diff options
Diffstat (limited to 'stm32cubemx/Drivers')
55 files changed, 0 insertions, 69694 deletions
diff --git a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103x6.h b/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103x6.h deleted file mode 100644 index 405f697..0000000 --- a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103x6.h +++ /dev/null @@ -1,10944 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f103x6.h - * @author MCD Application Team - * @version V4.1.0 - * @date 29-April-2016 - * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. - * This file contains all the peripheral register's definitions, bits - * definitions and memory mapping for STM32F1xx devices. - * - * This file contains: - * - Data structures and the address mapping for all peripherals - * - Peripheral's registers declarations and bits definition - * - Macros to access peripheral’s registers hardware - * - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f103x6 - * @{ - */ - -#ifndef __STM32F103x6_H -#define __STM32F103x6_H - -#ifdef __cplusplus - extern "C" { -#endif - -/** @addtogroup Configuration_section_for_CMSIS - * @{ - */ -/** - * @brief Configuration of the Cortex-M3 Processor and Core Peripherals - */ - #define __MPU_PRESENT 0 /*!< Other STM32 devices does not provide an MPU */ -#define __CM3_REV 0x0200 /*!< Core Revision r2p0 */ -#define __NVIC_PRIO_BITS 4 /*!< STM32 uses 4 Bits for the Priority Levels */ -#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ - -/** - * @} - */ - -/** @addtogroup Peripheral_interrupt_number_definition - * @{ - */ - -/** - * @brief STM32F10x Interrupt Number Definition, according to the selected device - * in @ref Library_configuration_section - */ - - /*!< Interrupt Number Definition */ -typedef enum -{ -/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ - NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ - HardFault_IRQn = -13, /*!< 3 Cortex-M3 Hard Fault Interrupt */ - MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ - BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ - UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ - SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ - DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ - PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ - SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ - -/****** STM32 specific Interrupt Numbers *********************************************************/ - WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ - PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ - TAMPER_IRQn = 2, /*!< Tamper Interrupt */ - RTC_IRQn = 3, /*!< RTC global Interrupt */ - FLASH_IRQn = 4, /*!< FLASH global Interrupt */ - RCC_IRQn = 5, /*!< RCC global Interrupt */ - EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ - EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ - EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ - EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ - EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ - DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ - DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ - DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ - DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ - DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ - DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ - DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ - ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ - USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ - USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ - TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ - TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ -} IRQn_Type; - - -/** - * @} - */ - -#include "core_cm3.h" -#include "system_stm32f1xx.h" -#include <stdint.h> - -/** @addtogroup Peripheral_registers_structures - * @{ - */ - -/** - * @brief Analog to Digital Converter - */ - -typedef struct -{ - __IO uint32_t SR; - __IO uint32_t CR1; - __IO uint32_t CR2; - __IO uint32_t SMPR1; - __IO uint32_t SMPR2; - __IO uint32_t JOFR1; - __IO uint32_t JOFR2; - __IO uint32_t JOFR3; - __IO uint32_t JOFR4; - __IO uint32_t HTR; - __IO uint32_t LTR; - __IO uint32_t SQR1; - __IO uint32_t SQR2; - __IO uint32_t SQR3; - __IO uint32_t JSQR; - __IO uint32_t JDR1; - __IO uint32_t JDR2; - __IO uint32_t JDR3; - __IO uint32_t JDR4; - __IO uint32_t DR; -} ADC_TypeDef; - -typedef struct -{ - __IO uint32_t SR; /*!< ADC status register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address */ - __IO uint32_t CR1; /*!< ADC control register 1, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x04 */ - __IO uint32_t CR2; /*!< ADC control register 2, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x08 */ - uint32_t RESERVED[16]; - __IO uint32_t DR; /*!< ADC data register, used for ADC multimode (bits common to several ADC instances). Address offset: ADC1 base address + 0x4C */ -} ADC_Common_TypeDef; - -/** - * @brief Backup Registers - */ - -typedef struct -{ - uint32_t RESERVED0; - __IO uint32_t DR1; - __IO uint32_t DR2; - __IO uint32_t DR3; - __IO uint32_t DR4; - __IO uint32_t DR5; - __IO uint32_t DR6; - __IO uint32_t DR7; - __IO uint32_t DR8; - __IO uint32_t DR9; - __IO uint32_t DR10; - __IO uint32_t RTCCR; - __IO uint32_t CR; - __IO uint32_t CSR; -} BKP_TypeDef; - -/** - * @brief Controller Area Network TxMailBox - */ - -typedef struct -{ - __IO uint32_t TIR; - __IO uint32_t TDTR; - __IO uint32_t TDLR; - __IO uint32_t TDHR; -} CAN_TxMailBox_TypeDef; - -/** - * @brief Controller Area Network FIFOMailBox - */ - -typedef struct -{ - __IO uint32_t RIR; - __IO uint32_t RDTR; - __IO uint32_t RDLR; - __IO uint32_t RDHR; -} CAN_FIFOMailBox_TypeDef; - -/** - * @brief Controller Area Network FilterRegister - */ - -typedef struct -{ - __IO uint32_t FR1; - __IO uint32_t FR2; -} CAN_FilterRegister_TypeDef; - -/** - * @brief Controller Area Network - */ - -typedef struct -{ - __IO uint32_t MCR; - __IO uint32_t MSR; - __IO uint32_t TSR; - __IO uint32_t RF0R; - __IO uint32_t RF1R; - __IO uint32_t IER; - __IO uint32_t ESR; - __IO uint32_t BTR; - uint32_t RESERVED0[88]; - CAN_TxMailBox_TypeDef sTxMailBox[3]; - CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; - uint32_t RESERVED1[12]; - __IO uint32_t FMR; - __IO uint32_t FM1R; - uint32_t RESERVED2; - __IO uint32_t FS1R; - uint32_t RESERVED3; - __IO uint32_t FFA1R; - uint32_t RESERVED4; - __IO uint32_t FA1R; - uint32_t RESERVED5[8]; - CAN_FilterRegister_TypeDef sFilterRegister[14]; -} CAN_TypeDef; - -/** - * @brief CRC calculation unit - */ - -typedef struct -{ - __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ - __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ - uint8_t RESERVED0; /*!< Reserved, Address offset: 0x05 */ - uint16_t RESERVED1; /*!< Reserved, Address offset: 0x06 */ - __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ -} CRC_TypeDef; - - -/** - * @brief Debug MCU - */ - -typedef struct -{ - __IO uint32_t IDCODE; - __IO uint32_t CR; -}DBGMCU_TypeDef; - -/** - * @brief DMA Controller - */ - -typedef struct -{ - __IO uint32_t CCR; - __IO uint32_t CNDTR; - __IO uint32_t CPAR; - __IO uint32_t CMAR; -} DMA_Channel_TypeDef; - -typedef struct -{ - __IO uint32_t ISR; - __IO uint32_t IFCR; -} DMA_TypeDef; - - - -/** - * @brief External Interrupt/Event Controller - */ - -typedef struct -{ - __IO uint32_t IMR; - __IO uint32_t EMR; - __IO uint32_t RTSR; - __IO uint32_t FTSR; - __IO uint32_t SWIER; - __IO uint32_t PR; -} EXTI_TypeDef; - -/** - * @brief FLASH Registers - */ - -typedef struct -{ - __IO uint32_t ACR; - __IO uint32_t KEYR; - __IO uint32_t OPTKEYR; - __IO uint32_t SR; - __IO uint32_t CR; - __IO uint32_t AR; - __IO uint32_t RESERVED; - __IO uint32_t OBR; - __IO uint32_t WRPR; -} FLASH_TypeDef; - -/** - * @brief Option Bytes Registers - */ - -typedef struct -{ - __IO uint16_t RDP; - __IO uint16_t USER; - __IO uint16_t Data0; - __IO uint16_t Data1; - __IO uint16_t WRP0; - __IO uint16_t WRP1; - __IO uint16_t WRP2; - __IO uint16_t WRP3; -} OB_TypeDef; - -/** - * @brief General Purpose I/O - */ - -typedef struct -{ - __IO uint32_t CRL; - __IO uint32_t CRH; - __IO uint32_t IDR; - __IO uint32_t ODR; - __IO uint32_t BSRR; - __IO uint32_t BRR; - __IO uint32_t LCKR; -} GPIO_TypeDef; - -/** - * @brief Alternate Function I/O - */ - -typedef struct -{ - __IO uint32_t EVCR; - __IO uint32_t MAPR; - __IO uint32_t EXTICR[4]; - uint32_t RESERVED0; - __IO uint32_t MAPR2; -} AFIO_TypeDef; -/** - * @brief Inter Integrated Circuit Interface - */ - -typedef struct -{ - __IO uint32_t CR1; - __IO uint32_t CR2; - __IO uint32_t OAR1; - __IO uint32_t OAR2; - __IO uint32_t DR; - __IO uint32_t SR1; - __IO uint32_t SR2; - __IO uint32_t CCR; - __IO uint32_t TRISE; -} I2C_TypeDef; - -/** - * @brief Independent WATCHDOG - */ - -typedef struct -{ - __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ - __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ - __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ - __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ -} IWDG_TypeDef; - -/** - * @brief Power Control - */ - -typedef struct -{ - __IO uint32_t CR; - __IO uint32_t CSR; -} PWR_TypeDef; - -/** - * @brief Reset and Clock Control - */ - -typedef struct -{ - __IO uint32_t CR; - __IO uint32_t CFGR; - __IO uint32_t CIR; - __IO uint32_t APB2RSTR; - __IO uint32_t APB1RSTR; - __IO uint32_t AHBENR; - __IO uint32_t APB2ENR; - __IO uint32_t APB1ENR; - __IO uint32_t BDCR; - __IO uint32_t CSR; - - -} RCC_TypeDef; - -/** - * @brief Real-Time Clock - */ - -typedef struct -{ - __IO uint32_t CRH; - __IO uint32_t CRL; - __IO uint32_t PRLH; - __IO uint32_t PRLL; - __IO uint32_t DIVH; - __IO uint32_t DIVL; - __IO uint32_t CNTH; - __IO uint32_t CNTL; - __IO uint32_t ALRH; - __IO uint32_t ALRL; -} RTC_TypeDef; - -/** - * @brief SD host Interface - */ - -typedef struct -{ - __IO uint32_t POWER; - __IO uint32_t CLKCR; - __IO uint32_t ARG; - __IO uint32_t CMD; - __I uint32_t RESPCMD; - __I uint32_t RESP1; - __I uint32_t RESP2; - __I uint32_t RESP3; - __I uint32_t RESP4; - __IO uint32_t DTIMER; - __IO uint32_t DLEN; - __IO uint32_t DCTRL; - __I uint32_t DCOUNT; - __I uint32_t STA; - __IO uint32_t ICR; - __IO uint32_t MASK; - uint32_t RESERVED0[2]; - __I uint32_t FIFOCNT; - uint32_t RESERVED1[13]; - __IO uint32_t FIFO; -} SDIO_TypeDef; - -/** - * @brief Serial Peripheral Interface - */ - -typedef struct -{ - __IO uint32_t CR1; - __IO uint32_t CR2; - __IO uint32_t SR; - __IO uint32_t DR; - __IO uint32_t CRCPR; - __IO uint32_t RXCRCR; - __IO uint32_t TXCRCR; - __IO uint32_t I2SCFGR; -} SPI_TypeDef; - -/** - * @brief TIM Timers - */ -typedef struct -{ - __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ - __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ - __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ - __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ - __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ - __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ - __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ - __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ - __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ - __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ - __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ - __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ - __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ - __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ - __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ - __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ - __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ - __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ - __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ - __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */ - __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ -}TIM_TypeDef; - - -/** - * @brief Universal Synchronous Asynchronous Receiver Transmitter - */ - -typedef struct -{ - __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ - __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ - __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ - __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ - __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ - __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ - __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ -} USART_TypeDef; - -/** - * @brief Universal Serial Bus Full Speed Device - */ - -typedef struct -{ - __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */ - __IO uint16_t RESERVED0; /*!< Reserved */ - __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */ - __IO uint16_t RESERVED1; /*!< Reserved */ - __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */ - __IO uint16_t RESERVED2; /*!< Reserved */ - __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */ - __IO uint16_t RESERVED3; /*!< Reserved */ - __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */ - __IO uint16_t RESERVED4; /*!< Reserved */ - __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */ - __IO uint16_t RESERVED5; /*!< Reserved */ - __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */ - __IO uint16_t RESERVED6; /*!< Reserved */ - __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */ - __IO uint16_t RESERVED7[17]; /*!< Reserved */ - __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */ - __IO uint16_t RESERVED8; /*!< Reserved */ - __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ - __IO uint16_t RESERVED9; /*!< Reserved */ - __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */ - __IO uint16_t RESERVEDA; /*!< Reserved */ - __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */ - __IO uint16_t RESERVEDB; /*!< Reserved */ - __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */ - __IO uint16_t RESERVEDC; /*!< Reserved */ -} USB_TypeDef; - - -/** - * @brief Window WATCHDOG - */ - -typedef struct -{ - __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ - __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ - __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ -} WWDG_TypeDef; - -/** - * @} - */ - -/** @addtogroup Peripheral_memory_map - * @{ - */ - - -#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */ -#define FLASH_BANK1_END ((uint32_t)0x08007FFF) /*!< FLASH END address of bank1 */ -#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */ -#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */ - -#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */ -#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */ - - -/*!< Peripheral memory map */ -#define APB1PERIPH_BASE PERIPH_BASE -#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000) -#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000) - -#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) -#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) -#define RTC_BASE (APB1PERIPH_BASE + 0x2800) -#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) -#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) -#define USART2_BASE (APB1PERIPH_BASE + 0x4400) -#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) -#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) -#define BKP_BASE (APB1PERIPH_BASE + 0x6C00) -#define PWR_BASE (APB1PERIPH_BASE + 0x7000) -#define AFIO_BASE (APB2PERIPH_BASE + 0x0000) -#define EXTI_BASE (APB2PERIPH_BASE + 0x0400) -#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800) -#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00) -#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000) -#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400) -#define ADC1_BASE (APB2PERIPH_BASE + 0x2400) -#define ADC2_BASE (APB2PERIPH_BASE + 0x2800) -#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00) -#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) -#define USART1_BASE (APB2PERIPH_BASE + 0x3800) - -#define SDIO_BASE (PERIPH_BASE + 0x18000) - -#define DMA1_BASE (AHBPERIPH_BASE + 0x0000) -#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x0008) -#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x001C) -#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x0030) -#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x0044) -#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x0058) -#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x006C) -#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x0080) -#define RCC_BASE (AHBPERIPH_BASE + 0x1000) -#define CRC_BASE (AHBPERIPH_BASE + 0x3000) - -#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) /*!< Flash registers base address */ -#define FLASHSIZE_BASE ((uint32_t)0x1FFFF7E0) /*!< FLASH Size register base address */ -#define UID_BASE ((uint32_t)0x1FFFF7E8) /*!< Unique device ID register base address */ -#define OB_BASE ((uint32_t)0x1FFFF800) /*!< Flash Option Bytes base address */ - - - -#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */ - -/* USB device FS */ -#define USB_BASE (APB1PERIPH_BASE + 0x00005C00) /*!< USB_IP Peripheral Registers base address */ -#define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000) /*!< USB_IP Packet Memory Area base address */ - - -/** - * @} - */ - -/** @addtogroup Peripheral_declaration - * @{ - */ - -#define TIM2 ((TIM_TypeDef *) TIM2_BASE) -#define TIM3 ((TIM_TypeDef *) TIM3_BASE) -#define RTC ((RTC_TypeDef *) RTC_BASE) -#define WWDG ((WWDG_TypeDef *) WWDG_BASE) -#define IWDG ((IWDG_TypeDef *) IWDG_BASE) -#define USART2 ((USART_TypeDef *) USART2_BASE) -#define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#define USB ((USB_TypeDef *) USB_BASE) -#define CAN1 ((CAN_TypeDef *) CAN1_BASE) -#define BKP ((BKP_TypeDef *) BKP_BASE) -#define PWR ((PWR_TypeDef *) PWR_BASE) -#define AFIO ((AFIO_TypeDef *) AFIO_BASE) -#define EXTI ((EXTI_TypeDef *) EXTI_BASE) -#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) -#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) -#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) -#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) -#define ADC1 ((ADC_TypeDef *) ADC1_BASE) -#define ADC2 ((ADC_TypeDef *) ADC2_BASE) -#define ADC12_COMMON ((ADC_Common_TypeDef *) ADC1_BASE) -#define TIM1 ((TIM_TypeDef *) TIM1_BASE) -#define SPI1 ((SPI_TypeDef *) SPI1_BASE) -#define USART1 ((USART_TypeDef *) USART1_BASE) -#define SDIO ((SDIO_TypeDef *) SDIO_BASE) -#define DMA1 ((DMA_TypeDef *) DMA1_BASE) -#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) -#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) -#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) -#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) -#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) -#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) -#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) -#define RCC ((RCC_TypeDef *) RCC_BASE) -#define CRC ((CRC_TypeDef *) CRC_BASE) -#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) -#define OB ((OB_TypeDef *) OB_BASE) -#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) - - -/** - * @} - */ - -/** @addtogroup Exported_constants - * @{ - */ - - /** @addtogroup Peripheral_Registers_Bits_Definition - * @{ - */ - -/******************************************************************************/ -/* Peripheral Registers_Bits_Definition */ -/******************************************************************************/ - -/******************************************************************************/ -/* */ -/* CRC calculation unit (CRC) */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for CRC_DR register *********************/ -#define CRC_DR_DR_Pos (0U) -#define CRC_DR_DR_Msk (0xFFFFFFFFU << CRC_DR_DR_Pos) /*!< 0xFFFFFFFF */ -#define CRC_DR_DR CRC_DR_DR_Msk /*!< Data register bits */ - -/******************* Bit definition for CRC_IDR register ********************/ -#define CRC_IDR_IDR_Pos (0U) -#define CRC_IDR_IDR_Msk (0xFFU << CRC_IDR_IDR_Pos) /*!< 0x000000FF */ -#define CRC_IDR_IDR CRC_IDR_IDR_Msk /*!< General-purpose 8-bit data register bits */ - -/******************** Bit definition for CRC_CR register ********************/ -#define CRC_CR_RESET_Pos (0U) -#define CRC_CR_RESET_Msk (0x1U << CRC_CR_RESET_Pos) /*!< 0x00000001 */ -#define CRC_CR_RESET CRC_CR_RESET_Msk /*!< RESET bit */ - -/******************************************************************************/ -/* */ -/* Power Control */ -/* */ -/******************************************************************************/ - -/******************** Bit definition for PWR_CR register ********************/ -#define PWR_CR_LPDS_Pos (0U) -#define PWR_CR_LPDS_Msk (0x1U << PWR_CR_LPDS_Pos) /*!< 0x00000001 */ -#define PWR_CR_LPDS PWR_CR_LPDS_Msk /*!< Low-Power Deepsleep */ -#define PWR_CR_PDDS_Pos (1U) -#define PWR_CR_PDDS_Msk (0x1U << PWR_CR_PDDS_Pos) /*!< 0x00000002 */ -#define PWR_CR_PDDS PWR_CR_PDDS_Msk /*!< Power Down Deepsleep */ -#define PWR_CR_CWUF_Pos (2U) -#define PWR_CR_CWUF_Msk (0x1U << PWR_CR_CWUF_Pos) /*!< 0x00000004 */ -#define PWR_CR_CWUF PWR_CR_CWUF_Msk /*!< Clear Wakeup Flag */ -#define PWR_CR_CSBF_Pos (3U) -#define PWR_CR_CSBF_Msk (0x1U << PWR_CR_CSBF_Pos) /*!< 0x00000008 */ -#define PWR_CR_CSBF PWR_CR_CSBF_Msk /*!< Clear Standby Flag */ -#define PWR_CR_PVDE_Pos (4U) -#define PWR_CR_PVDE_Msk (0x1U << PWR_CR_PVDE_Pos) /*!< 0x00000010 */ -#define PWR_CR_PVDE PWR_CR_PVDE_Msk /*!< Power Voltage Detector Enable */ - -#define PWR_CR_PLS_Pos (5U) -#define PWR_CR_PLS_Msk (0x7U << PWR_CR_PLS_Pos) /*!< 0x000000E0 */ -#define PWR_CR_PLS PWR_CR_PLS_Msk /*!< PLS[2:0] bits (PVD Level Selection) */ -#define PWR_CR_PLS_0 (0x1U << PWR_CR_PLS_Pos) /*!< 0x00000020 */ -#define PWR_CR_PLS_1 (0x2U << PWR_CR_PLS_Pos) /*!< 0x00000040 */ -#define PWR_CR_PLS_2 (0x4U << PWR_CR_PLS_Pos) /*!< 0x00000080 */ - -/*!< PVD level configuration */ -#define PWR_CR_PLS_2V2 ((uint32_t)0x00000000) /*!< PVD level 2.2V */ -#define PWR_CR_PLS_2V3 ((uint32_t)0x00000020) /*!< PVD level 2.3V */ -#define PWR_CR_PLS_2V4 ((uint32_t)0x00000040) /*!< PVD level 2.4V */ -#define PWR_CR_PLS_2V5 ((uint32_t)0x00000060) /*!< PVD level 2.5V */ -#define PWR_CR_PLS_2V6 ((uint32_t)0x00000080) /*!< PVD level 2.6V */ -#define PWR_CR_PLS_2V7 ((uint32_t)0x000000A0) /*!< PVD level 2.7V */ -#define PWR_CR_PLS_2V8 ((uint32_t)0x000000C0) /*!< PVD level 2.8V */ -#define PWR_CR_PLS_2V9 ((uint32_t)0x000000E0) /*!< PVD level 2.9V */ - -#define PWR_CR_DBP_Pos (8U) -#define PWR_CR_DBP_Msk (0x1U << PWR_CR_DBP_Pos) /*!< 0x00000100 */ -#define PWR_CR_DBP PWR_CR_DBP_Msk /*!< Disable Backup Domain write protection */ - - -/******************* Bit definition for PWR_CSR register ********************/ -#define PWR_CSR_WUF_Pos (0U) -#define PWR_CSR_WUF_Msk (0x1U << PWR_CSR_WUF_Pos) /*!< 0x00000001 */ -#define PWR_CSR_WUF PWR_CSR_WUF_Msk /*!< Wakeup Flag */ -#define PWR_CSR_SBF_Pos (1U) -#define PWR_CSR_SBF_Msk (0x1U << PWR_CSR_SBF_Pos) /*!< 0x00000002 */ -#define PWR_CSR_SBF PWR_CSR_SBF_Msk /*!< Standby Flag */ -#define PWR_CSR_PVDO_Pos (2U) -#define PWR_CSR_PVDO_Msk (0x1U << PWR_CSR_PVDO_Pos) /*!< 0x00000004 */ -#define PWR_CSR_PVDO PWR_CSR_PVDO_Msk /*!< PVD Output */ -#define PWR_CSR_EWUP_Pos (8U) -#define PWR_CSR_EWUP_Msk (0x1U << PWR_CSR_EWUP_Pos) /*!< 0x00000100 */ -#define PWR_CSR_EWUP PWR_CSR_EWUP_Msk /*!< Enable WKUP pin */ - -/******************************************************************************/ -/* */ -/* Backup registers */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for BKP_DR1 register ********************/ -#define BKP_DR1_D_Pos (0U) -#define BKP_DR1_D_Msk (0xFFFFU << BKP_DR1_D_Pos) /*!< 0x0000FFFF */ -#define BKP_DR1_D BKP_DR1_D_Msk /*!< Backup data */ - -/******************* Bit definition for BKP_DR2 register ********************/ -#define BKP_DR2_D_Pos (0U) -#define BKP_DR2_D_Msk (0xFFFFU << BKP_DR2_D_Pos) /*!< 0x0000FFFF */ -#define BKP_DR2_D BKP_DR2_D_Msk /*!< Backup data */ - -/******************* Bit definition for BKP_DR3 register ********************/ -#define BKP_DR3_D_Pos (0U) -#define BKP_DR3_D_Msk (0xFFFFU << BKP_DR3_D_Pos) /*!< 0x0000FFFF */ -#define BKP_DR3_D BKP_DR3_D_Msk /*!< Backup data */ - -/******************* Bit definition for BKP_DR4 register ********************/ -#define BKP_DR4_D_Pos (0U) -#define BKP_DR4_D_Msk (0xFFFFU << BKP_DR4_D_Pos) /*!< 0x0000FFFF */ -#define BKP_DR4_D BKP_DR4_D_Msk /*!< Backup data */ - -/******************* Bit definition for BKP_DR5 register ********************/ -#define BKP_DR5_D_Pos (0U) -#define BKP_DR5_D_Msk (0xFFFFU << BKP_DR5_D_Pos) /*!< 0x0000FFFF */ -#define BKP_DR5_D BKP_DR5_D_Msk /*!< Backup data */ - -/******************* Bit definition for BKP_DR6 register ********************/ -#define BKP_DR6_D_Pos (0U) -#define BKP_DR6_D_Msk (0xFFFFU << BKP_DR6_D_Pos) /*!< 0x0000FFFF */ -#define BKP_DR6_D BKP_DR6_D_Msk /*!< Backup data */ - -/******************* Bit definition for BKP_DR7 register ********************/ -#define BKP_DR7_D_Pos (0U) -#define BKP_DR7_D_Msk (0xFFFFU << BKP_DR7_D_Pos) /*!< 0x0000FFFF */ -#define BKP_DR7_D BKP_DR7_D_Msk /*!< Backup data */ - -/******************* Bit definition for BKP_DR8 register ********************/ -#define BKP_DR8_D_Pos (0U) -#define BKP_DR8_D_Msk (0xFFFFU << BKP_DR8_D_Pos) /*!< 0x0000FFFF */ -#define BKP_DR8_D BKP_DR8_D_Msk /*!< Backup data */ - -/******************* Bit definition for BKP_DR9 register ********************/ -#define BKP_DR9_D_Pos (0U) -#define BKP_DR9_D_Msk (0xFFFFU << BKP_DR9_D_Pos) /*!< 0x0000FFFF */ -#define BKP_DR9_D BKP_DR9_D_Msk /*!< Backup data */ - -/******************* Bit definition for BKP_DR10 register *******************/ -#define BKP_DR10_D_Pos (0U) -#define BKP_DR10_D_Msk (0xFFFFU << BKP_DR10_D_Pos) /*!< 0x0000FFFF */ -#define BKP_DR10_D BKP_DR10_D_Msk /*!< Backup data */ - -#define RTC_BKP_NUMBER 10 - -/****************** Bit definition for BKP_RTCCR register *******************/ -#define BKP_RTCCR_CAL_Pos (0U) -#define BKP_RTCCR_CAL_Msk (0x7FU << BKP_RTCCR_CAL_Pos) /*!< 0x0000007F */ -#define BKP_RTCCR_CAL BKP_RTCCR_CAL_Msk /*!< Calibration value */ -#define BKP_RTCCR_CCO_Pos (7U) -#define BKP_RTCCR_CCO_Msk (0x1U << BKP_RTCCR_CCO_Pos) /*!< 0x00000080 */ -#define BKP_RTCCR_CCO BKP_RTCCR_CCO_Msk /*!< Calibration Clock Output */ -#define BKP_RTCCR_ASOE_Pos (8U) -#define BKP_RTCCR_ASOE_Msk (0x1U << BKP_RTCCR_ASOE_Pos) /*!< 0x00000100 */ -#define BKP_RTCCR_ASOE BKP_RTCCR_ASOE_Msk /*!< Alarm or Second Output Enable */ -#define BKP_RTCCR_ASOS_Pos (9U) -#define BKP_RTCCR_ASOS_Msk (0x1U << BKP_RTCCR_ASOS_Pos) /*!< 0x00000200 */ -#define BKP_RTCCR_ASOS BKP_RTCCR_ASOS_Msk /*!< Alarm or Second Output Selection */ - -/******************** Bit definition for BKP_CR register ********************/ -#define BKP_CR_TPE_Pos (0U) -#define BKP_CR_TPE_Msk (0x1U << BKP_CR_TPE_Pos) /*!< 0x00000001 */ -#define BKP_CR_TPE BKP_CR_TPE_Msk /*!< TAMPER pin enable */ -#define BKP_CR_TPAL_Pos (1U) -#define BKP_CR_TPAL_Msk (0x1U << BKP_CR_TPAL_Pos) /*!< 0x00000002 */ -#define BKP_CR_TPAL BKP_CR_TPAL_Msk /*!< TAMPER pin active level */ - -/******************* Bit definition for BKP_CSR register ********************/ -#define BKP_CSR_CTE_Pos (0U) -#define BKP_CSR_CTE_Msk (0x1U << BKP_CSR_CTE_Pos) /*!< 0x00000001 */ -#define BKP_CSR_CTE BKP_CSR_CTE_Msk /*!< Clear Tamper event */ -#define BKP_CSR_CTI_Pos (1U) -#define BKP_CSR_CTI_Msk (0x1U << BKP_CSR_CTI_Pos) /*!< 0x00000002 */ -#define BKP_CSR_CTI BKP_CSR_CTI_Msk /*!< Clear Tamper Interrupt */ -#define BKP_CSR_TPIE_Pos (2U) -#define BKP_CSR_TPIE_Msk (0x1U << BKP_CSR_TPIE_Pos) /*!< 0x00000004 */ -#define BKP_CSR_TPIE BKP_CSR_TPIE_Msk /*!< TAMPER Pin interrupt enable */ -#define BKP_CSR_TEF_Pos (8U) -#define BKP_CSR_TEF_Msk (0x1U << BKP_CSR_TEF_Pos) /*!< 0x00000100 */ -#define BKP_CSR_TEF BKP_CSR_TEF_Msk /*!< Tamper Event Flag */ -#define BKP_CSR_TIF_Pos (9U) -#define BKP_CSR_TIF_Msk (0x1U << BKP_CSR_TIF_Pos) /*!< 0x00000200 */ -#define BKP_CSR_TIF BKP_CSR_TIF_Msk /*!< Tamper Interrupt Flag */ - -/******************************************************************************/ -/* */ -/* Reset and Clock Control */ -/* */ -/******************************************************************************/ - -/******************** Bit definition for RCC_CR register ********************/ -#define RCC_CR_HSION_Pos (0U) -#define RCC_CR_HSION_Msk (0x1U << RCC_CR_HSION_Pos) /*!< 0x00000001 */ -#define RCC_CR_HSION RCC_CR_HSION_Msk /*!< Internal High Speed clock enable */ -#define RCC_CR_HSIRDY_Pos (1U) -#define RCC_CR_HSIRDY_Msk (0x1U << RCC_CR_HSIRDY_Pos) /*!< 0x00000002 */ -#define RCC_CR_HSIRDY RCC_CR_HSIRDY_Msk /*!< Internal High Speed clock ready flag */ -#define RCC_CR_HSITRIM_Pos (3U) -#define RCC_CR_HSITRIM_Msk (0x1FU << RCC_CR_HSITRIM_Pos) /*!< 0x000000F8 */ -#define RCC_CR_HSITRIM RCC_CR_HSITRIM_Msk /*!< Internal High Speed clock trimming */ -#define RCC_CR_HSICAL_Pos (8U) -#define RCC_CR_HSICAL_Msk (0xFFU << RCC_CR_HSICAL_Pos) /*!< 0x0000FF00 */ -#define RCC_CR_HSICAL RCC_CR_HSICAL_Msk /*!< Internal High Speed clock Calibration */ -#define RCC_CR_HSEON_Pos (16U) -#define RCC_CR_HSEON_Msk (0x1U << RCC_CR_HSEON_Pos) /*!< 0x00010000 */ -#define RCC_CR_HSEON RCC_CR_HSEON_Msk /*!< External High Speed clock enable */ -#define RCC_CR_HSERDY_Pos (17U) -#define RCC_CR_HSERDY_Msk (0x1U << RCC_CR_HSERDY_Pos) /*!< 0x00020000 */ -#define RCC_CR_HSERDY RCC_CR_HSERDY_Msk /*!< External High Speed clock ready flag */ -#define RCC_CR_HSEBYP_Pos (18U) -#define RCC_CR_HSEBYP_Msk (0x1U << RCC_CR_HSEBYP_Pos) /*!< 0x00040000 */ -#define RCC_CR_HSEBYP RCC_CR_HSEBYP_Msk /*!< External High Speed clock Bypass */ -#define RCC_CR_CSSON_Pos (19U) -#define RCC_CR_CSSON_Msk (0x1U << RCC_CR_CSSON_Pos) /*!< 0x00080000 */ -#define RCC_CR_CSSON RCC_CR_CSSON_Msk /*!< Clock Security System enable */ -#define RCC_CR_PLLON_Pos (24U) -#define RCC_CR_PLLON_Msk (0x1U << RCC_CR_PLLON_Pos) /*!< 0x01000000 */ -#define RCC_CR_PLLON RCC_CR_PLLON_Msk /*!< PLL enable */ -#define RCC_CR_PLLRDY_Pos (25U) -#define RCC_CR_PLLRDY_Msk (0x1U << RCC_CR_PLLRDY_Pos) /*!< 0x02000000 */ -#define RCC_CR_PLLRDY RCC_CR_PLLRDY_Msk /*!< PLL clock ready flag */ - - -/******************* Bit definition for RCC_CFGR register *******************/ -/*!< SW configuration */ -#define RCC_CFGR_SW_Pos (0U) -#define RCC_CFGR_SW_Msk (0x3U << RCC_CFGR_SW_Pos) /*!< 0x00000003 */ -#define RCC_CFGR_SW RCC_CFGR_SW_Msk /*!< SW[1:0] bits (System clock Switch) */ -#define RCC_CFGR_SW_0 (0x1U << RCC_CFGR_SW_Pos) /*!< 0x00000001 */ -#define RCC_CFGR_SW_1 (0x2U << RCC_CFGR_SW_Pos) /*!< 0x00000002 */ - -#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */ -#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */ -#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */ - -/*!< SWS configuration */ -#define RCC_CFGR_SWS_Pos (2U) -#define RCC_CFGR_SWS_Msk (0x3U << RCC_CFGR_SWS_Pos) /*!< 0x0000000C */ -#define RCC_CFGR_SWS RCC_CFGR_SWS_Msk /*!< SWS[1:0] bits (System Clock Switch Status) */ -#define RCC_CFGR_SWS_0 (0x1U << RCC_CFGR_SWS_Pos) /*!< 0x00000004 */ -#define RCC_CFGR_SWS_1 (0x2U << RCC_CFGR_SWS_Pos) /*!< 0x00000008 */ - -#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */ -#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */ -#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */ - -/*!< HPRE configuration */ -#define RCC_CFGR_HPRE_Pos (4U) -#define RCC_CFGR_HPRE_Msk (0xFU << RCC_CFGR_HPRE_Pos) /*!< 0x000000F0 */ -#define RCC_CFGR_HPRE RCC_CFGR_HPRE_Msk /*!< HPRE[3:0] bits (AHB prescaler) */ -#define RCC_CFGR_HPRE_0 (0x1U << RCC_CFGR_HPRE_Pos) /*!< 0x00000010 */ -#define RCC_CFGR_HPRE_1 (0x2U << RCC_CFGR_HPRE_Pos) /*!< 0x00000020 */ -#define RCC_CFGR_HPRE_2 (0x4U << RCC_CFGR_HPRE_Pos) /*!< 0x00000040 */ -#define RCC_CFGR_HPRE_3 (0x8U << RCC_CFGR_HPRE_Pos) /*!< 0x00000080 */ - -#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */ -#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */ -#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */ -#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */ -#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */ -#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */ -#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */ -#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */ -#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */ - -/*!< PPRE1 configuration */ -#define RCC_CFGR_PPRE1_Pos (8U) -#define RCC_CFGR_PPRE1_Msk (0x7U << RCC_CFGR_PPRE1_Pos) /*!< 0x00000700 */ -#define RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_Msk /*!< PRE1[2:0] bits (APB1 prescaler) */ -#define RCC_CFGR_PPRE1_0 (0x1U << RCC_CFGR_PPRE1_Pos) /*!< 0x00000100 */ -#define RCC_CFGR_PPRE1_1 (0x2U << RCC_CFGR_PPRE1_Pos) /*!< 0x00000200 */ -#define RCC_CFGR_PPRE1_2 (0x4U << RCC_CFGR_PPRE1_Pos) /*!< 0x00000400 */ - -#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ -#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */ -#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */ -#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */ -#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */ - -/*!< PPRE2 configuration */ -#define RCC_CFGR_PPRE2_Pos (11U) -#define RCC_CFGR_PPRE2_Msk (0x7U << RCC_CFGR_PPRE2_Pos) /*!< 0x00003800 */ -#define RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_Msk /*!< PRE2[2:0] bits (APB2 prescaler) */ -#define RCC_CFGR_PPRE2_0 (0x1U << RCC_CFGR_PPRE2_Pos) /*!< 0x00000800 */ -#define RCC_CFGR_PPRE2_1 (0x2U << RCC_CFGR_PPRE2_Pos) /*!< 0x00001000 */ -#define RCC_CFGR_PPRE2_2 (0x4U << RCC_CFGR_PPRE2_Pos) /*!< 0x00002000 */ - -#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ -#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */ -#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */ -#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */ -#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */ - -/*!< ADCPPRE configuration */ -#define RCC_CFGR_ADCPRE_Pos (14U) -#define RCC_CFGR_ADCPRE_Msk (0x3U << RCC_CFGR_ADCPRE_Pos) /*!< 0x0000C000 */ -#define RCC_CFGR_ADCPRE RCC_CFGR_ADCPRE_Msk /*!< ADCPRE[1:0] bits (ADC prescaler) */ -#define RCC_CFGR_ADCPRE_0 (0x1U << RCC_CFGR_ADCPRE_Pos) /*!< 0x00004000 */ -#define RCC_CFGR_ADCPRE_1 (0x2U << RCC_CFGR_ADCPRE_Pos) /*!< 0x00008000 */ - -#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK2 divided by 2 */ -#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK2 divided by 4 */ -#define RCC_CFGR_ADCPRE_DIV6 ((uint32_t)0x00008000) /*!< PCLK2 divided by 6 */ -#define RCC_CFGR_ADCPRE_DIV8 ((uint32_t)0x0000C000) /*!< PCLK2 divided by 8 */ - -#define RCC_CFGR_PLLSRC_Pos (16U) -#define RCC_CFGR_PLLSRC_Msk (0x1U << RCC_CFGR_PLLSRC_Pos) /*!< 0x00010000 */ -#define RCC_CFGR_PLLSRC RCC_CFGR_PLLSRC_Msk /*!< PLL entry clock source */ - -#define RCC_CFGR_PLLXTPRE_Pos (17U) -#define RCC_CFGR_PLLXTPRE_Msk (0x1U << RCC_CFGR_PLLXTPRE_Pos) /*!< 0x00020000 */ -#define RCC_CFGR_PLLXTPRE RCC_CFGR_PLLXTPRE_Msk /*!< HSE divider for PLL entry */ - -/*!< PLLMUL configuration */ -#define RCC_CFGR_PLLMULL_Pos (18U) -#define RCC_CFGR_PLLMULL_Msk (0xFU << RCC_CFGR_PLLMULL_Pos) /*!< 0x003C0000 */ -#define RCC_CFGR_PLLMULL RCC_CFGR_PLLMULL_Msk /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ -#define RCC_CFGR_PLLMULL_0 (0x1U << RCC_CFGR_PLLMULL_Pos) /*!< 0x00040000 */ -#define RCC_CFGR_PLLMULL_1 (0x2U << RCC_CFGR_PLLMULL_Pos) /*!< 0x00080000 */ -#define RCC_CFGR_PLLMULL_2 (0x4U << RCC_CFGR_PLLMULL_Pos) /*!< 0x00100000 */ -#define RCC_CFGR_PLLMULL_3 (0x8U << RCC_CFGR_PLLMULL_Pos) /*!< 0x00200000 */ - -#define RCC_CFGR_PLLXTPRE_HSE ((uint32_t)0x00000000) /*!< HSE clock not divided for PLL entry */ -#define RCC_CFGR_PLLXTPRE_HSE_DIV2 ((uint32_t)0x00020000) /*!< HSE clock divided by 2 for PLL entry */ - -#define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */ -#define RCC_CFGR_PLLMULL3_Pos (18U) -#define RCC_CFGR_PLLMULL3_Msk (0x1U << RCC_CFGR_PLLMULL3_Pos) /*!< 0x00040000 */ -#define RCC_CFGR_PLLMULL3 RCC_CFGR_PLLMULL3_Msk /*!< PLL input clock*3 */ -#define RCC_CFGR_PLLMULL4_Pos (19U) -#define RCC_CFGR_PLLMULL4_Msk (0x1U << RCC_CFGR_PLLMULL4_Pos) /*!< 0x00080000 */ -#define RCC_CFGR_PLLMULL4 RCC_CFGR_PLLMULL4_Msk /*!< PLL input clock*4 */ -#define RCC_CFGR_PLLMULL5_Pos (18U) -#define RCC_CFGR_PLLMULL5_Msk (0x3U << RCC_CFGR_PLLMULL5_Pos) /*!< 0x000C0000 */ -#define RCC_CFGR_PLLMULL5 RCC_CFGR_PLLMULL5_Msk /*!< PLL input clock*5 */ -#define RCC_CFGR_PLLMULL6_Pos (20U) -#define RCC_CFGR_PLLMULL6_Msk (0x1U << RCC_CFGR_PLLMULL6_Pos) /*!< 0x00100000 */ -#define RCC_CFGR_PLLMULL6 RCC_CFGR_PLLMULL6_Msk /*!< PLL input clock*6 */ -#define RCC_CFGR_PLLMULL7_Pos (18U) -#define RCC_CFGR_PLLMULL7_Msk (0x5U << RCC_CFGR_PLLMULL7_Pos) /*!< 0x00140000 */ -#define RCC_CFGR_PLLMULL7 RCC_CFGR_PLLMULL7_Msk /*!< PLL input clock*7 */ -#define RCC_CFGR_PLLMULL8_Pos (19U) -#define RCC_CFGR_PLLMULL8_Msk (0x3U << RCC_CFGR_PLLMULL8_Pos) /*!< 0x00180000 */ -#define RCC_CFGR_PLLMULL8 RCC_CFGR_PLLMULL8_Msk /*!< PLL input clock*8 */ -#define RCC_CFGR_PLLMULL9_Pos (18U) -#define RCC_CFGR_PLLMULL9_Msk (0x7U << RCC_CFGR_PLLMULL9_Pos) /*!< 0x001C0000 */ -#define RCC_CFGR_PLLMULL9 RCC_CFGR_PLLMULL9_Msk /*!< PLL input clock*9 */ -#define RCC_CFGR_PLLMULL10_Pos (21U) -#define RCC_CFGR_PLLMULL10_Msk (0x1U << RCC_CFGR_PLLMULL10_Pos) /*!< 0x00200000 */ -#define RCC_CFGR_PLLMULL10 RCC_CFGR_PLLMULL10_Msk /*!< PLL input clock10 */ -#define RCC_CFGR_PLLMULL11_Pos (18U) -#define RCC_CFGR_PLLMULL11_Msk (0x9U << RCC_CFGR_PLLMULL11_Pos) /*!< 0x00240000 */ -#define RCC_CFGR_PLLMULL11 RCC_CFGR_PLLMULL11_Msk /*!< PLL input clock*11 */ -#define RCC_CFGR_PLLMULL12_Pos (19U) -#define RCC_CFGR_PLLMULL12_Msk (0x5U << RCC_CFGR_PLLMULL12_Pos) /*!< 0x00280000 */ -#define RCC_CFGR_PLLMULL12 RCC_CFGR_PLLMULL12_Msk /*!< PLL input clock*12 */ -#define RCC_CFGR_PLLMULL13_Pos (18U) -#define RCC_CFGR_PLLMULL13_Msk (0xBU << RCC_CFGR_PLLMULL13_Pos) /*!< 0x002C0000 */ -#define RCC_CFGR_PLLMULL13 RCC_CFGR_PLLMULL13_Msk /*!< PLL input clock*13 */ -#define RCC_CFGR_PLLMULL14_Pos (20U) -#define RCC_CFGR_PLLMULL14_Msk (0x3U << RCC_CFGR_PLLMULL14_Pos) /*!< 0x00300000 */ -#define RCC_CFGR_PLLMULL14 RCC_CFGR_PLLMULL14_Msk /*!< PLL input clock*14 */ -#define RCC_CFGR_PLLMULL15_Pos (18U) -#define RCC_CFGR_PLLMULL15_Msk (0xDU << RCC_CFGR_PLLMULL15_Pos) /*!< 0x00340000 */ -#define RCC_CFGR_PLLMULL15 RCC_CFGR_PLLMULL15_Msk /*!< PLL input clock*15 */ -#define RCC_CFGR_PLLMULL16_Pos (19U) -#define RCC_CFGR_PLLMULL16_Msk (0x7U << RCC_CFGR_PLLMULL16_Pos) /*!< 0x00380000 */ -#define RCC_CFGR_PLLMULL16 RCC_CFGR_PLLMULL16_Msk /*!< PLL input clock*16 */ -#define RCC_CFGR_USBPRE_Pos (22U) -#define RCC_CFGR_USBPRE_Msk (0x1U << RCC_CFGR_USBPRE_Pos) /*!< 0x00400000 */ -#define RCC_CFGR_USBPRE RCC_CFGR_USBPRE_Msk /*!< USB Device prescaler */ - -/*!< MCO configuration */ -#define RCC_CFGR_MCO_Pos (24U) -#define RCC_CFGR_MCO_Msk (0x7U << RCC_CFGR_MCO_Pos) /*!< 0x07000000 */ -#define RCC_CFGR_MCO RCC_CFGR_MCO_Msk /*!< MCO[2:0] bits (Microcontroller Clock Output) */ -#define RCC_CFGR_MCO_0 (0x1U << RCC_CFGR_MCO_Pos) /*!< 0x01000000 */ -#define RCC_CFGR_MCO_1 (0x2U << RCC_CFGR_MCO_Pos) /*!< 0x02000000 */ -#define RCC_CFGR_MCO_2 (0x4U << RCC_CFGR_MCO_Pos) /*!< 0x04000000 */ - -#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ -#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ -#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ -#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ -#define RCC_CFGR_MCO_PLLCLK_DIV2 ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ - - /* Reference defines */ - #define RCC_CFGR_MCOSEL RCC_CFGR_MCO - #define RCC_CFGR_MCOSEL_0 RCC_CFGR_MCO_0 - #define RCC_CFGR_MCOSEL_1 RCC_CFGR_MCO_1 - #define RCC_CFGR_MCOSEL_2 RCC_CFGR_MCO_2 - #define RCC_CFGR_MCOSEL_NOCLOCK RCC_CFGR_MCO_NOCLOCK - #define RCC_CFGR_MCOSEL_SYSCLK RCC_CFGR_MCO_SYSCLK - #define RCC_CFGR_MCOSEL_HSI RCC_CFGR_MCO_HSI - #define RCC_CFGR_MCOSEL_HSE RCC_CFGR_MCO_HSE - #define RCC_CFGR_MCOSEL_PLL_DIV2 RCC_CFGR_MCO_PLLCLK_DIV2 - -/*!<****************** Bit definition for RCC_CIR register ********************/ -#define RCC_CIR_LSIRDYF_Pos (0U) -#define RCC_CIR_LSIRDYF_Msk (0x1U << RCC_CIR_LSIRDYF_Pos) /*!< 0x00000001 */ -#define RCC_CIR_LSIRDYF RCC_CIR_LSIRDYF_Msk /*!< LSI Ready Interrupt flag */ -#define RCC_CIR_LSERDYF_Pos (1U) -#define RCC_CIR_LSERDYF_Msk (0x1U << RCC_CIR_LSERDYF_Pos) /*!< 0x00000002 */ -#define RCC_CIR_LSERDYF RCC_CIR_LSERDYF_Msk /*!< LSE Ready Interrupt flag */ -#define RCC_CIR_HSIRDYF_Pos (2U) -#define RCC_CIR_HSIRDYF_Msk (0x1U << RCC_CIR_HSIRDYF_Pos) /*!< 0x00000004 */ -#define RCC_CIR_HSIRDYF RCC_CIR_HSIRDYF_Msk /*!< HSI Ready Interrupt flag */ -#define RCC_CIR_HSERDYF_Pos (3U) -#define RCC_CIR_HSERDYF_Msk (0x1U << RCC_CIR_HSERDYF_Pos) /*!< 0x00000008 */ -#define RCC_CIR_HSERDYF RCC_CIR_HSERDYF_Msk /*!< HSE Ready Interrupt flag */ -#define RCC_CIR_PLLRDYF_Pos (4U) -#define RCC_CIR_PLLRDYF_Msk (0x1U << RCC_CIR_PLLRDYF_Pos) /*!< 0x00000010 */ -#define RCC_CIR_PLLRDYF RCC_CIR_PLLRDYF_Msk /*!< PLL Ready Interrupt flag */ -#define RCC_CIR_CSSF_Pos (7U) -#define RCC_CIR_CSSF_Msk (0x1U << RCC_CIR_CSSF_Pos) /*!< 0x00000080 */ -#define RCC_CIR_CSSF RCC_CIR_CSSF_Msk /*!< Clock Security System Interrupt flag */ -#define RCC_CIR_LSIRDYIE_Pos (8U) -#define RCC_CIR_LSIRDYIE_Msk (0x1U << RCC_CIR_LSIRDYIE_Pos) /*!< 0x00000100 */ -#define RCC_CIR_LSIRDYIE RCC_CIR_LSIRDYIE_Msk /*!< LSI Ready Interrupt Enable */ -#define RCC_CIR_LSERDYIE_Pos (9U) -#define RCC_CIR_LSERDYIE_Msk (0x1U << RCC_CIR_LSERDYIE_Pos) /*!< 0x00000200 */ -#define RCC_CIR_LSERDYIE RCC_CIR_LSERDYIE_Msk /*!< LSE Ready Interrupt Enable */ -#define RCC_CIR_HSIRDYIE_Pos (10U) -#define RCC_CIR_HSIRDYIE_Msk (0x1U << RCC_CIR_HSIRDYIE_Pos) /*!< 0x00000400 */ -#define RCC_CIR_HSIRDYIE RCC_CIR_HSIRDYIE_Msk /*!< HSI Ready Interrupt Enable */ -#define RCC_CIR_HSERDYIE_Pos (11U) -#define RCC_CIR_HSERDYIE_Msk (0x1U << RCC_CIR_HSERDYIE_Pos) /*!< 0x00000800 */ -#define RCC_CIR_HSERDYIE RCC_CIR_HSERDYIE_Msk /*!< HSE Ready Interrupt Enable */ -#define RCC_CIR_PLLRDYIE_Pos (12U) -#define RCC_CIR_PLLRDYIE_Msk (0x1U << RCC_CIR_PLLRDYIE_Pos) /*!< 0x00001000 */ -#define RCC_CIR_PLLRDYIE RCC_CIR_PLLRDYIE_Msk /*!< PLL Ready Interrupt Enable */ -#define RCC_CIR_LSIRDYC_Pos (16U) -#define RCC_CIR_LSIRDYC_Msk (0x1U << RCC_CIR_LSIRDYC_Pos) /*!< 0x00010000 */ -#define RCC_CIR_LSIRDYC RCC_CIR_LSIRDYC_Msk /*!< LSI Ready Interrupt Clear */ -#define RCC_CIR_LSERDYC_Pos (17U) -#define RCC_CIR_LSERDYC_Msk (0x1U << RCC_CIR_LSERDYC_Pos) /*!< 0x00020000 */ -#define RCC_CIR_LSERDYC RCC_CIR_LSERDYC_Msk /*!< LSE Ready Interrupt Clear */ -#define RCC_CIR_HSIRDYC_Pos (18U) -#define RCC_CIR_HSIRDYC_Msk (0x1U << RCC_CIR_HSIRDYC_Pos) /*!< 0x00040000 */ -#define RCC_CIR_HSIRDYC RCC_CIR_HSIRDYC_Msk /*!< HSI Ready Interrupt Clear */ -#define RCC_CIR_HSERDYC_Pos (19U) -#define RCC_CIR_HSERDYC_Msk (0x1U << RCC_CIR_HSERDYC_Pos) /*!< 0x00080000 */ -#define RCC_CIR_HSERDYC RCC_CIR_HSERDYC_Msk /*!< HSE Ready Interrupt Clear */ -#define RCC_CIR_PLLRDYC_Pos (20U) -#define RCC_CIR_PLLRDYC_Msk (0x1U << RCC_CIR_PLLRDYC_Pos) /*!< 0x00100000 */ -#define RCC_CIR_PLLRDYC RCC_CIR_PLLRDYC_Msk /*!< PLL Ready Interrupt Clear */ -#define RCC_CIR_CSSC_Pos (23U) -#define RCC_CIR_CSSC_Msk (0x1U << RCC_CIR_CSSC_Pos) /*!< 0x00800000 */ -#define RCC_CIR_CSSC RCC_CIR_CSSC_Msk /*!< Clock Security System Interrupt Clear */ - - -/***************** Bit definition for RCC_APB2RSTR register *****************/ -#define RCC_APB2RSTR_AFIORST_Pos (0U) -#define RCC_APB2RSTR_AFIORST_Msk (0x1U << RCC_APB2RSTR_AFIORST_Pos) /*!< 0x00000001 */ -#define RCC_APB2RSTR_AFIORST RCC_APB2RSTR_AFIORST_Msk /*!< Alternate Function I/O reset */ -#define RCC_APB2RSTR_IOPARST_Pos (2U) -#define RCC_APB2RSTR_IOPARST_Msk (0x1U << RCC_APB2RSTR_IOPARST_Pos) /*!< 0x00000004 */ -#define RCC_APB2RSTR_IOPARST RCC_APB2RSTR_IOPARST_Msk /*!< I/O port A reset */ -#define RCC_APB2RSTR_IOPBRST_Pos (3U) -#define RCC_APB2RSTR_IOPBRST_Msk (0x1U << RCC_APB2RSTR_IOPBRST_Pos) /*!< 0x00000008 */ -#define RCC_APB2RSTR_IOPBRST RCC_APB2RSTR_IOPBRST_Msk /*!< I/O port B reset */ -#define RCC_APB2RSTR_IOPCRST_Pos (4U) -#define RCC_APB2RSTR_IOPCRST_Msk (0x1U << RCC_APB2RSTR_IOPCRST_Pos) /*!< 0x00000010 */ -#define RCC_APB2RSTR_IOPCRST RCC_APB2RSTR_IOPCRST_Msk /*!< I/O port C reset */ -#define RCC_APB2RSTR_IOPDRST_Pos (5U) -#define RCC_APB2RSTR_IOPDRST_Msk (0x1U << RCC_APB2RSTR_IOPDRST_Pos) /*!< 0x00000020 */ -#define RCC_APB2RSTR_IOPDRST RCC_APB2RSTR_IOPDRST_Msk /*!< I/O port D reset */ -#define RCC_APB2RSTR_ADC1RST_Pos (9U) -#define RCC_APB2RSTR_ADC1RST_Msk (0x1U << RCC_APB2RSTR_ADC1RST_Pos) /*!< 0x00000200 */ -#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADC1RST_Msk /*!< ADC 1 interface reset */ - -#define RCC_APB2RSTR_ADC2RST_Pos (10U) -#define RCC_APB2RSTR_ADC2RST_Msk (0x1U << RCC_APB2RSTR_ADC2RST_Pos) /*!< 0x00000400 */ -#define RCC_APB2RSTR_ADC2RST RCC_APB2RSTR_ADC2RST_Msk /*!< ADC 2 interface reset */ - -#define RCC_APB2RSTR_TIM1RST_Pos (11U) -#define RCC_APB2RSTR_TIM1RST_Msk (0x1U << RCC_APB2RSTR_TIM1RST_Pos) /*!< 0x00000800 */ -#define RCC_APB2RSTR_TIM1RST RCC_APB2RSTR_TIM1RST_Msk /*!< TIM1 Timer reset */ -#define RCC_APB2RSTR_SPI1RST_Pos (12U) -#define RCC_APB2RSTR_SPI1RST_Msk (0x1U << RCC_APB2RSTR_SPI1RST_Pos) /*!< 0x00001000 */ -#define RCC_APB2RSTR_SPI1RST RCC_APB2RSTR_SPI1RST_Msk /*!< SPI 1 reset */ -#define RCC_APB2RSTR_USART1RST_Pos (14U) -#define RCC_APB2RSTR_USART1RST_Msk (0x1U << RCC_APB2RSTR_USART1RST_Pos) /*!< 0x00004000 */ -#define RCC_APB2RSTR_USART1RST RCC_APB2RSTR_USART1RST_Msk /*!< USART1 reset */ - - - - - - -/***************** Bit definition for RCC_APB1RSTR register *****************/ -#define RCC_APB1RSTR_TIM2RST_Pos (0U) -#define RCC_APB1RSTR_TIM2RST_Msk (0x1U << RCC_APB1RSTR_TIM2RST_Pos) /*!< 0x00000001 */ -#define RCC_APB1RSTR_TIM2RST RCC_APB1RSTR_TIM2RST_Msk /*!< Timer 2 reset */ -#define RCC_APB1RSTR_TIM3RST_Pos (1U) -#define RCC_APB1RSTR_TIM3RST_Msk (0x1U << RCC_APB1RSTR_TIM3RST_Pos) /*!< 0x00000002 */ -#define RCC_APB1RSTR_TIM3RST RCC_APB1RSTR_TIM3RST_Msk /*!< Timer 3 reset */ -#define RCC_APB1RSTR_WWDGRST_Pos (11U) -#define RCC_APB1RSTR_WWDGRST_Msk (0x1U << RCC_APB1RSTR_WWDGRST_Pos) /*!< 0x00000800 */ -#define RCC_APB1RSTR_WWDGRST RCC_APB1RSTR_WWDGRST_Msk /*!< Window Watchdog reset */ -#define RCC_APB1RSTR_USART2RST_Pos (17U) -#define RCC_APB1RSTR_USART2RST_Msk (0x1U << RCC_APB1RSTR_USART2RST_Pos) /*!< 0x00020000 */ -#define RCC_APB1RSTR_USART2RST RCC_APB1RSTR_USART2RST_Msk /*!< USART 2 reset */ -#define RCC_APB1RSTR_I2C1RST_Pos (21U) -#define RCC_APB1RSTR_I2C1RST_Msk (0x1U << RCC_APB1RSTR_I2C1RST_Pos) /*!< 0x00200000 */ -#define RCC_APB1RSTR_I2C1RST RCC_APB1RSTR_I2C1RST_Msk /*!< I2C 1 reset */ - -#define RCC_APB1RSTR_CAN1RST_Pos (25U) -#define RCC_APB1RSTR_CAN1RST_Msk (0x1U << RCC_APB1RSTR_CAN1RST_Pos) /*!< 0x02000000 */ -#define RCC_APB1RSTR_CAN1RST RCC_APB1RSTR_CAN1RST_Msk /*!< CAN1 reset */ - -#define RCC_APB1RSTR_BKPRST_Pos (27U) -#define RCC_APB1RSTR_BKPRST_Msk (0x1U << RCC_APB1RSTR_BKPRST_Pos) /*!< 0x08000000 */ -#define RCC_APB1RSTR_BKPRST RCC_APB1RSTR_BKPRST_Msk /*!< Backup interface reset */ -#define RCC_APB1RSTR_PWRRST_Pos (28U) -#define RCC_APB1RSTR_PWRRST_Msk (0x1U << RCC_APB1RSTR_PWRRST_Pos) /*!< 0x10000000 */ -#define RCC_APB1RSTR_PWRRST RCC_APB1RSTR_PWRRST_Msk /*!< Power interface reset */ - - -#define RCC_APB1RSTR_USBRST_Pos (23U) -#define RCC_APB1RSTR_USBRST_Msk (0x1U << RCC_APB1RSTR_USBRST_Pos) /*!< 0x00800000 */ -#define RCC_APB1RSTR_USBRST RCC_APB1RSTR_USBRST_Msk /*!< USB Device reset */ - - - - - - -/****************** Bit definition for RCC_AHBENR register ******************/ -#define RCC_AHBENR_DMA1EN_Pos (0U) -#define RCC_AHBENR_DMA1EN_Msk (0x1U << RCC_AHBENR_DMA1EN_Pos) /*!< 0x00000001 */ -#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMA1EN_Msk /*!< DMA1 clock enable */ -#define RCC_AHBENR_SRAMEN_Pos (2U) -#define RCC_AHBENR_SRAMEN_Msk (0x1U << RCC_AHBENR_SRAMEN_Pos) /*!< 0x00000004 */ -#define RCC_AHBENR_SRAMEN RCC_AHBENR_SRAMEN_Msk /*!< SRAM interface clock enable */ -#define RCC_AHBENR_FLITFEN_Pos (4U) -#define RCC_AHBENR_FLITFEN_Msk (0x1U << RCC_AHBENR_FLITFEN_Pos) /*!< 0x00000010 */ -#define RCC_AHBENR_FLITFEN RCC_AHBENR_FLITFEN_Msk /*!< FLITF clock enable */ -#define RCC_AHBENR_CRCEN_Pos (6U) -#define RCC_AHBENR_CRCEN_Msk (0x1U << RCC_AHBENR_CRCEN_Pos) /*!< 0x00000040 */ -#define RCC_AHBENR_CRCEN RCC_AHBENR_CRCEN_Msk /*!< CRC clock enable */ - - - - -/****************** Bit definition for RCC_APB2ENR register *****************/ -#define RCC_APB2ENR_AFIOEN_Pos (0U) -#define RCC_APB2ENR_AFIOEN_Msk (0x1U << RCC_APB2ENR_AFIOEN_Pos) /*!< 0x00000001 */ -#define RCC_APB2ENR_AFIOEN RCC_APB2ENR_AFIOEN_Msk /*!< Alternate Function I/O clock enable */ -#define RCC_APB2ENR_IOPAEN_Pos (2U) -#define RCC_APB2ENR_IOPAEN_Msk (0x1U << RCC_APB2ENR_IOPAEN_Pos) /*!< 0x00000004 */ -#define RCC_APB2ENR_IOPAEN RCC_APB2ENR_IOPAEN_Msk /*!< I/O port A clock enable */ -#define RCC_APB2ENR_IOPBEN_Pos (3U) -#define RCC_APB2ENR_IOPBEN_Msk (0x1U << RCC_APB2ENR_IOPBEN_Pos) /*!< 0x00000008 */ -#define RCC_APB2ENR_IOPBEN RCC_APB2ENR_IOPBEN_Msk /*!< I/O port B clock enable */ -#define RCC_APB2ENR_IOPCEN_Pos (4U) -#define RCC_APB2ENR_IOPCEN_Msk (0x1U << RCC_APB2ENR_IOPCEN_Pos) /*!< 0x00000010 */ -#define RCC_APB2ENR_IOPCEN RCC_APB2ENR_IOPCEN_Msk /*!< I/O port C clock enable */ -#define RCC_APB2ENR_IOPDEN_Pos (5U) -#define RCC_APB2ENR_IOPDEN_Msk (0x1U << RCC_APB2ENR_IOPDEN_Pos) /*!< 0x00000020 */ -#define RCC_APB2ENR_IOPDEN RCC_APB2ENR_IOPDEN_Msk /*!< I/O port D clock enable */ -#define RCC_APB2ENR_ADC1EN_Pos (9U) -#define RCC_APB2ENR_ADC1EN_Msk (0x1U << RCC_APB2ENR_ADC1EN_Pos) /*!< 0x00000200 */ -#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADC1EN_Msk /*!< ADC 1 interface clock enable */ - -#define RCC_APB2ENR_ADC2EN_Pos (10U) -#define RCC_APB2ENR_ADC2EN_Msk (0x1U << RCC_APB2ENR_ADC2EN_Pos) /*!< 0x00000400 */ -#define RCC_APB2ENR_ADC2EN RCC_APB2ENR_ADC2EN_Msk /*!< ADC 2 interface clock enable */ - -#define RCC_APB2ENR_TIM1EN_Pos (11U) -#define RCC_APB2ENR_TIM1EN_Msk (0x1U << RCC_APB2ENR_TIM1EN_Pos) /*!< 0x00000800 */ -#define RCC_APB2ENR_TIM1EN RCC_APB2ENR_TIM1EN_Msk /*!< TIM1 Timer clock enable */ -#define RCC_APB2ENR_SPI1EN_Pos (12U) -#define RCC_APB2ENR_SPI1EN_Msk (0x1U << RCC_APB2ENR_SPI1EN_Pos) /*!< 0x00001000 */ -#define RCC_APB2ENR_SPI1EN RCC_APB2ENR_SPI1EN_Msk /*!< SPI 1 clock enable */ -#define RCC_APB2ENR_USART1EN_Pos (14U) -#define RCC_APB2ENR_USART1EN_Msk (0x1U << RCC_APB2ENR_USART1EN_Pos) /*!< 0x00004000 */ -#define RCC_APB2ENR_USART1EN RCC_APB2ENR_USART1EN_Msk /*!< USART1 clock enable */ - - - - - - -/***************** Bit definition for RCC_APB1ENR register ******************/ -#define RCC_APB1ENR_TIM2EN_Pos (0U) -#define RCC_APB1ENR_TIM2EN_Msk (0x1U << RCC_APB1ENR_TIM2EN_Pos) /*!< 0x00000001 */ -#define RCC_APB1ENR_TIM2EN RCC_APB1ENR_TIM2EN_Msk /*!< Timer 2 clock enabled*/ -#define RCC_APB1ENR_TIM3EN_Pos (1U) -#define RCC_APB1ENR_TIM3EN_Msk (0x1U << RCC_APB1ENR_TIM3EN_Pos) /*!< 0x00000002 */ -#define RCC_APB1ENR_TIM3EN RCC_APB1ENR_TIM3EN_Msk /*!< Timer 3 clock enable */ -#define RCC_APB1ENR_WWDGEN_Pos (11U) -#define RCC_APB1ENR_WWDGEN_Msk (0x1U << RCC_APB1ENR_WWDGEN_Pos) /*!< 0x00000800 */ -#define RCC_APB1ENR_WWDGEN RCC_APB1ENR_WWDGEN_Msk /*!< Window Watchdog clock enable */ -#define RCC_APB1ENR_USART2EN_Pos (17U) -#define RCC_APB1ENR_USART2EN_Msk (0x1U << RCC_APB1ENR_USART2EN_Pos) /*!< 0x00020000 */ -#define RCC_APB1ENR_USART2EN RCC_APB1ENR_USART2EN_Msk /*!< USART 2 clock enable */ -#define RCC_APB1ENR_I2C1EN_Pos (21U) -#define RCC_APB1ENR_I2C1EN_Msk (0x1U << RCC_APB1ENR_I2C1EN_Pos) /*!< 0x00200000 */ -#define RCC_APB1ENR_I2C1EN RCC_APB1ENR_I2C1EN_Msk /*!< I2C 1 clock enable */ - -#define RCC_APB1ENR_CAN1EN_Pos (25U) -#define RCC_APB1ENR_CAN1EN_Msk (0x1U << RCC_APB1ENR_CAN1EN_Pos) /*!< 0x02000000 */ -#define RCC_APB1ENR_CAN1EN RCC_APB1ENR_CAN1EN_Msk /*!< CAN1 clock enable */ - -#define RCC_APB1ENR_BKPEN_Pos (27U) -#define RCC_APB1ENR_BKPEN_Msk (0x1U << RCC_APB1ENR_BKPEN_Pos) /*!< 0x08000000 */ -#define RCC_APB1ENR_BKPEN RCC_APB1ENR_BKPEN_Msk /*!< Backup interface clock enable */ -#define RCC_APB1ENR_PWREN_Pos (28U) -#define RCC_APB1ENR_PWREN_Msk (0x1U << RCC_APB1ENR_PWREN_Pos) /*!< 0x10000000 */ -#define RCC_APB1ENR_PWREN RCC_APB1ENR_PWREN_Msk /*!< Power interface clock enable */ - - -#define RCC_APB1ENR_USBEN_Pos (23U) -#define RCC_APB1ENR_USBEN_Msk (0x1U << RCC_APB1ENR_USBEN_Pos) /*!< 0x00800000 */ -#define RCC_APB1ENR_USBEN RCC_APB1ENR_USBEN_Msk /*!< USB Device clock enable */ - - - - - - -/******************* Bit definition for RCC_BDCR register *******************/ -#define RCC_BDCR_LSEON_Pos (0U) -#define RCC_BDCR_LSEON_Msk (0x1U << RCC_BDCR_LSEON_Pos) /*!< 0x00000001 */ -#define RCC_BDCR_LSEON RCC_BDCR_LSEON_Msk /*!< External Low Speed oscillator enable */ -#define RCC_BDCR_LSERDY_Pos (1U) -#define RCC_BDCR_LSERDY_Msk (0x1U << RCC_BDCR_LSERDY_Pos) /*!< 0x00000002 */ -#define RCC_BDCR_LSERDY RCC_BDCR_LSERDY_Msk /*!< External Low Speed oscillator Ready */ -#define RCC_BDCR_LSEBYP_Pos (2U) -#define RCC_BDCR_LSEBYP_Msk (0x1U << RCC_BDCR_LSEBYP_Pos) /*!< 0x00000004 */ -#define RCC_BDCR_LSEBYP RCC_BDCR_LSEBYP_Msk /*!< External Low Speed oscillator Bypass */ - -#define RCC_BDCR_RTCSEL_Pos (8U) -#define RCC_BDCR_RTCSEL_Msk (0x3U << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000300 */ -#define RCC_BDCR_RTCSEL RCC_BDCR_RTCSEL_Msk /*!< RTCSEL[1:0] bits (RTC clock source selection) */ -#define RCC_BDCR_RTCSEL_0 (0x1U << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000100 */ -#define RCC_BDCR_RTCSEL_1 (0x2U << RCC_BDCR_RTCSEL_Pos) /*!< 0x00000200 */ - -/*!< RTC congiguration */ -#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ -#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */ -#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */ -#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */ - -#define RCC_BDCR_RTCEN_Pos (15U) -#define RCC_BDCR_RTCEN_Msk (0x1U << RCC_BDCR_RTCEN_Pos) /*!< 0x00008000 */ -#define RCC_BDCR_RTCEN RCC_BDCR_RTCEN_Msk /*!< RTC clock enable */ -#define RCC_BDCR_BDRST_Pos (16U) -#define RCC_BDCR_BDRST_Msk (0x1U << RCC_BDCR_BDRST_Pos) /*!< 0x00010000 */ -#define RCC_BDCR_BDRST RCC_BDCR_BDRST_Msk /*!< Backup domain software reset */ - -/******************* Bit definition for RCC_CSR register ********************/ -#define RCC_CSR_LSION_Pos (0U) -#define RCC_CSR_LSION_Msk (0x1U << RCC_CSR_LSION_Pos) /*!< 0x00000001 */ -#define RCC_CSR_LSION RCC_CSR_LSION_Msk /*!< Internal Low Speed oscillator enable */ -#define RCC_CSR_LSIRDY_Pos (1U) -#define RCC_CSR_LSIRDY_Msk (0x1U << RCC_CSR_LSIRDY_Pos) /*!< 0x00000002 */ -#define RCC_CSR_LSIRDY RCC_CSR_LSIRDY_Msk /*!< Internal Low Speed oscillator Ready */ -#define RCC_CSR_RMVF_Pos (24U) -#define RCC_CSR_RMVF_Msk (0x1U << RCC_CSR_RMVF_Pos) /*!< 0x01000000 */ -#define RCC_CSR_RMVF RCC_CSR_RMVF_Msk /*!< Remove reset flag */ -#define RCC_CSR_PINRSTF_Pos (26U) -#define RCC_CSR_PINRSTF_Msk (0x1U << RCC_CSR_PINRSTF_Pos) /*!< 0x04000000 */ -#define RCC_CSR_PINRSTF RCC_CSR_PINRSTF_Msk /*!< PIN reset flag */ -#define RCC_CSR_PORRSTF_Pos (27U) -#define RCC_CSR_PORRSTF_Msk (0x1U << RCC_CSR_PORRSTF_Pos) /*!< 0x08000000 */ -#define RCC_CSR_PORRSTF RCC_CSR_PORRSTF_Msk /*!< POR/PDR reset flag */ -#define RCC_CSR_SFTRSTF_Pos (28U) -#define RCC_CSR_SFTRSTF_Msk (0x1U << RCC_CSR_SFTRSTF_Pos) /*!< 0x10000000 */ -#define RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF_Msk /*!< Software Reset flag */ -#define RCC_CSR_IWDGRSTF_Pos (29U) -#define RCC_CSR_IWDGRSTF_Msk (0x1U << RCC_CSR_IWDGRSTF_Pos) /*!< 0x20000000 */ -#define RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF_Msk /*!< Independent Watchdog reset flag */ -#define RCC_CSR_WWDGRSTF_Pos (30U) -#define RCC_CSR_WWDGRSTF_Msk (0x1U << RCC_CSR_WWDGRSTF_Pos) /*!< 0x40000000 */ -#define RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF_Msk /*!< Window watchdog reset flag */ -#define RCC_CSR_LPWRRSTF_Pos (31U) -#define RCC_CSR_LPWRRSTF_Msk (0x1U << RCC_CSR_LPWRRSTF_Pos) /*!< 0x80000000 */ -#define RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF_Msk /*!< Low-Power reset flag */ - - - -/******************************************************************************/ -/* */ -/* General Purpose and Alternate Function I/O */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for GPIO_CRL register *******************/ -#define GPIO_CRL_MODE_Pos (0U) -#define GPIO_CRL_MODE_Msk (0x33333333U << GPIO_CRL_MODE_Pos) /*!< 0x33333333 */ -#define GPIO_CRL_MODE GPIO_CRL_MODE_Msk /*!< Port x mode bits */ - -#define GPIO_CRL_MODE0_Pos (0U) -#define GPIO_CRL_MODE0_Msk (0x3U << GPIO_CRL_MODE0_Pos) /*!< 0x00000003 */ -#define GPIO_CRL_MODE0 GPIO_CRL_MODE0_Msk /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ -#define GPIO_CRL_MODE0_0 (0x1U << GPIO_CRL_MODE0_Pos) /*!< 0x00000001 */ -#define GPIO_CRL_MODE0_1 (0x2U << GPIO_CRL_MODE0_Pos) /*!< 0x00000002 */ - -#define GPIO_CRL_MODE1_Pos (4U) -#define GPIO_CRL_MODE1_Msk (0x3U << GPIO_CRL_MODE1_Pos) /*!< 0x00000030 */ -#define GPIO_CRL_MODE1 GPIO_CRL_MODE1_Msk /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ -#define GPIO_CRL_MODE1_0 (0x1U << GPIO_CRL_MODE1_Pos) /*!< 0x00000010 */ -#define GPIO_CRL_MODE1_1 (0x2U << GPIO_CRL_MODE1_Pos) /*!< 0x00000020 */ - -#define GPIO_CRL_MODE2_Pos (8U) -#define GPIO_CRL_MODE2_Msk (0x3U << GPIO_CRL_MODE2_Pos) /*!< 0x00000300 */ -#define GPIO_CRL_MODE2 GPIO_CRL_MODE2_Msk /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ -#define GPIO_CRL_MODE2_0 (0x1U << GPIO_CRL_MODE2_Pos) /*!< 0x00000100 */ -#define GPIO_CRL_MODE2_1 (0x2U << GPIO_CRL_MODE2_Pos) /*!< 0x00000200 */ - -#define GPIO_CRL_MODE3_Pos (12U) -#define GPIO_CRL_MODE3_Msk (0x3U << GPIO_CRL_MODE3_Pos) /*!< 0x00003000 */ -#define GPIO_CRL_MODE3 GPIO_CRL_MODE3_Msk /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ -#define GPIO_CRL_MODE3_0 (0x1U << GPIO_CRL_MODE3_Pos) /*!< 0x00001000 */ -#define GPIO_CRL_MODE3_1 (0x2U << GPIO_CRL_MODE3_Pos) /*!< 0x00002000 */ - -#define GPIO_CRL_MODE4_Pos (16U) -#define GPIO_CRL_MODE4_Msk (0x3U << GPIO_CRL_MODE4_Pos) /*!< 0x00030000 */ -#define GPIO_CRL_MODE4 GPIO_CRL_MODE4_Msk /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ -#define GPIO_CRL_MODE4_0 (0x1U << GPIO_CRL_MODE4_Pos) /*!< 0x00010000 */ -#define GPIO_CRL_MODE4_1 (0x2U << GPIO_CRL_MODE4_Pos) /*!< 0x00020000 */ - -#define GPIO_CRL_MODE5_Pos (20U) -#define GPIO_CRL_MODE5_Msk (0x3U << GPIO_CRL_MODE5_Pos) /*!< 0x00300000 */ -#define GPIO_CRL_MODE5 GPIO_CRL_MODE5_Msk /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ -#define GPIO_CRL_MODE5_0 (0x1U << GPIO_CRL_MODE5_Pos) /*!< 0x00100000 */ -#define GPIO_CRL_MODE5_1 (0x2U << GPIO_CRL_MODE5_Pos) /*!< 0x00200000 */ - -#define GPIO_CRL_MODE6_Pos (24U) -#define GPIO_CRL_MODE6_Msk (0x3U << GPIO_CRL_MODE6_Pos) /*!< 0x03000000 */ -#define GPIO_CRL_MODE6 GPIO_CRL_MODE6_Msk /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ -#define GPIO_CRL_MODE6_0 (0x1U << GPIO_CRL_MODE6_Pos) /*!< 0x01000000 */ -#define GPIO_CRL_MODE6_1 (0x2U << GPIO_CRL_MODE6_Pos) /*!< 0x02000000 */ - -#define GPIO_CRL_MODE7_Pos (28U) -#define GPIO_CRL_MODE7_Msk (0x3U << GPIO_CRL_MODE7_Pos) /*!< 0x30000000 */ -#define GPIO_CRL_MODE7 GPIO_CRL_MODE7_Msk /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ -#define GPIO_CRL_MODE7_0 (0x1U << GPIO_CRL_MODE7_Pos) /*!< 0x10000000 */ -#define GPIO_CRL_MODE7_1 (0x2U << GPIO_CRL_MODE7_Pos) /*!< 0x20000000 */ - -#define GPIO_CRL_CNF_Pos (2U) -#define GPIO_CRL_CNF_Msk (0x33333333U << GPIO_CRL_CNF_Pos) /*!< 0xCCCCCCCC */ -#define GPIO_CRL_CNF GPIO_CRL_CNF_Msk /*!< Port x configuration bits */ - -#define GPIO_CRL_CNF0_Pos (2U) -#define GPIO_CRL_CNF0_Msk (0x3U << GPIO_CRL_CNF0_Pos) /*!< 0x0000000C */ -#define GPIO_CRL_CNF0 GPIO_CRL_CNF0_Msk /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ -#define GPIO_CRL_CNF0_0 (0x1U << GPIO_CRL_CNF0_Pos) /*!< 0x00000004 */ -#define GPIO_CRL_CNF0_1 (0x2U << GPIO_CRL_CNF0_Pos) /*!< 0x00000008 */ - -#define GPIO_CRL_CNF1_Pos (6U) -#define GPIO_CRL_CNF1_Msk (0x3U << GPIO_CRL_CNF1_Pos) /*!< 0x000000C0 */ -#define GPIO_CRL_CNF1 GPIO_CRL_CNF1_Msk /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ -#define GPIO_CRL_CNF1_0 (0x1U << GPIO_CRL_CNF1_Pos) /*!< 0x00000040 */ -#define GPIO_CRL_CNF1_1 (0x2U << GPIO_CRL_CNF1_Pos) /*!< 0x00000080 */ - -#define GPIO_CRL_CNF2_Pos (10U) -#define GPIO_CRL_CNF2_Msk (0x3U << GPIO_CRL_CNF2_Pos) /*!< 0x00000C00 */ -#define GPIO_CRL_CNF2 GPIO_CRL_CNF2_Msk /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ -#define GPIO_CRL_CNF2_0 (0x1U << GPIO_CRL_CNF2_Pos) /*!< 0x00000400 */ -#define GPIO_CRL_CNF2_1 (0x2U << GPIO_CRL_CNF2_Pos) /*!< 0x00000800 */ - -#define GPIO_CRL_CNF3_Pos (14U) -#define GPIO_CRL_CNF3_Msk (0x3U << GPIO_CRL_CNF3_Pos) /*!< 0x0000C000 */ -#define GPIO_CRL_CNF3 GPIO_CRL_CNF3_Msk /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ -#define GPIO_CRL_CNF3_0 (0x1U << GPIO_CRL_CNF3_Pos) /*!< 0x00004000 */ -#define GPIO_CRL_CNF3_1 (0x2U << GPIO_CRL_CNF3_Pos) /*!< 0x00008000 */ - -#define GPIO_CRL_CNF4_Pos (18U) -#define GPIO_CRL_CNF4_Msk (0x3U << GPIO_CRL_CNF4_Pos) /*!< 0x000C0000 */ -#define GPIO_CRL_CNF4 GPIO_CRL_CNF4_Msk /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ -#define GPIO_CRL_CNF4_0 (0x1U << GPIO_CRL_CNF4_Pos) /*!< 0x00040000 */ -#define GPIO_CRL_CNF4_1 (0x2U << GPIO_CRL_CNF4_Pos) /*!< 0x00080000 */ - -#define GPIO_CRL_CNF5_Pos (22U) -#define GPIO_CRL_CNF5_Msk (0x3U << GPIO_CRL_CNF5_Pos) /*!< 0x00C00000 */ -#define GPIO_CRL_CNF5 GPIO_CRL_CNF5_Msk /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ -#define GPIO_CRL_CNF5_0 (0x1U << GPIO_CRL_CNF5_Pos) /*!< 0x00400000 */ -#define GPIO_CRL_CNF5_1 (0x2U << GPIO_CRL_CNF5_Pos) /*!< 0x00800000 */ - -#define GPIO_CRL_CNF6_Pos (26U) -#define GPIO_CRL_CNF6_Msk (0x3U << GPIO_CRL_CNF6_Pos) /*!< 0x0C000000 */ -#define GPIO_CRL_CNF6 GPIO_CRL_CNF6_Msk /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ -#define GPIO_CRL_CNF6_0 (0x1U << GPIO_CRL_CNF6_Pos) /*!< 0x04000000 */ -#define GPIO_CRL_CNF6_1 (0x2U << GPIO_CRL_CNF6_Pos) /*!< 0x08000000 */ - -#define GPIO_CRL_CNF7_Pos (30U) -#define GPIO_CRL_CNF7_Msk (0x3U << GPIO_CRL_CNF7_Pos) /*!< 0xC0000000 */ -#define GPIO_CRL_CNF7 GPIO_CRL_CNF7_Msk /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ -#define GPIO_CRL_CNF7_0 (0x1U << GPIO_CRL_CNF7_Pos) /*!< 0x40000000 */ -#define GPIO_CRL_CNF7_1 (0x2U << GPIO_CRL_CNF7_Pos) /*!< 0x80000000 */ - -/******************* Bit definition for GPIO_CRH register *******************/ -#define GPIO_CRH_MODE_Pos (0U) -#define GPIO_CRH_MODE_Msk (0x33333333U << GPIO_CRH_MODE_Pos) /*!< 0x33333333 */ -#define GPIO_CRH_MODE GPIO_CRH_MODE_Msk /*!< Port x mode bits */ - -#define GPIO_CRH_MODE8_Pos (0U) -#define GPIO_CRH_MODE8_Msk (0x3U << GPIO_CRH_MODE8_Pos) /*!< 0x00000003 */ -#define GPIO_CRH_MODE8 GPIO_CRH_MODE8_Msk /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ -#define GPIO_CRH_MODE8_0 (0x1U << GPIO_CRH_MODE8_Pos) /*!< 0x00000001 */ -#define GPIO_CRH_MODE8_1 (0x2U << GPIO_CRH_MODE8_Pos) /*!< 0x00000002 */ - -#define GPIO_CRH_MODE9_Pos (4U) -#define GPIO_CRH_MODE9_Msk (0x3U << GPIO_CRH_MODE9_Pos) /*!< 0x00000030 */ -#define GPIO_CRH_MODE9 GPIO_CRH_MODE9_Msk /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ -#define GPIO_CRH_MODE9_0 (0x1U << GPIO_CRH_MODE9_Pos) /*!< 0x00000010 */ -#define GPIO_CRH_MODE9_1 (0x2U << GPIO_CRH_MODE9_Pos) /*!< 0x00000020 */ - -#define GPIO_CRH_MODE10_Pos (8U) -#define GPIO_CRH_MODE10_Msk (0x3U << GPIO_CRH_MODE10_Pos) /*!< 0x00000300 */ -#define GPIO_CRH_MODE10 GPIO_CRH_MODE10_Msk /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ -#define GPIO_CRH_MODE10_0 (0x1U << GPIO_CRH_MODE10_Pos) /*!< 0x00000100 */ -#define GPIO_CRH_MODE10_1 (0x2U << GPIO_CRH_MODE10_Pos) /*!< 0x00000200 */ - -#define GPIO_CRH_MODE11_Pos (12U) -#define GPIO_CRH_MODE11_Msk (0x3U << GPIO_CRH_MODE11_Pos) /*!< 0x00003000 */ -#define GPIO_CRH_MODE11 GPIO_CRH_MODE11_Msk /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ -#define GPIO_CRH_MODE11_0 (0x1U << GPIO_CRH_MODE11_Pos) /*!< 0x00001000 */ -#define GPIO_CRH_MODE11_1 (0x2U << GPIO_CRH_MODE11_Pos) /*!< 0x00002000 */ - -#define GPIO_CRH_MODE12_Pos (16U) -#define GPIO_CRH_MODE12_Msk (0x3U << GPIO_CRH_MODE12_Pos) /*!< 0x00030000 */ -#define GPIO_CRH_MODE12 GPIO_CRH_MODE12_Msk /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ -#define GPIO_CRH_MODE12_0 (0x1U << GPIO_CRH_MODE12_Pos) /*!< 0x00010000 */ -#define GPIO_CRH_MODE12_1 (0x2U << GPIO_CRH_MODE12_Pos) /*!< 0x00020000 */ - -#define GPIO_CRH_MODE13_Pos (20U) -#define GPIO_CRH_MODE13_Msk (0x3U << GPIO_CRH_MODE13_Pos) /*!< 0x00300000 */ -#define GPIO_CRH_MODE13 GPIO_CRH_MODE13_Msk /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ -#define GPIO_CRH_MODE13_0 (0x1U << GPIO_CRH_MODE13_Pos) /*!< 0x00100000 */ -#define GPIO_CRH_MODE13_1 (0x2U << GPIO_CRH_MODE13_Pos) /*!< 0x00200000 */ - -#define GPIO_CRH_MODE14_Pos (24U) -#define GPIO_CRH_MODE14_Msk (0x3U << GPIO_CRH_MODE14_Pos) /*!< 0x03000000 */ -#define GPIO_CRH_MODE14 GPIO_CRH_MODE14_Msk /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ -#define GPIO_CRH_MODE14_0 (0x1U << GPIO_CRH_MODE14_Pos) /*!< 0x01000000 */ -#define GPIO_CRH_MODE14_1 (0x2U << GPIO_CRH_MODE14_Pos) /*!< 0x02000000 */ - -#define GPIO_CRH_MODE15_Pos (28U) -#define GPIO_CRH_MODE15_Msk (0x3U << GPIO_CRH_MODE15_Pos) /*!< 0x30000000 */ -#define GPIO_CRH_MODE15 GPIO_CRH_MODE15_Msk /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ -#define GPIO_CRH_MODE15_0 (0x1U << GPIO_CRH_MODE15_Pos) /*!< 0x10000000 */ -#define GPIO_CRH_MODE15_1 (0x2U << GPIO_CRH_MODE15_Pos) /*!< 0x20000000 */ - -#define GPIO_CRH_CNF_Pos (2U) -#define GPIO_CRH_CNF_Msk (0x33333333U << GPIO_CRH_CNF_Pos) /*!< 0xCCCCCCCC */ -#define GPIO_CRH_CNF GPIO_CRH_CNF_Msk /*!< Port x configuration bits */ - -#define GPIO_CRH_CNF8_Pos (2U) -#define GPIO_CRH_CNF8_Msk (0x3U << GPIO_CRH_CNF8_Pos) /*!< 0x0000000C */ -#define GPIO_CRH_CNF8 GPIO_CRH_CNF8_Msk /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ -#define GPIO_CRH_CNF8_0 (0x1U << GPIO_CRH_CNF8_Pos) /*!< 0x00000004 */ -#define GPIO_CRH_CNF8_1 (0x2U << GPIO_CRH_CNF8_Pos) /*!< 0x00000008 */ - -#define GPIO_CRH_CNF9_Pos (6U) -#define GPIO_CRH_CNF9_Msk (0x3U << GPIO_CRH_CNF9_Pos) /*!< 0x000000C0 */ -#define GPIO_CRH_CNF9 GPIO_CRH_CNF9_Msk /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ -#define GPIO_CRH_CNF9_0 (0x1U << GPIO_CRH_CNF9_Pos) /*!< 0x00000040 */ -#define GPIO_CRH_CNF9_1 (0x2U << GPIO_CRH_CNF9_Pos) /*!< 0x00000080 */ - -#define GPIO_CRH_CNF10_Pos (10U) -#define GPIO_CRH_CNF10_Msk (0x3U << GPIO_CRH_CNF10_Pos) /*!< 0x00000C00 */ -#define GPIO_CRH_CNF10 GPIO_CRH_CNF10_Msk /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ -#define GPIO_CRH_CNF10_0 (0x1U << GPIO_CRH_CNF10_Pos) /*!< 0x00000400 */ -#define GPIO_CRH_CNF10_1 (0x2U << GPIO_CRH_CNF10_Pos) /*!< 0x00000800 */ - -#define GPIO_CRH_CNF11_Pos (14U) -#define GPIO_CRH_CNF11_Msk (0x3U << GPIO_CRH_CNF11_Pos) /*!< 0x0000C000 */ -#define GPIO_CRH_CNF11 GPIO_CRH_CNF11_Msk /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ -#define GPIO_CRH_CNF11_0 (0x1U << GPIO_CRH_CNF11_Pos) /*!< 0x00004000 */ -#define GPIO_CRH_CNF11_1 (0x2U << GPIO_CRH_CNF11_Pos) /*!< 0x00008000 */ - -#define GPIO_CRH_CNF12_Pos (18U) -#define GPIO_CRH_CNF12_Msk (0x3U << GPIO_CRH_CNF12_Pos) /*!< 0x000C0000 */ -#define GPIO_CRH_CNF12 GPIO_CRH_CNF12_Msk /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ -#define GPIO_CRH_CNF12_0 (0x1U << GPIO_CRH_CNF12_Pos) /*!< 0x00040000 */ -#define GPIO_CRH_CNF12_1 (0x2U << GPIO_CRH_CNF12_Pos) /*!< 0x00080000 */ - -#define GPIO_CRH_CNF13_Pos (22U) -#define GPIO_CRH_CNF13_Msk (0x3U << GPIO_CRH_CNF13_Pos) /*!< 0x00C00000 */ -#define GPIO_CRH_CNF13 GPIO_CRH_CNF13_Msk /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ -#define GPIO_CRH_CNF13_0 (0x1U << GPIO_CRH_CNF13_Pos) /*!< 0x00400000 */ -#define GPIO_CRH_CNF13_1 (0x2U << GPIO_CRH_CNF13_Pos) /*!< 0x00800000 */ - -#define GPIO_CRH_CNF14_Pos (26U) -#define GPIO_CRH_CNF14_Msk (0x3U << GPIO_CRH_CNF14_Pos) /*!< 0x0C000000 */ -#define GPIO_CRH_CNF14 GPIO_CRH_CNF14_Msk /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ -#define GPIO_CRH_CNF14_0 (0x1U << GPIO_CRH_CNF14_Pos) /*!< 0x04000000 */ -#define GPIO_CRH_CNF14_1 (0x2U << GPIO_CRH_CNF14_Pos) /*!< 0x08000000 */ - -#define GPIO_CRH_CNF15_Pos (30U) -#define GPIO_CRH_CNF15_Msk (0x3U << GPIO_CRH_CNF15_Pos) /*!< 0xC0000000 */ -#define GPIO_CRH_CNF15 GPIO_CRH_CNF15_Msk /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ -#define GPIO_CRH_CNF15_0 (0x1U << GPIO_CRH_CNF15_Pos) /*!< 0x40000000 */ -#define GPIO_CRH_CNF15_1 (0x2U << GPIO_CRH_CNF15_Pos) /*!< 0x80000000 */ - -/*!<****************** Bit definition for GPIO_IDR register *******************/ -#define GPIO_IDR_IDR0_Pos (0U) -#define GPIO_IDR_IDR0_Msk (0x1U << GPIO_IDR_IDR0_Pos) /*!< 0x00000001 */ -#define GPIO_IDR_IDR0 GPIO_IDR_IDR0_Msk /*!< Port input data, bit 0 */ -#define GPIO_IDR_IDR1_Pos (1U) -#define GPIO_IDR_IDR1_Msk (0x1U << GPIO_IDR_IDR1_Pos) /*!< 0x00000002 */ -#define GPIO_IDR_IDR1 GPIO_IDR_IDR1_Msk /*!< Port input data, bit 1 */ -#define GPIO_IDR_IDR2_Pos (2U) -#define GPIO_IDR_IDR2_Msk (0x1U << GPIO_IDR_IDR2_Pos) /*!< 0x00000004 */ -#define GPIO_IDR_IDR2 GPIO_IDR_IDR2_Msk /*!< Port input data, bit 2 */ -#define GPIO_IDR_IDR3_Pos (3U) -#define GPIO_IDR_IDR3_Msk (0x1U << GPIO_IDR_IDR3_Pos) /*!< 0x00000008 */ -#define GPIO_IDR_IDR3 GPIO_IDR_IDR3_Msk /*!< Port input data, bit 3 */ -#define GPIO_IDR_IDR4_Pos (4U) -#define GPIO_IDR_IDR4_Msk (0x1U << GPIO_IDR_IDR4_Pos) /*!< 0x00000010 */ -#define GPIO_IDR_IDR4 GPIO_IDR_IDR4_Msk /*!< Port input data, bit 4 */ -#define GPIO_IDR_IDR5_Pos (5U) -#define GPIO_IDR_IDR5_Msk (0x1U << GPIO_IDR_IDR5_Pos) /*!< 0x00000020 */ -#define GPIO_IDR_IDR5 GPIO_IDR_IDR5_Msk /*!< Port input data, bit 5 */ -#define GPIO_IDR_IDR6_Pos (6U) -#define GPIO_IDR_IDR6_Msk (0x1U << GPIO_IDR_IDR6_Pos) /*!< 0x00000040 */ -#define GPIO_IDR_IDR6 GPIO_IDR_IDR6_Msk /*!< Port input data, bit 6 */ -#define GPIO_IDR_IDR7_Pos (7U) -#define GPIO_IDR_IDR7_Msk (0x1U << GPIO_IDR_IDR7_Pos) /*!< 0x00000080 */ -#define GPIO_IDR_IDR7 GPIO_IDR_IDR7_Msk /*!< Port input data, bit 7 */ -#define GPIO_IDR_IDR8_Pos (8U) -#define GPIO_IDR_IDR8_Msk (0x1U << GPIO_IDR_IDR8_Pos) /*!< 0x00000100 */ -#define GPIO_IDR_IDR8 GPIO_IDR_IDR8_Msk /*!< Port input data, bit 8 */ -#define GPIO_IDR_IDR9_Pos (9U) -#define GPIO_IDR_IDR9_Msk (0x1U << GPIO_IDR_IDR9_Pos) /*!< 0x00000200 */ -#define GPIO_IDR_IDR9 GPIO_IDR_IDR9_Msk /*!< Port input data, bit 9 */ -#define GPIO_IDR_IDR10_Pos (10U) -#define GPIO_IDR_IDR10_Msk (0x1U << GPIO_IDR_IDR10_Pos) /*!< 0x00000400 */ -#define GPIO_IDR_IDR10 GPIO_IDR_IDR10_Msk /*!< Port input data, bit 10 */ -#define GPIO_IDR_IDR11_Pos (11U) -#define GPIO_IDR_IDR11_Msk (0x1U << GPIO_IDR_IDR11_Pos) /*!< 0x00000800 */ -#define GPIO_IDR_IDR11 GPIO_IDR_IDR11_Msk /*!< Port input data, bit 11 */ -#define GPIO_IDR_IDR12_Pos (12U) -#define GPIO_IDR_IDR12_Msk (0x1U << GPIO_IDR_IDR12_Pos) /*!< 0x00001000 */ -#define GPIO_IDR_IDR12 GPIO_IDR_IDR12_Msk /*!< Port input data, bit 12 */ -#define GPIO_IDR_IDR13_Pos (13U) -#define GPIO_IDR_IDR13_Msk (0x1U << GPIO_IDR_IDR13_Pos) /*!< 0x00002000 */ -#define GPIO_IDR_IDR13 GPIO_IDR_IDR13_Msk /*!< Port input data, bit 13 */ -#define GPIO_IDR_IDR14_Pos (14U) -#define GPIO_IDR_IDR14_Msk (0x1U << GPIO_IDR_IDR14_Pos) /*!< 0x00004000 */ -#define GPIO_IDR_IDR14 GPIO_IDR_IDR14_Msk /*!< Port input data, bit 14 */ -#define GPIO_IDR_IDR15_Pos (15U) -#define GPIO_IDR_IDR15_Msk (0x1U << GPIO_IDR_IDR15_Pos) /*!< 0x00008000 */ -#define GPIO_IDR_IDR15 GPIO_IDR_IDR15_Msk /*!< Port input data, bit 15 */ - -/******************* Bit definition for GPIO_ODR register *******************/ -#define GPIO_ODR_ODR0_Pos (0U) -#define GPIO_ODR_ODR0_Msk (0x1U << GPIO_ODR_ODR0_Pos) /*!< 0x00000001 */ -#define GPIO_ODR_ODR0 GPIO_ODR_ODR0_Msk /*!< Port output data, bit 0 */ -#define GPIO_ODR_ODR1_Pos (1U) -#define GPIO_ODR_ODR1_Msk (0x1U << GPIO_ODR_ODR1_Pos) /*!< 0x00000002 */ -#define GPIO_ODR_ODR1 GPIO_ODR_ODR1_Msk /*!< Port output data, bit 1 */ -#define GPIO_ODR_ODR2_Pos (2U) -#define GPIO_ODR_ODR2_Msk (0x1U << GPIO_ODR_ODR2_Pos) /*!< 0x00000004 */ -#define GPIO_ODR_ODR2 GPIO_ODR_ODR2_Msk /*!< Port output data, bit 2 */ -#define GPIO_ODR_ODR3_Pos (3U) -#define GPIO_ODR_ODR3_Msk (0x1U << GPIO_ODR_ODR3_Pos) /*!< 0x00000008 */ -#define GPIO_ODR_ODR3 GPIO_ODR_ODR3_Msk /*!< Port output data, bit 3 */ -#define GPIO_ODR_ODR4_Pos (4U) -#define GPIO_ODR_ODR4_Msk (0x1U << GPIO_ODR_ODR4_Pos) /*!< 0x00000010 */ -#define GPIO_ODR_ODR4 GPIO_ODR_ODR4_Msk /*!< Port output data, bit 4 */ -#define GPIO_ODR_ODR5_Pos (5U) -#define GPIO_ODR_ODR5_Msk (0x1U << GPIO_ODR_ODR5_Pos) /*!< 0x00000020 */ -#define GPIO_ODR_ODR5 GPIO_ODR_ODR5_Msk /*!< Port output data, bit 5 */ -#define GPIO_ODR_ODR6_Pos (6U) -#define GPIO_ODR_ODR6_Msk (0x1U << GPIO_ODR_ODR6_Pos) /*!< 0x00000040 */ -#define GPIO_ODR_ODR6 GPIO_ODR_ODR6_Msk /*!< Port output data, bit 6 */ -#define GPIO_ODR_ODR7_Pos (7U) -#define GPIO_ODR_ODR7_Msk (0x1U << GPIO_ODR_ODR7_Pos) /*!< 0x00000080 */ -#define GPIO_ODR_ODR7 GPIO_ODR_ODR7_Msk /*!< Port output data, bit 7 */ -#define GPIO_ODR_ODR8_Pos (8U) -#define GPIO_ODR_ODR8_Msk (0x1U << GPIO_ODR_ODR8_Pos) /*!< 0x00000100 */ -#define GPIO_ODR_ODR8 GPIO_ODR_ODR8_Msk /*!< Port output data, bit 8 */ -#define GPIO_ODR_ODR9_Pos (9U) -#define GPIO_ODR_ODR9_Msk (0x1U << GPIO_ODR_ODR9_Pos) /*!< 0x00000200 */ -#define GPIO_ODR_ODR9 GPIO_ODR_ODR9_Msk /*!< Port output data, bit 9 */ -#define GPIO_ODR_ODR10_Pos (10U) -#define GPIO_ODR_ODR10_Msk (0x1U << GPIO_ODR_ODR10_Pos) /*!< 0x00000400 */ -#define GPIO_ODR_ODR10 GPIO_ODR_ODR10_Msk /*!< Port output data, bit 10 */ -#define GPIO_ODR_ODR11_Pos (11U) -#define GPIO_ODR_ODR11_Msk (0x1U << GPIO_ODR_ODR11_Pos) /*!< 0x00000800 */ -#define GPIO_ODR_ODR11 GPIO_ODR_ODR11_Msk /*!< Port output data, bit 11 */ -#define GPIO_ODR_ODR12_Pos (12U) -#define GPIO_ODR_ODR12_Msk (0x1U << GPIO_ODR_ODR12_Pos) /*!< 0x00001000 */ -#define GPIO_ODR_ODR12 GPIO_ODR_ODR12_Msk /*!< Port output data, bit 12 */ -#define GPIO_ODR_ODR13_Pos (13U) -#define GPIO_ODR_ODR13_Msk (0x1U << GPIO_ODR_ODR13_Pos) /*!< 0x00002000 */ -#define GPIO_ODR_ODR13 GPIO_ODR_ODR13_Msk /*!< Port output data, bit 13 */ -#define GPIO_ODR_ODR14_Pos (14U) -#define GPIO_ODR_ODR14_Msk (0x1U << GPIO_ODR_ODR14_Pos) /*!< 0x00004000 */ -#define GPIO_ODR_ODR14 GPIO_ODR_ODR14_Msk /*!< Port output data, bit 14 */ -#define GPIO_ODR_ODR15_Pos (15U) -#define GPIO_ODR_ODR15_Msk (0x1U << GPIO_ODR_ODR15_Pos) /*!< 0x00008000 */ -#define GPIO_ODR_ODR15 GPIO_ODR_ODR15_Msk /*!< Port output data, bit 15 */ - -/****************** Bit definition for GPIO_BSRR register *******************/ -#define GPIO_BSRR_BS0_Pos (0U) -#define GPIO_BSRR_BS0_Msk (0x1U << GPIO_BSRR_BS0_Pos) /*!< 0x00000001 */ -#define GPIO_BSRR_BS0 GPIO_BSRR_BS0_Msk /*!< Port x Set bit 0 */ -#define GPIO_BSRR_BS1_Pos (1U) -#define GPIO_BSRR_BS1_Msk (0x1U << GPIO_BSRR_BS1_Pos) /*!< 0x00000002 */ -#define GPIO_BSRR_BS1 GPIO_BSRR_BS1_Msk /*!< Port x Set bit 1 */ -#define GPIO_BSRR_BS2_Pos (2U) -#define GPIO_BSRR_BS2_Msk (0x1U << GPIO_BSRR_BS2_Pos) /*!< 0x00000004 */ -#define GPIO_BSRR_BS2 GPIO_BSRR_BS2_Msk /*!< Port x Set bit 2 */ -#define GPIO_BSRR_BS3_Pos (3U) -#define GPIO_BSRR_BS3_Msk (0x1U << GPIO_BSRR_BS3_Pos) /*!< 0x00000008 */ -#define GPIO_BSRR_BS3 GPIO_BSRR_BS3_Msk /*!< Port x Set bit 3 */ -#define GPIO_BSRR_BS4_Pos (4U) -#define GPIO_BSRR_BS4_Msk (0x1U << GPIO_BSRR_BS4_Pos) /*!< 0x00000010 */ -#define GPIO_BSRR_BS4 GPIO_BSRR_BS4_Msk /*!< Port x Set bit 4 */ -#define GPIO_BSRR_BS5_Pos (5U) -#define GPIO_BSRR_BS5_Msk (0x1U << GPIO_BSRR_BS5_Pos) /*!< 0x00000020 */ -#define GPIO_BSRR_BS5 GPIO_BSRR_BS5_Msk /*!< Port x Set bit 5 */ -#define GPIO_BSRR_BS6_Pos (6U) -#define GPIO_BSRR_BS6_Msk (0x1U << GPIO_BSRR_BS6_Pos) /*!< 0x00000040 */ -#define GPIO_BSRR_BS6 GPIO_BSRR_BS6_Msk /*!< Port x Set bit 6 */ -#define GPIO_BSRR_BS7_Pos (7U) -#define GPIO_BSRR_BS7_Msk (0x1U << GPIO_BSRR_BS7_Pos) /*!< 0x00000080 */ -#define GPIO_BSRR_BS7 GPIO_BSRR_BS7_Msk /*!< Port x Set bit 7 */ -#define GPIO_BSRR_BS8_Pos (8U) -#define GPIO_BSRR_BS8_Msk (0x1U << GPIO_BSRR_BS8_Pos) /*!< 0x00000100 */ -#define GPIO_BSRR_BS8 GPIO_BSRR_BS8_Msk /*!< Port x Set bit 8 */ -#define GPIO_BSRR_BS9_Pos (9U) -#define GPIO_BSRR_BS9_Msk (0x1U << GPIO_BSRR_BS9_Pos) /*!< 0x00000200 */ -#define GPIO_BSRR_BS9 GPIO_BSRR_BS9_Msk /*!< Port x Set bit 9 */ -#define GPIO_BSRR_BS10_Pos (10U) -#define GPIO_BSRR_BS10_Msk (0x1U << GPIO_BSRR_BS10_Pos) /*!< 0x00000400 */ -#define GPIO_BSRR_BS10 GPIO_BSRR_BS10_Msk /*!< Port x Set bit 10 */ -#define GPIO_BSRR_BS11_Pos (11U) -#define GPIO_BSRR_BS11_Msk (0x1U << GPIO_BSRR_BS11_Pos) /*!< 0x00000800 */ -#define GPIO_BSRR_BS11 GPIO_BSRR_BS11_Msk /*!< Port x Set bit 11 */ -#define GPIO_BSRR_BS12_Pos (12U) -#define GPIO_BSRR_BS12_Msk (0x1U << GPIO_BSRR_BS12_Pos) /*!< 0x00001000 */ -#define GPIO_BSRR_BS12 GPIO_BSRR_BS12_Msk /*!< Port x Set bit 12 */ -#define GPIO_BSRR_BS13_Pos (13U) -#define GPIO_BSRR_BS13_Msk (0x1U << GPIO_BSRR_BS13_Pos) /*!< 0x00002000 */ -#define GPIO_BSRR_BS13 GPIO_BSRR_BS13_Msk /*!< Port x Set bit 13 */ -#define GPIO_BSRR_BS14_Pos (14U) -#define GPIO_BSRR_BS14_Msk (0x1U << GPIO_BSRR_BS14_Pos) /*!< 0x00004000 */ -#define GPIO_BSRR_BS14 GPIO_BSRR_BS14_Msk /*!< Port x Set bit 14 */ -#define GPIO_BSRR_BS15_Pos (15U) -#define GPIO_BSRR_BS15_Msk (0x1U << GPIO_BSRR_BS15_Pos) /*!< 0x00008000 */ -#define GPIO_BSRR_BS15 GPIO_BSRR_BS15_Msk /*!< Port x Set bit 15 */ - -#define GPIO_BSRR_BR0_Pos (16U) -#define GPIO_BSRR_BR0_Msk (0x1U << GPIO_BSRR_BR0_Pos) /*!< 0x00010000 */ -#define GPIO_BSRR_BR0 GPIO_BSRR_BR0_Msk /*!< Port x Reset bit 0 */ -#define GPIO_BSRR_BR1_Pos (17U) -#define GPIO_BSRR_BR1_Msk (0x1U << GPIO_BSRR_BR1_Pos) /*!< 0x00020000 */ -#define GPIO_BSRR_BR1 GPIO_BSRR_BR1_Msk /*!< Port x Reset bit 1 */ -#define GPIO_BSRR_BR2_Pos (18U) -#define GPIO_BSRR_BR2_Msk (0x1U << GPIO_BSRR_BR2_Pos) /*!< 0x00040000 */ -#define GPIO_BSRR_BR2 GPIO_BSRR_BR2_Msk /*!< Port x Reset bit 2 */ -#define GPIO_BSRR_BR3_Pos (19U) -#define GPIO_BSRR_BR3_Msk (0x1U << GPIO_BSRR_BR3_Pos) /*!< 0x00080000 */ -#define GPIO_BSRR_BR3 GPIO_BSRR_BR3_Msk /*!< Port x Reset bit 3 */ -#define GPIO_BSRR_BR4_Pos (20U) -#define GPIO_BSRR_BR4_Msk (0x1U << GPIO_BSRR_BR4_Pos) /*!< 0x00100000 */ -#define GPIO_BSRR_BR4 GPIO_BSRR_BR4_Msk /*!< Port x Reset bit 4 */ -#define GPIO_BSRR_BR5_Pos (21U) -#define GPIO_BSRR_BR5_Msk (0x1U << GPIO_BSRR_BR5_Pos) /*!< 0x00200000 */ -#define GPIO_BSRR_BR5 GPIO_BSRR_BR5_Msk /*!< Port x Reset bit 5 */ -#define GPIO_BSRR_BR6_Pos (22U) -#define GPIO_BSRR_BR6_Msk (0x1U << GPIO_BSRR_BR6_Pos) /*!< 0x00400000 */ -#define GPIO_BSRR_BR6 GPIO_BSRR_BR6_Msk /*!< Port x Reset bit 6 */ -#define GPIO_BSRR_BR7_Pos (23U) -#define GPIO_BSRR_BR7_Msk (0x1U << GPIO_BSRR_BR7_Pos) /*!< 0x00800000 */ -#define GPIO_BSRR_BR7 GPIO_BSRR_BR7_Msk /*!< Port x Reset bit 7 */ -#define GPIO_BSRR_BR8_Pos (24U) -#define GPIO_BSRR_BR8_Msk (0x1U << GPIO_BSRR_BR8_Pos) /*!< 0x01000000 */ -#define GPIO_BSRR_BR8 GPIO_BSRR_BR8_Msk /*!< Port x Reset bit 8 */ -#define GPIO_BSRR_BR9_Pos (25U) -#define GPIO_BSRR_BR9_Msk (0x1U << GPIO_BSRR_BR9_Pos) /*!< 0x02000000 */ -#define GPIO_BSRR_BR9 GPIO_BSRR_BR9_Msk /*!< Port x Reset bit 9 */ -#define GPIO_BSRR_BR10_Pos (26U) -#define GPIO_BSRR_BR10_Msk (0x1U << GPIO_BSRR_BR10_Pos) /*!< 0x04000000 */ -#define GPIO_BSRR_BR10 GPIO_BSRR_BR10_Msk /*!< Port x Reset bit 10 */ -#define GPIO_BSRR_BR11_Pos (27U) -#define GPIO_BSRR_BR11_Msk (0x1U << GPIO_BSRR_BR11_Pos) /*!< 0x08000000 */ -#define GPIO_BSRR_BR11 GPIO_BSRR_BR11_Msk /*!< Port x Reset bit 11 */ -#define GPIO_BSRR_BR12_Pos (28U) -#define GPIO_BSRR_BR12_Msk (0x1U << GPIO_BSRR_BR12_Pos) /*!< 0x10000000 */ -#define GPIO_BSRR_BR12 GPIO_BSRR_BR12_Msk /*!< Port x Reset bit 12 */ -#define GPIO_BSRR_BR13_Pos (29U) -#define GPIO_BSRR_BR13_Msk (0x1U << GPIO_BSRR_BR13_Pos) /*!< 0x20000000 */ -#define GPIO_BSRR_BR13 GPIO_BSRR_BR13_Msk /*!< Port x Reset bit 13 */ -#define GPIO_BSRR_BR14_Pos (30U) -#define GPIO_BSRR_BR14_Msk (0x1U << GPIO_BSRR_BR14_Pos) /*!< 0x40000000 */ -#define GPIO_BSRR_BR14 GPIO_BSRR_BR14_Msk /*!< Port x Reset bit 14 */ -#define GPIO_BSRR_BR15_Pos (31U) -#define GPIO_BSRR_BR15_Msk (0x1U << GPIO_BSRR_BR15_Pos) /*!< 0x80000000 */ -#define GPIO_BSRR_BR15 GPIO_BSRR_BR15_Msk /*!< Port x Reset bit 15 */ - -/******************* Bit definition for GPIO_BRR register *******************/ -#define GPIO_BRR_BR0_Pos (0U) -#define GPIO_BRR_BR0_Msk (0x1U << GPIO_BRR_BR0_Pos) /*!< 0x00000001 */ -#define GPIO_BRR_BR0 GPIO_BRR_BR0_Msk /*!< Port x Reset bit 0 */ -#define GPIO_BRR_BR1_Pos (1U) -#define GPIO_BRR_BR1_Msk (0x1U << GPIO_BRR_BR1_Pos) /*!< 0x00000002 */ -#define GPIO_BRR_BR1 GPIO_BRR_BR1_Msk /*!< Port x Reset bit 1 */ -#define GPIO_BRR_BR2_Pos (2U) -#define GPIO_BRR_BR2_Msk (0x1U << GPIO_BRR_BR2_Pos) /*!< 0x00000004 */ -#define GPIO_BRR_BR2 GPIO_BRR_BR2_Msk /*!< Port x Reset bit 2 */ -#define GPIO_BRR_BR3_Pos (3U) -#define GPIO_BRR_BR3_Msk (0x1U << GPIO_BRR_BR3_Pos) /*!< 0x00000008 */ -#define GPIO_BRR_BR3 GPIO_BRR_BR3_Msk /*!< Port x Reset bit 3 */ -#define GPIO_BRR_BR4_Pos (4U) -#define GPIO_BRR_BR4_Msk (0x1U << GPIO_BRR_BR4_Pos) /*!< 0x00000010 */ -#define GPIO_BRR_BR4 GPIO_BRR_BR4_Msk /*!< Port x Reset bit 4 */ -#define GPIO_BRR_BR5_Pos (5U) -#define GPIO_BRR_BR5_Msk (0x1U << GPIO_BRR_BR5_Pos) /*!< 0x00000020 */ -#define GPIO_BRR_BR5 GPIO_BRR_BR5_Msk /*!< Port x Reset bit 5 */ -#define GPIO_BRR_BR6_Pos (6U) -#define GPIO_BRR_BR6_Msk (0x1U << GPIO_BRR_BR6_Pos) /*!< 0x00000040 */ -#define GPIO_BRR_BR6 GPIO_BRR_BR6_Msk /*!< Port x Reset bit 6 */ -#define GPIO_BRR_BR7_Pos (7U) -#define GPIO_BRR_BR7_Msk (0x1U << GPIO_BRR_BR7_Pos) /*!< 0x00000080 */ -#define GPIO_BRR_BR7 GPIO_BRR_BR7_Msk /*!< Port x Reset bit 7 */ -#define GPIO_BRR_BR8_Pos (8U) -#define GPIO_BRR_BR8_Msk (0x1U << GPIO_BRR_BR8_Pos) /*!< 0x00000100 */ -#define GPIO_BRR_BR8 GPIO_BRR_BR8_Msk /*!< Port x Reset bit 8 */ -#define GPIO_BRR_BR9_Pos (9U) -#define GPIO_BRR_BR9_Msk (0x1U << GPIO_BRR_BR9_Pos) /*!< 0x00000200 */ -#define GPIO_BRR_BR9 GPIO_BRR_BR9_Msk /*!< Port x Reset bit 9 */ -#define GPIO_BRR_BR10_Pos (10U) -#define GPIO_BRR_BR10_Msk (0x1U << GPIO_BRR_BR10_Pos) /*!< 0x00000400 */ -#define GPIO_BRR_BR10 GPIO_BRR_BR10_Msk /*!< Port x Reset bit 10 */ -#define GPIO_BRR_BR11_Pos (11U) -#define GPIO_BRR_BR11_Msk (0x1U << GPIO_BRR_BR11_Pos) /*!< 0x00000800 */ -#define GPIO_BRR_BR11 GPIO_BRR_BR11_Msk /*!< Port x Reset bit 11 */ -#define GPIO_BRR_BR12_Pos (12U) -#define GPIO_BRR_BR12_Msk (0x1U << GPIO_BRR_BR12_Pos) /*!< 0x00001000 */ -#define GPIO_BRR_BR12 GPIO_BRR_BR12_Msk /*!< Port x Reset bit 12 */ -#define GPIO_BRR_BR13_Pos (13U) -#define GPIO_BRR_BR13_Msk (0x1U << GPIO_BRR_BR13_Pos) /*!< 0x00002000 */ -#define GPIO_BRR_BR13 GPIO_BRR_BR13_Msk /*!< Port x Reset bit 13 */ -#define GPIO_BRR_BR14_Pos (14U) -#define GPIO_BRR_BR14_Msk (0x1U << GPIO_BRR_BR14_Pos) /*!< 0x00004000 */ -#define GPIO_BRR_BR14 GPIO_BRR_BR14_Msk /*!< Port x Reset bit 14 */ -#define GPIO_BRR_BR15_Pos (15U) -#define GPIO_BRR_BR15_Msk (0x1U << GPIO_BRR_BR15_Pos) /*!< 0x00008000 */ -#define GPIO_BRR_BR15 GPIO_BRR_BR15_Msk /*!< Port x Reset bit 15 */ - -/****************** Bit definition for GPIO_LCKR register *******************/ -#define GPIO_LCKR_LCK0_Pos (0U) -#define GPIO_LCKR_LCK0_Msk (0x1U << GPIO_LCKR_LCK0_Pos) /*!< 0x00000001 */ -#define GPIO_LCKR_LCK0 GPIO_LCKR_LCK0_Msk /*!< Port x Lock bit 0 */ -#define GPIO_LCKR_LCK1_Pos (1U) -#define GPIO_LCKR_LCK1_Msk (0x1U << GPIO_LCKR_LCK1_Pos) /*!< 0x00000002 */ -#define GPIO_LCKR_LCK1 GPIO_LCKR_LCK1_Msk /*!< Port x Lock bit 1 */ -#define GPIO_LCKR_LCK2_Pos (2U) -#define GPIO_LCKR_LCK2_Msk (0x1U << GPIO_LCKR_LCK2_Pos) /*!< 0x00000004 */ -#define GPIO_LCKR_LCK2 GPIO_LCKR_LCK2_Msk /*!< Port x Lock bit 2 */ -#define GPIO_LCKR_LCK3_Pos (3U) -#define GPIO_LCKR_LCK3_Msk (0x1U << GPIO_LCKR_LCK3_Pos) /*!< 0x00000008 */ -#define GPIO_LCKR_LCK3 GPIO_LCKR_LCK3_Msk /*!< Port x Lock bit 3 */ -#define GPIO_LCKR_LCK4_Pos (4U) -#define GPIO_LCKR_LCK4_Msk (0x1U << GPIO_LCKR_LCK4_Pos) /*!< 0x00000010 */ -#define GPIO_LCKR_LCK4 GPIO_LCKR_LCK4_Msk /*!< Port x Lock bit 4 */ -#define GPIO_LCKR_LCK5_Pos (5U) -#define GPIO_LCKR_LCK5_Msk (0x1U << GPIO_LCKR_LCK5_Pos) /*!< 0x00000020 */ -#define GPIO_LCKR_LCK5 GPIO_LCKR_LCK5_Msk /*!< Port x Lock bit 5 */ -#define GPIO_LCKR_LCK6_Pos (6U) -#define GPIO_LCKR_LCK6_Msk (0x1U << GPIO_LCKR_LCK6_Pos) /*!< 0x00000040 */ -#define GPIO_LCKR_LCK6 GPIO_LCKR_LCK6_Msk /*!< Port x Lock bit 6 */ -#define GPIO_LCKR_LCK7_Pos (7U) -#define GPIO_LCKR_LCK7_Msk (0x1U << GPIO_LCKR_LCK7_Pos) /*!< 0x00000080 */ -#define GPIO_LCKR_LCK7 GPIO_LCKR_LCK7_Msk /*!< Port x Lock bit 7 */ -#define GPIO_LCKR_LCK8_Pos (8U) -#define GPIO_LCKR_LCK8_Msk (0x1U << GPIO_LCKR_LCK8_Pos) /*!< 0x00000100 */ -#define GPIO_LCKR_LCK8 GPIO_LCKR_LCK8_Msk /*!< Port x Lock bit 8 */ -#define GPIO_LCKR_LCK9_Pos (9U) -#define GPIO_LCKR_LCK9_Msk (0x1U << GPIO_LCKR_LCK9_Pos) /*!< 0x00000200 */ -#define GPIO_LCKR_LCK9 GPIO_LCKR_LCK9_Msk /*!< Port x Lock bit 9 */ -#define GPIO_LCKR_LCK10_Pos (10U) -#define GPIO_LCKR_LCK10_Msk (0x1U << GPIO_LCKR_LCK10_Pos) /*!< 0x00000400 */ -#define GPIO_LCKR_LCK10 GPIO_LCKR_LCK10_Msk /*!< Port x Lock bit 10 */ -#define GPIO_LCKR_LCK11_Pos (11U) -#define GPIO_LCKR_LCK11_Msk (0x1U << GPIO_LCKR_LCK11_Pos) /*!< 0x00000800 */ -#define GPIO_LCKR_LCK11 GPIO_LCKR_LCK11_Msk /*!< Port x Lock bit 11 */ -#define GPIO_LCKR_LCK12_Pos (12U) -#define GPIO_LCKR_LCK12_Msk (0x1U << GPIO_LCKR_LCK12_Pos) /*!< 0x00001000 */ -#define GPIO_LCKR_LCK12 GPIO_LCKR_LCK12_Msk /*!< Port x Lock bit 12 */ -#define GPIO_LCKR_LCK13_Pos (13U) -#define GPIO_LCKR_LCK13_Msk (0x1U << GPIO_LCKR_LCK13_Pos) /*!< 0x00002000 */ -#define GPIO_LCKR_LCK13 GPIO_LCKR_LCK13_Msk /*!< Port x Lock bit 13 */ -#define GPIO_LCKR_LCK14_Pos (14U) -#define GPIO_LCKR_LCK14_Msk (0x1U << GPIO_LCKR_LCK14_Pos) /*!< 0x00004000 */ -#define GPIO_LCKR_LCK14 GPIO_LCKR_LCK14_Msk /*!< Port x Lock bit 14 */ -#define GPIO_LCKR_LCK15_Pos (15U) -#define GPIO_LCKR_LCK15_Msk (0x1U << GPIO_LCKR_LCK15_Pos) /*!< 0x00008000 */ -#define GPIO_LCKR_LCK15 GPIO_LCKR_LCK15_Msk /*!< Port x Lock bit 15 */ -#define GPIO_LCKR_LCKK_Pos (16U) -#define GPIO_LCKR_LCKK_Msk (0x1U << GPIO_LCKR_LCKK_Pos) /*!< 0x00010000 */ -#define GPIO_LCKR_LCKK GPIO_LCKR_LCKK_Msk /*!< Lock key */ - -/*----------------------------------------------------------------------------*/ - -/****************** Bit definition for AFIO_EVCR register *******************/ -#define AFIO_EVCR_PIN_Pos (0U) -#define AFIO_EVCR_PIN_Msk (0xFU << AFIO_EVCR_PIN_Pos) /*!< 0x0000000F */ -#define AFIO_EVCR_PIN AFIO_EVCR_PIN_Msk /*!< PIN[3:0] bits (Pin selection) */ -#define AFIO_EVCR_PIN_0 (0x1U << AFIO_EVCR_PIN_Pos) /*!< 0x00000001 */ -#define AFIO_EVCR_PIN_1 (0x2U << AFIO_EVCR_PIN_Pos) /*!< 0x00000002 */ -#define AFIO_EVCR_PIN_2 (0x4U << AFIO_EVCR_PIN_Pos) /*!< 0x00000004 */ -#define AFIO_EVCR_PIN_3 (0x8U << AFIO_EVCR_PIN_Pos) /*!< 0x00000008 */ - -/*!< PIN configuration */ -#define AFIO_EVCR_PIN_PX0 ((uint32_t)0x00000000) /*!< Pin 0 selected */ -#define AFIO_EVCR_PIN_PX1_Pos (0U) -#define AFIO_EVCR_PIN_PX1_Msk (0x1U << AFIO_EVCR_PIN_PX1_Pos) /*!< 0x00000001 */ -#define AFIO_EVCR_PIN_PX1 AFIO_EVCR_PIN_PX1_Msk /*!< Pin 1 selected */ -#define AFIO_EVCR_PIN_PX2_Pos (1U) -#define AFIO_EVCR_PIN_PX2_Msk (0x1U << AFIO_EVCR_PIN_PX2_Pos) /*!< 0x00000002 */ -#define AFIO_EVCR_PIN_PX2 AFIO_EVCR_PIN_PX2_Msk /*!< Pin 2 selected */ -#define AFIO_EVCR_PIN_PX3_Pos (0U) -#define AFIO_EVCR_PIN_PX3_Msk (0x3U << AFIO_EVCR_PIN_PX3_Pos) /*!< 0x00000003 */ -#define AFIO_EVCR_PIN_PX3 AFIO_EVCR_PIN_PX3_Msk /*!< Pin 3 selected */ -#define AFIO_EVCR_PIN_PX4_Pos (2U) -#define AFIO_EVCR_PIN_PX4_Msk (0x1U << AFIO_EVCR_PIN_PX4_Pos) /*!< 0x00000004 */ -#define AFIO_EVCR_PIN_PX4 AFIO_EVCR_PIN_PX4_Msk /*!< Pin 4 selected */ -#define AFIO_EVCR_PIN_PX5_Pos (0U) -#define AFIO_EVCR_PIN_PX5_Msk (0x5U << AFIO_EVCR_PIN_PX5_Pos) /*!< 0x00000005 */ -#define AFIO_EVCR_PIN_PX5 AFIO_EVCR_PIN_PX5_Msk /*!< Pin 5 selected */ -#define AFIO_EVCR_PIN_PX6_Pos (1U) -#define AFIO_EVCR_PIN_PX6_Msk (0x3U << AFIO_EVCR_PIN_PX6_Pos) /*!< 0x00000006 */ -#define AFIO_EVCR_PIN_PX6 AFIO_EVCR_PIN_PX6_Msk /*!< Pin 6 selected */ -#define AFIO_EVCR_PIN_PX7_Pos (0U) -#define AFIO_EVCR_PIN_PX7_Msk (0x7U << AFIO_EVCR_PIN_PX7_Pos) /*!< 0x00000007 */ -#define AFIO_EVCR_PIN_PX7 AFIO_EVCR_PIN_PX7_Msk /*!< Pin 7 selected */ -#define AFIO_EVCR_PIN_PX8_Pos (3U) -#define AFIO_EVCR_PIN_PX8_Msk (0x1U << AFIO_EVCR_PIN_PX8_Pos) /*!< 0x00000008 */ -#define AFIO_EVCR_PIN_PX8 AFIO_EVCR_PIN_PX8_Msk /*!< Pin 8 selected */ -#define AFIO_EVCR_PIN_PX9_Pos (0U) -#define AFIO_EVCR_PIN_PX9_Msk (0x9U << AFIO_EVCR_PIN_PX9_Pos) /*!< 0x00000009 */ -#define AFIO_EVCR_PIN_PX9 AFIO_EVCR_PIN_PX9_Msk /*!< Pin 9 selected */ -#define AFIO_EVCR_PIN_PX10_Pos (1U) -#define AFIO_EVCR_PIN_PX10_Msk (0x5U << AFIO_EVCR_PIN_PX10_Pos) /*!< 0x0000000A */ -#define AFIO_EVCR_PIN_PX10 AFIO_EVCR_PIN_PX10_Msk /*!< Pin 10 selected */ -#define AFIO_EVCR_PIN_PX11_Pos (0U) -#define AFIO_EVCR_PIN_PX11_Msk (0xBU << AFIO_EVCR_PIN_PX11_Pos) /*!< 0x0000000B */ -#define AFIO_EVCR_PIN_PX11 AFIO_EVCR_PIN_PX11_Msk /*!< Pin 11 selected */ -#define AFIO_EVCR_PIN_PX12_Pos (2U) -#define AFIO_EVCR_PIN_PX12_Msk (0x3U << AFIO_EVCR_PIN_PX12_Pos) /*!< 0x0000000C */ -#define AFIO_EVCR_PIN_PX12 AFIO_EVCR_PIN_PX12_Msk /*!< Pin 12 selected */ -#define AFIO_EVCR_PIN_PX13_Pos (0U) -#define AFIO_EVCR_PIN_PX13_Msk (0xDU << AFIO_EVCR_PIN_PX13_Pos) /*!< 0x0000000D */ -#define AFIO_EVCR_PIN_PX13 AFIO_EVCR_PIN_PX13_Msk /*!< Pin 13 selected */ -#define AFIO_EVCR_PIN_PX14_Pos (1U) -#define AFIO_EVCR_PIN_PX14_Msk (0x7U << AFIO_EVCR_PIN_PX14_Pos) /*!< 0x0000000E */ -#define AFIO_EVCR_PIN_PX14 AFIO_EVCR_PIN_PX14_Msk /*!< Pin 14 selected */ -#define AFIO_EVCR_PIN_PX15_Pos (0U) -#define AFIO_EVCR_PIN_PX15_Msk (0xFU << AFIO_EVCR_PIN_PX15_Pos) /*!< 0x0000000F */ -#define AFIO_EVCR_PIN_PX15 AFIO_EVCR_PIN_PX15_Msk /*!< Pin 15 selected */ - -#define AFIO_EVCR_PORT_Pos (4U) -#define AFIO_EVCR_PORT_Msk (0x7U << AFIO_EVCR_PORT_Pos) /*!< 0x00000070 */ -#define AFIO_EVCR_PORT AFIO_EVCR_PORT_Msk /*!< PORT[2:0] bits (Port selection) */ -#define AFIO_EVCR_PORT_0 (0x1U << AFIO_EVCR_PORT_Pos) /*!< 0x00000010 */ -#define AFIO_EVCR_PORT_1 (0x2U << AFIO_EVCR_PORT_Pos) /*!< 0x00000020 */ -#define AFIO_EVCR_PORT_2 (0x4U << AFIO_EVCR_PORT_Pos) /*!< 0x00000040 */ - -/*!< PORT configuration */ -#define AFIO_EVCR_PORT_PA ((uint32_t)0x00000000) /*!< Port A selected */ -#define AFIO_EVCR_PORT_PB_Pos (4U) -#define AFIO_EVCR_PORT_PB_Msk (0x1U << AFIO_EVCR_PORT_PB_Pos) /*!< 0x00000010 */ -#define AFIO_EVCR_PORT_PB AFIO_EVCR_PORT_PB_Msk /*!< Port B selected */ -#define AFIO_EVCR_PORT_PC_Pos (5U) -#define AFIO_EVCR_PORT_PC_Msk (0x1U << AFIO_EVCR_PORT_PC_Pos) /*!< 0x00000020 */ -#define AFIO_EVCR_PORT_PC AFIO_EVCR_PORT_PC_Msk /*!< Port C selected */ -#define AFIO_EVCR_PORT_PD_Pos (4U) -#define AFIO_EVCR_PORT_PD_Msk (0x3U << AFIO_EVCR_PORT_PD_Pos) /*!< 0x00000030 */ -#define AFIO_EVCR_PORT_PD AFIO_EVCR_PORT_PD_Msk /*!< Port D selected */ -#define AFIO_EVCR_PORT_PE_Pos (6U) -#define AFIO_EVCR_PORT_PE_Msk (0x1U << AFIO_EVCR_PORT_PE_Pos) /*!< 0x00000040 */ -#define AFIO_EVCR_PORT_PE AFIO_EVCR_PORT_PE_Msk /*!< Port E selected */ - -#define AFIO_EVCR_EVOE_Pos (7U) -#define AFIO_EVCR_EVOE_Msk (0x1U << AFIO_EVCR_EVOE_Pos) /*!< 0x00000080 */ -#define AFIO_EVCR_EVOE AFIO_EVCR_EVOE_Msk /*!< Event Output Enable */ - -/****************** Bit definition for AFIO_MAPR register *******************/ -#define AFIO_MAPR_SPI1_REMAP_Pos (0U) -#define AFIO_MAPR_SPI1_REMAP_Msk (0x1U << AFIO_MAPR_SPI1_REMAP_Pos) /*!< 0x00000001 */ -#define AFIO_MAPR_SPI1_REMAP AFIO_MAPR_SPI1_REMAP_Msk /*!< SPI1 remapping */ -#define AFIO_MAPR_I2C1_REMAP_Pos (1U) -#define AFIO_MAPR_I2C1_REMAP_Msk (0x1U << AFIO_MAPR_I2C1_REMAP_Pos) /*!< 0x00000002 */ -#define AFIO_MAPR_I2C1_REMAP AFIO_MAPR_I2C1_REMAP_Msk /*!< I2C1 remapping */ -#define AFIO_MAPR_USART1_REMAP_Pos (2U) -#define AFIO_MAPR_USART1_REMAP_Msk (0x1U << AFIO_MAPR_USART1_REMAP_Pos) /*!< 0x00000004 */ -#define AFIO_MAPR_USART1_REMAP AFIO_MAPR_USART1_REMAP_Msk /*!< USART1 remapping */ -#define AFIO_MAPR_USART2_REMAP_Pos (3U) -#define AFIO_MAPR_USART2_REMAP_Msk (0x1U << AFIO_MAPR_USART2_REMAP_Pos) /*!< 0x00000008 */ -#define AFIO_MAPR_USART2_REMAP AFIO_MAPR_USART2_REMAP_Msk /*!< USART2 remapping */ - - -#define AFIO_MAPR_TIM1_REMAP_Pos (6U) -#define AFIO_MAPR_TIM1_REMAP_Msk (0x3U << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x000000C0 */ -#define AFIO_MAPR_TIM1_REMAP AFIO_MAPR_TIM1_REMAP_Msk /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ -#define AFIO_MAPR_TIM1_REMAP_0 (0x1U << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000040 */ -#define AFIO_MAPR_TIM1_REMAP_1 (0x2U << AFIO_MAPR_TIM1_REMAP_Pos) /*!< 0x00000080 */ - -/*!< TIM1_REMAP configuration */ -#define AFIO_MAPR_TIM1_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ -#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos (6U) -#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk (0x1U << AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Pos) /*!< 0x00000040 */ -#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP AFIO_MAPR_TIM1_REMAP_PARTIALREMAP_Msk /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ -#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos (6U) -#define AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk (0x3U << AFIO_MAPR_TIM1_REMAP_FULLREMAP_Pos) /*!< 0x000000C0 */ -#define AFIO_MAPR_TIM1_REMAP_FULLREMAP AFIO_MAPR_TIM1_REMAP_FULLREMAP_Msk /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ - -#define AFIO_MAPR_TIM2_REMAP_Pos (8U) -#define AFIO_MAPR_TIM2_REMAP_Msk (0x3U << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000300 */ -#define AFIO_MAPR_TIM2_REMAP AFIO_MAPR_TIM2_REMAP_Msk /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ -#define AFIO_MAPR_TIM2_REMAP_0 (0x1U << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000100 */ -#define AFIO_MAPR_TIM2_REMAP_1 (0x2U << AFIO_MAPR_TIM2_REMAP_Pos) /*!< 0x00000200 */ - -/*!< TIM2_REMAP configuration */ -#define AFIO_MAPR_TIM2_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ -#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos (8U) -#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk (0x1U << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Pos) /*!< 0x00000100 */ -#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1_Msk /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ -#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos (9U) -#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk (0x1U << AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Pos) /*!< 0x00000200 */ -#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2_Msk /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ -#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos (8U) -#define AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk (0x3U << AFIO_MAPR_TIM2_REMAP_FULLREMAP_Pos) /*!< 0x00000300 */ -#define AFIO_MAPR_TIM2_REMAP_FULLREMAP AFIO_MAPR_TIM2_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ - -#define AFIO_MAPR_TIM3_REMAP_Pos (10U) -#define AFIO_MAPR_TIM3_REMAP_Msk (0x3U << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000C00 */ -#define AFIO_MAPR_TIM3_REMAP AFIO_MAPR_TIM3_REMAP_Msk /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ -#define AFIO_MAPR_TIM3_REMAP_0 (0x1U << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000400 */ -#define AFIO_MAPR_TIM3_REMAP_1 (0x2U << AFIO_MAPR_TIM3_REMAP_Pos) /*!< 0x00000800 */ - -/*!< TIM3_REMAP configuration */ -#define AFIO_MAPR_TIM3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ -#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos (11U) -#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk (0x1U << AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Pos) /*!< 0x00000800 */ -#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP AFIO_MAPR_TIM3_REMAP_PARTIALREMAP_Msk /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ -#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos (10U) -#define AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk (0x3U << AFIO_MAPR_TIM3_REMAP_FULLREMAP_Pos) /*!< 0x00000C00 */ -#define AFIO_MAPR_TIM3_REMAP_FULLREMAP AFIO_MAPR_TIM3_REMAP_FULLREMAP_Msk /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ - - -#define AFIO_MAPR_CAN_REMAP_Pos (13U) -#define AFIO_MAPR_CAN_REMAP_Msk (0x3U << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00006000 */ -#define AFIO_MAPR_CAN_REMAP AFIO_MAPR_CAN_REMAP_Msk /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ -#define AFIO_MAPR_CAN_REMAP_0 (0x1U << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00002000 */ -#define AFIO_MAPR_CAN_REMAP_1 (0x2U << AFIO_MAPR_CAN_REMAP_Pos) /*!< 0x00004000 */ - -/*!< CAN_REMAP configuration */ -#define AFIO_MAPR_CAN_REMAP_REMAP1 ((uint32_t)0x00000000) /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ -#define AFIO_MAPR_CAN_REMAP_REMAP2_Pos (14U) -#define AFIO_MAPR_CAN_REMAP_REMAP2_Msk (0x1U << AFIO_MAPR_CAN_REMAP_REMAP2_Pos) /*!< 0x00004000 */ -#define AFIO_MAPR_CAN_REMAP_REMAP2 AFIO_MAPR_CAN_REMAP_REMAP2_Msk /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ -#define AFIO_MAPR_CAN_REMAP_REMAP3_Pos (13U) -#define AFIO_MAPR_CAN_REMAP_REMAP3_Msk (0x3U << AFIO_MAPR_CAN_REMAP_REMAP3_Pos) /*!< 0x00006000 */ -#define AFIO_MAPR_CAN_REMAP_REMAP3 AFIO_MAPR_CAN_REMAP_REMAP3_Msk /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ - -#define AFIO_MAPR_PD01_REMAP_Pos (15U) -#define AFIO_MAPR_PD01_REMAP_Msk (0x1U << AFIO_MAPR_PD01_REMAP_Pos) /*!< 0x00008000 */ -#define AFIO_MAPR_PD01_REMAP AFIO_MAPR_PD01_REMAP_Msk /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ - -/*!< SWJ_CFG configuration */ -#define AFIO_MAPR_SWJ_CFG_Pos (24U) -#define AFIO_MAPR_SWJ_CFG_Msk (0x7U << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x07000000 */ -#define AFIO_MAPR_SWJ_CFG AFIO_MAPR_SWJ_CFG_Msk /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ -#define AFIO_MAPR_SWJ_CFG_0 (0x1U << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x01000000 */ -#define AFIO_MAPR_SWJ_CFG_1 (0x2U << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x02000000 */ -#define AFIO_MAPR_SWJ_CFG_2 (0x4U << AFIO_MAPR_SWJ_CFG_Pos) /*!< 0x04000000 */ - -#define AFIO_MAPR_SWJ_CFG_RESET ((uint32_t)0x00000000) /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ -#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos (24U) -#define AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk (0x1U << AFIO_MAPR_SWJ_CFG_NOJNTRST_Pos) /*!< 0x01000000 */ -#define AFIO_MAPR_SWJ_CFG_NOJNTRST AFIO_MAPR_SWJ_CFG_NOJNTRST_Msk /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ -#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos (25U) -#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk (0x1U << AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Pos) /*!< 0x02000000 */ -#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE AFIO_MAPR_SWJ_CFG_JTAGDISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Enabled */ -#define AFIO_MAPR_SWJ_CFG_DISABLE_Pos (26U) -#define AFIO_MAPR_SWJ_CFG_DISABLE_Msk (0x1U << AFIO_MAPR_SWJ_CFG_DISABLE_Pos) /*!< 0x04000000 */ -#define AFIO_MAPR_SWJ_CFG_DISABLE AFIO_MAPR_SWJ_CFG_DISABLE_Msk /*!< JTAG-DP Disabled and SW-DP Disabled */ - - -/***************** Bit definition for AFIO_EXTICR1 register *****************/ -#define AFIO_EXTICR1_EXTI0_Pos (0U) -#define AFIO_EXTICR1_EXTI0_Msk (0xFU << AFIO_EXTICR1_EXTI0_Pos) /*!< 0x0000000F */ -#define AFIO_EXTICR1_EXTI0 AFIO_EXTICR1_EXTI0_Msk /*!< EXTI 0 configuration */ -#define AFIO_EXTICR1_EXTI1_Pos (4U) -#define AFIO_EXTICR1_EXTI1_Msk (0xFU << AFIO_EXTICR1_EXTI1_Pos) /*!< 0x000000F0 */ -#define AFIO_EXTICR1_EXTI1 AFIO_EXTICR1_EXTI1_Msk /*!< EXTI 1 configuration */ -#define AFIO_EXTICR1_EXTI2_Pos (8U) -#define AFIO_EXTICR1_EXTI2_Msk (0xFU << AFIO_EXTICR1_EXTI2_Pos) /*!< 0x00000F00 */ -#define AFIO_EXTICR1_EXTI2 AFIO_EXTICR1_EXTI2_Msk /*!< EXTI 2 configuration */ -#define AFIO_EXTICR1_EXTI3_Pos (12U) -#define AFIO_EXTICR1_EXTI3_Msk (0xFU << AFIO_EXTICR1_EXTI3_Pos) /*!< 0x0000F000 */ -#define AFIO_EXTICR1_EXTI3 AFIO_EXTICR1_EXTI3_Msk /*!< EXTI 3 configuration */ - -/*!< EXTI0 configuration */ -#define AFIO_EXTICR1_EXTI0_PA ((uint32_t)0x00000000) /*!< PA[0] pin */ -#define AFIO_EXTICR1_EXTI0_PB_Pos (0U) -#define AFIO_EXTICR1_EXTI0_PB_Msk (0x1U << AFIO_EXTICR1_EXTI0_PB_Pos) /*!< 0x00000001 */ -#define AFIO_EXTICR1_EXTI0_PB AFIO_EXTICR1_EXTI0_PB_Msk /*!< PB[0] pin */ -#define AFIO_EXTICR1_EXTI0_PC_Pos (1U) -#define AFIO_EXTICR1_EXTI0_PC_Msk (0x1U << AFIO_EXTICR1_EXTI0_PC_Pos) /*!< 0x00000002 */ -#define AFIO_EXTICR1_EXTI0_PC AFIO_EXTICR1_EXTI0_PC_Msk /*!< PC[0] pin */ -#define AFIO_EXTICR1_EXTI0_PD_Pos (0U) -#define AFIO_EXTICR1_EXTI0_PD_Msk (0x3U << AFIO_EXTICR1_EXTI0_PD_Pos) /*!< 0x00000003 */ -#define AFIO_EXTICR1_EXTI0_PD AFIO_EXTICR1_EXTI0_PD_Msk /*!< PD[0] pin */ -#define AFIO_EXTICR1_EXTI0_PE_Pos (2U) -#define AFIO_EXTICR1_EXTI0_PE_Msk (0x1U << AFIO_EXTICR1_EXTI0_PE_Pos) /*!< 0x00000004 */ -#define AFIO_EXTICR1_EXTI0_PE AFIO_EXTICR1_EXTI0_PE_Msk /*!< PE[0] pin */ -#define AFIO_EXTICR1_EXTI0_PF_Pos (0U) -#define AFIO_EXTICR1_EXTI0_PF_Msk (0x5U << AFIO_EXTICR1_EXTI0_PF_Pos) /*!< 0x00000005 */ -#define AFIO_EXTICR1_EXTI0_PF AFIO_EXTICR1_EXTI0_PF_Msk /*!< PF[0] pin */ -#define AFIO_EXTICR1_EXTI0_PG_Pos (1U) -#define AFIO_EXTICR1_EXTI0_PG_Msk (0x3U << AFIO_EXTICR1_EXTI0_PG_Pos) /*!< 0x00000006 */ -#define AFIO_EXTICR1_EXTI0_PG AFIO_EXTICR1_EXTI0_PG_Msk /*!< PG[0] pin */ - -/*!< EXTI1 configuration */ -#define AFIO_EXTICR1_EXTI1_PA ((uint32_t)0x00000000) /*!< PA[1] pin */ -#define AFIO_EXTICR1_EXTI1_PB_Pos (4U) -#define AFIO_EXTICR1_EXTI1_PB_Msk (0x1U << AFIO_EXTICR1_EXTI1_PB_Pos) /*!< 0x00000010 */ -#define AFIO_EXTICR1_EXTI1_PB AFIO_EXTICR1_EXTI1_PB_Msk /*!< PB[1] pin */ -#define AFIO_EXTICR1_EXTI1_PC_Pos (5U) -#define AFIO_EXTICR1_EXTI1_PC_Msk (0x1U << AFIO_EXTICR1_EXTI1_PC_Pos) /*!< 0x00000020 */ -#define AFIO_EXTICR1_EXTI1_PC AFIO_EXTICR1_EXTI1_PC_Msk /*!< PC[1] pin */ -#define AFIO_EXTICR1_EXTI1_PD_Pos (4U) -#define AFIO_EXTICR1_EXTI1_PD_Msk (0x3U << AFIO_EXTICR1_EXTI1_PD_Pos) /*!< 0x00000030 */ -#define AFIO_EXTICR1_EXTI1_PD AFIO_EXTICR1_EXTI1_PD_Msk /*!< PD[1] pin */ -#define AFIO_EXTICR1_EXTI1_PE_Pos (6U) -#define AFIO_EXTICR1_EXTI1_PE_Msk (0x1U << AFIO_EXTICR1_EXTI1_PE_Pos) /*!< 0x00000040 */ -#define AFIO_EXTICR1_EXTI1_PE AFIO_EXTICR1_EXTI1_PE_Msk /*!< PE[1] pin */ -#define AFIO_EXTICR1_EXTI1_PF_Pos (4U) -#define AFIO_EXTICR1_EXTI1_PF_Msk (0x5U << AFIO_EXTICR1_EXTI1_PF_Pos) /*!< 0x00000050 */ -#define AFIO_EXTICR1_EXTI1_PF AFIO_EXTICR1_EXTI1_PF_Msk /*!< PF[1] pin */ -#define AFIO_EXTICR1_EXTI1_PG_Pos (5U) -#define AFIO_EXTICR1_EXTI1_PG_Msk (0x3U << AFIO_EXTICR1_EXTI1_PG_Pos) /*!< 0x00000060 */ -#define AFIO_EXTICR1_EXTI1_PG AFIO_EXTICR1_EXTI1_PG_Msk /*!< PG[1] pin */ - -/*!< EXTI2 configuration */ -#define AFIO_EXTICR1_EXTI2_PA ((uint32_t)0x00000000) /*!< PA[2] pin */ -#define AFIO_EXTICR1_EXTI2_PB_Pos (8U) -#define AFIO_EXTICR1_EXTI2_PB_Msk (0x1U << AFIO_EXTICR1_EXTI2_PB_Pos) /*!< 0x00000100 */ -#define AFIO_EXTICR1_EXTI2_PB AFIO_EXTICR1_EXTI2_PB_Msk /*!< PB[2] pin */ -#define AFIO_EXTICR1_EXTI2_PC_Pos (9U) -#define AFIO_EXTICR1_EXTI2_PC_Msk (0x1U << AFIO_EXTICR1_EXTI2_PC_Pos) /*!< 0x00000200 */ -#define AFIO_EXTICR1_EXTI2_PC AFIO_EXTICR1_EXTI2_PC_Msk /*!< PC[2] pin */ -#define AFIO_EXTICR1_EXTI2_PD_Pos (8U) -#define AFIO_EXTICR1_EXTI2_PD_Msk (0x3U << AFIO_EXTICR1_EXTI2_PD_Pos) /*!< 0x00000300 */ -#define AFIO_EXTICR1_EXTI2_PD AFIO_EXTICR1_EXTI2_PD_Msk /*!< PD[2] pin */ -#define AFIO_EXTICR1_EXTI2_PE_Pos (10U) -#define AFIO_EXTICR1_EXTI2_PE_Msk (0x1U << AFIO_EXTICR1_EXTI2_PE_Pos) /*!< 0x00000400 */ -#define AFIO_EXTICR1_EXTI2_PE AFIO_EXTICR1_EXTI2_PE_Msk /*!< PE[2] pin */ -#define AFIO_EXTICR1_EXTI2_PF_Pos (8U) -#define AFIO_EXTICR1_EXTI2_PF_Msk (0x5U << AFIO_EXTICR1_EXTI2_PF_Pos) /*!< 0x00000500 */ -#define AFIO_EXTICR1_EXTI2_PF AFIO_EXTICR1_EXTI2_PF_Msk /*!< PF[2] pin */ -#define AFIO_EXTICR1_EXTI2_PG_Pos (9U) -#define AFIO_EXTICR1_EXTI2_PG_Msk (0x3U << AFIO_EXTICR1_EXTI2_PG_Pos) /*!< 0x00000600 */ -#define AFIO_EXTICR1_EXTI2_PG AFIO_EXTICR1_EXTI2_PG_Msk /*!< PG[2] pin */ - -/*!< EXTI3 configuration */ -#define AFIO_EXTICR1_EXTI3_PA ((uint32_t)0x00000000) /*!< PA[3] pin */ -#define AFIO_EXTICR1_EXTI3_PB_Pos (12U) -#define AFIO_EXTICR1_EXTI3_PB_Msk (0x1U << AFIO_EXTICR1_EXTI3_PB_Pos) /*!< 0x00001000 */ -#define AFIO_EXTICR1_EXTI3_PB AFIO_EXTICR1_EXTI3_PB_Msk /*!< PB[3] pin */ -#define AFIO_EXTICR1_EXTI3_PC_Pos (13U) -#define AFIO_EXTICR1_EXTI3_PC_Msk (0x1U << AFIO_EXTICR1_EXTI3_PC_Pos) /*!< 0x00002000 */ -#define AFIO_EXTICR1_EXTI3_PC AFIO_EXTICR1_EXTI3_PC_Msk /*!< PC[3] pin */ -#define AFIO_EXTICR1_EXTI3_PD_Pos (12U) -#define AFIO_EXTICR1_EXTI3_PD_Msk (0x3U << AFIO_EXTICR1_EXTI3_PD_Pos) /*!< 0x00003000 */ -#define AFIO_EXTICR1_EXTI3_PD AFIO_EXTICR1_EXTI3_PD_Msk /*!< PD[3] pin */ -#define AFIO_EXTICR1_EXTI3_PE_Pos (14U) -#define AFIO_EXTICR1_EXTI3_PE_Msk (0x1U << AFIO_EXTICR1_EXTI3_PE_Pos) /*!< 0x00004000 */ -#define AFIO_EXTICR1_EXTI3_PE AFIO_EXTICR1_EXTI3_PE_Msk /*!< PE[3] pin */ -#define AFIO_EXTICR1_EXTI3_PF_Pos (12U) -#define AFIO_EXTICR1_EXTI3_PF_Msk (0x5U << AFIO_EXTICR1_EXTI3_PF_Pos) /*!< 0x00005000 */ -#define AFIO_EXTICR1_EXTI3_PF AFIO_EXTICR1_EXTI3_PF_Msk /*!< PF[3] pin */ -#define AFIO_EXTICR1_EXTI3_PG_Pos (13U) -#define AFIO_EXTICR1_EXTI3_PG_Msk (0x3U << AFIO_EXTICR1_EXTI3_PG_Pos) /*!< 0x00006000 */ -#define AFIO_EXTICR1_EXTI3_PG AFIO_EXTICR1_EXTI3_PG_Msk /*!< PG[3] pin */ - -/***************** Bit definition for AFIO_EXTICR2 register *****************/ -#define AFIO_EXTICR2_EXTI4_Pos (0U) -#define AFIO_EXTICR2_EXTI4_Msk (0xFU << AFIO_EXTICR2_EXTI4_Pos) /*!< 0x0000000F */ -#define AFIO_EXTICR2_EXTI4 AFIO_EXTICR2_EXTI4_Msk /*!< EXTI 4 configuration */ -#define AFIO_EXTICR2_EXTI5_Pos (4U) -#define AFIO_EXTICR2_EXTI5_Msk (0xFU << AFIO_EXTICR2_EXTI5_Pos) /*!< 0x000000F0 */ -#define AFIO_EXTICR2_EXTI5 AFIO_EXTICR2_EXTI5_Msk /*!< EXTI 5 configuration */ -#define AFIO_EXTICR2_EXTI6_Pos (8U) -#define AFIO_EXTICR2_EXTI6_Msk (0xFU << AFIO_EXTICR2_EXTI6_Pos) /*!< 0x00000F00 */ -#define AFIO_EXTICR2_EXTI6 AFIO_EXTICR2_EXTI6_Msk /*!< EXTI 6 configuration */ -#define AFIO_EXTICR2_EXTI7_Pos (12U) -#define AFIO_EXTICR2_EXTI7_Msk (0xFU << AFIO_EXTICR2_EXTI7_Pos) /*!< 0x0000F000 */ -#define AFIO_EXTICR2_EXTI7 AFIO_EXTICR2_EXTI7_Msk /*!< EXTI 7 configuration */ - -/*!< EXTI4 configuration */ -#define AFIO_EXTICR2_EXTI4_PA ((uint32_t)0x00000000) /*!< PA[4] pin */ -#define AFIO_EXTICR2_EXTI4_PB_Pos (0U) -#define AFIO_EXTICR2_EXTI4_PB_Msk (0x1U << AFIO_EXTICR2_EXTI4_PB_Pos) /*!< 0x00000001 */ -#define AFIO_EXTICR2_EXTI4_PB AFIO_EXTICR2_EXTI4_PB_Msk /*!< PB[4] pin */ -#define AFIO_EXTICR2_EXTI4_PC_Pos (1U) -#define AFIO_EXTICR2_EXTI4_PC_Msk (0x1U << AFIO_EXTICR2_EXTI4_PC_Pos) /*!< 0x00000002 */ -#define AFIO_EXTICR2_EXTI4_PC AFIO_EXTICR2_EXTI4_PC_Msk /*!< PC[4] pin */ -#define AFIO_EXTICR2_EXTI4_PD_Pos (0U) -#define AFIO_EXTICR2_EXTI4_PD_Msk (0x3U << AFIO_EXTICR2_EXTI4_PD_Pos) /*!< 0x00000003 */ -#define AFIO_EXTICR2_EXTI4_PD AFIO_EXTICR2_EXTI4_PD_Msk /*!< PD[4] pin */ -#define AFIO_EXTICR2_EXTI4_PE_Pos (2U) -#define AFIO_EXTICR2_EXTI4_PE_Msk (0x1U << AFIO_EXTICR2_EXTI4_PE_Pos) /*!< 0x00000004 */ -#define AFIO_EXTICR2_EXTI4_PE AFIO_EXTICR2_EXTI4_PE_Msk /*!< PE[4] pin */ -#define AFIO_EXTICR2_EXTI4_PF_Pos (0U) -#define AFIO_EXTICR2_EXTI4_PF_Msk (0x5U << AFIO_EXTICR2_EXTI4_PF_Pos) /*!< 0x00000005 */ -#define AFIO_EXTICR2_EXTI4_PF AFIO_EXTICR2_EXTI4_PF_Msk /*!< PF[4] pin */ -#define AFIO_EXTICR2_EXTI4_PG_Pos (1U) -#define AFIO_EXTICR2_EXTI4_PG_Msk (0x3U << AFIO_EXTICR2_EXTI4_PG_Pos) /*!< 0x00000006 */ -#define AFIO_EXTICR2_EXTI4_PG AFIO_EXTICR2_EXTI4_PG_Msk /*!< PG[4] pin */ - -/* EXTI5 configuration */ -#define AFIO_EXTICR2_EXTI5_PA ((uint32_t)0x00000000) /*!< PA[5] pin */ -#define AFIO_EXTICR2_EXTI5_PB_Pos (4U) -#define AFIO_EXTICR2_EXTI5_PB_Msk (0x1U << AFIO_EXTICR2_EXTI5_PB_Pos) /*!< 0x00000010 */ -#define AFIO_EXTICR2_EXTI5_PB AFIO_EXTICR2_EXTI5_PB_Msk /*!< PB[5] pin */ -#define AFIO_EXTICR2_EXTI5_PC_Pos (5U) -#define AFIO_EXTICR2_EXTI5_PC_Msk (0x1U << AFIO_EXTICR2_EXTI5_PC_Pos) /*!< 0x00000020 */ -#define AFIO_EXTICR2_EXTI5_PC AFIO_EXTICR2_EXTI5_PC_Msk /*!< PC[5] pin */ -#define AFIO_EXTICR2_EXTI5_PD_Pos (4U) -#define AFIO_EXTICR2_EXTI5_PD_Msk (0x3U << AFIO_EXTICR2_EXTI5_PD_Pos) /*!< 0x00000030 */ -#define AFIO_EXTICR2_EXTI5_PD AFIO_EXTICR2_EXTI5_PD_Msk /*!< PD[5] pin */ -#define AFIO_EXTICR2_EXTI5_PE_Pos (6U) -#define AFIO_EXTICR2_EXTI5_PE_Msk (0x1U << AFIO_EXTICR2_EXTI5_PE_Pos) /*!< 0x00000040 */ -#define AFIO_EXTICR2_EXTI5_PE AFIO_EXTICR2_EXTI5_PE_Msk /*!< PE[5] pin */ -#define AFIO_EXTICR2_EXTI5_PF_Pos (4U) -#define AFIO_EXTICR2_EXTI5_PF_Msk (0x5U << AFIO_EXTICR2_EXTI5_PF_Pos) /*!< 0x00000050 */ -#define AFIO_EXTICR2_EXTI5_PF AFIO_EXTICR2_EXTI5_PF_Msk /*!< PF[5] pin */ -#define AFIO_EXTICR2_EXTI5_PG_Pos (5U) -#define AFIO_EXTICR2_EXTI5_PG_Msk (0x3U << AFIO_EXTICR2_EXTI5_PG_Pos) /*!< 0x00000060 */ -#define AFIO_EXTICR2_EXTI5_PG AFIO_EXTICR2_EXTI5_PG_Msk /*!< PG[5] pin */ - -/*!< EXTI6 configuration */ -#define AFIO_EXTICR2_EXTI6_PA ((uint32_t)0x00000000) /*!< PA[6] pin */ -#define AFIO_EXTICR2_EXTI6_PB_Pos (8U) -#define AFIO_EXTICR2_EXTI6_PB_Msk (0x1U << AFIO_EXTICR2_EXTI6_PB_Pos) /*!< 0x00000100 */ -#define AFIO_EXTICR2_EXTI6_PB AFIO_EXTICR2_EXTI6_PB_Msk /*!< PB[6] pin */ -#define AFIO_EXTICR2_EXTI6_PC_Pos (9U) -#define AFIO_EXTICR2_EXTI6_PC_Msk (0x1U << AFIO_EXTICR2_EXTI6_PC_Pos) /*!< 0x00000200 */ -#define AFIO_EXTICR2_EXTI6_PC AFIO_EXTICR2_EXTI6_PC_Msk /*!< PC[6] pin */ -#define AFIO_EXTICR2_EXTI6_PD_Pos (8U) -#define AFIO_EXTICR2_EXTI6_PD_Msk (0x3U << AFIO_EXTICR2_EXTI6_PD_Pos) /*!< 0x00000300 */ -#define AFIO_EXTICR2_EXTI6_PD AFIO_EXTICR2_EXTI6_PD_Msk /*!< PD[6] pin */ -#define AFIO_EXTICR2_EXTI6_PE_Pos (10U) -#define AFIO_EXTICR2_EXTI6_PE_Msk (0x1U << AFIO_EXTICR2_EXTI6_PE_Pos) /*!< 0x00000400 */ -#define AFIO_EXTICR2_EXTI6_PE AFIO_EXTICR2_EXTI6_PE_Msk /*!< PE[6] pin */ -#define AFIO_EXTICR2_EXTI6_PF_Pos (8U) -#define AFIO_EXTICR2_EXTI6_PF_Msk (0x5U << AFIO_EXTICR2_EXTI6_PF_Pos) /*!< 0x00000500 */ -#define AFIO_EXTICR2_EXTI6_PF AFIO_EXTICR2_EXTI6_PF_Msk /*!< PF[6] pin */ -#define AFIO_EXTICR2_EXTI6_PG_Pos (9U) -#define AFIO_EXTICR2_EXTI6_PG_Msk (0x3U << AFIO_EXTICR2_EXTI6_PG_Pos) /*!< 0x00000600 */ -#define AFIO_EXTICR2_EXTI6_PG AFIO_EXTICR2_EXTI6_PG_Msk /*!< PG[6] pin */ - -/*!< EXTI7 configuration */ -#define AFIO_EXTICR2_EXTI7_PA ((uint32_t)0x00000000) /*!< PA[7] pin */ -#define AFIO_EXTICR2_EXTI7_PB_Pos (12U) -#define AFIO_EXTICR2_EXTI7_PB_Msk (0x1U << AFIO_EXTICR2_EXTI7_PB_Pos) /*!< 0x00001000 */ -#define AFIO_EXTICR2_EXTI7_PB AFIO_EXTICR2_EXTI7_PB_Msk /*!< PB[7] pin */ -#define AFIO_EXTICR2_EXTI7_PC_Pos (13U) -#define AFIO_EXTICR2_EXTI7_PC_Msk (0x1U << AFIO_EXTICR2_EXTI7_PC_Pos) /*!< 0x00002000 */ -#define AFIO_EXTICR2_EXTI7_PC AFIO_EXTICR2_EXTI7_PC_Msk /*!< PC[7] pin */ -#define AFIO_EXTICR2_EXTI7_PD_Pos (12U) -#define AFIO_EXTICR2_EXTI7_PD_Msk (0x3U << AFIO_EXTICR2_EXTI7_PD_Pos) /*!< 0x00003000 */ -#define AFIO_EXTICR2_EXTI7_PD AFIO_EXTICR2_EXTI7_PD_Msk /*!< PD[7] pin */ -#define AFIO_EXTICR2_EXTI7_PE_Pos (14U) -#define AFIO_EXTICR2_EXTI7_PE_Msk (0x1U << AFIO_EXTICR2_EXTI7_PE_Pos) /*!< 0x00004000 */ -#define AFIO_EXTICR2_EXTI7_PE AFIO_EXTICR2_EXTI7_PE_Msk /*!< PE[7] pin */ -#define AFIO_EXTICR2_EXTI7_PF_Pos (12U) -#define AFIO_EXTICR2_EXTI7_PF_Msk (0x5U << AFIO_EXTICR2_EXTI7_PF_Pos) /*!< 0x00005000 */ -#define AFIO_EXTICR2_EXTI7_PF AFIO_EXTICR2_EXTI7_PF_Msk /*!< PF[7] pin */ -#define AFIO_EXTICR2_EXTI7_PG_Pos (13U) -#define AFIO_EXTICR2_EXTI7_PG_Msk (0x3U << AFIO_EXTICR2_EXTI7_PG_Pos) /*!< 0x00006000 */ -#define AFIO_EXTICR2_EXTI7_PG AFIO_EXTICR2_EXTI7_PG_Msk /*!< PG[7] pin */ - -/***************** Bit definition for AFIO_EXTICR3 register *****************/ -#define AFIO_EXTICR3_EXTI8_Pos (0U) -#define AFIO_EXTICR3_EXTI8_Msk (0xFU << AFIO_EXTICR3_EXTI8_Pos) /*!< 0x0000000F */ -#define AFIO_EXTICR3_EXTI8 AFIO_EXTICR3_EXTI8_Msk /*!< EXTI 8 configuration */ -#define AFIO_EXTICR3_EXTI9_Pos (4U) -#define AFIO_EXTICR3_EXTI9_Msk (0xFU << AFIO_EXTICR3_EXTI9_Pos) /*!< 0x000000F0 */ -#define AFIO_EXTICR3_EXTI9 AFIO_EXTICR3_EXTI9_Msk /*!< EXTI 9 configuration */ -#define AFIO_EXTICR3_EXTI10_Pos (8U) -#define AFIO_EXTICR3_EXTI10_Msk (0xFU << AFIO_EXTICR3_EXTI10_Pos) /*!< 0x00000F00 */ -#define AFIO_EXTICR3_EXTI10 AFIO_EXTICR3_EXTI10_Msk /*!< EXTI 10 configuration */ -#define AFIO_EXTICR3_EXTI11_Pos (12U) -#define AFIO_EXTICR3_EXTI11_Msk (0xFU << AFIO_EXTICR3_EXTI11_Pos) /*!< 0x0000F000 */ -#define AFIO_EXTICR3_EXTI11 AFIO_EXTICR3_EXTI11_Msk /*!< EXTI 11 configuration */ - -/*!< EXTI8 configuration */ -#define AFIO_EXTICR3_EXTI8_PA ((uint32_t)0x00000000) /*!< PA[8] pin */ -#define AFIO_EXTICR3_EXTI8_PB_Pos (0U) -#define AFIO_EXTICR3_EXTI8_PB_Msk (0x1U << AFIO_EXTICR3_EXTI8_PB_Pos) /*!< 0x00000001 */ -#define AFIO_EXTICR3_EXTI8_PB AFIO_EXTICR3_EXTI8_PB_Msk /*!< PB[8] pin */ -#define AFIO_EXTICR3_EXTI8_PC_Pos (1U) -#define AFIO_EXTICR3_EXTI8_PC_Msk (0x1U << AFIO_EXTICR3_EXTI8_PC_Pos) /*!< 0x00000002 */ -#define AFIO_EXTICR3_EXTI8_PC AFIO_EXTICR3_EXTI8_PC_Msk /*!< PC[8] pin */ -#define AFIO_EXTICR3_EXTI8_PD_Pos (0U) -#define AFIO_EXTICR3_EXTI8_PD_Msk (0x3U << AFIO_EXTICR3_EXTI8_PD_Pos) /*!< 0x00000003 */ -#define AFIO_EXTICR3_EXTI8_PD AFIO_EXTICR3_EXTI8_PD_Msk /*!< PD[8] pin */ -#define AFIO_EXTICR3_EXTI8_PE_Pos (2U) -#define AFIO_EXTICR3_EXTI8_PE_Msk (0x1U << AFIO_EXTICR3_EXTI8_PE_Pos) /*!< 0x00000004 */ -#define AFIO_EXTICR3_EXTI8_PE AFIO_EXTICR3_EXTI8_PE_Msk /*!< PE[8] pin */ -#define AFIO_EXTICR3_EXTI8_PF_Pos (0U) -#define AFIO_EXTICR3_EXTI8_PF_Msk (0x5U << AFIO_EXTICR3_EXTI8_PF_Pos) /*!< 0x00000005 */ -#define AFIO_EXTICR3_EXTI8_PF AFIO_EXTICR3_EXTI8_PF_Msk /*!< PF[8] pin */ -#define AFIO_EXTICR3_EXTI8_PG_Pos (1U) -#define AFIO_EXTICR3_EXTI8_PG_Msk (0x3U << AFIO_EXTICR3_EXTI8_PG_Pos) /*!< 0x00000006 */ -#define AFIO_EXTICR3_EXTI8_PG AFIO_EXTICR3_EXTI8_PG_Msk /*!< PG[8] pin */ - -/*!< EXTI9 configuration */ -#define AFIO_EXTICR3_EXTI9_PA ((uint32_t)0x00000000) /*!< PA[9] pin */ -#define AFIO_EXTICR3_EXTI9_PB_Pos (4U) -#define AFIO_EXTICR3_EXTI9_PB_Msk (0x1U << AFIO_EXTICR3_EXTI9_PB_Pos) /*!< 0x00000010 */ -#define AFIO_EXTICR3_EXTI9_PB AFIO_EXTICR3_EXTI9_PB_Msk /*!< PB[9] pin */ -#define AFIO_EXTICR3_EXTI9_PC_Pos (5U) -#define AFIO_EXTICR3_EXTI9_PC_Msk (0x1U << AFIO_EXTICR3_EXTI9_PC_Pos) /*!< 0x00000020 */ -#define AFIO_EXTICR3_EXTI9_PC AFIO_EXTICR3_EXTI9_PC_Msk /*!< PC[9] pin */ -#define AFIO_EXTICR3_EXTI9_PD_Pos (4U) -#define AFIO_EXTICR3_EXTI9_PD_Msk (0x3U << AFIO_EXTICR3_EXTI9_PD_Pos) /*!< 0x00000030 */ -#define AFIO_EXTICR3_EXTI9_PD AFIO_EXTICR3_EXTI9_PD_Msk /*!< PD[9] pin */ -#define AFIO_EXTICR3_EXTI9_PE_Pos (6U) -#define AFIO_EXTICR3_EXTI9_PE_Msk (0x1U << AFIO_EXTICR3_EXTI9_PE_Pos) /*!< 0x00000040 */ -#define AFIO_EXTICR3_EXTI9_PE AFIO_EXTICR3_EXTI9_PE_Msk /*!< PE[9] pin */ -#define AFIO_EXTICR3_EXTI9_PF_Pos (4U) -#define AFIO_EXTICR3_EXTI9_PF_Msk (0x5U << AFIO_EXTICR3_EXTI9_PF_Pos) /*!< 0x00000050 */ -#define AFIO_EXTICR3_EXTI9_PF AFIO_EXTICR3_EXTI9_PF_Msk /*!< PF[9] pin */ -#define AFIO_EXTICR3_EXTI9_PG_Pos (5U) -#define AFIO_EXTICR3_EXTI9_PG_Msk (0x3U << AFIO_EXTICR3_EXTI9_PG_Pos) /*!< 0x00000060 */ -#define AFIO_EXTICR3_EXTI9_PG AFIO_EXTICR3_EXTI9_PG_Msk /*!< PG[9] pin */ - -/*!< EXTI10 configuration */ -#define AFIO_EXTICR3_EXTI10_PA ((uint32_t)0x00000000) /*!< PA[10] pin */ -#define AFIO_EXTICR3_EXTI10_PB_Pos (8U) -#define AFIO_EXTICR3_EXTI10_PB_Msk (0x1U << AFIO_EXTICR3_EXTI10_PB_Pos) /*!< 0x00000100 */ -#define AFIO_EXTICR3_EXTI10_PB AFIO_EXTICR3_EXTI10_PB_Msk /*!< PB[10] pin */ -#define AFIO_EXTICR3_EXTI10_PC_Pos (9U) -#define AFIO_EXTICR3_EXTI10_PC_Msk (0x1U << AFIO_EXTICR3_EXTI10_PC_Pos) /*!< 0x00000200 */ -#define AFIO_EXTICR3_EXTI10_PC AFIO_EXTICR3_EXTI10_PC_Msk /*!< PC[10] pin */ -#define AFIO_EXTICR3_EXTI10_PD_Pos (8U) -#define AFIO_EXTICR3_EXTI10_PD_Msk (0x3U << AFIO_EXTICR3_EXTI10_PD_Pos) /*!< 0x00000300 */ -#define AFIO_EXTICR3_EXTI10_PD AFIO_EXTICR3_EXTI10_PD_Msk /*!< PD[10] pin */ -#define AFIO_EXTICR3_EXTI10_PE_Pos (10U) -#define AFIO_EXTICR3_EXTI10_PE_Msk (0x1U << AFIO_EXTICR3_EXTI10_PE_Pos) /*!< 0x00000400 */ -#define AFIO_EXTICR3_EXTI10_PE AFIO_EXTICR3_EXTI10_PE_Msk /*!< PE[10] pin */ -#define AFIO_EXTICR3_EXTI10_PF_Pos (8U) -#define AFIO_EXTICR3_EXTI10_PF_Msk (0x5U << AFIO_EXTICR3_EXTI10_PF_Pos) /*!< 0x00000500 */ -#define AFIO_EXTICR3_EXTI10_PF AFIO_EXTICR3_EXTI10_PF_Msk /*!< PF[10] pin */ -#define AFIO_EXTICR3_EXTI10_PG_Pos (9U) -#define AFIO_EXTICR3_EXTI10_PG_Msk (0x3U << AFIO_EXTICR3_EXTI10_PG_Pos) /*!< 0x00000600 */ -#define AFIO_EXTICR3_EXTI10_PG AFIO_EXTICR3_EXTI10_PG_Msk /*!< PG[10] pin */ - -/*!< EXTI11 configuration */ -#define AFIO_EXTICR3_EXTI11_PA ((uint32_t)0x00000000) /*!< PA[11] pin */ -#define AFIO_EXTICR3_EXTI11_PB_Pos (12U) -#define AFIO_EXTICR3_EXTI11_PB_Msk (0x1U << AFIO_EXTICR3_EXTI11_PB_Pos) /*!< 0x00001000 */ -#define AFIO_EXTICR3_EXTI11_PB AFIO_EXTICR3_EXTI11_PB_Msk /*!< PB[11] pin */ -#define AFIO_EXTICR3_EXTI11_PC_Pos (13U) -#define AFIO_EXTICR3_EXTI11_PC_Msk (0x1U << AFIO_EXTICR3_EXTI11_PC_Pos) /*!< 0x00002000 */ -#define AFIO_EXTICR3_EXTI11_PC AFIO_EXTICR3_EXTI11_PC_Msk /*!< PC[11] pin */ -#define AFIO_EXTICR3_EXTI11_PD_Pos (12U) -#define AFIO_EXTICR3_EXTI11_PD_Msk (0x3U << AFIO_EXTICR3_EXTI11_PD_Pos) /*!< 0x00003000 */ -#define AFIO_EXTICR3_EXTI11_PD AFIO_EXTICR3_EXTI11_PD_Msk /*!< PD[11] pin */ -#define AFIO_EXTICR3_EXTI11_PE_Pos (14U) -#define AFIO_EXTICR3_EXTI11_PE_Msk (0x1U << AFIO_EXTICR3_EXTI11_PE_Pos) /*!< 0x00004000 */ -#define AFIO_EXTICR3_EXTI11_PE AFIO_EXTICR3_EXTI11_PE_Msk /*!< PE[11] pin */ -#define AFIO_EXTICR3_EXTI11_PF_Pos (12U) -#define AFIO_EXTICR3_EXTI11_PF_Msk (0x5U << AFIO_EXTICR3_EXTI11_PF_Pos) /*!< 0x00005000 */ -#define AFIO_EXTICR3_EXTI11_PF AFIO_EXTICR3_EXTI11_PF_Msk /*!< PF[11] pin */ -#define AFIO_EXTICR3_EXTI11_PG_Pos (13U) -#define AFIO_EXTICR3_EXTI11_PG_Msk (0x3U << AFIO_EXTICR3_EXTI11_PG_Pos) /*!< 0x00006000 */ -#define AFIO_EXTICR3_EXTI11_PG AFIO_EXTICR3_EXTI11_PG_Msk /*!< PG[11] pin */ - -/***************** Bit definition for AFIO_EXTICR4 register *****************/ -#define AFIO_EXTICR4_EXTI12_Pos (0U) -#define AFIO_EXTICR4_EXTI12_Msk (0xFU << AFIO_EXTICR4_EXTI12_Pos) /*!< 0x0000000F */ -#define AFIO_EXTICR4_EXTI12 AFIO_EXTICR4_EXTI12_Msk /*!< EXTI 12 configuration */ -#define AFIO_EXTICR4_EXTI13_Pos (4U) -#define AFIO_EXTICR4_EXTI13_Msk (0xFU << AFIO_EXTICR4_EXTI13_Pos) /*!< 0x000000F0 */ -#define AFIO_EXTICR4_EXTI13 AFIO_EXTICR4_EXTI13_Msk /*!< EXTI 13 configuration */ -#define AFIO_EXTICR4_EXTI14_Pos (8U) -#define AFIO_EXTICR4_EXTI14_Msk (0xFU << AFIO_EXTICR4_EXTI14_Pos) /*!< 0x00000F00 */ -#define AFIO_EXTICR4_EXTI14 AFIO_EXTICR4_EXTI14_Msk /*!< EXTI 14 configuration */ -#define AFIO_EXTICR4_EXTI15_Pos (12U) -#define AFIO_EXTICR4_EXTI15_Msk (0xFU << AFIO_EXTICR4_EXTI15_Pos) /*!< 0x0000F000 */ -#define AFIO_EXTICR4_EXTI15 AFIO_EXTICR4_EXTI15_Msk /*!< EXTI 15 configuration */ - -/* EXTI12 configuration */ -#define AFIO_EXTICR4_EXTI12_PA ((uint32_t)0x00000000) /*!< PA[12] pin */ -#define AFIO_EXTICR4_EXTI12_PB_Pos (0U) -#define AFIO_EXTICR4_EXTI12_PB_Msk (0x1U << AFIO_EXTICR4_EXTI12_PB_Pos) /*!< 0x00000001 */ -#define AFIO_EXTICR4_EXTI12_PB AFIO_EXTICR4_EXTI12_PB_Msk /*!< PB[12] pin */ -#define AFIO_EXTICR4_EXTI12_PC_Pos (1U) -#define AFIO_EXTICR4_EXTI12_PC_Msk (0x1U << AFIO_EXTICR4_EXTI12_PC_Pos) /*!< 0x00000002 */ -#define AFIO_EXTICR4_EXTI12_PC AFIO_EXTICR4_EXTI12_PC_Msk /*!< PC[12] pin */ -#define AFIO_EXTICR4_EXTI12_PD_Pos (0U) -#define AFIO_EXTICR4_EXTI12_PD_Msk (0x3U << AFIO_EXTICR4_EXTI12_PD_Pos) /*!< 0x00000003 */ -#define AFIO_EXTICR4_EXTI12_PD AFIO_EXTICR4_EXTI12_PD_Msk /*!< PD[12] pin */ -#define AFIO_EXTICR4_EXTI12_PE_Pos (2U) -#define AFIO_EXTICR4_EXTI12_PE_Msk (0x1U << AFIO_EXTICR4_EXTI12_PE_Pos) /*!< 0x00000004 */ -#define AFIO_EXTICR4_EXTI12_PE AFIO_EXTICR4_EXTI12_PE_Msk /*!< PE[12] pin */ -#define AFIO_EXTICR4_EXTI12_PF_Pos (0U) -#define AFIO_EXTICR4_EXTI12_PF_Msk (0x5U << AFIO_EXTICR4_EXTI12_PF_Pos) /*!< 0x00000005 */ -#define AFIO_EXTICR4_EXTI12_PF AFIO_EXTICR4_EXTI12_PF_Msk /*!< PF[12] pin */ -#define AFIO_EXTICR4_EXTI12_PG_Pos (1U) -#define AFIO_EXTICR4_EXTI12_PG_Msk (0x3U << AFIO_EXTICR4_EXTI12_PG_Pos) /*!< 0x00000006 */ -#define AFIO_EXTICR4_EXTI12_PG AFIO_EXTICR4_EXTI12_PG_Msk /*!< PG[12] pin */ - -/* EXTI13 configuration */ -#define AFIO_EXTICR4_EXTI13_PA ((uint32_t)0x00000000) /*!< PA[13] pin */ -#define AFIO_EXTICR4_EXTI13_PB_Pos (4U) -#define AFIO_EXTICR4_EXTI13_PB_Msk (0x1U << AFIO_EXTICR4_EXTI13_PB_Pos) /*!< 0x00000010 */ -#define AFIO_EXTICR4_EXTI13_PB AFIO_EXTICR4_EXTI13_PB_Msk /*!< PB[13] pin */ -#define AFIO_EXTICR4_EXTI13_PC_Pos (5U) -#define AFIO_EXTICR4_EXTI13_PC_Msk (0x1U << AFIO_EXTICR4_EXTI13_PC_Pos) /*!< 0x00000020 */ -#define AFIO_EXTICR4_EXTI13_PC AFIO_EXTICR4_EXTI13_PC_Msk /*!< PC[13] pin */ -#define AFIO_EXTICR4_EXTI13_PD_Pos (4U) -#define AFIO_EXTICR4_EXTI13_PD_Msk (0x3U << AFIO_EXTICR4_EXTI13_PD_Pos) /*!< 0x00000030 */ -#define AFIO_EXTICR4_EXTI13_PD AFIO_EXTICR4_EXTI13_PD_Msk /*!< PD[13] pin */ -#define AFIO_EXTICR4_EXTI13_PE_Pos (6U) -#define AFIO_EXTICR4_EXTI13_PE_Msk (0x1U << AFIO_EXTICR4_EXTI13_PE_Pos) /*!< 0x00000040 */ -#define AFIO_EXTICR4_EXTI13_PE AFIO_EXTICR4_EXTI13_PE_Msk /*!< PE[13] pin */ -#define AFIO_EXTICR4_EXTI13_PF_Pos (4U) -#define AFIO_EXTICR4_EXTI13_PF_Msk (0x5U << AFIO_EXTICR4_EXTI13_PF_Pos) /*!< 0x00000050 */ -#define AFIO_EXTICR4_EXTI13_PF AFIO_EXTICR4_EXTI13_PF_Msk /*!< PF[13] pin */ -#define AFIO_EXTICR4_EXTI13_PG_Pos (5U) -#define AFIO_EXTICR4_EXTI13_PG_Msk (0x3U << AFIO_EXTICR4_EXTI13_PG_Pos) /*!< 0x00000060 */ -#define AFIO_EXTICR4_EXTI13_PG AFIO_EXTICR4_EXTI13_PG_Msk /*!< PG[13] pin */ - -/*!< EXTI14 configuration */ -#define AFIO_EXTICR4_EXTI14_PA ((uint32_t)0x00000000) /*!< PA[14] pin */ -#define AFIO_EXTICR4_EXTI14_PB_Pos (8U) -#define AFIO_EXTICR4_EXTI14_PB_Msk (0x1U << AFIO_EXTICR4_EXTI14_PB_Pos) /*!< 0x00000100 */ -#define AFIO_EXTICR4_EXTI14_PB AFIO_EXTICR4_EXTI14_PB_Msk /*!< PB[14] pin */ -#define AFIO_EXTICR4_EXTI14_PC_Pos (9U) -#define AFIO_EXTICR4_EXTI14_PC_Msk (0x1U << AFIO_EXTICR4_EXTI14_PC_Pos) /*!< 0x00000200 */ -#define AFIO_EXTICR4_EXTI14_PC AFIO_EXTICR4_EXTI14_PC_Msk /*!< PC[14] pin */ -#define AFIO_EXTICR4_EXTI14_PD_Pos (8U) -#define AFIO_EXTICR4_EXTI14_PD_Msk (0x3U << AFIO_EXTICR4_EXTI14_PD_Pos) /*!< 0x00000300 */ -#define AFIO_EXTICR4_EXTI14_PD AFIO_EXTICR4_EXTI14_PD_Msk /*!< PD[14] pin */ -#define AFIO_EXTICR4_EXTI14_PE_Pos (10U) -#define AFIO_EXTICR4_EXTI14_PE_Msk (0x1U << AFIO_EXTICR4_EXTI14_PE_Pos) /*!< 0x00000400 */ -#define AFIO_EXTICR4_EXTI14_PE AFIO_EXTICR4_EXTI14_PE_Msk /*!< PE[14] pin */ -#define AFIO_EXTICR4_EXTI14_PF_Pos (8U) -#define AFIO_EXTICR4_EXTI14_PF_Msk (0x5U << AFIO_EXTICR4_EXTI14_PF_Pos) /*!< 0x00000500 */ -#define AFIO_EXTICR4_EXTI14_PF AFIO_EXTICR4_EXTI14_PF_Msk /*!< PF[14] pin */ -#define AFIO_EXTICR4_EXTI14_PG_Pos (9U) -#define AFIO_EXTICR4_EXTI14_PG_Msk (0x3U << AFIO_EXTICR4_EXTI14_PG_Pos) /*!< 0x00000600 */ -#define AFIO_EXTICR4_EXTI14_PG AFIO_EXTICR4_EXTI14_PG_Msk /*!< PG[14] pin */ - -/*!< EXTI15 configuration */ -#define AFIO_EXTICR4_EXTI15_PA ((uint32_t)0x00000000) /*!< PA[15] pin */ -#define AFIO_EXTICR4_EXTI15_PB_Pos (12U) -#define AFIO_EXTICR4_EXTI15_PB_Msk (0x1U << AFIO_EXTICR4_EXTI15_PB_Pos) /*!< 0x00001000 */ -#define AFIO_EXTICR4_EXTI15_PB AFIO_EXTICR4_EXTI15_PB_Msk /*!< PB[15] pin */ -#define AFIO_EXTICR4_EXTI15_PC_Pos (13U) -#define AFIO_EXTICR4_EXTI15_PC_Msk (0x1U << AFIO_EXTICR4_EXTI15_PC_Pos) /*!< 0x00002000 */ -#define AFIO_EXTICR4_EXTI15_PC AFIO_EXTICR4_EXTI15_PC_Msk /*!< PC[15] pin */ -#define AFIO_EXTICR4_EXTI15_PD_Pos (12U) -#define AFIO_EXTICR4_EXTI15_PD_Msk (0x3U << AFIO_EXTICR4_EXTI15_PD_Pos) /*!< 0x00003000 */ -#define AFIO_EXTICR4_EXTI15_PD AFIO_EXTICR4_EXTI15_PD_Msk /*!< PD[15] pin */ -#define AFIO_EXTICR4_EXTI15_PE_Pos (14U) -#define AFIO_EXTICR4_EXTI15_PE_Msk (0x1U << AFIO_EXTICR4_EXTI15_PE_Pos) /*!< 0x00004000 */ -#define AFIO_EXTICR4_EXTI15_PE AFIO_EXTICR4_EXTI15_PE_Msk /*!< PE[15] pin */ -#define AFIO_EXTICR4_EXTI15_PF_Pos (12U) -#define AFIO_EXTICR4_EXTI15_PF_Msk (0x5U << AFIO_EXTICR4_EXTI15_PF_Pos) /*!< 0x00005000 */ -#define AFIO_EXTICR4_EXTI15_PF AFIO_EXTICR4_EXTI15_PF_Msk /*!< PF[15] pin */ -#define AFIO_EXTICR4_EXTI15_PG_Pos (13U) -#define AFIO_EXTICR4_EXTI15_PG_Msk (0x3U << AFIO_EXTICR4_EXTI15_PG_Pos) /*!< 0x00006000 */ -#define AFIO_EXTICR4_EXTI15_PG AFIO_EXTICR4_EXTI15_PG_Msk /*!< PG[15] pin */ - -/****************** Bit definition for AFIO_MAPR2 register ******************/ - - - -/******************************************************************************/ -/* */ -/* SystemTick */ -/* */ -/******************************************************************************/ - -/***************** Bit definition for SysTick_CTRL register *****************/ -#define SysTick_CTRL_ENABLE ((uint32_t)0x00000001) /*!< Counter enable */ -#define SysTick_CTRL_TICKINT ((uint32_t)0x00000002) /*!< Counting down to 0 pends the SysTick handler */ -#define SysTick_CTRL_CLKSOURCE ((uint32_t)0x00000004) /*!< Clock source */ -#define SysTick_CTRL_COUNTFLAG ((uint32_t)0x00010000) /*!< Count Flag */ - -/***************** Bit definition for SysTick_LOAD register *****************/ -#define SysTick_LOAD_RELOAD ((uint32_t)0x00FFFFFF) /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */ - -/***************** Bit definition for SysTick_VAL register ******************/ -#define SysTick_VAL_CURRENT ((uint32_t)0x00FFFFFF) /*!< Current value at the time the register is accessed */ - -/***************** Bit definition for SysTick_CALIB register ****************/ -#define SysTick_CALIB_TENMS ((uint32_t)0x00FFFFFF) /*!< Reload value to use for 10ms timing */ -#define SysTick_CALIB_SKEW ((uint32_t)0x40000000) /*!< Calibration value is not exactly 10 ms */ -#define SysTick_CALIB_NOREF ((uint32_t)0x80000000) /*!< The reference clock is not provided */ - -/******************************************************************************/ -/* */ -/* Nested Vectored Interrupt Controller */ -/* */ -/******************************************************************************/ - -/****************** Bit definition for NVIC_ISER register *******************/ -#define NVIC_ISER_SETENA_Pos (0U) -#define NVIC_ISER_SETENA_Msk (0xFFFFFFFFU << NVIC_ISER_SETENA_Pos) /*!< 0xFFFFFFFF */ -#define NVIC_ISER_SETENA NVIC_ISER_SETENA_Msk /*!< Interrupt set enable bits */ -#define NVIC_ISER_SETENA_0 (0x00000001U << NVIC_ISER_SETENA_Pos) /*!< 0x00000001 */ -#define NVIC_ISER_SETENA_1 (0x00000002U << NVIC_ISER_SETENA_Pos) /*!< 0x00000002 */ -#define NVIC_ISER_SETENA_2 (0x00000004U << NVIC_ISER_SETENA_Pos) /*!< 0x00000004 */ -#define NVIC_ISER_SETENA_3 (0x00000008U << NVIC_ISER_SETENA_Pos) /*!< 0x00000008 */ -#define NVIC_ISER_SETENA_4 (0x00000010U << NVIC_ISER_SETENA_Pos) /*!< 0x00000010 */ -#define NVIC_ISER_SETENA_5 (0x00000020U << NVIC_ISER_SETENA_Pos) /*!< 0x00000020 */ -#define NVIC_ISER_SETENA_6 (0x00000040U << NVIC_ISER_SETENA_Pos) /*!< 0x00000040 */ -#define NVIC_ISER_SETENA_7 (0x00000080U << NVIC_ISER_SETENA_Pos) /*!< 0x00000080 */ -#define NVIC_ISER_SETENA_8 (0x00000100U << NVIC_ISER_SETENA_Pos) /*!< 0x00000100 */ -#define NVIC_ISER_SETENA_9 (0x00000200U << NVIC_ISER_SETENA_Pos) /*!< 0x00000200 */ -#define NVIC_ISER_SETENA_10 (0x00000400U << NVIC_ISER_SETENA_Pos) /*!< 0x00000400 */ -#define NVIC_ISER_SETENA_11 (0x00000800U << NVIC_ISER_SETENA_Pos) /*!< 0x00000800 */ -#define NVIC_ISER_SETENA_12 (0x00001000U << NVIC_ISER_SETENA_Pos) /*!< 0x00001000 */ -#define NVIC_ISER_SETENA_13 (0x00002000U << NVIC_ISER_SETENA_Pos) /*!< 0x00002000 */ -#define NVIC_ISER_SETENA_14 (0x00004000U << NVIC_ISER_SETENA_Pos) /*!< 0x00004000 */ -#define NVIC_ISER_SETENA_15 (0x00008000U << NVIC_ISER_SETENA_Pos) /*!< 0x00008000 */ -#define NVIC_ISER_SETENA_16 (0x00010000U << NVIC_ISER_SETENA_Pos) /*!< 0x00010000 */ -#define NVIC_ISER_SETENA_17 (0x00020000U << NVIC_ISER_SETENA_Pos) /*!< 0x00020000 */ -#define NVIC_ISER_SETENA_18 (0x00040000U << NVIC_ISER_SETENA_Pos) /*!< 0x00040000 */ -#define NVIC_ISER_SETENA_19 (0x00080000U << NVIC_ISER_SETENA_Pos) /*!< 0x00080000 */ -#define NVIC_ISER_SETENA_20 (0x00100000U << NVIC_ISER_SETENA_Pos) /*!< 0x00100000 */ -#define NVIC_ISER_SETENA_21 (0x00200000U << NVIC_ISER_SETENA_Pos) /*!< 0x00200000 */ -#define NVIC_ISER_SETENA_22 (0x00400000U << NVIC_ISER_SETENA_Pos) /*!< 0x00400000 */ -#define NVIC_ISER_SETENA_23 (0x00800000U << NVIC_ISER_SETENA_Pos) /*!< 0x00800000 */ -#define NVIC_ISER_SETENA_24 (0x01000000U << NVIC_ISER_SETENA_Pos) /*!< 0x01000000 */ -#define NVIC_ISER_SETENA_25 (0x02000000U << NVIC_ISER_SETENA_Pos) /*!< 0x02000000 */ -#define NVIC_ISER_SETENA_26 (0x04000000U << NVIC_ISER_SETENA_Pos) /*!< 0x04000000 */ -#define NVIC_ISER_SETENA_27 (0x08000000U << NVIC_ISER_SETENA_Pos) /*!< 0x08000000 */ -#define NVIC_ISER_SETENA_28 (0x10000000U << NVIC_ISER_SETENA_Pos) /*!< 0x10000000 */ -#define NVIC_ISER_SETENA_29 (0x20000000U << NVIC_ISER_SETENA_Pos) /*!< 0x20000000 */ -#define NVIC_ISER_SETENA_30 (0x40000000U << NVIC_ISER_SETENA_Pos) /*!< 0x40000000 */ -#define NVIC_ISER_SETENA_31 (0x80000000U << NVIC_ISER_SETENA_Pos) /*!< 0x80000000 */ - -/****************** Bit definition for NVIC_ICER register *******************/ -#define NVIC_ICER_CLRENA_Pos (0U) -#define NVIC_ICER_CLRENA_Msk (0xFFFFFFFFU << NVIC_ICER_CLRENA_Pos) /*!< 0xFFFFFFFF */ -#define NVIC_ICER_CLRENA NVIC_ICER_CLRENA_Msk /*!< Interrupt clear-enable bits */ -#define NVIC_ICER_CLRENA_0 (0x00000001U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000001 */ -#define NVIC_ICER_CLRENA_1 (0x00000002U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000002 */ -#define NVIC_ICER_CLRENA_2 (0x00000004U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000004 */ -#define NVIC_ICER_CLRENA_3 (0x00000008U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000008 */ -#define NVIC_ICER_CLRENA_4 (0x00000010U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000010 */ -#define NVIC_ICER_CLRENA_5 (0x00000020U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000020 */ -#define NVIC_ICER_CLRENA_6 (0x00000040U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000040 */ -#define NVIC_ICER_CLRENA_7 (0x00000080U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000080 */ -#define NVIC_ICER_CLRENA_8 (0x00000100U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000100 */ -#define NVIC_ICER_CLRENA_9 (0x00000200U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000200 */ -#define NVIC_ICER_CLRENA_10 (0x00000400U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000400 */ -#define NVIC_ICER_CLRENA_11 (0x00000800U << NVIC_ICER_CLRENA_Pos) /*!< 0x00000800 */ -#define NVIC_ICER_CLRENA_12 (0x00001000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00001000 */ -#define NVIC_ICER_CLRENA_13 (0x00002000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00002000 */ -#define NVIC_ICER_CLRENA_14 (0x00004000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00004000 */ -#define NVIC_ICER_CLRENA_15 (0x00008000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00008000 */ -#define NVIC_ICER_CLRENA_16 (0x00010000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00010000 */ -#define NVIC_ICER_CLRENA_17 (0x00020000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00020000 */ -#define NVIC_ICER_CLRENA_18 (0x00040000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00040000 */ -#define NVIC_ICER_CLRENA_19 (0x00080000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00080000 */ -#define NVIC_ICER_CLRENA_20 (0x00100000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00100000 */ -#define NVIC_ICER_CLRENA_21 (0x00200000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00200000 */ -#define NVIC_ICER_CLRENA_22 (0x00400000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00400000 */ -#define NVIC_ICER_CLRENA_23 (0x00800000U << NVIC_ICER_CLRENA_Pos) /*!< 0x00800000 */ -#define NVIC_ICER_CLRENA_24 (0x01000000U << NVIC_ICER_CLRENA_Pos) /*!< 0x01000000 */ -#define NVIC_ICER_CLRENA_25 (0x02000000U << NVIC_ICER_CLRENA_Pos) /*!< 0x02000000 */ -#define NVIC_ICER_CLRENA_26 (0x04000000U << NVIC_ICER_CLRENA_Pos) /*!< 0x04000000 */ -#define NVIC_ICER_CLRENA_27 (0x08000000U << NVIC_ICER_CLRENA_Pos) /*!< 0x08000000 */ -#define NVIC_ICER_CLRENA_28 (0x10000000U << NVIC_ICER_CLRENA_Pos) /*!< 0x10000000 */ -#define NVIC_ICER_CLRENA_29 (0x20000000U << NVIC_ICER_CLRENA_Pos) /*!< 0x20000000 */ -#define NVIC_ICER_CLRENA_30 (0x40000000U << NVIC_ICER_CLRENA_Pos) /*!< 0x40000000 */ -#define NVIC_ICER_CLRENA_31 (0x80000000U << NVIC_ICER_CLRENA_Pos) /*!< 0x80000000 */ - -/****************** Bit definition for NVIC_ISPR register *******************/ -#define NVIC_ISPR_SETPEND_Pos (0U) -#define NVIC_ISPR_SETPEND_Msk (0xFFFFFFFFU << NVIC_ISPR_SETPEND_Pos) /*!< 0xFFFFFFFF */ -#define NVIC_ISPR_SETPEND NVIC_ISPR_SETPEND_Msk /*!< Interrupt set-pending bits */ -#define NVIC_ISPR_SETPEND_0 (0x00000001U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000001 */ -#define NVIC_ISPR_SETPEND_1 (0x00000002U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000002 */ -#define NVIC_ISPR_SETPEND_2 (0x00000004U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000004 */ -#define NVIC_ISPR_SETPEND_3 (0x00000008U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000008 */ -#define NVIC_ISPR_SETPEND_4 (0x00000010U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000010 */ -#define NVIC_ISPR_SETPEND_5 (0x00000020U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000020 */ -#define NVIC_ISPR_SETPEND_6 (0x00000040U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000040 */ -#define NVIC_ISPR_SETPEND_7 (0x00000080U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000080 */ -#define NVIC_ISPR_SETPEND_8 (0x00000100U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000100 */ -#define NVIC_ISPR_SETPEND_9 (0x00000200U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000200 */ -#define NVIC_ISPR_SETPEND_10 (0x00000400U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000400 */ -#define NVIC_ISPR_SETPEND_11 (0x00000800U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00000800 */ -#define NVIC_ISPR_SETPEND_12 (0x00001000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00001000 */ -#define NVIC_ISPR_SETPEND_13 (0x00002000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00002000 */ -#define NVIC_ISPR_SETPEND_14 (0x00004000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00004000 */ -#define NVIC_ISPR_SETPEND_15 (0x00008000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00008000 */ -#define NVIC_ISPR_SETPEND_16 (0x00010000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00010000 */ -#define NVIC_ISPR_SETPEND_17 (0x00020000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00020000 */ -#define NVIC_ISPR_SETPEND_18 (0x00040000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00040000 */ -#define NVIC_ISPR_SETPEND_19 (0x00080000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00080000 */ -#define NVIC_ISPR_SETPEND_20 (0x00100000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00100000 */ -#define NVIC_ISPR_SETPEND_21 (0x00200000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00200000 */ -#define NVIC_ISPR_SETPEND_22 (0x00400000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00400000 */ -#define NVIC_ISPR_SETPEND_23 (0x00800000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x00800000 */ -#define NVIC_ISPR_SETPEND_24 (0x01000000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x01000000 */ -#define NVIC_ISPR_SETPEND_25 (0x02000000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x02000000 */ -#define NVIC_ISPR_SETPEND_26 (0x04000000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x04000000 */ -#define NVIC_ISPR_SETPEND_27 (0x08000000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x08000000 */ -#define NVIC_ISPR_SETPEND_28 (0x10000000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x10000000 */ -#define NVIC_ISPR_SETPEND_29 (0x20000000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x20000000 */ -#define NVIC_ISPR_SETPEND_30 (0x40000000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x40000000 */ -#define NVIC_ISPR_SETPEND_31 (0x80000000U << NVIC_ISPR_SETPEND_Pos) /*!< 0x80000000 */ - -/****************** Bit definition for NVIC_ICPR register *******************/ -#define NVIC_ICPR_CLRPEND_Pos (0U) -#define NVIC_ICPR_CLRPEND_Msk (0xFFFFFFFFU << NVIC_ICPR_CLRPEND_Pos) /*!< 0xFFFFFFFF */ -#define NVIC_ICPR_CLRPEND NVIC_ICPR_CLRPEND_Msk /*!< Interrupt clear-pending bits */ -#define NVIC_ICPR_CLRPEND_0 (0x00000001U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000001 */ -#define NVIC_ICPR_CLRPEND_1 (0x00000002U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000002 */ -#define NVIC_ICPR_CLRPEND_2 (0x00000004U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000004 */ -#define NVIC_ICPR_CLRPEND_3 (0x00000008U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000008 */ -#define NVIC_ICPR_CLRPEND_4 (0x00000010U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000010 */ -#define NVIC_ICPR_CLRPEND_5 (0x00000020U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000020 */ -#define NVIC_ICPR_CLRPEND_6 (0x00000040U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000040 */ -#define NVIC_ICPR_CLRPEND_7 (0x00000080U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000080 */ -#define NVIC_ICPR_CLRPEND_8 (0x00000100U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000100 */ -#define NVIC_ICPR_CLRPEND_9 (0x00000200U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000200 */ -#define NVIC_ICPR_CLRPEND_10 (0x00000400U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000400 */ -#define NVIC_ICPR_CLRPEND_11 (0x00000800U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00000800 */ -#define NVIC_ICPR_CLRPEND_12 (0x00001000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00001000 */ -#define NVIC_ICPR_CLRPEND_13 (0x00002000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00002000 */ -#define NVIC_ICPR_CLRPEND_14 (0x00004000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00004000 */ -#define NVIC_ICPR_CLRPEND_15 (0x00008000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00008000 */ -#define NVIC_ICPR_CLRPEND_16 (0x00010000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00010000 */ -#define NVIC_ICPR_CLRPEND_17 (0x00020000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00020000 */ -#define NVIC_ICPR_CLRPEND_18 (0x00040000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00040000 */ -#define NVIC_ICPR_CLRPEND_19 (0x00080000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00080000 */ -#define NVIC_ICPR_CLRPEND_20 (0x00100000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00100000 */ -#define NVIC_ICPR_CLRPEND_21 (0x00200000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00200000 */ -#define NVIC_ICPR_CLRPEND_22 (0x00400000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00400000 */ -#define NVIC_ICPR_CLRPEND_23 (0x00800000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x00800000 */ -#define NVIC_ICPR_CLRPEND_24 (0x01000000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x01000000 */ -#define NVIC_ICPR_CLRPEND_25 (0x02000000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x02000000 */ -#define NVIC_ICPR_CLRPEND_26 (0x04000000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x04000000 */ -#define NVIC_ICPR_CLRPEND_27 (0x08000000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x08000000 */ -#define NVIC_ICPR_CLRPEND_28 (0x10000000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x10000000 */ -#define NVIC_ICPR_CLRPEND_29 (0x20000000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x20000000 */ -#define NVIC_ICPR_CLRPEND_30 (0x40000000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x40000000 */ -#define NVIC_ICPR_CLRPEND_31 (0x80000000U << NVIC_ICPR_CLRPEND_Pos) /*!< 0x80000000 */ - -/****************** Bit definition for NVIC_IABR register *******************/ -#define NVIC_IABR_ACTIVE_Pos (0U) -#define NVIC_IABR_ACTIVE_Msk (0xFFFFFFFFU << NVIC_IABR_ACTIVE_Pos) /*!< 0xFFFFFFFF */ -#define NVIC_IABR_ACTIVE NVIC_IABR_ACTIVE_Msk /*!< Interrupt active flags */ -#define NVIC_IABR_ACTIVE_0 (0x00000001U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000001 */ -#define NVIC_IABR_ACTIVE_1 (0x00000002U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000002 */ -#define NVIC_IABR_ACTIVE_2 (0x00000004U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000004 */ -#define NVIC_IABR_ACTIVE_3 (0x00000008U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000008 */ -#define NVIC_IABR_ACTIVE_4 (0x00000010U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000010 */ -#define NVIC_IABR_ACTIVE_5 (0x00000020U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000020 */ -#define NVIC_IABR_ACTIVE_6 (0x00000040U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000040 */ -#define NVIC_IABR_ACTIVE_7 (0x00000080U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000080 */ -#define NVIC_IABR_ACTIVE_8 (0x00000100U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000100 */ -#define NVIC_IABR_ACTIVE_9 (0x00000200U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000200 */ -#define NVIC_IABR_ACTIVE_10 (0x00000400U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000400 */ -#define NVIC_IABR_ACTIVE_11 (0x00000800U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00000800 */ -#define NVIC_IABR_ACTIVE_12 (0x00001000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00001000 */ -#define NVIC_IABR_ACTIVE_13 (0x00002000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00002000 */ -#define NVIC_IABR_ACTIVE_14 (0x00004000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00004000 */ -#define NVIC_IABR_ACTIVE_15 (0x00008000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00008000 */ -#define NVIC_IABR_ACTIVE_16 (0x00010000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00010000 */ -#define NVIC_IABR_ACTIVE_17 (0x00020000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00020000 */ -#define NVIC_IABR_ACTIVE_18 (0x00040000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00040000 */ -#define NVIC_IABR_ACTIVE_19 (0x00080000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00080000 */ -#define NVIC_IABR_ACTIVE_20 (0x00100000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00100000 */ -#define NVIC_IABR_ACTIVE_21 (0x00200000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00200000 */ -#define NVIC_IABR_ACTIVE_22 (0x00400000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00400000 */ -#define NVIC_IABR_ACTIVE_23 (0x00800000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x00800000 */ -#define NVIC_IABR_ACTIVE_24 (0x01000000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x01000000 */ -#define NVIC_IABR_ACTIVE_25 (0x02000000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x02000000 */ -#define NVIC_IABR_ACTIVE_26 (0x04000000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x04000000 */ -#define NVIC_IABR_ACTIVE_27 (0x08000000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x08000000 */ -#define NVIC_IABR_ACTIVE_28 (0x10000000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x10000000 */ -#define NVIC_IABR_ACTIVE_29 (0x20000000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x20000000 */ -#define NVIC_IABR_ACTIVE_30 (0x40000000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x40000000 */ -#define NVIC_IABR_ACTIVE_31 (0x80000000U << NVIC_IABR_ACTIVE_Pos) /*!< 0x80000000 */ - -/****************** Bit definition for NVIC_PRI0 register *******************/ -#define NVIC_IPR0_PRI_0 ((uint32_t)0x000000FF) /*!< Priority of interrupt 0 */ -#define NVIC_IPR0_PRI_1 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 1 */ -#define NVIC_IPR0_PRI_2 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 2 */ -#define NVIC_IPR0_PRI_3 ((uint32_t)0xFF000000) /*!< Priority of interrupt 3 */ - -/****************** Bit definition for NVIC_PRI1 register *******************/ -#define NVIC_IPR1_PRI_4 ((uint32_t)0x000000FF) /*!< Priority of interrupt 4 */ -#define NVIC_IPR1_PRI_5 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 5 */ -#define NVIC_IPR1_PRI_6 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 6 */ -#define NVIC_IPR1_PRI_7 ((uint32_t)0xFF000000) /*!< Priority of interrupt 7 */ - -/****************** Bit definition for NVIC_PRI2 register *******************/ -#define NVIC_IPR2_PRI_8 ((uint32_t)0x000000FF) /*!< Priority of interrupt 8 */ -#define NVIC_IPR2_PRI_9 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 9 */ -#define NVIC_IPR2_PRI_10 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 10 */ -#define NVIC_IPR2_PRI_11 ((uint32_t)0xFF000000) /*!< Priority of interrupt 11 */ - -/****************** Bit definition for NVIC_PRI3 register *******************/ -#define NVIC_IPR3_PRI_12 ((uint32_t)0x000000FF) /*!< Priority of interrupt 12 */ -#define NVIC_IPR3_PRI_13 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 13 */ -#define NVIC_IPR3_PRI_14 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 14 */ -#define NVIC_IPR3_PRI_15 ((uint32_t)0xFF000000) /*!< Priority of interrupt 15 */ - -/****************** Bit definition for NVIC_PRI4 register *******************/ -#define NVIC_IPR4_PRI_16 ((uint32_t)0x000000FF) /*!< Priority of interrupt 16 */ -#define NVIC_IPR4_PRI_17 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 17 */ -#define NVIC_IPR4_PRI_18 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 18 */ -#define NVIC_IPR4_PRI_19 ((uint32_t)0xFF000000) /*!< Priority of interrupt 19 */ - -/****************** Bit definition for NVIC_PRI5 register *******************/ -#define NVIC_IPR5_PRI_20 ((uint32_t)0x000000FF) /*!< Priority of interrupt 20 */ -#define NVIC_IPR5_PRI_21 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 21 */ -#define NVIC_IPR5_PRI_22 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 22 */ -#define NVIC_IPR5_PRI_23 ((uint32_t)0xFF000000) /*!< Priority of interrupt 23 */ - -/****************** Bit definition for NVIC_PRI6 register *******************/ -#define NVIC_IPR6_PRI_24 ((uint32_t)0x000000FF) /*!< Priority of interrupt 24 */ -#define NVIC_IPR6_PRI_25 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 25 */ -#define NVIC_IPR6_PRI_26 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 26 */ -#define NVIC_IPR6_PRI_27 ((uint32_t)0xFF000000) /*!< Priority of interrupt 27 */ - -/****************** Bit definition for NVIC_PRI7 register *******************/ -#define NVIC_IPR7_PRI_28 ((uint32_t)0x000000FF) /*!< Priority of interrupt 28 */ -#define NVIC_IPR7_PRI_29 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 29 */ -#define NVIC_IPR7_PRI_30 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 30 */ -#define NVIC_IPR7_PRI_31 ((uint32_t)0xFF000000) /*!< Priority of interrupt 31 */ - -/****************** Bit definition for SCB_CPUID register *******************/ -#define SCB_CPUID_REVISION ((uint32_t)0x0000000F) /*!< Implementation defined revision number */ -#define SCB_CPUID_PARTNO ((uint32_t)0x0000FFF0) /*!< Number of processor within family */ -#define SCB_CPUID_Constant ((uint32_t)0x000F0000) /*!< Reads as 0x0F */ -#define SCB_CPUID_VARIANT ((uint32_t)0x00F00000) /*!< Implementation defined variant number */ -#define SCB_CPUID_IMPLEMENTER ((uint32_t)0xFF000000) /*!< Implementer code. ARM is 0x41 */ - -/******************* Bit definition for SCB_ICSR register *******************/ -#define SCB_ICSR_VECTACTIVE ((uint32_t)0x000001FF) /*!< Active ISR number field */ -#define SCB_ICSR_RETTOBASE ((uint32_t)0x00000800) /*!< All active exceptions minus the IPSR_current_exception yields the empty set */ -#define SCB_ICSR_VECTPENDING ((uint32_t)0x003FF000) /*!< Pending ISR number field */ -#define SCB_ICSR_ISRPENDING ((uint32_t)0x00400000) /*!< Interrupt pending flag */ -#define SCB_ICSR_ISRPREEMPT ((uint32_t)0x00800000) /*!< It indicates that a pending interrupt becomes active in the next running cycle */ -#define SCB_ICSR_PENDSTCLR ((uint32_t)0x02000000) /*!< Clear pending SysTick bit */ -#define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) /*!< Set pending SysTick bit */ -#define SCB_ICSR_PENDSVCLR ((uint32_t)0x08000000) /*!< Clear pending pendSV bit */ -#define SCB_ICSR_PENDSVSET ((uint32_t)0x10000000) /*!< Set pending pendSV bit */ -#define SCB_ICSR_NMIPENDSET ((uint32_t)0x80000000) /*!< Set pending NMI bit */ - -/******************* Bit definition for SCB_VTOR register *******************/ -#define SCB_VTOR_TBLOFF ((uint32_t)0x1FFFFF80) /*!< Vector table base offset field */ -#define SCB_VTOR_TBLBASE ((uint32_t)0x20000000) /*!< Table base in code(0) or RAM(1) */ - -/*!<***************** Bit definition for SCB_AIRCR register *******************/ -#define SCB_AIRCR_VECTRESET ((uint32_t)0x00000001) /*!< System Reset bit */ -#define SCB_AIRCR_VECTCLRACTIVE ((uint32_t)0x00000002) /*!< Clear active vector bit */ -#define SCB_AIRCR_SYSRESETREQ ((uint32_t)0x00000004) /*!< Requests chip control logic to generate a reset */ - -#define SCB_AIRCR_PRIGROUP ((uint32_t)0x00000700) /*!< PRIGROUP[2:0] bits (Priority group) */ -#define SCB_AIRCR_PRIGROUP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define SCB_AIRCR_PRIGROUP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define SCB_AIRCR_PRIGROUP_2 ((uint32_t)0x00000400) /*!< Bit 2 */ - -/* prority group configuration */ -#define SCB_AIRCR_PRIGROUP0 ((uint32_t)0x00000000) /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */ -#define SCB_AIRCR_PRIGROUP1 ((uint32_t)0x00000100) /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP2 ((uint32_t)0x00000200) /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP3 ((uint32_t)0x00000300) /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP4 ((uint32_t)0x00000400) /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP5 ((uint32_t)0x00000500) /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP6 ((uint32_t)0x00000600) /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP7 ((uint32_t)0x00000700) /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */ - -#define SCB_AIRCR_ENDIANESS ((uint32_t)0x00008000) /*!< Data endianness bit */ -#define SCB_AIRCR_VECTKEY ((uint32_t)0xFFFF0000) /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */ - -/******************* Bit definition for SCB_SCR register ********************/ -#define SCB_SCR_SLEEPONEXIT ((uint32_t)0x00000002) /*!< Sleep on exit bit */ -#define SCB_SCR_SLEEPDEEP ((uint32_t)0x00000004) /*!< Sleep deep bit */ -#define SCB_SCR_SEVONPEND ((uint32_t)0x00000010) /*!< Wake up from WFE */ - -/******************** Bit definition for SCB_CCR register *******************/ -#define SCB_CCR_NONBASETHRDENA ((uint32_t)0x00000001) /*!< Thread mode can be entered from any level in Handler mode by controlled return value */ -#define SCB_CCR_USERSETMPEND ((uint32_t)0x00000002) /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */ -#define SCB_CCR_UNALIGN_TRP ((uint32_t)0x00000008) /*!< Trap for unaligned access */ -#define SCB_CCR_DIV_0_TRP ((uint32_t)0x00000010) /*!< Trap on Divide by 0 */ -#define SCB_CCR_BFHFNMIGN ((uint32_t)0x00000100) /*!< Handlers running at priority -1 and -2 */ -#define SCB_CCR_STKALIGN ((uint32_t)0x00000200) /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */ - -/******************* Bit definition for SCB_SHPR register ********************/ -#define SCB_SHPR_PRI_N_Pos (0U) -#define SCB_SHPR_PRI_N_Msk (0xFFU << SCB_SHPR_PRI_N_Pos) /*!< 0x000000FF */ -#define SCB_SHPR_PRI_N SCB_SHPR_PRI_N_Msk /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */ -#define SCB_SHPR_PRI_N1_Pos (8U) -#define SCB_SHPR_PRI_N1_Msk (0xFFU << SCB_SHPR_PRI_N1_Pos) /*!< 0x0000FF00 */ -#define SCB_SHPR_PRI_N1 SCB_SHPR_PRI_N1_Msk /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */ -#define SCB_SHPR_PRI_N2_Pos (16U) -#define SCB_SHPR_PRI_N2_Msk (0xFFU << SCB_SHPR_PRI_N2_Pos) /*!< 0x00FF0000 */ -#define SCB_SHPR_PRI_N2 SCB_SHPR_PRI_N2_Msk /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */ -#define SCB_SHPR_PRI_N3_Pos (24U) -#define SCB_SHPR_PRI_N3_Msk (0xFFU << SCB_SHPR_PRI_N3_Pos) /*!< 0xFF000000 */ -#define SCB_SHPR_PRI_N3 SCB_SHPR_PRI_N3_Msk /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */ - -/****************** Bit definition for SCB_SHCSR register *******************/ -#define SCB_SHCSR_MEMFAULTACT ((uint32_t)0x00000001) /*!< MemManage is active */ -#define SCB_SHCSR_BUSFAULTACT ((uint32_t)0x00000002) /*!< BusFault is active */ -#define SCB_SHCSR_USGFAULTACT ((uint32_t)0x00000008) /*!< UsageFault is active */ -#define SCB_SHCSR_SVCALLACT ((uint32_t)0x00000080) /*!< SVCall is active */ -#define SCB_SHCSR_MONITORACT ((uint32_t)0x00000100) /*!< Monitor is active */ -#define SCB_SHCSR_PENDSVACT ((uint32_t)0x00000400) /*!< PendSV is active */ -#define SCB_SHCSR_SYSTICKACT ((uint32_t)0x00000800) /*!< SysTick is active */ -#define SCB_SHCSR_USGFAULTPENDED ((uint32_t)0x00001000) /*!< Usage Fault is pended */ -#define SCB_SHCSR_MEMFAULTPENDED ((uint32_t)0x00002000) /*!< MemManage is pended */ -#define SCB_SHCSR_BUSFAULTPENDED ((uint32_t)0x00004000) /*!< Bus Fault is pended */ -#define SCB_SHCSR_SVCALLPENDED ((uint32_t)0x00008000) /*!< SVCall is pended */ -#define SCB_SHCSR_MEMFAULTENA ((uint32_t)0x00010000) /*!< MemManage enable */ -#define SCB_SHCSR_BUSFAULTENA ((uint32_t)0x00020000) /*!< Bus Fault enable */ -#define SCB_SHCSR_USGFAULTENA ((uint32_t)0x00040000) /*!< UsageFault enable */ - -/******************* Bit definition for SCB_CFSR register *******************/ -/*!< MFSR */ -#define SCB_CFSR_IACCVIOL_Pos (0U) -#define SCB_CFSR_IACCVIOL_Msk (0x1U << SCB_CFSR_IACCVIOL_Pos) /*!< 0x00000001 */ -#define SCB_CFSR_IACCVIOL SCB_CFSR_IACCVIOL_Msk /*!< Instruction access violation */ -#define SCB_CFSR_DACCVIOL_Pos (1U) -#define SCB_CFSR_DACCVIOL_Msk (0x1U << SCB_CFSR_DACCVIOL_Pos) /*!< 0x00000002 */ -#define SCB_CFSR_DACCVIOL SCB_CFSR_DACCVIOL_Msk /*!< Data access violation */ -#define SCB_CFSR_MUNSTKERR_Pos (3U) -#define SCB_CFSR_MUNSTKERR_Msk (0x1U << SCB_CFSR_MUNSTKERR_Pos) /*!< 0x00000008 */ -#define SCB_CFSR_MUNSTKERR SCB_CFSR_MUNSTKERR_Msk /*!< Unstacking error */ -#define SCB_CFSR_MSTKERR_Pos (4U) -#define SCB_CFSR_MSTKERR_Msk (0x1U << SCB_CFSR_MSTKERR_Pos) /*!< 0x00000010 */ -#define SCB_CFSR_MSTKERR SCB_CFSR_MSTKERR_Msk /*!< Stacking error */ -#define SCB_CFSR_MMARVALID_Pos (7U) -#define SCB_CFSR_MMARVALID_Msk (0x1U << SCB_CFSR_MMARVALID_Pos) /*!< 0x00000080 */ -#define SCB_CFSR_MMARVALID SCB_CFSR_MMARVALID_Msk /*!< Memory Manage Address Register address valid flag */ -/*!< BFSR */ -#define SCB_CFSR_IBUSERR_Pos (8U) -#define SCB_CFSR_IBUSERR_Msk (0x1U << SCB_CFSR_IBUSERR_Pos) /*!< 0x00000100 */ -#define SCB_CFSR_IBUSERR SCB_CFSR_IBUSERR_Msk /*!< Instruction bus error flag */ -#define SCB_CFSR_PRECISERR_Pos (9U) -#define SCB_CFSR_PRECISERR_Msk (0x1U << SCB_CFSR_PRECISERR_Pos) /*!< 0x00000200 */ -#define SCB_CFSR_PRECISERR SCB_CFSR_PRECISERR_Msk /*!< Precise data bus error */ -#define SCB_CFSR_IMPRECISERR_Pos (10U) -#define SCB_CFSR_IMPRECISERR_Msk (0x1U << SCB_CFSR_IMPRECISERR_Pos) /*!< 0x00000400 */ -#define SCB_CFSR_IMPRECISERR SCB_CFSR_IMPRECISERR_Msk /*!< Imprecise data bus error */ -#define SCB_CFSR_UNSTKERR_Pos (11U) -#define SCB_CFSR_UNSTKERR_Msk (0x1U << SCB_CFSR_UNSTKERR_Pos) /*!< 0x00000800 */ -#define SCB_CFSR_UNSTKERR SCB_CFSR_UNSTKERR_Msk /*!< Unstacking error */ -#define SCB_CFSR_STKERR_Pos (12U) -#define SCB_CFSR_STKERR_Msk (0x1U << SCB_CFSR_STKERR_Pos) /*!< 0x00001000 */ -#define SCB_CFSR_STKERR SCB_CFSR_STKERR_Msk /*!< Stacking error */ -#define SCB_CFSR_BFARVALID_Pos (15U) -#define SCB_CFSR_BFARVALID_Msk (0x1U << SCB_CFSR_BFARVALID_Pos) /*!< 0x00008000 */ -#define SCB_CFSR_BFARVALID SCB_CFSR_BFARVALID_Msk /*!< Bus Fault Address Register address valid flag */ -/*!< UFSR */ -#define SCB_CFSR_UNDEFINSTR_Pos (16U) -#define SCB_CFSR_UNDEFINSTR_Msk (0x1U << SCB_CFSR_UNDEFINSTR_Pos) /*!< 0x00010000 */ -#define SCB_CFSR_UNDEFINSTR SCB_CFSR_UNDEFINSTR_Msk /*!< The processor attempt to execute an undefined instruction */ -#define SCB_CFSR_INVSTATE_Pos (17U) -#define SCB_CFSR_INVSTATE_Msk (0x1U << SCB_CFSR_INVSTATE_Pos) /*!< 0x00020000 */ -#define SCB_CFSR_INVSTATE SCB_CFSR_INVSTATE_Msk /*!< Invalid combination of EPSR and instruction */ -#define SCB_CFSR_INVPC_Pos (18U) -#define SCB_CFSR_INVPC_Msk (0x1U << SCB_CFSR_INVPC_Pos) /*!< 0x00040000 */ -#define SCB_CFSR_INVPC SCB_CFSR_INVPC_Msk /*!< Attempt to load EXC_RETURN into pc illegally */ -#define SCB_CFSR_NOCP_Pos (19U) -#define SCB_CFSR_NOCP_Msk (0x1U << SCB_CFSR_NOCP_Pos) /*!< 0x00080000 */ -#define SCB_CFSR_NOCP SCB_CFSR_NOCP_Msk /*!< Attempt to use a coprocessor instruction */ -#define SCB_CFSR_UNALIGNED_Pos (24U) -#define SCB_CFSR_UNALIGNED_Msk (0x1U << SCB_CFSR_UNALIGNED_Pos) /*!< 0x01000000 */ -#define SCB_CFSR_UNALIGNED SCB_CFSR_UNALIGNED_Msk /*!< Fault occurs when there is an attempt to make an unaligned memory access */ -#define SCB_CFSR_DIVBYZERO_Pos (25U) -#define SCB_CFSR_DIVBYZERO_Msk (0x1U << SCB_CFSR_DIVBYZERO_Pos) /*!< 0x02000000 */ -#define SCB_CFSR_DIVBYZERO SCB_CFSR_DIVBYZERO_Msk /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */ - -/******************* Bit definition for SCB_HFSR register *******************/ -#define SCB_HFSR_VECTTBL ((uint32_t)0x00000002) /*!< Fault occurs because of vector table read on exception processing */ -#define SCB_HFSR_FORCED ((uint32_t)0x40000000) /*!< Hard Fault activated when a configurable Fault was received and cannot activate */ -#define SCB_HFSR_DEBUGEVT ((uint32_t)0x80000000) /*!< Fault related to debug */ - -/******************* Bit definition for SCB_DFSR register *******************/ -#define SCB_DFSR_HALTED ((uint32_t)0x00000001) /*!< Halt request flag */ -#define SCB_DFSR_BKPT ((uint32_t)0x00000002) /*!< BKPT flag */ -#define SCB_DFSR_DWTTRAP ((uint32_t)0x00000004) /*!< Data Watchpoint and Trace (DWT) flag */ -#define SCB_DFSR_VCATCH ((uint32_t)0x00000008) /*!< Vector catch flag */ -#define SCB_DFSR_EXTERNAL ((uint32_t)0x00000010) /*!< External debug request flag */ - -/******************* Bit definition for SCB_MMFAR register ******************/ -#define SCB_MMFAR_ADDRESS_Pos (0U) -#define SCB_MMFAR_ADDRESS_Msk (0xFFFFFFFFU << SCB_MMFAR_ADDRESS_Pos) /*!< 0xFFFFFFFF */ -#define SCB_MMFAR_ADDRESS SCB_MMFAR_ADDRESS_Msk /*!< Mem Manage fault address field */ - -/******************* Bit definition for SCB_BFAR register *******************/ -#define SCB_BFAR_ADDRESS_Pos (0U) -#define SCB_BFAR_ADDRESS_Msk (0xFFFFFFFFU << SCB_BFAR_ADDRESS_Pos) /*!< 0xFFFFFFFF */ -#define SCB_BFAR_ADDRESS SCB_BFAR_ADDRESS_Msk /*!< Bus fault address field */ - -/******************* Bit definition for SCB_afsr register *******************/ -#define SCB_AFSR_IMPDEF_Pos (0U) -#define SCB_AFSR_IMPDEF_Msk (0xFFFFFFFFU << SCB_AFSR_IMPDEF_Pos) /*!< 0xFFFFFFFF */ -#define SCB_AFSR_IMPDEF SCB_AFSR_IMPDEF_Msk /*!< Implementation defined */ - -/******************************************************************************/ -/* */ -/* External Interrupt/Event Controller */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for EXTI_IMR register *******************/ -#define EXTI_IMR_MR0_Pos (0U) -#define EXTI_IMR_MR0_Msk (0x1U << EXTI_IMR_MR0_Pos) /*!< 0x00000001 */ -#define EXTI_IMR_MR0 EXTI_IMR_MR0_Msk /*!< Interrupt Mask on line 0 */ -#define EXTI_IMR_MR1_Pos (1U) -#define EXTI_IMR_MR1_Msk (0x1U << EXTI_IMR_MR1_Pos) /*!< 0x00000002 */ -#define EXTI_IMR_MR1 EXTI_IMR_MR1_Msk /*!< Interrupt Mask on line 1 */ -#define EXTI_IMR_MR2_Pos (2U) -#define EXTI_IMR_MR2_Msk (0x1U << EXTI_IMR_MR2_Pos) /*!< 0x00000004 */ -#define EXTI_IMR_MR2 EXTI_IMR_MR2_Msk /*!< Interrupt Mask on line 2 */ -#define EXTI_IMR_MR3_Pos (3U) -#define EXTI_IMR_MR3_Msk (0x1U << EXTI_IMR_MR3_Pos) /*!< 0x00000008 */ -#define EXTI_IMR_MR3 EXTI_IMR_MR3_Msk /*!< Interrupt Mask on line 3 */ -#define EXTI_IMR_MR4_Pos (4U) -#define EXTI_IMR_MR4_Msk (0x1U << EXTI_IMR_MR4_Pos) /*!< 0x00000010 */ -#define EXTI_IMR_MR4 EXTI_IMR_MR4_Msk /*!< Interrupt Mask on line 4 */ -#define EXTI_IMR_MR5_Pos (5U) -#define EXTI_IMR_MR5_Msk (0x1U << EXTI_IMR_MR5_Pos) /*!< 0x00000020 */ -#define EXTI_IMR_MR5 EXTI_IMR_MR5_Msk /*!< Interrupt Mask on line 5 */ -#define EXTI_IMR_MR6_Pos (6U) -#define EXTI_IMR_MR6_Msk (0x1U << EXTI_IMR_MR6_Pos) /*!< 0x00000040 */ -#define EXTI_IMR_MR6 EXTI_IMR_MR6_Msk /*!< Interrupt Mask on line 6 */ -#define EXTI_IMR_MR7_Pos (7U) -#define EXTI_IMR_MR7_Msk (0x1U << EXTI_IMR_MR7_Pos) /*!< 0x00000080 */ -#define EXTI_IMR_MR7 EXTI_IMR_MR7_Msk /*!< Interrupt Mask on line 7 */ -#define EXTI_IMR_MR8_Pos (8U) -#define EXTI_IMR_MR8_Msk (0x1U << EXTI_IMR_MR8_Pos) /*!< 0x00000100 */ -#define EXTI_IMR_MR8 EXTI_IMR_MR8_Msk /*!< Interrupt Mask on line 8 */ -#define EXTI_IMR_MR9_Pos (9U) -#define EXTI_IMR_MR9_Msk (0x1U << EXTI_IMR_MR9_Pos) /*!< 0x00000200 */ -#define EXTI_IMR_MR9 EXTI_IMR_MR9_Msk /*!< Interrupt Mask on line 9 */ -#define EXTI_IMR_MR10_Pos (10U) -#define EXTI_IMR_MR10_Msk (0x1U << EXTI_IMR_MR10_Pos) /*!< 0x00000400 */ -#define EXTI_IMR_MR10 EXTI_IMR_MR10_Msk /*!< Interrupt Mask on line 10 */ -#define EXTI_IMR_MR11_Pos (11U) -#define EXTI_IMR_MR11_Msk (0x1U << EXTI_IMR_MR11_Pos) /*!< 0x00000800 */ -#define EXTI_IMR_MR11 EXTI_IMR_MR11_Msk /*!< Interrupt Mask on line 11 */ -#define EXTI_IMR_MR12_Pos (12U) -#define EXTI_IMR_MR12_Msk (0x1U << EXTI_IMR_MR12_Pos) /*!< 0x00001000 */ -#define EXTI_IMR_MR12 EXTI_IMR_MR12_Msk /*!< Interrupt Mask on line 12 */ -#define EXTI_IMR_MR13_Pos (13U) -#define EXTI_IMR_MR13_Msk (0x1U << EXTI_IMR_MR13_Pos) /*!< 0x00002000 */ -#define EXTI_IMR_MR13 EXTI_IMR_MR13_Msk /*!< Interrupt Mask on line 13 */ -#define EXTI_IMR_MR14_Pos (14U) -#define EXTI_IMR_MR14_Msk (0x1U << EXTI_IMR_MR14_Pos) /*!< 0x00004000 */ -#define EXTI_IMR_MR14 EXTI_IMR_MR14_Msk /*!< Interrupt Mask on line 14 */ -#define EXTI_IMR_MR15_Pos (15U) -#define EXTI_IMR_MR15_Msk (0x1U << EXTI_IMR_MR15_Pos) /*!< 0x00008000 */ -#define EXTI_IMR_MR15 EXTI_IMR_MR15_Msk /*!< Interrupt Mask on line 15 */ -#define EXTI_IMR_MR16_Pos (16U) -#define EXTI_IMR_MR16_Msk (0x1U << EXTI_IMR_MR16_Pos) /*!< 0x00010000 */ -#define EXTI_IMR_MR16 EXTI_IMR_MR16_Msk /*!< Interrupt Mask on line 16 */ -#define EXTI_IMR_MR17_Pos (17U) -#define EXTI_IMR_MR17_Msk (0x1U << EXTI_IMR_MR17_Pos) /*!< 0x00020000 */ -#define EXTI_IMR_MR17 EXTI_IMR_MR17_Msk /*!< Interrupt Mask on line 17 */ -#define EXTI_IMR_MR18_Pos (18U) -#define EXTI_IMR_MR18_Msk (0x1U << EXTI_IMR_MR18_Pos) /*!< 0x00040000 */ -#define EXTI_IMR_MR18 EXTI_IMR_MR18_Msk /*!< Interrupt Mask on line 18 */ -#define EXTI_IMR_MR19_Pos (19U) -#define EXTI_IMR_MR19_Msk (0x1U << EXTI_IMR_MR19_Pos) /*!< 0x00080000 */ -#define EXTI_IMR_MR19 EXTI_IMR_MR19_Msk /*!< Interrupt Mask on line 19 */ - -/* References Defines */ -#define EXTI_IMR_IM0 EXTI_IMR_MR0 -#define EXTI_IMR_IM1 EXTI_IMR_MR1 -#define EXTI_IMR_IM2 EXTI_IMR_MR2 -#define EXTI_IMR_IM3 EXTI_IMR_MR3 -#define EXTI_IMR_IM4 EXTI_IMR_MR4 -#define EXTI_IMR_IM5 EXTI_IMR_MR5 -#define EXTI_IMR_IM6 EXTI_IMR_MR6 -#define EXTI_IMR_IM7 EXTI_IMR_MR7 -#define EXTI_IMR_IM8 EXTI_IMR_MR8 -#define EXTI_IMR_IM9 EXTI_IMR_MR9 -#define EXTI_IMR_IM10 EXTI_IMR_MR10 -#define EXTI_IMR_IM11 EXTI_IMR_MR11 -#define EXTI_IMR_IM12 EXTI_IMR_MR12 -#define EXTI_IMR_IM13 EXTI_IMR_MR13 -#define EXTI_IMR_IM14 EXTI_IMR_MR14 -#define EXTI_IMR_IM15 EXTI_IMR_MR15 -#define EXTI_IMR_IM16 EXTI_IMR_MR16 -#define EXTI_IMR_IM17 EXTI_IMR_MR17 -#define EXTI_IMR_IM18 EXTI_IMR_MR18 -#define EXTI_IMR_IM19 EXTI_IMR_MR19 - -/******************* Bit definition for EXTI_EMR register *******************/ -#define EXTI_EMR_MR0_Pos (0U) -#define EXTI_EMR_MR0_Msk (0x1U << EXTI_EMR_MR0_Pos) /*!< 0x00000001 */ -#define EXTI_EMR_MR0 EXTI_EMR_MR0_Msk /*!< Event Mask on line 0 */ -#define EXTI_EMR_MR1_Pos (1U) -#define EXTI_EMR_MR1_Msk (0x1U << EXTI_EMR_MR1_Pos) /*!< 0x00000002 */ -#define EXTI_EMR_MR1 EXTI_EMR_MR1_Msk /*!< Event Mask on line 1 */ -#define EXTI_EMR_MR2_Pos (2U) -#define EXTI_EMR_MR2_Msk (0x1U << EXTI_EMR_MR2_Pos) /*!< 0x00000004 */ -#define EXTI_EMR_MR2 EXTI_EMR_MR2_Msk /*!< Event Mask on line 2 */ -#define EXTI_EMR_MR3_Pos (3U) -#define EXTI_EMR_MR3_Msk (0x1U << EXTI_EMR_MR3_Pos) /*!< 0x00000008 */ -#define EXTI_EMR_MR3 EXTI_EMR_MR3_Msk /*!< Event Mask on line 3 */ -#define EXTI_EMR_MR4_Pos (4U) -#define EXTI_EMR_MR4_Msk (0x1U << EXTI_EMR_MR4_Pos) /*!< 0x00000010 */ -#define EXTI_EMR_MR4 EXTI_EMR_MR4_Msk /*!< Event Mask on line 4 */ -#define EXTI_EMR_MR5_Pos (5U) -#define EXTI_EMR_MR5_Msk (0x1U << EXTI_EMR_MR5_Pos) /*!< 0x00000020 */ -#define EXTI_EMR_MR5 EXTI_EMR_MR5_Msk /*!< Event Mask on line 5 */ -#define EXTI_EMR_MR6_Pos (6U) -#define EXTI_EMR_MR6_Msk (0x1U << EXTI_EMR_MR6_Pos) /*!< 0x00000040 */ -#define EXTI_EMR_MR6 EXTI_EMR_MR6_Msk /*!< Event Mask on line 6 */ -#define EXTI_EMR_MR7_Pos (7U) -#define EXTI_EMR_MR7_Msk (0x1U << EXTI_EMR_MR7_Pos) /*!< 0x00000080 */ -#define EXTI_EMR_MR7 EXTI_EMR_MR7_Msk /*!< Event Mask on line 7 */ -#define EXTI_EMR_MR8_Pos (8U) -#define EXTI_EMR_MR8_Msk (0x1U << EXTI_EMR_MR8_Pos) /*!< 0x00000100 */ -#define EXTI_EMR_MR8 EXTI_EMR_MR8_Msk /*!< Event Mask on line 8 */ -#define EXTI_EMR_MR9_Pos (9U) -#define EXTI_EMR_MR9_Msk (0x1U << EXTI_EMR_MR9_Pos) /*!< 0x00000200 */ -#define EXTI_EMR_MR9 EXTI_EMR_MR9_Msk /*!< Event Mask on line 9 */ -#define EXTI_EMR_MR10_Pos (10U) -#define EXTI_EMR_MR10_Msk (0x1U << EXTI_EMR_MR10_Pos) /*!< 0x00000400 */ -#define EXTI_EMR_MR10 EXTI_EMR_MR10_Msk /*!< Event Mask on line 10 */ -#define EXTI_EMR_MR11_Pos (11U) -#define EXTI_EMR_MR11_Msk (0x1U << EXTI_EMR_MR11_Pos) /*!< 0x00000800 */ -#define EXTI_EMR_MR11 EXTI_EMR_MR11_Msk /*!< Event Mask on line 11 */ -#define EXTI_EMR_MR12_Pos (12U) -#define EXTI_EMR_MR12_Msk (0x1U << EXTI_EMR_MR12_Pos) /*!< 0x00001000 */ -#define EXTI_EMR_MR12 EXTI_EMR_MR12_Msk /*!< Event Mask on line 12 */ -#define EXTI_EMR_MR13_Pos (13U) -#define EXTI_EMR_MR13_Msk (0x1U << EXTI_EMR_MR13_Pos) /*!< 0x00002000 */ -#define EXTI_EMR_MR13 EXTI_EMR_MR13_Msk /*!< Event Mask on line 13 */ -#define EXTI_EMR_MR14_Pos (14U) -#define EXTI_EMR_MR14_Msk (0x1U << EXTI_EMR_MR14_Pos) /*!< 0x00004000 */ -#define EXTI_EMR_MR14 EXTI_EMR_MR14_Msk /*!< Event Mask on line 14 */ -#define EXTI_EMR_MR15_Pos (15U) -#define EXTI_EMR_MR15_Msk (0x1U << EXTI_EMR_MR15_Pos) /*!< 0x00008000 */ -#define EXTI_EMR_MR15 EXTI_EMR_MR15_Msk /*!< Event Mask on line 15 */ -#define EXTI_EMR_MR16_Pos (16U) -#define EXTI_EMR_MR16_Msk (0x1U << EXTI_EMR_MR16_Pos) /*!< 0x00010000 */ -#define EXTI_EMR_MR16 EXTI_EMR_MR16_Msk /*!< Event Mask on line 16 */ -#define EXTI_EMR_MR17_Pos (17U) -#define EXTI_EMR_MR17_Msk (0x1U << EXTI_EMR_MR17_Pos) /*!< 0x00020000 */ -#define EXTI_EMR_MR17 EXTI_EMR_MR17_Msk /*!< Event Mask on line 17 */ -#define EXTI_EMR_MR18_Pos (18U) -#define EXTI_EMR_MR18_Msk (0x1U << EXTI_EMR_MR18_Pos) /*!< 0x00040000 */ -#define EXTI_EMR_MR18 EXTI_EMR_MR18_Msk /*!< Event Mask on line 18 */ -#define EXTI_EMR_MR19_Pos (19U) -#define EXTI_EMR_MR19_Msk (0x1U << EXTI_EMR_MR19_Pos) /*!< 0x00080000 */ -#define EXTI_EMR_MR19 EXTI_EMR_MR19_Msk /*!< Event Mask on line 19 */ - -/* References Defines */ -#define EXTI_EMR_EM0 EXTI_EMR_MR0 -#define EXTI_EMR_EM1 EXTI_EMR_MR1 -#define EXTI_EMR_EM2 EXTI_EMR_MR2 -#define EXTI_EMR_EM3 EXTI_EMR_MR3 -#define EXTI_EMR_EM4 EXTI_EMR_MR4 -#define EXTI_EMR_EM5 EXTI_EMR_MR5 -#define EXTI_EMR_EM6 EXTI_EMR_MR6 -#define EXTI_EMR_EM7 EXTI_EMR_MR7 -#define EXTI_EMR_EM8 EXTI_EMR_MR8 -#define EXTI_EMR_EM9 EXTI_EMR_MR9 -#define EXTI_EMR_EM10 EXTI_EMR_MR10 -#define EXTI_EMR_EM11 EXTI_EMR_MR11 -#define EXTI_EMR_EM12 EXTI_EMR_MR12 -#define EXTI_EMR_EM13 EXTI_EMR_MR13 -#define EXTI_EMR_EM14 EXTI_EMR_MR14 -#define EXTI_EMR_EM15 EXTI_EMR_MR15 -#define EXTI_EMR_EM16 EXTI_EMR_MR16 -#define EXTI_EMR_EM17 EXTI_EMR_MR17 -#define EXTI_EMR_EM18 EXTI_EMR_MR18 -#define EXTI_EMR_EM19 EXTI_EMR_MR19 - -/****************** Bit definition for EXTI_RTSR register *******************/ -#define EXTI_RTSR_TR0_Pos (0U) -#define EXTI_RTSR_TR0_Msk (0x1U << EXTI_RTSR_TR0_Pos) /*!< 0x00000001 */ -#define EXTI_RTSR_TR0 EXTI_RTSR_TR0_Msk /*!< Rising trigger event configuration bit of line 0 */ -#define EXTI_RTSR_TR1_Pos (1U) -#define EXTI_RTSR_TR1_Msk (0x1U << EXTI_RTSR_TR1_Pos) /*!< 0x00000002 */ -#define EXTI_RTSR_TR1 EXTI_RTSR_TR1_Msk /*!< Rising trigger event configuration bit of line 1 */ -#define EXTI_RTSR_TR2_Pos (2U) -#define EXTI_RTSR_TR2_Msk (0x1U << EXTI_RTSR_TR2_Pos) /*!< 0x00000004 */ -#define EXTI_RTSR_TR2 EXTI_RTSR_TR2_Msk /*!< Rising trigger event configuration bit of line 2 */ -#define EXTI_RTSR_TR3_Pos (3U) -#define EXTI_RTSR_TR3_Msk (0x1U << EXTI_RTSR_TR3_Pos) /*!< 0x00000008 */ -#define EXTI_RTSR_TR3 EXTI_RTSR_TR3_Msk /*!< Rising trigger event configuration bit of line 3 */ -#define EXTI_RTSR_TR4_Pos (4U) -#define EXTI_RTSR_TR4_Msk (0x1U << EXTI_RTSR_TR4_Pos) /*!< 0x00000010 */ -#define EXTI_RTSR_TR4 EXTI_RTSR_TR4_Msk /*!< Rising trigger event configuration bit of line 4 */ -#define EXTI_RTSR_TR5_Pos (5U) -#define EXTI_RTSR_TR5_Msk (0x1U << EXTI_RTSR_TR5_Pos) /*!< 0x00000020 */ -#define EXTI_RTSR_TR5 EXTI_RTSR_TR5_Msk /*!< Rising trigger event configuration bit of line 5 */ -#define EXTI_RTSR_TR6_Pos (6U) -#define EXTI_RTSR_TR6_Msk (0x1U << EXTI_RTSR_TR6_Pos) /*!< 0x00000040 */ -#define EXTI_RTSR_TR6 EXTI_RTSR_TR6_Msk /*!< Rising trigger event configuration bit of line 6 */ -#define EXTI_RTSR_TR7_Pos (7U) -#define EXTI_RTSR_TR7_Msk (0x1U << EXTI_RTSR_TR7_Pos) /*!< 0x00000080 */ -#define EXTI_RTSR_TR7 EXTI_RTSR_TR7_Msk /*!< Rising trigger event configuration bit of line 7 */ -#define EXTI_RTSR_TR8_Pos (8U) -#define EXTI_RTSR_TR8_Msk (0x1U << EXTI_RTSR_TR8_Pos) /*!< 0x00000100 */ -#define EXTI_RTSR_TR8 EXTI_RTSR_TR8_Msk /*!< Rising trigger event configuration bit of line 8 */ -#define EXTI_RTSR_TR9_Pos (9U) -#define EXTI_RTSR_TR9_Msk (0x1U << EXTI_RTSR_TR9_Pos) /*!< 0x00000200 */ -#define EXTI_RTSR_TR9 EXTI_RTSR_TR9_Msk /*!< Rising trigger event configuration bit of line 9 */ -#define EXTI_RTSR_TR10_Pos (10U) -#define EXTI_RTSR_TR10_Msk (0x1U << EXTI_RTSR_TR10_Pos) /*!< 0x00000400 */ -#define EXTI_RTSR_TR10 EXTI_RTSR_TR10_Msk /*!< Rising trigger event configuration bit of line 10 */ -#define EXTI_RTSR_TR11_Pos (11U) -#define EXTI_RTSR_TR11_Msk (0x1U << EXTI_RTSR_TR11_Pos) /*!< 0x00000800 */ -#define EXTI_RTSR_TR11 EXTI_RTSR_TR11_Msk /*!< Rising trigger event configuration bit of line 11 */ -#define EXTI_RTSR_TR12_Pos (12U) -#define EXTI_RTSR_TR12_Msk (0x1U << EXTI_RTSR_TR12_Pos) /*!< 0x00001000 */ -#define EXTI_RTSR_TR12 EXTI_RTSR_TR12_Msk /*!< Rising trigger event configuration bit of line 12 */ -#define EXTI_RTSR_TR13_Pos (13U) -#define EXTI_RTSR_TR13_Msk (0x1U << EXTI_RTSR_TR13_Pos) /*!< 0x00002000 */ -#define EXTI_RTSR_TR13 EXTI_RTSR_TR13_Msk /*!< Rising trigger event configuration bit of line 13 */ -#define EXTI_RTSR_TR14_Pos (14U) -#define EXTI_RTSR_TR14_Msk (0x1U << EXTI_RTSR_TR14_Pos) /*!< 0x00004000 */ -#define EXTI_RTSR_TR14 EXTI_RTSR_TR14_Msk /*!< Rising trigger event configuration bit of line 14 */ -#define EXTI_RTSR_TR15_Pos (15U) -#define EXTI_RTSR_TR15_Msk (0x1U << EXTI_RTSR_TR15_Pos) /*!< 0x00008000 */ -#define EXTI_RTSR_TR15 EXTI_RTSR_TR15_Msk /*!< Rising trigger event configuration bit of line 15 */ -#define EXTI_RTSR_TR16_Pos (16U) -#define EXTI_RTSR_TR16_Msk (0x1U << EXTI_RTSR_TR16_Pos) /*!< 0x00010000 */ -#define EXTI_RTSR_TR16 EXTI_RTSR_TR16_Msk /*!< Rising trigger event configuration bit of line 16 */ -#define EXTI_RTSR_TR17_Pos (17U) -#define EXTI_RTSR_TR17_Msk (0x1U << EXTI_RTSR_TR17_Pos) /*!< 0x00020000 */ -#define EXTI_RTSR_TR17 EXTI_RTSR_TR17_Msk /*!< Rising trigger event configuration bit of line 17 */ -#define EXTI_RTSR_TR18_Pos (18U) -#define EXTI_RTSR_TR18_Msk (0x1U << EXTI_RTSR_TR18_Pos) /*!< 0x00040000 */ -#define EXTI_RTSR_TR18 EXTI_RTSR_TR18_Msk /*!< Rising trigger event configuration bit of line 18 */ -#define EXTI_RTSR_TR19_Pos (19U) -#define EXTI_RTSR_TR19_Msk (0x1U << EXTI_RTSR_TR19_Pos) /*!< 0x00080000 */ -#define EXTI_RTSR_TR19 EXTI_RTSR_TR19_Msk /*!< Rising trigger event configuration bit of line 19 */ - -/* References Defines */ -#define EXTI_RTSR_RT0 EXTI_RTSR_TR0 -#define EXTI_RTSR_RT1 EXTI_RTSR_TR1 -#define EXTI_RTSR_RT2 EXTI_RTSR_TR2 -#define EXTI_RTSR_RT3 EXTI_RTSR_TR3 -#define EXTI_RTSR_RT4 EXTI_RTSR_TR4 -#define EXTI_RTSR_RT5 EXTI_RTSR_TR5 -#define EXTI_RTSR_RT6 EXTI_RTSR_TR6 -#define EXTI_RTSR_RT7 EXTI_RTSR_TR7 -#define EXTI_RTSR_RT8 EXTI_RTSR_TR8 -#define EXTI_RTSR_RT9 EXTI_RTSR_TR9 -#define EXTI_RTSR_RT10 EXTI_RTSR_TR10 -#define EXTI_RTSR_RT11 EXTI_RTSR_TR11 -#define EXTI_RTSR_RT12 EXTI_RTSR_TR12 -#define EXTI_RTSR_RT13 EXTI_RTSR_TR13 -#define EXTI_RTSR_RT14 EXTI_RTSR_TR14 -#define EXTI_RTSR_RT15 EXTI_RTSR_TR15 -#define EXTI_RTSR_RT16 EXTI_RTSR_TR16 -#define EXTI_RTSR_RT17 EXTI_RTSR_TR17 -#define EXTI_RTSR_RT18 EXTI_RTSR_TR18 -#define EXTI_RTSR_RT19 EXTI_RTSR_TR19 - -/****************** Bit definition for EXTI_FTSR register *******************/ -#define EXTI_FTSR_TR0_Pos (0U) -#define EXTI_FTSR_TR0_Msk (0x1U << EXTI_FTSR_TR0_Pos) /*!< 0x00000001 */ -#define EXTI_FTSR_TR0 EXTI_FTSR_TR0_Msk /*!< Falling trigger event configuration bit of line 0 */ -#define EXTI_FTSR_TR1_Pos (1U) -#define EXTI_FTSR_TR1_Msk (0x1U << EXTI_FTSR_TR1_Pos) /*!< 0x00000002 */ -#define EXTI_FTSR_TR1 EXTI_FTSR_TR1_Msk /*!< Falling trigger event configuration bit of line 1 */ -#define EXTI_FTSR_TR2_Pos (2U) -#define EXTI_FTSR_TR2_Msk (0x1U << EXTI_FTSR_TR2_Pos) /*!< 0x00000004 */ -#define EXTI_FTSR_TR2 EXTI_FTSR_TR2_Msk /*!< Falling trigger event configuration bit of line 2 */ -#define EXTI_FTSR_TR3_Pos (3U) -#define EXTI_FTSR_TR3_Msk (0x1U << EXTI_FTSR_TR3_Pos) /*!< 0x00000008 */ -#define EXTI_FTSR_TR3 EXTI_FTSR_TR3_Msk /*!< Falling trigger event configuration bit of line 3 */ -#define EXTI_FTSR_TR4_Pos (4U) -#define EXTI_FTSR_TR4_Msk (0x1U << EXTI_FTSR_TR4_Pos) /*!< 0x00000010 */ -#define EXTI_FTSR_TR4 EXTI_FTSR_TR4_Msk /*!< Falling trigger event configuration bit of line 4 */ -#define EXTI_FTSR_TR5_Pos (5U) -#define EXTI_FTSR_TR5_Msk (0x1U << EXTI_FTSR_TR5_Pos) /*!< 0x00000020 */ -#define EXTI_FTSR_TR5 EXTI_FTSR_TR5_Msk /*!< Falling trigger event configuration bit of line 5 */ -#define EXTI_FTSR_TR6_Pos (6U) -#define EXTI_FTSR_TR6_Msk (0x1U << EXTI_FTSR_TR6_Pos) /*!< 0x00000040 */ -#define EXTI_FTSR_TR6 EXTI_FTSR_TR6_Msk /*!< Falling trigger event configuration bit of line 6 */ -#define EXTI_FTSR_TR7_Pos (7U) -#define EXTI_FTSR_TR7_Msk (0x1U << EXTI_FTSR_TR7_Pos) /*!< 0x00000080 */ -#define EXTI_FTSR_TR7 EXTI_FTSR_TR7_Msk /*!< Falling trigger event configuration bit of line 7 */ -#define EXTI_FTSR_TR8_Pos (8U) -#define EXTI_FTSR_TR8_Msk (0x1U << EXTI_FTSR_TR8_Pos) /*!< 0x00000100 */ -#define EXTI_FTSR_TR8 EXTI_FTSR_TR8_Msk /*!< Falling trigger event configuration bit of line 8 */ -#define EXTI_FTSR_TR9_Pos (9U) -#define EXTI_FTSR_TR9_Msk (0x1U << EXTI_FTSR_TR9_Pos) /*!< 0x00000200 */ -#define EXTI_FTSR_TR9 EXTI_FTSR_TR9_Msk /*!< Falling trigger event configuration bit of line 9 */ -#define EXTI_FTSR_TR10_Pos (10U) -#define EXTI_FTSR_TR10_Msk (0x1U << EXTI_FTSR_TR10_Pos) /*!< 0x00000400 */ -#define EXTI_FTSR_TR10 EXTI_FTSR_TR10_Msk /*!< Falling trigger event configuration bit of line 10 */ -#define EXTI_FTSR_TR11_Pos (11U) -#define EXTI_FTSR_TR11_Msk (0x1U << EXTI_FTSR_TR11_Pos) /*!< 0x00000800 */ -#define EXTI_FTSR_TR11 EXTI_FTSR_TR11_Msk /*!< Falling trigger event configuration bit of line 11 */ -#define EXTI_FTSR_TR12_Pos (12U) -#define EXTI_FTSR_TR12_Msk (0x1U << EXTI_FTSR_TR12_Pos) /*!< 0x00001000 */ -#define EXTI_FTSR_TR12 EXTI_FTSR_TR12_Msk /*!< Falling trigger event configuration bit of line 12 */ -#define EXTI_FTSR_TR13_Pos (13U) -#define EXTI_FTSR_TR13_Msk (0x1U << EXTI_FTSR_TR13_Pos) /*!< 0x00002000 */ -#define EXTI_FTSR_TR13 EXTI_FTSR_TR13_Msk /*!< Falling trigger event configuration bit of line 13 */ -#define EXTI_FTSR_TR14_Pos (14U) -#define EXTI_FTSR_TR14_Msk (0x1U << EXTI_FTSR_TR14_Pos) /*!< 0x00004000 */ -#define EXTI_FTSR_TR14 EXTI_FTSR_TR14_Msk /*!< Falling trigger event configuration bit of line 14 */ -#define EXTI_FTSR_TR15_Pos (15U) -#define EXTI_FTSR_TR15_Msk (0x1U << EXTI_FTSR_TR15_Pos) /*!< 0x00008000 */ -#define EXTI_FTSR_TR15 EXTI_FTSR_TR15_Msk /*!< Falling trigger event configuration bit of line 15 */ -#define EXTI_FTSR_TR16_Pos (16U) -#define EXTI_FTSR_TR16_Msk (0x1U << EXTI_FTSR_TR16_Pos) /*!< 0x00010000 */ -#define EXTI_FTSR_TR16 EXTI_FTSR_TR16_Msk /*!< Falling trigger event configuration bit of line 16 */ -#define EXTI_FTSR_TR17_Pos (17U) -#define EXTI_FTSR_TR17_Msk (0x1U << EXTI_FTSR_TR17_Pos) /*!< 0x00020000 */ -#define EXTI_FTSR_TR17 EXTI_FTSR_TR17_Msk /*!< Falling trigger event configuration bit of line 17 */ -#define EXTI_FTSR_TR18_Pos (18U) -#define EXTI_FTSR_TR18_Msk (0x1U << EXTI_FTSR_TR18_Pos) /*!< 0x00040000 */ -#define EXTI_FTSR_TR18 EXTI_FTSR_TR18_Msk /*!< Falling trigger event configuration bit of line 18 */ -#define EXTI_FTSR_TR19_Pos (19U) -#define EXTI_FTSR_TR19_Msk (0x1U << EXTI_FTSR_TR19_Pos) /*!< 0x00080000 */ -#define EXTI_FTSR_TR19 EXTI_FTSR_TR19_Msk /*!< Falling trigger event configuration bit of line 19 */ - -/* References Defines */ -#define EXTI_FTSR_FT0 EXTI_FTSR_TR0 -#define EXTI_FTSR_FT1 EXTI_FTSR_TR1 -#define EXTI_FTSR_FT2 EXTI_FTSR_TR2 -#define EXTI_FTSR_FT3 EXTI_FTSR_TR3 -#define EXTI_FTSR_FT4 EXTI_FTSR_TR4 -#define EXTI_FTSR_FT5 EXTI_FTSR_TR5 -#define EXTI_FTSR_FT6 EXTI_FTSR_TR6 -#define EXTI_FTSR_FT7 EXTI_FTSR_TR7 -#define EXTI_FTSR_FT8 EXTI_FTSR_TR8 -#define EXTI_FTSR_FT9 EXTI_FTSR_TR9 -#define EXTI_FTSR_FT10 EXTI_FTSR_TR10 -#define EXTI_FTSR_FT11 EXTI_FTSR_TR11 -#define EXTI_FTSR_FT12 EXTI_FTSR_TR12 -#define EXTI_FTSR_FT13 EXTI_FTSR_TR13 -#define EXTI_FTSR_FT14 EXTI_FTSR_TR14 -#define EXTI_FTSR_FT15 EXTI_FTSR_TR15 -#define EXTI_FTSR_FT16 EXTI_FTSR_TR16 -#define EXTI_FTSR_FT17 EXTI_FTSR_TR17 -#define EXTI_FTSR_FT18 EXTI_FTSR_TR18 -#define EXTI_FTSR_FT19 EXTI_FTSR_TR19 - -/****************** Bit definition for EXTI_SWIER register ******************/ -#define EXTI_SWIER_SWIER0_Pos (0U) -#define EXTI_SWIER_SWIER0_Msk (0x1U << EXTI_SWIER_SWIER0_Pos) /*!< 0x00000001 */ -#define EXTI_SWIER_SWIER0 EXTI_SWIER_SWIER0_Msk /*!< Software Interrupt on line 0 */ -#define EXTI_SWIER_SWIER1_Pos (1U) -#define EXTI_SWIER_SWIER1_Msk (0x1U << EXTI_SWIER_SWIER1_Pos) /*!< 0x00000002 */ -#define EXTI_SWIER_SWIER1 EXTI_SWIER_SWIER1_Msk /*!< Software Interrupt on line 1 */ -#define EXTI_SWIER_SWIER2_Pos (2U) -#define EXTI_SWIER_SWIER2_Msk (0x1U << EXTI_SWIER_SWIER2_Pos) /*!< 0x00000004 */ -#define EXTI_SWIER_SWIER2 EXTI_SWIER_SWIER2_Msk /*!< Software Interrupt on line 2 */ -#define EXTI_SWIER_SWIER3_Pos (3U) -#define EXTI_SWIER_SWIER3_Msk (0x1U << EXTI_SWIER_SWIER3_Pos) /*!< 0x00000008 */ -#define EXTI_SWIER_SWIER3 EXTI_SWIER_SWIER3_Msk /*!< Software Interrupt on line 3 */ -#define EXTI_SWIER_SWIER4_Pos (4U) -#define EXTI_SWIER_SWIER4_Msk (0x1U << EXTI_SWIER_SWIER4_Pos) /*!< 0x00000010 */ -#define EXTI_SWIER_SWIER4 EXTI_SWIER_SWIER4_Msk /*!< Software Interrupt on line 4 */ -#define EXTI_SWIER_SWIER5_Pos (5U) -#define EXTI_SWIER_SWIER5_Msk (0x1U << EXTI_SWIER_SWIER5_Pos) /*!< 0x00000020 */ -#define EXTI_SWIER_SWIER5 EXTI_SWIER_SWIER5_Msk /*!< Software Interrupt on line 5 */ -#define EXTI_SWIER_SWIER6_Pos (6U) -#define EXTI_SWIER_SWIER6_Msk (0x1U << EXTI_SWIER_SWIER6_Pos) /*!< 0x00000040 */ -#define EXTI_SWIER_SWIER6 EXTI_SWIER_SWIER6_Msk /*!< Software Interrupt on line 6 */ -#define EXTI_SWIER_SWIER7_Pos (7U) -#define EXTI_SWIER_SWIER7_Msk (0x1U << EXTI_SWIER_SWIER7_Pos) /*!< 0x00000080 */ -#define EXTI_SWIER_SWIER7 EXTI_SWIER_SWIER7_Msk /*!< Software Interrupt on line 7 */ -#define EXTI_SWIER_SWIER8_Pos (8U) -#define EXTI_SWIER_SWIER8_Msk (0x1U << EXTI_SWIER_SWIER8_Pos) /*!< 0x00000100 */ -#define EXTI_SWIER_SWIER8 EXTI_SWIER_SWIER8_Msk /*!< Software Interrupt on line 8 */ -#define EXTI_SWIER_SWIER9_Pos (9U) -#define EXTI_SWIER_SWIER9_Msk (0x1U << EXTI_SWIER_SWIER9_Pos) /*!< 0x00000200 */ -#define EXTI_SWIER_SWIER9 EXTI_SWIER_SWIER9_Msk /*!< Software Interrupt on line 9 */ -#define EXTI_SWIER_SWIER10_Pos (10U) -#define EXTI_SWIER_SWIER10_Msk (0x1U << EXTI_SWIER_SWIER10_Pos) /*!< 0x00000400 */ -#define EXTI_SWIER_SWIER10 EXTI_SWIER_SWIER10_Msk /*!< Software Interrupt on line 10 */ -#define EXTI_SWIER_SWIER11_Pos (11U) -#define EXTI_SWIER_SWIER11_Msk (0x1U << EXTI_SWIER_SWIER11_Pos) /*!< 0x00000800 */ -#define EXTI_SWIER_SWIER11 EXTI_SWIER_SWIER11_Msk /*!< Software Interrupt on line 11 */ -#define EXTI_SWIER_SWIER12_Pos (12U) -#define EXTI_SWIER_SWIER12_Msk (0x1U << EXTI_SWIER_SWIER12_Pos) /*!< 0x00001000 */ -#define EXTI_SWIER_SWIER12 EXTI_SWIER_SWIER12_Msk /*!< Software Interrupt on line 12 */ -#define EXTI_SWIER_SWIER13_Pos (13U) -#define EXTI_SWIER_SWIER13_Msk (0x1U << EXTI_SWIER_SWIER13_Pos) /*!< 0x00002000 */ -#define EXTI_SWIER_SWIER13 EXTI_SWIER_SWIER13_Msk /*!< Software Interrupt on line 13 */ -#define EXTI_SWIER_SWIER14_Pos (14U) -#define EXTI_SWIER_SWIER14_Msk (0x1U << EXTI_SWIER_SWIER14_Pos) /*!< 0x00004000 */ -#define EXTI_SWIER_SWIER14 EXTI_SWIER_SWIER14_Msk /*!< Software Interrupt on line 14 */ -#define EXTI_SWIER_SWIER15_Pos (15U) -#define EXTI_SWIER_SWIER15_Msk (0x1U << EXTI_SWIER_SWIER15_Pos) /*!< 0x00008000 */ -#define EXTI_SWIER_SWIER15 EXTI_SWIER_SWIER15_Msk /*!< Software Interrupt on line 15 */ -#define EXTI_SWIER_SWIER16_Pos (16U) -#define EXTI_SWIER_SWIER16_Msk (0x1U << EXTI_SWIER_SWIER16_Pos) /*!< 0x00010000 */ -#define EXTI_SWIER_SWIER16 EXTI_SWIER_SWIER16_Msk /*!< Software Interrupt on line 16 */ -#define EXTI_SWIER_SWIER17_Pos (17U) -#define EXTI_SWIER_SWIER17_Msk (0x1U << EXTI_SWIER_SWIER17_Pos) /*!< 0x00020000 */ -#define EXTI_SWIER_SWIER17 EXTI_SWIER_SWIER17_Msk /*!< Software Interrupt on line 17 */ -#define EXTI_SWIER_SWIER18_Pos (18U) -#define EXTI_SWIER_SWIER18_Msk (0x1U << EXTI_SWIER_SWIER18_Pos) /*!< 0x00040000 */ -#define EXTI_SWIER_SWIER18 EXTI_SWIER_SWIER18_Msk /*!< Software Interrupt on line 18 */ -#define EXTI_SWIER_SWIER19_Pos (19U) -#define EXTI_SWIER_SWIER19_Msk (0x1U << EXTI_SWIER_SWIER19_Pos) /*!< 0x00080000 */ -#define EXTI_SWIER_SWIER19 EXTI_SWIER_SWIER19_Msk /*!< Software Interrupt on line 19 */ - -/* References Defines */ -#define EXTI_SWIER_SWI0 EXTI_SWIER_SWIER0 -#define EXTI_SWIER_SWI1 EXTI_SWIER_SWIER1 -#define EXTI_SWIER_SWI2 EXTI_SWIER_SWIER2 -#define EXTI_SWIER_SWI3 EXTI_SWIER_SWIER3 -#define EXTI_SWIER_SWI4 EXTI_SWIER_SWIER4 -#define EXTI_SWIER_SWI5 EXTI_SWIER_SWIER5 -#define EXTI_SWIER_SWI6 EXTI_SWIER_SWIER6 -#define EXTI_SWIER_SWI7 EXTI_SWIER_SWIER7 -#define EXTI_SWIER_SWI8 EXTI_SWIER_SWIER8 -#define EXTI_SWIER_SWI9 EXTI_SWIER_SWIER9 -#define EXTI_SWIER_SWI10 EXTI_SWIER_SWIER10 -#define EXTI_SWIER_SWI11 EXTI_SWIER_SWIER11 -#define EXTI_SWIER_SWI12 EXTI_SWIER_SWIER12 -#define EXTI_SWIER_SWI13 EXTI_SWIER_SWIER13 -#define EXTI_SWIER_SWI14 EXTI_SWIER_SWIER14 -#define EXTI_SWIER_SWI15 EXTI_SWIER_SWIER15 -#define EXTI_SWIER_SWI16 EXTI_SWIER_SWIER16 -#define EXTI_SWIER_SWI17 EXTI_SWIER_SWIER17 -#define EXTI_SWIER_SWI18 EXTI_SWIER_SWIER18 -#define EXTI_SWIER_SWI19 EXTI_SWIER_SWIER19 - -/******************* Bit definition for EXTI_PR register ********************/ -#define EXTI_PR_PR0_Pos (0U) -#define EXTI_PR_PR0_Msk (0x1U << EXTI_PR_PR0_Pos) /*!< 0x00000001 */ -#define EXTI_PR_PR0 EXTI_PR_PR0_Msk /*!< Pending bit for line 0 */ -#define EXTI_PR_PR1_Pos (1U) -#define EXTI_PR_PR1_Msk (0x1U << EXTI_PR_PR1_Pos) /*!< 0x00000002 */ -#define EXTI_PR_PR1 EXTI_PR_PR1_Msk /*!< Pending bit for line 1 */ -#define EXTI_PR_PR2_Pos (2U) -#define EXTI_PR_PR2_Msk (0x1U << EXTI_PR_PR2_Pos) /*!< 0x00000004 */ -#define EXTI_PR_PR2 EXTI_PR_PR2_Msk /*!< Pending bit for line 2 */ -#define EXTI_PR_PR3_Pos (3U) -#define EXTI_PR_PR3_Msk (0x1U << EXTI_PR_PR3_Pos) /*!< 0x00000008 */ -#define EXTI_PR_PR3 EXTI_PR_PR3_Msk /*!< Pending bit for line 3 */ -#define EXTI_PR_PR4_Pos (4U) -#define EXTI_PR_PR4_Msk (0x1U << EXTI_PR_PR4_Pos) /*!< 0x00000010 */ -#define EXTI_PR_PR4 EXTI_PR_PR4_Msk /*!< Pending bit for line 4 */ -#define EXTI_PR_PR5_Pos (5U) -#define EXTI_PR_PR5_Msk (0x1U << EXTI_PR_PR5_Pos) /*!< 0x00000020 */ -#define EXTI_PR_PR5 EXTI_PR_PR5_Msk /*!< Pending bit for line 5 */ -#define EXTI_PR_PR6_Pos (6U) -#define EXTI_PR_PR6_Msk (0x1U << EXTI_PR_PR6_Pos) /*!< 0x00000040 */ -#define EXTI_PR_PR6 EXTI_PR_PR6_Msk /*!< Pending bit for line 6 */ -#define EXTI_PR_PR7_Pos (7U) -#define EXTI_PR_PR7_Msk (0x1U << EXTI_PR_PR7_Pos) /*!< 0x00000080 */ -#define EXTI_PR_PR7 EXTI_PR_PR7_Msk /*!< Pending bit for line 7 */ -#define EXTI_PR_PR8_Pos (8U) -#define EXTI_PR_PR8_Msk (0x1U << EXTI_PR_PR8_Pos) /*!< 0x00000100 */ -#define EXTI_PR_PR8 EXTI_PR_PR8_Msk /*!< Pending bit for line 8 */ -#define EXTI_PR_PR9_Pos (9U) -#define EXTI_PR_PR9_Msk (0x1U << EXTI_PR_PR9_Pos) /*!< 0x00000200 */ -#define EXTI_PR_PR9 EXTI_PR_PR9_Msk /*!< Pending bit for line 9 */ -#define EXTI_PR_PR10_Pos (10U) -#define EXTI_PR_PR10_Msk (0x1U << EXTI_PR_PR10_Pos) /*!< 0x00000400 */ -#define EXTI_PR_PR10 EXTI_PR_PR10_Msk /*!< Pending bit for line 10 */ -#define EXTI_PR_PR11_Pos (11U) -#define EXTI_PR_PR11_Msk (0x1U << EXTI_PR_PR11_Pos) /*!< 0x00000800 */ -#define EXTI_PR_PR11 EXTI_PR_PR11_Msk /*!< Pending bit for line 11 */ -#define EXTI_PR_PR12_Pos (12U) -#define EXTI_PR_PR12_Msk (0x1U << EXTI_PR_PR12_Pos) /*!< 0x00001000 */ -#define EXTI_PR_PR12 EXTI_PR_PR12_Msk /*!< Pending bit for line 12 */ -#define EXTI_PR_PR13_Pos (13U) -#define EXTI_PR_PR13_Msk (0x1U << EXTI_PR_PR13_Pos) /*!< 0x00002000 */ -#define EXTI_PR_PR13 EXTI_PR_PR13_Msk /*!< Pending bit for line 13 */ -#define EXTI_PR_PR14_Pos (14U) -#define EXTI_PR_PR14_Msk (0x1U << EXTI_PR_PR14_Pos) /*!< 0x00004000 */ -#define EXTI_PR_PR14 EXTI_PR_PR14_Msk /*!< Pending bit for line 14 */ -#define EXTI_PR_PR15_Pos (15U) -#define EXTI_PR_PR15_Msk (0x1U << EXTI_PR_PR15_Pos) /*!< 0x00008000 */ -#define EXTI_PR_PR15 EXTI_PR_PR15_Msk /*!< Pending bit for line 15 */ -#define EXTI_PR_PR16_Pos (16U) -#define EXTI_PR_PR16_Msk (0x1U << EXTI_PR_PR16_Pos) /*!< 0x00010000 */ -#define EXTI_PR_PR16 EXTI_PR_PR16_Msk /*!< Pending bit for line 16 */ -#define EXTI_PR_PR17_Pos (17U) -#define EXTI_PR_PR17_Msk (0x1U << EXTI_PR_PR17_Pos) /*!< 0x00020000 */ -#define EXTI_PR_PR17 EXTI_PR_PR17_Msk /*!< Pending bit for line 17 */ -#define EXTI_PR_PR18_Pos (18U) -#define EXTI_PR_PR18_Msk (0x1U << EXTI_PR_PR18_Pos) /*!< 0x00040000 */ -#define EXTI_PR_PR18 EXTI_PR_PR18_Msk /*!< Pending bit for line 18 */ -#define EXTI_PR_PR19_Pos (19U) -#define EXTI_PR_PR19_Msk (0x1U << EXTI_PR_PR19_Pos) /*!< 0x00080000 */ -#define EXTI_PR_PR19 EXTI_PR_PR19_Msk /*!< Pending bit for line 19 */ - -/* References Defines */ -#define EXTI_PR_PIF0 EXTI_PR_PR0 -#define EXTI_PR_PIF1 EXTI_PR_PR1 -#define EXTI_PR_PIF2 EXTI_PR_PR2 -#define EXTI_PR_PIF3 EXTI_PR_PR3 -#define EXTI_PR_PIF4 EXTI_PR_PR4 -#define EXTI_PR_PIF5 EXTI_PR_PR5 -#define EXTI_PR_PIF6 EXTI_PR_PR6 -#define EXTI_PR_PIF7 EXTI_PR_PR7 -#define EXTI_PR_PIF8 EXTI_PR_PR8 -#define EXTI_PR_PIF9 EXTI_PR_PR9 -#define EXTI_PR_PIF10 EXTI_PR_PR10 -#define EXTI_PR_PIF11 EXTI_PR_PR11 -#define EXTI_PR_PIF12 EXTI_PR_PR12 -#define EXTI_PR_PIF13 EXTI_PR_PR13 -#define EXTI_PR_PIF14 EXTI_PR_PR14 -#define EXTI_PR_PIF15 EXTI_PR_PR15 -#define EXTI_PR_PIF16 EXTI_PR_PR16 -#define EXTI_PR_PIF17 EXTI_PR_PR17 -#define EXTI_PR_PIF18 EXTI_PR_PR18 -#define EXTI_PR_PIF19 EXTI_PR_PR19 - -/******************************************************************************/ -/* */ -/* DMA Controller */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for DMA_ISR register ********************/ -#define DMA_ISR_GIF1_Pos (0U) -#define DMA_ISR_GIF1_Msk (0x1U << DMA_ISR_GIF1_Pos) /*!< 0x00000001 */ -#define DMA_ISR_GIF1 DMA_ISR_GIF1_Msk /*!< Channel 1 Global interrupt flag */ -#define DMA_ISR_TCIF1_Pos (1U) -#define DMA_ISR_TCIF1_Msk (0x1U << DMA_ISR_TCIF1_Pos) /*!< 0x00000002 */ -#define DMA_ISR_TCIF1 DMA_ISR_TCIF1_Msk /*!< Channel 1 Transfer Complete flag */ -#define DMA_ISR_HTIF1_Pos (2U) -#define DMA_ISR_HTIF1_Msk (0x1U << DMA_ISR_HTIF1_Pos) /*!< 0x00000004 */ -#define DMA_ISR_HTIF1 DMA_ISR_HTIF1_Msk /*!< Channel 1 Half Transfer flag */ -#define DMA_ISR_TEIF1_Pos (3U) -#define DMA_ISR_TEIF1_Msk (0x1U << DMA_ISR_TEIF1_Pos) /*!< 0x00000008 */ -#define DMA_ISR_TEIF1 DMA_ISR_TEIF1_Msk /*!< Channel 1 Transfer Error flag */ -#define DMA_ISR_GIF2_Pos (4U) -#define DMA_ISR_GIF2_Msk (0x1U << DMA_ISR_GIF2_Pos) /*!< 0x00000010 */ -#define DMA_ISR_GIF2 DMA_ISR_GIF2_Msk /*!< Channel 2 Global interrupt flag */ -#define DMA_ISR_TCIF2_Pos (5U) -#define DMA_ISR_TCIF2_Msk (0x1U << DMA_ISR_TCIF2_Pos) /*!< 0x00000020 */ -#define DMA_ISR_TCIF2 DMA_ISR_TCIF2_Msk /*!< Channel 2 Transfer Complete flag */ -#define DMA_ISR_HTIF2_Pos (6U) -#define DMA_ISR_HTIF2_Msk (0x1U << DMA_ISR_HTIF2_Pos) /*!< 0x00000040 */ -#define DMA_ISR_HTIF2 DMA_ISR_HTIF2_Msk /*!< Channel 2 Half Transfer flag */ -#define DMA_ISR_TEIF2_Pos (7U) -#define DMA_ISR_TEIF2_Msk (0x1U << DMA_ISR_TEIF2_Pos) /*!< 0x00000080 */ -#define DMA_ISR_TEIF2 DMA_ISR_TEIF2_Msk /*!< Channel 2 Transfer Error flag */ -#define DMA_ISR_GIF3_Pos (8U) -#define DMA_ISR_GIF3_Msk (0x1U << DMA_ISR_GIF3_Pos) /*!< 0x00000100 */ -#define DMA_ISR_GIF3 DMA_ISR_GIF3_Msk /*!< Channel 3 Global interrupt flag */ -#define DMA_ISR_TCIF3_Pos (9U) -#define DMA_ISR_TCIF3_Msk (0x1U << DMA_ISR_TCIF3_Pos) /*!< 0x00000200 */ -#define DMA_ISR_TCIF3 DMA_ISR_TCIF3_Msk /*!< Channel 3 Transfer Complete flag */ -#define DMA_ISR_HTIF3_Pos (10U) -#define DMA_ISR_HTIF3_Msk (0x1U << DMA_ISR_HTIF3_Pos) /*!< 0x00000400 */ -#define DMA_ISR_HTIF3 DMA_ISR_HTIF3_Msk /*!< Channel 3 Half Transfer flag */ -#define DMA_ISR_TEIF3_Pos (11U) -#define DMA_ISR_TEIF3_Msk (0x1U << DMA_ISR_TEIF3_Pos) /*!< 0x00000800 */ -#define DMA_ISR_TEIF3 DMA_ISR_TEIF3_Msk /*!< Channel 3 Transfer Error flag */ -#define DMA_ISR_GIF4_Pos (12U) -#define DMA_ISR_GIF4_Msk (0x1U << DMA_ISR_GIF4_Pos) /*!< 0x00001000 */ -#define DMA_ISR_GIF4 DMA_ISR_GIF4_Msk /*!< Channel 4 Global interrupt flag */ -#define DMA_ISR_TCIF4_Pos (13U) -#define DMA_ISR_TCIF4_Msk (0x1U << DMA_ISR_TCIF4_Pos) /*!< 0x00002000 */ -#define DMA_ISR_TCIF4 DMA_ISR_TCIF4_Msk /*!< Channel 4 Transfer Complete flag */ -#define DMA_ISR_HTIF4_Pos (14U) -#define DMA_ISR_HTIF4_Msk (0x1U << DMA_ISR_HTIF4_Pos) /*!< 0x00004000 */ -#define DMA_ISR_HTIF4 DMA_ISR_HTIF4_Msk /*!< Channel 4 Half Transfer flag */ -#define DMA_ISR_TEIF4_Pos (15U) -#define DMA_ISR_TEIF4_Msk (0x1U << DMA_ISR_TEIF4_Pos) /*!< 0x00008000 */ -#define DMA_ISR_TEIF4 DMA_ISR_TEIF4_Msk /*!< Channel 4 Transfer Error flag */ -#define DMA_ISR_GIF5_Pos (16U) -#define DMA_ISR_GIF5_Msk (0x1U << DMA_ISR_GIF5_Pos) /*!< 0x00010000 */ -#define DMA_ISR_GIF5 DMA_ISR_GIF5_Msk /*!< Channel 5 Global interrupt flag */ -#define DMA_ISR_TCIF5_Pos (17U) -#define DMA_ISR_TCIF5_Msk (0x1U << DMA_ISR_TCIF5_Pos) /*!< 0x00020000 */ -#define DMA_ISR_TCIF5 DMA_ISR_TCIF5_Msk /*!< Channel 5 Transfer Complete flag */ -#define DMA_ISR_HTIF5_Pos (18U) -#define DMA_ISR_HTIF5_Msk (0x1U << DMA_ISR_HTIF5_Pos) /*!< 0x00040000 */ -#define DMA_ISR_HTIF5 DMA_ISR_HTIF5_Msk /*!< Channel 5 Half Transfer flag */ -#define DMA_ISR_TEIF5_Pos (19U) -#define DMA_ISR_TEIF5_Msk (0x1U << DMA_ISR_TEIF5_Pos) /*!< 0x00080000 */ -#define DMA_ISR_TEIF5 DMA_ISR_TEIF5_Msk /*!< Channel 5 Transfer Error flag */ -#define DMA_ISR_GIF6_Pos (20U) -#define DMA_ISR_GIF6_Msk (0x1U << DMA_ISR_GIF6_Pos) /*!< 0x00100000 */ -#define DMA_ISR_GIF6 DMA_ISR_GIF6_Msk /*!< Channel 6 Global interrupt flag */ -#define DMA_ISR_TCIF6_Pos (21U) -#define DMA_ISR_TCIF6_Msk (0x1U << DMA_ISR_TCIF6_Pos) /*!< 0x00200000 */ -#define DMA_ISR_TCIF6 DMA_ISR_TCIF6_Msk /*!< Channel 6 Transfer Complete flag */ -#define DMA_ISR_HTIF6_Pos (22U) -#define DMA_ISR_HTIF6_Msk (0x1U << DMA_ISR_HTIF6_Pos) /*!< 0x00400000 */ -#define DMA_ISR_HTIF6 DMA_ISR_HTIF6_Msk /*!< Channel 6 Half Transfer flag */ -#define DMA_ISR_TEIF6_Pos (23U) -#define DMA_ISR_TEIF6_Msk (0x1U << DMA_ISR_TEIF6_Pos) /*!< 0x00800000 */ -#define DMA_ISR_TEIF6 DMA_ISR_TEIF6_Msk /*!< Channel 6 Transfer Error flag */ -#define DMA_ISR_GIF7_Pos (24U) -#define DMA_ISR_GIF7_Msk (0x1U << DMA_ISR_GIF7_Pos) /*!< 0x01000000 */ -#define DMA_ISR_GIF7 DMA_ISR_GIF7_Msk /*!< Channel 7 Global interrupt flag */ -#define DMA_ISR_TCIF7_Pos (25U) -#define DMA_ISR_TCIF7_Msk (0x1U << DMA_ISR_TCIF7_Pos) /*!< 0x02000000 */ -#define DMA_ISR_TCIF7 DMA_ISR_TCIF7_Msk /*!< Channel 7 Transfer Complete flag */ -#define DMA_ISR_HTIF7_Pos (26U) -#define DMA_ISR_HTIF7_Msk (0x1U << DMA_ISR_HTIF7_Pos) /*!< 0x04000000 */ -#define DMA_ISR_HTIF7 DMA_ISR_HTIF7_Msk /*!< Channel 7 Half Transfer flag */ -#define DMA_ISR_TEIF7_Pos (27U) -#define DMA_ISR_TEIF7_Msk (0x1U << DMA_ISR_TEIF7_Pos) /*!< 0x08000000 */ -#define DMA_ISR_TEIF7 DMA_ISR_TEIF7_Msk /*!< Channel 7 Transfer Error flag */ - -/******************* Bit definition for DMA_IFCR register *******************/ -#define DMA_IFCR_CGIF1_Pos (0U) -#define DMA_IFCR_CGIF1_Msk (0x1U << DMA_IFCR_CGIF1_Pos) /*!< 0x00000001 */ -#define DMA_IFCR_CGIF1 DMA_IFCR_CGIF1_Msk /*!< Channel 1 Global interrupt clear */ -#define DMA_IFCR_CTCIF1_Pos (1U) -#define DMA_IFCR_CTCIF1_Msk (0x1U << DMA_IFCR_CTCIF1_Pos) /*!< 0x00000002 */ -#define DMA_IFCR_CTCIF1 DMA_IFCR_CTCIF1_Msk /*!< Channel 1 Transfer Complete clear */ -#define DMA_IFCR_CHTIF1_Pos (2U) -#define DMA_IFCR_CHTIF1_Msk (0x1U << DMA_IFCR_CHTIF1_Pos) /*!< 0x00000004 */ -#define DMA_IFCR_CHTIF1 DMA_IFCR_CHTIF1_Msk /*!< Channel 1 Half Transfer clear */ -#define DMA_IFCR_CTEIF1_Pos (3U) -#define DMA_IFCR_CTEIF1_Msk (0x1U << DMA_IFCR_CTEIF1_Pos) /*!< 0x00000008 */ -#define DMA_IFCR_CTEIF1 DMA_IFCR_CTEIF1_Msk /*!< Channel 1 Transfer Error clear */ -#define DMA_IFCR_CGIF2_Pos (4U) -#define DMA_IFCR_CGIF2_Msk (0x1U << DMA_IFCR_CGIF2_Pos) /*!< 0x00000010 */ -#define DMA_IFCR_CGIF2 DMA_IFCR_CGIF2_Msk /*!< Channel 2 Global interrupt clear */ -#define DMA_IFCR_CTCIF2_Pos (5U) -#define DMA_IFCR_CTCIF2_Msk (0x1U << DMA_IFCR_CTCIF2_Pos) /*!< 0x00000020 */ -#define DMA_IFCR_CTCIF2 DMA_IFCR_CTCIF2_Msk /*!< Channel 2 Transfer Complete clear */ -#define DMA_IFCR_CHTIF2_Pos (6U) -#define DMA_IFCR_CHTIF2_Msk (0x1U << DMA_IFCR_CHTIF2_Pos) /*!< 0x00000040 */ -#define DMA_IFCR_CHTIF2 DMA_IFCR_CHTIF2_Msk /*!< Channel 2 Half Transfer clear */ -#define DMA_IFCR_CTEIF2_Pos (7U) -#define DMA_IFCR_CTEIF2_Msk (0x1U << DMA_IFCR_CTEIF2_Pos) /*!< 0x00000080 */ -#define DMA_IFCR_CTEIF2 DMA_IFCR_CTEIF2_Msk /*!< Channel 2 Transfer Error clear */ -#define DMA_IFCR_CGIF3_Pos (8U) -#define DMA_IFCR_CGIF3_Msk (0x1U << DMA_IFCR_CGIF3_Pos) /*!< 0x00000100 */ -#define DMA_IFCR_CGIF3 DMA_IFCR_CGIF3_Msk /*!< Channel 3 Global interrupt clear */ -#define DMA_IFCR_CTCIF3_Pos (9U) -#define DMA_IFCR_CTCIF3_Msk (0x1U << DMA_IFCR_CTCIF3_Pos) /*!< 0x00000200 */ -#define DMA_IFCR_CTCIF3 DMA_IFCR_CTCIF3_Msk /*!< Channel 3 Transfer Complete clear */ -#define DMA_IFCR_CHTIF3_Pos (10U) -#define DMA_IFCR_CHTIF3_Msk (0x1U << DMA_IFCR_CHTIF3_Pos) /*!< 0x00000400 */ -#define DMA_IFCR_CHTIF3 DMA_IFCR_CHTIF3_Msk /*!< Channel 3 Half Transfer clear */ -#define DMA_IFCR_CTEIF3_Pos (11U) -#define DMA_IFCR_CTEIF3_Msk (0x1U << DMA_IFCR_CTEIF3_Pos) /*!< 0x00000800 */ -#define DMA_IFCR_CTEIF3 DMA_IFCR_CTEIF3_Msk /*!< Channel 3 Transfer Error clear */ -#define DMA_IFCR_CGIF4_Pos (12U) -#define DMA_IFCR_CGIF4_Msk (0x1U << DMA_IFCR_CGIF4_Pos) /*!< 0x00001000 */ -#define DMA_IFCR_CGIF4 DMA_IFCR_CGIF4_Msk /*!< Channel 4 Global interrupt clear */ -#define DMA_IFCR_CTCIF4_Pos (13U) -#define DMA_IFCR_CTCIF4_Msk (0x1U << DMA_IFCR_CTCIF4_Pos) /*!< 0x00002000 */ -#define DMA_IFCR_CTCIF4 DMA_IFCR_CTCIF4_Msk /*!< Channel 4 Transfer Complete clear */ -#define DMA_IFCR_CHTIF4_Pos (14U) -#define DMA_IFCR_CHTIF4_Msk (0x1U << DMA_IFCR_CHTIF4_Pos) /*!< 0x00004000 */ -#define DMA_IFCR_CHTIF4 DMA_IFCR_CHTIF4_Msk /*!< Channel 4 Half Transfer clear */ -#define DMA_IFCR_CTEIF4_Pos (15U) -#define DMA_IFCR_CTEIF4_Msk (0x1U << DMA_IFCR_CTEIF4_Pos) /*!< 0x00008000 */ -#define DMA_IFCR_CTEIF4 DMA_IFCR_CTEIF4_Msk /*!< Channel 4 Transfer Error clear */ -#define DMA_IFCR_CGIF5_Pos (16U) -#define DMA_IFCR_CGIF5_Msk (0x1U << DMA_IFCR_CGIF5_Pos) /*!< 0x00010000 */ -#define DMA_IFCR_CGIF5 DMA_IFCR_CGIF5_Msk /*!< Channel 5 Global interrupt clear */ -#define DMA_IFCR_CTCIF5_Pos (17U) -#define DMA_IFCR_CTCIF5_Msk (0x1U << DMA_IFCR_CTCIF5_Pos) /*!< 0x00020000 */ -#define DMA_IFCR_CTCIF5 DMA_IFCR_CTCIF5_Msk /*!< Channel 5 Transfer Complete clear */ -#define DMA_IFCR_CHTIF5_Pos (18U) -#define DMA_IFCR_CHTIF5_Msk (0x1U << DMA_IFCR_CHTIF5_Pos) /*!< 0x00040000 */ -#define DMA_IFCR_CHTIF5 DMA_IFCR_CHTIF5_Msk /*!< Channel 5 Half Transfer clear */ -#define DMA_IFCR_CTEIF5_Pos (19U) -#define DMA_IFCR_CTEIF5_Msk (0x1U << DMA_IFCR_CTEIF5_Pos) /*!< 0x00080000 */ -#define DMA_IFCR_CTEIF5 DMA_IFCR_CTEIF5_Msk /*!< Channel 5 Transfer Error clear */ -#define DMA_IFCR_CGIF6_Pos (20U) -#define DMA_IFCR_CGIF6_Msk (0x1U << DMA_IFCR_CGIF6_Pos) /*!< 0x00100000 */ -#define DMA_IFCR_CGIF6 DMA_IFCR_CGIF6_Msk /*!< Channel 6 Global interrupt clear */ -#define DMA_IFCR_CTCIF6_Pos (21U) -#define DMA_IFCR_CTCIF6_Msk (0x1U << DMA_IFCR_CTCIF6_Pos) /*!< 0x00200000 */ -#define DMA_IFCR_CTCIF6 DMA_IFCR_CTCIF6_Msk /*!< Channel 6 Transfer Complete clear */ -#define DMA_IFCR_CHTIF6_Pos (22U) -#define DMA_IFCR_CHTIF6_Msk (0x1U << DMA_IFCR_CHTIF6_Pos) /*!< 0x00400000 */ -#define DMA_IFCR_CHTIF6 DMA_IFCR_CHTIF6_Msk /*!< Channel 6 Half Transfer clear */ -#define DMA_IFCR_CTEIF6_Pos (23U) -#define DMA_IFCR_CTEIF6_Msk (0x1U << DMA_IFCR_CTEIF6_Pos) /*!< 0x00800000 */ -#define DMA_IFCR_CTEIF6 DMA_IFCR_CTEIF6_Msk /*!< Channel 6 Transfer Error clear */ -#define DMA_IFCR_CGIF7_Pos (24U) -#define DMA_IFCR_CGIF7_Msk (0x1U << DMA_IFCR_CGIF7_Pos) /*!< 0x01000000 */ -#define DMA_IFCR_CGIF7 DMA_IFCR_CGIF7_Msk /*!< Channel 7 Global interrupt clear */ -#define DMA_IFCR_CTCIF7_Pos (25U) -#define DMA_IFCR_CTCIF7_Msk (0x1U << DMA_IFCR_CTCIF7_Pos) /*!< 0x02000000 */ -#define DMA_IFCR_CTCIF7 DMA_IFCR_CTCIF7_Msk /*!< Channel 7 Transfer Complete clear */ -#define DMA_IFCR_CHTIF7_Pos (26U) -#define DMA_IFCR_CHTIF7_Msk (0x1U << DMA_IFCR_CHTIF7_Pos) /*!< 0x04000000 */ -#define DMA_IFCR_CHTIF7 DMA_IFCR_CHTIF7_Msk /*!< Channel 7 Half Transfer clear */ -#define DMA_IFCR_CTEIF7_Pos (27U) -#define DMA_IFCR_CTEIF7_Msk (0x1U << DMA_IFCR_CTEIF7_Pos) /*!< 0x08000000 */ -#define DMA_IFCR_CTEIF7 DMA_IFCR_CTEIF7_Msk /*!< Channel 7 Transfer Error clear */ - -/******************* Bit definition for DMA_CCR register *******************/ -#define DMA_CCR_EN_Pos (0U) -#define DMA_CCR_EN_Msk (0x1U << DMA_CCR_EN_Pos) /*!< 0x00000001 */ -#define DMA_CCR_EN DMA_CCR_EN_Msk /*!< Channel enable */ -#define DMA_CCR_TCIE_Pos (1U) -#define DMA_CCR_TCIE_Msk (0x1U << DMA_CCR_TCIE_Pos) /*!< 0x00000002 */ -#define DMA_CCR_TCIE DMA_CCR_TCIE_Msk /*!< Transfer complete interrupt enable */ -#define DMA_CCR_HTIE_Pos (2U) -#define DMA_CCR_HTIE_Msk (0x1U << DMA_CCR_HTIE_Pos) /*!< 0x00000004 */ -#define DMA_CCR_HTIE DMA_CCR_HTIE_Msk /*!< Half Transfer interrupt enable */ -#define DMA_CCR_TEIE_Pos (3U) -#define DMA_CCR_TEIE_Msk (0x1U << DMA_CCR_TEIE_Pos) /*!< 0x00000008 */ -#define DMA_CCR_TEIE DMA_CCR_TEIE_Msk /*!< Transfer error interrupt enable */ -#define DMA_CCR_DIR_Pos (4U) -#define DMA_CCR_DIR_Msk (0x1U << DMA_CCR_DIR_Pos) /*!< 0x00000010 */ -#define DMA_CCR_DIR DMA_CCR_DIR_Msk /*!< Data transfer direction */ -#define DMA_CCR_CIRC_Pos (5U) -#define DMA_CCR_CIRC_Msk (0x1U << DMA_CCR_CIRC_Pos) /*!< 0x00000020 */ -#define DMA_CCR_CIRC DMA_CCR_CIRC_Msk /*!< Circular mode */ -#define DMA_CCR_PINC_Pos (6U) -#define DMA_CCR_PINC_Msk (0x1U << DMA_CCR_PINC_Pos) /*!< 0x00000040 */ -#define DMA_CCR_PINC DMA_CCR_PINC_Msk /*!< Peripheral increment mode */ -#define DMA_CCR_MINC_Pos (7U) -#define DMA_CCR_MINC_Msk (0x1U << DMA_CCR_MINC_Pos) /*!< 0x00000080 */ -#define DMA_CCR_MINC DMA_CCR_MINC_Msk /*!< Memory increment mode */ - -#define DMA_CCR_PSIZE_Pos (8U) -#define DMA_CCR_PSIZE_Msk (0x3U << DMA_CCR_PSIZE_Pos) /*!< 0x00000300 */ -#define DMA_CCR_PSIZE DMA_CCR_PSIZE_Msk /*!< PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR_PSIZE_0 (0x1U << DMA_CCR_PSIZE_Pos) /*!< 0x00000100 */ -#define DMA_CCR_PSIZE_1 (0x2U << DMA_CCR_PSIZE_Pos) /*!< 0x00000200 */ - -#define DMA_CCR_MSIZE_Pos (10U) -#define DMA_CCR_MSIZE_Msk (0x3U << DMA_CCR_MSIZE_Pos) /*!< 0x00000C00 */ -#define DMA_CCR_MSIZE DMA_CCR_MSIZE_Msk /*!< MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR_MSIZE_0 (0x1U << DMA_CCR_MSIZE_Pos) /*!< 0x00000400 */ -#define DMA_CCR_MSIZE_1 (0x2U << DMA_CCR_MSIZE_Pos) /*!< 0x00000800 */ - -#define DMA_CCR_PL_Pos (12U) -#define DMA_CCR_PL_Msk (0x3U << DMA_CCR_PL_Pos) /*!< 0x00003000 */ -#define DMA_CCR_PL DMA_CCR_PL_Msk /*!< PL[1:0] bits(Channel Priority level) */ -#define DMA_CCR_PL_0 (0x1U << DMA_CCR_PL_Pos) /*!< 0x00001000 */ -#define DMA_CCR_PL_1 (0x2U << DMA_CCR_PL_Pos) /*!< 0x00002000 */ - -#define DMA_CCR_MEM2MEM_Pos (14U) -#define DMA_CCR_MEM2MEM_Msk (0x1U << DMA_CCR_MEM2MEM_Pos) /*!< 0x00004000 */ -#define DMA_CCR_MEM2MEM DMA_CCR_MEM2MEM_Msk /*!< Memory to memory mode */ - -/****************** Bit definition for DMA_CNDTR register ******************/ -#define DMA_CNDTR_NDT_Pos (0U) -#define DMA_CNDTR_NDT_Msk (0xFFFFU << DMA_CNDTR_NDT_Pos) /*!< 0x0000FFFF */ -#define DMA_CNDTR_NDT DMA_CNDTR_NDT_Msk /*!< Number of data to Transfer */ - -/****************** Bit definition for DMA_CPAR register *******************/ -#define DMA_CPAR_PA_Pos (0U) -#define DMA_CPAR_PA_Msk (0xFFFFFFFFU << DMA_CPAR_PA_Pos) /*!< 0xFFFFFFFF */ -#define DMA_CPAR_PA DMA_CPAR_PA_Msk /*!< Peripheral Address */ - -/****************** Bit definition for DMA_CMAR register *******************/ -#define DMA_CMAR_MA_Pos (0U) -#define DMA_CMAR_MA_Msk (0xFFFFFFFFU << DMA_CMAR_MA_Pos) /*!< 0xFFFFFFFF */ -#define DMA_CMAR_MA DMA_CMAR_MA_Msk /*!< Memory Address */ - -/******************************************************************************/ -/* */ -/* Analog to Digital Converter (ADC) */ -/* */ -/******************************************************************************/ - -/* - * @brief Specific device feature definitions (not present on all devices in the STM32F1 family) - */ -#define ADC_MULTIMODE_SUPPORT /*!< ADC feature available only on specific devices: multimode available on devices with several ADC instances */ - -/******************** Bit definition for ADC_SR register ********************/ -#define ADC_SR_AWD_Pos (0U) -#define ADC_SR_AWD_Msk (0x1U << ADC_SR_AWD_Pos) /*!< 0x00000001 */ -#define ADC_SR_AWD ADC_SR_AWD_Msk /*!< ADC analog watchdog 1 flag */ -#define ADC_SR_EOS_Pos (1U) -#define ADC_SR_EOS_Msk (0x1U << ADC_SR_EOS_Pos) /*!< 0x00000002 */ -#define ADC_SR_EOS ADC_SR_EOS_Msk /*!< ADC group regular end of sequence conversions flag */ -#define ADC_SR_JEOS_Pos (2U) -#define ADC_SR_JEOS_Msk (0x1U << ADC_SR_JEOS_Pos) /*!< 0x00000004 */ -#define ADC_SR_JEOS ADC_SR_JEOS_Msk /*!< ADC group injected end of sequence conversions flag */ -#define ADC_SR_JSTRT_Pos (3U) -#define ADC_SR_JSTRT_Msk (0x1U << ADC_SR_JSTRT_Pos) /*!< 0x00000008 */ -#define ADC_SR_JSTRT ADC_SR_JSTRT_Msk /*!< ADC group injected conversion start flag */ -#define ADC_SR_STRT_Pos (4U) -#define ADC_SR_STRT_Msk (0x1U << ADC_SR_STRT_Pos) /*!< 0x00000010 */ -#define ADC_SR_STRT ADC_SR_STRT_Msk /*!< ADC group regular conversion start flag */ - -/* Legacy defines */ -#define ADC_SR_EOC (ADC_SR_EOS) -#define ADC_SR_JEOC (ADC_SR_JEOS) - -/******************* Bit definition for ADC_CR1 register ********************/ -#define ADC_CR1_AWDCH_Pos (0U) -#define ADC_CR1_AWDCH_Msk (0x1FU << ADC_CR1_AWDCH_Pos) /*!< 0x0000001F */ -#define ADC_CR1_AWDCH ADC_CR1_AWDCH_Msk /*!< ADC analog watchdog 1 monitored channel selection */ -#define ADC_CR1_AWDCH_0 (0x01U << ADC_CR1_AWDCH_Pos) /*!< 0x00000001 */ -#define ADC_CR1_AWDCH_1 (0x02U << ADC_CR1_AWDCH_Pos) /*!< 0x00000002 */ -#define ADC_CR1_AWDCH_2 (0x04U << ADC_CR1_AWDCH_Pos) /*!< 0x00000004 */ -#define ADC_CR1_AWDCH_3 (0x08U << ADC_CR1_AWDCH_Pos) /*!< 0x00000008 */ -#define ADC_CR1_AWDCH_4 (0x10U << ADC_CR1_AWDCH_Pos) /*!< 0x00000010 */ - -#define ADC_CR1_EOSIE_Pos (5U) -#define ADC_CR1_EOSIE_Msk (0x1U << ADC_CR1_EOSIE_Pos) /*!< 0x00000020 */ -#define ADC_CR1_EOSIE ADC_CR1_EOSIE_Msk /*!< ADC group regular end of sequence conversions interrupt */ -#define ADC_CR1_AWDIE_Pos (6U) -#define ADC_CR1_AWDIE_Msk (0x1U << ADC_CR1_AWDIE_Pos) /*!< 0x00000040 */ -#define ADC_CR1_AWDIE ADC_CR1_AWDIE_Msk /*!< ADC analog watchdog 1 interrupt */ -#define ADC_CR1_JEOSIE_Pos (7U) -#define ADC_CR1_JEOSIE_Msk (0x1U << ADC_CR1_JEOSIE_Pos) /*!< 0x00000080 */ -#define ADC_CR1_JEOSIE ADC_CR1_JEOSIE_Msk /*!< ADC group injected end of sequence conversions interrupt */ -#define ADC_CR1_SCAN_Pos (8U) -#define ADC_CR1_SCAN_Msk (0x1U << ADC_CR1_SCAN_Pos) /*!< 0x00000100 */ -#define ADC_CR1_SCAN ADC_CR1_SCAN_Msk /*!< ADC scan mode */ -#define ADC_CR1_AWDSGL_Pos (9U) -#define ADC_CR1_AWDSGL_Msk (0x1U << ADC_CR1_AWDSGL_Pos) /*!< 0x00000200 */ -#define ADC_CR1_AWDSGL ADC_CR1_AWDSGL_Msk /*!< ADC analog watchdog 1 monitoring a single channel or all channels */ -#define ADC_CR1_JAUTO_Pos (10U) -#define ADC_CR1_JAUTO_Msk (0x1U << ADC_CR1_JAUTO_Pos) /*!< 0x00000400 */ -#define ADC_CR1_JAUTO ADC_CR1_JAUTO_Msk /*!< ADC group injected automatic trigger mode */ -#define ADC_CR1_DISCEN_Pos (11U) -#define ADC_CR1_DISCEN_Msk (0x1U << ADC_CR1_DISCEN_Pos) /*!< 0x00000800 */ -#define ADC_CR1_DISCEN ADC_CR1_DISCEN_Msk /*!< ADC group regular sequencer discontinuous mode */ -#define ADC_CR1_JDISCEN_Pos (12U) -#define ADC_CR1_JDISCEN_Msk (0x1U << ADC_CR1_JDISCEN_Pos) /*!< 0x00001000 */ -#define ADC_CR1_JDISCEN ADC_CR1_JDISCEN_Msk /*!< ADC group injected sequencer discontinuous mode */ - -#define ADC_CR1_DISCNUM_Pos (13U) -#define ADC_CR1_DISCNUM_Msk (0x7U << ADC_CR1_DISCNUM_Pos) /*!< 0x0000E000 */ -#define ADC_CR1_DISCNUM ADC_CR1_DISCNUM_Msk /*!< ADC group regular sequencer discontinuous number of ranks */ -#define ADC_CR1_DISCNUM_0 (0x1U << ADC_CR1_DISCNUM_Pos) /*!< 0x00002000 */ -#define ADC_CR1_DISCNUM_1 (0x2U << ADC_CR1_DISCNUM_Pos) /*!< 0x00004000 */ -#define ADC_CR1_DISCNUM_2 (0x4U << ADC_CR1_DISCNUM_Pos) /*!< 0x00008000 */ - -#define ADC_CR1_DUALMOD_Pos (16U) -#define ADC_CR1_DUALMOD_Msk (0xFU << ADC_CR1_DUALMOD_Pos) /*!< 0x000F0000 */ -#define ADC_CR1_DUALMOD ADC_CR1_DUALMOD_Msk /*!< ADC multimode mode selection */ -#define ADC_CR1_DUALMOD_0 (0x1U << ADC_CR1_DUALMOD_Pos) /*!< 0x00010000 */ -#define ADC_CR1_DUALMOD_1 (0x2U << ADC_CR1_DUALMOD_Pos) /*!< 0x00020000 */ -#define ADC_CR1_DUALMOD_2 (0x4U << ADC_CR1_DUALMOD_Pos) /*!< 0x00040000 */ -#define ADC_CR1_DUALMOD_3 (0x8U << ADC_CR1_DUALMOD_Pos) /*!< 0x00080000 */ - -#define ADC_CR1_JAWDEN_Pos (22U) -#define ADC_CR1_JAWDEN_Msk (0x1U << ADC_CR1_JAWDEN_Pos) /*!< 0x00400000 */ -#define ADC_CR1_JAWDEN ADC_CR1_JAWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group injected */ -#define ADC_CR1_AWDEN_Pos (23U) -#define ADC_CR1_AWDEN_Msk (0x1U << ADC_CR1_AWDEN_Pos) /*!< 0x00800000 */ -#define ADC_CR1_AWDEN ADC_CR1_AWDEN_Msk /*!< ADC analog watchdog 1 enable on scope ADC group regular */ - -/* Legacy defines */ -#define ADC_CR1_EOCIE (ADC_CR1_EOSIE) -#define ADC_CR1_JEOCIE (ADC_CR1_JEOSIE) - -/******************* Bit definition for ADC_CR2 register ********************/ -#define ADC_CR2_ADON_Pos (0U) -#define ADC_CR2_ADON_Msk (0x1U << ADC_CR2_ADON_Pos) /*!< 0x00000001 */ -#define ADC_CR2_ADON ADC_CR2_ADON_Msk /*!< ADC enable */ -#define ADC_CR2_CONT_Pos (1U) -#define ADC_CR2_CONT_Msk (0x1U << ADC_CR2_CONT_Pos) /*!< 0x00000002 */ -#define ADC_CR2_CONT ADC_CR2_CONT_Msk /*!< ADC group regular continuous conversion mode */ -#define ADC_CR2_CAL_Pos (2U) -#define ADC_CR2_CAL_Msk (0x1U << ADC_CR2_CAL_Pos) /*!< 0x00000004 */ -#define ADC_CR2_CAL ADC_CR2_CAL_Msk /*!< ADC calibration start */ -#define ADC_CR2_RSTCAL_Pos (3U) -#define ADC_CR2_RSTCAL_Msk (0x1U << ADC_CR2_RSTCAL_Pos) /*!< 0x00000008 */ -#define ADC_CR2_RSTCAL ADC_CR2_RSTCAL_Msk /*!< ADC calibration reset */ -#define ADC_CR2_DMA_Pos (8U) -#define ADC_CR2_DMA_Msk (0x1U << ADC_CR2_DMA_Pos) /*!< 0x00000100 */ -#define ADC_CR2_DMA ADC_CR2_DMA_Msk /*!< ADC DMA transfer enable */ -#define ADC_CR2_ALIGN_Pos (11U) -#define ADC_CR2_ALIGN_Msk (0x1U << ADC_CR2_ALIGN_Pos) /*!< 0x00000800 */ -#define ADC_CR2_ALIGN ADC_CR2_ALIGN_Msk /*!< ADC data alignement */ - -#define ADC_CR2_JEXTSEL_Pos (12U) -#define ADC_CR2_JEXTSEL_Msk (0x7U << ADC_CR2_JEXTSEL_Pos) /*!< 0x00007000 */ -#define ADC_CR2_JEXTSEL ADC_CR2_JEXTSEL_Msk /*!< ADC group injected external trigger source */ -#define ADC_CR2_JEXTSEL_0 (0x1U << ADC_CR2_JEXTSEL_Pos) /*!< 0x00001000 */ -#define ADC_CR2_JEXTSEL_1 (0x2U << ADC_CR2_JEXTSEL_Pos) /*!< 0x00002000 */ -#define ADC_CR2_JEXTSEL_2 (0x4U << ADC_CR2_JEXTSEL_Pos) /*!< 0x00004000 */ - -#define ADC_CR2_JEXTTRIG_Pos (15U) -#define ADC_CR2_JEXTTRIG_Msk (0x1U << ADC_CR2_JEXTTRIG_Pos) /*!< 0x00008000 */ -#define ADC_CR2_JEXTTRIG ADC_CR2_JEXTTRIG_Msk /*!< ADC group injected external trigger enable */ - -#define ADC_CR2_EXTSEL_Pos (17U) -#define ADC_CR2_EXTSEL_Msk (0x7U << ADC_CR2_EXTSEL_Pos) /*!< 0x000E0000 */ -#define ADC_CR2_EXTSEL ADC_CR2_EXTSEL_Msk /*!< ADC group regular external trigger source */ -#define ADC_CR2_EXTSEL_0 (0x1U << ADC_CR2_EXTSEL_Pos) /*!< 0x00020000 */ -#define ADC_CR2_EXTSEL_1 (0x2U << ADC_CR2_EXTSEL_Pos) /*!< 0x00040000 */ -#define ADC_CR2_EXTSEL_2 (0x4U << ADC_CR2_EXTSEL_Pos) /*!< 0x00080000 */ - -#define ADC_CR2_EXTTRIG_Pos (20U) -#define ADC_CR2_EXTTRIG_Msk (0x1U << ADC_CR2_EXTTRIG_Pos) /*!< 0x00100000 */ -#define ADC_CR2_EXTTRIG ADC_CR2_EXTTRIG_Msk /*!< ADC group regular external trigger enable */ -#define ADC_CR2_JSWSTART_Pos (21U) -#define ADC_CR2_JSWSTART_Msk (0x1U << ADC_CR2_JSWSTART_Pos) /*!< 0x00200000 */ -#define ADC_CR2_JSWSTART ADC_CR2_JSWSTART_Msk /*!< ADC group injected conversion start */ -#define ADC_CR2_SWSTART_Pos (22U) -#define ADC_CR2_SWSTART_Msk (0x1U << ADC_CR2_SWSTART_Pos) /*!< 0x00400000 */ -#define ADC_CR2_SWSTART ADC_CR2_SWSTART_Msk /*!< ADC group regular conversion start */ -#define ADC_CR2_TSVREFE_Pos (23U) -#define ADC_CR2_TSVREFE_Msk (0x1U << ADC_CR2_TSVREFE_Pos) /*!< 0x00800000 */ -#define ADC_CR2_TSVREFE ADC_CR2_TSVREFE_Msk /*!< ADC internal path to VrefInt and temperature sensor enable */ - -/****************** Bit definition for ADC_SMPR1 register *******************/ -#define ADC_SMPR1_SMP10_Pos (0U) -#define ADC_SMPR1_SMP10_Msk (0x7U << ADC_SMPR1_SMP10_Pos) /*!< 0x00000007 */ -#define ADC_SMPR1_SMP10 ADC_SMPR1_SMP10_Msk /*!< ADC channel 10 sampling time selection */ -#define ADC_SMPR1_SMP10_0 (0x1U << ADC_SMPR1_SMP10_Pos) /*!< 0x00000001 */ -#define ADC_SMPR1_SMP10_1 (0x2U << ADC_SMPR1_SMP10_Pos) /*!< 0x00000002 */ -#define ADC_SMPR1_SMP10_2 (0x4U << ADC_SMPR1_SMP10_Pos) /*!< 0x00000004 */ - -#define ADC_SMPR1_SMP11_Pos (3U) -#define ADC_SMPR1_SMP11_Msk (0x7U << ADC_SMPR1_SMP11_Pos) /*!< 0x00000038 */ -#define ADC_SMPR1_SMP11 ADC_SMPR1_SMP11_Msk /*!< ADC channel 11 sampling time selection */ -#define ADC_SMPR1_SMP11_0 (0x1U << ADC_SMPR1_SMP11_Pos) /*!< 0x00000008 */ -#define ADC_SMPR1_SMP11_1 (0x2U << ADC_SMPR1_SMP11_Pos) /*!< 0x00000010 */ -#define ADC_SMPR1_SMP11_2 (0x4U << ADC_SMPR1_SMP11_Pos) /*!< 0x00000020 */ - -#define ADC_SMPR1_SMP12_Pos (6U) -#define ADC_SMPR1_SMP12_Msk (0x7U << ADC_SMPR1_SMP12_Pos) /*!< 0x000001C0 */ -#define ADC_SMPR1_SMP12 ADC_SMPR1_SMP12_Msk /*!< ADC channel 12 sampling time selection */ -#define ADC_SMPR1_SMP12_0 (0x1U << ADC_SMPR1_SMP12_Pos) /*!< 0x00000040 */ -#define ADC_SMPR1_SMP12_1 (0x2U << ADC_SMPR1_SMP12_Pos) /*!< 0x00000080 */ -#define ADC_SMPR1_SMP12_2 (0x4U << ADC_SMPR1_SMP12_Pos) /*!< 0x00000100 */ - -#define ADC_SMPR1_SMP13_Pos (9U) -#define ADC_SMPR1_SMP13_Msk (0x7U << ADC_SMPR1_SMP13_Pos) /*!< 0x00000E00 */ -#define ADC_SMPR1_SMP13 ADC_SMPR1_SMP13_Msk /*!< ADC channel 13 sampling time selection */ -#define ADC_SMPR1_SMP13_0 (0x1U << ADC_SMPR1_SMP13_Pos) /*!< 0x00000200 */ -#define ADC_SMPR1_SMP13_1 (0x2U << ADC_SMPR1_SMP13_Pos) /*!< 0x00000400 */ -#define ADC_SMPR1_SMP13_2 (0x4U << ADC_SMPR1_SMP13_Pos) /*!< 0x00000800 */ - -#define ADC_SMPR1_SMP14_Pos (12U) -#define ADC_SMPR1_SMP14_Msk (0x7U << ADC_SMPR1_SMP14_Pos) /*!< 0x00007000 */ -#define ADC_SMPR1_SMP14 ADC_SMPR1_SMP14_Msk /*!< ADC channel 14 sampling time selection */ -#define ADC_SMPR1_SMP14_0 (0x1U << ADC_SMPR1_SMP14_Pos) /*!< 0x00001000 */ -#define ADC_SMPR1_SMP14_1 (0x2U << ADC_SMPR1_SMP14_Pos) /*!< 0x00002000 */ -#define ADC_SMPR1_SMP14_2 (0x4U << ADC_SMPR1_SMP14_Pos) /*!< 0x00004000 */ - -#define ADC_SMPR1_SMP15_Pos (15U) -#define ADC_SMPR1_SMP15_Msk (0x7U << ADC_SMPR1_SMP15_Pos) /*!< 0x00038000 */ -#define ADC_SMPR1_SMP15 ADC_SMPR1_SMP15_Msk /*!< ADC channel 15 sampling time selection */ -#define ADC_SMPR1_SMP15_0 (0x1U << ADC_SMPR1_SMP15_Pos) /*!< 0x00008000 */ -#define ADC_SMPR1_SMP15_1 (0x2U << ADC_SMPR1_SMP15_Pos) /*!< 0x00010000 */ -#define ADC_SMPR1_SMP15_2 (0x4U << ADC_SMPR1_SMP15_Pos) /*!< 0x00020000 */ - -#define ADC_SMPR1_SMP16_Pos (18U) -#define ADC_SMPR1_SMP16_Msk (0x7U << ADC_SMPR1_SMP16_Pos) /*!< 0x001C0000 */ -#define ADC_SMPR1_SMP16 ADC_SMPR1_SMP16_Msk /*!< ADC channel 16 sampling time selection */ -#define ADC_SMPR1_SMP16_0 (0x1U << ADC_SMPR1_SMP16_Pos) /*!< 0x00040000 */ -#define ADC_SMPR1_SMP16_1 (0x2U << ADC_SMPR1_SMP16_Pos) /*!< 0x00080000 */ -#define ADC_SMPR1_SMP16_2 (0x4U << ADC_SMPR1_SMP16_Pos) /*!< 0x00100000 */ - -#define ADC_SMPR1_SMP17_Pos (21U) -#define ADC_SMPR1_SMP17_Msk (0x7U << ADC_SMPR1_SMP17_Pos) /*!< 0x00E00000 */ -#define ADC_SMPR1_SMP17 ADC_SMPR1_SMP17_Msk /*!< ADC channel 17 sampling time selection */ -#define ADC_SMPR1_SMP17_0 (0x1U << ADC_SMPR1_SMP17_Pos) /*!< 0x00200000 */ -#define ADC_SMPR1_SMP17_1 (0x2U << ADC_SMPR1_SMP17_Pos) /*!< 0x00400000 */ -#define ADC_SMPR1_SMP17_2 (0x4U << ADC_SMPR1_SMP17_Pos) /*!< 0x00800000 */ - -/****************** Bit definition for ADC_SMPR2 register *******************/ -#define ADC_SMPR2_SMP0_Pos (0U) -#define ADC_SMPR2_SMP0_Msk (0x7U << ADC_SMPR2_SMP0_Pos) /*!< 0x00000007 */ -#define ADC_SMPR2_SMP0 ADC_SMPR2_SMP0_Msk /*!< ADC channel 0 sampling time selection */ -#define ADC_SMPR2_SMP0_0 (0x1U << ADC_SMPR2_SMP0_Pos) /*!< 0x00000001 */ -#define ADC_SMPR2_SMP0_1 (0x2U << ADC_SMPR2_SMP0_Pos) /*!< 0x00000002 */ -#define ADC_SMPR2_SMP0_2 (0x4U << ADC_SMPR2_SMP0_Pos) /*!< 0x00000004 */ - -#define ADC_SMPR2_SMP1_Pos (3U) -#define ADC_SMPR2_SMP1_Msk (0x7U << ADC_SMPR2_SMP1_Pos) /*!< 0x00000038 */ -#define ADC_SMPR2_SMP1 ADC_SMPR2_SMP1_Msk /*!< ADC channel 1 sampling time selection */ -#define ADC_SMPR2_SMP1_0 (0x1U << ADC_SMPR2_SMP1_Pos) /*!< 0x00000008 */ -#define ADC_SMPR2_SMP1_1 (0x2U << ADC_SMPR2_SMP1_Pos) /*!< 0x00000010 */ -#define ADC_SMPR2_SMP1_2 (0x4U << ADC_SMPR2_SMP1_Pos) /*!< 0x00000020 */ - -#define ADC_SMPR2_SMP2_Pos (6U) -#define ADC_SMPR2_SMP2_Msk (0x7U << ADC_SMPR2_SMP2_Pos) /*!< 0x000001C0 */ -#define ADC_SMPR2_SMP2 ADC_SMPR2_SMP2_Msk /*!< ADC channel 2 sampling time selection */ -#define ADC_SMPR2_SMP2_0 (0x1U << ADC_SMPR2_SMP2_Pos) /*!< 0x00000040 */ -#define ADC_SMPR2_SMP2_1 (0x2U << ADC_SMPR2_SMP2_Pos) /*!< 0x00000080 */ -#define ADC_SMPR2_SMP2_2 (0x4U << ADC_SMPR2_SMP2_Pos) /*!< 0x00000100 */ - -#define ADC_SMPR2_SMP3_Pos (9U) -#define ADC_SMPR2_SMP3_Msk (0x7U << ADC_SMPR2_SMP3_Pos) /*!< 0x00000E00 */ -#define ADC_SMPR2_SMP3 ADC_SMPR2_SMP3_Msk /*!< ADC channel 3 sampling time selection */ -#define ADC_SMPR2_SMP3_0 (0x1U << ADC_SMPR2_SMP3_Pos) /*!< 0x00000200 */ -#define ADC_SMPR2_SMP3_1 (0x2U << ADC_SMPR2_SMP3_Pos) /*!< 0x00000400 */ -#define ADC_SMPR2_SMP3_2 (0x4U << ADC_SMPR2_SMP3_Pos) /*!< 0x00000800 */ - -#define ADC_SMPR2_SMP4_Pos (12U) -#define ADC_SMPR2_SMP4_Msk (0x7U << ADC_SMPR2_SMP4_Pos) /*!< 0x00007000 */ -#define ADC_SMPR2_SMP4 ADC_SMPR2_SMP4_Msk /*!< ADC channel 4 sampling time selection */ -#define ADC_SMPR2_SMP4_0 (0x1U << ADC_SMPR2_SMP4_Pos) /*!< 0x00001000 */ -#define ADC_SMPR2_SMP4_1 (0x2U << ADC_SMPR2_SMP4_Pos) /*!< 0x00002000 */ -#define ADC_SMPR2_SMP4_2 (0x4U << ADC_SMPR2_SMP4_Pos) /*!< 0x00004000 */ - -#define ADC_SMPR2_SMP5_Pos (15U) -#define ADC_SMPR2_SMP5_Msk (0x7U << ADC_SMPR2_SMP5_Pos) /*!< 0x00038000 */ -#define ADC_SMPR2_SMP5 ADC_SMPR2_SMP5_Msk /*!< ADC channel 5 sampling time selection */ -#define ADC_SMPR2_SMP5_0 (0x1U << ADC_SMPR2_SMP5_Pos) /*!< 0x00008000 */ -#define ADC_SMPR2_SMP5_1 (0x2U << ADC_SMPR2_SMP5_Pos) /*!< 0x00010000 */ -#define ADC_SMPR2_SMP5_2 (0x4U << ADC_SMPR2_SMP5_Pos) /*!< 0x00020000 */ - -#define ADC_SMPR2_SMP6_Pos (18U) -#define ADC_SMPR2_SMP6_Msk (0x7U << ADC_SMPR2_SMP6_Pos) /*!< 0x001C0000 */ -#define ADC_SMPR2_SMP6 ADC_SMPR2_SMP6_Msk /*!< ADC channel 6 sampling time selection */ -#define ADC_SMPR2_SMP6_0 (0x1U << ADC_SMPR2_SMP6_Pos) /*!< 0x00040000 */ -#define ADC_SMPR2_SMP6_1 (0x2U << ADC_SMPR2_SMP6_Pos) /*!< 0x00080000 */ -#define ADC_SMPR2_SMP6_2 (0x4U << ADC_SMPR2_SMP6_Pos) /*!< 0x00100000 */ - -#define ADC_SMPR2_SMP7_Pos (21U) -#define ADC_SMPR2_SMP7_Msk (0x7U << ADC_SMPR2_SMP7_Pos) /*!< 0x00E00000 */ -#define ADC_SMPR2_SMP7 ADC_SMPR2_SMP7_Msk /*!< ADC channel 7 sampling time selection */ -#define ADC_SMPR2_SMP7_0 (0x1U << ADC_SMPR2_SMP7_Pos) /*!< 0x00200000 */ -#define ADC_SMPR2_SMP7_1 (0x2U << ADC_SMPR2_SMP7_Pos) /*!< 0x00400000 */ -#define ADC_SMPR2_SMP7_2 (0x4U << ADC_SMPR2_SMP7_Pos) /*!< 0x00800000 */ - -#define ADC_SMPR2_SMP8_Pos (24U) -#define ADC_SMPR2_SMP8_Msk (0x7U << ADC_SMPR2_SMP8_Pos) /*!< 0x07000000 */ -#define ADC_SMPR2_SMP8 ADC_SMPR2_SMP8_Msk /*!< ADC channel 8 sampling time selection */ -#define ADC_SMPR2_SMP8_0 (0x1U << ADC_SMPR2_SMP8_Pos) /*!< 0x01000000 */ -#define ADC_SMPR2_SMP8_1 (0x2U << ADC_SMPR2_SMP8_Pos) /*!< 0x02000000 */ -#define ADC_SMPR2_SMP8_2 (0x4U << ADC_SMPR2_SMP8_Pos) /*!< 0x04000000 */ - -#define ADC_SMPR2_SMP9_Pos (27U) -#define ADC_SMPR2_SMP9_Msk (0x7U << ADC_SMPR2_SMP9_Pos) /*!< 0x38000000 */ -#define ADC_SMPR2_SMP9 ADC_SMPR2_SMP9_Msk /*!< ADC channel 9 sampling time selection */ -#define ADC_SMPR2_SMP9_0 (0x1U << ADC_SMPR2_SMP9_Pos) /*!< 0x08000000 */ -#define ADC_SMPR2_SMP9_1 (0x2U << ADC_SMPR2_SMP9_Pos) /*!< 0x10000000 */ -#define ADC_SMPR2_SMP9_2 (0x4U << ADC_SMPR2_SMP9_Pos) /*!< 0x20000000 */ - -/****************** Bit definition for ADC_JOFR1 register *******************/ -#define ADC_JOFR1_JOFFSET1_Pos (0U) -#define ADC_JOFR1_JOFFSET1_Msk (0xFFFU << ADC_JOFR1_JOFFSET1_Pos) /*!< 0x00000FFF */ -#define ADC_JOFR1_JOFFSET1 ADC_JOFR1_JOFFSET1_Msk /*!< ADC group injected sequencer rank 1 offset value */ - -/****************** Bit definition for ADC_JOFR2 register *******************/ -#define ADC_JOFR2_JOFFSET2_Pos (0U) -#define ADC_JOFR2_JOFFSET2_Msk (0xFFFU << ADC_JOFR2_JOFFSET2_Pos) /*!< 0x00000FFF */ -#define ADC_JOFR2_JOFFSET2 ADC_JOFR2_JOFFSET2_Msk /*!< ADC group injected sequencer rank 2 offset value */ - -/****************** Bit definition for ADC_JOFR3 register *******************/ -#define ADC_JOFR3_JOFFSET3_Pos (0U) -#define ADC_JOFR3_JOFFSET3_Msk (0xFFFU << ADC_JOFR3_JOFFSET3_Pos) /*!< 0x00000FFF */ -#define ADC_JOFR3_JOFFSET3 ADC_JOFR3_JOFFSET3_Msk /*!< ADC group injected sequencer rank 3 offset value */ - -/****************** Bit definition for ADC_JOFR4 register *******************/ -#define ADC_JOFR4_JOFFSET4_Pos (0U) -#define ADC_JOFR4_JOFFSET4_Msk (0xFFFU << ADC_JOFR4_JOFFSET4_Pos) /*!< 0x00000FFF */ -#define ADC_JOFR4_JOFFSET4 ADC_JOFR4_JOFFSET4_Msk /*!< ADC group injected sequencer rank 4 offset value */ - -/******************* Bit definition for ADC_HTR register ********************/ -#define ADC_HTR_HT_Pos (0U) -#define ADC_HTR_HT_Msk (0xFFFU << ADC_HTR_HT_Pos) /*!< 0x00000FFF */ -#define ADC_HTR_HT ADC_HTR_HT_Msk /*!< ADC analog watchdog 1 threshold high */ - -/******************* Bit definition for ADC_LTR register ********************/ -#define ADC_LTR_LT_Pos (0U) -#define ADC_LTR_LT_Msk (0xFFFU << ADC_LTR_LT_Pos) /*!< 0x00000FFF */ -#define ADC_LTR_LT ADC_LTR_LT_Msk /*!< ADC analog watchdog 1 threshold low */ - -/******************* Bit definition for ADC_SQR1 register *******************/ -#define ADC_SQR1_SQ13_Pos (0U) -#define ADC_SQR1_SQ13_Msk (0x1FU << ADC_SQR1_SQ13_Pos) /*!< 0x0000001F */ -#define ADC_SQR1_SQ13 ADC_SQR1_SQ13_Msk /*!< ADC group regular sequencer rank 13 */ -#define ADC_SQR1_SQ13_0 (0x01U << ADC_SQR1_SQ13_Pos) /*!< 0x00000001 */ -#define ADC_SQR1_SQ13_1 (0x02U << ADC_SQR1_SQ13_Pos) /*!< 0x00000002 */ -#define ADC_SQR1_SQ13_2 (0x04U << ADC_SQR1_SQ13_Pos) /*!< 0x00000004 */ -#define ADC_SQR1_SQ13_3 (0x08U << ADC_SQR1_SQ13_Pos) /*!< 0x00000008 */ -#define ADC_SQR1_SQ13_4 (0x10U << ADC_SQR1_SQ13_Pos) /*!< 0x00000010 */ - -#define ADC_SQR1_SQ14_Pos (5U) -#define ADC_SQR1_SQ14_Msk (0x1FU << ADC_SQR1_SQ14_Pos) /*!< 0x000003E0 */ -#define ADC_SQR1_SQ14 ADC_SQR1_SQ14_Msk /*!< ADC group regular sequencer rank 14 */ -#define ADC_SQR1_SQ14_0 (0x01U << ADC_SQR1_SQ14_Pos) /*!< 0x00000020 */ -#define ADC_SQR1_SQ14_1 (0x02U << ADC_SQR1_SQ14_Pos) /*!< 0x00000040 */ -#define ADC_SQR1_SQ14_2 (0x04U << ADC_SQR1_SQ14_Pos) /*!< 0x00000080 */ -#define ADC_SQR1_SQ14_3 (0x08U << ADC_SQR1_SQ14_Pos) /*!< 0x00000100 */ -#define ADC_SQR1_SQ14_4 (0x10U << ADC_SQR1_SQ14_Pos) /*!< 0x00000200 */ - -#define ADC_SQR1_SQ15_Pos (10U) -#define ADC_SQR1_SQ15_Msk (0x1FU << ADC_SQR1_SQ15_Pos) /*!< 0x00007C00 */ -#define ADC_SQR1_SQ15 ADC_SQR1_SQ15_Msk /*!< ADC group regular sequencer rank 15 */ -#define ADC_SQR1_SQ15_0 (0x01U << ADC_SQR1_SQ15_Pos) /*!< 0x00000400 */ -#define ADC_SQR1_SQ15_1 (0x02U << ADC_SQR1_SQ15_Pos) /*!< 0x00000800 */ -#define ADC_SQR1_SQ15_2 (0x04U << ADC_SQR1_SQ15_Pos) /*!< 0x00001000 */ -#define ADC_SQR1_SQ15_3 (0x08U << ADC_SQR1_SQ15_Pos) /*!< 0x00002000 */ -#define ADC_SQR1_SQ15_4 (0x10U << ADC_SQR1_SQ15_Pos) /*!< 0x00004000 */ - -#define ADC_SQR1_SQ16_Pos (15U) -#define ADC_SQR1_SQ16_Msk (0x1FU << ADC_SQR1_SQ16_Pos) /*!< 0x000F8000 */ -#define ADC_SQR1_SQ16 ADC_SQR1_SQ16_Msk /*!< ADC group regular sequencer rank 16 */ -#define ADC_SQR1_SQ16_0 (0x01U << ADC_SQR1_SQ16_Pos) /*!< 0x00008000 */ -#define ADC_SQR1_SQ16_1 (0x02U << ADC_SQR1_SQ16_Pos) /*!< 0x00010000 */ -#define ADC_SQR1_SQ16_2 (0x04U << ADC_SQR1_SQ16_Pos) /*!< 0x00020000 */ -#define ADC_SQR1_SQ16_3 (0x08U << ADC_SQR1_SQ16_Pos) /*!< 0x00040000 */ -#define ADC_SQR1_SQ16_4 (0x10U << ADC_SQR1_SQ16_Pos) /*!< 0x00080000 */ - -#define ADC_SQR1_L_Pos (20U) -#define ADC_SQR1_L_Msk (0xFU << ADC_SQR1_L_Pos) /*!< 0x00F00000 */ -#define ADC_SQR1_L ADC_SQR1_L_Msk /*!< ADC group regular sequencer scan length */ -#define ADC_SQR1_L_0 (0x1U << ADC_SQR1_L_Pos) /*!< 0x00100000 */ -#define ADC_SQR1_L_1 (0x2U << ADC_SQR1_L_Pos) /*!< 0x00200000 */ -#define ADC_SQR1_L_2 (0x4U << ADC_SQR1_L_Pos) /*!< 0x00400000 */ -#define ADC_SQR1_L_3 (0x8U << ADC_SQR1_L_Pos) /*!< 0x00800000 */ - -/******************* Bit definition for ADC_SQR2 register *******************/ -#define ADC_SQR2_SQ7_Pos (0U) -#define ADC_SQR2_SQ7_Msk (0x1FU << ADC_SQR2_SQ7_Pos) /*!< 0x0000001F */ -#define ADC_SQR2_SQ7 ADC_SQR2_SQ7_Msk /*!< ADC group regular sequencer rank 7 */ -#define ADC_SQR2_SQ7_0 (0x01U << ADC_SQR2_SQ7_Pos) /*!< 0x00000001 */ -#define ADC_SQR2_SQ7_1 (0x02U << ADC_SQR2_SQ7_Pos) /*!< 0x00000002 */ -#define ADC_SQR2_SQ7_2 (0x04U << ADC_SQR2_SQ7_Pos) /*!< 0x00000004 */ -#define ADC_SQR2_SQ7_3 (0x08U << ADC_SQR2_SQ7_Pos) /*!< 0x00000008 */ -#define ADC_SQR2_SQ7_4 (0x10U << ADC_SQR2_SQ7_Pos) /*!< 0x00000010 */ - -#define ADC_SQR2_SQ8_Pos (5U) -#define ADC_SQR2_SQ8_Msk (0x1FU << ADC_SQR2_SQ8_Pos) /*!< 0x000003E0 */ -#define ADC_SQR2_SQ8 ADC_SQR2_SQ8_Msk /*!< ADC group regular sequencer rank 8 */ -#define ADC_SQR2_SQ8_0 (0x01U << ADC_SQR2_SQ8_Pos) /*!< 0x00000020 */ -#define ADC_SQR2_SQ8_1 (0x02U << ADC_SQR2_SQ8_Pos) /*!< 0x00000040 */ -#define ADC_SQR2_SQ8_2 (0x04U << ADC_SQR2_SQ8_Pos) /*!< 0x00000080 */ -#define ADC_SQR2_SQ8_3 (0x08U << ADC_SQR2_SQ8_Pos) /*!< 0x00000100 */ -#define ADC_SQR2_SQ8_4 (0x10U << ADC_SQR2_SQ8_Pos) /*!< 0x00000200 */ - -#define ADC_SQR2_SQ9_Pos (10U) -#define ADC_SQR2_SQ9_Msk (0x1FU << ADC_SQR2_SQ9_Pos) /*!< 0x00007C00 */ -#define ADC_SQR2_SQ9 ADC_SQR2_SQ9_Msk /*!< ADC group regular sequencer rank 9 */ -#define ADC_SQR2_SQ9_0 (0x01U << ADC_SQR2_SQ9_Pos) /*!< 0x00000400 */ -#define ADC_SQR2_SQ9_1 (0x02U << ADC_SQR2_SQ9_Pos) /*!< 0x00000800 */ -#define ADC_SQR2_SQ9_2 (0x04U << ADC_SQR2_SQ9_Pos) /*!< 0x00001000 */ -#define ADC_SQR2_SQ9_3 (0x08U << ADC_SQR2_SQ9_Pos) /*!< 0x00002000 */ -#define ADC_SQR2_SQ9_4 (0x10U << ADC_SQR2_SQ9_Pos) /*!< 0x00004000 */ - -#define ADC_SQR2_SQ10_Pos (15U) -#define ADC_SQR2_SQ10_Msk (0x1FU << ADC_SQR2_SQ10_Pos) /*!< 0x000F8000 */ -#define ADC_SQR2_SQ10 ADC_SQR2_SQ10_Msk /*!< ADC group regular sequencer rank 10 */ -#define ADC_SQR2_SQ10_0 (0x01U << ADC_SQR2_SQ10_Pos) /*!< 0x00008000 */ -#define ADC_SQR2_SQ10_1 (0x02U << ADC_SQR2_SQ10_Pos) /*!< 0x00010000 */ -#define ADC_SQR2_SQ10_2 (0x04U << ADC_SQR2_SQ10_Pos) /*!< 0x00020000 */ -#define ADC_SQR2_SQ10_3 (0x08U << ADC_SQR2_SQ10_Pos) /*!< 0x00040000 */ -#define ADC_SQR2_SQ10_4 (0x10U << ADC_SQR2_SQ10_Pos) /*!< 0x00080000 */ - -#define ADC_SQR2_SQ11_Pos (20U) -#define ADC_SQR2_SQ11_Msk (0x1FU << ADC_SQR2_SQ11_Pos) /*!< 0x01F00000 */ -#define ADC_SQR2_SQ11 ADC_SQR2_SQ11_Msk /*!< ADC group regular sequencer rank 1 */ -#define ADC_SQR2_SQ11_0 (0x01U << ADC_SQR2_SQ11_Pos) /*!< 0x00100000 */ -#define ADC_SQR2_SQ11_1 (0x02U << ADC_SQR2_SQ11_Pos) /*!< 0x00200000 */ -#define ADC_SQR2_SQ11_2 (0x04U << ADC_SQR2_SQ11_Pos) /*!< 0x00400000 */ -#define ADC_SQR2_SQ11_3 (0x08U << ADC_SQR2_SQ11_Pos) /*!< 0x00800000 */ -#define ADC_SQR2_SQ11_4 (0x10U << ADC_SQR2_SQ11_Pos) /*!< 0x01000000 */ - -#define ADC_SQR2_SQ12_Pos (25U) -#define ADC_SQR2_SQ12_Msk (0x1FU << ADC_SQR2_SQ12_Pos) /*!< 0x3E000000 */ -#define ADC_SQR2_SQ12 ADC_SQR2_SQ12_Msk /*!< ADC group regular sequencer rank 12 */ -#define ADC_SQR2_SQ12_0 (0x01U << ADC_SQR2_SQ12_Pos) /*!< 0x02000000 */ -#define ADC_SQR2_SQ12_1 (0x02U << ADC_SQR2_SQ12_Pos) /*!< 0x04000000 */ -#define ADC_SQR2_SQ12_2 (0x04U << ADC_SQR2_SQ12_Pos) /*!< 0x08000000 */ -#define ADC_SQR2_SQ12_3 (0x08U << ADC_SQR2_SQ12_Pos) /*!< 0x10000000 */ -#define ADC_SQR2_SQ12_4 (0x10U << ADC_SQR2_SQ12_Pos) /*!< 0x20000000 */ - -/******************* Bit definition for ADC_SQR3 register *******************/ -#define ADC_SQR3_SQ1_Pos (0U) -#define ADC_SQR3_SQ1_Msk (0x1FU << ADC_SQR3_SQ1_Pos) /*!< 0x0000001F */ -#define ADC_SQR3_SQ1 ADC_SQR3_SQ1_Msk /*!< ADC group regular sequencer rank 1 */ -#define ADC_SQR3_SQ1_0 (0x01U << ADC_SQR3_SQ1_Pos) /*!< 0x00000001 */ -#define ADC_SQR3_SQ1_1 (0x02U << ADC_SQR3_SQ1_Pos) /*!< 0x00000002 */ -#define ADC_SQR3_SQ1_2 (0x04U << ADC_SQR3_SQ1_Pos) /*!< 0x00000004 */ -#define ADC_SQR3_SQ1_3 (0x08U << ADC_SQR3_SQ1_Pos) /*!< 0x00000008 */ -#define ADC_SQR3_SQ1_4 (0x10U << ADC_SQR3_SQ1_Pos) /*!< 0x00000010 */ - -#define ADC_SQR3_SQ2_Pos (5U) -#define ADC_SQR3_SQ2_Msk (0x1FU << ADC_SQR3_SQ2_Pos) /*!< 0x000003E0 */ -#define ADC_SQR3_SQ2 ADC_SQR3_SQ2_Msk /*!< ADC group regular sequencer rank 2 */ -#define ADC_SQR3_SQ2_0 (0x01U << ADC_SQR3_SQ2_Pos) /*!< 0x00000020 */ -#define ADC_SQR3_SQ2_1 (0x02U << ADC_SQR3_SQ2_Pos) /*!< 0x00000040 */ -#define ADC_SQR3_SQ2_2 (0x04U << ADC_SQR3_SQ2_Pos) /*!< 0x00000080 */ -#define ADC_SQR3_SQ2_3 (0x08U << ADC_SQR3_SQ2_Pos) /*!< 0x00000100 */ -#define ADC_SQR3_SQ2_4 (0x10U << ADC_SQR3_SQ2_Pos) /*!< 0x00000200 */ - -#define ADC_SQR3_SQ3_Pos (10U) -#define ADC_SQR3_SQ3_Msk (0x1FU << ADC_SQR3_SQ3_Pos) /*!< 0x00007C00 */ -#define ADC_SQR3_SQ3 ADC_SQR3_SQ3_Msk /*!< ADC group regular sequencer rank 3 */ -#define ADC_SQR3_SQ3_0 (0x01U << ADC_SQR3_SQ3_Pos) /*!< 0x00000400 */ -#define ADC_SQR3_SQ3_1 (0x02U << ADC_SQR3_SQ3_Pos) /*!< 0x00000800 */ -#define ADC_SQR3_SQ3_2 (0x04U << ADC_SQR3_SQ3_Pos) /*!< 0x00001000 */ -#define ADC_SQR3_SQ3_3 (0x08U << ADC_SQR3_SQ3_Pos) /*!< 0x00002000 */ -#define ADC_SQR3_SQ3_4 (0x10U << ADC_SQR3_SQ3_Pos) /*!< 0x00004000 */ - -#define ADC_SQR3_SQ4_Pos (15U) -#define ADC_SQR3_SQ4_Msk (0x1FU << ADC_SQR3_SQ4_Pos) /*!< 0x000F8000 */ -#define ADC_SQR3_SQ4 ADC_SQR3_SQ4_Msk /*!< ADC group regular sequencer rank 4 */ -#define ADC_SQR3_SQ4_0 (0x01U << ADC_SQR3_SQ4_Pos) /*!< 0x00008000 */ -#define ADC_SQR3_SQ4_1 (0x02U << ADC_SQR3_SQ4_Pos) /*!< 0x00010000 */ -#define ADC_SQR3_SQ4_2 (0x04U << ADC_SQR3_SQ4_Pos) /*!< 0x00020000 */ -#define ADC_SQR3_SQ4_3 (0x08U << ADC_SQR3_SQ4_Pos) /*!< 0x00040000 */ -#define ADC_SQR3_SQ4_4 (0x10U << ADC_SQR3_SQ4_Pos) /*!< 0x00080000 */ - -#define ADC_SQR3_SQ5_Pos (20U) -#define ADC_SQR3_SQ5_Msk (0x1FU << ADC_SQR3_SQ5_Pos) /*!< 0x01F00000 */ -#define ADC_SQR3_SQ5 ADC_SQR3_SQ5_Msk /*!< ADC group regular sequencer rank 5 */ -#define ADC_SQR3_SQ5_0 (0x01U << ADC_SQR3_SQ5_Pos) /*!< 0x00100000 */ -#define ADC_SQR3_SQ5_1 (0x02U << ADC_SQR3_SQ5_Pos) /*!< 0x00200000 */ -#define ADC_SQR3_SQ5_2 (0x04U << ADC_SQR3_SQ5_Pos) /*!< 0x00400000 */ -#define ADC_SQR3_SQ5_3 (0x08U << ADC_SQR3_SQ5_Pos) /*!< 0x00800000 */ -#define ADC_SQR3_SQ5_4 (0x10U << ADC_SQR3_SQ5_Pos) /*!< 0x01000000 */ - -#define ADC_SQR3_SQ6_Pos (25U) -#define ADC_SQR3_SQ6_Msk (0x1FU << ADC_SQR3_SQ6_Pos) /*!< 0x3E000000 */ -#define ADC_SQR3_SQ6 ADC_SQR3_SQ6_Msk /*!< ADC group regular sequencer rank 6 */ -#define ADC_SQR3_SQ6_0 (0x01U << ADC_SQR3_SQ6_Pos) /*!< 0x02000000 */ -#define ADC_SQR3_SQ6_1 (0x02U << ADC_SQR3_SQ6_Pos) /*!< 0x04000000 */ -#define ADC_SQR3_SQ6_2 (0x04U << ADC_SQR3_SQ6_Pos) /*!< 0x08000000 */ -#define ADC_SQR3_SQ6_3 (0x08U << ADC_SQR3_SQ6_Pos) /*!< 0x10000000 */ -#define ADC_SQR3_SQ6_4 (0x10U << ADC_SQR3_SQ6_Pos) /*!< 0x20000000 */ - -/******************* Bit definition for ADC_JSQR register *******************/ -#define ADC_JSQR_JSQ1_Pos (0U) -#define ADC_JSQR_JSQ1_Msk (0x1FU << ADC_JSQR_JSQ1_Pos) /*!< 0x0000001F */ -#define ADC_JSQR_JSQ1 ADC_JSQR_JSQ1_Msk /*!< ADC group injected sequencer rank 1 */ -#define ADC_JSQR_JSQ1_0 (0x01U << ADC_JSQR_JSQ1_Pos) /*!< 0x00000001 */ -#define ADC_JSQR_JSQ1_1 (0x02U << ADC_JSQR_JSQ1_Pos) /*!< 0x00000002 */ -#define ADC_JSQR_JSQ1_2 (0x04U << ADC_JSQR_JSQ1_Pos) /*!< 0x00000004 */ -#define ADC_JSQR_JSQ1_3 (0x08U << ADC_JSQR_JSQ1_Pos) /*!< 0x00000008 */ -#define ADC_JSQR_JSQ1_4 (0x10U << ADC_JSQR_JSQ1_Pos) /*!< 0x00000010 */ - -#define ADC_JSQR_JSQ2_Pos (5U) -#define ADC_JSQR_JSQ2_Msk (0x1FU << ADC_JSQR_JSQ2_Pos) /*!< 0x000003E0 */ -#define ADC_JSQR_JSQ2 ADC_JSQR_JSQ2_Msk /*!< ADC group injected sequencer rank 2 */ -#define ADC_JSQR_JSQ2_0 (0x01U << ADC_JSQR_JSQ2_Pos) /*!< 0x00000020 */ -#define ADC_JSQR_JSQ2_1 (0x02U << ADC_JSQR_JSQ2_Pos) /*!< 0x00000040 */ -#define ADC_JSQR_JSQ2_2 (0x04U << ADC_JSQR_JSQ2_Pos) /*!< 0x00000080 */ -#define ADC_JSQR_JSQ2_3 (0x08U << ADC_JSQR_JSQ2_Pos) /*!< 0x00000100 */ -#define ADC_JSQR_JSQ2_4 (0x10U << ADC_JSQR_JSQ2_Pos) /*!< 0x00000200 */ - -#define ADC_JSQR_JSQ3_Pos (10U) -#define ADC_JSQR_JSQ3_Msk (0x1FU << ADC_JSQR_JSQ3_Pos) /*!< 0x00007C00 */ -#define ADC_JSQR_JSQ3 ADC_JSQR_JSQ3_Msk /*!< ADC group injected sequencer rank 3 */ -#define ADC_JSQR_JSQ3_0 (0x01U << ADC_JSQR_JSQ3_Pos) /*!< 0x00000400 */ -#define ADC_JSQR_JSQ3_1 (0x02U << ADC_JSQR_JSQ3_Pos) /*!< 0x00000800 */ -#define ADC_JSQR_JSQ3_2 (0x04U << ADC_JSQR_JSQ3_Pos) /*!< 0x00001000 */ -#define ADC_JSQR_JSQ3_3 (0x08U << ADC_JSQR_JSQ3_Pos) /*!< 0x00002000 */ -#define ADC_JSQR_JSQ3_4 (0x10U << ADC_JSQR_JSQ3_Pos) /*!< 0x00004000 */ - -#define ADC_JSQR_JSQ4_Pos (15U) -#define ADC_JSQR_JSQ4_Msk (0x1FU << ADC_JSQR_JSQ4_Pos) /*!< 0x000F8000 */ -#define ADC_JSQR_JSQ4 ADC_JSQR_JSQ4_Msk /*!< ADC group injected sequencer rank 4 */ -#define ADC_JSQR_JSQ4_0 (0x01U << ADC_JSQR_JSQ4_Pos) /*!< 0x00008000 */ -#define ADC_JSQR_JSQ4_1 (0x02U << ADC_JSQR_JSQ4_Pos) /*!< 0x00010000 */ -#define ADC_JSQR_JSQ4_2 (0x04U << ADC_JSQR_JSQ4_Pos) /*!< 0x00020000 */ -#define ADC_JSQR_JSQ4_3 (0x08U << ADC_JSQR_JSQ4_Pos) /*!< 0x00040000 */ -#define ADC_JSQR_JSQ4_4 (0x10U << ADC_JSQR_JSQ4_Pos) /*!< 0x00080000 */ - -#define ADC_JSQR_JL_Pos (20U) -#define ADC_JSQR_JL_Msk (0x3U << ADC_JSQR_JL_Pos) /*!< 0x00300000 */ -#define ADC_JSQR_JL ADC_JSQR_JL_Msk /*!< ADC group injected sequencer scan length */ -#define ADC_JSQR_JL_0 (0x1U << ADC_JSQR_JL_Pos) /*!< 0x00100000 */ -#define ADC_JSQR_JL_1 (0x2U << ADC_JSQR_JL_Pos) /*!< 0x00200000 */ - -/******************* Bit definition for ADC_JDR1 register *******************/ -#define ADC_JDR1_JDATA_Pos (0U) -#define ADC_JDR1_JDATA_Msk (0xFFFFU << ADC_JDR1_JDATA_Pos) /*!< 0x0000FFFF */ -#define ADC_JDR1_JDATA ADC_JDR1_JDATA_Msk /*!< ADC group injected sequencer rank 1 conversion data */ - -/******************* Bit definition for ADC_JDR2 register *******************/ -#define ADC_JDR2_JDATA_Pos (0U) -#define ADC_JDR2_JDATA_Msk (0xFFFFU << ADC_JDR2_JDATA_Pos) /*!< 0x0000FFFF */ -#define ADC_JDR2_JDATA ADC_JDR2_JDATA_Msk /*!< ADC group injected sequencer rank 2 conversion data */ - -/******************* Bit definition for ADC_JDR3 register *******************/ -#define ADC_JDR3_JDATA_Pos (0U) -#define ADC_JDR3_JDATA_Msk (0xFFFFU << ADC_JDR3_JDATA_Pos) /*!< 0x0000FFFF */ -#define ADC_JDR3_JDATA ADC_JDR3_JDATA_Msk /*!< ADC group injected sequencer rank 3 conversion data */ - -/******************* Bit definition for ADC_JDR4 register *******************/ -#define ADC_JDR4_JDATA_Pos (0U) -#define ADC_JDR4_JDATA_Msk (0xFFFFU << ADC_JDR4_JDATA_Pos) /*!< 0x0000FFFF */ -#define ADC_JDR4_JDATA ADC_JDR4_JDATA_Msk /*!< ADC group injected sequencer rank 4 conversion data */ - -/******************** Bit definition for ADC_DR register ********************/ -#define ADC_DR_DATA_Pos (0U) -#define ADC_DR_DATA_Msk (0xFFFFU << ADC_DR_DATA_Pos) /*!< 0x0000FFFF */ -#define ADC_DR_DATA ADC_DR_DATA_Msk /*!< ADC group regular conversion data */ -#define ADC_DR_ADC2DATA_Pos (16U) -#define ADC_DR_ADC2DATA_Msk (0xFFFFU << ADC_DR_ADC2DATA_Pos) /*!< 0xFFFF0000 */ -#define ADC_DR_ADC2DATA ADC_DR_ADC2DATA_Msk /*!< ADC group regular conversion data for ADC slave, in multimode */ - - -/*****************************************************************************/ -/* */ -/* Timers (TIM) */ -/* */ -/*****************************************************************************/ -/******************* Bit definition for TIM_CR1 register *******************/ -#define TIM_CR1_CEN_Pos (0U) -#define TIM_CR1_CEN_Msk (0x1U << TIM_CR1_CEN_Pos) /*!< 0x00000001 */ -#define TIM_CR1_CEN TIM_CR1_CEN_Msk /*!<Counter enable */ -#define TIM_CR1_UDIS_Pos (1U) -#define TIM_CR1_UDIS_Msk (0x1U << TIM_CR1_UDIS_Pos) /*!< 0x00000002 */ -#define TIM_CR1_UDIS TIM_CR1_UDIS_Msk /*!<Update disable */ -#define TIM_CR1_URS_Pos (2U) -#define TIM_CR1_URS_Msk (0x1U << TIM_CR1_URS_Pos) /*!< 0x00000004 */ -#define TIM_CR1_URS TIM_CR1_URS_Msk /*!<Update request source */ -#define TIM_CR1_OPM_Pos (3U) -#define TIM_CR1_OPM_Msk (0x1U << TIM_CR1_OPM_Pos) /*!< 0x00000008 */ -#define TIM_CR1_OPM TIM_CR1_OPM_Msk /*!<One pulse mode */ -#define TIM_CR1_DIR_Pos (4U) -#define TIM_CR1_DIR_Msk (0x1U << TIM_CR1_DIR_Pos) /*!< 0x00000010 */ -#define TIM_CR1_DIR TIM_CR1_DIR_Msk /*!<Direction */ - -#define TIM_CR1_CMS_Pos (5U) -#define TIM_CR1_CMS_Msk (0x3U << TIM_CR1_CMS_Pos) /*!< 0x00000060 */ -#define TIM_CR1_CMS TIM_CR1_CMS_Msk /*!<CMS[1:0] bits (Center-aligned mode selection) */ -#define TIM_CR1_CMS_0 (0x1U << TIM_CR1_CMS_Pos) /*!< 0x00000020 */ -#define TIM_CR1_CMS_1 (0x2U << TIM_CR1_CMS_Pos) /*!< 0x00000040 */ - -#define TIM_CR1_ARPE_Pos (7U) -#define TIM_CR1_ARPE_Msk (0x1U << TIM_CR1_ARPE_Pos) /*!< 0x00000080 */ -#define TIM_CR1_ARPE TIM_CR1_ARPE_Msk /*!<Auto-reload preload enable */ - -#define TIM_CR1_CKD_Pos (8U) -#define TIM_CR1_CKD_Msk (0x3U << TIM_CR1_CKD_Pos) /*!< 0x00000300 */ -#define TIM_CR1_CKD TIM_CR1_CKD_Msk /*!<CKD[1:0] bits (clock division) */ -#define TIM_CR1_CKD_0 (0x1U << TIM_CR1_CKD_Pos) /*!< 0x00000100 */ -#define TIM_CR1_CKD_1 (0x2U << TIM_CR1_CKD_Pos) /*!< 0x00000200 */ - -/******************* Bit definition for TIM_CR2 register *******************/ -#define TIM_CR2_CCPC_Pos (0U) -#define TIM_CR2_CCPC_Msk (0x1U << TIM_CR2_CCPC_Pos) /*!< 0x00000001 */ -#define TIM_CR2_CCPC TIM_CR2_CCPC_Msk /*!<Capture/Compare Preloaded Control */ -#define TIM_CR2_CCUS_Pos (2U) -#define TIM_CR2_CCUS_Msk (0x1U << TIM_CR2_CCUS_Pos) /*!< 0x00000004 */ -#define TIM_CR2_CCUS TIM_CR2_CCUS_Msk /*!<Capture/Compare Control Update Selection */ -#define TIM_CR2_CCDS_Pos (3U) -#define TIM_CR2_CCDS_Msk (0x1U << TIM_CR2_CCDS_Pos) /*!< 0x00000008 */ -#define TIM_CR2_CCDS TIM_CR2_CCDS_Msk /*!<Capture/Compare DMA Selection */ - -#define TIM_CR2_MMS_Pos (4U) -#define TIM_CR2_MMS_Msk (0x7U << TIM_CR2_MMS_Pos) /*!< 0x00000070 */ -#define TIM_CR2_MMS TIM_CR2_MMS_Msk /*!<MMS[2:0] bits (Master Mode Selection) */ -#define TIM_CR2_MMS_0 (0x1U << TIM_CR2_MMS_Pos) /*!< 0x00000010 */ -#define TIM_CR2_MMS_1 (0x2U << TIM_CR2_MMS_Pos) /*!< 0x00000020 */ -#define TIM_CR2_MMS_2 (0x4U << TIM_CR2_MMS_Pos) /*!< 0x00000040 */ - -#define TIM_CR2_TI1S_Pos (7U) -#define TIM_CR2_TI1S_Msk (0x1U << TIM_CR2_TI1S_Pos) /*!< 0x00000080 */ -#define TIM_CR2_TI1S TIM_CR2_TI1S_Msk /*!<TI1 Selection */ -#define TIM_CR2_OIS1_Pos (8U) -#define TIM_CR2_OIS1_Msk (0x1U << TIM_CR2_OIS1_Pos) /*!< 0x00000100 */ -#define TIM_CR2_OIS1 TIM_CR2_OIS1_Msk /*!<Output Idle state 1 (OC1 output) */ -#define TIM_CR2_OIS1N_Pos (9U) -#define TIM_CR2_OIS1N_Msk (0x1U << TIM_CR2_OIS1N_Pos) /*!< 0x00000200 */ -#define TIM_CR2_OIS1N TIM_CR2_OIS1N_Msk /*!<Output Idle state 1 (OC1N output) */ -#define TIM_CR2_OIS2_Pos (10U) -#define TIM_CR2_OIS2_Msk (0x1U << TIM_CR2_OIS2_Pos) /*!< 0x00000400 */ -#define TIM_CR2_OIS2 TIM_CR2_OIS2_Msk /*!<Output Idle state 2 (OC2 output) */ -#define TIM_CR2_OIS2N_Pos (11U) -#define TIM_CR2_OIS2N_Msk (0x1U << TIM_CR2_OIS2N_Pos) /*!< 0x00000800 */ -#define TIM_CR2_OIS2N TIM_CR2_OIS2N_Msk /*!<Output Idle state 2 (OC2N output) */ -#define TIM_CR2_OIS3_Pos (12U) -#define TIM_CR2_OIS3_Msk (0x1U << TIM_CR2_OIS3_Pos) /*!< 0x00001000 */ -#define TIM_CR2_OIS3 TIM_CR2_OIS3_Msk /*!<Output Idle state 3 (OC3 output) */ -#define TIM_CR2_OIS3N_Pos (13U) -#define TIM_CR2_OIS3N_Msk (0x1U << TIM_CR2_OIS3N_Pos) /*!< 0x00002000 */ -#define TIM_CR2_OIS3N TIM_CR2_OIS3N_Msk /*!<Output Idle state 3 (OC3N output) */ -#define TIM_CR2_OIS4_Pos (14U) -#define TIM_CR2_OIS4_Msk (0x1U << TIM_CR2_OIS4_Pos) /*!< 0x00004000 */ -#define TIM_CR2_OIS4 TIM_CR2_OIS4_Msk /*!<Output Idle state 4 (OC4 output) */ - -/******************* Bit definition for TIM_SMCR register ******************/ -#define TIM_SMCR_SMS_Pos (0U) -#define TIM_SMCR_SMS_Msk (0x7U << TIM_SMCR_SMS_Pos) /*!< 0x00000007 */ -#define TIM_SMCR_SMS TIM_SMCR_SMS_Msk /*!<SMS[2:0] bits (Slave mode selection) */ -#define TIM_SMCR_SMS_0 (0x1U << TIM_SMCR_SMS_Pos) /*!< 0x00000001 */ -#define TIM_SMCR_SMS_1 (0x2U << TIM_SMCR_SMS_Pos) /*!< 0x00000002 */ -#define TIM_SMCR_SMS_2 (0x4U << TIM_SMCR_SMS_Pos) /*!< 0x00000004 */ - -#define TIM_SMCR_OCCS_Pos (3U) -#define TIM_SMCR_OCCS_Msk (0x1U << TIM_SMCR_OCCS_Pos) /*!< 0x00000008 */ -#define TIM_SMCR_OCCS TIM_SMCR_OCCS_Msk /*!< OCREF clear selection */ - -#define TIM_SMCR_TS_Pos (4U) -#define TIM_SMCR_TS_Msk (0x7U << TIM_SMCR_TS_Pos) /*!< 0x00000070 */ -#define TIM_SMCR_TS TIM_SMCR_TS_Msk /*!<TS[2:0] bits (Trigger selection) */ -#define TIM_SMCR_TS_0 (0x1U << TIM_SMCR_TS_Pos) /*!< 0x00000010 */ -#define TIM_SMCR_TS_1 (0x2U << TIM_SMCR_TS_Pos) /*!< 0x00000020 */ -#define TIM_SMCR_TS_2 (0x4U << TIM_SMCR_TS_Pos) /*!< 0x00000040 */ - -#define TIM_SMCR_MSM_Pos (7U) -#define TIM_SMCR_MSM_Msk (0x1U << TIM_SMCR_MSM_Pos) /*!< 0x00000080 */ -#define TIM_SMCR_MSM TIM_SMCR_MSM_Msk /*!<Master/slave mode */ - -#define TIM_SMCR_ETF_Pos (8U) -#define TIM_SMCR_ETF_Msk (0xFU << TIM_SMCR_ETF_Pos) /*!< 0x00000F00 */ -#define TIM_SMCR_ETF TIM_SMCR_ETF_Msk /*!<ETF[3:0] bits (External trigger filter) */ -#define TIM_SMCR_ETF_0 (0x1U << TIM_SMCR_ETF_Pos) /*!< 0x00000100 */ -#define TIM_SMCR_ETF_1 (0x2U << TIM_SMCR_ETF_Pos) /*!< 0x00000200 */ -#define TIM_SMCR_ETF_2 (0x4U << TIM_SMCR_ETF_Pos) /*!< 0x00000400 */ -#define TIM_SMCR_ETF_3 (0x8U << TIM_SMCR_ETF_Pos) /*!< 0x00000800 */ - -#define TIM_SMCR_ETPS_Pos (12U) -#define TIM_SMCR_ETPS_Msk (0x3U << TIM_SMCR_ETPS_Pos) /*!< 0x00003000 */ -#define TIM_SMCR_ETPS TIM_SMCR_ETPS_Msk /*!<ETPS[1:0] bits (External trigger prescaler) */ -#define TIM_SMCR_ETPS_0 (0x1U << TIM_SMCR_ETPS_Pos) /*!< 0x00001000 */ -#define TIM_SMCR_ETPS_1 (0x2U << TIM_SMCR_ETPS_Pos) /*!< 0x00002000 */ - -#define TIM_SMCR_ECE_Pos (14U) -#define TIM_SMCR_ECE_Msk (0x1U << TIM_SMCR_ECE_Pos) /*!< 0x00004000 */ -#define TIM_SMCR_ECE TIM_SMCR_ECE_Msk /*!<External clock enable */ -#define TIM_SMCR_ETP_Pos (15U) -#define TIM_SMCR_ETP_Msk (0x1U << TIM_SMCR_ETP_Pos) /*!< 0x00008000 */ -#define TIM_SMCR_ETP TIM_SMCR_ETP_Msk /*!<External trigger polarity */ - -/******************* Bit definition for TIM_DIER register ******************/ -#define TIM_DIER_UIE_Pos (0U) -#define TIM_DIER_UIE_Msk (0x1U << TIM_DIER_UIE_Pos) /*!< 0x00000001 */ -#define TIM_DIER_UIE TIM_DIER_UIE_Msk /*!<Update interrupt enable */ -#define TIM_DIER_CC1IE_Pos (1U) -#define TIM_DIER_CC1IE_Msk (0x1U << TIM_DIER_CC1IE_Pos) /*!< 0x00000002 */ -#define TIM_DIER_CC1IE TIM_DIER_CC1IE_Msk /*!<Capture/Compare 1 interrupt enable */ -#define TIM_DIER_CC2IE_Pos (2U) -#define TIM_DIER_CC2IE_Msk (0x1U << TIM_DIER_CC2IE_Pos) /*!< 0x00000004 */ -#define TIM_DIER_CC2IE TIM_DIER_CC2IE_Msk /*!<Capture/Compare 2 interrupt enable */ -#define TIM_DIER_CC3IE_Pos (3U) -#define TIM_DIER_CC3IE_Msk (0x1U << TIM_DIER_CC3IE_Pos) /*!< 0x00000008 */ -#define TIM_DIER_CC3IE TIM_DIER_CC3IE_Msk /*!<Capture/Compare 3 interrupt enable */ -#define TIM_DIER_CC4IE_Pos (4U) -#define TIM_DIER_CC4IE_Msk (0x1U << TIM_DIER_CC4IE_Pos) /*!< 0x00000010 */ -#define TIM_DIER_CC4IE TIM_DIER_CC4IE_Msk /*!<Capture/Compare 4 interrupt enable */ -#define TIM_DIER_COMIE_Pos (5U) -#define TIM_DIER_COMIE_Msk (0x1U << TIM_DIER_COMIE_Pos) /*!< 0x00000020 */ -#define TIM_DIER_COMIE TIM_DIER_COMIE_Msk /*!<COM interrupt enable */ -#define TIM_DIER_TIE_Pos (6U) -#define TIM_DIER_TIE_Msk (0x1U << TIM_DIER_TIE_Pos) /*!< 0x00000040 */ -#define TIM_DIER_TIE TIM_DIER_TIE_Msk /*!<Trigger interrupt enable */ -#define TIM_DIER_BIE_Pos (7U) -#define TIM_DIER_BIE_Msk (0x1U << TIM_DIER_BIE_Pos) /*!< 0x00000080 */ -#define TIM_DIER_BIE TIM_DIER_BIE_Msk /*!<Break interrupt enable */ -#define TIM_DIER_UDE_Pos (8U) -#define TIM_DIER_UDE_Msk (0x1U << TIM_DIER_UDE_Pos) /*!< 0x00000100 */ -#define TIM_DIER_UDE TIM_DIER_UDE_Msk /*!<Update DMA request enable */ -#define TIM_DIER_CC1DE_Pos (9U) -#define TIM_DIER_CC1DE_Msk (0x1U << TIM_DIER_CC1DE_Pos) /*!< 0x00000200 */ -#define TIM_DIER_CC1DE TIM_DIER_CC1DE_Msk /*!<Capture/Compare 1 DMA request enable */ -#define TIM_DIER_CC2DE_Pos (10U) -#define TIM_DIER_CC2DE_Msk (0x1U << TIM_DIER_CC2DE_Pos) /*!< 0x00000400 */ -#define TIM_DIER_CC2DE TIM_DIER_CC2DE_Msk /*!<Capture/Compare 2 DMA request enable */ -#define TIM_DIER_CC3DE_Pos (11U) -#define TIM_DIER_CC3DE_Msk (0x1U << TIM_DIER_CC3DE_Pos) /*!< 0x00000800 */ -#define TIM_DIER_CC3DE TIM_DIER_CC3DE_Msk /*!<Capture/Compare 3 DMA request enable */ -#define TIM_DIER_CC4DE_Pos (12U) -#define TIM_DIER_CC4DE_Msk (0x1U << TIM_DIER_CC4DE_Pos) /*!< 0x00001000 */ -#define TIM_DIER_CC4DE TIM_DIER_CC4DE_Msk /*!<Capture/Compare 4 DMA request enable */ -#define TIM_DIER_COMDE_Pos (13U) -#define TIM_DIER_COMDE_Msk (0x1U << TIM_DIER_COMDE_Pos) /*!< 0x00002000 */ -#define TIM_DIER_COMDE TIM_DIER_COMDE_Msk /*!<COM DMA request enable */ -#define TIM_DIER_TDE_Pos (14U) -#define TIM_DIER_TDE_Msk (0x1U << TIM_DIER_TDE_Pos) /*!< 0x00004000 */ -#define TIM_DIER_TDE TIM_DIER_TDE_Msk /*!<Trigger DMA request enable */ - -/******************** Bit definition for TIM_SR register *******************/ -#define TIM_SR_UIF_Pos (0U) -#define TIM_SR_UIF_Msk (0x1U << TIM_SR_UIF_Pos) /*!< 0x00000001 */ -#define TIM_SR_UIF TIM_SR_UIF_Msk /*!<Update interrupt Flag */ -#define TIM_SR_CC1IF_Pos (1U) -#define TIM_SR_CC1IF_Msk (0x1U << TIM_SR_CC1IF_Pos) /*!< 0x00000002 */ -#define TIM_SR_CC1IF TIM_SR_CC1IF_Msk /*!<Capture/Compare 1 interrupt Flag */ -#define TIM_SR_CC2IF_Pos (2U) -#define TIM_SR_CC2IF_Msk (0x1U << TIM_SR_CC2IF_Pos) /*!< 0x00000004 */ -#define TIM_SR_CC2IF TIM_SR_CC2IF_Msk /*!<Capture/Compare 2 interrupt Flag */ -#define TIM_SR_CC3IF_Pos (3U) -#define TIM_SR_CC3IF_Msk (0x1U << TIM_SR_CC3IF_Pos) /*!< 0x00000008 */ -#define TIM_SR_CC3IF TIM_SR_CC3IF_Msk /*!<Capture/Compare 3 interrupt Flag */ -#define TIM_SR_CC4IF_Pos (4U) -#define TIM_SR_CC4IF_Msk (0x1U << TIM_SR_CC4IF_Pos) /*!< 0x00000010 */ -#define TIM_SR_CC4IF TIM_SR_CC4IF_Msk /*!<Capture/Compare 4 interrupt Flag */ -#define TIM_SR_COMIF_Pos (5U) -#define TIM_SR_COMIF_Msk (0x1U << TIM_SR_COMIF_Pos) /*!< 0x00000020 */ -#define TIM_SR_COMIF TIM_SR_COMIF_Msk /*!<COM interrupt Flag */ -#define TIM_SR_TIF_Pos (6U) -#define TIM_SR_TIF_Msk (0x1U << TIM_SR_TIF_Pos) /*!< 0x00000040 */ -#define TIM_SR_TIF TIM_SR_TIF_Msk /*!<Trigger interrupt Flag */ -#define TIM_SR_BIF_Pos (7U) -#define TIM_SR_BIF_Msk (0x1U << TIM_SR_BIF_Pos) /*!< 0x00000080 */ -#define TIM_SR_BIF TIM_SR_BIF_Msk /*!<Break interrupt Flag */ -#define TIM_SR_CC1OF_Pos (9U) -#define TIM_SR_CC1OF_Msk (0x1U << TIM_SR_CC1OF_Pos) /*!< 0x00000200 */ -#define TIM_SR_CC1OF TIM_SR_CC1OF_Msk /*!<Capture/Compare 1 Overcapture Flag */ -#define TIM_SR_CC2OF_Pos (10U) -#define TIM_SR_CC2OF_Msk (0x1U << TIM_SR_CC2OF_Pos) /*!< 0x00000400 */ -#define TIM_SR_CC2OF TIM_SR_CC2OF_Msk /*!<Capture/Compare 2 Overcapture Flag */ -#define TIM_SR_CC3OF_Pos (11U) -#define TIM_SR_CC3OF_Msk (0x1U << TIM_SR_CC3OF_Pos) /*!< 0x00000800 */ -#define TIM_SR_CC3OF TIM_SR_CC3OF_Msk /*!<Capture/Compare 3 Overcapture Flag */ -#define TIM_SR_CC4OF_Pos (12U) -#define TIM_SR_CC4OF_Msk (0x1U << TIM_SR_CC4OF_Pos) /*!< 0x00001000 */ -#define TIM_SR_CC4OF TIM_SR_CC4OF_Msk /*!<Capture/Compare 4 Overcapture Flag */ - -/******************* Bit definition for TIM_EGR register *******************/ -#define TIM_EGR_UG_Pos (0U) -#define TIM_EGR_UG_Msk (0x1U << TIM_EGR_UG_Pos) /*!< 0x00000001 */ -#define TIM_EGR_UG TIM_EGR_UG_Msk /*!<Update Generation */ -#define TIM_EGR_CC1G_Pos (1U) -#define TIM_EGR_CC1G_Msk (0x1U << TIM_EGR_CC1G_Pos) /*!< 0x00000002 */ -#define TIM_EGR_CC1G TIM_EGR_CC1G_Msk /*!<Capture/Compare 1 Generation */ -#define TIM_EGR_CC2G_Pos (2U) -#define TIM_EGR_CC2G_Msk (0x1U << TIM_EGR_CC2G_Pos) /*!< 0x00000004 */ -#define TIM_EGR_CC2G TIM_EGR_CC2G_Msk /*!<Capture/Compare 2 Generation */ -#define TIM_EGR_CC3G_Pos (3U) -#define TIM_EGR_CC3G_Msk (0x1U << TIM_EGR_CC3G_Pos) /*!< 0x00000008 */ -#define TIM_EGR_CC3G TIM_EGR_CC3G_Msk /*!<Capture/Compare 3 Generation */ -#define TIM_EGR_CC4G_Pos (4U) -#define TIM_EGR_CC4G_Msk (0x1U << TIM_EGR_CC4G_Pos) /*!< 0x00000010 */ -#define TIM_EGR_CC4G TIM_EGR_CC4G_Msk /*!<Capture/Compare 4 Generation */ -#define TIM_EGR_COMG_Pos (5U) -#define TIM_EGR_COMG_Msk (0x1U << TIM_EGR_COMG_Pos) /*!< 0x00000020 */ -#define TIM_EGR_COMG TIM_EGR_COMG_Msk /*!<Capture/Compare Control Update Generation */ -#define TIM_EGR_TG_Pos (6U) -#define TIM_EGR_TG_Msk (0x1U << TIM_EGR_TG_Pos) /*!< 0x00000040 */ -#define TIM_EGR_TG TIM_EGR_TG_Msk /*!<Trigger Generation */ -#define TIM_EGR_BG_Pos (7U) -#define TIM_EGR_BG_Msk (0x1U << TIM_EGR_BG_Pos) /*!< 0x00000080 */ -#define TIM_EGR_BG TIM_EGR_BG_Msk /*!<Break Generation */ - -/****************** Bit definition for TIM_CCMR1 register ******************/ -#define TIM_CCMR1_CC1S_Pos (0U) -#define TIM_CCMR1_CC1S_Msk (0x3U << TIM_CCMR1_CC1S_Pos) /*!< 0x00000003 */ -#define TIM_CCMR1_CC1S TIM_CCMR1_CC1S_Msk /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */ -#define TIM_CCMR1_CC1S_0 (0x1U << TIM_CCMR1_CC1S_Pos) /*!< 0x00000001 */ -#define TIM_CCMR1_CC1S_1 (0x2U << TIM_CCMR1_CC1S_Pos) /*!< 0x00000002 */ - -#define TIM_CCMR1_OC1FE_Pos (2U) -#define TIM_CCMR1_OC1FE_Msk (0x1U << TIM_CCMR1_OC1FE_Pos) /*!< 0x00000004 */ -#define TIM_CCMR1_OC1FE TIM_CCMR1_OC1FE_Msk /*!<Output Compare 1 Fast enable */ -#define TIM_CCMR1_OC1PE_Pos (3U) -#define TIM_CCMR1_OC1PE_Msk (0x1U << TIM_CCMR1_OC1PE_Pos) /*!< 0x00000008 */ -#define TIM_CCMR1_OC1PE TIM_CCMR1_OC1PE_Msk /*!<Output Compare 1 Preload enable */ - -#define TIM_CCMR1_OC1M_Pos (4U) -#define TIM_CCMR1_OC1M_Msk (0x7U << TIM_CCMR1_OC1M_Pos) /*!< 0x00000070 */ -#define TIM_CCMR1_OC1M TIM_CCMR1_OC1M_Msk /*!<OC1M[2:0] bits (Output Compare 1 Mode) */ -#define TIM_CCMR1_OC1M_0 (0x1U << TIM_CCMR1_OC1M_Pos) /*!< 0x00000010 */ -#define TIM_CCMR1_OC1M_1 (0x2U << TIM_CCMR1_OC1M_Pos) /*!< 0x00000020 */ -#define TIM_CCMR1_OC1M_2 (0x4U << TIM_CCMR1_OC1M_Pos) /*!< 0x00000040 */ - -#define TIM_CCMR1_OC1CE_Pos (7U) -#define TIM_CCMR1_OC1CE_Msk (0x1U << TIM_CCMR1_OC1CE_Pos) /*!< 0x00000080 */ -#define TIM_CCMR1_OC1CE TIM_CCMR1_OC1CE_Msk /*!<Output Compare 1Clear Enable */ - -#define TIM_CCMR1_CC2S_Pos (8U) -#define TIM_CCMR1_CC2S_Msk (0x3U << TIM_CCMR1_CC2S_Pos) /*!< 0x00000300 */ -#define TIM_CCMR1_CC2S TIM_CCMR1_CC2S_Msk /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */ -#define TIM_CCMR1_CC2S_0 (0x1U << TIM_CCMR1_CC2S_Pos) /*!< 0x00000100 */ -#define TIM_CCMR1_CC2S_1 (0x2U << TIM_CCMR1_CC2S_Pos) /*!< 0x00000200 */ - -#define TIM_CCMR1_OC2FE_Pos (10U) -#define TIM_CCMR1_OC2FE_Msk (0x1U << TIM_CCMR1_OC2FE_Pos) /*!< 0x00000400 */ -#define TIM_CCMR1_OC2FE TIM_CCMR1_OC2FE_Msk /*!<Output Compare 2 Fast enable */ -#define TIM_CCMR1_OC2PE_Pos (11U) -#define TIM_CCMR1_OC2PE_Msk (0x1U << TIM_CCMR1_OC2PE_Pos) /*!< 0x00000800 */ -#define TIM_CCMR1_OC2PE TIM_CCMR1_OC2PE_Msk /*!<Output Compare 2 Preload enable */ - -#define TIM_CCMR1_OC2M_Pos (12U) -#define TIM_CCMR1_OC2M_Msk (0x7U << TIM_CCMR1_OC2M_Pos) /*!< 0x00007000 */ -#define TIM_CCMR1_OC2M TIM_CCMR1_OC2M_Msk /*!<OC2M[2:0] bits (Output Compare 2 Mode) */ -#define TIM_CCMR1_OC2M_0 (0x1U << TIM_CCMR1_OC2M_Pos) /*!< 0x00001000 */ -#define TIM_CCMR1_OC2M_1 (0x2U << TIM_CCMR1_OC2M_Pos) /*!< 0x00002000 */ -#define TIM_CCMR1_OC2M_2 (0x4U << TIM_CCMR1_OC2M_Pos) /*!< 0x00004000 */ - -#define TIM_CCMR1_OC2CE_Pos (15U) -#define TIM_CCMR1_OC2CE_Msk (0x1U << TIM_CCMR1_OC2CE_Pos) /*!< 0x00008000 */ -#define TIM_CCMR1_OC2CE TIM_CCMR1_OC2CE_Msk /*!<Output Compare 2 Clear Enable */ - -/*---------------------------------------------------------------------------*/ - -#define TIM_CCMR1_IC1PSC_Pos (2U) -#define TIM_CCMR1_IC1PSC_Msk (0x3U << TIM_CCMR1_IC1PSC_Pos) /*!< 0x0000000C */ -#define TIM_CCMR1_IC1PSC TIM_CCMR1_IC1PSC_Msk /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */ -#define TIM_CCMR1_IC1PSC_0 (0x1U << TIM_CCMR1_IC1PSC_Pos) /*!< 0x00000004 */ -#define TIM_CCMR1_IC1PSC_1 (0x2U << TIM_CCMR1_IC1PSC_Pos) /*!< 0x00000008 */ - -#define TIM_CCMR1_IC1F_Pos (4U) -#define TIM_CCMR1_IC1F_Msk (0xFU << TIM_CCMR1_IC1F_Pos) /*!< 0x000000F0 */ -#define TIM_CCMR1_IC1F TIM_CCMR1_IC1F_Msk /*!<IC1F[3:0] bits (Input Capture 1 Filter) */ -#define TIM_CCMR1_IC1F_0 (0x1U << TIM_CCMR1_IC1F_Pos) /*!< 0x00000010 */ -#define TIM_CCMR1_IC1F_1 (0x2U << TIM_CCMR1_IC1F_Pos) /*!< 0x00000020 */ -#define TIM_CCMR1_IC1F_2 (0x4U << TIM_CCMR1_IC1F_Pos) /*!< 0x00000040 */ -#define TIM_CCMR1_IC1F_3 (0x8U << TIM_CCMR1_IC1F_Pos) /*!< 0x00000080 */ - -#define TIM_CCMR1_IC2PSC_Pos (10U) -#define TIM_CCMR1_IC2PSC_Msk (0x3U << TIM_CCMR1_IC2PSC_Pos) /*!< 0x00000C00 */ -#define TIM_CCMR1_IC2PSC TIM_CCMR1_IC2PSC_Msk /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */ -#define TIM_CCMR1_IC2PSC_0 (0x1U << TIM_CCMR1_IC2PSC_Pos) /*!< 0x00000400 */ -#define TIM_CCMR1_IC2PSC_1 (0x2U << TIM_CCMR1_IC2PSC_Pos) /*!< 0x00000800 */ - -#define TIM_CCMR1_IC2F_Pos (12U) -#define TIM_CCMR1_IC2F_Msk (0xFU << TIM_CCMR1_IC2F_Pos) /*!< 0x0000F000 */ -#define TIM_CCMR1_IC2F TIM_CCMR1_IC2F_Msk /*!<IC2F[3:0] bits (Input Capture 2 Filter) */ -#define TIM_CCMR1_IC2F_0 (0x1U << TIM_CCMR1_IC2F_Pos) /*!< 0x00001000 */ -#define TIM_CCMR1_IC2F_1 (0x2U << TIM_CCMR1_IC2F_Pos) /*!< 0x00002000 */ -#define TIM_CCMR1_IC2F_2 (0x4U << TIM_CCMR1_IC2F_Pos) /*!< 0x00004000 */ -#define TIM_CCMR1_IC2F_3 (0x8U << TIM_CCMR1_IC2F_Pos) /*!< 0x00008000 */ - -/****************** Bit definition for TIM_CCMR2 register ******************/ -#define TIM_CCMR2_CC3S_Pos (0U) -#define TIM_CCMR2_CC3S_Msk (0x3U << TIM_CCMR2_CC3S_Pos) /*!< 0x00000003 */ -#define TIM_CCMR2_CC3S TIM_CCMR2_CC3S_Msk /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */ -#define TIM_CCMR2_CC3S_0 (0x1U << TIM_CCMR2_CC3S_Pos) /*!< 0x00000001 */ -#define TIM_CCMR2_CC3S_1 (0x2U << TIM_CCMR2_CC3S_Pos) /*!< 0x00000002 */ - -#define TIM_CCMR2_OC3FE_Pos (2U) -#define TIM_CCMR2_OC3FE_Msk (0x1U << TIM_CCMR2_OC3FE_Pos) /*!< 0x00000004 */ -#define TIM_CCMR2_OC3FE TIM_CCMR2_OC3FE_Msk /*!<Output Compare 3 Fast enable */ -#define TIM_CCMR2_OC3PE_Pos (3U) -#define TIM_CCMR2_OC3PE_Msk (0x1U << TIM_CCMR2_OC3PE_Pos) /*!< 0x00000008 */ -#define TIM_CCMR2_OC3PE TIM_CCMR2_OC3PE_Msk /*!<Output Compare 3 Preload enable */ - -#define TIM_CCMR2_OC3M_Pos (4U) -#define TIM_CCMR2_OC3M_Msk (0x7U << TIM_CCMR2_OC3M_Pos) /*!< 0x00000070 */ -#define TIM_CCMR2_OC3M TIM_CCMR2_OC3M_Msk /*!<OC3M[2:0] bits (Output Compare 3 Mode) */ -#define TIM_CCMR2_OC3M_0 (0x1U << TIM_CCMR2_OC3M_Pos) /*!