From 40e04e3772726829d66c12e69f24b03920d79c67 Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Wed, 25 Jan 2017 22:24:18 +0100 Subject: o Moving tinyprintf and stm libraries under thirdparty. --- .../Projects/Audio_Speaker/EWARM/AudioSpeaker.ewd | 4627 ++++++++++++++++++++ .../Projects/Audio_Speaker/EWARM/AudioSpeaker.ewp | 3956 +++++++++++++++++ .../Projects/Audio_Speaker/EWARM/AudioSpeaker.eww | 34 + .../Audio_Speaker/EWARM/stm32f10x_flash.icf | 31 + .../Audio_Speaker/EWARM/stm32l1xx_flash.icf | 31 + .../Audio_Speaker/MDK-ARM/AudioSpeaker.uvproj | 4415 +++++++++++++++++++ .../Projects/Audio_Speaker/RIDE/AudioSpeaker.rapp | 826 ++++ .../Projects/Audio_Speaker/RIDE/AudioSpeaker.rprj | 17 + .../Audio_Speaker/TASKING/STM3210B-EVAL/.cproject | 135 + .../Audio_Speaker/TASKING/STM3210B-EVAL/.project | 192 + .../TASKING/STM3210B-EVAL/STM3210B-EVAL.launch | 44 + .../TASKING/STM3210E-EVAL/STM3210E-EVAL.launch | 44 + .../TASKING/STM3210E-EVAL/TASKING/STM32F10x_hd.lsl | 165 + .../TASKING/STM3210E-EVAL_XL/.project | 207 + .../Audio_Speaker/TASKING/STM32L152-EVAL/.cproject | 137 + .../Audio_Speaker/TASKING/STM32L152-EVAL/.project | 212 + .../TASKING/STM32L152-EVAL/STM32L152-EVAL.launch | 44 + .../TrueSTUDIO/STM3210B-EVAL/.cproject | 267 ++ .../TrueSTUDIO/STM3210B-EVAL/.project | 231 + ....atollic.truestudio.debug.hardware_device.prefs | 12 + .../STM3210B-EVAL/STM3210B-EVAL.elf.launch | 43 + .../TrueSTUDIO/STM3210B-EVAL/stm32_flash.ld | 170 + .../TrueSTUDIO/STM3210E-EVAL/.project | 235 + .../STM3210E-EVAL/STM3210E-EVAL.elf.launch | 43 + .../TrueSTUDIO/STM3210E-EVAL/stm32_flash.ld | 170 + .../TrueSTUDIO/STM3210E-EVAL_XL/.project | 231 + ....atollic.truestudio.debug.hardware_device.prefs | 12 + .../TrueSTUDIO/STM3210E-EVAL_XL/stm32_flash.ld | 170 + .../TrueSTUDIO/STM32L152-EVAL/.project | 241 + ....atollic.truestudio.debug.hardware_device.prefs | 12 + .../STM32L152-EVAL/STM32L152-EVAL.elf.launch | 43 + .../TrueSTUDIO/STM32L152-EVAL/STM32_flash.ld | 171 + .../Projects/Audio_Speaker/inc/i2s_codec.h | 193 + .../Projects/Audio_Speaker/inc/platform_config.h | 129 + .../Projects/Audio_Speaker/inc/stm32_it.h | 63 + .../Projects/Audio_Speaker/inc/stm32f10x_conf.h | 85 + .../Projects/Audio_Speaker/inc/usb_istr.h | 93 + .../Projects/Audio_Speaker/inc/usb_pwr.h | 72 + .../Projects/Audio_Speaker/readme.txt | 148 + .../Projects/Audio_Speaker/src/hw_config.c | 461 ++ .../Projects/Audio_Speaker/src/i2s_codec.c | 1573 +++++++ .../Projects/Audio_Speaker/src/main.c | 87 + .../Projects/Audio_Speaker/src/stm32_it.c | 336 ++ .../Projects/Audio_Speaker/src/system_stm32f10x.c | 917 ++++ .../Projects/Audio_Speaker/src/system_stm32l1xx.c | 533 +++ .../Projects/Audio_Speaker/src/usb_desc.c | 251 ++ .../Projects/Audio_Speaker/src/usb_istr.c | 248 ++ .../Projects/Audio_Speaker/src/usb_pwr.c | 318 ++ 48 files changed, 22675 insertions(+) create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/AudioSpeaker.ewd create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/AudioSpeaker.ewp create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/AudioSpeaker.eww create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/stm32f10x_flash.icf create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/stm32l1xx_flash.icf create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/MDK-ARM/AudioSpeaker.uvproj create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/RIDE/AudioSpeaker.rapp create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/RIDE/AudioSpeaker.rprj create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210B-EVAL/.cproject create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210B-EVAL/.project create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210B-EVAL/STM3210B-EVAL.launch create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210E-EVAL/STM3210E-EVAL.launch create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210E-EVAL/TASKING/STM32F10x_hd.lsl create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210E-EVAL_XL/.project create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM32L152-EVAL/.cproject create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM32L152-EVAL/.project create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM32L152-EVAL/STM32L152-EVAL.launch create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/.cproject create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/.project create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/.settings/com.atollic.truestudio.debug.hardware_device.prefs create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/STM3210B-EVAL.elf.launch create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/stm32_flash.ld create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL/.project create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL/STM3210E-EVAL.elf.launch create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL/stm32_flash.ld create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL_XL/.project create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL_XL/.settings/com.atollic.truestudio.debug.hardware_device.prefs create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL_XL/stm32_flash.ld create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM32L152-EVAL/.project create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM32L152-EVAL/.settings/com.atollic.truestudio.debug.hardware_device.prefs create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM32L152-EVAL/STM32L152-EVAL.elf.launch create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM32L152-EVAL/STM32_flash.ld create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/i2s_codec.h create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/platform_config.h create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/stm32_it.h create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/stm32f10x_conf.h create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/usb_istr.h create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/usb_pwr.h create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/readme.txt create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/hw_config.c create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/i2s_codec.c create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/main.c create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/stm32_it.c create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/system_stm32f10x.c create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/system_stm32l1xx.c create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/usb_desc.c create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/usb_istr.c create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/usb_pwr.c (limited to 'thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker') diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/AudioSpeaker.ewd b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/AudioSpeaker.ewd new file mode 100644 index 0000000..5079872 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/AudioSpeaker.ewd @@ -0,0 +1,4627 @@ + + + + 2 + + STM3210E-EVAL + + ARM + + 1 + + C-SPY + 2 + + 23 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 1 + + + + + + + + ANGEL_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + IARROM_ID + 2 + + 1 + 1 + 1 + + + + + + + + + IJET_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + JLINK_ID + 2 + + 14 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + MACRAIGOR_ID + 2 + + 3 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + PEMICRO_ID + 2 + + 1 + 1 + 1 + + + + + + + + + + + + + + + + + + + RDI_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + + + + + + + RDIJTAGJET_ID + 0 + + 1 + 1 + 1 + + + + + + + + + + + + + + + + STLINK_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 1 + + + + + + + + XDS100_ID + 2 + + 1 + 1 + 1 + + + + + + + + + + + $TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin + 1 + + + + + STM3210B-EVAL + + ARM + + 1 + + C-SPY + 2 + + 23 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 1 + + + + + + + + ANGEL_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + IARROM_ID + 2 + + 1 + 1 + 1 + + + + + + + + + IJET_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + JLINK_ID + 2 + + 14 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + MACRAIGOR_ID + 2 + + 3 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + PEMICRO_ID + 2 + + 1 + 1 + 1 + + + + + + + + + + + + + + + + + + + RDI_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + + + + + + + RDIJTAGJET_ID + 0 + + 1 + 1 + 1 + + + + + + + + + + + + + + + + STLINK_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 1 + + + + + + + + XDS100_ID + 2 + + 1 + 1 + 1 + + + + + + + + + + + $TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin + 1 + + + + + STM3210E-EVAL_XL + + ARM + + 1 + + C-SPY + 2 + + 23 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 1 + + + + + + + + ANGEL_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + IARROM_ID + 2 + + 1 + 1 + 1 + + + + + + + + + IJET_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + JLINK_ID + 2 + + 14 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + MACRAIGOR_ID + 2 + + 3 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + PEMICRO_ID + 2 + + 1 + 1 + 1 + + + + + + + + + + + + + + + + + + + RDI_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + + + + + + + RDIJTAGJET_ID + 0 + + 1 + 1 + 1 + + + + + + + + + + + + + + + + STLINK_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 1 + + + + + + + + XDS100_ID + 2 + + 1 + 1 + 1 + + + + + + + + + + + $TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin + 1 + + + + + STM32L152-EVAL + + ARM + + 1 + + C-SPY + 2 + + 23 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 1 + + + + + + + + ANGEL_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + IARROM_ID + 2 + + 1 + 1 + 1 + + + + + + + + + IJET_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + JLINK_ID + 2 + + 14 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + MACRAIGOR_ID + 2 + + 3 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + PEMICRO_ID + 2 + + 1 + 1 + 1 + + + + + + + + + + + + + + + + + + + RDI_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + + + + + + + RDIJTAGJET_ID + 0 + + 1 + 1 + 1 + + + + + + + + + + + + + + + + STLINK_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 1 + + + + + + + + XDS100_ID + 2 + + 1 + 1 + 1 + + + + + + + + + + + $TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\Quadros\Quadros_EWB6_Plugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin + 1 + + + + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/AudioSpeaker.ewp b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/AudioSpeaker.ewp new file mode 100644 index 0000000..bdc2d27 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/AudioSpeaker.ewp @@ -0,0 +1,3956 @@ + + + + 2 + + STM3210E-EVAL + + ARM + + 1 + + General + 3 + + 21 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 28 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 8 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 15 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + STM3210B-EVAL + + ARM + + 1 + + General + 3 + + 21 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 28 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 8 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 15 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + STM3210E-EVAL_XL + + ARM + + 1 + + General + 3 + + 21 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 28 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 8 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 15 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + STM32L152-EVAL + + ARM + + 1 + + General + 3 + + 21 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 28 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 8 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 15 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + Doc + + $PROJ_DIR$\..\readme.txt + + + + STM32F10x + + STM32L152-EVAL + + + CMSIS + + $PROJ_DIR$\..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\iar\startup_stm32f10x_hd.s + + STM3210B-EVAL + STM3210E-EVAL_XL + + + + $PROJ_DIR$\..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\iar\startup_stm32f10x_ld.s + + STM3210E-EVAL + STM3210B-EVAL + STM3210E-EVAL_XL + + + + $PROJ_DIR$\..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\iar\startup_stm32f10x_ld_vl.s + + STM3210E-EVAL + STM3210B-EVAL + STM3210E-EVAL_XL + + + + $PROJ_DIR$\..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\iar\startup_stm32f10x_md.s + + STM3210E-EVAL + STM3210E-EVAL_XL + + + + $PROJ_DIR$\..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\iar\startup_stm32f10x_md_vl.s + + STM3210E-EVAL + STM3210B-EVAL + STM3210E-EVAL_XL + + + + $PROJ_DIR$\..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\iar\startup_stm32f10x_xl.s + + STM3210E-EVAL + STM3210B-EVAL + + + + $PROJ_DIR$\..\src\system_stm32f10x.c + + STM32L152-EVAL + + + + + STM3210B_EVAL + + STM3210E-EVAL + STM3210E-EVAL_XL + + + $PROJ_DIR$\..\..\..\Utilities\STM32_EVAL\STM3210B_EVAL\stm3210b_eval.c + + + + STM3210E_EVAL + + STM3210B-EVAL + + + $PROJ_DIR$\..\src\i2s_codec.c + + STM3210B-EVAL + STM32L152-EVAL + + + + $PROJ_DIR$\..\..\..\Utilities\STM32_EVAL\STM3210E_EVAL\stm3210e_eval.c + + + + STM32F10x_StdPeriph_Driver + + STM32L152-EVAL + + + $PROJ_DIR$\..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c + + + + + STM32L1xx + + STM3210E-EVAL + STM3210B-EVAL + STM3210E-EVAL_XL + + + CMSIS + + $PROJ_DIR$\..\..\..\Libraries\CMSIS\Device\ST\STM32L1xx\Source\Templates\iar\startup_stm32l1xx_md.s + + + $PROJ_DIR$\..\src\system_stm32l1xx.c + + STM3210E-EVAL + STM3210B-EVAL + STM3210E-EVAL_XL + + + + + STM32L152_EVAL + + $PROJ_DIR$\..\..\..\Utilities\STM32_EVAL\STM32L152_EVAL\stm32l152_eval.c + + + + STM32L1xx_StdPeriph_Driver + + STM3210B-EVAL + STM3210E-EVAL_XL + + + $PROJ_DIR$\..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\misc.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_dac.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_dma.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_exti.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_flash.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_gpio.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_i2c.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_pwr.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_rcc.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_spi.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_syscfg.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_tim.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_usart.c + + + + + USB-FS-Device_Driver + + $PROJ_DIR$\..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_core.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_init.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_int.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_mem.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_regs.c + + + $PROJ_DIR$\..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_sil.c + + + + User + + $PROJ_DIR$\..\src\hw_config.c + + + $PROJ_DIR$\..\src\main.c + + + $PROJ_DIR$\..\src\stm32_it.c + + + $PROJ_DIR$\..\src\usb_desc.c + + + $PROJ_DIR$\..\src\usb_endp.c + + + $PROJ_DIR$\..\src\usb_istr.c + + + $PROJ_DIR$\..\src\usb_prop.c + + + $PROJ_DIR$\..\src\usb_pwr.c + + + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/AudioSpeaker.eww b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/AudioSpeaker.eww new file mode 100644 index 0000000..bff01d7 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/AudioSpeaker.eww @@ -0,0 +1,34 @@ + + + + + $WS_DIR$\AudioSpeaker.ewp + + + + USB-Package-AudioSpeaker + + AudioSpeaker + STM3210B-EVAL + + + AudioSpeaker + STM3210C-EVAL + + + AudioSpeaker + STM3210E-EVAL + + + AudioSpeaker + STM3210E-EVAL_XL + + + AudioSpeaker + STM32L152-EVAL + + + + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/stm32f10x_flash.icf b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/stm32f10x_flash.icf new file mode 100644 index 0000000..6721a0d --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/stm32f10x_flash.icf @@ -0,0 +1,31 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x20017FFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x400; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/stm32l1xx_flash.icf b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/stm32l1xx_flash.icf new file mode 100644 index 0000000..efbc10a --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/EWARM/stm32l1xx_flash.icf @@ -0,0 +1,31 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000 ; +define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x20003FFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x400; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/MDK-ARM/AudioSpeaker.uvproj b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/MDK-ARM/AudioSpeaker.uvproj new file mode 100644 index 0000000..063f796 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/MDK-ARM/AudioSpeaker.uvproj @@ -0,0 +1,4415 @@ + + + + 1.1 + +
### uVision Project, (C) Keil Software
+ + + + STM3210B-EVAL + 0x4 + ARM-ADS + + + STM32F103VB + STMicroelectronics + IRAM(0x20000000-0x20004FFF) IROM(0x8000000-0x801FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3") + + "STARTUP\ST\STM32F10x.s" ("STM32 Startup Code") + UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000) + 4223 + stm32f10x_lib.h + + + + + + + + + + + 0 + + + + ST\STM32F10x\ + ST\STM32F10x\ + + 0 + 0 + 0 + 0 + 1 + + .\STM3210B-EVAL\ + STM3210B-EVAL + 1 + 0 + 0 + 1 + 0 + .\STM3210B-EVAL\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + + + SARMCM3.DLL + + DARMSTM.DLL + -pSTM32F103VB + SARMCM3.DLL + + TARMSTM.DLL + -pSTM32F103VB + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + + 0 + 1 + + + + + + + + + + + + + + BIN\UL2CM3.DLL + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + BIN\UL2CM3.DLL + "" () + + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M3" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 8 + 1 + 0 + 0 + 3 + 5 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x5000 + + + 1 + 0x8000000 + 0x20000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x20000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x5000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 4 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + + + USE_STDPERIPH_DRIVER, STM32F10X_MD, USE_STM3210B_EVAL + + ..\inc;..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Include;..\..\..\Libraries\STM32_USB-FS-Device_Driver\inc;..\..\..\Libraries\STM32F10x_StdPeriph_Driver\inc;..\..\..\Utilities\STM32_EVAL;..\..\..\Utilities\STM32_EVAL\Common;..\..\..\Utilities\STM32_EVAL\STM3210B_EVAL + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x8000000 + 0x20000000 + + + + + + + + + + + + User + + + hw_config.c + 1 + ..\src\hw_config.c + + + main.c + 1 + ..\src\main.c + + + usb_desc.c + 1 + ..\src\usb_desc.c + + + usb_endp.c + 1 + ..\src\usb_endp.c + + + usb_istr.c + 1 + ..\src\usb_istr.c + + + usb_prop.c + 1 + ..\src\usb_prop.c + + + usb_pwr.c + 1 + ..\src\usb_pwr.c + + + misc.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c + + + stm32_it.c + 1 + ..\src\stm32_it.c + + + + + CMSIS + + + startup_stm32f10x_hd.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_hd.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_ld.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_ld.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_ld_vl.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_ld_vl.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_md.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_md.s + + + startup_stm32f10x_md_vl.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_md_vl.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_xl.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_xl.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32l1xx_md.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32L1xx\Source\Templates\arm\startup_stm32l1xx_md.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + system_stm32l1xx.c + 1 + ..\src\system_stm32l1xx.c + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + + + + + + + + + + + + system_stm32f10x.c + 1 + ..\src\system_stm32f10x.c + + + + + USB-FS-Device_Driver + + + usb_core.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_core.c + + + usb_init.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_init.c + + + usb_int.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_int.c + + + usb_mem.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_mem.c + + + usb_regs.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_regs.c + + + usb_sil.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_sil.c + + + + + STM32F10x_StdPeriph_Driver + + + stm32f10x_tim.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c + + + stm32f10x_gpio.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c + + + stm32f10x_i2c.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c + + + stm32f10x_rcc.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c + + + stm32f10x_spi.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c + + + stm32f10x_flash.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c + + + stm32f10x_dac.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c + + + stm32f10x_exti.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c + + + stm32f10x_pwr.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c + + + stm32f10x_usart.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c + + + stm32f10x_sdio.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c + + + stm32f10x_dma.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c + + + + + STM32L1xx_StdPeriph_Driver + + + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 2 + 11 + + + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + + + + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + stm32l1xx_usart.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_usart.c + + + stm32l1xx_dac.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_dac.c + + + stm32l1xx_exti.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_exti.c + + + stm32l1xx_flash.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_flash.c + + + stm32l1xx_i2c.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_i2c.c + + + stm32l1xx_pwr.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_pwr.c + + + stm32l1xx_rcc.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_rcc.c + + + stm32l1xx_syscfg.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_syscfg.c + + + stm32l1xx_tim.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_tim.c + + + stm32l1xx_gpio.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_gpio.c + + + stm32l1xx_dma.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_dma.c + + + stm32l1xx_spi.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_spi.c + + + stm32l1xx_sdio.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_sdio.c + + + + + STM3210B_EVAL + + + stm3210b_eval.c + 1 + ..\..\..\Utilities\STM32_EVAL\STM3210B_EVAL\stm3210b_eval.c + + + + + STM3210E_EVAL + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + + + + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + i2s_codec.c + 1 + ..\src\i2s_codec.c + + + stm3210e_eval.c + 1 + ..\..\..\Utilities\STM32_EVAL\STM3210E_EVAL\stm3210e_eval.c + + + + + STM32L152_EVAL + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + + + + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + stm32l152_eval.c + 1 + ..\..\..\Utilities\STM32_EVAL\STM32L152_EVAL\stm32l152_eval.c + + + + + Doc + + + readme.txt + 5 + ..\readme.txt + + + + + + + STM3210E-EVAL + 0x4 + ARM-ADS + + + STM32F103ZE + STMicroelectronics + IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x807FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3") + + "STARTUP\ST\STM32F10x.s" ("STM32 Startup Code") + UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000) + 4216 + stm32f10x_lib.h + + + + + + + + + + + 0 + + + + ST\STM32F10x\ + ST\STM32F10x\ + + 0 + 0 + 0 + 0 + 1 + + .\STM3210E-EVAL\ + STM3210E-EVAL + 1 + 0 + 0 + 1 + 0 + .\STM3210E-EVAL\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + + + SARMCM3.DLL + + DARMSTM.DLL + -pSTM32F103ZE + SARMCM3.DLL + + TARMSTM.DLL + -pSTM32F103ZE + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + + 0 + 1 + + + + + + + + + + + + + + BIN\UL2CM3.DLL + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + BIN\UL2CM3.DLL + "" () + + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + "Cortex-M3" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 8 + 1 + 0 + 0 + 3 + 5 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x10000 + + + 1 + 0x8000000 + 0x80000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x80000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x10000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 4 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + + + USE_STDPERIPH_DRIVER, STM32F10X_HD, USE_STM3210E_EVAL + + ..\inc;..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Include;..\..\..\Libraries\STM32_USB-FS-Device_Driver\inc;..\..\..\Libraries\STM32F10x_StdPeriph_Driver\inc;..\..\..\Utilities\STM32_EVAL;..\..\..\Utilities\STM32_EVAL\Common;..\..\..\Utilities\STM32_EVAL\STM3210E_EVAL + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x8000000 + 0x20000000 + + + + + + + + + + + + User + + + hw_config.c + 1 + ..\src\hw_config.c + + + main.c + 1 + ..\src\main.c + + + usb_desc.c + 1 + ..\src\usb_desc.c + + + usb_endp.c + 1 + ..\src\usb_endp.c + + + usb_istr.c + 1 + ..\src\usb_istr.c + + + usb_prop.c + 1 + ..\src\usb_prop.c + + + usb_pwr.c + 1 + ..\src\usb_pwr.c + + + misc.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c + + + stm32_it.c + 1 + ..\src\stm32_it.c + + + + + CMSIS + + + startup_stm32f10x_hd.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_hd.s + + + startup_stm32f10x_ld.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_ld.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_ld_vl.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_ld_vl.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_md.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_md.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_md_vl.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_md_vl.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_xl.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_xl.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32l1xx_md.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32L1xx\Source\Templates\arm\startup_stm32l1xx_md.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + system_stm32l1xx.c + 1 + ..\src\system_stm32l1xx.c + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + + + + + + + + + + + + system_stm32f10x.c + 1 + ..\src\system_stm32f10x.c + + + + + USB-FS-Device_Driver + + + usb_core.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_core.c + + + usb_init.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_init.c + + + usb_int.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_int.c + + + usb_mem.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_mem.c + + + usb_regs.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_regs.c + + + usb_sil.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_sil.c + + + + + STM32F10x_StdPeriph_Driver + + + stm32f10x_tim.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c + + + stm32f10x_gpio.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c + + + stm32f10x_i2c.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c + + + stm32f10x_rcc.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c + + + stm32f10x_spi.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c + + + stm32f10x_flash.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c + + + stm32f10x_dac.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c + + + stm32f10x_exti.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c + + + stm32f10x_pwr.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c + + + stm32f10x_usart.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c + + + stm32f10x_sdio.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c + + + stm32f10x_dma.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c + + + + + STM32L1xx_StdPeriph_Driver + + + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 2 + 11 + + + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + + + + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + stm32l1xx_usart.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_usart.c + + + stm32l1xx_dac.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_dac.c + + + stm32l1xx_exti.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_exti.c + + + stm32l1xx_flash.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_flash.c + + + stm32l1xx_i2c.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_i2c.c + + + stm32l1xx_pwr.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_pwr.c + + + stm32l1xx_rcc.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_rcc.c + + + stm32l1xx_syscfg.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_syscfg.c + + + stm32l1xx_tim.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_tim.c + + + stm32l1xx_gpio.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_gpio.c + + + stm32l1xx_dma.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_dma.c + + + stm32l1xx_spi.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_spi.c + + + stm32l1xx_sdio.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_sdio.c + + + + + STM3210B_EVAL + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + + + + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + stm3210b_eval.c + 1 + ..\..\..\Utilities\STM32_EVAL\STM3210B_EVAL\stm3210b_eval.c + + + + + STM3210E_EVAL + + + i2s_codec.c + 1 + ..\src\i2s_codec.c + + + stm3210e_eval.c + 1 + ..\..\..\Utilities\STM32_EVAL\STM3210E_EVAL\stm3210e_eval.c + + + + + STM32L152_EVAL + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + + + + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + stm32l152_eval.c + 1 + ..\..\..\Utilities\STM32_EVAL\STM32L152_EVAL\stm32l152_eval.c + + + + + Doc + + + readme.txt + 5 + ..\readme.txt + + + + + + + STM3210E-EVAL_XL + 0x4 + ARM-ADS + + + STM32F103ZG + STMicroelectronics + IRAM(0x20000000-0x20017FFF) IROM(0x8000000-0x80FFFFF) CLOCK(8000000) CPUTYPE("Cortex-M3") + + "STARTUP\ST\STM32F10x.s" ("STM32 Startup Code") + UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_1024 -FS08000000 -FL0100000) + 5094 + stm32f10x_lib.h + + + + + + + + + + + 0 + + + + ST\STM32F10x\ + ST\STM32F10x\ + + 0 + 0 + 0 + 0 + 1 + + .\STM3210E-EVAL_XL\ + STM3210E-EVAL_XL + 1 + 0 + 0 + 1 + 1 + .\STM3210E-EVAL_XL\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + + + SARMCM3.DLL + + DARMSTM.DLL + -pSTM32F103ZG + SARMCM3.DLL + + TARMSTM.DLL + -pSTM32F103ZG + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + + 0 + 1 + + + + + + + + + + + + + + BIN\UL2CM3.DLL + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + BIN\UL2CM3.DLL + "" () + + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M3" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 8 + 1 + 0 + 0 + 3 + 5 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x18000 + + + 1 + 0x8000000 + 0x100000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x100000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x18000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 4 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + + + USE_STDPERIPH_DRIVER, STM32F10X_HD, USE_STM3210E_EVAL + + ..\inc;..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Include;..\..\..\Libraries\STM32_USB-FS-Device_Driver\inc;..\..\..\Libraries\STM32F10x_StdPeriph_Driver\inc;..\..\..\Utilities\STM32_EVAL;..\..\..\Utilities\STM32_EVAL\Common;..\..\..\Utilities\STM32_EVAL\STM3210E_EVAL + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x8000000 + 0x20000000 + + + + + + + + + + + + User + + + hw_config.c + 1 + ..\src\hw_config.c + + + main.c + 1 + ..\src\main.c + + + usb_desc.c + 1 + ..\src\usb_desc.c + + + usb_endp.c + 1 + ..\src\usb_endp.c + + + usb_istr.c + 1 + ..\src\usb_istr.c + + + usb_prop.c + 1 + ..\src\usb_prop.c + + + usb_pwr.c + 1 + ..\src\usb_pwr.c + + + misc.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c + + + stm32_it.c + 1 + ..\src\stm32_it.c + + + + + CMSIS + + + startup_stm32f10x_hd.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_hd.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_ld.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_ld.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_ld_vl.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_ld_vl.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_md.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_md.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_md_vl.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_md_vl.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_xl.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_xl.s + + + startup_stm32l1xx_md.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32L1xx\Source\Templates\arm\startup_stm32l1xx_md.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + system_stm32l1xx.c + 1 + ..\src\system_stm32l1xx.c + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + + + + + + + + + + + + system_stm32f10x.c + 1 + ..\src\system_stm32f10x.c + + + + + USB-FS-Device_Driver + + + usb_core.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_core.c + + + usb_init.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_init.c + + + usb_int.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_int.c + + + usb_mem.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_mem.c + + + usb_regs.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_regs.c + + + usb_sil.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_sil.c + + + + + STM32F10x_StdPeriph_Driver + + + stm32f10x_tim.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c + + + stm32f10x_gpio.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c + + + stm32f10x_i2c.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c + + + stm32f10x_rcc.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c + + + stm32f10x_spi.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c + + + stm32f10x_flash.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c + + + stm32f10x_dac.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c + + + stm32f10x_exti.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c + + + stm32f10x_pwr.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c + + + stm32f10x_usart.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c + + + stm32f10x_sdio.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c + + + stm32f10x_dma.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c + + + + + STM32L1xx_StdPeriph_Driver + + + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 2 + 11 + + + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + + + + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + stm32l1xx_usart.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_usart.c + + + stm32l1xx_dac.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_dac.c + + + stm32l1xx_exti.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_exti.c + + + stm32l1xx_flash.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_flash.c + + + stm32l1xx_i2c.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_i2c.c + + + stm32l1xx_pwr.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_pwr.c + + + stm32l1xx_rcc.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_rcc.c + + + stm32l1xx_syscfg.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_syscfg.c + + + stm32l1xx_tim.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_tim.c + + + stm32l1xx_gpio.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_gpio.c + + + stm32l1xx_dma.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_dma.c + + + stm32l1xx_spi.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_spi.c + + + stm32l1xx_sdio.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_sdio.c + + + + + STM3210B_EVAL + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + + + + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + stm3210b_eval.c + 1 + ..\..\..\Utilities\STM32_EVAL\STM3210B_EVAL\stm3210b_eval.c + + + + + STM3210E_EVAL + + + i2s_codec.c + 1 + ..\src\i2s_codec.c + + + stm3210e_eval.c + 1 + ..\..\..\Utilities\STM32_EVAL\STM3210E_EVAL\stm3210e_eval.c + + + + + STM32L152_EVAL + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + + + + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + stm32l152_eval.c + 1 + ..\..\..\Utilities\STM32_EVAL\STM32L152_EVAL\stm32l152_eval.c + + + + + Doc + + + readme.txt + 5 + ..\readme.txt + + + + + + + STM32L152-EVAL + 0x4 + ARM-ADS + + + STM32L152VB + STMicroelectronics + IRAM(0x20000000-0x20003FFF) IROM(0x8000000-0x801FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3") + + "STARTUP\ST\STM32L1xx\startup_stm32l1xx_md.s" ("STM32L15xx Medium density Startup Code") + UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32L15x_128 -FS08000000 -FL020000) + 5249 + stm32l1xx.h + + + + + + + + + + SFD\ST\STM32L15x\STM32L15x.sfr + 0 + + + + ST\STM32L1xx\ + ST\STM32L1xx\ + + 0 + 0 + 0 + 0 + 1 + + .\STM32L152-EVAL\ + STM32L152-EVAL + 1 + 0 + 0 + 1 + 0 + .\STM32L152-EVAL\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + + + SARMCM3.DLL + + DCM.DLL + -pCM3 + SARMCM3.DLL + + TCM.DLL + -pCM3 + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + + 0 + 1 + + + + + + + + + + + + + + BIN\UL2CM3.DLL + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + BIN\UL2CM3.DLL + "" () + + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M3" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 8 + 1 + 0 + 0 + 3 + 5 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x4000 + + + 1 + 0x8000000 + 0x20000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x20000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x4000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 4 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + + + USE_STDPERIPH_DRIVER, STM32L1XX_MD, USE_STM32L152_EVAL + + ..\inc;..\..\..\Libraries\CMSIS\Device\ST\STM32L1xx\Include;..\..\..\Libraries\STM32_USB-FS-Device_Driver\inc;..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\inc;..\..\..\Utilities\STM32_EVAL;..\..\..\Utilities\STM32_EVAL\Common;..\..\..\Utilities\STM32_EVAL\STM32L152_EVAL + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x8000000 + 0x20000000 + + + + + + + + + + + + User + + + hw_config.c + 1 + ..\src\hw_config.c + + + main.c + 1 + ..\src\main.c + + + usb_desc.c + 1 + ..\src\usb_desc.c + + + usb_endp.c + 1 + ..\src\usb_endp.c + + + usb_istr.c + 1 + ..\src\usb_istr.c + + + usb_prop.c + 1 + ..\src\usb_prop.c + + + usb_pwr.c + 1 + ..\src\usb_pwr.c + + + misc.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c + + + stm32_it.c + 1 + ..\src\stm32_it.c + + + + + CMSIS + + + startup_stm32f10x_hd.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_hd.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_ld.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_ld.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_ld_vl.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_ld_vl.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_md.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_md.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_md_vl.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_md_vl.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32f10x_xl.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32F10x\Source\Templates\arm\startup_stm32f10x_xl.s + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + startup_stm32l1xx_md.s + 2 + ..\..\..\Libraries\CMSIS\Device\ST\STM32L1xx\Source\Templates\arm\startup_stm32l1xx_md.s + + + system_stm32l1xx.c + 1 + ..\src\system_stm32l1xx.c + + + system_stm32f10x.c + 1 + ..\src\system_stm32f10x.c + + + 2 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + + + + + + + + + + + + + + USB-FS-Device_Driver + + + usb_core.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_core.c + + + usb_init.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_init.c + + + usb_int.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_int.c + + + usb_mem.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_mem.c + + + usb_regs.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_regs.c + + + usb_sil.c + 1 + ..\..\..\Libraries\STM32_USB-FS-Device_Driver\src\usb_sil.c + + + + + STM32F10x_StdPeriph_Driver + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + + + + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + stm32f10x_tim.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c + + + stm32f10x_gpio.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c + + + stm32f10x_i2c.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c + + + stm32f10x_rcc.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c + + + stm32f10x_spi.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c + + + stm32f10x_flash.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c + + + stm32f10x_dac.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c + + + stm32f10x_exti.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c + + + stm32f10x_pwr.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c + + + stm32f10x_usart.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c + + + stm32f10x_sdio.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c + + + stm32f10x_dma.c + 1 + ..\..\..\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c + + + + + STM32L1xx_StdPeriph_Driver + + + stm32l1xx_usart.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_usart.c + + + stm32l1xx_dac.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_dac.c + + + stm32l1xx_exti.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_exti.c + + + stm32l1xx_flash.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_flash.c + + + stm32l1xx_i2c.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_i2c.c + + + stm32l1xx_pwr.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_pwr.c + + + stm32l1xx_rcc.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_rcc.c + + + stm32l1xx_syscfg.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_syscfg.c + + + stm32l1xx_tim.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_tim.c + + + stm32l1xx_gpio.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_gpio.c + + + stm32l1xx_dma.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_dma.c + + + stm32l1xx_spi.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_spi.c + + + stm32l1xx_sdio.c + 1 + ..\..\..\Libraries\STM32L1xx_StdPeriph_Driver\src\stm32l1xx_sdio.c + + + + + STM3210B_EVAL + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + + + + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + stm3210b_eval.c + 1 + ..\..\..\Utilities\STM32_EVAL\STM3210B_EVAL\stm3210b_eval.c + + + + + STM3210E_EVAL + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 2 + 2 + 2 + 11 + + + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + + + + + + + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + + + + + + + + + + + + i2s_codec.c + 1 + ..\src\i2s_codec.c + + + stm3210e_eval.c + 1 + ..\..\..\Utilities\STM32_EVAL\STM3210E_EVAL\stm3210e_eval.c + + + + + STM32L152_EVAL + + + stm32l152_eval.c + 1 + ..\..\..\Utilities\STM32_EVAL\STM32L152_EVAL\stm32l152_eval.c + + + + + Doc + + + readme.txt + 5 + ..\readme.txt + + + + + + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/RIDE/AudioSpeaker.rapp b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/RIDE/AudioSpeaker.rapp new file mode 100644 index 0000000..dc3a59e --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/RIDE/AudioSpeaker.rapp @@ -0,0 +1,826 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
+ + + +
+ + + + + + + + + + + + + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + + + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + + + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + + + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + + + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + + + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + + + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + + + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + + + + + + + + +
+ + + +
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + + + + + + +
+ + + +
+ + + + + + + + + + + + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + +
+ + + +
+ + + + + + + + + + + + + + + +
+ + +
+
+ + + + +
+ + + +
+ + +
+
+ + +
+
+ + +
+ + + +
+ + + + +
+ + + +
+ + +
+ + + +
+ + +
+ + + + + + +
+ + + +
+
+ + +
+ + + +
+ + +
+ + + + + + +
+ + +
+ + + +
+ + + +
+
+ + +
+
+ + +
+ + + +
+ + +
+ + + + + + +
+ + +
+
+ + +
+ + + +
+ + + +
+
+ + + + +
+
+ + +
+ + + +
+ + +
+ + + +
+ + + + +
+ + + + + + +
+ + +
+
+ + +
+ + + +
+ + + +
+
+ + + + +
+
+ + +
+ + + +
+ + + + +
+ + + +
+ + +
+ + + + + + +
+ + + + +
+ + + +
+ + +
+
+ + +
+ + + +
+ + +
+
+ + +
+ + + +
+ + + +
+
+ + +
+ + + + + + +
+ + + + +
+ + + +
+ + +
+
+ + +
+ + + +
+ + +
+
+ + +
+ + + +
+ + + + +
+
+ + + +
+ + + + + + + \ No newline at end of file diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/RIDE/AudioSpeaker.rprj b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/RIDE/AudioSpeaker.rprj new file mode 100644 index 0000000..9477f43 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/RIDE/AudioSpeaker.rprj @@ -0,0 +1,17 @@ + + + + + + +
+ + +
+ + + + + + + \ No newline at end of file diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210B-EVAL/.cproject b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210B-EVAL/.cproject new file mode 100644 index 0000000..68c7412 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210B-EVAL/.cproject @@ -0,0 +1,135 @@ + + + + + + + + + + + + + + + + + + + + + + + + TASKING VX-toolset for ARM Cortex: object linker (TRIAL VERS v4.3r1 Build 142 + TASKING program builder v4.3r1 Build 068 + TASKING VX-toolset for ARM Cortex: assembler v4.3r1 Build 148 + TASKING VX-toolset for ARM Cortex: control program v4.3r1 Build 120 + TASKING VX-toolset for ARM Cortex: C compiler (TRIAL VERSION v4.3r1 Build 683 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210B-EVAL/.project b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210B-EVAL/.project new file mode 100644 index 0000000..fc75ce1 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210B-EVAL/.project @@ -0,0 +1,192 @@ + + + STM3210B-EVAL + + + + + + com.tasking.arm.TskManagedBuilder + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + com.tasking.arm.target + + + + CMSIS + 2 + WORKSPACE_LOC/.metadata/Link + + + Doc + 2 + WORKSPACE_LOC/.metadata/Link + + + STM3210B_EVAL + 2 + WORKSPACE_LOC/.metadata/Link + + + STM32F10x_StdPeriph_Driver + 2 + WORKSPACE_LOC/.metadata/Link + + + USB-FS-Device_Driver + 2 + WORKSPACE_LOC/.metadata/Link + + + User + 2 + WORKSPACE_LOC/.metadata/Link + + + CMSIS/system_stm32f10x.c + 1 + PARENT-2-PROJECT_LOC/src/system_stm32f10x.c + + + Doc/readme.txt + 1 + PARENT-2-PROJECT_LOC/readme.txt + + + STM3210B_EVAL/stm3210b_eval.c + 1 + PARENT-4-PROJECT_LOC/Utilities/STM32_EVAL/STM3210B_EVAL/stm3210b_eval.c + + + STM32F10x_StdPeriph_Driver/misc.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_dac.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_exti.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_flash.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_gpio.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_i2c.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_pwr.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_rcc.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_spi.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_tim.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_usart.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c + + + USB-FS-Device_Driver/usb_core.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_core.c + + + USB-FS-Device_Driver/usb_init.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_init.c + + + USB-FS-Device_Driver/usb_int.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_int.c + + + USB-FS-Device_Driver/usb_mem.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_mem.c + + + USB-FS-Device_Driver/usb_regs.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_regs.c + + + USB-FS-Device_Driver/usb_sil.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_sil.c + + + User/hw_config.c + 1 + PARENT-2-PROJECT_LOC/src/hw_config.c + + + User/main.c + 1 + PARENT-2-PROJECT_LOC/src/main.c + + + User/stm32_it.c + 1 + PARENT-2-PROJECT_LOC/src/stm32_it.c + + + User/usb_desc.c + 1 + PARENT-2-PROJECT_LOC/src/usb_desc.c + + + User/usb_endp.c + 1 + PARENT-2-PROJECT_LOC/src/usb_endp.c + + + User/usb_istr.c + 1 + PARENT-2-PROJECT_LOC/src/usb_istr.c + + + User/usb_prop.c + 1 + PARENT-2-PROJECT_LOC/src/usb_prop.c + + + User/usb_pwr.c + 1 + PARENT-2-PROJECT_LOC/src/usb_pwr.c + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210B-EVAL/STM3210B-EVAL.launch b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210B-EVAL/STM3210B-EVAL.launch new file mode 100644 index 0000000..37a6b98 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210B-EVAL/STM3210B-EVAL.launch @@ -0,0 +1,44 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210E-EVAL/STM3210E-EVAL.launch b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210E-EVAL/STM3210E-EVAL.launch new file mode 100644 index 0000000..547d59a --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210E-EVAL/STM3210E-EVAL.launch @@ -0,0 +1,44 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210E-EVAL/TASKING/STM32F10x_hd.lsl b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210E-EVAL/TASKING/STM32F10x_hd.lsl new file mode 100644 index 0000000..1233f43 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210E-EVAL/TASKING/STM32F10x_hd.lsl @@ -0,0 +1,165 @@ +//////////////////////////////////////////////////////////////////////////// +// +// File : stm32f103_cmsis.lsl +// +// Version : @(#)stm32f103_cmsis.lsl 1.2 09/06/04 +// +// Description : LSL file for the STMicroelectronics STM32F103, CMSIS version +// +// Copyright 2009 Altium BV +// +// NOTE: +// This file is derived from cm3.lsl and stm32f103.lsl. +// It is assumed that the user works with the ARMv7M architecture. +// Other architectures will not work with this lsl file. +// +//////////////////////////////////////////////////////////////////////////// + +// +// We do not want the vectors as defined in arm_arch.lsl +// +#define __NO_DEFAULT_AUTO_VECTORS 1 +#define __NR_OF_VECTORS 76 + + +#ifndef __STACK +# define __STACK 8k +#endif +#ifndef __HEAP +# define __HEAP 2k +#endif +#ifndef __VECTOR_TABLE_ROM_ADDR +# define __VECTOR_TABLE_ROM_ADDR 0x08000000 +#endif +#ifndef __XVWBUF +#define __XVWBUF 256 /* buffer used by CrossView */ +#endif + +#include + +//////////////////////////////////////////////////////////////////////////// +// +// In the STM32F10x, 3 different boot modes can be selected +// - User Flash memory is selected as boot space +// - SystemMemory is selected as boot space +// - Embedded SRAM is selected as boot space +// +// This aliases the physical memory associated with each boot mode to Block +// 000 (0x00000000 boot memory). Even when aliased in the boot memory space, +// the related memory (Flash memory or SRAM) is still accessible at its +// original memory space. +// +// If no memory is defined yet use the following memory settings +// +#ifndef __MEMORY + +memory stm32f103flash +{ + mau = 8; + type = rom; + size = 512k; + map ( size = 512k, dest_offset=0x08000000, dest=bus:ARM:local_bus); +} + +memory stm32f103ram +{ + mau = 8; + type = ram; + size = 64k; + map ( size = 64k, dest_offset=0x20000000, dest=bus:ARM:local_bus); +} + +#endif /* __MEMORY */ + + +// +// Custom vector table defines interrupts according to CMSIS standard +// +# if defined(__CPU_ARMV7M__) +section_setup ::linear +{ + // vector table with handler addresses + vector_table "vector_table" ( vector_size = 4, size = __NR_OF_VECTORS, run_addr = __VECTOR_TABLE_ROM_ADDR, + template = ".text.handler_address", + template_symbol = "_lc_vector_handler", + vector_prefix = "_vector_", + fill = loop, + no_inline + ) + { + vector ( id = 0, fill = "_lc_ub_stack" ); // Top of Stack + vector ( id = 1, fill = "Reset_Handler" ); /* Reset Handler */ + vector( id = 2, optional, fill = "NMI_Handler" ); /* 2 Non Maskable Interrupt */ + vector ( id = 3, optional, fill = "HardFault_Handler" ); + vector ( id = 4, optional, fill = "MemManage_Handler" ); + vector ( id = 5, optional, fill = "BusFault_Handler" ); + vector ( id = 6, optional, fill = "UsageFault_Handler" ); + vector ( id = 11, optional, fill = "SVC_Handler" ); + vector ( id = 12, optional, fill = "DebugMon_Handler" ); + vector ( id = 14, optional, fill = "PendSV_Handler" ); + vector ( id = 15, optional, fill = "SysTick_Handler" ); + + // External Interrupts : + vector ( id = 16, optional, fill = "WWDG_IRQHandler" ); // Window Watchdog + vector ( id = 17, optional, fill = "PVD_IRQHandler" ); // PVD through EXTI Line detect + vector ( id = 18, optional, fill = "TAMPER_IRQHandler" ); // Tamper + vector ( id = 19, optional, fill = "RTC_IRQHandler" ); // RTC + vector ( id = 20, optional, fill = "FLASH_IRQHandler" ); // Flash + vector ( id = 21, optional, fill = "RCC_IRQHandler" ); // RCC + vector ( id = 22, optional, fill = "EXTI0_IRQHandler" ); // EXTI Line 0 + vector ( id = 23, optional, fill = "EXTI1_IRQHandler" ); // EXTI Line 1 + vector ( id = 24, optional, fill = "EXTI2_IRQHandler" ); // EXTI Line 2 + vector ( id = 25, optional, fill = "EXTI3_IRQHandler" ); // EXTI Line 3 + vector ( id = 26, optional, fill = "EXTI4_IRQHandler" ); // EXTI Line 4 + vector ( id = 27, optional, fill = "DMAChannel1_IRQHandler" ); // DMA Channel 1 + vector ( id = 28, optional, fill = "DMAChannel2_IRQHandler" ); // DMA Channel 2 + vector ( id = 29, optional, fill = "DMAChannel3_IRQHandler" ); // DMA Channel 3 + vector ( id = 30, optional, fill = "DMAChannel4_IRQHandler" ); // DMA Channel 4 + vector ( id = 31, optional, fill = "DMAChannel5_IRQHandler" ); // DMA Channel 5 + vector ( id = 32, optional, fill = "DMAChannel6_IRQHandler" ); // DMA Channel 6 + vector ( id = 33, optional, fill = "DMAChannel7_IRQHandler" ); // DMA Channel 7 + vector ( id = 34, optional, fill = "ADC1_2_IRQHandler" ); // ADC1 and ADC2 + vector ( id = 35, optional, fill = "USB_HP_CAN1_TX_IRQHandler" ); // USB High Priority or CAN1 TX + vector ( id = 36, optional, fill = "USB_LP_CAN1_RX0_IRQHandler" ); // USB LowPriority or CAN1 RX0 + vector ( id = 37, optional, fill = "CAN_RX1_IRQHandler" ); // CAN RX1 + vector ( id = 38, optional, fill = "CAN_SCE_IRQHandler" ); // CAN SCE + vector ( id = 39, optional, fill = "EXTI9_5_IRQHandler" ); // EXTI Line 9..5 + vector ( id = 40, optional, fill = "TIM1_BRK_IRQHandler" ); // TIM1 Break + vector ( id = 41, optional, fill = "TIM1_UP_IRQHandler" ); // TIM1 Update + vector ( id = 42, optional, fill = "TIM1_TRG_COM_IRQHandler" ); // TIM1 Trigger and Commutation + vector ( id = 43, optional, fill = "TIM1_CC_IRQHandler" ); // TIM1 Capture Compare + vector ( id = 44, optional, fill = "TIM2_IRQHandler" ); // TIM2 + vector ( id = 45, optional, fill = "TIM3_IRQHandler" ); // TIM3 + vector ( id = 46, optional, fill = "TIM4_IRQHandler" ); // TIM4 + vector ( id = 47, optional, fill = "I2C1_EV_IRQHandler" ); // I2C1 Event + vector ( id = 48, optional, fill = "I2C1_ER_IRQHandler" ); // I2C1 Error + vector ( id = 49, optional, fill = "I2C2_EV_IRQHandler" ); // I2C2 Event + vector ( id = 50, optional, fill = "I2C2_ER_IRQHandler" ); // I2C2 Error + vector ( id = 51, optional, fill = "SPI1_IRQHandler" ); // SPI1 + vector ( id = 52, optional, fill = "SPI2_IRQHandler" ); // SPI2 + vector ( id = 53, optional, fill = "USART1_IRQHandler" ); // USART1 + vector ( id = 54, optional, fill = "USART2_IRQHandler" ); // USART2 + vector ( id = 55, optional, fill = "USART3_IRQHandler" ); // USART3 + vector ( id = 56, optional, fill = "EXTI15_10_IRQHandler" ); // EXTI Line 15..10 + vector ( id = 57, optional, fill = "RTCAlarm_IRQHandler" ); // RTC Alarm through EXTI Line + vector ( id = 58, optional, fill = "USBWakeUp_IRQHandler" ); // USB Wakeup from suspend + vector ( id = 59, optional, fill = "TIM8_BRK_IRQHandler" ); // TIM8 Break + vector ( id = 60, optional, fill = "TIM8_UP_IRQHandler" ); // TIM8 Update + vector ( id = 61, optional, fill = "TIM8_TRG_COM_IRQHandler" ); // TIM8 Trigger and Commutation + vector ( id = 62, optional, fill = "TIM8_CC_IRQHandler" ); // TIM8 Capture Compare + vector ( id = 63, optional, fill = "ADC3_IRQHandler" ); // ADC3 + vector ( id = 64, optional, fill = "FSMC_IRQHandler" ); // FSMC + vector ( id = 65, optional, fill = "SDIO_IRQHandler" ); // SDIO + vector ( id = 66, optional, fill = "TIM5_IRQHandler" ); // TIM5 + vector ( id = 67, optional, fill = "SPI3_IRQHandler" ); // SPI3 + vector ( id = 68, optional, fill = "UART4_IRQHandler" ); // UART4 + vector ( id = 69, optional, fill = "UART5_IRQHandler" ); // UART5 + vector ( id = 70, optional, fill = "TIM6_IRQHandler" ); // TIM6 + vector ( id = 71, optional, fill = "TIM7_IRQHandler" ); // TIM7 + vector ( id = 72, optional, fill = "DMA2_Channel1_IRQHandler" ); // DMA2 Channel1 + vector ( id = 73, optional, fill = "DMA2_Channel2_IRQHandler" ); // DMA2 Channel2 + vector ( id = 74, optional, fill = "DMA2_Channel3_IRQHandler" ); // DMA2 Channel3 + vector ( id = 75, optional, fill = "DMA2_Channel4_5_IRQHandler" ); // DMA2 Channel4 and DMA2 Channel5 + } +} +# endif diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210E-EVAL_XL/.project b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210E-EVAL_XL/.project new file mode 100644 index 0000000..a2b8070 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM3210E-EVAL_XL/.project @@ -0,0 +1,207 @@ + + + STM3210E-EVAL_XL + + + + + + com.tasking.arm.TskManagedBuilder + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + com.tasking.arm.target + + + + CMSIS + 2 + WORKSPACE_LOC/.metadata/Link + + + Doc + 2 + WORKSPACE_LOC/.metadata/Link + + + STM3210E_EVAL + 2 + WORKSPACE_LOC/.metadata/Link + + + STM3210x_StdPeriph_Driver + 2 + WORKSPACE_LOC/.metadata/Link + + + USB-FS-Device_Driver + 2 + WORKSPACE_LOC/.metadata/Link + + + User + 2 + WORKSPACE_LOC/.metadata/Link + + + CMSIS/system_stm32f10x.c + 1 + PARENT-2-PROJECT_LOC/src/system_stm32f10x.c + + + Doc/readme.txt + 1 + PARENT-2-PROJECT_LOC/readme.txt + + + STM3210E_EVAL/i2s_codec.c + 1 + PARENT-2-PROJECT_LOC/src/i2s_codec.c + + + STM3210E_EVAL/stm3210e_eval.c + 1 + PARENT-4-PROJECT_LOC/Utilities/STM32_EVAL/STM3210E_EVAL/stm3210e_eval.c + + + STM3210x_StdPeriph_Driver/misc.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c + + + STM3210x_StdPeriph_Driver/stm32f10x_dac.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c + + + STM3210x_StdPeriph_Driver/stm32f10x_dma.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c + + + STM3210x_StdPeriph_Driver/stm32f10x_exti.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c + + + STM3210x_StdPeriph_Driver/stm32f10x_flash.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c + + + STM3210x_StdPeriph_Driver/stm32f10x_gpio.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c + + + STM3210x_StdPeriph_Driver/stm32f10x_i2c.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c + + + STM3210x_StdPeriph_Driver/stm32f10x_pwr.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c + + + STM3210x_StdPeriph_Driver/stm32f10x_rcc.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c + + + STM3210x_StdPeriph_Driver/stm32f10x_sdio.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_sdio.c + + + STM3210x_StdPeriph_Driver/stm32f10x_spi.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c + + + STM3210x_StdPeriph_Driver/stm32f10x_tim.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c + + + STM3210x_StdPeriph_Driver/stm32f10x_usart.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c + + + USB-FS-Device_Driver/usb_core.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_core.c + + + USB-FS-Device_Driver/usb_init.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_init.c + + + USB-FS-Device_Driver/usb_int.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_int.c + + + USB-FS-Device_Driver/usb_mem.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_mem.c + + + USB-FS-Device_Driver/usb_regs.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_regs.c + + + USB-FS-Device_Driver/usb_sil.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_sil.c + + + User/hw_config.c + 1 + PARENT-2-PROJECT_LOC/src/hw_config.c + + + User/main.c + 1 + PARENT-2-PROJECT_LOC/src/main.c + + + User/stm32_it.c + 1 + PARENT-2-PROJECT_LOC/src/stm32_it.c + + + User/usb_desc.c + 1 + PARENT-2-PROJECT_LOC/src/usb_desc.c + + + User/usb_endp.c + 1 + PARENT-2-PROJECT_LOC/src/usb_endp.c + + + User/usb_istr.c + 1 + PARENT-2-PROJECT_LOC/src/usb_istr.c + + + User/usb_prop.c + 1 + PARENT-2-PROJECT_LOC/src/usb_prop.c + + + User/usb_pwr.c + 1 + PARENT-2-PROJECT_LOC/src/usb_pwr.c + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM32L152-EVAL/.cproject b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM32L152-EVAL/.cproject new file mode 100644 index 0000000..cb9c7d9 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM32L152-EVAL/.cproject @@ -0,0 +1,137 @@ + + + + + + + + + + + + + + + + + + + + + + + + TASKING VX-toolset for ARM Cortex: object linker (TRIAL VERS v4.3r1 Build 142 + TASKING program builder v4.3r1 Build 068 + TASKING VX-toolset for ARM Cortex: assembler v4.3r1 Build 148 + TASKING VX-toolset for ARM Cortex: control program v4.3r1 Build 120 + TASKING VX-toolset for ARM Cortex: C compiler (TRIAL VERSION v4.3r1 Build 683 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM32L152-EVAL/.project b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM32L152-EVAL/.project new file mode 100644 index 0000000..d66bfae --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM32L152-EVAL/.project @@ -0,0 +1,212 @@ + + + STM32L152-EVAL + + + + + + com.tasking.arm.TskManagedBuilder + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + com.tasking.arm.target + + + + CMSIS + 2 + WORKSPACE_LOC/.metadata/Link + + + Doc + 2 + WORKSPACE_LOC/.metadata/Link + + + STM32L152_EVAL + 2 + WORKSPACE_LOC/.metadata/Link + + + STM32L1xx_StdPeriph_Driver + 2 + WORKSPACE_LOC/.metadata/Link + + + USB-FS-Device_Driver + 2 + WORKSPACE_LOC/.metadata/Link + + + User + 2 + WORKSPACE_LOC/.metadata/Link + + + CMSIS/system_stm32l1xx.c + 1 + PARENT-2-PROJECT_LOC/src/system_stm32l1xx.c + + + Doc/readme.txt + 1 + PARENT-2-PROJECT_LOC/readme.txt + + + STM32L152_EVAL/stm32l152_eval.c + 1 + PARENT-4-PROJECT_LOC/Utilities/STM32_EVAL/STM32L152_EVAL/stm32l152_eval.c + + + STM32L1xx_StdPeriph_Driver/misc.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/misc.c + + + STM32L1xx_StdPeriph_Driver/stm32l1xx_adc.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_adc.c + + + STM32L1xx_StdPeriph_Driver/stm32l1xx_dac.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_dac.c + + + STM32L1xx_StdPeriph_Driver/stm32l1xx_dma.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_dma.c + + + STM32L1xx_StdPeriph_Driver/stm32l1xx_exti.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_exti.c + + + STM32L1xx_StdPeriph_Driver/stm32l1xx_flash.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_flash.c + + + STM32L1xx_StdPeriph_Driver/stm32l1xx_gpio.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_gpio.c + + + STM32L1xx_StdPeriph_Driver/stm32l1xx_i2c.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_i2c.c + + + STM32L1xx_StdPeriph_Driver/stm32l1xx_pwr.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_pwr.c + + + STM32L1xx_StdPeriph_Driver/stm32l1xx_rcc.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_rcc.c + + + STM32L1xx_StdPeriph_Driver/stm32l1xx_spi.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_spi.c + + + STM32L1xx_StdPeriph_Driver/stm32l1xx_syscfg.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_syscfg.c + + + STM32L1xx_StdPeriph_Driver/stm32l1xx_tim.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_tim.c + + + STM32L1xx_StdPeriph_Driver/stm32l1xx_usart.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_usart.c + + + USB-FS-Device_Driver/usb_core.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_core.c + + + USB-FS-Device_Driver/usb_init.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_init.c + + + USB-FS-Device_Driver/usb_int.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_int.c + + + USB-FS-Device_Driver/usb_mem.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_mem.c + + + USB-FS-Device_Driver/usb_regs.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_regs.c + + + USB-FS-Device_Driver/usb_sil.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_sil.c + + + User/hw_config.c + 1 + PARENT-2-PROJECT_LOC/src/hw_config.c + + + User/i2s_codec.c + 1 + PARENT-2-PROJECT_LOC/src/i2s_codec.c + + + User/main.c + 1 + PARENT-2-PROJECT_LOC/src/main.c + + + User/stm32_it.c + 1 + PARENT-2-PROJECT_LOC/src/stm32_it.c + + + User/usb_desc.c + 1 + PARENT-2-PROJECT_LOC/src/usb_desc.c + + + User/usb_endp.c + 1 + PARENT-2-PROJECT_LOC/src/usb_endp.c + + + User/usb_istr.c + 1 + PARENT-2-PROJECT_LOC/src/usb_istr.c + + + User/usb_prop.c + 1 + PARENT-2-PROJECT_LOC/src/usb_prop.c + + + User/usb_pwr.c + 1 + PARENT-2-PROJECT_LOC/src/usb_pwr.c + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM32L152-EVAL/STM32L152-EVAL.launch b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM32L152-EVAL/STM32L152-EVAL.launch new file mode 100644 index 0000000..d494039 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TASKING/STM32L152-EVAL/STM32L152-EVAL.launch @@ -0,0 +1,44 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/.cproject b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/.cproject new file mode 100644 index 0000000..ad296ee --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/.cproject @@ -0,0 +1,267 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/.project b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/.project new file mode 100644 index 0000000..65e9603 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/.project @@ -0,0 +1,231 @@ + + + STM3210B-EVAL + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + ?name? + + + + org.eclipse.cdt.make.core.append_environment + true + + + org.eclipse.cdt.make.core.buildArguments + + + + org.eclipse.cdt.make.core.buildCommand + make + + + org.eclipse.cdt.make.core.buildLocation + ${workspace_loc:/STM3210B-EVAL/Debug} + + + org.eclipse.cdt.make.core.contents + org.eclipse.cdt.make.core.activeConfigSettings + + + org.eclipse.cdt.make.core.enableAutoBuild + false + + + org.eclipse.cdt.make.core.enableCleanBuild + true + + + org.eclipse.cdt.make.core.enableFullBuild + true + + + org.eclipse.cdt.make.core.stopOnError + true + + + org.eclipse.cdt.make.core.useDefaultBuildCmd + true + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + CMSIS + 2 + virtual:/virtual + + + Doc + 2 + virtual:/virtual + + + STM32F10x_StdPeriph_Driver + 2 + virtual:/virtual + + + TrueSTUDIO + 2 + virtual:/virtual + + + USB-FS-Device_Driver + 2 + virtual:/virtual + + + User + 2 + virtual:/virtual + + + CMSIS/system_stm32f10x.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/system_stm32f10x.c + + + Doc/readme.txt + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/readme.txt + + + STM32F10x_StdPeriph_Driver/misc.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_exti.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_flash.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_gpio.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_i2c.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_rcc.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_spi.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_tim.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c + + + TrueSTUDIO/startup_stm32f10x_md.s + 1 + PARENT-4-PROJECT_LOC/Libraries/CMSIS/Device/ST/STM32F10x/Source/Templates/TrueSTUDIO/startup_stm32f10x_md.s + + + USB-FS-Device_Driver/usb_core.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_core.c + + + USB-FS-Device_Driver/usb_init.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_init.c + + + USB-FS-Device_Driver/usb_int.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_int.c + + + USB-FS-Device_Driver/usb_mem.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_mem.c + + + USB-FS-Device_Driver/usb_regs.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_regs.c + + + USB-FS-Device_Driver/usb_sil.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_sil.c + + + User/hw_config.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/hw_config.c + + + User/i2s_codec.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/i2s_codec.c + + + User/main.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/main.c + + + User/stm32_it.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/stm32_it.c + + + User/usb_desc.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_desc.c + + + User/usb_endp.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_endp.c + + + User/usb_istr.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_istr.c + + + User/usb_prop.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_prop.c + + + User/usb_pwr.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_pwr.c + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/.settings/com.atollic.truestudio.debug.hardware_device.prefs b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/.settings/com.atollic.truestudio.debug.hardware_device.prefs new file mode 100644 index 0000000..e058ee6 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/.settings/com.atollic.truestudio.debug.hardware_device.prefs @@ -0,0 +1,12 @@ +#Mon Mar 19 11:53:23 GMT+01:00 2012 +BOARD=STM3210B-EVAL +CODE_LOCATION=FLASH +ENDIAN=Little-endian +MCU=STM32F103VB +MCU_VENDOR=STMicroelectronics +MODEL=Lite +PROBE=ST-LINK +PROJECT_FORMAT_VERSION=2 +TARGET=STMicroelectronics\u00AE STM32\u2122 +VERSION=2.3.0 +eclipse.preferences.version=1 diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/STM3210B-EVAL.elf.launch b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/STM3210B-EVAL.elf.launch new file mode 100644 index 0000000..bd4ac0c --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/STM3210B-EVAL.elf.launch @@ -0,0 +1,43 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/stm32_flash.ld b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/stm32_flash.ld new file mode 100644 index 0000000..e0aa35c --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210B-EVAL/stm32_flash.ld @@ -0,0 +1,170 @@ +/* +***************************************************************************** +** +** File : stm32_flash.ld +** +** Abstract : Linker script for STM32F103VB Device with +** 128KByte FLASH, 20KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Environment : Atollic TrueSTUDIO(R) +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +** (c)Copyright Atollic AB. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the Atollic TrueSTUDIO(R) toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20005000; /* end of 20K RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0; /* required amount of heap */ +_Min_Stack_Size = 0x800; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 20K + MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .ARM.attributes 0 : { *(.ARM.attributes) } + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(.fini_array*)) + KEEP (*(SORT(.fini_array.*))) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = .; + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : AT ( _sidata ) + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + PROVIDE ( end = _ebss ); + PROVIDE ( _end = _ebss ); + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + /* MEMORY_bank1 section, code must be located here explicitly */ + /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */ + .memory_b1_text : + { + *(.mb1text) /* .mb1text sections (code) */ + *(.mb1text*) /* .mb1text* sections (code) */ + *(.mb1rodata) /* read-only data (constants) */ + *(.mb1rodata*) + } >MEMORY_B1 + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } +} diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL/.project b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL/.project new file mode 100644 index 0000000..e6f3506 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL/.project @@ -0,0 +1,235 @@ + + + STM3210E-EVAL + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + ?children? + ?name?=outputEntries\|?children?=?name?=entry\\\\\\\|\\\|\|| + + + ?name? + + + + org.eclipse.cdt.make.core.append_environment + true + + + org.eclipse.cdt.make.core.buildArguments + + + + org.eclipse.cdt.make.core.buildCommand + make + + + org.eclipse.cdt.make.core.buildLocation + ${workspace_loc:/STM3210E-EVAL/Debug} + + + org.eclipse.cdt.make.core.contents + org.eclipse.cdt.make.core.activeConfigSettings + + + org.eclipse.cdt.make.core.enableAutoBuild + false + + + org.eclipse.cdt.make.core.enableCleanBuild + true + + + org.eclipse.cdt.make.core.enableFullBuild + true + + + org.eclipse.cdt.make.core.stopOnError + true + + + org.eclipse.cdt.make.core.useDefaultBuildCmd + true + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + CMSIS + 2 + virtual:/virtual + + + Doc + 2 + virtual:/virtual + + + STM32F10x_StdPeriph_Driver + 2 + virtual:/virtual + + + TrueSTUDIO + 2 + virtual:/virtual + + + USB-FS-Device_Driver + 2 + virtual:/virtual + + + User + 2 + virtual:/virtual + + + CMSIS/system_stm32f10x.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/system_stm32f10x.c + + + Doc/readme.txt + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/readme.txt + + + STM32F10x_StdPeriph_Driver/misc.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_exti.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_flash.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_gpio.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_i2c.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_rcc.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_spi.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_tim.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c + + + TrueSTUDIO/startup_stm32f10x_hd.s + 1 + PARENT-4-PROJECT_LOC/Libraries/CMSIS/Device/ST/STM32F10x/Source/Templates/TrueSTUDIO/startup_stm32f10x_hd.s + + + USB-FS-Device_Driver/usb_core.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_core.c + + + USB-FS-Device_Driver/usb_init.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_init.c + + + USB-FS-Device_Driver/usb_int.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_int.c + + + USB-FS-Device_Driver/usb_mem.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_mem.c + + + USB-FS-Device_Driver/usb_regs.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_regs.c + + + USB-FS-Device_Driver/usb_sil.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_sil.c + + + User/hw_config.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/hw_config.c + + + User/i2s_codec.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/i2s_codec.c + + + User/main.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/main.c + + + User/stm32_it.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/stm32_it.c + + + User/usb_desc.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_desc.c + + + User/usb_endp.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_endp.c + + + User/usb_istr.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_istr.c + + + User/usb_prop.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_prop.c + + + User/usb_pwr.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_pwr.c + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL/STM3210E-EVAL.elf.launch b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL/STM3210E-EVAL.elf.launch new file mode 100644 index 0000000..4494ab7 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL/STM3210E-EVAL.elf.launch @@ -0,0 +1,43 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL/stm32_flash.ld b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL/stm32_flash.ld new file mode 100644 index 0000000..8320534 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL/stm32_flash.ld @@ -0,0 +1,170 @@ +/* +***************************************************************************** +** +** File : stm32_flash.ld +** +** Abstract : Linker script for STM32F103ZE Device with +** 512KByte FLASH, 64KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Environment : Atollic TrueSTUDIO(R) +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +** (c)Copyright Atollic AB. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the Atollic TrueSTUDIO(R) toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20010000; /* end of 64K RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0; /* required amount of heap */ +_Min_Stack_Size = 0x800; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K + MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .ARM.attributes 0 : { *(.ARM.attributes) } + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(.fini_array*)) + KEEP (*(SORT(.fini_array.*))) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = .; + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : AT ( _sidata ) + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + PROVIDE ( end = _ebss ); + PROVIDE ( _end = _ebss ); + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + /* MEMORY_bank1 section, code must be located here explicitly */ + /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */ + .memory_b1_text : + { + *(.mb1text) /* .mb1text sections (code) */ + *(.mb1text*) /* .mb1text* sections (code) */ + *(.mb1rodata) /* read-only data (constants) */ + *(.mb1rodata*) + } >MEMORY_B1 + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } +} diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL_XL/.project b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL_XL/.project new file mode 100644 index 0000000..0fbff9c --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL_XL/.project @@ -0,0 +1,231 @@ + + + STM3210E-EVAL_XL + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + ?name? + + + + org.eclipse.cdt.make.core.append_environment + true + + + org.eclipse.cdt.make.core.buildArguments + + + + org.eclipse.cdt.make.core.buildCommand + make + + + org.eclipse.cdt.make.core.buildLocation + ${workspace_loc:/STM32F103ZG/Debug} + + + org.eclipse.cdt.make.core.contents + org.eclipse.cdt.make.core.activeConfigSettings + + + org.eclipse.cdt.make.core.enableAutoBuild + false + + + org.eclipse.cdt.make.core.enableCleanBuild + true + + + org.eclipse.cdt.make.core.enableFullBuild + true + + + org.eclipse.cdt.make.core.stopOnError + true + + + org.eclipse.cdt.make.core.useDefaultBuildCmd + true + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + CMSIS + 2 + virtual:/virtual + + + Doc + 2 + virtual:/virtual + + + STM32F10x_StdPeriph_Driver + 2 + virtual:/virtual + + + TrueSTUDIO + 2 + virtual:/virtual + + + USB-FS-Device_Driver + 2 + virtual:/virtual + + + User + 2 + virtual:/virtual + + + CMSIS/system_stm32f10x.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/system_stm32f10x.c + + + Doc/readme.txt + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/readme.txt + + + STM32F10x_StdPeriph_Driver/misc.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_exti.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_flash.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_gpio.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_i2c.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_rcc.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_spi.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c + + + STM32F10x_StdPeriph_Driver/stm32f10x_tim.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c + + + TrueSTUDIO/startup_stm32f10x_xl.s + 1 + PARENT-4-PROJECT_LOC/Libraries/CMSIS/Device/ST/STM32F10x/Source/Templates/TrueSTUDIO/startup_stm32f10x_xl.s + + + USB-FS-Device_Driver/usb_core.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_core.c + + + USB-FS-Device_Driver/usb_init.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_init.c + + + USB-FS-Device_Driver/usb_int.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_int.c + + + USB-FS-Device_Driver/usb_mem.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_mem.c + + + USB-FS-Device_Driver/usb_regs.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_regs.c + + + USB-FS-Device_Driver/usb_sil.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_sil.c + + + User/hw_config.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/hw_config.c + + + User/i2s_codec.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/i2s_codec.c + + + User/main.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/main.c + + + User/stm32_it.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/stm32_it.c + + + User/usb_desc.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_desc.c + + + User/usb_endp.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_endp.c + + + User/usb_istr.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_istr.c + + + User/usb_prop.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_prop.c + + + User/usb_pwr.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_pwr.c + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL_XL/.settings/com.atollic.truestudio.debug.hardware_device.prefs b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL_XL/.settings/com.atollic.truestudio.debug.hardware_device.prefs new file mode 100644 index 0000000..d551f74 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL_XL/.settings/com.atollic.truestudio.debug.hardware_device.prefs @@ -0,0 +1,12 @@ +#Mon Mar 19 11:54:24 GMT+01:00 2012 +BOARD=STM3210E-EVAL_XL +CODE_LOCATION=FLASH +ENDIAN=Little-endian +MCU=STM32F103ZG +MCU_VENDOR=STMicroelectronics +MODEL=Lite +PROBE=ST-LINK +PROJECT_FORMAT_VERSION=2 +TARGET=STMicroelectronics\u00AE STM32\u2122 +VERSION=2.3.0 +eclipse.preferences.version=1 diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL_XL/stm32_flash.ld b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL_XL/stm32_flash.ld new file mode 100644 index 0000000..b1c6965 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM3210E-EVAL_XL/stm32_flash.ld @@ -0,0 +1,170 @@ +/* +***************************************************************************** +** +** File : stm32_flash.ld +** +** Abstract : Linker script for STM32F103ZG Device with +** 1MByte FLASH, 96KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Environment : Atollic TrueSTUDIO(R) +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +** (c)Copyright Atollic AB. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the Atollic TrueSTUDIO(R) toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20018000; /* end of 96K RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0; /* required amount of heap */ +_Min_Stack_Size = 0x800; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1M + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K + MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .ARM.attributes 0 : { *(.ARM.attributes) } + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(.fini_array*)) + KEEP (*(SORT(.fini_array.*))) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = .; + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : AT ( _sidata ) + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + PROVIDE ( end = _ebss ); + PROVIDE ( _end = _ebss ); + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + /* MEMORY_bank1 section, code must be located here explicitly */ + /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */ + .memory_b1_text : + { + *(.mb1text) /* .mb1text sections (code) */ + *(.mb1text*) /* .mb1text* sections (code) */ + *(.mb1rodata) /* read-only data (constants) */ + *(.mb1rodata*) + } >MEMORY_B1 + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } +} diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM32L152-EVAL/.project b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM32L152-EVAL/.project new file mode 100644 index 0000000..0e3555e --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM32L152-EVAL/.project @@ -0,0 +1,241 @@ + + + STM32L152-EVAL + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + ?name? + + + + org.eclipse.cdt.make.core.append_environment + true + + + org.eclipse.cdt.make.core.buildArguments + + + + org.eclipse.cdt.make.core.buildCommand + make + + + org.eclipse.cdt.make.core.buildLocation + ${workspace_loc:/STM3210B-EVAL/Debug} + + + org.eclipse.cdt.make.core.contents + org.eclipse.cdt.make.core.activeConfigSettings + + + org.eclipse.cdt.make.core.enableAutoBuild + false + + + org.eclipse.cdt.make.core.enableCleanBuild + true + + + org.eclipse.cdt.make.core.enableFullBuild + true + + + org.eclipse.cdt.make.core.stopOnError + true + + + org.eclipse.cdt.make.core.useDefaultBuildCmd + true + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + CMSIS + 2 + virtual:/virtual + + + Doc + 2 + virtual:/virtual + + + STM32L1xx_StdPeriph_Driver + 2 + virtual:/virtual + + + TrueSTUDIO + 2 + virtual:/virtual + + + USB-FS-Device_Driver + 2 + virtual:/virtual + + + User + 2 + virtual:/virtual + + + CMSIS/system_stm32l1xx.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/system_stm32l1xx.c + + + Doc/readme.txt + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/readme.txt + + + STM32L1xx_StdPeriph_Driver/STM32l1xx_flash.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/STM32l1xx_flash.c + + + STM32L1xx_StdPeriph_Driver/STM32l1xx_gpio.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/STM32l1xx_gpio.c + + + STM32L1xx_StdPeriph_Driver/STM32l1xx_i2c.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/STM32l1xx_i2c.c + + + STM32L1xx_StdPeriph_Driver/STM32l1xx_rcc.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/STM32l1xx_rcc.c + + + STM32L1xx_StdPeriph_Driver/STM32l1xx_spi.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/STM32l1xx_spi.c + + + STM32L1xx_StdPeriph_Driver/STM32l1xx_tim.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/STM32l1xx_tim.c + + + STM32L1xx_StdPeriph_Driver/misc.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/misc.c + + + STM32L1xx_StdPeriph_Driver/stm32l1xx_dac.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_dac.c + + + STM32L1xx_StdPeriph_Driver/stm32l1xx_exti.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_exti.c + + + STM32L1xx_StdPeriph_Driver/stm32l1xx_syscfg.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32L1xx_StdPeriph_Driver/src/stm32l1xx_syscfg.c + + + TrueSTUDIO/startup_stm32l1xx_md.s + 1 + PARENT-4-PROJECT_LOC/Libraries/CMSIS/Device/ST/STM32L1xx/Source/Templates/TrueSTUDIO/startup_stm32l1xx_md.s + + + USB-FS-Device_Driver/usb_core.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_core.c + + + USB-FS-Device_Driver/usb_init.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_init.c + + + USB-FS-Device_Driver/usb_int.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_int.c + + + USB-FS-Device_Driver/usb_mem.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_mem.c + + + USB-FS-Device_Driver/usb_regs.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_regs.c + + + USB-FS-Device_Driver/usb_sil.c + 1 + PARENT-4-PROJECT_LOC/Libraries/STM32_USB-FS-Device_Driver/src/usb_sil.c + + + User/hw_config.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/hw_config.c + + + User/i2s_codec.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/i2s_codec.c + + + User/main.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/main.c + + + User/stm32_it.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/stm32_it.c + + + User/usb_desc.