From afbb4cc73c44b6321cae39dbe46b97155805097d Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Sun, 13 Dec 2015 21:03:11 +0100 Subject: wip --- .../TIM/OnePulse/readme.txt | 97 ++++++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/OnePulse/readme.txt (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/OnePulse/readme.txt') diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/OnePulse/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/OnePulse/readme.txt new file mode 100644 index 0000000..2c01dca --- /dev/null +++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/OnePulse/readme.txt @@ -0,0 +1,97 @@ +/** + @page TIM_OnePulse TIM One Pulse example + + @verbatim + ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* + * @file TIM/OnePulse/readme.txt + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Description of the TIM One Pulse example. + ****************************************************************************** + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + ****************************************************************************** + @endverbatim + +@par Example Description + +This example shows how to use the TIM peripheral to generate a One pulse Mode +after a Rising edge of an external signal is received in Timer Input pin. + +TIM2CLK = SystemCoreClock, we want to get TIM2 counter clock at 24 MHz: + - Prescaler = (TIM2CLK / TIM2 counter clock) - 1 +SystemCoreClock is set to 72 MHz for Low-density, Medium-density, High-density +and Connectivity line devices and to 24 MHz for Low-Density Value line, +Medium-Density Value line and High-Density devices. + +The Autoreload value is 65535 (TIM4->ARR), so the maximum frequency value to +trigger the TIM4 input is 24000000/65535 = 300 Hz. + +The TIM4 is configured as follows: +The One Pulse mode is used, the external signal is connected to TIM4 CH2 pin (PB.07), +the rising edge is used as active edge, the One Pulse signal is output +on TIM4_CH1 (PB.06). + +The TIM_Pulse defines the delay value, the delay value is fixed to: +delay = CCR1/TIM4 counter clock = 16383 / 24000000 = 682.6 us. +The (TIM_Period - TIM_Pulse) defines the One Pulse value, the pulse value is fixed to: +One Pulse value = (TIM_Period - TIM_Pulse)/TIM4 counter clock + = (65535 - 16383) / 24000000 = 2.048 ms. + +@par Directory contents + + - TIM/OnePulse/stm32f10x_conf.h Library Configuration file + - TIM/OnePulse/stm32f10x_it.c Interrupt handlers + - TIM/OnePulse/stm32f10x_it.h Interrupt handlers header file + - TIM/OnePulse/main.c Main program + - TIM/OnePulse/system_stm32f10x.c STM32F10x system source file + +@par Hardware and Software environment + + - This example runs on STM32F10x Connectivity line, High-Density, High-Density + Value line, Medium-Density, XL-Density, Medium-Density Value line, Low-Density + and Low-Density Value line Devices. + + - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density + Value line), STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL (Connectivity line), + STM3210E-EVAL (High-Density and XL-Density) and STM3210B-EVAL (Medium-Density) + evaluation boards and can be easily tailored to any other supported device + and development board. + + - STM32100B-EVAL, STM3210E-EVAL, STM3210B-EVAL, STM32100E-EVAL and STM3210C-EVAL Set-up + - Connect the external signal to the TIM4_CH2 pin (PB.07) + - Connect the TIM4_CH1 (PB.06) pin to an oscilloscope to monitor the waveform. + +@par How to use it ? + +In order to make the program work, you must do the following : + - Copy all source files from this example folder to the template folder under + Project\STM32F10x_StdPeriph_Template + - Open your preferred toolchain + - Rebuild all files and load your image into target memory + - Run the example + +@note + - Low-density Value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 16 and 32 Kbytes. + - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. + - Medium-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 64 and 128 Kbytes. + - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. + - High-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - High-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 512 and 1024 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + + *

© COPYRIGHT 2011 STMicroelectronics

+ */ -- cgit v1.2.3