From afbb4cc73c44b6321cae39dbe46b97155805097d Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Sun, 13 Dec 2015 21:03:11 +0100 Subject: wip --- .../SPI/Simplex_Interrupt/readme.txt | 118 +++++++++++++++++++++ 1 file changed, 118 insertions(+) create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/SPI/Simplex_Interrupt/readme.txt (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/SPI/Simplex_Interrupt/readme.txt') diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/SPI/Simplex_Interrupt/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/SPI/Simplex_Interrupt/readme.txt new file mode 100644 index 0000000..09e717c --- /dev/null +++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/SPI/Simplex_Interrupt/readme.txt @@ -0,0 +1,118 @@ +/** + @page SPI_Simplex_Interrupt SPI Simplex Interrupt example + + @verbatim + ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* + * @file SPI/Simplex_Interrupt/readme.txt + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Description of the SPI Simplex Interrupt example. + ****************************************************************************** + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + ****************************************************************************** + @endverbatim + +@par Example Description + +This example provides a description of how to set a communication between two +SPIs in simplex mode and performs a data buffer transfer from SPI_MASTER to +SPI_SLAVE using TxE interrupt for master and RxNE interrupt for slave. +SPI_MASTER and SPI_SLAVE can be SPI1 and SPI2 or SPI3 and SPI2, depending on the +STMicroelectronics EVAL board you are using. + +Both SPIs are configured with 8bit data frame and a 9Mbit/s communication speed +(for Value line devices the communication speed is set to 3Mbit/s). +The TxE interrupt is enabled for the master and the RxNE interrupt is enabled for +the slave. + +Once both SPIs are enabled, first TxE interrupt is generated for the master +and in its interrupt service routine the first data is sent from SPI_MASTER_Buffer_Tx. +Once this data is received by the slave the RxNE interrupt is generated and in +the routine this data is stored in the SPI_SLAVE_Buffer_Rx. + +The same procedure is followed for the remaining SPI_MASTER_Buffer_Tx data. +Once all data buffer are received by the slave the TxE interrupt is disabled. +A comparison is done and TransferStatus variable gives the data transfer status +where it is PASSED if transmitted and received data are the same otherwise it is FAILED. + + +@par Directory contents + + - SPI/Simplex_Interrupt/platform_config.h Evaluation board specific configuration file + - SPI/Simplex_Interrupt/stm32f10x_conf.h Library Configuration file + - SPI/Simplex_Interrupt/stm32f10x_it.c Interrupt handlers + - SPI/Simplex_Interrupt/stm32f10x_it.h Header for stm32f10x_it.c + - SPI/Simplex_Interrupt/main.c Main program + - SPI/Simplex_Interrupt/system_stm32f10x.c STM32F10x system source file + +@par Hardware and Software environment + + - This example runs on STM32F10x Connectivity line, High-Density, High-Density + Value line, Medium-Density, XL-Density, Medium-Density Value line, Low-Density + and Low-Density Value line Devices. + + - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density + Value line), STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL (Connectivity line), + STM3210E-EVAL (High-Density and XL-Density) and STM3210B-EVAL (Medium-Density) + evaluation boards and can be easily tailored to any other supported device + and development board. + To select the STMicroelectronics evaluation board used to run the example, + uncomment the corresponding line in SPI/Simplex_Interrupt/platform_config.h file. + + - STM32100E-EVAL Set-up + - Connect SPI1 SCK pin (PA.05) to SPI2 SCK pin (PB.13) + - Connect SPI1 MOSI pin (PA.07) to SPI2 MISO pin (PB.14) + + - STM32100B-EVAL Set-up + - Connect SPI1 SCK pin (PA.05) to SPI2 SCK pin (PB.13) + - Connect SPI1 MOSI pin (PA.07) to SPI2 MISO pin (PB.14) + + - STM3210C-EVAL Set-up + - Connect SPI3 SCK pin (PC.10) to SPI2 SCK pin (PB.13) + - Connect SPI3 MOSI pin (PC.12) to SPI2 MISO pin (PB.14) + @note In this case SPI3 pins are remapped by software. + + - STM3210E-EVAL Set-up + - Connect SPI1 SCK pin (PA.05) to SPI2 SCK pin (PB.13) + - Connect SPI1 MOSI pin (PA.07) to SPI2 MISO pin (PB.14) + @note The jumper 14 (USB Disconnect) must be set in position 1<->2 in order + to not interfer with SPI2 MISO pin PB14. + + - STM3210B-EVAL Set-up + - Connect SPI1 SCK pin (PA.05) to SPI2 SCK pin (PB.13) + - Connect SPI1 MOSI pin (PA.07) to SPI2 MISO pin (PB.14) + +@par How to use it ? + +In order to make the program work, you must do the following : + - Copy all source files from this example folder to the template folder under + Project\STM32F10x_StdPeriph_Template + - Open your preferred toolchain + - Rebuild all files and load your image into target memory + - Run the example + +@note + - Low-density Value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 16 and 32 Kbytes. + - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. + - Medium-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 64 and 128 Kbytes. + - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. + - High-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - High-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 512 and 1024 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + + *

© COPYRIGHT 2011 STMicroelectronics

+ */ -- cgit v1.2.3