< 0x00000010 */ -#define TIM_CCMR2_OC3M_1 (0x2U << TIM_CCMR2_OC3M_Pos) /*!< 0x00000020 */ -#define TIM_CCMR2_OC3M_2 (0x4U << TIM_CCMR2_OC3M_Pos) /*!< 0x00000040 */ - -#define TIM_CCMR2_OC3CE_Pos (7U) -#define TIM_CCMR2_OC3CE_Msk (0x1U << TIM_CCMR2_OC3CE_Pos) /*!< 0x00000080 */ -#define TIM_CCMR2_OC3CE TIM_CCMR2_OC3CE_Msk /*!<Output Compare 3 Clear Enable */ - -#define TIM_CCMR2_CC4S_Pos (8U) -#define TIM_CCMR2_CC4S_Msk (0x3U << TIM_CCMR2_CC4S_Pos) /*!< 0x00000300 */ -#define TIM_CCMR2_CC4S TIM_CCMR2_CC4S_Msk /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */ -#define TIM_CCMR2_CC4S_0 (0x1U << TIM_CCMR2_CC4S_Pos) /*!< 0x00000100 */ -#define TIM_CCMR2_CC4S_1 (0x2U << TIM_CCMR2_CC4S_Pos) /*!< 0x00000200 */ - -#define TIM_CCMR2_OC4FE_Pos (10U) -#define TIM_CCMR2_OC4FE_Msk (0x1U << TIM_CCMR2_OC4FE_Pos) /*!< 0x00000400 */ -#define TIM_CCMR2_OC4FE TIM_CCMR2_OC4FE_Msk /*!<Output Compare 4 Fast enable */ -#define TIM_CCMR2_OC4PE_Pos (11U) -#define TIM_CCMR2_OC4PE_Msk (0x1U << TIM_CCMR2_OC4PE_Pos) /*!< 0x00000800 */ -#define TIM_CCMR2_OC4PE TIM_CCMR2_OC4PE_Msk /*!<Output Compare 4 Preload enable */ - -#define TIM_CCMR2_OC4M_Pos (12U) -#define TIM_CCMR2_OC4M_Msk (0x7U << TIM_CCMR2_OC4M_Pos) /*!< 0x00007000 */ -#define TIM_CCMR2_OC4M TIM_CCMR2_OC4M_Msk /*!<OC4M[2:0] bits (Output Compare 4 Mode) */ -#define TIM_CCMR2_OC4M_0 (0x1U << TIM_CCMR2_OC4M_Pos) /*!< 0x00001000 */ -#define TIM_CCMR2_OC4M_1 (0x2U << TIM_CCMR2_OC4M_Pos) /*!< 0x00002000 */ -#define TIM_CCMR2_OC4M_2 (0x4U << TIM_CCMR2_OC4M_Pos) /*!< 0x00004000 */ - -#define TIM_CCMR2_OC4CE_Pos (15U) -#define TIM_CCMR2_OC4CE_Msk (0x1U << TIM_CCMR2_OC4CE_Pos) /*!< 0x00008000 */ -#define TIM_CCMR2_OC4CE TIM_CCMR2_OC4CE_Msk /*!<Output Compare 4 Clear Enable */ - -/*---------------------------------------------------------------------------*/ - -#define TIM_CCMR2_IC3PSC_Pos (2U) -#define TIM_CCMR2_IC3PSC_Msk (0x3U << TIM_CCMR2_IC3PSC_Pos) /*!< 0x0000000C */ -#define TIM_CCMR2_IC3PSC TIM_CCMR2_IC3PSC_Msk /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */ -#define TIM_CCMR2_IC3PSC_0 (0x1U << TIM_CCMR2_IC3PSC_Pos) /*!< 0x00000004 */ -#define TIM_CCMR2_IC3PSC_1 (0x2U << TIM_CCMR2_IC3PSC_Pos) /*!< 0x00000008 */ - -#define TIM_CCMR2_IC3F_Pos (4U) -#define TIM_CCMR2_IC3F_Msk (0xFU << TIM_CCMR2_IC3F_Pos) /*!< 0x000000F0 */ -#define TIM_CCMR2_IC3F TIM_CCMR2_IC3F_Msk /*!<IC3F[3:0] bits (Input Capture 3 Filter) */ -#define TIM_CCMR2_IC3F_0 (0x1U << TIM_CCMR2_IC3F_Pos) /*!< 0x00000010 */ -#define TIM_CCMR2_IC3F_1 (0x2U << TIM_CCMR2_IC3F_Pos) /*!< 0x00000020 */ -#define TIM_CCMR2_IC3F_2 (0x4U << TIM_CCMR2_IC3F_Pos) /*!< 0x00000040 */ -#define TIM_CCMR2_IC3F_3 (0x8U << TIM_CCMR2_IC3F_Pos) /*!< 0x00000080 */ - -#define TIM_CCMR2_IC4PSC_Pos (10U) -#define TIM_CCMR2_IC4PSC_Msk (0x3U << TIM_CCMR2_IC4PSC_Pos) /*!< 0x00000C00 */ -#define TIM_CCMR2_IC4PSC TIM_CCMR2_IC4PSC_Msk /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */ -#define TIM_CCMR2_IC4PSC_0 (0x1U << TIM_CCMR2_IC4PSC_Pos) /*!< 0x00000400 */ -#define TIM_CCMR2_IC4PSC_1 (0x2U << TIM_CCMR2_IC4PSC_Pos) /*!< 0x00000800 */ - -#define TIM_CCMR2_IC4F_Pos (12U) -#define TIM_CCMR2_IC4F_Msk (0xFU << TIM_CCMR2_IC4F_Pos) /*!< 0x0000F000 */ -#define TIM_CCMR2_IC4F TIM_CCMR2_IC4F_Msk /*!<IC4F[3:0] bits (Input Capture 4 Filter) */ -#define TIM_CCMR2_IC4F_0 (0x1U << TIM_CCMR2_IC4F_Pos) /*!< 0x00001000 */ -#define TIM_CCMR2_IC4F_1 (0x2U << TIM_CCMR2_IC4F_Pos) /*!< 0x00002000 */ -#define TIM_CCMR2_IC4F_2 (0x4U << TIM_CCMR2_IC4F_Pos) /*!< 0x00004000 */ -#define TIM_CCMR2_IC4F_3 (0x8U << TIM_CCMR2_IC4F_Pos) /*!< 0x00008000 */ - -/******************* Bit definition for TIM_CCER register ******************/ -#define TIM_CCER_CC1E_Pos (0U) -#define TIM_CCER_CC1E_Msk (0x1U << TIM_CCER_CC1E_Pos) /*!< 0x00000001 */ -#define TIM_CCER_CC1E TIM_CCER_CC1E_Msk /*!<Capture/Compare 1 output enable */ -#define TIM_CCER_CC1P_Pos (1U) -#define TIM_CCER_CC1P_Msk (0x1U << TIM_CCER_CC1P_Pos) /*!< 0x00000002 */ -#define TIM_CCER_CC1P TIM_CCER_CC1P_Msk /*!<Capture/Compare 1 output Polarity */ -#define TIM_CCER_CC1NE_Pos (2U) -#define TIM_CCER_CC1NE_Msk (0x1U << TIM_CCER_CC1NE_Pos) /*!< 0x00000004 */ -#define TIM_CCER_CC1NE TIM_CCER_CC1NE_Msk /*!<Capture/Compare 1 Complementary output enable */ -#define TIM_CCER_CC1NP_Pos (3U) -#define TIM_CCER_CC1NP_Msk (0x1U << TIM_CCER_CC1NP_Pos) /*!< 0x00000008 */ -#define TIM_CCER_CC1NP TIM_CCER_CC1NP_Msk /*!<Capture/Compare 1 Complementary output Polarity */ -#define TIM_CCER_CC2E_Pos (4U) -#define TIM_CCER_CC2E_Msk (0x1U << TIM_CCER_CC2E_Pos) /*!< 0x00000010 */ -#define TIM_CCER_CC2E TIM_CCER_CC2E_Msk /*!<Capture/Compare 2 output enable */ -#define TIM_CCER_CC2P_Pos (5U) -#define TIM_CCER_CC2P_Msk (0x1U << TIM_CCER_CC2P_Pos) /*!< 0x00000020 */ -#define TIM_CCER_CC2P TIM_CCER_CC2P_Msk /*!<Capture/Compare 2 output Polarity */ -#define TIM_CCER_CC2NE_Pos (6U) -#define TIM_CCER_CC2NE_Msk (0x1U << TIM_CCER_CC2NE_Pos) /*!< 0x00000040 */ -#define TIM_CCER_CC2NE TIM_CCER_CC2NE_Msk /*!<Capture/Compare 2 Complementary output enable */ -#define TIM_CCER_CC2NP_Pos (7U) -#define TIM_CCER_CC2NP_Msk (0x1U << TIM_CCER_CC2NP_Pos) /*!< 0x00000080 */ -#define TIM_CCER_CC2NP TIM_CCER_CC2NP_Msk /*!<Capture/Compare 2 Complementary output Polarity */ -#define TIM_CCER_CC3E_Pos (8U) -#define TIM_CCER_CC3E_Msk (0x1U << TIM_CCER_CC3E_Pos) /*!< 0x00000100 */ -#define TIM_CCER_CC3E TIM_CCER_CC3E_Msk /*!<Capture/Compare 3 output enable */ -#define TIM_CCER_CC3P_Pos (9U) -#define TIM_CCER_CC3P_Msk (0x1U << TIM_CCER_CC3P_Pos) /*!< 0x00000200 */ -#define TIM_CCER_CC3P TIM_CCER_CC3P_Msk /*!<Capture/Compare 3 output Polarity */ -#define TIM_CCER_CC3NE_Pos (10U) -#define TIM_CCER_CC3NE_Msk (0x1U << TIM_CCER_CC3NE_Pos) /*!< 0x00000400 */ -#define TIM_CCER_CC3NE TIM_CCER_CC3NE_Msk /*!<Capture/Compare 3 Complementary output enable */ -#define TIM_CCER_CC3NP_Pos (11U) -#define TIM_CCER_CC3NP_Msk (0x1U << TIM_CCER_CC3NP_Pos) /*!< 0x00000800 */ -#define TIM_CCER_CC3NP TIM_CCER_CC3NP_Msk /*!<Capture/Compare 3 Complementary output Polarity */ -#define TIM_CCER_CC4E_Pos (12U) -#define TIM_CCER_CC4E_Msk (0x1U << TIM_CCER_CC4E_Pos) /*!< 0x00001000 */ -#define TIM_CCER_CC4E TIM_CCER_CC4E_Msk /*!<Capture/Compare 4 output enable */ -#define TIM_CCER_CC4P_Pos (13U) -#define TIM_CCER_CC4P_Msk (0x1U << TIM_CCER_CC4P_Pos) /*!< 0x00002000 */ -#define TIM_CCER_CC4P TIM_CCER_CC4P_Msk /*!<Capture/Compare 4 output Polarity */ -#define TIM_CCER_CC4NP_Pos (15U) -#define TIM_CCER_CC4NP_Msk (0x1U << TIM_CCER_CC4NP_Pos) /*!< 0x00008000 */ -#define TIM_CCER_CC4NP TIM_CCER_CC4NP_Msk /*!<Capture/Compare 4 Complementary output Polarity */ - -/******************* Bit definition for TIM_CNT register *******************/ -#define TIM_CNT_CNT_Pos (0U) -#define TIM_CNT_CNT_Msk (0xFFFFFFFFU << TIM_CNT_CNT_Pos) /*!< 0xFFFFFFFF */ -#define TIM_CNT_CNT TIM_CNT_CNT_Msk /*!<Counter Value */ - -/******************* Bit definition for TIM_PSC register *******************/ -#define TIM_PSC_PSC_Pos (0U) -#define TIM_PSC_PSC_Msk (0xFFFFU << TIM_PSC_PSC_Pos) /*!< 0x0000FFFF */ -#define TIM_PSC_PSC TIM_PSC_PSC_Msk /*!<Prescaler Value */ - -/******************* Bit definition for TIM_ARR register *******************/ -#define TIM_ARR_ARR_Pos (0U) -#define TIM_ARR_ARR_Msk (0xFFFFFFFFU << TIM_ARR_ARR_Pos) /*!< 0xFFFFFFFF */ -#define TIM_ARR_ARR TIM_ARR_ARR_Msk /*!<actual auto-reload Value */ - -/******************* Bit definition for TIM_RCR register *******************/ -#define TIM_RCR_REP_Pos (0U) -#define TIM_RCR_REP_Msk (0xFFU << TIM_RCR_REP_Pos) /*!< 0x000000FF */ -#define TIM_RCR_REP TIM_RCR_REP_Msk /*!<Repetition Counter Value */ - -/******************* Bit definition for TIM_CCR1 register ******************/ -#define TIM_CCR1_CCR1_Pos (0U) -#define TIM_CCR1_CCR1_Msk (0xFFFFU << TIM_CCR1_CCR1_Pos) /*!< 0x0000FFFF */ -#define TIM_CCR1_CCR1 TIM_CCR1_CCR1_Msk /*!<Capture/Compare 1 Value */ - -/******************* Bit definition for TIM_CCR2 register ******************/ -#define TIM_CCR2_CCR2_Pos (0U) -#define TIM_CCR2_CCR2_Msk (0xFFFFU << TIM_CCR2_CCR2_Pos) /*!< 0x0000FFFF */ -#define TIM_CCR2_CCR2 TIM_CCR2_CCR2_Msk /*!<Capture/Compare 2 Value */ - -/******************* Bit definition for TIM_CCR3 register ******************/ -#define TIM_CCR3_CCR3_Pos (0U) -#define TIM_CCR3_CCR3_Msk (0xFFFFU << TIM_CCR3_CCR3_Pos) /*!< 0x0000FFFF */ -#define TIM_CCR3_CCR3 TIM_CCR3_CCR3_Msk /*!<Capture/Compare 3 Value */ - -/******************* Bit definition for TIM_CCR4 register ******************/ -#define TIM_CCR4_CCR4_Pos (0U) -#define TIM_CCR4_CCR4_Msk (0xFFFFU << TIM_CCR4_CCR4_Pos) /*!< 0x0000FFFF */ -#define TIM_CCR4_CCR4 TIM_CCR4_CCR4_Msk /*!<Capture/Compare 4 Value */ - -/******************* Bit definition for TIM_BDTR register ******************/ -#define TIM_BDTR_DTG_Pos (0U) -#define TIM_BDTR_DTG_Msk (0xFFU << TIM_BDTR_DTG_Pos) /*!< 0x000000FF */ -#define TIM_BDTR_DTG TIM_BDTR_DTG_Msk /*!<DTG[0:7] bits (Dead-Time Generator set-up) */ -#define TIM_BDTR_DTG_0 (0x01U << TIM_BDTR_DTG_Pos) /*!< 0x00000001 */ -#define TIM_BDTR_DTG_1 (0x02U << TIM_BDTR_DTG_Pos) /*!< 0x00000002 */ -#define TIM_BDTR_DTG_2 (0x04U << TIM_BDTR_DTG_Pos) /*!< 0x00000004 */ -#define TIM_BDTR_DTG_3 (0x08U << TIM_BDTR_DTG_Pos) /*!< 0x00000008 */ -#define TIM_BDTR_DTG_4 (0x10U << TIM_BDTR_DTG_Pos) /*!< 0x00000010 */ -#define TIM_BDTR_DTG_5 (0x20U << TIM_BDTR_DTG_Pos) /*!< 0x00000020 */ -#define TIM_BDTR_DTG_6 (0x40U << TIM_BDTR_DTG_Pos) /*!< 0x00000040 */ -#define TIM_BDTR_DTG_7 (0x80U << TIM_BDTR_DTG_Pos) /*!< 0x00000080 */ - -#define TIM_BDTR_LOCK_Pos (8U) -#define TIM_BDTR_LOCK_Msk (0x3U << TIM_BDTR_LOCK_Pos) /*!< 0x00000300 */ -#define TIM_BDTR_LOCK TIM_BDTR_LOCK_Msk /*!<LOCK[1:0] bits (Lock Configuration) */ -#define TIM_BDTR_LOCK_0 (0x1U << TIM_BDTR_LOCK_Pos) /*!< 0x00000100 */ -#define TIM_BDTR_LOCK_1 (0x2U << TIM_BDTR_LOCK_Pos) /*!< 0x00000200 */ - -#define TIM_BDTR_OSSI_Pos (10U) -#define TIM_BDTR_OSSI_Msk (0x1U << TIM_BDTR_OSSI_Pos) /*!< 0x00000400 */ -#define TIM_BDTR_OSSI TIM_BDTR_OSSI_Msk /*!<Off-State Selection for Idle mode */ -#define TIM_BDTR_OSSR_Pos (11U) -#define TIM_BDTR_OSSR_Msk (0x1U << TIM_BDTR_OSSR_Pos) /*!< 0x00000800 */ -#define TIM_BDTR_OSSR TIM_BDTR_OSSR_Msk /*!<Off-State Selection for Run mode */ -#define TIM_BDTR_BKE_Pos (12U) -#define TIM_BDTR_BKE_Msk (0x1U << TIM_BDTR_BKE_Pos) /*!< 0x00001000 */ -#define TIM_BDTR_BKE TIM_BDTR_BKE_Msk /*!<Break enable */ -#define TIM_BDTR_BKP_Pos (13U) -#define TIM_BDTR_BKP_Msk (0x1U << TIM_BDTR_BKP_Pos) /*!< 0x00002000 */ -#define TIM_BDTR_BKP TIM_BDTR_BKP_Msk /*!<Break Polarity */ -#define TIM_BDTR_AOE_Pos (14U) -#define TIM_BDTR_AOE_Msk (0x1U << TIM_BDTR_AOE_Pos) /*!< 0x00004000 */ -#define TIM_BDTR_AOE TIM_BDTR_AOE_Msk /*!<Automatic Output enable */ -#define TIM_BDTR_MOE_Pos (15U) -#define TIM_BDTR_MOE_Msk (0x1U << TIM_BDTR_MOE_Pos) /*!< 0x00008000 */ -#define TIM_BDTR_MOE TIM_BDTR_MOE_Msk /*!<Main Output enable */ - -/******************* Bit definition for TIM_DCR register *******************/ -#define TIM_DCR_DBA_Pos (0U) -#define TIM_DCR_DBA_Msk (0x1FU << TIM_DCR_DBA_Pos) /*!< 0x0000001F */ -#define TIM_DCR_DBA TIM_DCR_DBA_Msk /*!<DBA[4:0] bits (DMA Base Address) */ -#define TIM_DCR_DBA_0 (0x01U << TIM_DCR_DBA_Pos) /*!< 0x00000001 */ -#define TIM_DCR_DBA_1 (0x02U << TIM_DCR_DBA_Pos) /*!< 0x00000002 */ -#define TIM_DCR_DBA_2 (0x04U << TIM_DCR_DBA_Pos) /*!< 0x00000004 */ -#define TIM_DCR_DBA_3 (0x08U << TIM_DCR_DBA_Pos) /*!< 0x00000008 */ -#define TIM_DCR_DBA_4 (0x10U << TIM_DCR_DBA_Pos) /*!< 0x00000010 */ - -#define TIM_DCR_DBL_Pos (8U) -#define TIM_DCR_DBL_Msk (0x1FU << TIM_DCR_DBL_Pos) /*!< 0x00001F00 */ -#define TIM_DCR_DBL TIM_DCR_DBL_Msk /*!<DBL[4:0] bits (DMA Burst Length) */ -#define TIM_DCR_DBL_0 (0x01U << TIM_DCR_DBL_Pos) /*!< 0x00000100 */ -#define TIM_DCR_DBL_1 (0x02U << TIM_DCR_DBL_Pos) /*!< 0x00000200 */ -#define TIM_DCR_DBL_2 (0x04U << TIM_DCR_DBL_Pos) /*!< 0x00000400 */ -#define TIM_DCR_DBL_3 (0x08U << TIM_DCR_DBL_Pos) /*!< 0x00000800 */ -#define TIM_DCR_DBL_4 (0x10U << TIM_DCR_DBL_Pos) /*!< 0x00001000 */ - -/******************* Bit definition for TIM_DMAR register ******************/ -#define TIM_DMAR_DMAB_Pos (0U) -#define TIM_DMAR_DMAB_Msk (0xFFFFU << TIM_DMAR_DMAB_Pos) /*!< 0x0000FFFF */ -#define TIM_DMAR_DMAB TIM_DMAR_DMAB_Msk /*!<DMA register for burst accesses */ - -/******************* Bit definition for TIM_OR register ********************/ - -/******************************************************************************/ -/* */ -/* Real-Time Clock */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for RTC_CRH register ********************/ -#define RTC_CRH_SECIE_Pos (0U) -#define RTC_CRH_SECIE_Msk (0x1U << RTC_CRH_SECIE_Pos) /*!< 0x00000001 */ -#define RTC_CRH_SECIE RTC_CRH_SECIE_Msk /*!< Second Interrupt Enable */ -#define RTC_CRH_ALRIE_Pos (1U) -#define RTC_CRH_ALRIE_Msk (0x1U << RTC_CRH_ALRIE_Pos) /*!< 0x00000002 */ -#define RTC_CRH_ALRIE RTC_CRH_ALRIE_Msk /*!< Alarm Interrupt Enable */ -#define RTC_CRH_OWIE_Pos (2U) -#define RTC_CRH_OWIE_Msk (0x1U << RTC_CRH_OWIE_Pos) /*!< 0x00000004 */ -#define RTC_CRH_OWIE RTC_CRH_OWIE_Msk /*!< OverfloW Interrupt Enable */ - -/******************* Bit definition for RTC_CRL register ********************/ -#define RTC_CRL_SECF_Pos (0U) -#define RTC_CRL_SECF_Msk (0x1U << RTC_CRL_SECF_Pos) /*!< 0x00000001 */ -#define RTC_CRL_SECF RTC_CRL_SECF_Msk /*!< Second Flag */ -#define RTC_CRL_ALRF_Pos (1U) -#define RTC_CRL_ALRF_Msk (0x1U << RTC_CRL_ALRF_Pos) /*!< 0x00000002 */ -#define RTC_CRL_ALRF RTC_CRL_ALRF_Msk /*!< Alarm Flag */ -#define RTC_CRL_OWF_Pos (2U) -#define RTC_CRL_OWF_Msk (0x1U << RTC_CRL_OWF_Pos) /*!< 0x00000004 */ -#define RTC_CRL_OWF RTC_CRL_OWF_Msk /*!< OverfloW Flag */ -#define RTC_CRL_RSF_Pos (3U) -#define RTC_CRL_RSF_Msk (0x1U << RTC_CRL_RSF_Pos) /*!< 0x00000008 */ -#define RTC_CRL_RSF RTC_CRL_RSF_Msk /*!< Registers Synchronized Flag */ -#define RTC_CRL_CNF_Pos (4U) -#define RTC_CRL_CNF_Msk (0x1U << RTC_CRL_CNF_Pos) /*!< 0x00000010 */ -#define RTC_CRL_CNF RTC_CRL_CNF_Msk /*!< Configuration Flag */ -#define RTC_CRL_RTOFF_Pos (5U) -#define RTC_CRL_RTOFF_Msk (0x1U << RTC_CRL_RTOFF_Pos) /*!< 0x00000020 */ -#define RTC_CRL_RTOFF RTC_CRL_RTOFF_Msk /*!< RTC operation OFF */ - -/******************* Bit definition for RTC_PRLH register *******************/ -#define RTC_PRLH_PRL_Pos (0U) -#define RTC_PRLH_PRL_Msk (0xFU << RTC_PRLH_PRL_Pos) /*!< 0x0000000F */ -#define RTC_PRLH_PRL RTC_PRLH_PRL_Msk /*!< RTC Prescaler Reload Value High */ - -/******************* Bit definition for RTC_PRLL register *******************/ -#define RTC_PRLL_PRL_Pos (0U) -#define RTC_PRLL_PRL_Msk (0xFFFFU << RTC_PRLL_PRL_Pos) /*!< 0x0000FFFF */ -#define RTC_PRLL_PRL RTC_PRLL_PRL_Msk /*!< RTC Prescaler Reload Value Low */ - -/******************* Bit definition for RTC_DIVH register *******************/ -#define RTC_DIVH_RTC_DIV_Pos (0U) -#define RTC_DIVH_RTC_DIV_Msk (0xFU << RTC_DIVH_RTC_DIV_Pos) /*!< 0x0000000F */ -#define RTC_DIVH_RTC_DIV RTC_DIVH_RTC_DIV_Msk /*!< RTC Clock Divider High */ - -/******************* Bit definition for RTC_DIVL register *******************/ -#define RTC_DIVL_RTC_DIV_Pos (0U) -#define RTC_DIVL_RTC_DIV_Msk (0xFFFFU << RTC_DIVL_RTC_DIV_Pos) /*!< 0x0000FFFF */ -#define RTC_DIVL_RTC_DIV RTC_DIVL_RTC_DIV_Msk /*!< RTC Clock Divider Low */ - -/******************* Bit definition for RTC_CNTH register *******************/ -#define RTC_CNTH_RTC_CNT_Pos (0U) -#define RTC_CNTH_RTC_CNT_Msk (0xFFFFU << RTC_CNTH_RTC_CNT_Pos) /*!< 0x0000FFFF */ -#define RTC_CNTH_RTC_CNT RTC_CNTH_RTC_CNT_Msk /*!< RTC Counter High */ - -/******************* Bit definition for RTC_CNTL register *******************/ -#define RTC_CNTL_RTC_CNT_Pos (0U) -#define RTC_CNTL_RTC_CNT_Msk (0xFFFFU << RTC_CNTL_RTC_CNT_Pos) /*!< 0x0000FFFF */ -#define RTC_CNTL_RTC_CNT RTC_CNTL_RTC_CNT_Msk /*!< RTC Counter Low */ - -/******************* Bit definition for RTC_ALRH register *******************/ -#define RTC_ALRH_RTC_ALR_Pos (0U) -#define RTC_ALRH_RTC_ALR_Msk (0xFFFFU << RTC_ALRH_RTC_ALR_Pos) /*!< 0x0000FFFF */ -#define RTC_ALRH_RTC_ALR RTC_ALRH_RTC_ALR_Msk /*!< RTC Alarm High */ - -/******************* Bit definition for RTC_ALRL register *******************/ -#define RTC_ALRL_RTC_ALR_Pos (0U) -#define RTC_ALRL_RTC_ALR_Msk (0xFFFFU << RTC_ALRL_RTC_ALR_Pos) /*!< 0x0000FFFF */ -#define RTC_ALRL_RTC_ALR RTC_ALRL_RTC_ALR_Msk /*!< RTC Alarm Low */ - -/******************************************************************************/ -/* */ -/* Independent WATCHDOG (IWDG) */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for IWDG_KR register ********************/ -#define IWDG_KR_KEY_Pos (0U) -#define IWDG_KR_KEY_Msk (0xFFFFU << IWDG_KR_KEY_Pos) /*!< 0x0000FFFF */ -#define IWDG_KR_KEY IWDG_KR_KEY_Msk /*!< Key value (write only, read 0000h) */ - -/******************* Bit definition for IWDG_PR register ********************/ -#define IWDG_PR_PR_Pos (0U) -#define IWDG_PR_PR_Msk (0x7U << IWDG_PR_PR_Pos) /*!< 0x00000007 */ -#define IWDG_PR_PR IWDG_PR_PR_Msk /*!< PR[2:0] (Prescaler divider) */ -#define IWDG_PR_PR_0 (0x1U << IWDG_PR_PR_Pos) /*!< 0x00000001 */ -#define IWDG_PR_PR_1 (0x2U << IWDG_PR_PR_Pos) /*!< 0x00000002 */ -#define IWDG_PR_PR_2 (0x4U << IWDG_PR_PR_Pos) /*!< 0x00000004 */ - -/******************* Bit definition for IWDG_RLR register *******************/ -#define IWDG_RLR_RL_Pos (0U) -#define IWDG_RLR_RL_Msk (0xFFFU << IWDG_RLR_RL_Pos) /*!< 0x00000FFF */ -#define IWDG_RLR_RL IWDG_RLR_RL_Msk /*!< Watchdog counter reload value */ - -/******************* Bit definition for IWDG_SR register ********************/ -#define IWDG_SR_PVU_Pos (0U) -#define IWDG_SR_PVU_Msk (0x1U << IWDG_SR_PVU_Pos) /*!< 0x00000001 */ -#define IWDG_SR_PVU IWDG_SR_PVU_Msk /*!< Watchdog prescaler value update */ -#define IWDG_SR_RVU_Pos (1U) -#define IWDG_SR_RVU_Msk (0x1U << IWDG_SR_RVU_Pos) /*!< 0x00000002 */ -#define IWDG_SR_RVU IWDG_SR_RVU_Msk /*!< Watchdog counter reload value update */ - -/******************************************************************************/ -/* */ -/* Window WATCHDOG (WWDG) */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for WWDG_CR register ********************/ -#define WWDG_CR_T_Pos (0U) -#define WWDG_CR_T_Msk (0x7FU << WWDG_CR_T_Pos) /*!< 0x0000007F */ -#define WWDG_CR_T WWDG_CR_T_Msk /*!< T[6:0] bits (7-Bit counter (MSB to LSB)) */ -#define WWDG_CR_T_0 (0x01U << WWDG_CR_T_Pos) /*!< 0x00000001 */ -#define WWDG_CR_T_1 (0x02U << WWDG_CR_T_Pos) /*!< 0x00000002 */ -#define WWDG_CR_T_2 (0x04U << WWDG_CR_T_Pos) /*!< 0x00000004 */ -#define WWDG_CR_T_3 (0x08U << WWDG_CR_T_Pos) /*!< 0x00000008 */ -#define WWDG_CR_T_4 (0x10U << WWDG_CR_T_Pos) /*!< 0x00000010 */ -#define WWDG_CR_T_5 (0x20U << WWDG_CR_T_Pos) /*!< 0x00000020 */ -#define WWDG_CR_T_6 (0x40U << WWDG_CR_T_Pos) /*!< 0x00000040 */ - -/* Legacy defines */ -#define WWDG_CR_T0 WWDG_CR_T_0 -#define WWDG_CR_T1 WWDG_CR_T_1 -#define WWDG_CR_T2 WWDG_CR_T_2 -#define WWDG_CR_T3 WWDG_CR_T_3 -#define WWDG_CR_T4 WWDG_CR_T_4 -#define WWDG_CR_T5 WWDG_CR_T_5 -#define WWDG_CR_T6 WWDG_CR_T_6 - -#define WWDG_CR_WDGA_Pos (7U) -#define WWDG_CR_WDGA_Msk (0x1U << WWDG_CR_WDGA_Pos) /*!< 0x00000080 */ -#define WWDG_CR_WDGA WWDG_CR_WDGA_Msk /*!< Activation bit */ - -/******************* Bit definition for WWDG_CFR register *******************/ -#define WWDG_CFR_W_Pos (0U) -#define WWDG_CFR_W_Msk (0x7FU << WWDG_CFR_W_Pos) /*!< 0x0000007F */ -#define WWDG_CFR_W WWDG_CFR_W_Msk /*!< W[6:0] bits (7-bit window value) */ -#define WWDG_CFR_W_0 (0x01U << WWDG_CFR_W_Pos) /*!< 0x00000001 */ -#define WWDG_CFR_W_1 (0x02U << WWDG_CFR_W_Pos) /*!< 0x00000002 */ -#define WWDG_CFR_W_2 (0x04U << WWDG_CFR_W_Pos) /*!< 0x00000004 */ -#define WWDG_CFR_W_3 (0x08U << WWDG_CFR_W_Pos) /*!< 0x00000008 */ -#define WWDG_CFR_W_4 (0x10U << WWDG_CFR_W_Pos) /*!< 0x00000010 */ -#define WWDG_CFR_W_5 (0x20U << WWDG_CFR_W_Pos) /*!< 0x00000020 */ -#define WWDG_CFR_W_6 (0x40U << WWDG_CFR_W_Pos) /*!< 0x00000040 */ - -/* Legacy defines */ -#define WWDG_CFR_W0 WWDG_CFR_W_0 -#define WWDG_CFR_W1 WWDG_CFR_W_1 -#define WWDG_CFR_W2 WWDG_CFR_W_2 -#define WWDG_CFR_W3 WWDG_CFR_W_3 -#define WWDG_CFR_W4 WWDG_CFR_W_4 -#define WWDG_CFR_W5 WWDG_CFR_W_5 -#define WWDG_CFR_W6 WWDG_CFR_W_6 - -#define WWDG_CFR_WDGTB_Pos (7U) -#define WWDG_CFR_WDGTB_Msk (0x3U << WWDG_CFR_WDGTB_Pos) /*!< 0x00000180 */ -#define WWDG_CFR_WDGTB WWDG_CFR_WDGTB_Msk /*!< WDGTB[1:0] bits (Timer Base) */ -#define WWDG_CFR_WDGTB_0 (0x1U << WWDG_CFR_WDGTB_Pos) /*!< 0x00000080 */ -#define WWDG_CFR_WDGTB_1 (0x2U << WWDG_CFR_WDGTB_Pos) /*!< 0x00000100 */ - -/* Legacy defines */ -#define WWDG_CFR_WDGTB0 WWDG_CFR_WDGTB_0 -#define WWDG_CFR_WDGTB1 WWDG_CFR_WDGTB_1 - -#define WWDG_CFR_EWI_Pos (9U) -#define WWDG_CFR_EWI_Msk (0x1U << WWDG_CFR_EWI_Pos) /*!< 0x00000200 */ -#define WWDG_CFR_EWI WWDG_CFR_EWI_Msk /*!< Early Wakeup Interrupt */ - -/******************* Bit definition for WWDG_SR register ********************/ -#define WWDG_SR_EWIF_Pos (0U) -#define WWDG_SR_EWIF_Msk (0x1U << WWDG_SR_EWIF_Pos) /*!< 0x00000001 */ -#define WWDG_SR_EWIF WWDG_SR_EWIF_Msk /*!< Early Wakeup Interrupt Flag */ - - -/******************************************************************************/ -/* */ -/* SD host Interface */ -/* */ -/******************************************************************************/ - -/****************** Bit definition for SDIO_POWER register ******************/ -#define SDIO_POWER_PWRCTRL_Pos (0U) -#define SDIO_POWER_PWRCTRL_Msk (0x3U << SDIO_POWER_PWRCTRL_Pos) /*!< 0x00000003 */ -#define SDIO_POWER_PWRCTRL SDIO_POWER_PWRCTRL_Msk /*!< PWRCTRL[1:0] bits (Power supply control bits) */ -#define SDIO_POWER_PWRCTRL_0 (0x1U << SDIO_POWER_PWRCTRL_Pos) /*!< 0x01 */ -#define SDIO_POWER_PWRCTRL_1 (0x2U << SDIO_POWER_PWRCTRL_Pos) /*!< 0x02 */ - -/****************** Bit definition for SDIO_CLKCR register ******************/ -#define SDIO_CLKCR_CLKDIV_Pos (0U) -#define SDIO_CLKCR_CLKDIV_Msk (0xFFU << SDIO_CLKCR_CLKDIV_Pos) /*!< 0x000000FF */ -#define SDIO_CLKCR_CLKDIV SDIO_CLKCR_CLKDIV_Msk /*!< Clock divide factor */ -#define SDIO_CLKCR_CLKEN_Pos (8U) -#define SDIO_CLKCR_CLKEN_Msk (0x1U << SDIO_CLKCR_CLKEN_Pos) /*!< 0x00000100 */ -#define SDIO_CLKCR_CLKEN SDIO_CLKCR_CLKEN_Msk /*!< Clock enable bit */ -#define SDIO_CLKCR_PWRSAV_Pos (9U) -#define SDIO_CLKCR_PWRSAV_Msk (0x1U << SDIO_CLKCR_PWRSAV_Pos) /*!< 0x00000200 */ -#define SDIO_CLKCR_PWRSAV SDIO_CLKCR_PWRSAV_Msk /*!< Power saving configuration bit */ -#define SDIO_CLKCR_BYPASS_Pos (10U) -#define SDIO_CLKCR_BYPASS_Msk (0x1U << SDIO_CLKCR_BYPASS_Pos) /*!< 0x00000400 */ -#define SDIO_CLKCR_BYPASS SDIO_CLKCR_BYPASS_Msk /*!< Clock divider bypass enable bit */ - -#define SDIO_CLKCR_WIDBUS_Pos (11U) -#define SDIO_CLKCR_WIDBUS_Msk (0x3U << SDIO_CLKCR_WIDBUS_Pos) /*!< 0x00001800 */ -#define SDIO_CLKCR_WIDBUS SDIO_CLKCR_WIDBUS_Msk /*!< WIDBUS[1:0] bits (Wide bus mode enable bit) */ -#define SDIO_CLKCR_WIDBUS_0 (0x1U << SDIO_CLKCR_WIDBUS_Pos) /*!< 0x0800 */ -#define SDIO_CLKCR_WIDBUS_1 (0x2U << SDIO_CLKCR_WIDBUS_Pos) /*!< 0x1000 */ - -#define SDIO_CLKCR_NEGEDGE_Pos (13U) -#define SDIO_CLKCR_NEGEDGE_Msk (0x1U << SDIO_CLKCR_NEGEDGE_Pos) /*!< 0x00002000 */ -#define SDIO_CLKCR_NEGEDGE SDIO_CLKCR_NEGEDGE_Msk /*!< SDIO_CK dephasing selection bit */ -#define SDIO_CLKCR_HWFC_EN_Pos (14U) -#define SDIO_CLKCR_HWFC_EN_Msk (0x1U << SDIO_CLKCR_HWFC_EN_Pos) /*!< 0x00004000 */ -#define SDIO_CLKCR_HWFC_EN SDIO_CLKCR_HWFC_EN_Msk /*!< HW Flow Control enable */ - -/******************* Bit definition for SDIO_ARG register *******************/ -#define SDIO_ARG_CMDARG_Pos (0U) -#define SDIO_ARG_CMDARG_Msk (0xFFFFFFFFU << SDIO_ARG_CMDARG_Pos) /*!< 0xFFFFFFFF */ -#define SDIO_ARG_CMDARG SDIO_ARG_CMDARG_Msk /*!< Command argument */ - -/******************* Bit definition for SDIO_CMD register *******************/ -#define SDIO_CMD_CMDINDEX_Pos (0U) -#define SDIO_CMD_CMDINDEX_Msk (0x3FU << SDIO_CMD_CMDINDEX_Pos) /*!< 0x0000003F */ -#define SDIO_CMD_CMDINDEX SDIO_CMD_CMDINDEX_Msk /*!< Command Index */ - -#define SDIO_CMD_WAITRESP_Pos (6U) -#define SDIO_CMD_WAITRESP_Msk (0x3U << SDIO_CMD_WAITRESP_Pos) /*!< 0x000000C0 */ -#define SDIO_CMD_WAITRESP SDIO_CMD_WAITRESP_Msk /*!< WAITRESP[1:0] bits (Wait for response bits) */ -#define SDIO_CMD_WAITRESP_0 (0x1U << SDIO_CMD_WAITRESP_Pos) /*!< 0x0040 */ -#define SDIO_CMD_WAITRESP_1 (0x2U << SDIO_CMD_WAITRESP_Pos) /*!< 0x0080 */ - -#define SDIO_CMD_WAITINT_Pos (8U) -#define SDIO_CMD_WAITINT_Msk (0x1U << SDIO_CMD_WAITINT_Pos) /*!< 0x00000100 */ -#define SDIO_CMD_WAITINT SDIO_CMD_WAITINT_Msk /*!< CPSM Waits for Interrupt Request */ -#define SDIO_CMD_WAITPEND_Pos (9U) -#define SDIO_CMD_WAITPEND_Msk (0x1U << SDIO_CMD_WAITPEND_Pos) /*!< 0x00000200 */ -#define SDIO_CMD_WAITPEND SDIO_CMD_WAITPEND_Msk /*!< CPSM Waits for ends of data transfer (CmdPend internal signal) */ -#define SDIO_CMD_CPSMEN_Pos (10U) -#define SDIO_CMD_CPSMEN_Msk (0x1U << SDIO_CMD_CPSMEN_Pos) /*!< 0x00000400 */ -#define SDIO_CMD_CPSMEN SDIO_CMD_CPSMEN_Msk /*!< Command path state machine (CPSM) Enable bit */ -#define SDIO_CMD_SDIOSUSPEND_Pos (11U) -#define SDIO_CMD_SDIOSUSPEND_Msk (0x1U << SDIO_CMD_SDIOSUSPEND_Pos) /*!< 0x00000800 */ -#define SDIO_CMD_SDIOSUSPEND SDIO_CMD_SDIOSUSPEND_Msk /*!< SD I/O suspend command */ -#define SDIO_CMD_ENCMDCOMPL_Pos (12U) -#define SDIO_CMD_ENCMDCOMPL_Msk (0x1U << SDIO_CMD_ENCMDCOMPL_Pos) /*!< 0x00001000 */ -#define SDIO_CMD_ENCMDCOMPL SDIO_CMD_ENCMDCOMPL_Msk /*!< Enable CMD completion */ -#define SDIO_CMD_NIEN_Pos (13U) -#define SDIO_CMD_NIEN_Msk (0x1U << SDIO_CMD_NIEN_Pos) /*!< 0x00002000 */ -#define SDIO_CMD_NIEN SDIO_CMD_NIEN_Msk /*!< Not Interrupt Enable */ -#define SDIO_CMD_CEATACMD_Pos (14U) -#define SDIO_CMD_CEATACMD_Msk (0x1U << SDIO_CMD_CEATACMD_Pos) /*!< 0x00004000 */ -#define SDIO_CMD_CEATACMD SDIO_CMD_CEATACMD_Msk /*!< CE-ATA command */ - -/***************** Bit definition for SDIO_RESPCMD register *****************/ -#define SDIO_RESPCMD_RESPCMD_Pos (0U) -#define SDIO_RESPCMD_RESPCMD_Msk (0x3FU << SDIO_RESPCMD_RESPCMD_Pos) /*!< 0x0000003F */ -#define SDIO_RESPCMD_RESPCMD SDIO_RESPCMD_RESPCMD_Msk /*!< Response command index */ - -/****************** Bit definition for SDIO_RESP0 register ******************/ -#define SDIO_RESP0_CARDSTATUS0_Pos (0U) -#define SDIO_RESP0_CARDSTATUS0_Msk (0xFFFFFFFFU << SDIO_RESP0_CARDSTATUS0_Pos) /*!< 0xFFFFFFFF */ -#define SDIO_RESP0_CARDSTATUS0 SDIO_RESP0_CARDSTATUS0_Msk /*!< Card Status */ - -/****************** Bit definition for SDIO_RESP1 register ******************/ -#define SDIO_RESP1_CARDSTATUS1_Pos (0U) -#define SDIO_RESP1_CARDSTATUS1_Msk (0xFFFFFFFFU << SDIO_RESP1_CARDSTATUS1_Pos) /*!< 0xFFFFFFFF */ -#define SDIO_RESP1_CARDSTATUS1 SDIO_RESP1_CARDSTATUS1_Msk /*!< Card Status */ - -/****************** Bit definition for SDIO_RESP2 register ******************/ -#define SDIO_RESP2_CARDSTATUS2_Pos (0U) -#define SDIO_RESP2_CARDSTATUS2_Msk (0xFFFFFFFFU << SDIO_RESP2_CARDSTATUS2_Pos) /*!< 0xFFFFFFFF */ -#define SDIO_RESP2_CARDSTATUS2 SDIO_RESP2_CARDSTATUS2_Msk /*!< Card Status */ - -/****************** Bit definition for SDIO_RESP3 register ******************/ -#define SDIO_RESP3_CARDSTATUS3_Pos (0U) -#define SDIO_RESP3_CARDSTATUS3_Msk (0xFFFFFFFFU << SDIO_RESP3_CARDSTATUS3_Pos) /*!< 0xFFFFFFFF */ -#define SDIO_RESP3_CARDSTATUS3 SDIO_RESP3_CARDSTATUS3_Msk /*!< Card Status */ - -/****************** Bit definition for SDIO_RESP4 register ******************/ -#define SDIO_RESP4_CARDSTATUS4_Pos (0U) -#define SDIO_RESP4_CARDSTATUS4_Msk (0xFFFFFFFFU << SDIO_RESP4_CARDSTATUS4_Pos) /*!< 0xFFFFFFFF */ -#define SDIO_RESP4_CARDSTATUS4 SDIO_RESP4_CARDSTATUS4_Msk /*!< Card Status */ - -/****************** Bit definition for SDIO_DTIMER register *****************/ -#define SDIO_DTIMER_DATATIME_Pos (0U) -#define SDIO_DTIMER_DATATIME_Msk (0xFFFFFFFFU << SDIO_DTIMER_DATATIME_Pos) /*!< 0xFFFFFFFF */ -#define SDIO_DTIMER_DATATIME SDIO_DTIMER_DATATIME_Msk /*!< Data timeout period. */ - -/****************** Bit definition for SDIO_DLEN register *******************/ -#define SDIO_DLEN_DATALENGTH_Pos (0U) -#define SDIO_DLEN_DATALENGTH_Msk (0x1FFFFFFU << SDIO_DLEN_DATALENGTH_Pos) /*!< 0x01FFFFFF */ -#define SDIO_DLEN_DATALENGTH SDIO_DLEN_DATALENGTH_Msk /*!< Data length value */ - -/****************** Bit definition for SDIO_DCTRL register ******************/ -#define SDIO_DCTRL_DTEN_Pos (0U) -#define SDIO_DCTRL_DTEN_Msk (0x1U << SDIO_DCTRL_DTEN_Pos) /*!< 0x00000001 */ -#define SDIO_DCTRL_DTEN SDIO_DCTRL_DTEN_Msk /*!< Data transfer enabled bit */ -#define SDIO_DCTRL_DTDIR_Pos (1U) -#define SDIO_DCTRL_DTDIR_Msk (0x1U << SDIO_DCTRL_DTDIR_Pos) /*!< 0x00000002 */ -#define SDIO_DCTRL_DTDIR SDIO_DCTRL_DTDIR_Msk /*!< Data transfer direction selection */ -#define SDIO_DCTRL_DTMODE_Pos (2U) -#define SDIO_DCTRL_DTMODE_Msk (0x1U << SDIO_DCTRL_DTMODE_Pos) /*!< 0x00000004 */ -#define SDIO_DCTRL_DTMODE SDIO_DCTRL_DTMODE_Msk /*!< Data transfer mode selection */ -#define SDIO_DCTRL_DMAEN_Pos (3U) -#define SDIO_DCTRL_DMAEN_Msk (0x1U << SDIO_DCTRL_DMAEN_Pos) /*!< 0x00000008 */ -#define SDIO_DCTRL_DMAEN SDIO_DCTRL_DMAEN_Msk /*!< DMA enabled bit */ - -#define SDIO_DCTRL_DBLOCKSIZE_Pos (4U) -#define SDIO_DCTRL_DBLOCKSIZE_Msk (0xFU << SDIO_DCTRL_DBLOCKSIZE_Pos) /*!< 0x000000F0 */ -#define SDIO_DCTRL_DBLOCKSIZE SDIO_DCTRL_DBLOCKSIZE_Msk /*!< DBLOCKSIZE[3:0] bits (Data block size) */ -#define SDIO_DCTRL_DBLOCKSIZE_0 (0x1U << SDIO_DCTRL_DBLOCKSIZE_Pos) /*!< 0x0010 */ -#define SDIO_DCTRL_DBLOCKSIZE_1 (0x2U << SDIO_DCTRL_DBLOCKSIZE_Pos) /*!< 0x0020 */ -#define SDIO_DCTRL_DBLOCKSIZE_2 (0x4U << SDIO_DCTRL_DBLOCKSIZE_Pos) /*!< 0x0040 */ -#define SDIO_DCTRL_DBLOCKSIZE_3 (0x8U << SDIO_DCTRL_DBLOCKSIZE_Pos) /*!< 0x0080 */ - -#define SDIO_DCTRL_RWSTART_Pos (8U) -#define SDIO_DCTRL_RWSTART_Msk (0x1U << SDIO_DCTRL_RWSTART_Pos) /*!< 0x00000100 */ -#define SDIO_DCTRL_RWSTART SDIO_DCTRL_RWSTART_Msk /*!< Read wait start */ -#define SDIO_DCTRL_RWSTOP_Pos (9U) -#define SDIO_DCTRL_RWSTOP_Msk (0x1U << SDIO_DCTRL_RWSTOP_Pos) /*!< 0x00000200 */ -#define SDIO_DCTRL_RWSTOP SDIO_DCTRL_RWSTOP_Msk /*!< Read wait stop */ -#define SDIO_DCTRL_RWMOD_Pos (10U) -#define SDIO_DCTRL_RWMOD_Msk (0x1U << SDIO_DCTRL_RWMOD_Pos) /*!< 0x00000400 */ -#define SDIO_DCTRL_RWMOD SDIO_DCTRL_RWMOD_Msk /*!< Read wait mode */ -#define SDIO_DCTRL_SDIOEN_Pos (11U) -#define SDIO_DCTRL_SDIOEN_Msk (0x1U << SDIO_DCTRL_SDIOEN_Pos) /*!< 0x00000800 */ -#define SDIO_DCTRL_SDIOEN SDIO_DCTRL_SDIOEN_Msk /*!< SD I/O enable functions */ - -/****************** Bit definition for SDIO_DCOUNT register *****************/ -#define SDIO_DCOUNT_DATACOUNT_Pos (0U) -#define SDIO_DCOUNT_DATACOUNT_Msk (0x1FFFFFFU << SDIO_DCOUNT_DATACOUNT_Pos) /*!< 0x01FFFFFF */ -#define SDIO_DCOUNT_DATACOUNT SDIO_DCOUNT_DATACOUNT_Msk /*!< Data count value */ - -/****************** Bit definition for SDIO_STA register ********************/ -#define SDIO_STA_CCRCFAIL_Pos (0U) -#define SDIO_STA_CCRCFAIL_Msk (0x1U << SDIO_STA_CCRCFAIL_Pos) /*!< 0x00000001 */ -#define SDIO_STA_CCRCFAIL SDIO_STA_CCRCFAIL_Msk /*!< Command response received (CRC check failed) */ -#define SDIO_STA_DCRCFAIL_Pos (1U) -#define SDIO_STA_DCRCFAIL_Msk (0x1U << SDIO_STA_DCRCFAIL_Pos) /*!< 0x00000002 */ -#define SDIO_STA_DCRCFAIL SDIO_STA_DCRCFAIL_Msk /*!< Data block sent/received (CRC check failed) */ -#define SDIO_STA_CTIMEOUT_Pos (2U) -#define SDIO_STA_CTIMEOUT_Msk (0x1U << SDIO_STA_CTIMEOUT_Pos) /*!< 0x00000004 */ -#define SDIO_STA_CTIMEOUT SDIO_STA_CTIMEOUT_Msk /*!< Command response timeout */ -#define SDIO_STA_DTIMEOUT_Pos (3U) -#define SDIO_STA_DTIMEOUT_Msk (0x1U << SDIO_STA_DTIMEOUT_Pos) /*!< 0x00000008 */ -#define SDIO_STA_DTIMEOUT SDIO_STA_DTIMEOUT_Msk /*!< Data timeout */ -#define SDIO_STA_TXUNDERR_Pos (4U) -#define SDIO_STA_TXUNDERR_Msk (0x1U << SDIO_STA_TXUNDERR_Pos) /*!< 0x00000010 */ -#define SDIO_STA_TXUNDERR SDIO_STA_TXUNDERR_Msk /*!< Transmit FIFO underrun error */ -#define SDIO_STA_RXOVERR_Pos (5U) -#define SDIO_STA_RXOVERR_Msk (0x1U << SDIO_STA_RXOVERR_Pos) /*!< 0x00000020 */ -#define SDIO_STA_RXOVERR SDIO_STA_RXOVERR_Msk /*!< Received FIFO overrun error */ -#define SDIO_STA_CMDREND_Pos (6U) -#define SDIO_STA_CMDREND_Msk (0x1U << SDIO_STA_CMDREND_Pos) /*!< 0x00000040 */ -#define SDIO_STA_CMDREND SDIO_STA_CMDREND_Msk /*!< Command response received (CRC check passed) */ -#define SDIO_STA_CMDSENT_Pos (7U) -#define SDIO_STA_CMDSENT_Msk (0x1U << SDIO_STA_CMDSENT_Pos) /*!< 0x00000080 */ -#define SDIO_STA_CMDSENT SDIO_STA_CMDSENT_Msk /*!< Command sent (no response required) */ -#define SDIO_STA_DATAEND_Pos (8U) -#define SDIO_STA_DATAEND_Msk (0x1U << SDIO_STA_DATAEND_Pos) /*!< 0x00000100 */ -#define SDIO_STA_DATAEND SDIO_STA_DATAEND_Msk /*!< Data end (data counter, SDIDCOUNT, is zero) */ -#define SDIO_STA_STBITERR_Pos (9U) -#define SDIO_STA_STBITERR_Msk (0x1U << SDIO_STA_STBITERR_Pos) /*!< 0x00000200 */ -#define SDIO_STA_STBITERR SDIO_STA_STBITERR_Msk /*!< Start bit not detected on all data signals in wide bus mode */ -#define SDIO_STA_DBCKEND_Pos (10U) -#define SDIO_STA_DBCKEND_Msk (0x1U << SDIO_STA_DBCKEND_Pos) /*!< 0x00000400 */ -#define SDIO_STA_DBCKEND SDIO_STA_DBCKEND_Msk /*!< Data block sent/received (CRC check passed) */ -#define SDIO_STA_CMDACT_Pos (11U) -#define SDIO_STA_CMDACT_Msk (0x1U << SDIO_STA_CMDACT_Pos) /*!< 0x00000800 */ -#define SDIO_STA_CMDACT SDIO_STA_CMDACT_Msk /*!< Command transfer in progress */ -#define SDIO_STA_TXACT_Pos (12U) -#define SDIO_STA_TXACT_Msk (0x1U << SDIO_STA_TXACT_Pos) /*!< 0x00001000 */ -#define SDIO_STA_TXACT SDIO_STA_TXACT_Msk /*!< Data transmit in progress */ -#define SDIO_STA_RXACT_Pos (13U) -#define SDIO_STA_RXACT_Msk (0x1U << SDIO_STA_RXACT_Pos) /*!< 0x00002000 */ -#define SDIO_STA_RXACT SDIO_STA_RXACT_Msk /*!< Data receive in progress */ -#define SDIO_STA_TXFIFOHE_Pos (14U) -#define SDIO_STA_TXFIFOHE_Msk (0x1U << SDIO_STA_TXFIFOHE_Pos) /*!< 0x00004000 */ -#define SDIO_STA_TXFIFOHE SDIO_STA_TXFIFOHE_Msk /*!< Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */ -#define SDIO_STA_RXFIFOHF_Pos (15U) -#define SDIO_STA_RXFIFOHF_Msk (0x1U << SDIO_STA_RXFIFOHF_Pos) /*!< 0x00008000 */ -#define SDIO_STA_RXFIFOHF SDIO_STA_RXFIFOHF_Msk /*!< Receive FIFO Half Full: there are at least 8 words in the FIFO */ -#define SDIO_STA_TXFIFOF_Pos (16U) -#define SDIO_STA_TXFIFOF_Msk (0x1U << SDIO_STA_TXFIFOF_Pos) /*!< 0x00010000 */ -#define SDIO_STA_TXFIFOF SDIO_STA_TXFIFOF_Msk /*!< Transmit FIFO full */ -#define SDIO_STA_RXFIFOF_Pos (17U) -#define SDIO_STA_RXFIFOF_Msk (0x1U << SDIO_STA_RXFIFOF_Pos) /*!< 0x00020000 */ -#define SDIO_STA_RXFIFOF SDIO_STA_RXFIFOF_Msk /*!< Receive FIFO full */ -#define SDIO_STA_TXFIFOE_Pos (18U) -#define SDIO_STA_TXFIFOE_Msk (0x1U << SDIO_STA_TXFIFOE_Pos) /*!< 0x00040000 */ -#define SDIO_STA_TXFIFOE SDIO_STA_TXFIFOE_Msk /*!< Transmit FIFO empty */ -#define SDIO_STA_RXFIFOE_Pos (19U) -#define SDIO_STA_RXFIFOE_Msk (0x1U << SDIO_STA_RXFIFOE_Pos) /*!< 0x00080000 */ -#define SDIO_STA_RXFIFOE SDIO_STA_RXFIFOE_Msk /*!< Receive FIFO empty */ -#define SDIO_STA_TXDAVL_Pos (20U) -#define SDIO_STA_TXDAVL_Msk (0x1U << SDIO_STA_TXDAVL_Pos) /*!< 0x00100000 */ -#define SDIO_STA_TXDAVL SDIO_STA_TXDAVL_Msk /*!< Data available in transmit FIFO */ -#define SDIO_STA_RXDAVL_Pos (21U) -#define SDIO_STA_RXDAVL_Msk (0x1U << SDIO_STA_RXDAVL_Pos) /*!< 0x00200000 */ -#define SDIO_STA_RXDAVL SDIO_STA_RXDAVL_Msk /*!< Data available in receive FIFO */ -#define SDIO_STA_SDIOIT_Pos (22U) -#define SDIO_STA_SDIOIT_Msk (0x1U << SDIO_STA_SDIOIT_Pos) /*!< 0x00400000 */ -#define SDIO_STA_SDIOIT SDIO_STA_SDIOIT_Msk /*!< SDIO interrupt received */ -#define SDIO_STA_CEATAEND_Pos (23U) -#define SDIO_STA_CEATAEND_Msk (0x1U << SDIO_STA_CEATAEND_Pos) /*!< 0x00800000 */ -#define SDIO_STA_CEATAEND SDIO_STA_CEATAEND_Msk /*!< CE-ATA command completion signal received for CMD61 */ - -/******************* Bit definition for SDIO_ICR register *******************/ -#define SDIO_ICR_CCRCFAILC_Pos (0U) -#define SDIO_ICR_CCRCFAILC_Msk (0x1U << SDIO_ICR_CCRCFAILC_Pos) /*!< 0x00000001 */ -#define SDIO_ICR_CCRCFAILC SDIO_ICR_CCRCFAILC_Msk /*!< CCRCFAIL flag clear bit */ -#define SDIO_ICR_DCRCFAILC_Pos (1U) -#define SDIO_ICR_DCRCFAILC_Msk (0x1U << SDIO_ICR_DCRCFAILC_Pos) /*!< 0x00000002 */ -#define SDIO_ICR_DCRCFAILC SDIO_ICR_DCRCFAILC_Msk /*!< DCRCFAIL flag clear bit */ -#define SDIO_ICR_CTIMEOUTC_Pos (2U) -#define SDIO_ICR_CTIMEOUTC_Msk (0x1U << SDIO_ICR_CTIMEOUTC_Pos) /*!< 0x00000004 */ -#define SDIO_ICR_CTIMEOUTC SDIO_ICR_CTIMEOUTC_Msk /*!< CTIMEOUT flag clear bit */ -#define SDIO_ICR_DTIMEOUTC_Pos (3U) -#define SDIO_ICR_DTIMEOUTC_Msk (0x1U << SDIO_ICR_DTIMEOUTC_Pos) /*!< 0x00000008 */ -#define SDIO_ICR_DTIMEOUTC SDIO_ICR_DTIMEOUTC_Msk /*!< DTIMEOUT flag clear bit */ -#define SDIO_ICR_TXUNDERRC_Pos (4U) -#define SDIO_ICR_TXUNDERRC_Msk (0x1U << SDIO_ICR_TXUNDERRC_Pos) /*!< 0x00000010 */ -#define SDIO_ICR_TXUNDERRC SDIO_ICR_TXUNDERRC_Msk /*!< TXUNDERR flag clear bit */ -#define SDIO_ICR_RXOVERRC_Pos (5U) -#define SDIO_ICR_RXOVERRC_Msk (0x1U << SDIO_ICR_RXOVERRC_Pos) /*!< 0x00000020 */ -#define SDIO_ICR_RXOVERRC SDIO_ICR_RXOVERRC_Msk /*!< RXOVERR flag clear bit */ -#define SDIO_ICR_CMDRENDC_Pos (6U) -#define SDIO_ICR_CMDRENDC_Msk (0x1U << SDIO_ICR_CMDRENDC_Pos) /*!< 0x00000040 */ -#define SDIO_ICR_CMDRENDC SDIO_ICR_CMDRENDC_Msk /*!< CMDREND flag clear bit */ -#define SDIO_ICR_CMDSENTC_Pos (7U) -#define SDIO_ICR_CMDSENTC_Msk (0x1U << SDIO_ICR_CMDSENTC_Pos) /*!< 0x00000080 */ -#define SDIO_ICR_CMDSENTC SDIO_ICR_CMDSENTC_Msk /*!< CMDSENT flag clear bit */ -#define SDIO_ICR_DATAENDC_Pos (8U) -#define SDIO_ICR_DATAENDC_Msk (0x1U << SDIO_ICR_DATAENDC_Pos) /*!< 0x00000100 */ -#define SDIO_ICR_DATAENDC SDIO_ICR_DATAENDC_Msk /*!< DATAEND flag clear bit */ -#define SDIO_ICR_STBITERRC_Pos (9U) -#define SDIO_ICR_STBITERRC_Msk (0x1U << SDIO_ICR_STBITERRC_Pos) /*!< 0x00000200 */ -#define SDIO_ICR_STBITERRC SDIO_ICR_STBITERRC_Msk /*!< STBITERR flag clear bit */ -#define SDIO_ICR_DBCKENDC_Pos (10U) -#define SDIO_ICR_DBCKENDC_Msk (0x1U << SDIO_ICR_DBCKENDC_Pos) /*!< 0x00000400 */ -#define SDIO_ICR_DBCKENDC SDIO_ICR_DBCKENDC_Msk /*!< DBCKEND flag clear bit */ -#define SDIO_ICR_SDIOITC_Pos (22U) -#define SDIO_ICR_SDIOITC_Msk (0x1U << SDIO_ICR_SDIOITC_Pos) /*!< 0x00400000 */ -#define SDIO_ICR_SDIOITC SDIO_ICR_SDIOITC_Msk /*!< SDIOIT flag clear bit */ -#define SDIO_ICR_CEATAENDC_Pos (23U) -#define SDIO_ICR_CEATAENDC_Msk (0x1U << SDIO_ICR_CEATAENDC_Pos) /*!< 0x00800000 */ -#define SDIO_ICR_CEATAENDC SDIO_ICR_CEATAENDC_Msk /*!< CEATAEND flag clear bit */ - -/****************** Bit definition for SDIO_MASK register *******************/ -#define SDIO_MASK_CCRCFAILIE_Pos (0U) -#define SDIO_MASK_CCRCFAILIE_Msk (0x1U << SDIO_MASK_CCRCFAILIE_Pos) /*!< 0x00000001 */ -#define SDIO_MASK_CCRCFAILIE SDIO_MASK_CCRCFAILIE_Msk /*!< Command CRC Fail Interrupt Enable */ -#define SDIO_MASK_DCRCFAILIE_Pos (1U) -#define SDIO_MASK_DCRCFAILIE_Msk (0x1U << SDIO_MASK_DCRCFAILIE_Pos) /*!< 0x00000002 */ -#define SDIO_MASK_DCRCFAILIE SDIO_MASK_DCRCFAILIE_Msk /*!< Data CRC Fail Interrupt Enable */ -#define SDIO_MASK_CTIMEOUTIE_Pos (2U) -#define SDIO_MASK_CTIMEOUTIE_Msk (0x1U << SDIO_MASK_CTIMEOUTIE_Pos) /*!< 0x00000004 */ -#define SDIO_MASK_CTIMEOUTIE SDIO_MASK_CTIMEOUTIE_Msk /*!< Command TimeOut Interrupt Enable */ -#define SDIO_MASK_DTIMEOUTIE_Pos (3U) -#define SDIO_MASK_DTIMEOUTIE_Msk (0x1U << SDIO_MASK_DTIMEOUTIE_Pos) /*!< 0x00000008 */ -#define SDIO_MASK_DTIMEOUTIE SDIO_MASK_DTIMEOUTIE_Msk /*!< Data TimeOut Interrupt Enable */ -#define SDIO_MASK_TXUNDERRIE_Pos (4U) -#define SDIO_MASK_TXUNDERRIE_Msk (0x1U << SDIO_MASK_TXUNDERRIE_Pos) /*!< 0x00000010 */ -#define SDIO_MASK_TXUNDERRIE SDIO_MASK_TXUNDERRIE_Msk /*!< Tx FIFO UnderRun Error Interrupt Enable */ -#define SDIO_MASK_RXOVERRIE_Pos (5U) -#define SDIO_MASK_RXOVERRIE_Msk (0x1U << SDIO_MASK_RXOVERRIE_Pos) /*!< 0x00000020 */ -#define SDIO_MASK_RXOVERRIE SDIO_MASK_RXOVERRIE_Msk /*!< Rx FIFO OverRun Error Interrupt Enable */ -#define SDIO_MASK_CMDRENDIE_Pos (6U) -#define SDIO_MASK_CMDRENDIE_Msk (0x1U << SDIO_MASK_CMDRENDIE_Pos) /*!< 0x00000040 */ -#define SDIO_MASK_CMDRENDIE SDIO_MASK_CMDRENDIE_Msk /*!< Command Response Received Interrupt Enable */ -#define SDIO_MASK_CMDSENTIE_Pos (7U) -#define SDIO_MASK_CMDSENTIE_Msk (0x1U << SDIO_MASK_CMDSENTIE_Pos) /*!< 0x00000080 */ -#define SDIO_MASK_CMDSENTIE SDIO_MASK_CMDSENTIE_Msk /*!< Command Sent Interrupt Enable */ -#define SDIO_MASK_DATAENDIE_Pos (8U) -#define SDIO_MASK_DATAENDIE_Msk (0x1U << SDIO_MASK_DATAENDIE_Pos) /*!< 0x00000100 */ -#define SDIO_MASK_DATAENDIE SDIO_MASK_DATAENDIE_Msk /*!< Data End Interrupt Enable */ -#define SDIO_MASK_STBITERRIE_Pos (9U) -#define SDIO_MASK_STBITERRIE_Msk (0x1U << SDIO_MASK_STBITERRIE_Pos) /*!< 0x00000200 */ -#define SDIO_MASK_STBITERRIE SDIO_MASK_STBITERRIE_Msk /*!< Start Bit Error Interrupt Enable */ -#define SDIO_MASK_DBCKENDIE_Pos (10U) -#define SDIO_MASK_DBCKENDIE_Msk (0x1U << SDIO_MASK_DBCKENDIE_Pos) /*!< 0x00000400 */ -#define SDIO_MASK_DBCKENDIE SDIO_MASK_DBCKENDIE_Msk /*!< Data Block End Interrupt Enable */ -#define SDIO_MASK_CMDACTIE_Pos (11U) -#define SDIO_MASK_CMDACTIE_Msk (0x1U << SDIO_MASK_CMDACTIE_Pos) /*!< 0x00000800 */ -#define SDIO_MASK_CMDACTIE SDIO_MASK_CMDACTIE_Msk /*!< Command Acting Interrupt Enable */ -#define SDIO_MASK_TXACTIE_Pos (12U) -#define SDIO_MASK_TXACTIE_Msk (0x1U << SDIO_MASK_TXACTIE_Pos) /*!< 0x00001000 */ -#define SDIO_MASK_TXACTIE SDIO_MASK_TXACTIE_Msk /*!< Data Transmit Acting Interrupt Enable */ -#define SDIO_MASK_RXACTIE_Pos (13U) -#define SDIO_MASK_RXACTIE_Msk (0x1U << SDIO_MASK_RXACTIE_Pos) /*!< 0x00002000 */ -#define SDIO_MASK_RXACTIE SDIO_MASK_RXACTIE_Msk /*!< Data receive acting interrupt enabled */ -#define SDIO_MASK_TXFIFOHEIE_Pos (14U) -#define SDIO_MASK_TXFIFOHEIE_Msk (0x1U << SDIO_MASK_TXFIFOHEIE_Pos) /*!< 0x00004000 */ -#define SDIO_MASK_TXFIFOHEIE SDIO_MASK_TXFIFOHEIE_Msk /*!< Tx FIFO Half Empty interrupt Enable */ -#define SDIO_MASK_RXFIFOHFIE_Pos (15U) -#define SDIO_MASK_RXFIFOHFIE_Msk (0x1U << SDIO_MASK_RXFIFOHFIE_Pos) /*!< 0x00008000 */ -#define SDIO_MASK_RXFIFOHFIE SDIO_MASK_RXFIFOHFIE_Msk /*!< Rx FIFO Half Full interrupt Enable */ -#define SDIO_MASK_TXFIFOFIE_Pos (16U) -#define SDIO_MASK_TXFIFOFIE_Msk (0x1U << SDIO_MASK_TXFIFOFIE_Pos) /*!< 0x00010000 */ -#define SDIO_MASK_TXFIFOFIE SDIO_MASK_TXFIFOFIE_Msk /*!< Tx FIFO Full interrupt Enable */ -#define SDIO_MASK_RXFIFOFIE_Pos (17U) -#define SDIO_MASK_RXFIFOFIE_Msk (0x1U << SDIO_MASK_RXFIFOFIE_Pos) /*!< 0x00020000 */ -#define SDIO_MASK_RXFIFOFIE SDIO_MASK_RXFIFOFIE_Msk /*!< Rx FIFO Full interrupt Enable */ -#define SDIO_MASK_TXFIFOEIE_Pos (18U) -#define SDIO_MASK_TXFIFOEIE_Msk (0x1U << SDIO_MASK_TXFIFOEIE_Pos) /*!< 0x00040000 */ -#define SDIO_MASK_TXFIFOEIE SDIO_MASK_TXFIFOEIE_Msk /*!< Tx FIFO Empty interrupt Enable */ -#define SDIO_MASK_RXFIFOEIE_Pos (19U) -#define SDIO_MASK_RXFIFOEIE_Msk (0x1U << SDIO_MASK_RXFIFOEIE_Pos) /*!< 0x00080000 */ -#define SDIO_MASK_RXFIFOEIE SDIO_MASK_RXFIFOEIE_Msk /*!< Rx FIFO Empty interrupt Enable */ -#define SDIO_MASK_TXDAVLIE_Pos (20U) -#define SDIO_MASK_TXDAVLIE_Msk (0x1U << SDIO_MASK_TXDAVLIE_Pos) /*!< 0x00100000 */ -#define SDIO_MASK_TXDAVLIE SDIO_MASK_TXDAVLIE_Msk /*!< Data available in Tx FIFO interrupt Enable */ -#define SDIO_MASK_RXDAVLIE_Pos (21U) -#define SDIO_MASK_RXDAVLIE_Msk (0x1U << SDIO_MASK_RXDAVLIE_Pos) /*!< 0x00200000 */ -#define SDIO_MASK_RXDAVLIE SDIO_MASK_RXDAVLIE_Msk /*!< Data available in Rx FIFO interrupt Enable */ -#define SDIO_MASK_SDIOITIE_Pos (22U) -#define SDIO_MASK_SDIOITIE_Msk (0x1U << SDIO_MASK_SDIOITIE_Pos) /*!< 0x00400000 */ -#define SDIO_MASK_SDIOITIE SDIO_MASK_SDIOITIE_Msk /*!< SDIO Mode Interrupt Received interrupt Enable */ -#define SDIO_MASK_CEATAENDIE_Pos (23U) -#define SDIO_MASK_CEATAENDIE_Msk (0x1U << SDIO_MASK_CEATAENDIE_Pos) /*!< 0x00800000 */ -#define SDIO_MASK_CEATAENDIE SDIO_MASK_CEATAENDIE_Msk /*!< CE-ATA command completion signal received Interrupt Enable */ - -/***************** Bit definition for SDIO_FIFOCNT register *****************/ -#define SDIO_FIFOCNT_FIFOCOUNT_Pos (0U) -#define SDIO_FIFOCNT_FIFOCOUNT_Msk (0xFFFFFFU << SDIO_FIFOCNT_FIFOCOUNT_Pos) /*!< 0x00FFFFFF */ -#define SDIO_FIFOCNT_FIFOCOUNT SDIO_FIFOCNT_FIFOCOUNT_Msk /*!< Remaining number of words to be written to or read from the FIFO */ - -/****************** Bit definition for SDIO_FIFO register *******************/ -#define SDIO_FIFO_FIFODATA_Pos (0U) -#define SDIO_FIFO_FIFODATA_Msk (0xFFFFFFFFU << SDIO_FIFO_FIFODATA_Pos) /*!< 0xFFFFFFFF */ -#define SDIO_FIFO_FIFODATA SDIO_FIFO_FIFODATA_Msk /*!< Receive and transmit FIFO data */ - -/******************************************************************************/ -/* */ -/* USB Device FS */ -/* */ -/******************************************************************************/ - -/*!< Endpoint-specific registers */ -#define USB_EP0R USB_BASE /*!< Endpoint 0 register address */ -#define USB_EP1R (USB_BASE + 0x00000004) /*!< Endpoint 1 register address */ -#define USB_EP2R (USB_BASE + 0x00000008) /*!< Endpoint 2 register address */ -#define USB_EP3R (USB_BASE + 0x0000000C) /*!< Endpoint 3 register address */ -#define USB_EP4R (USB_BASE + 0x00000010) /*!< Endpoint 4 register address */ -#define USB_EP5R (USB_BASE + 0x00000014) /*!< Endpoint 5 register address */ -#define USB_EP6R (USB_BASE + 0x00000018) /*!< Endpoint 6 register address */ -#define USB_EP7R (USB_BASE + 0x0000001C) /*!< Endpoint 7 register address */ - -/* bit positions */ -#define USB_EP_CTR_RX_Pos (15U) -#define USB_EP_CTR_RX_Msk (0x1U << USB_EP_CTR_RX_Pos) /*!< 0x00008000 */ -#define USB_EP_CTR_RX USB_EP_CTR_RX_Msk /*!< EndPoint Correct TRansfer RX */ -#define USB_EP_DTOG_RX_Pos (14U) -#define USB_EP_DTOG_RX_Msk (0x1U << USB_EP_DTOG_RX_Pos) /*!< 0x00004000 */ -#define USB_EP_DTOG_RX USB_EP_DTOG_RX_Msk /*!< EndPoint Data TOGGLE RX */ -#define USB_EPRX_STAT_Pos (12U) -#define USB_EPRX_STAT_Msk (0x3U << USB_EPRX_STAT_Pos) /*!< 0x00003000 */ -#define USB_EPRX_STAT USB_EPRX_STAT_Msk /*!< EndPoint RX STATus bit field */ -#define USB_EP_SETUP_Pos (11U) -#define USB_EP_SETUP_Msk (0x1U << USB_EP_SETUP_Pos) /*!< 0x00000800 */ -#define USB_EP_SETUP USB_EP_SETUP_Msk /*!< EndPoint SETUP */ -#define USB_EP_T_FIELD_Pos (9U) -#define USB_EP_T_FIELD_Msk (0x3U << USB_EP_T_FIELD_Pos) /*!< 0x00000600 */ -#define USB_EP_T_FIELD USB_EP_T_FIELD_Msk /*!< EndPoint TYPE */ -#define USB_EP_KIND_Pos (8U) -#define USB_EP_KIND_Msk (0x1U << USB_EP_KIND_Pos) /*!< 0x00000100 */ -#define USB_EP_KIND USB_EP_KIND_Msk /*!< EndPoint KIND */ -#define USB_EP_CTR_TX_Pos (7U) -#define USB_EP_CTR_TX_Msk (0x1U << USB_EP_CTR_TX_Pos) /*!< 0x00000080 */ -#define USB_EP_CTR_TX USB_EP_CTR_TX_Msk /*!< EndPoint Correct TRansfer TX */ -#define USB_EP_DTOG_TX_Pos (6U) -#define USB_EP_DTOG_TX_Msk (0x1U << USB_EP_DTOG_TX_Pos) /*!< 0x00000040 */ -#define USB_EP_DTOG_TX USB_EP_DTOG_TX_Msk /*!< EndPoint Data TOGGLE TX */ -#define USB_EPTX_STAT_Pos (4U) -#define USB_EPTX_STAT_Msk (0x3U << USB_EPTX_STAT_Pos) /*!< 0x00000030 */ -#define USB_EPTX_STAT USB_EPTX_STAT_Msk /*!< EndPoint TX STATus bit field */ -#define USB_EPADDR_FIELD_Pos (0U) -#define USB_EPADDR_FIELD_Msk (0xFU << USB_EPADDR_FIELD_Pos) /*!< 0x0000000F */ -#define USB_EPADDR_FIELD USB_EPADDR_FIELD_Msk /*!< EndPoint ADDRess FIELD */ - -/* EndPoint REGister MASK (no toggle fields) */ -#define USB_EPREG_MASK (USB_EP_CTR_RX|USB_EP_SETUP|USB_EP_T_FIELD|USB_EP_KIND|USB_EP_CTR_TX|USB_EPADDR_FIELD) - /*!< EP_TYPE[1:0] EndPoint TYPE */ -#define USB_EP_TYPE_MASK_Pos (9U) -#define USB_EP_TYPE_MASK_Msk (0x3U << USB_EP_TYPE_MASK_Pos) /*!< 0x00000600 */ -#define USB_EP_TYPE_MASK USB_EP_TYPE_MASK_Msk /*!< EndPoint TYPE Mask */ -#define USB_EP_BULK ((uint32_t)0x00000000) /*!< EndPoint BULK */ -#define USB_EP_CONTROL ((uint32_t)0x00000200) /*!< EndPoint CONTROL */ -#define USB_EP_ISOCHRONOUS ((uint32_t)0x00000400) /*!< EndPoint ISOCHRONOUS */ -#define USB_EP_INTERRUPT ((uint32_t)0x00000600) /*!< EndPoint INTERRUPT */ -#define USB_EP_T_MASK (~USB_EP_T_FIELD & USB_EPREG_MASK) - -#define USB_EPKIND_MASK (~USB_EP_KIND & USB_EPREG_MASK) /*!< EP_KIND EndPoint KIND */ - /*!< STAT_TX[1:0] STATus for TX transfer */ -#define USB_EP_TX_DIS ((uint32_t)0x00000000) /*!< EndPoint TX DISabled */ -#define USB_EP_TX_STALL ((uint32_t)0x00000010) /*!< EndPoint TX STALLed */ -#define USB_EP_TX_NAK ((uint32_t)0x00000020) /*!< EndPoint TX NAKed */ -#define USB_EP_TX_VALID ((uint32_t)0x00000030) /*!< EndPoint TX VALID */ -#define USB_EPTX_DTOG1 ((uint32_t)0x00000010) /*!< EndPoint TX Data TOGgle bit1 */ -#define USB_EPTX_DTOG2 ((uint32_t)0x00000020) /*!< EndPoint TX Data TOGgle bit2 */ -#define USB_EPTX_DTOGMASK (USB_EPTX_STAT|USB_EPREG_MASK) - /*!< STAT_RX[1:0] STATus for RX transfer */ -#define USB_EP_RX_DIS ((uint32_t)0x00000000) /*!< EndPoint RX DISabled */ -#define USB_EP_RX_STALL ((uint32_t)0x00001000) /*!< EndPoint RX STALLed */ -#define USB_EP_RX_NAK ((uint32_t)0x00002000) /*!< EndPoint RX NAKed */ -#define USB_EP_RX_VALID ((uint32_t)0x00003000) /*!< EndPoint RX VALID */ -#define USB_EPRX_DTOG1 ((uint32_t)0x00001000) /*!< EndPoint RX Data TOGgle bit1 */ -#define USB_EPRX_DTOG2 ((uint32_t)0x00002000) /*!< EndPoint RX Data TOGgle bit1 */ -#define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK) - -/******************* Bit definition for USB_EP0R register *******************/ -#define USB_EP0R_EA_Pos (0U) -#define USB_EP0R_EA_Msk (0xFU << USB_EP0R_EA_Pos) /*!< 0x0000000F */ -#define USB_EP0R_EA USB_EP0R_EA_Msk /*!< Endpoint Address */ - -#define USB_EP0R_STAT_TX_Pos (4U) -#define USB_EP0R_STAT_TX_Msk (0x3U << USB_EP0R_STAT_TX_Pos) /*!< 0x00000030 */ -#define USB_EP0R_STAT_TX USB_EP0R_STAT_TX_Msk /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP0R_STAT_TX_0 (0x1U << USB_EP0R_STAT_TX_Pos) /*!< 0x00000010 */ -#define USB_EP0R_STAT_TX_1 (0x2U << USB_EP0R_STAT_TX_Pos) /*!< 0x00000020 */ - -#define USB_EP0R_DTOG_TX_Pos (6U) -#define USB_EP0R_DTOG_TX_Msk (0x1U << USB_EP0R_DTOG_TX_Pos) /*!< 0x00000040 */ -#define USB_EP0R_DTOG_TX USB_EP0R_DTOG_TX_Msk /*!< Data Toggle, for transmission transfers */ -#define USB_EP0R_CTR_TX_Pos (7U) -#define USB_EP0R_CTR_TX_Msk (0x1U << USB_EP0R_CTR_TX_Pos) /*!< 0x00000080 */ -#define USB_EP0R_CTR_TX USB_EP0R_CTR_TX_Msk /*!< Correct Transfer for transmission */ -#define USB_EP0R_EP_KIND_Pos (8U) -#define USB_EP0R_EP_KIND_Msk (0x1U << USB_EP0R_EP_KIND_Pos) /*!< 0x00000100 */ -#define USB_EP0R_EP_KIND USB_EP0R_EP_KIND_Msk /*!< Endpoint Kind */ - -#define USB_EP0R_EP_TYPE_Pos (9U) -#define USB_EP0R_EP_TYPE_Msk (0x3U << USB_EP0R_EP_TYPE_Pos) /*!< 0x00000600 */ -#define USB_EP0R_EP_TYPE USB_EP0R_EP_TYPE_Msk /*!< EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP0R_EP_TYPE_0 (0x1U << USB_EP0R_EP_TYPE_Pos) /*!< 0x00000200 */ -#define USB_EP0R_EP_TYPE_1 (0x2U << USB_EP0R_EP_TYPE_Pos) /*!< 0x00000400 */ - -#define USB_EP0R_SETUP_Pos (11U) -#define USB_EP0R_SETUP_Msk (0x1U << USB_EP0R_SETUP_Pos) /*!< 0x00000800 */ -#define USB_EP0R_SETUP USB_EP0R_SETUP_Msk /*!< Setup transaction completed */ - -#define USB_EP0R_STAT_RX_Pos (12U) -#define USB_EP0R_STAT_RX_Msk (0x3U << USB_EP0R_STAT_RX_Pos) /*!< 0x00003000 */ -#define USB_EP0R_STAT_RX USB_EP0R_STAT_RX_Msk /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP0R_STAT_RX_0 (0x1U << USB_EP0R_STAT_RX_Pos) /*!< 0x00001000 */ -#define USB_EP0R_STAT_RX_1 (0x2U << USB_EP0R_STAT_RX_Pos) /*!< 0x00002000 */ - -#define USB_EP0R_DTOG_RX_Pos (14U) -#define USB_EP0R_DTOG_RX_Msk (0x1U << USB_EP0R_DTOG_RX_Pos) /*!< 0x00004000 */ -#define USB_EP0R_DTOG_RX USB_EP0R_DTOG_RX_Msk /*!< Data Toggle, for reception transfers */ -#define USB_EP0R_CTR_RX_Pos (15U) -#define USB_EP0R_CTR_RX_Msk (0x1U << USB_EP0R_CTR_RX_Pos) /*!< 0x00008000 */ -#define USB_EP0R_CTR_RX USB_EP0R_CTR_RX_Msk /*!< Correct Transfer for reception */ - -/******************* Bit definition for USB_EP1R register *******************/ -#define USB_EP1R_EA_Pos (0U) -#define USB_EP1R_EA_Msk (0xFU << USB_EP1R_EA_Pos) /*!< 0x0000000F */ -#define USB_EP1R_EA USB_EP1R_EA_Msk /*!< Endpoint Address */ - -#define USB_EP1R_STAT_TX_Pos (4U) -#define USB_EP1R_STAT_TX_Msk (0x3U << USB_EP1R_STAT_TX_Pos) /*!< 0x00000030 */ -#define USB_EP1R_STAT_TX USB_EP1R_STAT_TX_Msk /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP1R_STAT_TX_0 (0x1U << USB_EP1R_STAT_TX_Pos) /*!< 0x00000010 */ -#define USB_EP1R_STAT_TX_1 (0x2U << USB_EP1R_STAT_TX_Pos) /*!< 0x00000020 */ - -#define USB_EP1R_DTOG_TX_Pos (6U) -#define USB_EP1R_DTOG_TX_Msk (0x1U << USB_EP1R_DTOG_TX_Pos) /*!< 0x00000040 */ -#define USB_EP1R_DTOG_TX USB_EP1R_DTOG_TX_Msk /*!< Data Toggle, for transmission transfers */ -#define USB_EP1R_CTR_TX_Pos (7U) -#define USB_EP1R_CTR_TX_Msk (0x1U << USB_EP1R_CTR_TX_Pos) /*!< 0x00000080 */ -#define USB_EP1R_CTR_TX USB_EP1R_CTR_TX_Msk /*!< Correct Transfer for transmission */ -#define USB_EP1R_EP_KIND_Pos (8U) -#define USB_EP1R_EP_KIND_Msk (0x1U << USB_EP1R_EP_KIND_Pos) /*!< 0x00000100 */ -#define USB_EP1R_EP_KIND USB_EP1R_EP_KIND_Msk /*!< Endpoint Kind */ - -#define USB_EP1R_EP_TYPE_Pos (9U) -#define USB_EP1R_EP_TYPE_Msk (0x3U << USB_EP1R_EP_TYPE_Pos) /*!< 0x00000600 */ -#define USB_EP1R_EP_TYPE USB_EP1R_EP_TYPE_Msk /*!< EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP1R_EP_TYPE_0 (0x1U << USB_EP1R_EP_TYPE_Pos) /*!< 0x00000200 */ -#define USB_EP1R_EP_TYPE_1 (0x2U << USB_EP1R_EP_TYPE_Pos) /*!< 0x00000400 */ - -#define USB_EP1R_SETUP_Pos (11U) -#define USB_EP1R_SETUP_Msk (0x1U << USB_EP1R_SETUP_Pos) /*!< 0x00000800 */ -#define USB_EP1R_SETUP USB_EP1R_SETUP_Msk /*!< Setup transaction completed */ - -#define USB_EP1R_STAT_RX_Pos (12U) -#define USB_EP1R_STAT_RX_Msk (0x3U << USB_EP1R_STAT_RX_Pos) /*!< 0x00003000 */ -#define USB_EP1R_STAT_RX USB_EP1R_STAT_RX_Msk /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP1R_STAT_RX_0 (0x1U << USB_EP1R_STAT_RX_Pos) /*!< 0x00001000 */ -#define USB_EP1R_STAT_RX_1 (0x2U << USB_EP1R_STAT_RX_Pos) /*!< 0x00002000 */ - -#define USB_EP1R_DTOG_RX_Pos (14U) -#define USB_EP1R_DTOG_RX_Msk (0x1U << USB_EP1R_DTOG_RX_Pos) /*!< 0x00004000 */ -#define USB_EP1R_DTOG_RX USB_EP1R_DTOG_RX_Msk /*!< Data Toggle, for reception transfers */ -#define USB_EP1R_CTR_RX_Pos (15U) -#define USB_EP1R_CTR_RX_Msk (0x1U << USB_EP1R_CTR_RX_Pos) /*!< 0x00008000 */ -#define USB_EP1R_CTR_RX USB_EP1R_CTR_RX_Msk /*!< Correct Transfer for reception */ - -/******************* Bit definition for USB_EP2R register *******************/ -#define USB_EP2R_EA_Pos (0U) -#define USB_EP2R_EA_Msk (0xFU << USB_EP2R_EA_Pos) /*!< 0x0000000F */ -#define USB_EP2R_EA USB_EP2R_EA_Msk /*!< Endpoint Address */ - -#define USB_EP2R_STAT_TX_Pos (4U) -#define USB_EP2R_STAT_TX_Msk (0x3U << USB_EP2R_STAT_TX_Pos) /*!< 0x00000030 */ -#define USB_EP2R_STAT_TX USB_EP2R_STAT_TX_Msk /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP2R_STAT_TX_0 (0x1U << USB_EP2R_STAT_TX_Pos) /*!< 0x00000010 */ -#define USB_EP2R_STAT_TX_1 (0x2U << USB_EP2R_STAT_TX_Pos) /*!< 0x00000020 */ - -#define USB_EP2R_DTOG_TX_Pos (6U) -#define USB_EP2R_DTOG_TX_Msk (0x1U << USB_EP2R_DTOG_TX_Pos) /*!< 0x00000040 */ -#define USB_EP2R_DTOG_TX USB_EP2R_DTOG_TX_Msk /*!< Data Toggle, for transmission transfers */ -#define USB_EP2R_CTR_TX_Pos (7U) -#define USB_EP2R_CTR_TX_Msk (0x1U << USB_EP2R_CTR_TX_Pos) /*!< 0x00000080 */ -#define USB_EP2R_CTR_TX USB_EP2R_CTR_TX_Msk /*!< Correct Transfer for transmission */ -#define USB_EP2R_EP_KIND_Pos (8U) -#define USB_EP2R_EP_KIND_Msk (0x1U << USB_EP2R_EP_KIND_Pos) /*!< 0x00000100 */ -#define USB_EP2R_EP_KIND USB_EP2R_EP_KIND_Msk /*!< Endpoint Kind */ - -#define USB_EP2R_EP_TYPE_Pos (9U) -#define USB_EP2R_EP_TYPE_Msk (0x3U << USB_EP2R_EP_TYPE_Pos) /*!< 0x00000600 */ -#define USB_EP2R_EP_TYPE USB_EP2R_EP_TYPE_Msk /*!< EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP2R_EP_TYPE_0 (0x1U << USB_EP2R_EP_TYPE_Pos) /*!< 0x00000200 */ -#define USB_EP2R_EP_TYPE_1 (0x2U << USB_EP2R_EP_TYPE_Pos) /*!< 0x00000400 */ - -#define USB_EP2R_SETUP_Pos (11U) -#define USB_EP2R_SETUP_Msk (0x1U << USB_EP2R_SETUP_Pos) /*!< 0x00000800 */ -#define USB_EP2R_SETUP USB_EP2R_SETUP_Msk /*!< Setup transaction completed */ - -#define USB_EP2R_STAT_RX_Pos (12U) -#define USB_EP2R_STAT_RX_Msk (0x3U << USB_EP2R_STAT_RX_Pos) /*!< 0x00003000 */ -#define USB_EP2R_STAT_RX USB_EP2R_STAT_RX_Msk /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP2R_STAT_RX_0 (0x1U << USB_EP2R_STAT_RX_Pos) /*!< 0x00001000 */ -#define USB_EP2R_STAT_RX_1 (0x2U << USB_EP2R_STAT_RX_Pos) /*!< 0x00002000 */ - -#define USB_EP2R_DTOG_RX_Pos (14U) -#define USB_EP2R_DTOG_RX_Msk (0x1U << USB_EP2R_DTOG_RX_Pos) /*!< 0x00004000 */ -#define USB_EP2R_DTOG_RX USB_EP2R_DTOG_RX_Msk /*!< Data Toggle, for reception transfers */ -#define USB_EP2R_CTR_RX_Pos (15U) -#define USB_EP2R_CTR_RX_Msk (0x1U << USB_EP2R_CTR_RX_Pos) /*!< 0x00008000 */ -#define USB_EP2R_CTR_RX USB_EP2R_CTR_RX_Msk /*!< Correct Transfer for reception */ - -/******************* Bit definition for USB_EP3R register *******************/ -#define USB_EP3R_EA_Pos (0U) -#define USB_EP3R_EA_Msk (0xFU << USB_EP3R_EA_Pos) /*!< 0x0000000F */ -#define USB_EP3R_EA USB_EP3R_EA_Msk /*!< Endpoint Address */ - -#define USB_EP3R_STAT_TX_Pos (4U) -#define USB_EP3R_STAT_TX_Msk (0x3U << USB_EP3R_STAT_TX_Pos) /*!< 0x00000030 */ -#define USB_EP3R_STAT_TX USB_EP3R_STAT_TX_Msk /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP3R_STAT_TX_0 (0x1U << USB_EP3R_STAT_TX_Pos) /*!< 0x00000010 */ -#define USB_EP3R_STAT_TX_1 (0x2U << USB_EP3R_STAT_TX_Pos) /*!< 0x00000020 */ - -#define USB_EP3R_DTOG_TX_Pos (6U) -#define USB_EP3R_DTOG_TX_Msk (0x1U << USB_EP3R_DTOG_TX_Pos) /*!< 0x00000040 */ -#define USB_EP3R_DTOG_TX USB_EP3R_DTOG_TX_Msk /*!< Data Toggle, for transmission transfers */ -#define USB_EP3R_CTR_TX_Pos (7U) -#define USB_EP3R_CTR_TX_Msk (0x1U << USB_EP3R_CTR_TX_Pos) /*!< 0x00000080 */ -#define USB_EP3R_CTR_TX USB_EP3R_CTR_TX_Msk /*!< Correct Transfer for transmission */ -#define USB_EP3R_EP_KIND_Pos (8U) -#define USB_EP3R_EP_KIND_Msk (0x1U << USB_EP3R_EP_KIND_Pos) /*!< 0x00000100 */ -#define USB_EP3R_EP_KIND USB_EP3R_EP_KIND_Msk /*!< Endpoint Kind */ - -#define USB_EP3R_EP_TYPE_Pos (9U) -#define USB_EP3R_EP_TYPE_Msk (0x3U << USB_EP3R_EP_TYPE_Pos) /*!< 0x00000600 */ -#define USB_EP3R_EP_TYPE USB_EP3R_EP_TYPE_Msk /*!< EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP3R_EP_TYPE_0 (0x1U << USB_EP3R_EP_TYPE_Pos) /*!< 0x00000200 */ -#define USB_EP3R_EP_TYPE_1 (0x2U << USB_EP3R_EP_TYPE_Pos) /*!< 0x00000400 */ - -#define USB_EP3R_SETUP_Pos (11U) -#define USB_EP3R_SETUP_Msk (0x1U << USB_EP3R_SETUP_Pos) /*!< 0x00000800 */ -#define USB_EP3R_SETUP USB_EP3R_SETUP_Msk /*!< Setup transaction completed */ - -#define USB_EP3R_STAT_RX_Pos (12U) -#define USB_EP3R_STAT_RX_Msk (0x3U << USB_EP3R_STAT_RX_Pos) /*!< 0x00003000 */ -#define USB_EP3R_STAT_RX USB_EP3R_STAT_RX_Msk /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP3R_STAT_RX_0 (0x1U << USB_EP3R_STAT_RX_Pos) /*!< 0x00001000 */ -#define USB_EP3R_STAT_RX_1 (0x2U << USB_EP3R_STAT_RX_Pos) /*!< 0x00002000 */ - -#define USB_EP3R_DTOG_RX_Pos (14U) -#define USB_EP3R_DTOG_RX_Msk (0x1U << USB_EP3R_DTOG_RX_Pos) /*!< 0x00004000 */ -#define USB_EP3R_DTOG_RX USB_EP3R_DTOG_RX_Msk /*!< Data Toggle, for reception transfers */ -#define USB_EP3R_CTR_RX_Pos (15U) -#define USB_EP3R_CTR_RX_Msk (0x1U << USB_EP3R_CTR_RX_Pos) /*!< 0x00008000 */ -#define USB_EP3R_CTR_RX USB_EP3R_CTR_RX_Msk /*!< Correct Transfer for reception */ - -/******************* Bit definition for USB_EP4R register *******************/ -#define USB_EP4R_EA_Pos (0U) -#define USB_EP4R_EA_Msk (0xFU << USB_EP4R_EA_Pos) /*!< 0x0000000F */ -#define USB_EP4R_EA USB_EP4R_EA_Msk /*!< Endpoint Address */ - -#define USB_EP4R_STAT_TX_Pos (4U) -#define USB_EP4R_STAT_TX_Msk (0x3U << USB_EP4R_STAT_TX_Pos) /*!< 0x00000030 */ -#define USB_EP4R_STAT_TX USB_EP4R_STAT_TX_Msk /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP4R_STAT_TX_0 (0x1U << USB_EP4R_STAT_TX_Pos) /*!< 0x00000010 */ -#define USB_EP4R_STAT_TX_1 (0x2U << USB_EP4R_STAT_TX_Pos) /*!< 0x00000020 */ - -#define USB_EP4R_DTOG_TX_Pos (6U) -#define USB_EP4R_DTOG_TX_Msk (0x1U << USB_EP4R_DTOG_TX_Pos) /*!< 0x00000040 */ -#define USB_EP4R_DTOG_TX USB_EP4R_DTOG_TX_Msk /*!< Data Toggle, for transmission transfers */ -#define USB_EP4R_CTR_TX_Pos (7U) -#define USB_EP4R_CTR_TX_Msk (0x1U << USB_EP4R_CTR_TX_Pos) /*!< 0x00000080 */ -#define USB_EP4R_CTR_TX USB_EP4R_CTR_TX_Msk /*!< Correct Transfer for transmission */ -#define USB_EP4R_EP_KIND_Pos (8U) -#define USB_EP4R_EP_KIND_Msk (0x1U << USB_EP4R_EP_KIND_Pos) /*!< 0x00000100 */ -#define USB_EP4R_EP_KIND USB_EP4R_EP_KIND_Msk /*!< Endpoint Kind */ - -#define USB_EP4R_EP_TYPE_Pos (9U) -#define USB_EP4R_EP_TYPE_Msk (0x3U << USB_EP4R_EP_TYPE_Pos) /*!< 0x00000600 */ -#define USB_EP4R_EP_TYPE USB_EP4R_EP_TYPE_Msk /*!< EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP4R_EP_TYPE_0 (0x1U << USB_EP4R_EP_TYPE_Pos) /*!< 0x00000200 */ -#define USB_EP4R_EP_TYPE_1 (0x2U << USB_EP4R_EP_TYPE_Pos) /*!< 0x00000400 */ - -#define USB_EP4R_SETUP_Pos (11U) -#define USB_EP4R_SETUP_Msk (0x1U << USB_EP4R_SETUP_Pos) /*!< 0x00000800 */ -#define USB_EP4R_SETUP USB_EP4R_SETUP_Msk /*!< Setup transaction completed */ - -#define USB_EP4R_STAT_RX_Pos (12U) -#define USB_EP4R_STAT_RX_Msk (0x3U << USB_EP4R_STAT_RX_Pos) /*!< 0x00003000 */ -#define USB_EP4R_STAT_RX USB_EP4R_STAT_RX_Msk /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP4R_STAT_RX_0 (0x1U << USB_EP4R_STAT_RX_Pos) /*!< 0x00001000 */ -#define USB_EP4R_STAT_RX_1 (0x2U << USB_EP4R_STAT_RX_Pos) /*!< 0x00002000 */ - -#define USB_EP4R_DTOG_RX_Pos (14U) -#define USB_EP4R_DTOG_RX_Msk (0x1U << USB_EP4R_DTOG_RX_Pos) /*!< 0x00004000 */ -#define USB_EP4R_DTOG_RX USB_EP4R_DTOG_RX_Msk /*!< Data Toggle, for reception transfers */ -#define USB_EP4R_CTR_RX_Pos (15U) -#define USB_EP4R_CTR_RX_Msk (0x1U << USB_EP4R_CTR_RX_Pos) /*!< 0x00008000 */ -#define USB_EP4R_CTR_RX USB_EP4R_CTR_RX_Msk /*!< Correct Transfer for reception */ - -/******************* Bit definition for USB_EP5R register *******************/ -#define USB_EP5R_EA_Pos (0U) -#define USB_EP5R_EA_Msk (0xFU << USB_EP5R_EA_Pos) /*!< 0x0000000F */ -#define USB_EP5R_EA USB_EP5R_EA_Msk /*!< Endpoint Address */ - -#define USB_EP5R_STAT_TX_Pos (4U) -#define USB_EP5R_STAT_TX_Msk (0x3U << USB_EP5R_STAT_TX_Pos) /*!< 0x00000030 */ -#define USB_EP5R_STAT_TX USB_EP5R_STAT_TX_Msk /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP5R_STAT_TX_0 (0x1U << USB_EP5R_STAT_TX_Pos) /*!< 0x00000010 */ -#define USB_EP5R_STAT_TX_1 (0x2U << USB_EP5R_STAT_TX_Pos) /*!< 0x00000020 */ - -#define USB_EP5R_DTOG_TX_Pos (6U) -#define USB_EP5R_DTOG_TX_Msk (0x1U << USB_EP5R_DTOG_TX_Pos) /*!< 0x00000040 */ -#define USB_EP5R_DTOG_TX USB_EP5R_DTOG_TX_Msk /*!< Data Toggle, for transmission transfers */ -#define USB_EP5R_CTR_TX_Pos (7U) -#define USB_EP5R_CTR_TX_Msk (0x1U << USB_EP5R_CTR_TX_Pos) /*!< 0x00000080 */ -#define USB_EP5R_CTR_TX USB_EP5R_CTR_TX_Msk /*!< Correct Transfer for transmission */ -#define USB_EP5R_EP_KIND_Pos (8U) -#define USB_EP5R_EP_KIND_Msk (0x1U << USB_EP5R_EP_KIND_Pos) /*!< 0x00000100 */ -#define USB_EP5R_EP_KIND USB_EP5R_EP_KIND_Msk /*!< Endpoint Kind */ - -#define USB_EP5R_EP_TYPE_Pos (9U) -#define USB_EP5R_EP_TYPE_Msk (0x3U << USB_EP5R_EP_TYPE_Pos) /*!< 0x00000600 */ -#define USB_EP5R_EP_TYPE USB_EP5R_EP_TYPE_Msk /*!< EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP5R_EP_TYPE_0 (0x1U << USB_EP5R_EP_TYPE_Pos) /*!< 0x00000200 */ -#define USB_EP5R_EP_TYPE_1 (0x2U << USB_EP5R_EP_TYPE_Pos) /*!< 0x00000400 */ - -#define USB_EP5R_SETUP_Pos (11U) -#define USB_EP5R_SETUP_Msk (0x1U << USB_EP5R_SETUP_Pos) /*!< 0x00000800 */ -#define USB_EP5R_SETUP USB_EP5R_SETUP_Msk /*!< Setup transaction completed */ - -#define USB_EP5R_STAT_RX_Pos (12U) -#define USB_EP5R_STAT_RX_Msk (0x3U << USB_EP5R_STAT_RX_Pos) /*!< 0x00003000 */ -#define USB_EP5R_STAT_RX USB_EP5R_STAT_RX_Msk /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP5R_STAT_RX_0 (0x1U << USB_EP5R_STAT_RX_Pos) /*!< 0x00001000 */ -#define USB_EP5R_STAT_RX_1 (0x2U << USB_EP5R_STAT_RX_Pos) /*!< 0x00002000 */ - -#define USB_EP5R_DTOG_RX_Pos (14U) -#define USB_EP5R_DTOG_RX_Msk (0x1U << USB_EP5R_DTOG_RX_Pos) /*!< 0x00004000 */ -#define USB_EP5R_DTOG_RX USB_EP5R_DTOG_RX_Msk /*!< Data Toggle, for reception transfers */ -#define USB_EP5R_CTR_RX_Pos (15U) -#define USB_EP5R_CTR_RX_Msk (0x1U << USB_EP5R_CTR_RX_Pos) /*!< 0x00008000 */ -#define USB_EP5R_CTR_RX USB_EP5R_CTR_RX_Msk /*!< Correct Transfer for reception */ - -/******************* Bit definition for USB_EP6R register *******************/ -#define USB_EP6R_EA_Pos (0U) -#define USB_EP6R_EA_Msk (0xFU << USB_EP6R_EA_Pos) /*!< 0x0000000F */ -#define USB_EP6R_EA USB_EP6R_EA_Msk /*!< Endpoint Address */ - -#define USB_EP6R_STAT_TX_Pos (4U) -#define USB_EP6R_STAT_TX_Msk (0x3U << USB_EP6R_STAT_TX_Pos) /*!< 0x00000030 */ -#define USB_EP6R_STAT_TX USB_EP6R_STAT_TX_Msk /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP6R_STAT_TX_0 (0x1U << USB_EP6R_STAT_TX_Pos) /*!< 0x00000010 */ -#define USB_EP6R_STAT_TX_1 (0x2U << USB_EP6R_STAT_TX_Pos) /*!< 0x00000020 */ - -#define USB_EP6R_DTOG_TX_Pos (6U) -#define USB_EP6R_DTOG_TX_Msk (0x1U << USB_EP6R_DTOG_TX_Pos) /*!< 0x00000040 */ -#define USB_EP6R_DTOG_TX USB_EP6R_DTOG_TX_Msk /*!< Data Toggle, for transmission transfers */ -#define USB_EP6R_CTR_TX_Pos (7U) -#define USB_EP6R_CTR_TX_Msk (0x1U << USB_EP6R_CTR_TX_Pos) /*!< 0x00000080 */ -#define USB_EP6R_CTR_TX USB_EP6R_CTR_TX_Msk /*!< Correct Transfer for transmission */ -#define USB_EP6R_EP_KIND_Pos (8U) -#define USB_EP6R_EP_KIND_Msk (0x1U << USB_EP6R_EP_KIND_Pos) /*!< 0x00000100 */ -#define USB_EP6R_EP_KIND USB_EP6R_EP_KIND_Msk /*!< Endpoint Kind */ - -#define USB_EP6R_EP_TYPE_Pos (9U) -#define USB_EP6R_EP_TYPE_Msk (0x3U << USB_EP6R_EP_TYPE_Pos) /*!< 0x00000600 */ -#define USB_EP6R_EP_TYPE USB_EP6R_EP_TYPE_Msk /*!< EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP6R_EP_TYPE_0 (0x1U << USB_EP6R_EP_TYPE_Pos) /*!< 0x00000200 */ -#define USB_EP6R_EP_TYPE_1 (0x2U << USB_EP6R_EP_TYPE_Pos) /*!< 0x00000400 */ - -#define USB_EP6R_SETUP_Pos (11U) -#define USB_EP6R_SETUP_Msk (0x1U << USB_EP6R_SETUP_Pos) /*!< 0x00000800 */ -#define USB_EP6R_SETUP USB_EP6R_SETUP_Msk /*!< Setup transaction completed */ - -#define USB_EP6R_STAT_RX_Pos (12U) -#define USB_EP6R_STAT_RX_Msk (0x3U << USB_EP6R_STAT_RX_Pos) /*!< 0x00003000 */ -#define USB_EP6R_STAT_RX USB_EP6R_STAT_RX_Msk /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP6R_STAT_RX_0 (0x1U << USB_EP6R_STAT_RX_Pos) /*!< 0x00001000 */ -#define USB_EP6R_STAT_RX_1 (0x2U << USB_EP6R_STAT_RX_Pos) /*!< 0x00002000 */ - -#define USB_EP6R_DTOG_RX_Pos (14U) -#define USB_EP6R_DTOG_RX_Msk (0x1U << USB_EP6R_DTOG_RX_Pos) /*!< 0x00004000 */ -#define USB_EP6R_DTOG_RX USB_EP6R_DTOG_RX_Msk /*!< Data Toggle, for reception transfers */ -#define USB_EP6R_CTR_RX_Pos (15U) -#define USB_EP6R_CTR_RX_Msk (0x1U << USB_EP6R_CTR_RX_Pos) /*!< 0x00008000 */ -#define USB_EP6R_CTR_RX USB_EP6R_CTR_RX_Msk /*!< Correct Transfer for reception */ - -/******************* Bit definition for USB_EP7R register *******************/ -#define USB_EP7R_EA_Pos (0U) -#define USB_EP7R_EA_Msk (0xFU << USB_EP7R_EA_Pos) /*!< 0x0000000F */ -#define USB_EP7R_EA USB_EP7R_EA_Msk /*!< Endpoint Address */ - -#define USB_EP7R_STAT_TX_Pos (4U) -#define USB_EP7R_STAT_TX_Msk (0x3U << USB_EP7R_STAT_TX_Pos) /*!< 0x00000030 */ -#define USB_EP7R_STAT_TX USB_EP7R_STAT_TX_Msk /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP7R_STAT_TX_0 (0x1U << USB_EP7R_STAT_TX_Pos) /*!< 0x00000010 */ -#define USB_EP7R_STAT_TX_1 (0x2U << USB_EP7R_STAT_TX_Pos) /*!< 0x00000020 */ - -#define USB_EP7R_DTOG_TX_Pos (6U) -#define USB_EP7R_DTOG_TX_Msk (0x1U << USB_EP7R_DTOG_TX_Pos) /*!< 0x00000040 */ -#define USB_EP7R_DTOG_TX USB_EP7R_DTOG_TX_Msk /*!< Data Toggle, for transmission transfers */ -#define USB_EP7R_CTR_TX_Pos (7U) -#define USB_EP7R_CTR_TX_Msk (0x1U << USB_EP7R_CTR_TX_Pos) /*!< 0x00000080 */ -#define USB_EP7R_CTR_TX USB_EP7R_CTR_TX_Msk /*!< Correct Transfer for transmission */ -#define USB_EP7R_EP_KIND_Pos (8U) -#define USB_EP7R_EP_KIND_Msk (0x1U << USB_EP7R_EP_KIND_Pos) /*!< 0x00000100 */ -#define USB_EP7R_EP_KIND USB_EP7R_EP_KIND_Msk /*!< Endpoint Kind */ - -#define USB_EP7R_EP_TYPE_Pos (9U) -#define USB_EP7R_EP_TYPE_Msk (0x3U << USB_EP7R_EP_TYPE_Pos) /*!< 0x00000600 */ -#define USB_EP7R_EP_TYPE USB_EP7R_EP_TYPE_Msk /*!< EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP7R_EP_TYPE_0 (0x1U << USB_EP7R_EP_TYPE_Pos) /*!< 0x00000200 */ -#define USB_EP7R_EP_TYPE_1 (0x2U << USB_EP7R_EP_TYPE_Pos) /*!< 0x00000400 */ - -#define USB_EP7R_SETUP_Pos (11U) -#define USB_EP7R_SETUP_Msk (0x1U << USB_EP7R_SETUP_Pos) /*!< 0x00000800 */ -#define USB_EP7R_SETUP USB_EP7R_SETUP_Msk /*!< Setup transaction completed */ - -#define USB_EP7R_STAT_RX_Pos (12U) -#define USB_EP7R_STAT_RX_Msk (0x3U << USB_EP7R_STAT_RX_Pos) /*!< 0x00003000 */ -#define USB_EP7R_STAT_RX USB_EP7R_STAT_RX_Msk /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP7R_STAT_RX_0 (0x1U << USB_EP7R_STAT_RX_Pos) /*!< 0x00001000 */ -#define USB_EP7R_STAT_RX_1 (0x2U << USB_EP7R_STAT_RX_Pos) /*!< 0x00002000 */ - -#define USB_EP7R_DTOG_RX_Pos (14U) -#define USB_EP7R_DTOG_RX_Msk (0x1U << USB_EP7R_DTOG_RX_Pos) /*!< 0x00004000 */ -#define USB_EP7R_DTOG_RX USB_EP7R_DTOG_RX_Msk /*!< Data Toggle, for reception transfers */ -#define USB_EP7R_CTR_RX_Pos (15U) -#define USB_EP7R_CTR_RX_Msk (0x1U << USB_EP7R_CTR_RX_Pos) /*!< 0x00008000 */ -#define USB_EP7R_CTR_RX USB_EP7R_CTR_RX_Msk /*!< Correct Transfer for reception */ - -/*!< Common registers */ -/******************* Bit definition for USB_CNTR register *******************/ -#define USB_CNTR_FRES_Pos (0U) -#define USB_CNTR_FRES_Msk (0x1U << USB_CNTR_FRES_Pos) /*!< 0x00000001 */ -#define USB_CNTR_FRES USB_CNTR_FRES_Msk /*!< Force USB Reset */ -#define USB_CNTR_PDWN_Pos (1U) -#define USB_CNTR_PDWN_Msk (0x1U << USB_CNTR_PDWN_Pos) /*!< 0x00000002 */ -#define USB_CNTR_PDWN USB_CNTR_PDWN_Msk /*!< Power down */ -#define USB_CNTR_LP_MODE_Pos (2U) -#define USB_CNTR_LP_MODE_Msk (0x1U << USB_CNTR_LP_MODE_Pos) /*!< 0x00000004 */ -#define USB_CNTR_LP_MODE USB_CNTR_LP_MODE_Msk /*!< Low-power mode */ -#define USB_CNTR_FSUSP_Pos (3U) -#define USB_CNTR_FSUSP_Msk (0x1U << USB_CNTR_FSUSP_Pos) /*!< 0x00000008 */ -#define USB_CNTR_FSUSP USB_CNTR_FSUSP_Msk /*!< Force suspend */ -#define USB_CNTR_RESUME_Pos (4U) -#define USB_CNTR_RESUME_Msk (0x1U << USB_CNTR_RESUME_Pos) /*!< 0x00000010 */ -#define USB_CNTR_RESUME USB_CNTR_RESUME_Msk /*!< Resume request */ -#define USB_CNTR_ESOFM_Pos (8U) -#define USB_CNTR_ESOFM_Msk (0x1U << USB_CNTR_ESOFM_Pos) /*!< 0x00000100 */ -#define USB_CNTR_ESOFM USB_CNTR_ESOFM_Msk /*!< Expected Start Of Frame Interrupt Mask */ -#define USB_CNTR_SOFM_Pos (9U) -#define USB_CNTR_SOFM_Msk (0x1U << USB_CNTR_SOFM_Pos) /*!< 0x00000200 */ -#define USB_CNTR_SOFM USB_CNTR_SOFM_Msk /*!< Start Of Frame Interrupt Mask */ -#define USB_CNTR_RESETM_Pos (10U) -#define USB_CNTR_RESETM_Msk (0x1U << USB_CNTR_RESETM_Pos) /*!< 0x00000400 */ -#define USB_CNTR_RESETM USB_CNTR_RESETM_Msk /*!< RESET Interrupt Mask */ -#define USB_CNTR_SUSPM_Pos (11U) -#define USB_CNTR_SUSPM_Msk (0x1U << USB_CNTR_SUSPM_Pos) /*!< 0x00000800 */ -#define USB_CNTR_SUSPM USB_CNTR_SUSPM_Msk /*!< Suspend mode Interrupt Mask */ -#define USB_CNTR_WKUPM_Pos (12U) -#define USB_CNTR_WKUPM_Msk (0x1U << USB_CNTR_WKUPM_Pos) /*!< 0x00001000 */ -#define USB_CNTR_WKUPM USB_CNTR_WKUPM_Msk /*!< Wakeup Interrupt Mask */ -#define USB_CNTR_ERRM_Pos (13U) -#define USB_CNTR_ERRM_Msk (0x1U << USB_CNTR_ERRM_Pos) /*!< 0x00002000 */ -#define USB_CNTR_ERRM USB_CNTR_ERRM_Msk /*!< Error Interrupt Mask */ -#define USB_CNTR_PMAOVRM_Pos (14U) -#define USB_CNTR_PMAOVRM_Msk (0x1U << USB_CNTR_PMAOVRM_Pos) /*!< 0x00004000 */ -#define USB_CNTR_PMAOVRM USB_CNTR_PMAOVRM_Msk /*!< Packet Memory Area Over / Underrun Interrupt Mask */ -#define USB_CNTR_CTRM_Pos (15U) -#define USB_CNTR_CTRM_Msk (0x1U << USB_CNTR_CTRM_Pos) /*!< 0x00008000 */ -#define USB_CNTR_CTRM USB_CNTR_CTRM_Msk /*!< Correct Transfer Interrupt Mask */ - -/******************* Bit definition for USB_ISTR register *******************/ -#define USB_ISTR_EP_ID_Pos (0U) -#define USB_ISTR_EP_ID_Msk (0xFU << USB_ISTR_EP_ID_Pos) /*!< 0x0000000F */ -#define USB_ISTR_EP_ID USB_ISTR_EP_ID_Msk /*!< Endpoint Identifier */ -#define USB_ISTR_DIR_Pos (4U) -#define USB_ISTR_DIR_Msk (0x1U << USB_ISTR_DIR_Pos) /*!< 0x00000010 */ -#define USB_ISTR_DIR USB_ISTR_DIR_Msk /*!< Direction of transaction */ -#define USB_ISTR_ESOF_Pos (8U) -#define USB_ISTR_ESOF_Msk (0x1U << USB_ISTR_ESOF_Pos) /*!< 0x00000100 */ -#define USB_ISTR_ESOF USB_ISTR_ESOF_Msk /*!< Expected Start Of Frame */ -#define USB_ISTR_SOF_Pos (9U) -#define USB_ISTR_SOF_Msk (0x1U << USB_ISTR_SOF_Pos) /*!< 0x00000200 */ -#define USB_ISTR_SOF USB_ISTR_SOF_Msk /*!< Start Of Frame */ -#define USB_ISTR_RESET_Pos (10U) -#define USB_ISTR_RESET_Msk (0x1U << USB_ISTR_RESET_Pos) /*!< 0x00000400 */ -#define USB_ISTR_RESET USB_ISTR_RESET_Msk /*!< USB RESET request */ -#define USB_ISTR_SUSP_Pos (11U) -#define USB_ISTR_SUSP_Msk (0x1U << USB_ISTR_SUSP_Pos) /*!< 0x00000800 */ -#define USB_ISTR_SUSP USB_ISTR_SUSP_Msk /*!< Suspend mode request */ -#define USB_ISTR_WKUP_Pos (12U) -#define USB_ISTR_WKUP_Msk (0x1U << USB_ISTR_WKUP_Pos) /*!< 0x00001000 */ -#define USB_ISTR_WKUP USB_ISTR_WKUP_Msk /*!< Wake up */ -#define USB_ISTR_ERR_Pos (13U) -#define USB_ISTR_ERR_Msk (0x1U << USB_ISTR_ERR_Pos) /*!< 0x00002000 */ -#define USB_ISTR_ERR USB_ISTR_ERR_Msk /*!< Error */ -#define USB_ISTR_PMAOVR_Pos (14U) -#define USB_ISTR_PMAOVR_Msk (0x1U << USB_ISTR_PMAOVR_Pos) /*!< 0x00004000 */ -#define USB_ISTR_PMAOVR USB_ISTR_PMAOVR_Msk /*!< Packet Memory Area Over / Underrun */ -#define USB_ISTR_CTR_Pos (15U) -#define USB_ISTR_CTR_Msk (0x1U << USB_ISTR_CTR_Pos) /*!< 0x00008000 */ -#define USB_ISTR_CTR USB_ISTR_CTR_Msk /*!< Correct Transfer */ - -/******************* Bit definition for USB_FNR register ********************/ -#define USB_FNR_FN_Pos (0U) -#define USB_FNR_FN_Msk (0x7FFU << USB_FNR_FN_Pos) /*!< 0x000007FF */ -#define USB_FNR_FN USB_FNR_FN_Msk /*!< Frame Number */ -#define USB_FNR_LSOF_Pos (11U) -#define USB_FNR_LSOF_Msk (0x3U << USB_FNR_LSOF_Pos) /*!< 0x00001800 */ -#define USB_FNR_LSOF USB_FNR_LSOF_Msk /*!< Lost SOF */ -#define USB_FNR_LCK_Pos (13U) -#define USB_FNR_LCK_Msk (0x1U << USB_FNR_LCK_Pos) /*!< 0x00002000 */ -#define USB_FNR_LCK USB_FNR_LCK_Msk /*!< Locked */ -#define USB_FNR_RXDM_Pos (14U) -#define USB_FNR_RXDM_Msk (0x1U << USB_FNR_RXDM_Pos) /*!< 0x00004000 */ -#define USB_FNR_RXDM USB_FNR_RXDM_Msk /*!< Receive Data - Line Status */ -#define USB_FNR_RXDP_Pos (15U) -#define USB_FNR_RXDP_Msk (0x1U << USB_FNR_RXDP_Pos) /*!< 0x00008000 */ -#define USB_FNR_RXDP USB_FNR_RXDP_Msk /*!< Receive Data + Line Status */ - -/****************** Bit definition for USB_DADDR register *******************/ -#define USB_DADDR_ADD_Pos (0U) -#define USB_DADDR_ADD_Msk (0x7FU << USB_DADDR_ADD_Pos) /*!< 0x0000007F */ -#define USB_DADDR_ADD USB_DADDR_ADD_Msk /*!< ADD[6:0] bits (Device Address) */ -#define USB_DADDR_ADD0_Pos (0U) -#define USB_DADDR_ADD0_Msk (0x1U << USB_DADDR_ADD0_Pos) /*!< 0x00000001 */ -#define USB_DADDR_ADD0 USB_DADDR_ADD0_Msk /*!< Bit 0 */ -#define USB_DADDR_ADD1_Pos (1U) -#define USB_DADDR_ADD1_Msk (0x1U << USB_DADDR_ADD1_Pos) /*!< 0x00000002 */ -#define USB_DADDR_ADD1 USB_DADDR_ADD1_Msk /*!< Bit 1 */ -#define USB_DADDR_ADD2_Pos (2U) -#define USB_DADDR_ADD2_Msk (0x1U << USB_DADDR_ADD2_Pos) /*!< 0x00000004 */ -#define USB_DADDR_ADD2 USB_DADDR_ADD2_Msk /*!< Bit 2 */ -#define USB_DADDR_ADD3_Pos (3U) -#define USB_DADDR_ADD3_Msk (0x1U << USB_DADDR_ADD3_Pos) /*!< 0x00000008 */ -#define USB_DADDR_ADD3 USB_DADDR_ADD3_Msk /*!< Bit 3 */ -#define USB_DADDR_ADD4_Pos (4U) -#define USB_DADDR_ADD4_Msk (0x1U << USB_DADDR_ADD4_Pos) /*!< 0x00000010 */ -#define USB_DADDR_ADD4 USB_DADDR_ADD4_Msk /*!< Bit 4 */ -#define USB_DADDR_ADD5_Pos (5U) -#define USB_DADDR_ADD5_Msk (0x1U << USB_DADDR_ADD5_Pos) /*!< 0x00000020 */ -#define USB_DADDR_ADD5 USB_DADDR_ADD5_Msk /*!< Bit 5 */ -#define USB_DADDR_ADD6_Pos (6U) -#define USB_DADDR_ADD6_Msk (0x1U << USB_DADDR_ADD6_Pos) /*!< 0x00000040 */ -#define USB_DADDR_ADD6 USB_DADDR_ADD6_Msk /*!< Bit 6 */ - -#define USB_DADDR_EF_Pos (7U) -#define USB_DADDR_EF_Msk (0x1U << USB_DADDR_EF_Pos) /*!< 0x00000080 */ -#define USB_DADDR_EF USB_DADDR_EF_Msk /*!< Enable Function */ - -/****************** Bit definition for USB_BTABLE register ******************/ -#define USB_BTABLE_BTABLE_Pos (3U) -#define USB_BTABLE_BTABLE_Msk (0x1FFFU << USB_BTABLE_BTABLE_Pos) /*!< 0x0000FFF8 */ -#define USB_BTABLE_BTABLE USB_BTABLE_BTABLE_Msk /*!< Buffer Table */ - -/*!< Buffer descriptor table */ -/***************** Bit definition for USB_ADDR0_TX register *****************/ -#define USB_ADDR0_TX_ADDR0_TX_Pos (1U) -#define USB_ADDR0_TX_ADDR0_TX_Msk (0x7FFFU << USB_ADDR0_TX_ADDR0_TX_Pos) /*!< 0x0000FFFE */ -#define USB_ADDR0_TX_ADDR0_TX USB_ADDR0_TX_ADDR0_TX_Msk /*!< Transmission Buffer Address 0 */ - -/***************** Bit definition for USB_ADDR1_TX register *****************/ -#define USB_ADDR1_TX_ADDR1_TX_Pos (1U) -#define USB_ADDR1_TX_ADDR1_TX_Msk (0x7FFFU << USB_ADDR1_TX_ADDR1_TX_Pos) /*!< 0x0000FFFE */ -#define USB_ADDR1_TX_ADDR1_TX USB_ADDR1_TX_ADDR1_TX_Msk /*!< Transmission Buffer Address 1 */ - -/***************** Bit definition for USB_ADDR2_TX register *****************/ -#define USB_ADDR2_TX_ADDR2_TX_Pos (1U) -#define USB_ADDR2_TX_ADDR2_TX_Msk (0x7FFFU << USB_ADDR2_TX_ADDR2_TX_Pos) /*!< 0x0000FFFE */ -#define USB_ADDR2_TX_ADDR2_TX USB_ADDR2_TX_ADDR2_TX_Msk /*!< Transmission Buffer Address 2 */ - -/***************** Bit definition for USB_ADDR3_TX register *****************/ -#define USB_ADDR3_TX_ADDR3_TX_Pos (1U) -#define USB_ADDR3_TX_ADDR3_TX_Msk (0x7FFFU << USB_ADDR3_TX_ADDR3_TX_Pos) /*!< 0x0000FFFE */ -#define USB_ADDR3_TX_ADDR3_TX USB_ADDR3_TX_ADDR3_TX_Msk /*!< Transmission Buffer Address 3 */ - -/***************** Bit definition for USB_ADDR4_TX register *****************/ -#define USB_ADDR4_TX_ADDR4_TX_Pos (1U) -#define USB_ADDR4_TX_ADDR4_TX_Msk (0x7FFFU << USB_ADDR4_TX_ADDR4_TX_Pos) /*!< 0x0000FFFE */ -#define USB_ADDR4_TX_ADDR4_TX USB_ADDR4_TX_ADDR4_TX_Msk /*!< Transmission Buffer Address 4 */ - -/***************** Bit definition for USB_ADDR5_TX register *****************/ -#define USB_ADDR5_TX_ADDR5_TX_Pos (1U) -#define USB_ADDR5_TX_ADDR5_TX_Msk (0x7FFFU << USB_ADDR5_TX_ADDR5_TX_Pos) /*!< 0x0000FFFE */ -#define USB_ADDR5_TX_ADDR5_TX USB_ADDR5_TX_ADDR5_TX_Msk /*!< Transmission Buffer Address 5 */ - -/***************** Bit definition for USB_ADDR6_TX register *****************/ -#define USB_ADDR6_TX_ADDR6_TX_Pos (1U) -#define USB_ADDR6_TX_ADDR6_TX_Msk (0x7FFFU << USB_ADDR6_TX_ADDR6_TX_Pos) /*!< 0x0000FFFE */ -#define USB_ADDR6_TX_ADDR6_TX USB_ADDR6_TX_ADDR6_TX_Msk /*!< Transmission Buffer Address 6 */ - -/***************** Bit definition for USB_ADDR7_TX register *****************/ -#define USB_ADDR7_TX_ADDR7_TX_Pos (1U) -#define USB_ADDR7_TX_ADDR7_TX_Msk (0x7FFFU << USB_ADDR7_TX_ADDR7_TX_Pos) /*!< 0x0000FFFE */ -#define USB_ADDR7_TX_ADDR7_TX USB_ADDR7_TX_ADDR7_TX_Msk /*!< Transmission Buffer Address 7 */ - -/*----------------------------------------------------------------------------*/ - -/***************** Bit definition for USB_COUNT0_TX register ****************/ -#define USB_COUNT0_TX_COUNT0_TX_Pos (0U) -#define USB_COUNT0_TX_COUNT0_TX_Msk (0x3FFU << USB_COUNT0_TX_COUNT0_TX_Pos) /*!< 0x000003FF */ -#define USB_COUNT0_TX_COUNT0_TX USB_COUNT0_TX_COUNT0_TX_Msk /*!< Transmission Byte Count 0 */ - -/***************** Bit definition for USB_COUNT1_TX register ****************/ -#define USB_COUNT1_TX_COUNT1_TX_Pos (0U) -#define USB_COUNT1_TX_COUNT1_TX_Msk (0x3FFU << USB_COUNT1_TX_COUNT1_TX_Pos) /*!< 0x000003FF */ -#define USB_COUNT1_TX_COUNT1_TX USB_COUNT1_TX_COUNT1_TX_Msk /*!< Transmission Byte Count 1 */ - -/***************** Bit definition for USB_COUNT2_TX register ****************/ -#define USB_COUNT2_TX_COUNT2_TX_Pos (0U) -#define USB_COUNT2_TX_COUNT2_TX_Msk (0x3FFU << USB_COUNT2_TX_COUNT2_TX_Pos) /*!< 0x000003FF */ -#define USB_COUNT2_TX_COUNT2_TX USB_COUNT2_TX_COUNT2_TX_Msk /*!< Transmission Byte Count 2 */ - -/***************** Bit definition for USB_COUNT3_TX register ****************/ -#define USB_COUNT3_TX_COUNT3_TX_Pos (0U) -#define USB_COUNT3_TX_COUNT3_TX_Msk (0x3FFU << USB_COUNT3_TX_COUNT3_TX_Pos) /*!< 0x000003FF */ -#define USB_COUNT3_TX_COUNT3_TX USB_COUNT3_TX_COUNT3_TX_Msk /*!< Transmission Byte Count 3 */ - -/***************** Bit definition for USB_COUNT4_TX register ****************/ -#define USB_COUNT4_TX_COUNT4_TX_Pos (0U) -#define USB_COUNT4_TX_COUNT4_TX_Msk (0x3FFU << USB_COUNT4_TX_COUNT4_TX_Pos) /*!< 0x000003FF */ -#define USB_COUNT4_TX_COUNT4_TX USB_COUNT4_TX_COUNT4_TX_Msk /*!< Transmission Byte Count 4 */ - -/***************** Bit definition for USB_COUNT5_TX register ****************/ -#define USB_COUNT5_TX_COUNT5_TX_Pos (0U) -#define USB_COUNT5_TX_COUNT5_TX_Msk (0x3FFU << USB_COUNT5_TX_COUNT5_TX_Pos) /*!< 0x000003FF */ -#define USB_COUNT5_TX_COUNT5_TX USB_COUNT5_TX_COUNT5_TX_Msk /*!< Transmission Byte Count 5 */ - -/***************** Bit definition for USB_COUNT6_TX register ****************/ -#define USB_COUNT6_TX_COUNT6_TX_Pos (0U) -#define USB_COUNT6_TX_COUNT6_TX_Msk (0x3FFU << USB_COUNT6_TX_COUNT6_TX_Pos) /*!< 0x000003FF */ -#define USB_COUNT6_TX_COUNT6_TX USB_COUNT6_TX_COUNT6_TX_Msk /*!< Transmission Byte Count 6 */ - -/***************** Bit definition for USB_COUNT7_TX register ****************/ -#define USB_COUNT7_TX_COUNT7_TX_Pos (0U) -#define USB_COUNT7_TX_COUNT7_TX_Msk (0x3FFU << USB_COUNT7_TX_COUNT7_TX_Pos) /*!< 0x000003FF */ -#define USB_COUNT7_TX_COUNT7_TX USB_COUNT7_TX_COUNT7_TX_Msk /*!< Transmission Byte Count 7 */ - -/*----------------------------------------------------------------------------*/ - -/**************** Bit definition for USB_COUNT0_TX_0 register ***************/ -#define USB_COUNT0_TX_0_COUNT0_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 0 (low) */ - -/**************** Bit definition for USB_COUNT0_TX_1 register ***************/ -#define USB_COUNT0_TX_1_COUNT0_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 0 (high) */ - -/**************** Bit definition for USB_COUNT1_TX_0 register ***************/ -#define USB_COUNT1_TX_0_COUNT1_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 1 (low) */ - -/**************** Bit definition for USB_COUNT1_TX_1 register ***************/ -#define USB_COUNT1_TX_1_COUNT1_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 1 (high) */ - -/**************** Bit definition for USB_COUNT2_TX_0 register ***************/ -#define USB_COUNT2_TX_0_COUNT2_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 2 (low) */ - -/**************** Bit definition for USB_COUNT2_TX_1 register ***************/ -#define USB_COUNT2_TX_1_COUNT2_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 2 (high) */ - -/**************** Bit definition for USB_COUNT3_TX_0 register ***************/ -#define USB_COUNT3_TX_0_COUNT3_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 3 (low) */ - -/**************** Bit definition for USB_COUNT3_TX_1 register ***************/ -#define USB_COUNT3_TX_1_COUNT3_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 3 (high) */ - -/**************** Bit definition for USB_COUNT4_TX_0 register ***************/ -#define USB_COUNT4_TX_0_COUNT4_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 4 (low) */ - -/**************** Bit definition for USB_COUNT4_TX_1 register ***************/ -#define USB_COUNT4_TX_1_COUNT4_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 4 (high) */ - -/**************** Bit definition for USB_COUNT5_TX_0 register ***************/ -#define USB_COUNT5_TX_0_COUNT5_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 5 (low) */ - -/**************** Bit definition for USB_COUNT5_TX_1 register ***************/ -#define USB_COUNT5_TX_1_COUNT5_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 5 (high) */ - -/**************** Bit definition for USB_COUNT6_TX_0 register ***************/ -#define USB_COUNT6_TX_0_COUNT6_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 6 (low) */ - -/**************** Bit definition for USB_COUNT6_TX_1 register ***************/ -#define USB_COUNT6_TX_1_COUNT6_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 6 (high) */ - -/**************** Bit definition for USB_COUNT7_TX_0 register ***************/ -#define USB_COUNT7_TX_0_COUNT7_TX_0 ((uint32_t)0x000003FF) /*!< Transmission Byte Count 7 (low) */ - -/**************** Bit definition for USB_COUNT7_TX_1 register ***************/ -#define USB_COUNT7_TX_1_COUNT7_TX_1 ((uint32_t)0x03FF0000) /*!< Transmission Byte Count 7 (high) */ - -/*----------------------------------------------------------------------------*/ - -/***************** Bit definition for USB_ADDR0_RX register *****************/ -#define USB_ADDR0_RX_ADDR0_RX_Pos (1U) -#define USB_ADDR0_RX_ADDR0_RX_Msk (0x7FFFU << USB_ADDR0_RX_ADDR0_RX_Pos) /*!< 0x0000FFFE */ -#define USB_ADDR0_RX_ADDR0_RX USB_ADDR0_RX_ADDR0_RX_Msk /*!< Reception Buffer Address 0 */ - -/***************** Bit definition for USB_ADDR1_RX register *****************/ -#define USB_ADDR1_RX_ADDR1_RX_Pos (1U) -#define USB_ADDR1_RX_ADDR1_RX_Msk (0x7FFFU << USB_ADDR1_RX_ADDR1_RX_Pos) /*!< 0x0000FFFE */ -#define USB_ADDR1_RX_ADDR1_RX USB_ADDR1_RX_ADDR1_RX_Msk /*!< Reception Buffer Address 1 */ - -/***************** Bit definition for USB_ADDR2_RX register *****************/ -#define USB_ADDR2_RX_ADDR2_RX_Pos (1U) -#define USB_ADDR2_RX_ADDR2_RX_Msk (0x7FFFU << USB_ADDR2_RX_ADDR2_RX_Pos) /*!< 0x0000FFFE */ -#define USB_ADDR2_RX_ADDR2_RX USB_ADDR2_RX_ADDR2_RX_Msk /*!< Reception Buffer Address 2 */ - -/***************** Bit definition for USB_ADDR3_RX register *****************/ -#define USB_ADDR3_RX_ADDR3_RX_Pos (1U) -#define USB_ADDR3_RX_ADDR3_RX_Msk (0x7FFFU << USB_ADDR3_RX_ADDR3_RX_Pos) /*!< 0x0000FFFE */ -#define USB_ADDR3_RX_ADDR3_RX USB_ADDR3_RX_ADDR3_RX_Msk /*!< Reception Buffer Address 3 */ - -/***************** Bit definition for USB_ADDR4_RX register *****************/ -#define USB_ADDR4_RX_ADDR4_RX_Pos (1U) -#define USB_ADDR4_RX_ADDR4_RX_Msk (0x7FFFU << USB_ADDR4_RX_ADDR4_RX_Pos) /*!< 0x0000FFFE */ -#define USB_ADDR4_RX_ADDR4_RX USB_ADDR4_RX_ADDR4_RX_Msk /*!< Reception Buffer Address 4 */ - -/***************** Bit definition for USB_ADDR5_RX register *****************/ -#define USB_ADDR5_RX_ADDR5_RX_Pos (1U) -#define USB_ADDR5_RX_ADDR5_RX_Msk (0x7FFFU << USB_ADDR5_RX_ADDR5_RX_Pos) /*!< 0x0000FFFE */ -#define USB_ADDR5_RX_ADDR5_RX USB_ADDR5_RX_ADDR5_RX_Msk /*!< Reception Buffer Address 5 */ - -/***************** Bit definition for USB_ADDR6_RX register *****************/ -#define USB_ADDR6_RX_ADDR6_RX_Pos (1U) -#define USB_ADDR6_RX_ADDR6_RX_Msk (0x7FFFU << USB_ADDR6_RX_ADDR6_RX_Pos) /*!< 0x0000FFFE */ -#define USB_ADDR6_RX_ADDR6_RX USB_ADDR6_RX_ADDR6_RX_Msk /*!< Reception Buffer Address 6 */ - -/***************** Bit definition for USB_ADDR7_RX register *****************/ -#define USB_ADDR7_RX_ADDR7_RX_Pos (1U) -#define USB_ADDR7_RX_ADDR7_RX_Msk (0x7FFFU << USB_ADDR7_RX_ADDR7_RX_Pos) /*!< 0x0000FFFE */ -#define USB_ADDR7_RX_ADDR7_RX USB_ADDR7_RX_ADDR7_RX_Msk /*!< Reception Buffer Address 7 */ - -/*----------------------------------------------------------------------------*/ - -/***************** Bit definition for USB_COUNT0_RX register ****************/ -#define USB_COUNT0_RX_COUNT0_RX_Pos (0U) -#define USB_COUNT0_RX_COUNT0_RX_Msk (0x3FFU << USB_COUNT0_RX_COUNT0_RX_Pos) /*!< 0x000003FF */ -#define USB_COUNT0_RX_COUNT0_RX USB_COUNT0_RX_COUNT0_RX_Msk /*!< Reception Byte Count */ - -#define USB_COUNT0_RX_NUM_BLOCK_Pos (10U) -#define USB_COUNT0_RX_NUM_BLOCK_Msk (0x1FU << USB_COUNT0_RX_NUM_BLOCK_Pos) /*!< 0x00007C00 */ -#define USB_COUNT0_RX_NUM_BLOCK USB_COUNT0_RX_NUM_BLOCK_Msk /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT0_RX_NUM_BLOCK_0 (0x01U << USB_COUNT0_RX_NUM_BLOCK_Pos) /*!< 0x00000400 */ -#define USB_COUNT0_RX_NUM_BLOCK_1 (0x02U << USB_COUNT0_RX_NUM_BLOCK_Pos) /*!< 0x00000800 */ -#define USB_COUNT0_RX_NUM_BLOCK_2 (0x04U << USB_COUNT0_RX_NUM_BLOCK_Pos) /*!< 0x00001000 */ -#define USB_COUNT0_RX_NUM_BLOCK_3 (0x08U << USB_COUNT0_RX_NUM_BLOCK_Pos) /*!< 0x00002000 */ -#define USB_COUNT0_RX_NUM_BLOCK_4 (0x10U << USB_COUNT0_RX_NUM_BLOCK_Pos) /*!< 0x00004000 */ - -#define USB_COUNT0_RX_BLSIZE_Pos (15U) -#define USB_COUNT0_RX_BLSIZE_Msk (0x1U << USB_COUNT0_RX_BLSIZE_Pos) /*!< 0x00008000 */ -#define USB_COUNT0_RX_BLSIZE USB_COUNT0_RX_BLSIZE_Msk /*!< BLock SIZE */ - -/***************** Bit definition for USB_COUNT1_RX register ****************/ -#define USB_COUNT1_RX_COUNT1_RX_Pos (0U) -#define USB_COUNT1_RX_COUNT1_RX_Msk (0x3FFU << USB_COUNT1_RX_COUNT1_RX_Pos) /*!< 0x000003FF */ -#define USB_COUNT1_RX_COUNT1_RX USB_COUNT1_RX_COUNT1_RX_Msk /*!< Reception Byte Count */ - -#define USB_COUNT1_RX_NUM_BLOCK_Pos (10U) -#define USB_COUNT1_RX_NUM_BLOCK_Msk (0x1FU << USB_COUNT1_RX_NUM_BLOCK_Pos) /*!< 0x00007C00 */ -#define USB_COUNT1_RX_NUM_BLOCK USB_COUNT1_RX_NUM_BLOCK_Msk /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT1_RX_NUM_BLOCK_0 (0x01U << USB_COUNT1_RX_NUM_BLOCK_Pos) /*!< 0x00000400 */ -#define USB_COUNT1_RX_NUM_BLOCK_1 (0x02U << USB_COUNT1_RX_NUM_BLOCK_Pos) /*!< 0x00000800 */ -#define USB_COUNT1_RX_NUM_BLOCK_2 (0x04U << USB_COUNT1_RX_NUM_BLOCK_Pos) /*!< 0x00001000 */ -#define USB_COUNT1_RX_NUM_BLOCK_3 (0x08U << USB_COUNT1_RX_NUM_BLOCK_Pos) /*!< 0x00002000 */ -#define USB_COUNT1_RX_NUM_BLOCK_4 (0x10U << USB_COUNT1_RX_NUM_BLOCK_Pos) /*!< 0x00004000 */ - -#define USB_COUNT1_RX_BLSIZE_Pos (15U) -#define USB_COUNT1_RX_BLSIZE_Msk (0x1U << USB_COUNT1_RX_BLSIZE_Pos) /*!< 0x00008000 */ -#define USB_COUNT1_RX_BLSIZE USB_COUNT1_RX_BLSIZE_Msk /*!< BLock SIZE */ - -/***************** Bit definition for USB_COUNT2_RX register ****************/ -#define USB_COUNT2_RX_COUNT2_RX_Pos (0U) -#define USB_COUNT2_RX_COUNT2_RX_Msk (0x3FFU << USB_COUNT2_RX_COUNT2_RX_Pos) /*!< 0x000003FF */ -#define USB_COUNT2_RX_COUNT2_RX USB_COUNT2_RX_COUNT2_RX_Msk /*!< Reception Byte Count */ - -#define USB_COUNT2_RX_NUM_BLOCK_Pos (10U) -#define USB_COUNT2_RX_NUM_BLOCK_Msk (0x1FU << USB_COUNT2_RX_NUM_BLOCK_Pos) /*!< 0x00007C00 */ -#define USB_COUNT2_RX_NUM_BLOCK USB_COUNT2_RX_NUM_BLOCK_Msk /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT2_RX_NUM_BLOCK_0 (0x01U << USB_COUNT2_RX_NUM_BLOCK_Pos) /*!< 0x00000400 */ -#define USB_COUNT2_RX_NUM_BLOCK_1 (0x02U << USB_COUNT2_RX_NUM_BLOCK_Pos) /*!< 0x00000800 */ -#define USB_COUNT2_RX_NUM_BLOCK_2 (0x04U << USB_COUNT2_RX_NUM_BLOCK_Pos) /*!< 0x00001000 */ -#define USB_COUNT2_RX_NUM_BLOCK_3 (0x08U << USB_COUNT2_RX_NUM_BLOCK_Pos) /*!< 0x00002000 */ -#define USB_COUNT2_RX_NUM_BLOCK_4 (0x10U << USB_COUNT2_RX_NUM_BLOCK_Pos) /*!< 0x00004000 */ - -#define USB_COUNT2_RX_BLSIZE_Pos (15U) -#define USB_COUNT2_RX_BLSIZE_Msk (0x1U << USB_COUNT2_RX_BLSIZE_Pos) /*!< 0x00008000 */ -#define USB_COUNT2_RX_BLSIZE USB_COUNT2_RX_BLSIZE_Msk /*!< BLock SIZE */ - -/***************** Bit definition for USB_COUNT3_RX register ****************/ -#define USB_COUNT3_RX_COUNT3_RX_Pos (0U) -#define USB_COUNT3_RX_COUNT3_RX_Msk (0x3FFU << USB_COUNT3_RX_COUNT3_RX_Pos) /*!< 0x000003FF */ -#define USB_COUNT3_RX_COUNT3_RX USB_COUNT3_RX_COUNT3_RX_Msk /*!< Reception Byte Count */ - -#define USB_COUNT3_RX_NUM_BLOCK_Pos (10U) -#define USB_COUNT3_RX_NUM_BLOCK_Msk (0x1FU << USB_COUNT3_RX_NUM_BLOCK_Pos) /*!< 0x00007C00 */ -#define USB_COUNT3_RX_NUM_BLOCK USB_COUNT3_RX_NUM_BLOCK_Msk /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT3_RX_NUM_BLOCK_0 (0x01U << USB_COUNT3_RX_NUM_BLOCK_Pos) /*!< 0x00000400 */ -#define USB_COUNT3_RX_NUM_BLOCK_1 (0x02U << USB_COUNT3_RX_NUM_BLOCK_Pos) /*!< 0x00000800 */ -#define USB_COUNT3_RX_NUM_BLOCK_2 (0x04U << USB_COUNT3_RX_NUM_BLOCK_Pos) /*!< 0x00001000 */ -#define USB_COUNT3_RX_NUM_BLOCK_3 (0x08U << USB_COUNT3_RX_NUM_BLOCK_Pos) /*!< 0x00002000 */ -#define USB_COUNT3_RX_NUM_BLOCK_4 (0x10U << USB_COUNT3_RX_NUM_BLOCK_Pos) /*!< 0x00004000 */ - -#define USB_COUNT3_RX_BLSIZE_Pos (15U) -#define USB_COUNT3_RX_BLSIZE_Msk (0x1U << USB_COUNT3_RX_BLSIZE_Pos) /*!< 0x00008000 */ -#define USB_COUNT3_RX_BLSIZE USB_COUNT3_RX_BLSIZE_Msk /*!< BLock SIZE */ - -/***************** Bit definition for USB_COUNT4_RX register ****************/ -#define USB_COUNT4_RX_COUNT4_RX_Pos (0U) -#define USB_COUNT4_RX_COUNT4_RX_Msk (0x3FFU << USB_COUNT4_RX_COUNT4_RX_Pos) /*!< 0x000003FF */ -#define USB_COUNT4_RX_COUNT4_RX USB_COUNT4_RX_COUNT4_RX_Msk /*!< Reception Byte Count */ - -#define USB_COUNT4_RX_NUM_BLOCK_Pos (10U) -#define USB_COUNT4_RX_NUM_BLOCK_Msk (0x1FU << USB_COUNT4_RX_NUM_BLOCK_Pos) /*!< 0x00007C00 */ -#define USB_COUNT4_RX_NUM_BLOCK USB_COUNT4_RX_NUM_BLOCK_Msk /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT4_RX_NUM_BLOCK_0 (0x01U << USB_COUNT4_RX_NUM_BLOCK_Pos) /*!< 0x00000400 */ -#define USB_COUNT4_RX_NUM_BLOCK_1 (0x02U << USB_COUNT4_RX_NUM_BLOCK_Pos) /*!< 0x00000800 */ -#define USB_COUNT4_RX_NUM_BLOCK_2 (0x04U << USB_COUNT4_RX_NUM_BLOCK_Pos) /*!< 0x00001000 */ -#define USB_COUNT4_RX_NUM_BLOCK_3 (0x08U << USB_COUNT4_RX_NUM_BLOCK_Pos) /*!< 0x00002000 */ -#define USB_COUNT4_RX_NUM_BLOCK_4 (0x10U << USB_COUNT4_RX_NUM_BLOCK_Pos) /*!< 0x00004000 */ - -#define USB_COUNT4_RX_BLSIZE_Pos (15U) -#define USB_COUNT4_RX_BLSIZE_Msk (0x1U << USB_COUNT4_RX_BLSIZE_Pos) /*!< 0x00008000 */ -#define USB_COUNT4_RX_BLSIZE USB_COUNT4_RX_BLSIZE_Msk /*!< BLock SIZE */ - -/***************** Bit definition for USB_COUNT5_RX register ****************/ -#define USB_COUNT5_RX_COUNT5_RX_Pos (0U) -#define USB_COUNT5_RX_COUNT5_RX_Msk (0x3FFU << USB_COUNT5_RX_COUNT5_RX_Pos) /*!< 0x000003FF */ -#define USB_COUNT5_RX_COUNT5_RX USB_COUNT5_RX_COUNT5_RX_Msk /*!< Reception Byte Count */ - -#define USB_COUNT5_RX_NUM_BLOCK_Pos (10U) -#define USB_COUNT5_RX_NUM_BLOCK_Msk (0x1FU << USB_COUNT5_RX_NUM_BLOCK_Pos) /*!< 0x00007C00 */ -#define USB_COUNT5_RX_NUM_BLOCK USB_COUNT5_RX_NUM_BLOCK_Msk /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT5_RX_NUM_BLOCK_0 (0x01U << USB_COUNT5_RX_NUM_BLOCK_Pos) /*!< 0x00000400 */ -#define USB_COUNT5_RX_NUM_BLOCK_1 (0x02U << USB_COUNT5_RX_NUM_BLOCK_Pos) /*!< 0x00000800 */ -#define USB_COUNT5_RX_NUM_BLOCK_2 (0x04U << USB_COUNT5_RX_NUM_BLOCK_Pos) /*!< 0x00001000 */ -#define USB_COUNT5_RX_NUM_BLOCK_3 (0x08U << USB_COUNT5_RX_NUM_BLOCK_Pos) /*!< 0x00002000 */ -#define USB_COUNT5_RX_NUM_BLOCK_4 (0x10U << USB_COUNT5_RX_NUM_BLOCK_Pos) /*!< 0x00004000 */ - -#define USB_COUNT5_RX_BLSIZE_Pos (15U) -#define USB_COUNT5_RX_BLSIZE_Msk (0x1U << USB_COUNT5_RX_BLSIZE_Pos) /*!< 0x00008000 */ -#define USB_COUNT5_RX_BLSIZE USB_COUNT5_RX_BLSIZE_Msk /*!< BLock SIZE */ - -/***************** Bit definition for USB_COUNT6_RX register ****************/ -#define USB_COUNT6_RX_COUNT6_RX_Pos (0U) -#define USB_COUNT6_RX_COUNT6_RX_Msk (0x3FFU << USB_COUNT6_RX_COUNT6_RX_Pos) /*!< 0x000003FF */ -#define USB_COUNT6_RX_COUNT6_RX USB_COUNT6_RX_COUNT6_RX_Msk /*!< Reception Byte Count */ - -#define USB_COUNT6_RX_NUM_BLOCK_Pos (10U) -#define USB_COUNT6_RX_NUM_BLOCK_Msk (0x1FU << USB_COUNT6_RX_NUM_BLOCK_Pos) /*!< 0x00007C00 */ -#define USB_COUNT6_RX_NUM_BLOCK USB_COUNT6_RX_NUM_BLOCK_Msk /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT6_RX_NUM_BLOCK_0 (0x01U << USB_COUNT6_RX_NUM_BLOCK_Pos) /*!< 0x00000400 */ -#define USB_COUNT6_RX_NUM_BLOCK_1 (0x02U << USB_COUNT6_RX_NUM_BLOCK_Pos) /*!< 0x00000800 */ -#define USB_COUNT6_RX_NUM_BLOCK_2 (0x04U << USB_COUNT6_RX_NUM_BLOCK_Pos) /*!< 0x00001000 */ -#define USB_COUNT6_RX_NUM_BLOCK_3 (0x08U << USB_COUNT6_RX_NUM_BLOCK_Pos) /*!< 0x00002000 */ -#define USB_COUNT6_RX_NUM_BLOCK_4 (0x10U << USB_COUNT6_RX_NUM_BLOCK_Pos) /*!< 0x00004000 */ - -#define USB_COUNT6_RX_BLSIZE_Pos (15U) -#define USB_COUNT6_RX_BLSIZE_Msk (0x1U << USB_COUNT6_RX_BLSIZE_Pos) /*!< 0x00008000 */ -#define USB_COUNT6_RX_BLSIZE USB_COUNT6_RX_BLSIZE_Msk /*!< BLock SIZE */ - -/***************** Bit definition for USB_COUNT7_RX register ****************/ -#define USB_COUNT7_RX_COUNT7_RX_Pos (0U) -#define USB_COUNT7_RX_COUNT7_RX_Msk (0x3FFU << USB_COUNT7_RX_COUNT7_RX_Pos) /*!< 0x000003FF */ -#define USB_COUNT7_RX_COUNT7_RX USB_COUNT7_RX_COUNT7_RX_Msk /*!< Reception Byte Count */ - -#define USB_COUNT7_RX_NUM_BLOCK_Pos (10U) -#define USB_COUNT7_RX_NUM_BLOCK_Msk (0x1FU << USB_COUNT7_RX_NUM_BLOCK_Pos) /*!< 0x00007C00 */ -#define USB_COUNT7_RX_NUM_BLOCK USB_COUNT7_RX_NUM_BLOCK_Msk /*!< NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT7_RX_NUM_BLOCK_0 (0x01U << USB_COUNT7_RX_NUM_BLOCK_Pos) /*!< 0x00000400 */ -#define USB_COUNT7_RX_NUM_BLOCK_1 (0x02U << USB_COUNT7_RX_NUM_BLOCK_Pos) /*!< 0x00000800 */ -#define USB_COUNT7_RX_NUM_BLOCK_2 (0x04U << USB_COUNT7_RX_NUM_BLOCK_Pos) /*!< 0x00001000 */ -#define USB_COUNT7_RX_NUM_BLOCK_3 (0x08U << USB_COUNT7_RX_NUM_BLOCK_Pos) /*!< 0x00002000 */ -#define USB_COUNT7_RX_NUM_BLOCK_4 (0x10U << USB_COUNT7_RX_NUM_BLOCK_Pos) /*!< 0x00004000 */ - -#define USB_COUNT7_RX_BLSIZE_Pos (15U) -#define USB_COUNT7_RX_BLSIZE_Msk (0x1U << USB_COUNT7_RX_BLSIZE_Pos) /*!< 0x00008000 */ -#define USB_COUNT7_RX_BLSIZE USB_COUNT7_RX_BLSIZE_Msk /*!< BLock SIZE */ - -/*----------------------------------------------------------------------------*/ - -/**************** Bit definition for USB_COUNT0_RX_0 register ***************/ -#define USB_COUNT0_RX_0_COUNT0_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ - -#define USB_COUNT0_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT0_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define USB_COUNT0_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define USB_COUNT0_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define USB_COUNT0_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define USB_COUNT0_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define USB_COUNT0_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT0_RX_1 register ***************/ -#define USB_COUNT0_RX_1_COUNT0_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ - -#define USB_COUNT0_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT0_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 1 */ -#define USB_COUNT0_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ -#define USB_COUNT0_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ -#define USB_COUNT0_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ -#define USB_COUNT0_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ - -#define USB_COUNT0_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ - -/**************** Bit definition for USB_COUNT1_RX_0 register ***************/ -#define USB_COUNT1_RX_0_COUNT1_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ - -#define USB_COUNT1_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT1_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define USB_COUNT1_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define USB_COUNT1_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define USB_COUNT1_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define USB_COUNT1_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define USB_COUNT1_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT1_RX_1 register ***************/ -#define USB_COUNT1_RX_1_COUNT1_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ - -#define USB_COUNT1_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT1_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define USB_COUNT1_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ -#define USB_COUNT1_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ -#define USB_COUNT1_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ -#define USB_COUNT1_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ - -#define USB_COUNT1_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ - -/**************** Bit definition for USB_COUNT2_RX_0 register ***************/ -#define USB_COUNT2_RX_0_COUNT2_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ - -#define USB_COUNT2_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT2_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define USB_COUNT2_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define USB_COUNT2_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define USB_COUNT2_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define USB_COUNT2_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define USB_COUNT2_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT2_RX_1 register ***************/ -#define USB_COUNT2_RX_1_COUNT2_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ - -#define USB_COUNT2_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT2_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define USB_COUNT2_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ -#define USB_COUNT2_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ -#define USB_COUNT2_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ -#define USB_COUNT2_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ - -#define USB_COUNT2_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ - -/**************** Bit definition for USB_COUNT3_RX_0 register ***************/ -#define USB_COUNT3_RX_0_COUNT3_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ - -#define USB_COUNT3_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT3_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define USB_COUNT3_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define USB_COUNT3_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define USB_COUNT3_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define USB_COUNT3_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define USB_COUNT3_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT3_RX_1 register ***************/ -#define USB_COUNT3_RX_1_COUNT3_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ - -#define USB_COUNT3_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT3_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define USB_COUNT3_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ -#define USB_COUNT3_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ -#define USB_COUNT3_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ -#define USB_COUNT3_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ - -#define USB_COUNT3_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ - -/**************** Bit definition for USB_COUNT4_RX_0 register ***************/ -#define USB_COUNT4_RX_0_COUNT4_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ - -#define USB_COUNT4_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT4_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define USB_COUNT4_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define USB_COUNT4_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define USB_COUNT4_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define USB_COUNT4_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define USB_COUNT4_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT4_RX_1 register ***************/ -#define USB_COUNT4_RX_1_COUNT4_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ - -#define USB_COUNT4_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT4_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define USB_COUNT4_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ -#define USB_COUNT4_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ -#define USB_COUNT4_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ -#define USB_COUNT4_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ - -#define USB_COUNT4_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ - -/**************** Bit definition for USB_COUNT5_RX_0 register ***************/ -#define USB_COUNT5_RX_0_COUNT5_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ - -#define USB_COUNT5_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT5_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define USB_COUNT5_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define USB_COUNT5_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define USB_COUNT5_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define USB_COUNT5_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define USB_COUNT5_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT5_RX_1 register ***************/ -#define USB_COUNT5_RX_1_COUNT5_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ - -#define USB_COUNT5_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT5_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define USB_COUNT5_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ -#define USB_COUNT5_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ -#define USB_COUNT5_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ -#define USB_COUNT5_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ - -#define USB_COUNT5_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ - -/*************** Bit definition for USB_COUNT6_RX_0 register ***************/ -#define USB_COUNT6_RX_0_COUNT6_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ - -#define USB_COUNT6_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT6_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define USB_COUNT6_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define USB_COUNT6_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define USB_COUNT6_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define USB_COUNT6_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define USB_COUNT6_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT6_RX_1 register ***************/ -#define USB_COUNT6_RX_1_COUNT6_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ - -#define USB_COUNT6_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT6_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define USB_COUNT6_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ -#define USB_COUNT6_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ -#define USB_COUNT6_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ -#define USB_COUNT6_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ - -#define USB_COUNT6_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ - -/*************** Bit definition for USB_COUNT7_RX_0 register ****************/ -#define USB_COUNT7_RX_0_COUNT7_RX_0 ((uint32_t)0x000003FF) /*!< Reception Byte Count (low) */ - -#define USB_COUNT7_RX_0_NUM_BLOCK_0 ((uint32_t)0x00007C00) /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT7_RX_0_NUM_BLOCK_0_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define USB_COUNT7_RX_0_NUM_BLOCK_0_1 ((uint32_t)0x00000800) /*!< Bit 1 */ -#define USB_COUNT7_RX_0_NUM_BLOCK_0_2 ((uint32_t)0x00001000) /*!< Bit 2 */ -#define USB_COUNT7_RX_0_NUM_BLOCK_0_3 ((uint32_t)0x00002000) /*!< Bit 3 */ -#define USB_COUNT7_RX_0_NUM_BLOCK_0_4 ((uint32_t)0x00004000) /*!< Bit 4 */ - -#define USB_COUNT7_RX_0_BLSIZE_0 ((uint32_t)0x00008000) /*!< BLock SIZE (low) */ - -/*************** Bit definition for USB_COUNT7_RX_1 register ****************/ -#define USB_COUNT7_RX_1_COUNT7_RX_1 ((uint32_t)0x03FF0000) /*!< Reception Byte Count (high) */ - -#define USB_COUNT7_RX_1_NUM_BLOCK_1 ((uint32_t)0x7C000000) /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT7_RX_1_NUM_BLOCK_1_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define USB_COUNT7_RX_1_NUM_BLOCK_1_1 ((uint32_t)0x08000000) /*!< Bit 1 */ -#define USB_COUNT7_RX_1_NUM_BLOCK_1_2 ((uint32_t)0x10000000) /*!< Bit 2 */ -#define USB_COUNT7_RX_1_NUM_BLOCK_1_3 ((uint32_t)0x20000000) /*!< Bit 3 */ -#define USB_COUNT7_RX_1_NUM_BLOCK_1_4 ((uint32_t)0x40000000) /*!< Bit 4 */ - -#define USB_COUNT7_RX_1_BLSIZE_1 ((uint32_t)0x80000000) /*!< BLock SIZE (high) */ - -/******************************************************************************/ -/* */ -/* Controller Area Network */ -/* */ -/******************************************************************************/ - -/*!< CAN control and status registers */ -/******************* Bit definition for CAN_MCR register ********************/ -#define CAN_MCR_INRQ_Pos (0U) -#define CAN_MCR_INRQ_Msk (0x1U << CAN_MCR_INRQ_Pos) /*!< 0x00000001 */ -#define CAN_MCR_INRQ CAN_MCR_INRQ_Msk /*!< Initialization Request */ -#define CAN_MCR_SLEEP_Pos (1U) -#define CAN_MCR_SLEEP_Msk (0x1U << CAN_MCR_SLEEP_Pos) /*!< 0x00000002 */ -#define CAN_MCR_SLEEP CAN_MCR_SLEEP_Msk /*!< Sleep Mode Request */ -#define CAN_MCR_TXFP_Pos (2U) -#define CAN_MCR_TXFP_Msk (0x1U << CAN_MCR_TXFP_Pos) /*!< 0x00000004 */ -#define CAN_MCR_TXFP CAN_MCR_TXFP_Msk /*!< Transmit FIFO Priority */ -#define CAN_MCR_RFLM_Pos (3U) -#define CAN_MCR_RFLM_Msk (0x1U << CAN_MCR_RFLM_Pos) /*!< 0x00000008 */ -#define CAN_MCR_RFLM CAN_MCR_RFLM_Msk /*!< Receive FIFO Locked Mode */ -#define CAN_MCR_NART_Pos (4U) -#define CAN_MCR_NART_Msk (0x1U << CAN_MCR_NART_Pos) /*!< 0x00000010 */ -#define CAN_MCR_NART CAN_MCR_NART_Msk /*!< No Automatic Retransmission */ -#define CAN_MCR_AWUM_Pos (5U) -#define CAN_MCR_AWUM_Msk (0x1U << CAN_MCR_AWUM_Pos) /*!< 0x00000020 */ -#define CAN_MCR_AWUM CAN_MCR_AWUM_Msk /*!< Automatic Wakeup Mode */ -#define CAN_MCR_ABOM_Pos (6U) -#define CAN_MCR_ABOM_Msk (0x1U << CAN_MCR_ABOM_Pos) /*!< 0x00000040 */ -#define CAN_MCR_ABOM CAN_MCR_ABOM_Msk /*!< Automatic Bus-Off Management */ -#define CAN_MCR_TTCM_Pos (7U) -#define CAN_MCR_TTCM_Msk (0x1U << CAN_MCR_TTCM_Pos) /*!< 0x00000080 */ -#define CAN_MCR_TTCM CAN_MCR_TTCM_Msk /*!< Time Triggered Communication Mode */ -#define CAN_MCR_RESET_Pos (15U) -#define CAN_MCR_RESET_Msk (0x1U << CAN_MCR_RESET_Pos) /*!< 0x00008000 */ -#define CAN_MCR_RESET CAN_MCR_RESET_Msk /*!< CAN software master reset */ -#define CAN_MCR_DBF_Pos (16U) -#define CAN_MCR_DBF_Msk (0x1U << CAN_MCR_DBF_Pos) /*!< 0x00010000 */ -#define CAN_MCR_DBF CAN_MCR_DBF_Msk /*!< CAN Debug freeze */ - -/******************* Bit definition for CAN_MSR register ********************/ -#define CAN_MSR_INAK_Pos (0U) -#define CAN_MSR_INAK_Msk (0x1U << CAN_MSR_INAK_Pos) /*!< 0x00000001 */ -#define CAN_MSR_INAK CAN_MSR_INAK_Msk /*!< Initialization Acknowledge */ -#define CAN_MSR_SLAK_Pos (1U) -#define CAN_MSR_SLAK_Msk (0x1U << CAN_MSR_SLAK_Pos) /*!< 0x00000002 */ -#define CAN_MSR_SLAK CAN_MSR_SLAK_Msk /*!< Sleep Acknowledge */ -#define CAN_MSR_ERRI_Pos (2U) -#define CAN_MSR_ERRI_Msk (0x1U << CAN_MSR_ERRI_Pos) /*!< 0x00000004 */ -#define CAN_MSR_ERRI CAN_MSR_ERRI_Msk /*!< Error Interrupt */ -#define CAN_MSR_WKUI_Pos (3U) -#define CAN_MSR_WKUI_Msk (0x1U << CAN_MSR_WKUI_Pos) /*!< 0x00000008 */ -#define CAN_MSR_WKUI CAN_MSR_WKUI_Msk /*!< Wakeup Interrupt */ -#define CAN_MSR_SLAKI_Pos (4U) -#define CAN_MSR_SLAKI_Msk (0x1U << CAN_MSR_SLAKI_Pos) /*!< 0x00000010 */ -#define CAN_MSR_SLAKI CAN_MSR_SLAKI_Msk /*!< Sleep Acknowledge Interrupt */ -#define CAN_MSR_TXM_Pos (8U) -#define CAN_MSR_TXM_Msk (0x1U << CAN_MSR_TXM_Pos) /*!< 0x00000100 */ -#define CAN_MSR_TXM CAN_MSR_TXM_Msk /*!< Transmit Mode */ -#define CAN_MSR_RXM_Pos (9U) -#define CAN_MSR_RXM_Msk (0x1U << CAN_MSR_RXM_Pos) /*!< 0x00000200 */ -#define CAN_MSR_RXM CAN_MSR_RXM_Msk /*!< Receive Mode */ -#define CAN_MSR_SAMP_Pos (10U) -#define CAN_MSR_SAMP_Msk (0x1U << CAN_MSR_SAMP_Pos) /*!< 0x00000400 */ -#define CAN_MSR_SAMP CAN_MSR_SAMP_Msk /*!< Last Sample Point */ -#define CAN_MSR_RX_Pos (11U) -#define CAN_MSR_RX_Msk (0x1U << CAN_MSR_RX_Pos) /*!< 0x00000800 */ -#define CAN_MSR_RX CAN_MSR_RX_Msk /*!< CAN Rx Signal */ - -/******************* Bit definition for CAN_TSR register ********************/ -#define CAN_TSR_RQCP0_Pos (0U) -#define CAN_TSR_RQCP0_Msk (0x1U << CAN_TSR_RQCP0_Pos) /*!< 0x00000001 */ -#define CAN_TSR_RQCP0 CAN_TSR_RQCP0_Msk /*!< Request Completed Mailbox0 */ -#define CAN_TSR_TXOK0_Pos (1U) -#define CAN_TSR_TXOK0_Msk (0x1U << CAN_TSR_TXOK0_Pos) /*!< 0x00000002 */ -#define CAN_TSR_TXOK0 CAN_TSR_TXOK0_Msk /*!< Transmission OK of Mailbox0 */ -#define CAN_TSR_ALST0_Pos (2U) -#define CAN_TSR_ALST0_Msk (0x1U << CAN_TSR_ALST0_Pos) /*!< 0x00000004 */ -#define CAN_TSR_ALST0 CAN_TSR_ALST0_Msk /*!< Arbitration Lost for Mailbox0 */ -#define CAN_TSR_TERR0_Pos (3U) -#define CAN_TSR_TERR0_Msk (0x1U << CAN_TSR_TERR0_Pos) /*!< 0x00000008 */ -#define CAN_TSR_TERR0 CAN_TSR_TERR0_Msk /*!< Transmission Error of Mailbox0 */ -#define CAN_TSR_ABRQ0_Pos (7U) -#define CAN_TSR_ABRQ0_Msk (0x1U << CAN_TSR_ABRQ0_Pos) /*!< 0x00000080 */ -#define CAN_TSR_ABRQ0 CAN_TSR_ABRQ0_Msk /*!< Abort Request for Mailbox0 */ -#define CAN_TSR_RQCP1_Pos (8U) -#define CAN_TSR_RQCP1_Msk (0x1U << CAN_TSR_RQCP1_Pos) /*!< 0x00000100 */ -#define CAN_TSR_RQCP1 CAN_TSR_RQCP1_Msk /*!< Request Completed Mailbox1 */ -#define CAN_TSR_TXOK1_Pos (9U) -#define CAN_TSR_TXOK1_Msk (0x1U << CAN_TSR_TXOK1_Pos) /*!< 0x00000200 */ -#define CAN_TSR_TXOK1 CAN_TSR_TXOK1_Msk /*!< Transmission OK of Mailbox1 */ -#define CAN_TSR_ALST1_Pos (10U) -#define CAN_TSR_ALST1_Msk (0x1U << CAN_TSR_ALST1_Pos) /*!< 0x00000400 */ -#define CAN_TSR_ALST1 CAN_TSR_ALST1_Msk /*!< Arbitration Lost for Mailbox1 */ -#define CAN_TSR_TERR1_Pos (11U) -#define CAN_TSR_TERR1_Msk (0x1U << CAN_TSR_TERR1_Pos) /*!< 0x00000800 */ -#define CAN_TSR_TERR1 CAN_TSR_TERR1_Msk /*!< Transmission Error of Mailbox1 */ -#define CAN_TSR_ABRQ1_Pos (15U) -#define CAN_TSR_ABRQ1_Msk (0x1U << CAN_TSR_ABRQ1_Pos) /*!< 0x00008000 */ -#define CAN_TSR_ABRQ1 CAN_TSR_ABRQ1_Msk /*!< Abort Request for Mailbox 1 */ -#define CAN_TSR_RQCP2_Pos (16U) -#define CAN_TSR_RQCP2_Msk (0x1U << CAN_TSR_RQCP2_Pos) /*!< 0x00010000 */ -#define CAN_TSR_RQCP2 CAN_TSR_RQCP2_Msk /*!< Request Completed Mailbox2 */ -#define CAN_TSR_TXOK2_Pos (17U) -#define CAN_TSR_TXOK2_Msk (0x1U << CAN_TSR_TXOK2_Pos) /*!< 0x00020000 */ -#define CAN_TSR_TXOK2 CAN_TSR_TXOK2_Msk /*!< Transmission OK of Mailbox 2 */ -#define CAN_TSR_ALST2_Pos (18U) -#define CAN_TSR_ALST2_Msk (0x1U << CAN_TSR_ALST2_Pos) /*!< 0x00040000 */ -#define CAN_TSR_ALST2 CAN_TSR_ALST2_Msk /*!< Arbitration Lost for mailbox 2 */ -#define CAN_TSR_TERR2_Pos (19U) -#define CAN_TSR_TERR2_Msk (0x1U << CAN_TSR_TERR2_Pos) /*!< 0x00080000 */ -#define CAN_TSR_TERR2 CAN_TSR_TERR2_Msk /*!< Transmission Error of Mailbox 2 */ -#define CAN_TSR_ABRQ2_Pos (23U) -#define CAN_TSR_ABRQ2_Msk (0x1U << CAN_TSR_ABRQ2_Pos) /*!< 0x00800000 */ -#define CAN_TSR_ABRQ2 CAN_TSR_ABRQ2_Msk /*!< Abort Request for Mailbox 2 */ -#define CAN_TSR_CODE_Pos (24U) -#define CAN_TSR_CODE_Msk (0x3U << CAN_TSR_CODE_Pos) /*!< 0x03000000 */ -#define CAN_TSR_CODE CAN_TSR_CODE_Msk /*!< Mailbox Code */ - -#define CAN_TSR_TME_Pos (26U) -#define CAN_TSR_TME_Msk (0x7U << CAN_TSR_TME_Pos) /*!< 0x1C000000 */ -#define CAN_TSR_TME CAN_TSR_TME_Msk /*!< TME[2:0] bits */ -#define CAN_TSR_TME0_Pos (26U) -#define CAN_TSR_TME0_Msk (0x1U << CAN_TSR_TME0_Pos) /*!< 0x04000000 */ -#define CAN_TSR_TME0 CAN_TSR_TME0_Msk /*!< Transmit Mailbox 0 Empty */ -#define CAN_TSR_TME1_Pos (27U) -#define CAN_TSR_TME1_Msk (0x1U << CAN_TSR_TME1_Pos) /*!< 0x08000000 */ -#define CAN_TSR_TME1 CAN_TSR_TME1_Msk /*!< Transmit Mailbox 1 Empty */ -#define CAN_TSR_TME2_Pos (28U) -#define CAN_TSR_TME2_Msk (0x1U << CAN_TSR_TME2_Pos) /*!< 0x10000000 */ -#define CAN_TSR_TME2 CAN_TSR_TME2_Msk /*!< Transmit Mailbox 2 Empty */ - -#define CAN_TSR_LOW_Pos (29U) -#define CAN_TSR_LOW_Msk (0x7U << CAN_TSR_LOW_Pos) /*!< 0xE0000000 */ -#define CAN_TSR_LOW CAN_TSR_LOW_Msk /*!< LOW[2:0] bits */ -#define CAN_TSR_LOW0_Pos (29U) -#define CAN_TSR_LOW0_Msk (0x1U << CAN_TSR_LOW0_Pos) /*!< 0x20000000 */ -#define CAN_TSR_LOW0 CAN_TSR_LOW0_Msk /*!< Lowest Priority Flag for Mailbox 0 */ -#define CAN_TSR_LOW1_Pos (30U) -#define CAN_TSR_LOW1_Msk (0x1U << CAN_TSR_LOW1_Pos) /*!< 0x40000000 */ -#define CAN_TSR_LOW1 CAN_TSR_LOW1_Msk /*!< Lowest Priority Flag for Mailbox 1 */ -#define CAN_TSR_LOW2_Pos (31U) -#define CAN_TSR_LOW2_Msk (0x1U << CAN_TSR_LOW2_Pos) /*!< 0x80000000 */ -#define CAN_TSR_LOW2 CAN_TSR_LOW2_Msk /*!< Lowest Priority Flag for Mailbox 2 */ - -/******************* Bit definition for CAN_RF0R register *******************/ -#define CAN_RF0R_FMP0_Pos (0U) -#define CAN_RF0R_FMP0_Msk (0x3U << CAN_RF0R_FMP0_Pos) /*!< 0x00000003 */ -#define CAN_RF0R_FMP0 CAN_RF0R_FMP0_Msk /*!< FIFO 0 Message Pending */ -#define CAN_RF0R_FULL0_Pos (3U) -#define CAN_RF0R_FULL0_Msk (0x1U << CAN_RF0R_FULL0_Pos) /*!< 0x00000008 */ -#define CAN_RF0R_FULL0 CAN_RF0R_FULL0_Msk /*!< FIFO 0 Full */ -#define CAN_RF0R_FOVR0_Pos (4U) -#define CAN_RF0R_FOVR0_Msk (0x1U << CAN_RF0R_FOVR0_Pos) /*!< 0x00000010 */ -#define CAN_RF0R_FOVR0 CAN_RF0R_FOVR0_Msk /*!< FIFO 0 Overrun */ -#define CAN_RF0R_RFOM0_Pos (5U) -#define CAN_RF0R_RFOM0_Msk (0x1U << CAN_RF0R_RFOM0_Pos) /*!< 0x00000020 */ -#define CAN_RF0R_RFOM0 CAN_RF0R_RFOM0_Msk /*!< Release FIFO 0 Output Mailbox */ - -/******************* Bit definition for CAN_RF1R register *******************/ -#define CAN_RF1R_FMP1_Pos (0U) -#define CAN_RF1R_FMP1_Msk (0x3U << CAN_RF1R_FMP1_Pos) /*!< 0x00000003 */ -#define CAN_RF1R_FMP1 CAN_RF1R_FMP1_Msk /*!< FIFO 1 Message Pending */ -#define CAN_RF1R_FULL1_Pos (3U) -#define CAN_RF1R_FULL1_Msk (0x1U << CAN_RF1R_FULL1_Pos) /*!< 0x00000008 */ -#define CAN_RF1R_FULL1 CAN_RF1R_FULL1_Msk /*!< FIFO 1 Full */ -#define CAN_RF1R_FOVR1_Pos (4U) -#define CAN_RF1R_FOVR1_Msk (0x1U << CAN_RF1R_FOVR1_Pos) /*!< 0x00000010 */ -#define CAN_RF1R_FOVR1 CAN_RF1R_FOVR1_Msk /*!< FIFO 1 Overrun */ -#define CAN_RF1R_RFOM1_Pos (5U) -#define CAN_RF1R_RFOM1_Msk (0x1U << CAN_RF1R_RFOM1_Pos) /*!< 0x00000020 */ -#define CAN_RF1R_RFOM1 CAN_RF1R_RFOM1_Msk /*!< Release FIFO 1 Output Mailbox */ - -/******************** Bit definition for CAN_IER register *******************/ -#define CAN_IER_TMEIE_Pos (0U) -#define CAN_IER_TMEIE_Msk (0x1U << CAN_IER_TMEIE_Pos) /*!< 0x00000001 */ -#define CAN_IER_TMEIE CAN_IER_TMEIE_Msk /*!< Transmit Mailbox Empty Interrupt Enable */ -#define CAN_IER_FMPIE0_Pos (1U) -#define CAN_IER_FMPIE0_Msk (0x1U << CAN_IER_FMPIE0_Pos) /*!< 0x00000002 */ -#define CAN_IER_FMPIE0 CAN_IER_FMPIE0_Msk /*!< FIFO Message Pending Interrupt Enable */ -#define CAN_IER_FFIE0_Pos (2U) -#define CAN_IER_FFIE0_Msk (0x1U << CAN_IER_FFIE0_Pos) /*!< 0x00000004 */ -#define CAN_IER_FFIE0 CAN_IER_FFIE0_Msk /*!< FIFO Full Interrupt Enable */ -#define CAN_IER_FOVIE0_Pos (3U) -#define CAN_IER_FOVIE0_Msk (0x1U << CAN_IER_FOVIE0_Pos) /*!< 0x00000008 */ -#define CAN_IER_FOVIE0 CAN_IER_FOVIE0_Msk /*!< FIFO Overrun Interrupt Enable */ -#define CAN_IER_FMPIE1_Pos (4U) -#define CAN_IER_FMPIE1_Msk (0x1U << CAN_IER_FMPIE1_Pos) /*!< 0x00000010 */ -#define CAN_IER_FMPIE1 CAN_IER_FMPIE1_Msk /*!< FIFO Message Pending Interrupt Enable */ -#define CAN_IER_FFIE1_Pos (5U) -#define CAN_IER_FFIE1_Msk (0x1U << CAN_IER_FFIE1_Pos) /*!< 0x00000020 */ -#define CAN_IER_FFIE1 CAN_IER_FFIE1_Msk /*!< FIFO Full Interrupt Enable */ -#define CAN_IER_FOVIE1_Pos (6U) -#define CAN_IER_FOVIE1_Msk (0x1U << CAN_IER_FOVIE1_Pos) /*!< 0x00000040 */ -#define CAN_IER_FOVIE1 CAN_IER_FOVIE1_Msk /*!< FIFO Overrun Interrupt Enable */ -#define CAN_IER_EWGIE_Pos (8U) -#define CAN_IER_EWGIE_Msk (0x1U << CAN_IER_EWGIE_Pos) /*!< 0x00000100 */ -#define CAN_IER_EWGIE CAN_IER_EWGIE_Msk /*!< Error Warning Interrupt Enable */ -#define CAN_IER_EPVIE_Pos (9U) -#define CAN_IER_EPVIE_Msk (0x1U << CAN_IER_EPVIE_Pos) /*!< 0x00000200 */ -#define CAN_IER_EPVIE CAN_IER_EPVIE_Msk /*!< Error Passive Interrupt Enable */ -#define CAN_IER_BOFIE_Pos (10U) -#define CAN_IER_BOFIE_Msk (0x1U << CAN_IER_BOFIE_Pos) /*!< 0x00000400 */ -#define CAN_IER_BOFIE CAN_IER_BOFIE_Msk /*!< Bus-Off Interrupt Enable */ -#define CAN_IER_LECIE_Pos (11U) -#define CAN_IER_LECIE_Msk (0x1U << CAN_IER_LECIE_Pos) /*!< 0x00000800 */ -#define CAN_IER_LECIE CAN_IER_LECIE_Msk /*!< Last Error Code Interrupt Enable */ -#define CAN_IER_ERRIE_Pos (15U) -#define CAN_IER_ERRIE_Msk (0x1U << CAN_IER_ERRIE_Pos) /*!< 0x00008000 */ -#define CAN_IER_ERRIE CAN_IER_ERRIE_Msk /*!< Error Interrupt Enable */ -#define CAN_IER_WKUIE_Pos (16U) -#define CAN_IER_WKUIE_Msk (0x1U << CAN_IER_WKUIE_Pos) /*!< 0x00010000 */ -#define CAN_IER_WKUIE CAN_IER_WKUIE_Msk /*!< Wakeup Interrupt Enable */ -#define CAN_IER_SLKIE_Pos (17U) -#define CAN_IER_SLKIE_Msk (0x1U << CAN_IER_SLKIE_Pos) /*!< 0x00020000 */ -#define CAN_IER_SLKIE CAN_IER_SLKIE_Msk /*!< Sleep Interrupt Enable */ - -/******************** Bit definition for CAN_ESR register *******************/ -#define CAN_ESR_EWGF_Pos (0U) -#define CAN_ESR_EWGF_Msk (0x1U << CAN_ESR_EWGF_Pos) /*!< 0x00000001 */ -#define CAN_ESR_EWGF CAN_ESR_EWGF_Msk /*!< Error Warning Flag */ -#define CAN_ESR_EPVF_Pos (1U) -#define CAN_ESR_EPVF_Msk (0x1U << CAN_ESR_EPVF_Pos) /*!< 0x00000002 */ -#define CAN_ESR_EPVF CAN_ESR_EPVF_Msk /*!< Error Passive Flag */ -#define CAN_ESR_BOFF_Pos (2U) -#define CAN_ESR_BOFF_Msk (0x1U << CAN_ESR_BOFF_Pos) /*!< 0x00000004 */ -#define CAN_ESR_BOFF CAN_ESR_BOFF_Msk /*!< Bus-Off Flag */ - -#define CAN_ESR_LEC_Pos (4U) -#define CAN_ESR_LEC_Msk (0x7U << CAN_ESR_LEC_Pos) /*!< 0x00000070 */ -#define CAN_ESR_LEC CAN_ESR_LEC_Msk /*!< LEC[2:0] bits (Last Error Code) */ -#define CAN_ESR_LEC_0 (0x1U << CAN_ESR_LEC_Pos) /*!< 0x00000010 */ -#define CAN_ESR_LEC_1 (0x2U << CAN_ESR_LEC_Pos) /*!< 0x00000020 */ -#define CAN_ESR_LEC_2 (0x4U << CAN_ESR_LEC_Pos) /*!< 0x00000040 */ - -#define CAN_ESR_TEC_Pos (16U) -#define CAN_ESR_TEC_Msk (0xFFU << CAN_ESR_TEC_Pos) /*!< 0x00FF0000 */ -#define CAN_ESR_TEC CAN_ESR_TEC_Msk /*!< Least significant byte of the 9-bit Transmit Error Counter */ -#define CAN_ESR_REC_Pos (24U) -#define CAN_ESR_REC_Msk (0xFFU << CAN_ESR_REC_Pos) /*!< 0xFF000000 */ -#define CAN_ESR_REC CAN_ESR_REC_Msk /*!< Receive Error Counter */ - -/******************* Bit definition for CAN_BTR register ********************/ -#define CAN_BTR_BRP_Pos (0U) -#define CAN_BTR_BRP_Msk (0x3FFU << CAN_BTR_BRP_Pos) /*!< 0x000003FF */ -#define CAN_BTR_BRP CAN_BTR_BRP_Msk /*!<Baud Rate Prescaler */ -#define CAN_BTR_TS1_Pos (16U) -#define CAN_BTR_TS1_Msk (0xFU << CAN_BTR_TS1_Pos) /*!< 0x000F0000 */ -#define CAN_BTR_TS1 CAN_BTR_TS1_Msk /*!<Time Segment 1 */ -#define CAN_BTR_TS1_0 (0x1U << CAN_BTR_TS1_Pos) /*!< 0x00010000 */ -#define CAN_BTR_TS1_1 (0x2U << CAN_BTR_TS1_Pos) /*!< 0x00020000 */ -#define CAN_BTR_TS1_2 (0x4U << CAN_BTR_TS1_Pos) /*!< 0x00040000 */ -#define CAN_BTR_TS1_3 (0x8U << CAN_BTR_TS1_Pos) /*!< 0x00080000 */ -#define CAN_BTR_TS2_Pos (20U) -#define CAN_BTR_TS2_Msk (0x7U << CAN_BTR_TS2_Pos) /*!< 0x00700000 */ -#define CAN_BTR_TS2 CAN_BTR_TS2_Msk /*!<Time Segment 2 */ -#define CAN_BTR_TS2_0 (0x1U << CAN_BTR_TS2_Pos) /*!< 0x00100000 */ -#define CAN_BTR_TS2_1 (0x2U << CAN_BTR_TS2_Pos) /*!< 0x00200000 */ -#define CAN_BTR_TS2_2 (0x4U << CAN_BTR_TS2_Pos) /*!< 0x00400000 */ -#define CAN_BTR_SJW_Pos (24U) -#define CAN_BTR_SJW_Msk (0x3U << CAN_BTR_SJW_Pos) /*!< 0x03000000 */ -#define CAN_BTR_SJW CAN_BTR_SJW_Msk /*!<Resynchronization Jump Width */ -#define CAN_BTR_SJW_0 (0x1U << CAN_BTR_SJW_Pos) /*!< 0x01000000 */ -#define CAN_BTR_SJW_1 (0x2U << CAN_BTR_SJW_Pos) /*!< 0x02000000 */ -#define CAN_BTR_LBKM_Pos (30U) -#define CAN_BTR_LBKM_Msk (0x1U << CAN_BTR_LBKM_Pos) /*!< 0x40000000 */ -#define CAN_BTR_LBKM CAN_BTR_LBKM_Msk /*!<Loop Back Mode (Debug) */ -#define CAN_BTR_SILM_Pos (31U) -#define CAN_BTR_SILM_Msk (0x1U << CAN_BTR_SILM_Pos) /*!< 0x80000000 */ -#define CAN_BTR_SILM CAN_BTR_SILM_Msk /*!<Silent Mode */ - -/*!< Mailbox registers */ -/****************** Bit definition for CAN_TI0R register ********************/ -#define CAN_TI0R_TXRQ_Pos (0U) -#define CAN_TI0R_TXRQ_Msk (0x1U << CAN_TI0R_TXRQ_Pos) /*!< 0x00000001 */ -#define CAN_TI0R_TXRQ CAN_TI0R_TXRQ_Msk /*!< Transmit Mailbox Request */ -#define CAN_TI0R_RTR_Pos (1U) -#define CAN_TI0R_RTR_Msk (0x1U << CAN_TI0R_RTR_Pos) /*!< 0x00000002 */ -#define CAN_TI0R_RTR CAN_TI0R_RTR_Msk /*!< Remote Transmission Request */ -#define CAN_TI0R_IDE_Pos (2U) -#define CAN_TI0R_IDE_Msk (0x1U << CAN_TI0R_IDE_Pos) /*!< 0x00000004 */ -#define CAN_TI0R_IDE CAN_TI0R_IDE_Msk /*!< Identifier Extension */ -#define CAN_TI0R_EXID_Pos (3U) -#define CAN_TI0R_EXID_Msk (0x3FFFFU << CAN_TI0R_EXID_Pos) /*!< 0x001FFFF8 */ -#define CAN_TI0R_EXID CAN_TI0R_EXID_Msk /*!< Extended Identifier */ -#define CAN_TI0R_STID_Pos (21U) -#define CAN_TI0R_STID_Msk (0x7FFU << CAN_TI0R_STID_Pos) /*!< 0xFFE00000 */ -#define CAN_TI0R_STID CAN_TI0R_STID_Msk /*!< Standard Identifier or Extended Identifier */ - -/****************** Bit definition for CAN_TDT0R register *******************/ -#define CAN_TDT0R_DLC_Pos (0U) -#define CAN_TDT0R_DLC_Msk (0xFU << CAN_TDT0R_DLC_Pos) /*!< 0x0000000F */ -#define CAN_TDT0R_DLC CAN_TDT0R_DLC_Msk /*!< Data Length Code */ -#define CAN_TDT0R_TGT_Pos (8U) -#define CAN_TDT0R_TGT_Msk (0x1U << CAN_TDT0R_TGT_Pos) /*!< 0x00000100 */ -#define CAN_TDT0R_TGT CAN_TDT0R_TGT_Msk /*!< Transmit Global Time */ -#define CAN_TDT0R_TIME_Pos (16U) -#define CAN_TDT0R_TIME_Msk (0xFFFFU << CAN_TDT0R_TIME_Pos) /*!< 0xFFFF0000 */ -#define CAN_TDT0R_TIME CAN_TDT0R_TIME_Msk /*!< Message Time Stamp */ - -/****************** Bit definition for CAN_TDL0R register *******************/ -#define CAN_TDL0R_DATA0_Pos (0U) -#define CAN_TDL0R_DATA0_Msk (0xFFU << CAN_TDL0R_DATA0_Pos) /*!< 0x000000FF */ -#define CAN_TDL0R_DATA0 CAN_TDL0R_DATA0_Msk /*!< Data byte 0 */ -#define CAN_TDL0R_DATA1_Pos (8U) -#define CAN_TDL0R_DATA1_Msk (0xFFU << CAN_TDL0R_DATA1_Pos) /*!< 0x0000FF00 */ -#define CAN_TDL0R_DATA1 CAN_TDL0R_DATA1_Msk /*!< Data byte 1 */ -#define CAN_TDL0R_DATA2_Pos (16U) -#define CAN_TDL0R_DATA2_Msk (0xFFU << CAN_TDL0R_DATA2_Pos) /*!< 0x00FF0000 */ -#define CAN_TDL0R_DATA2 CAN_TDL0R_DATA2_Msk /*!< Data byte 2 */ -#define CAN_TDL0R_DATA3_Pos (24U) -#define CAN_TDL0R_DATA3_Msk (0xFFU << CAN_TDL0R_DATA3_Pos) /*!< 0xFF000000 */ -#define CAN_TDL0R_DATA3 CAN_TDL0R_DATA3_Msk /*!< Data byte 3 */ - -/****************** Bit definition for CAN_TDH0R register *******************/ -#define CAN_TDH0R_DATA4_Pos (0U) -#define CAN_TDH0R_DATA4_Msk (0xFFU << CAN_TDH0R_DATA4_Pos) /*!< 0x000000FF */ -#define CAN_TDH0R_DATA4 CAN_TDH0R_DATA4_Msk /*!< Data byte 4 */ -#define CAN_TDH0R_DATA5_Pos (8U) -#define CAN_TDH0R_DATA5_Msk (0xFFU << CAN_TDH0R_DATA5_Pos) /*!< 0x0000FF00 */ -#define CAN_TDH0R_DATA5 CAN_TDH0R_DATA5_Msk /*!< Data byte 5 */ -#define CAN_TDH0R_DATA6_Pos (16U) -#define CAN_TDH0R_DATA6_Msk (0xFFU << CAN_TDH0R_DATA6_Pos) /*!< 0x00FF0000 */ -#define CAN_TDH0R_DATA6 CAN_TDH0R_DATA6_Msk /*!< Data byte 6 */ -#define CAN_TDH0R_DATA7_Pos (24U) -#define CAN_TDH0R_DATA7_Msk (0xFFU << CAN_TDH0R_DATA7_Pos) /*!< 0xFF000000 */ -#define CAN_TDH0R_DATA7 CAN_TDH0R_DATA7_Msk /*!< Data byte 7 */ - -/******************* Bit definition for CAN_TI1R register *******************/ -#define CAN_TI1R_TXRQ_Pos (0U) -#define CAN_TI1R_TXRQ_Msk (0x1U << CAN_TI1R_TXRQ_Pos) /*!< 0x00000001 */ -#define CAN_TI1R_TXRQ CAN_TI1R_TXRQ_Msk /*!< Transmit Mailbox Request */ -#define CAN_TI1R_RTR_Pos (1U) -#define CAN_TI1R_RTR_Msk (0x1U << CAN_TI1R_RTR_Pos) /*!< 0x00000002 */ -#define CAN_TI1R_RTR CAN_TI1R_RTR_Msk /*!< Remote Transmission Request */ -#define CAN_TI1R_IDE_Pos (2U) -#define CAN_TI1R_IDE_Msk (0x1U << CAN_TI1R_IDE_Pos) /*!< 0x00000004 */ -#define CAN_TI1R_IDE CAN_TI1R_IDE_Msk /*!< Identifier Extension */ -#define CAN_TI1R_EXID_Pos (3U) -#define CAN_TI1R_EXID_Msk (0x3FFFFU << CAN_TI1R_EXID_Pos) /*!< 0x001FFFF8 */ -#define CAN_TI1R_EXID CAN_TI1R_EXID_Msk /*!< Extended Identifier */ -#define CAN_TI1R_STID_Pos (21U) -#define CAN_TI1R_STID_Msk (0x7FFU << CAN_TI1R_STID_Pos) /*!< 0xFFE00000 */ -#define CAN_TI1R_STID CAN_TI1R_STID_Msk /*!< Standard Identifier or Extended Identifier */ - -/******************* Bit definition for CAN_TDT1R register ******************/ -#define CAN_TDT1R_DLC_Pos (0U) -#define CAN_TDT1R_DLC_Msk (0xFU << CAN_TDT1R_DLC_Pos) /*!< 0x0000000F */ -#define CAN_TDT1R_DLC CAN_TDT1R_DLC_Msk /*!< Data Length Code */ -#define CAN_TDT1R_TGT_Pos (8U) -#define CAN_TDT1R_TGT_Msk (0x1U << CAN_TDT1R_TGT_Pos) /*!< 0x00000100 */ -#define CAN_TDT1R_TGT CAN_TDT1R_TGT_Msk /*!< Transmit Global Time */ -#define CAN_TDT1R_TIME_Pos (16U) -#define CAN_TDT1R_TIME_Msk (0xFFFFU << CAN_TDT1R_TIME_Pos) /*!< 0xFFFF0000 */ -#define CAN_TDT1R_TIME CAN_TDT1R_TIME_Msk /*!< Message Time Stamp */ - -/******************* Bit definition for CAN_TDL1R register ******************/ -#define CAN_TDL1R_DATA0_Pos (0U) -#define CAN_TDL1R_DATA0_Msk (0xFFU << CAN_TDL1R_DATA0_Pos) /*!< 0x000000FF */ -#define CAN_TDL1R_DATA0 CAN_TDL1R_DATA0_Msk /*!< Data byte 0 */ -#define CAN_TDL1R_DATA1_Pos (8U) -#define CAN_TDL1R_DATA1_Msk (0xFFU << CAN_TDL1R_DATA1_Pos) /*!< 0x0000FF00 */ -#define CAN_TDL1R_DATA1 CAN_TDL1R_DATA1_Msk /*!< Data byte 1 */ -#define CAN_TDL1R_DATA2_Pos (16U) -#define CAN_TDL1R_DATA2_Msk (0xFFU << CAN_TDL1R_DATA2_Pos) /*!< 0x00FF0000 */ -#define CAN_TDL1R_DATA2 CAN_TDL1R_DATA2_Msk /*!< Data byte 2 */ -#define CAN_TDL1R_DATA3_Pos (24U) -#define CAN_TDL1R_DATA3_Msk (0xFFU << CAN_TDL1R_DATA3_Pos) /*!< 0xFF000000 */ -#define CAN_TDL1R_DATA3 CAN_TDL1R_DATA3_Msk /*!< Data byte 3 */ - -/******************* Bit definition for CAN_TDH1R register ******************/ -#define CAN_TDH1R_DATA4_Pos (0U) -#define CAN_TDH1R_DATA4_Msk (0xFFU << CAN_TDH1R_DATA4_Pos) /*!< 0x000000FF */ -#define CAN_TDH1R_DATA4 CAN_TDH1R_DATA4_Msk /*!< Data byte 4 */ -#define CAN_TDH1R_DATA5_Pos (8U) -#define CAN_TDH1R_DATA5_Msk (0xFFU << CAN_TDH1R_DATA5_Pos) /*!< 0x0000FF00 */ -#define CAN_TDH1R_DATA5 CAN_TDH1R_DATA5_Msk /*!< Data byte 5 */ -#define CAN_TDH1R_DATA6_Pos (16U) -#define CAN_TDH1R_DATA6_Msk (0xFFU << CAN_TDH1R_DATA6_Pos) /*!< 0x00FF0000 */ -#define CAN_TDH1R_DATA6 CAN_TDH1R_DATA6_Msk /*!< Data byte 6 */ -#define CAN_TDH1R_DATA7_Pos (24U) -#define CAN_TDH1R_DATA7_Msk (0xFFU << CAN_TDH1R_DATA7_Pos) /*!< 0xFF000000 */ -#define CAN_TDH1R_DATA7 CAN_TDH1R_DATA7_Msk /*!< Data byte 7 */ - -/******************* Bit definition for CAN_TI2R register *******************/ -#define CAN_TI2R_TXRQ_Pos (0U) -#define CAN_TI2R_TXRQ_Msk (0x1U << CAN_TI2R_TXRQ_Pos) /*!< 0x00000001 */ -#define CAN_TI2R_TXRQ CAN_TI2R_TXRQ_Msk /*!< Transmit Mailbox Request */ -#define CAN_TI2R_RTR_Pos (1U) -#define CAN_TI2R_RTR_Msk (0x1U << CAN_TI2R_RTR_Pos) /*!< 0x00000002 */ -#define CAN_TI2R_RTR CAN_TI2R_RTR_Msk /*!< Remote Transmission Request */ -#define CAN_TI2R_IDE_Pos (2U) -#define CAN_TI2R_IDE_Msk (0x1U << CAN_TI2R_IDE_Pos) /*!< 0x00000004 */ -#define CAN_TI2R_IDE CAN_TI2R_IDE_Msk /*!< Identifier Extension */ -#define CAN_TI2R_EXID_Pos (3U) -#define CAN_TI2R_EXID_Msk (0x3FFFFU << CAN_TI2R_EXID_Pos) /*!< 0x001FFFF8 */ -#define CAN_TI2R_EXID CAN_TI2R_EXID_Msk /*!< Extended identifier */ -#define CAN_TI2R_STID_Pos (21U) -#define CAN_TI2R_STID_Msk (0x7FFU << CAN_TI2R_STID_Pos) /*!< 0xFFE00000 */ -#define CAN_TI2R_STID CAN_TI2R_STID_Msk /*!< Standard Identifier or Extended Identifier */ - -/******************* Bit definition for CAN_TDT2R register ******************/ -#define CAN_TDT2R_DLC_Pos (0U) -#define CAN_TDT2R_DLC_Msk (0xFU << CAN_TDT2R_DLC_Pos) /*!< 0x0000000F */ -#define CAN_TDT2R_DLC CAN_TDT2R_DLC_Msk /*!< Data Length Code */ -#define CAN_TDT2R_TGT_Pos (8U) -#define CAN_TDT2R_TGT_Msk (0x1U << CAN_TDT2R_TGT_Pos) /*!< 0x00000100 */ -#define CAN_TDT2R_TGT CAN_TDT2R_TGT_Msk /*!< Transmit Global Time */ -#define CAN_TDT2R_TIME_Pos (16U) -#define CAN_TDT2R_TIME_Msk (0xFFFFU << CAN_TDT2R_TIME_Pos) /*!< 0xFFFF0000 */ -#define CAN_TDT2R_TIME CAN_TDT2R_TIME_Msk /*!< Message Time Stamp */ - -/******************* Bit definition for CAN_TDL2R register ******************/ -#define CAN_TDL2R_DATA0_Pos (0U) -#define CAN_TDL2R_DATA0_Msk (0xFFU << CAN_TDL2R_DATA0_Pos) /*!< 0x000000FF */ -#define CAN_TDL2R_DATA0 CAN_TDL2R_DATA0_Msk /*!< Data byte 0 */ -#define CAN_TDL2R_DATA1_Pos (8U) -#define CAN_TDL2R_DATA1_Msk (0xFFU << CAN_TDL2R_DATA1_Pos) /*!< 0x0000FF00 */ -#define CAN_TDL2R_DATA1 CAN_TDL2R_DATA1_Msk /*!< Data byte 1 */ -#define CAN_TDL2R_DATA2_Pos (16U) -#define CAN_TDL2R_DATA2_Msk (0xFFU << CAN_TDL2R_DATA2_Pos) /*!< 0x00FF0000 */ -#define CAN_TDL2R_DATA2 CAN_TDL2R_DATA2_Msk /*!< Data byte 2 */ -#define CAN_TDL2R_DATA3_Pos (24U) -#define CAN_TDL2R_DATA3_Msk (0xFFU << CAN_TDL2R_DATA3_Pos) /*!< 0xFF000000 */ -#define CAN_TDL2R_DATA3 CAN_TDL2R_DATA3_Msk /*!< Data byte 3 */ - -/******************* Bit definition for CAN_TDH2R register ******************/ -#define CAN_TDH2R_DATA4_Pos (0U) -#define CAN_TDH2R_DATA4_Msk (0xFFU << CAN_TDH2R_DATA4_Pos) /*!< 0x000000FF */ -#define CAN_TDH2R_DATA4 CAN_TDH2R_DATA4_Msk /*!< Data byte 4 */ -#define CAN_TDH2R_DATA5_Pos (8U) -#define CAN_TDH2R_DATA5_Msk (0xFFU << CAN_TDH2R_DATA5_Pos) /*!< 0x0000FF00 */ -#define CAN_TDH2R_DATA5 CAN_TDH2R_DATA5_Msk /*!< Data byte 5 */ -#define CAN_TDH2R_DATA6_Pos (16U) -#define CAN_TDH2R_DATA6_Msk (0xFFU << CAN_TDH2R_DATA6_Pos) /*!< 0x00FF0000 */ -#define CAN_TDH2R_DATA6 CAN_TDH2R_DATA6_Msk /*!< Data byte 6 */ -#define CAN_TDH2R_DATA7_Pos (24U) -#define CAN_TDH2R_DATA7_Msk (0xFFU << CAN_TDH2R_DATA7_Pos) /*!< 0xFF000000 */ -#define CAN_TDH2R_DATA7 CAN_TDH2R_DATA7_Msk /*!< Data byte 7 */ - -/******************* Bit definition for CAN_RI0R register *******************/ -#define CAN_RI0R_RTR_Pos (1U) -#define CAN_RI0R_RTR_Msk (0x1U << CAN_RI0R_RTR_Pos) /*!< 0x00000002 */ -#define CAN_RI0R_RTR CAN_RI0R_RTR_Msk /*!< Remote Transmission Request */ -#define CAN_RI0R_IDE_Pos (2U) -#define CAN_RI0R_IDE_Msk (0x1U << CAN_RI0R_IDE_Pos) /*!< 0x00000004 */ -#define CAN_RI0R_IDE CAN_RI0R_IDE_Msk /*!< Identifier Extension */ -#define CAN_RI0R_EXID_Pos (3U) -#define CAN_RI0R_EXID_Msk (0x3FFFFU << CAN_RI0R_EXID_Pos) /*!< 0x001FFFF8 */ -#define CAN_RI0R_EXID CAN_RI0R_EXID_Msk /*!< Extended Identifier */ -#define CAN_RI0R_STID_Pos (21U) -#define CAN_RI0R_STID_Msk (0x7FFU << CAN_RI0R_STID_Pos) /*!< 0xFFE00000 */ -#define CAN_RI0R_STID CAN_RI0R_STID_Msk /*!< Standard Identifier or Extended Identifier */ - -/******************* Bit definition for CAN_RDT0R register ******************/ -#define CAN_RDT0R_DLC_Pos (0U) -#define CAN_RDT0R_DLC_Msk (0xFU << CAN_RDT0R_DLC_Pos) /*!< 0x0000000F */ -#define CAN_RDT0R_DLC CAN_RDT0R_DLC_Msk /*!< Data Length Code */ -#define CAN_RDT0R_FMI_Pos (8U) -#define CAN_RDT0R_FMI_Msk (0xFFU << CAN_RDT0R_FMI_Pos) /*!< 0x0000FF00 */ -#define CAN_RDT0R_FMI CAN_RDT0R_FMI_Msk /*!< Filter Match Index */ -#define CAN_RDT0R_TIME_Pos (16U) -#define CAN_RDT0R_TIME_Msk (0xFFFFU << CAN_RDT0R_TIME_Pos) /*!< 0xFFFF0000 */ -#define CAN_RDT0R_TIME CAN_RDT0R_TIME_Msk /*!< Message Time Stamp */ - -/******************* Bit definition for CAN_RDL0R register ******************/ -#define CAN_RDL0R_DATA0_Pos (0U) -#define CAN_RDL0R_DATA0_Msk (0xFFU << CAN_RDL0R_DATA0_Pos) /*!< 0x000000FF */ -#define CAN_RDL0R_DATA0 CAN_RDL0R_DATA0_Msk /*!< Data byte 0 */ -#define CAN_RDL0R_DATA1_Pos (8U) -#define CAN_RDL0R_DATA1_Msk (0xFFU << CAN_RDL0R_DATA1_Pos) /*!< 0x0000FF00 */ -#define CAN_RDL0R_DATA1 CAN_RDL0R_DATA1_Msk /*!< Data byte 1 */ -#define CAN_RDL0R_DATA2_Pos (16U) -#define CAN_RDL0R_DATA2_Msk (0xFFU << CAN_RDL0R_DATA2_Pos) /*!< 0x00FF0000 */ -#define CAN_RDL0R_DATA2 CAN_RDL0R_DATA2_Msk /*!< Data byte 2 */ -#define CAN_RDL0R_DATA3_Pos (24U) -#define CAN_RDL0R_DATA3_Msk (0xFFU << CAN_RDL0R_DATA3_Pos) /*!< 0xFF000000 */ -#define CAN_RDL0R_DATA3 CAN_RDL0R_DATA3_Msk /*!< Data byte 3 */ - -/******************* Bit definition for CAN_RDH0R register ******************/ -#define CAN_RDH0R_DATA4_Pos (0U) -#define CAN_RDH0R_DATA4_Msk (0xFFU << CAN_RDH0R_DATA4_Pos) /*!< 0x000000FF */ -#define CAN_RDH0R_DATA4 CAN_RDH0R_DATA4_Msk /*!< Data byte 4 */ -#define CAN_RDH0R_DATA5_Pos (8U) -#define CAN_RDH0R_DATA5_Msk (0xFFU << CAN_RDH0R_DATA5_Pos) /*!< 0x0000FF00 */ -#define CAN_RDH0R_DATA5 CAN_RDH0R_DATA5_Msk /*!< Data byte 5 */ -#define CAN_RDH0R_DATA6_Pos (16U) -#define CAN_RDH0R_DATA6_Msk (0xFFU << CAN_RDH0R_DATA6_Pos) /*!< 0x00FF0000 */ -#define CAN_RDH0R_DATA6 CAN_RDH0R_DATA6_Msk /*!< Data byte 6 */ -#define CAN_RDH0R_DATA7_Pos (24U) -#define CAN_RDH0R_DATA7_Msk (0xFFU << CAN_RDH0R_DATA7_Pos) /*!< 0xFF000000 */ -#define CAN_RDH0R_DATA7 CAN_RDH0R_DATA7_Msk /*!< Data byte 7 */ - -/******************* Bit definition for CAN_RI1R register *******************/ -#define CAN_RI1R_RTR_Pos (1U) -#define CAN_RI1R_RTR_Msk (0x1U << CAN_RI1R_RTR_Pos) /*!< 0x00000002 */ -#define CAN_RI1R_RTR CAN_RI1R_RTR_Msk /*!< Remote Transmission Request */ -#define CAN_RI1R_IDE_Pos (2U) -#define CAN_RI1R_IDE_Msk (0x1U << CAN_RI1R_IDE_Pos) /*!< 0x00000004 */ -#define CAN_RI1R_IDE CAN_RI1R_IDE_Msk /*!< Identifier Extension */ -#define CAN_RI1R_EXID_Pos (3U) -#define CAN_RI1R_EXID_Msk (0x3FFFFU << CAN_RI1R_EXID_Pos) /*!< 0x001FFFF8 */ -#define CAN_RI1R_EXID CAN_RI1R_EXID_Msk /*!< Extended identifier */ -#define CAN_RI1R_STID_Pos (21U) -#define CAN_RI1R_STID_Msk (0x7FFU << CAN_RI1R_STID_Pos) /*!< 0xFFE00000 */ -#define CAN_RI1R_STID CAN_RI1R_STID_Msk /*!< Standard Identifier or Extended Identifier */ - -/******************* Bit definition for CAN_RDT1R register ******************/ -#define CAN_RDT1R_DLC_Pos (0U) -#define CAN_RDT1R_DLC_Msk (0xFU << CAN_RDT1R_DLC_Pos) /*!< 0x0000000F */ -#define CAN_RDT1R_DLC CAN_RDT1R_DLC_Msk /*!< Data Length Code */ -#define CAN_RDT1R_FMI_Pos (8U) -#define CAN_RDT1R_FMI_Msk (0xFFU << CAN_RDT1R_FMI_Pos) /*!< 0x0000FF00 */ -#define CAN_RDT1R_FMI CAN_RDT1R_FMI_Msk /*!< Filter Match Index */ -#define CAN_RDT1R_TIME_Pos (16U) -#define CAN_RDT1R_TIME_Msk (0xFFFFU << CAN_RDT1R_TIME_Pos) /*!< 0xFFFF0000 */ -#define CAN_RDT1R_TIME CAN_RDT1R_TIME_Msk /*!< Message Time Stamp */ - -/******************* Bit definition for CAN_RDL1R register ******************/ -#define CAN_RDL1R_DATA0_Pos (0U) -#define CAN_RDL1R_DATA0_Msk (0xFFU << CAN_RDL1R_DATA0_Pos) /*!< 0x000000FF */ -#define CAN_RDL1R_DATA0 CAN_RDL1R_DATA0_Msk /*!< Data byte 0 */ -#define CAN_RDL1R_DATA1_Pos (8U) -#define CAN_RDL1R_DATA1_Msk (0xFFU << CAN_RDL1R_DATA1_Pos) /*!< 0x0000FF00 */ -#define CAN_RDL1R_DATA1 CAN_RDL1R_DATA1_Msk /*!< Data byte 1 */ -#define CAN_RDL1R_DATA2_Pos (16U) -#define CAN_RDL1R_DATA2_Msk (0xFFU << CAN_RDL1R_DATA2_Pos) /*!< 0x00FF0000 */ -#define CAN_RDL1R_DATA2 CAN_RDL1R_DATA2_Msk /*!< Data byte 2 */ -#define CAN_RDL1R_DATA3_Pos (24U) -#define CAN_RDL1R_DATA3_Msk (0xFFU << CAN_RDL1R_DATA3_Pos) /*!< 0xFF000000 */ -#define CAN_RDL1R_DATA3 CAN_RDL1R_DATA3_Msk /*!< Data byte 3 */ - -/******************* Bit definition for CAN_RDH1R register ******************/ -#define CAN_RDH1R_DATA4_Pos (0U) -#define CAN_RDH1R_DATA4_Msk (0xFFU << CAN_RDH1R_DATA4_Pos) /*!< 0x000000FF */ -#define CAN_RDH1R_DATA4 CAN_RDH1R_DATA4_Msk /*!< Data byte 4 */ -#define CAN_RDH1R_DATA5_Pos (8U) -#define CAN_RDH1R_DATA5_Msk (0xFFU << CAN_RDH1R_DATA5_Pos) /*!< 0x0000FF00 */ -#define CAN_RDH1R_DATA5 CAN_RDH1R_DATA5_Msk /*!< Data byte 5 */ -#define CAN_RDH1R_DATA6_Pos (16U) -#define CAN_RDH1R_DATA6_Msk (0xFFU << CAN_RDH1R_DATA6_Pos) /*!< 0x00FF0000 */ -#define CAN_RDH1R_DATA6 CAN_RDH1R_DATA6_Msk /*!< Data byte 6 */ -#define CAN_RDH1R_DATA7_Pos (24U) -#define CAN_RDH1R_DATA7_Msk (0xFFU << CAN_RDH1R_DATA7_Pos) /*!< 0xFF000000 */ -#define CAN_RDH1R_DATA7 CAN_RDH1R_DATA7_Msk /*!< Data byte 7 */ - -/*!< CAN filter registers */ -/******************* Bit definition for CAN_FMR register ********************/ -#define CAN_FMR_FINIT_Pos (0U) -#define CAN_FMR_FINIT_Msk (0x1U << CAN_FMR_FINIT_Pos) /*!< 0x00000001 */ -#define CAN_FMR_FINIT CAN_FMR_FINIT_Msk /*!< Filter Init Mode */ -#define CAN_FMR_CAN2SB_Pos (8U) -#define CAN_FMR_CAN2SB_Msk (0x3FU << CAN_FMR_CAN2SB_Pos) /*!< 0x00003F00 */ -#define CAN_FMR_CAN2SB CAN_FMR_CAN2SB_Msk /*!< CAN2 start bank */ - -/******************* Bit definition for CAN_FM1R register *******************/ -#define CAN_FM1R_FBM_Pos (0U) -#define CAN_FM1R_FBM_Msk (0x3FFFU << CAN_FM1R_FBM_Pos) /*!< 0x00003FFF */ -#define CAN_FM1R_FBM CAN_FM1R_FBM_Msk /*!< Filter Mode */ -#define CAN_FM1R_FBM0_Pos (0U) -#define CAN_FM1R_FBM0_Msk (0x1U << CAN_FM1R_FBM0_Pos) /*!< 0x00000001 */ -#define CAN_FM1R_FBM0 CAN_FM1R_FBM0_Msk /*!< Filter Init Mode for filter 0 */ -#define CAN_FM1R_FBM1_Pos (1U) -#define CAN_FM1R_FBM1_Msk (0x1U << CAN_FM1R_FBM1_Pos) /*!< 0x00000002 */ -#define CAN_FM1R_FBM1 CAN_FM1R_FBM1_Msk /*!< Filter Init Mode for filter 1 */ -#define CAN_FM1R_FBM2_Pos (2U) -#define CAN_FM1R_FBM2_Msk (0x1U << CAN_FM1R_FBM2_Pos) /*!< 0x00000004 */ -#define CAN_FM1R_FBM2 CAN_FM1R_FBM2_Msk /*!< Filter Init Mode for filter 2 */ -#define CAN_FM1R_FBM3_Pos (3U) -#define CAN_FM1R_FBM3_Msk (0x1U << CAN_FM1R_FBM3_Pos) /*!< 0x00000008 */ -#define CAN_FM1R_FBM3 CAN_FM1R_FBM3_Msk /*!< Filter Init Mode for filter 3 */ -#define CAN_FM1R_FBM4_Pos (4U) -#define CAN_FM1R_FBM4_Msk (0x1U << CAN_FM1R_FBM4_Pos) /*!< 0x00000010 */ -#define CAN_FM1R_FBM4 CAN_FM1R_FBM4_Msk /*!< Filter Init Mode for filter 4 */ -#define CAN_FM1R_FBM5_Pos (5U) -#define CAN_FM1R_FBM5_Msk (0x1U << CAN_FM1R_FBM5_Pos) /*!< 0x00000020 */ -#define CAN_FM1R_FBM5 CAN_FM1R_FBM5_Msk /*!< Filter Init Mode for filter 5 */ -#define CAN_FM1R_FBM6_Pos (6U) -#define CAN_FM1R_FBM6_Msk (0x1U << CAN_FM1R_FBM6_Pos) /*!< 0x00000040 */ -#define CAN_FM1R_FBM6 CAN_FM1R_FBM6_Msk /*!< Filter Init Mode for filter 6 */ -#define CAN_FM1R_FBM7_Pos (7U) -#define CAN_FM1R_FBM7_Msk (0x1U << CAN_FM1R_FBM7_Pos) /*!< 0x00000080 */ -#define CAN_FM1R_FBM7 CAN_FM1R_FBM7_Msk /*!< Filter Init Mode for filter 7 */ -#define CAN_FM1R_FBM8_Pos (8U) -#define CAN_FM1R_FBM8_Msk (0x1U << CAN_FM1R_FBM8_Pos) /*!< 0x00000100 */ -#define CAN_FM1R_FBM8 CAN_FM1R_FBM8_Msk /*!< Filter Init Mode for filter 8 */ -#define CAN_FM1R_FBM9_Pos (9U) -#define CAN_FM1R_FBM9_Msk (0x1U << CAN_FM1R_FBM9_Pos) /*!< 0x00000200 */ -#define CAN_FM1R_FBM9 CAN_FM1R_FBM9_Msk /*!< Filter Init Mode for filter 9 */ -#define CAN_FM1R_FBM10_Pos (10U) -#define CAN_FM1R_FBM10_Msk (0x1U << CAN_FM1R_FBM10_Pos) /*!< 0x00000400 */ -#define CAN_FM1R_FBM10 CAN_FM1R_FBM10_Msk /*!< Filter Init Mode for filter 10 */ -#define CAN_FM1R_FBM11_Pos (11U) -#define CAN_FM1R_FBM11_Msk (0x1U << CAN_FM1R_FBM11_Pos) /*!< 0x00000800 */ -#define CAN_FM1R_FBM11 CAN_FM1R_FBM11_Msk /*!< Filter Init Mode for filter 11 */ -#define CAN_FM1R_FBM12_Pos (12U) -#define CAN_FM1R_FBM12_Msk (0x1U << CAN_FM1R_FBM12_Pos) /*!< 0x00001000 */ -#define CAN_FM1R_FBM12 CAN_FM1R_FBM12_Msk /*!< Filter Init Mode for filter 12 */ -#define CAN_FM1R_FBM13_Pos (13U) -#define CAN_FM1R_FBM13_Msk (0x1U << CAN_FM1R_FBM13_Pos) /*!< 0x00002000 */ -#define CAN_FM1R_FBM13 CAN_FM1R_FBM13_Msk /*!< Filter Init Mode for filter 13 */ - -/******************* Bit definition for CAN_FS1R register *******************/ -#define CAN_FS1R_FSC_Pos (0U) -#define CAN_FS1R_FSC_Msk (0x3FFFU << CAN_FS1R_FSC_Pos) /*!< 0x00003FFF */ -#define CAN_FS1R_FSC CAN_FS1R_FSC_Msk /*!< Filter Scale Configuration */ -#define CAN_FS1R_FSC0_Pos (0U) -#define CAN_FS1R_FSC0_Msk (0x1U << CAN_FS1R_FSC0_Pos) /*!< 0x00000001 */ -#define CAN_FS1R_FSC0 CAN_FS1R_FSC0_Msk /*!< Filter Scale Configuration for filter 0 */ -#define CAN_FS1R_FSC1_Pos (1U) -#define CAN_FS1R_FSC1_Msk (0x1U << CAN_FS1R_FSC1_Pos) /*!< 0x00000002 */ -#define CAN_FS1R_FSC1 CAN_FS1R_FSC1_Msk /*!< Filter Scale Configuration for filter 1 */ -#define CAN_FS1R_FSC2_Pos (2U) -#define CAN_FS1R_FSC2_Msk (0x1U << CAN_FS1R_FSC2_Pos) /*!< 0x00000004 */ -#define CAN_FS1R_FSC2 CAN_FS1R_FSC2_Msk /*!< Filter Scale Configuration for filter 2 */ -#define CAN_FS1R_FSC3_Pos (3U) -#define CAN_FS1R_FSC3_Msk (0x1U << CAN_FS1R_FSC3_Pos) /*!< 0x00000008 */ -#define CAN_FS1R_FSC3 CAN_FS1R_FSC3_Msk /*!< Filter Scale Configuration for filter 3 */ -#define CAN_FS1R_FSC4_Pos (4U) -#define CAN_FS1R_FSC4_Msk (0x1U << CAN_FS1R_FSC4_Pos) /*!< 0x00000010 */ -#define CAN_FS1R_FSC4 CAN_FS1R_FSC4_Msk /*!< Filter Scale Configuration for filter 4 */ -#define CAN_FS1R_FSC5_Pos (5U) -#define CAN_FS1R_FSC5_Msk (0x1U << CAN_FS1R_FSC5_Pos) /*!< 0x00000020 */ -#define CAN_FS1R_FSC5 CAN_FS1R_FSC5_Msk /*!< Filter Scale Configuration for filter 5 */ -#define CAN_FS1R_FSC6_Pos (6U) -#define CAN_FS1R_FSC6_Msk (0x1U << CAN_FS1R_FSC6_Pos) /*!< 0x00000040 */ -#define CAN_FS1R_FSC6 CAN_FS1R_FSC6_Msk /*!< Filter Scale Configuration for filter 6 */ -#define CAN_FS1R_FSC7_Pos (7U) -#define CAN_FS1R_FSC7_Msk (0x1U << CAN_FS1R_FSC7_Pos) /*!< 0x00000080 */ -#define CAN_FS1R_FSC7 CAN_FS1R_FSC7_Msk /*!< Filter Scale Configuration for filter 7 */ -#define CAN_FS1R_FSC8_Pos (8U) -#define CAN_FS1R_FSC8_Msk (0x1U << CAN_FS1R_FSC8_Pos) /*!< 0x00000100 */ -#define CAN_FS1R_FSC8 CAN_FS1R_FSC8_Msk /*!< Filter Scale Configuration for filter 8 */ -#define CAN_FS1R_FSC9_Pos (9U) -#define CAN_FS1R_FSC9_Msk (0x1U << CAN_FS1R_FSC9_Pos) /*!< 0x00000200 */ -#define CAN_FS1R_FSC9 CAN_FS1R_FSC9_Msk /*!< Filter Scale Configuration for filter 9 */ -#define CAN_FS1R_FSC10_Pos (10U) -#define CAN_FS1R_FSC10_Msk (0x1U << CAN_FS1R_FSC10_Pos) /*!< 0x00000400 */ -#define CAN_FS1R_FSC10 CAN_FS1R_FSC10_Msk /*!< Filter Scale Configuration for filter 10 */ -#define CAN_FS1R_FSC11_Pos (11U) -#define CAN_FS1R_FSC11_Msk (0x1U << CAN_FS1R_FSC11_Pos) /*!< 0x00000800 */ -#define CAN_FS1R_FSC11 CAN_FS1R_FSC11_Msk /*!< Filter Scale Configuration for filter 11 */ -#define CAN_FS1R_FSC12_Pos (12U) -#define CAN_FS1R_FSC12_Msk (0x1U << CAN_FS1R_FSC12_Pos) /*!< 0x00001000 */ -#define CAN_FS1R_FSC12 CAN_FS1R_FSC12_Msk /*!< Filter Scale Configuration for filter 12 */ -#define CAN_FS1R_FSC13_Pos (13U) -#define CAN_FS1R_FSC13_Msk (0x1U << CAN_FS1R_FSC13_Pos) /*!< 0x00002000 */ -#define CAN_FS1R_FSC13 CAN_FS1R_FSC13_Msk /*!< Filter Scale Configuration for filter 13 */ - -/****************** Bit definition for CAN_FFA1R register *******************/ -#define CAN_FFA1R_FFA_Pos (0U) -#define CAN_FFA1R_FFA_Msk (0x3FFFU << CAN_FFA1R_FFA_Pos) /*!< 0x00003FFF */ -#define CAN_FFA1R_FFA CAN_FFA1R_FFA_Msk /*!< Filter FIFO Assignment */ -#define CAN_FFA1R_FFA0_Pos (0U) -#define CAN_FFA1R_FFA0_Msk (0x1U << CAN_FFA1R_FFA0_Pos) /*!< 0x00000001 */ -#define CAN_FFA1R_FFA0 CAN_FFA1R_FFA0_Msk /*!< Filter FIFO Assignment for filter 0 */ -#define CAN_FFA1R_FFA1_Pos (1U) -#define CAN_FFA1R_FFA1_Msk (0x1U << CAN_FFA1R_FFA1_Pos) /*!< 0x00000002 */ -#define CAN_FFA1R_FFA1 CAN_FFA1R_FFA1_Msk /*!< Filter FIFO Assignment for filter 1 */ -#define CAN_FFA1R_FFA2_Pos (2U) -#define CAN_FFA1R_FFA2_Msk (0x1U << CAN_FFA1R_FFA2_Pos) /*!< 0x00000004 */ -#define CAN_FFA1R_FFA2 CAN_FFA1R_FFA2_Msk /*!< Filter FIFO Assignment for filter 2 */ -#define CAN_FFA1R_FFA3_Pos (3U) -#define CAN_FFA1R_FFA3_Msk (0x1U << CAN_FFA1R_FFA3_Pos) /*!< 0x00000008 */ -#define CAN_FFA1R_FFA3 CAN_FFA1R_FFA3_Msk /*!< Filter FIFO Assignment for filter 3 */ -#define CAN_FFA1R_FFA4_Pos (4U) -#define CAN_FFA1R_FFA4_Msk (0x1U << CAN_FFA1R_FFA4_Pos) /*!< 0x00000010 */ -#define CAN_FFA1R_FFA4 CAN_FFA1R_FFA4_Msk /*!< Filter FIFO Assignment for filter 4 */ -#define CAN_FFA1R_FFA5_Pos (5U) -#define CAN_FFA1R_FFA5_Msk (0x1U << CAN_FFA1R_FFA5_Pos) /*!< 0x00000020 */ -#define CAN_FFA1R_FFA5 CAN_FFA1R_FFA5_Msk /*!< Filter FIFO Assignment for filter 5 */ -#define CAN_FFA1R_FFA6_Pos (6U) -#define CAN_FFA1R_FFA6_Msk (0x1U << CAN_FFA1R_FFA6_Pos) /*!< 0x00000040 */ -#define CAN_FFA1R_FFA6 CAN_FFA1R_FFA6_Msk /*!< Filter FIFO Assignment for filter 6 */ -#define CAN_FFA1R_FFA7_Pos (7U) -#define CAN_FFA1R_FFA7_Msk (0x1U << CAN_FFA1R_FFA7_Pos) /*!< 0x00000080 */ -#define CAN_FFA1R_FFA7 CAN_FFA1R_FFA7_Msk /*!< Filter FIFO Assignment for filter 7 */ -#define CAN_FFA1R_FFA8_Pos (8U) -#define CAN_FFA1R_FFA8_Msk (0x1U << CAN_FFA1R_FFA8_Pos) /*!< 0x00000100 */ -#define CAN_FFA1R_FFA8 CAN_FFA1R_FFA8_Msk /*!< Filter FIFO Assignment for filter 8 */ -#define CAN_FFA1R_FFA9_Pos (9U) -#define CAN_FFA1R_FFA9_Msk (0x1U << CAN_FFA1R_FFA9_Pos) /*!< 0x00000200 */ -#define CAN_FFA1R_FFA9 CAN_FFA1R_FFA9_Msk /*!< Filter FIFO Assignment for filter 9 */ -#define CAN_FFA1R_FFA10_Pos (10U) -#define CAN_FFA1R_FFA10_Msk (0x1U << CAN_FFA1R_FFA10_Pos) /*!< 0x00000400 */ -#define CAN_FFA1R_FFA10 CAN_FFA1R_FFA10_Msk /*!< Filter FIFO Assignment for filter 10 */ -#define CAN_FFA1R_FFA11_Pos (11U) -#define CAN_FFA1R_FFA11_Msk (0x1U << CAN_FFA1R_FFA11_Pos) /*!< 0x00000800 */ -#define CAN_FFA1R_FFA11 CAN_FFA1R_FFA11_Msk /*!< Filter FIFO Assignment for filter 11 */ -#define CAN_FFA1R_FFA12_Pos (12U) -#define CAN_FFA1R_FFA12_Msk (0x1U << CAN_FFA1R_FFA12_Pos) /*!< 0x00001000 */ -#define CAN_FFA1R_FFA12 CAN_FFA1R_FFA12_Msk /*!< Filter FIFO Assignment for filter 12 */ -#define CAN_FFA1R_FFA13_Pos (13U) -#define CAN_FFA1R_FFA13_Msk (0x1U << CAN_FFA1R_FFA13_Pos) /*!< 0x00002000 */ -#define CAN_FFA1R_FFA13 CAN_FFA1R_FFA13_Msk /*!< Filter FIFO Assignment for filter 13 */ - -/******************* Bit definition for CAN_FA1R register *******************/ -#define CAN_FA1R_FACT_Pos (0U) -#define CAN_FA1R_FACT_Msk (0x3FFFU << CAN_FA1R_FACT_Pos) /*!< 0x00003FFF */ -#define CAN_FA1R_FACT CAN_FA1R_FACT_Msk /*!< Filter Active */ -#define CAN_FA1R_FACT0_Pos (0U) -#define CAN_FA1R_FACT0_Msk (0x1U << CAN_FA1R_FACT0_Pos) /*!< 0x00000001 */ -#define CAN_FA1R_FACT0 CAN_FA1R_FACT0_Msk /*!< Filter 0 Active */ -#define CAN_FA1R_FACT1_Pos (1U) -#define CAN_FA1R_FACT1_Msk (0x1U << CAN_FA1R_FACT1_Pos) /*!< 0x00000002 */ -#define CAN_FA1R_FACT1 CAN_FA1R_FACT1_Msk /*!< Filter 1 Active */ -#define CAN_FA1R_FACT2_Pos (2U) -#define CAN_FA1R_FACT2_Msk (0x1U << CAN_FA1R_FACT2_Pos) /*!< 0x00000004 */ -#define CAN_FA1R_FACT2 CAN_FA1R_FACT2_Msk /*!< Filter 2 Active */ -#define CAN_FA1R_FACT3_Pos (3U) -#define CAN_FA1R_FACT3_Msk (0x1U << CAN_FA1R_FACT3_Pos) /*!< 0x00000008 */ -#define CAN_FA1R_FACT3 CAN_FA1R_FACT3_Msk /*!< Filter 3 Active */ -#define CAN_FA1R_FACT4_Pos (4U) -#define CAN_FA1R_FACT4_Msk (0x1U << CAN_FA1R_FACT4_Pos) /*!< 0x00000010 */ -#define CAN_FA1R_FACT4 CAN_FA1R_FACT4_Msk /*!< Filter 4 Active */ -#define CAN_FA1R_FACT5_Pos (5U) -#define CAN_FA1R_FACT5_Msk (0x1U << CAN_FA1R_FACT5_Pos) /*!< 0x00000020 */ -#define CAN_FA1R_FACT5 CAN_FA1R_FACT5_Msk /*!< Filter 5 Active */ -#define CAN_FA1R_FACT6_Pos (6U) -#define CAN_FA1R_FACT6_Msk (0x1U << CAN_FA1R_FACT6_Pos) /*!< 0x00000040 */ -#define CAN_FA1R_FACT6 CAN_FA1R_FACT6_Msk /*!< Filter 6 Active */ -#define CAN_FA1R_FACT7_Pos (7U) -#define CAN_FA1R_FACT7_Msk (0x1U << CAN_FA1R_FACT7_Pos) /*!< 0x00000080 */ -#define CAN_FA1R_FACT7 CAN_FA1R_FACT7_Msk /*!< Filter 7 Active */ -#define CAN_FA1R_FACT8_Pos (8U) -#define CAN_FA1R_FACT8_Msk (0x1U << CAN_FA1R_FACT8_Pos) /*!< 0x00000100 */ -#define CAN_FA1R_FACT8 CAN_FA1R_FACT8_Msk /*!< Filter 8 Active */ -#define CAN_FA1R_FACT9_Pos (9U) -#define CAN_FA1R_FACT9_Msk (0x1U << CAN_FA1R_FACT9_Pos) /*!< 0x00000200 */ -#define CAN_FA1R_FACT9 CAN_FA1R_FACT9_Msk /*!< Filter 9 Active */ -#define CAN_FA1R_FACT10_Pos (10U) -#define CAN_FA1R_FACT10_Msk (0x1U << CAN_FA1R_FACT10_Pos) /*!< 0x00000400 */ -#define CAN_FA1R_FACT10 CAN_FA1R_FACT10_Msk /*!< Filter 10 Active */ -#define CAN_FA1R_FACT11_Pos (11U) -#define CAN_FA1R_FACT11_Msk (0x1U << CAN_FA1R_FACT11_Pos) /*!< 0x00000800 */ -#define CAN_FA1R_FACT11 CAN_FA1R_FACT11_Msk /*!< Filter 11 Active */ -#define CAN_FA1R_FACT12_Pos (12U) -#define CAN_FA1R_FACT12_Msk (0x1U << CAN_FA1R_FACT12_Pos) /*!< 0x00001000 */ -#define CAN_FA1R_FACT12 CAN_FA1R_FACT12_Msk /*!< Filter 12 Active */ -#define CAN_FA1R_FACT13_Pos (13U) -#define CAN_FA1R_FACT13_Msk (0x1U << CAN_FA1R_FACT13_Pos) /*!< 0x00002000 */ -#define CAN_FA1R_FACT13 CAN_FA1R_FACT13_Msk /*!< Filter 13 Active */ - -/******************* Bit definition for CAN_F0R1 register *******************/ -#define CAN_F0R1_FB0_Pos (0U) -#define CAN_F0R1_FB0_Msk (0x1U << CAN_F0R1_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F0R1_FB0 CAN_F0R1_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F0R1_FB1_Pos (1U) -#define CAN_F0R1_FB1_Msk (0x1U << CAN_F0R1_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F0R1_FB1 CAN_F0R1_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F0R1_FB2_Pos (2U) -#define CAN_F0R1_FB2_Msk (0x1U << CAN_F0R1_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F0R1_FB2 CAN_F0R1_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F0R1_FB3_Pos (3U) -#define CAN_F0R1_FB3_Msk (0x1U << CAN_F0R1_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F0R1_FB3 CAN_F0R1_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F0R1_FB4_Pos (4U) -#define CAN_F0R1_FB4_Msk (0x1U << CAN_F0R1_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F0R1_FB4 CAN_F0R1_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F0R1_FB5_Pos (5U) -#define CAN_F0R1_FB5_Msk (0x1U << CAN_F0R1_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F0R1_FB5 CAN_F0R1_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F0R1_FB6_Pos (6U) -#define CAN_F0R1_FB6_Msk (0x1U << CAN_F0R1_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F0R1_FB6 CAN_F0R1_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F0R1_FB7_Pos (7U) -#define CAN_F0R1_FB7_Msk (0x1U << CAN_F0R1_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F0R1_FB7 CAN_F0R1_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F0R1_FB8_Pos (8U) -#define CAN_F0R1_FB8_Msk (0x1U << CAN_F0R1_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F0R1_FB8 CAN_F0R1_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F0R1_FB9_Pos (9U) -#define CAN_F0R1_FB9_Msk (0x1U << CAN_F0R1_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F0R1_FB9 CAN_F0R1_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F0R1_FB10_Pos (10U) -#define CAN_F0R1_FB10_Msk (0x1U << CAN_F0R1_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F0R1_FB10 CAN_F0R1_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F0R1_FB11_Pos (11U) -#define CAN_F0R1_FB11_Msk (0x1U << CAN_F0R1_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F0R1_FB11 CAN_F0R1_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F0R1_FB12_Pos (12U) -#define CAN_F0R1_FB12_Msk (0x1U << CAN_F0R1_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F0R1_FB12 CAN_F0R1_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F0R1_FB13_Pos (13U) -#define CAN_F0R1_FB13_Msk (0x1U << CAN_F0R1_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F0R1_FB13 CAN_F0R1_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F0R1_FB14_Pos (14U) -#define CAN_F0R1_FB14_Msk (0x1U << CAN_F0R1_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F0R1_FB14 CAN_F0R1_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F0R1_FB15_Pos (15U) -#define CAN_F0R1_FB15_Msk (0x1U << CAN_F0R1_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F0R1_FB15 CAN_F0R1_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F0R1_FB16_Pos (16U) -#define CAN_F0R1_FB16_Msk (0x1U << CAN_F0R1_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F0R1_FB16 CAN_F0R1_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F0R1_FB17_Pos (17U) -#define CAN_F0R1_FB17_Msk (0x1U << CAN_F0R1_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F0R1_FB17 CAN_F0R1_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F0R1_FB18_Pos (18U) -#define CAN_F0R1_FB18_Msk (0x1U << CAN_F0R1_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F0R1_FB18 CAN_F0R1_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F0R1_FB19_Pos (19U) -#define CAN_F0R1_FB19_Msk (0x1U << CAN_F0R1_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F0R1_FB19 CAN_F0R1_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F0R1_FB20_Pos (20U) -#define CAN_F0R1_FB20_Msk (0x1U << CAN_F0R1_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F0R1_FB20 CAN_F0R1_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F0R1_FB21_Pos (21U) -#define CAN_F0R1_FB21_Msk (0x1U << CAN_F0R1_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F0R1_FB21 CAN_F0R1_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F0R1_FB22_Pos (22U) -#define CAN_F0R1_FB22_Msk (0x1U << CAN_F0R1_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F0R1_FB22 CAN_F0R1_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F0R1_FB23_Pos (23U) -#define CAN_F0R1_FB23_Msk (0x1U << CAN_F0R1_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F0R1_FB23 CAN_F0R1_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F0R1_FB24_Pos (24U) -#define CAN_F0R1_FB24_Msk (0x1U << CAN_F0R1_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F0R1_FB24 CAN_F0R1_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F0R1_FB25_Pos (25U) -#define CAN_F0R1_FB25_Msk (0x1U << CAN_F0R1_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F0R1_FB25 CAN_F0R1_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F0R1_FB26_Pos (26U) -#define CAN_F0R1_FB26_Msk (0x1U << CAN_F0R1_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F0R1_FB26 CAN_F0R1_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F0R1_FB27_Pos (27U) -#define CAN_F0R1_FB27_Msk (0x1U << CAN_F0R1_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F0R1_FB27 CAN_F0R1_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F0R1_FB28_Pos (28U) -#define CAN_F0R1_FB28_Msk (0x1U << CAN_F0R1_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F0R1_FB28 CAN_F0R1_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F0R1_FB29_Pos (29U) -#define CAN_F0R1_FB29_Msk (0x1U << CAN_F0R1_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F0R1_FB29 CAN_F0R1_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F0R1_FB30_Pos (30U) -#define CAN_F0R1_FB30_Msk (0x1U << CAN_F0R1_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F0R1_FB30 CAN_F0R1_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F0R1_FB31_Pos (31U) -#define CAN_F0R1_FB31_Msk (0x1U << CAN_F0R1_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F0R1_FB31 CAN_F0R1_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F1R1 register *******************/ -#define CAN_F1R1_FB0_Pos (0U) -#define CAN_F1R1_FB0_Msk (0x1U << CAN_F1R1_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F1R1_FB0 CAN_F1R1_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F1R1_FB1_Pos (1U) -#define CAN_F1R1_FB1_Msk (0x1U << CAN_F1R1_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F1R1_FB1 CAN_F1R1_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F1R1_FB2_Pos (2U) -#define CAN_F1R1_FB2_Msk (0x1U << CAN_F1R1_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F1R1_FB2 CAN_F1R1_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F1R1_FB3_Pos (3U) -#define CAN_F1R1_FB3_Msk (0x1U << CAN_F1R1_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F1R1_FB3 CAN_F1R1_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F1R1_FB4_Pos (4U) -#define CAN_F1R1_FB4_Msk (0x1U << CAN_F1R1_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F1R1_FB4 CAN_F1R1_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F1R1_FB5_Pos (5U) -#define CAN_F1R1_FB5_Msk (0x1U << CAN_F1R1_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F1R1_FB5 CAN_F1R1_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F1R1_FB6_Pos (6U) -#define CAN_F1R1_FB6_Msk (0x1U << CAN_F1R1_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F1R1_FB6 CAN_F1R1_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F1R1_FB7_Pos (7U) -#define CAN_F1R1_FB7_Msk (0x1U << CAN_F1R1_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F1R1_FB7 CAN_F1R1_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F1R1_FB8_Pos (8U) -#define CAN_F1R1_FB8_Msk (0x1U << CAN_F1R1_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F1R1_FB8 CAN_F1R1_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F1R1_FB9_Pos (9U) -#define CAN_F1R1_FB9_Msk (0x1U << CAN_F1R1_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F1R1_FB9 CAN_F1R1_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F1R1_FB10_Pos (10U) -#define CAN_F1R1_FB10_Msk (0x1U << CAN_F1R1_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F1R1_FB10 CAN_F1R1_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F1R1_FB11_Pos (11U) -#define CAN_F1R1_FB11_Msk (0x1U << CAN_F1R1_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F1R1_FB11 CAN_F1R1_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F1R1_FB12_Pos (12U) -#define CAN_F1R1_FB12_Msk (0x1U << CAN_F1R1_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F1R1_FB12 CAN_F1R1_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F1R1_FB13_Pos (13U) -#define CAN_F1R1_FB13_Msk (0x1U << CAN_F1R1_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F1R1_FB13 CAN_F1R1_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F1R1_FB14_Pos (14U) -#define CAN_F1R1_FB14_Msk (0x1U << CAN_F1R1_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F1R1_FB14 CAN_F1R1_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F1R1_FB15_Pos (15U) -#define CAN_F1R1_FB15_Msk (0x1U << CAN_F1R1_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F1R1_FB15 CAN_F1R1_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F1R1_FB16_Pos (16U) -#define CAN_F1R1_FB16_Msk (0x1U << CAN_F1R1_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F1R1_FB16 CAN_F1R1_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F1R1_FB17_Pos (17U) -#define CAN_F1R1_FB17_Msk (0x1U << CAN_F1R1_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F1R1_FB17 CAN_F1R1_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F1R1_FB18_Pos (18U) -#define CAN_F1R1_FB18_Msk (0x1U << CAN_F1R1_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F1R1_FB18 CAN_F1R1_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F1R1_FB19_Pos (19U) -#define CAN_F1R1_FB19_Msk (0x1U << CAN_F1R1_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F1R1_FB19 CAN_F1R1_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F1R1_FB20_Pos (20U) -#define CAN_F1R1_FB20_Msk (0x1U << CAN_F1R1_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F1R1_FB20 CAN_F1R1_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F1R1_FB21_Pos (21U) -#define CAN_F1R1_FB21_Msk (0x1U << CAN_F1R1_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F1R1_FB21 CAN_F1R1_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F1R1_FB22_Pos (22U) -#define CAN_F1R1_FB22_Msk (0x1U << CAN_F1R1_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F1R1_FB22 CAN_F1R1_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F1R1_FB23_Pos (23U) -#define CAN_F1R1_FB23_Msk (0x1U << CAN_F1R1_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F1R1_FB23 CAN_F1R1_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F1R1_FB24_Pos (24U) -#define CAN_F1R1_FB24_Msk (0x1U << CAN_F1R1_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F1R1_FB24 CAN_F1R1_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F1R1_FB25_Pos (25U) -#define CAN_F1R1_FB25_Msk (0x1U << CAN_F1R1_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F1R1_FB25 CAN_F1R1_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F1R1_FB26_Pos (26U) -#define CAN_F1R1_FB26_Msk (0x1U << CAN_F1R1_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F1R1_FB26 CAN_F1R1_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F1R1_FB27_Pos (27U) -#define CAN_F1R1_FB27_Msk (0x1U << CAN_F1R1_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F1R1_FB27 CAN_F1R1_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F1R1_FB28_Pos (28U) -#define CAN_F1R1_FB28_Msk (0x1U << CAN_F1R1_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F1R1_FB28 CAN_F1R1_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F1R1_FB29_Pos (29U) -#define CAN_F1R1_FB29_Msk (0x1U << CAN_F1R1_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F1R1_FB29 CAN_F1R1_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F1R1_FB30_Pos (30U) -#define CAN_F1R1_FB30_Msk (0x1U << CAN_F1R1_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F1R1_FB30 CAN_F1R1_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F1R1_FB31_Pos (31U) -#define CAN_F1R1_FB31_Msk (0x1U << CAN_F1R1_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F1R1_FB31 CAN_F1R1_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F2R1 register *******************/ -#define CAN_F2R1_FB0_Pos (0U) -#define CAN_F2R1_FB0_Msk (0x1U << CAN_F2R1_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F2R1_FB0 CAN_F2R1_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F2R1_FB1_Pos (1U) -#define CAN_F2R1_FB1_Msk (0x1U << CAN_F2R1_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F2R1_FB1 CAN_F2R1_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F2R1_FB2_Pos (2U) -#define CAN_F2R1_FB2_Msk (0x1U << CAN_F2R1_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F2R1_FB2 CAN_F2R1_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F2R1_FB3_Pos (3U) -#define CAN_F2R1_FB3_Msk (0x1U << CAN_F2R1_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F2R1_FB3 CAN_F2R1_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F2R1_FB4_Pos (4U) -#define CAN_F2R1_FB4_Msk (0x1U << CAN_F2R1_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F2R1_FB4 CAN_F2R1_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F2R1_FB5_Pos (5U) -#define CAN_F2R1_FB5_Msk (0x1U << CAN_F2R1_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F2R1_FB5 CAN_F2R1_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F2R1_FB6_Pos (6U) -#define CAN_F2R1_FB6_Msk (0x1U << CAN_F2R1_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F2R1_FB6 CAN_F2R1_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F2R1_FB7_Pos (7U) -#define CAN_F2R1_FB7_Msk (0x1U << CAN_F2R1_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F2R1_FB7 CAN_F2R1_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F2R1_FB8_Pos (8U) -#define CAN_F2R1_FB8_Msk (0x1U << CAN_F2R1_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F2R1_FB8 CAN_F2R1_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F2R1_FB9_Pos (9U) -#define CAN_F2R1_FB9_Msk (0x1U << CAN_F2R1_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F2R1_FB9 CAN_F2R1_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F2R1_FB10_Pos (10U) -#define CAN_F2R1_FB10_Msk (0x1U << CAN_F2R1_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F2R1_FB10 CAN_F2R1_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F2R1_FB11_Pos (11U) -#define CAN_F2R1_FB11_Msk (0x1U << CAN_F2R1_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F2R1_FB11 CAN_F2R1_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F2R1_FB12_Pos (12U) -#define CAN_F2R1_FB12_Msk (0x1U << CAN_F2R1_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F2R1_FB12 CAN_F2R1_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F2R1_FB13_Pos (13U) -#define CAN_F2R1_FB13_Msk (0x1U << CAN_F2R1_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F2R1_FB13 CAN_F2R1_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F2R1_FB14_Pos (14U) -#define CAN_F2R1_FB14_Msk (0x1U << CAN_F2R1_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F2R1_FB14 CAN_F2R1_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F2R1_FB15_Pos (15U) -#define CAN_F2R1_FB15_Msk (0x1U << CAN_F2R1_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F2R1_FB15 CAN_F2R1_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F2R1_FB16_Pos (16U) -#define CAN_F2R1_FB16_Msk (0x1U << CAN_F2R1_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F2R1_FB16 CAN_F2R1_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F2R1_FB17_Pos (17U) -#define CAN_F2R1_FB17_Msk (0x1U << CAN_F2R1_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F2R1_FB17 CAN_F2R1_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F2R1_FB18_Pos (18U) -#define CAN_F2R1_FB18_Msk (0x1U << CAN_F2R1_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F2R1_FB18 CAN_F2R1_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F2R1_FB19_Pos (19U) -#define CAN_F2R1_FB19_Msk (0x1U << CAN_F2R1_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F2R1_FB19 CAN_F2R1_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F2R1_FB20_Pos (20U) -#define CAN_F2R1_FB20_Msk (0x1U << CAN_F2R1_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F2R1_FB20 CAN_F2R1_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F2R1_FB21_Pos (21U) -#define CAN_F2R1_FB21_Msk (0x1U << CAN_F2R1_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F2R1_FB21 CAN_F2R1_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F2R1_FB22_Pos (22U) -#define CAN_F2R1_FB22_Msk (0x1U << CAN_F2R1_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F2R1_FB22 CAN_F2R1_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F2R1_FB23_Pos (23U) -#define CAN_F2R1_FB23_Msk (0x1U << CAN_F2R1_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F2R1_FB23 CAN_F2R1_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F2R1_FB24_Pos (24U) -#define CAN_F2R1_FB24_Msk (0x1U << CAN_F2R1_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F2R1_FB24 CAN_F2R1_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F2R1_FB25_Pos (25U) -#define CAN_F2R1_FB25_Msk (0x1U << CAN_F2R1_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F2R1_FB25 CAN_F2R1_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F2R1_FB26_Pos (26U) -#define CAN_F2R1_FB26_Msk (0x1U << CAN_F2R1_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F2R1_FB26 CAN_F2R1_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F2R1_FB27_Pos (27U) -#define CAN_F2R1_FB27_Msk (0x1U << CAN_F2R1_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F2R1_FB27 CAN_F2R1_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F2R1_FB28_Pos (28U) -#define CAN_F2R1_FB28_Msk (0x1U << CAN_F2R1_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F2R1_FB28 CAN_F2R1_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F2R1_FB29_Pos (29U) -#define CAN_F2R1_FB29_Msk (0x1U << CAN_F2R1_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F2R1_FB29 CAN_F2R1_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F2R1_FB30_Pos (30U) -#define CAN_F2R1_FB30_Msk (0x1U << CAN_F2R1_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F2R1_FB30 CAN_F2R1_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F2R1_FB31_Pos (31U) -#define CAN_F2R1_FB31_Msk (0x1U << CAN_F2R1_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F2R1_FB31 CAN_F2R1_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F3R1 register *******************/ -#define CAN_F3R1_FB0_Pos (0U) -#define CAN_F3R1_FB0_Msk (0x1U << CAN_F3R1_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F3R1_FB0 CAN_F3R1_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F3R1_FB1_Pos (1U) -#define CAN_F3R1_FB1_Msk (0x1U << CAN_F3R1_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F3R1_FB1 CAN_F3R1_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F3R1_FB2_Pos (2U) -#define CAN_F3R1_FB2_Msk (0x1U << CAN_F3R1_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F3R1_FB2 CAN_F3R1_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F3R1_FB3_Pos (3U) -#define CAN_F3R1_FB3_Msk (0x1U << CAN_F3R1_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F3R1_FB3 CAN_F3R1_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F3R1_FB4_Pos (4U) -#define CAN_F3R1_FB4_Msk (0x1U << CAN_F3R1_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F3R1_FB4 CAN_F3R1_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F3R1_FB5_Pos (5U) -#define CAN_F3R1_FB5_Msk (0x1U << CAN_F3R1_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F3R1_FB5 CAN_F3R1_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F3R1_FB6_Pos (6U) -#define CAN_F3R1_FB6_Msk (0x1U << CAN_F3R1_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F3R1_FB6 CAN_F3R1_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F3R1_FB7_Pos (7U) -#define CAN_F3R1_FB7_Msk (0x1U << CAN_F3R1_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F3R1_FB7 CAN_F3R1_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F3R1_FB8_Pos (8U) -#define CAN_F3R1_FB8_Msk (0x1U << CAN_F3R1_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F3R1_FB8 CAN_F3R1_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F3R1_FB9_Pos (9U) -#define CAN_F3R1_FB9_Msk (0x1U << CAN_F3R1_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F3R1_FB9 CAN_F3R1_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F3R1_FB10_Pos (10U) -#define CAN_F3R1_FB10_Msk (0x1U << CAN_F3R1_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F3R1_FB10 CAN_F3R1_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F3R1_FB11_Pos (11U) -#define CAN_F3R1_FB11_Msk (0x1U << CAN_F3R1_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F3R1_FB11 CAN_F3R1_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F3R1_FB12_Pos (12U) -#define CAN_F3R1_FB12_Msk (0x1U << CAN_F3R1_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F3R1_FB12 CAN_F3R1_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F3R1_FB13_Pos (13U) -#define CAN_F3R1_FB13_Msk (0x1U << CAN_F3R1_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F3R1_FB13 CAN_F3R1_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F3R1_FB14_Pos (14U) -#define CAN_F3R1_FB14_Msk (0x1U << CAN_F3R1_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F3R1_FB14 CAN_F3R1_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F3R1_FB15_Pos (15U) -#define CAN_F3R1_FB15_Msk (0x1U << CAN_F3R1_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F3R1_FB15 CAN_F3R1_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F3R1_FB16_Pos (16U) -#define CAN_F3R1_FB16_Msk (0x1U << CAN_F3R1_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F3R1_FB16 CAN_F3R1_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F3R1_FB17_Pos (17U) -#define CAN_F3R1_FB17_Msk (0x1U << CAN_F3R1_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F3R1_FB17 CAN_F3R1_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F3R1_FB18_Pos (18U) -#define CAN_F3R1_FB18_Msk (0x1U << CAN_F3R1_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F3R1_FB18 CAN_F3R1_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F3R1_FB19_Pos (19U) -#define CAN_F3R1_FB19_Msk (0x1U << CAN_F3R1_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F3R1_FB19 CAN_F3R1_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F3R1_FB20_Pos (20U) -#define CAN_F3R1_FB20_Msk (0x1U << CAN_F3R1_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F3R1_FB20 CAN_F3R1_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F3R1_FB21_Pos (21U) -#define CAN_F3R1_FB21_Msk (0x1U << CAN_F3R1_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F3R1_FB21 CAN_F3R1_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F3R1_FB22_Pos (22U) -#define CAN_F3R1_FB22_Msk (0x1U << CAN_F3R1_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F3R1_FB22 CAN_F3R1_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F3R1_FB23_Pos (23U) -#define CAN_F3R1_FB23_Msk (0x1U << CAN_F3R1_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F3R1_FB23 CAN_F3R1_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F3R1_FB24_Pos (24U) -#define CAN_F3R1_FB24_Msk (0x1U << CAN_F3R1_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F3R1_FB24 CAN_F3R1_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F3R1_FB25_Pos (25U) -#define CAN_F3R1_FB25_Msk (0x1U << CAN_F3R1_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F3R1_FB25 CAN_F3R1_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F3R1_FB26_Pos (26U) -#define CAN_F3R1_FB26_Msk (0x1U << CAN_F3R1_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F3R1_FB26 CAN_F3R1_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F3R1_FB27_Pos (27U) -#define CAN_F3R1_FB27_Msk (0x1U << CAN_F3R1_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F3R1_FB27 CAN_F3R1_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F3R1_FB28_Pos (28U) -#define CAN_F3R1_FB28_Msk (0x1U << CAN_F3R1_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F3R1_FB28 CAN_F3R1_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F3R1_FB29_Pos (29U) -#define CAN_F3R1_FB29_Msk (0x1U << CAN_F3R1_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F3R1_FB29 CAN_F3R1_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F3R1_FB30_Pos (30U) -#define CAN_F3R1_FB30_Msk (0x1U << CAN_F3R1_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F3R1_FB30 CAN_F3R1_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F3R1_FB31_Pos (31U) -#define CAN_F3R1_FB31_Msk (0x1U << CAN_F3R1_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F3R1_FB31 CAN_F3R1_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F4R1 register *******************/ -#define CAN_F4R1_FB0_Pos (0U) -#define CAN_F4R1_FB0_Msk (0x1U << CAN_F4R1_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F4R1_FB0 CAN_F4R1_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F4R1_FB1_Pos (1U) -#define CAN_F4R1_FB1_Msk (0x1U << CAN_F4R1_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F4R1_FB1 CAN_F4R1_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F4R1_FB2_Pos (2U) -#define CAN_F4R1_FB2_Msk (0x1U << CAN_F4R1_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F4R1_FB2 CAN_F4R1_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F4R1_FB3_Pos (3U) -#define CAN_F4R1_FB3_Msk (0x1U << CAN_F4R1_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F4R1_FB3 CAN_F4R1_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F4R1_FB4_Pos (4U) -#define CAN_F4R1_FB4_Msk (0x1U << CAN_F4R1_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F4R1_FB4 CAN_F4R1_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F4R1_FB5_Pos (5U) -#define CAN_F4R1_FB5_Msk (0x1U << CAN_F4R1_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F4R1_FB5 CAN_F4R1_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F4R1_FB6_Pos (6U) -#define CAN_F4R1_FB6_Msk (0x1U << CAN_F4R1_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F4R1_FB6 CAN_F4R1_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F4R1_FB7_Pos (7U) -#define CAN_F4R1_FB7_Msk (0x1U << CAN_F4R1_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F4R1_FB7 CAN_F4R1_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F4R1_FB8_Pos (8U) -#define CAN_F4R1_FB8_Msk (0x1U << CAN_F4R1_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F4R1_FB8 CAN_F4R1_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F4R1_FB9_Pos (9U) -#define CAN_F4R1_FB9_Msk (0x1U << CAN_F4R1_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F4R1_FB9 CAN_F4R1_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F4R1_FB10_Pos (10U) -#define CAN_F4R1_FB10_Msk (0x1U << CAN_F4R1_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F4R1_FB10 CAN_F4R1_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F4R1_FB11_Pos (11U) -#define CAN_F4R1_FB11_Msk (0x1U << CAN_F4R1_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F4R1_FB11 CAN_F4R1_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F4R1_FB12_Pos (12U) -#define CAN_F4R1_FB12_Msk (0x1U << CAN_F4R1_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F4R1_FB12 CAN_F4R1_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F4R1_FB13_Pos (13U) -#define CAN_F4R1_FB13_Msk (0x1U << CAN_F4R1_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F4R1_FB13 CAN_F4R1_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F4R1_FB14_Pos (14U) -#define CAN_F4R1_FB14_Msk (0x1U << CAN_F4R1_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F4R1_FB14 CAN_F4R1_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F4R1_FB15_Pos (15U) -#define CAN_F4R1_FB15_Msk (0x1U << CAN_F4R1_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F4R1_FB15 CAN_F4R1_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F4R1_FB16_Pos (16U) -#define CAN_F4R1_FB16_Msk (0x1U << CAN_F4R1_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F4R1_FB16 CAN_F4R1_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F4R1_FB17_Pos (17U) -#define CAN_F4R1_FB17_Msk (0x1U << CAN_F4R1_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F4R1_FB17 CAN_F4R1_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F4R1_FB18_Pos (18U) -#define CAN_F4R1_FB18_Msk (0x1U << CAN_F4R1_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F4R1_FB18 CAN_F4R1_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F4R1_FB19_Pos (19U) -#define CAN_F4R1_FB19_Msk (0x1U << CAN_F4R1_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F4R1_FB19 CAN_F4R1_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F4R1_FB20_Pos (20U) -#define CAN_F4R1_FB20_Msk (0x1U << CAN_F4R1_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F4R1_FB20 CAN_F4R1_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F4R1_FB21_Pos (21U) -#define CAN_F4R1_FB21_Msk (0x1U << CAN_F4R1_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F4R1_FB21 CAN_F4R1_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F4R1_FB22_Pos (22U) -#define CAN_F4R1_FB22_Msk (0x1U << CAN_F4R1_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F4R1_FB22 CAN_F4R1_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F4R1_FB23_Pos (23U) -#define CAN_F4R1_FB23_Msk (0x1U << CAN_F4R1_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F4R1_FB23 CAN_F4R1_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F4R1_FB24_Pos (24U) -#define CAN_F4R1_FB24_Msk (0x1U << CAN_F4R1_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F4R1_FB24 CAN_F4R1_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F4R1_FB25_Pos (25U) -#define CAN_F4R1_FB25_Msk (0x1U << CAN_F4R1_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F4R1_FB25 CAN_F4R1_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F4R1_FB26_Pos (26U) -#define CAN_F4R1_FB26_Msk (0x1U << CAN_F4R1_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F4R1_FB26 CAN_F4R1_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F4R1_FB27_Pos (27U) -#define CAN_F4R1_FB27_Msk (0x1U << CAN_F4R1_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F4R1_FB27 CAN_F4R1_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F4R1_FB28_Pos (28U) -#define CAN_F4R1_FB28_Msk (0x1U << CAN_F4R1_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F4R1_FB28 CAN_F4R1_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F4R1_FB29_Pos (29U) -#define CAN_F4R1_FB29_Msk (0x1U << CAN_F4R1_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F4R1_FB29 CAN_F4R1_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F4R1_FB30_Pos (30U) -#define CAN_F4R1_FB30_Msk (0x1U << CAN_F4R1_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F4R1_FB30 CAN_F4R1_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F4R1_FB31_Pos (31U) -#define CAN_F4R1_FB31_Msk (0x1U << CAN_F4R1_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F4R1_FB31 CAN_F4R1_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F5R1 register *******************/ -#define CAN_F5R1_FB0_Pos (0U) -#define CAN_F5R1_FB0_Msk (0x1U << CAN_F5R1_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F5R1_FB0 CAN_F5R1_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F5R1_FB1_Pos (1U) -#define CAN_F5R1_FB1_Msk (0x1U << CAN_F5R1_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F5R1_FB1 CAN_F5R1_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F5R1_FB2_Pos (2U) -#define CAN_F5R1_FB2_Msk (0x1U << CAN_F5R1_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F5R1_FB2 CAN_F5R1_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F5R1_FB3_Pos (3U) -#define CAN_F5R1_FB3_Msk (0x1U << CAN_F5R1_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F5R1_FB3 CAN_F5R1_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F5R1_FB4_Pos (4U) -#define CAN_F5R1_FB4_Msk (0x1U << CAN_F5R1_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F5R1_FB4 CAN_F5R1_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F5R1_FB5_Pos (5U) -#define CAN_F5R1_FB5_Msk (0x1U << CAN_F5R1_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F5R1_FB5 CAN_F5R1_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F5R1_FB6_Pos (6U) -#define CAN_F5R1_FB6_Msk (0x1U << CAN_F5R1_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F5R1_FB6 CAN_F5R1_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F5R1_FB7_Pos (7U) -#define CAN_F5R1_FB7_Msk (0x1U << CAN_F5R1_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F5R1_FB7 CAN_F5R1_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F5R1_FB8_Pos (8U) -#define CAN_F5R1_FB8_Msk (0x1U << CAN_F5R1_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F5R1_FB8 CAN_F5R1_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F5R1_FB9_Pos (9U) -#define CAN_F5R1_FB9_Msk (0x1U << CAN_F5R1_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F5R1_FB9 CAN_F5R1_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F5R1_FB10_Pos (10U) -#define CAN_F5R1_FB10_Msk (0x1U << CAN_F5R1_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F5R1_FB10 CAN_F5R1_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F5R1_FB11_Pos (11U) -#define CAN_F5R1_FB11_Msk (0x1U << CAN_F5R1_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F5R1_FB11 CAN_F5R1_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F5R1_FB12_Pos (12U) -#define CAN_F5R1_FB12_Msk (0x1U << CAN_F5R1_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F5R1_FB12 CAN_F5R1_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F5R1_FB13_Pos (13U) -#define CAN_F5R1_FB13_Msk (0x1U << CAN_F5R1_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F5R1_FB13 CAN_F5R1_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F5R1_FB14_Pos (14U) -#define CAN_F5R1_FB14_Msk (0x1U << CAN_F5R1_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F5R1_FB14 CAN_F5R1_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F5R1_FB15_Pos (15U) -#define CAN_F5R1_FB15_Msk (0x1U << CAN_F5R1_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F5R1_FB15 CAN_F5R1_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F5R1_FB16_Pos (16U) -#define CAN_F5R1_FB16_Msk (0x1U << CAN_F5R1_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F5R1_FB16 CAN_F5R1_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F5R1_FB17_Pos (17U) -#define CAN_F5R1_FB17_Msk (0x1U << CAN_F5R1_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F5R1_FB17 CAN_F5R1_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F5R1_FB18_Pos (18U) -#define CAN_F5R1_FB18_Msk (0x1U << CAN_F5R1_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F5R1_FB18 CAN_F5R1_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F5R1_FB19_Pos (19U) -#define CAN_F5R1_FB19_Msk (0x1U << CAN_F5R1_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F5R1_FB19 CAN_F5R1_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F5R1_FB20_Pos (20U) -#define CAN_F5R1_FB20_Msk (0x1U << CAN_F5R1_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F5R1_FB20 CAN_F5R1_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F5R1_FB21_Pos (21U) -#define CAN_F5R1_FB21_Msk (0x1U << CAN_F5R1_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F5R1_FB21 CAN_F5R1_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F5R1_FB22_Pos (22U) -#define CAN_F5R1_FB22_Msk (0x1U << CAN_F5R1_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F5R1_FB22 CAN_F5R1_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F5R1_FB23_Pos (23U) -#define CAN_F5R1_FB23_Msk (0x1U << CAN_F5R1_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F5R1_FB23 CAN_F5R1_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F5R1_FB24_Pos (24U) -#define CAN_F5R1_FB24_Msk (0x1U << CAN_F5R1_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F5R1_FB24 CAN_F5R1_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F5R1_FB25_Pos (25U) -#define CAN_F5R1_FB25_Msk (0x1U << CAN_F5R1_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F5R1_FB25 CAN_F5R1_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F5R1_FB26_Pos (26U) -#define CAN_F5R1_FB26_Msk (0x1U << CAN_F5R1_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F5R1_FB26 CAN_F5R1_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F5R1_FB27_Pos (27U) -#define CAN_F5R1_FB27_Msk (0x1U << CAN_F5R1_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F5R1_FB27 CAN_F5R1_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F5R1_FB28_Pos (28U) -#define CAN_F5R1_FB28_Msk (0x1U << CAN_F5R1_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F5R1_FB28 CAN_F5R1_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F5R1_FB29_Pos (29U) -#define CAN_F5R1_FB29_Msk (0x1U << CAN_F5R1_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F5R1_FB29 CAN_F5R1_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F5R1_FB30_Pos (30U) -#define CAN_F5R1_FB30_Msk (0x1U << CAN_F5R1_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F5R1_FB30 CAN_F5R1_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F5R1_FB31_Pos (31U) -#define CAN_F5R1_FB31_Msk (0x1U << CAN_F5R1_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F5R1_FB31 CAN_F5R1_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F6R1 register *******************/ -#define CAN_F6R1_FB0_Pos (0U) -#define CAN_F6R1_FB0_Msk (0x1U << CAN_F6R1_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F6R1_FB0 CAN_F6R1_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F6R1_FB1_Pos (1U) -#define CAN_F6R1_FB1_Msk (0x1U << CAN_F6R1_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F6R1_FB1 CAN_F6R1_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F6R1_FB2_Pos (2U) -#define CAN_F6R1_FB2_Msk (0x1U << CAN_F6R1_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F6R1_FB2 CAN_F6R1_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F6R1_FB3_Pos (3U) -#define CAN_F6R1_FB3_Msk (0x1U << CAN_F6R1_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F6R1_FB3 CAN_F6R1_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F6R1_FB4_Pos (4U) -#define CAN_F6R1_FB4_Msk (0x1U << CAN_F6R1_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F6R1_FB4 CAN_F6R1_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F6R1_FB5_Pos (5U) -#define CAN_F6R1_FB5_Msk (0x1U << CAN_F6R1_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F6R1_FB5 CAN_F6R1_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F6R1_FB6_Pos (6U) -#define CAN_F6R1_FB6_Msk (0x1U << CAN_F6R1_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F6R1_FB6 CAN_F6R1_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F6R1_FB7_Pos (7U) -#define CAN_F6R1_FB7_Msk (0x1U << CAN_F6R1_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F6R1_FB7 CAN_F6R1_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F6R1_FB8_Pos (8U) -#define CAN_F6R1_FB8_Msk (0x1U << CAN_F6R1_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F6R1_FB8 CAN_F6R1_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F6R1_FB9_Pos (9U) -#define CAN_F6R1_FB9_Msk (0x1U << CAN_F6R1_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F6R1_FB9 CAN_F6R1_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F6R1_FB10_Pos (10U) -#define CAN_F6R1_FB10_Msk (0x1U << CAN_F6R1_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F6R1_FB10 CAN_F6R1_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F6R1_FB11_Pos (11U) -#define CAN_F6R1_FB11_Msk (0x1U << CAN_F6R1_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F6R1_FB11 CAN_F6R1_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F6R1_FB12_Pos (12U) -#define CAN_F6R1_FB12_Msk (0x1U << CAN_F6R1_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F6R1_FB12 CAN_F6R1_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F6R1_FB13_Pos (13U) -#define CAN_F6R1_FB13_Msk (0x1U << CAN_F6R1_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F6R1_FB13 CAN_F6R1_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F6R1_FB14_Pos (14U) -#define CAN_F6R1_FB14_Msk (0x1U << CAN_F6R1_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F6R1_FB14 CAN_F6R1_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F6R1_FB15_Pos (15U) -#define CAN_F6R1_FB15_Msk (0x1U << CAN_F6R1_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F6R1_FB15 CAN_F6R1_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F6R1_FB16_Pos (16U) -#define CAN_F6R1_FB16_Msk (0x1U << CAN_F6R1_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F6R1_FB16 CAN_F6R1_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F6R1_FB17_Pos (17U) -#define CAN_F6R1_FB17_Msk (0x1U << CAN_F6R1_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F6R1_FB17 CAN_F6R1_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F6R1_FB18_Pos (18U) -#define CAN_F6R1_FB18_Msk (0x1U << CAN_F6R1_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F6R1_FB18 CAN_F6R1_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F6R1_FB19_Pos (19U) -#define CAN_F6R1_FB19_Msk (0x1U << CAN_F6R1_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F6R1_FB19 CAN_F6R1_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F6R1_FB20_Pos (20U) -#define CAN_F6R1_FB20_Msk (0x1U << CAN_F6R1_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F6R1_FB20 CAN_F6R1_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F6R1_FB21_Pos (21U) -#define CAN_F6R1_FB21_Msk (0x1U << CAN_F6R1_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F6R1_FB21 CAN_F6R1_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F6R1_FB22_Pos (22U) -#define CAN_F6R1_FB22_Msk (0x1U << CAN_F6R1_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F6R1_FB22 CAN_F6R1_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F6R1_FB23_Pos (23U) -#define CAN_F6R1_FB23_Msk (0x1U << CAN_F6R1_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F6R1_FB23 CAN_F6R1_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F6R1_FB24_Pos (24U) -#define CAN_F6R1_FB24_Msk (0x1U << CAN_F6R1_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F6R1_FB24 CAN_F6R1_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F6R1_FB25_Pos (25U) -#define CAN_F6R1_FB25_Msk (0x1U << CAN_F6R1_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F6R1_FB25 CAN_F6R1_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F6R1_FB26_Pos (26U) -#define CAN_F6R1_FB26_Msk (0x1U << CAN_F6R1_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F6R1_FB26 CAN_F6R1_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F6R1_FB27_Pos (27U) -#define CAN_F6R1_FB27_Msk (0x1U << CAN_F6R1_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F6R1_FB27 CAN_F6R1_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F6R1_FB28_Pos (28U) -#define CAN_F6R1_FB28_Msk (0x1U << CAN_F6R1_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F6R1_FB28 CAN_F6R1_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F6R1_FB29_Pos (29U) -#define CAN_F6R1_FB29_Msk (0x1U << CAN_F6R1_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F6R1_FB29 CAN_F6R1_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F6R1_FB30_Pos (30U) -#define CAN_F6R1_FB30_Msk (0x1U << CAN_F6R1_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F6R1_FB30 CAN_F6R1_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F6R1_FB31_Pos (31U) -#define CAN_F6R1_FB31_Msk (0x1U << CAN_F6R1_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F6R1_FB31 CAN_F6R1_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F7R1 register *******************/ -#define CAN_F7R1_FB0_Pos (0U) -#define CAN_F7R1_FB0_Msk (0x1U << CAN_F7R1_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F7R1_FB0 CAN_F7R1_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F7R1_FB1_Pos (1U) -#define CAN_F7R1_FB1_Msk (0x1U << CAN_F7R1_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F7R1_FB1 CAN_F7R1_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F7R1_FB2_Pos (2U) -#define CAN_F7R1_FB2_Msk (0x1U << CAN_F7R1_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F7R1_FB2 CAN_F7R1_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F7R1_FB3_Pos (3U) -#define CAN_F7R1_FB3_Msk (0x1U << CAN_F7R1_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F7R1_FB3 CAN_F7R1_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F7R1_FB4_Pos (4U) -#define CAN_F7R1_FB4_Msk (0x1U << CAN_F7R1_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F7R1_FB4 CAN_F7R1_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F7R1_FB5_Pos (5U) -#define CAN_F7R1_FB5_Msk (0x1U << CAN_F7R1_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F7R1_FB5 CAN_F7R1_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F7R1_FB6_Pos (6U) -#define CAN_F7R1_FB6_Msk (0x1U << CAN_F7R1_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F7R1_FB6 CAN_F7R1_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F7R1_FB7_Pos (7U) -#define CAN_F7R1_FB7_Msk (0x1U << CAN_F7R1_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F7R1_FB7 CAN_F7R1_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F7R1_FB8_Pos (8U) -#define CAN_F7R1_FB8_Msk (0x1U << CAN_F7R1_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F7R1_FB8 CAN_F7R1_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F7R1_FB9_Pos (9U) -#define CAN_F7R1_FB9_Msk (0x1U << CAN_F7R1_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F7R1_FB9 CAN_F7R1_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F7R1_FB10_Pos (10U) -#define CAN_F7R1_FB10_Msk (0x1U << CAN_F7R1_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F7R1_FB10 CAN_F7R1_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F7R1_FB11_Pos (11U) -#define CAN_F7R1_FB11_Msk (0x1U << CAN_F7R1_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F7R1_FB11 CAN_F7R1_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F7R1_FB12_Pos (12U) -#define CAN_F7R1_FB12_Msk (0x1U << CAN_F7R1_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F7R1_FB12 CAN_F7R1_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F7R1_FB13_Pos (13U) -#define CAN_F7R1_FB13_Msk (0x1U << CAN_F7R1_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F7R1_FB13 CAN_F7R1_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F7R1_FB14_Pos (14U) -#define CAN_F7R1_FB14_Msk (0x1U << CAN_F7R1_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F7R1_FB14 CAN_F7R1_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F7R1_FB15_Pos (15U) -#define CAN_F7R1_FB15_Msk (0x1U << CAN_F7R1_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F7R1_FB15 CAN_F7R1_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F7R1_FB16_Pos (16U) -#define CAN_F7R1_FB16_Msk (0x1U << CAN_F7R1_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F7R1_FB16 CAN_F7R1_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F7R1_FB17_Pos (17U) -#define CAN_F7R1_FB17_Msk (0x1U << CAN_F7R1_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F7R1_FB17 CAN_F7R1_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F7R1_FB18_Pos (18U) -#define CAN_F7R1_FB18_Msk (0x1U << CAN_F7R1_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F7R1_FB18 CAN_F7R1_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F7R1_FB19_Pos (19U) -#define CAN_F7R1_FB19_Msk (0x1U << CAN_F7R1_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F7R1_FB19 CAN_F7R1_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F7R1_FB20_Pos (20U) -#define CAN_F7R1_FB20_Msk (0x1U << CAN_F7R1_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F7R1_FB20 CAN_F7R1_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F7R1_FB21_Pos (21U) -#define CAN_F7R1_FB21_Msk (0x1U << CAN_F7R1_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F7R1_FB21 CAN_F7R1_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F7R1_FB22_Pos (22U) -#define CAN_F7R1_FB22_Msk (0x1U << CAN_F7R1_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F7R1_FB22 CAN_F7R1_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F7R1_FB23_Pos (23U) -#define CAN_F7R1_FB23_Msk (0x1U << CAN_F7R1_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F7R1_FB23 CAN_F7R1_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F7R1_FB24_Pos (24U) -#define CAN_F7R1_FB24_Msk (0x1U << CAN_F7R1_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F7R1_FB24 CAN_F7R1_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F7R1_FB25_Pos (25U) -#define CAN_F7R1_FB25_Msk (0x1U << CAN_F7R1_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F7R1_FB25 CAN_F7R1_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F7R1_FB26_Pos (26U) -#define CAN_F7R1_FB26_Msk (0x1U << CAN_F7R1_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F7R1_FB26 CAN_F7R1_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F7R1_FB27_Pos (27U) -#define CAN_F7R1_FB27_Msk (0x1U << CAN_F7R1_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F7R1_FB27 CAN_F7R1_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F7R1_FB28_Pos (28U) -#define CAN_F7R1_FB28_Msk (0x1U << CAN_F7R1_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F7R1_FB28 CAN_F7R1_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F7R1_FB29_Pos (29U) -#define CAN_F7R1_FB29_Msk (0x1U << CAN_F7R1_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F7R1_FB29 CAN_F7R1_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F7R1_FB30_Pos (30U) -#define CAN_F7R1_FB30_Msk (0x1U << CAN_F7R1_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F7R1_FB30 CAN_F7R1_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F7R1_FB31_Pos (31U) -#define CAN_F7R1_FB31_Msk (0x1U << CAN_F7R1_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F7R1_FB31 CAN_F7R1_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F8R1 register *******************/ -#define CAN_F8R1_FB0_Pos (0U) -#define CAN_F8R1_FB0_Msk (0x1U << CAN_F8R1_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F8R1_FB0 CAN_F8R1_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F8R1_FB1_Pos (1U) -#define CAN_F8R1_FB1_Msk (0x1U << CAN_F8R1_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F8R1_FB1 CAN_F8R1_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F8R1_FB2_Pos (2U) -#define CAN_F8R1_FB2_Msk (0x1U << CAN_F8R1_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F8R1_FB2 CAN_F8R1_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F8R1_FB3_Pos (3U) -#define CAN_F8R1_FB3_Msk (0x1U << CAN_F8R1_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F8R1_FB3 CAN_F8R1_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F8R1_FB4_Pos (4U) -#define CAN_F8R1_FB4_Msk (0x1U << CAN_F8R1_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F8R1_FB4 CAN_F8R1_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F8R1_FB5_Pos (5U) -#define CAN_F8R1_FB5_Msk (0x1U << CAN_F8R1_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F8R1_FB5 CAN_F8R1_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F8R1_FB6_Pos (6U) -#define CAN_F8R1_FB6_Msk (0x1U << CAN_F8R1_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F8R1_FB6 CAN_F8R1_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F8R1_FB7_Pos (7U) -#define CAN_F8R1_FB7_Msk (0x1U << CAN_F8R1_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F8R1_FB7 CAN_F8R1_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F8R1_FB8_Pos (8U) -#define CAN_F8R1_FB8_Msk (0x1U << CAN_F8R1_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F8R1_FB8 CAN_F8R1_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F8R1_FB9_Pos (9U) -#define CAN_F8R1_FB9_Msk (0x1U << CAN_F8R1_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F8R1_FB9 CAN_F8R1_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F8R1_FB10_Pos (10U) -#define CAN_F8R1_FB10_Msk (0x1U << CAN_F8R1_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F8R1_FB10 CAN_F8R1_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F8R1_FB11_Pos (11U) -#define CAN_F8R1_FB11_Msk (0x1U << CAN_F8R1_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F8R1_FB11 CAN_F8R1_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F8R1_FB12_Pos (12U) -#define CAN_F8R1_FB12_Msk (0x1U << CAN_F8R1_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F8R1_FB12 CAN_F8R1_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F8R1_FB13_Pos (13U) -#define CAN_F8R1_FB13_Msk (0x1U << CAN_F8R1_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F8R1_FB13 CAN_F8R1_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F8R1_FB14_Pos (14U) -#define CAN_F8R1_FB14_Msk (0x1U << CAN_F8R1_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F8R1_FB14 CAN_F8R1_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F8R1_FB15_Pos (15U) -#define CAN_F8R1_FB15_Msk (0x1U << CAN_F8R1_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F8R1_FB15 CAN_F8R1_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F8R1_FB16_Pos (16U) -#define CAN_F8R1_FB16_Msk (0x1U << CAN_F8R1_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F8R1_FB16 CAN_F8R1_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F8R1_FB17_Pos (17U) -#define CAN_F8R1_FB17_Msk (0x1U << CAN_F8R1_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F8R1_FB17 CAN_F8R1_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F8R1_FB18_Pos (18U) -#define CAN_F8R1_FB18_Msk (0x1U << CAN_F8R1_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F8R1_FB18 CAN_F8R1_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F8R1_FB19_Pos (19U) -#define CAN_F8R1_FB19_Msk (0x1U << CAN_F8R1_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F8R1_FB19 CAN_F8R1_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F8R1_FB20_Pos (20U) -#define CAN_F8R1_FB20_Msk (0x1U << CAN_F8R1_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F8R1_FB20 CAN_F8R1_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F8R1_FB21_Pos (21U) -#define CAN_F8R1_FB21_Msk (0x1U << CAN_F8R1_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F8R1_FB21 CAN_F8R1_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F8R1_FB22_Pos (22U) -#define CAN_F8R1_FB22_Msk (0x1U << CAN_F8R1_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F8R1_FB22 CAN_F8R1_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F8R1_FB23_Pos (23U) -#define CAN_F8R1_FB23_Msk (0x1U << CAN_F8R1_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F8R1_FB23 CAN_F8R1_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F8R1_FB24_Pos (24U) -#define CAN_F8R1_FB24_Msk (0x1U << CAN_F8R1_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F8R1_FB24 CAN_F8R1_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F8R1_FB25_Pos (25U) -#define CAN_F8R1_FB25_Msk (0x1U << CAN_F8R1_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F8R1_FB25 CAN_F8R1_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F8R1_FB26_Pos (26U) -#define CAN_F8R1_FB26_Msk (0x1U << CAN_F8R1_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F8R1_FB26 CAN_F8R1_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F8R1_FB27_Pos (27U) -#define CAN_F8R1_FB27_Msk (0x1U << CAN_F8R1_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F8R1_FB27 CAN_F8R1_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F8R1_FB28_Pos (28U) -#define CAN_F8R1_FB28_Msk (0x1U << CAN_F8R1_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F8R1_FB28 CAN_F8R1_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F8R1_FB29_Pos (29U) -#define CAN_F8R1_FB29_Msk (0x1U << CAN_F8R1_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F8R1_FB29 CAN_F8R1_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F8R1_FB30_Pos (30U) -#define CAN_F8R1_FB30_Msk (0x1U << CAN_F8R1_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F8R1_FB30 CAN_F8R1_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F8R1_FB31_Pos (31U) -#define CAN_F8R1_FB31_Msk (0x1U << CAN_F8R1_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F8R1_FB31 CAN_F8R1_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F9R1 register *******************/ -#define CAN_F9R1_FB0_Pos (0U) -#define CAN_F9R1_FB0_Msk (0x1U << CAN_F9R1_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F9R1_FB0 CAN_F9R1_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F9R1_FB1_Pos (1U) -#define CAN_F9R1_FB1_Msk (0x1U << CAN_F9R1_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F9R1_FB1 CAN_F9R1_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F9R1_FB2_Pos (2U) -#define CAN_F9R1_FB2_Msk (0x1U << CAN_F9R1_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F9R1_FB2 CAN_F9R1_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F9R1_FB3_Pos (3U) -#define CAN_F9R1_FB3_Msk (0x1U << CAN_F9R1_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F9R1_FB3 CAN_F9R1_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F9R1_FB4_Pos (4U) -#define CAN_F9R1_FB4_Msk (0x1U << CAN_F9R1_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F9R1_FB4 CAN_F9R1_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F9R1_FB5_Pos (5U) -#define CAN_F9R1_FB5_Msk (0x1U << CAN_F9R1_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F9R1_FB5 CAN_F9R1_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F9R1_FB6_Pos (6U) -#define CAN_F9R1_FB6_Msk (0x1U << CAN_F9R1_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F9R1_FB6 CAN_F9R1_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F9R1_FB7_Pos (7U) -#define CAN_F9R1_FB7_Msk (0x1U << CAN_F9R1_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F9R1_FB7 CAN_F9R1_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F9R1_FB8_Pos (8U) -#define CAN_F9R1_FB8_Msk (0x1U << CAN_F9R1_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F9R1_FB8 CAN_F9R1_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F9R1_FB9_Pos (9U) -#define CAN_F9R1_FB9_Msk (0x1U << CAN_F9R1_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F9R1_FB9 CAN_F9R1_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F9R1_FB10_Pos (10U) -#define CAN_F9R1_FB10_Msk (0x1U << CAN_F9R1_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F9R1_FB10 CAN_F9R1_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F9R1_FB11_Pos (11U) -#define CAN_F9R1_FB11_Msk (0x1U << CAN_F9R1_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F9R1_FB11 CAN_F9R1_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F9R1_FB12_Pos (12U) -#define CAN_F9R1_FB12_Msk (0x1U << CAN_F9R1_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F9R1_FB12 CAN_F9R1_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F9R1_FB13_Pos (13U) -#define CAN_F9R1_FB13_Msk (0x1U << CAN_F9R1_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F9R1_FB13 CAN_F9R1_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F9R1_FB14_Pos (14U) -#define CAN_F9R1_FB14_Msk (0x1U << CAN_F9R1_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F9R1_FB14 CAN_F9R1_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F9R1_FB15_Pos (15U) -#define CAN_F9R1_FB15_Msk (0x1U << CAN_F9R1_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F9R1_FB15 CAN_F9R1_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F9R1_FB16_Pos (16U) -#define CAN_F9R1_FB16_Msk (0x1U << CAN_F9R1_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F9R1_FB16 CAN_F9R1_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F9R1_FB17_Pos (17U) -#define CAN_F9R1_FB17_Msk (0x1U << CAN_F9R1_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F9R1_FB17 CAN_F9R1_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F9R1_FB18_Pos (18U) -#define CAN_F9R1_FB18_Msk (0x1U << CAN_F9R1_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F9R1_FB18 CAN_F9R1_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F9R1_FB19_Pos (19U) -#define CAN_F9R1_FB19_Msk (0x1U << CAN_F9R1_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F9R1_FB19 CAN_F9R1_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F9R1_FB20_Pos (20U) -#define CAN_F9R1_FB20_Msk (0x1U << CAN_F9R1_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F9R1_FB20 CAN_F9R1_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F9R1_FB21_Pos (21U) -#define CAN_F9R1_FB21_Msk (0x1U << CAN_F9R1_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F9R1_FB21 CAN_F9R1_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F9R1_FB22_Pos (22U) -#define CAN_F9R1_FB22_Msk (0x1U << CAN_F9R1_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F9R1_FB22 CAN_F9R1_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F9R1_FB23_Pos (23U) -#define CAN_F9R1_FB23_Msk (0x1U << CAN_F9R1_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F9R1_FB23 CAN_F9R1_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F9R1_FB24_Pos (24U) -#define CAN_F9R1_FB24_Msk (0x1U << CAN_F9R1_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F9R1_FB24 CAN_F9R1_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F9R1_FB25_Pos (25U) -#define CAN_F9R1_FB25_Msk (0x1U << CAN_F9R1_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F9R1_FB25 CAN_F9R1_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F9R1_FB26_Pos (26U) -#define CAN_F9R1_FB26_Msk (0x1U << CAN_F9R1_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F9R1_FB26 CAN_F9R1_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F9R1_FB27_Pos (27U) -#define CAN_F9R1_FB27_Msk (0x1U << CAN_F9R1_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F9R1_FB27 CAN_F9R1_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F9R1_FB28_Pos (28U) -#define CAN_F9R1_FB28_Msk (0x1U << CAN_F9R1_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F9R1_FB28 CAN_F9R1_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F9R1_FB29_Pos (29U) -#define CAN_F9R1_FB29_Msk (0x1U << CAN_F9R1_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F9R1_FB29 CAN_F9R1_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F9R1_FB30_Pos (30U) -#define CAN_F9R1_FB30_Msk (0x1U << CAN_F9R1_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F9R1_FB30 CAN_F9R1_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F9R1_FB31_Pos (31U) -#define CAN_F9R1_FB31_Msk (0x1U << CAN_F9R1_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F9R1_FB31 CAN_F9R1_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F10R1 register ******************/ -#define CAN_F10R1_FB0_Pos (0U) -#define CAN_F10R1_FB0_Msk (0x1U << CAN_F10R1_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F10R1_FB0 CAN_F10R1_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F10R1_FB1_Pos (1U) -#define CAN_F10R1_FB1_Msk (0x1U << CAN_F10R1_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F10R1_FB1 CAN_F10R1_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F10R1_FB2_Pos (2U) -#define CAN_F10R1_FB2_Msk (0x1U << CAN_F10R1_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F10R1_FB2 CAN_F10R1_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F10R1_FB3_Pos (3U) -#define CAN_F10R1_FB3_Msk (0x1U << CAN_F10R1_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F10R1_FB3 CAN_F10R1_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F10R1_FB4_Pos (4U) -#define CAN_F10R1_FB4_Msk (0x1U << CAN_F10R1_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F10R1_FB4 CAN_F10R1_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F10R1_FB5_Pos (5U) -#define CAN_F10R1_FB5_Msk (0x1U << CAN_F10R1_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F10R1_FB5 CAN_F10R1_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F10R1_FB6_Pos (6U) -#define CAN_F10R1_FB6_Msk (0x1U << CAN_F10R1_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F10R1_FB6 CAN_F10R1_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F10R1_FB7_Pos (7U) -#define CAN_F10R1_FB7_Msk (0x1U << CAN_F10R1_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F10R1_FB7 CAN_F10R1_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F10R1_FB8_Pos (8U) -#define CAN_F10R1_FB8_Msk (0x1U << CAN_F10R1_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F10R1_FB8 CAN_F10R1_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F10R1_FB9_Pos (9U) -#define CAN_F10R1_FB9_Msk (0x1U << CAN_F10R1_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F10R1_FB9 CAN_F10R1_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F10R1_FB10_Pos (10U) -#define CAN_F10R1_FB10_Msk (0x1U << CAN_F10R1_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F10R1_FB10 CAN_F10R1_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F10R1_FB11_Pos (11U) -#define CAN_F10R1_FB11_Msk (0x1U << CAN_F10R1_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F10R1_FB11 CAN_F10R1_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F10R1_FB12_Pos (12U) -#define CAN_F10R1_FB12_Msk (0x1U << CAN_F10R1_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F10R1_FB12 CAN_F10R1_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F10R1_FB13_Pos (13U) -#define CAN_F10R1_FB13_Msk (0x1U << CAN_F10R1_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F10R1_FB13 CAN_F10R1_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F10R1_FB14_Pos (14U) -#define CAN_F10R1_FB14_Msk (0x1U << CAN_F10R1_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F10R1_FB14 CAN_F10R1_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F10R1_FB15_Pos (15U) -#define CAN_F10R1_FB15_Msk (0x1U << CAN_F10R1_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F10R1_FB15 CAN_F10R1_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F10R1_FB16_Pos (16U) -#define CAN_F10R1_FB16_Msk (0x1U << CAN_F10R1_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F10R1_FB16 CAN_F10R1_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F10R1_FB17_Pos (17U) -#define CAN_F10R1_FB17_Msk (0x1U << CAN_F10R1_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F10R1_FB17 CAN_F10R1_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F10R1_FB18_Pos (18U) -#define CAN_F10R1_FB18_Msk (0x1U << CAN_F10R1_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F10R1_FB18 CAN_F10R1_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F10R1_FB19_Pos (19U) -#define CAN_F10R1_FB19_Msk (0x1U << CAN_F10R1_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F10R1_FB19 CAN_F10R1_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F10R1_FB20_Pos (20U) -#define CAN_F10R1_FB20_Msk (0x1U << CAN_F10R1_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F10R1_FB20 CAN_F10R1_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F10R1_FB21_Pos (21U) -#define CAN_F10R1_FB21_Msk (0x1U << CAN_F10R1_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F10R1_FB21 CAN_F10R1_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F10R1_FB22_Pos (22U) -#define CAN_F10R1_FB22_Msk (0x1U << CAN_F10R1_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F10R1_FB22 CAN_F10R1_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F10R1_FB23_Pos (23U) -#define CAN_F10R1_FB23_Msk (0x1U << CAN_F10R1_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F10R1_FB23 CAN_F10R1_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F10R1_FB24_Pos (24U) -#define CAN_F10R1_FB24_Msk (0x1U << CAN_F10R1_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F10R1_FB24 CAN_F10R1_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F10R1_FB25_Pos (25U) -#define CAN_F10R1_FB25_Msk (0x1U << CAN_F10R1_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F10R1_FB25 CAN_F10R1_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F10R1_FB26_Pos (26U) -#define CAN_F10R1_FB26_Msk (0x1U << CAN_F10R1_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F10R1_FB26 CAN_F10R1_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F10R1_FB27_Pos (27U) -#define CAN_F10R1_FB27_Msk (0x1U << CAN_F10R1_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F10R1_FB27 CAN_F10R1_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F10R1_FB28_Pos (28U) -#define CAN_F10R1_FB28_Msk (0x1U << CAN_F10R1_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F10R1_FB28 CAN_F10R1_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F10R1_FB29_Pos (29U) -#define CAN_F10R1_FB29_Msk (0x1U << CAN_F10R1_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F10R1_FB29 CAN_F10R1_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F10R1_FB30_Pos (30U) -#define CAN_F10R1_FB30_Msk (0x1U << CAN_F10R1_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F10R1_FB30 CAN_F10R1_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F10R1_FB31_Pos (31U) -#define CAN_F10R1_FB31_Msk (0x1U << CAN_F10R1_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F10R1_FB31 CAN_F10R1_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F11R1 register ******************/ -#define CAN_F11R1_FB0_Pos (0U) -#define CAN_F11R1_FB0_Msk (0x1U << CAN_F11R1_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F11R1_FB0 CAN_F11R1_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F11R1_FB1_Pos (1U) -#define CAN_F11R1_FB1_Msk (0x1U << CAN_F11R1_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F11R1_FB1 CAN_F11R1_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F11R1_FB2_Pos (2U) -#define CAN_F11R1_FB2_Msk (0x1U << CAN_F11R1_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F11R1_FB2 CAN_F11R1_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F11R1_FB3_Pos (3U) -#define CAN_F11R1_FB3_Msk (0x1U << CAN_F11R1_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F11R1_FB3 CAN_F11R1_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F11R1_FB4_Pos (4U) -#define CAN_F11R1_FB4_Msk (0x1U << CAN_F11R1_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F11R1_FB4 CAN_F11R1_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F11R1_FB5_Pos (5U) -#define CAN_F11R1_FB5_Msk (0x1U << CAN_F11R1_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F11R1_FB5 CAN_F11R1_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F11R1_FB6_Pos (6U) -#define CAN_F11R1_FB6_Msk (0x1U << CAN_F11R1_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F11R1_FB6 CAN_F11R1_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F11R1_FB7_Pos (7U) -#define CAN_F11R1_FB7_Msk (0x1U << CAN_F11R1_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F11R1_FB7 CAN_F11R1_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F11R1_FB8_Pos (8U) -#define CAN_F11R1_FB8_Msk (0x1U << CAN_F11R1_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F11R1_FB8 CAN_F11R1_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F11R1_FB9_Pos (9U) -#define CAN_F11R1_FB9_Msk (0x1U << CAN_F11R1_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F11R1_FB9 CAN_F11R1_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F11R1_FB10_Pos (10U) -#define CAN_F11R1_FB10_Msk (0x1U << CAN_F11R1_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F11R1_FB10 CAN_F11R1_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F11R1_FB11_Pos (11U) -#define CAN_F11R1_FB11_Msk (0x1U << CAN_F11R1_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F11R1_FB11 CAN_F11R1_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F11R1_FB12_Pos (12U) -#define CAN_F11R1_FB12_Msk (0x1U << CAN_F11R1_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F11R1_FB12 CAN_F11R1_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F11R1_FB13_Pos (13U) -#define CAN_F11R1_FB13_Msk (0x1U << CAN_F11R1_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F11R1_FB13 CAN_F11R1_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F11R1_FB14_Pos (14U) -#define CAN_F11R1_FB14_Msk (0x1U << CAN_F11R1_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F11R1_FB14 CAN_F11R1_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F11R1_FB15_Pos (15U) -#define CAN_F11R1_FB15_Msk (0x1U << CAN_F11R1_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F11R1_FB15 CAN_F11R1_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F11R1_FB16_Pos (16U) -#define CAN_F11R1_FB16_Msk (0x1U << CAN_F11R1_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F11R1_FB16 CAN_F11R1_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F11R1_FB17_Pos (17U) -#define CAN_F11R1_FB17_Msk (0x1U << CAN_F11R1_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F11R1_FB17 CAN_F11R1_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F11R1_FB18_Pos (18U) -#define CAN_F11R1_FB18_Msk (0x1U << CAN_F11R1_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F11R1_FB18 CAN_F11R1_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F11R1_FB19_Pos (19U) -#define CAN_F11R1_FB19_Msk (0x1U << CAN_F11R1_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F11R1_FB19 CAN_F11R1_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F11R1_FB20_Pos (20U) -#define CAN_F11R1_FB20_Msk (0x1U << CAN_F11R1_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F11R1_FB20 CAN_F11R1_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F11R1_FB21_Pos (21U) -#define CAN_F11R1_FB21_Msk (0x1U << CAN_F11R1_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F11R1_FB21 CAN_F11R1_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F11R1_FB22_Pos (22U) -#define CAN_F11R1_FB22_Msk (0x1U << CAN_F11R1_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F11R1_FB22 CAN_F11R1_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F11R1_FB23_Pos (23U) -#define CAN_F11R1_FB23_Msk (0x1U << CAN_F11R1_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F11R1_FB23 CAN_F11R1_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F11R1_FB24_Pos (24U) -#define CAN_F11R1_FB24_Msk (0x1U << CAN_F11R1_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F11R1_FB24 CAN_F11R1_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F11R1_FB25_Pos (25U) -#define CAN_F11R1_FB25_Msk (0x1U << CAN_F11R1_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F11R1_FB25 CAN_F11R1_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F11R1_FB26_Pos (26U) -#define CAN_F11R1_FB26_Msk (0x1U << CAN_F11R1_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F11R1_FB26 CAN_F11R1_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F11R1_FB27_Pos (27U) -#define CAN_F11R1_FB27_Msk (0x1U << CAN_F11R1_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F11R1_FB27 CAN_F11R1_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F11R1_FB28_Pos (28U) -#define CAN_F11R1_FB28_Msk (0x1U << CAN_F11R1_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F11R1_FB28 CAN_F11R1_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F11R1_FB29_Pos (29U) -#define CAN_F11R1_FB29_Msk (0x1U << CAN_F11R1_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F11R1_FB29 CAN_F11R1_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F11R1_FB30_Pos (30U) -#define CAN_F11R1_FB30_Msk (0x1U << CAN_F11R1_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F11R1_FB30 CAN_F11R1_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F11R1_FB31_Pos (31U) -#define CAN_F11R1_FB31_Msk (0x1U << CAN_F11R1_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F11R1_FB31 CAN_F11R1_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F12R1 register ******************/ -#define CAN_F12R1_FB0_Pos (0U) -#define CAN_F12R1_FB0_Msk (0x1U << CAN_F12R1_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F12R1_FB0 CAN_F12R1_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F12R1_FB1_Pos (1U) -#define CAN_F12R1_FB1_Msk (0x1U << CAN_F12R1_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F12R1_FB1 CAN_F12R1_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F12R1_FB2_Pos (2U) -#define CAN_F12R1_FB2_Msk (0x1U << CAN_F12R1_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F12R1_FB2 CAN_F12R1_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F12R1_FB3_Pos (3U) -#define CAN_F12R1_FB3_Msk (0x1U << CAN_F12R1_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F12R1_FB3 CAN_F12R1_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F12R1_FB4_Pos (4U) -#define CAN_F12R1_FB4_Msk (0x1U << CAN_F12R1_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F12R1_FB4 CAN_F12R1_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F12R1_FB5_Pos (5U) -#define CAN_F12R1_FB5_Msk (0x1U << CAN_F12R1_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F12R1_FB5 CAN_F12R1_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F12R1_FB6_Pos (6U) -#define CAN_F12R1_FB6_Msk (0x1U << CAN_F12R1_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F12R1_FB6 CAN_F12R1_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F12R1_FB7_Pos (7U) -#define CAN_F12R1_FB7_Msk (0x1U << CAN_F12R1_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F12R1_FB7 CAN_F12R1_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F12R1_FB8_Pos (8U) -#define CAN_F12R1_FB8_Msk (0x1U << CAN_F12R1_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F12R1_FB8 CAN_F12R1_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F12R1_FB9_Pos (9U) -#define CAN_F12R1_FB9_Msk (0x1U << CAN_F12R1_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F12R1_FB9 CAN_F12R1_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F12R1_FB10_Pos (10U) -#define CAN_F12R1_FB10_Msk (0x1U << CAN_F12R1_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F12R1_FB10 CAN_F12R1_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F12R1_FB11_Pos (11U) -#define CAN_F12R1_FB11_Msk (0x1U << CAN_F12R1_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F12R1_FB11 CAN_F12R1_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F12R1_FB12_Pos (12U) -#define CAN_F12R1_FB12_Msk (0x1U << CAN_F12R1_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F12R1_FB12 CAN_F12R1_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F12R1_FB13_Pos (13U) -#define CAN_F12R1_FB13_Msk (0x1U << CAN_F12R1_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F12R1_FB13 CAN_F12R1_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F12R1_FB14_Pos (14U) -#define CAN_F12R1_FB14_Msk (0x1U << CAN_F12R1_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F12R1_FB14 CAN_F12R1_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F12R1_FB15_Pos (15U) -#define CAN_F12R1_FB15_Msk (0x1U << CAN_F12R1_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F12R1_FB15 CAN_F12R1_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F12R1_FB16_Pos (16U) -#define CAN_F12R1_FB16_Msk (0x1U << CAN_F12R1_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F12R1_FB16 CAN_F12R1_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F12R1_FB17_Pos (17U) -#define CAN_F12R1_FB17_Msk (0x1U << CAN_F12R1_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F12R1_FB17 CAN_F12R1_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F12R1_FB18_Pos (18U) -#define CAN_F12R1_FB18_Msk (0x1U << CAN_F12R1_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F12R1_FB18 CAN_F12R1_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F12R1_FB19_Pos (19U) -#define CAN_F12R1_FB19_Msk (0x1U << CAN_F12R1_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F12R1_FB19 CAN_F12R1_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F12R1_FB20_Pos (20U) -#define CAN_F12R1_FB20_Msk (0x1U << CAN_F12R1_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F12R1_FB20 CAN_F12R1_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F12R1_FB21_Pos (21U) -#define CAN_F12R1_FB21_Msk (0x1U << CAN_F12R1_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F12R1_FB21 CAN_F12R1_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F12R1_FB22_Pos (22U) -#define CAN_F12R1_FB22_Msk (0x1U << CAN_F12R1_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F12R1_FB22 CAN_F12R1_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F12R1_FB23_Pos (23U) -#define CAN_F12R1_FB23_Msk (0x1U << CAN_F12R1_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F12R1_FB23 CAN_F12R1_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F12R1_FB24_Pos (24U) -#define CAN_F12R1_FB24_Msk (0x1U << CAN_F12R1_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F12R1_FB24 CAN_F12R1_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F12R1_FB25_Pos (25U) -#define CAN_F12R1_FB25_Msk (0x1U << CAN_F12R1_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F12R1_FB25 CAN_F12R1_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F12R1_FB26_Pos (26U) -#define CAN_F12R1_FB26_Msk (0x1U << CAN_F12R1_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F12R1_FB26 CAN_F12R1_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F12R1_FB27_Pos (27U) -#define CAN_F12R1_FB27_Msk (0x1U << CAN_F12R1_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F12R1_FB27 CAN_F12R1_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F12R1_FB28_Pos (28U) -#define CAN_F12R1_FB28_Msk (0x1U << CAN_F12R1_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F12R1_FB28 CAN_F12R1_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F12R1_FB29_Pos (29U) -#define CAN_F12R1_FB29_Msk (0x1U << CAN_F12R1_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F12R1_FB29 CAN_F12R1_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F12R1_FB30_Pos (30U) -#define CAN_F12R1_FB30_Msk (0x1U << CAN_F12R1_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F12R1_FB30 CAN_F12R1_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F12R1_FB31_Pos (31U) -#define CAN_F12R1_FB31_Msk (0x1U << CAN_F12R1_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F12R1_FB31 CAN_F12R1_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F13R1 register ******************/ -#define CAN_F13R1_FB0_Pos (0U) -#define CAN_F13R1_FB0_Msk (0x1U << CAN_F13R1_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F13R1_FB0 CAN_F13R1_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F13R1_FB1_Pos (1U) -#define CAN_F13R1_FB1_Msk (0x1U << CAN_F13R1_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F13R1_FB1 CAN_F13R1_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F13R1_FB2_Pos (2U) -#define CAN_F13R1_FB2_Msk (0x1U << CAN_F13R1_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F13R1_FB2 CAN_F13R1_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F13R1_FB3_Pos (3U) -#define CAN_F13R1_FB3_Msk (0x1U << CAN_F13R1_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F13R1_FB3 CAN_F13R1_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F13R1_FB4_Pos (4U) -#define CAN_F13R1_FB4_Msk (0x1U << CAN_F13R1_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F13R1_FB4 CAN_F13R1_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F13R1_FB5_Pos (5U) -#define CAN_F13R1_FB5_Msk (0x1U << CAN_F13R1_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F13R1_FB5 CAN_F13R1_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F13R1_FB6_Pos (6U) -#define CAN_F13R1_FB6_Msk (0x1U << CAN_F13R1_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F13R1_FB6 CAN_F13R1_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F13R1_FB7_Pos (7U) -#define CAN_F13R1_FB7_Msk (0x1U << CAN_F13R1_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F13R1_FB7 CAN_F13R1_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F13R1_FB8_Pos (8U) -#define CAN_F13R1_FB8_Msk (0x1U << CAN_F13R1_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F13R1_FB8 CAN_F13R1_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F13R1_FB9_Pos (9U) -#define CAN_F13R1_FB9_Msk (0x1U << CAN_F13R1_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F13R1_FB9 CAN_F13R1_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F13R1_FB10_Pos (10U) -#define CAN_F13R1_FB10_Msk (0x1U << CAN_F13R1_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F13R1_FB10 CAN_F13R1_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F13R1_FB11_Pos (11U) -#define CAN_F13R1_FB11_Msk (0x1U << CAN_F13R1_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F13R1_FB11 CAN_F13R1_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F13R1_FB12_Pos (12U) -#define CAN_F13R1_FB12_Msk (0x1U << CAN_F13R1_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F13R1_FB12 CAN_F13R1_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F13R1_FB13_Pos (13U) -#define CAN_F13R1_FB13_Msk (0x1U << CAN_F13R1_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F13R1_FB13 CAN_F13R1_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F13R1_FB14_Pos (14U) -#define CAN_F13R1_FB14_Msk (0x1U << CAN_F13R1_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F13R1_FB14 CAN_F13R1_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F13R1_FB15_Pos (15U) -#define CAN_F13R1_FB15_Msk (0x1U << CAN_F13R1_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F13R1_FB15 CAN_F13R1_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F13R1_FB16_Pos (16U) -#define CAN_F13R1_FB16_Msk (0x1U << CAN_F13R1_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F13R1_FB16 CAN_F13R1_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F13R1_FB17_Pos (17U) -#define CAN_F13R1_FB17_Msk (0x1U << CAN_F13R1_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F13R1_FB17 CAN_F13R1_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F13R1_FB18_Pos (18U) -#define CAN_F13R1_FB18_Msk (0x1U << CAN_F13R1_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F13R1_FB18 CAN_F13R1_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F13R1_FB19_Pos (19U) -#define CAN_F13R1_FB19_Msk (0x1U << CAN_F13R1_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F13R1_FB19 CAN_F13R1_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F13R1_FB20_Pos (20U) -#define CAN_F13R1_FB20_Msk (0x1U << CAN_F13R1_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F13R1_FB20 CAN_F13R1_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F13R1_FB21_Pos (21U) -#define CAN_F13R1_FB21_Msk (0x1U << CAN_F13R1_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F13R1_FB21 CAN_F13R1_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F13R1_FB22_Pos (22U) -#define CAN_F13R1_FB22_Msk (0x1U << CAN_F13R1_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F13R1_FB22 CAN_F13R1_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F13R1_FB23_Pos (23U) -#define CAN_F13R1_FB23_Msk (0x1U << CAN_F13R1_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F13R1_FB23 CAN_F13R1_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F13R1_FB24_Pos (24U) -#define CAN_F13R1_FB24_Msk (0x1U << CAN_F13R1_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F13R1_FB24 CAN_F13R1_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F13R1_FB25_Pos (25U) -#define CAN_F13R1_FB25_Msk (0x1U << CAN_F13R1_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F13R1_FB25 CAN_F13R1_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F13R1_FB26_Pos (26U) -#define CAN_F13R1_FB26_Msk (0x1U << CAN_F13R1_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F13R1_FB26 CAN_F13R1_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F13R1_FB27_Pos (27U) -#define CAN_F13R1_FB27_Msk (0x1U << CAN_F13R1_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F13R1_FB27 CAN_F13R1_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F13R1_FB28_Pos (28U) -#define CAN_F13R1_FB28_Msk (0x1U << CAN_F13R1_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F13R1_FB28 CAN_F13R1_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F13R1_FB29_Pos (29U) -#define CAN_F13R1_FB29_Msk (0x1U << CAN_F13R1_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F13R1_FB29 CAN_F13R1_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F13R1_FB30_Pos (30U) -#define CAN_F13R1_FB30_Msk (0x1U << CAN_F13R1_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F13R1_FB30 CAN_F13R1_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F13R1_FB31_Pos (31U) -#define CAN_F13R1_FB31_Msk (0x1U << CAN_F13R1_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F13R1_FB31 CAN_F13R1_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F0R2 register *******************/ -#define CAN_F0R2_FB0_Pos (0U) -#define CAN_F0R2_FB0_Msk (0x1U << CAN_F0R2_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F0R2_FB0 CAN_F0R2_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F0R2_FB1_Pos (1U) -#define CAN_F0R2_FB1_Msk (0x1U << CAN_F0R2_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F0R2_FB1 CAN_F0R2_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F0R2_FB2_Pos (2U) -#define CAN_F0R2_FB2_Msk (0x1U << CAN_F0R2_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F0R2_FB2 CAN_F0R2_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F0R2_FB3_Pos (3U) -#define CAN_F0R2_FB3_Msk (0x1U << CAN_F0R2_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F0R2_FB3 CAN_F0R2_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F0R2_FB4_Pos (4U) -#define CAN_F0R2_FB4_Msk (0x1U << CAN_F0R2_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F0R2_FB4 CAN_F0R2_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F0R2_FB5_Pos (5U) -#define CAN_F0R2_FB5_Msk (0x1U << CAN_F0R2_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F0R2_FB5 CAN_F0R2_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F0R2_FB6_Pos (6U) -#define CAN_F0R2_FB6_Msk (0x1U << CAN_F0R2_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F0R2_FB6 CAN_F0R2_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F0R2_FB7_Pos (7U) -#define CAN_F0R2_FB7_Msk (0x1U << CAN_F0R2_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F0R2_FB7 CAN_F0R2_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F0R2_FB8_Pos (8U) -#define CAN_F0R2_FB8_Msk (0x1U << CAN_F0R2_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F0R2_FB8 CAN_F0R2_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F0R2_FB9_Pos (9U) -#define CAN_F0R2_FB9_Msk (0x1U << CAN_F0R2_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F0R2_FB9 CAN_F0R2_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F0R2_FB10_Pos (10U) -#define CAN_F0R2_FB10_Msk (0x1U << CAN_F0R2_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F0R2_FB10 CAN_F0R2_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F0R2_FB11_Pos (11U) -#define CAN_F0R2_FB11_Msk (0x1U << CAN_F0R2_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F0R2_FB11 CAN_F0R2_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F0R2_FB12_Pos (12U) -#define CAN_F0R2_FB12_Msk (0x1U << CAN_F0R2_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F0R2_FB12 CAN_F0R2_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F0R2_FB13_Pos (13U) -#define CAN_F0R2_FB13_Msk (0x1U << CAN_F0R2_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F0R2_FB13 CAN_F0R2_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F0R2_FB14_Pos (14U) -#define CAN_F0R2_FB14_Msk (0x1U << CAN_F0R2_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F0R2_FB14 CAN_F0R2_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F0R2_FB15_Pos (15U) -#define CAN_F0R2_FB15_Msk (0x1U << CAN_F0R2_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F0R2_FB15 CAN_F0R2_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F0R2_FB16_Pos (16U) -#define CAN_F0R2_FB16_Msk (0x1U << CAN_F0R2_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F0R2_FB16 CAN_F0R2_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F0R2_FB17_Pos (17U) -#define CAN_F0R2_FB17_Msk (0x1U << CAN_F0R2_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F0R2_FB17 CAN_F0R2_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F0R2_FB18_Pos (18U) -#define CAN_F0R2_FB18_Msk (0x1U << CAN_F0R2_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F0R2_FB18 CAN_F0R2_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F0R2_FB19_Pos (19U) -#define CAN_F0R2_FB19_Msk (0x1U << CAN_F0R2_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F0R2_FB19 CAN_F0R2_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F0R2_FB20_Pos (20U) -#define CAN_F0R2_FB20_Msk (0x1U << CAN_F0R2_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F0R2_FB20 CAN_F0R2_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F0R2_FB21_Pos (21U) -#define CAN_F0R2_FB21_Msk (0x1U << CAN_F0R2_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F0R2_FB21 CAN_F0R2_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F0R2_FB22_Pos (22U) -#define CAN_F0R2_FB22_Msk (0x1U << CAN_F0R2_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F0R2_FB22 CAN_F0R2_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F0R2_FB23_Pos (23U) -#define CAN_F0R2_FB23_Msk (0x1U << CAN_F0R2_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F0R2_FB23 CAN_F0R2_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F0R2_FB24_Pos (24U) -#define CAN_F0R2_FB24_Msk (0x1U << CAN_F0R2_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F0R2_FB24 CAN_F0R2_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F0R2_FB25_Pos (25U) -#define CAN_F0R2_FB25_Msk (0x1U << CAN_F0R2_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F0R2_FB25 CAN_F0R2_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F0R2_FB26_Pos (26U) -#define CAN_F0R2_FB26_Msk (0x1U << CAN_F0R2_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F0R2_FB26 CAN_F0R2_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F0R2_FB27_Pos (27U) -#define CAN_F0R2_FB27_Msk (0x1U << CAN_F0R2_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F0R2_FB27 CAN_F0R2_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F0R2_FB28_Pos (28U) -#define CAN_F0R2_FB28_Msk (0x1U << CAN_F0R2_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F0R2_FB28 CAN_F0R2_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F0R2_FB29_Pos (29U) -#define CAN_F0R2_FB29_Msk (0x1U << CAN_F0R2_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F0R2_FB29 CAN_F0R2_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F0R2_FB30_Pos (30U) -#define CAN_F0R2_FB30_Msk (0x1U << CAN_F0R2_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F0R2_FB30 CAN_F0R2_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F0R2_FB31_Pos (31U) -#define CAN_F0R2_FB31_Msk (0x1U << CAN_F0R2_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F0R2_FB31 CAN_F0R2_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F1R2 register *******************/ -#define CAN_F1R2_FB0_Pos (0U) -#define CAN_F1R2_FB0_Msk (0x1U << CAN_F1R2_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F1R2_FB0 CAN_F1R2_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F1R2_FB1_Pos (1U) -#define CAN_F1R2_FB1_Msk (0x1U << CAN_F1R2_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F1R2_FB1 CAN_F1R2_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F1R2_FB2_Pos (2U) -#define CAN_F1R2_FB2_Msk (0x1U << CAN_F1R2_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F1R2_FB2 CAN_F1R2_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F1R2_FB3_Pos (3U) -#define CAN_F1R2_FB3_Msk (0x1U << CAN_F1R2_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F1R2_FB3 CAN_F1R2_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F1R2_FB4_Pos (4U) -#define CAN_F1R2_FB4_Msk (0x1U << CAN_F1R2_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F1R2_FB4 CAN_F1R2_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F1R2_FB5_Pos (5U) -#define CAN_F1R2_FB5_Msk (0x1U << CAN_F1R2_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F1R2_FB5 CAN_F1R2_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F1R2_FB6_Pos (6U) -#define CAN_F1R2_FB6_Msk (0x1U << CAN_F1R2_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F1R2_FB6 CAN_F1R2_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F1R2_FB7_Pos (7U) -#define CAN_F1R2_FB7_Msk (0x1U << CAN_F1R2_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F1R2_FB7 CAN_F1R2_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F1R2_FB8_Pos (8U) -#define CAN_F1R2_FB8_Msk (0x1U << CAN_F1R2_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F1R2_FB8 CAN_F1R2_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F1R2_FB9_Pos (9U) -#define CAN_F1R2_FB9_Msk (0x1U << CAN_F1R2_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F1R2_FB9 CAN_F1R2_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F1R2_FB10_Pos (10U) -#define CAN_F1R2_FB10_Msk (0x1U << CAN_F1R2_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F1R2_FB10 CAN_F1R2_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F1R2_FB11_Pos (11U) -#define CAN_F1R2_FB11_Msk (0x1U << CAN_F1R2_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F1R2_FB11 CAN_F1R2_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F1R2_FB12_Pos (12U) -#define CAN_F1R2_FB12_Msk (0x1U << CAN_F1R2_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F1R2_FB12 CAN_F1R2_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F1R2_FB13_Pos (13U) -#define CAN_F1R2_FB13_Msk (0x1U << CAN_F1R2_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F1R2_FB13 CAN_F1R2_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F1R2_FB14_Pos (14U) -#define CAN_F1R2_FB14_Msk (0x1U << CAN_F1R2_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F1R2_FB14 CAN_F1R2_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F1R2_FB15_Pos (15U) -#define CAN_F1R2_FB15_Msk (0x1U << CAN_F1R2_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F1R2_FB15 CAN_F1R2_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F1R2_FB16_Pos (16U) -#define CAN_F1R2_FB16_Msk (0x1U << CAN_F1R2_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F1R2_FB16 CAN_F1R2_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F1R2_FB17_Pos (17U) -#define CAN_F1R2_FB17_Msk (0x1U << CAN_F1R2_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F1R2_FB17 CAN_F1R2_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F1R2_FB18_Pos (18U) -#define CAN_F1R2_FB18_Msk (0x1U << CAN_F1R2_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F1R2_FB18 CAN_F1R2_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F1R2_FB19_Pos (19U) -#define CAN_F1R2_FB19_Msk (0x1U << CAN_F1R2_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F1R2_FB19 CAN_F1R2_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F1R2_FB20_Pos (20U) -#define CAN_F1R2_FB20_Msk (0x1U << CAN_F1R2_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F1R2_FB20 CAN_F1R2_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F1R2_FB21_Pos (21U) -#define CAN_F1R2_FB21_Msk (0x1U << CAN_F1R2_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F1R2_FB21 CAN_F1R2_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F1R2_FB22_Pos (22U) -#define CAN_F1R2_FB22_Msk (0x1U << CAN_F1R2_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F1R2_FB22 CAN_F1R2_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F1R2_FB23_Pos (23U) -#define CAN_F1R2_FB23_Msk (0x1U << CAN_F1R2_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F1R2_FB23 CAN_F1R2_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F1R2_FB24_Pos (24U) -#define CAN_F1R2_FB24_Msk (0x1U << CAN_F1R2_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F1R2_FB24 CAN_F1R2_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F1R2_FB25_Pos (25U) -#define CAN_F1R2_FB25_Msk (0x1U << CAN_F1R2_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F1R2_FB25 CAN_F1R2_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F1R2_FB26_Pos (26U) -#define CAN_F1R2_FB26_Msk (0x1U << CAN_F1R2_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F1R2_FB26 CAN_F1R2_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F1R2_FB27_Pos (27U) -#define CAN_F1R2_FB27_Msk (0x1U << CAN_F1R2_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F1R2_FB27 CAN_F1R2_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F1R2_FB28_Pos (28U) -#define CAN_F1R2_FB28_Msk (0x1U << CAN_F1R2_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F1R2_FB28 CAN_F1R2_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F1R2_FB29_Pos (29U) -#define CAN_F1R2_FB29_Msk (0x1U << CAN_F1R2_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F1R2_FB29 CAN_F1R2_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F1R2_FB30_Pos (30U) -#define CAN_F1R2_FB30_Msk (0x1U << CAN_F1R2_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F1R2_FB30 CAN_F1R2_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F1R2_FB31_Pos (31U) -#define CAN_F1R2_FB31_Msk (0x1U << CAN_F1R2_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F1R2_FB31 CAN_F1R2_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F2R2 register *******************/ -#define CAN_F2R2_FB0_Pos (0U) -#define CAN_F2R2_FB0_Msk (0x1U << CAN_F2R2_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F2R2_FB0 CAN_F2R2_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F2R2_FB1_Pos (1U) -#define CAN_F2R2_FB1_Msk (0x1U << CAN_F2R2_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F2R2_FB1 CAN_F2R2_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F2R2_FB2_Pos (2U) -#define CAN_F2R2_FB2_Msk (0x1U << CAN_F2R2_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F2R2_FB2 CAN_F2R2_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F2R2_FB3_Pos (3U) -#define CAN_F2R2_FB3_Msk (0x1U << CAN_F2R2_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F2R2_FB3 CAN_F2R2_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F2R2_FB4_Pos (4U) -#define CAN_F2R2_FB4_Msk (0x1U << CAN_F2R2_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F2R2_FB4 CAN_F2R2_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F2R2_FB5_Pos (5U) -#define CAN_F2R2_FB5_Msk (0x1U << CAN_F2R2_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F2R2_FB5 CAN_F2R2_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F2R2_FB6_Pos (6U) -#define CAN_F2R2_FB6_Msk (0x1U << CAN_F2R2_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F2R2_FB6 CAN_F2R2_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F2R2_FB7_Pos (7U) -#define CAN_F2R2_FB7_Msk (0x1U << CAN_F2R2_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F2R2_FB7 CAN_F2R2_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F2R2_FB8_Pos (8U) -#define CAN_F2R2_FB8_Msk (0x1U << CAN_F2R2_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F2R2_FB8 CAN_F2R2_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F2R2_FB9_Pos (9U) -#define CAN_F2R2_FB9_Msk (0x1U << CAN_F2R2_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F2R2_FB9 CAN_F2R2_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F2R2_FB10_Pos (10U) -#define CAN_F2R2_FB10_Msk (0x1U << CAN_F2R2_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F2R2_FB10 CAN_F2R2_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F2R2_FB11_Pos (11U) -#define CAN_F2R2_FB11_Msk (0x1U << CAN_F2R2_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F2R2_FB11 CAN_F2R2_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F2R2_FB12_Pos (12U) -#define CAN_F2R2_FB12_Msk (0x1U << CAN_F2R2_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F2R2_FB12 CAN_F2R2_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F2R2_FB13_Pos (13U) -#define CAN_F2R2_FB13_Msk (0x1U << CAN_F2R2_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F2R2_FB13 CAN_F2R2_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F2R2_FB14_Pos (14U) -#define CAN_F2R2_FB14_Msk (0x1U << CAN_F2R2_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F2R2_FB14 CAN_F2R2_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F2R2_FB15_Pos (15U) -#define CAN_F2R2_FB15_Msk (0x1U << CAN_F2R2_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F2R2_FB15 CAN_F2R2_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F2R2_FB16_Pos (16U) -#define CAN_F2R2_FB16_Msk (0x1U << CAN_F2R2_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F2R2_FB16 CAN_F2R2_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F2R2_FB17_Pos (17U) -#define CAN_F2R2_FB17_Msk (0x1U << CAN_F2R2_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F2R2_FB17 CAN_F2R2_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F2R2_FB18_Pos (18U) -#define CAN_F2R2_FB18_Msk (0x1U << CAN_F2R2_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F2R2_FB18 