From afbb4cc73c44b6321cae39dbe46b97155805097d Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Sun, 13 Dec 2015 21:03:11 +0100 Subject: wip --- .../USART/Interrupt/readme.txt | 117 +++++++++++++++++++++ 1 file changed, 117 insertions(+) create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Interrupt/readme.txt (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Interrupt/readme.txt') diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Interrupt/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Interrupt/readme.txt new file mode 100644 index 0000000..fa9a2a9 --- /dev/null +++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Interrupt/readme.txt @@ -0,0 +1,117 @@ +/** + @page USART_Interrupt USART Interrupts example + + @verbatim + ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* + * @file USART/Interrupt/readme.txt + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Description of the USART Interrupts example. + ****************************************************************************** + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + ****************************************************************************** + @endverbatim + +@par Example Description + +This example provides a basic communication between USARTy and USARTz using +interrupts. USARTy and USARTz can be USART1 and USART2 or USART2 and USART3, +depending on the STMicroelectronics EVAL board you are using. + +USARTz sends TxBuffer2 to USARTy which sends TxBuffer1 to USARTz. The data received +by USARTy and USARTz are stored respectively in RxBuffer1 and RxBuffer2. The data +transfer is managed in USARTy_IRQHandler and USARTz_IRQHandler in stm32f10x_it.c file. + +USARTy and USARTz configured as follow: + - BaudRate = 9600 baud + - Word Length = 8 Bits + - One Stop Bit + - No parity + - Hardware flow control disabled (RTS and CTS signals) + - Receive and transmit enabled + + +@par Directory contents + + - USART/Interrupt/platform_config.h Evaluation board specific configuration file + - USART/Interrupt/stm32f10x_conf.h Library Configuration file + - USART/Interrupt/stm32f10x_it.h Interrupt handlers header file + - USART/Interrupt/stm32f10x_it.c Interrupt handlers + - USART/Interrupt/main.c Main program + - USART/Interrupt/system_stm32f10x.c STM32F10x system source file + +@par Hardware and Software environment + + - This example runs on STM32F10x Connectivity line, High-Density, High-Density + Value line, Medium-Density, XL-Density, Medium-Density Value line, Low-Density + and Low-Density Value line Devices. + + - This example has been tested with STMicroelectronics STM32100E-EVAL (High-Density + Value line), STM32100B-EVAL (Medium-Density Value line), STM3210C-EVAL (Connectivity line), + STM3210E-EVAL (High-Density and XL-Density) and STM3210B-EVAL (Medium-Density) + evaluation boards and can be easily tailored to any other supported device + and development board. + To select the STMicroelectronics evaluation board used to run the example, + uncomment the corresponding line in USART/Interrupt/platform_config.h file + + - STM32100E-EVAL Set-up + - Connect a null-modem female/female RS232 cable between CN10 (USART1) and + CN5 (USART2). + @note Make sure that jumper JP5 is not open. + + - STM32100B-EVAL Set-up + - Connect a null-modem female/female RS232 cable between CN10 (USART1) and + CN9 (USART2). + @note In this case USART2 Tx and Rx pins are remapped by software on PD.05 + and PD.06 respectively. + + - STM3210C-EVAL Set-up + - Connect USART2 Tx pin (PD.05) to USART3 Rx pin (PC.11) + - Connect USART2 Rx pin (PD.06) to USART3 Tx pin (PC.10) + @note In this case USART3 Tx and Rx pins are remapped by software. + Make sure that jumpers JP19 and JP18 are open. + + - STM3210E-EVAL Set-up + - Connect a null-modem female/female RS232 cable between CN12 (USART1) and + CN8 (USART2). + + - STM3210B-EVAL Set-up + - Connect a null-modem female/female RS232 cable between CN6 (USART1) and + CN5 (USART2). + - In this case USART2 Tx and Rx pins are remapped by software on PD.05 + and PD.06 respectively. + +@par How to use it ? + +In order to make the program work, you must do the following : + - Copy all source files from this example folder to the template folder under + Project\STM32F10x_StdPeriph_Template + - Open your preferred toolchain + - Rebuild all files and load your image into target memory + - Run the example + +@note + - Low-density Value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 16 and 32 Kbytes. + - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. + - Medium-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 64 and 128 Kbytes. + - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. + - High-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - High-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 512 and 1024 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + + *

© COPYRIGHT 2011 STMicroelectronics

+ */ -- cgit v1.2.3