/**
******************************************************************************
* @file RTC/Calendar/main.c
* @author MCD Application Team
* @version V3.5.0
* @date 08-April-2011
* @brief Main program body
******************************************************************************
* @attention
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
*
© COPYRIGHT 2011 STMicroelectronics
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
#include "stm32_eval.h"
#include
/** @addtogroup STM32F10x_StdPeriph_Examples
* @{
*/
/** @addtogroup RTC_Calendar
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define RTCClockOutput_Enable /* RTC Clock/64 is output on tamper pin(PC.13) */
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
__IO uint32_t TimeDisplay = 0;
USART_InitTypeDef USART_InitStructure;
/* Private function prototypes -----------------------------------------------*/
void RTC_Configuration(void);
void NVIC_Configuration(void);
uint32_t Time_Regulate(void);
void Time_Adjust(void);
void Time_Show(void);
void Time_Display(uint32_t TimeVar);
uint8_t USART_Scanf(uint32_t value);
#ifdef __GNUC__
/* With GCC/RAISONANCE, small printf (option LD Linker->Libraries->Small printf
set to 'Yes') calls __io_putchar() */
#define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
#else
#define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
#endif /* __GNUC__ */
/* Private functions ---------------------------------------------------------*/
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/*!< At this stage the microcontroller clock setting is already configured,
this is done through SystemInit() function which is called from startup
file (startup_stm32f10x_xx.s) before to branch to application main.
To reconfigure the default setting of SystemInit() function, refer to
system_stm32f10x.c file
*/
/* Initialize LED1 mounted on STM3210X-EVAL board */
STM_EVAL_LEDInit(LED1);
/* USARTx configured as follow:
- BaudRate = 115200 baud
- Word Length = 8 Bits
- One Stop Bit
- No parity
- Hardware flow control disabled (RTS and CTS signals)
- Receive and transmit enabled
*/
USART_InitStructure.USART_BaudRate = 115200;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
STM_EVAL_COMInit(COM1, &USART_InitStructure);
/* NVIC configuration */
NVIC_Configuration();
if (BKP_ReadBackupRegister(BKP_DR1) != 0xA5A5)
{
/* Backup data register value is not correct or not yet programmed (when
the first time the program is executed) */
printf("\r\n\n RTC not yet configured....");
/* RTC Configuration */
RTC_Configuration();
printf("\r\n RTC configured....");
/* Adjust time by values entered by the user on the hyperterminal */
Time_Adjust();
BKP_WriteBackupRegister(BKP_DR1, 0xA5A5);
}
else
{
/* Check if the Power On Reset flag is set */
if (RCC_GetFlagStatus(RCC_FLAG_PORRST) != RESET)
{
printf("\r\n\n Power On Reset occurred....");
}
/* Check if the Pin Reset flag is set */
else if (RCC_GetFlagStatus(RCC_FLAG_PINRST) != RESET)
{
printf("\r\n\n External Reset occurred....");
}
printf("\r\n No need to configure RTC....");
/* Wait for RTC registers synchronization */
RTC_WaitForSynchro();
/* Enable the RTC Second */
RTC_ITConfig(RTC_IT_SEC, ENABLE);
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
}
#ifdef RTCClockOutput_Enable
/* Enable PWR and BKP clocks */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);
/* Allow access to BKP Domain */
PWR_BackupAccessCmd(ENABLE);
/* Disable the Tamper Pin */
BKP_TamperPinCmd(DISABLE); /* To output RTCCLK/64 on Tamper pin, the tamper
functionality must be disabled */
/* Enable RTC Clock Output on Tamper Pin */
BKP_RTCOutputConfig(BKP_RTCOutputSource_CalibClock);
#endif
/* Clear reset flags */
RCC_ClearFlag();
/* Display time in infinite loop */
Time_Show();
}
/**
* @brief Configures the nested vectored interrupt controller.
* @param None
* @retval None
*/
void NVIC_Configuration(void)
{
NVIC_InitTypeDef NVIC_InitStructure;
/* Configure one bit for preemption priority */
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
/* Enable the RTC Interrupt */
NVIC_InitStructure.NVIC_IRQChannel = RTC_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
}
/**
* @brief Configures the RTC.
