From afbb4cc73c44b6321cae39dbe46b97155805097d Mon Sep 17 00:00:00 2001
From: Trygve Laugstøl <trygvis@inamo.no>
Date: Sun, 13 Dec 2015 21:03:11 +0100
Subject: wip

---
 .../FSMC/OneNAND/readme.txt                        | 85 ++++++++++++++++++++++
 1 file changed, 85 insertions(+)
 create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FSMC/OneNAND/readme.txt

(limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FSMC/OneNAND/readme.txt')

diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FSMC/OneNAND/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FSMC/OneNAND/readme.txt
new file mode 100644
index 0000000..ae132d3
--- /dev/null
+++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/FSMC/OneNAND/readme.txt
@@ -0,0 +1,85 @@
+/**
+  @page FSMC_OneNAND FSMC OneNAND example
+  
+  @verbatim
+  ******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
+  * @file    FSMC/OneNAND/readme.txt 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Description of the FSMC OneNAND example.
+  ******************************************************************************
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  ******************************************************************************
+   @endverbatim
+
+@par Example Description 
+
+This example shows how to configure the FSMC to drive the OneNAND memory mounted 
+on STM32100E-EVAL board. 
+
+In this example a basic example of how to use the FSMC firmware library and
+an associate driver to perform read/write operations on the KFG1216U2A/B-DIB6 
+OneNAND memory.
+
+The different OneNAND memory operations (Unlock, Erase, Write, Read) results are 
+signalled using four LEDs as follows:
+     - LED2, LED3 and LED4 are ON: OneNAND ID read failed
+     - LED3 and LED4 ON: Unlock Block failed
+     - LED2 and LED4 ON: Erase Block failed
+     - LED4 ON: Write Buffer failed
+     - LED2 ON: Asynchronous Read failed
+     - LED3 ON: Synchronous Read 
+     - LED1 ON: All OneNAND memory operations are OK
+
+
+@par Directory contents
+
+  - FSMC/OneNAND/stm32f10x_conf.h     Library Configuration file
+  - FSMC/OneNAND/stm32f10x_it.c       Interrupt handlers
+  - FSMC/OneNAND/stm32f10x_it.h       Header for stm32f10x_it.c
+  - FSMC/OneNAND/main.c               Main program
+  - FSMC/OneNAND/system_stm32f10x.c   STM32F10x system source file
+
+@par Hardware and Software environment 
+
+  - This example runs on STM32F10x High-density value line Devices.
+  
+  - This example has been tested with STM32100E-EVAL and can be easily tailored
+    to any other development board.
+    Make sure that the jumper JP6 is in position 2<->3
+
+    
+@par How to use it ? 
+
+In order to make the program work, you must do the following :
+ - Copy all source files from this example folder to the template folder under
+   Project\STM32F10x_StdPeriph_Template
+ - Open your preferred toolchain 
+ - Rebuild all files and load your image into target memory
+ - Run the example 
+
+@note
+ - Low-density Value line devices are STM32F100xx microcontrollers where the 
+   Flash memory density ranges between 16 and 32 Kbytes.
+ - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
+   microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
+ - Medium-density Value line devices are STM32F100xx microcontrollers where
+   the Flash memory density ranges between 64 and 128 Kbytes.  
+ - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx 
+   microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
+ - High-density Value line devices are STM32F100xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes.  
+ - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes. 
+ - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 512 and 1024 Kbytes.
+ - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
+
+ * <h3><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h3>
+ */
-- 
cgit v1.2.3