/**
******************************************************************************
* @file PWR/STANDBY/main.c
* @author MCD Application Team
* @version V3.5.0
* @date 08-April-2011
* @brief Main program body.
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
*
© COPYRIGHT 2011 STMicroelectronics
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
#include "stm32_eval.h"
/** @addtogroup STM32F10x_StdPeriph_Examples
* @{
*/
/** @addtogroup PWR_STANDBY
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
void RTC_Configuration(void);
void SysTick_Configuration(void);
/* Private functions ---------------------------------------------------------*/
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
file (startup_stm32f10x_xx.s) before to branch to application main.
To reconfigure the default setting of SystemInit() function, refer to
system_stm32f10x.c file
*/
/* Initialize LEDs and Key Button mounted on STM3210X-EVAL board */
STM_EVAL_LEDInit(LED1);
STM_EVAL_LEDInit(LED2);
STM_EVAL_PBInit(BUTTON_KEY, BUTTON_MODE_EXTI);
/* Turn on LED1 */
STM_EVAL_LEDOn(LED1);
/* Enable PWR and BKP clock */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);
/* Enable WKUP pin */
PWR_WakeUpPinCmd(ENABLE);
/* Allow access to BKP Domain */
PWR_BackupAccessCmd(ENABLE);
/* Configure RTC clock source and prescaler */
RTC_Configuration();
/* Configure the SysTick to generate an interrupt each 250 ms */
SysTick_Configuration();
while (1)
{
}
}
/**
* @brief Configures RTC clock source and prescaler.
* @param None
* @retval None
*/
void RTC_Configuration(void)
{
/* Check if the StandBy flag is set */
if(PWR_GetFlagStatus(PWR_FLAG_SB) != RESET)
{/* System resumed from STANDBY mode */
/* Turn on LED2 */
STM_EVAL_LEDOn(LED2);
/* Clear StandBy flag */
PWR_ClearFlag(PWR_FLAG_SB);
/* Wait for RTC APB registers synchronisation */
RTC_WaitForSynchro();
/* No need to configure the RTC as the RTC configuration(clock source, enable,
prescaler,...) is kept after wake-up from STANDBY */
}
else
{/* StandBy flag is not set */
/* RTC clock source configuration ----------------------------------------*/
/* Reset Backup Domain */
BKP_DeInit();
/* Enable LSE OSC */
RCC_LSEConfig(RCC_LSE_ON);
/* Wait till LSE is ready */
while(RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET)
{
}
/* Select the RTC Clock Source */
RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
/* Enable the RTC Clock */
RCC_RTCCLKCmd(ENABLE);
/* RTC configuration -----------------------------------------------------*/
/* Wait for RTC APB registers synchronisation */
RTC_WaitForSynchro();
/* Set the RTC time base to 1s */
RTC_SetPrescaler(32767);
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
}
}
/**
* @brief Configures the SysTick to generate an interrupt each 250 ms.
* @param None
* @retval None
*/
void SysTick_Configuration(void)
{
/* SysTick interrupt each 250 ms with SysTick Clock equal to (HCLK/8) */
if (SysTick_Config((SystemCoreClock/8) / 4))
{
/* Capture error */
while (1);
}
/* Select AHB clock(HCLK) divided by 8 as SysTick clock source */
SysTick_CLKSourceConfig(SysTick_CLKSource_HCLK_Div8);
/* Set SysTick Preemption Priority to 1 */
NVIC_SetPriority(SysTick_IRQn, 0x04);
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t* file, uint32_t line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* Infinite loop */
while (1)
{
}
}
#endif
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/