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_desc.c + + + User/usb_endp.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_endp.c + + + User/usb_istr.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_istr.c + + + User/usb_prop.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_prop.c + + + User/usb_pwr.c + 1 + PARENT-4-PROJECT_LOC/Projects/Audio_Speaker/src/usb_pwr.c + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM32L152-EVAL/.settings/com.atollic.truestudio.debug.hardware_device.prefs b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM32L152-EVAL/.settings/com.atollic.truestudio.debug.hardware_device.prefs new file mode 100644 index 0000000..37e4638 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM32L152-EVAL/.settings/com.atollic.truestudio.debug.hardware_device.prefs @@ -0,0 +1,12 @@ +#Mon Mar 19 11:55:31 GMT+01:00 2012 +BOARD=STM32L152-EVAL +CODE_LOCATION=FLASH +ENDIAN=Little-endian +MCU=STM32L152VB +MCU_VENDOR=STMicroelectronics +MODEL=Lite +PROBE=ST-LINK +PROJECT_FORMAT_VERSION=2 +TARGET=STMicroelectronics\u00AE STM32\u2122 +VERSION=2.3.0 +eclipse.preferences.version=1 diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM32L152-EVAL/STM32L152-EVAL.elf.launch b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM32L152-EVAL/STM32L152-EVAL.elf.launch new file mode 100644 index 0000000..51982c5 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM32L152-EVAL/STM32L152-EVAL.elf.launch @@ -0,0 +1,43 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM32L152-EVAL/STM32_flash.ld b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM32L152-EVAL/STM32_flash.ld new file mode 100644 index 0000000..1be62d5 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/TrueSTUDIO/STM32L152-EVAL/STM32_flash.ld @@ -0,0 +1,171 @@ +/* +***************************************************************************** +** +** File : stm32_flash.ld +** +** Abstract : Linker script for stm32l1xx_md Device with +** 128KByte FLASH, 16KByte RAM +** +** Set heap size, stack size and stack location according +** to application requirements. +** +** Set memory bank area and size if external memory is used. +** +** Target : STMicroelectronics STM32 +** +** Environment : Atollic TrueSTUDIO(R) +** +** Distribution: The file is distributed “as is,” without any warranty +** of any kind. +** +** (c)Copyright Atollic AB. +** You may use this file as-is or modify it according to the needs of your +** project. Distribution of this file (unmodified or modified) is not +** permitted. Atollic AB permit registered Atollic TrueSTUDIO(R) users the +** rights to distribute the assembled, compiled & linked contents of this +** file as part of an application binary file, provided that it is built +** using the Atollic TrueSTUDIO(R) toolchain. +** +***************************************************************************** +*/ + +/* Entry Point */ +ENTRY(Reset_Handler) + +/* Highest address of the user mode stack */ +_estack = 0x20004000; /* end of 16K RAM */ + +/* Generate a link error if heap and stack don't fit into RAM */ +_Min_Heap_Size = 0; /* required amount of heap */ +_Min_Stack_Size = 0x80; /* required amount of stack */ + +/* Specify the memory areas */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K + RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 16K + MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K +} + +/* Define output sections */ +SECTIONS +{ + /* The startup code goes first into FLASH */ + .isr_vector : + { + . = ALIGN(4); + KEEP(*(.isr_vector)) /* Startup code */ + . = ALIGN(4); + } >FLASH + + /* The program code and other data goes into FLASH */ + .text : + { + . = ALIGN(4); + *(.text) /* .text sections (code) */ + *(.text*) /* .text* sections (code) */ + *(.rodata) /* .rodata sections (constants, strings, etc.) */ + *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ + *(.glue_7) /* glue arm to thumb code */ + *(.glue_7t) /* glue thumb to arm code */ + *(.eh_frame) + + KEEP (*(.init)) + KEEP (*(.fini)) + + . = ALIGN(4); + _etext = .; /* define a global symbols at end of code */ + } >FLASH + + + .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH + .ARM : { + __exidx_start = .; + *(.ARM.exidx*) + __exidx_end = .; + } >FLASH + + .preinit_array : + { + PROVIDE_HIDDEN (__preinit_array_start = .); + KEEP (*(.preinit_array*)) + PROVIDE_HIDDEN (__preinit_array_end = .); + } >FLASH + .init_array : + { + PROVIDE_HIDDEN (__init_array_start = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array*)) + PROVIDE_HIDDEN (__init_array_end = .); + } >FLASH + .fini_array : + { + PROVIDE_HIDDEN (__fini_array_start = .); + KEEP (*(.fini_array*)) + KEEP (*(SORT(.fini_array.*))) + PROVIDE_HIDDEN (__fini_array_end = .); + } >FLASH + + /* used by the startup to initialize data */ + _sidata = .; + + /* Initialized data sections goes into RAM, load LMA copy after code */ + .data : AT ( _sidata ) + { + . = ALIGN(4); + _sdata = .; /* create a global symbol at data start */ + *(.data) /* .data sections */ + *(.data*) /* .data* sections */ + + . = ALIGN(4); + _edata = .; /* define a global symbol at data end */ + } >RAM + + /* Uninitialized data section */ + . = ALIGN(4); + .bss : + { + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; /* define a global symbol at bss start */ + __bss_start__ = _sbss; + *(.bss) + *(.bss*) + *(COMMON) + + . = ALIGN(4); + _ebss = .; /* define a global symbol at bss end */ + __bss_end__ = _ebss; + } >RAM + + PROVIDE ( end = _ebss ); + PROVIDE ( _end = _ebss ); + + /* User_heap_stack section, used to check that there is enough RAM left */ + ._user_heap_stack : + { + . = ALIGN(4); + . = . + _Min_Heap_Size; + . = . + _Min_Stack_Size; + . = ALIGN(4); + } >RAM + + /* MEMORY_bank1 section, code must be located here explicitly */ + /* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */ + .memory_b1_text : + { + *(.mb1text) /* .mb1text sections (code) */ + *(.mb1text*) /* .mb1text* sections (code) */ + *(.mb1rodata) /* read-only data (constants) */ + *(.mb1rodata*) + } >MEMORY_B1 + + /* Remove information from the standard libraries */ + /DISCARD/ : + { + libc.a ( * ) + libm.a ( * ) + libgcc.a ( * ) + } + + .ARM.attributes 0 : { *(.ARM.attributes) } +} diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/i2s_codec.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/i2s_codec.h new file mode 100644 index 0000000..c392004 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/i2s_codec.h @@ -0,0 +1,193 @@ +/** + ****************************************************************************** + * @file i2s_codec.h + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief This file contains all the functions prototypes for the I2S codec + * firmware driver. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __I2S_CODEC_H +#define __I2S_CODEC_H + +/* .WAV file format : + + Endian Offset Length Contents + big 0 4 bytes 'RIFF' // 0x52494646 + little 4 4 bytes + big 8 4 bytes 'WAVE' // 0x57415645 + +Next, the fmt chunk describes the sample format: + + big 12 4 bytes 'fmt ' // 0x666D7420 + little 16 4 bytes 0x00000010 // Length of the fmt data (16 bytes) + little 20 2 bytes 0x0001 // Format tag: 1 = PCM + little 22 2 bytes // Channels: 1 = mono, 2 = stereo + little 24 4 bytes // Samples per second: e.g., 22050 + little 28 4 bytes // sample rate * block align + little 32 2 bytes // channels * bits/sample / 8 + little 34 2 bytes // 8 or 16 + +Finally, the data chunk contains the sample data: + + big 36 4 bytes 'data' // 0x64617461 + little 40 4 bytes + little 44 * + +*/ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" + +/* Exported types ------------------------------------------------------------*/ + +/* Audio file information structure */ +typedef struct +{ + uint32_t RIFFchunksize; + uint16_t FormatTag; + uint16_t NumChannels; + uint32_t SampleRate; + uint32_t ByteRate; + uint16_t BlockAlign; + uint16_t BitsPerSample; + uint32_t DataSize; +} WAVE_FormatTypeDef; + +/* Error Identification structure */ +typedef enum +{ + Valid_WAVE_File = 0, + Unvalid_RIFF_ID, + Unvalid_WAVE_Format, + Unvalid_FormatChunk_ID, + Unsupporetd_FormatTag, + Unsupporetd_Number_Of_Channel, + Unsupporetd_Sample_Rate, + Unsupporetd_Bits_Per_Sample, + Unvalid_DataChunk_ID, + Unsupporetd_ExtraFormatBytes, + Unvalid_FactChunk_ID +} ErrorCode; + +/* Exported constants --------------------------------------------------------*/ + +/* Codec output DEVICE */ +#define OutputDevice_SPEAKER 1 +#define OutputDevice_HEADPHONE 2 +#define OutputDevice_BOTH 3 + +/* VOLUME control constants */ +#define DEFAULT_VOL 0x52 +#define VolumeDirection_HIGH 0xF +#define VolumeDirection_LOW 0xA +#define VolumeDirection_LEVEL 0x0 +#define VOLStep 4 + +/* Forward and Rewind constants */ +#define STEP_FORWARD 2 /* 2% of wave file data length*/ +#define STEP_BACK 6 /* 6% of wave file data length*/ + +/* Codec POWER DOWN modes */ +#define CodecPowerDown_HW 1 +#define CodecPowerDown_SW 2 + +/* Audio Play STATUS */ +#define AudioPlayStatus_STOPPED 0 +#define AudioPlayStatus_PLAYING 1 +#define AudioPlayStatus_PAUSED 2 + +/* MUTE commands */ +#define MUTE_ON 1 +#define MUTE_OFF 0 + +/* I2S configuration parameters */ +#define I2S_STANDARD I2S_Standard_Phillips +#define I2S_MCLKOUTPUT I2S_MCLKOutput_Enable + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + + /* CONFIGURATION */ +uint32_t I2S_CODEC_Init(uint32_t OutputDevice, uint32_t Address); +void I2S_CODEC_ReplayConfig(uint32_t Repetions); + + /* AUDIO CONTROL */ +uint32_t I2S_CODEC_Play(uint32_t AudioStartPosition); +uint32_t I2S_CODEC_Pause(void); +uint32_t I2S_CODEC_Stop(void); +uint32_t I2S_CODEC_ControlVolume(uint32_t direction, uint8_t volume); +void I2S_CODEC_Mute(uint32_t Command); +void I2S_CODEC_ForwardPlay(uint32_t Step); +void I2S_CODEC_RewindPlay(uint32_t Step); + + /* EXTRA CONTROLS */ +void I2S_CODEC_PowerDown(uint32_t CodecPowerDown_Mode); +void I2S_CODEC_Reset(void); +uint32_t I2S_CODEC_SpeakerHeadphoneSwap(uint32_t CODEC_AudioOutput, uint32_t Address); +uint8_t GetVar_CurrentVolume(void); + +/* Medium Layer Codec Functions ----------------------------------------------*/ +void I2S_CODEC_DataTransfer(void); +void I2S_CODEC_UpdateStatus(void); +uint32_t GetVar_DataStartAddr(void); +ErrorCode I2S_CODEC_WaveParsing(uint8_t* HeaderTab); +uint32_t GetVar_CurrentOutputDevice(void); + +uint32_t GetVar_AudioDataIndex(void); +void SetVar_AudioDataIndex(uint32_t value); +void ResetVar_AudioDataIndex(void); +void IncrementVar_AudioDataIndex(uint32_t IncrementNumber); +void DecrementVar_AudioDataIndex(uint32_t DecrementNumber); + +uint32_t GetVar_AudioReplay(void); +void Decrement_AudioReplay(void); + +uint32_t GetVar_AudioPlayStatus(void); +uint32_t SetVar_AudioPlayStatus(uint32_t Status); + +uint16_t GetVar_i2saudiofreq(void); +uint32_t GetVar_AudioDataLength(void); + +/* Low Layer Codec Function --------------------------------------------------*/ +uint32_t SetVar_SendDummyData(void); +uint32_t ResetVar_SendDummyData(void); +uint32_t GetVar_SendDummyData(void); +uint32_t AudioFile_Init(void); + +void I2S_GPIO_Config(void); +void I2S_Config(uint16_t Standard, uint16_t MCLKOutput, uint16_t AudioFreq); +uint32_t CODEC_Config(uint16_t AudioOutput, uint16_t I2S_Standard, uint16_t I2S_MCLKOutput, uint8_t Volume); + +uint32_t Media_Init(void); +void Media_BufferRead(uint8_t* pBuffer, uint32_t ReadAddr, uint16_t NumByteToRead); +void Media_StartReadSequence(uint32_t ReadAddr); +uint16_t Media_ReadHalfWord(uint32_t Offset); +uint8_t Media_ReadByte(uint32_t Offset); + +void delay(__IO uint32_t nCount); + +#endif /* __I2S_CODEC_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/platform_config.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/platform_config.h new file mode 100644 index 0000000..440c531 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/platform_config.h @@ -0,0 +1,129 @@ +/** + ****************************************************************************** + * @file platform_config.h + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Evaluation board specific configuration file. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __PLATFORM_CONFIG_H +#define __PLATFORM_CONFIG_H + +/* Includes ------------------------------------------------------------------*/ + +#if defined(STM32L1XX_MD) + #include "stm32l1xx.h" + #if defined (USE_STM32L152_EVAL) + #include "stm32l152_eval.h" + #endif /* USE_STM32L152_EVAL */ +#elif defined (STM32F10X_MD) || defined (STM32F10X_HD) || defined (STM32F10X_XL) + #include "stm32f10x.h" + #if defined (USE_STM3210B_EVAL) + #include "stm3210b_eval.h" + #elif defined (USE_STM3210E_EVAL) + #include "i2s_codec.h" + #include "stm3210e_eval.h" + #else + #error "Missing define: USE_STM3210B_EVAL or USE_STM3210E_EVAL" + #endif /* USE_STM3210B_EVAL */ +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Uncomment the line corresponding to the STMicroelectronics evaluation board + used to run the example */ +#if !defined (USE_STM3210B_EVAL) && !defined (USE_STM3210E_EVAL) && !defined (USE_STM32L152_EVAL) + //#define USE_STM3210B_EVAL + //#define USE_STM3210E_EVAL +#define USE_STM32L152_EVAL + +#endif + +/*Unique Devices IDs register set*/ + +#if defined(STM32L1XX_MD) + +#define ID1 (0x1FF80050) +#define ID2 (0x1FF80054) +#define ID3 (0x1FF80064) + +#else /*STM32F1x*/ + +#define ID1 (0x1FFFF7E8) +#define ID2 (0x1FFFF7EC) +#define ID3 (0x1FFFF7F0) + +#endif + +/* Define the STM32F10x hardware depending on the used evaluation board */ +#ifdef USE_STM3210B_EVAL + + #define USB_DISCONNECT GPIOD + #define USB_DISCONNECT_PIN GPIO_Pin_9 + #define RCC_APB2Periph_GPIO_DISCONNECT RCC_APB2Periph_GPIOD + +#elif defined(USE_STM3210E_EVAL) + + #define USB_DISCONNECT GPIOB + #define USB_DISCONNECT_PIN GPIO_Pin_14 + #define RCC_APB2Periph_GPIO_DISCONNECT RCC_APB2Periph_GPIOB + +#elif defined (USE_STM32L152_EVAL) + /* + For STM32L15xx devices it is possible to use the internal USB pullup + controlled by register SYSCFG_PMC (refer to RM0038 reference manual for + more details). + It is also possible to use external pullup (and disable the internal pullup) + by setting the define USB_USE_EXTERNAL_PULLUP in file platform_config.h + and configuring the right pin to be used for the external pull up configuration. + To have more details on how to use an external pull up, please refer to + STM3210E-EVAL evaluation board manuals. + */ + /* Uncomment the following define to use an external pull up instead of the + integrated STM32L15xx internal pull up. In this case make sure to set up + correctly the external required hardware and the GPIO defines below.*/ +/* #define USB_USE_EXTERNAL_PULLUP */ + + #if !defined(USB_USE_EXTERNAL_PULLUP) + #define STM32L15_USB_CONNECT SYSCFG_USBPuCmd(ENABLE) + #define STM32L15_USB_DISCONNECT SYSCFG_USBPuCmd(DISABLE) + + #elif defined(USB_USE_EXTERNAL_PULLUP) + /* PA0 is chosen just as illustrating example, you should modify the defines + below according to your hardware configuration. */ + #define USB_DISCONNECT GPIOA + #define USB_DISCONNECT_PIN GPIO_Pin_0 + #define RCC_AHBPeriph_GPIO_DISCONNECT RCC_AHBPeriph_GPIOA + #define STM32L15_USB_CONNECT GPIO_ResetBits(USB_DISCONNECT, USB_DISCONNECT_PIN) + #define STM32L15_USB_DISCONNECT GPIO_SetBits(USB_DISCONNECT, USB_DISCONNECT_PIN) + #endif /* USB_USE_EXTERNAL_PULLUP */ + +#endif /* USE_STM3210B_EVAL */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +#endif /* __PLATFORM_CONFIG_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/stm32_it.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/stm32_it.h new file mode 100644 index 0000000..6bc6037 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/stm32_it.h @@ -0,0 +1,63 @@ +/** + ****************************************************************************** + * @file stm32_it.h + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32_IT_H +#define __STM32_IT_H + +/* Includes ------------------------------------------------------------------*/ +#include "platform_config.h" + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +void USB_HP_CAN1_TX_IRQHandler(void); +void USB_LP_CAN1_RX0_IRQHandler(void); +void USBWakeUp_IRQHandler(void); +void USB_FS_WKUP_IRQHandler(void); +#ifdef USE_STM3210B_EVAL +void TIM2_IRQHandler(void); +#endif /* USE_STM3210B_EVAL */ +#if defined (USE_STM3210E_EVAL) +void SPI2_IRQHandler(void); +#endif /* USE_STM3210E_EVAL */ + +#endif /* __STM32_IT_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/stm32f10x_conf.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/stm32f10x_conf.h new file mode 100644 index 0000000..e08299d --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/stm32f10x_conf.h @@ -0,0 +1,85 @@ +/** + ****************************************************************************** + * @file stm32f10x_conf.h + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Library configuration file. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F10x_CONF_H +#define __STM32F10x_CONF_H + +/* Includes ------------------------------------------------------------------*/ +/* Uncomment the line below to enable peripheral header file inclusion */ +#include "stm32f10x_adc.h" +#include "stm32f10x_bkp.h" +#include "stm32f10x_can.h" +#include "stm32f10x_crc.h" +#include "stm32f10x_dac.h" +#include "stm32f10x_dbgmcu.h" +#include "stm32f10x_dma.h" +#include "stm32f10x_exti.h" +#include "stm32f10x_flash.h" +#include "stm32f10x_fsmc.h" +#include "stm32f10x_gpio.h" +#include "stm32f10x_i2c.h" +#include "stm32f10x_iwdg.h" +#include "stm32f10x_pwr.h" +#include "stm32f10x_rcc.h" +#include "stm32f10x_rtc.h" +#include "stm32f10x_sdio.h" +#include "stm32f10x_spi.h" +#include "stm32f10x_tim.h" +#include "stm32f10x_usart.h" +#include "stm32f10x_wwdg.h" +#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Uncomment the line below to expanse the "assert_param" macro in the + Standard Peripheral Library drivers code */ +/* #define USE_FULL_ASSERT 1 */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT + +/******************************************************************************* +* Macro Name : assert_param +* Description : The assert_param macro is used for function's parameters check. +* Input : - expr: If expr is false, it calls assert_failed function +* which reports the name of the source file and the source +* line number of the call that failed. +* If expr is true, it returns no value. +* Return : None +*******************************************************************************/ + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ + +#endif /* __STM32F10x_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/usb_istr.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/usb_istr.h new file mode 100644 index 0000000..de6ca1c --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/usb_istr.h @@ -0,0 +1,93 @@ +/** + ****************************************************************************** + * @file usb_istr.h + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief This file includes the peripherals header files in the user application. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_ISTR_H +#define __USB_ISTR_H + +/* Includes ------------------------------------------------------------------*/ +#include "usb_conf.h" + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +void USB_Istr(void); +/* function prototypes Automatically built defining related macros */ + +#ifdef CTR_CALLBACK + void CTR_Callback(void); +#endif + +#ifdef DOVR_CALLBACK + void DOVR_Callback(void); +#endif + +#ifdef ERR_CALLBACK + void ERR_Callback(void); +#endif + +#ifdef WKUP_CALLBACK + void WKUP_Callback(void); +#endif + +#ifdef SUSP_CALLBACK + void SUSP_Callback(void); +#endif + +#ifdef RESET_CALLBACK + void RESET_Callback(void); +#endif + +#ifdef SOF_CALLBACK + void SOF_Callback(void); +#endif + +#ifdef ESOF_CALLBACK + void ESOF_Callback(void); +#endif + +void EP1_IN_Callback(void); +void EP2_IN_Callback(void); +void EP3_IN_Callback(void); +void EP4_IN_Callback(void); +void EP5_IN_Callback(void); +void EP6_IN_Callback(void); +void EP7_IN_Callback(void); + +void EP1_OUT_Callback(void); +void EP2_OUT_Callback(void); +void EP3_OUT_Callback(void); +void EP4_OUT_Callback(void); +void EP5_OUT_Callback(void); +void EP6_OUT_Callback(void); +void EP7_OUT_Callback(void); + +#endif /*__USB_ISTR_H*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/usb_pwr.h b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/usb_pwr.h new file mode 100644 index 0000000..af7873e --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/inc/usb_pwr.h @@ -0,0 +1,72 @@ +/** + ****************************************************************************** + * @file usb_pwr.h + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Connection/disconnection & power management header + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_PWR_H +#define __USB_PWR_H + +/* Includes ------------------------------------------------------------------*/ +/* Exported types ------------------------------------------------------------*/ +typedef enum _RESUME_STATE +{ + RESUME_EXTERNAL, + RESUME_INTERNAL, + RESUME_LATER, + RESUME_WAIT, + RESUME_START, + RESUME_ON, + RESUME_OFF, + RESUME_ESOF +} RESUME_STATE; + +typedef enum _DEVICE_STATE +{ + UNCONNECTED, + ATTACHED, + POWERED, + SUSPENDED, + ADDRESSED, + CONFIGURED +} DEVICE_STATE; + +/* Exported constants --------------------------------------------------------*/ +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ +void Suspend(void); +void Resume_Init(void); +void Resume(RESUME_STATE eResumeSetVal); +RESULT PowerOn(void); +RESULT PowerOff(void); + +/* External variables --------------------------------------------------------*/ +extern __IO uint32_t bDeviceState; /* USB device status */ +extern __IO bool fSuspendEnabled; /* true when suspend is possible */ + +#endif /*__USB_PWR_H*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/readme.txt b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/readme.txt new file mode 100644 index 0000000..044f814 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/readme.txt @@ -0,0 +1,148 @@ +/** + ****************************************************************************** + * @file readme.txt + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Description of the USB Audio_Speaker Demo. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +Example description +=================== +The USB-FS-Device Audio Speaker demo gives examples of how to use the STM32F10xxx +and STM32L15xxx USB-FS-Device peripheral to communicate with the PC host in the +isochronous transfer mode. +It provides a demonstration of the correct method for configuring an isochronous +endpoint, receiving or transmitting data from/to the host. + +More details about this Demo implementation is given in the User manual +"UM0424 STM32F10xxx USB development kit", available for download from the ST +microcontrollers website: www.st.com/stm32 + + +Directory contents +================== + + \inc: contains the Demo firmware header files + + \EWARM: contains preconfigured projects for EWARM toolchain + + \RIDE: contains preconfigured projects for RIDE toolchain + + \MDK-ARM: contains preconfigured projects for MDK-ARM toolchain + + \TASKING: contains preconfigured projects for TASKING toolchain + + \TrueSTUDIO: contains preconfigured projects for TrueSTUDIO toolchain + + \src: contains the Demo firmware source files + +Hardware environment +==================== +This example runs on STMicroelectronics STM3210B-EVAL, STM3210E-EVAL and +STM32L152-EVAL evaluation boards and can be easily tailored to any other hardware. +To select the STMicroelectronics evaluation board used to run the example, uncomment +the corresponding line in platform_config.h file. + + - STM3210B-EVAL Set-up + - Jumper JP1 (USB disconnect) should be connected in position 2-3. + - Jumper JP6 should be not connected. + + - STM3210E-EVAL Set-up + - Jumper JP14 (USB disconnect) should be connected in position 2-3. + - Jumper JP18 (MCKI) should be connected in position 2-3. + + - STM32L152-EVAL Set-up + - Jumper JP16 (Audio Out) should be not connected. + + +How to use it +============= + + EWARM + - Open the AudioSpeaker.eww workspace. + - In the workspace toolbar select the project config: + - STM3210B-EVAL: to configure the project for STM32 Medium-density devices + - STM3210E-EVAL: to configure the project for STM32 High-density devices + - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices + - STM32L152-EVAL: to configure the project for STM32 Medium-Density Low-Power devices + - Rebuild all files: Project->Rebuild all + - Load project image: Project->Debug + - Run program: Debug->Go(F5) + + + MDK-ARM + - Open the AudioSpeaker.Uv2 project + - In the build toolbar select the project config: + - STM3210B-EVAL: to configure the project for STM32 Medium-density devices + - STM3210E-EVAL: to configure the project for STM32 High-density devices + - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices + - STM32L152-EVAL: to configure the project for STM32 Medium-Density Low-Power devices + - Rebuild all files: Project->Rebuild all target files + - Load project image: Debug->Start/Stop Debug Session + - Run program: Debug->Run (F5) + + + RIDE + - Open the AudioSpeaker.rprj project. + - In the configuration toolbar(Project->properties) select the project config: + - STM3210B-EVAL: to configure the project for STM32 Medium-density devices + - STM3210E-EVAL: to configure the project for STM32 High-density devices + - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices + - STM32L152-EVAL: to configure the project for STM32 Medium-Density Low-Power devices + - Rebuild all files: Project->build project + - Load project image: Debug->start(ctrl+D) + - Run program: Debug->Run(ctrl+F9) + + + TASKING + - Open TASKING toolchain. + - Click on File->Import, select General->'Existing Projects into Workspace' + and then click "Next". + - Browse to TASKING workspace directory and select the project: + - under STM32F10B_EVAL directory: to select the project for STM32 Medium-density devices. + - under STM32F10E_EVAL directory: to select the project for STM32 High-density devices + - under STM32F10E_EVAL_XL directory: to select the project for STM32 XL-density devices + - under STM32L152_EVAL directory: to select the project for STM32 Medium-Density Low-Power devices + - Rebuild all project files: Select the project in the "Project explorer" + window then click on Project->build project menu. + - Run program: Select the project in the "Project explorer" window then click + Run->Debug (F11) + + + TrueSTUDIO + - Open the TrueSTUDIO toolchain. + - Click on File->Switch Workspace->Other and browse to TrueSTUDIO workspace + directory. + - Click on File->Import, select General->'Existing Projects into Workspace' + and then click "Next". + - Browse to the TrueSTUDIO workspace directory and select project: + - STM3210B-EVAL: to load the project for STM32 Medium-density devices + - STM3210E-EVAL: to load the project for STM32 High-density devices + - STM3210E_EVAL_XL: to load the project for STM32 XL-density devices + - STM32L152_EVAL: to load the project for STM32 Medium-Density Low-Power devices + - Rebuild all project files: Select the project in the "Project explorer" + window then click on Project->'build project' menu. + - Run program: Select the project in the "Project explorer" window then click + Run->Debug (F11) + +NOTE: + - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. + - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. + - High-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 512 and 1024 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + - Medium-density Low-Power devices are STM32L15xx microcontrollers where the flash + memory density ranges between 64 and 128 Kbytes. +************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****** diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/hw_config.c b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/hw_config.c new file mode 100644 index 0000000..74eb8ed --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/hw_config.c @@ -0,0 +1,461 @@ +/** + ****************************************************************************** + * @file hw_config.c + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Hardware Configuration & Setup + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Includes ------------------------------------------------------------------*/ +#include "hw_config.h" +#include "stm32_it.h" +#include "usb_lib.h" +#include "usb_desc.h" +#include "usb_pwr.h" +#include "usb_prop.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define TIM2ARRValue 3273 /* 22KHz = 72MHz / 3273 */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +ErrorStatus HSEStartUpStatus; +EXTI_InitTypeDef EXTI_InitStructure; + +/* Extern variables ----------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +static void IntToUnicode (uint32_t value , uint8_t *pbuf , uint8_t len); +/* Private functions ---------------------------------------------------------*/ + +/******************************************************************************* +* Function Name : Set_System +* Description : Configures Main system clocks & power +* Input : None. +* Return : None. +*******************************************************************************/ +void Set_System(void) +{ +#if !defined(STM32L1XX_MD) + GPIO_InitTypeDef GPIO_InitStructure; +#endif /* STM32L1XX_MD */ +#if defined(USB_USE_EXTERNAL_PULLUP) + GPIO_InitTypeDef GPIO_InitStructure; +#endif /* USB_USE_EXTERNAL_PULLUP */ + + /*!