From afbb4cc73c44b6321cae39dbe46b97155805097d Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Sun, 13 Dec 2015 21:03:11 +0100 Subject: wip --- .../USART/Smartcard/main.c | 408 +++++++++++++++++++++ 1 file changed, 408 insertions(+) create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/main.c (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/main.c') diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/main.c b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/main.c new file mode 100644 index 0000000..dc1832a --- /dev/null +++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/main.c @@ -0,0 +1,408 @@ +/** + ****************************************************************************** + * @file USART/Smartcard/main.c + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Main program body + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f10x.h" +#include "platform_config.h" + +/* Private define ------------------------------------------------------------*/ +#define T0_PROTOCOL 0x00 /* T0 PROTOCOL */ +#define SETUP_LENGHT 20 +#define HIST_LENGHT 20 +#define SC_Receive_Timeout 0x4000 /* direction to reader */ + +/** @addtogroup STM32F10x_StdPeriph_Examples + * @{ + */ + +/** @addtogroup USART_Smartcard + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* ATR STRUCTURE - ANSWER TO RESET */ +typedef struct +{ + uint8_t TS; /* Bit Convention */ + uint8_t T0; /* High Nibble = N. of setup byte; low nibble = N. of historical byte */ + uint8_t T[SETUP_LENGHT]; /* Setup array */ + uint8_t H[HIST_LENGHT]; /* Historical array */ + uint8_t Tlenght; /* Setup array dimension */ + uint8_t Hlenght; /* Historical array dimension */ +} SC_ATR; + +typedef enum {FAILED = 0, PASSED = !FAILED} TestStatus; + +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +USART_InitTypeDef USART_InitStructure; +USART_ClockInitTypeDef USART_ClockInitStructure; +SC_ATR SC_A2R; +__IO uint32_t index = 0, Counter = 0; +volatile TestStatus ATRDecodeStatus = FAILED; +__IO uint32_t CardInserted = 0, CardProtocol = 1; + +__IO uint8_t DST_Buffer[50]= { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +void RCC_Configuration(void); +void GPIO_Configuration(void); +void EXTI_Configuration(void); +void NVIC_Configuration(void); +uint8_t SC_decode_Answer2reset(__IO uint8_t *card); + +/** + * @brief Main program + * @param None + * @retval None + */ +int main(void) +{ + /*!< At this stage the microcontroller clock setting is already configured, + this is done through SystemInit() function which is called from startup + file (startup_stm32f10x_xx.s) before to branch to application main. + To reconfigure the default setting of SystemInit() function, refer to + system_stm32f10x.c file + */ + + /* System Clocks Configuration */ + RCC_Configuration(); + + /* NVIC configuration */ + NVIC_Configuration(); + + /* Configure the GPIO ports */ + GPIO_Configuration(); + + /* Configure the EXTI Controller */ + EXTI_Configuration(); + + +/* SC_USART configuration ----------------------------------------------------*/ + /* SC_USART configured as follow: + - Word Length = 9 Bits + - 0.5 Stop Bit + - Even parity + - BaudRate = 12096 baud + - Hardware flow control disabled (RTS and CTS signals) + - Tx and Rx enabled + - USART Clock enabled + - USART CPOL Low + - USART CPHA on first edge + - USART Last Bit Clock Enabled + */ + + /* SC_USART Clock set to 4.5MHz (PCLK1 = 36 MHZ / 8) */ + USART_SetPrescaler(SC_USART, 0x04); + /* SC_USART Guard Time set to 2 Bit */ + USART_SetGuardTime(SC_USART, 0x2); + + USART_ClockInitStructure.USART_Clock = USART_Clock_Enable; + USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low; + USART_ClockInitStructure.USART_CPHA = USART_CPHA_1Edge; + USART_ClockInitStructure.USART_LastBit = USART_LastBit_Enable; + USART_ClockInit(SC_USART, &USART_ClockInitStructure); + + USART_InitStructure.USART_BaudRate = 12096; + USART_InitStructure.USART_WordLength = USART_WordLength_9b; + USART_InitStructure.USART_StopBits = USART_StopBits_1_5; + USART_InitStructure.USART_Parity = USART_Parity_Even; + USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; + USART_Init(SC_USART, &USART_InitStructure); + + /* Enable the SC_USART Parity Error Interrupt */ + USART_ITConfig(SC_USART, USART_IT_PE, ENABLE); + + /* Enable SC_USART */ + USART_Cmd(SC_USART, ENABLE); + + /* Enable the NACK Transmission */ + USART_SmartCardNACKCmd(SC_USART, ENABLE); + + /* Enable the Smartcard Interface */ + USART_SmartCardCmd(SC_USART, ENABLE); + + /* Loop while no Smartcard is detected */ + while(CardInserted == 0) + { + } + + /* Read Smartcard ATR response */ + for(index = 0; index < 40; index++, Counter = 0) + { + while((USART_GetFlagStatus(SC_USART, USART_FLAG_RXNE) == RESET) && (Counter != SC_Receive_Timeout)) + { + Counter++; + } + + if(Counter != SC_Receive_Timeout) + { + DST_Buffer[index] = USART_ReceiveData(SC_USART); + } + } + + /* Decode ATR */ + CardProtocol = SC_decode_Answer2reset(DST_Buffer); + + /* Test if the inserted card is ISO7816-3 T=0 compatible */ + if(CardProtocol == 0) + { + /* Inserted card is ISO7816-3 T=0 compatible */ + ATRDecodeStatus = PASSED; + } + else + { + /* Inserted Smartcard is not ISO7816-3 T=0 compatible */ + ATRDecodeStatus = FAILED; + } + + while (1) + { + } +} + +/** + * @brief Configures the different system clocks. + * @param None + * @retval None + */ +void RCC_Configuration(void) +{ + /* Enable GPIO_3_5V, SC_USART_GPIO_CLK, GPIO_CMDVCC, GPIO_RESET, GPIO_OFF and + AFIO clocks */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_3_5V | SC_USART_GPIO_CLK | RCC_APB2Periph_RESET | + RCC_APB2Periph_CMDVCC | RCC_APB2Periph_OFF | RCC_APB2Periph_AFIO, ENABLE); + + /* Enable SC_USART clocks */ + RCC_APB1PeriphClockCmd(SC_USART_CLK, ENABLE); +} + +/** + * @brief Configures the different GPIO ports. + * @param None + * @retval None + */ +void GPIO_Configuration(void) +{ + GPIO_InitTypeDef GPIO_InitStructure; + +#ifdef USE_STM3210C_EVAL + /* Enable the USART3 Pins Software Full Remapping */ + GPIO_PinRemapConfig(GPIO_FullRemap_USART3, ENABLE); +#endif + /* Configure SC_USART CK as alternate function push-pull */ + GPIO_InitStructure.GPIO_Pin = SC_USART_ClkPin; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_Init(SC_USART_GPIO, &GPIO_InitStructure); + + /* Configure SC_USART Tx as alternate function open-drain */ + GPIO_InitStructure.GPIO_Pin = SC_USART_TxPin; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_OD; + GPIO_Init(SC_USART_GPIO, &GPIO_InitStructure); + + /* Configure Smartcard Reset */ + GPIO_InitStructure.GPIO_Pin = SC_RESET; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; + GPIO_Init(GPIO_RESET, &GPIO_InitStructure); + + /* Set RSTIN HIGH */ + GPIO_SetBits(GPIO_RESET, SC_RESET); + + /* Configure Smartcard 3/5V */ + GPIO_InitStructure.GPIO_Pin = SC_3_5V; + GPIO_Init(GPIO_3_5V, &GPIO_InitStructure); + + /* Select 