Poky images with QEMU
=====================

Poky can generate qemu bootable kernels and images with can be used 
on a desktop system. Both arm and x86 images can currently be booted.
There are two scripts, runqemu and poky-qemu, one for use within poky, 
the other externally.

QEMU outside Poky (poky-qemu)
=============================

The poky-qemu script is run as: 

   MACHINE=<machine> poky-qemu <zimage> <filesystem>

where:

   <zimage> is the path to a kernel (e.g. zimage-qemuarm.bin)
   <filesystem> is the path to an ext2 image (e.g. filesystem-qemuarm.ext2)
   <machine> is "qemuarm" or "qemux86"
   
The MACHINE=<machine> prefix is optional and without it the script will try 
to detect the machine name from the name of the <zimage> file.

If <filesystem> isn't specified, nfs booting will be assumed.


QEMU within Poky (runqemu)
==========================

The runqemu script is run as: 

   runqemu <target> <type> <zimage> <filesystem>

where:

   <target> is "qemuarm","qemux86","nokia800","spitz" or "akita"
   <type> is "ext2", "nfs", "ext3" or "jffs2". (not all machines support all options)
   <zimage> is the path to a kernel (e.g. zimage-qemuarm.bin)
   <filesystem> is the path to the image (e.g. filesystem-qemuarm.ext2)

It will default to the qemuarm, ext2 and the last kernel and poky-image-sdk 
image built by poky.


Notes
=====

 - The scripts run qemu using sudo. Change perms on /dev/net/tun to 
   run as non root
 - You can access the host computer at 192.168.7.1 within the image.
 - Your qemu system will be accessible as 192.16.7.2.
 - The default NFS mount points are /srv/nfs/qemux86 or /srv/nfs/qemuarm 
   depending on the target type.
 - Images built for qemux86/qemuarm contain NFS server which export whole
   rootfs (/) in read/write mode.
 - You can set QEMU_MEMORY to control amount of available memory (default 64M).
 - You can set SERIAL_LOGFILE to have the serial output from the image logged 
   to a file.


NFS Image Notes
===============

As root;

% apt-get install nfs-kernel-server

% mkdir /srv/nfs/qemuarm

Edit via /etc/exports :

# /etc/exports: the access control list for filesystems which may be exported
#               to NFS clients.  See exports(5).
/srv/nfs/qemuarm 192.168.7.2(rw,no_root_squash)

% /etc/init.d/nfs-kernel-server restart

% modprobe tun

untar build/tmp/deploy/images/<built image>.rootfs.tar.bz2 into /srv/nfs/qemuarm

Finally, launch:

% runqemu <target> nfs

(Substitute qemux86 for qemuarm when using qemux86)


                                         Copyright (C) 2006-2008 OpenedHand Ltd.