From afbb4cc73c44b6321cae39dbe46b97155805097d Mon Sep 17 00:00:00 2001
From: Trygve Laugstøl <trygvis@inamo.no>
Date: Sun, 13 Dec 2015 21:03:11 +0100
Subject: wip

---
 .../DAC/DualModeDMA_SineWave/main.c                |  238 +++++
 .../DAC/DualModeDMA_SineWave/readme.txt            |  104 ++
 .../DAC/DualModeDMA_SineWave/stm32f10x_conf.h      |   77 ++
 .../DAC/DualModeDMA_SineWave/stm32f10x_it.c        |  167 +++
 .../DAC/DualModeDMA_SineWave/stm32f10x_it.h        |   46 +
 .../DAC/DualModeDMA_SineWave/system_stm32f10x.c    | 1094 ++++++++++++++++++++
 .../DAC/OneChannelDMA_Escalator/main.c             |  212 ++++
 .../DAC/OneChannelDMA_Escalator/readme.txt         |   99 ++
 .../DAC/OneChannelDMA_Escalator/stm32f10x_conf.h   |   77 ++
 .../DAC/OneChannelDMA_Escalator/stm32f10x_it.c     |  167 +++
 .../DAC/OneChannelDMA_Escalator/stm32f10x_it.h     |   46 +
 .../DAC/OneChannelDMA_Escalator/system_stm32f10x.c | 1094 ++++++++++++++++++++
 .../DAC/OneChannel_NoiseWave/main.c                |  161 +++
 .../DAC/OneChannel_NoiseWave/readme.txt            |   99 ++
 .../DAC/OneChannel_NoiseWave/stm32f10x_conf.h      |   77 ++
 .../DAC/OneChannel_NoiseWave/stm32f10x_it.c        |  167 +++
 .../DAC/OneChannel_NoiseWave/stm32f10x_it.h        |   46 +
 .../DAC/OneChannel_NoiseWave/system_stm32f10x.c    | 1094 ++++++++++++++++++++
 .../DAC/TwoChannels_TriangleWave/main.c            |  184 ++++
 .../DAC/TwoChannels_TriangleWave/readme.txt        |  105 ++
 .../DAC/TwoChannels_TriangleWave/stm32f10x_conf.h  |   77 ++
 .../DAC/TwoChannels_TriangleWave/stm32f10x_it.c    |  168 +++
 .../DAC/TwoChannels_TriangleWave/stm32f10x_it.h    |   46 +
 .../TwoChannels_TriangleWave/system_stm32f10x.c    | 1094 ++++++++++++++++++++
 24 files changed, 6739 insertions(+)
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/main.c
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/readme.txt
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/stm32f10x_conf.h
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/stm32f10x_it.c
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/stm32f10x_it.h
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/system_stm32f10x.c
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/main.c
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/readme.txt
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/stm32f10x_conf.h
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/stm32f10x_it.c
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/stm32f10x_it.h
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/system_stm32f10x.c
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/main.c
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/readme.txt
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/stm32f10x_conf.h
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/stm32f10x_it.c
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/stm32f10x_it.h
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/system_stm32f10x.c
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/main.c
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/readme.txt
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/stm32f10x_conf.h
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/stm32f10x_it.c
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/stm32f10x_it.h
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/system_stm32f10x.c

(limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC')

diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/main.c
new file mode 100644
index 0000000..6d0ed97
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/main.c
@@ -0,0 +1,238 @@
+/**
+  ******************************************************************************
+  * @file    DAC/DualModeDMA_SineWave/main.c 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Main program body.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Examples
+  * @{
+  */
+
+/** @addtogroup DAC_DualModeDMA_SineWave
+  * @{
+  */ 
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define DAC_DHR12RD_Address      0x40007420
+
+/* Init Structure definition */
+DAC_InitTypeDef            DAC_InitStructure;
+DMA_InitTypeDef            DMA_InitStructure;
+TIM_TimeBaseInitTypeDef    TIM_TimeBaseStructure;
+uint32_t Idx = 0;  
+  
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+const uint16_t Sine12bit[32] = {
+                      2047, 2447, 2831, 3185, 3498, 3750, 3939, 4056, 4095, 4056,
+                      3939, 3750, 3495, 3185, 2831, 2447, 2047, 1647, 1263, 909, 
+                      599, 344, 155, 38, 0, 38, 155, 344, 599, 909, 1263, 1647};
+
+uint32_t DualSine12bit[32];
+
+/* Private function prototypes -----------------------------------------------*/
+void RCC_Configuration(void);
+void GPIO_Configuration(void);
+void Delay(__IO uint32_t nCount);
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @brief   Main program.
+  * @param  None
+  * @retval None
+  */
+int main(void)
+{
+  /*!< At this stage the microcontroller clock setting is already configured, 
+       this is done through SystemInit() function which is called from startup
+       file (startup_stm32f10x_xx.s) before to branch to application main.
+       To reconfigure the default setting of SystemInit() function, refer to
+       system_stm32f10x.c file
+     */     
+	  
+  
+  /* System Clocks Configuration */
+  RCC_Configuration();   
+
+  /* Once the DAC channel is enabled, the corresponding GPIO pin is automatically 
+     connected to the DAC converter. In order to avoid parasitic consumption, 
+     the GPIO pin should be configured in analog */
+  GPIO_Configuration();
+
+  /* TIM2 Configuration */
+  /* Time base configuration */
+  TIM_TimeBaseStructInit(&TIM_TimeBaseStructure); 
+  TIM_TimeBaseStructure.TIM_Period = 0x19;          
+  TIM_TimeBaseStructure.TIM_Prescaler = 0x0;       
+  TIM_TimeBaseStructure.TIM_ClockDivision = 0x0;    
+  TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;  
+  TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
+
+  /* TIM2 TRGO selection */
+  TIM_SelectOutputTrigger(TIM2, TIM_TRGOSource_Update);
+
+  /* DAC channel1 Configuration */
+  DAC_InitStructure.DAC_Trigger = DAC_Trigger_T2_TRGO;
+  DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;
+  DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Disable;
+  DAC_Init(DAC_Channel_1, &DAC_InitStructure);
+
+  /* DAC channel2 Configuration */
+  DAC_Init(DAC_Channel_2, &DAC_InitStructure);
+
+  /* Fill Sine32bit table */
+  for (Idx = 0; Idx < 32; Idx++)
+  {
+    DualSine12bit[Idx] = (Sine12bit[Idx] << 16) + (Sine12bit[Idx]);
+  }
+
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL
+  /* DMA2 channel4 configuration */
+  DMA_DeInit(DMA2_Channel4);
+#else
+  /* DMA1 channel4 configuration */
+  DMA_DeInit(DMA1_Channel4);
+#endif
+  DMA_InitStructure.DMA_PeripheralBaseAddr = DAC_DHR12RD_Address;
+  DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)&DualSine12bit;
+  DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
+  DMA_InitStructure.DMA_BufferSize = 32;
+  DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
+  DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
+  DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word;
+  DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Word;
+  DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
+  DMA_InitStructure.DMA_Priority = DMA_Priority_High;
+  DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
+
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL
+  DMA_Init(DMA2_Channel4, &DMA_InitStructure);
+  /* Enable DMA2 Channel4 */
+  DMA_Cmd(DMA2_Channel4, ENABLE);
+#else
+  DMA_Init(DMA1_Channel4, &DMA_InitStructure);
+  /* Enable DMA1 Channel4 */
+  DMA_Cmd(DMA1_Channel4, ENABLE);
+#endif
+
+  /* Enable DAC Channel1: Once the DAC channel1 is enabled, PA.04 is 
+     automatically connected to the DAC converter. */
+  DAC_Cmd(DAC_Channel_1, ENABLE);
+  /* Enable DAC Channel2: Once the DAC channel2 is enabled, PA.05 is 
+     automatically connected to the DAC converter. */
+  DAC_Cmd(DAC_Channel_2, ENABLE);
+
+  /* Enable DMA for DAC Channel2 */
+  DAC_DMACmd(DAC_Channel_2, ENABLE);
+
+  /* TIM2 enable counter */
+  TIM_Cmd(TIM2, ENABLE);
+
+  while (1)
+  {
+  }
+}
+
+
+/**
+  * @brief  Configures the different system clocks.
+  * @param  None
+  * @retval None
+  */
+void RCC_Configuration(void)
+{   
+  /* Enable peripheral clocks ------------------------------------------------*/
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL
+  /* DMA2 clock enable */
+  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA2, ENABLE);
+#else
+  /* DMA1 clock enable */
+  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);
+#endif
+  /* GPIOA Periph clock enable */
+  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
+  /* DAC Periph clock enable */
+  RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
+  /* TIM2 Periph clock enable */
+  RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
+}
+
+
+/**
+  * @brief  Configures the different GPIO ports.
+  * @param  None
+  * @retval None
+  */
+void GPIO_Configuration(void)
+{
+  GPIO_InitTypeDef GPIO_InitStructure;
+
+  /* Once the DAC channel is enabled, the corresponding GPIO pin is automatically 
+     connected to the DAC converter. In order to avoid parasitic consumption, 
+     the GPIO pin should be configured in analog */
+  GPIO_InitStructure.GPIO_Pin =  GPIO_Pin_4 | GPIO_Pin_5;
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
+  GPIO_Init(GPIOA, &GPIO_InitStructure);
+}
+
+/**
+  * @brief  Inserts a delay time.
+  * @param  nCount: specifies the delay time length.
+  * @retval None
+  */
+void Delay(__IO uint32_t nCount)
+{
+  for(; nCount != 0; nCount--);
+}
+
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t* file, uint32_t line)
+{ 
+  /* User can add his own implementation to report the file name and line number,
+     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+
+  /* Infinite loop */
+  while (1)
+  {
+  }
+}
+
+#endif
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/readme.txt
new file mode 100644
index 0000000..1e5c19e
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/readme.txt
@@ -0,0 +1,104 @@
+/**
+  @page DAC_DualModeDMA_SineWave DAC dual mode sine wave example
+  
+  @verbatim
+  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
+  * @file    DAC/DualModeDMA_SineWave/readme.txt 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Description of the DAC dual mode sine wave example.
+  ******************************************************************************
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  ******************************************************************************
+   @endverbatim
+
+@par Example Description 
+
+This example describes how to use DAC dual channel mode with DMA to generate sine
+waves on both DAC channels outputs.
+
+Both DAC channels conversions are configured to be triggered by TIM2 TRGO triggers
+and without noise/triangle wave generation. 12bit right data alignment is selected
+since we choose to access DAC_DHR12RD register. DMA2 channel4 is configured to
+transfer continuously, word by word, a 32-word buffer to the dual DAC register
+DAC_DHR12RD.
+
+The transferred 32buffer is made to have a sine wave generation on each DAC channel 
+output. Both DAC channels are then enabled. Only DAC channel2 DMA capability is enabled.
+
+Once TIM2 is enabled, each TIM2 TRGO update event generate a DMA request which
+transfer data to the dual DAC register and DAC conversion is started. The sine
+waves can be visualized by connecting both PA.04 and PA.05 pins to an oscilloscope.
+
+
+@par Directory contents 
+
+  - DAC/DualModeDMA_SineWave/stm32f10x_conf.h     Library Configuration file
+  - DAC/DualModeDMA_SineWave/stm32f10x_it.c       Interrupt handlers
+  - DAC/DualModeDMA_SineWave/stm32f10x_it.h       Header for stm32f10x_it.c
+  - DAC/DualModeDMA_SineWave/main.c               Main program
+  - DAC/DualModeDMA_SineWave/system_stm32f10x.c   STM32F10x system source file
+
+@par Hardware and Software environment 
+
+  - This example runs on STM32F10x Connectivity line, High-Density, High-Density
+    Value line, XL-Density, Medium-Density Value line and Low-Density Value line 
+    Devices.
+  
+  - This example has been tested with STMicroelectronics STM32100E-EVAL 
+    (High-Density Value line), STM32100B-EVAL (Medium-Density Value line), 
+    STM3210C-EVAL (Connectivity line) and STM3210E-EVAL (High-Density and XL-Density) 
+    evaluation boards and can be easily tailored to any other supported device 
+    and development board. 
+
+  - STM32100E-EVAL Set-up 
+    - Connect PA.04 and PA.05 pins to an oscilloscope 
+    
+  - STM32100B-EVAL Set-up 
+    - Connect PA.04 and PA.05 pins to an oscilloscope 
+    
+  - STM3210C-EVAL Set-up  
+    - Only PA.04 can be monitored on an oscilloscope, PA.05 is used by other
+      module (Motor control connector) that prevents to have DAC channel output
+      on it. However, if you don't use Motor control connector, you can remove
+      the 0ohm resistor R84 and thus PA.05 can be used for DAC output.
