/**
@page FSMC_NOR_CodeExecute_binary FSMC NOR CodeExecute example binary directory
@verbatim
******************** (C) COPYRIGHT 2011 STMicroelectronics *******************
* @file FSMC/NOR_CodeExecute/binary/readme.txt
* @author MCD Application Team
* @version V3.5.0
* @date 08-April-2011
* @brief Description of the FSMC NOR CodeExecute example binary directory.
******************************************************************************
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
******************************************************************************
@endverbatim
@par Example Description
This directory contains a set of sources files that build the application to be
loaded into the NOR memory mounted on STM3210E-EVAL board.
The GPIO IOToggle example provided within the STM32F10x Firmware library is used
as illustration. In this example four LEDs: LED1, LED2, LED3 and LED4 are
toggled in an infinite loop.
@par Directory contents
- FSMC/NOR_CodeExecute/binary/stm32f10x_conf.h Library Configuration file
- FSMC/NOR_CodeExecute/binary/stm32f10x_it.c Interrupt handlers
- FSMC/NOR_CodeExecute/binary/stm32f10x_it.h Header for stm32f10x_it.c
- FSMC/NOR_CodeExecute/binary/main.c Main program
- FSMC/NOR_CodeExecute/binary/FLASH_NOR.ini NOR Initialization File for MDK-ARM toolchain.
- FSMC/NOR_CodeExecute/binary/STM3210E-EVAL_NOR.FLM STM3210E-EVAL board NOR flasher for MDK-ARM toolchain.
- FSMC/NOR_CodeExecute/binary/system_stm32f10x.c STM32F10x system source file
@par Hardware and Software environment
- This example runs only on STM32F10x High-Density and XL-Density Devices.
- This example has been tested with STMicroelectronics STM3210E-EVAL (High-Density
and XL-Density) evaluation board.
To select the STMicroelectronics evaluation board used to run the example,
uncomment the corresponding line in stm32_eval.h file (under Utilities\STM32_EVAL)
@par How to use it ?
In order to make the program work, you must do the following:
- Create a project and setup all project configuration:
- MDK-ARM
- copy "STM3210E-EVAL_NOR.FLM" file under "C:\Keil\ARM\Flash" directory
- in Project->Options->Target window, select 'ROM1', enter 0x64000000 as
start address with size of 0x1000000 and check "Startup" option
(IROM1 must be un-checked)
- in Project->Options->Linker window, uncheck "Use memory Layout from
Target Dialog" then enter 0x64000000 as R/O base address and chek
again "Use memory Layout from Target Dialog"
- in Project->Options->Utilities window, select "Use Target Driver for
Flash Programming"
- Click on 'Settings' button then select "STM3210E_EVAL NOR Flash" as
Programming Algorithms (start:0x64000000, size:0x1000000)
- in Project->Options->Debug select "FLASH_NOR.ini" provided within this
example directory as initialization file.
- EWARM
- use "stm32f10x_nor.icf" as linker file
- in project->options ->debugger-> setup , the "run to main" option
should be un-checked
- in project->options ->J-Link/J-Trace-> setup , set the "Reset" to
"Normal"
- in project->options ->debugger->download, click on "edit" button
("Use flash loader(s)" option should be checked)
- select the default flash loader then click on "edit" button
- check "override default flash loader path" option and select
"FlashSTM32F10x_NOR.xml" as flash loader
($TOOLKIT_DIR$\config\flashloader\ST\FlashSTM32F10x_NOR.xml)
- Copy all source files from this example folder to the template folder under
Project\STM32F10x_StdPeriph_Template
- Open your preferred toolchain
- Rebuild all files and load your image into target memory
- Run the example
- Link all compiled files and load your image into NOR memory
@note
- Low-density Value line devices are STM32F100xx microcontrollers where the
Flash memory density ranges between 16 and 32 Kbytes.
- Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx
microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
- Medium-density Value line devices are STM32F100xx microcontrollers where
the Flash memory density ranges between 64 and 128 Kbytes.
- Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx
microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
- High-density Value line devices are STM32F100xx microcontrollers where
the Flash memory density ranges between 256 and 512 Kbytes.
- High-density devices are STM32F101xx and STM32F103xx microcontrollers where
the Flash memory density ranges between 256 and 512 Kbytes.
- XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
the Flash memory density ranges between 512 and 1024 Kbytes.
- Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
* © COPYRIGHT 2011 STMicroelectronics
*/