From 2fff65aed2477a503c72629d27e2a330d30c02d1 Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Wed, 25 Jan 2017 22:23:13 +0100 Subject: o Seemingly working Mutexes. o Dropping the privileged/unprivileged split for now. --- .../GPIO/IOToggle/readme.txt | 87 ----------- .../GPIO/IOToggle/stm32f10x_conf.h | 77 ---------- .../GPIO/IOToggle/stm32f10x_it.c | 167 --------------------- 3 files changed, 331 deletions(-) delete mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/GPIO/IOToggle/readme.txt delete mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/GPIO/IOToggle/stm32f10x_conf.h delete mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/GPIO/IOToggle/stm32f10x_it.c (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/GPIO/IOToggle') diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/GPIO/IOToggle/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/GPIO/IOToggle/readme.txt deleted file mode 100644 index bdaa5d7..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/GPIO/IOToggle/readme.txt +++ /dev/null @@ -1,87 +0,0 @@ -/** - @page GPIO_IOToggle GPIO IO Toggle example - - @verbatim - ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* - * @file GPIO/IOToggle/readme.txt - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Description of the GPIO IO Toggle example. - ****************************************************************************** - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - ****************************************************************************** - @endverbatim - -@par Example Description - -GPIO ports are connected on APB2 bus, using BSRRH and BSRRL registers 2 cycles -are required to set a pin and another cycle to reset it. So GPIO pins can toggle -at AHB clock divided by 4. - -This example describes how to use BSRR and BRR (Port Bit Set/Reset Register -and Port Bit Reset Register) for maximum IO toggling. - -PD0 and PD2 (configured in output pushpull mode) toggles in a forever loop: - - Set PD0 and PD2 by setting corresponding bits in BSRR register - - Reset PD0 and PD2 by setting corresponding bits in BRR register - -In this example, HCLK is configured at 72 MHz so PD0 and PD2 toggles at 18MHz. -To achieve the maximum IO toggling frequency, you have to configure your compiler -options for high speed optimization. - -@par Directory contents - - - GPIO/IOToggle/stm32f10x_conf.h Library Configuration file - - GPIO/IOToggle/stm32f10x_it.c Interrupt handlers - - GPIO/IOToggle/stm32f10x_it.h Header for stm32f10x_it.c - - GPIO/IOToggle/main.c Main program - - GPIO/IOToggle/system_stm32f10x.c STM32F10x system source file - -@par Hardware and Software environment - - - This example runs on STM32F10x Connectivity line, High-Density, High-Density - Value line, Medium-Density, XL-Density, Medium-Density Value line, Low-Density - and Low-Density Value line Devices. - - - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density - Value line), STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL - (Connectivity line), STM3210E-EVAL (High-Density and XL-Density) and - STM3210B-EVAL (Medium-Density) evaluation boards and can be easily tailored - to any other supported device and development board. - To select the STMicroelectronics evaluation board used to run the example, - uncomment the corresponding line in stm32_eval.h file (under Utilities\STM32_EVAL) - -@par How to use it ? - -In order to make the program work, you must do the following : - - Copy all source files from this example folder to the template folder under - Project\STM32F10x_StdPeriph_Template - - Open your preferred toolchain - - Rebuild all files and load your image into target memory - - Run the example - -@note - - Low-density Value line devices are STM32F100xx microcontrollers where the - Flash memory density ranges between 16 and 32 Kbytes. - - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx - microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. - - Medium-density Value line devices are STM32F100xx microcontrollers where - the Flash memory density ranges between 64 and 128 Kbytes. - - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx - microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. - - High-density Value line devices are STM32F100xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - High-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 512 and 1024 Kbytes. - - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. - - *

© COPYRIGHT 2011 STMicroelectronics

- */ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/GPIO/IOToggle/stm32f10x_conf.h b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/GPIO/IOToggle/stm32f10x_conf.h deleted file mode 100644 index 9fd706d..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/GPIO/IOToggle/stm32f10x_conf.h +++ /dev/null @@ -1,77 +0,0 @@ -/** - ****************************************************************************** - * @file GPIO/IOToggle/stm32f10x_conf.h - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Library configuration file. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2011 STMicroelectronics

- ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CONF_H -#define __STM32F10x_CONF_H - -/* Includes ------------------------------------------------------------------*/ -/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */ -#include "stm32f10x_adc.h" -#include "stm32f10x_bkp.h" -#include "stm32f10x_can.h" -#include "stm32f10x_cec.h" -#include "stm32f10x_crc.h" -#include "stm32f10x_dac.h" -#include "stm32f10x_dbgmcu.h" -#include "stm32f10x_dma.h" -#include "stm32f10x_exti.h" -#include "stm32f10x_flash.h" -#include "stm32f10x_fsmc.h" -#include "stm32f10x_gpio.h" -#include "stm32f10x_i2c.h" -#include "stm32f10x_iwdg.h" -#include "stm32f10x_pwr.h" -#include "stm32f10x_rcc.h" -#include "stm32f10x_rtc.h" -#include "stm32f10x_sdio.h" -#include "stm32f10x_spi.h" -#include "stm32f10x_tim.h" -#include "stm32f10x_usart.h" -#include "stm32f10x_wwdg.h" -#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line below to expanse the "assert_param" macro in the - Standard Peripheral Library drivers code */ -/* #define USE_FULL_ASSERT 1 */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT - -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function which reports - * the name of the source file and the source line number of the call - * that failed. If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0) -#endif /* USE_FULL_ASSERT */ - -#endif /* __STM32F10x_CONF_H */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/GPIO/IOToggle/stm32f10x_it.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/GPIO/IOToggle/stm32f10x_it.c deleted file mode 100644 index 56fbc9b..0000000 --- a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/GPIO/IOToggle/stm32f10x_it.c +++ /dev/null @@ -1,167 +0,0 @@ -/** - ****************************************************************************** - * @file GPIO/IOToggle/stm32f10x_it.c - * @author MCD Application Team - * @version V3.5.0 - * @date 08-April-2011 - * @brief Main Interrupt Service Routines. - * This file provides template for all exceptions handler and peripherals - * interrupt service routine. - ****************************************************************************** - * @attention - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2011 STMicroelectronics

- ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" - -/** @addtogroup STM32F10x_StdPeriph_Examples - * @{ - */ - -/** @addtogroup GPIO_IOToggle - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************/ -/* Cortex-M3 Processor Exceptions Handlers */ -/******************************************************************************/ - -/** - * @brief This function handles NMI exception. - * @param None - * @retval None - */ -void NMI_Handler(void) -{ -} - -/** - * @brief This function handles Hard Fault exception. - * @param None - * @retval None - */ -void HardFault_Handler(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Memory Manage exception. - * @param None - * @retval None - */ -void MemManage_Handler(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Bus Fault exception. - * @param None - * @retval None - */ -void BusFault_Handler(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Usage Fault exception. - * @param None - * @retval None - */ -void UsageFault_Handler(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles SVCall exception. - * @param None - * @retval None - */ -void SVC_Handler(void) -{ -} - -/** - * @brief This function handles Debug Monitor exception. - * @param None - * @retval None - */ -void DebugMon_Handler(void) -{ -} - -/** - * @brief This function handles PendSV_Handler exception. - * @param None - * @retval None - */ -void PendSV_Handler(void) -{ -} - -/** - * @brief This function handles SysTick Handler. - * @param None - * @retval None - */ -void SysTick_Handler(void) -{ -} - -/******************************************************************************/ -/* STM32F10x Peripherals Interrupt Handlers */ -/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ -/* available peripheral interrupt handler's name please refer to the startup */ -/* file (startup_stm32f10x_xx.s). */ -/******************************************************************************/ - -/** - * @brief This function handles PPP interrupt request. - * @param None - * @retval None - */ -/*void PPP_IRQHandler(void) -{ -}*/ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3