diff options
Diffstat (limited to 'stm32cubemx/Src/stm32f1xx_hal_msp.c')
| -rw-r--r-- | stm32cubemx/Src/stm32f1xx_hal_msp.c | 240 |
1 files changed, 0 insertions, 240 deletions
diff --git a/stm32cubemx/Src/stm32f1xx_hal_msp.c b/stm32cubemx/Src/stm32f1xx_hal_msp.c deleted file mode 100644 index b90d153..0000000 --- a/stm32cubemx/Src/stm32f1xx_hal_msp.c +++ /dev/null @@ -1,240 +0,0 @@ -/** - ****************************************************************************** - * File Name : stm32f1xx_hal_msp.c - * Description : This file provides code for the MSP Initialization - * and de-Initialization codes. - ****************************************************************************** - * - * Copyright (c) 2017 STMicroelectronics International N.V. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted, provided that the following conditions are met: - * - * 1. Redistribution of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of other - * contributors to this software may be used to endorse or promote products - * derived from this software without specific written permission. - * 4. This software, including modifications and/or derivative works of this - * software, must execute solely and exclusively on microcontroller or - * microprocessor devices manufactured by or for STMicroelectronics. - * 5. Redistribution and use of this software other than as permitted under - * this license is void and will automatically terminate your rights under - * this license. - * - * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A - * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY - * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT - * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -extern DMA_HandleTypeDef hdma_tim1_ch1; - -extern void Error_Handler(void); -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ -/** - * Initializes the Global MSP. - */ -void HAL_MspInit(void) -{ - /* USER CODE BEGIN MspInit 0 */ - - /* USER CODE END MspInit 0 */ - - __HAL_RCC_AFIO_CLK_ENABLE(); - - HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4); - - /* System interrupt init*/ - /* MemoryManagement_IRQn interrupt configuration */ - HAL_NVIC_SetPriority(MemoryManagement_IRQn, 0, 0); - /* BusFault_IRQn interrupt configuration */ - HAL_NVIC_SetPriority(BusFault_IRQn, 0, 0); - /* UsageFault_IRQn interrupt configuration */ - HAL_NVIC_SetPriority(UsageFault_IRQn, 0, 0); - /* SVCall_IRQn interrupt configuration */ - HAL_NVIC_SetPriority(SVCall_IRQn, 0, 0); - /* DebugMonitor_IRQn interrupt configuration */ - HAL_NVIC_SetPriority(DebugMonitor_IRQn, 0, 0); - /* PendSV_IRQn interrupt configuration */ - HAL_NVIC_SetPriority(PendSV_IRQn, 0, 0); - /* SysTick_IRQn interrupt configuration */ - HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0); - - /**NOJTAG: JTAG-DP Disabled and SW-DP Enabled - */ - __HAL_AFIO_REMAP_SWJ_NOJTAG(); - - /* USER CODE BEGIN MspInit 1 */ - - /* USER CODE END MspInit 1 */ -} - -void HAL_TIM_IC_MspInit(TIM_HandleTypeDef* htim_ic) -{ - - GPIO_InitTypeDef GPIO_InitStruct; - if(htim_ic->Instance==TIM1) - { - /* USER CODE BEGIN TIM1_MspInit 0 */ - - /* USER CODE END TIM1_MspInit 0 */ - /* Peripheral clock enable */ - __HAL_RCC_TIM1_CLK_ENABLE(); - - /**TIM1 GPIO Configuration - PA8 ------> TIM1_CH1 - */ - GPIO_InitStruct.Pin = GPIO_PIN_8; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* Peripheral DMA init*/ - - hdma_tim1_ch1.Instance = DMA1_Channel2; - hdma_tim1_ch1.Init.Direction = DMA_PERIPH_TO_MEMORY; - hdma_tim1_ch1.Init.PeriphInc = DMA_PINC_DISABLE; - hdma_tim1_ch1.Init.MemInc = DMA_MINC_ENABLE; - hdma_tim1_ch1.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD; - hdma_tim1_ch1.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD; - hdma_tim1_ch1.Init.Mode = DMA_NORMAL; - hdma_tim1_ch1.Init.Priority = DMA_PRIORITY_LOW; - if (HAL_DMA_Init(&hdma_tim1_ch1) != HAL_OK) - { - Error_Handler(); - } - - __HAL_LINKDMA(htim_ic,hdma[TIM_DMA_ID_CC1],hdma_tim1_ch1); - - /* Peripheral interrupt init */ - HAL_NVIC_SetPriority(TIM1_TRG_COM_IRQn, 1, 0); - HAL_NVIC_EnableIRQ(TIM1_TRG_COM_IRQn); - HAL_NVIC_SetPriority(TIM1_CC_IRQn, 1, 0); - HAL_NVIC_EnableIRQ(TIM1_CC_IRQn); - /* USER CODE BEGIN TIM1_MspInit 1 */ - - /* USER CODE END TIM1_MspInit 1 */ - } - -} - -void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef* htim_ic) -{ - - if(htim_ic->Instance==TIM1) - { - /* USER CODE BEGIN TIM1_MspDeInit 0 */ - - /* USER CODE END TIM1_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_TIM1_CLK_DISABLE(); - - /**TIM1 GPIO Configuration - PA8 ------> TIM1_CH1 - */ - HAL_GPIO_DeInit(GPIOA, GPIO_PIN_8); - - /* Peripheral DMA DeInit*/ - HAL_DMA_DeInit(htim_ic->hdma[TIM_DMA_ID_CC1]); - - /* Peripheral interrupt DeInit*/ - HAL_NVIC_DisableIRQ(TIM1_TRG_COM_IRQn); - - HAL_NVIC_DisableIRQ(TIM1_CC_IRQn); - - } - /* USER CODE BEGIN TIM1_MspDeInit 1 */ - - /* USER CODE END TIM1_MspDeInit 1 */ - -} - -void HAL_UART_MspInit(UART_HandleTypeDef* huart) -{ - - GPIO_InitTypeDef GPIO_InitStruct; - if(huart->Instance==USART2) - { - /* USER CODE BEGIN USART2_MspInit 0 */ - - /* USER CODE END USART2_MspInit 0 */ - /* Peripheral clock enable */ - __HAL_RCC_USART2_CLK_ENABLE(); - - /**USART2 GPIO Configuration - PA2 ------> USART2_TX - PA3 ------> USART2_RX - */ - GPIO_InitStruct.Pin = GPIO_PIN_2; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - GPIO_InitStruct.Pin = GPIO_PIN_3; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* USER CODE BEGIN USART2_MspInit 1 */ - - /* USER CODE END USART2_MspInit 1 */ - } - -} - -void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) -{ - - if(huart->Instance==USART2) - { - /* USER CODE BEGIN USART2_MspDeInit 0 */ - - /* USER CODE END USART2_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_USART2_CLK_DISABLE(); - - /**USART2 GPIO Configuration - PA2 ------> USART2_TX - PA3 ------> USART2_RX - */ - HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3); - - } - /* USER CODE BEGIN USART2_MspDeInit 1 */ - - /* USER CODE END USART2_MspDeInit 1 */ - -} - -/* USER CODE BEGIN 1 */ - -/* USER CODE END 1 */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |