do_fetch', 'depends', depends, d)

    # Mercurial packages should DEPEND on mercurial-native
    elif "hg://" in srcuri:
        depends = bb.data.getVarFlag('do_fetch', 'depends', d) or ""
        depends = depends + " mercurial-native:do_populate_sysroot"
        bb.data.setVarFlag('do_fetch', 'depends', depends, d)

    # OSC packages should DEPEND on osc-native
    elif "osc://" in srcuri:
        depends = bb.data.getVarFlag('do_fetch', 'depends', d) or ""
        depends = depends + " osc-native:do_populate_sysroot"
        bb.data.setVarFlag('do_fetch', 'depends', depends, d)

    # bb.utils.sha256_file() will fail if hashlib isn't present, so we fallback
    # on shasum-native.  We need to ensure that it is staged before we fetch.
    if bb.data.getVar('PN', d, True) != "shasum-native":
        try:
            import hashlib
        except ImportError:
            depends = bb.data.getVarFlag('do_fetch', 'depends', d) or ""
            depends = depends + " shasum-native:do_populate_sysroot"
            bb.data.setVarFlag('do_fetch', 'depends', depends, d)

    # 'multimachine' handling
    mach_arch = bb.data.getVar('MACHINE_ARCH', d, 1)
    pkg_arch = bb.data.getVar('PACKAGE_ARCH', d, 1)

    if (pkg_arch == mach_arch):
        # Already machine specific - nothing further to do
        return

    #
    # We always try to scan SRC_URI for urls with machine overrides
    # unless the package sets SRC_URI_OVERRIDES_PACKAGE_ARCH=0
    #
    override = bb.data.getVar('SRC_URI_OVERRIDES_PACKAGE_ARCH', d, 1)
    if override != '0':
        paths = []
        for p in [ "${PF}", "${P}", "${PN}", "files", "" ]:
            path = bb.data.expand(os.path.join("${FILE_DIRNAME}", p, "${MACHINE}"), d)
            if os.path.isdir(path):
                paths.append(path)
        if len(paths) != 0:
            for s in srcuri.split():
                if not s.startswith("file://"):
                    continue
                local = bb.data.expand(bb.fetch.localpath(s, d), d)
                for mp in paths:
                    if local.startswith(mp):
                        #bb.note("overriding PACKAGE_ARCH from %s to %s" % (pkg_arch, mach_arch))
                        bb.data.setVar('PACKAGE_ARCH', "${MACHINE_ARCH}", d)
                        bb.data.setVar('MULTIMACH_ARCH', mach_arch, d)
                        return

    multiarch = pkg_arch

    packages = bb.data.getVar('PACKAGES', d, 1).split()
    for pkg in packages:
        pkgarch = bb.data.getVar("PACKAGE_ARCH_%s" % pkg, d, 1)

        # We could look for != PACKAGE_ARCH here but how to choose
        # if multiple differences are present?
        # Look through PACKAGE_ARCHS for the priority order?
        if pkgarch and pkgarch == mach_arch:
            multiarch = mach_arch
            break

    bb.data.setVar('MULTIMACH_ARCH', multiarch, d)
}

def check_app_exists(app, d):
	from bb import which, data

	app = data.expand(app, d)
	path = data.getVar('PATH', d, 1)
	return len(which(path, app)) != 0

def check_gcc3(data):

	gcc3_versions = 'gcc-3.4.6 gcc-3.4.7 gcc-3.4 gcc34 gcc-3.4.4 gcc-3.3 gcc33 gcc-3.3.6 gcc-3.2 gcc32'

	for gcc3 in gcc3_versions.split():
		if check_app_exists(gcc3, data):
			return gcc3
	
	return False

EXPORT_FUNCTIONS do_setscene do_fetch do_unpack do_configure do_compile do_install do_package