< At this stage the microcontroller clock setting is already configured, + this is done through SystemInit() function which is called from startup + file (startup_stm32xxx.s) before to branch to application main. + To reconfigure the default setting of SystemInit() function, refer to + system_stm32xxx.c file + */ + +#ifdef STM32L1XX_MD + /* Enable the SYSCFG module clock */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE); +#endif /* STM32L1XX_MD */ + +#ifdef USE_STM3210B_EVAL + /* Enable GPIOB, TIM2 & TIM4 clock */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB , ENABLE); + RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2 | RCC_APB1Periph_TIM4 , ENABLE); +#endif /* USE_STM3210B_EVAL */ + +#if !defined(STM32L1XX_MD) + /* Configure USB pull-up */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIO_DISCONNECT, ENABLE); + + /* Configure USB pull-up */ + GPIO_InitStructure.GPIO_Pin = USB_DISCONNECT_PIN; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD; + GPIO_Init(USB_DISCONNECT, &GPIO_InitStructure); +#endif /* STM32L1XX_MD */ + +#if defined(USB_USE_EXTERNAL_PULLUP) + /* Enable the USB disconnect GPIO clock */ + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIO_DISCONNECT, ENABLE); + + /* USB_DISCONNECT used as USB pull-up */ + GPIO_InitStructure.GPIO_Pin = USB_DISCONNECT_PIN; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; + GPIO_InitStructure.GPIO_OType = GPIO_OType_PP; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL; + GPIO_Init(USB_DISCONNECT, &GPIO_InitStructure); +#endif /* USB_USE_EXTERNAL_PULLUP */ + + USB_Cable_Config(DISABLE); + + USB_Cable_Config(ENABLE); + + /* Configure the EXTI line 18 connected internally to the USB IP */ + EXTI_ClearITPendingBit(EXTI_Line18); + EXTI_InitStructure.EXTI_Line = EXTI_Line18; + EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; + EXTI_InitStructure.EXTI_LineCmd = ENABLE; + EXTI_Init(&EXTI_InitStructure); +} + +/******************************************************************************* +* Function Name : Set_USBClock +* Description : Configures USB Clock input (48MHz) +* Input : None. +* Return : None. +*******************************************************************************/ +void Set_USBClock(void) +{ +#ifdef STM32L1XX_MD + /* Enable USB clock */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USB, ENABLE); + +#else + /* Select USBCLK source */ + RCC_USBCLKConfig(RCC_USBCLKSource_PLLCLK_1Div5); + + /* Enable the USB clock */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USB, ENABLE); +#endif /* STM32L1XX_MD */ +} + +/******************************************************************************* +* Function Name : Enter_LowPowerMode +* Description : Power-off system clocks and power while entering suspend mode +* Input : None. +* Return : None. +*******************************************************************************/ +void Enter_LowPowerMode(void) +{ + /* Set the device state to suspend */ + bDeviceState = SUSPENDED; +} + +/******************************************************************************* +* Function Name : Leave_LowPowerMode +* Description : Restores system clocks and power while exiting suspend mode +* Input : None. +* Return : None. +*******************************************************************************/ +void Leave_LowPowerMode(void) +{ + DEVICE_INFO *pInfo = &Device_Info; + + /* Set the device state to the correct state */ + if (pInfo->Current_Configuration != 0) + { + /* Device configured */ + bDeviceState = CONFIGURED; + } + else + { + bDeviceState = ATTACHED; + } + /*Enable SystemCoreClock*/ + SystemInit(); +} + +/******************************************************************************* +* Function Name : USB_Interrupts_Config +* Description : Configures the USB interrupts +* Input : None. +* Return : None. +*******************************************************************************/ +void USB_Config(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2); + +#ifdef STM32L1XX_MD + NVIC_InitStructure.NVIC_IRQChannel = USB_LP_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); + + /* Enable and configure the priority of the USB_HP IRQ Channel*/ + NVIC_InitStructure.NVIC_IRQChannel = USB_HP_IRQn; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; + NVIC_Init(&NVIC_InitStructure); + + /* Enable the USB Wake-up interrupt */ + NVIC_InitStructure.NVIC_IRQChannel = USB_FS_WKUP_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); + +#else /* USE_STM3210B_EVAL or USE_STM3210E_EVAL */ + + /* Enable and configure the priority of the USB_LP IRQ Channel*/ + NVIC_InitStructure.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); + + /* Enable and configure the priority of the USB_HP IRQ Channel*/ + NVIC_InitStructure.NVIC_IRQChannel = USB_HP_CAN1_TX_IRQn; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; + + /* Enable the USB Wake-up interrupt */ + NVIC_InitStructure.NVIC_IRQChannel = USBWakeUp_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; + NVIC_Init(&NVIC_InitStructure); + +#endif /* STM32L1XX_MD */ + + /* Audio Components Interrupt configuration */ + Audio_Config(); +} +/******************************************************************************* +* Function Name : USB_Interrupts_Config +* Description : Configures the USB interrupts +* Input : None. +* Return : None. +*******************************************************************************/ +void Audio_Config(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + +#if defined(USE_STM32L152_EVAL) + /* Enable the TIM2 Interrupt */ + NVIC_InitStructure.NVIC_IRQChannel = TIM6_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); + +#elif defined(USE_STM3210B_EVAL) + /* Enable the TIM2 Interrupt */ + NVIC_InitStructure.NVIC_IRQChannel = TIM2_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); + +#elif defined(USE_STM3210E_EVAL) + /* SPI2 IRQ Channel configuration */ + NVIC_InitStructure.NVIC_IRQChannel = SPI2_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +#endif /* USE_STM3210B_EVAL */ +} +/******************************************************************************* +* Function Name : USB_Cable_Config +* Description : Software Connection/Disconnection of USB Cable +* Input : None. +* Return : Status +*******************************************************************************/ +void USB_Cable_Config (FunctionalState NewState) +{ +#ifdef STM32L1XX_MD + if (NewState != DISABLE) + { + STM32L15_USB_CONNECT; + } + else + { + STM32L15_USB_DISCONNECT; + } + +#else + if (NewState != DISABLE) + { + GPIO_ResetBits(USB_DISCONNECT, USB_DISCONNECT_PIN); + } + else + { + GPIO_SetBits(USB_DISCONNECT, USB_DISCONNECT_PIN); + } +#endif /* STM32L1XX_MD */ +} + +/******************************************************************************* +* Function Name : Speaker_Timer_Config +* Description : Configure and enable the timer +* Input : None. +* Return : None. +*******************************************************************************/ +void Speaker_Config(void) +{ +#ifdef USE_STM32L152_EVAL + DAC_InitTypeDef DAC_InitStructure; + GPIO_InitTypeDef GPIO_InitStructure; + uint16_t TIM6ARRValue = 4000; + + /* TIM6 and DAC clocks enable */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM6 | RCC_APB1Periph_DAC, ENABLE); + + /* Enable GPIOA clock */ + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE); + + /* Configure DAC Channel1 and Channel2 as output */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4 | GPIO_Pin_5; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_40MHz; + GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN; + GPIO_Init(GPIOA, &GPIO_InitStructure); + + /* TIM6 Configuration */ + TIM_DeInit(TIM6); + + TIM6ARRValue = (uint32_t)(SystemCoreClock/22000); /* Audio Sample Rate = 22KHz */ + + /* Set the timer auto reload value dependent on the audio frequency */ + TIM_SetAutoreload(TIM6, TIM6ARRValue); /* 22.KHz = 32MHz / 1454 */ + + /* TIM6 TRGO selection */ + TIM_SelectOutputTrigger(TIM6, TIM_TRGOSource_Update); + + /* Enable TIM6 update interrupt */ + TIM_ITConfig(TIM6, TIM_IT_Update, ENABLE); + + /* DAC deinitialize */ + DAC_DeInit(); + DAC_StructInit(&DAC_InitStructure); + + /* Fill DAC InitStructure */ + DAC_InitStructure.DAC_Trigger = DAC_Trigger_T6_TRGO; + DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None; + DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Disable; + +/* DAC Channel1: 8bit right---------------------------------------------------*/ + /* DAC Channel1 Init */ + DAC_Init(DAC_Channel_1, &DAC_InitStructure); + + /* Enable DAC Channel1 */ + DAC_Cmd(DAC_Channel_1, ENABLE); + + /* Start TIM6 */ + TIM_Cmd(TIM6, ENABLE); + +#elif defined(USE_STM3210B_EVAL) + GPIO_InitTypeDef GPIO_InitStructure; + TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; + TIM_OCInitTypeDef TIM_OCInitStructure; + + /* Configure PB.08 as alternate function (TIM4_OC3) */ + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_Init(GPIOB, &GPIO_InitStructure); + + /* TIM4 configuration */ + TIM_TimeBaseStructure.TIM_Prescaler = 0x00; /* TIM4CLK = 72 MHz */ + TIM_TimeBaseStructure.TIM_Period = 0xFF; /* PWM frequency : 281.250KHz*/ + TIM_TimeBaseStructure.TIM_ClockDivision = 0x0; + TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; + TIM_TimeBaseInit(TIM4, &TIM_TimeBaseStructure); + /* TIM4's Channel3 in PWM1 mode */ + TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1; + TIM_OCInitStructure.TIM_Pulse = 0x7F; /* Duty cycle: 50%*/ + TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High; /* set high polarity */ + TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable; + TIM_OC3Init(TIM4, &TIM_OCInitStructure); + TIM_OC3PreloadConfig(TIM4, TIM_OCPreload_Enable); + + /* TIM2 configuration */ + TIM_TimeBaseStructure.TIM_Period = TIM2ARRValue; + TIM_TimeBaseStructure.TIM_Prescaler = 0x00; /* TIM2CLK = 72 MHz */ + TIM_TimeBaseStructure.TIM_ClockDivision = 0x0; + TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; + TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure); + /* Output Compare Inactive Mode configuration: Channel1 */ + TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_Timing; + TIM_OCInitStructure.TIM_Pulse = 0x0; + TIM_OC1Init(TIM2, &TIM_OCInitStructure); + TIM_OC1PreloadConfig(TIM2, TIM_OCPreload_Disable); + + /* Start TIM4 */ + TIM_Cmd(TIM4, ENABLE); + + /* Start TIM2 */ + TIM_Cmd(TIM2, ENABLE); + + /* Enable TIM2 update interrupt */ + TIM_ITConfig(TIM2, TIM_IT_Update, ENABLE); + +#else + /* Configure the initialization parameters */ + I2S_GPIO_Config(); + I2S_Config(I2S_Standard_Phillips, I2S_MCLKOutput_Enable, I2S_AudioFreq_22k); + CODEC_Config(OutputDevice_SPEAKER, I2S_Standard_Phillips, I2S_MCLKOutput_Enable, 0x08); + SPI_I2S_ITConfig(SPI2, SPI_I2S_IT_TXE, ENABLE); + +#endif +} + +/******************************************************************************* +* Function Name : Get_SerialNum. +* Description : Create the serial number string descriptor. +* Input : None. +* Output : None. +* Return : None. +*******************************************************************************/ +void Get_SerialNum(void) +{ + uint32_t Device_Serial0, Device_Serial1, Device_Serial2; + + Device_Serial0 = *(uint32_t*)ID1; + Device_Serial1 = *(uint32_t*)ID2; + Device_Serial2 = *(uint32_t*)ID3; + + Device_Serial0 += Device_Serial2; + + if (Device_Serial0 != 0) + { + IntToUnicode (Device_Serial0, &Speaker_StringSerial[2] , 8); + IntToUnicode (Device_Serial1, &Speaker_StringSerial[18], 4); + } +} + +/******************************************************************************* +* Function Name : HexToChar. +* Description : Convert Hex 32Bits value into char. +* Input : None. +* Output : None. +* Return : None. +*******************************************************************************/ +static void IntToUnicode (uint32_t value , uint8_t *pbuf , uint8_t len) +{ + uint8_t idx = 0; + + for( idx = 0 ; idx < len ; idx ++) + { + if( ((value >> 28)) < 0xA ) + { + pbuf[ 2* idx] = (value >> 28) + '0'; + } + else + { + pbuf[2* idx] = (value >> 28) + 'A' - 10; + } + + value = value << 4; + + pbuf[ 2* idx + 1] = 0; + } +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/i2s_codec.c b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/i2s_codec.c new file mode 100644 index 0000000..6dd4168 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/i2s_codec.c @@ -0,0 +1,1573 @@ +/** + ****************************************************************************** + * @file i2s_codec.c + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief This file includes the I2S Codec driver for AK4343 Audio Codec. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +#include "platform_config.h" +#ifdef USE_STM3210E_EVAL +/* Includes ------------------------------------------------------------------*/ + +#include "i2s_codec.h" + +/* Private typedef -----------------------------------------------------------*/ +typedef enum +{ + LittleEndian, + BigEndian +}Endianness; + +/* Private define ------------------------------------------------------------*/ + +/* Audio file header size */ +#define HEADER_SIZE 100 + +/* EvalBoard pins related to the Codec */ +#define Codec_PDN_GPIO GPIOG +#define Codec_PDN_Pin GPIO_Pin_11 + +/* Uncomment this line to enable verifying data sent to codec after each write operation */ +//#define VERIFY_WRITTENDATA + +/* The 7 bits Codec address mask */ +#define CODEC_ADDRESS 0x27 /* b00100111 */ + +/* Audio Parsing Constants */ +#define ChunkID 0x52494646 /* correspond to the letters 'RIFF' */ +#define FileFormat 0x57415645 /* correspond to the letters 'WAVE' */ +#define FormatID 0x666D7420 /* correspond to the letters 'fmt ' */ +#define DataID 0x64617461 /* correspond to the letters 'data' */ +#define FactID 0x66616374 /* correspond to the letters 'fact' */ + +#define WAVE_FORMAT_PCM 0x01 +#define FormatChunkSize 0x10 +#define Channel_MONO 0x01 +#define Channel_STEREO 0x02 + +#define SampleRate_8000 8000 +#define SampleRate_16000 16000 +#define SampleRate_22050 22050 +#define SampleRate_44100 44100 +#define SampleRate_48000 48000 +#define Bits_Per_Sample_8 8 +#define Bits_Per_Sample_16 16 + +#define DUMMY_DATA 0x1111 +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Audio Frequency value */ +uint16_t i2saudiofreq = I2S_AudioFreq_8k; + +/* Header Table containing the audio file information */ +uint8_t HeaderTabIndex = 0; +uint8_t AudioFileHeader[HEADER_SIZE]; + +/* Audio Codec variables */ +__IO uint32_t AudioFileAddress = 0x0; +uint32_t AudioDataLength = 0;//7000000; +uint32_t DataStartAddr = 0x0; +__IO uint32_t AudioDataIndex = 0; +static __IO uint32_t AudioReplay = 0xFFFF; +static uint32_t AudioReplayCount = 0xFFFF; +static __IO uint32_t SendDummyData = 0; +static __IO uint32_t AudioPlayStatus = AudioPlayStatus_STOPPED; +static uint32_t CurrentOutputDevice = OutputDevice_HEADPHONE; +static uint8_t CurrentVolume = DEFAULT_VOL; +static uint32_t errorcode = 0xFF; +static __IO uint32_t monovar = 0, tmpvar = 0; + +/* Wave details names table */ +WAVE_FormatTypeDef WAVE_Format; +__IO ErrorCode WaveFileStatus = Unvalid_RIFF_ID; + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +static void NVIC_Config(void); +static void I2C_Config(void); +static uint32_t CODEC_WriteRegister(uint32_t RegisterAddr, uint32_t RegisterValue); +static uint32_t CODEC_ReadRegister(uint32_t RegisterAddr); +static uint32_t ReadUnit(uint8_t NbrOfBytes, Endianness BytesFormat); +uint32_t AudioFile_Init(void); + +/******************************************************************************* +* Function Name : I2S_CODEC_Init +* Description : Initializes the I2S audio codec according parameters configured +* by I2S_CODEC_Config function. +* Input : - OutputDevice: Could be OutoutDevice_SPEAKER or +* OutoutDevice_HEADPHONE. +* - Address: Specifies the location of the audio file in the memory. +* Output : None +* Return : - 0: if all initializations are OK. +* - 1: if memory initialization failed (LD2 is turned on). +* - 2: if audio file initialization failed (LD2 is turned on). +* - 3: if Codec initialization failed (LD1 is turned on). +*******************************************************************************/ +uint32_t I2S_CODEC_Init(uint32_t OutputDevice, uint32_t Address) +{ + uint32_t count = 0; + + /* Set the audio file address */ + AudioFileAddress = (uint32_t) Address; + + /* Configure I2S interrupt Channel */ + NVIC_Config(); + + /* Configure the I2S2, I2C1 and GPIOF pins */ + I2S_GPIO_Config(); + + /* Read the Audio file to extract the audio data length and frequency */ + errorcode = AudioFile_Init(); + + if (errorcode < 3) + { + /* Turn on LD2 connected to PF.07 */ + GPIO_SetBits(GPIOF, GPIO_Pin_7); + + return errorcode; + } + + /* Configure the SPI2 peripheral in I2S mode */ + I2S_Config(I2S_STANDARD, I2S_MCLKOUTPUT, i2saudiofreq); + + /* Set the current output device */ + CurrentOutputDevice = OutputDevice; + + /* Codec Configuration via I2C interface */ + count = CODEC_Config(OutputDevice, I2S_STANDARD, I2S_MCLKOUTPUT, DEFAULT_VOL); + + if (count != 0) + { + /* Turn on LD1 connected to PF.06 */ + GPIO_SetBits(GPIOF, GPIO_Pin_6); + + return 3; + } + + /* Turn on LD4 connected to PF.09 */ + GPIO_SetBits(GPIOF, GPIO_Pin_9); + + return 0; /* Configuration is OK */ +} + +/******************************************************************************* +* Function Name : I2S_CODEC_ReplayConfig +* Description : Set AudioReplay variable value . +* Input : Repetions: Number of repetitions +* Output : None +* Return : None +*******************************************************************************/ +void I2S_CODEC_ReplayConfig(uint32_t Repetions) +{ + /* Audio Replay number set by user */ + AudioReplay = Repetions; + + /* Audio Replays number remaining (if AudioReplay != 0) */ + AudioReplayCount = Repetions; +} + +/******************************************************************************* +* Function Name : I2S_CODEC_Play +* Description : Plays the audio file. +* Input : - AudioStartPosition: Address from which the wave data begin +* Output : None +* Return : AudioDataIndex value. +*******************************************************************************/ +uint32_t I2S_CODEC_Play(uint32_t AudioStartPosition) +{ + /* Send the read command to the media */ + Media_StartReadSequence(AudioFileAddress + AudioStartPosition + 1); + + /* Set Playing status to inform other modules about the codec status */ + SetVar_AudioPlayStatus(AudioPlayStatus_PLAYING); + + /* Enable the I2S2 TXE Interrupt => Generate the clocks*/ + SPI_I2S_ITConfig(SPI2, SPI_I2S_IT_TXE, ENABLE); + + return AudioDataIndex; +} + +/******************************************************************************* +* Function Name : I2S_CODEC_Pause +* Description : Pause playing the audio file. +* Input : None +* Output : None +* Return : Current Position. +*******************************************************************************/ +uint32_t I2S_CODEC_Pause() +{ + /* Disable the I2S2 TXE Interrupt => stop the clocks*/ + SPI_I2S_ITConfig(SPI2, SPI_I2S_IT_TXE, DISABLE); + + /* Set Paused status to inform other modules about the codec status */ + SetVar_AudioPlayStatus(AudioPlayStatus_PAUSED); + + /* Reset local variables */ + monovar = 0; + tmpvar = 0; + + if (WAVE_Format.NumChannels == Channel_MONO) + { + /* Force the parity of the address */ + AudioDataIndex &= 0xFFFFFFFE; + } + /* Return the current data pointer position */ + return AudioDataIndex; +} + +/******************************************************************************* +* Function Name : I2S_CODEC_Stop +* Description : Stop playing the audio file, reset the pointer and power off +* : the Codec. +* Input : None +* Output : None +* Return : 0 if operation complete. +*******************************************************************************/ +uint32_t I2S_CODEC_Stop() +{ + /* Disable the I2S2 TXE Interrupt => stop the clocks */ + SPI_I2S_ITConfig(SPI2, SPI_I2S_IT_TXE, DISABLE); + + /* Reinitialize the audio data pointer */ + AudioDataIndex = 0; + + /* Power off the Codec to save power and protect the Codec itself */ + I2S_CODEC_PowerDown(CodecPowerDown_SW); + + /* Set Paused status to inform other modules about the codec status */ + SetVar_AudioPlayStatus(AudioPlayStatus_STOPPED); + + /* Reset local variables */ + monovar = 0; + tmpvar = 0; + + return 0; +} + +/******************************************************************************* +* Function Name : I2S_CODEC_ControlVolume +* Description : Controls the audio volume. +* Input : - direction: VolumeDirection_HIGH (0xF) to increase the volume, +* : VolumeDirection_LOW (0xA) to decrease the volume or +* : VolumeDirection_LEVEL (0x0) to set a defined level of volume. +* : - Volume: the step of volume increasing/decreasing (when direction == 0) +* : or the volume level to be set (when direction != 0). +* Output : None +* Return : 0-> correct communication, else wrong communication +*******************************************************************************/ +uint32_t I2S_CODEC_ControlVolume(uint32_t direction, uint8_t Volume) +{ + uint32_t counter = 0; + + if (direction == VolumeDirection_HIGH) + { + /* Check if the volume high limit is reached */ + if (CurrentVolume < VOLStep) + { + CurrentVolume = 0; + } + else + { + /* Save the current volume level */ + CurrentVolume = CODEC_ReadRegister(0x0A) - Volume; + } + + /* Set the new volume */ + counter += CODEC_WriteRegister(0x0A, CurrentVolume); + } + else if (direction == VolumeDirection_LOW) + { + /* Check if the volume low limit is reached */ + if (CurrentVolume > (0xFF - VOLStep)) + { + CurrentVolume = 0xFF; + } + else + { + /* Save the current volume level */ + CurrentVolume = CODEC_ReadRegister(0x0A) + Volume; + } + + /* Set the new volume */ + counter += CODEC_WriteRegister(0x0A, CurrentVolume); + } + else if (direction == VolumeDirection_LEVEL) + { + CurrentVolume = Volume; + + /* Set the new volume */ + counter += CODEC_WriteRegister(0x0A, Volume); + } + else + { + return 0xFF; //Error verifying the Codec registers + } + + return counter; +} + +/******************************************************************************* +* Function Name : I2S_CODEC_Mute +* Description : Enable or disable the MUTE mode by software +* Input : - Command: could be MUTEON to mute sound or MUTEOFF to restore volume +* Output : None. +* Return : None. +*******************************************************************************/ +void I2S_CODEC_Mute(uint32_t Command) +{ + uint32_t tmp = 0; + + /* Read the current value of the config register number 0x0E */ + tmp = CODEC_ReadRegister(0x0E); + + /* Set the Mute mode */ + if (Command == MUTE_ON) + { + tmp |= 0x20; + } + else /* MUTE_OFF Disable the Mute */ + { + tmp &= 0xD1; + } + + /* Write back the CODEC config register w/the new value */ + CODEC_WriteRegister(0x0E, tmp); +} + +/******************************************************************************* +* Function Name : I2S_CODEC_ForwardPlay +* Description : Forward function. +* Input : - Step: number of steps forward +* Output : None. +* Return : None. +*******************************************************************************/ +void I2S_CODEC_ForwardPlay(uint32_t Step) +{ + /* Pause Playing the audio file */ + I2S_CODEC_Pause(); + + /* Increment the Audio pointer */ + IncrementVar_AudioDataIndex((AudioDataLength / 100) * Step); + + /* Insure the index parity */ + AudioDataIndex &= 0xFFFFFFFE; + + /* Resume playing from the new position */ + I2S_CODEC_Play((GetVar_AudioDataIndex())); +} + +/******************************************************************************* +* Function Name : I2S_CODEC_RewindPlay +* Description : Rewind function. +* Input : - Step: number of steps back +* Output : None. +* Return : None. +*******************************************************************************/ +void I2S_CODEC_RewindPlay(uint32_t Step) +{ + /* Pause Playing the audio file */ + I2S_CODEC_Pause(); + + /* Increment the Audio pointer */ + DecrementVar_AudioDataIndex((AudioDataLength / 100) * Step); + + /* Insure the index parity */ + AudioDataIndex &= 0xFFFFFFFE; + + /* Resume playing from the new position */ + I2S_CODEC_Play((GetVar_AudioDataIndex())); +} + +/******************************************************************************* +* Function Name : I2S_CODEC_PowerDown +* Description : Power down the Audio Codec. +* Input : - CodecPowerDown_Mode: could be CodecPowerDown_SW for power down +* : after communication, CodecPowerDown_HW simply shut down the codec +* Output : None +* Return : None +*******************************************************************************/ +void I2S_CODEC_PowerDown(uint32_t CodecPowerDown_Mode) +{ + if (CodecPowerDown_Mode == CodecPowerDown_SW) + { + /* Power down the DAC and the speaker (PMDAC and PMSPK bits)*/ + (void)CODEC_WriteRegister(0x00, 0x40); + /* Power down the VCOM*/ + (void)CODEC_WriteRegister(0x00, 0x00); + } + else /* CodecPowerDown_HW */ + { + /* Power Down the Codec */ + GPIO_ResetBits(Codec_PDN_GPIO, Codec_PDN_Pin); + } +} + +/******************************************************************************* +* Function Name : I2S_CODEC_Reset +* Description : Reset the Audio Codec. +* Input : None. +* Output : None. +* Return : None. +*******************************************************************************/ +void I2S_CODEC_Reset(void) +{ + /* Power Down the Codec */ + GPIO_ResetBits(Codec_PDN_GPIO, Codec_PDN_Pin); + + /* wait for a delay to allow registers erasing */ + delay(0xFF); + + /* Power On the Codec after the power off => all registers are reinitialized*/ + GPIO_SetBits(Codec_PDN_GPIO, Codec_PDN_Pin); + +} + +/******************************************************************************* +* Function Name : I2S_CODEC_SpeakerHeadphoneSwap +* Description : Configure the Audio Codec output to Speaker or Headphone while +* : the audio wave is Paused or stopped. +* Input : - OutputDevice: could be OutputDevice_Speaker or OutputDevice_Headphone +* or OutputDevice_Both . +* - Address: Specifies the audio file location in the memory. +* Output : None. +* Return : - 0: Operation done without failures. +* - 1: Memory failure occur. +* - 2: Audio file initialization failure occur +* - 3: I2C communication failure occur +*******************************************************************************/ +uint32_t I2S_CODEC_SpeakerHeadphoneSwap(uint32_t OutputDevice, uint32_t Address) +{ + uint32_t tmp_pointer = 0, err = 0; + + /* Reset all Codec Registers */ + I2S_CODEC_Reset(); + + /* Save the current position */ + tmp_pointer = GetVar_AudioDataIndex(); + + /* Reinitialize the CODEC with the new configured parameters */ + err = I2S_CODEC_Init(OutputDevice, Address); + + if (err != 0) + { + return err; + } + + /* Restore the last pointer position */ + AudioDataIndex = tmp_pointer; + + /* Restore the last volume level */ + I2S_CODEC_ControlVolume(VolumeDirection_LEVEL, CurrentVolume); + + /* Play from current position */ + I2S_CODEC_Play(tmp_pointer); + + return 0; +} + +/******************************************************************************* +* Function Name : I2S_CODEC_UpdateStatus +* Description : Check if STOP or PAUSE command are generated and performs the +* : relative action (STOP or PAUSE playing) +* Input : None. +* Output : None. +* Return : None. +*******************************************************************************/ +void I2S_CODEC_UpdateStatus(void) +{ + /* STOP command is generated => Stop playing the audio file */ + if ((GetVar_AudioPlayStatus() == AudioPlayStatus_STOPPED) && (SPI_I2S_GetFlagStatus(SPI2, I2S_FLAG_CHSIDE) == SET)) + { + I2S_CODEC_Stop(); + } + + /* PAUSE Command is generated => PAUSE playing the audio File */ + if ((GetVar_AudioPlayStatus() == AudioPlayStatus_PAUSED) && (SPI_I2S_GetFlagStatus(SPI2, I2S_FLAG_CHSIDE) == SET)) + { + I2S_CODEC_Pause(); + } +} + +/******************************************************************************* +* Function Name : GetVar_DataStartAddr +* Description : returns DataStartAddr variable value (used by stm32f10x_it.c file). +* Input : None +* Output : None +* Return : AudioDataIndex +*******************************************************************************/ +uint32_t GetVar_DataStartAddr(void) +{ + return DataStartAddr; +} + + +/******************************************************************************* +* Function Name : GetVar_CurrentVolume +* Description : returns CurrentVolume variable value (used by extern files). +* Input : None +* Output : None +* Return : CurrentVolume +*******************************************************************************/ +uint8_t GetVar_CurrentVolume(void) +{ + return CurrentVolume; +} + +/******************************************************************************* +* Function Name : I2S_CODEC_WaveParsing +* Description : Checks the format of the .WAV file and gets information about +* the audio format. This is done by reading the value of a +* number of parameters stored in the file header and comparing +* these to the values expected authenticates the format of a +* standard .WAV file (44 bytes will be read). If it is a valid +* .WAV file format, it continues reading the header to determine +* the audio format such as the sample rate and the sampled data +* size. If the audio format is supported by this application, +* it retrieves the audio format in WAVE_Format structure and +* returns a zero value. Otherwise the function fails and the +* return value is nonzero.In this case, the return value specifies +* the cause of the function fails. The error codes that can be +* returned by this function are declared in the header file. +* Input : None +* Output : None +* Return : Zero value if the function succeed, otherwise it return +* a nonzero value which specifies the error code. +*******************************************************************************/ +ErrorCode I2S_CODEC_WaveParsing(uint8_t* HeaderTab) +{ + uint32_t Temp = 0x00; + uint32_t ExtraFormatBytes = 0; + + /* Initialize the HeaderTabIndex variable */ + HeaderTabIndex = 0; + + /* Read chunkID, must be 'RIFF' ----------------------------------------------*/ + Temp = ReadUnit(4, BigEndian); + if (Temp != ChunkID) + { + return(Unvalid_RIFF_ID); + } + /* Read the file length ----------------------------------------------------*/ + WAVE_Format.RIFFchunksize = ReadUnit(4, LittleEndian); + + /* Read the file format, must be 'WAVE' ------------------------------------*/ + Temp = ReadUnit(4, BigEndian); + if (Temp != FileFormat) + { + return(Unvalid_WAVE_Format); + } + /* Read the format chunk, must be 'fmt ' -----------------------------------*/ + Temp = ReadUnit(4, BigEndian); + if (Temp != FormatID) + { + return(Unvalid_FormatChunk_ID); + } + /* Read the length of the 'fmt' data, must be 0x10 -------------------------*/ + Temp = ReadUnit(4, LittleEndian); + if (Temp != 0x10) + { + ExtraFormatBytes = 1; + } + /* Read the audio format, must be 0x01 (PCM) -------------------------------*/ + WAVE_Format.FormatTag = ReadUnit(2, LittleEndian); + if (WAVE_Format.FormatTag != WAVE_FORMAT_PCM) + { + return(Unsupporetd_FormatTag); + } + /* Read the number of channels: 0x02->Stereo 0x01->Mono --------------------*/ + WAVE_Format.NumChannels = ReadUnit(2, LittleEndian); + + /* Read the Sample Rate ----------------------------------------------------*/ + WAVE_Format.SampleRate = ReadUnit(4, LittleEndian); + + /* Update the I2S_AudioFreq value according to the .WAV file Sample Rate */ + switch (WAVE_Format.SampleRate) + { + case SampleRate_8000 : + i2saudiofreq = I2S_AudioFreq_8k; + break; + case SampleRate_16000: + i2saudiofreq = I2S_AudioFreq_16k; + break; + case SampleRate_22050: + i2saudiofreq = I2S_AudioFreq_22k; + break; + case SampleRate_44100: + i2saudiofreq = I2S_AudioFreq_44k; + break; + case SampleRate_48000: + i2saudiofreq = I2S_AudioFreq_48k; + break; + default: + return(Unsupporetd_Sample_Rate); + } + /* Read the Byte Rate ------------------------------------------------------*/ + WAVE_Format.ByteRate = ReadUnit(4, LittleEndian); + + /* Read the block alignment ------------------------------------------------*/ + WAVE_Format.BlockAlign = ReadUnit(2, LittleEndian); + + /* Read the number of bits per sample --------------------------------------*/ + WAVE_Format.BitsPerSample = ReadUnit(2, LittleEndian); + if (WAVE_Format.BitsPerSample != Bits_Per_Sample_16) + { + return(Unsupporetd_Bits_Per_Sample); + } + /* If there are Extra format bytes, these bytes will be defined in "Fact Chunk" */ + if (ExtraFormatBytes == 1) + { + /* Read th Extra format bytes, must be 0x00 ------------------------------*/ + Temp = ReadUnit(2, LittleEndian); + if (Temp != 0x00) + { + return(Unsupporetd_ExtraFormatBytes); + } + /* Read the Fact chunk, must be 'fact' -----------------------------------*/ + Temp = ReadUnit(4, BigEndian); + if (Temp != FactID) + { + return(Unvalid_FactChunk_ID); + } + /* Read Fact chunk data Size ---------------------------------------------*/ + Temp = ReadUnit(4, LittleEndian); + + /* Set the index to start reading just after the header end */ + HeaderTabIndex += Temp; + } + /* Read the Data chunk, must be 'data' -------------------------------------*/ + Temp = ReadUnit(4, BigEndian); + if (Temp != DataID) + { + return(Unvalid_DataChunk_ID); + } + /* Read the number of sample data ------------------------------------------*/ + WAVE_Format.DataSize = ReadUnit(4, LittleEndian); + + /* Set the data pointer at the beginning of the effective audio data */ + DataStartAddr += HeaderTabIndex; + + return(Valid_WAVE_File); +} + +/******************************************************************************* +* Function Name : GetVar_AudioDataIndex +* Description : returns AudioDataIndex variable value (used by stm32f10x_it.c file). +* Input : None +* Output : None +* Return : AudioDataIndex +*******************************************************************************/ +uint32_t GetVar_AudioDataIndex(void) +{ + return AudioDataIndex; +} + +/******************************************************************************* +* Function Name : SetVar_AudioDataIndex +* Description : Sets AudioDataIndex variable value (used by stm32f10x_it.c file). +* Input : None +* Output : None +* Return : AudioDataIndex +*******************************************************************************/ +void SetVar_AudioDataIndex(uint32_t value) +{ + AudioDataIndex = value; +} + +/******************************************************************************* +* Function Name : IncrementVar_AudioDataIndex +* Description : Increment the AudioDataIndex variable. +* Input : - IncrementNumber: number of incrementations. +* Output : None +* Return : None +*******************************************************************************/ +void IncrementVar_AudioDataIndex(uint32_t IncrementNumber) +{ + AudioDataIndex += (uint32_t)IncrementNumber; + + if (AudioDataIndex >= AudioDataLength) + { + ResetVar_AudioDataIndex(); + Decrement_AudioReplay(); + } +} + +/******************************************************************************* +* Function Name : DecrementVar_AudioDataIndex +* Description : Set the AudioDataIndex variable to 1. +* Input : None +* Output : None +* Return : None. +*******************************************************************************/ +void DecrementVar_AudioDataIndex(uint32_t DecrementNumber) +{ + if (DecrementNumber >= AudioDataIndex) + { + ResetVar_AudioDataIndex(); + } + else + { + AudioDataIndex -= (uint32_t)DecrementNumber; + } +} + +/******************************************************************************* +* Function Name : ResetVar_AudioDataIndex +* Description : Reset the AudioDataIndex variable. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +void ResetVar_AudioDataIndex(void) +{ + AudioDataIndex = DataStartAddr; + + /* Send the read command to the media */ + Media_StartReadSequence(AudioFileAddress + DataStartAddr + 1); +} + +/******************************************************************************* +* Function Name : GetVar_SendDummyData +* Description : returns SendDummyData variable value (used by stm32f10x_it.c file). +* Input : None +* Output : None +* Return : SendDummyData +*******************************************************************************/ +uint32_t GetVar_SendDummyData(void) +{ + return SendDummyData; +} + +/******************************************************************************* +* Function Name : SetVar_SendDummyData +* Description : Set the SendDummyData variable to 1. +* Input : None +* Output : None +* Return : SendDummyData +*******************************************************************************/ +uint32_t SetVar_SendDummyData(void) +{ + SendDummyData = (uint32_t)0x1; + + return SendDummyData; +} + +/******************************************************************************* +* Function Name : ResetVar_SendDummyData +* Description : Reset the SendDummyData variable to 0. +* Input : None +* Output : None +* Return : SendDummyData +*******************************************************************************/ +uint32_t ResetVar_SendDummyData(void) +{ + SendDummyData = (uint32_t)0; + + return SendDummyData; +} + +/******************************************************************************* +* Function Name : GetVar_AudioPlayStatus +* Description : returns AudioPlayStatus variable value (used by stm32f10x_it.c file). +* Input : None +* Output : None +* Return : AudioPlayStatus value. +*******************************************************************************/ +uint32_t GetVar_AudioPlayStatus(void) +{ + return AudioPlayStatus; +} + +/******************************************************************************* +* Function Name : SetVar_AudioPlayStatus +* Description : Set the AudioDataIndex variable to Status. +* Input : Status: could be AudioPlayStatus_STOPPED, AudioPlayStatus_PLAYING +* : or AudioPlayStatus_PAUSED. +* Output : None +* Return : AudioPlayStatus value. +*******************************************************************************/ +uint32_t SetVar_AudioPlayStatus(uint32_t Status) +{ + AudioPlayStatus = (uint32_t)Status; + + return AudioPlayStatus; +} + +/******************************************************************************* +* Function Name : GetVar_AudioReplay +* Description : returns AudioReplay variable value. +* Input : None +* Output : None +* Return : AudioReplay value. +*******************************************************************************/ +uint32_t GetVar_AudioReplay(void) +{ + return AudioReplay; +} + +/******************************************************************************* +* Function Name : SetVar_AudioReplay +* Description : Decrement the AudioReplayCount variable if AudioReplay is different +* : from zero (infinite replaying). +* Input : None. +* Output : None +* Return : AudioPlayStatus value. +*******************************************************************************/ +void Decrement_AudioReplay(void) +{ + if (AudioReplay != 0) + { + AudioReplayCount--; + + if (AudioReplayCount == 0) + { + /* Command the Stop of the audio playing */ + SetVar_AudioPlayStatus(AudioPlayStatus_STOPPED); + + /* Reset the counter */ + AudioReplayCount = AudioReplay; + } + } +} + +/******************************************************************************* +* Function Name : GetVar_CurrentOutputDevice +* Description : Get the current output device selected . +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +uint32_t GetVar_CurrentOutputDevice(void) +{ + return CurrentOutputDevice; +} + +/******************************************************************************* +* Function Name : GetVar_AudioDataLength +* Description : Get the current audio file data length . +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +uint32_t GetVar_AudioDataLength(void) +{ + return AudioDataLength; +} + +/******************************************************************************* +* Function Name : GetVar_i2saudiofreq +* Description : Get the current audio frequency . +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +uint16_t GetVar_i2saudiofreq(void) +{ + return i2saudiofreq; +} + +/******************************************************************************* +* Function Name : AudioFile_Init +* Description : Initializes the SPI_Flash and returns the Wavadatalength variable. +* Input : None +* Output : None +* Return : - The length of the wave file read from the SPI_Flash +* - 1 if an error occurred when initializing the memory. +* - 2 if an error occurred on the audio file initialization. +*******************************************************************************/ +uint32_t AudioFile_Init(void) +{ + uint32_t err = 0; + + /* Initialize the media support */ + err = Media_Init(); + + /* Check if Memory initialization is OK */ + if (err != 0) + { + return 1; + } + + /* Read a Byte buffer and store it in the Header table*/ + Media_BufferRead(AudioFileHeader, AudioFileAddress, HEADER_SIZE); + + /* Read and check the audio file Header */ + WaveFileStatus = I2S_CODEC_WaveParsing(AudioFileHeader); + + /* Check if the selected file is a correct wave file */ + if (WaveFileStatus == Valid_WAVE_File) + { + /* Read and set the audio data length (/!\ data are counted as BYTES /!\) */ + AudioDataLength = WAVE_Format.DataSize ; + + /* Read and set the audio frequency */ + i2saudiofreq = (uint16_t)WAVE_Format.SampleRate; + + /* Return the audio file length */ + return AudioDataLength; + } + else /* Wrong wave file */ + { + return 2; + } +} + +/******************************************************************************* +* Function Name : NVIC_Config +* Description : Configure the I2Ss NVIC channel. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +static void NVIC_Config(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + + /* SPI2 IRQ Channel configuration */ + NVIC_InitStructure.NVIC_IRQChannel = SPI2_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +} + +/******************************************************************************* +* Function Name : GPIO_Config +* Description : Initializes the GPIO pins used by the codec application. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +void I2S_GPIO_Config(void) +{ + GPIO_InitTypeDef GPIO_InitStructure; + + /* Enable GPIOB, GPIOC and AFIO clock */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOC | RCC_APB2Periph_GPIOG | + RCC_APB2Periph_GPIOF | RCC_APB2Periph_AFIO, ENABLE); + + /* I2S2 SD, CK and WS pins configuration */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_15; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_Init(GPIOB, &GPIO_InitStructure); + + /* I2S2 MCK pin configuration */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7; + GPIO_Init(GPIOC, &GPIO_InitStructure); + + /* LEDs pins configuration */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; + GPIO_Init(GPIOF, &GPIO_InitStructure); + + /* I2C1 SCL PB6 and SDA PB7 pins configuration */ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_OD; + GPIO_Init(GPIOB, &GPIO_InitStructure); + + /* Enable the I2C1 APB1 clock */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C1, ENABLE); + + /* Turn Off All LEDs */ + GPIO_ResetBits(GPIOF, GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9); + GPIO_ResetBits(Codec_PDN_GPIO, Codec_PDN_Pin); + + /* Configure the Codec PDN pin as output PushPull */ + GPIO_InitStructure.GPIO_Pin = Codec_PDN_Pin; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; + GPIO_Init(Codec_PDN_GPIO, &GPIO_InitStructure); +} + +/******************************************************************************* +* Function Name : I2S_Config +* Description : Configure the I2S Peripheral. +* Input : - Standard: I2S_Standard_Phillips, I2S_Standard_MSB or I2S_Standard_LSB +* - MCLKOutput: I2S_MCLKOutput_Enable or I2S_MCLKOutput_Disable +* - AudioFreq: I2S_AudioFreq_8K, I2S_AudioFreq_16K, I2S_AudioFreq_22K, +* I2S_AudioFreq_44K or I2S_AudioFreq_48K +* Output : None +* Return : None +*******************************************************************************/ +void I2S_Config(uint16_t Standard, uint16_t MCLKOutput, uint16_t AudioFreq) +{ + I2S_InitTypeDef I2S_InitStructure; + + /* Enable I2S2 APB1 clock */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2, ENABLE); + + /* Deinitialize SPI2 peripheral */ + SPI_I2S_DeInit(SPI2); + + /* I2S2 peripheral configuration */ + I2S_InitStructure.I2S_Mode = I2S_Mode_MasterTx; + I2S_InitStructure.I2S_Standard = Standard; + I2S_InitStructure.I2S_DataFormat = I2S_DataFormat_16b; + I2S_InitStructure.I2S_MCLKOutput = MCLKOutput; + I2S_InitStructure.I2S_AudioFreq = AudioFreq; + I2S_InitStructure.I2S_CPOL = I2S_CPOL_Low; + I2S_Init(SPI2, &I2S_InitStructure); + + /* Disable the I2S2 TXE Interrupt */ + SPI_I2S_ITConfig(SPI2, SPI_I2S_IT_TXE, DISABLE); + + /* Enable the SPI2/I2S2 peripheral */ + I2S_Cmd(SPI2, ENABLE); +} + +/******************************************************************************* +* Function Name : I2C_Config +* Description : Configure the I2C1 Peripheral. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +static void I2C_Config(void) +{ + I2C_InitTypeDef I2C_InitStructure; + + /* I2C1 configuration */ + I2C_InitStructure.I2C_Mode = I2C_Mode_I2C; + I2C_InitStructure.I2C_DutyCycle = I2C_DutyCycle_2; + I2C_InitStructure.I2C_OwnAddress1 = 0x33; + I2C_InitStructure.I2C_Ack = I2C_Ack_Enable; + I2C_InitStructure.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit; + I2C_InitStructure.I2C_ClockSpeed = 200000; + I2C_Init(I2C1, &I2C_InitStructure); +} + +/******************************************************************************* +* Function Name : CODEC_Config +* Description : Configure the Codec in Headphone mode. +* Input : - OutputDevice: OutputDeviceHEADPHONE or OutputDeviceSPEAKER +* : - I2S_Standard: I2S communication standard could be I2S_Standard_Phillips +* : I2S_Standard_MSB or I2S_Standard_LSB. +* : - I2S_MCLKOutput: could be I2S_MCLKOutput_ +* : - Volume: +* Output : None +* Return : 0-> correct communication, else wrong communication +*******************************************************************************/ +uint32_t CODEC_Config(uint16_t OutputDevice, uint16_t I2S_Standard, uint16_t I2S_MCLKOutput, uint8_t Volume) +{ + uint32_t Standard = 0, counter = 0, PLLMode = 0; + + /* Command the sending of dummy data */ + ResetVar_SendDummyData(); + + /* Reset the Codec Registers */ + I2S_CODEC_Reset(); + + /* Determine the I2S standard used */ + switch (I2S_Standard) + { + case I2S_Standard_Phillips: + Standard = 0x03; + break; + case I2S_Standard_MSB: + Standard = 0x02; + break; + default : + Standard = 0x01; + break; + } + + /* HEADPHONE codec configuration */ + if ((OutputDevice & OutputDevice_HEADPHONE) != 0) + { + /* PLL Slave SD/WS reference mode ----------------------*/ + if (I2S_MCLKOutput == I2S_MCLKOutput_Disable) + { + /* set the PLLMode variable */ + PLLMode = 0x1; + + /* Phillips(0x03)/MSB(0x02)/LSB(0x01) mode with PLL */ + counter += CODEC_WriteRegister(0x04, (Standard | 0x20)); + /* MCKI input frequency = 256.Fs */ + counter += CODEC_WriteRegister(0x05, 0x03); + /* VCOM Power up (PMVCM bit)*/ + counter += CODEC_WriteRegister(0x00, 0x40); + /* Enable PLL*/ + counter += CODEC_WriteRegister(0x01, 0x01); + } + /* Ext Slave mode with no PLL --------------------------*/ + else + { + /* Reset the PLL mode variable */ + PLLMode = 0; + + /* Phillips(0x03)/MSB(0x02)/LSB(0x01) mode with no PLL */ + counter += CODEC_WriteRegister(0x04, Standard); + /* MCKI input frequency = 256.Fs */ + counter += CODEC_WriteRegister(0x05, 0x00); + /* VCOM Power up (PMVCM bit)*/ + counter += CODEC_WriteRegister(0x00, 0x40); + } + + /* Command the sending of dummy data */ + SetVar_SendDummyData(); + + /* Enable the I2S2 TXE Interrupt => Generate the clocks*/ + SPI_I2S_ITConfig(SPI2, SPI_I2S_IT_TXE, ENABLE); + + /* Extra Configuration (of the ALC) */ + counter += CODEC_WriteRegister(0x06, 0x3C ); + counter += CODEC_WriteRegister(0x08, 0xE1 ); + counter += CODEC_WriteRegister(0x0B, 0x00 ); + counter += CODEC_WriteRegister(0x07, 0x20 ); + counter += CODEC_WriteRegister(0x09, 0xC1 ); + counter += CODEC_WriteRegister(0x0C, 0xC1 ); + + /* MCKI is 256.Fs with no PLL */ + counter += CODEC_WriteRegister(0x05, 0x00 ); + /* Switch control from DAC to Headphone */ + counter += CODEC_WriteRegister(0x0F, 0x09 ); + /* Bass Boost and Deemphasis enable */ + counter += CODEC_WriteRegister(0x0E, 0x18 ); + /* Left Channel Digital Volume control */ + counter += CODEC_WriteRegister(0x0A, Volume); + /* Right Channel Digital Volume control */ + counter += CODEC_WriteRegister(0x0D, Volume); + /* Power up MIN and DAC (PMMIN and PMDAC bits)*/ + counter += CODEC_WriteRegister(0x00, 0x74); + /* Enable Slave mode and Left/Right HP lines*/ + counter += CODEC_WriteRegister(0x01, (0x30 | PLLMode)); + /* Exit HP mute mode */ + counter += CODEC_WriteRegister(0x01, (0x70 | PLLMode)); + } + + /* SPEAKER codec configuration */ + if ((OutputDevice & OutputDevice_SPEAKER) != 0) + { + /* PLL Slave SD/WS reference mode ----------------------*/ + if (I2S_MCLKOutput == I2S_MCLKOutput_Disable) + { + /* Phillips(0x03)/MSB(0x02)/LSB(0x01) mode with no PLL */ + counter += CODEC_WriteRegister(0x04, (Standard | 0x20)); + /* MCKI input frequency = 256.Fs */ + counter += CODEC_WriteRegister(0x05, 0x03); + /* VCOM Power up (PMVCM bit)*/ + counter += CODEC_WriteRegister(0x00, 0x40); + /* Enable PLL*/ + counter += CODEC_WriteRegister(0x01, 0x01); + } + /* Ext Slave mode with no PLL --------------------------*/ + else + { + /* Phillips(0x03)/MSB(0x02)/LSB(0x01) mode with no PLL */ + counter += CODEC_WriteRegister(0x04, Standard); + /* MCKI input frequency = 256.Fs */ + counter += CODEC_WriteRegister(0x05, 0x00); + /* VCOM Power up (PMVCM bit)*/ + counter += CODEC_WriteRegister(0x00, 0x40); + } + + /* Command the sending of dummy data */ + SetVar_SendDummyData(); + + /* Enable the I2S2 TXE Interrupt => Generate the clocks*/ + SPI_I2S_ITConfig(SPI2, SPI_I2S_IT_TXE, ENABLE); + + /* ReSelect the MCKI frequency (FS0-1 bits): 256.Fs */ + counter += CODEC_WriteRegister(0x05, 0x02 ); + /* Set up the path "DAC->Speaker-Amp" with no power save (DACS and SPPSN bits) */ + counter += CODEC_WriteRegister(0x02, 0x20 ); + /* Speaker Gain (SPKG0-1 bits): Gain=+10.65dB(ALC off)/+12.65(ALC on) */ + counter += CODEC_WriteRegister(0x03, 0x10); + + /* Extra Configuration (of the ALC) */ + counter += CODEC_WriteRegister(0x06, 0x3C ); + counter += CODEC_WriteRegister(0x08, 0xE1 ); + counter += CODEC_WriteRegister(0x0B, 0x00 ); + counter += CODEC_WriteRegister(0x07, 0x20 ); + counter += CODEC_WriteRegister(0x09, 0x91 ); + counter += CODEC_WriteRegister(0x0C, 0x91 ); + + /* Left Channel Digital Volume control */ + counter += CODEC_WriteRegister(0x0A, Volume); + /* Right Channel Digital Volume control */ + counter += CODEC_WriteRegister(0x0D, Volume); + /* Power up Speaker and DAC (PMSPK and PMDAC bits)*/ + counter += CODEC_WriteRegister(0x00, 0x54); + /* Set up the path "DAC -> Speaker-Amp" with no power save */ + counter += CODEC_WriteRegister(0x02, 0xA0 /*0xA1*/); + } + + /* Disable the I2S2 TXE Interrupt */ + SPI_I2S_ITConfig(SPI2, SPI_I2S_IT_TXE, DISABLE); + + /* Disable the sending of Dummy data */ + ResetVar_SendDummyData(); + + /* Return the counter value */ + return counter; +} + +/******************************************************************************* +* Function Name : CODEC_WriteRegister +* Description : Writes a value in a register of the audio Codec through I2C. +* Input : - RegisterAddr: The target register address (between 00x and 0x24) +* : - RegisterValue: The target register value to be written +* : - Verify: 0-> Don't verify the written data, 1-> Verify the written data +* Output : None +* Return : - 0 -> Correct write operation +* : - !0 -> Incorrect write operation +*******************************************************************************/ +uint32_t CODEC_WriteRegister(uint32_t RegisterAddr, uint32_t RegisterValue) +{ + uint32_t read_verif = 0; + + /* Reset all I2C2 registers */ + I2C_SoftwareResetCmd(I2C1, ENABLE); + I2C_SoftwareResetCmd(I2C1, DISABLE); + + /* Enable the I2C1 peripheral */ + I2C_Cmd(I2C1, ENABLE); + + /* Configure the I2C peripheral */ + I2C_Config(); + + /* Begin the config sequence */ + I2C_GenerateSTART(I2C1, ENABLE); + + /* Test on EV5 and clear it */ + while (!I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_MODE_SELECT)) + {} + /* Transmit the slave address and enable writing operation */ + I2C_Send7bitAddress(I2C1, CODEC_ADDRESS, I2C_Direction_Transmitter); + + /* Test on EV6 and clear it */ + while (!I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED)) + {} + /* Transmit the first address for r/w operations */ + I2C_SendData(I2C1, RegisterAddr); + + /* Test on EV8 and clear it */ + while (!I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_BYTE_TRANSMITTED)) + {} + + /* Prepare the register value to be sent */ + I2C_SendData(I2C1, RegisterValue); + + /* Test on EV8 and clear it */ + while (!I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_BYTE_TRANSMITTED)) + {} + + /* End the configuration sequence */ + I2C_GenerateSTOP(I2C1, ENABLE); + + /* Verify (if needed) that the loaded data is correct */ +#ifdef VERIFY_WRITTENDATA + /* Read the just written register*/ + read_verif = CODEC_ReadRegister(RegisterAddr); + + /* Load the register and verify its value */ + if (read_verif != RegisterValue) + { + /* Control data wrongly transferred */ + read_verif = 1; + } + else + { + /* Control data correctly transferred */ + read_verif = 0; + } +#endif + + /* Return the verifying value: 0 (Passed) or 1 (Failed) */ + return read_verif; +} + +/******************************************************************************* +* Function Name : CODEC_ReadRegister +* Description : Reads a register of the audio Codec through I2C. +* Input : - RegisterAddr: The target register address (between 00x and 0x24) +* Output : None +* Return : The value of the read register +*******************************************************************************/ +uint32_t CODEC_ReadRegister(uint32_t RegisterAddr) +{ + uint32_t tmp = 0; + + /* Disable the I2C1 peripheral */ + I2C_Cmd(I2C1, DISABLE); + + /* Reset all I2C2 registers */ + I2C_SoftwareResetCmd(I2C1, ENABLE); + I2C_SoftwareResetCmd(I2C1, DISABLE); + + /* Configure the I2C peripheral */ + I2C_Config(); + + /* Enable the I2C peripheral */ + I2C_GenerateSTART(I2C1, ENABLE); + + /* Test on EV5 and clear it */ + while (!I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_MODE_SELECT)) + {} + + /* Disable Acknowledgement */ + I2C_AcknowledgeConfig(I2C1, DISABLE); + + /* Transmit the slave address and enable writing operation */ + I2C_Send7bitAddress(I2C1, CODEC_ADDRESS, I2C_Direction_Transmitter); + + /* Test on EV6 and clear it */ + while (!I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED)) + {} + + /* Transmit the first address for r/w operations */ + I2C_SendData(I2C1, RegisterAddr); + + /* Test on EV8 and clear it */ + while (!I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_BYTE_TRANSMITTED)) + {} + + /* Regenerate a start condition */ + I2C_GenerateSTART(I2C1, ENABLE); + + /* Test on EV5 and clear it */ + while (!I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_MODE_SELECT)) + {} + + /* Transmit the slave address and enable writing operation */ + I2C_Send7bitAddress(I2C1, CODEC_ADDRESS, I2C_Direction_Receiver); + + /* Test on EV6 and clear it */ + while (!I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED)) + {} + + /* Test on EV7 and clear it */ + while (!I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_BYTE_RECEIVED)) + {} + + /* End the configuration sequence */ + I2C_GenerateSTOP(I2C1, ENABLE); + + /* Load the register value */ + tmp = I2C_ReceiveData(I2C1); + + /* Disable Acknowledgement */ + I2C_AcknowledgeConfig(I2C1, ENABLE); + + /* Return the read value */ + return tmp; +} + +/******************************************************************************* +* Function Name : ReadUnit +* Description : Reads a number of bytes from the SPI Flash and reorder them +* in Big or little endian. +* Input : - NbrOfBytes : number of bytes to read. +* This parameter must be a number between 1 and 4. +* - ReadAddr : external memory address to read from. +* - Endians : specifies the bytes endianness. +* This parameter can be one of the following values: +* - LittleEndian +* - BigEndian +* Output : None +* Return : Bytes read from the SPI Flash. +*******************************************************************************/ +static uint32_t ReadUnit(uint8_t NbrOfBytes, Endianness BytesFormat) +{ + uint32_t index = 0; + uint32_t Temp = 0; + + if (BytesFormat == LittleEndian) + { + for (index = 0; index < NbrOfBytes; index++) + { + Temp |= AudioFileHeader[HeaderTabIndex++] << (index * 8); + } + } + else + { + for (index = NbrOfBytes; index != 0; index--) + { + Temp |= AudioFileHeader[HeaderTabIndex++] << ((index - 1) * 8); + } + } + + return Temp; +} + +/******************************************************************************* +* Function Name : I2S_CODEC_MediaReadHalfWord +* Description : Read one half word from the media (SPI_Flash/NOR/NAND memories..) +* Input : - Offset: the address offset for read operation +* Output : None. +* Return : Data read from the media memory. +*******************************************************************************/ +uint16_t Media_ReadHalfWord(uint32_t Offset) +{ + /* Test if the left channel is to be sent */ + if (monovar == 0) + { + /* Enable the FSMC that share a pin w/ I2C1 (LBAR) */ + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE); + + tmpvar = (*(__IO uint16_t *) (AudioFileAddress + Offset)); + + /* Disable the FSMC that share a pin w/ I2C1 (LBAR) */ + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, DISABLE); + + /* Increment the mono variable only if the file is in mono format */ + if (WAVE_Format.NumChannels == Channel_MONO) + { + /* Increment the monovar variable */ + monovar++; + } + + /* Return the read value */ + return tmpvar; + } + /* Right channel to be sent in mono format */ + else + { + /* Reset the monovar variable */ + monovar = 0; + + /* Return the previous read data in mono format */ + return tmpvar; + } +} + +/******************************************************************************* +* Function Name : I2S_CODEC_MediaReadByte +* Description : Read one byte from the media (SPI_Flash/NOR/NAND memories..) +* Input : - Offset: the address offset for read operation +* Output : None. +* Return : Data read from the media memory. +*******************************************************************************/ +uint8_t Media_ReadByte(uint32_t Offset) +{ + uint8_t tmp = 0; + + /* Enable the FSMC that share a pin w/ I2C1 (LBAR) */ + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE); + + /* Read data from the specified location */ + tmp = (*(__IO uint8_t *) (AudioFileAddress + Offset)); + + /* Disable the FSMC that share a pin w/ I2C1 (LBAR) */ + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, DISABLE); + + return tmp; +} + +/******************************************************************************* +* Function Name : Media_Init +* Description : Read one byte from the media (SPI_Flash/NOR/NAND memories..) +* Input : - Offset: the address offset for read operation +* Output : None. +* Return : - 0 if initialization is OK +* - 1 if initialization failed.. +*******************************************************************************/ +uint32_t Media_Init(void) +{ + return 0; +} + +/******************************************************************************* +* Function Name : Media_BufferRead +* Description : Read a buffer from the memory media +* Input : - pBuffer: Destination buffer address +* : - ReadAddr: start reading position +* : - NumByteToRead: size of the buffer to read +* Output : None. +* Return : None. +*******************************************************************************/ +void Media_BufferRead(uint8_t* pBuffer, uint32_t ReadAddr, uint16_t NumByteToRead) +{ + /* Enable the FSMC that share a pin w/ I2C1 (LBAR) */ + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE); + + /* Read the data */ + while (NumByteToRead--) + { + *pBuffer++ = *(__IO uint8_t *)ReadAddr++; + } + + /* Disable the FSMC that share a pin w/ I2C1 (LBAR) */ + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, DISABLE); +} + +/******************************************************************************* +* Function Name : Media_StartReadSequence +* Description : Initialize reading sequence on the media. +* Input : - ReadAddr: start reading position +* Output : None. +* Return : None. +*******************************************************************************/ +void Media_StartReadSequence(uint32_t ReadAddr) +{ + /* This function could be used for memories needing a start read sequence + like SPI_Flash memory */ +} + +/******************************************************************************* +* Function Name : I2S_CODEC_DataTransfer +* Description : Sends the audio data using the SPI2 peripheral and checks the +* : audio playing status (if a command (Pause/Stop) is pending +* : the playing status is updated). If the TXE flag interrupt +* : is used to synchronize data sending, this function should be +* : called in the SPI2 ISR. +* Input : None. +* Output : None. +* Return : None. +*******************************************************************************/ +void I2S_CODEC_DataTransfer(void) +{ + /* Audio codec configuration section -------------------------------------*/ + if (GetVar_SendDummyData() == 1) + { + /* Send a dummy data just to generate the I2S clock */ + SPI_I2S_SendData(SPI2, DUMMY_DATA); + } + /* Audio codec communication section -------------------------------------*/ + else + { + /* Send the data read from the memory */ + SPI_I2S_SendData(SPI2, (Media_ReadHalfWord(AudioDataIndex))); + + /* Increment the index */ + IncrementVar_AudioDataIndex(WAVE_Format.NumChannels); + + /* Check and update the stream playing status */ + I2S_CODEC_UpdateStatus(); + } +} +/******************************************************************************* +* Function Name : delay +* Description : Inserts a delay time. +* Input : nCount: specifies the delay time length +* Output : None +* Return : The length of the wave file read from the SPI_Flash +*******************************************************************************/ +void delay(__IO uint32_t nCount) +{ + for (; nCount != 0; nCount--); +} +#endif +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/main.c b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/main.c new file mode 100644 index 0000000..b58c6c3 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/main.c @@ -0,0 +1,87 @@ +/** + ****************************************************************************** + * @file main.c + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Audio Speaker Demo main file + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Includes ------------------------------------------------------------------*/ +#include "hw_config.h" +#include "usb_lib.h" +#include "usb_desc.h" +#include "usb_prop.h" +#include "usb_pwr.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Extern variables ----------------------------------------------------------*/ +extern uint32_t MUTE_DATA; +extern uint16_t In_Data_Offset; +extern uint16_t Out_Data_Offset; +extern uint8_t Stream_Buff[24]; +extern uint8_t IT_Clock_Sent; +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/******************************************************************************* +* Function Name : main. +* Description : Main routine. +* Input : None. +* Output : None. +* Return : None. +*******************************************************************************/ +int main(void) +{ + Set_System(); + Set_USBClock(); + USB_Config(); + USB_Init(); + Speaker_Config(); + while (1) + {} +} + +#ifdef USE_FULL_ASSERT +/******************************************************************************* +* Function Name : assert_failed +* Description : Reports the name of the source file and the source line number +* where the assert_param error has occurred. +* Input : - file: pointer to the source file name +* - line: assert_param error line source number +* Output : None +* Return : None +*******************************************************************************/ +void assert_failed(uint8_t* file, uint32_t line) +{ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + + /* Infinite loop */ + while (1) + {} +} +#endif + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/stm32_it.c b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/stm32_it.c new file mode 100644 index 0000000..74ba641 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/stm32_it.c @@ -0,0 +1,336 @@ +/** + ****************************************************************************** + * @file stm32_it.c + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Main Interrupt Service Routines. + * This file provides template for all exceptions handler and peripherals + * interrupt service routine. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "hw_config.h" +#include "stm32_it.h" +#include "usb_istr.h" +#include "usb_lib.h" +#include "usb_pwr.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +#define DUMMYDATA 0x1111 + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +uint16_t Out_Data_Offset; +extern uint16_t In_Data_Offset; +extern uint8_t Stream_Buff[24]; +extern uint32_t MUTE_DATA; + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/******************************************************************************/ +/* Cortex-M Processor Exceptions Handlers */ +/******************************************************************************/ + +/******************************************************************************* +* Function Name : NMI_Handler +* Description : This function handles NMI exception. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +void NMI_Handler(void) +{ +} + +/******************************************************************************* +* Function Name : HardFault_Handler +* Description : This function handles Hard Fault exception. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +void HardFault_Handler(void) +{ + /* Go to infinite loop when Hard Fault exception occurs */ + while (1) + { + } +} + +/******************************************************************************* +* Function Name : MemManage_Handler +* Description : This function handles Memory Manage exception. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +void MemManage_Handler(void) +{ + /* Go to infinite loop when Memory Manage exception occurs */ + while (1) + { + } +} + +/******************************************************************************* +* Function Name : BusFault_Handler +* Description : This function handles Bus Fault exception. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +void BusFault_Handler(void) +{ + /* Go to infinite loop when Bus Fault exception occurs */ + while (1) + { + } +} + +/******************************************************************************* +* Function Name : UsageFault_Handler +* Description : This function handles Usage Fault exception. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +void UsageFault_Handler(void) +{ + /* Go to infinite loop when Usage Fault exception occurs */ + while (1) + { + } +} + +/******************************************************************************* +* Function Name : SVC_Handler +* Description : This function handles SVCall exception. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +void SVC_Handler(void) +{ +} + +/******************************************************************************* +* Function Name : DebugMon_Handler +* Description : This function handles Debug Monitor exception. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +void DebugMon_Handler(void) +{ +} + +/******************************************************************************* +* Function Name : PendSV_Handler +* Description : This function handles PendSV_Handler exception. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +void PendSV_Handler(void) +{ +} + +/******************************************************************************* +* Function Name : SysTick_Handler +* Description : This function handles SysTick Handler. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +void SysTick_Handler(void) +{ +} + +/******************************************************************************/ +/* STM32 Peripherals Interrupt Handlers */ +/******************************************************************************/ + +/******************************************************************************* +* Function Name : USB_HP_CAN1_TX_IRQHandler +* Description : This function handles USB High Priority or CAN1 TX interrupts +* requests. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +void USB_HP_CAN1_TX_IRQHandler(void) +{ + CTR_HP(); +} + +/******************************************************************************* +* Function Name : USB_IRQHandler +* Description : This function handles USB Low Priority or CAN RX0 interrupts +* requests. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +#if defined(STM32L1XX_MD) +void USB_LP_IRQHandler(void) +#else +void USB_LP_CAN1_RX0_IRQHandler(void) +#endif +{ + USB_Istr(); +} + +#ifdef USE_STM3210B_EVAL +/******************************************************************************* +* Function Name : TIM2_IRQHandler +* Description : This function handles TIM2 global interrupt request. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +void TIM2_IRQHandler(void) +{ + if (TIM_GetITStatus(TIM2, TIM_IT_Update) != RESET) + { + /* Clear TIM2 update interrupt */ + TIM_ClearITPendingBit(TIM2, TIM_IT_Update); + + if ((Out_Data_Offset < In_Data_Offset) && ((uint8_t)(MUTE_DATA) == 0)) + { + TIM_SetCompare3(TIM4, Stream_Buff[Out_Data_Offset]); + Out_Data_Offset++; + } + } +} +#endif /* USE_STM3210B_EVAL */ + +#if defined (USE_STM3210E_EVAL) +/******************************************************************************* +* Function Name : SPI2_IRQHandler +* Description : This function handles SPI2 global interrupt request. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +void SPI2_IRQHandler(void) +{ + static uint8_t channel = 0; + + if ((SPI_I2S_GetITStatus(SPI2, SPI_I2S_IT_TXE) == SET)) + { + /* Audio codec configuration section */ + if (GetVar_SendDummyData() == 1) + { + /* Send a dummy data just to generate the I2S clock */ + SPI_I2S_SendData(SPI2, DUMMYDATA); + } + + else if ((Out_Data_Offset < In_Data_Offset) && ((uint8_t)(MUTE_DATA) == 0)) + { + if ((channel++) & 1) + { + SPI_I2S_SendData(SPI2, (uint16_t)Stream_Buff[Out_Data_Offset++]); + } + else + { + SPI_I2S_SendData(SPI2, (uint16_t)Stream_Buff[Out_Data_Offset]); + } + } + } +} + +#endif /* USE_STM3210E_EVAL */ + +#if defined(STM32L1XX_MD) + +/** + * @brief This function handles TIM6 global interrupt request. + * @param None + * @retval None + */ +void TIM6_IRQHandler(void) +{ + if (TIM_GetITStatus(TIM6, TIM_IT_Update) != RESET) + { + /* Clear TIM6 update interrupt */ + TIM_ClearITPendingBit(TIM6, TIM_IT_Update); + + if ((Out_Data_Offset < In_Data_Offset) && ((uint8_t)(MUTE_DATA) == 0)) + { + /* Set DAC Channel1 DHR register */ + DAC_SetChannel1Data(DAC_Align_8b_R, Stream_Buff[Out_Data_Offset]); + Out_Data_Offset++; + } + } +} + +#endif /* STM32L1XX_XD */ + +/******************************************************************************* +* Function Name : USB_HP_IRQHandler +* Description : This function handles USB High Priority interrupts requests. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +void USB_HP_IRQHandler(void) +{ + CTR_HP(); +} + +/******************************************************************************* +* Function Name : USB_WakeUP_IRQHandler +* Description : This function handles USB WakeUp interrupt request. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +#if defined(STM32L1XX_MD) +void USB_FS_WKUP_IRQHandler(void) +#else +void USBWakeUp_IRQHandler(void) +#endif +{ + EXTI_ClearITPendingBit(EXTI_Line18); +} + +/******************************************************************************/ +/* STM32 Peripherals Interrupt Handlers */ +/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ +/* available peripheral interrupt handler's name please refer to the startup */ +/* file (startup_stm32xxx.s). */ +/******************************************************************************/ + +/******************************************************************************* +* Function Name : PPP_IRQHandler +* Description : This function handles PPP interrupt request. +* Input : None +* Output : None +* Return : None +*******************************************************************************/ +/*void PPP_IRQHandler(void) +{ +}*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/system_stm32f10x.c b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/system_stm32f10x.c new file mode 100644 index 0000000..3686a2f --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/system_stm32f10x.c @@ -0,0 +1,917 @@ +/** + ****************************************************************************** + * @file system_stm32f10x.c + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. + * + * 1. This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier + * factors, AHB/APBx prescalers and Flash settings). + * This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f10x_xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * 2. After each device reset the HSI (8 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to + * configure the system clock before to branch to main program. + * + * 3. If the system clock source selected by user fails to startup, the SystemInit() + * function will do nothing and HSI still used as system clock source. User can + * add some code to deal with this issue inside the SetSysClock() function. + * + * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on + * the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. + * When HSE is used as system clock source, directly or through PLL, and you + * are using different crystal you have to adapt the HSE value to your own + * configuration. + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x_system + * @{ + */ + +/** @addtogroup STM32F10x_System_Private_Includes + * @{ + */ + +#include "stm32f10x.h" + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Defines + * @{ + */ + +/*!< Uncomment the line corresponding to the desired System clock (SYSCLK) + frequency (after reset the HSI is used as SYSCLK source) + + IMPORTANT NOTE: + ============== + 1. After each device reset the HSI is used as System clock source. + + 2. Please make sure that the selected System clock doesn't exceed your device's + maximum frequency. + + 3. If none of the define below is enabled, the HSI is used as System clock + source. + + 4. The System clock configuration functions provided within this file assume that: + - For Low, Medium and High density Value line devices an external 8MHz + crystal is used to drive the System clock. + - For Low, Medium and High density devices an external 8MHz crystal is + used to drive the System clock. + - For Connectivity line devices an external 25MHz crystal is used to drive + the System clock. + If you are using different crystal you have to adapt those functions accordingly. + */ + +#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) +/* #define SYSCLK_FREQ_HSE HSE_VALUE */ + #define SYSCLK_FREQ_24MHz 24000000 +#else +/* #define SYSCLK_FREQ_HSE HSE_VALUE */ +/* #define SYSCLK_FREQ_24MHz 24000000 */ +/* #define SYSCLK_FREQ_36MHz 36000000 */ +/* #define SYSCLK_FREQ_48MHz 48000000 */ +/* #define SYSCLK_FREQ_56MHz 56000000 */ +#define SYSCLK_FREQ_72MHz 72000000 +#endif + +/*!< Uncomment the following line if you need to use external SRAM mounted + on STM3210E-EVAL board (STM32 High density and XL-density devices) or on + STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ +#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) +/* #define DATA_IN_ExtSRAM */ +#endif + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ + + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Variables + * @{ + */ + +/******************************************************************************* +* Clock Definitions +*******************************************************************************/ +#ifdef SYSCLK_FREQ_HSE + uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_24MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_36MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */ +#else /*!< HSI Selected as System Clock source */ + uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */ +#endif + +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_FunctionPrototypes + * @{ + */ + +static void SetSysClock(void); + +#ifdef SYSCLK_FREQ_HSE + static void SetSysClockToHSE(void); +#elif defined SYSCLK_FREQ_24MHz + static void SetSysClockTo24(void); +#elif defined SYSCLK_FREQ_36MHz + static void SetSysClockTo36(void); +#elif defined SYSCLK_FREQ_48MHz + static void SetSysClockTo48(void); +#elif defined SYSCLK_FREQ_56MHz + static void SetSysClockTo56(void); +#elif defined SYSCLK_FREQ_72MHz + static void SetSysClockTo72(void); +#endif + +#ifdef DATA_IN_ExtSRAM + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemCoreClock variable. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +void SystemInit (void) +{ + /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ + + RCC->CFGR &= (uint32_t)0xF8FF0000; + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ + RCC->CFGR &= (uint32_t)0xFF80FFFF; + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#else + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; +#endif /* STM32F10X_XX */ + +#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) + #ifdef DATA_IN_ExtSRAM + SystemInit_ExtMemCtl(); + #endif /* DATA_IN_ExtSRAM */ +#endif + + /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */ + /* Configure the Flash Latency cycles and enable prefetch buffer */ + SetSysClock(); + +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value + * 8 MHz or 25 MHz, depending on the product used), user has to ensure + * that HSE_VALUE is same as the real frequency of the crystal used. + * Otherwise, this function may have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0; + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + uint32_t prediv1factor = 0; +#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */ + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + { + #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + #else + /* HSE selected as PLL clock entry */ + if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET) + {/* HSE oscillator clock divided by 2 */ + SystemCoreClock = (HSE_VALUE >> 1) * pllmull; + } + else + { + SystemCoreClock = HSE_VALUE * pllmull; + } + #endif + } + + break; + + default: + SystemCoreClock = HSI_VALUE; + break; + } + + /* Compute HCLK clock frequency ----------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +/** + * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. + * @param None + * @retval None + */ +static void SetSysClock(void) +{ +#ifdef SYSCLK_FREQ_HSE + SetSysClockToHSE(); +#elif defined SYSCLK_FREQ_24MHz + SetSysClockTo24(); +#elif defined SYSCLK_FREQ_36MHz + SetSysClockTo36(); +#elif defined SYSCLK_FREQ_48MHz + SetSysClockTo48(); +#elif defined SYSCLK_FREQ_56MHz + SetSysClockTo56(); +#elif defined SYSCLK_FREQ_72MHz + SetSysClockTo72(); +#endif + + /* If none of the define above is enabled, the HSI is used as System clock + source (default after reset) */ +} + +/** + * @brief Setup the external memory controller. Called in startup_stm32f10x.s + * before jump to __main + * @param None + * @retval None + */ +#ifdef DATA_IN_ExtSRAM +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f10x_xx.s/.c before jump to main. + * This function configures the external SRAM mounted on STM3210E-EVAL + * board (STM32 High density devices). This SRAM will be used as program + * data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ +/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is + required, then adjust the Register Addresses */ + + /* Enable FSMC clock */ + RCC->AHBENR = 0x00000114; + + /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ + RCC->APB2ENR = 0x000001E0; + +/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ +/*---------------- SRAM Address lines configuration -------------------------*/ +/*---------------- NOE and NWE configuration --------------------------------*/ +/*---------------- NE3 configuration ----------------------------------------*/ +/*---------------- NBL0, NBL1 configuration ---------------------------------*/ + + GPIOD->CRL = 0x44BB44BB; + GPIOD->CRH = 0xBBBBBBBB; + + GPIOE->CRL = 0xB44444BB; + GPIOE->CRH = 0xBBBBBBBB; + + GPIOF->CRL = 0x44BBBBBB; + GPIOF->CRH = 0xBBBB4444; + + GPIOG->CRL = 0x44BBBBBB; + GPIOG->CRH = 0x44444B44; + +/*---------------- FSMC Configuration ---------------------------------------*/ +/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ + + FSMC_Bank1->BTCR[4] = 0x00001011; + FSMC_Bank1->BTCR[5] = 0x00000200; +} +#endif /* DATA_IN_ExtSRAM */ + +#ifdef SYSCLK_FREQ_HSE +/** + * @brief Selects HSE as System clock source and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockToHSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + +#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 0 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; +#endif + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + + /* Select HSE as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE; + + /* Wait till HSE is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_24MHz +/** + * @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo24(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { +#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 0 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; +#endif + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6); +#else + /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6); +#endif /* STM32F10X_XX */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_36MHz +/** + * @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo36(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + + /* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9); + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_48MHz +/** + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo48(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6); + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +#elif defined SYSCLK_FREQ_56MHz +/** + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo56(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + + + /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7); + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +#elif defined SYSCLK_FREQ_72MHz +/** + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo72(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; + + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + + /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | + RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9); + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/system_stm32l1xx.c b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/system_stm32l1xx.c new file mode 100644 index 0000000..1be659d --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/system_stm32l1xx.c @@ -0,0 +1,533 @@ +/** + ****************************************************************************** + * @file system_stm32l1xx.c + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. + * This file contains the system clock configuration for STM32L1xx Ultra + * Low Power devices, and is generated by the clock configuration + * tool "STM32L1xx_Clock_Configuration_V1.1.0.xls". + * + * 1. This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier + * and Divider factors, AHB/APBx prescalers and Flash settings), + * depending on the configuration made in the clock xls tool. + * This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32l1xx_xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * 2. After each device reset the MSI (2.1 MHz Range) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32l1xx_xx.s" file, to + * configure the system clock before to branch to main program. + * + * 3. If the system clock source selected by user fails to startup, the SystemInit() + * function will do nothing and MSI still used as system clock source. User can + * add some code to deal with this issue inside the SetSysClock() function. + * + * 4. The default value of HSE crystal is set to 8MHz, refer to "HSE_VALUE" define + * in "stm32l1xx.h" file. When HSE is used as system clock source, directly or + * through PLL, and you are using different crystal you have to adapt the HSE + * value to your own configuration. + * + * 5. This file configures the system clock as follows: + *============================================================================= + * System Clock Configuration + *============================================================================= + * System Clock source | PLL(HSE) + *----------------------------------------------------------------------------- + * SYSCLK | 32000000 Hz + *----------------------------------------------------------------------------- + * HCLK | 32000000 Hz + *----------------------------------------------------------------------------- + * AHB Prescaler | 1 + *----------------------------------------------------------------------------- + * APB1 Prescaler | 1 + *----------------------------------------------------------------------------- + * APB2 Prescaler | 1 + *----------------------------------------------------------------------------- + * HSE Frequency | 8000000 Hz + *----------------------------------------------------------------------------- + * PLL DIV | 3 + *----------------------------------------------------------------------------- + * PLL MUL | 12 + *----------------------------------------------------------------------------- + * VDD | 3.3 V + *----------------------------------------------------------------------------- + * Vcore | 1.8 V (Range 1) + *----------------------------------------------------------------------------- + * Flash Latency | 1 WS + *----------------------------------------------------------------------------- + * SDIO clock (SDIOCLK) | 48000000 Hz + *----------------------------------------------------------------------------- + * Require 48MHz for USB clock | Disabled + *----------------------------------------------------------------------------- + *============================================================================= + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l1xx_system + * @{ + */ + +/** @addtogroup STM32L1xx_System_Private_Includes + * @{ + */ + +#include "stm32l1xx.h" + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_Defines + * @{ + */ + +/*!< Uncomment the following line if you need to use external SRAM mounted + on STM32L152D_EVAL board as data memory */ +/* #define DATA_IN_ExtSRAM */ + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_Variables + * @{ + */ +uint32_t SystemCoreClock = 32000000; +__I uint8_t PLLMulTable[9] = {3, 4, 6, 8, 12, 16, 24, 32, 48}; +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_FunctionPrototypes + * @{ + */ + +static void SetSysClock(void); +#ifdef DATA_IN_ExtSRAM + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM */ + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemCoreClock variable. + * @param None + * @retval None + */ +void SystemInit (void) +{ + /*!< Set MSION bit */ + RCC->CR |= (uint32_t)0x00000100; + + /*!< Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], MCOSEL[2:0] and MCOPRE[2:0] bits */ + RCC->CFGR &= (uint32_t)0x88FFC00C; + + /*!< Reset HSION, HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xEEFEFFFE; + + /*!< Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /*!< Reset PLLSRC, PLLMUL[3:0] and PLLDIV[1:0] bits */ + RCC->CFGR &= (uint32_t)0xFF02FFFF; + + /*!< Disable all interrupts */ + RCC->CIR = 0x00000000; + +#ifdef DATA_IN_ExtSRAM + SystemInit_ExtMemCtl(); +#endif /* DATA_IN_ExtSRAM */ + + /* Configure the System clock frequency, AHB/APBx prescalers and Flash settings */ + SetSysClock(); + +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ +#endif +} + +/** + * @brief Update SystemCoreClock according to Clock Register Values + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI + * value as defined by the MSI range. + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32l1xx.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32l1xx.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmul = 0, plldiv = 0, pllsource = 0, msirange = 0; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* MSI used as system clock */ + msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13; + SystemCoreClock = (32768 * (1 << (msirange + 1))); + break; + case 0x04: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case 0x08: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case 0x0C: /* PLL used as system clock */ + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmul = RCC->CFGR & RCC_CFGR_PLLMUL; + plldiv = RCC->CFGR & RCC_CFGR_PLLDIV; + pllmul = PLLMulTable[(pllmul >> 18)]; + plldiv = (plldiv >> 22) + 1; + + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + + if (pllsource == 0x00) + { + /* HSI oscillator clock selected as PLL clock entry */ + SystemCoreClock = (((HSI_VALUE) * pllmul) / plldiv); + } + else + { + /* HSE selected as PLL clock entry */ + SystemCoreClock = (((HSE_VALUE) * pllmul) / plldiv); + } + break; + default: /* MSI used as system clock */ + msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13; + SystemCoreClock = (32768 * (1 << (msirange + 1))); + break; + } + /* Compute HCLK clock frequency --------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +/** + * @brief Configures the System clock frequency, AHB/APBx prescalers and Flash + * settings. + * @note This function should be called only once the RCC clock configuration + * is reset to the default reset state (done in SystemInit() function). + * @param None + * @retval None + */ +static void SetSysClock(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable 64-bit access */ + FLASH->ACR |= FLASH_ACR_ACC64; + + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTEN; + + /* Flash 1 wait state */ + FLASH->ACR |= FLASH_ACR_LATENCY; + + /* Power enable */ + RCC->APB1ENR |= RCC_APB1ENR_PWREN; + + /* Select the Voltage Range 1 (1.8 V) */ + PWR->CR = PWR_CR_VOS_0; + + /* Wait Until the Voltage Regulator is ready */ + while((PWR->CSR & PWR_CSR_VOSF) != RESET) + { + } + + /* HCLK = SYSCLK /1*/ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK /1*/ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK /1*/ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + + /* PLL configuration */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLMUL | + RCC_CFGR_PLLDIV)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMUL12 | RCC_CFGR_PLLDIV3); + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)RCC_CFGR_SWS_PLL) + { + } + } + else + { + /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +#ifdef DATA_IN_ExtSRAM +/** + * @brief Setup the external memory controller. + * Called in SystemInit() function before jump to main. + * This function configures the external SRAM mounted on STM32L152D_EVAL board + * This SRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ +/*-- GPIOs Configuration -----------------------------------------------------*/ +/* + +-------------------+--------------------+------------------+------------------+ + + SRAM pins assignment + + +-------------------+--------------------+------------------+------------------+ + | PD0 <-> FSMC_D2 | PE0 <-> FSMC_NBL0 | PF0 <-> FSMC_A0 | PG0 <-> FSMC_A10 | + | PD1 <-> FSMC_D3 | PE1 <-> FSMC_NBL1 | PF1 <-> FSMC_A1 | PG1 <-> FSMC_A11 | + | PD4 <-> FSMC_NOE | PE7 <-> FSMC_D4 | PF2 <-> FSMC_A2 | PG2 <-> FSMC_A12 | + | PD5 <-> FSMC_NWE | PE8 <-> FSMC_D5 | PF3 <-> FSMC_A3 | PG3 <-> FSMC_A13 | + | PD8 <-> FSMC_D13 | PE9 <-> FSMC_D6 | PF4 <-> FSMC_A4 | PG4 <-> FSMC_A14 | + | PD9 <-> FSMC_D14 | PE10 <-> FSMC_D7 | PF5 <-> FSMC_A5 | PG5 <-> FSMC_A15 | + | PD10 <-> FSMC_D15 | PE11 <-> FSMC_D8 | PF12 <-> FSMC_A6 | PG10<-> FSMC_NE2 | + | PD11 <-> FSMC_A16 | PE12 <-> FSMC_D9 | PF13 <-> FSMC_A7 |------------------+ + | PD12 <-> FSMC_A17 | PE13 <-> FSMC_D10 | PF14 <-> FSMC_A8 | + | PD13 <-> FSMC_A18 | PE14 <-> FSMC_D11 | PF15 <-> FSMC_A9 | + | PD14 <-> FSMC_D0 | PE15 <-> FSMC_D12 |------------------+ + | PD15 <-> FSMC_D1 |--------------------+ + +-------------------+ +*/ + + /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ + RCC->AHBENR = 0x000080D8; + + /* Connect PDx pins to FSMC Alternate function */ + GPIOD->AFR[0] = 0x00CC00CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAA0A0A; + /* Configure PDx pins speed to 40 MHz */ + GPIOD->OSPEEDR = 0xFFFF0F0F; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FSMC Alternate function */ + GPIOE->AFR[0] = 0xC00000CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA800A; + /* Configure PEx pins speed to 40 MHz */ + GPIOE->OSPEEDR = 0xFFFFC00F; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FSMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCC0000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA000AAA; + /* Configure PFx pins speed to 40 MHz */ + GPIOF->OSPEEDR = 0xFF000FFF; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FSMC Alternate function */ + GPIOG->AFR[0] = 0x00CCCCCC; + GPIOG->AFR[1] = 0x00000C00; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0x00200AAA; + /* Configure PGx pins speed to 40 MHz */ + GPIOG->OSPEEDR = 0x00300FFF; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + +/*-- FSMC Configuration ------------------------------------------------------*/ + /* Enable the FSMC interface clock */ + RCC->AHBENR = 0x400080D8; + + /* Configure and enable Bank1_SRAM3 */ + FSMC_Bank1->BTCR[4] = 0x00001011; + FSMC_Bank1->BTCR[5] = 0x00000300; + FSMC_Bank1E->BWTR[4] = 0x0FFFFFFF; +/* + Bank1_SRAM3 is configured as follow: + + p.FSMC_AddressSetupTime = 0; + p.FSMC_AddressHoldTime = 0; + p.FSMC_DataSetupTime = 3; + p.FSMC_BusTurnAroundDuration = 0; + p.FSMC_CLKDivision = 0; + p.FSMC_DataLatency = 0; + p.FSMC_AccessMode = FSMC_AccessMode_A; + + FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM3; + FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable; + FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM; + FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b; + FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; + FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable; + FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; + FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable; + FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; + FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable; + FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable; + FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; + FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable; + FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p; + FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p; + + FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure); + + FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM3, ENABLE); +*/ + +} +#endif /* DATA_IN_ExtSRAM */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/usb_desc.c b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/usb_desc.c new file mode 100644 index 0000000..7f56731 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/usb_desc.c @@ -0,0 +1,251 @@ +/** + ****************************************************************************** + * @file usb_desc.c + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Descriptors for Audio Speaker Demo + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usb_lib.h" +#include "usb_desc.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants----------------------------------------------------------*/ +/* USB Standard Device Descriptor */ +const uint8_t Speaker_DeviceDescriptor[] = + { + SPEAKER_SIZ_DEVICE_DESC, /* bLength */ + USB_DEVICE_DESCRIPTOR_TYPE, /* bDescriptorType */ + 0x00, /* 2.00 */ /* bcdUSB */ + 0x02, + 0x00, /* bDeviceClass */ + 0x00, /* bDeviceSubClass */ + 0x00, /* bDeviceProtocol */ + 0x40, /* bMaxPacketSize 40 */ + 0x83, /* idVendor */ + 0x04, + 0x30, /* idProduct = 0x5730*/ + 0x57, + 0x00, /* 2.00 */ /* bcdDevice */ + 0x02, + 1, /* iManufacturer */ + 2, /* iProduct */ + 3, /* iSerialNumber */ + 0x01 /* bNumConfigurations */ + }; + +/* USB Configuration Descriptor */ +/* All Descriptors (Configuration, Interface, Endpoint, Class, Vendor */ +const uint8_t Speaker_ConfigDescriptor[] = + { + /* Configuration 1 */ + 0x09, /* bLength */ + USB_CONFIGURATION_DESCRIPTOR_TYPE, /* bDescriptorType */ + 0x6D, /* wTotalLength 110 bytes*/ + 0x00, + 0x02, /* bNumInterfaces */ + 0x01, /* bConfigurationValue */ + 0x00, /* iConfiguration */ + 0xC0, /* bmAttributes Self Powred*/ + 0x32, /* bMaxPower = 100 mA*/ + /* 09 byte*/ + + /* USB Speaker Standard interface descriptor */ + SPEAKER_SIZ_INTERFACE_DESC_SIZE, /* bLength */ + USB_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType */ + 0x00, /* bInterfaceNumber */ + 0x00, /* bAlternateSetting */ + 0x00, /* bNumEndpoints */ + USB_DEVICE_CLASS_AUDIO, /* bInterfaceClass */ + AUDIO_SUBCLASS_AUDIOCONTROL, /* bInterfaceSubClass */ + AUDIO_PROTOCOL_UNDEFINED, /* bInterfaceProtocol */ + 0x00, /* iInterface */ + /* 09 byte*/ + + /* USB Speaker Class-specific AC Interface Descriptor */ + SPEAKER_SIZ_INTERFACE_DESC_SIZE, /* bLength */ + AUDIO_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType */ + AUDIO_CONTROL_HEADER, /* bDescriptorSubtype */ + 0x00, /* 1.00 */ /* bcdADC */ + 0x01, + 0x27, /* wTotalLength = 39*/ + 0x00, + 0x01, /* bInCollection */ + 0x01, /* baInterfaceNr */ + /* 09 byte*/ + + /* USB Speaker Input Terminal Descriptor */ + AUDIO_INPUT_TERMINAL_DESC_SIZE, /* bLength */ + AUDIO_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType */ + AUDIO_CONTROL_INPUT_TERMINAL, /* bDescriptorSubtype */ + 0x01, /* bTerminalID */ + 0x01, /* wTerminalType AUDIO_TERMINAL_USB_STREAMING 0x0101 */ + 0x01, + 0x00, /* bAssocTerminal */ + 0x01, /* bNrChannels */ + 0x00, /* wChannelConfig 0x0000 Mono */ + 0x00, + 0x00, /* iChannelNames */ + 0x00, /* iTerminal */ + /* 12 byte*/ + + /* USB Speaker Audio Feature Unit Descriptor */ + 0x09, /* bLength */ + AUDIO_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType */ + AUDIO_CONTROL_FEATURE_UNIT, /* bDescriptorSubtype */ + 0x02, /* bUnitID */ + 0x01, /* bSourceID */ + 0x01, /* bControlSize */ + AUDIO_CONTROL_MUTE, /* bmaControls(0) */ + 0x00, /* bmaControls(1) */ + 0x00, /* iTerminal */ + /* 09 byte*/ + + /*USB Speaker Output Terminal Descriptor */ + 0x09, /* bLength */ + AUDIO_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType */ + AUDIO_CONTROL_OUTPUT_TERMINAL, /* bDescriptorSubtype */ + 0x03, /* bTerminalID */ + 0x01, /* wTerminalType 0x0301*/ + 0x03, + 0x00, /* bAssocTerminal */ + 0x02, /* bSourceID */ + 0x00, /* iTerminal */ + /* 09 byte*/ + + /* USB Speaker Standard AS Interface Descriptor - Audio Streaming Zero Bandwith */ + /* Interface 1, Alternate Setting 0 */ + SPEAKER_SIZ_INTERFACE_DESC_SIZE, /* bLength */ + USB_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType */ + 0x01, /* bInterfaceNumber */ + 0x00, /* bAlternateSetting */ + 0x00, /* bNumEndpoints */ + USB_DEVICE_CLASS_AUDIO, /* bInterfaceClass */ + AUDIO_SUBCLASS_AUDIOSTREAMING, /* bInterfaceSubClass */ + AUDIO_PROTOCOL_UNDEFINED, /* bInterfaceProtocol */ + 0x00, /* iInterface */ + /* 09 byte*/ + + /* USB Speaker Standard AS Interface Descriptor - Audio Streaming Operational */ + /* Interface 1, Alternate Setting 1 */ + SPEAKER_SIZ_INTERFACE_DESC_SIZE, /* bLength */ + USB_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType */ + 0x01, /* bInterfaceNumber */ + 0x01, /* bAlternateSetting */ + 0x01, /* bNumEndpoints */ + USB_DEVICE_CLASS_AUDIO, /* bInterfaceClass */ + AUDIO_SUBCLASS_AUDIOSTREAMING, /* bInterfaceSubClass */ + AUDIO_PROTOCOL_UNDEFINED, /* bInterfaceProtocol */ + 0x00, /* iInterface */ + /* 09 byte*/ + + /* USB Speaker Audio Streaming Interface Descriptor */ + AUDIO_STREAMING_INTERFACE_DESC_SIZE, /* bLength */ + AUDIO_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType */ + AUDIO_STREAMING_GENERAL, /* bDescriptorSubtype */ + 0x01, /* bTerminalLink */ + 0x01, /* bDelay */ + 0x02, /* wFormatTag AUDIO_FORMAT_PCM8 0x0002*/ + 0x00, + /* 07 byte*/ + + /* USB Speaker Audio Type I Format Interface Descriptor */ + 0x0B, /* bLength */ + AUDIO_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType */ + AUDIO_STREAMING_FORMAT_TYPE, /* bDescriptorSubtype */ + AUDIO_FORMAT_TYPE_I, /* bFormatType */ + 0x01, /* bNrChannels */ + 0x01, /* bSubFrameSize */ + 8, /* bBitResolution */ + 0x01, /* bSamFreqType */ + 0xF0, /* tSamFreq 22000 = 0x55F0 */ + 0x55, + 0x00, + /* 11 byte*/ + + /* Endpoint 1 - Standard Descriptor */ + AUDIO_STANDARD_ENDPOINT_DESC_SIZE, /* bLength */ + USB_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType */ + 0x01, /* bEndpointAddress 1 out endpoint*/ + USB_ENDPOINT_TYPE_ISOCHRONOUS, /* bmAttributes */ + 0x16, /* wMaxPacketSize 22 bytes*/ + 0x00, + 0x01, /* bInterval */ + 0x00, /* bRefresh */ + 0x00, /* bSynchAddress */ + /* 09 byte*/ + + /* Endpoint - Audio Streaming Descriptor*/ + AUDIO_STREAMING_ENDPOINT_DESC_SIZE, /* bLength */ + AUDIO_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType */ + AUDIO_ENDPOINT_GENERAL, /* bDescriptor */ + 0x00, /* bmAttributes */ + 0x00, /* bLockDelayUnits */ + 0x00, /* wLockDelay */ + 0x00, + /* 07 byte*/ + }; + +/* USB String Descriptor (optional) */ +const uint8_t Speaker_StringLangID[SPEAKER_SIZ_STRING_LANGID] = + { + 0x04, + 0x03, + 0x09, + 0x04 + } + ; /* LangID = 0x0409: U.S. English */ + +const uint8_t Speaker_StringVendor[SPEAKER_SIZ_STRING_VENDOR] = + { + SPEAKER_SIZ_STRING_VENDOR, /* Size of manufacturer string */ + USB_STRING_DESCRIPTOR_TYPE, /* bDescriptorType*/ + /* Manufacturer: "STMicroelectronics" */ + 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, + 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, + 'c', 0, 's', 0 + }; + +const uint8_t Speaker_StringProduct[SPEAKER_SIZ_STRING_PRODUCT] = + { + SPEAKER_SIZ_STRING_PRODUCT, /* bLength */ + USB_STRING_DESCRIPTOR_TYPE, /* bDescriptorType */ + 'S', 0, 'T', 0, 'M', 0, '3', 0, '2', 0, ' ', 0, + 'S', 0, 'p', 0, 'e', 0, 'a', 0, 'k', 0, 'e', 0, 'r', 0 + }; + +uint8_t Speaker_StringSerial[SPEAKER_SIZ_STRING_SERIAL] = + { + SPEAKER_SIZ_STRING_SERIAL, /* bLength */ + USB_STRING_DESCRIPTOR_TYPE, /* bDescriptorType */ + 'S', 0, 'T', 0, 'M', 0, '3', 0, '2', 0 + }; +/* Extern variables ----------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Extern function prototypes ------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/usb_istr.c b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/usb_istr.c new file mode 100644 index 0000000..f5786a2 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/usb_istr.c @@ -0,0 +1,248 @@ +/** + ****************************************************************************** + * @file usb_istr.c + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief ISTR events interrupt service routines + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Includes ------------------------------------------------------------------*/ +#include "usb_lib.h" +#include "usb_prop.h" +#include "usb_pwr.h" +#include "usb_istr.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +__IO uint16_t wIstr; /* ISTR register last read value */ +__IO uint8_t bIntPackSOF = 0; /* SOFs received between 2 consecutive packets */ +__IO uint32_t esof_counter =0; /* expected SOF counter */ +__IO uint32_t wCNTR=0; + +/* Extern variables ----------------------------------------------------------*/ +extern uint16_t In_Data_Offset; +extern uint16_t Out_Data_Offset; +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* function pointers to non-control endpoints service routines */ +void (*pEpInt_IN[7])(void) = + { + EP1_IN_Callback, + EP2_IN_Callback, + EP3_IN_Callback, + EP4_IN_Callback, + EP5_IN_Callback, + EP6_IN_Callback, + EP7_IN_Callback, + }; + +void (*pEpInt_OUT[7])(void) = + { + EP1_OUT_Callback, + EP2_OUT_Callback, + EP3_OUT_Callback, + EP4_OUT_Callback, + EP5_OUT_Callback, + EP6_OUT_Callback, + EP7_OUT_Callback, + }; + + +/******************************************************************************* +* Function Name : USB_Istr +* Description : ISTR events interrupt service routine +* Input : None. +* Output : None. +* Return : None. +*******************************************************************************/ +void USB_Istr(void) +{ + uint32_t i=0; + __IO uint32_t EP[8]; + + wIstr = _GetISTR(); + +#if (IMR_MSK & ISTR_CTR) + if (wIstr & ISTR_CTR & wInterrupt_Mask) + { + /* servicing of the endpoint correct transfer interrupt */ + /* clear of the CTR flag into the sub */ + CTR_LP(); + +#ifdef CTR_CALLBACK + CTR_Callback(); +#endif + } +#endif + /*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/ +#if (IMR_MSK & ISTR_RESET) + if (wIstr & ISTR_RESET & wInterrupt_Mask) + { + _SetISTR((uint16_t)CLR_RESET); + Device_Property.Reset(); +#ifdef RESET_CALLBACK + RESET_Callback(); +#endif + } +#endif + /*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/ +#if (IMR_MSK & ISTR_DOVR) + if (wIstr & ISTR_DOVR & wInterrupt_Mask) + { + _SetISTR((uint16_t)CLR_DOVR); +#ifdef DOVR_CALLBACK + DOVR_Callback(); +#endif + } +#endif + /*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/ +#if (IMR_MSK & ISTR_ERR) + if (wIstr & ISTR_ERR & wInterrupt_Mask) + { + _SetISTR((uint16_t)CLR_ERR); +#ifdef ERR_CALLBACK + ERR_Callback(); +#endif + } +#endif + /*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/ +#if (IMR_MSK & ISTR_WKUP) + if (wIstr & ISTR_WKUP & wInterrupt_Mask) + { + _SetISTR((uint16_t)CLR_WKUP); + Resume(RESUME_EXTERNAL); +#ifdef WKUP_CALLBACK + WKUP_Callback(); +#endif + } +#endif + /*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/ +#if (IMR_MSK & ISTR_SUSP) + if (wIstr & ISTR_SUSP & wInterrupt_Mask) + { + + /* check if SUSPEND is possible */ + if (fSuspendEnabled) + { + Suspend(); + } + else + { + /* if not possible then resume after xx ms */ + Resume(RESUME_LATER); + } + /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ + _SetISTR((uint16_t)CLR_SUSP); +#ifdef SUSP_CALLBACK + SUSP_Callback(); +#endif + } +#endif + /*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/ +#if (IMR_MSK & ISTR_SOF) + if (wIstr & ISTR_SOF & wInterrupt_Mask) + { + _SetISTR((uint16_t)CLR_SOF); + bIntPackSOF++; + +#ifdef SOF_CALLBACK + SOF_Callback(); +#endif + } +#endif + /*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/ +#if (IMR_MSK & ISTR_ESOF) + if (wIstr & ISTR_ESOF & wInterrupt_Mask) + { + /* clear ESOF flag in ISTR */ + _SetISTR((uint16_t)CLR_ESOF); + + if ((_GetFNR()&FNR_RXDP)!=0) + { + /* increment ESOF counter */ + esof_counter ++; + + /* test if we enter in ESOF more than 3 times with FSUSP =0 and RXDP =1=>> possible missing SUSP flag*/ + if ((esof_counter >3)&&((_GetCNTR()&CNTR_FSUSP)==0)) + { + /* this a sequence to apply a force RESET*/ + + /*Store CNTR value */ + wCNTR = _GetCNTR(); + + /*Store endpoints registers status */ + for (i=0;i<8;i++) EP[i] = _GetENDPOINT(i); + + /*apply FRES */ + wCNTR|=CNTR_FRES; + _SetCNTR(wCNTR); + + /*clear FRES*/ + wCNTR&=~CNTR_FRES; + _SetCNTR(wCNTR); + + /*poll for RESET flag in ISTR*/ + while((_GetISTR()&ISTR_RESET) == 0); + + /* clear RESET flag in ISTR */ + _SetISTR((uint16_t)CLR_RESET); + + /*restore Enpoints*/ + for (i=0;i<8;i++) + _SetENDPOINT(i, EP[i]); + + esof_counter = 0; + } + } + else + { + esof_counter = 0; + } + + /* resume handling timing is made with ESOFs */ + Resume(RESUME_ESOF); /* request without change of the machine state */ + +#ifdef ESOF_CALLBACK + ESOF_Callback(); +#endif + } +#endif +} /* USB_Istr */ + +/******************************************************************************* +* Function Name : USB_Istr +* Description : Start of frame callback function. +* Input : None. +* Output : None. +* Return : None. +*******************************************************************************/ +void SOF_Callback(void) +{ + In_Data_Offset = 0; + Out_Data_Offset = 0; +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/usb_pwr.c b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/usb_pwr.c new file mode 100644 index 0000000..a2253a8 --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Audio_Speaker/src/usb_pwr.c @@ -0,0 +1,318 @@ +/** + ****************************************************************************** + * @file usb_pwr.c + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Connection/disconnection & power management + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +/* Includes ------------------------------------------------------------------*/ +#include "usb_lib.h" +#include "usb_conf.h" +#include "usb_pwr.h" +#include "hw_config.h" + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +__IO uint32_t bDeviceState = UNCONNECTED; /* USB device status */ +__IO bool fSuspendEnabled = TRUE; /* true when suspend is possible */ +__IO uint32_t EP[8]; + +struct +{ + __IO RESUME_STATE eState; + __IO uint8_t bESOFcnt; +} +ResumeS; + +__IO uint32_t remotewakeupon=0; + +/* Extern variables ----------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Extern function prototypes ------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/******************************************************************************* +* Function Name : PowerOn +* Description : +* Input : None. +* Output : None. +* Return : USB_SUCCESS. +*******************************************************************************/ +RESULT PowerOn(void) +{ + uint16_t wRegVal; + + /*** cable plugged-in ? ***/ + USB_Cable_Config(ENABLE); + + /*** CNTR_PWDN = 0 ***/ + wRegVal = CNTR_FRES; + _SetCNTR(wRegVal); + + /*** CNTR_FRES = 0 ***/ + wInterrupt_Mask = 0; + _SetCNTR(wInterrupt_Mask); + /*** Clear pending interrupts ***/ + _SetISTR(0); + /*** Set interrupt mask ***/ + wInterrupt_Mask = CNTR_RESETM | CNTR_SUSPM | CNTR_WKUPM; + _SetCNTR(wInterrupt_Mask); + + return USB_SUCCESS; +} + +/******************************************************************************* +* Function Name : PowerOff +* Description : handles switch-off conditions +* Input : None. +* Output : None. +* Return : USB_SUCCESS. +*******************************************************************************/ +RESULT PowerOff() +{ + /* disable all interrupts and force USB reset */ + _SetCNTR(CNTR_FRES); + /* clear interrupt status register */ + _SetISTR(0); + /* Disable the Pull-Up*/ + USB_Cable_Config(DISABLE); + /* switch-off device */ + _SetCNTR(CNTR_FRES + CNTR_PDWN); + /* sw variables reset */ + /* ... */ + + return USB_SUCCESS; +} + +/******************************************************************************* +* Function Name : Suspend +* Description : sets suspend mode operating conditions +* Input : None. +* Output : None. +* Return : USB_SUCCESS. +*******************************************************************************/ +void Suspend(void) +{ + uint32_t i =0; + uint16_t wCNTR; + uint32_t tmpreg = 0; + __IO uint32_t savePWR_CR=0; + /* suspend preparation */ + /* ... */ + + /*Store CNTR value */ + wCNTR = _GetCNTR(); + + /* This a sequence to apply a force RESET to handle a robustness case */ + + /*Store endpoints registers status */ + for (i=0;i<8;i++) EP[i] = _GetENDPOINT(i); + + /* unmask RESET flag */ + wCNTR|=CNTR_RESETM; + _SetCNTR(wCNTR); + + /*apply FRES */ + wCNTR|=CNTR_FRES; + _SetCNTR(wCNTR); + + /*clear FRES*/ + wCNTR&=~CNTR_FRES; + _SetCNTR(wCNTR); + + /*poll for RESET flag in ISTR*/ + while((_GetISTR()&ISTR_RESET) == 0); + + /* clear RESET flag in ISTR */ + _SetISTR((uint16_t)CLR_RESET); + + /*restore Enpoints*/ + for (i=0;i<8;i++) + _SetENDPOINT(i, EP[i]); + + /* Now it is safe to enter macrocell in suspend mode */ + wCNTR |= CNTR_FSUSP; + _SetCNTR(wCNTR); + + /* force low-power mode in the macrocell */ + wCNTR = _GetCNTR(); + wCNTR |= CNTR_LPMODE; + _SetCNTR(wCNTR); + + /*prepare entry in low power mode (STOP mode)*/ + /* Select the regulator state in STOP mode*/ + savePWR_CR = PWR->CR; + tmpreg = PWR->CR; + /* Clear PDDS and LPDS bits */ + tmpreg &= ((uint32_t)0xFFFFFFFC); + /* Set LPDS bit according to PWR_Regulator value */ + tmpreg |= PWR_Regulator_LowPower; + /* Store the new value */ + PWR->CR = tmpreg; + /* Set SLEEPDEEP bit of Cortex System Control Register */ +#if defined (STM32F30X) || defined (STM32F37X) + SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; +#else + SCB->SCR |= SCB_SCR_SLEEPDEEP; +#endif + + /* enter system in STOP mode, only when wakeup flag in not set */ + if((_GetISTR()&ISTR_WKUP)==0) + { + __WFI(); + /* Reset SLEEPDEEP bit of Cortex System Control Register */ +#if defined (STM32F30X) || defined (STM32F37X) + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); +#else + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP); +#endif + } + else + { + /* Clear Wakeup flag */ + _SetISTR(CLR_WKUP); + /* clear FSUSP to abort entry in suspend mode */ + wCNTR = _GetCNTR(); + wCNTR&=~CNTR_FSUSP; + _SetCNTR(wCNTR); + + /*restore sleep mode configuration */ + /* restore Power regulator config in sleep mode*/ + PWR->CR = savePWR_CR; + + /* Reset SLEEPDEEP bit of Cortex System Control Register */ +#if defined (STM32F30X) || defined (STM32F37X) + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk); +#else + SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP); +#endif + } +} + +/******************************************************************************* +* Function Name : Resume_Init +* Description : Handles wake-up restoring normal operations +* Input : None. +* Output : None. +* Return : USB_SUCCESS. +*******************************************************************************/ +void Resume_Init(void) +{ + uint16_t wCNTR; + + /* ------------------ ONLY WITH BUS-POWERED DEVICES ---------------------- */ + /* restart the clocks */ + /* ... */ + + /* CNTR_LPMODE = 0 */ + wCNTR = _GetCNTR(); + wCNTR &= (~CNTR_LPMODE); + _SetCNTR(wCNTR); + + /* restore full power */ + /* ... on connected devices */ + Leave_LowPowerMode(); + + /* reset FSUSP bit */ + _SetCNTR(IMR_MSK); + + /* reverse suspend preparation */ + /* ... */ + +} + +/******************************************************************************* +* Function Name : Resume +* Description : This is the state machine handling resume operations and +* timing sequence. The control is based on the Resume structure +* variables and on the ESOF interrupt calling this subroutine +* without changing machine state. +* Input : a state machine value (RESUME_STATE) +* RESUME_ESOF doesn't change ResumeS.eState allowing +* decrementing of the ESOF counter in different states. +* Output : None. +* Return : None. +*******************************************************************************/ +void Resume(RESUME_STATE eResumeSetVal) +{ + uint16_t wCNTR; + + if (eResumeSetVal != RESUME_ESOF) + ResumeS.eState = eResumeSetVal; + switch (ResumeS.eState) + { + case RESUME_EXTERNAL: + if (remotewakeupon ==0) + { + Resume_Init(); + ResumeS.eState = RESUME_OFF; + } + else /* RESUME detected during the RemoteWAkeup signalling => keep RemoteWakeup handling*/ + { + ResumeS.eState = RESUME_ON; + } + break; + case RESUME_INTERNAL: + Resume_Init(); + ResumeS.eState = RESUME_START; + remotewakeupon = 1; + break; + case RESUME_LATER: + ResumeS.bESOFcnt = 2; + ResumeS.eState = RESUME_WAIT; + break; + case RESUME_WAIT: + ResumeS.bESOFcnt--; + if (ResumeS.bESOFcnt == 0) + ResumeS.eState = RESUME_START; + break; + case RESUME_START: + wCNTR = _GetCNTR(); + wCNTR |= CNTR_RESUME; + _SetCNTR(wCNTR); + ResumeS.eState = RESUME_ON; + ResumeS.bESOFcnt = 10; + break; + case RESUME_ON: + ResumeS.bESOFcnt--; + if (ResumeS.bESOFcnt == 0) + { + wCNTR = _GetCNTR(); + wCNTR &= (~CNTR_RESUME); + _SetCNTR(wCNTR); + ResumeS.eState = RESUME_OFF; + remotewakeupon = 0; + } + break; + case RESUME_OFF: + case RESUME_ESOF: + default: + ResumeS.eState = RESUME_OFF; + break; + } +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3