+    @note Make shure that jumper JP15 is open.
+        
+  - STM3210E-EVAL Set-up 
+    - Connect PA.04 and PA.05 pins to an oscilloscope    
+
+    
+@par How to use it ? 
+
+In order to make the program work, you must do the following :
+ - Copy all source files from this example folder to the template folder under
+   Project\STM32F10x_StdPeriph_Template
+ - Open your preferred toolchain 
+ - Rebuild all files and load your image into target memory
+ - Run the example 
+
+@note
+ - Low-density Value line devices are STM32F100xx microcontrollers where the 
+   Flash memory density ranges between 16 and 32 Kbytes.
+ - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
+   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
+ - Medium-density Value line devices are STM32F100xx microcontrollers where
+   the Flash memory density ranges between 64 and 128 Kbytes.  
+ - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
+   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
+ - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes.
+ - High-density Value line devices are STM32F100xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes.   
+ - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 512 and 1024 Kbytes.
+ - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
+    
+ * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
+ */
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/stm32f10x_conf.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/stm32f10x_conf.h
new file mode 100644
index 0000000..9f785ca
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/stm32f10x_conf.h
@@ -0,0 +1,77 @@
+/**
+  ******************************************************************************
+  * @file    DAC/DualModeDMA_SineWave/stm32f10x_conf.h 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Library configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CONF_H
+#define __STM32F10x_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
+#include "stm32f10x_adc.h"
+#include "stm32f10x_bkp.h"
+#include "stm32f10x_can.h"
+#include "stm32f10x_cec.h"
+#include "stm32f10x_crc.h"
+#include "stm32f10x_dac.h"
+#include "stm32f10x_dbgmcu.h"
+#include "stm32f10x_dma.h"
+#include "stm32f10x_exti.h"
+#include "stm32f10x_flash.h"
+#include "stm32f10x_fsmc.h"
+#include "stm32f10x_gpio.h"
+#include "stm32f10x_i2c.h"
+#include "stm32f10x_iwdg.h"
+#include "stm32f10x_pwr.h"
+#include "stm32f10x_rcc.h"
+#include "stm32f10x_rtc.h"
+#include "stm32f10x_sdio.h"
+#include "stm32f10x_spi.h"
+#include "stm32f10x_tim.h"
+#include "stm32f10x_usart.h"
+#include "stm32f10x_wwdg.h"
+#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to expanse the "assert_param" macro in the 
+   Standard Peripheral Library drivers code */
+/* #define USE_FULL_ASSERT    1 */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function which reports 
+  *         the name of the source file and the source line number of the call 
+  *         that failed. If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#endif /* __STM32F10x_CONF_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/stm32f10x_it.c
new file mode 100644
index 0000000..7e56d9f
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/stm32f10x_it.c
@@ -0,0 +1,167 @@
+/**
+  ******************************************************************************
+  * @file    DAC/DualModeDMA_SineWave/stm32f10x_it.c 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Main Interrupt Service Routines.
+  *          This file provides template for all exceptions handler and peripherals
+  *          interrupt service routine.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_it.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Examples
+  * @{
+  */
+
+/** @addtogroup DAC_DualModeDMA_SineWave
+  * @{
+  */ 
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/******************************************************************************/
+/*            Cortex-M3 Processor Exceptions Handlers                         */
+/******************************************************************************/
+
+/**
+  * @brief  This function handles NMI exception.
+  * @param  None
+  * @retval None
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles Hard Fault exception.
+  * @param  None
+  * @retval None
+  */
+void HardFault_Handler(void)
+{
+  /* Go to infinite loop when Hard Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Memory Manage exception.
+  * @param  None
+  * @retval None
+  */
+void MemManage_Handler(void)
+{
+  /* Go to infinite loop when Memory Manage exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Bus Fault exception.
+  * @param  None
+  * @retval None
+  */
+void BusFault_Handler(void)
+{
+  /* Go to infinite loop when Bus Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Usage Fault exception.
+  * @param  None
+  * @retval None
+  */
+void UsageFault_Handler(void)
+{
+  /* Go to infinite loop when Usage Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles SVCall exception.
+  * @param  None
+  * @retval None
+  */
+void SVC_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles Debug Monitor exception.
+  * @param  None
+  * @retval None
+  */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles PendSV_Handler exception.
+  * @param  None
+  * @retval None
+  */
+void PendSV_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles SysTick Handler.
+  * @param  None
+  * @retval None
+  */
+void SysTick_Handler(void)
+{
+}
+
+/******************************************************************************/
+/*                 STM32F10x Peripherals Interrupt Handlers                   */
+/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
+/*  available peripheral interrupt handler's name please refer to the startup */
+/*  file (startup_stm32f10x_xx.s).                                            */
+/******************************************************************************/
+
+/**
+  * @brief  This function handles PPP interrupt request.
+  * @param  None
+  * @retval None
+  */
+/*void PPP_IRQHandler(void)
+{
+}*/
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/stm32f10x_it.h
new file mode 100644
index 0000000..b841811
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/stm32f10x_it.h
@@ -0,0 +1,46 @@
+/**
+  ******************************************************************************
+  * @file    DAC/DualModeDMA_SineWave/stm32f10x_it.h 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_IT_H
+#define __STM32F10x_IT_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#endif /* __STM32F10x_IT_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/system_stm32f10x.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/system_stm32f10x.c
new file mode 100644
index 0000000..fb01774
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/DualModeDMA_SineWave/system_stm32f10x.c
@@ -0,0 +1,1094 @@
+/**
+  ******************************************************************************
+  * @file    DAC/DualModeDMA_SineWave/system_stm32f10x.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+  * 
+  * 1.  This file provides two functions and one global variable to be called from 
+  *     user application:
+  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
+  *                      factors, AHB/APBx prescalers and Flash settings). 
+  *                      This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f10x_xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+  *    Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to
+  *    configure the system clock before to branch to main program.
+  *
+  * 3. If the system clock source selected by user fails to startup, the SystemInit()
+  *    function will do nothing and HSI still used as system clock source. User can 
+  *    add some code to deal with this issue inside the SetSysClock() function.
+  *
+  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on
+  *    the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. 
+  *    When HSE is used as system clock source, directly or through PLL, and you
+  *    are using different crystal you have to adapt the HSE value to your own
+  *    configuration.
+  *        
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f10x_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F10x_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f10x.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Defines
+  * @{
+  */
+
+/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
+   frequency (after reset the HSI is used as SYSCLK source)
+   
+   IMPORTANT NOTE:
+   ============== 
+   1. After each device reset the HSI is used as System clock source.
+
+   2. Please make sure that the selected System clock doesn't exceed your device's
+      maximum frequency.
+      
+   3. If none of the define below is enabled, the HSI is used as System clock
+    source.
+
+   4. The System clock configuration functions provided within this file assume that:
+        - For Low, Medium and High density Value line devices an external 8MHz 
+          crystal is used to drive the System clock.
+        - For Low, Medium and High density devices an external 8MHz crystal is
+          used to drive the System clock.
+        - For Connectivity line devices an external 25MHz crystal is used to drive
+          the System clock.
+     If you are using different crystal you have to adapt those functions accordingly.
+    */
+    
+#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
+ #define SYSCLK_FREQ_24MHz  24000000
+#else
+/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
+/* #define SYSCLK_FREQ_24MHz  24000000 */ 
+/* #define SYSCLK_FREQ_36MHz  36000000 */
+/* #define SYSCLK_FREQ_48MHz  48000000 */
+/* #define SYSCLK_FREQ_56MHz  56000000 */
+#define SYSCLK_FREQ_72MHz  72000000
+#endif
+
+/*!< Uncomment the following line if you need to use external SRAM mounted
+     on STM3210E-EVAL board (STM32 High density and XL-density devices) or on 
+     STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ 
+#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
+/* #define DATA_IN_ExtSRAM */
+#endif
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */ 
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x0 /*!< Vector Table base offset field. 
+                                  This value must be a multiple of 0x200. */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Variables
+  * @{
+  */
+
+/*******************************************************************************
+*  Clock Definitions
+*******************************************************************************/
+#ifdef SYSCLK_FREQ_HSE
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_HSE;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_24MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_24MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_36MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_36MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_48MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_48MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_56MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_56MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_72MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_72MHz;        /*!< System Clock Frequency (Core Clock) */
+#else /*!< HSI Selected as System Clock source */
+  uint32_t SystemCoreClock         = HSI_VALUE;        /*!< System Clock Frequency (Core Clock) */
+#endif
+
+__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_FunctionPrototypes
+  * @{
+  */
+
+static void SetSysClock(void);
+
+#ifdef SYSCLK_FREQ_HSE
+  static void SetSysClockToHSE(void);
+#elif defined SYSCLK_FREQ_24MHz
+  static void SetSysClockTo24(void);
+#elif defined SYSCLK_FREQ_36MHz
+  static void SetSysClockTo36(void);
+#elif defined SYSCLK_FREQ_48MHz
+  static void SetSysClockTo48(void);
+#elif defined SYSCLK_FREQ_56MHz
+  static void SetSysClockTo56(void);  
+#elif defined SYSCLK_FREQ_72MHz
+  static void SetSysClockTo72(void);
+#endif
+
+#ifdef DATA_IN_ExtSRAM
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the Embedded Flash Interface, the PLL and update the 
+  *         SystemCoreClock variable.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
+  /* Set HSION bit */
+  RCC->CR |= (uint32_t)0x00000001;
+
+  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#ifndef STM32F10X_CL
+  RCC->CFGR &= (uint32_t)0xF8FF0000;
+#else
+  RCC->CFGR &= (uint32_t)0xF0FF0000;
+#endif /* STM32F10X_CL */   
+  
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+  RCC->CFGR &= (uint32_t)0xFF80FFFF;
+
+#ifdef STM32F10X_CL
+  /* Reset PLL2ON and PLL3ON bits */
+  RCC->CR &= (uint32_t)0xEBFFFFFF;
+
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x00FF0000;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000;
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000;      
+#else
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000;
+#endif /* STM32F10X_CL */
+    
+#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
+  #ifdef DATA_IN_ExtSRAM
+    SystemInit_ExtMemCtl(); 
+  #endif /* DATA_IN_ExtSRAM */
+#endif 
+
+  /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
+  /* Configure the Flash Latency cycles and enable prefetch buffer */
+  SetSysClock();
+
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
+#endif 
+}
+
+/**
+  * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
+  *             8 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
+  *              8 MHz or 25 MHz, depedning on the product used), user has to ensure
+  *              that HSE_VALUE is same as the real frequency of the crystal used.
+  *              Otherwise, this function may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0, pllmull = 0, pllsource = 0;
+
+#ifdef  STM32F10X_CL
+  uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+  uint32_t prediv1factor = 0;
+#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
+    
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+  
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock */
+
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+      
+#ifndef STM32F10X_CL      
+      pllmull = ( pllmull >> 18) + 2;
+      
+      if (pllsource == 0x00)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+      }
+      else
+      {
+ #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
+       /* HSE oscillator clock selected as PREDIV1 clock entry */
+       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
+ #else
+        /* HSE selected as PLL clock entry */
+        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
+        {/* HSE oscillator clock divided by 2 */
+          SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
+        }
+        else
+        {
+          SystemCoreClock = HSE_VALUE * pllmull;
+        }
+ #endif
+      }
+#else
+      pllmull = pllmull >> 18;
+      
+      if (pllmull != 0x0D)
+      {
+         pllmull += 2;
+      }
+      else
+      { /* PLL multiplication factor = PLL input clock * 6.5 */
+        pllmull = 13 / 2; 
+      }
+            
+      if (pllsource == 0x00)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+      }
+      else
+      {/* PREDIV1 selected as PLL clock entry */
+        
+        /* Get PREDIV1 clock source and division factor */
+        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
+        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
+        
+        if (prediv1source == 0)
+        { 
+          /* HSE oscillator clock selected as PREDIV1 clock entry */
+          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
+        }
+        else
+        {/* PLL2 clock selected as PREDIV1 clock entry */
+          
+          /* Get PREDIV2 division factor and PLL2 multiplication factor */
+          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
+          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 
+          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
+        }
+      }
+#endif /* STM32F10X_CL */ 
+      break;
+
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  
+  /* Compute HCLK clock frequency ----------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;  
+}
+
+/**
+  * @brief  Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClock(void)
+{
+#ifdef SYSCLK_FREQ_HSE
+  SetSysClockToHSE();
+#elif defined SYSCLK_FREQ_24MHz
+  SetSysClockTo24();
+#elif defined SYSCLK_FREQ_36MHz
+  SetSysClockTo36();
+#elif defined SYSCLK_FREQ_48MHz
+  SetSysClockTo48();
+#elif defined SYSCLK_FREQ_56MHz
+  SetSysClockTo56();  
+#elif defined SYSCLK_FREQ_72MHz
+  SetSysClockTo72();
+#endif
+ 
+ /* If none of the define above is enabled, the HSI is used as System clock
+    source (default after reset) */ 
+}
+
+/**
+  * @brief  Setup the external memory controller. Called in startup_stm32f10x.s 
+  *          before jump to __main
+  * @param  None
+  * @retval None
+  */ 
+#ifdef DATA_IN_ExtSRAM
+/**
+  * @brief  Setup the external memory controller. 
+  *         Called in startup_stm32f10x_xx.s/.c before jump to main.
+  * 	      This function configures the external SRAM mounted on STM3210E-EVAL
+  *         board (STM32 High density devices). This SRAM will be used as program
+  *         data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */ 
+void SystemInit_ExtMemCtl(void) 
+{
+/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
+  required, then adjust the Register Addresses */
+
+  /* Enable FSMC clock */
+  RCC->AHBENR = 0x00000114;
+  
+  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */  
+  RCC->APB2ENR = 0x000001E0;
+  
+/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
+/*----------------  SRAM Address lines configuration -------------------------*/
+/*----------------  NOE and NWE configuration --------------------------------*/  
+/*----------------  NE3 configuration ----------------------------------------*/
+/*----------------  NBL0, NBL1 configuration ---------------------------------*/
+  
+  GPIOD->CRL = 0x44BB44BB;  
+  GPIOD->CRH = 0xBBBBBBBB;
+
+  GPIOE->CRL = 0xB44444BB;  
+  GPIOE->CRH = 0xBBBBBBBB;
+
+  GPIOF->CRL = 0x44BBBBBB;  
+  GPIOF->CRH = 0xBBBB4444;
+
+  GPIOG->CRL = 0x44BBBBBB;  
+  GPIOG->CRH = 0x44444B44;
+   
+/*----------------  FSMC Configuration ---------------------------------------*/  
+/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
+  
+  FSMC_Bank1->BTCR[4] = 0x00001011;
+  FSMC_Bank1->BTCR[5] = 0x00000200;
+}
+#endif /* DATA_IN_ExtSRAM */
+
+#ifdef SYSCLK_FREQ_HSE
+/**
+  * @brief  Selects HSE as System clock source and configure HCLK, PCLK2
+  *          and PCLK1 prescalers.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockToHSE(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 0 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+
+#ifndef STM32F10X_CL
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+#else
+    if (HSE_VALUE <= 24000000)
+	{
+      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+	}
+	else
+	{
+      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
+	}
+#endif /* STM32F10X_CL */
+#endif
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+    /* Select HSE as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE;    
+
+    /* Wait till HSE is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  }  
+}
+#elif defined SYSCLK_FREQ_24MHz
+/**
+  * @brief  Sets System clock frequency to 24MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo24(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL 
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 0 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;    
+#endif
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL6); 
+
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */       
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }   
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6);
+#else    
+    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+#elif defined SYSCLK_FREQ_36MHz
+/**
+  * @brief  Sets System clock frequency to 36MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo36(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 1 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    
+    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL9); 
+
+	/*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+#else    
+    /*  PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+#elif defined SYSCLK_FREQ_48MHz
+/**
+  * @brief  Sets System clock frequency to 48MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo48(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 1 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL6); 
+#else    
+    /*  PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+
+#elif defined SYSCLK_FREQ_56MHz
+/**
+  * @brief  Sets System clock frequency to 56MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo56(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/   
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 2 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL7); 
+#else     
+    /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7);
+
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+
+#elif defined SYSCLK_FREQ_72MHz
+/**
+  * @brief  Sets System clock frequency to 72MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo72(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 2 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
+
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL9); 
+#else    
+    /*  PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |
+                                        RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+    
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  }
+}
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */    
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/main.c
new file mode 100644
index 0000000..e445ebb
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/main.c
@@ -0,0 +1,212 @@
+/**
+  ******************************************************************************
+  * @file    DAC/OneChannelDMA_Escalator/main.c 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Main program body.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Examples
+  * @{
+  */
+
+/** @addtogroup DAC_OneChannelDMA_Escalator
+  * @{
+  */ 
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define DAC_DHR8R1_Address      0x40007410
+
+/* Init Structure definition */
+DAC_InitTypeDef            DAC_InitStructure;
+DMA_InitTypeDef            DMA_InitStructure;
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+const uint8_t Escalator8bit[6] = {0x0, 0x33, 0x66, 0x99, 0xCC, 0xFF};
+
+/* Private function prototypes -----------------------------------------------*/
+void RCC_Configuration(void);
+void GPIO_Configuration(void);
+void Delay(__IO uint32_t nCount);
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @brief   Main program.
+  * @param  None
+  * @retval None
+  */
+int main(void)
+{
+  /*!< At this stage the microcontroller clock setting is already configured, 
+       this is done through SystemInit() function which is called from startup
+       file (startup_stm32f10x_xx.s) before to branch to application main.
+       To reconfigure the default setting of SystemInit() function, refer to
+       system_stm32f10x.c file
+     */     
+       
+  /* System Clocks Configuration */
+  RCC_Configuration();   
+
+  /* Once the DAC channel is enabled, the corresponding GPIO pin is automatically 
+     connected to the DAC converter. In order to avoid parasitic consumption, 
+     the GPIO pin should be configured in analog */
+  GPIO_Configuration();
+
+  /* TIM6 Configuration */
+  TIM_PrescalerConfig(TIM6, 0xF, TIM_PSCReloadMode_Update);
+  TIM_SetAutoreload(TIM6, 0xFF);
+  /* TIM6 TRGO selection */
+  TIM_SelectOutputTrigger(TIM6, TIM_TRGOSource_Update);
+
+  /* DAC channel1 Configuration */
+  DAC_InitStructure.DAC_Trigger = DAC_Trigger_T6_TRGO;
+  DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;
+  DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Disable;
+  DAC_Init(DAC_Channel_1, &DAC_InitStructure);
+
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL
+  /* DMA2 channel3 configuration */
+  DMA_DeInit(DMA2_Channel3);
+#else
+  /* DMA1 channel3 configuration */
+  DMA_DeInit(DMA1_Channel3);
+#endif
+
+  DMA_InitStructure.DMA_PeripheralBaseAddr = DAC_DHR8R1_Address;
+  DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)&Escalator8bit;
+  DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST;
+  DMA_InitStructure.DMA_BufferSize = 6;
+  DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
+  DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
+  DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
+  DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
+  DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
+  DMA_InitStructure.DMA_Priority = DMA_Priority_High;
+  DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
+
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL
+  DMA_Init(DMA2_Channel3, &DMA_InitStructure);
+  /* Enable DMA2 Channel3 */
+  DMA_Cmd(DMA2_Channel3, ENABLE);
+#else
+  DMA_Init(DMA1_Channel3, &DMA_InitStructure);
+  /* Enable DMA1 Channel3 */
+  DMA_Cmd(DMA1_Channel3, ENABLE);
+#endif
+
+  /* Enable DAC Channel1: Once the DAC channel1 is enabled, PA.04 is 
+     automatically connected to the DAC converter. */
+  DAC_Cmd(DAC_Channel_1, ENABLE);
+
+  /* Enable DMA for DAC Channel1 */
+  DAC_DMACmd(DAC_Channel_1, ENABLE);
+
+  /* TIM6 enable counter */
+  TIM_Cmd(TIM6, ENABLE);
+
+  while (1)
+  {
+  }
+}
+
+
+/**
+  * @brief  Configures the different system clocks.
+  * @param  None
+  * @retval None
+  */
+void RCC_Configuration(void)
+{   
+  /* Enable peripheral clocks ------------------------------------------------*/
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL
+  /* DMA2 clock enable */
+  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA2, ENABLE);
+#else
+  /* DMA1 clock enable */
+  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);
+#endif
+  /* GPIOA Periph clock enable */
+  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
+  /* DAC Periph clock enable */
+  RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
+  /* TIM6 Periph clock enable */
+  RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM6, ENABLE);
+}
+
+/**
+  * @brief  Configures the different GPIO ports.
+  * @param  None
+  * @retval None
+  */
+void GPIO_Configuration(void)
+{
+  GPIO_InitTypeDef GPIO_InitStructure;
+
+  /* Once the DAC channel is enabled, the corresponding GPIO pin is automatically 
+     connected to the DAC converter. In order to avoid parasitic consumption, 
+     the GPIO pin should be configured in analog */
+  GPIO_InitStructure.GPIO_Pin =  GPIO_Pin_4;
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
+  GPIO_Init(GPIOA, &GPIO_InitStructure);
+}
+
+/**
+  * @brief  Inserts a delay time.
+  * @param  nCount: specifies the delay time length.
+  * @retval None
+  */
+void Delay(__IO uint32_t nCount)
+{
+  for(; nCount != 0; nCount--);
+}
+
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t* file, uint32_t line)
+{ 
+  /* User can add his own implementation to report the file name and line number,
+     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+
+  /* Infinite loop */
+  while (1)
+  {
+  }
+}
+
+#endif
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/readme.txt
new file mode 100644
index 0000000..90fd74a
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/readme.txt
@@ -0,0 +1,99 @@
+/**
+  @page DAC_OneChannelDMA_Escalator DAC one channel DMA escalator example
+  
+  @verbatim
+  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
+  * @file    DAC/OneChannelDMA_Escalator/readme.txt 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Description of the DAC one channel DMA escalator example.
+  ******************************************************************************
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  ******************************************************************************
+   @endverbatim
+
+@par Example Description 
+
+This example describes how to use one DAC channel mode with DMA to generate an
+escalator signal on DAC channel1 output.
+
+DAC channel1 conversion is configured to be triggered by TIM6 TRGO triggers and
+without noise/triangle wave generation. 8bit right data alignment is selected
+since we choose to access DAC_DHR8R1 register.
+DMA2 channel3 is configured to transfer continuously, byte by byte, a 6-byte
+buffer to the DAC1 register DAC_DHR8R1.
+
+The transferred 6bytes buffer is made to have an escalator signal on DAC channel1
+output. DAC channel1 is then enabled. Once TIM6 is enabled, each TIM6 TRGO update
+event generate a DMA request which transfer data  to the DAC1 register and DAC
+conversion is started. The escalator signal can be visualized by connecting PA.04
+pin to an oscilloscope.
+
+@par Directory contents 
+
+  - DAC/OneChannelDMA_Escalator/stm32f10x_conf.h     Library Configuration file
+  - DAC/OneChannelDMA_Escalator/stm32f10x_it.c       Interrupt handlers
+  - DAC/OneChannelDMA_Escalator/stm32f10x_it.h       Header for stm32f10x_it.c
+  - DAC/OneChannelDMA_Escalator/main.c               Main program
+  - DAC/OneChannelDMA_Escalator/system_stm32f10x.c   STM32F10x system source file
+  
+@par Hardware and Software environment 
+
+  - This example runs on STM32F10x Connectivity line, High-Density, XL-Density,
+    High-Density Value line, Medium-Density Value line and Low-Density Value 
+    line Devices.
+  
+  - This example has been tested with STMicroelectronics STM32100B-EVAL 
+    (Medium-Density Value line),STM32100E-EVAL (High-Density Value line),
+     STM3210C-EVAL (Connectivity line) and STM3210E-EVAL (High-Density and 
+     XL-Density) evaluation boards and can be easily tailored to any other 
+     supported device and development board.   
+
+  - STM32100B-EVAL Set-up 
+    - Connect PA.04 pin to an oscilloscope 
+    @note Make shure that jumper JP2 is open.
+    
+  - STM3210C-EVAL Set-up 
+    - Connect PA.04 pin to an oscilloscope
+    @note Make shure that jumper JP15 is open.
+        
+  - STM3210E-EVAL Set-up 
+    - Connect PA.04 pin to an oscilloscope
+	
+  - STM32100E-EVAL Set-up 
+    - Connect PA.04 pin to an oscilloscope
+    
+@par How to use it ? 
+
+In order to make the program work, you must do the following :
+ - Copy all source files from this example folder to the template folder under
+   Project\STM32F10x_StdPeriph_Template
+ - Open your preferred toolchain 
+ - Rebuild all files and load your image into target memory
+ - Run the example 
+
+@note
+ - Low-density Value line devices are STM32F100xx microcontrollers where the 
+   Flash memory density ranges between 16 and 32 Kbytes.
+ - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
+   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
+ - Medium-density Value line devices are STM32F100xx microcontrollers where
+   the Flash memory density ranges between 64 and 128 Kbytes.  
+ - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
+   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
+ - High-density Value line devices are STM32F100xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes.
+ - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes.
+ - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 512 and 1024 Kbytes.
+ - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
+    
+ * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
+ */
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/stm32f10x_conf.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/stm32f10x_conf.h
new file mode 100644
index 0000000..f0ae13c
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/stm32f10x_conf.h
@@ -0,0 +1,77 @@
+/**
+  ******************************************************************************
+  * @file    DAC/OneChannelDMA_Escalator/stm32f10x_conf.h 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Library configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CONF_H
+#define __STM32F10x_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
+#include "stm32f10x_adc.h"
+#include "stm32f10x_bkp.h"
+#include "stm32f10x_can.h"
+#include "stm32f10x_cec.h"
+#include "stm32f10x_crc.h"
+#include "stm32f10x_dac.h"
+#include "stm32f10x_dbgmcu.h"
+#include "stm32f10x_dma.h"
+#include "stm32f10x_exti.h"
+#include "stm32f10x_flash.h"
+#include "stm32f10x_fsmc.h"
+#include "stm32f10x_gpio.h"
+#include "stm32f10x_i2c.h"
+#include "stm32f10x_iwdg.h"
+#include "stm32f10x_pwr.h"
+#include "stm32f10x_rcc.h"
+#include "stm32f10x_rtc.h"
+#include "stm32f10x_sdio.h"
+#include "stm32f10x_spi.h"
+#include "stm32f10x_tim.h"
+#include "stm32f10x_usart.h"
+#include "stm32f10x_wwdg.h"
+#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to expanse the "assert_param" macro in the 
+   Standard Peripheral Library drivers code */
+/* #define USE_FULL_ASSERT    1 */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function which reports 
+  *         the name of the source file and the source line number of the call 
+  *         that failed. If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#endif /* __STM32F10x_CONF_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/stm32f10x_it.c
new file mode 100644
index 0000000..bb118e6
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/stm32f10x_it.c
@@ -0,0 +1,167 @@
+/**
+  ******************************************************************************
+  * @file    DAC/OneChannelDMA_Escalator/stm32f10x_it.c 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Main Interrupt Service Routines.
+  *          This file provides template for all exceptions handler and peripherals
+  *          interrupt service routine.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_it.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Examples
+  * @{
+  */
+
+/** @addtogroup DAC_OneChannelDMA_Escalator
+  * @{
+  */ 
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/******************************************************************************/
+/*            Cortex-M3 Processor Exceptions Handlers                         */
+/******************************************************************************/
+
+/**
+  * @brief  This function handles NMI exception.
+  * @param  None
+  * @retval None
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles Hard Fault exception.
+  * @param  None
+  * @retval None
+  */
+void HardFault_Handler(void)
+{
+  /* Go to infinite loop when Hard Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Memory Manage exception.
+  * @param  None
+  * @retval None
+  */
+void MemManage_Handler(void)
+{
+  /* Go to infinite loop when Memory Manage exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Bus Fault exception.
+  * @param  None
+  * @retval None
+  */
+void BusFault_Handler(void)
+{
+  /* Go to infinite loop when Bus Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Usage Fault exception.
+  * @param  None
+  * @retval None
+  */
+void UsageFault_Handler(void)
+{
+  /* Go to infinite loop when Usage Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles SVCall exception.
+  * @param  None
+  * @retval None
+  */
+void SVC_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles Debug Monitor exception.
+  * @param  None
+  * @retval None
+  */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles PendSV_Handler exception.
+  * @param  None
+  * @retval None
+  */
+void PendSV_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles SysTick Handler.
+  * @param  None
+  * @retval None
+  */
+void SysTick_Handler(void)
+{
+}
+
+/******************************************************************************/
+/*                 STM32F10x Peripherals Interrupt Handlers                   */
+/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
+/*  available peripheral interrupt handler's name please refer to the startup */
+/*  file (startup_stm32f10x_xx.s).                                            */
+/******************************************************************************/
+
+/**
+  * @brief  This function handles PPP interrupt request.
+  * @param  None
+  * @retval None
+  */
+/*void PPP_IRQHandler(void)
+{
+}*/
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/stm32f10x_it.h
new file mode 100644
index 0000000..e7d83cd
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/stm32f10x_it.h
@@ -0,0 +1,46 @@
+/**
+  ******************************************************************************
+  * @file    DAC/OneChannelDMA_Escalator/stm32f10x_it.h 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_IT_H
+#define __STM32F10x_IT_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+					 
+#endif /* __STM32F10x_IT_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/system_stm32f10x.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/system_stm32f10x.c
new file mode 100644
index 0000000..3e6f2de
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannelDMA_Escalator/system_stm32f10x.c
@@ -0,0 +1,1094 @@
+/**
+  ******************************************************************************
+  * @file    DAC/OneChannelDMA_Escalator/system_stm32f10x.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+  * 
+  * 1.  This file provides two functions and one global variable to be called from 
+  *     user application:
+  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
+  *                      factors, AHB/APBx prescalers and Flash settings). 
+  *                      This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f10x_xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+  *    Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to
+  *    configure the system clock before to branch to main program.
+  *
+  * 3. If the system clock source selected by user fails to startup, the SystemInit()
+  *    function will do nothing and HSI still used as system clock source. User can 
+  *    add some code to deal with this issue inside the SetSysClock() function.
+  *
+  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on
+  *    the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. 
+  *    When HSE is used as system clock source, directly or through PLL, and you
+  *    are using different crystal you have to adapt the HSE value to your own
+  *    configuration.
+  *        
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f10x_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F10x_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f10x.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Defines
+  * @{
+  */
+
+/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
+   frequency (after reset the HSI is used as SYSCLK source)
+   
+   IMPORTANT NOTE:
+   ============== 
+   1. After each device reset the HSI is used as System clock source.
+
+   2. Please make sure that the selected System clock doesn't exceed your device's
+      maximum frequency.
+      
+   3. If none of the define below is enabled, the HSI is used as System clock
+    source.
+
+   4. The System clock configuration functions provided within this file assume that:
+        - For Low, Medium and High density Value line devices an external 8MHz 
+          crystal is used to drive the System clock.
+        - For Low, Medium and High density devices an external 8MHz crystal is
+          used to drive the System clock.
+        - For Connectivity line devices an external 25MHz crystal is used to drive
+          the System clock.
+     If you are using different crystal you have to adapt those functions accordingly.
+    */
+    
+#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
+ #define SYSCLK_FREQ_24MHz  24000000
+#else
+/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
+/* #define SYSCLK_FREQ_24MHz  24000000 */ 
+/* #define SYSCLK_FREQ_36MHz  36000000 */
+/* #define SYSCLK_FREQ_48MHz  48000000 */
+/* #define SYSCLK_FREQ_56MHz  56000000 */
+#define SYSCLK_FREQ_72MHz  72000000
+#endif
+
+/*!< Uncomment the following line if you need to use external SRAM mounted
+     on STM3210E-EVAL board (STM32 High density and XL-density devices) or on 
+     STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ 
+#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
+/* #define DATA_IN_ExtSRAM */
+#endif
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */ 
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x0 /*!< Vector Table base offset field. 
+                                  This value must be a multiple of 0x200. */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Variables
+  * @{
+  */
+
+/*******************************************************************************
+*  Clock Definitions
+*******************************************************************************/
+#ifdef SYSCLK_FREQ_HSE
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_HSE;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_24MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_24MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_36MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_36MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_48MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_48MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_56MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_56MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_72MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_72MHz;        /*!< System Clock Frequency (Core Clock) */
+#else /*!< HSI Selected as System Clock source */
+  uint32_t SystemCoreClock         = HSI_VALUE;        /*!< System Clock Frequency (Core Clock) */
+#endif
+
+__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_FunctionPrototypes
+  * @{
+  */
+
+static void SetSysClock(void);
+
+#ifdef SYSCLK_FREQ_HSE
+  static void SetSysClockToHSE(void);
+#elif defined SYSCLK_FREQ_24MHz
+  static void SetSysClockTo24(void);
+#elif defined SYSCLK_FREQ_36MHz
+  static void SetSysClockTo36(void);
+#elif defined SYSCLK_FREQ_48MHz
+  static void SetSysClockTo48(void);
+#elif defined SYSCLK_FREQ_56MHz
+  static void SetSysClockTo56(void);  
+#elif defined SYSCLK_FREQ_72MHz
+  static void SetSysClockTo72(void);
+#endif
+
+#ifdef DATA_IN_ExtSRAM
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the Embedded Flash Interface, the PLL and update the 
+  *         SystemCoreClock variable.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
+  /* Set HSION bit */
+  RCC->CR |= (uint32_t)0x00000001;
+
+  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#ifndef STM32F10X_CL
+  RCC->CFGR &= (uint32_t)0xF8FF0000;
+#else
+  RCC->CFGR &= (uint32_t)0xF0FF0000;
+#endif /* STM32F10X_CL */   
+  
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+  RCC->CFGR &= (uint32_t)0xFF80FFFF;
+
+#ifdef STM32F10X_CL
+  /* Reset PLL2ON and PLL3ON bits */
+  RCC->CR &= (uint32_t)0xEBFFFFFF;
+
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x00FF0000;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000;
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000;      
+#else
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000;
+#endif /* STM32F10X_CL */
+    
+#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
+  #ifdef DATA_IN_ExtSRAM
+    SystemInit_ExtMemCtl(); 
+  #endif /* DATA_IN_ExtSRAM */
+#endif 
+
+  /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
+  /* Configure the Flash Latency cycles and enable prefetch buffer */
+  SetSysClock();
+
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
+#endif 
+}
+
+/**
+  * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
+  *             8 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
+  *              8 MHz or 25 MHz, depedning on the product used), user has to ensure
+  *              that HSE_VALUE is same as the real frequency of the crystal used.
+  *              Otherwise, this function may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0, pllmull = 0, pllsource = 0;
+
+#ifdef  STM32F10X_CL
+  uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+  uint32_t prediv1factor = 0;
+#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
+    
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+  
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock */
+
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+      
+#ifndef STM32F10X_CL      
+      pllmull = ( pllmull >> 18) + 2;
+      
+      if (pllsource == 0x00)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+      }
+      else
+      {
+ #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
+       /* HSE oscillator clock selected as PREDIV1 clock entry */
+       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
+ #else
+        /* HSE selected as PLL clock entry */
+        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
+        {/* HSE oscillator clock divided by 2 */
+          SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
+        }
+        else
+        {
+          SystemCoreClock = HSE_VALUE * pllmull;
+        }
+ #endif
+      }
+#else
+      pllmull = pllmull >> 18;
+      
+      if (pllmull != 0x0D)
+      {
+         pllmull += 2;
+      }
+      else
+      { /* PLL multiplication factor = PLL input clock * 6.5 */
+        pllmull = 13 / 2; 
+      }
+            
+      if (pllsource == 0x00)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+      }
+      else
+      {/* PREDIV1 selected as PLL clock entry */
+        
+        /* Get PREDIV1 clock source and division factor */
+        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
+        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
+        
+        if (prediv1source == 0)
+        { 
+          /* HSE oscillator clock selected as PREDIV1 clock entry */
+          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
+        }
+        else
+        {/* PLL2 clock selected as PREDIV1 clock entry */
+          
+          /* Get PREDIV2 division factor and PLL2 multiplication factor */
+          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
+          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 
+          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
+        }
+      }
+#endif /* STM32F10X_CL */ 
+      break;
+
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  
+  /* Compute HCLK clock frequency ----------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;  
+}
+
+/**
+  * @brief  Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClock(void)
+{
+#ifdef SYSCLK_FREQ_HSE
+  SetSysClockToHSE();
+#elif defined SYSCLK_FREQ_24MHz
+  SetSysClockTo24();
+#elif defined SYSCLK_FREQ_36MHz
+  SetSysClockTo36();
+#elif defined SYSCLK_FREQ_48MHz
+  SetSysClockTo48();
+#elif defined SYSCLK_FREQ_56MHz
+  SetSysClockTo56();  
+#elif defined SYSCLK_FREQ_72MHz
+  SetSysClockTo72();
+#endif
+ 
+ /* If none of the define above is enabled, the HSI is used as System clock
+    source (default after reset) */ 
+}
+
+/**
+  * @brief  Setup the external memory controller. Called in startup_stm32f10x.s 
+  *          before jump to __main
+  * @param  None
+  * @retval None
+  */ 
+#ifdef DATA_IN_ExtSRAM
+/**
+  * @brief  Setup the external memory controller. 
+  *         Called in startup_stm32f10x_xx.s/.c before jump to main.
+  * 	      This function configures the external SRAM mounted on STM3210E-EVAL
+  *         board (STM32 High density devices). This SRAM will be used as program
+  *         data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */ 
+void SystemInit_ExtMemCtl(void) 
+{
+/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
+  required, then adjust the Register Addresses */
+
+  /* Enable FSMC clock */
+  RCC->AHBENR = 0x00000114;
+  
+  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */  
+  RCC->APB2ENR = 0x000001E0;
+  
+/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
+/*----------------  SRAM Address lines configuration -------------------------*/
+/*----------------  NOE and NWE configuration --------------------------------*/  
+/*----------------  NE3 configuration ----------------------------------------*/
+/*----------------  NBL0, NBL1 configuration ---------------------------------*/
+  
+  GPIOD->CRL = 0x44BB44BB;  
+  GPIOD->CRH = 0xBBBBBBBB;
+
+  GPIOE->CRL = 0xB44444BB;  
+  GPIOE->CRH = 0xBBBBBBBB;
+
+  GPIOF->CRL = 0x44BBBBBB;  
+  GPIOF->CRH = 0xBBBB4444;
+
+  GPIOG->CRL = 0x44BBBBBB;  
+  GPIOG->CRH = 0x44444B44;
+   
+/*----------------  FSMC Configuration ---------------------------------------*/  
+/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
+  
+  FSMC_Bank1->BTCR[4] = 0x00001011;
+  FSMC_Bank1->BTCR[5] = 0x00000200;
+}
+#endif /* DATA_IN_ExtSRAM */
+
+#ifdef SYSCLK_FREQ_HSE
+/**
+  * @brief  Selects HSE as System clock source and configure HCLK, PCLK2
+  *          and PCLK1 prescalers.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockToHSE(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 0 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+
+#ifndef STM32F10X_CL
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+#else
+    if (HSE_VALUE <= 24000000)
+	{
+      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+	}
+	else
+	{
+      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
+	}
+#endif /* STM32F10X_CL */
+#endif
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+    /* Select HSE as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE;    
+
+    /* Wait till HSE is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  }  
+}
+#elif defined SYSCLK_FREQ_24MHz
+/**
+  * @brief  Sets System clock frequency to 24MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo24(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL 
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 0 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;    
+#endif
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL6); 
+
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */       
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }   
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6);
+#else    
+    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+#elif defined SYSCLK_FREQ_36MHz
+/**
+  * @brief  Sets System clock frequency to 36MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo36(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 1 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    
+    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL9); 
+
+	/*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+#else    
+    /*  PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+#elif defined SYSCLK_FREQ_48MHz
+/**
+  * @brief  Sets System clock frequency to 48MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo48(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 1 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL6); 
+#else    
+    /*  PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+
+#elif defined SYSCLK_FREQ_56MHz
+/**
+  * @brief  Sets System clock frequency to 56MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo56(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/   
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 2 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL7); 
+#else     
+    /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7);
+
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+
+#elif defined SYSCLK_FREQ_72MHz
+/**
+  * @brief  Sets System clock frequency to 72MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo72(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 2 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
+
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL9); 
+#else    
+    /*  PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |
+                                        RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+    
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  }
+}
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */    
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/main.c
new file mode 100644
index 0000000..896dc50
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/main.c
@@ -0,0 +1,161 @@
+/**
+  ******************************************************************************
+  * @file    DAC/OneChannel_NoiseWave/main.c 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Main program body.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Examples
+  * @{
+  */
+
+/** @addtogroup DAC_OneChannel_NoiseWave
+  * @{
+  */ 
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Init Structure definition */
+DAC_InitTypeDef            DAC_InitStructure;
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+void RCC_Configuration(void);
+void GPIO_Configuration(void);
+void Delay(__IO uint32_t nCount);
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @brief   Main program.
+  * @param  None
+  * @retval None
+  */
+int main(void)
+{
+  /*!< At this stage the microcontroller clock setting is already configured, 
+       this is done through SystemInit() function which is called from startup
+       file (startup_stm32f10x_xx.s) before to branch to application main.
+       To reconfigure the default setting of SystemInit() function, refer to
+       system_stm32f10x.c file
+     */     
+       
+  /* System Clocks Configuration */
+  RCC_Configuration();   
+
+  /* Once the DAC channel is enabled, the corresponding GPIO pin is automatically 
+     connected to the DAC converter. In order to avoid parasitic consumption, 
+     the GPIO pin should be configured in analog */
+  GPIO_Configuration();
+
+  /* DAC channel1 Configuration */
+  DAC_InitStructure.DAC_Trigger = DAC_Trigger_Software;
+  DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_Noise;
+  DAC_InitStructure.DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bits8_0;
+  DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
+  DAC_Init(DAC_Channel_1, &DAC_InitStructure);
+
+  /* Enable DAC Channel1: Once the DAC channel1 is enabled, PA.04 is 
+     automatically connected to the DAC converter. */
+  DAC_Cmd(DAC_Channel_1, ENABLE);
+
+  /* Set DAC Channel1 DHR12L register */
+  DAC_SetChannel1Data(DAC_Align_12b_L, 0x7FF0);
+
+  while (1)
+  {
+    /* Start DAC Channel1 conversion by software */
+    DAC_SoftwareTriggerCmd(DAC_Channel_1, ENABLE);
+  }
+}
+
+/**
+  * @brief  Configures the different system clocks.
+  * @param  None
+  * @retval None
+  */
+void RCC_Configuration(void)
+{   
+  /* Enable peripheral clocks ------------------------------------------------*/
+  /* GPIOA Periph clock enable */
+  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
+  /* DAC Periph clock enable */
+  RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
+}
+
+/**
+  * @brief  Configures the different GPIO ports.
+  * @param  None
+  * @retval None
+  */
+void GPIO_Configuration(void)
+{
+  GPIO_InitTypeDef GPIO_InitStructure;
+
+  /* Once the DAC channel is enabled, the corresponding GPIO pin is automatically 
+     connected to the DAC converter. In order to avoid parasitic consumption, 
+     the GPIO pin should be configured in analog */
+  GPIO_InitStructure.GPIO_Pin =  GPIO_Pin_4;
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
+  GPIO_Init(GPIOA, &GPIO_InitStructure);
+}
+
+/**
+  * @brief  Inserts a delay time.
+  * @param  nCount: specifies the delay time length.
+  * @retval None
+  */
+void Delay(__IO uint32_t nCount)
+{
+  for(; nCount != 0; nCount--);
+}
+
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t* file, uint32_t line)
+{ 
+  /* User can add his own implementation to report the file name and line number,
+     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+
+  /* Infinite loop */
+  while (1)
+  {
+  }
+}
+
+#endif
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/readme.txt
new file mode 100644
index 0000000..80d045b
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/readme.txt
@@ -0,0 +1,99 @@
+/**
+  @page DAC_OneChannel_NoiseWave DAC one channel noise wave example
+  
+  @verbatim
+  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
+  * @file    DAC/OneChannel_NoiseWave/readme.txt 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Description of the DAC one channel noise wave example.
+  ******************************************************************************
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  ******************************************************************************
+   @endverbatim
+
+@par Example Description 
+
+This example describes how to use one DAC channel to generate a signal with noise
+waves on DAC Channel1 output.
+
+DAC channel1 conversion are configured to be triggered by software with noise wave 
+generation.12bit left data alignment is selected since we choose to access DAC_DHR12L1
+register. Bits 0 to 8 are masked for the Linear feedback shift register. 
+DAC channel1 is then enabled. DAC Channel1 DHR12L1 register is configured to have
+an output voltage of VREF/2.
+
+Software triggers are generated continuously in an infinite loop, and on each
+trigger the DAC channel1 start the conversion and calculate the noise value to
+apply on the DAC channel1 output.
+
+The output signal with noise waves can be visualized by connecting PA.04 pin to
+an oscilloscope.
+
+@par Directory contents 
+
+  - DAC/OneChannel_NoiseWave/stm32f10x_conf.h     Library Configuration file
+  - DAC/OneChannel_NoiseWave/stm32f10x_it.c       Interrupt handlers
+  - DAC/OneChannel_NoiseWave/stm32f10x_it.h       Header for stm32f10x_it.c
+  - DAC/OneChannel_NoiseWave/main.c               Main program
+  - DAC/OneChannel_NoiseWave/system_stm32f10x.c   STM32F10x system source file
+  
+@par Hardware and Software environment 
+
+  - This example runs on STM32F10x Connectivity line, High-Density, XL-Density,
+    High-Density Value line, Medium-Density Value line and Low-Density Value 
+    line Devices.
+  
+  - This example has been tested with STMicroelectronics STM32100B-EVAL 
+    (Medium-Density Value line),STM32100E-EVAL (High-Density Value line),
+    STM3210C-EVAL (Connectivity line) and STM3210E-EVAL (High-Density and 
+    XL-Density) evaluation boards and can be easily tailored to any other 
+    supported device and development board.   
+    
+  - STM32100B-EVAL Set-up  
+    - Connect PA.04 pin to an oscilloscope
+    @note JP2 should be open
+      
+  - STM3210C-EVAL Set-up 
+    - Connect PA.04 pin to an oscilloscope
+    
+  - STM3210E-EVAL Set-up 
+    - Connect PA.04 pin to an oscilloscope
+
+  - STM32100E-EVAL Set-up 
+    - Connect PA.04 pin to an oscilloscope
+    
+@par How to use it ? 
+
+In order to make the program work, you must do the following :
+ - Copy all source files from this example folder to the template folder under
+   Project\STM32F10x_StdPeriph_Template
+ - Open your preferred toolchain 
+ - Rebuild all files and load your image into target memory
+ - Run the example 
+
+@note
+ - Low-density Value line devices are STM32F100xx microcontrollers where the 
+   Flash memory density ranges between 16 and 32 Kbytes.
+ - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
+   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
+ - Medium-density Value line devices are STM32F100xx microcontrollers where
+   the Flash memory density ranges between 64 and 128 Kbytes.  
+ - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
+   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
+ - High-density Value line devices are STM32F100xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes.
+ - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes.
+ - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 512 and 1024 Kbytes.
+ - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
+    
+ * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
+ */
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/stm32f10x_conf.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/stm32f10x_conf.h
new file mode 100644
index 0000000..b418306
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/stm32f10x_conf.h
@@ -0,0 +1,77 @@
+/**
+  ******************************************************************************
+  * @file    DAC/OneChannel_NoiseWave/stm32f10x_conf.h 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Library configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CONF_H
+#define __STM32F10x_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
+#include "stm32f10x_adc.h"
+#include "stm32f10x_bkp.h"
+#include "stm32f10x_can.h"
+#include "stm32f10x_cec.h"
+#include "stm32f10x_crc.h"
+#include "stm32f10x_dac.h"
+#include "stm32f10x_dbgmcu.h"
+#include "stm32f10x_dma.h"
+#include "stm32f10x_exti.h"
+#include "stm32f10x_flash.h"
+#include "stm32f10x_fsmc.h"
+#include "stm32f10x_gpio.h"
+#include "stm32f10x_i2c.h"
+#include "stm32f10x_iwdg.h"
+#include "stm32f10x_pwr.h"
+#include "stm32f10x_rcc.h"
+#include "stm32f10x_rtc.h"
+#include "stm32f10x_sdio.h"
+#include "stm32f10x_spi.h"
+#include "stm32f10x_tim.h"
+#include "stm32f10x_usart.h"
+#include "stm32f10x_wwdg.h"
+#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to expanse the "assert_param" macro in the 
+   Standard Peripheral Library drivers code */
+/* #define USE_FULL_ASSERT    1 */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function which reports 
+  *         the name of the source file and the source line number of the call 
+  *         that failed. If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#endif /* __STM32F10x_CONF_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/stm32f10x_it.c
new file mode 100644
index 0000000..370a67a
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/stm32f10x_it.c
@@ -0,0 +1,167 @@
+/**
+  ******************************************************************************
+  * @file    DAC/OneChannel_NoiseWave/stm32f10x_it.c 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Main Interrupt Service Routines.
+  *          This file provides template for all exceptions handler and peripherals
+  *          interrupt service routine.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_it.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Examples
+  * @{
+  */
+
+/** @addtogroup DAC_OneChannel_NoiseWave
+  * @{
+  */ 
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/******************************************************************************/
+/*            Cortex-M3 Processor Exceptions Handlers                         */
+/******************************************************************************/
+
+/**
+  * @brief  This function handles NMI exception.