5 V */ + GPIO_SetBits(GPIO_3_5V, SC_3_5V); + + /* Configure Smartcard CMDVCC */ + GPIO_InitStructure.GPIO_Pin = SC_CMDVCC; + GPIO_Init(GPIO_CMDVCC, &GPIO_InitStructure); + + /* Select Smartcard CMDVCC */ + GPIO_SetBits(GPIO_CMDVCC, SC_CMDVCC); + + /* Select Smartcard OFF */ + GPIO_InitStructure.GPIO_Pin = SC_OFF; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_Init(GPIO_OFF, &GPIO_InitStructure); +} + +/** + * @brief Configures the External Interrupts controller. + * @param None + * @retval None + */ +void EXTI_Configuration(void) +{ + EXTI_InitTypeDef EXTI_InitStructure; + + /* Smartcard OFF */ + GPIO_EXTILineConfig(SC_PortSource, SC_PinSource); + + EXTI_StructInit(&EXTI_InitStructure); + EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; + EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; + EXTI_InitStructure.EXTI_Line = SC_EXTI; + EXTI_InitStructure.EXTI_LineCmd = ENABLE; + EXTI_Init(&EXTI_InitStructure); + + /* Clear SC EXTI Line Pending Bit */ + EXTI_ClearITPendingBit(SC_EXTI); +} + +/** + * @brief Configures the nested vectored interrupt controller. + * @param None + * @retval None + */ +void NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + + /* Configure the NVIC Preemption Priority Bits */ + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1); + /* Clear the SC_EXTI IRQ Pending Bit */ + NVIC_ClearPendingIRQ(SC_EXTI_IRQ); + + NVIC_InitStructure.NVIC_IRQChannel = SC_EXTI_IRQ; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); + + NVIC_InitStructure.NVIC_IRQChannel = SC_USART_IRQn; + NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +} + +/** + * @brief Decode the Card ATR Response. + * @param card: pointer to the buffer containing the Card ATR. + * @retval Card protocol + */ +uint8_t SC_decode_Answer2reset(__IO uint8_t *card) +{ + uint32_t i = 0, flag = 0, buf = 0, protocol = 0; + + SC_A2R.TS = 0; + SC_A2R.T0 = 0; + for (i = 0; i < SETUP_LENGHT; i++) + { + SC_A2R.T[i] = 0; + } + for (i = 0;i < HIST_LENGHT; i++) + { + SC_A2R.H[i] = 0; + } + SC_A2R.Tlenght = 0; + SC_A2R.Hlenght = 0; + + SC_A2R.TS = card[0]; /* INITIAL CHARACTER */ + SC_A2R.T0 = card[1]; /* FORMAT CHARACTER */ + + SC_A2R.Hlenght = SC_A2R.T0 & 0x0F; + + if((SC_A2R.T0 & 0x80) == 0x80) flag = 1; + + for(i = 0; i < 4; i++) + { + SC_A2R.Tlenght = SC_A2R.Tlenght + (((SC_A2R.T0 & 0xF0) >> (4 + i)) & 0x1); + } + + for(i = 0; i < SC_A2R.Tlenght; i++) + { + SC_A2R.T[i] = card[i + 2]; + } + + protocol = SC_A2R.T[SC_A2R.Tlenght - 1] & 0x0F; + + while(flag) + { + if ((SC_A2R.T[SC_A2R.Tlenght-1] & 0x80)== 0x80) + { + flag = 1; + } + else + { + flag = 0; + } + buf = SC_A2R.Tlenght; + SC_A2R.Tlenght = 0; + + for(i = 0; i < 4; i++) + { + SC_A2R.Tlenght = SC_A2R.Tlenght + (((SC_A2R.T[buf - 1] & 0xF0) >> (4 + i)) & 0x1); + } + for(i = 0; i < SC_A2R.Tlenght; i++) + { + SC_A2R.T[buf + i] = card[i + 2 + buf]; + } + SC_A2R.Tlenght += buf; + } + + for(i = 0;i < SC_A2R.Hlenght; i++) + { + SC_A2R.H[i] = card[i + 2 + SC_A2R.Tlenght]; + } + + return ((uint8_t)protocol); +} + +#ifdef USE_FULL_ASSERT + +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t* file, uint32_t line) +{ + /* User can add his own implementation to report the file name and line number, + ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + + /* Infinite loop */ + while (1) + { + } +} + +#endif + +/** + * @} + */ + +/** + * @} + */ + +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/ -- cgit v1.2.3