From 40e04e3772726829d66c12e69f24b03920d79c67 Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Wed, 25 Jan 2017 22:24:18 +0100 Subject: o Moving tinyprintf and stm libraries under thirdparty. --- .../STM32_USB-FS-Device_Driver/inc/usb_core.h | 259 +++++++++++++++++++++ 1 file changed, 259 insertions(+) create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32_USB-FS-Device_Driver/inc/usb_core.h (limited to 'thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32_USB-FS-Device_Driver/inc/usb_core.h') diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32_USB-FS-Device_Driver/inc/usb_core.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32_USB-FS-Device_Driver/inc/usb_core.h new file mode 100644 index 0000000..bf303f7 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Libraries/STM32_USB-FS-Device_Driver/inc/usb_core.h @@ -0,0 +1,259 @@ +/** + ****************************************************************************** + * @file usb_core.h + * @author MCD Application Team + * @version V4.0.0 + * @date 28-August-2012 + * @brief Standard protocol processing functions prototypes + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2012 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_CORE_H +#define __USB_CORE_H + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +typedef enum _CONTROL_STATE +{ + WAIT_SETUP, /* 0 */ + SETTING_UP, /* 1 */ + IN_DATA, /* 2 */ + OUT_DATA, /* 3 */ + LAST_IN_DATA, /* 4 */ + LAST_OUT_DATA, /* 5 */ + WAIT_STATUS_IN, /* 7 */ + WAIT_STATUS_OUT, /* 8 */ + STALLED, /* 9 */ + PAUSE /* 10 */ +} CONTROL_STATE; /* The state machine states of a control pipe */ + +typedef struct OneDescriptor +{ + uint8_t *Descriptor; + uint16_t Descriptor_Size; +} +ONE_DESCRIPTOR, *PONE_DESCRIPTOR; +/* All the request process routines return a value of this type + If the return value is not SUCCESS or NOT_READY, + the software will STALL the correspond endpoint */ +typedef enum _RESULT +{ + USB_SUCCESS = 0, /* Process successfully */ + USB_ERROR, + USB_UNSUPPORT, + USB_NOT_READY /* The process has not been finished, endpoint will be + NAK to further request */ +} RESULT; + + +/*-*-*-*-*-*-*-*-*-*-* Definitions for endpoint level -*-*-*-*-*-*-*-*-*-*-*-*/ +typedef struct _ENDPOINT_INFO +{ + /* When send data out of the device, + CopyData() is used to get data buffer 'Length' bytes data + if Length is 0, + CopyData() returns the total length of the data + if the request is not supported, returns 0 + (NEW Feature ) + if CopyData() returns -1, the calling routine should not proceed + further and will resume the SETUP process by the class device + if Length is not 0, + CopyData() returns a pointer to indicate the data location + Usb_wLength is the data remain to be sent, + Usb_wOffset is the Offset of original data + When receive data from the host, + CopyData() is used to get user data buffer which is capable + of Length bytes data to copy data from the endpoint buffer. + if Length is 0, + CopyData() returns the available data length, + if Length is not 0, + CopyData() returns user buffer address + Usb_rLength is the data remain to be received, + Usb_rPointer is the Offset of data buffer + */ + uint16_t Usb_wLength; + uint16_t Usb_wOffset; + uint16_t PacketSize; + uint8_t *(*CopyData)(uint16_t Length); +}ENDPOINT_INFO; + +/*-*-*-*-*-*-*-*-*-*-*-* Definitions for device level -*-*-*-*-*-*-*-*-*-*-*-*/ + +typedef struct _DEVICE +{ + uint8_t Total_Endpoint; /* Number of endpoints that are used */ + uint8_t Total_Configuration;/* Number of configuration available */ +} +DEVICE; + +typedef union +{ + uint16_t w; + struct BW + { + uint8_t bb1; + uint8_t bb0; + } + bw; +} uint16_t_uint8_t; + +typedef struct _DEVICE_INFO +{ + uint8_t USBbmRequestType; /* bmRequestType */ + uint8_t USBbRequest; /* bRequest */ + uint16_t_uint8_t USBwValues; /* wValue */ + uint16_t_uint8_t USBwIndexs; /* wIndex */ + uint16_t_uint8_t USBwLengths; /* wLength */ + + uint8_t ControlState; /* of type CONTROL_STATE */ + uint8_t Current_Feature; + uint8_t Current_Configuration; /* Selected configuration */ + uint8_t Current_Interface; /* Selected interface of current configuration */ + uint8_t Current_AlternateSetting;/* Selected Alternate Setting of current + interface*/ + + ENDPOINT_INFO Ctrl_Info; +}DEVICE_INFO; + +typedef struct _DEVICE_PROP +{ + void (*Init)(void); /* Initialize the device */ + void (*Reset)(void); /* Reset routine of this device */ + + /* Device dependent process after the status stage */ + void (*Process_Status_IN)(void); + void (*Process_Status_OUT)(void); + + /* Procedure of process on setup stage of a class specified request with data stage */ + /* All class specified requests with data stage are processed in Class_Data_Setup + Class_Data_Setup() + responses to check all special requests and fills ENDPOINT_INFO + according to the request + If IN tokens are expected, then wLength & wOffset will be filled + with the total transferring bytes and the starting position + If OUT tokens are expected, then rLength & rOffset will be filled + with the total expected bytes and the starting position in the buffer + + If the request is valid, Class_Data_Setup returns SUCCESS, else UNSUPPORT + + CAUTION: + Since GET_CONFIGURATION & GET_INTERFACE are highly related to + the individual classes, they will be checked and processed here. + */ + RESULT (*Class_Data_Setup)(uint8_t RequestNo); + + /* Procedure of process on setup stage of a class specified request without data stage */ + /* All class specified requests without data stage are processed in Class_NoData_Setup + Class_NoData_Setup + responses to check all special requests and perform the request + + CAUTION: + Since SET_CONFIGURATION & SET_INTERFACE are highly related to + the individual classes, they will be checked and processed here. + */ + RESULT (*Class_NoData_Setup)(uint8_t RequestNo); + + /*Class_Get_Interface_Setting + This function is used by the file usb_core.c to test if the selected Interface + and Alternate Setting (uint8_t Interface, uint8_t AlternateSetting) are supported by + the application. + This function is writing by user. It should return "SUCCESS" if the Interface + and Alternate Setting are supported by the application or "UNSUPPORT" if they + are not supported. */ + + RESULT (*Class_Get_Interface_Setting)(uint8_t Interface, uint8_t AlternateSetting); + + uint8_t* (*GetDeviceDescriptor)(uint16_t Length); + uint8_t* (*GetConfigDescriptor)(uint16_t Length); + uint8_t* (*GetStringDescriptor)(uint16_t Length); + + /* This field is not used in current library version. It is kept only for + compatibility with previous versions */ + void* RxEP_buffer; + + uint8_t MaxPacketSize; + +}DEVICE_PROP; + +typedef struct _USER_STANDARD_REQUESTS +{ + void (*User_GetConfiguration)(void); /* Get Configuration */ + void (*User_SetConfiguration)(void); /* Set Configuration */ + void (*User_GetInterface)(void); /* Get Interface */ + void (*User_SetInterface)(void); /* Set Interface */ + void (*User_GetStatus)(void); /* Get Status */ + void (*User_ClearFeature)(void); /* Clear Feature */ + void (*User_SetEndPointFeature)(void); /* Set Endpoint Feature */ + void (*User_SetDeviceFeature)(void); /* Set Device Feature */ + void (*User_SetDeviceAddress)(void); /* Set Device Address */ +} +USER_STANDARD_REQUESTS; + +/* Exported constants --------------------------------------------------------*/ +#define Type_Recipient (pInformation->USBbmRequestType & (REQUEST_TYPE | RECIPIENT)) + +#define Usb_rLength Usb_wLength +#define Usb_rOffset Usb_wOffset + +#define USBwValue USBwValues.w +#define USBwValue0 USBwValues.bw.bb0 +#define USBwValue1 USBwValues.bw.bb1 +#define USBwIndex USBwIndexs.w +#define USBwIndex0 USBwIndexs.bw.bb0 +#define USBwIndex1 USBwIndexs.bw.bb1 +#define USBwLength USBwLengths.w +#define USBwLength0 USBwLengths.bw.bb0 +#define USBwLength1 USBwLengths.bw.bb1 + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +uint8_t Setup0_Process(void); +uint8_t Post0_Process(void); +uint8_t Out0_Process(void); +uint8_t In0_Process(void); + +RESULT Standard_SetEndPointFeature(void); +RESULT Standard_SetDeviceFeature(void); + +uint8_t *Standard_GetConfiguration(uint16_t Length); +RESULT Standard_SetConfiguration(void); +uint8_t *Standard_GetInterface(uint16_t Length); +RESULT Standard_SetInterface(void); +uint8_t *Standard_GetDescriptorData(uint16_t Length, PONE_DESCRIPTOR pDesc); + +uint8_t *Standard_GetStatus(uint16_t Length); +RESULT Standard_ClearFeature(void); +void SetDeviceAddress(uint8_t); +void NOP_Process(void); + +extern DEVICE_PROP Device_Property; +extern USER_STANDARD_REQUESTS User_Standard_Requests; +extern DEVICE Device_Table; +extern DEVICE_INFO Device_Info; + +/* cells saving status during interrupt servicing */ +extern __IO uint16_t SaveRState; +extern __IO uint16_t SaveTState; + +#endif /* __USB_CORE_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3