From afbb4cc73c44b6321cae39dbe46b97155805097d Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Sun, 13 Dec 2015 21:03:11 +0100 Subject: wip --- .../ADC/AnalogWatchdog/main.c | 201 +++++++++++++++++++++ 1 file changed, 201 insertions(+) create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/main.c (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/main.c') diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/main.c new file mode 100644 index 0000000..dc60ca0 --- /dev/null +++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/ADC/AnalogWatchdog/main.c @@ -0,0 +1,201 @@ +/** + ****************************************************************************** + * @file ADC/AnalogWatchdog/main.c + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Main program body + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" +#include "stm32_eval.h" + +/** @addtogroup STM32F10x_StdPeriph_Examples + * @{ + */ + +/** @addtogroup ADC_AnalogWatchdog + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +ADC_InitTypeDef ADC_InitStructure; + +/* Private function prototypes -----------------------------------------------*/ +void RCC_Configuration(void); +void GPIO_Configuration(void); +void NVIC_Configuration(void); + +/* Private functions ---------------------------------------------------------*/ + +/** + * @brief Main program + * @param None + * @retval None + */ +int main(void) +{ + /*!< At this stage the microcontroller clock setting is already configured, + this is done through SystemInit() function which is called from startup + file (startup_stm32f10x_xx.s) before to branch to application main. + To reconfigure the default setting of SystemInit() function, refer to + system_stm32f10x.c file + */ + + /* System clocks configuration ---------------------------------------------*/ + RCC_Configuration(); + + /* NVIC configuration ------------------------------------------------------*/ + NVIC_Configuration(); + + /* GPIO configuration ------------------------------------------------------*/ + GPIO_Configuration(); + + /* Configure LED GPIO Pin ------------------------------------------------- */ + STM_EVAL_LEDInit(LED1); + + /* ADC1 Configuration ------------------------------------------------------*/ + ADC_InitStructure.ADC_Mode = ADC_Mode_Independent; + ADC_InitStructure.ADC_ScanConvMode = DISABLE; + ADC_InitStructure.ADC_ContinuousConvMode = ENABLE; + ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None; + ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right; + ADC_InitStructure.ADC_NbrOfChannel = 1; + ADC_Init(ADC1, &ADC_InitStructure); + + /* ADC1 regular channel14 configuration */ + ADC_RegularChannelConfig(ADC1, ADC_Channel_14, 1, ADC_SampleTime_13Cycles5); + + /* Configure high and low analog watchdog thresholds */ + ADC_AnalogWatchdogThresholdsConfig(ADC1, 0x0B00, 0x0300); + /* Configure channel14 as the single analog watchdog guarded channel */ + ADC_AnalogWatchdogSingleChannelConfig(ADC1, ADC_Channel_14); + /* Enable analog watchdog on one regular channel */ + ADC_AnalogWatchdogCmd(ADC1, ADC_AnalogWatchdog_SingleRegEnable); + + /* Enable AWD interrupt */ + ADC_ITConfig(ADC1, ADC_IT_AWD, ENABLE); + + /* Enable ADC1 */ + ADC_Cmd(ADC1, ENABLE); + + /* Enable ADC1 reset calibration register */ + ADC_ResetCalibration(ADC1); + /* Check the end of ADC1 reset calibration register */ + while(ADC_GetResetCalibrationStatus(ADC1)); + + /* Start ADC1 calibration */ + ADC_StartCalibration(ADC1); + /* Check the end of ADC1 calibration */ + while(ADC_GetCalibrationStatus(ADC1)); + + /* Start ADC1 Software Conversion */ + ADC_SoftwareStartConvCmd(ADC1, ENABLE); + + while (1) + { + } +} + +/** + * @brief Configures the different system clocks. + * @param None + * @retval None + */ +void RCC_Configuration(void) +{ +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + /* ADCCLK = PCLK2/2 */ + RCC_ADCCLKConfig(RCC_PCLK2_Div2); +#else + /* ADCCLK = PCLK2/4 */ + RCC_ADCCLKConfig(RCC_PCLK2_Div4); +#endif +/* Enable peripheral clocks --------------------------------------------------*/ + /* Enable ADC1 and GPIO_LED clock */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE); +} + +/** + * @brief Configures the different GPIO ports. + * @param None + * @retval None + */ +void GPIO_Configuration(void) +{ + GPIO_InitTypeDef GPIO_InitStructure; + + /* Configure PC.04 (ADC Channel14) as analog input -------------------------*/ + GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN; + GPIO_Init(GPIOC, &GPIO_InitStructure); +} + +/** + * @brief Configures NVIC and Vector Table base location. + * @param None + * @retval None + */ +void NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + + /* Configure and enable ADC interrupt */ +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + NVIC_InitStructure.NVIC_IRQChannel = ADC1_IRQn; +#else + NVIC_InitStructure.NVIC_IRQChannel = ADC1_2_IRQn; +#endif + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +} + +#ifdef USE_FULL_ASSERT + +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t* file, uint32_t line) +{ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + + /* Infinite loop */ + while (1) + { + } +} + +#endif + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3