diff options
Diffstat (limited to 'thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Utilities/STM32_EVAL/STM32L152_EVAL/stm32l152_eval.h')
| -rw-r--r-- | thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Utilities/STM32_EVAL/STM32L152_EVAL/stm32l152_eval.h | 457 |
1 files changed, 457 insertions, 0 deletions
diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Utilities/STM32_EVAL/STM32L152_EVAL/stm32l152_eval.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Utilities/STM32_EVAL/STM32L152_EVAL/stm32l152_eval.h new file mode 100644 index 0000000..9bdef11 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Utilities/STM32_EVAL/STM32L152_EVAL/stm32l152_eval.h @@ -0,0 +1,457 @@ +/** + ****************************************************************************** + * @file stm32l152_eval.h + * @author MCD Application Team + * @version V5.0.2 + * @date 09-March-2012 + * @brief This file contains definitions for STM32L152_EVAL's Leds, push-buttons + * and COM ports hardware resources. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32L152_EVAL_H +#define __STM32L152_EVAL_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx.h" +#include "stm32_eval_legacy.h" + +/** @addtogroup Utilities + * @{ + */ + +/** @addtogroup STM32_EVAL + * @{ + */ + +/** @addtogroup STM32L152_EVAL + * @{ + */ + +/** @addtogroup STM32L152_EVAL_LOW_LEVEL + * @{ + */ + +/** @defgroup STM32L152_EVAL_LOW_LEVEL_Exported_Types + * @{ + */ +typedef enum +{ + LED1 = 0, + LED2 = 1, + LED3 = 2, + LED4 = 3 +} Led_TypeDef; + +typedef enum +{ + BUTTON_KEY = 0, + BUTTON_RIGHT = 1, + BUTTON_LEFT = 2, + BUTTON_UP = 3, + BUTTON_DOWN = 4, + BUTTON_SEL = 5 +} Button_TypeDef; + +typedef enum +{ + BUTTON_MODE_GPIO = 0, + BUTTON_MODE_EXTI = 1 +} ButtonMode_TypeDef; + +typedef enum +{ + JOY_NONE = 0, + JOY_SEL = 1, + JOY_DOWN = 2, + JOY_LEFT = 3, + JOY_RIGHT = 4, + JOY_UP = 5 +} JOYState_TypeDef +; + +typedef enum +{ + COM1 = 0, + COM2 = 1 +} COM_TypeDef; +/** + * @} + */ + +/** @defgroup STM32L152_EVAL_LOW_LEVEL_Exported_Constants + * @{ + */ + +/** + * @brief Define for STM32L152_EVAL board + */ +#if !defined (USE_STM32L152_EVAL) + #define USE_STM32L152_EVAL +#endif + +/** @addtogroup STM32L152_EVAL_LOW_LEVEL_LED + * @{ + */ +#define LEDn 4 + +#define LED1_PIN GPIO_Pin_0 +#define LED1_GPIO_PORT GPIOD +#define LED1_GPIO_CLK RCC_AHBPeriph_GPIOD + +#define LED2_PIN GPIO_Pin_1 +#define LED2_GPIO_PORT GPIOD +#define LED2_GPIO_CLK RCC_AHBPeriph_GPIOD + +#define LED3_PIN GPIO_Pin_4 +#define LED3_GPIO_PORT GPIOD +#define LED3_GPIO_CLK RCC_AHBPeriph_GPIOD + +#define LED4_PIN GPIO_Pin_5 +#define LED4_GPIO_PORT GPIOD +#define LED4_GPIO_CLK RCC_AHBPeriph_GPIOD + +/** + * @} + */ + +/** @addtogroup STM32L152_EVAL_LOW_LEVEL_BUTTON + * @{ + */ +#define BUTTONn 6 +/* On STM32L152-EVAL board, the KEY button is connected to PA.00 and it can + be use as Wakeup pin button. */ + +/** + * @brief Key push-button + */ +#define KEY_BUTTON_PIN GPIO_Pin_0 +#define KEY_BUTTON_GPIO_PORT GPIOA +#define KEY_BUTTON_GPIO_CLK RCC_AHBPeriph_GPIOA +#define