+  * @param  None
+  * @retval None
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles Hard Fault exception.
+  * @param  None
+  * @retval None
+  */
+void HardFault_Handler(void)
+{
+  /* Go to infinite loop when Hard Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Memory Manage exception.
+  * @param  None
+  * @retval None
+  */
+void MemManage_Handler(void)
+{
+  /* Go to infinite loop when Memory Manage exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Bus Fault exception.
+  * @param  None
+  * @retval None
+  */
+void BusFault_Handler(void)
+{
+  /* Go to infinite loop when Bus Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Usage Fault exception.
+  * @param  None
+  * @retval None
+  */
+void UsageFault_Handler(void)
+{
+  /* Go to infinite loop when Usage Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles SVCall exception.
+  * @param  None
+  * @retval None
+  */
+void SVC_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles Debug Monitor exception.
+  * @param  None
+  * @retval None
+  */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles PendSV_Handler exception.
+  * @param  None
+  * @retval None
+  */
+void PendSV_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles SysTick Handler.
+  * @param  None
+  * @retval None
+  */
+void SysTick_Handler(void)
+{
+}
+
+/******************************************************************************/
+/*                 STM32F10x Peripherals Interrupt Handlers                   */
+/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
+/*  available peripheral interrupt handler's name please refer to the startup */
+/*  file (startup_stm32f10x_xx.s).                                            */
+/******************************************************************************/
+
+/**
+  * @brief  This function handles PPP interrupt request.
+  * @param  None
+  * @retval None
+  */
+/*void PPP_IRQHandler(void)
+{
+}*/
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/stm32f10x_it.h
new file mode 100644
index 0000000..248771f
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/stm32f10x_it.h
@@ -0,0 +1,46 @@
+/**
+  ******************************************************************************
+  * @file    DAC/OneChannel_NoiseWave/stm32f10x_it.h 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_IT_H
+#define __STM32F10x_IT_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+					 
+#endif /* __STM32F10x_IT_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/system_stm32f10x.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/system_stm32f10x.c
new file mode 100644
index 0000000..927e739
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/OneChannel_NoiseWave/system_stm32f10x.c
@@ -0,0 +1,1094 @@
+/**
+  ******************************************************************************
+  * @file    DAC/OneChannel_NoiseWave/system_stm32f10x.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+  * 
+  * 1.  This file provides two functions and one global variable to be called from 
+  *     user application:
+  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
+  *                      factors, AHB/APBx prescalers and Flash settings). 
+  *                      This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f10x_xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+  *    Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to
+  *    configure the system clock before to branch to main program.
+  *
+  * 3. If the system clock source selected by user fails to startup, the SystemInit()
+  *    function will do nothing and HSI still used as system clock source. User can 
+  *    add some code to deal with this issue inside the SetSysClock() function.
+  *
+  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on
+  *    the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. 
+  *    When HSE is used as system clock source, directly or through PLL, and you
+  *    are using different crystal you have to adapt the HSE value to your own
+  *    configuration.
+  *        
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f10x_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F10x_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f10x.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Defines
+  * @{
+  */
+
+/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
+   frequency (after reset the HSI is used as SYSCLK source)
+   
+   IMPORTANT NOTE:
+   ============== 
+   1. After each device reset the HSI is used as System clock source.
+
+   2. Please make sure that the selected System clock doesn't exceed your device's
+      maximum frequency.
+      
+   3. If none of the define below is enabled, the HSI is used as System clock
+    source.
+
+   4. The System clock configuration functions provided within this file assume that:
+        - For Low, Medium and High density Value line devices an external 8MHz 
+          crystal is used to drive the System clock.
+        - For Low, Medium and High density devices an external 8MHz crystal is
+          used to drive the System clock.
+        - For Connectivity line devices an external 25MHz crystal is used to drive
+          the System clock.
+     If you are using different crystal you have to adapt those functions accordingly.
+    */
+    
+#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
+ #define SYSCLK_FREQ_24MHz  24000000
+#else
+/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
+/* #define SYSCLK_FREQ_24MHz  24000000 */ 
+/* #define SYSCLK_FREQ_36MHz  36000000 */
+/* #define SYSCLK_FREQ_48MHz  48000000 */
+/* #define SYSCLK_FREQ_56MHz  56000000 */
+#define SYSCLK_FREQ_72MHz  72000000
+#endif
+
+/*!< Uncomment the following line if you need to use external SRAM mounted
+     on STM3210E-EVAL board (STM32 High density and XL-density devices) or on 
+     STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ 
+#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
+/* #define DATA_IN_ExtSRAM */
+#endif
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */ 
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x0 /*!< Vector Table base offset field. 
+                                  This value must be a multiple of 0x200. */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Variables
+  * @{
+  */
+
+/*******************************************************************************
+*  Clock Definitions
+*******************************************************************************/
+#ifdef SYSCLK_FREQ_HSE
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_HSE;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_24MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_24MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_36MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_36MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_48MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_48MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_56MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_56MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_72MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_72MHz;        /*!< System Clock Frequency (Core Clock) */
+#else /*!< HSI Selected as System Clock source */
+  uint32_t SystemCoreClock         = HSI_VALUE;        /*!< System Clock Frequency (Core Clock) */
+#endif
+
+__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_FunctionPrototypes
+  * @{
+  */
+
+static void SetSysClock(void);
+
+#ifdef SYSCLK_FREQ_HSE
+  static void SetSysClockToHSE(void);
+#elif defined SYSCLK_FREQ_24MHz
+  static void SetSysClockTo24(void);
+#elif defined SYSCLK_FREQ_36MHz
+  static void SetSysClockTo36(void);
+#elif defined SYSCLK_FREQ_48MHz
+  static void SetSysClockTo48(void);
+#elif defined SYSCLK_FREQ_56MHz
+  static void SetSysClockTo56(void);  
+#elif defined SYSCLK_FREQ_72MHz
+  static void SetSysClockTo72(void);
+#endif
+
+#ifdef DATA_IN_ExtSRAM
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the Embedded Flash Interface, the PLL and update the 
+  *         SystemCoreClock variable.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
+  /* Set HSION bit */
+  RCC->CR |= (uint32_t)0x00000001;
+
+  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#ifndef STM32F10X_CL
+  RCC->CFGR &= (uint32_t)0xF8FF0000;
+#else
+  RCC->CFGR &= (uint32_t)0xF0FF0000;
+#endif /* STM32F10X_CL */   
+  
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+  RCC->CFGR &= (uint32_t)0xFF80FFFF;
+
+#ifdef STM32F10X_CL
+  /* Reset PLL2ON and PLL3ON bits */
+  RCC->CR &= (uint32_t)0xEBFFFFFF;
+
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x00FF0000;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000;
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000;      
+#else
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000;
+#endif /* STM32F10X_CL */
+    
+#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
+  #ifdef DATA_IN_ExtSRAM
+    SystemInit_ExtMemCtl(); 
+  #endif /* DATA_IN_ExtSRAM */
+#endif 
+
+  /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
+  /* Configure the Flash Latency cycles and enable prefetch buffer */
+  SetSysClock();
+
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
+#endif 
+}
+
+/**
+  * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
+  *             8 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
+  *              8 MHz or 25 MHz, depedning on the product used), user has to ensure
+  *              that HSE_VALUE is same as the real frequency of the crystal used.
+  *              Otherwise, this function may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0, pllmull = 0, pllsource = 0;
+
+#ifdef  STM32F10X_CL
+  uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+  uint32_t prediv1factor = 0;
+#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
+    
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+  
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock */
+
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+      
+#ifndef STM32F10X_CL      
+      pllmull = ( pllmull >> 18) + 2;
+      
+      if (pllsource == 0x00)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+      }
+      else
+      {
+ #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
+       /* HSE oscillator clock selected as PREDIV1 clock entry */
+       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
+ #else
+        /* HSE selected as PLL clock entry */
+        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
+        {/* HSE oscillator clock divided by 2 */
+          SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
+        }
+        else
+        {
+          SystemCoreClock = HSE_VALUE * pllmull;
+        }
+ #endif
+      }
+#else
+      pllmull = pllmull >> 18;
+      
+      if (pllmull != 0x0D)
+      {
+         pllmull += 2;
+      }
+      else
+      { /* PLL multiplication factor = PLL input clock * 6.5 */
+        pllmull = 13 / 2; 
+      }
+            
+      if (pllsource == 0x00)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+      }
+      else
+      {/* PREDIV1 selected as PLL clock entry */
+        
+        /* Get PREDIV1 clock source and division factor */
+        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
+        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
+        
+        if (prediv1source == 0)
+        { 
+          /* HSE oscillator clock selected as PREDIV1 clock entry */
+          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
+        }
+        else
+        {/* PLL2 clock selected as PREDIV1 clock entry */
+          
+          /* Get PREDIV2 division factor and PLL2 multiplication factor */
+          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
+          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 
+          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
+        }
+      }
+#endif /* STM32F10X_CL */ 
+      break;
+
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  
+  /* Compute HCLK clock frequency ----------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;  
+}
+
+/**
+  * @brief  Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClock(void)
+{
+#ifdef SYSCLK_FREQ_HSE
+  SetSysClockToHSE();
+#elif defined SYSCLK_FREQ_24MHz
+  SetSysClockTo24();
+#elif defined SYSCLK_FREQ_36MHz
+  SetSysClockTo36();
+#elif defined SYSCLK_FREQ_48MHz
+  SetSysClockTo48();
+#elif defined SYSCLK_FREQ_56MHz
+  SetSysClockTo56();  
+#elif defined SYSCLK_FREQ_72MHz
+  SetSysClockTo72();
+#endif
+ 
+ /* If none of the define above is enabled, the HSI is used as System clock
+    source (default after reset) */ 
+}
+
+/**
+  * @brief  Setup the external memory controller. Called in startup_stm32f10x.s 
+  *          before jump to __main
+  * @param  None
+  * @retval None
+  */ 
+#ifdef DATA_IN_ExtSRAM
+/**
+  * @brief  Setup the external memory controller. 
+  *         Called in startup_stm32f10x_xx.s/.c before jump to main.
+  * 	      This function configures the external SRAM mounted on STM3210E-EVAL
+  *         board (STM32 High density devices). This SRAM will be used as program
+  *         data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */ 
+void SystemInit_ExtMemCtl(void) 
+{
+/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
+  required, then adjust the Register Addresses */
+
+  /* Enable FSMC clock */
+  RCC->AHBENR = 0x00000114;
+  
+  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */  
+  RCC->APB2ENR = 0x000001E0;
+  
+/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
+/*----------------  SRAM Address lines configuration -------------------------*/
+/*----------------  NOE and NWE configuration --------------------------------*/  
+/*----------------  NE3 configuration ----------------------------------------*/
+/*----------------  NBL0, NBL1 configuration ---------------------------------*/
+  
+  GPIOD->CRL = 0x44BB44BB;  
+  GPIOD->CRH = 0xBBBBBBBB;
+
+  GPIOE->CRL = 0xB44444BB;  
+  GPIOE->CRH = 0xBBBBBBBB;
+
+  GPIOF->CRL = 0x44BBBBBB;  
+  GPIOF->CRH = 0xBBBB4444;
+
+  GPIOG->CRL = 0x44BBBBBB;  
+  GPIOG->CRH = 0x44444B44;
+   
+/*----------------  FSMC Configuration ---------------------------------------*/  
+/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
+  
+  FSMC_Bank1->BTCR[4] = 0x00001011;
+  FSMC_Bank1->BTCR[5] = 0x00000200;
+}
+#endif /* DATA_IN_ExtSRAM */
+
+#ifdef SYSCLK_FREQ_HSE
+/**
+  * @brief  Selects HSE as System clock source and configure HCLK, PCLK2
+  *          and PCLK1 prescalers.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockToHSE(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 0 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+
+#ifndef STM32F10X_CL
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+#else
+    if (HSE_VALUE <= 24000000)
+	{
+      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+	}
+	else
+	{
+      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
+	}
+#endif /* STM32F10X_CL */
+#endif
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+    /* Select HSE as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE;    
+
+    /* Wait till HSE is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  }  
+}
+#elif defined SYSCLK_FREQ_24MHz
+/**
+  * @brief  Sets System clock frequency to 24MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo24(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL 
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 0 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;    
+#endif
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL6); 
+
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */       
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }   
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6);
+#else    
+    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+#elif defined SYSCLK_FREQ_36MHz
+/**
+  * @brief  Sets System clock frequency to 36MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo36(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 1 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    
+    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL9); 
+
+	/*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+#else    
+    /*  PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+#elif defined SYSCLK_FREQ_48MHz
+/**
+  * @brief  Sets System clock frequency to 48MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo48(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 1 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL6); 
+#else    
+    /*  PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+
+#elif defined SYSCLK_FREQ_56MHz
+/**
+  * @brief  Sets System clock frequency to 56MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo56(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/   
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 2 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL7); 
+#else     
+    /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7);
+
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+
+#elif defined SYSCLK_FREQ_72MHz
+/**
+  * @brief  Sets System clock frequency to 72MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo72(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 2 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
+
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL9); 
+#else    
+    /*  PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |
+                                        RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+    
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  }
+}
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */    
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/main.c
new file mode 100644
index 0000000..7b5773d
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/main.c
@@ -0,0 +1,184 @@
+/**
+  ******************************************************************************
+  * @file    DAC/TwoChannels_TriangleWave/main.c 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Main program body.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Examples
+  * @{
+  */
+
+/** @addtogroup DAC_TwoChannels_TriangleWave
+  * @{
+  */ 
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Init Structure definition */
+DAC_InitTypeDef            DAC_InitStructure;
+TIM_TimeBaseInitTypeDef    TIM_TimeBaseStructure;
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+void RCC_Configuration(void);
+void GPIO_Configuration(void);
+void Delay(__IO uint32_t nCount);
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @brief   Main program.
+  * @param  None
+  * @retval None
+  */
+int main(void)
+{
+  /*!< At this stage the microcontroller clock setting is already configured, 
+       this is done through SystemInit() function which is called from startup
+       file (startup_stm32f10x_xx.s) before to branch to application main.
+       To reconfigure the default setting of SystemInit() function, refer to
+       system_stm32f10x.c file
+     */     
+       
+  /* System Clocks Configuration */
+  RCC_Configuration();   
+
+  /* Once the DAC channel is enabled, the corresponding GPIO pin is automatically 
+     connected to the DAC converter. In order to avoid parasitic consumption, 
+     the GPIO pin should be configured in analog */
+  GPIO_Configuration();
+
+  /* TIM2 Configuration */
+  TIM_TimeBaseStructInit(&TIM_TimeBaseStructure);
+  TIM_TimeBaseStructure.TIM_Period = 0xF;          
+  TIM_TimeBaseStructure.TIM_Prescaler = 0xF;       
+  TIM_TimeBaseStructure.TIM_ClockDivision = 0x0;    
+  TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;  
+  TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
+
+  /* TIM2 TRGO selection */
+  TIM_SelectOutputTrigger(TIM2, TIM_TRGOSource_Update);
+
+  /* DAC channel1 Configuration */
+  DAC_InitStructure.DAC_Trigger = DAC_Trigger_T2_TRGO;
+  DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_Triangle;
+  DAC_InitStructure.DAC_LFSRUnmask_TriangleAmplitude = DAC_TriangleAmplitude_2047;
+  DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Disable;
+  DAC_Init(DAC_Channel_1, &DAC_InitStructure);
+
+  /* DAC channel2 Configuration */
+  DAC_InitStructure.DAC_LFSRUnmask_TriangleAmplitude = DAC_TriangleAmplitude_1023;
+  DAC_Init(DAC_Channel_2, &DAC_InitStructure);
+
+  /* Enable DAC Channel1: Once the DAC channel1 is enabled, PA.04 is 
+     automatically connected to the DAC converter. */
+  DAC_Cmd(DAC_Channel_1, ENABLE);
+
+  /* Enable DAC Channel2: Once the DAC channel2 is enabled, PA.05 is 
+     automatically connected to the DAC converter. */
+  DAC_Cmd(DAC_Channel_2, ENABLE);
+
+  /* Set DAC dual channel DHR12RD register */
+  DAC_SetDualChannelData(DAC_Align_12b_R, 0x100, 0x100);
+
+  /* TIM2 enable counter */
+  TIM_Cmd(TIM2, ENABLE);
+
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  Configures the different system clocks.
+  * @param  None
+  * @retval None
+  */
+void RCC_Configuration(void)
+{   
+  /* Enable peripheral clocks ------------------------------------------------*/
+  /* GPIOA Periph clock enable */
+  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
+  /* DAC Periph clock enable */
+  RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
+  /* TIM2 Periph clock enable */
+  RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
+}
+
+/**
+  * @brief  Configures the different GPIO ports.
+  * @param  None
+  * @retval None
+  */
+void GPIO_Configuration(void)
+{
+  GPIO_InitTypeDef GPIO_InitStructure;
+
+  /* Once the DAC channel is enabled, the corresponding GPIO pin is automatically 
+     connected to the DAC converter. In order to avoid parasitic consumption, 
+     the GPIO pin should be configured in analog */
+  GPIO_InitStructure.GPIO_Pin =  GPIO_Pin_4 | GPIO_Pin_5;
+  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
+  GPIO_Init(GPIOA, &GPIO_InitStructure);
+}
+
+/**
+  * @brief  Inserts a delay time.
+  * @param  nCount: specifies the delay time length.
+  * @retval None
+  */
+void Delay(__IO uint32_t nCount)
+{
+  for(; nCount != 0; nCount--);
+}
+
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *         where the assert_param error has occurred.
+  * @param  file: pointer to the source file name
+  * @param  line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t* file, uint32_t line)
+{ 
+  /* User can add his own implementation to report the file name and line number,
+     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+
+  /* Infinite loop */
+  while (1)
+  {
+  }
+}
+
+#endif
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/readme.txt
new file mode 100644
index 0000000..fb3dd97
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/readme.txt
@@ -0,0 +1,105 @@
+/**
+  @page DAC_TwoChannels_TriangleWave DAC two channels triangle wave example
+  
+  @verbatim
+  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
+  * @file    DAC/TwoChannels_TriangleWave/readme.txt 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Description of the DAC two channels triangle wave example.
+  ******************************************************************************
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  ******************************************************************************
+   @endverbatim
+
+@par Example Description 
+
+This example describes how to use two DAC channels to generate two different
+signals with triangle waves on each DAC Channel output.
+
+DAC channels conversion are configured to be triggered by TIM2 TRGO with triangle
+wave generation. 12bit right data alignment is selected since we choose to access
+both DAC_DHR12R1 and DAC_DHR12R2 registers.
+A triangle amplitude of 2047 is selected for DAC channel1 and 1023 for DAC channel2.
+Both DAC channels are then enabled. DAC Channel1 DHR12R1 and DAC channel2 DHR12R2
+registers are set to have a base output voltage of VREF/16 on each output.
+
+Once TIM2 is enabled, each TIM2 TRGO update event trigger both DAC channels start
+of conversion. The triangle counter is incremented, added to the base value and
+applied to the corresponding DAC channel output. The same calculation is repeated
+on each trigger.
+The triangle waves can be visualized by connecting both PA.04 and PA.05 pins to
+an oscilloscope.
+
+
+@par Directory contents 
+
+  - DAC/TwoChannels_TriangleWave/stm32f10x_conf.h     Library Configuration file
+  - DAC/TwoChannels_TriangleWave/stm32f10x_it.c       Interrupt handlers
+  - DAC/TwoChannels_TriangleWave/stm32f10x_it.h       Header for stm32f10x_it.c
+  - DAC/TwoChannels_TriangleWave/main.c               Main program
+  - DAC/TwoChannels_TriangleWave/system_stm32f10x.c   STM32F10x system source file
+
+@par Hardware and Software environment 
+
+  - This example runs on STM32F10x Connectivity line, High-Density, XL-Density,
+    Medium-Density Value line, High-Density Value line and Low-Density Value 
+    line Devices.
+  
+  - This example has been tested with STMicroelectronics STM32100B-EVAL 
+    (Medium-Density Value line), STM3210C-EVAL (Connectivity line), STM32100E-EVAL 
+    (High-Density Value line) and STM3210E-EVAL (High-Density and XL-Density) 
+    evaluation boards and can be easily tailored to any other supported device 
+    and development board.  
+
+  - STM32100B-EVAL Set-up  
+    - Connect PA.04 and PA.05 pins to an oscilloscope 
+    @note JP2 should be open
+    
+  - STM3210C-EVAL Set-up  
+    - Only PA.04 can be monitored on an oscilloscope, PA.05 is used by other
+      module (Motor control connector) that prevents to have DAC channel output
+      on it. However, if you don't use Motor control connector, you can remove
+      the 0ohm resistor R84 and thus PA.05 can be used for DAC output.
+    @note Make shure that jumper JP15 is open.
+    
+  - STM3210E-EVAL Set-up 
+    - Connect PA.04 and PA.05 pins to an oscilloscope  
+	
+  - STM32100E-EVAL Set-up 
+    - Connect PA.04 and PA.05 pins to an oscilloscope      
+    
+@par How to use it ? 
+
+In order to make the program work, you must do the following :
+ - Copy all source files from this example folder to the template folder under
+   Project\STM32F10x_StdPeriph_Template
+ - Open your preferred toolchain 
+ - Rebuild all files and load your image into target memory
+ - Run the example 
+
+@note
+ - Low-density Value line devices are STM32F100xx microcontrollers where the 
+   Flash memory density ranges between 16 and 32 Kbytes.
+ - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
+   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
+ - Medium-density Value line devices are STM32F100xx microcontrollers where
+   the Flash memory density ranges between 64 and 128 Kbytes.  
+ - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
+   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
+ - High-density Value line devices are STM32F100xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes.
+ - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes.
+ - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 512 and 1024 Kbytes.
+ - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
+    
+ * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
+ */
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/stm32f10x_conf.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/stm32f10x_conf.h
new file mode 100644
index 0000000..0fb1fe6
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/stm32f10x_conf.h
@@ -0,0 +1,77 @@
+/**
+  ******************************************************************************
+  * @file    DAC/TwoChannels_TriangleWave/stm32f10x_conf.h 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Library configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CONF_H
+#define __STM32F10x_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
+#include "stm32f10x_adc.h"
+#include "stm32f10x_bkp.h"
+#include "stm32f10x_can.h"
+#include "stm32f10x_cec.h"
+#include "stm32f10x_crc.h"
+#include "stm32f10x_dac.h"
+#include "stm32f10x_dbgmcu.h"
+#include "stm32f10x_dma.h"
+#include "stm32f10x_exti.h"
+#include "stm32f10x_flash.h"
+#include "stm32f10x_fsmc.h"
+#include "stm32f10x_gpio.h"
+#include "stm32f10x_i2c.h"
+#include "stm32f10x_iwdg.h"
+#include "stm32f10x_pwr.h"
+#include "stm32f10x_rcc.h"
+#include "stm32f10x_rtc.h"
+#include "stm32f10x_sdio.h"
+#include "stm32f10x_spi.h"
+#include "stm32f10x_tim.h"
+#include "stm32f10x_usart.h"
+#include "stm32f10x_wwdg.h"
+#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to expanse the "assert_param" macro in the 
+   Standard Peripheral Library drivers code */
+/* #define USE_FULL_ASSERT    1 */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function which reports 
+  *         the name of the source file and the source line number of the call 
+  *         that failed. If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#endif /* __STM32F10x_CONF_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/stm32f10x_it.c
new file mode 100644
index 0000000..b38697d
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/stm32f10x_it.c
@@ -0,0 +1,168 @@
+/**
+  ******************************************************************************
+  * @file    DAC/TwoChannels_TriangleWave/stm32f10x_it.c 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Main Interrupt Service Routines.
+  *          This file provides template for all exceptions handler and peripherals
+  *          interrupt service routine.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_it.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Examples
+  * @{
+  */
+
+/** @addtogroup DAC_TwoChannels_TriangleWave
+  * @{
+  */ 
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/******************************************************************************/
+/*            Cortex-M3 Processor Exceptions Handlers                         */
+/******************************************************************************/
+
+
+/**
+  * @brief  This function handles NMI exception.
+  * @param  None
+  * @retval None
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles Hard Fault exception.
+  * @param  None
+  * @retval None
+  */
+void HardFault_Handler(void)
+{
+  /* Go to infinite loop when Hard Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Memory Manage exception.
+  * @param  None
+  * @retval None
+  */
+void MemManage_Handler(void)
+{
+  /* Go to infinite loop when Memory Manage exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Bus Fault exception.
+  * @param  None
+  * @retval None
+  */
+void BusFault_Handler(void)
+{
+  /* Go to infinite loop when Bus Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Usage Fault exception.
+  * @param  None
+  * @retval None
+  */
+void UsageFault_Handler(void)
+{
+  /* Go to infinite loop when Usage Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles SVCall exception.
+  * @param  None
+  * @retval None
+  */
+void SVC_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles Debug Monitor exception.
+  * @param  None
+  * @retval None
+  */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles PendSV_Handler exception.
+  * @param  None
+  * @retval None
+  */
+void PendSV_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles SysTick Handler.
+  * @param  None
+  * @retval None
+  */
+void SysTick_Handler(void)
+{
+}
+
+/******************************************************************************/
+/*                 STM32F10x Peripherals Interrupt Handlers                   */
+/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
+/*  available peripheral interrupt handler's name please refer to the startup */
+/*  file (startup_stm32f10x_xx.s).                                            */
+/******************************************************************************/
+
+/**
+  * @brief  This function handles PPP interrupt request.
+  * @param  None
+  * @retval None
+  */
+/*void PPP_IRQHandler(void)
+{
+}*/
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/stm32f10x_it.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/stm32f10x_it.h
new file mode 100644
index 0000000..df6a0ee
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/stm32f10x_it.h
@@ -0,0 +1,46 @@
+/**
+  ******************************************************************************
+  * @file    DAC/TwoChannels_TriangleWave/stm32f10x_it.h 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_IT_H
+#define __STM32F10x_IT_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+					 
+#endif /* __STM32F10x_IT_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/system_stm32f10x.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/system_stm32f10x.c
new file mode 100644
index 0000000..c68050a
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/DAC/TwoChannels_TriangleWave/system_stm32f10x.c
@@ -0,0 +1,1094 @@
+/**
+  ******************************************************************************
+  * @file    DAC/TwoChannels_TriangleWave/system_stm32f10x.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+  * 
+  * 1.  This file provides two functions and one global variable to be called from 
+  *     user application:
+  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
+  *                      factors, AHB/APBx prescalers and Flash settings). 
+  *                      This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f10x_xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+  *    Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to
+  *    configure the system clock before to branch to main program.
+  *
+  * 3. If the system clock source selected by user fails to startup, the SystemInit()
+  *    function will do nothing and HSI still used as system clock source. User can 
+  *    add some code to deal with this issue inside the SetSysClock() function.
+  *
+  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on
+  *    the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. 
+  *    When HSE is used as system clock source, directly or through PLL, and you
+  *    are using different crystal you have to adapt the HSE value to your own
+  *    configuration.
+  *        
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f10x_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F10x_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f10x.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Defines
+  * @{
+  */
+
+/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
+   frequency (after reset the HSI is used as SYSCLK source)
+   
+   IMPORTANT NOTE:
+   ============== 
+   1. After each device reset the HSI is used as System clock source.
+
+   2. Please make sure that the selected System clock doesn't exceed your device's
+      maximum frequency.
+      
+   3. If none of the define below is enabled, the HSI is used as System clock
+    source.
+
+   4. The System clock configuration functions provided within this file assume that:
+        - For Low, Medium and High density Value line devices an external 8MHz 
+          crystal is used to drive the System clock.
+        - For Low, Medium and High density devices an external 8MHz crystal is
+          used to drive the System clock.
+        - For Connectivity line devices an external 25MHz crystal is used to drive
+          the System clock.
+     If you are using different crystal you have to adapt those functions accordingly.
+    */
+    
+#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
+ #define SYSCLK_FREQ_24MHz  24000000
+#else
+/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
+/* #define SYSCLK_FREQ_24MHz  24000000 */ 
+/* #define SYSCLK_FREQ_36MHz  36000000 */
+/* #define SYSCLK_FREQ_48MHz  48000000 */
+/* #define SYSCLK_FREQ_56MHz  56000000 */
+#define SYSCLK_FREQ_72MHz  72000000
+#endif
+
+/*!< Uncomment the following line if you need to use external SRAM mounted
+     on STM3210E-EVAL board (STM32 High density and XL-density devices) or on 
+     STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ 
+#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
+/* #define DATA_IN_ExtSRAM */
+#endif
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */ 
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x0 /*!< Vector Table base offset field. 
+                                  This value must be a multiple of 0x200. */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Variables
+  * @{
+  */
+
+/*******************************************************************************
+*  Clock Definitions
+*******************************************************************************/
+#ifdef SYSCLK_FREQ_HSE
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_HSE;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_24MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_24MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_36MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_36MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_48MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_48MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_56MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_56MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_72MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_72MHz;        /*!< System Clock Frequency (Core Clock) */
+#else /*!< HSI Selected as System Clock source */
+  uint32_t SystemCoreClock         = HSI_VALUE;        /*!< System Clock Frequency (Core Clock) */
+#endif
+
+__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_FunctionPrototypes
+  * @{
+  */
+
+static void SetSysClock(void);
+
+#ifdef SYSCLK_FREQ_HSE
+  static void SetSysClockToHSE(void);
+#elif defined SYSCLK_FREQ_24MHz
+  static void SetSysClockTo24(void);
+#elif defined SYSCLK_FREQ_36MHz
+  static void SetSysClockTo36(void);
+#elif defined SYSCLK_FREQ_48MHz
+  static void SetSysClockTo48(void);
+#elif defined SYSCLK_FREQ_56MHz
+  static void SetSysClockTo56(void);  
+#elif defined SYSCLK_FREQ_72MHz
+  static void SetSysClockTo72(void);
+#endif
+
+#ifdef DATA_IN_ExtSRAM
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the Embedded Flash Interface, the PLL and update the 
+  *         SystemCoreClock variable.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
+  /* Set HSION bit */
+  RCC->CR |= (uint32_t)0x00000001;
+
+  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#ifndef STM32F10X_CL
+  RCC->CFGR &= (uint32_t)0xF8FF0000;
+#else
+  RCC->CFGR &= (uint32_t)0xF0FF0000;
+#endif /* STM32F10X_CL */   
+  
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+  RCC->CFGR &= (uint32_t)0xFF80FFFF;
+
+#ifdef STM32F10X_CL
+  /* Reset PLL2ON and PLL3ON bits */
+  RCC->CR &= (uint32_t)0xEBFFFFFF;
+
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x00FF0000;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000;
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000;      
+#else
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000;
+#endif /* STM32F10X_CL */
+    
+#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
+  #ifdef DATA_IN_ExtSRAM
+    SystemInit_ExtMemCtl(); 
+  #endif /* DATA_IN_ExtSRAM */
+#endif 
+
+  /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
+  /* Configure the Flash Latency cycles and enable prefetch buffer */
+  SetSysClock();
+
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
+#endif 
+}
+
+/**
+  * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
+  *             8 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
+  *              8 MHz or 25 MHz, depedning on the product used), user has to ensure
+  *              that HSE_VALUE is same as the real frequency of the crystal used.
+  *              Otherwise, this function may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0, pllmull = 0, pllsource = 0;
+
+#ifdef  STM32F10X_CL
+  uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+  uint32_t prediv1factor = 0;
+#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
+    
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+  
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock */
+
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+      
+#ifndef STM32F10X_CL      
+      pllmull = ( pllmull >> 18) + 2;
+      
+      if (pllsource == 0x00)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+      }
+      else
+      {
+ #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
+       /* HSE oscillator clock selected as PREDIV1 clock entry */
+       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
+ #else
+        /* HSE selected as PLL clock entry */
+        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
+        {/* HSE oscillator clock divided by 2 */
+          SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
+        }
+        else
+        {
+          SystemCoreClock = HSE_VALUE * pllmull;
+        }
+ #endif
+      }
+#else
+      pllmull = pllmull >> 18;
+      
+      if (pllmull != 0x0D)
+      {
+         pllmull += 2;
+      }
+      else
+      { /* PLL multiplication factor = PLL input clock * 6.5 */
+        pllmull = 13 / 2; 
+      }
+            
+      if (pllsource == 0x00)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+      }
+      else
+      {/* PREDIV1 selected as PLL clock entry */
+        
+        /* Get PREDIV1 clock source and division factor */
+        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
+        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
+        
+        if (prediv1source == 0)
+        { 
+          /* HSE oscillator clock selected as PREDIV1 clock entry */
+          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
+        }
+        else
+        {/* PLL2 clock selected as PREDIV1 clock entry */
+          
+          /* Get PREDIV2 division factor and PLL2 multiplication factor */
+          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
+          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 
+          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
+        }
+      }
+#endif /* STM32F10X_CL */ 
+      break;
+
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  
+  /* Compute HCLK clock frequency ----------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;  
+}
+
+/**
+  * @brief  Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClock(void)
+{
+#ifdef SYSCLK_FREQ_HSE
+  SetSysClockToHSE();
+#elif defined SYSCLK_FREQ_24MHz
+  SetSysClockTo24();
+#elif defined SYSCLK_FREQ_36MHz
+  SetSysClockTo36();
+#elif defined SYSCLK_FREQ_48MHz
+  SetSysClockTo48();
+#elif defined SYSCLK_FREQ_56MHz
+  SetSysClockTo56();  
+#elif defined SYSCLK_FREQ_72MHz
+  SetSysClockTo72();
+#endif
+ 
+ /* If none of the define above is enabled, the HSI is used as System clock
+    source (default after reset) */ 
+}
+
+/**
+  * @brief  Setup the external memory controller. Called in startup_stm32f10x.s 
+  *          before jump to __main
+  * @param  None
+  * @retval None
+  */ 
+#ifdef DATA_IN_ExtSRAM
+/**
+  * @brief  Setup the external memory controller. 
+  *         Called in startup_stm32f10x_xx.s/.c before jump to main.
+  * 	      This function configures the external SRAM mounted on STM3210E-EVAL
+  *         board (STM32 High density devices). This SRAM will be used as program
+  *         data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */ 
+void SystemInit_ExtMemCtl(void) 
+{
+/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
+  required, then adjust the Register Addresses */
+
+  /* Enable FSMC clock */
+  RCC->AHBENR = 0x00000114;
+  
+  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */  
+  RCC->APB2ENR = 0x000001E0;
+  
+/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
+/*----------------  SRAM Address lines configuration -------------------------*/
+/*----------------  NOE and NWE configuration --------------------------------*/  
+/*----------------  NE3 configuration ----------------------------------------*/
+/*----------------  NBL0, NBL1 configuration ---------------------------------*/
+  
+  GPIOD->CRL = 0x44BB44BB;  
+  GPIOD->CRH = 0xBBBBBBBB;
+
+  GPIOE->CRL = 0xB44444BB;  
+  GPIOE->CRH = 0xBBBBBBBB;
+
+  GPIOF->CRL = 0x44BBBBBB;  
+  GPIOF->CRH = 0xBBBB4444;
+
+  GPIOG->CRL = 0x44BBBBBB;  
+  GPIOG->CRH = 0x44444B44;
+   
+/*----------------  FSMC Configuration ---------------------------------------*/  
+/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
+  
+  FSMC_Bank1->BTCR[4] = 0x00001011;
+  FSMC_Bank1->BTCR[5] = 0x00000200;
+}
+#endif /* DATA_IN_ExtSRAM */
+
+#ifdef SYSCLK_FREQ_HSE
+/**
+  * @brief  Selects HSE as System clock source and configure HCLK, PCLK2
+  *          and PCLK1 prescalers.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockToHSE(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 0 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+
+#ifndef STM32F10X_CL
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+#else
+    if (HSE_VALUE <= 24000000)
+	{
+      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+	}
+	else
+	{
+      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
+	}
+#endif /* STM32F10X_CL */
+#endif
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+    /* Select HSE as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE;    
+
+    /* Wait till HSE is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  }  
+}
+#elif defined SYSCLK_FREQ_24MHz
+/**
+  * @brief  Sets System clock frequency to 24MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo24(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL 
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 0 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;    
+#endif
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL6); 
+
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */       
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }   
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6);
+#else    
+    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+#elif defined SYSCLK_FREQ_36MHz
+/**
+  * @brief  Sets System clock frequency to 36MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo36(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 1 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    
+    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL9); 
+
+	/*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+#else    
+    /*  PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+#elif defined SYSCLK_FREQ_48MHz
+/**
+  * @brief  Sets System clock frequency to 48MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo48(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 1 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL6); 
+#else    
+    /*  PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+
+#elif defined SYSCLK_FREQ_56MHz
+/**
+  * @brief  Sets System clock frequency to 56MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo56(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/   
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 2 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL7); 
+#else     
+    /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7);
+
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+
+#elif defined SYSCLK_FREQ_72MHz
+/**
+  * @brief  Sets System clock frequency to 72MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo72(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 2 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
+
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL9); 
+#else    
+    /*  PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |
+                                        RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+    
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  }
+}
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */    
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
-- 
cgit v1.2.3