From 40e04e3772726829d66c12e69f24b03920d79c67 Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Wed, 25 Jan 2017 22:24:18 +0100 Subject: o Moving tinyprintf and stm libraries under thirdparty. --- .../Projects/Composite_Example/readme.txt | 177 +++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100644 thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Composite_Example/readme.txt (limited to 'thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Composite_Example/readme.txt') diff --git a/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Composite_Example/readme.txt b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Composite_Example/readme.txt new file mode 100644 index 0000000..38afddb --- /dev/null +++ b/thirdparty/STM32_USB-FS-Device_Lib_V4.0.0/Projects/Composite_Example/readme.txt @@ -0,0 +1,177 @@ +/** + ****************************************************************************** + * @file readme.txt + * @author MCD Application Team + * @version V4.0.0 + * @date 21-January-2013 + * @brief Description of the Composite Example Demo. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2013 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + + +Example description +=================== +This Demo provides a description of how to use the USB-FS-Device on the STM32F10xxx, +STM32F37xxx, STM32F30xxx and STM32L15xxx devices. +The examples provide a composite device +A composite device is one that has multiple interfaces controlled independently of each other. +Using composite device, multiple functions are combined into a single device. +In this Example the independent interfaces are : Mass Storage (MSC) and Custom HID + +LED1,LED2 and LED3 are reserved for Custom HID demo +LED4 reserved for MSC, it is ON when MicroSD is Ready for write and read operations. + +When even one of the interface class of the device is changed, it should be handled +differently by Windows. However, it doesn't recognize the modification. To avoid conflict on +Windows, we suggest to assign another VID/PID to the device (idProduct = 0x5750) or +delete device instance from device manager. + +More details about this Demo implementation is given in the User manual +"UM0424 STM32F10xxx USB development kit", available for download from the ST +microcontrollers website: www.st.com/stm32 + + +Directory contents +================== + + \inc: contains the Demo firmware header files + + \EWARM: contains preconfigured projects for EWARM toolchain + + \RIDE: contains preconfigured projects for RIDE toolchain + + \MDK-ARM: contains preconfigured projects for MDK-ARM toolchain + + \TASKING: contains preconfigured projects for TASKING toolchain + + \TrueSTUDIO: contains preconfigured projects for TrueSTUDIO toolchain + + \src: contains the Demo firmware source files + + +Hardware environment +==================== +This example runs these STMicroelectronics evaluation boards and can be easily tailored to any other hardware: + +- STM3210B-EVAL +- STM3210E-EVAL +- STM32L152-EVAL +- STM32F373C_EVAL +- STM32F303C_EVAL +- STM32L152D-EVAL + +To select the STMicroelectronics evaluation board used to run the example, uncomment +the corresponding line in platform_config.h file. + + - STM3210B-EVAL Set-up + - Jumper JP1 (USB disconnect) should be connected in position 2-3. + + - STM3210E-EVAL Set-up + - Jumper JP14 (USB disconnect) should be connected in position 2-3. + + - STM32L152-EVAL Set-up + - Jumpers JP18 and JP19 should be connected. + - Jumper JP17 should be connected in position 5-6 (PB12 connector) + - Note that JoySitck Right and Left buttons are used for this Demo. + + - STM32L152D-EVAL Set-up + - LCD Glass should be mounted On IO position for Potentiometer usage. + - JP13 should be connected to ADC input. + + - STM32F373C_EVAL Set-up + - None. + + - STM32F303C_EVAL Set-up + - None. + +How to use it +============= + + EWARM + - Open the Composite_Example.eww workspace. + - In the workspace toolbar select the project config: + - STM3210B-EVAL: to configure the project for STM32 Medium-density devices + - STM3210E-EVAL: to configure the project for STM32 High-density devices + - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices + - STM32L152-EVAL: to configure the project for STM32 Medium-Density Low-Power devices + - STM32L152D-EVAL: to configure the project for STM32 High-Density Low-Power devices + - STM32373C-EVAL: to configure the project for STM32F37xxx devices + - STM32303C-EVAL: to configure the project for STM32F30xxx devices + - Rebuild all files: Project->Rebuild all + - Load project image: Project->Debug + - Run program: Debug->Go(F5) + + + MDK-ARM + - Open the Composite_Example.Uv2 project + - In the build toolbar select the project config: + - STM3210B-EVAL: to configure the project for STM32 Medium-density devices + - STM3210E-EVAL: to configure the project for STM32 High-density devices + - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices + - STM32L152-EVAL: to configure the project for STM32 Medium-Density Low-Power devices + - STM32L152D-EVAL: to configure the project for STM32 High-Density Low-Power devices + - STM32373C-EVAL: to configure the project for STM32F37xxx devices + - STM32303C-EVAL: to configure the project for STM32F30xxx devices + - Rebuild all files: Project->Rebuild all target files + - Load project image: Debug->Start/Stop Debug Session + - Run program: Debug->Run (F5) + + + RIDE + - Open the Composite_Example.rprj project. + - In the configuration toolbar(Project->properties) select the project config: + - STM3210B-EVAL: to configure the project for STM32 Medium-density devices + - STM3210E-EVAL: to configure the project for STM32 High-density devices + - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices + - STM32L152-EVAL: to configure the project for STM32 Medium-Density Low-Power devices + - STM32L152D-EVAL: to configure the project for STM32 High-Density Low-Power devices + - STM32373C-EVAL: to configure the project for STM32F37xxx devices + - STM32303C-EVAL: to configure the project for STM32F30xxx devices + - Rebuild all files: Project->build project + - Load project image: Debug->start(ctrl+D) + - Run program: Debug->Run(ctrl+F9) + + + TASKING + - Open TASKING toolchain. + - Click on File->Import, select General->'Existing Projects into Workspace' + and then click "Next". + - Browse to TASKING workspace directory and select the project: + - STM3210B-EVAL: to configure the project for STM32 Medium-density devices + - STM3210E-EVAL: to configure the project for STM32 High-density devices + - STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices + - STM32L152-EVAL: to configure the project for STM32 Medium-Density Low-Power devices + - STM32L152D-EVAL: to configure the project for STM32 High-Density Low-Power devices + - STM32373C-EVAL: to configure the project for STM32F37xxx devices + - STM32303C-EVAL: to configure the project for STM32F30xxx devices + - Rebuild all project files: Select the project in the "Project explorer" + window then click on Project->build project menu. + - Run program: Select the project in the "Project explorer" window then click + Run->Debug (F11) + + + TrueSTUDIO + - Open the TrueSTUDIO toolchain. + - Click on File->Switch Workspace->Other and browse to TrueSTUDIO workspace + directory. + - Click on File->Import, select General->'Existing Projects into Workspace' + and then click "Next". + - Browse to the TrueSTUDIO workspace directory and select the project: + - STM3210B-EVAL: to load the project for STM32 Medium-density devices + - STM3210E-EVAL: to load the project for STM32 High-density devices + - STM3210E_EVAL_XL: to load the project for STM32 XL-density devices + - STM32L152_EVAL: to load the project for STM32 Medium-Density Low-Power devices + - STM32L152D-EVAL: to configure the project for STM32 High-Density Low-Power devices + - STM32373C-EVAL: to configure the project for STM32F37xxx devices + - STM32303C-EVAL: to configure the project for STM32F30xxx devices + - Rebuild all project files: Select the project in the "Project explorer" + window then click on Project->build project menu. + - Run program: Select the project in the "Project explorer" window then click + Run->Debug (F11) + +************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****** -- cgit v1.2.3