KEY_BUTTON_EXTI_LINE EXTI_Line0 +#define KEY_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOA +#define KEY_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource0 +#define KEY_BUTTON_EXTI_IRQn EXTI0_IRQn + +/** + * @brief Joystick Right push-button + */ +#define RIGHT_BUTTON_PIN GPIO_Pin_11 +#define RIGHT_BUTTON_GPIO_PORT GPIOE +#define RIGHT_BUTTON_GPIO_CLK RCC_AHBPeriph_GPIOE +#define RIGHT_BUTTON_EXTI_LINE EXTI_Line11 +#define RIGHT_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOE +#define RIGHT_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource11 +#define RIGHT_BUTTON_EXTI_IRQn EXTI15_10_IRQn + +/** + * @brief Joystick Left push-button + */ +#define LEFT_BUTTON_PIN GPIO_Pin_12 +#define LEFT_BUTTON_GPIO_PORT GPIOE +#define LEFT_BUTTON_GPIO_CLK RCC_AHBPeriph_GPIOE +#define LEFT_BUTTON_EXTI_LINE EXTI_Line12 +#define LEFT_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOE +#define LEFT_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource12 +#define LEFT_BUTTON_EXTI_IRQn EXTI15_10_IRQn + +/** + * @brief Joystick Up push-button + */ +#define UP_BUTTON_PIN GPIO_Pin_9 +#define UP_BUTTON_GPIO_PORT GPIOE +#define UP_BUTTON_GPIO_CLK RCC_AHBPeriph_GPIOE +#define UP_BUTTON_EXTI_LINE EXTI_Line9 +#define UP_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOE +#define UP_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource9 +#define UP_BUTTON_EXTI_IRQn EXTI9_5_IRQn + +/** + * @brief Joystick Down push-button + */ +#define DOWN_BUTTON_PIN GPIO_Pin_10 +#define DOWN_BUTTON_GPIO_PORT GPIOE +#define DOWN_BUTTON_GPIO_CLK RCC_AHBPeriph_GPIOE +#define DOWN_BUTTON_EXTI_LINE EXTI_Line10 +#define DOWN_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOE +#define DOWN_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource10 +#define DOWN_BUTTON_EXTI_IRQn EXTI15_10_IRQn + +/** + * @brief Joystick Sel push-button + */ +#define SEL_BUTTON_PIN GPIO_Pin_8 +#define SEL_BUTTON_GPIO_PORT GPIOE +#define SEL_BUTTON_GPIO_CLK RCC_AHBPeriph_GPIOE +#define SEL_BUTTON_EXTI_LINE EXTI_Line8 +#define SEL_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOE +#define SEL_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource8 +#define SEL_BUTTON_EXTI_IRQn EXTI9_5_IRQn + +/** + * @} + */ + +/** @addtogroup STM32L152_EVAL_LOW_LEVEL_COM + * @{ + */ +#define COMn 2 + +/** + * @brief Definition for COM port1, connected to USART2 + */ +#define EVAL_COM1 USART2 +#define EVAL_COM1_CLK RCC_APB1Periph_USART2 + +#define EVAL_COM1_TX_PIN GPIO_Pin_5 +#define EVAL_COM1_TX_GPIO_PORT GPIOD +#define EVAL_COM1_TX_GPIO_CLK RCC_AHBPeriph_GPIOD +#define EVAL_COM1_TX_SOURCE GPIO_PinSource5 +#define EVAL_COM1_TX_AF GPIO_AF_USART2 + +#define EVAL_COM1_RX_PIN GPIO_Pin_6 +#define EVAL_COM1_RX_GPIO_PORT GPIOD +#define EVAL_COM1_RX_GPIO_CLK RCC_AHBPeriph_GPIOD +#define EVAL_COM1_RX_SOURCE GPIO_PinSource6 +#define EVAL_COM1_RX_AF GPIO_AF_USART2 + +#define EVAL_COM1_RTS_PIN GPIO_Pin_4 +#define EVAL_COM1_RTS_GPIO_PORT GPIOD +#define EVAL_COM1_RTS_GPIO_CLK RCC_AHBPeriph_GPIOD +#define EVAL_COM1_RTS_SOURCE GPIO_PinSource4 +#define EVAL_COM1_RTS_AF GPIO_AF_USART2 + +#define EVAL_COM1_CTS_PIN GPIO_Pin_3 +#define EVAL_COM1_CTS_GPIO_PORT GPIOD +#define EVAL_COM1_CTS_GPIO_CLK RCC_AHBPeriph_GPIOD +#define EVAL_COM1_CTS_SOURCE GPIO_PinSource3 +#define EVAL_COM1_CTS_AF GPIO_AF_USART2 + +#define EVAL_COM1_IRQn USART2_IRQn + +/** + * @brief Definition for COM port2, connected to USART3 + */ +#define EVAL_COM2 USART3 +#define EVAL_COM2_CLK RCC_APB1Periph_USART3 + +#define EVAL_COM2_TX_PIN GPIO_Pin_10 +#define EVAL_COM2_TX_GPIO_PORT GPIOC +#define EVAL_COM2_TX_GPIO_CLK RCC_AHBPeriph_GPIOC +#define EVAL_COM2_TX_SOURCE GPIO_PinSource10 +#define EVAL_COM2_TX_AF GPIO_AF_USART3 + +#define EVAL_COM2_RX_PIN GPIO_Pin_11 +#define EVAL_COM2_RX_GPIO_PORT GPIOC +#define EVAL_COM2_RX_GPIO_CLK RCC_AHBPeriph_GPIOC +#define EVAL_COM2_RX_SOURCE GPIO_PinSource11 +#define EVAL_COM2_RX_AF GPIO_AF_USART3 + +#define EVAL_COM2_IRQn USART3_IRQn + +/** + * @} + */ + +/** @addtogroup STM32L152_EVAL_LOW_LEVEL_SD_FLASH + * @{ + */ +/** + * @brief SD Card SPI Interface + */ +#define SD_SPI SPI2 +#define SD_SPI_CLK RCC_APB1Periph_SPI2 +#define SD_SPI_SCK_PIN GPIO_Pin_13 /* PB.13 */ +#define SD_SPI_SCK_GPIO_PORT GPIOB /* GPIOB */ +#define SD_SPI_SCK_GPIO_CLK RCC_AHBPeriph_GPIOB +#define SD_SPI_SCK_SOURCE GPIO_PinSource13 +#define SD_SPI_SCK_AF GPIO_AF_SPI2 +#define SD_SPI_MISO_PIN GPIO_Pin_14 /* PB.14 */ +#define SD_SPI_MISO_GPIO_PORT GPIOB /* GPIOB */ +#define SD_SPI_MISO_GPIO_CLK RCC_AHBPeriph_GPIOB +#define SD_SPI_MISO_SOURCE GPIO_PinSource14 +#define SD_SPI_MISO_AF GPIO_AF_SPI2 +#define SD_SPI_MOSI_PIN GPIO_Pin_15 /* PB.15 */ +#define SD_SPI_MOSI_GPIO_PORT GPIOB /* GPIOB */ +#define SD_SPI_MOSI_GPIO_CLK RCC_AHBPeriph_GPIOB +#define SD_SPI_MOSI_SOURCE GPIO_PinSource15 +#define SD_SPI_MOSI_AF GPIO_AF_SPI2 +#define SD_CS_PIN GPIO_Pin_7 /* PD.07 */ +#define SD_CS_GPIO_PORT GPIOD /* GPIOD */ +#define SD_CS_GPIO_CLK RCC_AHBPeriph_GPIOD +#define SD_DETECT_PIN GPIO_Pin_6 /* PE.06 */ +#define SD_DETECT_EXTI_LINE EXTI_Line6 +#define SD_DETECT_EXTI_PIN_SOURCE EXTI_PinSource6 + +#define SD_DETECT_GPIO_PORT GPIOE /* GPIOE */ +#define SD_DETECT_GPIO_CLK RCC_AHBPeriph_GPIOE +#define SD_DETECT_EXTI_PORT_SOURCE EXTI_PortSourceGPIOE +#define SD_DETECT_EXTI_IRQn EXTI9_5_IRQn +/** + * @} + */ + +/** @addtogroup STM32L152_EVAL_LOW_LEVEL_TSENSOR_I2C + * @{ + */ +/** + * @brief LM75 Temperature Sensor I2C Interface pins + */ +#define LM75_I2C I2C1 +#define LM75_I2C_CLK RCC_APB1Periph_I2C1 +#define LM75_I2C_SCL_PIN GPIO_Pin_6 /* PB.06 */ +#define LM75_I2C_SCL_GPIO_PORT GPIOB /* GPIOB */ +#define LM75_I2C_SCL_GPIO_CLK RCC_AHBPeriph_GPIOB +#define LM75_I2C_SCL_SOURCE GPIO_PinSource6 +#define LM75_I2C_SCL_AF GPIO_AF_I2C1 +#define LM75_I2C_SDA_PIN GPIO_Pin_7 /* PB.07 */ +#define LM75_I2C_SDA_GPIO_PORT GPIOB /* GPIOB */ +#define LM75_I2C_SDA_GPIO_CLK RCC_AHBPeriph_GPIOB +#define LM75_I2C_SDA_SOURCE GPIO_PinSource7 +#define LM75_I2C_SDA_AF GPIO_AF_I2C1 +#define LM75_I2C_SMBUSALERT_PIN GPIO_Pin_5 /* PB.05 */ +#define LM75_I2C_SMBUSALERT_GPIO_PORT GPIOB /* GPIOB */ +#define LM75_I2C_SMBUSALERT_GPIO_CLK RCC_AHBPeriph_GPIOB +#define LM75_I2C_SMBUSALERT_SOURCE GPIO_PinSource5 +#define LM75_I2C_SMBUSALERT_AF GPIO_AF_I2C1 +#define LM75_I2C_DR ((uint32_t)0x40005410) + +#define LM75_DMA_CLK RCC_AHBPeriph_DMA1 +#define LM75_DMA_TX_CHANNEL DMA1_Channel6 +#define LM75_DMA_RX_CHANNEL DMA1_Channel7 +#define LM75_DMA_TX_TCFLAG DMA1_FLAG_TC6 +#define LM75_DMA_RX_TCFLAG DMA1_FLAG_TC7 + +/** + * @} + */ + +/** @addtogroup STM32L152_EVAL_LOW_LEVEL_I2C_EE + * @{ + */ +/** + * @brief I2C EEPROM Interface pins + */ + +#define sEE_I2C I2C1 +#define sEE_I2C_CLK RCC_APB1Periph_I2C1 +#define sEE_I2C_SCL_PIN GPIO_Pin_6 /* PB.06 */ +#define sEE_I2C_SCL_GPIO_PORT GPIOB /* GPIOB */ +#define sEE_I2C_SCL_GPIO_CLK RCC_AHBPeriph_GPIOB +#define sEE_I2C_SCL_SOURCE GPIO_PinSource6 +#define sEE_I2C_SCL_AF GPIO_AF_I2C1 +#define sEE_I2C_SDA_PIN GPIO_Pin_7 /* PB.07 */ +#define sEE_I2C_SDA_GPIO_PORT GPIOB /* GPIOB */ +#define sEE_I2C_SDA_GPIO_CLK RCC_AHBPeriph_GPIOB +#define sEE_I2C_SDA_SOURCE GPIO_PinSource7 +#define sEE_I2C_SDA_AF GPIO_AF_I2C1 +#define sEE_M24C64_32 + +#define sEE_I2C_DMA DMA1 +#define sEE_I2C_DMA_CHANNEL_TX DMA1_Channel6 +#define sEE_I2C_DMA_CHANNEL_RX DMA1_Channel7 +#define sEE_I2C_DMA_FLAG_TX_TC DMA1_IT_TC6 +#define sEE_I2C_DMA_FLAG_TX_GL DMA1_IT_GL6 +#define sEE_I2C_DMA_FLAG_RX_TC DMA1_IT_TC7 +#define sEE_I2C_DMA_FLAG_RX_GL DMA1_IT_GL7 +#define sEE_I2C_DMA_CLK RCC_AHBPeriph_DMA1 +#define sEE_I2C_DR_Address ((uint32_t)0x40005410) +#define sEE_USE_DMA + +#define sEE_I2C_DMA_TX_IRQn DMA1_Channel6_IRQn +#define sEE_I2C_DMA_RX_IRQn DMA1_Channel7_IRQn +#define sEE_I2C_DMA_TX_IRQHandler DMA1_Channel6_IRQHandler +#define sEE_I2C_DMA_RX_IRQHandler DMA1_Channel7_IRQHandler +#define sEE_I2C_DMA_PREPRIO 0 +#define sEE_I2C_DMA_SUBPRIO 0 + +#define sEE_DIRECTION_TX 0 +#define sEE_DIRECTION_RX 1 + +/* Time constant for the delay caclulation allowing to have a millisecond + incrementing counter. This value should be equal to (System Clock / 1000). + ie. if system clock = 32MHz then sEE_TIME_CONST should be 32. */ +#define sEE_TIME_CONST 32 + +/** + * @} + */ + +/** + * @} + */ + +/** @defgroup STM32L152_EVAL_LOW_LEVEL_Exported_Macros + * @{ + */ +/** + * @} + */ + + +/** @defgroup STM32L152_EVAL_LOW_LEVEL_Exported_Functions + * @{ + */ +void STM_EVAL_LEDInit(Led_TypeDef Led); +void STM_EVAL_LEDOn(Led_TypeDef Led); +void STM_EVAL_LEDOff(Led_TypeDef Led); +void STM_EVAL_LEDToggle(Led_TypeDef Led); +void STM_EVAL_PBInit(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode); +uint32_t STM_EVAL_PBGetState(Button_TypeDef Button); +void STM_EVAL_COMInit(COM_TypeDef COM, USART_InitTypeDef* USART_InitStruct); +void SD_LowLevel_DeInit(void); +void SD_LowLevel_Init(void); +void LM75_LowLevel_DeInit(void); +void LM75_LowLevel_Init(void); +void sEE_LowLevel_DeInit(void); +void sEE_LowLevel_Init(void); +void sEE_LowLevel_DMAConfig(uint32_t pBuffer, uint32_t BufferSize, uint32_t Direction); + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32L152_EVAL_H */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |