+ + + + + + +

+ + + + + + + + + +

Release +Notes for STM32F10x Standard Peripherals Library Drivers +(StdPeriph_Driver)

+ + + + + + +

STM32F10x Standard Peripherals Library +Drivers update History
License

+ + +

STM32F10x Standard +Peripherals Library Drivers update History

V3.5.0 / 11-March-2011

Main +Changes

+ +

stm32f10x_can.h/.c files:

Add 5 new functions

3 +new functions controlling the counter errors: CAN_GetLastErrorCode(), +CAN_GetReceiveErrorCounter() and CAN_GetLSBTransmitErrorCounter().

1 new function to select the CAN operating mode: CAN_OperatingModeRequest().

1 new function to support CAN TT mode: CAN_TTComModeCmd().
+

CAN_TransmitStatus() function updated to support all CAN transmit intermediate states
+

stm32f10x_i2c.h/.c files:

Add 1 new function:

I2C_NACKPositionConfig(): +This function configures the same bit (POS) as I2C_PECPositionConfig() +but is intended to be used in I2C mode while I2C_PECPositionConfig() is +intended to used in SMBUS mode.

stm32f10x_tim.h/.c files:

Change the TIM_DMABurstLength_xBytes definitions to TIM_DMABurstLength_xTansfers
+

+ +

3.4.0 +- 10/15/2010

+ +

General

+ +

Add support for STM32F10x High-density value line devices.

+ +

STM32F10x_StdPeriph_Driver

+ + +

stm32f10x_bkp.h/.c

Delete BKP registers definition from stm32f10x_bkp.c and use defines within stm32f10x.h file.

stm32f10x_can.h/.c

Delete CAN registers definition from stm32f10x_can.c and use defines within stm32f10x.h file.
+
Update the wording of some defines and Asserts macro.
+
CAN_GetFlagStatus() +and CAN_ClearFlag() functions: updated to support new flags (were not +supported in previous version). These flags are: CAN_FLAG_RQCP0, +CAN_FLAG_RQCP1, CAN_FLAG_RQCP2, CAN_FLAG_FMP1, CAN_FLAG_FF1, +CAN_FLAG_FOV1, CAN_FLAG_FMP0, CAN_FLAG_FF0, CAN_FLAG_FOV0, +CAN_FLAG_WKU, CAN_FLAG_SLAK and CAN_FLAG_LEC.
+
CAN_GetITStatus() +function: add a check of the interrupt enable bit before getting the +status of corresponding interrupt pending bit.
+
CAN_ClearITPendingBit() function: correct the procedure to clear the interrupt pending bit.
+

stm32f10x_crc.h/.c

Delete CRC registers definition from stm32f10x_crc.c and use defines within stm32f10x.h file.

stm32f10x_dac.h/.c

Delete DAC registers definition from stm32f10x_dac.c and use defines within stm32f10x.h file.

stm32f10x_dbgmcu.h/.c

Delete DBGMCU registers definition from stm32f10x_dbgmcu.c and use defines within stm32f10x.h file.

stm32f10x_dma.h/.c

Delete DMA registers definition from stm32f10x_dma.c and use defines within stm32f10x.h file.
Add new function "void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber);"
+

stm32f10x_flash.h/.c

FLASH functions (Erase and Program) updated to always clear the "PG", "MER" and "PER" bits even in case of TimeOut Error.

stm32f10x_fsmc.h/.c

Add new member "FSMC_AsynchronousWait" in "FSMC_NORSRAMInitTypeDef" structure.

stm32f10x_gpio.h/.c

GPIO_PinRemapConfig() function: add new values for GPIO_Remap parameter, to support new remap for TIM6, TIM7 and DAC DMA requests, TIM12 and DAC Triggers / DMA2_Channel5 Interrupt mapping.

stm32f10x_pwr.h/.c

Delete PWR registers definition from stm32f10x_pwr.c and use defines within stm32f10x.h and core_cm3.h files.

stm32f10x_rtc.h/.c

Delete RTC registers definition from stm32f10x_rtc.c and use defines within stm32f10x.h file.

stm32f10x_spi.h/.c

Add new definition for I2S Audio Clock frequencies "I2S_AudioFreq_192k".

stm32f10x_tim.h/.c

Add new definition for TIM Input Capture Polarity "TIM_ICPolarity_BothEdge".

+ +

3.3.0 +- 04/16/2010

+ +

General

Add support for STM32F10x XL-density devices.
I2C driver: events description and management enhancement.

STM32F10x_StdPeriph_Driver

stm32f10x_dbgmcu.h/.c

DBGMCU_Config() function: add new values DBGMCU_TIMx_STOP (x: 9..14) for DBGMCU_Periph parameter.

stm32f10x_flash.h/.c: +updated to support Bank2 of XL-density devices (up to 1MByte of Flash +memory). For more details, refer to the description provided within +stm32f10x_flash.c file.
stm32f10x_gpio.h/.c

GPIO_PinRemapConfig() function: add new values for GPIO_Remap parameter, to support new remap for FSMC_NADV pin and TIM9..11,13,14.

stm32f10x_i2c.h/.c: I2C events description and management enhancement.

I2C_CheckEvent() +function: updated to check whether the last event contains the +I2C_EVENT (instead of check whether the last event is equal to +I2C_EVENT)

Add +detailed description of I2C events and how to manage them using the +functions provided by this driver. For more information, refer to +stm32f10x_i2c.h and stm32f10x_i2c.c files.

stm32f10x_rcc.h/.c: updated to support TIM9..TIM14 APB clock and reset configuration
stm32f10x_tim.h/.c: updated to support new Timers TIM9..TIM14.
stm32f10x_sdio.h:

SDIO_SetSDIOReadWaitMode() function: correct values of SDIO_ReadWaitMode parameter
change
+#define +SDIO_ReadWaitMode_CLK               + ((uint32_t)0x00000000)
#define +SDIO_ReadWaitMode_DATA2             +((uint32_t)0x00000001)
by
#define +SDIO_ReadWaitMode_CLK               + ((uint32_t)0x00000001)
#define +SDIO_ReadWaitMode_DATA2             +((uint32_t)0x00000000)

3.2.0 +- 03/01/2010

General

Add support +for STM32 Low-density Value line (STM32F100x4/6) and +Medium-density Value line (STM32F100x8/B) devices.
Almost +peripherals drivers were updated to support Value +line devices features
Drivers limitations fix and enhancements.

STM32F10x_StdPeriph_Driver

Add new +firmware driver for CEC peripheral: stm32f10x_cec.h and stm32f10x_cec.c
Timers drivers stm32f10x_tim.h/.c: add support for new General Purpose Timers: TIM15, TIM16 and TIM17.
RCC driver: add support for new Value peripherals: HDMI-CEC, TIM15, TIM16 and TIM17.
GPIO driver: add new remap parameters for TIM1, TIM15, TIM16, TIM17 and HDMI-CEC: GPIO_Remap_TIM1_DMA, GPIO_Remap_TIM15, GPIO_Remap_TIM16, GPIO_Remap_TIM17, GPIO_Remap_CEC.
USART +driver: add support for Oversampling by 8 mode and onebit method. 2 +functions has been added: USART_OverSampling8Cmd() and +USART_OneBitMethodCmd().
+
DAC +driver: add new functions handling the DAC under run feature: +DAC_ITConfig(), DAC_GetFlagStatus(), DAC_ClearFlag(), DAC_GetITStatus() +and DAC_ClearITPendingBit().
DBGMCU driver: add new parameters for TIM15, TIM16 and TIM17: DBGMCU_TIM15_STOP, DBGMCU_TIM16_STOP, DBGMCU_TIM17_STOP.
+
FLASH +driver: the FLASH_EraseOptionBytes() function updated. This is now just +erasing the option bytes without modifying the RDP status either +enabled or disabled.
PWR +driver: the PWR_EnterSTOPMode() function updated. When woken up from +STOP mode, this function resets again the SLEEPDEEP bit in the +Cortex-M3 System Control register to allow Sleep mode entering.

License

The +enclosed firmware and all the related documentation are not covered by +a License Agreement, if you need such License you can contact your +local STMicroelectronics office.

THE +PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO +SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR +ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY +CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY +CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH +THEIR PRODUCTS.

For +complete documentation on STM32(CORTEX M3) 32-Bit Microcontrollers +visit www.st.com/STM32