* @param None
* @retval None
*/
void RTC_Configuration(void)
{
/* Enable PWR and BKP clocks */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);
/* Allow access to BKP Domain */
PWR_BackupAccessCmd(ENABLE);
/* Reset Backup Domain */
BKP_DeInit();
/* Enable LSE */
RCC_LSEConfig(RCC_LSE_ON);
/* Wait till LSE is ready */
while (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET)
{}
/* Select LSE as RTC Clock Source */
RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);
/* Enable RTC Clock */
RCC_RTCCLKCmd(ENABLE);
/* Wait for RTC registers synchronization */
RTC_WaitForSynchro();
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
/* Enable the RTC Second */
RTC_ITConfig(RTC_IT_SEC, ENABLE);
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
/* Set RTC prescaler: set RTC period to 1sec */
RTC_SetPrescaler(32767); /* RTC period = RTCCLK/RTC_PR = (32.768 KHz)/(32767+1) */
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
}
/**
* @brief Returns the time entered by user, using Hyperterminal.
* @param None
* @retval Current time RTC counter value
*/
uint32_t Time_Regulate(void)
{
uint32_t Tmp_HH = 0xFF, Tmp_MM = 0xFF, Tmp_SS = 0xFF;
printf("\r\n==============Time Settings=====================================");
printf("\r\n Please Set Hours");
while (Tmp_HH == 0xFF)
{
Tmp_HH = USART_Scanf(23);
}
printf(": %d", Tmp_HH);
printf("\r\n Please Set Minutes");
while (Tmp_MM == 0xFF)
{
Tmp_MM = USART_Scanf(59);
}
printf(": %d", Tmp_MM);
printf("\r\n Please Set Seconds");
while (Tmp_SS == 0xFF)
{
Tmp_SS = USART_Scanf(59);
}
printf(": %d", Tmp_SS);
/* Return the value to store in RTC counter register */
return((Tmp_HH*3600 + Tmp_MM*60 + Tmp_SS));
}
/**
* @brief Adjusts time.
* @param None
* @retval None
*/
void Time_Adjust(void)
{
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
/* Change the current time */
RTC_SetCounter(Time_Regulate());
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
}
/**
* @brief Displays the current time.
* @param TimeVar: RTC counter value.
* @retval None
*/
void Time_Display(uint32_t TimeVar)
{
uint32_t THH = 0, TMM = 0, TSS = 0;
/* Reset RTC Counter when Time is 23:59:59 */
if (RTC_GetCounter() == 0x0001517F)
{
RTC_SetCounter(0x0);
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
}
/* Compute hours */
THH = TimeVar / 3600;
/* Compute minutes */
TMM = (TimeVar % 3600) / 60;
/* Compute seconds */
TSS = (TimeVar % 3600) % 60;
printf("Time: %0.2d:%0.2d:%0.2d\r", THH, TMM, TSS);
}
/**
* @brief Shows the current time (HH:MM:SS) on the Hyperterminal.
* @param None
* @retval None
*/
void Time_Show(void)
{
printf("\n\r");
/* Infinite loop */
while (1)
{
/* If 1s has been elapsed */
if (TimeDisplay == 1)
{
/* Display current time */
Time_Display(RTC_GetCounter());
TimeDisplay = 0;
}
}
}
/**
* @brief Retargets the C library printf function to the USART.
* @param None
* @retval None
*/
PUTCHAR_PROTOTYPE
{
/* Place your implementation of fputc here */
/* e.g. write a character to the USART */
USART_SendData(EVAL_COM1, (uint8_t) ch);
/* Loop until the end of transmission */
while (USART_GetFlagStatus(EVAL_COM1, USART_FLAG_TC) == RESET)
{}
return ch;
}
/**
* @brief Gets numeric values from the hyperterminal.
* @param None
* @retval None
*/
uint8_t USART_Scanf(uint32_t value)
{
uint32_t index = 0;
uint32_t tmp[2] = {0, 0};
while (index < 2)
{
/* Loop until RXNE = 1 */
while (USART_GetFlagStatus(EVAL_COM1, USART_FLAG_RXNE) == RESET)
{}
tmp[index++] = (USART_ReceiveData(EVAL_COM1));
if ((tmp[index - 1] < 0x30) || (tmp[index - 1] > 0x39))
{
printf("\n\rPlease enter valid number between 0 and 9");
index--;
}
}
/* Calculate the Corresponding value */
index = (tmp[1] - 0x30) + ((tmp[0] - 0x30) * 10);
/* Checks */
if (index > value)
{
printf("\n\rPlease enter valid number between 0 and %d", value);
return 0xFF;
}
return index;
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t* file, uint32_t line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* Infinite loop */
while (1)
{}
}
#endif
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/