CAN_F2R2_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F2R2_FB19_Pos (19U) -#define CAN_F2R2_FB19_Msk (0x1U << CAN_F2R2_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F2R2_FB19 CAN_F2R2_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F2R2_FB20_Pos (20U) -#define CAN_F2R2_FB20_Msk (0x1U << CAN_F2R2_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F2R2_FB20 CAN_F2R2_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F2R2_FB21_Pos (21U) -#define CAN_F2R2_FB21_Msk (0x1U << CAN_F2R2_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F2R2_FB21 CAN_F2R2_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F2R2_FB22_Pos (22U) -#define CAN_F2R2_FB22_Msk (0x1U << CAN_F2R2_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F2R2_FB22 CAN_F2R2_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F2R2_FB23_Pos (23U) -#define CAN_F2R2_FB23_Msk (0x1U << CAN_F2R2_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F2R2_FB23 CAN_F2R2_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F2R2_FB24_Pos (24U) -#define CAN_F2R2_FB24_Msk (0x1U << CAN_F2R2_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F2R2_FB24 CAN_F2R2_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F2R2_FB25_Pos (25U) -#define CAN_F2R2_FB25_Msk (0x1U << CAN_F2R2_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F2R2_FB25 CAN_F2R2_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F2R2_FB26_Pos (26U) -#define CAN_F2R2_FB26_Msk (0x1U << CAN_F2R2_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F2R2_FB26 CAN_F2R2_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F2R2_FB27_Pos (27U) -#define CAN_F2R2_FB27_Msk (0x1U << CAN_F2R2_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F2R2_FB27 CAN_F2R2_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F2R2_FB28_Pos (28U) -#define CAN_F2R2_FB28_Msk (0x1U << CAN_F2R2_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F2R2_FB28 CAN_F2R2_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F2R2_FB29_Pos (29U) -#define CAN_F2R2_FB29_Msk (0x1U << CAN_F2R2_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F2R2_FB29 CAN_F2R2_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F2R2_FB30_Pos (30U) -#define CAN_F2R2_FB30_Msk (0x1U << CAN_F2R2_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F2R2_FB30 CAN_F2R2_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F2R2_FB31_Pos (31U) -#define CAN_F2R2_FB31_Msk (0x1U << CAN_F2R2_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F2R2_FB31 CAN_F2R2_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F3R2 register *******************/ -#define CAN_F3R2_FB0_Pos (0U) -#define CAN_F3R2_FB0_Msk (0x1U << CAN_F3R2_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F3R2_FB0 CAN_F3R2_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F3R2_FB1_Pos (1U) -#define CAN_F3R2_FB1_Msk (0x1U << CAN_F3R2_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F3R2_FB1 CAN_F3R2_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F3R2_FB2_Pos (2U) -#define CAN_F3R2_FB2_Msk (0x1U << CAN_F3R2_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F3R2_FB2 CAN_F3R2_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F3R2_FB3_Pos (3U) -#define CAN_F3R2_FB3_Msk (0x1U << CAN_F3R2_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F3R2_FB3 CAN_F3R2_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F3R2_FB4_Pos (4U) -#define CAN_F3R2_FB4_Msk (0x1U << CAN_F3R2_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F3R2_FB4 CAN_F3R2_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F3R2_FB5_Pos (5U) -#define CAN_F3R2_FB5_Msk (0x1U << CAN_F3R2_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F3R2_FB5 CAN_F3R2_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F3R2_FB6_Pos (6U) -#define CAN_F3R2_FB6_Msk (0x1U << CAN_F3R2_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F3R2_FB6 CAN_F3R2_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F3R2_FB7_Pos (7U) -#define CAN_F3R2_FB7_Msk (0x1U << CAN_F3R2_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F3R2_FB7 CAN_F3R2_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F3R2_FB8_Pos (8U) -#define CAN_F3R2_FB8_Msk (0x1U << CAN_F3R2_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F3R2_FB8 CAN_F3R2_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F3R2_FB9_Pos (9U) -#define CAN_F3R2_FB9_Msk (0x1U << CAN_F3R2_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F3R2_FB9 CAN_F3R2_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F3R2_FB10_Pos (10U) -#define CAN_F3R2_FB10_Msk (0x1U << CAN_F3R2_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F3R2_FB10 CAN_F3R2_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F3R2_FB11_Pos (11U) -#define CAN_F3R2_FB11_Msk (0x1U << CAN_F3R2_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F3R2_FB11 CAN_F3R2_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F3R2_FB12_Pos (12U) -#define CAN_F3R2_FB12_Msk (0x1U << CAN_F3R2_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F3R2_FB12 CAN_F3R2_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F3R2_FB13_Pos (13U) -#define CAN_F3R2_FB13_Msk (0x1U << CAN_F3R2_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F3R2_FB13 CAN_F3R2_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F3R2_FB14_Pos (14U) -#define CAN_F3R2_FB14_Msk (0x1U << CAN_F3R2_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F3R2_FB14 CAN_F3R2_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F3R2_FB15_Pos (15U) -#define CAN_F3R2_FB15_Msk (0x1U << CAN_F3R2_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F3R2_FB15 CAN_F3R2_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F3R2_FB16_Pos (16U) -#define CAN_F3R2_FB16_Msk (0x1U << CAN_F3R2_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F3R2_FB16 CAN_F3R2_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F3R2_FB17_Pos (17U) -#define CAN_F3R2_FB17_Msk (0x1U << CAN_F3R2_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F3R2_FB17 CAN_F3R2_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F3R2_FB18_Pos (18U) -#define CAN_F3R2_FB18_Msk (0x1U << CAN_F3R2_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F3R2_FB18 CAN_F3R2_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F3R2_FB19_Pos (19U) -#define CAN_F3R2_FB19_Msk (0x1U << CAN_F3R2_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F3R2_FB19 CAN_F3R2_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F3R2_FB20_Pos (20U) -#define CAN_F3R2_FB20_Msk (0x1U << CAN_F3R2_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F3R2_FB20 CAN_F3R2_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F3R2_FB21_Pos (21U) -#define CAN_F3R2_FB21_Msk (0x1U << CAN_F3R2_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F3R2_FB21 CAN_F3R2_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F3R2_FB22_Pos (22U) -#define CAN_F3R2_FB22_Msk (0x1U << CAN_F3R2_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F3R2_FB22 CAN_F3R2_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F3R2_FB23_Pos (23U) -#define CAN_F3R2_FB23_Msk (0x1U << CAN_F3R2_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F3R2_FB23 CAN_F3R2_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F3R2_FB24_Pos (24U) -#define CAN_F3R2_FB24_Msk (0x1U << CAN_F3R2_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F3R2_FB24 CAN_F3R2_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F3R2_FB25_Pos (25U) -#define CAN_F3R2_FB25_Msk (0x1U << CAN_F3R2_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F3R2_FB25 CAN_F3R2_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F3R2_FB26_Pos (26U) -#define CAN_F3R2_FB26_Msk (0x1U << CAN_F3R2_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F3R2_FB26 CAN_F3R2_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F3R2_FB27_Pos (27U) -#define CAN_F3R2_FB27_Msk (0x1U << CAN_F3R2_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F3R2_FB27 CAN_F3R2_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F3R2_FB28_Pos (28U) -#define CAN_F3R2_FB28_Msk (0x1U << CAN_F3R2_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F3R2_FB28 CAN_F3R2_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F3R2_FB29_Pos (29U) -#define CAN_F3R2_FB29_Msk (0x1U << CAN_F3R2_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F3R2_FB29 CAN_F3R2_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F3R2_FB30_Pos (30U) -#define CAN_F3R2_FB30_Msk (0x1U << CAN_F3R2_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F3R2_FB30 CAN_F3R2_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F3R2_FB31_Pos (31U) -#define CAN_F3R2_FB31_Msk (0x1U << CAN_F3R2_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F3R2_FB31 CAN_F3R2_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F4R2 register *******************/ -#define CAN_F4R2_FB0_Pos (0U) -#define CAN_F4R2_FB0_Msk (0x1U << CAN_F4R2_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F4R2_FB0 CAN_F4R2_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F4R2_FB1_Pos (1U) -#define CAN_F4R2_FB1_Msk (0x1U << CAN_F4R2_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F4R2_FB1 CAN_F4R2_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F4R2_FB2_Pos (2U) -#define CAN_F4R2_FB2_Msk (0x1U << CAN_F4R2_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F4R2_FB2 CAN_F4R2_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F4R2_FB3_Pos (3U) -#define CAN_F4R2_FB3_Msk (0x1U << CAN_F4R2_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F4R2_FB3 CAN_F4R2_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F4R2_FB4_Pos (4U) -#define CAN_F4R2_FB4_Msk (0x1U << CAN_F4R2_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F4R2_FB4 CAN_F4R2_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F4R2_FB5_Pos (5U) -#define CAN_F4R2_FB5_Msk (0x1U << CAN_F4R2_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F4R2_FB5 CAN_F4R2_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F4R2_FB6_Pos (6U) -#define CAN_F4R2_FB6_Msk (0x1U << CAN_F4R2_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F4R2_FB6 CAN_F4R2_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F4R2_FB7_Pos (7U) -#define CAN_F4R2_FB7_Msk (0x1U << CAN_F4R2_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F4R2_FB7 CAN_F4R2_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F4R2_FB8_Pos (8U) -#define CAN_F4R2_FB8_Msk (0x1U << CAN_F4R2_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F4R2_FB8 CAN_F4R2_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F4R2_FB9_Pos (9U) -#define CAN_F4R2_FB9_Msk (0x1U << CAN_F4R2_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F4R2_FB9 CAN_F4R2_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F4R2_FB10_Pos (10U) -#define CAN_F4R2_FB10_Msk (0x1U << CAN_F4R2_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F4R2_FB10 CAN_F4R2_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F4R2_FB11_Pos (11U) -#define CAN_F4R2_FB11_Msk (0x1U << CAN_F4R2_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F4R2_FB11 CAN_F4R2_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F4R2_FB12_Pos (12U) -#define CAN_F4R2_FB12_Msk (0x1U << CAN_F4R2_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F4R2_FB12 CAN_F4R2_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F4R2_FB13_Pos (13U) -#define CAN_F4R2_FB13_Msk (0x1U << CAN_F4R2_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F4R2_FB13 CAN_F4R2_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F4R2_FB14_Pos (14U) -#define CAN_F4R2_FB14_Msk (0x1U << CAN_F4R2_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F4R2_FB14 CAN_F4R2_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F4R2_FB15_Pos (15U) -#define CAN_F4R2_FB15_Msk (0x1U << CAN_F4R2_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F4R2_FB15 CAN_F4R2_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F4R2_FB16_Pos (16U) -#define CAN_F4R2_FB16_Msk (0x1U << CAN_F4R2_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F4R2_FB16 CAN_F4R2_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F4R2_FB17_Pos (17U) -#define CAN_F4R2_FB17_Msk (0x1U << CAN_F4R2_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F4R2_FB17 CAN_F4R2_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F4R2_FB18_Pos (18U) -#define CAN_F4R2_FB18_Msk (0x1U << CAN_F4R2_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F4R2_FB18 CAN_F4R2_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F4R2_FB19_Pos (19U) -#define CAN_F4R2_FB19_Msk (0x1U << CAN_F4R2_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F4R2_FB19 CAN_F4R2_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F4R2_FB20_Pos (20U) -#define CAN_F4R2_FB20_Msk (0x1U << CAN_F4R2_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F4R2_FB20 CAN_F4R2_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F4R2_FB21_Pos (21U) -#define CAN_F4R2_FB21_Msk (0x1U << CAN_F4R2_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F4R2_FB21 CAN_F4R2_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F4R2_FB22_Pos (22U) -#define CAN_F4R2_FB22_Msk (0x1U << CAN_F4R2_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F4R2_FB22 CAN_F4R2_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F4R2_FB23_Pos (23U) -#define CAN_F4R2_FB23_Msk (0x1U << CAN_F4R2_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F4R2_FB23 CAN_F4R2_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F4R2_FB24_Pos (24U) -#define CAN_F4R2_FB24_Msk (0x1U << CAN_F4R2_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F4R2_FB24 CAN_F4R2_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F4R2_FB25_Pos (25U) -#define CAN_F4R2_FB25_Msk (0x1U << CAN_F4R2_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F4R2_FB25 CAN_F4R2_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F4R2_FB26_Pos (26U) -#define CAN_F4R2_FB26_Msk (0x1U << CAN_F4R2_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F4R2_FB26 CAN_F4R2_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F4R2_FB27_Pos (27U) -#define CAN_F4R2_FB27_Msk (0x1U << CAN_F4R2_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F4R2_FB27 CAN_F4R2_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F4R2_FB28_Pos (28U) -#define CAN_F4R2_FB28_Msk (0x1U << CAN_F4R2_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F4R2_FB28 CAN_F4R2_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F4R2_FB29_Pos (29U) -#define CAN_F4R2_FB29_Msk (0x1U << CAN_F4R2_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F4R2_FB29 CAN_F4R2_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F4R2_FB30_Pos (30U) -#define CAN_F4R2_FB30_Msk (0x1U << CAN_F4R2_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F4R2_FB30 CAN_F4R2_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F4R2_FB31_Pos (31U) -#define CAN_F4R2_FB31_Msk (0x1U << CAN_F4R2_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F4R2_FB31 CAN_F4R2_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F5R2 register *******************/ -#define CAN_F5R2_FB0_Pos (0U) -#define CAN_F5R2_FB0_Msk (0x1U << CAN_F5R2_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F5R2_FB0 CAN_F5R2_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F5R2_FB1_Pos (1U) -#define CAN_F5R2_FB1_Msk (0x1U << CAN_F5R2_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F5R2_FB1 CAN_F5R2_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F5R2_FB2_Pos (2U) -#define CAN_F5R2_FB2_Msk (0x1U << CAN_F5R2_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F5R2_FB2 CAN_F5R2_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F5R2_FB3_Pos (3U) -#define CAN_F5R2_FB3_Msk (0x1U << CAN_F5R2_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F5R2_FB3 CAN_F5R2_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F5R2_FB4_Pos (4U) -#define CAN_F5R2_FB4_Msk (0x1U << CAN_F5R2_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F5R2_FB4 CAN_F5R2_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F5R2_FB5_Pos (5U) -#define CAN_F5R2_FB5_Msk (0x1U << CAN_F5R2_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F5R2_FB5 CAN_F5R2_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F5R2_FB6_Pos (6U) -#define CAN_F5R2_FB6_Msk (0x1U << CAN_F5R2_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F5R2_FB6 CAN_F5R2_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F5R2_FB7_Pos (7U) -#define CAN_F5R2_FB7_Msk (0x1U << CAN_F5R2_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F5R2_FB7 CAN_F5R2_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F5R2_FB8_Pos (8U) -#define CAN_F5R2_FB8_Msk (0x1U << CAN_F5R2_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F5R2_FB8 CAN_F5R2_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F5R2_FB9_Pos (9U) -#define CAN_F5R2_FB9_Msk (0x1U << CAN_F5R2_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F5R2_FB9 CAN_F5R2_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F5R2_FB10_Pos (10U) -#define CAN_F5R2_FB10_Msk (0x1U << CAN_F5R2_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F5R2_FB10 CAN_F5R2_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F5R2_FB11_Pos (11U) -#define CAN_F5R2_FB11_Msk (0x1U << CAN_F5R2_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F5R2_FB11 CAN_F5R2_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F5R2_FB12_Pos (12U) -#define CAN_F5R2_FB12_Msk (0x1U << CAN_F5R2_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F5R2_FB12 CAN_F5R2_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F5R2_FB13_Pos (13U) -#define CAN_F5R2_FB13_Msk (0x1U << CAN_F5R2_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F5R2_FB13 CAN_F5R2_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F5R2_FB14_Pos (14U) -#define CAN_F5R2_FB14_Msk (0x1U << CAN_F5R2_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F5R2_FB14 CAN_F5R2_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F5R2_FB15_Pos (15U) -#define CAN_F5R2_FB15_Msk (0x1U << CAN_F5R2_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F5R2_FB15 CAN_F5R2_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F5R2_FB16_Pos (16U) -#define CAN_F5R2_FB16_Msk (0x1U << CAN_F5R2_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F5R2_FB16 CAN_F5R2_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F5R2_FB17_Pos (17U) -#define CAN_F5R2_FB17_Msk (0x1U << CAN_F5R2_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F5R2_FB17 CAN_F5R2_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F5R2_FB18_Pos (18U) -#define CAN_F5R2_FB18_Msk (0x1U << CAN_F5R2_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F5R2_FB18 CAN_F5R2_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F5R2_FB19_Pos (19U) -#define CAN_F5R2_FB19_Msk (0x1U << CAN_F5R2_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F5R2_FB19 CAN_F5R2_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F5R2_FB20_Pos (20U) -#define CAN_F5R2_FB20_Msk (0x1U << CAN_F5R2_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F5R2_FB20 CAN_F5R2_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F5R2_FB21_Pos (21U) -#define CAN_F5R2_FB21_Msk (0x1U << CAN_F5R2_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F5R2_FB21 CAN_F5R2_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F5R2_FB22_Pos (22U) -#define CAN_F5R2_FB22_Msk (0x1U << CAN_F5R2_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F5R2_FB22 CAN_F5R2_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F5R2_FB23_Pos (23U) -#define CAN_F5R2_FB23_Msk (0x1U << CAN_F5R2_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F5R2_FB23 CAN_F5R2_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F5R2_FB24_Pos (24U) -#define CAN_F5R2_FB24_Msk (0x1U << CAN_F5R2_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F5R2_FB24 CAN_F5R2_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F5R2_FB25_Pos (25U) -#define CAN_F5R2_FB25_Msk (0x1U << CAN_F5R2_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F5R2_FB25 CAN_F5R2_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F5R2_FB26_Pos (26U) -#define CAN_F5R2_FB26_Msk (0x1U << CAN_F5R2_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F5R2_FB26 CAN_F5R2_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F5R2_FB27_Pos (27U) -#define CAN_F5R2_FB27_Msk (0x1U << CAN_F5R2_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F5R2_FB27 CAN_F5R2_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F5R2_FB28_Pos (28U) -#define CAN_F5R2_FB28_Msk (0x1U << CAN_F5R2_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F5R2_FB28 CAN_F5R2_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F5R2_FB29_Pos (29U) -#define CAN_F5R2_FB29_Msk (0x1U << CAN_F5R2_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F5R2_FB29 CAN_F5R2_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F5R2_FB30_Pos (30U) -#define CAN_F5R2_FB30_Msk (0x1U << CAN_F5R2_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F5R2_FB30 CAN_F5R2_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F5R2_FB31_Pos (31U) -#define CAN_F5R2_FB31_Msk (0x1U << CAN_F5R2_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F5R2_FB31 CAN_F5R2_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F6R2 register *******************/ -#define CAN_F6R2_FB0_Pos (0U) -#define CAN_F6R2_FB0_Msk (0x1U << CAN_F6R2_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F6R2_FB0 CAN_F6R2_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F6R2_FB1_Pos (1U) -#define CAN_F6R2_FB1_Msk (0x1U << CAN_F6R2_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F6R2_FB1 CAN_F6R2_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F6R2_FB2_Pos (2U) -#define CAN_F6R2_FB2_Msk (0x1U << CAN_F6R2_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F6R2_FB2 CAN_F6R2_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F6R2_FB3_Pos (3U) -#define CAN_F6R2_FB3_Msk (0x1U << CAN_F6R2_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F6R2_FB3 CAN_F6R2_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F6R2_FB4_Pos (4U) -#define CAN_F6R2_FB4_Msk (0x1U << CAN_F6R2_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F6R2_FB4 CAN_F6R2_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F6R2_FB5_Pos (5U) -#define CAN_F6R2_FB5_Msk (0x1U << CAN_F6R2_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F6R2_FB5 CAN_F6R2_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F6R2_FB6_Pos (6U) -#define CAN_F6R2_FB6_Msk (0x1U << CAN_F6R2_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F6R2_FB6 CAN_F6R2_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F6R2_FB7_Pos (7U) -#define CAN_F6R2_FB7_Msk (0x1U << CAN_F6R2_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F6R2_FB7 CAN_F6R2_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F6R2_FB8_Pos (8U) -#define CAN_F6R2_FB8_Msk (0x1U << CAN_F6R2_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F6R2_FB8 CAN_F6R2_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F6R2_FB9_Pos (9U) -#define CAN_F6R2_FB9_Msk (0x1U << CAN_F6R2_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F6R2_FB9 CAN_F6R2_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F6R2_FB10_Pos (10U) -#define CAN_F6R2_FB10_Msk (0x1U << CAN_F6R2_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F6R2_FB10 CAN_F6R2_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F6R2_FB11_Pos (11U) -#define CAN_F6R2_FB11_Msk (0x1U << CAN_F6R2_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F6R2_FB11 CAN_F6R2_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F6R2_FB12_Pos (12U) -#define CAN_F6R2_FB12_Msk (0x1U << CAN_F6R2_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F6R2_FB12 CAN_F6R2_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F6R2_FB13_Pos (13U) -#define CAN_F6R2_FB13_Msk (0x1U << CAN_F6R2_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F6R2_FB13 CAN_F6R2_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F6R2_FB14_Pos (14U) -#define CAN_F6R2_FB14_Msk (0x1U << CAN_F6R2_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F6R2_FB14 CAN_F6R2_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F6R2_FB15_Pos (15U) -#define CAN_F6R2_FB15_Msk (0x1U << CAN_F6R2_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F6R2_FB15 CAN_F6R2_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F6R2_FB16_Pos (16U) -#define CAN_F6R2_FB16_Msk (0x1U << CAN_F6R2_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F6R2_FB16 CAN_F6R2_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F6R2_FB17_Pos (17U) -#define CAN_F6R2_FB17_Msk (0x1U << CAN_F6R2_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F6R2_FB17 CAN_F6R2_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F6R2_FB18_Pos (18U) -#define CAN_F6R2_FB18_Msk (0x1U << CAN_F6R2_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F6R2_FB18 CAN_F6R2_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F6R2_FB19_Pos (19U) -#define CAN_F6R2_FB19_Msk (0x1U << CAN_F6R2_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F6R2_FB19 CAN_F6R2_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F6R2_FB20_Pos (20U) -#define CAN_F6R2_FB20_Msk (0x1U << CAN_F6R2_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F6R2_FB20 CAN_F6R2_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F6R2_FB21_Pos (21U) -#define CAN_F6R2_FB21_Msk (0x1U << CAN_F6R2_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F6R2_FB21 CAN_F6R2_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F6R2_FB22_Pos (22U) -#define CAN_F6R2_FB22_Msk (0x1U << CAN_F6R2_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F6R2_FB22 CAN_F6R2_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F6R2_FB23_Pos (23U) -#define CAN_F6R2_FB23_Msk (0x1U << CAN_F6R2_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F6R2_FB23 CAN_F6R2_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F6R2_FB24_Pos (24U) -#define CAN_F6R2_FB24_Msk (0x1U << CAN_F6R2_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F6R2_FB24 CAN_F6R2_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F6R2_FB25_Pos (25U) -#define CAN_F6R2_FB25_Msk (0x1U << CAN_F6R2_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F6R2_FB25 CAN_F6R2_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F6R2_FB26_Pos (26U) -#define CAN_F6R2_FB26_Msk (0x1U << CAN_F6R2_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F6R2_FB26 CAN_F6R2_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F6R2_FB27_Pos (27U) -#define CAN_F6R2_FB27_Msk (0x1U << CAN_F6R2_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F6R2_FB27 CAN_F6R2_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F6R2_FB28_Pos (28U) -#define CAN_F6R2_FB28_Msk (0x1U << CAN_F6R2_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F6R2_FB28 CAN_F6R2_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F6R2_FB29_Pos (29U) -#define CAN_F6R2_FB29_Msk (0x1U << CAN_F6R2_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F6R2_FB29 CAN_F6R2_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F6R2_FB30_Pos (30U) -#define CAN_F6R2_FB30_Msk (0x1U << CAN_F6R2_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F6R2_FB30 CAN_F6R2_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F6R2_FB31_Pos (31U) -#define CAN_F6R2_FB31_Msk (0x1U << CAN_F6R2_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F6R2_FB31 CAN_F6R2_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F7R2 register *******************/ -#define CAN_F7R2_FB0_Pos (0U) -#define CAN_F7R2_FB0_Msk (0x1U << CAN_F7R2_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F7R2_FB0 CAN_F7R2_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F7R2_FB1_Pos (1U) -#define CAN_F7R2_FB1_Msk (0x1U << CAN_F7R2_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F7R2_FB1 CAN_F7R2_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F7R2_FB2_Pos (2U) -#define CAN_F7R2_FB2_Msk (0x1U << CAN_F7R2_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F7R2_FB2 CAN_F7R2_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F7R2_FB3_Pos (3U) -#define CAN_F7R2_FB3_Msk (0x1U << CAN_F7R2_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F7R2_FB3 CAN_F7R2_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F7R2_FB4_Pos (4U) -#define CAN_F7R2_FB4_Msk (0x1U << CAN_F7R2_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F7R2_FB4 CAN_F7R2_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F7R2_FB5_Pos (5U) -#define CAN_F7R2_FB5_Msk (0x1U << CAN_F7R2_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F7R2_FB5 CAN_F7R2_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F7R2_FB6_Pos (6U) -#define CAN_F7R2_FB6_Msk (0x1U << CAN_F7R2_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F7R2_FB6 CAN_F7R2_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F7R2_FB7_Pos (7U) -#define CAN_F7R2_FB7_Msk (0x1U << CAN_F7R2_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F7R2_FB7 CAN_F7R2_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F7R2_FB8_Pos (8U) -#define CAN_F7R2_FB8_Msk (0x1U << CAN_F7R2_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F7R2_FB8 CAN_F7R2_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F7R2_FB9_Pos (9U) -#define CAN_F7R2_FB9_Msk (0x1U << CAN_F7R2_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F7R2_FB9 CAN_F7R2_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F7R2_FB10_Pos (10U) -#define CAN_F7R2_FB10_Msk (0x1U << CAN_F7R2_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F7R2_FB10 CAN_F7R2_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F7R2_FB11_Pos (11U) -#define CAN_F7R2_FB11_Msk (0x1U << CAN_F7R2_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F7R2_FB11 CAN_F7R2_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F7R2_FB12_Pos (12U) -#define CAN_F7R2_FB12_Msk (0x1U << CAN_F7R2_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F7R2_FB12 CAN_F7R2_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F7R2_FB13_Pos (13U) -#define CAN_F7R2_FB13_Msk (0x1U << CAN_F7R2_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F7R2_FB13 CAN_F7R2_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F7R2_FB14_Pos (14U) -#define CAN_F7R2_FB14_Msk (0x1U << CAN_F7R2_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F7R2_FB14 CAN_F7R2_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F7R2_FB15_Pos (15U) -#define CAN_F7R2_FB15_Msk (0x1U << CAN_F7R2_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F7R2_FB15 CAN_F7R2_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F7R2_FB16_Pos (16U) -#define CAN_F7R2_FB16_Msk (0x1U << CAN_F7R2_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F7R2_FB16 CAN_F7R2_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F7R2_FB17_Pos (17U) -#define CAN_F7R2_FB17_Msk (0x1U << CAN_F7R2_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F7R2_FB17 CAN_F7R2_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F7R2_FB18_Pos (18U) -#define CAN_F7R2_FB18_Msk (0x1U << CAN_F7R2_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F7R2_FB18 CAN_F7R2_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F7R2_FB19_Pos (19U) -#define CAN_F7R2_FB19_Msk (0x1U << CAN_F7R2_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F7R2_FB19 CAN_F7R2_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F7R2_FB20_Pos (20U) -#define CAN_F7R2_FB20_Msk (0x1U << CAN_F7R2_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F7R2_FB20 CAN_F7R2_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F7R2_FB21_Pos (21U) -#define CAN_F7R2_FB21_Msk (0x1U << CAN_F7R2_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F7R2_FB21 CAN_F7R2_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F7R2_FB22_Pos (22U) -#define CAN_F7R2_FB22_Msk (0x1U << CAN_F7R2_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F7R2_FB22 CAN_F7R2_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F7R2_FB23_Pos (23U) -#define CAN_F7R2_FB23_Msk (0x1U << CAN_F7R2_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F7R2_FB23 CAN_F7R2_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F7R2_FB24_Pos (24U) -#define CAN_F7R2_FB24_Msk (0x1U << CAN_F7R2_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F7R2_FB24 CAN_F7R2_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F7R2_FB25_Pos (25U) -#define CAN_F7R2_FB25_Msk (0x1U << CAN_F7R2_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F7R2_FB25 CAN_F7R2_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F7R2_FB26_Pos (26U) -#define CAN_F7R2_FB26_Msk (0x1U << CAN_F7R2_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F7R2_FB26 CAN_F7R2_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F7R2_FB27_Pos (27U) -#define CAN_F7R2_FB27_Msk (0x1U << CAN_F7R2_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F7R2_FB27 CAN_F7R2_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F7R2_FB28_Pos (28U) -#define CAN_F7R2_FB28_Msk (0x1U << CAN_F7R2_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F7R2_FB28 CAN_F7R2_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F7R2_FB29_Pos (29U) -#define CAN_F7R2_FB29_Msk (0x1U << CAN_F7R2_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F7R2_FB29 CAN_F7R2_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F7R2_FB30_Pos (30U) -#define CAN_F7R2_FB30_Msk (0x1U << CAN_F7R2_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F7R2_FB30 CAN_F7R2_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F7R2_FB31_Pos (31U) -#define CAN_F7R2_FB31_Msk (0x1U << CAN_F7R2_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F7R2_FB31 CAN_F7R2_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F8R2 register *******************/ -#define CAN_F8R2_FB0_Pos (0U) -#define CAN_F8R2_FB0_Msk (0x1U << CAN_F8R2_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F8R2_FB0 CAN_F8R2_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F8R2_FB1_Pos (1U) -#define CAN_F8R2_FB1_Msk (0x1U << CAN_F8R2_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F8R2_FB1 CAN_F8R2_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F8R2_FB2_Pos (2U) -#define CAN_F8R2_FB2_Msk (0x1U << CAN_F8R2_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F8R2_FB2 CAN_F8R2_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F8R2_FB3_Pos (3U) -#define CAN_F8R2_FB3_Msk (0x1U << CAN_F8R2_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F8R2_FB3 CAN_F8R2_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F8R2_FB4_Pos (4U) -#define CAN_F8R2_FB4_Msk (0x1U << CAN_F8R2_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F8R2_FB4 CAN_F8R2_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F8R2_FB5_Pos (5U) -#define CAN_F8R2_FB5_Msk (0x1U << CAN_F8R2_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F8R2_FB5 CAN_F8R2_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F8R2_FB6_Pos (6U) -#define CAN_F8R2_FB6_Msk (0x1U << CAN_F8R2_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F8R2_FB6 CAN_F8R2_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F8R2_FB7_Pos (7U) -#define CAN_F8R2_FB7_Msk (0x1U << CAN_F8R2_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F8R2_FB7 CAN_F8R2_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F8R2_FB8_Pos (8U) -#define CAN_F8R2_FB8_Msk (0x1U << CAN_F8R2_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F8R2_FB8 CAN_F8R2_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F8R2_FB9_Pos (9U) -#define CAN_F8R2_FB9_Msk (0x1U << CAN_F8R2_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F8R2_FB9 CAN_F8R2_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F8R2_FB10_Pos (10U) -#define CAN_F8R2_FB10_Msk (0x1U << CAN_F8R2_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F8R2_FB10 CAN_F8R2_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F8R2_FB11_Pos (11U) -#define CAN_F8R2_FB11_Msk (0x1U << CAN_F8R2_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F8R2_FB11 CAN_F8R2_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F8R2_FB12_Pos (12U) -#define CAN_F8R2_FB12_Msk (0x1U << CAN_F8R2_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F8R2_FB12 CAN_F8R2_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F8R2_FB13_Pos (13U) -#define CAN_F8R2_FB13_Msk (0x1U << CAN_F8R2_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F8R2_FB13 CAN_F8R2_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F8R2_FB14_Pos (14U) -#define CAN_F8R2_FB14_Msk (0x1U << CAN_F8R2_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F8R2_FB14 CAN_F8R2_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F8R2_FB15_Pos (15U) -#define CAN_F8R2_FB15_Msk (0x1U << CAN_F8R2_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F8R2_FB15 CAN_F8R2_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F8R2_FB16_Pos (16U) -#define CAN_F8R2_FB16_Msk (0x1U << CAN_F8R2_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F8R2_FB16 CAN_F8R2_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F8R2_FB17_Pos (17U) -#define CAN_F8R2_FB17_Msk (0x1U << CAN_F8R2_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F8R2_FB17 CAN_F8R2_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F8R2_FB18_Pos (18U) -#define CAN_F8R2_FB18_Msk (0x1U << CAN_F8R2_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F8R2_FB18 CAN_F8R2_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F8R2_FB19_Pos (19U) -#define CAN_F8R2_FB19_Msk (0x1U << CAN_F8R2_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F8R2_FB19 CAN_F8R2_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F8R2_FB20_Pos (20U) -#define CAN_F8R2_FB20_Msk (0x1U << CAN_F8R2_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F8R2_FB20 CAN_F8R2_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F8R2_FB21_Pos (21U) -#define CAN_F8R2_FB21_Msk (0x1U << CAN_F8R2_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F8R2_FB21 CAN_F8R2_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F8R2_FB22_Pos (22U) -#define CAN_F8R2_FB22_Msk (0x1U << CAN_F8R2_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F8R2_FB22 CAN_F8R2_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F8R2_FB23_Pos (23U) -#define CAN_F8R2_FB23_Msk (0x1U << CAN_F8R2_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F8R2_FB23 CAN_F8R2_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F8R2_FB24_Pos (24U) -#define CAN_F8R2_FB24_Msk (0x1U << CAN_F8R2_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F8R2_FB24 CAN_F8R2_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F8R2_FB25_Pos (25U) -#define CAN_F8R2_FB25_Msk (0x1U << CAN_F8R2_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F8R2_FB25 CAN_F8R2_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F8R2_FB26_Pos (26U) -#define CAN_F8R2_FB26_Msk (0x1U << CAN_F8R2_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F8R2_FB26 CAN_F8R2_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F8R2_FB27_Pos (27U) -#define CAN_F8R2_FB27_Msk (0x1U << CAN_F8R2_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F8R2_FB27 CAN_F8R2_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F8R2_FB28_Pos (28U) -#define CAN_F8R2_FB28_Msk (0x1U << CAN_F8R2_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F8R2_FB28 CAN_F8R2_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F8R2_FB29_Pos (29U) -#define CAN_F8R2_FB29_Msk (0x1U << CAN_F8R2_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F8R2_FB29 CAN_F8R2_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F8R2_FB30_Pos (30U) -#define CAN_F8R2_FB30_Msk (0x1U << CAN_F8R2_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F8R2_FB30 CAN_F8R2_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F8R2_FB31_Pos (31U) -#define CAN_F8R2_FB31_Msk (0x1U << CAN_F8R2_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F8R2_FB31 CAN_F8R2_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F9R2 register *******************/ -#define CAN_F9R2_FB0_Pos (0U) -#define CAN_F9R2_FB0_Msk (0x1U << CAN_F9R2_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F9R2_FB0 CAN_F9R2_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F9R2_FB1_Pos (1U) -#define CAN_F9R2_FB1_Msk (0x1U << CAN_F9R2_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F9R2_FB1 CAN_F9R2_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F9R2_FB2_Pos (2U) -#define CAN_F9R2_FB2_Msk (0x1U << CAN_F9R2_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F9R2_FB2 CAN_F9R2_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F9R2_FB3_Pos (3U) -#define CAN_F9R2_FB3_Msk (0x1U << CAN_F9R2_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F9R2_FB3 CAN_F9R2_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F9R2_FB4_Pos (4U) -#define CAN_F9R2_FB4_Msk (0x1U << CAN_F9R2_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F9R2_FB4 CAN_F9R2_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F9R2_FB5_Pos (5U) -#define CAN_F9R2_FB5_Msk (0x1U << CAN_F9R2_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F9R2_FB5 CAN_F9R2_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F9R2_FB6_Pos (6U) -#define CAN_F9R2_FB6_Msk (0x1U << CAN_F9R2_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F9R2_FB6 CAN_F9R2_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F9R2_FB7_Pos (7U) -#define CAN_F9R2_FB7_Msk (0x1U << CAN_F9R2_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F9R2_FB7 CAN_F9R2_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F9R2_FB8_Pos (8U) -#define CAN_F9R2_FB8_Msk (0x1U << CAN_F9R2_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F9R2_FB8 CAN_F9R2_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F9R2_FB9_Pos (9U) -#define CAN_F9R2_FB9_Msk (0x1U << CAN_F9R2_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F9R2_FB9 CAN_F9R2_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F9R2_FB10_Pos (10U) -#define CAN_F9R2_FB10_Msk (0x1U << CAN_F9R2_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F9R2_FB10 CAN_F9R2_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F9R2_FB11_Pos (11U) -#define CAN_F9R2_FB11_Msk (0x1U << CAN_F9R2_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F9R2_FB11 CAN_F9R2_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F9R2_FB12_Pos (12U) -#define CAN_F9R2_FB12_Msk (0x1U << CAN_F9R2_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F9R2_FB12 CAN_F9R2_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F9R2_FB13_Pos (13U) -#define CAN_F9R2_FB13_Msk (0x1U << CAN_F9R2_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F9R2_FB13 CAN_F9R2_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F9R2_FB14_Pos (14U) -#define CAN_F9R2_FB14_Msk (0x1U << CAN_F9R2_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F9R2_FB14 CAN_F9R2_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F9R2_FB15_Pos (15U) -#define CAN_F9R2_FB15_Msk (0x1U << CAN_F9R2_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F9R2_FB15 CAN_F9R2_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F9R2_FB16_Pos (16U) -#define CAN_F9R2_FB16_Msk (0x1U << CAN_F9R2_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F9R2_FB16 CAN_F9R2_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F9R2_FB17_Pos (17U) -#define CAN_F9R2_FB17_Msk (0x1U << CAN_F9R2_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F9R2_FB17 CAN_F9R2_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F9R2_FB18_Pos (18U) -#define CAN_F9R2_FB18_Msk (0x1U << CAN_F9R2_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F9R2_FB18 CAN_F9R2_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F9R2_FB19_Pos (19U) -#define CAN_F9R2_FB19_Msk (0x1U << CAN_F9R2_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F9R2_FB19 CAN_F9R2_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F9R2_FB20_Pos (20U) -#define CAN_F9R2_FB20_Msk (0x1U << CAN_F9R2_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F9R2_FB20 CAN_F9R2_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F9R2_FB21_Pos (21U) -#define CAN_F9R2_FB21_Msk (0x1U << CAN_F9R2_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F9R2_FB21 CAN_F9R2_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F9R2_FB22_Pos (22U) -#define CAN_F9R2_FB22_Msk (0x1U << CAN_F9R2_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F9R2_FB22 CAN_F9R2_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F9R2_FB23_Pos (23U) -#define CAN_F9R2_FB23_Msk (0x1U << CAN_F9R2_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F9R2_FB23 CAN_F9R2_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F9R2_FB24_Pos (24U) -#define CAN_F9R2_FB24_Msk (0x1U << CAN_F9R2_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F9R2_FB24 CAN_F9R2_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F9R2_FB25_Pos (25U) -#define CAN_F9R2_FB25_Msk (0x1U << CAN_F9R2_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F9R2_FB25 CAN_F9R2_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F9R2_FB26_Pos (26U) -#define CAN_F9R2_FB26_Msk (0x1U << CAN_F9R2_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F9R2_FB26 CAN_F9R2_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F9R2_FB27_Pos (27U) -#define CAN_F9R2_FB27_Msk (0x1U << CAN_F9R2_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F9R2_FB27 CAN_F9R2_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F9R2_FB28_Pos (28U) -#define CAN_F9R2_FB28_Msk (0x1U << CAN_F9R2_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F9R2_FB28 CAN_F9R2_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F9R2_FB29_Pos (29U) -#define CAN_F9R2_FB29_Msk (0x1U << CAN_F9R2_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F9R2_FB29 CAN_F9R2_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F9R2_FB30_Pos (30U) -#define CAN_F9R2_FB30_Msk (0x1U << CAN_F9R2_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F9R2_FB30 CAN_F9R2_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F9R2_FB31_Pos (31U) -#define CAN_F9R2_FB31_Msk (0x1U << CAN_F9R2_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F9R2_FB31 CAN_F9R2_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F10R2 register ******************/ -#define CAN_F10R2_FB0_Pos (0U) -#define CAN_F10R2_FB0_Msk (0x1U << CAN_F10R2_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F10R2_FB0 CAN_F10R2_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F10R2_FB1_Pos (1U) -#define CAN_F10R2_FB1_Msk (0x1U << CAN_F10R2_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F10R2_FB1 CAN_F10R2_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F10R2_FB2_Pos (2U) -#define CAN_F10R2_FB2_Msk (0x1U << CAN_F10R2_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F10R2_FB2 CAN_F10R2_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F10R2_FB3_Pos (3U) -#define CAN_F10R2_FB3_Msk (0x1U << CAN_F10R2_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F10R2_FB3 CAN_F10R2_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F10R2_FB4_Pos (4U) -#define CAN_F10R2_FB4_Msk (0x1U << CAN_F10R2_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F10R2_FB4 CAN_F10R2_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F10R2_FB5_Pos (5U) -#define CAN_F10R2_FB5_Msk (0x1U << CAN_F10R2_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F10R2_FB5 CAN_F10R2_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F10R2_FB6_Pos (6U) -#define CAN_F10R2_FB6_Msk (0x1U << CAN_F10R2_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F10R2_FB6 CAN_F10R2_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F10R2_FB7_Pos (7U) -#define CAN_F10R2_FB7_Msk (0x1U << CAN_F10R2_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F10R2_FB7 CAN_F10R2_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F10R2_FB8_Pos (8U) -#define CAN_F10R2_FB8_Msk (0x1U << CAN_F10R2_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F10R2_FB8 CAN_F10R2_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F10R2_FB9_Pos (9U) -#define CAN_F10R2_FB9_Msk (0x1U << CAN_F10R2_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F10R2_FB9 CAN_F10R2_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F10R2_FB10_Pos (10U) -#define CAN_F10R2_FB10_Msk (0x1U << CAN_F10R2_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F10R2_FB10 CAN_F10R2_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F10R2_FB11_Pos (11U) -#define CAN_F10R2_FB11_Msk (0x1U << CAN_F10R2_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F10R2_FB11 CAN_F10R2_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F10R2_FB12_Pos (12U) -#define CAN_F10R2_FB12_Msk (0x1U << CAN_F10R2_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F10R2_FB12 CAN_F10R2_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F10R2_FB13_Pos (13U) -#define CAN_F10R2_FB13_Msk (0x1U << CAN_F10R2_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F10R2_FB13 CAN_F10R2_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F10R2_FB14_Pos (14U) -#define CAN_F10R2_FB14_Msk (0x1U << CAN_F10R2_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F10R2_FB14 CAN_F10R2_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F10R2_FB15_Pos (15U) -#define CAN_F10R2_FB15_Msk (0x1U << CAN_F10R2_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F10R2_FB15 CAN_F10R2_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F10R2_FB16_Pos (16U) -#define CAN_F10R2_FB16_Msk (0x1U << CAN_F10R2_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F10R2_FB16 CAN_F10R2_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F10R2_FB17_Pos (17U) -#define CAN_F10R2_FB17_Msk (0x1U << CAN_F10R2_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F10R2_FB17 CAN_F10R2_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F10R2_FB18_Pos (18U) -#define CAN_F10R2_FB18_Msk (0x1U << CAN_F10R2_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F10R2_FB18 CAN_F10R2_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F10R2_FB19_Pos (19U) -#define CAN_F10R2_FB19_Msk (0x1U << CAN_F10R2_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F10R2_FB19 CAN_F10R2_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F10R2_FB20_Pos (20U) -#define CAN_F10R2_FB20_Msk (0x1U << CAN_F10R2_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F10R2_FB20 CAN_F10R2_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F10R2_FB21_Pos (21U) -#define CAN_F10R2_FB21_Msk (0x1U << CAN_F10R2_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F10R2_FB21 CAN_F10R2_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F10R2_FB22_Pos (22U) -#define CAN_F10R2_FB22_Msk (0x1U << CAN_F10R2_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F10R2_FB22 CAN_F10R2_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F10R2_FB23_Pos (23U) -#define CAN_F10R2_FB23_Msk (0x1U << CAN_F10R2_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F10R2_FB23 CAN_F10R2_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F10R2_FB24_Pos (24U) -#define CAN_F10R2_FB24_Msk (0x1U << CAN_F10R2_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F10R2_FB24 CAN_F10R2_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F10R2_FB25_Pos (25U) -#define CAN_F10R2_FB25_Msk (0x1U << CAN_F10R2_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F10R2_FB25 CAN_F10R2_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F10R2_FB26_Pos (26U) -#define CAN_F10R2_FB26_Msk (0x1U << CAN_F10R2_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F10R2_FB26 CAN_F10R2_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F10R2_FB27_Pos (27U) -#define CAN_F10R2_FB27_Msk (0x1U << CAN_F10R2_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F10R2_FB27 CAN_F10R2_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F10R2_FB28_Pos (28U) -#define CAN_F10R2_FB28_Msk (0x1U << CAN_F10R2_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F10R2_FB28 CAN_F10R2_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F10R2_FB29_Pos (29U) -#define CAN_F10R2_FB29_Msk (0x1U << CAN_F10R2_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F10R2_FB29 CAN_F10R2_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F10R2_FB30_Pos (30U) -#define CAN_F10R2_FB30_Msk (0x1U << CAN_F10R2_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F10R2_FB30 CAN_F10R2_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F10R2_FB31_Pos (31U) -#define CAN_F10R2_FB31_Msk (0x1U << CAN_F10R2_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F10R2_FB31 CAN_F10R2_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F11R2 register ******************/ -#define CAN_F11R2_FB0_Pos (0U) -#define CAN_F11R2_FB0_Msk (0x1U << CAN_F11R2_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F11R2_FB0 CAN_F11R2_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F11R2_FB1_Pos (1U) -#define CAN_F11R2_FB1_Msk (0x1U << CAN_F11R2_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F11R2_FB1 CAN_F11R2_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F11R2_FB2_Pos (2U) -#define CAN_F11R2_FB2_Msk (0x1U << CAN_F11R2_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F11R2_FB2 CAN_F11R2_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F11R2_FB3_Pos (3U) -#define CAN_F11R2_FB3_Msk (0x1U << CAN_F11R2_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F11R2_FB3 CAN_F11R2_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F11R2_FB4_Pos (4U) -#define CAN_F11R2_FB4_Msk (0x1U << CAN_F11R2_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F11R2_FB4 CAN_F11R2_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F11R2_FB5_Pos (5U) -#define CAN_F11R2_FB5_Msk (0x1U << CAN_F11R2_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F11R2_FB5 CAN_F11R2_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F11R2_FB6_Pos (6U) -#define CAN_F11R2_FB6_Msk (0x1U << CAN_F11R2_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F11R2_FB6 CAN_F11R2_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F11R2_FB7_Pos (7U) -#define CAN_F11R2_FB7_Msk (0x1U << CAN_F11R2_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F11R2_FB7 CAN_F11R2_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F11R2_FB8_Pos (8U) -#define CAN_F11R2_FB8_Msk (0x1U << CAN_F11R2_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F11R2_FB8 CAN_F11R2_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F11R2_FB9_Pos (9U) -#define CAN_F11R2_FB9_Msk (0x1U << CAN_F11R2_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F11R2_FB9 CAN_F11R2_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F11R2_FB10_Pos (10U) -#define CAN_F11R2_FB10_Msk (0x1U << CAN_F11R2_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F11R2_FB10 CAN_F11R2_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F11R2_FB11_Pos (11U) -#define CAN_F11R2_FB11_Msk (0x1U << CAN_F11R2_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F11R2_FB11 CAN_F11R2_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F11R2_FB12_Pos (12U) -#define CAN_F11R2_FB12_Msk (0x1U << CAN_F11R2_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F11R2_FB12 CAN_F11R2_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F11R2_FB13_Pos (13U) -#define CAN_F11R2_FB13_Msk (0x1U << CAN_F11R2_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F11R2_FB13 CAN_F11R2_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F11R2_FB14_Pos (14U) -#define CAN_F11R2_FB14_Msk (0x1U << CAN_F11R2_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F11R2_FB14 CAN_F11R2_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F11R2_FB15_Pos (15U) -#define CAN_F11R2_FB15_Msk (0x1U << CAN_F11R2_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F11R2_FB15 CAN_F11R2_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F11R2_FB16_Pos (16U) -#define CAN_F11R2_FB16_Msk (0x1U << CAN_F11R2_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F11R2_FB16 CAN_F11R2_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F11R2_FB17_Pos (17U) -#define CAN_F11R2_FB17_Msk (0x1U << CAN_F11R2_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F11R2_FB17 CAN_F11R2_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F11R2_FB18_Pos (18U) -#define CAN_F11R2_FB18_Msk (0x1U << CAN_F11R2_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F11R2_FB18 CAN_F11R2_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F11R2_FB19_Pos (19U) -#define CAN_F11R2_FB19_Msk (0x1U << CAN_F11R2_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F11R2_FB19 CAN_F11R2_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F11R2_FB20_Pos (20U) -#define CAN_F11R2_FB20_Msk (0x1U << CAN_F11R2_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F11R2_FB20 CAN_F11R2_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F11R2_FB21_Pos (21U) -#define CAN_F11R2_FB21_Msk (0x1U << CAN_F11R2_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F11R2_FB21 CAN_F11R2_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F11R2_FB22_Pos (22U) -#define CAN_F11R2_FB22_Msk (0x1U << CAN_F11R2_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F11R2_FB22 CAN_F11R2_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F11R2_FB23_Pos (23U) -#define CAN_F11R2_FB23_Msk (0x1U << CAN_F11R2_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F11R2_FB23 CAN_F11R2_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F11R2_FB24_Pos (24U) -#define CAN_F11R2_FB24_Msk (0x1U << CAN_F11R2_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F11R2_FB24 CAN_F11R2_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F11R2_FB25_Pos (25U) -#define CAN_F11R2_FB25_Msk (0x1U << CAN_F11R2_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F11R2_FB25 CAN_F11R2_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F11R2_FB26_Pos (26U) -#define CAN_F11R2_FB26_Msk (0x1U << CAN_F11R2_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F11R2_FB26 CAN_F11R2_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F11R2_FB27_Pos (27U) -#define CAN_F11R2_FB27_Msk (0x1U << CAN_F11R2_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F11R2_FB27 CAN_F11R2_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F11R2_FB28_Pos (28U) -#define CAN_F11R2_FB28_Msk (0x1U << CAN_F11R2_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F11R2_FB28 CAN_F11R2_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F11R2_FB29_Pos (29U) -#define CAN_F11R2_FB29_Msk (0x1U << CAN_F11R2_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F11R2_FB29 CAN_F11R2_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F11R2_FB30_Pos (30U) -#define CAN_F11R2_FB30_Msk (0x1U << CAN_F11R2_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F11R2_FB30 CAN_F11R2_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F11R2_FB31_Pos (31U) -#define CAN_F11R2_FB31_Msk (0x1U << CAN_F11R2_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F11R2_FB31 CAN_F11R2_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F12R2 register ******************/ -#define CAN_F12R2_FB0_Pos (0U) -#define CAN_F12R2_FB0_Msk (0x1U << CAN_F12R2_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F12R2_FB0 CAN_F12R2_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F12R2_FB1_Pos (1U) -#define CAN_F12R2_FB1_Msk (0x1U << CAN_F12R2_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F12R2_FB1 CAN_F12R2_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F12R2_FB2_Pos (2U) -#define CAN_F12R2_FB2_Msk (0x1U << CAN_F12R2_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F12R2_FB2 CAN_F12R2_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F12R2_FB3_Pos (3U) -#define CAN_F12R2_FB3_Msk (0x1U << CAN_F12R2_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F12R2_FB3 CAN_F12R2_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F12R2_FB4_Pos (4U) -#define CAN_F12R2_FB4_Msk (0x1U << CAN_F12R2_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F12R2_FB4 CAN_F12R2_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F12R2_FB5_Pos (5U) -#define CAN_F12R2_FB5_Msk (0x1U << CAN_F12R2_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F12R2_FB5 CAN_F12R2_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F12R2_FB6_Pos (6U) -#define CAN_F12R2_FB6_Msk (0x1U << CAN_F12R2_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F12R2_FB6 CAN_F12R2_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F12R2_FB7_Pos (7U) -#define CAN_F12R2_FB7_Msk (0x1U << CAN_F12R2_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F12R2_FB7 CAN_F12R2_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F12R2_FB8_Pos (8U) -#define CAN_F12R2_FB8_Msk (0x1U << CAN_F12R2_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F12R2_FB8 CAN_F12R2_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F12R2_FB9_Pos (9U) -#define CAN_F12R2_FB9_Msk (0x1U << CAN_F12R2_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F12R2_FB9 CAN_F12R2_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F12R2_FB10_Pos (10U) -#define CAN_F12R2_FB10_Msk (0x1U << CAN_F12R2_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F12R2_FB10 CAN_F12R2_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F12R2_FB11_Pos (11U) -#define CAN_F12R2_FB11_Msk (0x1U << CAN_F12R2_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F12R2_FB11 CAN_F12R2_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F12R2_FB12_Pos (12U) -#define CAN_F12R2_FB12_Msk (0x1U << CAN_F12R2_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F12R2_FB12 CAN_F12R2_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F12R2_FB13_Pos (13U) -#define CAN_F12R2_FB13_Msk (0x1U << CAN_F12R2_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F12R2_FB13 CAN_F12R2_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F12R2_FB14_Pos (14U) -#define CAN_F12R2_FB14_Msk (0x1U << CAN_F12R2_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F12R2_FB14 CAN_F12R2_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F12R2_FB15_Pos (15U) -#define CAN_F12R2_FB15_Msk (0x1U << CAN_F12R2_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F12R2_FB15 CAN_F12R2_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F12R2_FB16_Pos (16U) -#define CAN_F12R2_FB16_Msk (0x1U << CAN_F12R2_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F12R2_FB16 CAN_F12R2_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F12R2_FB17_Pos (17U) -#define CAN_F12R2_FB17_Msk (0x1U << CAN_F12R2_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F12R2_FB17 CAN_F12R2_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F12R2_FB18_Pos (18U) -#define CAN_F12R2_FB18_Msk (0x1U << CAN_F12R2_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F12R2_FB18 CAN_F12R2_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F12R2_FB19_Pos (19U) -#define CAN_F12R2_FB19_Msk (0x1U << CAN_F12R2_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F12R2_FB19 CAN_F12R2_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F12R2_FB20_Pos (20U) -#define CAN_F12R2_FB20_Msk (0x1U << CAN_F12R2_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F12R2_FB20 CAN_F12R2_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F12R2_FB21_Pos (21U) -#define CAN_F12R2_FB21_Msk (0x1U << CAN_F12R2_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F12R2_FB21 CAN_F12R2_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F12R2_FB22_Pos (22U) -#define CAN_F12R2_FB22_Msk (0x1U << CAN_F12R2_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F12R2_FB22 CAN_F12R2_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F12R2_FB23_Pos (23U) -#define CAN_F12R2_FB23_Msk (0x1U << CAN_F12R2_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F12R2_FB23 CAN_F12R2_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F12R2_FB24_Pos (24U) -#define CAN_F12R2_FB24_Msk (0x1U << CAN_F12R2_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F12R2_FB24 CAN_F12R2_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F12R2_FB25_Pos (25U) -#define CAN_F12R2_FB25_Msk (0x1U << CAN_F12R2_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F12R2_FB25 CAN_F12R2_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F12R2_FB26_Pos (26U) -#define CAN_F12R2_FB26_Msk (0x1U << CAN_F12R2_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F12R2_FB26 CAN_F12R2_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F12R2_FB27_Pos (27U) -#define CAN_F12R2_FB27_Msk (0x1U << CAN_F12R2_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F12R2_FB27 CAN_F12R2_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F12R2_FB28_Pos (28U) -#define CAN_F12R2_FB28_Msk (0x1U << CAN_F12R2_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F12R2_FB28 CAN_F12R2_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F12R2_FB29_Pos (29U) -#define CAN_F12R2_FB29_Msk (0x1U << CAN_F12R2_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F12R2_FB29 CAN_F12R2_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F12R2_FB30_Pos (30U) -#define CAN_F12R2_FB30_Msk (0x1U << CAN_F12R2_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F12R2_FB30 CAN_F12R2_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F12R2_FB31_Pos (31U) -#define CAN_F12R2_FB31_Msk (0x1U << CAN_F12R2_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F12R2_FB31 CAN_F12R2_FB31_Msk /*!< Filter bit 31 */ - -/******************* Bit definition for CAN_F13R2 register ******************/ -#define CAN_F13R2_FB0_Pos (0U) -#define CAN_F13R2_FB0_Msk (0x1U << CAN_F13R2_FB0_Pos) /*!< 0x00000001 */ -#define CAN_F13R2_FB0 CAN_F13R2_FB0_Msk /*!< Filter bit 0 */ -#define CAN_F13R2_FB1_Pos (1U) -#define CAN_F13R2_FB1_Msk (0x1U << CAN_F13R2_FB1_Pos) /*!< 0x00000002 */ -#define CAN_F13R2_FB1 CAN_F13R2_FB1_Msk /*!< Filter bit 1 */ -#define CAN_F13R2_FB2_Pos (2U) -#define CAN_F13R2_FB2_Msk (0x1U << CAN_F13R2_FB2_Pos) /*!< 0x00000004 */ -#define CAN_F13R2_FB2 CAN_F13R2_FB2_Msk /*!< Filter bit 2 */ -#define CAN_F13R2_FB3_Pos (3U) -#define CAN_F13R2_FB3_Msk (0x1U << CAN_F13R2_FB3_Pos) /*!< 0x00000008 */ -#define CAN_F13R2_FB3 CAN_F13R2_FB3_Msk /*!< Filter bit 3 */ -#define CAN_F13R2_FB4_Pos (4U) -#define CAN_F13R2_FB4_Msk (0x1U << CAN_F13R2_FB4_Pos) /*!< 0x00000010 */ -#define CAN_F13R2_FB4 CAN_F13R2_FB4_Msk /*!< Filter bit 4 */ -#define CAN_F13R2_FB5_Pos (5U) -#define CAN_F13R2_FB5_Msk (0x1U << CAN_F13R2_FB5_Pos) /*!< 0x00000020 */ -#define CAN_F13R2_FB5 CAN_F13R2_FB5_Msk /*!< Filter bit 5 */ -#define CAN_F13R2_FB6_Pos (6U) -#define CAN_F13R2_FB6_Msk (0x1U << CAN_F13R2_FB6_Pos) /*!< 0x00000040 */ -#define CAN_F13R2_FB6 CAN_F13R2_FB6_Msk /*!< Filter bit 6 */ -#define CAN_F13R2_FB7_Pos (7U) -#define CAN_F13R2_FB7_Msk (0x1U << CAN_F13R2_FB7_Pos) /*!< 0x00000080 */ -#define CAN_F13R2_FB7 CAN_F13R2_FB7_Msk /*!< Filter bit 7 */ -#define CAN_F13R2_FB8_Pos (8U) -#define CAN_F13R2_FB8_Msk (0x1U << CAN_F13R2_FB8_Pos) /*!< 0x00000100 */ -#define CAN_F13R2_FB8 CAN_F13R2_FB8_Msk /*!< Filter bit 8 */ -#define CAN_F13R2_FB9_Pos (9U) -#define CAN_F13R2_FB9_Msk (0x1U << CAN_F13R2_FB9_Pos) /*!< 0x00000200 */ -#define CAN_F13R2_FB9 CAN_F13R2_FB9_Msk /*!< Filter bit 9 */ -#define CAN_F13R2_FB10_Pos (10U) -#define CAN_F13R2_FB10_Msk (0x1U << CAN_F13R2_FB10_Pos) /*!< 0x00000400 */ -#define CAN_F13R2_FB10 CAN_F13R2_FB10_Msk /*!< Filter bit 10 */ -#define CAN_F13R2_FB11_Pos (11U) -#define CAN_F13R2_FB11_Msk (0x1U << CAN_F13R2_FB11_Pos) /*!< 0x00000800 */ -#define CAN_F13R2_FB11 CAN_F13R2_FB11_Msk /*!< Filter bit 11 */ -#define CAN_F13R2_FB12_Pos (12U) -#define CAN_F13R2_FB12_Msk (0x1U << CAN_F13R2_FB12_Pos) /*!< 0x00001000 */ -#define CAN_F13R2_FB12 CAN_F13R2_FB12_Msk /*!< Filter bit 12 */ -#define CAN_F13R2_FB13_Pos (13U) -#define CAN_F13R2_FB13_Msk (0x1U << CAN_F13R2_FB13_Pos) /*!< 0x00002000 */ -#define CAN_F13R2_FB13 CAN_F13R2_FB13_Msk /*!< Filter bit 13 */ -#define CAN_F13R2_FB14_Pos (14U) -#define CAN_F13R2_FB14_Msk (0x1U << CAN_F13R2_FB14_Pos) /*!< 0x00004000 */ -#define CAN_F13R2_FB14 CAN_F13R2_FB14_Msk /*!< Filter bit 14 */ -#define CAN_F13R2_FB15_Pos (15U) -#define CAN_F13R2_FB15_Msk (0x1U << CAN_F13R2_FB15_Pos) /*!< 0x00008000 */ -#define CAN_F13R2_FB15 CAN_F13R2_FB15_Msk /*!< Filter bit 15 */ -#define CAN_F13R2_FB16_Pos (16U) -#define CAN_F13R2_FB16_Msk (0x1U << CAN_F13R2_FB16_Pos) /*!< 0x00010000 */ -#define CAN_F13R2_FB16 CAN_F13R2_FB16_Msk /*!< Filter bit 16 */ -#define CAN_F13R2_FB17_Pos (17U) -#define CAN_F13R2_FB17_Msk (0x1U << CAN_F13R2_FB17_Pos) /*!< 0x00020000 */ -#define CAN_F13R2_FB17 CAN_F13R2_FB17_Msk /*!< Filter bit 17 */ -#define CAN_F13R2_FB18_Pos (18U) -#define CAN_F13R2_FB18_Msk (0x1U << CAN_F13R2_FB18_Pos) /*!< 0x00040000 */ -#define CAN_F13R2_FB18 CAN_F13R2_FB18_Msk /*!< Filter bit 18 */ -#define CAN_F13R2_FB19_Pos (19U) -#define CAN_F13R2_FB19_Msk (0x1U << CAN_F13R2_FB19_Pos) /*!< 0x00080000 */ -#define CAN_F13R2_FB19 CAN_F13R2_FB19_Msk /*!< Filter bit 19 */ -#define CAN_F13R2_FB20_Pos (20U) -#define CAN_F13R2_FB20_Msk (0x1U << CAN_F13R2_FB20_Pos) /*!< 0x00100000 */ -#define CAN_F13R2_FB20 CAN_F13R2_FB20_Msk /*!< Filter bit 20 */ -#define CAN_F13R2_FB21_Pos (21U) -#define CAN_F13R2_FB21_Msk (0x1U << CAN_F13R2_FB21_Pos) /*!< 0x00200000 */ -#define CAN_F13R2_FB21 CAN_F13R2_FB21_Msk /*!< Filter bit 21 */ -#define CAN_F13R2_FB22_Pos (22U) -#define CAN_F13R2_FB22_Msk (0x1U << CAN_F13R2_FB22_Pos) /*!< 0x00400000 */ -#define CAN_F13R2_FB22 CAN_F13R2_FB22_Msk /*!< Filter bit 22 */ -#define CAN_F13R2_FB23_Pos (23U) -#define CAN_F13R2_FB23_Msk (0x1U << CAN_F13R2_FB23_Pos) /*!< 0x00800000 */ -#define CAN_F13R2_FB23 CAN_F13R2_FB23_Msk /*!< Filter bit 23 */ -#define CAN_F13R2_FB24_Pos (24U) -#define CAN_F13R2_FB24_Msk (0x1U << CAN_F13R2_FB24_Pos) /*!< 0x01000000 */ -#define CAN_F13R2_FB24 CAN_F13R2_FB24_Msk /*!< Filter bit 24 */ -#define CAN_F13R2_FB25_Pos (25U) -#define CAN_F13R2_FB25_Msk (0x1U << CAN_F13R2_FB25_Pos) /*!< 0x02000000 */ -#define CAN_F13R2_FB25 CAN_F13R2_FB25_Msk /*!< Filter bit 25 */ -#define CAN_F13R2_FB26_Pos (26U) -#define CAN_F13R2_FB26_Msk (0x1U << CAN_F13R2_FB26_Pos) /*!< 0x04000000 */ -#define CAN_F13R2_FB26 CAN_F13R2_FB26_Msk /*!< Filter bit 26 */ -#define CAN_F13R2_FB27_Pos (27U) -#define CAN_F13R2_FB27_Msk (0x1U << CAN_F13R2_FB27_Pos) /*!< 0x08000000 */ -#define CAN_F13R2_FB27 CAN_F13R2_FB27_Msk /*!< Filter bit 27 */ -#define CAN_F13R2_FB28_Pos (28U) -#define CAN_F13R2_FB28_Msk (0x1U << CAN_F13R2_FB28_Pos) /*!< 0x10000000 */ -#define CAN_F13R2_FB28 CAN_F13R2_FB28_Msk /*!< Filter bit 28 */ -#define CAN_F13R2_FB29_Pos (29U) -#define CAN_F13R2_FB29_Msk (0x1U << CAN_F13R2_FB29_Pos) /*!< 0x20000000 */ -#define CAN_F13R2_FB29 CAN_F13R2_FB29_Msk /*!< Filter bit 29 */ -#define CAN_F13R2_FB30_Pos (30U) -#define CAN_F13R2_FB30_Msk (0x1U << CAN_F13R2_FB30_Pos) /*!< 0x40000000 */ -#define CAN_F13R2_FB30 CAN_F13R2_FB30_Msk /*!< Filter bit 30 */ -#define CAN_F13R2_FB31_Pos (31U) -#define CAN_F13R2_FB31_Msk (0x1U << CAN_F13R2_FB31_Pos) /*!< 0x80000000 */ -#define CAN_F13R2_FB31 CAN_F13R2_FB31_Msk /*!< Filter bit 31 */ - -/******************************************************************************/ -/* */ -/* Serial Peripheral Interface */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for SPI_CR1 register ********************/ -#define SPI_CR1_CPHA_Pos (0U) -#define SPI_CR1_CPHA_Msk (0x1U << SPI_CR1_CPHA_Pos) /*!< 0x00000001 */ -#define SPI_CR1_CPHA SPI_CR1_CPHA_Msk /*!< Clock Phase */ -#define SPI_CR1_CPOL_Pos (1U) -#define SPI_CR1_CPOL_Msk (0x1U << SPI_CR1_CPOL_Pos) /*!< 0x00000002 */ -#define SPI_CR1_CPOL SPI_CR1_CPOL_Msk /*!< Clock Polarity */ -#define SPI_CR1_MSTR_Pos (2U) -#define SPI_CR1_MSTR_Msk (0x1U << SPI_CR1_MSTR_Pos) /*!< 0x00000004 */ -#define SPI_CR1_MSTR SPI_CR1_MSTR_Msk /*!< Master Selection */ - -#define SPI_CR1_BR_Pos (3U) -#define SPI_CR1_BR_Msk (0x7U << SPI_CR1_BR_Pos) /*!< 0x00000038 */ -#define SPI_CR1_BR SPI_CR1_BR_Msk /*!< BR[2:0] bits (Baud Rate Control) */ -#define SPI_CR1_BR_0 (0x1U << SPI_CR1_BR_Pos) /*!< 0x00000008 */ -#define SPI_CR1_BR_1 (0x2U << SPI_CR1_BR_Pos) /*!< 0x00000010 */ -#define SPI_CR1_BR_2 (0x4U << SPI_CR1_BR_Pos) /*!< 0x00000020 */ - -#define SPI_CR1_SPE_Pos (6U) -#define SPI_CR1_SPE_Msk (0x1U << SPI_CR1_SPE_Pos) /*!< 0x00000040 */ -#define SPI_CR1_SPE SPI_CR1_SPE_Msk /*!< SPI Enable */ -#define SPI_CR1_LSBFIRST_Pos (7U) -#define SPI_CR1_LSBFIRST_Msk (0x1U << SPI_CR1_LSBFIRST_Pos) /*!< 0x00000080 */ -#define SPI_CR1_LSBFIRST SPI_CR1_LSBFIRST_Msk /*!< Frame Format */ -#define SPI_CR1_SSI_Pos (8U) -#define SPI_CR1_SSI_Msk (0x1U << SPI_CR1_SSI_Pos) /*!< 0x00000100 */ -#define SPI_CR1_SSI SPI_CR1_SSI_Msk /*!< Internal slave select */ -#define SPI_CR1_SSM_Pos (9U) -#define SPI_CR1_SSM_Msk (0x1U << SPI_CR1_SSM_Pos) /*!< 0x00000200 */ -#define SPI_CR1_SSM SPI_CR1_SSM_Msk /*!< Software slave management */ -#define SPI_CR1_RXONLY_Pos (10U) -#define SPI_CR1_RXONLY_Msk (0x1U << SPI_CR1_RXONLY_Pos) /*!< 0x00000400 */ -#define SPI_CR1_RXONLY SPI_CR1_RXONLY_Msk /*!< Receive only */ -#define SPI_CR1_DFF_Pos (11U) -#define SPI_CR1_DFF_Msk (0x1U << SPI_CR1_DFF_Pos) /*!< 0x00000800 */ -#define SPI_CR1_DFF SPI_CR1_DFF_Msk /*!< Data Frame Format */ -#define SPI_CR1_CRCNEXT_Pos (12U) -#define SPI_CR1_CRCNEXT_Msk (0x1U << SPI_CR1_CRCNEXT_Pos) /*!< 0x00001000 */ -#define SPI_CR1_CRCNEXT SPI_CR1_CRCNEXT_Msk /*!< Transmit CRC next */ -#define SPI_CR1_CRCEN_Pos (13U) -#define SPI_CR1_CRCEN_Msk (0x1U << SPI_CR1_CRCEN_Pos) /*!< 0x00002000 */ -#define SPI_CR1_CRCEN SPI_CR1_CRCEN_Msk /*!< Hardware CRC calculation enable */ -#define SPI_CR1_BIDIOE_Pos (14U) -#define SPI_CR1_BIDIOE_Msk (0x1U << SPI_CR1_BIDIOE_Pos) /*!< 0x00004000 */ -#define SPI_CR1_BIDIOE SPI_CR1_BIDIOE_Msk /*!< Output enable in bidirectional mode */ -#define SPI_CR1_BIDIMODE_Pos (15U) -#define SPI_CR1_BIDIMODE_Msk (0x1U << SPI_CR1_BIDIMODE_Pos) /*!< 0x00008000 */ -#define SPI_CR1_BIDIMODE SPI_CR1_BIDIMODE_Msk /*!< Bidirectional data mode enable */ - -/******************* Bit definition for SPI_CR2 register ********************/ -#define SPI_CR2_RXDMAEN_Pos (0U) -#define SPI_CR2_RXDMAEN_Msk (0x1U << SPI_CR2_RXDMAEN_Pos) /*!< 0x00000001 */ -#define SPI_CR2_RXDMAEN SPI_CR2_RXDMAEN_Msk /*!< Rx Buffer DMA Enable */ -#define SPI_CR2_TXDMAEN_Pos (1U) -#define SPI_CR2_TXDMAEN_Msk (0x1U << SPI_CR2_TXDMAEN_Pos) /*!< 0x00000002 */ -#define SPI_CR2_TXDMAEN SPI_CR2_TXDMAEN_Msk /*!< Tx Buffer DMA Enable */ -#define SPI_CR2_SSOE_Pos (2U) -#define SPI_CR2_SSOE_Msk (0x1U << SPI_CR2_SSOE_Pos) /*!< 0x00000004 */ -#define SPI_CR2_SSOE SPI_CR2_SSOE_Msk /*!< SS Output Enable */ -#define SPI_CR2_ERRIE_Pos (5U) -#define SPI_CR2_ERRIE_Msk (0x1U << SPI_CR2_ERRIE_Pos) /*!< 0x00000020 */ -#define SPI_CR2_ERRIE SPI_CR2_ERRIE_Msk /*!< Error Interrupt Enable */ -#define SPI_CR2_RXNEIE_Pos (6U) -#define SPI_CR2_RXNEIE_Msk (0x1U << SPI_CR2_RXNEIE_Pos) /*!< 0x00000040 */ -#define SPI_CR2_RXNEIE SPI_CR2_RXNEIE_Msk /*!< RX buffer Not Empty Interrupt Enable */ -#define SPI_CR2_TXEIE_Pos (7U) -#define SPI_CR2_TXEIE_Msk (0x1U << SPI_CR2_TXEIE_Pos) /*!< 0x00000080 */ -#define SPI_CR2_TXEIE SPI_CR2_TXEIE_Msk /*!< Tx buffer Empty Interrupt Enable */ - -/******************** Bit definition for SPI_SR register ********************/ -#define SPI_SR_RXNE_Pos (0U) -#define SPI_SR_RXNE_Msk (0x1U << SPI_SR_RXNE_Pos) /*!< 0x00000001 */ -#define SPI_SR_RXNE SPI_SR_RXNE_Msk /*!< Receive buffer Not Empty */ -#define SPI_SR_TXE_Pos (1U) -#define SPI_SR_TXE_Msk (0x1U << SPI_SR_TXE_Pos) /*!< 0x00000002 */ -#define SPI_SR_TXE SPI_SR_TXE_Msk /*!< Transmit buffer Empty */ -#define SPI_SR_CHSIDE_Pos (2U) -#define SPI_SR_CHSIDE_Msk (0x1U << SPI_SR_CHSIDE_Pos) /*!< 0x00000004 */ -#define SPI_SR_CHSIDE SPI_SR_CHSIDE_Msk /*!< Channel side */ -#define SPI_SR_UDR_Pos (3U) -#define SPI_SR_UDR_Msk (0x1U << SPI_SR_UDR_Pos) /*!< 0x00000008 */ -#define SPI_SR_UDR SPI_SR_UDR_Msk /*!< Underrun flag */ -#define SPI_SR_CRCERR_Pos (4U) -#define SPI_SR_CRCERR_Msk (0x1U << SPI_SR_CRCERR_Pos) /*!< 0x00000010 */ -#define SPI_SR_CRCERR SPI_SR_CRCERR_Msk /*!< CRC Error flag */ -#define SPI_SR_MODF_Pos (5U) -#define SPI_SR_MODF_Msk (0x1U << SPI_SR_MODF_Pos) /*!< 0x00000020 */ -#define SPI_SR_MODF SPI_SR_MODF_Msk /*!< Mode fault */ -#define SPI_SR_OVR_Pos (6U) -#define SPI_SR_OVR_Msk (0x1U << SPI_SR_OVR_Pos) /*!< 0x00000040 */ -#define SPI_SR_OVR SPI_SR_OVR_Msk /*!< Overrun flag */ -#define SPI_SR_BSY_Pos (7U) -#define SPI_SR_BSY_Msk (0x1U << SPI_SR_BSY_Pos) /*!< 0x00000080 */ -#define SPI_SR_BSY SPI_SR_BSY_Msk /*!< Busy flag */ - -/******************** Bit definition for SPI_DR register ********************/ -#define SPI_DR_DR_Pos (0U) -#define SPI_DR_DR_Msk (0xFFFFU << SPI_DR_DR_Pos) /*!< 0x0000FFFF */ -#define SPI_DR_DR SPI_DR_DR_Msk /*!< Data Register */ - -/******************* Bit definition for SPI_CRCPR register ******************/ -#define SPI_CRCPR_CRCPOLY_Pos (0U) -#define SPI_CRCPR_CRCPOLY_Msk (0xFFFFU << SPI_CRCPR_CRCPOLY_Pos) /*!< 0x0000FFFF */ -#define SPI_CRCPR_CRCPOLY SPI_CRCPR_CRCPOLY_Msk /*!< CRC polynomial register */ - -/****************** Bit definition for SPI_RXCRCR register ******************/ -#define SPI_RXCRCR_RXCRC_Pos (0U) -#define SPI_RXCRCR_RXCRC_Msk (0xFFFFU << SPI_RXCRCR_RXCRC_Pos) /*!< 0x0000FFFF */ -#define SPI_RXCRCR_RXCRC SPI_RXCRCR_RXCRC_Msk /*!< Rx CRC Register */ - -/****************** Bit definition for SPI_TXCRCR register ******************/ -#define SPI_TXCRCR_TXCRC_Pos (0U) -#define SPI_TXCRCR_TXCRC_Msk (0xFFFFU << SPI_TXCRCR_TXCRC_Pos) /*!< 0x0000FFFF */ -#define SPI_TXCRCR_TXCRC SPI_TXCRCR_TXCRC_Msk /*!< Tx CRC Register */ - -/****************** Bit definition for SPI_I2SCFGR register *****************/ -#define SPI_I2SCFGR_I2SMOD_Pos (11U) -#define SPI_I2SCFGR_I2SMOD_Msk (0x1U << SPI_I2SCFGR_I2SMOD_Pos) /*!< 0x00000800 */ -#define SPI_I2SCFGR_I2SMOD SPI_I2SCFGR_I2SMOD_Msk /*!< I2S mode selection */ - - -/******************************************************************************/ -/* */ -/* Inter-integrated Circuit Interface */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for I2C_CR1 register ********************/ -#define I2C_CR1_PE_Pos (0U) -#define I2C_CR1_PE_Msk (0x1U << I2C_CR1_PE_Pos) /*!< 0x00000001 */ -#define I2C_CR1_PE I2C_CR1_PE_Msk /*!< Peripheral Enable */ -#define I2C_CR1_SMBUS_Pos (1U) -#define I2C_CR1_SMBUS_Msk (0x1U << I2C_CR1_SMBUS_Pos) /*!< 0x00000002 */ -#define I2C_CR1_SMBUS I2C_CR1_SMBUS_Msk /*!< SMBus Mode */ -#define I2C_CR1_SMBTYPE_Pos (3U) -#define I2C_CR1_SMBTYPE_Msk (0x1U << I2C_CR1_SMBTYPE_Pos) /*!< 0x00000008 */ -#define I2C_CR1_SMBTYPE I2C_CR1_SMBTYPE_Msk /*!< SMBus Type */ -#define I2C_CR1_ENARP_Pos (4U) -#define I2C_CR1_ENARP_Msk (0x1U << I2C_CR1_ENARP_Pos) /*!< 0x00000010 */ -#define I2C_CR1_ENARP I2C_CR1_ENARP_Msk /*!< ARP Enable */ -#define I2C_CR1_ENPEC_Pos (5U) -#define I2C_CR1_ENPEC_Msk (0x1U << I2C_CR1_ENPEC_Pos) /*!< 0x00000020 */ -#define I2C_CR1_ENPEC I2C_CR1_ENPEC_Msk /*!< PEC Enable */ -#define I2C_CR1_ENGC_Pos (6U) -#define I2C_CR1_ENGC_Msk (0x1U << I2C_CR1_ENGC_Pos) /*!< 0x00000040 */ -#define I2C_CR1_ENGC I2C_CR1_ENGC_Msk /*!< General Call Enable */ -#define I2C_CR1_NOSTRETCH_Pos (7U) -#define I2C_CR1_NOSTRETCH_Msk (0x1U << I2C_CR1_NOSTRETCH_Pos) /*!< 0x00000080 */ -#define I2C_CR1_NOSTRETCH I2C_CR1_NOSTRETCH_Msk /*!< Clock Stretching Disable (Slave mode) */ -#define I2C_CR1_START_Pos (8U) -#define I2C_CR1_START_Msk (0x1U << I2C_CR1_START_Pos) /*!< 0x00000100 */ -#define I2C_CR1_START I2C_CR1_START_Msk /*!< Start Generation */ -#define I2C_CR1_STOP_Pos (9U) -#define I2C_CR1_STOP_Msk (0x1U << I2C_CR1_STOP_Pos) /*!< 0x00000200 */ -#define I2C_CR1_STOP I2C_CR1_STOP_Msk /*!< Stop Generation */ -#define I2C_CR1_ACK_Pos (10U) -#define I2C_CR1_ACK_Msk (0x1U << I2C_CR1_ACK_Pos) /*!< 0x00000400 */ -#define I2C_CR1_ACK I2C_CR1_ACK_Msk /*!< Acknowledge Enable */ -#define I2C_CR1_POS_Pos (11U) -#define I2C_CR1_POS_Msk (0x1U << I2C_CR1_POS_Pos) /*!< 0x00000800 */ -#define I2C_CR1_POS I2C_CR1_POS_Msk /*!< Acknowledge/PEC Position (for data reception) */ -#define I2C_CR1_PEC_Pos (12U) -#define I2C_CR1_PEC_Msk (0x1U << I2C_CR1_PEC_Pos) /*!< 0x00001000 */ -#define I2C_CR1_PEC I2C_CR1_PEC_Msk /*!< Packet Error Checking */ -#define I2C_CR1_ALERT_Pos (13U) -#define I2C_CR1_ALERT_Msk (0x1U << I2C_CR1_ALERT_Pos) /*!< 0x00002000 */ -#define I2C_CR1_ALERT I2C_CR1_ALERT_Msk /*!< SMBus Alert */ -#define I2C_CR1_SWRST_Pos (15U) -#define I2C_CR1_SWRST_Msk (0x1U << I2C_CR1_SWRST_Pos) /*!< 0x00008000 */ -#define I2C_CR1_SWRST I2C_CR1_SWRST_Msk /*!< Software Reset */ - -/******************* Bit definition for I2C_CR2 register ********************/ -#define I2C_CR2_FREQ_Pos (0U) -#define I2C_CR2_FREQ_Msk (0x3FU << I2C_CR2_FREQ_Pos) /*!< 0x0000003F */ -#define I2C_CR2_FREQ I2C_CR2_FREQ_Msk /*!< FREQ[5:0] bits (Peripheral Clock Frequency) */ -#define I2C_CR2_FREQ_0 (0x01U << I2C_CR2_FREQ_Pos) /*!< 0x00000001 */ -#define I2C_CR2_FREQ_1 (0x02U << I2C_CR2_FREQ_Pos) /*!< 0x00000002 */ -#define I2C_CR2_FREQ_2 (0x04U << I2C_CR2_FREQ_Pos) /*!< 0x00000004 */ -#define I2C_CR2_FREQ_3 (0x08U << I2C_CR2_FREQ_Pos) /*!< 0x00000008 */ -#define I2C_CR2_FREQ_4 (0x10U << I2C_CR2_FREQ_Pos) /*!< 0x00000010 */ -#define I2C_CR2_FREQ_5 (0x20U << I2C_CR2_FREQ_Pos) /*!< 0x00000020 */ - -#define I2C_CR2_ITERREN_Pos (8U) -#define I2C_CR2_ITERREN_Msk (0x1U << I2C_CR2_ITERREN_Pos) /*!< 0x00000100 */ -#define I2C_CR2_ITERREN I2C_CR2_ITERREN_Msk /*!< Error Interrupt Enable */ -#define I2C_CR2_ITEVTEN_Pos (9U) -#define I2C_CR2_ITEVTEN_Msk (0x1U << I2C_CR2_ITEVTEN_Pos) /*!< 0x00000200 */ -#define I2C_CR2_ITEVTEN I2C_CR2_ITEVTEN_Msk /*!< Event Interrupt Enable */ -#define I2C_CR2_ITBUFEN_Pos (10U) -#define I2C_CR2_ITBUFEN_Msk (0x1U << I2C_CR2_ITBUFEN_Pos) /*!< 0x00000400 */ -#define I2C_CR2_ITBUFEN I2C_CR2_ITBUFEN_Msk /*!< Buffer Interrupt Enable */ -#define I2C_CR2_DMAEN_Pos (11U) -#define I2C_CR2_DMAEN_Msk (0x1U << I2C_CR2_DMAEN_Pos) /*!< 0x00000800 */ -#define I2C_CR2_DMAEN I2C_CR2_DMAEN_Msk /*!< DMA Requests Enable */ -#define I2C_CR2_LAST_Pos (12U) -#define I2C_CR2_LAST_Msk (0x1U << I2C_CR2_LAST_Pos) /*!< 0x00001000 */ -#define I2C_CR2_LAST I2C_CR2_LAST_Msk /*!< DMA Last Transfer */ - -/******************* Bit definition for I2C_OAR1 register *******************/ -#define I2C_OAR1_ADD1_7 ((uint32_t)0x000000FE) /*!< Interface Address */ -#define I2C_OAR1_ADD8_9 ((uint32_t)0x00000300) /*!< Interface Address */ - -#define I2C_OAR1_ADD0_Pos (0U) -#define I2C_OAR1_ADD0_Msk (0x1U << I2C_OAR1_ADD0_Pos) /*!< 0x00000001 */ -#define I2C_OAR1_ADD0 I2C_OAR1_ADD0_Msk /*!< Bit 0 */ -#define I2C_OAR1_ADD1_Pos (1U) -#define I2C_OAR1_ADD1_Msk (0x1U << I2C_OAR1_ADD1_Pos) /*!< 0x00000002 */ -#define I2C_OAR1_ADD1 I2C_OAR1_ADD1_Msk /*!< Bit 1 */ -#define I2C_OAR1_ADD2_Pos (2U) -#define I2C_OAR1_ADD2_Msk (0x1U << I2C_OAR1_ADD2_Pos) /*!< 0x00000004 */ -#define I2C_OAR1_ADD2 I2C_OAR1_ADD2_Msk /*!< Bit 2 */ -#define I2C_OAR1_ADD3_Pos (3U) -#define I2C_OAR1_ADD3_Msk (0x1U << I2C_OAR1_ADD3_Pos) /*!< 0x00000008 */ -#define I2C_OAR1_ADD3 I2C_OAR1_ADD3_Msk /*!< Bit 3 */ -#define I2C_OAR1_ADD4_Pos (4U) -#define I2C_OAR1_ADD4_Msk (0x1U << I2C_OAR1_ADD4_Pos) /*!< 0x00000010 */ -#define I2C_OAR1_ADD4 I2C_OAR1_ADD4_Msk /*!< Bit 4 */ -#define I2C_OAR1_ADD5_Pos (5U) -#define I2C_OAR1_ADD5_Msk (0x1U << I2C_OAR1_ADD5_Pos) /*!< 0x00000020 */ -#define I2C_OAR1_ADD5 I2C_OAR1_ADD5_Msk /*!< Bit 5 */ -#define I2C_OAR1_ADD6_Pos (6U) -#define I2C_OAR1_ADD6_Msk (0x1U << I2C_OAR1_ADD6_Pos) /*!< 0x00000040 */ -#define I2C_OAR1_ADD6 I2C_OAR1_ADD6_Msk /*!< Bit 6 */ -#define I2C_OAR1_ADD7_Pos (7U) -#define I2C_OAR1_ADD7_Msk (0x1U << I2C_OAR1_ADD7_Pos) /*!< 0x00000080 */ -#define I2C_OAR1_ADD7 I2C_OAR1_ADD7_Msk /*!< Bit 7 */ -#define I2C_OAR1_ADD8_Pos (8U) -#define I2C_OAR1_ADD8_Msk (0x1U << I2C_OAR1_ADD8_Pos) /*!< 0x00000100 */ -#define I2C_OAR1_ADD8 I2C_OAR1_ADD8_Msk /*!< Bit 8 */ -#define I2C_OAR1_ADD9_Pos (9U) -#define I2C_OAR1_ADD9_Msk (0x1U << I2C_OAR1_ADD9_Pos) /*!< 0x00000200 */ -#define I2C_OAR1_ADD9 I2C_OAR1_ADD9_Msk /*!< Bit 9 */ - -#define I2C_OAR1_ADDMODE_Pos (15U) -#define I2C_OAR1_ADDMODE_Msk (0x1U << I2C_OAR1_ADDMODE_Pos) /*!< 0x00008000 */ -#define I2C_OAR1_ADDMODE I2C_OAR1_ADDMODE_Msk /*!< Addressing Mode (Slave mode) */ - -/******************* Bit definition for I2C_OAR2 register *******************/ -#define I2C_OAR2_ENDUAL_Pos (0U) -#define I2C_OAR2_ENDUAL_Msk (0x1U << I2C_OAR2_ENDUAL_Pos) /*!< 0x00000001 */ -#define I2C_OAR2_ENDUAL I2C_OAR2_ENDUAL_Msk /*!< Dual addressing mode enable */ -#define I2C_OAR2_ADD2_Pos (1U) -#define I2C_OAR2_ADD2_Msk (0x7FU << I2C_OAR2_ADD2_Pos) /*!< 0x000000FE */ -#define I2C_OAR2_ADD2 I2C_OAR2_ADD2_Msk /*!< Interface address */ - -/******************* Bit definition for I2C_SR1 register ********************/ -#define I2C_SR1_SB_Pos (0U) -#define I2C_SR1_SB_Msk (0x1U << I2C_SR1_SB_Pos) /*!< 0x00000001 */ -#define I2C_SR1_SB I2C_SR1_SB_Msk /*!< Start Bit (Master mode) */ -#define I2C_SR1_ADDR_Pos (1U) -#define I2C_SR1_ADDR_Msk (0x1U << I2C_SR1_ADDR_Pos) /*!< 0x00000002 */ -#define I2C_SR1_ADDR I2C_SR1_ADDR_Msk /*!< Address sent (master mode)/matched (slave mode) */ -#define I2C_SR1_BTF_Pos (2U) -#define I2C_SR1_BTF_Msk (0x1U << I2C_SR1_BTF_Pos) /*!< 0x00000004 */ -#define I2C_SR1_BTF I2C_SR1_BTF_Msk /*!< Byte Transfer Finished */ -#define I2C_SR1_ADD10_Pos (3U) -#define I2C_SR1_ADD10_Msk (0x1U << I2C_SR1_ADD10_Pos) /*!< 0x00000008 */ -#define I2C_SR1_ADD10 I2C_SR1_ADD10_Msk /*!< 10-bit header sent (Master mode) */ -#define I2C_SR1_STOPF_Pos (4U) -#define I2C_SR1_STOPF_Msk (0x1U << I2C_SR1_STOPF_Pos) /*!< 0x00000010 */ -#define I2C_SR1_STOPF I2C_SR1_STOPF_Msk /*!< Stop detection (Slave mode) */ -#define I2C_SR1_RXNE_Pos (6U) -#define I2C_SR1_RXNE_Msk (0x1U << I2C_SR1_RXNE_Pos) /*!< 0x00000040 */ -#define I2C_SR1_RXNE I2C_SR1_RXNE_Msk /*!< Data Register not Empty (receivers) */ -#define I2C_SR1_TXE_Pos (7U) -#define I2C_SR1_TXE_Msk (0x1U << I2C_SR1_TXE_Pos) /*!< 0x00000080 */ -#define I2C_SR1_TXE I2C_SR1_TXE_Msk /*!< Data Register Empty (transmitters) */ -#define I2C_SR1_BERR_Pos (8U) -#define I2C_SR1_BERR_Msk (0x1U << I2C_SR1_BERR_Pos) /*!< 0x00000100 */ -#define I2C_SR1_BERR I2C_SR1_BERR_Msk /*!< Bus Error */ -#define I2C_SR1_ARLO_Pos (9U) -#define I2C_SR1_ARLO_Msk (0x1U << I2C_SR1_ARLO_Pos) /*!< 0x00000200 */ -#define I2C_SR1_ARLO I2C_SR1_ARLO_Msk /*!< Arbitration Lost (master mode) */ -#define I2C_SR1_AF_Pos (10U) -#define I2C_SR1_AF_Msk (0x1U << I2C_SR1_AF_Pos) /*!< 0x00000400 */ -#define I2C_SR1_AF I2C_SR1_AF_Msk /*!< Acknowledge Failure */ -#define I2C_SR1_OVR_Pos (11U) -#define I2C_SR1_OVR_Msk (0x1U << I2C_SR1_OVR_Pos) /*!< 0x00000800 */ -#define I2C_SR1_OVR I2C_SR1_OVR_Msk /*!< Overrun/Underrun */ -#define I2C_SR1_PECERR_Pos (12U) -#define I2C_SR1_PECERR_Msk (0x1U << I2C_SR1_PECERR_Pos) /*!< 0x00001000 */ -#define I2C_SR1_PECERR I2C_SR1_PECERR_Msk /*!< PEC Error in reception */ -#define I2C_SR1_TIMEOUT_Pos (14U) -#define I2C_SR1_TIMEOUT_Msk (0x1U << I2C_SR1_TIMEOUT_Pos) /*!< 0x00004000 */ -#define I2C_SR1_TIMEOUT I2C_SR1_TIMEOUT_Msk /*!< Timeout or Tlow Error */ -#define I2C_SR1_SMBALERT_Pos (15U) -#define I2C_SR1_SMBALERT_Msk (0x1U << I2C_SR1_SMBALERT_Pos) /*!< 0x00008000 */ -#define I2C_SR1_SMBALERT I2C_SR1_SMBALERT_Msk /*!< SMBus Alert */ - -/******************* Bit definition for I2C_SR2 register ********************/ -#define I2C_SR2_MSL_Pos (0U) -#define I2C_SR2_MSL_Msk (0x1U << I2C_SR2_MSL_Pos) /*!< 0x00000001 */ -#define I2C_SR2_MSL I2C_SR2_MSL_Msk /*!< Master/Slave */ -#define I2C_SR2_BUSY_Pos (1U) -#define I2C_SR2_BUSY_Msk (0x1U << I2C_SR2_BUSY_Pos) /*!< 0x00000002 */ -#define I2C_SR2_BUSY I2C_SR2_BUSY_Msk /*!< Bus Busy */ -#define I2C_SR2_TRA_Pos (2U) -#define I2C_SR2_TRA_Msk (0x1U << I2C_SR2_TRA_Pos) /*!< 0x00000004 */ -#define I2C_SR2_TRA I2C_SR2_TRA_Msk /*!< Transmitter/Receiver */ -#define I2C_SR2_GENCALL_Pos (4U) -#define I2C_SR2_GENCALL_Msk (0x1U << I2C_SR2_GENCALL_Pos) /*!< 0x00000010 */ -#define I2C_SR2_GENCALL I2C_SR2_GENCALL_Msk /*!< General Call Address (Slave mode) */ -#define I2C_SR2_SMBDEFAULT_Pos (5U) -#define I2C_SR2_SMBDEFAULT_Msk (0x1U << I2C_SR2_SMBDEFAULT_Pos) /*!< 0x00000020 */ -#define I2C_SR2_SMBDEFAULT I2C_SR2_SMBDEFAULT_Msk /*!< SMBus Device Default Address (Slave mode) */ -#define I2C_SR2_SMBHOST_Pos (6U) -#define I2C_SR2_SMBHOST_Msk (0x1U << I2C_SR2_SMBHOST_Pos) /*!< 0x00000040 */ -#define I2C_SR2_SMBHOST I2C_SR2_SMBHOST_Msk /*!< SMBus Host Header (Slave mode) */ -#define I2C_SR2_DUALF_Pos (7U) -#define I2C_SR2_DUALF_Msk (0x1U << I2C_SR2_DUALF_Pos) /*!< 0x00000080 */ -#define I2C_SR2_DUALF I2C_SR2_DUALF_Msk /*!< Dual Flag (Slave mode) */ -#define I2C_SR2_PEC_Pos (8U) -#define I2C_SR2_PEC_Msk (0xFFU << I2C_SR2_PEC_Pos) /*!< 0x0000FF00 */ -#define I2C_SR2_PEC I2C_SR2_PEC_Msk /*!< Packet Error Checking Register */ - -/******************* Bit definition for I2C_CCR register ********************/ -#define I2C_CCR_CCR_Pos (0U) -#define I2C_CCR_CCR_Msk (0xFFFU << I2C_CCR_CCR_Pos) /*!< 0x00000FFF */ -#define I2C_CCR_CCR I2C_CCR_CCR_Msk /*!< Clock Control Register in Fast/Standard mode (Master mode) */ -#define I2C_CCR_DUTY_Pos (14U) -#define I2C_CCR_DUTY_Msk (0x1U << I2C_CCR_DUTY_Pos) /*!< 0x00004000 */ -#define I2C_CCR_DUTY I2C_CCR_DUTY_Msk /*!< Fast Mode Duty Cycle */ -#define I2C_CCR_FS_Pos (15U) -#define I2C_CCR_FS_Msk (0x1U << I2C_CCR_FS_Pos) /*!< 0x00008000 */ -#define I2C_CCR_FS I2C_CCR_FS_Msk /*!< I2C Master Mode Selection */ - -/****************** Bit definition for I2C_TRISE register *******************/ -#define I2C_TRISE_TRISE_Pos (0U) -#define I2C_TRISE_TRISE_Msk (0x3FU << I2C_TRISE_TRISE_Pos) /*!< 0x0000003F */ -#define I2C_TRISE_TRISE I2C_TRISE_TRISE_Msk /*!< Maximum Rise Time in Fast/Standard mode (Master mode) */ - -/******************************************************************************/ -/* */ -/* Universal Synchronous Asynchronous Receiver Transmitter */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for USART_SR register *******************/ -#define USART_SR_PE_Pos (0U) -#define USART_SR_PE_Msk (0x1U << USART_SR_PE_Pos) /*!< 0x00000001 */ -#define USART_SR_PE USART_SR_PE_Msk /*!< Parity Error */ -#define USART_SR_FE_Pos (1U) -#define USART_SR_FE_Msk (0x1U << USART_SR_FE_Pos) /*!< 0x00000002 */ -#define USART_SR_FE USART_SR_FE_Msk /*!< Framing Error */ -#define USART_SR_NE_Pos (2U) -#define USART_SR_NE_Msk (0x1U << USART_SR_NE_Pos) /*!< 0x00000004 */ -#define USART_SR_NE USART_SR_NE_Msk /*!< Noise Error Flag */ -#define USART_SR_ORE_Pos (3U) -#define USART_SR_ORE_Msk (0x1U << USART_SR_ORE_Pos) /*!< 0x00000008 */ -#define USART_SR_ORE USART_SR_ORE_Msk /*!< OverRun Error */ -#define USART_SR_IDLE_Pos (4U) -#define USART_SR_IDLE_Msk (0x1U << USART_SR_IDLE_Pos) /*!< 0x00000010 */ -#define USART_SR_IDLE USART_SR_IDLE_Msk /*!< IDLE line detected */ -#define USART_SR_RXNE_Pos (5U) -#define USART_SR_RXNE_Msk (0x1U << USART_SR_RXNE_Pos) /*!< 0x00000020 */ -#define USART_SR_RXNE USART_SR_RXNE_Msk /*!< Read Data Register Not Empty */ -#define USART_SR_TC_Pos (6U) -#define USART_SR_TC_Msk (0x1U << USART_SR_TC_Pos) /*!< 0x00000040 */ -#define USART_SR_TC USART_SR_TC_Msk /*!< Transmission Complete */ -#define USART_SR_TXE_Pos (7U) -#define USART_SR_TXE_Msk (0x1U << USART_SR_TXE_Pos) /*!< 0x00000080 */ -#define USART_SR_TXE USART_SR_TXE_Msk /*!< Transmit Data Register Empty */ -#define USART_SR_LBD_Pos (8U) -#define USART_SR_LBD_Msk (0x1U << USART_SR_LBD_Pos) /*!< 0x00000100 */ -#define USART_SR_LBD USART_SR_LBD_Msk /*!< LIN Break Detection Flag */ -#define USART_SR_CTS_Pos (9U) -#define USART_SR_CTS_Msk (0x1U << USART_SR_CTS_Pos) /*!< 0x00000200 */ -#define USART_SR_CTS USART_SR_CTS_Msk /*!< CTS Flag */ - -/******************* Bit definition for USART_DR register *******************/ -#define USART_DR_DR_Pos (0U) -#define USART_DR_DR_Msk (0x1FFU << USART_DR_DR_Pos) /*!< 0x000001FF */ -#define USART_DR_DR USART_DR_DR_Msk /*!< Data value */ - -/****************** Bit definition for USART_BRR register *******************/ -#define USART_BRR_DIV_Fraction_Pos (0U) -#define USART_BRR_DIV_Fraction_Msk (0xFU << USART_BRR_DIV_Fraction_Pos) /*!< 0x0000000F */ -#define USART_BRR_DIV_Fraction USART_BRR_DIV_Fraction_Msk /*!< Fraction of USARTDIV */ -#define USART_BRR_DIV_Mantissa_Pos (4U) -#define USART_BRR_DIV_Mantissa_Msk (0xFFFU << USART_BRR_DIV_Mantissa_Pos) /*!< 0x0000FFF0 */ -#define USART_BRR_DIV_Mantissa USART_BRR_DIV_Mantissa_Msk /*!< Mantissa of USARTDIV */ - -/****************** Bit definition for USART_CR1 register *******************/ -#define USART_CR1_SBK_Pos (0U) -#define USART_CR1_SBK_Msk (0x1U << USART_CR1_SBK_Pos) /*!< 0x00000001 */ -#define USART_CR1_SBK USART_CR1_SBK_Msk /*!< Send Break */ -#define USART_CR1_RWU_Pos (1U) -#define USART_CR1_RWU_Msk (0x1U << USART_CR1_RWU_Pos) /*!< 0x00000002 */ -#define USART_CR1_RWU USART_CR1_RWU_Msk /*!< Receiver wakeup */ -#define USART_CR1_RE_Pos (2U) -#define USART_CR1_RE_Msk (0x1U << USART_CR1_RE_Pos) /*!< 0x00000004 */ -#define USART_CR1_RE USART_CR1_RE_Msk /*!< Receiver Enable */ -#define USART_CR1_TE_Pos (3U) -#define USART_CR1_TE_Msk (0x1U << USART_CR1_TE_Pos) /*!< 0x00000008 */ -#define USART_CR1_TE USART_CR1_TE_Msk /*!< Transmitter Enable */ -#define USART_CR1_IDLEIE_Pos (4U) -#define USART_CR1_IDLEIE_Msk (0x1U << USART_CR1_IDLEIE_Pos) /*!< 0x00000010 */ -#define USART_CR1_IDLEIE USART_CR1_IDLEIE_Msk /*!< IDLE Interrupt Enable */ -#define USART_CR1_RXNEIE_Pos (5U) -#define USART_CR1_RXNEIE_Msk (0x1U << USART_CR1_RXNEIE_Pos) /*!< 0x00000020 */ -#define USART_CR1_RXNEIE USART_CR1_RXNEIE_Msk /*!< RXNE Interrupt Enable */ -#define USART_CR1_TCIE_Pos (6U) -#define USART_CR1_TCIE_Msk (0x1U << USART_CR1_TCIE_Pos) /*!< 0x00000040 */ -#define USART_CR1_TCIE USART_CR1_TCIE_Msk /*!< Transmission Complete Interrupt Enable */ -#define USART_CR1_TXEIE_Pos (7U) -#define USART_CR1_TXEIE_Msk (0x1U << USART_CR1_TXEIE_Pos) /*!< 0x00000080 */ -#define USART_CR1_TXEIE USART_CR1_TXEIE_Msk /*!< PE Interrupt Enable */ -#define USART_CR1_PEIE_Pos (8U) -#define USART_CR1_PEIE_Msk (0x1U << USART_CR1_PEIE_Pos) /*!< 0x00000100 */ -#define USART_CR1_PEIE USART_CR1_PEIE_Msk /*!< PE Interrupt Enable */ -#define USART_CR1_PS_Pos (9U) -#define USART_CR1_PS_Msk (0x1U << USART_CR1_PS_Pos) /*!< 0x00000200 */ -#define USART_CR1_PS USART_CR1_PS_Msk /*!< Parity Selection */ -#define USART_CR1_PCE_Pos (10U) -#define USART_CR1_PCE_Msk (0x1U << USART_CR1_PCE_Pos) /*!< 0x00000400 */ -#define USART_CR1_PCE USART_CR1_PCE_Msk /*!< Parity Control Enable */ -#define USART_CR1_WAKE_Pos (11U) -#define USART_CR1_WAKE_Msk (0x1U << USART_CR1_WAKE_Pos) /*!< 0x00000800 */ -#define USART_CR1_WAKE USART_CR1_WAKE_Msk /*!< Wakeup method */ -#define USART_CR1_M_Pos (12U) -#define USART_CR1_M_Msk (0x1U << USART_CR1_M_Pos) /*!< 0x00001000 */ -#define USART_CR1_M USART_CR1_M_Msk /*!< Word length */ -#define USART_CR1_UE_Pos (13U) -#define USART_CR1_UE_Msk (0x1U << USART_CR1_UE_Pos) /*!< 0x00002000 */ -#define USART_CR1_UE USART_CR1_UE_Msk /*!< USART Enable */ - -/****************** Bit definition for USART_CR2 register *******************/ -#define USART_CR2_ADD_Pos (0U) -#define USART_CR2_ADD_Msk (0xFU << USART_CR2_ADD_Pos) /*!< 0x0000000F */ -#define USART_CR2_ADD USART_CR2_ADD_Msk /*!< Address of the USART node */ -#define USART_CR2_LBDL_Pos (5U) -#define USART_CR2_LBDL_Msk (0x1U << USART_CR2_LBDL_Pos) /*!< 0x00000020 */ -#define USART_CR2_LBDL USART_CR2_LBDL_Msk /*!< LIN Break Detection Length */ -#define USART_CR2_LBDIE_Pos (6U) -#define USART_CR2_LBDIE_Msk (0x1U << USART_CR2_LBDIE_Pos) /*!< 0x00000040 */ -#define USART_CR2_LBDIE USART_CR2_LBDIE_Msk /*!< LIN Break Detection Interrupt Enable */ -#define USART_CR2_LBCL_Pos (8U) -#define USART_CR2_LBCL_Msk (0x1U << USART_CR2_LBCL_Pos) /*!< 0x00000100 */ -#define USART_CR2_LBCL USART_CR2_LBCL_Msk /*!< Last Bit Clock pulse */ -#define USART_CR2_CPHA_Pos (9U) -#define USART_CR2_CPHA_Msk (0x1U << USART_CR2_CPHA_Pos) /*!< 0x00000200 */ -#define USART_CR2_CPHA USART_CR2_CPHA_Msk /*!< Clock Phase */ -#define USART_CR2_CPOL_Pos (10U) -#define USART_CR2_CPOL_Msk (0x1U << USART_CR2_CPOL_Pos) /*!< 0x00000400 */ -#define USART_CR2_CPOL USART_CR2_CPOL_Msk /*!< Clock Polarity */ -#define USART_CR2_CLKEN_Pos (11U) -#define USART_CR2_CLKEN_Msk (0x1U << USART_CR2_CLKEN_Pos) /*!< 0x00000800 */ -#define USART_CR2_CLKEN USART_CR2_CLKEN_Msk /*!< Clock Enable */ - -#define USART_CR2_STOP_Pos (12U) -#define USART_CR2_STOP_Msk (0x3U << USART_CR2_STOP_Pos) /*!< 0x00003000 */ -#define USART_CR2_STOP USART_CR2_STOP_Msk /*!< STOP[1:0] bits (STOP bits) */ -#define USART_CR2_STOP_0 (0x1U << USART_CR2_STOP_Pos) /*!< 0x00001000 */ -#define USART_CR2_STOP_1 (0x2U << USART_CR2_STOP_Pos) /*!< 0x00002000 */ - -#define USART_CR2_LINEN_Pos (14U) -#define USART_CR2_LINEN_Msk (0x1U << USART_CR2_LINEN_Pos) /*!< 0x00004000 */ -#define USART_CR2_LINEN USART_CR2_LINEN_Msk /*!< LIN mode enable */ - -/****************** Bit definition for USART_CR3 register *******************/ -#define USART_CR3_EIE_Pos (0U) -#define USART_CR3_EIE_Msk (0x1U << USART_CR3_EIE_Pos) /*!< 0x00000001 */ -#define USART_CR3_EIE USART_CR3_EIE_Msk /*!< Error Interrupt Enable */ -#define USART_CR3_IREN_Pos (1U) -#define USART_CR3_IREN_Msk (0x1U << USART_CR3_IREN_Pos) /*!< 0x00000002 */ -#define USART_CR3_IREN USART_CR3_IREN_Msk /*!< IrDA mode Enable */ -#define USART_CR3_IRLP_Pos (2U) -#define USART_CR3_IRLP_Msk (0x1U << USART_CR3_IRLP_Pos) /*!< 0x00000004 */ -#define USART_CR3_IRLP USART_CR3_IRLP_Msk /*!< IrDA Low-Power */ -#define USART_CR3_HDSEL_Pos (3U) -#define USART_CR3_HDSEL_Msk (0x1U << USART_CR3_HDSEL_Pos) /*!< 0x00000008 */ -#define USART_CR3_HDSEL USART_CR3_HDSEL_Msk /*!< Half-Duplex Selection */ -#define USART_CR3_NACK_Pos (4U) -#define USART_CR3_NACK_Msk (0x1U << USART_CR3_NACK_Pos) /*!< 0x00000010 */ -#define USART_CR3_NACK USART_CR3_NACK_Msk /*!< Smartcard NACK enable */ -#define USART_CR3_SCEN_Pos (5U) -#define USART_CR3_SCEN_Msk (0x1U << USART_CR3_SCEN_Pos) /*!< 0x00000020 */ -#define USART_CR3_SCEN USART_CR3_SCEN_Msk /*!< Smartcard mode enable */ -#define USART_CR3_DMAR_Pos (6U) -#define USART_CR3_DMAR_Msk (0x1U << USART_CR3_DMAR_Pos) /*!< 0x00000040 */ -#define USART_CR3_DMAR USART_CR3_DMAR_Msk /*!< DMA Enable Receiver */ -#define USART_CR3_DMAT_Pos (7U) -#define USART_CR3_DMAT_Msk (0x1U << USART_CR3_DMAT_Pos) /*!< 0x00000080 */ -#define USART_CR3_DMAT USART_CR3_DMAT_Msk /*!< DMA Enable Transmitter */ -#define USART_CR3_RTSE_Pos (8U) -#define USART_CR3_RTSE_Msk (0x1U << USART_CR3_RTSE_Pos) /*!< 0x00000100 */ -#define USART_CR3_RTSE USART_CR3_RTSE_Msk /*!< RTS Enable */ -#define USART_CR3_CTSE_Pos (9U) -#define USART_CR3_CTSE_Msk (0x1U << USART_CR3_CTSE_Pos) /*!< 0x00000200 */ -#define USART_CR3_CTSE USART_CR3_CTSE_Msk /*!< CTS Enable */ -#define USART_CR3_CTSIE_Pos (10U) -#define USART_CR3_CTSIE_Msk (0x1U << USART_CR3_CTSIE_Pos) /*!< 0x00000400 */ -#define USART_CR3_CTSIE USART_CR3_CTSIE_Msk /*!< CTS Interrupt Enable */ - -/****************** Bit definition for USART_GTPR register ******************/ -#define USART_GTPR_PSC_Pos (0U) -#define USART_GTPR_PSC_Msk (0xFFU << USART_GTPR_PSC_Pos) /*!< 0x000000FF */ -#define USART_GTPR_PSC USART_GTPR_PSC_Msk /*!< PSC[7:0] bits (Prescaler value) */ -#define USART_GTPR_PSC_0 (0x01U << USART_GTPR_PSC_Pos) /*!< 0x00000001 */ -#define USART_GTPR_PSC_1 (0x02U << USART_GTPR_PSC_Pos) /*!< 0x00000002 */ -#define USART_GTPR_PSC_2 (0x04U << USART_GTPR_PSC_Pos) /*!< 0x00000004 */ -#define USART_GTPR_PSC_3 (0x08U << USART_GTPR_PSC_Pos) /*!< 0x00000008 */ -#define USART_GTPR_PSC_4 (0x10U << USART_GTPR_PSC_Pos) /*!< 0x00000010 */ -#define USART_GTPR_PSC_5 (0x20U << USART_GTPR_PSC_Pos) /*!< 0x00000020 */ -#define USART_GTPR_PSC_6 (0x40U << USART_GTPR_PSC_Pos) /*!< 0x00000040 */ -#define USART_GTPR_PSC_7 (0x80U << USART_GTPR_PSC_Pos) /*!< 0x00000080 */ - -#define USART_GTPR_GT_Pos (8U) -#define USART_GTPR_GT_Msk (0xFFU << USART_GTPR_GT_Pos) /*!< 0x0000FF00 */ -#define USART_GTPR_GT USART_GTPR_GT_Msk /*!< Guard time value */ - -/******************************************************************************/ -/* */ -/* Debug MCU */ -/* */ -/******************************************************************************/ - -/**************** Bit definition for DBGMCU_IDCODE register *****************/ -#define DBGMCU_IDCODE_DEV_ID_Pos (0U) -#define DBGMCU_IDCODE_DEV_ID_Msk (0xFFFU << DBGMCU_IDCODE_DEV_ID_Pos) /*!< 0x00000FFF */ -#define DBGMCU_IDCODE_DEV_ID DBGMCU_IDCODE_DEV_ID_Msk /*!< Device Identifier */ - -#define DBGMCU_IDCODE_REV_ID_Pos (16U) -#define DBGMCU_IDCODE_REV_ID_Msk (0xFFFFU << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0xFFFF0000 */ -#define DBGMCU_IDCODE_REV_ID DBGMCU_IDCODE_REV_ID_Msk /*!< REV_ID[15:0] bits (Revision Identifier) */ -#define DBGMCU_IDCODE_REV_ID_0 (0x0001U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00010000 */ -#define DBGMCU_IDCODE_REV_ID_1 (0x0002U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00020000 */ -#define DBGMCU_IDCODE_REV_ID_2 (0x0004U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00040000 */ -#define DBGMCU_IDCODE_REV_ID_3 (0x0008U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00080000 */ -#define DBGMCU_IDCODE_REV_ID_4 (0x0010U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00100000 */ -#define DBGMCU_IDCODE_REV_ID_5 (0x0020U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00200000 */ -#define DBGMCU_IDCODE_REV_ID_6 (0x0040U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00400000 */ -#define DBGMCU_IDCODE_REV_ID_7 (0x0080U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x00800000 */ -#define DBGMCU_IDCODE_REV_ID_8 (0x0100U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x01000000 */ -#define DBGMCU_IDCODE_REV_ID_9 (0x0200U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x02000000 */ -#define DBGMCU_IDCODE_REV_ID_10 (0x0400U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x04000000 */ -#define DBGMCU_IDCODE_REV_ID_11 (0x0800U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x08000000 */ -#define DBGMCU_IDCODE_REV_ID_12 (0x1000U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x10000000 */ -#define DBGMCU_IDCODE_REV_ID_13 (0x2000U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x20000000 */ -#define DBGMCU_IDCODE_REV_ID_14 (0x4000U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x40000000 */ -#define DBGMCU_IDCODE_REV_ID_15 (0x8000U << DBGMCU_IDCODE_REV_ID_Pos) /*!< 0x80000000 */ - -/****************** Bit definition for DBGMCU_CR register *******************/ -#define DBGMCU_CR_DBG_SLEEP_Pos (0U) -#define DBGMCU_CR_DBG_SLEEP_Msk (0x1U << DBGMCU_CR_DBG_SLEEP_Pos) /*!< 0x00000001 */ -#define DBGMCU_CR_DBG_SLEEP DBGMCU_CR_DBG_SLEEP_Msk /*!< Debug Sleep Mode */ -#define DBGMCU_CR_DBG_STOP_Pos (1U) -#define DBGMCU_CR_DBG_STOP_Msk (0x1U << DBGMCU_CR_DBG_STOP_Pos) /*!< 0x00000002 */ -#define DBGMCU_CR_DBG_STOP DBGMCU_CR_DBG_STOP_Msk /*!< Debug Stop Mode */ -#define DBGMCU_CR_DBG_STANDBY_Pos (2U) -#define DBGMCU_CR_DBG_STANDBY_Msk (0x1U << DBGMCU_CR_DBG_STANDBY_Pos) /*!< 0x00000004 */ -#define DBGMCU_CR_DBG_STANDBY DBGMCU_CR_DBG_STANDBY_Msk /*!< Debug Standby mode */ -#define DBGMCU_CR_TRACE_IOEN_Pos (5U) -#define DBGMCU_CR_TRACE_IOEN_Msk (0x1U << DBGMCU_CR_TRACE_IOEN_Pos) /*!< 0x00000020 */ -#define DBGMCU_CR_TRACE_IOEN DBGMCU_CR_TRACE_IOEN_Msk /*!< Trace Pin Assignment Control */ - -#define DBGMCU_CR_TRACE_MODE_Pos (6U) -#define DBGMCU_CR_TRACE_MODE_Msk (0x3U << DBGMCU_CR_TRACE_MODE_Pos) /*!< 0x000000C0 */ -#define DBGMCU_CR_TRACE_MODE DBGMCU_CR_TRACE_MODE_Msk /*!< TRACE_MODE[1:0] bits (Trace Pin Assignment Control) */ -#define DBGMCU_CR_TRACE_MODE_0 (0x1U << DBGMCU_CR_TRACE_MODE_Pos) /*!< 0x00000040 */ -#define DBGMCU_CR_TRACE_MODE_1 (0x2U << DBGMCU_CR_TRACE_MODE_Pos) /*!< 0x00000080 */ - -#define DBGMCU_CR_DBG_IWDG_STOP_Pos (8U) -#define DBGMCU_CR_DBG_IWDG_STOP_Msk (0x1U << DBGMCU_CR_DBG_IWDG_STOP_Pos) /*!< 0x00000100 */ -#define DBGMCU_CR_DBG_IWDG_STOP DBGMCU_CR_DBG_IWDG_STOP_Msk /*!< Debug Independent Watchdog stopped when Core is halted */ -#define DBGMCU_CR_DBG_WWDG_STOP_Pos (9U) -#define DBGMCU_CR_DBG_WWDG_STOP_Msk (0x1U << DBGMCU_CR_DBG_WWDG_STOP_Pos) /*!< 0x00000200 */ -#define DBGMCU_CR_DBG_WWDG_STOP DBGMCU_CR_DBG_WWDG_STOP_Msk /*!< Debug Window Watchdog stopped when Core is halted */ -#define DBGMCU_CR_DBG_TIM1_STOP_Pos (10U) -#define DBGMCU_CR_DBG_TIM1_STOP_Msk (0x1U << DBGMCU_CR_DBG_TIM1_STOP_Pos) /*!< 0x00000400 */ -#define DBGMCU_CR_DBG_TIM1_STOP DBGMCU_CR_DBG_TIM1_STOP_Msk /*!< TIM1 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_TIM2_STOP_Pos (11U) -#define DBGMCU_CR_DBG_TIM2_STOP_Msk (0x1U << DBGMCU_CR_DBG_TIM2_STOP_Pos) /*!< 0x00000800 */ -#define DBGMCU_CR_DBG_TIM2_STOP DBGMCU_CR_DBG_TIM2_STOP_Msk /*!< TIM2 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_TIM3_STOP_Pos (12U) -#define DBGMCU_CR_DBG_TIM3_STOP_Msk (0x1U << DBGMCU_CR_DBG_TIM3_STOP_Pos) /*!< 0x00001000 */ -#define DBGMCU_CR_DBG_TIM3_STOP DBGMCU_CR_DBG_TIM3_STOP_Msk /*!< TIM3 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_CAN1_STOP_Pos (14U) -#define DBGMCU_CR_DBG_CAN1_STOP_Msk (0x1U << DBGMCU_CR_DBG_CAN1_STOP_Pos) /*!< 0x00004000 */ -#define DBGMCU_CR_DBG_CAN1_STOP DBGMCU_CR_DBG_CAN1_STOP_Msk /*!< Debug CAN1 stopped when Core is halted */ -#define DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT_Pos (15U) -#define DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT_Msk (0x1U << DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT_Pos) /*!< 0x00008000 */ -#define DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT_Msk /*!< SMBUS timeout mode stopped when Core is halted */ - -/******************************************************************************/ -/* */ -/* FLASH and Option Bytes Registers */ -/* */ -/******************************************************************************/ -/******************* Bit definition for FLASH_ACR register ******************/ -#define FLASH_ACR_LATENCY_Pos (0U) -#define FLASH_ACR_LATENCY_Msk (0x7U << FLASH_ACR_LATENCY_Pos) /*!< 0x00000007 */ -#define FLASH_ACR_LATENCY FLASH_ACR_LATENCY_Msk /*!< LATENCY[2:0] bits (Latency) */ -#define FLASH_ACR_LATENCY_0 (0x1U << FLASH_ACR_LATENCY_Pos) /*!< 0x00000001 */ -#define FLASH_ACR_LATENCY_1 (0x2U << FLASH_ACR_LATENCY_Pos) /*!< 0x00000002 */ -#define FLASH_ACR_LATENCY_2 (0x4U << FLASH_ACR_LATENCY_Pos) /*!< 0x00000004 */ - -#define FLASH_ACR_HLFCYA_Pos (3U) -#define FLASH_ACR_HLFCYA_Msk (0x1U << FLASH_ACR_HLFCYA_Pos) /*!< 0x00000008 */ -#define FLASH_ACR_HLFCYA FLASH_ACR_HLFCYA_Msk /*!< Flash Half Cycle Access Enable */ -#define FLASH_ACR_PRFTBE_Pos (4U) -#define FLASH_ACR_PRFTBE_Msk (0x1U << FLASH_ACR_PRFTBE_Pos) /*!< 0x00000010 */ -#define FLASH_ACR_PRFTBE FLASH_ACR_PRFTBE_Msk /*!< Prefetch Buffer Enable */ -#define FLASH_ACR_PRFTBS_Pos (5U) -#define FLASH_ACR_PRFTBS_Msk (0x1U << FLASH_ACR_PRFTBS_Pos) /*!< 0x00000020 */ -#define FLASH_ACR_PRFTBS FLASH_ACR_PRFTBS_Msk /*!< Prefetch Buffer Status */ - -/****************** Bit definition for FLASH_KEYR register ******************/ -#define FLASH_KEYR_FKEYR_Pos (0U) -#define FLASH_KEYR_FKEYR_Msk (0xFFFFFFFFU << FLASH_KEYR_FKEYR_Pos) /*!< 0xFFFFFFFF */ -#define FLASH_KEYR_FKEYR FLASH_KEYR_FKEYR_Msk /*!< FPEC Key */ - -#define RDP_KEY_Pos (0U) -#define RDP_KEY_Msk (0xA5U << RDP_KEY_Pos) /*!< 0x000000A5 */ -#define RDP_KEY RDP_KEY_Msk /*!< RDP Key */ -#define FLASH_KEY1_Pos (0U) -#define FLASH_KEY1_Msk (0x45670123U << FLASH_KEY1_Pos) /*!< 0x45670123 */ -#define FLASH_KEY1 FLASH_KEY1_Msk /*!< FPEC Key1 */ -#define FLASH_KEY2_Pos (0U) -#define FLASH_KEY2_Msk (0xCDEF89ABU << FLASH_KEY2_Pos) /*!< 0xCDEF89AB */ -#define FLASH_KEY2 FLASH_KEY2_Msk /*!< FPEC Key2 */ - -/***************** Bit definition for FLASH_OPTKEYR register ****************/ -#define FLASH_OPTKEYR_OPTKEYR_Pos (0U) -#define FLASH_OPTKEYR_OPTKEYR_Msk (0xFFFFFFFFU << FLASH_OPTKEYR_OPTKEYR_Pos) /*!< 0xFFFFFFFF */ -#define FLASH_OPTKEYR_OPTKEYR FLASH_OPTKEYR_OPTKEYR_Msk /*!< Option Byte Key */ - -#define FLASH_OPTKEY1 FLASH_KEY1 /*!< Option Byte Key1 */ -#define FLASH_OPTKEY2 FLASH_KEY2 /*!< Option Byte Key2 */ - -/****************** Bit definition for FLASH_SR register ********************/ -#define FLASH_SR_BSY_Pos (0U) -#define FLASH_SR_BSY_Msk (0x1U << FLASH_SR_BSY_Pos) /*!< 0x00000001 */ -#define FLASH_SR_BSY FLASH_SR_BSY_Msk /*!< Busy */ -#define FLASH_SR_PGERR_Pos (2U) -#define FLASH_SR_PGERR_Msk (0x1U << FLASH_SR_PGERR_Pos) /*!< 0x00000004 */ -#define FLASH_SR_PGERR FLASH_SR_PGERR_Msk /*!< Programming Error */ -#define FLASH_SR_WRPRTERR_Pos (4U) -#define FLASH_SR_WRPRTERR_Msk (0x1U << FLASH_SR_WRPRTERR_Pos) /*!< 0x00000010 */ -#define FLASH_SR_WRPRTERR FLASH_SR_WRPRTERR_Msk /*!< Write Protection Error */ -#define FLASH_SR_EOP_Pos (5U) -#define FLASH_SR_EOP_Msk (0x1U << FLASH_SR_EOP_Pos) /*!< 0x00000020 */ -#define FLASH_SR_EOP FLASH_SR_EOP_Msk /*!< End of operation */ - -/******************* Bit definition for FLASH_CR register *******************/ -#define FLASH_CR_PG_Pos (0U) -#define FLASH_CR_PG_Msk (0x1U << FLASH_CR_PG_Pos) /*!< 0x00000001 */ -#define FLASH_CR_PG FLASH_CR_PG_Msk /*!< Programming */ -#define FLASH_CR_PER_Pos (1U) -#define FLASH_CR_PER_Msk (0x1U << FLASH_CR_PER_Pos) /*!< 0x00000002 */ -#define FLASH_CR_PER FLASH_CR_PER_Msk /*!< Page Erase */ -#define FLASH_CR_MER_Pos (2U) -#define FLASH_CR_MER_Msk (0x1U << FLASH_CR_MER_Pos) /*!< 0x00000004 */ -#define FLASH_CR_MER FLASH_CR_MER_Msk /*!< Mass Erase */ -#define FLASH_CR_OPTPG_Pos (4U) -#define FLASH_CR_OPTPG_Msk (0x1U << FLASH_CR_OPTPG_Pos) /*!< 0x00000010 */ -#define FLASH_CR_OPTPG FLASH_CR_OPTPG_Msk /*!< Option Byte Programming */ -#define FLASH_CR_OPTER_Pos (5U) -#define FLASH_CR_OPTER_Msk (0x1U << FLASH_CR_OPTER_Pos) /*!< 0x00000020 */ -#define FLASH_CR_OPTER FLASH_CR_OPTER_Msk /*!< Option Byte Erase */ -#define FLASH_CR_STRT_Pos (6U) -#define FLASH_CR_STRT_Msk (0x1U << FLASH_CR_STRT_Pos) /*!< 0x00000040 */ -#define FLASH_CR_STRT FLASH_CR_STRT_Msk /*!< Start */ -#define FLASH_CR_LOCK_Pos (7U) -#define FLASH_CR_LOCK_Msk (0x1U << FLASH_CR_LOCK_Pos) /*!< 0x00000080 */ -#define FLASH_CR_LOCK FLASH_CR_LOCK_Msk /*!< Lock */ -#define FLASH_CR_OPTWRE_Pos (9U) -#define FLASH_CR_OPTWRE_Msk (0x1U << FLASH_CR_OPTWRE_Pos) /*!< 0x00000200 */ -#define FLASH_CR_OPTWRE FLASH_CR_OPTWRE_Msk /*!< Option Bytes Write Enable */ -#define FLASH_CR_ERRIE_Pos (10U) -#define FLASH_CR_ERRIE_Msk (0x1U << FLASH_CR_ERRIE_Pos) /*!< 0x00000400 */ -#define FLASH_CR_ERRIE FLASH_CR_ERRIE_Msk /*!< Error Interrupt Enable */ -#define FLASH_CR_EOPIE_Pos (12U) -#define FLASH_CR_EOPIE_Msk (0x1U << FLASH_CR_EOPIE_Pos) /*!< 0x00001000 */ -#define FLASH_CR_EOPIE FLASH_CR_EOPIE_Msk /*!< End of operation interrupt enable */ - -/******************* Bit definition for FLASH_AR register *******************/ -#define FLASH_AR_FAR_Pos (0U) -#define FLASH_AR_FAR_Msk (0xFFFFFFFFU << FLASH_AR_FAR_Pos) /*!< 0xFFFFFFFF */ -#define FLASH_AR_FAR FLASH_AR_FAR_Msk /*!< Flash Address */ - -/****************** Bit definition for FLASH_OBR register *******************/ -#define FLASH_OBR_OPTERR_Pos (0U) -#define FLASH_OBR_OPTERR_Msk (0x1U << FLASH_OBR_OPTERR_Pos) /*!< 0x00000001 */ -#define FLASH_OBR_OPTERR FLASH_OBR_OPTERR_Msk /*!< Option Byte Error */ -#define FLASH_OBR_RDPRT_Pos (1U) -#define FLASH_OBR_RDPRT_Msk (0x1U << FLASH_OBR_RDPRT_Pos) /*!< 0x00000002 */ -#define FLASH_OBR_RDPRT FLASH_OBR_RDPRT_Msk /*!< Read protection */ - -#define FLASH_OBR_IWDG_SW_Pos (2U) -#define FLASH_OBR_IWDG_SW_Msk (0x1U << FLASH_OBR_IWDG_SW_Pos) /*!< 0x00000004 */ -#define FLASH_OBR_IWDG_SW FLASH_OBR_IWDG_SW_Msk /*!< IWDG SW */ -#define FLASH_OBR_nRST_STOP_Pos (3U) -#define FLASH_OBR_nRST_STOP_Msk (0x1U << FLASH_OBR_nRST_STOP_Pos) /*!< 0x00000008 */ -#define FLASH_OBR_nRST_STOP FLASH_OBR_nRST_STOP_Msk /*!< nRST_STOP */ -#define FLASH_OBR_nRST_STDBY_Pos (4U) -#define FLASH_OBR_nRST_STDBY_Msk (0x1U << FLASH_OBR_nRST_STDBY_Pos) /*!< 0x00000010 */ -#define FLASH_OBR_nRST_STDBY FLASH_OBR_nRST_STDBY_Msk /*!< nRST_STDBY */ -#define FLASH_OBR_USER_Pos (2U) -#define FLASH_OBR_USER_Msk (0x7U << FLASH_OBR_USER_Pos) /*!< 0x0000001C */ -#define FLASH_OBR_USER FLASH_OBR_USER_Msk /*!< User Option Bytes */ -#define FLASH_OBR_DATA0_Pos (10U) -#define FLASH_OBR_DATA0_Msk (0xFFU << FLASH_OBR_DATA0_Pos) /*!< 0x0003FC00 */ -#define FLASH_OBR_DATA0 FLASH_OBR_DATA0_Msk /*!< Data0 */ -#define FLASH_OBR_DATA1_Pos (18U) -#define FLASH_OBR_DATA1_Msk (0xFFU << FLASH_OBR_DATA1_Pos) /*!< 0x03FC0000 */ -#define FLASH_OBR_DATA1 FLASH_OBR_DATA1_Msk /*!< Data1 */ - -/****************** Bit definition for FLASH_WRPR register ******************/ -#define FLASH_WRPR_WRP_Pos (0U) -#define FLASH_WRPR_WRP_Msk (0xFFFFFFFFU << FLASH_WRPR_WRP_Pos) /*!< 0xFFFFFFFF */ -#define FLASH_WRPR_WRP FLASH_WRPR_WRP_Msk /*!< Write Protect */ - -/*----------------------------------------------------------------------------*/ - -/****************** Bit definition for FLASH_RDP register *******************/ -#define FLASH_RDP_RDP_Pos (0U) -#define FLASH_RDP_RDP_Msk (0xFFU << FLASH_RDP_RDP_Pos) /*!< 0x000000FF */ -#define FLASH_RDP_RDP FLASH_RDP_RDP_Msk /*!< Read protection option byte */ -#define FLASH_RDP_nRDP_Pos (8U) -#define FLASH_RDP_nRDP_Msk (0xFFU << FLASH_RDP_nRDP_Pos) /*!< 0x0000FF00 */ -#define FLASH_RDP_nRDP FLASH_RDP_nRDP_Msk /*!< Read protection complemented option byte */ - -/****************** Bit definition for FLASH_USER register ******************/ -#define FLASH_USER_USER_Pos (16U) -#define FLASH_USER_USER_Msk (0xFFU << FLASH_USER_USER_Pos) /*!< 0x00FF0000 */ -#define FLASH_USER_USER FLASH_USER_USER_Msk /*!< User option byte */ -#define FLASH_USER_nUSER_Pos (24U) -#define FLASH_USER_nUSER_Msk (0xFFU << FLASH_USER_nUSER_Pos) /*!< 0xFF000000 */ -#define FLASH_USER_nUSER FLASH_USER_nUSER_Msk /*!< User complemented option byte */ - -/****************** Bit definition for FLASH_Data0 register *****************/ -#define FLASH_DATA0_DATA0_Pos (0U) -#define FLASH_DATA0_DATA0_Msk (0xFFU << FLASH_DATA0_DATA0_Pos) /*!< 0x000000FF */ -#define FLASH_DATA0_DATA0 FLASH_DATA0_DATA0_Msk /*!< User data storage option byte */ -#define FLASH_DATA0_nDATA0_Pos (8U) -#define FLASH_DATA0_nDATA0_Msk (0xFFU << FLASH_DATA0_nDATA0_Pos) /*!< 0x0000FF00 */ -#define FLASH_DATA0_nDATA0 FLASH_DATA0_nDATA0_Msk /*!< User data storage complemented option byte */ - -/****************** Bit definition for FLASH_Data1 register *****************/ -#define FLASH_DATA1_DATA1_Pos (16U) -#define FLASH_DATA1_DATA1_Msk (0xFFU << FLASH_DATA1_DATA1_Pos) /*!< 0x00FF0000 */ -#define FLASH_DATA1_DATA1 FLASH_DATA1_DATA1_Msk /*!< User data storage option byte */ -#define FLASH_DATA1_nDATA1_Pos (24U) -#define FLASH_DATA1_nDATA1_Msk (0xFFU << FLASH_DATA1_nDATA1_Pos) /*!< 0xFF000000 */ -#define FLASH_DATA1_nDATA1 FLASH_DATA1_nDATA1_Msk /*!< User data storage complemented option byte */ - -/****************** Bit definition for FLASH_WRP0 register ******************/ -#define FLASH_WRP0_WRP0_Pos (0U) -#define FLASH_WRP0_WRP0_Msk (0xFFU << FLASH_WRP0_WRP0_Pos) /*!< 0x000000FF */ -#define FLASH_WRP0_WRP0 FLASH_WRP0_WRP0_Msk /*!< Flash memory write protection option bytes */ -#define FLASH_WRP0_nWRP0_Pos (8U) -#define FLASH_WRP0_nWRP0_Msk (0xFFU << FLASH_WRP0_nWRP0_Pos) /*!< 0x0000FF00 */ -#define FLASH_WRP0_nWRP0 FLASH_WRP0_nWRP0_Msk /*!< Flash memory write protection complemented option bytes */ - - - -/** - * @} -*/ - -/** - * @} -*/ - -/** @addtogroup Exported_macro - * @{ - */ - -/****************************** ADC Instances *********************************/ -#define IS_ADC_ALL_INSTANCE(INSTANCE) (((INSTANCE) == ADC1) || \ - ((INSTANCE) == ADC2)) - -#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC12_COMMON) - -#define IS_ADC_MULTIMODE_MASTER_INSTANCE(INSTANCE) ((INSTANCE) == ADC1) - -#define IS_ADC_DMA_CAPABILITY_INSTANCE(INSTANCE) ((INSTANCE) == ADC1) - -/****************************** CAN Instances *********************************/ -#define IS_CAN_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CAN1) - -/****************************** CRC Instances *********************************/ -#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC) - -/****************************** DAC Instances *********************************/ - -/****************************** DMA Instances *********************************/ -#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \ - ((INSTANCE) == DMA1_Channel2) || \ - ((INSTANCE) == DMA1_Channel3) || \ - ((INSTANCE) == DMA1_Channel4) || \ - ((INSTANCE) == DMA1_Channel5) || \ - ((INSTANCE) == DMA1_Channel6) || \ - ((INSTANCE) == DMA1_Channel7)) - -/******************************* GPIO Instances *******************************/ -#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \ - ((INSTANCE) == GPIOB) || \ - ((INSTANCE) == GPIOC) || \ - ((INSTANCE) == GPIOD)) - -/**************************** GPIO Alternate Function Instances ***************/ -#define IS_GPIO_AF_INSTANCE(INSTANCE) IS_GPIO_ALL_INSTANCE(INSTANCE) - -/**************************** GPIO Lock Instances *****************************/ -#define IS_GPIO_LOCK_INSTANCE(INSTANCE) IS_GPIO_ALL_INSTANCE(INSTANCE) - -/******************************** I2C Instances *******************************/ -#define IS_I2C_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1) - -/****************************** IWDG Instances ********************************/ -#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG) - -/******************************** SPI Instances *******************************/ -#define IS_SPI_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SPI1) - -/****************************** START TIM Instances ***************************/ -/****************************** TIM Instances *********************************/ -#define IS_TIM_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_CC1_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_CC2_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_CC3_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_CC4_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_XOR_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_MASTER_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_BREAK_INSTANCE(INSTANCE)\ - ((INSTANCE) == TIM1) - -#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \ - ((((INSTANCE) == TIM1) && \ - (((CHANNEL) == TIM_CHANNEL_1) || \ - ((CHANNEL) == TIM_CHANNEL_2) || \ - ((CHANNEL) == TIM_CHANNEL_3) || \ - ((CHANNEL) == TIM_CHANNEL_4))) \ - || \ - (((INSTANCE) == TIM2) && \ - (((CHANNEL) == TIM_CHANNEL_1) || \ - ((CHANNEL) == TIM_CHANNEL_2) || \ - ((CHANNEL) == TIM_CHANNEL_3) || \ - ((CHANNEL) == TIM_CHANNEL_4))) \ - || \ - (((INSTANCE) == TIM3) && \ - (((CHANNEL) == TIM_CHANNEL_1) || \ - ((CHANNEL) == TIM_CHANNEL_2) || \ - ((CHANNEL) == TIM_CHANNEL_3) || \ - ((CHANNEL) == TIM_CHANNEL_4)))) - -#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \ - (((INSTANCE) == TIM1) && \ - (((CHANNEL) == TIM_CHANNEL_1) || \ - ((CHANNEL) == TIM_CHANNEL_2) || \ - ((CHANNEL) == TIM_CHANNEL_3))) - -#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\ - ((INSTANCE) == TIM1) - -#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_DMA_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\ - (((INSTANCE) == TIM1) || \ - ((INSTANCE) == TIM2) || \ - ((INSTANCE) == TIM3)) - -#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\ - ((INSTANCE) == TIM1) - -/****************************** END TIM Instances *****************************/ - - -/******************** USART Instances : Synchronous mode **********************/ -#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2)) - -/******************** UART Instances : Asynchronous mode **********************/ -#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2) ) - -/******************** UART Instances : Half-Duplex mode **********************/ -#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2) ) - -/******************** UART Instances : LIN mode **********************/ -#define IS_UART_LIN_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2) ) - -/****************** UART Instances : Hardware Flow control ********************/ -#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2) ) - -/********************* UART Instances : Smard card mode ***********************/ -#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2) ) - -/*********************** UART Instances : IRDA mode ***************************/ -#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2) ) - -/***************** UART Instances : Multi-Processor mode **********************/ -#define IS_UART_MULTIPROCESSOR_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2) ) - -/***************** UART Instances : DMA mode available **********************/ -#define IS_UART_DMA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \ - ((INSTANCE) == USART2) ) - -/****************************** RTC Instances *********************************/ -#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC) - -/**************************** WWDG Instances *****************************/ -#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG) - -/****************************** USB Instances ********************************/ -#define IS_USB_ALL_INSTANCE(INSTANCE) ((INSTANCE) == USB) - - - - -/** - * @} -*/ -/******************************************************************************/ -/* For a painless codes migration between the STM32F1xx device product */ -/* lines, the aliases defined below are put in place to overcome the */ -/* differences in the interrupt handlers and IRQn definitions. */ -/* No need to update developed interrupt code when moving across */ -/* product lines within the same STM32F1 Family */ -/******************************************************************************/ - -/* Aliases for __IRQn */ -#define ADC1_IRQn ADC1_2_IRQn -#define TIM1_BRK_TIM15_IRQn TIM1_BRK_IRQn -#define TIM1_BRK_TIM9_IRQn TIM1_BRK_IRQn -#define TIM9_IRQn TIM1_BRK_IRQn -#define TIM1_TRG_COM_TIM11_IRQn TIM1_TRG_COM_IRQn -#define TIM1_TRG_COM_TIM17_IRQn TIM1_TRG_COM_IRQn -#define TIM11_IRQn TIM1_TRG_COM_IRQn -#define TIM10_IRQn TIM1_UP_IRQn -#define TIM1_UP_TIM16_IRQn TIM1_UP_IRQn -#define TIM1_UP_TIM10_IRQn TIM1_UP_IRQn -#define CEC_IRQn USBWakeUp_IRQn -#define OTG_FS_WKUP_IRQn USBWakeUp_IRQn -#define CAN1_TX_IRQn USB_HP_CAN1_TX_IRQn -#define USB_HP_IRQn USB_HP_CAN1_TX_IRQn -#define USB_LP_IRQn USB_LP_CAN1_RX0_IRQn -#define CAN1_RX0_IRQn USB_LP_CAN1_RX0_IRQn - - -/* Aliases for __IRQHandler */ -#define ADC1_IRQHandler ADC1_2_IRQHandler -#define TIM1_BRK_TIM15_IRQHandler TIM1_BRK_IRQHandler -#define TIM1_BRK_TIM9_IRQHandler TIM1_BRK_IRQHandler -#define TIM9_IRQHandler TIM1_BRK_IRQHandler -#define TIM1_TRG_COM_TIM11_IRQHandler TIM1_TRG_COM_IRQHandler -#define TIM1_TRG_COM_TIM17_IRQHandler TIM1_TRG_COM_IRQHandler -#define TIM11_IRQHandler TIM1_TRG_COM_IRQHandler -#define TIM10_IRQHandler TIM1_UP_IRQHandler -#define TIM1_UP_TIM16_IRQHandler TIM1_UP_IRQHandler -#define TIM1_UP_TIM10_IRQHandler TIM1_UP_IRQHandler -#define CEC_IRQHandler USBWakeUp_IRQHandler -#define OTG_FS_WKUP_IRQHandler USBWakeUp_IRQHandler -#define CAN1_TX_IRQHandler USB_HP_CAN1_TX_IRQHandler -#define USB_HP_IRQHandler USB_HP_CAN1_TX_IRQHandler -#define USB_LP_IRQHandler USB_LP_CAN1_RX0_IRQHandler -#define CAN1_RX0_IRQHandler USB_LP_CAN1_RX0_IRQHandler - - -/** - * @} - */ - -/** - * @} - */ - - -#ifdef __cplusplus - } -#endif /* __cplusplus */ - -#endif /* __STM32F103x6_H */ - - - - /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h b/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h deleted file mode 100644 index 7bd9429..0000000 --- a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h +++ /dev/null @@ -1,238 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx.h - * @author MCD Application Team - * @version V4.1.0 - * @date 29-April-2016 - * @brief CMSIS STM32F1xx Device Peripheral Access Layer Header File. - * - * The file is the unique include file that the application programmer - * is using in the C source code, usually in main.c. This file contains: - * - Configuration section that allows to select: - * - The STM32F1xx device used in the target application - * - To use or not the peripheral’s drivers in application code(i.e. - * code will be based on direct access to peripheral’s registers - * rather than drivers API), this option is controlled by - * "#define USE_HAL_DRIVER" - * - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f1xx - * @{ - */ - -#ifndef __STM32F1XX_H -#define __STM32F1XX_H - -#ifdef __cplusplus - extern "C" { -#endif /* __cplusplus */ - -/** @addtogroup Library_configuration_section - * @{ - */ - -/** - * @brief STM32 Family - */ -#if !defined (STM32F1) -#define STM32F1 -#endif /* STM32F1 */ - -/* Uncomment the line below according to the target STM32L device used in your - application - */ - -#if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \ - !defined (STM32F101xB) && !defined (STM32F101xE) && !defined (STM32F101xG) && !defined (STM32F102x6) && !defined (STM32F102xB) && !defined (STM32F103x6) && \ - !defined (STM32F103xB) && !defined (STM32F103xE) && !defined (STM32F103xG) && !defined (STM32F105xC) && !defined (STM32F107xC) - /* #define STM32F100xB */ /*!< STM32F100C4, STM32F100R4, STM32F100C6, STM32F100R6, STM32F100C8, STM32F100R8, STM32F100V8, STM32F100CB, STM32F100RB and STM32F100VB */ - /* #define STM32F100xE */ /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */ - /* #define STM32F101x6 */ /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */ - /* #define STM32F101xB */ /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */ - /* #define STM32F101xE */ /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */ - /* #define STM32F101xG */ /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */ - /* #define STM32F102x6 */ /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */ - /* #define STM32F102xB */ /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */ - /* #define STM32F103x6 */ /*!< STM32F103C4, STM32F103R4, STM32F103T4, STM32F103C6, STM32F103R6 and STM32F103T6 */ - /* #define STM32F103xB */ /*!< STM32F103C8, STM32F103R8, STM32F103T8, STM32F103V8, STM32F103CB, STM32F103RB, STM32F103TB and STM32F103VB */ - /* #define STM32F103xE */ /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */ - /* #define STM32F103xG */ /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */ - /* #define STM32F105xC */ /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */ - /* #define STM32F107xC */ /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */ -#endif - -/* Tip: To avoid modifying this file each time you need to switch between these - devices, you can define the device in your toolchain compiler preprocessor. - */ - -#if !defined (USE_HAL_DRIVER) -/** - * @brief Comment the line below if you will not use the peripherals drivers. - In this case, these drivers will not be included and the application code will - be based on direct access to peripherals registers - */ - /*#define USE_HAL_DRIVER */ -#endif /* USE_HAL_DRIVER */ - -/** - * @brief CMSIS Device version number - */ -#define __STM32F1_CMSIS_VERSION_MAIN (0x04) /*!< [31:24] main version */ -#define __STM32F1_CMSIS_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */ -#define __STM32F1_CMSIS_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ -#define __STM32F1_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */ -#define __STM32F1_CMSIS_VERSION ((__STM32F1_CMSIS_VERSION_MAIN << 24)\ - |(__STM32F1_CMSIS_VERSION_SUB1 << 16)\ - |(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\ - |(__STM32F1_CMSIS_VERSION_RC)) - -/** - * @} - */ - -/** @addtogroup Device_Included - * @{ - */ - -#if defined(STM32F100xB) - #include "stm32f100xb.h" -#elif defined(STM32F100xE) - #include "stm32f100xe.h" -#elif defined(STM32F101x6) - #include "stm32f101x6.h" -#elif defined(STM32F101xB) - #include "stm32f101xb.h" -#elif defined(STM32F101xE) - #include "stm32f101xe.h" -#elif defined(STM32F101xG) - #include "stm32f101xg.h" -#elif defined(STM32F102x6) - #include "stm32f102x6.h" -#elif defined(STM32F102xB) - #include "stm32f102xb.h" -#elif defined(STM32F103x6) - #include "stm32f103x6.h" -#elif defined(STM32F103xB) - #include "stm32f103xb.h" -#elif defined(STM32F103xE) - #include "stm32f103xe.h" -#elif defined(STM32F103xG) - #include "stm32f103xg.h" -#elif defined(STM32F105xC) - #include "stm32f105xc.h" -#elif defined(STM32F107xC) - #include "stm32f107xc.h" -#else - #error "Please select first the target STM32F1xx device used in your application (in stm32f1xx.h file)" -#endif - -/** - * @} - */ - -/** @addtogroup Exported_types - * @{ - */ -typedef enum -{ - RESET = 0, - SET = !RESET -} FlagStatus, ITStatus; - -typedef enum -{ - DISABLE = 0, - ENABLE = !DISABLE -} FunctionalState; -#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) - -typedef enum -{ - ERROR = 0, - SUCCESS = !ERROR -} ErrorStatus; - -/** - * @} - */ - - -/** @addtogroup Exported_macros - * @{ - */ -#define SET_BIT(REG, BIT) ((REG) |= (BIT)) - -#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) - -#define READ_BIT(REG, BIT) ((REG) & (BIT)) - -#define CLEAR_REG(REG) ((REG) = (0x0)) - -#define WRITE_REG(REG, VAL) ((REG) = (VAL)) - -#define READ_REG(REG) ((REG)) - -#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) - -#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) - - -/** - * @} - */ - -#if defined (USE_HAL_DRIVER) - #include "stm32f1xx_hal.h" -#endif /* USE_HAL_DRIVER */ - - -#ifdef __cplusplus -} -#endif /* __cplusplus */ - -#endif /* __STM32F1xx_H */ -/** - * @} - */ - -/** - * @} - */ - - - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h b/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h deleted file mode 100644 index 7d23de6..0000000 --- a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h +++ /dev/null @@ -1,116 +0,0 @@ -/** - ****************************************************************************** - * @file system_stm32f10x.h - * @author MCD Application Team - * @version V4.1.0 - * @date 29-April-2016 - * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f10x_system - * @{ - */ - -/** - * @brief Define to prevent recursive inclusion - */ -#ifndef __SYSTEM_STM32F10X_H -#define __SYSTEM_STM32F10X_H - -#ifdef __cplusplus - extern "C" { -#endif - -/** @addtogroup STM32F10x_System_Includes - * @{ - */ - -/** - * @} - */ - - -/** @addtogroup STM32F10x_System_Exported_types - * @{ - */ - -extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */ -extern const uint8_t AHBPrescTable[16]; /*!< AHB prescalers table values */ -extern const uint8_t APBPrescTable[8]; /*!< APB prescalers table values */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Exported_Constants - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Exported_Functions - * @{ - */ - -extern void SystemInit(void); -extern void SystemCoreClockUpdate(void); -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /*__SYSTEM_STM32F10X_H */ - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c b/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c deleted file mode 100644 index 9d07f89..0000000 --- a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c +++ /dev/null @@ -1,448 +0,0 @@ -/** - ****************************************************************************** - * @file system_stm32f1xx.c - * @author MCD Application Team - * @version V4.1.0 - * @date 29-April-2016 - * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. - * - * 1. This file provides two functions and one global variable to be called from - * user application: - * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier - * factors, AHB/APBx prescalers and Flash settings). - * This function is called at startup just after reset and - * before branch to main program. This call is made inside - * the "startup_stm32f1xx_xx.s" file. - * - * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used - * by the user application to setup the SysTick - * timer or configure other parameters. - * - * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must - * be called whenever the core clock is changed - * during program execution. - * - * 2. After each device reset the HSI (8 MHz) is used as system clock source. - * Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to - * configure the system clock before to branch to main program. - * - * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on - * the product used), refer to "HSE_VALUE". - * When HSE is used as system clock source, directly or through PLL, and you - * are using different crystal you have to adapt the HSE value to your own - * configuration. - * - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f1xx_system - * @{ - */ - -/** @addtogroup STM32F1xx_System_Private_Includes - * @{ - */ - -#include "stm32f1xx.h" - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_Defines - * @{ - */ - -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz. - This value can be provided and adapted by the user application. */ -#endif /* HSE_VALUE */ - -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)8000000) /*!< Default value of the Internal oscillator in Hz. - This value can be provided and adapted by the user application. */ -#endif /* HSI_VALUE */ - -/*!< Uncomment the following line if you need to use external SRAM */ -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) -/* #define DATA_IN_ExtSRAM */ -#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ - -/*!< Uncomment the following line if you need to relocate your vector Table in - Internal SRAM. */ -/* #define VECT_TAB_SRAM */ -#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. - This value must be a multiple of 0x200. */ - - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_Variables - * @{ - */ - -/******************************************************************************* -* Clock Definitions -*******************************************************************************/ -#if defined(STM32F100xB) ||defined(STM32F100xE) - uint32_t SystemCoreClock = 24000000; /*!< System Clock Frequency (Core Clock) */ -#else /*!< HSI Selected as System Clock source */ - uint32_t SystemCoreClock = 72000000; /*!< System Clock Frequency (Core Clock) */ -#endif - -const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; -const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4}; - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes - * @{ - */ - -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) -#ifdef DATA_IN_ExtSRAM - static void SystemInit_ExtMemCtl(void); -#endif /* DATA_IN_ExtSRAM */ -#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_Functions - * @{ - */ - -/** - * @brief Setup the microcontroller system - * Initialize the Embedded Flash Interface, the PLL and update the - * SystemCoreClock variable. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -void SystemInit (void) -{ - /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ - /* Set HSION bit */ - RCC->CR |= (uint32_t)0x00000001; - - /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ -#if !defined(STM32F105xC) && !defined(STM32F107xC) - RCC->CFGR &= (uint32_t)0xF8FF0000; -#else - RCC->CFGR &= (uint32_t)0xF0FF0000; -#endif /* STM32F105xC */ - - /* Reset HSEON, CSSON and PLLON bits */ - RCC->CR &= (uint32_t)0xFEF6FFFF; - - /* Reset HSEBYP bit */ - RCC->CR &= (uint32_t)0xFFFBFFFF; - - /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ - RCC->CFGR &= (uint32_t)0xFF80FFFF; - -#if defined(STM32F105xC) || defined(STM32F107xC) - /* Reset PLL2ON and PLL3ON bits */ - RCC->CR &= (uint32_t)0xEBFFFFFF; - - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x00FF0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#elif defined(STM32F100xB) || defined(STM32F100xE) - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#else - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; -#endif /* STM32F105xC */ - -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) - #ifdef DATA_IN_ExtSRAM - SystemInit_ExtMemCtl(); - #endif /* DATA_IN_ExtSRAM */ -#endif - -#ifdef VECT_TAB_SRAM - SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ -#else - SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ -#endif -} - -/** - * @brief Update SystemCoreClock variable according to Clock Register Values. - * The SystemCoreClock variable contains the core clock (HCLK), it can - * be used by the user application to setup the SysTick timer or configure - * other parameters. - * - * @note Each time the core clock (HCLK) changes, this function must be called - * to update SystemCoreClock variable value. Otherwise, any configuration - * based on this variable will be incorrect. - * - * @note - The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * - * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) - * - * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) - * - * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) - * or HSI_VALUE(*) multiplied by the PLL factors. - * - * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value - * 8 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * - * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value - * 8 MHz or 25 MHz, depending on the product used), user has to ensure - * that HSE_VALUE is same as the real frequency of the crystal used. - * Otherwise, this function may have wrong result. - * - * - The result of this function could be not correct when using fractional - * value for HSE crystal. - * @param None - * @retval None - */ -void SystemCoreClockUpdate (void) -{ - uint32_t tmp = 0, pllmull = 0, pllsource = 0; - -#if defined(STM32F105xC) || defined(STM32F107xC) - uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; -#endif /* STM32F105xC */ - -#if defined(STM32F100xB) || defined(STM32F100xE) - uint32_t prediv1factor = 0; -#endif /* STM32F100xB or STM32F100xE */ - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & RCC_CFGR_SWS; - - switch (tmp) - { - case 0x00: /* HSI used as system clock */ - SystemCoreClock = HSI_VALUE; - break; - case 0x04: /* HSE used as system clock */ - SystemCoreClock = HSE_VALUE; - break; - case 0x08: /* PLL used as system clock */ - - /* Get PLL clock source and multiplication factor ----------------------*/ - pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; - pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; - -#if !defined(STM32F105xC) && !defined(STM32F107xC) - pllmull = ( pllmull >> 18) + 2; - - if (pllsource == 0x00) - { - /* HSI oscillator clock divided by 2 selected as PLL clock entry */ - SystemCoreClock = (HSI_VALUE >> 1) * pllmull; - } - else - { - #if defined(STM32F100xB) || defined(STM32F100xE) - prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; - /* HSE oscillator clock selected as PREDIV1 clock entry */ - SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; - #else - /* HSE selected as PLL clock entry */ - if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET) - {/* HSE oscillator clock divided by 2 */ - SystemCoreClock = (HSE_VALUE >> 1) * pllmull; - } - else - { - SystemCoreClock = HSE_VALUE * pllmull; - } - #endif - } -#else - pllmull = pllmull >> 18; - - if (pllmull != 0x0D) - { - pllmull += 2; - } - else - { /* PLL multiplication factor = PLL input clock * 6.5 */ - pllmull = 13 / 2; - } - - if (pllsource == 0x00) - { - /* HSI oscillator clock divided by 2 selected as PLL clock entry */ - SystemCoreClock = (HSI_VALUE >> 1) * pllmull; - } - else - {/* PREDIV1 selected as PLL clock entry */ - - /* Get PREDIV1 clock source and division factor */ - prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC; - prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; - - if (prediv1source == 0) - { - /* HSE oscillator clock selected as PREDIV1 clock entry */ - SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; - } - else - {/* PLL2 clock selected as PREDIV1 clock entry */ - - /* Get PREDIV2 division factor and PLL2 multiplication factor */ - prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1; - pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; - SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; - } - } -#endif /* STM32F105xC */ - break; - - default: - SystemCoreClock = HSI_VALUE; - break; - } - - /* Compute HCLK clock frequency ----------------*/ - /* Get HCLK prescaler */ - tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; - /* HCLK clock frequency */ - SystemCoreClock >>= tmp; -} - -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) -/** - * @brief Setup the external memory controller. Called in startup_stm32f1xx.s - * before jump to __main - * @param None - * @retval None - */ -#ifdef DATA_IN_ExtSRAM -/** - * @brief Setup the external memory controller. - * Called in startup_stm32f1xx_xx.s/.c before jump to main. - * This function configures the external SRAM mounted on STM3210E-EVAL - * board (STM32 High density devices). This SRAM will be used as program - * data memory (including heap and stack). - * @param None - * @retval None - */ -void SystemInit_ExtMemCtl(void) -{ - __IO uint32_t tmpreg; - /*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is - required, then adjust the Register Addresses */ - - /* Enable FSMC clock */ - RCC->AHBENR = 0x00000114; - - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN); - - /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ - RCC->APB2ENR = 0x000001E0; - - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN); - - (void)(tmpreg); - -/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ -/*---------------- SRAM Address lines configuration -------------------------*/ -/*---------------- NOE and NWE configuration --------------------------------*/ -/*---------------- NE3 configuration ----------------------------------------*/ -/*---------------- NBL0, NBL1 configuration ---------------------------------*/ - - GPIOD->CRL = 0x44BB44BB; - GPIOD->CRH = 0xBBBBBBBB; - - GPIOE->CRL = 0xB44444BB; - GPIOE->CRH = 0xBBBBBBBB; - - GPIOF->CRL = 0x44BBBBBB; - GPIOF->CRH = 0xBBBB4444; - - GPIOG->CRL = 0x44BBBBBB; - GPIOG->CRH = 0x444B4B44; - -/*---------------- FSMC Configuration ---------------------------------------*/ -/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ - - FSMC_Bank1->BTCR[4] = 0x00001091; - FSMC_Bank1->BTCR[5] = 0x00110212; -} -#endif /* DATA_IN_ExtSRAM */ -#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/CMSIS/Include/arm_common_tables.h b/stm32cubemx/Drivers/CMSIS/Include/arm_common_tables.h deleted file mode 100644 index 8742a56..0000000 --- a/stm32cubemx/Drivers/CMSIS/Include/arm_common_tables.h +++ /dev/null @@ -1,136 +0,0 @@ -/* ---------------------------------------------------------------------- -* Copyright (C) 2010-2014 ARM Limited. All rights reserved. -* -* $Date: 19. October 2015 -* $Revision: V.1.4.5 a -* -* Project: CMSIS DSP Library -* Title: arm_common_tables.h -* -* Description: This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions -* -* Target Processor: Cortex-M4/Cortex-M3 -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions -* are met: -* - Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* - Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in -* the documentation and/or other materials provided with the -* distribution. -* - Neither the name of ARM LIMITED nor the names of its contributors -* may be used to endorse or promote products derived from this -* software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -* POSSIBILITY OF SUCH DAMAGE. -* -------------------------------------------------------------------- */ - -#ifndef _ARM_COMMON_TABLES_H -#define _ARM_COMMON_TABLES_H - -#include "arm_math.h" - -extern const uint16_t armBitRevTable[1024]; -extern const q15_t armRecipTableQ15[64]; -extern const q31_t armRecipTableQ31[64]; -/* extern const q31_t realCoefAQ31[1024]; */ -/* extern const q31_t realCoefBQ31[1024]; */ -extern const float32_t twiddleCoef_16[32]; -extern const float32_t twiddleCoef_32[64]; -extern const float32_t twiddleCoef_64[128]; -extern const float32_t twiddleCoef_128[256]; -extern const float32_t twiddleCoef_256[512]; -extern const float32_t twiddleCoef_512[1024]; -extern const float32_t twiddleCoef_1024[2048]; -extern const float32_t twiddleCoef_2048[4096]; -extern const float32_t twiddleCoef_4096[8192]; -#define twiddleCoef twiddleCoef_4096 -extern const q31_t twiddleCoef_16_q31[24]; -extern const q31_t twiddleCoef_32_q31[48]; -extern const q31_t twiddleCoef_64_q31[96]; -extern const q31_t twiddleCoef_128_q31[192]; -extern const q31_t twiddleCoef_256_q31[384]; -extern const q31_t twiddleCoef_512_q31[768]; -extern const q31_t twiddleCoef_1024_q31[1536]; -extern const q31_t twiddleCoef_2048_q31[3072]; -extern const q31_t twiddleCoef_4096_q31[6144]; -extern const q15_t twiddleCoef_16_q15[24]; -extern const q15_t twiddleCoef_32_q15[48]; -extern const q15_t twiddleCoef_64_q15[96]; -extern const q15_t twiddleCoef_128_q15[192]; -extern const q15_t twiddleCoef_256_q15[384]; -extern const q15_t twiddleCoef_512_q15[768]; -extern const q15_t twiddleCoef_1024_q15[1536]; -extern const q15_t twiddleCoef_2048_q15[3072]; -extern const q15_t twiddleCoef_4096_q15[6144]; -extern const float32_t twiddleCoef_rfft_32[32]; -extern const float32_t twiddleCoef_rfft_64[64]; -extern const float32_t twiddleCoef_rfft_128[128]; -extern const float32_t twiddleCoef_rfft_256[256]; -extern const float32_t twiddleCoef_rfft_512[512]; -extern const float32_t twiddleCoef_rfft_1024[1024]; -extern const float32_t twiddleCoef_rfft_2048[2048]; -extern const float32_t twiddleCoef_rfft_4096[4096]; - - -/* floating-point bit reversal tables */ -#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20 ) -#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48 ) -#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56 ) -#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 ) -#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 ) -#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 ) -#define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800) -#define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808) -#define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032) - -extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE__16_TABLE_LENGTH]; -extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE__32_TABLE_LENGTH]; -extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE__64_TABLE_LENGTH]; -extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH]; -extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH]; -extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH]; -extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE1024_TABLE_LENGTH]; -extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENGTH]; -extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH]; - -/* fixed-point bit reversal tables */ -#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12 ) -#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24 ) -#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56 ) -#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112 ) -#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240 ) -#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480 ) -#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992 ) -#define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984) -#define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032) - -extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH]; -extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH]; -extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH]; -extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH]; -extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH]; -extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH]; -extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH]; -extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH]; -extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH]; - -/* Tables for Fast Math Sine and Cosine */ -extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1]; -extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1]; -extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1]; - -#endif /* ARM_COMMON_TABLES_H */ diff --git a/stm32cubemx/Drivers/CMSIS/Include/arm_const_structs.h b/stm32cubemx/Drivers/CMSIS/Include/arm_const_structs.h deleted file mode 100644 index 726d06e..0000000 --- a/stm32cubemx/Drivers/CMSIS/Include/arm_const_structs.h +++ /dev/null @@ -1,79 +0,0 @@ -/* ---------------------------------------------------------------------- -* Copyright (C) 2010-2014 ARM Limited. All rights reserved. -* -* $Date: 19. March 2015 -* $Revision: V.1.4.5 -* -* Project: CMSIS DSP Library -* Title: arm_const_structs.h -* -* Description: This file has constant structs that are initialized for -* user convenience. For example, some can be given as -* arguments to the arm_cfft_f32() function. -* -* Target Processor: Cortex-M4/Cortex-M3 -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions -* are met: -* - Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* - Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in -* the documentation and/or other materials provided with the -* distribution. -* - Neither the name of ARM LIMITED nor the names of its contributors -* may be used to endorse or promote products derived from this -* software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -* POSSIBILITY OF SUCH DAMAGE. -* -------------------------------------------------------------------- */ - -#ifndef _ARM_CONST_STRUCTS_H -#define _ARM_CONST_STRUCTS_H - -#include "arm_math.h" -#include "arm_common_tables.h" - - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16; - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32; - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64; - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128; - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256; - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512; - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024; - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048; - extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096; - - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048; - extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096; - - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048; - extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096; - -#endif diff --git a/stm32cubemx/Drivers/CMSIS/Include/arm_math.h b/stm32cubemx/Drivers/CMSIS/Include/arm_math.h deleted file mode 100644 index d33f8a9..0000000 --- a/stm32cubemx/Drivers/CMSIS/Include/arm_math.h +++ /dev/null @@ -1,7154 +0,0 @@ -/* ---------------------------------------------------------------------- -* Copyright (C) 2010-2015 ARM Limited. All rights reserved. -* -* $Date: 20. October 2015 -* $Revision: V1.4.5 b -* -* Project: CMSIS DSP Library -* Title: arm_math.h -* -* Description: Public header file for CMSIS DSP Library -* -* Target Processor: Cortex-M7/Cortex-M4/Cortex-M3/Cortex-M0 -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions -* are met: -* - Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* - Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in -* the documentation and/or other materials provided with the -* distribution. -* - Neither the name of ARM LIMITED nor the names of its contributors -* may be used to endorse or promote products derived from this -* software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -* POSSIBILITY OF SUCH DAMAGE. - * -------------------------------------------------------------------- */ - -/** - \mainpage CMSIS DSP Software Library - * - * Introduction - * ------------ - * - * This user manual describes the CMSIS DSP software library, - * a suite of common signal processing functions for use on Cortex-M processor based devices. - * - * The library is divided into a number of functions each covering a specific category: - * - Basic math functions - * - Fast math functions - * - Complex math functions - * - Filters - * - Matrix functions - * - Transforms - * - Motor control functions - * - Statistical functions - * - Support functions - * - Interpolation functions - * - * The library has separate functions for operating on 8-bit integers, 16-bit integers, - * 32-bit integer and 32-bit floating-point values. - * - * Using the Library - * ------------ - * - * The library installer contains prebuilt versions of the libraries in the <code>Lib</code> folder. - * - arm_cortexM7lfdp_math.lib (Little endian and Double Precision Floating Point Unit on Cortex-M7) - * - arm_cortexM7bfdp_math.lib (Big endian and Double Precision Floating Point Unit on Cortex-M7) - * - arm_cortexM7lfsp_math.lib (Little endian and Single Precision Floating Point Unit on Cortex-M7) - * - arm_cortexM7bfsp_math.lib (Big endian and Single Precision Floating Point Unit on Cortex-M7) - * - arm_cortexM7l_math.lib (Little endian on Cortex-M7) - * - arm_cortexM7b_math.lib (Big endian on Cortex-M7) - * - arm_cortexM4lf_math.lib (Little endian and Floating Point Unit on Cortex-M4) - * - arm_cortexM4bf_math.lib (Big endian and Floating Point Unit on Cortex-M4) - * - arm_cortexM4l_math.lib (Little endian on Cortex-M4) - * - arm_cortexM4b_math.lib (Big endian on Cortex-M4) - * - arm_cortexM3l_math.lib (Little endian on Cortex-M3) - * - arm_cortexM3b_math.lib (Big endian on Cortex-M3) - * - arm_cortexM0l_math.lib (Little endian on Cortex-M0 / CortexM0+) - * - arm_cortexM0b_math.lib (Big endian on Cortex-M0 / CortexM0+) - * - * The library functions are declared in the public file <code>arm_math.h</code> which is placed in the <code>Include</code> folder. - * Simply include this file and link the appropriate library in the application and begin calling the library functions. The Library supports single - * public header file <code> arm_math.h</code> for Cortex-M7/M4/M3/M0/M0+ with little endian and big endian. Same header file will be used for floating point unit(FPU) variants. - * Define the appropriate pre processor MACRO ARM_MATH_CM7 or ARM_MATH_CM4 or ARM_MATH_CM3 or - * ARM_MATH_CM0 or ARM_MATH_CM0PLUS depending on the target processor in the application. - * - * Examples - * -------- - * - * The library ships with a number of examples which demonstrate how to use the library functions. - * - * Toolchain Support - * ------------ - * - * The library has been developed and tested with MDK-ARM version 5.14.0.0 - * The library is being tested in GCC and IAR toolchains and updates on this activity will be made available shortly. - * - * Building the Library - * ------------ - * - * The library installer contains a project file to re build libraries on MDK-ARM Tool chain in the <code>CMSIS\\DSP_Lib\\Source\\ARM</code> folder. - * - arm_cortexM_math.uvprojx - * - * - * The libraries can be built by opening the arm_cortexM_math.uvprojx project in MDK-ARM, selecting a specific target, and defining the optional pre processor MACROs detailed above. - * - * Pre-processor Macros - * ------------ - * - * Each library project have differant pre-processor macros. - * - * - UNALIGNED_SUPPORT_DISABLE: - * - * Define macro UNALIGNED_SUPPORT_DISABLE, If the silicon does not support unaligned memory access - * - * - ARM_MATH_BIG_ENDIAN: - * - * Define macro ARM_MATH_BIG_ENDIAN to build the library for big endian targets. By default library builds for little endian targets. - * - * - ARM_MATH_MATRIX_CHECK: - * - * Define macro ARM_MATH_MATRIX_CHECK for checking on the input and output sizes of matrices - * - * - ARM_MATH_ROUNDING: - * - * Define macro ARM_MATH_ROUNDING for rounding on support functions - * - * - ARM_MATH_CMx: - * - * Define macro ARM_MATH_CM4 for building the library on Cortex-M4 target, ARM_MATH_CM3 for building library on Cortex-M3 target - * and ARM_MATH_CM0 for building library on Cortex-M0 target, ARM_MATH_CM0PLUS for building library on Cortex-M0+ target, and - * ARM_MATH_CM7 for building the library on cortex-M7. - * - * - __FPU_PRESENT: - * - * Initialize macro __FPU_PRESENT = 1 when building on FPU supported Targets. Enable this macro for M4bf and M4lf libraries - * - * <hr> - * CMSIS-DSP in ARM::CMSIS Pack - * ----------------------------- - * - * The following files relevant to CMSIS-DSP are present in the <b>ARM::CMSIS</b> Pack directories: - * |File/Folder |Content | - * |------------------------------|------------------------------------------------------------------------| - * |\b CMSIS\\Documentation\\DSP | This documentation | - * |\b CMSIS\\DSP_Lib | Software license agreement (license.txt) | - * |\b CMSIS\\DSP_Lib\\Examples | Example projects demonstrating the usage of the library functions | - * |\b CMSIS\\DSP_Lib\\Source | Source files for rebuilding the library | - * - * <hr> - * Revision History of CMSIS-DSP - * ------------ - * Please refer to \ref ChangeLog_pg. - * - * Copyright Notice - * ------------ - * - * Copyright (C) 2010-2015 ARM Limited. All rights reserved. - */ - - -/** - * @defgroup groupMath Basic Math Functions - */ - -/** - * @defgroup groupFastMath Fast Math Functions - * This set of functions provides a fast approximation to sine, cosine, and square root. - * As compared to most of the other functions in the CMSIS math library, the fast math functions - * operate on individual values and not arrays. - * There are separate functions for Q15, Q31, and floating-point data. - * - */ - -/** - * @defgroup groupCmplxMath Complex Math Functions - * This set of functions operates on complex data vectors. - * The data in the complex arrays is stored in an interleaved fashion - * (real, imag, real, imag, ...). - * In the API functions, the number of samples in a complex array refers - * to the number of complex values; the array contains twice this number of - * real values. - */ - -/** - * @defgroup groupFilters Filtering Functions - */ - -/** - * @defgroup groupMatrix Matrix Functions - * - * This set of functions provides basic matrix math operations. - * The functions operate on matrix data structures. For example, - * the type - * definition for the floating-point matrix structure is shown - * below: - * <pre> - * typedef struct - * { - * uint16_t numRows; // number of rows of the matrix. - * uint16_t numCols; // number of columns of the matrix. - * float32_t *pData; // points to the data of the matrix. - * } arm_matrix_instance_f32; - * </pre> - * There are similar definitions for Q15 and Q31 data types. - * - * The structure specifies the size of the matrix and then points to - * an array of data. The array is of size <code>numRows X numCols</code> - * and the values are arranged in row order. That is, the - * matrix element (i, j) is stored at: - * <pre> - * pData[i*numCols + j] - * </pre> - * - * \par Init Functions - * There is an associated initialization function for each type of matrix - * data structure. - * The initialization function sets the values of the internal structure fields. - * Refer to the function <code>arm_mat_init_f32()</code>, <code>arm_mat_init_q31()</code> - * and <code>arm_mat_init_q15()</code> for floating-point, Q31 and Q15 types, respectively. - * - * \par - * Use of the initialization function is optional. However, if initialization function is used - * then the instance structure cannot be placed into a const data section. - * To place the instance structure in a const data - * section, manually initialize the data structure. For example: - * <pre> - * <code>arm_matrix_instance_f32 S = {nRows, nColumns, pData};</code> - * <code>arm_matrix_instance_q31 S = {nRows, nColumns, pData};</code> - * <code>arm_matrix_instance_q15 S = {nRows, nColumns, pData};</code> - * </pre> - * where <code>nRows</code> specifies the number of rows, <code>nColumns</code> - * specifies the number of columns, and <code>pData</code> points to the - * data array. - * - * \par Size Checking - * By default all of the matrix functions perform size checking on the input and - * output matrices. For example, the matrix addition function verifies that the - * two input matrices and the output matrix all have the same number of rows and - * columns. If the size check fails the functions return: - * <pre> - * ARM_MATH_SIZE_MISMATCH - * </pre> - * Otherwise the functions return - * <pre> - * ARM_MATH_SUCCESS - * </pre> - * There is some overhead associated with this matrix size checking. - * The matrix size checking is enabled via the \#define - * <pre> - * ARM_MATH_MATRIX_CHECK - * </pre> - * within the library project settings. By default this macro is defined - * and size checking is enabled. By changing the project settings and - * undefining this macro size checking is eliminated and the functions - * run a bit faster. With size checking disabled the functions always - * return <code>ARM_MATH_SUCCESS</code>. - */ - -/** - * @defgroup groupTransforms Transform Functions - */ - -/** - * @defgroup groupController Controller Functions - */ - -/** - * @defgroup groupStats Statistics Functions - */ -/** - * @defgroup groupSupport Support Functions - */ - -/** - * @defgroup groupInterpolation Interpolation Functions - * These functions perform 1- and 2-dimensional interpolation of data. - * Linear interpolation is used for 1-dimensional data and - * bilinear interpolation is used for 2-dimensional data. - */ - -/** - * @defgroup groupExamples Examples - */ -#ifndef _ARM_MATH_H -#define _ARM_MATH_H - -/* ignore some GCC warnings */ -#if defined ( __GNUC__ ) -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wsign-conversion" -#pragma GCC diagnostic ignored "-Wconversion" -#pragma GCC diagnostic ignored "-Wunused-parameter" -#endif - -#define __CMSIS_GENERIC /* disable NVIC and Systick functions */ - -#if defined(ARM_MATH_CM7) - #include "core_cm7.h" -#elif defined (ARM_MATH_CM4) - #include "core_cm4.h" -#elif defined (ARM_MATH_CM3) - #include "core_cm3.h" -#elif defined (ARM_MATH_CM0) - #include "core_cm0.h" - #define ARM_MATH_CM0_FAMILY -#elif defined (ARM_MATH_CM0PLUS) - #include "core_cm0plus.h" - #define ARM_MATH_CM0_FAMILY -#else - #error "Define according the used Cortex core ARM_MATH_CM7, ARM_MATH_CM4, ARM_MATH_CM3, ARM_MATH_CM0PLUS or ARM_MATH_CM0" -#endif - -#undef __CMSIS_GENERIC /* enable NVIC and Systick functions */ -#include "string.h" -#include "math.h" -#ifdef __cplusplus -extern "C" -{ -#endif - - - /** - * @brief Macros required for reciprocal calculation in Normalized LMS - */ - -#define DELTA_Q31 (0x100) -#define DELTA_Q15 0x5 -#define INDEX_MASK 0x0000003F -#ifndef PI -#define PI 3.14159265358979f -#endif - - /** - * @brief Macros required for SINE and COSINE Fast math approximations - */ - -#define FAST_MATH_TABLE_SIZE 512 -#define FAST_MATH_Q31_SHIFT (32 - 10) -#define FAST_MATH_Q15_SHIFT (16 - 10) -#define CONTROLLER_Q31_SHIFT (32 - 9) -#define TABLE_SIZE 256 -#define TABLE_SPACING_Q31 0x400000 -#define TABLE_SPACING_Q15 0x80 - - /** - * @brief Macros required for SINE and COSINE Controller functions - */ - /* 1.31(q31) Fixed value of 2/360 */ - /* -1 to +1 is divided into 360 values so total spacing is (2/360) */ -#define INPUT_SPACING 0xB60B61 - - /** - * @brief Macro for Unaligned Support - */ -#ifndef UNALIGNED_SUPPORT_DISABLE - #define ALIGN4 -#else - #if defined (__GNUC__) - #define ALIGN4 __attribute__((aligned(4))) - #else - #define ALIGN4 __align(4) - #endif -#endif /* #ifndef UNALIGNED_SUPPORT_DISABLE */ - - /** - * @brief Error status returned by some functions in the library. - */ - - typedef enum - { - ARM_MATH_SUCCESS = 0, /**< No error */ - ARM_MATH_ARGUMENT_ERROR = -1, /**< One or more arguments are incorrect */ - ARM_MATH_LENGTH_ERROR = -2, /**< Length of data buffer is incorrect */ - ARM_MATH_SIZE_MISMATCH = -3, /**< Size of matrices is not compatible with the operation. */ - ARM_MATH_NANINF = -4, /**< Not-a-number (NaN) or infinity is generated */ - ARM_MATH_SINGULAR = -5, /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */ - ARM_MATH_TEST_FAILURE = -6 /**< Test Failed */ - } arm_status; - - /** - * @brief 8-bit fractional data type in 1.7 format. - */ - typedef int8_t q7_t; - - /** - * @brief 16-bit fractional data type in 1.15 format. - */ - typedef int16_t q15_t; - - /** - * @brief 32-bit fractional data type in 1.31 format. - */ - typedef int32_t q31_t; - - /** - * @brief 64-bit fractional data type in 1.63 format. - */ - typedef int64_t q63_t; - - /** - * @brief 32-bit floating-point type definition. - */ - typedef float float32_t; - - /** - * @brief 64-bit floating-point type definition. - */ - typedef double float64_t; - - /** - * @brief definition to read/write two 16 bit values. - */ -#if defined __CC_ARM - #define __SIMD32_TYPE int32_t __packed - #define CMSIS_UNUSED __attribute__((unused)) - -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #define __SIMD32_TYPE int32_t - #define CMSIS_UNUSED __attribute__((unused)) - -#elif defined __GNUC__ - #define __SIMD32_TYPE int32_t - #define CMSIS_UNUSED __attribute__((unused)) - -#elif defined __ICCARM__ - #define __SIMD32_TYPE int32_t __packed - #define CMSIS_UNUSED - -#elif defined __CSMC__ - #define __SIMD32_TYPE int32_t - #define CMSIS_UNUSED - -#elif defined __TASKING__ - #define __SIMD32_TYPE __unaligned int32_t - #define CMSIS_UNUSED - -#else - #error Unknown compiler -#endif - -#define __SIMD32(addr) (*(__SIMD32_TYPE **) & (addr)) -#define __SIMD32_CONST(addr) ((__SIMD32_TYPE *)(addr)) -#define _SIMD32_OFFSET(addr) (*(__SIMD32_TYPE *) (addr)) -#define __SIMD64(addr) (*(int64_t **) & (addr)) - -#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) - /** - * @brief definition to pack two 16 bit values. - */ -#define __PKHBT(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0x0000FFFF) | \ - (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000) ) -#define __PKHTB(ARG1, ARG2, ARG3) ( (((int32_t)(ARG1) << 0) & (int32_t)0xFFFF0000) | \ - (((int32_t)(ARG2) >> ARG3) & (int32_t)0x0000FFFF) ) - -#endif - - - /** - * @brief definition to pack four 8 bit values. - */ -#ifndef ARM_MATH_BIG_ENDIAN - -#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v0) << 0) & (int32_t)0x000000FF) | \ - (((int32_t)(v1) << 8) & (int32_t)0x0000FF00) | \ - (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) | \ - (((int32_t)(v3) << 24) & (int32_t)0xFF000000) ) -#else - -#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v3) << 0) & (int32_t)0x000000FF) | \ - (((int32_t)(v2) << 8) & (int32_t)0x0000FF00) | \ - (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) | \ - (((int32_t)(v0) << 24) & (int32_t)0xFF000000) ) - -#endif - - - /** - * @brief Clips Q63 to Q31 values. - */ - static __INLINE q31_t clip_q63_to_q31( - q63_t x) - { - return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ? - ((0x7FFFFFFF ^ ((q31_t) (x >> 63)))) : (q31_t) x; - } - - /** - * @brief Clips Q63 to Q15 values. - */ - static __INLINE q15_t clip_q63_to_q15( - q63_t x) - { - return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ? - ((0x7FFF ^ ((q15_t) (x >> 63)))) : (q15_t) (x >> 15); - } - - /** - * @brief Clips Q31 to Q7 values. - */ - static __INLINE q7_t clip_q31_to_q7( - q31_t x) - { - return ((q31_t) (x >> 24) != ((q31_t) x >> 23)) ? - ((0x7F ^ ((q7_t) (x >> 31)))) : (q7_t) x; - } - - /** - * @brief Clips Q31 to Q15 values. - */ - static __INLINE q15_t clip_q31_to_q15( - q31_t x) - { - return ((q31_t) (x >> 16) != ((q31_t) x >> 15)) ? - ((0x7FFF ^ ((q15_t) (x >> 31)))) : (q15_t) x; - } - - /** - * @brief Multiplies 32 X 64 and returns 32 bit result in 2.30 format. - */ - - static __INLINE q63_t mult32x64( - q63_t x, - q31_t y) - { - return ((((q63_t) (x & 0x00000000FFFFFFFF) * y) >> 32) + - (((q63_t) (x >> 32) * y))); - } - -/* - #if defined (ARM_MATH_CM0_FAMILY) && defined ( __CC_ARM ) - #define __CLZ __clz - #endif - */ -/* note: function can be removed when all toolchain support __CLZ for Cortex-M0 */ -#if defined (ARM_MATH_CM0_FAMILY) && ((defined (__ICCARM__)) ) - static __INLINE uint32_t __CLZ( - q31_t data); - - static __INLINE uint32_t __CLZ( - q31_t data) - { - uint32_t count = 0; - uint32_t mask = 0x80000000; - - while((data & mask) == 0) - { - count += 1u; - mask = mask >> 1u; - } - - return (count); - } -#endif - - /** - * @brief Function to Calculates 1/in (reciprocal) value of Q31 Data type. - */ - - static __INLINE uint32_t arm_recip_q31( - q31_t in, - q31_t * dst, - q31_t * pRecipTable) - { - q31_t out; - uint32_t tempVal; - uint32_t index, i; - uint32_t signBits; - - if(in > 0) - { - signBits = ((uint32_t) (__CLZ( in) - 1)); - } - else - { - signBits = ((uint32_t) (__CLZ(-in) - 1)); - } - - /* Convert input sample to 1.31 format */ - in = (in << signBits); - - /* calculation of index for initial approximated Val */ - index = (uint32_t)(in >> 24); - index = (index & INDEX_MASK); - - /* 1.31 with exp 1 */ - out = pRecipTable[index]; - - /* calculation of reciprocal value */ - /* running approximation for two iterations */ - for (i = 0u; i < 2u; i++) - { - tempVal = (uint32_t) (((q63_t) in * out) >> 31); - tempVal = 0x7FFFFFFFu - tempVal; - /* 1.31 with exp 1 */ - /* out = (q31_t) (((q63_t) out * tempVal) >> 30); */ - out = clip_q63_to_q31(((q63_t) out * tempVal) >> 30); - } - - /* write output */ - *dst = out; - - /* return num of signbits of out = 1/in value */ - return (signBits + 1u); - } - - - /** - * @brief Function to Calculates 1/in (reciprocal) value of Q15 Data type. - */ - static __INLINE uint32_t arm_recip_q15( - q15_t in, - q15_t * dst, - q15_t * pRecipTable) - { - q15_t out = 0; - uint32_t tempVal = 0; - uint32_t index = 0, i = 0; - uint32_t signBits = 0; - - if(in > 0) - { - signBits = ((uint32_t)(__CLZ( in) - 17)); - } - else - { - signBits = ((uint32_t)(__CLZ(-in) - 17)); - } - - /* Convert input sample to 1.15 format */ - in = (in << signBits); - - /* calculation of index for initial approximated Val */ - index = (uint32_t)(in >> 8); - index = (index & INDEX_MASK); - - /* 1.15 with exp 1 */ - out = pRecipTable[index]; - - /* calculation of reciprocal value */ - /* running approximation for two iterations */ - for (i = 0u; i < 2u; i++) - { - tempVal = (uint32_t) (((q31_t) in * out) >> 15); - tempVal = 0x7FFFu - tempVal; - /* 1.15 with exp 1 */ - out = (q15_t) (((q31_t) out * tempVal) >> 14); - /* out = clip_q31_to_q15(((q31_t) out * tempVal) >> 14); */ - } - - /* write output */ - *dst = out; - - /* return num of signbits of out = 1/in value */ - return (signBits + 1); - } - - - /* - * @brief C custom defined intrinisic function for only M0 processors - */ -#if defined(ARM_MATH_CM0_FAMILY) - static __INLINE q31_t __SSAT( - q31_t x, - uint32_t y) - { - int32_t posMax, negMin; - uint32_t i; - - posMax = 1; - for (i = 0; i < (y - 1); i++) - { - posMax = posMax * 2; - } - - if(x > 0) - { - posMax = (posMax - 1); - - if(x > posMax) - { - x = posMax; - } - } - else - { - negMin = -posMax; - - if(x < negMin) - { - x = negMin; - } - } - return (x); - } -#endif /* end of ARM_MATH_CM0_FAMILY */ - - - /* - * @brief C custom defined intrinsic function for M3 and M0 processors - */ -#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) - - /* - * @brief C custom defined QADD8 for M3 and M0 processors - */ - static __INLINE uint32_t __QADD8( - uint32_t x, - uint32_t y) - { - q31_t r, s, t, u; - - r = __SSAT(((((q31_t)x << 24) >> 24) + (((q31_t)y << 24) >> 24)), 8) & (int32_t)0x000000FF; - s = __SSAT(((((q31_t)x << 16) >> 24) + (((q31_t)y << 16) >> 24)), 8) & (int32_t)0x000000FF; - t = __SSAT(((((q31_t)x << 8) >> 24) + (((q31_t)y << 8) >> 24)), 8) & (int32_t)0x000000FF; - u = __SSAT(((((q31_t)x ) >> 24) + (((q31_t)y ) >> 24)), 8) & (int32_t)0x000000FF; - - return ((uint32_t)((u << 24) | (t << 16) | (s << 8) | (r ))); - } - - - /* - * @brief C custom defined QSUB8 for M3 and M0 processors - */ - static __INLINE uint32_t __QSUB8( - uint32_t x, - uint32_t y) - { - q31_t r, s, t, u; - - r = __SSAT(((((q31_t)x << 24) >> 24) - (((q31_t)y << 24) >> 24)), 8) & (int32_t)0x000000FF; - s = __SSAT(((((q31_t)x << 16) >> 24) - (((q31_t)y << 16) >> 24)), 8) & (int32_t)0x000000FF; - t = __SSAT(((((q31_t)x << 8) >> 24) - (((q31_t)y << 8) >> 24)), 8) & (int32_t)0x000000FF; - u = __SSAT(((((q31_t)x ) >> 24) - (((q31_t)y ) >> 24)), 8) & (int32_t)0x000000FF; - - return ((uint32_t)((u << 24) | (t << 16) | (s << 8) | (r ))); - } - - - /* - * @brief C custom defined QADD16 for M3 and M0 processors - */ - static __INLINE uint32_t __QADD16( - uint32_t x, - uint32_t y) - { -/* q31_t r, s; without initialisation 'arm_offset_q15 test' fails but 'intrinsic' tests pass! for armCC */ - q31_t r = 0, s = 0; - - r = __SSAT(((((q31_t)x << 16) >> 16) + (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF; - s = __SSAT(((((q31_t)x ) >> 16) + (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF; - - return ((uint32_t)((s << 16) | (r ))); - } - - - /* - * @brief C custom defined SHADD16 for M3 and M0 processors - */ - static __INLINE uint32_t __SHADD16( - uint32_t x, - uint32_t y) - { - q31_t r, s; - - r = (((((q31_t)x << 16) >> 16) + (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF; - s = (((((q31_t)x ) >> 16) + (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF; - - return ((uint32_t)((s << 16) | (r ))); - } - - - /* - * @brief C custom defined QSUB16 for M3 and M0 processors - */ - static __INLINE uint32_t __QSUB16( - uint32_t x, - uint32_t y) - { - q31_t r, s; - - r = __SSAT(((((q31_t)x << 16) >> 16) - (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF; - s = __SSAT(((((q31_t)x ) >> 16) - (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF; - - return ((uint32_t)((s << 16) | (r ))); - } - - - /* - * @brief C custom defined SHSUB16 for M3 and M0 processors - */ - static __INLINE uint32_t __SHSUB16( - uint32_t x, - uint32_t y) - { - q31_t r, s; - - r = (((((q31_t)x << 16) >> 16) - (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF; - s = (((((q31_t)x ) >> 16) - (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF; - - return ((uint32_t)((s << 16) | (r ))); - } - - - /* - * @brief C custom defined QASX for M3 and M0 processors - */ - static __INLINE uint32_t __QASX( - uint32_t x, - uint32_t y) - { - q31_t r, s; - - r = __SSAT(((((q31_t)x << 16) >> 16) - (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF; - s = __SSAT(((((q31_t)x ) >> 16) + (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF; - - return ((uint32_t)((s << 16) | (r ))); - } - - - /* - * @brief C custom defined SHASX for M3 and M0 processors - */ - static __INLINE uint32_t __SHASX( - uint32_t x, - uint32_t y) - { - q31_t r, s; - - r = (((((q31_t)x << 16) >> 16) - (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF; - s = (((((q31_t)x ) >> 16) + (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF; - - return ((uint32_t)((s << 16) | (r ))); - } - - - /* - * @brief C custom defined QSAX for M3 and M0 processors - */ - static __INLINE uint32_t __QSAX( - uint32_t x, - uint32_t y) - { - q31_t r, s; - - r = __SSAT(((((q31_t)x << 16) >> 16) + (((q31_t)y ) >> 16)), 16) & (int32_t)0x0000FFFF; - s = __SSAT(((((q31_t)x ) >> 16) - (((q31_t)y << 16) >> 16)), 16) & (int32_t)0x0000FFFF; - - return ((uint32_t)((s << 16) | (r ))); - } - - - /* - * @brief C custom defined SHSAX for M3 and M0 processors - */ - static __INLINE uint32_t __SHSAX( - uint32_t x, - uint32_t y) - { - q31_t r, s; - - r = (((((q31_t)x << 16) >> 16) + (((q31_t)y ) >> 16)) >> 1) & (int32_t)0x0000FFFF; - s = (((((q31_t)x ) >> 16) - (((q31_t)y << 16) >> 16)) >> 1) & (int32_t)0x0000FFFF; - - return ((uint32_t)((s << 16) | (r ))); - } - - - /* - * @brief C custom defined SMUSDX for M3 and M0 processors - */ - static __INLINE uint32_t __SMUSDX( - uint32_t x, - uint32_t y) - { - return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) - - ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) )); - } - - /* - * @brief C custom defined SMUADX for M3 and M0 processors - */ - static __INLINE uint32_t __SMUADX( - uint32_t x, - uint32_t y) - { - return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) + - ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) )); - } - - - /* - * @brief C custom defined QADD for M3 and M0 processors - */ - static __INLINE int32_t __QADD( - int32_t x, - int32_t y) - { - return ((int32_t)(clip_q63_to_q31((q63_t)x + (q31_t)y))); - } - - - /* - * @brief C custom defined QSUB for M3 and M0 processors - */ - static __INLINE int32_t __QSUB( - int32_t x, - int32_t y) - { - return ((int32_t)(clip_q63_to_q31((q63_t)x - (q31_t)y))); - } - - - /* - * @brief C custom defined SMLAD for M3 and M0 processors - */ - static __INLINE uint32_t __SMLAD( - uint32_t x, - uint32_t y, - uint32_t sum) - { - return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) + - ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) + - ( ((q31_t)sum ) ) )); - } - - - /* - * @brief C custom defined SMLADX for M3 and M0 processors - */ - static __INLINE uint32_t __SMLADX( - uint32_t x, - uint32_t y, - uint32_t sum) - { - return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) + - ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) + - ( ((q31_t)sum ) ) )); - } - - - /* - * @brief C custom defined SMLSDX for M3 and M0 processors - */ - static __INLINE uint32_t __SMLSDX( - uint32_t x, - uint32_t y, - uint32_t sum) - { - return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) - - ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) + - ( ((q31_t)sum ) ) )); - } - - - /* - * @brief C custom defined SMLALD for M3 and M0 processors - */ - static __INLINE uint64_t __SMLALD( - uint32_t x, - uint32_t y, - uint64_t sum) - { -/* return (sum + ((q15_t) (x >> 16) * (q15_t) (y >> 16)) + ((q15_t) x * (q15_t) y)); */ - return ((uint64_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) + - ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) + - ( ((q63_t)sum ) ) )); - } - - - /* - * @brief C custom defined SMLALDX for M3 and M0 processors - */ - static __INLINE uint64_t __SMLALDX( - uint32_t x, - uint32_t y, - uint64_t sum) - { -/* return (sum + ((q15_t) (x >> 16) * (q15_t) y)) + ((q15_t) x * (q15_t) (y >> 16)); */ - return ((uint64_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y ) >> 16)) + - ((((q31_t)x ) >> 16) * (((q31_t)y << 16) >> 16)) + - ( ((q63_t)sum ) ) )); - } - - - /* - * @brief C custom defined SMUAD for M3 and M0 processors - */ - static __INLINE uint32_t __SMUAD( - uint32_t x, - uint32_t y) - { - return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) + - ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) )); - } - - - /* - * @brief C custom defined SMUSD for M3 and M0 processors - */ - static __INLINE uint32_t __SMUSD( - uint32_t x, - uint32_t y) - { - return ((uint32_t)(((((q31_t)x << 16) >> 16) * (((q31_t)y << 16) >> 16)) - - ((((q31_t)x ) >> 16) * (((q31_t)y ) >> 16)) )); - } - - - /* - * @brief C custom defined SXTB16 for M3 and M0 processors - */ - static __INLINE uint32_t __SXTB16( - uint32_t x) - { - return ((uint32_t)(((((q31_t)x << 24) >> 24) & (q31_t)0x0000FFFF) | - ((((q31_t)x << 8) >> 8) & (q31_t)0xFFFF0000) )); - } - -#endif /* defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) */ - - - /** - * @brief Instance structure for the Q7 FIR filter. - */ - typedef struct - { - uint16_t numTaps; /**< number of filter coefficients in the filter. */ - q7_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - } arm_fir_instance_q7; - - /** - * @brief Instance structure for the Q15 FIR filter. - */ - typedef struct - { - uint16_t numTaps; /**< number of filter coefficients in the filter. */ - q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - } arm_fir_instance_q15; - - /** - * @brief Instance structure for the Q31 FIR filter. - */ - typedef struct - { - uint16_t numTaps; /**< number of filter coefficients in the filter. */ - q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ - } arm_fir_instance_q31; - - /** - * @brief Instance structure for the floating-point FIR filter. - */ - typedef struct - { - uint16_t numTaps; /**< number of filter coefficients in the filter. */ - float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ - } arm_fir_instance_f32; - - - /** - * @brief Processing function for the Q7 FIR filter. - * @param[in] S points to an instance of the Q7 FIR filter structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of samples to process. - */ - void arm_fir_q7( - const arm_fir_instance_q7 * S, - q7_t * pSrc, - q7_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the Q7 FIR filter. - * @param[in,out] S points to an instance of the Q7 FIR structure. - * @param[in] numTaps Number of filter coefficients in the filter. - * @param[in] pCoeffs points to the filter coefficients. - * @param[in] pState points to the state buffer. - * @param[in] blockSize number of samples that are processed. - */ - void arm_fir_init_q7( - arm_fir_instance_q7 * S, - uint16_t numTaps, - q7_t * pCoeffs, - q7_t * pState, - uint32_t blockSize); - - - /** - * @brief Processing function for the Q15 FIR filter. - * @param[in] S points to an instance of the Q15 FIR structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of samples to process. - */ - void arm_fir_q15( - const arm_fir_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Processing function for the fast Q15 FIR filter for Cortex-M3 and Cortex-M4. - * @param[in] S points to an instance of the Q15 FIR filter structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of samples to process. - */ - void arm_fir_fast_q15( - const arm_fir_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the Q15 FIR filter. - * @param[in,out] S points to an instance of the Q15 FIR filter structure. - * @param[in] numTaps Number of filter coefficients in the filter. Must be even and greater than or equal to 4. - * @param[in] pCoeffs points to the filter coefficients. - * @param[in] pState points to the state buffer. - * @param[in] blockSize number of samples that are processed at a time. - * @return The function returns ARM_MATH_SUCCESS if initialization was successful or ARM_MATH_ARGUMENT_ERROR if - * <code>numTaps</code> is not a supported value. - */ - arm_status arm_fir_init_q15( - arm_fir_instance_q15 * S, - uint16_t numTaps, - q15_t * pCoeffs, - q15_t * pState, - uint32_t blockSize); - - - /** - * @brief Processing function for the Q31 FIR filter. - * @param[in] S points to an instance of the Q31 FIR filter structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of samples to process. - */ - void arm_fir_q31( - const arm_fir_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Processing function for the fast Q31 FIR filter for Cortex-M3 and Cortex-M4. - * @param[in] S points to an instance of the Q31 FIR structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of samples to process. - */ - void arm_fir_fast_q31( - const arm_fir_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the Q31 FIR filter. - * @param[in,out] S points to an instance of the Q31 FIR structure. - * @param[in] numTaps Number of filter coefficients in the filter. - * @param[in] pCoeffs points to the filter coefficients. - * @param[in] pState points to the state buffer. - * @param[in] blockSize number of samples that are processed at a time. - */ - void arm_fir_init_q31( - arm_fir_instance_q31 * S, - uint16_t numTaps, - q31_t * pCoeffs, - q31_t * pState, - uint32_t blockSize); - - - /** - * @brief Processing function for the floating-point FIR filter. - * @param[in] S points to an instance of the floating-point FIR structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of samples to process. - */ - void arm_fir_f32( - const arm_fir_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the floating-point FIR filter. - * @param[in,out] S points to an instance of the floating-point FIR filter structure. - * @param[in] numTaps Number of filter coefficients in the filter. - * @param[in] pCoeffs points to the filter coefficients. - * @param[in] pState points to the state buffer. - * @param[in] blockSize number of samples that are processed at a time. - */ - void arm_fir_init_f32( - arm_fir_instance_f32 * S, - uint16_t numTaps, - float32_t * pCoeffs, - float32_t * pState, - uint32_t blockSize); - - - /** - * @brief Instance structure for the Q15 Biquad cascade filter. - */ - typedef struct - { - int8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ - q15_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ - q15_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ - int8_t postShift; /**< Additional shift, in bits, applied to each output sample. */ - } arm_biquad_casd_df1_inst_q15; - - /** - * @brief Instance structure for the Q31 Biquad cascade filter. - */ - typedef struct - { - uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ - q31_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ - q31_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ - uint8_t postShift; /**< Additional shift, in bits, applied to each output sample. */ - } arm_biquad_casd_df1_inst_q31; - - /** - * @brief Instance structure for the floating-point Biquad cascade filter. - */ - typedef struct - { - uint32_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ - float32_t *pState; /**< Points to the array of state coefficients. The array is of length 4*numStages. */ - float32_t *pCoeffs; /**< Points to the array of coefficients. The array is of length 5*numStages. */ - } arm_biquad_casd_df1_inst_f32; - - - /** - * @brief Processing function for the Q15 Biquad cascade filter. - * @param[in] S points to an instance of the Q15 Biquad cascade structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of samples to process. - */ - void arm_biquad_cascade_df1_q15( - const arm_biquad_casd_df1_inst_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the Q15 Biquad cascade filter. - * @param[in,out] S points to an instance of the Q15 Biquad cascade structure. - * @param[in] numStages number of 2nd order stages in the filter. - * @param[in] pCoeffs points to the filter coefficients. - * @param[in] pState points to the state buffer. - * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format - */ - void arm_biquad_cascade_df1_init_q15( - arm_biquad_casd_df1_inst_q15 * S, - uint8_t numStages, - q15_t * pCoeffs, - q15_t * pState, - int8_t postShift); - - - /** - * @brief Fast but less precise processing function for the Q15 Biquad cascade filter for Cortex-M3 and Cortex-M4. - * @param[in] S points to an instance of the Q15 Biquad cascade structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of samples to process. - */ - void arm_biquad_cascade_df1_fast_q15( - const arm_biquad_casd_df1_inst_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Processing function for the Q31 Biquad cascade filter - * @param[in] S points to an instance of the Q31 Biquad cascade structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of samples to process. - */ - void arm_biquad_cascade_df1_q31( - const arm_biquad_casd_df1_inst_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Fast but less precise processing function for the Q31 Biquad cascade filter for Cortex-M3 and Cortex-M4. - * @param[in] S points to an instance of the Q31 Biquad cascade structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of samples to process. - */ - void arm_biquad_cascade_df1_fast_q31( - const arm_biquad_casd_df1_inst_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the Q31 Biquad cascade filter. - * @param[in,out] S points to an instance of the Q31 Biquad cascade structure. - * @param[in] numStages number of 2nd order stages in the filter. - * @param[in] pCoeffs points to the filter coefficients. - * @param[in] pState points to the state buffer. - * @param[in] postShift Shift to be applied to the output. Varies according to the coefficients format - */ - void arm_biquad_cascade_df1_init_q31( - arm_biquad_casd_df1_inst_q31 * S, - uint8_t numStages, - q31_t * pCoeffs, - q31_t * pState, - int8_t postShift); - - - /** - * @brief Processing function for the floating-point Biquad cascade filter. - * @param[in] S points to an instance of the floating-point Biquad cascade structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of samples to process. - */ - void arm_biquad_cascade_df1_f32( - const arm_biquad_casd_df1_inst_f32 * S, - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the floating-point Biquad cascade filter. - * @param[in,out] S points to an instance of the floating-point Biquad cascade structure. - * @param[in] numStages number of 2nd order stages in the filter. - * @param[in] pCoeffs points to the filter coefficients. - * @param[in] pState points to the state buffer. - */ - void arm_biquad_cascade_df1_init_f32( - arm_biquad_casd_df1_inst_f32 * S, - uint8_t numStages, - float32_t * pCoeffs, - float32_t * pState); - - - /** - * @brief Instance structure for the floating-point matrix structure. - */ - typedef struct - { - uint16_t numRows; /**< number of rows of the matrix. */ - uint16_t numCols; /**< number of columns of the matrix. */ - float32_t *pData; /**< points to the data of the matrix. */ - } arm_matrix_instance_f32; - - - /** - * @brief Instance structure for the floating-point matrix structure. - */ - typedef struct - { - uint16_t numRows; /**< number of rows of the matrix. */ - uint16_t numCols; /**< number of columns of the matrix. */ - float64_t *pData; /**< points to the data of the matrix. */ - } arm_matrix_instance_f64; - - /** - * @brief Instance structure for the Q15 matrix structure. - */ - typedef struct - { - uint16_t numRows; /**< number of rows of the matrix. */ - uint16_t numCols; /**< number of columns of the matrix. */ - q15_t *pData; /**< points to the data of the matrix. */ - } arm_matrix_instance_q15; - - /** - * @brief Instance structure for the Q31 matrix structure. - */ - typedef struct - { - uint16_t numRows; /**< number of rows of the matrix. */ - uint16_t numCols; /**< number of columns of the matrix. */ - q31_t *pData; /**< points to the data of the matrix. */ - } arm_matrix_instance_q31; - - - /** - * @brief Floating-point matrix addition. - * @param[in] pSrcA points to the first input matrix structure - * @param[in] pSrcB points to the second input matrix structure - * @param[out] pDst points to output matrix structure - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_add_f32( - const arm_matrix_instance_f32 * pSrcA, - const arm_matrix_instance_f32 * pSrcB, - arm_matrix_instance_f32 * pDst); - - - /** - * @brief Q15 matrix addition. - * @param[in] pSrcA points to the first input matrix structure - * @param[in] pSrcB points to the second input matrix structure - * @param[out] pDst points to output matrix structure - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_add_q15( - const arm_matrix_instance_q15 * pSrcA, - const arm_matrix_instance_q15 * pSrcB, - arm_matrix_instance_q15 * pDst); - - - /** - * @brief Q31 matrix addition. - * @param[in] pSrcA points to the first input matrix structure - * @param[in] pSrcB points to the second input matrix structure - * @param[out] pDst points to output matrix structure - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_add_q31( - const arm_matrix_instance_q31 * pSrcA, - const arm_matrix_instance_q31 * pSrcB, - arm_matrix_instance_q31 * pDst); - - - /** - * @brief Floating-point, complex, matrix multiplication. - * @param[in] pSrcA points to the first input matrix structure - * @param[in] pSrcB points to the second input matrix structure - * @param[out] pDst points to output matrix structure - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_cmplx_mult_f32( - const arm_matrix_instance_f32 * pSrcA, - const arm_matrix_instance_f32 * pSrcB, - arm_matrix_instance_f32 * pDst); - - - /** - * @brief Q15, complex, matrix multiplication. - * @param[in] pSrcA points to the first input matrix structure - * @param[in] pSrcB points to the second input matrix structure - * @param[out] pDst points to output matrix structure - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_cmplx_mult_q15( - const arm_matrix_instance_q15 * pSrcA, - const arm_matrix_instance_q15 * pSrcB, - arm_matrix_instance_q15 * pDst, - q15_t * pScratch); - - - /** - * @brief Q31, complex, matrix multiplication. - * @param[in] pSrcA points to the first input matrix structure - * @param[in] pSrcB points to the second input matrix structure - * @param[out] pDst points to output matrix structure - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_cmplx_mult_q31( - const arm_matrix_instance_q31 * pSrcA, - const arm_matrix_instance_q31 * pSrcB, - arm_matrix_instance_q31 * pDst); - - - /** - * @brief Floating-point matrix transpose. - * @param[in] pSrc points to the input matrix - * @param[out] pDst points to the output matrix - * @return The function returns either <code>ARM_MATH_SIZE_MISMATCH</code> - * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_trans_f32( - const arm_matrix_instance_f32 * pSrc, - arm_matrix_instance_f32 * pDst); - - - /** - * @brief Q15 matrix transpose. - * @param[in] pSrc points to the input matrix - * @param[out] pDst points to the output matrix - * @return The function returns either <code>ARM_MATH_SIZE_MISMATCH</code> - * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_trans_q15( - const arm_matrix_instance_q15 * pSrc, - arm_matrix_instance_q15 * pDst); - - - /** - * @brief Q31 matrix transpose. - * @param[in] pSrc points to the input matrix - * @param[out] pDst points to the output matrix - * @return The function returns either <code>ARM_MATH_SIZE_MISMATCH</code> - * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_trans_q31( - const arm_matrix_instance_q31 * pSrc, - arm_matrix_instance_q31 * pDst); - - - /** - * @brief Floating-point matrix multiplication - * @param[in] pSrcA points to the first input matrix structure - * @param[in] pSrcB points to the second input matrix structure - * @param[out] pDst points to output matrix structure - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_mult_f32( - const arm_matrix_instance_f32 * pSrcA, - const arm_matrix_instance_f32 * pSrcB, - arm_matrix_instance_f32 * pDst); - - - /** - * @brief Q15 matrix multiplication - * @param[in] pSrcA points to the first input matrix structure - * @param[in] pSrcB points to the second input matrix structure - * @param[out] pDst points to output matrix structure - * @param[in] pState points to the array for storing intermediate results - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_mult_q15( - const arm_matrix_instance_q15 * pSrcA, - const arm_matrix_instance_q15 * pSrcB, - arm_matrix_instance_q15 * pDst, - q15_t * pState); - - - /** - * @brief Q15 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4 - * @param[in] pSrcA points to the first input matrix structure - * @param[in] pSrcB points to the second input matrix structure - * @param[out] pDst points to output matrix structure - * @param[in] pState points to the array for storing intermediate results - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_mult_fast_q15( - const arm_matrix_instance_q15 * pSrcA, - const arm_matrix_instance_q15 * pSrcB, - arm_matrix_instance_q15 * pDst, - q15_t * pState); - - - /** - * @brief Q31 matrix multiplication - * @param[in] pSrcA points to the first input matrix structure - * @param[in] pSrcB points to the second input matrix structure - * @param[out] pDst points to output matrix structure - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_mult_q31( - const arm_matrix_instance_q31 * pSrcA, - const arm_matrix_instance_q31 * pSrcB, - arm_matrix_instance_q31 * pDst); - - - /** - * @brief Q31 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4 - * @param[in] pSrcA points to the first input matrix structure - * @param[in] pSrcB points to the second input matrix structure - * @param[out] pDst points to output matrix structure - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_mult_fast_q31( - const arm_matrix_instance_q31 * pSrcA, - const arm_matrix_instance_q31 * pSrcB, - arm_matrix_instance_q31 * pDst); - - - /** - * @brief Floating-point matrix subtraction - * @param[in] pSrcA points to the first input matrix structure - * @param[in] pSrcB points to the second input matrix structure - * @param[out] pDst points to output matrix structure - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_sub_f32( - const arm_matrix_instance_f32 * pSrcA, - const arm_matrix_instance_f32 * pSrcB, - arm_matrix_instance_f32 * pDst); - - - /** - * @brief Q15 matrix subtraction - * @param[in] pSrcA points to the first input matrix structure - * @param[in] pSrcB points to the second input matrix structure - * @param[out] pDst points to output matrix structure - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_sub_q15( - const arm_matrix_instance_q15 * pSrcA, - const arm_matrix_instance_q15 * pSrcB, - arm_matrix_instance_q15 * pDst); - - - /** - * @brief Q31 matrix subtraction - * @param[in] pSrcA points to the first input matrix structure - * @param[in] pSrcB points to the second input matrix structure - * @param[out] pDst points to output matrix structure - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_sub_q31( - const arm_matrix_instance_q31 * pSrcA, - const arm_matrix_instance_q31 * pSrcB, - arm_matrix_instance_q31 * pDst); - - - /** - * @brief Floating-point matrix scaling. - * @param[in] pSrc points to the input matrix - * @param[in] scale scale factor - * @param[out] pDst points to the output matrix - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_scale_f32( - const arm_matrix_instance_f32 * pSrc, - float32_t scale, - arm_matrix_instance_f32 * pDst); - - - /** - * @brief Q15 matrix scaling. - * @param[in] pSrc points to input matrix - * @param[in] scaleFract fractional portion of the scale factor - * @param[in] shift number of bits to shift the result by - * @param[out] pDst points to output matrix - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_scale_q15( - const arm_matrix_instance_q15 * pSrc, - q15_t scaleFract, - int32_t shift, - arm_matrix_instance_q15 * pDst); - - - /** - * @brief Q31 matrix scaling. - * @param[in] pSrc points to input matrix - * @param[in] scaleFract fractional portion of the scale factor - * @param[in] shift number of bits to shift the result by - * @param[out] pDst points to output matrix structure - * @return The function returns either - * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking. - */ - arm_status arm_mat_scale_q31( - const arm_matrix_instance_q31 * pSrc, - q31_t scaleFract, - int32_t shift, - arm_matrix_instance_q31 * pDst); - - - /** - * @brief Q31 matrix initialization. - * @param[in,out] S points to an instance of the floating-point matrix structure. - * @param[in] nRows number of rows in the matrix. - * @param[in] nColumns number of columns in the matrix. - * @param[in] pData points to the matrix data array. - */ - void arm_mat_init_q31( - arm_matrix_instance_q31 * S, - uint16_t nRows, - uint16_t nColumns, - q31_t * pData); - - - /** - * @brief Q15 matrix initialization. - * @param[in,out] S points to an instance of the floating-point matrix structure. - * @param[in] nRows number of rows in the matrix. - * @param[in] nColumns number of columns in the matrix. - * @param[in] pData points to the matrix data array. - */ - void arm_mat_init_q15( - arm_matrix_instance_q15 * S, - uint16_t nRows, - uint16_t nColumns, - q15_t * pData); - - - /** - * @brief Floating-point matrix initialization. - * @param[in,out] S points to an instance of the floating-point matrix structure. - * @param[in] nRows number of rows in the matrix. - * @param[in] nColumns number of columns in the matrix. - * @param[in] pData points to the matrix data array. - */ - void arm_mat_init_f32( - arm_matrix_instance_f32 * S, - uint16_t nRows, - uint16_t nColumns, - float32_t * pData); - - - - /** - * @brief Instance structure for the Q15 PID Control. - */ - typedef struct - { - q15_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ -#ifdef ARM_MATH_CM0_FAMILY - q15_t A1; - q15_t A2; -#else - q31_t A1; /**< The derived gain A1 = -Kp - 2Kd | Kd.*/ -#endif - q15_t state[3]; /**< The state array of length 3. */ - q15_t Kp; /**< The proportional gain. */ - q15_t Ki; /**< The integral gain. */ - q15_t Kd; /**< The derivative gain. */ - } arm_pid_instance_q15; - - /** - * @brief Instance structure for the Q31 PID Control. - */ - typedef struct - { - q31_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ - q31_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */ - q31_t A2; /**< The derived gain, A2 = Kd . */ - q31_t state[3]; /**< The state array of length 3. */ - q31_t Kp; /**< The proportional gain. */ - q31_t Ki; /**< The integral gain. */ - q31_t Kd; /**< The derivative gain. */ - } arm_pid_instance_q31; - - /** - * @brief Instance structure for the floating-point PID Control. - */ - typedef struct - { - float32_t A0; /**< The derived gain, A0 = Kp + Ki + Kd . */ - float32_t A1; /**< The derived gain, A1 = -Kp - 2Kd. */ - float32_t A2; /**< The derived gain, A2 = Kd . */ - float32_t state[3]; /**< The state array of length 3. */ - float32_t Kp; /**< The proportional gain. */ - float32_t Ki; /**< The integral gain. */ - float32_t Kd; /**< The derivative gain. */ - } arm_pid_instance_f32; - - - - /** - * @brief Initialization function for the floating-point PID Control. - * @param[in,out] S points to an instance of the PID structure. - * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state. - */ - void arm_pid_init_f32( - arm_pid_instance_f32 * S, - int32_t resetStateFlag); - - - /** - * @brief Reset function for the floating-point PID Control. - * @param[in,out] S is an instance of the floating-point PID Control structure - */ - void arm_pid_reset_f32( - arm_pid_instance_f32 * S); - - - /** - * @brief Initialization function for the Q31 PID Control. - * @param[in,out] S points to an instance of the Q15 PID structure. - * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state. - */ - void arm_pid_init_q31( - arm_pid_instance_q31 * S, - int32_t resetStateFlag); - - - /** - * @brief Reset function for the Q31 PID Control. - * @param[in,out] S points to an instance of the Q31 PID Control structure - */ - - void arm_pid_reset_q31( - arm_pid_instance_q31 * S); - - - /** - * @brief Initialization function for the Q15 PID Control. - * @param[in,out] S points to an instance of the Q15 PID structure. - * @param[in] resetStateFlag flag to reset the state. 0 = no change in state 1 = reset the state. - */ - void arm_pid_init_q15( - arm_pid_instance_q15 * S, - int32_t resetStateFlag); - - - /** - * @brief Reset function for the Q15 PID Control. - * @param[in,out] S points to an instance of the q15 PID Control structure - */ - void arm_pid_reset_q15( - arm_pid_instance_q15 * S); - - - /** - * @brief Instance structure for the floating-point Linear Interpolate function. - */ - typedef struct - { - uint32_t nValues; /**< nValues */ - float32_t x1; /**< x1 */ - float32_t xSpacing; /**< xSpacing */ - float32_t *pYData; /**< pointer to the table of Y values */ - } arm_linear_interp_instance_f32; - - /** - * @brief Instance structure for the floating-point bilinear interpolation function. - */ - typedef struct - { - uint16_t numRows; /**< number of rows in the data table. */ - uint16_t numCols; /**< number of columns in the data table. */ - float32_t *pData; /**< points to the data table. */ - } arm_bilinear_interp_instance_f32; - - /** - * @brief Instance structure for the Q31 bilinear interpolation function. - */ - typedef struct - { - uint16_t numRows; /**< number of rows in the data table. */ - uint16_t numCols; /**< number of columns in the data table. */ - q31_t *pData; /**< points to the data table. */ - } arm_bilinear_interp_instance_q31; - - /** - * @brief Instance structure for the Q15 bilinear interpolation function. - */ - typedef struct - { - uint16_t numRows; /**< number of rows in the data table. */ - uint16_t numCols; /**< number of columns in the data table. */ - q15_t *pData; /**< points to the data table. */ - } arm_bilinear_interp_instance_q15; - - /** - * @brief Instance structure for the Q15 bilinear interpolation function. - */ - typedef struct - { - uint16_t numRows; /**< number of rows in the data table. */ - uint16_t numCols; /**< number of columns in the data table. */ - q7_t *pData; /**< points to the data table. */ - } arm_bilinear_interp_instance_q7; - - - /** - * @brief Q7 vector multiplication. - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in each vector - */ - void arm_mult_q7( - q7_t * pSrcA, - q7_t * pSrcB, - q7_t * pDst, - uint32_t blockSize); - - - /** - * @brief Q15 vector multiplication. - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in each vector - */ - void arm_mult_q15( - q15_t * pSrcA, - q15_t * pSrcB, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Q31 vector multiplication. - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in each vector - */ - void arm_mult_q31( - q31_t * pSrcA, - q31_t * pSrcB, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Floating-point vector multiplication. - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in each vector - */ - void arm_mult_f32( - float32_t * pSrcA, - float32_t * pSrcB, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Instance structure for the Q15 CFFT/CIFFT function. - */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ - uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ - q15_t *pTwiddle; /**< points to the Sin twiddle factor table. */ - uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ - } arm_cfft_radix2_instance_q15; - -/* Deprecated */ - arm_status arm_cfft_radix2_init_q15( - arm_cfft_radix2_instance_q15 * S, - uint16_t fftLen, - uint8_t ifftFlag, - uint8_t bitReverseFlag); - -/* Deprecated */ - void arm_cfft_radix2_q15( - const arm_cfft_radix2_instance_q15 * S, - q15_t * pSrc); - - - /** - * @brief Instance structure for the Q15 CFFT/CIFFT function. - */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ - uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ - q15_t *pTwiddle; /**< points to the twiddle factor table. */ - uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ - } arm_cfft_radix4_instance_q15; - -/* Deprecated */ - arm_status arm_cfft_radix4_init_q15( - arm_cfft_radix4_instance_q15 * S, - uint16_t fftLen, - uint8_t ifftFlag, - uint8_t bitReverseFlag); - -/* Deprecated */ - void arm_cfft_radix4_q15( - const arm_cfft_radix4_instance_q15 * S, - q15_t * pSrc); - - /** - * @brief Instance structure for the Radix-2 Q31 CFFT/CIFFT function. - */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ - uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ - q31_t *pTwiddle; /**< points to the Twiddle factor table. */ - uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ - } arm_cfft_radix2_instance_q31; - -/* Deprecated */ - arm_status arm_cfft_radix2_init_q31( - arm_cfft_radix2_instance_q31 * S, - uint16_t fftLen, - uint8_t ifftFlag, - uint8_t bitReverseFlag); - -/* Deprecated */ - void arm_cfft_radix2_q31( - const arm_cfft_radix2_instance_q31 * S, - q31_t * pSrc); - - /** - * @brief Instance structure for the Q31 CFFT/CIFFT function. - */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ - uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ - q31_t *pTwiddle; /**< points to the twiddle factor table. */ - uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ - } arm_cfft_radix4_instance_q31; - -/* Deprecated */ - void arm_cfft_radix4_q31( - const arm_cfft_radix4_instance_q31 * S, - q31_t * pSrc); - -/* Deprecated */ - arm_status arm_cfft_radix4_init_q31( - arm_cfft_radix4_instance_q31 * S, - uint16_t fftLen, - uint8_t ifftFlag, - uint8_t bitReverseFlag); - - /** - * @brief Instance structure for the floating-point CFFT/CIFFT function. - */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ - uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ - float32_t *pTwiddle; /**< points to the Twiddle factor table. */ - uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ - float32_t onebyfftLen; /**< value of 1/fftLen. */ - } arm_cfft_radix2_instance_f32; - -/* Deprecated */ - arm_status arm_cfft_radix2_init_f32( - arm_cfft_radix2_instance_f32 * S, - uint16_t fftLen, - uint8_t ifftFlag, - uint8_t bitReverseFlag); - -/* Deprecated */ - void arm_cfft_radix2_f32( - const arm_cfft_radix2_instance_f32 * S, - float32_t * pSrc); - - /** - * @brief Instance structure for the floating-point CFFT/CIFFT function. - */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - uint8_t ifftFlag; /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */ - uint8_t bitReverseFlag; /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */ - float32_t *pTwiddle; /**< points to the Twiddle factor table. */ - uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t twidCoefModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - uint16_t bitRevFactor; /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */ - float32_t onebyfftLen; /**< value of 1/fftLen. */ - } arm_cfft_radix4_instance_f32; - -/* Deprecated */ - arm_status arm_cfft_radix4_init_f32( - arm_cfft_radix4_instance_f32 * S, - uint16_t fftLen, - uint8_t ifftFlag, - uint8_t bitReverseFlag); - -/* Deprecated */ - void arm_cfft_radix4_f32( - const arm_cfft_radix4_instance_f32 * S, - float32_t * pSrc); - - /** - * @brief Instance structure for the fixed-point CFFT/CIFFT function. - */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - const q15_t *pTwiddle; /**< points to the Twiddle factor table. */ - const uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t bitRevLength; /**< bit reversal table length. */ - } arm_cfft_instance_q15; - -void arm_cfft_q15( - const arm_cfft_instance_q15 * S, - q15_t * p1, - uint8_t ifftFlag, - uint8_t bitReverseFlag); - - /** - * @brief Instance structure for the fixed-point CFFT/CIFFT function. - */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - const q31_t *pTwiddle; /**< points to the Twiddle factor table. */ - const uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t bitRevLength; /**< bit reversal table length. */ - } arm_cfft_instance_q31; - -void arm_cfft_q31( - const arm_cfft_instance_q31 * S, - q31_t * p1, - uint8_t ifftFlag, - uint8_t bitReverseFlag); - - /** - * @brief Instance structure for the floating-point CFFT/CIFFT function. - */ - typedef struct - { - uint16_t fftLen; /**< length of the FFT. */ - const float32_t *pTwiddle; /**< points to the Twiddle factor table. */ - const uint16_t *pBitRevTable; /**< points to the bit reversal table. */ - uint16_t bitRevLength; /**< bit reversal table length. */ - } arm_cfft_instance_f32; - - void arm_cfft_f32( - const arm_cfft_instance_f32 * S, - float32_t * p1, - uint8_t ifftFlag, - uint8_t bitReverseFlag); - - /** - * @brief Instance structure for the Q15 RFFT/RIFFT function. - */ - typedef struct - { - uint32_t fftLenReal; /**< length of the real FFT. */ - uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ - uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ - uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - q15_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ - q15_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ - const arm_cfft_instance_q15 *pCfft; /**< points to the complex FFT instance. */ - } arm_rfft_instance_q15; - - arm_status arm_rfft_init_q15( - arm_rfft_instance_q15 * S, - uint32_t fftLenReal, - uint32_t ifftFlagR, - uint32_t bitReverseFlag); - - void arm_rfft_q15( - const arm_rfft_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst); - - /** - * @brief Instance structure for the Q31 RFFT/RIFFT function. - */ - typedef struct - { - uint32_t fftLenReal; /**< length of the real FFT. */ - uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ - uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ - uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - q31_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ - q31_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ - const arm_cfft_instance_q31 *pCfft; /**< points to the complex FFT instance. */ - } arm_rfft_instance_q31; - - arm_status arm_rfft_init_q31( - arm_rfft_instance_q31 * S, - uint32_t fftLenReal, - uint32_t ifftFlagR, - uint32_t bitReverseFlag); - - void arm_rfft_q31( - const arm_rfft_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst); - - /** - * @brief Instance structure for the floating-point RFFT/RIFFT function. - */ - typedef struct - { - uint32_t fftLenReal; /**< length of the real FFT. */ - uint16_t fftLenBy2; /**< length of the complex FFT. */ - uint8_t ifftFlagR; /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */ - uint8_t bitReverseFlagR; /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */ - uint32_t twidCoefRModifier; /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */ - float32_t *pTwiddleAReal; /**< points to the real twiddle factor table. */ - float32_t *pTwiddleBReal; /**< points to the imag twiddle factor table. */ - arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */ - } arm_rfft_instance_f32; - - arm_status arm_rfft_init_f32( - arm_rfft_instance_f32 * S, - arm_cfft_radix4_instance_f32 * S_CFFT, - uint32_t fftLenReal, - uint32_t ifftFlagR, - uint32_t bitReverseFlag); - - void arm_rfft_f32( - const arm_rfft_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst); - - /** - * @brief Instance structure for the floating-point RFFT/RIFFT function. - */ -typedef struct - { - arm_cfft_instance_f32 Sint; /**< Internal CFFT structure. */ - uint16_t fftLenRFFT; /**< length of the real sequence */ - float32_t * pTwiddleRFFT; /**< Twiddle factors real stage */ - } arm_rfft_fast_instance_f32 ; - -arm_status arm_rfft_fast_init_f32 ( - arm_rfft_fast_instance_f32 * S, - uint16_t fftLen); - -void arm_rfft_fast_f32( - arm_rfft_fast_instance_f32 * S, - float32_t * p, float32_t * pOut, - uint8_t ifftFlag); - - /** - * @brief Instance structure for the floating-point DCT4/IDCT4 function. - */ - typedef struct - { - uint16_t N; /**< length of the DCT4. */ - uint16_t Nby2; /**< half of the length of the DCT4. */ - float32_t normalize; /**< normalizing factor. */ - float32_t *pTwiddle; /**< points to the twiddle factor table. */ - float32_t *pCosFactor; /**< points to the cosFactor table. */ - arm_rfft_instance_f32 *pRfft; /**< points to the real FFT instance. */ - arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */ - } arm_dct4_instance_f32; - - - /** - * @brief Initialization function for the floating-point DCT4/IDCT4. - * @param[in,out] S points to an instance of floating-point DCT4/IDCT4 structure. - * @param[in] S_RFFT points to an instance of floating-point RFFT/RIFFT structure. - * @param[in] S_CFFT points to an instance of floating-point CFFT/CIFFT structure. - * @param[in] N length of the DCT4. - * @param[in] Nby2 half of the length of the DCT4. - * @param[in] normalize normalizing factor. - * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>fftLenReal</code> is not a supported transform length. - */ - arm_status arm_dct4_init_f32( - arm_dct4_instance_f32 * S, - arm_rfft_instance_f32 * S_RFFT, - arm_cfft_radix4_instance_f32 * S_CFFT, - uint16_t N, - uint16_t Nby2, - float32_t normalize); - - - /** - * @brief Processing function for the floating-point DCT4/IDCT4. - * @param[in] S points to an instance of the floating-point DCT4/IDCT4 structure. - * @param[in] pState points to state buffer. - * @param[in,out] pInlineBuffer points to the in-place input and output buffer. - */ - void arm_dct4_f32( - const arm_dct4_instance_f32 * S, - float32_t * pState, - float32_t * pInlineBuffer); - - - /** - * @brief Instance structure for the Q31 DCT4/IDCT4 function. - */ - typedef struct - { - uint16_t N; /**< length of the DCT4. */ - uint16_t Nby2; /**< half of the length of the DCT4. */ - q31_t normalize; /**< normalizing factor. */ - q31_t *pTwiddle; /**< points to the twiddle factor table. */ - q31_t *pCosFactor; /**< points to the cosFactor table. */ - arm_rfft_instance_q31 *pRfft; /**< points to the real FFT instance. */ - arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */ - } arm_dct4_instance_q31; - - - /** - * @brief Initialization function for the Q31 DCT4/IDCT4. - * @param[in,out] S points to an instance of Q31 DCT4/IDCT4 structure. - * @param[in] S_RFFT points to an instance of Q31 RFFT/RIFFT structure - * @param[in] S_CFFT points to an instance of Q31 CFFT/CIFFT structure - * @param[in] N length of the DCT4. - * @param[in] Nby2 half of the length of the DCT4. - * @param[in] normalize normalizing factor. - * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>N</code> is not a supported transform length. - */ - arm_status arm_dct4_init_q31( - arm_dct4_instance_q31 * S, - arm_rfft_instance_q31 * S_RFFT, - arm_cfft_radix4_instance_q31 * S_CFFT, - uint16_t N, - uint16_t Nby2, - q31_t normalize); - - - /** - * @brief Processing function for the Q31 DCT4/IDCT4. - * @param[in] S points to an instance of the Q31 DCT4 structure. - * @param[in] pState points to state buffer. - * @param[in,out] pInlineBuffer points to the in-place input and output buffer. - */ - void arm_dct4_q31( - const arm_dct4_instance_q31 * S, - q31_t * pState, - q31_t * pInlineBuffer); - - - /** - * @brief Instance structure for the Q15 DCT4/IDCT4 function. - */ - typedef struct - { - uint16_t N; /**< length of the DCT4. */ - uint16_t Nby2; /**< half of the length of the DCT4. */ - q15_t normalize; /**< normalizing factor. */ - q15_t *pTwiddle; /**< points to the twiddle factor table. */ - q15_t *pCosFactor; /**< points to the cosFactor table. */ - arm_rfft_instance_q15 *pRfft; /**< points to the real FFT instance. */ - arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */ - } arm_dct4_instance_q15; - - - /** - * @brief Initialization function for the Q15 DCT4/IDCT4. - * @param[in,out] S points to an instance of Q15 DCT4/IDCT4 structure. - * @param[in] S_RFFT points to an instance of Q15 RFFT/RIFFT structure. - * @param[in] S_CFFT points to an instance of Q15 CFFT/CIFFT structure. - * @param[in] N length of the DCT4. - * @param[in] Nby2 half of the length of the DCT4. - * @param[in] normalize normalizing factor. - * @return arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>N</code> is not a supported transform length. - */ - arm_status arm_dct4_init_q15( - arm_dct4_instance_q15 * S, - arm_rfft_instance_q15 * S_RFFT, - arm_cfft_radix4_instance_q15 * S_CFFT, - uint16_t N, - uint16_t Nby2, - q15_t normalize); - - - /** - * @brief Processing function for the Q15 DCT4/IDCT4. - * @param[in] S points to an instance of the Q15 DCT4 structure. - * @param[in] pState points to state buffer. - * @param[in,out] pInlineBuffer points to the in-place input and output buffer. - */ - void arm_dct4_q15( - const arm_dct4_instance_q15 * S, - q15_t * pState, - q15_t * pInlineBuffer); - - - /** - * @brief Floating-point vector addition. - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in each vector - */ - void arm_add_f32( - float32_t * pSrcA, - float32_t * pSrcB, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Q7 vector addition. - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in each vector - */ - void arm_add_q7( - q7_t * pSrcA, - q7_t * pSrcB, - q7_t * pDst, - uint32_t blockSize); - - - /** - * @brief Q15 vector addition. - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in each vector - */ - void arm_add_q15( - q15_t * pSrcA, - q15_t * pSrcB, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Q31 vector addition. - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in each vector - */ - void arm_add_q31( - q31_t * pSrcA, - q31_t * pSrcB, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Floating-point vector subtraction. - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in each vector - */ - void arm_sub_f32( - float32_t * pSrcA, - float32_t * pSrcB, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Q7 vector subtraction. - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in each vector - */ - void arm_sub_q7( - q7_t * pSrcA, - q7_t * pSrcB, - q7_t * pDst, - uint32_t blockSize); - - - /** - * @brief Q15 vector subtraction. - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in each vector - */ - void arm_sub_q15( - q15_t * pSrcA, - q15_t * pSrcB, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Q31 vector subtraction. - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in each vector - */ - void arm_sub_q31( - q31_t * pSrcA, - q31_t * pSrcB, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Multiplies a floating-point vector by a scalar. - * @param[in] pSrc points to the input vector - * @param[in] scale scale factor to be applied - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in the vector - */ - void arm_scale_f32( - float32_t * pSrc, - float32_t scale, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Multiplies a Q7 vector by a scalar. - * @param[in] pSrc points to the input vector - * @param[in] scaleFract fractional portion of the scale value - * @param[in] shift number of bits to shift the result by - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in the vector - */ - void arm_scale_q7( - q7_t * pSrc, - q7_t scaleFract, - int8_t shift, - q7_t * pDst, - uint32_t blockSize); - - - /** - * @brief Multiplies a Q15 vector by a scalar. - * @param[in] pSrc points to the input vector - * @param[in] scaleFract fractional portion of the scale value - * @param[in] shift number of bits to shift the result by - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in the vector - */ - void arm_scale_q15( - q15_t * pSrc, - q15_t scaleFract, - int8_t shift, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Multiplies a Q31 vector by a scalar. - * @param[in] pSrc points to the input vector - * @param[in] scaleFract fractional portion of the scale value - * @param[in] shift number of bits to shift the result by - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in the vector - */ - void arm_scale_q31( - q31_t * pSrc, - q31_t scaleFract, - int8_t shift, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Q7 vector absolute value. - * @param[in] pSrc points to the input buffer - * @param[out] pDst points to the output buffer - * @param[in] blockSize number of samples in each vector - */ - void arm_abs_q7( - q7_t * pSrc, - q7_t * pDst, - uint32_t blockSize); - - - /** - * @brief Floating-point vector absolute value. - * @param[in] pSrc points to the input buffer - * @param[out] pDst points to the output buffer - * @param[in] blockSize number of samples in each vector - */ - void arm_abs_f32( - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Q15 vector absolute value. - * @param[in] pSrc points to the input buffer - * @param[out] pDst points to the output buffer - * @param[in] blockSize number of samples in each vector - */ - void arm_abs_q15( - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Q31 vector absolute value. - * @param[in] pSrc points to the input buffer - * @param[out] pDst points to the output buffer - * @param[in] blockSize number of samples in each vector - */ - void arm_abs_q31( - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Dot product of floating-point vectors. - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[in] blockSize number of samples in each vector - * @param[out] result output result returned here - */ - void arm_dot_prod_f32( - float32_t * pSrcA, - float32_t * pSrcB, - uint32_t blockSize, - float32_t * result); - - - /** - * @brief Dot product of Q7 vectors. - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[in] blockSize number of samples in each vector - * @param[out] result output result returned here - */ - void arm_dot_prod_q7( - q7_t * pSrcA, - q7_t * pSrcB, - uint32_t blockSize, - q31_t * result); - - - /** - * @brief Dot product of Q15 vectors. - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[in] blockSize number of samples in each vector - * @param[out] result output result returned here - */ - void arm_dot_prod_q15( - q15_t * pSrcA, - q15_t * pSrcB, - uint32_t blockSize, - q63_t * result); - - - /** - * @brief Dot product of Q31 vectors. - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[in] blockSize number of samples in each vector - * @param[out] result output result returned here - */ - void arm_dot_prod_q31( - q31_t * pSrcA, - q31_t * pSrcB, - uint32_t blockSize, - q63_t * result); - - - /** - * @brief Shifts the elements of a Q7 vector a specified number of bits. - * @param[in] pSrc points to the input vector - * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right. - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in the vector - */ - void arm_shift_q7( - q7_t * pSrc, - int8_t shiftBits, - q7_t * pDst, - uint32_t blockSize); - - - /** - * @brief Shifts the elements of a Q15 vector a specified number of bits. - * @param[in] pSrc points to the input vector - * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right. - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in the vector - */ - void arm_shift_q15( - q15_t * pSrc, - int8_t shiftBits, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Shifts the elements of a Q31 vector a specified number of bits. - * @param[in] pSrc points to the input vector - * @param[in] shiftBits number of bits to shift. A positive value shifts left; a negative value shifts right. - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in the vector - */ - void arm_shift_q31( - q31_t * pSrc, - int8_t shiftBits, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Adds a constant offset to a floating-point vector. - * @param[in] pSrc points to the input vector - * @param[in] offset is the offset to be added - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in the vector - */ - void arm_offset_f32( - float32_t * pSrc, - float32_t offset, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Adds a constant offset to a Q7 vector. - * @param[in] pSrc points to the input vector - * @param[in] offset is the offset to be added - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in the vector - */ - void arm_offset_q7( - q7_t * pSrc, - q7_t offset, - q7_t * pDst, - uint32_t blockSize); - - - /** - * @brief Adds a constant offset to a Q15 vector. - * @param[in] pSrc points to the input vector - * @param[in] offset is the offset to be added - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in the vector - */ - void arm_offset_q15( - q15_t * pSrc, - q15_t offset, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Adds a constant offset to a Q31 vector. - * @param[in] pSrc points to the input vector - * @param[in] offset is the offset to be added - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in the vector - */ - void arm_offset_q31( - q31_t * pSrc, - q31_t offset, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Negates the elements of a floating-point vector. - * @param[in] pSrc points to the input vector - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in the vector - */ - void arm_negate_f32( - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Negates the elements of a Q7 vector. - * @param[in] pSrc points to the input vector - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in the vector - */ - void arm_negate_q7( - q7_t * pSrc, - q7_t * pDst, - uint32_t blockSize); - - - /** - * @brief Negates the elements of a Q15 vector. - * @param[in] pSrc points to the input vector - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in the vector - */ - void arm_negate_q15( - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Negates the elements of a Q31 vector. - * @param[in] pSrc points to the input vector - * @param[out] pDst points to the output vector - * @param[in] blockSize number of samples in the vector - */ - void arm_negate_q31( - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Copies the elements of a floating-point vector. - * @param[in] pSrc input pointer - * @param[out] pDst output pointer - * @param[in] blockSize number of samples to process - */ - void arm_copy_f32( - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Copies the elements of a Q7 vector. - * @param[in] pSrc input pointer - * @param[out] pDst output pointer - * @param[in] blockSize number of samples to process - */ - void arm_copy_q7( - q7_t * pSrc, - q7_t * pDst, - uint32_t blockSize); - - - /** - * @brief Copies the elements of a Q15 vector. - * @param[in] pSrc input pointer - * @param[out] pDst output pointer - * @param[in] blockSize number of samples to process - */ - void arm_copy_q15( - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Copies the elements of a Q31 vector. - * @param[in] pSrc input pointer - * @param[out] pDst output pointer - * @param[in] blockSize number of samples to process - */ - void arm_copy_q31( - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Fills a constant value into a floating-point vector. - * @param[in] value input value to be filled - * @param[out] pDst output pointer - * @param[in] blockSize number of samples to process - */ - void arm_fill_f32( - float32_t value, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Fills a constant value into a Q7 vector. - * @param[in] value input value to be filled - * @param[out] pDst output pointer - * @param[in] blockSize number of samples to process - */ - void arm_fill_q7( - q7_t value, - q7_t * pDst, - uint32_t blockSize); - - - /** - * @brief Fills a constant value into a Q15 vector. - * @param[in] value input value to be filled - * @param[out] pDst output pointer - * @param[in] blockSize number of samples to process - */ - void arm_fill_q15( - q15_t value, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Fills a constant value into a Q31 vector. - * @param[in] value input value to be filled - * @param[out] pDst output pointer - * @param[in] blockSize number of samples to process - */ - void arm_fill_q31( - q31_t value, - q31_t * pDst, - uint32_t blockSize); - - -/** - * @brief Convolution of floating-point sequences. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the location where the output result is written. Length srcALen+srcBLen-1. - */ - void arm_conv_f32( - float32_t * pSrcA, - uint32_t srcALen, - float32_t * pSrcB, - uint32_t srcBLen, - float32_t * pDst); - - - /** - * @brief Convolution of Q15 sequences. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1. - * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. - * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen). - */ - void arm_conv_opt_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst, - q15_t * pScratch1, - q15_t * pScratch2); - - -/** - * @brief Convolution of Q15 sequences. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the location where the output result is written. Length srcALen+srcBLen-1. - */ - void arm_conv_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst); - - - /** - * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1. - */ - void arm_conv_fast_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst); - - - /** - * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1. - * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. - * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen). - */ - void arm_conv_fast_opt_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst, - q15_t * pScratch1, - q15_t * pScratch2); - - - /** - * @brief Convolution of Q31 sequences. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1. - */ - void arm_conv_q31( - q31_t * pSrcA, - uint32_t srcALen, - q31_t * pSrcB, - uint32_t srcBLen, - q31_t * pDst); - - - /** - * @brief Convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4 - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1. - */ - void arm_conv_fast_q31( - q31_t * pSrcA, - uint32_t srcALen, - q31_t * pSrcB, - uint32_t srcBLen, - q31_t * pDst); - - - /** - * @brief Convolution of Q7 sequences. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1. - * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. - * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen). - */ - void arm_conv_opt_q7( - q7_t * pSrcA, - uint32_t srcALen, - q7_t * pSrcB, - uint32_t srcBLen, - q7_t * pDst, - q15_t * pScratch1, - q15_t * pScratch2); - - - /** - * @brief Convolution of Q7 sequences. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data Length srcALen+srcBLen-1. - */ - void arm_conv_q7( - q7_t * pSrcA, - uint32_t srcALen, - q7_t * pSrcB, - uint32_t srcBLen, - q7_t * pDst); - - - /** - * @brief Partial convolution of floating-point sequences. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data - * @param[in] firstIndex is the first output sample to start with. - * @param[in] numPoints is the number of output points to be computed. - * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. - */ - arm_status arm_conv_partial_f32( - float32_t * pSrcA, - uint32_t srcALen, - float32_t * pSrcB, - uint32_t srcBLen, - float32_t * pDst, - uint32_t firstIndex, - uint32_t numPoints); - - - /** - * @brief Partial convolution of Q15 sequences. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data - * @param[in] firstIndex is the first output sample to start with. - * @param[in] numPoints is the number of output points to be computed. - * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. - * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen). - * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. - */ - arm_status arm_conv_partial_opt_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst, - uint32_t firstIndex, - uint32_t numPoints, - q15_t * pScratch1, - q15_t * pScratch2); - - - /** - * @brief Partial convolution of Q15 sequences. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data - * @param[in] firstIndex is the first output sample to start with. - * @param[in] numPoints is the number of output points to be computed. - * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. - */ - arm_status arm_conv_partial_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst, - uint32_t firstIndex, - uint32_t numPoints); - - - /** - * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data - * @param[in] firstIndex is the first output sample to start with. - * @param[in] numPoints is the number of output points to be computed. - * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. - */ - arm_status arm_conv_partial_fast_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst, - uint32_t firstIndex, - uint32_t numPoints); - - - /** - * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4 - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data - * @param[in] firstIndex is the first output sample to start with. - * @param[in] numPoints is the number of output points to be computed. - * @param[in] pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. - * @param[in] pScratch2 points to scratch buffer of size min(srcALen, srcBLen). - * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. - */ - arm_status arm_conv_partial_fast_opt_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst, - uint32_t firstIndex, - uint32_t numPoints, - q15_t * pScratch1, - q15_t * pScratch2); - - - /** - * @brief Partial convolution of Q31 sequences. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data - * @param[in] firstIndex is the first output sample to start with. - * @param[in] numPoints is the number of output points to be computed. - * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. - */ - arm_status arm_conv_partial_q31( - q31_t * pSrcA, - uint32_t srcALen, - q31_t * pSrcB, - uint32_t srcBLen, - q31_t * pDst, - uint32_t firstIndex, - uint32_t numPoints); - - - /** - * @brief Partial convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4 - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data - * @param[in] firstIndex is the first output sample to start with. - * @param[in] numPoints is the number of output points to be computed. - * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. - */ - arm_status arm_conv_partial_fast_q31( - q31_t * pSrcA, - uint32_t srcALen, - q31_t * pSrcB, - uint32_t srcBLen, - q31_t * pDst, - uint32_t firstIndex, - uint32_t numPoints); - - - /** - * @brief Partial convolution of Q7 sequences - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data - * @param[in] firstIndex is the first output sample to start with. - * @param[in] numPoints is the number of output points to be computed. - * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. - * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen). - * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. - */ - arm_status arm_conv_partial_opt_q7( - q7_t * pSrcA, - uint32_t srcALen, - q7_t * pSrcB, - uint32_t srcBLen, - q7_t * pDst, - uint32_t firstIndex, - uint32_t numPoints, - q15_t * pScratch1, - q15_t * pScratch2); - - -/** - * @brief Partial convolution of Q7 sequences. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data - * @param[in] firstIndex is the first output sample to start with. - * @param[in] numPoints is the number of output points to be computed. - * @return Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2]. - */ - arm_status arm_conv_partial_q7( - q7_t * pSrcA, - uint32_t srcALen, - q7_t * pSrcB, - uint32_t srcBLen, - q7_t * pDst, - uint32_t firstIndex, - uint32_t numPoints); - - - /** - * @brief Instance structure for the Q15 FIR decimator. - */ - typedef struct - { - uint8_t M; /**< decimation factor. */ - uint16_t numTaps; /**< number of coefficients in the filter. */ - q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - } arm_fir_decimate_instance_q15; - - /** - * @brief Instance structure for the Q31 FIR decimator. - */ - typedef struct - { - uint8_t M; /**< decimation factor. */ - uint16_t numTaps; /**< number of coefficients in the filter. */ - q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - } arm_fir_decimate_instance_q31; - - /** - * @brief Instance structure for the floating-point FIR decimator. - */ - typedef struct - { - uint8_t M; /**< decimation factor. */ - uint16_t numTaps; /**< number of coefficients in the filter. */ - float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - } arm_fir_decimate_instance_f32; - - - /** - * @brief Processing function for the floating-point FIR decimator. - * @param[in] S points to an instance of the floating-point FIR decimator structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data - * @param[in] blockSize number of input samples to process per call. - */ - void arm_fir_decimate_f32( - const arm_fir_decimate_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the floating-point FIR decimator. - * @param[in,out] S points to an instance of the floating-point FIR decimator structure. - * @param[in] numTaps number of coefficients in the filter. - * @param[in] M decimation factor. - * @param[in] pCoeffs points to the filter coefficients. - * @param[in] pState points to the state buffer. - * @param[in] blockSize number of input samples to process per call. - * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if - * <code>blockSize</code> is not a multiple of <code>M</code>. - */ - arm_status arm_fir_decimate_init_f32( - arm_fir_decimate_instance_f32 * S, - uint16_t numTaps, - uint8_t M, - float32_t * pCoeffs, - float32_t * pState, - uint32_t blockSize); - - - /** - * @brief Processing function for the Q15 FIR decimator. - * @param[in] S points to an instance of the Q15 FIR decimator structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data - * @param[in] blockSize number of input samples to process per call. - */ - void arm_fir_decimate_q15( - const arm_fir_decimate_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Processing function for the Q15 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4. - * @param[in] S points to an instance of the Q15 FIR decimator structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data - * @param[in] blockSize number of input samples to process per call. - */ - void arm_fir_decimate_fast_q15( - const arm_fir_decimate_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the Q15 FIR decimator. - * @param[in,out] S points to an instance of the Q15 FIR decimator structure. - * @param[in] numTaps number of coefficients in the filter. - * @param[in] M decimation factor. - * @param[in] pCoeffs points to the filter coefficients. - * @param[in] pState points to the state buffer. - * @param[in] blockSize number of input samples to process per call. - * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if - * <code>blockSize</code> is not a multiple of <code>M</code>. - */ - arm_status arm_fir_decimate_init_q15( - arm_fir_decimate_instance_q15 * S, - uint16_t numTaps, - uint8_t M, - q15_t * pCoeffs, - q15_t * pState, - uint32_t blockSize); - - - /** - * @brief Processing function for the Q31 FIR decimator. - * @param[in] S points to an instance of the Q31 FIR decimator structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data - * @param[in] blockSize number of input samples to process per call. - */ - void arm_fir_decimate_q31( - const arm_fir_decimate_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - - /** - * @brief Processing function for the Q31 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4. - * @param[in] S points to an instance of the Q31 FIR decimator structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data - * @param[in] blockSize number of input samples to process per call. - */ - void arm_fir_decimate_fast_q31( - arm_fir_decimate_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the Q31 FIR decimator. - * @param[in,out] S points to an instance of the Q31 FIR decimator structure. - * @param[in] numTaps number of coefficients in the filter. - * @param[in] M decimation factor. - * @param[in] pCoeffs points to the filter coefficients. - * @param[in] pState points to the state buffer. - * @param[in] blockSize number of input samples to process per call. - * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if - * <code>blockSize</code> is not a multiple of <code>M</code>. - */ - arm_status arm_fir_decimate_init_q31( - arm_fir_decimate_instance_q31 * S, - uint16_t numTaps, - uint8_t M, - q31_t * pCoeffs, - q31_t * pState, - uint32_t blockSize); - - - /** - * @brief Instance structure for the Q15 FIR interpolator. - */ - typedef struct - { - uint8_t L; /**< upsample factor. */ - uint16_t phaseLength; /**< length of each polyphase filter component. */ - q15_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ - q15_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */ - } arm_fir_interpolate_instance_q15; - - /** - * @brief Instance structure for the Q31 FIR interpolator. - */ - typedef struct - { - uint8_t L; /**< upsample factor. */ - uint16_t phaseLength; /**< length of each polyphase filter component. */ - q31_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ - q31_t *pState; /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */ - } arm_fir_interpolate_instance_q31; - - /** - * @brief Instance structure for the floating-point FIR interpolator. - */ - typedef struct - { - uint8_t L; /**< upsample factor. */ - uint16_t phaseLength; /**< length of each polyphase filter component. */ - float32_t *pCoeffs; /**< points to the coefficient array. The array is of length L*phaseLength. */ - float32_t *pState; /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */ - } arm_fir_interpolate_instance_f32; - - - /** - * @brief Processing function for the Q15 FIR interpolator. - * @param[in] S points to an instance of the Q15 FIR interpolator structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of input samples to process per call. - */ - void arm_fir_interpolate_q15( - const arm_fir_interpolate_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the Q15 FIR interpolator. - * @param[in,out] S points to an instance of the Q15 FIR interpolator structure. - * @param[in] L upsample factor. - * @param[in] numTaps number of filter coefficients in the filter. - * @param[in] pCoeffs points to the filter coefficient buffer. - * @param[in] pState points to the state buffer. - * @param[in] blockSize number of input samples to process per call. - * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if - * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>. - */ - arm_status arm_fir_interpolate_init_q15( - arm_fir_interpolate_instance_q15 * S, - uint8_t L, - uint16_t numTaps, - q15_t * pCoeffs, - q15_t * pState, - uint32_t blockSize); - - - /** - * @brief Processing function for the Q31 FIR interpolator. - * @param[in] S points to an instance of the Q15 FIR interpolator structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of input samples to process per call. - */ - void arm_fir_interpolate_q31( - const arm_fir_interpolate_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the Q31 FIR interpolator. - * @param[in,out] S points to an instance of the Q31 FIR interpolator structure. - * @param[in] L upsample factor. - * @param[in] numTaps number of filter coefficients in the filter. - * @param[in] pCoeffs points to the filter coefficient buffer. - * @param[in] pState points to the state buffer. - * @param[in] blockSize number of input samples to process per call. - * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if - * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>. - */ - arm_status arm_fir_interpolate_init_q31( - arm_fir_interpolate_instance_q31 * S, - uint8_t L, - uint16_t numTaps, - q31_t * pCoeffs, - q31_t * pState, - uint32_t blockSize); - - - /** - * @brief Processing function for the floating-point FIR interpolator. - * @param[in] S points to an instance of the floating-point FIR interpolator structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of input samples to process per call. - */ - void arm_fir_interpolate_f32( - const arm_fir_interpolate_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the floating-point FIR interpolator. - * @param[in,out] S points to an instance of the floating-point FIR interpolator structure. - * @param[in] L upsample factor. - * @param[in] numTaps number of filter coefficients in the filter. - * @param[in] pCoeffs points to the filter coefficient buffer. - * @param[in] pState points to the state buffer. - * @param[in] blockSize number of input samples to process per call. - * @return The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if - * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>. - */ - arm_status arm_fir_interpolate_init_f32( - arm_fir_interpolate_instance_f32 * S, - uint8_t L, - uint16_t numTaps, - float32_t * pCoeffs, - float32_t * pState, - uint32_t blockSize); - - - /** - * @brief Instance structure for the high precision Q31 Biquad cascade filter. - */ - typedef struct - { - uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ - q63_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */ - q31_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ - uint8_t postShift; /**< additional shift, in bits, applied to each output sample. */ - } arm_biquad_cas_df1_32x64_ins_q31; - - - /** - * @param[in] S points to an instance of the high precision Q31 Biquad cascade filter structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data - * @param[in] blockSize number of samples to process. - */ - void arm_biquad_cas_df1_32x64_q31( - const arm_biquad_cas_df1_32x64_ins_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @param[in,out] S points to an instance of the high precision Q31 Biquad cascade filter structure. - * @param[in] numStages number of 2nd order stages in the filter. - * @param[in] pCoeffs points to the filter coefficients. - * @param[in] pState points to the state buffer. - * @param[in] postShift shift to be applied to the output. Varies according to the coefficients format - */ - void arm_biquad_cas_df1_32x64_init_q31( - arm_biquad_cas_df1_32x64_ins_q31 * S, - uint8_t numStages, - q31_t * pCoeffs, - q63_t * pState, - uint8_t postShift); - - - /** - * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter. - */ - typedef struct - { - uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ - float32_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */ - float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ - } arm_biquad_cascade_df2T_instance_f32; - - /** - * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter. - */ - typedef struct - { - uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ - float32_t *pState; /**< points to the array of state coefficients. The array is of length 4*numStages. */ - float32_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ - } arm_biquad_cascade_stereo_df2T_instance_f32; - - /** - * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter. - */ - typedef struct - { - uint8_t numStages; /**< number of 2nd order stages in the filter. Overall order is 2*numStages. */ - float64_t *pState; /**< points to the array of state coefficients. The array is of length 2*numStages. */ - float64_t *pCoeffs; /**< points to the array of coefficients. The array is of length 5*numStages. */ - } arm_biquad_cascade_df2T_instance_f64; - - - /** - * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. - * @param[in] S points to an instance of the filter data structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data - * @param[in] blockSize number of samples to process. - */ - void arm_biquad_cascade_df2T_f32( - const arm_biquad_cascade_df2T_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. 2 channels - * @param[in] S points to an instance of the filter data structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data - * @param[in] blockSize number of samples to process. - */ - void arm_biquad_cascade_stereo_df2T_f32( - const arm_biquad_cascade_stereo_df2T_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. - * @param[in] S points to an instance of the filter data structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data - * @param[in] blockSize number of samples to process. - */ - void arm_biquad_cascade_df2T_f64( - const arm_biquad_cascade_df2T_instance_f64 * S, - float64_t * pSrc, - float64_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter. - * @param[in,out] S points to an instance of the filter data structure. - * @param[in] numStages number of 2nd order stages in the filter. - * @param[in] pCoeffs points to the filter coefficients. - * @param[in] pState points to the state buffer. - */ - void arm_biquad_cascade_df2T_init_f32( - arm_biquad_cascade_df2T_instance_f32 * S, - uint8_t numStages, - float32_t * pCoeffs, - float32_t * pState); - - - /** - * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter. - * @param[in,out] S points to an instance of the filter data structure. - * @param[in] numStages number of 2nd order stages in the filter. - * @param[in] pCoeffs points to the filter coefficients. - * @param[in] pState points to the state buffer. - */ - void arm_biquad_cascade_stereo_df2T_init_f32( - arm_biquad_cascade_stereo_df2T_instance_f32 * S, - uint8_t numStages, - float32_t * pCoeffs, - float32_t * pState); - - - /** - * @brief Initialization function for the floating-point transposed direct form II Biquad cascade filter. - * @param[in,out] S points to an instance of the filter data structure. - * @param[in] numStages number of 2nd order stages in the filter. - * @param[in] pCoeffs points to the filter coefficients. - * @param[in] pState points to the state buffer. - */ - void arm_biquad_cascade_df2T_init_f64( - arm_biquad_cascade_df2T_instance_f64 * S, - uint8_t numStages, - float64_t * pCoeffs, - float64_t * pState); - - - /** - * @brief Instance structure for the Q15 FIR lattice filter. - */ - typedef struct - { - uint16_t numStages; /**< number of filter stages. */ - q15_t *pState; /**< points to the state variable array. The array is of length numStages. */ - q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ - } arm_fir_lattice_instance_q15; - - /** - * @brief Instance structure for the Q31 FIR lattice filter. - */ - typedef struct - { - uint16_t numStages; /**< number of filter stages. */ - q31_t *pState; /**< points to the state variable array. The array is of length numStages. */ - q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ - } arm_fir_lattice_instance_q31; - - /** - * @brief Instance structure for the floating-point FIR lattice filter. - */ - typedef struct - { - uint16_t numStages; /**< number of filter stages. */ - float32_t *pState; /**< points to the state variable array. The array is of length numStages. */ - float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numStages. */ - } arm_fir_lattice_instance_f32; - - - /** - * @brief Initialization function for the Q15 FIR lattice filter. - * @param[in] S points to an instance of the Q15 FIR lattice structure. - * @param[in] numStages number of filter stages. - * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages. - * @param[in] pState points to the state buffer. The array is of length numStages. - */ - void arm_fir_lattice_init_q15( - arm_fir_lattice_instance_q15 * S, - uint16_t numStages, - q15_t * pCoeffs, - q15_t * pState); - - - /** - * @brief Processing function for the Q15 FIR lattice filter. - * @param[in] S points to an instance of the Q15 FIR lattice structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of samples to process. - */ - void arm_fir_lattice_q15( - const arm_fir_lattice_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the Q31 FIR lattice filter. - * @param[in] S points to an instance of the Q31 FIR lattice structure. - * @param[in] numStages number of filter stages. - * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages. - * @param[in] pState points to the state buffer. The array is of length numStages. - */ - void arm_fir_lattice_init_q31( - arm_fir_lattice_instance_q31 * S, - uint16_t numStages, - q31_t * pCoeffs, - q31_t * pState); - - - /** - * @brief Processing function for the Q31 FIR lattice filter. - * @param[in] S points to an instance of the Q31 FIR lattice structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data - * @param[in] blockSize number of samples to process. - */ - void arm_fir_lattice_q31( - const arm_fir_lattice_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - - -/** - * @brief Initialization function for the floating-point FIR lattice filter. - * @param[in] S points to an instance of the floating-point FIR lattice structure. - * @param[in] numStages number of filter stages. - * @param[in] pCoeffs points to the coefficient buffer. The array is of length numStages. - * @param[in] pState points to the state buffer. The array is of length numStages. - */ - void arm_fir_lattice_init_f32( - arm_fir_lattice_instance_f32 * S, - uint16_t numStages, - float32_t * pCoeffs, - float32_t * pState); - - - /** - * @brief Processing function for the floating-point FIR lattice filter. - * @param[in] S points to an instance of the floating-point FIR lattice structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data - * @param[in] blockSize number of samples to process. - */ - void arm_fir_lattice_f32( - const arm_fir_lattice_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Instance structure for the Q15 IIR lattice filter. - */ - typedef struct - { - uint16_t numStages; /**< number of stages in the filter. */ - q15_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ - q15_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ - q15_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ - } arm_iir_lattice_instance_q15; - - /** - * @brief Instance structure for the Q31 IIR lattice filter. - */ - typedef struct - { - uint16_t numStages; /**< number of stages in the filter. */ - q31_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ - q31_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ - q31_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ - } arm_iir_lattice_instance_q31; - - /** - * @brief Instance structure for the floating-point IIR lattice filter. - */ - typedef struct - { - uint16_t numStages; /**< number of stages in the filter. */ - float32_t *pState; /**< points to the state variable array. The array is of length numStages+blockSize. */ - float32_t *pkCoeffs; /**< points to the reflection coefficient array. The array is of length numStages. */ - float32_t *pvCoeffs; /**< points to the ladder coefficient array. The array is of length numStages+1. */ - } arm_iir_lattice_instance_f32; - - - /** - * @brief Processing function for the floating-point IIR lattice filter. - * @param[in] S points to an instance of the floating-point IIR lattice structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of samples to process. - */ - void arm_iir_lattice_f32( - const arm_iir_lattice_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the floating-point IIR lattice filter. - * @param[in] S points to an instance of the floating-point IIR lattice structure. - * @param[in] numStages number of stages in the filter. - * @param[in] pkCoeffs points to the reflection coefficient buffer. The array is of length numStages. - * @param[in] pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1. - * @param[in] pState points to the state buffer. The array is of length numStages+blockSize-1. - * @param[in] blockSize number of samples to process. - */ - void arm_iir_lattice_init_f32( - arm_iir_lattice_instance_f32 * S, - uint16_t numStages, - float32_t * pkCoeffs, - float32_t * pvCoeffs, - float32_t * pState, - uint32_t blockSize); - - - /** - * @brief Processing function for the Q31 IIR lattice filter. - * @param[in] S points to an instance of the Q31 IIR lattice structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of samples to process. - */ - void arm_iir_lattice_q31( - const arm_iir_lattice_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Initialization function for the Q31 IIR lattice filter. - * @param[in] S points to an instance of the Q31 IIR lattice structure. - * @param[in] numStages number of stages in the filter. - * @param[in] pkCoeffs points to the reflection coefficient buffer. The array is of length numStages. - * @param[in] pvCoeffs points to the ladder coefficient buffer. The array is of length numStages+1. - * @param[in] pState points to the state buffer. The array is of length numStages+blockSize. - * @param[in] blockSize number of samples to process. - */ - void arm_iir_lattice_init_q31( - arm_iir_lattice_instance_q31 * S, - uint16_t numStages, - q31_t * pkCoeffs, - q31_t * pvCoeffs, - q31_t * pState, - uint32_t blockSize); - - - /** - * @brief Processing function for the Q15 IIR lattice filter. - * @param[in] S points to an instance of the Q15 IIR lattice structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data. - * @param[in] blockSize number of samples to process. - */ - void arm_iir_lattice_q15( - const arm_iir_lattice_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst, - uint32_t blockSize); - - -/** - * @brief Initialization function for the Q15 IIR lattice filter. - * @param[in] S points to an instance of the fixed-point Q15 IIR lattice structure. - * @param[in] numStages number of stages in the filter. - * @param[in] pkCoeffs points to reflection coefficient buffer. The array is of length numStages. - * @param[in] pvCoeffs points to ladder coefficient buffer. The array is of length numStages+1. - * @param[in] pState points to state buffer. The array is of length numStages+blockSize. - * @param[in] blockSize number of samples to process per call. - */ - void arm_iir_lattice_init_q15( - arm_iir_lattice_instance_q15 * S, - uint16_t numStages, - q15_t * pkCoeffs, - q15_t * pvCoeffs, - q15_t * pState, - uint32_t blockSize); - - - /** - * @brief Instance structure for the floating-point LMS filter. - */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ - float32_t mu; /**< step size that controls filter coefficient updates. */ - } arm_lms_instance_f32; - - - /** - * @brief Processing function for floating-point LMS filter. - * @param[in] S points to an instance of the floating-point LMS filter structure. - * @param[in] pSrc points to the block of input data. - * @param[in] pRef points to the block of reference data. - * @param[out] pOut points to the block of output data. - * @param[out] pErr points to the block of error data. - * @param[in] blockSize number of samples to process. - */ - void arm_lms_f32( - const arm_lms_instance_f32 * S, - float32_t * pSrc, - float32_t * pRef, - float32_t * pOut, - float32_t * pErr, - uint32_t blockSize); - - - /** - * @brief Initialization function for floating-point LMS filter. - * @param[in] S points to an instance of the floating-point LMS filter structure. - * @param[in] numTaps number of filter coefficients. - * @param[in] pCoeffs points to the coefficient buffer. - * @param[in] pState points to state buffer. - * @param[in] mu step size that controls filter coefficient updates. - * @param[in] blockSize number of samples to process. - */ - void arm_lms_init_f32( - arm_lms_instance_f32 * S, - uint16_t numTaps, - float32_t * pCoeffs, - float32_t * pState, - float32_t mu, - uint32_t blockSize); - - - /** - * @brief Instance structure for the Q15 LMS filter. - */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ - q15_t mu; /**< step size that controls filter coefficient updates. */ - uint32_t postShift; /**< bit shift applied to coefficients. */ - } arm_lms_instance_q15; - - - /** - * @brief Initialization function for the Q15 LMS filter. - * @param[in] S points to an instance of the Q15 LMS filter structure. - * @param[in] numTaps number of filter coefficients. - * @param[in] pCoeffs points to the coefficient buffer. - * @param[in] pState points to the state buffer. - * @param[in] mu step size that controls filter coefficient updates. - * @param[in] blockSize number of samples to process. - * @param[in] postShift bit shift applied to coefficients. - */ - void arm_lms_init_q15( - arm_lms_instance_q15 * S, - uint16_t numTaps, - q15_t * pCoeffs, - q15_t * pState, - q15_t mu, - uint32_t blockSize, - uint32_t postShift); - - - /** - * @brief Processing function for Q15 LMS filter. - * @param[in] S points to an instance of the Q15 LMS filter structure. - * @param[in] pSrc points to the block of input data. - * @param[in] pRef points to the block of reference data. - * @param[out] pOut points to the block of output data. - * @param[out] pErr points to the block of error data. - * @param[in] blockSize number of samples to process. - */ - void arm_lms_q15( - const arm_lms_instance_q15 * S, - q15_t * pSrc, - q15_t * pRef, - q15_t * pOut, - q15_t * pErr, - uint32_t blockSize); - - - /** - * @brief Instance structure for the Q31 LMS filter. - */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ - q31_t mu; /**< step size that controls filter coefficient updates. */ - uint32_t postShift; /**< bit shift applied to coefficients. */ - } arm_lms_instance_q31; - - - /** - * @brief Processing function for Q31 LMS filter. - * @param[in] S points to an instance of the Q15 LMS filter structure. - * @param[in] pSrc points to the block of input data. - * @param[in] pRef points to the block of reference data. - * @param[out] pOut points to the block of output data. - * @param[out] pErr points to the block of error data. - * @param[in] blockSize number of samples to process. - */ - void arm_lms_q31( - const arm_lms_instance_q31 * S, - q31_t * pSrc, - q31_t * pRef, - q31_t * pOut, - q31_t * pErr, - uint32_t blockSize); - - - /** - * @brief Initialization function for Q31 LMS filter. - * @param[in] S points to an instance of the Q31 LMS filter structure. - * @param[in] numTaps number of filter coefficients. - * @param[in] pCoeffs points to coefficient buffer. - * @param[in] pState points to state buffer. - * @param[in] mu step size that controls filter coefficient updates. - * @param[in] blockSize number of samples to process. - * @param[in] postShift bit shift applied to coefficients. - */ - void arm_lms_init_q31( - arm_lms_instance_q31 * S, - uint16_t numTaps, - q31_t * pCoeffs, - q31_t * pState, - q31_t mu, - uint32_t blockSize, - uint32_t postShift); - - - /** - * @brief Instance structure for the floating-point normalized LMS filter. - */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - float32_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ - float32_t mu; /**< step size that control filter coefficient updates. */ - float32_t energy; /**< saves previous frame energy. */ - float32_t x0; /**< saves previous input sample. */ - } arm_lms_norm_instance_f32; - - - /** - * @brief Processing function for floating-point normalized LMS filter. - * @param[in] S points to an instance of the floating-point normalized LMS filter structure. - * @param[in] pSrc points to the block of input data. - * @param[in] pRef points to the block of reference data. - * @param[out] pOut points to the block of output data. - * @param[out] pErr points to the block of error data. - * @param[in] blockSize number of samples to process. - */ - void arm_lms_norm_f32( - arm_lms_norm_instance_f32 * S, - float32_t * pSrc, - float32_t * pRef, - float32_t * pOut, - float32_t * pErr, - uint32_t blockSize); - - - /** - * @brief Initialization function for floating-point normalized LMS filter. - * @param[in] S points to an instance of the floating-point LMS filter structure. - * @param[in] numTaps number of filter coefficients. - * @param[in] pCoeffs points to coefficient buffer. - * @param[in] pState points to state buffer. - * @param[in] mu step size that controls filter coefficient updates. - * @param[in] blockSize number of samples to process. - */ - void arm_lms_norm_init_f32( - arm_lms_norm_instance_f32 * S, - uint16_t numTaps, - float32_t * pCoeffs, - float32_t * pState, - float32_t mu, - uint32_t blockSize); - - - /** - * @brief Instance structure for the Q31 normalized LMS filter. - */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - q31_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ - q31_t mu; /**< step size that controls filter coefficient updates. */ - uint8_t postShift; /**< bit shift applied to coefficients. */ - q31_t *recipTable; /**< points to the reciprocal initial value table. */ - q31_t energy; /**< saves previous frame energy. */ - q31_t x0; /**< saves previous input sample. */ - } arm_lms_norm_instance_q31; - - - /** - * @brief Processing function for Q31 normalized LMS filter. - * @param[in] S points to an instance of the Q31 normalized LMS filter structure. - * @param[in] pSrc points to the block of input data. - * @param[in] pRef points to the block of reference data. - * @param[out] pOut points to the block of output data. - * @param[out] pErr points to the block of error data. - * @param[in] blockSize number of samples to process. - */ - void arm_lms_norm_q31( - arm_lms_norm_instance_q31 * S, - q31_t * pSrc, - q31_t * pRef, - q31_t * pOut, - q31_t * pErr, - uint32_t blockSize); - - - /** - * @brief Initialization function for Q31 normalized LMS filter. - * @param[in] S points to an instance of the Q31 normalized LMS filter structure. - * @param[in] numTaps number of filter coefficients. - * @param[in] pCoeffs points to coefficient buffer. - * @param[in] pState points to state buffer. - * @param[in] mu step size that controls filter coefficient updates. - * @param[in] blockSize number of samples to process. - * @param[in] postShift bit shift applied to coefficients. - */ - void arm_lms_norm_init_q31( - arm_lms_norm_instance_q31 * S, - uint16_t numTaps, - q31_t * pCoeffs, - q31_t * pState, - q31_t mu, - uint32_t blockSize, - uint8_t postShift); - - - /** - * @brief Instance structure for the Q15 normalized LMS filter. - */ - typedef struct - { - uint16_t numTaps; /**< Number of coefficients in the filter. */ - q15_t *pState; /**< points to the state variable array. The array is of length numTaps+blockSize-1. */ - q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps. */ - q15_t mu; /**< step size that controls filter coefficient updates. */ - uint8_t postShift; /**< bit shift applied to coefficients. */ - q15_t *recipTable; /**< Points to the reciprocal initial value table. */ - q15_t energy; /**< saves previous frame energy. */ - q15_t x0; /**< saves previous input sample. */ - } arm_lms_norm_instance_q15; - - - /** - * @brief Processing function for Q15 normalized LMS filter. - * @param[in] S points to an instance of the Q15 normalized LMS filter structure. - * @param[in] pSrc points to the block of input data. - * @param[in] pRef points to the block of reference data. - * @param[out] pOut points to the block of output data. - * @param[out] pErr points to the block of error data. - * @param[in] blockSize number of samples to process. - */ - void arm_lms_norm_q15( - arm_lms_norm_instance_q15 * S, - q15_t * pSrc, - q15_t * pRef, - q15_t * pOut, - q15_t * pErr, - uint32_t blockSize); - - - /** - * @brief Initialization function for Q15 normalized LMS filter. - * @param[in] S points to an instance of the Q15 normalized LMS filter structure. - * @param[in] numTaps number of filter coefficients. - * @param[in] pCoeffs points to coefficient buffer. - * @param[in] pState points to state buffer. - * @param[in] mu step size that controls filter coefficient updates. - * @param[in] blockSize number of samples to process. - * @param[in] postShift bit shift applied to coefficients. - */ - void arm_lms_norm_init_q15( - arm_lms_norm_instance_q15 * S, - uint16_t numTaps, - q15_t * pCoeffs, - q15_t * pState, - q15_t mu, - uint32_t blockSize, - uint8_t postShift); - - - /** - * @brief Correlation of floating-point sequences. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. - */ - void arm_correlate_f32( - float32_t * pSrcA, - uint32_t srcALen, - float32_t * pSrcB, - uint32_t srcBLen, - float32_t * pDst); - - - /** - * @brief Correlation of Q15 sequences - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. - * @param[in] pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. - */ - void arm_correlate_opt_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst, - q15_t * pScratch); - - - /** - * @brief Correlation of Q15 sequences. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. - */ - - void arm_correlate_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst); - - - /** - * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. - */ - - void arm_correlate_fast_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst); - - - /** - * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. - * @param[in] pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. - */ - void arm_correlate_fast_opt_q15( - q15_t * pSrcA, - uint32_t srcALen, - q15_t * pSrcB, - uint32_t srcBLen, - q15_t * pDst, - q15_t * pScratch); - - - /** - * @brief Correlation of Q31 sequences. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. - */ - void arm_correlate_q31( - q31_t * pSrcA, - uint32_t srcALen, - q31_t * pSrcB, - uint32_t srcBLen, - q31_t * pDst); - - - /** - * @brief Correlation of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4 - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. - */ - void arm_correlate_fast_q31( - q31_t * pSrcA, - uint32_t srcALen, - q31_t * pSrcB, - uint32_t srcBLen, - q31_t * pDst); - - - /** - * @brief Correlation of Q7 sequences. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. - * @param[in] pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. - * @param[in] pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen). - */ - void arm_correlate_opt_q7( - q7_t * pSrcA, - uint32_t srcALen, - q7_t * pSrcB, - uint32_t srcBLen, - q7_t * pDst, - q15_t * pScratch1, - q15_t * pScratch2); - - - /** - * @brief Correlation of Q7 sequences. - * @param[in] pSrcA points to the first input sequence. - * @param[in] srcALen length of the first input sequence. - * @param[in] pSrcB points to the second input sequence. - * @param[in] srcBLen length of the second input sequence. - * @param[out] pDst points to the block of output data Length 2 * max(srcALen, srcBLen) - 1. - */ - void arm_correlate_q7( - q7_t * pSrcA, - uint32_t srcALen, - q7_t * pSrcB, - uint32_t srcBLen, - q7_t * pDst); - - - /** - * @brief Instance structure for the floating-point sparse FIR filter. - */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ - float32_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ - float32_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ - int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ - } arm_fir_sparse_instance_f32; - - /** - * @brief Instance structure for the Q31 sparse FIR filter. - */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ - q31_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ - q31_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ - int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ - } arm_fir_sparse_instance_q31; - - /** - * @brief Instance structure for the Q15 sparse FIR filter. - */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ - q15_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ - q15_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ - int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ - } arm_fir_sparse_instance_q15; - - /** - * @brief Instance structure for the Q7 sparse FIR filter. - */ - typedef struct - { - uint16_t numTaps; /**< number of coefficients in the filter. */ - uint16_t stateIndex; /**< state buffer index. Points to the oldest sample in the state buffer. */ - q7_t *pState; /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */ - q7_t *pCoeffs; /**< points to the coefficient array. The array is of length numTaps.*/ - uint16_t maxDelay; /**< maximum offset specified by the pTapDelay array. */ - int32_t *pTapDelay; /**< points to the array of delay values. The array is of length numTaps. */ - } arm_fir_sparse_instance_q7; - - - /** - * @brief Processing function for the floating-point sparse FIR filter. - * @param[in] S points to an instance of the floating-point sparse FIR structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data - * @param[in] pScratchIn points to a temporary buffer of size blockSize. - * @param[in] blockSize number of input samples to process per call. - */ - void arm_fir_sparse_f32( - arm_fir_sparse_instance_f32 * S, - float32_t * pSrc, - float32_t * pDst, - float32_t * pScratchIn, - uint32_t blockSize); - - - /** - * @brief Initialization function for the floating-point sparse FIR filter. - * @param[in,out] S points to an instance of the floating-point sparse FIR structure. - * @param[in] numTaps number of nonzero coefficients in the filter. - * @param[in] pCoeffs points to the array of filter coefficients. - * @param[in] pState points to the state buffer. - * @param[in] pTapDelay points to the array of offset times. - * @param[in] maxDelay maximum offset time supported. - * @param[in] blockSize number of samples that will be processed per block. - */ - void arm_fir_sparse_init_f32( - arm_fir_sparse_instance_f32 * S, - uint16_t numTaps, - float32_t * pCoeffs, - float32_t * pState, - int32_t * pTapDelay, - uint16_t maxDelay, - uint32_t blockSize); - - - /** - * @brief Processing function for the Q31 sparse FIR filter. - * @param[in] S points to an instance of the Q31 sparse FIR structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data - * @param[in] pScratchIn points to a temporary buffer of size blockSize. - * @param[in] blockSize number of input samples to process per call. - */ - void arm_fir_sparse_q31( - arm_fir_sparse_instance_q31 * S, - q31_t * pSrc, - q31_t * pDst, - q31_t * pScratchIn, - uint32_t blockSize); - - - /** - * @brief Initialization function for the Q31 sparse FIR filter. - * @param[in,out] S points to an instance of the Q31 sparse FIR structure. - * @param[in] numTaps number of nonzero coefficients in the filter. - * @param[in] pCoeffs points to the array of filter coefficients. - * @param[in] pState points to the state buffer. - * @param[in] pTapDelay points to the array of offset times. - * @param[in] maxDelay maximum offset time supported. - * @param[in] blockSize number of samples that will be processed per block. - */ - void arm_fir_sparse_init_q31( - arm_fir_sparse_instance_q31 * S, - uint16_t numTaps, - q31_t * pCoeffs, - q31_t * pState, - int32_t * pTapDelay, - uint16_t maxDelay, - uint32_t blockSize); - - - /** - * @brief Processing function for the Q15 sparse FIR filter. - * @param[in] S points to an instance of the Q15 sparse FIR structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data - * @param[in] pScratchIn points to a temporary buffer of size blockSize. - * @param[in] pScratchOut points to a temporary buffer of size blockSize. - * @param[in] blockSize number of input samples to process per call. - */ - void arm_fir_sparse_q15( - arm_fir_sparse_instance_q15 * S, - q15_t * pSrc, - q15_t * pDst, - q15_t * pScratchIn, - q31_t * pScratchOut, - uint32_t blockSize); - - - /** - * @brief Initialization function for the Q15 sparse FIR filter. - * @param[in,out] S points to an instance of the Q15 sparse FIR structure. - * @param[in] numTaps number of nonzero coefficients in the filter. - * @param[in] pCoeffs points to the array of filter coefficients. - * @param[in] pState points to the state buffer. - * @param[in] pTapDelay points to the array of offset times. - * @param[in] maxDelay maximum offset time supported. - * @param[in] blockSize number of samples that will be processed per block. - */ - void arm_fir_sparse_init_q15( - arm_fir_sparse_instance_q15 * S, - uint16_t numTaps, - q15_t * pCoeffs, - q15_t * pState, - int32_t * pTapDelay, - uint16_t maxDelay, - uint32_t blockSize); - - - /** - * @brief Processing function for the Q7 sparse FIR filter. - * @param[in] S points to an instance of the Q7 sparse FIR structure. - * @param[in] pSrc points to the block of input data. - * @param[out] pDst points to the block of output data - * @param[in] pScratchIn points to a temporary buffer of size blockSize. - * @param[in] pScratchOut points to a temporary buffer of size blockSize. - * @param[in] blockSize number of input samples to process per call. - */ - void arm_fir_sparse_q7( - arm_fir_sparse_instance_q7 * S, - q7_t * pSrc, - q7_t * pDst, - q7_t * pScratchIn, - q31_t * pScratchOut, - uint32_t blockSize); - - - /** - * @brief Initialization function for the Q7 sparse FIR filter. - * @param[in,out] S points to an instance of the Q7 sparse FIR structure. - * @param[in] numTaps number of nonzero coefficients in the filter. - * @param[in] pCoeffs points to the array of filter coefficients. - * @param[in] pState points to the state buffer. - * @param[in] pTapDelay points to the array of offset times. - * @param[in] maxDelay maximum offset time supported. - * @param[in] blockSize number of samples that will be processed per block. - */ - void arm_fir_sparse_init_q7( - arm_fir_sparse_instance_q7 * S, - uint16_t numTaps, - q7_t * pCoeffs, - q7_t * pState, - int32_t * pTapDelay, - uint16_t maxDelay, - uint32_t blockSize); - - - /** - * @brief Floating-point sin_cos function. - * @param[in] theta input value in degrees - * @param[out] pSinVal points to the processed sine output. - * @param[out] pCosVal points to the processed cos output. - */ - void arm_sin_cos_f32( - float32_t theta, - float32_t * pSinVal, - float32_t * pCosVal); - - - /** - * @brief Q31 sin_cos function. - * @param[in] theta scaled input value in degrees - * @param[out] pSinVal points to the processed sine output. - * @param[out] pCosVal points to the processed cosine output. - */ - void arm_sin_cos_q31( - q31_t theta, - q31_t * pSinVal, - q31_t * pCosVal); - - - /** - * @brief Floating-point complex conjugate. - * @param[in] pSrc points to the input vector - * @param[out] pDst points to the output vector - * @param[in] numSamples number of complex samples in each vector - */ - void arm_cmplx_conj_f32( - float32_t * pSrc, - float32_t * pDst, - uint32_t numSamples); - - /** - * @brief Q31 complex conjugate. - * @param[in] pSrc points to the input vector - * @param[out] pDst points to the output vector - * @param[in] numSamples number of complex samples in each vector - */ - void arm_cmplx_conj_q31( - q31_t * pSrc, - q31_t * pDst, - uint32_t numSamples); - - - /** - * @brief Q15 complex conjugate. - * @param[in] pSrc points to the input vector - * @param[out] pDst points to the output vector - * @param[in] numSamples number of complex samples in each vector - */ - void arm_cmplx_conj_q15( - q15_t * pSrc, - q15_t * pDst, - uint32_t numSamples); - - - /** - * @brief Floating-point complex magnitude squared - * @param[in] pSrc points to the complex input vector - * @param[out] pDst points to the real output vector - * @param[in] numSamples number of complex samples in the input vector - */ - void arm_cmplx_mag_squared_f32( - float32_t * pSrc, - float32_t * pDst, - uint32_t numSamples); - - - /** - * @brief Q31 complex magnitude squared - * @param[in] pSrc points to the complex input vector - * @param[out] pDst points to the real output vector - * @param[in] numSamples number of complex samples in the input vector - */ - void arm_cmplx_mag_squared_q31( - q31_t * pSrc, - q31_t * pDst, - uint32_t numSamples); - - - /** - * @brief Q15 complex magnitude squared - * @param[in] pSrc points to the complex input vector - * @param[out] pDst points to the real output vector - * @param[in] numSamples number of complex samples in the input vector - */ - void arm_cmplx_mag_squared_q15( - q15_t * pSrc, - q15_t * pDst, - uint32_t numSamples); - - - /** - * @ingroup groupController - */ - - /** - * @defgroup PID PID Motor Control - * - * A Proportional Integral Derivative (PID) controller is a generic feedback control - * loop mechanism widely used in industrial control systems. - * A PID controller is the most commonly used type of feedback controller. - * - * This set of functions implements (PID) controllers - * for Q15, Q31, and floating-point data types. The functions operate on a single sample - * of data and each call to the function returns a single processed value. - * <code>S</code> points to an instance of the PID control data structure. <code>in</code> - * is the input sample value. The functions return the output value. - * - * \par Algorithm: - * <pre> - * y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2] - * A0 = Kp + Ki + Kd - * A1 = (-Kp ) - (2 * Kd ) - * A2 = Kd </pre> - * - * \par - * where \c Kp is proportional constant, \c Ki is Integral constant and \c Kd is Derivative constant - * - * \par - * \image html PID.gif "Proportional Integral Derivative Controller" - * - * \par - * The PID controller calculates an "error" value as the difference between - * the measured output and the reference input. - * The controller attempts to minimize the error by adjusting the process control inputs. - * The proportional value determines the reaction to the current error, - * the integral value determines the reaction based on the sum of recent errors, - * and the derivative value determines the reaction based on the rate at which the error has been changing. - * - * \par Instance Structure - * The Gains A0, A1, A2 and state variables for a PID controller are stored together in an instance data structure. - * A separate instance structure must be defined for each PID Controller. - * There are separate instance structure declarations for each of the 3 supported data types. - * - * \par Reset Functions - * There is also an associated reset function for each data type which clears the state array. - * - * \par Initialization Functions - * There is also an associated initialization function for each data type. - * The initialization function performs the following operations: - * - Initializes the Gains A0, A1, A2 from Kp,Ki, Kd gains. - * - Zeros out the values in the state buffer. - * - * \par - * Instance structure cannot be placed into a const data section and it is recommended to use the initialization function. - * - * \par Fixed-Point Behavior - * Care must be taken when using the fixed-point versions of the PID Controller functions. - * In particular, the overflow and saturation behavior of the accumulator used in each function must be considered. - * Refer to the function specific documentation below for usage guidelines. - */ - - /** - * @addtogroup PID - * @{ - */ - - /** - * @brief Process function for the floating-point PID Control. - * @param[in,out] S is an instance of the floating-point PID Control structure - * @param[in] in input sample to process - * @return out processed output sample. - */ - static __INLINE float32_t arm_pid_f32( - arm_pid_instance_f32 * S, - float32_t in) - { - float32_t out; - - /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2] */ - out = (S->A0 * in) + - (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]); - - /* Update state */ - S->state[1] = S->state[0]; - S->state[0] = in; - S->state[2] = out; - - /* return to application */ - return (out); - - } - - /** - * @brief Process function for the Q31 PID Control. - * @param[in,out] S points to an instance of the Q31 PID Control structure - * @param[in] in input sample to process - * @return out processed output sample. - * - * <b>Scaling and Overflow Behavior:</b> - * \par - * The function is implemented using an internal 64-bit accumulator. - * The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit. - * Thus, if the accumulator result overflows it wraps around rather than clip. - * In order to avoid overflows completely the input signal must be scaled down by 2 bits as there are four additions. - * After all multiply-accumulates are performed, the 2.62 accumulator is truncated to 1.32 format and then saturated to 1.31 format. - */ - static __INLINE q31_t arm_pid_q31( - arm_pid_instance_q31 * S, - q31_t in) - { - q63_t acc; - q31_t out; - - /* acc = A0 * x[n] */ - acc = (q63_t) S->A0 * in; - - /* acc += A1 * x[n-1] */ - acc += (q63_t) S->A1 * S->state[0]; - - /* acc += A2 * x[n-2] */ - acc += (q63_t) S->A2 * S->state[1]; - - /* convert output to 1.31 format to add y[n-1] */ - out = (q31_t) (acc >> 31u); - - /* out += y[n-1] */ - out += S->state[2]; - - /* Update state */ - S->state[1] = S->state[0]; - S->state[0] = in; - S->state[2] = out; - - /* return to application */ - return (out); - } - - - /** - * @brief Process function for the Q15 PID Control. - * @param[in,out] S points to an instance of the Q15 PID Control structure - * @param[in] in input sample to process - * @return out processed output sample. - * - * <b>Scaling and Overflow Behavior:</b> - * \par - * The function is implemented using a 64-bit internal accumulator. - * Both Gains and state variables are represented in 1.15 format and multiplications yield a 2.30 result. - * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format. - * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved. - * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits. - * Lastly, the accumulator is saturated to yield a result in 1.15 format. - */ - static __INLINE q15_t arm_pid_q15( - arm_pid_instance_q15 * S, - q15_t in) - { - q63_t acc; - q15_t out; - -#ifndef ARM_MATH_CM0_FAMILY - __SIMD32_TYPE *vstate; - - /* Implementation of PID controller */ - - /* acc = A0 * x[n] */ - acc = (q31_t) __SMUAD((uint32_t)S->A0, (uint32_t)in); - - /* acc += A1 * x[n-1] + A2 * x[n-2] */ - vstate = __SIMD32_CONST(S->state); - acc = (q63_t)__SMLALD((uint32_t)S->A1, (uint32_t)*vstate, (uint64_t)acc); -#else - /* acc = A0 * x[n] */ - acc = ((q31_t) S->A0) * in; - - /* acc += A1 * x[n-1] + A2 * x[n-2] */ - acc += (q31_t) S->A1 * S->state[0]; - acc += (q31_t) S->A2 * S->state[1]; -#endif - - /* acc += y[n-1] */ - acc += (q31_t) S->state[2] << 15; - - /* saturate the output */ - out = (q15_t) (__SSAT((acc >> 15), 16)); - - /* Update state */ - S->state[1] = S->state[0]; - S->state[0] = in; - S->state[2] = out; - - /* return to application */ - return (out); - } - - /** - * @} end of PID group - */ - - - /** - * @brief Floating-point matrix inverse. - * @param[in] src points to the instance of the input floating-point matrix structure. - * @param[out] dst points to the instance of the output floating-point matrix structure. - * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match. - * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR. - */ - arm_status arm_mat_inverse_f32( - const arm_matrix_instance_f32 * src, - arm_matrix_instance_f32 * dst); - - - /** - * @brief Floating-point matrix inverse. - * @param[in] src points to the instance of the input floating-point matrix structure. - * @param[out] dst points to the instance of the output floating-point matrix structure. - * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match. - * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR. - */ - arm_status arm_mat_inverse_f64( - const arm_matrix_instance_f64 * src, - arm_matrix_instance_f64 * dst); - - - - /** - * @ingroup groupController - */ - - /** - * @defgroup clarke Vector Clarke Transform - * Forward Clarke transform converts the instantaneous stator phases into a two-coordinate time invariant vector. - * Generally the Clarke transform uses three-phase currents <code>Ia, Ib and Ic</code> to calculate currents - * in the two-phase orthogonal stator axis <code>Ialpha</code> and <code>Ibeta</code>. - * When <code>Ialpha</code> is superposed with <code>Ia</code> as shown in the figure below - * \image html clarke.gif Stator current space vector and its components in (a,b). - * and <code>Ia + Ib + Ic = 0</code>, in this condition <code>Ialpha</code> and <code>Ibeta</code> - * can be calculated using only <code>Ia</code> and <code>Ib</code>. - * - * The function operates on a single sample of data and each call to the function returns the processed output. - * The library provides separate functions for Q31 and floating-point data types. - * \par Algorithm - * \image html clarkeFormula.gif - * where <code>Ia</code> and <code>Ib</code> are the instantaneous stator phases and - * <code>pIalpha</code> and <code>pIbeta</code> are the two coordinates of time invariant vector. - * \par Fixed-Point Behavior - * Care must be taken when using the Q31 version of the Clarke transform. - * In particular, the overflow and saturation behavior of the accumulator used must be considered. - * Refer to the function specific documentation below for usage guidelines. - */ - - /** - * @addtogroup clarke - * @{ - */ - - /** - * - * @brief Floating-point Clarke transform - * @param[in] Ia input three-phase coordinate <code>a</code> - * @param[in] Ib input three-phase coordinate <code>b</code> - * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha - * @param[out] pIbeta points to output two-phase orthogonal vector axis beta - */ - static __INLINE void arm_clarke_f32( - float32_t Ia, - float32_t Ib, - float32_t * pIalpha, - float32_t * pIbeta) - { - /* Calculate pIalpha using the equation, pIalpha = Ia */ - *pIalpha = Ia; - - /* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */ - *pIbeta = ((float32_t) 0.57735026919 * Ia + (float32_t) 1.15470053838 * Ib); - } - - - /** - * @brief Clarke transform for Q31 version - * @param[in] Ia input three-phase coordinate <code>a</code> - * @param[in] Ib input three-phase coordinate <code>b</code> - * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha - * @param[out] pIbeta points to output two-phase orthogonal vector axis beta - * - * <b>Scaling and Overflow Behavior:</b> - * \par - * The function is implemented using an internal 32-bit accumulator. - * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. - * There is saturation on the addition, hence there is no risk of overflow. - */ - static __INLINE void arm_clarke_q31( - q31_t Ia, - q31_t Ib, - q31_t * pIalpha, - q31_t * pIbeta) - { - q31_t product1, product2; /* Temporary variables used to store intermediate results */ - - /* Calculating pIalpha from Ia by equation pIalpha = Ia */ - *pIalpha = Ia; - - /* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */ - product1 = (q31_t) (((q63_t) Ia * 0x24F34E8B) >> 30); - - /* Intermediate product is calculated by (2/sqrt(3) * Ib) */ - product2 = (q31_t) (((q63_t) Ib * 0x49E69D16) >> 30); - - /* pIbeta is calculated by adding the intermediate products */ - *pIbeta = __QADD(product1, product2); - } - - /** - * @} end of clarke group - */ - - /** - * @brief Converts the elements of the Q7 vector to Q31 vector. - * @param[in] pSrc input pointer - * @param[out] pDst output pointer - * @param[in] blockSize number of samples to process - */ - void arm_q7_to_q31( - q7_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - - - - /** - * @ingroup groupController - */ - - /** - * @defgroup inv_clarke Vector Inverse Clarke Transform - * Inverse Clarke transform converts the two-coordinate time invariant vector into instantaneous stator phases. - * - * The function operates on a single sample of data and each call to the function returns the processed output. - * The library provides separate functions for Q31 and floating-point data types. - * \par Algorithm - * \image html clarkeInvFormula.gif - * where <code>pIa</code> and <code>pIb</code> are the instantaneous stator phases and - * <code>Ialpha</code> and <code>Ibeta</code> are the two coordinates of time invariant vector. - * \par Fixed-Point Behavior - * Care must be taken when using the Q31 version of the Clarke transform. - * In particular, the overflow and saturation behavior of the accumulator used must be considered. - * Refer to the function specific documentation below for usage guidelines. - */ - - /** - * @addtogroup inv_clarke - * @{ - */ - - /** - * @brief Floating-point Inverse Clarke transform - * @param[in] Ialpha input two-phase orthogonal vector axis alpha - * @param[in] Ibeta input two-phase orthogonal vector axis beta - * @param[out] pIa points to output three-phase coordinate <code>a</code> - * @param[out] pIb points to output three-phase coordinate <code>b</code> - */ - static __INLINE void arm_inv_clarke_f32( - float32_t Ialpha, - float32_t Ibeta, - float32_t * pIa, - float32_t * pIb) - { - /* Calculating pIa from Ialpha by equation pIa = Ialpha */ - *pIa = Ialpha; - - /* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */ - *pIb = -0.5f * Ialpha + 0.8660254039f * Ibeta; - } - - - /** - * @brief Inverse Clarke transform for Q31 version - * @param[in] Ialpha input two-phase orthogonal vector axis alpha - * @param[in] Ibeta input two-phase orthogonal vector axis beta - * @param[out] pIa points to output three-phase coordinate <code>a</code> - * @param[out] pIb points to output three-phase coordinate <code>b</code> - * - * <b>Scaling and Overflow Behavior:</b> - * \par - * The function is implemented using an internal 32-bit accumulator. - * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. - * There is saturation on the subtraction, hence there is no risk of overflow. - */ - static __INLINE void arm_inv_clarke_q31( - q31_t Ialpha, - q31_t Ibeta, - q31_t * pIa, - q31_t * pIb) - { - q31_t product1, product2; /* Temporary variables used to store intermediate results */ - - /* Calculating pIa from Ialpha by equation pIa = Ialpha */ - *pIa = Ialpha; - - /* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */ - product1 = (q31_t) (((q63_t) (Ialpha) * (0x40000000)) >> 31); - - /* Intermediate product is calculated by (1/sqrt(3) * pIb) */ - product2 = (q31_t) (((q63_t) (Ibeta) * (0x6ED9EBA1)) >> 31); - - /* pIb is calculated by subtracting the products */ - *pIb = __QSUB(product2, product1); - } - - /** - * @} end of inv_clarke group - */ - - /** - * @brief Converts the elements of the Q7 vector to Q15 vector. - * @param[in] pSrc input pointer - * @param[out] pDst output pointer - * @param[in] blockSize number of samples to process - */ - void arm_q7_to_q15( - q7_t * pSrc, - q15_t * pDst, - uint32_t blockSize); - - - - /** - * @ingroup groupController - */ - - /** - * @defgroup park Vector Park Transform - * - * Forward Park transform converts the input two-coordinate vector to flux and torque components. - * The Park transform can be used to realize the transformation of the <code>Ialpha</code> and the <code>Ibeta</code> currents - * from the stationary to the moving reference frame and control the spatial relationship between - * the stator vector current and rotor flux vector. - * If we consider the d axis aligned with the rotor flux, the diagram below shows the - * current vector and the relationship from the two reference frames: - * \image html park.gif "Stator current space vector and its component in (a,b) and in the d,q rotating reference frame" - * - * The function operates on a single sample of data and each call to the function returns the processed output. - * The library provides separate functions for Q31 and floating-point data types. - * \par Algorithm - * \image html parkFormula.gif - * where <code>Ialpha</code> and <code>Ibeta</code> are the stator vector components, - * <code>pId</code> and <code>pIq</code> are rotor vector components and <code>cosVal</code> and <code>sinVal</code> are the - * cosine and sine values of theta (rotor flux position). - * \par Fixed-Point Behavior - * Care must be taken when using the Q31 version of the Park transform. - * In particular, the overflow and saturation behavior of the accumulator used must be considered. - * Refer to the function specific documentation below for usage guidelines. - */ - - /** - * @addtogroup park - * @{ - */ - - /** - * @brief Floating-point Park transform - * @param[in] Ialpha input two-phase vector coordinate alpha - * @param[in] Ibeta input two-phase vector coordinate beta - * @param[out] pId points to output rotor reference frame d - * @param[out] pIq points to output rotor reference frame q - * @param[in] sinVal sine value of rotation angle theta - * @param[in] cosVal cosine value of rotation angle theta - * - * The function implements the forward Park transform. - * - */ - static __INLINE void arm_park_f32( - float32_t Ialpha, - float32_t Ibeta, - float32_t * pId, - float32_t * pIq, - float32_t sinVal, - float32_t cosVal) - { - /* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */ - *pId = Ialpha * cosVal + Ibeta * sinVal; - - /* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */ - *pIq = -Ialpha * sinVal + Ibeta * cosVal; - } - - - /** - * @brief Park transform for Q31 version - * @param[in] Ialpha input two-phase vector coordinate alpha - * @param[in] Ibeta input two-phase vector coordinate beta - * @param[out] pId points to output rotor reference frame d - * @param[out] pIq points to output rotor reference frame q - * @param[in] sinVal sine value of rotation angle theta - * @param[in] cosVal cosine value of rotation angle theta - * - * <b>Scaling and Overflow Behavior:</b> - * \par - * The function is implemented using an internal 32-bit accumulator. - * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. - * There is saturation on the addition and subtraction, hence there is no risk of overflow. - */ - static __INLINE void arm_park_q31( - q31_t Ialpha, - q31_t Ibeta, - q31_t * pId, - q31_t * pIq, - q31_t sinVal, - q31_t cosVal) - { - q31_t product1, product2; /* Temporary variables used to store intermediate results */ - q31_t product3, product4; /* Temporary variables used to store intermediate results */ - - /* Intermediate product is calculated by (Ialpha * cosVal) */ - product1 = (q31_t) (((q63_t) (Ialpha) * (cosVal)) >> 31); - - /* Intermediate product is calculated by (Ibeta * sinVal) */ - product2 = (q31_t) (((q63_t) (Ibeta) * (sinVal)) >> 31); - - - /* Intermediate product is calculated by (Ialpha * sinVal) */ - product3 = (q31_t) (((q63_t) (Ialpha) * (sinVal)) >> 31); - - /* Intermediate product is calculated by (Ibeta * cosVal) */ - product4 = (q31_t) (((q63_t) (Ibeta) * (cosVal)) >> 31); - - /* Calculate pId by adding the two intermediate products 1 and 2 */ - *pId = __QADD(product1, product2); - - /* Calculate pIq by subtracting the two intermediate products 3 from 4 */ - *pIq = __QSUB(product4, product3); - } - - /** - * @} end of park group - */ - - /** - * @brief Converts the elements of the Q7 vector to floating-point vector. - * @param[in] pSrc is input pointer - * @param[out] pDst is output pointer - * @param[in] blockSize is the number of samples to process - */ - void arm_q7_to_float( - q7_t * pSrc, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @ingroup groupController - */ - - /** - * @defgroup inv_park Vector Inverse Park transform - * Inverse Park transform converts the input flux and torque components to two-coordinate vector. - * - * The function operates on a single sample of data and each call to the function returns the processed output. - * The library provides separate functions for Q31 and floating-point data types. - * \par Algorithm - * \image html parkInvFormula.gif - * where <code>pIalpha</code> and <code>pIbeta</code> are the stator vector components, - * <code>Id</code> and <code>Iq</code> are rotor vector components and <code>cosVal</code> and <code>sinVal</code> are the - * cosine and sine values of theta (rotor flux position). - * \par Fixed-Point Behavior - * Care must be taken when using the Q31 version of the Park transform. - * In particular, the overflow and saturation behavior of the accumulator used must be considered. - * Refer to the function specific documentation below for usage guidelines. - */ - - /** - * @addtogroup inv_park - * @{ - */ - - /** - * @brief Floating-point Inverse Park transform - * @param[in] Id input coordinate of rotor reference frame d - * @param[in] Iq input coordinate of rotor reference frame q - * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha - * @param[out] pIbeta points to output two-phase orthogonal vector axis beta - * @param[in] sinVal sine value of rotation angle theta - * @param[in] cosVal cosine value of rotation angle theta - */ - static __INLINE void arm_inv_park_f32( - float32_t Id, - float32_t Iq, - float32_t * pIalpha, - float32_t * pIbeta, - float32_t sinVal, - float32_t cosVal) - { - /* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */ - *pIalpha = Id * cosVal - Iq * sinVal; - - /* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */ - *pIbeta = Id * sinVal + Iq * cosVal; - } - - - /** - * @brief Inverse Park transform for Q31 version - * @param[in] Id input coordinate of rotor reference frame d - * @param[in] Iq input coordinate of rotor reference frame q - * @param[out] pIalpha points to output two-phase orthogonal vector axis alpha - * @param[out] pIbeta points to output two-phase orthogonal vector axis beta - * @param[in] sinVal sine value of rotation angle theta - * @param[in] cosVal cosine value of rotation angle theta - * - * <b>Scaling and Overflow Behavior:</b> - * \par - * The function is implemented using an internal 32-bit accumulator. - * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format. - * There is saturation on the addition, hence there is no risk of overflow. - */ - static __INLINE void arm_inv_park_q31( - q31_t Id, - q31_t Iq, - q31_t * pIalpha, - q31_t * pIbeta, - q31_t sinVal, - q31_t cosVal) - { - q31_t product1, product2; /* Temporary variables used to store intermediate results */ - q31_t product3, product4; /* Temporary variables used to store intermediate results */ - - /* Intermediate product is calculated by (Id * cosVal) */ - product1 = (q31_t) (((q63_t) (Id) * (cosVal)) >> 31); - - /* Intermediate product is calculated by (Iq * sinVal) */ - product2 = (q31_t) (((q63_t) (Iq) * (sinVal)) >> 31); - - - /* Intermediate product is calculated by (Id * sinVal) */ - product3 = (q31_t) (((q63_t) (Id) * (sinVal)) >> 31); - - /* Intermediate product is calculated by (Iq * cosVal) */ - product4 = (q31_t) (((q63_t) (Iq) * (cosVal)) >> 31); - - /* Calculate pIalpha by using the two intermediate products 1 and 2 */ - *pIalpha = __QSUB(product1, product2); - - /* Calculate pIbeta by using the two intermediate products 3 and 4 */ - *pIbeta = __QADD(product4, product3); - } - - /** - * @} end of Inverse park group - */ - - - /** - * @brief Converts the elements of the Q31 vector to floating-point vector. - * @param[in] pSrc is input pointer - * @param[out] pDst is output pointer - * @param[in] blockSize is the number of samples to process - */ - void arm_q31_to_float( - q31_t * pSrc, - float32_t * pDst, - uint32_t blockSize); - - /** - * @ingroup groupInterpolation - */ - - /** - * @defgroup LinearInterpolate Linear Interpolation - * - * Linear interpolation is a method of curve fitting using linear polynomials. - * Linear interpolation works by effectively drawing a straight line between two neighboring samples and returning the appropriate point along that line - * - * \par - * \image html LinearInterp.gif "Linear interpolation" - * - * \par - * A Linear Interpolate function calculates an output value(y), for the input(x) - * using linear interpolation of the input values x0, x1( nearest input values) and the output values y0 and y1(nearest output values) - * - * \par Algorithm: - * <pre> - * y = y0 + (x - x0) * ((y1 - y0)/(x1-x0)) - * where x0, x1 are nearest values of input x - * y0, y1 are nearest values to output y - * </pre> - * - * \par - * This set of functions implements Linear interpolation process - * for Q7, Q15, Q31, and floating-point data types. The functions operate on a single - * sample of data and each call to the function returns a single processed value. - * <code>S</code> points to an instance of the Linear Interpolate function data structure. - * <code>x</code> is the input sample value. The functions returns the output value. - * - * \par - * if x is outside of the table boundary, Linear interpolation returns first value of the table - * if x is below input range and returns last value of table if x is above range. - */ - - /** - * @addtogroup LinearInterpolate - * @{ - */ - - /** - * @brief Process function for the floating-point Linear Interpolation Function. - * @param[in,out] S is an instance of the floating-point Linear Interpolation structure - * @param[in] x input sample to process - * @return y processed output sample. - * - */ - static __INLINE float32_t arm_linear_interp_f32( - arm_linear_interp_instance_f32 * S, - float32_t x) - { - float32_t y; - float32_t x0, x1; /* Nearest input values */ - float32_t y0, y1; /* Nearest output values */ - float32_t xSpacing = S->xSpacing; /* spacing between input values */ - int32_t i; /* Index variable */ - float32_t *pYData = S->pYData; /* pointer to output table */ - - /* Calculation of index */ - i = (int32_t) ((x - S->x1) / xSpacing); - - if(i < 0) - { - /* Iniatilize output for below specified range as least output value of table */ - y = pYData[0]; - } - else if((uint32_t)i >= S->nValues) - { - /* Iniatilize output for above specified range as last output value of table */ - y = pYData[S->nValues - 1]; - } - else - { - /* Calculation of nearest input values */ - x0 = S->x1 + i * xSpacing; - x1 = S->x1 + (i + 1) * xSpacing; - - /* Read of nearest output values */ - y0 = pYData[i]; - y1 = pYData[i + 1]; - - /* Calculation of output */ - y = y0 + (x - x0) * ((y1 - y0) / (x1 - x0)); - - } - - /* returns output value */ - return (y); - } - - - /** - * - * @brief Process function for the Q31 Linear Interpolation Function. - * @param[in] pYData pointer to Q31 Linear Interpolation table - * @param[in] x input sample to process - * @param[in] nValues number of table values - * @return y processed output sample. - * - * \par - * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part. - * This function can support maximum of table size 2^12. - * - */ - static __INLINE q31_t arm_linear_interp_q31( - q31_t * pYData, - q31_t x, - uint32_t nValues) - { - q31_t y; /* output */ - q31_t y0, y1; /* Nearest output values */ - q31_t fract; /* fractional part */ - int32_t index; /* Index to read nearest output values */ - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - index = ((x & (q31_t)0xFFF00000) >> 20); - - if(index >= (int32_t)(nValues - 1)) - { - return (pYData[nValues - 1]); - } - else if(index < 0) - { - return (pYData[0]); - } - else - { - /* 20 bits for the fractional part */ - /* shift left by 11 to keep fract in 1.31 format */ - fract = (x & 0x000FFFFF) << 11; - - /* Read two nearest output values from the index in 1.31(q31) format */ - y0 = pYData[index]; - y1 = pYData[index + 1]; - - /* Calculation of y0 * (1-fract) and y is in 2.30 format */ - y = ((q31_t) ((q63_t) y0 * (0x7FFFFFFF - fract) >> 32)); - - /* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */ - y += ((q31_t) (((q63_t) y1 * fract) >> 32)); - - /* Convert y to 1.31 format */ - return (y << 1u); - } - } - - - /** - * - * @brief Process function for the Q15 Linear Interpolation Function. - * @param[in] pYData pointer to Q15 Linear Interpolation table - * @param[in] x input sample to process - * @param[in] nValues number of table values - * @return y processed output sample. - * - * \par - * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part. - * This function can support maximum of table size 2^12. - * - */ - static __INLINE q15_t arm_linear_interp_q15( - q15_t * pYData, - q31_t x, - uint32_t nValues) - { - q63_t y; /* output */ - q15_t y0, y1; /* Nearest output values */ - q31_t fract; /* fractional part */ - int32_t index; /* Index to read nearest output values */ - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - index = ((x & (int32_t)0xFFF00000) >> 20); - - if(index >= (int32_t)(nValues - 1)) - { - return (pYData[nValues - 1]); - } - else if(index < 0) - { - return (pYData[0]); - } - else - { - /* 20 bits for the fractional part */ - /* fract is in 12.20 format */ - fract = (x & 0x000FFFFF); - - /* Read two nearest output values from the index */ - y0 = pYData[index]; - y1 = pYData[index + 1]; - - /* Calculation of y0 * (1-fract) and y is in 13.35 format */ - y = ((q63_t) y0 * (0xFFFFF - fract)); - - /* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */ - y += ((q63_t) y1 * (fract)); - - /* convert y to 1.15 format */ - return (q15_t) (y >> 20); - } - } - - - /** - * - * @brief Process function for the Q7 Linear Interpolation Function. - * @param[in] pYData pointer to Q7 Linear Interpolation table - * @param[in] x input sample to process - * @param[in] nValues number of table values - * @return y processed output sample. - * - * \par - * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part. - * This function can support maximum of table size 2^12. - */ - static __INLINE q7_t arm_linear_interp_q7( - q7_t * pYData, - q31_t x, - uint32_t nValues) - { - q31_t y; /* output */ - q7_t y0, y1; /* Nearest output values */ - q31_t fract; /* fractional part */ - uint32_t index; /* Index to read nearest output values */ - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - if (x < 0) - { - return (pYData[0]); - } - index = (x >> 20) & 0xfff; - - if(index >= (nValues - 1)) - { - return (pYData[nValues - 1]); - } - else - { - /* 20 bits for the fractional part */ - /* fract is in 12.20 format */ - fract = (x & 0x000FFFFF); - - /* Read two nearest output values from the index and are in 1.7(q7) format */ - y0 = pYData[index]; - y1 = pYData[index + 1]; - - /* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */ - y = ((y0 * (0xFFFFF - fract))); - - /* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */ - y += (y1 * fract); - - /* convert y to 1.7(q7) format */ - return (q7_t) (y >> 20); - } - } - - /** - * @} end of LinearInterpolate group - */ - - /** - * @brief Fast approximation to the trigonometric sine function for floating-point data. - * @param[in] x input value in radians. - * @return sin(x). - */ - float32_t arm_sin_f32( - float32_t x); - - - /** - * @brief Fast approximation to the trigonometric sine function for Q31 data. - * @param[in] x Scaled input value in radians. - * @return sin(x). - */ - q31_t arm_sin_q31( - q31_t x); - - - /** - * @brief Fast approximation to the trigonometric sine function for Q15 data. - * @param[in] x Scaled input value in radians. - * @return sin(x). - */ - q15_t arm_sin_q15( - q15_t x); - - - /** - * @brief Fast approximation to the trigonometric cosine function for floating-point data. - * @param[in] x input value in radians. - * @return cos(x). - */ - float32_t arm_cos_f32( - float32_t x); - - - /** - * @brief Fast approximation to the trigonometric cosine function for Q31 data. - * @param[in] x Scaled input value in radians. - * @return cos(x). - */ - q31_t arm_cos_q31( - q31_t x); - - - /** - * @brief Fast approximation to the trigonometric cosine function for Q15 data. - * @param[in] x Scaled input value in radians. - * @return cos(x). - */ - q15_t arm_cos_q15( - q15_t x); - - - /** - * @ingroup groupFastMath - */ - - - /** - * @defgroup SQRT Square Root - * - * Computes the square root of a number. - * There are separate functions for Q15, Q31, and floating-point data types. - * The square root function is computed using the Newton-Raphson algorithm. - * This is an iterative algorithm of the form: - * <pre> - * x1 = x0 - f(x0)/f'(x0) - * </pre> - * where <code>x1</code> is the current estimate, - * <code>x0</code> is the previous estimate, and - * <code>f'(x0)</code> is the derivative of <code>f()</code> evaluated at <code>x0</code>. - * For the square root function, the algorithm reduces to: - * <pre> - * x0 = in/2 [initial guess] - * x1 = 1/2 * ( x0 + in / x0) [each iteration] - * </pre> - */ - - - /** - * @addtogroup SQRT - * @{ - */ - - /** - * @brief Floating-point square root function. - * @param[in] in input value. - * @param[out] pOut square root of input value. - * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if - * <code>in</code> is negative value and returns zero output for negative values. - */ - static __INLINE arm_status arm_sqrt_f32( - float32_t in, - float32_t * pOut) - { - if(in >= 0.0f) - { - -#if (__FPU_USED == 1) && defined ( __CC_ARM ) - *pOut = __sqrtf(in); -#elif (__FPU_USED == 1) && (defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)) - *pOut = __builtin_sqrtf(in); -#elif (__FPU_USED == 1) && defined(__GNUC__) - *pOut = __builtin_sqrtf(in); -#elif (__FPU_USED == 1) && defined ( __ICCARM__ ) && (__VER__ >= 6040000) - __ASM("VSQRT.F32 %0,%1" : "=t"(*pOut) : "t"(in)); -#else - *pOut = sqrtf(in); -#endif - - return (ARM_MATH_SUCCESS); - } - else - { - *pOut = 0.0f; - return (ARM_MATH_ARGUMENT_ERROR); - } - } - - - /** - * @brief Q31 square root function. - * @param[in] in input value. The range of the input value is [0 +1) or 0x00000000 to 0x7FFFFFFF. - * @param[out] pOut square root of input value. - * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if - * <code>in</code> is negative value and returns zero output for negative values. - */ - arm_status arm_sqrt_q31( - q31_t in, - q31_t * pOut); - - - /** - * @brief Q15 square root function. - * @param[in] in input value. The range of the input value is [0 +1) or 0x0000 to 0x7FFF. - * @param[out] pOut square root of input value. - * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if - * <code>in</code> is negative value and returns zero output for negative values. - */ - arm_status arm_sqrt_q15( - q15_t in, - q15_t * pOut); - - /** - * @} end of SQRT group - */ - - - /** - * @brief floating-point Circular write function. - */ - static __INLINE void arm_circularWrite_f32( - int32_t * circBuffer, - int32_t L, - uint16_t * writeOffset, - int32_t bufferInc, - const int32_t * src, - int32_t srcInc, - uint32_t blockSize) - { - uint32_t i = 0u; - int32_t wOffset; - - /* Copy the value of Index pointer that points - * to the current location where the input samples to be copied */ - wOffset = *writeOffset; - - /* Loop over the blockSize */ - i = blockSize; - - while(i > 0u) - { - /* copy the input sample to the circular buffer */ - circBuffer[wOffset] = *src; - - /* Update the input pointer */ - src += srcInc; - - /* Circularly update wOffset. Watch out for positive and negative value */ - wOffset += bufferInc; - if(wOffset >= L) - wOffset -= L; - - /* Decrement the loop counter */ - i--; - } - - /* Update the index pointer */ - *writeOffset = (uint16_t)wOffset; - } - - - - /** - * @brief floating-point Circular Read function. - */ - static __INLINE void arm_circularRead_f32( - int32_t * circBuffer, - int32_t L, - int32_t * readOffset, - int32_t bufferInc, - int32_t * dst, - int32_t * dst_base, - int32_t dst_length, - int32_t dstInc, - uint32_t blockSize) - { - uint32_t i = 0u; - int32_t rOffset, dst_end; - - /* Copy the value of Index pointer that points - * to the current location from where the input samples to be read */ - rOffset = *readOffset; - dst_end = (int32_t) (dst_base + dst_length); - - /* Loop over the blockSize */ - i = blockSize; - - while(i > 0u) - { - /* copy the sample from the circular buffer to the destination buffer */ - *dst = circBuffer[rOffset]; - - /* Update the input pointer */ - dst += dstInc; - - if(dst == (int32_t *) dst_end) - { - dst = dst_base; - } - - /* Circularly update rOffset. Watch out for positive and negative value */ - rOffset += bufferInc; - - if(rOffset >= L) - { - rOffset -= L; - } - - /* Decrement the loop counter */ - i--; - } - - /* Update the index pointer */ - *readOffset = rOffset; - } - - - /** - * @brief Q15 Circular write function. - */ - static __INLINE void arm_circularWrite_q15( - q15_t * circBuffer, - int32_t L, - uint16_t * writeOffset, - int32_t bufferInc, - const q15_t * src, - int32_t srcInc, - uint32_t blockSize) - { - uint32_t i = 0u; - int32_t wOffset; - - /* Copy the value of Index pointer that points - * to the current location where the input samples to be copied */ - wOffset = *writeOffset; - - /* Loop over the blockSize */ - i = blockSize; - - while(i > 0u) - { - /* copy the input sample to the circular buffer */ - circBuffer[wOffset] = *src; - - /* Update the input pointer */ - src += srcInc; - - /* Circularly update wOffset. Watch out for positive and negative value */ - wOffset += bufferInc; - if(wOffset >= L) - wOffset -= L; - - /* Decrement the loop counter */ - i--; - } - - /* Update the index pointer */ - *writeOffset = (uint16_t)wOffset; - } - - - /** - * @brief Q15 Circular Read function. - */ - static __INLINE void arm_circularRead_q15( - q15_t * circBuffer, - int32_t L, - int32_t * readOffset, - int32_t bufferInc, - q15_t * dst, - q15_t * dst_base, - int32_t dst_length, - int32_t dstInc, - uint32_t blockSize) - { - uint32_t i = 0; - int32_t rOffset, dst_end; - - /* Copy the value of Index pointer that points - * to the current location from where the input samples to be read */ - rOffset = *readOffset; - - dst_end = (int32_t) (dst_base + dst_length); - - /* Loop over the blockSize */ - i = blockSize; - - while(i > 0u) - { - /* copy the sample from the circular buffer to the destination buffer */ - *dst = circBuffer[rOffset]; - - /* Update the input pointer */ - dst += dstInc; - - if(dst == (q15_t *) dst_end) - { - dst = dst_base; - } - - /* Circularly update wOffset. Watch out for positive and negative value */ - rOffset += bufferInc; - - if(rOffset >= L) - { - rOffset -= L; - } - - /* Decrement the loop counter */ - i--; - } - - /* Update the index pointer */ - *readOffset = rOffset; - } - - - /** - * @brief Q7 Circular write function. - */ - static __INLINE void arm_circularWrite_q7( - q7_t * circBuffer, - int32_t L, - uint16_t * writeOffset, - int32_t bufferInc, - const q7_t * src, - int32_t srcInc, - uint32_t blockSize) - { - uint32_t i = 0u; - int32_t wOffset; - - /* Copy the value of Index pointer that points - * to the current location where the input samples to be copied */ - wOffset = *writeOffset; - - /* Loop over the blockSize */ - i = blockSize; - - while(i > 0u) - { - /* copy the input sample to the circular buffer */ - circBuffer[wOffset] = *src; - - /* Update the input pointer */ - src += srcInc; - - /* Circularly update wOffset. Watch out for positive and negative value */ - wOffset += bufferInc; - if(wOffset >= L) - wOffset -= L; - - /* Decrement the loop counter */ - i--; - } - - /* Update the index pointer */ - *writeOffset = (uint16_t)wOffset; - } - - - /** - * @brief Q7 Circular Read function. - */ - static __INLINE void arm_circularRead_q7( - q7_t * circBuffer, - int32_t L, - int32_t * readOffset, - int32_t bufferInc, - q7_t * dst, - q7_t * dst_base, - int32_t dst_length, - int32_t dstInc, - uint32_t blockSize) - { - uint32_t i = 0; - int32_t rOffset, dst_end; - - /* Copy the value of Index pointer that points - * to the current location from where the input samples to be read */ - rOffset = *readOffset; - - dst_end = (int32_t) (dst_base + dst_length); - - /* Loop over the blockSize */ - i = blockSize; - - while(i > 0u) - { - /* copy the sample from the circular buffer to the destination buffer */ - *dst = circBuffer[rOffset]; - - /* Update the input pointer */ - dst += dstInc; - - if(dst == (q7_t *) dst_end) - { - dst = dst_base; - } - - /* Circularly update rOffset. Watch out for positive and negative value */ - rOffset += bufferInc; - - if(rOffset >= L) - { - rOffset -= L; - } - - /* Decrement the loop counter */ - i--; - } - - /* Update the index pointer */ - *readOffset = rOffset; - } - - - /** - * @brief Sum of the squares of the elements of a Q31 vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_power_q31( - q31_t * pSrc, - uint32_t blockSize, - q63_t * pResult); - - - /** - * @brief Sum of the squares of the elements of a floating-point vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_power_f32( - float32_t * pSrc, - uint32_t blockSize, - float32_t * pResult); - - - /** - * @brief Sum of the squares of the elements of a Q15 vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_power_q15( - q15_t * pSrc, - uint32_t blockSize, - q63_t * pResult); - - - /** - * @brief Sum of the squares of the elements of a Q7 vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_power_q7( - q7_t * pSrc, - uint32_t blockSize, - q31_t * pResult); - - - /** - * @brief Mean value of a Q7 vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_mean_q7( - q7_t * pSrc, - uint32_t blockSize, - q7_t * pResult); - - - /** - * @brief Mean value of a Q15 vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_mean_q15( - q15_t * pSrc, - uint32_t blockSize, - q15_t * pResult); - - - /** - * @brief Mean value of a Q31 vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_mean_q31( - q31_t * pSrc, - uint32_t blockSize, - q31_t * pResult); - - - /** - * @brief Mean value of a floating-point vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_mean_f32( - float32_t * pSrc, - uint32_t blockSize, - float32_t * pResult); - - - /** - * @brief Variance of the elements of a floating-point vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_var_f32( - float32_t * pSrc, - uint32_t blockSize, - float32_t * pResult); - - - /** - * @brief Variance of the elements of a Q31 vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_var_q31( - q31_t * pSrc, - uint32_t blockSize, - q31_t * pResult); - - - /** - * @brief Variance of the elements of a Q15 vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_var_q15( - q15_t * pSrc, - uint32_t blockSize, - q15_t * pResult); - - - /** - * @brief Root Mean Square of the elements of a floating-point vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_rms_f32( - float32_t * pSrc, - uint32_t blockSize, - float32_t * pResult); - - - /** - * @brief Root Mean Square of the elements of a Q31 vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_rms_q31( - q31_t * pSrc, - uint32_t blockSize, - q31_t * pResult); - - - /** - * @brief Root Mean Square of the elements of a Q15 vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_rms_q15( - q15_t * pSrc, - uint32_t blockSize, - q15_t * pResult); - - - /** - * @brief Standard deviation of the elements of a floating-point vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_std_f32( - float32_t * pSrc, - uint32_t blockSize, - float32_t * pResult); - - - /** - * @brief Standard deviation of the elements of a Q31 vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_std_q31( - q31_t * pSrc, - uint32_t blockSize, - q31_t * pResult); - - - /** - * @brief Standard deviation of the elements of a Q15 vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output value. - */ - void arm_std_q15( - q15_t * pSrc, - uint32_t blockSize, - q15_t * pResult); - - - /** - * @brief Floating-point complex magnitude - * @param[in] pSrc points to the complex input vector - * @param[out] pDst points to the real output vector - * @param[in] numSamples number of complex samples in the input vector - */ - void arm_cmplx_mag_f32( - float32_t * pSrc, - float32_t * pDst, - uint32_t numSamples); - - - /** - * @brief Q31 complex magnitude - * @param[in] pSrc points to the complex input vector - * @param[out] pDst points to the real output vector - * @param[in] numSamples number of complex samples in the input vector - */ - void arm_cmplx_mag_q31( - q31_t * pSrc, - q31_t * pDst, - uint32_t numSamples); - - - /** - * @brief Q15 complex magnitude - * @param[in] pSrc points to the complex input vector - * @param[out] pDst points to the real output vector - * @param[in] numSamples number of complex samples in the input vector - */ - void arm_cmplx_mag_q15( - q15_t * pSrc, - q15_t * pDst, - uint32_t numSamples); - - - /** - * @brief Q15 complex dot product - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[in] numSamples number of complex samples in each vector - * @param[out] realResult real part of the result returned here - * @param[out] imagResult imaginary part of the result returned here - */ - void arm_cmplx_dot_prod_q15( - q15_t * pSrcA, - q15_t * pSrcB, - uint32_t numSamples, - q31_t * realResult, - q31_t * imagResult); - - - /** - * @brief Q31 complex dot product - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[in] numSamples number of complex samples in each vector - * @param[out] realResult real part of the result returned here - * @param[out] imagResult imaginary part of the result returned here - */ - void arm_cmplx_dot_prod_q31( - q31_t * pSrcA, - q31_t * pSrcB, - uint32_t numSamples, - q63_t * realResult, - q63_t * imagResult); - - - /** - * @brief Floating-point complex dot product - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[in] numSamples number of complex samples in each vector - * @param[out] realResult real part of the result returned here - * @param[out] imagResult imaginary part of the result returned here - */ - void arm_cmplx_dot_prod_f32( - float32_t * pSrcA, - float32_t * pSrcB, - uint32_t numSamples, - float32_t * realResult, - float32_t * imagResult); - - - /** - * @brief Q15 complex-by-real multiplication - * @param[in] pSrcCmplx points to the complex input vector - * @param[in] pSrcReal points to the real input vector - * @param[out] pCmplxDst points to the complex output vector - * @param[in] numSamples number of samples in each vector - */ - void arm_cmplx_mult_real_q15( - q15_t * pSrcCmplx, - q15_t * pSrcReal, - q15_t * pCmplxDst, - uint32_t numSamples); - - - /** - * @brief Q31 complex-by-real multiplication - * @param[in] pSrcCmplx points to the complex input vector - * @param[in] pSrcReal points to the real input vector - * @param[out] pCmplxDst points to the complex output vector - * @param[in] numSamples number of samples in each vector - */ - void arm_cmplx_mult_real_q31( - q31_t * pSrcCmplx, - q31_t * pSrcReal, - q31_t * pCmplxDst, - uint32_t numSamples); - - - /** - * @brief Floating-point complex-by-real multiplication - * @param[in] pSrcCmplx points to the complex input vector - * @param[in] pSrcReal points to the real input vector - * @param[out] pCmplxDst points to the complex output vector - * @param[in] numSamples number of samples in each vector - */ - void arm_cmplx_mult_real_f32( - float32_t * pSrcCmplx, - float32_t * pSrcReal, - float32_t * pCmplxDst, - uint32_t numSamples); - - - /** - * @brief Minimum value of a Q7 vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] result is output pointer - * @param[in] index is the array index of the minimum value in the input buffer. - */ - void arm_min_q7( - q7_t * pSrc, - uint32_t blockSize, - q7_t * result, - uint32_t * index); - - - /** - * @brief Minimum value of a Q15 vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output pointer - * @param[in] pIndex is the array index of the minimum value in the input buffer. - */ - void arm_min_q15( - q15_t * pSrc, - uint32_t blockSize, - q15_t * pResult, - uint32_t * pIndex); - - - /** - * @brief Minimum value of a Q31 vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output pointer - * @param[out] pIndex is the array index of the minimum value in the input buffer. - */ - void arm_min_q31( - q31_t * pSrc, - uint32_t blockSize, - q31_t * pResult, - uint32_t * pIndex); - - - /** - * @brief Minimum value of a floating-point vector. - * @param[in] pSrc is input pointer - * @param[in] blockSize is the number of samples to process - * @param[out] pResult is output pointer - * @param[out] pIndex is the array index of the minimum value in the input buffer. - */ - void arm_min_f32( - float32_t * pSrc, - uint32_t blockSize, - float32_t * pResult, - uint32_t * pIndex); - - -/** - * @brief Maximum value of a Q7 vector. - * @param[in] pSrc points to the input buffer - * @param[in] blockSize length of the input vector - * @param[out] pResult maximum value returned here - * @param[out] pIndex index of maximum value returned here - */ - void arm_max_q7( - q7_t * pSrc, - uint32_t blockSize, - q7_t * pResult, - uint32_t * pIndex); - - -/** - * @brief Maximum value of a Q15 vector. - * @param[in] pSrc points to the input buffer - * @param[in] blockSize length of the input vector - * @param[out] pResult maximum value returned here - * @param[out] pIndex index of maximum value returned here - */ - void arm_max_q15( - q15_t * pSrc, - uint32_t blockSize, - q15_t * pResult, - uint32_t * pIndex); - - -/** - * @brief Maximum value of a Q31 vector. - * @param[in] pSrc points to the input buffer - * @param[in] blockSize length of the input vector - * @param[out] pResult maximum value returned here - * @param[out] pIndex index of maximum value returned here - */ - void arm_max_q31( - q31_t * pSrc, - uint32_t blockSize, - q31_t * pResult, - uint32_t * pIndex); - - -/** - * @brief Maximum value of a floating-point vector. - * @param[in] pSrc points to the input buffer - * @param[in] blockSize length of the input vector - * @param[out] pResult maximum value returned here - * @param[out] pIndex index of maximum value returned here - */ - void arm_max_f32( - float32_t * pSrc, - uint32_t blockSize, - float32_t * pResult, - uint32_t * pIndex); - - - /** - * @brief Q15 complex-by-complex multiplication - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[out] pDst points to the output vector - * @param[in] numSamples number of complex samples in each vector - */ - void arm_cmplx_mult_cmplx_q15( - q15_t * pSrcA, - q15_t * pSrcB, - q15_t * pDst, - uint32_t numSamples); - - - /** - * @brief Q31 complex-by-complex multiplication - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[out] pDst points to the output vector - * @param[in] numSamples number of complex samples in each vector - */ - void arm_cmplx_mult_cmplx_q31( - q31_t * pSrcA, - q31_t * pSrcB, - q31_t * pDst, - uint32_t numSamples); - - - /** - * @brief Floating-point complex-by-complex multiplication - * @param[in] pSrcA points to the first input vector - * @param[in] pSrcB points to the second input vector - * @param[out] pDst points to the output vector - * @param[in] numSamples number of complex samples in each vector - */ - void arm_cmplx_mult_cmplx_f32( - float32_t * pSrcA, - float32_t * pSrcB, - float32_t * pDst, - uint32_t numSamples); - - - /** - * @brief Converts the elements of the floating-point vector to Q31 vector. - * @param[in] pSrc points to the floating-point input vector - * @param[out] pDst points to the Q31 output vector - * @param[in] blockSize length of the input vector - */ - void arm_float_to_q31( - float32_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Converts the elements of the floating-point vector to Q15 vector. - * @param[in] pSrc points to the floating-point input vector - * @param[out] pDst points to the Q15 output vector - * @param[in] blockSize length of the input vector - */ - void arm_float_to_q15( - float32_t * pSrc, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Converts the elements of the floating-point vector to Q7 vector. - * @param[in] pSrc points to the floating-point input vector - * @param[out] pDst points to the Q7 output vector - * @param[in] blockSize length of the input vector - */ - void arm_float_to_q7( - float32_t * pSrc, - q7_t * pDst, - uint32_t blockSize); - - - /** - * @brief Converts the elements of the Q31 vector to Q15 vector. - * @param[in] pSrc is input pointer - * @param[out] pDst is output pointer - * @param[in] blockSize is the number of samples to process - */ - void arm_q31_to_q15( - q31_t * pSrc, - q15_t * pDst, - uint32_t blockSize); - - - /** - * @brief Converts the elements of the Q31 vector to Q7 vector. - * @param[in] pSrc is input pointer - * @param[out] pDst is output pointer - * @param[in] blockSize is the number of samples to process - */ - void arm_q31_to_q7( - q31_t * pSrc, - q7_t * pDst, - uint32_t blockSize); - - - /** - * @brief Converts the elements of the Q15 vector to floating-point vector. - * @param[in] pSrc is input pointer - * @param[out] pDst is output pointer - * @param[in] blockSize is the number of samples to process - */ - void arm_q15_to_float( - q15_t * pSrc, - float32_t * pDst, - uint32_t blockSize); - - - /** - * @brief Converts the elements of the Q15 vector to Q31 vector. - * @param[in] pSrc is input pointer - * @param[out] pDst is output pointer - * @param[in] blockSize is the number of samples to process - */ - void arm_q15_to_q31( - q15_t * pSrc, - q31_t * pDst, - uint32_t blockSize); - - - /** - * @brief Converts the elements of the Q15 vector to Q7 vector. - * @param[in] pSrc is input pointer - * @param[out] pDst is output pointer - * @param[in] blockSize is the number of samples to process - */ - void arm_q15_to_q7( - q15_t * pSrc, - q7_t * pDst, - uint32_t blockSize); - - - /** - * @ingroup groupInterpolation - */ - - /** - * @defgroup BilinearInterpolate Bilinear Interpolation - * - * Bilinear interpolation is an extension of linear interpolation applied to a two dimensional grid. - * The underlying function <code>f(x, y)</code> is sampled on a regular grid and the interpolation process - * determines values between the grid points. - * Bilinear interpolation is equivalent to two step linear interpolation, first in the x-dimension and then in the y-dimension. - * Bilinear interpolation is often used in image processing to rescale images. - * The CMSIS DSP library provides bilinear interpolation functions for Q7, Q15, Q31, and floating-point data types. - * - * <b>Algorithm</b> - * \par - * The instance structure used by the bilinear interpolation functions describes a two dimensional data table. - * For floating-point, the instance structure is defined as: - * <pre> - * typedef struct - * { - * uint16_t numRows; - * uint16_t numCols; - * float32_t *pData; - * } arm_bilinear_interp_instance_f32; - * </pre> - * - * \par - * where <code>numRows</code> specifies the number of rows in the table; - * <code>numCols</code> specifies the number of columns in the table; - * and <code>pData</code> points to an array of size <code>numRows*numCols</code> values. - * The data table <code>pTable</code> is organized in row order and the supplied data values fall on integer indexes. - * That is, table element (x,y) is located at <code>pTable[x + y*numCols]</code> where x and y are integers. - * - * \par - * Let <code>(x, y)</code> specify the desired interpolation point. Then define: - * <pre> - * XF = floor(x) - * YF = floor(y) - * </pre> - * \par - * The interpolated output point is computed as: - * <pre> - * f(x, y) = f(XF, YF) * (1-(x-XF)) * (1-(y-YF)) - * + f(XF+1, YF) * (x-XF)*(1-(y-YF)) - * + f(XF, YF+1) * (1-(x-XF))*(y-YF) - * + f(XF+1, YF+1) * (x-XF)*(y-YF) - * </pre> - * Note that the coordinates (x, y) contain integer and fractional components. - * The integer components specify which portion of the table to use while the - * fractional components control the interpolation processor. - * - * \par - * if (x,y) are outside of the table boundary, Bilinear interpolation returns zero output. - */ - - /** - * @addtogroup BilinearInterpolate - * @{ - */ - - - /** - * - * @brief Floating-point bilinear interpolation. - * @param[in,out] S points to an instance of the interpolation structure. - * @param[in] X interpolation coordinate. - * @param[in] Y interpolation coordinate. - * @return out interpolated value. - */ - static __INLINE float32_t arm_bilinear_interp_f32( - const arm_bilinear_interp_instance_f32 * S, - float32_t X, - float32_t Y) - { - float32_t out; - float32_t f00, f01, f10, f11; - float32_t *pData = S->pData; - int32_t xIndex, yIndex, index; - float32_t xdiff, ydiff; - float32_t b1, b2, b3, b4; - - xIndex = (int32_t) X; - yIndex = (int32_t) Y; - - /* Care taken for table outside boundary */ - /* Returns zero output when values are outside table boundary */ - if(xIndex < 0 || xIndex > (S->numRows - 1) || yIndex < 0 || yIndex > (S->numCols - 1)) - { - return (0); - } - - /* Calculation of index for two nearest points in X-direction */ - index = (xIndex - 1) + (yIndex - 1) * S->numCols; - - - /* Read two nearest points in X-direction */ - f00 = pData[index]; - f01 = pData[index + 1]; - - /* Calculation of index for two nearest points in Y-direction */ - index = (xIndex - 1) + (yIndex) * S->numCols; - - - /* Read two nearest points in Y-direction */ - f10 = pData[index]; - f11 = pData[index + 1]; - - /* Calculation of intermediate values */ - b1 = f00; - b2 = f01 - f00; - b3 = f10 - f00; - b4 = f00 - f01 - f10 + f11; - - /* Calculation of fractional part in X */ - xdiff = X - xIndex; - - /* Calculation of fractional part in Y */ - ydiff = Y - yIndex; - - /* Calculation of bi-linear interpolated output */ - out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff; - - /* return to application */ - return (out); - } - - - /** - * - * @brief Q31 bilinear interpolation. - * @param[in,out] S points to an instance of the interpolation structure. - * @param[in] X interpolation coordinate in 12.20 format. - * @param[in] Y interpolation coordinate in 12.20 format. - * @return out interpolated value. - */ - static __INLINE q31_t arm_bilinear_interp_q31( - arm_bilinear_interp_instance_q31 * S, - q31_t X, - q31_t Y) - { - q31_t out; /* Temporary output */ - q31_t acc = 0; /* output */ - q31_t xfract, yfract; /* X, Y fractional parts */ - q31_t x1, x2, y1, y2; /* Nearest output values */ - int32_t rI, cI; /* Row and column indices */ - q31_t *pYData = S->pData; /* pointer to output table values */ - uint32_t nCols = S->numCols; /* num of rows */ - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - rI = ((X & (q31_t)0xFFF00000) >> 20); - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - cI = ((Y & (q31_t)0xFFF00000) >> 20); - - /* Care taken for table outside boundary */ - /* Returns zero output when values are outside table boundary */ - if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1)) - { - return (0); - } - - /* 20 bits for the fractional part */ - /* shift left xfract by 11 to keep 1.31 format */ - xfract = (X & 0x000FFFFF) << 11u; - - /* Read two nearest output values from the index */ - x1 = pYData[(rI) + (int32_t)nCols * (cI) ]; - x2 = pYData[(rI) + (int32_t)nCols * (cI) + 1]; - - /* 20 bits for the fractional part */ - /* shift left yfract by 11 to keep 1.31 format */ - yfract = (Y & 0x000FFFFF) << 11u; - - /* Read two nearest output values from the index */ - y1 = pYData[(rI) + (int32_t)nCols * (cI + 1) ]; - y2 = pYData[(rI) + (int32_t)nCols * (cI + 1) + 1]; - - /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */ - out = ((q31_t) (((q63_t) x1 * (0x7FFFFFFF - xfract)) >> 32)); - acc = ((q31_t) (((q63_t) out * (0x7FFFFFFF - yfract)) >> 32)); - - /* x2 * (xfract) * (1-yfract) in 3.29(q29) and adding to acc */ - out = ((q31_t) ((q63_t) x2 * (0x7FFFFFFF - yfract) >> 32)); - acc += ((q31_t) ((q63_t) out * (xfract) >> 32)); - - /* y1 * (1 - xfract) * (yfract) in 3.29(q29) and adding to acc */ - out = ((q31_t) ((q63_t) y1 * (0x7FFFFFFF - xfract) >> 32)); - acc += ((q31_t) ((q63_t) out * (yfract) >> 32)); - - /* y2 * (xfract) * (yfract) in 3.29(q29) and adding to acc */ - out = ((q31_t) ((q63_t) y2 * (xfract) >> 32)); - acc += ((q31_t) ((q63_t) out * (yfract) >> 32)); - - /* Convert acc to 1.31(q31) format */ - return ((q31_t)(acc << 2)); - } - - - /** - * @brief Q15 bilinear interpolation. - * @param[in,out] S points to an instance of the interpolation structure. - * @param[in] X interpolation coordinate in 12.20 format. - * @param[in] Y interpolation coordinate in 12.20 format. - * @return out interpolated value. - */ - static __INLINE q15_t arm_bilinear_interp_q15( - arm_bilinear_interp_instance_q15 * S, - q31_t X, - q31_t Y) - { - q63_t acc = 0; /* output */ - q31_t out; /* Temporary output */ - q15_t x1, x2, y1, y2; /* Nearest output values */ - q31_t xfract, yfract; /* X, Y fractional parts */ - int32_t rI, cI; /* Row and column indices */ - q15_t *pYData = S->pData; /* pointer to output table values */ - uint32_t nCols = S->numCols; /* num of rows */ - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - rI = ((X & (q31_t)0xFFF00000) >> 20); - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - cI = ((Y & (q31_t)0xFFF00000) >> 20); - - /* Care taken for table outside boundary */ - /* Returns zero output when values are outside table boundary */ - if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1)) - { - return (0); - } - - /* 20 bits for the fractional part */ - /* xfract should be in 12.20 format */ - xfract = (X & 0x000FFFFF); - - /* Read two nearest output values from the index */ - x1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) ]; - x2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) + 1]; - - /* 20 bits for the fractional part */ - /* yfract should be in 12.20 format */ - yfract = (Y & 0x000FFFFF); - - /* Read two nearest output values from the index */ - y1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) ]; - y2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) + 1]; - - /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */ - - /* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */ - /* convert 13.35 to 13.31 by right shifting and out is in 1.31 */ - out = (q31_t) (((q63_t) x1 * (0xFFFFF - xfract)) >> 4u); - acc = ((q63_t) out * (0xFFFFF - yfract)); - - /* x2 * (xfract) * (1-yfract) in 1.51 and adding to acc */ - out = (q31_t) (((q63_t) x2 * (0xFFFFF - yfract)) >> 4u); - acc += ((q63_t) out * (xfract)); - - /* y1 * (1 - xfract) * (yfract) in 1.51 and adding to acc */ - out = (q31_t) (((q63_t) y1 * (0xFFFFF - xfract)) >> 4u); - acc += ((q63_t) out * (yfract)); - - /* y2 * (xfract) * (yfract) in 1.51 and adding to acc */ - out = (q31_t) (((q63_t) y2 * (xfract)) >> 4u); - acc += ((q63_t) out * (yfract)); - - /* acc is in 13.51 format and down shift acc by 36 times */ - /* Convert out to 1.15 format */ - return ((q15_t)(acc >> 36)); - } - - - /** - * @brief Q7 bilinear interpolation. - * @param[in,out] S points to an instance of the interpolation structure. - * @param[in] X interpolation coordinate in 12.20 format. - * @param[in] Y interpolation coordinate in 12.20 format. - * @return out interpolated value. - */ - static __INLINE q7_t arm_bilinear_interp_q7( - arm_bilinear_interp_instance_q7 * S, - q31_t X, - q31_t Y) - { - q63_t acc = 0; /* output */ - q31_t out; /* Temporary output */ - q31_t xfract, yfract; /* X, Y fractional parts */ - q7_t x1, x2, y1, y2; /* Nearest output values */ - int32_t rI, cI; /* Row and column indices */ - q7_t *pYData = S->pData; /* pointer to output table values */ - uint32_t nCols = S->numCols; /* num of rows */ - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - rI = ((X & (q31_t)0xFFF00000) >> 20); - - /* Input is in 12.20 format */ - /* 12 bits for the table index */ - /* Index value calculation */ - cI = ((Y & (q31_t)0xFFF00000) >> 20); - - /* Care taken for table outside boundary */ - /* Returns zero output when values are outside table boundary */ - if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1)) - { - return (0); - } - - /* 20 bits for the fractional part */ - /* xfract should be in 12.20 format */ - xfract = (X & (q31_t)0x000FFFFF); - - /* Read two nearest output values from the index */ - x1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) ]; - x2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI) + 1]; - - /* 20 bits for the fractional part */ - /* yfract should be in 12.20 format */ - yfract = (Y & (q31_t)0x000FFFFF); - - /* Read two nearest output values from the index */ - y1 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) ]; - y2 = pYData[((uint32_t)rI) + nCols * ((uint32_t)cI + 1) + 1]; - - /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */ - out = ((x1 * (0xFFFFF - xfract))); - acc = (((q63_t) out * (0xFFFFF - yfract))); - - /* x2 * (xfract) * (1-yfract) in 2.22 and adding to acc */ - out = ((x2 * (0xFFFFF - yfract))); - acc += (((q63_t) out * (xfract))); - - /* y1 * (1 - xfract) * (yfract) in 2.22 and adding to acc */ - out = ((y1 * (0xFFFFF - xfract))); - acc += (((q63_t) out * (yfract))); - - /* y2 * (xfract) * (yfract) in 2.22 and adding to acc */ - out = ((y2 * (yfract))); - acc += (((q63_t) out * (xfract))); - - /* acc in 16.47 format and down shift by 40 to convert to 1.7 format */ - return ((q7_t)(acc >> 40)); - } - - /** - * @} end of BilinearInterpolate group - */ - - -/* SMMLAR */ -#define multAcc_32x32_keep32_R(a, x, y) \ - a = (q31_t) (((((q63_t) a) << 32) + ((q63_t) x * y) + 0x80000000LL ) >> 32) - -/* SMMLSR */ -#define multSub_32x32_keep32_R(a, x, y) \ - a = (q31_t) (((((q63_t) a) << 32) - ((q63_t) x * y) + 0x80000000LL ) >> 32) - -/* SMMULR */ -#define mult_32x32_keep32_R(a, x, y) \ - a = (q31_t) (((q63_t) x * y + 0x80000000LL ) >> 32) - -/* SMMLA */ -#define multAcc_32x32_keep32(a, x, y) \ - a += (q31_t) (((q63_t) x * y) >> 32) - -/* SMMLS */ -#define multSub_32x32_keep32(a, x, y) \ - a -= (q31_t) (((q63_t) x * y) >> 32) - -/* SMMUL */ -#define mult_32x32_keep32(a, x, y) \ - a = (q31_t) (((q63_t) x * y ) >> 32) - - -#if defined ( __CC_ARM ) - /* Enter low optimization region - place directly above function definition */ - #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7) - #define LOW_OPTIMIZATION_ENTER \ - _Pragma ("push") \ - _Pragma ("O1") - #else - #define LOW_OPTIMIZATION_ENTER - #endif - - /* Exit low optimization region - place directly after end of function definition */ - #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7) - #define LOW_OPTIMIZATION_EXIT \ - _Pragma ("pop") - #else - #define LOW_OPTIMIZATION_EXIT - #endif - - /* Enter low optimization region - place directly above function definition */ - #define IAR_ONLY_LOW_OPTIMIZATION_ENTER - - /* Exit low optimization region - place directly after end of function definition */ - #define IAR_ONLY_LOW_OPTIMIZATION_EXIT - -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #define LOW_OPTIMIZATION_ENTER - #define LOW_OPTIMIZATION_EXIT - #define IAR_ONLY_LOW_OPTIMIZATION_ENTER - #define IAR_ONLY_LOW_OPTIMIZATION_EXIT - -#elif defined(__GNUC__) - #define LOW_OPTIMIZATION_ENTER __attribute__(( optimize("-O1") )) - #define LOW_OPTIMIZATION_EXIT - #define IAR_ONLY_LOW_OPTIMIZATION_ENTER - #define IAR_ONLY_LOW_OPTIMIZATION_EXIT - -#elif defined(__ICCARM__) - /* Enter low optimization region - place directly above function definition */ - #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7) - #define LOW_OPTIMIZATION_ENTER \ - _Pragma ("optimize=low") - #else - #define LOW_OPTIMIZATION_ENTER - #endif - - /* Exit low optimization region - place directly after end of function definition */ - #define LOW_OPTIMIZATION_EXIT - - /* Enter low optimization region - place directly above function definition */ - #if defined( ARM_MATH_CM4 ) || defined( ARM_MATH_CM7) - #define IAR_ONLY_LOW_OPTIMIZATION_ENTER \ - _Pragma ("optimize=low") - #else - #define IAR_ONLY_LOW_OPTIMIZATION_ENTER - #endif - - /* Exit low optimization region - place directly after end of function definition */ - #define IAR_ONLY_LOW_OPTIMIZATION_EXIT - -#elif defined(__CSMC__) - #define LOW_OPTIMIZATION_ENTER - #define LOW_OPTIMIZATION_EXIT - #define IAR_ONLY_LOW_OPTIMIZATION_ENTER - #define IAR_ONLY_LOW_OPTIMIZATION_EXIT - -#elif defined(__TASKING__) - #define LOW_OPTIMIZATION_ENTER - #define LOW_OPTIMIZATION_EXIT - #define IAR_ONLY_LOW_OPTIMIZATION_ENTER - #define IAR_ONLY_LOW_OPTIMIZATION_EXIT - -#endif - - -#ifdef __cplusplus -} -#endif - - -#if defined ( __GNUC__ ) -#pragma GCC diagnostic pop -#endif - -#endif /* _ARM_MATH_H */ - -/** - * - * End of file. - */ diff --git a/stm32cubemx/Drivers/CMSIS/Include/cmsis_armcc.h b/stm32cubemx/Drivers/CMSIS/Include/cmsis_armcc.h deleted file mode 100644 index 74c49c6..0000000 --- a/stm32cubemx/Drivers/CMSIS/Include/cmsis_armcc.h +++ /dev/null @@ -1,734 +0,0 @@ -/**************************************************************************//** - * @file cmsis_armcc.h - * @brief CMSIS Cortex-M Core Function/Instruction Header File - * @version V4.30 - * @date 20. October 2015 - ******************************************************************************/ -/* Copyright (c) 2009 - 2015 ARM LIMITED - - All rights reserved. - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - Neither the name of ARM nor the names of its contributors may be used - to endorse or promote products derived from this software without - specific prior written permission. - * - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - ---------------------------------------------------------------------------*/ - - -#ifndef __CMSIS_ARMCC_H -#define __CMSIS_ARMCC_H - - -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677) - #error "Please use ARM Compiler Toolchain V4.0.677 or later!" -#endif - -/* ########################### Core Function Access ########################### */ -/** \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions - @{ - */ - -/* intrinsic void __enable_irq(); */ -/* intrinsic void __disable_irq(); */ - -/** - \brief Get Control Register - \details Returns the content of the Control Register. - \return Control Register value - */ -__STATIC_INLINE uint32_t __get_CONTROL(void) -{ - register uint32_t __regControl __ASM("control"); - return(__regControl); -} - - -/** - \brief Set Control Register - \details Writes the given value to the Control Register. - \param [in] control Control Register value to set - */ -__STATIC_INLINE void __set_CONTROL(uint32_t control) -{ - register uint32_t __regControl __ASM("control"); - __regControl = control; -} - - -/** - \brief Get IPSR Register - \details Returns the content of the IPSR Register. - \return IPSR Register value - */ -__STATIC_INLINE uint32_t __get_IPSR(void) -{ - register uint32_t __regIPSR __ASM("ipsr"); - return(__regIPSR); -} - - -/** - \brief Get APSR Register - \details Returns the content of the APSR Register. - \return APSR Register value - */ -__STATIC_INLINE uint32_t __get_APSR(void) -{ - register uint32_t __regAPSR __ASM("apsr"); - return(__regAPSR); -} - - -/** - \brief Get xPSR Register - \details Returns the content of the xPSR Register. - \return xPSR Register value - */ -__STATIC_INLINE uint32_t __get_xPSR(void) -{ - register uint32_t __regXPSR __ASM("xpsr"); - return(__regXPSR); -} - - -/** - \brief Get Process Stack Pointer - \details Returns the current value of the Process Stack Pointer (PSP). - \return PSP Register value - */ -__STATIC_INLINE uint32_t __get_PSP(void) -{ - register uint32_t __regProcessStackPointer __ASM("psp"); - return(__regProcessStackPointer); -} - - -/** - \brief Set Process Stack Pointer - \details Assigns the given value to the Process Stack Pointer (PSP). - \param [in] topOfProcStack Process Stack Pointer value to set - */ -__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) -{ - register uint32_t __regProcessStackPointer __ASM("psp"); - __regProcessStackPointer = topOfProcStack; -} - - -/** - \brief Get Main Stack Pointer - \details Returns the current value of the Main Stack Pointer (MSP). - \return MSP Register value - */ -__STATIC_INLINE uint32_t __get_MSP(void) -{ - register uint32_t __regMainStackPointer __ASM("msp"); - return(__regMainStackPointer); -} - - -/** - \brief Set Main Stack Pointer - \details Assigns the given value to the Main Stack Pointer (MSP). - \param [in] topOfMainStack Main Stack Pointer value to set - */ -__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) -{ - register uint32_t __regMainStackPointer __ASM("msp"); - __regMainStackPointer = topOfMainStack; -} - - -/** - \brief Get Priority Mask - \details Returns the current state of the priority mask bit from the Priority Mask Register. - \return Priority Mask value - */ -__STATIC_INLINE uint32_t __get_PRIMASK(void) -{ - register uint32_t __regPriMask __ASM("primask"); - return(__regPriMask); -} - - -/** - \brief Set Priority Mask - \details Assigns the given value to the Priority Mask Register. - \param [in] priMask Priority Mask - */ -__STATIC_INLINE void __set_PRIMASK(uint32_t priMask) -{ - register uint32_t __regPriMask __ASM("primask"); - __regPriMask = (priMask); -} - - -#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) - -/** - \brief Enable FIQ - \details Enables FIQ interrupts by clearing the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -#define __enable_fault_irq __enable_fiq - - -/** - \brief Disable FIQ - \details Disables FIQ interrupts by setting the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -#define __disable_fault_irq __disable_fiq - - -/** - \brief Get Base Priority - \details Returns the current value of the Base Priority register. - \return Base Priority register value - */ -__STATIC_INLINE uint32_t __get_BASEPRI(void) -{ - register uint32_t __regBasePri __ASM("basepri"); - return(__regBasePri); -} - - -/** - \brief Set Base Priority - \details Assigns the given value to the Base Priority register. - \param [in] basePri Base Priority value to set - */ -__STATIC_INLINE void __set_BASEPRI(uint32_t basePri) -{ - register uint32_t __regBasePri __ASM("basepri"); - __regBasePri = (basePri & 0xFFU); -} - - -/** - \brief Set Base Priority with condition - \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, - or the new value increases the BASEPRI priority level. - \param [in] basePri Base Priority value to set - */ -__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri) -{ - register uint32_t __regBasePriMax __ASM("basepri_max"); - __regBasePriMax = (basePri & 0xFFU); -} - - -/** - \brief Get Fault Mask - \details Returns the current value of the Fault Mask register. - \return Fault Mask register value - */ -__STATIC_INLINE uint32_t __get_FAULTMASK(void) -{ - register uint32_t __regFaultMask __ASM("faultmask"); - return(__regFaultMask); -} - - -/** - \brief Set Fault Mask - \details Assigns the given value to the Fault Mask register. - \param [in] faultMask Fault Mask value to set - */ -__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) -{ - register uint32_t __regFaultMask __ASM("faultmask"); - __regFaultMask = (faultMask & (uint32_t)1); -} - -#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */ - - -#if (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) - -/** - \brief Get FPSCR - \details Returns the current value of the Floating Point Status/Control register. - \return Floating Point Status/Control register value - */ -__STATIC_INLINE uint32_t __get_FPSCR(void) -{ -#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) - register uint32_t __regfpscr __ASM("fpscr"); - return(__regfpscr); -#else - return(0U); -#endif -} - - -/** - \brief Set FPSCR - \details Assigns the given value to the Floating Point Status/Control register. - \param [in] fpscr Floating Point Status/Control value to set - */ -__STATIC_INLINE void __set_FPSCR(uint32_t fpscr) -{ -#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) - register uint32_t __regfpscr __ASM("fpscr"); - __regfpscr = (fpscr); -#endif -} - -#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */ - - - -/*@} end of CMSIS_Core_RegAccFunctions */ - - -/* ########################## Core Instruction Access ######################### */ -/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface - Access to dedicated instructions - @{ -*/ - -/** - \brief No Operation - \details No Operation does nothing. This instruction can be used for code alignment purposes. - */ -#define __NOP __nop - - -/** - \brief Wait For Interrupt - \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. - */ -#define __WFI __wfi - - -/** - \brief Wait For Event - \details Wait For Event is a hint instruction that permits the processor to enter - a low-power state until one of a number of events occurs. - */ -#define __WFE __wfe - - -/** - \brief Send Event - \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. - */ -#define __SEV __sev - - -/** - \brief Instruction Synchronization Barrier - \details Instruction Synchronization Barrier flushes the pipeline in the processor, - so that all instructions following the ISB are fetched from cache or memory, - after the instruction has been completed. - */ -#define __ISB() do {\ - __schedule_barrier();\ - __isb(0xF);\ - __schedule_barrier();\ - } while (0U) - -/** - \brief Data Synchronization Barrier - \details Acts as a special kind of Data Memory Barrier. - It completes when all explicit memory accesses before this instruction complete. - */ -#define __DSB() do {\ - __schedule_barrier();\ - __dsb(0xF);\ - __schedule_barrier();\ - } while (0U) - -/** - \brief Data Memory Barrier - \details Ensures the apparent order of the explicit memory operations before - and after the instruction, without ensuring their completion. - */ -#define __DMB() do {\ - __schedule_barrier();\ - __dmb(0xF);\ - __schedule_barrier();\ - } while (0U) - -/** - \brief Reverse byte order (32 bit) - \details Reverses the byte order in integer value. - \param [in] value Value to reverse - \return Reversed value - */ -#define __REV __rev - - -/** - \brief Reverse byte order (16 bit) - \details Reverses the byte order in two unsigned short values. - \param [in] value Value to reverse - \return Reversed value - */ -#ifndef __NO_EMBEDDED_ASM -__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value) -{ - rev16 r0, r0 - bx lr -} -#endif - -/** - \brief Reverse byte order in signed short value - \details Reverses the byte order in a signed short value with sign extension to integer. - \param [in] value Value to reverse - \return Reversed value - */ -#ifndef __NO_EMBEDDED_ASM -__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value) -{ - revsh r0, r0 - bx lr -} -#endif - - -/** - \brief Rotate Right in unsigned value (32 bit) - \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. - \param [in] value Value to rotate - \param [in] value Number of Bits to rotate - \return Rotated value - */ -#define __ROR __ror - - -/** - \brief Breakpoint - \details Causes the processor to enter Debug state. - Debug tools can use this to investigate system state when the instruction at a particular address is reached. - \param [in] value is ignored by the processor. - If required, a debugger can use it to store additional information about the breakpoint. - */ -#define __BKPT(value) __breakpoint(value) - - -/** - \brief Reverse bit order of value - \details Reverses the bit order of the given value. - \param [in] value Value to reverse - \return Reversed value - */ -#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) - #define __RBIT __rbit -#else -__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) -{ - uint32_t result; - int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */ - - result = value; /* r will be reversed bits of v; first get LSB of v */ - for (value >>= 1U; value; value >>= 1U) - { - result <<= 1U; - result |= value & 1U; - s--; - } - result <<= s; /* shift when v's highest bits are zero */ - return(result); -} -#endif - - -/** - \brief Count leading zeros - \details Counts the number of leading zeros of a data value. - \param [in] value Value to count the leading zeros - \return number of leading zeros in value - */ -#define __CLZ __clz - - -#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) - -/** - \brief LDR Exclusive (8 bit) - \details Executes a exclusive LDR instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr)) -#else - #define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop") -#endif - - -/** - \brief LDR Exclusive (16 bit) - \details Executes a exclusive LDR instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __LDREXH(ptr) ((uint16_t) __ldrex(ptr)) -#else - #define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop") -#endif - - -/** - \brief LDR Exclusive (32 bit) - \details Executes a exclusive LDR instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr)) -#else - #define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop") -#endif - - -/** - \brief STR Exclusive (8 bit) - \details Executes a exclusive STR instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __STREXB(value, ptr) __strex(value, ptr) -#else - #define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") -#endif - - -/** - \brief STR Exclusive (16 bit) - \details Executes a exclusive STR instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __STREXH(value, ptr) __strex(value, ptr) -#else - #define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") -#endif - - -/** - \brief STR Exclusive (32 bit) - \details Executes a exclusive STR instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020) - #define __STREXW(value, ptr) __strex(value, ptr) -#else - #define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop") -#endif - - -/** - \brief Remove the exclusive lock - \details Removes the exclusive lock which is created by LDREX. - */ -#define __CLREX __clrex - - -/** - \brief Signed Saturate - \details Saturates a signed value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (1..32) - \return Saturated value - */ -#define __SSAT __ssat - - -/** - \brief Unsigned Saturate - \details Saturates an unsigned value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (0..31) - \return Saturated value - */ -#define __USAT __usat - - -/** - \brief Rotate Right with Extend (32 bit) - \details Moves each bit of a bitstring right by one bit. - The carry input is shifted in at the left end of the bitstring. - \param [in] value Value to rotate - \return Rotated value - */ -#ifndef __NO_EMBEDDED_ASM -__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value) -{ - rrx r0, r0 - bx lr -} -#endif - - -/** - \brief LDRT Unprivileged (8 bit) - \details Executes a Unprivileged LDRT instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr)) - - -/** - \brief LDRT Unprivileged (16 bit) - \details Executes a Unprivileged LDRT instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr)) - - -/** - \brief LDRT Unprivileged (32 bit) - \details Executes a Unprivileged LDRT instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr)) - - -/** - \brief STRT Unprivileged (8 bit) - \details Executes a Unprivileged STRT instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -#define __STRBT(value, ptr) __strt(value, ptr) - - -/** - \brief STRT Unprivileged (16 bit) - \details Executes a Unprivileged STRT instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -#define __STRHT(value, ptr) __strt(value, ptr) - - -/** - \brief STRT Unprivileged (32 bit) - \details Executes a Unprivileged STRT instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -#define __STRT(value, ptr) __strt(value, ptr) - -#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */ - -/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ - - -/* ################### Compiler specific Intrinsics ########################### */ -/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics - Access to dedicated SIMD instructions - @{ -*/ - -#if (__CORTEX_M >= 0x04U) /* only for Cortex-M4 and above */ - -#define __SADD8 __sadd8 -#define __QADD8 __qadd8 -#define __SHADD8 __shadd8 -#define __UADD8 __uadd8 -#define __UQADD8 __uqadd8 -#define __UHADD8 __uhadd8 -#define __SSUB8 __ssub8 -#define __QSUB8 __qsub8 -#define __SHSUB8 __shsub8 -#define __USUB8 __usub8 -#define __UQSUB8 __uqsub8 -#define __UHSUB8 __uhsub8 -#define __SADD16 __sadd16 -#define __QADD16 __qadd16 -#define __SHADD16 __shadd16 -#define __UADD16 __uadd16 -#define __UQADD16 __uqadd16 -#define __UHADD16 __uhadd16 -#define __SSUB16 __ssub16 -#define __QSUB16 __qsub16 -#define __SHSUB16 __shsub16 -#define __USUB16 __usub16 -#define __UQSUB16 __uqsub16 -#define __UHSUB16 __uhsub16 -#define __SASX __sasx -#define __QASX __qasx -#define __SHASX __shasx -#define __UASX __uasx -#define __UQASX __uqasx -#define __UHASX __uhasx -#define __SSAX __ssax -#define __QSAX __qsax -#define __SHSAX __shsax -#define __USAX __usax -#define __UQSAX __uqsax -#define __UHSAX __uhsax -#define __USAD8 __usad8 -#define __USADA8 __usada8 -#define __SSAT16 __ssat16 -#define __USAT16 __usat16 -#define __UXTB16 __uxtb16 -#define __UXTAB16 __uxtab16 -#define __SXTB16 __sxtb16 -#define __SXTAB16 __sxtab16 -#define __SMUAD __smuad -#define __SMUADX __smuadx -#define __SMLAD __smlad -#define __SMLADX __smladx -#define __SMLALD __smlald -#define __SMLALDX __smlaldx -#define __SMUSD __smusd -#define __SMUSDX __smusdx -#define __SMLSD __smlsd -#define __SMLSDX __smlsdx -#define __SMLSLD __smlsld -#define __SMLSLDX __smlsldx -#define __SEL __sel -#define __QADD __qadd -#define __QSUB __qsub - -#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \ - ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) ) - -#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \ - ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) ) - -#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \ - ((int64_t)(ARG3) << 32U) ) >> 32U)) - -#endif /* (__CORTEX_M >= 0x04) */ -/*@} end of group CMSIS_SIMD_intrinsics */ - - -#endif /* __CMSIS_ARMCC_H */ diff --git a/stm32cubemx/Drivers/CMSIS/Include/cmsis_armcc_V6.h b/stm32cubemx/Drivers/CMSIS/Include/cmsis_armcc_V6.h deleted file mode 100644 index cd13240..0000000 --- a/stm32cubemx/Drivers/CMSIS/Include/cmsis_armcc_V6.h +++ /dev/null @@ -1,1800 +0,0 @@ -/**************************************************************************//** - * @file cmsis_armcc_V6.h - * @brief CMSIS Cortex-M Core Function/Instruction Header File - * @version V4.30 - * @date 20. October 2015 - ******************************************************************************/ -/* Copyright (c) 2009 - 2015 ARM LIMITED - - All rights reserved. - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - Neither the name of ARM nor the names of its contributors may be used - to endorse or promote products derived from this software without - specific prior written permission. - * - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - ---------------------------------------------------------------------------*/ - - -#ifndef __CMSIS_ARMCC_V6_H -#define __CMSIS_ARMCC_V6_H - - -/* ########################### Core Function Access ########################### */ -/** \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions - @{ - */ - -/** - \brief Enable IRQ Interrupts - \details Enables IRQ interrupts by clearing the I-bit in the CPSR. - Can only be executed in Privileged modes. - */ -__attribute__((always_inline)) __STATIC_INLINE void __enable_irq(void) -{ - __ASM volatile ("cpsie i" : : : "memory"); -} - - -/** - \brief Disable IRQ Interrupts - \details Disables IRQ interrupts by setting the I-bit in the CPSR. - Can only be executed in Privileged modes. - */ -__attribute__((always_inline)) __STATIC_INLINE void __disable_irq(void) -{ - __ASM volatile ("cpsid i" : : : "memory"); -} - - -/** - \brief Get Control Register - \details Returns the content of the Control Register. - \return Control Register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_CONTROL(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, control" : "=r" (result) ); - return(result); -} - - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get Control Register (non-secure) - \details Returns the content of the non-secure Control Register when in secure mode. - \return non-secure Control Register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_CONTROL_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, control_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Control Register - \details Writes the given value to the Control Register. - \param [in] control Control Register value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __set_CONTROL(uint32_t control) -{ - __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); -} - - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Set Control Register (non-secure) - \details Writes the given value to the non-secure Control Register when in secure state. - \param [in] control Control Register value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_CONTROL_NS(uint32_t control) -{ - __ASM volatile ("MSR control_ns, %0" : : "r" (control) : "memory"); -} -#endif - - -/** - \brief Get IPSR Register - \details Returns the content of the IPSR Register. - \return IPSR Register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_IPSR(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); - return(result); -} - - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get IPSR Register (non-secure) - \details Returns the content of the non-secure IPSR Register when in secure state. - \return IPSR Register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_IPSR_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, ipsr_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Get APSR Register - \details Returns the content of the APSR Register. - \return APSR Register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_APSR(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, apsr" : "=r" (result) ); - return(result); -} - - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get APSR Register (non-secure) - \details Returns the content of the non-secure APSR Register when in secure state. - \return APSR Register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_APSR_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, apsr_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Get xPSR Register - \details Returns the content of the xPSR Register. - \return xPSR Register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_xPSR(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); - return(result); -} - - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get xPSR Register (non-secure) - \details Returns the content of the non-secure xPSR Register when in secure state. - \return xPSR Register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_xPSR_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, xpsr_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Get Process Stack Pointer - \details Returns the current value of the Process Stack Pointer (PSP). - \return PSP Register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSP(void) -{ - register uint32_t result; - - __ASM volatile ("MRS %0, psp" : "=r" (result) ); - return(result); -} - - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get Process Stack Pointer (non-secure) - \details Returns the current value of the non-secure Process Stack Pointer (PSP) when in secure state. - \return PSP Register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSP_NS(void) -{ - register uint32_t result; - - __ASM volatile ("MRS %0, psp_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Process Stack Pointer - \details Assigns the given value to the Process Stack Pointer (PSP). - \param [in] topOfProcStack Process Stack Pointer value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) -{ - __ASM volatile ("MSR psp, %0" : : "r" (topOfProcStack) : "sp"); -} - - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Set Process Stack Pointer (non-secure) - \details Assigns the given value to the non-secure Process Stack Pointer (PSP) when in secure state. - \param [in] topOfProcStack Process Stack Pointer value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSP_NS(uint32_t topOfProcStack) -{ - __ASM volatile ("MSR psp_ns, %0" : : "r" (topOfProcStack) : "sp"); -} -#endif - - -/** - \brief Get Main Stack Pointer - \details Returns the current value of the Main Stack Pointer (MSP). - \return MSP Register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSP(void) -{ - register uint32_t result; - - __ASM volatile ("MRS %0, msp" : "=r" (result) ); - return(result); -} - - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get Main Stack Pointer (non-secure) - \details Returns the current value of the non-secure Main Stack Pointer (MSP) when in secure state. - \return MSP Register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSP_NS(void) -{ - register uint32_t result; - - __ASM volatile ("MRS %0, msp_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Main Stack Pointer - \details Assigns the given value to the Main Stack Pointer (MSP). - \param [in] topOfMainStack Main Stack Pointer value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) -{ - __ASM volatile ("MSR msp, %0" : : "r" (topOfMainStack) : "sp"); -} - - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Set Main Stack Pointer (non-secure) - \details Assigns the given value to the non-secure Main Stack Pointer (MSP) when in secure state. - \param [in] topOfMainStack Main Stack Pointer value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSP_NS(uint32_t topOfMainStack) -{ - __ASM volatile ("MSR msp_ns, %0" : : "r" (topOfMainStack) : "sp"); -} -#endif - - -/** - \brief Get Priority Mask - \details Returns the current state of the priority mask bit from the Priority Mask Register. - \return Priority Mask value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PRIMASK(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, primask" : "=r" (result) ); - return(result); -} - - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get Priority Mask (non-secure) - \details Returns the current state of the non-secure priority mask bit from the Priority Mask Register when in secure state. - \return Priority Mask value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PRIMASK_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, primask_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Priority Mask - \details Assigns the given value to the Priority Mask Register. - \param [in] priMask Priority Mask - */ -__attribute__((always_inline)) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask) -{ - __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); -} - - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Set Priority Mask (non-secure) - \details Assigns the given value to the non-secure Priority Mask Register when in secure state. - \param [in] priMask Priority Mask - */ -__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PRIMASK_NS(uint32_t priMask) -{ - __ASM volatile ("MSR primask_ns, %0" : : "r" (priMask) : "memory"); -} -#endif - - -#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */ - -/** - \brief Enable FIQ - \details Enables FIQ interrupts by clearing the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -__attribute__((always_inline)) __STATIC_INLINE void __enable_fault_irq(void) -{ - __ASM volatile ("cpsie f" : : : "memory"); -} - - -/** - \brief Disable FIQ - \details Disables FIQ interrupts by setting the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -__attribute__((always_inline)) __STATIC_INLINE void __disable_fault_irq(void) -{ - __ASM volatile ("cpsid f" : : : "memory"); -} - - -/** - \brief Get Base Priority - \details Returns the current value of the Base Priority register. - \return Base Priority register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_BASEPRI(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, basepri" : "=r" (result) ); - return(result); -} - - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get Base Priority (non-secure) - \details Returns the current value of the non-secure Base Priority register when in secure state. - \return Base Priority register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_BASEPRI_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, basepri_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Base Priority - \details Assigns the given value to the Base Priority register. - \param [in] basePri Base Priority value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI(uint32_t value) -{ - __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory"); -} - - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Set Base Priority (non-secure) - \details Assigns the given value to the non-secure Base Priority register when in secure state. - \param [in] basePri Base Priority value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_NS(uint32_t value) -{ - __ASM volatile ("MSR basepri_ns, %0" : : "r" (value) : "memory"); -} -#endif - - -/** - \brief Set Base Priority with condition - \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, - or the new value increases the BASEPRI priority level. - \param [in] basePri Base Priority value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value) -{ - __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory"); -} - - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Set Base Priority with condition (non_secure) - \details Assigns the given value to the non-secure Base Priority register when in secure state only if BASEPRI masking is disabled, - or the new value increases the BASEPRI priority level. - \param [in] basePri Base Priority value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_BASEPRI_MAX_NS(uint32_t value) -{ - __ASM volatile ("MSR basepri_max_ns, %0" : : "r" (value) : "memory"); -} -#endif - - -/** - \brief Get Fault Mask - \details Returns the current value of the Fault Mask register. - \return Fault Mask register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FAULTMASK(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); - return(result); -} - - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get Fault Mask (non-secure) - \details Returns the current value of the non-secure Fault Mask register when in secure state. - \return Fault Mask register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FAULTMASK_NS(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, faultmask_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Fault Mask - \details Assigns the given value to the Fault Mask register. - \param [in] faultMask Fault Mask value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) -{ - __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); -} - - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Set Fault Mask (non-secure) - \details Assigns the given value to the non-secure Fault Mask register when in secure state. - \param [in] faultMask Fault Mask value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FAULTMASK_NS(uint32_t faultMask) -{ - __ASM volatile ("MSR faultmask_ns, %0" : : "r" (faultMask) : "memory"); -} -#endif - - -#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */ - - -#if (__ARM_ARCH_8M__ == 1U) - -/** - \brief Get Process Stack Pointer Limit - \details Returns the current value of the Process Stack Pointer Limit (PSPLIM). - \return PSPLIM Register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_PSPLIM(void) -{ - register uint32_t result; - - __ASM volatile ("MRS %0, psplim" : "=r" (result) ); - return(result); -} - - -#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */ -/** - \brief Get Process Stack Pointer Limit (non-secure) - \details Returns the current value of the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. - \return PSPLIM Register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_PSPLIM_NS(void) -{ - register uint32_t result; - - __ASM volatile ("MRS %0, psplim_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Process Stack Pointer Limit - \details Assigns the given value to the Process Stack Pointer Limit (PSPLIM). - \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __set_PSPLIM(uint32_t ProcStackPtrLimit) -{ - __ASM volatile ("MSR psplim, %0" : : "r" (ProcStackPtrLimit)); -} - - -#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */ -/** - \brief Set Process Stack Pointer (non-secure) - \details Assigns the given value to the non-secure Process Stack Pointer Limit (PSPLIM) when in secure state. - \param [in] ProcStackPtrLimit Process Stack Pointer Limit value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_PSPLIM_NS(uint32_t ProcStackPtrLimit) -{ - __ASM volatile ("MSR psplim_ns, %0\n" : : "r" (ProcStackPtrLimit)); -} -#endif - - -/** - \brief Get Main Stack Pointer Limit - \details Returns the current value of the Main Stack Pointer Limit (MSPLIM). - \return MSPLIM Register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_MSPLIM(void) -{ - register uint32_t result; - - __ASM volatile ("MRS %0, msplim" : "=r" (result) ); - - return(result); -} - - -#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */ -/** - \brief Get Main Stack Pointer Limit (non-secure) - \details Returns the current value of the non-secure Main Stack Pointer Limit(MSPLIM) when in secure state. - \return MSPLIM Register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_MSPLIM_NS(void) -{ - register uint32_t result; - - __ASM volatile ("MRS %0, msplim_ns" : "=r" (result) ); - return(result); -} -#endif - - -/** - \brief Set Main Stack Pointer Limit - \details Assigns the given value to the Main Stack Pointer Limit (MSPLIM). - \param [in] MainStackPtrLimit Main Stack Pointer Limit value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __set_MSPLIM(uint32_t MainStackPtrLimit) -{ - __ASM volatile ("MSR msplim, %0" : : "r" (MainStackPtrLimit)); -} - - -#if (__ARM_FEATURE_CMSE == 3U) && (__ARM_ARCH_PROFILE == 'M') /* ToDo: ARMCC_V6: check predefined macro for mainline */ -/** - \brief Set Main Stack Pointer Limit (non-secure) - \details Assigns the given value to the non-secure Main Stack Pointer Limit (MSPLIM) when in secure state. - \param [in] MainStackPtrLimit Main Stack Pointer value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_MSPLIM_NS(uint32_t MainStackPtrLimit) -{ - __ASM volatile ("MSR msplim_ns, %0" : : "r" (MainStackPtrLimit)); -} -#endif - -#endif /* (__ARM_ARCH_8M__ == 1U) */ - - -#if ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=4 */ - -/** - \brief Get FPSCR - \details eturns the current value of the Floating Point Status/Control register. - \return Floating Point Status/Control register value - */ -#define __get_FPSCR __builtin_arm_get_fpscr -#if 0 -__attribute__((always_inline)) __STATIC_INLINE uint32_t __get_FPSCR(void) -{ -#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) - uint32_t result; - - __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */ - __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); - __ASM volatile (""); - return(result); -#else - return(0); -#endif -} -#endif - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Get FPSCR (non-secure) - \details Returns the current value of the non-secure Floating Point Status/Control register when in secure state. - \return Floating Point Status/Control register value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __TZ_get_FPSCR_NS(void) -{ -#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) - uint32_t result; - - __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */ - __ASM volatile ("VMRS %0, fpscr_ns" : "=r" (result) ); - __ASM volatile (""); - return(result); -#else - return(0); -#endif -} -#endif - - -/** - \brief Set FPSCR - \details Assigns the given value to the Floating Point Status/Control register. - \param [in] fpscr Floating Point Status/Control value to set - */ -#define __set_FPSCR __builtin_arm_set_fpscr -#if 0 -__attribute__((always_inline)) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr) -{ -#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) - __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */ - __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc"); - __ASM volatile (""); -#endif -} -#endif - -#if (__ARM_FEATURE_CMSE == 3U) -/** - \brief Set FPSCR (non-secure) - \details Assigns the given value to the non-secure Floating Point Status/Control register when in secure state. - \param [in] fpscr Floating Point Status/Control value to set - */ -__attribute__((always_inline)) __STATIC_INLINE void __TZ_set_FPSCR_NS(uint32_t fpscr) -{ -#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) - __ASM volatile (""); /* Empty asm statement works as a scheduling barrier */ - __ASM volatile ("VMSR fpscr_ns, %0" : : "r" (fpscr) : "vfpcc"); - __ASM volatile (""); -#endif -} -#endif - -#endif /* ((__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */ - - - -/*@} end of CMSIS_Core_RegAccFunctions */ - - -/* ########################## Core Instruction Access ######################### */ -/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface - Access to dedicated instructions - @{ -*/ - -/* Define macros for porting to both thumb1 and thumb2. - * For thumb1, use low register (r0-r7), specified by constraint "l" - * Otherwise, use general registers, specified by constraint "r" */ -#if defined (__thumb__) && !defined (__thumb2__) -#define __CMSIS_GCC_OUT_REG(r) "=l" (r) -#define __CMSIS_GCC_USE_REG(r) "l" (r) -#else -#define __CMSIS_GCC_OUT_REG(r) "=r" (r) -#define __CMSIS_GCC_USE_REG(r) "r" (r) -#endif - -/** - \brief No Operation - \details No Operation does nothing. This instruction can be used for code alignment purposes. - */ -#define __NOP __builtin_arm_nop - -/** - \brief Wait For Interrupt - \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. - */ -#define __WFI __builtin_arm_wfi - - -/** - \brief Wait For Event - \details Wait For Event is a hint instruction that permits the processor to enter - a low-power state until one of a number of events occurs. - */ -#define __WFE __builtin_arm_wfe - - -/** - \brief Send Event - \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. - */ -#define __SEV __builtin_arm_sev - - -/** - \brief Instruction Synchronization Barrier - \details Instruction Synchronization Barrier flushes the pipeline in the processor, - so that all instructions following the ISB are fetched from cache or memory, - after the instruction has been completed. - */ -#define __ISB() __builtin_arm_isb(0xF); - -/** - \brief Data Synchronization Barrier - \details Acts as a special kind of Data Memory Barrier. - It completes when all explicit memory accesses before this instruction complete. - */ -#define __DSB() __builtin_arm_dsb(0xF); - - -/** - \brief Data Memory Barrier - \details Ensures the apparent order of the explicit memory operations before - and after the instruction, without ensuring their completion. - */ -#define __DMB() __builtin_arm_dmb(0xF); - - -/** - \brief Reverse byte order (32 bit) - \details Reverses the byte order in integer value. - \param [in] value Value to reverse - \return Reversed value - */ -#define __REV __builtin_bswap32 - - -/** - \brief Reverse byte order (16 bit) - \details Reverses the byte order in two unsigned short values. - \param [in] value Value to reverse - \return Reversed value - */ -#define __REV16 __builtin_bswap16 /* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */ -#if 0 -__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value) -{ - uint32_t result; - - __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return(result); -} -#endif - - -/** - \brief Reverse byte order in signed short value - \details Reverses the byte order in a signed short value with sign extension to integer. - \param [in] value Value to reverse - \return Reversed value - */ - /* ToDo: ARMCC_V6: check if __builtin_bswap16 could be used */ -__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value) -{ - int32_t result; - - __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return(result); -} - - -/** - \brief Rotate Right in unsigned value (32 bit) - \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. - \param [in] op1 Value to rotate - \param [in] op2 Number of Bits to rotate - \return Rotated value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2) -{ - return (op1 >> op2) | (op1 << (32U - op2)); -} - - -/** - \brief Breakpoint - \details Causes the processor to enter Debug state. - Debug tools can use this to investigate system state when the instruction at a particular address is reached. - \param [in] value is ignored by the processor. - If required, a debugger can use it to store additional information about the breakpoint. - */ -#define __BKPT(value) __ASM volatile ("bkpt "#value) - - -/** - \brief Reverse bit order of value - \details Reverses the bit order of the given value. - \param [in] value Value to reverse - \return Reversed value - */ - /* ToDo: ARMCC_V6: check if __builtin_arm_rbit is supported */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) -{ - uint32_t result; - -#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */ - __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); -#else - int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */ - - result = value; /* r will be reversed bits of v; first get LSB of v */ - for (value >>= 1U; value; value >>= 1U) - { - result <<= 1U; - result |= value & 1U; - s--; - } - result <<= s; /* shift when v's highest bits are zero */ -#endif - return(result); -} - - -/** - \brief Count leading zeros - \details Counts the number of leading zeros of a data value. - \param [in] value Value to count the leading zeros - \return number of leading zeros in value - */ -#define __CLZ __builtin_clz - - -#if ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) /* ToDo: ARMCC_V6: check if this is ok for cortex >=3 */ - -/** - \brief LDR Exclusive (8 bit) - \details Executes a exclusive LDR instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -#define __LDREXB (uint8_t)__builtin_arm_ldrex - - -/** - \brief LDR Exclusive (16 bit) - \details Executes a exclusive LDR instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -#define __LDREXH (uint16_t)__builtin_arm_ldrex - - -/** - \brief LDR Exclusive (32 bit) - \details Executes a exclusive LDR instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -#define __LDREXW (uint32_t)__builtin_arm_ldrex - - -/** - \brief STR Exclusive (8 bit) - \details Executes a exclusive STR instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STREXB (uint32_t)__builtin_arm_strex - - -/** - \brief STR Exclusive (16 bit) - \details Executes a exclusive STR instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STREXH (uint32_t)__builtin_arm_strex - - -/** - \brief STR Exclusive (32 bit) - \details Executes a exclusive STR instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STREXW (uint32_t)__builtin_arm_strex - - -/** - \brief Remove the exclusive lock - \details Removes the exclusive lock which is created by LDREX. - */ -#define __CLREX __builtin_arm_clrex - - -/** - \brief Signed Saturate - \details Saturates a signed value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (1..32) - \return Saturated value - */ -/*#define __SSAT __builtin_arm_ssat*/ -#define __SSAT(ARG1,ARG2) \ -({ \ - int32_t __RES, __ARG1 = (ARG1); \ - __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - - -/** - \brief Unsigned Saturate - \details Saturates an unsigned value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (0..31) - \return Saturated value - */ -#define __USAT __builtin_arm_usat -#if 0 -#define __USAT(ARG1,ARG2) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) -#endif - - -/** - \brief Rotate Right with Extend (32 bit) - \details Moves each bit of a bitstring right by one bit. - The carry input is shifted in at the left end of the bitstring. - \param [in] value Value to rotate - \return Rotated value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value) -{ - uint32_t result; - - __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return(result); -} - - -/** - \brief LDRT Unprivileged (8 bit) - \details Executes a Unprivileged LDRT instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*ptr) ); - return ((uint8_t) result); /* Add explicit type cast here */ -} - - -/** - \brief LDRT Unprivileged (16 bit) - \details Executes a Unprivileged LDRT instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*ptr) ); - return ((uint16_t) result); /* Add explicit type cast here */ -} - - -/** - \brief LDRT Unprivileged (32 bit) - \details Executes a Unprivileged LDRT instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*ptr) ); - return(result); -} - - -/** - \brief STRT Unprivileged (8 bit) - \details Executes a Unprivileged STRT instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *ptr) -{ - __ASM volatile ("strbt %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief STRT Unprivileged (16 bit) - \details Executes a Unprivileged STRT instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *ptr) -{ - __ASM volatile ("strht %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief STRT Unprivileged (32 bit) - \details Executes a Unprivileged STRT instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *ptr) -{ - __ASM volatile ("strt %1, %0" : "=Q" (*ptr) : "r" (value) ); -} - -#endif /* ((__ARM_ARCH_7M__ == 1U) || (__ARM_ARCH_7EM__ == 1U) || (__ARM_ARCH_8M__ == 1U)) */ - - -#if (__ARM_ARCH_8M__ == 1U) - -/** - \brief Load-Acquire (8 bit) - \details Executes a LDAB instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDAB(volatile uint8_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldab %0, %1" : "=r" (result) : "Q" (*ptr) ); - return ((uint8_t) result); -} - - -/** - \brief Load-Acquire (16 bit) - \details Executes a LDAH instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDAH(volatile uint16_t *ptr) -{ - uint32_t result; - - __ASM volatile ("ldah %0, %1" : "=r" (result) : "Q" (*ptr) ); - return ((uint16_t) result); -} - - -/** - \brief Load-Acquire (32 bit) - \details Executes a LDA instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDA(volatile uint32_t *ptr) -{ - uint32_t result; - - __ASM volatile ("lda %0, %1" : "=r" (result) : "Q" (*ptr) ); - return(result); -} - - -/** - \brief Store-Release (8 bit) - \details Executes a STLB instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__attribute__((always_inline)) __STATIC_INLINE void __STLB(uint8_t value, volatile uint8_t *ptr) -{ - __ASM volatile ("stlb %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief Store-Release (16 bit) - \details Executes a STLH instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__attribute__((always_inline)) __STATIC_INLINE void __STLH(uint16_t value, volatile uint16_t *ptr) -{ - __ASM volatile ("stlh %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief Store-Release (32 bit) - \details Executes a STL instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__attribute__((always_inline)) __STATIC_INLINE void __STL(uint32_t value, volatile uint32_t *ptr) -{ - __ASM volatile ("stl %1, %0" : "=Q" (*ptr) : "r" ((uint32_t)value) ); -} - - -/** - \brief Load-Acquire Exclusive (8 bit) - \details Executes a LDAB exclusive instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -#define __LDAEXB (uint8_t)__builtin_arm_ldaex - - -/** - \brief Load-Acquire Exclusive (16 bit) - \details Executes a LDAH exclusive instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -#define __LDAEXH (uint16_t)__builtin_arm_ldaex - - -/** - \brief Load-Acquire Exclusive (32 bit) - \details Executes a LDA exclusive instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -#define __LDAEX (uint32_t)__builtin_arm_ldaex - - -/** - \brief Store-Release Exclusive (8 bit) - \details Executes a STLB exclusive instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STLEXB (uint32_t)__builtin_arm_stlex - - -/** - \brief Store-Release Exclusive (16 bit) - \details Executes a STLH exclusive instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STLEXH (uint32_t)__builtin_arm_stlex - - -/** - \brief Store-Release Exclusive (32 bit) - \details Executes a STL exclusive instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -#define __STLEX (uint32_t)__builtin_arm_stlex - -#endif /* (__ARM_ARCH_8M__ == 1U) */ - -/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ - - -/* ################### Compiler specific Intrinsics ########################### */ -/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics - Access to dedicated SIMD instructions - @{ -*/ - -#if (__ARM_FEATURE_DSP == 1U) /* ToDo: ARMCC_V6: This should be ARCH >= ARMv7-M + SIMD */ - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -#define __SSAT16(ARG1,ARG2) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - -#define __USAT16(ARG1,ARG2) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1) -{ - uint32_t result; - - __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1) -{ - uint32_t result; - - __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__attribute__((always_inline)) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE int32_t __QADD( int32_t op1, int32_t op2) -{ - int32_t result; - - __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__((always_inline)) __STATIC_INLINE int32_t __QSUB( int32_t op1, int32_t op2) -{ - int32_t result; - - __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -#define __PKHBT(ARG1,ARG2,ARG3) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ - __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ - __RES; \ - }) - -#define __PKHTB(ARG1,ARG2,ARG3) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ - if (ARG3 == 0) \ - __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ - else \ - __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ - __RES; \ - }) - -__attribute__((always_inline)) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) -{ - int32_t result; - - __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -#endif /* (__ARM_FEATURE_DSP == 1U) */ -/*@} end of group CMSIS_SIMD_intrinsics */ - - -#endif /* __CMSIS_ARMCC_V6_H */ diff --git a/stm32cubemx/Drivers/CMSIS/Include/cmsis_gcc.h b/stm32cubemx/Drivers/CMSIS/Include/cmsis_gcc.h deleted file mode 100644 index bb89fbb..0000000 --- a/stm32cubemx/Drivers/CMSIS/Include/cmsis_gcc.h +++ /dev/null @@ -1,1373 +0,0 @@ -/**************************************************************************//** - * @file cmsis_gcc.h - * @brief CMSIS Cortex-M Core Function/Instruction Header File - * @version V4.30 - * @date 20. October 2015 - ******************************************************************************/ -/* Copyright (c) 2009 - 2015 ARM LIMITED - - All rights reserved. - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - Neither the name of ARM nor the names of its contributors may be used - to endorse or promote products derived from this software without - specific prior written permission. - * - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - ---------------------------------------------------------------------------*/ - - -#ifndef __CMSIS_GCC_H -#define __CMSIS_GCC_H - -/* ignore some GCC warnings */ -#if defined ( __GNUC__ ) -#pragma GCC diagnostic push -#pragma GCC diagnostic ignored "-Wsign-conversion" -#pragma GCC diagnostic ignored "-Wconversion" -#pragma GCC diagnostic ignored "-Wunused-parameter" -#endif - - -/* ########################### Core Function Access ########################### */ -/** \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions - @{ - */ - -/** - \brief Enable IRQ Interrupts - \details Enables IRQ interrupts by clearing the I-bit in the CPSR. - Can only be executed in Privileged modes. - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void) -{ - __ASM volatile ("cpsie i" : : : "memory"); -} - - -/** - \brief Disable IRQ Interrupts - \details Disables IRQ interrupts by setting the I-bit in the CPSR. - Can only be executed in Privileged modes. - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void) -{ - __ASM volatile ("cpsid i" : : : "memory"); -} - - -/** - \brief Get Control Register - \details Returns the content of the Control Register. - \return Control Register value - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, control" : "=r" (result) ); - return(result); -} - - -/** - \brief Set Control Register - \details Writes the given value to the Control Register. - \param [in] control Control Register value to set - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control) -{ - __ASM volatile ("MSR control, %0" : : "r" (control) : "memory"); -} - - -/** - \brief Get IPSR Register - \details Returns the content of the IPSR Register. - \return IPSR Register value - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, ipsr" : "=r" (result) ); - return(result); -} - - -/** - \brief Get APSR Register - \details Returns the content of the APSR Register. - \return APSR Register value - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, apsr" : "=r" (result) ); - return(result); -} - - -/** - \brief Get xPSR Register - \details Returns the content of the xPSR Register. - - \return xPSR Register value - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, xpsr" : "=r" (result) ); - return(result); -} - - -/** - \brief Get Process Stack Pointer - \details Returns the current value of the Process Stack Pointer (PSP). - \return PSP Register value - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void) -{ - register uint32_t result; - - __ASM volatile ("MRS %0, psp\n" : "=r" (result) ); - return(result); -} - - -/** - \brief Set Process Stack Pointer - \details Assigns the given value to the Process Stack Pointer (PSP). - \param [in] topOfProcStack Process Stack Pointer value to set - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack) -{ - __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp"); -} - - -/** - \brief Get Main Stack Pointer - \details Returns the current value of the Main Stack Pointer (MSP). - \return MSP Register value - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void) -{ - register uint32_t result; - - __ASM volatile ("MRS %0, msp\n" : "=r" (result) ); - return(result); -} - - -/** - \brief Set Main Stack Pointer - \details Assigns the given value to the Main Stack Pointer (MSP). - - \param [in] topOfMainStack Main Stack Pointer value to set - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack) -{ - __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp"); -} - - -/** - \brief Get Priority Mask - \details Returns the current state of the priority mask bit from the Priority Mask Register. - \return Priority Mask value - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, primask" : "=r" (result) ); - return(result); -} - - -/** - \brief Set Priority Mask - \details Assigns the given value to the Priority Mask Register. - \param [in] priMask Priority Mask - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask) -{ - __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory"); -} - - -#if (__CORTEX_M >= 0x03U) - -/** - \brief Enable FIQ - \details Enables FIQ interrupts by clearing the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void) -{ - __ASM volatile ("cpsie f" : : : "memory"); -} - - -/** - \brief Disable FIQ - \details Disables FIQ interrupts by setting the F-bit in the CPSR. - Can only be executed in Privileged modes. - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void) -{ - __ASM volatile ("cpsid f" : : : "memory"); -} - - -/** - \brief Get Base Priority - \details Returns the current value of the Base Priority register. - \return Base Priority register value - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, basepri" : "=r" (result) ); - return(result); -} - - -/** - \brief Set Base Priority - \details Assigns the given value to the Base Priority register. - \param [in] basePri Base Priority value to set - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value) -{ - __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory"); -} - - -/** - \brief Set Base Priority with condition - \details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled, - or the new value increases the BASEPRI priority level. - \param [in] basePri Base Priority value to set - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value) -{ - __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory"); -} - - -/** - \brief Get Fault Mask - \details Returns the current value of the Fault Mask register. - \return Fault Mask register value - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void) -{ - uint32_t result; - - __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); - return(result); -} - - -/** - \brief Set Fault Mask - \details Assigns the given value to the Fault Mask register. - \param [in] faultMask Fault Mask value to set - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask) -{ - __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory"); -} - -#endif /* (__CORTEX_M >= 0x03U) */ - - -#if (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) - -/** - \brief Get FPSCR - \details Returns the current value of the Floating Point Status/Control register. - \return Floating Point Status/Control register value - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void) -{ -#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) - uint32_t result; - - /* Empty asm statement works as a scheduling barrier */ - __ASM volatile (""); - __ASM volatile ("VMRS %0, fpscr" : "=r" (result) ); - __ASM volatile (""); - return(result); -#else - return(0); -#endif -} - - -/** - \brief Set FPSCR - \details Assigns the given value to the Floating Point Status/Control register. - \param [in] fpscr Floating Point Status/Control value to set - */ -__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr) -{ -#if (__FPU_PRESENT == 1U) && (__FPU_USED == 1U) - /* Empty asm statement works as a scheduling barrier */ - __ASM volatile (""); - __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc"); - __ASM volatile (""); -#endif -} - -#endif /* (__CORTEX_M == 0x04U) || (__CORTEX_M == 0x07U) */ - - - -/*@} end of CMSIS_Core_RegAccFunctions */ - - -/* ########################## Core Instruction Access ######################### */ -/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface - Access to dedicated instructions - @{ -*/ - -/* Define macros for porting to both thumb1 and thumb2. - * For thumb1, use low register (r0-r7), specified by constraint "l" - * Otherwise, use general registers, specified by constraint "r" */ -#if defined (__thumb__) && !defined (__thumb2__) -#define __CMSIS_GCC_OUT_REG(r) "=l" (r) -#define __CMSIS_GCC_USE_REG(r) "l" (r) -#else -#define __CMSIS_GCC_OUT_REG(r) "=r" (r) -#define __CMSIS_GCC_USE_REG(r) "r" (r) -#endif - -/** - \brief No Operation - \details No Operation does nothing. This instruction can be used for code alignment purposes. - */ -__attribute__((always_inline)) __STATIC_INLINE void __NOP(void) -{ - __ASM volatile ("nop"); -} - - -/** - \brief Wait For Interrupt - \details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs. - */ -__attribute__((always_inline)) __STATIC_INLINE void __WFI(void) -{ - __ASM volatile ("wfi"); -} - - -/** - \brief Wait For Event - \details Wait For Event is a hint instruction that permits the processor to enter - a low-power state until one of a number of events occurs. - */ -__attribute__((always_inline)) __STATIC_INLINE void __WFE(void) -{ - __ASM volatile ("wfe"); -} - - -/** - \brief Send Event - \details Send Event is a hint instruction. It causes an event to be signaled to the CPU. - */ -__attribute__((always_inline)) __STATIC_INLINE void __SEV(void) -{ - __ASM volatile ("sev"); -} - - -/** - \brief Instruction Synchronization Barrier - \details Instruction Synchronization Barrier flushes the pipeline in the processor, - so that all instructions following the ISB are fetched from cache or memory, - after the instruction has been completed. - */ -__attribute__((always_inline)) __STATIC_INLINE void __ISB(void) -{ - __ASM volatile ("isb 0xF":::"memory"); -} - - -/** - \brief Data Synchronization Barrier - \details Acts as a special kind of Data Memory Barrier. - It completes when all explicit memory accesses before this instruction complete. - */ -__attribute__((always_inline)) __STATIC_INLINE void __DSB(void) -{ - __ASM volatile ("dsb 0xF":::"memory"); -} - - -/** - \brief Data Memory Barrier - \details Ensures the apparent order of the explicit memory operations before - and after the instruction, without ensuring their completion. - */ -__attribute__((always_inline)) __STATIC_INLINE void __DMB(void) -{ - __ASM volatile ("dmb 0xF":::"memory"); -} - - -/** - \brief Reverse byte order (32 bit) - \details Reverses the byte order in integer value. - \param [in] value Value to reverse - \return Reversed value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV(uint32_t value) -{ -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5) - return __builtin_bswap32(value); -#else - uint32_t result; - - __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return(result); -#endif -} - - -/** - \brief Reverse byte order (16 bit) - \details Reverses the byte order in two unsigned short values. - \param [in] value Value to reverse - \return Reversed value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value) -{ - uint32_t result; - - __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return(result); -} - - -/** - \brief Reverse byte order in signed short value - \details Reverses the byte order in a signed short value with sign extension to integer. - \param [in] value Value to reverse - \return Reversed value - */ -__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value) -{ -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - return (short)__builtin_bswap16(value); -#else - int32_t result; - - __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return(result); -#endif -} - - -/** - \brief Rotate Right in unsigned value (32 bit) - \details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits. - \param [in] value Value to rotate - \param [in] value Number of Bits to rotate - \return Rotated value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2) -{ - return (op1 >> op2) | (op1 << (32U - op2)); -} - - -/** - \brief Breakpoint - \details Causes the processor to enter Debug state. - Debug tools can use this to investigate system state when the instruction at a particular address is reached. - \param [in] value is ignored by the processor. - If required, a debugger can use it to store additional information about the breakpoint. - */ -#define __BKPT(value) __ASM volatile ("bkpt "#value) - - -/** - \brief Reverse bit order of value - \details Reverses the bit order of the given value. - \param [in] value Value to reverse - \return Reversed value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value) -{ - uint32_t result; - -#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) - __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); -#else - int32_t s = 4 /*sizeof(v)*/ * 8 - 1; /* extra shift needed at end */ - - result = value; /* r will be reversed bits of v; first get LSB of v */ - for (value >>= 1U; value; value >>= 1U) - { - result <<= 1U; - result |= value & 1U; - s--; - } - result <<= s; /* shift when v's highest bits are zero */ -#endif - return(result); -} - - -/** - \brief Count leading zeros - \details Counts the number of leading zeros of a data value. - \param [in] value Value to count the leading zeros - \return number of leading zeros in value - */ -#define __CLZ __builtin_clz - - -#if (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) - -/** - \brief LDR Exclusive (8 bit) - \details Executes a exclusive LDR instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr) -{ - uint32_t result; - -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) ); -#else - /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not - accepted by assembler. So has to use following less efficient pattern. - */ - __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); -#endif - return ((uint8_t) result); /* Add explicit type cast here */ -} - - -/** - \brief LDR Exclusive (16 bit) - \details Executes a exclusive LDR instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr) -{ - uint32_t result; - -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) ); -#else - /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not - accepted by assembler. So has to use following less efficient pattern. - */ - __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); -#endif - return ((uint16_t) result); /* Add explicit type cast here */ -} - - -/** - \brief LDR Exclusive (32 bit) - \details Executes a exclusive LDR instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr) -{ - uint32_t result; - - __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) ); - return(result); -} - - -/** - \brief STR Exclusive (8 bit) - \details Executes a exclusive STR instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr) -{ - uint32_t result; - - __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); - return(result); -} - - -/** - \brief STR Exclusive (16 bit) - \details Executes a exclusive STR instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr) -{ - uint32_t result; - - __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) ); - return(result); -} - - -/** - \brief STR Exclusive (32 bit) - \details Executes a exclusive STR instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - \return 0 Function succeeded - \return 1 Function failed - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr) -{ - uint32_t result; - - __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) ); - return(result); -} - - -/** - \brief Remove the exclusive lock - \details Removes the exclusive lock which is created by LDREX. - */ -__attribute__((always_inline)) __STATIC_INLINE void __CLREX(void) -{ - __ASM volatile ("clrex" ::: "memory"); -} - - -/** - \brief Signed Saturate - \details Saturates a signed value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (1..32) - \return Saturated value - */ -#define __SSAT(ARG1,ARG2) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - - -/** - \brief Unsigned Saturate - \details Saturates an unsigned value. - \param [in] value Value to be saturated - \param [in] sat Bit position to saturate to (0..31) - \return Saturated value - */ -#define __USAT(ARG1,ARG2) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - - -/** - \brief Rotate Right with Extend (32 bit) - \details Moves each bit of a bitstring right by one bit. - The carry input is shifted in at the left end of the bitstring. - \param [in] value Value to rotate - \return Rotated value - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value) -{ - uint32_t result; - - __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) ); - return(result); -} - - -/** - \brief LDRT Unprivileged (8 bit) - \details Executes a Unprivileged LDRT instruction for 8 bit value. - \param [in] ptr Pointer to data - \return value of type uint8_t at (*ptr) - */ -__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *addr) -{ - uint32_t result; - -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*addr) ); -#else - /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not - accepted by assembler. So has to use following less efficient pattern. - */ - __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); -#endif - return ((uint8_t) result); /* Add explicit type cast here */ -} - - -/** - \brief LDRT Unprivileged (16 bit) - \details Executes a Unprivileged LDRT instruction for 16 bit values. - \param [in] ptr Pointer to data - \return value of type uint16_t at (*ptr) - */ -__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *addr) -{ - uint32_t result; - -#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8) - __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*addr) ); -#else - /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not - accepted by assembler. So has to use following less efficient pattern. - */ - __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (addr) : "memory" ); -#endif - return ((uint16_t) result); /* Add explicit type cast here */ -} - - -/** - \brief LDRT Unprivileged (32 bit) - \details Executes a Unprivileged LDRT instruction for 32 bit values. - \param [in] ptr Pointer to data - \return value of type uint32_t at (*ptr) - */ -__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *addr) -{ - uint32_t result; - - __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*addr) ); - return(result); -} - - -/** - \brief STRT Unprivileged (8 bit) - \details Executes a Unprivileged STRT instruction for 8 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *addr) -{ - __ASM volatile ("strbt %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) ); -} - - -/** - \brief STRT Unprivileged (16 bit) - \details Executes a Unprivileged STRT instruction for 16 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *addr) -{ - __ASM volatile ("strht %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) ); -} - - -/** - \brief STRT Unprivileged (32 bit) - \details Executes a Unprivileged STRT instruction for 32 bit values. - \param [in] value Value to store - \param [in] ptr Pointer to location - */ -__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *addr) -{ - __ASM volatile ("strt %1, %0" : "=Q" (*addr) : "r" (value) ); -} - -#endif /* (__CORTEX_M >= 0x03U) || (__CORTEX_SC >= 300U) */ - -/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ - - -/* ################### Compiler specific Intrinsics ########################### */ -/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics - Access to dedicated SIMD instructions - @{ -*/ - -#if (__CORTEX_M >= 0x04U) /* only for Cortex-M4 and above */ - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -#define __SSAT16(ARG1,ARG2) \ -({ \ - int32_t __RES, __ARG1 = (ARG1); \ - __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - -#define __USAT16(ARG1,ARG2) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1); \ - __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \ - __RES; \ - }) - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1) -{ - uint32_t result; - - __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1)); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1) -{ - uint32_t result; - - __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1)); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3) -{ - uint32_t result; - - __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc) -{ - union llreg_u{ - uint32_t w32[2]; - uint64_t w64; - } llr; - llr.w64 = acc; - -#ifndef __ARMEB__ /* Little endian */ - __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) ); -#else /* Big endian */ - __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) ); -#endif - - return(llr.w64); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2) -{ - uint32_t result; - - __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __QADD( int32_t op1, int32_t op2) -{ - int32_t result; - - __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __QSUB( int32_t op1, int32_t op2) -{ - int32_t result; - - __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) ); - return(result); -} - -#define __PKHBT(ARG1,ARG2,ARG3) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ - __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ - __RES; \ - }) - -#define __PKHTB(ARG1,ARG2,ARG3) \ -({ \ - uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \ - if (ARG3 == 0) \ - __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \ - else \ - __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \ - __RES; \ - }) - -__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3) -{ - int32_t result; - - __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) ); - return(result); -} - -#endif /* (__CORTEX_M >= 0x04) */ -/*@} end of group CMSIS_SIMD_intrinsics */ - - -#if defined ( __GNUC__ ) -#pragma GCC diagnostic pop -#endif - -#endif /* __CMSIS_GCC_H */ diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_cm0.h b/stm32cubemx/Drivers/CMSIS/Include/core_cm0.h deleted file mode 100644 index 711dad5..0000000 --- a/stm32cubemx/Drivers/CMSIS/Include/core_cm0.h +++ /dev/null @@ -1,798 +0,0 @@ -/**************************************************************************//** - * @file core_cm0.h - * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File - * @version V4.30 - * @date 20. October 2015 - ******************************************************************************/ -/* Copyright (c) 2009 - 2015 ARM LIMITED - - All rights reserved. - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - Neither the name of ARM nor the names of its contributors may be used - to endorse or promote products derived from this software without - specific prior written permission. - * - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - ---------------------------------------------------------------------------*/ - - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM0_H_GENERIC -#define __CORE_CM0_H_GENERIC - -#include <stdint.h> - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.<br> - Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> - Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.<br> - Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M0 - @{ - */ - -/* CMSIS CM0 definitions */ -#define __CM0_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */ -#define __CM0_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */ -#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \ - __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ - -#define __CORTEX_M (0x00U) /*!< Cortex-M Core */ - - -#if defined ( __CC_ARM ) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline - -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline - -#elif defined ( __GNUC__ ) - #define __ASM __asm /*!< asm keyword for GNU Compiler */ - #define __INLINE inline /*!< inline keyword for GNU Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __ICCARM__ ) - #define __ASM __asm /*!< asm keyword for IAR Compiler */ - #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ - #define __STATIC_INLINE static inline - -#elif defined ( __TMS470__ ) - #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __TASKING__ ) - #define __ASM __asm /*!< asm keyword for TASKING Compiler */ - #define __INLINE inline /*!< inline keyword for TASKING Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __CSMC__ ) - #define __packed - #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ - #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */ - #define __STATIC_INLINE static inline - -#else - #error Unknown compiler -#endif - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TMS470__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "core_cmInstr.h" /* Core Instruction Access */ -#include "core_cmFunc.h" /* Core Function Access */ - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM0_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM0_H_DEPENDANT -#define __CORE_CM0_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM0_REV - #define __CM0_REV 0x0000U - #warning "__CM0_REV not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - <strong>IO Type Qualifiers</strong> are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M0 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t _reserved0:1; /*!< bit: 0 Reserved */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[31U]; - __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31U]; - __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[31U]; - __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[31U]; - uint32_t RESERVED4[64U]; - __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - uint32_t RESERVED0; - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED1; - __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. - Therefore they are not covered by the Cortex-M0 header file. - @{ - */ -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Cortex-M0 Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -/* Interrupt Priorities are WORD accessible only under ARMv6M */ -/* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) -#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) -#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) - - -/** - \brief Enable External Interrupt - \details Enables a device-specific interrupt in the NVIC interrupt controller. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) -{ - NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Disable External Interrupt - \details Disables a device-specific interrupt in the NVIC interrupt controller. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) -{ - NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Get Pending Interrupt - \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt. - \param [in] IRQn Interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - */ -__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of an external interrupt. - \param [in] IRQn Interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of an external interrupt. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of an interrupt. - \note The priority cannot be set for every core interrupt. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - */ -__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) < 0) - { - SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of an interrupt. - The interrupt number can be positive to specify an external (device specific) interrupt, - or negative to specify an internal (core) interrupt. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) < 0) - { - return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__STATIC_INLINE void NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the - function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM0_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_cm0plus.h b/stm32cubemx/Drivers/CMSIS/Include/core_cm0plus.h deleted file mode 100644 index b04aa39..0000000 --- a/stm32cubemx/Drivers/CMSIS/Include/core_cm0plus.h +++ /dev/null @@ -1,914 +0,0 @@ -/**************************************************************************//** - * @file core_cm0plus.h - * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File - * @version V4.30 - * @date 20. October 2015 - ******************************************************************************/ -/* Copyright (c) 2009 - 2015 ARM LIMITED - - All rights reserved. - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - Neither the name of ARM nor the names of its contributors may be used - to endorse or promote products derived from this software without - specific prior written permission. - * - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - ---------------------------------------------------------------------------*/ - - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM0PLUS_H_GENERIC -#define __CORE_CM0PLUS_H_GENERIC - -#include <stdint.h> - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.<br> - Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> - Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.<br> - Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex-M0+ - @{ - */ - -/* CMSIS CM0+ definitions */ -#define __CM0PLUS_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */ -#define __CM0PLUS_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */ -#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16U) | \ - __CM0PLUS_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ - -#define __CORTEX_M (0x00U) /*!< Cortex-M Core */ - - -#if defined ( __CC_ARM ) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline - -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline - -#elif defined ( __GNUC__ ) - #define __ASM __asm /*!< asm keyword for GNU Compiler */ - #define __INLINE inline /*!< inline keyword for GNU Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __ICCARM__ ) - #define __ASM __asm /*!< asm keyword for IAR Compiler */ - #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ - #define __STATIC_INLINE static inline - -#elif defined ( __TMS470__ ) - #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __TASKING__ ) - #define __ASM __asm /*!< asm keyword for TASKING Compiler */ - #define __INLINE inline /*!< inline keyword for TASKING Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __CSMC__ ) - #define __packed - #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ - #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */ - #define __STATIC_INLINE static inline - -#else - #error Unknown compiler -#endif - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TMS470__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "core_cmInstr.h" /* Core Instruction Access */ -#include "core_cmFunc.h" /* Core Function Access */ - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM0PLUS_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM0PLUS_H_DEPENDANT -#define __CORE_CM0PLUS_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM0PLUS_REV - #define __CM0PLUS_REV 0x0000U - #warning "__CM0PLUS_REV not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __VTOR_PRESENT - #define __VTOR_PRESENT 0U - #warning "__VTOR_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - <strong>IO Type Qualifiers</strong> are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex-M0+ */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core MPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[31U]; - __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31U]; - __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[31U]; - __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[31U]; - uint32_t RESERVED4[64U]; - __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ -#if (__VTOR_PRESENT == 1U) - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ -#else - uint32_t RESERVED0; -#endif - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED1; - __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -#if (__VTOR_PRESENT == 1U) -/* SCB Interrupt Control State Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 8U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ -#endif - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - -#if (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ -} MPU_Type; - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. - Therefore they are not covered by the Cortex-M0+ header file. - @{ - */ -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Cortex-M0+ Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - -#if (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -/* Interrupt Priorities are WORD accessible only under ARMv6M */ -/* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) -#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) -#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) - - -/** - \brief Enable External Interrupt - \details Enables a device-specific interrupt in the NVIC interrupt controller. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) -{ - NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Disable External Interrupt - \details Disables a device-specific interrupt in the NVIC interrupt controller. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) -{ - NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Get Pending Interrupt - \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt. - \param [in] IRQn Interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - */ -__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of an external interrupt. - \param [in] IRQn Interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of an external interrupt. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of an interrupt. - \note The priority cannot be set for every core interrupt. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - */ -__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) < 0) - { - SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of an interrupt. - The interrupt number can be positive to specify an external (device specific) interrupt, - or negative to specify an internal (core) interrupt. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) < 0) - { - return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__STATIC_INLINE void NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the - function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM0PLUS_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_cm3.h b/stm32cubemx/Drivers/CMSIS/Include/core_cm3.h deleted file mode 100644 index b4ac4c7..0000000 --- a/stm32cubemx/Drivers/CMSIS/Include/core_cm3.h +++ /dev/null @@ -1,1763 +0,0 @@ -/**************************************************************************//** - * @file core_cm3.h - * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File - * @version V4.30 - * @date 20. October 2015 - ******************************************************************************/ -/* Copyright (c) 2009 - 2015 ARM LIMITED - - All rights reserved. - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - Neither the name of ARM nor the names of its contributors may be used - to endorse or promote products derived from this software without - specific prior written permission. - * - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - ---------------------------------------------------------------------------*/ - - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM3_H_GENERIC -#define __CORE_CM3_H_GENERIC - -#include <stdint.h> - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.<br> - Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> - Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.<br> - Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M3 - @{ - */ - -/* CMSIS CM3 definitions */ -#define __CM3_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */ -#define __CM3_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */ -#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16U) | \ - __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ - -#define __CORTEX_M (0x03U) /*!< Cortex-M Core */ - - -#if defined ( __CC_ARM ) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline - -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline - -#elif defined ( __GNUC__ ) - #define __ASM __asm /*!< asm keyword for GNU Compiler */ - #define __INLINE inline /*!< inline keyword for GNU Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __ICCARM__ ) - #define __ASM __asm /*!< asm keyword for IAR Compiler */ - #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ - #define __STATIC_INLINE static inline - -#elif defined ( __TMS470__ ) - #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __TASKING__ ) - #define __ASM __asm /*!< asm keyword for TASKING Compiler */ - #define __INLINE inline /*!< inline keyword for TASKING Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __CSMC__ ) - #define __packed - #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ - #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */ - #define __STATIC_INLINE static inline - -#else - #error Unknown compiler -#endif - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TMS470__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "core_cmInstr.h" /* Core Instruction Access */ -#include "core_cmFunc.h" /* Core Function Access */ - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM3_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM3_H_DEPENDANT -#define __CORE_CM3_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM3_REV - #define __CM3_REV 0x0200U - #warning "__CM3_REV not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 4U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - <strong>IO Type Qualifiers</strong> are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M3 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - -#define APSR_Q_Pos 27U /*!< APSR: Q Position */ -#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ -#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ - -#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ -#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[24U]; - __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; - __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[24U]; - __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[24U]; - __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[56U]; - __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED5[644U]; - __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; - -/* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - uint32_t RESERVED0[5U]; - __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Vector Table Offset Register Definitions */ -#if (__CM3_REV < 0x0201U) /* core r2p1 */ -#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ -#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ - -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ -#else -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ -#endif - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ -#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ -#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ - -#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ - -#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ - -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ - -#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ - -#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ - -#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ - -/* SCB Configurable Fault Status Register Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ - -#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ - -#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ - -/* SCB Hard Fault Status Register Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ - -#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ - -#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ - -/* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ - -#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ - -#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ - -#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ - -#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ -#if ((defined __CM3_REV) && (__CM3_REV >= 0x200U)) - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ -#else - uint32_t RESERVED1[1U]; -#endif -} SCnSCB_Type; - -/* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ - -/* Auxiliary Control Register Definitions */ - -#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ -#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ - -#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ -#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ - -#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ -#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) - \brief Type definitions for the Instrumentation Trace Macrocell (ITM) - @{ - */ - -/** - \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). - */ -typedef struct -{ - __OM union - { - __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864U]; - __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15U]; - __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15U]; - __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[6U]; - __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; - -/* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ - -/* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ - -#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ - -#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ - -#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ -#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ - -#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ - -#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ - -#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ - -#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ - -#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ - -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - -/* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ - -#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ - -#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ - -/*@}*/ /* end of group CMSIS_ITM */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED0[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ - -#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ - -#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ - -#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ - -#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ - -#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ - -#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ - -#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ - -#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ - -#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ - -#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ - -#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ - -#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ - -/* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ - -/* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ - -/* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ - -/* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ - -/* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ - -/* DWT Comparator Mask Register Definitions */ -#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ -#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ -#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ - -#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ -#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ -#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ - -#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ -#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ - -#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ -#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ - -#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ -#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ - -#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ -#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ - uint32_t RESERVED3[759U]; - __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ - __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ - __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ - uint32_t RESERVED4[1U]; - __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ - __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ - __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39U]; - __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8U]; - __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ - -/* TPI Integration ETM Data Register Definitions (FIFO0) */ -#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ - -#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ -#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ - -#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ - -#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ -#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ - -#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ -#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ - -#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ -#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ - -#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ -#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ - -/* TPI ITATBCTR2 Register Definitions */ -#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */ -#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */ - -/* TPI Integration ITM Data Register Definitions (FIFO1) */ -#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ - -#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ -#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ - -#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ - -#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ -#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ - -#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ -#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ - -#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ -#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ - -#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ -#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ - -/* TPI ITATBCTR0 Register Definitions */ -#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */ -#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */ - -/* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ -#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ - -#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ -#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ - -#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ - __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ - __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ - __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ - __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ -} MPU_Type; - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ - -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ - -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ - -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ - -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ - -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ - -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ - -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ - -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ - -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Cortex-M3 Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ -#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ -#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ -#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ -#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ -#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ -#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ -#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ - -#if (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Debug Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -/** - \brief Set Priority Grouping - \details Sets the priority grouping field using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ - SCB->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping - \details Reads the priority grouping field from the NVIC Interrupt Controller. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) -{ - return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable External Interrupt - \details Enables a device-specific interrupt in the NVIC interrupt controller. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) -{ - NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Disable External Interrupt - \details Disables a device-specific interrupt in the NVIC interrupt controller. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) -{ - NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Get Pending Interrupt - \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt. - \param [in] IRQn Interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - */ -__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of an external interrupt. - \param [in] IRQn Interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of an external interrupt. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in NVIC and returns the active bit. - \param [in] IRQn Interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - */ -__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) -{ - return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of an interrupt. - \note The priority cannot be set for every core interrupt. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - */ -__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) < 0) - { - SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of an interrupt. - The interrupt number can be positive to specify an external (device specific) interrupt, - or negative to specify an internal (core) interrupt. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) < 0) - { - return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__STATIC_INLINE void NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the - function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - -/* ##################################### Debug In/Output function ########################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_core_DebugFunctions ITM Functions - \brief Functions that access the ITM debug interface. - @{ - */ - -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - - -/** - \brief ITM Send Character - \details Transmits a character via the ITM channel 0, and - \li Just returns when no debugger is connected that has booked the output. - \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. - \param [in] ch Character to transmit. - \returns Character to transmit. - */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ - ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0U].u32 == 0UL) - { - __NOP(); - } - ITM->PORT[0U].u8 = (uint8_t)ch; - } - return (ch); -} - - -/** - \brief ITM Receive Character - \details Inputs a character via the external variable \ref ITM_RxBuffer. - \return Received character. - \return -1 No character pending. - */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) -{ - int32_t ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) - { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} - - -/** - \brief ITM Check Character - \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. - \return 0 No character available. - \return 1 Character available. - */ -__STATIC_INLINE int32_t ITM_CheckChar (void) -{ - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) - { - return (0); /* no character available */ - } - else - { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM3_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_cm4.h b/stm32cubemx/Drivers/CMSIS/Include/core_cm4.h deleted file mode 100644 index dc840eb..0000000 --- a/stm32cubemx/Drivers/CMSIS/Include/core_cm4.h +++ /dev/null @@ -1,1937 +0,0 @@ -/**************************************************************************//** - * @file core_cm4.h - * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File - * @version V4.30 - * @date 20. October 2015 - ******************************************************************************/ -/* Copyright (c) 2009 - 2015 ARM LIMITED - - All rights reserved. - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - Neither the name of ARM nor the names of its contributors may be used - to endorse or promote products derived from this software without - specific prior written permission. - * - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - ---------------------------------------------------------------------------*/ - - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM4_H_GENERIC -#define __CORE_CM4_H_GENERIC - -#include <stdint.h> - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.<br> - Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> - Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.<br> - Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M4 - @{ - */ - -/* CMSIS CM4 definitions */ -#define __CM4_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */ -#define __CM4_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */ -#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16U) | \ - __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ - -#define __CORTEX_M (0x04U) /*!< Cortex-M Core */ - - -#if defined ( __CC_ARM ) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline - -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline - -#elif defined ( __GNUC__ ) - #define __ASM __asm /*!< asm keyword for GNU Compiler */ - #define __INLINE inline /*!< inline keyword for GNU Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __ICCARM__ ) - #define __ASM __asm /*!< asm keyword for IAR Compiler */ - #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ - #define __STATIC_INLINE static inline - -#elif defined ( __TMS470__ ) - #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __TASKING__ ) - #define __ASM __asm /*!< asm keyword for TASKING Compiler */ - #define __INLINE inline /*!< inline keyword for TASKING Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __CSMC__ ) - #define __packed - #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ - #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */ - #define __STATIC_INLINE static inline - -#else - #error Unknown compiler -#endif - -/** __FPU_USED indicates whether an FPU is used or not. - For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. -*/ -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #if (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #if (__FPU_PRESENT == 1) - #define __FPU_USED 1U - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #if (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #if (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __TMS470__ ) - #if defined __TI_VFP_SUPPORT__ - #if (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #if (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #if (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#endif - -#include "core_cmInstr.h" /* Core Instruction Access */ -#include "core_cmFunc.h" /* Core Function Access */ -#include "core_cmSimd.h" /* Compiler specific SIMD Intrinsics */ - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM4_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM4_H_DEPENDANT -#define __CORE_CM4_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM4_REV - #define __CM4_REV 0x0000U - #warning "__CM4_REV not defined in device header file; using default!" - #endif - - #ifndef __FPU_PRESENT - #define __FPU_PRESENT 0U - #warning "__FPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 4U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - <strong>IO Type Qualifiers</strong> are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M4 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - - Core FPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - -#define APSR_Q_Pos 27U /*!< APSR: Q Position */ -#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ - -#define APSR_GE_Pos 16U /*!< APSR: GE Position */ -#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ -#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ - -#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ -#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ -#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ - uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ -#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ - -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[24U]; - __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; - __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[24U]; - __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[24U]; - __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[56U]; - __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED5[644U]; - __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; - -/* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - uint32_t RESERVED0[5U]; - __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ -#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ -#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ - -#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ - -#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ - -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ - -#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ - -#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ - -#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ - -/* SCB Configurable Fault Status Register Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ - -#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ - -#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ - -/* SCB Hard Fault Status Register Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ - -#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ - -#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ - -/* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ - -#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ - -#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ - -#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ - -#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ -} SCnSCB_Type; - -/* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ - -/* Auxiliary Control Register Definitions */ -#define SCnSCB_ACTLR_DISOOFP_Pos 9U /*!< ACTLR: DISOOFP Position */ -#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */ - -#define SCnSCB_ACTLR_DISFPCA_Pos 8U /*!< ACTLR: DISFPCA Position */ -#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */ - -#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ -#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ - -#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1U /*!< ACTLR: DISDEFWBUF Position */ -#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */ - -#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ -#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) - \brief Type definitions for the Instrumentation Trace Macrocell (ITM) - @{ - */ - -/** - \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). - */ -typedef struct -{ - __OM union - { - __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864U]; - __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15U]; - __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15U]; - __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[6U]; - __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; - -/* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ - -/* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ - -#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ - -#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ - -#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ -#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ - -#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ - -#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ - -#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ - -#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ - -#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ - -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - -/* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ - -#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ - -#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ - -/*@}*/ /* end of group CMSIS_ITM */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED0[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ - -#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ - -#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ - -#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ - -#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ - -#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ - -#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ - -#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ - -#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ - -#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ - -#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ - -#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ - -#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ - -/* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ - -/* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ - -/* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ - -/* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ - -/* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ - -/* DWT Comparator Mask Register Definitions */ -#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ -#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ -#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ - -#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ -#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ -#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ - -#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ -#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ - -#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ -#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ - -#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ -#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ - -#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ -#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ - uint32_t RESERVED3[759U]; - __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ - __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ - __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ - uint32_t RESERVED4[1U]; - __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ - __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ - __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39U]; - __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8U]; - __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ - -/* TPI Integration ETM Data Register Definitions (FIFO0) */ -#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ - -#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ -#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ - -#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ - -#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ -#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ - -#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ -#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ - -#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ -#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ - -#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ -#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ - -/* TPI ITATBCTR2 Register Definitions */ -#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */ -#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */ - -/* TPI Integration ITM Data Register Definitions (FIFO1) */ -#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ - -#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ -#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ - -#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ - -#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ -#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ - -#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ -#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ - -#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ -#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ - -#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ -#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ - -/* TPI ITATBCTR0 Register Definitions */ -#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */ -#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */ - -/* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ -#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ - -#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ -#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ - -#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ - __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ - __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ - __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ - __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ -} MPU_Type; - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -#if (__FPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_FPU Floating Point Unit (FPU) - \brief Type definitions for the Floating Point Unit (FPU) - @{ - */ - -/** - \brief Structure type to access the Floating Point Unit (FPU). - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ - __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ - __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ - __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ -} FPU_Type; - -/* Floating-Point Context Control Register Definitions */ -#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ -#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ - -#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ -#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ - -#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ -#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ - -#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ -#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ - -#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ -#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ - -#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ -#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ - -#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ -#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ - -#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ -#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ - -#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ -#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ - -/* Floating-Point Context Address Register Definitions */ -#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ -#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ - -/* Floating-Point Default Status Control Register Definitions */ -#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ -#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ - -#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ -#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ - -#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ -#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ - -#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ -#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ - -/* Media and FP Feature Register 0 Definitions */ -#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ -#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ - -#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ -#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ - -#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ -#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ - -#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ -#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ - -#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ -#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ - -#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ -#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ - -#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ -#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ - -#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ -#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ - -/* Media and FP Feature Register 1 Definitions */ -#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ -#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ - -#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ -#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ - -#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ -#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ - -#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ -#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ - -/*@} end of group CMSIS_FPU */ -#endif - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ - -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ - -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ - -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ - -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ - -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ - -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ - -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ - -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ - -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Cortex-M4 Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ -#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ -#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ -#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ -#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ -#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ -#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ -#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ - -#if (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -#if (__FPU_PRESENT == 1U) - #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ - #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ -#endif - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Debug Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -/** - \brief Set Priority Grouping - \details Sets the priority grouping field using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ - SCB->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping - \details Reads the priority grouping field from the NVIC Interrupt Controller. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) -{ - return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable External Interrupt - \details Enables a device-specific interrupt in the NVIC interrupt controller. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) -{ - NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Disable External Interrupt - \details Disables a device-specific interrupt in the NVIC interrupt controller. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) -{ - NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Get Pending Interrupt - \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt. - \param [in] IRQn Interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - */ -__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of an external interrupt. - \param [in] IRQn Interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of an external interrupt. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in NVIC and returns the active bit. - \param [in] IRQn Interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - */ -__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) -{ - return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of an interrupt. - \note The priority cannot be set for every core interrupt. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - */ -__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) < 0) - { - SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of an interrupt. - The interrupt number can be positive to specify an external (device specific) interrupt, - or negative to specify an internal (core) interrupt. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) < 0) - { - return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__STATIC_INLINE void NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the - function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - -/* ##################################### Debug In/Output function ########################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_core_DebugFunctions ITM Functions - \brief Functions that access the ITM debug interface. - @{ - */ - -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - - -/** - \brief ITM Send Character - \details Transmits a character via the ITM channel 0, and - \li Just returns when no debugger is connected that has booked the output. - \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. - \param [in] ch Character to transmit. - \returns Character to transmit. - */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ - ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0U].u32 == 0UL) - { - __NOP(); - } - ITM->PORT[0U].u8 = (uint8_t)ch; - } - return (ch); -} - - -/** - \brief ITM Receive Character - \details Inputs a character via the external variable \ref ITM_RxBuffer. - \return Received character. - \return -1 No character pending. - */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) -{ - int32_t ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) - { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} - - -/** - \brief ITM Check Character - \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. - \return 0 No character available. - \return 1 Character available. - */ -__STATIC_INLINE int32_t ITM_CheckChar (void) -{ - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) - { - return (0); /* no character available */ - } - else - { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM4_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_cm7.h b/stm32cubemx/Drivers/CMSIS/Include/core_cm7.h deleted file mode 100644 index 3b7530a..0000000 --- a/stm32cubemx/Drivers/CMSIS/Include/core_cm7.h +++ /dev/null @@ -1,2512 +0,0 @@ -/**************************************************************************//** - * @file core_cm7.h - * @brief CMSIS Cortex-M7 Core Peripheral Access Layer Header File - * @version V4.30 - * @date 20. October 2015 - ******************************************************************************/ -/* Copyright (c) 2009 - 2015 ARM LIMITED - - All rights reserved. - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - Neither the name of ARM nor the names of its contributors may be used - to endorse or promote products derived from this software without - specific prior written permission. - * - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - ---------------------------------------------------------------------------*/ - - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CM7_H_GENERIC -#define __CORE_CM7_H_GENERIC - -#include <stdint.h> - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.<br> - Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> - Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.<br> - Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup Cortex_M7 - @{ - */ - -/* CMSIS CM7 definitions */ -#define __CM7_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */ -#define __CM7_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */ -#define __CM7_CMSIS_VERSION ((__CM7_CMSIS_VERSION_MAIN << 16U) | \ - __CM7_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ - -#define __CORTEX_M (0x07U) /*!< Cortex-M Core */ - - -#if defined ( __CC_ARM ) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline - -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline - -#elif defined ( __GNUC__ ) - #define __ASM __asm /*!< asm keyword for GNU Compiler */ - #define __INLINE inline /*!< inline keyword for GNU Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __ICCARM__ ) - #define __ASM __asm /*!< asm keyword for IAR Compiler */ - #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ - #define __STATIC_INLINE static inline - -#elif defined ( __TMS470__ ) - #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __TASKING__ ) - #define __ASM __asm /*!< asm keyword for TASKING Compiler */ - #define __INLINE inline /*!< inline keyword for TASKING Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __CSMC__ ) - #define __packed - #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ - #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */ - #define __STATIC_INLINE static inline - -#else - #error Unknown compiler -#endif - -/** __FPU_USED indicates whether an FPU is used or not. - For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions. -*/ -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #if (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #if (__FPU_PRESENT == 1) - #define __FPU_USED 1U - #else - #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #if (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #if (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __TMS470__ ) - #if defined __TI_VFP_SUPPORT__ - #if (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #if (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #if (__FPU_PRESENT == 1U) - #define __FPU_USED 1U - #else - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #define __FPU_USED 0U - #endif - #else - #define __FPU_USED 0U - #endif - -#endif - -#include "core_cmInstr.h" /* Core Instruction Access */ -#include "core_cmFunc.h" /* Core Function Access */ -#include "core_cmSimd.h" /* Compiler specific SIMD Intrinsics */ - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM7_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_CM7_H_DEPENDANT -#define __CORE_CM7_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __CM7_REV - #define __CM7_REV 0x0000U - #warning "__CM7_REV not defined in device header file; using default!" - #endif - - #ifndef __FPU_PRESENT - #define __FPU_PRESENT 0U - #warning "__FPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __ICACHE_PRESENT - #define __ICACHE_PRESENT 0U - #warning "__ICACHE_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __DCACHE_PRESENT - #define __DCACHE_PRESENT 0U - #warning "__DCACHE_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __DTCM_PRESENT - #define __DTCM_PRESENT 0U - #warning "__DTCM_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 3U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - <strong>IO Type Qualifiers</strong> are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group Cortex_M7 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - - Core FPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - -#define APSR_Q_Pos 27U /*!< APSR: Q Position */ -#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ - -#define APSR_GE_Pos 16U /*!< APSR: GE Position */ -#define APSR_GE_Msk (0xFUL << APSR_GE_Pos) /*!< APSR: GE Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */ - uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */ - uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ -#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ - -#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ -#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_GE_Pos 16U /*!< xPSR: GE Position */ -#define xPSR_GE_Msk (0xFUL << xPSR_GE_Pos) /*!< xPSR: GE Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */ - uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_FPCA_Pos 2U /*!< CONTROL: FPCA Position */ -#define CONTROL_FPCA_Msk (1UL << CONTROL_FPCA_Pos) /*!< CONTROL: FPCA Mask */ - -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[24U]; - __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; - __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[24U]; - __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[24U]; - __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[56U]; - __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED5[644U]; - __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; - -/* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IOM uint8_t SHPR[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __IM uint32_t ID_PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __IM uint32_t ID_DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ID_AFR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __IM uint32_t ID_MFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __IM uint32_t ID_ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - uint32_t RESERVED0[1U]; - __IM uint32_t CLIDR; /*!< Offset: 0x078 (R/ ) Cache Level ID register */ - __IM uint32_t CTR; /*!< Offset: 0x07C (R/ ) Cache Type register */ - __IM uint32_t CCSIDR; /*!< Offset: 0x080 (R/ ) Cache Size ID Register */ - __IOM uint32_t CSSELR; /*!< Offset: 0x084 (R/W) Cache Size Selection Register */ - __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ - uint32_t RESERVED3[93U]; - __OM uint32_t STIR; /*!< Offset: 0x200 ( /W) Software Triggered Interrupt Register */ - uint32_t RESERVED4[15U]; - __IM uint32_t MVFR0; /*!< Offset: 0x240 (R/ ) Media and VFP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x244 (R/ ) Media and VFP Feature Register 1 */ - __IM uint32_t MVFR2; /*!< Offset: 0x248 (R/ ) Media and VFP Feature Register 1 */ - uint32_t RESERVED5[1U]; - __OM uint32_t ICIALLU; /*!< Offset: 0x250 ( /W) I-Cache Invalidate All to PoU */ - uint32_t RESERVED6[1U]; - __OM uint32_t ICIMVAU; /*!< Offset: 0x258 ( /W) I-Cache Invalidate by MVA to PoU */ - __OM uint32_t DCIMVAC; /*!< Offset: 0x25C ( /W) D-Cache Invalidate by MVA to PoC */ - __OM uint32_t DCISW; /*!< Offset: 0x260 ( /W) D-Cache Invalidate by Set-way */ - __OM uint32_t DCCMVAU; /*!< Offset: 0x264 ( /W) D-Cache Clean by MVA to PoU */ - __OM uint32_t DCCMVAC; /*!< Offset: 0x268 ( /W) D-Cache Clean by MVA to PoC */ - __OM uint32_t DCCSW; /*!< Offset: 0x26C ( /W) D-Cache Clean by Set-way */ - __OM uint32_t DCCIMVAC; /*!< Offset: 0x270 ( /W) D-Cache Clean and Invalidate by MVA to PoC */ - __OM uint32_t DCCISW; /*!< Offset: 0x274 ( /W) D-Cache Clean and Invalidate by Set-way */ - uint32_t RESERVED7[6U]; - __IOM uint32_t ITCMCR; /*!< Offset: 0x290 (R/W) Instruction Tightly-Coupled Memory Control Register */ - __IOM uint32_t DTCMCR; /*!< Offset: 0x294 (R/W) Data Tightly-Coupled Memory Control Registers */ - __IOM uint32_t AHBPCR; /*!< Offset: 0x298 (R/W) AHBP Control Register */ - __IOM uint32_t CACR; /*!< Offset: 0x29C (R/W) L1 Cache Control Register */ - __IOM uint32_t AHBSCR; /*!< Offset: 0x2A0 (R/W) AHB Slave Control Register */ - uint32_t RESERVED8[1U]; - __IOM uint32_t ABFSR; /*!< Offset: 0x2A8 (R/W) Auxiliary Bus Fault Status Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ -#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_BP_Pos 18U /*!< SCB CCR: Branch prediction enable bit Position */ -#define SCB_CCR_BP_Msk (1UL << SCB_CCR_BP_Pos) /*!< SCB CCR: Branch prediction enable bit Mask */ - -#define SCB_CCR_IC_Pos 17U /*!< SCB CCR: Instruction cache enable bit Position */ -#define SCB_CCR_IC_Msk (1UL << SCB_CCR_IC_Pos) /*!< SCB CCR: Instruction cache enable bit Mask */ - -#define SCB_CCR_DC_Pos 16U /*!< SCB CCR: Cache enable bit Position */ -#define SCB_CCR_DC_Msk (1UL << SCB_CCR_DC_Pos) /*!< SCB CCR: Cache enable bit Mask */ - -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ -#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ - -#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ - -#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ - -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ - -#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ - -#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ - -#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ - -/* SCB Configurable Fault Status Register Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ - -#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ - -#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ - -/* SCB Hard Fault Status Register Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ - -#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ - -#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ - -/* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ - -#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ - -#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ - -#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ - -#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ - -/* SCB Cache Level ID Register Definitions */ -#define SCB_CLIDR_LOUU_Pos 27U /*!< SCB CLIDR: LoUU Position */ -#define SCB_CLIDR_LOUU_Msk (7UL << SCB_CLIDR_LOUU_Pos) /*!< SCB CLIDR: LoUU Mask */ - -#define SCB_CLIDR_LOC_Pos 24U /*!< SCB CLIDR: LoC Position */ -#define SCB_CLIDR_LOC_Msk (7UL << SCB_CLIDR_LOC_Pos) /*!< SCB CLIDR: LoC Mask */ - -/* SCB Cache Type Register Definitions */ -#define SCB_CTR_FORMAT_Pos 29U /*!< SCB CTR: Format Position */ -#define SCB_CTR_FORMAT_Msk (7UL << SCB_CTR_FORMAT_Pos) /*!< SCB CTR: Format Mask */ - -#define SCB_CTR_CWG_Pos 24U /*!< SCB CTR: CWG Position */ -#define SCB_CTR_CWG_Msk (0xFUL << SCB_CTR_CWG_Pos) /*!< SCB CTR: CWG Mask */ - -#define SCB_CTR_ERG_Pos 20U /*!< SCB CTR: ERG Position */ -#define SCB_CTR_ERG_Msk (0xFUL << SCB_CTR_ERG_Pos) /*!< SCB CTR: ERG Mask */ - -#define SCB_CTR_DMINLINE_Pos 16U /*!< SCB CTR: DminLine Position */ -#define SCB_CTR_DMINLINE_Msk (0xFUL << SCB_CTR_DMINLINE_Pos) /*!< SCB CTR: DminLine Mask */ - -#define SCB_CTR_IMINLINE_Pos 0U /*!< SCB CTR: ImInLine Position */ -#define SCB_CTR_IMINLINE_Msk (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/) /*!< SCB CTR: ImInLine Mask */ - -/* SCB Cache Size ID Register Definitions */ -#define SCB_CCSIDR_WT_Pos 31U /*!< SCB CCSIDR: WT Position */ -#define SCB_CCSIDR_WT_Msk (1UL << SCB_CCSIDR_WT_Pos) /*!< SCB CCSIDR: WT Mask */ - -#define SCB_CCSIDR_WB_Pos 30U /*!< SCB CCSIDR: WB Position */ -#define SCB_CCSIDR_WB_Msk (1UL << SCB_CCSIDR_WB_Pos) /*!< SCB CCSIDR: WB Mask */ - -#define SCB_CCSIDR_RA_Pos 29U /*!< SCB CCSIDR: RA Position */ -#define SCB_CCSIDR_RA_Msk (1UL << SCB_CCSIDR_RA_Pos) /*!< SCB CCSIDR: RA Mask */ - -#define SCB_CCSIDR_WA_Pos 28U /*!< SCB CCSIDR: WA Position */ -#define SCB_CCSIDR_WA_Msk (1UL << SCB_CCSIDR_WA_Pos) /*!< SCB CCSIDR: WA Mask */ - -#define SCB_CCSIDR_NUMSETS_Pos 13U /*!< SCB CCSIDR: NumSets Position */ -#define SCB_CCSIDR_NUMSETS_Msk (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos) /*!< SCB CCSIDR: NumSets Mask */ - -#define SCB_CCSIDR_ASSOCIATIVITY_Pos 3U /*!< SCB CCSIDR: Associativity Position */ -#define SCB_CCSIDR_ASSOCIATIVITY_Msk (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos) /*!< SCB CCSIDR: Associativity Mask */ - -#define SCB_CCSIDR_LINESIZE_Pos 0U /*!< SCB CCSIDR: LineSize Position */ -#define SCB_CCSIDR_LINESIZE_Msk (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/) /*!< SCB CCSIDR: LineSize Mask */ - -/* SCB Cache Size Selection Register Definitions */ -#define SCB_CSSELR_LEVEL_Pos 1U /*!< SCB CSSELR: Level Position */ -#define SCB_CSSELR_LEVEL_Msk (7UL << SCB_CSSELR_LEVEL_Pos) /*!< SCB CSSELR: Level Mask */ - -#define SCB_CSSELR_IND_Pos 0U /*!< SCB CSSELR: InD Position */ -#define SCB_CSSELR_IND_Msk (1UL /*<< SCB_CSSELR_IND_Pos*/) /*!< SCB CSSELR: InD Mask */ - -/* SCB Software Triggered Interrupt Register Definitions */ -#define SCB_STIR_INTID_Pos 0U /*!< SCB STIR: INTID Position */ -#define SCB_STIR_INTID_Msk (0x1FFUL /*<< SCB_STIR_INTID_Pos*/) /*!< SCB STIR: INTID Mask */ - -/* SCB D-Cache Invalidate by Set-way Register Definitions */ -#define SCB_DCISW_WAY_Pos 30U /*!< SCB DCISW: Way Position */ -#define SCB_DCISW_WAY_Msk (3UL << SCB_DCISW_WAY_Pos) /*!< SCB DCISW: Way Mask */ - -#define SCB_DCISW_SET_Pos 5U /*!< SCB DCISW: Set Position */ -#define SCB_DCISW_SET_Msk (0x1FFUL << SCB_DCISW_SET_Pos) /*!< SCB DCISW: Set Mask */ - -/* SCB D-Cache Clean by Set-way Register Definitions */ -#define SCB_DCCSW_WAY_Pos 30U /*!< SCB DCCSW: Way Position */ -#define SCB_DCCSW_WAY_Msk (3UL << SCB_DCCSW_WAY_Pos) /*!< SCB DCCSW: Way Mask */ - -#define SCB_DCCSW_SET_Pos 5U /*!< SCB DCCSW: Set Position */ -#define SCB_DCCSW_SET_Msk (0x1FFUL << SCB_DCCSW_SET_Pos) /*!< SCB DCCSW: Set Mask */ - -/* SCB D-Cache Clean and Invalidate by Set-way Register Definitions */ -#define SCB_DCCISW_WAY_Pos 30U /*!< SCB DCCISW: Way Position */ -#define SCB_DCCISW_WAY_Msk (3UL << SCB_DCCISW_WAY_Pos) /*!< SCB DCCISW: Way Mask */ - -#define SCB_DCCISW_SET_Pos 5U /*!< SCB DCCISW: Set Position */ -#define SCB_DCCISW_SET_Msk (0x1FFUL << SCB_DCCISW_SET_Pos) /*!< SCB DCCISW: Set Mask */ - -/* Instruction Tightly-Coupled Memory Control Register Definitions */ -#define SCB_ITCMCR_SZ_Pos 3U /*!< SCB ITCMCR: SZ Position */ -#define SCB_ITCMCR_SZ_Msk (0xFUL << SCB_ITCMCR_SZ_Pos) /*!< SCB ITCMCR: SZ Mask */ - -#define SCB_ITCMCR_RETEN_Pos 2U /*!< SCB ITCMCR: RETEN Position */ -#define SCB_ITCMCR_RETEN_Msk (1UL << SCB_ITCMCR_RETEN_Pos) /*!< SCB ITCMCR: RETEN Mask */ - -#define SCB_ITCMCR_RMW_Pos 1U /*!< SCB ITCMCR: RMW Position */ -#define SCB_ITCMCR_RMW_Msk (1UL << SCB_ITCMCR_RMW_Pos) /*!< SCB ITCMCR: RMW Mask */ - -#define SCB_ITCMCR_EN_Pos 0U /*!< SCB ITCMCR: EN Position */ -#define SCB_ITCMCR_EN_Msk (1UL /*<< SCB_ITCMCR_EN_Pos*/) /*!< SCB ITCMCR: EN Mask */ - -/* Data Tightly-Coupled Memory Control Register Definitions */ -#define SCB_DTCMCR_SZ_Pos 3U /*!< SCB DTCMCR: SZ Position */ -#define SCB_DTCMCR_SZ_Msk (0xFUL << SCB_DTCMCR_SZ_Pos) /*!< SCB DTCMCR: SZ Mask */ - -#define SCB_DTCMCR_RETEN_Pos 2U /*!< SCB DTCMCR: RETEN Position */ -#define SCB_DTCMCR_RETEN_Msk (1UL << SCB_DTCMCR_RETEN_Pos) /*!< SCB DTCMCR: RETEN Mask */ - -#define SCB_DTCMCR_RMW_Pos 1U /*!< SCB DTCMCR: RMW Position */ -#define SCB_DTCMCR_RMW_Msk (1UL << SCB_DTCMCR_RMW_Pos) /*!< SCB DTCMCR: RMW Mask */ - -#define SCB_DTCMCR_EN_Pos 0U /*!< SCB DTCMCR: EN Position */ -#define SCB_DTCMCR_EN_Msk (1UL /*<< SCB_DTCMCR_EN_Pos*/) /*!< SCB DTCMCR: EN Mask */ - -/* AHBP Control Register Definitions */ -#define SCB_AHBPCR_SZ_Pos 1U /*!< SCB AHBPCR: SZ Position */ -#define SCB_AHBPCR_SZ_Msk (7UL << SCB_AHBPCR_SZ_Pos) /*!< SCB AHBPCR: SZ Mask */ - -#define SCB_AHBPCR_EN_Pos 0U /*!< SCB AHBPCR: EN Position */ -#define SCB_AHBPCR_EN_Msk (1UL /*<< SCB_AHBPCR_EN_Pos*/) /*!< SCB AHBPCR: EN Mask */ - -/* L1 Cache Control Register Definitions */ -#define SCB_CACR_FORCEWT_Pos 2U /*!< SCB CACR: FORCEWT Position */ -#define SCB_CACR_FORCEWT_Msk (1UL << SCB_CACR_FORCEWT_Pos) /*!< SCB CACR: FORCEWT Mask */ - -#define SCB_CACR_ECCEN_Pos 1U /*!< SCB CACR: ECCEN Position */ -#define SCB_CACR_ECCEN_Msk (1UL << SCB_CACR_ECCEN_Pos) /*!< SCB CACR: ECCEN Mask */ - -#define SCB_CACR_SIWT_Pos 0U /*!< SCB CACR: SIWT Position */ -#define SCB_CACR_SIWT_Msk (1UL /*<< SCB_CACR_SIWT_Pos*/) /*!< SCB CACR: SIWT Mask */ - -/* AHBS Control Register Definitions */ -#define SCB_AHBSCR_INITCOUNT_Pos 11U /*!< SCB AHBSCR: INITCOUNT Position */ -#define SCB_AHBSCR_INITCOUNT_Msk (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos) /*!< SCB AHBSCR: INITCOUNT Mask */ - -#define SCB_AHBSCR_TPRI_Pos 2U /*!< SCB AHBSCR: TPRI Position */ -#define SCB_AHBSCR_TPRI_Msk (0x1FFUL << SCB_AHBPCR_TPRI_Pos) /*!< SCB AHBSCR: TPRI Mask */ - -#define SCB_AHBSCR_CTL_Pos 0U /*!< SCB AHBSCR: CTL Position*/ -#define SCB_AHBSCR_CTL_Msk (3UL /*<< SCB_AHBPCR_CTL_Pos*/) /*!< SCB AHBSCR: CTL Mask */ - -/* Auxiliary Bus Fault Status Register Definitions */ -#define SCB_ABFSR_AXIMTYPE_Pos 8U /*!< SCB ABFSR: AXIMTYPE Position*/ -#define SCB_ABFSR_AXIMTYPE_Msk (3UL << SCB_ABFSR_AXIMTYPE_Pos) /*!< SCB ABFSR: AXIMTYPE Mask */ - -#define SCB_ABFSR_EPPB_Pos 4U /*!< SCB ABFSR: EPPB Position*/ -#define SCB_ABFSR_EPPB_Msk (1UL << SCB_ABFSR_EPPB_Pos) /*!< SCB ABFSR: EPPB Mask */ - -#define SCB_ABFSR_AXIM_Pos 3U /*!< SCB ABFSR: AXIM Position*/ -#define SCB_ABFSR_AXIM_Msk (1UL << SCB_ABFSR_AXIM_Pos) /*!< SCB ABFSR: AXIM Mask */ - -#define SCB_ABFSR_AHBP_Pos 2U /*!< SCB ABFSR: AHBP Position*/ -#define SCB_ABFSR_AHBP_Msk (1UL << SCB_ABFSR_AHBP_Pos) /*!< SCB ABFSR: AHBP Mask */ - -#define SCB_ABFSR_DTCM_Pos 1U /*!< SCB ABFSR: DTCM Position*/ -#define SCB_ABFSR_DTCM_Msk (1UL << SCB_ABFSR_DTCM_Pos) /*!< SCB ABFSR: DTCM Mask */ - -#define SCB_ABFSR_ITCM_Pos 0U /*!< SCB ABFSR: ITCM Position*/ -#define SCB_ABFSR_ITCM_Msk (1UL /*<< SCB_ABFSR_ITCM_Pos*/) /*!< SCB ABFSR: ITCM Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ -} SCnSCB_Type; - -/* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ - -/* Auxiliary Control Register Definitions */ -#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos 12U /*!< ACTLR: DISITMATBFLUSH Position */ -#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos) /*!< ACTLR: DISITMATBFLUSH Mask */ - -#define SCnSCB_ACTLR_DISRAMODE_Pos 11U /*!< ACTLR: DISRAMODE Position */ -#define SCnSCB_ACTLR_DISRAMODE_Msk (1UL << SCnSCB_ACTLR_DISRAMODE_Pos) /*!< ACTLR: DISRAMODE Mask */ - -#define SCnSCB_ACTLR_FPEXCODIS_Pos 10U /*!< ACTLR: FPEXCODIS Position */ -#define SCnSCB_ACTLR_FPEXCODIS_Msk (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos) /*!< ACTLR: FPEXCODIS Mask */ - -#define SCnSCB_ACTLR_DISFOLD_Pos 2U /*!< ACTLR: DISFOLD Position */ -#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */ - -#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ -#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) - \brief Type definitions for the Instrumentation Trace Macrocell (ITM) - @{ - */ - -/** - \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). - */ -typedef struct -{ - __OM union - { - __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864U]; - __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15U]; - __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15U]; - __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[6U]; - __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; - -/* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ - -/* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ - -#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ - -#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ - -#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ -#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ - -#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ - -#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ - -#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ - -#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ - -#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ - -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - -/* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ - -#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ - -#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ - -/*@}*/ /* end of group CMSIS_ITM */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED0[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ - uint32_t RESERVED3[981U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( W) Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R ) Lock Status Register */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ - -#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ - -#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ - -#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ - -#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ - -#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ - -#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ - -#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ - -#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ - -#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ - -#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ - -#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ - -#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ - -/* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ - -/* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ - -/* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ - -/* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ - -/* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ - -/* DWT Comparator Mask Register Definitions */ -#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ -#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ -#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ - -#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ -#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ -#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ - -#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ -#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ - -#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ -#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ - -#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ -#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ - -#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ -#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ - uint32_t RESERVED3[759U]; - __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ - __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ - __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ - uint32_t RESERVED4[1U]; - __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ - __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ - __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39U]; - __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8U]; - __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ - -/* TPI Integration ETM Data Register Definitions (FIFO0) */ -#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ - -#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ -#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ - -#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ - -#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ -#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ - -#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ -#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ - -#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ -#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ - -#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ -#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ - -/* TPI ITATBCTR2 Register Definitions */ -#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */ -#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */ - -/* TPI Integration ITM Data Register Definitions (FIFO1) */ -#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ - -#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ -#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ - -#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ - -#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ -#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ - -#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ -#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ - -#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ -#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ - -#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ -#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ - -/* TPI ITATBCTR0 Register Definitions */ -#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */ -#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */ - -/* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ -#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ - -#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ -#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ - -#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ - __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ - __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ - __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ - __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ -} MPU_Type; - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -#if (__FPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_FPU Floating Point Unit (FPU) - \brief Type definitions for the Floating Point Unit (FPU) - @{ - */ - -/** - \brief Structure type to access the Floating Point Unit (FPU). - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IOM uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */ - __IOM uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */ - __IOM uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */ - __IM uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */ - __IM uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */ - __IM uint32_t MVFR2; /*!< Offset: 0x018 (R/ ) Media and FP Feature Register 2 */ -} FPU_Type; - -/* Floating-Point Context Control Register Definitions */ -#define FPU_FPCCR_ASPEN_Pos 31U /*!< FPCCR: ASPEN bit Position */ -#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */ - -#define FPU_FPCCR_LSPEN_Pos 30U /*!< FPCCR: LSPEN Position */ -#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */ - -#define FPU_FPCCR_MONRDY_Pos 8U /*!< FPCCR: MONRDY Position */ -#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */ - -#define FPU_FPCCR_BFRDY_Pos 6U /*!< FPCCR: BFRDY Position */ -#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */ - -#define FPU_FPCCR_MMRDY_Pos 5U /*!< FPCCR: MMRDY Position */ -#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */ - -#define FPU_FPCCR_HFRDY_Pos 4U /*!< FPCCR: HFRDY Position */ -#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */ - -#define FPU_FPCCR_THREAD_Pos 3U /*!< FPCCR: processor mode bit Position */ -#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */ - -#define FPU_FPCCR_USER_Pos 1U /*!< FPCCR: privilege level bit Position */ -#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */ - -#define FPU_FPCCR_LSPACT_Pos 0U /*!< FPCCR: Lazy state preservation active bit Position */ -#define FPU_FPCCR_LSPACT_Msk (1UL /*<< FPU_FPCCR_LSPACT_Pos*/) /*!< FPCCR: Lazy state preservation active bit Mask */ - -/* Floating-Point Context Address Register Definitions */ -#define FPU_FPCAR_ADDRESS_Pos 3U /*!< FPCAR: ADDRESS bit Position */ -#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */ - -/* Floating-Point Default Status Control Register Definitions */ -#define FPU_FPDSCR_AHP_Pos 26U /*!< FPDSCR: AHP bit Position */ -#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */ - -#define FPU_FPDSCR_DN_Pos 25U /*!< FPDSCR: DN bit Position */ -#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */ - -#define FPU_FPDSCR_FZ_Pos 24U /*!< FPDSCR: FZ bit Position */ -#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */ - -#define FPU_FPDSCR_RMode_Pos 22U /*!< FPDSCR: RMode bit Position */ -#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */ - -/* Media and FP Feature Register 0 Definitions */ -#define FPU_MVFR0_FP_rounding_modes_Pos 28U /*!< MVFR0: FP rounding modes bits Position */ -#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */ - -#define FPU_MVFR0_Short_vectors_Pos 24U /*!< MVFR0: Short vectors bits Position */ -#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */ - -#define FPU_MVFR0_Square_root_Pos 20U /*!< MVFR0: Square root bits Position */ -#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */ - -#define FPU_MVFR0_Divide_Pos 16U /*!< MVFR0: Divide bits Position */ -#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */ - -#define FPU_MVFR0_FP_excep_trapping_Pos 12U /*!< MVFR0: FP exception trapping bits Position */ -#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */ - -#define FPU_MVFR0_Double_precision_Pos 8U /*!< MVFR0: Double-precision bits Position */ -#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */ - -#define FPU_MVFR0_Single_precision_Pos 4U /*!< MVFR0: Single-precision bits Position */ -#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */ - -#define FPU_MVFR0_A_SIMD_registers_Pos 0U /*!< MVFR0: A_SIMD registers bits Position */ -#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/) /*!< MVFR0: A_SIMD registers bits Mask */ - -/* Media and FP Feature Register 1 Definitions */ -#define FPU_MVFR1_FP_fused_MAC_Pos 28U /*!< MVFR1: FP fused MAC bits Position */ -#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */ - -#define FPU_MVFR1_FP_HPFP_Pos 24U /*!< MVFR1: FP HPFP bits Position */ -#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */ - -#define FPU_MVFR1_D_NaN_mode_Pos 4U /*!< MVFR1: D_NaN mode bits Position */ -#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */ - -#define FPU_MVFR1_FtZ_mode_Pos 0U /*!< MVFR1: FtZ mode bits Position */ -#define FPU_MVFR1_FtZ_mode_Msk (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/) /*!< MVFR1: FtZ mode bits Mask */ - -/* Media and FP Feature Register 2 Definitions */ - -/*@} end of group CMSIS_FPU */ -#endif - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ - -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ - -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ - -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ - -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ - -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ - -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ - -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ - -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ - -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Cortex-M4 Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ -#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ -#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ -#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ -#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ -#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ -#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ -#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ - -#if (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -#if (__FPU_PRESENT == 1U) - #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */ - #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */ -#endif - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Debug Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -/** - \brief Set Priority Grouping - \details Sets the priority grouping field using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ - SCB->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping - \details Reads the priority grouping field from the NVIC Interrupt Controller. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) -{ - return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable External Interrupt - \details Enables a device-specific interrupt in the NVIC interrupt controller. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) -{ - NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Disable External Interrupt - \details Disables a device-specific interrupt in the NVIC interrupt controller. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) -{ - NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Get Pending Interrupt - \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt. - \param [in] IRQn Interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - */ -__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of an external interrupt. - \param [in] IRQn Interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of an external interrupt. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in NVIC and returns the active bit. - \param [in] IRQn Interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - */ -__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) -{ - return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of an interrupt. - \note The priority cannot be set for every core interrupt. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - */ -__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) < 0) - { - SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of an interrupt. - The interrupt number can be positive to specify an external (device specific) interrupt, - or negative to specify an internal (core) interrupt. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) < 0) - { - return(((uint32_t)SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__STATIC_INLINE void NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - - -/* ########################## FPU functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_FpuFunctions FPU Functions - \brief Function that provides FPU type. - @{ - */ - -/** - \brief get FPU type - \details returns the FPU type - \returns - - \b 0: No FPU - - \b 1: Single precision FPU - - \b 2: Double + Single precision FPU - */ -__STATIC_INLINE uint32_t SCB_GetFPUType(void) -{ - uint32_t mvfr0; - - mvfr0 = SCB->MVFR0; - if ((mvfr0 & 0x00000FF0UL) == 0x220UL) - { - return 2UL; /* Double + Single precision FPU */ - } - else if ((mvfr0 & 0x00000FF0UL) == 0x020UL) - { - return 1UL; /* Single precision FPU */ - } - else - { - return 0UL; /* No FPU */ - } -} - - -/*@} end of CMSIS_Core_FpuFunctions */ - - - -/* ########################## Cache functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_CacheFunctions Cache Functions - \brief Functions that configure Instruction and Data cache. - @{ - */ - -/* Cache Size ID Register Macros */ -#define CCSIDR_WAYS(x) (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos) -#define CCSIDR_SETS(x) (((x) & SCB_CCSIDR_NUMSETS_Msk ) >> SCB_CCSIDR_NUMSETS_Pos ) - - -/** - \brief Enable I-Cache - \details Turns on I-Cache - */ -__STATIC_INLINE void SCB_EnableICache (void) -{ - #if (__ICACHE_PRESENT == 1U) - __DSB(); - __ISB(); - SCB->ICIALLU = 0UL; /* invalidate I-Cache */ - SCB->CCR |= (uint32_t)SCB_CCR_IC_Msk; /* enable I-Cache */ - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Disable I-Cache - \details Turns off I-Cache - */ -__STATIC_INLINE void SCB_DisableICache (void) -{ - #if (__ICACHE_PRESENT == 1U) - __DSB(); - __ISB(); - SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk; /* disable I-Cache */ - SCB->ICIALLU = 0UL; /* invalidate I-Cache */ - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Invalidate I-Cache - \details Invalidates I-Cache - */ -__STATIC_INLINE void SCB_InvalidateICache (void) -{ - #if (__ICACHE_PRESENT == 1U) - __DSB(); - __ISB(); - SCB->ICIALLU = 0UL; - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Enable D-Cache - \details Turns on D-Cache - */ -__STATIC_INLINE void SCB_EnableDCache (void) -{ - #if (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* invalidate D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | - ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways--); - } while(sets--); - __DSB(); - - SCB->CCR |= (uint32_t)SCB_CCR_DC_Msk; /* enable D-Cache */ - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Disable D-Cache - \details Turns off D-Cache - */ -__STATIC_INLINE void SCB_DisableDCache (void) -{ - #if (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk; /* disable D-Cache */ - - /* clean & invalidate D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | - ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways--); - } while(sets--); - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Invalidate D-Cache - \details Invalidates D-Cache - */ -__STATIC_INLINE void SCB_InvalidateDCache (void) -{ - #if (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* invalidate D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCISW = (((sets << SCB_DCISW_SET_Pos) & SCB_DCISW_SET_Msk) | - ((ways << SCB_DCISW_WAY_Pos) & SCB_DCISW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways--); - } while(sets--); - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Clean D-Cache - \details Cleans D-Cache - */ -__STATIC_INLINE void SCB_CleanDCache (void) -{ - #if (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* clean D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCCSW = (((sets << SCB_DCCSW_SET_Pos) & SCB_DCCSW_SET_Msk) | - ((ways << SCB_DCCSW_WAY_Pos) & SCB_DCCSW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways--); - } while(sets--); - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief Clean & Invalidate D-Cache - \details Cleans and Invalidates D-Cache - */ -__STATIC_INLINE void SCB_CleanInvalidateDCache (void) -{ - #if (__DCACHE_PRESENT == 1U) - uint32_t ccsidr; - uint32_t sets; - uint32_t ways; - - SCB->CSSELR = (0U << 1U) | 0U; /* Level 1 data cache */ - __DSB(); - - ccsidr = SCB->CCSIDR; - - /* clean & invalidate D-Cache */ - sets = (uint32_t)(CCSIDR_SETS(ccsidr)); - do { - ways = (uint32_t)(CCSIDR_WAYS(ccsidr)); - do { - SCB->DCCISW = (((sets << SCB_DCCISW_SET_Pos) & SCB_DCCISW_SET_Msk) | - ((ways << SCB_DCCISW_WAY_Pos) & SCB_DCCISW_WAY_Msk) ); - #if defined ( __CC_ARM ) - __schedule_barrier(); - #endif - } while (ways--); - } while(sets--); - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief D-Cache Invalidate by address - \details Invalidates D-Cache for the given address - \param[in] addr address (aligned to 32-byte boundary) - \param[in] dsize size of memory block (in number of bytes) -*/ -__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) -{ - #if (__DCACHE_PRESENT == 1U) - int32_t op_size = dsize; - uint32_t op_addr = (uint32_t)addr; - int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ - - __DSB(); - - while (op_size > 0) { - SCB->DCIMVAC = op_addr; - op_addr += linesize; - op_size -= linesize; - } - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief D-Cache Clean by address - \details Cleans D-Cache for the given address - \param[in] addr address (aligned to 32-byte boundary) - \param[in] dsize size of memory block (in number of bytes) -*/ -__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize) -{ - #if (__DCACHE_PRESENT == 1) - int32_t op_size = dsize; - uint32_t op_addr = (uint32_t) addr; - int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ - - __DSB(); - - while (op_size > 0) { - SCB->DCCMVAC = op_addr; - op_addr += linesize; - op_size -= linesize; - } - - __DSB(); - __ISB(); - #endif -} - - -/** - \brief D-Cache Clean and Invalidate by address - \details Cleans and invalidates D_Cache for the given address - \param[in] addr address (aligned to 32-byte boundary) - \param[in] dsize size of memory block (in number of bytes) -*/ -__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize) -{ - #if (__DCACHE_PRESENT == 1U) - int32_t op_size = dsize; - uint32_t op_addr = (uint32_t) addr; - int32_t linesize = 32U; /* in Cortex-M7 size of cache line is fixed to 8 words (32 bytes) */ - - __DSB(); - - while (op_size > 0) { - SCB->DCCIMVAC = op_addr; - op_addr += linesize; - op_size -= linesize; - } - - __DSB(); - __ISB(); - #endif -} - - -/*@} end of CMSIS_Core_CacheFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the - function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - -/* ##################################### Debug In/Output function ########################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_core_DebugFunctions ITM Functions - \brief Functions that access the ITM debug interface. - @{ - */ - -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - - -/** - \brief ITM Send Character - \details Transmits a character via the ITM channel 0, and - \li Just returns when no debugger is connected that has booked the output. - \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. - \param [in] ch Character to transmit. - \returns Character to transmit. - */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ - ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0U].u32 == 0UL) - { - __NOP(); - } - ITM->PORT[0U].u8 = (uint8_t)ch; - } - return (ch); -} - - -/** - \brief ITM Receive Character - \details Inputs a character via the external variable \ref ITM_RxBuffer. - \return Received character. - \return -1 No character pending. - */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) -{ - int32_t ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) - { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} - - -/** - \brief ITM Check Character - \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. - \return 0 No character available. - \return 1 Character available. - */ -__STATIC_INLINE int32_t ITM_CheckChar (void) -{ - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) - { - return (0); /* no character available */ - } - else - { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CM7_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_cmFunc.h b/stm32cubemx/Drivers/CMSIS/Include/core_cmFunc.h deleted file mode 100644 index 652a48a..0000000 --- a/stm32cubemx/Drivers/CMSIS/Include/core_cmFunc.h +++ /dev/null @@ -1,87 +0,0 @@ -/**************************************************************************//** - * @file core_cmFunc.h - * @brief CMSIS Cortex-M Core Function Access Header File - * @version V4.30 - * @date 20. October 2015 - ******************************************************************************/ -/* Copyright (c) 2009 - 2015 ARM LIMITED - - All rights reserved. - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - Neither the name of ARM nor the names of its contributors may be used - to endorse or promote products derived from this software without - specific prior written permission. - * - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - ---------------------------------------------------------------------------*/ - - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CMFUNC_H -#define __CORE_CMFUNC_H - - -/* ########################### Core Function Access ########################### */ -/** \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions - @{ -*/ - -/*------------------ RealView Compiler -----------------*/ -#if defined ( __CC_ARM ) - #include "cmsis_armcc.h" - -/*------------------ ARM Compiler V6 -------------------*/ -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #include "cmsis_armcc_V6.h" - -/*------------------ GNU Compiler ----------------------*/ -#elif defined ( __GNUC__ ) - #include "cmsis_gcc.h" - -/*------------------ ICC Compiler ----------------------*/ -#elif defined ( __ICCARM__ ) - #include <cmsis_iar.h> - -/*------------------ TI CCS Compiler -------------------*/ -#elif defined ( __TMS470__ ) - #include <cmsis_ccs.h> - -/*------------------ TASKING Compiler ------------------*/ -#elif defined ( __TASKING__ ) - /* - * The CMSIS functions have been implemented as intrinsics in the compiler. - * Please use "carm -?i" to get an up to date list of all intrinsics, - * Including the CMSIS ones. - */ - -/*------------------ COSMIC Compiler -------------------*/ -#elif defined ( __CSMC__ ) - #include <cmsis_csm.h> - -#endif - -/*@} end of CMSIS_Core_RegAccFunctions */ - -#endif /* __CORE_CMFUNC_H */ diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_cmInstr.h b/stm32cubemx/Drivers/CMSIS/Include/core_cmInstr.h deleted file mode 100644 index f474b0e..0000000 --- a/stm32cubemx/Drivers/CMSIS/Include/core_cmInstr.h +++ /dev/null @@ -1,87 +0,0 @@ -/**************************************************************************//** - * @file core_cmInstr.h - * @brief CMSIS Cortex-M Core Instruction Access Header File - * @version V4.30 - * @date 20. October 2015 - ******************************************************************************/ -/* Copyright (c) 2009 - 2015 ARM LIMITED - - All rights reserved. - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - Neither the name of ARM nor the names of its contributors may be used - to endorse or promote products derived from this software without - specific prior written permission. - * - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - ---------------------------------------------------------------------------*/ - - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CMINSTR_H -#define __CORE_CMINSTR_H - - -/* ########################## Core Instruction Access ######################### */ -/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface - Access to dedicated instructions - @{ -*/ - -/*------------------ RealView Compiler -----------------*/ -#if defined ( __CC_ARM ) - #include "cmsis_armcc.h" - -/*------------------ ARM Compiler V6 -------------------*/ -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #include "cmsis_armcc_V6.h" - -/*------------------ GNU Compiler ----------------------*/ -#elif defined ( __GNUC__ ) - #include "cmsis_gcc.h" - -/*------------------ ICC Compiler ----------------------*/ -#elif defined ( __ICCARM__ ) - #include <cmsis_iar.h> - -/*------------------ TI CCS Compiler -------------------*/ -#elif defined ( __TMS470__ ) - #include <cmsis_ccs.h> - -/*------------------ TASKING Compiler ------------------*/ -#elif defined ( __TASKING__ ) - /* - * The CMSIS functions have been implemented as intrinsics in the compiler. - * Please use "carm -?i" to get an up to date list of all intrinsics, - * Including the CMSIS ones. - */ - -/*------------------ COSMIC Compiler -------------------*/ -#elif defined ( __CSMC__ ) - #include <cmsis_csm.h> - -#endif - -/*@}*/ /* end of group CMSIS_Core_InstructionInterface */ - -#endif /* __CORE_CMINSTR_H */ diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_cmSimd.h b/stm32cubemx/Drivers/CMSIS/Include/core_cmSimd.h deleted file mode 100644 index 66bf5c2..0000000 --- a/stm32cubemx/Drivers/CMSIS/Include/core_cmSimd.h +++ /dev/null @@ -1,96 +0,0 @@ -/**************************************************************************//** - * @file core_cmSimd.h - * @brief CMSIS Cortex-M SIMD Header File - * @version V4.30 - * @date 20. October 2015 - ******************************************************************************/ -/* Copyright (c) 2009 - 2015 ARM LIMITED - - All rights reserved. - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - Neither the name of ARM nor the names of its contributors may be used - to endorse or promote products derived from this software without - specific prior written permission. - * - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - ---------------------------------------------------------------------------*/ - - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_CMSIMD_H -#define __CORE_CMSIMD_H - -#ifdef __cplusplus - extern "C" { -#endif - - -/* ################### Compiler specific Intrinsics ########################### */ -/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics - Access to dedicated SIMD instructions - @{ -*/ - -/*------------------ RealView Compiler -----------------*/ -#if defined ( __CC_ARM ) - #include "cmsis_armcc.h" - -/*------------------ ARM Compiler V6 -------------------*/ -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #include "cmsis_armcc_V6.h" - -/*------------------ GNU Compiler ----------------------*/ -#elif defined ( __GNUC__ ) - #include "cmsis_gcc.h" - -/*------------------ ICC Compiler ----------------------*/ -#elif defined ( __ICCARM__ ) - #include <cmsis_iar.h> - -/*------------------ TI CCS Compiler -------------------*/ -#elif defined ( __TMS470__ ) - #include <cmsis_ccs.h> - -/*------------------ TASKING Compiler ------------------*/ -#elif defined ( __TASKING__ ) - /* - * The CMSIS functions have been implemented as intrinsics in the compiler. - * Please use "carm -?i" to get an up to date list of all intrinsics, - * Including the CMSIS ones. - */ - -/*------------------ COSMIC Compiler -------------------*/ -#elif defined ( __CSMC__ ) - #include <cmsis_csm.h> - -#endif - -/*@} end of group CMSIS_SIMD_intrinsics */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_CMSIMD_H */ diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_sc000.h b/stm32cubemx/Drivers/CMSIS/Include/core_sc000.h deleted file mode 100644 index 514dbd8..0000000 --- a/stm32cubemx/Drivers/CMSIS/Include/core_sc000.h +++ /dev/null @@ -1,926 +0,0 @@ -/**************************************************************************//** - * @file core_sc000.h - * @brief CMSIS SC000 Core Peripheral Access Layer Header File - * @version V4.30 - * @date 20. October 2015 - ******************************************************************************/ -/* Copyright (c) 2009 - 2015 ARM LIMITED - - All rights reserved. - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - Neither the name of ARM nor the names of its contributors may be used - to endorse or promote products derived from this software without - specific prior written permission. - * - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - ---------------------------------------------------------------------------*/ - - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_SC000_H_GENERIC -#define __CORE_SC000_H_GENERIC - -#include <stdint.h> - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.<br> - Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> - Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.<br> - Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup SC000 - @{ - */ - -/* CMSIS SC000 definitions */ -#define __SC000_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */ -#define __SC000_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */ -#define __SC000_CMSIS_VERSION ((__SC000_CMSIS_VERSION_MAIN << 16U) | \ - __SC000_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ - -#define __CORTEX_SC (000U) /*!< Cortex secure core */ - - -#if defined ( __CC_ARM ) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline - -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline - -#elif defined ( __GNUC__ ) - #define __ASM __asm /*!< asm keyword for GNU Compiler */ - #define __INLINE inline /*!< inline keyword for GNU Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __ICCARM__ ) - #define __ASM __asm /*!< asm keyword for IAR Compiler */ - #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ - #define __STATIC_INLINE static inline - -#elif defined ( __TMS470__ ) - #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __TASKING__ ) - #define __ASM __asm /*!< asm keyword for TASKING Compiler */ - #define __INLINE inline /*!< inline keyword for TASKING Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __CSMC__ ) - #define __packed - #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ - #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */ - #define __STATIC_INLINE static inline - -#else - #error Unknown compiler -#endif - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TMS470__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "core_cmInstr.h" /* Core Instruction Access */ -#include "core_cmFunc.h" /* Core Function Access */ - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_SC000_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_SC000_H_DEPENDANT -#define __CORE_SC000_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __SC000_REV - #define __SC000_REV 0x0000U - #warning "__SC000_REV not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 2U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - <strong>IO Type Qualifiers</strong> are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group SC000 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core MPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t _reserved0:1; /*!< bit: 0 Reserved */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[31U]; - __IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[31U]; - __IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[31U]; - __IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[31U]; - uint32_t RESERVED4[64U]; - __IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */ -} NVIC_Type; - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - uint32_t RESERVED0[1U]; - __IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - uint32_t RESERVED1[154U]; - __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */ -} SCnSCB_Type; - -/* Auxiliary Control Register Definitions */ -#define SCnSCB_ACTLR_DISMCYCINT_Pos 0U /*!< ACTLR: DISMCYCINT Position */ -#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/) /*!< ACTLR: DISMCYCINT Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - -#if (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ -} MPU_Type; - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 8U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor. - Therefore they are not covered by the SC000 header file. - @{ - */ -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of SC000 Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ - -#if (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -/* Interrupt Priorities are WORD accessible only under ARMv6M */ -/* The following MACROS handle generation of the register offset and byte masks */ -#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL) -#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) ) -#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) ) - - -/** - \brief Enable External Interrupt - \details Enables a device-specific interrupt in the NVIC interrupt controller. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) -{ - NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Disable External Interrupt - \details Disables a device-specific interrupt in the NVIC interrupt controller. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) -{ - NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Get Pending Interrupt - \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt. - \param [in] IRQn Interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - */ -__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of an external interrupt. - \param [in] IRQn Interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of an external interrupt. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of an interrupt. - \note The priority cannot be set for every core interrupt. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - */ -__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) < 0) - { - SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } - else - { - NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) | - (((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn))); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of an interrupt. - The interrupt number can be positive to specify an external (device specific) interrupt, - or negative to specify an internal (core) interrupt. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) < 0) - { - return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__STATIC_INLINE void NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - SCB_AIRCR_SYSRESETREQ_Msk); - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the - function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_SC000_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/stm32cubemx/Drivers/CMSIS/Include/core_sc300.h b/stm32cubemx/Drivers/CMSIS/Include/core_sc300.h deleted file mode 100644 index 8bd18aa..0000000 --- a/stm32cubemx/Drivers/CMSIS/Include/core_sc300.h +++ /dev/null @@ -1,1745 +0,0 @@ -/**************************************************************************//** - * @file core_sc300.h - * @brief CMSIS SC300 Core Peripheral Access Layer Header File - * @version V4.30 - * @date 20. October 2015 - ******************************************************************************/ -/* Copyright (c) 2009 - 2015 ARM LIMITED - - All rights reserved. - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions are met: - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - Neither the name of ARM nor the names of its contributors may be used - to endorse or promote products derived from this software without - specific prior written permission. - * - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - POSSIBILITY OF SUCH DAMAGE. - ---------------------------------------------------------------------------*/ - - -#if defined ( __ICCARM__ ) - #pragma system_include /* treat file as system include file for MISRA check */ -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #pragma clang system_header /* treat file as system include file */ -#endif - -#ifndef __CORE_SC300_H_GENERIC -#define __CORE_SC300_H_GENERIC - -#include <stdint.h> - -#ifdef __cplusplus - extern "C" { -#endif - -/** - \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions - CMSIS violates the following MISRA-C:2004 rules: - - \li Required Rule 8.5, object/function definition in header file.<br> - Function definitions in header files are used to allow 'inlining'. - - \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br> - Unions are used for effective representation of core registers. - - \li Advisory Rule 19.7, Function-like macro defined.<br> - Function-like macros are used to allow more efficient code. - */ - - -/******************************************************************************* - * CMSIS definitions - ******************************************************************************/ -/** - \ingroup SC3000 - @{ - */ - -/* CMSIS SC300 definitions */ -#define __SC300_CMSIS_VERSION_MAIN (0x04U) /*!< [31:16] CMSIS HAL main version */ -#define __SC300_CMSIS_VERSION_SUB (0x1EU) /*!< [15:0] CMSIS HAL sub version */ -#define __SC300_CMSIS_VERSION ((__SC300_CMSIS_VERSION_MAIN << 16U) | \ - __SC300_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */ - -#define __CORTEX_SC (300U) /*!< Cortex secure core */ - - -#if defined ( __CC_ARM ) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline - -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - #define __STATIC_INLINE static __inline - -#elif defined ( __GNUC__ ) - #define __ASM __asm /*!< asm keyword for GNU Compiler */ - #define __INLINE inline /*!< inline keyword for GNU Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __ICCARM__ ) - #define __ASM __asm /*!< asm keyword for IAR Compiler */ - #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */ - #define __STATIC_INLINE static inline - -#elif defined ( __TMS470__ ) - #define __ASM __asm /*!< asm keyword for TI CCS Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __TASKING__ ) - #define __ASM __asm /*!< asm keyword for TASKING Compiler */ - #define __INLINE inline /*!< inline keyword for TASKING Compiler */ - #define __STATIC_INLINE static inline - -#elif defined ( __CSMC__ ) - #define __packed - #define __ASM _asm /*!< asm keyword for COSMIC Compiler */ - #define __INLINE inline /*!< inline keyword for COSMIC Compiler. Use -pc99 on compile line */ - #define __STATIC_INLINE static inline - -#else - #error Unknown compiler -#endif - -/** __FPU_USED indicates whether an FPU is used or not. - This core does not support an FPU at all -*/ -#define __FPU_USED 0U - -#if defined ( __CC_ARM ) - #if defined __TARGET_FPU_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined(__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) - #if defined __ARM_PCS_VFP - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __GNUC__ ) - #if defined (__VFP_FP__) && !defined(__SOFTFP__) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __ICCARM__ ) - #if defined __ARMVFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TMS470__ ) - #if defined __TI_VFP_SUPPORT__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __TASKING__ ) - #if defined __FPU_VFP__ - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#elif defined ( __CSMC__ ) - #if ( __CSMC__ & 0x400U) - #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)" - #endif - -#endif - -#include "core_cmInstr.h" /* Core Instruction Access */ -#include "core_cmFunc.h" /* Core Function Access */ - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_SC300_H_GENERIC */ - -#ifndef __CMSIS_GENERIC - -#ifndef __CORE_SC300_H_DEPENDANT -#define __CORE_SC300_H_DEPENDANT - -#ifdef __cplusplus - extern "C" { -#endif - -/* check device defines and use defaults */ -#if defined __CHECK_DEVICE_DEFINES - #ifndef __SC300_REV - #define __SC300_REV 0x0000U - #warning "__SC300_REV not defined in device header file; using default!" - #endif - - #ifndef __MPU_PRESENT - #define __MPU_PRESENT 0U - #warning "__MPU_PRESENT not defined in device header file; using default!" - #endif - - #ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 4U - #warning "__NVIC_PRIO_BITS not defined in device header file; using default!" - #endif - - #ifndef __Vendor_SysTickConfig - #define __Vendor_SysTickConfig 0U - #warning "__Vendor_SysTickConfig not defined in device header file; using default!" - #endif -#endif - -/* IO definitions (access restrictions to peripheral registers) */ -/** - \defgroup CMSIS_glob_defs CMSIS Global Defines - - <strong>IO Type Qualifiers</strong> are used - \li to specify the access to peripheral variables. - \li for automatic generation of peripheral register debug information. -*/ -#ifdef __cplusplus - #define __I volatile /*!< Defines 'read only' permissions */ -#else - #define __I volatile const /*!< Defines 'read only' permissions */ -#endif -#define __O volatile /*!< Defines 'write only' permissions */ -#define __IO volatile /*!< Defines 'read / write' permissions */ - -/* following defines should be used for structure members */ -#define __IM volatile const /*! Defines 'read only' structure member permissions */ -#define __OM volatile /*! Defines 'write only' structure member permissions */ -#define __IOM volatile /*! Defines 'read / write' structure member permissions */ - -/*@} end of group SC300 */ - - - -/******************************************************************************* - * Register Abstraction - Core Register contain: - - Core Register - - Core NVIC Register - - Core SCB Register - - Core SysTick Register - - Core Debug Register - - Core MPU Register - ******************************************************************************/ -/** - \defgroup CMSIS_core_register Defines and Type Definitions - \brief Type definitions and defines for Cortex-M processor based devices. -*/ - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CORE Status and Control Registers - \brief Core Register type definitions. - @{ - */ - -/** - \brief Union type to access the Application Program Status Register (APSR). - */ -typedef union -{ - struct - { - uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} APSR_Type; - -/* APSR Register Definitions */ -#define APSR_N_Pos 31U /*!< APSR: N Position */ -#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */ - -#define APSR_Z_Pos 30U /*!< APSR: Z Position */ -#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */ - -#define APSR_C_Pos 29U /*!< APSR: C Position */ -#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */ - -#define APSR_V_Pos 28U /*!< APSR: V Position */ -#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */ - -#define APSR_Q_Pos 27U /*!< APSR: Q Position */ -#define APSR_Q_Msk (1UL << APSR_Q_Pos) /*!< APSR: Q Mask */ - - -/** - \brief Union type to access the Interrupt Program Status Register (IPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} IPSR_Type; - -/* IPSR Register Definitions */ -#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */ -#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */ - - -/** - \brief Union type to access the Special-Purpose Program Status Registers (xPSR). - */ -typedef union -{ - struct - { - uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */ - uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */ - uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */ - uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */ - uint32_t Q:1; /*!< bit: 27 Saturation condition flag */ - uint32_t V:1; /*!< bit: 28 Overflow condition code flag */ - uint32_t C:1; /*!< bit: 29 Carry condition code flag */ - uint32_t Z:1; /*!< bit: 30 Zero condition code flag */ - uint32_t N:1; /*!< bit: 31 Negative condition code flag */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} xPSR_Type; - -/* xPSR Register Definitions */ -#define xPSR_N_Pos 31U /*!< xPSR: N Position */ -#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */ - -#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */ -#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */ - -#define xPSR_C_Pos 29U /*!< xPSR: C Position */ -#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */ - -#define xPSR_V_Pos 28U /*!< xPSR: V Position */ -#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */ - -#define xPSR_Q_Pos 27U /*!< xPSR: Q Position */ -#define xPSR_Q_Msk (1UL << xPSR_Q_Pos) /*!< xPSR: Q Mask */ - -#define xPSR_IT_Pos 25U /*!< xPSR: IT Position */ -#define xPSR_IT_Msk (3UL << xPSR_IT_Pos) /*!< xPSR: IT Mask */ - -#define xPSR_T_Pos 24U /*!< xPSR: T Position */ -#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */ - -#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */ -#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */ - - -/** - \brief Union type to access the Control Registers (CONTROL). - */ -typedef union -{ - struct - { - uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */ - uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */ - uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */ - } b; /*!< Structure used for bit access */ - uint32_t w; /*!< Type used for word access */ -} CONTROL_Type; - -/* CONTROL Register Definitions */ -#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */ -#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */ - -#define CONTROL_nPRIV_Pos 0U /*!< CONTROL: nPRIV Position */ -#define CONTROL_nPRIV_Msk (1UL /*<< CONTROL_nPRIV_Pos*/) /*!< CONTROL: nPRIV Mask */ - -/*@} end of group CMSIS_CORE */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC) - \brief Type definitions for the NVIC Registers - @{ - */ - -/** - \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC). - */ -typedef struct -{ - __IOM uint32_t ISER[8U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */ - uint32_t RESERVED0[24U]; - __IOM uint32_t ICER[8U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */ - uint32_t RSERVED1[24U]; - __IOM uint32_t ISPR[8U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */ - uint32_t RESERVED2[24U]; - __IOM uint32_t ICPR[8U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */ - uint32_t RESERVED3[24U]; - __IOM uint32_t IABR[8U]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */ - uint32_t RESERVED4[56U]; - __IOM uint8_t IP[240U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */ - uint32_t RESERVED5[644U]; - __OM uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */ -} NVIC_Type; - -/* Software Triggered Interrupt Register Definitions */ -#define NVIC_STIR_INTID_Pos 0U /*!< STIR: INTLINESNUM Position */ -#define NVIC_STIR_INTID_Msk (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/) /*!< STIR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_NVIC */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCB System Control Block (SCB) - \brief Type definitions for the System Control Block Registers - @{ - */ - -/** - \brief Structure type to access the System Control Block (SCB). - */ -typedef struct -{ - __IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */ - __IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */ - __IOM uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */ - __IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */ - __IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */ - __IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */ - __IOM uint8_t SHP[12U]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */ - __IOM uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */ - __IOM uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */ - __IOM uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */ - __IOM uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */ - __IOM uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */ - __IOM uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */ - __IM uint32_t PFR[2U]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */ - __IM uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */ - __IM uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */ - __IM uint32_t MMFR[4U]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */ - __IM uint32_t ISAR[5U]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */ - uint32_t RESERVED0[5U]; - __IOM uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */ - uint32_t RESERVED1[129U]; - __IOM uint32_t SFCR; /*!< Offset: 0x290 (R/W) Security Features Control Register */ -} SCB_Type; - -/* SCB CPUID Register Definitions */ -#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */ -#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ - -#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */ -#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ - -#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */ -#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */ - -#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */ -#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ - -#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */ -#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */ - -/* SCB Interrupt Control State Register Definitions */ -#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */ -#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ - -#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */ -#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ - -#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */ -#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ - -#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */ -#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ - -#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */ -#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ - -#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */ -#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ - -#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */ -#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ - -#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */ -#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ - -#define SCB_ICSR_RETTOBASE_Pos 11U /*!< SCB ICSR: RETTOBASE Position */ -#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ - -#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */ -#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */ - -/* SCB Vector Table Offset Register Definitions */ -#define SCB_VTOR_TBLBASE_Pos 29U /*!< SCB VTOR: TBLBASE Position */ -#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ - -#define SCB_VTOR_TBLOFF_Pos 7U /*!< SCB VTOR: TBLOFF Position */ -#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ - -/* SCB Application Interrupt and Reset Control Register Definitions */ -#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */ -#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ - -#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */ -#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ - -#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */ -#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ - -#define SCB_AIRCR_PRIGROUP_Pos 8U /*!< SCB AIRCR: PRIGROUP Position */ -#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ - -#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */ -#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ - -#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */ -#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ - -#define SCB_AIRCR_VECTRESET_Pos 0U /*!< SCB AIRCR: VECTRESET Position */ -#define SCB_AIRCR_VECTRESET_Msk (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/) /*!< SCB AIRCR: VECTRESET Mask */ - -/* SCB System Control Register Definitions */ -#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */ -#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ - -#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */ -#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ - -#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */ -#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ - -/* SCB Configuration Control Register Definitions */ -#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */ -#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ - -#define SCB_CCR_BFHFNMIGN_Pos 8U /*!< SCB CCR: BFHFNMIGN Position */ -#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ - -#define SCB_CCR_DIV_0_TRP_Pos 4U /*!< SCB CCR: DIV_0_TRP Position */ -#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ - -#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */ -#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ - -#define SCB_CCR_USERSETMPEND_Pos 1U /*!< SCB CCR: USERSETMPEND Position */ -#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ - -#define SCB_CCR_NONBASETHRDENA_Pos 0U /*!< SCB CCR: NONBASETHRDENA Position */ -#define SCB_CCR_NONBASETHRDENA_Msk (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/) /*!< SCB CCR: NONBASETHRDENA Mask */ - -/* SCB System Handler Control and State Register Definitions */ -#define SCB_SHCSR_USGFAULTENA_Pos 18U /*!< SCB SHCSR: USGFAULTENA Position */ -#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ - -#define SCB_SHCSR_BUSFAULTENA_Pos 17U /*!< SCB SHCSR: BUSFAULTENA Position */ -#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ - -#define SCB_SHCSR_MEMFAULTENA_Pos 16U /*!< SCB SHCSR: MEMFAULTENA Position */ -#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ - -#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */ -#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ - -#define SCB_SHCSR_BUSFAULTPENDED_Pos 14U /*!< SCB SHCSR: BUSFAULTPENDED Position */ -#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ - -#define SCB_SHCSR_MEMFAULTPENDED_Pos 13U /*!< SCB SHCSR: MEMFAULTPENDED Position */ -#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ - -#define SCB_SHCSR_USGFAULTPENDED_Pos 12U /*!< SCB SHCSR: USGFAULTPENDED Position */ -#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ - -#define SCB_SHCSR_SYSTICKACT_Pos 11U /*!< SCB SHCSR: SYSTICKACT Position */ -#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ - -#define SCB_SHCSR_PENDSVACT_Pos 10U /*!< SCB SHCSR: PENDSVACT Position */ -#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ - -#define SCB_SHCSR_MONITORACT_Pos 8U /*!< SCB SHCSR: MONITORACT Position */ -#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ - -#define SCB_SHCSR_SVCALLACT_Pos 7U /*!< SCB SHCSR: SVCALLACT Position */ -#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ - -#define SCB_SHCSR_USGFAULTACT_Pos 3U /*!< SCB SHCSR: USGFAULTACT Position */ -#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ - -#define SCB_SHCSR_BUSFAULTACT_Pos 1U /*!< SCB SHCSR: BUSFAULTACT Position */ -#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ - -#define SCB_SHCSR_MEMFAULTACT_Pos 0U /*!< SCB SHCSR: MEMFAULTACT Position */ -#define SCB_SHCSR_MEMFAULTACT_Msk (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/) /*!< SCB SHCSR: MEMFAULTACT Mask */ - -/* SCB Configurable Fault Status Register Definitions */ -#define SCB_CFSR_USGFAULTSR_Pos 16U /*!< SCB CFSR: Usage Fault Status Register Position */ -#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ - -#define SCB_CFSR_BUSFAULTSR_Pos 8U /*!< SCB CFSR: Bus Fault Status Register Position */ -#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ - -#define SCB_CFSR_MEMFAULTSR_Pos 0U /*!< SCB CFSR: Memory Manage Fault Status Register Position */ -#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ - -/* SCB Hard Fault Status Register Definitions */ -#define SCB_HFSR_DEBUGEVT_Pos 31U /*!< SCB HFSR: DEBUGEVT Position */ -#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ - -#define SCB_HFSR_FORCED_Pos 30U /*!< SCB HFSR: FORCED Position */ -#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ - -#define SCB_HFSR_VECTTBL_Pos 1U /*!< SCB HFSR: VECTTBL Position */ -#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ - -/* SCB Debug Fault Status Register Definitions */ -#define SCB_DFSR_EXTERNAL_Pos 4U /*!< SCB DFSR: EXTERNAL Position */ -#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ - -#define SCB_DFSR_VCATCH_Pos 3U /*!< SCB DFSR: VCATCH Position */ -#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ - -#define SCB_DFSR_DWTTRAP_Pos 2U /*!< SCB DFSR: DWTTRAP Position */ -#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ - -#define SCB_DFSR_BKPT_Pos 1U /*!< SCB DFSR: BKPT Position */ -#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ - -#define SCB_DFSR_HALTED_Pos 0U /*!< SCB DFSR: HALTED Position */ -#define SCB_DFSR_HALTED_Msk (1UL /*<< SCB_DFSR_HALTED_Pos*/) /*!< SCB DFSR: HALTED Mask */ - -/*@} end of group CMSIS_SCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB) - \brief Type definitions for the System Control and ID Register not in the SCB - @{ - */ - -/** - \brief Structure type to access the System Control and ID Register not in the SCB. - */ -typedef struct -{ - uint32_t RESERVED0[1U]; - __IM uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */ - uint32_t RESERVED1[1U]; -} SCnSCB_Type; - -/* Interrupt Controller Type Register Definitions */ -#define SCnSCB_ICTR_INTLINESNUM_Pos 0U /*!< ICTR: INTLINESNUM Position */ -#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/) /*!< ICTR: INTLINESNUM Mask */ - -/*@} end of group CMSIS_SCnotSCB */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_SysTick System Tick Timer (SysTick) - \brief Type definitions for the System Timer Registers. - @{ - */ - -/** - \brief Structure type to access the System Timer (SysTick). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */ - __IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */ - __IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */ - __IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */ -} SysTick_Type; - -/* SysTick Control / Status Register Definitions */ -#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */ -#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ - -#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */ -#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ - -#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */ -#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ - -#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */ -#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */ - -/* SysTick Reload Register Definitions */ -#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */ -#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */ - -/* SysTick Current Register Definitions */ -#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */ -#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */ - -/* SysTick Calibration Register Definitions */ -#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */ -#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ - -#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */ -#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ - -#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */ -#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */ - -/*@} end of group CMSIS_SysTick */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM) - \brief Type definitions for the Instrumentation Trace Macrocell (ITM) - @{ - */ - -/** - \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM). - */ -typedef struct -{ - __OM union - { - __OM uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */ - __OM uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */ - __OM uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */ - } PORT [32U]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */ - uint32_t RESERVED0[864U]; - __IOM uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */ - uint32_t RESERVED1[15U]; - __IOM uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */ - uint32_t RESERVED2[15U]; - __IOM uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */ - uint32_t RESERVED3[29U]; - __OM uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */ - __IM uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */ - __IOM uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */ - uint32_t RESERVED4[43U]; - __OM uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */ - __IM uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */ - uint32_t RESERVED5[6U]; - __IM uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */ - __IM uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */ - __IM uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */ - __IM uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */ - __IM uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */ - __IM uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */ - __IM uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */ - __IM uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */ - __IM uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */ - __IM uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */ - __IM uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */ - __IM uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */ -} ITM_Type; - -/* ITM Trace Privilege Register Definitions */ -#define ITM_TPR_PRIVMASK_Pos 0U /*!< ITM TPR: PRIVMASK Position */ -#define ITM_TPR_PRIVMASK_Msk (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/) /*!< ITM TPR: PRIVMASK Mask */ - -/* ITM Trace Control Register Definitions */ -#define ITM_TCR_BUSY_Pos 23U /*!< ITM TCR: BUSY Position */ -#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ - -#define ITM_TCR_TraceBusID_Pos 16U /*!< ITM TCR: ATBID Position */ -#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */ - -#define ITM_TCR_GTSFREQ_Pos 10U /*!< ITM TCR: Global timestamp frequency Position */ -#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */ - -#define ITM_TCR_TSPrescale_Pos 8U /*!< ITM TCR: TSPrescale Position */ -#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ - -#define ITM_TCR_SWOENA_Pos 4U /*!< ITM TCR: SWOENA Position */ -#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ - -#define ITM_TCR_DWTENA_Pos 3U /*!< ITM TCR: DWTENA Position */ -#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ - -#define ITM_TCR_SYNCENA_Pos 2U /*!< ITM TCR: SYNCENA Position */ -#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ - -#define ITM_TCR_TSENA_Pos 1U /*!< ITM TCR: TSENA Position */ -#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ - -#define ITM_TCR_ITMENA_Pos 0U /*!< ITM TCR: ITM Enable bit Position */ -#define ITM_TCR_ITMENA_Msk (1UL /*<< ITM_TCR_ITMENA_Pos*/) /*!< ITM TCR: ITM Enable bit Mask */ - -/* ITM Integration Write Register Definitions */ -#define ITM_IWR_ATVALIDM_Pos 0U /*!< ITM IWR: ATVALIDM Position */ -#define ITM_IWR_ATVALIDM_Msk (1UL /*<< ITM_IWR_ATVALIDM_Pos*/) /*!< ITM IWR: ATVALIDM Mask */ - -/* ITM Integration Read Register Definitions */ -#define ITM_IRR_ATREADYM_Pos 0U /*!< ITM IRR: ATREADYM Position */ -#define ITM_IRR_ATREADYM_Msk (1UL /*<< ITM_IRR_ATREADYM_Pos*/) /*!< ITM IRR: ATREADYM Mask */ - -/* ITM Integration Mode Control Register Definitions */ -#define ITM_IMCR_INTEGRATION_Pos 0U /*!< ITM IMCR: INTEGRATION Position */ -#define ITM_IMCR_INTEGRATION_Msk (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/) /*!< ITM IMCR: INTEGRATION Mask */ - -/* ITM Lock Status Register Definitions */ -#define ITM_LSR_ByteAcc_Pos 2U /*!< ITM LSR: ByteAcc Position */ -#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ - -#define ITM_LSR_Access_Pos 1U /*!< ITM LSR: Access Position */ -#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ - -#define ITM_LSR_Present_Pos 0U /*!< ITM LSR: Present Position */ -#define ITM_LSR_Present_Msk (1UL /*<< ITM_LSR_Present_Pos*/) /*!< ITM LSR: Present Mask */ - -/*@}*/ /* end of group CMSIS_ITM */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT) - \brief Type definitions for the Data Watchpoint and Trace (DWT) - @{ - */ - -/** - \brief Structure type to access the Data Watchpoint and Trace Register (DWT). - */ -typedef struct -{ - __IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */ - __IOM uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */ - __IOM uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */ - __IOM uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */ - __IOM uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */ - __IOM uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */ - __IOM uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */ - __IM uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */ - __IOM uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */ - __IOM uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */ - __IOM uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */ - uint32_t RESERVED0[1U]; - __IOM uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */ - __IOM uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */ - __IOM uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */ - uint32_t RESERVED1[1U]; - __IOM uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */ - __IOM uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */ - __IOM uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */ - uint32_t RESERVED2[1U]; - __IOM uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */ - __IOM uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */ - __IOM uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */ -} DWT_Type; - -/* DWT Control Register Definitions */ -#define DWT_CTRL_NUMCOMP_Pos 28U /*!< DWT CTRL: NUMCOMP Position */ -#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */ - -#define DWT_CTRL_NOTRCPKT_Pos 27U /*!< DWT CTRL: NOTRCPKT Position */ -#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */ - -#define DWT_CTRL_NOEXTTRIG_Pos 26U /*!< DWT CTRL: NOEXTTRIG Position */ -#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */ - -#define DWT_CTRL_NOCYCCNT_Pos 25U /*!< DWT CTRL: NOCYCCNT Position */ -#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */ - -#define DWT_CTRL_NOPRFCNT_Pos 24U /*!< DWT CTRL: NOPRFCNT Position */ -#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */ - -#define DWT_CTRL_CYCEVTENA_Pos 22U /*!< DWT CTRL: CYCEVTENA Position */ -#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */ - -#define DWT_CTRL_FOLDEVTENA_Pos 21U /*!< DWT CTRL: FOLDEVTENA Position */ -#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */ - -#define DWT_CTRL_LSUEVTENA_Pos 20U /*!< DWT CTRL: LSUEVTENA Position */ -#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */ - -#define DWT_CTRL_SLEEPEVTENA_Pos 19U /*!< DWT CTRL: SLEEPEVTENA Position */ -#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */ - -#define DWT_CTRL_EXCEVTENA_Pos 18U /*!< DWT CTRL: EXCEVTENA Position */ -#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */ - -#define DWT_CTRL_CPIEVTENA_Pos 17U /*!< DWT CTRL: CPIEVTENA Position */ -#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */ - -#define DWT_CTRL_EXCTRCENA_Pos 16U /*!< DWT CTRL: EXCTRCENA Position */ -#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */ - -#define DWT_CTRL_PCSAMPLENA_Pos 12U /*!< DWT CTRL: PCSAMPLENA Position */ -#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */ - -#define DWT_CTRL_SYNCTAP_Pos 10U /*!< DWT CTRL: SYNCTAP Position */ -#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */ - -#define DWT_CTRL_CYCTAP_Pos 9U /*!< DWT CTRL: CYCTAP Position */ -#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */ - -#define DWT_CTRL_POSTINIT_Pos 5U /*!< DWT CTRL: POSTINIT Position */ -#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */ - -#define DWT_CTRL_POSTPRESET_Pos 1U /*!< DWT CTRL: POSTPRESET Position */ -#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */ - -#define DWT_CTRL_CYCCNTENA_Pos 0U /*!< DWT CTRL: CYCCNTENA Position */ -#define DWT_CTRL_CYCCNTENA_Msk (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/) /*!< DWT CTRL: CYCCNTENA Mask */ - -/* DWT CPI Count Register Definitions */ -#define DWT_CPICNT_CPICNT_Pos 0U /*!< DWT CPICNT: CPICNT Position */ -#define DWT_CPICNT_CPICNT_Msk (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/) /*!< DWT CPICNT: CPICNT Mask */ - -/* DWT Exception Overhead Count Register Definitions */ -#define DWT_EXCCNT_EXCCNT_Pos 0U /*!< DWT EXCCNT: EXCCNT Position */ -#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/) /*!< DWT EXCCNT: EXCCNT Mask */ - -/* DWT Sleep Count Register Definitions */ -#define DWT_SLEEPCNT_SLEEPCNT_Pos 0U /*!< DWT SLEEPCNT: SLEEPCNT Position */ -#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/) /*!< DWT SLEEPCNT: SLEEPCNT Mask */ - -/* DWT LSU Count Register Definitions */ -#define DWT_LSUCNT_LSUCNT_Pos 0U /*!< DWT LSUCNT: LSUCNT Position */ -#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/) /*!< DWT LSUCNT: LSUCNT Mask */ - -/* DWT Folded-instruction Count Register Definitions */ -#define DWT_FOLDCNT_FOLDCNT_Pos 0U /*!< DWT FOLDCNT: FOLDCNT Position */ -#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/) /*!< DWT FOLDCNT: FOLDCNT Mask */ - -/* DWT Comparator Mask Register Definitions */ -#define DWT_MASK_MASK_Pos 0U /*!< DWT MASK: MASK Position */ -#define DWT_MASK_MASK_Msk (0x1FUL /*<< DWT_MASK_MASK_Pos*/) /*!< DWT MASK: MASK Mask */ - -/* DWT Comparator Function Register Definitions */ -#define DWT_FUNCTION_MATCHED_Pos 24U /*!< DWT FUNCTION: MATCHED Position */ -#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */ - -#define DWT_FUNCTION_DATAVADDR1_Pos 16U /*!< DWT FUNCTION: DATAVADDR1 Position */ -#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */ - -#define DWT_FUNCTION_DATAVADDR0_Pos 12U /*!< DWT FUNCTION: DATAVADDR0 Position */ -#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */ - -#define DWT_FUNCTION_DATAVSIZE_Pos 10U /*!< DWT FUNCTION: DATAVSIZE Position */ -#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */ - -#define DWT_FUNCTION_LNK1ENA_Pos 9U /*!< DWT FUNCTION: LNK1ENA Position */ -#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */ - -#define DWT_FUNCTION_DATAVMATCH_Pos 8U /*!< DWT FUNCTION: DATAVMATCH Position */ -#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */ - -#define DWT_FUNCTION_CYCMATCH_Pos 7U /*!< DWT FUNCTION: CYCMATCH Position */ -#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */ - -#define DWT_FUNCTION_EMITRANGE_Pos 5U /*!< DWT FUNCTION: EMITRANGE Position */ -#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */ - -#define DWT_FUNCTION_FUNCTION_Pos 0U /*!< DWT FUNCTION: FUNCTION Position */ -#define DWT_FUNCTION_FUNCTION_Msk (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/) /*!< DWT FUNCTION: FUNCTION Mask */ - -/*@}*/ /* end of group CMSIS_DWT */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_TPI Trace Port Interface (TPI) - \brief Type definitions for the Trace Port Interface (TPI) - @{ - */ - -/** - \brief Structure type to access the Trace Port Interface Register (TPI). - */ -typedef struct -{ - __IOM uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */ - __IOM uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */ - uint32_t RESERVED0[2U]; - __IOM uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */ - uint32_t RESERVED1[55U]; - __IOM uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */ - uint32_t RESERVED2[131U]; - __IM uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */ - __IOM uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */ - __IM uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */ - uint32_t RESERVED3[759U]; - __IM uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */ - __IM uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */ - __IM uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */ - uint32_t RESERVED4[1U]; - __IM uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */ - __IM uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */ - __IOM uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */ - uint32_t RESERVED5[39U]; - __IOM uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */ - __IOM uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */ - uint32_t RESERVED7[8U]; - __IM uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */ - __IM uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */ -} TPI_Type; - -/* TPI Asynchronous Clock Prescaler Register Definitions */ -#define TPI_ACPR_PRESCALER_Pos 0U /*!< TPI ACPR: PRESCALER Position */ -#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/) /*!< TPI ACPR: PRESCALER Mask */ - -/* TPI Selected Pin Protocol Register Definitions */ -#define TPI_SPPR_TXMODE_Pos 0U /*!< TPI SPPR: TXMODE Position */ -#define TPI_SPPR_TXMODE_Msk (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/) /*!< TPI SPPR: TXMODE Mask */ - -/* TPI Formatter and Flush Status Register Definitions */ -#define TPI_FFSR_FtNonStop_Pos 3U /*!< TPI FFSR: FtNonStop Position */ -#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */ - -#define TPI_FFSR_TCPresent_Pos 2U /*!< TPI FFSR: TCPresent Position */ -#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */ - -#define TPI_FFSR_FtStopped_Pos 1U /*!< TPI FFSR: FtStopped Position */ -#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */ - -#define TPI_FFSR_FlInProg_Pos 0U /*!< TPI FFSR: FlInProg Position */ -#define TPI_FFSR_FlInProg_Msk (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/) /*!< TPI FFSR: FlInProg Mask */ - -/* TPI Formatter and Flush Control Register Definitions */ -#define TPI_FFCR_TrigIn_Pos 8U /*!< TPI FFCR: TrigIn Position */ -#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */ - -#define TPI_FFCR_EnFCont_Pos 1U /*!< TPI FFCR: EnFCont Position */ -#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */ - -/* TPI TRIGGER Register Definitions */ -#define TPI_TRIGGER_TRIGGER_Pos 0U /*!< TPI TRIGGER: TRIGGER Position */ -#define TPI_TRIGGER_TRIGGER_Msk (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/) /*!< TPI TRIGGER: TRIGGER Mask */ - -/* TPI Integration ETM Data Register Definitions (FIFO0) */ -#define TPI_FIFO0_ITM_ATVALID_Pos 29U /*!< TPI FIFO0: ITM_ATVALID Position */ -#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */ - -#define TPI_FIFO0_ITM_bytecount_Pos 27U /*!< TPI FIFO0: ITM_bytecount Position */ -#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */ - -#define TPI_FIFO0_ETM_ATVALID_Pos 26U /*!< TPI FIFO0: ETM_ATVALID Position */ -#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */ - -#define TPI_FIFO0_ETM_bytecount_Pos 24U /*!< TPI FIFO0: ETM_bytecount Position */ -#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */ - -#define TPI_FIFO0_ETM2_Pos 16U /*!< TPI FIFO0: ETM2 Position */ -#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */ - -#define TPI_FIFO0_ETM1_Pos 8U /*!< TPI FIFO0: ETM1 Position */ -#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */ - -#define TPI_FIFO0_ETM0_Pos 0U /*!< TPI FIFO0: ETM0 Position */ -#define TPI_FIFO0_ETM0_Msk (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/) /*!< TPI FIFO0: ETM0 Mask */ - -/* TPI ITATBCTR2 Register Definitions */ -#define TPI_ITATBCTR2_ATREADY_Pos 0U /*!< TPI ITATBCTR2: ATREADY Position */ -#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/) /*!< TPI ITATBCTR2: ATREADY Mask */ - -/* TPI Integration ITM Data Register Definitions (FIFO1) */ -#define TPI_FIFO1_ITM_ATVALID_Pos 29U /*!< TPI FIFO1: ITM_ATVALID Position */ -#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */ - -#define TPI_FIFO1_ITM_bytecount_Pos 27U /*!< TPI FIFO1: ITM_bytecount Position */ -#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */ - -#define TPI_FIFO1_ETM_ATVALID_Pos 26U /*!< TPI FIFO1: ETM_ATVALID Position */ -#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */ - -#define TPI_FIFO1_ETM_bytecount_Pos 24U /*!< TPI FIFO1: ETM_bytecount Position */ -#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */ - -#define TPI_FIFO1_ITM2_Pos 16U /*!< TPI FIFO1: ITM2 Position */ -#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */ - -#define TPI_FIFO1_ITM1_Pos 8U /*!< TPI FIFO1: ITM1 Position */ -#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */ - -#define TPI_FIFO1_ITM0_Pos 0U /*!< TPI FIFO1: ITM0 Position */ -#define TPI_FIFO1_ITM0_Msk (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/) /*!< TPI FIFO1: ITM0 Mask */ - -/* TPI ITATBCTR0 Register Definitions */ -#define TPI_ITATBCTR0_ATREADY_Pos 0U /*!< TPI ITATBCTR0: ATREADY Position */ -#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/) /*!< TPI ITATBCTR0: ATREADY Mask */ - -/* TPI Integration Mode Control Register Definitions */ -#define TPI_ITCTRL_Mode_Pos 0U /*!< TPI ITCTRL: Mode Position */ -#define TPI_ITCTRL_Mode_Msk (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/) /*!< TPI ITCTRL: Mode Mask */ - -/* TPI DEVID Register Definitions */ -#define TPI_DEVID_NRZVALID_Pos 11U /*!< TPI DEVID: NRZVALID Position */ -#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */ - -#define TPI_DEVID_MANCVALID_Pos 10U /*!< TPI DEVID: MANCVALID Position */ -#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */ - -#define TPI_DEVID_PTINVALID_Pos 9U /*!< TPI DEVID: PTINVALID Position */ -#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */ - -#define TPI_DEVID_MinBufSz_Pos 6U /*!< TPI DEVID: MinBufSz Position */ -#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */ - -#define TPI_DEVID_AsynClkIn_Pos 5U /*!< TPI DEVID: AsynClkIn Position */ -#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */ - -#define TPI_DEVID_NrTraceInput_Pos 0U /*!< TPI DEVID: NrTraceInput Position */ -#define TPI_DEVID_NrTraceInput_Msk (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/) /*!< TPI DEVID: NrTraceInput Mask */ - -/* TPI DEVTYPE Register Definitions */ -#define TPI_DEVTYPE_MajorType_Pos 4U /*!< TPI DEVTYPE: MajorType Position */ -#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */ - -#define TPI_DEVTYPE_SubType_Pos 0U /*!< TPI DEVTYPE: SubType Position */ -#define TPI_DEVTYPE_SubType_Msk (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/) /*!< TPI DEVTYPE: SubType Mask */ - -/*@}*/ /* end of group CMSIS_TPI */ - - -#if (__MPU_PRESENT == 1U) -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_MPU Memory Protection Unit (MPU) - \brief Type definitions for the Memory Protection Unit (MPU) - @{ - */ - -/** - \brief Structure type to access the Memory Protection Unit (MPU). - */ -typedef struct -{ - __IM uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */ - __IOM uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */ - __IOM uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */ - __IOM uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */ - __IOM uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */ - __IOM uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */ - __IOM uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */ - __IOM uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */ - __IOM uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */ - __IOM uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */ -} MPU_Type; - -/* MPU Type Register Definitions */ -#define MPU_TYPE_IREGION_Pos 16U /*!< MPU TYPE: IREGION Position */ -#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ - -#define MPU_TYPE_DREGION_Pos 8U /*!< MPU TYPE: DREGION Position */ -#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ - -#define MPU_TYPE_SEPARATE_Pos 0U /*!< MPU TYPE: SEPARATE Position */ -#define MPU_TYPE_SEPARATE_Msk (1UL /*<< MPU_TYPE_SEPARATE_Pos*/) /*!< MPU TYPE: SEPARATE Mask */ - -/* MPU Control Register Definitions */ -#define MPU_CTRL_PRIVDEFENA_Pos 2U /*!< MPU CTRL: PRIVDEFENA Position */ -#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ - -#define MPU_CTRL_HFNMIENA_Pos 1U /*!< MPU CTRL: HFNMIENA Position */ -#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ - -#define MPU_CTRL_ENABLE_Pos 0U /*!< MPU CTRL: ENABLE Position */ -#define MPU_CTRL_ENABLE_Msk (1UL /*<< MPU_CTRL_ENABLE_Pos*/) /*!< MPU CTRL: ENABLE Mask */ - -/* MPU Region Number Register Definitions */ -#define MPU_RNR_REGION_Pos 0U /*!< MPU RNR: REGION Position */ -#define MPU_RNR_REGION_Msk (0xFFUL /*<< MPU_RNR_REGION_Pos*/) /*!< MPU RNR: REGION Mask */ - -/* MPU Region Base Address Register Definitions */ -#define MPU_RBAR_ADDR_Pos 5U /*!< MPU RBAR: ADDR Position */ -#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ - -#define MPU_RBAR_VALID_Pos 4U /*!< MPU RBAR: VALID Position */ -#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ - -#define MPU_RBAR_REGION_Pos 0U /*!< MPU RBAR: REGION Position */ -#define MPU_RBAR_REGION_Msk (0xFUL /*<< MPU_RBAR_REGION_Pos*/) /*!< MPU RBAR: REGION Mask */ - -/* MPU Region Attribute and Size Register Definitions */ -#define MPU_RASR_ATTRS_Pos 16U /*!< MPU RASR: MPU Region Attribute field Position */ -#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */ - -#define MPU_RASR_XN_Pos 28U /*!< MPU RASR: ATTRS.XN Position */ -#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */ - -#define MPU_RASR_AP_Pos 24U /*!< MPU RASR: ATTRS.AP Position */ -#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */ - -#define MPU_RASR_TEX_Pos 19U /*!< MPU RASR: ATTRS.TEX Position */ -#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */ - -#define MPU_RASR_S_Pos 18U /*!< MPU RASR: ATTRS.S Position */ -#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */ - -#define MPU_RASR_C_Pos 17U /*!< MPU RASR: ATTRS.C Position */ -#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */ - -#define MPU_RASR_B_Pos 16U /*!< MPU RASR: ATTRS.B Position */ -#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */ - -#define MPU_RASR_SRD_Pos 8U /*!< MPU RASR: Sub-Region Disable Position */ -#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ - -#define MPU_RASR_SIZE_Pos 1U /*!< MPU RASR: Region Size Field Position */ -#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ - -#define MPU_RASR_ENABLE_Pos 0U /*!< MPU RASR: Region enable bit Position */ -#define MPU_RASR_ENABLE_Msk (1UL /*<< MPU_RASR_ENABLE_Pos*/) /*!< MPU RASR: Region enable bit Disable Mask */ - -/*@} end of group CMSIS_MPU */ -#endif - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug) - \brief Type definitions for the Core Debug Registers - @{ - */ - -/** - \brief Structure type to access the Core Debug Register (CoreDebug). - */ -typedef struct -{ - __IOM uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */ - __OM uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */ - __IOM uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */ - __IOM uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */ -} CoreDebug_Type; - -/* Debug Halting Control and Status Register Definitions */ -#define CoreDebug_DHCSR_DBGKEY_Pos 16U /*!< CoreDebug DHCSR: DBGKEY Position */ -#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ - -#define CoreDebug_DHCSR_S_RESET_ST_Pos 25U /*!< CoreDebug DHCSR: S_RESET_ST Position */ -#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ - -#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24U /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ -#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ - -#define CoreDebug_DHCSR_S_LOCKUP_Pos 19U /*!< CoreDebug DHCSR: S_LOCKUP Position */ -#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ - -#define CoreDebug_DHCSR_S_SLEEP_Pos 18U /*!< CoreDebug DHCSR: S_SLEEP Position */ -#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ - -#define CoreDebug_DHCSR_S_HALT_Pos 17U /*!< CoreDebug DHCSR: S_HALT Position */ -#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ - -#define CoreDebug_DHCSR_S_REGRDY_Pos 16U /*!< CoreDebug DHCSR: S_REGRDY Position */ -#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ - -#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5U /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ -#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ - -#define CoreDebug_DHCSR_C_MASKINTS_Pos 3U /*!< CoreDebug DHCSR: C_MASKINTS Position */ -#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ - -#define CoreDebug_DHCSR_C_STEP_Pos 2U /*!< CoreDebug DHCSR: C_STEP Position */ -#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ - -#define CoreDebug_DHCSR_C_HALT_Pos 1U /*!< CoreDebug DHCSR: C_HALT Position */ -#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ - -#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0U /*!< CoreDebug DHCSR: C_DEBUGEN Position */ -#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ - -/* Debug Core Register Selector Register Definitions */ -#define CoreDebug_DCRSR_REGWnR_Pos 16U /*!< CoreDebug DCRSR: REGWnR Position */ -#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ - -#define CoreDebug_DCRSR_REGSEL_Pos 0U /*!< CoreDebug DCRSR: REGSEL Position */ -#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/) /*!< CoreDebug DCRSR: REGSEL Mask */ - -/* Debug Exception and Monitor Control Register Definitions */ -#define CoreDebug_DEMCR_TRCENA_Pos 24U /*!< CoreDebug DEMCR: TRCENA Position */ -#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ - -#define CoreDebug_DEMCR_MON_REQ_Pos 19U /*!< CoreDebug DEMCR: MON_REQ Position */ -#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ - -#define CoreDebug_DEMCR_MON_STEP_Pos 18U /*!< CoreDebug DEMCR: MON_STEP Position */ -#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ - -#define CoreDebug_DEMCR_MON_PEND_Pos 17U /*!< CoreDebug DEMCR: MON_PEND Position */ -#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ - -#define CoreDebug_DEMCR_MON_EN_Pos 16U /*!< CoreDebug DEMCR: MON_EN Position */ -#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ - -#define CoreDebug_DEMCR_VC_HARDERR_Pos 10U /*!< CoreDebug DEMCR: VC_HARDERR Position */ -#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ - -#define CoreDebug_DEMCR_VC_INTERR_Pos 9U /*!< CoreDebug DEMCR: VC_INTERR Position */ -#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ - -#define CoreDebug_DEMCR_VC_BUSERR_Pos 8U /*!< CoreDebug DEMCR: VC_BUSERR Position */ -#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ - -#define CoreDebug_DEMCR_VC_STATERR_Pos 7U /*!< CoreDebug DEMCR: VC_STATERR Position */ -#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ - -#define CoreDebug_DEMCR_VC_CHKERR_Pos 6U /*!< CoreDebug DEMCR: VC_CHKERR Position */ -#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ - -#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5U /*!< CoreDebug DEMCR: VC_NOCPERR Position */ -#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ - -#define CoreDebug_DEMCR_VC_MMERR_Pos 4U /*!< CoreDebug DEMCR: VC_MMERR Position */ -#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ - -#define CoreDebug_DEMCR_VC_CORERESET_Pos 0U /*!< CoreDebug DEMCR: VC_CORERESET Position */ -#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ - -/*@} end of group CMSIS_CoreDebug */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_bitfield Core register bit field macros - \brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk). - @{ - */ - -/** - \brief Mask and shift a bit field value for use in a register bit range. - \param[in] field Name of the register bit field. - \param[in] value Value of the bit field. - \return Masked and shifted value. -*/ -#define _VAL2FLD(field, value) ((value << field ## _Pos) & field ## _Msk) - -/** - \brief Mask and shift a register value to extract a bit filed value. - \param[in] field Name of the register bit field. - \param[in] value Value of register. - \return Masked and shifted bit field value. -*/ -#define _FLD2VAL(field, value) ((value & field ## _Msk) >> field ## _Pos) - -/*@} end of group CMSIS_core_bitfield */ - - -/** - \ingroup CMSIS_core_register - \defgroup CMSIS_core_base Core Definitions - \brief Definitions for base addresses, unions, and structures. - @{ - */ - -/* Memory mapping of Cortex-M3 Hardware */ -#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */ -#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */ -#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */ -#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */ -#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */ - -#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */ -#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */ -#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */ -#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */ -#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */ -#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ - -#if (__MPU_PRESENT == 1U) - #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */ -#endif - -/*@} */ - - - -/******************************************************************************* - * Hardware Abstraction Layer - Core Function Interface contains: - - Core NVIC Functions - - Core SysTick Functions - - Core Debug Functions - - Core Register Access Functions - ******************************************************************************/ -/** - \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference -*/ - - - -/* ########################## NVIC functions #################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_NVICFunctions NVIC Functions - \brief Functions that manage interrupts and exceptions via the NVIC. - @{ - */ - -/** - \brief Set Priority Grouping - \details Sets the priority grouping field using the required unlock sequence. - The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field. - Only values from 0..7 are used. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Priority grouping field. - */ -__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk)); /* clear bits to change */ - reg_value = (reg_value | - ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (PriorityGroupTmp << 8U) ); /* Insert write key and priorty group */ - SCB->AIRCR = reg_value; -} - - -/** - \brief Get Priority Grouping - \details Reads the priority grouping field from the NVIC Interrupt Controller. - \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field). - */ -__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void) -{ - return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos)); -} - - -/** - \brief Enable External Interrupt - \details Enables a device-specific interrupt in the NVIC interrupt controller. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) -{ - NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Disable External Interrupt - \details Disables a device-specific interrupt in the NVIC interrupt controller. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) -{ - NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Get Pending Interrupt - \details Reads the pending register in the NVIC and returns the pending bit for the specified interrupt. - \param [in] IRQn Interrupt number. - \return 0 Interrupt status is not pending. - \return 1 Interrupt status is pending. - */ -__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); -} - - -/** - \brief Set Pending Interrupt - \details Sets the pending bit of an external interrupt. - \param [in] IRQn Interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Clear Pending Interrupt - \details Clears the pending bit of an external interrupt. - \param [in] IRQn External interrupt number. Value cannot be negative. - */ -__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL)); -} - - -/** - \brief Get Active Interrupt - \details Reads the active register in NVIC and returns the active bit. - \param [in] IRQn Interrupt number. - \return 0 Interrupt status is not active. - \return 1 Interrupt status is active. - */ -__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) -{ - return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL)); -} - - -/** - \brief Set Interrupt Priority - \details Sets the priority of an interrupt. - \note The priority cannot be set for every core interrupt. - \param [in] IRQn Interrupt number. - \param [in] priority Priority to set. - */ -__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if ((int32_t)(IRQn) < 0) - { - SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } - else - { - NVIC->IP[((uint32_t)(int32_t)IRQn)] = (uint8_t)((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL); - } -} - - -/** - \brief Get Interrupt Priority - \details Reads the priority of an interrupt. - The interrupt number can be positive to specify an external (device specific) interrupt, - or negative to specify an internal (core) interrupt. - \param [in] IRQn Interrupt number. - \return Interrupt Priority. - Value is aligned automatically to the implemented priority bits of the microcontroller. - */ -__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) -{ - - if ((int32_t)(IRQn) < 0) - { - return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8U - __NVIC_PRIO_BITS))); - } - else - { - return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)] >> (8U - __NVIC_PRIO_BITS))); - } -} - - -/** - \brief Encode Priority - \details Encodes the priority for an interrupt with the given priority group, - preemptive priority value, and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set. - \param [in] PriorityGroup Used priority group. - \param [in] PreemptPriority Preemptive priority value (starting from 0). - \param [in] SubPriority Subpriority value (starting from 0). - \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority(). - */ -__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - return ( - ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) | - ((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL))) - ); -} - - -/** - \brief Decode Priority - \details Decodes an interrupt priority value with a given priority group to - preemptive priority value and subpriority value. - In case of a conflict between priority grouping and available - priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority(). - \param [in] PriorityGroup Used priority group. - \param [out] pPreemptPriority Preemptive priority value (starting from 0). - \param [out] pSubPriority Subpriority value (starting from 0). - */ -__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp); - SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS)); - - *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL); - *pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL); -} - - -/** - \brief System Reset - \details Initiates a system reset request to reset the MCU. - */ -__STATIC_INLINE void NVIC_SystemReset(void) -{ - __DSB(); /* Ensure all outstanding memory accesses included - buffered write are completed before reset */ - SCB->AIRCR = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) | - (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | - SCB_AIRCR_SYSRESETREQ_Msk ); /* Keep priority group unchanged */ - __DSB(); /* Ensure completion of memory access */ - - for(;;) /* wait until reset */ - { - __NOP(); - } -} - -/*@} end of CMSIS_Core_NVICFunctions */ - - - -/* ################################## SysTick function ############################################ */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_Core_SysTickFunctions SysTick Functions - \brief Functions that configure the System. - @{ - */ - -#if (__Vendor_SysTickConfig == 0U) - -/** - \brief System Tick Configuration - \details Initializes the System Timer and its interrupt, and starts the System Tick Timer. - Counter is in free running mode to generate periodic interrupts. - \param [in] ticks Number of ticks between two interrupts. - \return 0 Function succeeded. - \return 1 Function failed. - \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the - function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b> - must contain a vendor-specific implementation of this function. - */ -__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) - { - return (1UL); /* Reload value impossible */ - } - - SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */ - SysTick->VAL = 0UL; /* Load the SysTick Counter Value */ - SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | - SysTick_CTRL_TICKINT_Msk | - SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ - return (0UL); /* Function successful */ -} - -#endif - -/*@} end of CMSIS_Core_SysTickFunctions */ - - - -/* ##################################### Debug In/Output function ########################################### */ -/** - \ingroup CMSIS_Core_FunctionInterface - \defgroup CMSIS_core_DebugFunctions ITM Functions - \brief Functions that access the ITM debug interface. - @{ - */ - -extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */ -#define ITM_RXBUFFER_EMPTY 0x5AA55AA5U /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */ - - -/** - \brief ITM Send Character - \details Transmits a character via the ITM channel 0, and - \li Just returns when no debugger is connected that has booked the output. - \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted. - \param [in] ch Character to transmit. - \returns Character to transmit. - */ -__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch) -{ - if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) && /* ITM enabled */ - ((ITM->TER & 1UL ) != 0UL) ) /* ITM Port #0 enabled */ - { - while (ITM->PORT[0U].u32 == 0UL) - { - __NOP(); - } - ITM->PORT[0U].u8 = (uint8_t)ch; - } - return (ch); -} - - -/** - \brief ITM Receive Character - \details Inputs a character via the external variable \ref ITM_RxBuffer. - \return Received character. - \return -1 No character pending. - */ -__STATIC_INLINE int32_t ITM_ReceiveChar (void) -{ - int32_t ch = -1; /* no character available */ - - if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) - { - ch = ITM_RxBuffer; - ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ - } - - return (ch); -} - - -/** - \brief ITM Check Character - \details Checks whether a character is pending for reading in the variable \ref ITM_RxBuffer. - \return 0 No character available. - \return 1 Character available. - */ -__STATIC_INLINE int32_t ITM_CheckChar (void) -{ - - if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) - { - return (0); /* no character available */ - } - else - { - return (1); /* character available */ - } -} - -/*@} end of CMSIS_core_DebugFunctions */ - - - - -#ifdef __cplusplus -} -#endif - -#endif /* __CORE_SC300_H_DEPENDANT */ - -#endif /* __CMSIS_GENERIC */ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h deleted file mode 100644 index ef1a2bb..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h +++ /dev/null @@ -1,3123 +0,0 @@ -/** - ****************************************************************************** - * @file stm32_hal_legacy.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief This file contains aliases definition for the STM32Cube HAL constants - * macros and functions maintained for legacy purpose. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32_HAL_LEGACY -#define __STM32_HAL_LEGACY - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose - * @{ - */ -#define AES_FLAG_RDERR CRYP_FLAG_RDERR -#define AES_FLAG_WRERR CRYP_FLAG_WRERR -#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF -#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR -#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR - -/** - * @} - */ - -/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose - * @{ - */ -#define ADC_RESOLUTION12b ADC_RESOLUTION_12B -#define ADC_RESOLUTION10b ADC_RESOLUTION_10B -#define ADC_RESOLUTION8b ADC_RESOLUTION_8B -#define ADC_RESOLUTION6b ADC_RESOLUTION_6B -#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN -#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED -#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV -#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV -#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV -#define REGULAR_GROUP ADC_REGULAR_GROUP -#define INJECTED_GROUP ADC_INJECTED_GROUP -#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP -#define AWD_EVENT ADC_AWD_EVENT -#define AWD1_EVENT ADC_AWD1_EVENT -#define AWD2_EVENT ADC_AWD2_EVENT -#define AWD3_EVENT ADC_AWD3_EVENT -#define OVR_EVENT ADC_OVR_EVENT -#define JQOVF_EVENT ADC_JQOVF_EVENT -#define ALL_CHANNELS ADC_ALL_CHANNELS -#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS -#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS -#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR -#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT -#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 -#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 -#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 -#define ADC_CLOCKPRESCALER_PCLK_DIV6 ADC_CLOCK_SYNC_PCLK_DIV6 -#define ADC_CLOCKPRESCALER_PCLK_DIV8 ADC_CLOCK_SYNC_PCLK_DIV8 -#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO -#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2 -#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO -#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4 -#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO -#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11 -#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1 -#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE -#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING -#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING -#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING -#define ADC_SAMPLETIME_2CYCLE_5 ADC_SAMPLETIME_2CYCLES_5 - -#define HAL_ADC_STATE_BUSY_REG HAL_ADC_STATE_REG_BUSY -#define HAL_ADC_STATE_BUSY_INJ HAL_ADC_STATE_INJ_BUSY -#define HAL_ADC_STATE_EOC_REG HAL_ADC_STATE_REG_EOC -#define HAL_ADC_STATE_EOC_INJ HAL_ADC_STATE_INJ_EOC -#define HAL_ADC_STATE_ERROR HAL_ADC_STATE_ERROR_INTERNAL -#define HAL_ADC_STATE_BUSY HAL_ADC_STATE_BUSY_INTERNAL -#define HAL_ADC_STATE_AWD HAL_ADC_STATE_AWD1 -/** - * @} - */ - -/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose - * @{ - */ - -#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG - -/** - * @} - */ - -/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose - * @{ - */ -#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE -#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE -#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1 -#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2 -#define COMP_EXTI_LINE_COMP3_EVENT COMP_EXTI_LINE_COMP3 -#define COMP_EXTI_LINE_COMP4_EVENT COMP_EXTI_LINE_COMP4 -#define COMP_EXTI_LINE_COMP5_EVENT COMP_EXTI_LINE_COMP5 -#define COMP_EXTI_LINE_COMP6_EVENT COMP_EXTI_LINE_COMP6 -#define COMP_EXTI_LINE_COMP7_EVENT COMP_EXTI_LINE_COMP7 -#define COMP_OUTPUT_COMP6TIM2OCREFCLR COMP_OUTPUT_COMP6_TIM2OCREFCLR -#if defined(STM32F373xC) || defined(STM32F378xx) -#define COMP_OUTPUT_TIM3IC1 COMP_OUTPUT_COMP1_TIM3IC1 -#define COMP_OUTPUT_TIM3OCREFCLR COMP_OUTPUT_COMP1_TIM3OCREFCLR -#endif /* STM32F373xC || STM32F378xx */ - -#if defined(STM32L0) || defined(STM32L4) -#define COMP_WINDOWMODE_ENABLE COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON - -#define COMP_NONINVERTINGINPUT_IO1 COMP_INPUT_PLUS_IO1 -#define COMP_NONINVERTINGINPUT_IO2 COMP_INPUT_PLUS_IO2 -#define COMP_NONINVERTINGINPUT_IO3 COMP_INPUT_PLUS_IO3 - -#define COMP_INVERTINGINPUT_1_4VREFINT COMP_INPUT_MINUS_1_4VREFINT -#define COMP_INVERTINGINPUT_1_2VREFINT COMP_INPUT_MINUS_1_2VREFINT -#define COMP_INVERTINGINPUT_3_4VREFINT COMP_INPUT_MINUS_3_4VREFINT -#define COMP_INVERTINGINPUT_VREFINT COMP_INPUT_MINUS_VREFINT -#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_INPUT_MINUS_DAC1_CH1 -#define COMP_INVERTINGINPUT_DAC1_CH2 COMP_INPUT_MINUS_DAC1_CH2 -#define COMP_INVERTINGINPUT_DAC1 COMP_INPUT_MINUS_DAC1_CH1 -#define COMP_INVERTINGINPUT_DAC2 COMP_INPUT_MINUS_DAC1_CH2 -#define COMP_INVERTINGINPUT_IO1 COMP_INPUT_MINUS_IO1 -#define COMP_INVERTINGINPUT_IO2 COMP_INPUT_MINUS_IO2 -#define COMP_INVERTINGINPUT_IO3 COMP_INPUT_MINUS_IO3 -#define COMP_INVERTINGINPUT_IO4 COMP_INPUT_MINUS_IO4 -#define COMP_INVERTINGINPUT_IO5 COMP_INPUT_MINUS_IO5 - -#define COMP_OUTPUTLEVEL_LOW COMP_OUTPUT_LEVEL_LOW -#define COMP_OUTPUTLEVEL_HIGH COMP_OUTPUT_LEVEL_HIGH - -/* Note: Literal "COMP_FLAG_LOCK" kept for legacy purpose. */ -/* To check COMP lock state, use macro "__HAL_COMP_IS_LOCKED()". */ -#if defined(COMP_CSR_LOCK) -#define COMP_FLAG_LOCK COMP_CSR_LOCK -#elif defined(COMP_CSR_COMP1LOCK) -#define COMP_FLAG_LOCK COMP_CSR_COMP1LOCK -#elif defined(COMP_CSR_COMPxLOCK) -#define COMP_FLAG_LOCK COMP_CSR_COMPxLOCK -#endif - -#if defined(STM32L4) -#define COMP_BLANKINGSRCE_TIM1OC5 COMP_BLANKINGSRC_TIM1_OC5_COMP1 -#define COMP_BLANKINGSRCE_TIM2OC3 COMP_BLANKINGSRC_TIM2_OC3_COMP1 -#define COMP_BLANKINGSRCE_TIM3OC3 COMP_BLANKINGSRC_TIM3_OC3_COMP1 -#define COMP_BLANKINGSRCE_TIM3OC4 COMP_BLANKINGSRC_TIM3_OC4_COMP2 -#define COMP_BLANKINGSRCE_TIM8OC5 COMP_BLANKINGSRC_TIM8_OC5_COMP2 -#define COMP_BLANKINGSRCE_TIM15OC1 COMP_BLANKINGSRC_TIM15_OC1_COMP2 -#define COMP_BLANKINGSRCE_NONE COMP_BLANKINGSRC_NONE -#endif - -#if defined(STM32L0) -#define COMP_MODE_HIGHSPEED COMP_POWERMODE_MEDIUMSPEED -#define COMP_MODE_LOWSPEED COMP_POWERMODE_ULTRALOWPOWER -#else -#define COMP_MODE_HIGHSPEED COMP_POWERMODE_HIGHSPEED -#define COMP_MODE_MEDIUMSPEED COMP_POWERMODE_MEDIUMSPEED -#define COMP_MODE_LOWPOWER COMP_POWERMODE_LOWPOWER -#define COMP_MODE_ULTRALOWPOWER COMP_POWERMODE_ULTRALOWPOWER -#endif - -#endif -/** - * @} - */ - -/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose - * @{ - */ -#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig -/** - * @} - */ - -/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose - * @{ - */ - -#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE -#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE - -/** - * @} - */ - -/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose - * @{ - */ - -#define DAC1_CHANNEL_1 DAC_CHANNEL_1 -#define DAC1_CHANNEL_2 DAC_CHANNEL_2 -#define DAC2_CHANNEL_1 DAC_CHANNEL_1 -#define DAC_WAVE_NONE ((uint32_t)0x00000000U) -#define DAC_WAVE_NOISE ((uint32_t)DAC_CR_WAVE1_0) -#define DAC_WAVE_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1) -#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE -#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE -#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE - -/** - * @} - */ - -/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose - * @{ - */ -#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2 -#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4 -#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5 -#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4 -#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2 -#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 -#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6 -#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7 -#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67 -#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67 -#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32 -#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76 -#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6 -#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7 -#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6 - -#define IS_HAL_REMAPDMA IS_DMA_REMAP -#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE -#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE - - - -/** - * @} - */ - -/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose - * @{ - */ - -#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE -#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD -#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD -#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD -#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS -#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES -#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES -#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE -#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE -#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE -#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE -#define OBEX_PCROP OPTIONBYTE_PCROP -#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG -#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE -#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE -#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE -#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD -#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD -#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE -#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD -#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD -#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE -#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD -#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD -#define PAGESIZE FLASH_PAGE_SIZE -#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE -#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD -#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD -#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1 -#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2 -#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3 -#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4 -#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST -#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST -#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA -#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB -#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA -#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB -#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE -#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN -#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE -#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN -#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE -#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD -#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG -#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS -#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP -#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV -#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR -#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG -#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION -#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA -#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE -#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE -#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS -#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS -#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST -#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR -#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO -#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION -#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS -#define OB_WDG_SW OB_IWDG_SW -#define OB_WDG_HW OB_IWDG_HW -#define OB_SDADC12_VDD_MONITOR_SET OB_SDACD_VDD_MONITOR_SET -#define OB_SDADC12_VDD_MONITOR_RESET OB_SDACD_VDD_MONITOR_RESET -#define OB_RAM_PARITY_CHECK_SET OB_SRAM_PARITY_SET -#define OB_RAM_PARITY_CHECK_RESET OB_SRAM_PARITY_RESET -#define IS_OB_SDADC12_VDD_MONITOR IS_OB_SDACD_VDD_MONITOR -#define OB_RDP_LEVEL0 OB_RDP_LEVEL_0 -#define OB_RDP_LEVEL1 OB_RDP_LEVEL_1 -#define OB_RDP_LEVEL2 OB_RDP_LEVEL_2 -/** - * @} - */ - -/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose - * @{ - */ - -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 I2C_FASTMODEPLUS_PA9 -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 I2C_FASTMODEPLUS_PA10 -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6 -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7 -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8 -#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9 -#define HAL_SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1 -#define HAL_SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2 -#define HAL_SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3 -/** - * @} - */ - - -/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose - * @{ - */ -#if defined(STM32L4) || defined(STM32F7) -#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE -#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE -#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8 -#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16 -#else -#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE -#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE -#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8 -#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16 -#endif -/** - * @} - */ - -/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose - * @{ - */ - -#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef -#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef -/** - * @} - */ - -/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose - * @{ - */ -#define GET_GPIO_SOURCE GPIO_GET_INDEX -#define GET_GPIO_INDEX GPIO_GET_INDEX - -#if defined(STM32F4) -#define GPIO_AF12_SDMMC GPIO_AF12_SDIO -#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO -#endif - -#if defined(STM32F7) -#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 -#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 -#endif - -#if defined(STM32L4) -#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1 -#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1 -#endif - -#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1 -#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1 -#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1 - -#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7) -#define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW -#define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM -#define GPIO_SPEED_FAST GPIO_SPEED_FREQ_HIGH -#define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH -#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 */ - -#if defined(STM32L1) - #define GPIO_SPEED_VERY_LOW GPIO_SPEED_FREQ_LOW - #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_MEDIUM - #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_HIGH - #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_VERY_HIGH -#endif /* STM32L1 */ - -#if defined(STM32F0) || defined(STM32F3) || defined(STM32F1) - #define GPIO_SPEED_LOW GPIO_SPEED_FREQ_LOW - #define GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM - #define GPIO_SPEED_HIGH GPIO_SPEED_FREQ_HIGH -#endif /* STM32F0 || STM32F3 || STM32F1 */ - -#define GPIO_AF6_DFSDM GPIO_AF6_DFSDM1 -/** - * @} - */ - -/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose - * @{ - */ -#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6 -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6 -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6 -#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6 -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7 -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7 -#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7 -#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7 - -#define __HAL_HRTIM_SetCounter __HAL_HRTIM_SETCOUNTER -#define __HAL_HRTIM_GetCounter __HAL_HRTIM_GETCOUNTER -#define __HAL_HRTIM_SetPeriod __HAL_HRTIM_SETPERIOD -#define __HAL_HRTIM_GetPeriod __HAL_HRTIM_GETPERIOD -#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER -#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER -#define __HAL_HRTIM_SetCompare __HAL_HRTIM_SETCOMPARE -#define __HAL_HRTIM_GetCompare __HAL_HRTIM_GETCOMPARE -/** - * @} - */ - -/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose - * @{ - */ -#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE -#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE -#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE -#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE -#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE -#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE -#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE -#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE -#if defined(STM32F0) || defined(STM32F1) || defined(STM32F3) || defined(STM32G0) || defined(STM32L4) || defined(STM32L1) || defined(STM32F7) -#define HAL_I2C_STATE_MEM_BUSY_TX HAL_I2C_STATE_BUSY_TX -#define HAL_I2C_STATE_MEM_BUSY_RX HAL_I2C_STATE_BUSY_RX -#define HAL_I2C_STATE_MASTER_BUSY_TX HAL_I2C_STATE_BUSY_TX -#define HAL_I2C_STATE_MASTER_BUSY_RX HAL_I2C_STATE_BUSY_RX -#define HAL_I2C_STATE_SLAVE_BUSY_TX HAL_I2C_STATE_BUSY_TX -#define HAL_I2C_STATE_SLAVE_BUSY_RX HAL_I2C_STATE_BUSY_RX -#endif -/** - * @} - */ - -/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose - * @{ - */ -#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE -#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE - -/** - * @} - */ - -/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose - * @{ - */ -#define KR_KEY_RELOAD IWDG_KEY_RELOAD -#define KR_KEY_ENABLE IWDG_KEY_ENABLE -#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE -#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE -/** - * @} - */ - -/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose - * @{ - */ - -#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION -#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS -#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS -#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS - -#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING -#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING -#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING - -#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION -#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS -#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS -#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS - -/* The following 3 definition have also been present in a temporary version of lptim.h */ -/* They need to be renamed also to the right name, just in case */ -#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS -#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS -#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS - -/** - * @} - */ - -/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose - * @{ - */ -#define HAL_NAND_Read_Page HAL_NAND_Read_Page_8b -#define HAL_NAND_Write_Page HAL_NAND_Write_Page_8b -#define HAL_NAND_Read_SpareArea HAL_NAND_Read_SpareArea_8b -#define HAL_NAND_Write_SpareArea HAL_NAND_Write_SpareArea_8b - -#define NAND_AddressTypedef NAND_AddressTypeDef - -#define __ARRAY_ADDRESS ARRAY_ADDRESS -#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE -#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE -#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE -#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE -/** - * @} - */ - -/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose - * @{ - */ -#define NOR_StatusTypedef HAL_NOR_StatusTypeDef -#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS -#define NOR_ONGOING HAL_NOR_STATUS_ONGOING -#define NOR_ERROR HAL_NOR_STATUS_ERROR -#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT - -#define __NOR_WRITE NOR_WRITE -#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT -/** - * @} - */ - -/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose - * @{ - */ - -#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0 -#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1 -#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2 -#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3 - -#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0 -#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1 -#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2 -#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3 - -#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 -#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 - -#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0 -#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1 - -#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0 -#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1 - -#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1 - -#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO -#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 -#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 - -/** - * @} - */ - -/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose - * @{ - */ -#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS -#if defined(STM32F7) - #define I2S_CLOCK_SYSCLK I2S_CLOCK_PLL -#endif -/** - * @} - */ - -/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose - * @{ - */ - -/* Compact Flash-ATA registers description */ -#define CF_DATA ATA_DATA -#define CF_SECTOR_COUNT ATA_SECTOR_COUNT -#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER -#define CF_CYLINDER_LOW ATA_CYLINDER_LOW -#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH -#define CF_CARD_HEAD ATA_CARD_HEAD -#define CF_STATUS_CMD ATA_STATUS_CMD -#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE -#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA - -/* Compact Flash-ATA commands */ -#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD -#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD -#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD -#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD - -#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef -#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS -#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING -#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR -#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT -/** - * @} - */ - -/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose - * @{ - */ - -#define FORMAT_BIN RTC_FORMAT_BIN -#define FORMAT_BCD RTC_FORMAT_BCD - -#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE -#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE -#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE -#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE -#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE - -#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE -#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE -#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE -#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE -#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE -#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE -#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT -#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT - -#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT -#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 -#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1 -#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2 - -#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE -#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1 -#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1 - -#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT -#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1 -#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1 - -/** - * @} - */ - - -/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose - * @{ - */ -#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE -#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE - -#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE -#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE -#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE -#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE - -#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE -#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE - -#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE -#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE -/** - * @} - */ - - -/** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose - * @{ - */ -#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE -#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE -#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE -#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE -#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE -#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE -#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE -#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE -#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE -#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE -#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN -/** - * @} - */ - -/** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose - * @{ - */ -#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE -#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE - -#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE -#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE - -#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE -#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE - -/** - * @} - */ - -/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose - * @{ - */ -#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK -#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK - -#define TIM_DMABase_CR1 TIM_DMABASE_CR1 -#define TIM_DMABase_CR2 TIM_DMABASE_CR2 -#define TIM_DMABase_SMCR TIM_DMABASE_SMCR -#define TIM_DMABase_DIER TIM_DMABASE_DIER -#define TIM_DMABase_SR TIM_DMABASE_SR -#define TIM_DMABase_EGR TIM_DMABASE_EGR -#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1 -#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2 -#define TIM_DMABase_CCER TIM_DMABASE_CCER -#define TIM_DMABase_CNT TIM_DMABASE_CNT -#define TIM_DMABase_PSC TIM_DMABASE_PSC -#define TIM_DMABase_ARR TIM_DMABASE_ARR -#define TIM_DMABase_RCR TIM_DMABASE_RCR -#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1 -#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2 -#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3 -#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4 -#define TIM_DMABase_BDTR TIM_DMABASE_BDTR -#define TIM_DMABase_DCR TIM_DMABASE_DCR -#define TIM_DMABase_DMAR TIM_DMABASE_DMAR -#define TIM_DMABase_OR1 TIM_DMABASE_OR1 -#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3 -#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5 -#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6 -#define TIM_DMABase_OR2 TIM_DMABASE_OR2 -#define TIM_DMABase_OR3 TIM_DMABASE_OR3 -#define TIM_DMABase_OR TIM_DMABASE_OR - -#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE -#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1 -#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2 -#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3 -#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4 -#define TIM_EventSource_COM TIM_EVENTSOURCE_COM -#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER -#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK -#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2 - -#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER -#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS -#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS -#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS -#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS -#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS -#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS -#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS -#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS -#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS -#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS -#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS -#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS -#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS -#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS -#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS -#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS -#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS - -/** - * @} - */ - -/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose - * @{ - */ -#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING -#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING -/** - * @} - */ - -/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose - * @{ - */ -#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE -#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE -#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE -#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE - -#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE -#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE - -#define __DIV_SAMPLING16 UART_DIV_SAMPLING16 -#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16 -#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16 -#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16 - -#define __DIV_SAMPLING8 UART_DIV_SAMPLING8 -#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8 -#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8 -#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8 - -#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE -#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK - -/** - * @} - */ - - -/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose - * @{ - */ - -#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE -#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE - -#define USARTNACK_ENABLED USART_NACK_ENABLE -#define USARTNACK_DISABLED USART_NACK_DISABLE -/** - * @} - */ - -/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose - * @{ - */ -#define CFR_BASE WWDG_CFR_BASE - -/** - * @} - */ - -/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose - * @{ - */ -#define CAN_FilterFIFO0 CAN_FILTER_FIFO0 -#define CAN_FilterFIFO1 CAN_FILTER_FIFO1 -#define CAN_IT_RQCP0 CAN_IT_TME -#define CAN_IT_RQCP1 CAN_IT_TME -#define CAN_IT_RQCP2 CAN_IT_TME -#define INAK_TIMEOUT CAN_TIMEOUT_VALUE -#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE -#define CAN_TXSTATUS_FAILED ((uint8_t)0x00U) -#define CAN_TXSTATUS_OK ((uint8_t)0x01U) -#define CAN_TXSTATUS_PENDING ((uint8_t)0x02U) - -/** - * @} - */ - -/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose - * @{ - */ - -#define VLAN_TAG ETH_VLAN_TAG -#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD -#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD -#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD -#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK -#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK -#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK -#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK - -#define ETH_MMCCR ((uint32_t)0x00000100U) -#define ETH_MMCRIR ((uint32_t)0x00000104U) -#define ETH_MMCTIR ((uint32_t)0x00000108U) -#define ETH_MMCRIMR ((uint32_t)0x0000010CU) -#define ETH_MMCTIMR ((uint32_t)0x00000110U) -#define ETH_MMCTGFSCCR ((uint32_t)0x0000014CU) -#define ETH_MMCTGFMSCCR ((uint32_t)0x00000150U) -#define ETH_MMCTGFCR ((uint32_t)0x00000168U) -#define ETH_MMCRFCECR ((uint32_t)0x00000194U) -#define ETH_MMCRFAECR ((uint32_t)0x00000198U) -#define ETH_MMCRGUFCR ((uint32_t)0x000001C4U) - -#define ETH_MAC_TXFIFO_FULL ((uint32_t)0x02000000) /* Tx FIFO full */ -#define ETH_MAC_TXFIFONOT_EMPTY ((uint32_t)0x01000000) /* Tx FIFO not empty */ -#define ETH_MAC_TXFIFO_WRITE_ACTIVE ((uint32_t)0x00400000) /* Tx FIFO write active */ -#define ETH_MAC_TXFIFO_IDLE ((uint32_t)0x00000000) /* Tx FIFO read status: Idle */ -#define ETH_MAC_TXFIFO_READ ((uint32_t)0x00100000) /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */ -#define ETH_MAC_TXFIFO_WAITING ((uint32_t)0x00200000) /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */ -#define ETH_MAC_TXFIFO_WRITING ((uint32_t)0x00300000) /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */ -#define ETH_MAC_TRANSMISSION_PAUSE ((uint32_t)0x00080000) /* MAC transmitter in pause */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE ((uint32_t)0x00000000) /* MAC transmit frame controller: Idle */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING ((uint32_t)0x00020000) /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF ((uint32_t)0x00040000) /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING ((uint32_t)0x00060000) /* MAC transmit frame controller: Transferring input frame for transmission */ -#define ETH_MAC_MII_TRANSMIT_ACTIVE ((uint32_t)0x00010000) /* MAC MII transmit engine active */ -#define ETH_MAC_RXFIFO_EMPTY ((uint32_t)0x00000000) /* Rx FIFO fill level: empty */ -#define ETH_MAC_RXFIFO_BELOW_THRESHOLD ((uint32_t)0x00000100) /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */ -#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD ((uint32_t)0x00000200) /* Rx FIFO fill level: fill-level above flow-control activate threshold */ -#define ETH_MAC_RXFIFO_FULL ((uint32_t)0x00000300) /* Rx FIFO fill level: full */ -#if defined(STM32F1) -#else -#define ETH_MAC_READCONTROLLER_IDLE ((uint32_t)0x00000000) /* Rx FIFO read controller IDLE state */ -#define ETH_MAC_READCONTROLLER_READING_DATA ((uint32_t)0x00000020) /* Rx FIFO read controller Reading frame data */ -#define ETH_MAC_READCONTROLLER_READING_STATUS ((uint32_t)0x00000040) /* Rx FIFO read controller Reading frame status (or time-stamp) */ -#endif -#define ETH_MAC_READCONTROLLER_FLUSHING ((uint32_t)0x00000060) /* Rx FIFO read controller Flushing the frame data and status */ -#define ETH_MAC_RXFIFO_WRITE_ACTIVE ((uint32_t)0x00000010) /* Rx FIFO write controller active */ -#define ETH_MAC_SMALL_FIFO_NOTACTIVE ((uint32_t)0x00000000) /* MAC small FIFO read / write controllers not active */ -#define ETH_MAC_SMALL_FIFO_READ_ACTIVE ((uint32_t)0x00000002) /* MAC small FIFO read controller active */ -#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE ((uint32_t)0x00000004) /* MAC small FIFO write controller active */ -#define ETH_MAC_SMALL_FIFO_RW_ACTIVE ((uint32_t)0x00000006) /* MAC small FIFO read / write controllers active */ -#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE ((uint32_t)0x00000001) /* MAC MII receive protocol engine active */ - -/** - * @} - */ - -/** @defgroup HAL_DCMI_Aliased_Defines HAL DCMI Aliased Defines maintained for legacy purpose - * @{ - */ -#define HAL_DCMI_ERROR_OVF HAL_DCMI_ERROR_OVR -#define DCMI_IT_OVF DCMI_IT_OVR -#define DCMI_FLAG_OVFRI DCMI_FLAG_OVRRI -#define DCMI_FLAG_OVFMI DCMI_FLAG_OVRMI - -#define HAL_DCMI_ConfigCROP HAL_DCMI_ConfigCrop -#define HAL_DCMI_EnableCROP HAL_DCMI_EnableCrop -#define HAL_DCMI_DisableCROP HAL_DCMI_DisableCrop - -/** - * @} - */ - -#if defined(STM32L4xx) || defined(STM32F7) || defined(STM32F427xx) || defined(STM32F437xx) ||\ - defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F469xx) || defined(STM32F479xx) -/** @defgroup HAL_DMA2D_Aliased_Defines HAL DMA2D Aliased Defines maintained for legacy purpose - * @{ - */ -#define DMA2D_ARGB8888 DMA2D_OUTPUT_ARGB8888 -#define DMA2D_RGB888 DMA2D_OUTPUT_RGB888 -#define DMA2D_RGB565 DMA2D_OUTPUT_RGB565 -#define DMA2D_ARGB1555 DMA2D_OUTPUT_ARGB1555 -#define DMA2D_ARGB4444 DMA2D_OUTPUT_ARGB4444 - -#define CM_ARGB8888 DMA2D_INPUT_ARGB8888 -#define CM_RGB888 DMA2D_INPUT_RGB888 -#define CM_RGB565 DMA2D_INPUT_RGB565 -#define CM_ARGB1555 DMA2D_INPUT_ARGB1555 -#define CM_ARGB4444 DMA2D_INPUT_ARGB4444 -#define CM_L8 DMA2D_INPUT_L8 -#define CM_AL44 DMA2D_INPUT_AL44 -#define CM_AL88 DMA2D_INPUT_AL88 -#define CM_L4 DMA2D_INPUT_L4 -#define CM_A8 DMA2D_INPUT_A8 -#define CM_A4 DMA2D_INPUT_A4 -/** - * @} - */ -#endif /* STM32L4xx || STM32F7*/ - -/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose - * @{ - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback -/** - * @} - */ - -/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_HASH_STATETypeDef HAL_HASH_StateTypeDef -#define HAL_HASHPhaseTypeDef HAL_HASH_PhaseTypeDef -#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish -#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish -#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish -#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish - -/*HASH Algorithm Selection*/ - -#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1 -#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224 -#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256 -#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5 - -#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH -#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC - -#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY -#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY -/** - * @} - */ - -/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode -#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode -#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode -#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode -#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode -#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode -#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph)) -#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect -#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT()) -#if defined(STM32L0) -#else -#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT()) -#endif -#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT()) -#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor()) -/** - * @} - */ - -/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose - * @{ - */ -#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram -#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown -#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown -#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock -#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock -#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase -#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program - - /** - * @} - */ - -/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter -#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter -#define HAL_FMPI2CEx_AnalogFilter_Config HAL_FMPI2CEx_ConfigAnalogFilter -#define HAL_FMPI2CEx_DigitalFilter_Config HAL_FMPI2CEx_ConfigDigitalFilter - -#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus)) - /** - * @} - */ - -/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose - * @{ - */ -#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD -#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg -#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown -#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor -#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg -#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown -#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor -#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler -#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD -#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler -#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback -#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive -#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive -#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC -#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC -#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM - -#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL -#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING -#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING -#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING -#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING -#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING -#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING - -#define CR_OFFSET_BB PWR_CR_OFFSET_BB -#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB - -#define DBP_BitNumber DBP_BIT_NUMBER -#define PVDE_BitNumber PVDE_BIT_NUMBER -#define PMODE_BitNumber PMODE_BIT_NUMBER -#define EWUP_BitNumber EWUP_BIT_NUMBER -#define FPDS_BitNumber FPDS_BIT_NUMBER -#define ODEN_BitNumber ODEN_BIT_NUMBER -#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER -#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER -#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER -#define BRE_BitNumber BRE_BIT_NUMBER - -#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL - - /** - * @} - */ - -/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT -#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback -#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback -/** - * @} - */ - -/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo -/** - * @} - */ - -/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt -#define HAL_TIM_DMAError TIM_DMAError -#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt -#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt -/** - * @} - */ - -/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback -/** - * @} - */ - -/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback -/** - * @} - */ - - -/** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose - * @{ - */ - -/** - * @} - */ - -/* Exported macros ------------------------------------------------------------*/ - -/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose - * @{ - */ -#define AES_IT_CC CRYP_IT_CC -#define AES_IT_ERR CRYP_IT_ERR -#define AES_FLAG_CCF CRYP_FLAG_CCF -/** - * @} - */ - -/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE -#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH -#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH -#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM -#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC -#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM -#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC -#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI -#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK -#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG -#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG -#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE -#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE - -#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY -#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48 -#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS -#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER -#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER - -/** - * @} - */ - - -/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose - * @{ - */ -#define __ADC_ENABLE __HAL_ADC_ENABLE -#define __ADC_DISABLE __HAL_ADC_DISABLE -#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS -#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS -#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE -#define __ADC_IS_ENABLED ADC_IS_ENABLE -#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR -#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED -#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED -#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR -#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED -#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING -#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE - -#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION -#define __HAL_ADC_JSQR_RK ADC_JSQR_RK -#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT -#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR -#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION -#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE -#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS -#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS -#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM -#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT -#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS -#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN -#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ -#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET -#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET -#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL -#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL -#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET -#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET -#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD - -#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION -#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION -#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION -#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER -#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI -#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE -#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE -#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER -#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER -#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE - -#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT -#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT -#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL -#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM -#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET -#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE -#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE -#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER - -#define __HAL_ADC_SQR1 ADC_SQR1 -#define __HAL_ADC_SMPR1 ADC_SMPR1 -#define __HAL_ADC_SMPR2 ADC_SMPR2 -#define __HAL_ADC_SQR3_RK ADC_SQR3_RK -#define __HAL_ADC_SQR2_RK ADC_SQR2_RK -#define __HAL_ADC_SQR1_RK ADC_SQR1_RK -#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS -#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS -#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV -#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection -#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq -#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION -#define __HAL_ADC_JSQR ADC_JSQR - -#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL -#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS -#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF -#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT -#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS -#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN -#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR -#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ - -/** - * @} - */ - -/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT -#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT -#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT -#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE - -/** - * @} - */ - -/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1 -#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1 -#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2 -#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2 -#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3 -#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3 -#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4 -#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4 -#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5 -#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5 -#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6 -#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6 -#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7 -#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7 -#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8 -#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8 - -#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9 -#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9 -#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10 -#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10 -#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11 -#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11 -#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12 -#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12 -#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13 -#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13 -#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14 -#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14 -#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2 -#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2 - - -#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15 -#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15 -#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16 -#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16 -#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17 -#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17 -#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC -#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC -#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG -#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG -#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG -#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG -#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT -#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT -#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT -#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT -#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT -#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT -#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1 -#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1 -#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1 -#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1 -#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2 -#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2 - -/** - * @} - */ - -/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose - * @{ - */ -#if defined(STM32F3) -#define COMP_START __HAL_COMP_ENABLE -#define COMP_STOP __HAL_COMP_DISABLE -#define COMP_LOCK __HAL_COMP_LOCK - -#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) -#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_IT()) -#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_IT()) -#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ - __HAL_COMP_COMP6_EXTI_GET_FLAG()) -#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ - __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) -# endif -# if defined(STM32F302xE) || defined(STM32F302xC) -#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ - __HAL_COMP_COMP6_EXTI_ENABLE_IT()) -#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ - __HAL_COMP_COMP6_EXTI_DISABLE_IT()) -#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ - __HAL_COMP_COMP6_EXTI_GET_FLAG()) -#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ - __HAL_COMP_COMP6_EXTI_CLEAR_FLAG()) -# endif -# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx) -#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \ - __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \ - __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \ - __HAL_COMP_COMP7_EXTI_ENABLE_IT()) -#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \ - ((__EXTILINE__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \ - __HAL_COMP_COMP7_EXTI_DISABLE_IT()) -#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \ - __HAL_COMP_COMP7_EXTI_GET_FLAG()) -#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \ - ((__FLAG__) == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \ - __HAL_COMP_COMP7_EXTI_CLEAR_FLAG()) -# endif -# if defined(STM32F373xC) ||defined(STM32F378xx) -#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_IT()) -#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_IT()) -#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ - __HAL_COMP_COMP2_EXTI_GET_FLAG()) -#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ - __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) -# endif -#else -#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE()) -#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \ - __HAL_COMP_COMP2_EXTI_ENABLE_IT()) -#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \ - __HAL_COMP_COMP2_EXTI_DISABLE_IT()) -#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \ - __HAL_COMP_COMP2_EXTI_GET_FLAG()) -#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \ - __HAL_COMP_COMP2_EXTI_CLEAR_FLAG()) -#endif - -#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE - -#if defined(STM32L0) || defined(STM32L4) -/* Note: On these STM32 families, the only argument of this macro */ -/* is COMP_FLAG_LOCK. */ -/* This macro is replaced by __HAL_COMP_IS_LOCKED with only HAL handle */ -/* argument. */ -#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_COMP_IS_LOCKED(__HANDLE__)) -#endif -/** - * @} - */ - -#if defined(STM32L0) || defined(STM32L4) -/** @defgroup HAL_COMP_Aliased_Functions HAL COMP Aliased Functions maintained for legacy purpose - * @{ - */ -#define HAL_COMP_Start_IT HAL_COMP_Start /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ -#define HAL_COMP_Stop_IT HAL_COMP_Stop /* Function considered as legacy as EXTI event or IT configuration is done into HAL_COMP_Init() */ -/** - * @} - */ -#endif - -/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose - * @{ - */ - -#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \ - ((WAVE) == DAC_WAVE_NOISE)|| \ - ((WAVE) == DAC_WAVE_TRIANGLE)) - -/** - * @} - */ - -/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose - * @{ - */ - -#define IS_WRPAREA IS_OB_WRPAREA -#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM -#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM -#define IS_TYPEERASE IS_FLASH_TYPEERASE -#define IS_NBSECTORS IS_FLASH_NBSECTORS -#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE - -/** - * @} - */ - -/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2 -#define __HAL_I2C_GENERATE_START I2C_GENERATE_START -#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE -#define __HAL_I2C_RISE_TIME I2C_RISE_TIME -#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD -#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST -#define __HAL_I2C_SPEED I2C_SPEED -#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE -#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ -#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS -#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE -#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ -#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB -#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB -#define __HAL_I2C_FREQRANGE I2C_FREQRANGE -/** - * @} - */ - -/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose - * @{ - */ - -#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE -#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT - -/** - * @} - */ - -/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __IRDA_DISABLE __HAL_IRDA_DISABLE -#define __IRDA_ENABLE __HAL_IRDA_ENABLE - -#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE -#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION -#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE -#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION - -#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE - - -/** - * @} - */ - - -/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS -#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS -/** - * @} - */ - - -/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT -#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT -#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE - -/** - * @} - */ - - -/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose - * @{ - */ -#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD -#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX -#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX -#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX -#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX -#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L -#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H -#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM -#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES -#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX -#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT -#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION -#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET - -/** - * @} - */ - - -/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT -#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT -#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE -#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE -#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE -#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE -#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE -#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE -#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE -#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE -#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE -#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE -#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine -#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine -#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig -#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig -#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0) -#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT -#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT -#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE -#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE -#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE -#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE -#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE -#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE -#define __HAL_PWR_PVM_DISABLE() do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0) -#define __HAL_PWR_PVM_ENABLE() do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0) -#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention -#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention -#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2 -#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2 -#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE -#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE -#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB -#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB - -#if defined (STM32F4) -#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT() -#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT() -#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG() -#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG() -#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT() -#else -#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG -#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT -#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT -#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT -#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG -#endif /* STM32F4 */ -/** - * @} - */ - - -/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose - * @{ - */ - -#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI -#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI - -#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback -#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT()) - -#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE -#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE -#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE -#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE -#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET -#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET -#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE -#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE -#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET -#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET -#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE -#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE -#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE -#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE -#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET -#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET -#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE -#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE -#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET -#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET -#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE -#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE -#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE -#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE -#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET -#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET -#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE -#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE -#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE -#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE -#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET -#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET -#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE -#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE -#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET -#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET -#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET -#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET -#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET -#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET -#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET -#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET -#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET -#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET -#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET -#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET -#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET -#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET -#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE -#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE -#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET -#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET -#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE -#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE -#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE -#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE -#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET -#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET -#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE -#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE -#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET -#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET -#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE -#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE -#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET -#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET -#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE -#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE -#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE -#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE -#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET -#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET -#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE -#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE -#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET -#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET -#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE -#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE -#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE -#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE -#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET -#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET -#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE -#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE -#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET -#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET -#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE -#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE -#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE -#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE -#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET -#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET -#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE -#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE -#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET -#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET -#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE -#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE -#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE -#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE -#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET -#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET -#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE -#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE -#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE -#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE -#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET -#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET -#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE -#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE -#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE -#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE -#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET -#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET -#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE -#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE -#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET -#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET -#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE -#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE -#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE -#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE -#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE -#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE -#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE -#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE -#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE -#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE -#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET -#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET -#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE -#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE -#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET -#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET -#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE -#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE -#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE -#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE -#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE -#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE -#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET -#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET -#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE -#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE -#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE -#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE -#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE -#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE -#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET -#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET -#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE -#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE -#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE -#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE -#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET -#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET -#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE -#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE -#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE -#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE -#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET -#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET -#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE -#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE -#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE -#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE -#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET -#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET -#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE -#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE -#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE -#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE -#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET -#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET -#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE -#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE -#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE -#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE -#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET -#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET -#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE -#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE -#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE -#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE -#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET -#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET -#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE -#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE -#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE -#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE -#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET -#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET -#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE -#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE -#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE -#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE -#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET -#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET -#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE -#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE -#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE -#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE -#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET -#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET -#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE -#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE -#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE -#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE -#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET -#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET -#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE -#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE -#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE -#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE -#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET -#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET -#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE -#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE -#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE -#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE -#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET -#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET -#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE -#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE -#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE -#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE -#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET -#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET -#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE -#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE -#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE -#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE -#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET -#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET -#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE -#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE -#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE -#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE -#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET -#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET -#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE -#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE -#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE -#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE -#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET -#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET -#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE -#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE -#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE -#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE -#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET -#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET -#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE -#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE -#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE -#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE -#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET -#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET -#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE -#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE -#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE -#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE -#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET -#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET -#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE -#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE -#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE -#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE -#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET -#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET -#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE -#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE -#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE -#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE -#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET -#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET -#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE -#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE -#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE -#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE -#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE -#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE -#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET -#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET -#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE -#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE -#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE -#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE -#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET -#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET -#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE -#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE -#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE -#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE -#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET -#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET -#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE -#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE -#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE -#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE -#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET -#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET -#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE -#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE -#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE -#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE -#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE -#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE -#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE -#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE -#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE -#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE -#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET -#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET -#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE -#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE -#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE -#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE -#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET -#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET -#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE -#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE -#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE -#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE -#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET -#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET -#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE -#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE -#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET -#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET -#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE -#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE -#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET -#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET -#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE -#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE -#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET -#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET -#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE -#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE -#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET -#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET -#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE -#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE -#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET -#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET -#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE -#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE -#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE -#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE -#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET -#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET -#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE -#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE -#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE -#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE -#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET -#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET -#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE -#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE -#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE -#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE -#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET -#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET -#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE -#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE -#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE -#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE -#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET -#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET -#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE -#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE -#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE -#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE -#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET -#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET -#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE -#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE -#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE -#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE -#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET -#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET -#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE -#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE -#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE -#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE -#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET -#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET -#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE -#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE -#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE -#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE -#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET -#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET -#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE -#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE -#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE -#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE -#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET -#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET -#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE -#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE -#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE -#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE -#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET -#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET -#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE -#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE -#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET -#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET -#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE -#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE -#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE -#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE -#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET -#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET -#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE -#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE -#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE -#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE -#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET -#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET -#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE -#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE -#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE -#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE -#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET -#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET -#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE -#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE -#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE -#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE -#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET -#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET -#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE -#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE -#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE -#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE -#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET -#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET -#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE -#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE -#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE -#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE -#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET -#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET -#define __USART4_CLK_DISABLE __HAL_RCC_USART4_CLK_DISABLE -#define __USART4_CLK_ENABLE __HAL_RCC_USART4_CLK_ENABLE -#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_USART4_CLK_SLEEP_ENABLE -#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_USART4_CLK_SLEEP_DISABLE -#define __USART4_FORCE_RESET __HAL_RCC_USART4_FORCE_RESET -#define __USART4_RELEASE_RESET __HAL_RCC_USART4_RELEASE_RESET -#define __USART5_CLK_DISABLE __HAL_RCC_USART5_CLK_DISABLE -#define __USART5_CLK_ENABLE __HAL_RCC_USART5_CLK_ENABLE -#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_USART5_CLK_SLEEP_ENABLE -#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_USART5_CLK_SLEEP_DISABLE -#define __USART5_FORCE_RESET __HAL_RCC_USART5_FORCE_RESET -#define __USART5_RELEASE_RESET __HAL_RCC_USART5_RELEASE_RESET -#define __USART7_CLK_DISABLE __HAL_RCC_USART7_CLK_DISABLE -#define __USART7_CLK_ENABLE __HAL_RCC_USART7_CLK_ENABLE -#define __USART7_FORCE_RESET __HAL_RCC_USART7_FORCE_RESET -#define __USART7_RELEASE_RESET __HAL_RCC_USART7_RELEASE_RESET -#define __USART8_CLK_DISABLE __HAL_RCC_USART8_CLK_DISABLE -#define __USART8_CLK_ENABLE __HAL_RCC_USART8_CLK_ENABLE -#define __USART8_FORCE_RESET __HAL_RCC_USART8_FORCE_RESET -#define __USART8_RELEASE_RESET __HAL_RCC_USART8_RELEASE_RESET -#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE -#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE -#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET -#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE -#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE -#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE -#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE -#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET -#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE -#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE -#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE -#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE -#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET -#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET -#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE -#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE -#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET -#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET -#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE -#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE -#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE -#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE -#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET -#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET -#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE -#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE -#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE -#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE -#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE -#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE -#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET -#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET -#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE -#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE - -#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET -#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET -#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE -#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE -#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE -#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE -#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE -#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE -#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE -#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE -#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE -#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE -#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE -#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE -#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE -#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE -#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE -#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE -#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE -#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET -#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET -#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE -#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE -#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE -#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE -#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE -#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET -#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET -#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE -#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE -#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE -#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE -#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET -#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET -#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE -#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE -#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE -#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE -#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET -#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET -#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE -#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE -#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE -#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE -#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE -#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE -#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE -#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE -#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE -#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE -#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE -#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE -#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE -#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE -#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE -#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE -#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE -#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE -#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE -#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE -#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE -#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET -#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET -#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE -#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE -#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE -#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE -#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET -#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET -#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE -#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE -#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE -#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE -#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET -#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET -#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE -#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE -#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE -#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE -#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET -#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET -#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE -#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE -#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE -#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE -#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET -#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE -#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE -#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE -#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE -#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE -#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE -#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET -#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET -#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE -#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE -#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE -#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE -#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET -#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET -#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE -#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE -#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE -#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE -#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET -#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET -#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE -#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE -#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE -#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE -#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET -#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET -#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE -#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE -#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE -#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE -#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED -#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED -#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET -#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET -#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE -#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE -#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED -#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED -#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET -#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE -#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE -#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE -#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE -#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE -#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE -#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE -#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE -#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE -#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET -#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET -#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE -#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE -#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET -#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET -#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE -#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE -#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE -#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE -#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET -#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET -#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE -#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE - -/* alias define maintained for legacy */ -#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET -#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET - -#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE -#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE -#define __ADC34_CLK_ENABLE __HAL_RCC_ADC34_CLK_ENABLE -#define __ADC34_CLK_DISABLE __HAL_RCC_ADC34_CLK_DISABLE -#define __ADC12_CLK_ENABLE __HAL_RCC_ADC12_CLK_ENABLE -#define __ADC12_CLK_DISABLE __HAL_RCC_ADC12_CLK_DISABLE -#define __DAC2_CLK_ENABLE __HAL_RCC_DAC2_CLK_ENABLE -#define __DAC2_CLK_DISABLE __HAL_RCC_DAC2_CLK_DISABLE -#define __TIM18_CLK_ENABLE __HAL_RCC_TIM18_CLK_ENABLE -#define __TIM18_CLK_DISABLE __HAL_RCC_TIM18_CLK_DISABLE -#define __TIM19_CLK_ENABLE __HAL_RCC_TIM19_CLK_ENABLE -#define __TIM19_CLK_DISABLE __HAL_RCC_TIM19_CLK_DISABLE -#define __TIM20_CLK_ENABLE __HAL_RCC_TIM20_CLK_ENABLE -#define __TIM20_CLK_DISABLE __HAL_RCC_TIM20_CLK_DISABLE -#define __HRTIM1_CLK_ENABLE __HAL_RCC_HRTIM1_CLK_ENABLE -#define __HRTIM1_CLK_DISABLE __HAL_RCC_HRTIM1_CLK_DISABLE -#define __SDADC1_CLK_ENABLE __HAL_RCC_SDADC1_CLK_ENABLE -#define __SDADC2_CLK_ENABLE __HAL_RCC_SDADC2_CLK_ENABLE -#define __SDADC3_CLK_ENABLE __HAL_RCC_SDADC3_CLK_ENABLE -#define __SDADC1_CLK_DISABLE __HAL_RCC_SDADC1_CLK_DISABLE -#define __SDADC2_CLK_DISABLE __HAL_RCC_SDADC2_CLK_DISABLE -#define __SDADC3_CLK_DISABLE __HAL_RCC_SDADC3_CLK_DISABLE - -#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET -#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET -#define __ADC34_FORCE_RESET __HAL_RCC_ADC34_FORCE_RESET -#define __ADC34_RELEASE_RESET __HAL_RCC_ADC34_RELEASE_RESET -#define __ADC12_FORCE_RESET __HAL_RCC_ADC12_FORCE_RESET -#define __ADC12_RELEASE_RESET __HAL_RCC_ADC12_RELEASE_RESET -#define __DAC2_FORCE_RESET __HAL_RCC_DAC2_FORCE_RESET -#define __DAC2_RELEASE_RESET __HAL_RCC_DAC2_RELEASE_RESET -#define __TIM18_FORCE_RESET __HAL_RCC_TIM18_FORCE_RESET -#define __TIM18_RELEASE_RESET __HAL_RCC_TIM18_RELEASE_RESET -#define __TIM19_FORCE_RESET __HAL_RCC_TIM19_FORCE_RESET -#define __TIM19_RELEASE_RESET __HAL_RCC_TIM19_RELEASE_RESET -#define __TIM20_FORCE_RESET __HAL_RCC_TIM20_FORCE_RESET -#define __TIM20_RELEASE_RESET __HAL_RCC_TIM20_RELEASE_RESET -#define __HRTIM1_FORCE_RESET __HAL_RCC_HRTIM1_FORCE_RESET -#define __HRTIM1_RELEASE_RESET __HAL_RCC_HRTIM1_RELEASE_RESET -#define __SDADC1_FORCE_RESET __HAL_RCC_SDADC1_FORCE_RESET -#define __SDADC2_FORCE_RESET __HAL_RCC_SDADC2_FORCE_RESET -#define __SDADC3_FORCE_RESET __HAL_RCC_SDADC3_FORCE_RESET -#define __SDADC1_RELEASE_RESET __HAL_RCC_SDADC1_RELEASE_RESET -#define __SDADC2_RELEASE_RESET __HAL_RCC_SDADC2_RELEASE_RESET -#define __SDADC3_RELEASE_RESET __HAL_RCC_SDADC3_RELEASE_RESET - -#define __ADC1_IS_CLK_ENABLED __HAL_RCC_ADC1_IS_CLK_ENABLED -#define __ADC1_IS_CLK_DISABLED __HAL_RCC_ADC1_IS_CLK_DISABLED -#define __ADC12_IS_CLK_ENABLED __HAL_RCC_ADC12_IS_CLK_ENABLED -#define __ADC12_IS_CLK_DISABLED __HAL_RCC_ADC12_IS_CLK_DISABLED -#define __ADC34_IS_CLK_ENABLED __HAL_RCC_ADC34_IS_CLK_ENABLED -#define __ADC34_IS_CLK_DISABLED __HAL_RCC_ADC34_IS_CLK_DISABLED -#define __CEC_IS_CLK_ENABLED __HAL_RCC_CEC_IS_CLK_ENABLED -#define __CEC_IS_CLK_DISABLED __HAL_RCC_CEC_IS_CLK_DISABLED -#define __CRC_IS_CLK_ENABLED __HAL_RCC_CRC_IS_CLK_ENABLED -#define __CRC_IS_CLK_DISABLED __HAL_RCC_CRC_IS_CLK_DISABLED -#define __DAC1_IS_CLK_ENABLED __HAL_RCC_DAC1_IS_CLK_ENABLED -#define __DAC1_IS_CLK_DISABLED __HAL_RCC_DAC1_IS_CLK_DISABLED -#define __DAC2_IS_CLK_ENABLED __HAL_RCC_DAC2_IS_CLK_ENABLED -#define __DAC2_IS_CLK_DISABLED __HAL_RCC_DAC2_IS_CLK_DISABLED -#define __DMA1_IS_CLK_ENABLED __HAL_RCC_DMA1_IS_CLK_ENABLED -#define __DMA1_IS_CLK_DISABLED __HAL_RCC_DMA1_IS_CLK_DISABLED -#define __DMA2_IS_CLK_ENABLED __HAL_RCC_DMA2_IS_CLK_ENABLED -#define __DMA2_IS_CLK_DISABLED __HAL_RCC_DMA2_IS_CLK_DISABLED -#define __FLITF_IS_CLK_ENABLED __HAL_RCC_FLITF_IS_CLK_ENABLED -#define __FLITF_IS_CLK_DISABLED __HAL_RCC_FLITF_IS_CLK_DISABLED -#define __FMC_IS_CLK_ENABLED __HAL_RCC_FMC_IS_CLK_ENABLED -#define __FMC_IS_CLK_DISABLED __HAL_RCC_FMC_IS_CLK_DISABLED -#define __GPIOA_IS_CLK_ENABLED __HAL_RCC_GPIOA_IS_CLK_ENABLED -#define __GPIOA_IS_CLK_DISABLED __HAL_RCC_GPIOA_IS_CLK_DISABLED -#define __GPIOB_IS_CLK_ENABLED __HAL_RCC_GPIOB_IS_CLK_ENABLED -#define __GPIOB_IS_CLK_DISABLED __HAL_RCC_GPIOB_IS_CLK_DISABLED -#define __GPIOC_IS_CLK_ENABLED __HAL_RCC_GPIOC_IS_CLK_ENABLED -#define __GPIOC_IS_CLK_DISABLED __HAL_RCC_GPIOC_IS_CLK_DISABLED -#define __GPIOD_IS_CLK_ENABLED __HAL_RCC_GPIOD_IS_CLK_ENABLED -#define __GPIOD_IS_CLK_DISABLED __HAL_RCC_GPIOD_IS_CLK_DISABLED -#define __GPIOE_IS_CLK_ENABLED __HAL_RCC_GPIOE_IS_CLK_ENABLED -#define __GPIOE_IS_CLK_DISABLED __HAL_RCC_GPIOE_IS_CLK_DISABLED -#define __GPIOF_IS_CLK_ENABLED __HAL_RCC_GPIOF_IS_CLK_ENABLED -#define __GPIOF_IS_CLK_DISABLED __HAL_RCC_GPIOF_IS_CLK_DISABLED -#define __GPIOG_IS_CLK_ENABLED __HAL_RCC_GPIOG_IS_CLK_ENABLED -#define __GPIOG_IS_CLK_DISABLED __HAL_RCC_GPIOG_IS_CLK_DISABLED -#define __GPIOH_IS_CLK_ENABLED __HAL_RCC_GPIOH_IS_CLK_ENABLED -#define __GPIOH_IS_CLK_DISABLED __HAL_RCC_GPIOH_IS_CLK_DISABLED -#define __HRTIM1_IS_CLK_ENABLED __HAL_RCC_HRTIM1_IS_CLK_ENABLED -#define __HRTIM1_IS_CLK_DISABLED __HAL_RCC_HRTIM1_IS_CLK_DISABLED -#define __I2C1_IS_CLK_ENABLED __HAL_RCC_I2C1_IS_CLK_ENABLED -#define __I2C1_IS_CLK_DISABLED __HAL_RCC_I2C1_IS_CLK_DISABLED -#define __I2C2_IS_CLK_ENABLED __HAL_RCC_I2C2_IS_CLK_ENABLED -#define __I2C2_IS_CLK_DISABLED __HAL_RCC_I2C2_IS_CLK_DISABLED -#define __I2C3_IS_CLK_ENABLED __HAL_RCC_I2C3_IS_CLK_ENABLED -#define __I2C3_IS_CLK_DISABLED __HAL_RCC_I2C3_IS_CLK_DISABLED -#define __PWR_IS_CLK_ENABLED __HAL_RCC_PWR_IS_CLK_ENABLED -#define __PWR_IS_CLK_DISABLED __HAL_RCC_PWR_IS_CLK_DISABLED -#define __SYSCFG_IS_CLK_ENABLED __HAL_RCC_SYSCFG_IS_CLK_ENABLED -#define __SYSCFG_IS_CLK_DISABLED __HAL_RCC_SYSCFG_IS_CLK_DISABLED -#define __SPI1_IS_CLK_ENABLED __HAL_RCC_SPI1_IS_CLK_ENABLED -#define __SPI1_IS_CLK_DISABLED __HAL_RCC_SPI1_IS_CLK_DISABLED -#define __SPI2_IS_CLK_ENABLED __HAL_RCC_SPI2_IS_CLK_ENABLED -#define __SPI2_IS_CLK_DISABLED __HAL_RCC_SPI2_IS_CLK_DISABLED -#define __SPI3_IS_CLK_ENABLED __HAL_RCC_SPI3_IS_CLK_ENABLED -#define __SPI3_IS_CLK_DISABLED __HAL_RCC_SPI3_IS_CLK_DISABLED -#define __SPI4_IS_CLK_ENABLED __HAL_RCC_SPI4_IS_CLK_ENABLED -#define __SPI4_IS_CLK_DISABLED __HAL_RCC_SPI4_IS_CLK_DISABLED -#define __SDADC1_IS_CLK_ENABLED __HAL_RCC_SDADC1_IS_CLK_ENABLED -#define __SDADC1_IS_CLK_DISABLED __HAL_RCC_SDADC1_IS_CLK_DISABLED -#define __SDADC2_IS_CLK_ENABLED __HAL_RCC_SDADC2_IS_CLK_ENABLED -#define __SDADC2_IS_CLK_DISABLED __HAL_RCC_SDADC2_IS_CLK_DISABLED -#define __SDADC3_IS_CLK_ENABLED __HAL_RCC_SDADC3_IS_CLK_ENABLED -#define __SDADC3_IS_CLK_DISABLED __HAL_RCC_SDADC3_IS_CLK_DISABLED -#define __SRAM_IS_CLK_ENABLED __HAL_RCC_SRAM_IS_CLK_ENABLED -#define __SRAM_IS_CLK_DISABLED __HAL_RCC_SRAM_IS_CLK_DISABLED -#define __TIM1_IS_CLK_ENABLED __HAL_RCC_TIM1_IS_CLK_ENABLED -#define __TIM1_IS_CLK_DISABLED __HAL_RCC_TIM1_IS_CLK_DISABLED -#define __TIM2_IS_CLK_ENABLED __HAL_RCC_TIM2_IS_CLK_ENABLED -#define __TIM2_IS_CLK_DISABLED __HAL_RCC_TIM2_IS_CLK_DISABLED -#define __TIM3_IS_CLK_ENABLED __HAL_RCC_TIM3_IS_CLK_ENABLED -#define __TIM3_IS_CLK_DISABLED __HAL_RCC_TIM3_IS_CLK_DISABLED -#define __TIM4_IS_CLK_ENABLED __HAL_RCC_TIM4_IS_CLK_ENABLED -#define __TIM4_IS_CLK_DISABLED __HAL_RCC_TIM4_IS_CLK_DISABLED -#define __TIM5_IS_CLK_ENABLED __HAL_RCC_TIM5_IS_CLK_ENABLED -#define __TIM5_IS_CLK_DISABLED __HAL_RCC_TIM5_IS_CLK_DISABLED -#define __TIM6_IS_CLK_ENABLED __HAL_RCC_TIM6_IS_CLK_ENABLED -#define __TIM6_IS_CLK_DISABLED __HAL_RCC_TIM6_IS_CLK_DISABLED -#define __TIM7_IS_CLK_ENABLED __HAL_RCC_TIM7_IS_CLK_ENABLED -#define __TIM7_IS_CLK_DISABLED __HAL_RCC_TIM7_IS_CLK_DISABLED -#define __TIM8_IS_CLK_ENABLED __HAL_RCC_TIM8_IS_CLK_ENABLED -#define __TIM8_IS_CLK_DISABLED __HAL_RCC_TIM8_IS_CLK_DISABLED -#define __TIM12_IS_CLK_ENABLED __HAL_RCC_TIM12_IS_CLK_ENABLED -#define __TIM12_IS_CLK_DISABLED __HAL_RCC_TIM12_IS_CLK_DISABLED -#define __TIM13_IS_CLK_ENABLED __HAL_RCC_TIM13_IS_CLK_ENABLED -#define __TIM13_IS_CLK_DISABLED __HAL_RCC_TIM13_IS_CLK_DISABLED -#define __TIM14_IS_CLK_ENABLED __HAL_RCC_TIM14_IS_CLK_ENABLED -#define __TIM14_IS_CLK_DISABLED __HAL_RCC_TIM14_IS_CLK_DISABLED -#define __TIM15_IS_CLK_ENABLED __HAL_RCC_TIM15_IS_CLK_ENABLED -#define __TIM15_IS_CLK_DISABLED __HAL_RCC_TIM15_IS_CLK_DISABLED -#define __TIM16_IS_CLK_ENABLED __HAL_RCC_TIM16_IS_CLK_ENABLED -#define __TIM16_IS_CLK_DISABLED __HAL_RCC_TIM16_IS_CLK_DISABLED -#define __TIM17_IS_CLK_ENABLED __HAL_RCC_TIM17_IS_CLK_ENABLED -#define __TIM17_IS_CLK_DISABLED __HAL_RCC_TIM17_IS_CLK_DISABLED -#define __TIM18_IS_CLK_ENABLED __HAL_RCC_TIM18_IS_CLK_ENABLED -#define __TIM18_IS_CLK_DISABLED __HAL_RCC_TIM18_IS_CLK_DISABLED -#define __TIM19_IS_CLK_ENABLED __HAL_RCC_TIM19_IS_CLK_ENABLED -#define __TIM19_IS_CLK_DISABLED __HAL_RCC_TIM19_IS_CLK_DISABLED -#define __TIM20_IS_CLK_ENABLED __HAL_RCC_TIM20_IS_CLK_ENABLED -#define __TIM20_IS_CLK_DISABLED __HAL_RCC_TIM20_IS_CLK_DISABLED -#define __TSC_IS_CLK_ENABLED __HAL_RCC_TSC_IS_CLK_ENABLED -#define __TSC_IS_CLK_DISABLED __HAL_RCC_TSC_IS_CLK_DISABLED -#define __UART4_IS_CLK_ENABLED __HAL_RCC_UART4_IS_CLK_ENABLED -#define __UART4_IS_CLK_DISABLED __HAL_RCC_UART4_IS_CLK_DISABLED -#define __UART5_IS_CLK_ENABLED __HAL_RCC_UART5_IS_CLK_ENABLED -#define __UART5_IS_CLK_DISABLED __HAL_RCC_UART5_IS_CLK_DISABLED -#define __USART1_IS_CLK_ENABLED __HAL_RCC_USART1_IS_CLK_ENABLED -#define __USART1_IS_CLK_DISABLED __HAL_RCC_USART1_IS_CLK_DISABLED -#define __USART2_IS_CLK_ENABLED __HAL_RCC_USART2_IS_CLK_ENABLED -#define __USART2_IS_CLK_DISABLED __HAL_RCC_USART2_IS_CLK_DISABLED -#define __USART3_IS_CLK_ENABLED __HAL_RCC_USART3_IS_CLK_ENABLED -#define __USART3_IS_CLK_DISABLED __HAL_RCC_USART3_IS_CLK_DISABLED -#define __USB_IS_CLK_ENABLED __HAL_RCC_USB_IS_CLK_ENABLED -#define __USB_IS_CLK_DISABLED __HAL_RCC_USB_IS_CLK_DISABLED -#define __WWDG_IS_CLK_ENABLED __HAL_RCC_WWDG_IS_CLK_ENABLED -#define __WWDG_IS_CLK_DISABLED __HAL_RCC_WWDG_IS_CLK_DISABLED - -#if defined(STM32F4) -#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET -#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET -#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE -#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE -#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE -#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE -#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED __HAL_RCC_SDIO_IS_CLK_ENABLED -#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED __HAL_RCC_SDIO_IS_CLK_DISABLED -#define Sdmmc1ClockSelection SdioClockSelection -#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO -#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48 -#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK -#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG -#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE -#endif - -#if defined(STM32F7) || defined(STM32L4) -#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET -#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE -#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE -#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE -#define __HAL_RCC_SDIO_IS_CLK_ENABLED __HAL_RCC_SDMMC1_IS_CLK_ENABLED -#define __HAL_RCC_SDIO_IS_CLK_DISABLED __HAL_RCC_SDMMC1_IS_CLK_DISABLED -#define SdioClockSelection Sdmmc1ClockSelection -#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1 -#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG -#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE -#endif - -#if defined(STM32F7) -#define RCC_SDIOCLKSOURCE_CLK48 RCC_SDMMC1CLKSOURCE_CLK48 -#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK -#endif - -#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG -#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG - -#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE - -#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE -#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE -#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK -#define IS_RCC_HCLK_DIV IS_RCC_PCLK -#define IS_RCC_PERIPHCLK IS_RCC_PERIPHCLOCK - -#define RCC_IT_HSI14 RCC_IT_HSI14RDY - -#if defined(STM32L0) -#define RCC_IT_LSECSS RCC_IT_CSSLSE -#define RCC_IT_CSS RCC_IT_CSSHSE -#endif - -#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE -#define __HAL_RCC_MCO_CONFIG __HAL_RCC_MCO1_CONFIG -#define RCC_MCO_NODIV RCC_MCODIV_1 -#define RCC_MCO_DIV1 RCC_MCODIV_1 -#define RCC_MCO_DIV2 RCC_MCODIV_2 -#define RCC_MCO_DIV4 RCC_MCODIV_4 -#define RCC_MCO_DIV8 RCC_MCODIV_8 -#define RCC_MCO_DIV16 RCC_MCODIV_16 -#define RCC_MCO_DIV32 RCC_MCODIV_32 -#define RCC_MCO_DIV64 RCC_MCODIV_64 -#define RCC_MCO_DIV128 RCC_MCODIV_128 -#define RCC_MCOSOURCE_NONE RCC_MCO1SOURCE_NOCLOCK -#define RCC_MCOSOURCE_LSI RCC_MCO1SOURCE_LSI -#define RCC_MCOSOURCE_LSE RCC_MCO1SOURCE_LSE -#define RCC_MCOSOURCE_SYSCLK RCC_MCO1SOURCE_SYSCLK -#define RCC_MCOSOURCE_HSI RCC_MCO1SOURCE_HSI -#define RCC_MCOSOURCE_HSI14 RCC_MCO1SOURCE_HSI14 -#define RCC_MCOSOURCE_HSI48 RCC_MCO1SOURCE_HSI48 -#define RCC_MCOSOURCE_HSE RCC_MCO1SOURCE_HSE -#define RCC_MCOSOURCE_PLLCLK_DIV1 RCC_MCO1SOURCE_PLLCLK -#define RCC_MCOSOURCE_PLLCLK_NODIV RCC_MCO1SOURCE_PLLCLK -#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_MCO1SOURCE_PLLCLK_DIV2 - -#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK - -#define RCC_USBCLK_PLLSAI1 RCC_USBCLKSOURCE_PLLSAI1 -#define RCC_USBCLK_PLL RCC_USBCLKSOURCE_PLL -#define RCC_USBCLK_MSI RCC_USBCLKSOURCE_MSI -#define RCC_USBCLKSOURCE_PLLCLK RCC_USBCLKSOURCE_PLL -#define RCC_USBPLLCLK_DIV1 RCC_USBCLKSOURCE_PLL -#define RCC_USBPLLCLK_DIV1_5 RCC_USBCLKSOURCE_PLL_DIV1_5 -#define RCC_USBPLLCLK_DIV2 RCC_USBCLKSOURCE_PLL_DIV2 -#define RCC_USBPLLCLK_DIV3 RCC_USBCLKSOURCE_PLL_DIV3 - -#define HSION_BitNumber RCC_HSION_BIT_NUMBER -#define HSION_BITNUMBER RCC_HSION_BIT_NUMBER -#define HSEON_BitNumber RCC_HSEON_BIT_NUMBER -#define HSEON_BITNUMBER RCC_HSEON_BIT_NUMBER -#define MSION_BITNUMBER RCC_MSION_BIT_NUMBER -#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER -#define CSSON_BITNUMBER RCC_CSSON_BIT_NUMBER -#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER -#define PLLON_BITNUMBER RCC_PLLON_BIT_NUMBER -#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER -#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER -#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER -#define RTCEN_BITNUMBER RCC_RTCEN_BIT_NUMBER -#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER -#define BDRST_BITNUMBER RCC_BDRST_BIT_NUMBER -#define RTCRST_BITNUMBER RCC_RTCRST_BIT_NUMBER -#define LSION_BitNumber RCC_LSION_BIT_NUMBER -#define LSION_BITNUMBER RCC_LSION_BIT_NUMBER -#define LSEON_BitNumber RCC_LSEON_BIT_NUMBER -#define LSEON_BITNUMBER RCC_LSEON_BIT_NUMBER -#define LSEBYP_BITNUMBER RCC_LSEBYP_BIT_NUMBER -#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER -#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER -#define RMVF_BitNumber RCC_RMVF_BIT_NUMBER -#define RMVF_BITNUMBER RCC_RMVF_BIT_NUMBER -#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER -#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS -#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS -#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS -#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS -#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE -#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE - -#define CR_HSION_BB RCC_CR_HSION_BB -#define CR_CSSON_BB RCC_CR_CSSON_BB -#define CR_PLLON_BB RCC_CR_PLLON_BB -#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB -#define CR_MSION_BB RCC_CR_MSION_BB -#define CSR_LSION_BB RCC_CSR_LSION_BB -#define CSR_LSEON_BB RCC_CSR_LSEON_BB -#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB -#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB -#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB -#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB -#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB -#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB -#define CR_HSEON_BB RCC_CR_HSEON_BB -#define CSR_RMVF_BB RCC_CSR_RMVF_BB -#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB -#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB - -#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE -#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE -#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE -#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE -#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE __HAL_RCC_CRS_RELOADVALUE_CALCULATE - -#define __HAL_RCC_GET_IT_SOURCE __HAL_RCC_GET_IT - -#define RCC_CRS_SYNCWARM RCC_CRS_SYNCWARN -#define RCC_CRS_TRIMOV RCC_CRS_TRIMOVF - -#define RCC_PERIPHCLK_CK48 RCC_PERIPHCLK_CLK48 -#define RCC_CK48CLKSOURCE_PLLQ RCC_CLK48CLKSOURCE_PLLQ -#define RCC_CK48CLKSOURCE_PLLSAIP RCC_CLK48CLKSOURCE_PLLSAIP -#define RCC_CK48CLKSOURCE_PLLI2SQ RCC_CLK48CLKSOURCE_PLLI2SQ -#define IS_RCC_CK48CLKSOURCE IS_RCC_CLK48CLKSOURCE -#define RCC_SDIOCLKSOURCE_CK48 RCC_SDIOCLKSOURCE_CLK48 - -#define __HAL_RCC_DFSDM_CLK_ENABLE __HAL_RCC_DFSDM1_CLK_ENABLE -#define __HAL_RCC_DFSDM_CLK_DISABLE __HAL_RCC_DFSDM1_CLK_DISABLE -#define __HAL_RCC_DFSDM_IS_CLK_ENABLED __HAL_RCC_DFSDM1_IS_CLK_ENABLED -#define __HAL_RCC_DFSDM_IS_CLK_DISABLED __HAL_RCC_DFSDM1_IS_CLK_DISABLED -#define __HAL_RCC_DFSDM_FORCE_RESET __HAL_RCC_DFSDM1_FORCE_RESET -#define __HAL_RCC_DFSDM_RELEASE_RESET __HAL_RCC_DFSDM1_RELEASE_RESET -#define __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM1_CLK_SLEEP_ENABLE -#define __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM1_CLK_SLEEP_DISABLE -#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_ENABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_ENABLED -#define __HAL_RCC_DFSDM_IS_CLK_SLEEP_DISABLED __HAL_RCC_DFSDM1_IS_CLK_SLEEP_DISABLED -#define DfsdmClockSelection Dfsdm1ClockSelection -#define RCC_PERIPHCLK_DFSDM RCC_PERIPHCLK_DFSDM1 -#define RCC_DFSDMCLKSOURCE_PCLK RCC_DFSDM1CLKSOURCE_PCLK -#define RCC_DFSDMCLKSOURCE_SYSCLK RCC_DFSDM1CLKSOURCE_SYSCLK -#define __HAL_RCC_DFSDM_CONFIG __HAL_RCC_DFSDM1_CONFIG -#define __HAL_RCC_GET_DFSDM_SOURCE __HAL_RCC_GET_DFSDM1_SOURCE - -/** - * @} - */ - -/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose - * @{ - */ -#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit) - -/** - * @} - */ - -/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG -#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT -#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT - -#if defined (STM32F1) -#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() - -#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT() - -#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT() - -#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG() - -#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() -#else -#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG())) -#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT())) -#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT())) -#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG())) -#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \ - (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \ - __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT())) -#endif /* STM32F1 */ - -#define IS_ALARM IS_RTC_ALARM -#define IS_ALARM_MASK IS_RTC_ALARM_MASK -#define IS_TAMPER IS_RTC_TAMPER -#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE -#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER -#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT -#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE -#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION -#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE -#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ -#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION -#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER -#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK -#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER - -#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE -#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE - -/** - * @} - */ - -/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose - * @{ - */ - -#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE -#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS - -#if defined(STM32F4) -#define SD_SDMMC_DISABLED SD_SDIO_DISABLED -#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY -#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED -#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION -#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND -#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT -#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED -#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE -#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE -#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE -#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL -#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT -#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT -#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG -#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG -#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT -#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT -#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS -#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT -#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND -/* alias CMSIS */ -#define SDMMC1_IRQn SDIO_IRQn -#define SDMMC1_IRQHandler SDIO_IRQHandler -#endif - -#if defined(STM32F7) || defined(STM32L4) -#define SD_SDIO_DISABLED SD_SDMMC_DISABLED -#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY -#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED -#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION -#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND -#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT -#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED -#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE -#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE -#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE -#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE -#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT -#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT -#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG -#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG -#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT -#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT -#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS -#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT -#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND -/* alias CMSIS for compatibilities */ -#define SDIO_IRQn SDMMC1_IRQn -#define SDIO_IRQHandler SDMMC1_IRQHandler -#endif -/** - * @} - */ - -/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT -#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT -#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE -#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE -#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE -#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE - -#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE -#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE - -#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE - -/** - * @} - */ - -/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1 -#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2 -#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START -#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH -#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR -#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE -#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE -#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED -/** - * @} - */ - -/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __HAL_SPI_1LINE_TX SPI_1LINE_TX -#define __HAL_SPI_1LINE_RX SPI_1LINE_RX -#define __HAL_SPI_RESET_CRC SPI_RESET_CRC - -/** - * @} - */ - -/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE -#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION -#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE -#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION - -#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD - -#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE -#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE - -/** - * @} - */ - - -/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT -#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT -#define __USART_ENABLE __HAL_USART_ENABLE -#define __USART_DISABLE __HAL_USART_DISABLE - -#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE -#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE - -/** - * @} - */ - -/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose - * @{ - */ -#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE - -#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE -#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE -#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE -#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE - -#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE -#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE -#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE -#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE - -#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT -#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT -#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG -#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG -#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE -#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE -#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE - -#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT -#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT -#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG -#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG -#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE -#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE -#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE -#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT - -#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT -#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT -#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG -#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG -#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE -#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE -#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE -#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT - -#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup -#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup - -#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo -#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo -/** - * @} - */ - -/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE -#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE - -#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE -#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT - -#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE - -#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN -#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER -#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER -#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER -#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD -#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD -#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION -#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION -#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER -#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER -#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE -#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE - -#define TIM_BREAKINPUTSOURCE_DFSDM TIM_BREAKINPUTSOURCE_DFSDM1 -/** - * @} - */ - -/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose - * @{ - */ - -#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT -#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT -#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG -#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG -#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER -#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER -#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER - -#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE -#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE -#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE -/** - * @} - */ - -/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose - * @{ - */ -#define __HAL_LTDC_LAYER LTDC_LAYER -/** - * @} - */ - -/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose - * @{ - */ -#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE -#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE -#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE -#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE -#define SAI_STREOMODE SAI_STEREOMODE -#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY -#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL -#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL -#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL -#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL -#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL -#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE -#define SAI_SYNCHRONOUS_EXT SAI_SYNCHRONOUS_EXT_SAI1 -#define SAI_SYNCEXT_IN_ENABLE SAI_SYNCEXT_OUTBLOCKA_ENABLE -/** - * @} - */ - - -/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose - * @{ - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* ___STM32_HAL_LEGACY */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h deleted file mode 100644 index 3b949f7..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h +++ /dev/null @@ -1,328 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief This file contains all the functions prototypes for the HAL - * module driver. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_H -#define __STM32F1xx_HAL_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_conf.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup HAL - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* Exported macro ------------------------------------------------------------*/ - -/** @defgroup HAL_Exported_Macros HAL Exported Macros - * @{ - */ - -/** @defgroup DBGMCU_Freeze_Unfreeze Freeze Unfreeze Peripherals in Debug mode - * @brief Freeze/Unfreeze Peripherals in Debug mode - * Note: On devices STM32F10xx8 and STM32F10xxB, - * STM32F101xC/D/E and STM32F103xC/D/E, - * STM32F101xF/G and STM32F103xF/G - * STM32F10xx4 and STM32F10xx6 - * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in - * debug mode (not accessible by the user software in normal mode). - * Refer to errata sheet of these devices for more details. - * @{ - */ - -/* Peripherals on APB1 */ -/** - * @brief TIM2 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM2() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM2() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM2_STOP) - -/** - * @brief TIM3 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM3() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM3() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM3_STOP) - -#if defined (DBGMCU_CR_DBG_TIM4_STOP) -/** - * @brief TIM4 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM4() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM4() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM4_STOP) -#endif - -#if defined (DBGMCU_CR_DBG_TIM5_STOP) -/** - * @brief TIM5 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM5() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM5() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM5_STOP) -#endif - -#if defined (DBGMCU_CR_DBG_TIM6_STOP) -/** - * @brief TIM6 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM6() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM6() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM6_STOP) -#endif - -#if defined (DBGMCU_CR_DBG_TIM7_STOP) -/** - * @brief TIM7 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM7() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM7() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM7_STOP) -#endif - -#if defined (DBGMCU_CR_DBG_TIM12_STOP) -/** - * @brief TIM12 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM12() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM12() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM12_STOP) -#endif - -#if defined (DBGMCU_CR_DBG_TIM13_STOP) -/** - * @brief TIM13 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM13() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM13() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM13_STOP) -#endif - -#if defined (DBGMCU_CR_DBG_TIM14_STOP) -/** - * @brief TIM14 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM14() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM14() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM14_STOP) -#endif - -/** - * @brief WWDG Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_WWDG() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP) -#define __HAL_DBGMCU_UNFREEZE_WWDG() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_WWDG_STOP) - -/** - * @brief IWDG Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_IWDG() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP) -#define __HAL_DBGMCU_UNFREEZE_IWDG() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_IWDG_STOP) - -/** - * @brief I2C1 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT) -#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT) - -#if defined (DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT) -/** - * @brief I2C2 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT) -#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT) -#endif - -#if defined (DBGMCU_CR_DBG_CAN1_STOP) -/** - * @brief CAN1 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_CAN1() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP) -#define __HAL_DBGMCU_UNFREEZE_CAN1() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN1_STOP) -#endif - -#if defined (DBGMCU_CR_DBG_CAN2_STOP) -/** - * @brief CAN2 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_CAN2() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP) -#define __HAL_DBGMCU_UNFREEZE_CAN2() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_CAN2_STOP) -#endif - -/* Peripherals on APB2 */ -#if defined (DBGMCU_CR_DBG_TIM1_STOP) -/** - * @brief TIM1 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM1() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM1() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM1_STOP) -#endif - -#if defined (DBGMCU_CR_DBG_TIM8_STOP) -/** - * @brief TIM8 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM8() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM8() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM8_STOP) -#endif - -#if defined (DBGMCU_CR_DBG_TIM9_STOP) -/** - * @brief TIM9 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM9() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM9() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM9_STOP) -#endif - -#if defined (DBGMCU_CR_DBG_TIM10_STOP) -/** - * @brief TIM10 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM10() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM10() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM10_STOP) -#endif - -#if defined (DBGMCU_CR_DBG_TIM11_STOP) -/** - * @brief TIM11 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM11() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM11() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM11_STOP) -#endif - - -#if defined (DBGMCU_CR_DBG_TIM15_STOP) -/** - * @brief TIM15 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM15() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM15() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM15_STOP) -#endif - -#if defined (DBGMCU_CR_DBG_TIM16_STOP) -/** - * @brief TIM16 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM16() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM16() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM16_STOP) -#endif - -#if defined (DBGMCU_CR_DBG_TIM17_STOP) -/** - * @brief TIM17 Peripherals Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM17() SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP) -#define __HAL_DBGMCU_UNFREEZE_TIM17() CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_TIM17_STOP) -#endif - -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup HAL_Exported_Functions - * @{ - */ - -/** @addtogroup HAL_Exported_Functions_Group1 - * @{ - */ - -/* Initialization and de-initialization functions ******************************/ -HAL_StatusTypeDef HAL_Init(void); -HAL_StatusTypeDef HAL_DeInit(void); -void HAL_MspInit(void); -void HAL_MspDeInit(void); -HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); - -/** - * @} - */ - -/** @addtogroup HAL_Exported_Functions_Group2 - * @{ - */ - -/* Peripheral Control functions ************************************************/ -void HAL_IncTick(void); -void HAL_Delay(__IO uint32_t Delay); -uint32_t HAL_GetTick(void); -void HAL_SuspendTick(void); -void HAL_ResumeTick(void); -uint32_t HAL_GetHalVersion(void); -uint32_t HAL_GetREVID(void); -uint32_t HAL_GetDEVID(void); -void HAL_DBGMCU_EnableDBGSleepMode(void); -void HAL_DBGMCU_DisableDBGSleepMode(void); -void HAL_DBGMCU_EnableDBGStopMode(void); -void HAL_DBGMCU_DisableDBGStopMode(void); -void HAL_DBGMCU_EnableDBGStandbyMode(void); -void HAL_DBGMCU_DisableDBGStandbyMode(void); - -/** - * @} - */ - -/** - * @} - */ - - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h deleted file mode 100644 index d2ee169..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h +++ /dev/null @@ -1,476 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_cortex.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of CORTEX HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_CORTEX_H -#define __STM32F1xx_HAL_CORTEX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup CORTEX - * @{ - */ -/* Exported types ------------------------------------------------------------*/ -/** @defgroup CORTEX_Exported_Types Cortex Exported Types - * @{ - */ - -#if (__MPU_PRESENT == 1) -/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition - * @brief MPU Region initialization structure - * @{ - */ -typedef struct -{ - uint8_t Enable; /*!< Specifies the status of the region. - This parameter can be a value of @ref CORTEX_MPU_Region_Enable */ - uint8_t Number; /*!< Specifies the number of the region to protect. - This parameter can be a value of @ref CORTEX_MPU_Region_Number */ - uint32_t BaseAddress; /*!< Specifies the base address of the region to protect. */ - uint8_t Size; /*!< Specifies the size of the region to protect. - This parameter can be a value of @ref CORTEX_MPU_Region_Size */ - uint8_t SubRegionDisable; /*!< Specifies the number of the subregion protection to disable. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ - uint8_t TypeExtField; /*!< Specifies the TEX field level. - This parameter can be a value of @ref CORTEX_MPU_TEX_Levels */ - uint8_t AccessPermission; /*!< Specifies the region access permission type. - This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes */ - uint8_t DisableExec; /*!< Specifies the instruction access status. - This parameter can be a value of @ref CORTEX_MPU_Instruction_Access */ - uint8_t IsShareable; /*!< Specifies the shareability status of the protected region. - This parameter can be a value of @ref CORTEX_MPU_Access_Shareable */ - uint8_t IsCacheable; /*!< Specifies the cacheable status of the region protected. - This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable */ - uint8_t IsBufferable; /*!< Specifies the bufferable status of the protected region. - This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable */ -}MPU_Region_InitTypeDef; -/** - * @} - */ -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants - * @{ - */ - - -/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group - * @{ - */ - -#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bits for pre-emption priority - 4 bits for subpriority */ -#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bits for pre-emption priority - 3 bits for subpriority */ -#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority - 2 bits for subpriority */ -#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority - 1 bits for subpriority */ -#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority - 0 bits for subpriority */ -/** - * @} - */ - -/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source - * @{ - */ -#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000) -#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004) - -/** - * @} - */ - -#if (__MPU_PRESENT == 1) -/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control - * @{ - */ -#define MPU_HFNMI_PRIVDEF_NONE ((uint32_t)0x00000000) -#define MPU_HARDFAULT_NMI ((uint32_t)0x00000002) -#define MPU_PRIVILEGED_DEFAULT ((uint32_t)0x00000004) -#define MPU_HFNMI_PRIVDEF ((uint32_t)0x00000006) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable - * @{ - */ -#define MPU_REGION_ENABLE ((uint8_t)0x01) -#define MPU_REGION_DISABLE ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access - * @{ - */ -#define MPU_INSTRUCTION_ACCESS_ENABLE ((uint8_t)0x00) -#define MPU_INSTRUCTION_ACCESS_DISABLE ((uint8_t)0x01) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable - * @{ - */ -#define MPU_ACCESS_SHAREABLE ((uint8_t)0x01) -#define MPU_ACCESS_NOT_SHAREABLE ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable - * @{ - */ -#define MPU_ACCESS_CACHEABLE ((uint8_t)0x01) -#define MPU_ACCESS_NOT_CACHEABLE ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable - * @{ - */ -#define MPU_ACCESS_BUFFERABLE ((uint8_t)0x01) -#define MPU_ACCESS_NOT_BUFFERABLE ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels - * @{ - */ -#define MPU_TEX_LEVEL0 ((uint8_t)0x00) -#define MPU_TEX_LEVEL1 ((uint8_t)0x01) -#define MPU_TEX_LEVEL2 ((uint8_t)0x02) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size - * @{ - */ -#define MPU_REGION_SIZE_32B ((uint8_t)0x04) -#define MPU_REGION_SIZE_64B ((uint8_t)0x05) -#define MPU_REGION_SIZE_128B ((uint8_t)0x06) -#define MPU_REGION_SIZE_256B ((uint8_t)0x07) -#define MPU_REGION_SIZE_512B ((uint8_t)0x08) -#define MPU_REGION_SIZE_1KB ((uint8_t)0x09) -#define MPU_REGION_SIZE_2KB ((uint8_t)0x0A) -#define MPU_REGION_SIZE_4KB ((uint8_t)0x0B) -#define MPU_REGION_SIZE_8KB ((uint8_t)0x0C) -#define MPU_REGION_SIZE_16KB ((uint8_t)0x0D) -#define MPU_REGION_SIZE_32KB ((uint8_t)0x0E) -#define MPU_REGION_SIZE_64KB ((uint8_t)0x0F) -#define MPU_REGION_SIZE_128KB ((uint8_t)0x10) -#define MPU_REGION_SIZE_256KB ((uint8_t)0x11) -#define MPU_REGION_SIZE_512KB ((uint8_t)0x12) -#define MPU_REGION_SIZE_1MB ((uint8_t)0x13) -#define MPU_REGION_SIZE_2MB ((uint8_t)0x14) -#define MPU_REGION_SIZE_4MB ((uint8_t)0x15) -#define MPU_REGION_SIZE_8MB ((uint8_t)0x16) -#define MPU_REGION_SIZE_16MB ((uint8_t)0x17) -#define MPU_REGION_SIZE_32MB ((uint8_t)0x18) -#define MPU_REGION_SIZE_64MB ((uint8_t)0x19) -#define MPU_REGION_SIZE_128MB ((uint8_t)0x1A) -#define MPU_REGION_SIZE_256MB ((uint8_t)0x1B) -#define MPU_REGION_SIZE_512MB ((uint8_t)0x1C) -#define MPU_REGION_SIZE_1GB ((uint8_t)0x1D) -#define MPU_REGION_SIZE_2GB ((uint8_t)0x1E) -#define MPU_REGION_SIZE_4GB ((uint8_t)0x1F) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes - * @{ - */ -#define MPU_REGION_NO_ACCESS ((uint8_t)0x00) -#define MPU_REGION_PRIV_RW ((uint8_t)0x01) -#define MPU_REGION_PRIV_RW_URO ((uint8_t)0x02) -#define MPU_REGION_FULL_ACCESS ((uint8_t)0x03) -#define MPU_REGION_PRIV_RO ((uint8_t)0x05) -#define MPU_REGION_PRIV_RO_URO ((uint8_t)0x06) -/** - * @} - */ - -/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number - * @{ - */ -#define MPU_REGION_NUMBER0 ((uint8_t)0x00) -#define MPU_REGION_NUMBER1 ((uint8_t)0x01) -#define MPU_REGION_NUMBER2 ((uint8_t)0x02) -#define MPU_REGION_NUMBER3 ((uint8_t)0x03) -#define MPU_REGION_NUMBER4 ((uint8_t)0x04) -#define MPU_REGION_NUMBER5 ((uint8_t)0x05) -#define MPU_REGION_NUMBER6 ((uint8_t)0x06) -#define MPU_REGION_NUMBER7 ((uint8_t)0x07) -/** - * @} - */ -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - - -/* Private macro -------------------------------------------------------------*/ -/** @defgroup CORTEX_Private_Macros CORTEX Private Macros - * @{ - */ - -/** @defgroup CORTEX_Preemption_Priority_Group_Macro CORTEX Preemption Priority Group - * @{ - */ -#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \ - ((GROUP) == NVIC_PRIORITYGROUP_1) || \ - ((GROUP) == NVIC_PRIORITYGROUP_2) || \ - ((GROUP) == NVIC_PRIORITYGROUP_3) || \ - ((GROUP) == NVIC_PRIORITYGROUP_4)) - -#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) - -#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) - -#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00) - -/** - * @} - */ - -/** @defgroup CORTEX_SysTick_clock_source_Macro_Private CORTEX SysTick clock source - * @{ - */ -#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ - ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) -/** - * @} - */ -#if (__MPU_PRESENT == 1) -#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \ - ((STATE) == MPU_REGION_DISABLE)) - -#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \ - ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE)) - -#define IS_MPU_ACCESS_SHAREABLE(STATE) (((STATE) == MPU_ACCESS_SHAREABLE) || \ - ((STATE) == MPU_ACCESS_NOT_SHAREABLE)) - -#define IS_MPU_ACCESS_CACHEABLE(STATE) (((STATE) == MPU_ACCESS_CACHEABLE) || \ - ((STATE) == MPU_ACCESS_NOT_CACHEABLE)) - -#define IS_MPU_ACCESS_BUFFERABLE(STATE) (((STATE) == MPU_ACCESS_BUFFERABLE) || \ - ((STATE) == MPU_ACCESS_NOT_BUFFERABLE)) - -#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0) || \ - ((TYPE) == MPU_TEX_LEVEL1) || \ - ((TYPE) == MPU_TEX_LEVEL2)) - -#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS) || \ - ((TYPE) == MPU_REGION_PRIV_RW) || \ - ((TYPE) == MPU_REGION_PRIV_RW_URO) || \ - ((TYPE) == MPU_REGION_FULL_ACCESS) || \ - ((TYPE) == MPU_REGION_PRIV_RO) || \ - ((TYPE) == MPU_REGION_PRIV_RO_URO)) - -#define IS_MPU_REGION_NUMBER(NUMBER) (((NUMBER) == MPU_REGION_NUMBER0) || \ - ((NUMBER) == MPU_REGION_NUMBER1) || \ - ((NUMBER) == MPU_REGION_NUMBER2) || \ - ((NUMBER) == MPU_REGION_NUMBER3) || \ - ((NUMBER) == MPU_REGION_NUMBER4) || \ - ((NUMBER) == MPU_REGION_NUMBER5) || \ - ((NUMBER) == MPU_REGION_NUMBER6) || \ - ((NUMBER) == MPU_REGION_NUMBER7)) - -#define IS_MPU_REGION_SIZE(SIZE) (((SIZE) == MPU_REGION_SIZE_32B) || \ - ((SIZE) == MPU_REGION_SIZE_64B) || \ - ((SIZE) == MPU_REGION_SIZE_128B) || \ - ((SIZE) == MPU_REGION_SIZE_256B) || \ - ((SIZE) == MPU_REGION_SIZE_512B) || \ - ((SIZE) == MPU_REGION_SIZE_1KB) || \ - ((SIZE) == MPU_REGION_SIZE_2KB) || \ - ((SIZE) == MPU_REGION_SIZE_4KB) || \ - ((SIZE) == MPU_REGION_SIZE_8KB) || \ - ((SIZE) == MPU_REGION_SIZE_16KB) || \ - ((SIZE) == MPU_REGION_SIZE_32KB) || \ - ((SIZE) == MPU_REGION_SIZE_64KB) || \ - ((SIZE) == MPU_REGION_SIZE_128KB) || \ - ((SIZE) == MPU_REGION_SIZE_256KB) || \ - ((SIZE) == MPU_REGION_SIZE_512KB) || \ - ((SIZE) == MPU_REGION_SIZE_1MB) || \ - ((SIZE) == MPU_REGION_SIZE_2MB) || \ - ((SIZE) == MPU_REGION_SIZE_4MB) || \ - ((SIZE) == MPU_REGION_SIZE_8MB) || \ - ((SIZE) == MPU_REGION_SIZE_16MB) || \ - ((SIZE) == MPU_REGION_SIZE_32MB) || \ - ((SIZE) == MPU_REGION_SIZE_64MB) || \ - ((SIZE) == MPU_REGION_SIZE_128MB) || \ - ((SIZE) == MPU_REGION_SIZE_256MB) || \ - ((SIZE) == MPU_REGION_SIZE_512MB) || \ - ((SIZE) == MPU_REGION_SIZE_1GB) || \ - ((SIZE) == MPU_REGION_SIZE_2GB) || \ - ((SIZE) == MPU_REGION_SIZE_4GB)) - -#define IS_MPU_SUB_REGION_DISABLE(SUBREGION) ((SUBREGION) < (uint16_t)0x00FF) -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup CORTEX_Exported_Functions - * @{ - */ - -/** @addtogroup CORTEX_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup); -void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); -void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); -void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); -void HAL_NVIC_SystemReset(void); -uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); -/** - * @} - */ - -/** @addtogroup CORTEX_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ***********************************************/ -#if (__MPU_PRESENT == 1) -void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init); -#endif /* __MPU_PRESENT */ -uint32_t HAL_NVIC_GetPriorityGrouping(void); -void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority); -uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); -void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); -void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); -uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn); -void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); -void HAL_SYSTICK_IRQHandler(void); -void HAL_SYSTICK_Callback(void); -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup CORTEX_Private_Functions CORTEX Private Functions - * @brief CORTEX private functions - * @{ - */ - -#if (__MPU_PRESENT == 1) -/** - * @brief Disables the MPU - * @retval None - */ -__STATIC_INLINE void HAL_MPU_Disable(void) -{ - /* Disable fault exceptions */ - SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk; - - /* Disable the MPU */ - MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk; -} - -/** - * @brief Enables the MPU - * @param MPU_Control: Specifies the control mode of the MPU during hard fault, - * NMI, FAULTMASK and privileged accessto the default memory - * This parameter can be one of the following values: - * @arg MPU_HFNMI_PRIVDEF_NONE - * @arg MPU_HARDFAULT_NMI - * @arg MPU_PRIVILEGED_DEFAULT - * @arg MPU_HFNMI_PRIVDEF - * @retval None - */ -__STATIC_INLINE void HAL_MPU_Enable(uint32_t MPU_Control) -{ - /* Enable the MPU */ - MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk; - - /* Enable fault exceptions */ - SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk; -} -#endif /* __MPU_PRESENT */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_CORTEX_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h deleted file mode 100644 index 8600be2..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h +++ /dev/null @@ -1,214 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_def.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief This file contains HAL common defines, enumeration, macros and - * structures definitions. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_DEF -#define __STM32F1xx_HAL_DEF - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx.h" -#include "Legacy/stm32_hal_legacy.h" -#include <stdio.h> - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief HAL Status structures definition - */ -typedef enum -{ - HAL_OK = 0x00, - HAL_ERROR = 0x01, - HAL_BUSY = 0x02, - HAL_TIMEOUT = 0x03 -} HAL_StatusTypeDef; - -/** - * @brief HAL Lock structures definition - */ -typedef enum -{ - HAL_UNLOCKED = 0x00, - HAL_LOCKED = 0x01 -} HAL_LockTypeDef; - -/* Exported macro ------------------------------------------------------------*/ - -#define HAL_MAX_DELAY 0xFFFFFFFF - -#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET) -#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET) - -#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD_, __DMA_HANDLE_) \ - do{ \ - (__HANDLE__)->__PPP_DMA_FIELD_ = &(__DMA_HANDLE_); \ - (__DMA_HANDLE_).Parent = (__HANDLE__); \ - } while(0) - -#define UNUSED(x) ((void)(x)) - -/** @brief Reset the Handle's State field. - * @param __HANDLE__: specifies the Peripheral Handle. - * @note This macro can be used for the following purpose: - * - When the Handle is declared as local variable; before passing it as parameter - * to HAL_PPP_Init() for the first time, it is mandatory to use this macro - * to set to 0 the Handle's "State" field. - * Otherwise, "State" field may have any random value and the first time the function - * HAL_PPP_Init() is called, the low level hardware initialization will be missed - * (i.e. HAL_PPP_MspInit() will not be executed). - * - When there is a need to reconfigure the low level hardware: instead of calling - * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). - * In this later function, when the Handle's "State" field is set to 0, it will execute the function - * HAL_PPP_MspInit() which will reconfigure the low level hardware. - * @retval None - */ -#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0) - -#if (USE_RTOS == 1) - #error " USE_RTOS should be 0 in the current HAL release " -#else - #define __HAL_LOCK(__HANDLE__) \ - do{ \ - if((__HANDLE__)->Lock == HAL_LOCKED) \ - { \ - return HAL_BUSY; \ - } \ - else \ - { \ - (__HANDLE__)->Lock = HAL_LOCKED; \ - } \ - }while (0) - - #define __HAL_UNLOCK(__HANDLE__) \ - do{ \ - (__HANDLE__)->Lock = HAL_UNLOCKED; \ - }while (0) -#endif /* USE_RTOS */ - -#if defined ( __GNUC__ ) - #ifndef __weak - #define __weak __attribute__((weak)) - #endif /* __weak */ - #ifndef __packed - #define __packed __attribute__((__packed__)) - #endif /* __packed */ -#endif /* __GNUC__ */ - - -/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ -#if defined (__GNUC__) /* GNU Compiler */ - #ifndef __ALIGN_END - #define __ALIGN_END __attribute__ ((aligned (4))) - #endif /* __ALIGN_END */ - #ifndef __ALIGN_BEGIN - #define __ALIGN_BEGIN - #endif /* __ALIGN_BEGIN */ -#else - #ifndef __ALIGN_END - #define __ALIGN_END - #endif /* __ALIGN_END */ - #ifndef __ALIGN_BEGIN - #if defined (__CC_ARM) /* ARM Compiler */ - #define __ALIGN_BEGIN __align(4) - #elif defined (__ICCARM__) /* IAR Compiler */ - #define __ALIGN_BEGIN - #endif /* __CC_ARM */ - #endif /* __ALIGN_BEGIN */ -#endif /* __GNUC__ */ - -/** - * @brief __RAM_FUNC definition - */ -#if defined ( __CC_ARM ) -/* ARM Compiler - ------------ - RAM functions are defined using the toolchain options. - Functions that are executed in RAM should reside in a separate source module. - Using the 'Options for File' dialog you can simply change the 'Code / Const' - area of a module to a memory space in physical RAM. - Available memory areas are declared in the 'Target' tab of the 'Options for Target' - dialog. -*/ -#define __RAM_FUNC HAL_StatusTypeDef - -#elif defined ( __ICCARM__ ) -/* ICCARM Compiler - --------------- - RAM functions are defined using a specific toolchain keyword "__ramfunc". -*/ -#define __RAM_FUNC __ramfunc HAL_StatusTypeDef - -#elif defined ( __GNUC__ ) -/* GNU Compiler - ------------ - RAM functions are defined using a specific toolchain attribute - "__attribute__((section(".RamFunc")))". -*/ -#define __RAM_FUNC HAL_StatusTypeDef __attribute__((section(".RamFunc"))) - -#endif - -/** - * @brief __NOINLINE definition - */ -#if defined ( __CC_ARM ) || defined ( __GNUC__ ) -/* ARM & GNUCompiler - ---------------- -*/ -#define __NOINLINE __attribute__ ( (noinline) ) - -#elif defined ( __ICCARM__ ) -/* ICCARM Compiler - --------------- -*/ -#define __NOINLINE _Pragma("optimize = no_inline") - -#endif - - -#ifdef __cplusplus -} -#endif - -#endif /* ___STM32F1xx_HAL_DEF */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h deleted file mode 100644 index d26fd60..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h +++ /dev/null @@ -1,480 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_dma.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of DMA HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_DMA_H -#define __STM32F1xx_HAL_DMA_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup DMA - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Types DMA Exported Types - * @{ - */ - -/** - * @brief DMA Configuration Structure definition - */ -typedef struct -{ - uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, - from memory to memory or from peripheral to memory. - This parameter can be a value of @ref DMA_Data_transfer_direction */ - - uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. - This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ - - uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. - This parameter can be a value of @ref DMA_Memory_incremented_mode */ - - uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. - This parameter can be a value of @ref DMA_Peripheral_data_size */ - - uint32_t MemDataAlignment; /*!< Specifies the Memory data width. - This parameter can be a value of @ref DMA_Memory_data_size */ - - uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx. - This parameter can be a value of @ref DMA_mode - @note The circular buffer mode cannot be used if the memory-to-memory - data transfer is configured on the selected Channel */ - - uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx. - This parameter can be a value of @ref DMA_Priority_level */ -} DMA_InitTypeDef; - -/** - * @brief DMA Configuration enumeration values definition - */ -typedef enum -{ - DMA_MODE = 0, /*!< Control related DMA mode Parameter in DMA_InitTypeDef */ - DMA_PRIORITY = 1, /*!< Control related priority level Parameter in DMA_InitTypeDef */ - -} DMA_ControlTypeDef; - -/** - * @brief HAL DMA State structures definition - */ -typedef enum -{ - HAL_DMA_STATE_RESET = 0x00, /*!< DMA not yet initialized or disabled */ - HAL_DMA_STATE_READY = 0x01, /*!< DMA initialized and ready for use */ - HAL_DMA_STATE_READY_HALF = 0x11, /*!< DMA Half process success */ - HAL_DMA_STATE_BUSY = 0x02, /*!< DMA process is ongoing */ - HAL_DMA_STATE_TIMEOUT = 0x03, /*!< DMA timeout state */ - HAL_DMA_STATE_ERROR = 0x04, /*!< DMA error state */ -}HAL_DMA_StateTypeDef; - -/** - * @brief HAL DMA Error Code structure definition - */ -typedef enum -{ - HAL_DMA_FULL_TRANSFER = 0x00, /*!< Full transfer */ - HAL_DMA_HALF_TRANSFER = 0x01, /*!< Half Transfer */ -}HAL_DMA_LevelCompleteTypeDef; - -/** - * @brief DMA handle Structure definition - */ -typedef struct __DMA_HandleTypeDef -{ - DMA_Channel_TypeDef *Instance; /*!< Register base address */ - - DMA_InitTypeDef Init; /*!< DMA communication parameters */ - - HAL_LockTypeDef Lock; /*!< DMA locking object */ - - HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ - - void *Parent; /*!< Parent object state */ - - void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ - - void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ - - void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ - - __IO uint32_t ErrorCode; /*!< DMA Error code */ -} DMA_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Constants DMA Exported Constants - * @{ - */ - -/** @defgroup DMA_Error_Code DMA Error Code - * @{ - */ - #define HAL_DMA_ERROR_NONE ((uint32_t)0x00) /*!< No error */ - #define HAL_DMA_ERROR_TE ((uint32_t)0x01) /*!< Transfer error */ - #define HAL_DMA_ERROR_TIMEOUT ((uint32_t)0x20) /*!< Timeout error */ - -/** - * @} - */ - -/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction - * @{ - */ -#define DMA_PERIPH_TO_MEMORY ((uint32_t)0x00000000) /*!< Peripheral to memory direction */ -#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */ -#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_CCR_MEM2MEM) /*!< Memory to memory direction */ - -/** - * @} - */ - -/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode - * @{ - */ -#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */ -#define DMA_PINC_DISABLE ((uint32_t)0x00000000) /*!< Peripheral increment mode Disable */ -/** - * @} - */ - -/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode - * @{ - */ -#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */ -#define DMA_MINC_DISABLE ((uint32_t)0x00000000) /*!< Memory increment mode Disable */ -/** - * @} - */ - -/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size - * @{ - */ -#define DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Peripheral data alignment: Byte */ -#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */ -#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment: Word */ -/** - * @} - */ - -/** @defgroup DMA_Memory_data_size DMA Memory data size - * @{ - */ -#define DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Memory data alignment: Byte */ -#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment: HalfWord */ -#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment: Word */ -/** - * @} - */ - -/** @defgroup DMA_mode DMA mode - * @{ - */ -#define DMA_NORMAL ((uint32_t)0x00000000) /*!< Normal mode */ -#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular mode */ -/** - * @} - */ - -/** @defgroup DMA_Priority_level DMA Priority level - * @{ - */ -#define DMA_PRIORITY_LOW ((uint32_t)0x00000000) /*!< Priority level : Low */ -#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */ -#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */ -#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */ -/** - * @} - */ - - -/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions - * @{ - */ -#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE) -#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE) -#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE) -/** - * @} - */ - -/** @defgroup DMA_flag_definitions DMA flag definitions - * @{ - */ -#define DMA_FLAG_GL1 ((uint32_t)0x00000001) -#define DMA_FLAG_TC1 ((uint32_t)0x00000002) -#define DMA_FLAG_HT1 ((uint32_t)0x00000004) -#define DMA_FLAG_TE1 ((uint32_t)0x00000008) -#define DMA_FLAG_GL2 ((uint32_t)0x00000010) -#define DMA_FLAG_TC2 ((uint32_t)0x00000020) -#define DMA_FLAG_HT2 ((uint32_t)0x00000040) -#define DMA_FLAG_TE2 ((uint32_t)0x00000080) -#define DMA_FLAG_GL3 ((uint32_t)0x00000100) -#define DMA_FLAG_TC3 ((uint32_t)0x00000200) -#define DMA_FLAG_HT3 ((uint32_t)0x00000400) -#define DMA_FLAG_TE3 ((uint32_t)0x00000800) -#define DMA_FLAG_GL4 ((uint32_t)0x00001000) -#define DMA_FLAG_TC4 ((uint32_t)0x00002000) -#define DMA_FLAG_HT4 ((uint32_t)0x00004000) -#define DMA_FLAG_TE4 ((uint32_t)0x00008000) -#define DMA_FLAG_GL5 ((uint32_t)0x00010000) -#define DMA_FLAG_TC5 ((uint32_t)0x00020000) -#define DMA_FLAG_HT5 ((uint32_t)0x00040000) -#define DMA_FLAG_TE5 ((uint32_t)0x00080000) -#define DMA_FLAG_GL6 ((uint32_t)0x00100000) -#define DMA_FLAG_TC6 ((uint32_t)0x00200000) -#define DMA_FLAG_HT6 ((uint32_t)0x00400000) -#define DMA_FLAG_TE6 ((uint32_t)0x00800000) -#define DMA_FLAG_GL7 ((uint32_t)0x01000000) -#define DMA_FLAG_TC7 ((uint32_t)0x02000000) -#define DMA_FLAG_HT7 ((uint32_t)0x04000000) -#define DMA_FLAG_TE7 ((uint32_t)0x08000000) -/** - * @} - */ - -/** - * @} - */ - - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup DMA_Exported_Macros DMA Exported Macros - * @{ - */ - -/** @brief Reset DMA handle state - * @param __HANDLE__: DMA handle. - * @retval None - */ -#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) - -/** - * @brief Enable the specified DMA Channel. - * @param __HANDLE__: DMA handle - * @retval None. - */ -#define __HAL_DMA_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN)) - -/** - * @brief Disable the specified DMA Channel. - * @param __HANDLE__: DMA handle - * @retval None. - */ -#define __HAL_DMA_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN)) - - -/* Interrupt & Flag management */ - -/** - * @brief Enables the specified DMA Channel interrupts. - * @param __HANDLE__: DMA handle - * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask - * @arg DMA_IT_HT: Half transfer complete interrupt mask - * @arg DMA_IT_TE: Transfer error interrupt mask - * @retval None - */ -#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CCR, (__INTERRUPT__))) - -/** - * @brief Disables the specified DMA Channel interrupts. - * @param __HANDLE__: DMA handle - * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask - * @arg DMA_IT_HT: Half transfer complete interrupt mask - * @arg DMA_IT_TE: Transfer error interrupt mask - * @retval None - */ -#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CCR , (__INTERRUPT__))) - -/** - * @brief Checks whether the specified DMA Channel interrupt is enabled or disabled. - * @param __HANDLE__: DMA handle - * @param __INTERRUPT__: specifies the DMA interrupt source to check. - * This parameter can be one of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask - * @arg DMA_IT_HT: Half transfer complete interrupt mask - * @arg DMA_IT_TE: Transfer error interrupt mask - * @retval The state of DMA_IT (SET or RESET). - */ -#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CCR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** - * @brief Returns the number of remaining data units in the current DMAy Channelx transfer. - * @param __HANDLE__: DMA handle - * - * @retval The number of remaining data units in the current DMA Channel transfer. - */ -#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNDTR) - -/** - * @} - */ - -/* Include DMA HAL Extension module */ -#include "stm32f1xx_hal_dma_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup DMA_Exported_Functions DMA Exported Functions - * @{ - */ - -/** @addtogroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/** @addtogroup DMA_Exported_Functions_Group2 Input and Output operation functions - * @{ - */ -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout); -void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/** @addtogroup DMA_Exported_Functions_Group3 Peripheral State functions - * @{ - */ -/* Peripheral State and Error functions ***************************************/ -HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); -uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/** - * @} - */ - -/* Private Constants -------------------------------------------------------------*/ -/** @defgroup DMA_Private_Constants DMA Private Constants - * @brief DMA private defines and constants - * @{ - */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup DMA_Private_Macros DMA Private Macros - * @brief DMA private macros - * @{ - */ - -#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000)) - -#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ - ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ - ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) - -#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ - ((STATE) == DMA_PINC_DISABLE)) - -#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ - ((STATE) == DMA_MINC_DISABLE)) - -#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ - ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ - ((SIZE) == DMA_PDATAALIGN_WORD)) - -#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ - ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ - ((SIZE) == DMA_MDATAALIGN_WORD )) - -#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ - ((MODE) == DMA_CIRCULAR)) - -#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ - ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ - ((PRIORITY) == DMA_PRIORITY_HIGH) || \ - ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DMA_Private_Functions DMA Private Functions - * @brief DMA private functions - * @{ - */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_DMA_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h deleted file mode 100644 index ca3af14..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h +++ /dev/null @@ -1,260 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_dma_ex.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of DMA HAL extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_DMA_EX_H -#define __STM32F1xx_HAL_DMA_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup DMAEx DMAEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup DMAEx_Exported_Macros DMA Extended Exported Macros - * @{ - */ -/* Interrupt & Flag management */ -#if defined (STM32F100xE) || defined (STM32F101xE) || defined (STM32F101xG) || defined (STM32F103xE) || \ - defined (STM32F103xG) || defined (STM32F105xC) || defined (STM32F107xC) -/** @defgroup DMAEx_High_density_XL_density_Product_devices DMAEx High density and XL density product devices - * @{ - */ - -/** - * @brief Returns the current DMA Channel transfer complete flag. - * @param __HANDLE__: DMA handle - * @retval The specified transfer complete flag index. - */ -#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\ - DMA_FLAG_TC5) - -/** - * @brief Returns the current DMA Channel half transfer complete flag. - * @param __HANDLE__: DMA handle - * @retval The specified half transfer complete flag index. - */ -#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\ - DMA_FLAG_HT5) - -/** - * @brief Returns the current DMA Channel transfer error flag. - * @param __HANDLE__: DMA handle - * @retval The specified transfer error flag index. - */ -#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\ - DMA_FLAG_TE5) - -/** - * @brief Get the DMA Channel pending flags. - * @param __HANDLE__: DMA handle - * @param __FLAG__: Get the specified flag. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCx: Transfer complete flag - * @arg DMA_FLAG_HTx: Half transfer complete flag - * @arg DMA_FLAG_TEx: Transfer error flag - * Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag. - * @retval The state of FLAG (SET or RESET). - */ -#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\ -(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\ - (DMA1->ISR & (__FLAG__))) - -/** - * @brief Clears the DMA Channel pending flags. - * @param __HANDLE__: DMA handle - * @param __FLAG__: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCx: Transfer complete flag - * @arg DMA_FLAG_HTx: Half transfer complete flag - * @arg DMA_FLAG_TEx: Transfer error flag - * Where x can be 1_7 or 1_5 (depending on DMA1 or DMA2) to select the DMA Channel flag. - * @retval None - */ -#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ -(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\ - (DMA1->IFCR = (__FLAG__))) - -/** - * @} - */ - -#else -/** @defgroup DMA_Low_density_Medium_density_Product_devices DMA Low density and Medium density product devices - * @{ - */ - -/** - * @brief Returns the current DMA Channel transfer complete flag. - * @param __HANDLE__: DMA handle - * @retval The specified transfer complete flag index. - */ -#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\ - DMA_FLAG_TC7) - -/** - * @brief Returns the current DMA Channel half transfer complete flag. - * @param __HANDLE__: DMA handle - * @retval The specified half transfer complete flag index. - */ -#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\ - DMA_FLAG_HT7) - -/** - * @brief Returns the current DMA Channel transfer error flag. - * @param __HANDLE__: DMA handle - * @retval The specified transfer error flag index. - */ -#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\ - DMA_FLAG_TE7) - -/** - * @brief Get the DMA Channel pending flags. - * @param __HANDLE__: DMA handle - * @param __FLAG__: Get the specified flag. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCx: Transfer complete flag - * @arg DMA_FLAG_HTx: Half transfer complete flag - * @arg DMA_FLAG_TEx: Transfer error flag - * Where x can be 1_7 to select the DMA Channel flag. - * @retval The state of FLAG (SET or RESET). - */ - -#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__)) - -/** - * @brief Clears the DMA Channel pending flags. - * @param __HANDLE__: DMA handle - * @param __FLAG__: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCx: Transfer complete flag - * @arg DMA_FLAG_HTx: Half transfer complete flag - * @arg DMA_FLAG_TEx: Transfer error flag - * Where x can be 1_7 to select the DMA Channel flag. - * @retval None - */ -#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__)) - -/** - * @} - */ - -#endif - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || */ - /* STM32F103xG || STM32F105xC || STM32F107xC */ - -#endif /* __STM32F1xx_HAL_DMA_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h deleted file mode 100644 index 5f46d66..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h +++ /dev/null @@ -1,348 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_flash.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of Flash HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_FLASH_H -#define __STM32F1xx_HAL_FLASH_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASH - * @{ - */ - -/** @addtogroup FLASH_Private_Constants - * @{ - */ -#define FLASH_TIMEOUT_VALUE ((uint32_t)50000)/* 50 s */ -/** - * @} - */ - -/** @addtogroup FLASH_Private_Macros - * @{ - */ - -#define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \ - ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \ - ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD)) - -#if defined(FLASH_ACR_LATENCY) -#define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \ - ((__LATENCY__) == FLASH_LATENCY_1) || \ - ((__LATENCY__) == FLASH_LATENCY_2)) - -#else -#define IS_FLASH_LATENCY(__LATENCY__) ((__LATENCY__) == FLASH_LATENCY_0) -#endif /* FLASH_ACR_LATENCY */ -/** - * @} - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Types FLASH Exported Types - * @{ - */ - - -/** - * @brief FLASH Procedure structure definition - */ -typedef enum -{ - FLASH_PROC_NONE = 0, - FLASH_PROC_PAGEERASE = 1, - FLASH_PROC_MASSERASE = 2, - FLASH_PROC_PROGRAMHALFWORD = 3, - FLASH_PROC_PROGRAMWORD = 4, - FLASH_PROC_PROGRAMDOUBLEWORD = 5 -} FLASH_ProcedureTypeDef; - -/** - * @brief FLASH handle Structure definition - */ -typedef struct -{ - __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */ - - __IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */ - - __IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */ - - __IO uint64_t Data; /*!< Internal variable to save data to be programmed */ - - HAL_LockTypeDef Lock; /*!< FLASH locking object */ - - __IO uint32_t ErrorCode; /*!< FLASH error code - This parameter can be a value of @ref FLASH_Error_Codes */ -} FLASH_ProcessTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Constants FLASH Exported Constants - * @{ - */ - -/** @defgroup FLASH_Error_Codes FLASH Error Codes - * @{ - */ - -#define HAL_FLASH_ERROR_NONE ((uint32_t)0x00) /*!< No error */ -#define HAL_FLASH_ERROR_PROG ((uint32_t)0x01) /*!< Programming error */ -#define HAL_FLASH_ERROR_WRP ((uint32_t)0x02) /*!< Write protection error */ -#define HAL_FLASH_ERROR_OPTV ((uint32_t)0x04) /*!< Option validity error */ - -/** - * @} - */ - -/** @defgroup FLASH_Type_Program FLASH Type Program - * @{ - */ -#define FLASH_TYPEPROGRAM_HALFWORD ((uint32_t)0x01) /*!<Program a half-word (16-bit) at a specified address.*/ -#define FLASH_TYPEPROGRAM_WORD ((uint32_t)0x02) /*!<Program a word (32-bit) at a specified address.*/ -#define FLASH_TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03) /*!<Program a double word (64-bit) at a specified address*/ - -/** - * @} - */ - -#if defined(FLASH_ACR_LATENCY) -/** @defgroup FLASH_Latency FLASH Latency - * @{ - */ -#define FLASH_LATENCY_0 ((uint32_t)0x00000000) /*!< FLASH Zero Latency cycle */ -#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One Latency cycle */ -#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_1 /*!< FLASH Two Latency cycles */ - -/** - * @} - */ - -#else -/** @defgroup FLASH_Latency FLASH Latency - * @{ - */ -#define FLASH_LATENCY_0 ((uint32_t)0x00000000) /*!< FLASH Zero Latency cycle */ - -/** - * @} - */ - -#endif /* FLASH_ACR_LATENCY */ -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/** @defgroup FLASH_Exported_Macros FLASH Exported Macros - * @brief macros to control FLASH features - * @{ - */ - -/** @defgroup FLASH_Half_Cycle FLASH Half Cycle - * @brief macros to handle FLASH half cycle - * @{ - */ - -/** - * @brief Enable the FLASH half cycle access. - * @note half cycle access can only be used with a low-frequency clock of less than - 8 MHz that can be obtained with the use of HSI or HSE but not of PLL. - * @retval None - */ -#define __HAL_FLASH_HALF_CYCLE_ACCESS_ENABLE() (FLASH->ACR |= FLASH_ACR_HLFCYA) - -/** - * @brief Disable the FLASH half cycle access. - * @note half cycle access can only be used with a low-frequency clock of less than - 8 MHz that can be obtained with the use of HSI or HSE but not of PLL. - * @retval None - */ -#define __HAL_FLASH_HALF_CYCLE_ACCESS_DISABLE() (FLASH->ACR &= (~FLASH_ACR_HLFCYA)) - -/** - * @} - */ - -#if defined(FLASH_ACR_LATENCY) -/** @defgroup FLASH_EM_Latency FLASH Latency - * @brief macros to handle FLASH Latency - * @{ - */ - -/** - * @brief Set the FLASH Latency. - * @param __LATENCY__ FLASH Latency - * The value of this parameter depend on device used within the same series - * @retval None - */ -#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__)) - - -/** - * @brief Get the FLASH Latency. - * @retval FLASH Latency - * The value of this parameter depend on device used within the same series - */ -#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) - -/** - * @} - */ - -#endif /* FLASH_ACR_LATENCY */ -/** @defgroup FLASH_Prefetch FLASH Prefetch - * @brief macros to handle FLASH Prefetch buffer - * @{ - */ -/** - * @brief Enable the FLASH prefetch buffer. - * @retval None - */ -#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTBE) - -/** - * @brief Disable the FLASH prefetch buffer. - * @retval None - */ -#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTBE)) - -/** - * @} - */ - -/** - * @} - */ - -/* Include FLASH HAL Extended module */ -#include "stm32f1xx_hal_flash_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FLASH_Exported_Functions - * @{ - */ - -/** @addtogroup FLASH_Exported_Functions_Group1 - * @{ - */ -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); -HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); - -/* FLASH IRQ handler function */ -void HAL_FLASH_IRQHandler(void); -/* Callbacks in non blocking modes */ -void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); -void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); - -/** - * @} - */ - -/** @addtogroup FLASH_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ***********************************************/ -HAL_StatusTypeDef HAL_FLASH_Unlock(void); -HAL_StatusTypeDef HAL_FLASH_Lock(void); -HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); -HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); -HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); - -/** - * @} - */ - -/** @addtogroup FLASH_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State and Error functions ***************************************/ -uint32_t HAL_FLASH_GetError(void); - -/** - * @} - */ - -/** - * @} - */ - -/* Private function -------------------------------------------------*/ -/** @addtogroup FLASH_Private_Functions - * @{ - */ -void FLASH_PageErase(uint32_t PageAddress); -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); -#if defined(FLASH_BANK2_END) -HAL_StatusTypeDef FLASH_WaitForLastOperationBank2(uint32_t Timeout); -#endif /* FLASH_BANK2_END */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_FLASH_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h deleted file mode 100644 index 41375db..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h +++ /dev/null @@ -1,804 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_flash_ex.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of Flash HAL Extended module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_FLASH_EX_H -#define __STM32F1xx_HAL_FLASH_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASHEx - * @{ - */ - -/** @addtogroup FLASHEx_Private_Constants - * @{ - */ - -#define FLASH_SIZE_DATA_REGISTER ((uint32_t)0x1FFFF7E0) -#define OBR_REG_INDEX ((uint32_t)1) -#define SR_FLAG_MASK ((uint32_t)(FLASH_SR_BSY | FLASH_SR_PGERR | FLASH_SR_WRPRTERR | FLASH_SR_EOP)) - -/** - * @} - */ - -/** @addtogroup FLASHEx_Private_Macros - * @{ - */ - -#define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || ((VALUE) == FLASH_TYPEERASE_MASSERASE)) - -#define IS_OPTIONBYTE(VALUE) (((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA))) - -#define IS_WRPSTATE(VALUE) (((VALUE) == OB_WRPSTATE_DISABLE) || ((VALUE) == OB_WRPSTATE_ENABLE)) - -#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) || ((LEVEL) == OB_RDP_LEVEL_1)) - -#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == OB_DATA_ADDRESS_DATA0) || ((ADDRESS) == OB_DATA_ADDRESS_DATA1)) - -#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) - -#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST)) - -#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST)) - -#if defined(FLASH_BANK2_END) -#define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET)) -#endif /* FLASH_BANK2_END */ - -/* Low Density */ -#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6)) -#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFF) : \ - ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08003FFF)) -#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */ - -/* Medium Density */ -#if (defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)) -#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFF) : \ - (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFF) : \ - (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFF) : \ - ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08003FFF)))) -#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/ - -/* High Density */ -#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE)) -#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x200) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0807FFFF) : \ - (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x180) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0805FFFF) : \ - ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFF))) -#endif /* STM32F100xE || STM32F101xE || STM32F103xE */ - -/* XL Density */ -#if defined(FLASH_BANK2_END) -#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x400) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x080FFFFF) : \ - ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x080BFFFF)) -#endif /* FLASH_BANK2_END */ - -/* Connectivity Line */ -#if (defined(STM32F105xC) || defined(STM32F107xC)) -#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFF) : \ - (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFF) : \ - ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFF))) -#endif /* STM32F105xC || STM32F107xC */ - -#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000)) - -#if defined(FLASH_BANK2_END) -#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \ - ((BANK) == FLASH_BANK_2) || \ - ((BANK) == FLASH_BANK_BOTH)) -#else -#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1)) -#endif /* FLASH_BANK2_END */ - -/* Low Density */ -#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6)) -#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20) ? \ - ((ADDRESS) <= FLASH_BANK1_END) : ((ADDRESS) <= 0x08003FFF))) - -#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */ - -/* Medium Density */ -#if (defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)) -#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80) ? \ - ((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40) ? \ - ((ADDRESS) <= 0x0800FFFF) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20) ? \ - ((ADDRESS) <= 0x08007FFF) : ((ADDRESS) <= 0x08003FFF))))) - -#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/ - -/* High Density */ -#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE)) -#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x200) ? \ - ((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x180) ? \ - ((ADDRESS) <= 0x0805FFFF) : ((ADDRESS) <= 0x0803FFFF)))) - -#endif /* STM32F100xE || STM32F101xE || STM32F103xE */ - -/* XL Density */ -#if defined(FLASH_BANK2_END) -#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x400) ? \ - ((ADDRESS) <= FLASH_BANK2_END) : ((ADDRESS) <= 0x080BFFFF))) - -#endif /* FLASH_BANK2_END */ - -/* Connectivity Line */ -#if (defined(STM32F105xC) || defined(STM32F107xC)) -#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100) ? \ - ((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80) ? \ - ((ADDRESS) <= 0x0801FFFF) : ((ADDRESS) <= 0x0800FFFF)))) - -#endif /* STM32F105xC || STM32F107xC */ - -/** - * @} - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types - * @{ - */ - -/** - * @brief FLASH Erase structure definition - */ -typedef struct -{ - uint32_t TypeErase; /*!< TypeErase: Mass erase or page erase. - This parameter can be a value of @ref FLASHEx_Type_Erase */ - - uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled. - This parameter must be a value of @ref FLASHEx_Banks */ - - uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled - This parameter must be a number between Min_Data = 0x08000000 and Max_Data = FLASH_BANKx_END - (x = 1 or 2 depending on devices)*/ - - uint32_t NbPages; /*!< NbPages: Number of pagess to be erased. - This parameter must be a value between Min_Data = 1 and Max_Data = (max number of pages - value of initial page)*/ - -} FLASH_EraseInitTypeDef; - -/** - * @brief FLASH Options bytes program structure definition - */ -typedef struct -{ - uint32_t OptionType; /*!< OptionType: Option byte to be configured. - This parameter can be a value of @ref FLASHEx_OB_Type */ - - uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation. - This parameter can be a value of @ref FLASHEx_OB_WRP_State */ - - uint32_t WRPPage; /*!< WRPPage: specifies the page(s) to be write protected - This parameter can be a value of @ref FLASHEx_OB_Write_Protection */ - - uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors. - This parameter must be a value of @ref FLASHEx_Banks */ - - uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level.. - This parameter can be a value of @ref FLASHEx_OB_Read_Protection */ - -#if defined(FLASH_BANK2_END) - uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte: - IWDG / STOP / STDBY / BOOT1 - This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP, - @ref FLASHEx_OB_nRST_STDBY, @ref FLASHEx_OB_BOOT1 */ -#else - uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte: - IWDG / STOP / STDBY - This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP, - @ref FLASHEx_OB_nRST_STDBY */ -#endif /* FLASH_BANK2_END */ - - uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be programmed - This parameter can be a value of @ref FLASHEx_OB_Data_Address */ - - uint8_t DATAData; /*!< DATAData: Data to be stored in the option byte DATA - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ -} FLASH_OBProgramInitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants - * @{ - */ - -/** @defgroup FLASHEx_Constants FLASH Constants - * @{ - */ - -/** @defgroup FLASHEx_Page_Size Page Size - * @{ - */ -#if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6) || defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)) -#define FLASH_PAGE_SIZE ((uint32_t)0x400) -#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */ - /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */ - -#if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)) -#define FLASH_PAGE_SIZE ((uint32_t)0x800) -#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */ - /* STM32F101xG || STM32F103xG */ - /* STM32F105xC || STM32F107xC */ - -/** - * @} - */ - -/** @defgroup FLASHEx_Type_Erase Type Erase - * @{ - */ -#define FLASH_TYPEERASE_PAGES ((uint32_t)0x00) /*!<Pages erase only*/ -#define FLASH_TYPEERASE_MASSERASE ((uint32_t)0x02) /*!<Flash mass erase activation*/ - -/** - * @} - */ - -/** @defgroup FLASHEx_Banks Banks - * @{ - */ -#if defined(FLASH_BANK2_END) -#define FLASH_BANK_1 ((uint32_t)1) /*!< Bank 1 */ -#define FLASH_BANK_2 ((uint32_t)2) /*!< Bank 2 */ -#define FLASH_BANK_BOTH ((uint32_t)FLASH_BANK_1 | FLASH_BANK_2) /*!< Bank1 and Bank2 */ - -#else -#define FLASH_BANK_1 ((uint32_t)1) /*!< Bank 1 */ -#endif -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup FLASHEx_OptionByte_Constants Option Byte Constants - * @{ - */ - -/** @defgroup FLASHEx_OB_Type Option Bytes Type - * @{ - */ -#define OPTIONBYTE_WRP ((uint32_t)0x01) /*!<WRP option byte configuration*/ -#define OPTIONBYTE_RDP ((uint32_t)0x02) /*!<RDP option byte configuration*/ -#define OPTIONBYTE_USER ((uint32_t)0x04) /*!<USER option byte configuration*/ -#define OPTIONBYTE_DATA ((uint32_t)0x08) /*!<DATA option byte configuration*/ - -/** - * @} - */ - -/** @defgroup FLASHEx_OB_WRP_State Option Byte WRP State - * @{ - */ -#define OB_WRPSTATE_DISABLE ((uint32_t)0x00) /*!<Disable the write protection of the desired pages*/ -#define OB_WRPSTATE_ENABLE ((uint32_t)0x01) /*!<Enable the write protection of the desired pagess*/ - -/** - * @} - */ - -/** @defgroup FLASHEx_OB_Write_Protection Option Bytes Write Protection - * @{ - */ -/* STM32 Low and Medium density devices */ -#if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6) \ - || defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) \ - || defined(STM32F103xB) -#define OB_WRP_PAGES0TO3 ((uint32_t)0x00000001) /*!< Write protection of page 0 to 3 */ -#define OB_WRP_PAGES4TO7 ((uint32_t)0x00000002) /*!< Write protection of page 4 to 7 */ -#define OB_WRP_PAGES8TO11 ((uint32_t)0x00000004) /*!< Write protection of page 8 to 11 */ -#define OB_WRP_PAGES12TO15 ((uint32_t)0x00000008) /*!< Write protection of page 12 to 15 */ -#define OB_WRP_PAGES16TO19 ((uint32_t)0x00000010) /*!< Write protection of page 16 to 19 */ -#define OB_WRP_PAGES20TO23 ((uint32_t)0x00000020) /*!< Write protection of page 20 to 23 */ -#define OB_WRP_PAGES24TO27 ((uint32_t)0x00000040) /*!< Write protection of page 24 to 27 */ -#define OB_WRP_PAGES28TO31 ((uint32_t)0x00000080) /*!< Write protection of page 28 to 31 */ -#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */ - /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */ - -/* STM32 Medium-density devices */ -#if defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB) -#define OB_WRP_PAGES32TO35 ((uint32_t)0x00000100) /*!< Write protection of page 32 to 35 */ -#define OB_WRP_PAGES36TO39 ((uint32_t)0x00000200) /*!< Write protection of page 36 to 39 */ -#define OB_WRP_PAGES40TO43 ((uint32_t)0x00000400) /*!< Write protection of page 40 to 43 */ -#define OB_WRP_PAGES44TO47 ((uint32_t)0x00000800) /*!< Write protection of page 44 to 47 */ -#define OB_WRP_PAGES48TO51 ((uint32_t)0x00001000) /*!< Write protection of page 48 to 51 */ -#define OB_WRP_PAGES52TO55 ((uint32_t)0x00002000) /*!< Write protection of page 52 to 55 */ -#define OB_WRP_PAGES56TO59 ((uint32_t)0x00004000) /*!< Write protection of page 56 to 59 */ -#define OB_WRP_PAGES60TO63 ((uint32_t)0x00008000) /*!< Write protection of page 60 to 63 */ -#define OB_WRP_PAGES64TO67 ((uint32_t)0x00010000) /*!< Write protection of page 64 to 67 */ -#define OB_WRP_PAGES68TO71 ((uint32_t)0x00020000) /*!< Write protection of page 68 to 71 */ -#define OB_WRP_PAGES72TO75 ((uint32_t)0x00040000) /*!< Write protection of page 72 to 75 */ -#define OB_WRP_PAGES76TO79 ((uint32_t)0x00080000) /*!< Write protection of page 76 to 79 */ -#define OB_WRP_PAGES80TO83 ((uint32_t)0x00100000) /*!< Write protection of page 80 to 83 */ -#define OB_WRP_PAGES84TO87 ((uint32_t)0x00200000) /*!< Write protection of page 84 to 87 */ -#define OB_WRP_PAGES88TO91 ((uint32_t)0x00400000) /*!< Write protection of page 88 to 91 */ -#define OB_WRP_PAGES92TO95 ((uint32_t)0x00800000) /*!< Write protection of page 92 to 95 */ -#define OB_WRP_PAGES96TO99 ((uint32_t)0x01000000) /*!< Write protection of page 96 to 99 */ -#define OB_WRP_PAGES100TO103 ((uint32_t)0x02000000) /*!< Write protection of page 100 to 103 */ -#define OB_WRP_PAGES104TO107 ((uint32_t)0x04000000) /*!< Write protection of page 104 to 107 */ -#define OB_WRP_PAGES108TO111 ((uint32_t)0x08000000) /*!< Write protection of page 108 to 111 */ -#define OB_WRP_PAGES112TO115 ((uint32_t)0x10000000) /*!< Write protection of page 112 to 115 */ -#define OB_WRP_PAGES116TO119 ((uint32_t)0x20000000) /*!< Write protection of page 115 to 119 */ -#define OB_WRP_PAGES120TO123 ((uint32_t)0x40000000) /*!< Write protection of page 120 to 123 */ -#define OB_WRP_PAGES124TO127 ((uint32_t)0x80000000) /*!< Write protection of page 124 to 127 */ -#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */ - - -/* STM32 High-density, XL-density and Connectivity line devices */ -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE) \ - || defined(STM32F101xG) || defined(STM32F103xG) \ - || defined(STM32F105xC) || defined(STM32F107xC) -#define OB_WRP_PAGES0TO1 ((uint32_t)0x00000001) /*!< Write protection of page 0 TO 1 */ -#define OB_WRP_PAGES2TO3 ((uint32_t)0x00000002) /*!< Write protection of page 2 TO 3 */ -#define OB_WRP_PAGES4TO5 ((uint32_t)0x00000004) /*!< Write protection of page 4 TO 5 */ -#define OB_WRP_PAGES6TO7 ((uint32_t)0x00000008) /*!< Write protection of page 6 TO 7 */ -#define OB_WRP_PAGES8TO9 ((uint32_t)0x00000010) /*!< Write protection of page 8 TO 9 */ -#define OB_WRP_PAGES10TO11 ((uint32_t)0x00000020) /*!< Write protection of page 10 TO 11 */ -#define OB_WRP_PAGES12TO13 ((uint32_t)0x00000040) /*!< Write protection of page 12 TO 13 */ -#define OB_WRP_PAGES14TO15 ((uint32_t)0x00000080) /*!< Write protection of page 14 TO 15 */ -#define OB_WRP_PAGES16TO17 ((uint32_t)0x00000100) /*!< Write protection of page 16 TO 17 */ -#define OB_WRP_PAGES18TO19 ((uint32_t)0x00000200) /*!< Write protection of page 18 TO 19 */ -#define OB_WRP_PAGES20TO21 ((uint32_t)0x00000400) /*!< Write protection of page 20 TO 21 */ -#define OB_WRP_PAGES22TO23 ((uint32_t)0x00000800) /*!< Write protection of page 22 TO 23 */ -#define OB_WRP_PAGES24TO25 ((uint32_t)0x00001000) /*!< Write protection of page 24 TO 25 */ -#define OB_WRP_PAGES26TO27 ((uint32_t)0x00002000) /*!< Write protection of page 26 TO 27 */ -#define OB_WRP_PAGES28TO29 ((uint32_t)0x00004000) /*!< Write protection of page 28 TO 29 */ -#define OB_WRP_PAGES30TO31 ((uint32_t)0x00008000) /*!< Write protection of page 30 TO 31 */ -#define OB_WRP_PAGES32TO33 ((uint32_t)0x00010000) /*!< Write protection of page 32 TO 33 */ -#define OB_WRP_PAGES34TO35 ((uint32_t)0x00020000) /*!< Write protection of page 34 TO 35 */ -#define OB_WRP_PAGES36TO37 ((uint32_t)0x00040000) /*!< Write protection of page 36 TO 37 */ -#define OB_WRP_PAGES38TO39 ((uint32_t)0x00080000) /*!< Write protection of page 38 TO 39 */ -#define OB_WRP_PAGES40TO41 ((uint32_t)0x00100000) /*!< Write protection of page 40 TO 41 */ -#define OB_WRP_PAGES42TO43 ((uint32_t)0x00200000) /*!< Write protection of page 42 TO 43 */ -#define OB_WRP_PAGES44TO45 ((uint32_t)0x00400000) /*!< Write protection of page 44 TO 45 */ -#define OB_WRP_PAGES46TO47 ((uint32_t)0x00800000) /*!< Write protection of page 46 TO 47 */ -#define OB_WRP_PAGES48TO49 ((uint32_t)0x01000000) /*!< Write protection of page 48 TO 49 */ -#define OB_WRP_PAGES50TO51 ((uint32_t)0x02000000) /*!< Write protection of page 50 TO 51 */ -#define OB_WRP_PAGES52TO53 ((uint32_t)0x04000000) /*!< Write protection of page 52 TO 53 */ -#define OB_WRP_PAGES54TO55 ((uint32_t)0x08000000) /*!< Write protection of page 54 TO 55 */ -#define OB_WRP_PAGES56TO57 ((uint32_t)0x10000000) /*!< Write protection of page 56 TO 57 */ -#define OB_WRP_PAGES58TO59 ((uint32_t)0x20000000) /*!< Write protection of page 58 TO 59 */ -#define OB_WRP_PAGES60TO61 ((uint32_t)0x40000000) /*!< Write protection of page 60 TO 61 */ -#define OB_WRP_PAGES62TO127 ((uint32_t)0x80000000) /*!< Write protection of page 62 TO 127 */ -#define OB_WRP_PAGES62TO255 ((uint32_t)0x80000000) /*!< Write protection of page 62 TO 255 */ -#define OB_WRP_PAGES62TO511 ((uint32_t)0x80000000) /*!< Write protection of page 62 TO 511 */ -#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */ - /* STM32F101xG || STM32F103xG */ - /* STM32F105xC || STM32F107xC */ - -#define OB_WRP_ALLPAGES ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Pages */ - -/* Low Density */ -#if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6) -#define OB_WRP_PAGES0TO31MASK ((uint32_t)0x000000FF) -#endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */ - -/* Medium Density */ -#if defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB) -#define OB_WRP_PAGES0TO31MASK ((uint32_t)0x000000FF) -#define OB_WRP_PAGES32TO63MASK ((uint32_t)0x0000FF00) -#define OB_WRP_PAGES64TO95MASK ((uint32_t)0x00FF0000) -#define OB_WRP_PAGES96TO127MASK ((uint32_t)0xFF000000) -#endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/ - -/* High Density */ -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE) -#define OB_WRP_PAGES0TO15MASK ((uint32_t)0x000000FF) -#define OB_WRP_PAGES16TO31MASK ((uint32_t)0x0000FF00) -#define OB_WRP_PAGES32TO47MASK ((uint32_t)0x00FF0000) -#define OB_WRP_PAGES48TO255MASK ((uint32_t)0xFF000000) -#endif /* STM32F100xE || STM32F101xE || STM32F103xE */ - -/* XL Density */ -#if defined(STM32F101xG) || defined(STM32F103xG) -#define OB_WRP_PAGES0TO15MASK ((uint32_t)0x000000FF) -#define OB_WRP_PAGES16TO31MASK ((uint32_t)0x0000FF00) -#define OB_WRP_PAGES32TO47MASK ((uint32_t)0x00FF0000) -#define OB_WRP_PAGES48TO511MASK ((uint32_t)0xFF000000) -#endif /* STM32F101xG || STM32F103xG */ - -/* Connectivity line devices */ -#if defined(STM32F105xC) || defined(STM32F107xC) -#define OB_WRP_PAGES0TO15MASK ((uint32_t)0x000000FF) -#define OB_WRP_PAGES16TO31MASK ((uint32_t)0x0000FF00) -#define OB_WRP_PAGES32TO47MASK ((uint32_t)0x00FF0000) -#define OB_WRP_PAGES48TO127MASK ((uint32_t)0xFF000000) -#endif /* STM32F105xC || STM32F107xC */ - -/** - * @} - */ - -/** @defgroup FLASHEx_OB_Read_Protection Option Byte Read Protection - * @{ - */ -#define OB_RDP_LEVEL_0 ((uint8_t)0xA5) -#define OB_RDP_LEVEL_1 ((uint8_t)0x00) -/** - * @} - */ - -/** @defgroup FLASHEx_OB_IWatchdog Option Byte IWatchdog - * @{ - */ -#define OB_IWDG_SW ((uint16_t)0x0001) /*!< Software IWDG selected */ -#define OB_IWDG_HW ((uint16_t)0x0000) /*!< Hardware IWDG selected */ -/** - * @} - */ - -/** @defgroup FLASHEx_OB_nRST_STOP Option Byte nRST STOP - * @{ - */ -#define OB_STOP_NO_RST ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */ -#define OB_STOP_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */ -/** - * @} - */ - -/** @defgroup FLASHEx_OB_nRST_STDBY Option Byte nRST STDBY - * @{ - */ -#define OB_STDBY_NO_RST ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */ -#define OB_STDBY_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */ -/** - * @} - */ - -#if defined(FLASH_BANK2_END) -/** @defgroup FLASHEx_OB_BOOT1 Option Byte BOOT1 - * @{ - */ -#define OB_BOOT1_RESET ((uint16_t)0x0000) /*!< BOOT1 Reset */ -#define OB_BOOT1_SET ((uint16_t)0x0008) /*!< BOOT1 Set */ -/** - * @} - */ -#endif /* FLASH_BANK2_END */ - -/** @defgroup FLASHEx_OB_Data_Address Option Byte Data Address - * @{ - */ -#define OB_DATA_ADDRESS_DATA0 ((uint32_t)0x1FFFF804) -#define OB_DATA_ADDRESS_DATA1 ((uint32_t)0x1FFFF806) -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup FLASHEx_Constants - * @{ - */ - -/** @defgroup FLASH_Flag_definition Flag definition - * @brief Flag definition - * @{ - */ -#if defined(FLASH_BANK2_END) - #define FLASH_FLAG_BSY FLASH_FLAG_BSY_BANK1 /*!< FLASH Bank1 Busy flag */ - #define FLASH_FLAG_PGERR FLASH_FLAG_PGERR_BANK1 /*!< FLASH Bank1 Programming error flag */ - #define FLASH_FLAG_WRPERR FLASH_FLAG_WRPERR_BANK1 /*!< FLASH Bank1 Write protected error flag */ - #define FLASH_FLAG_EOP FLASH_FLAG_EOP_BANK1 /*!< FLASH Bank1 End of Operation flag */ - - #define FLASH_FLAG_BSY_BANK1 FLASH_SR_BSY /*!< FLASH Bank1 Busy flag */ - #define FLASH_FLAG_PGERR_BANK1 FLASH_SR_PGERR /*!< FLASH Bank1 Programming error flag */ - #define FLASH_FLAG_WRPERR_BANK1 FLASH_SR_WRPRTERR /*!< FLASH Bank1 Write protected error flag */ - #define FLASH_FLAG_EOP_BANK1 FLASH_SR_EOP /*!< FLASH Bank1 End of Operation flag */ - - #define FLASH_FLAG_BSY_BANK2 (FLASH_SR2_BSY << 16) /*!< FLASH Bank2 Busy flag */ - #define FLASH_FLAG_PGERR_BANK2 (FLASH_SR2_PGERR << 16) /*!< FLASH Bank2 Programming error flag */ - #define FLASH_FLAG_WRPERR_BANK2 (FLASH_SR2_WRPRTERR << 16) /*!< FLASH Bank2 Write protected error flag */ - #define FLASH_FLAG_EOP_BANK2 (FLASH_SR2_EOP << 16) /*!< FLASH Bank2 End of Operation flag */ - -#else - - #define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ - #define FLASH_FLAG_PGERR FLASH_SR_PGERR /*!< FLASH Programming error flag */ - #define FLASH_FLAG_WRPERR FLASH_SR_WRPRTERR /*!< FLASH Write protected error flag */ - #define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */ - -#endif - #define FLASH_FLAG_OPTVERR ((OBR_REG_INDEX << 8 | FLASH_OBR_OPTERR)) /*!< Option Byte Error */ -/** - * @} - */ - -/** @defgroup FLASH_Interrupt_definition Interrupt definition - * @brief FLASH Interrupt definition - * @{ - */ -#if defined(FLASH_BANK2_END) - #define FLASH_IT_EOP FLASH_IT_EOP_BANK1 /*!< End of FLASH Operation Interrupt source Bank1 */ - #define FLASH_IT_ERR FLASH_IT_ERR_BANK1 /*!< Error Interrupt source Bank1 */ - - #define FLASH_IT_EOP_BANK1 FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source Bank1 */ - #define FLASH_IT_ERR_BANK1 FLASH_CR_ERRIE /*!< Error Interrupt source Bank1 */ - - #define FLASH_IT_EOP_BANK2 (FLASH_CR2_EOPIE << 16) /*!< End of FLASH Operation Interrupt source Bank2 */ - #define FLASH_IT_ERR_BANK2 (FLASH_CR2_ERRIE << 16) /*!< Error Interrupt source Bank2 */ - -#else - - #define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */ - #define FLASH_IT_ERR FLASH_CR_ERRIE /*!< Error Interrupt source */ - -#endif -/** - * @} - */ - -/** - * @} - */ - - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup FLASHEx_Exported_Macros FLASHEx Exported Macros - * @{ - */ - -/** @defgroup FLASH_Interrupt Interrupt - * @brief macros to handle FLASH interrupts - * @{ - */ - -#if defined(FLASH_BANK2_END) -/** - * @brief Enable the specified FLASH interrupt. - * @param __INTERRUPT__ FLASH interrupt - * This parameter can be any combination of the following values: - * @arg @ref FLASH_IT_EOP_BANK1 End of FLASH Operation Interrupt on bank1 - * @arg @ref FLASH_IT_ERR_BANK1 Error Interrupt on bank1 - * @arg @ref FLASH_IT_EOP_BANK2 End of FLASH Operation Interrupt on bank2 - * @arg @ref FLASH_IT_ERR_BANK2 Error Interrupt on bank2 - * @retval none - */ -#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { \ - /* Enable Bank1 IT */ \ - SET_BIT(FLASH->CR, ((__INTERRUPT__) & 0x0000FFFF)); \ - /* Enable Bank2 IT */ \ - SET_BIT(FLASH->CR2, ((__INTERRUPT__) >> 16)); \ - } while(0) - -/** - * @brief Disable the specified FLASH interrupt. - * @param __INTERRUPT__ FLASH interrupt - * This parameter can be any combination of the following values: - * @arg @ref FLASH_IT_EOP_BANK1 End of FLASH Operation Interrupt on bank1 - * @arg @ref FLASH_IT_ERR_BANK1 Error Interrupt on bank1 - * @arg @ref FLASH_IT_EOP_BANK2 End of FLASH Operation Interrupt on bank2 - * @arg @ref FLASH_IT_ERR_BANK2 Error Interrupt on bank2 - * @retval none - */ -#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { \ - /* Disable Bank1 IT */ \ - CLEAR_BIT(FLASH->CR, ((__INTERRUPT__) & 0x0000FFFF)); \ - /* Disable Bank2 IT */ \ - CLEAR_BIT(FLASH->CR2, ((__INTERRUPT__) >> 16)); \ - } while(0) - -/** - * @brief Get the specified FLASH flag status. - * @param __FLAG__ specifies the FLASH flag to check. - * This parameter can be one of the following values: - * @arg @ref FLASH_FLAG_EOP_BANK1 FLASH End of Operation flag on bank1 - * @arg @ref FLASH_FLAG_WRPERR_BANK1 FLASH Write protected error flag on bank1 - * @arg @ref FLASH_FLAG_PGERR_BANK1 FLASH Programming error flag on bank1 - * @arg @ref FLASH_FLAG_BSY_BANK1 FLASH Busy flag on bank1 - * @arg @ref FLASH_FLAG_EOP_BANK2 FLASH End of Operation flag on bank2 - * @arg @ref FLASH_FLAG_WRPERR_BANK2 FLASH Write protected error flag on bank2 - * @arg @ref FLASH_FLAG_PGERR_BANK2 FLASH Programming error flag on bank2 - * @arg @ref FLASH_FLAG_BSY_BANK2 FLASH Busy flag on bank2 - * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match - * @retval The new state of __FLAG__ (SET or RESET). - */ -#define __HAL_FLASH_GET_FLAG(__FLAG__) (((__FLAG__) == FLASH_FLAG_OPTVERR) ? \ - (FLASH->OBR & FLASH_OBR_OPTERR) : \ - ((((__FLAG__) & SR_FLAG_MASK) != RESET)? \ - (FLASH->SR & ((__FLAG__) & SR_FLAG_MASK)) : \ - (FLASH->SR2 & ((__FLAG__) >> 16)))) - -/** - * @brief Clear the specified FLASH flag. - * @param __FLAG__ specifies the FLASH flags to clear. - * This parameter can be any combination of the following values: - * @arg @ref FLASH_FLAG_EOP_BANK1 FLASH End of Operation flag on bank1 - * @arg @ref FLASH_FLAG_WRPERR_BANK1 FLASH Write protected error flag on bank1 - * @arg @ref FLASH_FLAG_PGERR_BANK1 FLASH Programming error flag on bank1 - * @arg @ref FLASH_FLAG_BSY_BANK1 FLASH Busy flag on bank1 - * @arg @ref FLASH_FLAG_EOP_BANK2 FLASH End of Operation flag on bank2 - * @arg @ref FLASH_FLAG_WRPERR_BANK2 FLASH Write protected error flag on bank2 - * @arg @ref FLASH_FLAG_PGERR_BANK2 FLASH Programming error flag on bank2 - * @arg @ref FLASH_FLAG_BSY_BANK2 FLASH Busy flag on bank2 - * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match - * @retval none - */ -#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { \ - /* Clear FLASH_FLAG_OPTVERR flag */ \ - if ((__FLAG__) == FLASH_FLAG_OPTVERR) \ - { \ - CLEAR_BIT(FLASH->OBR, FLASH_OBR_OPTERR); \ - } \ - else { \ - /* Clear Flag in Bank1 */ \ - if (((__FLAG__) & SR_FLAG_MASK) != RESET) \ - { \ - FLASH->SR = ((__FLAG__) & SR_FLAG_MASK); \ - } \ - /* Clear Flag in Bank2 */ \ - if (((__FLAG__) >> 16) != RESET) \ - { \ - FLASH->SR2 = ((__FLAG__) >> 16); \ - } \ - } \ - } while(0) -#else -/** - * @brief Enable the specified FLASH interrupt. - * @param __INTERRUPT__ FLASH interrupt - * This parameter can be any combination of the following values: - * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt - * @arg @ref FLASH_IT_ERR Error Interrupt - * @retval none - */ -#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__)) - -/** - * @brief Disable the specified FLASH interrupt. - * @param __INTERRUPT__ FLASH interrupt - * This parameter can be any combination of the following values: - * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt - * @arg @ref FLASH_IT_ERR Error Interrupt - * @retval none - */ -#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(__INTERRUPT__)) - -/** - * @brief Get the specified FLASH flag status. - * @param __FLAG__ specifies the FLASH flag to check. - * This parameter can be one of the following values: - * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag - * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag - * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag - * @arg @ref FLASH_FLAG_BSY FLASH Busy flag - * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match - * @retval The new state of __FLAG__ (SET or RESET). - */ -#define __HAL_FLASH_GET_FLAG(__FLAG__) (((__FLAG__) == FLASH_FLAG_OPTVERR) ? \ - (FLASH->OBR & FLASH_OBR_OPTERR) : \ - (FLASH->SR & (__FLAG__))) -/** - * @brief Clear the specified FLASH flag. - * @param __FLAG__ specifies the FLASH flags to clear. - * This parameter can be any combination of the following values: - * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag - * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag - * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag - * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match - * @retval none - */ -#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { \ - /* Clear FLASH_FLAG_OPTVERR flag */ \ - if ((__FLAG__) == FLASH_FLAG_OPTVERR) \ - { \ - CLEAR_BIT(FLASH->OBR, FLASH_OBR_OPTERR); \ - } \ - else { \ - /* Clear Flag in Bank1 */ \ - FLASH->SR = (__FLAG__); \ - } \ - } while(0) - -#endif - -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FLASHEx_Exported_Functions - * @{ - */ - -/** @addtogroup FLASHEx_Exported_Functions_Group1 - * @{ - */ -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError); -HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); - -/** - * @} - */ - -/** @addtogroup FLASHEx_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ***********************************************/ -HAL_StatusTypeDef HAL_FLASHEx_OBErase(void); -HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); -void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); -uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_FLASH_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h deleted file mode 100644 index e585410..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h +++ /dev/null @@ -1,324 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_gpio.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of GPIO HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_GPIO_H -#define __STM32F1xx_HAL_GPIO_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup GPIO - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Types GPIO Exported Types - * @{ - */ - -/** - * @brief GPIO Init structure definition - */ -typedef struct -{ - uint32_t Pin; /*!< Specifies the GPIO pins to be configured. - This parameter can be any value of @ref GPIO_pins_define */ - - uint32_t Mode; /*!< Specifies the operating mode for the selected pins. - This parameter can be a value of @ref GPIO_mode_define */ - - uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. - This parameter can be a value of @ref GPIO_pull_define */ - - uint32_t Speed; /*!< Specifies the speed for the selected pins. - This parameter can be a value of @ref GPIO_speed_define */ -}GPIO_InitTypeDef; - -/** - * @brief GPIO Bit SET and Bit RESET enumeration - */ -typedef enum -{ - GPIO_PIN_RESET = 0, - GPIO_PIN_SET -}GPIO_PinState; - -/** - * @} - */ - - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup GPIO_Exported_Constants GPIO Exported Constants - * @{ - */ - -/** @defgroup GPIO_pins_define GPIO pins define - * @{ - */ -#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ -#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ -#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ -#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ -#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ -#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ -#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ -#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ -#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ -#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ -#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ -#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ -#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ -#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ -#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ -#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ -#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ - -#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */ -/** - * @} - */ - - -/** @defgroup GPIO_mode_define GPIO mode define - * @brief GPIO Configuration Mode - * Elements values convention: 0xX0yz00YZ - * - X : GPIO mode or EXTI Mode - * - y : External IT or Event trigger detection - * - z : IO configuration on External IT or Event - * - Y : Output type (Push Pull or Open Drain) - * - Z : IO Direction mode (Input, Output, Alternate or Analog) - * @{ - */ -#define GPIO_MODE_INPUT ((uint32_t)0x00000000) /*!< Input Floating Mode */ -#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001) /*!< Output Push Pull Mode */ -#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011) /*!< Output Open Drain Mode */ -#define GPIO_MODE_AF_PP ((uint32_t)0x00000002) /*!< Alternate Function Push Pull Mode */ -#define GPIO_MODE_AF_OD ((uint32_t)0x00000012) /*!< Alternate Function Open Drain Mode */ -#define GPIO_MODE_AF_INPUT GPIO_MODE_INPUT /*!< Alternate Function Input Mode */ - -#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */ - -#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000) /*!< External Interrupt Mode with Rising edge trigger detection */ -#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000) /*!< External Interrupt Mode with Falling edge trigger detection */ -#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ - -#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000) /*!< External Event Mode with Rising edge trigger detection */ -#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000) /*!< External Event Mode with Falling edge trigger detection */ -#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000) /*!< External Event Mode with Rising/Falling edge trigger detection */ - -/** - * @} - */ - - -/** @defgroup GPIO_speed_define GPIO speed define - * @brief GPIO Output Maximum frequency - * @{ - */ -#define GPIO_SPEED_FREQ_LOW (GPIO_CRL_MODE0_1) /*!< Low speed */ -#define GPIO_SPEED_FREQ_MEDIUM (GPIO_CRL_MODE0_0) /*!< Medium speed */ -#define GPIO_SPEED_FREQ_HIGH (GPIO_CRL_MODE0) /*!< High speed */ - -/** - * @} - */ - - - /** @defgroup GPIO_pull_define GPIO pull define - * @brief GPIO Pull-Up or Pull-Down Activation - * @{ - */ -#define GPIO_NOPULL ((uint32_t)0x00000000) /*!< No Pull-up or Pull-down activation */ -#define GPIO_PULLUP ((uint32_t)0x00000001) /*!< Pull-up activation */ -#define GPIO_PULLDOWN ((uint32_t)0x00000002) /*!< Pull-down activation */ - -/** - * @} - */ - -/** - * @} - */ - - -/* Private macros --------------------------------------------------------*/ -/** @addtogroup GPIO_Private_Macros - * @{ - */ - -#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) - -#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK ) != (uint32_t)0x00) - -#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \ - ((PULL) == GPIO_PULLDOWN)) - -#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_FREQ_LOW) || \ - ((SPEED) == GPIO_SPEED_FREQ_MEDIUM) || ((SPEED) == GPIO_SPEED_FREQ_HIGH)) - -#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\ - ((MODE) == GPIO_MODE_OUTPUT_PP) ||\ - ((MODE) == GPIO_MODE_OUTPUT_OD) ||\ - ((MODE) == GPIO_MODE_AF_PP) ||\ - ((MODE) == GPIO_MODE_AF_OD) ||\ - ((MODE) == GPIO_MODE_IT_RISING) ||\ - ((MODE) == GPIO_MODE_IT_FALLING) ||\ - ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\ - ((MODE) == GPIO_MODE_EVT_RISING) ||\ - ((MODE) == GPIO_MODE_EVT_FALLING) ||\ - ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\ - ((MODE) == GPIO_MODE_ANALOG)) - -/** - * @} - */ - - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Macros GPIO Exported Macros - * @{ - */ - -/** - * @brief Checks whether the specified EXTI line flag is set or not. - * @param __EXTI_LINE__: specifies the EXTI line flag to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval The new state of __EXTI_LINE__ (SET or RESET). - */ -#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) - -/** - * @brief Clears the EXTI's line pending flags. - * @param __EXTI_LINE__: specifies the EXTI lines flags to clear. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) - -/** - * @brief Checks whether the specified EXTI line is asserted or not. - * @param __EXTI_LINE__: specifies the EXTI line to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval The new state of __EXTI_LINE__ (SET or RESET). - */ -#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) - -/** - * @brief Clears the EXTI's line pending bits. - * @param __EXTI_LINE__: specifies the EXTI lines to clear. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) - -/** - * @brief Generates a Software interrupt on selected EXTI line. - * @param __EXTI_LINE__: specifies the EXTI line to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__)) - -/* Include GPIO HAL Extension module */ -#include "stm32f1xx_hal_gpio_ex.h" - -/** - * @} - */ - - - -/* Exported functions --------------------------------------------------------*/ -/* Initialization and de-initialization functions *******************************/ -/** @addtogroup GPIO_Exported_Functions - * @{ - */ - -/** @addtogroup GPIO_Exported_Functions_Group1 - * @{ - */ -void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); -void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); -/** - * @} - */ - -/* IO operation functions *******************************************************/ -/** @addtogroup GPIO_Exported_Functions_Group2 - * @{ - */ -GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); -void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); -void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_GPIO_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h deleted file mode 100644 index 71d8735..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h +++ /dev/null @@ -1,887 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_gpio_ex.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of GPIO HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_GPIO_EX_H -#define __STM32F1xx_HAL_GPIO_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup GPIOEx GPIOEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants - * @{ - */ - -/** @defgroup GPIOEx_EVENTOUT EVENTOUT Cortex Configuration - * @brief This section propose definition to use the Cortex EVENTOUT signal. - * @{ - */ - -/** @defgroup GPIOEx_EVENTOUT_PIN EVENTOUT Pin - * @{ - */ - -#define AFIO_EVENTOUT_PIN_0 AFIO_EVCR_PIN_PX0 /*!< EVENTOUT on pin 0 */ -#define AFIO_EVENTOUT_PIN_1 AFIO_EVCR_PIN_PX1 /*!< EVENTOUT on pin 1 */ -#define AFIO_EVENTOUT_PIN_2 AFIO_EVCR_PIN_PX2 /*!< EVENTOUT on pin 2 */ -#define AFIO_EVENTOUT_PIN_3 AFIO_EVCR_PIN_PX3 /*!< EVENTOUT on pin 3 */ -#define AFIO_EVENTOUT_PIN_4 AFIO_EVCR_PIN_PX4 /*!< EVENTOUT on pin 4 */ -#define AFIO_EVENTOUT_PIN_5 AFIO_EVCR_PIN_PX5 /*!< EVENTOUT on pin 5 */ -#define AFIO_EVENTOUT_PIN_6 AFIO_EVCR_PIN_PX6 /*!< EVENTOUT on pin 6 */ -#define AFIO_EVENTOUT_PIN_7 AFIO_EVCR_PIN_PX7 /*!< EVENTOUT on pin 7 */ -#define AFIO_EVENTOUT_PIN_8 AFIO_EVCR_PIN_PX8 /*!< EVENTOUT on pin 8 */ -#define AFIO_EVENTOUT_PIN_9 AFIO_EVCR_PIN_PX9 /*!< EVENTOUT on pin 9 */ -#define AFIO_EVENTOUT_PIN_10 AFIO_EVCR_PIN_PX10 /*!< EVENTOUT on pin 10 */ -#define AFIO_EVENTOUT_PIN_11 AFIO_EVCR_PIN_PX11 /*!< EVENTOUT on pin 11 */ -#define AFIO_EVENTOUT_PIN_12 AFIO_EVCR_PIN_PX12 /*!< EVENTOUT on pin 12 */ -#define AFIO_EVENTOUT_PIN_13 AFIO_EVCR_PIN_PX13 /*!< EVENTOUT on pin 13 */ -#define AFIO_EVENTOUT_PIN_14 AFIO_EVCR_PIN_PX14 /*!< EVENTOUT on pin 14 */ -#define AFIO_EVENTOUT_PIN_15 AFIO_EVCR_PIN_PX15 /*!< EVENTOUT on pin 15 */ - -#define IS_AFIO_EVENTOUT_PIN(__PIN__) (((__PIN__) == AFIO_EVENTOUT_PIN_0) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_1) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_2) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_3) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_4) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_5) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_6) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_7) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_8) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_9) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_10) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_11) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_12) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_13) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_14) || \ - ((__PIN__) == AFIO_EVENTOUT_PIN_15)) -/** - * @} - */ - -/** @defgroup GPIOEx_EVENTOUT_PORT EVENTOUT Port - * @{ - */ - -#define AFIO_EVENTOUT_PORT_A AFIO_EVCR_PORT_PA /*!< EVENTOUT on port A */ -#define AFIO_EVENTOUT_PORT_B AFIO_EVCR_PORT_PB /*!< EVENTOUT on port B */ -#define AFIO_EVENTOUT_PORT_C AFIO_EVCR_PORT_PC /*!< EVENTOUT on port C */ -#define AFIO_EVENTOUT_PORT_D AFIO_EVCR_PORT_PD /*!< EVENTOUT on port D */ -#define AFIO_EVENTOUT_PORT_E AFIO_EVCR_PORT_PE /*!< EVENTOUT on port E */ - -#define IS_AFIO_EVENTOUT_PORT(__PORT__) (((__PORT__) == AFIO_EVENTOUT_PORT_A) || \ - ((__PORT__) == AFIO_EVENTOUT_PORT_B) || \ - ((__PORT__) == AFIO_EVENTOUT_PORT_C) || \ - ((__PORT__) == AFIO_EVENTOUT_PORT_D) || \ - ((__PORT__) == AFIO_EVENTOUT_PORT_E)) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup GPIOEx_AFIO_AF_REMAPPING Alternate Function Remapping - * @brief This section propose definition to remap the alternate function to some other port/pins. - * @{ - */ - -/** - * @brief Enable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI. - * @note ENABLE: Remap (NSS/PA15, SCK/PB3, MISO/PB4, MOSI/PB5) - * @retval None - */ -#define __HAL_AFIO_REMAP_SPI1_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_SPI1_REMAP) - -/** - * @brief Disable the remapping of SPI1 alternate function NSS, SCK, MISO and MOSI. - * @note DISABLE: No remap (NSS/PA4, SCK/PA5, MISO/PA6, MOSI/PA7) - * @retval None - */ -#define __HAL_AFIO_REMAP_SPI1_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_SPI1_REMAP) - -/** - * @brief Enable the remapping of I2C1 alternate function SCL and SDA. - * @note ENABLE: Remap (SCL/PB8, SDA/PB9) - * @retval None - */ -#define __HAL_AFIO_REMAP_I2C1_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_I2C1_REMAP) - -/** - * @brief Disable the remapping of I2C1 alternate function SCL and SDA. - * @note DISABLE: No remap (SCL/PB6, SDA/PB7) - * @retval None - */ -#define __HAL_AFIO_REMAP_I2C1_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_I2C1_REMAP) - -/** - * @brief Enable the remapping of USART1 alternate function TX and RX. - * @note ENABLE: Remap (TX/PB6, RX/PB7) - * @retval None - */ -#define __HAL_AFIO_REMAP_USART1_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_USART1_REMAP) - -/** - * @brief Disable the remapping of USART1 alternate function TX and RX. - * @note DISABLE: No remap (TX/PA9, RX/PA10) - * @retval None - */ -#define __HAL_AFIO_REMAP_USART1_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_USART1_REMAP) - -/** - * @brief Enable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX. - * @note ENABLE: Remap (CTS/PD3, RTS/PD4, TX/PD5, RX/PD6, CK/PD7) - * @retval None - */ -#define __HAL_AFIO_REMAP_USART2_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_USART2_REMAP) - -/** - * @brief Disable the remapping of USART2 alternate function CTS, RTS, CK, TX and RX. - * @note DISABLE: No remap (CTS/PA0, RTS/PA1, TX/PA2, RX/PA3, CK/PA4) - * @retval None - */ -#define __HAL_AFIO_REMAP_USART2_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_USART2_REMAP) - -/** - * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. - * @note ENABLE: Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) - * @retval None - */ -#define __HAL_AFIO_REMAP_USART3_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_USART3_REMAP, AFIO_MAPR_USART3_REMAP_FULLREMAP) - -/** - * @brief Enable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. - * @note PARTIAL: Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) - * @retval None - */ -#define __HAL_AFIO_REMAP_USART3_PARTIAL() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_USART3_REMAP, AFIO_MAPR_USART3_REMAP_PARTIALREMAP) - -/** - * @brief Disable the remapping of USART3 alternate function CTS, RTS, CK, TX and RX. - * @note DISABLE: No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) - * @retval None - */ -#define __HAL_AFIO_REMAP_USART3_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_USART3_REMAP, AFIO_MAPR_USART3_REMAP_NOREMAP) - -/** - * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) - * @note ENABLE: Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM1_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP, AFIO_MAPR_TIM1_REMAP_FULLREMAP) - -/** - * @brief Enable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) - * @note PARTIAL: Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM1_PARTIAL() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP, AFIO_MAPR_TIM1_REMAP_PARTIALREMAP) - -/** - * @brief Disable the remapping of TIM1 alternate function channels 1 to 4, 1N to 3N, external trigger (ETR) and Break input (BKIN) - * @note DISABLE: No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM1_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM1_REMAP, AFIO_MAPR_TIM1_REMAP_NOREMAP) - -/** - * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) - * @note ENABLE: Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM2_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP, AFIO_MAPR_TIM2_REMAP_FULLREMAP) - -/** - * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) - * @note PARTIAL_2: Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM2_PARTIAL_2() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP, AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2) - -/** - * @brief Enable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) - * @note PARTIAL_1: Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM2_PARTIAL_1() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP, AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1) - -/** - * @brief Disable the remapping of TIM2 alternate function channels 1 to 4 and external trigger (ETR) - * @note DISABLE: No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM2_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM2_REMAP, AFIO_MAPR_TIM2_REMAP_NOREMAP) - -/** - * @brief Enable the remapping of TIM3 alternate function channels 1 to 4 - * @note ENABLE: Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) - * @note TIM3_ETR on PE0 is not re-mapped. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM3_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP, AFIO_MAPR_TIM3_REMAP_FULLREMAP) - -/** - * @brief Enable the remapping of TIM3 alternate function channels 1 to 4 - * @note PARTIAL: Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) - * @note TIM3_ETR on PE0 is not re-mapped. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM3_PARTIAL() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP, AFIO_MAPR_TIM3_REMAP_PARTIALREMAP) - -/** - * @brief Disable the remapping of TIM3 alternate function channels 1 to 4 - * @note DISABLE: No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) - * @note TIM3_ETR on PE0 is not re-mapped. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM3_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_TIM3_REMAP, AFIO_MAPR_TIM3_REMAP_NOREMAP) - -/** - * @brief Enable the remapping of TIM4 alternate function channels 1 to 4. - * @note ENABLE: Full remap (TIM4_CH1/PD12, TIM4_CH2/PD13, TIM4_CH3/PD14, TIM4_CH4/PD15) - * @note TIM4_ETR on PE0 is not re-mapped. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM4_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM4_REMAP) - -/** - * @brief Disable the remapping of TIM4 alternate function channels 1 to 4. - * @note DISABLE: No remap (TIM4_CH1/PB6, TIM4_CH2/PB7, TIM4_CH3/PB8, TIM4_CH4/PB9) - * @note TIM4_ETR on PE0 is not re-mapped. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM4_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM4_REMAP) - -#if defined(AFIO_MAPR_CAN_REMAP_REMAP1) - -/** - * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. - * @note CASE 1: CAN_RX mapped to PA11, CAN_TX mapped to PA12 - * @retval None - */ -#define __HAL_AFIO_REMAP_CAN1_1() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_CAN_REMAP, AFIO_MAPR_CAN_REMAP_REMAP1) - -/** - * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. - * @note CASE 2: CAN_RX mapped to PB8, CAN_TX mapped to PB9 (not available on 36-pin package) - * @retval None - */ -#define __HAL_AFIO_REMAP_CAN1_2() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_CAN_REMAP, AFIO_MAPR_CAN_REMAP_REMAP2) - -/** - * @brief Enable or disable the remapping of CAN alternate function CAN_RX and CAN_TX in devices with a single CAN interface. - * @note CASE 3: CAN_RX mapped to PD0, CAN_TX mapped to PD1 - * @retval None - */ -#define __HAL_AFIO_REMAP_CAN1_3() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_CAN_REMAP, AFIO_MAPR_CAN_REMAP_REMAP3) -#endif - -/** - * @brief Enable the remapping of PD0 and PD1. When the HSE oscillator is not used - * (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and - * OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available - * on 100-pin and 144-pin packages, no need for remapping). - * @note ENABLE: PD0 remapped on OSC_IN, PD1 remapped on OSC_OUT. - * @retval None - */ -#define __HAL_AFIO_REMAP_PD01_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_PD01_REMAP) - -/** - * @brief Disable the remapping of PD0 and PD1. When the HSE oscillator is not used - * (application running on internal 8 MHz RC) PD0 and PD1 can be mapped on OSC_IN and - * OSC_OUT. This is available only on 36, 48 and 64 pins packages (PD0 and PD1 are available - * on 100-pin and 144-pin packages, no need for remapping). - * @note DISABLE: No remapping of PD0 and PD1 - * @retval None - */ -#define __HAL_AFIO_REMAP_PD01_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_PD01_REMAP) - -#if defined(AFIO_MAPR_TIM5CH4_IREMAP) -/** - * @brief Enable the remapping of TIM5CH4. - * @note ENABLE: LSI internal clock is connected to TIM5_CH4 input for calibration purpose. - * @note This function is available only in high density value line devices. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM5CH4_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM5CH4_IREMAP) - -/** - * @brief Disable the remapping of TIM5CH4. - * @note DISABLE: TIM5_CH4 is connected to PA3 - * @note This function is available only in high density value line devices. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM5CH4_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM5CH4_IREMAP) -#endif - -#if defined(AFIO_MAPR_ETH_REMAP) -/** - * @brief Enable the remapping of Ethernet MAC connections with the PHY. - * @note ENABLE: Remap (RX_DV-CRS_DV/PD8, RXD0/PD9, RXD1/PD10, RXD2/PD11, RXD3/PD12) - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_REMAP_ETH_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ETH_REMAP) - -/** - * @brief Disable the remapping of Ethernet MAC connections with the PHY. - * @note DISABLE: No remap (RX_DV-CRS_DV/PA7, RXD0/PC4, RXD1/PC5, RXD2/PB0, RXD3/PB1) - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_REMAP_ETH_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ETH_REMAP) -#endif - -#if defined(AFIO_MAPR_CAN2_REMAP) - -/** - * @brief Enable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX. - * @note ENABLE: Remap (CAN2_RX/PB5, CAN2_TX/PB6) - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_REMAP_CAN2_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_CAN2_REMAP) - -/** - * @brief Disable the remapping of CAN2 alternate function CAN2_RX and CAN2_TX. - * @note DISABLE: No remap (CAN2_RX/PB12, CAN2_TX/PB13) - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_REMAP_CAN2_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_CAN2_REMAP) -#endif - -#if defined(AFIO_MAPR_MII_RMII_SEL) -/** - * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY. - * @note ETH_RMII: Configure Ethernet MAC for connection with an RMII PHY - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_ETH_RMII() SET_BIT(AFIO->MAPR, AFIO_MAPR_MII_RMII_SEL) - -/** - * @brief Configures the Ethernet MAC internally for use with an external MII or RMII PHY. - * @note ETH_MII: Configure Ethernet MAC for connection with an MII PHY - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_ETH_MII() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_MII_RMII_SEL) -#endif - -/** - * @brief Enable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion). - * @note ENABLE: ADC1 External Event injected conversion is connected to TIM8 Channel4. - * @retval None - */ -#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGINJ_REMAP) - -/** - * @brief Disable the remapping of ADC1_ETRGINJ (ADC 1 External trigger injected conversion). - * @note DISABLE: ADC1 External trigger injected conversion is connected to EXTI15 - * @retval None - */ -#define __HAL_AFIO_REMAP_ADC1_ETRGINJ_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGINJ_REMAP) - -/** - * @brief Enable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion). - * @note ENABLE: ADC1 External Event regular conversion is connected to TIM8 TRG0. - * @retval None - */ -#define __HAL_AFIO_REMAP_ADC1_ETRGREG_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGREG_REMAP) - -/** - * @brief Disable the remapping of ADC1_ETRGREG (ADC 1 External trigger regular conversion). - * @note DISABLE: ADC1 External trigger regular conversion is connected to EXTI11 - * @retval None - */ -#define __HAL_AFIO_REMAP_ADC1_ETRGREG_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC1_ETRGREG_REMAP) - -#if defined(AFIO_MAPR_ADC2_ETRGINJ_REMAP) - -/** - * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion). - * @note ENABLE: ADC2 External Event injected conversion is connected to TIM8 Channel4. - * @retval None - */ -#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGINJ_REMAP) - -/** - * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger injected conversion). - * @note DISABLE: ADC2 External trigger injected conversion is connected to EXTI15 - * @retval None - */ -#define __HAL_AFIO_REMAP_ADC2_ETRGINJ_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGINJ_REMAP) -#endif - -#if defined (AFIO_MAPR_ADC2_ETRGREG_REMAP) - -/** - * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). - * @note ENABLE: ADC2 External Event regular conversion is connected to TIM8 TRG0. - * @retval None - */ -#define __HAL_AFIO_REMAP_ADC2_ETRGREG_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGREG_REMAP) - -/** - * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). - * @note DISABLE: ADC2 External trigger regular conversion is connected to EXTI11 - * @retval None - */ -#define __HAL_AFIO_REMAP_ADC2_ETRGREG_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_ADC2_ETRGREG_REMAP) -#endif - -/** - * @brief Enable the Serial wire JTAG configuration - * @note ENABLE: Full SWJ (JTAG-DP + SW-DP): Reset State - * @retval None - */ -#define __HAL_AFIO_REMAP_SWJ_ENABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_SWJ_CFG, AFIO_MAPR_SWJ_CFG_RESET) - -/** - * @brief Enable the Serial wire JTAG configuration - * @note NONJTRST: Full SWJ (JTAG-DP + SW-DP) but without NJTRST - * @retval None - */ -#define __HAL_AFIO_REMAP_SWJ_NONJTRST() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_SWJ_CFG, AFIO_MAPR_SWJ_CFG_NOJNTRST) - -/** - * @brief Enable the Serial wire JTAG configuration - * @note NOJTAG: JTAG-DP Disabled and SW-DP Enabled - * @retval None - */ -#define __HAL_AFIO_REMAP_SWJ_NOJTAG() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_SWJ_CFG, AFIO_MAPR_SWJ_CFG_JTAGDISABLE) - -/** - * @brief Disable the Serial wire JTAG configuration - * @note DISABLE: JTAG-DP Disabled and SW-DP Disabled - * @retval None - */ -#define __HAL_AFIO_REMAP_SWJ_DISABLE() MODIFY_REG(AFIO->MAPR, AFIO_MAPR_SWJ_CFG, AFIO_MAPR_SWJ_CFG_DISABLE) - -#if defined(AFIO_MAPR_SPI3_REMAP) - -/** - * @brief Enable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD. - * @note ENABLE: Remap (SPI3_NSS-I2S3_WS/PA4, SPI3_SCK-I2S3_CK/PC10, SPI3_MISO/PC11, SPI3_MOSI-I2S3_SD/PC12) - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_REMAP_SPI3_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_SPI3_REMAP) - -/** - * @brief Disable the remapping of SPI3 alternate functions SPI3_NSS/I2S3_WS, SPI3_SCK/I2S3_CK, SPI3_MISO, SPI3_MOSI/I2S3_SD. - * @note DISABLE: No remap (SPI3_NSS-I2S3_WS/PA15, SPI3_SCK-I2S3_CK/PB3, SPI3_MISO/PB4, SPI3_MOSI-I2S3_SD/PB5). - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_REMAP_SPI3_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_SPI3_REMAP) -#endif - -#if defined(AFIO_MAPR_TIM2ITR1_IREMAP) - -/** - * @brief Control of TIM2_ITR1 internal mapping. - * @note TO_USB: Connect USB OTG SOF (Start of Frame) output to TIM2_ITR1 for calibration purposes. - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_TIM2ITR1_TO_USB() SET_BIT(AFIO->MAPR, AFIO_MAPR_TIM2ITR1_IREMAP) - -/** - * @brief Control of TIM2_ITR1 internal mapping. - * @note TO_ETH: Connect TIM2_ITR1 internally to the Ethernet PTP output for calibration purposes. - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_TIM2ITR1_TO_ETH() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_TIM2ITR1_IREMAP) -#endif - -#if defined(AFIO_MAPR_PTP_PPS_REMAP) - -/** - * @brief Enable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). - * @note ENABLE: PTP_PPS is output on PB5 pin. - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_ETH_PTP_PPS_ENABLE() SET_BIT(AFIO->MAPR, AFIO_MAPR_PTP_PPS_REMAP) - -/** - * @brief Disable the remapping of ADC2_ETRGREG (ADC 2 External trigger regular conversion). - * @note DISABLE: PTP_PPS not output on PB5 pin. - * @note This bit is available only in connectivity line devices and is reserved otherwise. - * @retval None - */ -#define __HAL_AFIO_ETH_PTP_PPS_DISABLE() CLEAR_BIT(AFIO->MAPR, AFIO_MAPR_PTP_PPS_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM9_REMAP) - -/** - * @brief Enable the remapping of TIM9_CH1 and TIM9_CH2. - * @note ENABLE: Remap (TIM9_CH1 on PE5 and TIM9_CH2 on PE6). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM9_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP) - -/** - * @brief Disable the remapping of TIM9_CH1 and TIM9_CH2. - * @note DISABLE: No remap (TIM9_CH1 on PA2 and TIM9_CH2 on PA3). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM9_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM9_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM10_REMAP) - -/** - * @brief Enable the remapping of TIM10_CH1. - * @note ENABLE: Remap (TIM10_CH1 on PF6). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM10_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP) - -/** - * @brief Disable the remapping of TIM10_CH1. - * @note DISABLE: No remap (TIM10_CH1 on PB8). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM10_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM10_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM11_REMAP) -/** - * @brief Enable the remapping of TIM11_CH1. - * @note ENABLE: Remap (TIM11_CH1 on PF7). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM11_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP) - -/** - * @brief Disable the remapping of TIM11_CH1. - * @note DISABLE: No remap (TIM11_CH1 on PB9). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM11_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM11_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM13_REMAP) - -/** - * @brief Enable the remapping of TIM13_CH1. - * @note ENABLE: Remap STM32F100:(TIM13_CH1 on PF8). Others:(TIM13_CH1 on PB0). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM13_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP) - -/** - * @brief Disable the remapping of TIM13_CH1. - * @note DISABLE: No remap STM32F100:(TIM13_CH1 on PA6). Others:(TIM13_CH1 on PC8). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM13_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM13_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM14_REMAP) - -/** - * @brief Enable the remapping of TIM14_CH1. - * @note ENABLE: Remap STM32F100:(TIM14_CH1 on PB1). Others:(TIM14_CH1 on PF9). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM14_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP) - -/** - * @brief Disable the remapping of TIM14_CH1. - * @note DISABLE: No remap STM32F100:(TIM14_CH1 on PC9). Others:(TIM14_CH1 on PA7). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM14_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM14_REMAP) -#endif - -#if defined(AFIO_MAPR2_FSMC_NADV_REMAP) - -/** - * @brief Controls the use of the optional FSMC_NADV signal. - * @note DISCONNECTED: The NADV signal is not connected. The I/O pin can be used by another peripheral. - * @retval None - */ -#define __HAL_AFIO_FSMCNADV_DISCONNECTED() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP) - -/** - * @brief Controls the use of the optional FSMC_NADV signal. - * @note CONNECTED: The NADV signal is connected to the output (default). - * @retval None - */ -#define __HAL_AFIO_FSMCNADV_CONNECTED() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_FSMC_NADV_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM15_REMAP) - -/** - * @brief Enable the remapping of TIM15_CH1 and TIM15_CH2. - * @note ENABLE: Remap (TIM15_CH1 on PB14 and TIM15_CH2 on PB15). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM15_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP) - -/** - * @brief Disable the remapping of TIM15_CH1 and TIM15_CH2. - * @note DISABLE: No remap (TIM15_CH1 on PA2 and TIM15_CH2 on PA3). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM15_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM15_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM16_REMAP) - -/** - * @brief Enable the remapping of TIM16_CH1. - * @note ENABLE: Remap (TIM16_CH1 on PA6). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM16_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP) - -/** - * @brief Disable the remapping of TIM16_CH1. - * @note DISABLE: No remap (TIM16_CH1 on PB8). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM16_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM16_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM17_REMAP) - -/** - * @brief Enable the remapping of TIM17_CH1. - * @note ENABLE: Remap (TIM17_CH1 on PA7). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM17_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP) - -/** - * @brief Disable the remapping of TIM17_CH1. - * @note DISABLE: No remap (TIM17_CH1 on PB9). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM17_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM17_REMAP) -#endif - -#if defined(AFIO_MAPR2_CEC_REMAP) - -/** - * @brief Enable the remapping of CEC. - * @note ENABLE: Remap (CEC on PB10). - * @retval None - */ -#define __HAL_AFIO_REMAP_CEC_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP) - -/** - * @brief Disable the remapping of CEC. - * @note DISABLE: No remap (CEC on PB8). - * @retval None - */ -#define __HAL_AFIO_REMAP_CEC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_CEC_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM1_DMA_REMAP) - -/** - * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels. - * @note ENABLE: Remap (TIM1_CH1 DMA request/DMA1 Channel6, TIM1_CH2 DMA request/DMA1 Channel6) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM1DMA_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP) - -/** - * @brief Controls the mapping of the TIM1_CH1 TIM1_CH2 DMA requests onto the DMA1 channels. - * @note DISABLE: No remap (TIM1_CH1 DMA request/DMA1 Channel2, TIM1_CH2 DMA request/DMA1 Channel3). - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM1DMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM1_DMA_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM67_DAC_DMA_REMAP) - -/** - * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels. - * @note ENABLE: Remap (TIM6_DAC1 DMA request/DMA1 Channel3, TIM7_DAC2 DMA request/DMA1 Channel4) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM67DACDMA_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP) - -/** - * @brief Controls the mapping of the TIM6_DAC1 and TIM7_DAC2 DMA requests onto the DMA1 channels. - * @note DISABLE: No remap (TIM6_DAC1 DMA request/DMA2 Channel3, TIM7_DAC2 DMA request/DMA2 Channel4) - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM67DACDMA_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM67_DAC_DMA_REMAP) -#endif - -#if defined(AFIO_MAPR2_TIM12_REMAP) - -/** - * @brief Enable the remapping of TIM12_CH1 and TIM12_CH2. - * @note ENABLE: Remap (TIM12_CH1 on PB12 and TIM12_CH2 on PB13). - * @note This bit is available only in high density value line devices. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM12_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP) - -/** - * @brief Disable the remapping of TIM12_CH1 and TIM12_CH2. - * @note DISABLE: No remap (TIM12_CH1 on PC4 and TIM12_CH2 on PC5). - * @note This bit is available only in high density value line devices. - * @retval None - */ -#define __HAL_AFIO_REMAP_TIM12_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_TIM12_REMAP) -#endif - -#if defined(AFIO_MAPR2_MISC_REMAP) - -/** - * @brief Miscellaneous features remapping. - * This bit is set and cleared by software. It controls miscellaneous features. - * The DMA2 channel 5 interrupt position in the vector table. - * The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register). - * @note ENABLE: DMA2 channel 5 interrupt is mapped separately at position 60 and TIM15 TRGO event is - * selected as DAC Trigger 3, TIM15 triggers TIM1/3. - * @note This bit is available only in high density value line devices. - * @retval None - */ -#define __HAL_AFIO_REMAP_MISC_ENABLE() SET_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP) - -/** - * @brief Miscellaneous features remapping. - * This bit is set and cleared by software. It controls miscellaneous features. - * The DMA2 channel 5 interrupt position in the vector table. - * The timer selection for DAC trigger 3 (TSEL[2:0] = 011, for more details refer to the DAC_CR register). - * @note DISABLE: DMA2 channel 5 interrupt is mapped with DMA2 channel 4 at position 59, TIM5 TRGO - * event is selected as DAC Trigger 3, TIM5 triggers TIM1/3. - * @note This bit is available only in high density value line devices. - * @retval None - */ -#define __HAL_AFIO_REMAP_MISC_DISABLE() CLEAR_BIT(AFIO->MAPR2, AFIO_MAPR2_MISC_REMAP) -#endif - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup GPIOEx_Private_Macros GPIOEx Private Macros - * @{ - */ -#if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6) -#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :3U) -#elif defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F103xB) || defined(STM32F105xC) || defined(STM32F107xC) -#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :4U) -#elif defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) -#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U :\ - ((__GPIOx__) == (GPIOF))? 5U :6U) -#endif - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup GPIOEx_Exported_Functions - * @{ - */ - -/** @addtogroup GPIOEx_Exported_Functions_Group1 - * @{ - */ -void HAL_GPIOEx_ConfigEventout(uint32_t GPIO_PortSource, uint32_t GPIO_PinSource); -void HAL_GPIOEx_EnableEventout(void); -void HAL_GPIOEx_DisableEventout(void); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_GPIO_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h deleted file mode 100644 index 8dcc87f..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h +++ /dev/null @@ -1,853 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_pcd.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of PCD HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_PCD_H -#define __STM32F1xx_HAL_PCD_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F102x6) || defined(STM32F102xB) || \ - defined(STM32F103x6) || defined(STM32F103xB) || \ - defined(STM32F103xE) || defined(STM32F103xG) || \ - defined(STM32F105xC) || defined(STM32F107xC) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_ll_usb.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup PCD - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup PCD_Exported_Types PCD Exported Types - * @{ - */ - -/** - * @brief PCD State structure definition - */ -typedef enum -{ - HAL_PCD_STATE_RESET = 0x00, - HAL_PCD_STATE_READY = 0x01, - HAL_PCD_STATE_ERROR = 0x02, - HAL_PCD_STATE_BUSY = 0x03, - HAL_PCD_STATE_TIMEOUT = 0x04 -} PCD_StateTypeDef; - -#if defined (USB) -/** - * @brief PCD double buffered endpoint direction - */ -typedef enum -{ - PCD_EP_DBUF_OUT, - PCD_EP_DBUF_IN, - PCD_EP_DBUF_ERR, -}PCD_EP_DBUF_DIR; - -/** - * @brief PCD endpoint buffer number - */ -typedef enum -{ - PCD_EP_NOBUF, - PCD_EP_BUF0, - PCD_EP_BUF1 -}PCD_EP_BUF_NUM; -#endif /* USB */ - -#if defined (USB_OTG_FS) -typedef USB_OTG_GlobalTypeDef PCD_TypeDef; -typedef USB_OTG_CfgTypeDef PCD_InitTypeDef; -typedef USB_OTG_EPTypeDef PCD_EPTypeDef; -#endif /* USB_OTG_FS */ - -#if defined (USB) -typedef USB_TypeDef PCD_TypeDef; -typedef USB_CfgTypeDef PCD_InitTypeDef; -typedef USB_EPTypeDef PCD_EPTypeDef; -#endif /* USB */ - -/** - * @brief PCD Handle Structure definition - */ -typedef struct -{ - PCD_TypeDef *Instance; /*!< Register base address */ - PCD_InitTypeDef Init; /*!< PCD required parameters */ - __IO uint8_t USB_Address; /*!< USB Address: not used by USB OTG FS */ - PCD_EPTypeDef IN_ep[15]; /*!< IN endpoint parameters */ - PCD_EPTypeDef OUT_ep[15]; /*!< OUT endpoint parameters */ - HAL_LockTypeDef Lock; /*!< PCD peripheral status */ - __IO PCD_StateTypeDef State; /*!< PCD communication state */ - uint32_t Setup[12]; /*!< Setup packet buffer */ - void *pData; /*!< Pointer to upper stack Handler */ -} PCD_HandleTypeDef; - -/** - * @} - */ - -/* Include PCD HAL Extension module */ -#include "stm32f1xx_hal_pcd_ex.h" - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PCD_Exported_Constants PCD Exported Constants - * @{ - */ - -/** @defgroup PCD_Speed PCD Speed - * @{ - */ -#define PCD_SPEED_HIGH 0 /* Not Supported */ -#define PCD_SPEED_HIGH_IN_FULL 1 /* Not Supported */ -#define PCD_SPEED_FULL 2 -/** - * @} - */ - -/** @defgroup PCD_PHY_Module PCD PHY Module - * @{ - */ -#define PCD_PHY_EMBEDDED 2 -/** - * @} - */ - -/** @defgroup PCD_Turnaround_Timeout Turnaround Timeout Value - * @{ - */ -#ifndef USBD_FS_TRDT_VALUE - #define USBD_FS_TRDT_VALUE 5 -#endif /* USBD_FS_TRDT_VALUE */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup PCD_Exported_Macros PCD Exported Macros - * @brief macros to handle interrupts and specific clock configurations - * @{ - */ -#if defined (USB_OTG_FS) - -#define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance) -#define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance) - -#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) -#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__)) -#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0) - -#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \ - ~(USB_OTG_PCGCCTL_STOPCLK) - -#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK - -#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10) - -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE - -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ - do{ \ - EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \ - EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \ - } while(0) - -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() \ - do{ \ - EXTI->FTSR |= (USB_OTG_FS_WAKEUP_EXTI_LINE); \ - EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \ - } while(0) - -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() \ - do{ \ - EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \ - EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \ - EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \ - EXTI->FTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \ - } while(0) - -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE) -#endif /* USB_OTG_FS */ - -#if defined (USB) -#define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance) -#define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance) -#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) -#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__)) - -#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_WAKEUP_EXTI_LINE -#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_WAKEUP_EXTI_LINE) -#define __HAL_USB_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_WAKEUP_EXTI_LINE) -#define __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_WAKEUP_EXTI_LINE - -#define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ - do{ \ - EXTI->FTSR &= ~(USB_WAKEUP_EXTI_LINE); \ - EXTI->RTSR |= USB_WAKEUP_EXTI_LINE; \ - } while(0) - -#define __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE() \ - do{ \ - EXTI->FTSR |= (USB_WAKEUP_EXTI_LINE); \ - EXTI->RTSR &= ~(USB_WAKEUP_EXTI_LINE); \ - } while(0) - -#define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() \ - do{ \ - EXTI->RTSR &= ~(USB_WAKEUP_EXTI_LINE); \ - EXTI->FTSR &= ~(USB_WAKEUP_EXTI_LINE); \ - EXTI->RTSR |= USB_WAKEUP_EXTI_LINE; \ - EXTI->FTSR |= USB_WAKEUP_EXTI_LINE; \ - } while(0) -#endif /* USB */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PCD_Exported_Functions PCD Exported Functions - * @{ - */ - -/* Initialization/de-initialization functions ********************************/ -/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd); -void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); -void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); -/** - * @} - */ - -/* I/O operation functions ***************************************************/ -/* Non-Blocking mode: Interrupt */ -/** @addtogroup PCD_Exported_Functions_Group2 IO operation functions - * @{ - */ -HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); -void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); - -void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); -/** - * @} - */ - -/* Peripheral Control functions **********************************************/ -/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ -HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); -HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type); -HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); -HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); -uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); -/** - * @} - */ - -/* Peripheral State functions ************************************************/ -/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions - * @{ - */ -PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); -/** - * @} - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup PCD_Private_Constants PCD Private Constants - * @{ - */ -/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt - * @{ - */ -#if defined (USB_OTG_FS) -#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE ((uint32_t)0x08) -#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE ((uint32_t)0x0C) -#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE ((uint32_t)0x10) - -#define USB_OTG_FS_WAKEUP_EXTI_LINE ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB EXTI Line */ -#endif /* USB_OTG_FS */ - -#if defined (USB) -#define USB_WAKEUP_EXTI_LINE ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB EXTI Line */ -#endif /* USB */ -/** - * @} - */ - -#if defined (USB) -/** @defgroup PCD_EP0_MPS PCD EP0 MPS - * @{ - */ -#define PCD_EP0MPS_64 DEP0CTL_MPS_64 -#define PCD_EP0MPS_32 DEP0CTL_MPS_32 -#define PCD_EP0MPS_16 DEP0CTL_MPS_16 -#define PCD_EP0MPS_08 DEP0CTL_MPS_8 -/** - * @} - */ - -/** @defgroup PCD_ENDP PCD ENDP - * @{ - */ -#define PCD_ENDP0 ((uint8_t)0) -#define PCD_ENDP1 ((uint8_t)1) -#define PCD_ENDP2 ((uint8_t)2) -#define PCD_ENDP3 ((uint8_t)3) -#define PCD_ENDP4 ((uint8_t)4) -#define PCD_ENDP5 ((uint8_t)5) -#define PCD_ENDP6 ((uint8_t)6) -#define PCD_ENDP7 ((uint8_t)7) -/** - * @} - */ - -/** @defgroup PCD_ENDP_Kind PCD Endpoint Kind - * @{ - */ -#define PCD_SNG_BUF 0 -#define PCD_DBL_BUF 1 -/** - * @} - */ -#endif /* USB */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup PCD_Private_Macros PCD Private Macros - * @{ - */ -#if defined (USB) -/* SetENDPOINT */ -#define PCD_SET_ENDPOINT(USBx, bEpNum,wRegValue) (*(&(USBx)->EP0R + (bEpNum) * 2)= (uint16_t)(wRegValue)) - -/* GetENDPOINT */ -#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(&(USBx)->EP0R + (bEpNum) * 2)) - -/* ENDPOINT transfer */ -#define USB_EP0StartXfer USB_EPStartXfer - -/** - * @brief sets the type in the endpoint register(bits EP_TYPE[1:0]) - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @param wType: Endpoint Type. - * @retval None - */ -#define PCD_SET_EPTYPE(USBx, bEpNum,wType) (PCD_SET_ENDPOINT((USBx), (bEpNum),\ - ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) ))) - -/** - * @brief gets the type in the endpoint register(bits EP_TYPE[1:0]) - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @retval Endpoint Type - */ -#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD) - -/** - * @brief free buffer used from the application realizing it to the line - toggles bit SW_BUF in the double buffered endpoint register - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @param bDir: Direction - * @retval None - */ -#define PCD_FreeUserBuffer(USBx, bEpNum, bDir)\ -{\ - if ((bDir) == PCD_EP_DBUF_OUT)\ - { /* OUT double buffered endpoint */\ - PCD_TX_DTOG((USBx), (bEpNum));\ - }\ - else if ((bDir) == PCD_EP_DBUF_IN)\ - { /* IN double buffered endpoint */\ - PCD_RX_DTOG((USBx), (bEpNum));\ - }\ -} - -/** - * @brief gets direction of the double buffered endpoint - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @retval EP_DBUF_OUT, EP_DBUF_IN, - * EP_DBUF_ERR if the endpoint counter not yet programmed. - */ -#define PCD_GET_DB_DIR(USBx, bEpNum)\ -{\ - if ((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum)) & 0xFC00) != 0)\ - return(PCD_EP_DBUF_OUT);\ - else if (((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x03FF) != 0)\ - return(PCD_EP_DBUF_IN);\ - else\ - return(PCD_EP_DBUF_ERR);\ -} - -/** - * @brief sets the status for tx transfer (bits STAT_TX[1:0]). - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @param wState: new state - * @retval None - */ -#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) { register uint16_t _wRegVal;\ - \ - _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK;\ - /* toggle first bit ? */ \ - if((USB_EPTX_DTOG1 & (wState))!= 0)\ - { \ - _wRegVal ^= USB_EPTX_DTOG1; \ - } \ - /* toggle second bit ? */ \ - if((USB_EPTX_DTOG2 & (wState))!= 0) \ - { \ - _wRegVal ^= USB_EPTX_DTOG2; \ - } \ - PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX));\ - } /* PCD_SET_EP_TX_STATUS */ - -/** - * @brief sets the status for rx transfer (bits STAT_TX[1:0]) - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @param wState: new state - * @retval None - */ -#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) {\ - register uint16_t _wRegVal; \ - \ - _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK;\ - /* toggle first bit ? */ \ - if((USB_EPRX_DTOG1 & (wState))!= 0) \ - { \ - _wRegVal ^= USB_EPRX_DTOG1; \ - } \ - /* toggle second bit ? */ \ - if((USB_EPRX_DTOG2 & (wState))!= 0) \ - { \ - _wRegVal ^= USB_EPRX_DTOG2; \ - } \ - PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \ - } /* PCD_SET_EP_RX_STATUS */ - -/** - * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0]) - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @param wStaterx: new state. - * @param wStatetx: new state. - * @retval None - */ -#define PCD_SET_EP_TXRX_STATUS(USBx,bEpNum,wStaterx,wStatetx) {\ - register uint32_t _wRegVal; \ - \ - _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK |USB_EPTX_STAT) ;\ - /* toggle first bit ? */ \ - if((USB_EPRX_DTOG1 & ((wStaterx)))!= 0) \ - { \ - _wRegVal ^= USB_EPRX_DTOG1; \ - } \ - /* toggle second bit ? */ \ - if((USB_EPRX_DTOG2 & (wStaterx))!= 0) \ - { \ - _wRegVal ^= USB_EPRX_DTOG2; \ - } \ - /* toggle first bit ? */ \ - if((USB_EPTX_DTOG1 & (wStatetx))!= 0) \ - { \ - _wRegVal ^= USB_EPTX_DTOG1; \ - } \ - /* toggle second bit ? */ \ - if((USB_EPTX_DTOG2 & (wStatetx))!= 0) \ - { \ - _wRegVal ^= USB_EPTX_DTOG2; \ - } \ - PCD_SET_ENDPOINT((USBx), (bEpNum), _wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX); \ - } /* PCD_SET_EP_TXRX_STATUS */ - -/** - * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0] - * /STAT_RX[1:0]) - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @retval status - */ -#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT) -#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT) - -/** - * @brief sets directly the VALID tx/rx-status into the endpoint register - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @retval None - */ -#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID)) -#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID)) - -/** - * @brief checks stall condition in an endpoint. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @retval TRUE = endpoint in stall condition. - */ -#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) \ - == USB_EP_TX_STALL) -#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) \ - == USB_EP_RX_STALL) - -/** - * @brief set & clear EP_KIND bit. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @retval None - */ -#define PCD_SET_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \ - (USB_EP_CTR_RX|USB_EP_CTR_TX|((PCD_GET_ENDPOINT((USBx), (bEpNum)) | USB_EP_KIND) & USB_EPREG_MASK)))) -#define PCD_CLEAR_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \ - (USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK)))) - -/** - * @brief Sets/clears directly STATUS_OUT bit in the endpoint register. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @retval None - */ -#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum)) -#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum)) - -/** - * @brief Sets/clears directly EP_KIND bit in the endpoint register. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @retval None - */ -#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum)) -#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum)) - -/** - * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @retval None - */ -#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\ - PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0x7FFF & USB_EPREG_MASK)) -#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\ - PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0xFF7F & USB_EPREG_MASK)) - -/** - * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @retval None - */ -#define PCD_RX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \ - USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK))) -#define PCD_TX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \ - USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK))) - -/** - * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @retval None - */ -#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_RX) != 0)\ - { \ - PCD_RX_DTOG((USBx), (bEpNum)); \ - } -#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_TX) != 0)\ - { \ - PCD_TX_DTOG((USBx), (bEpNum)); \ - } - -/** - * @brief Sets address in an endpoint register. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @param bAddr: Address. - * @retval None - */ -#define PCD_SET_EP_ADDRESS(USBx, bEpNum,bAddr) PCD_SET_ENDPOINT((USBx), (bEpNum),\ - USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr)) - -#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD)) - -#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8)*2+ ((uint32_t)(USBx) + 0x400))) -#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8+2)*2+ ((uint32_t)(USBx) + 0x400))) -#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8+4)*2+ ((uint32_t)(USBx) + 0x400))) -#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8+6)*2+ ((uint32_t)(USBx) + 0x400))) - -#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\ - uint32_t *pdwReg = PCD_EP_RX_CNT((USBx), (bEpNum)); \ - PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount));\ - } - -/** - * @brief sets address of the tx/rx buffer. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @param wAddr: address to be set (must be word aligned). - * @retval None - */ -#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_TX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1)) -#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_RX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1)) - -/** - * @brief Gets address of the tx/rx buffer. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @retval address of the buffer. - */ -#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum))) -#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum))) - -/** - * @brief Sets counter of rx buffer with no. of blocks. - * @param dwReg: Register - * @param wCount: Counter. - * @param wNBlocks: no. of Blocks. - * @retval None - */ -#define PCD_CALC_BLK32(dwReg,wCount,wNBlocks) {\ - (wNBlocks) = (wCount) >> 5;\ - if(((wCount) & 0x1f) == 0)\ - { \ - (wNBlocks)--;\ - } \ - *pdwReg = (uint16_t)((uint16_t)((wNBlocks) << 10) | 0x8000); \ - }/* PCD_CALC_BLK32 */ - -#define PCD_CALC_BLK2(dwReg,wCount,wNBlocks) {\ - (wNBlocks) = (wCount) >> 1;\ - if(((wCount) & 0x1) != 0)\ - { \ - (wNBlocks)++;\ - } \ - *pdwReg = (uint16_t)((wNBlocks) << 10);\ - }/* PCD_CALC_BLK2 */ - -#define PCD_SET_EP_CNT_RX_REG(dwReg,wCount) {\ - uint16_t wNBlocks;\ - if((wCount) > 62) \ - { \ - PCD_CALC_BLK32((dwReg),(wCount),wNBlocks); \ - } \ - else \ - { \ - PCD_CALC_BLK2((dwReg),(wCount),wNBlocks); \ - } \ - }/* PCD_SET_EP_CNT_RX_REG */ - -#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount) {\ - uint32_t *pdwReg = PCD_EP_TX_CNT((USBx), (bEpNum)); \ - PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount));\ - } - -/** - * @brief sets counter for the tx/rx buffer. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @param wCount: Counter value. - * @retval None - */ -#define PCD_SET_EP_TX_CNT(USBx, bEpNum,wCount) (*PCD_EP_TX_CNT((USBx), (bEpNum)) = (wCount)) - - -/** - * @brief gets counter of the tx buffer. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @retval Counter value - */ -#define PCD_GET_EP_TX_CNT(USBx, bEpNum) ((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ff) -#define PCD_GET_EP_RX_CNT(USBx, bEpNum) ((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ff) - -/** - * @brief Sets buffer 0/1 address in a double buffer endpoint. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @param wBuf0Addr: buffer 0 address. - * @retval Counter value - */ -#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum,wBuf0Addr) {PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr));} -#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum,wBuf1Addr) {PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr));} - -/** - * @brief Sets addresses in a double buffer endpoint. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @param wBuf0Addr: buffer 0 address. - * @param wBuf1Addr = buffer 1 address. - * @retval None - */ -#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum,wBuf0Addr,wBuf1Addr) { \ - PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr));\ - PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr));\ - } /* PCD_SET_EP_DBUF_ADDR */ - -/** - * @brief Gets buffer 0/1 address of a double buffer endpoint. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @retval None - */ -#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum))) -#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum))) - -/** - * @brief Gets buffer 0/1 address of a double buffer endpoint. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @param bDir: endpoint dir EP_DBUF_OUT = OUT - * EP_DBUF_IN = IN - * @param wCount: Counter value - * @retval None - */ -#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) { \ - if((bDir) == PCD_EP_DBUF_OUT)\ - /* OUT endpoint */ \ - {PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum),(wCount));} \ - else if((bDir) == PCD_EP_DBUF_IN)\ - /* IN endpoint */ \ - *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \ - } /* SetEPDblBuf0Count*/ - -#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) { \ - if((bDir) == PCD_EP_DBUF_OUT)\ - {/* OUT endpoint */ \ - PCD_SET_EP_RX_CNT((USBx), (bEpNum),(wCount)); \ - } \ - else if((bDir) == PCD_EP_DBUF_IN)\ - {/* IN endpoint */ \ - *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \ - } \ - } /* SetEPDblBuf1Count */ - -#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) {\ - PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \ - PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \ - } /* PCD_SET_EP_DBUF_CNT */ - -/** - * @brief Gets buffer 0/1 rx/tx counter for double buffering. - * @param USBx: USB peripheral instance register address. - * @param bEpNum: Endpoint Number. - * @retval None - */ -#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum))) -#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum))) - -#endif /* USB */ - -/** @defgroup PCD_Instance_definition PCD Instance definition - * @{ - */ -#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F102x6 || STM32F102xB || */ - /* STM32F103x6 || STM32F103xB || */ - /* STM32F103xE || STM32F103xG || */ - /* STM32F105xC || STM32F107xC */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F1xx_HAL_PCD_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h deleted file mode 100644 index 7e20d30..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h +++ /dev/null @@ -1,116 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_pcd_ex.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of Extended PCD HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_PCD_EX_H -#define __STM32F1xx_HAL_PCD_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F102x6) || defined(STM32F102xB) || \ - defined(STM32F103x6) || defined(STM32F103xB) || \ - defined(STM32F103xE) || defined(STM32F103xG) || \ - defined(STM32F105xC) || defined(STM32F107xC) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup PCDEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macros -----------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions - * @{ - */ -/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions - * @{ - */ -#if defined (USB_OTG_FS) -HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size); -HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size); -#endif /* USB_OTG_FS */ - -#if defined (USB) -HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, - uint16_t ep_addr, - uint16_t ep_kind, - uint32_t pmaadress); -#endif /* USB */ -/** - * @} - */ - -/** @addtogroup PCDEx_Exported_Functions_Group2 Peripheral State functions - * @{ - */ -void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state); -/** - * @} - */ -/** - * @} - */ -/** - * @} - */ - -/** - * @} - */ -#endif /* STM32F102x6 || STM32F102xB || */ - /* STM32F103x6 || STM32F103xB || */ - /* STM32F103xE || STM32F103xG || */ - /* STM32F105xC || STM32F107xC */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F1xx_HAL_PCD_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h deleted file mode 100644 index 0c52f59..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h +++ /dev/null @@ -1,406 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_pwr.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of PWR HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_PWR_H -#define __STM32F1xx_HAL_PWR_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup PWR - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Types PWR Exported Types - * @{ - */ - -/** - * @brief PWR PVD configuration structure definition - */ -typedef struct -{ - uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. - This parameter can be a value of @ref PWR_PVD_detection_level */ - - uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. - This parameter can be a value of @ref PWR_PVD_Mode */ -}PWR_PVDTypeDef; - - -/** - * @} - */ - - -/* Internal constants --------------------------------------------------------*/ - -/** @addtogroup PWR_Private_Constants - * @{ - */ - -#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ - -/** - * @} - */ - - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Constants PWR Exported Constants - * @{ - */ - -/** @defgroup PWR_PVD_detection_level PWR PVD detection level - * @{ - */ -#define PWR_PVDLEVEL_0 PWR_CR_PLS_2V2 -#define PWR_PVDLEVEL_1 PWR_CR_PLS_2V3 -#define PWR_PVDLEVEL_2 PWR_CR_PLS_2V4 -#define PWR_PVDLEVEL_3 PWR_CR_PLS_2V5 -#define PWR_PVDLEVEL_4 PWR_CR_PLS_2V6 -#define PWR_PVDLEVEL_5 PWR_CR_PLS_2V7 -#define PWR_PVDLEVEL_6 PWR_CR_PLS_2V8 -#define PWR_PVDLEVEL_7 PWR_CR_PLS_2V9 - -/** - * @} - */ - -/** @defgroup PWR_PVD_Mode PWR PVD Mode - * @{ - */ -#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */ -#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */ -#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */ -#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ -#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */ -#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */ -#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */ - -/** - * @} - */ - - -/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins - * @{ - */ - -#define PWR_WAKEUP_PIN1 PWR_CSR_EWUP - -/** - * @} - */ - -/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR Regulator state in SLEEP/STOP mode - * @{ - */ -#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000) -#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS - -/** - * @} - */ - -/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry - * @{ - */ -#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) -#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) - -/** - * @} - */ - -/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry - * @{ - */ -#define PWR_STOPENTRY_WFI ((uint8_t)0x01) -#define PWR_STOPENTRY_WFE ((uint8_t)0x02) - -/** - * @} - */ - -/** @defgroup PWR_Flag PWR Flag - * @{ - */ -#define PWR_FLAG_WU PWR_CSR_WUF -#define PWR_FLAG_SB PWR_CSR_SBF -#define PWR_FLAG_PVDO PWR_CSR_PVDO - - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup PWR_Exported_Macros PWR Exported Macros - * @{ - */ - -/** @brief Check PWR flag is set or not. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event - * was received from the WKUP pin or from the RTC alarm - * An additional wakeup event is detected if the WKUP pin is enabled - * (by setting the EWUP bit) when the WKUP pin level is already high. - * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was - * resumed from StandBy mode. - * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled - * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode - * For this reason, this bit is equal to 0 after Standby or reset - * until the PVDE bit is set. - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the PWR's pending flags. - * @param __FLAG__: specifies the flag to clear. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag - * @arg PWR_FLAG_SB: StandBy flag - */ -#define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CR, ((__FLAG__) << 2)) - -/** - * @brief Enable interrupt on PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD) - -/** - * @brief Disable interrupt on PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD) - -/** - * @brief Enable event on PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD) - -/** - * @brief Disable event on PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD) - - -/** - * @brief PVD EXTI line configuration: set falling edge trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) - - -/** - * @brief Disable the PVD Extended Interrupt Falling Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) - - -/** - * @brief PVD EXTI line configuration: set rising edge trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) - -/** - * @brief Disable the PVD Extended Interrupt Rising Trigger. - * This parameter can be: - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) - -/** - * @brief PVD EXTI line configuration: set rising & falling edge trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); - -/** - * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. - * This parameter can be: - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); - - - -/** - * @brief Check whether the specified PVD EXTI interrupt flag is set or not. - * @retval EXTI PVD Line Status. - */ -#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) - -/** - * @brief Clear the PVD EXTI flag. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) - -/** - * @brief Generate a Software interrupt on selected EXTI line. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD) -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/** @defgroup PWR_Private_Macros PWR Private Macros - * @{ - */ -#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ - ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ - ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ - ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) - - -#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ - ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ - ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ - ((MODE) == PWR_PVD_MODE_NORMAL)) - -#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1)) - -#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ - ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) - -#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) - -#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE)) - -/** - * @} - */ - - - -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup PWR_Exported_Functions PWR Exported Functions - * @{ - */ - -/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ - -/* Initialization and de-initialization functions *******************************/ -void HAL_PWR_DeInit(void); -void HAL_PWR_EnableBkUpAccess(void); -void HAL_PWR_DisableBkUpAccess(void); - -/** - * @} - */ - -/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions - * @{ - */ - -/* Peripheral Control functions ************************************************/ -void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); -/* #define HAL_PWR_ConfigPVD 12*/ -void HAL_PWR_EnablePVD(void); -void HAL_PWR_DisablePVD(void); - -/* WakeUp pins configuration functions ****************************************/ -void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx); -void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); - -/* Low Power modes configuration functions ************************************/ -void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); -void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); -void HAL_PWR_EnterSTANDBYMode(void); - -void HAL_PWR_EnableSleepOnExit(void); -void HAL_PWR_DisableSleepOnExit(void); -void HAL_PWR_EnableSEVOnPend(void); -void HAL_PWR_DisableSEVOnPend(void); - - - -void HAL_PWR_PVD_IRQHandler(void); -void HAL_PWR_PVDCallback(void); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F1xx_HAL_PWR_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h deleted file mode 100644 index 0ef33fe..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h +++ /dev/null @@ -1,1395 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_rcc.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of RCC HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_RCC_H -#define __STM32F1xx_HAL_RCC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup RCC - * @{ - */ - -/** @addtogroup RCC_Private_Constants - * @{ - */ - -/** @defgroup RCC_Timeout RCC Timeout - * @{ - */ - -/* Disable Backup domain write protection state change timeout */ -#define RCC_DBP_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */ -/* LSE state change timeout */ -#define RCC_LSE_TIMEOUT_VALUE LSE_STARTUP_TIMEOUT -#define CLOCKSWITCH_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */ -#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT -#define HSI_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms (minimum Tick + 1) */ -#define LSI_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms (minimum Tick + 1) */ -#define PLL_TIMEOUT_VALUE ((uint32_t)2) /* 2 ms (minimum Tick + 1) */ -#define LSI_VALUE ((uint32_t)40000) /* 40kHz */ -/** - * @} - */ - -/** @defgroup RCC_Register_Offset Register offsets - * @{ - */ -#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) -#define RCC_CR_OFFSET 0x00 -#define RCC_CFGR_OFFSET 0x04 -#define RCC_CIR_OFFSET 0x08 -#define RCC_BDCR_OFFSET 0x20 -#define RCC_CSR_OFFSET 0x24 - -/** - * @} - */ - -/** @defgroup RCC_BitAddress_AliasRegion BitAddress AliasRegion - * @brief RCC registers bit address in the alias region - * @{ - */ -#define RCC_CR_OFFSET_BB (RCC_OFFSET + RCC_CR_OFFSET) -#define RCC_CFGR_OFFSET_BB (RCC_OFFSET + RCC_CFGR_OFFSET) -#define RCC_CIR_OFFSET_BB (RCC_OFFSET + RCC_CIR_OFFSET) -#define RCC_BDCR_OFFSET_BB (RCC_OFFSET + RCC_BDCR_OFFSET) -#define RCC_CSR_OFFSET_BB (RCC_OFFSET + RCC_CSR_OFFSET) - -/* --- CR Register ---*/ -/* Alias word address of HSION bit */ -#define RCC_HSION_BIT_NUMBER POSITION_VAL(RCC_CR_HSION) -#define RCC_CR_HSION_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (RCC_HSION_BIT_NUMBER * 4))) -/* Alias word address of HSEON bit */ -#define RCC_HSEON_BIT_NUMBER POSITION_VAL(RCC_CR_HSEON) -#define RCC_CR_HSEON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (RCC_HSEON_BIT_NUMBER * 4))) -/* Alias word address of CSSON bit */ -#define RCC_CSSON_BIT_NUMBER POSITION_VAL(RCC_CR_CSSON) -#define RCC_CR_CSSON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (RCC_CSSON_BIT_NUMBER * 4))) -/* Alias word address of PLLON bit */ -#define RCC_PLLON_BIT_NUMBER POSITION_VAL(RCC_CR_PLLON) -#define RCC_CR_PLLON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (RCC_PLLON_BIT_NUMBER * 4))) - -/* --- CSR Register ---*/ -/* Alias word address of LSION bit */ -#define RCC_LSION_BIT_NUMBER POSITION_VAL(RCC_CSR_LSION) -#define RCC_CSR_LSION_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32) + (RCC_LSION_BIT_NUMBER * 4))) - -/* Alias word address of RMVF bit */ -#define RCC_RMVF_BIT_NUMBER POSITION_VAL(RCC_CSR_RMVF) -#define RCC_CSR_RMVF_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CSR_OFFSET_BB * 32) + (RCC_RMVF_BIT_NUMBER * 4))) - -/* --- BDCR Registers ---*/ -/* Alias word address of LSEON bit */ -#define RCC_LSEON_BIT_NUMBER POSITION_VAL(RCC_BDCR_LSEON) -#define RCC_BDCR_LSEON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32) + (RCC_LSEON_BIT_NUMBER * 4))) - -/* Alias word address of LSEON bit */ -#define RCC_LSEBYP_BIT_NUMBER POSITION_VAL(RCC_BDCR_LSEBYP) -#define RCC_BDCR_LSEBYP_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32) + (RCC_LSEBYP_BIT_NUMBER * 4))) - -/* Alias word address of RTCEN bit */ -#define RCC_RTCEN_BIT_NUMBER POSITION_VAL(RCC_BDCR_RTCEN) -#define RCC_BDCR_RTCEN_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32) + (RCC_RTCEN_BIT_NUMBER * 4))) - -/* Alias word address of BDRST bit */ -#define RCC_BDRST_BIT_NUMBER POSITION_VAL(RCC_BDCR_BDRST) -#define RCC_BDCR_BDRST_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_BDCR_OFFSET_BB * 32) + (RCC_BDRST_BIT_NUMBER * 4))) - -/** - * @} - */ - -/* CR register byte 2 (Bits[23:16]) base address */ -#define RCC_CR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CR_OFFSET + 0x02)) - -/* CIR register byte 1 (Bits[15:8]) base address */ -#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x01)) - -/* CIR register byte 2 (Bits[23:16]) base address */ -#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + RCC_CIR_OFFSET + 0x02)) - -/* Defines used for Flags */ -#define CR_REG_INDEX ((uint8_t)1) -#define BDCR_REG_INDEX ((uint8_t)2) -#define CSR_REG_INDEX ((uint8_t)3) - -#define RCC_FLAG_MASK ((uint8_t)0x1F) - -/** - * @} - */ - -/** @addtogroup RCC_Private_Macros - * @{ - */ -/** @defgroup RCC_Alias_For_Legacy Alias define maintained for legacy - * @{ - */ -#define __HAL_RCC_SYSCFG_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE -#define __HAL_RCC_SYSCFG_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE -#define __HAL_RCC_SYSCFG_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET -#define __HAL_RCC_SYSCFG_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET -/** - * @} - */ - -#define IS_RCC_PLLSOURCE(__SOURCE__) (((__SOURCE__) == RCC_PLLSOURCE_HSI_DIV2) || \ - ((__SOURCE__) == RCC_PLLSOURCE_HSE)) -#define IS_RCC_OSCILLATORTYPE(__OSCILLATOR__) (((__OSCILLATOR__) == RCC_OSCILLATORTYPE_NONE) || \ - (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \ - (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \ - (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \ - (((__OSCILLATOR__) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)) -#define IS_RCC_HSE(__HSE__) (((__HSE__) == RCC_HSE_OFF) || ((__HSE__) == RCC_HSE_ON) || \ - ((__HSE__) == RCC_HSE_BYPASS)) -#define IS_RCC_LSE(__LSE__) (((__LSE__) == RCC_LSE_OFF) || ((__LSE__) == RCC_LSE_ON) || \ - ((__LSE__) == RCC_LSE_BYPASS)) -#define IS_RCC_HSI(__HSI__) (((__HSI__) == RCC_HSI_OFF) || ((__HSI__) == RCC_HSI_ON)) -#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x1F) -#define IS_RCC_LSI(__LSI__) (((__LSI__) == RCC_LSI_OFF) || ((__LSI__) == RCC_LSI_ON)) -#define IS_RCC_PLL(__PLL__) (((__PLL__) == RCC_PLL_NONE) || ((__PLL__) == RCC_PLL_OFF) || \ - ((__PLL__) == RCC_PLL_ON)) - -#define IS_RCC_CLOCKTYPE(CLK) ((((CLK) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \ - (((CLK) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \ - (((CLK) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) || \ - (((CLK) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)) -#define IS_RCC_SYSCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_HSI) || \ - ((__SOURCE__) == RCC_SYSCLKSOURCE_HSE) || \ - ((__SOURCE__) == RCC_SYSCLKSOURCE_PLLCLK)) -#define IS_RCC_SYSCLKSOURCE_STATUS(__SOURCE__) (((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_HSI) || \ - ((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_HSE) || \ - ((__SOURCE__) == RCC_SYSCLKSOURCE_STATUS_PLLCLK)) -#define IS_RCC_HCLK(__HCLK__) (((__HCLK__) == RCC_SYSCLK_DIV1) || ((__HCLK__) == RCC_SYSCLK_DIV2) || \ - ((__HCLK__) == RCC_SYSCLK_DIV4) || ((__HCLK__) == RCC_SYSCLK_DIV8) || \ - ((__HCLK__) == RCC_SYSCLK_DIV16) || ((__HCLK__) == RCC_SYSCLK_DIV64) || \ - ((__HCLK__) == RCC_SYSCLK_DIV128) || ((__HCLK__) == RCC_SYSCLK_DIV256) || \ - ((__HCLK__) == RCC_SYSCLK_DIV512)) -#define IS_RCC_PCLK(__PCLK__) (((__PCLK__) == RCC_HCLK_DIV1) || ((__PCLK__) == RCC_HCLK_DIV2) || \ - ((__PCLK__) == RCC_HCLK_DIV4) || ((__PCLK__) == RCC_HCLK_DIV8) || \ - ((__PCLK__) == RCC_HCLK_DIV16)) -#define IS_RCC_MCO(__MCO__) ((__MCO__) == RCC_MCO) -#define IS_RCC_MCODIV(__DIV__) (((__DIV__) == RCC_MCODIV_1)) -#define IS_RCC_RTCCLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_RTCCLKSOURCE_NO_CLK) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_LSE) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_LSI) || \ - ((__SOURCE__) == RCC_RTCCLKSOURCE_HSE_DIV128)) - -/** - * @} - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup RCC_Exported_Types RCC Exported Types - * @{ - */ - -/** - * @brief RCC PLL configuration structure definition - */ -typedef struct -{ - uint32_t PLLState; /*!< PLLState: The new state of the PLL. - This parameter can be a value of @ref RCC_PLL_Config */ - - uint32_t PLLSource; /*!< PLLSource: PLL entry clock source. - This parameter must be a value of @ref RCC_PLL_Clock_Source */ - - uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock - This parameter must be a value of @ref RCCEx_PLL_Multiplication_Factor */ -} RCC_PLLInitTypeDef; - -/** - * @brief RCC System, AHB and APB busses clock configuration structure definition - */ -typedef struct -{ - uint32_t ClockType; /*!< The clock to be configured. - This parameter can be a value of @ref RCC_System_Clock_Type */ - - uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock. - This parameter can be a value of @ref RCC_System_Clock_Source */ - - uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). - This parameter can be a value of @ref RCC_AHB_Clock_Source */ - - uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ - - uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ -} RCC_ClkInitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCC_Exported_Constants RCC Exported Constants - * @{ - */ - -/** @defgroup RCC_PLL_Clock_Source PLL Clock Source - * @{ - */ - -#define RCC_PLLSOURCE_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ -#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC /*!< HSE clock selected as PLL entry clock source */ - -/** - * @} - */ - -/** @defgroup RCC_Oscillator_Type Oscillator Type - * @{ - */ -#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000) -#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001) -#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002) -#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004) -#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008) -/** - * @} - */ - -/** @defgroup RCC_HSE_Config HSE Config - * @{ - */ -#define RCC_HSE_OFF ((uint32_t)0x00000000) /*!< HSE clock deactivation */ -#define RCC_HSE_ON RCC_CR_HSEON /*!< HSE clock activation */ -#define RCC_HSE_BYPASS ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON)) /*!< External clock source for HSE clock */ -/** - * @} - */ - -/** @defgroup RCC_LSE_Config LSE Config - * @{ - */ -#define RCC_LSE_OFF ((uint32_t)0x00000000) /*!< LSE clock deactivation */ -#define RCC_LSE_ON RCC_BDCR_LSEON /*!< LSE clock activation */ -#define RCC_LSE_BYPASS ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON)) /*!< External clock source for LSE clock */ - -/** - * @} - */ - -/** @defgroup RCC_HSI_Config HSI Config - * @{ - */ -#define RCC_HSI_OFF ((uint32_t)0x00000000) /*!< HSI clock deactivation */ -#define RCC_HSI_ON RCC_CR_HSION /*!< HSI clock activation */ - -#define RCC_HSICALIBRATION_DEFAULT ((uint32_t)0x10) /* Default HSI calibration trimming value */ - -/** - * @} - */ - -/** @defgroup RCC_LSI_Config LSI Config - * @{ - */ -#define RCC_LSI_OFF ((uint32_t)0x00000000) /*!< LSI clock deactivation */ -#define RCC_LSI_ON RCC_CSR_LSION /*!< LSI clock activation */ - -/** - * @} - */ - -/** @defgroup RCC_PLL_Config PLL Config - * @{ - */ -#define RCC_PLL_NONE ((uint32_t)0x00000000) /*!< PLL is not configured */ -#define RCC_PLL_OFF ((uint32_t)0x00000001) /*!< PLL deactivation */ -#define RCC_PLL_ON ((uint32_t)0x00000002) /*!< PLL activation */ - -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Type System Clock Type - * @{ - */ -#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001) /*!< SYSCLK to configure */ -#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002) /*!< HCLK to configure */ -#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004) /*!< PCLK1 to configure */ -#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008) /*!< PCLK2 to configure */ - -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Source System Clock Source - * @{ - */ -#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selected as system clock */ -#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selected as system clock */ -#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL /*!< PLL selected as system clock */ - -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status - * @{ - */ -#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ - -/** - * @} - */ - -/** @defgroup RCC_AHB_Clock_Source AHB Clock Source - * @{ - */ -#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */ -#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */ -#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */ -#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */ -#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */ -#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */ -#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */ -#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */ -#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */ - -/** - * @} - */ - -/** @defgroup RCC_APB1_APB2_Clock_Source APB1 APB2 Clock Source - * @{ - */ -#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */ -#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */ -#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */ -#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */ -#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */ - -/** - * @} - */ - -/** @defgroup RCC_RTC_Clock_Source RTC Clock Source - * @{ - */ -#define RCC_RTCCLKSOURCE_NO_CLK ((uint32_t)0x00000000) /*!< No clock */ -#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE /*!< LSE oscillator clock used as RTC clock */ -#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI /*!< LSI oscillator clock used as RTC clock */ -#define RCC_RTCCLKSOURCE_HSE_DIV128 RCC_BDCR_RTCSEL_HSE /*!< HSE oscillator clock divided by 128 used as RTC clock */ -/** - * @} - */ - - -/** @defgroup RCC_MCO_Index MCO Index - * @{ - */ -#define RCC_MCO1 ((uint32_t)0x00000000) -#define RCC_MCO RCC_MCO1 /*!< MCO1 to be compliant with other families with 2 MCOs*/ - -/** - * @} - */ - -/** @defgroup RCC_MCOx_Clock_Prescaler MCO Clock Prescaler - * @{ - */ -#define RCC_MCODIV_1 ((uint32_t)0x00000000) - -/** - * @} - */ - -/** @defgroup RCC_Interrupt Interrupts - * @{ - */ -#define RCC_IT_LSIRDY ((uint8_t)RCC_CIR_LSIRDYF) /*!< LSI Ready Interrupt flag */ -#define RCC_IT_LSERDY ((uint8_t)RCC_CIR_LSERDYF) /*!< LSE Ready Interrupt flag */ -#define RCC_IT_HSIRDY ((uint8_t)RCC_CIR_HSIRDYF) /*!< HSI Ready Interrupt flag */ -#define RCC_IT_HSERDY ((uint8_t)RCC_CIR_HSERDYF) /*!< HSE Ready Interrupt flag */ -#define RCC_IT_PLLRDY ((uint8_t)RCC_CIR_PLLRDYF) /*!< PLL Ready Interrupt flag */ -#define RCC_IT_CSS ((uint8_t)RCC_CIR_CSSF) /*!< Clock Security System Interrupt flag */ -/** - * @} - */ - -/** @defgroup RCC_Flag Flags - * Elements values convention: XXXYYYYYb - * - YYYYY : Flag position in the register - * - XXX : Register index - * - 001: CR register - * - 010: BDCR register - * - 011: CSR register - * @{ - */ -/* Flags in the CR register */ -#define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_HSIRDY))) /*!< Internal High Speed clock ready flag */ -#define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_HSERDY))) /*!< External High Speed clock ready flag */ -#define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_PLLRDY))) /*!< PLL clock ready flag */ - -/* Flags in the CSR register */ -#define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_LSIRDY))) /*!< Internal Low Speed oscillator Ready */ -#define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_PINRSTF))) /*!< PIN reset flag */ -#define RCC_FLAG_PORRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_PORRSTF))) /*!< POR/PDR reset flag */ -#define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_SFTRSTF))) /*!< Software Reset flag */ -#define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_IWDGRSTF))) /*!< Independent Watchdog reset flag */ -#define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_WWDGRSTF))) /*!< Window watchdog reset flag */ -#define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5) | POSITION_VAL(RCC_CSR_LPWRRSTF))) /*!< Low-Power reset flag */ - -/* Flags in the BDCR register */ -#define RCC_FLAG_LSERDY ((uint8_t)((BDCR_REG_INDEX << 5) | POSITION_VAL(RCC_BDCR_LSERDY))) /*!< External Low Speed oscillator Ready */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/** @defgroup RCC_Exported_Macros RCC Exported Macros - * @{ - */ - -/** @defgroup RCC_Peripheral_Clock_Enable_Disable Peripheral Clock Enable Disable - * @brief Enable or disable the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_SRAM_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SRAMEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_FLITF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FLITFEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN)) -#define __HAL_RCC_SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN)) -#define __HAL_RCC_FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN)) - -/** - * @} - */ - -/** @defgroup RCC_AHB_Peripheral_Clock_Enable_Disable_Status AHB Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#define __HAL_RCC_DMA1_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) != RESET) -#define __HAL_RCC_DMA1_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA1EN)) == RESET) -#define __HAL_RCC_SRAM_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) != RESET) -#define __HAL_RCC_SRAM_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SRAMEN)) == RESET) -#define __HAL_RCC_FLITF_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) != RESET) -#define __HAL_RCC_FLITF_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FLITFEN)) == RESET) -#define __HAL_RCC_CRC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) != RESET) -#define __HAL_RCC_CRC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_CRCEN)) == RESET) - -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_USART2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_BKP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_BKPEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_BKPEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_PWR_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN)) -#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN)) -#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN)) - -#define __HAL_RCC_BKP_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_BKPEN)) -#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN)) - -/** - * @} - */ - -/** @defgroup RCC_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#define __HAL_RCC_TIM2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET) -#define __HAL_RCC_TIM2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET) -#define __HAL_RCC_TIM3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET) -#define __HAL_RCC_TIM3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET) -#define __HAL_RCC_WWDG_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET) -#define __HAL_RCC_WWDG_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET) -#define __HAL_RCC_USART2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET) -#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET) -#define __HAL_RCC_I2C1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET) -#define __HAL_RCC_I2C1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET) -#define __HAL_RCC_BKP_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_BKPEN)) != RESET) -#define __HAL_RCC_BKP_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_BKPEN)) == RESET) -#define __HAL_RCC_PWR_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET) -#define __HAL_RCC_PWR_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET) - -/** - * @} - */ - -/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_AFIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_AFIOEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_AFIOEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPAEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPAEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPBEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPBEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPCEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPCEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_ADC1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_USART1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ - /* Delay after an RCC peripheral clock enabling */\ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_AFIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_AFIOEN)) -#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPAEN)) -#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPBEN)) -#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPCEN)) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPDEN)) -#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN)) - -#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN)) -#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN)) -#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN)) - -/** - * @} - */ - -/** @defgroup RCC_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#define __HAL_RCC_AFIO_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_AFIOEN)) != RESET) -#define __HAL_RCC_AFIO_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_AFIOEN)) == RESET) -#define __HAL_RCC_GPIOA_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPAEN)) != RESET) -#define __HAL_RCC_GPIOA_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPAEN)) == RESET) -#define __HAL_RCC_GPIOB_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPBEN)) != RESET) -#define __HAL_RCC_GPIOB_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPBEN)) == RESET) -#define __HAL_RCC_GPIOC_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPCEN)) != RESET) -#define __HAL_RCC_GPIOC_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPCEN)) == RESET) -#define __HAL_RCC_GPIOD_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPDEN)) != RESET) -#define __HAL_RCC_GPIOD_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPDEN)) == RESET) -#define __HAL_RCC_ADC1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET) -#define __HAL_RCC_ADC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET) -#define __HAL_RCC_TIM1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET) -#define __HAL_RCC_TIM1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET) -#define __HAL_RCC_SPI1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET) -#define __HAL_RCC_SPI1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET) -#define __HAL_RCC_USART1_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET) -#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET) - -/** - * @} - */ - -/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST)) -#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST)) -#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST)) - -#define __HAL_RCC_BKP_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_BKPRST)) -#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST)) - -#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00) -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST)) -#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST)) -#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST)) - -#define __HAL_RCC_BKP_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_BKPRST)) -#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST)) - -/** - * @} - */ - -/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFFU) -#define __HAL_RCC_AFIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_AFIORST)) -#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPARST)) -#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPBRST)) -#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPCRST)) -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPDRST)) -#define __HAL_RCC_ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST)) - -#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST)) -#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST)) -#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST)) - -#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00) -#define __HAL_RCC_AFIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_AFIORST)) -#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPARST)) -#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPBRST)) -#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPCRST)) -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPDRST)) -#define __HAL_RCC_ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST)) - -#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST)) -#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST)) -#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST)) - -/** - * @} - */ - -/** @defgroup RCC_HSI_Configuration HSI Configuration - * @{ - */ - -/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). - * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. - * @note HSI can not be stopped if it is used as system clock source. In this case, - * you have to select another source of the system clock then stop the HSI. - * @note After enabling the HSI, the application software should wait on HSIRDY - * flag to be set indicating that HSI clock is stable and can be used as - * system clock source. - * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator - * clock cycles. - */ -#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE) -#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE) - -/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. - * @note The calibration is used to compensate for the variations in voltage - * and temperature that influence the frequency of the internal HSI RC. - * @param _HSICALIBRATIONVALUE_ specifies the calibration trimming value. - * (default is RCC_HSICALIBRATION_DEFAULT). - * This parameter must be a number between 0 and 0x1F. - */ -#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(_HSICALIBRATIONVALUE_) \ - (MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(_HSICALIBRATIONVALUE_) << POSITION_VAL(RCC_CR_HSITRIM))) - -/** - * @} - */ - -/** @defgroup RCC_LSI_Configuration LSI Configuration - * @{ - */ - -/** @brief Macro to enable the Internal Low Speed oscillator (LSI). - * @note After enabling the LSI, the application software should wait on - * LSIRDY flag to be set indicating that LSI clock is stable and can - * be used to clock the IWDG and/or the RTC. - */ -#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE) - -/** @brief Macro to disable the Internal Low Speed oscillator (LSI). - * @note LSI can not be disabled if the IWDG is running. - * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator - * clock cycles. - */ -#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE) - -/** - * @} - */ - -/** @defgroup RCC_HSE_Configuration HSE Configuration - * @{ - */ - -/** - * @brief Macro to configure the External High Speed oscillator (HSE). - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not - * supported by this macro. User should request a transition to HSE Off - * first and then HSE On or HSE Bypass. - * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application - * software should wait on HSERDY flag to be set indicating that HSE clock - * is stable and can be used to clock the PLL and/or system clock. - * @note HSE state can not be changed if it is used directly or through the - * PLL as system clock. In this case, you have to select another source - * of the system clock then change the HSE state (ex. disable it). - * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. - * @note This function reset the CSSON bit, so if the clock security system(CSS) - * was previously enabled you have to enable it again after calling this - * function. - * @param __STATE__ specifies the new state of the HSE. - * This parameter can be one of the following values: - * @arg @ref RCC_HSE_OFF turn OFF the HSE oscillator, HSERDY flag goes low after - * 6 HSE oscillator clock cycles. - * @arg @ref RCC_HSE_ON turn ON the HSE oscillator - * @arg @ref RCC_HSE_BYPASS HSE oscillator bypassed with external clock - */ -#define __HAL_RCC_HSE_CONFIG(__STATE__) \ - do{ \ - if ((__STATE__) == RCC_HSE_ON) \ - { \ - SET_BIT(RCC->CR, RCC_CR_HSEON); \ - } \ - else if ((__STATE__) == RCC_HSE_OFF) \ - { \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ - } \ - else if ((__STATE__) == RCC_HSE_BYPASS) \ - { \ - SET_BIT(RCC->CR, RCC_CR_HSEBYP); \ - SET_BIT(RCC->CR, RCC_CR_HSEON); \ - } \ - else \ - { \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON); \ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); \ - } \ - }while(0) - -/** - * @} - */ - -/** @defgroup RCC_LSE_Configuration LSE Configuration - * @{ - */ - -/** - * @brief Macro to configure the External Low Speed oscillator (LSE). - * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. - * @note As the LSE is in the Backup domain and write access is denied to - * this domain after reset, you have to enable write access using - * @ref HAL_PWR_EnableBkUpAccess() function before to configure the LSE - * (to be done once after reset). - * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application - * software should wait on LSERDY flag to be set indicating that LSE clock - * is stable and can be used to clock the RTC. - * @param __STATE__ specifies the new state of the LSE. - * This parameter can be one of the following values: - * @arg @ref RCC_LSE_OFF turn OFF the LSE oscillator, LSERDY flag goes low after - * 6 LSE oscillator clock cycles. - * @arg @ref RCC_LSE_ON turn ON the LSE oscillator. - * @arg @ref RCC_LSE_BYPASS LSE oscillator bypassed with external clock. - */ -#define __HAL_RCC_LSE_CONFIG(__STATE__) \ - do{ \ - if ((__STATE__) == RCC_LSE_ON) \ - { \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - } \ - else if ((__STATE__) == RCC_LSE_OFF) \ - { \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - } \ - else if ((__STATE__) == RCC_LSE_BYPASS) \ - { \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - SET_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - } \ - else \ - { \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON); \ - CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \ - } \ - }while(0) - -/** - * @} - */ - -/** @defgroup RCC_PLL_Configuration PLL Configuration - * @{ - */ - -/** @brief Macro to enable the main PLL. - * @note After enabling the main PLL, the application software should wait on - * PLLRDY flag to be set indicating that PLL clock is stable and can - * be used as system clock source. - * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE) - -/** @brief Macro to disable the main PLL. - * @note The main PLL can not be disabled if it is used as system clock source - */ -#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE) - -/** @brief Macro to configure the main PLL clock source and multiplication factors. - * @note This function must be used only when the main PLL is disabled. - * - * @param __RCC_PLLSOURCE__ specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_PLLSOURCE_HSI_DIV2 HSI oscillator clock selected as PLL clock entry - * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL clock entry - * @param __PLLMUL__ specifies the multiplication factor for PLL VCO output clock - * This parameter can be one of the following values: - * @arg @ref RCC_PLL_MUL4 PLLVCO = PLL clock entry x 4 - * @arg @ref RCC_PLL_MUL6 PLLVCO = PLL clock entry x 6 - @if STM32F105xC - * @arg @ref RCC_PLL_MUL6_5 PLLVCO = PLL clock entry x 6.5 - @elseif STM32F107xC - * @arg @ref RCC_PLL_MUL6_5 PLLVCO = PLL clock entry x 6.5 - @else - * @arg @ref RCC_PLL_MUL2 PLLVCO = PLL clock entry x 2 - * @arg @ref RCC_PLL_MUL3 PLLVCO = PLL clock entry x 3 - * @arg @ref RCC_PLL_MUL10 PLLVCO = PLL clock entry x 10 - * @arg @ref RCC_PLL_MUL11 PLLVCO = PLL clock entry x 11 - * @arg @ref RCC_PLL_MUL12 PLLVCO = PLL clock entry x 12 - * @arg @ref RCC_PLL_MUL13 PLLVCO = PLL clock entry x 13 - * @arg @ref RCC_PLL_MUL14 PLLVCO = PLL clock entry x 14 - * @arg @ref RCC_PLL_MUL15 PLLVCO = PLL clock entry x 15 - * @arg @ref RCC_PLL_MUL16 PLLVCO = PLL clock entry x 16 - @endif - * @arg @ref RCC_PLL_MUL8 PLLVCO = PLL clock entry x 8 - * @arg @ref RCC_PLL_MUL9 PLLVCO = PLL clock entry x 9 - * - */ -#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSOURCE__, __PLLMUL__)\ - MODIFY_REG(RCC->CFGR, (RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL),((__RCC_PLLSOURCE__) | (__PLLMUL__) )) - -/** @brief Get oscillator clock selected as PLL input clock - * @retval The clock source used for PLL entry. The returned value can be one - * of the following: - * @arg @ref RCC_PLLSOURCE_HSI_DIV2 HSI oscillator clock selected as PLL input clock - * @arg @ref RCC_PLLSOURCE_HSE HSE oscillator clock selected as PLL input clock - */ -#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC))) - -/** - * @} - */ - -/** @defgroup RCC_Get_Clock_source Get Clock source - * @{ - */ - -/** - * @brief Macro to configure the system clock source. - * @param __SYSCLKSOURCE__ specifies the system clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_SYSCLKSOURCE_HSI HSI oscillator is used as system clock source. - * @arg @ref RCC_SYSCLKSOURCE_HSE HSE oscillator is used as system clock source. - * @arg @ref RCC_SYSCLKSOURCE_PLLCLK PLL output is used as system clock source. - */ -#define __HAL_RCC_SYSCLK_CONFIG(__SYSCLKSOURCE__) \ - MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__SYSCLKSOURCE__)) - -/** @brief Macro to get the clock source used as system clock. - * @retval The clock source used as system clock. The returned value can be one - * of the following: - * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSI HSI used as system clock - * @arg @ref RCC_SYSCLKSOURCE_STATUS_HSE HSE used as system clock - * @arg @ref RCC_SYSCLKSOURCE_STATUS_PLLCLK PLL used as system clock - */ -#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR,RCC_CFGR_SWS))) - -/** - * @} - */ - -/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config - * @{ - */ - -#if defined(RCC_CFGR_MCO_3) -/** @brief Macro to configure the MCO clock. - * @param __MCOCLKSOURCE__ specifies the MCO clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock (SYSCLK) selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock divided by 2 selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_PLL2CLK PLL2 clock selected by 2 selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_PLL3CLK_DIV2 PLL3 clock divided by 2 selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_EXT_HSE XT1 external 3-25 MHz oscillator clock selected (for Ethernet) as MCO clock - * @arg @ref RCC_MCO1SOURCE_PLL3CLK PLL3 clock selected (for Ethernet) as MCO clock - * @param __MCODIV__ specifies the MCO clock prescaler. - * This parameter can be one of the following values: - * @arg @ref RCC_MCODIV_1 No division applied on MCO clock source - */ -#else -/** @brief Macro to configure the MCO clock. - * @param __MCOCLKSOURCE__ specifies the MCO clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock (SYSCLK) selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock divided by 2 selected as MCO clock - * @param __MCODIV__ specifies the MCO clock prescaler. - * This parameter can be one of the following values: - * @arg @ref RCC_MCODIV_1 No division applied on MCO clock source - */ -#endif - -#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \ - MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, (__MCOCLKSOURCE__)) - - -/** - * @} - */ - - /** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration - * @{ - */ - -/** @brief Macro to configure the RTC clock (RTCCLK). - * @note As the RTC clock configuration bits are in the Backup domain and write - * access is denied to this domain after reset, you have to enable write - * access using the Power Backup Access macro before to configure - * the RTC clock source (to be done once after reset). - * @note Once the RTC clock is configured it can't be changed unless the - * Backup domain is reset using @ref __HAL_RCC_BACKUPRESET_FORCE() macro, or by - * a Power On Reset (POR). - * - * @param __RTC_CLKSOURCE__ specifies the RTC clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV128 HSE divided by 128 selected as RTC clock - * @note If the LSE or LSI is used as RTC clock source, the RTC continues to - * work in STOP and STANDBY modes, and can be used as wakeup source. - * However, when the HSE clock is used as RTC clock source, the RTC - * cannot be used in STOP and STANDBY modes. - * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as - * RTC clock source). - */ -#define __HAL_RCC_RTC_CONFIG(__RTC_CLKSOURCE__) MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (__RTC_CLKSOURCE__)) - -/** @brief Macro to get the RTC clock source. - * @retval The clock source can be one of the following values: - * @arg @ref RCC_RTCCLKSOURCE_NO_CLK No clock selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_LSE LSE selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_LSI LSI selected as RTC clock - * @arg @ref RCC_RTCCLKSOURCE_HSE_DIV128 HSE divided by 128 selected as RTC clock - */ -#define __HAL_RCC_GET_RTC_SOURCE() (READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)) - -/** @brief Macro to enable the the RTC clock. - * @note These macros must be used only after the RTC clock source was selected. - */ -#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE) - -/** @brief Macro to disable the the RTC clock. - * @note These macros must be used only after the RTC clock source was selected. - */ -#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE) - -/** @brief Macro to force the Backup domain reset. - * @note This function resets the RTC peripheral (including the backup registers) - * and the RTC clock source selection in RCC_BDCR register. - */ -#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE) - -/** @brief Macros to release the Backup domain reset. - */ -#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE) - -/** - * @} - */ - -/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management - * @brief macros to manage the specified RCC Flags and interrupts. - * @{ - */ - -/** @brief Enable RCC interrupt. - * @param __INTERRUPT__ specifies the RCC interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg @ref RCC_IT_LSIRDY LSI ready interrupt - * @arg @ref RCC_IT_LSERDY LSE ready interrupt - * @arg @ref RCC_IT_HSIRDY HSI ready interrupt - * @arg @ref RCC_IT_HSERDY HSE ready interrupt - * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt - @if STM32F105xx - * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. - * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. - @elsif STM32F107xx - * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. - * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. - @endif - */ -#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__)) - -/** @brief Disable RCC interrupt. - * @param __INTERRUPT__ specifies the RCC interrupt sources to be disabled. - * This parameter can be any combination of the following values: - * @arg @ref RCC_IT_LSIRDY LSI ready interrupt - * @arg @ref RCC_IT_LSERDY LSE ready interrupt - * @arg @ref RCC_IT_HSIRDY HSI ready interrupt - * @arg @ref RCC_IT_HSERDY HSE ready interrupt - * @arg @ref RCC_IT_PLLRDY main PLL ready interrupt - @if STM32F105xx - * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. - * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. - @elsif STM32F107xx - * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. - * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. - @endif - */ -#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= (uint8_t)(~(__INTERRUPT__))) - -/** @brief Clear the RCC's interrupt pending bits. - * @param __INTERRUPT__ specifies the interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg @ref RCC_IT_LSIRDY LSI ready interrupt. - * @arg @ref RCC_IT_LSERDY LSE ready interrupt. - * @arg @ref RCC_IT_HSIRDY HSI ready interrupt. - * @arg @ref RCC_IT_HSERDY HSE ready interrupt. - * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt. - @if STM32F105xx - * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. - * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. - @elsif STM32F107xx - * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. - * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. - @endif - * @arg @ref RCC_IT_CSS Clock Security System interrupt - */ -#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__)) - -/** @brief Check the RCC's interrupt has occurred or not. - * @param __INTERRUPT__ specifies the RCC interrupt source to check. - * This parameter can be one of the following values: - * @arg @ref RCC_IT_LSIRDY LSI ready interrupt. - * @arg @ref RCC_IT_LSERDY LSE ready interrupt. - * @arg @ref RCC_IT_HSIRDY HSI ready interrupt. - * @arg @ref RCC_IT_HSERDY HSE ready interrupt. - * @arg @ref RCC_IT_PLLRDY Main PLL ready interrupt. - @if STM32F105xx - * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. - * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. - @elsif STM32F107xx - * @arg @ref RCC_IT_PLL2RDY Main PLL2 ready interrupt. - * @arg @ref RCC_IT_PLLI2S2RDY Main PLLI2S ready interrupt. - @endif - * @arg @ref RCC_IT_CSS Clock Security System interrupt - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** @brief Set RMVF bit to clear the reset flags. - * The reset flags are RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, - * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST - */ -#define __HAL_RCC_CLEAR_RESET_FLAGS() (*(__IO uint32_t *)RCC_CSR_RMVF_BB = ENABLE) - -/** @brief Check RCC flag is set or not. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref RCC_FLAG_HSIRDY HSI oscillator clock ready. - * @arg @ref RCC_FLAG_HSERDY HSE oscillator clock ready. - * @arg @ref RCC_FLAG_PLLRDY Main PLL clock ready. - @if STM32F105xx - * @arg @ref RCC_FLAG_PLL2RDY Main PLL2 clock ready. - * @arg @ref RCC_FLAG_PLLI2SRDY Main PLLI2S clock ready. - @elsif STM32F107xx - * @arg @ref RCC_FLAG_PLL2RDY Main PLL2 clock ready. - * @arg @ref RCC_FLAG_PLLI2SRDY Main PLLI2S clock ready. - @endif - * @arg @ref RCC_FLAG_LSERDY LSE oscillator clock ready. - * @arg @ref RCC_FLAG_LSIRDY LSI oscillator clock ready. - * @arg @ref RCC_FLAG_PINRST Pin reset. - * @arg @ref RCC_FLAG_PORRST POR/PDR reset. - * @arg @ref RCC_FLAG_SFTRST Software reset. - * @arg @ref RCC_FLAG_IWDGRST Independent Watchdog reset. - * @arg @ref RCC_FLAG_WWDGRST Window Watchdog reset. - * @arg @ref RCC_FLAG_LPWRRST Low Power reset. - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5) == CR_REG_INDEX)? RCC->CR : \ - ((((__FLAG__) >> 5) == BDCR_REG_INDEX)? RCC->BDCR : \ - RCC->CSR)) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK))) - -/** - * @} - */ - -/** - * @} - */ - -/* Include RCC HAL Extension module */ -#include "stm32f1xx_hal_rcc_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup RCC_Exported_Functions - * @{ - */ - -/** @addtogroup RCC_Exported_Functions_Group1 - * @{ - */ - -/* Initialization and de-initialization functions ******************************/ -void HAL_RCC_DeInit(void); -HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); -HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); - -/** - * @} - */ - -/** @addtogroup RCC_Exported_Functions_Group2 - * @{ - */ - -/* Peripheral Control functions ************************************************/ -void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); -void HAL_RCC_EnableCSS(void); -void HAL_RCC_DisableCSS(void); -uint32_t HAL_RCC_GetSysClockFreq(void); -uint32_t HAL_RCC_GetHCLKFreq(void); -uint32_t HAL_RCC_GetPCLK1Freq(void); -uint32_t HAL_RCC_GetPCLK2Freq(void); -void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); -void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); - -/* CSS NMI IRQ handler */ -void HAL_RCC_NMI_IRQHandler(void); - -/* User Callbacks in non blocking mode (IT mode) */ -void HAL_RCC_CSSCallback(void); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_RCC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h deleted file mode 100644 index 9871f4a..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h +++ /dev/null @@ -1,1926 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_rcc_ex.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of RCC HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_RCC_EX_H -#define __STM32F1xx_HAL_RCC_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup RCCEx - * @{ - */ - -/** @addtogroup RCCEx_Private_Constants - * @{ - */ - -#if defined(STM32F105xC) || defined(STM32F107xC) - -/* Alias word address of PLLI2SON bit */ -#define PLLI2SON_BITNUMBER POSITION_VAL(RCC_CR_PLL3ON) -#define RCC_CR_PLLI2SON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (PLLI2SON_BITNUMBER * 4))) -/* Alias word address of PLL2ON bit */ -#define PLL2ON_BITNUMBER POSITION_VAL(RCC_CR_PLL2ON) -#define RCC_CR_PLL2ON_BB ((uint32_t)(PERIPH_BB_BASE + (RCC_CR_OFFSET_BB * 32) + (PLL2ON_BITNUMBER * 4))) - -#define PLLI2S_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */ -#define PLL2_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */ - -#endif /* STM32F105xC || STM32F107xC */ - - -#define CR_REG_INDEX ((uint8_t)1) - -/** - * @} - */ - -/** @addtogroup RCCEx_Private_Macros - * @{ - */ - -#if defined(STM32F105xC) || defined(STM32F107xC) -#define IS_RCC_PREDIV1_SOURCE(__SOURCE__) (((__SOURCE__) == RCC_PREDIV1_SOURCE_HSE) || \ - ((__SOURCE__) == RCC_PREDIV1_SOURCE_PLL2)) -#endif /* STM32F105xC || STM32F107xC */ - -#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\ - || defined(STM32F100xE) -#define IS_RCC_HSE_PREDIV(__DIV__) (((__DIV__) == RCC_HSE_PREDIV_DIV1) || ((__DIV__) == RCC_HSE_PREDIV_DIV2) || \ - ((__DIV__) == RCC_HSE_PREDIV_DIV3) || ((__DIV__) == RCC_HSE_PREDIV_DIV4) || \ - ((__DIV__) == RCC_HSE_PREDIV_DIV5) || ((__DIV__) == RCC_HSE_PREDIV_DIV6) || \ - ((__DIV__) == RCC_HSE_PREDIV_DIV7) || ((__DIV__) == RCC_HSE_PREDIV_DIV8) || \ - ((__DIV__) == RCC_HSE_PREDIV_DIV9) || ((__DIV__) == RCC_HSE_PREDIV_DIV10) || \ - ((__DIV__) == RCC_HSE_PREDIV_DIV11) || ((__DIV__) == RCC_HSE_PREDIV_DIV12) || \ - ((__DIV__) == RCC_HSE_PREDIV_DIV13) || ((__DIV__) == RCC_HSE_PREDIV_DIV14) || \ - ((__DIV__) == RCC_HSE_PREDIV_DIV15) || ((__DIV__) == RCC_HSE_PREDIV_DIV16)) - -#else -#define IS_RCC_HSE_PREDIV(__DIV__) (((__DIV__) == RCC_HSE_PREDIV_DIV1) || ((__DIV__) == RCC_HSE_PREDIV_DIV2)) -#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */ - -#if defined(STM32F105xC) || defined(STM32F107xC) -#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \ - ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \ - ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \ - ((__MUL__) == RCC_PLL_MUL6_5)) - -#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || ((__SOURCE__) == RCC_MCO1SOURCE_HSI) \ - || ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) \ - || ((__SOURCE__) == RCC_MCO1SOURCE_PLL2CLK) || ((__SOURCE__) == RCC_MCO1SOURCE_PLL3CLK) \ - || ((__SOURCE__) == RCC_MCO1SOURCE_PLL3CLK_DIV2) || ((__SOURCE__) == RCC_MCO1SOURCE_EXT_HSE) \ - || ((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK)) - -#else -#define IS_RCC_PLL_MUL(__MUL__) (((__MUL__) == RCC_PLL_MUL2) || ((__MUL__) == RCC_PLL_MUL3) || \ - ((__MUL__) == RCC_PLL_MUL4) || ((__MUL__) == RCC_PLL_MUL5) || \ - ((__MUL__) == RCC_PLL_MUL6) || ((__MUL__) == RCC_PLL_MUL7) || \ - ((__MUL__) == RCC_PLL_MUL8) || ((__MUL__) == RCC_PLL_MUL9) || \ - ((__MUL__) == RCC_PLL_MUL10) || ((__MUL__) == RCC_PLL_MUL11) || \ - ((__MUL__) == RCC_PLL_MUL12) || ((__MUL__) == RCC_PLL_MUL13) || \ - ((__MUL__) == RCC_PLL_MUL14) || ((__MUL__) == RCC_PLL_MUL15) || \ - ((__MUL__) == RCC_PLL_MUL16)) - -#define IS_RCC_MCO1SOURCE(__SOURCE__) (((__SOURCE__) == RCC_MCO1SOURCE_SYSCLK) || ((__SOURCE__) == RCC_MCO1SOURCE_HSI) \ - || ((__SOURCE__) == RCC_MCO1SOURCE_HSE) || ((__SOURCE__) == RCC_MCO1SOURCE_PLLCLK) \ - || ((__SOURCE__) == RCC_MCO1SOURCE_NOCLOCK)) - -#endif /* STM32F105xC || STM32F107xC*/ - -#define IS_RCC_ADCPLLCLK_DIV(__ADCCLK__) (((__ADCCLK__) == RCC_ADCPCLK2_DIV2) || ((__ADCCLK__) == RCC_ADCPCLK2_DIV4) || \ - ((__ADCCLK__) == RCC_ADCPCLK2_DIV6) || ((__ADCCLK__) == RCC_ADCPCLK2_DIV8)) - -#if defined(STM32F105xC) || defined(STM32F107xC) -#define IS_RCC_I2S2CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2S2CLKSOURCE_SYSCLK) || ((__SOURCE__) == RCC_I2S2CLKSOURCE_PLLI2S_VCO)) - -#define IS_RCC_I2S3CLKSOURCE(__SOURCE__) (((__SOURCE__) == RCC_I2S3CLKSOURCE_SYSCLK) || ((__SOURCE__) == RCC_I2S3CLKSOURCE_PLLI2S_VCO)) - -#define IS_RCC_USBPLLCLK_DIV(__USBCLK__) (((__USBCLK__) == RCC_USBCLKSOURCE_PLL_DIV2) || ((__USBCLK__) == RCC_USBCLKSOURCE_PLL_DIV3)) - -#define IS_RCC_PLLI2S_MUL(__MUL__) (((__MUL__) == RCC_PLLI2S_MUL8) || ((__MUL__) == RCC_PLLI2S_MUL9) || \ - ((__MUL__) == RCC_PLLI2S_MUL10) || ((__MUL__) == RCC_PLLI2S_MUL11) || \ - ((__MUL__) == RCC_PLLI2S_MUL12) || ((__MUL__) == RCC_PLLI2S_MUL13) || \ - ((__MUL__) == RCC_PLLI2S_MUL14) || ((__MUL__) == RCC_PLLI2S_MUL16) || \ - ((__MUL__) == RCC_PLLI2S_MUL20)) - -#define IS_RCC_HSE_PREDIV2(__DIV__) (((__DIV__) == RCC_HSE_PREDIV2_DIV1) || ((__DIV__) == RCC_HSE_PREDIV2_DIV2) || \ - ((__DIV__) == RCC_HSE_PREDIV2_DIV3) || ((__DIV__) == RCC_HSE_PREDIV2_DIV4) || \ - ((__DIV__) == RCC_HSE_PREDIV2_DIV5) || ((__DIV__) == RCC_HSE_PREDIV2_DIV6) || \ - ((__DIV__) == RCC_HSE_PREDIV2_DIV7) || ((__DIV__) == RCC_HSE_PREDIV2_DIV8) || \ - ((__DIV__) == RCC_HSE_PREDIV2_DIV9) || ((__DIV__) == RCC_HSE_PREDIV2_DIV10) || \ - ((__DIV__) == RCC_HSE_PREDIV2_DIV11) || ((__DIV__) == RCC_HSE_PREDIV2_DIV12) || \ - ((__DIV__) == RCC_HSE_PREDIV2_DIV13) || ((__DIV__) == RCC_HSE_PREDIV2_DIV14) || \ - ((__DIV__) == RCC_HSE_PREDIV2_DIV15) || ((__DIV__) == RCC_HSE_PREDIV2_DIV16)) - -#define IS_RCC_PLL2(__PLL__) (((__PLL__) == RCC_PLL2_NONE) || ((__PLL__) == RCC_PLL2_OFF) || \ - ((__PLL__) == RCC_PLL2_ON)) - -#define IS_RCC_PLL2_MUL(__MUL__) (((__MUL__) == RCC_PLL2_MUL8) || ((__MUL__) == RCC_PLL2_MUL9) || \ - ((__MUL__) == RCC_PLL2_MUL10) || ((__MUL__) == RCC_PLL2_MUL11) || \ - ((__MUL__) == RCC_PLL2_MUL12) || ((__MUL__) == RCC_PLL2_MUL13) || \ - ((__MUL__) == RCC_PLL2_MUL14) || ((__MUL__) == RCC_PLL2_MUL16) || \ - ((__MUL__) == RCC_PLL2_MUL20)) - -#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ - ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ - (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ - (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \ - (((__SELECTION__) & RCC_PERIPHCLK_I2S3) == RCC_PERIPHCLK_I2S3) || \ - (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)) - -#elif defined(STM32F103xE) || defined(STM32F103xG) - -#define IS_RCC_I2S2CLKSOURCE(__SOURCE__) ((__SOURCE__) == RCC_I2S2CLKSOURCE_SYSCLK) - -#define IS_RCC_I2S3CLKSOURCE(__SOURCE__) ((__SOURCE__) == RCC_I2S3CLKSOURCE_SYSCLK) - -#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ - ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ - (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ - (((__SELECTION__) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) || \ - (((__SELECTION__) & RCC_PERIPHCLK_I2S3) == RCC_PERIPHCLK_I2S3) || \ - (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)) - - -#elif defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ - || defined(STM32F103xB) - -#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ - ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ - (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) || \ - (((__SELECTION__) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB)) - -#else - -#define IS_RCC_PERIPHCLOCK(__SELECTION__) \ - ((((__SELECTION__) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) || \ - (((__SELECTION__) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC)) - -#endif /* STM32F105xC || STM32F107xC */ - -#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ - || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) - -#define IS_RCC_USBPLLCLK_DIV(__USBCLK__) (((__USBCLK__) == RCC_USBCLKSOURCE_PLL) || ((__USBCLK__) == RCC_USBCLKSOURCE_PLL_DIV1_5)) - -#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ - -/** - * @} - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup RCCEx_Exported_Types RCCEx Exported Types - * @{ - */ - -#if defined(STM32F105xC) || defined(STM32F107xC) -/** - * @brief RCC PLL2 configuration structure definition - */ -typedef struct -{ - uint32_t PLL2State; /*!< The new state of the PLL2. - This parameter can be a value of @ref RCCEx_PLL2_Config */ - - uint32_t PLL2MUL; /*!< PLL2MUL: Multiplication factor for PLL2 VCO input clock - This parameter must be a value of @ref RCCEx_PLL2_Multiplication_Factor*/ - -#if defined(STM32F105xC) || defined(STM32F107xC) - uint32_t HSEPrediv2Value; /*!< The Prediv2 factor value. - This parameter can be a value of @ref RCCEx_Prediv2_Factor */ - -#endif /* STM32F105xC || STM32F107xC */ -} RCC_PLL2InitTypeDef; - -#endif /* STM32F105xC || STM32F107xC */ - -/** - * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition - */ -typedef struct -{ - uint32_t OscillatorType; /*!< The oscillators to be configured. - This parameter can be a value of @ref RCC_Oscillator_Type */ - -#if defined(STM32F105xC) || defined(STM32F107xC) - uint32_t Prediv1Source; /*!< The Prediv1 source value. - This parameter can be a value of @ref RCCEx_Prediv1_Source */ -#endif /* STM32F105xC || STM32F107xC */ - - uint32_t HSEState; /*!< The new state of the HSE. - This parameter can be a value of @ref RCC_HSE_Config */ - - uint32_t HSEPredivValue; /*!< The Prediv1 factor value (named PREDIV1 or PLLXTPRE in RM) - This parameter can be a value of @ref RCCEx_Prediv1_Factor */ - - uint32_t LSEState; /*!< The new state of the LSE. - This parameter can be a value of @ref RCC_LSE_Config */ - - uint32_t HSIState; /*!< The new state of the HSI. - This parameter can be a value of @ref RCC_HSI_Config */ - - uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT). - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */ - - uint32_t LSIState; /*!< The new state of the LSI. - This parameter can be a value of @ref RCC_LSI_Config */ - - RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */ - -#if defined(STM32F105xC) || defined(STM32F107xC) - RCC_PLL2InitTypeDef PLL2; /*!< PLL2 structure parameters */ -#endif /* STM32F105xC || STM32F107xC */ -} RCC_OscInitTypeDef; - -#if defined(STM32F105xC) || defined(STM32F107xC) -/** - * @brief RCC PLLI2S configuration structure definition - */ -typedef struct -{ - uint32_t PLLI2SMUL; /*!< PLLI2SMUL: Multiplication factor for PLLI2S VCO input clock - This parameter must be a value of @ref RCCEx_PLLI2S_Multiplication_Factor*/ - -#if defined(STM32F105xC) || defined(STM32F107xC) - uint32_t HSEPrediv2Value; /*!< The Prediv2 factor value. - This parameter can be a value of @ref RCCEx_Prediv2_Factor */ - -#endif /* STM32F105xC || STM32F107xC */ -} RCC_PLLI2SInitTypeDef; -#endif /* STM32F105xC || STM32F107xC */ - -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - uint32_t RTCClockSelection; /*!< specifies the RTC clock source. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - - uint32_t AdcClockSelection; /*!< ADC clock source - This parameter can be a value of @ref RCCEx_ADC_Prescaler */ - -#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ - || defined(STM32F107xC) - uint32_t I2s2ClockSelection; /*!< I2S2 clock source - This parameter can be a value of @ref RCCEx_I2S2_Clock_Source */ - - uint32_t I2s3ClockSelection; /*!< I2S3 clock source - This parameter can be a value of @ref RCCEx_I2S3_Clock_Source */ - -#if defined(STM32F105xC) || defined(STM32F107xC) - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters - This parameter will be used only when PLLI2S is selected as Clock Source I2S2 or I2S3 */ - -#endif /* STM32F105xC || STM32F107xC */ -#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ - -#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ - || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ - || defined(STM32F105xC) || defined(STM32F107xC) - uint32_t UsbClockSelection; /*!< USB clock source - This parameter can be a value of @ref RCCEx_USB_Prescaler */ - -#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ -} RCC_PeriphCLKInitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants - * @{ - */ - -/** @defgroup RCCEx_Periph_Clock_Selection Periph Clock Selection - * @{ - */ -#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000001) -#define RCC_PERIPHCLK_ADC ((uint32_t)0x00000002) -#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ - || defined(STM32F107xC) -#define RCC_PERIPHCLK_I2S2 ((uint32_t)0x00000004) -#define RCC_PERIPHCLK_I2S3 ((uint32_t)0x00000008) -#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ -#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ - || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ - || defined(STM32F105xC) || defined(STM32F107xC) -#define RCC_PERIPHCLK_USB ((uint32_t)0x00000010) -#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ - -/** - * @} - */ - -/** @defgroup RCCEx_ADC_Prescaler ADC Prescaler - * @{ - */ -#define RCC_ADCPCLK2_DIV2 RCC_CFGR_ADCPRE_DIV2 -#define RCC_ADCPCLK2_DIV4 RCC_CFGR_ADCPRE_DIV4 -#define RCC_ADCPCLK2_DIV6 RCC_CFGR_ADCPRE_DIV6 -#define RCC_ADCPCLK2_DIV8 RCC_CFGR_ADCPRE_DIV8 - -/** - * @} - */ - -#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ - || defined(STM32F107xC) -/** @defgroup RCCEx_I2S2_Clock_Source I2S2 Clock Source - * @{ - */ -#define RCC_I2S2CLKSOURCE_SYSCLK ((uint32_t)0x00000000) -#if defined(STM32F105xC) || defined(STM32F107xC) -#define RCC_I2S2CLKSOURCE_PLLI2S_VCO RCC_CFGR2_I2S2SRC -#endif /* STM32F105xC || STM32F107xC */ - -/** - * @} - */ - -/** @defgroup RCCEx_I2S3_Clock_Source I2S3 Clock Source - * @{ - */ -#define RCC_I2S3CLKSOURCE_SYSCLK ((uint32_t)0x00000000) -#if defined(STM32F105xC) || defined(STM32F107xC) -#define RCC_I2S3CLKSOURCE_PLLI2S_VCO RCC_CFGR2_I2S3SRC -#endif /* STM32F105xC || STM32F107xC */ - -/** - * @} - */ - -#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ - -#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ - || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) - -/** @defgroup RCCEx_USB_Prescaler USB Prescaler - * @{ - */ -#define RCC_USBCLKSOURCE_PLL RCC_CFGR_USBPRE -#define RCC_USBCLKSOURCE_PLL_DIV1_5 ((uint32_t)0x00000000) - -/** - * @} - */ - -#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ - - -#if defined(STM32F105xC) || defined(STM32F107xC) -/** @defgroup RCCEx_USB_Prescaler USB Prescaler - * @{ - */ -#define RCC_USBCLKSOURCE_PLL_DIV2 RCC_CFGR_OTGFSPRE -#define RCC_USBCLKSOURCE_PLL_DIV3 ((uint32_t)0x00000000) - -/** - * @} - */ - -/** @defgroup RCCEx_PLLI2S_Multiplication_Factor PLLI2S Multiplication Factor - * @{ - */ - -#define RCC_PLLI2S_MUL8 RCC_CFGR2_PLL3MUL8 /*!< PLLI2S input clock * 8 */ -#define RCC_PLLI2S_MUL9 RCC_CFGR2_PLL3MUL9 /*!< PLLI2S input clock * 9 */ -#define RCC_PLLI2S_MUL10 RCC_CFGR2_PLL3MUL10 /*!< PLLI2S input clock * 10 */ -#define RCC_PLLI2S_MUL11 RCC_CFGR2_PLL3MUL11 /*!< PLLI2S input clock * 11 */ -#define RCC_PLLI2S_MUL12 RCC_CFGR2_PLL3MUL12 /*!< PLLI2S input clock * 12 */ -#define RCC_PLLI2S_MUL13 RCC_CFGR2_PLL3MUL13 /*!< PLLI2S input clock * 13 */ -#define RCC_PLLI2S_MUL14 RCC_CFGR2_PLL3MUL14 /*!< PLLI2S input clock * 14 */ -#define RCC_PLLI2S_MUL16 RCC_CFGR2_PLL3MUL16 /*!< PLLI2S input clock * 16 */ -#define RCC_PLLI2S_MUL20 RCC_CFGR2_PLL3MUL20 /*!< PLLI2S input clock * 20 */ - -/** - * @} - */ -#endif /* STM32F105xC || STM32F107xC */ - -#if defined(STM32F105xC) || defined(STM32F107xC) -/** @defgroup RCCEx_Prediv1_Source Prediv1 Source - * @{ - */ - -#define RCC_PREDIV1_SOURCE_HSE RCC_CFGR2_PREDIV1SRC_HSE -#define RCC_PREDIV1_SOURCE_PLL2 RCC_CFGR2_PREDIV1SRC_PLL2 - -/** - * @} - */ -#endif /* STM32F105xC || STM32F107xC */ - -/** @defgroup RCCEx_Prediv1_Factor HSE Prediv1 Factor - * @{ - */ - -#define RCC_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) - -#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\ - || defined(STM32F100xE) -#define RCC_HSE_PREDIV_DIV2 RCC_CFGR2_PREDIV1_DIV2 -#define RCC_HSE_PREDIV_DIV3 RCC_CFGR2_PREDIV1_DIV3 -#define RCC_HSE_PREDIV_DIV4 RCC_CFGR2_PREDIV1_DIV4 -#define RCC_HSE_PREDIV_DIV5 RCC_CFGR2_PREDIV1_DIV5 -#define RCC_HSE_PREDIV_DIV6 RCC_CFGR2_PREDIV1_DIV6 -#define RCC_HSE_PREDIV_DIV7 RCC_CFGR2_PREDIV1_DIV7 -#define RCC_HSE_PREDIV_DIV8 RCC_CFGR2_PREDIV1_DIV8 -#define RCC_HSE_PREDIV_DIV9 RCC_CFGR2_PREDIV1_DIV9 -#define RCC_HSE_PREDIV_DIV10 RCC_CFGR2_PREDIV1_DIV10 -#define RCC_HSE_PREDIV_DIV11 RCC_CFGR2_PREDIV1_DIV11 -#define RCC_HSE_PREDIV_DIV12 RCC_CFGR2_PREDIV1_DIV12 -#define RCC_HSE_PREDIV_DIV13 RCC_CFGR2_PREDIV1_DIV13 -#define RCC_HSE_PREDIV_DIV14 RCC_CFGR2_PREDIV1_DIV14 -#define RCC_HSE_PREDIV_DIV15 RCC_CFGR2_PREDIV1_DIV15 -#define RCC_HSE_PREDIV_DIV16 RCC_CFGR2_PREDIV1_DIV16 -#else -#define RCC_HSE_PREDIV_DIV2 RCC_CFGR_PLLXTPRE -#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */ - -/** - * @} - */ - -#if defined(STM32F105xC) || defined(STM32F107xC) -/** @defgroup RCCEx_Prediv2_Factor HSE Prediv2 Factor - * @{ - */ - -#define RCC_HSE_PREDIV2_DIV1 RCC_CFGR2_PREDIV2_DIV1 /*!< PREDIV2 input clock not divided */ -#define RCC_HSE_PREDIV2_DIV2 RCC_CFGR2_PREDIV2_DIV2 /*!< PREDIV2 input clock divided by 2 */ -#define RCC_HSE_PREDIV2_DIV3 RCC_CFGR2_PREDIV2_DIV3 /*!< PREDIV2 input clock divided by 3 */ -#define RCC_HSE_PREDIV2_DIV4 RCC_CFGR2_PREDIV2_DIV4 /*!< PREDIV2 input clock divided by 4 */ -#define RCC_HSE_PREDIV2_DIV5 RCC_CFGR2_PREDIV2_DIV5 /*!< PREDIV2 input clock divided by 5 */ -#define RCC_HSE_PREDIV2_DIV6 RCC_CFGR2_PREDIV2_DIV6 /*!< PREDIV2 input clock divided by 6 */ -#define RCC_HSE_PREDIV2_DIV7 RCC_CFGR2_PREDIV2_DIV7 /*!< PREDIV2 input clock divided by 7 */ -#define RCC_HSE_PREDIV2_DIV8 RCC_CFGR2_PREDIV2_DIV8 /*!< PREDIV2 input clock divided by 8 */ -#define RCC_HSE_PREDIV2_DIV9 RCC_CFGR2_PREDIV2_DIV9 /*!< PREDIV2 input clock divided by 9 */ -#define RCC_HSE_PREDIV2_DIV10 RCC_CFGR2_PREDIV2_DIV10 /*!< PREDIV2 input clock divided by 10 */ -#define RCC_HSE_PREDIV2_DIV11 RCC_CFGR2_PREDIV2_DIV11 /*!< PREDIV2 input clock divided by 11 */ -#define RCC_HSE_PREDIV2_DIV12 RCC_CFGR2_PREDIV2_DIV12 /*!< PREDIV2 input clock divided by 12 */ -#define RCC_HSE_PREDIV2_DIV13 RCC_CFGR2_PREDIV2_DIV13 /*!< PREDIV2 input clock divided by 13 */ -#define RCC_HSE_PREDIV2_DIV14 RCC_CFGR2_PREDIV2_DIV14 /*!< PREDIV2 input clock divided by 14 */ -#define RCC_HSE_PREDIV2_DIV15 RCC_CFGR2_PREDIV2_DIV15 /*!< PREDIV2 input clock divided by 15 */ -#define RCC_HSE_PREDIV2_DIV16 RCC_CFGR2_PREDIV2_DIV16 /*!< PREDIV2 input clock divided by 16 */ - -/** - * @} - */ - -/** @defgroup RCCEx_PLL2_Config PLL Config - * @{ - */ -#define RCC_PLL2_NONE ((uint32_t)0x00000000) -#define RCC_PLL2_OFF ((uint32_t)0x00000001) -#define RCC_PLL2_ON ((uint32_t)0x00000002) - -/** - * @} - */ - -/** @defgroup RCCEx_PLL2_Multiplication_Factor PLL2 Multiplication Factor - * @{ - */ - -#define RCC_PLL2_MUL8 RCC_CFGR2_PLL2MUL8 /*!< PLL2 input clock * 8 */ -#define RCC_PLL2_MUL9 RCC_CFGR2_PLL2MUL9 /*!< PLL2 input clock * 9 */ -#define RCC_PLL2_MUL10 RCC_CFGR2_PLL2MUL10 /*!< PLL2 input clock * 10 */ -#define RCC_PLL2_MUL11 RCC_CFGR2_PLL2MUL11 /*!< PLL2 input clock * 11 */ -#define RCC_PLL2_MUL12 RCC_CFGR2_PLL2MUL12 /*!< PLL2 input clock * 12 */ -#define RCC_PLL2_MUL13 RCC_CFGR2_PLL2MUL13 /*!< PLL2 input clock * 13 */ -#define RCC_PLL2_MUL14 RCC_CFGR2_PLL2MUL14 /*!< PLL2 input clock * 14 */ -#define RCC_PLL2_MUL16 RCC_CFGR2_PLL2MUL16 /*!< PLL2 input clock * 16 */ -#define RCC_PLL2_MUL20 RCC_CFGR2_PLL2MUL20 /*!< PLL2 input clock * 20 */ - -/** - * @} - */ - -#endif /* STM32F105xC || STM32F107xC */ - -/** @defgroup RCCEx_PLL_Multiplication_Factor PLL Multiplication Factor - * @{ - */ - -#if defined(STM32F105xC) || defined(STM32F107xC) -#else -#define RCC_PLL_MUL2 RCC_CFGR_PLLMULL2 -#define RCC_PLL_MUL3 RCC_CFGR_PLLMULL3 -#endif /* STM32F105xC || STM32F107xC */ -#define RCC_PLL_MUL4 RCC_CFGR_PLLMULL4 -#define RCC_PLL_MUL5 RCC_CFGR_PLLMULL5 -#define RCC_PLL_MUL6 RCC_CFGR_PLLMULL6 -#define RCC_PLL_MUL7 RCC_CFGR_PLLMULL7 -#define RCC_PLL_MUL8 RCC_CFGR_PLLMULL8 -#define RCC_PLL_MUL9 RCC_CFGR_PLLMULL9 -#if defined(STM32F105xC) || defined(STM32F107xC) -#define RCC_PLL_MUL6_5 RCC_CFGR_PLLMULL6_5 -#else -#define RCC_PLL_MUL10 RCC_CFGR_PLLMULL10 -#define RCC_PLL_MUL11 RCC_CFGR_PLLMULL11 -#define RCC_PLL_MUL12 RCC_CFGR_PLLMULL12 -#define RCC_PLL_MUL13 RCC_CFGR_PLLMULL13 -#define RCC_PLL_MUL14 RCC_CFGR_PLLMULL14 -#define RCC_PLL_MUL15 RCC_CFGR_PLLMULL15 -#define RCC_PLL_MUL16 RCC_CFGR_PLLMULL16 -#endif /* STM32F105xC || STM32F107xC */ - -/** - * @} - */ - -/** @defgroup RCCEx_MCO1_Clock_Source MCO1 Clock Source - * @{ - */ -#define RCC_MCO1SOURCE_NOCLOCK ((uint32_t)RCC_CFGR_MCO_NOCLOCK) -#define RCC_MCO1SOURCE_SYSCLK ((uint32_t)RCC_CFGR_MCO_SYSCLK) -#define RCC_MCO1SOURCE_HSI ((uint32_t)RCC_CFGR_MCO_HSI) -#define RCC_MCO1SOURCE_HSE ((uint32_t)RCC_CFGR_MCO_HSE) -#define RCC_MCO1SOURCE_PLLCLK ((uint32_t)RCC_CFGR_MCO_PLLCLK_DIV2) -#if defined(STM32F105xC) || defined(STM32F107xC) -#define RCC_MCO1SOURCE_PLL2CLK ((uint32_t)RCC_CFGR_MCO_PLL2CLK) -#define RCC_MCO1SOURCE_PLL3CLK_DIV2 ((uint32_t)RCC_CFGR_MCO_PLL3CLK_DIV2) -#define RCC_MCO1SOURCE_EXT_HSE ((uint32_t)RCC_CFGR_MCO_EXT_HSE) -#define RCC_MCO1SOURCE_PLL3CLK ((uint32_t)RCC_CFGR_MCO_PLL3CLK) -#endif /* STM32F105xC || STM32F107xC*/ -/** - * @} - */ - -#if defined(STM32F105xC) || defined(STM32F107xC) -/** @defgroup RCCEx_Interrupt RCCEx Interrupt - * @{ - */ -#define RCC_IT_PLL2RDY ((uint8_t)RCC_CIR_PLL2RDYF) -#define RCC_IT_PLLI2SRDY ((uint8_t)RCC_CIR_PLL3RDYF) -/** - * @} - */ - -/** @defgroup RCCEx_Flag RCCEx Flag - * Elements values convention: 0XXYYYYYb - * - YYYYY : Flag position in the register - * - XX : Register index - * - 01: CR register - * @{ - */ -/* Flags in the CR register */ -#define RCC_FLAG_PLL2RDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_PLL2RDY))) -#define RCC_FLAG_PLLI2SRDY ((uint8_t)((CR_REG_INDEX << 5) | POSITION_VAL(RCC_CR_PLL3RDY))) -/** - * @} - */ -#endif /* STM32F105xC || STM32F107xC*/ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros - * @{ - */ - -/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable Peripheral Clock Enable Disable - * @brief Enable or disable the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ - || defined(STM32F103xG) || defined(STM32F105xC) || defined (STM32F107xC)\ - || defined (STM32F100xE) -#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_DMA2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN)) -#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F105xC || STM32F107xC || STM32F100xE */ - -#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ - || defined(STM32F103xG) || defined (STM32F100xE) -#define __HAL_RCC_FSMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FSMCEN)) -#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F100xE */ - -#if defined(STM32F103xE) || defined(STM32F103xG) -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0) - - -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SDIOEN)) -#endif /* STM32F103xE || STM32F103xG */ - -#if defined(STM32F105xC) || defined(STM32F107xC) -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_OTGFSEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_OTGFSEN);\ - UNUSED(tmpreg); \ - } while(0) - - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_OTGFSEN)) -#endif /* STM32F105xC || STM32F107xC*/ - -#if defined(STM32F107xC) -#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACTXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACTXEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACRXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_ETHMACRXEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ETHMACEN)) -#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ETHMACTXEN)) -#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ETHMACRXEN)) - -/** - * @brief Enable ETHERNET clock. - */ -#define __HAL_RCC_ETH_CLK_ENABLE() do { \ - __HAL_RCC_ETHMAC_CLK_ENABLE(); \ - __HAL_RCC_ETHMACTX_CLK_ENABLE(); \ - __HAL_RCC_ETHMACRX_CLK_ENABLE(); \ - } while(0) -/** - * @brief Disable ETHERNET clock. - */ -#define __HAL_RCC_ETH_CLK_DISABLE() do { \ - __HAL_RCC_ETHMACTX_CLK_DISABLE(); \ - __HAL_RCC_ETHMACRX_CLK_DISABLE(); \ - __HAL_RCC_ETHMAC_CLK_DISABLE(); \ - } while(0) - -#endif /* STM32F107xC*/ - -/** - * @} - */ - -/** @defgroup RCCEx_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ - || defined(STM32F103xG) || defined(STM32F105xC) || defined (STM32F107xC)\ - || defined (STM32F100xE) -#define __HAL_RCC_DMA2_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) != RESET) -#define __HAL_RCC_DMA2_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_DMA2EN)) == RESET) -#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F105xC || STM32F107xC || STM32F100xE */ -#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ - || defined(STM32F103xG) || defined (STM32F100xE) -#define __HAL_RCC_FSMC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_FSMCEN)) != RESET) -#define __HAL_RCC_FSMC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_FSMCEN)) == RESET) -#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F100xE */ -#if defined(STM32F103xE) || defined(STM32F103xG) -#define __HAL_RCC_SDIO_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_SDIOEN)) != RESET) -#define __HAL_RCC_SDIO_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_SDIOEN)) == RESET) -#endif /* STM32F103xE || STM32F103xG */ -#if defined(STM32F105xC) || defined(STM32F107xC) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_OTGFSEN)) != RESET) -#define __HAL_RCC_USB_OTG_FS_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_OTGFSEN)) == RESET) -#endif /* STM32F105xC || STM32F107xC*/ -#if defined(STM32F107xC) -#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACEN)) != RESET) -#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACEN)) == RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACTXEN)) != RESET) -#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACTXEN)) == RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACRXEN)) != RESET) -#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED() ((RCC->AHBENR & (RCC_AHBENR_ETHMACRXEN)) == RESET) -#endif /* STM32F107xC*/ - -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Clock_Enable_Disable APB1 Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE)\ - || defined(STM32F103xG) || defined(STM32F105xC) ||defined(STM32F107xC) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ - -#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB)\ - || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F102xB)\ - || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ - || defined(STM32F105xC) || defined(STM32F107xC) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN)) -#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ - -#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ - || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) -#define __HAL_RCC_USB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USBEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN)) -#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ - -#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ - || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) -#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN)) -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -#endif /* STM32F101xE || STM32F103xE || STM32F101xG || (...) || STM32F105xC || STM32F107xC */ - -#if defined(STM32F100xB) || defined (STM32F100xE) -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_CEC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN)) -#endif /* STM32F100xB || STM32F100xE */ - -#ifdef STM32F100xE -#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#endif /* STM32F100xE */ - -#if defined(STM32F105xC) || defined(STM32F107xC) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#endif /* STM32F105xC || STM32F107xC */ - -#if defined(STM32F101xG) || defined(STM32F103xG) -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#endif /* STM32F101xG || STM32F103xG*/ - -/** - * @} - */ - -/** @defgroup RCCEx_APB1_Peripheral_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE)\ - || defined(STM32F103xG) || defined(STM32F105xC) ||defined(STM32F107xC) -#define __HAL_RCC_CAN1_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET) -#define __HAL_RCC_CAN1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET) -#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ -#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB)\ - || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F102xB)\ - || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ - || defined(STM32F105xC) || defined(STM32F107xC) -#define __HAL_RCC_TIM4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET) -#define __HAL_RCC_TIM4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET) -#define __HAL_RCC_SPI2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET) -#define __HAL_RCC_SPI2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET) -#define __HAL_RCC_USART3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET) -#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET) -#define __HAL_RCC_I2C2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET) -#define __HAL_RCC_I2C2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET) -#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ -#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ - || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) -#define __HAL_RCC_USB_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) != RESET) -#define __HAL_RCC_USB_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USBEN)) == RESET) -#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ -#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ - || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) -#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET) -#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET) -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) -#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) -#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) -#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) -#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) -#endif /* STM32F101xE || STM32F103xE || STM32F101xG || (...) || STM32F105xC || STM32F107xC */ -#if defined(STM32F100xB) || defined (STM32F100xE) -#define __HAL_RCC_TIM6_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET) -#define __HAL_RCC_TIM6_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET) -#define __HAL_RCC_TIM7_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET) -#define __HAL_RCC_TIM7_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET) -#define __HAL_RCC_DAC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET) -#define __HAL_RCC_DAC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET) -#define __HAL_RCC_CEC_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET) -#define __HAL_RCC_CEC_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET) -#endif /* STM32F100xB || STM32F100xE */ -#ifdef STM32F100xE -#define __HAL_RCC_TIM5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET) -#define __HAL_RCC_TIM5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET) -#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) -#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) -#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) -#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) -#define __HAL_RCC_SPI3_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET) -#define __HAL_RCC_SPI3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET) -#define __HAL_RCC_UART4_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET) -#define __HAL_RCC_UART4_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET) -#define __HAL_RCC_UART5_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET) -#define __HAL_RCC_UART5_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET) -#define __HAL_RCC_CAN2_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET) -#define __HAL_RCC_CAN2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET) -#endif /* STM32F100xE */ -#if defined(STM32F105xC) || defined(STM32F107xC) -#define __HAL_RCC_TIM12_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET) -#define __HAL_RCC_TIM12_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET) -#endif /* STM32F105xC || STM32F107xC */ -#if defined(STM32F101xG) || defined(STM32F103xG) -#define __HAL_RCC_TIM13_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET) -#define __HAL_RCC_TIM13_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET) -#define __HAL_RCC_TIM14_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET) -#define __HAL_RCC_TIM14_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET) -#endif /* STM32F101xG || STM32F103xG*/ - -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Clock_Enable_Disable APB2 Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB)\ - || defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F103xE)\ - || defined(STM32F103xG) -#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) -#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */ - -#if defined(STM32F100xB) || defined(STM32F100xE) -#define __HAL_RCC_TIM15_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM15EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM16_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM16EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM17_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM17EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN)) -#define __HAL_RCC_TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN)) -#define __HAL_RCC_TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN)) -#endif /* STM32F100xB || STM32F100xE */ - -#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE)\ - || defined(STM32F101xG) || defined(STM32F100xB) || defined(STM32F103xB)\ - || defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ - || defined(STM32F107xC) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPEEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPEEN)) -#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ - -#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ - || defined(STM32F103xG) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPGEN)) -#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/ - -#if defined(STM32F103xE) || defined(STM32F103xG) -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) -#endif /* STM32F103xE || STM32F103xG */ - -#if defined(STM32F100xE) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPFEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPGEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_IOPGEN)) -#endif /* STM32F100xE */ - -#if defined(STM32F101xG) || defined(STM32F103xG) -#define __HAL_RCC_TIM9_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM11_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN)) -#endif /* STM32F101xG || STM32F103xG */ - -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Peripheral_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status - * @brief Get the enable or disable status of the APB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ - -#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB)\ - || defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F103xE)\ - || defined(STM32F103xG) -#define __HAL_RCC_ADC2_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET) -#define __HAL_RCC_ADC2_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET) -#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */ -#if defined(STM32F100xB) || defined(STM32F100xE) -#define __HAL_RCC_TIM15_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) != RESET) -#define __HAL_RCC_TIM15_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM15EN)) == RESET) -#define __HAL_RCC_TIM16_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) != RESET) -#define __HAL_RCC_TIM16_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM16EN)) == RESET) -#define __HAL_RCC_TIM17_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) != RESET) -#define __HAL_RCC_TIM17_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM17EN)) == RESET) -#endif /* STM32F100xB || STM32F100xE */ -#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE)\ - || defined(STM32F101xG) || defined(STM32F100xB) || defined(STM32F103xB)\ - || defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ - || defined(STM32F107xC) -#define __HAL_RCC_GPIOE_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPEEN)) != RESET) -#define __HAL_RCC_GPIOE_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPEEN)) == RESET) -#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ -#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ - || defined(STM32F103xG) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) != RESET) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) == RESET) -#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) != RESET) -#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) == RESET) -#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/ -#if defined(STM32F103xE) || defined(STM32F103xG) -#define __HAL_RCC_TIM8_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET) -#define __HAL_RCC_TIM8_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET) -#define __HAL_RCC_ADC3_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET) -#define __HAL_RCC_ADC3_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET) -#endif /* STM32F103xE || STM32F103xG */ -#if defined(STM32F100xE) -#define __HAL_RCC_GPIOF_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) != RESET) -#define __HAL_RCC_GPIOF_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPFEN)) == RESET) -#define __HAL_RCC_GPIOG_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) != RESET) -#define __HAL_RCC_GPIOG_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_IOPGEN)) == RESET) -#endif /* STM32F100xE */ -#if defined(STM32F101xG) || defined(STM32F103xG) -#define __HAL_RCC_TIM9_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET) -#define __HAL_RCC_TIM9_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET) -#define __HAL_RCC_TIM10_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET) -#define __HAL_RCC_TIM10_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET) -#define __HAL_RCC_TIM11_IS_CLK_ENABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET) -#define __HAL_RCC_TIM11_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET) -#endif /* STM32F101xG || STM32F103xG */ - -/** - * @} - */ - -#if defined(STM32F105xC) || defined(STM32F107xC) -/** @defgroup RCCEx_Peripheral_Clock_Force_Release Peripheral Clock Force Release - * @brief Force or release AHB peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFFU) -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_OTGFSRST)) -#if defined(STM32F107xC) -#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ETHMACRST)) -#endif /* STM32F107xC */ - -#define __HAL_RCC_AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_OTGFSRST)) -#if defined(STM32F107xC) -#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ETHMACRST)) -#endif /* STM32F107xC */ - -/** - * @} - */ -#endif /* STM32F105xC || STM32F107xC */ - -/** @defgroup RCCEx_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ - -#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE)\ - || defined(STM32F103xG) || defined(STM32F105xC) ||defined(STM32F107xC) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) - -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#endif /* STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ - -#if defined(STM32F100xB) || defined(STM32F100xE) || defined(STM32F101xB)\ - || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F102xB)\ - || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ - || defined(STM32F105xC) || defined(STM32F107xC) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST)) - -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST)) -#endif /* STM32F100xB || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ - -#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ - || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) -#define __HAL_RCC_USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST)) -#define __HAL_RCC_USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST)) -#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ - -#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ - || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC) -#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST)) -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) - -#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST)) -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -#endif /* STM32F101xE || STM32F103xE || STM32F101xG || (...) || STM32F105xC || STM32F107xC */ - -#if defined(STM32F100xB) || defined (STM32F100xE) -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST)) - -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST)) -#endif /* STM32F100xB || STM32F100xE */ - -#if defined (STM32F100xE) -#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) - -#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#endif /* STM32F100xE */ - -#if defined(STM32F105xC) || defined(STM32F107xC) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) - -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#endif /* STM32F105xC || STM32F107xC */ - -#if defined(STM32F101xG) || defined(STM32F103xG) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) - -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#endif /* STM32F101xG || STM32F103xG */ - -/** - * @} - */ - -/** @defgroup RCCEx_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ - -#if defined(STM32F101xG) || defined(STM32F103x6) || defined(STM32F103xB)\ - || defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F103xE)\ - || defined(STM32F103xG) -#define __HAL_RCC_ADC2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC2RST)) - -#define __HAL_RCC_ADC2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC2RST)) -#endif /* STM32F101xG || STM32F103x6 || STM32F103xB || STM32F105xC || STM32F107xC || STM32F103xE || STM32F103xG */ - -#if defined(STM32F100xB) || defined(STM32F100xE) -#define __HAL_RCC_TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST)) -#define __HAL_RCC_TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST)) -#define __HAL_RCC_TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST)) - -#define __HAL_RCC_TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST)) -#define __HAL_RCC_TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST)) -#define __HAL_RCC_TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST)) -#endif /* STM32F100xB || STM32F100xE */ - -#if defined(STM32F100xE) || defined(STM32F101xB) || defined(STM32F101xE)\ - || defined(STM32F101xG) || defined(STM32F100xB) || defined(STM32F103xB)\ - || defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ - || defined(STM32F107xC) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPERST)) - -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPERST)) -#endif /* STM32F101x6 || STM32F101xB || STM32F101xE || (...) || STM32F105xC || STM32F107xC */ - -#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG)\ - || defined(STM32F103xG) -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPGRST)) - -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPGRST)) -#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG*/ - -#if defined(STM32F103xE) || defined(STM32F103xG) -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_ADC3_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC3RST)) - -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_ADC3_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC3RST)) -#endif /* STM32F103xE || STM32F103xG */ - -#if defined(STM32F100xE) -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_IOPGRST)) - -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_IOPGRST)) -#endif /* STM32F100xE */ - -#if defined(STM32F101xG) || defined(STM32F103xG) -#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST)) - -#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST)) -#endif /* STM32F101xG || STM32F103xG*/ - -/** - * @} - */ - -/** @defgroup RCCEx_HSE_Configuration HSE Configuration - * @{ - */ - -#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\ - || defined(STM32F100xE) -/** - * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL. - * @note Predivision factor can not be changed if PLL is used as system clock - * In this case, you have to select another source of the system clock, disable the PLL and - * then change the HSE predivision factor. - * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE. - * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16. - */ -#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV1, (uint32_t)(__HSE_PREDIV_VALUE__)) -#else -/** - * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL. - * @note Predivision factor can not be changed if PLL is used as system clock - * In this case, you have to select another source of the system clock, disable the PLL and - * then change the HSE predivision factor. - * @param __HSE_PREDIV_VALUE__ specifies the division value applied to HSE. - * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV2. - */ -#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSE_PREDIV_VALUE__) \ - MODIFY_REG(RCC->CFGR,RCC_CFGR_PLLXTPRE, (uint32_t)(__HSE_PREDIV_VALUE__)) - -#endif /* STM32F105xC || STM32F107xC */ - -#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\ - || defined(STM32F100xE) -/** - * @brief Macro to get prediv1 factor for PLL. - */ -#define __HAL_RCC_HSE_GET_PREDIV() READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1) - -#else -/** - * @brief Macro to get prediv1 factor for PLL. - */ -#define __HAL_RCC_HSE_GET_PREDIV() READ_BIT(RCC->CFGR, RCC_CFGR_PLLXTPRE) - -#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */ - -/** - * @} - */ - -#if defined(STM32F105xC) || defined(STM32F107xC) -/** @defgroup RCCEx_PLLI2S_Configuration PLLI2S Configuration - * @{ - */ - -/** @brief Macros to enable the main PLLI2S. - * @note After enabling the main PLLI2S, the application software should wait on - * PLLI2SRDY flag to be set indicating that PLLI2S clock is stable and can - * be used as system clock source. - * @note The main PLLI2S is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = ENABLE) - -/** @brief Macros to disable the main PLLI2S. - * @note The main PLLI2S is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = DISABLE) - -/** @brief macros to configure the main PLLI2S multiplication factor. - * @note This function must be used only when the main PLLI2S is disabled. - * - * @param __PLLI2SMUL__ specifies the multiplication factor for PLLI2S VCO output clock - * This parameter can be one of the following values: - * @arg @ref RCC_PLLI2S_MUL8 PLLI2SVCO = PLLI2S clock entry x 8 - * @arg @ref RCC_PLLI2S_MUL9 PLLI2SVCO = PLLI2S clock entry x 9 - * @arg @ref RCC_PLLI2S_MUL10 PLLI2SVCO = PLLI2S clock entry x 10 - * @arg @ref RCC_PLLI2S_MUL11 PLLI2SVCO = PLLI2S clock entry x 11 - * @arg @ref RCC_PLLI2S_MUL12 PLLI2SVCO = PLLI2S clock entry x 12 - * @arg @ref RCC_PLLI2S_MUL13 PLLI2SVCO = PLLI2S clock entry x 13 - * @arg @ref RCC_PLLI2S_MUL14 PLLI2SVCO = PLLI2S clock entry x 14 - * @arg @ref RCC_PLLI2S_MUL16 PLLI2SVCO = PLLI2S clock entry x 16 - * @arg @ref RCC_PLLI2S_MUL20 PLLI2SVCO = PLLI2S clock entry x 20 - * - */ -#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SMUL__)\ - MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PLL3MUL,(__PLLI2SMUL__)) - -/** - * @} - */ - -#endif /* STM32F105xC || STM32F107xC */ - -/** @defgroup RCCEx_Peripheral_Configuration Peripheral Configuration - * @brief Macros to configure clock source of different peripherals. - * @{ - */ - -#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ - || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) -/** @brief Macro to configure the USB clock. - * @param __USBCLKSOURCE__ specifies the USB clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_USBCLKSOURCE_PLL PLL clock divided by 1 selected as USB clock - * @arg @ref RCC_USBCLKSOURCE_PLL_DIV1_5 PLL clock divided by 1.5 selected as USB clock - */ -#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \ - MODIFY_REG(RCC->CFGR, RCC_CFGR_USBPRE, (uint32_t)(__USBCLKSOURCE__)) - -/** @brief Macro to get the USB clock (USBCLK). - * @retval The clock source can be one of the following values: - * @arg @ref RCC_USBCLKSOURCE_PLL PLL clock divided by 1 selected as USB clock - * @arg @ref RCC_USBCLKSOURCE_PLL_DIV1_5 PLL clock divided by 1.5 selected as USB clock - */ -#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_USBPRE))) - -#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG */ - -#if defined(STM32F105xC) || defined(STM32F107xC) - -/** @brief Macro to configure the USB OTSclock. - * @param __USBCLKSOURCE__ specifies the USB clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_USBCLKSOURCE_PLL_DIV2 PLL clock divided by 2 selected as USB OTG FS clock - * @arg @ref RCC_USBCLKSOURCE_PLL_DIV3 PLL clock divided by 3 selected as USB OTG FS clock - */ -#define __HAL_RCC_USB_CONFIG(__USBCLKSOURCE__) \ - MODIFY_REG(RCC->CFGR, RCC_CFGR_OTGFSPRE, (uint32_t)(__USBCLKSOURCE__)) - -/** @brief Macro to get the USB clock (USBCLK). - * @retval The clock source can be one of the following values: - * @arg @ref RCC_USBCLKSOURCE_PLL_DIV2 PLL clock divided by 2 selected as USB OTG FS clock - * @arg @ref RCC_USBCLKSOURCE_PLL_DIV3 PLL clock divided by 3 selected as USB OTG FS clock - */ -#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_OTGFSPRE))) - -#endif /* STM32F105xC || STM32F107xC */ - -/** @brief Macro to configure the ADCx clock (x=1 to 3 depending on devices). - * @param __ADCCLKSOURCE__ specifies the ADC clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_ADCPCLK2_DIV2 PCLK2 clock divided by 2 selected as ADC clock - * @arg @ref RCC_ADCPCLK2_DIV4 PCLK2 clock divided by 4 selected as ADC clock - * @arg @ref RCC_ADCPCLK2_DIV6 PCLK2 clock divided by 6 selected as ADC clock - * @arg @ref RCC_ADCPCLK2_DIV8 PCLK2 clock divided by 8 selected as ADC clock - */ -#define __HAL_RCC_ADC_CONFIG(__ADCCLKSOURCE__) \ - MODIFY_REG(RCC->CFGR, RCC_CFGR_ADCPRE, (uint32_t)(__ADCCLKSOURCE__)) - -/** @brief Macro to get the ADC clock (ADCxCLK, x=1 to 3 depending on devices). - * @retval The clock source can be one of the following values: - * @arg @ref RCC_ADCPCLK2_DIV2 PCLK2 clock divided by 2 selected as ADC clock - * @arg @ref RCC_ADCPCLK2_DIV4 PCLK2 clock divided by 4 selected as ADC clock - * @arg @ref RCC_ADCPCLK2_DIV6 PCLK2 clock divided by 6 selected as ADC clock - * @arg @ref RCC_ADCPCLK2_DIV8 PCLK2 clock divided by 8 selected as ADC clock - */ -#define __HAL_RCC_GET_ADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_ADCPRE))) - -/** - * @} - */ - -#if defined(STM32F105xC) || defined(STM32F107xC) - -/** @addtogroup RCCEx_HSE_Configuration - * @{ - */ - -/** - * @brief Macro to configure the PLL2 & PLLI2S Predivision factor. - * @note Predivision factor can not be changed if PLL2 is used indirectly as system clock - * In this case, you have to select another source of the system clock, disable the PLL2 and PLLI2S and - * then change the PREDIV2 factor. - * @param __HSE_PREDIV2_VALUE__ specifies the PREDIV2 value applied to PLL2 & PLLI2S. - * This parameter must be a number between RCC_HSE_PREDIV2_DIV1 and RCC_HSE_PREDIV2_DIV16. - */ -#define __HAL_RCC_HSE_PREDIV2_CONFIG(__HSE_PREDIV2_VALUE__) \ - MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV2, (uint32_t)(__HSE_PREDIV2_VALUE__)) - -/** - * @brief Macro to get prediv2 factor for PLL2 & PLL3. - */ -#define __HAL_RCC_HSE_GET_PREDIV2() READ_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV2) - -/** - * @} - */ - -/** @addtogroup RCCEx_PLLI2S_Configuration - * @{ - */ - -/** @brief Macros to enable the main PLL2. - * @note After enabling the main PLL2, the application software should wait on - * PLL2RDY flag to be set indicating that PLL2 clock is stable and can - * be used as system clock source. - * @note The main PLL2 is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLL2_ENABLE() (*(__IO uint32_t *) RCC_CR_PLL2ON_BB = ENABLE) - -/** @brief Macros to disable the main PLL2. - * @note The main PLL2 can not be disabled if it is used indirectly as system clock source - * @note The main PLL2 is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLL2_DISABLE() (*(__IO uint32_t *) RCC_CR_PLL2ON_BB = DISABLE) - -/** @brief macros to configure the main PLL2 multiplication factor. - * @note This function must be used only when the main PLL2 is disabled. - * - * @param __PLL2MUL__ specifies the multiplication factor for PLL2 VCO output clock - * This parameter can be one of the following values: - * @arg @ref RCC_PLL2_MUL8 PLL2VCO = PLL2 clock entry x 8 - * @arg @ref RCC_PLL2_MUL9 PLL2VCO = PLL2 clock entry x 9 - * @arg @ref RCC_PLL2_MUL10 PLL2VCO = PLL2 clock entry x 10 - * @arg @ref RCC_PLL2_MUL11 PLL2VCO = PLL2 clock entry x 11 - * @arg @ref RCC_PLL2_MUL12 PLL2VCO = PLL2 clock entry x 12 - * @arg @ref RCC_PLL2_MUL13 PLL2VCO = PLL2 clock entry x 13 - * @arg @ref RCC_PLL2_MUL14 PLL2VCO = PLL2 clock entry x 14 - * @arg @ref RCC_PLL2_MUL16 PLL2VCO = PLL2 clock entry x 16 - * @arg @ref RCC_PLL2_MUL20 PLL2VCO = PLL2 clock entry x 20 - * - */ -#define __HAL_RCC_PLL2_CONFIG(__PLL2MUL__)\ - MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PLL2MUL,(__PLL2MUL__)) - -/** - * @} - */ - -/** @defgroup RCCEx_I2S_Configuration I2S Configuration - * @brief Macros to configure clock source of I2S peripherals. - * @{ - */ - -/** @brief Macro to configure the I2S2 clock. - * @param __I2S2CLKSOURCE__ specifies the I2S2 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_I2S2CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry - * @arg @ref RCC_I2S2CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry - */ -#define __HAL_RCC_I2S2_CONFIG(__I2S2CLKSOURCE__) \ - MODIFY_REG(RCC->CFGR2, RCC_CFGR2_I2S2SRC, (uint32_t)(__I2S2CLKSOURCE__)) - -/** @brief Macro to get the I2S2 clock (I2S2CLK). - * @retval The clock source can be one of the following values: - * @arg @ref RCC_I2S2CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry - * @arg @ref RCC_I2S2CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry - */ -#define __HAL_RCC_GET_I2S2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_I2S2SRC))) - -/** @brief Macro to configure the I2S3 clock. - * @param __I2S2CLKSOURCE__ specifies the I2S3 clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_I2S3CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry - * @arg @ref RCC_I2S3CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry - */ -#define __HAL_RCC_I2S3_CONFIG(__I2S2CLKSOURCE__) \ - MODIFY_REG(RCC->CFGR2, RCC_CFGR2_I2S3SRC, (uint32_t)(__I2S2CLKSOURCE__)) - -/** @brief Macro to get the I2S3 clock (I2S3CLK). - * @retval The clock source can be one of the following values: - * @arg @ref RCC_I2S3CLKSOURCE_SYSCLK system clock selected as I2S3 clock entry - * @arg @ref RCC_I2S3CLKSOURCE_PLLI2S_VCO PLLI2S VCO clock selected as I2S3 clock entry - */ -#define __HAL_RCC_GET_I2S3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_I2S3SRC))) - -/** - * @} - */ - -#endif /* STM32F105xC || STM32F107xC */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup RCCEx_Exported_Functions - * @{ - */ - -/** @addtogroup RCCEx_Exported_Functions_Group1 - * @{ - */ - -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); - -/** - * @} - */ - -#if defined(STM32F105xC) || defined(STM32F107xC) -/** @addtogroup RCCEx_Exported_Functions_Group2 - * @{ - */ -HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit); -HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void); - -/** - * @} - */ - -/** @addtogroup RCCEx_Exported_Functions_Group3 - * @{ - */ -HAL_StatusTypeDef HAL_RCCEx_EnablePLL2(RCC_PLL2InitTypeDef *PLL2Init); -HAL_StatusTypeDef HAL_RCCEx_DisablePLL2(void); - -/** - * @} - */ -#endif /* STM32F105xC || STM32F107xC */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_RCC_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h deleted file mode 100644 index 7e1c530..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h +++ /dev/null @@ -1,1767 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_tim.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of TIM HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_TIM_H -#define __STM32F1xx_HAL_TIM_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup TIM - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup TIM_Exported_Types TIM Exported Types - * @{ - */ -/** - * @brief TIM Time base Configuration Structure definition - */ -typedef struct -{ - uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t CounterMode; /*!< Specifies the counter mode. - This parameter can be a value of @ref TIM_Counter_Mode */ - - uint32_t Period; /*!< Specifies the period value to be loaded into the active - Auto-Reload Register at the next update event. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ - - uint32_t ClockDivision; /*!< Specifies the clock division. - This parameter can be a value of @ref TIM_ClockDivision */ - - uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter - reaches zero, an update event is generated and counting restarts - from the RCR value (N). - This means in PWM mode that (N+1) corresponds to: - - the number of PWM periods in edge-aligned mode - - the number of half PWM period in center-aligned mode - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. - @note This parameter is valid only for TIM1 and TIM8. */ -} TIM_Base_InitTypeDef; - -/** - * @brief TIM Output Compare Configuration Structure definition - */ -typedef struct -{ - uint32_t OCMode; /*!< Specifies the TIM mode. - This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ - - uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t OCPolarity; /*!< Specifies the output polarity. - This parameter can be a value of @ref TIM_Output_Compare_Polarity */ - - uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. - This parameter can be a value of @ref TIM_Output_Compare_N_Polarity - @note This parameter is valid only for TIM1 and TIM8. */ - - uint32_t OCFastMode; /*!< Specifies the Fast mode state. - This parameter can be a value of @ref TIM_Output_Fast_State - @note This parameter is valid only in PWM1 and PWM2 mode. */ - - - uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_Idle_State - @note This parameter is valid only for TIM1 and TIM8. */ - - uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State - @note This parameter is valid only for TIM1 and TIM8. */ -} TIM_OC_InitTypeDef; - -/** - * @brief TIM One Pulse Mode Configuration Structure definition - */ -typedef struct -{ - uint32_t OCMode; /*!< Specifies the TIM mode. - This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ - - uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t OCPolarity; /*!< Specifies the output polarity. - This parameter can be a value of @ref TIM_Output_Compare_Polarity */ - - uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. - This parameter can be a value of @ref TIM_Output_Compare_N_Polarity - @note This parameter is valid only for TIM1 and TIM8. */ - - uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_Idle_State - @note This parameter is valid only for TIM1 and TIM8. */ - - uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State - @note This parameter is valid only for TIM1 and TIM8. */ - - uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t ICSelection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t ICFilter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_OnePulse_InitTypeDef; - - -/** - * @brief TIM Input Capture Configuration Structure definition - */ -typedef struct -{ - uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t ICSelection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t ICFilter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_IC_InitTypeDef; - -/** - * @brief TIM Encoder Configuration Structure definition - */ -typedef struct -{ - uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Encoder_Mode */ - - uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t IC1Selection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC1Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - - uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t IC2Selection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC2Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_Encoder_InitTypeDef; - - -/** - * @brief TIM Clock Configuration Handle Structure definition - */ -typedef struct -{ - uint32_t ClockSource; /*!< TIM clock sources - This parameter can be a value of @ref TIM_Clock_Source */ - uint32_t ClockPolarity; /*!< TIM clock polarity - This parameter can be a value of @ref TIM_Clock_Polarity */ - uint32_t ClockPrescaler; /*!< TIM clock prescaler - This parameter can be a value of @ref TIM_Clock_Prescaler */ - uint32_t ClockFilter; /*!< TIM clock filter - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -}TIM_ClockConfigTypeDef; - -/** - * @brief TIM Clear Input Configuration Handle Structure definition - */ -typedef struct -{ - uint32_t ClearInputState; /*!< TIM clear Input state - This parameter can be ENABLE or DISABLE */ - uint32_t ClearInputSource; /*!< TIM clear Input sources - This parameter can be a value of @ref TIM_ClearInput_Source */ - uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity - This parameter can be a value of @ref TIM_ClearInput_Polarity */ - uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler - This parameter can be a value of @ref TIM_ClearInput_Prescaler */ - uint32_t ClearInputFilter; /*!< TIM Clear Input filter - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -}TIM_ClearInputConfigTypeDef; - -/** - * @brief TIM Slave configuration Structure definition - */ -typedef struct { - uint32_t SlaveMode; /*!< Slave mode selection - This parameter can be a value of @ref TIM_Slave_Mode */ - uint32_t InputTrigger; /*!< Input Trigger source - This parameter can be a value of @ref TIM_Trigger_Selection */ - uint32_t TriggerPolarity; /*!< Input Trigger polarity - This parameter can be a value of @ref TIM_Trigger_Polarity */ - uint32_t TriggerPrescaler; /*!< Input trigger prescaler - This parameter can be a value of @ref TIM_Trigger_Prescaler */ - uint32_t TriggerFilter; /*!< Input trigger filter - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - -}TIM_SlaveConfigTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_TIM_STATE_RESET = 0x00, /*!< Peripheral not yet initialized or disabled */ - HAL_TIM_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ - HAL_TIM_STATE_BUSY = 0x02, /*!< An internal process is ongoing */ - HAL_TIM_STATE_TIMEOUT = 0x03, /*!< Timeout state */ - HAL_TIM_STATE_ERROR = 0x04 /*!< Reception process is ongoing */ -}HAL_TIM_StateTypeDef; - -/** - * @brief HAL Active channel structures definition - */ -typedef enum -{ - HAL_TIM_ACTIVE_CHANNEL_1 = 0x01, /*!< The active channel is 1 */ - HAL_TIM_ACTIVE_CHANNEL_2 = 0x02, /*!< The active channel is 2 */ - HAL_TIM_ACTIVE_CHANNEL_3 = 0x04, /*!< The active channel is 3 */ - HAL_TIM_ACTIVE_CHANNEL_4 = 0x08, /*!< The active channel is 4 */ - HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00 /*!< All active channels cleared */ -}HAL_TIM_ActiveChannel; - -/** - * @brief TIM Time Base Handle Structure definition - */ -typedef struct -{ - TIM_TypeDef *Instance; /*!< Register base address */ - TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ - HAL_TIM_ActiveChannel Channel; /*!< Active channel */ - DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array - This array is accessed by a @ref TIM_DMA_Handle_index */ - HAL_LockTypeDef Lock; /*!< Locking object */ - __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ -}TIM_HandleTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup TIM_Exported_Constants TIM Exported Constants - * @{ - */ - -/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel Polarity - * @{ - */ -#define TIM_INPUTCHANNELPOLARITY_RISING ((uint32_t)0x00000000) /*!< Polarity for TIx source */ -#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */ -#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ -/** - * @} - */ - -/** @defgroup TIM_ETR_Polarity TIM ETR Polarity - * @{ - */ -#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */ -#define TIM_ETRPOLARITY_NONINVERTED ((uint32_t)0x0000) /*!< Polarity for ETR source */ -/** - * @} - */ - -/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler - * @{ - */ -#define TIM_ETRPRESCALER_DIV1 ((uint32_t)0x0000) /*!< No prescaler is used */ -#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */ -#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */ -#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */ -/** - * @} - */ - -/** @defgroup TIM_Counter_Mode TIM Counter Mode - * @{ - */ -#define TIM_COUNTERMODE_UP ((uint32_t)0x0000) -#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR -#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 -#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 -#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS -/** - * @} - */ - -/** @defgroup TIM_ClockDivision TIM ClockDivision - * @{ - */ -#define TIM_CLOCKDIVISION_DIV1 ((uint32_t)0x0000) -#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0) -#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM modes - * @{ - */ -#define TIM_OCMODE_TIMING ((uint32_t)0x0000) -#define TIM_OCMODE_ACTIVE (TIM_CCMR1_OC1M_0) -#define TIM_OCMODE_INACTIVE (TIM_CCMR1_OC1M_1) -#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1) -#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) -#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M) -#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) -#define TIM_OCMODE_FORCED_INACTIVE (TIM_CCMR1_OC1M_2) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_State TIM Output Compare State - * @{ - */ -#define TIM_OUTPUTSTATE_DISABLE ((uint32_t)0x0000) -#define TIM_OUTPUTSTATE_ENABLE (TIM_CCER_CC1E) -/** - * @} - */ - -/** @defgroup TIM_Output_Fast_State TIM Output Fast State - * @{ - */ -#define TIM_OCFAST_DISABLE ((uint32_t)0x0000) -#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State - * @{ - */ -#define TIM_OUTPUTNSTATE_DISABLE ((uint32_t)0x0000) -#define TIM_OUTPUTNSTATE_ENABLE (TIM_CCER_CC1NE) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity - * @{ - */ -#define TIM_OCPOLARITY_HIGH ((uint32_t)0x0000) -#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity - * @{ - */ -#define TIM_OCNPOLARITY_HIGH ((uint32_t)0x0000) -#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State - * @{ - */ -#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1) -#define TIM_OCIDLESTATE_RESET ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State - * @{ - */ -#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N) -#define TIM_OCNIDLESTATE_RESET ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_Channel TIM Channel - * @{ - */ -#define TIM_CHANNEL_1 ((uint32_t)0x0000) -#define TIM_CHANNEL_2 ((uint32_t)0x0004) -#define TIM_CHANNEL_3 ((uint32_t)0x0008) -#define TIM_CHANNEL_4 ((uint32_t)0x000C) -#define TIM_CHANNEL_ALL ((uint32_t)0x0018) -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity - * @{ - */ -#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING -#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING -#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection - * @{ - */ -#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be - connected to IC1, IC2, IC3 or IC4, respectively */ -#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be - connected to IC2, IC1, IC4 or IC3, respectively */ -#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler - * @{ - */ -#define TIM_ICPSC_DIV1 ((uint32_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input */ -#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */ -#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */ -#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */ -/** - * @} - */ - -/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode - * @{ - */ -#define TIM_OPMODE_SINGLE (TIM_CR1_OPM) -#define TIM_OPMODE_REPETITIVE ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_Encoder_Mode TIM Encoder Mode - * @{ - */ -#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0) -#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1) -#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) -/** - * @} - */ - -/** @defgroup TIM_Interrupt_definition TIM Interrupt Definition - * @{ - */ -#define TIM_IT_UPDATE (TIM_DIER_UIE) -#define TIM_IT_CC1 (TIM_DIER_CC1IE) -#define TIM_IT_CC2 (TIM_DIER_CC2IE) -#define TIM_IT_CC3 (TIM_DIER_CC3IE) -#define TIM_IT_CC4 (TIM_DIER_CC4IE) -#define TIM_IT_COM (TIM_DIER_COMIE) -#define TIM_IT_TRIGGER (TIM_DIER_TIE) -#define TIM_IT_BREAK (TIM_DIER_BIE) -/** - * @} - */ - -/** @defgroup TIM_Commutation_Source TIM Commutation Source - * @{ - */ -#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS) -#define TIM_COMMUTATION_SOFTWARE ((uint32_t)0x0000) - -/** - * @} - */ - -/** @defgroup TIM_DMA_sources TIM DMA Sources - * @{ - */ -#define TIM_DMA_UPDATE (TIM_DIER_UDE) -#define TIM_DMA_CC1 (TIM_DIER_CC1DE) -#define TIM_DMA_CC2 (TIM_DIER_CC2DE) -#define TIM_DMA_CC3 (TIM_DIER_CC3DE) -#define TIM_DMA_CC4 (TIM_DIER_CC4DE) -#define TIM_DMA_COM (TIM_DIER_COMDE) -#define TIM_DMA_TRIGGER (TIM_DIER_TDE) -/** - * @} - */ - -/** @defgroup TIM_Event_Source TIM Event Source - * @{ - */ -#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG -#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G -#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G -#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G -#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G -#define TIM_EVENTSOURCE_COM TIM_EGR_COMG -#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG -#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG -/** - * @} - */ - -/** @defgroup TIM_Flag_definition TIM Flag Definition - * @{ - */ -#define TIM_FLAG_UPDATE (TIM_SR_UIF) -#define TIM_FLAG_CC1 (TIM_SR_CC1IF) -#define TIM_FLAG_CC2 (TIM_SR_CC2IF) -#define TIM_FLAG_CC3 (TIM_SR_CC3IF) -#define TIM_FLAG_CC4 (TIM_SR_CC4IF) -#define TIM_FLAG_COM (TIM_SR_COMIF) -#define TIM_FLAG_TRIGGER (TIM_SR_TIF) -#define TIM_FLAG_BREAK (TIM_SR_BIF) -#define TIM_FLAG_CC1OF (TIM_SR_CC1OF) -#define TIM_FLAG_CC2OF (TIM_SR_CC2OF) -#define TIM_FLAG_CC3OF (TIM_SR_CC3OF) -#define TIM_FLAG_CC4OF (TIM_SR_CC4OF) -/** - * @} - */ - -/** @defgroup TIM_Clock_Source TIM Clock Source - * @{ - */ -#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1) -#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0) -#define TIM_CLOCKSOURCE_ITR0 ((uint32_t)0x0000) -#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0) -#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1) -#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) -#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2) -#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) -#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) -#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS) -/** - * @} - */ - -/** @defgroup TIM_Clock_Polarity TIM Clock Polarity - * @{ - */ -#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ -#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ -#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ -#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ -#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ -/** - * @} - */ - -/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler - * @{ - */ -#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ -#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ -#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_ClearInput_Source TIM ClearInput Source - * @{ - */ -#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001) -#define TIM_CLEARINPUTSOURCE_OCREFCLR ((uint32_t)0x0002) -#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity - * @{ - */ -#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ -#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ -/** - * @} - */ - -/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler - * @{ - */ -#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ -#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ -#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR Off State Selection for Run mode state - * @{ - */ -#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR) -#define TIM_OSSR_DISABLE ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI Off State Selection for Idle mode state - * @{ - */ -#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI) -#define TIM_OSSI_DISABLE ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_Lock_level TIM Lock level - * @{ - */ -#define TIM_LOCKLEVEL_OFF ((uint32_t)0x0000) -#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0) -#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1) -#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK) -/** - * @} - */ - -/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable Disable - * @{ - */ -#define TIM_BREAK_ENABLE (TIM_BDTR_BKE) -#define TIM_BREAK_DISABLE ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_Break_Polarity TIM Break Input Polarity - * @{ - */ -#define TIM_BREAKPOLARITY_LOW ((uint32_t)0x0000) -#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP) -/** - * @} - */ -/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable - * @{ - */ -#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE) -#define TIM_AUTOMATICOUTPUT_DISABLE ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection - * @{ - */ -#define TIM_TRGO_RESET ((uint32_t)0x0000) -#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0) -#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1) -#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0)) -#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2) -#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0)) -#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1)) -#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0)) -/** - * @} - */ - -/** @defgroup TIM_Slave_Mode TIM Slave Mode - * @{ - */ -#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000) -#define TIM_SLAVEMODE_RESET ((uint32_t)0x0004) -#define TIM_SLAVEMODE_GATED ((uint32_t)0x0005) -#define TIM_SLAVEMODE_TRIGGER ((uint32_t)0x0006) -#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)0x0007) -/** - * @} - */ - -/** @defgroup TIM_Master_Slave_Mode TIM Master Slave Mode - * @{ - */ -#define TIM_MASTERSLAVEMODE_ENABLE ((uint32_t)0x0080) -#define TIM_MASTERSLAVEMODE_DISABLE ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_Trigger_Selection TIM Trigger Selection - * @{ - */ -#define TIM_TS_ITR0 ((uint32_t)0x0000) -#define TIM_TS_ITR1 ((uint32_t)0x0010) -#define TIM_TS_ITR2 ((uint32_t)0x0020) -#define TIM_TS_ITR3 ((uint32_t)0x0030) -#define TIM_TS_TI1F_ED ((uint32_t)0x0040) -#define TIM_TS_TI1FP1 ((uint32_t)0x0050) -#define TIM_TS_TI2FP2 ((uint32_t)0x0060) -#define TIM_TS_ETRF ((uint32_t)0x0070) -#define TIM_TS_NONE ((uint32_t)0xFFFF) -/** - * @} - */ - -/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity - * @{ - */ -#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ -#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ -#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -/** - * @} - */ - -/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler - * @{ - */ -#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ -#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ -#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection - * @{ - */ -#define TIM_TI1SELECTION_CH1 ((uint32_t)0x0000) -#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S) -/** - * @} - */ - -/** @defgroup TIM_DMA_Base_address TIM DMA Base Address - * @{ - */ -#define TIM_DMABASE_CR1 (0x00000000) -#define TIM_DMABASE_CR2 (0x00000001) -#define TIM_DMABASE_SMCR (0x00000002) -#define TIM_DMABASE_DIER (0x00000003) -#define TIM_DMABASE_SR (0x00000004) -#define TIM_DMABASE_EGR (0x00000005) -#define TIM_DMABASE_CCMR1 (0x00000006) -#define TIM_DMABASE_CCMR2 (0x00000007) -#define TIM_DMABASE_CCER (0x00000008) -#define TIM_DMABASE_CNT (0x00000009) -#define TIM_DMABASE_PSC (0x0000000A) -#define TIM_DMABASE_ARR (0x0000000B) -#define TIM_DMABASE_RCR (0x0000000C) -#define TIM_DMABASE_CCR1 (0x0000000D) -#define TIM_DMABASE_CCR2 (0x0000000E) -#define TIM_DMABASE_CCR3 (0x0000000F) -#define TIM_DMABASE_CCR4 (0x00000010) -#define TIM_DMABASE_BDTR (0x00000011) -#define TIM_DMABASE_DCR (0x00000012) -/** - * @} - */ - -/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length - * @{ - */ -#define TIM_DMABURSTLENGTH_1TRANSFER (0x00000000) -#define TIM_DMABURSTLENGTH_2TRANSFERS (0x00000100) -#define TIM_DMABURSTLENGTH_3TRANSFERS (0x00000200) -#define TIM_DMABURSTLENGTH_4TRANSFERS (0x00000300) -#define TIM_DMABURSTLENGTH_5TRANSFERS (0x00000400) -#define TIM_DMABURSTLENGTH_6TRANSFERS (0x00000500) -#define TIM_DMABURSTLENGTH_7TRANSFERS (0x00000600) -#define TIM_DMABURSTLENGTH_8TRANSFERS (0x00000700) -#define TIM_DMABURSTLENGTH_9TRANSFERS (0x00000800) -#define TIM_DMABURSTLENGTH_10TRANSFERS (0x00000900) -#define TIM_DMABURSTLENGTH_11TRANSFERS (0x00000A00) -#define TIM_DMABURSTLENGTH_12TRANSFERS (0x00000B00) -#define TIM_DMABURSTLENGTH_13TRANSFERS (0x00000C00) -#define TIM_DMABURSTLENGTH_14TRANSFERS (0x00000D00) -#define TIM_DMABURSTLENGTH_15TRANSFERS (0x00000E00) -#define TIM_DMABURSTLENGTH_16TRANSFERS (0x00000F00) -#define TIM_DMABURSTLENGTH_17TRANSFERS (0x00001000) -#define TIM_DMABURSTLENGTH_18TRANSFERS (0x00001100) -/** - * @} - */ - -/** @defgroup TIM_DMA_Handle_index TIM DMA Handle Index - * @{ - */ -#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0) /*!< Index of the DMA handle used for Update DMA requests */ -#define TIM_DMA_ID_CC1 ((uint16_t) 0x1) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ -#define TIM_DMA_ID_CC2 ((uint16_t) 0x2) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ -#define TIM_DMA_ID_CC3 ((uint16_t) 0x3) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ -#define TIM_DMA_ID_CC4 ((uint16_t) 0x4) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ -#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x5) /*!< Index of the DMA handle used for Commutation DMA requests */ -#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x6) /*!< Index of the DMA handle used for Trigger DMA requests */ -/** - * @} - */ - -/** @defgroup TIM_Channel_CC_State TIM Capture/Compare Channel State - * @{ - */ -#define TIM_CCx_ENABLE ((uint32_t)0x0001) -#define TIM_CCx_DISABLE ((uint32_t)0x0000) -#define TIM_CCxN_ENABLE ((uint32_t)0x0004) -#define TIM_CCxN_DISABLE ((uint32_t)0x0000) -/** - * @} - */ - -/** - * @} - */ - -/* Private Constants -----------------------------------------------------------*/ -/** @defgroup TIM_Private_Constants TIM Private Constants - * @{ - */ - -/* The counter of a timer instance is disabled only if all the CCx and CCxN - channels have been disabled */ -#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) -#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) - -/** - * @} - */ - -/* Private Macros -----------------------------------------------------------*/ -/** @defgroup TIM_Private_Macros TIM Private Macros - * @{ - */ - -#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \ - ((MODE) == TIM_COUNTERMODE_DOWN) || \ - ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \ - ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \ - ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3)) - -#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \ - ((DIV) == TIM_CLOCKDIVISION_DIV2) || \ - ((DIV) == TIM_CLOCKDIVISION_DIV4)) - -#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \ - ((MODE) == TIM_OCMODE_PWM2)) - -#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \ - ((MODE) == TIM_OCMODE_ACTIVE) || \ - ((MODE) == TIM_OCMODE_INACTIVE) || \ - ((MODE) == TIM_OCMODE_TOGGLE) || \ - ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \ - ((MODE) == TIM_OCMODE_FORCED_INACTIVE)) - -#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \ - ((STATE) == TIM_OCFAST_ENABLE)) - -#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \ - ((POLARITY) == TIM_OCPOLARITY_LOW)) - -#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \ - ((POLARITY) == TIM_OCNPOLARITY_LOW)) - -#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \ - ((STATE) == TIM_OCIDLESTATE_RESET)) - -#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \ - ((STATE) == TIM_OCNIDLESTATE_RESET)) - -#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \ - ((CHANNEL) == TIM_CHANNEL_2) || \ - ((CHANNEL) == TIM_CHANNEL_3) || \ - ((CHANNEL) == TIM_CHANNEL_4) || \ - ((CHANNEL) == TIM_CHANNEL_ALL)) - -#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \ - ((CHANNEL) == TIM_CHANNEL_2)) - -#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \ - ((CHANNEL) == TIM_CHANNEL_2) || \ - ((CHANNEL) == TIM_CHANNEL_3)) - -#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \ - ((POLARITY) == TIM_ICPOLARITY_FALLING) || \ - ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE)) - -#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \ - ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \ - ((SELECTION) == TIM_ICSELECTION_TRC)) - -#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \ - ((PRESCALER) == TIM_ICPSC_DIV2) || \ - ((PRESCALER) == TIM_ICPSC_DIV4) || \ - ((PRESCALER) == TIM_ICPSC_DIV8)) - -#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \ - ((MODE) == TIM_OPMODE_REPETITIVE)) - -#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \ - ((MODE) == TIM_ENCODERMODE_TI2) || \ - ((MODE) == TIM_ENCODERMODE_TI12)) - -#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FF) == 0x00000000) && ((SOURCE) != 0x00000000)) - -#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00) == 0x00000000) && ((SOURCE) != 0x00000000)) - -#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \ - ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \ - ((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \ - ((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \ - ((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \ - ((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \ - ((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \ - ((CLOCK) == TIM_CLOCKSOURCE_TI1) || \ - ((CLOCK) == TIM_CLOCKSOURCE_TI2) || \ - ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1)) - -#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \ - ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \ - ((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \ - ((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \ - ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE)) - -#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \ - ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \ - ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \ - ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8)) - -#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0xF) - -#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_ETR) || \ - ((SOURCE) == TIM_CLEARINPUTSOURCE_OCREFCLR) || \ - ((SOURCE) == TIM_CLEARINPUTSOURCE_NONE)) - -#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ - ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) - -#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \ - ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \ - ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \ - ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8)) - -#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0xF) - -#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \ - ((STATE) == TIM_OSSR_DISABLE)) - -#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \ - ((STATE) == TIM_OSSI_DISABLE)) - -#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \ - ((LEVEL) == TIM_LOCKLEVEL_1) || \ - ((LEVEL) == TIM_LOCKLEVEL_2) || \ - ((LEVEL) == TIM_LOCKLEVEL_3)) - -#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \ - ((STATE) == TIM_BREAK_DISABLE)) - -#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \ - ((POLARITY) == TIM_BREAKPOLARITY_HIGH)) - -#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \ - ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE)) - -#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \ - ((SOURCE) == TIM_TRGO_ENABLE) || \ - ((SOURCE) == TIM_TRGO_UPDATE) || \ - ((SOURCE) == TIM_TRGO_OC1) || \ - ((SOURCE) == TIM_TRGO_OC1REF) || \ - ((SOURCE) == TIM_TRGO_OC2REF) || \ - ((SOURCE) == TIM_TRGO_OC3REF) || \ - ((SOURCE) == TIM_TRGO_OC4REF)) - -#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \ - ((MODE) == TIM_SLAVEMODE_GATED) || \ - ((MODE) == TIM_SLAVEMODE_RESET) || \ - ((MODE) == TIM_SLAVEMODE_TRIGGER) || \ - ((MODE) == TIM_SLAVEMODE_EXTERNAL1)) - -#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \ - ((STATE) == TIM_MASTERSLAVEMODE_DISABLE)) - -#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ - ((SELECTION) == TIM_TS_ITR1) || \ - ((SELECTION) == TIM_TS_ITR2) || \ - ((SELECTION) == TIM_TS_ITR3) || \ - ((SELECTION) == TIM_TS_TI1F_ED) || \ - ((SELECTION) == TIM_TS_TI1FP1) || \ - ((SELECTION) == TIM_TS_TI2FP2) || \ - ((SELECTION) == TIM_TS_ETRF)) - -#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ - ((SELECTION) == TIM_TS_ITR1) || \ - ((SELECTION) == TIM_TS_ITR2) || \ - ((SELECTION) == TIM_TS_ITR3) || \ - ((SELECTION) == TIM_TS_NONE)) - -#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \ - ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ - ((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \ - ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \ - ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE )) - -#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \ - ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \ - ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \ - ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8)) - -#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0xF) - -#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \ - ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION)) - -#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABASE_CR1) || \ - ((BASE) == TIM_DMABASE_CR2) || \ - ((BASE) == TIM_DMABASE_SMCR) || \ - ((BASE) == TIM_DMABASE_DIER) || \ - ((BASE) == TIM_DMABASE_SR) || \ - ((BASE) == TIM_DMABASE_EGR) || \ - ((BASE) == TIM_DMABASE_CCMR1) || \ - ((BASE) == TIM_DMABASE_CCMR2) || \ - ((BASE) == TIM_DMABASE_CCER) || \ - ((BASE) == TIM_DMABASE_CNT) || \ - ((BASE) == TIM_DMABASE_PSC) || \ - ((BASE) == TIM_DMABASE_ARR) || \ - ((BASE) == TIM_DMABASE_RCR) || \ - ((BASE) == TIM_DMABASE_CCR1) || \ - ((BASE) == TIM_DMABASE_CCR2) || \ - ((BASE) == TIM_DMABASE_CCR3) || \ - ((BASE) == TIM_DMABASE_CCR4) || \ - ((BASE) == TIM_DMABASE_BDTR) || \ - ((BASE) == TIM_DMABASE_DCR)) - -#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABURSTLENGTH_1TRANSFER) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_18TRANSFERS)) - -#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) - -/** @brief Set TIM IC prescaler - * @param __HANDLE__: TIM handle - * @param __CHANNEL__: specifies TIM Channel - * @param __ICPSC__: specifies the prescaler value. - * @retval None - */ -#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ -(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ - ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8))) - -/** @brief Reset TIM IC prescaler - * @param __HANDLE__: TIM handle - * @param __CHANNEL__: specifies TIM Channel - * @retval None - */ -#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ -(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ - ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) - - -/** @brief Set TIM IC polarity - * @param __HANDLE__: TIM handle - * @param __CHANNEL__: specifies TIM Channel - * @param __POLARITY__: specifies TIM Channel Polarity - * @retval None - */ -#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ -(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8)) :\ - ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12) & TIM_CCER_CC4P))) - -/** @brief Reset TIM IC polarity - * @param __HANDLE__: TIM handle - * @param __CHANNEL__: specifies TIM Channel - * @retval None - */ -#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ -(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ - ((__HANDLE__)->Instance->CCER &= (uint16_t)~TIM_CCER_CC4P)) - -/** - * @} - */ - -/* Private Functions --------------------------------------------------------*/ -/** @addtogroup TIM_Private_Functions - * @{ - */ -void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure); -void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); -void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); -void TIM_DMAError(DMA_HandleTypeDef *hdma); -void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); -void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState); -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup TIM_Exported_Macros TIM Exported Macros - * @{ - */ - -/** @brief Reset TIM handle state - * @param __HANDLE__: TIM handle. - * @retval None - */ -#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET) - -/** - * @brief Enable the TIM peripheral. - * @param __HANDLE__: TIM handle - * @retval None - */ -#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) - -/** - * @brief Enable the TIM main Output. - * @param __HANDLE__: TIM handle - * @retval None - */ -#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) - -/** - * @brief Disable the TIM peripheral. - * @param __HANDLE__: TIM handle - * @retval None - */ -#define __HAL_TIM_DISABLE(__HANDLE__) \ - do { \ - if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \ - { \ - if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \ - { \ - (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ - } \ - } \ - } while(0) -/* The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN - channels have been disabled */ -/** - * @brief Disable the TIM main Output. - * @param __HANDLE__: TIM handle - * @retval None - * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been disabled - */ -#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ - do { \ - if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \ - { \ - if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \ - { \ - (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ - } \ - } \ - } while(0) - -/** - * @brief Enables the specified TIM interrupt. - * @param __HANDLE__: specifies the TIM Handle. - * @param __INTERRUPT__: specifies the TIM interrupt source to enable. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval None - */ -#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) - -/** - * @brief Disables the specified TIM interrupt. - * @param __HANDLE__: specifies the TIM Handle. - * @param __INTERRUPT__: specifies the TIM interrupt source to disable. - * This parameter can be one of the following values: - * @arg TIM_IT_UPDATE: Update interrupt - * @arg TIM_IT_CC1: Capture/Compare 1 interrupt - * @arg TIM_IT_CC2: Capture/Compare 2 interrupt - * @arg TIM_IT_CC3: Capture/Compare 3 interrupt - * @arg TIM_IT_CC4: Capture/Compare 4 interrupt - * @arg TIM_IT_COM: Commutation interrupt - * @arg TIM_IT_TRIGGER: Trigger interrupt - * @arg TIM_IT_BREAK: Break interrupt - * @retval None - */ -#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) - -/** - * @brief Enables the specified DMA request. - * @param __HANDLE__: specifies the TIM Handle. - * @param __DMA__: specifies the TIM DMA request to enable. - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: Update DMA request - * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request - * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request - * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request - * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request - * @arg TIM_DMA_COM: Commutation DMA request - * @arg TIM_DMA_TRIGGER: Trigger DMA request - * @retval None - */ -#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) - -/** - * @brief Disables the specified DMA request. - * @param __HANDLE__: specifies the TIM Handle. - * @param __DMA__: specifies the TIM DMA request to disable. - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: Update DMA request - * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request - * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request - * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request - * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request - * @arg TIM_DMA_COM: Commutation DMA request - * @arg TIM_DMA_TRIGGER: Trigger DMA request - * @retval None - */ -#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) - -/** - * @brief Checks whether the specified TIM interrupt flag is set or not. - * @param __HANDLE__: specifies the TIM Handle. - * @param __FLAG__: specifies the TIM interrupt flag to check. - * This parameter can be one of the following values: - * @arg TIM_FLAG_UPDATE: Update interrupt flag - * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag - * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag - * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag - * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag - * @arg TIM_FLAG_COM: Commutation interrupt flag - * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag - * @arg TIM_FLAG_BREAK: Break interrupt flag - * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag - * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag - * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag - * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) - -/** - * @brief Clears the specified TIM interrupt flag. - * @param __HANDLE__: specifies the TIM Handle. - * @param __FLAG__: specifies the TIM interrupt flag to clear. - * This parameter can be one of the following values: - * @arg TIM_FLAG_UPDATE: Update interrupt flag - * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag - * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag - * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag - * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag - * @arg TIM_FLAG_COM: Commutation interrupt flag - * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag - * @arg TIM_FLAG_BREAK: Break interrupt flag - * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag - * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag - * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag - * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) - -/** - * @brief Checks whether the specified TIM interrupt has occurred or not. - * @param __HANDLE__: TIM handle - * @param __INTERRUPT__: specifies the TIM interrupt source to check. - * @retval The state of TIM_IT (SET or RESET). - */ -#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** - * @brief Clear the TIM interrupt pending bits - * @param __HANDLE__: TIM handle - * @param __INTERRUPT__: specifies the interrupt pending bit to clear. - * @retval None - */ -#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) - -/** - * @brief Indicates whether or not the TIM Counter is used as downcounter - * @param __HANDLE__: TIM handle. - * @retval False (Counter used as upcounter) or True (Counter used as downcounter) - * @note This macro is particularly usefull to get the counting mode when the timer operates in Center-aligned mode or Encoder -mode. - */ -#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 & (TIM_CR1_DIR)) == (TIM_CR1_DIR)) - -/** - * @brief Sets the TIM active prescaler register value on update event. - * @param __HANDLE__: TIM handle. - * @param __PRESC__: specifies the active prescaler register new value. - * @retval None - */ -#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) - -/** - * @brief Sets the TIM Capture Compare Register value on runtime without - * calling another time ConfigChannel function. - * @param __HANDLE__: TIM handle. - * @param __CHANNEL__ : TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param __COMPARE__: specifies the Capture Compare register new value. - * @retval None - */ -#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ -(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)) = (__COMPARE__)) - -/** - * @brief Gets the TIM Capture Compare Register value on runtime - * @param __HANDLE__: TIM handle. - * @param __CHANNEL__ : TIM Channel associated with the capture compare register - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: get capture/compare 1 register value - * @arg TIM_CHANNEL_2: get capture/compare 2 register value - * @arg TIM_CHANNEL_3: get capture/compare 3 register value - * @arg TIM_CHANNEL_4: get capture/compare 4 register value - * @retval None - */ -#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ - (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2))) - -/** - * @brief Sets the TIM Counter Register value on runtime. - * @param __HANDLE__: TIM handle. - * @param __COUNTER__: specifies the Counter register new value. - * @retval None - */ -#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) - -/** - * @brief Gets the TIM Counter Register value on runtime. - * @param __HANDLE__: TIM handle. - * @retval None - */ -#define __HAL_TIM_GET_COUNTER(__HANDLE__) \ - ((__HANDLE__)->Instance->CNT) - -/** - * @brief Sets the TIM Autoreload Register value on runtime without calling - * another time any Init function. - * @param __HANDLE__: TIM handle. - * @param __AUTORELOAD__: specifies the Counter register new value. - * @retval None - */ -#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ - do{ \ - (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ - (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ - } while(0) - -/** - * @brief Gets the TIM Autoreload Register value on runtime - * @param __HANDLE__: TIM handle. - * @retval None - */ -#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) \ - ((__HANDLE__)->Instance->ARR) - -/** - * @brief Sets the TIM Clock Division value on runtime without calling - * another time any Init function. - * @param __HANDLE__: TIM handle. - * @param __CKD__: specifies the clock division value. - * This parameter can be one of the following value: - * @arg TIM_CLOCKDIVISION_DIV1 - * @arg TIM_CLOCKDIVISION_DIV2 - * @arg TIM_CLOCKDIVISION_DIV4 - * @retval None - */ -#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ - do{ \ - (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \ - (__HANDLE__)->Instance->CR1 |= (__CKD__); \ - (__HANDLE__)->Init.ClockDivision = (__CKD__); \ - } while(0) - -/** - * @brief Gets the TIM Clock Division value on runtime - * @param __HANDLE__: TIM handle. - * @retval None - */ -#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) \ - ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) - -/** - * @brief Sets the TIM Input Capture prescaler on runtime without calling - * another time HAL_TIM_IC_ConfigChannel() function. - * @param __HANDLE__: TIM handle. - * @param __CHANNEL__ : TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param __ICPSC__: specifies the Input Capture4 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ - do{ \ - TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ - TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ - } while(0) - -/** - * @brief Gets the TIM Input Capture prescaler on runtime - * @param __HANDLE__: TIM handle. - * @param __CHANNEL__: TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: get input capture 1 prescaler value - * @arg TIM_CHANNEL_2: get input capture 2 prescaler value - * @arg TIM_CHANNEL_3: get input capture 3 prescaler value - * @arg TIM_CHANNEL_4: get input capture 4 prescaler value - * @retval None - */ -#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ - (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8) - -/** - * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register - * @param __HANDLE__: TIM handle. - * @note When the USR bit of the TIMx_CR1 register is set, only counter - * overflow/underflow generates an update interrupt or DMA request (if - * enabled) - * @retval None - */ -#define __HAL_TIM_URS_ENABLE(__HANDLE__) \ - ((__HANDLE__)->Instance->CR1|= (TIM_CR1_URS)) - -/** - * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register - * @param __HANDLE__: TIM handle. - * @note When the USR bit of the TIMx_CR1 register is reset, any of the - * following events generate an update interrupt or DMA request (if - * enabled): - * (+) Counter overflow/underflow - * (+) Setting the UG bit - * (+) Update generation through the slave mode controller - * @retval None - */ -#define __HAL_TIM_URS_DISABLE(__HANDLE__) \ - ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS)) - -/** - * @brief Sets the TIM Capture x input polarity on runtime. - * @param __HANDLE__: TIM handle. - * @param __CHANNEL__: TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param __POLARITY__: Polarity for TIx source - * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge - * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge - * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge - * @note The polarity TIM_INPUTCHANNELPOLARITY_BOTHEDGE is not authorized for TIM Channel 4. - * @retval None - */ -#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ - do{ \ - TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ - TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ - }while(0) - -/** - * @} - */ - -/* Include TIM HAL Extension module */ -#include "stm32f1xx_hal_tim_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup TIM_Exported_Functions - * @{ - */ - -/** @addtogroup TIM_Exported_Functions_Group1 - * @{ - */ -/* Time Base functions ********************************************************/ -HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group2 - * @{ - */ -/* Timer Output Compare functions **********************************************/ -HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); - -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group3 - * @{ - */ -/* Timer PWM functions *********************************************************/ -HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group4 - * @{ - */ -/* Timer Input Capture functions ***********************************************/ -HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group5 - * @{ - */ -/* Timer One Pulse functions ***************************************************/ -HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); -HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group6 - * @{ - */ -/* Timer Encoder functions *****************************************************/ -HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig); -HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); - /* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); - -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group7 - * @{ - */ -/* Interrupt Handler functions **********************************************/ -void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group8 - * @{ - */ -/* Control functions *********************************************************/ -HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel); -HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig); -HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig); -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig); -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \ - uint32_t *BurstBuffer, uint32_t BurstLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \ - uint32_t *BurstBuffer, uint32_t BurstLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); -HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); -uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); - -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group9 - * @{ - */ -/* Callback in non blocking modes (Interrupt and DMA) *************************/ -void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group10 - * @{ - */ -/* Peripheral State functions **************************************************/ -HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_TIM_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h deleted file mode 100644 index b6410ac..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h +++ /dev/null @@ -1,312 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_tim_ex.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of TIM HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_TIM_EX_H -#define __STM32F1xx_HAL_TIM_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup TIMEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Types TIMEx Exported Types - * @{ - */ - - -/** - * @brief TIM Hall sensor Configuration Structure definition - */ - -typedef struct -{ - - uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC1Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ -} TIM_HallSensor_InitTypeDef; - - -#if defined (STM32F100xB) || defined (STM32F100xE) || \ - defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \ - defined (STM32F105xC) || defined (STM32F107xC) - -/** - * @brief TIM Break and Dead time configuration Structure definition - */ -typedef struct -{ - uint32_t OffStateRunMode; /*!< TIM off state in run mode - This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ - uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode - This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ - uint32_t LockLevel; /*!< TIM Lock level - This parameter can be a value of @ref TIM_Lock_level */ - uint32_t DeadTime; /*!< TIM dead Time - This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ - uint32_t BreakState; /*!< TIM Break State - This parameter can be a value of @ref TIM_Break_Input_enable_disable */ - uint32_t BreakPolarity; /*!< TIM Break input polarity - This parameter can be a value of @ref TIM_Break_Polarity */ - uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state - This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ -} TIM_BreakDeadTimeConfigTypeDef; - -#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */ - /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */ - /* defined(STM32F105xC) || defined(STM32F107xC) */ - -/** - * @brief TIM Master configuration Structure definition - */ -typedef struct { - uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection - This parameter can be a value of @ref TIM_Master_Mode_Selection */ - uint32_t MasterSlaveMode; /*!< Master/slave mode selection - This parameter can be a value of @ref TIM_Master_Slave_Mode */ -}TIM_MasterConfigTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -#if defined (STM32F100xB) || defined (STM32F100xE) || \ - defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \ - defined (STM32F105xC) || defined (STM32F107xC) -/** @defgroup TIMEx_Exported_Constants TIMEx Exported Constants - * @{ - */ - -/** @defgroup TIMEx_Clock_Filter TIMEx Clock Filter - * @{ - */ -#define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFF) /*!< BreakDead Time */ -/** - * @} - */ - -/** - * @} - */ -#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */ - /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */ - /* defined(STM32F105xC) || defined(STM32F107xC) */ - -/* Exported macro ------------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup TIMEx_Exported_Functions - * @{ - */ - -/** @addtogroup TIMEx_Exported_Functions_Group1 - * @{ - */ -/* Timer Hall Sensor functions **********************************************/ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); - -void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); - - /* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); -/** - * @} - */ - -#if defined (STM32F100xB) || defined (STM32F100xE) || \ - defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \ - defined (STM32F105xC) || defined (STM32F107xC) - -/** @addtogroup TIMEx_Exported_Functions_Group2 - * @{ - */ -/* Timer Complementary Output Compare functions *****************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); - -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group3 - * @{ - */ -/* Timer Complementary PWM functions ****************************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group4 - * @{ - */ -/* Timer Complementary One Pulse functions **********************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -/** - * @} - */ -#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */ - /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */ - /* defined(STM32F105xC) || defined(STM32F107xC) */ - -/** @addtogroup TIMEx_Exported_Functions_Group5 - * @{ - */ -/* Extended Control functions ************************************************/ -#if defined (STM32F100xB) || defined (STM32F100xE) || \ - defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \ - defined (STM32F105xC) || defined (STM32F107xC) -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); -#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */ - /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */ - /* defined(STM32F105xC) || defined(STM32F107xC) */ -HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group6 - * @{ - */ -/* Extension Callback *********************************************************/ -void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim); -void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); -/** - * @} - */ - -#if defined (STM32F100xB) || defined (STM32F100xE) || \ - defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \ - defined (STM32F105xC) || defined (STM32F107xC) -/** @addtogroup TIMEx_Exported_Functions_Group7 - * @{ - */ -/* Extension Peripheral State functions **************************************/ -HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); -/** - * @} - */ -#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */ - /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */ - /* defined(STM32F105xC) || defined(STM32F107xC) */ - -/** - * @} - */ -/* End of exported functions -------------------------------------------------*/ - -/* Private functions----------------------------------------------------------*/ -/** @defgroup TIMEx_Private_Functions TIMEx Private Functions -* @{ -*/ -void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); -/** -* @} -*/ -/* End of private functions --------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F1xx_HAL_TIM_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h deleted file mode 100644 index 976756c..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h +++ /dev/null @@ -1,751 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_uart.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of UART HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_UART_H -#define __STM32F1xx_HAL_UART_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup UART - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup UART_Exported_Types UART Exported Types - * @{ - */ - - -/** - * @brief UART Init Structure definition - */ -typedef struct -{ - uint32_t BaudRate; /*!< This member configures the UART communication baud rate. - The baud rate is computed using the following formula: - - IntegerDivider = ((PCLKx) / (16 * (huart->Init.BaudRate))) - - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */ - - uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref UART_Word_Length */ - - uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. - This parameter can be a value of @ref UART_Stop_Bits */ - - uint32_t Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref UART_Parity - @note When parity is enabled, the computed parity is inserted - at the MSB position of the transmitted data (9th bit when - the word length is set to 9 data bits; 8th bit when the - word length is set to 8 data bits). */ - - uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref UART_Mode */ - - uint32_t HwFlowCtl; /*!< Specifies wether the hardware flow control mode is enabled - or disabled. - This parameter can be a value of @ref UART_Hardware_Flow_Control */ - - uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8). - This parameter can be a value of @ref UART_Over_Sampling. This feature is not available - on STM32F1xx family, so OverSampling parameter should always be set to 16. */ -}UART_InitTypeDef; - -/** - * @brief HAL UART State structures definition - */ -typedef enum -{ - HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */ - HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ - HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ - HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ - HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ - HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ - HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */ - HAL_UART_STATE_ERROR = 0x04 /*!< Error */ -}HAL_UART_StateTypeDef; - - -/** - * @brief UART handle Structure definition - */ -typedef struct -{ - USART_TypeDef *Instance; /*!< UART registers base address */ - - UART_InitTypeDef Init; /*!< UART communication parameters */ - - uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ - - uint16_t TxXferSize; /*!< UART Tx Transfer size */ - - uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ - - uint16_t RxXferSize; /*!< UART Rx Transfer size */ - - uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ - - DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ - - HAL_LockTypeDef Lock; /*!< Locking object */ - - __IO HAL_UART_StateTypeDef State; /*!< UART communication state */ - - __IO uint32_t ErrorCode; /*!< UART Error code */ - -}UART_HandleTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup UART_Exported_Constants UART Exported constants - * @{ - */ - -/** @defgroup UART_Error_Codes UART Error Codes - * @{ - */ - -#define HAL_UART_ERROR_NONE ((uint32_t)0x00) /*!< No error */ -#define HAL_UART_ERROR_PE ((uint32_t)0x01) /*!< Parity error */ -#define HAL_UART_ERROR_NE ((uint32_t)0x02) /*!< Noise error */ -#define HAL_UART_ERROR_FE ((uint32_t)0x04) /*!< frame error */ -#define HAL_UART_ERROR_ORE ((uint32_t)0x08) /*!< Overrun error */ -#define HAL_UART_ERROR_DMA ((uint32_t)0x10) /*!< DMA transfer error */ - -/** - * @} - */ - - - - -/** @defgroup UART_Word_Length UART Word Length - * @{ - */ -#define UART_WORDLENGTH_8B ((uint32_t)0x00000000) -#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M) -/** - * @} - */ - -/** @defgroup UART_Stop_Bits UART Number of Stop Bits - * @{ - */ -#define UART_STOPBITS_1 ((uint32_t)0x00000000) -#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) -/** - * @} - */ - -/** @defgroup UART_Parity UART Parity - * @{ - */ -#define UART_PARITY_NONE ((uint32_t)0x00000000) -#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) -#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) -/** - * @} - */ - -/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control - * @{ - */ -#define UART_HWCONTROL_NONE ((uint32_t)0x00000000) -#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE) -#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE) -#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE)) -/** - * @} - */ - -/** @defgroup UART_Mode UART Transfer Mode - * @{ - */ -#define UART_MODE_RX ((uint32_t)USART_CR1_RE) -#define UART_MODE_TX ((uint32_t)USART_CR1_TE) -#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) - -/** - * @} - */ - - /** @defgroup UART_State UART State - * @{ - */ -#define UART_STATE_DISABLE ((uint32_t)0x00000000) -#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE) -/** - * @} - */ - -/** @defgroup UART_Over_Sampling UART Over Sampling - * @{ - */ -#define UART_OVERSAMPLING_16 ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length - * @{ - */ -#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000) -#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL) -/** - * @} - */ - -/** @defgroup UART_WakeUp_functions UART Wakeup Functions - * @{ - */ -#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000) -#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE) -/** - * @} - */ - -/** @defgroup UART_Flags UART FLags - * Elements values convention: 0xXXXX - * - 0xXXXX : Flag mask in the SR register - * @{ - */ -#define UART_FLAG_CTS ((uint32_t)USART_SR_CTS) -#define UART_FLAG_LBD ((uint32_t)USART_SR_LBD) -#define UART_FLAG_TXE ((uint32_t)USART_SR_TXE) -#define UART_FLAG_TC ((uint32_t)USART_SR_TC) -#define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE) -#define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE) -#define UART_FLAG_ORE ((uint32_t)USART_SR_ORE) -#define UART_FLAG_NE ((uint32_t)USART_SR_NE) -#define UART_FLAG_FE ((uint32_t)USART_SR_FE) -#define UART_FLAG_PE ((uint32_t)USART_SR_PE) -/** - * @} - */ - -/** @defgroup UART_Interrupt_definition UART Interrupt Definitions - * Elements values convention: 0xY000XXXX - * - XXXX : Interrupt mask (16 bits) in the Y register - * - Y : Interrupt source register (2bits) - * - 0001: CR1 register - * - 0010: CR2 register - * - 0011: CR3 register - * - * @{ - */ - -#define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_PEIE)) -#define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_TXEIE)) -#define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_TCIE)) -#define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE)) -#define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE)) - -#define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28 | USART_CR2_LBDIE)) - -#define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28 | USART_CR3_CTSIE)) -#define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28 | USART_CR3_EIE)) - -/** - * @} - */ - -/** - * @} - */ - - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup UART_Exported_Macros UART Exported Macros - * @{ - */ - - -/** @brief Reset UART handle state - * @param __HANDLE__: specifies the UART Handle. - * UART Handle selects the USARTx or UARTy peripheral - * (USART,UART availability and x,y values depending on device). - * @retval None - */ -#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET) - -/** @brief Flush the UART DR register - * @param __HANDLE__: specifies the UART Handle. - * UART Handle selects the USARTx or UARTy peripheral - * (USART,UART availability and x,y values depending on device). - */ -#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) - -/** @brief Check whether the specified UART flag is set or not. - * @param __HANDLE__: specifies the UART Handle. - * UART Handle selects the USARTx or UARTy peripheral - * (USART,UART availability and x,y values depending on device). - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) - * @arg UART_FLAG_LBD: LIN Break detection flag - * @arg UART_FLAG_TXE: Transmit data register empty flag - * @arg UART_FLAG_TC: Transmission Complete flag - * @arg UART_FLAG_RXNE: Receive data register not empty flag - * @arg UART_FLAG_IDLE: Idle Line detection flag - * @arg UART_FLAG_ORE: OverRun Error flag - * @arg UART_FLAG_NE: Noise Error flag - * @arg UART_FLAG_FE: Framing Error flag - * @arg UART_FLAG_PE: Parity Error flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the specified UART pending flag. - * @param __HANDLE__: specifies the UART Handle. - * UART Handle selects the USARTx or UARTy peripheral - * (USART,UART availability and x,y values depending on device). - * @param __FLAG__: specifies the flag to check. - * This parameter can be any combination of the following values: - * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). - * @arg UART_FLAG_LBD: LIN Break detection flag. - * @arg UART_FLAG_TC: Transmission Complete flag. - * @arg UART_FLAG_RXNE: Receive data register not empty flag. - * - * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun - * error) and IDLE (Idle line detected) flags are cleared by software - * sequence: a read operation to USART_SR register followed by a read - * operation to USART_DR register. - * @note RXNE flag can be also cleared by a read to the USART_DR register. - * @note TC flag can be also cleared by software sequence: a read operation to - * USART_SR register followed by a write operation to USART_DR register. - * @note TXE flag is cleared only by a write to the USART_DR register. - * - * @retval None - */ -#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) - -/** @brief Clear the UART PE pending flag. - * @param __HANDLE__: specifies the UART Handle. - * UART Handle selects the USARTx or UARTy peripheral - * (USART,UART availability and x,y values depending on device). - * @retval None - */ -#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \ -do{ \ - __IO uint32_t tmpreg; \ - tmpreg = (__HANDLE__)->Instance->SR; \ - tmpreg = (__HANDLE__)->Instance->DR; \ - UNUSED(tmpreg); \ -}while(0) - - - -/** @brief Clear the UART FE pending flag. - * @param __HANDLE__: specifies the UART Handle. - * UART Handle selects the USARTx or UARTy peripheral - * (USART,UART availability and x,y values depending on device). - * @retval None - */ -#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the UART NE pending flag. - * @param __HANDLE__: specifies the UART Handle. - * UART Handle selects the USARTx or UARTy peripheral - * (USART,UART availability and x,y values depending on device). - * @retval None - */ -#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the UART ORE pending flag. - * @param __HANDLE__: specifies the UART Handle. - * UART Handle selects the USARTx or UARTy peripheral - * (USART,UART availability and x,y values depending on device). - * @retval None - */ -#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the UART IDLE pending flag. - * @param __HANDLE__: specifies the UART Handle. - * UART Handle selects the USARTx or UARTy peripheral - * (USART,UART availability and x,y values depending on device). - * @retval None - */ -#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Enable the specified UART interrupt. - * @param __HANDLE__: specifies the UART Handle. - * UART Handle selects the USARTx or UARTy peripheral - * (USART,UART availability and x,y values depending on device). - * @param __INTERRUPT__: specifies the UART interrupt source to enable. - * This parameter can be one of the following values: - * @arg UART_IT_CTS: CTS change interrupt - * @arg UART_IT_LBD: LIN Break detection interrupt - * @arg UART_IT_TXE: Transmit Data Register empty interrupt - * @arg UART_IT_TC: Transmission complete interrupt - * @arg UART_IT_RXNE: Receive Data register not empty interrupt - * @arg UART_IT_IDLE: Idle line detection interrupt - * @arg UART_IT_PE: Parity Error interrupt - * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \ - (((__INTERRUPT__) >> 28) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \ - ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK))) - - -/** @brief Disable the specified UART interrupt. - * @param __HANDLE__: specifies the UART Handle. - * UART Handle selects the USARTx or UARTy peripheral - * (USART,UART availability and x,y values depending on device). - * @param __INTERRUPT__: specifies the UART interrupt source to disable. - * This parameter can be one of the following values: - * @arg UART_IT_CTS: CTS change interrupt - * @arg UART_IT_LBD: LIN Break detection interrupt - * @arg UART_IT_TXE: Transmit Data Register empty interrupt - * @arg UART_IT_TC: Transmission complete interrupt - * @arg UART_IT_RXNE: Receive Data register not empty interrupt - * @arg UART_IT_IDLE: Idle line detection interrupt - * @arg UART_IT_PE: Parity Error interrupt - * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == UART_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \ - (((__INTERRUPT__) >> 28) == UART_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \ - ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK))) - -/** @brief Check whether the specified UART interrupt has occurred or not. - * @param __HANDLE__: specifies the UART Handle. - * UART Handle selects the USARTx or UARTy peripheral - * (USART,UART availability and x,y values depending on device). - * @param __IT__: specifies the UART interrupt source to check. - * This parameter can be one of the following values: - * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) - * @arg UART_IT_LBD: LIN Break detection interrupt - * @arg UART_IT_TXE: Transmit Data Register empty interrupt - * @arg UART_IT_TC: Transmission complete interrupt - * @arg UART_IT_RXNE: Receive Data register not empty interrupt - * @arg UART_IT_IDLE: Idle line detection interrupt - * @arg UART_IT_ERR: Error interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == UART_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == UART_CR2_REG_INDEX)? \ - (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK)) - -/** @brief Enable CTS flow control - * This macro allows to enable CTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__: specifies the UART Handle. - * This parameter can be any USARTx (supporting the HW Flow control feature). - * It is used to select the USART peripheral (USART availability and x value depending on device). - * @retval None - */ -#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ - do{ \ - SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ - (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ - } while(0) - -/** @brief Disable CTS flow control - * This macro allows to disable CTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__: specifies the UART Handle. - * This parameter can be any USARTx (supporting the HW Flow control feature). - * It is used to select the USART peripheral (USART availability and x value depending on device). - * @retval None - */ -#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ - do{ \ - CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ - (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ - } while(0) - -/** @brief Enable RTS flow control - * This macro allows to enable RTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__: specifies the UART Handle. - * This parameter can be any USARTx (supporting the HW Flow control feature). - * It is used to select the USART peripheral (USART availability and x value depending on device). - * @retval None - */ -#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ - do{ \ - SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ - (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ - } while(0) - -/** @brief Disable RTS flow control - * This macro allows to disable RTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__: specifies the UART Handle. - * This parameter can be any USARTx (supporting the HW Flow control feature). - * It is used to select the USART peripheral (USART availability and x value depending on device). - * @retval None - */ -#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ - do{ \ - CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ - (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ - } while(0) - - -/** @brief Enable UART - * @param __HANDLE__: specifies the UART Handle. - * UART Handle selects the USARTx or UARTy peripheral - * (USART,UART availability and x,y values depending on device). - * @retval None - */ -#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) - -/** @brief Disable UART - * UART Handle selects the USARTx or UARTy peripheral - * (USART,UART availability and x,y values depending on device). - * @retval None - */ -#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) - -/** - * @} - */ - - -/* Private macros --------------------------------------------------------*/ -/** @defgroup UART_Private_Macros UART Private Macros - * @{ - */ - -#define UART_CR1_REG_INDEX 1 -#define UART_CR2_REG_INDEX 2 -#define UART_CR3_REG_INDEX 3 - -#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_))) -#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100) -#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100) -/* UART BRR = mantissa + overflow + fraction - = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0F) */ -#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4) + \ - (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0xF0)) + \ - (UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0F)) -#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \ - ((LENGTH) == UART_WORDLENGTH_9B)) -#define IS_UART_LIN_WORD_LENGTH(LENGTH) ((LENGTH) == UART_WORDLENGTH_8B) - -#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \ - ((STOPBITS) == UART_STOPBITS_2)) - -#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \ - ((PARITY) == UART_PARITY_EVEN) || \ - ((PARITY) == UART_PARITY_ODD)) - -#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\ - (((CONTROL) == UART_HWCONTROL_NONE) || \ - ((CONTROL) == UART_HWCONTROL_RTS) || \ - ((CONTROL) == UART_HWCONTROL_CTS) || \ - ((CONTROL) == UART_HWCONTROL_RTS_CTS)) - -#define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)UART_MODE_TX_RX))) == 0x00) && \ - ((MODE) != (uint32_t)0x00000000)) - -#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \ - ((STATE) == UART_STATE_ENABLE)) - -#define IS_UART_OVERSAMPLING(SAMPLING) ((SAMPLING) == UART_OVERSAMPLING_16) -#define IS_UART_LIN_OVERSAMPLING(SAMPLING) ((SAMPLING) == UART_OVERSAMPLING_16) - -#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \ - ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B)) - -#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \ - ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK)) - - -/** Check UART Baud rate - * __BAUDRATE__: Baudrate specified by the user - * The maximum Baud Rate is derived from the maximum clock on APB (i.e. 72 MHz) - * divided by the smallest oversampling used on the USART (i.e. 16) - * Retrun : TRUE or FALSE - */ -#define IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4500001) - -/** Check UART Node Address - * __ADDRESS__: UART Node address specified by the user - * UART Node address is used in Multi processor communication for wakeup - * with address mark detection. - * This parameter must be a number between Min_Data = 0 and Max_Data = 15 - * Return : TRUE or FALSE - */ -#define IS_UART_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xF) - -/** UART interruptions flag mask - */ -#define UART_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \ - USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE ) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup UART_Exported_Functions UART Exported Functions - * @{ - */ - -/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ - -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); -HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); -HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart); -void HAL_UART_MspInit(UART_HandleTypeDef *huart); -void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group2 IO operation functions - * @{ - */ - -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); -void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); -void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ - -/* Peripheral Control functions ************************************************/ -HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Errors functions - * @{ - */ - -/* Peripheral State and Errors functions **************************************************/ -HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart); -uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_UART_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h deleted file mode 100644 index 3579c3d..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h +++ /dev/null @@ -1,616 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_ll_usb.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of USB Low Layer HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_LL_USB_H -#define __STM32F1xx_LL_USB_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F102x6) || defined(STM32F102xB) || \ - defined(STM32F103x6) || defined(STM32F103xB) || \ - defined(STM32F103xE) || defined(STM32F103xG) || \ - defined(STM32F105xC) || defined(STM32F107xC) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup USB_LL - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup USB_LL_Exported_Types USB Low Layer Exported Types - * @{ - */ -/** - * @brief USB Mode definition - */ -typedef enum -{ - USB_DEVICE_MODE = 0, - USB_HOST_MODE = 1, - USB_DRD_MODE = 2 -}USB_ModeTypeDef; - -#if defined (USB_OTG_FS) -/** - * @brief URB States definition - */ -typedef enum { - URB_IDLE = 0, - URB_DONE, - URB_NOTREADY, - URB_NYET, - URB_ERROR, - URB_STALL -}USB_OTG_URBStateTypeDef; - -/** - * @brief Host channel States definition - */ -typedef enum { - HC_IDLE = 0, - HC_XFRC, - HC_HALTED, - HC_NAK, - HC_NYET, - HC_STALL, - HC_XACTERR, - HC_BBLERR, - HC_DATATGLERR -}USB_OTG_HCStateTypeDef; - -/** - * @brief USB OTG Initialization Structure definition - */ -typedef struct -{ - uint32_t dev_endpoints; /*!< Device Endpoints number. - This parameter depends on the used USB core. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t Host_channels; /*!< Host Channels number. - This parameter Depends on the used USB core. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t speed; /*!< USB Core speed. - This parameter can be any value of @ref USB_Core_Speed_ */ - - uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. - This parameter can be any value of @ref USB_EP0_MPS_ */ - - uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ - - uint32_t low_power_enable; /*!< Enable or disable the low power mode. */ - - uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ - - uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ -}USB_OTG_CfgTypeDef; - -typedef struct -{ - uint8_t num; /*!< Endpoint number - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t is_in; /*!< Endpoint direction - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t is_stall; /*!< Endpoint stall condition - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t type; /*!< Endpoint type - This parameter can be any value of @ref USB_EP_Type_ */ - - uint8_t data_pid_start; /*!< Initial data PID - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t even_odd_frame; /*!< IFrame parity - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint16_t tx_fifo_num; /*!< Transmission FIFO number - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t maxpacket; /*!< Endpoint Max packet size - This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ - - uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ - - uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ - - uint32_t xfer_len; /*!< Current transfer length */ - - uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ -}USB_OTG_EPTypeDef; - -typedef struct -{ - uint8_t dev_addr ; /*!< USB device address. - This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ - - uint8_t ch_num; /*!< Host channel number. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t ep_num; /*!< Endpoint number. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t ep_is_in; /*!< Endpoint direction - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t speed; /*!< USB Host speed. - This parameter can be any value of @ref USB_Core_Speed_ */ - - uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ - - uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */ - - uint8_t ep_type; /*!< Endpoint Type. - This parameter can be any value of @ref USB_EP_Type_ */ - - uint16_t max_packet; /*!< Endpoint Max packet size. - This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ - - uint8_t data_pid; /*!< Initial data PID. - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ - - uint32_t xfer_len; /*!< Current transfer length. */ - - uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ - - uint8_t toggle_in; /*!< IN transfer current toggle flag. - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t toggle_out; /*!< OUT transfer current toggle flag - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ - - uint32_t ErrCnt; /*!< Host channel error count.*/ - - USB_OTG_URBStateTypeDef urb_state; /*!< URB state. - This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ - - USB_OTG_HCStateTypeDef state; /*!< Host Channel state. - This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ -}USB_OTG_HCTypeDef; -#endif /* USB_OTG_FS */ - -#if defined (USB) -/** - * @brief USB Initialization Structure definition - */ -typedef struct -{ - uint32_t dev_endpoints; /*!< Device Endpoints number. - This parameter depends on the used USB core. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t speed; /*!< USB Core speed. - This parameter can be any value of @ref USB_Core_Speed */ - - uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. - This parameter can be any value of @ref USB_EP0_MPS */ - - uint32_t phy_itface; /*!< Select the used PHY interface. - This parameter can be any value of @ref USB_Core_PHY */ - - uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ - - uint32_t low_power_enable; /*!< Enable or disable Low Power mode */ - - uint32_t lpm_enable; /*!< Enable or disable Battery charging. */ - - uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ -} USB_CfgTypeDef; - -typedef struct -{ - uint8_t num; /*!< Endpoint number - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t is_in; /*!< Endpoint direction - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t is_stall; /*!< Endpoint stall condition - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t type; /*!< Endpoint type - This parameter can be any value of @ref USB_EP_Type */ - - uint16_t pmaadress; /*!< PMA Address - This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ - - uint16_t pmaaddr0; /*!< PMA Address0 - This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ - - uint16_t pmaaddr1; /*!< PMA Address1 - This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ - - uint8_t doublebuffer; /*!< Double buffer enable - This parameter can be 0 or 1 */ - - uint16_t tx_fifo_num; /*!< This parameter is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral - This parameter is added to ensure compatibility across USB peripherals */ - - uint32_t maxpacket; /*!< Endpoint Max packet size - This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ - - uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ - - uint32_t xfer_len; /*!< Current transfer length */ - - uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ - -} USB_EPTypeDef; -#endif /* USB */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup USB_LL_Exported_Constants USB Low Layer Exported Constants - * @{ - */ -#if defined (USB_OTG_FS) -/** @defgroup USB_LL_Core_Mode USB Low Layer Core Mode - * @{ - */ -#define USB_OTG_MODE_DEVICE 0 -#define USB_OTG_MODE_HOST 1 -#define USB_OTG_MODE_DRD 2 -/** - * @} - */ - -/** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed - * @{ - */ -#define USB_OTG_SPEED_LOW 2 -#define USB_OTG_SPEED_FULL 3 - -/** - * @} - */ - -/** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY - * @{ - */ -#define USB_OTG_ULPI_PHY 1 -#define USB_OTG_EMBEDDED_PHY 2 -/** - * @} - */ - -/** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS - * @{ - */ -#define USB_OTG_FS_MAX_PACKET_SIZE 64 -#define USB_OTG_MAX_EP0_SIZE 64 -/** - * @} - */ - -/** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency - * @{ - */ -#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1 << 1) -#define DSTS_ENUMSPD_LS_PHY_6MHZ (2 << 1) -#define DSTS_ENUMSPD_FS_PHY_48MHZ (3 << 1) -/** - * @} - */ - -/** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval - * @{ - */ -#define DCFG_FRAME_INTERVAL_80 0 -#define DCFG_FRAME_INTERVAL_85 1 -#define DCFG_FRAME_INTERVAL_90 2 -#define DCFG_FRAME_INTERVAL_95 3 -/** - * @} - */ - -/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS - * @{ - */ -#define DEP0CTL_MPS_64 0 -#define DEP0CTL_MPS_32 1 -#define DEP0CTL_MPS_16 2 -#define DEP0CTL_MPS_8 3 -/** - * @} - */ - -/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed - * @{ - */ -#define EP_SPEED_LOW 0 -#define EP_SPEED_FULL 1 -#define EP_SPEED_HIGH 2 -/** - * @} - */ - -/** @defgroup USB_LL_EP_Type USB Low Layer EP Type - * @{ - */ -#define EP_TYPE_CTRL 0 -#define EP_TYPE_ISOC 1 -#define EP_TYPE_BULK 2 -#define EP_TYPE_INTR 3 -#define EP_TYPE_MSK 3 -/** - * @} - */ - -/** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines - * @{ - */ -#define STS_GOUT_NAK 1 -#define STS_DATA_UPDT 2 -#define STS_XFER_COMP 3 -#define STS_SETUP_COMP 4 -#define STS_SETUP_UPDT 6 -/** - * @} - */ - -/** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines - * @{ - */ -#define HCFG_30_60_MHZ 0 -#define HCFG_48_MHZ 1 -#define HCFG_6_MHZ 2 -/** - * @} - */ - -/** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines - * @{ - */ -#define HPRT0_PRTSPD_HIGH_SPEED 0 -#define HPRT0_PRTSPD_FULL_SPEED 1 -#define HPRT0_PRTSPD_LOW_SPEED 2 -/** - * @} - */ - -#define HCCHAR_CTRL 0 -#define HCCHAR_ISOC 1 -#define HCCHAR_BULK 2 -#define HCCHAR_INTR 3 - -#define HC_PID_DATA0 0 -#define HC_PID_DATA2 1 -#define HC_PID_DATA1 2 -#define HC_PID_SETUP 3 - -#define GRXSTS_PKTSTS_IN 2 -#define GRXSTS_PKTSTS_IN_XFER_COMP 3 -#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5 -#define GRXSTS_PKTSTS_CH_HALTED 7 - -#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE) -#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE) - -#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE)) -#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE)) -#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE)) -#define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE) - -#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE)) -#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE)) -#endif /* USB_OTG_FS */ - -#if defined (USB) -/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS - * @{ - */ -#define DEP0CTL_MPS_64 0 -#define DEP0CTL_MPS_32 1 -#define DEP0CTL_MPS_16 2 -#define DEP0CTL_MPS_8 3 -/** - * @} - */ - -/** @defgroup USB_LL_EP_Type USB Low Layer EP Type - * @{ - */ -#define EP_TYPE_CTRL 0 -#define EP_TYPE_ISOC 1 -#define EP_TYPE_BULK 2 -#define EP_TYPE_INTR 3 -#define EP_TYPE_MSK 3 -/** - * @} - */ - -#define BTABLE_ADDRESS (0x000) -#endif /* USB */ -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros - * @{ - */ -#if defined (USB_OTG_FS) -#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) -#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) - -#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) -#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) -#endif /* USB_OTG_FS */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions - * @{ - */ -/** @addtogroup USB_LL_Exported_Functions_Group1 Peripheral Control functions - * @{ - */ -#if defined (USB_OTG_FS) -HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init); -HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init); -HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_ModeTypeDef mode); -HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed); -HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num ); -HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len); -void * USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); -HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address); -HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup); -uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum); -uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum); -void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); - -HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); -HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq); -HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state); -uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, - uint8_t ch_num, - uint8_t epnum, - uint8_t dev_address, - uint8_t speed, - uint8_t ep_type, - uint16_t mps); -HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc); -uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num); -HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num); -HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); -#endif /* USB_OTG_FS */ - -#if defined (USB) -HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef Init); -HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef Init); -HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx); -HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx); -HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx , USB_ModeTypeDef mode); -HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx , uint8_t speed); -HAL_StatusTypeDef USB_FlushRxFifo (USB_TypeDef *USBx); -HAL_StatusTypeDef USB_FlushTxFifo (USB_TypeDef *USBx, uint32_t num ); -HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); -HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx , USB_EPTypeDef *ep); -HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len); -void * USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len); -HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx , USB_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx , USB_EPTypeDef *ep); -HAL_StatusTypeDef USB_SetDevAddress (USB_TypeDef *USBx, uint8_t address); -HAL_StatusTypeDef USB_DevConnect (USB_TypeDef *USBx); -HAL_StatusTypeDef USB_DevDisconnect (USB_TypeDef *USBx); -HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx); -HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup); -uint32_t USB_ReadInterrupts (USB_TypeDef *USBx); -uint32_t USB_ReadDevAllOutEpInterrupt (USB_TypeDef *USBx); -uint32_t USB_ReadDevOutEPInterrupt (USB_TypeDef *USBx , uint8_t epnum); -uint32_t USB_ReadDevAllInEpInterrupt (USB_TypeDef *USBx); -uint32_t USB_ReadDevInEPInterrupt (USB_TypeDef *USBx , uint8_t epnum); -void USB_ClearInterrupts (USB_TypeDef *USBx, uint32_t interrupt); - -HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx); -HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx); -void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes); -void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes); -#endif /* USB */ -/** - * @} - */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F102x6 || STM32F102xB || */ - /* STM32F103x6 || STM32F103xB || */ - /* STM32F103xE || STM32F103xG || */ - /* STM32F105xC || STM32F107xC */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F1xx_LL_USB_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c deleted file mode 100644 index 19a4699..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c +++ /dev/null @@ -1,526 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief HAL module driver. - * This is the common part of the HAL initialization - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The common HAL driver contains a set of generic and common APIs that can be - used by the PPP peripheral drivers and the user to start using the HAL. - [..] - The HAL contains two APIs' categories: - (+) Common HAL APIs - (+) Services HAL APIs - - @endverbatim - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup HAL HAL - * @brief HAL module driver. - * @{ - */ - -#ifdef HAL_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/** @defgroup HAL_Private_Constants HAL Private Constants - * @{ - */ - -/** - * @brief STM32F1xx HAL Driver version number - */ -#define __STM32F1xx_HAL_VERSION_MAIN (0x01) /*!< [31:24] main version */ -#define __STM32F1xx_HAL_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */ -#define __STM32F1xx_HAL_VERSION_SUB2 (0x04) /*!< [15:8] sub2 version */ -#define __STM32F1xx_HAL_VERSION_RC (0x00) /*!< [7:0] release candidate */ -#define __STM32F1xx_HAL_VERSION ((__STM32F1xx_HAL_VERSION_MAIN << 24)\ - |(__STM32F1xx_HAL_VERSION_SUB1 << 16)\ - |(__STM32F1xx_HAL_VERSION_SUB2 << 8 )\ - |(__STM32F1xx_HAL_VERSION_RC)) - -#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF) - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ - -/** @defgroup HAL_Private_Variables HAL Private Variables - * @{ - */ - -static __IO uint32_t uwTick; - -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions ---------------------------------------------------------*/ - -/** @defgroup HAL_Exported_Functions HAL Exported Functions - * @{ - */ - -/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions - * @brief Initialization and de-initialization functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initializes the Flash interface, the NVIC allocation and initial clock - configuration. It initializes the source of time base also when timeout - is needed and the backup domain when enabled. - (+) de-Initializes common part of the HAL. - (+) Configure The time base source to have 1ms time base with a dedicated - Tick interrupt priority. - (++) Systick timer is used by default as source of time base, but user - can eventually implement his proper time base source (a general purpose - timer for example or other time source), keeping in mind that Time base - duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and - handled in milliseconds basis. - (++) Time base configuration function (HAL_InitTick ()) is called automatically - at the beginning of the program after reset by HAL_Init() or at any time - when clock is configured, by HAL_RCC_ClockConfig(). - (++) Source of time base is configured to generate interrupts at regular - time intervals. Care must be taken if HAL_Delay() is called from a - peripheral ISR process, the Tick interrupt line must have higher priority - (numerically lower) than the peripheral interrupt. Otherwise the caller - ISR process will be blocked. - (++) functions affecting time base configurations are declared as __Weak - to make override possible in case of other implementations in user file. - -@endverbatim - * @{ - */ - -/** - * @brief This function configures the Flash prefetch, - * Configures time base source, NVIC and Low level hardware - * @note This function is called at the beginning of program after reset and before - * the clock configuration - * @note The time base configuration is based on MSI clock when exiting from Reset. - * Once done, time base tick start incrementing. - * In the default implementation,Systick is used as source of time base. - * The tick variable is incremented each 1ms in its ISR. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_Init(void) -{ - /* Configure Flash prefetch */ -#if (PREFETCH_ENABLE != 0) -#if defined(STM32F101x6) || defined(STM32F101xB) || defined(STM32F101xE) || defined(STM32F101xG) || \ - defined(STM32F102x6) || defined(STM32F102xB) || \ - defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || \ - defined(STM32F105xC) || defined(STM32F107xC) - - /* Prefetch buffer is not available on value line devices */ - __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); -#endif -#endif /* PREFETCH_ENABLE */ - - /* Set Interrupt Group Priority */ - HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); - - /* Use systick as time base source and configure 1ms tick (default clock after Reset is MSI) */ - HAL_InitTick(TICK_INT_PRIORITY); - - /* Init the low level hardware */ - HAL_MspInit(); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief This function de-Initializes common part of the HAL and stops the source - * of time base. - * @note This function is optional. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DeInit(void) -{ - /* Reset of all peripherals */ - __HAL_RCC_APB1_FORCE_RESET(); - __HAL_RCC_APB1_RELEASE_RESET(); - - __HAL_RCC_APB2_FORCE_RESET(); - __HAL_RCC_APB2_RELEASE_RESET(); - -#if defined(STM32F105xC) || defined(STM32F107xC) - __HAL_RCC_AHB_FORCE_RESET(); - __HAL_RCC_AHB_RELEASE_RESET(); -#endif - - /* De-Init the low level hardware */ - HAL_MspDeInit(); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Initializes the MSP. - * @retval None - */ -__weak void HAL_MspInit(void) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes the MSP. - * @retval None - */ -__weak void HAL_MspDeInit(void) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief This function configures the source of the time base. - * The time source is configured to have 1ms time base with a dedicated - * Tick interrupt priority. - * @note This function is called automatically at the beginning of program after - * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig(). - * @note In the default implementation, SysTick timer is the source of time base. - * It is used to generate interrupts at regular time intervals. - * Care must be taken if HAL_Delay() is called from a peripheral ISR process, - * The the SysTick interrupt must have higher priority (numerically lower) - * than the peripheral interrupt. Otherwise the caller ISR process will be blocked. - * The function is declared as __Weak to be overwritten in case of other - * implementation in user file. - * @param TickPriority: Tick interrupt priority. - * @retval HAL status - */ -__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) -{ - /*Configure the SysTick to have interrupt in 1ms time basis*/ - HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000); - - /*Configure the SysTick IRQ priority */ - HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority ,0); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions - * @brief HAL Control functions - * -@verbatim - =============================================================================== - ##### HAL Control functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Provide a tick value in millisecond - (+) Provide a blocking delay in millisecond - (+) Suspend the time base source interrupt - (+) Resume the time base source interrupt - (+) Get the HAL API driver version - (+) Get the device identifier - (+) Get the device revision identifier - (+) Enable/Disable Debug module during Sleep mode - (+) Enable/Disable Debug module during STOP mode - (+) Enable/Disable Debug module during STANDBY mode - -@endverbatim - * @{ - */ - -/** - * @brief This function is called to increment a global variable "uwTick" - * used as application time base. - * @note In the default implementation, this variable is incremented each 1ms - * in Systick ISR. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval None - */ -__weak void HAL_IncTick(void) -{ - uwTick++; -} - -/** - * @brief Provides a tick value in millisecond. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval tick value - */ -__weak uint32_t HAL_GetTick(void) -{ - return uwTick; -} - -/** - * @brief This function provides accurate delay (in milliseconds) based - * on variable incremented. - * @note In the default implementation , SysTick timer is the source of time base. - * It is used to generate interrupts at regular time intervals where uwTick - * is incremented. - * @note ThiS function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @param Delay: specifies the delay time length, in milliseconds. - * @retval None - */ -__weak void HAL_Delay(__IO uint32_t Delay) -{ - uint32_t tickstart = 0; - tickstart = HAL_GetTick(); - while((HAL_GetTick() - tickstart) < Delay) - { - } -} - -/** - * @brief Suspend Tick increment. - * @note In the default implementation , SysTick timer is the source of time base. It is - * used to generate interrupts at regular time intervals. Once HAL_SuspendTick() - * is called, the the SysTick interrupt will be disabled and so Tick increment - * is suspended. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval None - */ -__weak void HAL_SuspendTick(void) -{ - /* Disable SysTick Interrupt */ - CLEAR_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk); -} - -/** - * @brief Resume Tick increment. - * @note In the default implementation , SysTick timer is the source of time base. It is - * used to generate interrupts at regular time intervals. Once HAL_ResumeTick() - * is called, the the SysTick interrupt will be enabled and so Tick increment - * is resumed. - * @note This function is declared as __weak to be overwritten in case of other - * implementations in user file. - * @retval None - */ -__weak void HAL_ResumeTick(void) -{ - /* Enable SysTick Interrupt */ - SET_BIT(SysTick->CTRL,SysTick_CTRL_TICKINT_Msk); -} - -/** - * @brief This method returns the HAL revision - * @retval version: 0xXYZR (8bits for each decimal, R for RC) - */ -uint32_t HAL_GetHalVersion(void) -{ - return __STM32F1xx_HAL_VERSION; -} - -/** - * @brief Returns the device revision identifier. - * Note: On devices STM32F10xx8 and STM32F10xxB, - * STM32F101xC/D/E and STM32F103xC/D/E, - * STM32F101xF/G and STM32F103xF/G - * STM32F10xx4 and STM32F10xx6 - * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in - * debug mode (not accessible by the user software in normal mode). - * Refer to errata sheet of these devices for more details. - * @retval Device revision identifier - */ -uint32_t HAL_GetREVID(void) -{ - return((DBGMCU->IDCODE) >> POSITION_VAL(DBGMCU_IDCODE_REV_ID)); -} - -/** - * @brief Returns the device identifier. - * Note: On devices STM32F10xx8 and STM32F10xxB, - * STM32F101xC/D/E and STM32F103xC/D/E, - * STM32F101xF/G and STM32F103xF/G - * STM32F10xx4 and STM32F10xx6 - * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in - * debug mode (not accessible by the user software in normal mode). - * Refer to errata sheet of these devices for more details. - * @retval Device identifier - */ -uint32_t HAL_GetDEVID(void) -{ - return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK); -} - -/** - * @brief Enable the Debug Module during SLEEP mode - * @retval None - */ -void HAL_DBGMCU_EnableDBGSleepMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); -} - -/** - * @brief Disable the Debug Module during SLEEP mode - * Note: On devices STM32F10xx8 and STM32F10xxB, - * STM32F101xC/D/E and STM32F103xC/D/E, - * STM32F101xF/G and STM32F103xF/G - * STM32F10xx4 and STM32F10xx6 - * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in - * debug mode (not accessible by the user software in normal mode). - * Refer to errata sheet of these devices for more details. - * @retval None - */ -void HAL_DBGMCU_DisableDBGSleepMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); -} - -/** - * @brief Enable the Debug Module during STOP mode - * Note: On devices STM32F10xx8 and STM32F10xxB, - * STM32F101xC/D/E and STM32F103xC/D/E, - * STM32F101xF/G and STM32F103xF/G - * STM32F10xx4 and STM32F10xx6 - * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in - * debug mode (not accessible by the user software in normal mode). - * Refer to errata sheet of these devices for more details. - * Note: On all STM32F1 devices: - * If the system tick timer interrupt is enabled during the Stop mode - * debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup - * the system from Stop mode. - * Workaround: To debug the Stop mode, disable the system tick timer - * interrupt. - * Refer to errata sheet of these devices for more details. - * Note: On all STM32F1 devices: - * If the system tick timer interrupt is enabled during the Stop mode - * debug (DBG_STOP bit set in the DBGMCU_CR register ), it will wakeup - * the system from Stop mode. - * Workaround: To debug the Stop mode, disable the system tick timer - * interrupt. - * Refer to errata sheet of these devices for more details. - * @retval None - */ -void HAL_DBGMCU_EnableDBGStopMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); -} - -/** - * @brief Disable the Debug Module during STOP mode - * Note: On devices STM32F10xx8 and STM32F10xxB, - * STM32F101xC/D/E and STM32F103xC/D/E, - * STM32F101xF/G and STM32F103xF/G - * STM32F10xx4 and STM32F10xx6 - * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in - * debug mode (not accessible by the user software in normal mode). - * Refer to errata sheet of these devices for more details. - * @retval None - */ -void HAL_DBGMCU_DisableDBGStopMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); -} - -/** - * @brief Enable the Debug Module during STANDBY mode - * Note: On devices STM32F10xx8 and STM32F10xxB, - * STM32F101xC/D/E and STM32F103xC/D/E, - * STM32F101xF/G and STM32F103xF/G - * STM32F10xx4 and STM32F10xx6 - * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in - * debug mode (not accessible by the user software in normal mode). - * Refer to errata sheet of these devices for more details. - * @retval None - */ -void HAL_DBGMCU_EnableDBGStandbyMode(void) -{ - SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); -} - -/** - * @brief Disable the Debug Module during STANDBY mode - * Note: On devices STM32F10xx8 and STM32F10xxB, - * STM32F101xC/D/E and STM32F103xC/D/E, - * STM32F101xF/G and STM32F103xF/G - * STM32F10xx4 and STM32F10xx6 - * Debug registers DBGMCU_IDCODE and DBGMCU_CR are accessible only in - * debug mode (not accessible by the user software in normal mode). - * Refer to errata sheet of these devices for more details. - * @retval None - */ -void HAL_DBGMCU_DisableDBGStandbyMode(void) -{ - CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c deleted file mode 100644 index 836503c..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c +++ /dev/null @@ -1,494 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_cortex.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief CORTEX HAL module driver. - * - * This file provides firmware functions to manage the following - * functionalities of the CORTEX: - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - * @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - - [..] - *** How to configure Interrupts using Cortex HAL driver *** - =========================================================== - [..] - This section provide functions allowing to configure the NVIC interrupts (IRQ). - The Cortex-M3 exceptions are managed by CMSIS functions. - - (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping() - function according to the following table. - - The table below gives the allowed values of the pre-emption priority and subpriority according - to the Priority Grouping configuration performed by HAL_NVIC_SetPriorityGrouping() function. - ========================================================================================================================== - NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description - ========================================================================================================================== - NVIC_PRIORITYGROUP_0 | 0 | 0-15 | 0 bits for pre-emption priority - | | | 4 bits for subpriority - -------------------------------------------------------------------------------------------------------------------------- - NVIC_PRIORITYGROUP_1 | 0-1 | 0-7 | 1 bits for pre-emption priority - | | | 3 bits for subpriority - -------------------------------------------------------------------------------------------------------------------------- - NVIC_PRIORITYGROUP_2 | 0-3 | 0-3 | 2 bits for pre-emption priority - | | | 2 bits for subpriority - -------------------------------------------------------------------------------------------------------------------------- - NVIC_PRIORITYGROUP_3 | 0-7 | 0-1 | 3 bits for pre-emption priority - | | | 1 bits for subpriority - -------------------------------------------------------------------------------------------------------------------------- - NVIC_PRIORITYGROUP_4 | 0-15 | 0 | 4 bits for pre-emption priority - | | | 0 bits for subpriority - ========================================================================================================================== - (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority() - - (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ() - - - -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ pre-emption is no more possible. - The pending IRQ priority will be managed only by the sub priority. - - -@- IRQ priority order (sorted by highest to lowest priority): - (+@) Lowest pre-emption priority - (+@) Lowest sub priority - (+@) Lowest hardware priority (IRQ number) - - [..] - *** How to configure Systick using Cortex HAL driver *** - ======================================================== - [..] - Setup SysTick Timer for 1 msec interrupts. - - (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which - is a CMSIS function that: - (++) Configures the SysTick Reload register with value passed as function parameter. - (++) Configures the SysTick IRQ priority to the lowest value (0x0F). - (++) Resets the SysTick Counter register. - (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK). - (++) Enables the SysTick Interrupt. - (++) Starts the SysTick Counter. - - (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the function - HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the - HAL_SYSTICK_Config() function call. - - (+) You can change the SysTick IRQ priority by calling the - HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function - call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function. - - (+) To adjust the SysTick time base, use the following formula: - - Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s) - (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function - (++) Reload Value should not exceed 0xFFFFFF - - @endverbatim - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup CORTEX CORTEX - * @brief CORTEX HAL module driver - * @{ - */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions - * @{ - */ - - -/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - ============================================================================== - ##### Initialization and de-initialization functions ##### - ============================================================================== - [..] - This section provide the Cortex HAL driver functions allowing to configure Interrupts - Systick functionalities - -@endverbatim - * @{ - */ - - -/** - * @brief Sets the priority grouping field (pre-emption priority and subpriority) - * using the required unlock sequence. - * @param PriorityGroup: The priority grouping bits length. - * This parameter can be one of the following values: - * @arg NVIC_PRIORITYGROUP_0: 0 bits for pre-emption priority - * 4 bits for subpriority - * @arg NVIC_PRIORITYGROUP_1: 1 bits for pre-emption priority - * 3 bits for subpriority - * @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority - * 2 bits for subpriority - * @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority - * 1 bits for subpriority - * @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority - * 0 bits for subpriority - * @note When the NVIC_PriorityGroup_0 is selected, IRQ pre-emption is no more possible. - * The pending IRQ priority will be managed only by the subpriority. - * @retval None - */ -void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - /* Check the parameters */ - assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); - - /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */ - NVIC_SetPriorityGrouping(PriorityGroup); -} - -/** - * @brief Sets the priority of an interrupt. - * @param IRQn: External interrupt number - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) - * @param PreemptPriority: The pre-emption priority for the IRQn channel. - * This parameter can be a value between 0 and 15 - * A lower priority value indicates a higher priority - * @param SubPriority: the subpriority level for the IRQ channel. - * This parameter can be a value between 0 and 15 - * A lower priority value indicates a higher priority. - * @retval None - */ -void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t prioritygroup = 0x00; - - /* Check the parameters */ - assert_param(IS_NVIC_SUB_PRIORITY(SubPriority)); - assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority)); - - prioritygroup = NVIC_GetPriorityGrouping(); - - NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority)); -} - -/** - * @brief Enables a device specific interrupt in the NVIC interrupt controller. - * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig() - * function should be called before. - * @param IRQn External interrupt number - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) - * @retval None - */ -void HAL_NVIC_EnableIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - /* Enable interrupt */ - NVIC_EnableIRQ(IRQn); -} - -/** - * @brief Disables a device specific interrupt in the NVIC interrupt controller. - * @param IRQn External interrupt number - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) - * @retval None - */ -void HAL_NVIC_DisableIRQ(IRQn_Type IRQn) -{ - /* Check the parameters */ - assert_param(IS_NVIC_DEVICE_IRQ(IRQn)); - - - /* Disable interrupt */ - NVIC_DisableIRQ(IRQn); -} - -/** - * @brief Initiates a system reset request to reset the MCU. - * @retval None - */ -void HAL_NVIC_SystemReset(void) -{ - /* System Reset */ - NVIC_SystemReset(); -} - -/** - * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer. - * Counter is in free running mode to generate periodic interrupts. - * @param TicksNumb: Specifies the ticks Number of ticks between two interrupts. - * @retval status: - 0 Function succeeded. - * - 1 Function failed. - */ -uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb) -{ - return SysTick_Config(TicksNumb); -} -/** - * @} - */ - -/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions - * @brief Cortex control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control the CORTEX - (NVIC, SYSTICK, MPU) functionalities. - - -@endverbatim - * @{ - */ - -#if (__MPU_PRESENT == 1) -/** - * @brief Initializes and configures the Region and the memory to be protected. - * @param MPU_Init: Pointer to a MPU_Region_InitTypeDef structure that contains - * the initialization and configuration information. - * @retval None - */ -void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init) -{ - /* Check the parameters */ - assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number)); - assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable)); - - /* Set the Region number */ - MPU->RNR = MPU_Init->Number; - - if ((MPU_Init->Enable) != RESET) - { - /* Check the parameters */ - assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec)); - assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission)); - assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField)); - assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable)); - assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable)); - assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable)); - assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable)); - assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size)); - - MPU->RBAR = MPU_Init->BaseAddress; - MPU->RASR = ((uint32_t)MPU_Init->DisableExec << MPU_RASR_XN_Pos) | - ((uint32_t)MPU_Init->AccessPermission << MPU_RASR_AP_Pos) | - ((uint32_t)MPU_Init->TypeExtField << MPU_RASR_TEX_Pos) | - ((uint32_t)MPU_Init->IsShareable << MPU_RASR_S_Pos) | - ((uint32_t)MPU_Init->IsCacheable << MPU_RASR_C_Pos) | - ((uint32_t)MPU_Init->IsBufferable << MPU_RASR_B_Pos) | - ((uint32_t)MPU_Init->SubRegionDisable << MPU_RASR_SRD_Pos) | - ((uint32_t)MPU_Init->Size << MPU_RASR_SIZE_Pos) | - ((uint32_t)MPU_Init->Enable << MPU_RASR_ENABLE_Pos); - } - else - { - MPU->RBAR = 0x00; - MPU->RASR = 0x00; - } -} -#endif /* __MPU_PRESENT */ - -/** - * @brief Gets the priority grouping field from the NVIC Interrupt Controller. - * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field) - */ -uint32_t HAL_NVIC_GetPriorityGrouping(void) -{ - /* Get the PRIGROUP[10:8] field value */ - return NVIC_GetPriorityGrouping(); -} - -/** - * @brief Gets the priority of an interrupt. - * @param IRQn: External interrupt number - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) - * @param PriorityGroup: the priority grouping bits length. - * This parameter can be one of the following values: - * @arg NVIC_PRIORITYGROUP_0: 0 bits for pre-emption priority - * 4 bits for subpriority - * @arg NVIC_PRIORITYGROUP_1: 1 bits for pre-emption priority - * 3 bits for subpriority - * @arg NVIC_PRIORITYGROUP_2: 2 bits for pre-emption priority - * 2 bits for subpriority - * @arg NVIC_PRIORITYGROUP_3: 3 bits for pre-emption priority - * 1 bits for subpriority - * @arg NVIC_PRIORITYGROUP_4: 4 bits for pre-emption priority - * 0 bits for subpriority - * @param pPreemptPriority: Pointer on the Preemptive priority value (starting from 0). - * @param pSubPriority: Pointer on the Subpriority value (starting from 0). - * @retval None - */ -void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) -{ - /* Check the parameters */ - assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup)); - /* Get priority for Cortex-M system or device specific interrupts */ - NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority); -} - -/** - * @brief Sets Pending bit of an external interrupt. - * @param IRQn External interrupt number - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) - * @retval None - */ -void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - /* Set interrupt pending */ - NVIC_SetPendingIRQ(IRQn); -} - -/** - * @brief Gets Pending Interrupt (reads the pending register in the NVIC - * and returns the pending bit for the specified interrupt). - * @param IRQn External interrupt number - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) - * @retval status: - 0 Interrupt status is not pending. - * - 1 Interrupt status is pending. - */ -uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - /* Return 1 if pending else 0 */ - return NVIC_GetPendingIRQ(IRQn); -} - -/** - * @brief Clears the pending bit of an external interrupt. - * @param IRQn External interrupt number - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) - * @retval None - */ -void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - /* Clear pending interrupt */ - NVIC_ClearPendingIRQ(IRQn); -} - -/** - * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit). - * @param IRQn External interrupt number - * This parameter can be an enumerator of IRQn_Type enumeration - * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f10xxx.h)) - * @retval status: - 0 Interrupt status is not pending. - * - 1 Interrupt status is pending. - */ -uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn) -{ - /* Return 1 if active else 0 */ - return NVIC_GetActive(IRQn); -} - -/** - * @brief Configures the SysTick clock source. - * @param CLKSource: specifies the SysTick clock source. - * This parameter can be one of the following values: - * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. - * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. - * @retval None - */ -void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource) -{ - /* Check the parameters */ - assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource)); - if (CLKSource == SYSTICK_CLKSOURCE_HCLK) - { - SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; - } - else - { - SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; - } -} - -/** - * @brief This function handles SYSTICK interrupt request. - * @retval None - */ -void HAL_SYSTICK_IRQHandler(void) -{ - HAL_SYSTICK_Callback(); -} - -/** - * @brief SYSTICK callback. - * @retval None - */ -__weak void HAL_SYSTICK_Callback(void) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_SYSTICK_Callback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_CORTEX_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c deleted file mode 100644 index a249c81..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c +++ /dev/null @@ -1,709 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_dma.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief DMA HAL module driver. - * - * This file provides firmware functions to manage the following - * functionalities of the Direct Memory Access (DMA) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral State and errors functions - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Enable and configure the peripheral to be connected to the DMA Channel - (except for internal SRAM / FLASH memories: no initialization is - necessary) please refer to Reference manual for connection between peripherals - and DMA requests. - - (#) For a given Channel, program the required configuration through the following parameters: - Transfer Direction, Source and Destination data formats, - Circular or Normal mode, Channel Priority level, Source and Destination Increment mode, - using HAL_DMA_Init() function. - - (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error - detection. - - (#) Use HAL_DMA_Abort() function to abort the current transfer - - -@- In Memory-to-Memory transfer mode, Circular mode is not allowed. - *** Polling mode IO operation *** - ================================= - [..] - (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source - address and destination address and the Length of data to be transferred - (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this - case a fixed Timeout can be configured by User depending from his application. - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority() - (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() - (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of - Source address and destination address and the Length of data to be transferred. - In this case the DMA interrupt is configured - (+) Use HAL_DMAy_Channelx_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine - (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can - add his own function by customization of function pointer XferCpltCallback and - XferErrorCallback (i.e a member of DMA handle structure). - - *** DMA HAL driver macros list *** - ============================================= - [..] - Below the list of most used macros in DMA HAL driver. - - (+) __HAL_DMA_ENABLE: Enable the specified DMA Channel. - (+) __HAL_DMA_DISABLE: Disable the specified DMA Channel. - (+) __HAL_DMA_GET_FLAG: Get the DMA Channel pending flags. - (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Channel pending flags. - (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Channel interrupts. - (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Channel interrupts. - (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Channel interrupt has occurred or not. - - [..] - (@) You can refer to the DMA HAL driver header file for more useful macros - - @endverbatim - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup DMA DMA - * @brief DMA HAL module driver - * @{ - */ - -#ifdef HAL_DMA_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup DMA_Private_Constants DMA Private Constants - * @{ - */ -#define HAL_TIMEOUT_DMA_ABORT ((uint32_t)1000) /* 1s */ -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup DMA_Private_Functions DMA Private Functions - * @{ - */ -static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Functions DMA Exported Functions - * @{ - */ - -/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and de-initialization functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to initialize the DMA Channel source - and destination addresses, incrementation and data sizes, transfer direction, - circular/normal mode selection, memory-to-memory mode selection and Channel priority value. - [..] - The HAL_DMA_Init() function follows the DMA configuration procedures as described in - reference manual. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the DMA according to the specified - * parameters in the DMA_InitTypeDef and create the associated handle. - * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma) -{ - uint32_t tmp = 0; - - /* Check the DMA handle allocation */ - if(hdma == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); - assert_param(IS_DMA_DIRECTION(hdma->Init.Direction)); - assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc)); - assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc)); - assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment)); - assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment)); - assert_param(IS_DMA_MODE(hdma->Init.Mode)); - assert_param(IS_DMA_PRIORITY(hdma->Init.Priority)); - - if(hdma->State == HAL_DMA_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hdma->Lock = HAL_UNLOCKED; - } - - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Get the CR register value */ - tmp = hdma->Instance->CCR; - - /* Clear PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR bits */ - tmp &= ((uint32_t)~(DMA_CCR_PL | DMA_CCR_MSIZE | DMA_CCR_PSIZE | \ - DMA_CCR_MINC | DMA_CCR_PINC | DMA_CCR_CIRC | \ - DMA_CCR_DIR)); - - /* Prepare the DMA Channel configuration */ - tmp |= hdma->Init.Direction | - hdma->Init.PeriphInc | hdma->Init.MemInc | - hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment | - hdma->Init.Mode | hdma->Init.Priority; - - /* Write to DMA Channel CR register */ - hdma->Instance->CCR = tmp; - - /* Initialise the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Initialize the DMA state*/ - hdma->State = HAL_DMA_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the DMA peripheral - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma) -{ - /* Check the DMA handle allocation */ - if(hdma == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_DMA_ALL_INSTANCE(hdma->Instance)); - - /* Check the DMA peripheral state */ - if(hdma->State == HAL_DMA_STATE_BUSY) - { - return HAL_ERROR; - } - - /* Disable the selected DMA Channelx */ - __HAL_DMA_DISABLE(hdma); - - /* Reset DMA Channel control register */ - hdma->Instance->CCR = 0; - - /* Reset DMA Channel Number of Data to Transfer register */ - hdma->Instance->CNDTR = 0; - - /* Reset DMA Channel peripheral address register */ - hdma->Instance->CPAR = 0; - - /* Reset DMA Channel memory address register */ - hdma->Instance->CMAR = 0; - - /* Clear all flags */ - __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)); - __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)); - - /* Initialize the error code */ - hdma->ErrorCode = HAL_DMA_ERROR_NONE; - - /* Initialize the DMA state */ - hdma->State = HAL_DMA_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(hdma); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup DMA_Exported_Functions_Group2 Input and Output operation functions - * @brief I/O operation functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Configure the source, destination address and data length and Start DMA transfer - (+) Configure the source, destination address and data length and - Start DMA transfer with interrupt - (+) Abort DMA transfer - (+) Poll for transfer complete - (+) Handle DMA interrupt request - -@endverbatim - * @{ - */ - -/** - * @brief Starts the DMA Transfer. - * @param hdma : pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @param SrcAddress: The source memory Buffer address - * @param DstAddress: The destination memory Buffer address - * @param DataLength: The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - /* Process locked */ - __HAL_LOCK(hdma); - - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Disable the peripheral */ - __HAL_DMA_DISABLE(hdma); - - /* Configure the source, destination address and the data length */ - DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Enable the Peripheral */ - __HAL_DMA_ENABLE(hdma); - - return HAL_OK; -} - -/** - * @brief Start the DMA Transfer with interrupt enabled. - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @param SrcAddress: The source memory Buffer address - * @param DstAddress: The destination memory Buffer address - * @param DataLength: The length of data to be transferred from source to destination - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - /* Process locked */ - __HAL_LOCK(hdma); - - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_BUSY; - - /* Check the parameters */ - assert_param(IS_DMA_BUFFER_SIZE(DataLength)); - - /* Disable the peripheral */ - __HAL_DMA_DISABLE(hdma); - - /* Configure the source, destination address and the data length */ - DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength); - - /* Enable the transfer complete interrupt */ - __HAL_DMA_ENABLE_IT(hdma, DMA_IT_TC); - - /* Enable the Half transfer complete interrupt */ - __HAL_DMA_ENABLE_IT(hdma, DMA_IT_HT); - - /* Enable the transfer Error interrupt */ - __HAL_DMA_ENABLE_IT(hdma, DMA_IT_TE); - - /* Enable the Peripheral */ - __HAL_DMA_ENABLE(hdma); - - return HAL_OK; -} - -/** - * @brief Aborts the DMA Transfer. - * @param hdma : pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * - * @note After disabling a DMA Channel, a check for wait until the DMA Channel is - * effectively disabled is added. If a Channel is disabled - * while a data transfer is ongoing, the current data will be transferred - * and the Channel will be effectively disabled only after the transfer of - * this single data is finished. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma) -{ - uint32_t tickstart = 0x00; - - /* Disable the channel */ - __HAL_DMA_DISABLE(hdma); - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Check if the DMA Channel is effectively disabled */ - while((hdma->Instance->CCR & DMA_CCR_EN) != 0) - { - /* Check for the Timeout */ - if((HAL_GetTick() - tickstart) > HAL_TIMEOUT_DMA_ABORT) - { - /* Update error code */ - SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TIMEOUT); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_TIMEOUT; - } - } - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_OK; -} - -/** - * @brief Polling for transfer complete. - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @param CompleteLevel: Specifies the DMA level complete. - * @param Timeout: Timeout duration. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout) -{ - uint32_t temp; - uint32_t tickstart = 0x00; - - /* Get the level transfer complete flag */ - if(CompleteLevel == HAL_DMA_FULL_TRANSFER) - { - /* Transfer Complete flag */ - temp = __HAL_DMA_GET_TC_FLAG_INDEX(hdma); - } - else - { - /* Half Transfer Complete flag */ - temp = __HAL_DMA_GET_HT_FLAG_INDEX(hdma); - } - - /* Get tick */ - tickstart = HAL_GetTick(); - - while(__HAL_DMA_GET_FLAG(hdma, temp) == RESET) - { - if((__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)) != RESET)) - { - /* Clear the transfer error flags */ - __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)); - - /* Update error code */ - SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TE); - - /* Change the DMA state */ - hdma->State= HAL_DMA_STATE_ERROR; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_ERROR; - } - /* Check for the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout)) - { - /* Update error code */ - SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TIMEOUT); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_TIMEOUT; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_TIMEOUT; - } - } - } - - if(CompleteLevel == HAL_DMA_FULL_TRANSFER) - { - /* Clear the transfer complete flag */ - __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)); - - /* The selected Channelx EN bit is cleared (DMA is disabled and - all transfers are complete) */ - hdma->State = HAL_DMA_STATE_READY; - - } - else - { - /* Clear the half transfer complete flag */ - __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)); - - /* The selected Channelx EN bit is cleared (DMA is disabled and - all transfers of half buffer are complete) */ - hdma->State = HAL_DMA_STATE_READY_HALF; - } - - /* Process unlocked */ - __HAL_UNLOCK(hdma); - - return HAL_OK; -} - -/** - * @brief Handles DMA interrupt request. - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @retval None - */ -void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma) -{ - /* Transfer Error Interrupt management ***************************************/ - if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET) - { - /* Disable the transfer error interrupt */ - __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE); - - /* Clear the transfer error flag */ - __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)); - - /* Update error code */ - SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TE); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_ERROR; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - if (hdma->XferErrorCallback != NULL) - { - /* Transfer error callback */ - hdma->XferErrorCallback(hdma); - } - } - } - - /* Half Transfer Complete Interrupt management ******************************/ - if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET) - { - /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */ - if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0) - { - /* Disable the half transfer interrupt */ - __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT); - } - /* Clear the half transfer complete flag */ - __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)); - - /* Change DMA peripheral state */ - hdma->State = HAL_DMA_STATE_READY_HALF; - - if(hdma->XferHalfCpltCallback != NULL) - { - /* Half transfer callback */ - hdma->XferHalfCpltCallback(hdma); - } - } - } - - /* Transfer Complete Interrupt management ***********************************/ - if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)) != RESET) - { - if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET) - { - if((hdma->Instance->CCR & DMA_CCR_CIRC) == 0) - { - /* Disable the transfer complete interrupt */ - __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TC); - } - /* Clear the transfer complete flag */ - __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)); - - /* Update error code */ - SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_NONE); - - /* Change the DMA state */ - hdma->State = HAL_DMA_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hdma); - - if(hdma->XferCpltCallback != NULL) - { - /* Transfer complete callback */ - hdma->XferCpltCallback(hdma); - } - } - } -} - -/** - * @} - */ - -/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions - * @brief Peripheral State functions - * -@verbatim - =============================================================================== - ##### State and Errors functions ##### - =============================================================================== - [..] - This subsection provides functions allowing to - (+) Check the DMA state - (+) Get error code - -@endverbatim - * @{ - */ - -/** - * @brief Returns the DMA state. - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @retval HAL state - */ -HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma) -{ - return hdma->State; -} - -/** - * @brief Return the DMA error code - * @param hdma : pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @retval DMA Error Code - */ -uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma) -{ - return hdma->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup DMA_Private_Functions DMA Private Functions - * @{ - */ - -/** - * @brief Sets the DMA Transfer parameter. - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA Channel. - * @param SrcAddress: The source memory Buffer address - * @param DstAddress: The destination memory Buffer address - * @param DataLength: The length of data to be transferred from source to destination - * @retval HAL status - */ -static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength) -{ - /* Configure DMA Channel data length */ - hdma->Instance->CNDTR = DataLength; - - /* Peripheral to Memory */ - if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH) - { - /* Configure DMA Channel destination address */ - hdma->Instance->CPAR = DstAddress; - - /* Configure DMA Channel source address */ - hdma->Instance->CMAR = SrcAddress; - } - /* Memory to Peripheral */ - else - { - /* Configure DMA Channel source address */ - hdma->Instance->CPAR = SrcAddress; - - /* Configure DMA Channel destination address */ - hdma->Instance->CMAR = DstAddress; - } -} - -/** - * @} - */ - -#endif /* HAL_DMA_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c deleted file mode 100644 index b59e08c..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c +++ /dev/null @@ -1,974 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_flash.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief FLASH HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the internal FLASH memory: - * + Program operations functions - * + Memory Control functions - * + Peripheral State functions - * - @verbatim - ============================================================================== - ##### FLASH peripheral features ##### - ============================================================================== - [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses - to the Flash memory. It implements the erase and program Flash memory operations - and the read and write protection mechanisms. - - [..] The Flash memory interface accelerates code execution with a system of instruction - prefetch. - - [..] The FLASH main features are: - (+) Flash memory read operations - (+) Flash memory program/erase operations - (+) Read / write protections - (+) Prefetch on I-Code - (+) Option Bytes programming - - - ##### How to use this driver ##### - ============================================================================== - [..] - This driver provides functions and macros to configure and program the FLASH - memory of all STM32F1xx devices. - - (#) FLASH Memory I/O Programming functions: this group includes all needed - functions to erase and program the main memory: - (++) Lock and Unlock the FLASH interface - (++) Erase function: Erase page, erase all pages - (++) Program functions: half word, word and doubleword - - (#) FLASH Option Bytes Programming functions: this group includes all needed - functions to manage the Option Bytes: - (++) Lock and Unlock the Option Bytes - (++) Set/Reset the write protection - (++) Set the Read protection Level - (++) Program the user Option Bytes - (++) Launch the Option Bytes loader - (++) Erase Option Bytes - (++) Program the data Option Bytes - (++) Get the Write protection. - (++) Get the user option bytes. - - (#) Interrupts and flags management functions : this group - includes all needed functions to: - (++) Handle FLASH interrupts - (++) Wait for last FLASH operation according to its status - (++) Get error flag status - - [..] In addition to these function, this driver includes a set of macros allowing - to handle the following operations: - - (+) Set/Get the latency - (+) Enable/Disable the prefetch buffer - (+) Enable/Disable the half cycle access - (+) Enable/Disable the FLASH interrupts - (+) Monitor the FLASH flags status - - @endverbatim - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -#ifdef HAL_FLASH_MODULE_ENABLED - -/** @defgroup FLASH FLASH - * @brief FLASH HAL module driver - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup FLASH_Private_Constants FLASH Private Constants - * @{ - */ -/** - * @} - */ - -/* Private macro ---------------------------- ---------------------------------*/ -/** @defgroup FLASH_Private_Macros FLASH Private Macros - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Variables FLASH Private Variables - * @{ - */ -/* Variables used for Erase pages under interruption*/ -FLASH_ProcessTypeDef pFlash; -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup FLASH_Private_Functions FLASH Private Functions - * @{ - */ -static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data); -static void FLASH_SetErrorCode(void); -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Functions FLASH Exported Functions - * @{ - */ - -/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions - * @brief Programming operation functions - * -@verbatim -@endverbatim - * @{ - */ - -/** - * @brief Program halfword, word or double word at a specified address - * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface - * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @note FLASH should be previously erased before new programmation (only exception to this - * is when 0x0000 is programmed) - * - * @param TypeProgram: Indicate the way to program at a specified address. - * This parameter can be a value of @ref FLASH_Type_Program - * @param Address: Specifies the address to be programmed. - * @param Data: Specifies the data to be programmed - * - * @retval HAL_StatusTypeDef HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data) -{ - HAL_StatusTypeDef status = HAL_ERROR; - uint8_t index = 0; - uint8_t nbiterations = 0; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); - assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); - -#if defined(FLASH_BANK2_END) - if(Address <= FLASH_BANK1_END) - { -#endif /* FLASH_BANK2_END */ - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); -#if defined(FLASH_BANK2_END) - } - else - { - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE); - } -#endif /* FLASH_BANK2_END */ - - if(status == HAL_OK) - { - if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) - { - /* Program halfword (16-bit) at a specified address. */ - nbiterations = 1; - } - else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) - { - /* Program word (32-bit = 2*16-bit) at a specified address. */ - nbiterations = 2; - } - else - { - /* Program double word (64-bit = 4*16-bit) at a specified address. */ - nbiterations = 4; - } - - for (index = 0; index < nbiterations; index++) - { - FLASH_Program_HalfWord((Address + (2*index)), (uint16_t)(Data >> (16*index))); - -#if defined(FLASH_BANK2_END) - if(Address <= FLASH_BANK1_END) - { -#endif /* FLASH_BANK2_END */ - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the program operation is completed, disable the PG Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PG); -#if defined(FLASH_BANK2_END) - } - else - { - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the program operation is completed, disable the PG Bit */ - CLEAR_BIT(FLASH->CR2, FLASH_CR2_PG); - } -#endif /* FLASH_BANK2_END */ - /* In case of error, stop programation procedure */ - if (status != HAL_OK) - { - break; - } - } - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Program halfword, word or double word at a specified address with interrupt enabled. - * @note The function HAL_FLASH_Unlock() should be called before to unlock the FLASH interface - * The function HAL_FLASH_Lock() should be called after to lock the FLASH interface - * - * @note If an erase and a program operations are requested simultaneously, - * the erase operation is performed before the program one. - * - * @param TypeProgram: Indicate the way to program at a specified address. - * This parameter can be a value of @ref FLASH_Type_Program - * @param Address: Specifies the address to be programmed. - * @param Data: Specifies the data to be programmed - * - * @retval HAL_StatusTypeDef HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram)); - assert_param(IS_FLASH_PROGRAM_ADDRESS(Address)); - -#if defined(FLASH_BANK2_END) - /* If procedure already ongoing, reject the next one */ - if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE) - { - return HAL_ERROR; - } - - if(Address <= FLASH_BANK1_END) - { - /* Enable End of FLASH Operation and Error source interrupts */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP_BANK1 | FLASH_IT_ERR_BANK1); - - }else - { - /* Enable End of FLASH Operation and Error source interrupts */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP_BANK2 | FLASH_IT_ERR_BANK2); - } -#else - /* Enable End of FLASH Operation and Error source interrupts */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); -#endif /* FLASH_BANK2_END */ - - pFlash.Address = Address; - pFlash.Data = Data; - - if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD) - { - pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMHALFWORD; - /*Program halfword (16-bit) at a specified address.*/ - pFlash.DataRemaining = 1; - } - else if(TypeProgram == FLASH_TYPEPROGRAM_WORD) - { - pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMWORD; - /*Program word (32-bit : 2*16-bit) at a specified address.*/ - pFlash.DataRemaining = 2; - } - else - { - pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAMDOUBLEWORD; - /*Program double word (64-bit : 4*16-bit) at a specified address.*/ - pFlash.DataRemaining = 4; - } - - /*Program halfword (16-bit) at a specified address.*/ - FLASH_Program_HalfWord(Address, (uint16_t)Data); - - return status; -} - -/** - * @brief This function handles FLASH interrupt request. - * @retval None - */ -void HAL_FLASH_IRQHandler(void) -{ - uint32_t addresstmp = 0; - - /* Check FLASH operation error flags */ -#if defined(FLASH_BANK2_END) - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR_BANK1) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR_BANK1) || \ - (__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR_BANK2) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR_BANK2))) -#else - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) ||__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR)) -#endif /* FLASH_BANK2_END */ - { - /*return the faulty address*/ - addresstmp = pFlash.Address; - /* Reset address */ - pFlash.Address = 0xFFFFFFFF; - - /*Save the Error code*/ - FLASH_SetErrorCode(); - - /* FLASH error interrupt user callback */ - HAL_FLASH_OperationErrorCallback(addresstmp); - - /* Stop the procedure ongoing*/ - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - } - - /* Check FLASH End of Operation flag */ -#if defined(FLASH_BANK2_END) - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP_BANK1)) - { - /* Clear FLASH End of Operation pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP_BANK1); -#else - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP)) - { - /* Clear FLASH End of Operation pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); -#endif /* FLASH_BANK2_END */ - - /* Process can continue only if no error detected */ - if(pFlash.ProcedureOnGoing != FLASH_PROC_NONE) - { - if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE) - { - /* Nb of pages to erased can be decreased */ - pFlash.DataRemaining--; - - /* Check if there are still pages to erase*/ - if(pFlash.DataRemaining != 0) - { - addresstmp = pFlash.Address; - /*Indicate user which sector has been erased*/ - HAL_FLASH_EndOfOperationCallback(addresstmp); - - /*Increment sector number*/ - addresstmp = pFlash.Address + FLASH_PAGE_SIZE; - pFlash.Address = addresstmp; - - /* If the erase operation is completed, disable the PER Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PER); - - FLASH_PageErase(addresstmp); - } - else - { - /*No more pages to Erase, user callback can be called.*/ - /*Reset Sector and stop Erase pages procedure*/ - pFlash.Address = addresstmp = 0xFFFFFFFF; - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(addresstmp); - } - } - else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) - { - /* Operation is completed, disable the MER Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_MER); - -#if defined(FLASH_BANK2_END) - /* Stop Mass Erase procedure if no pending mass erase on other bank */ - if (HAL_IS_BIT_CLR(FLASH->CR2, FLASH_CR2_MER)) - { -#endif /* FLASH_BANK2_END */ - /* MassErase ended. Return the selected bank*/ - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(0); - - /* Stop Mass Erase procedure*/ - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - } -#if defined(FLASH_BANK2_END) - } -#endif /* FLASH_BANK2_END */ - else - { - /* Nb of 16-bit data to program can be decreased */ - pFlash.DataRemaining--; - - /* Check if there are still 16-bit data to program */ - if(pFlash.DataRemaining != 0) - { - /* Increment address to 16-bit */ - pFlash.Address += 2; - addresstmp = pFlash.Address; - - /* Shift to have next 16-bit data */ - pFlash.Data = (pFlash.Data >> 16); - - /* Operation is completed, disable the PG Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PG); - - /*Program halfword (16-bit) at a specified address.*/ - FLASH_Program_HalfWord(addresstmp, (uint16_t)pFlash.Data); - } - else - { - /*Program ended. Return the selected address*/ - /* FLASH EOP interrupt user callback */ - if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMHALFWORD) - { - HAL_FLASH_EndOfOperationCallback(pFlash.Address); - } - else if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMWORD) - { - HAL_FLASH_EndOfOperationCallback(pFlash.Address - 2); - } - else - { - HAL_FLASH_EndOfOperationCallback(pFlash.Address - 6); - } - - /* Reset Address and stop Program procedure*/ - pFlash.Address = 0xFFFFFFFF; - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - } - } - } - } - -#if defined(FLASH_BANK2_END) - /* Check FLASH End of Operation flag */ - if(__HAL_FLASH_GET_FLAG( FLASH_FLAG_EOP_BANK2)) - { - /* Clear FLASH End of Operation pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP_BANK2); - - /* Process can continue only if no error detected */ - if(pFlash.ProcedureOnGoing != FLASH_PROC_NONE) - { - if(pFlash.ProcedureOnGoing == FLASH_PROC_PAGEERASE) - { - /* Nb of pages to erased can be decreased */ - pFlash.DataRemaining--; - - /* Check if there are still pages to erase*/ - if(pFlash.DataRemaining != 0) - { - /* Indicate user which page address has been erased*/ - HAL_FLASH_EndOfOperationCallback(pFlash.Address); - - /* Increment page address to next page */ - pFlash.Address += FLASH_PAGE_SIZE; - addresstmp = pFlash.Address; - - /* Operation is completed, disable the PER Bit */ - CLEAR_BIT(FLASH->CR2, FLASH_CR2_PER); - - FLASH_PageErase(addresstmp); - } - else - { - /*No more pages to Erase*/ - - /*Reset Address and stop Erase pages procedure*/ - pFlash.Address = 0xFFFFFFFF; - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(pFlash.Address); - } - } - else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE) - { - /* Operation is completed, disable the MER Bit */ - CLEAR_BIT(FLASH->CR2, FLASH_CR2_MER); - - if (HAL_IS_BIT_CLR(FLASH->CR, FLASH_CR_MER)) - { - /* MassErase ended. Return the selected bank*/ - /* FLASH EOP interrupt user callback */ - HAL_FLASH_EndOfOperationCallback(0); - - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - } - } - else - { - /* Nb of 16-bit data to program can be decreased */ - pFlash.DataRemaining--; - - /* Check if there are still 16-bit data to program */ - if(pFlash.DataRemaining != 0) - { - /* Increment address to 16-bit */ - pFlash.Address += 2; - addresstmp = pFlash.Address; - - /* Shift to have next 16-bit data */ - pFlash.Data = (pFlash.Data >> 16); - - /* Operation is completed, disable the PG Bit */ - CLEAR_BIT(FLASH->CR2, FLASH_CR2_PG); - - /*Program halfword (16-bit) at a specified address.*/ - FLASH_Program_HalfWord(addresstmp, (uint16_t)pFlash.Data); - } - else - { - /*Program ended. Return the selected address*/ - /* FLASH EOP interrupt user callback */ - if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMHALFWORD) - { - HAL_FLASH_EndOfOperationCallback(pFlash.Address); - } - else if (pFlash.ProcedureOnGoing == FLASH_PROC_PROGRAMWORD) - { - HAL_FLASH_EndOfOperationCallback(pFlash.Address-2); - } - else - { - HAL_FLASH_EndOfOperationCallback(pFlash.Address-6); - } - - /* Reset Address and stop Program procedure*/ - pFlash.Address = 0xFFFFFFFF; - pFlash.ProcedureOnGoing = FLASH_PROC_NONE; - } - } - } - } -#endif - - if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE) - { -#if defined(FLASH_BANK2_END) - /* Operation is completed, disable the PG, PER and MER Bits for both bank */ - CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_PER | FLASH_CR_MER)); - CLEAR_BIT(FLASH->CR2, (FLASH_CR2_PG | FLASH_CR2_PER | FLASH_CR2_MER)); - - /* Disable End of FLASH Operation and Error source interrupts for both banks */ - __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP_BANK1 | FLASH_IT_ERR_BANK1 | FLASH_IT_EOP_BANK2 | FLASH_IT_ERR_BANK2); -#else - /* Operation is completed, disable the PG, PER and MER Bits */ - CLEAR_BIT(FLASH->CR, (FLASH_CR_PG | FLASH_CR_PER | FLASH_CR_MER)); - - /* Disable End of FLASH Operation and Error source interrupts */ - __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); -#endif /* FLASH_BANK2_END */ - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - } -} - - -/** - * @brief FLASH end of operation interrupt callback - * @param ReturnValue: The value saved in this parameter depends on the ongoing procedure - * - Mass Erase: No return value expected - * - Pages Erase: Address of the page which has been erased - * (if 0xFFFFFFFF, it means that all the selected pages have been erased) - * - Program: Address which was selected for data program - * @retval none - */ -__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(ReturnValue); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_FLASH_EndOfOperationCallback could be implemented in the user file - */ -} - -/** - * @brief FLASH operation error interrupt callback - * @param ReturnValue: The value saved in this parameter depends on the ongoing procedure - * - Mass Erase: No return value expected - * - Pages Erase: Address of the page which returned an error - * - Program: Address which was selected for data program - * @retval none - */ -__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(ReturnValue); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_FLASH_OperationErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions - * @brief management functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the FLASH - memory operations. - -@endverbatim - * @{ - */ - -/** - * @brief Unlock the FLASH control register access - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Unlock(void) -{ - if (HAL_IS_BIT_SET(FLASH->CR, FLASH_CR_LOCK)) - { - /* Authorize the FLASH Registers access */ - WRITE_REG(FLASH->KEYR, FLASH_KEY1); - WRITE_REG(FLASH->KEYR, FLASH_KEY2); - } - else - { - return HAL_ERROR; - } - -#if defined(FLASH_BANK2_END) - if (HAL_IS_BIT_SET(FLASH->CR2, FLASH_CR2_LOCK)) - { - /* Authorize the FLASH BANK2 Registers access */ - WRITE_REG(FLASH->KEYR2, FLASH_KEY1); - WRITE_REG(FLASH->KEYR2, FLASH_KEY2); - } - else - { - return HAL_ERROR; - } - -#endif /* FLASH_BANK2_END */ - return HAL_OK; -} - -/** - * @brief Locks the FLASH control register access - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_Lock(void) -{ - /* Set the LOCK Bit to lock the FLASH Registers access */ - SET_BIT(FLASH->CR, FLASH_CR_LOCK); - -#if defined(FLASH_BANK2_END) - /* Set the LOCK Bit to lock the FLASH BANK2 Registers access */ - SET_BIT(FLASH->CR2, FLASH_CR2_LOCK); -#endif /* FLASH_BANK2_END */ - - return HAL_OK; -} - - -/** - * @brief Unlock the FLASH Option Control Registers access. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void) -{ - if (HAL_IS_BIT_CLR(FLASH->CR, FLASH_CR_OPTWRE)) - { - /* Authorizes the Option Byte register programming */ - WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY1); - WRITE_REG(FLASH->OPTKEYR, FLASH_OPTKEY2); - } - else - { - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Lock the FLASH Option Control Registers access. - * @retval HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Lock(void) -{ - /* Clear the OPTWRE Bit to lock the FLASH Option Byte Registers access */ - CLEAR_BIT(FLASH->CR, FLASH_CR_OPTWRE); - - return HAL_OK; -} - -/** - * @brief Launch the option byte loading. - * @note This function will reset automatically the MCU. - * @retval HAL_StatusTypeDef HAL Status - */ -HAL_StatusTypeDef HAL_FLASH_OB_Launch(void) -{ - /* Initiates a system reset request to launch the option byte loading */ - HAL_NVIC_SystemReset(); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State functions - * @brief Peripheral State functions - * -@verbatim - =============================================================================== - ##### Peripheral State functions ##### - =============================================================================== - [..] - This subsection permit to get in run-time the status of the FLASH peripheral. - -@endverbatim - * @{ - */ - -/** - * @brief Get the specific FLASH error flag. - * @retval FLASH_ErrorCode: The returned value can be: - * @ref FLASH_Error_Codes - */ -uint32_t HAL_FLASH_GetError(void) -{ - return pFlash.ErrorCode; -} -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup FLASH_Private_Functions - * @{ - */ - -/** - * @brief Program a half-word (16-bit) at a specified address. - * @param Address: specifies the address to be programmed. - * @param Data: specifies the data to be programmed. - * @retval None - */ -static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data) -{ - /* Clean the error context */ - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - -#if defined(FLASH_BANK2_END) - if(Address <= FLASH_BANK1_END) - { -#endif /* FLASH_BANK2_END */ - /* Proceed to program the new data */ - SET_BIT(FLASH->CR, FLASH_CR_PG); -#if defined(FLASH_BANK2_END) - } - else - { - /* Proceed to program the new data */ - SET_BIT(FLASH->CR2, FLASH_CR2_PG); - } -#endif /* FLASH_BANK2_END */ - - /* Write data in the address */ - *(__IO uint16_t*)Address = Data; -} - -/** - * @brief Wait for a FLASH operation to complete. - * @param Timeout: maximum flash operation timeout - * @retval HAL_StatusTypeDef HAL Status - */ -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout) -{ - /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset. - Even if the FLASH operation fails, the BUSY flag will be reset and an error - flag will be set */ - - uint32_t tickstart = HAL_GetTick(); - - while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY)) - { - if (Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0) || ((HAL_GetTick()-tickstart) > Timeout)) - { - return HAL_TIMEOUT; - } - } - } - - /* Check FLASH End of Operation flag */ - if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP)) - { - /* Clear FLASH End of Operation pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP); - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) || - __HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR) || - __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR)) - { - /*Save the error code*/ - FLASH_SetErrorCode(); - return HAL_ERROR; - } - - /* If there is no error flag set */ - return HAL_OK; -} - -#if defined(FLASH_BANK2_END) -/** - * @brief Wait for a FLASH BANK2 operation to complete. - * @param Timeout: maximum flash operation timeout - * @retval HAL_StatusTypeDef HAL Status - */ -HAL_StatusTypeDef FLASH_WaitForLastOperationBank2(uint32_t Timeout) -{ - /* Wait for the FLASH BANK2 operation to complete by polling on BUSY flag to be reset. - Even if the FLASH BANK2 operation fails, the BUSY flag will be reset and an error - flag will be set */ - - uint32_t tickstart = HAL_GetTick(); - - while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY_BANK2)) - { - if (Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0) || ((HAL_GetTick()-tickstart) > Timeout)) - { - return HAL_TIMEOUT; - } - } - } - - /* Check FLASH End of Operation flag */ - if (__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP_BANK2)) - { - /* Clear FLASH End of Operation pending bit */ - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP_BANK2); - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR_BANK2) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR_BANK2)) - { - /*Save the error code*/ - FLASH_SetErrorCode(); - return HAL_ERROR; - } - - /* If there is an error flag set */ - return HAL_OK; - -} -#endif /* FLASH_BANK2_END */ - -/** - * @brief Set the specific FLASH error flag. - * @retval None - */ -static void FLASH_SetErrorCode(void) -{ -#if defined(FLASH_BANK2_END) - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR_BANK2)) -#else - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR)) -#endif /* FLASH_BANK2_END */ - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP; - } -#if defined(FLASH_BANK2_END) - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR) || __HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR_BANK2)) -#else - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGERR)) -#endif /* FLASH_BANK2_END */ - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_PROG; - } - - if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPTVERR)) - { - pFlash.ErrorCode |= HAL_FLASH_ERROR_OPTV; - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPTVERR); - } - - /* Clear FLASH error pending bits */ -#if defined(FLASH_BANK2_END) - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_WRPERR | FLASH_FLAG_WRPERR_BANK2 | FLASH_FLAG_PGERR | FLASH_FLAG_PGERR_BANK2); -#else - __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_WRPERR | FLASH_FLAG_PGERR); -#endif /* FLASH_BANK2_END */ -} -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_FLASH_MODULE_ENABLED */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c deleted file mode 100644 index 0416efe..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c +++ /dev/null @@ -1,1140 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_flash_ex.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Extended FLASH HAL module driver. - * - * This file provides firmware functions to manage the following - * functionalities of the FLASH peripheral: - * + Extended Initialization/de-initialization functions - * + Extended I/O operation functions - * + Extended Peripheral Control functions - * - @verbatim - ============================================================================== - ##### Flash peripheral extended features ##### - ============================================================================== - - ##### How to use this driver ##### - ============================================================================== - [..] This driver provides functions to configure and program the FLASH memory - of all STM32F1xxx devices. It includes - - (++) Set/Reset the write protection - (++) Program the user Option Bytes - (++) Get the Read protection Level - - @endverbatim - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ -#ifdef HAL_FLASH_MODULE_ENABLED - -/** @addtogroup FLASH - * @{ - */ -/** @addtogroup FLASH_Private_Variables - * @{ - */ -/* Variables used for Erase pages under interruption*/ -extern FLASH_ProcessTypeDef pFlash; -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup FLASHEx FLASHEx - * @brief FLASH HAL Extension module driver - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup FLASHEx_Private_Constants FLASHEx Private Constants - * @{ - */ -#define FLASH_POSITION_IWDGSW_BIT (uint32_t)POSITION_VAL(FLASH_OBR_IWDG_SW) -#define FLASH_POSITION_OB_USERDATA0_BIT (uint32_t)POSITION_VAL(FLASH_OBR_DATA0) -#define FLASH_POSITION_OB_USERDATA1_BIT (uint32_t)POSITION_VAL(FLASH_OBR_DATA1) -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/** @defgroup FLASHEx_Private_Macros FLASHEx Private Macros - * @{ - */ -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions - * @{ - */ -/* Erase operations */ -static void FLASH_MassErase(uint32_t Banks); - -/* Option bytes control */ -static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage); -static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage); -static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel); -static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig); -static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data); -static uint32_t FLASH_OB_GetWRP(void); -static uint32_t FLASH_OB_GetRDP(void); -static uint8_t FLASH_OB_GetUser(void); - -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ -/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions - * @{ - */ - -/** @defgroup FLASHEx_Exported_Functions_Group1 FLASHEx Memory Erasing functions - * @brief FLASH Memory Erasing functions - * -@verbatim - ============================================================================== - ##### FLASH Erasing Programming functions ##### - ============================================================================== - - [..] The FLASH Memory Erasing functions, includes the following functions: - (+) @ref HAL_FLASHEx_Erase: return only when erase has been done - (+) @ref HAL_FLASHEx_Erase_IT: end of erase is done when @ref HAL_FLASH_EndOfOperationCallback - is called with parameter 0xFFFFFFFF - - [..] Any operation of erase should follow these steps: - (#) Call the @ref HAL_FLASH_Unlock() function to enable the flash control register and - program memory access. - (#) Call the desired function to erase page. - (#) Call the @ref HAL_FLASH_Lock() to disable the flash program memory access - (recommended to protect the FLASH memory against possible unwanted operation). - -@endverbatim - * @{ - */ - - -/** - * @brief Perform a mass erase or erase the specified FLASH memory pages - * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function - * must be called before. - * Call the @ref HAL_FLASH_Lock() to disable the flash memory access - * (recommended to protect the FLASH memory against possible unwanted operation) - * @param[in] pEraseInit pointer to an FLASH_EraseInitTypeDef structure that - * contains the configuration information for the erasing. - * - * @param[out] PageError pointer to variable that - * contains the configuration information on faulty page in case of error - * (0xFFFFFFFF means that all the pages have been correctly erased) - * - * @retval HAL_StatusTypeDef HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError) -{ - HAL_StatusTypeDef status = HAL_ERROR; - uint32_t address = 0; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); - - if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) - { -#if defined(FLASH_BANK2_END) - if (pEraseInit->Banks == FLASH_BANK_BOTH) - { - /* Mass Erase requested for Bank1 and Bank2 */ - /* Wait for last operation to be completed */ - if ((FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) && \ - (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)) - { - /*Mass erase to be done*/ - FLASH_MassErase(FLASH_BANK_BOTH); - - /* Wait for last operation to be completed */ - if ((FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) && \ - (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK)) - { - status = HAL_OK; - } - - /* If the erase operation is completed, disable the MER Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_MER); - CLEAR_BIT(FLASH->CR2, FLASH_CR2_MER); - } - } - else if (pEraseInit->Banks == FLASH_BANK_2) - { - /* Mass Erase requested for Bank2 */ - /* Wait for last operation to be completed */ - if (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) - { - /*Mass erase to be done*/ - FLASH_MassErase(FLASH_BANK_2); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the erase operation is completed, disable the MER Bit */ - CLEAR_BIT(FLASH->CR2, FLASH_CR2_MER); - } - } - else -#endif /* FLASH_BANK2_END */ - { - /* Mass Erase requested for Bank1 */ - /* Wait for last operation to be completed */ - if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) - { - /*Mass erase to be done*/ - FLASH_MassErase(FLASH_BANK_1); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the erase operation is completed, disable the MER Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_MER); - } - } - } - else - { - /* Page Erase is requested */ - /* Check the parameters */ - assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress)); - assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages)); - -#if defined(FLASH_BANK2_END) - /* Page Erase requested on address located on bank2 */ - if(pEraseInit->PageAddress > FLASH_BANK1_END) - { - /* Wait for last operation to be completed */ - if (FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) - { - /*Initialization of PageError variable*/ - *PageError = 0xFFFFFFFF; - - /* Erase by page by page to be done*/ - for(address = pEraseInit->PageAddress; - address < (pEraseInit->PageAddress + (pEraseInit->NbPages)*FLASH_PAGE_SIZE); - address += FLASH_PAGE_SIZE) - { - FLASH_PageErase(address); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperationBank2((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the erase operation is completed, disable the PER Bit */ - CLEAR_BIT(FLASH->CR2, FLASH_CR2_PER); - - if (status != HAL_OK) - { - /* In case of error, stop erase procedure and return the faulty address */ - *PageError = address; - break; - } - } - } - } - else -#endif /* FLASH_BANK2_END */ - { - /* Page Erase requested on address located on bank1 */ - /* Wait for last operation to be completed */ - if (FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE) == HAL_OK) - { - /*Initialization of PageError variable*/ - *PageError = 0xFFFFFFFF; - - /* Erase page by page to be done*/ - for(address = pEraseInit->PageAddress; - address < ((pEraseInit->NbPages * FLASH_PAGE_SIZE) + pEraseInit->PageAddress); - address += FLASH_PAGE_SIZE) - { - FLASH_PageErase(address); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the erase operation is completed, disable the PER Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_PER); - - if (status != HAL_OK) - { - /* In case of error, stop erase procedure and return the faulty address */ - *PageError = address; - break; - } - } - } - } - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Perform a mass erase or erase the specified FLASH memory pages with interrupt enabled - * @note To correctly run this function, the @ref HAL_FLASH_Unlock() function - * must be called before. - * Call the @ref HAL_FLASH_Lock() to disable the flash memory access - * (recommended to protect the FLASH memory against possible unwanted operation) - * @param pEraseInit pointer to an FLASH_EraseInitTypeDef structure that - * contains the configuration information for the erasing. - * - * @retval HAL_StatusTypeDef HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* If procedure already ongoing, reject the next one */ - if (pFlash.ProcedureOnGoing != FLASH_PROC_NONE) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase)); - - /* Enable End of FLASH Operation and Error source interrupts */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP | FLASH_IT_ERR); - -#if defined(FLASH_BANK2_END) - /* Enable End of FLASH Operation and Error source interrupts */ - __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP_BANK2 | FLASH_IT_ERR_BANK2); - -#endif - if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE) - { - /*Mass erase to be done*/ - pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE; - FLASH_MassErase(pEraseInit->Banks); - } - else - { - /* Erase by page to be done*/ - - /* Check the parameters */ - assert_param(IS_FLASH_PROGRAM_ADDRESS(pEraseInit->PageAddress)); - assert_param(IS_FLASH_NB_PAGES(pEraseInit->PageAddress, pEraseInit->NbPages)); - - pFlash.ProcedureOnGoing = FLASH_PROC_PAGEERASE; - pFlash.DataRemaining = pEraseInit->NbPages; - pFlash.Address = pEraseInit->PageAddress; - - /*Erase 1st page and wait for IT*/ - FLASH_PageErase(pEraseInit->PageAddress); - } - - return status; -} - -/** - * @} - */ - -/** @defgroup FLASHEx_Exported_Functions_Group2 Option Bytes Programming functions - * @brief Option Bytes Programming functions - * -@verbatim - ============================================================================== - ##### Option Bytes Programming functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control the FLASH - option bytes operations. - -@endverbatim - * @{ - */ - -/** - * @brief Erases the FLASH option bytes. - * @note This functions erases all option bytes except the Read protection (RDP). - * The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface - * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes - * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes - * (system reset will occur) - * @retval HAL status - */ - -HAL_StatusTypeDef HAL_FLASHEx_OBErase(void) -{ - uint8_t rdptmp = OB_RDP_LEVEL_0; - HAL_StatusTypeDef status = HAL_ERROR; - - /* Get the actual read protection Option Byte value */ - rdptmp = FLASH_OB_GetRDP(); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - /* Clean the error context */ - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - - /* If the previous operation is completed, proceed to erase the option bytes */ - SET_BIT(FLASH->CR, FLASH_CR_OPTER); - SET_BIT(FLASH->CR, FLASH_CR_STRT); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the erase operation is completed, disable the OPTER Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER); - - if(status == HAL_OK) - { - /* Restore the last read protection Option Byte value */ - status = FLASH_OB_RDP_LevelConfig(rdptmp); - } - } - - /* Return the erase status */ - return status; -} - -/** - * @brief Program option bytes - * @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface - * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes - * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes - * (system reset will occur) - * - * @param pOBInit pointer to an FLASH_OBInitStruct structure that - * contains the configuration information for the programming. - * - * @retval HAL_StatusTypeDef HAL Status - */ -HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit) -{ - HAL_StatusTypeDef status = HAL_ERROR; - - /* Process Locked */ - __HAL_LOCK(&pFlash); - - /* Check the parameters */ - assert_param(IS_OPTIONBYTE(pOBInit->OptionType)); - - /* Write protection configuration */ - if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP) - { - assert_param(IS_WRPSTATE(pOBInit->WRPState)); - if (pOBInit->WRPState == OB_WRPSTATE_ENABLE) - { - /* Enable of Write protection on the selected page */ - status = FLASH_OB_EnableWRP(pOBInit->WRPPage); - } - else - { - /* Disable of Write protection on the selected page */ - status = FLASH_OB_DisableWRP(pOBInit->WRPPage); - } - if (status != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - return status; - } - } - - /* Read protection configuration */ - if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP) - { - status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel); - if (status != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - return status; - } - } - - /* USER configuration */ - if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER) - { - status = FLASH_OB_UserConfig(pOBInit->USERConfig); - if (status != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - return status; - } - } - - /* DATA configuration*/ - if((pOBInit->OptionType & OPTIONBYTE_DATA) == OPTIONBYTE_DATA) - { - status = FLASH_OB_ProgramData(pOBInit->DATAAddress, pOBInit->DATAData); - if (status != HAL_OK) - { - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - return status; - } - } - - /* Process Unlocked */ - __HAL_UNLOCK(&pFlash); - - return status; -} - -/** - * @brief Get the Option byte configuration - * @param pOBInit pointer to an FLASH_OBInitStruct structure that - * contains the configuration information for the programming. - * - * @retval None - */ -void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit) -{ - pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER; - - /*Get WRP*/ - pOBInit->WRPPage = FLASH_OB_GetWRP(); - - /*Get RDP Level*/ - pOBInit->RDPLevel = FLASH_OB_GetRDP(); - - /*Get USER*/ - pOBInit->USERConfig = FLASH_OB_GetUser(); -} - -/** - * @brief Get the Option byte user data - * @param DATAAdress Address of the option byte DATA - * This parameter can be one of the following values: - * @arg @ref OB_DATA_ADDRESS_DATA0 - * @arg @ref OB_DATA_ADDRESS_DATA1 - * @retval Value programmed in USER data - */ -uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress) -{ - uint32_t value = 0; - - if (DATAAdress == OB_DATA_ADDRESS_DATA0) - { - /* Get value programmed in OB USER Data0 */ - value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA0) >> FLASH_POSITION_OB_USERDATA0_BIT; - } - else - { - /* Get value programmed in OB USER Data1 */ - value = READ_BIT(FLASH->OBR, FLASH_OBR_DATA1) >> FLASH_POSITION_OB_USERDATA1_BIT; - } - - return value; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup FLASHEx_Private_Functions - * @{ - */ - -/** - * @brief Full erase of FLASH memory Bank - * @param Banks Banks to be erased - * This parameter can be one of the following values: - * @arg @ref FLASH_BANK_1 Bank1 to be erased - @if STM32F101xG - * @arg @ref FLASH_BANK_2 Bank2 to be erased - * @arg @ref FLASH_BANK_BOTH Bank1 and Bank2 to be erased - @endif - @if STM32F103xG - * @arg @ref FLASH_BANK_2 Bank2 to be erased - * @arg @ref FLASH_BANK_BOTH Bank1 and Bank2 to be erased - @endif - * - * @retval None - */ -static void FLASH_MassErase(uint32_t Banks) -{ - /* Check the parameters */ - assert_param(IS_FLASH_BANK(Banks)); - - /* Clean the error context */ - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - -#if defined(FLASH_BANK2_END) - if(Banks == FLASH_BANK_BOTH) - { - /* bank1 & bank2 will be erased*/ - SET_BIT(FLASH->CR, FLASH_CR_MER); - SET_BIT(FLASH->CR2, FLASH_CR2_MER); - SET_BIT(FLASH->CR, FLASH_CR_STRT); - SET_BIT(FLASH->CR2, FLASH_CR2_STRT); - } - else if(Banks == FLASH_BANK_2) - { - /*Only bank2 will be erased*/ - SET_BIT(FLASH->CR2, FLASH_CR2_MER); - SET_BIT(FLASH->CR2, FLASH_CR2_STRT); - } - else - { -#endif /* FLASH_BANK2_END */ - /* Only bank1 will be erased*/ - SET_BIT(FLASH->CR, FLASH_CR_MER); - SET_BIT(FLASH->CR, FLASH_CR_STRT); -#if defined(FLASH_BANK2_END) - } -#endif /* FLASH_BANK2_END */ -} - -/** - * @brief Enable the write protection of the desired pages - * @note An option byte erase is done automatically in this function. - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash page i if - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * - * @param WriteProtectPage specifies the page(s) to be write protected. - * The value of this parameter depend on device used within the same series - * @retval HAL status - */ -static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WriteProtectPage) -{ - HAL_StatusTypeDef status = HAL_OK; - uint16_t WRP0_Data = 0xFFFF; -#if defined(FLASH_WRP1_WRP1) - uint16_t WRP1_Data = 0xFFFF; -#endif /* FLASH_WRP1_WRP1 */ -#if defined(FLASH_WRP2_WRP2) - uint16_t WRP2_Data = 0xFFFF; -#endif /* FLASH_WRP2_WRP2 */ -#if defined(FLASH_WRP3_WRP3) - uint16_t WRP3_Data = 0xFFFF; -#endif /* FLASH_WRP3_WRP3 */ - - /* Check the parameters */ - assert_param(IS_OB_WRP(WriteProtectPage)); - - /* Get current write protected pages and the new pages to be protected ******/ - WriteProtectPage = (uint32_t)(~((~FLASH_OB_GetWRP()) | WriteProtectPage)); - -#if defined(OB_WRP_PAGES0TO15MASK) - WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK); -#elif defined(OB_WRP_PAGES0TO31MASK) - WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK); -#endif /* OB_WRP_PAGES0TO31MASK */ - -#if defined(OB_WRP_PAGES16TO31MASK) - WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8); -#elif defined(OB_WRP_PAGES32TO63MASK) - WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8); -#endif /* OB_WRP_PAGES32TO63MASK */ - -#if defined(OB_WRP_PAGES64TO95MASK) - WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES64TO95MASK) >> 16); -#endif /* OB_WRP_PAGES64TO95MASK */ -#if defined(OB_WRP_PAGES32TO47MASK) - WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16); -#endif /* OB_WRP_PAGES32TO47MASK */ - -#if defined(OB_WRP_PAGES96TO127MASK) - WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES96TO127MASK) >> 24); -#elif defined(OB_WRP_PAGES48TO255MASK) - WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO255MASK) >> 24); -#elif defined(OB_WRP_PAGES48TO511MASK) - WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO511MASK) >> 24); -#elif defined(OB_WRP_PAGES48TO127MASK) - WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24); -#endif /* OB_WRP_PAGES96TO127MASK */ - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - /* Clean the error context */ - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - - /* To be able to write again option byte, need to perform a option byte erase */ - status = HAL_FLASHEx_OBErase(); - if (status == HAL_OK) - { - /* Enable write protection */ - SET_BIT(FLASH->CR, FLASH_CR_OPTPG); - -#if defined(FLASH_WRP0_WRP0) - if(WRP0_Data != 0xFF) - { - OB->WRP0 &= WRP0_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - } -#endif /* FLASH_WRP0_WRP0 */ - -#if defined(FLASH_WRP1_WRP1) - if((status == HAL_OK) && (WRP1_Data != 0xFF)) - { - OB->WRP1 &= WRP1_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - } -#endif /* FLASH_WRP1_WRP1 */ - -#if defined(FLASH_WRP2_WRP2) - if((status == HAL_OK) && (WRP2_Data != 0xFF)) - { - OB->WRP2 &= WRP2_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - } -#endif /* FLASH_WRP2_WRP2 */ - -#if defined(FLASH_WRP3_WRP3) - if((status == HAL_OK) && (WRP3_Data != 0xFF)) - { - OB->WRP3 &= WRP3_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - } -#endif /* FLASH_WRP3_WRP3 */ - - /* if the program operation is completed, disable the OPTPG Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); - } - } - - return status; -} - -/** - * @brief Disable the write protection of the desired pages - * @note An option byte erase is done automatically in this function. - * @note When the memory read protection level is selected (RDP level = 1), - * it is not possible to program or erase the flash page i if - * debug features are connected or boot code is executed in RAM, even if nWRPi = 1 - * - * @param WriteProtectPage specifies the page(s) to be write unprotected. - * The value of this parameter depend on device used within the same series - * @retval HAL status - */ -static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WriteProtectPage) -{ - HAL_StatusTypeDef status = HAL_OK; - uint16_t WRP0_Data = 0xFFFF; -#if defined(FLASH_WRP1_WRP1) - uint16_t WRP1_Data = 0xFFFF; -#endif /* FLASH_WRP1_WRP1 */ -#if defined(FLASH_WRP2_WRP2) - uint16_t WRP2_Data = 0xFFFF; -#endif /* FLASH_WRP2_WRP2 */ -#if defined(FLASH_WRP3_WRP3) - uint16_t WRP3_Data = 0xFFFF; -#endif /* FLASH_WRP3_WRP3 */ - - /* Check the parameters */ - assert_param(IS_OB_WRP(WriteProtectPage)); - - /* Get current write protected pages and the new pages to be unprotected ******/ - WriteProtectPage = (FLASH_OB_GetWRP() | WriteProtectPage); - -#if defined(OB_WRP_PAGES0TO15MASK) - WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO15MASK); -#elif defined(OB_WRP_PAGES0TO31MASK) - WRP0_Data = (uint16_t)(WriteProtectPage & OB_WRP_PAGES0TO31MASK); -#endif /* OB_WRP_PAGES0TO31MASK */ - -#if defined(OB_WRP_PAGES16TO31MASK) - WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES16TO31MASK) >> 8); -#elif defined(OB_WRP_PAGES32TO63MASK) - WRP1_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO63MASK) >> 8); -#endif /* OB_WRP_PAGES32TO63MASK */ - -#if defined(OB_WRP_PAGES64TO95MASK) - WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES64TO95MASK) >> 16); -#endif /* OB_WRP_PAGES64TO95MASK */ -#if defined(OB_WRP_PAGES32TO47MASK) - WRP2_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES32TO47MASK) >> 16); -#endif /* OB_WRP_PAGES32TO47MASK */ - -#if defined(OB_WRP_PAGES96TO127MASK) - WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES96TO127MASK) >> 24); -#elif defined(OB_WRP_PAGES48TO255MASK) - WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO255MASK) >> 24); -#elif defined(OB_WRP_PAGES48TO511MASK) - WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO511MASK) >> 24); -#elif defined(OB_WRP_PAGES48TO127MASK) - WRP3_Data = (uint16_t)((WriteProtectPage & OB_WRP_PAGES48TO127MASK) >> 24); -#endif /* OB_WRP_PAGES96TO127MASK */ - - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - /* Clean the error context */ - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - - /* To be able to write again option byte, need to perform a option byte erase */ - status = HAL_FLASHEx_OBErase(); - if (status == HAL_OK) - { - SET_BIT(FLASH->CR, FLASH_CR_OPTPG); - -#if defined(FLASH_WRP0_WRP0) - if(WRP0_Data != 0xFF) - { - OB->WRP0 |= WRP0_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - } -#endif /* FLASH_WRP0_WRP0 */ - -#if defined(FLASH_WRP1_WRP1) - if((status == HAL_OK) && (WRP1_Data != 0xFF)) - { - OB->WRP1 |= WRP1_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - } -#endif /* FLASH_WRP1_WRP1 */ - -#if defined(FLASH_WRP2_WRP2) - if((status == HAL_OK) && (WRP2_Data != 0xFF)) - { - OB->WRP2 |= WRP2_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - } -#endif /* FLASH_WRP2_WRP2 */ - -#if defined(FLASH_WRP3_WRP3) - if((status == HAL_OK) && (WRP3_Data != 0xFF)) - { - OB->WRP3 |= WRP3_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - } -#endif /* FLASH_WRP3_WRP3 */ - - /* if the program operation is completed, disable the OPTPG Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); - } - } - return status; -} - -/** - * @brief Set the read protection level. - * @param ReadProtectLevel specifies the read protection level. - * This parameter can be one of the following values: - * @arg @ref OB_RDP_LEVEL_0 No protection - * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory - * @retval HAL status - */ -static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t ReadProtectLevel) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_RDP_LEVEL(ReadProtectLevel)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - /* Clean the error context */ - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - - /* If the previous operation is completed, proceed to erase the option bytes */ - SET_BIT(FLASH->CR, FLASH_CR_OPTER); - SET_BIT(FLASH->CR, FLASH_CR_STRT); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the erase operation is completed, disable the OPTER Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_OPTER); - - if(status == HAL_OK) - { - /* Enable the Option Bytes Programming operation */ - SET_BIT(FLASH->CR, FLASH_CR_OPTPG); - - WRITE_REG(OB->RDP, ReadProtectLevel); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* if the program operation is completed, disable the OPTPG Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); - } - } - - return status; -} - -/** - * @brief Program the FLASH User Option Byte. - * @note Programming of the OB should be performed only after an erase (otherwise PGERR occurs) - * @param UserConfig The FLASH User Option Bytes values FLASH_OBR_IWDG_SW(Bit2), - * FLASH_OBR_nRST_STOP(Bit3),FLASH_OBR_nRST_STDBY(Bit4). - * And BFBF2(Bit5) for STM32F101xG and STM32F103xG . - * @retval HAL status - */ -static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t UserConfig) -{ - HAL_StatusTypeDef status = HAL_OK; - - /* Check the parameters */ - assert_param(IS_OB_IWDG_SOURCE((UserConfig&OB_IWDG_SW))); - assert_param(IS_OB_STOP_SOURCE((UserConfig&OB_STOP_NO_RST))); - assert_param(IS_OB_STDBY_SOURCE((UserConfig&OB_STDBY_NO_RST))); -#if defined(FLASH_BANK2_END) - assert_param(IS_OB_BOOT1((UserConfig&OB_BOOT1_SET))); -#endif /* FLASH_BANK2_END */ - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - /* Clean the error context */ - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - - /* Enable the Option Bytes Programming operation */ - SET_BIT(FLASH->CR, FLASH_CR_OPTPG); - -#if defined(FLASH_BANK2_END) - OB->USER = (UserConfig | 0xF0); -#else - OB->USER = (UserConfig | 0x88); -#endif /* FLASH_BANK2_END */ - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* if the program operation is completed, disable the OPTPG Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); - } - - return status; -} - -/** - * @brief Programs a half word at a specified Option Byte Data address. - * @note The function @ref HAL_FLASH_Unlock() should be called before to unlock the FLASH interface - * The function @ref HAL_FLASH_OB_Unlock() should be called before to unlock the options bytes - * The function @ref HAL_FLASH_OB_Launch() should be called after to force the reload of the options bytes - * (system reset will occur) - * Programming of the OB should be performed only after an erase (otherwise PGERR occurs) - * @param Address specifies the address to be programmed. - * This parameter can be 0x1FFFF804 or 0x1FFFF806. - * @param Data specifies the data to be programmed. - * @retval HAL status - */ -static HAL_StatusTypeDef FLASH_OB_ProgramData(uint32_t Address, uint8_t Data) -{ - HAL_StatusTypeDef status = HAL_ERROR; - - /* Check the parameters */ - assert_param(IS_OB_DATA_ADDRESS(Address)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - if(status == HAL_OK) - { - /* Clean the error context */ - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - - /* Enables the Option Bytes Programming operation */ - SET_BIT(FLASH->CR, FLASH_CR_OPTPG); - *(__IO uint16_t*)Address = Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE); - - /* If the program operation is completed, disable the OPTPG Bit */ - CLEAR_BIT(FLASH->CR, FLASH_CR_OPTPG); - } - /* Return the Option Byte Data Program Status */ - return status; -} - -/** - * @brief Return the FLASH Write Protection Option Bytes value. - * @retval The FLASH Write Protection Option Bytes value - */ -static uint32_t FLASH_OB_GetWRP(void) -{ - /* Return the FLASH write protection Register value */ - return (uint32_t)(READ_REG(FLASH->WRPR)); -} - -/** - * @brief Returns the FLASH Read Protection level. - * @retval FLASH ReadOut Protection Status: - * This parameter can be one of the following values: - * @arg @ref OB_RDP_LEVEL_0 No protection - * @arg @ref OB_RDP_LEVEL_1 Read protection of the memory - */ -static uint32_t FLASH_OB_GetRDP(void) -{ - uint32_t readstatus = OB_RDP_LEVEL_0; - uint32_t tmp_reg = 0; - - /* Read RDP level bits */ - tmp_reg = READ_BIT(FLASH->OBR, FLASH_OBR_RDPRT); - - if (tmp_reg == FLASH_OBR_RDPRT) - { - readstatus = OB_RDP_LEVEL_1; - } - else - { - readstatus = OB_RDP_LEVEL_0; - } - - return readstatus; -} - -/** - * @brief Return the FLASH User Option Byte value. - * @retval The FLASH User Option Bytes values: FLASH_OBR_IWDG_SW(Bit2), - * FLASH_OBR_nRST_STOP(Bit3),FLASH_OBR_nRST_STDBY(Bit4). - * And FLASH_OBR_BFB2(Bit5) for STM32F101xG and STM32F103xG . - */ -static uint8_t FLASH_OB_GetUser(void) -{ - /* Return the User Option Byte */ - return (uint8_t)((READ_REG(FLASH->OBR) & FLASH_OBR_USER) >> FLASH_POSITION_IWDGSW_BIT); -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup FLASH - * @{ - */ - -/** @addtogroup FLASH_Private_Functions - * @{ - */ - -/** - * @brief Erase the specified FLASH memory page - * @param PageAddress FLASH page to erase - * The value of this parameter depend on device used within the same series - * - * @retval None - */ -void FLASH_PageErase(uint32_t PageAddress) -{ - /* Clean the error context */ - pFlash.ErrorCode = HAL_FLASH_ERROR_NONE; - -#if defined(FLASH_BANK2_END) - if(PageAddress > FLASH_BANK1_END) - { - /* Proceed to erase the page */ - SET_BIT(FLASH->CR2, FLASH_CR2_PER); - WRITE_REG(FLASH->AR2, PageAddress); - SET_BIT(FLASH->CR2, FLASH_CR2_STRT); - } - else - { -#endif /* FLASH_BANK2_END */ - /* Proceed to erase the page */ - SET_BIT(FLASH->CR, FLASH_CR_PER); - WRITE_REG(FLASH->AR, PageAddress); - SET_BIT(FLASH->CR, FLASH_CR_STRT); -#if defined(FLASH_BANK2_END) - } -#endif /* FLASH_BANK2_END */ -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_FLASH_MODULE_ENABLED */ -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c deleted file mode 100644 index 4e7c78a..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c +++ /dev/null @@ -1,597 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_gpio.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief GPIO HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the General Purpose Input/Output (GPIO) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * - @verbatim - ============================================================================== - ##### GPIO Peripheral features ##### - ============================================================================== - [..] - Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each - port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software - in several modes: - (+) Input mode - (+) Analog mode - (+) Output mode - (+) Alternate function mode - (+) External interrupt/event lines - - [..] - During and just after reset, the alternate functions and external interrupt - lines are not active and the I/O ports are configured in input floating mode. - - [..] - All GPIO pins have weak internal pull-up and pull-down resistors, which can be - activated or not. - - [..] - In Output or Alternate mode, each IO can be configured on open-drain or push-pull - type and the IO speed can be selected depending on the VDD value. - - [..] - All ports have external interrupt/event capability. To use external interrupt - lines, the port must be configured in input mode. All available GPIO pins are - connected to the 16 external interrupt/event lines from EXTI0 to EXTI15. - - [..] - The external interrupt/event controller consists of up to 20 edge detectors in connectivity - line devices, or 19 edge detectors in other devices for generating event/interrupt requests. - Each input line can be independently configured to select the type (event or interrupt) and - the corresponding trigger event (rising or falling or both). Each line can also masked - independently. A pending register maintains the status line of the interrupt requests - - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Enable the GPIO APB2 clock using the following function : __HAL_RCC_GPIOx_CLK_ENABLE(). - - (#) Configure the GPIO pin(s) using HAL_GPIO_Init(). - (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure - (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef - structure. - (++) In case of Output or alternate function mode selection: the speed is - configured through "Speed" member from GPIO_InitTypeDef structure - (++) Analog mode is required when a pin is to be used as ADC channel - or DAC output. - (++) In case of external interrupt/event selection the "Mode" member from - GPIO_InitTypeDef structure select the type (interrupt or event) and - the corresponding trigger event (rising or falling or both). - - (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority - mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using - HAL_NVIC_EnableIRQ(). - - (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin(). - - (#) To set/reset the level of a pin configured in output mode use - HAL_GPIO_WritePin()/HAL_GPIO_TogglePin(). - - (#) To lock pin configuration until next reset use HAL_GPIO_LockPin(). - - (#) During and just after reset, the alternate functions are not - active and the GPIO pins are configured in input floating mode (except JTAG - pins). - - (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose - (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has - priority over the GPIO function. - - (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as - general purpose PD0 and PD1, respectively, when the HSE oscillator is off. - The HSE has priority over the GPIO function. - - @endverbatim - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup GPIO GPIO - * @brief GPIO HAL module driver - * @{ - */ - -#ifdef HAL_GPIO_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup GPIO_Private_Constants GPIO Private Constants - * @{ - */ - -#define GPIO_MODE ((uint32_t)0x00000003) -#define EXTI_MODE ((uint32_t)0x10000000) -#define GPIO_MODE_IT ((uint32_t)0x00010000) -#define GPIO_MODE_EVT ((uint32_t)0x00020000) -#define RISING_EDGE ((uint32_t)0x00100000) -#define FALLING_EDGE ((uint32_t)0x00200000) -#define GPIO_OUTPUT_TYPE ((uint32_t)0x00000010) -#define GPIO_NUMBER ((uint32_t)16) - -/* Definitions for bit manipulation of CRL and CRH register */ -#define GPIO_CR_MODE_INPUT ((uint32_t)0x00000000) /*!< 00: Input mode (reset state) */ -#define GPIO_CR_CNF_ANALOG ((uint32_t)0x00000000) /*!< 00: Analog mode */ -#define GPIO_CR_CNF_INPUT_FLOATING ((uint32_t)0x00000004) /*!< 01: Floating input (reset state) */ -#define GPIO_CR_CNF_INPUT_PU_PD ((uint32_t)0x00000008) /*!< 10: Input with pull-up / pull-down */ -#define GPIO_CR_CNF_GP_OUTPUT_PP ((uint32_t)0x00000000) /*!< 00: General purpose output push-pull */ -#define GPIO_CR_CNF_GP_OUTPUT_OD ((uint32_t)0x00000004) /*!< 01: General purpose output Open-drain */ -#define GPIO_CR_CNF_AF_OUTPUT_PP ((uint32_t)0x00000008) /*!< 10: Alternate function output Push-pull */ -#define GPIO_CR_CNF_AF_OUTPUT_OD ((uint32_t)0x0000000C) /*!< 11: Alternate function output Open-drain */ - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup GPIO_Exported_Functions GPIO Exported Functions - * @{ - */ - -/** @defgroup GPIO_Exported_Functions_Group1 Initialization and deinitialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and deinitialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to initialize and de-initialize the GPIOs - to be ready for use. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init. - * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral - * @param GPIO_Init: pointer to a GPIO_InitTypeDef structure that contains - * the configuration information for the specified GPIO peripheral. - * @retval None - */ -void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init) -{ - uint32_t position; - uint32_t ioposition = 0x00; - uint32_t iocurrent = 0x00; - uint32_t temp = 0x00; - uint32_t config = 0x00; - __IO uint32_t *configregister; /* Store the address of CRL or CRH register based on pin number */ - uint32_t registeroffset = 0; /* offset used during computation of CNF and MODE bits placement inside CRL or CRH register */ - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Init->Pin)); - assert_param(IS_GPIO_MODE(GPIO_Init->Mode)); - - /* Configure the port pins */ - for (position = 0; position < GPIO_NUMBER; position++) - { - /* Get the IO position */ - ioposition = ((uint32_t)0x01) << position; - - /* Get the current IO position */ - iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition; - - if (iocurrent == ioposition) - { - /* Check the Alternate function parameters */ - assert_param(IS_GPIO_AF_INSTANCE(GPIOx)); - - /* Based on the required mode, filling config variable with MODEy[1:0] and CNFy[3:2] corresponding bits */ - switch (GPIO_Init->Mode) - { - /* If we are configuring the pin in OUTPUT push-pull mode */ - case GPIO_MODE_OUTPUT_PP: - /* Check the GPIO speed parameter */ - assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); - config = GPIO_Init->Speed + GPIO_CR_CNF_GP_OUTPUT_PP; - break; - - /* If we are configuring the pin in OUTPUT open-drain mode */ - case GPIO_MODE_OUTPUT_OD: - /* Check the GPIO speed parameter */ - assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); - config = GPIO_Init->Speed + GPIO_CR_CNF_GP_OUTPUT_OD; - break; - - /* If we are configuring the pin in ALTERNATE FUNCTION push-pull mode */ - case GPIO_MODE_AF_PP: - /* Check the GPIO speed parameter */ - assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); - config = GPIO_Init->Speed + GPIO_CR_CNF_AF_OUTPUT_PP; - break; - - /* If we are configuring the pin in ALTERNATE FUNCTION open-drain mode */ - case GPIO_MODE_AF_OD: - /* Check the GPIO speed parameter */ - assert_param(IS_GPIO_SPEED(GPIO_Init->Speed)); - config = GPIO_Init->Speed + GPIO_CR_CNF_AF_OUTPUT_OD; - break; - - /* If we are configuring the pin in INPUT (also applicable to EVENT and IT mode) */ - case GPIO_MODE_INPUT: - case GPIO_MODE_IT_RISING: - case GPIO_MODE_IT_FALLING: - case GPIO_MODE_IT_RISING_FALLING: - case GPIO_MODE_EVT_RISING: - case GPIO_MODE_EVT_FALLING: - case GPIO_MODE_EVT_RISING_FALLING: - /* Check the GPIO pull parameter */ - assert_param(IS_GPIO_PULL(GPIO_Init->Pull)); - if(GPIO_Init->Pull == GPIO_NOPULL) - { - config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_INPUT_FLOATING; - } - else if(GPIO_Init->Pull == GPIO_PULLUP) - { - config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_INPUT_PU_PD; - - /* Set the corresponding ODR bit */ - GPIOx->BSRR = ioposition; - } - else /* GPIO_PULLDOWN */ - { - config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_INPUT_PU_PD; - - /* Reset the corresponding ODR bit */ - GPIOx->BRR = ioposition; - } - break; - - /* If we are configuring the pin in INPUT analog mode */ - case GPIO_MODE_ANALOG: - config = GPIO_CR_MODE_INPUT + GPIO_CR_CNF_ANALOG; - break; - - /* Parameters are checked with assert_param */ - default: - break; - } - - /* Check if the current bit belongs to first half or last half of the pin count number - in order to address CRH or CRL register*/ - configregister = (iocurrent < GPIO_PIN_8) ? &GPIOx->CRL : &GPIOx->CRH; - registeroffset = (iocurrent < GPIO_PIN_8) ? (position << 2) : ((position - 8) << 2); - - /* Apply the new configuration of the pin to the register */ - MODIFY_REG((*configregister), ((GPIO_CRL_MODE0 | GPIO_CRL_CNF0) << registeroffset ), (config << registeroffset)); - - /*--------------------- EXTI Mode Configuration ------------------------*/ - /* Configure the External Interrupt or event for the current IO */ - if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE) - { - /* Enable AFIO Clock */ - __HAL_RCC_AFIO_CLK_ENABLE(); - temp = AFIO->EXTICR[position >> 2]; - CLEAR_BIT(temp, ((uint32_t)0x0F) << (4 * (position & 0x03))); - SET_BIT(temp, (GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03))); - AFIO->EXTICR[position >> 2] = temp; - - - /* Configure the interrupt mask */ - if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT) - { - SET_BIT(EXTI->IMR, iocurrent); - } - else - { - CLEAR_BIT(EXTI->IMR, iocurrent); - } - - /* Configure the event mask */ - if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT) - { - SET_BIT(EXTI->EMR, iocurrent); - } - else - { - CLEAR_BIT(EXTI->EMR, iocurrent); - } - - /* Enable or disable the rising trigger */ - if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE) - { - SET_BIT(EXTI->RTSR, iocurrent); - } - else - { - CLEAR_BIT(EXTI->RTSR, iocurrent); - } - - /* Enable or disable the falling trigger */ - if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE) - { - SET_BIT(EXTI->FTSR, iocurrent); - } - else - { - CLEAR_BIT(EXTI->FTSR, iocurrent); - } - } - } - } -} - -/** - * @brief De-initializes the GPIOx peripheral registers to their default reset values. - * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral - * @param GPIO_Pin: specifies the port bit to be written. - * This parameter can be one of GPIO_PIN_x where x can be (0..15). - * @retval None - */ -void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin) -{ - uint32_t position = 0x00; - uint32_t iocurrent = 0x00; - uint32_t tmp = 0x00; - __IO uint32_t *configregister; /* Store the address of CRL or CRH register based on pin number */ - uint32_t registeroffset = 0; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_INSTANCE(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - /* Configure the port pins */ - while ((GPIO_Pin >> position) != 0) - { - /* Get current io position */ - iocurrent = (GPIO_Pin) & ((uint32_t)1 << position); - - if (iocurrent) - { - /*------------------------- GPIO Mode Configuration --------------------*/ - /* Check if the current bit belongs to first half or last half of the pin count number - in order to address CRH or CRL register */ - configregister = (iocurrent < GPIO_PIN_8) ? &GPIOx->CRL : &GPIOx->CRH; - registeroffset = (iocurrent < GPIO_PIN_8) ? (position << 2) : ((position - 8) << 2); - - /* CRL/CRH default value is floating input(0x04) shifted to correct position */ - MODIFY_REG(*configregister, ((GPIO_CRL_MODE0 | GPIO_CRL_CNF0) << registeroffset ), GPIO_CRL_CNF0_0 << registeroffset); - - /* ODR default value is 0 */ - CLEAR_BIT(GPIOx->ODR, iocurrent); - - /*------------------------- EXTI Mode Configuration --------------------*/ - /* Clear the External Interrupt or Event for the current IO */ - - tmp = AFIO->EXTICR[position >> 2]; - tmp &= (((uint32_t)0x0F) << (4 * (position & 0x03))); - if(tmp == (GPIO_GET_INDEX(GPIOx) << (4 * (position & 0x03)))) - { - tmp = ((uint32_t)0x0F) << (4 * (position & 0x03)); - CLEAR_BIT(AFIO->EXTICR[position >> 2], tmp); - - /* Clear EXTI line configuration */ - CLEAR_BIT(EXTI->IMR, (uint32_t)iocurrent); - CLEAR_BIT(EXTI->EMR, (uint32_t)iocurrent); - - /* Clear Rising Falling edge configuration */ - CLEAR_BIT(EXTI->RTSR, (uint32_t)iocurrent); - CLEAR_BIT(EXTI->FTSR, (uint32_t)iocurrent); - } - } - - position++; - } -} - -/** - * @} - */ - -/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions - * @brief GPIO Read and Write - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the GPIOs. - -@endverbatim - * @{ - */ -/** - * @brief Reads the specified input port pin. - * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral - * @param GPIO_Pin: specifies the port bit to read. - * This parameter can be GPIO_PIN_x where x can be (0..15). - * @retval The input port pin value. - */ -GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - GPIO_PinState bitstatus; - - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET) - { - bitstatus = GPIO_PIN_SET; - } - else - { - bitstatus = GPIO_PIN_RESET; - } - return bitstatus; -} - -/** - * @brief Sets or clears the selected data port bit. - * - * @note This function uses GPIOx_BSRR register to allow atomic read/modify - * accesses. In this way, there is no risk of an IRQ occurring between - * the read and the modify access. - * - * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral - * @param GPIO_Pin: specifies the port bit to be written. - * This parameter can be one of GPIO_PIN_x where x can be (0..15). - * @param PinState: specifies the value to be written to the selected bit. - * This parameter can be one of the GPIO_PinState enum values: - * @arg GPIO_BIT_RESET: to clear the port pin - * @arg GPIO_BIT_SET: to set the port pin - * @retval None - */ -void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState) -{ - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - assert_param(IS_GPIO_PIN_ACTION(PinState)); - - if(PinState != GPIO_PIN_RESET) - { - GPIOx->BSRR = GPIO_Pin; - } - else - { - GPIOx->BSRR = (uint32_t)GPIO_Pin << 16; - } -} - -/** - * @brief Toggles the specified GPIO pin - * @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral - * @param GPIO_Pin: Specifies the pins to be toggled. - * @retval None - */ -void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - /* Check the parameters */ - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - GPIOx->ODR ^= GPIO_Pin; -} - -/** -* @brief Locks GPIO Pins configuration registers. -* @note The locking mechanism allows the IO configuration to be frozen. When the LOCK sequence -* has been applied on a port bit, it is no longer possible to modify the value of the port bit until -* the next reset. -* @param GPIOx: where x can be (A..G depending on device used) to select the GPIO peripheral -* @param GPIO_Pin: specifies the port bit to be locked. -* This parameter can be any combination of GPIO_Pin_x where x can be (0..15). -* @retval None -*/ -HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - __IO uint32_t tmp = GPIO_LCKR_LCKK; - - /* Check the parameters */ - assert_param(IS_GPIO_LOCK_INSTANCE(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - /* Apply lock key write sequence */ - SET_BIT(tmp, GPIO_Pin); - /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ - GPIOx->LCKR = tmp; - /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */ - GPIOx->LCKR = GPIO_Pin; - /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */ - GPIOx->LCKR = tmp; - /* Read LCKK bit*/ - tmp = GPIOx->LCKR; - - if((uint32_t)(GPIOx->LCKR & GPIO_LCKR_LCKK)) - { - return HAL_OK; - } - else - { - return HAL_ERROR; - } -} - -/** - * @brief This function handles EXTI interrupt request. - * @param GPIO_Pin: Specifies the pins connected EXTI line - * @retval None - */ -void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin) -{ - /* EXTI line interrupt detected */ - if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET) - { - __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin); - HAL_GPIO_EXTI_Callback(GPIO_Pin); - } -} - -/** - * @brief EXTI line detection callback - * @param GPIO_Pin: Specifies the pins connected EXTI line - * @retval None - */ -__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(GPIO_Pin); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_GPIO_EXTI_Callback could be implemented in the user file - */ -} - -/** - * @} - */ - - -/** - * @} - */ - -#endif /* HAL_GPIO_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c deleted file mode 100644 index da0b4a5..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c +++ /dev/null @@ -1,145 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_gpio_ex.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief GPIO Extension HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the General Purpose Input/Output (GPIO) extension peripheral. - * + Extended features functions - * - @verbatim - ============================================================================== - ##### GPIO Peripheral extension features ##### - ============================================================================== - [..] GPIO module on STM32F1 family, manage also the AFIO register: - (+) Possibility to use the EVENTOUT Cortex feature - - ##### How to use this driver ##### - ============================================================================== - [..] This driver provides functions to use EVENTOUT Cortex feature - (#) Configure EVENTOUT Cortex feature using the function HAL_GPIOEx_ConfigEventout() - (#) Activate EVENTOUT Cortex feature using the HAL_GPIOEx_EnableEventout() - (#) Deactivate EVENTOUT Cortex feature using the HAL_GPIOEx_DisableEventout() - - @endverbatim - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup GPIOEx GPIOEx - * @brief GPIO HAL module driver - * @{ - */ - -#ifdef HAL_GPIO_MODULE_ENABLED - -/** @defgroup GPIOEx_Exported_Functions GPIOEx Exported Functions - * @{ - */ - -/** @defgroup GPIOEx_Exported_Functions_Group1 Extended features functions - * @brief Extended features functions - * -@verbatim - ============================================================================== - ##### Extended features functions ##### - ============================================================================== - [..] This section provides functions allowing to: - (+) Configure EVENTOUT Cortex feature using the function HAL_GPIOEx_ConfigEventout() - (+) Activate EVENTOUT Cortex feature using the HAL_GPIOEx_EnableEventout() - (+) Deactivate EVENTOUT Cortex feature using the HAL_GPIOEx_DisableEventout() - -@endverbatim - * @{ - */ - -/** - * @brief Configures the port and pin on which the EVENTOUT Cortex signal will be connected. - * @param GPIO_PortSource Select the port used to output the Cortex EVENTOUT signal. - * This parameter can be a value of @ref GPIOEx_EVENTOUT_PORT. - * @param GPIO_PinSource Select the pin used to output the Cortex EVENTOUT signal. - * This parameter can be a value of @ref GPIOEx_EVENTOUT_PIN. - * @retval None - */ -void HAL_GPIOEx_ConfigEventout(uint32_t GPIO_PortSource, uint32_t GPIO_PinSource) -{ - /* Verify the parameters */ - assert_param(IS_AFIO_EVENTOUT_PORT(GPIO_PortSource)); - assert_param(IS_AFIO_EVENTOUT_PIN(GPIO_PinSource)); - - /* Apply the new configuration */ - MODIFY_REG(AFIO->EVCR, (AFIO_EVCR_PORT)|(AFIO_EVCR_PIN), (GPIO_PortSource)|(GPIO_PinSource)); -} - -/** - * @brief Enables the Event Output. - * @retval None - */ -void HAL_GPIOEx_EnableEventout(void) -{ - SET_BIT(AFIO->EVCR, AFIO_EVCR_EVOE); -} - -/** - * @brief Disables the Event Output. - * @retval None - */ -void HAL_GPIOEx_DisableEventout(void) -{ - CLEAR_BIT(AFIO->EVCR, AFIO_EVCR_EVOE); -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_GPIO_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c deleted file mode 100644 index 42d38ae..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c +++ /dev/null @@ -1,1440 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_pcd.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief PCD HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the USB Peripheral Controller: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The PCD HAL driver can be used as follows: - - (#) Declare a PCD_HandleTypeDef handle structure, for example: - PCD_HandleTypeDef hpcd; - - (#) Fill parameters of Init structure in HCD handle - - (#) Call HAL_PCD_Init() API to initialize the HCD peripheral (Core, Device core, ...) - - (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API: - (##) Enable the PCD/USB Low Level interface clock using the following macro - (+++) __HAL_RCC_USB_CLK_ENABLE(); For USB Device FS peripheral available - on STM32F102xx and STM32F103xx devices - (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); For USB OTG FS peripheral available - on STM32F105xx and STM32F107xx devices - - (##) Initialize the related GPIO clocks - (##) Configure PCD pin-out - (##) Configure PCD NVIC interrupt - - (#)Associate the Upper USB device stack to the HAL PCD Driver: - (##) hpcd.pData = pdev; - - (#)Enable HCD transmission and reception: - (##) HAL_PCD_Start(); - - @endverbatim - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - - - -#ifdef HAL_PCD_MODULE_ENABLED - -#if defined(STM32F102x6) || defined(STM32F102xB) || \ - defined(STM32F103x6) || defined(STM32F103xB) || \ - defined(STM32F103xE) || defined(STM32F103xG) || \ - defined(STM32F105xC) || defined(STM32F107xC) - -/** @defgroup PCD PCD - * @brief PCD HAL module driver - * @{ - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PCD_Private_Macros PCD Private Macros - * @{ - */ -#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b)) -#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup PCD_Private_Functions PCD Private Functions - * @{ - */ -#if defined (USB_OTG_FS) -static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum); -#endif /* USB_OTG_FS */ - -#if defined (USB) -static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd); -#endif /* USB */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup PCD_Exported_Functions PCD Exported Functions - * @{ - */ - -/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This section provides functions allowing to: - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the PCD according to the specified - * parameters in the PCD_InitTypeDef and create the associated handle. - * @param hpcd: PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) -{ - uint32_t index = 0; - - /* Check the PCD handle allocation */ - if(hpcd == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance)); - - if(hpcd->State == HAL_PCD_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hpcd->Lock = HAL_UNLOCKED; - - /* Init the low level hardware : GPIO, CLOCK, NVIC... */ - HAL_PCD_MspInit(hpcd); - } - - hpcd->State = HAL_PCD_STATE_BUSY; - - /* Disable the Interrupts */ - __HAL_PCD_DISABLE(hpcd); - - /*Init the Core (common init.) */ - USB_CoreInit(hpcd->Instance, hpcd->Init); - - /* Force Device Mode*/ - USB_SetCurrentMode(hpcd->Instance , USB_DEVICE_MODE); - - /* Init endpoints structures */ - for (index = 0; index < 15 ; index++) - { - /* Init ep structure */ - hpcd->IN_ep[index].is_in = 1; - hpcd->IN_ep[index].num = index; - hpcd->IN_ep[index].tx_fifo_num = index; - /* Control until ep is actvated */ - hpcd->IN_ep[index].type = EP_TYPE_CTRL; - hpcd->IN_ep[index].maxpacket = 0; - hpcd->IN_ep[index].xfer_buff = 0; - hpcd->IN_ep[index].xfer_len = 0; - } - - for (index = 0; index < 15 ; index++) - { - hpcd->OUT_ep[index].is_in = 0; - hpcd->OUT_ep[index].num = index; - hpcd->IN_ep[index].tx_fifo_num = index; - /* Control until ep is activated */ - hpcd->OUT_ep[index].type = EP_TYPE_CTRL; - hpcd->OUT_ep[index].maxpacket = 0; - hpcd->OUT_ep[index].xfer_buff = 0; - hpcd->OUT_ep[index].xfer_len = 0; - } - - /* Init Device */ - USB_DevInit(hpcd->Instance, hpcd->Init); - - hpcd->USB_Address = 0; - hpcd->State= HAL_PCD_STATE_READY; - - USB_DevDisconnect (hpcd->Instance); - return HAL_OK; -} - -/** - * @brief DeInitializes the PCD peripheral - * @param hpcd: PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd) -{ - /* Check the PCD handle allocation */ - if(hpcd == NULL) - { - return HAL_ERROR; - } - - hpcd->State = HAL_PCD_STATE_BUSY; - - /* Stop Device */ - HAL_PCD_Stop(hpcd); - - /* DeInit the low level hardware */ - HAL_PCD_MspDeInit(hpcd); - - hpcd->State = HAL_PCD_STATE_RESET; - - return HAL_OK; -} - -/** - * @brief Initializes the PCD MSP. - * @param hpcd: PCD handle - * @retval None - */ -__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes PCD MSP. - * @param hpcd: PCD handle - * @retval None - */ -__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_MspDeInit could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup PCD_Exported_Functions_Group2 IO operation functions - * @brief Data transfers functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to manage the PCD data - transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Start The USB Device. - * @param hpcd: PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) -{ - __HAL_LOCK(hpcd); - HAL_PCDEx_SetConnectionState (hpcd, 1); - USB_DevConnect (hpcd->Instance); - __HAL_PCD_ENABLE(hpcd); - __HAL_UNLOCK(hpcd); - return HAL_OK; -} - -/** - * @brief Stop The USB Device. - * @param hpcd: PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) -{ - __HAL_LOCK(hpcd); - __HAL_PCD_DISABLE(hpcd); - USB_StopDevice(hpcd->Instance); - USB_DevDisconnect (hpcd->Instance); - __HAL_UNLOCK(hpcd); - return HAL_OK; -} - -#if defined (USB_OTG_FS) -/** - * @brief This function handles PCD interrupt request. - * @param hpcd: PCD handle - * @retval HAL status - */ -void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - uint32_t index = 0, ep_intr = 0, epint = 0, epnum = 0; - uint32_t fifoemptymsk = 0, temp = 0; - USB_OTG_EPTypeDef *ep = NULL; - - /* ensure that we are in device mode */ - if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE) - { - /* avoid spurious interrupt */ - if(__HAL_PCD_IS_INVALID_INTERRUPT(hpcd)) - { - return; - } - - if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS)) - { - /* incorrect mode, acknowledge the interrupt */ - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS); - } - - if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT)) - { - epnum = 0; - - /* Read in the device interrupt bits */ - ep_intr = USB_ReadDevAllOutEpInterrupt(hpcd->Instance); - - while ( ep_intr ) - { - if (ep_intr & 0x1) - { - epint = USB_ReadDevOutEPInterrupt(hpcd->Instance, epnum); - - if(( epint & USB_OTG_DOEPINT_XFRC) == USB_OTG_DOEPINT_XFRC) - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_XFRC); - - HAL_PCD_DataOutStageCallback(hpcd, epnum); - } - - if(( epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP) - { - /* Inform the upper layer that a setup packet is available */ - HAL_PCD_SetupStageCallback(hpcd); - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP); - } - - if(( epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS) - { - CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS); - } - } - epnum++; - ep_intr >>= 1; - } - } - - if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IEPINT)) - { - /* Read in the device interrupt bits */ - ep_intr = USB_ReadDevAllInEpInterrupt(hpcd->Instance); - - epnum = 0; - - while ( ep_intr ) - { - if (ep_intr & 0x1) /* In ITR */ - { - epint = USB_ReadDevInEPInterrupt(hpcd->Instance, epnum); - - if(( epint & USB_OTG_DIEPINT_XFRC) == USB_OTG_DIEPINT_XFRC) - { - fifoemptymsk = 0x1 << epnum; - USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; - - CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC); - - HAL_PCD_DataInStageCallback(hpcd, epnum); - } - if(( epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC) - { - CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_TOC); - } - if(( epint & USB_OTG_DIEPINT_ITTXFE) == USB_OTG_DIEPINT_ITTXFE) - { - CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_ITTXFE); - } - if(( epint & USB_OTG_DIEPINT_INEPNE) == USB_OTG_DIEPINT_INEPNE) - { - CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_INEPNE); - } - if(( epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD) - { - CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD); - } - if(( epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE) - { - PCD_WriteEmptyTxFifo(hpcd , epnum); - } - } - epnum++; - ep_intr >>= 1; - } - } - - /* Handle Resume Interrupt */ - if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT)) - { - /* Clear the Remote Wake-up signalling */ - USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; - - HAL_PCD_ResumeCallback(hpcd); - - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT); - } - - /* Handle Suspend Interrupt */ - if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP)) - { - if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) - { - - HAL_PCD_SuspendCallback(hpcd); - } - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP); - } - - /* Handle Reset Interrupt */ - if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST)) - { - USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; - USB_FlushTxFifo(hpcd->Instance , 0 ); - - for (index = 0; index < hpcd->Init.dev_endpoints ; index++) - { - USBx_INEP(index)->DIEPINT = 0xFF; - USBx_OUTEP(index)->DOEPINT = 0xFF; - } - USBx_DEVICE->DAINT = 0xFFFFFFFF; - USBx_DEVICE->DAINTMSK |= 0x10001; - - USBx_DEVICE->DOEPMSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM); - USBx_DEVICE->DIEPMSK |= (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM); - - /* Set Default Address to 0 */ - USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD; - - /* setup EP0 to receive SETUP packets */ - USB_EP0_OutStart(hpcd->Instance, (uint8_t *)hpcd->Setup); - - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST); - } - - /* Handle Enumeration done Interrupt */ - if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE)) - { - USB_ActivateSetup(hpcd->Instance); - hpcd->Instance->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT; - - hpcd->Init.speed = USB_OTG_SPEED_FULL; - hpcd->Init.ep0_mps = USB_OTG_FS_MAX_PACKET_SIZE ; - hpcd->Instance->GUSBCFG |= (uint32_t)((USBD_FS_TRDT_VALUE << 10) & USB_OTG_GUSBCFG_TRDT); - - HAL_PCD_ResetCallback(hpcd); - - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE); - } - - /* Handle RxQLevel Interrupt */ - if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL)) - { - USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); - temp = USBx->GRXSTSP; - ep = &hpcd->OUT_ep[temp & USB_OTG_GRXSTSP_EPNUM]; - - if(((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_DATA_UPDT) - { - if((temp & USB_OTG_GRXSTSP_BCNT) != 0) - { - USB_ReadPacket(USBx, ep->xfer_buff, (temp & USB_OTG_GRXSTSP_BCNT) >> 4); - ep->xfer_buff += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; - ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; - } - } - else if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_SETUP_UPDT) - { - USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8); - ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; - } - USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); - } - - /* Handle SOF Interrupt */ - if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF)) - { - HAL_PCD_SOFCallback(hpcd); - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF); - } - - /* Handle Incomplete ISO IN Interrupt */ - if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR)) - { - HAL_PCD_ISOINIncompleteCallback(hpcd, epnum); - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR); - } - - /* Handle Incomplete ISO OUT Interrupt */ - if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT)) - { - HAL_PCD_ISOOUTIncompleteCallback(hpcd, epnum); - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT); - } - - /* Handle Connection event Interrupt */ - if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT)) - { - HAL_PCD_ConnectCallback(hpcd); - __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT); - } - - /* Handle Disconnection event Interrupt */ - if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT)) - { - temp = hpcd->Instance->GOTGINT; - - if((temp & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET) - { - HAL_PCD_DisconnectCallback(hpcd); - } - hpcd->Instance->GOTGINT |= temp; - } - } -} -#endif /* USB_OTG_FS */ - -#if defined (USB) -/** - * @brief This function handles PCD interrupt request. - * @param hpcd: PCD handle - * @retval HAL status - */ -void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) -{ - uint32_t wInterrupt_Mask = 0; - - if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_CTR)) - { - /* servicing of the endpoint correct transfer interrupt */ - /* clear of the CTR flag into the sub */ - PCD_EP_ISR_Handler(hpcd); - } - - if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_RESET)) - { - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET); - HAL_PCD_ResetCallback(hpcd); - HAL_PCD_SetAddress(hpcd, 0); - } - - if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_PMAOVR)) - { - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_PMAOVR); - } - if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_ERR)) - { - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ERR); - } - - if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_WKUP)) - { - hpcd->Instance->CNTR &= ~(USB_CNTR_LP_MODE); - - /*set wInterrupt_Mask global variable*/ - wInterrupt_Mask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM \ - | USB_CNTR_ESOFM | USB_CNTR_RESETM; - - /*Set interrupt mask*/ - hpcd->Instance->CNTR = wInterrupt_Mask; - - HAL_PCD_ResumeCallback(hpcd); - - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_WKUP); - } - - if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_SUSP)) - { - /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SUSP); - - /* Force low-power mode in the macrocell */ - hpcd->Instance->CNTR |= USB_CNTR_FSUSP; - hpcd->Instance->CNTR |= USB_CNTR_LP_MODE; - if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_WKUP) == 0) - { - HAL_PCD_SuspendCallback(hpcd); - } - } - - if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_SOF)) - { - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SOF); - HAL_PCD_SOFCallback(hpcd); - } - - if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_ESOF)) - { - /* clear ESOF flag in ISTR */ - __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ESOF); - } -} -#endif /* USB */ - -/** - * @brief Data out stage callbacks - * @param hpcd: PCD handle - * @param epnum: endpoint number - * @retval None - */ - __weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(epnum); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_DataOutStageCallback could be implemented in the user file - */ -} - -/** - * @brief Data IN stage callbacks - * @param hpcd: PCD handle - * @param epnum: endpoint number - * @retval None - */ - __weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(epnum); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_DataInStageCallback could be implemented in the user file - */ -} -/** - * @brief Setup stage callback - * @param hpcd: PCD handle - * @retval None - */ - __weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_SetupStageCallback could be implemented in the user file - */ -} - -/** - * @brief USB Start Of Frame callbacks - * @param hpcd: PCD handle - * @retval None - */ - __weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_SOFCallback could be implemented in the user file - */ -} - -/** - * @brief USB Reset callbacks - * @param hpcd: PCD handle - * @retval None - */ - __weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ResetCallback could be implemented in the user file - */ -} - -/** - * @brief Suspend event callbacks - * @param hpcd: PCD handle - * @retval None - */ - __weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_SuspendCallback could be implemented in the user file - */ -} - -/** - * @brief Resume event callbacks - * @param hpcd: PCD handle - * @retval None - */ - __weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ResumeCallback could be implemented in the user file - */ -} - -/** - * @brief Incomplete ISO OUT callbacks - * @param hpcd: PCD handle - * @param epnum: endpoint number - * @retval None - */ - __weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(epnum); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file - */ -} - -/** - * @brief Incomplete ISO IN callbacks - * @param hpcd: PCD handle - * @param epnum: endpoint number - * @retval None - */ - __weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(epnum); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file - */ -} - -/** - * @brief Connection event callbacks - * @param hpcd: PCD handle - * @retval None - */ - __weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_ConnectCallback could be implemented in the user file - */ -} - -/** - * @brief Disconnection event callbacks - * @param hpcd: PCD handle - * @retval None - */ - __weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - /* NOTE : This function should not be modified, when the callback is needed, - the HAL_PCD_DisconnectCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions - * @brief management functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the PCD data - transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Connect the USB device - * @param hpcd: PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) -{ - __HAL_LOCK(hpcd); - HAL_PCDEx_SetConnectionState (hpcd, 1); - USB_DevConnect(hpcd->Instance); - __HAL_UNLOCK(hpcd); - return HAL_OK; -} - -/** - * @brief Disconnect the USB device - * @param hpcd: PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) -{ - __HAL_LOCK(hpcd); - HAL_PCDEx_SetConnectionState (hpcd, 0); - USB_DevDisconnect(hpcd->Instance); - __HAL_UNLOCK(hpcd); - return HAL_OK; -} - -/** - * @brief Set the USB Device address - * @param hpcd: PCD handle - * @param address: new device address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) -{ - __HAL_LOCK(hpcd); - hpcd->USB_Address = address; - USB_SetDevAddress(hpcd->Instance, address); - __HAL_UNLOCK(hpcd); - return HAL_OK; -} -/** - * @brief Open and configure an endpoint - * @param hpcd: PCD handle - * @param ep_addr: endpoint address - * @param ep_mps: endpoint max packet size - * @param ep_type: endpoint type - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type) -{ - HAL_StatusTypeDef ret = HAL_OK; - PCD_EPTypeDef *ep = NULL; - - if ((ep_addr & 0x80) == 0x80) - { - ep = &hpcd->IN_ep[ep_addr & 0x7F]; - } - else - { - ep = &hpcd->OUT_ep[ep_addr & 0x7F]; - } - ep->num = ep_addr & 0x7F; - - ep->is_in = (0x80 & ep_addr) != 0; - ep->maxpacket = ep_mps; - ep->type = ep_type; - - __HAL_LOCK(hpcd); - USB_ActivateEndpoint(hpcd->Instance , ep); - __HAL_UNLOCK(hpcd); - return ret; -} - -/** - * @brief Deactivate an endpoint - * @param hpcd: PCD handle - * @param ep_addr: endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - PCD_EPTypeDef *ep = NULL; - - if ((ep_addr & 0x80) == 0x80) - { - ep = &hpcd->IN_ep[ep_addr & 0x7F]; - } - else - { - ep = &hpcd->OUT_ep[ep_addr & 0x7F]; - } - ep->num = ep_addr & 0x7F; - - ep->is_in = (0x80 & ep_addr) != 0; - - __HAL_LOCK(hpcd); - USB_DeactivateEndpoint(hpcd->Instance , ep); - __HAL_UNLOCK(hpcd); - return HAL_OK; -} - - -/** - * @brief Receive an amount of data - * @param hpcd: PCD handle - * @param ep_addr: endpoint address - * @param pBuf: pointer to the reception buffer - * @param len: amount of data to be received - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) -{ - PCD_EPTypeDef *ep = NULL; - - ep = &hpcd->OUT_ep[ep_addr & 0x7F]; - - /*setup and start the Xfer */ - ep->xfer_buff = pBuf; - ep->xfer_len = len; - ep->xfer_count = 0; - ep->is_in = 0; - ep->num = ep_addr & 0x7F; - - __HAL_LOCK(hpcd); - - if ((ep_addr & 0x7F) == 0 ) - { - USB_EP0StartXfer(hpcd->Instance , ep); - } - else - { - USB_EPStartXfer(hpcd->Instance , ep); - } - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Get Received Data Size - * @param hpcd: PCD handle - * @param ep_addr: endpoint address - * @retval Data Size - */ -uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - return hpcd->OUT_ep[ep_addr & 0x7F].xfer_count; -} -/** - * @brief Send an amount of data - * @param hpcd: PCD handle - * @param ep_addr: endpoint address - * @param pBuf: pointer to the transmission buffer - * @param len: amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) -{ - PCD_EPTypeDef *ep = NULL; - - ep = &hpcd->IN_ep[ep_addr & 0x7F]; - - /*setup and start the Xfer */ - ep->xfer_buff = pBuf; - ep->xfer_len = len; - ep->xfer_count = 0; - ep->is_in = 1; - ep->num = ep_addr & 0x7F; - - __HAL_LOCK(hpcd); - - if ((ep_addr & 0x7F) == 0 ) - { - USB_EP0StartXfer(hpcd->Instance , ep); - } - else - { - USB_EPStartXfer(hpcd->Instance , ep); - } - - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Set a STALL condition over an endpoint - * @param hpcd: PCD handle - * @param ep_addr: endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - PCD_EPTypeDef *ep = NULL; - - if ((0x80 & ep_addr) == 0x80) - { - ep = &hpcd->IN_ep[ep_addr & 0x7F]; - } - else - { - ep = &hpcd->OUT_ep[ep_addr]; - } - - ep->is_stall = 1; - ep->num = ep_addr & 0x7F; - ep->is_in = ((ep_addr & 0x80) == 0x80); - - __HAL_LOCK(hpcd); - USB_EPSetStall(hpcd->Instance , ep); - if((ep_addr & 0x7F) == 0) - { - USB_EP0_OutStart(hpcd->Instance, (uint8_t *)hpcd->Setup); - } - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Clear a STALL condition over in an endpoint - * @param hpcd: PCD handle - * @param ep_addr: endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - PCD_EPTypeDef *ep = NULL; - - if ((0x80 & ep_addr) == 0x80) - { - ep = &hpcd->IN_ep[ep_addr & 0x7F]; - } - else - { - ep = &hpcd->OUT_ep[ep_addr]; - } - - ep->is_stall = 0; - ep->num = ep_addr & 0x7F; - ep->is_in = ((ep_addr & 0x80) == 0x80); - - __HAL_LOCK(hpcd); - USB_EPClearStall(hpcd->Instance , ep); - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief Flush an endpoint - * @param hpcd: PCD handle - * @param ep_addr: endpoint address - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) -{ - __HAL_LOCK(hpcd); - - if ((ep_addr & 0x80) == 0x80) - { - USB_FlushTxFifo(hpcd->Instance, ep_addr & 0x7F); - } - else - { - USB_FlushRxFifo(hpcd->Instance); - } - - __HAL_UNLOCK(hpcd); - - return HAL_OK; -} - -/** - * @brief HAL_PCD_ActivateRemoteWakeup : active remote wakeup signalling - * @param hpcd: PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) -{ - return(USB_ActivateRemoteWakeup(hpcd->Instance)); -} - -/** - * @brief HAL_PCD_DeActivateRemoteWakeup : de-active remote wakeup signalling - * @param hpcd: PCD handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) -{ - return(USB_DeActivateRemoteWakeup(hpcd->Instance)); -} -/** - * @} - */ - -/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions - * @brief Peripheral State functions - * -@verbatim - =============================================================================== - ##### Peripheral State functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the PCD state - * @param hpcd: PCD handle - * @retval HAL state - */ -PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd) -{ - return hpcd->State; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup PCD_Private_Functions - * @{ - */ -#if defined (USB_OTG_FS) -/** - * @brief DCD_WriteEmptyTxFifo - * check FIFO for the next packet to be loaded - * @param hpcd: PCD handle - * @param epnum : endpoint number - * This parameter can be a value from 0 to 15 - * @retval HAL status - */ -static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum) -{ - USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; - USB_OTG_EPTypeDef *ep = NULL; - int32_t len = 0; - uint32_t len32b = 0; - uint32_t fifoemptymsk = 0; - - ep = &hpcd->IN_ep[epnum]; - len = ep->xfer_len - ep->xfer_count; - - if (len > ep->maxpacket) - { - len = ep->maxpacket; - } - - len32b = (len + 3) / 4; - - while ((USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) > len32b && - ep->xfer_count < ep->xfer_len && - ep->xfer_len != 0) - { - /* Write the FIFO */ - len = ep->xfer_len - ep->xfer_count; - - if (len > ep->maxpacket) - { - len = ep->maxpacket; - } - len32b = (len + 3) / 4; - - USB_WritePacket(USBx, ep->xfer_buff, epnum, len); - - ep->xfer_buff += len; - ep->xfer_count += len; - } - - if(len <= 0) - { - fifoemptymsk = 0x1 << epnum; - USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; - - } - - return HAL_OK; -} -#endif /* USB_OTG_FS */ - -#if defined (USB) -/** - * @brief This function handles PCD Endpoint interrupt request. - * @param hpcd: PCD handle - * @retval HAL status - */ -static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) -{ - PCD_EPTypeDef *ep = NULL; - uint16_t count = 0; - uint8_t epindex = 0; - __IO uint16_t wIstr = 0; - __IO uint16_t wEPVal = 0; - - /* stay in loop while pending interrupts */ - while (((wIstr = hpcd->Instance->ISTR) & USB_ISTR_CTR) != 0) - { - /* extract highest priority endpoint number */ - epindex = (uint8_t)(wIstr & USB_ISTR_EP_ID); - - if (epindex == 0) - { - /* Decode and service control endpoint interrupt */ - - /* DIR bit = origin of the interrupt */ - if ((wIstr & USB_ISTR_DIR) == 0) - { - /* DIR = 0 */ - - /* DIR = 0 => IN int */ - /* DIR = 0 implies that (EP_CTR_TX = 1) always */ - PCD_CLEAR_TX_EP_CTR(hpcd->Instance, PCD_ENDP0); - ep = &hpcd->IN_ep[0]; - - ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); - ep->xfer_buff += ep->xfer_count; - - /* TX COMPLETE */ - HAL_PCD_DataInStageCallback(hpcd, 0); - - - if((hpcd->USB_Address > 0)&& ( ep->xfer_len == 0)) - { - hpcd->Instance->DADDR = (hpcd->USB_Address | USB_DADDR_EF); - hpcd->USB_Address = 0; - } - - } - else - { - /* DIR = 1 */ - - /* DIR = 1 & CTR_RX => SETUP or OUT int */ - /* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */ - ep = &hpcd->OUT_ep[0]; - wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0); - - if ((wEPVal & USB_EP_SETUP) != 0) - { - /* Get SETUP Packet*/ - ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); - USB_ReadPMA(hpcd->Instance, (uint8_t*)hpcd->Setup ,ep->pmaadress , ep->xfer_count); - /* SETUP bit kept frozen while CTR_RX = 1*/ - PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); - - /* Process SETUP Packet*/ - HAL_PCD_SetupStageCallback(hpcd); - } - - else if ((wEPVal & USB_EP_CTR_RX) != 0) - { - PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); - /* Get Control Data OUT Packet*/ - ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); - - if (ep->xfer_count != 0) - { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, ep->xfer_count); - ep->xfer_buff+=ep->xfer_count; - } - - /* Process Control Data OUT Packet*/ - HAL_PCD_DataOutStageCallback(hpcd, 0); - - PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket); - PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID); - } - } - } - else - { - /* Decode and service non control endpoints interrupt */ - - /* process related endpoint register */ - wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, epindex); - if ((wEPVal & USB_EP_CTR_RX) != 0) - { - /* clear int flag */ - PCD_CLEAR_RX_EP_CTR(hpcd->Instance, epindex); - ep = &hpcd->OUT_ep[epindex]; - - /* OUT double Buffering*/ - if (ep->doublebuffer == 0) - { - count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); - if (count != 0) - { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, count); - } - } - else - { - if (PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_RX) - { - /*read from endpoint BUF0Addr buffer*/ - count = PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); - if (count != 0) - { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); - } - } - else - { - /*read from endpoint BUF1Addr buffer*/ - count = PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); - if (count != 0) - { - USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); - } - } - PCD_FreeUserBuffer(hpcd->Instance, ep->num, PCD_EP_DBUF_OUT); - } - /*multi-packet on the NON control OUT endpoint*/ - ep->xfer_count+=count; - ep->xfer_buff+=count; - - if ((ep->xfer_len == 0) || (count < ep->maxpacket)) - { - /* RX COMPLETE */ - HAL_PCD_DataOutStageCallback(hpcd, ep->num); - } - else - { - HAL_PCD_EP_Receive(hpcd, ep->num, ep->xfer_buff, ep->xfer_len); - } - - } /* if((wEPVal & EP_CTR_RX) */ - - if ((wEPVal & USB_EP_CTR_TX) != 0) - { - ep = &hpcd->IN_ep[epindex]; - - /* clear int flag */ - PCD_CLEAR_TX_EP_CTR(hpcd->Instance, epindex); - - /* IN double Buffering*/ - if (ep->doublebuffer == 0) - { - ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); - if (ep->xfer_count != 0) - { - USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, ep->xfer_count); - } - } - else - { - if (PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_TX) - { - /*read from endpoint BUF0Addr buffer*/ - ep->xfer_count = PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); - if (ep->xfer_count != 0) - { - USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, ep->xfer_count); - } - } - else - { - /*read from endpoint BUF1Addr buffer*/ - ep->xfer_count = PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); - if (ep->xfer_count != 0) - { - USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, ep->xfer_count); - } - } - PCD_FreeUserBuffer(hpcd->Instance, ep->num, PCD_EP_DBUF_IN); - } - /*multi-packet on the NON control IN endpoint*/ - ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); - ep->xfer_buff+=ep->xfer_count; - - /* Zero Length Packet? */ - if (ep->xfer_len == 0) - { - /* TX COMPLETE */ - HAL_PCD_DataInStageCallback(hpcd, ep->num); - } - else - { - HAL_PCD_EP_Transmit(hpcd, ep->num, ep->xfer_buff, ep->xfer_len); - } - } - } - } - return HAL_OK; -} -#endif /* USB */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F102x6 || STM32F102xB || */ - /* STM32F103x6 || STM32F103xB || */ - /* STM32F103xE || STM32F103xG || */ - /* STM32F105xC || STM32F107xC */ - -#endif /* HAL_PCD_MODULE_ENABLED */ - - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c deleted file mode 100644 index 5f3002d..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c +++ /dev/null @@ -1,252 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_pcd_ex.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Extended PCD HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the USB Peripheral Controller: - * + Extended features functions: Update FIFO configuration, - * PMA configuration for EPs - * - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -#ifdef HAL_PCD_MODULE_ENABLED - -#if defined(STM32F102x6) || defined(STM32F102xB) || \ - defined(STM32F103x6) || defined(STM32F103xB) || \ - defined(STM32F103xE) || defined(STM32F103xG) || \ - defined(STM32F105xC) || defined(STM32F107xC) - - -/** @defgroup PCDEx PCDEx - * @brief PCD Extended HAL module driver - * @{ - */ - - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions - * @{ - */ - -/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions - * @brief PCDEx control functions - * -@verbatim - =============================================================================== - ##### Extended Peripheral Control functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Update FIFO (USB_OTG_FS) - (+) Update PMA configuration (USB) - -@endverbatim - * @{ - */ - -#if defined (USB_OTG_FS) -/** - * @brief Set Tx FIFO - * @param hpcd: PCD handle - * @param fifo: The number of Tx fifo - * @param size: Fifo size - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size) -{ - uint8_t index = 0; - uint32_t Tx_Offset = 0; - - /* TXn min size = 16 words. (n : Transmit FIFO index) - When a TxFIFO is not used, the Configuration should be as follows: - case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes) - --> Txm can use the space allocated for Txn. - case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes) - --> Txn should be configured with the minimum space of 16 words - The FIFO is used optimally when used TxFIFOs are allocated in the top - of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones. - When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */ - - Tx_Offset = hpcd->Instance->GRXFSIZ; - - if(fifo == 0) - { - hpcd->Instance->DIEPTXF0_HNPTXFSIZ = (size << 16) | Tx_Offset; - } - else - { - Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16; - for (index = 0; index < (fifo - 1); index++) - { - Tx_Offset += (hpcd->Instance->DIEPTXF[index] >> 16); - } - - /* Multiply Tx_Size by 2 to get higher performance */ - hpcd->Instance->DIEPTXF[fifo - 1] = (size << 16) | Tx_Offset; - - } - - return HAL_OK; -} - -/** - * @brief Set Rx FIFO - * @param hpcd: PCD handle - * @param size: Size of Rx fifo - * @retval HAL status - */ -HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size) -{ - hpcd->Instance->GRXFSIZ = size; - return HAL_OK; -} -#endif /* USB_OTG_FS */ - -#if defined (USB) -/** - * @brief Configure PMA for EP - * @param hpcd : Device instance - * @param ep_addr: endpoint address - * @param ep_kind: endpoint Kind - * USB_SNG_BUF: Single Buffer used - * USB_DBL_BUF: Double Buffer used - * @param pmaadress: EP address in The PMA: In case of single buffer endpoint - * this parameter is 16-bit value providing the address - * in PMA allocated to endpoint. - * In case of double buffer endpoint this parameter - * is a 32-bit value providing the endpoint buffer 0 address - * in the LSB part of 32-bit value and endpoint buffer 1 address - * in the MSB part of 32-bit value. - * @retval HAL status - */ - -HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, - uint16_t ep_addr, - uint16_t ep_kind, - uint32_t pmaadress) - -{ - PCD_EPTypeDef *ep = NULL; - - /* initialize ep structure*/ - if ((0x80 & ep_addr) == 0x80) - { - ep = &hpcd->IN_ep[ep_addr & 0x7F]; - } - else - { - ep = &hpcd->OUT_ep[ep_addr]; - } - - /* Here we check if the endpoint is single or double Buffer*/ - if (ep_kind == PCD_SNG_BUF) - { - /*Single Buffer*/ - ep->doublebuffer = 0; - /*Configure te PMA*/ - ep->pmaadress = (uint16_t)pmaadress; - } - else /*USB_DBL_BUF*/ - { - /*Double Buffer Endpoint*/ - ep->doublebuffer = 1; - /*Configure the PMA*/ - ep->pmaaddr0 = pmaadress & 0xFFFF; - ep->pmaaddr1 = (pmaadress & 0xFFFF0000) >> 16; - } - - return HAL_OK; -} -#endif /* USB */ -/** - * @} - */ - -/** @defgroup PCDEx_Exported_Functions_Group2 Peripheral State functions - * @brief Manage device connection state - * @{ - */ -/** - * @brief Software Device Connection, - * this function is not required by USB OTG FS peripheral, it is used - * only by USB Device FS peripheral. - * @param hpcd: PCD handle - * @param state: connection state (0 : disconnected / 1: connected) - * @retval None - */ -__weak void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hpcd); - UNUSED(state); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_PCDEx_SetConnectionState could be implemented in the user file - */ -} -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F102x6 || STM32F102xB || */ - /* STM32F103x6 || STM32F103xB || */ - /* STM32F103xE || STM32F103xG || */ - /* STM32F105xC || STM32F107xC */ - -#endif /* HAL_PCD_MODULE_ENABLED */ - - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c deleted file mode 100644 index bf00707..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c +++ /dev/null @@ -1,636 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_pwr.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief PWR HAL module driver. - * - * This file provides firmware functions to manage the following - * functionalities of the Power Controller (PWR) peripheral: - * + Initialization/de-initialization functions - * + Peripheral Control functions - * - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup PWR PWR - * @brief PWR HAL module driver - * @{ - */ - -#ifdef HAL_PWR_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/** @defgroup PWR_Private_Constants PWR Private Constants - * @{ - */ - -/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask - * @{ - */ -#define PVD_MODE_IT ((uint32_t)0x00010000) -#define PVD_MODE_EVT ((uint32_t)0x00020000) -#define PVD_RISING_EDGE ((uint32_t)0x00000001) -#define PVD_FALLING_EDGE ((uint32_t)0x00000002) -/** - * @} - */ - - -/** @defgroup PWR_register_alias_address PWR Register alias address - * @{ - */ -/* ------------- PWR registers bit address in the alias region ---------------*/ -#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) -#define PWR_CR_OFFSET 0x00 -#define PWR_CSR_OFFSET 0x04 -#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET) -#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET) -/** - * @} - */ - -/** @defgroup PWR_CR_register_alias PWR CR Register alias address - * @{ - */ -/* --- CR Register ---*/ -/* Alias word address of LPSDSR bit */ -#define LPSDSR_BIT_NUMBER POSITION_VAL(PWR_CR_LPDS) -#define CR_LPSDSR_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (LPSDSR_BIT_NUMBER * 4))) - -/* Alias word address of DBP bit */ -#define DBP_BIT_NUMBER POSITION_VAL(PWR_CR_DBP) -#define CR_DBP_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (DBP_BIT_NUMBER * 4))) - -/* Alias word address of PVDE bit */ -#define PVDE_BIT_NUMBER POSITION_VAL(PWR_CR_PVDE) -#define CR_PVDE_BB ((uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (PVDE_BIT_NUMBER * 4))) - -/** - * @} - */ - -/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address - * @{ - */ - -/* --- CSR Register ---*/ -/* Alias word address of EWUP1 bit */ -#define CSR_EWUP_BB(VAL) ((uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32) + (POSITION_VAL(VAL) * 4))) -/** - * @} - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup PWR_Private_Functions PWR Private Functions - * brief WFE cortex command overloaded for HAL_PWR_EnterSTOPMode usage only (see Workaround section) - * @{ - */ -static void PWR_OverloadWfe(void); - -/* Private functions ---------------------------------------------------------*/ -__NOINLINE -static void PWR_OverloadWfe(void) -{ - __asm volatile( "wfe" ); - __asm volatile( "nop" ); -} - -/** - * @} - */ - - -/** @defgroup PWR_Exported_Functions PWR Exported Functions - * @{ - */ - -/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and de-initialization functions - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - After reset, the backup domain (RTC registers, RTC backup data - registers) is protected against possible unwanted - write accesses. - To enable access to the RTC Domain and RTC registers, proceed as follows: - (+) Enable the Power Controller (PWR) APB1 interface clock using the - __HAL_RCC_PWR_CLK_ENABLE() macro. - (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function. - -@endverbatim - * @{ - */ - -/** - * @brief Deinitializes the PWR peripheral registers to their default reset values. - * @retval None - */ -void HAL_PWR_DeInit(void) -{ - __HAL_RCC_PWR_FORCE_RESET(); - __HAL_RCC_PWR_RELEASE_RESET(); -} - -/** - * @brief Enables access to the backup domain (RTC registers, RTC - * backup data registers ). - * @note If the HSE divided by 128 is used as the RTC clock, the - * Backup Domain Access should be kept enabled. - * @retval None - */ -void HAL_PWR_EnableBkUpAccess(void) -{ - /* Enable access to RTC and backup registers */ - *(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables access to the backup domain (RTC registers, RTC - * backup data registers). - * @note If the HSE divided by 128 is used as the RTC clock, the - * Backup Domain Access should be kept enabled. - * @retval None - */ -void HAL_PWR_DisableBkUpAccess(void) -{ - /* Disable access to RTC and backup registers */ - *(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE; -} - -/** - * @} - */ - -/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions - * @brief Low Power modes configuration functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - - *** PVD configuration *** - ========================= - [..] - (+) The PVD is used to monitor the VDD power supply by comparing it to a - threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR). - - (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower - than the PVD threshold. This event is internally connected to the EXTI - line16 and can generate an interrupt if enabled. This is done through - __HAL_PVD_EXTI_ENABLE_IT() macro. - (+) The PVD is stopped in Standby mode. - - *** WakeUp pin configuration *** - ================================ - [..] - (+) WakeUp pin is used to wake up the system from Standby mode. This pin is - forced in input pull-down configuration and is active on rising edges. - (+) There is one WakeUp pin: - WakeUp Pin 1 on PA.00. - - [..] - - *** Low Power modes configuration *** - ===================================== - [..] - The device features 3 low-power modes: - (+) Sleep mode: CPU clock off, all peripherals including Cortex-M3 core peripherals like - NVIC, SysTick, etc. are kept running - (+) Stop mode: All clocks are stopped - (+) Standby mode: 1.8V domain powered off - - - *** Sleep mode *** - ================== - [..] - (+) Entry: - The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFx) - functions with - (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction - (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction - - (+) Exit: - (++) WFI entry mode, Any peripheral interrupt acknowledged by the nested vectored interrupt - controller (NVIC) can wake up the device from Sleep mode. - (++) WFE entry mode, Any wakeup event can wake up the device from Sleep mode. - (+++) Any peripheral interrupt w/o NVIC configuration & SEVONPEND bit set in the Cortex (HAL_PWR_EnableSEVOnPend) - (+++) Any EXTI Line (Internal or External) configured in Event mode - - *** Stop mode *** - ================= - [..] - The Stop mode is based on the Cortex-M3 deepsleep mode combined with peripheral - clock gating. The voltage regulator can be configured either in normal or low-power mode. - In Stop mode, all clocks in the 1.8 V domain are stopped, the PLL, the HSI and the HSE RC - oscillators are disabled. SRAM and register contents are preserved. - In Stop mode, all I/O pins keep the same state as in Run mode. - - (+) Entry: - The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_REGULATOR_VALUE, PWR_SLEEPENTRY_WFx ) - function with: - (++) PWR_REGULATOR_VALUE= PWR_MAINREGULATOR_ON: Main regulator ON. - (++) PWR_REGULATOR_VALUE= PWR_LOWPOWERREGULATOR_ON: Low Power regulator ON. - (++) PWR_SLEEPENTRY_WFx= PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction - (++) PWR_SLEEPENTRY_WFx= PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction - (+) Exit: - (++) WFI entry mode, Any EXTI Line (Internal or External) configured in Interrupt mode with NVIC configured - (++) WFE entry mode, Any EXTI Line (Internal or External) configured in Event mode. - - *** Standby mode *** - ==================== - [..] - The Standby mode allows to achieve the lowest power consumption. It is based on the - Cortex-M3 deepsleep mode, with the voltage regulator disabled. The 1.8 V domain is - consequently powered off. The PLL, the HSI oscillator and the HSE oscillator are also - switched off. SRAM and register contents are lost except for registers in the Backup domain - and Standby circuitry - - (+) Entry: - (++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function. - (+) Exit: - (++) WKUP pin rising edge, RTC alarm event rising edge, external Reset in - NRSTpin, IWDG Reset - - *** Auto-wakeup (AWU) from low-power mode *** - ============================================= - [..] - - (+) The MCU can be woken up from low-power mode by an RTC Alarm event, - without depending on an external interrupt (Auto-wakeup mode). - - (+) RTC auto-wakeup (AWU) from the Stop and Standby modes - - (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to - configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function. - - *** PWR Workarounds linked to Silicon Limitation *** - ==================================================== - [..] - Below the list of all silicon limitations known on STM32F1xx prouct. - - (#)Workarounds Implemented inside PWR HAL Driver - (##)Debugging Stop mode with WFE entry - overloaded the WFE by an internal function - -@endverbatim - * @{ - */ - -/** - * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). - * @param sConfigPVD: pointer to an PWR_PVDTypeDef structure that contains the configuration - * information for the PVD. - * @note Refer to the electrical characteristics of your device datasheet for - * more details about the voltage threshold corresponding to each - * detection level. - * @retval None - */ -void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD) -{ - /* Check the parameters */ - assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel)); - assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode)); - - /* Set PLS[7:5] bits according to PVDLevel value */ - MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel); - - /* Clear any previous config. Keep it clear if no event or IT mode is selected */ - __HAL_PWR_PVD_EXTI_DISABLE_EVENT(); - __HAL_PWR_PVD_EXTI_DISABLE_IT(); - __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); - __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE(); - - /* Configure interrupt mode */ - if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT) - { - __HAL_PWR_PVD_EXTI_ENABLE_IT(); - } - - /* Configure event mode */ - if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT) - { - __HAL_PWR_PVD_EXTI_ENABLE_EVENT(); - } - - /* Configure the edge */ - if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE) - { - __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE(); - } - - if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE) - { - __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); - } -} - -/** - * @brief Enables the Power Voltage Detector(PVD). - * @retval None - */ -void HAL_PWR_EnablePVD(void) -{ - /* Enable the power voltage detector */ - *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables the Power Voltage Detector(PVD). - * @retval None - */ -void HAL_PWR_DisablePVD(void) -{ - /* Disable the power voltage detector */ - *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE; -} - -/** - * @brief Enables the WakeUp PINx functionality. - * @param WakeUpPinx: Specifies the Power Wake-Up pin to enable. - * This parameter can be one of the following values: - * @arg PWR_WAKEUP_PIN1 - * @retval None - */ -void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx) -{ - /* Check the parameter */ - assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); - /* Enable the EWUPx pin */ - *(__IO uint32_t *) CSR_EWUP_BB(WakeUpPinx) = (uint32_t)ENABLE; -} - -/** - * @brief Disables the WakeUp PINx functionality. - * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable. - * This parameter can be one of the following values: - * @arg PWR_WAKEUP_PIN1 - * @retval None - */ -void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx) -{ - /* Check the parameter */ - assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx)); - /* Disable the EWUPx pin */ - *(__IO uint32_t *) CSR_EWUP_BB(WakeUpPinx) = (uint32_t)DISABLE; -} - -/** - * @brief Enters Sleep mode. - * @note In Sleep mode, all I/O pins keep the same state as in Run mode. - * @param Regulator: Regulator state as no effect in SLEEP mode - allows to support portability from legacy software - * @param SLEEPEntry: Specifies if SLEEP mode is entered with WFI or WFE instruction. - * When WFI entry is used, tick interrupt have to be disabled if not desired as - * the interrupt wake up source. - * This parameter can be one of the following values: - * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction - * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction - * @retval None - */ -void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry) -{ - /* Check the parameters */ - /* No check on Regulator because parameter not used in SLEEP mode */ - assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry)); - - /* Clear SLEEPDEEP bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - - /* Select SLEEP mode entry -------------------------------------------------*/ - if(SLEEPEntry == PWR_SLEEPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __SEV(); - __WFE(); - __WFE(); - } -} - -/** - * @brief Enters Stop mode. - * @note In Stop mode, all I/O pins keep the same state as in Run mode. - * @note When exiting Stop mode by using an interrupt or a wakeup event, - * HSI RC oscillator is selected as system clock. - * @note When the voltage regulator operates in low power mode, an additional - * startup delay is incurred when waking up from Stop mode. - * By keeping the internal regulator ON during Stop mode, the consumption - * is higher although the startup time is reduced. - * @param Regulator: Specifies the regulator state in Stop mode. - * This parameter can be one of the following values: - * @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON - * @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON - * @param STOPEntry: Specifies if Stop mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction - * @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction - * @retval None - */ -void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry) -{ - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR(Regulator)); - assert_param(IS_PWR_STOP_ENTRY(STOPEntry)); - - /* Clear PDDS bit in PWR register to specify entering in STOP mode when CPU enter in Deepsleep */ - CLEAR_BIT(PWR->CR, PWR_CR_PDDS); - - /* Select the voltage regulator mode by setting LPDS bit in PWR register according to Regulator parameter value */ - MODIFY_REG(PWR->CR, PWR_CR_LPDS, Regulator); - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - - /* Select Stop mode entry --------------------------------------------------*/ - if(STOPEntry == PWR_STOPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __SEV(); - PWR_OverloadWfe(); /* WFE redefine locally */ - PWR_OverloadWfe(); /* WFE redefine locally */ - } - /* Reset SLEEPDEEP bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); -} - -/** - * @brief Enters Standby mode. - * @note In Standby mode, all I/O pins are high impedance except for: - * - Reset pad (still available) - * - TAMPER pin if configured for tamper or calibration out. - * - WKUP pin (PA0) if enabled. - * @retval None - */ -void HAL_PWR_EnterSTANDBYMode(void) -{ - /* Select Standby mode */ - SET_BIT(PWR->CR, PWR_CR_PDDS); - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - - /* This option is used to ensure that store operations are completed */ -#if defined ( __CC_ARM) - __force_stores(); -#endif - /* Request Wait For Interrupt */ - __WFI(); -} - - -/** - * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode. - * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor - * re-enters SLEEP mode when an interruption handling is over. - * Setting this bit is useful when the processor is expected to run only on - * interruptions handling. - * @retval None - */ -void HAL_PWR_EnableSleepOnExit(void) -{ - /* Set SLEEPONEXIT bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); -} - - -/** - * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode. - * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor - * re-enters SLEEP mode when an interruption handling is over. - * @retval None - */ -void HAL_PWR_DisableSleepOnExit(void) -{ - /* Clear SLEEPONEXIT bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk)); -} - - -/** - * @brief Enables CORTEX M3 SEVONPEND bit. - * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes - * WFE to wake up when an interrupt moves from inactive to pended. - * @retval None - */ -void HAL_PWR_EnableSEVOnPend(void) -{ - /* Set SEVONPEND bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); -} - - -/** - * @brief Disables CORTEX M3 SEVONPEND bit. - * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes - * WFE to wake up when an interrupt moves from inactive to pended. - * @retval None - */ -void HAL_PWR_DisableSEVOnPend(void) -{ - /* Clear SEVONPEND bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk)); -} - - - -/** - * @brief This function handles the PWR PVD interrupt request. - * @note This API should be called under the PVD_IRQHandler(). - * @retval None - */ -void HAL_PWR_PVD_IRQHandler(void) -{ - /* Check PWR exti flag */ - if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET) - { - /* PWR PVD interrupt user callback */ - HAL_PWR_PVDCallback(); - - /* Clear PWR Exti pending bit */ - __HAL_PWR_PVD_EXTI_CLEAR_FLAG(); - } -} - -/** - * @brief PWR PVD interrupt callback - * @retval None - */ -__weak void HAL_PWR_PVDCallback(void) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_PWR_PVDCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_PWR_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c deleted file mode 100644 index e23f65c..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c +++ /dev/null @@ -1,1270 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_rcc.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief RCC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Reset and Clock Control (RCC) peripheral: - * + Initialization and de-initialization functions - * + Peripheral Control functions - * - @verbatim - ============================================================================== - ##### RCC specific features ##### - ============================================================================== - [..] - After reset the device is running from Internal High Speed oscillator - (HSI 8MHz) with Flash 0 wait state, Flash prefetch buffer is enabled, - and all peripherals are off except internal SRAM, Flash and JTAG. - (+) There is no prescaler on High speed (AHB) and Low speed (APB) buses; - all peripherals mapped on these buses are running at HSI speed. - (+) The clock for all peripherals is switched off, except the SRAM and FLASH. - (+) All GPIOs are in input floating state, except the JTAG pins which - are assigned to be used for debug purpose. - [..] Once the device started from reset, the user application has to: - (+) Configure the clock source to be used to drive the System clock - (if the application needs higher frequency/performance) - (+) Configure the System clock frequency and Flash settings - (+) Configure the AHB and APB buses prescalers - (+) Enable the clock for the peripheral(s) to be used - (+) Configure the clock source(s) for peripherals whose clocks are not - derived from the System clock (I2S, RTC, ADC, USB OTG FS) - - ##### RCC Limitations ##### - ============================================================================== - [..] - A delay between an RCC peripheral clock enable and the effective peripheral - enabling should be taken into account in order to manage the peripheral read/write - from/to registers. - (+) This delay depends on the peripheral mapping. - (++) AHB & APB peripherals, 1 dummy read is necessary - - [..] - Workarounds: - (#) For AHB & APB peripherals, a dummy read to the peripheral register has been - inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro. - - @endverbatim - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** -*/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup RCC RCC -* @brief RCC HAL module driver - * @{ - */ - -#ifdef HAL_RCC_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup RCC_Private_Constants RCC Private Constants - * @{ - */ -/* Bits position in in the CFGR register */ -#define RCC_CFGR_HPRE_BITNUMBER POSITION_VAL(RCC_CFGR_HPRE) -#define RCC_CFGR_PPRE1_BITNUMBER POSITION_VAL(RCC_CFGR_PPRE1) -#define RCC_CFGR_PPRE2_BITNUMBER POSITION_VAL(RCC_CFGR_PPRE2) -/** - * @} - */ -/* Private macro -------------------------------------------------------------*/ -/** @defgroup RCC_Private_Macros RCC Private Macros - * @{ - */ - -#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() -#define MCO1_GPIO_PORT GPIOA -#define MCO1_PIN GPIO_PIN_8 - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup RCC_Private_Variables RCC Private Variables - * @{ - */ -/** - * @} - */ - -/* Private function prototypes -----------------------------------------------*/ -/* Exported functions ---------------------------------------------------------*/ - -/** @defgroup RCC_Exported_Functions RCC Exported Functions - * @{ - */ - -/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * - @verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] - This section provides functions allowing to configure the internal/external oscillators - (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB, APB1 - and APB2). - - [..] Internal/external clock and PLL configuration - (#) HSI (high-speed internal), 8 MHz factory-trimmed RC used directly or through - the PLL as System clock source. - (#) LSI (low-speed internal), ~40 KHz low consumption RC used as IWDG and/or RTC - clock source. - - (#) HSE (high-speed external), 4 to 24 MHz (STM32F100xx) or 4 to 16 MHz (STM32F101x/STM32F102x/STM32F103x) or 3 to 25 MHz (STM32F105x/STM32F107x) crystal oscillator used directly or - through the PLL as System clock source. Can be used also as RTC clock source. - - (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source. - - (#) PLL (clocked by HSI or HSE), featuring different output clocks: - (++) The first output is used to generate the high speed system clock (up to 72 MHz for STM32F10xxx or up to 24 MHz for STM32F100xx) - (++) The second output is used to generate the clock for the USB OTG FS (48 MHz) - - (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE() - and if a HSE clock failure occurs(HSE used directly or through PLL as System - clock source), the System clocks automatically switched to HSI and an interrupt - is generated if enabled. The interrupt is linked to the Cortex-M3 NMI - (Non-Maskable Interrupt) exception vector. - - (#) MCO1 (microcontroller clock output), used to output SYSCLK, HSI, - HSE or PLL clock (divided by 2) on PA8 pin + PLL2CLK, PLL3CLK/2, PLL3CLK and XTI for STM32F105x/STM32F107x - - [..] System, AHB and APB buses clocks configuration - (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI, - HSE and PLL. - The AHB clock (HCLK) is derived from System clock through configurable - prescaler and used to clock the CPU, memory and peripherals mapped - on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived - from AHB clock through configurable prescalers and used to clock - the peripherals mapped on these buses. You can use - "@ref HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks. - - -@- All the peripheral clocks are derived from the System clock (SYSCLK) except: - (+@) RTC: RTC clock can be derived either from the LSI, LSE or HSE clock - divided by 128. - (+@) USB OTG FS and RTC: USB OTG FS require a frequency equal to 48 MHz - to work correctly. This clock is derived of the main PLL through PLL Multiplier. - (+@) I2S interface on STM32F105x/STM32F107x can be derived from PLL3CLK - (+@) IWDG clock which is always the LSI clock. - - (#) For STM32F10xxx, the maximum frequency of the SYSCLK and HCLK/PCLK2 is 72 MHz, PCLK1 36 MHz. - For STM32F100xx, the maximum frequency of the SYSCLK and HCLK/PCLK1/PCLK2 is 24 MHz. - Depending on the SYSCLK frequency, the flash latency should be adapted accordingly. - @endverbatim - * @{ - */ - -/* - Additional consideration on the SYSCLK based on Latency settings: - +-----------------------------------------------+ - | Latency | SYSCLK clock frequency (MHz) | - |---------------|-------------------------------| - |0WS(1CPU cycle)| 0 < SYSCLK <= 24 | - |---------------|-------------------------------| - |1WS(2CPU cycle)| 24 < SYSCLK <= 48 | - |---------------|-------------------------------| - |2WS(3CPU cycle)| 48 < SYSCLK <= 72 | - +-----------------------------------------------+ - */ - -/** - * @brief Resets the RCC clock configuration to the default reset state. - * @note The default reset state of the clock configuration is given below: - * - HSI ON and used as system clock source - * - HSE and PLL OFF - * - AHB, APB1 and APB2 prescaler set to 1. - * - CSS and MCO1 OFF - * - All interrupts disabled - * @note This function does not modify the configuration of the - * - Peripheral clocks - * - LSI, LSE and RTC clocks - * @retval None - */ -void HAL_RCC_DeInit(void) -{ - /* Switch SYSCLK to HSI */ - CLEAR_BIT(RCC->CFGR, RCC_CFGR_SW); - - /* Reset HSEON, CSSON, & PLLON bits */ - CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_CSSON | RCC_CR_PLLON); - - /* Reset HSEBYP bit */ - CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP); - - /* Reset CFGR register */ - CLEAR_REG(RCC->CFGR); - - /* Set HSITRIM bits to the reset value */ - MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, ((uint32_t)0x10 << POSITION_VAL(RCC_CR_HSITRIM))); - -#if (defined(STM32F105xC) || defined(STM32F107xC) || defined (STM32F100xB) || defined (STM32F100xE)) - /* Reset CFGR2 register */ - CLEAR_REG(RCC->CFGR2); - -#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */ - /* Disable all interrupts */ - CLEAR_REG(RCC->CIR); - - /* Update the SystemCoreClock global variable */ - SystemCoreClock = HSI_VALUE; -} - -/** - * @brief Initializes the RCC Oscillators according to the specified parameters in the - * RCC_OscInitTypeDef. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that - * contains the configuration information for the RCC Oscillators. - * @note The PLL is not disabled when used as system clock. - * @note The PLL is not disabled when USB OTG FS clock is enabled (specific to devices with USB FS) - * @note Transitions LSE Bypass to LSE On and LSE On to LSE Bypass are not - * supported by this macro. User should request a transition to LSE Off - * first and then LSE On or LSE Bypass. - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not - * supported by this macro. User should request a transition to HSE Off - * first and then HSE On or HSE Bypass. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - uint32_t tickstart = 0; - - /* Check the parameters */ - assert_param(RCC_OscInitStruct != NULL); - assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType)); - - /*------------------------------- HSE Configuration ------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) - { - /* Check the parameters */ - assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState)); - - /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */ - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) - || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE))) - { - if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF)) - { - return HAL_ERROR; - } - } - else - { - /* Set the new HSE configuration ---------------------------------------*/ - __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState); - - - /* Check the HSE State */ - if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF) - { - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till HSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till HSE is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*----------------------------- HSI Configuration --------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) - { - /* Check the parameters */ - assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState)); - assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue)); - - /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ - if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) - || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI_DIV2))) - { - /* When HSI is used as system clock it will not disabled */ - if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON)) - { - return HAL_ERROR; - } - /* Otherwise, just the calibration is allowed */ - else - { - /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - } - else - { - /* Check the HSI State */ - if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF) - { - /* Enable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_ENABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till HSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/ - __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue); - } - else - { - /* Disable the Internal High Speed oscillator (HSI). */ - __HAL_RCC_HSI_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till HSI is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - /*------------------------------ LSI Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) - { - /* Check the parameters */ - assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState)); - - /* Check the LSI State */ - if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF) - { - /* Enable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_ENABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSI is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - /* To have a fully stabilized clock in the specified range, a software delay of 1ms - should be added.*/ - HAL_Delay(1); - } - else - { - /* Disable the Internal Low Speed oscillator (LSI). */ - __HAL_RCC_LSI_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSI is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - /*------------------------------ LSE Configuration -------------------------*/ - if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) - { - /* Check the parameters */ - assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - SET_BIT(PWR->CR, PWR_CR_DBP); - - /* Wait for Backup domain Write protection disable */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Set the new LSE configuration -----------------------------------------*/ - __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState); - /* Check the LSE State */ - if(RCC_OscInitStruct->LSEState != RCC_LSE_OFF) - { - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - -#if defined(RCC_CR_PLL2ON) - /*-------------------------------- PLL2 Configuration -----------------------*/ - /* Check the parameters */ - assert_param(IS_RCC_PLL2(RCC_OscInitStruct->PLL2.PLL2State)); - if ((RCC_OscInitStruct->PLL2.PLL2State) != RCC_PLL2_NONE) - { - /* This bit can not be cleared if the PLL2 clock is used indirectly as system - clock (i.e. it is used as PLL clock entry that is used as system clock). */ - if((__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) && \ - (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && \ - ((READ_BIT(RCC->CFGR2,RCC_CFGR2_PREDIV1SRC)) == RCC_CFGR2_PREDIV1SRC_PLL2)) - { - return HAL_ERROR; - } - else - { - if((RCC_OscInitStruct->PLL2.PLL2State) == RCC_PLL2_ON) - { - /* Check the parameters */ - assert_param(IS_RCC_PLL2_MUL(RCC_OscInitStruct->PLL2.PLL2MUL)); - assert_param(IS_RCC_HSE_PREDIV2(RCC_OscInitStruct->PLL2.HSEPrediv2Value)); - - /* Prediv2 can be written only when the PLLI2S is disabled. */ - /* Return an error only if new value is different from the programmed value */ - if (HAL_IS_BIT_SET(RCC->CR,RCC_CR_PLL3ON) && \ - (__HAL_RCC_HSE_GET_PREDIV2() != RCC_OscInitStruct->PLL2.HSEPrediv2Value)) - { - return HAL_ERROR; - } - - /* Disable the main PLL2. */ - __HAL_RCC_PLL2_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till PLL2 is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL2_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Configure the HSE prediv2 factor --------------------------------*/ - __HAL_RCC_HSE_PREDIV2_CONFIG(RCC_OscInitStruct->PLL2.HSEPrediv2Value); - - /* Configure the main PLL2 multiplication factors. */ - __HAL_RCC_PLL2_CONFIG(RCC_OscInitStruct->PLL2.PLL2MUL); - - /* Enable the main PLL2. */ - __HAL_RCC_PLL2_ENABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till PLL2 is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLL2_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Set PREDIV1 source to HSE */ - CLEAR_BIT(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC); - - /* Disable the main PLL2. */ - __HAL_RCC_PLL2_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till PLL2 is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL2_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - } - -#endif /* RCC_CR_PLL2ON */ - /*-------------------------------- PLL Configuration -----------------------*/ - /* Check the parameters */ - assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState)); - if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE) - { - /* Check if the PLL is used as system clock or not */ - if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK) - { - if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON) - { - /* Check the parameters */ - assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource)); - assert_param(IS_RCC_PLL_MUL(RCC_OscInitStruct->PLL.PLLMUL)); - - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till PLL is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Configure the HSE prediv factor --------------------------------*/ - /* It can be written only when the PLL is disabled. Not used in PLL source is different than HSE */ - if(RCC_OscInitStruct->PLL.PLLSource == RCC_PLLSOURCE_HSE) - { - /* Check the parameter */ - assert_param(IS_RCC_HSE_PREDIV(RCC_OscInitStruct->HSEPredivValue)); -#if defined(RCC_CFGR2_PREDIV1SRC) - assert_param(IS_RCC_PREDIV1_SOURCE(RCC_OscInitStruct->Prediv1Source)); - - /* Set PREDIV1 source */ - SET_BIT(RCC->CFGR2, RCC_OscInitStruct->Prediv1Source); -#endif /* RCC_CFGR2_PREDIV1SRC */ - - /* Set PREDIV1 Value */ - __HAL_RCC_HSE_PREDIV_CONFIG(RCC_OscInitStruct->HSEPredivValue); - } - - /* Configure the main PLL clock source and multiplication factors. */ - __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource, - RCC_OscInitStruct->PLL.PLLMUL); - /* Enable the main PLL. */ - __HAL_RCC_PLL_ENABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till PLL is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Disable the main PLL. */ - __HAL_RCC_PLL_DISABLE(); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - /* Wait till PLL is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - else - { - return HAL_ERROR; - } - } - - return HAL_OK; -} - -/** - * @brief Initializes the CPU, AHB and APB buses clocks according to the specified - * parameters in the RCC_ClkInitStruct. - * @param RCC_ClkInitStruct pointer to an RCC_OscInitTypeDef structure that - * contains the configuration information for the RCC peripheral. - * @param FLatency FLASH Latency - * The value of this parameter depend on device used within the same series - * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency - * and updated by @ref HAL_RCC_GetHCLKFreq() function called within this function - * - * @note The HSI is used (enabled by hardware) as system clock source after - * start-up from Reset, wake-up from STOP and STANDBY mode, or in case - * of failure of the HSE used directly or indirectly as system clock - * (if the Clock Security System CSS is enabled). - * - * @note A switch from one clock source to another occurs only if the target - * clock source is ready (clock stable after start-up delay or PLL locked). - * If a clock source which is not yet ready is selected, the switch will - * occur when the clock source will be ready. - * You can use @ref HAL_RCC_GetClockConfig() function to know which clock is - * currently used as system clock source. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency) -{ - uint32_t tickstart = 0; - - /* Check the parameters */ - assert_param(RCC_ClkInitStruct != NULL); - assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType)); - assert_param(IS_FLASH_LATENCY(FLatency)); - - /* To correctly read data from FLASH memory, the number of wait states (LATENCY) - must be correctly programmed according to the frequency of the CPU clock - (HCLK) of the device. */ - -#if defined(FLASH_ACR_LATENCY) - /* Increasing the number of wait states because of higher CPU frequency */ - if(FLatency > (FLASH->ACR & FLASH_ACR_LATENCY)) - { - /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ - __HAL_FLASH_SET_LATENCY(FLatency); - - /* Check that the new number of wait states is taken into account to access the Flash - memory by reading the FLASH_ACR register */ - if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency) - { - return HAL_ERROR; - } - } - -#endif /* FLASH_ACR_LATENCY */ - /*-------------------------- HCLK Configuration --------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) - { - assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider); - } - - /*------------------------- SYSCLK Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) - { - assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource)); - - /* HSE is selected as System Clock Source */ - if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) - { - /* Check the HSE ready flag */ - if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET) - { - return HAL_ERROR; - } - } - /* PLL is selected as System Clock Source */ - else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) - { - /* Check the PLL ready flag */ - if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET) - { - return HAL_ERROR; - } - } - /* HSI is selected as System Clock Source */ - else - { - /* Check the HSI ready flag */ - if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET) - { - return HAL_ERROR; - } - } - __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource); - - /* Get Start Tick */ - tickstart = HAL_GetTick(); - - if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE) - { - while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE) - { - if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) - { - while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK) - { - if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI) - { - if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } -#if defined(FLASH_ACR_LATENCY) - /* Decreasing the number of wait states because of lower CPU frequency */ - if(FLatency < (FLASH->ACR & FLASH_ACR_LATENCY)) - { - /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */ - __HAL_FLASH_SET_LATENCY(FLatency); - - /* Check that the new number of wait states is taken into account to access the Flash - memory by reading the FLASH_ACR register */ - if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency) - { - return HAL_ERROR; - } - } -#endif /* FLASH_ACR_LATENCY */ - - /*-------------------------- PCLK1 Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) - { - assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider); - } - - /*-------------------------- PCLK2 Configuration ---------------------------*/ - if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2) - { - assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider)); - MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3)); - } - - /* Update the SystemCoreClock global variable */ - SystemCoreClock = HAL_RCC_GetSysClockFreq() >> AHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_BITNUMBER]; - - /* Configure the source of time base considering new system clocks settings*/ - HAL_InitTick (TICK_INT_PRIORITY); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions - * @brief RCC clocks control functions - * - @verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the RCC Clocks - frequencies. - - @endverbatim - * @{ - */ - -/** - * @brief Selects the clock source to output on MCO pin. - * @note MCO pin should be configured in alternate function mode. - * @param RCC_MCOx specifies the output direction for the clock source. - * This parameter can be one of the following values: - * @arg @ref RCC_MCO1 Clock source to output on MCO1 pin(PA8). - * @param RCC_MCOSource specifies the clock source to output. - * This parameter can be one of the following values: - * @arg @ref RCC_MCO1SOURCE_NOCLOCK No clock selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_SYSCLK System clock selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_HSI HSI selected as MCO clock - * @arg @ref RCC_MCO1SOURCE_HSE HSE selected as MCO clock - @if STM32F105xC - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock divided by 2 selected as MCO source - * @arg @ref RCC_MCO1SOURCE_PLL2CLK PLL2 clock selected as MCO source - * @arg @ref RCC_MCO1SOURCE_PLL3CLK_DIV2 PLL3 clock divided by 2 selected as MCO source - * @arg @ref RCC_MCO1SOURCE_EXT_HSE XT1 external 3-25 MHz oscillator clock selected as MCO source - * @arg @ref RCC_MCO1SOURCE_PLL3CLK PLL3 clock selected as MCO source - @endif - @if STM32F107xC - * @arg @ref RCC_MCO1SOURCE_PLLCLK PLL clock divided by 2 selected as MCO source - * @arg @ref RCC_MCO1SOURCE_PLL2CLK PLL2 clock selected as MCO source - * @arg @ref RCC_MCO1SOURCE_PLL3CLK_DIV2 PLL3 clock divided by 2 selected as MCO source - * @arg @ref RCC_MCO1SOURCE_EXT_HSE XT1 external 3-25 MHz oscillator clock selected as MCO source - * @arg @ref RCC_MCO1SOURCE_PLL3CLK PLL3 clock selected as MCO source - @endif - * @param RCC_MCODiv specifies the MCO DIV. - * This parameter can be one of the following values: - * @arg @ref RCC_MCODIV_1 no division applied to MCO clock - * @retval None - */ -void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv) -{ - GPIO_InitTypeDef gpio = {0}; - - /* Check the parameters */ - assert_param(IS_RCC_MCO(RCC_MCOx)); - assert_param(IS_RCC_MCODIV(RCC_MCODiv)); - assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource)); - - /* Configure the MCO1 pin in alternate function mode */ - gpio.Mode = GPIO_MODE_AF_PP; - gpio.Speed = GPIO_SPEED_FREQ_HIGH; - gpio.Pull = GPIO_NOPULL; - gpio.Pin = MCO1_PIN; - - /* MCO1 Clock Enable */ - MCO1_CLK_ENABLE(); - - HAL_GPIO_Init(MCO1_GPIO_PORT, &gpio); - - /* Configure the MCO clock source */ - __HAL_RCC_MCO1_CONFIG(RCC_MCOSource, RCC_MCODiv); -} - -/** - * @brief Enables the Clock Security System. - * @note If a failure is detected on the HSE oscillator clock, this oscillator - * is automatically disabled and an interrupt is generated to inform the - * software about the failure (Clock Security System Interrupt, CSSI), - * allowing the MCU to perform rescue operations. The CSSI is linked to - * the Cortex-M3 NMI (Non-Maskable Interrupt) exception vector. - * @retval None - */ -void HAL_RCC_EnableCSS(void) -{ - *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE; -} - -/** - * @brief Disables the Clock Security System. - * @retval None - */ -void HAL_RCC_DisableCSS(void) -{ - *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE; -} - -/** - * @brief Returns the SYSCLK frequency - * @note The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*) - * @note If SYSCLK source is HSE, function returns a value based on HSE_VALUE - * divided by PREDIV factor(**) - * @note If SYSCLK source is PLL, function returns a value based on HSE_VALUE - * divided by PREDIV factor(**) or HSI_VALUE(*) multiplied by the PLL factor. - * @note (*) HSI_VALUE is a constant defined in stm32f1xx_hal_conf.h file (default value - * 8 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * @note (**) HSE_VALUE is a constant defined in stm32f1xx_hal_conf.h file (default value - * 8 MHz), user has to ensure that HSE_VALUE is same as the real - * frequency of the crystal used. Otherwise, this function may - * have wrong result. - * - * @note The result of this function could be not correct when using fractional - * value for HSE crystal. - * - * @note This function can be used by the user application to compute the - * baud-rate for the communication peripherals or configure other parameters. - * - * @note Each time SYSCLK changes, this function must be called to update the - * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect. - * - * @retval SYSCLK frequency - */ -uint32_t HAL_RCC_GetSysClockFreq(void) -{ -#if defined(RCC_CFGR2_PREDIV1SRC) - const uint8_t aPLLMULFactorTable[12] = {0, 0, 4, 5, 6, 7, 8, 9, 0, 0, 0, 13}; - const uint8_t aPredivFactorTable[16] = { 1, 2, 3, 4, 5, 6, 7, 8, 9,10, 11, 12, 13, 14, 15, 16}; -#else - const uint8_t aPLLMULFactorTable[16] = { 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16}; -#if defined(RCC_CFGR2_PREDIV1) - const uint8_t aPredivFactorTable[16] = { 1, 2, 3, 4, 5, 6, 7, 8, 9,10, 11, 12, 13, 14, 15, 16}; -#else - const uint8_t aPredivFactorTable[2] = { 1, 2}; -#endif /*RCC_CFGR2_PREDIV1*/ - -#endif - uint32_t tmpreg = 0, prediv = 0, pllclk = 0, pllmul = 0; - uint32_t sysclockfreq = 0; -#if defined(RCC_CFGR2_PREDIV1SRC) - uint32_t prediv2 = 0, pll2mul = 0; -#endif /*RCC_CFGR2_PREDIV1SRC*/ - - tmpreg = RCC->CFGR; - - /* Get SYSCLK source -------------------------------------------------------*/ - switch (tmpreg & RCC_CFGR_SWS) - { - case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock */ - { - sysclockfreq = HSE_VALUE; - break; - } - case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock */ - { - pllmul = aPLLMULFactorTable[(uint32_t)(tmpreg & RCC_CFGR_PLLMULL) >> POSITION_VAL(RCC_CFGR_PLLMULL)]; - if ((tmpreg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2) - { -#if defined(RCC_CFGR2_PREDIV1) - prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV1) >> POSITION_VAL(RCC_CFGR2_PREDIV1)]; -#else - prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR & RCC_CFGR_PLLXTPRE) >> POSITION_VAL(RCC_CFGR_PLLXTPRE)]; -#endif /*RCC_CFGR2_PREDIV1*/ -#if defined(RCC_CFGR2_PREDIV1SRC) - - if(HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC)) - { - /* PLL2 selected as Prediv1 source */ - /* PLLCLK = PLL2CLK / PREDIV1 * PLLMUL with PLL2CLK = HSE/PREDIV2 * PLL2MUL */ - prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> POSITION_VAL(RCC_CFGR2_PREDIV2)) + 1; - pll2mul = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> POSITION_VAL(RCC_CFGR2_PLL2MUL)) + 2; - pllclk = (uint32_t)((((HSE_VALUE / prediv2) * pll2mul) / prediv) * pllmul); - } - else - { - /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */ - pllclk = (uint32_t)((HSE_VALUE / prediv) * pllmul); - } - - /* If PLLMUL was set to 13 means that it was to cover the case PLLMUL 6.5 (avoid using float) */ - /* In this case need to divide pllclk by 2 */ - if (pllmul == aPLLMULFactorTable[(uint32_t)(RCC_CFGR_PLLMULL6_5) >> POSITION_VAL(RCC_CFGR_PLLMULL)]) - { - pllclk = pllclk / 2; - } -#else - /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */ - pllclk = (uint32_t)((HSE_VALUE / prediv) * pllmul); -#endif /*RCC_CFGR2_PREDIV1SRC*/ - } - else - { - /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */ - pllclk = (uint32_t)((HSI_VALUE >> 1) * pllmul); - } - sysclockfreq = pllclk; - break; - } - case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */ - default: /* HSI used as system clock */ - { - sysclockfreq = HSI_VALUE; - break; - } - } - return sysclockfreq; -} - -/** - * @brief Returns the HCLK frequency - * @note Each time HCLK changes, this function must be called to update the - * right HCLK value. Otherwise, any configuration based on this function will be incorrect. - * - * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency - * and updated within this function - * @retval HCLK frequency - */ -uint32_t HAL_RCC_GetHCLKFreq(void) -{ - return SystemCoreClock; -} - -/** - * @brief Returns the PCLK1 frequency - * @note Each time PCLK1 changes, this function must be called to update the - * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect. - * @retval PCLK1 frequency - */ -uint32_t HAL_RCC_GetPCLK1Freq(void) -{ - /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/ - return (HAL_RCC_GetHCLKFreq() >> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1) >> RCC_CFGR_PPRE1_BITNUMBER]); -} - -/** - * @brief Returns the PCLK2 frequency - * @note Each time PCLK2 changes, this function must be called to update the - * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect. - * @retval PCLK2 frequency - */ -uint32_t HAL_RCC_GetPCLK2Freq(void) -{ - /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/ - return (HAL_RCC_GetHCLKFreq()>> APBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2) >> RCC_CFGR_PPRE2_BITNUMBER]); -} - -/** - * @brief Configures the RCC_OscInitStruct according to the internal - * RCC configuration registers. - * @param RCC_OscInitStruct pointer to an RCC_OscInitTypeDef structure that - * will be configured. - * @retval None - */ -void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct) -{ - /* Check the parameters */ - assert_param(RCC_OscInitStruct != NULL); - - /* Set all possible values for the Oscillator type parameter ---------------*/ - RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI \ - | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI; - -#if defined(RCC_CFGR2_PREDIV1SRC) - /* Get the Prediv1 source --------------------------------------------------*/ - RCC_OscInitStruct->Prediv1Source = READ_BIT(RCC->CFGR2,RCC_CFGR2_PREDIV1SRC); -#endif /* RCC_CFGR2_PREDIV1SRC */ - - /* Get the HSE configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP) - { - RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS; - } - else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON) - { - RCC_OscInitStruct->HSEState = RCC_HSE_ON; - } - else - { - RCC_OscInitStruct->HSEState = RCC_HSE_OFF; - } - RCC_OscInitStruct->HSEPredivValue = __HAL_RCC_HSE_GET_PREDIV(); - - /* Get the HSI configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION) - { - RCC_OscInitStruct->HSIState = RCC_HSI_ON; - } - else - { - RCC_OscInitStruct->HSIState = RCC_HSI_OFF; - } - - RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR & RCC_CR_HSITRIM) >> POSITION_VAL(RCC_CR_HSITRIM)); - - /* Get the LSE configuration -----------------------------------------------*/ - if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP) - { - RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS; - } - else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON) - { - RCC_OscInitStruct->LSEState = RCC_LSE_ON; - } - else - { - RCC_OscInitStruct->LSEState = RCC_LSE_OFF; - } - - /* Get the LSI configuration -----------------------------------------------*/ - if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION) - { - RCC_OscInitStruct->LSIState = RCC_LSI_ON; - } - else - { - RCC_OscInitStruct->LSIState = RCC_LSI_OFF; - } - - - /* Get the PLL configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON) - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON; - } - else - { - RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF; - } - RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLSRC); - RCC_OscInitStruct->PLL.PLLMUL = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLMULL); -#if defined(RCC_CR_PLL2ON) - /* Get the PLL2 configuration -----------------------------------------------*/ - if((RCC->CR &RCC_CR_PLL2ON) == RCC_CR_PLL2ON) - { - RCC_OscInitStruct->PLL2.PLL2State = RCC_PLL2_ON; - } - else - { - RCC_OscInitStruct->PLL2.PLL2State = RCC_PLL2_OFF; - } - RCC_OscInitStruct->PLL2.HSEPrediv2Value = __HAL_RCC_HSE_GET_PREDIV2(); - RCC_OscInitStruct->PLL2.PLL2MUL = (uint32_t)(RCC->CFGR2 & RCC_CFGR2_PLL2MUL); -#endif /* RCC_CR_PLL2ON */ -} - -/** - * @brief Get the RCC_ClkInitStruct according to the internal - * RCC configuration registers. - * @param RCC_ClkInitStruct pointer to an RCC_ClkInitTypeDef structure that - * contains the current clock configuration. - * @param pFLatency Pointer on the Flash Latency. - * @retval None - */ -void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency) -{ - /* Check the parameters */ - assert_param(RCC_ClkInitStruct != NULL); - assert_param(pFLatency != NULL); - - /* Set all possible values for the Clock type parameter --------------------*/ - RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2; - - /* Get the SYSCLK configuration --------------------------------------------*/ - RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW); - - /* Get the HCLK configuration ----------------------------------------------*/ - RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); - - /* Get the APB1 configuration ----------------------------------------------*/ - RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1); - - /* Get the APB2 configuration ----------------------------------------------*/ - RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3); - -#if defined(FLASH_ACR_LATENCY) - /* Get the Flash Wait State (Latency) configuration ------------------------*/ - *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY); -#else - /* For VALUE lines devices, only LATENCY_0 can be set*/ - *pFLatency = (uint32_t)FLASH_LATENCY_0; -#endif -} - -/** - * @brief This function handles the RCC CSS interrupt request. - * @note This API should be called under the NMI_Handler(). - * @retval None - */ -void HAL_RCC_NMI_IRQHandler(void) -{ - /* Check RCC CSSF flag */ - if(__HAL_RCC_GET_IT(RCC_IT_CSS)) - { - /* RCC Clock Security System interrupt user callback */ - HAL_RCC_CSSCallback(); - - /* Clear RCC CSS pending bit */ - __HAL_RCC_CLEAR_IT(RCC_IT_CSS); - } -} - -/** - * @brief RCC Clock Security System interrupt callback - * @retval none - */ -__weak void HAL_RCC_CSSCallback(void) -{ - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_RCC_CSSCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_RCC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c deleted file mode 100644 index 7f863f5..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c +++ /dev/null @@ -1,870 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_rcc_ex.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Extended RCC HAL module driver. - * This file provides firmware functions to manage the following - * functionalities RCC extension peripheral: - * + Extended Peripheral Control functions - * - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -#ifdef HAL_RCC_MODULE_ENABLED - -/** @defgroup RCCEx RCCEx - * @brief RCC Extension HAL module driver. - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/** @defgroup RCCEx_Private_Constants RCCEx Private Constants - * @{ - */ -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/** @defgroup RCCEx_Private_Macros RCCEx Private Macros - * @{ - */ -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions - * @{ - */ - -/** @defgroup RCCEx_Exported_Functions_Group1 Peripheral Control functions - * @brief Extended Peripheral Control functions - * -@verbatim - =============================================================================== - ##### Extended Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the RCC Clocks - frequencies. - [..] - (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to - select the RTC clock source; in this case the Backup domain will be reset in - order to modify the RTC Clock source, as consequence RTC registers (including - the backup registers) are set to their reset values. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the - * RCC_PeriphCLKInitTypeDef. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * contains the configuration information for the Extended Peripherals clocks(RTC clock). - * - * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select - * the RTC clock source; in this case the Backup domain will be reset in - * order to modify the RTC Clock source, as consequence RTC registers (including - * the backup registers) are set to their reset values. - * - * @note In case of STM32F105xC or STM32F107xC devices, PLLI2S will be enabled if requested on - * one of 2 I2S interfaces. When PLLI2S is enabled, you need to call HAL_RCCEx_DisablePLLI2S to - * manually disable it. - * - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t tickstart = 0, temp_reg = 0; -#if defined(STM32F105xC) || defined(STM32F107xC) - uint32_t pllactive = 0; -#endif /* STM32F105xC || STM32F107xC */ - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); - - /*------------------------------- RTC/LCD Configuration ------------------------*/ - if ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC)) - { - /* check for RTC Parameters used to output RTCCLK */ - assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); - - /* Enable Power Clock*/ - __HAL_RCC_PWR_CLK_ENABLE(); - - /* Enable write access to Backup domain */ - SET_BIT(PWR->CR, PWR_CR_DBP); - - /* Wait for Backup domain Write protection disable */ - tickstart = HAL_GetTick(); - - while((PWR->CR & PWR_CR_DBP) == RESET) - { - if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Reset the Backup domain only if the RTC Clock source selection is modified from reset value */ - temp_reg = (RCC->BDCR & RCC_BDCR_RTCSEL); - if((temp_reg != 0x00000000U) && (temp_reg != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))) - { - /* Store the content of BDCR register before the reset of Backup Domain */ - temp_reg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL)); - /* RTC Clock selection can be changed only if the Backup Domain is reset */ - __HAL_RCC_BACKUPRESET_FORCE(); - __HAL_RCC_BACKUPRESET_RELEASE(); - /* Restore the Content of BDCR register */ - RCC->BDCR = temp_reg; - - /* Wait for LSERDY if LSE was enabled */ - if (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSEON)) - { - /* Get timeout */ - tickstart = HAL_GetTick(); - - /* Wait till LSE is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET) - { - if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - } - __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); - } - - /*------------------------------ ADC clock Configuration ------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) - { - /* Check the parameters */ - assert_param(IS_RCC_ADCPLLCLK_DIV(PeriphClkInit->AdcClockSelection)); - - /* Configure the ADC clock source */ - __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); - } - -#if defined(STM32F105xC) || defined(STM32F107xC) - /*------------------------------ I2S2 Configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S2) == RCC_PERIPHCLK_I2S2) - { - /* Check the parameters */ - assert_param(IS_RCC_I2S2CLKSOURCE(PeriphClkInit->I2s2ClockSelection)); - - /* Configure the I2S2 clock source */ - __HAL_RCC_I2S2_CONFIG(PeriphClkInit->I2s2ClockSelection); - } - - /*------------------------------ I2S3 Configuration ------------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S3) == RCC_PERIPHCLK_I2S3) - { - /* Check the parameters */ - assert_param(IS_RCC_I2S3CLKSOURCE(PeriphClkInit->I2s3ClockSelection)); - - /* Configure the I2S3 clock source */ - __HAL_RCC_I2S3_CONFIG(PeriphClkInit->I2s3ClockSelection); - } - - /*------------------------------ PLL I2S Configuration ----------------------*/ - /* Check that PLLI2S need to be enabled */ - if (HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_I2S2SRC) || HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_I2S3SRC)) - { - /* Update flag to indicate that PLL I2S should be active */ - pllactive = 1; - } - - /* Check if PLL I2S need to be enabled */ - if (pllactive == 1) - { - /* Enable PLL I2S only if not active */ - if (HAL_IS_BIT_CLR(RCC->CR, RCC_CR_PLL3ON)) - { - /* Check the parameters */ - assert_param(IS_RCC_PLLI2S_MUL(PeriphClkInit->PLLI2S.PLLI2SMUL)); - assert_param(IS_RCC_HSE_PREDIV2(PeriphClkInit->PLLI2S.HSEPrediv2Value)); - - /* Prediv2 can be written only when the PLL2 is disabled. */ - /* Return an error only if new value is different from the programmed value */ - if (HAL_IS_BIT_SET(RCC->CR,RCC_CR_PLL2ON) && \ - (__HAL_RCC_HSE_GET_PREDIV2() != PeriphClkInit->PLLI2S.HSEPrediv2Value)) - { - return HAL_ERROR; - } - - /* Configure the HSE prediv2 factor --------------------------------*/ - __HAL_RCC_HSE_PREDIV2_CONFIG(PeriphClkInit->PLLI2S.HSEPrediv2Value); - - /* Configure the main PLLI2S multiplication factors. */ - __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SMUL); - - /* Enable the main PLLI2S. */ - __HAL_RCC_PLLI2S_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* Return an error only if user wants to change the PLLI2SMUL whereas PLLI2S is active */ - if (READ_BIT(RCC->CFGR2, RCC_CFGR2_PLL3MUL) != PeriphClkInit->PLLI2S.PLLI2SMUL) - { - return HAL_ERROR; - } - } - } -#endif /* STM32F105xC || STM32F107xC */ - -#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ - || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ - || defined(STM32F105xC) || defined(STM32F107xC) - /*------------------------------ USB clock Configuration ------------------*/ - if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == RCC_PERIPHCLK_USB) - { - /* Check the parameters */ - assert_param(IS_RCC_USBPLLCLK_DIV(PeriphClkInit->UsbClockSelection)); - - /* Configure the USB clock source */ - __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); - } -#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ - - return HAL_OK; -} - -/** - * @brief Get the PeriphClkInit according to the internal - * RCC configuration registers. - * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that - * returns the configuration information for the Extended Peripherals clocks(RTC, I2S, ADC clocks). - * @retval None - */ -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) -{ - uint32_t srcclk = 0; - - /* Set all possible values for the extended clock type parameter------------*/ - PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_RTC; - - /* Get the RTC configuration -----------------------------------------------*/ - srcclk = __HAL_RCC_GET_RTC_SOURCE(); - /* Source clock is LSE or LSI*/ - PeriphClkInit->RTCClockSelection = srcclk; - - /* Get the ADC clock configuration -----------------------------------------*/ - PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_ADC; - PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE(); - -#if defined(STM32F105xC) || defined(STM32F107xC) - /* Get the I2S2 clock configuration -----------------------------------------*/ - PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S2; - PeriphClkInit->I2s2ClockSelection = __HAL_RCC_GET_I2S2_SOURCE(); - - /* Get the I2S3 clock configuration -----------------------------------------*/ - PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S3; - PeriphClkInit->I2s3ClockSelection = __HAL_RCC_GET_I2S3_SOURCE(); - -#endif /* STM32F105xC || STM32F107xC */ - -#if defined(STM32F103xE) || defined(STM32F103xG) - /* Get the I2S2 clock configuration -----------------------------------------*/ - PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S2; - PeriphClkInit->I2s2ClockSelection = RCC_I2S2CLKSOURCE_SYSCLK; - - /* Get the I2S3 clock configuration -----------------------------------------*/ - PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_I2S3; - PeriphClkInit->I2s3ClockSelection = RCC_I2S3CLKSOURCE_SYSCLK; - -#endif /* STM32F103xE || STM32F103xG */ - -#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ - || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ - || defined(STM32F105xC) || defined(STM32F107xC) - /* Get the USB clock configuration -----------------------------------------*/ - PeriphClkInit->PeriphClockSelection |= RCC_PERIPHCLK_USB; - PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE(); -#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ -} - -/** - * @brief Returns the peripheral clock frequency - * @note Returns 0 if peripheral clock is unknown - * @param PeriphClk Peripheral clock identifier - * This parameter can be one of the following values: - * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock - * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock - @if STM32F103xE - * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock - @endif - @if STM32F103xG - * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock - @endif - @if STM32F105xC - * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock - * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock - @endif - @if STM32F107xC - * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S3 I2S3 peripheral clock - * @arg @ref RCC_PERIPHCLK_I2S2 I2S2 peripheral clock - * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock - @endif - @if STM32F102xx - * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock - @endif - @if STM32F103xx - * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock - @endif - * @retval Frequency in Hz (0: means that no available frequency for the peripheral) - */ -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) -{ -#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ - || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ - || defined(STM32F105xC) || defined(STM32F107xC) -#if defined(STM32F105xC) || defined(STM32F107xC) - const uint8_t aPLLMULFactorTable[12] = {0, 0, 4, 5, 6, 7, 8, 9, 0, 0, 0, 13}; - const uint8_t aPredivFactorTable[16] = { 1, 2, 3, 4, 5, 6, 7, 8, 9,10, 11, 12, 13, 14, 15, 16}; -#else - const uint8_t aPLLMULFactorTable[16] = { 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16}; - const uint8_t aPredivFactorTable[2] = { 1, 2}; -#endif -#endif - uint32_t temp_reg = 0, frequency = 0; -#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ - || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ - || defined(STM32F105xC) || defined(STM32F107xC) - uint32_t prediv1 = 0, pllclk = 0, pllmul = 0; -#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ -#if defined(STM32F105xC) || defined(STM32F107xC) - uint32_t pll2mul = 0, pll3mul = 0, prediv2 = 0; -#endif /* STM32F105xC || STM32F107xC */ - - /* Check the parameters */ - assert_param(IS_RCC_PERIPHCLOCK(PeriphClk)); - - switch (PeriphClk) - { -#if defined(STM32F102x6) || defined(STM32F102xB) || defined(STM32F103x6)\ - || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG)\ - || defined(STM32F105xC) || defined(STM32F107xC) - case RCC_PERIPHCLK_USB: - { - /* Get RCC configuration ------------------------------------------------------*/ - temp_reg = RCC->CFGR; - - /* Check if PLL is enabled */ - if (HAL_IS_BIT_SET(RCC->CR,RCC_CR_PLLON)) - { - pllmul = aPLLMULFactorTable[(uint32_t)(temp_reg & RCC_CFGR_PLLMULL) >> POSITION_VAL(RCC_CFGR_PLLMULL)]; - if ((temp_reg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2) - { -#if defined(STM32F105xC) || defined(STM32F107xC) || defined(STM32F100xB)\ - || defined(STM32F100xE) - prediv1 = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV1) >> POSITION_VAL(RCC_CFGR2_PREDIV1)]; -#else - prediv1 = aPredivFactorTable[(uint32_t)(RCC->CFGR & RCC_CFGR_PLLXTPRE) >> POSITION_VAL(RCC_CFGR_PLLXTPRE)]; -#endif /* STM32F105xC || STM32F107xC || STM32F100xB || STM32F100xE */ - -#if defined(STM32F105xC) || defined(STM32F107xC) - if(HAL_IS_BIT_SET(RCC->CFGR2, RCC_CFGR2_PREDIV1SRC)) - { - /* PLL2 selected as Prediv1 source */ - /* PLLCLK = PLL2CLK / PREDIV1 * PLLMUL with PLL2CLK = HSE/PREDIV2 * PLL2MUL */ - prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> POSITION_VAL(RCC_CFGR2_PREDIV2)) + 1; - pll2mul = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> POSITION_VAL(RCC_CFGR2_PLL2MUL)) + 2; - pllclk = (uint32_t)((((HSE_VALUE / prediv2) * pll2mul) / prediv1) * pllmul); - } - else - { - /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */ - pllclk = (uint32_t)((HSE_VALUE / prediv1) * pllmul); - } - - /* If PLLMUL was set to 13 means that it was to cover the case PLLMUL 6.5 (avoid using float) */ - /* In this case need to divide pllclk by 2 */ - if (pllmul == aPLLMULFactorTable[(uint32_t)(RCC_CFGR_PLLMULL6_5) >> POSITION_VAL(RCC_CFGR_PLLMULL)]) - { - pllclk = pllclk / 2; - } -#else - if ((temp_reg & RCC_CFGR_PLLSRC) != RCC_PLLSOURCE_HSI_DIV2) - { - /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV1 * PLLMUL */ - pllclk = (uint32_t)((HSE_VALUE / prediv1) * pllmul); - } -#endif /* STM32F105xC || STM32F107xC */ - } - else - { - /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */ - pllclk = (uint32_t)((HSI_VALUE >> 1) * pllmul); - } - - /* Calcul of the USB frequency*/ -#if defined(STM32F105xC) || defined(STM32F107xC) - /* USBCLK = PLLVCO = (2 x PLLCLK) / USB prescaler */ - if (__HAL_RCC_GET_USB_SOURCE() == RCC_USBCLKSOURCE_PLL_DIV2) - { - /* Prescaler of 2 selected for USB */ - frequency = pllclk; - } - else - { - /* Prescaler of 3 selected for USB */ - frequency = (2 * pllclk) / 3; - } -#else - /* USBCLK = PLLCLK / USB prescaler */ - if (__HAL_RCC_GET_USB_SOURCE() == RCC_USBCLKSOURCE_PLL) - { - /* No prescaler selected for USB */ - frequency = pllclk; - } - else - { - /* Prescaler of 1.5 selected for USB */ - frequency = (pllclk * 2) / 3; - } -#endif - } - break; - } -#endif /* STM32F102x6 || STM32F102xB || STM32F103x6 || STM32F103xB || STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ -#if defined(STM32F103xE) || defined(STM32F103xG) || defined(STM32F105xC)\ - || defined(STM32F107xC) - case RCC_PERIPHCLK_I2S2: - { -#if defined(STM32F103xE) || defined(STM32F103xG) - /* SYSCLK used as source clock for I2S2 */ - frequency = HAL_RCC_GetSysClockFreq(); -#else - if (__HAL_RCC_GET_I2S2_SOURCE() == RCC_I2S2CLKSOURCE_SYSCLK) - { - /* SYSCLK used as source clock for I2S2 */ - frequency = HAL_RCC_GetSysClockFreq(); - } - else - { - /* Check if PLLI2S is enabled */ - if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON)) - { - /* PLLI2SVCO = 2 * PLLI2SCLK = 2 * (HSE/PREDIV2 * PLL3MUL) */ - prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> POSITION_VAL(RCC_CFGR2_PREDIV2)) + 1; - pll3mul = ((RCC->CFGR2 & RCC_CFGR2_PLL3MUL) >> POSITION_VAL(RCC_CFGR2_PLL3MUL)) + 2; - frequency = (uint32_t)(2 * ((HSE_VALUE / prediv2) * pll3mul)); - } - } -#endif /* STM32F103xE || STM32F103xG */ - break; - } - case RCC_PERIPHCLK_I2S3: - { -#if defined(STM32F103xE) || defined(STM32F103xG) - /* SYSCLK used as source clock for I2S3 */ - frequency = HAL_RCC_GetSysClockFreq(); -#else - if (__HAL_RCC_GET_I2S3_SOURCE() == RCC_I2S3CLKSOURCE_SYSCLK) - { - /* SYSCLK used as source clock for I2S3 */ - frequency = HAL_RCC_GetSysClockFreq(); - } - else - { - /* Check if PLLI2S is enabled */ - if (HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLL3ON)) - { - /* PLLI2SVCO = 2 * PLLI2SCLK = 2 * (HSE/PREDIV2 * PLL3MUL) */ - prediv2 = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> POSITION_VAL(RCC_CFGR2_PREDIV2)) + 1; - pll3mul = ((RCC->CFGR2 & RCC_CFGR2_PLL3MUL) >> POSITION_VAL(RCC_CFGR2_PLL3MUL)) + 2; - frequency = (uint32_t)(2 * ((HSE_VALUE / prediv2) * pll3mul)); - } - } -#endif /* STM32F103xE || STM32F103xG */ - break; - } -#endif /* STM32F103xE || STM32F103xG || STM32F105xC || STM32F107xC */ - case RCC_PERIPHCLK_RTC: - { - /* Get RCC BDCR configuration ------------------------------------------------------*/ - temp_reg = RCC->BDCR; - - /* Check if LSE is ready if RTC clock selection is LSE */ - if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_LSE) && (HAL_IS_BIT_SET(temp_reg, RCC_BDCR_LSERDY))) - { - frequency = LSE_VALUE; - } - /* Check if LSI is ready if RTC clock selection is LSI */ - else if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_LSI) && (HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY))) - { - frequency = LSI_VALUE; - } - else if (((temp_reg & RCC_BDCR_RTCSEL) == RCC_RTCCLKSOURCE_HSE_DIV128) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY))) - { - frequency = HSE_VALUE / 128; - } - /* Clock not enabled for RTC*/ - else - { - frequency = 0; - } - break; - } - case RCC_PERIPHCLK_ADC: - { - frequency = HAL_RCC_GetPCLK2Freq() / (((__HAL_RCC_GET_ADC_SOURCE() >> POSITION_VAL(RCC_CFGR_ADCPRE_DIV4)) + 1) * 2); - break; - } - default: - { - break; - } - } - return(frequency); -} - -/** - * @} - */ - -#if defined(STM32F105xC) || defined(STM32F107xC) -/** @defgroup RCCEx_Exported_Functions_Group2 PLLI2S Management function - * @brief PLLI2S Management functions - * -@verbatim - =============================================================================== - ##### Extended PLLI2S Management functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the PLLI2S - activation or deactivation -@endverbatim - * @{ - */ - -/** - * @brief Enable PLLI2S - * @param PLLI2SInit pointer to an RCC_PLLI2SInitTypeDef structure that - * contains the configuration information for the PLLI2S - * @note The PLLI2S configuration not modified if used by I2S2 or I2S3 Interface. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_EnablePLLI2S(RCC_PLLI2SInitTypeDef *PLLI2SInit) -{ - uint32_t tickstart = 0; - - /* Check that PLL I2S has not been already enabled by I2S2 or I2S3*/ - if (HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S2SRC) && HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S3SRC)) - { - /* Check the parameters */ - assert_param(IS_RCC_PLLI2S_MUL(PLLI2SInit->PLLI2SMUL)); - assert_param(IS_RCC_HSE_PREDIV2(PLLI2SInit->HSEPrediv2Value)); - - /* Prediv2 can be written only when the PLL2 is disabled. */ - /* Return an error only if new value is different from the programmed value */ - if (HAL_IS_BIT_SET(RCC->CR,RCC_CR_PLL2ON) && \ - (__HAL_RCC_HSE_GET_PREDIV2() != PLLI2SInit->HSEPrediv2Value)) - { - return HAL_ERROR; - } - - /* Disable the main PLLI2S. */ - __HAL_RCC_PLLI2S_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Configure the HSE prediv2 factor --------------------------------*/ - __HAL_RCC_HSE_PREDIV2_CONFIG(PLLI2SInit->HSEPrediv2Value); - - - /* Configure the main PLLI2S multiplication factors. */ - __HAL_RCC_PLLI2S_CONFIG(PLLI2SInit->PLLI2SMUL); - - /* Enable the main PLLI2S. */ - __HAL_RCC_PLLI2S_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* PLLI2S cannot be modified as already used by I2S2 or I2S3 */ - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @brief Disable PLLI2S - * @note PLLI2S is not disabled if used by I2S2 or I2S3 Interface. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_DisablePLLI2S(void) -{ - uint32_t tickstart = 0; - - /* Disable PLL I2S as not requested by I2S2 or I2S3*/ - if (HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S2SRC) && HAL_IS_BIT_CLR(RCC->CFGR2, RCC_CFGR2_I2S3SRC)) - { - /* Disable the main PLLI2S. */ - __HAL_RCC_PLLI2S_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLLI2S is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - else - { - /* PLLI2S is currently used by I2S2 or I2S3. Cannot be disabled.*/ - return HAL_ERROR; - } - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup RCCEx_Exported_Functions_Group3 PLL2 Management function - * @brief PLL2 Management functions - * -@verbatim - =============================================================================== - ##### Extended PLL2 Management functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the PLL2 - activation or deactivation -@endverbatim - * @{ - */ - -/** - * @brief Enable PLL2 - * @param PLL2Init pointer to an RCC_PLL2InitTypeDef structure that - * contains the configuration information for the PLL2 - * @note The PLL2 configuration not modified if used indirectly as system clock. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_EnablePLL2(RCC_PLL2InitTypeDef *PLL2Init) -{ - uint32_t tickstart = 0; - - /* This bit can not be cleared if the PLL2 clock is used indirectly as system - clock (i.e. it is used as PLL clock entry that is used as system clock). */ - if((__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) && \ - (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && \ - ((READ_BIT(RCC->CFGR2,RCC_CFGR2_PREDIV1SRC)) == RCC_CFGR2_PREDIV1SRC_PLL2)) - { - return HAL_ERROR; - } - else - { - /* Check the parameters */ - assert_param(IS_RCC_PLL2_MUL(PLL2Init->PLL2MUL)); - assert_param(IS_RCC_HSE_PREDIV2(PLL2Init->HSEPrediv2Value)); - - /* Prediv2 can be written only when the PLLI2S is disabled. */ - /* Return an error only if new value is different from the programmed value */ - if (HAL_IS_BIT_SET(RCC->CR,RCC_CR_PLL3ON) && \ - (__HAL_RCC_HSE_GET_PREDIV2() != PLL2Init->HSEPrediv2Value)) - { - return HAL_ERROR; - } - - /* Disable the main PLL2. */ - __HAL_RCC_PLL2_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL2 is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL2_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - - /* Configure the HSE prediv2 factor --------------------------------*/ - __HAL_RCC_HSE_PREDIV2_CONFIG(PLL2Init->HSEPrediv2Value); - - /* Configure the main PLL2 multiplication factors. */ - __HAL_RCC_PLL2_CONFIG(PLL2Init->PLL2MUL); - - /* Enable the main PLL2. */ - __HAL_RCC_PLL2_ENABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL2 is ready */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) == RESET) - { - if((HAL_GetTick() - tickstart ) > PLL2_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - return HAL_OK; -} - -/** - * @brief Disable PLL2 - * @note PLL2 is not disabled if used indirectly as system clock. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_RCCEx_DisablePLL2(void) -{ - uint32_t tickstart = 0; - - /* This bit can not be cleared if the PLL2 clock is used indirectly as system - clock (i.e. it is used as PLL clock entry that is used as system clock). */ - if((__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) && \ - (__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && \ - ((READ_BIT(RCC->CFGR2,RCC_CFGR2_PREDIV1SRC)) == RCC_CFGR2_PREDIV1SRC_PLL2)) - { - return HAL_ERROR; - } - else - { - /* Disable the main PLL2. */ - __HAL_RCC_PLL2_DISABLE(); - - /* Get Start Tick*/ - tickstart = HAL_GetTick(); - - /* Wait till PLL2 is disabled */ - while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLL2RDY) != RESET) - { - if((HAL_GetTick() - tickstart ) > PLL2_TIMEOUT_VALUE) - { - return HAL_TIMEOUT; - } - } - } - - return HAL_OK; -} - -/** - * @} - */ -#endif /* STM32F105xC || STM32F107xC */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_RCC_MODULE_ENABLED */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c deleted file mode 100644 index f904f82..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c +++ /dev/null @@ -1,5379 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_tim.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief TIM HAL module driver - * This file provides firmware functions to manage the following - * functionalities of the Timer (TIM) peripheral: - * + Time Base Initialization - * + Time Base Start - * + Time Base Start Interruption - * + Time Base Start DMA - * + Time Output Compare/PWM Initialization - * + Time Output Compare/PWM Channel Configuration - * + Time Output Compare/PWM Start - * + Time Output Compare/PWM Start Interruption - * + Time Output Compare/PWM Start DMA - * + Time Input Capture Initialization - * + Time Input Capture Channel Configuration - * + Time Input Capture Start - * + Time Input Capture Start Interruption - * + Time Input Capture Start DMA - * + Time One Pulse Initialization - * + Time One Pulse Channel Configuration - * + Time One Pulse Start - * + Time Encoder Interface Initialization - * + Time Encoder Interface Start - * + Time Encoder Interface Start Interruption - * + Time Encoder Interface Start DMA - * + Commutation Event configuration with Interruption and DMA - * + Time OCRef clear configuration - * + Time External Clock configuration - @verbatim - ============================================================================== - ##### TIMER Generic features ##### - ============================================================================== - [..] The Timer features include: - (#) 16-bit up, down, up/down auto-reload counter. - (#) 16-bit programmable prescaler allowing dividing (also on the fly) the - counter clock frequency either by any factor between 1 and 65536. - (#) Up to 4 independent channels for: - (++) Input Capture - (++) Output Compare - (++) PWM generation (Edge and Center-aligned Mode) - (++) One-pulse mode output - - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Initialize the TIM low level resources by implementing the following functions - depending from feature used : - (++) Time Base : HAL_TIM_Base_MspInit() - (++) Input Capture : HAL_TIM_IC_MspInit() - (++) Output Compare : HAL_TIM_OC_MspInit() - (++) PWM generation : HAL_TIM_PWM_MspInit() - (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit() - (++) Encoder mode output : HAL_TIM_Encoder_MspInit() - - (#) Initialize the TIM low level resources : - (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); - (##) TIM pins configuration - (+++) Enable the clock for the TIM GPIOs using the following function: - __HAL_RCC_GPIOx_CLK_ENABLE(); - (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); - - (#) The external Clock can be configured, if needed (the default clock is the - internal clock from the APBx), using the following function: - HAL_TIM_ConfigClockSource, the clock configuration should be done before - any start function. - - (#) Configure the TIM in the desired functioning mode using one of the - Initialization function of this driver: - (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base - (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an - Output Compare signal. - (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a - PWM signal. - (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an - external signal. - (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer - in One Pulse Mode. - (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface. - - (#) Activate the TIM peripheral using one of the start functions depending from the feature used: - (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT() - (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT() - (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT() - (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT() - (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT() - (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT(). - - (#) The DMA Burst is managed with the two following functions: - HAL_TIM_DMABurst_WriteStart() - HAL_TIM_DMABurst_ReadStart() - - @endverbatim - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup TIM TIM - * @brief TIM HAL module driver - * @{ - */ - -#ifdef HAL_TIM_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @defgroup TIM_Private_Functions TIM Private Functions - * @{ - */ -static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); -static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter); -static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter); -static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter); -static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter); -static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler, - uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); -static void TIM_ITRx_SetConfig(TIM_TypeDef* TIMx, uint16_t InputTriggerSource); -static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma); -static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma); -static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, - TIM_SlaveConfigTypeDef * sSlaveConfig); - -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ - -/** @defgroup TIM_Exported_Functions TIM Exported Functions - * @{ - */ - -/** @defgroup TIM_Exported_Functions_Group1 Time Base functions - * @brief Time Base functions - * -@verbatim - ============================================================================== - ##### Time Base functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM base. - (+) De-initialize the TIM base. - (+) Start the Time Base. - (+) Stop the Time Base. - (+) Start the Time Base and enable interrupt. - (+) Stop the Time Base and disable interrupt. - (+) Start the Time Base and enable DMA transfer. - (+) Stop the Time Base and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Time base Unit according to the specified - * parameters in the TIM_HandleTypeDef and create the associated handle. - * @param htim : TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if(htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - - if(htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - - /* Init the low level hardware : GPIO, CLOCK, NVIC */ - HAL_TIM_Base_MspInit(htim); - } - - /* Set the TIM state */ - htim->State= HAL_TIM_STATE_BUSY; - - /* Set the Time Base configuration */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the TIM state*/ - htim->State= HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM Base peripheral - * @param htim : TIM Base handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIM_Base_MspDeInit(htim); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Base MSP. - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIM_Base_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Base MSP. - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIM_Base_MspDeInit could be implemented in the user file - */ -} - - -/** - * @brief Starts the TIM Base generation. - * @param htim : TIM handle - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Set the TIM state */ - htim->State= HAL_TIM_STATE_BUSY; - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Change the TIM state*/ - htim->State= HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Base generation. - * @param htim : TIM handle - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Set the TIM state */ - htim->State= HAL_TIM_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the TIM state*/ - htim->State= HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Base generation in interrupt mode. - * @param htim : TIM handle - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - /* Enable the TIM Update interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Base generation in interrupt mode. - * @param htim : TIM handle - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - /* Disable the TIM Update interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Base generation in DMA mode. - * @param htim : TIM handle - * @param pData : The source Buffer address. - * @param Length : The length of data to be transferred from memory to peripheral. - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); - - if((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if((htim->State == HAL_TIM_STATE_READY)) - { - if((pData == 0 ) && (Length > 0)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length); - - /* Enable the TIM Update DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Base generation in DMA mode. - * @param htim : TIM handle - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); - - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group2 Time Output Compare functions - * @brief Time Output Compare functions - * -@verbatim - ============================================================================== - ##### Time Output Compare functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM Output Compare. - (+) De-initialize the TIM Output Compare. - (+) Start the Time Output Compare. - (+) Stop the Time Output Compare. - (+) Start the Time Output Compare and enable interrupt. - (+) Stop the Time Output Compare and disable interrupt. - (+) Start the Time Output Compare and enable DMA transfer. - (+) Stop the Time Output Compare and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Output Compare according to the specified - * parameters in the TIM_HandleTypeDef and create the associated handle. - * @param htim : TIM Output Compare handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef* htim) -{ - /* Check the TIM handle allocation */ - if(htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - - if(htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_OC_MspInit(htim); - } - - /* Set the TIM state */ - htim->State= HAL_TIM_STATE_BUSY; - - /* Init the base time for the Output Compare */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the TIM state*/ - htim->State= HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM peripheral - * @param htim : TIM Output Compare handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_OC_MspDeInit(htim); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Output Compare MSP. - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIM_OC_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Output Compare MSP. - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIM_OC_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Output Compare signal generation. - * @param htim : TIM Output Compare handle - * @param Channel : TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation. - * @param htim : TIM handle - * @param Channel : TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Ouput */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Output Compare signal generation in interrupt mode. - * @param htim : TIM OC handle - * @param Channel : TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Enable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - } - break; - - default: - break; - } - - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation in interrupt mode. - * @param htim : TIM Output Compare handle - * @param Channel : TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - } - break; - - default: - break; - } - - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Ouput */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Output Compare signal generation in DMA mode. - * @param htim : TIM Output Compare handle - * @param Channel : TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData : The source Buffer address. - * @param Length : The length of data to be transferred from memory to TIM peripheral - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - if((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if((htim->State == HAL_TIM_STATE_READY)) - { - if(((uint32_t)pData == 0 ) && (Length > 0)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length); - - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length); - - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length); - - /* Enable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length); - - /* Enable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - } - break; - - default: - break; - } - - /* Enable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation in DMA mode. - * @param htim : TIM Output Compare handle - * @param Channel : TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - } - break; - - default: - break; - } - - /* Disable the Output compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Ouput */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group3 Time PWM functions - * @brief Time PWM functions - * -@verbatim - ============================================================================== - ##### Time PWM functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM PWM. - (+) De-initialize the TIM PWM. - (+) Start the Time PWM. - (+) Stop the Time PWM. - (+) Start the Time PWM and enable interrupt. - (+) Stop the Time PWM and disable interrupt. - (+) Start the Time PWM and enable DMA transfer. - (+) Stop the Time PWM and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM PWM Time Base according to the specified - * parameters in the TIM_HandleTypeDef and create the associated handle. - * @param htim : TIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if(htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - - if(htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_PWM_MspInit(htim); - } - - /* Set the TIM state */ - htim->State= HAL_TIM_STATE_BUSY; - - /* Init the base time for the PWM */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the TIM state*/ - htim->State= HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM peripheral - * @param htim : TIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_PWM_MspDeInit(htim); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM PWM MSP. - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIM_PWM_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM PWM MSP. - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIM_PWM_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the PWM signal generation. - * @param htim : TIM handle - * @param Channel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the PWM signal generation. - * @param htim : TIM handle - * @param Channel : TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Ouput */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the PWM signal generation in interrupt mode. - * @param htim : TIM handle - * @param Channel : TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Enable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - } - break; - - default: - break; - } - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the PWM signal generation in interrupt mode. - * @param htim : TIM handle - * @param Channel : TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - } - break; - - default: - break; - } - - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Ouput */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM PWM signal generation in DMA mode. - * @param htim : TIM handle - * @param Channel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData : The source Buffer address. - * @param Length : The length of data to be transferred from memory to TIM peripheral - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - if((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if((htim->State == HAL_TIM_STATE_READY)) - { - if(((uint32_t)pData == 0 ) && (Length > 0)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length); - - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length); - - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length); - - /* Enable the TIM Output Capture/Compare 3 request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length); - - /* Enable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - } - break; - - default: - break; - } - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM PWM signal generation in DMA mode. - * @param htim : TIM handle - * @param Channel : TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - } - break; - - default: - break; - } - - /* Disable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Ouput */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group4 Time Input Capture functions - * @brief Time Input Capture functions - * -@verbatim - ============================================================================== - ##### Time Input Capture functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM Input Capture. - (+) De-initialize the TIM Input Capture. - (+) Start the Time Input Capture. - (+) Stop the Time Input Capture. - (+) Start the Time Input Capture and enable interrupt. - (+) Stop the Time Input Capture and disable interrupt. - (+) Start the Time Input Capture and enable DMA transfer. - (+) Stop the Time Input Capture and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Input Capture Time base according to the specified - * parameters in the TIM_HandleTypeDef and create the associated handle. - * @param htim : TIM Input Capture handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim) -{ - /* Check the TIM handle allocation */ - if(htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - - if(htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_IC_MspInit(htim); - } - - /* Set the TIM state */ - htim->State= HAL_TIM_STATE_BUSY; - - /* Init the base time for the input capture */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Initialize the TIM state*/ - htim->State= HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM peripheral - * @param htim : TIM Input Capture handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_IC_MspDeInit(htim); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Input Capture MSP. - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIM_IC_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Input Capture MSP. - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIM_IC_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Input Capture measurement. - * @param htim : TIM Input Capture handle - * @param Channel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_IC_Start (TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Input Capture measurement. - * @param htim : TIM handle - * @param Channel : TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Input Capture measurement in interrupt mode. - * @param htim : TIM Input Capture handle - * @param Channel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_IC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Enable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - } - break; - - default: - break; - } - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Input Capture measurement in interrupt mode. - * @param htim : TIM handle - * @param Channel : TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - } - break; - - default: - break; - } - - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Input Capture measurement in DMA mode. - * @param htim : TIM Input Capture handle - * @param Channel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData : The destination Buffer address. - * @param Length : The length of data to be transferred from TIM peripheral to memory. - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); - - if((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if((htim->State == HAL_TIM_STATE_READY)) - { - if((pData == 0 ) && (Length > 0)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length); - - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length); - - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length); - - /* Enable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length); - - /* Enable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - } - break; - - default: - break; - } - - /* Enable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Input Capture measurement in DMA mode. - * @param htim : TIM Input Capture handle - * @param Channel : TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel)); - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - } - break; - - default: - break; - } - - /* Disable the Input Capture channel */ - TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group5 Time One Pulse functions - * @brief Time One Pulse functions - * -@verbatim - ============================================================================== - ##### Time One Pulse functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM One Pulse. - (+) De-initialize the TIM One Pulse. - (+) Start the Time One Pulse. - (+) Stop the Time One Pulse. - (+) Start the Time One Pulse and enable interrupt. - (+) Stop the Time One Pulse and disable interrupt. - (+) Start the Time One Pulse and enable DMA transfer. - (+) Stop the Time One Pulse and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM One Pulse Time Base according to the specified - * parameters in the TIM_HandleTypeDef and create the associated handle. - * @param htim : TIM OnePulse handle - * @param OnePulseMode : Select the One pulse mode. - * This parameter can be one of the following values: - * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated. - * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses wil be generated. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode) -{ - /* Check the TIM handle allocation */ - if(htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_OPM_MODE(OnePulseMode)); - - if(htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_OnePulse_MspInit(htim); - } - - /* Set the TIM state */ - htim->State= HAL_TIM_STATE_BUSY; - - /* Configure the Time base in the One Pulse Mode */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Reset the OPM Bit */ - htim->Instance->CR1 &= ~TIM_CR1_OPM; - - /* Configure the OPM Mode */ - htim->Instance->CR1 |= OnePulseMode; - - /* Initialize the TIM state*/ - htim->State= HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM One Pulse - * @param htim : TIM One Pulse handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIM_OnePulse_MspDeInit(htim); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM One Pulse MSP. - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIM_OnePulse_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM One Pulse MSP. - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM One Pulse signal generation. - * @param htim : TIM One Pulse handle - * @param OutputChannel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Enable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together - - No need to enable the counter, it's enabled automatically by hardware - (the counter starts in response to a stimulus and generate a pulse */ - - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation. - * @param htim : TIM One Pulse handle - * @param OutputChannel : TIM Channels to be disable - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Disable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ - - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Ouput */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM One Pulse signal generation in interrupt mode. - * @param htim : TIM One Pulse handle - * @param OutputChannel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Enable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together - - No need to enable the counter, it's enabled automatically by hardware - (the counter starts in response to a stimulus and generate a pulse */ - - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Enable the main output */ - __HAL_TIM_MOE_ENABLE(htim); - } - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation in interrupt mode. - * @param htim : TIM One Pulse handle - * @param OutputChannel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - - /* Disable the Capture compare and the Input Capture channels - (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) - if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and - if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output - in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - if(IS_TIM_BREAK_INSTANCE(htim->Instance) != RESET) - { - /* Disable the Main Ouput */ - __HAL_TIM_MOE_DISABLE(htim); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group6 Time Encoder functions - * @brief Time Encoder functions - * -@verbatim - ============================================================================== - ##### Time Encoder functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure the TIM Encoder. - (+) De-initialize the TIM Encoder. - (+) Start the Time Encoder. - (+) Stop the Time Encoder. - (+) Start the Time Encoder and enable interrupt. - (+) Stop the Time Encoder and disable interrupt. - (+) Start the Time Encoder and enable DMA transfer. - (+) Stop the Time Encoder and disable DMA transfer. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Encoder Interface and create the associated handle. - * @param htim : TIM Encoder Interface handle - * @param sConfig : TIM Encoder Interface configuration structure - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig) -{ - uint32_t tmpsmcr = 0; - uint32_t tmpccmr1 = 0; - uint32_t tmpccer = 0; - - /* Check the TIM handle allocation */ - if(htim == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode)); - assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection)); - assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection)); - assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); - assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler)); - assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); - assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter)); - - if(htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIM_Encoder_MspInit(htim); - } - - /* Set the TIM state */ - htim->State= HAL_TIM_STATE_BUSY; - - /* Reset the SMS bits */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - - /* Configure the Time base in the Encoder Mode */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Get the TIMx SMCR register value */ - tmpsmcr = htim->Instance->SMCR; - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = htim->Instance->CCMR1; - - /* Get the TIMx CCER register value */ - tmpccer = htim->Instance->CCER; - - /* Set the encoder Mode */ - tmpsmcr |= sConfig->EncoderMode; - - /* Select the Capture Compare 1 and the Capture Compare 2 as input */ - tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S); - tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8)); - - /* Set the the Capture Compare 1 and the Capture Compare 2 prescalers and filters */ - tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC); - tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F); - tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8); - tmpccmr1 |= (sConfig->IC1Filter << 4) | (sConfig->IC2Filter << 12); - - /* Set the TI1 and the TI2 Polarities */ - tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P); - tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP); - tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4); - - /* Write to TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - - /* Write to TIMx CCMR1 */ - htim->Instance->CCMR1 = tmpccmr1; - - /* Write to TIMx CCER */ - htim->Instance->CCER = tmpccer; - - /* Initialize the TIM state*/ - htim->State= HAL_TIM_STATE_READY; - - return HAL_OK; -} - - -/** - * @brief DeInitializes the TIM Encoder interface - * @param htim : TIM Encoder handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIM_Encoder_MspDeInit(htim); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Encoder Interface MSP. - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIM_Encoder_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Encoder Interface MSP. - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIM_Encoder_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Encoder Interface. - * @param htim : TIM Encoder Interface handle - * @param Channel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Enable the encoder interface channels */ - switch (Channel) - { - case TIM_CHANNEL_1: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - break; - } - case TIM_CHANNEL_2: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - break; - } - default : - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - break; - } - } - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Encoder Interface. - * @param htim : TIM Encoder Interface handle - * @param Channel : TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1 and 2 - (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ - switch (Channel) - { - case TIM_CHANNEL_1: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - break; - } - case TIM_CHANNEL_2: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - break; - } - default : - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - break; - } - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Encoder Interface in interrupt mode. - * @param htim : TIM Encoder Interface handle - * @param Channel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Enable the encoder interface channels */ - /* Enable the capture compare Interrupts 1 and/or 2 */ - switch (Channel) - { - case TIM_CHANNEL_1: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - break; - } - case TIM_CHANNEL_2: - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - default : - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - break; - } - } - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Encoder Interface in interrupt mode. - * @param htim : TIM Encoder Interface handle - * @param Channel : TIM Channels to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1 and 2 - (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ - if(Channel == TIM_CHANNEL_1) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts 1 */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - } - else if(Channel == TIM_CHANNEL_2) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts 2 */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - } - else - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts 1 and 2 */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Encoder Interface in DMA mode. - * @param htim : TIM Encoder Interface handle - * @param Channel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @param pData1 : The destination Buffer address for IC1. - * @param pData2 : The destination Buffer address for IC2. - * @param Length : The length of data to be transferred from TIM peripheral to memory. - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); - - if((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if((htim->State == HAL_TIM_STATE_READY)) - { - if((((pData1 == 0) || (pData2 == 0) )) && (Length > 0)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t )pData1, Length); - - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - } - break; - - case TIM_CHANNEL_2: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError; - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length); - - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - } - break; - - case TIM_CHANNEL_ALL: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length); - - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Enable the Capture compare channel */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); - - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - /* Enable the TIM Input Capture DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - } - break; - - default: - break; - } - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Encoder Interface in DMA mode. - * @param htim : TIM Encoder Interface handle - * @param Channel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected - * @retval HAL status -*/ -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channels 1 and 2 - (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ - if(Channel == TIM_CHANNEL_1) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the capture compare DMA Request 1 */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - } - else if(Channel == TIM_CHANNEL_2) - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare DMA Request 2 */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - } - else - { - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); - - /* Disable the capture compare DMA Request 1 and 2 */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - } - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ -/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management - * @brief IRQ handler management - * -@verbatim - ============================================================================== - ##### IRQ handler management ##### - ============================================================================== - [..] - This section provides Timer IRQ handler function. - -@endverbatim - * @{ - */ -/** - * @brief This function handles TIM interrupts requests. - * @param htim : TIM handle - * @retval None - */ -void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim) -{ - /* Capture compare 1 event */ - if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET) - { - if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) !=RESET) - { - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - - /* Input capture event */ - if((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00) - { - HAL_TIM_IC_CaptureCallback(htim); - } - /* Output compare event */ - else - { - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - } - /* Capture compare 2 event */ - if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET) - { - if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) !=RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - /* Input capture event */ - if((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00) - { - HAL_TIM_IC_CaptureCallback(htim); - } - /* Output compare event */ - else - { - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - /* Capture compare 3 event */ - if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET) - { - if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) !=RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - /* Input capture event */ - if((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00) - { - HAL_TIM_IC_CaptureCallback(htim); - } - /* Output compare event */ - else - { - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - /* Capture compare 4 event */ - if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET) - { - if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) !=RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4); - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - /* Input capture event */ - if((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00) - { - HAL_TIM_IC_CaptureCallback(htim); - } - /* Output compare event */ - else - { - HAL_TIM_OC_DelayElapsedCallback(htim); - HAL_TIM_PWM_PulseFinishedCallback(htim); - } - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; - } - } - /* TIM Update event */ - if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET) - { - if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) !=RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE); - HAL_TIM_PeriodElapsedCallback(htim); - } - } - /* TIM Break input event */ - if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET) - { - if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK); - HAL_TIMEx_BreakCallback(htim); - } - } - /* TIM Trigger detection event */ - if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET) - { - if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) !=RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER); - HAL_TIM_TriggerCallback(htim); - } - } - /* TIM commutation event */ - if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET) - { - if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) !=RESET) - { - __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM); - HAL_TIMEx_CommutationCallback(htim); - } - } -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group8 Peripheral Control functions - * @brief Peripheral Control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. - (+) Configure External Clock source. - (+) Configure Complementary channels, break features and dead time. - (+) Configure Master and the Slave synchronization. - (+) Configure the DMA Burst Mode. - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the TIM Output Compare Channels according to the specified - * parameters in the TIM_OC_InitTypeDef. - * @param htim : TIM Output Compare handle - * @param sConfig : TIM Output Compare configuration structure - * @param Channel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CHANNELS(Channel)); - assert_param(IS_TIM_OC_MODE(sConfig->OCMode)); - assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); - - /* Check input state */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - switch (Channel) - { - case TIM_CHANNEL_1: - { - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - /* Configure the TIM Channel 1 in Output Compare */ - TIM_OC1_SetConfig(htim->Instance, sConfig); - } - break; - - case TIM_CHANNEL_2: - { - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - /* Configure the TIM Channel 2 in Output Compare */ - TIM_OC2_SetConfig(htim->Instance, sConfig); - } - break; - - case TIM_CHANNEL_3: - { - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - /* Configure the TIM Channel 3 in Output Compare */ - TIM_OC3_SetConfig(htim->Instance, sConfig); - } - break; - - case TIM_CHANNEL_4: - { - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - /* Configure the TIM Channel 4 in Output Compare */ - TIM_OC4_SetConfig(htim->Instance, sConfig); - } - break; - - default: - break; - } - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Input Capture Channels according to the specified - * parameters in the TIM_IC_InitTypeDef. - * @param htim : TIM IC handle - * @param sConfig : TIM Input Capture configuration structure - * @param Channel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity)); - assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler)); - assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter)); - - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - if (Channel == TIM_CHANNEL_1) - { - /* TI1 Configuration */ - TIM_TI1_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - - /* Set the IC1PSC value */ - htim->Instance->CCMR1 |= sConfig->ICPrescaler; - } - else if (Channel == TIM_CHANNEL_2) - { - /* TI2 Configuration */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_TI2_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC2PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; - - /* Set the IC2PSC value */ - htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8); - } - else if (Channel == TIM_CHANNEL_3) - { - /* TI3 Configuration */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - TIM_TI3_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC3PSC Bits */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC; - - /* Set the IC3PSC value */ - htim->Instance->CCMR2 |= sConfig->ICPrescaler; - } - else - { - /* TI4 Configuration */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - TIM_TI4_SetConfig(htim->Instance, - sConfig->ICPolarity, - sConfig->ICSelection, - sConfig->ICFilter); - - /* Reset the IC4PSC Bits */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC; - - /* Set the IC4PSC value */ - htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8); - } - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM PWM channels according to the specified - * parameters in the TIM_OC_InitTypeDef. - * @param htim : TIM handle - * @param sConfig : TIM PWM configuration structure - * @param Channel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel) -{ - __HAL_LOCK(htim); - - /* Check the parameters */ - assert_param(IS_TIM_CHANNELS(Channel)); - assert_param(IS_TIM_PWM_MODE(sConfig->OCMode)); - assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity)); - assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); - - htim->State = HAL_TIM_STATE_BUSY; - - switch (Channel) - { - case TIM_CHANNEL_1: - { - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - /* Configure the Channel 1 in PWM mode */ - TIM_OC1_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel1 */ - htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE; - htim->Instance->CCMR1 |= sConfig->OCFastMode; - } - break; - - case TIM_CHANNEL_2: - { - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - /* Configure the Channel 2 in PWM mode */ - TIM_OC2_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel2 */ - htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE; - htim->Instance->CCMR1 |= sConfig->OCFastMode << 8; - } - break; - - case TIM_CHANNEL_3: - { - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - /* Configure the Channel 3 in PWM mode */ - TIM_OC3_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel3 */ - htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE; - htim->Instance->CCMR2 |= sConfig->OCFastMode; - } - break; - - case TIM_CHANNEL_4: - { - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - /* Configure the Channel 4 in PWM mode */ - TIM_OC4_SetConfig(htim->Instance, sConfig); - - /* Set the Preload enable bit for channel4 */ - htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE; - - /* Configure the Output Fast mode */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE; - htim->Instance->CCMR2 |= sConfig->OCFastMode << 8; - } - break; - - default: - break; - } - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM One Pulse Channels according to the specified - * parameters in the TIM_OnePulse_InitTypeDef. - * @param htim : TIM One Pulse handle - * @param sConfig : TIM One Pulse configuration structure - * @param OutputChannel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @param InputChannel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel) -{ - TIM_OC_InitTypeDef temp1; - - /* Check the parameters */ - assert_param(IS_TIM_OPM_CHANNELS(OutputChannel)); - assert_param(IS_TIM_OPM_CHANNELS(InputChannel)); - - if(OutputChannel != InputChannel) - { - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Extract the Ouput compare configuration from sConfig structure */ - temp1.OCMode = sConfig->OCMode; - temp1.Pulse = sConfig->Pulse; - temp1.OCPolarity = sConfig->OCPolarity; - temp1.OCNPolarity = sConfig->OCNPolarity; - temp1.OCIdleState = sConfig->OCIdleState; - temp1.OCNIdleState = sConfig->OCNIdleState; - - switch (OutputChannel) - { - case TIM_CHANNEL_1: - { - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - TIM_OC1_SetConfig(htim->Instance, &temp1); - } - break; - case TIM_CHANNEL_2: - { - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_OC2_SetConfig(htim->Instance, &temp1); - } - break; - default: - break; - } - switch (InputChannel) - { - case TIM_CHANNEL_1: - { - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity, - sConfig->ICSelection, sConfig->ICFilter); - - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - - /* Select the Trigger source */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI1FP1; - - /* Select the Slave Mode */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; - } - break; - case TIM_CHANNEL_2: - { - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity, - sConfig->ICSelection, sConfig->ICFilter); - - /* Reset the IC2PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC; - - /* Select the Trigger source */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI2FP2; - - /* Select the Slave Mode */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER; - } - break; - - default: - break; - } - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - else - { - return HAL_ERROR; - } -} - -/** - * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral - * @param htim : TIM handle - * @param BurstBaseAddress : TIM Base address from where the DMA will start the Data write - * This parameter can be one of the following values: - * @arg TIM_DMABASE_CR1 - * @arg TIM_DMABASE_CR2 - * @arg TIM_DMABASE_SMCR - * @arg TIM_DMABASE_DIER - * @arg TIM_DMABASE_SR - * @arg TIM_DMABASE_EGR - * @arg TIM_DMABASE_CCMR1 - * @arg TIM_DMABASE_CCMR2 - * @arg TIM_DMABASE_CCER - * @arg TIM_DMABASE_CNT - * @arg TIM_DMABASE_PSC - * @arg TIM_DMABASE_ARR - * @arg TIM_DMABASE_RCR - * @arg TIM_DMABASE_CCR1 - * @arg TIM_DMABASE_CCR2 - * @arg TIM_DMABASE_CCR3 - * @arg TIM_DMABASE_CCR4 - * @arg TIM_DMABASE_BDTR - * @arg TIM_DMABASE_DCR - * @param BurstRequestSrc : TIM DMA Request sources - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source - * @param BurstBuffer : The Buffer address. - * @param BurstLength : DMA Burst length. This parameter can be one value - * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, - uint32_t* BurstBuffer, uint32_t BurstLength) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); - assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - assert_param(IS_TIM_DMA_LENGTH(BurstLength)); - - if((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if((htim->State == HAL_TIM_STATE_READY)) - { - if((BurstBuffer == 0 ) && (BurstLength > 0)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - switch(BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1); - } - break; - case TIM_DMA_CC1: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1); - } - break; - case TIM_DMA_CC2: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1); - } - break; - case TIM_DMA_CC3: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1); - } - break; - case TIM_DMA_CC4: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1); - } - break; - case TIM_DMA_COM: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1); - } - break; - case TIM_DMA_TRIGGER: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1); - } - break; - default: - break; - } - /* configure the DMA Burst Mode */ - htim->Instance->DCR = BurstBaseAddress | BurstLength; - - /* Enable the TIM DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); - - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM DMA Burst mode - * @param htim : TIM handle - * @param BurstRequestSrc : TIM DMA Request sources to disable - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - - /* Abort the DMA transfer (at least disable the DMA channel) */ - switch(BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]); - } - break; - case TIM_DMA_CC1: - { - HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]); - } - break; - case TIM_DMA_CC2: - { - HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]); - } - break; - case TIM_DMA_CC3: - { - HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]); - } - break; - case TIM_DMA_CC4: - { - HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]); - } - break; - case TIM_DMA_COM: - { - HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]); - } - break; - case TIM_DMA_TRIGGER: - { - HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]); - } - break; - default: - break; - } - - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory - * @param htim : TIM handle - * @param BurstBaseAddress : TIM Base address from where the DMA will starts the Data read - * This parameter can be one of the following values: - * @arg TIM_DMABASE_CR1 - * @arg TIM_DMABASE_CR2 - * @arg TIM_DMABASE_SMCR - * @arg TIM_DMABASE_DIER - * @arg TIM_DMABASE_SR - * @arg TIM_DMABASE_EGR - * @arg TIM_DMABASE_CCMR1 - * @arg TIM_DMABASE_CCMR2 - * @arg TIM_DMABASE_CCER - * @arg TIM_DMABASE_CNT - * @arg TIM_DMABASE_PSC - * @arg TIM_DMABASE_ARR - * @arg TIM_DMABASE_RCR - * @arg TIM_DMABASE_CCR1 - * @arg TIM_DMABASE_CCR2 - * @arg TIM_DMABASE_CCR3 - * @arg TIM_DMABASE_CCR4 - * @arg TIM_DMABASE_BDTR - * @arg TIM_DMABASE_DCR - * @param BurstRequestSrc : TIM DMA Request sources - * This parameter can be one of the following values: - * @arg TIM_DMA_UPDATE: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source - * @param BurstBuffer : The Buffer address. - * @param BurstLength : DMA Burst length. This parameter can be one value - * between: TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, - uint32_t *BurstBuffer, uint32_t BurstLength) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance)); - assert_param(IS_TIM_DMA_BASE(BurstBaseAddress)); - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - assert_param(IS_TIM_DMA_LENGTH(BurstLength)); - - if((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if((htim->State == HAL_TIM_STATE_READY)) - { - if((BurstBuffer == 0 ) && (BurstLength > 0)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - switch(BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1); - } - break; - case TIM_DMA_CC1: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1); - } - break; - case TIM_DMA_CC2: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1); - } - break; - case TIM_DMA_CC3: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1); - } - break; - case TIM_DMA_CC4: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1); - } - break; - case TIM_DMA_COM: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1); - } - break; - case TIM_DMA_TRIGGER: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1); - } - break; - default: - break; - } - - /* configure the DMA Burst Mode */ - htim->Instance->DCR = BurstBaseAddress | BurstLength; - - /* Enable the TIM DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc); - - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stop the DMA burst reading - * @param htim : TIM handle - * @param BurstRequestSrc : TIM DMA Request sources to disable. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc) -{ - /* Check the parameters */ - assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc)); - - /* Abort the DMA transfer (at least disable the DMA channel) */ - switch(BurstRequestSrc) - { - case TIM_DMA_UPDATE: - { - HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]); - } - break; - case TIM_DMA_CC1: - { - HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]); - } - break; - case TIM_DMA_CC2: - { - HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]); - } - break; - case TIM_DMA_CC3: - { - HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]); - } - break; - case TIM_DMA_CC4: - { - HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]); - } - break; - case TIM_DMA_COM: - { - HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]); - } - break; - case TIM_DMA_TRIGGER: - { - HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]); - } - break; - default: - break; - } - - /* Disable the TIM Update DMA request */ - __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Generate a software event - * @param htim : TIM handle - * @param EventSource : specifies the event source. - * This parameter can be one of the following values: - * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source - * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source - * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source - * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source - * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source - * @arg TIM_EVENTSOURCE_COM: Timer COM event source - * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source - * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source - * @note TIM6 and TIM7 can only generate an update event. - * @note TIM_EVENTSOURCE_COM and TIM_EVENTSOURCE_BREAK are used only with TIM1, TIM15, TIM16 and TIM17. - * @retval HAL status - */ - -HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - assert_param(IS_TIM_EVENT_SOURCE(EventSource)); - - /* Process Locked */ - __HAL_LOCK(htim); - - /* Change the TIM state */ - htim->State = HAL_TIM_STATE_BUSY; - - /* Set the event sources */ - htim->Instance->EGR = EventSource; - - /* Change the TIM state */ - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Configures the OCRef clear feature - * @param htim : TIM handle - * @param sClearInputConfig : pointer to a TIM_ClearInputConfigTypeDef structure that - * contains the OCREF clear feature and parameters for the TIM peripheral. - * @param Channel : specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @arg TIM_CHANNEL_4: TIM Channel 4 - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel) -{ - uint32_t tmpsmcr = 0; - - /* Check the parameters */ - assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance)); - assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource)); - assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity)); - assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler)); - assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter)); - - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - switch (sClearInputConfig->ClearInputSource) - { - case TIM_CLEARINPUTSOURCE_NONE: - { - /* Clear the OCREF clear selection bit */ - tmpsmcr &= ~TIM_SMCR_OCCS; - - /* Clear the ETR Bits */ - tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); - - /* Set TIMx_SMCR */ - htim->Instance->SMCR = tmpsmcr; - } - break; - - case TIM_CLEARINPUTSOURCE_ETR: - { - TIM_ETR_SetConfig(htim->Instance, - sClearInputConfig->ClearInputPrescaler, - sClearInputConfig->ClearInputPolarity, - sClearInputConfig->ClearInputFilter); - - /* Set the OCREF clear selection bit */ - htim->Instance->SMCR |= TIM_SMCR_OCCS; - } - break; - default: - break; - } - - switch (Channel) - { - case TIM_CHANNEL_1: - { - if(sClearInputConfig->ClearInputState != RESET) - { - /* Enable the Ocref clear feature for Channel 1 */ - htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE; - } - else - { - /* Disable the Ocref clear feature for Channel 1 */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE; - } - } - break; - case TIM_CHANNEL_2: - { - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - if(sClearInputConfig->ClearInputState != RESET) - { - /* Enable the Ocref clear feature for Channel 2 */ - htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE; - } - else - { - /* Disable the Ocref clear feature for Channel 2 */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE; - } - } - break; - case TIM_CHANNEL_3: - { - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - if(sClearInputConfig->ClearInputState != RESET) - { - /* Enable the Ocref clear feature for Channel 3 */ - htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE; - } - else - { - /* Disable the Ocref clear feature for Channel 3 */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE; - } - } - break; - case TIM_CHANNEL_4: - { - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - if(sClearInputConfig->ClearInputState != RESET) - { - /* Enable the Ocref clear feature for Channel 4 */ - htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE; - } - else - { - /* Disable the Ocref clear feature for Channel 4 */ - htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE; - } - } - break; - default: - break; - } - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the clock source to be used - * @param htim : TIM handle - * @param sClockSourceConfig : pointer to a TIM_ClockConfigTypeDef structure that - * contains the clock source information for the TIM peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig) -{ - uint32_t tmpsmcr = 0; - - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Check the parameters */ - assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource)); - - /* Reset the SMS, TS, ECE, ETPS and ETRF bits */ - tmpsmcr = htim->Instance->SMCR; - tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); - tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); - htim->Instance->SMCR = tmpsmcr; - - switch (sClockSourceConfig->ClockSource) - { - case TIM_CLOCKSOURCE_INTERNAL: - { - assert_param(IS_TIM_INSTANCE(htim->Instance)); - /* Disable slave mode to clock the prescaler directly with the internal clock */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - } - break; - - case TIM_CLOCKSOURCE_ETRMODE1: - { - /* Check whether or not the timer instance supports external trigger input mode 1 (ETRF)*/ - assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); - - /* Check ETR input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - /* Configure the ETR Clock source */ - TIM_ETR_SetConfig(htim->Instance, - sClockSourceConfig->ClockPrescaler, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - /* Get the TIMx SMCR register value */ - tmpsmcr = htim->Instance->SMCR; - /* Reset the SMS and TS Bits */ - tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS); - /* Select the External clock mode1 and the ETRF trigger */ - tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1); - /* Write to TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - } - break; - - case TIM_CLOCKSOURCE_ETRMODE2: - { - /* Check whether or not the timer instance supports external trigger input mode 2 (ETRF)*/ - assert_param(IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(htim->Instance)); - - /* Check ETR input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler)); - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - /* Configure the ETR Clock source */ - TIM_ETR_SetConfig(htim->Instance, - sClockSourceConfig->ClockPrescaler, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - /* Enable the External clock mode2 */ - htim->Instance->SMCR |= TIM_SMCR_ECE; - } - break; - - case TIM_CLOCKSOURCE_TI1: - { - /* Check whether or not the timer instance supports external clock mode 1 */ - assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); - - /* Check TI1 input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - TIM_TI1_ConfigInputStage(htim->Instance, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1); - } - break; - case TIM_CLOCKSOURCE_TI2: - { - /* Check whether or not the timer instance supports external clock mode 1 (ETRF)*/ - assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); - - /* Check TI2 input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - TIM_TI2_ConfigInputStage(htim->Instance, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2); - } - break; - case TIM_CLOCKSOURCE_TI1ED: - { - /* Check whether or not the timer instance supports external clock mode 1 */ - assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance)); - - /* Check TI1 input conditioning related parameters */ - assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity)); - assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter)); - - TIM_TI1_ConfigInputStage(htim->Instance, - sClockSourceConfig->ClockPolarity, - sClockSourceConfig->ClockFilter); - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED); - } - break; - case TIM_CLOCKSOURCE_ITR0: - { - /* Check whether or not the timer instance supports external clock mode 1 */ - assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); - - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR0); - } - break; - case TIM_CLOCKSOURCE_ITR1: - { - /* Check whether or not the timer instance supports external clock mode 1 */ - assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); - - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR1); - } - break; - case TIM_CLOCKSOURCE_ITR2: - { - /* Check whether or not the timer instance supports external clock mode 1 */ - assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); - - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR2); - } - break; - case TIM_CLOCKSOURCE_ITR3: - { - /* Check whether or not the timer instance supports external clock mode 1 */ - assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance)); - - TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR3); - } - break; - - default: - break; - } - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Selects the signal connected to the TI1 input: direct from CH1_input - * or a XOR combination between CH1_input, CH2_input & CH3_input - * @param htim : TIM handle. - * @param TI1_Selection : Indicate whether or not channel 1 is connected to the - * output of a XOR gate. - * This parameter can be one of the following values: - * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input - * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3 - * pins are connected to the TI1 input (XOR combination) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection) -{ - uint32_t tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TI1SELECTION(TI1_Selection)); - - /* Get the TIMx CR2 register value */ - tmpcr2 = htim->Instance->CR2; - - /* Reset the TI1 selection */ - tmpcr2 &= ~TIM_CR2_TI1S; - - /* Set the the TI1 selection */ - tmpcr2 |= TI1_Selection; - - /* Write to TIMxCR2 */ - htim->Instance->CR2 = tmpcr2; - - return HAL_OK; -} - -/** - * @brief Configures the TIM in Slave mode - * @param htim : TIM handle. - * @param sSlaveConfig : pointer to a TIM_SlaveConfigTypeDef structure that - * contains the selected trigger (internal trigger input, filtered - * timer input or external trigger input) and the ) and the Slave - * mode (Disable, Reset, Gated, Trigger, External clock mode 1). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig) -{ - /* Check the parameters */ - assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); - assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); - - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - TIM_SlaveTimer_SetConfig(htim, sSlaveConfig); - - /* Disable Trigger Interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER); - - /* Disable Trigger DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; - } - -/** - * @brief Configures the TIM in Slave mode in interrupt mode - * @param htim: TIM handle. - * @param sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that - * contains the selected trigger (internal trigger input, filtered - * timer input or external trigger input) and the ) and the Slave - * mode (Disable, Reset, Gated, Trigger, External clock mode 1). - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, - TIM_SlaveConfigTypeDef * sSlaveConfig) - { - /* Check the parameters */ - assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance)); - assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode)); - assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger)); - - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - TIM_SlaveTimer_SetConfig(htim, sSlaveConfig); - - /* Enable Trigger Interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER); - - /* Disable Trigger DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER); - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Read the captured value from Capture Compare unit - * @param htim : TIM handle. - * @param Channel : TIM Channels to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1 : TIM Channel 1 selected - * @arg TIM_CHANNEL_2 : TIM Channel 2 selected - * @arg TIM_CHANNEL_3 : TIM Channel 3 selected - * @arg TIM_CHANNEL_4 : TIM Channel 4 selected - * @retval Captured value - */ -uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpreg = 0; - - __HAL_LOCK(htim); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - - /* Return the capture 1 value */ - tmpreg = htim->Instance->CCR1; - - break; - } - case TIM_CHANNEL_2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - - /* Return the capture 2 value */ - tmpreg = htim->Instance->CCR2; - - break; - } - - case TIM_CHANNEL_3: - { - /* Check the parameters */ - assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); - - /* Return the capture 3 value */ - tmpreg = htim->Instance->CCR3; - - break; - } - - case TIM_CHANNEL_4: - { - /* Check the parameters */ - assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); - - /* Return the capture 4 value */ - tmpreg = htim->Instance->CCR4; - - break; - } - - default: - break; - } - - __HAL_UNLOCK(htim); - return tmpreg; -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions - * @brief TIM Callbacks functions - * -@verbatim - ============================================================================== - ##### TIM Callbacks functions ##### - ============================================================================== - [..] - This section provides TIM callback functions: - (+) Timer Period elapsed callback - (+) Timer Output Compare callback - (+) Timer Input capture callback - (+) Timer Trigger callback - (+) Timer Error callback - -@endverbatim - * @{ - */ - -/** - * @brief Period elapsed callback in non blocking mode - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the __HAL_TIM_PeriodElapsedCallback could be implemented in the user file - */ - -} -/** - * @brief Output Compare callback in non blocking mode - * @param htim : TIM OC handle - * @retval None - */ -__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the __HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file - */ -} -/** - * @brief Input Capture callback in non blocking mode - * @param htim : TIM IC handle - * @retval None - */ -__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the __HAL_TIM_IC_CaptureCallback could be implemented in the user file - */ -} - -/** - * @brief PWM Pulse finished callback in non blocking mode - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the __HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file - */ -} - -/** - * @brief Hall Trigger detection callback in non blocking mode - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIM_TriggerCallback could be implemented in the user file - */ -} - -/** - * @brief Timer error callback in non blocking mode - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIM_ErrorCallback could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions_Group10 Peripheral State functions - * @brief Peripheral State functions - * -@verbatim - ============================================================================== - ##### Peripheral State functions ##### - ============================================================================== - [..] - This subsection permit to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the TIM Base state - * @param htim : TIM Base handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM OC state - * @param htim : TIM Ouput Compare handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM PWM state - * @param htim : TIM handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM Input Capture state - * @param htim : TIM IC handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM One Pulse Mode state - * @param htim : TIM OPM handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @brief Return the TIM Encoder Mode state - * @param htim : TIM Encoder handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup TIM_Private_Functions - * @{ - */ - -/** - * @brief TIM DMA error callback - * @param hdma : pointer to DMA handle. - * @retval None - */ -void TIM_DMAError(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - - htim->State= HAL_TIM_STATE_READY; - - HAL_TIM_ErrorCallback(htim); -} - -/** - * @brief TIM DMA Delay Pulse complete callback. - * @param hdma : pointer to DMA handle. - * @retval None - */ -void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - - htim->State= HAL_TIM_STATE_READY; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - } - - HAL_TIM_PWM_PulseFinishedCallback(htim); - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} -/** - * @brief TIM DMA Capture complete callback. - * @param hdma : pointer to DMA handle. - * @retval None - */ -void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - - htim->State= HAL_TIM_STATE_READY; - - if (hdma == htim->hdma[TIM_DMA_ID_CC1]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC2]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC3]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3; - } - else if (hdma == htim->hdma[TIM_DMA_ID_CC4]) - { - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4; - } - - HAL_TIM_IC_CaptureCallback(htim); - - htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED; -} - -/** - * @brief TIM DMA Period Elapse complete callback. - * @param hdma : pointer to DMA handle. - * @retval None - */ -static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - - htim->State= HAL_TIM_STATE_READY; - - HAL_TIM_PeriodElapsedCallback(htim); -} - -/** - * @brief TIM DMA Trigger callback. - * @param hdma : pointer to DMA handle. - * @retval None - */ -static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - - htim->State= HAL_TIM_STATE_READY; - - HAL_TIM_TriggerCallback(htim); -} - -/** - * @brief Time Base configuration - * @param TIMx : TIM periheral - * @param Structure : TIM Base configuration structure - * @retval None - */ -void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure) -{ - uint32_t tmpcr1 = 0; - tmpcr1 = TIMx->CR1; - - /* Set TIM Time Base Unit parameters ---------------------------------------*/ - if (IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx)) - { - /* Select the Counter Mode */ - tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS); - tmpcr1 |= Structure->CounterMode; - } - - if(IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx)) - { - /* Set the clock division */ - tmpcr1 &= ~TIM_CR1_CKD; - tmpcr1 |= (uint32_t)Structure->ClockDivision; - } - - TIMx->CR1 = tmpcr1; - - /* Set the Autoreload value */ - TIMx->ARR = (uint32_t)Structure->Period ; - - /* Set the Prescaler value */ - TIMx->PSC = (uint32_t)Structure->Prescaler; - - if (IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx)) - { - /* Set the Repetition Counter value */ - TIMx->RCR = Structure->RepetitionCounter; - } - - /* Generate an update event to reload the Prescaler - and the repetition counter(only for TIM1 and TIM8) value immediatly */ - TIMx->EGR = TIM_EGR_UG; -} - -/** - * @brief Time Ouput Compare 1 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config : The ouput configuration structure - * @retval None - */ -static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx = 0; - uint32_t tmpccer = 0; - uint32_t tmpcr2 = 0; - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= ~TIM_CCER_CC1E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= ~TIM_CCMR1_OC1M; - tmpccmrx &= ~TIM_CCMR1_CC1S; - /* Select the Output Compare Mode */ - tmpccmrx |= OC_Config->OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC1P; - /* Set the Output Compare Polarity */ - tmpccer |= OC_Config->OCPolarity; - - if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_1)) - { - /* Check parameters */ - assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); - - /* Reset the Output N Polarity level */ - tmpccer &= ~TIM_CCER_CC1NP; - /* Set the Output N Polarity */ - tmpccer |= OC_Config->OCNPolarity; - /* Reset the Output N State */ - tmpccer &= ~TIM_CCER_CC1NE; - } - - if(IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS1; - tmpcr2 &= ~TIM_CR2_OIS1N; - /* Set the Output Idle state */ - tmpcr2 |= OC_Config->OCIdleState; - /* Set the Output N Idle state */ - tmpcr2 |= OC_Config->OCNIdleState; - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR1 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Time Ouput Compare 2 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config : The ouput configuration structure - * @retval None - */ -void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx = 0; - uint32_t tmpccer = 0; - uint32_t tmpcr2 = 0; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC2E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= ~TIM_CCMR1_OC2M; - tmpccmrx &= ~TIM_CCMR1_CC2S; - - /* Select the Output Compare Mode */ - tmpccmrx |= (OC_Config->OCMode << 8); - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC2P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 4); - - if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_2)) - { - assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); - - /* Reset the Output N Polarity level */ - tmpccer &= ~TIM_CCER_CC2NP; - /* Set the Output N Polarity */ - tmpccer |= (OC_Config->OCNPolarity << 4); - /* Reset the Output N State */ - tmpccer &= ~TIM_CCER_CC2NE; - - } - - if(IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS2; - tmpcr2 &= ~TIM_CR2_OIS2N; - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 2); - /* Set the Output N Idle state */ - tmpcr2 |= (OC_Config->OCNIdleState << 2); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR2 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Time Ouput Compare 3 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config : The ouput configuration structure - * @retval None - */ -static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx = 0; - uint32_t tmpccer = 0; - uint32_t tmpcr2 = 0; - - /* Disable the Channel 3: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC3E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= ~TIM_CCMR2_OC3M; - tmpccmrx &= ~TIM_CCMR2_CC3S; - /* Select the Output Compare Mode */ - tmpccmrx |= OC_Config->OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC3P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 8); - - if(IS_TIM_CCXN_INSTANCE(TIMx, TIM_CHANNEL_3)) - { - assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity)); - - /* Reset the Output N Polarity level */ - tmpccer &= ~TIM_CCER_CC3NP; - /* Set the Output N Polarity */ - tmpccer |= (OC_Config->OCNPolarity << 8); - /* Reset the Output N State */ - tmpccer &= ~TIM_CCER_CC3NE; - } - - if(IS_TIM_BREAK_INSTANCE(TIMx)) - { - /* Check parameters */ - assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare and Output Compare N IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS3; - tmpcr2 &= ~TIM_CR2_OIS3N; - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 4); - /* Set the Output N Idle state */ - tmpcr2 |= (OC_Config->OCNIdleState << 4); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR3 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Time Ouput Compare 4 configuration - * @param TIMx to select the TIM peripheral - * @param OC_Config : The ouput configuration structure - * @retval None - */ -static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config) -{ - uint32_t tmpccmrx = 0; - uint32_t tmpccer = 0; - uint32_t tmpcr2 = 0; - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= ~TIM_CCER_CC4E; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare mode and Capture/Compare selection Bits */ - tmpccmrx &= ~TIM_CCMR2_OC4M; - tmpccmrx &= ~TIM_CCMR2_CC4S; - - /* Select the Output Compare Mode */ - tmpccmrx |= (OC_Config->OCMode << 8); - - /* Reset the Output Polarity level */ - tmpccer &= ~TIM_CCER_CC4P; - /* Set the Output Compare Polarity */ - tmpccer |= (OC_Config->OCPolarity << 12); - - if(IS_TIM_BREAK_INSTANCE(TIMx)) - { - assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState)); - - /* Reset the Output Compare IDLE State */ - tmpcr2 &= ~TIM_CR2_OIS4; - /* Set the Output Idle state */ - tmpcr2 |= (OC_Config->OCIdleState << 6); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Set the Capture Compare Register value */ - TIMx->CCR4 = OC_Config->Pulse; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - - -/** - * @brief Time Slave configuration - * @param htim: pointer to a TIM_HandleTypeDef structure that contains - * the configuration information for TIM module. - * @param sSlaveConfig: The slave configuration structure - * @retval None - */ -static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim, - TIM_SlaveConfigTypeDef * sSlaveConfig) -{ - uint32_t tmpsmcr = 0; - uint32_t tmpccmr1 = 0; - uint32_t tmpccer = 0; - - /* Get the TIMx SMCR register value */ - tmpsmcr = htim->Instance->SMCR; - - /* Reset the Trigger Selection Bits */ - tmpsmcr &= ~TIM_SMCR_TS; - /* Set the Input Trigger source */ - tmpsmcr |= sSlaveConfig->InputTrigger; - - /* Reset the slave mode Bits */ - tmpsmcr &= ~TIM_SMCR_SMS; - /* Set the slave mode */ - tmpsmcr |= sSlaveConfig->SlaveMode; - - /* Write to TIMx SMCR */ - htim->Instance->SMCR = tmpsmcr; - - /* Configure the trigger prescaler, filter, and polarity */ - switch (sSlaveConfig->InputTrigger) - { - case TIM_TS_ETRF: - { - /* Check the parameters */ - assert_param(IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler)); - assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - /* Configure the ETR Trigger source */ - TIM_ETR_SetConfig(htim->Instance, - sSlaveConfig->TriggerPrescaler, - sSlaveConfig->TriggerPolarity, - sSlaveConfig->TriggerFilter); - } - break; - - case TIM_TS_TI1F_ED: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - - /* Disable the Channel 1: Reset the CC1E Bit */ - tmpccer = htim->Instance->CCER; - htim->Instance->CCER &= ~TIM_CCER_CC1E; - tmpccmr1 = htim->Instance->CCMR1; - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC1F; - tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4); - - /* Write to TIMx CCMR1 and CCER registers */ - htim->Instance->CCMR1 = tmpccmr1; - htim->Instance->CCER = tmpccer; - - } - break; - - case TIM_TS_TI1FP1: - { - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - - /* Configure TI1 Filter and Polarity */ - TIM_TI1_ConfigInputStage(htim->Instance, - sSlaveConfig->TriggerPolarity, - sSlaveConfig->TriggerFilter); - } - break; - - case TIM_TS_TI2FP2: - { - /* Check the parameters */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity)); - assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter)); - - /* Configure TI2 Filter and Polarity */ - TIM_TI2_ConfigInputStage(htim->Instance, - sSlaveConfig->TriggerPolarity, - sSlaveConfig->TriggerFilter); - } - break; - - case TIM_TS_ITR0: - { - /* Check the parameter */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - } - break; - - case TIM_TS_ITR1: - { - /* Check the parameter */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - } - break; - - case TIM_TS_ITR2: - { - /* Check the parameter */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - } - break; - - case TIM_TS_ITR3: - { - /* Check the parameter */ - assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); - } - break; - - default: - break; - } -} - -/** - * @brief Configure the TI1 as Input. - * @param TIMx to select the TIM peripheral. - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection : specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 1 is selected to be connected to IC1. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 1 is selected to be connected to IC2. - * @arg TIM_ICSELECTION_TRC: TIM Input 1 is selected to be connected to TRC. - * @param TIM_ICFilter : Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 - * (on channel2 path) is used as the input signal. Therefore CCMR1 must be - * protected against un-initialized filter and polarity values. - */ -void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1 = 0; - uint32_t tmpccer = 0; - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= ~TIM_CCER_CC1E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Select the Input */ - if(IS_TIM_CC2_INSTANCE(TIMx) != RESET) - { - tmpccmr1 &= ~TIM_CCMR1_CC1S; - tmpccmr1 |= TIM_ICSelection; - } - else - { - tmpccmr1 |= TIM_CCMR1_CC1S_0; - } - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC1F; - tmpccmr1 |= ((TIM_ICFilter << 4) & TIM_CCMR1_IC1F); - - /* Select the Polarity and set the CC1E Bit */ - tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); - tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP)); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the Polarity and Filter for TI1. - * @param TIMx to select the TIM peripheral. - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICFilter : Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1 = 0; - uint32_t tmpccer = 0; - - /* Disable the Channel 1: Reset the CC1E Bit */ - tmpccer = TIMx->CCER; - TIMx->CCER &= ~TIM_CCER_CC1E; - tmpccmr1 = TIMx->CCMR1; - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC1F; - tmpccmr1 |= (TIM_ICFilter << 4); - - /* Select the Polarity and set the CC1E Bit */ - tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP); - tmpccer |= TIM_ICPolarity; - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI2 as Input. - * @param TIMx to select the TIM peripheral - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection : specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 2 is selected to be connected to IC2. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 2 is selected to be connected to IC1. - * @arg TIM_ICSELECTION_TRC: TIM Input 2 is selected to be connected to TRC. - * @param TIM_ICFilter : Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 - * (on channel1 path) is used as the input signal. Therefore CCMR1 must be - * protected against un-initialized filter and polarity values. - */ -static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1 = 0; - uint32_t tmpccer = 0; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC2E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Select the Input */ - tmpccmr1 &= ~TIM_CCMR1_CC2S; - tmpccmr1 |= (TIM_ICSelection << 8); - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC2F; - tmpccmr1 |= ((TIM_ICFilter << 12) & TIM_CCMR1_IC2F); - - /* Select the Polarity and set the CC2E Bit */ - tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); - tmpccer |= ((TIM_ICPolarity << 4) & (TIM_CCER_CC2P | TIM_CCER_CC2NP)); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1 ; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the Polarity and Filter for TI2. - * @param TIMx to select the TIM peripheral. - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICFilter : Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr1 = 0; - uint32_t tmpccer = 0; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= ~TIM_CCER_CC2E; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Set the filter */ - tmpccmr1 &= ~TIM_CCMR1_IC2F; - tmpccmr1 |= (TIM_ICFilter << 12); - - /* Select the Polarity and set the CC2E Bit */ - tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP); - tmpccer |= (TIM_ICPolarity << 4); - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1 ; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI3 as Input. - * @param TIMx to select the TIM peripheral - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection : specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 3 is selected to be connected to IC3. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 3 is selected to be connected to IC4. - * @arg TIM_ICSELECTION_TRC: TIM Input 3 is selected to be connected to TRC. - * @param TIM_ICFilter : Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 - * (on channel1 path) is used as the input signal. Therefore CCMR2 must be - * protected against un-initialized filter and polarity values. - */ -static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr2 = 0; - uint32_t tmpccer = 0; - - /* Disable the Channel 3: Reset the CC3E Bit */ - TIMx->CCER &= ~TIM_CCER_CC3E; - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - - /* Select the Input */ - tmpccmr2 &= ~TIM_CCMR2_CC3S; - tmpccmr2 |= TIM_ICSelection; - - /* Set the filter */ - tmpccmr2 &= ~TIM_CCMR2_IC3F; - tmpccmr2 |= ((TIM_ICFilter << 4) & TIM_CCMR2_IC3F); - - /* Select the Polarity and set the CC3E Bit */ - tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP); - tmpccer |= ((TIM_ICPolarity << 8) & (TIM_CCER_CC3P | TIM_CCER_CC3NP)); - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI4 as Input. - * @param TIMx to select the TIM peripheral - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPOLARITY_RISING - * @arg TIM_ICPOLARITY_FALLING - * @arg TIM_ICPOLARITY_BOTHEDGE - * @param TIM_ICSelection : specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSELECTION_DIRECTTI: TIM Input 4 is selected to be connected to IC4. - * @arg TIM_ICSELECTION_INDIRECTTI: TIM Input 4 is selected to be connected to IC3. - * @arg TIM_ICSELECTION_TRC: TIM Input 4 is selected to be connected to TRC. - * @param TIM_ICFilter : Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 - * (on channel1 path) is used as the input signal. Therefore CCMR2 must be - * protected against un-initialized filter and polarity values. - * @retval None - */ -static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, - uint32_t TIM_ICFilter) -{ - uint32_t tmpccmr2 = 0; - uint32_t tmpccer = 0; - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= ~TIM_CCER_CC4E; - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - - /* Select the Input */ - tmpccmr2 &= ~TIM_CCMR2_CC4S; - tmpccmr2 |= (TIM_ICSelection << 8); - - /* Set the filter */ - tmpccmr2 &= ~TIM_CCMR2_IC4F; - tmpccmr2 |= ((TIM_ICFilter << 12) & TIM_CCMR2_IC4F); - - /* Select the Polarity and set the CC4E Bit */ - tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP); - tmpccer |= ((TIM_ICPolarity << 12) & (TIM_CCER_CC4P | TIM_CCER_CC4NP)); - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer ; -} - -/** - * @brief Selects the Input Trigger source - * @param TIMx to select the TIM peripheral - * @param InputTriggerSource : The Input Trigger source. - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0 : Internal Trigger 0 - * @arg TIM_TS_ITR1 : Internal Trigger 1 - * @arg TIM_TS_ITR2 : Internal Trigger 2 - * @arg TIM_TS_ITR3 : Internal Trigger 3 - * @arg TIM_TS_TI1F_ED : TI1 Edge Detector - * @arg TIM_TS_TI1FP1 : Filtered Timer Input 1 - * @arg TIM_TS_TI2FP2 : Filtered Timer Input 2 - * @arg TIM_TS_ETRF : External Trigger input - * @retval None - */ -static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint16_t InputTriggerSource) -{ - uint32_t tmpsmcr = 0; - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - /* Reset the TS Bits */ - tmpsmcr &= ~TIM_SMCR_TS; - /* Set the Input Trigger source and the slave mode*/ - tmpsmcr |= InputTriggerSource | TIM_SLAVEMODE_EXTERNAL1; - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} -/** - * @brief Configures the TIMx External Trigger (ETR). - * @param TIMx to select the TIM peripheral - * @param TIM_ExtTRGPrescaler : The external Trigger Prescaler. - * This parameter can be one of the following values: - * @arg TIM_ETRPRESCALER_DIV1: ETRP Prescaler OFF. - * @arg TIM_ETRPRESCALER_DIV2: ETRP frequency divided by 2. - * @arg TIM_ETRPRESCALER_DIV4: ETRP frequency divided by 4. - * @arg TIM_ETRPRESCALER_DIV8: ETRP frequency divided by 8. - * @param TIM_ExtTRGPolarity : The external Trigger Polarity. - * This parameter can be one of the following values: - * @arg TIM_ETRPOLARITY_INVERTED: active low or falling edge active. - * @arg TIM_ETRPOLARITY_NONINVERTED: active high or rising edge active. - * @param ExtTRGFilter : External Trigger Filter. - * This parameter must be a value between 0x00 and 0x0F - * @retval None - */ -static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler, - uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter) -{ - uint32_t tmpsmcr = 0; - - tmpsmcr = TIMx->SMCR; - - /* Reset the ETR Bits */ - tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP); - - /* Set the Prescaler, the Filter value and the Polarity */ - tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8))); - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/** - * @brief Enables or disables the TIM Capture Compare Channel x. - * @param TIMx to select the TIM peripheral - * @param Channel : specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 - * @arg TIM_CHANNEL_2: TIM Channel 2 - * @arg TIM_CHANNEL_3: TIM Channel 3 - * @arg TIM_CHANNEL_4: TIM Channel 4 - * @param ChannelState : specifies the TIM Channel CCxE bit new state. - * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_Disable. - * @retval None - */ -void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState) -{ - uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_TIM_CC1_INSTANCE(TIMx)); - assert_param(IS_TIM_CHANNELS(Channel)); - - tmp = TIM_CCER_CC1E << Channel; - - /* Reset the CCxE Bit */ - TIMx->CCER &= ~tmp; - - /* Set or reset the CCxE Bit */ - TIMx->CCER |= (uint32_t)(ChannelState << Channel); -} - -/** - * @} - */ - -#endif /* HAL_TIM_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c deleted file mode 100644 index 75d4584..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c +++ /dev/null @@ -1,1857 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_tim_ex.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief TIM HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Timer Extended peripheral: - * + Time Hall Sensor Interface Initialization - * + Time Hall Sensor Interface Start - * + Time Complementary signal bread and dead time configuration - * + Time Master and Slave synchronization configuration - * + Timer remapping capabilities configuration - @verbatim - ============================================================================== - ##### TIMER Extended features ##### - ============================================================================== - [..] - The Timer Extended features include: - (#) Complementary outputs with programmable dead-time for : - (++) Output Compare - (++) PWM generation (Edge and Center-aligned Mode) - (++) One-pulse mode output - (#) Synchronization circuit to control the timer with external signals and to - interconnect several timers together. - (#) Break input to put the timer output signals in reset state or in a known state. - (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for - positioning purposes - - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Initialize the TIM low level resources by implementing the following functions - depending from feature used : - (++) Complementary Output Compare : HAL_TIM_OC_MspInit() - (++) Complementary PWM generation : HAL_TIM_PWM_MspInit() - (++) Complementary One-pulse mode output : HAL_TIM_OnePulse_MspInit() - (++) Hall Sensor output : HAL_TIMEx_HallSensor_MspInit() - - (#) Initialize the TIM low level resources : - (##) Enable the TIM interface clock using __HAL_RCC_TIMx_CLK_ENABLE(); - (##) TIM pins configuration - (+++) Enable the clock for the TIM GPIOs using the following function: - __HAL_RCC_GPIOx_CLK_ENABLE(); - (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init(); - - (#) The external Clock can be configured, if needed (the default clock is the - internal clock from the APBx), using the following function: - HAL_TIM_ConfigClockSource, the clock configuration should be done before - any start function. - - (#) Configure the TIM in the desired functioning mode using one of the - initialization function of this driver: - (++) HAL_TIMEx_HallSensor_Init and HAL_TIMEx_ConfigCommutationEvent: to use the - Timer Hall Sensor Interface and the commutation event with the corresponding - Interrupt and DMA request if needed (Note that One Timer is used to interface - with the Hall sensor Interface and another Timer should be used to use - the commutation event). - - (#) Activate the TIM peripheral using one of the start functions: - (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OCN_Start_IT() - (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT() - (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT() - (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT(). - - - @endverbatim - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** -*/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup TIMEx TIMEx - * @brief TIM Extended HAL module driver - * @{ - */ - -#ifdef HAL_TIM_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ - -#if defined (STM32F100xB) || defined (STM32F100xE) || \ - defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \ - defined (STM32F105xC) || defined (STM32F107xC) -/** @defgroup TIMEx_Private_Functions TIMEx Private Functions - * @{ - */ -static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState); -/** - * @} - */ -#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */ - /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */ - /* defined(STM32F105xC) || defined(STM32F107xC) */ - -/* Exported functions ---------------------------------------------------------*/ - -/** @defgroup TIMEx_Exported_Functions TIMEx Exported Functions - * @{ - */ - - -/** @defgroup TIMEx_Exported_Functions_Group1 Timer Hall Sensor functions - * @brief Timer Hall Sensor functions - * -@verbatim - ============================================================================== - ##### Timer Hall Sensor functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Initialize and configure TIM HAL Sensor. - (+) De-initialize TIM HAL Sensor. - (+) Start the Hall Sensor Interface. - (+) Stop the Hall Sensor Interface. - (+) Start the Hall Sensor Interface and enable interrupts. - (+) Stop the Hall Sensor Interface and disable interrupts. - (+) Start the Hall Sensor Interface and enable DMA transfers. - (+) Stop the Hall Sensor Interface and disable DMA transfers. - -@endverbatim - * @{ - */ -/** - * @brief Initializes the TIM Hall Sensor Interface and create the associated handle. - * @param htim : TIM Encoder Interface handle - * @param sConfig : TIM Hall Sensor configuration structure - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig) -{ - TIM_OC_InitTypeDef OC_Config; - - /* Check the TIM handle allocation */ - if(htim == NULL) - { - return HAL_ERROR; - } - - assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); - assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode)); - assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); - assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity)); - assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler)); - assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter)); - - if(htim->State == HAL_TIM_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - htim->Lock = HAL_UNLOCKED; - - /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */ - HAL_TIMEx_HallSensor_MspInit(htim); - } - - /* Set the TIM state */ - htim->State= HAL_TIM_STATE_BUSY; - - /* Configure the Time base in the Encoder Mode */ - TIM_Base_SetConfig(htim->Instance, &htim->Init); - - /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */ - TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter); - - /* Reset the IC1PSC Bits */ - htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC; - /* Set the IC1PSC value */ - htim->Instance->CCMR1 |= sConfig->IC1Prescaler; - - /* Enable the Hall sensor interface (XOR function of the three inputs) */ - htim->Instance->CR2 |= TIM_CR2_TI1S; - - /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= TIM_TS_TI1F_ED; - - /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */ - htim->Instance->SMCR &= ~TIM_SMCR_SMS; - htim->Instance->SMCR |= TIM_SLAVEMODE_RESET; - - /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/ - OC_Config.OCFastMode = TIM_OCFAST_DISABLE; - OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET; - OC_Config.OCMode = TIM_OCMODE_PWM2; - OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET; - OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH; - OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH; - OC_Config.Pulse = sConfig->Commutation_Delay; - - TIM_OC2_SetConfig(htim->Instance, &OC_Config); - - /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2 - register to 101 */ - htim->Instance->CR2 &= ~TIM_CR2_MMS; - htim->Instance->CR2 |= TIM_TRGO_OC2REF; - - /* Initialize the TIM state*/ - htim->State= HAL_TIM_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the TIM Hall Sensor interface - * @param htim : TIM Hall Sensor handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_INSTANCE(htim->Instance)); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Disable the TIM Peripheral Clock */ - __HAL_TIM_DISABLE(htim); - - /* DeInit the low level hardware: GPIO, CLOCK, NVIC */ - HAL_TIMEx_HallSensor_MspDeInit(htim); - - /* Change TIM state */ - htim->State = HAL_TIM_STATE_RESET; - - /* Release Lock */ - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Initializes the TIM Hall Sensor MSP. - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file - */ -} - -/** - * @brief DeInitializes TIM Hall Sensor MSP. - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file - */ -} - -/** - * @brief Starts the TIM Hall Sensor Interface. - * @param htim : TIM Hall Sensor handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); - - /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the 3 possible channels that are used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Hall sensor Interface. - * @param htim : TIM Hall Sensor handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channel 1 - (in the Hall Sensor Interface the 3 possible channels that are used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Hall Sensor Interface in interrupt mode. - * @param htim : TIM Hall Sensor handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); - - /* Enable the capture compare Interrupts 1 event */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - - /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the 3 possible channels that are used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Hall Sensor Interface in interrupt mode. - * @param htim : TIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channel 1 - (in the Hall Sensor Interface the 3 possible channels that are used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - /* Disable the capture compare Interrupts event */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Hall Sensor Interface in DMA mode. - * @param htim : TIM Hall Sensor handle - * @param pData : The destination Buffer address. - * @param Length : The length of data to be transferred from TIM peripheral to memory. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) -{ - /* Check the parameters */ - assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); - - if((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if((htim->State == HAL_TIM_STATE_READY)) - { - if(((uint32_t)pData == 0 ) && (Length > 0)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - /* Enable the Input Capture channel 1 - (in the Hall Sensor Interface the 3 possible channels that are used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); - - /* Set the DMA Input Capture 1 Callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt; - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel for Capture 1*/ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length); - - /* Enable the capture compare 1 Interrupt */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Hall Sensor Interface in DMA mode. - * @param htim : TIM handle - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim) -{ - /* Check the parameters */ - assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); - - /* Disable the Input Capture channel 1 - (in the Hall Sensor Interface the 3 possible channels that are used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */ - TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); - - - /* Disable the capture compare Interrupts 1 event */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -#if defined (STM32F100xB) || defined (STM32F100xE) || \ - defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \ - defined (STM32F105xC) || defined (STM32F107xC) - -/** @defgroup TIMEx_Exported_Functions_Group2 Timer Complementary Output Compare functions - * @brief Timer Complementary Output Compare functions - * -@verbatim - ============================================================================== - ##### Timer Complementary Output Compare functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Start the Complementary Output Compare/PWM. - (+) Stop the Complementary Output Compare/PWM. - (+) Start the Complementary Output Compare/PWM and enable interrupts. - (+) Stop the Complementary Output Compare/PWM and disable interrupts. - (+) Start the Complementary Output Compare/PWM and enable DMA transfers. - (+) Stop the Complementary Output Compare/PWM and disable DMA transfers. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the TIM Output Compare signal generation on the complementary - * output. - * @param htim : TIM Output Compare handle - * @param Channel : TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Ouput */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation on the complementary - * output. - * @param htim : TIM handle - * @param Channel : TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Ouput */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Output Compare signal generation in interrupt mode - * on the complementary output. - * @param htim : TIM OC handle - * @param Channel : TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Output Compare interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Enable the TIM Output Compare interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Enable the TIM Output Compare interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Enable the TIM Output Compare interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - } - break; - - default: - break; - } - - /* Enable the TIM Break interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); - - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Ouput */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation in interrupt mode - * on the complementary output. - * @param htim : TIM Output Compare handle - * @param Channel : TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - } - break; - - default: - break; - } - - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the TIM Break interrupt (only if no more channel is active) */ - tmpccer = htim->Instance->CCER; - if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET) - { - __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); - } - - /* Disable the Main Ouput */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM Output Compare signal generation in DMA mode - * on the complementary output. - * @param htim : TIM Output Compare handle - * @param Channel : TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData : The source Buffer address. - * @param Length : The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - if((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if((htim->State == HAL_TIM_STATE_READY)) - { - if(((uint32_t)pData == 0 ) && (Length > 0)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length); - - /* Enable the TIM Output Compare DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length); - - /* Enable the TIM Output Compare DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - } - break; - - case TIM_CHANNEL_3: -{ - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length); - - /* Enable the TIM Output Compare DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length); - - /* Enable the TIM Output Compare DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - } - break; - - default: - break; - } - - /* Enable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Ouput */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM Output Compare signal generation in DMA mode - * on the complementary output. - * @param htim : TIM Output Compare handle - * @param Channel : TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Output Compare DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Disable the TIM Output Compare DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Disable the TIM Output Compare DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Disable the TIM Output Compare interrupt */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - } - break; - - default: - break; - } - - /* Disable the Capture compare channel N */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Ouput */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group3 Timer Complementary PWM functions - * @brief Timer Complementary PWM functions - * -@verbatim - ============================================================================== - ##### Timer Complementary PWM functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Start the Complementary PWM. - (+) Stop the Complementary PWM. - (+) Start the Complementary PWM and enable interrupts. - (+) Stop the Complementary PWM and disable interrupts. - (+) Start the Complementary PWM and enable DMA transfers. - (+) Stop the Complementary PWM and disable DMA transfers. - (+) Start the Complementary Input Capture measurement. - (+) Stop the Complementary Input Capture. - (+) Start the Complementary Input Capture and enable interrupts. - (+) Stop the Complementary Input Capture and disable interrupts. - (+) Start the Complementary Input Capture and enable DMA transfers. - (+) Stop the Complementary Input Capture and disable DMA transfers. - (+) Start the Complementary One Pulse generation. - (+) Stop the Complementary One Pulse. - (+) Start the Complementary One Pulse and enable interrupts. - (+) Stop the Complementary One Pulse and disable interrupts. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the PWM signal generation on the complementary output. - * @param htim : TIM handle - * @param Channel : TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Ouput */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the PWM signal generation on the complementary output. - * @param htim : TIM handle - * @param Channel : TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Ouput */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the PWM signal generation in interrupt mode on the - * complementary output. - * @param htim : TIM handle - * @param Channel : TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Enable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Enable the TIM Capture/Compare 4 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4); - } - break; - - default: - break; - } - - /* Enable the TIM Break interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK); - - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Ouput */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the PWM signal generation in interrupt mode on the - * complementary output. - * @param htim : TIM handle - * @param Channel : TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel) -{ - uint32_t tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 3 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4); - } - break; - - default: - break; - } - - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the TIM Break interrupt (only if no more channel is active) */ - tmpccer = htim->Instance->CCER; - if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET) - { - __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK); - } - - /* Disable the Main Ouput */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM PWM signal generation in DMA mode on the - * complementary output - * @param htim : TIM handle - * @param Channel : TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData : The source Buffer address. - * @param Length : The length of data to be transferred from memory to TIM peripheral - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - if((htim->State == HAL_TIM_STATE_BUSY)) - { - return HAL_BUSY; - } - else if((htim->State == HAL_TIM_STATE_READY)) - { - if(((uint32_t)pData == 0 ) && (Length > 0)) - { - return HAL_ERROR; - } - else - { - htim->State = HAL_TIM_STATE_BUSY; - } - } - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length); - - /* Enable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length); - - /* Enable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length); - - /* Enable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Set the DMA Period elapsed callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt; - - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ; - - /* Enable the DMA channel */ - HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length); - - /* Enable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4); - } - break; - - default: - break; - } - - /* Enable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE); - - /* Enable the Main Ouput */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Enable the Peripheral */ - __HAL_TIM_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM PWM signal generation in DMA mode on the complementary - * output - * @param htim : TIM handle - * @param Channel : TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); - - switch (Channel) - { - case TIM_CHANNEL_1: - { - /* Disable the TIM Capture/Compare 1 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1); - } - break; - - case TIM_CHANNEL_2: - { - /* Disable the TIM Capture/Compare 2 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2); - } - break; - - case TIM_CHANNEL_3: - { - /* Disable the TIM Capture/Compare 3 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3); - } - break; - - case TIM_CHANNEL_4: - { - /* Disable the TIM Capture/Compare 4 DMA request */ - __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4); - } - break; - - default: - break; - } - - /* Disable the complementary PWM output */ - TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE); - - /* Disable the Main Ouput */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Change the htim state */ - htim->State = HAL_TIM_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group4 Timer Complementary One Pulse functions - * @brief Timer Complementary One Pulse functions - * -@verbatim - ============================================================================== - ##### Timer Complementary One Pulse functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Start the Complementary One Pulse generation. - (+) Stop the Complementary One Pulse. - (+) Start the Complementary One Pulse and enable interrupts. - (+) Stop the Complementary One Pulse and disable interrupts. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the TIM One Pulse signal generation on the complemetary - * output. - * @param htim : TIM One Pulse handle - * @param OutputChannel : TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel) - { - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Enable the complementary One Pulse output */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); - - /* Enable the Main Ouput */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Stops the TIM One Pulse signal generation on the complementary - * output. - * @param htim : TIM One Pulse handle - * @param OutputChannel : TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Disable the complementary One Pulse output */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); - - /* Disable the Main Ouput */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Starts the TIM One Pulse signal generation in interrupt mode on the - * complementary channel. - * @param htim : TIM One Pulse handle - * @param OutputChannel : TIM Channel to be enabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Enable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1); - - /* Enable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); - - /* Enable the complementary One Pulse output */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); - - /* Enable the Main Ouput */ - __HAL_TIM_MOE_ENABLE(htim); - - /* Return function status */ - return HAL_OK; - } - -/** - * @brief Stops the TIM One Pulse signal generation in interrupt mode on the - * complementary channel. - * @param htim : TIM One Pulse handle - * @param OutputChannel : TIM Channel to be disabled - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel) -{ - /* Check the parameters */ - assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); - - /* Disable the TIM Capture/Compare 1 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1); - - /* Disable the TIM Capture/Compare 2 interrupt */ - __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2); - - /* Disable the complementary One Pulse output */ - TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE); - - /* Disable the Main Ouput */ - __HAL_TIM_MOE_DISABLE(htim); - - /* Disable the Peripheral */ - __HAL_TIM_DISABLE(htim); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */ - /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */ - /* defined(STM32F105xC) || defined(STM32F107xC) */ - -/** @defgroup TIMEx_Exported_Functions_Group5 Peripheral Control functions - * @brief Peripheral Control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This section provides functions allowing to: - (+) Configure the commutation event in case of use of the Hall sensor interface. - (+) Configure Complementary channels, break features and dead time. - (+) Configure Master synchronization. - -@endverbatim - * @{ - */ - -#if defined (STM32F100xB) || defined (STM32F100xE) || \ - defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \ - defined (STM32F105xC) || defined (STM32F107xC) - -/** - * @brief Configure the TIM commutation event sequence. - * @note: this function is mandatory to use the commutation event in order to - * update the configuration at each commutation detection on the TRGI input of the Timer, - * the typical use of this feature is with the use of another Timer(interface Timer) - * configured in Hall sensor interface, this interface Timer will generate the - * commutation at its TRGO output (connected to Timer used in this function) each time - * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @param htim : TIM handle - * @param InputTrigger : the Internal trigger corresponding to the Timer Interfacing with the Hall sensor - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal trigger 0 selected - * @arg TIM_TS_ITR1: Internal trigger 1 selected - * @arg TIM_TS_ITR2: Internal trigger 2 selected - * @arg TIM_TS_ITR3: Internal trigger 3 selected - * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource : the Commutation Event source - * This parameter can be one of the following values: - * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer - * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); - assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); - - __HAL_LOCK(htim); - - if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || - (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) - { - /* Select the Input trigger */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= InputTrigger; - } - - /* Select the Capture Compare preload feature */ - htim->Instance->CR2 |= TIM_CR2_CCPC; - /* Select the Commutation event source */ - htim->Instance->CR2 &= ~TIM_CR2_CCUS; - htim->Instance->CR2 |= CommutationSource; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configure the TIM commutation event sequence with interrupt. - * @note: this function is mandatory to use the commutation event in order to - * update the configuration at each commutation detection on the TRGI input of the Timer, - * the typical use of this feature is with the use of another Timer(interface Timer) - * configured in Hall sensor interface, this interface Timer will generate the - * commutation at its TRGO output (connected to Timer used in this function) each time - * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @param htim : TIM handle - * @param InputTrigger : the Internal trigger corresponding to the Timer Interfacing with the Hall sensor - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal trigger 0 selected - * @arg TIM_TS_ITR1: Internal trigger 1 selected - * @arg TIM_TS_ITR2: Internal trigger 2 selected - * @arg TIM_TS_ITR3: Internal trigger 3 selected - * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource : the Commutation Event source - * This parameter can be one of the following values: - * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer - * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); - assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); - - __HAL_LOCK(htim); - - if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || - (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) - { - /* Select the Input trigger */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= InputTrigger; - } - - /* Select the Capture Compare preload feature */ - htim->Instance->CR2 |= TIM_CR2_CCPC; - /* Select the Commutation event source */ - htim->Instance->CR2 &= ~TIM_CR2_CCUS; - htim->Instance->CR2 |= CommutationSource; - - /* Enable the Commutation Interrupt Request */ - __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM); - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configure the TIM commutation event sequence with DMA. - * @note: this function is mandatory to use the commutation event in order to - * update the configuration at each commutation detection on the TRGI input of the Timer, - * the typical use of this feature is with the use of another Timer(interface Timer) - * configured in Hall sensor interface, this interface Timer will generate the - * commutation at its TRGO output (connected to Timer used in this function) each time - * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @note: The user should configure the DMA in his own software, in This function only the COMDE bit is set - * @param htim : TIM handle - * @param InputTrigger : the Internal trigger corresponding to the Timer Interfacing with the Hall sensor - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal trigger 0 selected - * @arg TIM_TS_ITR1: Internal trigger 1 selected - * @arg TIM_TS_ITR2: Internal trigger 2 selected - * @arg TIM_TS_ITR3: Internal trigger 3 selected - * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource : the Commutation Event source - * This parameter can be one of the following values: - * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer - * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_COMMUTATION_EVENT_INSTANCE(htim->Instance)); - assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger)); - - __HAL_LOCK(htim); - - if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) || - (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3)) - { - /* Select the Input trigger */ - htim->Instance->SMCR &= ~TIM_SMCR_TS; - htim->Instance->SMCR |= InputTrigger; - } - - /* Select the Capture Compare preload feature */ - htim->Instance->CR2 |= TIM_CR2_CCPC; - /* Select the Commutation event source */ - htim->Instance->CR2 &= ~TIM_CR2_CCUS; - htim->Instance->CR2 |= CommutationSource; - - /* Enable the Commutation DMA Request */ - /* Set the DMA Commutation Callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt; - /* Set the DMA error callback */ - htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError; - - /* Enable the Commutation DMA Request */ - __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM); - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State - * and the AOE(automatic output enable). - * @param htim : TIM handle - * @param sBreakDeadTimeConfig : pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that - * contains the BDTR Register configuration information for the TIM peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, - TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig) -{ - /* Check the parameters */ - assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance)); - assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode)); - assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode)); - assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel)); - assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime)); - assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState)); - assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity)); - assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput)); - - /* Process Locked */ - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State, - the OSSI State, the dead time value and the Automatic Output Enable Bit */ - htim->Instance->BDTR = (uint32_t)sBreakDeadTimeConfig->OffStateRunMode | - sBreakDeadTimeConfig->OffStateIDLEMode | - sBreakDeadTimeConfig->LockLevel | - sBreakDeadTimeConfig->DeadTime | - sBreakDeadTimeConfig->BreakState | - sBreakDeadTimeConfig->BreakPolarity | - sBreakDeadTimeConfig->AutomaticOutput; - - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */ - /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */ - /* defined(STM32F105xC) || defined(STM32F107xC) */ - -/** - * @brief Configures the TIM in master mode. - * @param htim : TIM handle. - * @param sMasterConfig : pointer to a TIM_MasterConfigTypeDef structure that - * contains the selected trigger output (TRGO) and the Master/Slave - * mode. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig) -{ - /* Check the parameters */ - assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance)); - assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger)); - assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode)); - - __HAL_LOCK(htim); - - htim->State = HAL_TIM_STATE_BUSY; - - /* Reset the MMS Bits */ - htim->Instance->CR2 &= ~TIM_CR2_MMS; - /* Select the TRGO source */ - htim->Instance->CR2 |= sMasterConfig->MasterOutputTrigger; - - /* Reset the MSM Bit */ - htim->Instance->SMCR &= ~TIM_SMCR_MSM; - /* Set or Reset the MSM Bit */ - htim->Instance->SMCR |= sMasterConfig->MasterSlaveMode; - - htim->State = HAL_TIM_STATE_READY; - - __HAL_UNLOCK(htim); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup TIMEx_Exported_Functions_Group6 Extension Callbacks functions - * @brief Extension Callbacks functions - * -@verbatim - ============================================================================== - ##### Extension Callbacks functions ##### - ============================================================================== - [..] - This section provides Extension TIM callback functions: - (+) Timer Commutation callback - (+) Timer Break callback - -@endverbatim - * @{ - */ - -/** - * @brief Hall commutation changed callback in non blocking mode - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIMEx_CommutationCallback could be implemented in the user file - */ -} - -/** - * @brief Hall Break detection callback in non blocking mode - * @param htim : TIM handle - * @retval None - */ -__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(htim); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_TIMEx_BreakCallback could be implemented in the user file - */ -} - -/** - * @brief TIM DMA Commutation callback. - * @param hdma : pointer to DMA handle. - * @retval None - */ -void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma) -{ - TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - - htim->State= HAL_TIM_STATE_READY; - - HAL_TIMEx_CommutationCallback(htim); -} - -/** - * @} - */ - -#if defined (STM32F100xB) || defined (STM32F100xE) || \ - defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \ - defined (STM32F105xC) || defined (STM32F107xC) - -/** @defgroup TIMEx_Exported_Functions_Group7 Extension Peripheral State functions - * @brief Extension Peripheral State functions - * -@verbatim - ============================================================================== - ##### Extension Peripheral State functions ##### - ============================================================================== - [..] - This subsection permit to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Return the TIM Hall Sensor interface state - * @param htim : TIM Hall Sensor handle - * @retval HAL state - */ -HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim) -{ - return htim->State; -} - -/** - * @} - */ -#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */ - /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */ - /* defined(STM32F105xC) || defined(STM32F107xC) */ - -/** - * @} - */ - -#if defined (STM32F100xB) || defined (STM32F100xE) || \ - defined (STM32F103x6) || defined (STM32F103xB) || defined (STM32F103xE) || defined (STM32F103xG) || \ - defined (STM32F105xC) || defined (STM32F107xC) - -/** @addtogroup TIMEx_Private_Functions - * @{ - */ - -/** - * @brief Enables or disables the TIM Capture Compare Channel xN. - * @param TIMx to select the TIM peripheral - * @param Channel : specifies the TIM Channel - * This parameter can be one of the following values: - * @arg TIM_Channel_1: TIM Channel 1 - * @arg TIM_Channel_2: TIM Channel 2 - * @arg TIM_Channel_3: TIM Channel 3 - * @param ChannelNState : specifies the TIM Channel CCxNE bit new state. - * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. - * @retval None - */ -static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState) -{ - uint32_t tmp = 0; - - tmp = TIM_CCER_CC1NE << Channel; - - /* Reset the CCxNE Bit */ - TIMx->CCER &= ~tmp; - - /* Set or reset the CCxNE Bit */ - TIMx->CCER |= (uint32_t)(ChannelNState << Channel); -} - -/** - * @} - */ - -#endif /* defined(STM32F100xB) || defined(STM32F100xE) || */ - /* defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || defined(STM32F103xG) || */ - /* defined(STM32F105xC) || defined(STM32F107xC) */ - -#endif /* HAL_TIM_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c deleted file mode 100644 index 8f06df7..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c +++ /dev/null @@ -1,1921 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_uart.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief UART HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Universal Asynchronous Receiver Transmitter (UART) peripheral: - * + Initialization and de-initialization functions - * + IO operation functions - * + Peripheral Control functions - * + Peripheral State and Errors functions - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - The UART HAL driver can be used as follows: - - (#) Declare a UART_HandleTypeDef handle structure. - - (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API: - (##) Enable the USARTx interface clock. - (##) UART pins configuration: - (+++) Enable the clock for the UART GPIOs. - (+++) Configure the USART pins (TX as alternate function pull-up, RX as alternate function Input). - (##) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT() - and HAL_UART_Receive_IT() APIs): - (+++) Configure the USARTx interrupt priority. - (+++) Enable the NVIC USART IRQ handle. - (##) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA() - and HAL_UART_Receive_DMA() APIs): - (+++) Declare a DMA handle structure for the Tx/Rx channel. - (+++) Enable the DMAx interface clock. - (+++) Configure the declared DMA handle structure with the required - Tx/Rx parameters. - (+++) Configure the DMA Tx/Rx channel. - (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle. - (+++) Configure the priority and enable the NVIC for the transfer complete - interrupt on the DMA Tx/Rx channel. - (+++) Configure the USARTx interrupt priority and enable the NVIC USART IRQ handle - (used for last byte sending completion detection in DMA non circular mode) - - (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware - flow control and Mode(Receiver/Transmitter) in the huart Init structure. - - (#) For the UART asynchronous mode, initialize the UART registers by calling - the HAL_UART_Init() API. - - (#) For the UART Half duplex mode, initialize the UART registers by calling - the HAL_HalfDuplex_Init() API. - - (#) For the LIN mode, initialize the UART registers by calling the HAL_LIN_Init() API. - - (#) For the Multi-Processor mode, initialize the UART registers by calling - the HAL_MultiProcessor_Init() API. - - [..] - (@) The specific UART interrupts (Transmission complete interrupt, - RXNE interrupt and Error Interrupts) will be managed using the macros - __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() inside the transmit - and receive process. - - [..] - (@) These APIs (HAL_UART_Init() and HAL_HalfDuplex_Init()) configure also the - low level Hardware GPIO, CLOCK, CORTEX...etc) by calling the customed - HAL_UART_MspInit() API. - - [..] - Three operation modes are available within this driver : - - *** Polling mode IO operation *** - ================================= - [..] - (+) Send an amount of data in blocking mode using HAL_UART_Transmit() - (+) Receive an amount of data in blocking mode using HAL_UART_Receive() - - *** Interrupt mode IO operation *** - =================================== - [..] - (+) Send an amount of data in non blocking mode using HAL_UART_Transmit_IT() - (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_UART_TxCpltCallback - (+) Receive an amount of data in non blocking mode using HAL_UART_Receive_IT() - (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_UART_RxCpltCallback - (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_UART_ErrorCallback - - *** DMA mode IO operation *** - ============================== - [..] - (+) Send an amount of data in non blocking mode (DMA) using HAL_UART_Transmit_DMA() - (+) At transmission end of half transfer HAL_UART_TxHalfCpltCallback is executed and user can - add his own code by customization of function pointer HAL_UART_TxHalfCpltCallback - (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_UART_TxCpltCallback - (+) Receive an amount of data in non blocking mode (DMA) using HAL_UART_Receive_DMA() - (+) At reception end of half transfer HAL_UART_RxHalfCpltCallback is executed and user can - add his own code by customization of function pointer HAL_UART_RxHalfCpltCallback - (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can - add his own code by customization of function pointer HAL_UART_RxCpltCallback - (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can - add his own code by customization of function pointer HAL_UART_ErrorCallback - (+) Pause the DMA Transfer using HAL_UART_DMAPause() - (+) Resume the DMA Transfer using HAL_UART_DMAResume() - (+) Stop the DMA Transfer using HAL_UART_DMAStop() - - *** UART HAL driver macros list *** - ============================================= - [..] - Below the list of most used macros in UART HAL driver. - - (+) __HAL_UART_ENABLE: Enable the UART peripheral - (+) __HAL_UART_DISABLE: Disable the UART peripheral - (+) __HAL_UART_GET_FLAG : Check whether the specified UART flag is set or not - (+) __HAL_UART_CLEAR_FLAG : Clear the specified UART pending flag - (+) __HAL_UART_ENABLE_IT: Enable the specified UART interrupt - (+) __HAL_UART_DISABLE_IT: Disable the specified UART interrupt - (+) __HAL_UART_GET_IT_SOURCE: Check whether the specified UART interrupt has occurred or not - - [..] - (@) You can refer to the UART HAL driver header file for more useful macros - - @endverbatim - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup UART UART - * @brief HAL UART module driver - * @{ - */ -#ifdef HAL_UART_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/** @addtogroup UART_Private_Functions UART Private Functions - * @{ - */ -static void UART_SetConfig (UART_HandleTypeDef *huart); -static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart); -static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart); -static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart); -static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma); -static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma); -static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma); -static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma); -static void UART_DMAError(DMA_HandleTypeDef *hdma); -static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout); -/** - * @} - */ - -/* Exported functions ---------------------------------------------------------*/ - -/** @defgroup UART_Exported_Functions UART Exported Functions - * @{ - */ - -/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions - * -@verbatim -=============================================================================== - ##### Initialization and Configuration functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to initialize the USARTx or the UARTy - in asynchronous mode. - (+) For the asynchronous mode only these parameters can be configured: - (++) Baud Rate - (++) Word Length - (++) Stop Bit - (++) Parity - (++) Hardware flow control - (++) Receiver/transmitter modes - [..] - The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init() and HAL_MultiProcessor_Init() APIs - follow respectively the UART asynchronous, UART Half duplex, LIN and Multi-Processor - configuration procedures (details for the procedures are available in reference manuals - (RM0008 for STM32F10Xxx MCUs and RM0041 for STM32F100xx MCUs)). - - -@endverbatim - * @{ - */ - -/* - Additionnal remark: If the parity is enabled, then the MSB bit of the data written - in the data register is transmitted but is changed by the parity bit. - Depending on the frame length defined by the M bit (8-bits or 9-bits), - the possible UART frame formats are as listed in the following table: - +-------------------------------------------------------------+ - | M bit | PCE bit | UART frame | - |---------------------|---------------------------------------| - | 0 | 0 | | SB | 8 bit data | STB | | - |---------|-----------|---------------------------------------| - | 0 | 1 | | SB | 7 bit data | PB | STB | | - |---------|-----------|---------------------------------------| - | 1 | 0 | | SB | 9 bit data | STB | | - |---------|-----------|---------------------------------------| - | 1 | 1 | | SB | 8 bit data | PB | STB | | - +-------------------------------------------------------------+ -*/ - -/** - * @brief Initializes the UART mode according to the specified parameters in - * the UART_InitTypeDef and create the associated handle. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart) -{ - /* Check the UART handle allocation */ - if(huart == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - if(huart->Init.HwFlowCtl != UART_HWCONTROL_NONE) - { - /* The hardware flow control is available only for USART1, USART2, USART3 */ - assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance)); - assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl)); - } - else - { - assert_param(IS_UART_INSTANCE(huart->Instance)); - } - assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); - assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); - - if(huart->State == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - - /* Init the low level hardware */ - HAL_UART_MspInit(huart); - } - - huart->State = HAL_UART_STATE_BUSY; - - /* Disable the peripheral */ - __HAL_UART_DISABLE(huart); - - /* Set the UART Communication parameters */ - UART_SetConfig(huart); - - /* In asynchronous mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/ - CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); - - /* Enable the peripheral */ - __HAL_UART_ENABLE(huart); - - /* Initialize the UART state */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->State= HAL_UART_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Initializes the half-duplex mode according to the specified - * parameters in the UART_InitTypeDef and create the associated handle. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart) -{ - /* Check the UART handle allocation */ - if(huart == NULL) - { - return HAL_ERROR; - } - - /* Check UART instance */ - assert_param(IS_UART_HALFDUPLEX_INSTANCE(huart->Instance)); - assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); - assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); - - if(huart->State == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - - /* Init the low level hardware */ - HAL_UART_MspInit(huart); - } - - huart->State = HAL_UART_STATE_BUSY; - - /* Disable the peripheral */ - __HAL_UART_DISABLE(huart); - - /* Set the UART Communication parameters */ - UART_SetConfig(huart); - - /* In half-duplex mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - SCEN and IREN bits in the USART_CR3 register.*/ - CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_IREN | USART_CR3_SCEN)); - - /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ - SET_BIT(huart->Instance->CR3, USART_CR3_HDSEL); - - /* Enable the peripheral */ - __HAL_UART_ENABLE(huart); - - /* Initialize the UART state*/ - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->State= HAL_UART_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Initializes the LIN mode according to the specified - * parameters in the UART_InitTypeDef and create the associated handle. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @param BreakDetectLength: Specifies the LIN break detection length. - * This parameter can be one of the following values: - * @arg UART_LINBREAKDETECTLENGTH_10B: 10-bit break detection - * @arg UART_LINBREAKDETECTLENGTH_11B: 11-bit break detection - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength) -{ - /* Check the UART handle allocation */ - if(huart == NULL) - { - return HAL_ERROR; - } - - /* Check the LIN UART instance */ - assert_param(IS_UART_LIN_INSTANCE(huart->Instance)); - /* Check the Break detection length parameter */ - assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength)); - assert_param(IS_UART_LIN_WORD_LENGTH(huart->Init.WordLength)); - assert_param(IS_UART_LIN_OVERSAMPLING(huart->Init.OverSampling)); - - if(huart->State == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - - /* Init the low level hardware */ - HAL_UART_MspInit(huart); - } - - huart->State = HAL_UART_STATE_BUSY; - - /* Disable the peripheral */ - __HAL_UART_DISABLE(huart); - - /* Set the UART Communication parameters */ - UART_SetConfig(huart); - - /* In LIN mode, the following bits must be kept cleared: - - CLKEN bits in the USART_CR2 register, - - SCEN and IREN bits in the USART_CR3 register.*/ - CLEAR_BIT(huart->Instance->CR2, USART_CR2_CLKEN); - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN)); - - /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ - SET_BIT(huart->Instance->CR2, USART_CR2_LINEN); - - /* Set the USART LIN Break detection length. */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength); - - /* Enable the peripheral */ - __HAL_UART_ENABLE(huart); - - /* Initialize the UART state*/ - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->State= HAL_UART_STATE_READY; - - return HAL_OK; -} - -/** - * @brief Initializes the Multi-Processor mode according to the specified - * parameters in the UART_InitTypeDef and create the associated handle. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @param Address: UART node address - * @param WakeUpMethod: specifies the UART wakeup method. - * This parameter can be one of the following values: - * @arg UART_WAKEUPMETHOD_IDLELINE: Wakeup by an idle line detection - * @arg UART_WAKEUPMETHOD_ADDRESSMARK: Wakeup by an address mark - * @retval HAL status - */ -HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) -{ - /* Check the UART handle allocation */ - if(huart == NULL) - { - return HAL_ERROR; - } - - /* Check UART instance capabilities */ - assert_param(IS_UART_MULTIPROCESSOR_INSTANCE(huart->Instance)); - - /* Check the Address & wake up method parameters */ - assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod)); - assert_param(IS_UART_ADDRESS(Address)); - assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength)); - assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling)); - - if(huart->State == HAL_UART_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - huart->Lock = HAL_UNLOCKED; - - /* Init the low level hardware */ - HAL_UART_MspInit(huart); - } - - huart->State = HAL_UART_STATE_BUSY; - - /* Disable the peripheral */ - __HAL_UART_DISABLE(huart); - - /* Set the UART Communication parameters */ - UART_SetConfig(huart); - - /* In Multi-Processor mode, the following bits must be kept cleared: - - LINEN and CLKEN bits in the USART_CR2 register, - - SCEN, HDSEL and IREN bits in the USART_CR3 register */ - CLEAR_BIT(huart->Instance->CR2, (USART_CR2_LINEN | USART_CR2_CLKEN)); - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN)); - - /* Set the USART address node */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, Address); - - /* Set the wake up method by setting the WAKE bit in the CR1 register */ - MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod); - - /* Enable the peripheral */ - __HAL_UART_ENABLE(huart); - - /* Initialize the UART state */ - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->State= HAL_UART_STATE_READY; - - return HAL_OK; -} - -/** - * @brief DeInitializes the UART peripheral. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart) -{ - /* Check the UART handle allocation */ - if(huart == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_UART_INSTANCE(huart->Instance)); - - huart->State = HAL_UART_STATE_BUSY; - - /* Disable the Peripheral */ - __HAL_UART_DISABLE(huart); - - huart->Instance->CR1 = 0x0; - huart->Instance->CR2 = 0x0; - huart->Instance->CR3 = 0x0; - - /* DeInit the low level hardware */ - HAL_UART_MspDeInit(huart); - - huart->ErrorCode = HAL_UART_ERROR_NONE; - huart->State = HAL_UART_STATE_RESET; - - /* Process Unlock */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief UART MSP Init. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval None - */ - __weak void HAL_UART_MspInit(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_UART_MspInit can be implemented in the user file - */ -} - -/** - * @brief UART MSP DeInit. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval None - */ - __weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_UART_MspDeInit can be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup UART_Exported_Functions_Group2 IO operation functions - * @brief UART Transmit and Receive functions - * -@verbatim - ============================================================================== - ##### IO operation functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to manage the UART asynchronous - and Half duplex data transfers. - - (#) There are two modes of transfer: - (++) Blocking mode: The communication is performed in polling mode. - The HAL status of all data processing is returned by the same function - after finishing transfer. - (++) Non blocking mode: The communication is performed using Interrupts - or DMA, these APIs return the HAL status. - The end of the data processing will be indicated through the - dedicated UART IRQ when using Interrupt mode or the DMA IRQ when - using DMA mode. - The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks - will be executed respectively at the end of the transmit or receive process. - The HAL_UART_ErrorCallback() user callback will be executed when - a communication error is detected. - - (#) Blocking mode APIs are: - (++) HAL_UART_Transmit() - (++) HAL_UART_Receive() - - (#) Non Blocking mode APIs with Interrupt are: - (++) HAL_UART_Transmit_IT() - (++) HAL_UART_Receive_IT() - (++) HAL_UART_IRQHandler() - - (#) Non Blocking mode functions with DMA are: - (++) HAL_UART_Transmit_DMA() - (++) HAL_UART_Receive_DMA() - (++) HAL_UART_DMAPause() - (++) HAL_UART_DMAResume() - (++) HAL_UART_DMAStop() - - (#) A set of Transfer Complete Callbacks are provided in non blocking mode: - (++) HAL_UART_TxHalfCpltCallback() - (++) HAL_UART_TxCpltCallback() - (++) HAL_UART_RxHalfCpltCallback() - (++) HAL_UART_RxCpltCallback() - (++) HAL_UART_ErrorCallback() - - [..] - (@) In the Half duplex communication, it is forbidden to run the transmit - and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX - can't be useful. - -@endverbatim - * @{ - */ - -/** - * @brief Sends an amount of data in blocking mode. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint16_t* tmp; - uint32_t tmp_state = 0; - - tmp_state = huart->State; - if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_RX)) - { - if((pData == NULL) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->ErrorCode = HAL_UART_ERROR_NONE; - /* Check if a non-blocking receive process is ongoing or not */ - if(huart->State == HAL_UART_STATE_BUSY_RX) - { - huart->State = HAL_UART_STATE_BUSY_TX_RX; - } - else - { - huart->State = HAL_UART_STATE_BUSY_TX; - } - - huart->TxXferSize = Size; - huart->TxXferCount = Size; - while(huart->TxXferCount > 0) - { - huart->TxXferCount--; - if(huart->Init.WordLength == UART_WORDLENGTH_9B) - { - if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - tmp = (uint16_t*) pData; - huart->Instance->DR = (*tmp & (uint16_t)0x01FF); - if(huart->Init.Parity == UART_PARITY_NONE) - { - pData +=2; - } - else - { - pData +=1; - } - } - else - { - if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - huart->Instance->DR = (*pData++ & (uint8_t)0xFF); - } - } - - if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - - /* Check if a non-blocking receive process is ongoing or not */ - if(huart->State == HAL_UART_STATE_BUSY_TX_RX) - { - huart->State = HAL_UART_STATE_BUSY_RX; - } - else - { - huart->State = HAL_UART_STATE_READY; - } - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receives an amount of data in blocking mode. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be received - * @param Timeout: Timeout duration - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) -{ - uint16_t* tmp; - uint32_t tmp_state = 0; - - tmp_state = huart->State; - if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_TX)) - { - if((pData == NULL ) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->ErrorCode = HAL_UART_ERROR_NONE; - /* Check if a non-blocking transmit process is ongoing or not */ - if(huart->State == HAL_UART_STATE_BUSY_TX) - { - huart->State = HAL_UART_STATE_BUSY_TX_RX; - } - else - { - huart->State = HAL_UART_STATE_BUSY_RX; - } - - huart->RxXferSize = Size; - huart->RxXferCount = Size; - - /* Check the remain data to be received */ - while(huart->RxXferCount > 0) - { - huart->RxXferCount--; - if(huart->Init.WordLength == UART_WORDLENGTH_9B) - { - if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - tmp = (uint16_t*) pData ; - if(huart->Init.Parity == UART_PARITY_NONE) - { - *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF); - pData +=2; - } - else - { - *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FF); - pData +=1; - } - - } - else - { - if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, Timeout) != HAL_OK) - { - return HAL_TIMEOUT; - } - if(huart->Init.Parity == UART_PARITY_NONE) - { - *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF); - } - else - { - *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F); - } - - } - } - - /* Check if a non-blocking transmit process is ongoing or not */ - if(huart->State == HAL_UART_STATE_BUSY_TX_RX) - { - huart->State = HAL_UART_STATE_BUSY_TX; - } - else - { - huart->State = HAL_UART_STATE_READY; - } - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sends an amount of data in non blocking mode. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - uint32_t tmp_state = 0; - - tmp_state = huart->State; - if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_RX)) - { - if((pData == NULL ) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->pTxBuffPtr = pData; - huart->TxXferSize = Size; - huart->TxXferCount = Size; - - huart->ErrorCode = HAL_UART_ERROR_NONE; - /* Check if a receive process is ongoing or not */ - if(huart->State == HAL_UART_STATE_BUSY_RX) - { - huart->State = HAL_UART_STATE_BUSY_TX_RX; - } - else - { - huart->State = HAL_UART_STATE_BUSY_TX; - } - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - /* Enable the UART Transmit data register empty Interrupt */ - __HAL_UART_ENABLE_IT(huart, UART_IT_TXE); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receives an amount of data in non blocking mode - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be received - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - uint32_t tmp_state = 0; - - tmp_state = huart->State; - if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_TX)) - { - if((pData == NULL ) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->pRxBuffPtr = pData; - huart->RxXferSize = Size; - huart->RxXferCount = Size; - - huart->ErrorCode = HAL_UART_ERROR_NONE; - /* Check if a transmit process is ongoing or not */ - if(huart->State == HAL_UART_STATE_BUSY_TX) - { - huart->State = HAL_UART_STATE_BUSY_TX_RX; - } - else - { - huart->State = HAL_UART_STATE_BUSY_RX; - } - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - /* Enable the UART Parity Error Interrupt */ - __HAL_UART_ENABLE_IT(huart, UART_IT_PE); - - /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - __HAL_UART_ENABLE_IT(huart, UART_IT_ERR); - - /* Enable the UART Data Register not empty Interrupt */ - __HAL_UART_ENABLE_IT(huart, UART_IT_RXNE); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Sends an amount of data in non blocking mode. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be sent - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - uint32_t *tmp; - uint32_t tmp_state = 0; - - tmp_state = huart->State; - if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_RX)) - { - if((pData == NULL ) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->pTxBuffPtr = pData; - huart->TxXferSize = Size; - huart->TxXferCount = Size; - - huart->ErrorCode = HAL_UART_ERROR_NONE; - /* Check if a receive process is ongoing or not */ - if(huart->State == HAL_UART_STATE_BUSY_RX) - { - huart->State = HAL_UART_STATE_BUSY_TX_RX; - } - else - { - huart->State = HAL_UART_STATE_BUSY_TX; - } - - /* Set the UART DMA transfer complete callback */ - huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt; - - /* Set the UART DMA Half transfer complete callback */ - huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt; - - /* Set the DMA error callback */ - huart->hdmatx->XferErrorCallback = UART_DMAError; - - /* Enable the UART transmit DMA channel */ - tmp = (uint32_t*)&pData; - HAL_DMA_Start_IT(huart->hdmatx, *(uint32_t*)tmp, (uint32_t)&huart->Instance->DR, Size); - - /* Clear the TC flag in the SR register by writing 0 to it */ - __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC); - - /* Enable the DMA transfer for transmit request by setting the DMAT bit - in the UART CR3 register */ - SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Receives an amount of data in non blocking mode. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @param pData: Pointer to data buffer - * @param Size: Amount of data to be received - * @note When the UART parity is enabled (PCE = 1), the received data contain - * the parity bit (MSB position) - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) -{ - uint32_t *tmp; - uint32_t tmp_state = 0; - - tmp_state = huart->State; - if((tmp_state == HAL_UART_STATE_READY) || (tmp_state == HAL_UART_STATE_BUSY_TX)) - { - if((pData == NULL ) || (Size == 0)) - { - return HAL_ERROR; - } - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->pRxBuffPtr = pData; - huart->RxXferSize = Size; - - huart->ErrorCode = HAL_UART_ERROR_NONE; - /* Check if a transmit process is ongoing or not */ - if(huart->State == HAL_UART_STATE_BUSY_TX) - { - huart->State = HAL_UART_STATE_BUSY_TX_RX; - } - else - { - huart->State = HAL_UART_STATE_BUSY_RX; - } - - /* Set the UART DMA transfer complete callback */ - huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt; - - /* Set the UART DMA Half transfer complete callback */ - huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt; - - /* Set the DMA error callback */ - huart->hdmarx->XferErrorCallback = UART_DMAError; - - /* Enable the DMA channel */ - tmp = (uint32_t*)&pData; - HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->DR, *(uint32_t*)tmp, Size); - - /* Enable the DMA transfer for the receiver request by setting the DMAR bit - in the UART CR3 register */ - SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Pauses the DMA Transfer. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart) -{ - /* Process Locked */ - __HAL_LOCK(huart); - - if(huart->State == HAL_UART_STATE_BUSY_TX) - { - /* Disable the UART DMA Tx request */ - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - } - else if(huart->State == HAL_UART_STATE_BUSY_RX) - { - /* Disable the UART DMA Rx request */ - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - } - else if (huart->State == HAL_UART_STATE_BUSY_TX_RX) - { - /* Disable the UART DMA Tx & Rx requests */ - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_DMAT | USART_CR3_DMAR)); - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_ERROR; - } - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Resumes the DMA Transfer. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart) -{ - /* Process Locked */ - __HAL_LOCK(huart); - - if(huart->State == HAL_UART_STATE_BUSY_TX) - { - /* Enable the UART DMA Tx request */ - SET_BIT(huart->Instance->CR3, USART_CR3_DMAT); - } - else if(huart->State == HAL_UART_STATE_BUSY_RX) - { - /* Clear the Overrun flag before resumming the Rx transfer*/ - __HAL_UART_CLEAR_OREFLAG(huart); - /* Enable the UART DMA Rx request */ - SET_BIT(huart->Instance->CR3, USART_CR3_DMAR); - } - else if(huart->State == HAL_UART_STATE_BUSY_TX_RX) - { - /* Clear the Overrun flag before resumming the Rx transfer*/ - __HAL_UART_CLEAR_OREFLAG(huart); - /* Enable the UART DMA Tx & Rx request */ - SET_BIT(huart->Instance->CR3, (USART_CR3_DMAT | USART_CR3_DMAR)); - } - else - { - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_ERROR; - } - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Stops the DMA Transfer. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart) -{ - /* The Lock is not implemented on this API to allow the user application - to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback(): - when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated - and the correspond call back is executed HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() - */ - - /* Disable the UART Tx/Rx DMA requests */ - CLEAR_BIT(huart->Instance->CR3, (USART_CR3_DMAT | USART_CR3_DMAR)); - - /* Abort the UART DMA tx channel */ - if(huart->hdmatx != NULL) - { - HAL_DMA_Abort(huart->hdmatx); - } - /* Abort the UART DMA rx channel */ - if(huart->hdmarx != NULL) - { - HAL_DMA_Abort(huart->hdmarx); - } - - huart->State = HAL_UART_STATE_READY; - - return HAL_OK; -} - -/** - * @brief This function handles UART interrupt request. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval None - */ -void HAL_UART_IRQHandler(UART_HandleTypeDef *huart) -{ - uint32_t tmp_flag = 0, tmp_it_source = 0; - - tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_PE); - tmp_it_source = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_PE); - /* UART parity error interrupt occurred ------------------------------------*/ - if((tmp_flag != RESET) && (tmp_it_source != RESET)) - { - huart->ErrorCode |= HAL_UART_ERROR_PE; - } - - tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_FE); - tmp_it_source = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR); - /* UART frame error interrupt occurred -------------------------------------*/ - if((tmp_flag != RESET) && (tmp_it_source != RESET)) - { - huart->ErrorCode |= HAL_UART_ERROR_FE; - } - - tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_NE); - /* UART noise error interrupt occurred -------------------------------------*/ - if((tmp_flag != RESET) && (tmp_it_source != RESET)) - { - huart->ErrorCode |= HAL_UART_ERROR_NE; - } - - tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_ORE); - /* UART Over-Run interrupt occurred ----------------------------------------*/ - if((tmp_flag != RESET) && (tmp_it_source != RESET)) - { - huart->ErrorCode |= HAL_UART_ERROR_ORE; - } - - tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE); - tmp_it_source = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_RXNE); - /* UART in mode Receiver ---------------------------------------------------*/ - if((tmp_flag != RESET) && (tmp_it_source != RESET)) - { - UART_Receive_IT(huart); - } - - tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_TXE); - tmp_it_source = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_TXE); - /* UART in mode Transmitter ------------------------------------------------*/ - if((tmp_flag != RESET) && (tmp_it_source != RESET)) - { - UART_Transmit_IT(huart); - } - - tmp_flag = __HAL_UART_GET_FLAG(huart, UART_FLAG_TC); - tmp_it_source = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_TC); - /* UART in mode Transmitter end --------------------------------------------*/ - if((tmp_flag != RESET) && (tmp_it_source != RESET)) - { - UART_EndTransmit_IT(huart); - } - - if(huart->ErrorCode != HAL_UART_ERROR_NONE) - { - /* Clear all the error flag at once */ - __HAL_UART_CLEAR_PEFLAG(huart); - - /* Set the UART state ready to be able to start again the process */ - huart->State = HAL_UART_STATE_READY; - - HAL_UART_ErrorCallback(huart); - } -} - -/** - * @brief Tx Transfer completed callbacks. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval None - */ - __weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_UART_TxCpltCallback can be implemented in the user file - */ -} - -/** - * @brief Tx Half Transfer completed callbacks. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval None - */ - __weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_UART_TxHalfCpltCallback can be implemented in the user file - */ -} - -/** - * @brief Rx Transfer completed callbacks. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval None - */ -__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_UART_RxCpltCallback can be implemented in the user file - */ -} - -/** - * @brief Rx Half Transfer completed callbacks. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval None - */ -__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_UART_RxHalfCpltCallback can be implemented in the user file - */ -} - -/** - * @brief UART error callbacks. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval None - */ - __weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(huart); - /* NOTE: This function should not be modified, when the callback is needed, - the HAL_UART_ErrorCallback can be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions - * @brief UART control functions - * -@verbatim - ============================================================================== - ##### Peripheral Control functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to control the UART: - (+) HAL_LIN_SendBreak() API can be helpful to transmit the break character. - (+) HAL_MultiProcessor_EnterMuteMode() API can be helpful to enter the UART in mute mode. - (+) HAL_MultiProcessor_ExitMuteMode() API can be helpful to exit the UART mute mode by software. - (+) HAL_HalfDuplex_EnableTransmitter() API to enable the UART transmitter and disables the UART receiver in Half Duplex mode - (+) HAL_HalfDuplex_EnableReceiver() API to enable the UART receiver and disables the UART transmitter in Half Duplex mode - -@endverbatim - * @{ - */ - -/** - * @brief Transmits break characters. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart) -{ - /* Check the parameters */ - assert_param(IS_UART_INSTANCE(huart->Instance)); - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->State = HAL_UART_STATE_BUSY; - - /* Send break characters */ - SET_BIT(huart->Instance->CR1, USART_CR1_SBK); - - huart->State = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Enters the UART in mute mode. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart) -{ - /* Check the parameters */ - assert_param(IS_UART_INSTANCE(huart->Instance)); - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->State = HAL_UART_STATE_BUSY; - - /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ - SET_BIT(huart->Instance->CR1, USART_CR1_RWU); - - huart->State = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Exits the UART mute mode: wake up software. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart) -{ - /* Check the parameters */ - assert_param(IS_UART_INSTANCE(huart->Instance)); - - /* Process Locked */ - __HAL_LOCK(huart); - - huart->State = HAL_UART_STATE_BUSY; - - /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ - CLEAR_BIT(huart->Instance->CR1, USART_CR1_RWU); - - huart->State = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Enables the UART transmitter and disables the UART receiver. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart) -{ - /* Process Locked */ - __HAL_LOCK(huart); - - huart->State = HAL_UART_STATE_BUSY; - - /*-------------------------- USART CR1 Configuration -----------------------*/ - /* Clear TE and RE bits */ - /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */ - MODIFY_REG(huart->Instance->CR1, (uint32_t)(USART_CR1_TE | USART_CR1_RE), USART_CR1_TE); - - huart->State = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @brief Enables the UART receiver and disables the UART transmitter. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart) -{ - /* Process Locked */ - __HAL_LOCK(huart); - - huart->State = HAL_UART_STATE_BUSY; - - /*-------------------------- USART CR1 Configuration -----------------------*/ - /* Clear TE and RE bits */ - /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */ - MODIFY_REG(huart->Instance->CR1, (uint32_t)(USART_CR1_TE | USART_CR1_RE), USART_CR1_RE); - - huart->State = HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Errors functions - * @brief UART State and Errors functions - * -@verbatim - ============================================================================== - ##### Peripheral State and Errors functions ##### - ============================================================================== - [..] - This subsection provides a set of functions allowing to return the State of - UART communication process, return Peripheral Errors occurred during communication - process - (+) HAL_UART_GetState() API can be helpful to check in run-time the state of the UART peripheral. - (+) HAL_UART_GetError() check in run-time errors that could be occurred during communication. - -@endverbatim - * @{ - */ - -/** - * @brief Returns the UART state. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL state - */ -HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart) -{ - return huart->State; -} - -/** -* @brief Return the UART error code -* @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART. -* @retval UART Error Code -*/ -uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart) -{ - return huart->ErrorCode; -} - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup UART_Private_Functions UART Private Functions - * @brief UART Private functions - * @{ - */ -/** - * @brief DMA UART transmit process complete callback. - * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - /* DMA Normal mode*/ - if ( HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC) ) - { - huart->TxXferCount = 0; - - /* Disable the DMA transfer for transmit request by setting the DMAT bit - in the UART CR3 register */ - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAT); - - /* Enable the UART Transmit Complete Interrupt */ - __HAL_UART_ENABLE_IT(huart, UART_IT_TC); - } - /* DMA Circular mode */ - else - { - HAL_UART_TxCpltCallback(huart); - } -} - -/** - * @brief DMA UART transmit process half complete callback - * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; - - HAL_UART_TxHalfCpltCallback(huart); -} - -/** - * @brief DMA UART receive process complete callback. - * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - /* DMA Normal mode*/ - if ( HAL_IS_BIT_CLR(hdma->Instance->CCR, DMA_CCR_CIRC) ) - { - huart->RxXferCount = 0; - - /* Disable the DMA transfer for the receiver request by setting the DMAR bit - in the UART CR3 register */ - CLEAR_BIT(huart->Instance->CR3, USART_CR3_DMAR); - - /* Check if a transmit process is ongoing or not */ - if(huart->State == HAL_UART_STATE_BUSY_TX_RX) - { - huart->State = HAL_UART_STATE_BUSY_TX; - } - else - { - huart->State = HAL_UART_STATE_READY; - } - } - HAL_UART_RxCpltCallback(huart); -} - -/** - * @brief DMA UART receive process half complete callback - * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent; - - HAL_UART_RxHalfCpltCallback(huart); -} - -/** - * @brief DMA UART communication error callback. - * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains - * the configuration information for the specified DMA module. - * @retval None - */ -static void UART_DMAError(DMA_HandleTypeDef *hdma) -{ - UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; - huart->RxXferCount = 0; - huart->TxXferCount = 0; - huart->State= HAL_UART_STATE_READY; - huart->ErrorCode |= HAL_UART_ERROR_DMA; - HAL_UART_ErrorCallback(huart); -} - -/** - * @brief This function handles UART Communication Timeout. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @param Flag: specifies the UART flag to check. - * @param Status: The new Flag status (SET or RESET). - * @param Timeout: Timeout duration - * @retval HAL status - */ -static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout) -{ - uint32_t tickstart = 0; - - /* Get tick */ - tickstart = HAL_GetTick(); - - /* Wait until flag is set */ - if(Status == RESET) - { - while(__HAL_UART_GET_FLAG(huart, Flag) == RESET) - { - /* Check for the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) - { - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ - __HAL_UART_DISABLE_IT(huart, UART_IT_TXE); - __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE); - __HAL_UART_DISABLE_IT(huart, UART_IT_PE); - __HAL_UART_DISABLE_IT(huart, UART_IT_ERR); - - huart->State= HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_TIMEOUT; - } - } - } - } - else - { - while(__HAL_UART_GET_FLAG(huart, Flag) != RESET) - { - /* Check for the Timeout */ - if(Timeout != HAL_MAX_DELAY) - { - if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) - { - /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */ - __HAL_UART_DISABLE_IT(huart, UART_IT_TXE); - __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE); - __HAL_UART_DISABLE_IT(huart, UART_IT_PE); - __HAL_UART_DISABLE_IT(huart, UART_IT_ERR); - - huart->State= HAL_UART_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(huart); - - return HAL_TIMEOUT; - } - } - } - } - return HAL_OK; -} - -/** - * @brief Sends an amount of data in non blocking mode. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart) -{ - uint16_t* tmp; - uint32_t tmp_state = 0; - - tmp_state = huart->State; - if((tmp_state == HAL_UART_STATE_BUSY_TX) || (tmp_state == HAL_UART_STATE_BUSY_TX_RX)) - { - if(huart->Init.WordLength == UART_WORDLENGTH_9B) - { - tmp = (uint16_t*) huart->pTxBuffPtr; - huart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF); - if(huart->Init.Parity == UART_PARITY_NONE) - { - huart->pTxBuffPtr += 2; - } - else - { - huart->pTxBuffPtr += 1; - } - } - else - { - huart->Instance->DR = (uint8_t)(*huart->pTxBuffPtr++ & (uint8_t)0x00FF); - } - - if(--huart->TxXferCount == 0) - { - /* Disable the UART Transmit Complete Interrupt */ - __HAL_UART_DISABLE_IT(huart, UART_IT_TXE); - - /* Enable the UART Transmit Complete Interrupt */ - __HAL_UART_ENABLE_IT(huart, UART_IT_TC); - } - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - - -/** - * @brief Wraps up transmission in non blocking mode. - * @param huart: pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart) -{ - /* Disable the UART Transmit Complete Interrupt */ - __HAL_UART_DISABLE_IT(huart, UART_IT_TC); - - /* Check if a receive process is ongoing or not */ - if(huart->State == HAL_UART_STATE_BUSY_TX_RX) - { - huart->State = HAL_UART_STATE_BUSY_RX; - } - else - { - huart->State = HAL_UART_STATE_READY; - } - - HAL_UART_TxCpltCallback(huart); - - return HAL_OK; -} - -/** - * @brief Receives an amount of data in non blocking mode - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval HAL status - */ -static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart) -{ - uint16_t* tmp; - uint32_t tmp_state = 0; - - tmp_state = huart->State; - if((tmp_state == HAL_UART_STATE_BUSY_RX) || (tmp_state == HAL_UART_STATE_BUSY_TX_RX)) - { - if(huart->Init.WordLength == UART_WORDLENGTH_9B) - { - tmp = (uint16_t*) huart->pRxBuffPtr; - if(huart->Init.Parity == UART_PARITY_NONE) - { - *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF); - huart->pRxBuffPtr += 2; - } - else - { - *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FF); - huart->pRxBuffPtr += 1; - } - } - else - { - if(huart->Init.Parity == UART_PARITY_NONE) - { - *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF); - } - else - { - *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F); - } - } - - if(--huart->RxXferCount == 0) - { - __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE); - - /* Check if a transmit process is ongoing or not */ - if(huart->State == HAL_UART_STATE_BUSY_TX_RX) - { - huart->State = HAL_UART_STATE_BUSY_TX; - } - else - { - /* Disable the UART Parity Error Interrupt */ - __HAL_UART_DISABLE_IT(huart, UART_IT_PE); - - /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */ - __HAL_UART_DISABLE_IT(huart, UART_IT_ERR); - - huart->State = HAL_UART_STATE_READY; - } - HAL_UART_RxCpltCallback(huart); - - return HAL_OK; - } - return HAL_OK; - } - else - { - return HAL_BUSY; - } -} - -/** - * @brief Configures the UART peripheral. - * @param huart: Pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval None - */ -static void UART_SetConfig(UART_HandleTypeDef *huart) -{ - uint32_t tmpreg = 0x00; - - /* Check the parameters */ - assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate)); - assert_param(IS_UART_STOPBITS(huart->Init.StopBits)); - assert_param(IS_UART_PARITY(huart->Init.Parity)); - assert_param(IS_UART_MODE(huart->Init.Mode)); - - /*------- UART-associated USART registers setting : CR2 Configuration ------*/ - /* Configure the UART Stop Bits: Set STOP[13:12] bits according - * to huart->Init.StopBits value */ - MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits); - - /*------- UART-associated USART registers setting : CR1 Configuration ------*/ - /* Configure the UART Word Length, Parity and mode: - Set the M bits according to huart->Init.WordLength value - Set PCE and PS bits according to huart->Init.Parity value - Set TE and RE bits according to huart->Init.Mode value */ - tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode ; - MODIFY_REG(huart->Instance->CR1, - (uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE), - tmpreg); - - /*------- UART-associated USART registers setting : CR3 Configuration ------*/ - /* Configure the UART HFC: Set CTSE and RTSE bits according to huart->Init.HwFlowCtl value */ - MODIFY_REG(huart->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE), huart->Init.HwFlowCtl); - - /*------- UART-associated USART registers setting : BRR Configuration ------*/ - if((huart->Instance == USART1)) - { - huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate); - } - else - { - huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate); - } -} -/** - * @} - */ - -#endif /* HAL_UART_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c deleted file mode 100644 index 1b673cd..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c +++ /dev/null @@ -1,2211 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_ll_usb.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief USB Low Layer HAL module driver. - * - * This file provides firmware functions to manage the following - * functionalities of the USB Peripheral Controller: - * + Initialization/de-initialization functions - * + I/O operation functions - * + Peripheral Control functions - * + Peripheral State functions - * - @verbatim - ============================================================================== - ##### How to use this driver ##### - ============================================================================== - [..] - (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure. - - (#) Call USB_CoreInit() API to initialize the USB Core peripheral. - - (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes. - - @endverbatim - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup USB_LL USB Low Layer - * @brief Low layer module for USB_FS and USB_OTG_FS drivers - * @{ - */ - -#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) - -#if defined(STM32F102x6) || defined(STM32F102xB) || \ - defined(STM32F103x6) || defined(STM32F103xB) || \ - defined(STM32F103xE) || defined(STM32F103xG) || \ - defined(STM32F105xC) || defined(STM32F107xC) - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -#if defined (USB_OTG_FS) -/** @defgroup USB_LL_Private_Functions USB Low Layer Private Functions - * @{ - */ -static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx); -/** - * @} - */ -#endif /* USB_OTG_FS */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup USB_LL_Exported_Functions USB Low Layer Exported Functions - * @{ - */ - -/** @defgroup USB_LL_Exported_Functions_Group1 Peripheral Control functions - * @brief management functions - * -@verbatim - =============================================================================== - ##### Peripheral Control functions ##### - =============================================================================== - [..] - This subsection provides a set of functions allowing to control the PCD data - transfers. - -@endverbatim - * @{ - */ - -/*============================================================================== - USB OTG FS peripheral available on STM32F105xx and STM32F107xx devices -==============================================================================*/ -#if defined (USB_OTG_FS) - -/** - * @brief Initializes the USB Core - * @param USBx: USB Instance - * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains - * the configuration information for the specified USBx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) -{ - /* Select FS Embedded PHY */ - USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL; - - /* Reset after a PHY select and set Host mode */ - USB_CoreReset(USBx); - - /* Deactivate the power down*/ - USBx->GCCFG = USB_OTG_GCCFG_PWRDWN; - - return HAL_OK; -} - -/** - * @brief USB_EnableGlobalInt - * Enables the controller's Global Int in the AHB Config reg - * @param USBx : Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx) -{ - USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT; - return HAL_OK; -} - -/** - * @brief USB_DisableGlobalInt - * Disable the controller's Global Int in the AHB Config reg - * @param USBx : Selected device - * @retval HAL status -*/ -HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx) -{ - USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT; - return HAL_OK; -} - -/** - * @brief USB_SetCurrentMode : Set functional mode - * @param USBx : Selected device - * @param mode : current core mode - * This parameter can be one of the these values: - * @arg USB_DEVICE_MODE: Peripheral mode mode - * @arg USB_HOST_MODE: Host mode - * @arg USB_DRD_MODE: Dual Role Device mode - * @retval HAL status - */ -HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_ModeTypeDef mode) -{ - USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD); - - if ( mode == USB_HOST_MODE) - { - USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD; - } - else if ( mode == USB_DEVICE_MODE) - { - USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; - } - HAL_Delay(50); - - return HAL_OK; -} - -/** - * @brief USB_DevInit : Initializes the USB_OTG controller registers - * for device mode - * @param USBx : Selected device - * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains - * the configuration information for the specified USBx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef USB_DevInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) -{ - uint32_t index = 0; - - for (index = 0; index < 15 ; index++) - { - USBx->DIEPTXF[index] = 0; - } - - /*Activate VBUS Sensing B */ - USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; - - /* Restart the Phy Clock */ - USBx_PCGCCTL = 0; - - /* Device mode configuration */ - USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80; - - /* Set Full speed phy */ - USB_SetDevSpeed (USBx , USB_OTG_SPEED_FULL); - - /* Flush the FIFOs */ - USB_FlushTxFifo(USBx , 0x10); /* all Tx FIFOs */ - USB_FlushRxFifo(USBx); - - /* Clear all pending Device Interrupts */ - USBx_DEVICE->DIEPMSK = 0; - USBx_DEVICE->DOEPMSK = 0; - USBx_DEVICE->DAINT = 0xFFFFFFFF; - USBx_DEVICE->DAINTMSK = 0; - - for (index = 0; index < cfg.dev_endpoints; index++) - { - if ((USBx_INEP(index)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) - { - USBx_INEP(index)->DIEPCTL = (USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK); - } - else - { - USBx_INEP(index)->DIEPCTL = 0; - } - - USBx_INEP(index)->DIEPTSIZ = 0; - USBx_INEP(index)->DIEPINT = 0xFF; - } - - for (index = 0; index < cfg.dev_endpoints; index++) - { - if ((USBx_OUTEP(index)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) - { - USBx_OUTEP(index)->DOEPCTL = (USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK); - } - else - { - USBx_OUTEP(index)->DOEPCTL = 0; - } - - USBx_OUTEP(index)->DOEPTSIZ = 0; - USBx_OUTEP(index)->DOEPINT = 0xFF; - } - - USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM); - - /* Disable all interrupts. */ - USBx->GINTMSK = 0; - - /* Clear any pending interrupts */ - USBx->GINTSTS = 0xBFFFFFFF; - - /* Enable the common interrupts */ - USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; - - /* Enable interrupts matching to the Device mode ONLY */ - USBx->GINTMSK |= (USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST |\ - USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT |\ - USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IISOIXFRM|\ - USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM); - - if(cfg.Sof_enable) - { - USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM; - } - - if (cfg.vbus_sensing_enable == ENABLE) - { - USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT); - } - - return HAL_OK; -} - -/** - * @brief USB_OTG_FlushTxFifo : Flush a Tx FIFO - * @param USBx : Selected device - * @param num : FIFO number - * This parameter can be a value from 1 to 15 - 15 means Flush all Tx FIFOs - * @retval HAL status - */ -HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num ) -{ - uint32_t count = 0; - - USBx->GRSTCTL = ( USB_OTG_GRSTCTL_TXFFLSH |(uint32_t)( num << 6)); - - do - { - if (++count > 200000) - { - return HAL_TIMEOUT; - } - } - while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH); - - return HAL_OK; -} - -/** - * @brief USB_FlushRxFifo : Flush Rx FIFO - * @param USBx : Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t count = 0; - - USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH; - - do - { - if (++count > 200000) - { - return HAL_TIMEOUT; - } - } - while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH); - - return HAL_OK; -} - -/** - * @brief USB_SetDevSpeed :Initializes the DevSpd field of DCFG register - * depending the PHY type and the enumeration speed of the device. - * @param USBx : Selected device - * @param speed : device speed - * This parameter can be one of the these values: - * @arg USB_OTG_SPEED_FULL: Full speed mode - * @arg USB_OTG_SPEED_LOW: Low speed mode - * @retval Hal status - */ -HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed) -{ - USBx_DEVICE->DCFG |= speed; - return HAL_OK; -} - -/** - * @brief USB_GetDevSpeed :Return the Dev Speed - * @param USBx : Selected device - * @retval speed : device speed - * This parameter can be one of the these values: - * @arg USB_OTG_SPEED_FULL: Full speed mode - * @arg USB_OTG_SPEED_LOW: Low speed mode - */ -uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx) -{ - uint8_t speed = 0; - - if (((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ)|| - ((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_48MHZ)) - { - speed = USB_OTG_SPEED_FULL; - } - else if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ) - { - speed = USB_OTG_SPEED_LOW; - } - - return speed; -} - -/** - * @brief Activate and configure an endpoint - * @param USBx : Selected device - * @param ep: pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - if (ep->is_in) - { - /* Assign a Tx FIFO */ - ep->tx_fifo_num = ep->num; - } - /* Set initial data PID. */ - if (ep->type == EP_TYPE_BULK ) - { - ep->data_pid_start = 0; - } - - if (ep->is_in == 1) - { - USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))); - - if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0) - { - USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18 ) |\ - ((ep->num) << 22 ) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP)); - } - } - else - { - USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16); - - if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0) - { - USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18 ) |\ - (USB_OTG_DIEPCTL_SD0PID_SEVNFRM)| (USB_OTG_DOEPCTL_USBAEP)); - } - } - - return HAL_OK; -} - -/** - * @brief De-activate and de-initialize an endpoint - * @param USBx : Selected device - * @param ep: pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - /* Read DEPCTLn register */ - if (ep->is_in == 1) - { - USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num)))); - USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num)))); - USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP; - } - else - { - USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16)); - USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16)); - USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP; - } - return HAL_OK; -} - -/** - * @brief USB_EPStartXfer : setup and starts a transfer over an EP - * @param USBx : Selected device - * @param ep: pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep) -{ - uint16_t pktcnt = 0; - - /* IN endpoint */ - if (ep->is_in == 1) - { - /* Zero Length Packet? */ - if (ep->xfer_len == 0) - { - USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); - USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)) ; - USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); - } - else - { - /* Program the transfer size and packet count - * as follows: xfersize = N * maxpacket + - * short_packet pktcnt = N + (short_packet - * exist ? 1 : 0) - */ - USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); - USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); - USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (((ep->xfer_len + ep->maxpacket -1)/ ep->maxpacket) << 19)) ; - USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); - - if (ep->type == EP_TYPE_ISOC) - { - USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT); - USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1 << 29)); - } - } - - if (ep->type != EP_TYPE_ISOC) - { - /* Enable the Tx FIFO Empty Interrupt for this EP */ - if (ep->xfer_len > 0) - { - USBx_DEVICE->DIEPEMPMSK |= 1 << ep->num; - } - } - - if (ep->type == EP_TYPE_ISOC) - { - if ((USBx_DEVICE->DSTS & ( 1 << 8 )) == 0) - { - USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; - } - else - { - USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; - } - } - - /* EP enable, IN data in FIFO */ - USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); - - if (ep->type == EP_TYPE_ISOC) - { - USB_WritePacket(USBx, ep->xfer_buff, ep->num, ep->xfer_len); - } - } - else /* OUT endpoint */ - { - /* Program the transfer size and packet count as follows: - * pktcnt = N - * xfersize = N * maxpacket - */ - USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); - USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); - - if (ep->xfer_len == 0) - { - USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket); - USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19)); - } - else - { - pktcnt = (ep->xfer_len + ep->maxpacket -1)/ ep->maxpacket; - USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (pktcnt << 19)); - USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket * pktcnt)); - } - - if (ep->type == EP_TYPE_ISOC) - { - if ((USBx_DEVICE->DSTS & ( 1 << 8 )) == 0) - { - USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM; - } - else - { - USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; - } - } - /* EP enable */ - USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); - } - - return HAL_OK; -} - -/** - * @brief USB_EP0StartXfer : setup and starts a transfer over the EP 0 - * @param USBx : Selected device - * @param ep: pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep) -{ - /* IN endpoint */ - if (ep->is_in == 1) - { - /* Zero Length Packet? */ - if (ep->xfer_len == 0) - { - USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); - USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)); - USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); - } - else - { - /* Program the transfer size and packet count - * as follows: xfersize = N * maxpacket + - * short_packet pktcnt = N + (short_packet - * exist ? 1 : 0) - */ - USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); - USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); - - if(ep->xfer_len > ep->maxpacket) - { - ep->xfer_len = ep->maxpacket; - } - USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)); - USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); - } - - /* Enable the Tx FIFO Empty Interrupt for this EP */ - if (ep->xfer_len > 0) - { - USBx_DEVICE->DIEPEMPMSK |= 1 << (ep->num); - } - - /* EP enable, IN data in FIFO */ - USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); - } - else /* OUT endpoint */ - { - /* Program the transfer size and packet count as follows: - * pktcnt = N - * xfersize = N * maxpacket - */ - USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); - USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); - - if (ep->xfer_len > 0) - { - ep->xfer_len = ep->maxpacket; - } - - USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19)); - USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket)); - - /* EP enable */ - USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); - } - - return HAL_OK; -} - -/** - * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated - * with the EP/channel - * @param USBx : Selected device - * @param src : pointer to source buffer - * @param ch_ep_num : endpoint or host channel number - * @param len : Number of bytes to write - * @retval HAL status - */ -HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len) -{ - uint32_t count32b = 0 , index = 0; - - count32b = (len + 3) / 4; - for (index = 0; index < count32b; index++, src += 4) - { - USBx_DFIFO(ch_ep_num) = *((__packed uint32_t *)src); - } - return HAL_OK; -} - -/** - * @brief USB_ReadPacket : read a packet from the Tx FIFO associated - * with the EP/channel - * @param USBx : Selected device - * @param dest : destination pointer - * @param len : Number of bytes to read - * @retval pointer to destination buffer - */ -void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len) -{ - uint32_t index = 0; - uint32_t count32b = (len + 3) / 4; - - for ( index = 0; index < count32b; index++, dest += 4 ) - { - *(__packed uint32_t *)dest = USBx_DFIFO(0); - - } - return ((void *)dest); -} - -/** - * @brief USB_EPSetStall : set a stall condition over an EP - * @param USBx : Selected device - * @param ep: pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep) -{ - if (ep->is_in == 1) - { - if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == 0) - { - USBx_INEP(ep->num)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS); - } - USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_STALL; - } - else - { - if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == 0) - { - USBx_OUTEP(ep->num)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS); - } - USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_STALL; - } - return HAL_OK; -} - -/** - * @brief USB_EPClearStall : Clear a stall condition over an EP - * @param USBx : Selected device - * @param ep: pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) -{ - if (ep->is_in == 1) - { - USBx_INEP(ep->num)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; - if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK) - { - USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */ - } - } - else - { - USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; - if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK) - { - USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */ - } - } - return HAL_OK; -} - -/** - * @brief USB_StopDevice : Stop the usb device mode - * @param USBx : Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t index = 0; - - /* Clear Pending interrupt */ - for (index = 0; index < 15 ; index++) - { - USBx_INEP(index)->DIEPINT = 0xFF; - USBx_OUTEP(index)->DOEPINT = 0xFF; - } - USBx_DEVICE->DAINT = 0xFFFFFFFF; - - /* Clear interrupt masks */ - USBx_DEVICE->DIEPMSK = 0; - USBx_DEVICE->DOEPMSK = 0; - USBx_DEVICE->DAINTMSK = 0; - - /* Flush the FIFO */ - USB_FlushRxFifo(USBx); - USB_FlushTxFifo(USBx , 0x10 ); - - return HAL_OK; -} - -/** - * @brief USB_SetDevAddress : Stop the usb device mode - * @param USBx : Selected device - * @param address : new device address to be assigned - * This parameter can be a value from 0 to 255 - * @retval HAL status - */ -HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address) -{ - USBx_DEVICE->DCFG &= ~ (USB_OTG_DCFG_DAD); - USBx_DEVICE->DCFG |= (address << 4) & USB_OTG_DCFG_DAD; - - return HAL_OK; -} - -/** - * @brief USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down - * @param USBx : Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx) -{ - USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS ; - HAL_Delay(3); - - return HAL_OK; -} - -/** - * @brief USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down - * @param USBx : Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx) -{ - USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; - HAL_Delay(3); - - return HAL_OK; -} - -/** - * @brief USB_ReadInterrupts: return the global USB interrupt status - * @param USBx : Selected device - * @retval HAL status - */ -uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t tmpreg = 0; - - tmpreg = USBx->GINTSTS; - tmpreg &= USBx->GINTMSK; - return tmpreg; -} - -/** - * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status - * @param USBx : Selected device - * @retval HAL status - */ -uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t tmpreg = 0; - tmpreg = USBx_DEVICE->DAINT; - tmpreg &= USBx_DEVICE->DAINTMSK; - return ((tmpreg & 0xffff0000) >> 16); -} - -/** - * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status - * @param USBx : Selected device - * @retval HAL status - */ -uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t tmpreg = 0; - tmpreg = USBx_DEVICE->DAINT; - tmpreg &= USBx_DEVICE->DAINTMSK; - return ((tmpreg & 0xFFFF)); -} - -/** - * @brief Returns Device OUT EP Interrupt register - * @param USBx : Selected device - * @param epnum : endpoint number - * This parameter can be a value from 0 to 15 - * @retval Device OUT EP Interrupt register - */ -uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum) -{ - uint32_t tmpreg = 0; - tmpreg = USBx_OUTEP(epnum)->DOEPINT; - tmpreg &= USBx_DEVICE->DOEPMSK; - return tmpreg; -} - -/** - * @brief Returns Device IN EP Interrupt register - * @param USBx : Selected device - * @param epnum : endpoint number - * This parameter can be a value from 0 to 15 - * @retval Device IN EP Interrupt register - */ -uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum) -{ - uint32_t tmpreg = 0, msk = 0, emp = 0; - - msk = USBx_DEVICE->DIEPMSK; - emp = USBx_DEVICE->DIEPEMPMSK; - msk |= ((emp >> epnum) & 0x1) << 7; - tmpreg = USBx_INEP(epnum)->DIEPINT & msk; - return tmpreg; -} - -/** - * @brief USB_ClearInterrupts: clear a USB interrupt - * @param USBx : Selected device - * @param interrupt : interrupt flag - * @retval None - */ -void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt) -{ - USBx->GINTSTS |= interrupt; -} - -/** - * @brief Returns USB core mode - * @param USBx : Selected device - * @retval return core mode : Host or Device - * This parameter can be one of the these values: - * 0 : Host - * 1 : Device - */ -uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx) -{ - return ((USBx->GINTSTS ) & 0x1); -} - -/** - * @brief Activate EP0 for Setup transactions - * @param USBx : Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx) -{ - /* Set the MPS of the IN EP based on the enumeration speed */ - USBx_INEP(0)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ; - - if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ) - { - USBx_INEP(0)->DIEPCTL |= 3; - } - USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK; - - return HAL_OK; -} - -/** - * @brief Prepare the EP0 to start the first control setup - * @param USBx : Selected device - * @param psetup : pointer to setup packet - * @retval HAL status - */ -HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup) -{ - USBx_OUTEP(0)->DOEPTSIZ = 0; - USBx_OUTEP(0)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19)); - USBx_OUTEP(0)->DOEPTSIZ |= (3 * 8); - USBx_OUTEP(0)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_STUPCNT; - - return HAL_OK; -} - -/** - * @brief USB_HostInit : Initializes the USB OTG controller registers - * for Host mode - * @param USBx : Selected device - * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains - * the configuration information for the specified USBx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) -{ - uint32_t index = 0; - - /* Restart the Phy Clock */ - USBx_PCGCCTL = 0; - - /* no VBUS sensing*/ - USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSASEN); - USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSBSEN); - - /* Disable the FS/LS support mode only */ - if((cfg.speed == USB_OTG_SPEED_FULL)&& - (USBx != USB_OTG_FS)) - { - USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS; - } - else - { - USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); - } - - /* Make sure the FIFOs are flushed. */ - USB_FlushTxFifo(USBx, 0x10 ); /* all Tx FIFOs */ - USB_FlushRxFifo(USBx); - - /* Clear all pending HC Interrupts */ - for (index = 0; index < cfg.Host_channels; index++) - { - USBx_HC(index)->HCINT = 0xFFFFFFFF; - USBx_HC(index)->HCINTMSK = 0; - } - - /* Enable VBUS driving */ - USB_DriveVbus(USBx, 1); - - HAL_Delay(200); - - /* Disable all interrupts. */ - USBx->GINTMSK = 0; - - /* Clear any pending interrupts */ - USBx->GINTSTS = 0xFFFFFFFF; - - if(USBx == USB_OTG_FS) - { - /* set Rx FIFO size */ - USBx->GRXFSIZ = (uint32_t )0x80; - USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x60 << 16)& USB_OTG_NPTXFD) | 0x80); - USBx->HPTXFSIZ = (uint32_t )(((0x40 << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0); - } - - /* Enable the common interrupts */ - USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; - - /* Enable interrupts matching to the Host mode ONLY */ - USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM | USB_OTG_GINTMSK_HCIM |\ - USB_OTG_GINTMSK_SOFM |USB_OTG_GINTSTS_DISCINT|\ - USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM); - - return HAL_OK; -} - -/** - * @brief USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the - * HCFG register on the PHY type and set the right frame interval - * @param USBx : Selected device - * @param freq : clock frequency - * This parameter can be one of the these values: - * HCFG_48_MHZ : Full Speed 48 MHz Clock - * HCFG_6_MHZ : Low Speed 6 MHz Clock - * @retval HAL status - */ -HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq) -{ - USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS); - USBx_HOST->HCFG |= (freq & USB_OTG_HCFG_FSLSPCS); - - if (freq == HCFG_48_MHZ) - { - USBx_HOST->HFIR = (uint32_t)48000; - } - else if (freq == HCFG_6_MHZ) - { - USBx_HOST->HFIR = (uint32_t)6000; - } - return HAL_OK; -} - -/** -* @brief USB_OTG_ResetPort : Reset Host Port - * @param USBx : Selected device - * @retval HAL status - * @note : (1)The application must wait at least 10 ms - * before clearing the reset bit. - */ -HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx) -{ - __IO uint32_t hprt0 = 0; - - hprt0 = USBx_HPRT0; - - hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\ - USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG ); - - USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0); - HAL_Delay (10); /* See Note #1 */ - USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0); - return HAL_OK; -} - -/** - * @brief USB_DriveVbus : activate or de-activate vbus - * @param state : VBUS state - * This parameter can be one of the these values: - * 0 : VBUS Active - * 1 : VBUS Inactive - * @retval HAL status -*/ -HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state) -{ - __IO uint32_t hprt0 = 0; - - hprt0 = USBx_HPRT0; - hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\ - USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG ); - - if (((hprt0 & USB_OTG_HPRT_PPWR) == 0 ) && (state == 1 )) - { - USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0); - } - if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0 )) - { - USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0); - } - return HAL_OK; -} - -/** - * @brief Return Host Core speed - * @param USBx : Selected device - * @retval speed : Host speed - * This parameter can be one of the these values: - * @arg USB_OTG_SPEED_FULL: Full speed mode - * @arg USB_OTG_SPEED_LOW: Low speed mode - */ -uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx) -{ - __IO uint32_t hprt0 = 0; - - hprt0 = USBx_HPRT0; - return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17); -} - -/** - * @brief Return Host Current Frame number - * @param USBx : Selected device - * @retval current frame number -*/ -uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx) -{ - return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM); -} - -/** - * @brief Initialize a host channel - * @param USBx : Selected device - * @param ch_num : Channel number - * This parameter can be a value from 1 to 15 - * @param epnum : Endpoint number - * This parameter can be a value from 1 to 15 - * @param dev_address : Current device address - * This parameter can be a value from 0 to 255 - * @param speed : Current device speed - * This parameter can be one of the these values: - * @arg USB_OTG_SPEED_FULL: Full speed mode - * @arg USB_OTG_SPEED_LOW: Low speed mode - * @param ep_type : Endpoint Type - * This parameter can be one of the these values: - * @arg EP_TYPE_CTRL: Control type - * @arg EP_TYPE_ISOC: Isochronous type - * @arg EP_TYPE_BULK: Bulk type - * @arg EP_TYPE_INTR: Interrupt type - * @param mps : Max Packet Size - * This parameter can be a value from 0 to32K - * @retval HAL state - */ -HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, - uint8_t ch_num, - uint8_t epnum, - uint8_t dev_address, - uint8_t speed, - uint8_t ep_type, - uint16_t mps) -{ - /* Clear old interrupt conditions for this host channel. */ - USBx_HC(ch_num)->HCINT = 0xFFFFFFFF; - - /* Enable channel interrupts required for this transfer. */ - switch (ep_type) - { - case EP_TYPE_CTRL: - case EP_TYPE_BULK: - USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\ - USB_OTG_HCINTMSK_STALLM |\ - USB_OTG_HCINTMSK_TXERRM |\ - USB_OTG_HCINTMSK_DTERRM |\ - USB_OTG_HCINTMSK_AHBERR |\ - USB_OTG_HCINTMSK_NAKM ; - - if (epnum & 0x80) - { - USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; - } - break; - - case EP_TYPE_INTR: - USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\ - USB_OTG_HCINTMSK_STALLM |\ - USB_OTG_HCINTMSK_TXERRM |\ - USB_OTG_HCINTMSK_DTERRM |\ - USB_OTG_HCINTMSK_NAKM |\ - USB_OTG_HCINTMSK_AHBERR |\ - USB_OTG_HCINTMSK_FRMORM ; - - if (epnum & 0x80) - { - USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; - } - - break; - - case EP_TYPE_ISOC: - USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\ - USB_OTG_HCINTMSK_ACKM |\ - USB_OTG_HCINTMSK_AHBERR |\ - USB_OTG_HCINTMSK_FRMORM ; - - if (epnum & 0x80) - { - USBx_HC(ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM); - } - break; - } - - /* Enable the top level host channel interrupt. */ - USBx_HOST->HAINTMSK |= (1 << ch_num); - - /* Make sure host channel interrupts are enabled. */ - USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM; - - /* Program the HCCHAR register */ - USBx_HC(ch_num)->HCCHAR = (((dev_address << 22) & USB_OTG_HCCHAR_DAD) |\ - (((epnum & 0x7F)<< 11) & USB_OTG_HCCHAR_EPNUM)|\ - ((((epnum & 0x80) == 0x80)<< 15) & USB_OTG_HCCHAR_EPDIR)|\ - (((speed == HPRT0_PRTSPD_LOW_SPEED)<< 17) & USB_OTG_HCCHAR_LSDEV)|\ - ((ep_type << 18) & USB_OTG_HCCHAR_EPTYP)|\ - (mps & USB_OTG_HCCHAR_MPSIZ)); - - if (ep_type == EP_TYPE_INTR) - { - USBx_HC(ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM ; - } - - return HAL_OK; -} - -/** - * @brief Start a transfer over a host channel - * @param USBx : Selected device - * @param hc : pointer to host channel structure - * @retval HAL state - */ -#if defined (__CC_ARM) /*!< ARM Compiler */ -#pragma O0 -#elif defined (__GNUC__) /*!< GNU Compiler */ -#pragma GCC optimize ("O0") -#endif /* __CC_ARM */ -HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc) -{ - uint8_t is_oddframe = 0; - uint16_t len_words = 0; - uint16_t num_packets = 0; - uint16_t max_hc_pkt_count = 256; - uint32_t tmpreg = 0; - - /* Compute the expected number of packets associated to the transfer */ - if (hc->xfer_len > 0) - { - num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet; - - if (num_packets > max_hc_pkt_count) - { - num_packets = max_hc_pkt_count; - hc->xfer_len = num_packets * hc->max_packet; - } - } - else - { - num_packets = 1; - } - if (hc->ep_is_in) - { - hc->xfer_len = num_packets * hc->max_packet; - } - - /* Initialize the HCTSIZn register */ - USBx_HC(hc->ch_num)->HCTSIZ = (((hc->xfer_len) & USB_OTG_HCTSIZ_XFRSIZ)) |\ - ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) |\ - (((hc->data_pid) << 29) & USB_OTG_HCTSIZ_DPID); - - is_oddframe = (USBx_HOST->HFNUM & 0x01) ? 0 : 1; - USBx_HC(hc->ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM; - USBx_HC(hc->ch_num)->HCCHAR |= (is_oddframe << 29); - - /* Set host channel enable */ - tmpreg = USBx_HC(hc->ch_num)->HCCHAR; - tmpreg &= ~USB_OTG_HCCHAR_CHDIS; - tmpreg |= USB_OTG_HCCHAR_CHENA; - USBx_HC(hc->ch_num)->HCCHAR = tmpreg; - - if((hc->ep_is_in == 0) && (hc->xfer_len > 0)) - { - switch(hc->ep_type) - { - /* Non periodic transfer */ - case EP_TYPE_CTRL: - case EP_TYPE_BULK: - len_words = (hc->xfer_len + 3) / 4; - - /* check if there is enough space in FIFO space */ - if(len_words > (USBx->HNPTXSTS & 0xFFFF)) - { - /* need to process data in nptxfempty interrupt */ - USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM; - } - break; - - /* Periodic transfer */ - case EP_TYPE_INTR: - case EP_TYPE_ISOC: - len_words = (hc->xfer_len + 3) / 4; - /* check if there is enough space in FIFO space */ - if(len_words > (USBx_HOST->HPTXSTS & 0xFFFF)) /* split the transfer */ - { - /* need to process data in ptxfempty interrupt */ - USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM; - } - break; - - default: - break; - } - - /* Write packet into the Tx FIFO. */ - USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, hc->xfer_len); - } - - return HAL_OK; -} - -/** - * @brief Read all host channel interrupts status - * @param USBx : Selected device - * @retval HAL state - */ -uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx) -{ - return ((USBx_HOST->HAINT) & 0xFFFF); -} - -/** - * @brief Halt a host channel - * @param USBx : Selected device - * @param hc_num : Host Channel number - * This parameter can be a value from 1 to 15 - * @retval HAL state - */ -HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num) -{ - uint32_t count = 0; - - /* Check for space in the request queue to issue the halt. */ - if (((USBx_HC(hc_num)->HCCHAR) & (HCCHAR_CTRL << 18)) || ((USBx_HC(hc_num)->HCCHAR) & (HCCHAR_BULK << 18))) - { - USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; - - if ((USBx->HNPTXSTS & 0xFFFF) == 0) - { - USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; - USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA; - USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR; - do - { - if (++count > 1000) - { - break; - } - } - while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); - } - else - { - USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA; - } - } - else - { - USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; - - if ((USBx_HOST->HPTXSTS & 0xFFFF) == 0) - { - USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; - USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA; - USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR; - do - { - if (++count > 1000) - { - break; - } - } - while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); - } - else - { - USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA; - } - } - - return HAL_OK; -} - -/** - * @brief Initiate Do Ping protocol - * @param USBx : Selected device - * @param hc_num : Host Channel number - * This parameter can be a value from 1 to 15 - * @retval HAL state - */ -HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num) -{ - uint8_t num_packets = 1; - uint32_t tmpreg = 0; - - USBx_HC(ch_num)->HCTSIZ = ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) |\ - USB_OTG_HCTSIZ_DOPING; - - /* Set host channel enable */ - tmpreg = USBx_HC(ch_num)->HCCHAR; - tmpreg &= ~USB_OTG_HCCHAR_CHDIS; - tmpreg |= USB_OTG_HCCHAR_CHENA; - USBx_HC(ch_num)->HCCHAR = tmpreg; - - return HAL_OK; -} - -/** - * @brief Stop Host Core - * @param USBx : Selected device - * @retval HAL state - */ -HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx) -{ - uint8_t index; - uint32_t count = 0; - uint32_t value = 0; - - USB_DisableGlobalInt(USBx); - - /* Flush FIFO */ - USB_FlushTxFifo(USBx, 0x10); - USB_FlushRxFifo(USBx); - - /* Flush out any leftover queued requests. */ - for (index = 0; index <= 15; index++) - { - value = USBx_HC(index)->HCCHAR; - value |= USB_OTG_HCCHAR_CHDIS; - value &= ~USB_OTG_HCCHAR_CHENA; - value &= ~USB_OTG_HCCHAR_EPDIR; - USBx_HC(index)->HCCHAR = value; - } - - /* Halt all channels to put them into a known state. */ - for (index = 0; index <= 15; index++) - { - value = USBx_HC(index)->HCCHAR ; - value |= USB_OTG_HCCHAR_CHDIS; - value |= USB_OTG_HCCHAR_CHENA; - value &= ~USB_OTG_HCCHAR_EPDIR; - USBx_HC(index)->HCCHAR = value; - - do - { - if (++count > 1000) - { - break; - } - } - while ((USBx_HC(index)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); - } - - /* Clear any pending Host interrupts */ - USBx_HOST->HAINT = 0xFFFFFFFF; - USBx->GINTSTS = 0xFFFFFFFF; - USB_EnableGlobalInt(USBx); - - return HAL_OK; -} - -/** - * @brief USB_ActivateRemoteWakeup : active remote wakeup signalling - * @param USBx : Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx) -{ - if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) - { - /* active Remote wakeup signalling */ - USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG; - } - return HAL_OK; -} - -/** - * @brief USB_DeActivateRemoteWakeup : de-active remote wakeup signalling - * @param USBx : Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx) -{ - /* active Remote wakeup signalling */ - USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG); - return HAL_OK; -} - -#endif /* USB_OTG_FS */ - -/*============================================================================== - USB Device FS peripheral available on STM32F102xx and STM32F103xx devices -==============================================================================*/ -#if defined (USB) -/** - * @brief Initializes the USB Core - * @param USBx: USB Instance - * @param cfg : pointer to a USB_CfgTypeDef structure that contains - * the configuration information for the specified USBx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg) -{ - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return HAL_OK; -} - -/** - * @brief USB_EnableGlobalInt - * Enables the controller's Global Int in the AHB Config reg - * @param USBx : Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx) -{ - uint32_t winterruptmask = 0; - - /* Set winterruptmask variable */ - winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM \ - | USB_CNTR_ESOFM | USB_CNTR_RESETM; - - /* Set interrupt mask */ - USBx->CNTR |= winterruptmask; - - return HAL_OK; -} - -/** - * @brief USB_DisableGlobalInt - * Disable the controller's Global Int in the AHB Config reg - * @param USBx : Selected device - * @retval HAL status -*/ -HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx) -{ - uint32_t winterruptmask = 0; - - /* Set winterruptmask variable */ - winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM \ - | USB_CNTR_ESOFM | USB_CNTR_RESETM; - - /* Clear interrupt mask */ - USBx->CNTR &= ~winterruptmask; - - return HAL_OK; -} - -/** - * @brief USB_SetCurrentMode : Set functional mode - * @param USBx : Selected device - * @param mode : current core mode - * This parameter can be one of the these values: - * @arg USB_DEVICE_MODE: Peripheral mode mode - * @retval HAL status - */ -HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx , USB_ModeTypeDef mode) -{ - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return HAL_OK; -} - -/** - * @brief USB_DevInit : Initializes the USB controller registers - * for device mode - * @param USBx : Selected device - * @param cfg : pointer to a USB_CfgTypeDef structure that contains - * the configuration information for the specified USBx peripheral. - * @retval HAL status - */ -HAL_StatusTypeDef USB_DevInit (USB_TypeDef *USBx, USB_CfgTypeDef cfg) -{ - /* Init Device */ - /*CNTR_FRES = 1*/ - USBx->CNTR = USB_CNTR_FRES; - - /*CNTR_FRES = 0*/ - USBx->CNTR = 0; - - /*Clear pending interrupts*/ - USBx->ISTR = 0; - - /*Set Btable Address*/ - USBx->BTABLE = BTABLE_ADDRESS; - - return HAL_OK; -} - -/** - * @brief USB_FlushTxFifo : Flush a Tx FIFO - * @param USBx : Selected device - * @param num : FIFO number - * This parameter can be a value from 1 to 15 - 15 means Flush all Tx FIFOs - * @retval HAL status - */ -HAL_StatusTypeDef USB_FlushTxFifo (USB_TypeDef *USBx, uint32_t num ) -{ - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return HAL_OK; -} - -/** - * @brief USB_FlushRxFifo : Flush Rx FIFO - * @param USBx : Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx) -{ - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return HAL_OK; -} - -/** - * @brief Activate and configure an endpoint - * @param USBx : Selected device - * @param ep: pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) -{ - /* initialize Endpoint */ - switch (ep->type) - { - case EP_TYPE_CTRL: - PCD_SET_EPTYPE(USBx, ep->num, USB_EP_CONTROL); - break; - case EP_TYPE_BULK: - PCD_SET_EPTYPE(USBx, ep->num, USB_EP_BULK); - break; - case EP_TYPE_INTR: - PCD_SET_EPTYPE(USBx, ep->num, USB_EP_INTERRUPT); - break; - case EP_TYPE_ISOC: - PCD_SET_EPTYPE(USBx, ep->num, USB_EP_ISOCHRONOUS); - break; - default: - break; - } - - PCD_SET_EP_ADDRESS(USBx, ep->num, ep->num); - - if (ep->doublebuffer == 0) - { - if (ep->is_in) - { - /*Set the endpoint Transmit buffer address */ - PCD_SET_EP_TX_ADDRESS(USBx, ep->num, ep->pmaadress); - PCD_CLEAR_TX_DTOG(USBx, ep->num); - /* Configure NAK status for the Endpoint*/ - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); - } - else - { - /*Set the endpoint Receive buffer address */ - PCD_SET_EP_RX_ADDRESS(USBx, ep->num, ep->pmaadress); - /*Set the endpoint Receive buffer counter*/ - PCD_SET_EP_RX_CNT(USBx, ep->num, ep->maxpacket); - PCD_CLEAR_RX_DTOG(USBx, ep->num); - /* Configure VALID status for the Endpoint*/ - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); - } - } - /*Double Buffer*/ - else - { - /*Set the endpoint as double buffered*/ - PCD_SET_EP_DBUF(USBx, ep->num); - /*Set buffer address for double buffered mode*/ - PCD_SET_EP_DBUF_ADDR(USBx, ep->num,ep->pmaaddr0, ep->pmaaddr1); - - if (ep->is_in==0) - { - /* Clear the data toggle bits for the endpoint IN/OUT*/ - PCD_CLEAR_RX_DTOG(USBx, ep->num); - PCD_CLEAR_TX_DTOG(USBx, ep->num); - - /* Reset value of the data toggle bits for the endpoint out*/ - PCD_TX_DTOG(USBx, ep->num); - - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); - } - else - { - /* Clear the data toggle bits for the endpoint IN/OUT*/ - PCD_CLEAR_RX_DTOG(USBx, ep->num); - PCD_CLEAR_TX_DTOG(USBx, ep->num); - PCD_RX_DTOG(USBx, ep->num); - /* Configure DISABLE status for the Endpoint*/ - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); - } - } - - return HAL_OK; -} - -/** - * @brief De-activate and de-initialize an endpoint - * @param USBx : Selected device - * @param ep: pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) -{ - if (ep->doublebuffer == 0) - { - if (ep->is_in) - { - PCD_CLEAR_TX_DTOG(USBx, ep->num); - /* Configure DISABLE status for the Endpoint*/ - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); - } - else - { - PCD_CLEAR_RX_DTOG(USBx, ep->num); - /* Configure DISABLE status for the Endpoint*/ - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); - } - } - /*Double Buffer*/ - else - { - if (ep->is_in==0) - { - /* Clear the data toggle bits for the endpoint IN/OUT*/ - PCD_CLEAR_RX_DTOG(USBx, ep->num); - PCD_CLEAR_TX_DTOG(USBx, ep->num); - - /* Reset value of the data toggle bits for the endpoint out*/ - PCD_TX_DTOG(USBx, ep->num); - - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); - } - else - { - /* Clear the data toggle bits for the endpoint IN/OUT*/ - PCD_CLEAR_RX_DTOG(USBx, ep->num); - PCD_CLEAR_TX_DTOG(USBx, ep->num); - PCD_RX_DTOG(USBx, ep->num); - /* Configure DISABLE status for the Endpoint*/ - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); - } - } - - return HAL_OK; -} - -/** - * @brief USB_EPStartXfer : setup and starts a transfer over an EP - * @param USBx : Selected device - * @param ep: pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx , USB_EPTypeDef *ep) -{ - uint16_t pmabuffer = 0; - uint32_t len = ep->xfer_len; - - /* IN endpoint */ - if (ep->is_in == 1) - { - /*Multi packet transfer*/ - if (ep->xfer_len > ep->maxpacket) - { - len=ep->maxpacket; - ep->xfer_len-=len; - } - else - { - len=ep->xfer_len; - ep->xfer_len =0; - } - - /* configure and validate Tx endpoint */ - if (ep->doublebuffer == 0) - { - USB_WritePMA(USBx, ep->xfer_buff, ep->pmaadress, len); - PCD_SET_EP_TX_CNT(USBx, ep->num, len); - } - else - { - /* Write the data to the USB endpoint */ - if (PCD_GET_ENDPOINT(USBx, ep->num)& USB_EP_DTOG_TX) - { - /* Set the Double buffer counter for pmabuffer1 */ - PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); - pmabuffer = ep->pmaaddr1; - } - else - { - /* Set the Double buffer counter for pmabuffer0 */ - PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); - pmabuffer = ep->pmaaddr0; - } - USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, len); - PCD_FreeUserBuffer(USBx, ep->num, ep->is_in); - } - - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID); - } - else /* OUT endpoint */ - { - /* Multi packet transfer*/ - if (ep->xfer_len > ep->maxpacket) - { - len=ep->maxpacket; - ep->xfer_len-=len; - } - else - { - len=ep->xfer_len; - ep->xfer_len =0; - } - - /* configure and validate Rx endpoint */ - if (ep->doublebuffer == 0) - { - /*Set RX buffer count*/ - PCD_SET_EP_RX_CNT(USBx, ep->num, len); - } - else - { - /*Set the Double buffer counter*/ - PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, len); - } - - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); - } - - return HAL_OK; -} - -/** - * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated - * with the EP/channel - * @param USBx : Selected device - * @param src : pointer to source buffer - * @param ch_ep_num : endpoint or host channel number - * @param len : Number of bytes to write - * @retval HAL status - */ -HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len) -{ - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return HAL_OK; -} - -/** - * @brief USB_ReadPacket : read a packet from the Tx FIFO associated - * with the EP/channel - * @param USBx : Selected device - * @param dest : destination pointer - * @param len : Number of bytes to read - * @retval pointer to destination buffer - */ -void *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len) -{ - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return ((void *)NULL); -} - -/** - * @brief USB_EPSetStall : set a stall condition over an EP - * @param USBx : Selected device - * @param ep: pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx , USB_EPTypeDef *ep) -{ - if (ep->num == 0) - { - /* This macro sets STALL status for RX & TX*/ - PCD_SET_EP_TXRX_STATUS(USBx, ep->num, USB_EP_RX_STALL, USB_EP_TX_STALL); - } - else - { - if (ep->is_in) - { - PCD_SET_EP_TX_STATUS(USBx, ep->num , USB_EP_TX_STALL); - } - else - { - PCD_SET_EP_RX_STATUS(USBx, ep->num , USB_EP_RX_STALL); - } - } - return HAL_OK; -} - -/** - * @brief USB_EPClearStall : Clear a stall condition over an EP - * @param USBx : Selected device - * @param ep: pointer to endpoint structure - * @retval HAL status - */ -HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep) -{ - if (ep->is_in) - { - PCD_CLEAR_TX_DTOG(USBx, ep->num); - PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID); - } - else - { - PCD_CLEAR_RX_DTOG(USBx, ep->num); - PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); - } - return HAL_OK; -} - -/** - * @brief USB_StopDevice : Stop the usb device mode - * @param USBx : Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx) -{ - /* disable all interrupts and force USB reset */ - USBx->CNTR = USB_CNTR_FRES; - - /* clear interrupt status register */ - USBx->ISTR = 0; - - /* switch-off device */ - USBx->CNTR = (USB_CNTR_FRES | USB_CNTR_PDWN); - - return HAL_OK; -} - -/** - * @brief USB_SetDevAddress : Stop the usb device mode - * @param USBx : Selected device - * @param address : new device address to be assigned - * This parameter can be a value from 0 to 255 - * @retval HAL status - */ -HAL_StatusTypeDef USB_SetDevAddress (USB_TypeDef *USBx, uint8_t address) -{ - if(address == 0) - { - /* set device address and enable function */ - USBx->DADDR = USB_DADDR_EF; - } - - return HAL_OK; -} - -/** - * @brief USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down - * @param USBx : Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DevConnect (USB_TypeDef *USBx) -{ - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return HAL_OK; -} - -/** - * @brief USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down - * @param USBx : Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DevDisconnect (USB_TypeDef *USBx) -{ - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return HAL_OK; -} - -/** - * @brief USB_ReadInterrupts: return the global USB interrupt status - * @param USBx : Selected device - * @retval HAL status - */ -uint32_t USB_ReadInterrupts (USB_TypeDef *USBx) -{ - uint32_t tmpreg = 0; - - tmpreg = USBx->ISTR; - return tmpreg; -} - -/** - * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status - * @param USBx : Selected device - * @retval HAL status - */ -uint32_t USB_ReadDevAllOutEpInterrupt (USB_TypeDef *USBx) -{ - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return (0); -} - -/** - * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status - * @param USBx : Selected device - * @retval HAL status - */ -uint32_t USB_ReadDevAllInEpInterrupt (USB_TypeDef *USBx) -{ - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return (0); -} - -/** - * @brief Returns Device OUT EP Interrupt register - * @param USBx : Selected device - * @param epnum : endpoint number - * This parameter can be a value from 0 to 15 - * @retval Device OUT EP Interrupt register - */ -uint32_t USB_ReadDevOutEPInterrupt (USB_TypeDef *USBx , uint8_t epnum) -{ - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return (0); -} - -/** - * @brief Returns Device IN EP Interrupt register - * @param USBx : Selected device - * @param epnum : endpoint number - * This parameter can be a value from 0 to 15 - * @retval Device IN EP Interrupt register - */ -uint32_t USB_ReadDevInEPInterrupt (USB_TypeDef *USBx , uint8_t epnum) -{ - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return (0); -} - -/** - * @brief USB_ClearInterrupts: clear a USB interrupt - * @param USBx : Selected device - * @param interrupt : interrupt flag - * @retval None - */ -void USB_ClearInterrupts (USB_TypeDef *USBx, uint32_t interrupt) -{ - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ -} - -/** - * @brief Prepare the EP0 to start the first control setup - * @param USBx : Selected device - * @param psetup : pointer to setup packet - * @retval HAL status - */ -HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup) -{ - /* NOTE : - This function is not required by USB Device FS peripheral, it is used - only by USB OTG FS peripheral. - - This function is added to ensure compatibility across platforms. - */ - return HAL_OK; -} - -/** - * @brief USB_ActivateRemoteWakeup : active remote wakeup signalling - * @param USBx : Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx) -{ - USBx->CNTR |= USB_CNTR_RESUME; - - return HAL_OK; -} - -/** - * @brief USB_DeActivateRemoteWakeup : de-active remote wakeup signalling - * @param USBx : Selected device - * @retval HAL status - */ -HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx) -{ - USBx->CNTR &= ~(USB_CNTR_RESUME); - return HAL_OK; -} - -/** - * @brief Copy a buffer from user memory area to packet memory area (PMA) - * @param USBx : pointer to USB register. - * @param pbUsrBuf : pointer to user memory area. - * @param wPMABufAddr : address into PMA. - * @param wNBytes : number of bytes to be copied. - * @retval None - */ -void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) -{ - uint32_t nbytes = (wNBytes + 1) >> 1; /* nbytes = (wNBytes + 1) / 2 */ - uint32_t index = 0, temp1 = 0, temp2 = 0; - uint16_t *pdwVal = NULL; - - pdwVal = (uint16_t *)(wPMABufAddr * 2 + (uint32_t)USBx + 0x400); - for (index = nbytes; index != 0; index--) - { - temp1 = (uint16_t) * pbUsrBuf; - pbUsrBuf++; - temp2 = temp1 | (uint16_t) * pbUsrBuf << 8; - *pdwVal++ = temp2; - pdwVal++; - pbUsrBuf++; - } -} - -/** - * @brief Copy a buffer from user memory area to packet memory area (PMA) - * @param USBx : pointer to USB register. -* @param pbUsrBuf : pointer to user memory area. - * @param wPMABufAddr : address into PMA. - * @param wNBytes : number of bytes to be copied. - * @retval None - */ -void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) -{ - uint32_t nbytes = (wNBytes + 1) >> 1;/* /2*/ - uint32_t index = 0; - uint32_t *pdwVal = NULL; - - pdwVal = (uint32_t *)(wPMABufAddr * 2 + (uint32_t)USBx + 0x400); - for (index = nbytes; index != 0; index--) - { - *(uint16_t*)pbUsrBuf++ = *pdwVal++; - pbUsrBuf++; - } -} - -#endif /* USB */ - -/** - * @} - */ -/** - * @} - */ - -#if defined (USB_OTG_FS) -/** @addtogroup USB_LL_Private_Functions - * @{ - */ -/** - * @brief Reset the USB Core (needed after USB clock settings change) - * @param USBx : Selected device - * @retval HAL status - */ -static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx) -{ - uint32_t count = 0; - - /* Wait for AHB master IDLE state. */ - do - { - if (++count > 200000) - { - return HAL_TIMEOUT; - } - } - while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0); - - /* Core Soft Reset */ - count = 0; - USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST; - - do - { - if (++count > 200000) - { - return HAL_TIMEOUT; - } - } - while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST); - - return HAL_OK; -} -/** - * @} - */ -#endif /* USB_OTG_FS */ - -#endif /* STM32F102x6 || STM32F102xB || */ - /* STM32F103x6 || STM32F103xB || */ - /* STM32F103xE || STM32F103xG || */ - /* STM32F105xC || STM32F107xC */ - -#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */ - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |