From 40e04e3772726829d66c12e69f24b03920d79c67 Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Wed, 25 Jan 2017 22:24:18 +0100 Subject: o Moving tinyprintf and stm libraries under thirdparty. --- .../Templates/TrueSTUDIO/startup_stm32l1xx_mdp.s | 415 +++++++++++++++++++++ 1 file changed, 415 insertions(+) create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32L1xx/Source/Templates/TrueSTUDIO/startup_stm32l1xx_mdp.s (limited to 'thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32L1xx/Source/Templates/TrueSTUDIO/startup_stm32l1xx_mdp.s') diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32L1xx/Source/Templates/TrueSTUDIO/startup_stm32l1xx_mdp.s b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32L1xx/Source/Templates/TrueSTUDIO/startup_stm32l1xx_mdp.s new file mode 100644 index 0000000..cc8d06c --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/CMSIS/Device/ST/STM32L1xx/Source/Templates/TrueSTUDIO/startup_stm32l1xx_mdp.s @@ -0,0 +1,415 @@ +/** + ****************************************************************************** + * @file startup_stm32l1xx_mdp.s + * @author MCD Application Team + * @version V1.1.1 + * @date 09-March-2012 + * @brief STM32L1xx Ultra Low Power Medium-density Plus Devices vector table + * for Atollic toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Configure the clock system + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M3 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2012 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m3 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss + +.equ BootRAM, 0xF108F85F +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * + * @param None + * @retval : None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + .word WWDG_IRQHandler + .word PVD_IRQHandler + .word TAMPER_STAMP_IRQHandler + .word RTC_WKUP_IRQHandler + .word FLASH_IRQHandler + .word RCC_IRQHandler + .word EXTI0_IRQHandler + .word EXTI1_IRQHandler + .word EXTI2_IRQHandler + .word EXTI3_IRQHandler + .word EXTI4_IRQHandler + .word DMA1_Channel1_IRQHandler + .word DMA1_Channel2_IRQHandler + .word DMA1_Channel3_IRQHandler + .word DMA1_Channel4_IRQHandler + .word DMA1_Channel5_IRQHandler + .word DMA1_Channel6_IRQHandler + .word DMA1_Channel7_IRQHandler + .word ADC1_IRQHandler + .word USB_HP_IRQHandler + .word USB_LP_IRQHandler + .word DAC_IRQHandler + .word COMP_IRQHandler + .word EXTI9_5_IRQHandler + .word LCD_IRQHandler + .word TIM9_IRQHandler + .word TIM10_IRQHandler + .word TIM11_IRQHandler + .word TIM2_IRQHandler + .word TIM3_IRQHandler + .word TIM4_IRQHandler + .word I2C1_EV_IRQHandler + .word I2C1_ER_IRQHandler + .word I2C2_EV_IRQHandler + .word I2C2_ER_IRQHandler + .word SPI1_IRQHandler + .word SPI2_IRQHandler + .word USART1_IRQHandler + .word USART2_IRQHandler + .word USART3_IRQHandler + .word EXTI15_10_IRQHandler + .word RTC_Alarm_IRQHandler + .word USB_FS_WKUP_IRQHandler + .word TIM6_IRQHandler + .word TIM7_IRQHandler + .word 0 + .word TIM5_IRQHandler + .word SPI3_IRQHandler + .word 0 + .word 0 + .word DMA2_Channel1_IRQHandler + .word DMA2_Channel2_IRQHandler + .word DMA2_Channel3_IRQHandler + .word DMA2_Channel4_IRQHandler + .word DMA2_Channel5_IRQHandler + .word AES_IRQHandler + .word COMP_ACQ_IRQHandler + .word 0 + .word 0 + .word 0 + .word 0 + .word 0 + .word BootRAM /* @0x108. This is for boot in RAM mode for + STM32L15x ULtra Low Power Medium-density devices. */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMPER_STAMP_IRQHandler + .thumb_set TAMPER_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Channel1_IRQHandler + .thumb_set DMA1_Channel1_IRQHandler,Default_Handler + + .weak DMA1_Channel2_IRQHandler + .thumb_set DMA1_Channel2_IRQHandler,Default_Handler + + .weak DMA1_Channel3_IRQHandler + .thumb_set DMA1_Channel3_IRQHandler,Default_Handler + + .weak DMA1_Channel4_IRQHandler + .thumb_set DMA1_Channel4_IRQHandler,Default_Handler + + .weak DMA1_Channel5_IRQHandler + .thumb_set DMA1_Channel5_IRQHandler,Default_Handler + + .weak DMA1_Channel6_IRQHandler + .thumb_set DMA1_Channel6_IRQHandler,Default_Handler + + .weak DMA1_Channel7_IRQHandler + .thumb_set DMA1_Channel7_IRQHandler,Default_Handler + + .weak ADC1_IRQHandler + .thumb_set ADC1_IRQHandler,Default_Handler + + .weak USB_HP_IRQHandler + .thumb_set USB_HP_IRQHandler,Default_Handler + + .weak USB_LP_IRQHandler + .thumb_set USB_LP_IRQHandler,Default_Handler + + .weak DAC_IRQHandler + .thumb_set DAC_IRQHandler,Default_Handler + + .weak COMP_IRQHandler + .thumb_set COMP_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak LCD_IRQHandler + .thumb_set LCD_IRQHandler,Default_Handler + + .weak TIM9_IRQHandler + .thumb_set TIM9_IRQHandler,Default_Handler + + .weak TIM10_IRQHandler + .thumb_set TIM10_IRQHandler,Default_Handler + + .weak TIM11_IRQHandler + .thumb_set TIM11_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak USB_FS_WKUP_IRQHandler + .thumb_set USB_FS_WKUP_IRQHandler,Default_Handler + + .weak TIM6_IRQHandler + .thumb_set TIM6_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak DMA2_Channel1_IRQHandler + .thumb_set DMA2_Channel1_IRQHandler,Default_Handler + + .weak DMA2_Channel2_IRQHandler + .thumb_set DMA2_Channel2_IRQHandler,Default_Handler + + .weak DMA2_Channel3_IRQHandler + .thumb_set DMA2_Channel3_IRQHandler,Default_Handler + + .weak DMA2_Channel4_IRQHandler + .thumb_set DMA2_Channel4_IRQHandler,Default_Handler + + .weak DMA2_Channel5_IRQHandler + .thumb_set DMA2_Channel5_IRQHandler,Default_Handler + + .weak AES_IRQHandler + .thumb_set AES_IRQHandler,Default_Handler + + .weak COMP_ACQ_IRQHandler + .thumb_set COMP_ACQ_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + -- cgit v1.2.3