From afbb4cc73c44b6321cae39dbe46b97155805097d Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Sun, 13 Dec 2015 21:03:11 +0100 Subject: wip --- .../TIM/Parallel_Synchro/readme.txt | 117 +++++++++++++++++++++ 1 file changed, 117 insertions(+) create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/Parallel_Synchro/readme.txt (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/Parallel_Synchro/readme.txt') diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/Parallel_Synchro/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/Parallel_Synchro/readme.txt new file mode 100644 index 0000000..4629719 --- /dev/null +++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/TIM/Parallel_Synchro/readme.txt @@ -0,0 +1,117 @@ +/** + @page TIM_Parallel_Synchro TIM Parallel Synchro example + + @verbatim + ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* + * @file TIM/Parallel_Synchro/readme.txt + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Description of the TIM Parallel Synchro example. + ****************************************************************************** + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + ****************************************************************************** + @endverbatim + +@par Example Description + +This example shows how to synchronize TIM peripherals in parallel mode. +In this example three timers are used: + +Timers synchronisation in parallel mode: + +1/TIM2 is configured as Master Timer: + - PWM Mode is used + - The TIM2 Update event is used as Trigger Output + +2/TIM3 and TIM4 are slaves for TIM2, + - PWM Mode is used + - The ITR1(TIM2) is used as input trigger for both slaves + - Gated mode is used, so starts and stops of slaves counters are controlled + by the Master trigger output signal(update event). + +o For Low-density, Medium-density, High-density and Connectivity line devices: + The TIMxCLK is fixed to 72 MHz, the TIM2 counter clock is 72 MHz. + The Master Timer TIM2 is running at TIM2 frequency: + TIM2 frequency = TIM2 counter clock/ (TIM2 period + 1) = 281.250 KHz + and the duty cycle is equal to TIM2_CCR1/(TIM2_ARR + 1) = 25%. + + The TIM3 is running at: + (TIM2 frequency)/ (TIM3 period + 1) = 28.1250 KHz and a duty cycle equal to + TIM3_CCR1/(TIM3_ARR + 1) = 30% + + The TIM4 is running at: + (TIM2 frequency)/ (TIM4 period + 1) = 56.250 KHz and a duty cycle equal to + TIM4_CCR1/(TIM4_ARR + 1) = 60% + +o For Low-Density Value line, Medium-Density Value line and High-Density Value line devices: + The TIMxCLK is fixed to 24 MHz, the TIM2 counter clock is 24 MHz. + TIM2 frequency = 93.75 KHz + TIM3 frequency = 9.375 KHz + TIM4 frequency = 18.75 KHz + +@par Directory contents + + - TIM/Parallel_Synchro/stm32f10x_conf.h Library Configuration file + - TIM/Parallel_Synchro/stm32f10x_it.c Interrupt handlers + - TIM/Parallel_Synchro/stm32f10x_it.h Interrupt handlers header file + - TIM/Parallel_Synchro/main.c Main program + - TIM/Parallel_Synchro/system_stm32f10x.c STM32F10x system source file + +@par Hardware and Software environment + + - This example runs on STM32F10x Connectivity line, High-Density, High-Density + Value line, Medium-Density, XL-Density, Medium-Density Value line, Low-Density + and Low-Density Value line Devices. + + - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density + Value line), STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL (Connectivity line), + STM3210E-EVAL (High-Density and XL-Density) and STM3210B-EVAL (Medium-Density) + evaluation boards and can be easily tailored to any other supported device + and development board. + + - STM3210C-EVAL Set-up + - Connect the pins to an oscilloscope to monitor the different waveforms: + - TIM2 CH1 (PA.00) + - TIM3 CH1 (PC.06) Remapped pin + - TIM4 CH1 (PB.06) + + - STM32100B-EVAL, STM3210E-EVAL, STM32100E-EVAL and STM3210B-EVAL Set-up + - Connect the pins to an oscilloscope to monitor the different waveforms: + - TIM2 CH1 (PA.00) + - TIM3 CH1 (PA.06) + - TIM4 CH1 (PB.06) + +@par How to use it ? + +In order to make the program work, you must do the following : + - Copy all source files from this example folder to the template folder under + Project\STM32F10x_StdPeriph_Template + - Open your preferred toolchain + - Rebuild all files and load your image into target memory + - Run the example + +@note + - Low-density Value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 16 and 32 Kbytes. + - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. + - Medium-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 64 and 128 Kbytes. + - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. + - High-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - High-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 512 and 1024 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + + *

© COPYRIGHT 2011 STMicroelectronics

+ */ -- cgit v1.2.3