diff options
Diffstat (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/readme.txt')
| -rw-r--r-- | tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/readme.txt | 98 |
1 files changed, 0 insertions, 98 deletions
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/readme.txt deleted file mode 100644 index b0e70e0..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/RegSimul_DualMode/readme.txt +++ /dev/null @@ -1,98 +0,0 @@ -/** - @page ADC_RegSimul_DualMode ADC regular simultaneous dual mode example - - @verbatim - ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* - * @file ADC/RegSimul_DualMode/readme.txt - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Description of the ADC regular simultaneous dual mode example. - ****************************************************************************** - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - ****************************************************************************** - @endverbatim - -@par Example Description - -This example describes how to use ADC1 and ADC2 in regular simultaneous dual mode. -ADC1 is configured to convert channel14 and channel17 regular channels continuously. -ADC2 is configured to convert channel11 and channel12 regular channels continuously. -The connection between internal Vref and channel17 is enabled for ADC1. - -Once the regular channels conversion is started by software, channel14 is converted -on ADC1 and channel11 is converted on ADC2 on the same time. The 32bits conversion -result is then stored on ADC1 DR register. The DMA will transfer this data which -will be stored ADC_DualConvertedValueTab table. Consecutively to those conversion, -channel17 is converted on ADC1 and channel12 on ADC2. The combined conversion -result is also transferred by DMA to the same destination buffer. - -The same procedure is repeated until the specified number of data to be transferred -by DMA is reached. - -The ADCs clocks are set to 14 MHz. - -@par Directory contents - - - ADC/RegSimul_DualMode/stm32f10x_conf.h Library Configuration file - - ADC/RegSimul_DualMode/stm32f10x_it.c Interrupt handlers - - ADC/RegSimul_DualMode/stm32f10x_it.h Interrupt handlers header file - - ADC/RegSimul_DualMode/system_stm32f10x.c STM32F10x system source file - - ADC/RegSimul_DualMode/main.c Main program - -@par Hardware and Software environment - - - This example runs on STM32F10x Connectivity line, High-Density, Medium-Density, - XL-Density and Low-Density Devices. - - - This example has been tested with STMicroelectronics STM3210C-EVAL - (Connectivity line), STM3210E-EVAL (High-Density and XL-Density) and - STM3210B-EVAL (Medium-Density) evaluation boards and can be easily tailored - to any other supported device and development board. - - - STM3210C-EVAL Set-up - - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin - PC.04 (potentiometer RV1), ADC Channel11 mapped on pin PC.01 and ADC - Channel12 mapped on pin PC.02. - - - STM3210E-EVAL Set-up - - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin - PC.04 (potentiometer RV1), ADC Channel11 mapped on pin PC.01 and ADC - Channel12 mapped on pin PC.02. - - - STM3210B-EVAL Set-up - - Connect a known voltage, between 0-3.3V, to ADC Channel14 mapped on pin - PC.04 (potentiometer RV1), ADC Channel11 mapped on pin PC.01 and ADC - Channel12 mapped on pin PC.02. - -@par How to use it ? - -In order to make the program work, you must do the following : - - Copy all source files from this example folder to the template folder under - Project\STM32F10x_StdPeriph_Template - - Open your preferred toolchain - - Rebuild all files and load your image into target memory - - Run the example - -@note - - Low-density Value line devices are STM32F100xx microcontrollers where the - Flash memory density ranges between 16 and 32 Kbytes. - - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx - microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. - - Medium-density Value line devices are STM32F100xx microcontrollers where - the Flash memory density ranges between 64 and 128 Kbytes. - - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx - microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. - - High-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 512 and 1024 Kbytes. - - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. - - * <h3><center>© COPYRIGHT 2011 STMicroelectronics</center></h3> - */ |