From 40e04e3772726829d66c12e69f24b03920d79c67 Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Wed, 25 Jan 2017 22:24:18 +0100 Subject: o Moving tinyprintf and stm libraries under thirdparty. --- .../Projects/Audio_Speaker/readme.txt | 148 +++++++++++++++++++++ 1 file changed, 148 insertions(+) create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/readme.txt (limited to 'thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/readme.txt') diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/readme.txt b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/readme.txt new file mode 100644 index 0000000..044f814 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/readme.txt @@ -0,0 +1,148 @@ +/** + ****************************************************************************** + * @file readme.txt + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Description of the USB Audio_Speaker Demo. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +Example description +=================== +The USB-FS-Device Audio Speaker demo gives examples of how to use the STM32F10xxx +and STM32L15xxx USB-FS-Device peripheral to communicate with the PC host in the +isochronous transfer mode. +It provides a demonstration of the correct method for configuring an isochronous +endpoint, receiving or transmitting data from/to the host. + +More details about this Demo implementation is given in the User manual +"UM0424 STM32F10xxx USB development kit", available for download from the ST +microcontrollers website: www.st.com/stm32 + + +Directory contents +================== + + \inc: contains the Demo firmware header files + + \EWARM: contains preconfigured projects for EWARM toolchain + + \RIDE: contains preconfigured projects for RIDE toolchain + + \MDK-ARM: contains preconfigured projects for MDK-ARM toolchain + + \TASKING: contains preconfigured projects for TASKING toolchain + + \TrueSTUDIO: contains preconfigured projects for TrueSTUDIO toolchain + + \src: contains the Demo firmware source files + +Hardware environment +==================== +This example runs on STMicroelectronics STM3210B-EVAL, STM3210E-EVAL and +STM32L152-EVAL evaluation boards and can be easily tailored to any other hardware. +To select the STMicroelectronics evaluation board used to run the example, uncomment +the corresponding line in platform_config.h file. + + - STM3210B-EVAL Set-up + - Jumper JP1 (USB disconnect) should be connected in position 2-3. + - Jumper JP6 should be not connected. + + - STM3210E-EVAL Set-up + - Jumper JP14 (USB disconnect) should be connected in position 2-3. + - Jumper JP18 (MCKI) should be connected in position 2-3. + + - STM32L152-EVAL Set-up + - Jumper JP16 (Audio Out) should be not connected. + + +How to use it +============= + + EWARM + - Open the AudioSpeaker.eww workspace. + - In the workspace toolbar select the project config: + - STM3210B-EVAL: to configure the project for STM32 Medium-density devices + - STM3210E-EVAL: to configure the project for STM32 High-density devices + - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices + - STM32L152-EVAL: to configure the project for STM32 Medium-Density Low-Power devices + - Rebuild all files: Project->Rebuild all + - Load project image: Project->Debug + - Run program: Debug->Go(F5) + + + MDK-ARM + - Open the AudioSpeaker.Uv2 project + - In the build toolbar select the project config: + - STM3210B-EVAL: to configure the project for STM32 Medium-density devices + - STM3210E-EVAL: to configure the project for STM32 High-density devices + - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices + - STM32L152-EVAL: to configure the project for STM32 Medium-Density Low-Power devices + - Rebuild all files: Project->Rebuild all target files + - Load project image: Debug->Start/Stop Debug Session + - Run program: Debug->Run (F5) + + + RIDE + - Open the AudioSpeaker.rprj project. + - In the configuration toolbar(Project->properties) select the project config: + - STM3210B-EVAL: to configure the project for STM32 Medium-density devices + - STM3210E-EVAL: to configure the project for STM32 High-density devices + - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices + - STM32L152-EVAL: to configure the project for STM32 Medium-Density Low-Power devices + - Rebuild all files: Project->build project + - Load project image: Debug->start(ctrl+D) + - Run program: Debug->Run(ctrl+F9) + + + TASKING + - Open TASKING toolchain. + - Click on File->Import, select General->'Existing Projects into Workspace' + and then click "Next". + - Browse to TASKING workspace directory and select the project: + - under STM32F10B_EVAL directory: to select the project for STM32 Medium-density devices. + - under STM32F10E_EVAL directory: to select the project for STM32 High-density devices + - under STM32F10E_EVAL_XL directory: to select the project for STM32 XL-density devices + - under STM32L152_EVAL directory: to select the project for STM32 Medium-Density Low-Power devices + - Rebuild all project files: Select the project in the "Project explorer" + window then click on Project->build project menu. + - Run program: Select the project in the "Project explorer" window then click + Run->Debug (F11) + + + TrueSTUDIO + - Open the TrueSTUDIO toolchain. + - Click on File->Switch Workspace->Other and browse to TrueSTUDIO workspace + directory. + - Click on File->Import, select General->'Existing Projects into Workspace' + and then click "Next". + - Browse to the TrueSTUDIO workspace directory and select project: + - STM3210B-EVAL: to load the project for STM32 Medium-density devices + - STM3210E-EVAL: to load the project for STM32 High-density devices + - STM3210E_EVAL_XL: to load the project for STM32 XL-density devices + - STM32L152_EVAL: to load the project for STM32 Medium-Density Low-Power devices + - Rebuild all project files: Select the project in the "Project explorer" + window then click on Project->'build project' menu. + - Run program: Select the project in the "Project explorer" window then click + Run->Debug (F11) + +NOTE: + - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. + - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. + - High-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 512 and 1024 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + - Medium-density Low-Power devices are STM32L15xx microcontrollers where the flash + memory density ranges between 64 and 128 Kbytes. +************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****** -- cgit v1.2.3