From afbb4cc73c44b6321cae39dbe46b97155805097d Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Sun, 13 Dec 2015 21:03:11 +0100 Subject: wip --- .../USART/Smartcard/readme.txt | 116 +++++++++++++++++++++ 1 file changed, 116 insertions(+) create mode 100644 tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/readme.txt (limited to 'tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/readme.txt') diff --git a/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/readme.txt b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/readme.txt new file mode 100644 index 0000000..e5551b5 --- /dev/null +++ b/tmp/STM32F10x_StdPeriph_Lib_V3.5.0/Project/STM32F10x_StdPeriph_Examples/USART/Smartcard/readme.txt @@ -0,0 +1,116 @@ +/** + @page USART_Smartcard USART Smartcard example + + @verbatim + ******************** (C) COPYRIGHT 2011 STMicroelectronics ******************* + * @file USART/Smartcard/readme.txt + * @author MCD Application Team + * @version V3.5.0 + * @date 08-April-2011 + * @brief Description of the USART Smartcard example. + ****************************************************************************** + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + ****************************************************************************** + @endverbatim + +@par Example Description + +This example provides a description of how to use the USART in Smartcard mode. +The example gives only the possibility to read the ATR and decode it into +predefined buffer. +First, the code is waiting for an card insertion. If a card is detected through +the EXTI Line interrupt (connected to the Smartcard detect pin), a reset signal +is applied to the card through its reset pin. +As response to this reset, the card transmit the ATR which will be stored in +predefined buffer. Once the ATR is received, it is decoded and stored in a specific +structure (SC_A2R) and the card protocol type is stored in a variable. +ATRDecodeStatus variable must be equal to 1 (PASSED) when the sequence succeed. + +The used Smartcard should be ISO7816-3 T=0 compatible. + +SC_USART configured as follow: + - Word Length = 9 Bits + - 0.5 Stop Bit + - Even parity + - BaudRate = 12096 baud + - Hardware flow control disabled (RTS and CTS signals) + - Tx and Rx enabled + - USART Clock enabled + - USART CPOL: Clock is active low + - USART CPHA: Data is captured on the second edge + - USART LastBit: The clock pulse of the last data bit is not output to + the SCLK pin + + +@par Directory contents + + - USART/Smartcard/platform_config.h Evaluation board specific configuration file + - USART/Smartcard/stm32f10x_conf.h Library Configuration file + - USART/Smartcard/stm32f10x_it.h Interrupt handlers header file + - USART/Smartcard/stm32f10x_it.c Interrupt handlers + - USART/Smartcard/main.c Main program + - USART/Smartcard/system_stm32f10x.c STM32F10x system source file + +@par Hardware and Software environment + + - This example runs on STM32F10x Connectivity line, High-Density, High-Density + Value line, Medium-Density, XL-Density, Medium-Density Value line, Low-Density + and Low-Density Value line Devices. + + - This example has been tested with STMicroelectronics STM3210C-EVAL (Connectivity line), + STM3210E-EVAL (High-Density and XL-Density) and STM3210B-EVAL (Medium-Density) + evaluation boards and can be easily tailored to any other supported device and + development board. + To select the STMicroelectronics evaluation board used to run the example, + uncomment the corresponding line in USART/Smartcard/platform_config.h file + + - STM3210C-EVAL Set-up + - Plug a Smartcard (ISO7816-3 T=0 compatible) into the dedicated Smartcard + connector CN5. + @note In this case USART3 Tx and CK pins are full remapped by software. + Make sure that Jumper 11 (JP11), Jumper 12 (JP12) and Jumper 13 (JP13) + are in position 1<-->2. + + - STM3210E-EVAL Set-up + - Plug a Smartcard (ISO7816-3 T=0 compatible) into the dedicated Smartcard + connector CN18. + @note Make sure that Jumper 15 (JP15) and Jumper 16 (JP16) are fitted. + + - STM3210B-EVAL Set-up + - Plug a Smartcard (ISO7816-3 T=0 compatible) into the dedicated Smartcard + connector CN16. + + +@par How to use it ? + +In order to make the program work, you must do the following : + - Copy all source files from this example folder to the template folder under + Project\STM32F10x_StdPeriph_Template + - Open your preferred toolchain + - Rebuild all files and load your image into target memory + - Run the example + +@note + - Low-density Value line devices are STM32F100xx microcontrollers where the + Flash memory density ranges between 16 and 32 Kbytes. + - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes. + - Medium-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 64 and 128 Kbytes. + - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx + microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes. + - High-density Value line devices are STM32F100xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - High-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 512 and 1024 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + + *

© COPYRIGHT 2011 STMicroelectronics

+ */ -- cgit v1.2.3