From afbb4cc73c44b6321cae39dbe46b97155805097d Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Sun, 13 Dec 2015 21:03:11 +0100 Subject: wip --- .../USART/MultiProcessor/main.c | 237 +++++++++++++++++++++ 1 file changed, 237 insertions(+) create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/main.c (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/main.c') diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/main.c new file mode 100644 index 0000000..7983890 --- /dev/null +++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/MultiProcessor/main.c @@ -0,0 +1,237 @@ +/** + ****************************************************************************** + * @file USART/MultiProcessor/main.c + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Main program body + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" +#include "platform_config.h" + +/** @addtogroup STM32F10x_StdPeriph_Examples + * @{ + */ + +/** @addtogroup USART_MultiProcessor + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +USART_InitTypeDef USART_InitStructure; + +/* Private function prototypes -----------------------------------------------*/ +void RCC_Configuration(void); +void GPIO_Configuration(void); +void Delay(__IO uint32_t nCount); + +/* Private functions ---------------------------------------------------------*/ +/** + * @brief Main program + * @param None + * @retval None + */ +int main(void) +{ + /*!< At this stage the microcontroller clock setting is already configured, + this is done through SystemInit() function which is called from startup + file (startup_stm32f10x_xx.s) before to branch to application main. + To reconfigure the default setting of SystemInit() function, refer to + system_stm32f10x.c file + */ + + /* System Clocks Configuration */ + RCC_Configuration(); + + /* Configure the GPIO ports */ + GPIO_Configuration(); + + /* Initialize Leds, Wakeup and Key Buttons mounted on STM3210X-EVAL board */ + STM_EVAL_LEDInit(LED1); + STM_EVAL_LEDInit(LED2); + STM_EVAL_LEDInit(LED3); + STM_EVAL_LEDInit(LED4); + STM_EVAL_PBInit(BUTTON_WAKEUP, BUTTON_MODE_EXTI); + STM_EVAL_PBInit(BUTTON_KEY, BUTTON_MODE_EXTI); + +/* USARTy and USARTz configuration -------------------------------------------*/ + /* USARTy and USARTz configured as follow: + - BaudRate = 9600 baud + - Word Length = 9 Bits + - One Stop Bit + - No parity + - Hardware flow control disabled (RTS and CTS signals) + - Receive and transmit enabled + */ + USART_InitStructure.USART_BaudRate = 9600; + USART_InitStructure.USART_WordLength = USART_WordLength_9b; + USART_InitStructure.USART_StopBits = USART_StopBits_1; + USART_InitStructure.USART_Parity = USART_Parity_No; + USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; + USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + + /* Configure USARTy */ + USART_Init(USARTy, &USART_InitStructure); + /* Configure USARTz */ + USART_Init(USARTz, &USART_InitStructure); + + /* Enable the USARTy */ + USART_Cmd(USARTy, ENABLE); + /* Enable the USARTz */ + USART_Cmd(USARTz, ENABLE); + + /* Set the USARTy Address */ + USART_SetAddress(USARTy, 0x1); + /* Set the USARTz Address */ + USART_SetAddress(USARTz, 0x2); + + /* Select the USARTz WakeUp Method */ + USART_WakeUpConfig(USARTz, USART_WakeUp_AddressMark); + + while (1) + { + /* Send one byte from USARTy to USARTz */ + USART_SendData(USARTy, 0x33); + + /* Wait while USART1 TXE = 0 */ + while(USART_GetFlagStatus(USARTz, USART_FLAG_TXE) == RESET) + { + } + + if(USART_GetFlagStatus(USARTz, USART_FLAG_RXNE) != RESET) + { + if(USART_ReceiveData(USARTz) == 0x33) + { + STM_EVAL_LEDToggle(LED1); + Delay(0x5FFFF); + STM_EVAL_LEDToggle(LED2); + Delay(0x5FFFF); + STM_EVAL_LEDToggle(LED3); + Delay(0x5FFFF); + STM_EVAL_LEDToggle(LED4); + Delay(0x5FFFF); + } + } + } +} + +/** + * @brief Configures the different system clocks. + * @param None + * @retval None + */ +void RCC_Configuration(void) +{ + /* Enable GPIO clock */ + RCC_APB2PeriphClockCmd(USARTy_GPIO_CLK | USARTz_GPIO_CLK | RCC_APB2Periph_AFIO, ENABLE); + +#ifndef USE_STM3210C_EVAL + /* Enable USARTy Clock */ + RCC_APB2PeriphClockCmd(USARTy_CLK, ENABLE); +#else + /* Enable USARTy Clock */ + RCC_APB1PeriphClockCmd(USARTy_CLK, ENABLE); +#endif + /* Enable USARTz Clock */ + RCC_APB1PeriphClockCmd(USARTz_CLK, ENABLE); +} + +/** + * @brief Configures the different GPIO ports. + * @param None + * @retval None + */ +void GPIO_Configuration(void) +{ + GPIO_InitTypeDef GPIO_InitStructure; + +#ifdef USE_STM3210C_EVAL + /* Enable the USART3 Pins Software Remapping */ + GPIO_PinRemapConfig(GPIO_PartialRemap_USART3, ENABLE); + + /* Enable the USART2 Pins Software Remapping */ + GPIO_PinRemapConfig(GPIO_Remap_USART2, ENABLE); +#elif defined(USE_STM3210B_EVAL) || defined(USE_STM32100B_EVAL) + /* Enable the USART2 Pins Software Remapping */ + GPIO_PinRemapConfig(GPIO_Remap_USART2, ENABLE); +#endif + + /* Configure USARTy Rx as input floating */ + GPIO_InitStructure.GPIO_Pin = USARTy_RxPin; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_Init(USARTy_GPIO, &GPIO_InitStructure); + + /* Configure USARTz Rx as input floating */ + GPIO_InitStructure.GPIO_Pin = USARTz_RxPin; + GPIO_Init(USARTz_GPIO, &GPIO_InitStructure); + + /* Configure USARTy Tx as alternate function push-pull */ + GPIO_InitStructure.GPIO_Pin = USARTy_TxPin; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_Init(USARTy_GPIO, &GPIO_InitStructure); + + /* Configure USARTz Tx as alternate function push-pull */ + GPIO_InitStructure.GPIO_Pin = USARTz_TxPin; + GPIO_Init(USARTz_GPIO, &GPIO_InitStructure); +} + +/** + * @brief Inserts a delay time. + * @param nCount: specifies the delay time length. + * @retval None + */ +void Delay(__IO uint32_t nCount) +{ + /* Decrement nCount value */ + for(; nCount != 0; nCount--); +} + +#ifdef USE_FULL_ASSERT + +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t* file, uint32_t line) +{ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + + /* Infinite loop */ + while (1) + { + } +} + +#endif + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3